Imported Upstream version 1.7.0upstream/1.7.0

1 files changed, 0 insertions, 384 deletions

diff --git a/jpg/jddctmgr.c b/jpg/jddctmgr.c
deleted file mode 100644
index 0ded9d5..0000000
--- a/jpg/jddctmgr.c
+++ /dev/null
@@ -1,384 +0,0 @@
-/*
- * jddctmgr.c
- *
- * Copyright (C) 1994-1996, Thomas G. Lane.
- * Modified 2002-2010 by Guido Vollbeding.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains the inverse-DCT management logic.
- * This code selects a particular IDCT implementation to be used,
- * and it performs related housekeeping chores.  No code in this file
- * is executed per IDCT step, only during output pass setup.
- *
- * Note that the IDCT routines are responsible for performing coefficient
- * dequantization as well as the IDCT proper.  This module sets up the
- * dequantization multiplier table needed by the IDCT routine.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-#include "jdct.h"		/* Private declarations for DCT subsystem */
-
-
-/*
- * The decompressor input side (jdinput.c) saves away the appropriate
- * quantization table for each component at the start of the first scan
- * involving that component.  (This is necessary in order to correctly
- * decode files that reuse Q-table slots.)
- * When we are ready to make an output pass, the saved Q-table is converted
- * to a multiplier table that will actually be used by the IDCT routine.
- * The multiplier table contents are IDCT-method-dependent.  To support
- * application changes in IDCT method between scans, we can remake the
- * multiplier tables if necessary.
- * In buffered-image mode, the first output pass may occur before any data
- * has been seen for some components, and thus before their Q-tables have
- * been saved away.  To handle this case, multiplier tables are preset
- * to zeroes; the result of the IDCT will be a neutral gray level.
- */
-
-
-/* Private subobject for this module */
-
-typedef struct {
-  struct jpeg_inverse_dct pub;	/* public fields */
-
-  /* This array contains the IDCT method code that each multiplier table
-   * is currently set up for, or -1 if it's not yet set up.
-   * The actual multiplier tables are pointed to by dct_table in the
-   * per-component comp_info structures.
-   */
-  int cur_method[MAX_COMPONENTS];
-} my_idct_controller;
-
-typedef my_idct_controller * my_idct_ptr;
-
-
-/* Allocated multiplier tables: big enough for any supported variant */
-
-typedef union {
-  ISLOW_MULT_TYPE islow_array[DCTSIZE2];
-#ifdef DCT_IFAST_SUPPORTED
-  IFAST_MULT_TYPE ifast_array[DCTSIZE2];
-#endif
-#ifdef DCT_FLOAT_SUPPORTED
-  FLOAT_MULT_TYPE float_array[DCTSIZE2];
-#endif
-} multiplier_table;
-
-
-/* The current scaled-IDCT routines require ISLOW-style multiplier tables,
- * so be sure to compile that code if either ISLOW or SCALING is requested.
- */
-#ifdef DCT_ISLOW_SUPPORTED
-#define PROVIDE_ISLOW_TABLES
-#else
-#ifdef IDCT_SCALING_SUPPORTED
-#define PROVIDE_ISLOW_TABLES
-#endif
-#endif
-
-
-/*
- * Prepare for an output pass.
- * Here we select the proper IDCT routine for each component and build
- * a matching multiplier table.
- */
-
-METHODDEF(void)
-start_pass (j_decompress_ptr cinfo)
-{
-  my_idct_ptr idct = (my_idct_ptr) cinfo->idct;
-  int ci, i;
-  jpeg_component_info *compptr;
-  int method = 0;
-  inverse_DCT_method_ptr method_ptr = NULL;
-  JQUANT_TBL * qtbl;
-
-  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
-       ci++, compptr++) {
-    /* Select the proper IDCT routine for this component's scaling */
-    switch ((compptr->DCT_h_scaled_size << 8) + compptr->DCT_v_scaled_size) {
-#ifdef IDCT_SCALING_SUPPORTED
-    case ((1 << 8) + 1):
-      method_ptr = jpeg_idct_1x1;
-      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
-      break;
-    case ((2 << 8) + 2):
-      method_ptr = jpeg_idct_2x2;
-      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
-      break;
-    case ((3 << 8) + 3):
-      method_ptr = jpeg_idct_3x3;
-      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
-      break;
-    case ((4 << 8) + 4):
-      method_ptr = jpeg_idct_4x4;
-      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
-      break;
-    case ((5 << 8) + 5):
-      method_ptr = jpeg_idct_5x5;
-      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
-      break;
-    case ((6 << 8) + 6):
-      method_ptr = jpeg_idct_6x6;
-      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
-      break;
-    case ((7 << 8) + 7):
-      method_ptr = jpeg_idct_7x7;
-      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
-      break;
-    case ((9 << 8) + 9):
-      method_ptr = jpeg_idct_9x9;
-      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
-      break;
-    case ((10 << 8) + 10):
-      method_ptr = jpeg_idct_10x10;
-      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
-      break;
-    case ((11 << 8) + 11):
-      method_ptr = jpeg_idct_11x11;
-      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
-      break;
-    case ((12 << 8) + 12):
-      method_ptr = jpeg_idct_12x12;
-      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
-      break;
-    case ((13 << 8) + 13):
-      method_ptr = jpeg_idct_13x13;
-      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
-      break;
-    case ((14 << 8) + 14):
-      method_ptr = jpeg_idct_14x14;
-      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
-      break;
-    case ((15 << 8) + 15):
-      method_ptr = jpeg_idct_15x15;
-      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
-      break;
-    case ((16 << 8) + 16):
-      method_ptr = jpeg_idct_16x16;
-      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
-      break;
-    case ((16 << 8) + 8):
-      method_ptr = jpeg_idct_16x8;
-      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
-      break;
-    case ((14 << 8) + 7):
-      method_ptr = jpeg_idct_14x7;
-      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
-      break;
-    case ((12 << 8) + 6):
-      method_ptr = jpeg_idct_12x6;
-      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
-      break;
-    case ((10 << 8) + 5):
-      method_ptr = jpeg_idct_10x5;
-      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
-      break;
-    case ((8 << 8) + 4):
-      method_ptr = jpeg_idct_8x4;
-      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
-      break;
-    case ((6 << 8) + 3):
-      method_ptr = jpeg_idct_6x3;
-      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
-      break;
-    case ((4 << 8) + 2):
-      method_ptr = jpeg_idct_4x2;
-      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
-      break;
-    case ((2 << 8) + 1):
-      method_ptr = jpeg_idct_2x1;
-      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
-      break;
-    case ((8 << 8) + 16):
-      method_ptr = jpeg_idct_8x16;
-      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
-      break;
-    case ((7 << 8) + 14):
-      method_ptr = jpeg_idct_7x14;
-      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
-      break;
-    case ((6 << 8) + 12):
-      method_ptr = jpeg_idct_6x12;
-      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
-      break;
-    case ((5 << 8) + 10):
-      method_ptr = jpeg_idct_5x10;
-      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
-      break;
-    case ((4 << 8) + 8):
-      method_ptr = jpeg_idct_4x8;
-      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
-      break;
-    case ((3 << 8) + 6):
-      method_ptr = jpeg_idct_3x6;
-      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
-      break;
-    case ((2 << 8) + 4):
-      method_ptr = jpeg_idct_2x4;
-      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
-      break;
-    case ((1 << 8) + 2):
-      method_ptr = jpeg_idct_1x2;
-      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
-      break;
-#endif
-    case ((DCTSIZE << 8) + DCTSIZE):
-      switch (cinfo->dct_method) {
-#ifdef DCT_ISLOW_SUPPORTED
-      case JDCT_ISLOW:
-	method_ptr = jpeg_idct_islow;
-	method = JDCT_ISLOW;
-	break;
-#endif
-#ifdef DCT_IFAST_SUPPORTED
-      case JDCT_IFAST:
-	method_ptr = jpeg_idct_ifast;
-	method = JDCT_IFAST;
-	break;
-#endif
-#ifdef DCT_FLOAT_SUPPORTED
-      case JDCT_FLOAT:
-	method_ptr = jpeg_idct_float;
-	method = JDCT_FLOAT;
-	break;
-#endif
-      default:
-	ERREXIT(cinfo, JERR_NOT_COMPILED);
-	break;
-      }
-      break;
-    default:
-      ERREXIT2(cinfo, JERR_BAD_DCTSIZE,
-	       compptr->DCT_h_scaled_size, compptr->DCT_v_scaled_size);
-      break;
-    }
-    idct->pub.inverse_DCT[ci] = method_ptr;
-    /* Create multiplier table from quant table.
-     * However, we can skip this if the component is uninteresting
-     * or if we already built the table.  Also, if no quant table
-     * has yet been saved for the component, we leave the
-     * multiplier table all-zero; we'll be reading zeroes from the
-     * coefficient controller's buffer anyway.
-     */
-    if (! compptr->component_needed || idct->cur_method[ci] == method)
-      continue;
-    qtbl = compptr->quant_table;
-    if (qtbl == NULL)		/* happens if no data yet for component */
-      continue;
-    idct->cur_method[ci] = method;
-    switch (method) {
-#ifdef PROVIDE_ISLOW_TABLES
-    case JDCT_ISLOW:
-      {
-	/* For LL&M IDCT method, multipliers are equal to raw quantization
-	 * coefficients, but are stored as ints to ensure access efficiency.
-	 */
-	ISLOW_MULT_TYPE * ismtbl = (ISLOW_MULT_TYPE *) compptr->dct_table;
-	for (i = 0; i < DCTSIZE2; i++) {
-	  ismtbl[i] = (ISLOW_MULT_TYPE) qtbl->quantval[i];
-	}
-      }
-      break;
-#endif
-#ifdef DCT_IFAST_SUPPORTED
-    case JDCT_IFAST:
-      {
-	/* For AA&N IDCT method, multipliers are equal to quantization
-	 * coefficients scaled by scalefactor[row]*scalefactor[col], where
-	 *   scalefactor[0] = 1
-	 *   scalefactor[k] = cos(k*PI/16) * sqrt(2)    for k=1..7
-	 * For integer operation, the multiplier table is to be scaled by
-	 * IFAST_SCALE_BITS.
-	 */
-	IFAST_MULT_TYPE * ifmtbl = (IFAST_MULT_TYPE *) compptr->dct_table;
-#define CONST_BITS 14
-	static const INT16 aanscales[DCTSIZE2] = {
-	  /* precomputed values scaled up by 14 bits */
-	  16384, 22725, 21407, 19266, 16384, 12873,  8867,  4520,
-	  22725, 31521, 29692, 26722, 22725, 17855, 12299,  6270,
-	  21407, 29692, 27969, 25172, 21407, 16819, 11585,  5906,
-	  19266, 26722, 25172, 22654, 19266, 15137, 10426,  5315,
-	  16384, 22725, 21407, 19266, 16384, 12873,  8867,  4520,
-	  12873, 17855, 16819, 15137, 12873, 10114,  6967,  3552,
-	   8867, 12299, 11585, 10426,  8867,  6967,  4799,  2446,
-	   4520,  6270,  5906,  5315,  4520,  3552,  2446,  1247
-	};
-	SHIFT_TEMPS
-
-	for (i = 0; i < DCTSIZE2; i++) {
-	  ifmtbl[i] = (IFAST_MULT_TYPE)
-	    DESCALE(MULTIPLY16V16((INT32) qtbl->quantval[i],
-				  (INT32) aanscales[i]),
-		    CONST_BITS-IFAST_SCALE_BITS);
-	}
-      }
-      break;
-#endif
-#ifdef DCT_FLOAT_SUPPORTED
-    case JDCT_FLOAT:
-      {
-	/* For float AA&N IDCT method, multipliers are equal to quantization
-	 * coefficients scaled by scalefactor[row]*scalefactor[col], where
-	 *   scalefactor[0] = 1
-	 *   scalefactor[k] = cos(k*PI/16) * sqrt(2)    for k=1..7
-	 * We apply a further scale factor of 1/8.
-	 */
-	FLOAT_MULT_TYPE * fmtbl = (FLOAT_MULT_TYPE *) compptr->dct_table;
-	int row, col;
-	static const double aanscalefactor[DCTSIZE] = {
-	  1.0, 1.387039845, 1.306562965, 1.175875602,
-	  1.0, 0.785694958, 0.541196100, 0.275899379
-	};
-
-	i = 0;
-	for (row = 0; row < DCTSIZE; row++) {
-	  for (col = 0; col < DCTSIZE; col++) {
-	    fmtbl[i] = (FLOAT_MULT_TYPE)
-	      ((double) qtbl->quantval[i] *
-	       aanscalefactor[row] * aanscalefactor[col] * 0.125);
-	    i++;
-	  }
-	}
-      }
-      break;
-#endif
-    default:
-      ERREXIT(cinfo, JERR_NOT_COMPILED);
-      break;
-    }
-  }
-}
-
-
-/*
- * Initialize IDCT manager.
- */
-
-GLOBAL(void)
-jinit_inverse_dct (j_decompress_ptr cinfo)
-{
-  my_idct_ptr idct;
-  int ci;
-  jpeg_component_info *compptr;
-
-  idct = (my_idct_ptr)
-    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-				SIZEOF(my_idct_controller));
-  cinfo->idct = (struct jpeg_inverse_dct *) idct;
-  idct->pub.start_pass = start_pass;
-
-  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
-       ci++, compptr++) {
-    /* Allocate and pre-zero a multiplier table for each component */
-    compptr->dct_table =
-      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-				  SIZEOF(multiplier_table));
-    MEMZERO(compptr->dct_table, SIZEOF(multiplier_table));
-    /* Mark multiplier table not yet set up for any method */
-    idct->cur_method[ci] = -1;
-  }
-}