diff options
author | Jörg Frings-Fürst <debian@jff-webhosting.net> | 2015-05-01 16:13:57 +0200 |
---|---|---|
committer | Jörg Frings-Fürst <debian@jff-webhosting.net> | 2015-05-01 16:13:57 +0200 |
commit | 094535c010320967639e8e86f974d878e80baa72 (patch) | |
tree | efc3094b20355dcbeebb2c4ece4fcfc69bffedb5 /spectro/hcfr.c | |
parent | c07d0c2d2f6f7b0eb6e92cc6204bf05037957e82 (diff) |
Imported Upstream version 1.7.0upstream/1.7.0
Diffstat (limited to 'spectro/hcfr.c')
-rw-r--r-- | spectro/hcfr.c | 188 |
1 files changed, 132 insertions, 56 deletions
diff --git a/spectro/hcfr.c b/spectro/hcfr.c index c67a419..e5e1288 100644 --- a/spectro/hcfr.c +++ b/spectro/hcfr.c @@ -32,6 +32,13 @@ and agreed to support. */ +/* + TTBD: + Should really switch this to be high speed serial type of coms, + now that this is supported by inst API. + + */ + #include <stdio.h> #include <stdlib.h> #include <ctype.h> @@ -78,7 +85,7 @@ hcfr_command( ) { int rv, se; - if ((se = p->icom->write_read(p->icom, in, out, bsize, "\n", 1, to)) != 0) { + if ((se = p->icom->write_read(p->icom, in, 0, out, bsize, NULL, "\n", 1, to)) != 0) { int ec; a1logd(p->log, 1, "hcfr_command: serial i/o failure on write_read '%s'\n",icoms_fix(in)); return hcfr_interp_code((inst *)p, icoms2hcfr_err(se)); @@ -89,7 +96,7 @@ hcfr_command( } /* Do a break to check coms is working */ -inst_code +static inst_code hcfr_break( hcfr *p ) { @@ -108,7 +115,7 @@ hcfr_break( } /* Flush an pending messages from the device */ -inst_code +static inst_code hcfr_flush( hcfr *p ) { @@ -118,7 +125,7 @@ hcfr_flush( int rv; for (rv = ICOM_OK;;) { - rv = c->read(c, buf, MAX_MES_SIZE, '\000', 100000, 0.05); + rv = c->read(c, buf, MAX_MES_SIZE, NULL, '\000', 100000, 0.05); if (rv != ICOM_OK) break; /* Expect timeout with nothing to read */ } @@ -128,7 +135,7 @@ hcfr_flush( } /* Get and check the firmware version */ -inst_code +static inst_code hcfr_get_check_version( hcfr *p, int *pmaj, @@ -175,7 +182,7 @@ hcfr_get_check_version( } /* Get a raw measurement value */ -inst_code +static inst_code hcfr_get_rgb( hcfr *p, double rgb[3] /* return value */ @@ -263,7 +270,7 @@ hcfr_get_rgb( /* The basic calibration data is from my particular HCFR, measured */ /* against one of my CRT and LCD displays, with the reference XYZ */ /* derived from my i1pro. */ -inst_code +static inst_code hcfr_comp_matrix( hcfr *p ) { @@ -370,9 +377,6 @@ hcfr_init_coms(inst *pp, baud_rate br, flow_control fc, double tout) { if (p->icom->port_type(p->icom) != icomt_usb) { a1logd(p->log, 1, "hcfr_init_coms: expect hcfr to be USB\n"); return hcfr_interp_code((inst *)p, HCFR_UNKNOWN_MODEL); - } else { - a1logd(p->log, 1, "hcfr_init_coms: wrong communications type for device!\n"); - return inst_coms_fail; } /* Set config, interface, "Serial" write & read end points */ @@ -515,30 +519,46 @@ instClamping clamp) { /* NZ if clamp XYZ/Lab to be +ve */ return inst_ok; } +static inst_code set_base_disp_type(hcfr *p, int cbid); + /* Insert a colorimetric correction matrix in the instrument XYZ readings */ /* This is only valid for colorimetric instruments. */ /* To remove the matrix, pass NULL for the filter filename */ -inst_code hcfr_col_cor_mat( +static inst_code hcfr_col_cor_mat( inst *pp, +disptech dtech, /* Use disptech_unknown if not known */ \ +int cbid, /* Calibration display type base ID, 1 if unknown */\ double mtx[3][3] ) { hcfr *p = (hcfr *)pp; + inst_code ev; if (!p->gotcoms) return inst_no_coms; if (!p->inited) return inst_no_init; - if (mtx == NULL) { + if ((ev = set_base_disp_type(p, cbid)) != inst_ok) + return ev; + if (mtx == NULL) icmSetUnity3x3(p->ccmat); - } else { - if (p->cbid == 0) { - a1loge(p->log, 1, "hcfr: can't set col_cor_mat over non-base display type\n"); - return inst_wrong_setup; - } + else icmCpy3x3(p->ccmat, mtx); + p->dtech = dtech; + p->refrmode = disptech_get_id(dtech)->refr; + p->cbid = 0; /* Can't be base type now */ + + if (p->log->debug >= 4) { + a1logd(p->log,4,"ccmat = %f %f %f\n", + p->ccmat[0][0], p->ccmat[0][1], p->ccmat[0][2]); + a1logd(p->log,4," %f %f %f\n", + p->ccmat[1][0], p->ccmat[1][1], p->ccmat[1][2]); + a1logd(p->log,4," %f %f %f\n\n", + p->ccmat[2][0], p->ccmat[2][1], p->ccmat[2][2]); + a1logd(p->log,4,"ucbid = %d, cbid = %d\n",p->ucbid, p->cbid); + a1logd(p->log,4,"\n"); } - + return inst_ok; } @@ -621,7 +641,7 @@ hcfr_del(inst *pp) { } /* Return the instrument mode capabilities */ -void hcfr_capabilities(inst *pp, +static void hcfr_capabilities(inst *pp, inst_mode *pcap1, inst2_capability *pcap2, inst3_capability *pcap3) { @@ -648,7 +668,7 @@ inst3_capability *pcap3) { } /* Check device measurement mode */ -inst_code hcfr_check_mode(inst *pp, inst_mode m) { +static inst_code hcfr_check_mode(inst *pp, inst_mode m) { inst_mode cap; if (!pp->gotcoms) @@ -671,7 +691,7 @@ inst_code hcfr_check_mode(inst *pp, inst_mode m) { } /* Set device measurement mode */ -inst_code hcfr_set_mode(inst *pp, inst_mode m) { +static inst_code hcfr_set_mode(inst *pp, inst_mode m) { inst_code ev; if ((ev = hcfr_check_mode(pp, m)) != inst_ok) @@ -680,21 +700,23 @@ inst_code hcfr_set_mode(inst *pp, inst_mode m) { return inst_ok; } -inst_disptypesel hcfr_disptypesel[4] = { +static inst_disptypesel hcfr_disptypesel[4] = { { inst_dtflags_default, 0, "l", "LCD display", 0, + disptech_lcd, 0 }, { inst_dtflags_none, /* flags */ - 0, /* cbix */ + 0, /* cbid */ "c", /* sel */ "CRT display", /* desc */ 0, /* refr */ + disptech_crt, /* disptype */ 1 /* ix */ }, { @@ -703,6 +725,7 @@ inst_disptypesel hcfr_disptypesel[4] = { "R", "Raw Reading", 0, + disptech_unknown, 2 }, { @@ -711,6 +734,7 @@ inst_disptypesel hcfr_disptypesel[4] = { "", "", 0, + disptech_none, 0 } }; @@ -745,15 +769,58 @@ int recreate /* nz to re-check for new ccmx & ccss files */ /* Given a display type entry, setup for that type */ static inst_code set_disp_type(hcfr *p, inst_disptypesel *dentry) { - p->ix = dentry->ix; - p->refrmode = dentry->refr; - p->cbid = dentry->cbid; - if (dentry->flags & inst_dtflags_ccmx) { + inst_code ev; + if ((ev = set_base_disp_type(p, dentry->cc_cbid)) != inst_ok) + return ev; icmCpy3x3(p->ccmat, dentry->mat); + p->dtech = dentry->dtech; + p->cbid = 0; /* Can't be a base type */ + } else { + + p->ix = dentry->ix; + p->dtech = dentry->dtech; + p->cbid = dentry->cbid; + p->ucbid = dentry->cbid; /* This is underying base if dentry is base selection */ icmSetUnity3x3(p->ccmat); } + p->refrmode = dentry->refr; + + if (p->log->debug >= 4) { + a1logd(p->log,4,"ccmat = %f %f %f\n", + p->ccmat[0][0], p->ccmat[0][1], p->ccmat[0][2]); + a1logd(p->log,4," %f %f %f\n", + p->ccmat[1][0], p->ccmat[1][1], p->ccmat[1][2]); + a1logd(p->log,4," %f %f %f\n\n", + p->ccmat[2][0], p->ccmat[2][1], p->ccmat[2][2]); + a1logd(p->log,4,"ucbid = %d, cbid = %d\n",p->ucbid, p->cbid); + a1logd(p->log,4,"\n"); + } + + return inst_ok; +} + +/* Set the display type */ +static inst_code hcfr_set_disptype(inst *pp, int ix) { + hcfr *p = (hcfr *)pp; + inst_code ev; + inst_disptypesel *dentry; + + if (p->dtlist == NULL) { + if ((ev = inst_creat_disptype_list(pp, &p->ndtlist, &p->dtlist, + hcfr_disptypesel, 0 /* doccss*/, 1 /* doccmx */)) != inst_ok) + return ev; + } + + if (ix < 0 || ix >= p->ndtlist) + return inst_unsupported; + + dentry = &p->dtlist[ix]; + + if ((ev = set_disp_type(p, dentry)) != inst_ok) { + return ev; + } return inst_ok; } @@ -784,30 +851,55 @@ static inst_code set_default_disp_type(hcfr *p) { return inst_ok; } -/* Set the display type */ -static inst_code hcfr_set_disptype(inst *pp, int ix) { - hcfr *p = (hcfr *)pp; +/* Setup the display type to the given base type */ +static inst_code set_base_disp_type(hcfr *p, int cbid) { inst_code ev; - inst_disptypesel *dentry; + int i; + if (cbid == 0) { + a1loge(p->log, 1, "hcfr set_base_disp_type: can't set base display type of 0\n"); + return inst_wrong_setup; + } if (p->dtlist == NULL) { - if ((ev = inst_creat_disptype_list(pp, &p->ndtlist, &p->dtlist, + if ((ev = inst_creat_disptype_list((inst *)p, &p->ndtlist, &p->dtlist, hcfr_disptypesel, 0 /* doccss*/, 1 /* doccmx */)) != inst_ok) return ev; } - if (ix < 0 || ix >= p->ndtlist) - return inst_unsupported; - - dentry = &p->dtlist[ix]; - - if ((ev = set_disp_type(p, dentry)) != inst_ok) { + for (i = 0; !(p->dtlist[i].flags & inst_dtflags_end); i++) { + if (p->dtlist[i].cbid == cbid) + break; + } + if (p->dtlist[i].flags & inst_dtflags_end) { + a1loge(p->log, 1, "set_base_disp_type: failed to find cbid %d!\n",cbid); + return inst_wrong_setup; + } + if ((ev = set_disp_type(p, &p->dtlist[i])) != inst_ok) { return ev; } return inst_ok; } +/* Get the disptech and other corresponding info for the current */ +/* selected display type. Returns disptype_unknown by default. */ +/* Because refrmode can be overridden, it may not match the refrmode */ +/* of the dtech. (Pointers may be NULL if not needed) */ +static inst_code hcfr_get_disptechi( +inst *pp, +disptech *dtech, +int *refrmode, +int *cbid) { + hcfr *p = (hcfr *)pp; + if (dtech != NULL) + *dtech = p->dtech; + if (refrmode != NULL) + *refrmode = p->refrmode; + if (cbid != NULL) + *cbid = p->cbid; + return inst_ok; +} + /* * set or reset an optional mode * @@ -826,24 +918,6 @@ hcfr_get_set_opt(inst *pp, inst_opt_type m, ...) { return inst_ok; } - /* Get the display type information */ - if (m == inst_opt_get_dtinfo) { - va_list args; - int *refrmode, *cbid; - - va_start(args, m); - refrmode = va_arg(args, int *); - cbid = va_arg(args, int *); - va_end(args); - - if (refrmode != NULL) - *refrmode = p->refrmode; - if (cbid != NULL) - *cbid = p->cbid; - - return inst_ok; - } - return inst_unsupported; } @@ -864,6 +938,7 @@ extern hcfr *new_hcfr(icoms *icom, instType itype) { p->set_mode = hcfr_set_mode; p->get_disptypesel = hcfr_get_disptypesel; p->set_disptype = hcfr_set_disptype; + p->get_disptechi = hcfr_get_disptechi; p->get_set_opt = hcfr_get_set_opt; p->read_sample = hcfr_read_sample; p->col_cor_mat = hcfr_col_cor_mat; @@ -874,6 +949,7 @@ extern hcfr *new_hcfr(icoms *icom, instType itype) { p->itype = icom->itype; icmSetUnity3x3(p->ccmat); /* Set the colorimeter correction matrix to do nothing */ + p->dtech = disptech_unknown; return p; } |