diff options
author | Jörg Frings-Fürst <debian@jff-webhosting.net> | 2014-09-01 15:43:52 +0200 |
---|---|---|
committer | Jörg Frings-Fürst <debian@jff-webhosting.net> | 2014-09-01 15:43:52 +0200 |
commit | c07d0c2d2f6f7b0eb6e92cc6204bf05037957e82 (patch) | |
tree | 41791cbe367cf023b98043fee56f9346b2592b49 /spectro/inst.h | |
parent | d7f89e6fe63b8697fab5a901cfce457b375638b3 (diff) |
Imported Upstream version 1.6.3upstream/1.6.3
Diffstat (limited to 'spectro/inst.h')
-rw-r--r-- | spectro/inst.h | 114 |
1 files changed, 65 insertions, 49 deletions
diff --git a/spectro/inst.h b/spectro/inst.h index 5b5d710..d69a37f 100644 --- a/spectro/inst.h +++ b/spectro/inst.h @@ -66,14 +66,15 @@ #define ICOM_MAX_LOC_LEN 10 /* Type of measurement result */ -typedef enum { /* XYZ units, spectral units */ +typedef enum { /* XYZ units, Spectral units */ inst_mrt_none = 0, /* Not set */ - inst_mrt_emission = 1, /* cd/m^2, mW/m^2/nm */ - inst_mrt_ambient = 2, /* Lux/3.1415926 ?? */ - inst_mrt_emission_flash = 3, /* cd/m^2.s, mW/m^2/nm.s*/ - inst_mrt_ambient_flash = 4, /* Lux/3.1415926/s ?? */ + inst_mrt_emission = 1, /* cd/m^2, mW/(m^2.sr.nm) */ + inst_mrt_ambient = 2, /* Lux mW/(m^2.nm) */ + inst_mrt_emission_flash = 3, /* cd/(m^2.s), mW/(m^2.sr.nm.s) */ + inst_mrt_ambient_flash = 4, /* Lux/s mW/(m^2.nm.s) */ inst_mrt_reflective = 5, /* %, %/nm */ - inst_mrt_transmissive = 6 /* %, %/nm */ + inst_mrt_transmissive = 6, /* %, %/nm */ + inst_mrt_frequency = 7 /* Hz */ } inst_meas_type; struct _ipatch { @@ -101,31 +102,31 @@ struct _ipatch { /* Note :- update inst_interp_error() in inst.c if anything here is changed. */ /* and also check all the instrument specific XXX_interp_code() routines too. */ typedef enum { - inst_ok = 0x0000, - inst_notify = 0x0100, /* A Notification */ - inst_warning = 0x0200, /* A Warning */ - inst_no_coms = 0x0300, /* init_coms() hasn't been called yet */ - inst_no_init = 0x0400, /* init_inst() hasn't been called yet */ - inst_unsupported = 0x0500, /* Unsupported function */ - inst_internal_error = 0x0600, /* Internal software error */ - inst_coms_fail = 0x0700, /* Communication failure */ - inst_unknown_model = 0x0800, /* Not the expected instrument */ - inst_protocol_error = 0x0900, /* Read or Write protocol error */ - inst_user_abort = 0x0A00, /* User hit escape */ - inst_user_trig = 0x0C00, /* User hit trigger key */ - inst_misread = 0x0E00, /* Bad reading, or strip misread */ - inst_nonesaved = 0x0F00, /* No saved data to read */ - inst_nochmatch = 0x1000, /* Chart doesn't match */ - inst_needs_cal = 0x1100, /* Instrument needs calibration, and read retried */ - inst_cal_setup = 0x1200, /* Calibration retry with correct setup is needed */ - inst_wrong_config = 0x1300, /* Retry with correct inst. config./sensor posn. needed */ - inst_unexpected_reply = 0x1400, /* Unexpected Reply */ - inst_wrong_setup = 0x1500, /* Setup is wrong or conflicting */ - inst_hardware_fail = 0x1600, /* Hardware failure */ - inst_bad_parameter = 0x1700, /* Bad parameter value */ - inst_other_error = 0x1800, /* Some other error */ - inst_mask = 0xff00, /* inst_code mask value */ - inst_imask = 0x00ff /* instrument specific mask value */ + inst_ok = 0x000000, + inst_notify = 0x010000, /* A Notification */ + inst_warning = 0x020000, /* A Warning */ + inst_no_coms = 0x030000, /* init_coms() hasn't been called yet */ + inst_no_init = 0x040000, /* init_inst() hasn't been called yet */ + inst_unsupported = 0x050000, /* Unsupported function */ + inst_internal_error = 0x060000, /* Internal software error */ + inst_coms_fail = 0x070000, /* Communication failure */ + inst_unknown_model = 0x080000, /* Not the expected instrument */ + inst_protocol_error = 0x090000, /* Read or Write protocol error */ + inst_user_abort = 0x0A0000, /* User hit escape */ + inst_user_trig = 0x0C0000, /* User hit trigger key */ + inst_misread = 0x0E0000, /* Bad reading, or strip misread */ + inst_nonesaved = 0x0F0000, /* No saved data to read */ + inst_nochmatch = 0x100000, /* Chart doesn't match */ + inst_needs_cal = 0x110000, /* Instrument needs calibration, and read retried */ + inst_cal_setup = 0x120000, /* Calibration retry with correct setup is needed */ + inst_wrong_config = 0x130000, /* Retry with correct inst. config./sensor posn. needed */ + inst_unexpected_reply = 0x140000, /* Unexpected Reply */ + inst_wrong_setup = 0x150000, /* Setup is wrong or conflicting */ + inst_hardware_fail = 0x160000, /* Hardware failure */ + inst_bad_parameter = 0x170000, /* Bad parameter value */ + inst_other_error = 0x180000, /* Some other error */ + inst_mask = 0xff0000, /* inst_code mask value */ + inst_imask = 0x00ffff /* instrument specific mask value */ } inst_code; /* Instrument capabilities & modes */ @@ -257,7 +258,11 @@ typedef enum { inst2_xy_position = 0x00000004, /* Can be positioned at a given location */ inst2_meas_disp_update = 0x00000010, /* Is able to measure display update delay */ - inst2_refresh_rate = 0x00000020, /* Is able to retrieve the calibrated refresh rate */ + + inst2_get_refresh_rate = 0x00000020, /* Is able to get the calibrated refresh rate */ + inst2_set_refresh_rate = 0x00000040, /* Is able to set the calibrated refresh rate */ + + inst2_emis_refr_meas = 0x00000080, /* Has an emissive refresh rate measurement func. */ inst2_prog_trig = 0x00000100, /* Progromatic trigger measure capability */ inst2_user_trig = 0x00000200, /* User trigger measure capability */ @@ -270,17 +275,21 @@ typedef enum { inst2_no_feedback = 0x00008000, /* Instrument doesn't give any user feedback */ inst2_has_leds = 0x00200000, /* Instrument has some user viewable indicator LEDs */ - inst2_has_sensmode = 0x00400000, /* Instrument can report it's sensors mode */ + inst2_has_target = 0x00400000, /* Instrument has aiming target */ + inst2_has_sensmode = 0x00800000, /* Instrument can report it's sensors mode */ + + inst2_has_battery = 0x01000000, /* Instrument is battery powered */ - inst2_has_battery = 0x00800000, /* Instrument is battery powered */ + inst2_disptype = 0x02000000, /* Has a display type selector */ + inst2_ccmx = 0x04000000, /* Colorimeter Correction Matrix capability */ + inst2_ccss = 0x08000000, /* Colorimeter Cal. Spectral Set capability */ - inst2_disptype = 0x01000000, /* Has a display type selector */ - inst2_ccmx = 0x02000000, /* Colorimeter Correction Matrix capability */ - inst2_ccss = 0x04000000, /* Colorimeter Cal. Spectral Set capability */ + inst2_ambient_mono = 0x10000000, /* The ambient measurement is monochrome */ - inst2_ambient_mono = 0x08000000, /* The ambient measurement is monochrome */ + inst2_ambient_cardioid = 0x20000000, /* The ambient measurement has a cardioid response */ - inst2_emis_refr_meas = 0x10000000, /* Has an emissive refresh rate measurement func. */ + inst2_get_min_int_time = 0x40000000, /* Is able to get the minimum integration time */ + inst2_set_min_int_time = 0x80000000 /* Is able to set the minimum integration time */ } inst2_capability; @@ -297,7 +306,6 @@ typedef enum { inst_dtflags_ccss = 0x0002, /* ccss */ inst_dtflags_ccmx = 0x0004, /* ccmx */ inst_dtflags_end = 0x8000 /* end marker */ - } inst_dtflags; #define INST_DTYPE_SEL_LEN 10 @@ -310,7 +318,7 @@ typedef struct _inst_disptypesel { inst_dtflags flags; /* Attribute flags */ int cbid; /* Calibration base ID. NZ if valid ccmx calibration base. */ /* Should remain constant between releases */ - char sel[INST_DTYPE_SEL_LEN]; /* String of selector characters */ + char sel[INST_DTYPE_SEL_LEN]; /* String of selector character aliases */ char desc[INST_DTYPE_DESC_LEN]; /* Textural description */ int refr; /* Refresh mode flag */ @@ -353,9 +361,8 @@ typedef enum { inst_opt_initcalib = 0x0008, /* Enable initial calibration (default) [No args] */ inst_opt_noinitcalib = 0x0009, /* Disable initial calibration if < losecs since last */ /* opened, or losecs == 0 [int losecs] */ - inst_opt_set_ccss_obs = 0x000A, /* Set the observer used with ccss device types */ - /* Only takes effect after inst_opt_set_disp_type */ - /* or col_cal_spec_set() */ + inst_opt_set_ccss_obs = 0x000A, /* Set the observer used with ccss device types - */ + /* Not applicable to any other type of instrument. */ /* [args: icxObserverType obType,*/ /* xspect custObserver[3] */ @@ -371,7 +378,7 @@ typedef enum { inst_opt_trig_switch = 0x0010, /* Trigger using instrument switch [No args] */ inst_opt_trig_user_switch = 0x0011, /* Trigger from user via uicallback or switch (def) [No args] */ - inst_opt_highres = 0x0012, /* Enable high resolution spectral mode */ + inst_opt_highres = 0x0012, /* Enable high res spectral mode indep. of set_mode() */ inst_opt_stdres = 0x0013, /* Revert to standard resolution spectral mode */ inst_opt_scan_toll = 0x0014, /* Modify the patch scan recognition tollnce [double] */ @@ -383,7 +390,11 @@ typedef enum { inst_opt_get_pulse_ledmask = 0x0018, /* Get the bitmask for pulseable ind. LEDs [*int] */ inst_opt_set_led_pulse_state= 0x0019, /* Set the current LED state. [double period_in_secs, */ /* double on_time_prop, double trans_time_prop] */ - inst_opt_get_led_pulse_state= 0x001A /* Get the current pulse LED state. [*double period, */ + inst_opt_get_led_pulse_state= 0x001A, /* Get the current pulse LED state. [*double period] */ + inst_opt_set_target_state = 0x001B, /* Set the aiming target state 0 = off, 1 == on, 2 = toggle [int] */ + + inst_opt_get_min_int_time = 0x001C, /* Get the minimum integration time [*double time] */ + inst_opt_set_min_int_time = 0x001D /* Set the minimum integration time [double time] */ } inst_opt_type; @@ -480,9 +491,11 @@ typedef enum { inst_calc_man_man_mask = 0x000000F0, /* user configured calibration mask */ inst_calc_emis_white = 0x00000100, /* Provide a white test patch */ - inst_calc_emis_grey = 0x00000200, /* Provide a grey test patch */ - inst_calc_emis_grey_darker = 0x00000300, /* Provide a darker grey test patch */ - inst_calc_emis_grey_ligher = 0x00000400, /* Provide a darker grey test patch */ + inst_calc_emis_80pc = 0x00000200, /* Provide an 80% white test patch */ + inst_calc_emis_grey = 0x00000300, /* Provide a grey test patch */ + inst_calc_emis_grey_darker = 0x00000400, /* Provide a darker grey test patch */ + inst_calc_emis_grey_ligher = 0x00000500, /* Provide a darker grey test patch */ + inst_calc_emis_mask = 0x00000F00, /* Emmissive/display provided reference patch */ inst_calc_change_filter = 0x00010000, /* Filter needs changing on device - see id[] */ @@ -803,6 +816,7 @@ typedef enum { int *msecdelay); /* Return the number of msec */ \ \ /* Return the last calibrated refresh rate in Hz. Returns: */ \ + /* (Available if cap2 & inst2_get_refresh_rate) */ \ /* inst_unsupported - if this instrument doesn't suport a refresh mode */ \ /* or is unable to retrieve the refresh rate */ \ /* inst_needs_cal - if the refresh rate value is not valid */ \ @@ -813,6 +827,7 @@ typedef enum { double *ref_rate); /* Return the Hz */ \ \ /* Set the calibrated refresh rate in Hz. */ \ + /* (Available if cap2 & inst2_set_refresh_rate) */ \ /* Set refresh rate to 0.0 to mark it as invalid */ \ /* Rates outside the range 5.0 to 150.0 Hz will return an error */ \ /* Note that not all instruments that can return a refresh rate, */ \ @@ -824,6 +839,7 @@ typedef enum { /* Insert a compensation filter in the instrument readings */ \ /* This is typically needed if an adapter is being used, that alters */ \ /* the spectrum of the light reaching the instrument */ \ + /* Not fully implemented across all instrument types (spectrolino only ?) */ \ /* To remove the filter, pass NULL for the filter filename */ \ inst_code (*comp_filter)( \ struct _inst *p, \ |