remove unused sources

1 files changed, 0 insertions, 532 deletions

diff --git a/tiff/libtiff/tif_fax3.h b/tiff/libtiff/tif_fax3.h
deleted file mode 100644
index 40718bc..0000000
--- a/tiff/libtiff/tif_fax3.h
+++ /dev/null
@@ -1,532 +0,0 @@
-/* $Id: tif_fax3.h,v 1.5.2.1 2010-06-08 18:50:42 bfriesen Exp $ */
-
-/*
- * Copyright (c) 1990-1997 Sam Leffler
- * Copyright (c) 1991-1997 Silicon Graphics, Inc.
- *
- * Permission to use, copy, modify, distribute, and sell this software and 
- * its documentation for any purpose is hereby granted without fee, provided
- * that (i) the above copyright notices and this permission notice appear in
- * all copies of the software and related documentation, and (ii) the names of
- * Sam Leffler and Silicon Graphics may not be used in any advertising or
- * publicity relating to the software without the specific, prior written
- * permission of Sam Leffler and Silicon Graphics.
- * 
- * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, 
- * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY 
- * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.  
- * 
- * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR
- * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND,
- * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
- * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF 
- * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE 
- * OF THIS SOFTWARE.
- */
-
-#ifndef _FAX3_
-#define	_FAX3_
-/*
- * TIFF Library.
- *
- * CCITT Group 3 (T.4) and Group 4 (T.6) Decompression Support.
- *
- * Decoder support is derived, with permission, from the code
- * in Frank Cringle's viewfax program;
- *      Copyright (C) 1990, 1995  Frank D. Cringle.
- */
-#include "tiff.h"
-
-/*
- * To override the default routine used to image decoded
- * spans one can use the pseduo tag TIFFTAG_FAXFILLFUNC.
- * The routine must have the type signature given below;
- * for example:
- *
- * fillruns(unsigned char* buf, uint32* runs, uint32* erun, uint32 lastx)
- *
- * where buf is place to set the bits, runs is the array of b&w run
- * lengths (white then black), erun is the last run in the array, and
- * lastx is the width of the row in pixels.  Fill routines can assume
- * the run array has room for at least lastx runs and can overwrite
- * data in the run array as needed (e.g. to append zero runs to bring
- * the count up to a nice multiple).
- */
-typedef	void (*TIFFFaxFillFunc)(unsigned char*, uint32*, uint32*, uint32);
-
-/*
- * The default run filler; made external for other decoders.
- */
-#if defined(__cplusplus)
-extern "C" {
-#endif
-extern	void _TIFFFax3fillruns(unsigned char*, uint32*, uint32*, uint32);
-#if defined(__cplusplus)
-}
-#endif
-
-
-/* finite state machine codes */
-#define S_Null		0
-#define S_Pass		1
-#define S_Horiz		2
-#define S_V0		3
-#define S_VR		4
-#define S_VL		5
-#define S_Ext		6
-#define S_TermW		7
-#define S_TermB		8
-#define S_MakeUpW	9
-#define S_MakeUpB	10
-#define S_MakeUp	11
-#define S_EOL		12
-
-typedef struct {		/* state table entry */
-	unsigned char State;	/* see above */
-	unsigned char Width;	/* width of code in bits */
-	uint32	Param;		/* unsigned 32-bit run length in bits */
-} TIFFFaxTabEnt;
-
-extern	const TIFFFaxTabEnt TIFFFaxMainTable[];
-extern	const TIFFFaxTabEnt TIFFFaxWhiteTable[];
-extern	const TIFFFaxTabEnt TIFFFaxBlackTable[];
-
-/*
- * The following macros define the majority of the G3/G4 decoder
- * algorithm using the state tables defined elsewhere.  To build
- * a decoder you need some setup code and some glue code. Note
- * that you may also need/want to change the way the NeedBits*
- * macros get input data if, for example, you know the data to be
- * decoded is properly aligned and oriented (doing so before running
- * the decoder can be a big performance win).
- *
- * Consult the decoder in the TIFF library for an idea of what you
- * need to define and setup to make use of these definitions.
- *
- * NB: to enable a debugging version of these macros define FAX3_DEBUG
- *     before including this file.  Trace output goes to stdout.
- */
-
-#ifndef EndOfData
-#define EndOfData()	(cp >= ep)
-#endif
-/*
- * Need <=8 or <=16 bits of input data.  Unlike viewfax we
- * cannot use/assume a word-aligned, properly bit swizzled
- * input data set because data may come from an arbitrarily
- * aligned, read-only source such as a memory-mapped file.
- * Note also that the viewfax decoder does not check for
- * running off the end of the input data buffer.  This is
- * possible for G3-encoded data because it prescans the input
- * data to count EOL markers, but can cause problems for G4
- * data.  In any event, we don't prescan and must watch for
- * running out of data since we can't permit the library to
- * scan past the end of the input data buffer.
- *
- * Finally, note that we must handle remaindered data at the end
- * of a strip specially.  The coder asks for a fixed number of
- * bits when scanning for the next code.  This may be more bits
- * than are actually present in the data stream.  If we appear
- * to run out of data but still have some number of valid bits
- * remaining then we makeup the requested amount with zeros and
- * return successfully.  If the returned data is incorrect then
- * we should be called again and get a premature EOF error;
- * otherwise we should get the right answer.
- */
-#ifndef NeedBits8
-#define NeedBits8(n,eoflab) do {					\
-    if (BitsAvail < (n)) {						\
-	if (EndOfData()) {						\
-	    if (BitsAvail == 0)			/* no valid bits */	\
-		goto eoflab;						\
-	    BitsAvail = (n);			/* pad with zeros */	\
-	} else {							\
-	    BitAcc |= ((uint32) bitmap[*cp++])<<BitsAvail;		\
-	    BitsAvail += 8;						\
-	}								\
-    }									\
-} while (0)
-#endif
-#ifndef NeedBits16
-#define NeedBits16(n,eoflab) do {					\
-    if (BitsAvail < (n)) {						\
-	if (EndOfData()) {						\
-	    if (BitsAvail == 0)			/* no valid bits */	\
-		goto eoflab;						\
-	    BitsAvail = (n);			/* pad with zeros */	\
-	} else {							\
-	    BitAcc |= ((uint32) bitmap[*cp++])<<BitsAvail;		\
-	    if ((BitsAvail += 8) < (n)) {				\
-		if (EndOfData()) {					\
-		    /* NB: we know BitsAvail is non-zero here */	\
-		    BitsAvail = (n);		/* pad with zeros */	\
-		} else {						\
-		    BitAcc |= ((uint32) bitmap[*cp++])<<BitsAvail;	\
-		    BitsAvail += 8;					\
-		}							\
-	    }								\
-	}								\
-    }									\
-} while (0)
-#endif
-#define GetBits(n)	(BitAcc & ((1<<(n))-1))
-#define ClrBits(n) do {							\
-    BitsAvail -= (n);							\
-    BitAcc >>= (n);							\
-} while (0)
-
-#ifdef FAX3_DEBUG
-static const char* StateNames[] = {
-    "Null   ",
-    "Pass   ",
-    "Horiz  ",
-    "V0     ",
-    "VR     ",
-    "VL     ",
-    "Ext    ",
-    "TermW  ",
-    "TermB  ",
-    "MakeUpW",
-    "MakeUpB",
-    "MakeUp ",
-    "EOL    ",
-};
-#define DEBUG_SHOW putchar(BitAcc & (1 << t) ? '1' : '0')
-#define LOOKUP8(wid,tab,eoflab) do {					\
-    int t;								\
-    NeedBits8(wid,eoflab);						\
-    TabEnt = tab + GetBits(wid);					\
-    printf("%08lX/%d: %s%5d\t", (long) BitAcc, BitsAvail,		\
-	   StateNames[TabEnt->State], TabEnt->Param);			\
-    for (t = 0; t < TabEnt->Width; t++)					\
-	DEBUG_SHOW;							\
-    putchar('\n');							\
-    fflush(stdout);							\
-    ClrBits(TabEnt->Width);						\
-} while (0)
-#define LOOKUP16(wid,tab,eoflab) do {					\
-    int t;								\
-    NeedBits16(wid,eoflab);						\
-    TabEnt = tab + GetBits(wid);					\
-    printf("%08lX/%d: %s%5d\t", (long) BitAcc, BitsAvail,		\
-	   StateNames[TabEnt->State], TabEnt->Param);			\
-    for (t = 0; t < TabEnt->Width; t++)					\
-	DEBUG_SHOW;							\
-    putchar('\n');							\
-    fflush(stdout);							\
-    ClrBits(TabEnt->Width);						\
-} while (0)
-
-#define SETVALUE(x) do {							\
-    *pa++ = RunLength + (x);						\
-    printf("SETVALUE: %d\t%d\n", RunLength + (x), a0);			\
-    a0 += x;								\
-    RunLength = 0;							\
-} while (0)
-#else
-#define LOOKUP8(wid,tab,eoflab) do {					\
-    NeedBits8(wid,eoflab);						\
-    TabEnt = tab + GetBits(wid);					\
-    ClrBits(TabEnt->Width);						\
-} while (0)
-#define LOOKUP16(wid,tab,eoflab) do {					\
-    NeedBits16(wid,eoflab);						\
-    TabEnt = tab + GetBits(wid);					\
-    ClrBits(TabEnt->Width);						\
-} while (0)
-
-/*
- * Append a run to the run length array for the
- * current row and reset decoding state.
- */
-#define SETVALUE(x) do {							\
-    *pa++ = RunLength + (x);						\
-    a0 += (x);								\
-    RunLength = 0;							\
-} while (0)
-#endif
-
-/*
- * Synchronize input decoding at the start of each
- * row by scanning for an EOL (if appropriate) and
- * skipping any trash data that might be present
- * after a decoding error.  Note that the decoding
- * done elsewhere that recognizes an EOL only consumes
- * 11 consecutive zero bits.  This means that if EOLcnt
- * is non-zero then we still need to scan for the final flag
- * bit that is part of the EOL code.
- */
-#define	SYNC_EOL(eoflab) do {						\
-    if (EOLcnt == 0) {							\
-	for (;;) {							\
-	    NeedBits16(11,eoflab);					\
-	    if (GetBits(11) == 0)					\
-		break;							\
-	    ClrBits(1);							\
-	}								\
-    }									\
-    for (;;) {								\
-	NeedBits8(8,eoflab);						\
-	if (GetBits(8))							\
-	    break;							\
-	ClrBits(8);							\
-    }									\
-    while (GetBits(1) == 0)						\
-	ClrBits(1);							\
-    ClrBits(1);				/* EOL bit */			\
-    EOLcnt = 0;				/* reset EOL counter/flag */	\
-} while (0)
-
-/*
- * Cleanup the array of runs after decoding a row.
- * We adjust final runs to insure the user buffer is not
- * overwritten and/or undecoded area is white filled.
- */
-#define	CLEANUP_RUNS() do {						\
-    if (RunLength)							\
-	SETVALUE(0);							\
-    if (a0 != lastx) {							\
-	badlength(a0, lastx);						\
-	while (a0 > lastx && pa > thisrun)				\
-	    a0 -= *--pa;						\
-	if (a0 < lastx) {						\
-	    if (a0 < 0)							\
-		a0 = 0;							\
-	    if ((pa-thisrun)&1)						\
-		SETVALUE(0);						\
-	    SETVALUE(lastx - a0);						\
-	} else if (a0 > lastx) {					\
-	    SETVALUE(lastx);						\
-	    SETVALUE(0);							\
-	}								\
-    }									\
-} while (0)
-
-/*
- * Decode a line of 1D-encoded data.
- *
- * The line expanders are written as macros so that they can be reused
- * but still have direct access to the local variables of the "calling"
- * function.
- *
- * Note that unlike the original version we have to explicitly test for
- * a0 >= lastx after each black/white run is decoded.  This is because
- * the original code depended on the input data being zero-padded to
- * insure the decoder recognized an EOL before running out of data.
- */
-#define EXPAND1D(eoflab) do {						\
-    for (;;) {								\
-	for (;;) {							\
-	    LOOKUP16(12, TIFFFaxWhiteTable, eof1d);			\
-	    switch (TabEnt->State) {					\
-	    case S_EOL:							\
-		EOLcnt = 1;						\
-		goto done1d;						\
-	    case S_TermW:						\
-		SETVALUE(TabEnt->Param);					\
-		goto doneWhite1d;					\
-	    case S_MakeUpW:						\
-	    case S_MakeUp:						\
-		a0 += TabEnt->Param;					\
-		RunLength += TabEnt->Param;				\
-		break;							\
-	    default:							\
-		unexpected("WhiteTable", a0);				\
-		goto done1d;						\
-	    }								\
-	}								\
-    doneWhite1d:							\
-	if (a0 >= lastx)						\
-	    goto done1d;						\
-	for (;;) {							\
-	    LOOKUP16(13, TIFFFaxBlackTable, eof1d);			\
-	    switch (TabEnt->State) {					\
-	    case S_EOL:							\
-		EOLcnt = 1;						\
-		goto done1d;						\
-	    case S_TermB:						\
-		SETVALUE(TabEnt->Param);					\
-		goto doneBlack1d;					\
-	    case S_MakeUpB:						\
-	    case S_MakeUp:						\
-		a0 += TabEnt->Param;					\
-		RunLength += TabEnt->Param;				\
-		break;							\
-	    default:							\
-		unexpected("BlackTable", a0);				\
-		goto done1d;						\
-	    }								\
-	}								\
-    doneBlack1d:							\
-	if (a0 >= lastx)						\
-	    goto done1d;						\
-        if( *(pa-1) == 0 && *(pa-2) == 0 )				\
-            pa -= 2;                                                    \
-    }									\
-eof1d:									\
-    prematureEOF(a0);							\
-    CLEANUP_RUNS();							\
-    goto eoflab;							\
-done1d:									\
-    CLEANUP_RUNS();							\
-} while (0)
-
-/*
- * Update the value of b1 using the array
- * of runs for the reference line.
- */
-#define CHECK_b1 do {							\
-    if (pa != thisrun) while (b1 <= a0 && b1 < lastx) {			\
-	b1 += pb[0] + pb[1];						\
-	pb += 2;							\
-    }									\
-} while (0)
-
-/*
- * Expand a row of 2D-encoded data.
- */
-#define EXPAND2D(eoflab) do {						\
-    while (a0 < lastx) {						\
-	LOOKUP8(7, TIFFFaxMainTable, eof2d);				\
-	switch (TabEnt->State) {					\
-	case S_Pass:							\
-	    CHECK_b1;							\
-	    b1 += *pb++;						\
-	    RunLength += b1 - a0;					\
-	    a0 = b1;							\
-	    b1 += *pb++;						\
-	    break;							\
-	case S_Horiz:							\
-	    if ((pa-thisrun)&1) {					\
-		for (;;) {	/* black first */			\
-		    LOOKUP16(13, TIFFFaxBlackTable, eof2d);		\
-		    switch (TabEnt->State) {				\
-		    case S_TermB:					\
-			SETVALUE(TabEnt->Param);				\
-			goto doneWhite2da;				\
-		    case S_MakeUpB:					\
-		    case S_MakeUp:					\
-			a0 += TabEnt->Param;				\
-			RunLength += TabEnt->Param;			\
-			break;						\
-		    default:						\
-			goto badBlack2d;				\
-		    }							\
-		}							\
-	    doneWhite2da:;						\
-		for (;;) {	/* then white */			\
-		    LOOKUP16(12, TIFFFaxWhiteTable, eof2d);		\
-		    switch (TabEnt->State) {				\
-		    case S_TermW:					\
-			SETVALUE(TabEnt->Param);				\
-			goto doneBlack2da;				\
-		    case S_MakeUpW:					\
-		    case S_MakeUp:					\
-			a0 += TabEnt->Param;				\
-			RunLength += TabEnt->Param;			\
-			break;						\
-		    default:						\
-			goto badWhite2d;				\
-		    }							\
-		}							\
-	    doneBlack2da:;						\
-	    } else {							\
-		for (;;) {	/* white first */			\
-		    LOOKUP16(12, TIFFFaxWhiteTable, eof2d);		\
-		    switch (TabEnt->State) {				\
-		    case S_TermW:					\
-			SETVALUE(TabEnt->Param);				\
-			goto doneWhite2db;				\
-		    case S_MakeUpW:					\
-		    case S_MakeUp:					\
-			a0 += TabEnt->Param;				\
-			RunLength += TabEnt->Param;			\
-			break;						\
-		    default:						\
-			goto badWhite2d;				\
-		    }							\
-		}							\
-	    doneWhite2db:;						\
-		for (;;) {	/* then black */			\
-		    LOOKUP16(13, TIFFFaxBlackTable, eof2d);		\
-		    switch (TabEnt->State) {				\
-		    case S_TermB:					\
-			SETVALUE(TabEnt->Param);				\
-			goto doneBlack2db;				\
-		    case S_MakeUpB:					\
-		    case S_MakeUp:					\
-			a0 += TabEnt->Param;				\
-			RunLength += TabEnt->Param;			\
-			break;						\
-		    default:						\
-			goto badBlack2d;				\
-		    }							\
-		}							\
-	    doneBlack2db:;						\
-	    }								\
-	    CHECK_b1;							\
-	    break;							\
-	case S_V0:							\
-	    CHECK_b1;							\
-	    SETVALUE(b1 - a0);						\
-	    b1 += *pb++;						\
-	    break;							\
-	case S_VR:							\
-	    CHECK_b1;							\
-	    SETVALUE(b1 - a0 + TabEnt->Param);				\
-	    b1 += *pb++;						\
-	    break;							\
-	case S_VL:							\
-	    CHECK_b1;							\
-	    SETVALUE(b1 - a0 - TabEnt->Param);				\
-	    b1 -= *--pb;						\
-	    break;							\
-	case S_Ext:							\
-	    *pa++ = lastx - a0;						\
-	    extension(a0);						\
-	    goto eol2d;							\
-	case S_EOL:							\
-	    *pa++ = lastx - a0;						\
-	    NeedBits8(4,eof2d);						\
-	    if (GetBits(4))						\
-		unexpected("EOL", a0);					\
-            ClrBits(4);                                                 \
-	    EOLcnt = 1;							\
-	    goto eol2d;							\
-	default:							\
-	badMain2d:							\
-	    unexpected("MainTable", a0);				\
-	    goto eol2d;							\
-	badBlack2d:							\
-	    unexpected("BlackTable", a0);				\
-	    goto eol2d;							\
-	badWhite2d:							\
-	    unexpected("WhiteTable", a0);				\
-	    goto eol2d;							\
-	eof2d:								\
-	    prematureEOF(a0);						\
-	    CLEANUP_RUNS();						\
-	    goto eoflab;						\
-	}								\
-    }									\
-    if (RunLength) {							\
-	if (RunLength + a0 < lastx) {					\
-	    /* expect a final V0 */					\
-	    NeedBits8(1,eof2d);						\
-	    if (!GetBits(1))						\
-		goto badMain2d;						\
-	    ClrBits(1);							\
-	}								\
-	SETVALUE(0);							\
-    }									\
-eol2d:									\
-    CLEANUP_RUNS();							\
-} while (0)
-#endif /* _FAX3_ */
-/*
- * Local Variables:
- * mode: c
- * c-basic-offset: 8
- * fill-column: 78
- * End:
- */