Initial import of argyll version 1.5.1-8debian/1.5.1-8

1 files changed, 532 insertions, 0 deletions

diff --git a/tiff/libtiff/tif_fax3.h b/tiff/libtiff/tif_fax3.h
new file mode 100644
index 0000000..40718bc
--- /dev/null
+++ b/tiff/libtiff/tif_fax3.h
@@ -0,0 +1,532 @@
+/* $Id: tif_fax3.h,v 1.5.2.1 2010-06-08 18:50:42 bfriesen Exp $ */
+
+/*
+ * Copyright (c) 1990-1997 Sam Leffler
+ * Copyright (c) 1991-1997 Silicon Graphics, Inc.
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and 
+ * its documentation for any purpose is hereby granted without fee, provided
+ * that (i) the above copyright notices and this permission notice appear in
+ * all copies of the software and related documentation, and (ii) the names of
+ * Sam Leffler and Silicon Graphics may not be used in any advertising or
+ * publicity relating to the software without the specific, prior written
+ * permission of Sam Leffler and Silicon Graphics.
+ * 
+ * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, 
+ * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY 
+ * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.  
+ * 
+ * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR
+ * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND,
+ * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
+ * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF 
+ * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE 
+ * OF THIS SOFTWARE.
+ */
+
+#ifndef _FAX3_
+#define	_FAX3_
+/*
+ * TIFF Library.
+ *
+ * CCITT Group 3 (T.4) and Group 4 (T.6) Decompression Support.
+ *
+ * Decoder support is derived, with permission, from the code
+ * in Frank Cringle's viewfax program;
+ *      Copyright (C) 1990, 1995  Frank D. Cringle.
+ */
+#include "tiff.h"
+
+/*
+ * To override the default routine used to image decoded
+ * spans one can use the pseduo tag TIFFTAG_FAXFILLFUNC.
+ * The routine must have the type signature given below;
+ * for example:
+ *
+ * fillruns(unsigned char* buf, uint32* runs, uint32* erun, uint32 lastx)
+ *
+ * where buf is place to set the bits, runs is the array of b&w run
+ * lengths (white then black), erun is the last run in the array, and
+ * lastx is the width of the row in pixels.  Fill routines can assume
+ * the run array has room for at least lastx runs and can overwrite
+ * data in the run array as needed (e.g. to append zero runs to bring
+ * the count up to a nice multiple).
+ */
+typedef	void (*TIFFFaxFillFunc)(unsigned char*, uint32*, uint32*, uint32);
+
+/*
+ * The default run filler; made external for other decoders.
+ */
+#if defined(__cplusplus)
+extern "C" {
+#endif
+extern	void _TIFFFax3fillruns(unsigned char*, uint32*, uint32*, uint32);
+#if defined(__cplusplus)
+}
+#endif
+
+
+/* finite state machine codes */
+#define S_Null		0
+#define S_Pass		1
+#define S_Horiz		2
+#define S_V0		3
+#define S_VR		4
+#define S_VL		5
+#define S_Ext		6
+#define S_TermW		7
+#define S_TermB		8
+#define S_MakeUpW	9
+#define S_MakeUpB	10
+#define S_MakeUp	11
+#define S_EOL		12
+
+typedef struct {		/* state table entry */
+	unsigned char State;	/* see above */
+	unsigned char Width;	/* width of code in bits */
+	uint32	Param;		/* unsigned 32-bit run length in bits */
+} TIFFFaxTabEnt;
+
+extern	const TIFFFaxTabEnt TIFFFaxMainTable[];
+extern	const TIFFFaxTabEnt TIFFFaxWhiteTable[];
+extern	const TIFFFaxTabEnt TIFFFaxBlackTable[];
+
+/*
+ * The following macros define the majority of the G3/G4 decoder
+ * algorithm using the state tables defined elsewhere.  To build
+ * a decoder you need some setup code and some glue code. Note
+ * that you may also need/want to change the way the NeedBits*
+ * macros get input data if, for example, you know the data to be
+ * decoded is properly aligned and oriented (doing so before running
+ * the decoder can be a big performance win).
+ *
+ * Consult the decoder in the TIFF library for an idea of what you
+ * need to define and setup to make use of these definitions.
+ *
+ * NB: to enable a debugging version of these macros define FAX3_DEBUG
+ *     before including this file.  Trace output goes to stdout.
+ */
+
+#ifndef EndOfData
+#define EndOfData()	(cp >= ep)
+#endif
+/*
+ * Need <=8 or <=16 bits of input data.  Unlike viewfax we
+ * cannot use/assume a word-aligned, properly bit swizzled
+ * input data set because data may come from an arbitrarily
+ * aligned, read-only source such as a memory-mapped file.
+ * Note also that the viewfax decoder does not check for
+ * running off the end of the input data buffer.  This is
+ * possible for G3-encoded data because it prescans the input
+ * data to count EOL markers, but can cause problems for G4
+ * data.  In any event, we don't prescan and must watch for
+ * running out of data since we can't permit the library to
+ * scan past the end of the input data buffer.
+ *
+ * Finally, note that we must handle remaindered data at the end
+ * of a strip specially.  The coder asks for a fixed number of
+ * bits when scanning for the next code.  This may be more bits
+ * than are actually present in the data stream.  If we appear
+ * to run out of data but still have some number of valid bits
+ * remaining then we makeup the requested amount with zeros and
+ * return successfully.  If the returned data is incorrect then
+ * we should be called again and get a premature EOF error;
+ * otherwise we should get the right answer.
+ */
+#ifndef NeedBits8
+#define NeedBits8(n,eoflab) do {					\
+    if (BitsAvail < (n)) {						\
+	if (EndOfData()) {						\
+	    if (BitsAvail == 0)			/* no valid bits */	\
+		goto eoflab;						\
+	    BitsAvail = (n);			/* pad with zeros */	\
+	} else {							\
+	    BitAcc |= ((uint32) bitmap[*cp++])<<BitsAvail;		\
+	    BitsAvail += 8;						\
+	}								\
+    }									\
+} while (0)
+#endif
+#ifndef NeedBits16
+#define NeedBits16(n,eoflab) do {					\
+    if (BitsAvail < (n)) {						\
+	if (EndOfData()) {						\
+	    if (BitsAvail == 0)			/* no valid bits */	\
+		goto eoflab;						\
+	    BitsAvail = (n);			/* pad with zeros */	\
+	} else {							\
+	    BitAcc |= ((uint32) bitmap[*cp++])<<BitsAvail;		\
+	    if ((BitsAvail += 8) < (n)) {				\
+		if (EndOfData()) {					\
+		    /* NB: we know BitsAvail is non-zero here */	\
+		    BitsAvail = (n);		/* pad with zeros */	\
+		} else {						\
+		    BitAcc |= ((uint32) bitmap[*cp++])<<BitsAvail;	\
+		    BitsAvail += 8;					\
+		}							\
+	    }								\
+	}								\
+    }									\
+} while (0)
+#endif
+#define GetBits(n)	(BitAcc & ((1<<(n))-1))
+#define ClrBits(n) do {							\
+    BitsAvail -= (n);							\
+    BitAcc >>= (n);							\
+} while (0)
+
+#ifdef FAX3_DEBUG
+static const char* StateNames[] = {
+    "Null   ",
+    "Pass   ",
+    "Horiz  ",
+    "V0     ",
+    "VR     ",
+    "VL     ",
+    "Ext    ",
+    "TermW  ",
+    "TermB  ",
+    "MakeUpW",
+    "MakeUpB",
+    "MakeUp ",
+    "EOL    ",
+};
+#define DEBUG_SHOW putchar(BitAcc & (1 << t) ? '1' : '0')
+#define LOOKUP8(wid,tab,eoflab) do {					\
+    int t;								\
+    NeedBits8(wid,eoflab);						\
+    TabEnt = tab + GetBits(wid);					\
+    printf("%08lX/%d: %s%5d\t", (long) BitAcc, BitsAvail,		\
+	   StateNames[TabEnt->State], TabEnt->Param);			\
+    for (t = 0; t < TabEnt->Width; t++)					\
+	DEBUG_SHOW;							\
+    putchar('\n');							\
+    fflush(stdout);							\
+    ClrBits(TabEnt->Width);						\
+} while (0)
+#define LOOKUP16(wid,tab,eoflab) do {					\
+    int t;								\
+    NeedBits16(wid,eoflab);						\
+    TabEnt = tab + GetBits(wid);					\
+    printf("%08lX/%d: %s%5d\t", (long) BitAcc, BitsAvail,		\
+	   StateNames[TabEnt->State], TabEnt->Param);			\
+    for (t = 0; t < TabEnt->Width; t++)					\
+	DEBUG_SHOW;							\
+    putchar('\n');							\
+    fflush(stdout);							\
+    ClrBits(TabEnt->Width);						\
+} while (0)
+
+#define SETVALUE(x) do {							\
+    *pa++ = RunLength + (x);						\
+    printf("SETVALUE: %d\t%d\n", RunLength + (x), a0);			\
+    a0 += x;								\
+    RunLength = 0;							\
+} while (0)
+#else
+#define LOOKUP8(wid,tab,eoflab) do {					\
+    NeedBits8(wid,eoflab);						\
+    TabEnt = tab + GetBits(wid);					\
+    ClrBits(TabEnt->Width);						\
+} while (0)
+#define LOOKUP16(wid,tab,eoflab) do {					\
+    NeedBits16(wid,eoflab);						\
+    TabEnt = tab + GetBits(wid);					\
+    ClrBits(TabEnt->Width);						\
+} while (0)
+
+/*
+ * Append a run to the run length array for the
+ * current row and reset decoding state.
+ */
+#define SETVALUE(x) do {							\
+    *pa++ = RunLength + (x);						\
+    a0 += (x);								\
+    RunLength = 0;							\
+} while (0)
+#endif
+
+/*
+ * Synchronize input decoding at the start of each
+ * row by scanning for an EOL (if appropriate) and
+ * skipping any trash data that might be present
+ * after a decoding error.  Note that the decoding
+ * done elsewhere that recognizes an EOL only consumes
+ * 11 consecutive zero bits.  This means that if EOLcnt
+ * is non-zero then we still need to scan for the final flag
+ * bit that is part of the EOL code.
+ */
+#define	SYNC_EOL(eoflab) do {						\
+    if (EOLcnt == 0) {							\
+	for (;;) {							\
+	    NeedBits16(11,eoflab);					\
+	    if (GetBits(11) == 0)					\
+		break;							\
+	    ClrBits(1);							\
+	}								\
+    }									\
+    for (;;) {								\
+	NeedBits8(8,eoflab);						\
+	if (GetBits(8))							\
+	    break;							\
+	ClrBits(8);							\
+    }									\
+    while (GetBits(1) == 0)						\
+	ClrBits(1);							\
+    ClrBits(1);				/* EOL bit */			\
+    EOLcnt = 0;				/* reset EOL counter/flag */	\
+} while (0)
+
+/*
+ * Cleanup the array of runs after decoding a row.
+ * We adjust final runs to insure the user buffer is not
+ * overwritten and/or undecoded area is white filled.
+ */
+#define	CLEANUP_RUNS() do {						\
+    if (RunLength)							\
+	SETVALUE(0);							\
+    if (a0 != lastx) {							\
+	badlength(a0, lastx);						\
+	while (a0 > lastx && pa > thisrun)				\
+	    a0 -= *--pa;						\
+	if (a0 < lastx) {						\
+	    if (a0 < 0)							\
+		a0 = 0;							\
+	    if ((pa-thisrun)&1)						\
+		SETVALUE(0);						\
+	    SETVALUE(lastx - a0);						\
+	} else if (a0 > lastx) {					\
+	    SETVALUE(lastx);						\
+	    SETVALUE(0);							\
+	}								\
+    }									\
+} while (0)
+
+/*
+ * Decode a line of 1D-encoded data.
+ *
+ * The line expanders are written as macros so that they can be reused
+ * but still have direct access to the local variables of the "calling"
+ * function.
+ *
+ * Note that unlike the original version we have to explicitly test for
+ * a0 >= lastx after each black/white run is decoded.  This is because
+ * the original code depended on the input data being zero-padded to
+ * insure the decoder recognized an EOL before running out of data.
+ */
+#define EXPAND1D(eoflab) do {						\
+    for (;;) {								\
+	for (;;) {							\
+	    LOOKUP16(12, TIFFFaxWhiteTable, eof1d);			\
+	    switch (TabEnt->State) {					\
+	    case S_EOL:							\
+		EOLcnt = 1;						\
+		goto done1d;						\
+	    case S_TermW:						\
+		SETVALUE(TabEnt->Param);					\
+		goto doneWhite1d;					\
+	    case S_MakeUpW:						\
+	    case S_MakeUp:						\
+		a0 += TabEnt->Param;					\
+		RunLength += TabEnt->Param;				\
+		break;							\
+	    default:							\
+		unexpected("WhiteTable", a0);				\
+		goto done1d;						\
+	    }								\
+	}								\
+    doneWhite1d:							\
+	if (a0 >= lastx)						\
+	    goto done1d;						\
+	for (;;) {							\
+	    LOOKUP16(13, TIFFFaxBlackTable, eof1d);			\
+	    switch (TabEnt->State) {					\
+	    case S_EOL:							\
+		EOLcnt = 1;						\
+		goto done1d;						\
+	    case S_TermB:						\
+		SETVALUE(TabEnt->Param);					\
+		goto doneBlack1d;					\
+	    case S_MakeUpB:						\
+	    case S_MakeUp:						\
+		a0 += TabEnt->Param;					\
+		RunLength += TabEnt->Param;				\
+		break;							\
+	    default:							\
+		unexpected("BlackTable", a0);				\
+		goto done1d;						\
+	    }								\
+	}								\
+    doneBlack1d:							\
+	if (a0 >= lastx)						\
+	    goto done1d;						\
+        if( *(pa-1) == 0 && *(pa-2) == 0 )				\
+            pa -= 2;                                                    \
+    }									\
+eof1d:									\
+    prematureEOF(a0);							\
+    CLEANUP_RUNS();							\
+    goto eoflab;							\
+done1d:									\
+    CLEANUP_RUNS();							\
+} while (0)
+
+/*
+ * Update the value of b1 using the array
+ * of runs for the reference line.
+ */
+#define CHECK_b1 do {							\
+    if (pa != thisrun) while (b1 <= a0 && b1 < lastx) {			\
+	b1 += pb[0] + pb[1];						\
+	pb += 2;							\
+    }									\
+} while (0)
+
+/*
+ * Expand a row of 2D-encoded data.
+ */
+#define EXPAND2D(eoflab) do {						\
+    while (a0 < lastx) {						\
+	LOOKUP8(7, TIFFFaxMainTable, eof2d);				\
+	switch (TabEnt->State) {					\
+	case S_Pass:							\
+	    CHECK_b1;							\
+	    b1 += *pb++;						\
+	    RunLength += b1 - a0;					\
+	    a0 = b1;							\
+	    b1 += *pb++;						\
+	    break;							\
+	case S_Horiz:							\
+	    if ((pa-thisrun)&1) {					\
+		for (;;) {	/* black first */			\
+		    LOOKUP16(13, TIFFFaxBlackTable, eof2d);		\
+		    switch (TabEnt->State) {				\
+		    case S_TermB:					\
+			SETVALUE(TabEnt->Param);				\
+			goto doneWhite2da;				\
+		    case S_MakeUpB:					\
+		    case S_MakeUp:					\
+			a0 += TabEnt->Param;				\
+			RunLength += TabEnt->Param;			\
+			break;						\
+		    default:						\
+			goto badBlack2d;				\
+		    }							\
+		}							\
+	    doneWhite2da:;						\
+		for (;;) {	/* then white */			\
+		    LOOKUP16(12, TIFFFaxWhiteTable, eof2d);		\
+		    switch (TabEnt->State) {				\
+		    case S_TermW:					\
+			SETVALUE(TabEnt->Param);				\
+			goto doneBlack2da;				\
+		    case S_MakeUpW:					\
+		    case S_MakeUp:					\
+			a0 += TabEnt->Param;				\
+			RunLength += TabEnt->Param;			\
+			break;						\
+		    default:						\
+			goto badWhite2d;				\
+		    }							\
+		}							\
+	    doneBlack2da:;						\
+	    } else {							\
+		for (;;) {	/* white first */			\
+		    LOOKUP16(12, TIFFFaxWhiteTable, eof2d);		\
+		    switch (TabEnt->State) {				\
+		    case S_TermW:					\
+			SETVALUE(TabEnt->Param);				\
+			goto doneWhite2db;				\
+		    case S_MakeUpW:					\
+		    case S_MakeUp:					\
+			a0 += TabEnt->Param;				\
+			RunLength += TabEnt->Param;			\
+			break;						\
+		    default:						\
+			goto badWhite2d;				\
+		    }							\
+		}							\
+	    doneWhite2db:;						\
+		for (;;) {	/* then black */			\
+		    LOOKUP16(13, TIFFFaxBlackTable, eof2d);		\
+		    switch (TabEnt->State) {				\
+		    case S_TermB:					\
+			SETVALUE(TabEnt->Param);				\
+			goto doneBlack2db;				\
+		    case S_MakeUpB:					\
+		    case S_MakeUp:					\
+			a0 += TabEnt->Param;				\
+			RunLength += TabEnt->Param;			\
+			break;						\
+		    default:						\
+			goto badBlack2d;				\
+		    }							\
+		}							\
+	    doneBlack2db:;						\
+	    }								\
+	    CHECK_b1;							\
+	    break;							\
+	case S_V0:							\
+	    CHECK_b1;							\
+	    SETVALUE(b1 - a0);						\
+	    b1 += *pb++;						\
+	    break;							\
+	case S_VR:							\
+	    CHECK_b1;							\
+	    SETVALUE(b1 - a0 + TabEnt->Param);				\
+	    b1 += *pb++;						\
+	    break;							\
+	case S_VL:							\
+	    CHECK_b1;							\
+	    SETVALUE(b1 - a0 - TabEnt->Param);				\
+	    b1 -= *--pb;						\
+	    break;							\
+	case S_Ext:							\
+	    *pa++ = lastx - a0;						\
+	    extension(a0);						\
+	    goto eol2d;							\
+	case S_EOL:							\
+	    *pa++ = lastx - a0;						\
+	    NeedBits8(4,eof2d);						\
+	    if (GetBits(4))						\
+		unexpected("EOL", a0);					\
+            ClrBits(4);                                                 \
+	    EOLcnt = 1;							\
+	    goto eol2d;							\
+	default:							\
+	badMain2d:							\
+	    unexpected("MainTable", a0);				\
+	    goto eol2d;							\
+	badBlack2d:							\
+	    unexpected("BlackTable", a0);				\
+	    goto eol2d;							\
+	badWhite2d:							\
+	    unexpected("WhiteTable", a0);				\
+	    goto eol2d;							\
+	eof2d:								\
+	    prematureEOF(a0);						\
+	    CLEANUP_RUNS();						\
+	    goto eoflab;						\
+	}								\
+    }									\
+    if (RunLength) {							\
+	if (RunLength + a0 < lastx) {					\
+	    /* expect a final V0 */					\
+	    NeedBits8(1,eof2d);						\
+	    if (!GetBits(1))						\
+		goto badMain2d;						\
+	    ClrBits(1);							\
+	}								\
+	SETVALUE(0);							\
+    }									\
+eol2d:									\
+    CLEANUP_RUNS();							\
+} while (0)
+#endif /* _FAX3_ */
+/*
+ * Local Variables:
+ * mode: c
+ * c-basic-offset: 8
+ * fill-column: 78
+ * End:
+ */