remove unused sources

1 files changed, 0 insertions, 537 deletions

diff --git a/zlib/gzlib.c b/zlib/gzlib.c
deleted file mode 100644
index 603e60e..0000000
--- a/zlib/gzlib.c
+++ /dev/null
@@ -1,537 +0,0 @@
-/* gzlib.c -- zlib functions common to reading and writing gzip files
- * Copyright (C) 2004, 2010 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-#include "gzguts.h"
-
-#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0
-#  define LSEEK lseek64
-#else
-#  define LSEEK lseek
-#endif
-
-/* Local functions */
-local void gz_reset OF((gz_statep));
-local gzFile gz_open OF((const char *, int, const char *));
-
-#if defined UNDER_CE
-
-/* Map the Windows error number in ERROR to a locale-dependent error message
-   string and return a pointer to it.  Typically, the values for ERROR come
-   from GetLastError.
-
-   The string pointed to shall not be modified by the application, but may be
-   overwritten by a subsequent call to gz_strwinerror
-
-   The gz_strwinerror function does not change the current setting of
-   GetLastError. */
-char ZLIB_INTERNAL *gz_strwinerror (error)
-     DWORD error;
-{
-    static char buf[1024];
-
-    wchar_t *msgbuf;
-    DWORD lasterr = GetLastError();
-    DWORD chars = FormatMessage(FORMAT_MESSAGE_FROM_SYSTEM
-        | FORMAT_MESSAGE_ALLOCATE_BUFFER,
-        NULL,
-        error,
-        0, /* Default language */
-        (LPVOID)&msgbuf,
-        0,
-        NULL);
-    if (chars != 0) {
-        /* If there is an \r\n appended, zap it.  */
-        if (chars >= 2
-            && msgbuf[chars - 2] == '\r' && msgbuf[chars - 1] == '\n') {
-            chars -= 2;
-            msgbuf[chars] = 0;
-        }
-
-        if (chars > sizeof (buf) - 1) {
-            chars = sizeof (buf) - 1;
-            msgbuf[chars] = 0;
-        }
-
-        wcstombs(buf, msgbuf, chars + 1);
-        LocalFree(msgbuf);
-    }
-    else {
-        sprintf(buf, "unknown win32 error (%ld)", error);
-    }
-
-    SetLastError(lasterr);
-    return buf;
-}
-
-#endif /* UNDER_CE */
-
-/* Reset gzip file state */
-local void gz_reset(state)
-    gz_statep state;
-{
-    if (state->mode == GZ_READ) {   /* for reading ... */
-        state->have = 0;            /* no output data available */
-        state->eof = 0;             /* not at end of file */
-        state->how = LOOK;          /* look for gzip header */
-        state->direct = 1;          /* default for empty file */
-    }
-    state->seek = 0;                /* no seek request pending */
-    gz_error(state, Z_OK, NULL);    /* clear error */
-    state->pos = 0;                 /* no uncompressed data yet */
-    state->strm.avail_in = 0;       /* no input data yet */
-}
-
-/* Open a gzip file either by name or file descriptor. */
-local gzFile gz_open(path, fd, mode)
-    const char *path;
-    int fd;
-    const char *mode;
-{
-    gz_statep state;
-
-    /* allocate gzFile structure to return */
-    state = malloc(sizeof(gz_state));
-    if (state == NULL)
-        return NULL;
-    state->size = 0;            /* no buffers allocated yet */
-    state->want = GZBUFSIZE;    /* requested buffer size */
-    state->msg = NULL;          /* no error message yet */
-
-    /* interpret mode */
-    state->mode = GZ_NONE;
-    state->level = Z_DEFAULT_COMPRESSION;
-    state->strategy = Z_DEFAULT_STRATEGY;
-    while (*mode) {
-        if (*mode >= '0' && *mode <= '9')
-            state->level = *mode - '0';
-        else
-            switch (*mode) {
-            case 'r':
-                state->mode = GZ_READ;
-                break;
-#ifndef NO_GZCOMPRESS
-            case 'w':
-                state->mode = GZ_WRITE;
-                break;
-            case 'a':
-                state->mode = GZ_APPEND;
-                break;
-#endif
-            case '+':       /* can't read and write at the same time */
-                free(state);
-                return NULL;
-            case 'b':       /* ignore -- will request binary anyway */
-                break;
-            case 'f':
-                state->strategy = Z_FILTERED;
-                break;
-            case 'h':
-                state->strategy = Z_HUFFMAN_ONLY;
-                break;
-            case 'R':
-                state->strategy = Z_RLE;
-                break;
-            case 'F':
-                state->strategy = Z_FIXED;
-            default:        /* could consider as an error, but just ignore */
-                ;
-            }
-        mode++;
-    }
-
-    /* must provide an "r", "w", or "a" */
-    if (state->mode == GZ_NONE) {
-        free(state);
-        return NULL;
-    }
-
-    /* save the path name for error messages */
-    state->path = malloc(strlen(path) + 1);
-    if (state->path == NULL) {
-        free(state);
-        return NULL;
-    }
-    strcpy(state->path, path);
-
-    /* open the file with the appropriate mode (or just use fd) */
-    state->fd = fd != -1 ? fd :
-        open(path,
-#ifdef O_LARGEFILE
-            O_LARGEFILE |
-#endif
-#ifdef O_BINARY
-            O_BINARY |
-#endif
-            (state->mode == GZ_READ ?
-                O_RDONLY :
-                (O_WRONLY | O_CREAT | (
-                    state->mode == GZ_WRITE ?
-                        O_TRUNC :
-                        O_APPEND))),
-            0666);
-    if (state->fd == -1) {
-        free(state->path);
-        free(state);
-        return NULL;
-    }
-    if (state->mode == GZ_APPEND)
-        state->mode = GZ_WRITE;         /* simplify later checks */
-
-    /* save the current position for rewinding (only if reading) */
-    if (state->mode == GZ_READ) {
-        state->start = LSEEK(state->fd, 0, SEEK_CUR);
-        if (state->start == -1) state->start = 0;
-    }
-
-    /* initialize stream */
-    gz_reset(state);
-
-    /* return stream */
-    return (gzFile)state;
-}
-
-/* -- see zlib.h -- */
-gzFile ZEXPORT gzopen(path, mode)
-    const char *path;
-    const char *mode;
-{
-    return gz_open(path, -1, mode);
-}
-
-/* -- see zlib.h -- */
-gzFile ZEXPORT gzopen64(path, mode)
-    const char *path;
-    const char *mode;
-{
-    return gz_open(path, -1, mode);
-}
-
-/* -- see zlib.h -- */
-gzFile ZEXPORT gzdopen(fd, mode)
-    int fd;
-    const char *mode;
-{
-    char *path;         /* identifier for error messages */
-    gzFile gz;
-
-    if (fd == -1 || (path = malloc(7 + 3 * sizeof(int))) == NULL)
-        return NULL;
-    sprintf(path, "<fd:%d>", fd);   /* for debugging */
-    gz = gz_open(path, fd, mode);
-    free(path);
-    return gz;
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzbuffer(file, size)
-    gzFile file;
-    unsigned size;
-{
-    gz_statep state;
-
-    /* get internal structure and check integrity */
-    if (file == NULL)
-        return -1;
-    state = (gz_statep)file;
-    if (state->mode != GZ_READ && state->mode != GZ_WRITE)
-        return -1;
-
-    /* make sure we haven't already allocated memory */
-    if (state->size != 0)
-        return -1;
-
-    /* check and set requested size */
-    if (size == 0)
-        return -1;
-    state->want = size;
-    return 0;
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzrewind(file)
-    gzFile file;
-{
-    gz_statep state;
-
-    /* get internal structure */
-    if (file == NULL)
-        return -1;
-    state = (gz_statep)file;
-
-    /* check that we're reading and that there's no error */
-    if (state->mode != GZ_READ || state->err != Z_OK)
-        return -1;
-
-    /* back up and start over */
-    if (LSEEK(state->fd, state->start, SEEK_SET) == -1)
-        return -1;
-    gz_reset(state);
-    return 0;
-}
-
-/* -- see zlib.h -- */
-z_off64_t ZEXPORT gzseek64(file, offset, whence)
-    gzFile file;
-    z_off64_t offset;
-    int whence;
-{
-    unsigned n;
-    z_off64_t ret;
-    gz_statep state;
-
-    /* get internal structure and check integrity */
-    if (file == NULL)
-        return -1;
-    state = (gz_statep)file;
-    if (state->mode != GZ_READ && state->mode != GZ_WRITE)
-        return -1;
-
-    /* check that there's no error */
-    if (state->err != Z_OK)
-        return -1;
-
-    /* can only seek from start or relative to current position */
-    if (whence != SEEK_SET && whence != SEEK_CUR)
-        return -1;
-
-    /* normalize offset to a SEEK_CUR specification */
-    if (whence == SEEK_SET)
-        offset -= state->pos;
-    else if (state->seek)
-        offset += state->skip;
-    state->seek = 0;
-
-    /* if within raw area while reading, just go there */
-    if (state->mode == GZ_READ && state->how == COPY &&
-        state->pos + offset >= state->raw) {
-        ret = LSEEK(state->fd, offset - state->have, SEEK_CUR);
-        if (ret == -1)
-            return -1;
-        state->have = 0;
-        state->eof = 0;
-        state->seek = 0;
-        gz_error(state, Z_OK, NULL);
-        state->strm.avail_in = 0;
-        state->pos += offset;
-        return state->pos;
-    }
-
-    /* calculate skip amount, rewinding if needed for back seek when reading */
-    if (offset < 0) {
-        if (state->mode != GZ_READ)         /* writing -- can't go backwards */
-            return -1;
-        offset += state->pos;
-        if (offset < 0)                     /* before start of file! */
-            return -1;
-        if (gzrewind(file) == -1)           /* rewind, then skip to offset */
-            return -1;
-    }
-
-    /* if reading, skip what's in output buffer (one less gzgetc() check) */
-    if (state->mode == GZ_READ) {
-        n = GT_OFF(state->have) || (z_off64_t)state->have > offset ?
-            (unsigned)offset : state->have;
-        state->have -= n;
-        state->next += n;
-        state->pos += n;
-        offset -= n;
-    }
-
-    /* request skip (if not zero) */
-    if (offset) {
-        state->seek = 1;
-        state->skip = offset;
-    }
-    return state->pos + offset;
-}
-
-/* -- see zlib.h -- */
-z_off_t ZEXPORT gzseek(file, offset, whence)
-    gzFile file;
-    z_off_t offset;
-    int whence;
-{
-    z_off64_t ret;
-
-    ret = gzseek64(file, (z_off64_t)offset, whence);
-    return ret == (z_off_t)ret ? (z_off_t)ret : -1;
-}
-
-/* -- see zlib.h -- */
-z_off64_t ZEXPORT gztell64(file)
-    gzFile file;
-{
-    gz_statep state;
-
-    /* get internal structure and check integrity */
-    if (file == NULL)
-        return -1;
-    state = (gz_statep)file;
-    if (state->mode != GZ_READ && state->mode != GZ_WRITE)
-        return -1;
-
-    /* return position */
-    return state->pos + (state->seek ? state->skip : 0);
-}
-
-/* -- see zlib.h -- */
-z_off_t ZEXPORT gztell(file)
-    gzFile file;
-{
-    z_off64_t ret;
-
-    ret = gztell64(file);
-    return ret == (z_off_t)ret ? (z_off_t)ret : -1;
-}
-
-/* -- see zlib.h -- */
-z_off64_t ZEXPORT gzoffset64(file)
-    gzFile file;
-{
-    z_off64_t offset;
-    gz_statep state;
-
-    /* get internal structure and check integrity */
-    if (file == NULL)
-        return -1;
-    state = (gz_statep)file;
-    if (state->mode != GZ_READ && state->mode != GZ_WRITE)
-        return -1;
-
-    /* compute and return effective offset in file */
-    offset = LSEEK(state->fd, 0, SEEK_CUR);
-    if (offset == -1)
-        return -1;
-    if (state->mode == GZ_READ)             /* reading */
-        offset -= state->strm.avail_in;     /* don't count buffered input */
-    return offset;
-}
-
-/* -- see zlib.h -- */
-z_off_t ZEXPORT gzoffset(file)
-    gzFile file;
-{
-    z_off64_t ret;
-
-    ret = gzoffset64(file);
-    return ret == (z_off_t)ret ? (z_off_t)ret : -1;
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzeof(file)
-    gzFile file;
-{
-    gz_statep state;
-
-    /* get internal structure and check integrity */
-    if (file == NULL)
-        return 0;
-    state = (gz_statep)file;
-    if (state->mode != GZ_READ && state->mode != GZ_WRITE)
-        return 0;
-
-    /* return end-of-file state */
-    return state->mode == GZ_READ ?
-        (state->eof && state->strm.avail_in == 0 && state->have == 0) : 0;
-}
-
-/* -- see zlib.h -- */
-const char * ZEXPORT gzerror(file, errnum)
-    gzFile file;
-    int *errnum;
-{
-    gz_statep state;
-
-    /* get internal structure and check integrity */
-    if (file == NULL)
-        return NULL;
-    state = (gz_statep)file;
-    if (state->mode != GZ_READ && state->mode != GZ_WRITE)
-        return NULL;
-
-    /* return error information */
-    if (errnum != NULL)
-        *errnum = state->err;
-    return state->msg == NULL ? "" : state->msg;
-}
-
-/* -- see zlib.h -- */
-void ZEXPORT gzclearerr(file)
-    gzFile file;
-{
-    gz_statep state;
-
-    /* get internal structure and check integrity */
-    if (file == NULL)
-        return;
-    state = (gz_statep)file;
-    if (state->mode != GZ_READ && state->mode != GZ_WRITE)
-        return;
-
-    /* clear error and end-of-file */
-    if (state->mode == GZ_READ)
-        state->eof = 0;
-    gz_error(state, Z_OK, NULL);
-}
-
-/* Create an error message in allocated memory and set state->err and
-   state->msg accordingly.  Free any previous error message already there.  Do
-   not try to free or allocate space if the error is Z_MEM_ERROR (out of
-   memory).  Simply save the error message as a static string.  If there is an
-   allocation failure constructing the error message, then convert the error to
-   out of memory. */
-void ZLIB_INTERNAL gz_error(state, err, msg)
-    gz_statep state;
-    int err;
-    const char *msg;
-{
-    /* free previously allocated message and clear */
-    if (state->msg != NULL) {
-        if (state->err != Z_MEM_ERROR)
-            free(state->msg);
-        state->msg = NULL;
-    }
-
-    /* set error code, and if no message, then done */
-    state->err = err;
-    if (msg == NULL)
-        return;
-
-    /* for an out of memory error, save as static string */
-    if (err == Z_MEM_ERROR) {
-        state->msg = (char *)msg;
-        return;
-    }
-
-    /* construct error message with path */
-    if ((state->msg = malloc(strlen(state->path) + strlen(msg) + 3)) == NULL) {
-        state->err = Z_MEM_ERROR;
-        state->msg = (char *)"out of memory";
-        return;
-    }
-    strcpy(state->msg, state->path);
-    strcat(state->msg, ": ");
-    strcat(state->msg, msg);
-    return;
-}
-
-#ifndef INT_MAX
-/* portably return maximum value for an int (when limits.h presumed not
-   available) -- we need to do this to cover cases where 2's complement not
-   used, since C standard permits 1's complement and sign-bit representations,
-   otherwise we could just use ((unsigned)-1) >> 1 */
-unsigned ZLIB_INTERNAL gz_intmax()
-{
-    unsigned p, q;
-
-    p = 1;
-    do {
-        q = p;
-        p <<= 1;
-        p++;
-    } while (p > q);
-    return q >> 1;
-}
-#endif