diff options
Diffstat (limited to 'debian/man/colprof.1')
| -rw-r--r-- | debian/man/colprof.1 | 371 |
1 files changed, 371 insertions, 0 deletions
diff --git a/debian/man/colprof.1 b/debian/man/colprof.1 new file mode 100644 index 0000000..b9feb69 --- /dev/null +++ b/debian/man/colprof.1 @@ -0,0 +1,371 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH CREATE "1" "September 2014" "Create ICC profile, Version 1.6.3" "User Commands" +.SH NAME +Create \- Create ICC profile. +.SH DESCRIPTION +Create ICC profile, Version 1.6.3 +Author: Graeme W. Gill, licensed under the AGPL Version 3 +.IP +Diagnostic: Unknown flag '\-' +.PP +usage: debian/tmp/usr/bin/colprof [\-options] inoutfile +.TP +\fB\-v\fR +Verbose mode +.HP +\fB\-A\fR manufacturer Manufacturer description string +.TP +\fB\-M\fR model +Model description string +.TP +\fB\-D\fR description +Profile Description string (Default "inoutfile") +.TP +\fB\-C\fR copyright +Copyright string +.TP +\fB\-Z\fR tmnb +Attributes: Transparency, Matte, Negative, BlackAndWhite +.TP +\fB\-Z\fR prsa +Default intent: Perceptual, Rel. Colorimetric, Saturation, Abs. Colorimetric +.TP +\fB\-q\fR lmhu +Quality \- Low, Medium (def), High, Ultra +.TP +\fB\-b\fR [lmhun] +Low quality B2A table \- or specific B2A quality or none for input device +.TP +\fB\-ni\fR +Don't create input (Device) shaper curves +.TP +\fB\-np\fR +Don't create input (Device) grid position curves +.TP +\fB\-no\fR +Don't create output (PCS) shaper curves +.TP +\fB\-nc\fR +Don't put the input .ti3 data in the profile +.TP +\fB\-k\fR zhxr +Black value target: z = zero K, +h = 0.5 K, x = max K, r = ramp K (def.) +.HP +\fB\-k\fR p stle stpo enpo enle shape +.IP +stle: K level at White 0.0 \- 1.0 +stpo: start point of transition Wh 0.0 \- Bk 1.0 +enpo: End point of transition Wh 0.0 \- Bk 1.0 +enle: K level at Black 0.0 \- 1.0 +shape: 1.0 = straight, 0.0\-1.0 concave, 1.0\-2.0 convex +.TP +\fB\-K\fR parameters +Same as \fB\-k\fR, but target is K locus rather than K value itself +.TP +\fB\-l\fR tlimit +override total ink limit, 0 \- 400% (default from .ti3) +.TP +\fB\-L\fR klimit +override black ink limit, 0 \- 100% (default from .ti3) +.TP +\fB\-a\fR lxXgsmGS +Algorithm type override +l = Lab cLUT (def.), x = XYZ cLUT, X = display XYZ cLUT + matrix +g = gamma+matrix, s = shaper+matrix, m = matrix only, +G = single gamma+matrix, S = single shaper+matrix +.TP +\fB\-u\fR +If input profile, auto scale WP to allow extrapolation +.TP +\fB\-uc\fR +If input profile, clip cLUT values above WP +.TP +\fB\-U\fR scale +If input profile, scale media white point by scale +.TP +\fB\-R\fR +Restrict white <= 1.0, black and primaries to be +ve +.TP +\fB\-V\fR demphasis +Degree of dark region cLUT grid emphasis 1.0\-4.0 (default 1.00 = none) +.TP +\fB\-f\fR [illum] +Use Fluorescent Whitening Agent compensation [opt. simulated inst. illum.: +.IP +M0, M1, M2, A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp] +.TP +\fB\-i\fR illum +Choose illuminant for computation of CIE XYZ from spectral data & FWA: +.IP +A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp +.TP +\fB\-o\fR observ +Choose CIE Observer for spectral data: +.IP +1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2 +.TP +\fB\-r\fR avgdev +Average deviation of device+instrument readings as a percentage (default 0.50%) +.TP +\fB\-s\fR src.icc +Apply gamut mapping to output profile perceptual B2A table for given source space +.TP +\fB\-S\fR src.icc +Apply gamut mapping to output profile perceptual and saturation B2A table +.TP +\fB\-nP\fR +Use colormetric source gamut to make output profile perceptual table +.TP +\fB\-nS\fR +Use colormetric source gamut to make output profile saturation table +.TP +\fB\-g\fR src.gam +Use source image gamut as well for output profile gamut mapping +.TP +\fB\-p\fR absprof,... +Incorporate abstract profile(s) into output tables +.TP +\fB\-t\fR intent +Override gamut mapping intent for output profile perceptual table: +.TP +\fB\-T\fR intent +Override gamut mapping intent for output profile saturation table: +.IP +a \- Absolute Colorimetric (in Jab) [ICC Absolute Colorimetric] +.IP +aw \- Absolute Colorimetric (in Jab) with scaling to fit white point +aa \- Absolute Appearance +.IP +r \- White Point Matched Appearance [ICC Relative Colorimetric] +.IP +la \- Luminance axis matched Appearance +.IP +p \- Perceptual (Preferred) (Default) [ICC Perceptual] +.IP +pa \- Perceptual Apperance +ms \- Saturation +.IP +s \- Enhanced Saturation [ICC Saturation] +.IP +al \- Absolute Colorimetric (Lab) +rl \- White Point Matched Colorimetric (Lab) +.TP +\fB\-c\fR viewcond +set input viewing conditions for output profile CIECAM02 gamut mapping, +.IP +either an enumerated choice, or a parameter +.TP +\fB\-d\fR viewcond +set output viewing conditions for output profile CIECAM02 gamut mapping +.IP +either an enumerated choice, or a parameter +Also sets out of gamut clipping CAM space. +either an enumerated choice, or a series of parameters:value changes +.IP +pp \- Practical Reflection Print (ISO\-3664 P2) +pe \- Print evaluation environment (CIE 116\-1995) +pc \- Critical print evaluation environment (ISO\-3664 P1) +mt \- Monitor in typical work environment +mb \- Bright monitor in bright work environment +md \- Monitor in darkened work environment +jm \- Projector in dim environment +jd \- Projector in dark environment +tv \- Television/Film Studio +.IP +pcd \- Photo CD \- original scene outdoors +.IP +ob \- Original scene \- Bright Outdoors +cx \- Cut Sheet Transparencies on a viewing box +.TP +\fB\-P\fR +Create gamut gammap_p.wrl and gammap_s.wrl diagostics +.TP +\fB\-O\fR outputfile +Override the default output filename. +.TP +inoutfile +Base name for input.ti3/output.icc file +.PP +Author: Graeme W. Gill, licensed under the AGPL Version 3 +.IP +Diagnostic: Unknown flag '\-' +.PP +usage: debian/tmp/usr/bin/colprof [\-options] inoutfile +.TP +\fB\-v\fR +Verbose mode +.HP +\fB\-A\fR manufacturer Manufacturer description string +.TP +\fB\-M\fR model +Model description string +.TP +\fB\-D\fR description +Profile Description string (Default "inoutfile") +.TP +\fB\-C\fR copyright +Copyright string +.TP +\fB\-Z\fR tmnb +Attributes: Transparency, Matte, Negative, BlackAndWhite +.TP +\fB\-Z\fR prsa +Default intent: Perceptual, Rel. Colorimetric, Saturation, Abs. Colorimetric +.TP +\fB\-q\fR lmhu +Quality \- Low, Medium (def), High, Ultra +.TP +\fB\-b\fR [lmhun] +Low quality B2A table \- or specific B2A quality or none for input device +.TP +\fB\-ni\fR +Don't create input (Device) shaper curves +.TP +\fB\-np\fR +Don't create input (Device) grid position curves +.TP +\fB\-no\fR +Don't create output (PCS) shaper curves +.TP +\fB\-nc\fR +Don't put the input .ti3 data in the profile +.TP +\fB\-k\fR zhxr +Black value target: z = zero K, +h = 0.5 K, x = max K, r = ramp K (def.) +.HP +\fB\-k\fR p stle stpo enpo enle shape +.IP +stle: K level at White 0.0 \- 1.0 +stpo: start point of transition Wh 0.0 \- Bk 1.0 +enpo: End point of transition Wh 0.0 \- Bk 1.0 +enle: K level at Black 0.0 \- 1.0 +shape: 1.0 = straight, 0.0\-1.0 concave, 1.0\-2.0 convex +.TP +\fB\-K\fR parameters +Same as \fB\-k\fR, but target is K locus rather than K value itself +.TP +\fB\-l\fR tlimit +override total ink limit, 0 \- 400% (default from .ti3) +.TP +\fB\-L\fR klimit +override black ink limit, 0 \- 100% (default from .ti3) +.TP +\fB\-a\fR lxXgsmGS +Algorithm type override +l = Lab cLUT (def.), x = XYZ cLUT, X = display XYZ cLUT + matrix +g = gamma+matrix, s = shaper+matrix, m = matrix only, +G = single gamma+matrix, S = single shaper+matrix +.TP +\fB\-u\fR +If input profile, auto scale WP to allow extrapolation +.TP +\fB\-uc\fR +If input profile, clip cLUT values above WP +.TP +\fB\-U\fR scale +If input profile, scale media white point by scale +.TP +\fB\-R\fR +Restrict white <= 1.0, black and primaries to be +ve +.TP +\fB\-V\fR demphasis +Degree of dark region cLUT grid emphasis 1.0\-4.0 (default 1.00 = none) +.TP +\fB\-f\fR [illum] +Use Fluorescent Whitening Agent compensation [opt. simulated inst. illum.: +.IP +M0, M1, M2, A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp] +.TP +\fB\-i\fR illum +Choose illuminant for computation of CIE XYZ from spectral data & FWA: +.IP +A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp +.TP +\fB\-o\fR observ +Choose CIE Observer for spectral data: +.IP +1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2 +.TP +\fB\-r\fR avgdev +Average deviation of device+instrument readings as a percentage (default 0.50%) +.TP +\fB\-s\fR src.icc +Apply gamut mapping to output profile perceptual B2A table for given source space +.TP +\fB\-S\fR src.icc +Apply gamut mapping to output profile perceptual and saturation B2A table +.TP +\fB\-nP\fR +Use colormetric source gamut to make output profile perceptual table +.TP +\fB\-nS\fR +Use colormetric source gamut to make output profile saturation table +.TP +\fB\-g\fR src.gam +Use source image gamut as well for output profile gamut mapping +.TP +\fB\-p\fR absprof,... +Incorporate abstract profile(s) into output tables +.TP +\fB\-t\fR intent +Override gamut mapping intent for output profile perceptual table: +.TP +\fB\-T\fR intent +Override gamut mapping intent for output profile saturation table: +.IP +a \- Absolute Colorimetric (in Jab) [ICC Absolute Colorimetric] +.IP +aw \- Absolute Colorimetric (in Jab) with scaling to fit white point +aa \- Absolute Appearance +.IP +r \- White Point Matched Appearance [ICC Relative Colorimetric] +.IP +la \- Luminance axis matched Appearance +.IP +p \- Perceptual (Preferred) (Default) [ICC Perceptual] +.IP +pa \- Perceptual Apperance +ms \- Saturation +.IP +s \- Enhanced Saturation [ICC Saturation] +.IP +al \- Absolute Colorimetric (Lab) +rl \- White Point Matched Colorimetric (Lab) +.TP +\fB\-c\fR viewcond +set input viewing conditions for output profile CIECAM02 gamut mapping, +.IP +either an enumerated choice, or a parameter +.TP +\fB\-d\fR viewcond +set output viewing conditions for output profile CIECAM02 gamut mapping +.IP +either an enumerated choice, or a parameter +Also sets out of gamut clipping CAM space. +either an enumerated choice, or a series of parameters:value changes +.IP +pp \- Practical Reflection Print (ISO\-3664 P2) +pe \- Print evaluation environment (CIE 116\-1995) +pc \- Critical print evaluation environment (ISO\-3664 P1) +mt \- Monitor in typical work environment +mb \- Bright monitor in bright work environment +md \- Monitor in darkened work environment +jm \- Projector in dim environment +jd \- Projector in dark environment +tv \- Television/Film Studio +.IP +pcd \- Photo CD \- original scene outdoors +.IP +ob \- Original scene \- Bright Outdoors +cx \- Cut Sheet Transparencies on a viewing box +.TP +\fB\-P\fR +Create gamut gammap_p.wrl and gammap_s.wrl diagostics +.TP +\fB\-O\fR outputfile +Override the default output filename. +.TP +inoutfile +Base name for input.ti3/output.icc file |