diff options
Diffstat (limited to 'debian/man/dispcal.1')
| -rw-r--r-- | debian/man/dispcal.1 | 307 |
1 files changed, 307 insertions, 0 deletions
diff --git a/debian/man/dispcal.1 b/debian/man/dispcal.1 new file mode 100644 index 0000000..1570b98 --- /dev/null +++ b/debian/man/dispcal.1 @@ -0,0 +1,307 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH CALIBRATE "1" "September 2014" "Calibrate a Display, Version 1.6.3" "User Commands" +.SH NAME +Calibrate \- Calibrate a Display. +.SH DESCRIPTION +Calibrate a Display, Version 1.6.3 +Author: Graeme W. Gill, licensed under the AGPL Version 3 +Diagnostic: Usage requested +usage: dispcal [options] outfile +.TP +\fB\-v\fR [n] +Verbose mode +.HP +\fB\-display\fR displayname Choose X11 display name +.TP +\fB\-d\fR n[,m] +Choose the display n from the following list (default 1) +Optionally choose different display m for VideoLUT access +.IP +1 = 'Screen 1, Output DVI\-I\-1 at 0, 0, width 1920, height 1080' +.TP +\fB\-dweb[\fR:port] +Display via a web server at port (default 8080) +.TP +\fB\-c\fR listno +Set communication port from the following list (default 1) +.IP +** No ports found ** +.TP +\fB\-r\fR +Report on the calibrated display then exit +.TP +\fB\-R\fR +Report on the uncalibrated display then exit +.TP +\fB\-m\fR +Skip adjustment of the monitor controls +.TP +\fB\-o\fR [profile.icc] +Create fast matrix/shaper profile [different filename to outfile.icc] +.TP +\fB\-O\fR "description" +Fast ICC Profile Description string (Default "outfile") +.TP +\fB\-u\fR +Update previous calibration and (if \fB\-o\fR used) ICC profile VideoLUTs +.TP +\fB\-q\fR [vlmh] +Quality \- Very Low, Low, Medium (def), High +.TP +\fB\-p\fR +Use telephoto mode (ie. for a projector) (if available) +.TP +\fB\-t\fR [temp] +White Daylight locus target, optional target temperaturee in deg. K (deflt.) +.TP +\fB\-T\fR [temp] +White Black Body locus target, optional target temperaturee in deg. K +.TP +\fB\-w\fR x,y +Set the target white point as chromaticity coordinates +.TP +\fB\-b\fR bright +Set the target white brightness in cd/m^2 +.TP +\fB\-g\fR gamma +Set the target response curve advertised gamma (Def. 2.4) +Use "\-gl" for L*a*b* curve +Use "\-gs" for sRGB curve +Use "\-g709" for REC 709 curve (should use \fB\-a\fR as well!) +Use "\-g240" for SMPTE 240M curve (should use \fB\-a\fR as well!) +Use "\-G2.4 \fB\-f0\fR" for BT.1886 +.TP +\fB\-G\fR gamma +Set the target response curve actual technical gamma +.TP +\fB\-f\fR [degree] +Amount of black level accounted for with output offset (default all output offset) +.TP +\fB\-a\fR ambient +Use viewing condition adjustment for ambient in Lux +.TP +\fB\-k\fR factor +Amount to correct black hue, 0 = none, 1 = full, Default = Automatic +.TP +\fB\-A\fR rate +Rate of blending from neutral to black point. Default 4.0 +.TP +\fB\-B\fR blkbright +Set the target black brightness in cd/m^2 +.TP +\fB\-e\fR [n] +Run n verify passes on final curves +.TP +\fB\-z\fR +Run only verify pass on installed calibration curves +.TP +\fB\-P\fR ho,vo,ss[,vs] +Position test window and scale it +ho,vi: 0.0 = left/top, 0.5 = center, 1.0 = right/bottom etc. +ss: 0.5 = half, 1.0 = normal, 2.0 = double etc. +.TP +\fB\-F\fR +Fill whole screen with black background +.TP +\fB\-n\fR +Don't set override redirect on test window +.TP +\fB\-E\fR +Encode the test values for video range 16..235/255 +.TP +\fB\-J\fR +Run instrument calibration first (used rarely) +.TP +\fB\-N\fR +Disable initial calibration of instrument if possible +.TP +\fB\-H\fR +Use high resolution spectrum mode (if available) +.TP +\fB\-X\fR file.ccmx +Apply Colorimeter Correction Matrix +.TP +\fB\-X\fR file.ccss +Use Colorimeter Calibration Spectral Samples for calibration +.TP +\fB\-Q\fR observ +Choose CIE Observer for spectrometer or CCSS colorimeter data: +1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2, 1964_10c +.TP +\fB\-I\fR b|w +Drift compensation, Black: \fB\-Ib\fR, White: \fB\-Iw\fR, Both: \fB\-Ibw\fR +.TP +\fB\-Y\fR R:rate +Override measured refresh rate with rate Hz +.TP +\fB\-Y\fR A +Use non\-adaptive integration time mode (if available). +.TP +\fB\-Y\fR p +Don't wait for the instrument to be placed on the display +.TP +\fB\-C\fR "command" +Invoke shell "command" each time a color is set +.TP +\fB\-M\fR "command" +Invoke shell "command" each time a color is measured +.TP +\fB\-W\fR n|h|x +Override serial port flow control: n = none, h = HW, x = Xon/Xoff +.TP +\fB\-D\fR [level] +Print debug diagnostics to stderr +.TP +inoutfile +Base name for created or updated .cal and .icc output files +.PP +Author: Graeme W. Gill, licensed under the AGPL Version 3 +Diagnostic: Usage requested +usage: dispcal [options] outfile +.TP +\fB\-v\fR [n] +Verbose mode +.HP +\fB\-display\fR displayname Choose X11 display name +.TP +\fB\-d\fR n[,m] +Choose the display n from the following list (default 1) +Optionally choose different display m for VideoLUT access +.IP +1 = 'Screen 1, Output DVI\-I\-1 at 0, 0, width 1920, height 1080' +.TP +\fB\-dweb[\fR:port] +Display via a web server at port (default 8080) +.TP +\fB\-c\fR listno +Set communication port from the following list (default 1) +.IP +** No ports found ** +.TP +\fB\-r\fR +Report on the calibrated display then exit +.TP +\fB\-R\fR +Report on the uncalibrated display then exit +.TP +\fB\-m\fR +Skip adjustment of the monitor controls +.TP +\fB\-o\fR [profile.icc] +Create fast matrix/shaper profile [different filename to outfile.icc] +.TP +\fB\-O\fR "description" +Fast ICC Profile Description string (Default "outfile") +.TP +\fB\-u\fR +Update previous calibration and (if \fB\-o\fR used) ICC profile VideoLUTs +.TP +\fB\-q\fR [vlmh] +Quality \- Very Low, Low, Medium (def), High +.TP +\fB\-p\fR +Use telephoto mode (ie. for a projector) (if available) +.TP +\fB\-t\fR [temp] +White Daylight locus target, optional target temperaturee in deg. K (deflt.) +.TP +\fB\-T\fR [temp] +White Black Body locus target, optional target temperaturee in deg. K +.TP +\fB\-w\fR x,y +Set the target white point as chromaticity coordinates +.TP +\fB\-b\fR bright +Set the target white brightness in cd/m^2 +.TP +\fB\-g\fR gamma +Set the target response curve advertised gamma (Def. 2.4) +Use "\-gl" for L*a*b* curve +Use "\-gs" for sRGB curve +Use "\-g709" for REC 709 curve (should use \fB\-a\fR as well!) +Use "\-g240" for SMPTE 240M curve (should use \fB\-a\fR as well!) +Use "\-G2.4 \fB\-f0\fR" for BT.1886 +.TP +\fB\-G\fR gamma +Set the target response curve actual technical gamma +.TP +\fB\-f\fR [degree] +Amount of black level accounted for with output offset (default all output offset) +.TP +\fB\-a\fR ambient +Use viewing condition adjustment for ambient in Lux +.TP +\fB\-k\fR factor +Amount to correct black hue, 0 = none, 1 = full, Default = Automatic +.TP +\fB\-A\fR rate +Rate of blending from neutral to black point. Default 4.0 +.TP +\fB\-B\fR blkbright +Set the target black brightness in cd/m^2 +.TP +\fB\-e\fR [n] +Run n verify passes on final curves +.TP +\fB\-z\fR +Run only verify pass on installed calibration curves +.TP +\fB\-P\fR ho,vo,ss[,vs] +Position test window and scale it +ho,vi: 0.0 = left/top, 0.5 = center, 1.0 = right/bottom etc. +ss: 0.5 = half, 1.0 = normal, 2.0 = double etc. +.TP +\fB\-F\fR +Fill whole screen with black background +.TP +\fB\-n\fR +Don't set override redirect on test window +.TP +\fB\-E\fR +Encode the test values for video range 16..235/255 +.TP +\fB\-J\fR +Run instrument calibration first (used rarely) +.TP +\fB\-N\fR +Disable initial calibration of instrument if possible +.TP +\fB\-H\fR +Use high resolution spectrum mode (if available) +.TP +\fB\-X\fR file.ccmx +Apply Colorimeter Correction Matrix +.TP +\fB\-X\fR file.ccss +Use Colorimeter Calibration Spectral Samples for calibration +.TP +\fB\-Q\fR observ +Choose CIE Observer for spectrometer or CCSS colorimeter data: +1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2, 1964_10c +.TP +\fB\-I\fR b|w +Drift compensation, Black: \fB\-Ib\fR, White: \fB\-Iw\fR, Both: \fB\-Ibw\fR +.TP +\fB\-Y\fR R:rate +Override measured refresh rate with rate Hz +.TP +\fB\-Y\fR A +Use non\-adaptive integration time mode (if available). +.TP +\fB\-Y\fR p +Don't wait for the instrument to be placed on the display +.TP +\fB\-C\fR "command" +Invoke shell "command" each time a color is set +.TP +\fB\-M\fR "command" +Invoke shell "command" each time a color is measured +.TP +\fB\-W\fR n|h|x +Override serial port flow control: n = none, h = HW, x = Xon/Xoff +.TP +\fB\-D\fR [level] +Print debug diagnostics to stderr +.TP +inoutfile +Base name for created or updated .cal and .icc output files |