summaryrefslogtreecommitdiff
path: root/debian/man/dispcal.1
diff options
context:
space:
mode:
Diffstat (limited to 'debian/man/dispcal.1')
-rw-r--r--debian/man/dispcal.1156
1 files changed, 156 insertions, 0 deletions
diff --git a/debian/man/dispcal.1 b/debian/man/dispcal.1
new file mode 100644
index 0000000..20e9442
--- /dev/null
+++ b/debian/man/dispcal.1
@@ -0,0 +1,156 @@
+.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1.
+.TH CALIBRATE "1" "September 2014" "dispcal" "User Commands"
+.SH NAME
+Calibrate \- Calibrate a Display.
+.SH DESCRIPTION
+Calibrate a Display
+.SH SYNOPSIS
+.B dispcal
+.RB [options]\ outfile
+.TP
+\fB\-v\fR [n]
+Verbose mode
+.HP
+\fB\-display\fR displayname Choose X11 display name
+.TP
+\fB\-d\fR n[,m]
+Choose the display n from the following list (default 1)
+Optionally choose different display m for VideoLUT access
+.IP
+1 = 'Screen 1, Output DVI\-I\-1 at 0, 0, width 1920, height 1080'
+.TP
+\fB\-dweb[\fR:port]
+Display via a web server at port (default 8080)
+.TP
+\fB\-c\fR listno
+Set communication port from the following list (default 1)
+.IP
+** No ports found **
+.TP
+\fB\-r\fR
+Report on the calibrated display then exit
+.TP
+\fB\-R\fR
+Report on the uncalibrated display then exit
+.TP
+\fB\-m\fR
+Skip adjustment of the monitor controls
+.TP
+\fB\-o\fR [profile.icc]
+Create fast matrix/shaper profile [different filename to outfile.icc]
+.TP
+\fB\-O\fR "description"
+Fast ICC Profile Description string (Default "outfile")
+.TP
+\fB\-u\fR
+Update previous calibration and (if \fB\-o\fR used) ICC profile VideoLUTs
+.TP
+\fB\-q\fR [vlmh]
+Quality \- Very Low, Low, Medium (def), High
+.TP
+\fB\-p\fR
+Use telephoto mode (ie. for a projector) (if available)
+.TP
+\fB\-t\fR [temp]
+White Daylight locus target, optional target temperaturee in deg. K (deflt.)
+.TP
+\fB\-T\fR [temp]
+White Black Body locus target, optional target temperaturee in deg. K
+.TP
+\fB\-w\fR x,y
+Set the target white point as chromaticity coordinates
+.TP
+\fB\-b\fR bright
+Set the target white brightness in cd/m^2
+.TP
+\fB\-g\fR gamma
+Set the target response curve advertised gamma (Def. 2.4)
+Use "\-gl" for L*a*b* curve
+Use "\-gs" for sRGB curve
+Use "\-g709" for REC 709 curve (should use \fB\-a\fR as well!)
+Use "\-g240" for SMPTE 240M curve (should use \fB\-a\fR as well!)
+Use "\-G2.4 \fB\-f0\fR" for BT.1886
+.TP
+\fB\-G\fR gamma
+Set the target response curve actual technical gamma
+.TP
+\fB\-f\fR [degree]
+Amount of black level accounted for with output offset (default all output offset)
+.TP
+\fB\-a\fR ambient
+Use viewing condition adjustment for ambient in Lux
+.TP
+\fB\-k\fR factor
+Amount to correct black hue, 0 = none, 1 = full, Default = Automatic
+.TP
+\fB\-A\fR rate
+Rate of blending from neutral to black point. Default 4.0
+.TP
+\fB\-B\fR blkbright
+Set the target black brightness in cd/m^2
+.TP
+\fB\-e\fR [n]
+Run n verify passes on final curves
+.TP
+\fB\-z\fR
+Run only verify pass on installed calibration curves
+.TP
+\fB\-P\fR ho,vo,ss[,vs]
+Position test window and scale it
+ho,vi: 0.0 = left/top, 0.5 = center, 1.0 = right/bottom etc.
+ss: 0.5 = half, 1.0 = normal, 2.0 = double etc.
+.TP
+\fB\-F\fR
+Fill whole screen with black background
+.TP
+\fB\-n\fR
+Don't set override redirect on test window
+.TP
+\fB\-E\fR
+Encode the test values for video range 16..235/255
+.TP
+\fB\-J\fR
+Run instrument calibration first (used rarely)
+.TP
+\fB\-N\fR
+Disable initial calibration of instrument if possible
+.TP
+\fB\-H\fR
+Use high resolution spectrum mode (if available)
+.TP
+\fB\-X\fR file.ccmx
+Apply Colorimeter Correction Matrix
+.TP
+\fB\-X\fR file.ccss
+Use Colorimeter Calibration Spectral Samples for calibration
+.TP
+\fB\-Q\fR observ
+Choose CIE Observer for spectrometer or CCSS colorimeter data:
+1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2, 1964_10c
+.TP
+\fB\-I\fR b|w
+Drift compensation, Black: \fB\-Ib\fR, White: \fB\-Iw\fR, Both: \fB\-Ibw\fR
+.TP
+\fB\-Y\fR R:rate
+Override measured refresh rate with rate Hz
+.TP
+\fB\-Y\fR A
+Use non\-adaptive integration time mode (if available).
+.TP
+\fB\-Y\fR p
+Don't wait for the instrument to be placed on the display
+.TP
+\fB\-C\fR "command"
+Invoke shell "command" each time a color is set
+.TP
+\fB\-M\fR "command"
+Invoke shell "command" each time a color is measured
+.TP
+\fB\-W\fR n|h|x
+Override serial port flow control: n = none, h = HW, x = Xon/Xoff
+.TP
+\fB\-D\fR [level]
+Print debug diagnostics to stderr
+.TP
+inoutfile
+Base name for created or updated .cal and .icc output files