diff options
Diffstat (limited to 'debian/man')
46 files changed, 5918 insertions, 0 deletions
diff --git a/debian/man/applycal.1 b/debian/man/applycal.1 new file mode 100644 index 0000000..c512245 --- /dev/null +++ b/debian/man/applycal.1 @@ -0,0 +1,59 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH APPLY "1" "September 2014" "Apply device calibration to an ICC profile, Version 1.6.3" "User Commands" +.SH NAME +Apply \- Apply device calibration to an ICC profile. +.SH DESCRIPTION +Apply device calibration to an ICC profile, Version 1.6.3 +Author: Graeme W. Gill, licensed under the AGPL Version 3 +.IP +Diagnostic: Too few arguments +.PP +usage: applycal [\-options] [calfile.cal] inprof.icc [outprof.icc] +.TP +\fB\-v\fR +Verbose mode +.TP +\fB\-a\fR +Apply or re\-apply calibration (default) +.TP +\fB\-u\fR +Remove calibration +.TP +\fB\-c\fR +Check calibration +.TP +calfile.cal +Calibration file to apply +.TP +inprof.icc +ICC profile to read +.TP +outprof.icc +modified ICC profile to write +.PP +Author: Graeme W. Gill, licensed under the AGPL Version 3 +.IP +Diagnostic: Too few arguments +.PP +usage: applycal [\-options] [calfile.cal] inprof.icc [outprof.icc] +.TP +\fB\-v\fR +Verbose mode +.TP +\fB\-a\fR +Apply or re\-apply calibration (default) +.TP +\fB\-u\fR +Remove calibration +.TP +\fB\-c\fR +Check calibration +.TP +calfile.cal +Calibration file to apply +.TP +inprof.icc +ICC profile to read +.TP +outprof.icc +modified ICC profile to write diff --git a/debian/man/average.1 b/debian/man/average.1 new file mode 100644 index 0000000..73fe678 --- /dev/null +++ b/debian/man/average.1 @@ -0,0 +1,52 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH AVERAGE "1" "September 2014" "Average or merge values in .ti3 like files, Version 1.6.3" "User Commands" +.SH NAME +Average \- Average or merge values in .ti3 like files. +.SH DESCRIPTION +Average or merge values in .ti3 like files, Version 1.6.3 +.IP +Diagnostic: Too few arguments (1, minimum is 2) +.PP +Author: Graeme W. Gill, licensed under the AGPL Version 3 +usage: average [\-options] input1.ti3 input2.ti3 ... output.ti3 +.TP +\fB\-v\fR +Verbose +.TP +\fB\-m\fR +Merge rather than average +.TP +input1.ti3 +First input file +.TP +input2.ti3 +Second input file +.TP +\&... +etc. +.TP +output.ti3 +Resulting averaged or merged output file +.IP +Diagnostic: Too few arguments (1, minimum is 2) +.PP +Author: Graeme W. Gill, licensed under the AGPL Version 3 +usage: average [\-options] input1.ti3 input2.ti3 ... output.ti3 +.TP +\fB\-v\fR +Verbose +.TP +\fB\-m\fR +Merge rather than average +.TP +input1.ti3 +First input file +.TP +input2.ti3 +Second input file +.TP +\&... +etc. +.TP +output.ti3 +Resulting averaged or merged output file diff --git a/debian/man/cb2ti3.1 b/debian/man/cb2ti3.1 new file mode 100644 index 0000000..16681cb --- /dev/null +++ b/debian/man/cb2ti3.1 @@ -0,0 +1,35 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH CONVERT "1" "September 2014" "Convert Colorblind raw device profile data to Argyll data, Version 1.6.3" "User Commands" +.SH NAME +Convert \- Convert Colorblind raw device profile data to Argyll data. +.SH DESCRIPTION +Convert Colorblind raw device profile data to Argyll data, Version 1.6.3 +Author: Graeme W. Gill, licensed under the AGPL Version 3 +usage: cb2ti3 [\-v] [\-l limit] infile outfile +.TP +\fB\-v\fR +Verbose mode +.TP +\fB\-l\fR limit +Set inklimit in .ti3 file +.TP +infile +Base name for input.CMY and input.nCIE file +.TP +outfile +Base name for output.ti3 file +.PP +Author: Graeme W. Gill, licensed under the AGPL Version 3 +usage: cb2ti3 [\-v] [\-l limit] infile outfile +.TP +\fB\-v\fR +Verbose mode +.TP +\fB\-l\fR limit +Set inklimit in .ti3 file +.TP +infile +Base name for input.CMY and input.nCIE file +.TP +outfile +Base name for output.ti3 file diff --git a/debian/man/cctiff.1 b/debian/man/cctiff.1 new file mode 100644 index 0000000..fd017d0 --- /dev/null +++ b/debian/man/cctiff.1 @@ -0,0 +1,145 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH COLOR "1" "September 2014" "Color Correct a TIFF or JPEG file using any sequence of ICC profiles or Calibrations, V1.6.3" "User Commands" +.SH NAME +Color \- Color Correct a TIFF file using any sequence of ICC profiles or Calibrations. +.SH DESCRIPTION +Color Correct a TIFF or JPEG file using any sequence of ICC profiles or Calibrations, V1.6.3 +Author: Graeme W. Gill, licensed under the AGPL Version 3 +.IP +Diagnostic: Unknown flag '\-' +.PP +usage: cctiff [\-options] { [\-i intent] profile.icc | calbrtn.cal ...} infile.tif/jpg outfile.tif/jpg +.TP +\fB\-v\fR +Verbose. +.TP +\fB\-c\fR +Combine linearisation curves into one transform. +.TP +\fB\-p\fR +Use slow precise correction. +.TP +\fB\-k\fR +Check fast result against precise, and report. +.TP +\fB\-r\fR n +Override the default CLUT resolution +.TP +\fB\-t\fR n +Choose output encoding from 1..n +.TP +\fB\-f\fR [T|J] +Set output format to Tiff or Jpeg (Default is same as input) +.TP +\fB\-q\fR quality +Set JPEG quality 1..100 (Default 80) +.TP +\fB\-a\fR +Read and Write planes > 4 as alpha planes +.TP +\fB\-I\fR +Ignore any file or profile colorspace mismatches +.TP +\fB\-D\fR +Don't append or set the output TIFF or JPEG description +.TP +\fB\-e\fR profile.[icc | tiff | jpg] +Optionally embed a profile in the destination TIFF or JPEG file. +.IP +Then for each profile in sequence: +.TP +\fB\-i\fR intent +p = perceptual, r = relative colorimetric, +s = saturation, a = absolute colorimetric +.TP +\fB\-o\fR order +n = normal (priority: lut > matrix > monochrome) +r = reverse (priority: monochrome > matrix > lut) +.TP +profile.[icc | tiff] +Device, Link or Abstract profile +.IP +( May be embedded profile in TIFF/JPEG file) +.IP +or each calibration file in sequence: +.TP +\fB\-d\fR dir +f = forward cal. (default), b = backwards cal. +.TP +calbrtn.cal +Device calibration file. +.TP +infile.tif/jpg +Input TIFF/JPEG file in appropriate color space +.IP +outfile.tif/jpg Output TIFF/JPEG file +.PP +Author: Graeme W. Gill, licensed under the AGPL Version 3 +.IP +Diagnostic: Unknown flag '\-' +.PP +usage: cctiff [\-options] { [\-i intent] profile.icc | calbrtn.cal ...} infile.tif/jpg outfile.tif/jpg +.TP +\fB\-v\fR +Verbose. +.TP +\fB\-c\fR +Combine linearisation curves into one transform. +.TP +\fB\-p\fR +Use slow precise correction. +.TP +\fB\-k\fR +Check fast result against precise, and report. +.TP +\fB\-r\fR n +Override the default CLUT resolution +.TP +\fB\-t\fR n +Choose output encoding from 1..n +.TP +\fB\-f\fR [T|J] +Set output format to Tiff or Jpeg (Default is same as input) +.TP +\fB\-q\fR quality +Set JPEG quality 1..100 (Default 80) +.TP +\fB\-a\fR +Read and Write planes > 4 as alpha planes +.TP +\fB\-I\fR +Ignore any file or profile colorspace mismatches +.TP +\fB\-D\fR +Don't append or set the output TIFF or JPEG description +.TP +\fB\-e\fR profile.[icc | tiff | jpg] +Optionally embed a profile in the destination TIFF or JPEG file. +.IP +Then for each profile in sequence: +.TP +\fB\-i\fR intent +p = perceptual, r = relative colorimetric, +s = saturation, a = absolute colorimetric +.TP +\fB\-o\fR order +n = normal (priority: lut > matrix > monochrome) +r = reverse (priority: monochrome > matrix > lut) +.TP +profile.[icc | tiff] +Device, Link or Abstract profile +.IP +( May be embedded profile in TIFF/JPEG file) +.IP +or each calibration file in sequence: +.TP +\fB\-d\fR dir +f = forward cal. (default), b = backwards cal. +.TP +calbrtn.cal +Device calibration file. +.TP +infile.tif/jpg +Input TIFF/JPEG file in appropriate color space +.IP +outfile.tif/jpg Output TIFF/JPEG file diff --git a/debian/man/ccxxmake.1 b/debian/man/ccxxmake.1 new file mode 100644 index 0000000..0bd7df7 --- /dev/null +++ b/debian/man/ccxxmake.1 @@ -0,0 +1,177 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH CREATE "1" "September 2014" "Create CCMX or CCSS, Version 1.6.3" "User Commands" +.SH NAME +Create \- Create CCMX or CCSS. +.SH DESCRIPTION +Create CCMX or CCSS, Version 1.6.3 +Author: Graeme W. Gill, licensed under the AGPL Version 3 +Diagnostic: Flag '\-\-' not recognised +usage: ccmxmake [\-options] output.ccmx +.TP +\fB\-v\fR +Verbose mode +.TP +\fB\-S\fR +Create CCSS rather than CCMX +.HP +\fB\-f\fR file1.ti3[,file2.ti3] Create from one or two .ti3 files rather than measure. +.TP +\fB\-display\fR displayname +Choose X11 display name +.TP +\fB\-d\fR n[,m] +Choose the display n from the following list (default 1) +Optionally choose different display m for VideoLUT access +.IP +1 name = ':0.0' +1 = 'Screen 1, Output DVI\-I\-1 at 0, 0, width 1920, height 1080' +.TP +\fB\-dweb[\fR:port] +Display via a web server at port (default 8080) +.TP +\fB\-p\fR +Use telephoto mode (ie. for a projector) (if available) +.TP +\fB\-P\fR ho,vo,ss[,vs] +Position test window and scale it +ho,vi: 0.0 = left/top, 0.5 = center, 1.0 = right/bottom etc. +ss: 0.5 = half, 1.0 = normal, 2.0 = double etc. +.TP +\fB\-F\fR +Fill whole screen with black background +.TP +\fB\-n\fR +Don't set override redirect on test window +.TP +\fB\-N\fR +Disable initial calibration of instrument if possible +.TP +\fB\-H\fR +Use high resolution spectrum mode (if available) +.TP +\fB\-C\fR "command" +Invoke shell "command" each time a color is set +.TP +\fB\-o\fR observ +Choose CIE Observer for CCMX spectrometer data: +1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2 +.TP +\fB\-s\fR steps +Override default patch sequence combination steps (default 1) +.TP +\fB\-W\fR n|h|x +Override serial port flow control: n = none, h = HW, x = Xon/Xoff +.TP +\fB\-D\fR [level] +Print debug diagnostics to stderr +.TP +\fB\-E\fR desciption +Override the default overall description +.TP +\fB\-I\fR displayname +Set display make and model description +.TP +\fB\-T\fR displaytech +Set display technology description (ie. CRT, LCD etc.) +.TP +\fB\-U\fR c +Set UI selection character(s) +.TP +\fB\-Y\fR r|n +Set or override refresh/non\-refresh display type +.TP +\fB\-Y\fR R:rate +Override measured refresh rate with rate Hz +.TP +\fB\-Y\fR A +Use non\-adaptive integration time mode (if available). +.IP +correction.ccmx | calibration.ccss +.IP +File to save result to +.PP +Author: Graeme W. Gill, licensed under the AGPL Version 3 +Diagnostic: Flag '\-\-' not recognised +usage: ccmxmake [\-options] output.ccmx +.TP +\fB\-v\fR +Verbose mode +.TP +\fB\-S\fR +Create CCSS rather than CCMX +.HP +\fB\-f\fR file1.ti3[,file2.ti3] Create from one or two .ti3 files rather than measure. +.TP +\fB\-display\fR displayname +Choose X11 display name +.TP +\fB\-d\fR n[,m] +Choose the display n from the following list (default 1) +Optionally choose different display m for VideoLUT access +.IP +1 name = ':0.0' +1 = 'Screen 1, Output DVI\-I\-1 at 0, 0, width 1920, height 1080' +.TP +\fB\-dweb[\fR:port] +Display via a web server at port (default 8080) +.TP +\fB\-p\fR +Use telephoto mode (ie. for a projector) (if available) +.TP +\fB\-P\fR ho,vo,ss[,vs] +Position test window and scale it +ho,vi: 0.0 = left/top, 0.5 = center, 1.0 = right/bottom etc. +ss: 0.5 = half, 1.0 = normal, 2.0 = double etc. +.TP +\fB\-F\fR +Fill whole screen with black background +.TP +\fB\-n\fR +Don't set override redirect on test window +.TP +\fB\-N\fR +Disable initial calibration of instrument if possible +.TP +\fB\-H\fR +Use high resolution spectrum mode (if available) +.TP +\fB\-C\fR "command" +Invoke shell "command" each time a color is set +.TP +\fB\-o\fR observ +Choose CIE Observer for CCMX spectrometer data: +1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2 +.TP +\fB\-s\fR steps +Override default patch sequence combination steps (default 1) +.TP +\fB\-W\fR n|h|x +Override serial port flow control: n = none, h = HW, x = Xon/Xoff +.TP +\fB\-D\fR [level] +Print debug diagnostics to stderr +.TP +\fB\-E\fR desciption +Override the default overall description +.TP +\fB\-I\fR displayname +Set display make and model description +.TP +\fB\-T\fR displaytech +Set display technology description (ie. CRT, LCD etc.) +.TP +\fB\-U\fR c +Set UI selection character(s) +.TP +\fB\-Y\fR r|n +Set or override refresh/non\-refresh display type +.TP +\fB\-Y\fR R:rate +Override measured refresh rate with rate Hz +.TP +\fB\-Y\fR A +Use non\-adaptive integration time mode (if available). +.IP +correction.ccmx | calibration.ccss +.IP +File to save result to diff --git a/debian/man/chartread.1 b/debian/man/chartread.1 new file mode 100644 index 0000000..1d3d21c --- /dev/null +++ b/debian/man/chartread.1 @@ -0,0 +1,185 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH READ "1" "September 2014" "Read Target Test Chart, Version 1.6.3" "User Commands" +.SH NAME +Read \- Read Target Test Chart. +.SH DESCRIPTION +Read Target Test Chart, Version 1.6.3 +Author: Graeme W. Gill, licensed under the AGPL Version 3 +usage: chartread [\-options] outfile +.TP +\fB\-v\fR +Verbose mode +.TP +\fB\-c\fR listno +Set communication port from the following list (default 1) +.IP +** No ports found ** +.TP +\fB\-t\fR +Use transmission measurement mode +.TP +\fB\-d\fR +Use display measurement mode (white Y relative results) +.TP +\fB\-e\fR +Emissive for transparency on a light box +.TP +\fB\-p\fR +Measure patch by patch rather than strip +.TP +\fB\-x\fR [lx] +Take external values, either L*a*b* (\fB\-xl\fR) or XYZ (\fB\-xx\fR). +.TP +\fB\-n\fR +Don't save spectral information (default saves spectral) +.TP +\fB\-l\fR +Save CIE as D50 L*a*b* rather than XYZ +.TP +\fB\-L\fR +Save CIE as D50 L*a*b* as well as XYZ +.TP +\fB\-r\fR +Resume reading partly read chart +.TP +\fB\-I\fR file.cal +Override calibration info from .ti2 in resulting .ti3 +.TP +\fB\-F\fR filter +Set filter configuration (if aplicable): +.TP +n +None +.TP +p +Polarising filter +.TP +6 +D65 +.TP +u +U.V. Cut +.TP +\fB\-N\fR +Disable initial calibration of instrument if possible +.TP +\fB\-B\fR +Disable auto bi\-directional strip recognition +.TP +\fB\-H\fR +Use high resolution spectrum mode (if available) +.TP +\fB\-X\fR file.ccmx +Apply Colorimeter Correction Matrix +.TP +\fB\-X\fR file.ccss +Use Colorimeter Calibration Spectral Samples for calibration +.TP +\fB\-Q\fR observ +Choose CIE Observer for CCSS instrument: +1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2 +.TP +\fB\-T\fR ratio +Modify strip patch consistency tolerance by ratio +.TP +\fB\-S\fR +Suppress wrong strip & unexpected value warnings +.TP +\fB\-W\fR n|h|x +Override serial port flow control: n = none, h = HW, x = Xon/Xoff +.TP +\fB\-D\fR [level] +Print debug diagnostics to stderr +.TP +outfile +Base name for input[ti2]/output[ti3] file +.PP +Author: Graeme W. Gill, licensed under the AGPL Version 3 +usage: chartread [\-options] outfile +.TP +\fB\-v\fR +Verbose mode +.TP +\fB\-c\fR listno +Set communication port from the following list (default 1) +.IP +** No ports found ** +.TP +\fB\-t\fR +Use transmission measurement mode +.TP +\fB\-d\fR +Use display measurement mode (white Y relative results) +.TP +\fB\-e\fR +Emissive for transparency on a light box +.TP +\fB\-p\fR +Measure patch by patch rather than strip +.TP +\fB\-x\fR [lx] +Take external values, either L*a*b* (\fB\-xl\fR) or XYZ (\fB\-xx\fR). +.TP +\fB\-n\fR +Don't save spectral information (default saves spectral) +.TP +\fB\-l\fR +Save CIE as D50 L*a*b* rather than XYZ +.TP +\fB\-L\fR +Save CIE as D50 L*a*b* as well as XYZ +.TP +\fB\-r\fR +Resume reading partly read chart +.TP +\fB\-I\fR file.cal +Override calibration info from .ti2 in resulting .ti3 +.TP +\fB\-F\fR filter +Set filter configuration (if aplicable): +.TP +n +None +.TP +p +Polarising filter +.TP +6 +D65 +.TP +u +U.V. Cut +.TP +\fB\-N\fR +Disable initial calibration of instrument if possible +.TP +\fB\-B\fR +Disable auto bi\-directional strip recognition +.TP +\fB\-H\fR +Use high resolution spectrum mode (if available) +.TP +\fB\-X\fR file.ccmx +Apply Colorimeter Correction Matrix +.TP +\fB\-X\fR file.ccss +Use Colorimeter Calibration Spectral Samples for calibration +.TP +\fB\-Q\fR observ +Choose CIE Observer for CCSS instrument: +1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2 +.TP +\fB\-T\fR ratio +Modify strip patch consistency tolerance by ratio +.TP +\fB\-S\fR +Suppress wrong strip & unexpected value warnings +.TP +\fB\-W\fR n|h|x +Override serial port flow control: n = none, h = HW, x = Xon/Xoff +.TP +\fB\-D\fR [level] +Print debug diagnostics to stderr +.TP +outfile +Base name for input[ti2]/output[ti3] file diff --git a/debian/man/collink.1 b/debian/man/collink.1 new file mode 100644 index 0000000..5a933dd --- /dev/null +++ b/debian/man/collink.1 @@ -0,0 +1,483 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH LINK "1" "September 2014" "Link ICC profiles, Version 1.6.3" "User Commands" +.SH NAME +Link \- Link ICC profiles. +.SH DESCRIPTION +Link ICC profiles, Version 1.6.3 +Author: Graeme W. Gill, licensed under the AGPL Version 3 +.IP +Diagnostic: Too few arguments, got 1 expect at least 3 +.PP +usage: collink [options] srcprofile dstprofile linkedprofile +.TP +\fB\-v\fR +Verbose +.HP +\fB\-A\fR manufacturer Manufacturer description string +.TP +\fB\-M\fR model +Model description string +.TP +\fB\-D\fR description +Profile Description string (Default "inoutfile") +.TP +\fB\-C\fR copyright +Copyright string +.TP +\fB\-V\fR +Verify existing profile, rather than link +.TP +\fB\-q\fR lmhu +Quality \- Low, Medium (def), High, Ultra +.TP +\fB\-r\fR res +Override clut res. set by \fB\-q\fR +.TP +\fB\-n\fR +Don't preserve device linearization curves in result +.TP +\fB\-f\fR +Special :\- Force neutral colors to be K only output +.TP +\fB\-fk\fR +Special :\- Force K only neutral colors to be K only output +.TP +\fB\-F\fR +Special :\- Force all colors to be K only output +.TP +\fB\-fcmy\fR +Special :\- Force 100% C,M or Y only to stay pure +.TP +\fB\-p\fR absprof +Include abstract profile in link +.TP +\fB\-a\fR file.cal +Apply calibration curves to link output and append linear +.TP +\fB\-H\fR file.cal +Append calibration curves to 3dlut +.TP +\fB\-s\fR +Simple Mode (default) +.TP +\fB\-g\fR [src.gam] +Gamut Mapping Mode [optional source image gamut] +.TP +\fB\-G\fR [src.gam] +Gamut Mapping Mode using inverse outprofile A2B +.IP +Simple Mode Options: +\fB\-i\fR in_intent p = perceptual, r = relative colorimetric, +.IP +s = saturation, a = absolute colorimetric +.TP +\fB\-o\fR out_intent +p = perceptual, r = relative colorimetric, +s = saturation, a = absolute colorimetric +.TP +Gamut Mapping +Mode Options: +.TP +\fB\-i\fR intent +set linking intent from the following choice: +.IP +a \- Absolute Colorimetric (in Jab) [ICC Absolute Colorimetric] +.IP +aw \- Absolute Colorimetric (in Jab) with scaling to fit white point +aa \- Absolute Appearance +.IP +r \- White Point Matched Appearance [ICC Relative Colorimetric] +.IP +la \- Luminance axis matched Appearance +.IP +p \- Perceptual (Preferred) (Default) [ICC Perceptual] +.IP +pa \- Perceptual Apperance +ms \- Saturation +.IP +s \- Enhanced Saturation [ICC Saturation] +.IP +al \- Absolute Colorimetric (Lab) +rl \- White Point Matched Colorimetric (Lab) +.TP +\fB\-w\fR [J,a,b] +Use forced whitepoint hack [optional target point] +.TP +\fB\-c\fR viewcond +set source viewing conditions for CIECAM02, +either an enumerated choice, or a parameter +.TP +\fB\-d\fR viewcond +set destination viewing conditions for CIECAM02, +either an enumerated choice, or parameter:value changes +.IP +pp \- Practical Reflection Print (ISO\-3664 P2) +pe \- Print evaluation environment (CIE 116\-1995) +pc \- Critical print evaluation environment (ISO\-3664 P1) +mt \- Monitor in typical work environment +mb \- Bright monitor in bright work environment +md \- Monitor in darkened work environment +jm \- Projector in dim environment +jd \- Projector in dark environment +tv \- Television/Film Studio +.IP +pcd \- Photo CD \- original scene outdoors +.IP +ob \- Original scene \- Bright Outdoors +cx \- Cut Sheet Transparencies on a viewing box +.TP +s:surround +n = auto, a = average, m = dim, d = dark, +c = transparency (default average) +.TP +w:X:Y:Z +Adapted white point as XYZ (default media white) +.TP +w:x:y +Adapted white point as x, y +.TP +a:adaptation +Adaptation luminance in cd.m^2 (default 50.0) +.TP +b:background +Background % of image luminance (default 20) +.TP +l:imagewhite +Image white in cd.m^2 if surround = auto (default 250) +.TP +f:flare +Flare light % of image luminance (default 0) +.TP +g:glare +Flare light % of ambient (default 1) +.TP +g:X:Y:Z +Flare color as XYZ (default media white, Abs: D50) +.TP +g:x:y +Flare color as x, y +.TP +\fB\-t\fR tlimit +set source total ink limit, 0 \- 400% (estimate by default) +.TP +\fB\-T\fR klimit +set source black ink limit, 0 \- 100% (estimate by default) +.IP +Inverse outprofile A2B Options: +\fB\-k\fR tezhxr CMYK Black generation +.IP +t = transfer K from source to destination, e = retain K of destination B2A table +z = zero K, h = 0.5 K, x = maximum K, r = ramp K (default) +.HP +\fB\-k\fR p stle stpo enpo enle shape +.IP +p = black target generation curve parameters +.HP +\fB\-k\fR q stle0 stpo0 enpo0 enle0 shape0 stle2 stpo2 enpo2 enle2 shape2 +.IP +q = transfer source K to dual curve limits +.TP +\fB\-K\fR parameters +Same as \fB\-k\fR, but target is K locus rather than K value itself +.TP +\fB\-l\fR tlimit +set destination total ink limit, 0 \- 400% (estimate by default) +.TP +\fB\-L\fR klimit +set destination black ink limit, 0 \- 100% (estimate by default) +.TP +\fB\-3\fR flag +Create "3DLut" output file as well as devlink +.TP +e +eeColor .txt file +.TP +m +MadVR .3dlut file +.TP +\fB\-I\fR b +Apply BT.1886\-like mapping with effective gamma 2.2 to input +.TP +\fB\-I\fR b:g.g +Apply BT.1886\-like mapping with effective gamma g.g to input +.TP +\fB\-I\fR B +Apply BT.1886 mapping with technical gamma 2.4 to input +.TP +\fB\-I\fR B:g.g +Apply BT.1886 mapping with technical gamma g.g to input +.TP +\fB\-e\fR flag +Video encode input as: +.TP +\fB\-E\fR flag +Video encode output as: +.TP +n +normal 0..1 full range RGB levels (default) +.TP +t +(16\-235)/255 "TV" RGB levels +.TP +6 +Rec601 YCbCr SD (16\-235,240)/255 "TV" levels +.TP +7 +Rec709 1125/60Hz YCbCr HD (16\-235,240)/255 "TV" levels +.TP +5 +Rec709 1250/50Hz YCbCr HD (16\-235,240)/255 "TV" levels +.TP +2 +Rec2020 YCbCr UHD (16\-235,240)/255 "TV" levels +.TP +C +Rec2020 Constant Luminance YCbCr UHD (16\-235,240)/255 "TV" levels +.TP +x +xvYCC Rec601 YCbCr Rec709 Prims. SD (16\-235,240)/255 "TV" levels +.TP +X +xvYCC Rec709 YCbCr Rec709 Prims. HD (16\-235,240)/255 "TV" levels +.TP +\fB\-P\fR +Create gamut gammap.wrl diagostic +.PP +Author: Graeme W. Gill, licensed under the AGPL Version 3 +.IP +Diagnostic: Too few arguments, got 1 expect at least 3 +.PP +usage: collink [options] srcprofile dstprofile linkedprofile +.TP +\fB\-v\fR +Verbose +.HP +\fB\-A\fR manufacturer Manufacturer description string +.TP +\fB\-M\fR model +Model description string +.TP +\fB\-D\fR description +Profile Description string (Default "inoutfile") +.TP +\fB\-C\fR copyright +Copyright string +.TP +\fB\-V\fR +Verify existing profile, rather than link +.TP +\fB\-q\fR lmhu +Quality \- Low, Medium (def), High, Ultra +.TP +\fB\-r\fR res +Override clut res. set by \fB\-q\fR +.TP +\fB\-n\fR +Don't preserve device linearization curves in result +.TP +\fB\-f\fR +Special :\- Force neutral colors to be K only output +.TP +\fB\-fk\fR +Special :\- Force K only neutral colors to be K only output +.TP +\fB\-F\fR +Special :\- Force all colors to be K only output +.TP +\fB\-fcmy\fR +Special :\- Force 100% C,M or Y only to stay pure +.TP +\fB\-p\fR absprof +Include abstract profile in link +.TP +\fB\-a\fR file.cal +Apply calibration curves to link output and append linear +.TP +\fB\-H\fR file.cal +Append calibration curves to 3dlut +.TP +\fB\-s\fR +Simple Mode (default) +.TP +\fB\-g\fR [src.gam] +Gamut Mapping Mode [optional source image gamut] +.TP +\fB\-G\fR [src.gam] +Gamut Mapping Mode using inverse outprofile A2B +.IP +Simple Mode Options: +\fB\-i\fR in_intent p = perceptual, r = relative colorimetric, +.IP +s = saturation, a = absolute colorimetric +.TP +\fB\-o\fR out_intent +p = perceptual, r = relative colorimetric, +s = saturation, a = absolute colorimetric +.TP +Gamut Mapping +Mode Options: +.TP +\fB\-i\fR intent +set linking intent from the following choice: +.IP +a \- Absolute Colorimetric (in Jab) [ICC Absolute Colorimetric] +.IP +aw \- Absolute Colorimetric (in Jab) with scaling to fit white point +aa \- Absolute Appearance +.IP +r \- White Point Matched Appearance [ICC Relative Colorimetric] +.IP +la \- Luminance axis matched Appearance +.IP +p \- Perceptual (Preferred) (Default) [ICC Perceptual] +.IP +pa \- Perceptual Apperance +ms \- Saturation +.IP +s \- Enhanced Saturation [ICC Saturation] +.IP +al \- Absolute Colorimetric (Lab) +rl \- White Point Matched Colorimetric (Lab) +.TP +\fB\-w\fR [J,a,b] +Use forced whitepoint hack [optional target point] +.TP +\fB\-c\fR viewcond +set source viewing conditions for CIECAM02, +either an enumerated choice, or a parameter +.TP +\fB\-d\fR viewcond +set destination viewing conditions for CIECAM02, +either an enumerated choice, or parameter:value changes +.IP +pp \- Practical Reflection Print (ISO\-3664 P2) +pe \- Print evaluation environment (CIE 116\-1995) +pc \- Critical print evaluation environment (ISO\-3664 P1) +mt \- Monitor in typical work environment +mb \- Bright monitor in bright work environment +md \- Monitor in darkened work environment +jm \- Projector in dim environment +jd \- Projector in dark environment +tv \- Television/Film Studio +.IP +pcd \- Photo CD \- original scene outdoors +.IP +ob \- Original scene \- Bright Outdoors +cx \- Cut Sheet Transparencies on a viewing box +.TP +s:surround +n = auto, a = average, m = dim, d = dark, +c = transparency (default average) +.TP +w:X:Y:Z +Adapted white point as XYZ (default media white) +.TP +w:x:y +Adapted white point as x, y +.TP +a:adaptation +Adaptation luminance in cd.m^2 (default 50.0) +.TP +b:background +Background % of image luminance (default 20) +.TP +l:imagewhite +Image white in cd.m^2 if surround = auto (default 250) +.TP +f:flare +Flare light % of image luminance (default 0) +.TP +g:glare +Flare light % of ambient (default 1) +.TP +g:X:Y:Z +Flare color as XYZ (default media white, Abs: D50) +.TP +g:x:y +Flare color as x, y +.TP +\fB\-t\fR tlimit +set source total ink limit, 0 \- 400% (estimate by default) +.TP +\fB\-T\fR klimit +set source black ink limit, 0 \- 100% (estimate by default) +.IP +Inverse outprofile A2B Options: +\fB\-k\fR tezhxr CMYK Black generation +.IP +t = transfer K from source to destination, e = retain K of destination B2A table +z = zero K, h = 0.5 K, x = maximum K, r = ramp K (default) +.HP +\fB\-k\fR p stle stpo enpo enle shape +.IP +p = black target generation curve parameters +.HP +\fB\-k\fR q stle0 stpo0 enpo0 enle0 shape0 stle2 stpo2 enpo2 enle2 shape2 +.IP +q = transfer source K to dual curve limits +.TP +\fB\-K\fR parameters +Same as \fB\-k\fR, but target is K locus rather than K value itself +.TP +\fB\-l\fR tlimit +set destination total ink limit, 0 \- 400% (estimate by default) +.TP +\fB\-L\fR klimit +set destination black ink limit, 0 \- 100% (estimate by default) +.TP +\fB\-3\fR flag +Create "3DLut" output file as well as devlink +.TP +e +eeColor .txt file +.TP +m +MadVR .3dlut file +.TP +\fB\-I\fR b +Apply BT.1886\-like mapping with effective gamma 2.2 to input +.TP +\fB\-I\fR b:g.g +Apply BT.1886\-like mapping with effective gamma g.g to input +.TP +\fB\-I\fR B +Apply BT.1886 mapping with technical gamma 2.4 to input +.TP +\fB\-I\fR B:g.g +Apply BT.1886 mapping with technical gamma g.g to input +.TP +\fB\-e\fR flag +Video encode input as: +.TP +\fB\-E\fR flag +Video encode output as: +.TP +n +normal 0..1 full range RGB levels (default) +.TP +t +(16\-235)/255 "TV" RGB levels +.TP +6 +Rec601 YCbCr SD (16\-235,240)/255 "TV" levels +.TP +7 +Rec709 1125/60Hz YCbCr HD (16\-235,240)/255 "TV" levels +.TP +5 +Rec709 1250/50Hz YCbCr HD (16\-235,240)/255 "TV" levels +.TP +2 +Rec2020 YCbCr UHD (16\-235,240)/255 "TV" levels +.TP +C +Rec2020 Constant Luminance YCbCr UHD (16\-235,240)/255 "TV" levels +.TP +x +xvYCC Rec601 YCbCr Rec709 Prims. SD (16\-235,240)/255 "TV" levels +.TP +X +xvYCC Rec709 YCbCr Rec709 Prims. HD (16\-235,240)/255 "TV" levels +.TP +\fB\-P\fR +Create gamut gammap.wrl diagostic diff --git a/debian/man/colprof.1 b/debian/man/colprof.1 new file mode 100644 index 0000000..b9feb69 --- /dev/null +++ b/debian/man/colprof.1 @@ -0,0 +1,371 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH CREATE "1" "September 2014" "Create ICC profile, Version 1.6.3" "User Commands" +.SH NAME +Create \- Create ICC profile. +.SH DESCRIPTION +Create ICC profile, Version 1.6.3 +Author: Graeme W. Gill, licensed under the AGPL Version 3 +.IP +Diagnostic: Unknown flag '\-' +.PP +usage: debian/tmp/usr/bin/colprof [\-options] inoutfile +.TP +\fB\-v\fR +Verbose mode +.HP +\fB\-A\fR manufacturer Manufacturer description string +.TP +\fB\-M\fR model +Model description string +.TP +\fB\-D\fR description +Profile Description string (Default "inoutfile") +.TP +\fB\-C\fR copyright +Copyright string +.TP +\fB\-Z\fR tmnb +Attributes: Transparency, Matte, Negative, BlackAndWhite +.TP +\fB\-Z\fR prsa +Default intent: Perceptual, Rel. Colorimetric, Saturation, Abs. Colorimetric +.TP +\fB\-q\fR lmhu +Quality \- Low, Medium (def), High, Ultra +.TP +\fB\-b\fR [lmhun] +Low quality B2A table \- or specific B2A quality or none for input device +.TP +\fB\-ni\fR +Don't create input (Device) shaper curves +.TP +\fB\-np\fR +Don't create input (Device) grid position curves +.TP +\fB\-no\fR +Don't create output (PCS) shaper curves +.TP +\fB\-nc\fR +Don't put the input .ti3 data in the profile +.TP +\fB\-k\fR zhxr +Black value target: z = zero K, +h = 0.5 K, x = max K, r = ramp K (def.) +.HP +\fB\-k\fR p stle stpo enpo enle shape +.IP +stle: K level at White 0.0 \- 1.0 +stpo: start point of transition Wh 0.0 \- Bk 1.0 +enpo: End point of transition Wh 0.0 \- Bk 1.0 +enle: K level at Black 0.0 \- 1.0 +shape: 1.0 = straight, 0.0\-1.0 concave, 1.0\-2.0 convex +.TP +\fB\-K\fR parameters +Same as \fB\-k\fR, but target is K locus rather than K value itself +.TP +\fB\-l\fR tlimit +override total ink limit, 0 \- 400% (default from .ti3) +.TP +\fB\-L\fR klimit +override black ink limit, 0 \- 100% (default from .ti3) +.TP +\fB\-a\fR lxXgsmGS +Algorithm type override +l = Lab cLUT (def.), x = XYZ cLUT, X = display XYZ cLUT + matrix +g = gamma+matrix, s = shaper+matrix, m = matrix only, +G = single gamma+matrix, S = single shaper+matrix +.TP +\fB\-u\fR +If input profile, auto scale WP to allow extrapolation +.TP +\fB\-uc\fR +If input profile, clip cLUT values above WP +.TP +\fB\-U\fR scale +If input profile, scale media white point by scale +.TP +\fB\-R\fR +Restrict white <= 1.0, black and primaries to be +ve +.TP +\fB\-V\fR demphasis +Degree of dark region cLUT grid emphasis 1.0\-4.0 (default 1.00 = none) +.TP +\fB\-f\fR [illum] +Use Fluorescent Whitening Agent compensation [opt. simulated inst. illum.: +.IP +M0, M1, M2, A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp] +.TP +\fB\-i\fR illum +Choose illuminant for computation of CIE XYZ from spectral data & FWA: +.IP +A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp +.TP +\fB\-o\fR observ +Choose CIE Observer for spectral data: +.IP +1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2 +.TP +\fB\-r\fR avgdev +Average deviation of device+instrument readings as a percentage (default 0.50%) +.TP +\fB\-s\fR src.icc +Apply gamut mapping to output profile perceptual B2A table for given source space +.TP +\fB\-S\fR src.icc +Apply gamut mapping to output profile perceptual and saturation B2A table +.TP +\fB\-nP\fR +Use colormetric source gamut to make output profile perceptual table +.TP +\fB\-nS\fR +Use colormetric source gamut to make output profile saturation table +.TP +\fB\-g\fR src.gam +Use source image gamut as well for output profile gamut mapping +.TP +\fB\-p\fR absprof,... +Incorporate abstract profile(s) into output tables +.TP +\fB\-t\fR intent +Override gamut mapping intent for output profile perceptual table: +.TP +\fB\-T\fR intent +Override gamut mapping intent for output profile saturation table: +.IP +a \- Absolute Colorimetric (in Jab) [ICC Absolute Colorimetric] +.IP +aw \- Absolute Colorimetric (in Jab) with scaling to fit white point +aa \- Absolute Appearance +.IP +r \- White Point Matched Appearance [ICC Relative Colorimetric] +.IP +la \- Luminance axis matched Appearance +.IP +p \- Perceptual (Preferred) (Default) [ICC Perceptual] +.IP +pa \- Perceptual Apperance +ms \- Saturation +.IP +s \- Enhanced Saturation [ICC Saturation] +.IP +al \- Absolute Colorimetric (Lab) +rl \- White Point Matched Colorimetric (Lab) +.TP +\fB\-c\fR viewcond +set input viewing conditions for output profile CIECAM02 gamut mapping, +.IP +either an enumerated choice, or a parameter +.TP +\fB\-d\fR viewcond +set output viewing conditions for output profile CIECAM02 gamut mapping +.IP +either an enumerated choice, or a parameter +Also sets out of gamut clipping CAM space. +either an enumerated choice, or a series of parameters:value changes +.IP +pp \- Practical Reflection Print (ISO\-3664 P2) +pe \- Print evaluation environment (CIE 116\-1995) +pc \- Critical print evaluation environment (ISO\-3664 P1) +mt \- Monitor in typical work environment +mb \- Bright monitor in bright work environment +md \- Monitor in darkened work environment +jm \- Projector in dim environment +jd \- Projector in dark environment +tv \- Television/Film Studio +.IP +pcd \- Photo CD \- original scene outdoors +.IP +ob \- Original scene \- Bright Outdoors +cx \- Cut Sheet Transparencies on a viewing box +.TP +\fB\-P\fR +Create gamut gammap_p.wrl and gammap_s.wrl diagostics +.TP +\fB\-O\fR outputfile +Override the default output filename. +.TP +inoutfile +Base name for input.ti3/output.icc file +.PP +Author: Graeme W. Gill, licensed under the AGPL Version 3 +.IP +Diagnostic: Unknown flag '\-' +.PP +usage: debian/tmp/usr/bin/colprof [\-options] inoutfile +.TP +\fB\-v\fR +Verbose mode +.HP +\fB\-A\fR manufacturer Manufacturer description string +.TP +\fB\-M\fR model +Model description string +.TP +\fB\-D\fR description +Profile Description string (Default "inoutfile") +.TP +\fB\-C\fR copyright +Copyright string +.TP +\fB\-Z\fR tmnb +Attributes: Transparency, Matte, Negative, BlackAndWhite +.TP +\fB\-Z\fR prsa +Default intent: Perceptual, Rel. Colorimetric, Saturation, Abs. Colorimetric +.TP +\fB\-q\fR lmhu +Quality \- Low, Medium (def), High, Ultra +.TP +\fB\-b\fR [lmhun] +Low quality B2A table \- or specific B2A quality or none for input device +.TP +\fB\-ni\fR +Don't create input (Device) shaper curves +.TP +\fB\-np\fR +Don't create input (Device) grid position curves +.TP +\fB\-no\fR +Don't create output (PCS) shaper curves +.TP +\fB\-nc\fR +Don't put the input .ti3 data in the profile +.TP +\fB\-k\fR zhxr +Black value target: z = zero K, +h = 0.5 K, x = max K, r = ramp K (def.) +.HP +\fB\-k\fR p stle stpo enpo enle shape +.IP +stle: K level at White 0.0 \- 1.0 +stpo: start point of transition Wh 0.0 \- Bk 1.0 +enpo: End point of transition Wh 0.0 \- Bk 1.0 +enle: K level at Black 0.0 \- 1.0 +shape: 1.0 = straight, 0.0\-1.0 concave, 1.0\-2.0 convex +.TP +\fB\-K\fR parameters +Same as \fB\-k\fR, but target is K locus rather than K value itself +.TP +\fB\-l\fR tlimit +override total ink limit, 0 \- 400% (default from .ti3) +.TP +\fB\-L\fR klimit +override black ink limit, 0 \- 100% (default from .ti3) +.TP +\fB\-a\fR lxXgsmGS +Algorithm type override +l = Lab cLUT (def.), x = XYZ cLUT, X = display XYZ cLUT + matrix +g = gamma+matrix, s = shaper+matrix, m = matrix only, +G = single gamma+matrix, S = single shaper+matrix +.TP +\fB\-u\fR +If input profile, auto scale WP to allow extrapolation +.TP +\fB\-uc\fR +If input profile, clip cLUT values above WP +.TP +\fB\-U\fR scale +If input profile, scale media white point by scale +.TP +\fB\-R\fR +Restrict white <= 1.0, black and primaries to be +ve +.TP +\fB\-V\fR demphasis +Degree of dark region cLUT grid emphasis 1.0\-4.0 (default 1.00 = none) +.TP +\fB\-f\fR [illum] +Use Fluorescent Whitening Agent compensation [opt. simulated inst. illum.: +.IP +M0, M1, M2, A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp] +.TP +\fB\-i\fR illum +Choose illuminant for computation of CIE XYZ from spectral data & FWA: +.IP +A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp +.TP +\fB\-o\fR observ +Choose CIE Observer for spectral data: +.IP +1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2 +.TP +\fB\-r\fR avgdev +Average deviation of device+instrument readings as a percentage (default 0.50%) +.TP +\fB\-s\fR src.icc +Apply gamut mapping to output profile perceptual B2A table for given source space +.TP +\fB\-S\fR src.icc +Apply gamut mapping to output profile perceptual and saturation B2A table +.TP +\fB\-nP\fR +Use colormetric source gamut to make output profile perceptual table +.TP +\fB\-nS\fR +Use colormetric source gamut to make output profile saturation table +.TP +\fB\-g\fR src.gam +Use source image gamut as well for output profile gamut mapping +.TP +\fB\-p\fR absprof,... +Incorporate abstract profile(s) into output tables +.TP +\fB\-t\fR intent +Override gamut mapping intent for output profile perceptual table: +.TP +\fB\-T\fR intent +Override gamut mapping intent for output profile saturation table: +.IP +a \- Absolute Colorimetric (in Jab) [ICC Absolute Colorimetric] +.IP +aw \- Absolute Colorimetric (in Jab) with scaling to fit white point +aa \- Absolute Appearance +.IP +r \- White Point Matched Appearance [ICC Relative Colorimetric] +.IP +la \- Luminance axis matched Appearance +.IP +p \- Perceptual (Preferred) (Default) [ICC Perceptual] +.IP +pa \- Perceptual Apperance +ms \- Saturation +.IP +s \- Enhanced Saturation [ICC Saturation] +.IP +al \- Absolute Colorimetric (Lab) +rl \- White Point Matched Colorimetric (Lab) +.TP +\fB\-c\fR viewcond +set input viewing conditions for output profile CIECAM02 gamut mapping, +.IP +either an enumerated choice, or a parameter +.TP +\fB\-d\fR viewcond +set output viewing conditions for output profile CIECAM02 gamut mapping +.IP +either an enumerated choice, or a parameter +Also sets out of gamut clipping CAM space. +either an enumerated choice, or a series of parameters:value changes +.IP +pp \- Practical Reflection Print (ISO\-3664 P2) +pe \- Print evaluation environment (CIE 116\-1995) +pc \- Critical print evaluation environment (ISO\-3664 P1) +mt \- Monitor in typical work environment +mb \- Bright monitor in bright work environment +md \- Monitor in darkened work environment +jm \- Projector in dim environment +jd \- Projector in dark environment +tv \- Television/Film Studio +.IP +pcd \- Photo CD \- original scene outdoors +.IP +ob \- Original scene \- Bright Outdoors +cx \- Cut Sheet Transparencies on a viewing box +.TP +\fB\-P\fR +Create gamut gammap_p.wrl and gammap_s.wrl diagostics +.TP +\fB\-O\fR outputfile +Override the default output filename. +.TP +inoutfile +Base name for input.ti3/output.icc file diff --git a/debian/man/colverifiy.1 b/debian/man/colverifiy.1 new file mode 100644 index 0000000..e53707b --- /dev/null +++ b/debian/man/colverifiy.1 @@ -0,0 +1,129 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH VERIFY "1" "September 2014" "Verify CIE values, Version 1.6.3" "User Commands" +.SH NAME +Verify \- Verify CIE values. +.SH DESCRIPTION +Verify CIE values, Version 1.6.3 +Author: Graeme W. Gill, licensed under the AGPL Version 3 +usage: verify [\-options] target.ti3 measured.ti3 +.TP +\fB\-v\fR [n] +Verbose mode, n >= 2 print each value +.TP +\fB\-n\fR +Normalise each files reading to its white Y +.TP +\fB\-N\fR +Normalise each files reading to its white XYZ +.TP +\fB\-m\fR +Normalise each files reading to its white X+Y+Z +.TP +\fB\-D\fR +Use D50 100.0 as L*a*b* white reference +.TP +\fB\-c\fR +Show CIE94 delta E values +.TP +\fB\-k\fR +Show CIEDE2000 delta E values +.TP +\fB\-s\fR +Sort patch values by error +.TP +\fB\-w\fR +create VRML vector visualisation (measured.wrl) +.TP +\fB\-W\fR +create VRML marker visualisation (measured.wrl) +.TP +\fB\-x\fR +Use VRML axes +.TP +\fB\-f\fR [illum] +Use Fluorescent Whitening Agent compensation [opt. simulated inst. illum.: +.IP +M0, M1, M2, A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp] +.TP +\fB\-i\fR illum +Choose illuminant for computation of CIE XYZ from spectral data & FWA: +.IP +A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp +.TP +\fB\-o\fR observ +Choose CIE Observer for spectral data: +1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2 +.TP +\fB\-L\fR profile.icc +Skip any first file out of profile gamut patches +.TP +\fB\-X\fR file.ccmx +Apply Colorimeter Correction Matrix to second file +.TP +target.ti3 +Target (reference) PCS or spectral values. +.TP +measured.ti3 +Measured (actual) PCS or spectral values +.PP +Author: Graeme W. Gill, licensed under the AGPL Version 3 +usage: verify [\-options] target.ti3 measured.ti3 +.TP +\fB\-v\fR [n] +Verbose mode, n >= 2 print each value +.TP +\fB\-n\fR +Normalise each files reading to its white Y +.TP +\fB\-N\fR +Normalise each files reading to its white XYZ +.TP +\fB\-m\fR +Normalise each files reading to its white X+Y+Z +.TP +\fB\-D\fR +Use D50 100.0 as L*a*b* white reference +.TP +\fB\-c\fR +Show CIE94 delta E values +.TP +\fB\-k\fR +Show CIEDE2000 delta E values +.TP +\fB\-s\fR +Sort patch values by error +.TP +\fB\-w\fR +create VRML vector visualisation (measured.wrl) +.TP +\fB\-W\fR +create VRML marker visualisation (measured.wrl) +.TP +\fB\-x\fR +Use VRML axes +.TP +\fB\-f\fR [illum] +Use Fluorescent Whitening Agent compensation [opt. simulated inst. illum.: +.IP +M0, M1, M2, A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp] +.TP +\fB\-i\fR illum +Choose illuminant for computation of CIE XYZ from spectral data & FWA: +.IP +A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp +.TP +\fB\-o\fR observ +Choose CIE Observer for spectral data: +1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2 +.TP +\fB\-L\fR profile.icc +Skip any first file out of profile gamut patches +.TP +\fB\-X\fR file.ccmx +Apply Colorimeter Correction Matrix to second file +.TP +target.ti3 +Target (reference) PCS or spectral values. +.TP +measured.ti3 +Measured (actual) PCS or spectral values diff --git a/debian/man/colverify.1 b/debian/man/colverify.1 new file mode 100644 index 0000000..e53707b --- /dev/null +++ b/debian/man/colverify.1 @@ -0,0 +1,129 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH VERIFY "1" "September 2014" "Verify CIE values, Version 1.6.3" "User Commands" +.SH NAME +Verify \- Verify CIE values. +.SH DESCRIPTION +Verify CIE values, Version 1.6.3 +Author: Graeme W. Gill, licensed under the AGPL Version 3 +usage: verify [\-options] target.ti3 measured.ti3 +.TP +\fB\-v\fR [n] +Verbose mode, n >= 2 print each value +.TP +\fB\-n\fR +Normalise each files reading to its white Y +.TP +\fB\-N\fR +Normalise each files reading to its white XYZ +.TP +\fB\-m\fR +Normalise each files reading to its white X+Y+Z +.TP +\fB\-D\fR +Use D50 100.0 as L*a*b* white reference +.TP +\fB\-c\fR +Show CIE94 delta E values +.TP +\fB\-k\fR +Show CIEDE2000 delta E values +.TP +\fB\-s\fR +Sort patch values by error +.TP +\fB\-w\fR +create VRML vector visualisation (measured.wrl) +.TP +\fB\-W\fR +create VRML marker visualisation (measured.wrl) +.TP +\fB\-x\fR +Use VRML axes +.TP +\fB\-f\fR [illum] +Use Fluorescent Whitening Agent compensation [opt. simulated inst. illum.: +.IP +M0, M1, M2, A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp] +.TP +\fB\-i\fR illum +Choose illuminant for computation of CIE XYZ from spectral data & FWA: +.IP +A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp +.TP +\fB\-o\fR observ +Choose CIE Observer for spectral data: +1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2 +.TP +\fB\-L\fR profile.icc +Skip any first file out of profile gamut patches +.TP +\fB\-X\fR file.ccmx +Apply Colorimeter Correction Matrix to second file +.TP +target.ti3 +Target (reference) PCS or spectral values. +.TP +measured.ti3 +Measured (actual) PCS or spectral values +.PP +Author: Graeme W. Gill, licensed under the AGPL Version 3 +usage: verify [\-options] target.ti3 measured.ti3 +.TP +\fB\-v\fR [n] +Verbose mode, n >= 2 print each value +.TP +\fB\-n\fR +Normalise each files reading to its white Y +.TP +\fB\-N\fR +Normalise each files reading to its white XYZ +.TP +\fB\-m\fR +Normalise each files reading to its white X+Y+Z +.TP +\fB\-D\fR +Use D50 100.0 as L*a*b* white reference +.TP +\fB\-c\fR +Show CIE94 delta E values +.TP +\fB\-k\fR +Show CIEDE2000 delta E values +.TP +\fB\-s\fR +Sort patch values by error +.TP +\fB\-w\fR +create VRML vector visualisation (measured.wrl) +.TP +\fB\-W\fR +create VRML marker visualisation (measured.wrl) +.TP +\fB\-x\fR +Use VRML axes +.TP +\fB\-f\fR [illum] +Use Fluorescent Whitening Agent compensation [opt. simulated inst. illum.: +.IP +M0, M1, M2, A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp] +.TP +\fB\-i\fR illum +Choose illuminant for computation of CIE XYZ from spectral data & FWA: +.IP +A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp +.TP +\fB\-o\fR observ +Choose CIE Observer for spectral data: +1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2 +.TP +\fB\-L\fR profile.icc +Skip any first file out of profile gamut patches +.TP +\fB\-X\fR file.ccmx +Apply Colorimeter Correction Matrix to second file +.TP +target.ti3 +Target (reference) PCS or spectral values. +.TP +measured.ti3 +Measured (actual) PCS or spectral values diff --git a/debian/man/dispcal.1 b/debian/man/dispcal.1 new file mode 100644 index 0000000..1570b98 --- /dev/null +++ b/debian/man/dispcal.1 @@ -0,0 +1,307 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH CALIBRATE "1" "September 2014" "Calibrate a Display, Version 1.6.3" "User Commands" +.SH NAME +Calibrate \- Calibrate a Display. +.SH DESCRIPTION +Calibrate a Display, Version 1.6.3 +Author: Graeme W. Gill, licensed under the AGPL Version 3 +Diagnostic: Usage requested +usage: dispcal [options] outfile +.TP +\fB\-v\fR [n] +Verbose mode +.HP +\fB\-display\fR displayname Choose X11 display name +.TP +\fB\-d\fR n[,m] +Choose the display n from the following list (default 1) +Optionally choose different display m for VideoLUT access +.IP +1 = 'Screen 1, Output DVI\-I\-1 at 0, 0, width 1920, height 1080' +.TP +\fB\-dweb[\fR:port] +Display via a web server at port (default 8080) +.TP +\fB\-c\fR listno +Set communication port from the following list (default 1) +.IP +** No ports found ** +.TP +\fB\-r\fR +Report on the calibrated display then exit +.TP +\fB\-R\fR +Report on the uncalibrated display then exit +.TP +\fB\-m\fR +Skip adjustment of the monitor controls +.TP +\fB\-o\fR [profile.icc] +Create fast matrix/shaper profile [different filename to outfile.icc] +.TP +\fB\-O\fR "description" +Fast ICC Profile Description string (Default "outfile") +.TP +\fB\-u\fR +Update previous calibration and (if \fB\-o\fR used) ICC profile VideoLUTs +.TP +\fB\-q\fR [vlmh] +Quality \- Very Low, Low, Medium (def), High +.TP +\fB\-p\fR +Use telephoto mode (ie. for a projector) (if available) +.TP +\fB\-t\fR [temp] +White Daylight locus target, optional target temperaturee in deg. K (deflt.) +.TP +\fB\-T\fR [temp] +White Black Body locus target, optional target temperaturee in deg. K +.TP +\fB\-w\fR x,y +Set the target white point as chromaticity coordinates +.TP +\fB\-b\fR bright +Set the target white brightness in cd/m^2 +.TP +\fB\-g\fR gamma +Set the target response curve advertised gamma (Def. 2.4) +Use "\-gl" for L*a*b* curve +Use "\-gs" for sRGB curve +Use "\-g709" for REC 709 curve (should use \fB\-a\fR as well!) +Use "\-g240" for SMPTE 240M curve (should use \fB\-a\fR as well!) +Use "\-G2.4 \fB\-f0\fR" for BT.1886 +.TP +\fB\-G\fR gamma +Set the target response curve actual technical gamma +.TP +\fB\-f\fR [degree] +Amount of black level accounted for with output offset (default all output offset) +.TP +\fB\-a\fR ambient +Use viewing condition adjustment for ambient in Lux +.TP +\fB\-k\fR factor +Amount to correct black hue, 0 = none, 1 = full, Default = Automatic +.TP +\fB\-A\fR rate +Rate of blending from neutral to black point. Default 4.0 +.TP +\fB\-B\fR blkbright +Set the target black brightness in cd/m^2 +.TP +\fB\-e\fR [n] +Run n verify passes on final curves +.TP +\fB\-z\fR +Run only verify pass on installed calibration curves +.TP +\fB\-P\fR ho,vo,ss[,vs] +Position test window and scale it +ho,vi: 0.0 = left/top, 0.5 = center, 1.0 = right/bottom etc. +ss: 0.5 = half, 1.0 = normal, 2.0 = double etc. +.TP +\fB\-F\fR +Fill whole screen with black background +.TP +\fB\-n\fR +Don't set override redirect on test window +.TP +\fB\-E\fR +Encode the test values for video range 16..235/255 +.TP +\fB\-J\fR +Run instrument calibration first (used rarely) +.TP +\fB\-N\fR +Disable initial calibration of instrument if possible +.TP +\fB\-H\fR +Use high resolution spectrum mode (if available) +.TP +\fB\-X\fR file.ccmx +Apply Colorimeter Correction Matrix +.TP +\fB\-X\fR file.ccss +Use Colorimeter Calibration Spectral Samples for calibration +.TP +\fB\-Q\fR observ +Choose CIE Observer for spectrometer or CCSS colorimeter data: +1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2, 1964_10c +.TP +\fB\-I\fR b|w +Drift compensation, Black: \fB\-Ib\fR, White: \fB\-Iw\fR, Both: \fB\-Ibw\fR +.TP +\fB\-Y\fR R:rate +Override measured refresh rate with rate Hz +.TP +\fB\-Y\fR A +Use non\-adaptive integration time mode (if available). +.TP +\fB\-Y\fR p +Don't wait for the instrument to be placed on the display +.TP +\fB\-C\fR "command" +Invoke shell "command" each time a color is set +.TP +\fB\-M\fR "command" +Invoke shell "command" each time a color is measured +.TP +\fB\-W\fR n|h|x +Override serial port flow control: n = none, h = HW, x = Xon/Xoff +.TP +\fB\-D\fR [level] +Print debug diagnostics to stderr +.TP +inoutfile +Base name for created or updated .cal and .icc output files +.PP +Author: Graeme W. Gill, licensed under the AGPL Version 3 +Diagnostic: Usage requested +usage: dispcal [options] outfile +.TP +\fB\-v\fR [n] +Verbose mode +.HP +\fB\-display\fR displayname Choose X11 display name +.TP +\fB\-d\fR n[,m] +Choose the display n from the following list (default 1) +Optionally choose different display m for VideoLUT access +.IP +1 = 'Screen 1, Output DVI\-I\-1 at 0, 0, width 1920, height 1080' +.TP +\fB\-dweb[\fR:port] +Display via a web server at port (default 8080) +.TP +\fB\-c\fR listno +Set communication port from the following list (default 1) +.IP +** No ports found ** +.TP +\fB\-r\fR +Report on the calibrated display then exit +.TP +\fB\-R\fR +Report on the uncalibrated display then exit +.TP +\fB\-m\fR +Skip adjustment of the monitor controls +.TP +\fB\-o\fR [profile.icc] +Create fast matrix/shaper profile [different filename to outfile.icc] +.TP +\fB\-O\fR "description" +Fast ICC Profile Description string (Default "outfile") +.TP +\fB\-u\fR +Update previous calibration and (if \fB\-o\fR used) ICC profile VideoLUTs +.TP +\fB\-q\fR [vlmh] +Quality \- Very Low, Low, Medium (def), High +.TP +\fB\-p\fR +Use telephoto mode (ie. for a projector) (if available) +.TP +\fB\-t\fR [temp] +White Daylight locus target, optional target temperaturee in deg. K (deflt.) +.TP +\fB\-T\fR [temp] +White Black Body locus target, optional target temperaturee in deg. K +.TP +\fB\-w\fR x,y +Set the target white point as chromaticity coordinates +.TP +\fB\-b\fR bright +Set the target white brightness in cd/m^2 +.TP +\fB\-g\fR gamma +Set the target response curve advertised gamma (Def. 2.4) +Use "\-gl" for L*a*b* curve +Use "\-gs" for sRGB curve +Use "\-g709" for REC 709 curve (should use \fB\-a\fR as well!) +Use "\-g240" for SMPTE 240M curve (should use \fB\-a\fR as well!) +Use "\-G2.4 \fB\-f0\fR" for BT.1886 +.TP +\fB\-G\fR gamma +Set the target response curve actual technical gamma +.TP +\fB\-f\fR [degree] +Amount of black level accounted for with output offset (default all output offset) +.TP +\fB\-a\fR ambient +Use viewing condition adjustment for ambient in Lux +.TP +\fB\-k\fR factor +Amount to correct black hue, 0 = none, 1 = full, Default = Automatic +.TP +\fB\-A\fR rate +Rate of blending from neutral to black point. Default 4.0 +.TP +\fB\-B\fR blkbright +Set the target black brightness in cd/m^2 +.TP +\fB\-e\fR [n] +Run n verify passes on final curves +.TP +\fB\-z\fR +Run only verify pass on installed calibration curves +.TP +\fB\-P\fR ho,vo,ss[,vs] +Position test window and scale it +ho,vi: 0.0 = left/top, 0.5 = center, 1.0 = right/bottom etc. +ss: 0.5 = half, 1.0 = normal, 2.0 = double etc. +.TP +\fB\-F\fR +Fill whole screen with black background +.TP +\fB\-n\fR +Don't set override redirect on test window +.TP +\fB\-E\fR +Encode the test values for video range 16..235/255 +.TP +\fB\-J\fR +Run instrument calibration first (used rarely) +.TP +\fB\-N\fR +Disable initial calibration of instrument if possible +.TP +\fB\-H\fR +Use high resolution spectrum mode (if available) +.TP +\fB\-X\fR file.ccmx +Apply Colorimeter Correction Matrix +.TP +\fB\-X\fR file.ccss +Use Colorimeter Calibration Spectral Samples for calibration +.TP +\fB\-Q\fR observ +Choose CIE Observer for spectrometer or CCSS colorimeter data: +1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2, 1964_10c +.TP +\fB\-I\fR b|w +Drift compensation, Black: \fB\-Ib\fR, White: \fB\-Iw\fR, Both: \fB\-Ibw\fR +.TP +\fB\-Y\fR R:rate +Override measured refresh rate with rate Hz +.TP +\fB\-Y\fR A +Use non\-adaptive integration time mode (if available). +.TP +\fB\-Y\fR p +Don't wait for the instrument to be placed on the display +.TP +\fB\-C\fR "command" +Invoke shell "command" each time a color is set +.TP +\fB\-M\fR "command" +Invoke shell "command" each time a color is measured +.TP +\fB\-W\fR n|h|x +Override serial port flow control: n = none, h = HW, x = Xon/Xoff +.TP +\fB\-D\fR [level] +Print debug diagnostics to stderr +.TP +inoutfile +Base name for created or updated .cal and .icc output files diff --git a/debian/man/dispread.1 b/debian/man/dispread.1 new file mode 100644 index 0000000..dbf1776 --- /dev/null +++ b/debian/man/dispread.1 @@ -0,0 +1,201 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH READ "1" "September 2014" "Read a Display, Version 1.6.3" "User Commands" +.SH NAME +Read \- Read a Display. +.SH DESCRIPTION +Read a Display, Version 1.6.3 +Author: Graeme W. Gill, licensed under the AGPL Version 3 +Diagnostic: Usage requested +usage: dispread [options] outfile +.TP +\fB\-v\fR +Verbose mode +.HP +\fB\-display\fR displayname Choose X11 display name +.TP +\fB\-d\fR n[,m] +Choose the display n from the following list (default 1) +Optionally choose different display m for VideoLUT access +.IP +1 = 'Screen 1, Output DVI\-I\-1 at 0, 0, width 1920, height 1080' +.TP +\fB\-dweb[\fR:port] +Display via a web server at port (default 8080) +.TP +\fB\-c\fR listno +Set communication port from the following list (default 1) +.IP +** No ports found ** +.TP +\fB\-p\fR +Use telephoto mode (ie. for a projector) (if available) +.TP +\fB\-k\fR file.cal +Load calibration file into display while reading +.TP +\fB\-K\fR file.cal +Apply calibration file to test values while reading +.TP +\fB\-s\fR +Save spectral information (default don't save) +.TP +\fB\-P\fR ho,vo,ss[,vs] +Position test window and scale it +ho,vi: 0.0 = left/top, 0.5 = center, 1.0 = right/bottom etc. +ss: 0.5 = half, 1.0 = normal, 2.0 = double etc. +.TP +\fB\-F\fR +Fill whole screen with black background +.TP +\fB\-n\fR +Don't set override redirect on test window +.TP +\fB\-E\fR +Encode the test values for video range 16..235/255 +.TP +\fB\-J\fR +Run instrument calibration first (used rarely) +.TP +\fB\-N\fR +Disable initial calibration of instrument if possible +.TP +\fB\-H\fR +Use high resolution spectrum mode (if available) +.TP +\fB\-w\fR +Disable normalisation of white to Y = 100 +.TP +\fB\-X\fR file.ccmx +Apply Colorimeter Correction Matrix +.TP +\fB\-X\fR file.ccss +Use Colorimeter Calibration Spectral Samples for calibration +.TP +\fB\-Q\fR observ +Choose CIE Observer for spectrometer or CCSS colorimeter data: +1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2, 1964_10c +.TP +\fB\-I\fR b|w +Drift compensation, Black: \fB\-Ib\fR, White: \fB\-Iw\fR, Both: \fB\-Ibw\fR +.TP +\fB\-Y\fR R:rate +Override measured refresh rate with rate Hz +.TP +\fB\-Y\fR A +Use non\-adaptive integration time mode (if available). +.TP +\fB\-Y\fR p +Don't wait for the instrument to be placed on the display +.TP +\fB\-C\fR "command" +Invoke shell "command" each time a color is set +.TP +\fB\-M\fR "command" +Invoke shell "command" each time a color is measured +.TP +\fB\-W\fR n|h|x +Override serial port flow control: n = none, h = HW, x = Xon/Xoff +.TP +\fB\-D\fR [level] +Print debug diagnostics to stderr +.TP +outfile +Base name for input[ti1]/output[ti3] file +.PP +Author: Graeme W. Gill, licensed under the AGPL Version 3 +Diagnostic: Usage requested +usage: dispread [options] outfile +.TP +\fB\-v\fR +Verbose mode +.HP +\fB\-display\fR displayname Choose X11 display name +.TP +\fB\-d\fR n[,m] +Choose the display n from the following list (default 1) +Optionally choose different display m for VideoLUT access +.IP +1 = 'Screen 1, Output DVI\-I\-1 at 0, 0, width 1920, height 1080' +.TP +\fB\-dweb[\fR:port] +Display via a web server at port (default 8080) +.TP +\fB\-c\fR listno +Set communication port from the following list (default 1) +.IP +** No ports found ** +.TP +\fB\-p\fR +Use telephoto mode (ie. for a projector) (if available) +.TP +\fB\-k\fR file.cal +Load calibration file into display while reading +.TP +\fB\-K\fR file.cal +Apply calibration file to test values while reading +.TP +\fB\-s\fR +Save spectral information (default don't save) +.TP +\fB\-P\fR ho,vo,ss[,vs] +Position test window and scale it +ho,vi: 0.0 = left/top, 0.5 = center, 1.0 = right/bottom etc. +ss: 0.5 = half, 1.0 = normal, 2.0 = double etc. +.TP +\fB\-F\fR +Fill whole screen with black background +.TP +\fB\-n\fR +Don't set override redirect on test window +.TP +\fB\-E\fR +Encode the test values for video range 16..235/255 +.TP +\fB\-J\fR +Run instrument calibration first (used rarely) +.TP +\fB\-N\fR +Disable initial calibration of instrument if possible +.TP +\fB\-H\fR +Use high resolution spectrum mode (if available) +.TP +\fB\-w\fR +Disable normalisation of white to Y = 100 +.TP +\fB\-X\fR file.ccmx +Apply Colorimeter Correction Matrix +.TP +\fB\-X\fR file.ccss +Use Colorimeter Calibration Spectral Samples for calibration +.TP +\fB\-Q\fR observ +Choose CIE Observer for spectrometer or CCSS colorimeter data: +1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2, 1964_10c +.TP +\fB\-I\fR b|w +Drift compensation, Black: \fB\-Ib\fR, White: \fB\-Iw\fR, Both: \fB\-Ibw\fR +.TP +\fB\-Y\fR R:rate +Override measured refresh rate with rate Hz +.TP +\fB\-Y\fR A +Use non\-adaptive integration time mode (if available). +.TP +\fB\-Y\fR p +Don't wait for the instrument to be placed on the display +.TP +\fB\-C\fR "command" +Invoke shell "command" each time a color is set +.TP +\fB\-M\fR "command" +Invoke shell "command" each time a color is measured +.TP +\fB\-W\fR n|h|x +Override serial port flow control: n = none, h = HW, x = Xon/Xoff +.TP +\fB\-D\fR [level] +Print debug diagnostics to stderr +.TP +outfile +Base name for input[ti1]/output[ti3] file diff --git a/debian/man/dispwin.1 b/debian/man/dispwin.1 new file mode 100644 index 0000000..9781182 --- /dev/null +++ b/debian/man/dispwin.1 @@ -0,0 +1,157 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH TEST "1" "September 2014" "Test display patch window, Set Video LUTs, Install profiles, Version 1.6.3" "User Commands" +.SH NAME +Test \- Test display patch window, Set Video LUTs, Install profiles. +.SH DESCRIPTION +Test display patch window, Set Video LUTs, Install profiles, Version 1.6.3 +Author: Graeme W. Gill, licensed under the AGPL Version 3 +Diagnostic: Unknown flag '\-\-help' +usage: dispwin [options] [calfile] +.TP +\fB\-v\fR +Verbose mode +.HP +\fB\-display\fR displayname Choose X11 display name +.TP +\fB\-d\fR n[,m] +Choose the display n from the following list (default 1) +Optionally choose different display m for Video LUT access +.IP +1 = 'Screen 1, Output DVI\-I\-1 at 0, 0, width 1920, height 1080' +.TP +\fB\-dweb[\fR:port] +Display via a web server at port (default 8080) +.TP +\fB\-P\fR ho,vo,ss[,vs] +Position test window and scale it +.TP +\fB\-F\fR +Fill whole screen with black background +.TP +\fB\-i\fR +Run forever with random values +.TP +\fB\-G\fR filename +Display RGB colors from CGATS file +.TP +\fB\-C\fR r.rr,g.gg,b.bb +Add this RGB color to list to be displayed +.TP +\fB\-m\fR +Manually cycle through values +.TP +\fB\-f\fR +Test grey ramp fade +.TP +\fB\-r\fR +Test just Video LUT loading & Beeps +.TP +\fB\-n\fR +Test native output (rather than through Video LUT and C.M.) +.TP +\fB\-s\fR filename +Save the currently loaded Video LUT to 'filename' +.TP +\fB\-c\fR +Load a linear display calibration +.TP +\fB\-V\fR +Verify that calfile/profile cal. is currently loaded in LUT +.TP +\fB\-I\fR +Install profile for display and use it's calibration +.TP +\fB\-U\fR +Un\-install profile for display +.TP +\fB\-S\fR d +Specify the install/uninstall scope for OS X [nlu] or X11/Vista [lu] +d is one of: n = network, l = local system, u = user (default) +.TP +\fB\-L\fR +Load installed profiles cal. into Video LUT +.TP +\fB\-X\fR +Run in daemon loader mode for given X11 server +.TP +\fB\-D\fR [level] +Print debug diagnostics to stderr +.TP +calfile +Load calibration (.cal or .icc) into Video LUT +.PP +Author: Graeme W. Gill, licensed under the AGPL Version 3 +Diagnostic: Unknown flag '\-\-version' +usage: dispwin [options] [calfile] +.TP +\fB\-v\fR +Verbose mode +.HP +\fB\-display\fR displayname Choose X11 display name +.TP +\fB\-d\fR n[,m] +Choose the display n from the following list (default 1) +Optionally choose different display m for Video LUT access +.IP +1 = 'Screen 1, Output DVI\-I\-1 at 0, 0, width 1920, height 1080' +.TP +\fB\-dweb[\fR:port] +Display via a web server at port (default 8080) +.TP +\fB\-P\fR ho,vo,ss[,vs] +Position test window and scale it +.TP +\fB\-F\fR +Fill whole screen with black background +.TP +\fB\-i\fR +Run forever with random values +.TP +\fB\-G\fR filename +Display RGB colors from CGATS file +.TP +\fB\-C\fR r.rr,g.gg,b.bb +Add this RGB color to list to be displayed +.TP +\fB\-m\fR +Manually cycle through values +.TP +\fB\-f\fR +Test grey ramp fade +.TP +\fB\-r\fR +Test just Video LUT loading & Beeps +.TP +\fB\-n\fR +Test native output (rather than through Video LUT and C.M.) +.TP +\fB\-s\fR filename +Save the currently loaded Video LUT to 'filename' +.TP +\fB\-c\fR +Load a linear display calibration +.TP +\fB\-V\fR +Verify that calfile/profile cal. is currently loaded in LUT +.TP +\fB\-I\fR +Install profile for display and use it's calibration +.TP +\fB\-U\fR +Un\-install profile for display +.TP +\fB\-S\fR d +Specify the install/uninstall scope for OS X [nlu] or X11/Vista [lu] +d is one of: n = network, l = local system, u = user (default) +.TP +\fB\-L\fR +Load installed profiles cal. into Video LUT +.TP +\fB\-X\fR +Run in daemon loader mode for given X11 server +.TP +\fB\-D\fR [level] +Print debug diagnostics to stderr +.TP +calfile +Load calibration (.cal or .icc) into Video LUT diff --git a/debian/man/extracticc.1 b/debian/man/extracticc.1 new file mode 100644 index 0000000..5bf0a00 --- /dev/null +++ b/debian/man/extracticc.1 @@ -0,0 +1,19 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH EXTRACT "1" "September 2014" "Extract an ICC profile from a TIFF or JPEG file, Version 1.6.3" "User Commands" +.SH NAME +Extract \- Extract an ICC profile from a TIFF file. +.SH DESCRIPTION +Extract an ICC profile from a TIFF or JPEG file, Version 1.6.3 +Author: Graeme W. Gill, licensed under the AGPL Version 3 +Diagnostic: Too few parameters +usage: extracticc [\-v] infile.tif/jpg outfile.icc +.TP +\fB\-v\fR +Verbose +.PP +Author: Graeme W. Gill, licensed under the AGPL Version 3 +Diagnostic: Too few parameters +usage: extracticc [\-v] infile.tif/jpg outfile.icc +.TP +\fB\-v\fR +Verbose diff --git a/debian/man/extractttag.1 b/debian/man/extractttag.1 new file mode 100644 index 0000000..9bc01dc --- /dev/null +++ b/debian/man/extractttag.1 @@ -0,0 +1,31 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH EXTRACT "1" "September 2014" "Extract a text tag from an ICC profile, Version 1.6.3" "User Commands" +.SH NAME +Extract \- Extract a text tag from an ICC profile. +.SH DESCRIPTION +Extract a text tag from an ICC profile, Version 1.6.3 +Author: Graeme W. Gill, licensed under the AGPL Version 3 +Diagnostic: Too few parameters +usage: extractttag [\-v] infile.icc outfile +.TP +\fB\-v\fR +Verbose +.TP +\fB\-t\fR tag +Extract this tag rather than default 'targ' +.TP +\fB\-c\fR +Extract calibration file from 'targ' tag +.PP +Author: Graeme W. Gill, licensed under the AGPL Version 3 +Diagnostic: Too few parameters +usage: extractttag [\-v] infile.icc outfile +.TP +\fB\-v\fR +Verbose +.TP +\fB\-t\fR tag +Extract this tag rather than default 'targ' +.TP +\fB\-c\fR +Extract calibration file from 'targ' tag diff --git a/debian/man/fakeCMY.1 b/debian/man/fakeCMY.1 new file mode 100644 index 0000000..91d02f9 --- /dev/null +++ b/debian/man/fakeCMY.1 @@ -0,0 +1,37 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH CREATE "1" "September 2014" "Create a fake CMY data file from a CMYK profile, Version 1.6.3" "User Commands" +.SH NAME +Create \- Create a fake CMY data file from a CMYK profile. +.SH DESCRIPTION +Create a fake CMY data file from a CMYK profile, Version 1.6.3 +Author: Graeme W. Gill, licensed under the AGPL Version 3 +usage: fakeCMY [option] profile.icm fake.ti3 +Diagnostic: Unknown flag +.TP +\fB\-v\fR +verbose +.TP +\fB\-r\fR res +set surface point resolution (default 3) +.TP +\fB\-l\fR tlimit +set total ink limit, 0 \- 400% (estimate by default) +.TP +\fB\-L\fR klimit +set black ink limit, 0 \- 100% (estimate by default) +.PP +Author: Graeme W. Gill, licensed under the AGPL Version 3 +usage: fakeCMY [option] profile.icm fake.ti3 +Diagnostic: Unknown flag +.TP +\fB\-v\fR +verbose +.TP +\fB\-r\fR res +set surface point resolution (default 3) +.TP +\fB\-l\fR tlimit +set total ink limit, 0 \- 400% (estimate by default) +.TP +\fB\-L\fR klimit +set black ink limit, 0 \- 100% (estimate by default) diff --git a/debian/man/fakeread.1 b/debian/man/fakeread.1 new file mode 100644 index 0000000..337fe45 --- /dev/null +++ b/debian/man/fakeread.1 @@ -0,0 +1,179 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH FAKE "1" "September 2014" "Fake test chart reader - lookup values in ICC/MPP profile, Version 1.6.3" "User Commands" +.SH NAME +Fake \- Fake test chart reader - lookup values in ICC/MPP profile. +.SH DESCRIPTION +Fake test chart reader \- lookup values in ICC/MPP profile, Version 1.6.3 +Author: Graeme W. Gill, licensed under the AGPL Version 3 +.IP +Diagnostic: Too few arguments +.PP +usage: fakeread [\-options] profile.[icc|mpp|ti3] outfile +.TP +\fB\-v\fR [n] +Verbose mode [level] +.TP +\fB\-e\fR flag +Video encode device input to sepration as: +.TP +n +normal 0..1 full range RGB levels (default) +.TP +t +(16\-235)/255 "TV" RGB levels +.TP +6 +Rec601 YCbCr SD (16\-235,240)/255 "TV" levels +.TP +7 +Rec709 1125/60Hz YCbCr HD (16\-235,240)/255 "TV" levels +.TP +5 +Rec709 1250/50Hz YCbCr HD (16\-235,240)/255 "TV" levels +.TP +2 +Rec2020 YCbCr UHD (16\-235,240)/255 "TV" levels +.TP +C +Rec2020 Constant Luminance YCbCr UHD (16\-235,240)/255 "TV" levels +.HP +\fB\-p\fR separation.icc Use device link separation profile on input +.TP +\fB\-E\fR flag +Video decode separation device output. See \fB\-e\fR above +.TP +\fB\-k\fR file.cal +Apply calibration (include in .ti3 output) +.TP +\fB\-i\fR file.cal +Include calibration in .ti3 output, but don't apply it +.TP +\fB\-K\fR file.cal +Apply inverse calibration +.TP +\fB\-r\fR level +Add average random deviation of <level>% to device values (after sep. & cal.) +.TP +\fB\-0\fR pow +Apply power to device chanel 0\-9 +.TP +\fB\-b\fR output.icc +Apply BT.1886\-like mapping with effective gamma 2.2 +.HP +\fB\-b\fR g.g:output.icc Apply BT.1886\-like mapping with effective gamma g.g +.TP +\fB\-B\fR output.icc +Apply BT.1886 mapping with technical gamma 2.4 +.HP +\fB\-B\fR g.g:output.icc Apply BT.1886 mapping with technical gamma g.g +.TP +\fB\-I\fR intent +r = relative colorimetric, a = absolute (default) +.TP +\fB\-A\fR L,a,b +Scale black point to target Lab value +.TP +\fB\-l\fR +Output Lab rather than XYZ +.TP +\fB\-s\fR +Lookup MPP spectral values +.TP +\fB\-R\fR level +Add average random deviation of <level>% to output PCS values +.TP +\fB\-u\fR +Make random deviations have uniform distributions rather than normal +.TP +\fB\-S\fR seed +Set random seed +.IP +profile.[icc|mpp|ti3] ICC, MPP profile or TI3 to use +outfile Base name for input[ti1]/output[ti3] file +.PP +Author: Graeme W. Gill, licensed under the AGPL Version 3 +.IP +Diagnostic: Too few arguments +.PP +usage: fakeread [\-options] profile.[icc|mpp|ti3] outfile +.TP +\fB\-v\fR [n] +Verbose mode [level] +.TP +\fB\-e\fR flag +Video encode device input to sepration as: +.TP +n +normal 0..1 full range RGB levels (default) +.TP +t +(16\-235)/255 "TV" RGB levels +.TP +6 +Rec601 YCbCr SD (16\-235,240)/255 "TV" levels +.TP +7 +Rec709 1125/60Hz YCbCr HD (16\-235,240)/255 "TV" levels +.TP +5 +Rec709 1250/50Hz YCbCr HD (16\-235,240)/255 "TV" levels +.TP +2 +Rec2020 YCbCr UHD (16\-235,240)/255 "TV" levels +.TP +C +Rec2020 Constant Luminance YCbCr UHD (16\-235,240)/255 "TV" levels +.HP +\fB\-p\fR separation.icc Use device link separation profile on input +.TP +\fB\-E\fR flag +Video decode separation device output. See \fB\-e\fR above +.TP +\fB\-k\fR file.cal +Apply calibration (include in .ti3 output) +.TP +\fB\-i\fR file.cal +Include calibration in .ti3 output, but don't apply it +.TP +\fB\-K\fR file.cal +Apply inverse calibration +.TP +\fB\-r\fR level +Add average random deviation of <level>% to device values (after sep. & cal.) +.TP +\fB\-0\fR pow +Apply power to device chanel 0\-9 +.TP +\fB\-b\fR output.icc +Apply BT.1886\-like mapping with effective gamma 2.2 +.HP +\fB\-b\fR g.g:output.icc Apply BT.1886\-like mapping with effective gamma g.g +.TP +\fB\-B\fR output.icc +Apply BT.1886 mapping with technical gamma 2.4 +.HP +\fB\-B\fR g.g:output.icc Apply BT.1886 mapping with technical gamma g.g +.TP +\fB\-I\fR intent +r = relative colorimetric, a = absolute (default) +.TP +\fB\-A\fR L,a,b +Scale black point to target Lab value +.TP +\fB\-l\fR +Output Lab rather than XYZ +.TP +\fB\-s\fR +Lookup MPP spectral values +.TP +\fB\-R\fR level +Add average random deviation of <level>% to output PCS values +.TP +\fB\-u\fR +Make random deviations have uniform distributions rather than normal +.TP +\fB\-S\fR seed +Set random seed +.IP +profile.[icc|mpp|ti3] ICC, MPP profile or TI3 to use +outfile Base name for input[ti1]/output[ti3] file diff --git a/debian/man/greytiff.1 b/debian/man/greytiff.1 new file mode 100644 index 0000000..137686c --- /dev/null +++ b/debian/man/greytiff.1 @@ -0,0 +1,29 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH CONVERT "1" "September 2014" "Convert a TIFF file to monochrome using an ICC device profile, V1.6.3" "User Commands" +.SH NAME +Convert \- Convert a TIFF file to monochrome using an ICC device profile. +.SH DESCRIPTION +Convert a TIFF file to monochrome using an ICC device profile, V1.6.3 +Author: Graeme W. Gill, licensed under the AGPL Version 3 +usage: greytiff [\-v level] profile.icm infile.tif outfile.tif +.TP +\fB\-v\fR +Verbose +.TP +\fB\-p\fR +Use slow precise correction +.TP +\fB\-j\fR +Use CIECAM02 +.PP +Author: Graeme W. Gill, licensed under the AGPL Version 3 +usage: greytiff [\-v level] profile.icm infile.tif outfile.tif +.TP +\fB\-v\fR +Verbose +.TP +\fB\-p\fR +Use slow precise correction +.TP +\fB\-j\fR +Use CIECAM02 diff --git a/debian/man/iccdump.1 b/debian/man/iccdump.1 new file mode 100644 index 0000000..6c75135 --- /dev/null +++ b/debian/man/iccdump.1 @@ -0,0 +1,35 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH DUMP "1" "September 2014" "Dump an ICC file in human readable form, V2.17" "User Commands" +.SH NAME +Dump \- Dump an ICC file in human readable form. +.SH DESCRIPTION +Dump an ICC file in human readable form, V2.17 +Author: Graeme W. Gill +usage: iccdump [\-v level] [\-t tagname] [\-s] infile +.TP +\fB\-v\fR level +Verbose level 1\-3 (default 2) +.TP +\fB\-t\fR tag +Dump this tag only (can be used multiple times) +.TP +\fB\-s\fR +Search for embedded profile +.TP +\fB\-i\fR +Check V4 ID value +.PP +Author: Graeme W. Gill +usage: iccdump [\-v level] [\-t tagname] [\-s] infile +.TP +\fB\-v\fR level +Verbose level 1\-3 (default 2) +.TP +\fB\-t\fR tag +Dump this tag only (can be used multiple times) +.TP +\fB\-s\fR +Search for embedded profile +.TP +\fB\-i\fR +Check V4 ID value diff --git a/debian/man/iccgamut.1 b/debian/man/iccgamut.1 new file mode 100644 index 0000000..b83978a --- /dev/null +++ b/debian/man/iccgamut.1 @@ -0,0 +1,189 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH CREATE "1" "September 2014" "Create Lab/Jab gamut plot Version 1.6.3" "User Commands" +.SH NAME +Create \- Create Lab/Jab gamut plot. +.SH DESCRIPTION +Create Lab/Jab gamut plot Version 1.6.3 +Author: Graeme W. Gill, licensed under the AGPL Version 3 +usage: iccgamut [options] profile +Diagnostic: Unknown flag +.TP +\fB\-v\fR +Verbose +.TP +\fB\-d\fR sres +Surface resolution details 1.0 \- 50.0 +.TP +\fB\-w\fR +emit VRML .wrl file as well as CGATS .gam file +.TP +\fB\-n\fR +Don't add VRML axes or white/black point +.TP +\fB\-k\fR +Add VRML markers for prim. & sec. "cusp" points +.TP +\fB\-f\fR function +f = forward*, b = backwards +.TP +\fB\-i\fR intent +p = perceptual, r = relative colorimetric, +s = saturation, a = absolute (default), d = profile default +.TP +\fB\-p\fR oride +l = Lab_PCS (default), j = CIECAM02 Appearance Jab +.TP +\fB\-o\fR order +n = normal (priority: lut > matrix > monochrome) +r = reverse (priority: monochrome > matrix > lut) +.TP +\fB\-l\fR tlimit +set total ink limit, 0 \- 400% (estimate by default) +.TP +\fB\-L\fR klimit +set black ink limit, 0 \- 100% (estimate by default) +.TP +\fB\-c\fR viewcond +set viewing conditions for CIECAM02, +either an enumerated choice, or a series of parameter:value changes +.IP +pp \- Practical Reflection Print (ISO\-3664 P2) +pe \- Print evaluation environment (CIE 116\-1995) +pc \- Critical print evaluation environment (ISO\-3664 P1) +mt \- Monitor in typical work environment +mb \- Bright monitor in bright work environment +md \- Monitor in darkened work environment +jm \- Projector in dim environment +jd \- Projector in dark environment +tv \- Television/Film Studio +.IP +pcd \- Photo CD \- original scene outdoors +.IP +ob \- Original scene \- Bright Outdoors +cx \- Cut Sheet Transparencies on a viewing box +.TP +s:surround +n = auto, a = average, m = dim, d = dark, +c = transparency (default average) +.TP +w:X:Y:Z +Adapted white point as XYZ (default media white) +.TP +w:x:y +Adapted white point as x, y +.TP +a:adaptation +Adaptation luminance in cd.m^2 (default 50.0) +.TP +b:background +Background % of image luminance (default 20) +.TP +l:imagewhite +Image white in cd.m^2 if surround = auto (default 250) +.TP +f:flare +Flare light % of image luminance (default 0) +.TP +g:glare +Flare light % of ambient (default 1) +.TP +g:X:Y:Z +Flare color as XYZ (default media white, Abs: D50) +.TP +g:x:y +Flare color as x, y +.TP +\fB\-s\fR +Create special cube surface topology plot +.PP +Author: Graeme W. Gill, licensed under the AGPL Version 3 +usage: iccgamut [options] profile +Diagnostic: Unknown flag +.TP +\fB\-v\fR +Verbose +.TP +\fB\-d\fR sres +Surface resolution details 1.0 \- 50.0 +.TP +\fB\-w\fR +emit VRML .wrl file as well as CGATS .gam file +.TP +\fB\-n\fR +Don't add VRML axes or white/black point +.TP +\fB\-k\fR +Add VRML markers for prim. & sec. "cusp" points +.TP +\fB\-f\fR function +f = forward*, b = backwards +.TP +\fB\-i\fR intent +p = perceptual, r = relative colorimetric, +s = saturation, a = absolute (default), d = profile default +.TP +\fB\-p\fR oride +l = Lab_PCS (default), j = CIECAM02 Appearance Jab +.TP +\fB\-o\fR order +n = normal (priority: lut > matrix > monochrome) +r = reverse (priority: monochrome > matrix > lut) +.TP +\fB\-l\fR tlimit +set total ink limit, 0 \- 400% (estimate by default) +.TP +\fB\-L\fR klimit +set black ink limit, 0 \- 100% (estimate by default) +.TP +\fB\-c\fR viewcond +set viewing conditions for CIECAM02, +either an enumerated choice, or a series of parameter:value changes +.IP +pp \- Practical Reflection Print (ISO\-3664 P2) +pe \- Print evaluation environment (CIE 116\-1995) +pc \- Critical print evaluation environment (ISO\-3664 P1) +mt \- Monitor in typical work environment +mb \- Bright monitor in bright work environment +md \- Monitor in darkened work environment +jm \- Projector in dim environment +jd \- Projector in dark environment +tv \- Television/Film Studio +.IP +pcd \- Photo CD \- original scene outdoors +.IP +ob \- Original scene \- Bright Outdoors +cx \- Cut Sheet Transparencies on a viewing box +.TP +s:surround +n = auto, a = average, m = dim, d = dark, +c = transparency (default average) +.TP +w:X:Y:Z +Adapted white point as XYZ (default media white) +.TP +w:x:y +Adapted white point as x, y +.TP +a:adaptation +Adaptation luminance in cd.m^2 (default 50.0) +.TP +b:background +Background % of image luminance (default 20) +.TP +l:imagewhite +Image white in cd.m^2 if surround = auto (default 250) +.TP +f:flare +Flare light % of image luminance (default 0) +.TP +g:glare +Flare light % of ambient (default 1) +.TP +g:X:Y:Z +Flare color as XYZ (default media white, Abs: D50) +.TP +g:x:y +Flare color as x, y +.TP +\fB\-s\fR +Create special cube surface topology plot diff --git a/debian/man/icclu.1 b/debian/man/icclu.1 new file mode 100644 index 0000000..5a2c08f --- /dev/null +++ b/debian/man/icclu.1 @@ -0,0 +1,61 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH TRANSLATE "1" "September 2014" "Translate colors through an ICC profile, V2.17" "User Commands" +.SH NAME +Translate \- Translate colors through an ICC profile. +.SH DESCRIPTION +Translate colors through an ICC profile, V2.17 +Author: Graeme W. Gill +usage: icclu [\-v level] [\-f func] [\-i intent] [\-o order] profile +.TP +\fB\-v\fR level +Verbosity level 0 \- 2 (default = 1) +.TP +\fB\-f\fR function +f = forward, b = backwards, g = gamut, p = preview +.TP +\fB\-i\fR intent +p = perceptual, r = relative colorimetric, +s = saturation, a = absolute +.TP +\fB\-p\fR oride +x = XYZ_PCS, l = Lab_PCS, y = Yxy, +.TP +\fB\-o\fR order +n = normal (priority: lut > matrix > monochrome) +r = reverse (priority: monochrome > matrix > lut) +.TP +\fB\-s\fR scale +Scale device range 0.0 \- scale rather than 0.0 \- 1.0 +.IP +The colors to be translated should be fed into standard input, +one input color per line, white space separated. +A line starting with a # will be ignored. +A line not starting with a number will terminate the program. +.PP +Author: Graeme W. Gill +usage: icclu [\-v level] [\-f func] [\-i intent] [\-o order] profile +.TP +\fB\-v\fR level +Verbosity level 0 \- 2 (default = 1) +.TP +\fB\-f\fR function +f = forward, b = backwards, g = gamut, p = preview +.TP +\fB\-i\fR intent +p = perceptual, r = relative colorimetric, +s = saturation, a = absolute +.TP +\fB\-p\fR oride +x = XYZ_PCS, l = Lab_PCS, y = Yxy, +.TP +\fB\-o\fR order +n = normal (priority: lut > matrix > monochrome) +r = reverse (priority: monochrome > matrix > lut) +.TP +\fB\-s\fR scale +Scale device range 0.0 \- scale rather than 0.0 \- 1.0 +.IP +The colors to be translated should be fed into standard input, +one input color per line, white space separated. +A line starting with a # will be ignored. +A line not starting with a number will terminate the program. diff --git a/debian/man/illumread.1 b/debian/man/illumread.1 new file mode 100644 index 0000000..078ae66 --- /dev/null +++ b/debian/man/illumread.1 @@ -0,0 +1,75 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH MEASURE "1" "September 2014" "Measure an illuminant, Version 1.6.3" "User Commands" +.SH NAME +Measure \- Measure an illuminant. +.SH DESCRIPTION +Measure an illuminant, Version 1.6.3 +Author: Graeme W. Gill, licensed under the AGPL Version 3 +usage: illumread [\-options] output.sp +.TP +\fB\-v\fR +Verbose mode +.TP +\fB\-S\fR +Plot spectrum for each reading +.TP +\fB\-c\fR listno +Choose instrument from the following list (default 1) +.IP +** No ports found ** +.TP +\fB\-N\fR +Disable initial calibration of instrument if possible +.TP +\fB\-H\fR +Use high resolution spectrum mode (if available) +.TP +\fB\-Y\fR r +Set refresh measurement mode +.TP +\fB\-Y\fR R:rate +Override measured refresh rate with rate Hz +.TP +\fB\-W\fR n|h|x +Override serial port flow control: n = none, h = HW, x = Xon/Xoff +.TP +\fB\-D\fR [level] +Print debug diagnostics to stderr +.TP +illuminant.sp +File to save measurement to +.PP +Author: Graeme W. Gill, licensed under the AGPL Version 3 +usage: illumread [\-options] output.sp +.TP +\fB\-v\fR +Verbose mode +.TP +\fB\-S\fR +Plot spectrum for each reading +.TP +\fB\-c\fR listno +Choose instrument from the following list (default 1) +.IP +** No ports found ** +.TP +\fB\-N\fR +Disable initial calibration of instrument if possible +.TP +\fB\-H\fR +Use high resolution spectrum mode (if available) +.TP +\fB\-Y\fR r +Set refresh measurement mode +.TP +\fB\-Y\fR R:rate +Override measured refresh rate with rate Hz +.TP +\fB\-W\fR n|h|x +Override serial port flow control: n = none, h = HW, x = Xon/Xoff +.TP +\fB\-D\fR [level] +Print debug diagnostics to stderr +.TP +illuminant.sp +File to save measurement to diff --git a/debian/man/invprofcheck.1 b/debian/man/invprofcheck.1 new file mode 100644 index 0000000..f61e35e --- /dev/null +++ b/debian/man/invprofcheck.1 @@ -0,0 +1,83 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH CHECK "1" "September 2014" "Check fwd to bwd relative transfer of an ICC file, Version 1.6.3" "User Commands" +.SH NAME +Check \- Check fwd to bwd relative transfer of an ICC file. +.SH DESCRIPTION +Check fwd to bwd relative transfer of an ICC file, Version 1.6.3 +Author: Graeme W. Gill +usage: invprofcheck [\-] profile.icm +.TP +\fB\-v\fR [level] +verbosity level (default 1), 2 to print each DE +.TP +\fB\-l\fR limit +set total ink limit (estimate by default) +.TP +\fB\-L\fR klimit +set black channel ink limit (estimate by default) +.TP +\fB\-h\fR +high res test (27) +.TP +\fB\-u\fR +Ultra high res test (61) +.TP +\fB\-R\fR res +Specific grid resolution +.TP +\fB\-c\fR +Show CIE94 delta E values +.TP +\fB\-k\fR +Show CIEDE2000 delta E values +.TP +\fB\-w\fR +create VRML visualisation (profile.wrl) +.TP +\fB\-x\fR +Use VRML axes +.TP +\fB\-e\fR +Color vectors according to delta E +.TP +profile.icm +Profile to check +.PP +Author: Graeme W. Gill +usage: invprofcheck [\-] profile.icm +.TP +\fB\-v\fR [level] +verbosity level (default 1), 2 to print each DE +.TP +\fB\-l\fR limit +set total ink limit (estimate by default) +.TP +\fB\-L\fR klimit +set black channel ink limit (estimate by default) +.TP +\fB\-h\fR +high res test (27) +.TP +\fB\-u\fR +Ultra high res test (61) +.TP +\fB\-R\fR res +Specific grid resolution +.TP +\fB\-c\fR +Show CIE94 delta E values +.TP +\fB\-k\fR +Show CIEDE2000 delta E values +.TP +\fB\-w\fR +create VRML visualisation (profile.wrl) +.TP +\fB\-x\fR +Use VRML axes +.TP +\fB\-e\fR +Color vectors according to delta E +.TP +profile.icm +Profile to check diff --git a/debian/man/kodak2ti3.1 b/debian/man/kodak2ti3.1 new file mode 100644 index 0000000..78db11d --- /dev/null +++ b/debian/man/kodak2ti3.1 @@ -0,0 +1,41 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH CONVERT "1" "September 2014" "Convert Kodak raw printer profile data to Argyll print data, Version 1.6.3" "User Commands" +.SH NAME +Convert \- Convert Kodak raw printer profile data to Argyll print data. +.SH DESCRIPTION +Convert Kodak raw printer profile data to Argyll print data, Version 1.6.3 +Author: Graeme W. Gill, licensed under the AGPL Version 3 +usage: kodak2ti3 [\-v] [\-l limit] infile outfile +.TP +\fB\-v\fR +Verbose mode +.TP +\fB\-l\fR limit +set ink limit, 0 \- 400% +.TP +\fB\-r\fR filename +Use an alternate 928 patch reference file +.TP +infile +Base name for input.pat file +.TP +outfile +Base name for output.ti3 file +.PP +Author: Graeme W. Gill, licensed under the AGPL Version 3 +usage: kodak2ti3 [\-v] [\-l limit] infile outfile +.TP +\fB\-v\fR +Verbose mode +.TP +\fB\-l\fR limit +set ink limit, 0 \- 400% +.TP +\fB\-r\fR filename +Use an alternate 928 patch reference file +.TP +infile +Base name for input.pat file +.TP +outfile +Base name for output.ti3 file diff --git a/debian/man/mppcheck.1 b/debian/man/mppcheck.1 new file mode 100644 index 0000000..51cfdc7 --- /dev/null +++ b/debian/man/mppcheck.1 @@ -0,0 +1,51 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH CHECK "1" "September 2014" "Check Model Printer Profile, Version 1.6.3" "User Commands" +.SH NAME +Check \- Check Model Printer Profile. +.SH DESCRIPTION +Check Model Printer Profile, Version 1.6.3 +Author: Graeme W. Gill, licensed under the AGPL Version 3 +usage: debian/tmp/usr/bin/mppcheck [\-v] [\-c] [\-s] [\-y] values.ti3 profile.mpp +.TP +\fB\-v\fR +Verbose mode +.TP +\fB\-c\fR +Show CIE94 delta E values +.TP +\fB\-k\fR +Show CIEDE2000 delta E values +.TP +\fB\-s\fR +Check spectral model too +.TP +\fB\-y\fR +Detail each value +.TP +values.ti3 +Test values to check against +.IP +profile.mpp Profile to check +.PP +Author: Graeme W. Gill, licensed under the AGPL Version 3 +usage: debian/tmp/usr/bin/mppcheck [\-v] [\-c] [\-s] [\-y] values.ti3 profile.mpp +.TP +\fB\-v\fR +Verbose mode +.TP +\fB\-c\fR +Show CIE94 delta E values +.TP +\fB\-k\fR +Show CIEDE2000 delta E values +.TP +\fB\-s\fR +Check spectral model too +.TP +\fB\-y\fR +Detail each value +.TP +values.ti3 +Test values to check against +.IP +profile.mpp Profile to check diff --git a/debian/man/mpplu.1 b/debian/man/mpplu.1 new file mode 100644 index 0000000..2f9fdcd --- /dev/null +++ b/debian/man/mpplu.1 @@ -0,0 +1,107 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH TRANSLATE "1" "September 2014" "Translate colors through an MPP profile, V1.00" "User Commands" +.SH NAME +Translate \- Translate colors through an MPP profile. +.SH DESCRIPTION +Translate colors through an MPP profile, V1.00 +Author: Graeme W. Gill +usage: mpplu [\-v] [\-f func] [\-i intent] [\-o order] profile +.TP +\fB\-v\fR +Verbose +.TP +\fB\-f\fR function +f = forward, b = backwards +.TP +\fB\-p\fR oride +x = XYZ_PCS, l = Lab_PCS, y = Yxy, s = spectral, +.TP +\fB\-l\fR limit +override default ink limit, 1 \- N00% +.TP +\fB\-i\fR illum +Choose illuminant for print/transparency spectral data: +A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp +.TP +\fB\-o\fR observ +Choose CIE Observer for spectral data: +1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2 +.TP +\fB\-u\fR +Use Fluorescent Whitening Agent compensation +.TP +\fB\-g\fR +Create gamut output +.TP +\fB\-w\fR +Create gamut VRML as well +.TP +\fB\-n\fR +Don't add VRML axes +.TP +\fB\-a\fR n +Gamut transparency level +.TP +\fB\-d\fR n +Gamut surface detail level +.TP +\fB\-t\fR num +Invoke debugging test code "num" 1..n +1 \- check partial derivative for device input +2 \- create overlap diagnostic VRML gamut surface +.IP +The colors to be translated should be fed into stdin, +one input color per line, white space separated. +A line starting with a # will be ignored. +A line not starting with a number will terminate the program. +.PP +Author: Graeme W. Gill +usage: mpplu [\-v] [\-f func] [\-i intent] [\-o order] profile +.TP +\fB\-v\fR +Verbose +.TP +\fB\-f\fR function +f = forward, b = backwards +.TP +\fB\-p\fR oride +x = XYZ_PCS, l = Lab_PCS, y = Yxy, s = spectral, +.TP +\fB\-l\fR limit +override default ink limit, 1 \- N00% +.TP +\fB\-i\fR illum +Choose illuminant for print/transparency spectral data: +A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp +.TP +\fB\-o\fR observ +Choose CIE Observer for spectral data: +1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2 +.TP +\fB\-u\fR +Use Fluorescent Whitening Agent compensation +.TP +\fB\-g\fR +Create gamut output +.TP +\fB\-w\fR +Create gamut VRML as well +.TP +\fB\-n\fR +Don't add VRML axes +.TP +\fB\-a\fR n +Gamut transparency level +.TP +\fB\-d\fR n +Gamut surface detail level +.TP +\fB\-t\fR num +Invoke debugging test code "num" 1..n +1 \- check partial derivative for device input +2 \- create overlap diagnostic VRML gamut surface +.IP +The colors to be translated should be fed into stdin, +one input color per line, white space separated. +A line starting with a # will be ignored. +A line not starting with a number will terminate the program. diff --git a/debian/man/mppprof.1 b/debian/man/mppprof.1 new file mode 100644 index 0000000..f0c129b --- /dev/null +++ b/debian/man/mppprof.1 @@ -0,0 +1,53 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH CREATE "1" "September 2014" "Create Model Printer Profile, Version 1.6.3" "User Commands" +.SH NAME +Create \- Create Model Printer Profile. +.SH DESCRIPTION +Create Model Printer Profile, Version 1.6.3 +Author: Graeme W. Gill, licensed under the AGPL Version 3 +usage: debian/tmp/usr/bin/mppprof [options] outfile +.HP +\fB\-v\fR [level] Verbose mode +.HP +\fB\-q\fR [lmhus] Quality \- Low, Medium (def), High, Ultra, Simple +.TP +\fB\-l\fR limit +override default ink limit, 1 \- n00% +.TP +\fB\-s\fR +Generate spectral model too +.TP +\fB\-m\fR +Generate ink mixing model +.HP +\fB\-y\fR [level] Verify profile, 2 = read/write verify +.TP +\fB\-L\fR +Output Lab values +.TP +outfile +Base name for input.ti3/output.mpp file +.PP +Author: Graeme W. Gill, licensed under the AGPL Version 3 +usage: debian/tmp/usr/bin/mppprof [options] outfile +.HP +\fB\-v\fR [level] Verbose mode +.HP +\fB\-q\fR [lmhus] Quality \- Low, Medium (def), High, Ultra, Simple +.TP +\fB\-l\fR limit +override default ink limit, 1 \- n00% +.TP +\fB\-s\fR +Generate spectral model too +.TP +\fB\-m\fR +Generate ink mixing model +.HP +\fB\-y\fR [level] Verify profile, 2 = read/write verify +.TP +\fB\-L\fR +Output Lab values +.TP +outfile +Base name for input.ti3/output.mpp file diff --git a/debian/man/oeminst.1 b/debian/man/oeminst.1 new file mode 100644 index 0000000..28de472 --- /dev/null +++ b/debian/man/oeminst.1 @@ -0,0 +1,49 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH INSTALL "1" "September 2014" "Install OEM data files, Version 1.6.3" "User Commands" +.SH NAME +Install \- List information about the FILEs. +.SH DESCRIPTION +Install OEM data files, Version 1.6.3 +Author: Graeme W. Gill, licensed under the GPL Version 2 or later +usage: oeminst [\-options] [infile(s)] +.TP +\fB\-v\fR [level] +Verbose +.TP +\fB\-n\fR +Don't install, show where files would be installed +.TP +\fB\-c\fR +Don't install, save files to current directory +.TP +\fB\-S\fR d +Specify the install scope u = user (def.), l = local system] +.TP +infile +setup.exe CD install file(s) or .dll(s) containing install files +.TP +infile.[edr|ccss|ccmx] +EDR file(s) to translate and install or CCSS or CCMX files to install +If no file is provided, oeminst will look for the install CD. +.PP +Author: Graeme W. Gill, licensed under the GPL Version 2 or later +usage: oeminst [\-options] [infile(s)] +.TP +\fB\-v\fR [level] +Verbose +.TP +\fB\-n\fR +Don't install, show where files would be installed +.TP +\fB\-c\fR +Don't install, save files to current directory +.TP +\fB\-S\fR d +Specify the install scope u = user (def.), l = local system] +.TP +infile +setup.exe CD install file(s) or .dll(s) containing install files +.TP +infile.[edr|ccss|ccmx] +EDR file(s) to translate and install or CCSS or CCMX files to install +If no file is provided, oeminst will look for the install CD. diff --git a/debian/man/printcal.1 b/debian/man/printcal.1 new file mode 100644 index 0000000..5680462 --- /dev/null +++ b/debian/man/printcal.1 @@ -0,0 +1,153 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH CREATE "1" "September 2014" "Create printer calibration, Version 1.6.3" "User Commands" +.SH NAME +Create \- Create printer calibration. +.SH DESCRIPTION +Create printer calibration, Version 1.6.3 +Author: Graeme W. Gill, licensed under the AGPL Version 3 +.IP +Diagnostic: Too few arguments, got 1 expect at least 2 +.PP +usage: debian/tmp/usr/bin/printcal [\-options] [prevcal] inoutfile +.TP +\fB\-v\fR verbosity +Verbose mode +.TP +\fB\-p\fR +Plot graphs. +.TP +\fB\-i\fR +Initial calibration, set targets, create .cal +.TP +\fB\-r\fR +Re\-calibrate against previous .cal and create new .cal +.TP +\fB\-e\fR +Verify against previous .cal +.TP +\fB\-I\fR +Create imitation target from .ti3 and null calibration +.TP +\fB\-d\fR +Go through the motions but don't write any files +.TP +\fB\-s\fR smoothing +Extra curve smoothing (default 1.0) +.HP +\fB\-A\fR manufacturer Set the manufacturer description string +.TP +\fB\-M\fR model +Set the model description string +.TP +\fB\-D\fR description +Set the profile Description string +.TP +\fB\-C\fR copyright +Set the copyright string +.TP +\fB\-x\fR# percent +Set initial maximum device % target (override auto) +.TP +\fB\-m\fR# percent +Set initial dev target to % of auto maximum +.TP +\fB\-n\fR# deltaE +Set initial white minimum deltaE target +.TP +\fB\-t\fR# percent +Set initial 50% transfer curve percentage target +.TP +# = c, r, 0 +First channel +.TP +m, g, 1 +Second channel +.TP +y, b, 2 +Third channel +.TP +k, +3 Fourth channel, etc. +.TP +\fB\-a\fR +Create an Adobe Photoshop .AMP file as well as a .cal +.TP +prevcal +Base name of previous .cal file for recal or verify. +.TP +inoutname +Base name of input .ti3 file, output .cal file +.PP +Author: Graeme W. Gill, licensed under the AGPL Version 3 +.IP +Diagnostic: Too few arguments, got 1 expect at least 2 +.PP +usage: debian/tmp/usr/bin/printcal [\-options] [prevcal] inoutfile +.TP +\fB\-v\fR verbosity +Verbose mode +.TP +\fB\-p\fR +Plot graphs. +.TP +\fB\-i\fR +Initial calibration, set targets, create .cal +.TP +\fB\-r\fR +Re\-calibrate against previous .cal and create new .cal +.TP +\fB\-e\fR +Verify against previous .cal +.TP +\fB\-I\fR +Create imitation target from .ti3 and null calibration +.TP +\fB\-d\fR +Go through the motions but don't write any files +.TP +\fB\-s\fR smoothing +Extra curve smoothing (default 1.0) +.HP +\fB\-A\fR manufacturer Set the manufacturer description string +.TP +\fB\-M\fR model +Set the model description string +.TP +\fB\-D\fR description +Set the profile Description string +.TP +\fB\-C\fR copyright +Set the copyright string +.TP +\fB\-x\fR# percent +Set initial maximum device % target (override auto) +.TP +\fB\-m\fR# percent +Set initial dev target to % of auto maximum +.TP +\fB\-n\fR# deltaE +Set initial white minimum deltaE target +.TP +\fB\-t\fR# percent +Set initial 50% transfer curve percentage target +.TP +# = c, r, 0 +First channel +.TP +m, g, 1 +Second channel +.TP +y, b, 2 +Third channel +.TP +k, +3 Fourth channel, etc. +.TP +\fB\-a\fR +Create an Adobe Photoshop .AMP file as well as a .cal +.TP +prevcal +Base name of previous .cal file for recal or verify. +.TP +inoutname +Base name of input .ti3 file, output .cal file diff --git a/debian/man/printtarg.1 b/debian/man/printtarg.1 new file mode 100644 index 0000000..f8e21d9 --- /dev/null +++ b/debian/man/printtarg.1 @@ -0,0 +1,249 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH GENERATE "1" "September 2014" "Generate Target PostScrip file, Version 1.6.3" "User Commands" +.SH NAME +Generate \- Generate Target PostScrip file. +.SH DESCRIPTION +Generate Target PostScrip file, Version 1.6.3 +Author: Graeme W. Gill, licensed under the AGPL Version 3 +.IP +Diagnostic: Unknown flag +.PP +usage: printtarg [\-v] [\-i instr] [\-r] [\-s] [\-p size] basename +.TP +\fB\-v\fR +Verbose mode +.HP +\fB\-i\fR 20 | 22 | 41 | 51 | SS | i1 | CM Select target instrument (default DTP41) +.IP +20 = DTP20, 22 = DTP22, 41 = DTP41, 51 = DTP51, +SS = SpectroScan, i1 = i1Pro, CM = ColorMunki +.TP +\fB\-h\fR +Use hexagon patches for SS, double density for CM +.TP +\fB\-a\fR scale +Scale patch size and spacers by factor (e.g. 0.857 or 1.5 etc.) +.TP +\fB\-A\fR scale +Scale spacers by additional factor (e.g. 0.857 or 1.5 etc.) +.TP +\fB\-r\fR +Don't randomize patch location +.TP +\fB\-s\fR +Create a scan image recognition (.cht) file +.TP +\fB\-S\fR +Same as \fB\-s\fR, but don't generate wide orientation strip. +.TP +\fB\-c\fR +Force colored spacers +.TP +\fB\-b\fR +Force B&W spacers +.TP +\fB\-n\fR +Force no spacers +.TP +\fB\-f\fR +Create PostScript DeviceN Color fallback +.TP +\fB\-w\fR g|r|s|n +White colorspace encoding DeviceGray (def), DeviceRGB, Separation or DeviceN +.TP +\fB\-k\fR g|c|s|n +Black colorspace encoding DeviceGray (def), DeviceCMYK, Separation or DeviceN +.TP +\fB\-o\fR k|r|n +CMY colorspace encoding DefiveCMYK (def), inverted DeviceRGB or DeviceN +.TP +\fB\-e\fR +Output EPS compatible file +.TP +\fB\-t\fR [res] +Output 8 bit TIFF raster file, optional res DPI (default 100) +.TP +\fB\-T\fR [res] +Output 16 bit TIFF raster file, optional res DPI (default 100) +.TP +\fB\-C\fR +Don't use TIFF compression +.TP +\fB\-N\fR +Use TIFF alpha N channels more than 4 +.TP +\fB\-D\fR +Dither 8 bit TIFF values down from 16 bit +.TP +\fB\-Q\fR nbits +Quantize test values to fit in nbits +.TP +\fB\-R\fR rsnum +Use given random start number +.TP +\fB\-K\fR file.cal +Apply printer calibration to patch values and include in .ti2 +.TP +\fB\-I\fR file.cal +Include calibration in .ti2 (but don't apply it) +.TP +\fB\-x\fR pattern +Use given strip indexing pattern (Default = "A\-Z, A\-Z") +.TP +\fB\-y\fR pattern +Use given patch indexing pattern (Default = "0\-9,@\-9,@\-9;1\-999") +.TP +\fB\-m\fR margin +Set a page margin in mm (default 6.0 mm) +.TP +\fB\-M\fR margin +Set a page margin in mm and include it in TIFF +.TP +\fB\-P\fR +Don't limit strip length +.TP +\fB\-L\fR +Suppress any left paper clip border +.TP +\fB\-U\fR +Suppress CUPS cupsJobTicket: cups\-disable\-cmm in PS & EPS files +.TP +\fB\-p\fR size +Select page size from: +A4 [210.0 x 297.0 mm] +A4R [297.0 x 210.0 mm] +A3 [297.0 x 420.0 mm] (default) +A2 [420.0 x 594.0 mm] +Letter [215.9 x 279.4 mm] +LetterR [279.4 x 215.9 mm] +Legal [215.9 x 355.6 mm] +4x6 [101.6 x 152.4 mm] +11x17 [279.4 x 431.8 mm] +.TP +\fB\-p\fR WWWxHHH +Custom size, WWW mm wide by HHH mm high +.TP +basname +Base name for input(.ti1), output(.ti2) and output(.ps/.eps/.tif) +.PP +Author: Graeme W. Gill, licensed under the AGPL Version 3 +.IP +Diagnostic: Unknown flag +.PP +usage: printtarg [\-v] [\-i instr] [\-r] [\-s] [\-p size] basename +.TP +\fB\-v\fR +Verbose mode +.HP +\fB\-i\fR 20 | 22 | 41 | 51 | SS | i1 | CM Select target instrument (default DTP41) +.IP +20 = DTP20, 22 = DTP22, 41 = DTP41, 51 = DTP51, +SS = SpectroScan, i1 = i1Pro, CM = ColorMunki +.TP +\fB\-h\fR +Use hexagon patches for SS, double density for CM +.TP +\fB\-a\fR scale +Scale patch size and spacers by factor (e.g. 0.857 or 1.5 etc.) +.TP +\fB\-A\fR scale +Scale spacers by additional factor (e.g. 0.857 or 1.5 etc.) +.TP +\fB\-r\fR +Don't randomize patch location +.TP +\fB\-s\fR +Create a scan image recognition (.cht) file +.TP +\fB\-S\fR +Same as \fB\-s\fR, but don't generate wide orientation strip. +.TP +\fB\-c\fR +Force colored spacers +.TP +\fB\-b\fR +Force B&W spacers +.TP +\fB\-n\fR +Force no spacers +.TP +\fB\-f\fR +Create PostScript DeviceN Color fallback +.TP +\fB\-w\fR g|r|s|n +White colorspace encoding DeviceGray (def), DeviceRGB, Separation or DeviceN +.TP +\fB\-k\fR g|c|s|n +Black colorspace encoding DeviceGray (def), DeviceCMYK, Separation or DeviceN +.TP +\fB\-o\fR k|r|n +CMY colorspace encoding DefiveCMYK (def), inverted DeviceRGB or DeviceN +.TP +\fB\-e\fR +Output EPS compatible file +.TP +\fB\-t\fR [res] +Output 8 bit TIFF raster file, optional res DPI (default 100) +.TP +\fB\-T\fR [res] +Output 16 bit TIFF raster file, optional res DPI (default 100) +.TP +\fB\-C\fR +Don't use TIFF compression +.TP +\fB\-N\fR +Use TIFF alpha N channels more than 4 +.TP +\fB\-D\fR +Dither 8 bit TIFF values down from 16 bit +.TP +\fB\-Q\fR nbits +Quantize test values to fit in nbits +.TP +\fB\-R\fR rsnum +Use given random start number +.TP +\fB\-K\fR file.cal +Apply printer calibration to patch values and include in .ti2 +.TP +\fB\-I\fR file.cal +Include calibration in .ti2 (but don't apply it) +.TP +\fB\-x\fR pattern +Use given strip indexing pattern (Default = "A\-Z, A\-Z") +.TP +\fB\-y\fR pattern +Use given patch indexing pattern (Default = "0\-9,@\-9,@\-9;1\-999") +.TP +\fB\-m\fR margin +Set a page margin in mm (default 6.0 mm) +.TP +\fB\-M\fR margin +Set a page margin in mm and include it in TIFF +.TP +\fB\-P\fR +Don't limit strip length +.TP +\fB\-L\fR +Suppress any left paper clip border +.TP +\fB\-U\fR +Suppress CUPS cupsJobTicket: cups\-disable\-cmm in PS & EPS files +.TP +\fB\-p\fR size +Select page size from: +A4 [210.0 x 297.0 mm] +A4R [297.0 x 210.0 mm] +A3 [297.0 x 420.0 mm] (default) +A2 [420.0 x 594.0 mm] +Letter [215.9 x 279.4 mm] +LetterR [279.4 x 215.9 mm] +Legal [215.9 x 355.6 mm] +4x6 [101.6 x 152.4 mm] +11x17 [279.4 x 431.8 mm] +.TP +\fB\-p\fR WWWxHHH +Custom size, WWW mm wide by HHH mm high +.TP +basname +Base name for input(.ti1), output(.ti2) and output(.ps/.eps/.tif) diff --git a/debian/man/profcheck.1 b/debian/man/profcheck.1 new file mode 100644 index 0000000..d290f68 --- /dev/null +++ b/debian/man/profcheck.1 @@ -0,0 +1,115 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH CHECK "1" "September 2014" "Check accuracy of ICC profile, Version 1.6.3" "User Commands" +.SH NAME +Check \- Check accuracy of ICC profile. +.SH DESCRIPTION +Check accuracy of ICC profile, Version 1.6.3 +Author: Graeme W. Gill, licensed under the AGPL Version 3 +usage: profcheck [\-options] data.ti3 iccprofile.icm +.TP +\fB\-v\fR [level] +Verbosity level (default 1), 2 to print each DE +.TP +\fB\-c\fR +Show CIE94 delta E values +.TP +\fB\-k\fR +Show CIEDE2000 delta E values +.TP +\fB\-w\fR +create VRML visualisation (iccprofile.wrl) +.TP +\fB\-x\fR +Use VRML axes +.TP +\fB\-m\fR +Make VRML lines a minimum of 0.5 +.TP +\fB\-e\fR +Color vectors according to delta E +.HP +\fB\-d\fR devval1,deval2,devvalN +.IP +Specify a device value to sort against +.TP +\fB\-p\fR +Sort device value by PCS (Lab) target +.TP +\fB\-f\fR [illum] +Use Fluorescent Whitening Agent compensation [opt. simulated inst. illum.: +.IP +M0, M1, M2, A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp] +.TP +\fB\-i\fR illum +Choose illuminant for computation of CIE XYZ from spectral data & FWA: +.IP +A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp +.TP +\fB\-o\fR observ +Choose CIE Observer for spectral data: +.IP +1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2 +.TP +\fB\-I\fR intent +r = relative colorimetric, a = absolute (default) +.TP +data.ti3 +Test data file +.TP +iccprofile.icm +Profile to check against +.PP +Author: Graeme W. Gill, licensed under the AGPL Version 3 +usage: profcheck [\-options] data.ti3 iccprofile.icm +.TP +\fB\-v\fR [level] +Verbosity level (default 1), 2 to print each DE +.TP +\fB\-c\fR +Show CIE94 delta E values +.TP +\fB\-k\fR +Show CIEDE2000 delta E values +.TP +\fB\-w\fR +create VRML visualisation (iccprofile.wrl) +.TP +\fB\-x\fR +Use VRML axes +.TP +\fB\-m\fR +Make VRML lines a minimum of 0.5 +.TP +\fB\-e\fR +Color vectors according to delta E +.HP +\fB\-d\fR devval1,deval2,devvalN +.IP +Specify a device value to sort against +.TP +\fB\-p\fR +Sort device value by PCS (Lab) target +.TP +\fB\-f\fR [illum] +Use Fluorescent Whitening Agent compensation [opt. simulated inst. illum.: +.IP +M0, M1, M2, A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp] +.TP +\fB\-i\fR illum +Choose illuminant for computation of CIE XYZ from spectral data & FWA: +.IP +A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp +.TP +\fB\-o\fR observ +Choose CIE Observer for spectral data: +.IP +1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2 +.TP +\fB\-I\fR intent +r = relative colorimetric, a = absolute (default) +.TP +data.ti3 +Test data file +.TP +iccprofile.icm +Profile to check against diff --git a/debian/man/refine.1 b/debian/man/refine.1 new file mode 100644 index 0000000..18845db --- /dev/null +++ b/debian/man/refine.1 @@ -0,0 +1,109 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH CREATE "1" "September 2014" "Create abstract correction profile given table of absolute CIE correction values, Version 1.6.3" "User Commands" +.SH NAME +Create \- Create abstract correction profile given table of absolute CIE correction values. +.SH DESCRIPTION +Create abstract correction profile given table of absolute CIE correction values, Version 1.6.3 +Author: Graeme W. Gill, licensed under the AGPL Version 3 +Diagnostic: Too few arguments +usage: refine [\-options] cietarget ciecurrent [outdevicc] [inabs] outabs +.TP +\fB\-v\fR +Verbose +.TP +\fB\-c\fR +Create initial abstract correction profile +.TP +\fB\-g\fR +Don't impose output device gamut limit +.TP +\fB\-r\fR res +Set abstract profile clut resolution (default 33) +.TP +\fB\-d\fR factor +Override default damping factor (default 0.950000, then 0.700000) +.TP +\fB\-R\fR +Aim for white point relative match rather than absolute +.TP +\fB\-f\fR [illum] +Use Fluorescent Whitening Agent compensation [opt. simulated inst. illum.: +.IP +M0, M1, M2, A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp] +.TP +\fB\-i\fR illum +Choose illuminant for computation of CIE XYZ from spectral data & FWA: +.IP +A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp +.TP +\fB\-o\fR observ +Choose CIE Observer for spectral data: +.IP +1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2 +.TP +cietarget +Target CIE or spectral values, CGATS file (e.g. .ti3) +.TP +ciecurrent +Actual CIE or spectral values, CGATS file (e.g. .ti3) +.TP +[outdevicc] +Output device ICC profile to set gamut limit (not used if \fB\-g\fR) +.TP +[inabs] +Previous abstract correction ICC profile (not used if \fB\-c\fR) +.TP +outabs +Created/refined abstract correction ICC profile +.PP +Author: Graeme W. Gill, licensed under the AGPL Version 3 +Diagnostic: Too few arguments +usage: refine [\-options] cietarget ciecurrent [outdevicc] [inabs] outabs +.TP +\fB\-v\fR +Verbose +.TP +\fB\-c\fR +Create initial abstract correction profile +.TP +\fB\-g\fR +Don't impose output device gamut limit +.TP +\fB\-r\fR res +Set abstract profile clut resolution (default 33) +.TP +\fB\-d\fR factor +Override default damping factor (default 0.950000, then 0.700000) +.TP +\fB\-R\fR +Aim for white point relative match rather than absolute +.TP +\fB\-f\fR [illum] +Use Fluorescent Whitening Agent compensation [opt. simulated inst. illum.: +.IP +M0, M1, M2, A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp] +.TP +\fB\-i\fR illum +Choose illuminant for computation of CIE XYZ from spectral data & FWA: +.IP +A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp +.TP +\fB\-o\fR observ +Choose CIE Observer for spectral data: +.IP +1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2 +.TP +cietarget +Target CIE or spectral values, CGATS file (e.g. .ti3) +.TP +ciecurrent +Actual CIE or spectral values, CGATS file (e.g. .ti3) +.TP +[outdevicc] +Output device ICC profile to set gamut limit (not used if \fB\-g\fR) +.TP +[inabs] +Previous abstract correction ICC profile (not used if \fB\-c\fR) +.TP +outabs +Created/refined abstract correction ICC profile diff --git a/debian/man/revfix.1 b/debian/man/revfix.1 new file mode 100644 index 0000000..e741657 --- /dev/null +++ b/debian/man/revfix.1 @@ -0,0 +1,91 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH INVERT "1" "September 2014" "Invert AtoB1 to make BtoA1 for CMYK profiles, Version 1.6.3" "User Commands" +.SH NAME +Invert \- Invert AtoB1 to make BtoA1 for CMYK profiles. +.SH DESCRIPTION +Invert AtoB1 to make BtoA1 for CMYK profiles, Version 1.6.3 +Author: Graeme W. Gill, licensed under the AGPL Version 3 +usage: revfix [\-options] iccin iccout +.TP +\fB\-v\fR +Verbose +.TP +\fB\-0\fR +Process perceptual +.TP +\fB\-1\fR +Process absolute/relative colorimetric +.TP +\fB\-2\fR +Process saturation +.TP +\fB\-r\fR res +Override BtoA1 Clut res +.TP +\fB\-k\fR [ezhxr] +e = same K as existing BtoA table (def) +z = zero, h = 0.5 K, x = max K, r = ramp K +.HP +\fB\-k\fR p stle stpo enle enpo shape +.IP +p = curve parameters +stle: K level at White 0.0 \- 1.0 +stpo: start point of transition Wh 0.0 \- Bk 1.0 +enpo: End point of transition Wh 0.0 \- Bk 1.0 +enle: K level at Black 0.0 \- 1.0 +shape: 1.0 = straight, 0.0\-1.0 concave, 1.0\-2.0 convex +.TP +\fB\-K\fR parameters +Same as \fB\-k\fR, but target is K locus rather than K value itself +.TP +\fB\-l\fR tlimit +set total ink limit, 0 \- 400% (estimate by default) +.TP +\fB\-L\fR klimit +set black ink limit, 0 \- 100% (estimate by default) +.TP +\fB\-p\fR absprof +Include abstract profile in output tables +.PP +Author: Graeme W. Gill, licensed under the AGPL Version 3 +usage: revfix [\-options] iccin iccout +.TP +\fB\-v\fR +Verbose +.TP +\fB\-0\fR +Process perceptual +.TP +\fB\-1\fR +Process absolute/relative colorimetric +.TP +\fB\-2\fR +Process saturation +.TP +\fB\-r\fR res +Override BtoA1 Clut res +.TP +\fB\-k\fR [ezhxr] +e = same K as existing BtoA table (def) +z = zero, h = 0.5 K, x = max K, r = ramp K +.HP +\fB\-k\fR p stle stpo enle enpo shape +.IP +p = curve parameters +stle: K level at White 0.0 \- 1.0 +stpo: start point of transition Wh 0.0 \- Bk 1.0 +enpo: End point of transition Wh 0.0 \- Bk 1.0 +enle: K level at Black 0.0 \- 1.0 +shape: 1.0 = straight, 0.0\-1.0 concave, 1.0\-2.0 convex +.TP +\fB\-K\fR parameters +Same as \fB\-k\fR, but target is K locus rather than K value itself +.TP +\fB\-l\fR tlimit +set total ink limit, 0 \- 400% (estimate by default) +.TP +\fB\-L\fR klimit +set black ink limit, 0 \- 100% (estimate by default) +.TP +\fB\-p\fR absprof +Include abstract profile in output tables diff --git a/debian/man/scanin.1 b/debian/man/scanin.1 new file mode 100644 index 0000000..663c69b --- /dev/null +++ b/debian/man/scanin.1 @@ -0,0 +1,215 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH SCANIN, "1" "September 2014" "Scanin, Version 1.6.3" "User Commands" +.SH NAME +Scanin, \- Scanin. +.SH DESCRIPTION +Scanin, Version 1.6.3 +Author: Graeme W. Gill, licensed under the AGPL Version 3 +.PP +usage: scanin [options] input.tif recogin.cht valin.cie [diag.tif] +.IP +:\- inputs 'input.tif' and outputs scanner 'input.ti3', or +.PP +usage: scanin \fB\-g\fR [options] input.tif recogout.cht [diag.tif] +.IP +:\- outputs file 'recogout.cht', or +.PP +usage: scanin \fB\-o\fR [options] input.tif recogin.cht [diag.tif] +.IP +:\- outputs file 'input.val', or +.PP +usage: scanin \fB\-c\fR [options] input.tif recogin.cht scanprofile.[icc|mpp] pbase [diag.tif] +.IP +:\- inputs pbase.ti2 and outputs printer pbase.ti3, or +.PP +usage: scanin \fB\-r\fR [options] input.tif recogin.cht pbase [diag.tif] +.IP +:\- inputs pbase.ti2+.ti3 and outputs pbase.ti3 +.TP +\fB\-g\fR +Generate a chart reference (.cht) file +.TP +\fB\-o\fR +Output patch values in .val file +.TP +\fB\-c\fR +Use image to measure color to convert printer pbase .ti2 to .ti3 +.TP +\fB\-ca\fR +Same as \fB\-c\fR, but accumulates more values to pbase .ti3 +from subsequent pages +.TP +\fB\-r\fR +Replace device values in pbase .ti2/.ti3 +Default is to create a scanner .ti3 file +.TP +\fB\-F\fR x1,y1,x2,y2,x3,y3,x4,y4 +Don't auto recognize, locate using four fiducual marks +.TP +\fB\-p\fR +Compensate for perspective distortion +.TP +\fB\-a\fR +Recognise chart in normal orientation only (\fB\-A\fR fallback as is) +Default is to recognise all possible chart angles +.TP +\fB\-m\fR +Return true mean (default is robust mean) +.TP +\fB\-G\fR gamma +Approximate gamma encoding of image +.TP +\fB\-v\fR [n] +Verbosity level 0\-9 +.TP +\fB\-d\fR [ihvglLIcrsonap] +Generate diagnostic output (try \fB\-dipn\fR) +.TP +i +diag \- B&W of input image +.TP +h +diag \- Horizontal edge/tick detection +.TP +v +diag \- Vertical edge/tick detection +.TP +g +diag \- Groups detected +.TP +l +diag \- Lines detected +.TP +L +diag \- All lines detected +.TP +I +diag \- lines used to improve fit +.TP +c +diag \- lines perspective corrected +.TP +r +diag \- lines rotated +.TP +s +diag \- diagnostic sample boxes rotated +.TP +o +diag \- sample box outlines +.TP +n +diag \- sample box names +.TP +a +diag \- sample box areas +.TP +p +diag \- pixel areas sampled +.HP +\fB\-O\fR outputfile Override the default output filename & extension. +.PP +Author: Graeme W. Gill, licensed under the AGPL Version 3 +.PP +usage: scanin [options] input.tif recogin.cht valin.cie [diag.tif] +.IP +:\- inputs 'input.tif' and outputs scanner 'input.ti3', or +.PP +usage: scanin \fB\-g\fR [options] input.tif recogout.cht [diag.tif] +.IP +:\- outputs file 'recogout.cht', or +.PP +usage: scanin \fB\-o\fR [options] input.tif recogin.cht [diag.tif] +.IP +:\- outputs file 'input.val', or +.PP +usage: scanin \fB\-c\fR [options] input.tif recogin.cht scanprofile.[icc|mpp] pbase [diag.tif] +.IP +:\- inputs pbase.ti2 and outputs printer pbase.ti3, or +.PP +usage: scanin \fB\-r\fR [options] input.tif recogin.cht pbase [diag.tif] +.IP +:\- inputs pbase.ti2+.ti3 and outputs pbase.ti3 +.TP +\fB\-g\fR +Generate a chart reference (.cht) file +.TP +\fB\-o\fR +Output patch values in .val file +.TP +\fB\-c\fR +Use image to measure color to convert printer pbase .ti2 to .ti3 +.TP +\fB\-ca\fR +Same as \fB\-c\fR, but accumulates more values to pbase .ti3 +from subsequent pages +.TP +\fB\-r\fR +Replace device values in pbase .ti2/.ti3 +Default is to create a scanner .ti3 file +.TP +\fB\-F\fR x1,y1,x2,y2,x3,y3,x4,y4 +Don't auto recognize, locate using four fiducual marks +.TP +\fB\-p\fR +Compensate for perspective distortion +.TP +\fB\-a\fR +Recognise chart in normal orientation only (\fB\-A\fR fallback as is) +Default is to recognise all possible chart angles +.TP +\fB\-m\fR +Return true mean (default is robust mean) +.TP +\fB\-G\fR gamma +Approximate gamma encoding of image +.TP +\fB\-v\fR [n] +Verbosity level 0\-9 +.TP +\fB\-d\fR [ihvglLIcrsonap] +Generate diagnostic output (try \fB\-dipn\fR) +.TP +i +diag \- B&W of input image +.TP +h +diag \- Horizontal edge/tick detection +.TP +v +diag \- Vertical edge/tick detection +.TP +g +diag \- Groups detected +.TP +l +diag \- Lines detected +.TP +L +diag \- All lines detected +.TP +I +diag \- lines used to improve fit +.TP +c +diag \- lines perspective corrected +.TP +r +diag \- lines rotated +.TP +s +diag \- diagnostic sample boxes rotated +.TP +o +diag \- sample box outlines +.TP +n +diag \- sample box names +.TP +a +diag \- sample box areas +.TP +p +diag \- pixel areas sampled +.HP +\fB\-O\fR outputfile Override the default output filename & extension. diff --git a/debian/man/spec2cie.1 b/debian/man/spec2cie.1 new file mode 100644 index 0000000..9bd7068 --- /dev/null +++ b/debian/man/spec2cie.1 @@ -0,0 +1,84 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH CONVERT "1" "September 2014" "Convert spectral .ti3 file, Version 1.6.3" "User Commands" +.SH NAME +Convert \- Convert spectral .ti3 file. +.SH SYNOPSIS +.B spec2cie +[\fIoptions\fR] \fIinput.ti3 output.ti3\fR +.SH DESCRIPTION +Convert spectral .ti3 file, Version 1.6.3 +Author: Gerhard Fuernkranz, licensed under the AGPL Version 3 +.TP +\fB\-v\fR +Verbose mode +.TP +\fB\-I\fR illum +Override actual instrument illuminant in .ti3 file: +.IP +A, C, D50, D50M2, D65, F5, F8, F10 or file.sp +(only used in conjunction with \fB\-f\fR) +.TP +\fB\-f\fR [illum] +Use Fluorescent Whitening Agent compensation [simulated inst. illum.: +.IP +M0, M1, M2, A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp] +.TP +\fB\-i\fR illum +Choose illuminant for computation of CIE XYZ from spectral data & FWA: +A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp +.TP +\fB\-o\fR observ +Choose CIE Observer for spectral data: +.IP +1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2 +.TP +\fB\-n\fR +Don't output spectral values +.TP +\fB\-p\fR +Plot each values spectrum +.TP +input.ti3 +Measurement file +.TP +output.ti3 +Converted measurement file +.PP +Author: Gerhard Fuernkranz, licensed under the AGPL Version 3 +.PP +Usage: spec2cie [options] input.ti3 output.ti3 +.TP +\fB\-v\fR +Verbose mode +.TP +\fB\-I\fR illum +Override actual instrument illuminant in .ti3 file: +.IP +A, C, D50, D50M2, D65, F5, F8, F10 or file.sp +(only used in conjunction with \fB\-f\fR) +.TP +\fB\-f\fR [illum] +Use Fluorescent Whitening Agent compensation [simulated inst. illum.: +.IP +M0, M1, M2, A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp] +.TP +\fB\-i\fR illum +Choose illuminant for computation of CIE XYZ from spectral data & FWA: +A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp +.TP +\fB\-o\fR observ +Choose CIE Observer for spectral data: +.IP +1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2 +.TP +\fB\-n\fR +Don't output spectral values +.TP +\fB\-p\fR +Plot each values spectrum +.TP +input.ti3 +Measurement file +.TP +output.ti3 +Converted measurement file diff --git a/debian/man/specplot.1 b/debian/man/specplot.1 new file mode 100644 index 0000000..b794adc --- /dev/null +++ b/debian/man/specplot.1 @@ -0,0 +1,49 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH PLOT "1" "September 2014" "Plot spectrum and calculate CCT and VCT" "User Commands" +.SH NAME +Plot \- Plot spectrum and calculate CCT and VCT. +.SH DESCRIPTION +Plot spectrum and calculate CCT and VCT +Author: Graeme W. Gill +usage: specplot [infile.sp] +.TP +\fB\-v\fR +verbose +.TP +\fB\-c\fR +combine multiple files into one plot +.TP +\fB\-z\fR +don't make range cover zero +.TP +\fB\-u\fR level +plot effect of adding estimated UV level +.TP +\fB\-U\fR +plot effect of adding range of estimated UV level +.TP +[infile.sp ...] +spectrum files to plot +default is all built in illuminants +.PP +Author: Graeme W. Gill +usage: specplot [infile.sp] +.TP +\fB\-v\fR +verbose +.TP +\fB\-c\fR +combine multiple files into one plot +.TP +\fB\-z\fR +don't make range cover zero +.TP +\fB\-u\fR level +plot effect of adding estimated UV level +.TP +\fB\-U\fR +plot effect of adding range of estimated UV level +.TP +[infile.sp ...] +spectrum files to plot +default is all built in illuminants diff --git a/debian/man/splitti3.1 b/debian/man/splitti3.1 new file mode 100644 index 0000000..f08b866 --- /dev/null +++ b/debian/man/splitti3.1 @@ -0,0 +1,59 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH SPLIT "1" "September 2014" "Split a .ti3 into two, Version 1.6.3" "User Commands" +.SH NAME +Split \- Split a .ti3 into two. +.SH DESCRIPTION +Split a .ti3 into two, Version 1.6.3 +Author: Graeme W. Gill, licensed under the AGPL Version 3 +usage: splitcgats [\-options] input.ti3 output1.ti3 output2.ti3 +.TP +\fB\-v\fR +Verbose \- print each patch value +.TP +\fB\-n\fR no +Put no sets in first file, and balance in second file. +.TP +\fB\-p\fR percent +Put percent% sets in first file, and balance in second file. (def. 50%) +.TP +\fB\-w\fR +Put white patches in both files. +.TP +\fB\-r\fR seed +Use given random seed. +.TP +input.ti3 +File to be split up. +.TP +output1.ti3 +First output file +.TP +output2.ti3 +Second output file +.PP +Author: Graeme W. Gill, licensed under the AGPL Version 3 +usage: splitcgats [\-options] input.ti3 output1.ti3 output2.ti3 +.TP +\fB\-v\fR +Verbose \- print each patch value +.TP +\fB\-n\fR no +Put no sets in first file, and balance in second file. +.TP +\fB\-p\fR percent +Put percent% sets in first file, and balance in second file. (def. 50%) +.TP +\fB\-w\fR +Put white patches in both files. +.TP +\fB\-r\fR seed +Use given random seed. +.TP +input.ti3 +File to be split up. +.TP +output1.ti3 +First output file +.TP +output2.ti3 +Second output file diff --git a/debian/man/spotread.1 b/debian/man/spotread.1 new file mode 100644 index 0000000..fea84c6 --- /dev/null +++ b/debian/man/spotread.1 @@ -0,0 +1,241 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH MEASURE "1" "September 2014" "Measure spot values, Version 1.6.3" "User Commands" +.SH NAME +Measure \- Read Print Spot values. +.SH DESCRIPTION +Measure spot values, Version 1.6.3 +Author: Graeme W. Gill, licensed under the GPL Version 2 or later +Diagnostic: Flag \fB\-\-\fR not recognised +usage: spotread [\-options] [logfile] +.TP +\fB\-v\fR +Verbose mode +.TP +\fB\-s\fR +Print spectrum for each reading +.TP +\fB\-S\fR +Plot spectrum for each reading +.TP +\fB\-c\fR listno +Set communication port from the following list (default 1) +.IP +** No ports found ** +.TP +\fB\-t\fR +Use transmission measurement mode +.TP +\fB\-e\fR +Use emissive measurement mode (absolute results) +.TP +\fB\-eb\fR +Use display white brightness relative measurement mode +.TP +\fB\-ew\fR +Use display white point relative chromatically adjusted mode +.TP +\fB\-p\fR +Use telephoto measurement mode (absolute results) +.TP +\fB\-pb\fR +Use projector white brightness relative measurement mode +.TP +\fB\-pw\fR +Use projector white point relative chromatically adjusted mode +.TP +\fB\-a\fR +Use ambient measurement mode (absolute results) +.TP +\fB\-f\fR +Use ambient flash measurement mode (absolute results) +.TP +\fB\-I\fR illum +Set simulated instrument illumination using FWA (def \fB\-i\fR illum): +M0, M1, M2, A, C, D50, D50M2, D65, F5, F8, F10 or file.sp] +.TP +\fB\-i\fR illum +Choose illuminant for computation of CIE XYZ from spectral data & FWA: +A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp +.TP +\fB\-Q\fR observ +Choose CIE Observer for spectral data or CCSS instrument: +1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2 +(Choose FWA during operation) +.TP +\fB\-F\fR filter +Set filter configuration (if aplicable): +.TP +n +None +.TP +p +Polarising filter +.TP +6 +D65 +.TP +u +U.V. Cut +.TP +\fB\-E\fR extrafilterfile +Apply extra filter compensation file +.TP +\fB\-x\fR +Display Yxy instead of Lab +.TP +\fB\-h\fR +Display LCh instead of Lab +.TP +\fB\-V\fR +Show running average and std. devation from ref. +.TP +\fB\-T\fR +Display correlated color temperatures and CRI +.TP +\fB\-N\fR +Disable auto calibration of instrument +.TP +\fB\-H\fR +Start in high resolution spectrum mode (if available) +.TP +\fB\-X\fR file.ccmx +Apply Colorimeter Correction Matrix +.TP +\fB\-X\fR file.ccss +Use Colorimeter Calibration Spectral Samples for calibration +.TP +\fB\-Y\fR r|n +Override refresh, non\-refresh display mode +.TP +\fB\-Y\fR R:rate +Override measured refresh rate with rate Hz +.TP +\fB\-Y\fR A +Use non\-adaptive integration time mode (if available). +.TP +\fB\-W\fR n|h|x +Override serial port flow control: n = none, h = HW, x = Xon/Xoff +.TP +\fB\-D\fR [level] +Print debug diagnostics to stderr +.TP +logfile +Optional file to save reading results as text +.PP +Author: Graeme W. Gill, licensed under the GPL Version 2 or later +Diagnostic: Flag \fB\-\-\fR not recognised +usage: spotread [\-options] [logfile] +.TP +\fB\-v\fR +Verbose mode +.TP +\fB\-s\fR +Print spectrum for each reading +.TP +\fB\-S\fR +Plot spectrum for each reading +.TP +\fB\-c\fR listno +Set communication port from the following list (default 1) +.IP +** No ports found ** +.TP +\fB\-t\fR +Use transmission measurement mode +.TP +\fB\-e\fR +Use emissive measurement mode (absolute results) +.TP +\fB\-eb\fR +Use display white brightness relative measurement mode +.TP +\fB\-ew\fR +Use display white point relative chromatically adjusted mode +.TP +\fB\-p\fR +Use telephoto measurement mode (absolute results) +.TP +\fB\-pb\fR +Use projector white brightness relative measurement mode +.TP +\fB\-pw\fR +Use projector white point relative chromatically adjusted mode +.TP +\fB\-a\fR +Use ambient measurement mode (absolute results) +.TP +\fB\-f\fR +Use ambient flash measurement mode (absolute results) +.TP +\fB\-I\fR illum +Set simulated instrument illumination using FWA (def \fB\-i\fR illum): +M0, M1, M2, A, C, D50, D50M2, D65, F5, F8, F10 or file.sp] +.TP +\fB\-i\fR illum +Choose illuminant for computation of CIE XYZ from spectral data & FWA: +A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp +.TP +\fB\-Q\fR observ +Choose CIE Observer for spectral data or CCSS instrument: +1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2 +(Choose FWA during operation) +.TP +\fB\-F\fR filter +Set filter configuration (if aplicable): +.TP +n +None +.TP +p +Polarising filter +.TP +6 +D65 +.TP +u +U.V. Cut +.TP +\fB\-E\fR extrafilterfile +Apply extra filter compensation file +.TP +\fB\-x\fR +Display Yxy instead of Lab +.TP +\fB\-h\fR +Display LCh instead of Lab +.TP +\fB\-V\fR +Show running average and std. devation from ref. +.TP +\fB\-T\fR +Display correlated color temperatures and CRI +.TP +\fB\-N\fR +Disable auto calibration of instrument +.TP +\fB\-H\fR +Start in high resolution spectrum mode (if available) +.TP +\fB\-X\fR file.ccmx +Apply Colorimeter Correction Matrix +.TP +\fB\-X\fR file.ccss +Use Colorimeter Calibration Spectral Samples for calibration +.TP +\fB\-Y\fR r|n +Override refresh, non\-refresh display mode +.TP +\fB\-Y\fR R:rate +Override measured refresh rate with rate Hz +.TP +\fB\-Y\fR A +Use non\-adaptive integration time mode (if available). +.TP +\fB\-W\fR n|h|x +Override serial port flow control: n = none, h = HW, x = Xon/Xoff +.TP +\fB\-D\fR [level] +Print debug diagnostics to stderr +.TP +logfile +Optional file to save reading results as text diff --git a/debian/man/synthcal.1 b/debian/man/synthcal.1 new file mode 100644 index 0000000..d63ef55 --- /dev/null +++ b/debian/man/synthcal.1 @@ -0,0 +1,87 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH CREATE "1" "September 2014" "Create a synthetic calibration file, Version 1.6.3" "User Commands" +.SH NAME +Create \- Create a synthetic calibration file. +.SH DESCRIPTION +Create a synthetic calibration file, Version 1.6.3 +Author: Graeme W. Gill, licensed under the AGPL Version 3 +usage: synthcal [\-options] outfile +.TP +\fB\-t\fR N +i = input, o = output, d = display (default) +.TP +\fB\-d\fR col_comb +choose colorant combination from the following (default 3): +0: Print grey +1: Video grey +2: Print RGB +3: Video RGB +4: CMYK +5: CMY +6: CMYK + Light CM +7: CMYK + Light CMK +8: CMYK + Red + Blue +9: CMYK + Orange + Green +10: CMYK + Light CMK + Light Light K +11: CMYK + Orange + Green + Light CM +12: CMYK + Light CM + Medium CM +.TP +\fB\-D\fR colorant +Add or delete colorant from combination: +(Use \-?? to list known colorants) +.TP +\fB\-o\fR o1,o2,o3, +Set non\-linear curve offset (default 0.0) +.TP +\fB\-s\fR s1,s2,s3, +Set non\-linear curve scale (default 1.0) +.TP +\fB\-p\fR p1,p2,p3, +Set non\-linear curve powers (default 1.0) +.TP +\fB\-E\fR description +Set the profile dEscription string +.TP +outfile +Base name for output .cal file +.PP +Author: Graeme W. Gill, licensed under the AGPL Version 3 +usage: synthcal [\-options] outfile +.TP +\fB\-t\fR N +i = input, o = output, d = display (default) +.TP +\fB\-d\fR col_comb +choose colorant combination from the following (default 3): +0: Print grey +1: Video grey +2: Print RGB +3: Video RGB +4: CMYK +5: CMY +6: CMYK + Light CM +7: CMYK + Light CMK +8: CMYK + Red + Blue +9: CMYK + Orange + Green +10: CMYK + Light CMK + Light Light K +11: CMYK + Orange + Green + Light CM +12: CMYK + Light CM + Medium CM +.TP +\fB\-D\fR colorant +Add or delete colorant from combination: +(Use \-?? to list known colorants) +.TP +\fB\-o\fR o1,o2,o3, +Set non\-linear curve offset (default 0.0) +.TP +\fB\-s\fR s1,s2,s3, +Set non\-linear curve scale (default 1.0) +.TP +\fB\-p\fR p1,p2,p3, +Set non\-linear curve powers (default 1.0) +.TP +\fB\-E\fR description +Set the profile dEscription string +.TP +outfile +Base name for output .cal file diff --git a/debian/man/synthread.1 b/debian/man/synthread.1 new file mode 100644 index 0000000..444071e --- /dev/null +++ b/debian/man/synthread.1 @@ -0,0 +1,85 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH SYNTHETIC "1" "September 2014" "Synthetic device model test chart reader - Version 1.6.3" "User Commands" +.SH NAME +Synthetic \- Synthetic device model test chart reader. +.SH DESCRIPTION +Synthetic device model test chart reader \- Version 1.6.3 +Author: Graeme W. Gill, licensed under the AGPL Version 3 +Error 'Unrecognised flag' +usage: synthread [\-v] [\-s] [separation.icm] profile.[icc|mpp|ti3] outfile +.TP +\fB\-v\fR +Verbose mode +.TP +\fB\-p\fR +Use separation profile +.TP +\fB\-l\fR +Construct and output in Lab rather than XYZ +.TP +\fB\-i\fR p1,p2,p3, +Set input channel curve powers (default 1.0) +.TP +\fB\-k\fR x1:y1,x2:y2,x3:y2 +Set input channel inflection points (default 0.5,0.5) +.TP +\fB\-o\fR p1,p2,p3, +Set output channel curve powers (default 1.0) +.TP +\fB\-r\fR level +Add average random deviation of <level>% to input device values (after sep.) +.TP +\fB\-R\fR level +Add average random deviation of <level>% to output PCS values +.TP +\fB\-u\fR +Make random deviations have uniform distributions rather than normal +.TP +\fB\-b\fR L,a,b +Scale black point to target Lab value +.TP +[separation.icm] +Device link separation profile +.IP +profile.[icc|mpp|ti3] ICC, MPP profile or TI3 to use +outfile Base name for input[ti1]/output[ti3] file +.PP +Author: Graeme W. Gill, licensed under the AGPL Version 3 +Error 'Unrecognised flag' +usage: synthread [\-v] [\-s] [separation.icm] profile.[icc|mpp|ti3] outfile +.TP +\fB\-v\fR +Verbose mode +.TP +\fB\-p\fR +Use separation profile +.TP +\fB\-l\fR +Construct and output in Lab rather than XYZ +.TP +\fB\-i\fR p1,p2,p3, +Set input channel curve powers (default 1.0) +.TP +\fB\-k\fR x1:y1,x2:y2,x3:y2 +Set input channel inflection points (default 0.5,0.5) +.TP +\fB\-o\fR p1,p2,p3, +Set output channel curve powers (default 1.0) +.TP +\fB\-r\fR level +Add average random deviation of <level>% to input device values (after sep.) +.TP +\fB\-R\fR level +Add average random deviation of <level>% to output PCS values +.TP +\fB\-u\fR +Make random deviations have uniform distributions rather than normal +.TP +\fB\-b\fR L,a,b +Scale black point to target Lab value +.TP +[separation.icm] +Device link separation profile +.IP +profile.[icc|mpp|ti3] ICC, MPP profile or TI3 to use +outfile Base name for input[ti1]/output[ti3] file diff --git a/debian/man/targen.1 b/debian/man/targen.1 new file mode 100644 index 0000000..89e5b95 --- /dev/null +++ b/debian/man/targen.1 @@ -0,0 +1,221 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH GENERATE "1" "September 2014" "Generate Target deviceb test chart color values, Version 1.6.3" "User Commands" +.SH NAME +Generate \- Generate Target deviceb test chart color values. +.SH DESCRIPTION +Generate Target deviceb test chart color values, Version 1.6.3 +Author: Graeme W. Gill, licensed under the AGPL Version 3 +usage: targen [options] outfile +.IP +Diagnostic: Usage requested +.TP +\fB\-v\fR [level] +Verbose mode [optional level 1..N] +.TP +\fB\-d\fR col_comb +choose colorant combination from the following: +0: Print grey +1: Video grey +2: Print RGB +3: Video RGB +4: CMYK +5: CMY +6: CMYK + Light CM +7: CMYK + Light CMK +8: CMYK + Red + Blue +9: CMYK + Orange + Green +10: CMYK + Light CMK + Light Light K +11: CMYK + Orange + Green + Light CM +12: CMYK + Light CM + Medium CM +.TP +\fB\-D\fR colorant +Add or delete colorant from combination: +(Use \-?? to list known colorants) +.TP +\fB\-G\fR +Generate good optimized points rather than Fast +.TP +\fB\-e\fR patches +White test patches (default 4) +.TP +\fB\-B\fR patches +Black test patches (default 4 Grey/RGB, else 0) +.TP +\fB\-s\fR steps +Single channel steps (default grey 50, color 0) +.TP +\fB\-g\fR steps +Grey axis RGB or CMY steps (default 0) +.TP +\fB\-m\fR steps +Multidimensional device space cube steps (default 0) +.TP +\fB\-b\fR steps +Multidimensional body centered cubic steps (default 0) +.TP +\fB\-f\fR patches +Add iterative & adaptive full spread patches to total (default grey 0, color 836) +Default is Optimised Farthest Point Sampling (OFPS) +.TP +\fB\-t\fR +Use incremental far point for full spread +.TP +\fB\-r\fR +Use device space random for full spread +.TP +\fB\-R\fR +Use perceptual space random for full spread +.TP +\fB\-q\fR +Use device space\-filling quasi\-random for full spread +.TP +\fB\-Q\fR +Use perceptual space\-filling quasi\-random for full spread +.TP +\fB\-i\fR +Use device space body centered cubic grid for full spread +.TP +\fB\-I\fR +Use perceptual space body centered cubic grid for full spread +.TP +\fB\-a\fR angle +Simplex grid angle 0.0 \- 0.5 for B.C.C. grid, default 0.333300 +.TP +\fB\-A\fR adaptation +Degree of adaptation of OFPS 0.0 \- 1.0 (default 0.1, \fB\-c\fR profile used 1.0) +.TP +\fB\-l\fR ilimit +Total ink limit in % (default = none) +.TP +\fB\-p\fR power +Optional power\-like value applied to all device values. +.TP +\fB\-c\fR profile +Optional device ICC or MPP pre\-conditioning profile filename +(Use "none" to turn off any conditioning) +.TP +\fB\-N\fR nemphasis +Degree of neutral axis patch concentration 0.0\-1.0 (default 0.50) +.TP +\fB\-V\fR demphasis +Degree of dark region patch concentration 1.0\-4.0 (default 1.00 = none) +.TP +\fB\-F\fR L,a,b,rad +Filter out samples outside Lab sphere. +.TP +\fB\-w\fR +Dump diagnostic outfilel.wrl file (Lab locations) +.TP +\fB\-W\fR +Dump diagnostic outfiled.wrl file (Device locations) +.TP +outfile +Base name for output(.ti1) +.PP +Author: Graeme W. Gill, licensed under the AGPL Version 3 +usage: targen [options] outfile +.IP +Diagnostic: Usage requested +.TP +\fB\-v\fR [level] +Verbose mode [optional level 1..N] +.TP +\fB\-d\fR col_comb +choose colorant combination from the following: +0: Print grey +1: Video grey +2: Print RGB +3: Video RGB +4: CMYK +5: CMY +6: CMYK + Light CM +7: CMYK + Light CMK +8: CMYK + Red + Blue +9: CMYK + Orange + Green +10: CMYK + Light CMK + Light Light K +11: CMYK + Orange + Green + Light CM +12: CMYK + Light CM + Medium CM +.TP +\fB\-D\fR colorant +Add or delete colorant from combination: +(Use \-?? to list known colorants) +.TP +\fB\-G\fR +Generate good optimized points rather than Fast +.TP +\fB\-e\fR patches +White test patches (default 4) +.TP +\fB\-B\fR patches +Black test patches (default 4 Grey/RGB, else 0) +.TP +\fB\-s\fR steps +Single channel steps (default grey 50, color 0) +.TP +\fB\-g\fR steps +Grey axis RGB or CMY steps (default 0) +.TP +\fB\-m\fR steps +Multidimensional device space cube steps (default 0) +.TP +\fB\-b\fR steps +Multidimensional body centered cubic steps (default 0) +.TP +\fB\-f\fR patches +Add iterative & adaptive full spread patches to total (default grey 0, color 836) +Default is Optimised Farthest Point Sampling (OFPS) +.TP +\fB\-t\fR +Use incremental far point for full spread +.TP +\fB\-r\fR +Use device space random for full spread +.TP +\fB\-R\fR +Use perceptual space random for full spread +.TP +\fB\-q\fR +Use device space\-filling quasi\-random for full spread +.TP +\fB\-Q\fR +Use perceptual space\-filling quasi\-random for full spread +.TP +\fB\-i\fR +Use device space body centered cubic grid for full spread +.TP +\fB\-I\fR +Use perceptual space body centered cubic grid for full spread +.TP +\fB\-a\fR angle +Simplex grid angle 0.0 \- 0.5 for B.C.C. grid, default 0.333300 +.TP +\fB\-A\fR adaptation +Degree of adaptation of OFPS 0.0 \- 1.0 (default 0.1, \fB\-c\fR profile used 1.0) +.TP +\fB\-l\fR ilimit +Total ink limit in % (default = none) +.TP +\fB\-p\fR power +Optional power\-like value applied to all device values. +.TP +\fB\-c\fR profile +Optional device ICC or MPP pre\-conditioning profile filename +(Use "none" to turn off any conditioning) +.TP +\fB\-N\fR nemphasis +Degree of neutral axis patch concentration 0.0\-1.0 (default 0.50) +.TP +\fB\-V\fR demphasis +Degree of dark region patch concentration 1.0\-4.0 (default 1.00 = none) +.TP +\fB\-F\fR L,a,b,rad +Filter out samples outside Lab sphere. +.TP +\fB\-w\fR +Dump diagnostic outfilel.wrl file (Lab locations) +.TP +\fB\-W\fR +Dump diagnostic outfiled.wrl file (Device locations) +.TP +outfile +Base name for output(.ti1) diff --git a/debian/man/tiffgamut.1 b/debian/man/tiffgamut.1 new file mode 100644 index 0000000..23713fe --- /dev/null +++ b/debian/man/tiffgamut.1 @@ -0,0 +1,173 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH CREATE "1" "September 2014" "Create VRML image of the gamut surface of a TIFF or JPEG, Version 1.6.3" "User Commands" +.SH NAME +Create \- Create VRML image of the gamut surface of a TIFF. +.SH DESCRIPTION +Create VRML image of the gamut surface of a TIFF or JPEG, Version 1.6.3 +Author: Graeme W. Gill, licensed under the AGPL Version 3 +usage: tiffgamut [\-v level] [profile.icm | embedded.tif/jpg] infile1.tif/jpg [infile2.tif/jpg ...] +.TP +\fB\-v\fR +Verbose +.TP +\fB\-d\fR sres +Surface resolution details 1.0 \- 50.0 +.TP +\fB\-w\fR +emit VRML .wrl file as well as CGATS .gam file +.TP +\fB\-n\fR +Don't add VRML axes or white/black point +.TP +\fB\-k\fR +Add markers for prim. & sec. "cusp" points +.TP +\fB\-f\fR perc +Filter by popularity, perc = percent to use +.TP +\fB\-i\fR intent +p = perceptual, r = relative colorimetric, +s = saturation, a = absolute (default), d = profile default +.TP +\fB\-p\fR oride +l = Lab_PCS (default), j = CIECAM02 Appearance Jab +.TP +\fB\-o\fR order +n = normal (priority: lut > matrix > monochrome) +r = reverse (priority: monochrome > matrix > lut) +.TP +\fB\-c\fR viewcond +set appearance mode and viewing conditions for CIECAM02, +either an enumerated choice, or a parameter:value changes +.IP +pp \- Practical Reflection Print (ISO\-3664 P2) +pe \- Print evaluation environment (CIE 116\-1995) +pc \- Critical print evaluation environment (ISO\-3664 P1) +mt \- Monitor in typical work environment +mb \- Bright monitor in bright work environment +md \- Monitor in darkened work environment +jm \- Projector in dim environment +jd \- Projector in dark environment +tv \- Television/Film Studio +.IP +pcd \- Photo CD \- original scene outdoors +.IP +ob \- Original scene \- Bright Outdoors +cx \- Cut Sheet Transparencies on a viewing box +.TP +s:surround +n = auto, a = average, m = dim, d = dark, +c = transparency (default average) +.TP +w:X:Y:Z +Adapted white point as XYZ (default media white) +.TP +w:x:y +Adapted white point as x, y +.TP +a:adaptation +Adaptation luminance in cd.m^2 (default 50.0) +.TP +b:background +Background % of image luminance (default 20) +.TP +l:imagewhite +Image white in cd.m^2 if surround = auto (default 250) +.TP +f:flare +Flare light % of image luminance (default 0) +.TP +g:glare +Flare light % of ambient (default 1) +.TP +g:X:Y:Z +Flare color as XYZ (default media white, Abs: D50) +.TP +g:x:y +Flare color as x, y +.HP +\fB\-O\fR outputfile Override the default output filename. +.PP +Author: Graeme W. Gill, licensed under the AGPL Version 3 +usage: tiffgamut [\-v level] [profile.icm | embedded.tif/jpg] infile1.tif/jpg [infile2.tif/jpg ...] +.TP +\fB\-v\fR +Verbose +.TP +\fB\-d\fR sres +Surface resolution details 1.0 \- 50.0 +.TP +\fB\-w\fR +emit VRML .wrl file as well as CGATS .gam file +.TP +\fB\-n\fR +Don't add VRML axes or white/black point +.TP +\fB\-k\fR +Add markers for prim. & sec. "cusp" points +.TP +\fB\-f\fR perc +Filter by popularity, perc = percent to use +.TP +\fB\-i\fR intent +p = perceptual, r = relative colorimetric, +s = saturation, a = absolute (default), d = profile default +.TP +\fB\-p\fR oride +l = Lab_PCS (default), j = CIECAM02 Appearance Jab +.TP +\fB\-o\fR order +n = normal (priority: lut > matrix > monochrome) +r = reverse (priority: monochrome > matrix > lut) +.TP +\fB\-c\fR viewcond +set appearance mode and viewing conditions for CIECAM02, +either an enumerated choice, or a parameter:value changes +.IP +pp \- Practical Reflection Print (ISO\-3664 P2) +pe \- Print evaluation environment (CIE 116\-1995) +pc \- Critical print evaluation environment (ISO\-3664 P1) +mt \- Monitor in typical work environment +mb \- Bright monitor in bright work environment +md \- Monitor in darkened work environment +jm \- Projector in dim environment +jd \- Projector in dark environment +tv \- Television/Film Studio +.IP +pcd \- Photo CD \- original scene outdoors +.IP +ob \- Original scene \- Bright Outdoors +cx \- Cut Sheet Transparencies on a viewing box +.TP +s:surround +n = auto, a = average, m = dim, d = dark, +c = transparency (default average) +.TP +w:X:Y:Z +Adapted white point as XYZ (default media white) +.TP +w:x:y +Adapted white point as x, y +.TP +a:adaptation +Adaptation luminance in cd.m^2 (default 50.0) +.TP +b:background +Background % of image luminance (default 20) +.TP +l:imagewhite +Image white in cd.m^2 if surround = auto (default 250) +.TP +f:flare +Flare light % of image luminance (default 0) +.TP +g:glare +Flare light % of ambient (default 1) +.TP +g:X:Y:Z +Flare color as XYZ (default media white, Abs: D50) +.TP +g:x:y +Flare color as x, y +.HP +\fB\-O\fR outputfile Override the default output filename. diff --git a/debian/man/timage.1 b/debian/man/timage.1 new file mode 100644 index 0000000..7a30c33 --- /dev/null +++ b/debian/man/timage.1 @@ -0,0 +1,59 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH CREATE "1" "September 2014" "Create test images, default hex RGB surface and wedge, Version 1.6.3" "User Commands" +.SH NAME +Create \- Create test images, default hex RGB surface and wedge. +.SH DESCRIPTION +Create test images, default hex RGB surface and wedge, Version 1.6.3 +Author: Graeme W. Gill, licensed under the AGPL Version 3 +usage: timage [\-options] outfile.tif +.TP +\fB\-t\fR +Generate rectangular gamut boundary test chart +.TP +\fB\-p\fR steps +Generate a colorspace step chart with L* steps^2 +.TP +\fB\-r\fR res +Resolution in DPI (default 200) +.TP +\fB\-s\fR +Smooth blend +.TP +\fB\-x\fR +16 bit output +.TP +\fB\-4\fR +CMYK output +.TP +\fB\-g\fR prop +Percentage towards grey (default 0%) +.TP +outfile.tif +Profile to check against +.PP +Author: Graeme W. Gill, licensed under the AGPL Version 3 +usage: timage [\-options] outfile.tif +.TP +\fB\-t\fR +Generate rectangular gamut boundary test chart +.TP +\fB\-p\fR steps +Generate a colorspace step chart with L* steps^2 +.TP +\fB\-r\fR res +Resolution in DPI (default 200) +.TP +\fB\-s\fR +Smooth blend +.TP +\fB\-x\fR +16 bit output +.TP +\fB\-4\fR +CMYK output +.TP +\fB\-g\fR prop +Percentage towards grey (default 0%) +.TP +outfile.tif +Profile to check against diff --git a/debian/man/txt2ti3.1 b/debian/man/txt2ti3.1 new file mode 100644 index 0000000..07d22b7 --- /dev/null +++ b/debian/man/txt2ti3.1 @@ -0,0 +1,61 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH CONVERT "1" "September 2014" "Convert Gretag/Logo or X-Rite ColorPport raw RGB or CMYK device profile data to Argyll CGATS data, Version 1.6.3" "User Commands" +.SH NAME +Convert \- Convert Gretag/Logo or X-Rite ColorPport raw RGB or CMYK device profile data to Argyll CGATS data. +.SH DESCRIPTION +Convert Gretag/Logo or X\-Rite ColorPport raw RGB or CMYK device profile data to Argyll CGATS data, Version 1.6.3 +Author: Graeme W. Gill, licensed under the AGPL Version 3 +error: Unknown flag +usage: txt2ti3 [\-v] [\-l limit] [devfile] infile [specfile] outbase +.TP +\fB\-2\fR +Create dummy .ti2 file as well +.TP +\fB\-l\fR limit +set ink limit, 0 \- 400% (default max in file) +.TP +\fB\-d\fR +Set type of device as Display, not Output +.TP +\fB\-i\fR +Set type of device as Input, not Output +.TP +[devfile] +Input Device CMYK target file (typically file.txt) +.TP +infile +Input CIE, Spectral or Device & Spectral file (typically file.txt) +.TP +[specfile] +Input Spectral file (typically file.txt) +.TP +outbasename +Output file basename for .ti3 and .ti2 +.PP +Author: Graeme W. Gill, licensed under the AGPL Version 3 +error: Unknown flag +usage: txt2ti3 [\-v] [\-l limit] [devfile] infile [specfile] outbase +.TP +\fB\-2\fR +Create dummy .ti2 file as well +.TP +\fB\-l\fR limit +set ink limit, 0 \- 400% (default max in file) +.TP +\fB\-d\fR +Set type of device as Display, not Output +.TP +\fB\-i\fR +Set type of device as Input, not Output +.TP +[devfile] +Input Device CMYK target file (typically file.txt) +.TP +infile +Input CIE, Spectral or Device & Spectral file (typically file.txt) +.TP +[specfile] +Input Spectral file (typically file.txt) +.TP +outbasename +Output file basename for .ti3 and .ti2 diff --git a/debian/man/viewgam.1 b/debian/man/viewgam.1 new file mode 100644 index 0000000..ea27eca --- /dev/null +++ b/debian/man/viewgam.1 @@ -0,0 +1,79 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH VIEW "1" "September 2014" "View gamuts Version 1.6.3" "User Commands" +.SH NAME +View \- View gamuts. +.SH DESCRIPTION +View gamuts Version 1.6.3 +Author: Graeme W. Gill, licensed under the AGPL Version 3 +Diagnostic: Too few arguments, got 1 expect at least 2 +usage: viewgam { [\-c color] [\-t trans] [\-w|s] infile.gam } ... outfile.wrl +.TP +\fB\-c\fR color +Color to make gamut, r = red, g = green, b = blue +c = cyan, m = magenta, y = yellow, e = grey, w = white +n = natural color +.TP +\fB\-t\fR trans +Set transparency from 0.0 (opaque) to 1.0 (invisible) +.TP +\fB\-w\fR +Show as a wireframe +.TP +\fB\-s\fR +Show as a solid surace +.TP +infile.gam +Name of .gam file +Repeat above for each input file +.TP +\fB\-n\fR +Don't add Lab axes +.TP +\fB\-k\fR +Add markers for prim. & sec. "cusp" points +.TP +\fB\-i\fR +Compute and print intersecting volume of first 2 gamuts +.TP +\fB\-I\fR isect.gam +Same as \fB\-i\fR, but save intersection gamut to isect.gam +.TP +outfile.wrl +Name of output .wrl file +.PP +Author: Graeme W. Gill, licensed under the AGPL Version 3 +Diagnostic: Too few arguments, got 1 expect at least 2 +usage: viewgam { [\-c color] [\-t trans] [\-w|s] infile.gam } ... outfile.wrl +.TP +\fB\-c\fR color +Color to make gamut, r = red, g = green, b = blue +c = cyan, m = magenta, y = yellow, e = grey, w = white +n = natural color +.TP +\fB\-t\fR trans +Set transparency from 0.0 (opaque) to 1.0 (invisible) +.TP +\fB\-w\fR +Show as a wireframe +.TP +\fB\-s\fR +Show as a solid surace +.TP +infile.gam +Name of .gam file +Repeat above for each input file +.TP +\fB\-n\fR +Don't add Lab axes +.TP +\fB\-k\fR +Add markers for prim. & sec. "cusp" points +.TP +\fB\-i\fR +Compute and print intersecting volume of first 2 gamuts +.TP +\fB\-I\fR isect.gam +Same as \fB\-i\fR, but save intersection gamut to isect.gam +.TP +outfile.wrl +Name of output .wrl file diff --git a/debian/man/xicclu.1 b/debian/man/xicclu.1 new file mode 100644 index 0000000..98fdeff --- /dev/null +++ b/debian/man/xicclu.1 @@ -0,0 +1,319 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH LOOKUP "1" "September 2014" "Lookup ICC or CAL colors, Version 1.6.3" "User Commands" +.SH NAME +Lookup \- Translate colors through an xicc. +.SH DESCRIPTION +Lookup ICC or CAL colors, Version 1.6.3 +Author: Graeme W. Gill, licensed under the AGPL Version 3 +usage: xicclu [\-options] profile_or_cal +Diagnostic: Unknown flag +.TP +\fB\-v\fR level +Verbosity level 0 \- 2 (default = 1) +.TP +\fB\-g\fR +Plot slice instead of looking colors up. (Default white to black) +.TP +\fB\-G\fR s:L:a:b +Override plot slice start with Lab or Jab co\-ordinate +.TP +\fB\-G\fR e:L:a:b +Override plot slice end with Lab or Jab co\-ordinate +.TP +\fB\-f\fR function +f = forward, b = backwards, g = gamut, p = preview +if = inverted forward, ib = inverted backwards +.TP +\fB\-i\fR intent +a = absolute, r = relative colorimetric +p = perceptual, s = saturation +.TP +\fB\-o\fR order +n = normal (priority: lut > matrix > monochrome) +r = reverse (priority: monochrome > matrix > lut) +.TP +\fB\-p\fR oride +x = XYZ_PCS, X = XYZ * 100, l = Lab_PCS, L = LCh, y = Yxy +j = CIECAM02 Appearance Jab, J = CIECAM02 Appearance JCh +.TP +\fB\-s\fR scale +Scale device range 0.0 \- scale rather than 0.0 \- 1.0 +.TP +\fB\-e\fR flag +Video encode device input as: +.TP +\fB\-E\fR flag +Video decode device output as: +.TP +n +normal 0..1 full range RGB levels (default) +.TP +t +(16\-235)/255 "TV" RGB levels +.TP +6 +Rec601 YCbCr SD (16\-235,240)/255 "TV" levels +.TP +7 +Rec709 1125/60Hz YCbCr HD (16\-235,240)/255 "TV" levels +.TP +5 +Rec709 1250/50Hz YCbCr HD (16\-235,240)/255 "TV" levels +.TP +2 +Rec2020 YCbCr UHD (16\-235,240)/255 "TV" levels +.TP +C +Rec2020 Constant Luminance YCbCr UHD (16\-235,240)/255 "TV" levels +.TP +\fB\-k\fR [zhxrlv] +Black value target: z = zero K, +h = 0.5 K, x = max K, r = ramp K (def.) +l = extra PCS input is portion of K locus +v = extra PCS input is K target value +.HP +\fB\-k\fR p stle stpo enpo enle shape +.IP +stle: K level at White 0.0 \- 1.0 +stpo: start point of transition Wh 0.0 \- Bk 1.0 +enpo: End point of transition Wh 0.0 \- Bk 1.0 +enle: K level at Black 0.0 \- 1.0 +shape: 1.0 = straight, 0.0\-1.0 concave, 1.0\-2.0 convex +.HP +\fB\-k\fR q stle0 stpo0 enpo0 enle0 shape0 stle2 stpo2 enpo2 enle2 shape2 +.IP +Transfer extra PCS input to dual curve limits +.TP +\fB\-K\fR parameters +Same as \fB\-k\fR, but target is K locus rather than K value itself +.TP +\fB\-l\fR tlimit +set total ink limit, 0 \- 400% (estimate by default) +.TP +\fB\-L\fR klimit +set black ink limit, 0 \- 100% (estimate by default) +.TP +\fB\-a\fR +show actual target values if clipped +.TP +\fB\-u\fR +warn if output PCS is outside the spectrum locus +.TP +\fB\-m\fR +merge output processing into clut +.TP +\fB\-b\fR +use CAM Jab for clipping +.TP +\fB\-c\fR viewcond +set viewing conditions for CIECAM97s, +either an enumerated choice, or a parameter:value changes +.IP +pp \- Practical Reflection Print (ISO\-3664 P2) +pe \- Print evaluation environment (CIE 116\-1995) +pc \- Critical print evaluation environment (ISO\-3664 P1) +mt \- Monitor in typical work environment +mb \- Bright monitor in bright work environment +md \- Monitor in darkened work environment +jm \- Projector in dim environment +jd \- Projector in dark environment +tv \- Television/Film Studio +.IP +pcd \- Photo CD \- original scene outdoors +.IP +ob \- Original scene \- Bright Outdoors +cx \- Cut Sheet Transparencies on a viewing box +.TP +s:surround +n = auto, a = average, m = dim, d = dark, +c = transparency (default average) +.TP +w:X:Y:Z +Adapted white point as XYZ (default media white, Abs: D50) +.TP +w:x:y +Adapted white point as x, y +.TP +a:adaptation +Adaptation luminance in cd.m^2 (default 50.0) +.TP +b:background +Background % of image luminance (default 20) +.TP +l:imagewhite +Image white in cd.m^2 if surround = auto (default 250) +.TP +f:flare +Flare light % of image luminance (default 0) +.TP +g:glare +Flare light % of ambient (default 1) +.TP +g:X:Y:Z +Flare color as XYZ (default media white, Abs: D50) +.TP +g:x:y +Flare color as x, y +.IP +The colors to be translated should be fed into standard in, +one input color per line, white space separated. +A line starting with a # will be ignored. +A line not starting with a number will terminate the program. +Use \fB\-v0\fR for just output colors. +.PP +Author: Graeme W. Gill, licensed under the AGPL Version 3 +usage: xicclu [\-options] profile_or_cal +Diagnostic: Unknown flag +.TP +\fB\-v\fR level +Verbosity level 0 \- 2 (default = 1) +.TP +\fB\-g\fR +Plot slice instead of looking colors up. (Default white to black) +.TP +\fB\-G\fR s:L:a:b +Override plot slice start with Lab or Jab co\-ordinate +.TP +\fB\-G\fR e:L:a:b +Override plot slice end with Lab or Jab co\-ordinate +.TP +\fB\-f\fR function +f = forward, b = backwards, g = gamut, p = preview +if = inverted forward, ib = inverted backwards +.TP +\fB\-i\fR intent +a = absolute, r = relative colorimetric +p = perceptual, s = saturation +.TP +\fB\-o\fR order +n = normal (priority: lut > matrix > monochrome) +r = reverse (priority: monochrome > matrix > lut) +.TP +\fB\-p\fR oride +x = XYZ_PCS, X = XYZ * 100, l = Lab_PCS, L = LCh, y = Yxy +j = CIECAM02 Appearance Jab, J = CIECAM02 Appearance JCh +.TP +\fB\-s\fR scale +Scale device range 0.0 \- scale rather than 0.0 \- 1.0 +.TP +\fB\-e\fR flag +Video encode device input as: +.TP +\fB\-E\fR flag +Video decode device output as: +.TP +n +normal 0..1 full range RGB levels (default) +.TP +t +(16\-235)/255 "TV" RGB levels +.TP +6 +Rec601 YCbCr SD (16\-235,240)/255 "TV" levels +.TP +7 +Rec709 1125/60Hz YCbCr HD (16\-235,240)/255 "TV" levels +.TP +5 +Rec709 1250/50Hz YCbCr HD (16\-235,240)/255 "TV" levels +.TP +2 +Rec2020 YCbCr UHD (16\-235,240)/255 "TV" levels +.TP +C +Rec2020 Constant Luminance YCbCr UHD (16\-235,240)/255 "TV" levels +.TP +\fB\-k\fR [zhxrlv] +Black value target: z = zero K, +h = 0.5 K, x = max K, r = ramp K (def.) +l = extra PCS input is portion of K locus +v = extra PCS input is K target value +.HP +\fB\-k\fR p stle stpo enpo enle shape +.IP +stle: K level at White 0.0 \- 1.0 +stpo: start point of transition Wh 0.0 \- Bk 1.0 +enpo: End point of transition Wh 0.0 \- Bk 1.0 +enle: K level at Black 0.0 \- 1.0 +shape: 1.0 = straight, 0.0\-1.0 concave, 1.0\-2.0 convex +.HP +\fB\-k\fR q stle0 stpo0 enpo0 enle0 shape0 stle2 stpo2 enpo2 enle2 shape2 +.IP +Transfer extra PCS input to dual curve limits +.TP +\fB\-K\fR parameters +Same as \fB\-k\fR, but target is K locus rather than K value itself +.TP +\fB\-l\fR tlimit +set total ink limit, 0 \- 400% (estimate by default) +.TP +\fB\-L\fR klimit +set black ink limit, 0 \- 100% (estimate by default) +.TP +\fB\-a\fR +show actual target values if clipped +.TP +\fB\-u\fR +warn if output PCS is outside the spectrum locus +.TP +\fB\-m\fR +merge output processing into clut +.TP +\fB\-b\fR +use CAM Jab for clipping +.TP +\fB\-c\fR viewcond +set viewing conditions for CIECAM97s, +either an enumerated choice, or a parameter:value changes +.IP +pp \- Practical Reflection Print (ISO\-3664 P2) +pe \- Print evaluation environment (CIE 116\-1995) +pc \- Critical print evaluation environment (ISO\-3664 P1) +mt \- Monitor in typical work environment +mb \- Bright monitor in bright work environment +md \- Monitor in darkened work environment +jm \- Projector in dim environment +jd \- Projector in dark environment +tv \- Television/Film Studio +.IP +pcd \- Photo CD \- original scene outdoors +.IP +ob \- Original scene \- Bright Outdoors +cx \- Cut Sheet Transparencies on a viewing box +.TP +s:surround +n = auto, a = average, m = dim, d = dark, +c = transparency (default average) +.TP +w:X:Y:Z +Adapted white point as XYZ (default media white, Abs: D50) +.TP +w:x:y +Adapted white point as x, y +.TP +a:adaptation +Adaptation luminance in cd.m^2 (default 50.0) +.TP +b:background +Background % of image luminance (default 20) +.TP +l:imagewhite +Image white in cd.m^2 if surround = auto (default 250) +.TP +f:flare +Flare light % of image luminance (default 0) +.TP +g:glare +Flare light % of ambient (default 1) +.TP +g:X:Y:Z +Flare color as XYZ (default media white, Abs: D50) +.TP +g:x:y +Flare color as x, y +.IP +The colors to be translated should be fed into standard in, +one input color per line, white space separated. +A line starting with a # will be ignored. +A line not starting with a number will terminate the program. +Use \fB\-v0\fR for just output colors. |