summaryrefslogtreecommitdiff
path: root/debian/man
diff options
context:
space:
mode:
Diffstat (limited to 'debian/man')
-rw-r--r--debian/man/applycal.130
-rw-r--r--debian/man/average.129
-rw-r--r--debian/man/cb2ti3.121
-rw-r--r--debian/man/cctiff.173
-rw-r--r--debian/man/ccxxmake.191
-rw-r--r--debian/man/chartread.196
-rw-r--r--debian/man/collink.1241
-rw-r--r--debian/man/colprof.1186
-rw-r--r--debian/man/colverify.168
-rw-r--r--debian/man/dispcal.1156
-rw-r--r--debian/man/dispread.1103
-rw-r--r--debian/man/dispwin.181
-rw-r--r--debian/man/extracticc.112
-rw-r--r--debian/man/extractttag.118
-rw-r--r--debian/man/fakeCMY.121
-rw-r--r--debian/man/fakeread.190
-rw-r--r--debian/man/greytiff.118
-rw-r--r--debian/man/iccdump.121
-rw-r--r--debian/man/iccgamut.197
-rw-r--r--debian/man/icclu.134
-rw-r--r--debian/man/illumread.141
-rw-r--r--debian/man/invprofcheck.145
-rw-r--r--debian/man/kodak2ti3.124
-rw-r--r--debian/man/ls2ti3.113
-rw-r--r--debian/man/mppcheck.129
-rw-r--r--debian/man/mpplu.157
-rw-r--r--debian/man/mppprof.130
-rw-r--r--debian/man/oeminst.128
-rw-r--r--debian/man/printcal.177
-rw-r--r--debian/man/printtarg.1125
-rw-r--r--debian/man/profcheck.161
-rw-r--r--debian/man/refine.157
-rw-r--r--debian/man/revfix.149
-rw-r--r--debian/man/scanin.1114
-rw-r--r--debian/man/spec2cie.147
-rw-r--r--debian/man/specplot.128
-rw-r--r--debian/man/splitti3.133
-rw-r--r--debian/man/spotread.1123
-rw-r--r--debian/man/synthcal.147
-rw-r--r--debian/man/synthread.145
-rw-r--r--debian/man/targen.1112
-rw-r--r--debian/man/tiffgamut.190
-rw-r--r--debian/man/timage.133
-rw-r--r--debian/man/txt2ti3.133
-rw-r--r--debian/man/viewgam.142
-rw-r--r--debian/man/xicclu.1162
46 files changed, 3031 insertions, 0 deletions
diff --git a/debian/man/applycal.1 b/debian/man/applycal.1
new file mode 100644
index 0000000..eb2f902
--- /dev/null
+++ b/debian/man/applycal.1
@@ -0,0 +1,30 @@
+.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1.
+.TH APPLY "1" "September 2014" "applycal" "User Commands"
+.SH NAME
+Apply \- Apply device calibration to an ICC profile.
+.SH DESCRIPTION
+Apply device calibration to an ICC profile
+.SH SYNOPSIS
+.B applycal
+.RB [\-options] [calfile.cal] inprof.icc [outprof.icc]
+.TP
+\fB\-v\fR
+Verbose mode
+.TP
+\fB\-a\fR
+Apply or re\-apply calibration (default)
+.TP
+\fB\-u\fR
+Remove calibration
+.TP
+\fB\-c\fR
+Check calibration
+.TP
+calfile.cal
+Calibration file to apply
+.TP
+inprof.icc
+ICC profile to read
+.TP
+outprof.icc
+modified ICC profile to write \ No newline at end of file
diff --git a/debian/man/average.1 b/debian/man/average.1
new file mode 100644
index 0000000..ae80f1f
--- /dev/null
+++ b/debian/man/average.1
@@ -0,0 +1,29 @@
+.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1.
+.TH AVERAGE "1" "September 2014" "average" "User Commands"
+.SH NAME
+Average \- Average or merge values in .ti3 like files.
+.SH DESCRIPTION
+Average or merge values in .ti3 like files
+.IP
+Diagnostic: Too few arguments (1, minimum is 2)
+.SH SYNOPSIS
+.B average
+.RB [\-options]\ \input1.ti3\ \input2.ti3 ... output.ti3
+.TP
+\fB\-v\fR
+Verbose
+.TP
+\fB\-m\fR
+Merge rather than average
+.TP
+input1.ti3
+First input file
+.TP
+input2.ti3
+Second input file
+.TP
+\&...
+etc.
+.TP
+output.ti3
+Resulting averaged or merged output file
diff --git a/debian/man/cb2ti3.1 b/debian/man/cb2ti3.1
new file mode 100644
index 0000000..ddf3a9d
--- /dev/null
+++ b/debian/man/cb2ti3.1
@@ -0,0 +1,21 @@
+.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1.
+.TH CONVERT "1" "September 2014" "cb2ti3" "User Commands"
+.SH NAME
+Convert \- Convert Colorblind raw device profile data to Argyll data.
+.SH DESCRIPTION
+Convert Colorblind raw device profile data to Argyll data
+.SH SYNOPSIS
+.B cb2ti3
+.RB [\-v] [\-l limit] infile outfile
+.TP
+\fB\-v\fR
+Verbose mode
+.TP
+\fB\-l\fR limit
+Set inklimit in .ti3 file
+.TP
+infile
+Base name for input.CMY and input.nCIE file
+.TP
+outfile
+Base name for output.ti3 file \ No newline at end of file
diff --git a/debian/man/cctiff.1 b/debian/man/cctiff.1
new file mode 100644
index 0000000..cb23e31
--- /dev/null
+++ b/debian/man/cctiff.1
@@ -0,0 +1,73 @@
+.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1.
+.TH COLOR "1" "September 2014" "cctiff" "User Commands"
+.SH NAME
+Color \- Color Correct a TIFF file using any sequence of ICC profiles or Calibrations.
+.SH DESCRIPTION
+Color Correct a TIFF or JPEG file using any sequence of ICC profiles or Calibrations
+.SH SYNOPSIS
+.B cctiff
+.RB [\-options]\ { [\-i intent]\ profile.icc\ |\ calbrtn.cal\ ...}\ infile.(tif|jpg)\ outfile.(tif|jpg)
+.TP
+\fB\-v\fR
+Verbose.
+.TP
+\fB\-c\fR
+Combine linearisation curves into one transform.
+.TP
+\fB\-p\fR
+Use slow precise correction.
+.TP
+\fB\-k\fR
+Check fast result against precise, and report.
+.TP
+\fB\-r\fR n
+Override the default CLUT resolution
+.TP
+\fB\-t\fR n
+Choose output encoding from 1..n
+.TP
+\fB\-f\fR [T|J]
+Set output format to Tiff or Jpeg (Default is same as input)
+.TP
+\fB\-q\fR quality
+Set JPEG quality 1..100 (Default 80)
+.TP
+\fB\-a\fR
+Read and Write planes > 4 as alpha planes
+.TP
+\fB\-I\fR
+Ignore any file or profile colorspace mismatches
+.TP
+\fB\-D\fR
+Don't append or set the output TIFF or JPEG description
+.TP
+\fB\-e\fR profile.[icc | tiff | jpg]
+Optionally embed a profile in the destination TIFF or JPEG file.
+.IP
+Then for each profile in sequence:
+.TP
+\fB\-i\fR intent
+p = perceptual, r = relative colorimetric,
+s = saturation, a = absolute colorimetric
+.TP
+\fB\-o\fR order
+n = normal (priority: lut > matrix > monochrome)
+r = reverse (priority: monochrome > matrix > lut)
+.TP
+profile.[icc | tiff]
+Device, Link or Abstract profile
+.IP
+( May be embedded profile in TIFF/JPEG file)
+.IP
+or each calibration file in sequence:
+.TP
+\fB\-d\fR dir
+f = forward cal. (default), b = backwards cal.
+.TP
+calbrtn.cal
+Device calibration file.
+.TP
+infile.tif/jpg
+Input TIFF/JPEG file in appropriate color space
+.IP
+outfile.tif/jpg Output TIFF/JPEG file
diff --git a/debian/man/ccxxmake.1 b/debian/man/ccxxmake.1
new file mode 100644
index 0000000..337db92
--- /dev/null
+++ b/debian/man/ccxxmake.1
@@ -0,0 +1,91 @@
+.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1.
+.TH CREATE "1" "September 2014" "ccmxmake" "User Commands"
+.SH NAME
+Create \- Create CCMX or CCSS.
+.SH DESCRIPTION
+Create CCMX or CCSS
+.SH SYNOPSIS
+.B ccmxmake
+.RB [\-options]\ output.ccmx
+.TP
+\fB\-v\fR
+Verbose mode
+.TP
+\fB\-S\fR
+Create CCSS rather than CCMX
+.HP
+\fB\-f\fR file1.ti3[,file2.ti3] Create from one or two .ti3 files rather than measure.
+.TP
+\fB\-display\fR displayname
+Choose X11 display name
+.TP
+\fB\-d\fR n[,m]
+Choose the display n from the following list (default 1)
+Optionally choose different display m for VideoLUT access
+.IP
+1 name = ':0.0'
+1 = 'Screen 1, Output DVI\-I\-1 at 0, 0, width 1920, height 1080'
+.TP
+\fB\-dweb[\fR:port]
+Display via a web server at port (default 8080)
+.TP
+\fB\-p\fR
+Use telephoto mode (ie. for a projector) (if available)
+.TP
+\fB\-P\fR ho,vo,ss[,vs]
+Position test window and scale it
+ho,vi: 0.0 = left/top, 0.5 = center, 1.0 = right/bottom etc.
+ss: 0.5 = half, 1.0 = normal, 2.0 = double etc.
+.TP
+\fB\-F\fR
+Fill whole screen with black background
+.TP
+\fB\-n\fR
+Don't set override redirect on test window
+.TP
+\fB\-N\fR
+Disable initial calibration of instrument if possible
+.TP
+\fB\-H\fR
+Use high resolution spectrum mode (if available)
+.TP
+\fB\-C\fR "command"
+Invoke shell "command" each time a color is set
+.TP
+\fB\-o\fR observ
+Choose CIE Observer for CCMX spectrometer data:
+1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2
+.TP
+\fB\-s\fR steps
+Override default patch sequence combination steps (default 1)
+.TP
+\fB\-W\fR n|h|x
+Override serial port flow control: n = none, h = HW, x = Xon/Xoff
+.TP
+\fB\-D\fR [level]
+Print debug diagnostics to stderr
+.TP
+\fB\-E\fR desciption
+Override the default overall description
+.TP
+\fB\-I\fR displayname
+Set display make and model description
+.TP
+\fB\-T\fR displaytech
+Set display technology description (ie. CRT, LCD etc.)
+.TP
+\fB\-U\fR c
+Set UI selection character(s)
+.TP
+\fB\-Y\fR r|n
+Set or override refresh/non\-refresh display type
+.TP
+\fB\-Y\fR R:rate
+Override measured refresh rate with rate Hz
+.TP
+\fB\-Y\fR A
+Use non\-adaptive integration time mode (if available).
+.IP
+correction.ccmx | calibration.ccss
+.IP
+File to save result to
diff --git a/debian/man/chartread.1 b/debian/man/chartread.1
new file mode 100644
index 0000000..1d8285e
--- /dev/null
+++ b/debian/man/chartread.1
@@ -0,0 +1,96 @@
+.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1.
+.TH READ "1" "September 2014" "chartread" "User Commands"
+.SH NAME
+Read \- Read Target Test Chart.
+.SH DESCRIPTION
+Read Target Test Chart
+.SH SYNOPSIS
+.B chartread
+.RB [\-options]\ outfile
+.TP
+\fB\-v\fR
+Verbose mode
+.TP
+\fB\-c\fR listno
+Set communication port from the following list (default 1)
+.IP
+** No ports found **
+.TP
+\fB\-t\fR
+Use transmission measurement mode
+.TP
+\fB\-d\fR
+Use display measurement mode (white Y relative results)
+.TP
+\fB\-e\fR
+Emissive for transparency on a light box
+.TP
+\fB\-p\fR
+Measure patch by patch rather than strip
+.TP
+\fB\-x\fR [lx]
+Take external values, either L*a*b* (\fB\-xl\fR) or XYZ (\fB\-xx\fR).
+.TP
+\fB\-n\fR
+Don't save spectral information (default saves spectral)
+.TP
+\fB\-l\fR
+Save CIE as D50 L*a*b* rather than XYZ
+.TP
+\fB\-L\fR
+Save CIE as D50 L*a*b* as well as XYZ
+.TP
+\fB\-r\fR
+Resume reading partly read chart
+.TP
+\fB\-I\fR file.cal
+Override calibration info from .ti2 in resulting .ti3
+.TP
+\fB\-F\fR filter
+Set filter configuration (if aplicable):
+.TP
+n
+None
+.TP
+p
+Polarising filter
+.TP
+6
+D65
+.TP
+u
+U.V. Cut
+.TP
+\fB\-N\fR
+Disable initial calibration of instrument if possible
+.TP
+\fB\-B\fR
+Disable auto bi\-directional strip recognition
+.TP
+\fB\-H\fR
+Use high resolution spectrum mode (if available)
+.TP
+\fB\-X\fR file.ccmx
+Apply Colorimeter Correction Matrix
+.TP
+\fB\-X\fR file.ccss
+Use Colorimeter Calibration Spectral Samples for calibration
+.TP
+\fB\-Q\fR observ
+Choose CIE Observer for CCSS instrument:
+1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2
+.TP
+\fB\-T\fR ratio
+Modify strip patch consistency tolerance by ratio
+.TP
+\fB\-S\fR
+Suppress wrong strip & unexpected value warnings
+.TP
+\fB\-W\fR n|h|x
+Override serial port flow control: n = none, h = HW, x = Xon/Xoff
+.TP
+\fB\-D\fR [level]
+Print debug diagnostics to stderr
+.TP
+outfile
+Base name for input[ti2]/output[ti3] file
diff --git a/debian/man/collink.1 b/debian/man/collink.1
new file mode 100644
index 0000000..35d6c02
--- /dev/null
+++ b/debian/man/collink.1
@@ -0,0 +1,241 @@
+.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1.
+.TH LINK "1" "September 2014" "collink" "User Commands"
+.SH NAME
+Link \- Link ICC profiles.
+.SH DESCRIPTION
+Link ICC profiles
+.SH SYNOPSIS
+.B collink
+.RB [options]\ srcprofile\ dstprofile\ linkedprofile
+.TP
+\fB\-v\fR Verbose
+.HP
+\fB\-A\fR manufacturer Manufacturer description string
+.TP
+\fB\-M\fR model
+Model description string
+.TP
+\fB\-D\fR description
+Profile Description string (Default "inoutfile")
+.TP
+\fB\-C\fR copyright
+Copyright string
+.TP
+\fB\-V\fR
+Verify existing profile, rather than link
+.TP
+\fB\-q\fR lmhu
+Quality \- Low, Medium (def), High, Ultra
+.TP
+\fB\-r\fR res
+Override clut res. set by \fB\-q\fR
+.TP
+\fB\-n\fR
+Don't preserve device linearization curves in result
+.TP
+\fB\-f\fR
+Special :\- Force neutral colors to be K only output
+.TP
+\fB\-fk\fR
+Special :\- Force K only neutral colors to be K only output
+.TP
+\fB\-F\fR
+Special :\- Force all colors to be K only output
+.TP
+\fB\-fcmy\fR
+Special :\- Force 100% C,M or Y only to stay pure
+.TP
+\fB\-p\fR absprof
+Include abstract profile in link
+.TP
+\fB\-a\fR file.cal
+Apply calibration curves to link output and append linear
+.TP
+\fB\-H\fR file.cal
+Append calibration curves to 3dlut
+.TP
+\fB\-s\fR
+Simple Mode (default)
+.TP
+\fB\-g\fR [src.gam]
+Gamut Mapping Mode [optional source image gamut]
+.TP
+\fB\-G\fR [src.gam]
+Gamut Mapping Mode using inverse outprofile A2B
+.IP
+Simple Mode Options:
+\fB\-i\fR in_intent p = perceptual, r = relative colorimetric,
+.IP
+s = saturation, a = absolute colorimetric
+.TP
+\fB\-o\fR out_intent
+p = perceptual, r = relative colorimetric,
+s = saturation, a = absolute colorimetric
+.TP
+Gamut Mapping
+Mode Options:
+.TP
+\fB\-i\fR intent
+set linking intent from the following choice:
+.IP
+a \- Absolute Colorimetric (in Jab) [ICC Absolute Colorimetric]
+.IP
+aw \- Absolute Colorimetric (in Jab) with scaling to fit white point
+aa \- Absolute Appearance
+.IP
+r \- White Point Matched Appearance [ICC Relative Colorimetric]
+.IP
+la \- Luminance axis matched Appearance
+.IP
+p \- Perceptual (Preferred) (Default) [ICC Perceptual]
+.IP
+pa \- Perceptual Apperance
+ms \- Saturation
+.IP
+s \- Enhanced Saturation [ICC Saturation]
+.IP
+al \- Absolute Colorimetric (Lab)
+rl \- White Point Matched Colorimetric (Lab)
+.TP
+\fB\-w\fR [J,a,b]
+Use forced whitepoint hack [optional target point]
+.TP
+\fB\-c\fR viewcond
+set source viewing conditions for CIECAM02,
+either an enumerated choice, or a parameter
+.TP
+\fB\-d\fR viewcond
+set destination viewing conditions for CIECAM02,
+either an enumerated choice, or parameter:value changes
+.IP
+pp \- Practical Reflection Print (ISO\-3664 P2)
+pe \- Print evaluation environment (CIE 116\-1995)
+pc \- Critical print evaluation environment (ISO\-3664 P1)
+mt \- Monitor in typical work environment
+mb \- Bright monitor in bright work environment
+md \- Monitor in darkened work environment
+jm \- Projector in dim environment
+jd \- Projector in dark environment
+tv \- Television/Film Studio
+.IP
+pcd \- Photo CD \- original scene outdoors
+.IP
+ob \- Original scene \- Bright Outdoors
+cx \- Cut Sheet Transparencies on a viewing box
+.TP
+s:surround
+n = auto, a = average, m = dim, d = dark,
+c = transparency (default average)
+.TP
+w:X:Y:Z
+Adapted white point as XYZ (default media white)
+.TP
+w:x:y
+Adapted white point as x, y
+.TP
+a:adaptation
+Adaptation luminance in cd.m^2 (default 50.0)
+.TP
+b:background
+Background % of image luminance (default 20)
+.TP
+l:imagewhite
+Image white in cd.m^2 if surround = auto (default 250)
+.TP
+f:flare
+Flare light % of image luminance (default 0)
+.TP
+g:glare
+Flare light % of ambient (default 1)
+.TP
+g:X:Y:Z
+Flare color as XYZ (default media white, Abs: D50)
+.TP
+g:x:y
+Flare color as x, y
+.TP
+\fB\-t\fR tlimit
+set source total ink limit, 0 \- 400% (estimate by default)
+.TP
+\fB\-T\fR klimit
+set source black ink limit, 0 \- 100% (estimate by default)
+.IP
+Inverse outprofile A2B Options:
+\fB\-k\fR tezhxr CMYK Black generation
+.IP
+t = transfer K from source to destination, e = retain K of destination B2A table
+z = zero K, h = 0.5 K, x = maximum K, r = ramp K (default)
+.HP
+\fB\-k\fR p stle stpo enpo enle shape
+.IP
+p = black target generation curve parameters
+.HP
+\fB\-k\fR q stle0 stpo0 enpo0 enle0 shape0 stle2 stpo2 enpo2 enle2 shape2
+.IP
+q = transfer source K to dual curve limits
+.TP
+\fB\-K\fR parameters
+Same as \fB\-k\fR, but target is K locus rather than K value itself
+.TP
+\fB\-l\fR tlimit
+set destination total ink limit, 0 \- 400% (estimate by default)
+.TP
+\fB\-L\fR klimit
+set destination black ink limit, 0 \- 100% (estimate by default)
+.TP
+\fB\-3\fR flag
+Create "3DLut" output file as well as devlink
+.TP
+e
+eeColor .txt file
+.TP
+m
+MadVR .3dlut file
+.TP
+\fB\-I\fR b
+Apply BT.1886\-like mapping with effective gamma 2.2 to input
+.TP
+\fB\-I\fR b:g.g
+Apply BT.1886\-like mapping with effective gamma g.g to input
+.TP
+\fB\-I\fR B
+Apply BT.1886 mapping with technical gamma 2.4 to input
+.TP
+\fB\-I\fR B:g.g
+Apply BT.1886 mapping with technical gamma g.g to input
+.TP
+\fB\-e\fR flag
+Video encode input as:
+.TP
+\fB\-E\fR flag
+Video encode output as:
+.TP
+n
+normal 0..1 full range RGB levels (default)
+.TP
+t
+(16\-235)/255 "TV" RGB levels
+.TP
+6
+Rec601 YCbCr SD (16\-235,240)/255 "TV" levels
+.TP
+7
+Rec709 1125/60Hz YCbCr HD (16\-235,240)/255 "TV" levels
+.TP
+5
+Rec709 1250/50Hz YCbCr HD (16\-235,240)/255 "TV" levels
+.TP
+2
+Rec2020 YCbCr UHD (16\-235,240)/255 "TV" levels
+.TP
+C
+Rec2020 Constant Luminance YCbCr UHD (16\-235,240)/255 "TV" levels
+.TP
+x
+xvYCC Rec601 YCbCr Rec709 Prims. SD (16\-235,240)/255 "TV" levels
+.TP
+X
+xvYCC Rec709 YCbCr Rec709 Prims. HD (16\-235,240)/255 "TV" levels
+.TP
+\fB\-P\fR
+Create gamut gammap.wrl diagostic
diff --git a/debian/man/colprof.1 b/debian/man/colprof.1
new file mode 100644
index 0000000..cf8b9b1
--- /dev/null
+++ b/debian/man/colprof.1
@@ -0,0 +1,186 @@
+.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1.
+.TH CREATE "1" "September 2014" "colprof" "User Commands"
+.SH NAME
+Create \- Create ICC profile.
+.SH DESCRIPTION
+Create ICC profile
+.SH SYNOPSIS
+.B colprof
+.RB [\-options]\ inoutfile
+.TP
+\fB\-v\fR
+Verbose mode
+.HP
+\fB\-A\fR manufacturer Manufacturer description string
+.TP
+\fB\-M\fR model
+Model description string
+.TP
+\fB\-D\fR description
+Profile Description string (Default "inoutfile")
+.TP
+\fB\-C\fR copyright
+Copyright string
+.TP
+\fB\-Z\fR tmnb
+Attributes: Transparency, Matte, Negative, BlackAndWhite
+.TP
+\fB\-Z\fR prsa
+Default intent: Perceptual, Rel. Colorimetric, Saturation, Abs. Colorimetric
+.TP
+\fB\-q\fR lmhu
+Quality \- Low, Medium (def), High, Ultra
+.TP
+\fB\-b\fR [lmhun]
+Low quality B2A table \- or specific B2A quality or none for input device
+.TP
+\fB\-ni\fR
+Don't create input (Device) shaper curves
+.TP
+\fB\-np\fR
+Don't create input (Device) grid position curves
+.TP
+\fB\-no\fR
+Don't create output (PCS) shaper curves
+.TP
+\fB\-nc\fR
+Don't put the input .ti3 data in the profile
+.TP
+\fB\-k\fR zhxr
+Black value target: z = zero K,
+h = 0.5 K, x = max K, r = ramp K (def.)
+.HP
+\fB\-k\fR p stle stpo enpo enle shape
+.IP
+stle: K level at White 0.0 \- 1.0
+stpo: start point of transition Wh 0.0 \- Bk 1.0
+enpo: End point of transition Wh 0.0 \- Bk 1.0
+enle: K level at Black 0.0 \- 1.0
+shape: 1.0 = straight, 0.0\-1.0 concave, 1.0\-2.0 convex
+.TP
+\fB\-K\fR parameters
+Same as \fB\-k\fR, but target is K locus rather than K value itself
+.TP
+\fB\-l\fR tlimit
+override total ink limit, 0 \- 400% (default from .ti3)
+.TP
+\fB\-L\fR klimit
+override black ink limit, 0 \- 100% (default from .ti3)
+.TP
+\fB\-a\fR lxXgsmGS
+Algorithm type override
+l = Lab cLUT (def.), x = XYZ cLUT, X = display XYZ cLUT + matrix
+g = gamma+matrix, s = shaper+matrix, m = matrix only,
+G = single gamma+matrix, S = single shaper+matrix
+.TP
+\fB\-u\fR
+If input profile, auto scale WP to allow extrapolation
+.TP
+\fB\-uc\fR
+If input profile, clip cLUT values above WP
+.TP
+\fB\-U\fR scale
+If input profile, scale media white point by scale
+.TP
+\fB\-R\fR
+Restrict white <= 1.0, black and primaries to be +ve
+.TP
+\fB\-V\fR demphasis
+Degree of dark region cLUT grid emphasis 1.0\-4.0 (default 1.00 = none)
+.TP
+\fB\-f\fR [illum]
+Use Fluorescent Whitening Agent compensation [opt. simulated inst. illum.:
+.IP
+M0, M1, M2, A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp]
+.TP
+\fB\-i\fR illum
+Choose illuminant for computation of CIE XYZ from spectral data & FWA:
+.IP
+A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp
+.TP
+\fB\-o\fR observ
+Choose CIE Observer for spectral data:
+.IP
+1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2
+.TP
+\fB\-r\fR avgdev
+Average deviation of device+instrument readings as a percentage (default 0.50%)
+.TP
+\fB\-s\fR src.icc
+Apply gamut mapping to output profile perceptual B2A table for given source space
+.TP
+\fB\-S\fR src.icc
+Apply gamut mapping to output profile perceptual and saturation B2A table
+.TP
+\fB\-nP\fR
+Use colormetric source gamut to make output profile perceptual table
+.TP
+\fB\-nS\fR
+Use colormetric source gamut to make output profile saturation table
+.TP
+\fB\-g\fR src.gam
+Use source image gamut as well for output profile gamut mapping
+.TP
+\fB\-p\fR absprof,...
+Incorporate abstract profile(s) into output tables
+.TP
+\fB\-t\fR intent
+Override gamut mapping intent for output profile perceptual table:
+.TP
+\fB\-T\fR intent
+Override gamut mapping intent for output profile saturation table:
+.IP
+a \- Absolute Colorimetric (in Jab) [ICC Absolute Colorimetric]
+.IP
+aw \- Absolute Colorimetric (in Jab) with scaling to fit white point
+aa \- Absolute Appearance
+.IP
+r \- White Point Matched Appearance [ICC Relative Colorimetric]
+.IP
+la \- Luminance axis matched Appearance
+.IP
+p \- Perceptual (Preferred) (Default) [ICC Perceptual]
+.IP
+pa \- Perceptual Apperance
+ms \- Saturation
+.IP
+s \- Enhanced Saturation [ICC Saturation]
+.IP
+al \- Absolute Colorimetric (Lab)
+rl \- White Point Matched Colorimetric (Lab)
+.TP
+\fB\-c\fR viewcond
+set input viewing conditions for output profile CIECAM02 gamut mapping,
+.IP
+either an enumerated choice, or a parameter
+.TP
+\fB\-d\fR viewcond
+set output viewing conditions for output profile CIECAM02 gamut mapping
+.IP
+either an enumerated choice, or a parameter
+Also sets out of gamut clipping CAM space.
+either an enumerated choice, or a series of parameters:value changes
+.IP
+pp \- Practical Reflection Print (ISO\-3664 P2)
+pe \- Print evaluation environment (CIE 116\-1995)
+pc \- Critical print evaluation environment (ISO\-3664 P1)
+mt \- Monitor in typical work environment
+mb \- Bright monitor in bright work environment
+md \- Monitor in darkened work environment
+jm \- Projector in dim environment
+jd \- Projector in dark environment
+tv \- Television/Film Studio
+.IP
+pcd \- Photo CD \- original scene outdoors
+.IP
+ob \- Original scene \- Bright Outdoors
+cx \- Cut Sheet Transparencies on a viewing box
+.TP
+\fB\-P\fR
+Create gamut gammap_p.wrl and gammap_s.wrl diagostics
+.TP
+\fB\-O\fR outputfile
+Override the default output filename.
+.TP
+inoutfile
+Base name for input.ti3/output.icc file
diff --git a/debian/man/colverify.1 b/debian/man/colverify.1
new file mode 100644
index 0000000..392d8f0
--- /dev/null
+++ b/debian/man/colverify.1
@@ -0,0 +1,68 @@
+.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1.
+.TH VERIFY "1" "September 2014" "verfiy" "User Commands"
+.SH NAME
+Verify \- Verify CIE values.
+.SH DESCRIPTION
+Verify CIE values
+.SH SYNOPSIS
+.B verify
+.RB [\-options]\ target.ti3\ measured.ti3
+.TP
+\fB\-v\fR [n]
+Verbose mode, n >= 2 print each value
+.TP
+\fB\-n\fR
+Normalise each files reading to its white Y
+.TP
+\fB\-N\fR
+Normalise each files reading to its white XYZ
+.TP
+\fB\-m\fR
+Normalise each files reading to its white X+Y+Z
+.TP
+\fB\-D\fR
+Use D50 100.0 as L*a*b* white reference
+.TP
+\fB\-c\fR
+Show CIE94 delta E values
+.TP
+\fB\-k\fR
+Show CIEDE2000 delta E values
+.TP
+\fB\-s\fR
+Sort patch values by error
+.TP
+\fB\-w\fR
+create VRML vector visualisation (measured.wrl)
+.TP
+\fB\-W\fR
+create VRML marker visualisation (measured.wrl)
+.TP
+\fB\-x\fR
+Use VRML axes
+.TP
+\fB\-f\fR [illum]
+Use Fluorescent Whitening Agent compensation [opt. simulated inst. illum.:
+.IP
+M0, M1, M2, A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp]
+.TP
+\fB\-i\fR illum
+Choose illuminant for computation of CIE XYZ from spectral data & FWA:
+.IP
+A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp
+.TP
+\fB\-o\fR observ
+Choose CIE Observer for spectral data:
+1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2
+.TP
+\fB\-L\fR profile.icc
+Skip any first file out of profile gamut patches
+.TP
+\fB\-X\fR file.ccmx
+Apply Colorimeter Correction Matrix to second file
+.TP
+target.ti3
+Target (reference) PCS or spectral values.
+.TP
+measured.ti3
+Measured (actual) PCS or spectral values
diff --git a/debian/man/dispcal.1 b/debian/man/dispcal.1
new file mode 100644
index 0000000..20e9442
--- /dev/null
+++ b/debian/man/dispcal.1
@@ -0,0 +1,156 @@
+.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1.
+.TH CALIBRATE "1" "September 2014" "dispcal" "User Commands"
+.SH NAME
+Calibrate \- Calibrate a Display.
+.SH DESCRIPTION
+Calibrate a Display
+.SH SYNOPSIS
+.B dispcal
+.RB [options]\ outfile
+.TP
+\fB\-v\fR [n]
+Verbose mode
+.HP
+\fB\-display\fR displayname Choose X11 display name
+.TP
+\fB\-d\fR n[,m]
+Choose the display n from the following list (default 1)
+Optionally choose different display m for VideoLUT access
+.IP
+1 = 'Screen 1, Output DVI\-I\-1 at 0, 0, width 1920, height 1080'
+.TP
+\fB\-dweb[\fR:port]
+Display via a web server at port (default 8080)
+.TP
+\fB\-c\fR listno
+Set communication port from the following list (default 1)
+.IP
+** No ports found **
+.TP
+\fB\-r\fR
+Report on the calibrated display then exit
+.TP
+\fB\-R\fR
+Report on the uncalibrated display then exit
+.TP
+\fB\-m\fR
+Skip adjustment of the monitor controls
+.TP
+\fB\-o\fR [profile.icc]
+Create fast matrix/shaper profile [different filename to outfile.icc]
+.TP
+\fB\-O\fR "description"
+Fast ICC Profile Description string (Default "outfile")
+.TP
+\fB\-u\fR
+Update previous calibration and (if \fB\-o\fR used) ICC profile VideoLUTs
+.TP
+\fB\-q\fR [vlmh]
+Quality \- Very Low, Low, Medium (def), High
+.TP
+\fB\-p\fR
+Use telephoto mode (ie. for a projector) (if available)
+.TP
+\fB\-t\fR [temp]
+White Daylight locus target, optional target temperaturee in deg. K (deflt.)
+.TP
+\fB\-T\fR [temp]
+White Black Body locus target, optional target temperaturee in deg. K
+.TP
+\fB\-w\fR x,y
+Set the target white point as chromaticity coordinates
+.TP
+\fB\-b\fR bright
+Set the target white brightness in cd/m^2
+.TP
+\fB\-g\fR gamma
+Set the target response curve advertised gamma (Def. 2.4)
+Use "\-gl" for L*a*b* curve
+Use "\-gs" for sRGB curve
+Use "\-g709" for REC 709 curve (should use \fB\-a\fR as well!)
+Use "\-g240" for SMPTE 240M curve (should use \fB\-a\fR as well!)
+Use "\-G2.4 \fB\-f0\fR" for BT.1886
+.TP
+\fB\-G\fR gamma
+Set the target response curve actual technical gamma
+.TP
+\fB\-f\fR [degree]
+Amount of black level accounted for with output offset (default all output offset)
+.TP
+\fB\-a\fR ambient
+Use viewing condition adjustment for ambient in Lux
+.TP
+\fB\-k\fR factor
+Amount to correct black hue, 0 = none, 1 = full, Default = Automatic
+.TP
+\fB\-A\fR rate
+Rate of blending from neutral to black point. Default 4.0
+.TP
+\fB\-B\fR blkbright
+Set the target black brightness in cd/m^2
+.TP
+\fB\-e\fR [n]
+Run n verify passes on final curves
+.TP
+\fB\-z\fR
+Run only verify pass on installed calibration curves
+.TP
+\fB\-P\fR ho,vo,ss[,vs]
+Position test window and scale it
+ho,vi: 0.0 = left/top, 0.5 = center, 1.0 = right/bottom etc.
+ss: 0.5 = half, 1.0 = normal, 2.0 = double etc.
+.TP
+\fB\-F\fR
+Fill whole screen with black background
+.TP
+\fB\-n\fR
+Don't set override redirect on test window
+.TP
+\fB\-E\fR
+Encode the test values for video range 16..235/255
+.TP
+\fB\-J\fR
+Run instrument calibration first (used rarely)
+.TP
+\fB\-N\fR
+Disable initial calibration of instrument if possible
+.TP
+\fB\-H\fR
+Use high resolution spectrum mode (if available)
+.TP
+\fB\-X\fR file.ccmx
+Apply Colorimeter Correction Matrix
+.TP
+\fB\-X\fR file.ccss
+Use Colorimeter Calibration Spectral Samples for calibration
+.TP
+\fB\-Q\fR observ
+Choose CIE Observer for spectrometer or CCSS colorimeter data:
+1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2, 1964_10c
+.TP
+\fB\-I\fR b|w
+Drift compensation, Black: \fB\-Ib\fR, White: \fB\-Iw\fR, Both: \fB\-Ibw\fR
+.TP
+\fB\-Y\fR R:rate
+Override measured refresh rate with rate Hz
+.TP
+\fB\-Y\fR A
+Use non\-adaptive integration time mode (if available).
+.TP
+\fB\-Y\fR p
+Don't wait for the instrument to be placed on the display
+.TP
+\fB\-C\fR "command"
+Invoke shell "command" each time a color is set
+.TP
+\fB\-M\fR "command"
+Invoke shell "command" each time a color is measured
+.TP
+\fB\-W\fR n|h|x
+Override serial port flow control: n = none, h = HW, x = Xon/Xoff
+.TP
+\fB\-D\fR [level]
+Print debug diagnostics to stderr
+.TP
+inoutfile
+Base name for created or updated .cal and .icc output files
diff --git a/debian/man/dispread.1 b/debian/man/dispread.1
new file mode 100644
index 0000000..a19b8c7
--- /dev/null
+++ b/debian/man/dispread.1
@@ -0,0 +1,103 @@
+.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1.
+.TH READ "1" "September 2014" "dispread" "User Commands"
+.SH NAME
+Read \- Read a Display.
+.SH DESCRIPTION
+Read a Display
+.SH SYNOPSIS
+.B dispread
+.RB [options]\ outfile
+.TP
+\fB\-v\fR
+Verbose mode
+.HP
+\fB\-display\fR displayname Choose X11 display name
+.TP
+\fB\-d\fR n[,m]
+Choose the display n from the following list (default 1)
+Optionally choose different display m for VideoLUT access
+.IP
+1 = 'Screen 1, Output DVI\-I\-1 at 0, 0, width 1920, height 1080'
+.TP
+\fB\-dweb[\fR:port]
+Display via a web server at port (default 8080)
+.TP
+\fB\-c\fR listno
+Set communication port from the following list (default 1)
+.IP
+** No ports found **
+.TP
+\fB\-p\fR
+Use telephoto mode (ie. for a projector) (if available)
+.TP
+\fB\-k\fR file.cal
+Load calibration file into display while reading
+.TP
+\fB\-K\fR file.cal
+Apply calibration file to test values while reading
+.TP
+\fB\-s\fR
+Save spectral information (default don't save)
+.TP
+\fB\-P\fR ho,vo,ss[,vs]
+Position test window and scale it
+ho,vi: 0.0 = left/top, 0.5 = center, 1.0 = right/bottom etc.
+ss: 0.5 = half, 1.0 = normal, 2.0 = double etc.
+.TP
+\fB\-F\fR
+Fill whole screen with black background
+.TP
+\fB\-n\fR
+Don't set override redirect on test window
+.TP
+\fB\-E\fR
+Encode the test values for video range 16..235/255
+.TP
+\fB\-J\fR
+Run instrument calibration first (used rarely)
+.TP
+\fB\-N\fR
+Disable initial calibration of instrument if possible
+.TP
+\fB\-H\fR
+Use high resolution spectrum mode (if available)
+.TP
+\fB\-w\fR
+Disable normalisation of white to Y = 100
+.TP
+\fB\-X\fR file.ccmx
+Apply Colorimeter Correction Matrix
+.TP
+\fB\-X\fR file.ccss
+Use Colorimeter Calibration Spectral Samples for calibration
+.TP
+\fB\-Q\fR observ
+Choose CIE Observer for spectrometer or CCSS colorimeter data:
+1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2, 1964_10c
+.TP
+\fB\-I\fR b|w
+Drift compensation, Black: \fB\-Ib\fR, White: \fB\-Iw\fR, Both: \fB\-Ibw\fR
+.TP
+\fB\-Y\fR R:rate
+Override measured refresh rate with rate Hz
+.TP
+\fB\-Y\fR A
+Use non\-adaptive integration time mode (if available).
+.TP
+\fB\-Y\fR p
+Don't wait for the instrument to be placed on the display
+.TP
+\fB\-C\fR "command"
+Invoke shell "command" each time a color is set
+.TP
+\fB\-M\fR "command"
+Invoke shell "command" each time a color is measured
+.TP
+\fB\-W\fR n|h|x
+Override serial port flow control: n = none, h = HW, x = Xon/Xoff
+.TP
+\fB\-D\fR [level]
+Print debug diagnostics to stderr
+.TP
+outfile
+Base name for input[ti1]/output[ti3] file
diff --git a/debian/man/dispwin.1 b/debian/man/dispwin.1
new file mode 100644
index 0000000..c4c7594
--- /dev/null
+++ b/debian/man/dispwin.1
@@ -0,0 +1,81 @@
+.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1.
+.TH TEST "1" "September 2014" "dispwin" "User Commands"
+.SH NAME
+Test \- Test display patch window, Set Video LUTs, Install profiles.
+.SH DESCRIPTION
+Test display patch window, Set Video LUTs, Install profiles
+.SH SYNOPSIS
+.B dispwin
+.RB [options]\ [calfile]
+.TP
+\fB\-v\fR
+Verbose mode
+.HP
+\fB\-display\fR displayname Choose X11 display name
+.TP
+\fB\-d\fR n[,m]
+Choose the display n from the following list (default 1)
+Optionally choose different display m for Video LUT access
+.IP
+1 = 'Screen 1, Output DVI\-I\-1 at 0, 0, width 1920, height 1080'
+.TP
+\fB\-dweb[\fR:port]
+Display via a web server at port (default 8080)
+.TP
+\fB\-P\fR ho,vo,ss[,vs]
+Position test window and scale it
+.TP
+\fB\-F\fR
+Fill whole screen with black background
+.TP
+\fB\-i\fR
+Run forever with random values
+.TP
+\fB\-G\fR filename
+Display RGB colors from CGATS file
+.TP
+\fB\-C\fR r.rr,g.gg,b.bb
+Add this RGB color to list to be displayed
+.TP
+\fB\-m\fR
+Manually cycle through values
+.TP
+\fB\-f\fR
+Test grey ramp fade
+.TP
+\fB\-r\fR
+Test just Video LUT loading & Beeps
+.TP
+\fB\-n\fR
+Test native output (rather than through Video LUT and C.M.)
+.TP
+\fB\-s\fR filename
+Save the currently loaded Video LUT to 'filename'
+.TP
+\fB\-c\fR
+Load a linear display calibration
+.TP
+\fB\-V\fR
+Verify that calfile/profile cal. is currently loaded in LUT
+.TP
+\fB\-I\fR
+Install profile for display and use it's calibration
+.TP
+\fB\-U\fR
+Un\-install profile for display
+.TP
+\fB\-S\fR d
+Specify the install/uninstall scope for OS X [nlu] or X11/Vista [lu]
+d is one of: n = network, l = local system, u = user (default)
+.TP
+\fB\-L\fR
+Load installed profiles cal. into Video LUT
+.TP
+\fB\-X\fR
+Run in daemon loader mode for given X11 server
+.TP
+\fB\-D\fR [level]
+Print debug diagnostics to stderr
+.TP
+calfile
+Load calibration (.cal or .icc) into Video LUT
diff --git a/debian/man/extracticc.1 b/debian/man/extracticc.1
new file mode 100644
index 0000000..9d5adad
--- /dev/null
+++ b/debian/man/extracticc.1
@@ -0,0 +1,12 @@
+.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1.
+.TH EXTRACT "1" "September 2014" "extracticc" "User Commands"
+.SH NAME
+Extract \- Extract an ICC profile from a TIFF file.
+.SH DESCRIPTION
+Extract an ICC profile from a TIFF or JPEG file
+.SH SYNOPSIS
+.B extracticc
+.RB [\-v]\ infile.(tif|jpg)\ outfile.icc
+.TP
+\fB\-v\fR
+Verbose
diff --git a/debian/man/extractttag.1 b/debian/man/extractttag.1
new file mode 100644
index 0000000..eac947a
--- /dev/null
+++ b/debian/man/extractttag.1
@@ -0,0 +1,18 @@
+.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1.
+.TH EXTRACT "1" "September 2014" "extractttag" "User Commands"
+.SH NAME
+Extract \- Extract a text tag from an ICC profile.
+.SH DESCRIPTION
+Extract a text tag from an ICC profile
+.SH SYNOPSIS
+.B extractttag
+.RB [\-v]\ infile.icc\ outfile
+.TP
+\fB\-v\fR
+Verbose
+.TP
+\fB\-t\fR tag
+Extract this tag rather than default 'targ'
+.TP
+\fB\-c\fR
+Extract calibration file from 'targ' tag
diff --git a/debian/man/fakeCMY.1 b/debian/man/fakeCMY.1
new file mode 100644
index 0000000..6509ad6
--- /dev/null
+++ b/debian/man/fakeCMY.1
@@ -0,0 +1,21 @@
+.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1.
+.TH CREATE "1" "September 2014" "fakeCMY" "User Commands"
+.SH NAME
+Create \- Create a fake CMY data file from a CMYK profile.
+.SH DESCRIPTION
+Create a fake CMY data file from a CMYK profile
+.SH SYNOPSIS
+.B fakeCMY
+.RB [option]\ profile.icm\ fake.ti3
+.TP
+\fB\-v\fR
+verbose
+.TP
+\fB\-r\fR res
+set surface point resolution (default 3)
+.TP
+\fB\-l\fR tlimit
+set total ink limit, 0 \- 400% (estimate by default)
+.TP
+\fB\-L\fR klimit
+set black ink limit, 0 \- 100% (estimate by default)
diff --git a/debian/man/fakeread.1 b/debian/man/fakeread.1
new file mode 100644
index 0000000..1af12e0
--- /dev/null
+++ b/debian/man/fakeread.1
@@ -0,0 +1,90 @@
+.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1.
+.TH FAKE "1" "September 2014" "fakeread" "User Commands"
+.SH NAME
+Fake \- Fake test chart reader - lookup values in ICC/MPP profile.
+.SH DESCRIPTION
+Fake test chart reader \- lookup values in ICC/MPP profile
+.SH SYNOPSIS
+.B fakeread
+.RB [\-options]\ profile.[icc|mpp|ti3]\ outfile
+.TP
+\fB\-v\fR [n]
+Verbose mode [level]
+.TP
+\fB\-e\fR flag
+Video encode device input to sepration as:
+.TP
+n
+normal 0..1 full range RGB levels (default)
+.TP
+t
+(16\-235)/255 "TV" RGB levels
+.TP
+6
+Rec601 YCbCr SD (16\-235,240)/255 "TV" levels
+.TP
+7
+Rec709 1125/60Hz YCbCr HD (16\-235,240)/255 "TV" levels
+.TP
+5
+Rec709 1250/50Hz YCbCr HD (16\-235,240)/255 "TV" levels
+.TP
+2
+Rec2020 YCbCr UHD (16\-235,240)/255 "TV" levels
+.TP
+C
+Rec2020 Constant Luminance YCbCr UHD (16\-235,240)/255 "TV" levels
+.HP
+\fB\-p\fR separation.icc Use device link separation profile on input
+.TP
+\fB\-E\fR flag
+Video decode separation device output. See \fB\-e\fR above
+.TP
+\fB\-k\fR file.cal
+Apply calibration (include in .ti3 output)
+.TP
+\fB\-i\fR file.cal
+Include calibration in .ti3 output, but don't apply it
+.TP
+\fB\-K\fR file.cal
+Apply inverse calibration
+.TP
+\fB\-r\fR level
+Add average random deviation of <level>% to device values (after sep. & cal.)
+.TP
+\fB\-0\fR pow
+Apply power to device chanel 0\-9
+.TP
+\fB\-b\fR output.icc
+Apply BT.1886\-like mapping with effective gamma 2.2
+.HP
+\fB\-b\fR g.g:output.icc Apply BT.1886\-like mapping with effective gamma g.g
+.TP
+\fB\-B\fR output.icc
+Apply BT.1886 mapping with technical gamma 2.4
+.HP
+\fB\-B\fR g.g:output.icc Apply BT.1886 mapping with technical gamma g.g
+.TP
+\fB\-I\fR intent
+r = relative colorimetric, a = absolute (default)
+.TP
+\fB\-A\fR L,a,b
+Scale black point to target Lab value
+.TP
+\fB\-l\fR
+Output Lab rather than XYZ
+.TP
+\fB\-s\fR
+Lookup MPP spectral values
+.TP
+\fB\-R\fR level
+Add average random deviation of <level>% to output PCS values
+.TP
+\fB\-u\fR
+Make random deviations have uniform distributions rather than normal
+.TP
+\fB\-S\fR seed
+Set random seed
+.IP
+profile.[icc|mpp|ti3] ICC, MPP profile or TI3 to use
+outfile Base name for input[ti1]/output[ti3] file
diff --git a/debian/man/greytiff.1 b/debian/man/greytiff.1
new file mode 100644
index 0000000..f1b71d6
--- /dev/null
+++ b/debian/man/greytiff.1
@@ -0,0 +1,18 @@
+.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1.
+.TH CONVERT "1" "September 2014" "greytiff" "User Commands"
+.SH NAME
+Convert \- Convert a TIFF file to monochrome using an ICC device profile.
+.SH DESCRIPTION
+Convert a TIFF file to monochrome using an ICC device profile
+.SH SYNOPSIS
+.B greytiff
+.RB [\-v\ level]\ profile.icm\ infile.tif\ outfile.tif
+.TP
+\fB\-v\fR
+Verbose
+.TP
+\fB\-p\fR
+Use slow precise correction
+.TP
+\fB\-j\fR
+Use CIECAM02
diff --git a/debian/man/iccdump.1 b/debian/man/iccdump.1
new file mode 100644
index 0000000..e508f13
--- /dev/null
+++ b/debian/man/iccdump.1
@@ -0,0 +1,21 @@
+.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1.
+.TH DUMP "1" "September 2014" "iccdump" "User Commands"
+.SH NAME
+Dump \- Dump an ICC file in human readable form.
+.SH DESCRIPTION
+Dump an ICC file in human readable form
+.SH SYNOPSIS
+.B iccdump
+.RB [\-v\ level]\ [\-t\ tagname]\ [\-s]\ infile
+.TP
+\fB\-v\fR level
+Verbose level 1\-3 (default 2)
+.TP
+\fB\-t\fR tag
+Dump this tag only (can be used multiple times)
+.TP
+\fB\-s\fR
+Search for embedded profile
+.TP
+\fB\-i\fR
+Check V4 ID value
diff --git a/debian/man/iccgamut.1 b/debian/man/iccgamut.1
new file mode 100644
index 0000000..2aa40ff
--- /dev/null
+++ b/debian/man/iccgamut.1
@@ -0,0 +1,97 @@
+.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1.
+.TH CREATE "1" "September 2014" "iccgamut" "User Commands"
+.SH NAME
+Create \- Create Lab/Jab gamut plot.
+.SH DESCRIPTION
+Create Lab/Jab gamut plot
+.SH SYNOPSIS
+.B iccgamut
+.RB [options]\ profile
+.TP
+\fB\-v\fR
+Verbose
+.TP
+\fB\-d\fR sres
+Surface resolution details 1.0 \- 50.0
+.TP
+\fB\-w\fR
+emit VRML .wrl file as well as CGATS .gam file
+.TP
+\fB\-n\fR
+Don't add VRML axes or white/black point
+.TP
+\fB\-k\fR
+Add VRML markers for prim. & sec. "cusp" points
+.TP
+\fB\-f\fR function
+f = forward*, b = backwards
+.TP
+\fB\-i\fR intent
+p = perceptual, r = relative colorimetric,
+s = saturation, a = absolute (default), d = profile default
+.TP
+\fB\-p\fR oride
+l = Lab_PCS (default), j = CIECAM02 Appearance Jab
+.TP
+\fB\-o\fR order
+n = normal (priority: lut > matrix > monochrome)
+r = reverse (priority: monochrome > matrix > lut)
+.TP
+\fB\-l\fR tlimit
+set total ink limit, 0 \- 400% (estimate by default)
+.TP
+\fB\-L\fR klimit
+set black ink limit, 0 \- 100% (estimate by default)
+.TP
+\fB\-c\fR viewcond
+set viewing conditions for CIECAM02,
+either an enumerated choice, or a series of parameter:value changes
+.IP
+pp \- Practical Reflection Print (ISO\-3664 P2)
+pe \- Print evaluation environment (CIE 116\-1995)
+pc \- Critical print evaluation environment (ISO\-3664 P1)
+mt \- Monitor in typical work environment
+mb \- Bright monitor in bright work environment
+md \- Monitor in darkened work environment
+jm \- Projector in dim environment
+jd \- Projector in dark environment
+tv \- Television/Film Studio
+.IP
+pcd \- Photo CD \- original scene outdoors
+.IP
+ob \- Original scene \- Bright Outdoors
+cx \- Cut Sheet Transparencies on a viewing box
+.TP
+s:surround
+n = auto, a = average, m = dim, d = dark,
+c = transparency (default average)
+.TP
+w:X:Y:Z
+Adapted white point as XYZ (default media white)
+.TP
+w:x:y
+Adapted white point as x, y
+.TP
+a:adaptation
+Adaptation luminance in cd.m^2 (default 50.0)
+.TP
+b:background
+Background % of image luminance (default 20)
+.TP
+l:imagewhite
+Image white in cd.m^2 if surround = auto (default 250)
+.TP
+f:flare
+Flare light % of image luminance (default 0)
+.TP
+g:glare
+Flare light % of ambient (default 1)
+.TP
+g:X:Y:Z
+Flare color as XYZ (default media white, Abs: D50)
+.TP
+g:x:y
+Flare color as x, y
+.TP
+\fB\-s\fR
+Create special cube surface topology plot
diff --git a/debian/man/icclu.1 b/debian/man/icclu.1
new file mode 100644
index 0000000..5cccdde
--- /dev/null
+++ b/debian/man/icclu.1
@@ -0,0 +1,34 @@
+.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1.
+.TH TRANSLATE "1" "September 2014" "icclu" "User Commands"
+.SH NAME
+Translate \- Translate colors through an ICC profile.
+.SH DESCRIPTION
+Translate colors through an ICC profile
+.SH SYNOPSIS
+.B icclu
+.RB [\-v\ level]\ [\-f\ func]\ [\-i\ intent]\ [\-o\ order]\ profile
+.TP
+\fB\-v\fR level
+Verbosity level 0 \- 2 (default = 1)
+.TP
+\fB\-f\fR function
+f = forward, b = backwards, g = gamut, p = preview
+.TP
+\fB\-i\fR intent
+p = perceptual, r = relative colorimetric,
+s = saturation, a = absolute
+.TP
+\fB\-p\fR oride
+x = XYZ_PCS, l = Lab_PCS, y = Yxy,
+.TP
+\fB\-o\fR order
+n = normal (priority: lut > matrix > monochrome)
+r = reverse (priority: monochrome > matrix > lut)
+.TP
+\fB\-s\fR scale
+Scale device range 0.0 \- scale rather than 0.0 \- 1.0
+.IP
+The colors to be translated should be fed into standard input,
+one input color per line, white space separated.
+A line starting with a # will be ignored.
+A line not starting with a number will terminate the program.
diff --git a/debian/man/illumread.1 b/debian/man/illumread.1
new file mode 100644
index 0000000..aaec8c3
--- /dev/null
+++ b/debian/man/illumread.1
@@ -0,0 +1,41 @@
+.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1.
+.TH MEASURE "1" "September 2014" "illumread" "User Commands"
+.SH NAME
+Measure \- Measure an illuminant.
+.SH DESCRIPTION
+Measure an illuminant
+.SH SYNOPSIS
+.B illumread
+.RB [\-options]\ output.sp
+.TP
+\fB\-v\fR
+Verbose mode
+.TP
+\fB\-S\fR
+Plot spectrum for each reading
+.TP
+\fB\-c\fR listno
+Choose instrument from the following list (default 1)
+.IP
+** No ports found **
+.TP
+\fB\-N\fR
+Disable initial calibration of instrument if possible
+.TP
+\fB\-H\fR
+Use high resolution spectrum mode (if available)
+.TP
+\fB\-Y\fR r
+Set refresh measurement mode
+.TP
+\fB\-Y\fR R:rate
+Override measured refresh rate with rate Hz
+.TP
+\fB\-W\fR n|h|x
+Override serial port flow control: n = none, h = HW, x = Xon/Xoff
+.TP
+\fB\-D\fR [level]
+Print debug diagnostics to stderr
+.TP
+illuminant.sp
+File to save measurement to
diff --git a/debian/man/invprofcheck.1 b/debian/man/invprofcheck.1
new file mode 100644
index 0000000..60d897b
--- /dev/null
+++ b/debian/man/invprofcheck.1
@@ -0,0 +1,45 @@
+.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1.
+.TH CHECK "1" "September 2014" "invprofcheck" "User Commands"
+.SH NAME
+Check \- Check fwd to bwd relative transfer of an ICC file.
+.SH DESCRIPTION
+Check fwd to bwd relative transfer of an ICC file
+.SH SYNOPSIS
+.B invprofcheck
+.RB [\-]\ profile.icm
+.TP
+\fB\-v\fR [level]
+verbosity level (default 1), 2 to print each DE
+.TP
+\fB\-l\fR limit
+set total ink limit (estimate by default)
+.TP
+\fB\-L\fR klimit
+set black channel ink limit (estimate by default)
+.TP
+\fB\-h\fR
+high res test (27)
+.TP
+\fB\-u\fR
+Ultra high res test (61)
+.TP
+\fB\-R\fR res
+Specific grid resolution
+.TP
+\fB\-c\fR
+Show CIE94 delta E values
+.TP
+\fB\-k\fR
+Show CIEDE2000 delta E values
+.TP
+\fB\-w\fR
+create VRML visualisation (profile.wrl)
+.TP
+\fB\-x\fR
+Use VRML axes
+.TP
+\fB\-e\fR
+Color vectors according to delta E
+.TP
+profile.icm
+Profile to check
diff --git a/debian/man/kodak2ti3.1 b/debian/man/kodak2ti3.1
new file mode 100644
index 0000000..45abd06
--- /dev/null
+++ b/debian/man/kodak2ti3.1
@@ -0,0 +1,24 @@
+.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1.
+.TH CONVERT "1" "September 2014" "kodak2ti3" "User Commands"
+.SH NAME
+Convert \- Convert Kodak raw printer profile data to Argyll print data.
+.SH DESCRIPTION
+Convert Kodak raw printer profile data to Argyll print data
+.SH SYNOPSIS
+.B kodak2ti3
+.RB [\-v]\ [\-l\ limit]\ infile\ outfile
+.TP
+\fB\-v\fR
+Verbose mode
+.TP
+\fB\-l\fR limit
+set ink limit, 0 \- 400%
+.TP
+\fB\-r\fR filename
+Use an alternate 928 patch reference file
+.TP
+infile
+Base name for input.pat file
+.TP
+outfile
+Base name for output.ti3 file
diff --git a/debian/man/ls2ti3.1 b/debian/man/ls2ti3.1
new file mode 100644
index 0000000..d7c7315
--- /dev/null
+++ b/debian/man/ls2ti3.1
@@ -0,0 +1,13 @@
+.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.46.6.
+.TH CONVERT "1" "May 2015" "Convert LightSpace raw RGB device profile data to Argyll CGATS data, Version 1.7.0" "User Commands"
+.SH NAME
+Convert \- Convert LightSpace raw RGB device profile data to Argyll CGATS data
+.SH DESCRIPTION
+Convert LightSpace raw RGB device profile data to Argyll CGATS data, Version 1.7.0
+Author: Graeme W. Gill, licensed under the AGPL Version 3
+.TP
+infile
+Input LightSpace .bcs file
+.TP
+outbasename
+Output file basename for .ti3
diff --git a/debian/man/mppcheck.1 b/debian/man/mppcheck.1
new file mode 100644
index 0000000..1cd6b16
--- /dev/null
+++ b/debian/man/mppcheck.1
@@ -0,0 +1,29 @@
+.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1.
+.TH CHECK "1" "September 2014" "mppcheck" "User Commands"
+.SH NAME
+Check \- Check Model Printer Profile.
+.SH DESCRIPTION
+Check Model Printer Profile
+.SH SYNOPSIS
+.B mppcheck
+.RB [\-v]\ [\-c]\ [\-s]\ [\-y]\ values.ti3\ profile.mpp
+.TP
+\fB\-v\fR
+Verbose mode
+.TP
+\fB\-c\fR
+Show CIE94 delta E values
+.TP
+\fB\-k\fR
+Show CIEDE2000 delta E values
+.TP
+\fB\-s\fR
+Check spectral model too
+.TP
+\fB\-y\fR
+Detail each value
+.TP
+values.ti3
+Test values to check against
+.IP
+profile.mpp Profile to check
diff --git a/debian/man/mpplu.1 b/debian/man/mpplu.1
new file mode 100644
index 0000000..5651f26
--- /dev/null
+++ b/debian/man/mpplu.1
@@ -0,0 +1,57 @@
+.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1.
+.TH TRANSLATE "1" "September 2014" "" "User Commands"
+.SH NAME
+Translate \- Translate colors through an MPP profile.
+.SH DESCRIPTION
+Translate colors through an MPP profile
+.SH SYNOPSIS
+.B mpplu
+.RB [\-v]\ [\-f\ func]\ [\-i\ intent]\ [\-o\ order]\ profile
+.TP
+\fB\-v\fR
+Verbose
+.TP
+\fB\-f\fR function
+f = forward, b = backwards
+.TP
+\fB\-p\fR oride
+x = XYZ_PCS, l = Lab_PCS, y = Yxy, s = spectral,
+.TP
+\fB\-l\fR limit
+override default ink limit, 1 \- N00%
+.TP
+\fB\-i\fR illum
+Choose illuminant for print/transparency spectral data:
+A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp
+.TP
+\fB\-o\fR observ
+Choose CIE Observer for spectral data:
+1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2
+.TP
+\fB\-u\fR
+Use Fluorescent Whitening Agent compensation
+.TP
+\fB\-g\fR
+Create gamut output
+.TP
+\fB\-w\fR
+Create gamut VRML as well
+.TP
+\fB\-n\fR
+Don't add VRML axes
+.TP
+\fB\-a\fR n
+Gamut transparency level
+.TP
+\fB\-d\fR n
+Gamut surface detail level
+.TP
+\fB\-t\fR num
+Invoke debugging test code "num" 1..n
+1 \- check partial derivative for device input
+2 \- create overlap diagnostic VRML gamut surface
+.IP
+The colors to be translated should be fed into stdin,
+one input color per line, white space separated.
+A line starting with a # will be ignored.
+A line not starting with a number will terminate the program.
diff --git a/debian/man/mppprof.1 b/debian/man/mppprof.1
new file mode 100644
index 0000000..13a18ef
--- /dev/null
+++ b/debian/man/mppprof.1
@@ -0,0 +1,30 @@
+.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1.
+.TH CREATE "1" "September 2014" "mppprof" "User Commands"
+.SH NAME
+Create \- Create Model Printer Profile.
+.SH DESCRIPTION
+Create Model Printer Profile
+.SH SYNOPSIS
+.B mppprof
+.RB [options]\ outfile
+.HP
+\fB\-v\fR [level] Verbose mode
+.HP
+\fB\-q\fR [lmhus] Quality \- Low, Medium (def), High, Ultra, Simple
+.TP
+\fB\-l\fR limit
+override default ink limit, 1 \- n00%
+.TP
+\fB\-s\fR
+Generate spectral model too
+.TP
+\fB\-m\fR
+Generate ink mixing model
+.HP
+\fB\-y\fR [level] Verify profile, 2 = read/write verify
+.TP
+\fB\-L\fR
+Output Lab values
+.TP
+outfile
+Base name for input.ti3/output.mpp file
diff --git a/debian/man/oeminst.1 b/debian/man/oeminst.1
new file mode 100644
index 0000000..ea56505
--- /dev/null
+++ b/debian/man/oeminst.1
@@ -0,0 +1,28 @@
+.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1.
+.TH INSTALL "1" "September 2014" "oeminst" "User Commands"
+.SH NAME
+Install \- List information about the FILEs.
+.SH DESCRIPTION
+Install OEM data files
+.SH SYNOPSIS
+.B oeminst
+.RB [\-options]\ [infile(s)]
+.TP
+\fB\-v\fR [level]
+Verbose
+.TP
+\fB\-n\fR
+Don't install, show where files would be installed
+.TP
+\fB\-c\fR
+Don't install, save files to current directory
+.TP
+\fB\-S\fR d
+Specify the install scope u = user (def.), l = local system]
+.TP
+infile
+setup.exe CD install file(s) or .dll(s) containing install files
+.TP
+infile.[edr|ccss|ccmx]
+EDR file(s) to translate and install or CCSS or CCMX files to install
+If no file is provided, oeminst will look for the install CD.
diff --git a/debian/man/printcal.1 b/debian/man/printcal.1
new file mode 100644
index 0000000..38038d6
--- /dev/null
+++ b/debian/man/printcal.1
@@ -0,0 +1,77 @@
+.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1.
+.TH CREATE "1" "September 2014" "printcal" "User Commands"
+.SH NAME
+Create \- Create printer calibration.
+.SH DESCRIPTION
+Create printer calibration
+.SH SYNOPSIS
+.B printcal
+.RB [\-options]\ [prevcal]\ inoutfile
+.TP
+\fB\-v\fR verbosity
+Verbose mode
+.TP
+\fB\-p\fR
+Plot graphs.
+.TP
+\fB\-i\fR
+Initial calibration, set targets, create .cal
+.TP
+\fB\-r\fR
+Re\-calibrate against previous .cal and create new .cal
+.TP
+\fB\-e\fR
+Verify against previous .cal
+.TP
+\fB\-I\fR
+Create imitation target from .ti3 and null calibration
+.TP
+\fB\-d\fR
+Go through the motions but don't write any files
+.TP
+\fB\-s\fR smoothing
+Extra curve smoothing (default 1.0)
+.HP
+\fB\-A\fR manufacturer Set the manufacturer description string
+.TP
+\fB\-M\fR model
+Set the model description string
+.TP
+\fB\-D\fR description
+Set the profile Description string
+.TP
+\fB\-C\fR copyright
+Set the copyright string
+.TP
+\fB\-x\fR# percent
+Set initial maximum device % target (override auto)
+.TP
+\fB\-m\fR# percent
+Set initial dev target to % of auto maximum
+.TP
+\fB\-n\fR# deltaE
+Set initial white minimum deltaE target
+.TP
+\fB\-t\fR# percent
+Set initial 50% transfer curve percentage target
+.TP
+# = c, r, 0
+First channel
+.TP
+m, g, 1
+Second channel
+.TP
+y, b, 2
+Third channel
+.TP
+k,
+3 Fourth channel, etc.
+.TP
+\fB\-a\fR
+Create an Adobe Photoshop .AMP file as well as a .cal
+.TP
+prevcal
+Base name of previous .cal file for recal or verify.
+.TP
+inoutname
+Base name of input .ti3 file, output .cal file
diff --git a/debian/man/printtarg.1 b/debian/man/printtarg.1
new file mode 100644
index 0000000..59ad2ba
--- /dev/null
+++ b/debian/man/printtarg.1
@@ -0,0 +1,125 @@
+.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1.
+.TH GENERATE "1" "September 2014" "printarg" "User Commands"
+.SH NAME
+Generate \- Generate Target PostScrip file.
+.SH DESCRIPTION
+Generate Target PostScrip file
+.SH SYNOPSIS
+.B printtarg
+.RB [\-v]\ [\-i\ instr]\ [\-r]\ [\-s]\ [\-p\ size]\ basename
+.TP
+\fB\-v\fR
+Verbose mode
+.HP
+\fB\-i\fR 20 | 22 | 41 | 51 | SS | i1 | CM Select target instrument (default DTP41)
+.IP
+20 = DTP20, 22 = DTP22, 41 = DTP41, 51 = DTP51,
+SS = SpectroScan, i1 = i1Pro, CM = ColorMunki
+.TP
+\fB\-h\fR
+Use hexagon patches for SS, double density for CM
+.TP
+\fB\-a\fR scale
+Scale patch size and spacers by factor (e.g. 0.857 or 1.5 etc.)
+.TP
+\fB\-A\fR scale
+Scale spacers by additional factor (e.g. 0.857 or 1.5 etc.)
+.TP
+\fB\-r\fR
+Don't randomize patch location
+.TP
+\fB\-s\fR
+Create a scan image recognition (.cht) file
+.TP
+\fB\-S\fR
+Same as \fB\-s\fR, but don't generate wide orientation strip.
+.TP
+\fB\-c\fR
+Force colored spacers
+.TP
+\fB\-b\fR
+Force B&W spacers
+.TP
+\fB\-n\fR
+Force no spacers
+.TP
+\fB\-f\fR
+Create PostScript DeviceN Color fallback
+.TP
+\fB\-w\fR g|r|s|n
+White colorspace encoding DeviceGray (def), DeviceRGB, Separation or DeviceN
+.TP
+\fB\-k\fR g|c|s|n
+Black colorspace encoding DeviceGray (def), DeviceCMYK, Separation or DeviceN
+.TP
+\fB\-o\fR k|r|n
+CMY colorspace encoding DefiveCMYK (def), inverted DeviceRGB or DeviceN
+.TP
+\fB\-e\fR
+Output EPS compatible file
+.TP
+\fB\-t\fR [res]
+Output 8 bit TIFF raster file, optional res DPI (default 100)
+.TP
+\fB\-T\fR [res]
+Output 16 bit TIFF raster file, optional res DPI (default 100)
+.TP
+\fB\-C\fR
+Don't use TIFF compression
+.TP
+\fB\-N\fR
+Use TIFF alpha N channels more than 4
+.TP
+\fB\-D\fR
+Dither 8 bit TIFF values down from 16 bit
+.TP
+\fB\-Q\fR nbits
+Quantize test values to fit in nbits
+.TP
+\fB\-R\fR rsnum
+Use given random start number
+.TP
+\fB\-K\fR file.cal
+Apply printer calibration to patch values and include in .ti2
+.TP
+\fB\-I\fR file.cal
+Include calibration in .ti2 (but don't apply it)
+.TP
+\fB\-x\fR pattern
+Use given strip indexing pattern (Default = "A\-Z, A\-Z")
+.TP
+\fB\-y\fR pattern
+Use given patch indexing pattern (Default = "0\-9,@\-9,@\-9;1\-999")
+.TP
+\fB\-m\fR margin
+Set a page margin in mm (default 6.0 mm)
+.TP
+\fB\-M\fR margin
+Set a page margin in mm and include it in TIFF
+.TP
+\fB\-P\fR
+Don't limit strip length
+.TP
+\fB\-L\fR
+Suppress any left paper clip border
+.TP
+\fB\-U\fR
+Suppress CUPS cupsJobTicket: cups\-disable\-cmm in PS & EPS files
+.TP
+\fB\-p\fR size
+Select page size from:
+A4 [210.0 x 297.0 mm]
+A4R [297.0 x 210.0 mm]
+A3 [297.0 x 420.0 mm] (default)
+A2 [420.0 x 594.0 mm]
+Letter [215.9 x 279.4 mm]
+LetterR [279.4 x 215.9 mm]
+Legal [215.9 x 355.6 mm]
+4x6 [101.6 x 152.4 mm]
+11x17 [279.4 x 431.8 mm]
+.TP
+\fB\-p\fR WWWxHHH
+Custom size, WWW mm wide by HHH mm high
+.TP
+basname
+Base name for input(.ti1), output(.ti2) and output(.ps/.eps/.tif)
diff --git a/debian/man/profcheck.1 b/debian/man/profcheck.1
new file mode 100644
index 0000000..683786a
--- /dev/null
+++ b/debian/man/profcheck.1
@@ -0,0 +1,61 @@
+.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1.
+.TH CHECK "1" "September 2014" "profcheck" "User Commands"
+.SH NAME
+Check \- Check accuracy of ICC profile.
+.SH DESCRIPTION
+Check accuracy of ICC profile, Version 1.6.3
+.SH SYNOPSIS
+.B profcheck
+.RB [\-options]\ data.ti3\ iccprofile.icm
+.TP
+\fB\-v\fR [level]
+Verbosity level (default 1), 2 to print each DE
+.TP
+\fB\-c\fR
+Show CIE94 delta E values
+.TP
+\fB\-k\fR
+Show CIEDE2000 delta E values
+.TP
+\fB\-w\fR
+create VRML visualisation (iccprofile.wrl)
+.TP
+\fB\-x\fR
+Use VRML axes
+.TP
+\fB\-m\fR
+Make VRML lines a minimum of 0.5
+.TP
+\fB\-e\fR
+Color vectors according to delta E
+.HP
+\fB\-d\fR devval1,deval2,devvalN
+.IP
+Specify a device value to sort against
+.TP
+\fB\-p\fR
+Sort device value by PCS (Lab) target
+.TP
+\fB\-f\fR [illum]
+Use Fluorescent Whitening Agent compensation [opt. simulated inst. illum.:
+.IP
+M0, M1, M2, A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp]
+.TP
+\fB\-i\fR illum
+Choose illuminant for computation of CIE XYZ from spectral data & FWA:
+.IP
+A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp
+.TP
+\fB\-o\fR observ
+Choose CIE Observer for spectral data:
+.IP
+1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2
+.TP
+\fB\-I\fR intent
+r = relative colorimetric, a = absolute (default)
+.TP
+data.ti3
+Test data file
+.TP
+iccprofile.icm
+Profile to check against
diff --git a/debian/man/refine.1 b/debian/man/refine.1
new file mode 100644
index 0000000..8c05df5
--- /dev/null
+++ b/debian/man/refine.1
@@ -0,0 +1,57 @@
+.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1.
+.TH CREATE "1" "September 2014" "refine" "User Commands"
+.SH NAME
+Create \- Create abstract correction profile given table of absolute CIE correction values.
+.SH DESCRIPTION
+Create abstract correction profile given table of absolute CIE correction values, Version 1.6.3
+.SH SYNOPSIS
+.B refine
+.RB [\-options]\ cietarget\ ciecurrent\ [outdevicc]\ [inabs]\ outabs
+.TP
+\fB\-v\fR
+Verbose
+.TP
+\fB\-c\fR
+Create initial abstract correction profile
+.TP
+\fB\-g\fR
+Don't impose output device gamut limit
+.TP
+\fB\-r\fR res
+Set abstract profile clut resolution (default 33)
+.TP
+\fB\-d\fR factor
+Override default damping factor (default 0.950000, then 0.700000)
+.TP
+\fB\-R\fR
+Aim for white point relative match rather than absolute
+.TP
+\fB\-f\fR [illum]
+Use Fluorescent Whitening Agent compensation [opt. simulated inst. illum.:
+.IP
+M0, M1, M2, A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp]
+.TP
+\fB\-i\fR illum
+Choose illuminant for computation of CIE XYZ from spectral data & FWA:
+.IP
+A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp
+.TP
+\fB\-o\fR observ
+Choose CIE Observer for spectral data:
+.IP
+1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2
+.TP
+cietarget
+Target CIE or spectral values, CGATS file (e.g. .ti3)
+.TP
+ciecurrent
+Actual CIE or spectral values, CGATS file (e.g. .ti3)
+.TP
+[outdevicc]
+Output device ICC profile to set gamut limit (not used if \fB\-g\fR)
+.TP
+[inabs]
+Previous abstract correction ICC profile (not used if \fB\-c\fR)
+.TP
+outabs
+Created/refined abstract correction ICC profile
diff --git a/debian/man/revfix.1 b/debian/man/revfix.1
new file mode 100644
index 0000000..b6cc94c
--- /dev/null
+++ b/debian/man/revfix.1
@@ -0,0 +1,49 @@
+.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1.
+.TH INVERT "1" "September 2014" "revfix" "User Commands"
+.SH NAME
+Invert \- Invert AtoB1 to make BtoA1 for CMYK profiles.
+.SH DESCRIPTION
+Invert AtoB1 to make BtoA1 for CMYK profiles, Version 1.6.3
+.SH SYNOPSIS
+.B revfix
+.RB [\-options]\ iccin\ iccout
+.TP
+\fB\-v\fR
+Verbose
+.TP
+\fB\-0\fR
+Process perceptual
+.TP
+\fB\-1\fR
+Process absolute/relative colorimetric
+.TP
+\fB\-2\fR
+Process saturation
+.TP
+\fB\-r\fR res
+Override BtoA1 Clut res
+.TP
+\fB\-k\fR [ezhxr]
+e = same K as existing BtoA table (def)
+z = zero, h = 0.5 K, x = max K, r = ramp K
+.HP
+\fB\-k\fR p stle stpo enle enpo shape
+.IP
+p = curve parameters
+stle: K level at White 0.0 \- 1.0
+stpo: start point of transition Wh 0.0 \- Bk 1.0
+enpo: End point of transition Wh 0.0 \- Bk 1.0
+enle: K level at Black 0.0 \- 1.0
+shape: 1.0 = straight, 0.0\-1.0 concave, 1.0\-2.0 convex
+.TP
+\fB\-K\fR parameters
+Same as \fB\-k\fR, but target is K locus rather than K value itself
+.TP
+\fB\-l\fR tlimit
+set total ink limit, 0 \- 400% (estimate by default)
+.TP
+\fB\-L\fR klimit
+set black ink limit, 0 \- 100% (estimate by default)
+.TP
+\fB\-p\fR absprof
+Include abstract profile in output tables
diff --git a/debian/man/scanin.1 b/debian/man/scanin.1
new file mode 100644
index 0000000..e1d0656
--- /dev/null
+++ b/debian/man/scanin.1
@@ -0,0 +1,114 @@
+.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1.
+.TH SCANIN, "1" "September 2014" "scanin" "User Commands"
+.SH NAME
+Scanin, \- Scanin.
+.SH DESCRIPTION
+Scanin, Version 1.6.3
+.SH SYNOPSIS
+.B scanin
+.RB [options]\ input.tif\ recogin.cht\ valin.cie\ [diag.tif]
+.IP
+:\- inputs 'input.tif' and outputs scanner 'input.ti3', or
+.PP
+.B scanin
+.RB \fB\-g\fR\ [options]\ input.tif\ recogout.cht\ [diag.tif]
+.IP
+:\- outputs file 'recogout.cht', or
+.PP
+.B scanin
+.RB \fB\-o\fR\ [options]\ input.tif\ recogin.cht\ [diag.tif]
+.IP
+:\- outputs file 'input.val', or
+.PP
+.B scanin
+.RB \fB\-c\fR\ [options]\ input.tif\ recogin.cht\ scanprofile.[icc|mpp]\ pbase\ [diag.tif]
+.IP
+:\- inputs pbase.ti2 and outputs printer pbase.ti3, or
+.PP
+.B scanin
+.RB \fB\-r\fR\ [options]\ input.tif\ recogin.cht\ pbase\ [diag.tif]
+.IP
+:\- inputs pbase.ti2+.ti3 and outputs pbase.ti3
+.TP
+\fB\-g\fR
+Generate a chart reference (.cht) file
+.TP
+\fB\-o\fR
+Output patch values in .val file
+.TP
+\fB\-c\fR
+Use image to measure color to convert printer pbase .ti2 to .ti3
+.TP
+\fB\-ca\fR
+Same as \fB\-c\fR, but accumulates more values to pbase .ti3
+from subsequent pages
+.TP
+\fB\-r\fR
+Replace device values in pbase .ti2/.ti3
+Default is to create a scanner .ti3 file
+.TP
+\fB\-F\fR x1,y1,x2,y2,x3,y3,x4,y4
+Don't auto recognize, locate using four fiducual marks
+.TP
+\fB\-p\fR
+Compensate for perspective distortion
+.TP
+\fB\-a\fR
+Recognise chart in normal orientation only (\fB\-A\fR fallback as is)
+Default is to recognise all possible chart angles
+.TP
+\fB\-m\fR
+Return true mean (default is robust mean)
+.TP
+\fB\-G\fR gamma
+Approximate gamma encoding of image
+.TP
+\fB\-v\fR [n]
+Verbosity level 0\-9
+.TP
+\fB\-d\fR [ihvglLIcrsonap]
+Generate diagnostic output (try \fB\-dipn\fR)
+.TP
+i
+diag \- B&W of input image
+.TP
+h
+diag \- Horizontal edge/tick detection
+.TP
+v
+diag \- Vertical edge/tick detection
+.TP
+g
+diag \- Groups detected
+.TP
+l
+diag \- Lines detected
+.TP
+L
+diag \- All lines detected
+.TP
+I
+diag \- lines used to improve fit
+.TP
+c
+diag \- lines perspective corrected
+.TP
+r
+diag \- lines rotated
+.TP
+s
+diag \- diagnostic sample boxes rotated
+.TP
+o
+diag \- sample box outlines
+.TP
+n
+diag \- sample box names
+.TP
+a
+diag \- sample box areas
+.TP
+p
+diag \- pixel areas sampled
+.HP
+\fB\-O\fR outputfile Override the default output filename & extension.
diff --git a/debian/man/spec2cie.1 b/debian/man/spec2cie.1
new file mode 100644
index 0000000..79f23b7
--- /dev/null
+++ b/debian/man/spec2cie.1
@@ -0,0 +1,47 @@
+.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1.
+.TH CONVERT "1" "September 2014" "spec2cie" "User Commands"
+.SH NAME
+Convert \- Convert spectral .ti3 file.
+.SH SYNOPSIS
+.B spec2cie
+[\fIoptions\fR] \fIinput.ti3 output.ti3\fR
+.SH DESCRIPTION
+Convert spectral .ti3 file, Version 1.6.3
+.SH SYNOPSIS
+.B spec2cie
+.RB [options]\ input.ti3\ output.ti3
+.TP
+\fB\-v\fR
+Verbose mode
+.TP
+\fB\-I\fR illum
+Override actual instrument illuminant in .ti3 file:
+.IP
+A, C, D50, D50M2, D65, F5, F8, F10 or file.sp
+(only used in conjunction with \fB\-f\fR)
+.TP
+\fB\-f\fR [illum]
+Use Fluorescent Whitening Agent compensation [simulated inst. illum.:
+.IP
+M0, M1, M2, A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp]
+.TP
+\fB\-i\fR illum
+Choose illuminant for computation of CIE XYZ from spectral data & FWA:
+A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp
+.TP
+\fB\-o\fR observ
+Choose CIE Observer for spectral data:
+.IP
+1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2
+.TP
+\fB\-n\fR
+Don't output spectral values
+.TP
+\fB\-p\fR
+Plot each values spectrum
+.TP
+input.ti3
+Measurement file
+.TP
+output.ti3
+Converted measurement file
diff --git a/debian/man/specplot.1 b/debian/man/specplot.1
new file mode 100644
index 0000000..d4426f3
--- /dev/null
+++ b/debian/man/specplot.1
@@ -0,0 +1,28 @@
+.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1.
+.TH PLOT "1" "September 2014" "specplot" "User Commands"
+.SH NAME
+Plot \- Plot spectrum and calculate CCT and VCT.
+.SH DESCRIPTION
+Plot spectrum and calculate CCT and VCT
+.SH SYNOPSIS
+.B specplot
+.RB [infile.sp]
+.TP
+\fB\-v\fR
+verbose
+.TP
+\fB\-c\fR
+combine multiple files into one plot
+.TP
+\fB\-z\fR
+don't make range cover zero
+.TP
+\fB\-u\fR level
+plot effect of adding estimated UV level
+.TP
+\fB\-U\fR
+plot effect of adding range of estimated UV level
+.TP
+[infile.sp ...]
+spectrum files to plot
+default is all built in illuminants
diff --git a/debian/man/splitti3.1 b/debian/man/splitti3.1
new file mode 100644
index 0000000..4be8b4e
--- /dev/null
+++ b/debian/man/splitti3.1
@@ -0,0 +1,33 @@
+.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1.
+.TH SPLIT "1" "September 2014" "splitcgats" "User Commands"
+.SH NAME
+Split \- Split a .ti3 into two.
+.SH DESCRIPTION
+Split a .ti3 into two, Version 1.6.3
+.SH SYNOPSIS
+.B splitcgats
+.RB [\-options]\ input.ti3\ output1.ti3\ output2.ti3
+.TP
+\fB\-v\fR
+Verbose \- print each patch value
+.TP
+\fB\-n\fR no
+Put no sets in first file, and balance in second file.
+.TP
+\fB\-p\fR percent
+Put percent% sets in first file, and balance in second file. (def. 50%)
+.TP
+\fB\-w\fR
+Put white patches in both files.
+.TP
+\fB\-r\fR seed
+Use given random seed.
+.TP
+input.ti3
+File to be split up.
+.TP
+output1.ti3
+First output file
+.TP
+output2.ti3
+Second output file
diff --git a/debian/man/spotread.1 b/debian/man/spotread.1
new file mode 100644
index 0000000..050f708
--- /dev/null
+++ b/debian/man/spotread.1
@@ -0,0 +1,123 @@
+.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1.
+.TH MEASURE "1" "September 2014" "spotread" "User Commands"
+.SH NAME
+Measure \- Read Print Spot values.
+.SH DESCRIPTION
+Measure spot values, Version 1.6.3
+.SH SYNOPSIS
+.B spotread
+.RB [\-options]\ [logfile]
+.TP
+\fB\-v\fR
+Verbose mode
+.TP
+\fB\-s\fR
+Print spectrum for each reading
+.TP
+\fB\-S\fR
+Plot spectrum for each reading
+.TP
+\fB\-c\fR listno
+Set communication port from the following list (default 1)
+.IP
+** No ports found **
+.TP
+\fB\-t\fR
+Use transmission measurement mode
+.TP
+\fB\-e\fR
+Use emissive measurement mode (absolute results)
+.TP
+\fB\-eb\fR
+Use display white brightness relative measurement mode
+.TP
+\fB\-ew\fR
+Use display white point relative chromatically adjusted mode
+.TP
+\fB\-p\fR
+Use telephoto measurement mode (absolute results)
+.TP
+\fB\-pb\fR
+Use projector white brightness relative measurement mode
+.TP
+\fB\-pw\fR
+Use projector white point relative chromatically adjusted mode
+.TP
+\fB\-a\fR
+Use ambient measurement mode (absolute results)
+.TP
+\fB\-f\fR
+Use ambient flash measurement mode (absolute results)
+.TP
+\fB\-I\fR illum
+Set simulated instrument illumination using FWA (def \fB\-i\fR illum):
+M0, M1, M2, A, C, D50, D50M2, D65, F5, F8, F10 or file.sp]
+.TP
+\fB\-i\fR illum
+Choose illuminant for computation of CIE XYZ from spectral data & FWA:
+A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp
+.TP
+\fB\-Q\fR observ
+Choose CIE Observer for spectral data or CCSS instrument:
+1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2
+(Choose FWA during operation)
+.TP
+\fB\-F\fR filter
+Set filter configuration (if aplicable):
+.TP
+n
+None
+.TP
+p
+Polarising filter
+.TP
+6
+D65
+.TP
+u
+U.V. Cut
+.TP
+\fB\-E\fR extrafilterfile
+Apply extra filter compensation file
+.TP
+\fB\-x\fR
+Display Yxy instead of Lab
+.TP
+\fB\-h\fR
+Display LCh instead of Lab
+.TP
+\fB\-V\fR
+Show running average and std. devation from ref.
+.TP
+\fB\-T\fR
+Display correlated color temperatures and CRI
+.TP
+\fB\-N\fR
+Disable auto calibration of instrument
+.TP
+\fB\-H\fR
+Start in high resolution spectrum mode (if available)
+.TP
+\fB\-X\fR file.ccmx
+Apply Colorimeter Correction Matrix
+.TP
+\fB\-X\fR file.ccss
+Use Colorimeter Calibration Spectral Samples for calibration
+.TP
+\fB\-Y\fR r|n
+Override refresh, non\-refresh display mode
+.TP
+\fB\-Y\fR R:rate
+Override measured refresh rate with rate Hz
+.TP
+\fB\-Y\fR A
+Use non\-adaptive integration time mode (if available).
+.TP
+\fB\-W\fR n|h|x
+Override serial port flow control: n = none, h = HW, x = Xon/Xoff
+.TP
+\fB\-D\fR [level]
+Print debug diagnostics to stderr
+.TP
+logfile
+Optional file to save reading results as text
diff --git a/debian/man/synthcal.1 b/debian/man/synthcal.1
new file mode 100644
index 0000000..5fce9da
--- /dev/null
+++ b/debian/man/synthcal.1
@@ -0,0 +1,47 @@
+.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1.
+.TH CREATE "1" "September 2014" "synthcal" "User Commands"
+.SH NAME
+Create \- Create a synthetic calibration file.
+.SH DESCRIPTION
+Create a synthetic calibration file, Version 1.6.3
+.SH SYNOPSIS
+.B synthcal
+.RB [\-options]\ outfile
+.TP
+\fB\-t\fR N
+i = input, o = output, d = display (default)
+.TP
+\fB\-d\fR col_comb
+choose colorant combination from the following (default 3):
+0: Print grey
+1: Video grey
+2: Print RGB
+3: Video RGB
+4: CMYK
+5: CMY
+6: CMYK + Light CM
+7: CMYK + Light CMK
+8: CMYK + Red + Blue
+9: CMYK + Orange + Green
+10: CMYK + Light CMK + Light Light K
+11: CMYK + Orange + Green + Light CM
+12: CMYK + Light CM + Medium CM
+.TP
+\fB\-D\fR colorant
+Add or delete colorant from combination:
+(Use \-?? to list known colorants)
+.TP
+\fB\-o\fR o1,o2,o3,
+Set non\-linear curve offset (default 0.0)
+.TP
+\fB\-s\fR s1,s2,s3,
+Set non\-linear curve scale (default 1.0)
+.TP
+\fB\-p\fR p1,p2,p3,
+Set non\-linear curve powers (default 1.0)
+.TP
+\fB\-E\fR description
+Set the profile dEscription string
+.TP
+outfile
+Base name for output .cal file
diff --git a/debian/man/synthread.1 b/debian/man/synthread.1
new file mode 100644
index 0000000..9a52806
--- /dev/null
+++ b/debian/man/synthread.1
@@ -0,0 +1,45 @@
+.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1.
+.TH SYNTHETIC "1" "September 2014" "synthread" "User Commands"
+.SH NAME
+Synthetic \- Synthetic device model test chart reader.
+.SH DESCRIPTION
+Synthetic device model test chart reader \- Version 1.6.3
+.SH SYNOPSIS
+.B synthread
+.RB [\-v]\ [\-s]\ [separation.icm]\ profile.[icc|mpp|ti3]\ outfile
+.TP
+\fB\-v\fR
+Verbose mode
+.TP
+\fB\-p\fR
+Use separation profile
+.TP
+\fB\-l\fR
+Construct and output in Lab rather than XYZ
+.TP
+\fB\-i\fR p1,p2,p3,
+Set input channel curve powers (default 1.0)
+.TP
+\fB\-k\fR x1:y1,x2:y2,x3:y2
+Set input channel inflection points (default 0.5,0.5)
+.TP
+\fB\-o\fR p1,p2,p3,
+Set output channel curve powers (default 1.0)
+.TP
+\fB\-r\fR level
+Add average random deviation of <level>% to input device values (after sep.)
+.TP
+\fB\-R\fR level
+Add average random deviation of <level>% to output PCS values
+.TP
+\fB\-u\fR
+Make random deviations have uniform distributions rather than normal
+.TP
+\fB\-b\fR L,a,b
+Scale black point to target Lab value
+.TP
+[separation.icm]
+Device link separation profile
+.IP
+profile.[icc|mpp|ti3] ICC, MPP profile or TI3 to use
+outfile Base name for input[ti1]/output[ti3] file
diff --git a/debian/man/targen.1 b/debian/man/targen.1
new file mode 100644
index 0000000..6ad7229
--- /dev/null
+++ b/debian/man/targen.1
@@ -0,0 +1,112 @@
+.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1.
+.TH GENERATE "1" "September 2014" "targen" "User Commands"
+.SH NAME
+Generate \- Generate Target deviceb test chart color values.
+.SH DESCRIPTION
+Generate Target deviceb test chart color values, Version 1.6.3
+.SH SYNOPSIS
+.B targen
+.RB [options]\ outfile
+.TP
+\fB\-v\fR [level]
+Verbose mode [optional level 1..N]
+.TP
+\fB\-d\fR col_comb
+choose colorant combination from the following:
+0: Print grey
+1: Video grey
+2: Print RGB
+3: Video RGB
+4: CMYK
+5: CMY
+6: CMYK + Light CM
+7: CMYK + Light CMK
+8: CMYK + Red + Blue
+9: CMYK + Orange + Green
+10: CMYK + Light CMK + Light Light K
+11: CMYK + Orange + Green + Light CM
+12: CMYK + Light CM + Medium CM
+.TP
+\fB\-D\fR colorant
+Add or delete colorant from combination:
+(Use \-?? to list known colorants)
+.TP
+\fB\-G\fR
+Generate good optimized points rather than Fast
+.TP
+\fB\-e\fR patches
+White test patches (default 4)
+.TP
+\fB\-B\fR patches
+Black test patches (default 4 Grey/RGB, else 0)
+.TP
+\fB\-s\fR steps
+Single channel steps (default grey 50, color 0)
+.TP
+\fB\-g\fR steps
+Grey axis RGB or CMY steps (default 0)
+.TP
+\fB\-m\fR steps
+Multidimensional device space cube steps (default 0)
+.TP
+\fB\-b\fR steps
+Multidimensional body centered cubic steps (default 0)
+.TP
+\fB\-f\fR patches
+Add iterative & adaptive full spread patches to total (default grey 0, color 836)
+Default is Optimised Farthest Point Sampling (OFPS)
+.TP
+\fB\-t\fR
+Use incremental far point for full spread
+.TP
+\fB\-r\fR
+Use device space random for full spread
+.TP
+\fB\-R\fR
+Use perceptual space random for full spread
+.TP
+\fB\-q\fR
+Use device space\-filling quasi\-random for full spread
+.TP
+\fB\-Q\fR
+Use perceptual space\-filling quasi\-random for full spread
+.TP
+\fB\-i\fR
+Use device space body centered cubic grid for full spread
+.TP
+\fB\-I\fR
+Use perceptual space body centered cubic grid for full spread
+.TP
+\fB\-a\fR angle
+Simplex grid angle 0.0 \- 0.5 for B.C.C. grid, default 0.333300
+.TP
+\fB\-A\fR adaptation
+Degree of adaptation of OFPS 0.0 \- 1.0 (default 0.1, \fB\-c\fR profile used 1.0)
+.TP
+\fB\-l\fR ilimit
+Total ink limit in % (default = none)
+.TP
+\fB\-p\fR power
+Optional power\-like value applied to all device values.
+.TP
+\fB\-c\fR profile
+Optional device ICC or MPP pre\-conditioning profile filename
+(Use "none" to turn off any conditioning)
+.TP
+\fB\-N\fR nemphasis
+Degree of neutral axis patch concentration 0.0\-1.0 (default 0.50)
+.TP
+\fB\-V\fR demphasis
+Degree of dark region patch concentration 1.0\-4.0 (default 1.00 = none)
+.TP
+\fB\-F\fR L,a,b,rad
+Filter out samples outside Lab sphere.
+.TP
+\fB\-w\fR
+Dump diagnostic outfilel.wrl file (Lab locations)
+.TP
+\fB\-W\fR
+Dump diagnostic outfiled.wrl file (Device locations)
+.TP
+outfile
+Base name for output(.ti1)
diff --git a/debian/man/tiffgamut.1 b/debian/man/tiffgamut.1
new file mode 100644
index 0000000..760c72f
--- /dev/null
+++ b/debian/man/tiffgamut.1
@@ -0,0 +1,90 @@
+.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1.
+.TH CREATE "1" "September 2014" "tiffgamut" "User Commands"
+.SH NAME
+Create \- Create VRML image of the gamut surface of a TIFF.
+.SH DESCRIPTION
+Create VRML image of the gamut surface of a TIFF or JPEG, Version 1.6.3
+.SH SYNOPSIS
+.B tiffgamut
+.RB [\-v\ level]\ [profile.icm\ |\ embedded.tif/jpg]\ infile1.tif/jpg\ [infile2.tif/jpg\ ...]
+.TP
+\fB\-v\fR
+Verbose
+.TP
+\fB\-d\fR sres
+Surface resolution details 1.0 \- 50.0
+.TP
+\fB\-w\fR
+emit VRML .wrl file as well as CGATS .gam file
+.TP
+\fB\-n\fR
+Don't add VRML axes or white/black point
+.TP
+\fB\-k\fR
+Add markers for prim. & sec. "cusp" points
+.TP
+\fB\-f\fR perc
+Filter by popularity, perc = percent to use
+.TP
+\fB\-i\fR intent
+p = perceptual, r = relative colorimetric,
+s = saturation, a = absolute (default), d = profile default
+.TP
+\fB\-p\fR oride
+l = Lab_PCS (default), j = CIECAM02 Appearance Jab
+.TP
+\fB\-o\fR order
+n = normal (priority: lut > matrix > monochrome)
+r = reverse (priority: monochrome > matrix > lut)
+.TP
+\fB\-c\fR viewcond
+set appearance mode and viewing conditions for CIECAM02,
+either an enumerated choice, or a parameter:value changes
+.IP
+pp \- Practical Reflection Print (ISO\-3664 P2)
+pe \- Print evaluation environment (CIE 116\-1995)
+pc \- Critical print evaluation environment (ISO\-3664 P1)
+mt \- Monitor in typical work environment
+mb \- Bright monitor in bright work environment
+md \- Monitor in darkened work environment
+jm \- Projector in dim environment
+jd \- Projector in dark environment
+tv \- Television/Film Studio
+.IP
+pcd \- Photo CD \- original scene outdoors
+.IP
+ob \- Original scene \- Bright Outdoors
+cx \- Cut Sheet Transparencies on a viewing box
+.TP
+s:surround
+n = auto, a = average, m = dim, d = dark,
+c = transparency (default average)
+.TP
+w:X:Y:Z
+Adapted white point as XYZ (default media white)
+.TP
+w:x:y
+Adapted white point as x, y
+.TP
+a:adaptation
+Adaptation luminance in cd.m^2 (default 50.0)
+.TP
+b:background
+Background % of image luminance (default 20)
+.TP
+l:imagewhite
+Image white in cd.m^2 if surround = auto (default 250)
+.TP
+f:flare
+Flare light % of image luminance (default 0)
+.TP
+g:glare
+Flare light % of ambient (default 1)
+.TP
+g:X:Y:Z
+Flare color as XYZ (default media white, Abs: D50)
+.TP
+g:x:y
+Flare color as x, y
+.HP
+\fB\-O\fR outputfile Override the default output filename.
diff --git a/debian/man/timage.1 b/debian/man/timage.1
new file mode 100644
index 0000000..2ac441a
--- /dev/null
+++ b/debian/man/timage.1
@@ -0,0 +1,33 @@
+.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1.
+.TH CREATE "1" "September 2014" "timage" "User Commands"
+.SH NAME
+Create \- Create test images, default hex RGB surface and wedge.
+.SH DESCRIPTION
+Create test images, default hex RGB surface and wedge, Version 1.6.3
+.SH SYNOPSIS
+.B timage
+.RB [\-options]\ outfile.tif
+.TP
+\fB\-t\fR
+Generate rectangular gamut boundary test chart
+.TP
+\fB\-p\fR steps
+Generate a colorspace step chart with L* steps^2
+.TP
+\fB\-r\fR res
+Resolution in DPI (default 200)
+.TP
+\fB\-s\fR
+Smooth blend
+.TP
+\fB\-x\fR
+16 bit output
+.TP
+\fB\-4\fR
+CMYK output
+.TP
+\fB\-g\fR prop
+Percentage towards grey (default 0%)
+.TP
+outfile.tif
+Profile to check against
diff --git a/debian/man/txt2ti3.1 b/debian/man/txt2ti3.1
new file mode 100644
index 0000000..f0c44c4
--- /dev/null
+++ b/debian/man/txt2ti3.1
@@ -0,0 +1,33 @@
+.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1.
+.TH CONVERT "1" "September 2014" "txt2ti3" "User Commands"
+.SH NAME
+Convert \- Convert Gretag/Logo or X-Rite ColorPport raw RGB or CMYK device profile data to Argyll CGATS data.
+.SH DESCRIPTION
+Convert Gretag/Logo or X\-Rite ColorPport raw RGB or CMYK device profile data to Argyll CGATS data, Version 1.6.3
+.SH SYNOPSIS
+.B txt2ti3
+.RB [\-v]\ [\-l\ limit]\ [devfile]\ infile\ [specfile]\ outbase
+.TP
+\fB\-2\fR
+Create dummy .ti2 file as well
+.TP
+\fB\-l\fR limit
+set ink limit, 0 \- 400% (default max in file)
+.TP
+\fB\-d\fR
+Set type of device as Display, not Output
+.TP
+\fB\-i\fR
+Set type of device as Input, not Output
+.TP
+[devfile]
+Input Device CMYK target file (typically file.txt)
+.TP
+infile
+Input CIE, Spectral or Device & Spectral file (typically file.txt)
+.TP
+[specfile]
+Input Spectral file (typically file.txt)
+.TP
+outbasename
+Output file basename for .ti3 and .ti2
diff --git a/debian/man/viewgam.1 b/debian/man/viewgam.1
new file mode 100644
index 0000000..83afd63
--- /dev/null
+++ b/debian/man/viewgam.1
@@ -0,0 +1,42 @@
+.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1.
+.TH VIEW "1" "September 2014" "viewgam" "User Commands"
+.SH NAME
+View \- View gamuts.
+.SH DESCRIPTION
+View gamuts Version 1.6.3
+.SH SYNOPSIS
+.B viewgam
+.RB { [\-c\ color]\ [\-t\ trans]\ [\-w|s]\ infile.gam }\ ...\ outfile.wrl
+.TP
+\fB\-c\fR color
+Color to make gamut, r = red, g = green, b = blue
+c = cyan, m = magenta, y = yellow, e = grey, w = white
+n = natural color
+.TP
+\fB\-t\fR trans
+Set transparency from 0.0 (opaque) to 1.0 (invisible)
+.TP
+\fB\-w\fR
+Show as a wireframe
+.TP
+\fB\-s\fR
+Show as a solid surace
+.TP
+infile.gam
+Name of .gam file
+Repeat above for each input file
+.TP
+\fB\-n\fR
+Don't add Lab axes
+.TP
+\fB\-k\fR
+Add markers for prim. & sec. "cusp" points
+.TP
+\fB\-i\fR
+Compute and print intersecting volume of first 2 gamuts
+.TP
+\fB\-I\fR isect.gam
+Same as \fB\-i\fR, but save intersection gamut to isect.gam
+.TP
+outfile.wrl
+Name of output .wrl file
diff --git a/debian/man/xicclu.1 b/debian/man/xicclu.1
new file mode 100644
index 0000000..b5aa7e9
--- /dev/null
+++ b/debian/man/xicclu.1
@@ -0,0 +1,162 @@
+.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1.
+.TH LOOKUP "1" "September 2014" "xicclu" "User Commands"
+.SH NAME
+Lookup \- Translate colors through an xicc.
+.SH DESCRIPTION
+Lookup ICC or CAL colors, Version 1.6.3
+.SH SYNOPSIS
+.B xicclu
+.RB [\-options]\ profile_or_cal
+.TP
+\fB\-v\fR level
+Verbosity level 0 \- 2 (default = 1)
+.TP
+\fB\-g\fR
+Plot slice instead of looking colors up. (Default white to black)
+.TP
+\fB\-G\fR s:L:a:b
+Override plot slice start with Lab or Jab co\-ordinate
+.TP
+\fB\-G\fR e:L:a:b
+Override plot slice end with Lab or Jab co\-ordinate
+.TP
+\fB\-f\fR function
+f = forward, b = backwards, g = gamut, p = preview
+if = inverted forward, ib = inverted backwards
+.TP
+\fB\-i\fR intent
+a = absolute, r = relative colorimetric
+p = perceptual, s = saturation
+.TP
+\fB\-o\fR order
+n = normal (priority: lut > matrix > monochrome)
+r = reverse (priority: monochrome > matrix > lut)
+.TP
+\fB\-p\fR oride
+x = XYZ_PCS, X = XYZ * 100, l = Lab_PCS, L = LCh, y = Yxy
+j = CIECAM02 Appearance Jab, J = CIECAM02 Appearance JCh
+.TP
+\fB\-s\fR scale
+Scale device range 0.0 \- scale rather than 0.0 \- 1.0
+.TP
+\fB\-e\fR flag
+Video encode device input as:
+.TP
+\fB\-E\fR flag
+Video decode device output as:
+.TP
+n
+normal 0..1 full range RGB levels (default)
+.TP
+t
+(16\-235)/255 "TV" RGB levels
+.TP
+6
+Rec601 YCbCr SD (16\-235,240)/255 "TV" levels
+.TP
+7
+Rec709 1125/60Hz YCbCr HD (16\-235,240)/255 "TV" levels
+.TP
+5
+Rec709 1250/50Hz YCbCr HD (16\-235,240)/255 "TV" levels
+.TP
+2
+Rec2020 YCbCr UHD (16\-235,240)/255 "TV" levels
+.TP
+C
+Rec2020 Constant Luminance YCbCr UHD (16\-235,240)/255 "TV" levels
+.TP
+\fB\-k\fR [zhxrlv]
+Black value target: z = zero K,
+h = 0.5 K, x = max K, r = ramp K (def.)
+l = extra PCS input is portion of K locus
+v = extra PCS input is K target value
+.HP
+\fB\-k\fR p stle stpo enpo enle shape
+.IP
+stle: K level at White 0.0 \- 1.0
+stpo: start point of transition Wh 0.0 \- Bk 1.0
+enpo: End point of transition Wh 0.0 \- Bk 1.0
+enle: K level at Black 0.0 \- 1.0
+shape: 1.0 = straight, 0.0\-1.0 concave, 1.0\-2.0 convex
+.HP
+\fB\-k\fR q stle0 stpo0 enpo0 enle0 shape0 stle2 stpo2 enpo2 enle2 shape2
+.IP
+Transfer extra PCS input to dual curve limits
+.TP
+\fB\-K\fR parameters
+Same as \fB\-k\fR, but target is K locus rather than K value itself
+.TP
+\fB\-l\fR tlimit
+set total ink limit, 0 \- 400% (estimate by default)
+.TP
+\fB\-L\fR klimit
+set black ink limit, 0 \- 100% (estimate by default)
+.TP
+\fB\-a\fR
+show actual target values if clipped
+.TP
+\fB\-u\fR
+warn if output PCS is outside the spectrum locus
+.TP
+\fB\-m\fR
+merge output processing into clut
+.TP
+\fB\-b\fR
+use CAM Jab for clipping
+.TP
+\fB\-c\fR viewcond
+set viewing conditions for CIECAM97s,
+either an enumerated choice, or a parameter:value changes
+.IP
+pp \- Practical Reflection Print (ISO\-3664 P2)
+pe \- Print evaluation environment (CIE 116\-1995)
+pc \- Critical print evaluation environment (ISO\-3664 P1)
+mt \- Monitor in typical work environment
+mb \- Bright monitor in bright work environment
+md \- Monitor in darkened work environment
+jm \- Projector in dim environment
+jd \- Projector in dark environment
+tv \- Television/Film Studio
+.IP
+pcd \- Photo CD \- original scene outdoors
+.IP
+ob \- Original scene \- Bright Outdoors
+cx \- Cut Sheet Transparencies on a viewing box
+.TP
+s:surround
+n = auto, a = average, m = dim, d = dark,
+c = transparency (default average)
+.TP
+w:X:Y:Z
+Adapted white point as XYZ (default media white, Abs: D50)
+.TP
+w:x:y
+Adapted white point as x, y
+.TP
+a:adaptation
+Adaptation luminance in cd.m^2 (default 50.0)
+.TP
+b:background
+Background % of image luminance (default 20)
+.TP
+l:imagewhite
+Image white in cd.m^2 if surround = auto (default 250)
+.TP
+f:flare
+Flare light % of image luminance (default 0)
+.TP
+g:glare
+Flare light % of ambient (default 1)
+.TP
+g:X:Y:Z
+Flare color as XYZ (default media white, Abs: D50)
+.TP
+g:x:y
+Flare color as x, y
+.IP
+The colors to be translated should be fed into standard in,
+one input color per line, white space separated.
+A line starting with a # will be ignored.
+A line not starting with a number will terminate the program.
+Use \fB\-v0\fR for just output colors.