diff options
Diffstat (limited to 'debian/patches/0100_spelling.patch')
| -rw-r--r-- | debian/patches/0100_spelling.patch | 1712 |
1 files changed, 1712 insertions, 0 deletions
diff --git a/debian/patches/0100_spelling.patch b/debian/patches/0100_spelling.patch new file mode 100644 index 0000000..c65916b --- /dev/null +++ b/debian/patches/0100_spelling.patch @@ -0,0 +1,1712 @@ +Description: correct some typos +Author: Jörg Frings-Fürst <debian@jff-webhosting.net> +Last-Update: 2017-08-26 +--- +This patch header follows DEP-3: http://dep.debian.net/deps/dep3/ +Index: trunk/spectro/dispcal.c +=================================================================== +--- trunk.orig/spectro/dispcal.c ++++ trunk/spectro/dispcal.c +@@ -1942,7 +1942,7 @@ int main(int argc, char *argv[]) { + /* Serial port flow control */ + } else if (argv[fa][1] == 'W') { + fa = nfa; +- if (na == NULL) usage(0,"Paramater expected following -W"); ++ if (na == NULL) usage(0,"Parameter expected following -W"); + if (na[0] == 'n' || na[0] == 'N') + fc = fc_None; + else if (na[0] == 'h' || na[0] == 'H') +@@ -1965,13 +1965,13 @@ int main(int argc, char *argv[]) { + /* Black point correction amount */ + } else if (argv[fa][1] == 'k') { + fa = nfa; +- if (na == NULL) usage(0,"Paramater expected following -k"); ++ if (na == NULL) usage(0,"Parameter expected following -k"); + bkcorrect = atof(na); + if (bkcorrect < 0.0 || bkcorrect > 1.0) usage(0,"-k parameter must be between 0.0 and 1.0"); + /* Neutral blend rate (power) */ + } else if (argv[fa][1] == 'A') { + fa = nfa; +- if (na == NULL) usage(0,"Paramater expected following -A"); ++ if (na == NULL) usage(0,"Parameter expected following -A"); + x.nbrate = atof(na); + if (x.nbrate < 0.05 || x.nbrate > 20.0) usage(0,"-A parameter must be between 0.05 and 20.0"); + /* Black brightness */ +@@ -2004,7 +2004,7 @@ int main(int argc, char *argv[]) { + /* COM port */ + } else if (argv[fa][1] == 'c') { + fa = nfa; +- if (na == NULL) usage(0,"Paramater expected following -c"); ++ if (na == NULL) usage(0,"Parameter expected following -c"); + comport = atoi(na); + if (comport < 1 || comport > 50) usage(0,"-c parameter %d out of range",comport); + +@@ -3068,7 +3068,7 @@ int main(int argc, char *argv[]) { + /* Black level adjustment */ + /* Due to the possibility of the channel offsets not being even, */ + /* we use the largest of the XYZ values after they have been */ +- /* scaled to be even acording to the white XYZ balance. */ ++ /* scaled to be even according to the white XYZ balance. */ + /* It's safer to set the black level a bit low, and then the */ + /* calibration curves can bump the low ones up. */ + if (c == '1') { +Index: trunk/spectro/spotread.c +=================================================================== +--- trunk.orig/spectro/spotread.c ++++ trunk/spectro/spotread.c +@@ -497,7 +497,7 @@ int main(int argc, char *argv[]) { + /* COM port */ + } else if (argv[fa][1] == 'c') { + fa = nfa; +- if (na == NULL) usage("Paramater expected following -c"); ++ if (na == NULL) usage("Parameter expected following -c"); + { + comport = atoi(na); + if (comport < 1 || comport > 40) usage("-c parameter %d out of range",comport); +@@ -506,7 +506,7 @@ int main(int argc, char *argv[]) { + /* Display type */ + } else if (argv[fa][1] == 'y') { + fa = nfa; +- if (na == NULL) usage("Paramater expected following -y"); ++ if (na == NULL) usage("Parameter expected following -y"); + dtype = na[0]; + + #ifndef SALONEINSTLIB +@@ -514,7 +514,7 @@ int main(int argc, char *argv[]) { + } else if (argv[fa][1] == 'I') { + + fa = nfa; +- if (na == NULL) usage("Paramater expected following -I"); ++ if (na == NULL) usage("Parameter expected following -I"); + if (strcmp(na, "A") == 0 + || strcmp(na, "M0") == 0) { + tillum_set = spec = 1; +@@ -562,7 +562,7 @@ int main(int argc, char *argv[]) { + /* Spectral Illuminant type for XYZ computation */ + } else if (argv[fa][1] == 'i') { + fa = nfa; +- if (na == NULL) usage("Paramater expected following -i"); ++ if (na == NULL) usage("Parameter expected following -i"); + if (strcmp(na, "A") == 0) { + illum_set = spec = 1; + illum = icxIT_A; +@@ -611,7 +611,7 @@ int main(int argc, char *argv[]) { + /* Spectral Observer type */ + } else if (argv[fa][1] == 'Q') { + fa = nfa; +- if (na == NULL) usage("Paramater expected following -Q"); ++ if (na == NULL) usage("Parameter expected following -Q"); + if (strcmp(na, "1931_2") == 0) { /* Classic 2 degree */ + obType = icxOT_CIE_1931_2; + } else if (strcmp(na, "1964_10") == 0) { /* Classic 10 degree */ +@@ -693,7 +693,7 @@ int main(int argc, char *argv[]) { + /* Filter configuration */ + } else if (argv[fa][1] == 'F') { + fa = nfa; +- if (na == NULL) usage("Paramater expected following -F"); ++ if (na == NULL) usage("Parameter expected following -F"); + if (na[0] == 'n' || na[0] == 'N') + fe = inst_opt_filter_none; + else if (na[0] == 'p' || na[0] == 'P') +@@ -708,13 +708,13 @@ int main(int argc, char *argv[]) { + /* Extra filter compensation file */ + } else if (argv[fa][1] == 'E') { + fa = nfa; +- if (na == NULL) usage("Paramater expected following -E"); ++ if (na == NULL) usage("Parameter expected following -E"); + strncpy(filtername,na,MAXNAMEL-1); filtername[MAXNAMEL-1] = '\000'; + + /* XRGA conversion */ + } else if (argv[fa][1] == 'A') { + fa = nfa; +- if (na == NULL) usage("Paramater expected following -A"); ++ if (na == NULL) usage("Parameter expected following -A"); + if (na[0] == 'N') + calstd = xcalstd_none; + else if (na[0] == 'A') +@@ -724,7 +724,7 @@ int main(int argc, char *argv[]) { + else if (na[0] == 'G') + calstd = xcalstd_gmdi; + else +- usage("Paramater after -A '%c' not recognized",na[0]); ++ usage("Parameter after -A '%c' not recognized",na[0]); + + /* Show Yxy */ + } else if (argv[fa][1] == 'x') { +@@ -1432,7 +1432,7 @@ int main(int argc, char *argv[]) { + + /* Or something is wrong with instrument capabilities */ + } else { +- printf("\nNo reasonable trigger mode avilable for this instrument\n"); ++ printf("\nNo reasonable trigger mode available for this instrument\n"); + it->del(it); + return -1; + } +Index: trunk/spectro/colorhug.c +=================================================================== +--- trunk.orig/spectro/colorhug.c ++++ trunk/spectro/colorhug.c +@@ -212,7 +212,7 @@ colorhug_command(colorhug *p, + + a1logd(p->log,8,"colorhug_command: Read %d bytes and %d read\n",xrbytes,rbytes); + if (rbytes >= 2) { +- a1logd(p->log,6,"colorhug_command: recieved cmd '%s' error '%s' args '%s'\n", ++ a1logd(p->log,6,"colorhug_command: received cmd '%s' error '%s' args '%s'\n", + inst_desc(buf[1]), + colorhug_interp_error((inst *) p, buf[0]), + icoms_tohex(buf, rbytes - 2)); +Index: trunk/spectro/dispwin.c +=================================================================== +--- trunk.orig/spectro/dispwin.c ++++ trunk/spectro/dispwin.c +@@ -2766,7 +2766,7 @@ int dispwin_install_profile(dispwin *p, + + /* Un-Install a display profile */ + /* Return nz if failed, */ +-/* 1 if not sucessfully deleted */ ++/* 1 if not successfully deleted */ + /* 2 if profile not found */ + int dispwin_uninstall_profile(dispwin *p, char *fname, p_scope scope) { + debugr2((errout,"dispwin_uninstall_profile '%s'\n", fname)); +@@ -5038,7 +5038,7 @@ int ddebug /* >0 to print debug sta + vinfo = XGetVisualInfo(p->mydisplay, VisualIDMask, &template, &nitems); + + if (nitems < 1) { +- debugr2((errout,"new_dispwin: Failed to get XGetVisualInfo of defalt Visual\n")); ++ debugr2((errout,"new_dispwin: Failed to get XGetVisualInfo of default Visual\n")); + dispwin_del(p); + return NULL; + } +@@ -5630,7 +5630,7 @@ int ddebug /* >0 to print debug sta + p->native = native &= ~2; + } + +- debugr("new_dispwin: return sucessfully\n"); ++ debugr("new_dispwin: return successfully\n"); + return p; + } + +Index: trunk/spectro/dtp51.c +=================================================================== +--- trunk.orig/spectro/dtp51.c ++++ trunk/spectro/dtp51.c +@@ -680,7 +680,7 @@ dtp51_interp_error(inst *pp, int ec) { + case DTP51_INVALID_STEP: + return "Invalid step"; + case DTP51_NO_DATA_AVAILABLE: +- return "No data availble"; ++ return "No data available"; + case DTP51_LAMP_MARGINAL: + return "Lamp marginal"; + case DTP51_LAMP_FAILURE: +Index: trunk/spectro/dtp92.c +=================================================================== +--- trunk.orig/spectro/dtp92.c ++++ trunk/spectro/dtp92.c +@@ -357,7 +357,7 @@ dtp92_init_coms(inst *pp, baud_rate br, + if ((ev = dtp92_command(p, tbuf, buf, MAX_MES_SIZE, 6.0)) != inst_ok) + error("Writing offset drift value failed"); + else +- printf("Writing offset drift value suceeded!\n"); ++ printf("Writing offset drift value succeeded!\n"); + } else { + printf("No command written\n"); + } +@@ -371,7 +371,7 @@ dtp92_init_coms(inst *pp, baud_rate br, + return inst_coms_fail; + } + +- a1logd(p->log, 2, "dtp92_init_coms: init coms has suceeded\n"); ++ a1logd(p->log, 2, "dtp92_init_coms: init coms has succeeded\n"); + + p->gotcoms = 1; + return inst_ok; +@@ -941,7 +941,7 @@ dtp92_interp_error(inst *pp, int ec) { + case DTP92_NO_DATA_AVAILABLE: + return "No data available"; + case DTP92_MISSING_PARAMETER: +- return "Paramter is missing"; ++ return "Parameter is missing"; + case DTP92_CALIBRATION_DENIED: + return "Invalid calibration enable code"; + case DTP92_NEEDS_OFFSET_CAL: +Index: trunk/spectro/hidio.c +=================================================================== +--- trunk.orig/spectro/hidio.c ++++ trunk/spectro/hidio.c +@@ -739,7 +739,7 @@ icoms_hid_read(icoms *p, + { + unsigned char *rbuf2; + +- /* Create a copy of the data recieved with one more byte */ ++ /* Create a copy of the data received with one more byte */ + if ((rbuf2 = malloc(bsize + 1)) == NULL) { + a1loge(p->log, ICOM_SYS, "icoms_hid_read: malloc failed\n"); + return ICOM_SYS; +Index: trunk/spectro/huey.c +=================================================================== +--- trunk.orig/spectro/huey.c ++++ trunk/spectro/huey.c +@@ -81,7 +81,7 @@ static int icoms2huey_err(int se, int to + /* i1Display command codes */ + /* B = byte (8bit), S = short (16bit), W = word (32bit), A = string */ + /* U = unused byte, - = no arguments/results */ +-/* The is a 7 byte command buffer and 6 response recieve buffer. */ ++/* The is a 7 byte command buffer and 6 response receive buffer. */ + /* :2 means the read is from a second 8 byte ep x81 read. */ + /* cbuf[-] is command byte */ + /* rbuf[-2] is continuation byte */ +Index: trunk/spectro/i1pro_imp.c +=================================================================== +--- trunk.orig/spectro/i1pro_imp.c ++++ trunk/spectro/i1pro_imp.c +@@ -2700,7 +2700,7 @@ int *pinstmsec) { /* Return instrument l + break; + } + +- a1logd(p->log, 2, "i1pro_meas_delay: stoped at sample %d time %f\n",i,samp[i].sec); ++ a1logd(p->log, 2, "i1pro_meas_delay: stopped at sample %d time %f\n",i,samp[i].sec); + + /* Compute overall delay */ + dispmsec = (int)(samp[i].sec * 1000.0 + 0.5); /* Display update time */ +@@ -3153,7 +3153,7 @@ i1pro_code i1pro_imp_measure( + } + } + +- a1logd(p->log,3,"i1pro_imp_measure sucessful return\n"); ++ a1logd(p->log,3,"i1pro_imp_measure successful return\n"); + if (user_trig) + return I1PRO_USER_TRIG; + return ev; +@@ -3815,7 +3815,7 @@ i1pro_code i1pro_imp_meas_refrate( + } + } + } else { +- a1logd(p->log, 3, "Not enough tries suceeded to determine refresh rate\n"); ++ a1logd(p->log, 3, "Not enough tries succeeded to determine refresh rate\n"); + } + + return I1PRO_RD_NOREFR_FOUND; +@@ -3910,7 +3910,7 @@ i1pro_code i1pro_restore_refspot_cal(i1p + return I1PRO_OK; + } + +- /* We've sucessfully restored the dark calibration */ ++ /* We've successfully restored the dark calibration */ + s->dark_valid = 1; + s->ddate = m->caldate; + +@@ -3955,7 +3955,7 @@ i1pro_code i1pro_restore_refspot_cal(i1p + return I1PRO_OK; + } + +- /* We've sucessfully restored the calibration */ ++ /* We've successfully restored the calibration */ + s->cal_valid = 1; + s->cfdate = m->caldate; + +@@ -4310,7 +4310,7 @@ i1pro_code i1pro_save_calibration(i1pro + write_doubles(&x, fp, s->idark_data[3]-1, m->nraw+1); + } + +- a1logd(p->log,3,"nbytes = %d, Checkum = 0x%x\n",x.nbytes,x.chsum); ++ a1logd(p->log,3,"nbytes = %d, Checksum = 0x%x\n",x.nbytes,x.chsum); + write_ints(&x, fp, (int *)&x.chsum, 1); + + if (fclose(fp) != 0) +Index: trunk/spectro/madvrwin.c +=================================================================== +--- trunk.orig/spectro/madvrwin.c ++++ trunk/spectro/madvrwin.c +@@ -603,7 +603,7 @@ int ii = 0; + } + #endif + +- debugr("new_madvrwin: return sucessfully\n"); ++ debugr("new_madvrwin: return successfully\n"); + + return p; + } +Index: trunk/spectro/ss.c +=================================================================== +--- trunk.orig/spectro/ss.c ++++ trunk/spectro/ss.c +@@ -374,7 +374,7 @@ ss_init_coms(inst *pp, baud_rate br, flo + + p->gotcoms = 1; + +- a1logd(p->log, 2, "ss_init_coms: init coms has suceeded\n"); ++ a1logd(p->log, 2, "ss_init_coms: init coms has succeeded\n"); + + return inst_ok; + } +@@ -1743,7 +1743,7 @@ ss_interp_error(inst *pp, int ec) { + case ss_et_FilterOutOfPos: + return "Filter wheel out of position"; + case ss_et_SendTimeout: +- return "Data transmission timout"; ++ return "Data transmission timeout"; + case ss_et_DriveError: + return "Data drive defect"; + case ss_et_MeasDisabled: +@@ -1863,7 +1863,7 @@ ss_interp_error(inst *pp, int ec) { + case ss_et_BadHexEncoding: + return "Message received from instrument has bad Hex encoding"; + case ss_et_RecBufferOverun: +- return "Message received from instrument would overflow recieve buffer"; ++ return "Message received from instrument would overflow receive buffer"; + default: + return "Unknown error code"; + } +Index: trunk/spectro/ss_imp.c +=================================================================== +--- trunk.orig/spectro/ss_imp.c ++++ trunk/spectro/ss_imp.c +@@ -216,7 +216,7 @@ static int h2b(ss *p, char c) { + return 0; + } + +-/* Return the first enum from the recieve buffer without removing it. */ ++/* Return the first enum from the receive buffer without removing it. */ + int ss_peek_ans(ss *p) { + int rv; + +Index: trunk/spectro/webwin.c +=================================================================== +--- trunk.orig/spectro/webwin.c ++++ trunk/spectro/webwin.c +@@ -411,7 +411,7 @@ int ddebug /* >0 to print debug sta + msec_sleep(50); + } + +- debugr("new_webwin: return sucessfully\n"); ++ debugr("new_webwin: return successfully\n"); + + return p; + } +Index: trunk/xicc/cv.c +=================================================================== +--- trunk.orig/xicc/cv.c ++++ trunk/xicc/cv.c +@@ -101,7 +101,7 @@ main(int argc, char *argv[]) { + + printf("There are %d parameters:\n",np); fflush(stdout); + for (i = 0; i < np; i++) { +- printf("Paramter %d = %f\n",i, params[i]); fflush(stdout); ++ printf("Parameter %d = %f\n",i, params[i]); fflush(stdout); + } + + /* Display the result */ +Index: trunk/spectro/ss_imp.h +=================================================================== +--- trunk.orig/spectro/ss_imp.h ++++ trunk/spectro/ss_imp.h +@@ -723,7 +723,7 @@ void ss_add_string(struct _ss *p, char * + /* - - - - - - - - - - - - - - - - - - - - - */ + /* ANSWER: */ + +-/* Return the first enum from the recieve buffer without removing it. */ ++/* Return the first enum from the receive buffer without removing it. */ + int ss_peek_ans(struct _ss *p); + + /* Remove a Spectrolino answer enum from the revieve buffer, */ +Index: trunk/imdi/cctiff.c +=================================================================== +--- trunk.orig/imdi/cctiff.c ++++ trunk/imdi/cctiff.c +@@ -36,7 +36,7 @@ + Add flag to ignore inkname mismatches. + + +- Should add support for transfering any extra alpha ++ Should add support for transferring any extra alpha + planes from input to output, rather than simply ignoring them. + + +@@ -1952,11 +1952,11 @@ main(int argc, char *argv[]) { + + if (wh != NULL) { + printf("Output TIFF file '%s'\n",out_name); +- printf("Ouput raster file ICC colorspace is %s\n",icm2str(icmColorSpaceSignature,su.outs)); ++ printf("Output raster file ICC colorspace is %s\n",icm2str(icmColorSpaceSignature,su.outs)); + printf("Output TIFF file photometric is %s\n",Photometric2str(wphotometric)); + } else { + printf("Output JPEG file '%s'\n",out_name); +- printf("Ouput raster file ICC colorspace is %s\n",icm2str(icmColorSpaceSignature,su.outs)); ++ printf("Output raster file ICC colorspace is %s\n",icm2str(icmColorSpaceSignature,su.outs)); + printf("Output JPEG file colorspace is %s\n",JPEG_cspace2str(wj.jpeg_color_space)); + if (wdesc != NULL) + printf("Output raster file description: '%s'\n",wdesc); +Index: trunk/imdi/imdi.h +=================================================================== +--- trunk.orig/imdi/imdi.h ++++ trunk/imdi/imdi.h +@@ -38,7 +38,7 @@ struct _imdi { + + /* Note that once an imdi is created, multiple can call interp() without */ + /* interfering with each other, allowing parallel execution. */ +- void (*interp)(struct _imdi *s, void **outp, int outst, /* Ouput pointers and stride */ ++ void (*interp)(struct _imdi *s, void **outp, int outst, /* Output pointers and stride */ + void **inp, int inst, /* Input pointers and stride */ + unsigned int npixels); /* Number of pixels */ + +Index: trunk/spectro/munki_imp.c +=================================================================== +--- trunk.orig/spectro/munki_imp.c ++++ trunk/spectro/munki_imp.c +@@ -1904,7 +1904,7 @@ int *pinstmsec) { /* Return instrumen + break; + } + +- a1logd(p->log, 2, "munki_meas_delay: stoped at sample %d time %f\n",i,samp[i].sec); ++ a1logd(p->log, 2, "munki_meas_delay: stopped at sample %d time %f\n",i,samp[i].sec); + + /* Compute overall delay and subtract patch change delay */ + dispmsec = (int)(samp[i].sec * 1000.0 + 0.5); +@@ -2385,7 +2385,7 @@ munki_code munki_imp_measure( + if (nvals > 0) + vals[0].duration = duration; /* Possible flash duration */ + +- a1logd(p->log,3,"munki_imp_measure sucessful return\n"); ++ a1logd(p->log,3,"munki_imp_measure successful return\n"); + if (user_trig) + return MUNKI_USER_TRIG; + return ev; +@@ -3046,7 +3046,7 @@ munki_code munki_imp_meas_refrate( + } + } + } else { +- a1logd(p->log, 3, "Not enough tries suceeded to determine refresh rate\n"); ++ a1logd(p->log, 3, "Not enough tries succeeded to determine refresh rate\n"); + } + + return MUNKI_RD_NOREFR_FOUND; +@@ -3260,7 +3260,7 @@ munki_code munki_save_calibration(munki + write_doubles(&x, fp, s->idark_data[3]-1, m->nraw+1); + } + +- a1logd(p->log,3,"Checkum = 0x%x\n",x.chsum); ++ a1logd(p->log,3,"Checksum = 0x%x\n",x.chsum); + write_ints(&x, fp, (int *)&x.chsum, 1); + + if (fclose(fp) != 0) +@@ -6425,7 +6425,7 @@ munki_code munki_create_hr(munki *p, int + int i, j, jj, k, cx, sx; + munki_fc coeff[40][16]; /* Existing filter cooefficients */ + int nwav1; /* Number of filters */ +- double wl_short1, wl_long1; /* Ouput wavelength of first and last filters */ ++ double wl_short1, wl_long1; /* Output wavelength of first and last filters */ + double wl_step1; + munki_xp xp[41]; /* Crossover points each side of filter */ + munki_code ev = MUNKI_OK; +@@ -8733,7 +8733,7 @@ munki_readmeasurement( + + top = extra + m->c_inttime * nmeas; + +- a1logd(p->log,2,"munki_readmeasurement: inummeas %d, scanflag %d, address %p bsize 0x%x, timout %f\n",inummeas, scanflag, buf, bsize, top); ++ a1logd(p->log,2,"munki_readmeasurement: inummeas %d, scanflag %d, address %p bsize 0x%x, timeout %f\n",inummeas, scanflag, buf, bsize, top); + + for (;;) { + int size; /* number of bytes to read */ +Index: trunk/target/printtarg.c +=================================================================== +--- trunk.orig/target/printtarg.c ++++ trunk/target/printtarg.c +@@ -345,7 +345,7 @@ static void ps_setcolor(trend *ss, xcal + } else if (c->altrep == 6) { /* DeviceN */ + gen_ncolor(s, c); + } else { +- error("Device white encoding not approproate!"); ++ error("Device white encoding not appropriate!"); + } + + } else if (c->nmask == ICX_K) { +@@ -362,7 +362,7 @@ static void ps_setcolor(trend *ss, xcal + } else if (c->altrep == 3) { /* DeviceN */ + gen_ncolor(s, c); + } else { +- error("Device black encoding not approproate!"); ++ error("Device black encoding not appropriate!"); + } + + } else if (c->nmask == ICX_CMY) { +@@ -377,7 +377,7 @@ static void ps_setcolor(trend *ss, xcal + } else if (c->altrep == 8) { /* DeviceN */ + gen_ncolor(s, c); + } else { +- error("Device CMY encoding not approproate!"); ++ error("Device CMY encoding not appropriate!"); + } + + } else if (c->nmask == ICX_RGB || c->nmask == ICX_IRGB) { +@@ -749,7 +749,7 @@ static void tiff_setcolor(trend *ss, xca + } else if (c->altrep == 6) { /* DeviceN single channel */ + s->c[0] = cdev[0]; + } else { +- error("Device white encoding not approproate!"); ++ error("Device white encoding not appropriate!"); + } + + } else if (c->nmask == ICX_K) { +@@ -765,7 +765,7 @@ static void tiff_setcolor(trend *ss, xca + } else if (c->altrep == 3) { /* DeviceN single channel */ + s->c[0] = cdev[0]; + } else { +- error("Device black encoding not approproate!"); ++ error("Device black encoding not appropriate!"); + } + + } else if (c->nmask == ICX_CMY) { +@@ -783,7 +783,7 @@ static void tiff_setcolor(trend *ss, xca + s->c[1] = cdev[1]; + s->c[2] = cdev[2]; + } else { +- error("Device CMY encoding not approproate!"); ++ error("Device CMY encoding not appropriate!"); + } + + } else { +@@ -968,7 +968,7 @@ static trend *new_tiff_trend( + nc = icx_noofinks(nmask); + nc = 1; + } else { +- error("Device white encoding not approproate"); ++ error("Device white encoding not appropriate"); + } + + } else if (nmask == ICX_K) { +@@ -984,7 +984,7 @@ static trend *new_tiff_trend( + nc = icx_noofinks(nmask); + nc = 1; + } else { +- error("Device black encoding not approproate"); ++ error("Device black encoding not appropriate"); + } + + } else if (nmask == ICX_RGB || nmask == ICX_IRGB) { +@@ -1002,7 +1002,7 @@ static trend *new_tiff_trend( + csp = ncol_2d; + nc = icx_noofinks(nmask); + } else { +- error("Device CMY encoding not approproate"); ++ error("Device CMY encoding not appropriate"); + } + + } else if (nmask == ICX_CMYK) { +@@ -2209,7 +2209,7 @@ int *p_npat /* Return number of patche + + + } else { +- error("Unsupported intrument type"); ++ error("Unsupported instrument type"); + } + + /* Compute page limits */ +@@ -2255,7 +2255,7 @@ int *p_npat /* Return number of patche + tidpad = (pprow - tidminp)/2; /* Center TID */ + + if (pprow < (1+nextrap)) +- error("Paper size not long enought for a single patch per row!"); ++ error("Paper size not long enough for a single patch per row!"); + + *ptpprow = tpprow = pprow - nextrap; /* Test sample patches per row */ + +@@ -2953,7 +2953,7 @@ char *argv[]; + double sscale = 1.0; /* Spacer size scale */ + int rand = 1; + int qbits = 0; /* Quantization bits */ +- int oft = 0; /* Ouput File type, 0 = PS, 1 = EPS , 2 = TIFF */ ++ int oft = 0; /* Output File type, 0 = PS, 1 = EPS , 2 = TIFF */ + int nocups = 0; /* Supress CUPS PS/EPS job ticket */ + depth2d tiffdpth = bpc8_2d; /* TIFF pixel depth */ + double tiffres = 100.0; /* TIFF resolution in DPI */ +Index: trunk/gamut/nearsmth.c +=================================================================== +--- trunk.orig/gamut/nearsmth.c ++++ trunk/gamut/nearsmth.c +@@ -263,7 +263,7 @@ double dxratio /* Depth expansion ratio + double va, vr, vd, vv = 0.0; + + /* Absolute, Delta E^2 between test point and destination closest */ +- /* aodv is already positioned acording to the LCh weights, */ ++ /* aodv is already positioned according to the LCh weights, */ + /* so weight as per average of these */ + a_o = w->a.o; + va = wdesq(dtp, aodv, a_o, a_o, a_o, SUM_POW); +@@ -4067,7 +4067,7 @@ static void create_influence_plot(nearsm + swdiag = new_rspl(RSPL_NOFLAGS, 3, 3); /* Allocate 3D -> 3D */ + swdiag->fit_rspl(swdiag, RSPL_NOFLAGS, fpnts, nmpts, NULL, NULL, gres, NULL, NULL, 1.0, avgdev, NULL); + +- /* Now create a plot of the sci_gam with the vertexes colored acording to the */ ++ /* Now create a plot of the sci_gam with the vertexes colored according to the */ + /* diagnostic map. */ + if ((wrl = new_vrml("sci_gam_wt", 1, vrml_lab)) == NULL) { + fprintf(stderr,"gamut map: new_vrml failed for '%s%s'\n","sci_gam_wt",vrm_ext()); +Index: trunk/gamut/nearsmth.h +=================================================================== +--- trunk.orig/gamut/nearsmth.h ++++ trunk/gamut/nearsmth.h +@@ -294,7 +294,7 @@ gammapweights *src2, double wgt2, + gammapweights *src3, double wgt3 + ); + +-/* Tweak weights acording to extra cmy cusp flags or rel override */ ++/* Tweak weights according to extra cmy cusp flags or rel override */ + void tweak_weights(gammapweights out[14], int dst_cmymap, int rel_oride); + + #endif /* NEARSMTH_H */ +Index: trunk/imdi/cctiffo.c +=================================================================== +--- trunk.orig/imdi/cctiffo.c ++++ trunk/imdi/cctiffo.c +@@ -307,7 +307,7 @@ int pmtc + case PHOTOMETRIC_LOGLUV: + return "CIELog2Luv"; + } +- sprintf(buf,"Unknonw Tag %d",pmtc); ++ sprintf(buf,"Unknown Tag %d",pmtc); + return buf; + } + +Index: trunk/imdi/greytiff.c +=================================================================== +--- trunk.orig/imdi/greytiff.c ++++ trunk/imdi/greytiff.c +@@ -131,7 +131,7 @@ int pmtc + case PHOTOMETRIC_LOGLUV: + return "CIELog2Luv"; + } +- sprintf(buf,"Unknonw Tag %d",pmtc); ++ sprintf(buf,"Unknown Tag %d",pmtc); + return buf; + } + +Index: trunk/link/collink.c +=================================================================== +--- trunk.orig/link/collink.c ++++ trunk/link/collink.c +@@ -1110,7 +1110,7 @@ void devip_devop(void *cntx, double *out + } + /* We've got the input profile PCS' at this point. */ + +- /* If we're transfering the K value from the input profile to the */ ++ /* If we're transferring the K value from the input profile to the */ + /* output, copy it into locus[], which will be given to the inverse */ + /* lookup function, else the inverse lookup will generate a K using */ + /* the curve parameters. */ +@@ -1192,7 +1192,7 @@ void devip_devop(void *cntx, double *out + if (p->verb) + #endif + { +- printf("White point hack mapped %f %f %f to %f %f %f, hit withing %f\n", ++ printf("White point hack mapped %f %f %f to %f %f %f, hit within %f\n", + p->in.wp[0],p->in.wp[1],p->in.wp[2],pcsv[0], pcsv[1], pcsv[2],dd); + fflush(stdout); + } +@@ -1242,7 +1242,7 @@ void devip_devop(void *cntx, double *out + if (p->nhack == 2) { + /* Ideally we would create a 4D PCSK -> PCSK gamut mapping */ + /* to smoothly and accurately cope with the changing source */ +- /* and destination gamuts acording to their degree of "K onlyness". */ ++ /* and destination gamuts according to their degree of "K onlyness". */ + /* In practice we're going to simply interpolated between */ + /* two extremes: unrestricted gamut and K only black gamut. */ + double map0[3], map1[3]; +@@ -4737,7 +4737,7 @@ main(int argc, char *argv[]) { + } + + if (li.verb) +- printf("Finished verfication\n"); ++ printf("Finished verification\n"); + + printf("Average error = %f%%, peak error = %f%%\n",aerr * 100.0/nerr, perr * 100.0); + printf("Input %f %f %f %f\n",pin[0], pin[1], pin[2], pin[3]); +Index: trunk/profile/printcal.c +=================================================================== +--- trunk.orig/profile/printcal.c ++++ trunk/profile/printcal.c +@@ -1294,7 +1294,7 @@ int main(int argc, char *argv[]) { + icmXYZ2Lab(&wht, wp->Lab, wp->XYZ); + } + +- /* Sort the channel acording to device value */ ++ /* Sort the channel according to device value */ + /* For a consistent result for identical device values, */ + /* secondary sort by inverse CIE value */ + //#define HEAP_COMPARE(A,B) ((A).dev < (B).dev) +Index: trunk/spectro/dispsup.c +=================================================================== +--- trunk.orig/spectro/dispsup.c ++++ trunk/spectro/dispsup.c +@@ -719,7 +719,7 @@ static int disprd_read_imp( + scb->serno = p->serno++; + scb->msec = msec_time(); + +- a1logd(p->log,1, "got reading %f %f %f, transfering to col\n", ++ a1logd(p->log,1, "got reading %f %f %f, transferring to col\n", + val.XYZ[0], val.XYZ[1], val.XYZ[2]); + + scb->mtype = val.mtype; +@@ -1239,7 +1239,7 @@ int disprd_ambient( + + /* Or something is wrong with instrument capabilities */ + } else { +- printf("No reasonable trigger mode avilable for this instrument\n"); ++ printf("No reasonable trigger mode available for this instrument\n"); + return 2; + } + +@@ -2342,7 +2342,7 @@ static int config_inst_displ(disprd *p) + /* Reset key meanings */ + inst_reset_uih(); + +- a1logd(p->log,1,"config_inst_displ suceeded\n"); ++ a1logd(p->log,1,"config_inst_displ succeeded\n"); + return 0; + } + +Index: trunk/gamut/gammap.c +=================================================================== +--- trunk.orig/gamut/gammap.c ++++ trunk/gamut/gammap.c +@@ -859,7 +859,7 @@ gammap *new_gammap( + #endif + if (gmi->bph == gmm_clipBP) { + +- /* Extend the target black point to accomodate the */ ++ /* Extend the target black point to accommodate the */ + /* bent or clipped destination space L* range */ + if (fabp[0] < dr_cs_bp[0]) { + t = (fabp[0] - dr_cs_wp[0])/(dr_cs_bp[0] - dr_cs_wp[0]); +Index: trunk/profile/profout.c +=================================================================== +--- trunk.orig/profile/profout.c ++++ trunk/profile/profout.c +@@ -1103,7 +1103,7 @@ make_output_icc( + if (iccver < icmVersion2_4) { + iccver = icmVersion2_4; /* Need 2.4.0 for Display intents */ + if (verb) +- fprintf(verbo,"Bumped ICC version to 2.4.0 to accomodate multiple Display intents\n"); ++ fprintf(verbo,"Bumped ICC version to 2.4.0 to accommodate multiple Display intents\n"); + } + } + if (wr_icco->set_version(wr_icco, iccver) != 0) +Index: trunk/render/thscreen.c +=================================================================== +--- trunk.orig/render/thscreen.c ++++ trunk/render/thscreen.c +@@ -636,7 +636,7 @@ thscreen *new_thscreen( + mrang = 65535.0/(t->oelev - 1.0); + DBG(("new_thscreen() raw modulation rande = %f\n",mrang)); + +- /* Modify the modulation range to accomodate any level overlap */ ++ /* Modify the modulation range to accommodate any level overlap */ + if (olap > 0.0 && t->oelev > 2) { + mrang = ((t->oelev - 2.0) * olap * mrang + 65535.0)/(t->oelev - 1.0); + DBG(("new_thscreen() modulation adjusted for overlap = %f\n",mrang)); +Index: trunk/xicc/xspect.c +=================================================================== +--- trunk.orig/xicc/xspect.c ++++ trunk/xicc/xspect.c +@@ -4530,7 +4530,7 @@ void xspect_plot10(xspect *sp, int n) { + /* Given an emission spectrum, set the UV output to the given level. */ + /* The shape of the UV is taken from FWA1_stim, and the level is */ + /* with respect to the Y of the input spectrum. */ +-/* The output range is extended to accomodate the UV wavelengths */ ++/* The output range is extended to accommodate the UV wavelengths */ + void xsp_setUV(xspect *out, xspect *in, double uvlevel) { + int i, xs, xe; + double ww, avg; +Index: trunk/spectro/ccxxmake.c +=================================================================== +--- trunk.orig/spectro/ccxxmake.c ++++ trunk/spectro/ccxxmake.c +@@ -398,7 +398,7 @@ int main(int argc, char *argv[]) { + /* COM port */ + } else if (argv[fa][1] == 'c') { + fa = nfa; +- if (na == NULL) usage(0,"Paramater expected following -c"); ++ if (na == NULL) usage(0,"Parameter expected following -c"); + comno = atoi(na); + if (comno < 1 || comno > 40) usage(0,"-c parameter %d out of range",comno); + +@@ -498,7 +498,7 @@ int main(int argc, char *argv[]) { + /* Serial port flow control */ + } else if (argv[fa][1] == 'W') { + fa = nfa; +- if (na == NULL) usage(0,"Paramater expected following -W"); ++ if (na == NULL) usage(0,"Parameter expected following -W"); + if (na[0] == 'n' || na[0] == 'N') + fc = fc_None; + else if (na[0] == 'h' || na[0] == 'H') +@@ -587,7 +587,7 @@ int main(int argc, char *argv[]) { + strcat(outname, doccss ? ".ccss" : ".ccmx"); + + if (fakeseq && doccss) +- error("Fake CCSS test not implemeted"); ++ error("Fake CCSS test not implemented"); + + printf("\n"); + +@@ -803,7 +803,7 @@ int main(int argc, char *argv[]) { + refs[i][2] = cols[i][2]; + } + gotref = 1; +- warning("Got two colorimetric files - assuming '%s' is the refrence",innames[0]); ++ warning("Got two colorimetric files - assuming '%s' is the reference",innames[0]); + refrmode = -1; + cbid = 0; + +Index: trunk/spectro/dispread.c +=================================================================== +--- trunk.orig/spectro/dispread.c ++++ trunk/spectro/dispread.c +@@ -413,7 +413,7 @@ int main(int argc, char *argv[]) { + /* COM port */ + } else if (argv[fa][1] == 'c') { + fa = nfa; +- if (na == NULL) usage(0,"Paramater expected following -c"); ++ if (na == NULL) usage(0,"Parameter expected following -c"); + comport = atoi(na); + if (comport < 1 || comport > 50) usage(0,"-c parameter %d out of range",comport); + +Index: trunk/spectro/fakeread.c +=================================================================== +--- trunk.orig/spectro/fakeread.c ++++ trunk/spectro/fakeread.c +@@ -814,7 +814,7 @@ int main(int argc, char *argv[]) + + /* We're assuming that the input space has a perfect black point... */ + +- /* Lookup the ouput black point in XYZ PCS. We're assuming monotonicity.. */ ++ /* Lookup the output black point in XYZ PCS. We're assuming monotonicity.. */ + bp[0] = bp[1] = bp[2] = 0.0; + oluo->lookup(oluo, bp, bp); + +@@ -827,7 +827,7 @@ int main(int argc, char *argv[]) + bt1886 == 1 ? egamma : tgamma, bt1886 == 1 ? 1 : 0); + + if (verb) +- printf("Gamma Curve: Using ouput black offset proportion %f\n",outoprop); ++ printf("Gamma Curve: Using output black offset proportion %f\n",outoprop); + + if (bt1886 == 1) { /* Using effective gamma */ + if (verb) +@@ -980,7 +980,7 @@ int main(int argc, char *argv[]) + else if (nmask == ICX_K && sep_ins == icSigCmykData) + gfudge = 2; + else if (icx_colorant_comb_match_icc(nmask, sep_ins) == 0) { +- error("Separation ICC device space '%s' dosen't match TI1 '%s'", ++ error("Separation ICC device space '%s' doesn't match TI1 '%s'", + icm2str(icmColorSpaceSignature, sep_ins), + ident); /* Should free(). */ + } +@@ -989,7 +989,7 @@ int main(int argc, char *argv[]) + if (icc_luo != NULL) { + /* Check if icc is compatible with .ti1 */ + if (sep_outs != ins) +- error("ICC device space '%s' dosen't match Separation ICC '%s'", ++ error("ICC device space '%s' doesn't match Separation ICC '%s'", + icm2str(icmColorSpaceSignature, ins), + icm2str(icmColorSpaceSignature, sep_outs)); + } else if (mlu != NULL) { +@@ -1014,12 +1014,12 @@ int main(int argc, char *argv[]) + else { + if (!revlookup) { + if (icx_colorant_comb_match_icc(nmask, ins) == 0) +- error("ICC device space '%s' dosen't match TI1 '%s'", ++ error("ICC device space '%s' doesn't match TI1 '%s'", + icm2str(icmColorSpaceSignature, ins), + ident); // Should free(). + } else { + if (icx_colorant_comb_match_icc(nmask, outs) == 0) +- error("ICC device space '%s' dosen't match TI1 '%s'", ++ error("ICC device space '%s' doesn't match TI1 '%s'", + icm2str(icmColorSpaceSignature, ins), + ident); // Should free(). + +Index: trunk/profile/invprofcheck.c +=================================================================== +--- trunk.orig/profile/invprofcheck.c ++++ trunk/profile/invprofcheck.c +@@ -98,7 +98,7 @@ void usage(void) { + fprintf(stderr," -k Show CIEDE2000 delta E values\n"); + fprintf(stderr," -w create %s visualisation (profile%s)\n",vrml_format(),vrml_ext()); + fprintf(stderr," -x Use %s axes\n",vrml_format()); +- fprintf(stderr," -e Color vectors acording to delta E\n"); ++ fprintf(stderr," -e Color vectors according to delta E\n"); + fprintf(stderr," profile.icm Profile to check\n"); + exit(1); + } +Index: trunk/profile/profcheck.c +=================================================================== +--- trunk.orig/profile/profcheck.c ++++ trunk/profile/profcheck.c +@@ -59,7 +59,7 @@ usage(void) { + fprintf(stderr," -w create %s visualisation (iccprofile%s)\n",vrml_format(),vrml_ext()); + fprintf(stderr," -x Use %s axes\n",vrml_format()); + fprintf(stderr," -m Make %s lines a minimum of 0.5\n",vrml_format()); +- fprintf(stderr," -e Color vectors acording to delta E\n"); ++ fprintf(stderr," -e Color vectors according to delta E\n"); + fprintf(stderr," -h Plot a histogram of delta E's\n"); + fprintf(stderr," -s Sort output by delta E\n"); + fprintf(stderr," -P N.NN Create a pruned .ti3 with points less or equal to N.NN delta E\n"); +Index: trunk/spectro/ccwin.c +=================================================================== +--- trunk.orig/spectro/ccwin.c ++++ trunk/spectro/ccwin.c +@@ -830,7 +830,7 @@ int ddebug /* >0 to print debug sta + return NULL; + } + +- debugr2((errout,"new_ccwin: return sucessfully\n")); ++ debugr2((errout,"new_ccwin: return successfully\n")); + + return p; + } +Index: trunk/profile/colverify.c +=================================================================== +--- trunk.orig/profile/colverify.c ++++ trunk/profile/colverify.c +@@ -69,7 +69,7 @@ usage(void) { + fprintf(stderr," -D Use D50 100.0 as L*a*b* white reference\n"); + fprintf(stderr," -c Show CIE94 delta E values\n"); + fprintf(stderr," -k Show CIEDE2000 delta E values\n"); +- fprintf(stderr," -h [hist.txt] Plot a histogram of delta E's [Optionaly save points to .txt]\n"); ++ fprintf(stderr," -h [hist.txt] Plot a histogram of delta E's [Optionally save points to .txt]\n"); + fprintf(stderr," -s Sort patch values by error\n"); + fprintf(stderr," -w create PCS %s vector visualisation (measured%s)\n",vrml_format(),vrml_ext()); + fprintf(stderr," -W create PCS %s marker visualisation (measured%s)\n",vrml_format(),vrml_ext()); +Index: trunk/spectro/ex1.c +=================================================================== +--- trunk.orig/spectro/ex1.c ++++ trunk/spectro/ex1.c +@@ -188,7 +188,7 @@ ex1_init_coms(inst *pp, baud_rate br, fl + + p->gotcoms = 1; + +- a1logd(p->log, 2, "ex1_init_coms: init coms has suceeded\n"); ++ a1logd(p->log, 2, "ex1_init_coms: init coms has succeeded\n"); + + return inst_ok; + } +@@ -929,7 +929,7 @@ ex1_interp_native_error(ex1 *p, int ec) + case EX1_FLASH_MAP: + return "Flash map is incompatible with firmware"; + case EX1_DEFERRED: +- return "Operation/Response deffered"; ++ return "Operation/Response deferred"; + default: + return NULL; + } +@@ -1279,7 +1279,7 @@ static int ex1_save_calibration(ex1 *p) + calf_wrspec(&x, p->sconf.idark[0]); + calf_wrspec(&x, p->sconf.idark[1]); + +- a1logd(p->log,3,"nbytes = %d, Checkum = 0x%x\n",x.nbytes,x.chsum); ++ a1logd(p->log,3,"nbytes = %d, Checksum = 0x%x\n",x.nbytes,x.chsum); + calf_wints(&x, (int *)(&x.chsum), 1); + + if (calf_done(&x)) +@@ -1466,7 +1466,7 @@ static void dump_command(ex1 *p, ORD8 *b + if (flags & EX1_FLAG_NACK) + a1logd(p->log, 0, " Negative acknowldgement response\n"); + if (flags & EX1_FLAG_EXPTN) +- a1logd(p->log, 0, " Exception occured\n"); ++ a1logd(p->log, 0, " Exception occurred\n"); + if (flags & EX1_FLAG_PVDEP) + a1logd(p->log, 0, " Protocol version is deprecated request\n"); + +@@ -1752,7 +1752,7 @@ int nd /* nz to disable debug message + } + + if (p->log->debug >= 8) { +- a1logd(p->log,1,"\nex1_command: RECIEVING:\n"); ++ a1logd(p->log,1,"\nex1_command: RECEIVING:\n"); + dump_command(p, buf, rwbytes, p->log->debug); + } + +Index: trunk/ccast/ccmes.c +=================================================================== +--- trunk.orig/ccast/ccmes.c ++++ trunk/ccast/ccmes.c +@@ -85,7 +85,7 @@ char *ccmessv_emes(ccmessv_err rv) { + return "ccmes: connection has been closed"; + } + +- return "Uknown ccmessv error"; ++ return "Unknown ccmessv error"; + } + + #if defined(LOWVERBTRACE) || defined(DEBUG) +Index: trunk/ccast/ccpacket.c +=================================================================== +--- trunk.orig/ccast/ccpacket.c ++++ trunk/ccast/ccpacket.c +@@ -133,7 +133,7 @@ char *ccpacket_emes(ccpacket_err rv) { + return "Packet: failed to read message"; + } + +- return "Uknown ccpacket error"; ++ return "Unknown ccpacket error"; + } + + /* Establish an ccpacket connection - implementation */ +@@ -187,13 +187,13 @@ static ccpacket_err connect_ccpacket_imp + #endif + if ((rv = setsockopt(p->sock, SOL_SOCKET, SO_RCVTIMEO, (const char*)&tv, + sizeof(tv))) < 0) { +- DBG((g_log,0,"setsockopt timout failed with %d, errno %d",rv,ERRNO)) ++ DBG((g_log,0,"setsockopt timeout failed with %d, errno %d",rv,ERRNO)) + return ccpacket_connect; + } + tv = 2000; + if ((rv = setsockopt(p->sock, SOL_SOCKET, SO_SNDTIMEO, (const char*)&tv, + sizeof(tv))) < 0) { +- DBG((g_log,0,"setsockopt timout failed with %d, errno %d",rv,ERRNO)) ++ DBG((g_log,0,"setsockopt timeout failed with %d, errno %d",rv,ERRNO)) + return ccpacket_connect; + } + #else +@@ -207,14 +207,14 @@ static ccpacket_err connect_ccpacket_imp + #endif + if ((rv = setsockopt(p->sock, SOL_SOCKET, SO_RCVTIMEO, (const char*)&tv, + sizeof(tv))) < 0) { +- DBG((g_log,0,"setsockopt timout failed with %d, errno %d",rv,ERRNO)) ++ DBG((g_log,0,"setsockopt timeout failed with %d, errno %d",rv,ERRNO)) + return ccpacket_connect; + } + tv.tv_sec = 2; + tv.tv_usec = 0; + if ((rv = setsockopt(p->sock, SOL_SOCKET, SO_SNDTIMEO, (const char*)&tv, + sizeof(tv))) < 0) { +- DBG((g_log,0,"setsockopt timout failed with %d, errno %d",rv,ERRNO)) ++ DBG((g_log,0,"setsockopt timeout failed with %d, errno %d",rv,ERRNO)) + return ccpacket_connect; + } + #endif +@@ -224,7 +224,7 @@ static ccpacket_err connect_ccpacket_imp + ling.l_linger = 2; /* Two seconds */ + if ((rv = setsockopt(p->sock, SOL_SOCKET, SO_LINGER, (const char*)&ling, + sizeof(ling))) < 0) { +- DBG((g_log,0,"setsockopt timout failed with %d, errno %d",rv,ERRNO)) ++ DBG((g_log,0,"setsockopt timeout failed with %d, errno %d",rv,ERRNO)) + return ccpacket_connect; + } + #endif /* NEVER */ +Index: trunk/spectro/xdg_bds.c +=================================================================== +--- trunk.orig/spectro/xdg_bds.c ++++ trunk/spectro/xdg_bds.c +@@ -873,7 +873,7 @@ char *xdg_errstr(xdg_error er) { + case xdg_nohome: + return "There is no $HOME"; + case xdg_noalluserprofile: +- return "Theres no $ALLUSERSPROFILE is no $ALLUSERSPROFILE"; ++ return "There's no $ALLUSERSPROFILE is no $ALLUSERSPROFILE"; + case xdg_nopath: + return "There is no resulting path"; + case xdg_mallformed: +Index: trunk/icc/icc.c +=================================================================== +--- trunk.orig/icc/icc.c ++++ trunk/icc/icc.c +@@ -1472,7 +1472,7 @@ static const char *string_TagSignature(i + case icSigViewingCondDescTag: + return "Viewing Condition Description"; + case icSigViewingConditionsTag: +- return "Viewing Condition Paramaters"; ++ return "Viewing Condition Parameters"; + + /* ArgyllCMS private tag: */ + case icmSigAbsToRelTransSpace: +@@ -5773,7 +5773,7 @@ int icmSetMultiLutTables( + return icp->errc = 1; + } + if (pp[tn]->ttype != p->ttype) { +- sprintf(icp->err,"icmSetMultiLutTables Tables have different Tage Type"); ++ sprintf(icp->err,"icmSetMultiLutTables Tables have different Tag Type"); + return icp->errc = 1; + } + +Index: trunk/gamut/isecvol.c +=================================================================== +--- trunk.orig/gamut/isecvol.c ++++ trunk/gamut/isecvol.c +@@ -174,7 +174,7 @@ printf("~1 doing triangle %d from %s gam + inout[i] = 0; + } + +-printf("~1 verticies outside = %d\n",nout); ++printf("~1 vertices outside = %d\n",nout); + + /* If none are in, skip this triangle */ + if (nout == 3) +Index: trunk/gamut/viewgam.c +=================================================================== +--- trunk.orig/gamut/viewgam.c ++++ trunk/gamut/viewgam.c +@@ -355,7 +355,7 @@ main(int argc, char *argv[]) { + error("Input file doesn't contain exactly two tables"); + + if ((nverts = pp->t[0].nsets) <= 0) +- error("No verticies"); ++ error("No vertices"); + if ((ntris = pp->t[1].nsets) <= 0) + error("No triangles"); + +Index: trunk/gamut/gamut.c +=================================================================== +--- trunk.orig/gamut/gamut.c ++++ trunk/gamut/gamut.c +@@ -2152,8 +2152,8 @@ static void check_triangulation(gamut *s + for (j = i+1; j < 3; j++) { + if (tp->v[i] == tp->v[j]) { + failed = 1; +- printf("Validation failed - duplicate verticies:\n"); +- printf("Triangle %d, has verticies %d %d %d\n", tp->n, tp->v[0]->n, tp->v[1]->n, tp->v[2]->n); ++ printf("Validation failed - duplicate vertices:\n"); ++ printf("Triangle %d, has vertices %d %d %d\n", tp->n, tp->v[0]->n, tp->v[1]->n, tp->v[2]->n); + fflush(stdout); + } + } +@@ -2165,7 +2165,7 @@ static void check_triangulation(gamut *s + if (tp->e[i] == tp->e[j]) { + failed = 1; + printf("Validation failed - duplicate connectivity:\n"); +- printf("Triangle %d, has verticies %d %d %d\n", tp->n, tp->v[0]->n, tp->v[1]->n, tp->v[2]->n); ++ printf("Triangle %d, has vertices %d %d %d\n", tp->n, tp->v[0]->n, tp->v[1]->n, tp->v[2]->n); + printf("Triangle %d, has edges %d %d %d\n", tp->n, tp->e[0]->n, tp->e[1]->n, tp->e[2]->n); + fflush(stdout); + } +@@ -2187,7 +2187,7 @@ static void check_triangulation(gamut *s + /* for this triangle is correct */ + if (ei1 != i) { + failed = 1; +- printf("Validation failed - triangle edge index doesn't match record withing edge:\n"); ++ printf("Validation failed - triangle edge index doesn't match record within edge:\n"); + printf("Triangle %d, edge index %d edge %d has record %d\n", tp->n, i, e->n, ei1); + fflush(stdout); + } +@@ -2206,9 +2206,9 @@ static void check_triangulation(gamut *s + if ((e->v[0] != tp->v[i] || e->v[1] != tp->v[(i+1) % 3]) + && (e->v[1] != tp->v[i] || e->v[0] != tp->v[(i+1) % 3])) { + failed = 1; +- printf("Validation failed - edge doesn't have same verticies as triangle expects:\n"); +- printf("Triangle %d, has verticies %d %d\n", tp->n, tp->v[i]->n, tp->v[(i+1) % 3]->n); +- printf("Edge %d, has verticies %d %d\n", e->n, e->v[0]->n, e->v[1]->n); ++ printf("Validation failed - edge doesn't have same vertices as triangle expects:\n"); ++ printf("Triangle %d, has vertices %d %d\n", tp->n, tp->v[i]->n, tp->v[(i+1) % 3]->n); ++ printf("Edge %d, has vertices %d %d\n", e->n, e->v[0]->n, e->v[1]->n); + fflush(stdout); + } + +@@ -2690,7 +2690,7 @@ gamut *s + ff[1] = fsz * foffs[i][0] + s->cent[1]; + ff[2] = fsz * foffs[i][1] + s->cent[2]; + if ((tvs[j++] = expand_gamut(s, ff)) == NULL) { +- fprintf(stderr,"gamut: internal error - failed to register a fake initial verticies!\n"); ++ fprintf(stderr,"gamut: internal error - failed to register a fake initial vertices!\n"); + exit (-1); + } + } +@@ -2699,7 +2699,7 @@ gamut *s + s->doingfake = 0; + + #ifdef NEVER +- printf("Initial verticies:\n"); ++ printf("Initial vertices:\n"); + for (i = 0; i < 4; i++) { + printf(" %d: %f %f %f\n",tvs[i]->n, tvs[i]->p[0], tvs[i]->p[1], tvs[i]->p[2]); + } +@@ -6427,7 +6427,7 @@ char *filename + + + if ((nverts = gam->t[0].nsets) <= 0) { +- fprintf(stderr,"No verticies"); ++ fprintf(stderr,"No vertices"); + return 1; + } + if ((ntris = gam->t[1].nsets) <= 0) { +Index: trunk/rspl/rev.c +=================================================================== +--- trunk.orig/rspl/rev.c ++++ trunk/rspl/rev.c +@@ -5868,7 +5868,7 @@ int sdi /* Sub-simplex dimensionali + x->face = 0; + + #ifdef DEBUG +- printf("Verticies = "); ++ printf("vertices = "); + for (i = 0; i <= sdi; i++) + printf("%d ",vcmb[i]); + printf("\n"); +@@ -9733,7 +9733,7 @@ rspl *s + vc.nilist = 0; + xlist = NULL; + +- DBG(("deleting verticies in all bxcells\n")); ++ DBG(("deleting vertices in all bxcells\n")); + + /* The thinning may have deleted verticies from bxcell's that */ + /* were not involved in the thinning, so go though all bxcells */ +@@ -9873,7 +9873,7 @@ rspl *s + //printf("~1 deleting vtx %d\n",vx->ix); + del_vtxrec_hash(&vc, vx->ix); + if (get_vtxrec(&vc, vx->ix) != NULL) +- error("get_vtxrec suceeded after del_vtxrec_hash!"); ++ error("get_vtxrec succeeded after del_vtxrec_hash!"); + } + #else /* !DELETE_SHAD */ + /* Keep track of deleted verticies that are in this bx, */ +@@ -10554,7 +10554,7 @@ rspl *s + } + } + printf("%d crossed triangles tested\n",notverts); +- printf("%d hidden verticies retained for crossed triangles\n",nopreserved); ++ printf("%d hidden vertices retained for crossed triangles\n",nopreserved); + printf("Took %f secs to preserving crossing triangless\n",0.001 * (msec_time()-lmsec)); + #endif + } /* End of preserve shadowed triangles */ +Index: trunk/spectro/munki.c +=================================================================== +--- trunk.orig/spectro/munki.c ++++ trunk/spectro/munki.c +@@ -113,7 +113,7 @@ munki_init_coms(inst *pp, baud_rate br, + return munki_interp_code(p, icoms2munki_err(se)); + } + +- a1logd(p->log, 2, "munki_init_coms: init coms has suceeded\n"); ++ a1logd(p->log, 2, "munki_init_coms: init coms has succeeded\n"); + + p->gotcoms = 1; + return inst_ok; +@@ -525,7 +525,7 @@ munki_interp_error(inst *pp, munki_code + case MUNKI_INT_CREATE_EEPROM_STORE: + return "Error in creating EEProm store"; + case MUNKI_INT_NEW_RSPL_FAILED: +- return "Creating RSPL object faild"; ++ return "Creating RSPL object failed"; + case MUNKI_INT_CAL_SAVE: + return "Unable to save calibration to file"; + case MUNKI_INT_CAL_RESTORE: +Index: trunk/spectro/i1pro.c +=================================================================== +--- trunk.orig/spectro/i1pro.c ++++ trunk/spectro/i1pro.c +@@ -119,7 +119,7 @@ i1pro_init_coms(inst *pp, baud_rate br, + return i1pro_interp_code(p, icoms2i1pro_err(se)); + } + +- a1logd(p->log, 2, "i1pro_init_coms: init coms has suceeded\n"); ++ a1logd(p->log, 2, "i1pro_init_coms: init coms has succeeded\n"); + + p->gotcoms = 1; + return inst_ok; +@@ -508,7 +508,7 @@ i1pro_interp_error(inst *pp, i1pro_code + case I1PRO_INT_EEPROM_DATA_MISSING: + return "EEProm data is missing"; + case I1PRO_INT_NEW_RSPL_FAILED: +- return "Creating RSPL object faild"; ++ return "Creating RSPL object failed"; + case I1PRO_INT_CAL_SAVE: + return "Unable to save calibration to file"; + case I1PRO_INT_CAL_RESTORE: +Index: trunk/xicc/mpp.c +=================================================================== +--- trunk.orig/xicc/mpp.c ++++ trunk/xicc/mpp.c +@@ -733,7 +733,7 @@ int use_fwa /* NZ to involke + error ("mpp->set_ilob, instrument doesn't have an FWA illuminent"); + + if (p->spc->set_fwa(p->spc, &inst, NULL, &white)) +- error ("mpp->set_ilob, set_fwa faild"); ++ error ("mpp->set_ilob, set_fwa failed"); + } + + return 0; +Index: trunk/plot/vrml.c +=================================================================== +--- trunk.orig/plot/vrml.c ++++ trunk/plot/vrml.c +@@ -642,7 +642,7 @@ double cc[3] /* Surface color, cc == NUL + fprintf(s->fp," ]\n"); + fprintf(s->fp," }\n"); + fprintf(s->fp,"\n"); +- fprintf(s->fp," coordIndex [ # Indexes of %s Verticies \n", ++ fprintf(s->fp," coordIndex [ # Indexes of %s Vertices \n", + lines ? "line" : "polygon"); + + /* Spit out the lines/triangles/quads */ +Index: trunk/target/ofps.c +=================================================================== +--- trunk.orig/target/ofps.c ++++ trunk/target/ofps.c +@@ -2612,7 +2612,7 @@ static int position_vtx( + if (tries > s->maxretries) + s->maxretries = tries; + #ifdef DEBUG +- printf(" - comb %s suceeded on retry %d (max %d)\n",pcomb(di,vv->nix),tries,s->maxretries); ++ printf(" - comb %s succeeded on retry %d (max %d)\n",pcomb(di,vv->nix),tries,s->maxretries); + printf(" oog = %f, eperr = %f, ceperr = %f\n",vv->oog,vv->eperr,vv->ceperr); + #endif + //if (tries > 10) +@@ -2627,7 +2627,7 @@ static int position_vtx( + + #ifdef DUMP_FERR /* Create .tiff of dnsq function error */ + if (tries >= DUMP_FERR) { +- printf("Suceeded on retry %d, dumping debug rasters\n",tries); ++ printf("Succeeded on retry %d, dumping debug rasters\n",tries); + + /* Re-run the last unsucessful dnsq, to trace the path */ + pcx.debug = 1; +@@ -6221,7 +6221,7 @@ static int ofps_findhit_vtxs(ofps *s, no + int hit = 0; + + if (nn->ix < 0) +- error("ofps_findhit_vtxs given gamut boudary node ix %d",nn->ix); ++ error("ofps_findhit_vtxs given gamut boundary node ix %d",nn->ix); + + #ifdef DEBUG + if (s->agrid_init == 0) +@@ -8023,7 +8023,7 @@ ofps *s + warning("Verify of incremental vertexes failed!"); + printf("Verify of incremental vertexes failed!\n"); + } else { +- warning("Verify of incremental vertexes suceeded!"); ++ warning("Verify of incremental vertexes succeeded!"); + } + #ifdef DUMP_STRUCTURE + dump_node_vtxs(s, 1); +@@ -8443,7 +8443,7 @@ int nopstop /* Debug - number of opti + fprintf(stderr,"Average dnsqs/position = %.2f\n",s->dnsqs/(double)s->positions); + fprintf(stderr,"Average function calls/dnsq = %.1f\n",s->funccount/(double)s->dnsqs); + fprintf(stderr,"Maximum function calls/dnsq = %d\n",s->maxfunc); +- fprintf(stderr,"Average function calls/sucessful dnsq = %.2f\n",s->sucfunc/(double)s->sucdnsq); ++ fprintf(stderr,"Average function calls/successful dnsq = %.2f\n",s->sucfunc/(double)s->sucdnsq); + fprintf(stderr,"Average function calls/position = %.1f\n",s->funccount/(double)s->positions); + fprintf(stderr,"Maximum tries for dnsq sucess %d\n",s->maxretries); + fprintf(stderr,"Number of position_vtx failures %d\n",s->posfails); +Index: trunk/spectro/synthread.c +=================================================================== +--- trunk.orig/spectro/synthread.c ++++ trunk/spectro/synthread.c +@@ -487,14 +487,14 @@ printf("~1 omax = %f %f %f\n", md.omax[0 + else if (nmask == ICX_K && sep_ins == icSigCmykData) + gfudge = 2; + else if (icx_colorant_comb_match_icc(nmask, sep_ins) == 0) { +- error("Separation ICC device space '%s' dosen't match TI1 '%s'", ++ error("Separation ICC device space '%s' doesn't match TI1 '%s'", + icm2str(icmColorSpaceSignature, sep_ins), + ident); /* Should free(). */ + } + + /* Check if separation ICC output is compatible with ICC/MPP/TI3 conversion */ + if (sep_outs != ins) +- error("Synthetic device space '%s' dosen't match Separation ICC '%s'", ++ error("Synthetic device space '%s' doesn't match Separation ICC '%s'", + icm2str(icmColorSpaceSignature, ins), + icm2str(icmColorSpaceSignature, sep_outs)); + } else { +@@ -504,7 +504,7 @@ printf("~1 omax = %f %f %f\n", md.omax[0 + else if (nmask == ICX_K && ins == icSigCmykData) + gfudge = 2; /* Should allow for other colorant combo's that include black */ + else if (icx_colorant_comb_match_icc(nmask, ins) == 0) { +- error("Synthetic device space '%s' dosen't match TI1 '%s'", ++ error("Synthetic device space '%s' doesn't match TI1 '%s'", + icm2str(icmColorSpaceSignature, ins), + ident); // Should free(). + } +Index: trunk/spectro/smcube.c +=================================================================== +--- trunk.orig/spectro/smcube.c ++++ trunk/spectro/smcube.c +@@ -292,7 +292,7 @@ smcube_init_coms(inst *pp, baud_rate br, + } + amutex_unlock(p->lock); + } +- a1logd(p->log, 2, "smcube_init_coms: init coms has suceeded\n"); ++ a1logd(p->log, 2, "smcube_init_coms: init coms has succeeded\n"); + + p->gotcoms = 1; + +@@ -1247,7 +1247,7 @@ smcube_get_idle_time(smcube *p, int *pit + itime = read_ORD16_be(buf + 4); + + if (!nd) +- a1logd(p->log, 2, "smcube_get_idle_time: returing %d\n",itime); ++ a1logd(p->log, 2, "smcube_get_idle_time: returning %d\n",itime); + + if (pitime != NULL) + *pitime = itime; +@@ -1292,11 +1292,11 @@ smcube_fact_measure(smcube *p, double *X + XYZ[0] = IEEE754todouble(read_ORD32_be(buf + 4)); + XYZ[1] = IEEE754todouble(read_ORD32_be(buf + 8)); + XYZ[2] = IEEE754todouble(read_ORD32_be(buf + 12)); +- a1logd(p->log, 2, "smcube_fact_measure: returing L*a*b* %f %f %f\n",XYZ[0], XYZ[1], XYZ[2]); ++ a1logd(p->log, 2, "smcube_fact_measure: returning L*a*b* %f %f %f\n",XYZ[0], XYZ[1], XYZ[2]); + + icmLab2XYZ(&icmD50_100, XYZ, XYZ); + +- a1logd(p->log, 2, "smcube_fact_measure: returing XYZ %f %f %f\n",XYZ[0], XYZ[1], XYZ[2]); ++ a1logd(p->log, 2, "smcube_fact_measure: returning XYZ %f %f %f\n",XYZ[0], XYZ[1], XYZ[2]); + + return inst_ok; + } +@@ -1338,7 +1338,7 @@ smcube_poll_measure(smcube *p, double to + p->XYZ[0] = IEEE754todouble(read_ORD32_be(buf + 4)); + p->XYZ[1] = IEEE754todouble(read_ORD32_be(buf + 8)); + p->XYZ[2] = IEEE754todouble(read_ORD32_be(buf + 12)); +- if (!nd) a1logd(p->log, 2, "smcube_poll_measure: returing L*a*b* %f %f %f\n",p->XYZ[0], p->XYZ[1], p->XYZ[2]); ++ if (!nd) a1logd(p->log, 2, "smcube_poll_measure: returning L*a*b* %f %f %f\n",p->XYZ[0], p->XYZ[1], p->XYZ[2]); + + icmLab2XYZ(&icmD50_100, p->XYZ, p->XYZ); + +@@ -2065,7 +2065,7 @@ int static smcube_save_calibration(smcub + calf_wtime_ts(&x, &p->gdate, 1); + calf_wdoubles(&x, p->goff, 3); + +- a1logd(p->log,3,"nbytes = %d, Checkum = 0x%x\n",x.nbytes,x.chsum); ++ a1logd(p->log,3,"nbytes = %d, Checksum = 0x%x\n",x.nbytes,x.chsum); + calf_wints(&x, (int *)(&x.chsum), 1); + + if (calf_done(&x)) +Index: trunk/spectro/kleink10.c +=================================================================== +--- trunk.orig/spectro/kleink10.c ++++ trunk/spectro/kleink10.c +@@ -728,7 +728,7 @@ int ix /* Klein calibration index 1 + + if (buf[0] != 'D' || buf[1] != '1') { + amutex_unlock(p->lock); +- a1logd(p->log, 1, "k10_read_cal_matrix: didn't get echo'd commad D1\n"); ++ a1logd(p->log, 1, "k10_read_cal_matrix: didn't get echo'd command D1\n"); + return inst_protocol_error; + } + +@@ -2067,7 +2067,7 @@ int *pinstmsec) { /* Return instrument r + break; + } + +- a1logd(p->log, 2, "k10_meas_delay: stoped at sample %d time %f\n",i,samp[i].sec); ++ a1logd(p->log, 2, "k10_meas_delay: stopped at sample %d time %f\n",i,samp[i].sec); + + /* Compute overall delay */ + dispmsec = (int)(samp[i].sec * 1000.0 + 0.5); +Index: trunk/spectro/i1d3.c +=================================================================== +--- trunk.orig/spectro/i1d3.c ++++ trunk/spectro/i1d3.c +@@ -2503,7 +2503,7 @@ i1d3_init_coms(inst *pp, baud_rate br, f + a1logd(p->log, 1, "i1d3_init_coms: failed with rv = 0x%x\n",ev); + return ev; + } +- a1logd(p->log, 2, "i1d3_init_coms: suceeded\n"); ++ a1logd(p->log, 2, "i1d3_init_coms: succeeded\n"); + + p->gotcoms = 1; + return inst_ok; +@@ -3179,7 +3179,7 @@ int *pinstmsec) { /* Return instrumen + break; + } + +- a1logd(p->log, 2, "i1d3_meas_delay: stoped at sample %d time %f\n",i,samp[i].sec); ++ a1logd(p->log, 2, "i1d3_meas_delay: stopped at sample %d time %f\n",i,samp[i].sec); + + /* Compute overall delay */ + dispmsec = (int)(samp[i].sec * 1000.0 + 0.5); +Index: trunk/spectro/i1disp.c +=================================================================== +--- trunk.orig/spectro/i1disp.c ++++ trunk/spectro/i1disp.c +@@ -1359,7 +1359,7 @@ i1disp_read_refrate( + *ref_rate = rrate; + return inst_ok; + } else { +- a1logd(p->log, 3, "No discernable refresh frequency measured\n"); ++ a1logd(p->log, 3, "No discernible refresh frequency measured\n"); + if (ref_rate != NULL) + *ref_rate = 0.0; + return inst_misread; +Index: trunk/ccast/ccmdns.c +=================================================================== +--- trunk.orig/ccast/ccmdns.c ++++ trunk/ccast/ccmdns.c +@@ -458,7 +458,7 @@ static int init_receive_mDNS(SOCKET *pso + DWORD tv; + tv = 100; + if (setsockopt(sock, SOL_SOCKET, SO_RCVTIMEO, (const char*)&tv, sizeof(tv)) < 0) { +- DBG((g_log,0,"setsockopt timout failed with %d\n",ERRNO)) ++ DBG((g_log,0,"setsockopt timeout failed with %d\n",ERRNO)) + closesocket(sock); + return 1; + } +@@ -469,7 +469,7 @@ static int init_receive_mDNS(SOCKET *pso + tv.tv_sec = 0; + tv.tv_usec = 100 * 1000; + if (setsockopt(sock, SOL_SOCKET, SO_RCVTIMEO, (const char*)&tv, sizeof(tv)) < 0) { +- DBG((g_log,0,"setsockopt timout failed with %d\n",ERRNO)) ++ DBG((g_log,0,"setsockopt timeout failed with %d\n",ERRNO)) + closesocket(sock); + return 1; + } +Index: trunk/spectro/spyd2.c +=================================================================== +--- trunk.orig/spectro/spyd2.c ++++ trunk/spectro/spyd2.c +@@ -2915,7 +2915,7 @@ spyd2_init_coms(inst *pp, baud_rate br, + return spyd2_interp_code((inst *)p, icoms2spyd2_err(se)); + } + +- a1logd(p->log, 2, "spyd2_init_coms: suceeded\n"); ++ a1logd(p->log, 2, "spyd2_init_coms: succeeded\n"); + + p->gotcoms = 1; + return inst_ok; +@@ -3372,9 +3372,9 @@ spyd2_interp_error(inst *pp, int ec) { + case SPYD2_BADREADSIZE: + return "Didn't read expected amount of data"; + case SPYD2_TRIGTIMEOUT: +- return "Trigger timout"; ++ return "Trigger timeout"; + case SPYD2_OVERALLTIMEOUT: +- return "Overall timout"; ++ return "Overall timeout"; + case SPYD2_BAD_EE_CRC: + return "Serial EEProm CRC failed"; + +Index: trunk/spectro/specbos.c +=================================================================== +--- trunk.orig/spectro/specbos.c ++++ trunk/spectro/specbos.c +@@ -340,7 +340,7 @@ specbos_init_coms(inst *pp, baud_rate br + a1logd(p->log, 2, "specbos_init_coms: unrecognised model %04d\n",p->model); + return inst_unknown_model; + } +- a1logd(p->log, 2, "specbos_init_coms: init coms has suceeded\n"); ++ a1logd(p->log, 2, "specbos_init_coms: init coms has succeeded\n"); + + p->gotcoms = 1; + +@@ -1559,7 +1559,7 @@ char id[CALIDLEN] /* Condition identifi + if ((ev = specbos_get_n_a_cals((inst *)p, &needed, &available)) != inst_ok) + return ev; + +- a1logd(p->log,4,"specbos_calibrate: needed 0x%x, avaialble 0x%x\n",needed, available); ++ a1logd(p->log,4,"specbos_calibrate: needed 0x%x, available 0x%x\n",needed, available); + + /* Translate inst_calt_all/needed into something specific */ + if (*calt == inst_calt_all +Index: trunk/plot/plot.c +=================================================================== +--- trunk.orig/plot/plot.c ++++ trunk/plot/plot.c +@@ -2434,7 +2434,7 @@ static void dprintf(char *fmt, ...) { + printf("~1 found NtQueryInformationProcess\n"); fflush(stdout); + if(NtQueryInformationProcess(GetCurrentProcess(), 0, + &pbi, sizeof(pbi), &ulSize) >= 0 && ulSize == sizeof(pbi)) { +-printf("~1 NtQueryInformationProcess suceeded\n"); fflush(stdout); ++printf("~1 NtQueryInformationProcess succeeded\n"); fflush(stdout); + + *(FARPROC *)&AttachConsole = + GetProcAddress(LoadLibraryA("kernel32.dll"), "AttachConsole"); +Index: trunk/spectro/dtp22.c +=================================================================== +--- trunk.orig/spectro/dtp22.c ++++ trunk/spectro/dtp22.c +@@ -277,7 +277,7 @@ dtp22_init_coms(inst *pp, baud_rate br, + return inst_coms_fail; + } + +- a1logd(p->log, 2, "dtp22_init_coms: init coms has suceeded\n"); ++ a1logd(p->log, 2, "dtp22_init_coms: init coms has succeeded\n"); + + p->gotcoms = 1; + return inst_ok; +Index: trunk/spectro/dtp41.c +=================================================================== +--- trunk.orig/spectro/dtp41.c ++++ trunk/spectro/dtp41.c +@@ -255,7 +255,7 @@ dtp41_init_coms(inst *pp, baud_rate br, + return inst_coms_fail; + } + +- a1logd(p->log, 2, "dtp41_init_coms: init coms has suceeded\n"); ++ a1logd(p->log, 2, "dtp41_init_coms: init coms has succeeded\n"); + + p->gotcoms = 1; + return inst_ok; +Index: trunk/xicc/xutils.c +=================================================================== +--- trunk.orig/xicc/xutils.c ++++ trunk/xicc/xutils.c +@@ -147,7 +147,7 @@ icc *read_embedded_icc(char *file_name) + TIFFSetWarningHandler(oldwarnh); + TIFFSetErrorHandlerExt(olderrhx); + TIFFSetWarningHandlerExt(oldwarnhx); +- debug("TIFFOpen suceeded\n"); ++ debug("TIFFOpen succeeded\n"); + + if (TIFFGetField(rh, TIFFTAG_ICCPROFILE, &size, &tag) == 0 || size == 0) { + debug2((errout,"no ICC profile found in '%s'\n",file_name)); +Index: trunk/spectro/rspec.c +=================================================================== +--- trunk.orig/spectro/rspec.c ++++ trunk/spectro/rspec.c +@@ -955,7 +955,7 @@ int calf_open(calf *x, a1log *log, char + } + xdg_free(cal_paths, no_paths); + +- a1logd(x->log,2,"calf_open: suceeded\n"); ++ a1logd(x->log,2,"calf_open: succeeded\n"); + + return 0; + } +Index: trunk/spectro/chartread.c +=================================================================== +--- trunk.orig/spectro/chartread.c ++++ trunk/spectro/chartread.c +@@ -1172,7 +1172,7 @@ printf("~1 using emis mode\n"); + + /* Or something is wrong with instrument capabilities */ + } else { +- printf("\nNo reasonable trigger mode avilable for this instrument\n"); ++ printf("\nNo reasonable trigger mode available for this instrument\n"); + it->del(it); + return -1; + } +@@ -1685,7 +1685,7 @@ printf("~1 using emis mode\n"); + + /* Or something is wrong with instrument capabilities */ + } else { +- printf("\nNo reasonable trigger mode avilable for this instrument\n"); ++ printf("\nNo reasonable trigger mode available for this instrument\n"); + it->del(it); + return -1; + } +Index: trunk/spectro/illumread.c +=================================================================== +--- trunk.orig/spectro/illumread.c ++++ trunk/spectro/illumread.c +@@ -663,7 +663,7 @@ int main(int argc, char *argv[]) + + /* Or something is wrong with instrument capabilities */ + } else { +- printf("!!! No reasonable trigger mode avilable for this instrument !!!\n"); ++ printf("!!! No reasonable trigger mode available for this instrument !!!\n"); + continue; + } + if ((rv = it->get_set_opt(it, trigmode)) != inst_ok) { +Index: trunk/profile/mppprof.c +=================================================================== +--- trunk.orig/profile/mppprof.c ++++ trunk/profile/mppprof.c +@@ -582,7 +582,7 @@ make_output_mpp( + + /* Estimate the ink mixing model */ + if (omix) { +- printf("The ink mixing model isn't implimented here yet\n"); ++ printf("The ink mixing model isn't implemented here yet\n"); + } + + /* create and write the cgats profile */ |