diff options
Diffstat (limited to 'debian')
84 files changed, 6454 insertions, 0 deletions
diff --git a/debian/README.Debian b/debian/README.Debian new file mode 100644 index 0000000..b707ba4 --- /dev/null +++ b/debian/README.Debian @@ -0,0 +1,16 @@ +argyll for Debian +----------------- + +Notes for KFreeBSD-*: + +From spectro/usbio_bsd.c: + + !!!! This driver is incomplete and non-functional !!!! + BSD uses fd per end point, so simplifies things. + No clear ep or abort i/o though, so we could try clear halt, + or close fd and see if that works in aborting transaction ? + Posix aio would probably work, but it's not loaded by default :-( + Could use libusb20 API, but not backwards or cross compatible, + and is very likely to be buggy ? + + -- Jörg Frings-Fürst <debian@jff-webhosting.net> Mon, 29 Sep 2014 09:17:15 +0200 diff --git a/debian/argyll-dbg.postinst b/debian/argyll-dbg.postinst new file mode 100644 index 0000000..66ce5b3 --- /dev/null +++ b/debian/argyll-dbg.postinst @@ -0,0 +1,40 @@ +#!/bin/sh +# +# see: dh_installdeb(1) + +set -e + +# summary of how this script can be called: +# * <postinst> `configure' <most-recently-configured-version> +# * <old-postinst> `abort-upgrade' <new version> +# * <conflictor's-postinst> `abort-remove' `in-favour' <package> +# <new-version> +# * <postinst> `abort-remove' +# * <deconfigured's-postinst> `abort-deconfigure' `in-favour' +# <failed-install-package> <version> `removing' +# <conflicting-package> <version> +# for details, see http://www.debian.org/doc/debian-policy/ or +# the debian-policy package + +# source debconf library +#. /usr/share/debconf/confmodule + + +case "$1" in + + configure|abort-upgrade|abort-remove|abort-deconfigure) + # Replace documentation directory symlink + dpkg-maintscript-helper symlink_to_dir /usr/share/doc/argyll-dbg /usr/share/doc/argyll-doc 1.6.3-2~ -- "$@" + ;; + + *) + echo "postinst called with unknown argument \`$1'" >&2 + exit 1 + ;; + +esac + +#DEBHELPER# + + +exit 0 diff --git a/debian/argyll-dbg.postrm b/debian/argyll-dbg.postrm new file mode 100644 index 0000000..0ebb9d3 --- /dev/null +++ b/debian/argyll-dbg.postrm @@ -0,0 +1,33 @@ +#! /bin/sh +# postrm script for argyll +# +# see: dh_installdeb(1) + +set -e + +# summary of how this script can be called: +# * <postrm> `remove' +# * <postrm> `purge' +# * <old-postrm> `upgrade' <new-version> +# * <new-postrm> `failed-upgrade' <old-version> +# * <new-postrm> `abort-install' +# * <new-postrm> `abort-install' <old-version> +# * <new-postrm> `abort-upgrade' <old-version> +# * <disappearer's-postrm> `disappear' <r>overwrit>r> <new-version> +# for details, see /usr/share/doc/packaging-manual/ + +case "$1" in + purge|remove|upgrade|failed-upgrade|abort-install|abort-upgrade|disappear) + dpkg-maintscript-helper symlink_to_dir /usr/share/doc/argyll-dbg /usr/share/doc/argyll-doc 1.6.3-2~ -- "$@" + ;; + + *) + echo "postrm called with unknown argument \`$1'" >&2 + exit 0 + +esac + +# dh_installdeb will replace this with shell code automatically +# generated by other debhelper scripts. + +#DEBHELPER# diff --git a/debian/argyll-dbg.preinst b/debian/argyll-dbg.preinst new file mode 100644 index 0000000..94caee7 --- /dev/null +++ b/debian/argyll-dbg.preinst @@ -0,0 +1,31 @@ +#!/bin/sh +# preinst script for #PACKAGE# +# +# see: dh_installdeb(1) + +set -e + +# summary of how this script can be called: +# * <new-preinst> `install' +# * <new-preinst> `install' <old-version> +# * <new-preinst> `upgrade' <old-version> +# * <old-preinst> `abort-upgrade' <new-version> +# for details, see http://www.debian.org/doc/debian-policy/ or +# the debian-policy package + +case "$1" in + install|upgrade|abort-upgrade) + dpkg-maintscript-helper symlink_to_dir /usr/share/doc/argyll-dbg /usr/share/doc/argyll-doc 1.6.3-2~ -- "$@" + ;; + *) + echo "preinst called with unknown argument \`$1'" >&2 + exit 1 + ;; +esac + +# dh_installdeb will replace this with shell code automatically +# generated by other debhelper scripts. + +#DEBHELPER# + +exit 0 diff --git a/debian/argyll-doc.doc-base b/debian/argyll-doc.doc-base new file mode 100644 index 0000000..962b063 --- /dev/null +++ b/debian/argyll-doc.doc-base @@ -0,0 +1,7 @@ +Document: argyll +Title: Argyll Documentation +Section: Graphics + +Format: HTML +Index: /usr/share/doc/argyll-doc/ArgyllDoc.html +Files: /usr/share/doc/argyll-doc/*.html diff --git a/debian/argyll-doc.docs b/debian/argyll-doc.docs new file mode 100644 index 0000000..f7d7b3b --- /dev/null +++ b/debian/argyll-doc.docs @@ -0,0 +1,2 @@ +doc/* +Readme.txt diff --git a/debian/argyll-ref.install b/debian/argyll-ref.install new file mode 100644 index 0000000..beefdac --- /dev/null +++ b/debian/argyll-ref.install @@ -0,0 +1 @@ +usr/share/color/argyll/ref diff --git a/debian/argyll-ref.postinst b/debian/argyll-ref.postinst new file mode 100644 index 0000000..5584c80 --- /dev/null +++ b/debian/argyll-ref.postinst @@ -0,0 +1,40 @@ +#!/bin/sh +# +# see: dh_installdeb(1) + +set -e + +# summary of how this script can be called: +# * <postinst> `configure' <most-recently-configured-version> +# * <old-postinst> `abort-upgrade' <new version> +# * <conflictor's-postinst> `abort-remove' `in-favour' <package> +# <new-version> +# * <postinst> `abort-remove' +# * <deconfigured's-postinst> `abort-deconfigure' `in-favour' +# <failed-install-package> <version> `removing' +# <conflicting-package> <version> +# for details, see http://www.debian.org/doc/debian-policy/ or +# the debian-policy package + +# source debconf library +#. /usr/share/debconf/confmodule + + +case "$1" in + + configure|abort-upgrade|abort-remove|abort-deconfigure) + # Replace documentation directory symlink + dpkg-maintscript-helper symlink_to_dir /usr/share/doc/argyll-ref /usr/share/doc/argyll-doc 1.6.3-2~ -- "$@" + ;; + + *) + echo "postinst called with unknown argument \`$1'" >&2 + exit 1 + ;; + +esac + +#DEBHELPER# + + +exit 0 diff --git a/debian/argyll-ref.postrm b/debian/argyll-ref.postrm new file mode 100644 index 0000000..3741e51 --- /dev/null +++ b/debian/argyll-ref.postrm @@ -0,0 +1,33 @@ +#! /bin/sh +# postrm script for argyll +# +# see: dh_installdeb(1) + +set -e + +# summary of how this script can be called: +# * <postrm> `remove' +# * <postrm> `purge' +# * <old-postrm> `upgrade' <new-version> +# * <new-postrm> `failed-upgrade' <old-version> +# * <new-postrm> `abort-install' +# * <new-postrm> `abort-install' <old-version> +# * <new-postrm> `abort-upgrade' <old-version> +# * <disappearer's-postrm> `disappear' <r>overwrit>r> <new-version> +# for details, see /usr/share/doc/packaging-manual/ + +case "$1" in + purge|remove|upgrade|failed-upgrade|abort-install|abort-upgrade|disappear) + dpkg-maintscript-helper symlink_to_dir /usr/share/doc/argyll-ref /usr/share/doc/argyll-doc 1.6.3-2~ -- "$@" + ;; + + *) + echo "postrm called with unknown argument \`$1'" >&2 + exit 0 + +esac + +# dh_installdeb will replace this with shell code automatically +# generated by other debhelper scripts. + +#DEBHELPER# diff --git a/debian/argyll-ref.preinst b/debian/argyll-ref.preinst new file mode 100644 index 0000000..d5fdfc6 --- /dev/null +++ b/debian/argyll-ref.preinst @@ -0,0 +1,31 @@ +#!/bin/sh +# preinst script for #PACKAGE# +# +# see: dh_installdeb(1) + +set -e + +# summary of how this script can be called: +# * <new-preinst> `install' +# * <new-preinst> `install' <old-version> +# * <new-preinst> `upgrade' <old-version> +# * <old-preinst> `abort-upgrade' <new-version> +# for details, see http://www.debian.org/doc/debian-policy/ or +# the debian-policy package + +case "$1" in + install|upgrade|abort-upgrade) + dpkg-maintscript-helper symlink_to_dir /usr/share/doc/argyll-ref /usr/share/doc/argyll-doc 1.6.3-2~ -- "$@" + ;; + *) + echo "preinst called with unknown argument \`$1'" >&2 + exit 1 + ;; +esac + +# dh_installdeb will replace this with shell code automatically +# generated by other debhelper scripts. + +#DEBHELPER# + +exit 0 diff --git a/debian/argyll.install b/debian/argyll.install new file mode 100644 index 0000000..0b1afee --- /dev/null +++ b/debian/argyll.install @@ -0,0 +1,3 @@ +usb/55-Argyll.rules lib/udev/rules.d/ +usb/Argyll.usermap etc/hotplug/usb +usr/bin/* diff --git a/debian/argyll.manpages b/debian/argyll.manpages new file mode 100644 index 0000000..13cdaf4 --- /dev/null +++ b/debian/argyll.manpages @@ -0,0 +1 @@ +debian/man/*.1 diff --git a/debian/argyll.postinst b/debian/argyll.postinst new file mode 100644 index 0000000..7621237 --- /dev/null +++ b/debian/argyll.postinst @@ -0,0 +1,40 @@ +#!/bin/sh +# +# see: dh_installdeb(1) + +set -e + +# summary of how this script can be called: +# * <postinst> `configure' <most-recently-configured-version> +# * <old-postinst> `abort-upgrade' <new version> +# * <conflictor's-postinst> `abort-remove' `in-favour' <package> +# <new-version> +# * <postinst> `abort-remove' +# * <deconfigured's-postinst> `abort-deconfigure' `in-favour' +# <failed-install-package> <version> `removing' +# <conflicting-package> <version> +# for details, see http://www.debian.org/doc/debian-policy/ or +# the debian-policy package + +# source debconf library +#. /usr/share/debconf/confmodule + + +case "$1" in + + configure|abort-upgrade|abort-remove|abort-deconfigure) + # Replace documentation directory symlink + dpkg-maintscript-helper symlink_to_dir /usr/share/doc/argyll /usr/share/doc/argyll-doc 1.6.3-2~ -- "$@" + ;; + + *) + echo "postinst called with unknown argument \`$1'" >&2 + exit 1 + ;; + +esac + +#DEBHELPER# + + +exit 0 diff --git a/debian/argyll.postrm b/debian/argyll.postrm new file mode 100644 index 0000000..f9614cb --- /dev/null +++ b/debian/argyll.postrm @@ -0,0 +1,34 @@ +#! /bin/sh +# postrm script for argyll +# +# see: dh_installdeb(1) + +set -e + +# summary of how this script can be called: +# * <postrm> `remove' +# * <postrm> `purge' +# * <old-postrm> `upgrade' <new-version> +# * <new-postrm> `failed-upgrade' <old-version> +# * <new-postrm> `abort-install' +# * <new-postrm> `abort-install' <old-version> +# * <new-postrm> `abort-upgrade' <old-version> +# * <disappearer's-postrm> `disappear' <r>overwrit>r> <new-version> +# for details, see /usr/share/doc/packaging-manual/ + +case "$1" in + purge|remove|upgrade|failed-upgrade|abort-install|abort-upgrade|disappear) + rm -rf /var/lib/argyll + dpkg-maintscript-helper symlink_to_dir /usr/share/doc/argyll /usr/share/doc/argyll-doc 1.6.3-2~ -- "$@" + ;; + + *) + echo "postrm called with unknown argument \`$1'" >&2 + exit 0 + +esac + +# dh_installdeb will replace this with shell code automatically +# generated by other debhelper scripts. + +#DEBHELPER# diff --git a/debian/argyll.preinst b/debian/argyll.preinst new file mode 100644 index 0000000..a3bdca6 --- /dev/null +++ b/debian/argyll.preinst @@ -0,0 +1,32 @@ +#!/bin/sh +# preinst script for #PACKAGE# +# +# see: dh_installdeb(1) + +set -e + +# summary of how this script can be called: +# * <new-preinst> `install' +# * <new-preinst> `install' <old-version> +# * <new-preinst> `upgrade' <old-version> +# * <old-preinst> `abort-upgrade' <new-version> +# for details, see http://www.debian.org/doc/debian-policy/ or +# the debian-policy package + + +case "$1" in + install|upgrade|abort-upgrade) + dpkg-maintscript-helper symlink_to_dir /usr/share/doc/argyll /usr/share/doc/argyll-doc 1.6.3-2~ -- "$@" + ;; + *) + echo "preinst called with unknown argument \`$1'" >&2 + exit 1 + ;; +esac + +# dh_installdeb will replace this with shell code automatically +# generated by other debhelper scripts. + +#DEBHELPER# + +exit 0 diff --git a/debian/changelog b/debian/changelog new file mode 100644 index 0000000..fe73751 --- /dev/null +++ b/debian/changelog @@ -0,0 +1,695 @@ +argyll (1.8.0+repack-1) unstable; urgency=low + + * New upstream release. + * Refresh patches: + - debian/patches/15_jam.patch + - debian/patches/100_spelling.patch + - debian/patches/110_dispwin_segfault.patch + * debian/rules: + - Rewrite VERSION sniplet. + - get-orig-source: + + Remove executable flag from source. + * Refresh debian/copyright. + + -- Jörg Frings-Fürst <debian@jff-webhosting.net> Sun, 23 Aug 2015 17:27:26 +0200 + +argyll (1.7.0+repack-4) unstable; urgency=medium + + * debian/rules: + - Add --utc to the command date for CRDATE to make the results + reproducible over different timezones. + * New debian/patches/30_gcc5.patch: + - Add gcc-5 support (Closes: #777779). + + Thanks to James Cowgill <james410@cowgill.org.uk>. + * Re-enable and refresh debian/patches/20_hurd_PATH_MAX.patch. + + -- Jörg Frings-Fürst <debian@jff-webhosting.net> Sun, 05 Jul 2015 12:30:03 +0200 + +argyll (1.7.0+repack-3) unstable; urgency=medium + + * debian/watch: + - change opts to support for "+repack". + * debian/patches/15_jam.patch: + - Add support for mips64el (Closes: #788447). + * debian/control: + - Correct some priorities. + - Remove package icc-utils because last version + in stable is greater then 1.6.3-1. + * Remove useless debian/argyll.lintian-overrides. + + -- Jörg Frings-Fürst <debian@jff-webhosting.net> Fri, 12 Jun 2015 12:13:59 +0200 + +argyll (1.7.0+repack-2) unstable; urgency=medium + + * debian/patches/15_jam.patch: + - Rewrite rules to find libraries on all architectures. + * debian/control: + - Add zlib1g-dev to Build-Depends. + + -- Jörg Frings-Fürst <debian@jff-webhosting.net> Mon, 04 May 2015 10:15:34 +0200 + +argyll (1.7.0+repack-1) unstable; urgency=low + + * Set package type to +repack. + * debian/control: + - Add libpng12-dev to build-Depends. + - Set Priority to optional. + - At package icc-utils and argyll-dbg set the Priority to extra. + * Make debian/man/scanin.1 more readable (LP: #1192368). + * Make build results reproducible: + - debian/rules: + + Replace build timestamps from ref files with date/time from + debian/changelog. + - debian/control: + + Add dpkg-dev to Build-Depends. + * debian/rules: + - get-orig-source: + + Remove unwanted Windows binaries. + + Remove unused sources: tiff, jpeg, zlib, png. + - Add ls2ti3 to build-manpages. + - New override_dh_compress: + + Don't compress html files. + * debian/copyright: + - Remove unused tags. + - Add new files. + - Set year 2015. + - Reorder files to prevend lintian warnings. + * Remove patches: + - 120_usb-db_new.patch applied upstream. + - 20_hurd_PATH_MAX.patch & 25_kfreebsd.patch not more needed. + + -- Jörg Frings-Fürst <debian@jff-webhosting.net> Sun, 03 May 2015 19:36:05 +0200 + +argyll (1.6.3-4) unstable; urgency=medium + + * debian/control: + - On package argyll replace the wrong Replaces & Conflicts of argyll-bin + with the right Breaks & Replaces to icc-utils (<< 1.6.3-1). + (Closes: #767837) + + -- Jörg Frings-Fürst <debian@jff-webhosting.net> Tue, 04 Nov 2014 07:59:20 +0100 + +argyll (1.6.3-3) unstable; urgency=medium + + * debian/control: + - Replace Architecture: any with linux-any to prevent KFreeBSD-* and + hurd-i386 from build during unusable usb system (Closes: #762773). + + -- Jörg Frings-Fürst <debian@jff-webhosting.net> Sun, 05 Oct 2014 19:31:16 +0200 + +argyll (1.6.3-2) unstable; urgency=medium + + * debian/control: + - Bump Standards-Version to 3.9.6 (no changes required). + - Add Replaces: argyll (<< 1.6.3-1) and + Breaks (<< 1.6.3-1) to argyll-ref (Closes: #762780). + - At argyll move argyll-doc from Depends to Suggests (Closes: #762850). + - Remove from Build-Depends libusbhid-dev [kfreebsd-any]. + - Remove ${shlibs:Depends} from Depends on argyll-doc and argyll-ref. + * debian/patches/15_jam.patch: + - To avoid use of the builtin libtiff and libjpeg add multiarch directories + for searching libraries and header files by using DEB_HOST_MULTIARCH + (Closes: #762772). + * New debian/patches/20_hurd_PATH_MAX.patch: + - Add missing PATH_MAX for hurd-i386 (Closes: #762774). + * debian/rules: + - Remove the move of the html docs into a subdirectory (Closes: #762771). + - Remove useless BUILTIN_TIFF=false from JAMCMDLINE. + - Remove "-A --link-doc=argyll-doc" from dh_installdocs (Closes: #762853). + * debian/*.(postinst|preinst|postrm): + - Replace dpkg-maintscript-helper dir_to_symlink to sysmlink_to_dir. + * Remove useless debian/argyll.examples + * Remove obsolete debian/patches/03_usb-db.diff. + * New debian/patches/120_usb-db_new.patch: (Closes: #762887) + - Instead of the obsolete usb-db use the builtin hwdb in the udev rules. + Thanks to Michael Biebl <biebl@debian.org> + * New debian/patches/25_kfreebsd.patch: + - Prevent build errors on kfreebsd-* (Closes: #762773). + Thanks to Steven Chamberlain <steven@pyro.eu.org> + * New debian/README.debian with notes to KFreeBSD-*. + + -- Jörg Frings-Fürst <debian@jff-webhosting.net> Mon, 29 Sep 2014 09:22:15 +0200 + +argyll (1.6.3-1) unstable; urgency=medium + + * New Maintainer (Closes: #720178). + * New upstream release (Closes: #742658). + * debian/rules: + - Add get-orig-source. + - Remove useless --with quilt from dh $@ + - Remove section for not included spyder2 firmware. + - Rewrite for use of upstream build system. + * debian/control: + - Set myself as maintainer. + - Update Build-Depends: + + Remove automake | automaken + - For previously not existing Vcs + + Create a new git repository on alioth. + + Add the fields Vcs-Browser and Vcs-Git. + - Change Priority from optional to extra. + - Remove useless packages: + + icc-utils + Now in argyll. Now only dummy package. + Change section to oldlibs + + libicc2 & libicc-dev + Useless. Only linked to argyll & icc-utils. + + libimdi0 & libimdi-dev + Useless. Only linked to argyll & icc-utils. + - Move documentation to new package argyll-doc + and symlink into the other packages. + - Add Pre-Depends: + * dpkg (>= 1.17.5) for use of the dpkg-maintscript-helper. + * debian/copyright: + - Rewrite into DEP-5 format. + - Add myself to the list of authors for debian/*. + - Add missing licenses and authors. + * debian/*.1 + - Move to debian/man/*.1. + * debian/man/* + - Rewrite the help2man generated man pages (Closes: #670857) + * debian/patches/ + - New 110_dispwin_segfault.patch to prevent segfault by + wrong parameter (Closes: #700253) + - Rewrite 03_usb-db.diff for new upstream release. + - Remove patches that included into new upstream release or useless: + + 01_autotools-support.diff + + 02_firmware-package-builder.diff + + 03_kfreebsd.diff + + 04_CVE-2012-4405.diff + + 05_external-yajl.diff + + 06_fix_udev_rule.patch + * New debian/*.(postinst|preinst|postrm): + - Remove existing doc directory and replace it with + a symlink to argyll-doc with dpkg-maintscript-helper dir_to_symlink. + * debian/argyll.preinst: + - Remove useless rm_conffile(). First version in Debian was 1.1.1-1, + rm_conffile was for version less equal 1.1.0-3. + + -- Jörg Frings-Fürst <debian@jff-webhosting.net> Wed, 17 Sep 2014 08:47:26 +0200 + +argyll (1.5.1-8) unstable; urgency=medium + + * QA upload. + * Add a symbols file for libicc2 and libimdi0. + + -- Iain Lane <laney@debian.org> Mon, 09 Jun 2014 12:52:11 +0100 + +argyll (1.5.1-7) unstable; urgency=medium + + * QA upload. + * debian/control: Bump udev recommended version to >= 196 + + -- Laurent Bigonville <bigon@debian.org> Sun, 04 May 2014 22:30:57 +0200 + +argyll (1.5.1-6) unstable; urgency=medium + + * QA upload. + * debian/patches/03_usb-db.diff: Use hwdb builtin, instead of the obsolete + usb-db in the udev rules. + * debian/patches/06_fix_udev_rule.patch: Fix udev rules to actually work; + ENV{ACL_MANAGE} has stopped working ages ago, and with logind it's now the + "uaccess" tag. Dropping also consolekit from Recommends. (Closes: #746974) + * debian/rules: Add libpam-systemd as a recommends to be sure we have a + session registered, this is needed for the permissions on the devices. + * debian/control: Build-depend on libtiff-dev rather than libtiff4-dev. + (Closes: #733126) + * debian/control: Drop Uploaders as the package has been orphaned + * debian/control: Bump Standards-Version to 3.9.5 (no further changes) + + -- Laurent Bigonville <bigon@debian.org> Sun, 04 May 2014 21:36:24 +0200 + +argyll (1.5.1-5) unstable; urgency=low + + * Package orphaned. I don't intent to support the work of an agressive + upstream author more longer and realy good luck for the next maintainer. + + -- Christian Marillat <marillat@debian.org> Mon, 19 Aug 2013 14:18:29 +0200 + +argyll (1.5.1-4) unstable; urgency=low + + * Revert previous yajl patch this break argyll. + * Regenerate all manpages. + * Add colord and gir1.2-colordgtk-1.0 in Suggests. + * Don't package .a and .la files. + + -- Christian Marillat <marillat@debian.org> Mon, 12 Aug 2013 15:51:54 +0200 + +argyll (1.5.1-3) unstable; urgency=low + + * Uptade patch 01_autotools-support with patch from bug report to link + argyll against external yajl also add an one line patch called + 05_external-yajl (Closes: #544223) + + -- Christian Marillat <marillat@debian.org> Fri, 02 Aug 2013 08:10:38 +0200 + +argyll (1.5.1-2) unstable; urgency=low + + * Package iccdump.1 and icclu.1 only in icc-utils package + (Closes: #717990, # 717993). + + -- Christian Marillat <marillat@debian.org> Sat, 27 Jul 2013 21:43:59 +0200 + +argyll (1.5.1-1) unstable; urgency=low + + * New upstream release. + * Removed 03_kfreebsd patch. + * Refresh 01_autotools-support patch (CLoses: 713545) + * New patch 03_usb-db to add support for newer udev (Closes: 717504) + + -- Christian Marillat <marillat@debian.org> Fri, 26 Jul 2013 16:25:19 +0200 + +argyll (1.4.0-8) unstable; urgency=low + + * Add a Breaks field and update the version in the Replaces field for the + icc-utils package (Closes: #694287) + + -- Christian Marillat <marillat@debian.org> Sun, 25 Nov 2012 09:59:35 +0100 + +argyll (1.4.0-7) unstable; urgency=high + + * New patch 04_CVE-2012-4405.diff to fix CVE-2012-4405 issue + (Closes: #687275) + + -- Christian Marillat <marillat@debian.org> Tue, 11 Sep 2012 13:45:12 +0200 + +argyll (1.4.0-6) unstable; urgency=low + + * Use dh_autoreconf (Closes: #678909) + + -- Christian Marillat <marillat@debian.org> Mon, 25 Jun 2012 07:52:56 +0200 + +argyll (1.4.0-5) unstable; urgency=low + + * Refresh 01_autotools-support patch (Closes: #678750). + + -- Christian Marillat <marillat@debian.org> Mon, 25 Jun 2012 00:01:31 +0200 + +argyll (1.4.0-4) unstable; urgency=low + + * Should Build-Depends on libusb-dev (Closes: #670329). + + -- Christian Marillat <marillat@debian.org> Wed, 25 Apr 2012 07:46:07 +0200 + +argyll (1.4.0-3) unstable; urgency=low + + * Fix kfreebsd build. Thanks to Robert Millan for the patch. + (Closes: #595951 #630208). + + -- Christian Marillat <marillat@debian.org> Tue, 24 Apr 2012 07:49:03 +0200 + +argyll (1.4.0-2) unstable; urgency=low + + * Move binaries from libicc2 package to a new icc-utils package (Closes: + #670003). + + -- Christian Marillat <marillat@debian.org> Sun, 22 Apr 2012 16:07:43 +0200 + +argyll (1.4.0-1) unstable; urgency=low + + * New upstream release. + + -- Christian Marillat <marillat@debian.org> Sat, 21 Apr 2012 15:53:50 +0200 + +argyll (1.3.7-1.1) unstable; urgency=low + + * Use DEB_LDFLAGS_MAINT_APPEND to add more LDFLAGS (Closes: #667924) + + -- Christian Marillat <marillat@debian.org> Mon, 09 Apr 2012 10:45:56 +0200 + +argyll (1.3.7-1) unstable; urgency=low + + * New upstream release. + * Try to fix the build (Thanks to Dmitry Nezhevenko) (Closes: #665055). + * Move to debhelper 9 for multi-arch and hardened flags. + + -- Christian Marillat <marillat@debian.org> Tue, 03 Apr 2012 08:46:37 +0200 + +argyll (1.3.6-3) unstable; urgency=low + + * Call dh_quilt_unpatch after MAKE distclean. + * Rework Makefile test to be sure we don't call upstream Makefile with + missing distclean target. + + -- Christian Marillat <marillat@debian.org> Tue, 20 Mar 2012 14:44:40 +0100 + +argyll (1.3.6-2) unstable; urgency=low + + * debian/rules Fix clean target. + + -- Christian Marillat <marillat@debian.org> Mon, 19 Mar 2012 16:50:40 +0100 + +argyll (1.3.6-1) unstable; urgency=low + + * New upstream release. + * Removed 03_add-ColorHug_sensor_driver patch, but beware the support for + ColorHug is experimental. + + -- Christian Marillat <marillat@debian.org> Mon, 19 Mar 2012 10:55:20 +0100 + +argyll (1.3.5-7) unstable; urgency=low + + * Really fix previous bug. + * Use debhelper 9. + + -- Christian Marillat <marillat@debian.org> Tue, 13 Mar 2012 08:41:01 +0100 + +argyll (1.3.5-6) unstable; urgency=low + + * Fix another bug in ColorHugColorHug (Closes: #661643) + + -- Christian Marillat <marillat@debian.org> Sun, 11 Mar 2012 16:59:06 +0100 + +argyll (1.3.5-5) unstable; urgency=low + + * Fix two bugs in ColorHugColorHug patch (Closes: #657582). + + -- Christian Marillat <marillat@debian.org> Sat, 28 Jan 2012 01:42:30 +0100 + +argyll (1.3.5-4) unstable; urgency=low + + * New patch 03_add-ColorHug_sensor_driver to add support for the ColorHug + sensor (Closes: #655888) + + -- Christian Marillat <marillat@debian.org> Tue, 17 Jan 2012 18:22:51 +0100 + +argyll (1.3.5-3) unstable; urgency=low + + * debian/rules Enable make distclean (Closes: #649728). + + -- Christian Marillat <marillat@debian.org> Wed, 23 Nov 2011 15:17:42 +0100 + +argyll (1.3.5-2) unstable; urgency=low + + * Don't package icclu and iccdump binaries in argyll, files already in + libicc2 package. + + -- Christian Marillat <marillat@debian.org> Mon, 21 Nov 2011 08:25:40 +0100 + +argyll (1.3.5-1) unstable; urgency=low + + [ Christian Marillat ] + * New maintainer (Closes: #622620) Thanks, Roland! + * Use dh-autoreconf. + + [ Dmitry Nezhevenko ] + * New upstream release (Closes: #647093). + * Switch to dpkg-source 3.0 (quilt) format. + * Merge debian changes from 1.3.0 (experimental) and 1.1.1 (unstable). + * Unsplit libicc2, built from the same source package again (since + upstream only ships it as part of Argyll anyway). Actually was already + done in experimental (Closes: #636801). + * Use kfreebsd-any instead of kfreebsd-(i386|amd64) to match kFreeBSD + (Closes: #634688). + * Provide dedicated libimdi0/libimdi-dev libraries (Closes: #611139). + * Add argyll-dbg package with debug symbols. + + -- Christian Marillat <marillat@debian.org> Sun, 13 Nov 2011 15:30:42 +0100 + +argyll (1.3.0-3) experimental; urgency=low + + * Minor future-proofing in debian/rules. + * Also removed redundant shipping of the firmware-package-builder + tarball, thanks to Pascal de Bruijn for noticing. + + -- Roland Mas <lolando@debian.org> Fri, 17 Sep 2010 11:05:22 +0200 + +argyll (1.3.0-2) experimental; urgency=low + + * Fixed packaging bugs introduced when un-splitting the source package. + + -- Roland Mas <lolando@debian.org> Tue, 14 Sep 2010 11:29:27 +0200 + +argyll (1.3.0-1) experimental; urgency=low + + * New upstream release. + + -- Roland Mas <lolando@debian.org> Wed, 08 Sep 2010 15:16:29 +0200 + +argyll (1.2.1-1) experimental; urgency=low + + * New upstream bugfix release. + * Please welcome Xavier Oswald as uploader. + + -- Roland Mas <lolando@debian.org> Sun, 05 Sep 2010 15:50:41 +0200 + +argyll (1.2.0-0) UNRELEASED; urgency=low + + * New upstream release. + * Unsplit libicc2, built from the same source package again (since + upstream only ships it as part of Argyll anyway). + * Bumped Standards-Version to 3.9.1 (no changes). + * argyll-firmware-spyder2: Moved firmware to /usr/share/color, which is + freedesktop.org-compliant and (more to the point) where Argyll 1.2.0 + looks for it. + + -- Roland Mas <lolando@debian.org> Thu, 05 Aug 2010 15:33:20 +0200 + +argyll (1.1.1-2) unstable; urgency=medium + + * QA upload. + * Add ../libargyll.la to LDADD (Closes: #615692). + * Don't ship .la files (Closes: #621142). + + -- Luk Claes <luk@debian.org> Sat, 11 Jun 2011 11:18:43 +0200 + +argyll (1.1.1-1) unstable; urgency=low + + * New upstream release. + * Switched dependency on policykit-1 to a more correct recommendation on + consolekit + recent udev. + * Updated copyright file (doc is now GFDL-1.3). + * Bumped Standards-Version to 3.8.4 (no changes required). + + -- Roland Mas <lolando@debian.org> Wed, 24 Feb 2010 21:26:55 +0100 + +argyll (1.1.0-5) unstable; urgency=low + + * Bumped version build-dependency on libicc-dev to prevent segmentation + fault. + + -- Roland Mas <lolando@debian.org> Mon, 25 Jan 2010 19:06:07 +0100 + +argyll (1.1.0-4) unstable; urgency=low + + * Adapted packaging to new udev rules, now compatible with PolicyKit-1 + (closes: #529411). This should fix device file permissions problems, + too (closes: #549406). And also the "deprecated udev function" + warning (closes: #564269). + * Removed conffiles no longer shipped by the package. + + -- Roland Mas <lolando@debian.org> Mon, 25 Jan 2010 13:47:59 +0100 + +argyll (1.1.0-3) unstable; urgency=low + + * Only depend on udev for Linux systems. + + -- Roland Mas <lolando@debian.org> Mon, 25 Jan 2010 11:42:54 +0100 + +argyll (1.1.0-2) unstable; urgency=low + + * Fix build on FreeBSD, patch from Petr Salinger + <Petr.Salinger@seznam.cz> (closes: #566768). + + -- Roland Mas <lolando@debian.org> Mon, 25 Jan 2010 10:29:33 +0100 + +argyll (1.1.0-1) unstable; urgency=low + + * New upstream release, including a patch obtained from upstream just + after the actual release. + * Also, stop using the system's libusb, which causes known problems with + Argyll. Now using Argyll's patched copy (privately, since the patches + cause problems with other software). + + -- Roland Mas <lolando@debian.org> Sun, 24 Jan 2010 23:34:18 +0100 + +argyll (1.1.0~rc4-1) unstable; urgency=low + + * New upstream pre-release. + * Ship all doc files with a wildcard rule, rather than a fixed (and + outdated) set. + + -- Roland Mas <lolando@debian.org> Wed, 06 Jan 2010 10:33:54 +0100 + +argyll (1.1.0~rc3-1) unstable; urgency=low + + * New upstream pre-release. + * Moved udev rules file to /lib/udev/rules.d. + + -- Roland Mas <lolando@debian.org> Tue, 05 Jan 2010 14:49:38 +0100 + +argyll (1.1.0~rc2-1) unstable; urgency=low + + * New upstream pre-release. + * Updated location of Bazaar branches in control file. + * The Debian-specific branch now feeds from the "midstream" branch + rather than the "upstream-releases" branch, to ease collaboration with + other distributions. This shouldn't make any difference on the + package contents. + + -- Roland Mas <lolando@debian.org> Thu, 10 Dec 2009 17:26:04 +0100 + +argyll (1.1.0~rc1+dfsg-1) unstable; urgency=low + + * Removed non-free IETF RFC/I-D from source package, thanks to Simon + Josefsson (closes: #555377). + + -- Roland Mas <lolando@debian.org> Sat, 14 Nov 2009 20:23:53 +0100 + +argyll (1.1.0~rc1-3) unstable; urgency=low + + * Added Build-Depends: libusbhid-dev for kFreeBSD architectures. + + -- Roland Mas <lolando@debian.org> Mon, 09 Nov 2009 13:34:54 +0100 + +argyll (1.1.0~rc1-2) unstable; urgency=low + + * Fixed build on GNU/kFreeBSD ports. + * Applied patch from upstream that fixes an infinite loop if Xrandr is + enabled. + + -- Roland Mas <lolando@debian.org> Mon, 09 Nov 2009 11:46:57 +0100 + +argyll (1.1.0~rc1-1) unstable; urgency=low + + * New upstream pre-release. + * Updated debian/copyright (upstream switched to Affero GPLv3). + * Bumped versioned build-dependency on debhelper. + * Bumped standards version to 3.8.3 (no changes needed). + + -- Roland Mas <lolando@debian.org> Sun, 08 Nov 2009 22:19:45 +0100 + +argyll (1.0.4-1) unstable; urgency=low + + * New upstream release. + + -- Roland Mas <lolando@debian.org> Fri, 03 Jul 2009 14:14:11 +0200 + +argyll (1.0.3+dfsg1-3) unstable; urgency=low + + * libicc is now a separate source+binary package, so argyll now links + against it. + * Since that new libicc is a proper new upstream snapshot, the problems + introduced with the local patches should be fixed (closes: #524478). + + -- Roland Mas <lolando@debian.org> Tue, 02 Jun 2009 11:26:01 +0200 + +argyll (1.0.3+dfsg1-2) unstable; urgency=low + + * Adapted debian/watch file to match version mangling. + * Updated autotools build system to dynamically link against the + internal libraries and provide a libicc.so for dynamic linking. + * Also ship the corresponding header files. + * Not splitting libicc into its own binary package just yet though, I + want to get more testing of the dynamic linking first. + + -- Roland Mas <lolando@debian.org> Thu, 14 May 2009 16:49:44 +0200 + +argyll (1.0.3+dfsg1-1) unstable; urgency=low + + * argyll-firmware-spyder2 is now generated as section non-free/graphics + rather than just graphics. + * Removed non-free RFC from source package (closes: #524972). + + -- Roland Mas <lolando@debian.org> Tue, 28 Apr 2009 11:47:38 +0200 + +argyll (1.0.3-5) unstable; urgency=low + + * Documented web interface for the Bazaar repository. + * Added source package for the Spyder2 firmware. + + -- Roland Mas <lolando@debian.org> Fri, 17 Apr 2009 23:34:40 +0200 + +argyll (1.0.3-4) unstable; urgency=low + + * Actually create /var/lib/argyll so spyd2en can store its firmware in + it... also remove it on purge. + * Also look for the Spyder2 firmware in /lib/firmware. + * Shortened debian/rules quite a bit thanks to Debhelper 7. + * Fixed build rules so testsuite passes. + * Bumped standards-version to 3.8.1 (no changes). + + -- Roland Mas <lolando@debian.org> Thu, 16 Apr 2009 11:25:26 +0200 + +argyll (1.0.3-3) unstable; urgency=low + + * Another patch for icclib, this time from Jan Lieskovsky, fixing some + more vulnerabilities described in CVE-2009-0792 (closes: #523472). + + -- Roland Mas <lolando@debian.org> Fri, 10 Apr 2009 17:53:55 +0200 + +argyll (1.0.3-2) unstable; urgency=low + + * Patched embedded copy of icclib to fix integer overflow and denial of + service vulnerabilities as described in CVE-2009-0583 and + CVE-2009-0584. Patch provided by Moritz Muehlenhoff and the Debian + security team (closes: #522448). + + -- Roland Mas <lolando@debian.org> Fri, 03 Apr 2009 22:43:14 +0200 + +argyll (1.0.3-1) unstable; urgency=low + + * New upstream release. + * Adopted package from Christian Marillat's Debian-Multimedia + repository (closes: #498396). Thanks, Christian! + * Stopped removing some files in clean target. + * Switched build-system to autotools. + * Link to system libusb rather than locally-shipped one. + * Fixed watch file. + * Moved Spyder2 firmware to /var/lib/argyll. + * Added detailed debian/copyright file. + * Use dh_prep instead of dh_clean -k. + * Rename /usr/bin/foo to /usr/bin/argyll-foo, for foo in + {average,refine,targen,verify}, to avoid having binaries with too + generic names. Documented in README.Debian. + + -- Roland Mas <lolando@debian.org> Thu, 19 Feb 2009 20:34:48 +0100 + +argyll (1.0.0-0.0) unstable; urgency=low + + * New upstream release. + * Added configuration files for udev, hal and policykit. + + -- Christian Marillat <marillat@debian.org> Fri, 18 Jul 2008 08:51:45 +0200 + +argyll (0.60-0.1) unstable; urgency=low + + * Need to Build-depends on libxinerama-dev instead of x11proto-xinerama-dev. + + -- Christian Marillat <marillat@debian.org> Fri, 21 Jul 2006 06:25:46 +0200 + +argyll (0.60-0.0) unstable; urgency=low + + * New upstream release. + + -- Christian Marillat <marillat@debian.org> Thu, 20 Jul 2006 10:56:43 +0200 + +argyll (0.53.1-0.2) unstable; urgency=low + + * Apply a patch from Guido to fix build under ppc. + + -- Christian Marillat <marillat@debian.org> Tue, 23 May 2006 14:40:45 +0200 + +argyll (0.53.1-0.1) unstable; urgency=low + + * Add libxxf86vm-dev and x11proto-xf86vidmode-dev in build-Depends. + + -- Christian Marillat <marillat@debian.org> Fri, 12 May 2006 16:27:46 +0200 + +argyll (0.53.1-0.0) unstable; urgency=low + + * New upstream release. + + -- Christian Marillat <marillat@debian.org> Thu, 9 Feb 2006 13:56:03 +0100 + +argyll (0.53-0.1) unstable; urgency=low + + * Rename icclink in icclink-argyll. + * Rename sprof in sprof-argyll. + + -- Christian Marillat <marillat@debian.org> Wed, 8 Feb 2006 11:42:15 +0100 + +argyll (0.53-0.0) unstable; urgency=low + + * Initial release. + + -- Christian Marillat <marillat@debian.org> Sun, 5 Feb 2006 22:08:11 +0100 diff --git a/debian/compat b/debian/compat new file mode 100644 index 0000000..ec63514 --- /dev/null +++ b/debian/compat @@ -0,0 +1 @@ +9 diff --git a/debian/control b/debian/control new file mode 100644 index 0000000..c4db378 --- /dev/null +++ b/debian/control @@ -0,0 +1,90 @@ +Source: argyll +Section: graphics +Priority: optional +Maintainer: Jörg Frings-Fürst <debian@jff-webhosting.net> +Standards-Version: 3.9.6 +Build-Depends: + debhelper (>= 9), + dh-autoreconf, + dpkg-dev (>= 1.17.0), + jam, + libjpeg-dev, + libpng12-dev, + libtiff5-dev, + libtool, + libusb-dev, + libx11-dev, + libxinerama-dev, + libxrandr-dev, + libxss-dev, + libxxf86vm-dev, + x11proto-scrnsaver-dev, + x11proto-xf86vidmode-dev, + zlib1g-dev +Homepage: http://www.argyllcms.com/ +Vcs-Git: git://anonscm.debian.org/collab-maint/argyll.git +Vcs-Browser: http://anonscm.debian.org/cgit/collab-maint/argyll.git + +Package: argyll +Architecture: linux-any +Depends: ${misc:Depends}, ${shlibs:Depends}, argyll-ref +Pre-Depends: + dpkg (>= 1.17.5) +Recommends: libpam-systemd [linux-any], udev (>= 196) [linux-any] +Suggests: argyll-doc, colord, gir1.2-colordgtk-1.0 +Description: Color Management System, calibrator and profiler + Argyll is an experimental, open source, ICC compatible color management + system. It supports accurate ICC profile creation for scanners, CMYK + printers, film recorders and calibration and profiling of displays. + Spectral sample data is supported, allowing a selection of illuminants + observer types, and paper fluorescent whitener additive compensation. + Profiles can also incorporate source specific gamut mappings for perceptual + and saturation intents. Gamut mapping and profile linking uses the CIECAM02 + appearance model, a unique gamut mapping algorithm, and a wide selection of + rendering intents. It also includes code for the fastest portable 8 bit + raster color conversion engine available anywhere, as well as support for + fast, fully accurate 16 bit conversion. Device color gamuts can also be + viewed and compared using a VRML viewer. + +Package: argyll-dbg +Section: debug +Priority: extra +Architecture: linux-any +Depends: argyll (= ${binary:Version}), ${misc:Depends} +Pre-Depends: + dpkg (>= 1.17.5) +Description: debugging symbols for argyll + Argyll is an experimental, open source, ICC compatible color management + system. It supports accurate ICC profile creation for scanners, CMYK + printers, film recorders and calibration and profiling of displays. + . + This package contains the debugging symbols for argyll, libicc and libimdi + libraries + +Package: argyll-ref +Architecture: all +Depends: ${misc:Depends} +Pre-Depends: + dpkg (>= 1.17.5) +Replaces: argyll (<< 1.6.3-1) +Breaks: argyll (<< 1.6.3-1) +Description: Color Management System, calibrator and profiler (data files) + Argyll is an experimental, open source, ICC compatible color management + system. It supports accurate ICC profile creation for scanners, CMYK + printers, film recorders and calibration and profiling of displays. + . + This package contains the data files for argyll. + +Package: argyll-doc +Architecture: all +Section: doc +Priority: extra +Depends: ${misc:Depends} +Pre-Depends: + dpkg (>= 1.17.5) +Description: Color Management System, calibrator and profiler (documentation) + Argyll is an experimental, open source, ICC compatible color management + system. It supports accurate ICC profile creation for scanners, CMYK + printers, film recorders and calibration and profiling of displays. + . + This package contains the documentation for argyll. diff --git a/debian/copyright b/debian/copyright new file mode 100644 index 0000000..ae16fbc --- /dev/null +++ b/debian/copyright @@ -0,0 +1,965 @@ +Format: http://www.debian.org/doc/packaging-manuals/copyright-format/1.0/ +Upstream-Name: ArgyllCMS +Upstream-Contact: Graeme W. Gill <Graeme@argyllcms.com> +Source: http://www.argyllcms.com/ + +Files: * +Copyright: 1995-2015 Graeme W. Gill <Graeme@argyllcms.com> +License: AGPL-3 + +Files: icc/* + cgats/* + jcnf/* + ucmm/* +Copyright: 1995-2014 Graeme W. Gill <Graeme@argyllcms.com> +License: Expat + +Files: ccast/cast_channel.proto +Copyright: 2013 The Chromium Authors +License: BSD-3 + +Files: ccast/chan/protobuf-c.* +Copyright: 2008-2014 Dave Benson and the protobuf-c authors +License: BSD-2 + +Files: ccast/axTLS/*.c + ccast/axTLS/*.h +Copyright: 2007 Cameron Rich +License: BSD-3 + +Files: ccast/axTLS/os_int.h +Copyright: 2014 Graeme W. Gill +License: Expat + +Files: icc/iccV42.h +Copyright: 1994-1998 SunSoft, Inc + 1994-2015 Graeme W. Gill <Graeme@argyllcms.com> +License: Expat + +Files: plot/x3dom.* +Copyright: 2009 Fraunhofer IGD, Darmstadt, Germany +License: MIT and GPL-3+ + +Files: yajl/* +Copyright: 2007-2014 Lloyd Hilaiel +License: BSD-3 + +Files: yajl/yajl_tree.* +Copyright: 2010-2011 Florian Forster <ff@octo.it> +License: BSD-3 + +Files: usb/* +Copyright: 2012-2015 Graeme W. Gill <Graeme@argyllcms.com> +License: Expat + +Files: usb/driver/* +Copyright: 2002-2005 Stephan Meyer <ste_meyer@web.de> +License: GPL-2 or LGPL-2 + The library (DLL) is distributed under the terms of the GNU Lesser + General Public License (LGPL). + . + All other components (drivers, services, installer) are distributed + under the terms of the GNU General Public License (GPL). + +Files: usb/driver/ioctl.c +Copyright: 2002-2005 Stephan Meyer <ste_meyer@web.de> + 2010 Travis Robinson <libusbdotnet@gmail.com> +License: GPL-2+ + +Files: usb/driver/transfer.c +Copyright: 2002-2005 Stephan Meyer <ste_meyer@web.de> + 2010 Travis Robinson <libusbdotnet@gmail.com> +License: GPL-3+ + +Files: xicc/iccjpeg.* +Copyright: 1998-2010 Marti Maria Saguer +License: Expat + +Files: spectro/* +Copyright: 1996-2015 Graeme W. Gill <Graeme@argyllcms.com> +License: GPL-2+ + +Files: spectro/dispcal.c + spectro/dispsup.c + spectro/dispsup.h + spectro/dispwin.c + spectro/dispwin.h + spectro/average.c + spectro/synthcal.c + spectro/synthread.c + spectro/ccxxmake.c + spectro/fakeread.c + spectro/License.txt + spectro/chartread.c + spectro/dispread.c + spectro/illumread.c +Copyright: 1996-2015 Graeme W. Gill <Graeme@argyllcms.com> +License: AGPL-3 + +Files: spectro/colorhug.* +Copyright: 2006-2015 Graeme W. Gill <Graeme@argyllcms.com> + 2011 Richard Hughes +License: GPL-2+ + +Files: spectro/mongoose.* +Copyright: 2004-2012 Sergey Lyubka +License: Expat + +Files: spectro/spec2cie.c +Copyright: 2005 Gerhard Fuernkranz + 2006-2015 Graeme W. Gill <Graeme@argyllcms.com> +License: GPL-2+ + +Files: h/sort.h +Copyright: 1996-2010 Graeme W. Gill <Graeme@argyllcms.com> +License: GPL-2+ + +Files: xicc/xspect.c +Copyright: 2000-2015 Graeme W. Gill <Graeme@argyllcms.com> +License: GPL-2+ + +Files: doc/* +Copyright: 1995-2015 Graeme W. Gill <Graeme@argyllcms.com> +License: GFDL-1.3+ + +Files: numlib/numsup.* +Copyright: 1997-2015 Graeme W. Gill <Graeme@argyllcms.com> +License: GPL-2+ + +Files: rspl/rspl1.* +Copyright: 1996-2010 Graeme W. Gill <Graeme@argyllcms.com> +License: GPL-2+ + +Files: xml/* +Copyright: 2003-2011 Michael R Sweet +License: LGPL-2+ + +Files: xml/install-sh +Copyright: 1991 Massachusetts Institute of Technology +License: MIT + +Files: ref/*.icm + icc/*.icm +Copyright: Public domain +License: public-domain + Public Domain. No Warranty, Use at own risk + +Files: debian/* +Copyright: 2006-2008 Christian Marillat <marillat@debian.org> + 2008-2010 Roland Mas <lolando@debian.org> + 2014-2015 Jörg Frings-Fürst <debian@jff-webhosting.net> +License: GPL-3+ + +License: AGPL-3 + GNU AFFERO GENERAL PUBLIC LICENSE + Version 3, 19 November 2007 + . + Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/> + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + . + Preamble + . + The GNU Affero General Public License is a free, copyleft license for + software and other kinds of works, specifically designed to ensure + cooperation with the community in the case of network server software. + . + The licenses for most software and other practical works are designed + to take away your freedom to share and change the works. By contrast, + our General Public Licenses are intended to guarantee your freedom to + share and change all versions of a program--to make sure it remains free + software for all its users. + . + When we speak of free software, we are referring to freedom, not + price. Our General Public Licenses are designed to make sure that you + have the freedom to distribute copies of free software (and charge for + them if you wish), that you receive source code or can get it if you + want it, that you can change the software or use pieces of it in new + free programs, and that you know you can do these things. + . + Developers that use our General Public Licenses protect your rights + with two steps: (1) assert copyright on the software, and (2) offer + you this License which gives you legal permission to copy, distribute + and/or modify the software. + . + A secondary benefit of defending all users' freedom is that + improvements made in alternate versions of the program, if they + receive widespread use, become available for other developers to + incorporate. Many developers of free software are heartened and + encouraged by the resulting cooperation. However, in the case of + software used on network servers, this result may fail to come about. + The GNU General Public License permits making a modified version and + letting the public access it on a server without ever releasing its + source code to the public. + . + The GNU Affero General Public License is designed specifically to + ensure that, in such cases, the modified source code becomes available + to the community. It requires the operator of a network server to + provide the source code of the modified version running there to the + users of that server. Therefore, public use of a modified version, on + a publicly accessible server, gives the public access to the source + code of the modified version. + . + An older license, called the Affero General Public License and + published by Affero, was designed to accomplish similar goals. This is + a different license, not a version of the Affero GPL, but Affero has + released a new version of the Affero GPL which permits relicensing under + this license. + . + The precise terms and conditions for copying, distribution and + modification follow. + . + TERMS AND CONDITIONS + . + 0. Definitions. + . + "This License" refers to version 3 of the GNU Affero General Public License. + . + "Copyright" also means copyright-like laws that apply to other kinds of + works, such as semiconductor masks. + . + "The Program" refers to any copyrightable work licensed under this + License. Each licensee is addressed as "you". "Licensees" and + "recipients" may be individuals or organizations. + . + To "modify" a work means to copy from or adapt all or part of the work + in a fashion requiring copyright permission, other than the making of an + exact copy. The resulting work is called a "modified version" of the + earlier work or a work "based on" the earlier work. + . + A "covered work" means either the unmodified Program or a work based + on the Program. + . + To "propagate" a work means to do anything with it that, without + permission, would make you directly or secondarily liable for + infringement under applicable copyright law, except executing it on a + computer or modifying a private copy. Propagation includes copying, + distribution (with or without modification), making available to the + public, and in some countries other activities as well. + . + To "convey" a work means any kind of propagation that enables other + parties to make or receive copies. Mere interaction with a user through + a computer network, with no transfer of a copy, is not conveying. + . + An interactive user interface displays "Appropriate Legal Notices" + to the extent that it includes a convenient and prominently visible + feature that (1) displays an appropriate copyright notice, and (2) + tells the user that there is no warranty for the work (except to the + extent that warranties are provided), that licensees may convey the + work under this License, and how to view a copy of this License. If + the interface presents a list of user commands or options, such as a + menu, a prominent item in the list meets this criterion. + . + 1. Source Code. + . + The "source code" for a work means the preferred form of the work + for making modifications to it. "Object code" means any non-source + form of a work. + . + A "Standard Interface" means an interface that either is an official + standard defined by a recognized standards body, or, in the case of + interfaces specified for a particular programming language, one that + is widely used among developers working in that language. + . + The "System Libraries" of an executable work include anything, other + than the work as a whole, that (a) is included in the normal form of + packaging a Major Component, but which is not part of that Major + Component, and (b) serves only to enable use of the work with that + Major Component, or to implement a Standard Interface for which an + implementation is available to the public in source code form. A + "Major Component", in this context, means a major essential component + (kernel, window system, and so on) of the specific operating system + (if any) on which the executable work runs, or a compiler used to + produce the work, or an object code interpreter used to run it. + . + The "Corresponding Source" for a work in object code form means all + the source code needed to generate, install, and (for an executable + work) run the object code and to modify the work, including scripts to + control those activities. However, it does not include the work's + System Libraries, or general-purpose tools or generally available free + programs which are used unmodified in performing those activities but + which are not part of the work. For example, Corresponding Source + includes interface definition files associated with source files for + the work, and the source code for shared libraries and dynamically + linked subprograms that the work is specifically designed to require, + such as by intimate data communication or control flow between those + subprograms and other parts of the work. + . + The Corresponding Source need not include anything that users + can regenerate automatically from other parts of the Corresponding + Source. + . + The Corresponding Source for a work in source code form is that + same work. + . + 2. Basic Permissions. + . + All rights granted under this License are granted for the term of + copyright on the Program, and are irrevocable provided the stated + conditions are met. This License explicitly affirms your unlimited + permission to run the unmodified Program. The output from running a + covered work is covered by this License only if the output, given its + content, constitutes a covered work. This License acknowledges your + rights of fair use or other equivalent, as provided by copyright law. + . + You may make, run and propagate covered works that you do not + convey, without conditions so long as your license otherwise remains + in force. You may convey covered works to others for the sole purpose + of having them make modifications exclusively for you, or provide you + with facilities for running those works, provided that you comply with + the terms of this License in conveying all material for which you do + not control copyright. Those thus making or running the covered works + for you must do so exclusively on your behalf, under your direction + and control, on terms that prohibit them from making any copies of + your copyrighted material outside their relationship with you. + . + Conveying under any other circumstances is permitted solely under + the conditions stated below. Sublicensing is not allowed; section 10 + makes it unnecessary. + . + 3. Protecting Users' Legal Rights From Anti-Circumvention Law. + . + No covered work shall be deemed part of an effective technological + measure under any applicable law fulfilling obligations under article + 11 of the WIPO copyright treaty adopted on 20 December 1996, or + similar laws prohibiting or restricting circumvention of such + measures. + . + When you convey a covered work, you waive any legal power to forbid + circumvention of technological measures to the extent such circumvention + is effected by exercising rights under this License with respect to + the covered work, and you disclaim any intention to limit operation or + modification of the work as a means of enforcing, against the work's + users, your or third parties' legal rights to forbid circumvention of + technological measures. + . + 4. Conveying Verbatim Copies. + . + You may convey verbatim copies of the Program's source code as you + receive it, in any medium, provided that you conspicuously and + appropriately publish on each copy an appropriate copyright notice; + keep intact all notices stating that this License and any + non-permissive terms added in accord with section 7 apply to the code; + keep intact all notices of the absence of any warranty; and give all + recipients a copy of this License along with the Program. + . + You may charge any price or no price for each copy that you convey, + and you may offer support or warranty protection for a fee. + . + 5. Conveying Modified Source Versions. + . + You may convey a work based on the Program, or the modifications to + produce it from the Program, in the form of source code under the + terms of section 4, provided that you also meet all of these conditions: + . + a) The work must carry prominent notices stating that you modified + it, and giving a relevant date. + . + b) The work must carry prominent notices stating that it is + released under this License and any conditions added under section + 7. This requirement modifies the requirement in section 4 to + "keep intact all notices". + . + c) You must license the entire work, as a whole, under this + License to anyone who comes into possession of a copy. This + License will therefore apply, along with any applicable section 7 + additional terms, to the whole of the work, and all its parts, + regardless of how they are packaged. This License gives no + permission to license the work in any other way, but it does not + invalidate such permission if you have separately received it. + . + d) If the work has interactive user interfaces, each must display + Appropriate Legal Notices; however, if the Program has interactive + interfaces that do not display Appropriate Legal Notices, your + work need not make them do so. + . + A compilation of a covered work with other separate and independent + works, which are not by their nature extensions of the covered work, + and which are not combined with it such as to form a larger program, + in or on a volume of a storage or distribution medium, is called an + "aggregate" if the compilation and its resulting copyright are not + used to limit the access or legal rights of the compilation's users + beyond what the individual works permit. Inclusion of a covered work + in an aggregate does not cause this License to apply to the other + parts of the aggregate. + . + 6. Conveying Non-Source Forms. + . + You may convey a covered work in object code form under the terms + of sections 4 and 5, provided that you also convey the + machine-readable Corresponding Source under the terms of this License, + in one of these ways: + . + a) Convey the object code in, or embodied in, a physical product + (including a physical distribution medium), accompanied by the + Corresponding Source fixed on a durable physical medium + customarily used for software interchange. + . + b) Convey the object code in, or embodied in, a physical product + (including a physical distribution medium), accompanied by a + written offer, valid for at least three years and valid for as + long as you offer spare parts or customer support for that product + model, to give anyone who possesses the object code either (1) a + copy of the Corresponding Source for all the software in the + product that is covered by this License, on a durable physical + medium customarily used for software interchange, for a price no + more than your reasonable cost of physically performing this + conveying of source, or (2) access to copy the + Corresponding Source from a network server at no charge. + . + c) Convey individual copies of the object code with a copy of the + written offer to provide the Corresponding Source. This + alternative is allowed only occasionally and noncommercially, and + only if you received the object code with such an offer, in accord + with subsection 6b. + . + d) Convey the object code by offering access from a designated + place (gratis or for a charge), and offer equivalent access to the + Corresponding Source in the same way through the same place at no + further charge. You need not require recipients to copy the + Corresponding Source along with the object code. If the place to + copy the object code is a network server, the Corresponding Source + may be on a different server (operated by you or a third party) + that supports equivalent copying facilities, provided you maintain + clear directions next to the object code saying where to find the + Corresponding Source. Regardless of what server hosts the + Corresponding Source, you remain obligated to ensure that it is + available for as long as needed to satisfy these requirements. + . + e) Convey the object code using peer-to-peer transmission, provided + you inform other peers where the object code and Corresponding + Source of the work are being offered to the general public at no + charge under subsection 6d. + . + A separable portion of the object code, whose source code is excluded + from the Corresponding Source as a System Library, need not be + included in conveying the object code work. + . + A "User Product" is either (1) a "consumer product", which means any + tangible personal property which is normally used for personal, family, + or household purposes, or (2) anything designed or sold for incorporation + into a dwelling. In determining whether a product is a consumer product, + doubtful cases shall be resolved in favor of coverage. For a particular + product received by a particular user, "normally used" refers to a + typical or common use of that class of product, regardless of the status + of the particular user or of the way in which the particular user + actually uses, or expects or is expected to use, the product. A product + is a consumer product regardless of whether the product has substantial + commercial, industrial or non-consumer uses, unless such uses represent + the only significant mode of use of the product. + . + "Installation Information" for a User Product means any methods, + procedures, authorization keys, or other information required to install + and execute modified versions of a covered work in that User Product from + a modified version of its Corresponding Source. The information must + suffice to ensure that the continued functioning of the modified object + code is in no case prevented or interfered with solely because + modification has been made. + . + If you convey an object code work under this section in, or with, or + specifically for use in, a User Product, and the conveying occurs as + part of a transaction in which the right of possession and use of the + User Product is transferred to the recipient in perpetuity or for a + fixed term (regardless of how the transaction is characterized), the + Corresponding Source conveyed under this section must be accompanied + by the Installation Information. But this requirement does not apply + if neither you nor any third party retains the ability to install + modified object code on the User Product (for example, the work has + been installed in ROM). + . + The requirement to provide Installation Information does not include a + requirement to continue to provide support service, warranty, or updates + for a work that has been modified or installed by the recipient, or for + the User Product in which it has been modified or installed. Access to a + network may be denied when the modification itself materially and + adversely affects the operation of the network or violates the rules and + protocols for communication across the network. + . + Corresponding Source conveyed, and Installation Information provided, + in accord with this section must be in a format that is publicly + documented (and with an implementation available to the public in + source code form), and must require no special password or key for + unpacking, reading or copying. + . + 7. Additional Terms. + . + "Additional permissions" are terms that supplement the terms of this + License by making exceptions from one or more of its conditions. + Additional permissions that are applicable to the entire Program shall + be treated as though they were included in this License, to the extent + that they are valid under applicable law. If additional permissions + apply only to part of the Program, that part may be used separately + under those permissions, but the entire Program remains governed by + this License without regard to the additional permissions. + . + When you convey a copy of a covered work, you may at your option + remove any additional permissions from that copy, or from any part of + it. (Additional permissions may be written to require their own + removal in certain cases when you modify the work.) You may place + additional permissions on material, added by you to a covered work, + for which you have or can give appropriate copyright permission. + . + Notwithstanding any other provision of this License, for material you + add to a covered work, you may (if authorized by the copyright holders of + that material) supplement the terms of this License with terms: + . + a) Disclaiming warranty or limiting liability differently from the + terms of sections 15 and 16 of this License; or + . + b) Requiring preservation of specified reasonable legal notices or + author attributions in that material or in the Appropriate Legal + Notices displayed by works containing it; or + . + c) Prohibiting misrepresentation of the origin of that material, or + requiring that modified versions of such material be marked in + reasonable ways as different from the original version; or + . + d) Limiting the use for publicity purposes of names of licensors or + authors of the material; or + . + e) Declining to grant rights under trademark law for use of some + trade names, trademarks, or service marks; or + . + f) Requiring indemnification of licensors and authors of that + material by anyone who conveys the material (or modified versions of + it) with contractual assumptions of liability to the recipient, for + any liability that these contractual assumptions directly impose on + those licensors and authors. + . + All other non-permissive additional terms are considered "further + restrictions" within the meaning of section 10. If the Program as you + received it, or any part of it, contains a notice stating that it is + governed by this License along with a term that is a further + restriction, you may remove that term. If a license document contains + a further restriction but permits relicensing or conveying under this + License, you may add to a covered work material governed by the terms + of that license document, provided that the further restriction does + not survive such relicensing or conveying. + . + If you add terms to a covered work in accord with this section, you + must place, in the relevant source files, a statement of the + additional terms that apply to those files, or a notice indicating + where to find the applicable terms. + . + Additional terms, permissive or non-permissive, may be stated in the + form of a separately written license, or stated as exceptions; + the above requirements apply either way. + . + 8. Termination. + . + You may not propagate or modify a covered work except as expressly + provided under this License. Any attempt otherwise to propagate or + modify it is void, and will automatically terminate your rights under + this License (including any patent licenses granted under the third + paragraph of section 11). + . + However, if you cease all violation of this License, then your + license from a particular copyright holder is reinstated (a) + provisionally, unless and until the copyright holder explicitly and + finally terminates your license, and (b) permanently, if the copyright + holder fails to notify you of the violation by some reasonable means + prior to 60 days after the cessation. + . + Moreover, your license from a particular copyright holder is + reinstated permanently if the copyright holder notifies you of the + violation by some reasonable means, this is the first time you have + received notice of violation of this License (for any work) from that + copyright holder, and you cure the violation prior to 30 days after + your receipt of the notice. + . + Termination of your rights under this section does not terminate the + licenses of parties who have received copies or rights from you under + this License. If your rights have been terminated and not permanently + reinstated, you do not qualify to receive new licenses for the same + material under section 10. + . + 9. Acceptance Not Required for Having Copies. + . + You are not required to accept this License in order to receive or + run a copy of the Program. Ancillary propagation of a covered work + occurring solely as a consequence of using peer-to-peer transmission + to receive a copy likewise does not require acceptance. However, + nothing other than this License grants you permission to propagate or + modify any covered work. These actions infringe copyright if you do + not accept this License. Therefore, by modifying or propagating a + covered work, you indicate your acceptance of this License to do so. + . + 10. Automatic Licensing of Downstream Recipients. + . + Each time you convey a covered work, the recipient automatically + receives a license from the original licensors, to run, modify and + propagate that work, subject to this License. You are not responsible + for enforcing compliance by third parties with this License. + . + An "entity transaction" is a transaction transferring control of an + organization, or substantially all assets of one, or subdividing an + organization, or merging organizations. If propagation of a covered + work results from an entity transaction, each party to that + transaction who receives a copy of the work also receives whatever + licenses to the work the party's predecessor in interest had or could + give under the previous paragraph, plus a right to possession of the + Corresponding Source of the work from the predecessor in interest, if + the predecessor has it or can get it with reasonable efforts. + . + You may not impose any further restrictions on the exercise of the + rights granted or affirmed under this License. For example, you may + not impose a license fee, royalty, or other charge for exercise of + rights granted under this License, and you may not initiate litigation + (including a cross-claim or counterclaim in a lawsuit) alleging that + any patent claim is infringed by making, using, selling, offering for + sale, or importing the Program or any portion of it. + . + 11. Patents. + . + A "contributor" is a copyright holder who authorizes use under this + License of the Program or a work on which the Program is based. The + work thus licensed is called the contributor's "contributor version". + . + A contributor's "essential patent claims" are all patent claims + owned or controlled by the contributor, whether already acquired or + hereafter acquired, that would be infringed by some manner, permitted + by this License, of making, using, or selling its contributor version, + but do not include claims that would be infringed only as a + consequence of further modification of the contributor version. For + purposes of this definition, "control" includes the right to grant + patent sublicenses in a manner consistent with the requirements of + this License. + . + Each contributor grants you a non-exclusive, worldwide, royalty-free + patent license under the contributor's essential patent claims, to + make, use, sell, offer for sale, import and otherwise run, modify and + propagate the contents of its contributor version. + . + In the following three paragraphs, a "patent license" is any express + agreement or commitment, however denominated, not to enforce a patent + (such as an express permission to practice a patent or covenant not to + sue for patent infringement). To "grant" such a patent license to a + party means to make such an agreement or commitment not to enforce a + patent against the party. + . + If you convey a covered work, knowingly relying on a patent license, + and the Corresponding Source of the work is not available for anyone + to copy, free of charge and under the terms of this License, through a + publicly available network server or other readily accessible means, + then you must either (1) cause the Corresponding Source to be so + available, or (2) arrange to deprive yourself of the benefit of the + patent license for this particular work, or (3) arrange, in a manner + consistent with the requirements of this License, to extend the patent + license to downstream recipients. "Knowingly relying" means you have + actual knowledge that, but for the patent license, your conveying the + covered work in a country, or your recipient's use of the covered work + in a country, would infringe one or more identifiable patents in that + country that you have reason to believe are valid. + . + If, pursuant to or in connection with a single transaction or + arrangement, you convey, or propagate by procuring conveyance of, a + covered work, and grant a patent license to some of the parties + receiving the covered work authorizing them to use, propagate, modify + or convey a specific copy of the covered work, then the patent license + you grant is automatically extended to all recipients of the covered + work and works based on it. + . + A patent license is "discriminatory" if it does not include within + the scope of its coverage, prohibits the exercise of, or is + conditioned on the non-exercise of one or more of the rights that are + specifically granted under this License. You may not convey a covered + work if you are a party to an arrangement with a third party that is + in the business of distributing software, under which you make payment + to the third party based on the extent of your activity of conveying + the work, and under which the third party grants, to any of the + parties who would receive the covered work from you, a discriminatory + patent license (a) in connection with copies of the covered work + conveyed by you (or copies made from those copies), or (b) primarily + for and in connection with specific products or compilations that + contain the covered work, unless you entered into that arrangement, + or that patent license was granted, prior to 28 March 2007. + . + Nothing in this License shall be construed as excluding or limiting + any implied license or other defenses to infringement that may + otherwise be available to you under applicable patent law. + . + 12. No Surrender of Others' Freedom. + . + If conditions are imposed on you (whether by court order, agreement or + otherwise) that contradict the conditions of this License, they do not + excuse you from the conditions of this License. If you cannot convey a + covered work so as to satisfy simultaneously your obligations under this + License and any other pertinent obligations, then as a consequence you may + not convey it at all. For example, if you agree to terms that obligate you + to collect a royalty for further conveying from those to whom you convey + the Program, the only way you could satisfy both those terms and this + License would be to refrain entirely from conveying the Program. + . + 13. Remote Network Interaction; Use with the GNU General Public License. + . + Notwithstanding any other provision of this License, if you modify the + Program, your modified version must prominently offer all users + interacting with it remotely through a computer network (if your version + supports such interaction) an opportunity to receive the Corresponding + Source of your version by providing access to the Corresponding Source + from a network server at no charge, through some standard or customary + means of facilitating copying of software. This Corresponding Source + shall include the Corresponding Source for any work covered by version 3 + of the GNU General Public License that is incorporated pursuant to the + following paragraph. + . + Notwithstanding any other provision of this License, you have + permission to link or combine any covered work with a work licensed + under version 3 of the GNU General Public License into a single + combined work, and to convey the resulting work. The terms of this + License will continue to apply to the part which is the covered work, + but the work with which it is combined will remain governed by version + 3 of the GNU General Public License. + . + 14. Revised Versions of this License. + . + The Free Software Foundation may publish revised and/or new versions of + the GNU Affero General Public License from time to time. Such new versions + will be similar in spirit to the present version, but may differ in detail to + address new problems or concerns. + . + Each version is given a distinguishing version number. If the + Program specifies that a certain numbered version of the GNU Affero General + Public License "or any later version" applies to it, you have the + option of following the terms and conditions either of that numbered + version or of any later version published by the Free Software + Foundation. If the Program does not specify a version number of the + GNU Affero General Public License, you may choose any version ever published + by the Free Software Foundation. + . + If the Program specifies that a proxy can decide which future + versions of the GNU Affero General Public License can be used, that proxy's + public statement of acceptance of a version permanently authorizes you + to choose that version for the Program. + . + Later license versions may give you additional or different + permissions. However, no additional obligations are imposed on any + author or copyright holder as a result of your choosing to follow a + later version. + . + 15. Disclaimer of Warranty. + . + THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY + APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT + HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY + OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, + THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM + IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF + ALL NECESSARY SERVICING, REPAIR OR CORRECTION. + . + 16. Limitation of Liability. + . + IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING + WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS + THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY + GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE + USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF + DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD + PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), + EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF + SUCH DAMAGES. + . + 17. Interpretation of Sections 15 and 16. + . + If the disclaimer of warranty and limitation of liability provided + above cannot be given local legal effect according to their terms, + reviewing courts shall apply local law that most closely approximates + an absolute waiver of all civil liability in connection with the + Program, unless a warranty or assumption of liability accompanies a + copy of the Program in return for a fee. + . + END OF TERMS AND CONDITIONS + . + How to Apply These Terms to Your New Programs + . + If you develop a new program, and you want it to be of the greatest + possible use to the public, the best way to achieve this is to make it + free software which everyone can redistribute and change under these terms. + . + To do so, attach the following notices to the program. It is safest + to attach them to the start of each source file to most effectively + state the exclusion of warranty; and each file should have at least + the "copyright" line and a pointer to where the full notice is found. + . + <one line to give the program's name and a brief idea of what it does.> + Copyright (C) <year> <name of author> + . + This program is free software: you can redistribute it and/or modify + it under the terms of the GNU Affero General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + . + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU Affero General Public License for more details. + . + You should have received a copy of the GNU Affero General Public License + along with this program. If not, see <http://www.gnu.org/licenses/>. + . + Also add information on how to contact you by electronic and paper mail. + . + If your software can interact with users remotely through a computer + network, you should also make sure that it provides a way for users to + get its source. For example, if your program is a web application, its + interface could display a "Source" link that leads users to an archive + of the code. There are many ways you could offer source, and different + solutions will be better for different programs; see section 13 for the + specific requirements. + . + You should also get your employer (if you work as a programmer) or school, + if any, to sign a "copyright disclaimer" for the program, if necessary. + For more information on this, and how to apply and follow the GNU AGPL, see + <http://www.gnu.org/licenses/>. + +License: BSD-2 + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are + met: + . + * Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + . + * Redistributions in binary form must reproduce the above + copyright notice, this list of conditions and the following disclaimer + in the documentation and/or other materials provided with the + distribution. + . + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +License: BSD-3 + All rights reserved. + . + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + . + 1. Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + . + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + . + 3. Neither the name of the copyright holder nor the names of its contributors + may be used to endorse or promote products derived from this software + without specific prior written permission. + . + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + +License: Expat + Permission is hereby granted, free of charge, to any person obtaining a + copy of this software and associated documentation files (the "Software"), + to deal in the Software without restriction, including without limitation + the rights to use, copy, modify, merge, publish, distribute, sublicense, + and/or sell copies of the Software, and to permit persons to whom the + Software is furnished to do so, subject to the following conditions: + . + The above copyright notice and this permission notice shall be included + in all copies or substantial portions of the Software. + +License: GFDL-1.3+ + Permission is granted to copy, distribute and/or modify this document + under the terms of the GNU Free Documentation License, Version 1.3 + or any later version published by the Free Software Foundation; + with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. + . + On Debian systems, the complete text of the GNU Free Documentation License + version 1.3 can be found in "/usr/share/common-licenses/GFDL-1.3". + +License: GPL-2+ + This program is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 2 of the License, or + (at your option) any later version. + . + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + . + You should have received a copy of the GNU General Public License + along with this program. If not, see <http://www.gnu.org/licenses/>. + . + The complete text of the GNU General Public License + can be found in /usr/share/common-licenses/GPL-2 file. + +License: GPL-3+ + This package is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + . + This package is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + . + You should have received a copy of the GNU General Public License + along with this program. If not, see <http://www.gnu.org/licenses/> + . + On Debian systems, the complete text of the GNU General + Public License version 3 can be found in "/usr/share/common-licenses/GPL-3". + +License: LGPL-2+ + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Library General Public + License as published by the Free Software Foundation; either + version 2 of the License, or (at your option) any later version. + . + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + . + You should have received a copy of the GNU Library General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + . + On Debian systems, the complete text of the GNU Library General Public License + version 2 can be found in "/usr/share/common-licenses/LGPL-2". + +License: MIT + All rights reserved. No part of this source code may be reproduced, + stored in a retrieval system, or transmitted, in any form or by any + means, electronic, mechanical, photocopying, recording or otherwise, + except as stated in the end-user licence agreement, without the prior + permission of the copyright owners. + . + Permission to use, copy, modify, and distribute this software and its + documentation for any purpose and without fee is hereby granted, provided + that the above copyright notice appear in all copies and that both that + copyright notice and this permission notice appear in supporting + documentation, and that the name of OSF, UI or X/Open not be used in + advertising or publicity pertaining to distribution of the software + without specific, written prior permission. OSF, UI and X/Open make + no representations about the suitability of this software for any purpose. + It is provided "as is" without express or implied warranty. + . + OSF, UI and X/Open DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, + INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO + EVENT SHALL OSF, UI or X/Open BE LIABLE FOR ANY SPECIAL, INDIRECT OR + CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF + USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR + OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR + PERFORMANCE OF THIS SOFTWARE. diff --git a/debian/icc-utils.postinst b/debian/icc-utils.postinst new file mode 100644 index 0000000..42dfee1 --- /dev/null +++ b/debian/icc-utils.postinst @@ -0,0 +1,41 @@ +#!/bin/sh +# +# see: dh_installdeb(1) + +set -e + +# summary of how this script can be called: +# * <postinst> `configure' <most-recently-configured-version> +# * <old-postinst> `abort-upgrade' <new version> +# * <conflictor's-postinst> `abort-remove' `in-favour' <package> +# <new-version> +# * <postinst> `abort-remove' +# * <deconfigured's-postinst> `abort-deconfigure' `in-favour' +# <failed-install-package> <version> `removing' +# <conflicting-package> <version> +# for details, see http://www.debian.org/doc/debian-policy/ or +# the debian-policy package + +# source debconf library +#. /usr/share/debconf/confmodule + + +case "$1" in + + configure|abort-upgrade|abort-remove|abort-deconfigure) + # Replace documentation directory symlink + dpkg-maintscript-helper symlink_to_dir /usr/share/doc/icc-utils /usr/share/doc/argyll-doc 1.6.3-2~ -- "$@" + + ;; + + *) + echo "postinst called with unknown argument \`$1'" >&2 + exit 1 + ;; + +esac + +#DEBHELPER# + + +exit 0 diff --git a/debian/icc-utils.postrm b/debian/icc-utils.postrm new file mode 100644 index 0000000..eb12775 --- /dev/null +++ b/debian/icc-utils.postrm @@ -0,0 +1,33 @@ +#! /bin/sh +# postrm script for icc-utils +# +# see: dh_installdeb(1) + +set -e + +# summary of how this script can be called: +# * <postrm> `remove' +# * <postrm> `purge' +# * <old-postrm> `upgrade' <new-version> +# * <new-postrm> `failed-upgrade' <old-version> +# * <new-postrm> `abort-install' +# * <new-postrm> `abort-install' <old-version> +# * <new-postrm> `abort-upgrade' <old-version> +# * <disappearer's-postrm> `disappear' <r>overwrit>r> <new-version> +# for details, see /usr/share/doc/packaging-manual/ + +case "$1" in + purge|remove|upgrade|failed-upgrade|abort-install|abort-upgrade|disappear) + dpkg-maintscript-helper symlink_to_dir /usr/share/doc/icc-utils /usr/share/doc/argyll-doc 1.6.3-2~ -- "$@" + ;; + + *) + echo "postrm called with unknown argument \`$1'" >&2 + exit 0 + +esac + +# dh_installdeb will replace this with shell code automatically +# generated by other debhelper scripts. + +#DEBHELPER# diff --git a/debian/icc-utils.preinst b/debian/icc-utils.preinst new file mode 100644 index 0000000..98e4723 --- /dev/null +++ b/debian/icc-utils.preinst @@ -0,0 +1,32 @@ +#!/bin/sh +# preinst script for icc-utils +# +# see: dh_installdeb(1) + +set -e + +# summary of how this script can be called: +# * <new-preinst> `install' +# * <new-preinst> `install' <old-version> +# * <new-preinst> `upgrade' <old-version> +# * <old-preinst> `abort-upgrade' <new-version> +# for details, see http://www.debian.org/doc/debian-policy/ or +# the debian-policy package + + +case "$1" in + install|upgrade|abort-upgrade) + dpkg-maintscript-helper symlink_to_dir /usr/share/doc/icc-utils /usr/share/doc/argyll-doc 1.6.3-2~ -- "$@" + ;; + *) + echo "preinst called with unknown argument \`$1'" >&2 + exit 1 + ;; +esac + +# dh_installdeb will replace this with shell code automatically +# generated by other debhelper scripts. + +#DEBHELPER# + +exit 0 diff --git a/debian/man/applycal.1 b/debian/man/applycal.1 new file mode 100644 index 0000000..eb2f902 --- /dev/null +++ b/debian/man/applycal.1 @@ -0,0 +1,30 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH APPLY "1" "September 2014" "applycal" "User Commands" +.SH NAME +Apply \- Apply device calibration to an ICC profile. +.SH DESCRIPTION +Apply device calibration to an ICC profile +.SH SYNOPSIS +.B applycal +.RB [\-options] [calfile.cal] inprof.icc [outprof.icc] +.TP +\fB\-v\fR +Verbose mode +.TP +\fB\-a\fR +Apply or re\-apply calibration (default) +.TP +\fB\-u\fR +Remove calibration +.TP +\fB\-c\fR +Check calibration +.TP +calfile.cal +Calibration file to apply +.TP +inprof.icc +ICC profile to read +.TP +outprof.icc +modified ICC profile to write
\ No newline at end of file diff --git a/debian/man/average.1 b/debian/man/average.1 new file mode 100644 index 0000000..ae80f1f --- /dev/null +++ b/debian/man/average.1 @@ -0,0 +1,29 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH AVERAGE "1" "September 2014" "average" "User Commands" +.SH NAME +Average \- Average or merge values in .ti3 like files. +.SH DESCRIPTION +Average or merge values in .ti3 like files +.IP +Diagnostic: Too few arguments (1, minimum is 2) +.SH SYNOPSIS +.B average +.RB [\-options]\ \input1.ti3\ \input2.ti3 ... output.ti3 +.TP +\fB\-v\fR +Verbose +.TP +\fB\-m\fR +Merge rather than average +.TP +input1.ti3 +First input file +.TP +input2.ti3 +Second input file +.TP +\&... +etc. +.TP +output.ti3 +Resulting averaged or merged output file diff --git a/debian/man/cb2ti3.1 b/debian/man/cb2ti3.1 new file mode 100644 index 0000000..ddf3a9d --- /dev/null +++ b/debian/man/cb2ti3.1 @@ -0,0 +1,21 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH CONVERT "1" "September 2014" "cb2ti3" "User Commands" +.SH NAME +Convert \- Convert Colorblind raw device profile data to Argyll data. +.SH DESCRIPTION +Convert Colorblind raw device profile data to Argyll data +.SH SYNOPSIS +.B cb2ti3 +.RB [\-v] [\-l limit] infile outfile +.TP +\fB\-v\fR +Verbose mode +.TP +\fB\-l\fR limit +Set inklimit in .ti3 file +.TP +infile +Base name for input.CMY and input.nCIE file +.TP +outfile +Base name for output.ti3 file
\ No newline at end of file diff --git a/debian/man/cctiff.1 b/debian/man/cctiff.1 new file mode 100644 index 0000000..cb23e31 --- /dev/null +++ b/debian/man/cctiff.1 @@ -0,0 +1,73 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH COLOR "1" "September 2014" "cctiff" "User Commands" +.SH NAME +Color \- Color Correct a TIFF file using any sequence of ICC profiles or Calibrations. +.SH DESCRIPTION +Color Correct a TIFF or JPEG file using any sequence of ICC profiles or Calibrations +.SH SYNOPSIS +.B cctiff +.RB [\-options]\ { [\-i intent]\ profile.icc\ |\ calbrtn.cal\ ...}\ infile.(tif|jpg)\ outfile.(tif|jpg) +.TP +\fB\-v\fR +Verbose. +.TP +\fB\-c\fR +Combine linearisation curves into one transform. +.TP +\fB\-p\fR +Use slow precise correction. +.TP +\fB\-k\fR +Check fast result against precise, and report. +.TP +\fB\-r\fR n +Override the default CLUT resolution +.TP +\fB\-t\fR n +Choose output encoding from 1..n +.TP +\fB\-f\fR [T|J] +Set output format to Tiff or Jpeg (Default is same as input) +.TP +\fB\-q\fR quality +Set JPEG quality 1..100 (Default 80) +.TP +\fB\-a\fR +Read and Write planes > 4 as alpha planes +.TP +\fB\-I\fR +Ignore any file or profile colorspace mismatches +.TP +\fB\-D\fR +Don't append or set the output TIFF or JPEG description +.TP +\fB\-e\fR profile.[icc | tiff | jpg] +Optionally embed a profile in the destination TIFF or JPEG file. +.IP +Then for each profile in sequence: +.TP +\fB\-i\fR intent +p = perceptual, r = relative colorimetric, +s = saturation, a = absolute colorimetric +.TP +\fB\-o\fR order +n = normal (priority: lut > matrix > monochrome) +r = reverse (priority: monochrome > matrix > lut) +.TP +profile.[icc | tiff] +Device, Link or Abstract profile +.IP +( May be embedded profile in TIFF/JPEG file) +.IP +or each calibration file in sequence: +.TP +\fB\-d\fR dir +f = forward cal. (default), b = backwards cal. +.TP +calbrtn.cal +Device calibration file. +.TP +infile.tif/jpg +Input TIFF/JPEG file in appropriate color space +.IP +outfile.tif/jpg Output TIFF/JPEG file diff --git a/debian/man/ccxxmake.1 b/debian/man/ccxxmake.1 new file mode 100644 index 0000000..337db92 --- /dev/null +++ b/debian/man/ccxxmake.1 @@ -0,0 +1,91 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH CREATE "1" "September 2014" "ccmxmake" "User Commands" +.SH NAME +Create \- Create CCMX or CCSS. +.SH DESCRIPTION +Create CCMX or CCSS +.SH SYNOPSIS +.B ccmxmake +.RB [\-options]\ output.ccmx +.TP +\fB\-v\fR +Verbose mode +.TP +\fB\-S\fR +Create CCSS rather than CCMX +.HP +\fB\-f\fR file1.ti3[,file2.ti3] Create from one or two .ti3 files rather than measure. +.TP +\fB\-display\fR displayname +Choose X11 display name +.TP +\fB\-d\fR n[,m] +Choose the display n from the following list (default 1) +Optionally choose different display m for VideoLUT access +.IP +1 name = ':0.0' +1 = 'Screen 1, Output DVI\-I\-1 at 0, 0, width 1920, height 1080' +.TP +\fB\-dweb[\fR:port] +Display via a web server at port (default 8080) +.TP +\fB\-p\fR +Use telephoto mode (ie. for a projector) (if available) +.TP +\fB\-P\fR ho,vo,ss[,vs] +Position test window and scale it +ho,vi: 0.0 = left/top, 0.5 = center, 1.0 = right/bottom etc. +ss: 0.5 = half, 1.0 = normal, 2.0 = double etc. +.TP +\fB\-F\fR +Fill whole screen with black background +.TP +\fB\-n\fR +Don't set override redirect on test window +.TP +\fB\-N\fR +Disable initial calibration of instrument if possible +.TP +\fB\-H\fR +Use high resolution spectrum mode (if available) +.TP +\fB\-C\fR "command" +Invoke shell "command" each time a color is set +.TP +\fB\-o\fR observ +Choose CIE Observer for CCMX spectrometer data: +1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2 +.TP +\fB\-s\fR steps +Override default patch sequence combination steps (default 1) +.TP +\fB\-W\fR n|h|x +Override serial port flow control: n = none, h = HW, x = Xon/Xoff +.TP +\fB\-D\fR [level] +Print debug diagnostics to stderr +.TP +\fB\-E\fR desciption +Override the default overall description +.TP +\fB\-I\fR displayname +Set display make and model description +.TP +\fB\-T\fR displaytech +Set display technology description (ie. CRT, LCD etc.) +.TP +\fB\-U\fR c +Set UI selection character(s) +.TP +\fB\-Y\fR r|n +Set or override refresh/non\-refresh display type +.TP +\fB\-Y\fR R:rate +Override measured refresh rate with rate Hz +.TP +\fB\-Y\fR A +Use non\-adaptive integration time mode (if available). +.IP +correction.ccmx | calibration.ccss +.IP +File to save result to diff --git a/debian/man/chartread.1 b/debian/man/chartread.1 new file mode 100644 index 0000000..1d8285e --- /dev/null +++ b/debian/man/chartread.1 @@ -0,0 +1,96 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH READ "1" "September 2014" "chartread" "User Commands" +.SH NAME +Read \- Read Target Test Chart. +.SH DESCRIPTION +Read Target Test Chart +.SH SYNOPSIS +.B chartread +.RB [\-options]\ outfile +.TP +\fB\-v\fR +Verbose mode +.TP +\fB\-c\fR listno +Set communication port from the following list (default 1) +.IP +** No ports found ** +.TP +\fB\-t\fR +Use transmission measurement mode +.TP +\fB\-d\fR +Use display measurement mode (white Y relative results) +.TP +\fB\-e\fR +Emissive for transparency on a light box +.TP +\fB\-p\fR +Measure patch by patch rather than strip +.TP +\fB\-x\fR [lx] +Take external values, either L*a*b* (\fB\-xl\fR) or XYZ (\fB\-xx\fR). +.TP +\fB\-n\fR +Don't save spectral information (default saves spectral) +.TP +\fB\-l\fR +Save CIE as D50 L*a*b* rather than XYZ +.TP +\fB\-L\fR +Save CIE as D50 L*a*b* as well as XYZ +.TP +\fB\-r\fR +Resume reading partly read chart +.TP +\fB\-I\fR file.cal +Override calibration info from .ti2 in resulting .ti3 +.TP +\fB\-F\fR filter +Set filter configuration (if aplicable): +.TP +n +None +.TP +p +Polarising filter +.TP +6 +D65 +.TP +u +U.V. Cut +.TP +\fB\-N\fR +Disable initial calibration of instrument if possible +.TP +\fB\-B\fR +Disable auto bi\-directional strip recognition +.TP +\fB\-H\fR +Use high resolution spectrum mode (if available) +.TP +\fB\-X\fR file.ccmx +Apply Colorimeter Correction Matrix +.TP +\fB\-X\fR file.ccss +Use Colorimeter Calibration Spectral Samples for calibration +.TP +\fB\-Q\fR observ +Choose CIE Observer for CCSS instrument: +1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2 +.TP +\fB\-T\fR ratio +Modify strip patch consistency tolerance by ratio +.TP +\fB\-S\fR +Suppress wrong strip & unexpected value warnings +.TP +\fB\-W\fR n|h|x +Override serial port flow control: n = none, h = HW, x = Xon/Xoff +.TP +\fB\-D\fR [level] +Print debug diagnostics to stderr +.TP +outfile +Base name for input[ti2]/output[ti3] file diff --git a/debian/man/collink.1 b/debian/man/collink.1 new file mode 100644 index 0000000..35d6c02 --- /dev/null +++ b/debian/man/collink.1 @@ -0,0 +1,241 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH LINK "1" "September 2014" "collink" "User Commands" +.SH NAME +Link \- Link ICC profiles. +.SH DESCRIPTION +Link ICC profiles +.SH SYNOPSIS +.B collink +.RB [options]\ srcprofile\ dstprofile\ linkedprofile +.TP +\fB\-v\fR Verbose +.HP +\fB\-A\fR manufacturer Manufacturer description string +.TP +\fB\-M\fR model +Model description string +.TP +\fB\-D\fR description +Profile Description string (Default "inoutfile") +.TP +\fB\-C\fR copyright +Copyright string +.TP +\fB\-V\fR +Verify existing profile, rather than link +.TP +\fB\-q\fR lmhu +Quality \- Low, Medium (def), High, Ultra +.TP +\fB\-r\fR res +Override clut res. set by \fB\-q\fR +.TP +\fB\-n\fR +Don't preserve device linearization curves in result +.TP +\fB\-f\fR +Special :\- Force neutral colors to be K only output +.TP +\fB\-fk\fR +Special :\- Force K only neutral colors to be K only output +.TP +\fB\-F\fR +Special :\- Force all colors to be K only output +.TP +\fB\-fcmy\fR +Special :\- Force 100% C,M or Y only to stay pure +.TP +\fB\-p\fR absprof +Include abstract profile in link +.TP +\fB\-a\fR file.cal +Apply calibration curves to link output and append linear +.TP +\fB\-H\fR file.cal +Append calibration curves to 3dlut +.TP +\fB\-s\fR +Simple Mode (default) +.TP +\fB\-g\fR [src.gam] +Gamut Mapping Mode [optional source image gamut] +.TP +\fB\-G\fR [src.gam] +Gamut Mapping Mode using inverse outprofile A2B +.IP +Simple Mode Options: +\fB\-i\fR in_intent p = perceptual, r = relative colorimetric, +.IP +s = saturation, a = absolute colorimetric +.TP +\fB\-o\fR out_intent +p = perceptual, r = relative colorimetric, +s = saturation, a = absolute colorimetric +.TP +Gamut Mapping +Mode Options: +.TP +\fB\-i\fR intent +set linking intent from the following choice: +.IP +a \- Absolute Colorimetric (in Jab) [ICC Absolute Colorimetric] +.IP +aw \- Absolute Colorimetric (in Jab) with scaling to fit white point +aa \- Absolute Appearance +.IP +r \- White Point Matched Appearance [ICC Relative Colorimetric] +.IP +la \- Luminance axis matched Appearance +.IP +p \- Perceptual (Preferred) (Default) [ICC Perceptual] +.IP +pa \- Perceptual Apperance +ms \- Saturation +.IP +s \- Enhanced Saturation [ICC Saturation] +.IP +al \- Absolute Colorimetric (Lab) +rl \- White Point Matched Colorimetric (Lab) +.TP +\fB\-w\fR [J,a,b] +Use forced whitepoint hack [optional target point] +.TP +\fB\-c\fR viewcond +set source viewing conditions for CIECAM02, +either an enumerated choice, or a parameter +.TP +\fB\-d\fR viewcond +set destination viewing conditions for CIECAM02, +either an enumerated choice, or parameter:value changes +.IP +pp \- Practical Reflection Print (ISO\-3664 P2) +pe \- Print evaluation environment (CIE 116\-1995) +pc \- Critical print evaluation environment (ISO\-3664 P1) +mt \- Monitor in typical work environment +mb \- Bright monitor in bright work environment +md \- Monitor in darkened work environment +jm \- Projector in dim environment +jd \- Projector in dark environment +tv \- Television/Film Studio +.IP +pcd \- Photo CD \- original scene outdoors +.IP +ob \- Original scene \- Bright Outdoors +cx \- Cut Sheet Transparencies on a viewing box +.TP +s:surround +n = auto, a = average, m = dim, d = dark, +c = transparency (default average) +.TP +w:X:Y:Z +Adapted white point as XYZ (default media white) +.TP +w:x:y +Adapted white point as x, y +.TP +a:adaptation +Adaptation luminance in cd.m^2 (default 50.0) +.TP +b:background +Background % of image luminance (default 20) +.TP +l:imagewhite +Image white in cd.m^2 if surround = auto (default 250) +.TP +f:flare +Flare light % of image luminance (default 0) +.TP +g:glare +Flare light % of ambient (default 1) +.TP +g:X:Y:Z +Flare color as XYZ (default media white, Abs: D50) +.TP +g:x:y +Flare color as x, y +.TP +\fB\-t\fR tlimit +set source total ink limit, 0 \- 400% (estimate by default) +.TP +\fB\-T\fR klimit +set source black ink limit, 0 \- 100% (estimate by default) +.IP +Inverse outprofile A2B Options: +\fB\-k\fR tezhxr CMYK Black generation +.IP +t = transfer K from source to destination, e = retain K of destination B2A table +z = zero K, h = 0.5 K, x = maximum K, r = ramp K (default) +.HP +\fB\-k\fR p stle stpo enpo enle shape +.IP +p = black target generation curve parameters +.HP +\fB\-k\fR q stle0 stpo0 enpo0 enle0 shape0 stle2 stpo2 enpo2 enle2 shape2 +.IP +q = transfer source K to dual curve limits +.TP +\fB\-K\fR parameters +Same as \fB\-k\fR, but target is K locus rather than K value itself +.TP +\fB\-l\fR tlimit +set destination total ink limit, 0 \- 400% (estimate by default) +.TP +\fB\-L\fR klimit +set destination black ink limit, 0 \- 100% (estimate by default) +.TP +\fB\-3\fR flag +Create "3DLut" output file as well as devlink +.TP +e +eeColor .txt file +.TP +m +MadVR .3dlut file +.TP +\fB\-I\fR b +Apply BT.1886\-like mapping with effective gamma 2.2 to input +.TP +\fB\-I\fR b:g.g +Apply BT.1886\-like mapping with effective gamma g.g to input +.TP +\fB\-I\fR B +Apply BT.1886 mapping with technical gamma 2.4 to input +.TP +\fB\-I\fR B:g.g +Apply BT.1886 mapping with technical gamma g.g to input +.TP +\fB\-e\fR flag +Video encode input as: +.TP +\fB\-E\fR flag +Video encode output as: +.TP +n +normal 0..1 full range RGB levels (default) +.TP +t +(16\-235)/255 "TV" RGB levels +.TP +6 +Rec601 YCbCr SD (16\-235,240)/255 "TV" levels +.TP +7 +Rec709 1125/60Hz YCbCr HD (16\-235,240)/255 "TV" levels +.TP +5 +Rec709 1250/50Hz YCbCr HD (16\-235,240)/255 "TV" levels +.TP +2 +Rec2020 YCbCr UHD (16\-235,240)/255 "TV" levels +.TP +C +Rec2020 Constant Luminance YCbCr UHD (16\-235,240)/255 "TV" levels +.TP +x +xvYCC Rec601 YCbCr Rec709 Prims. SD (16\-235,240)/255 "TV" levels +.TP +X +xvYCC Rec709 YCbCr Rec709 Prims. HD (16\-235,240)/255 "TV" levels +.TP +\fB\-P\fR +Create gamut gammap.wrl diagostic diff --git a/debian/man/colprof.1 b/debian/man/colprof.1 new file mode 100644 index 0000000..cf8b9b1 --- /dev/null +++ b/debian/man/colprof.1 @@ -0,0 +1,186 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH CREATE "1" "September 2014" "colprof" "User Commands" +.SH NAME +Create \- Create ICC profile. +.SH DESCRIPTION +Create ICC profile +.SH SYNOPSIS +.B colprof +.RB [\-options]\ inoutfile +.TP +\fB\-v\fR +Verbose mode +.HP +\fB\-A\fR manufacturer Manufacturer description string +.TP +\fB\-M\fR model +Model description string +.TP +\fB\-D\fR description +Profile Description string (Default "inoutfile") +.TP +\fB\-C\fR copyright +Copyright string +.TP +\fB\-Z\fR tmnb +Attributes: Transparency, Matte, Negative, BlackAndWhite +.TP +\fB\-Z\fR prsa +Default intent: Perceptual, Rel. Colorimetric, Saturation, Abs. Colorimetric +.TP +\fB\-q\fR lmhu +Quality \- Low, Medium (def), High, Ultra +.TP +\fB\-b\fR [lmhun] +Low quality B2A table \- or specific B2A quality or none for input device +.TP +\fB\-ni\fR +Don't create input (Device) shaper curves +.TP +\fB\-np\fR +Don't create input (Device) grid position curves +.TP +\fB\-no\fR +Don't create output (PCS) shaper curves +.TP +\fB\-nc\fR +Don't put the input .ti3 data in the profile +.TP +\fB\-k\fR zhxr +Black value target: z = zero K, +h = 0.5 K, x = max K, r = ramp K (def.) +.HP +\fB\-k\fR p stle stpo enpo enle shape +.IP +stle: K level at White 0.0 \- 1.0 +stpo: start point of transition Wh 0.0 \- Bk 1.0 +enpo: End point of transition Wh 0.0 \- Bk 1.0 +enle: K level at Black 0.0 \- 1.0 +shape: 1.0 = straight, 0.0\-1.0 concave, 1.0\-2.0 convex +.TP +\fB\-K\fR parameters +Same as \fB\-k\fR, but target is K locus rather than K value itself +.TP +\fB\-l\fR tlimit +override total ink limit, 0 \- 400% (default from .ti3) +.TP +\fB\-L\fR klimit +override black ink limit, 0 \- 100% (default from .ti3) +.TP +\fB\-a\fR lxXgsmGS +Algorithm type override +l = Lab cLUT (def.), x = XYZ cLUT, X = display XYZ cLUT + matrix +g = gamma+matrix, s = shaper+matrix, m = matrix only, +G = single gamma+matrix, S = single shaper+matrix +.TP +\fB\-u\fR +If input profile, auto scale WP to allow extrapolation +.TP +\fB\-uc\fR +If input profile, clip cLUT values above WP +.TP +\fB\-U\fR scale +If input profile, scale media white point by scale +.TP +\fB\-R\fR +Restrict white <= 1.0, black and primaries to be +ve +.TP +\fB\-V\fR demphasis +Degree of dark region cLUT grid emphasis 1.0\-4.0 (default 1.00 = none) +.TP +\fB\-f\fR [illum] +Use Fluorescent Whitening Agent compensation [opt. simulated inst. illum.: +.IP +M0, M1, M2, A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp] +.TP +\fB\-i\fR illum +Choose illuminant for computation of CIE XYZ from spectral data & FWA: +.IP +A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp +.TP +\fB\-o\fR observ +Choose CIE Observer for spectral data: +.IP +1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2 +.TP +\fB\-r\fR avgdev +Average deviation of device+instrument readings as a percentage (default 0.50%) +.TP +\fB\-s\fR src.icc +Apply gamut mapping to output profile perceptual B2A table for given source space +.TP +\fB\-S\fR src.icc +Apply gamut mapping to output profile perceptual and saturation B2A table +.TP +\fB\-nP\fR +Use colormetric source gamut to make output profile perceptual table +.TP +\fB\-nS\fR +Use colormetric source gamut to make output profile saturation table +.TP +\fB\-g\fR src.gam +Use source image gamut as well for output profile gamut mapping +.TP +\fB\-p\fR absprof,... +Incorporate abstract profile(s) into output tables +.TP +\fB\-t\fR intent +Override gamut mapping intent for output profile perceptual table: +.TP +\fB\-T\fR intent +Override gamut mapping intent for output profile saturation table: +.IP +a \- Absolute Colorimetric (in Jab) [ICC Absolute Colorimetric] +.IP +aw \- Absolute Colorimetric (in Jab) with scaling to fit white point +aa \- Absolute Appearance +.IP +r \- White Point Matched Appearance [ICC Relative Colorimetric] +.IP +la \- Luminance axis matched Appearance +.IP +p \- Perceptual (Preferred) (Default) [ICC Perceptual] +.IP +pa \- Perceptual Apperance +ms \- Saturation +.IP +s \- Enhanced Saturation [ICC Saturation] +.IP +al \- Absolute Colorimetric (Lab) +rl \- White Point Matched Colorimetric (Lab) +.TP +\fB\-c\fR viewcond +set input viewing conditions for output profile CIECAM02 gamut mapping, +.IP +either an enumerated choice, or a parameter +.TP +\fB\-d\fR viewcond +set output viewing conditions for output profile CIECAM02 gamut mapping +.IP +either an enumerated choice, or a parameter +Also sets out of gamut clipping CAM space. +either an enumerated choice, or a series of parameters:value changes +.IP +pp \- Practical Reflection Print (ISO\-3664 P2) +pe \- Print evaluation environment (CIE 116\-1995) +pc \- Critical print evaluation environment (ISO\-3664 P1) +mt \- Monitor in typical work environment +mb \- Bright monitor in bright work environment +md \- Monitor in darkened work environment +jm \- Projector in dim environment +jd \- Projector in dark environment +tv \- Television/Film Studio +.IP +pcd \- Photo CD \- original scene outdoors +.IP +ob \- Original scene \- Bright Outdoors +cx \- Cut Sheet Transparencies on a viewing box +.TP +\fB\-P\fR +Create gamut gammap_p.wrl and gammap_s.wrl diagostics +.TP +\fB\-O\fR outputfile +Override the default output filename. +.TP +inoutfile +Base name for input.ti3/output.icc file diff --git a/debian/man/colverify.1 b/debian/man/colverify.1 new file mode 100644 index 0000000..392d8f0 --- /dev/null +++ b/debian/man/colverify.1 @@ -0,0 +1,68 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH VERIFY "1" "September 2014" "verfiy" "User Commands" +.SH NAME +Verify \- Verify CIE values. +.SH DESCRIPTION +Verify CIE values +.SH SYNOPSIS +.B verify +.RB [\-options]\ target.ti3\ measured.ti3 +.TP +\fB\-v\fR [n] +Verbose mode, n >= 2 print each value +.TP +\fB\-n\fR +Normalise each files reading to its white Y +.TP +\fB\-N\fR +Normalise each files reading to its white XYZ +.TP +\fB\-m\fR +Normalise each files reading to its white X+Y+Z +.TP +\fB\-D\fR +Use D50 100.0 as L*a*b* white reference +.TP +\fB\-c\fR +Show CIE94 delta E values +.TP +\fB\-k\fR +Show CIEDE2000 delta E values +.TP +\fB\-s\fR +Sort patch values by error +.TP +\fB\-w\fR +create VRML vector visualisation (measured.wrl) +.TP +\fB\-W\fR +create VRML marker visualisation (measured.wrl) +.TP +\fB\-x\fR +Use VRML axes +.TP +\fB\-f\fR [illum] +Use Fluorescent Whitening Agent compensation [opt. simulated inst. illum.: +.IP +M0, M1, M2, A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp] +.TP +\fB\-i\fR illum +Choose illuminant for computation of CIE XYZ from spectral data & FWA: +.IP +A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp +.TP +\fB\-o\fR observ +Choose CIE Observer for spectral data: +1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2 +.TP +\fB\-L\fR profile.icc +Skip any first file out of profile gamut patches +.TP +\fB\-X\fR file.ccmx +Apply Colorimeter Correction Matrix to second file +.TP +target.ti3 +Target (reference) PCS or spectral values. +.TP +measured.ti3 +Measured (actual) PCS or spectral values diff --git a/debian/man/dispcal.1 b/debian/man/dispcal.1 new file mode 100644 index 0000000..20e9442 --- /dev/null +++ b/debian/man/dispcal.1 @@ -0,0 +1,156 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH CALIBRATE "1" "September 2014" "dispcal" "User Commands" +.SH NAME +Calibrate \- Calibrate a Display. +.SH DESCRIPTION +Calibrate a Display +.SH SYNOPSIS +.B dispcal +.RB [options]\ outfile +.TP +\fB\-v\fR [n] +Verbose mode +.HP +\fB\-display\fR displayname Choose X11 display name +.TP +\fB\-d\fR n[,m] +Choose the display n from the following list (default 1) +Optionally choose different display m for VideoLUT access +.IP +1 = 'Screen 1, Output DVI\-I\-1 at 0, 0, width 1920, height 1080' +.TP +\fB\-dweb[\fR:port] +Display via a web server at port (default 8080) +.TP +\fB\-c\fR listno +Set communication port from the following list (default 1) +.IP +** No ports found ** +.TP +\fB\-r\fR +Report on the calibrated display then exit +.TP +\fB\-R\fR +Report on the uncalibrated display then exit +.TP +\fB\-m\fR +Skip adjustment of the monitor controls +.TP +\fB\-o\fR [profile.icc] +Create fast matrix/shaper profile [different filename to outfile.icc] +.TP +\fB\-O\fR "description" +Fast ICC Profile Description string (Default "outfile") +.TP +\fB\-u\fR +Update previous calibration and (if \fB\-o\fR used) ICC profile VideoLUTs +.TP +\fB\-q\fR [vlmh] +Quality \- Very Low, Low, Medium (def), High +.TP +\fB\-p\fR +Use telephoto mode (ie. for a projector) (if available) +.TP +\fB\-t\fR [temp] +White Daylight locus target, optional target temperaturee in deg. K (deflt.) +.TP +\fB\-T\fR [temp] +White Black Body locus target, optional target temperaturee in deg. K +.TP +\fB\-w\fR x,y +Set the target white point as chromaticity coordinates +.TP +\fB\-b\fR bright +Set the target white brightness in cd/m^2 +.TP +\fB\-g\fR gamma +Set the target response curve advertised gamma (Def. 2.4) +Use "\-gl" for L*a*b* curve +Use "\-gs" for sRGB curve +Use "\-g709" for REC 709 curve (should use \fB\-a\fR as well!) +Use "\-g240" for SMPTE 240M curve (should use \fB\-a\fR as well!) +Use "\-G2.4 \fB\-f0\fR" for BT.1886 +.TP +\fB\-G\fR gamma +Set the target response curve actual technical gamma +.TP +\fB\-f\fR [degree] +Amount of black level accounted for with output offset (default all output offset) +.TP +\fB\-a\fR ambient +Use viewing condition adjustment for ambient in Lux +.TP +\fB\-k\fR factor +Amount to correct black hue, 0 = none, 1 = full, Default = Automatic +.TP +\fB\-A\fR rate +Rate of blending from neutral to black point. Default 4.0 +.TP +\fB\-B\fR blkbright +Set the target black brightness in cd/m^2 +.TP +\fB\-e\fR [n] +Run n verify passes on final curves +.TP +\fB\-z\fR +Run only verify pass on installed calibration curves +.TP +\fB\-P\fR ho,vo,ss[,vs] +Position test window and scale it +ho,vi: 0.0 = left/top, 0.5 = center, 1.0 = right/bottom etc. +ss: 0.5 = half, 1.0 = normal, 2.0 = double etc. +.TP +\fB\-F\fR +Fill whole screen with black background +.TP +\fB\-n\fR +Don't set override redirect on test window +.TP +\fB\-E\fR +Encode the test values for video range 16..235/255 +.TP +\fB\-J\fR +Run instrument calibration first (used rarely) +.TP +\fB\-N\fR +Disable initial calibration of instrument if possible +.TP +\fB\-H\fR +Use high resolution spectrum mode (if available) +.TP +\fB\-X\fR file.ccmx +Apply Colorimeter Correction Matrix +.TP +\fB\-X\fR file.ccss +Use Colorimeter Calibration Spectral Samples for calibration +.TP +\fB\-Q\fR observ +Choose CIE Observer for spectrometer or CCSS colorimeter data: +1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2, 1964_10c +.TP +\fB\-I\fR b|w +Drift compensation, Black: \fB\-Ib\fR, White: \fB\-Iw\fR, Both: \fB\-Ibw\fR +.TP +\fB\-Y\fR R:rate +Override measured refresh rate with rate Hz +.TP +\fB\-Y\fR A +Use non\-adaptive integration time mode (if available). +.TP +\fB\-Y\fR p +Don't wait for the instrument to be placed on the display +.TP +\fB\-C\fR "command" +Invoke shell "command" each time a color is set +.TP +\fB\-M\fR "command" +Invoke shell "command" each time a color is measured +.TP +\fB\-W\fR n|h|x +Override serial port flow control: n = none, h = HW, x = Xon/Xoff +.TP +\fB\-D\fR [level] +Print debug diagnostics to stderr +.TP +inoutfile +Base name for created or updated .cal and .icc output files diff --git a/debian/man/dispread.1 b/debian/man/dispread.1 new file mode 100644 index 0000000..a19b8c7 --- /dev/null +++ b/debian/man/dispread.1 @@ -0,0 +1,103 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH READ "1" "September 2014" "dispread" "User Commands" +.SH NAME +Read \- Read a Display. +.SH DESCRIPTION +Read a Display +.SH SYNOPSIS +.B dispread +.RB [options]\ outfile +.TP +\fB\-v\fR +Verbose mode +.HP +\fB\-display\fR displayname Choose X11 display name +.TP +\fB\-d\fR n[,m] +Choose the display n from the following list (default 1) +Optionally choose different display m for VideoLUT access +.IP +1 = 'Screen 1, Output DVI\-I\-1 at 0, 0, width 1920, height 1080' +.TP +\fB\-dweb[\fR:port] +Display via a web server at port (default 8080) +.TP +\fB\-c\fR listno +Set communication port from the following list (default 1) +.IP +** No ports found ** +.TP +\fB\-p\fR +Use telephoto mode (ie. for a projector) (if available) +.TP +\fB\-k\fR file.cal +Load calibration file into display while reading +.TP +\fB\-K\fR file.cal +Apply calibration file to test values while reading +.TP +\fB\-s\fR +Save spectral information (default don't save) +.TP +\fB\-P\fR ho,vo,ss[,vs] +Position test window and scale it +ho,vi: 0.0 = left/top, 0.5 = center, 1.0 = right/bottom etc. +ss: 0.5 = half, 1.0 = normal, 2.0 = double etc. +.TP +\fB\-F\fR +Fill whole screen with black background +.TP +\fB\-n\fR +Don't set override redirect on test window +.TP +\fB\-E\fR +Encode the test values for video range 16..235/255 +.TP +\fB\-J\fR +Run instrument calibration first (used rarely) +.TP +\fB\-N\fR +Disable initial calibration of instrument if possible +.TP +\fB\-H\fR +Use high resolution spectrum mode (if available) +.TP +\fB\-w\fR +Disable normalisation of white to Y = 100 +.TP +\fB\-X\fR file.ccmx +Apply Colorimeter Correction Matrix +.TP +\fB\-X\fR file.ccss +Use Colorimeter Calibration Spectral Samples for calibration +.TP +\fB\-Q\fR observ +Choose CIE Observer for spectrometer or CCSS colorimeter data: +1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2, 1964_10c +.TP +\fB\-I\fR b|w +Drift compensation, Black: \fB\-Ib\fR, White: \fB\-Iw\fR, Both: \fB\-Ibw\fR +.TP +\fB\-Y\fR R:rate +Override measured refresh rate with rate Hz +.TP +\fB\-Y\fR A +Use non\-adaptive integration time mode (if available). +.TP +\fB\-Y\fR p +Don't wait for the instrument to be placed on the display +.TP +\fB\-C\fR "command" +Invoke shell "command" each time a color is set +.TP +\fB\-M\fR "command" +Invoke shell "command" each time a color is measured +.TP +\fB\-W\fR n|h|x +Override serial port flow control: n = none, h = HW, x = Xon/Xoff +.TP +\fB\-D\fR [level] +Print debug diagnostics to stderr +.TP +outfile +Base name for input[ti1]/output[ti3] file diff --git a/debian/man/dispwin.1 b/debian/man/dispwin.1 new file mode 100644 index 0000000..c4c7594 --- /dev/null +++ b/debian/man/dispwin.1 @@ -0,0 +1,81 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH TEST "1" "September 2014" "dispwin" "User Commands" +.SH NAME +Test \- Test display patch window, Set Video LUTs, Install profiles. +.SH DESCRIPTION +Test display patch window, Set Video LUTs, Install profiles +.SH SYNOPSIS +.B dispwin +.RB [options]\ [calfile] +.TP +\fB\-v\fR +Verbose mode +.HP +\fB\-display\fR displayname Choose X11 display name +.TP +\fB\-d\fR n[,m] +Choose the display n from the following list (default 1) +Optionally choose different display m for Video LUT access +.IP +1 = 'Screen 1, Output DVI\-I\-1 at 0, 0, width 1920, height 1080' +.TP +\fB\-dweb[\fR:port] +Display via a web server at port (default 8080) +.TP +\fB\-P\fR ho,vo,ss[,vs] +Position test window and scale it +.TP +\fB\-F\fR +Fill whole screen with black background +.TP +\fB\-i\fR +Run forever with random values +.TP +\fB\-G\fR filename +Display RGB colors from CGATS file +.TP +\fB\-C\fR r.rr,g.gg,b.bb +Add this RGB color to list to be displayed +.TP +\fB\-m\fR +Manually cycle through values +.TP +\fB\-f\fR +Test grey ramp fade +.TP +\fB\-r\fR +Test just Video LUT loading & Beeps +.TP +\fB\-n\fR +Test native output (rather than through Video LUT and C.M.) +.TP +\fB\-s\fR filename +Save the currently loaded Video LUT to 'filename' +.TP +\fB\-c\fR +Load a linear display calibration +.TP +\fB\-V\fR +Verify that calfile/profile cal. is currently loaded in LUT +.TP +\fB\-I\fR +Install profile for display and use it's calibration +.TP +\fB\-U\fR +Un\-install profile for display +.TP +\fB\-S\fR d +Specify the install/uninstall scope for OS X [nlu] or X11/Vista [lu] +d is one of: n = network, l = local system, u = user (default) +.TP +\fB\-L\fR +Load installed profiles cal. into Video LUT +.TP +\fB\-X\fR +Run in daemon loader mode for given X11 server +.TP +\fB\-D\fR [level] +Print debug diagnostics to stderr +.TP +calfile +Load calibration (.cal or .icc) into Video LUT diff --git a/debian/man/extracticc.1 b/debian/man/extracticc.1 new file mode 100644 index 0000000..9d5adad --- /dev/null +++ b/debian/man/extracticc.1 @@ -0,0 +1,12 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH EXTRACT "1" "September 2014" "extracticc" "User Commands" +.SH NAME +Extract \- Extract an ICC profile from a TIFF file. +.SH DESCRIPTION +Extract an ICC profile from a TIFF or JPEG file +.SH SYNOPSIS +.B extracticc +.RB [\-v]\ infile.(tif|jpg)\ outfile.icc +.TP +\fB\-v\fR +Verbose diff --git a/debian/man/extractttag.1 b/debian/man/extractttag.1 new file mode 100644 index 0000000..eac947a --- /dev/null +++ b/debian/man/extractttag.1 @@ -0,0 +1,18 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH EXTRACT "1" "September 2014" "extractttag" "User Commands" +.SH NAME +Extract \- Extract a text tag from an ICC profile. +.SH DESCRIPTION +Extract a text tag from an ICC profile +.SH SYNOPSIS +.B extractttag +.RB [\-v]\ infile.icc\ outfile +.TP +\fB\-v\fR +Verbose +.TP +\fB\-t\fR tag +Extract this tag rather than default 'targ' +.TP +\fB\-c\fR +Extract calibration file from 'targ' tag diff --git a/debian/man/fakeCMY.1 b/debian/man/fakeCMY.1 new file mode 100644 index 0000000..6509ad6 --- /dev/null +++ b/debian/man/fakeCMY.1 @@ -0,0 +1,21 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH CREATE "1" "September 2014" "fakeCMY" "User Commands" +.SH NAME +Create \- Create a fake CMY data file from a CMYK profile. +.SH DESCRIPTION +Create a fake CMY data file from a CMYK profile +.SH SYNOPSIS +.B fakeCMY +.RB [option]\ profile.icm\ fake.ti3 +.TP +\fB\-v\fR +verbose +.TP +\fB\-r\fR res +set surface point resolution (default 3) +.TP +\fB\-l\fR tlimit +set total ink limit, 0 \- 400% (estimate by default) +.TP +\fB\-L\fR klimit +set black ink limit, 0 \- 100% (estimate by default) diff --git a/debian/man/fakeread.1 b/debian/man/fakeread.1 new file mode 100644 index 0000000..1af12e0 --- /dev/null +++ b/debian/man/fakeread.1 @@ -0,0 +1,90 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH FAKE "1" "September 2014" "fakeread" "User Commands" +.SH NAME +Fake \- Fake test chart reader - lookup values in ICC/MPP profile. +.SH DESCRIPTION +Fake test chart reader \- lookup values in ICC/MPP profile +.SH SYNOPSIS +.B fakeread +.RB [\-options]\ profile.[icc|mpp|ti3]\ outfile +.TP +\fB\-v\fR [n] +Verbose mode [level] +.TP +\fB\-e\fR flag +Video encode device input to sepration as: +.TP +n +normal 0..1 full range RGB levels (default) +.TP +t +(16\-235)/255 "TV" RGB levels +.TP +6 +Rec601 YCbCr SD (16\-235,240)/255 "TV" levels +.TP +7 +Rec709 1125/60Hz YCbCr HD (16\-235,240)/255 "TV" levels +.TP +5 +Rec709 1250/50Hz YCbCr HD (16\-235,240)/255 "TV" levels +.TP +2 +Rec2020 YCbCr UHD (16\-235,240)/255 "TV" levels +.TP +C +Rec2020 Constant Luminance YCbCr UHD (16\-235,240)/255 "TV" levels +.HP +\fB\-p\fR separation.icc Use device link separation profile on input +.TP +\fB\-E\fR flag +Video decode separation device output. See \fB\-e\fR above +.TP +\fB\-k\fR file.cal +Apply calibration (include in .ti3 output) +.TP +\fB\-i\fR file.cal +Include calibration in .ti3 output, but don't apply it +.TP +\fB\-K\fR file.cal +Apply inverse calibration +.TP +\fB\-r\fR level +Add average random deviation of <level>% to device values (after sep. & cal.) +.TP +\fB\-0\fR pow +Apply power to device chanel 0\-9 +.TP +\fB\-b\fR output.icc +Apply BT.1886\-like mapping with effective gamma 2.2 +.HP +\fB\-b\fR g.g:output.icc Apply BT.1886\-like mapping with effective gamma g.g +.TP +\fB\-B\fR output.icc +Apply BT.1886 mapping with technical gamma 2.4 +.HP +\fB\-B\fR g.g:output.icc Apply BT.1886 mapping with technical gamma g.g +.TP +\fB\-I\fR intent +r = relative colorimetric, a = absolute (default) +.TP +\fB\-A\fR L,a,b +Scale black point to target Lab value +.TP +\fB\-l\fR +Output Lab rather than XYZ +.TP +\fB\-s\fR +Lookup MPP spectral values +.TP +\fB\-R\fR level +Add average random deviation of <level>% to output PCS values +.TP +\fB\-u\fR +Make random deviations have uniform distributions rather than normal +.TP +\fB\-S\fR seed +Set random seed +.IP +profile.[icc|mpp|ti3] ICC, MPP profile or TI3 to use +outfile Base name for input[ti1]/output[ti3] file diff --git a/debian/man/greytiff.1 b/debian/man/greytiff.1 new file mode 100644 index 0000000..f1b71d6 --- /dev/null +++ b/debian/man/greytiff.1 @@ -0,0 +1,18 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH CONVERT "1" "September 2014" "greytiff" "User Commands" +.SH NAME +Convert \- Convert a TIFF file to monochrome using an ICC device profile. +.SH DESCRIPTION +Convert a TIFF file to monochrome using an ICC device profile +.SH SYNOPSIS +.B greytiff +.RB [\-v\ level]\ profile.icm\ infile.tif\ outfile.tif +.TP +\fB\-v\fR +Verbose +.TP +\fB\-p\fR +Use slow precise correction +.TP +\fB\-j\fR +Use CIECAM02 diff --git a/debian/man/iccdump.1 b/debian/man/iccdump.1 new file mode 100644 index 0000000..e508f13 --- /dev/null +++ b/debian/man/iccdump.1 @@ -0,0 +1,21 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH DUMP "1" "September 2014" "iccdump" "User Commands" +.SH NAME +Dump \- Dump an ICC file in human readable form. +.SH DESCRIPTION +Dump an ICC file in human readable form +.SH SYNOPSIS +.B iccdump +.RB [\-v\ level]\ [\-t\ tagname]\ [\-s]\ infile +.TP +\fB\-v\fR level +Verbose level 1\-3 (default 2) +.TP +\fB\-t\fR tag +Dump this tag only (can be used multiple times) +.TP +\fB\-s\fR +Search for embedded profile +.TP +\fB\-i\fR +Check V4 ID value diff --git a/debian/man/iccgamut.1 b/debian/man/iccgamut.1 new file mode 100644 index 0000000..2aa40ff --- /dev/null +++ b/debian/man/iccgamut.1 @@ -0,0 +1,97 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH CREATE "1" "September 2014" "iccgamut" "User Commands" +.SH NAME +Create \- Create Lab/Jab gamut plot. +.SH DESCRIPTION +Create Lab/Jab gamut plot +.SH SYNOPSIS +.B iccgamut +.RB [options]\ profile +.TP +\fB\-v\fR +Verbose +.TP +\fB\-d\fR sres +Surface resolution details 1.0 \- 50.0 +.TP +\fB\-w\fR +emit VRML .wrl file as well as CGATS .gam file +.TP +\fB\-n\fR +Don't add VRML axes or white/black point +.TP +\fB\-k\fR +Add VRML markers for prim. & sec. "cusp" points +.TP +\fB\-f\fR function +f = forward*, b = backwards +.TP +\fB\-i\fR intent +p = perceptual, r = relative colorimetric, +s = saturation, a = absolute (default), d = profile default +.TP +\fB\-p\fR oride +l = Lab_PCS (default), j = CIECAM02 Appearance Jab +.TP +\fB\-o\fR order +n = normal (priority: lut > matrix > monochrome) +r = reverse (priority: monochrome > matrix > lut) +.TP +\fB\-l\fR tlimit +set total ink limit, 0 \- 400% (estimate by default) +.TP +\fB\-L\fR klimit +set black ink limit, 0 \- 100% (estimate by default) +.TP +\fB\-c\fR viewcond +set viewing conditions for CIECAM02, +either an enumerated choice, or a series of parameter:value changes +.IP +pp \- Practical Reflection Print (ISO\-3664 P2) +pe \- Print evaluation environment (CIE 116\-1995) +pc \- Critical print evaluation environment (ISO\-3664 P1) +mt \- Monitor in typical work environment +mb \- Bright monitor in bright work environment +md \- Monitor in darkened work environment +jm \- Projector in dim environment +jd \- Projector in dark environment +tv \- Television/Film Studio +.IP +pcd \- Photo CD \- original scene outdoors +.IP +ob \- Original scene \- Bright Outdoors +cx \- Cut Sheet Transparencies on a viewing box +.TP +s:surround +n = auto, a = average, m = dim, d = dark, +c = transparency (default average) +.TP +w:X:Y:Z +Adapted white point as XYZ (default media white) +.TP +w:x:y +Adapted white point as x, y +.TP +a:adaptation +Adaptation luminance in cd.m^2 (default 50.0) +.TP +b:background +Background % of image luminance (default 20) +.TP +l:imagewhite +Image white in cd.m^2 if surround = auto (default 250) +.TP +f:flare +Flare light % of image luminance (default 0) +.TP +g:glare +Flare light % of ambient (default 1) +.TP +g:X:Y:Z +Flare color as XYZ (default media white, Abs: D50) +.TP +g:x:y +Flare color as x, y +.TP +\fB\-s\fR +Create special cube surface topology plot diff --git a/debian/man/icclu.1 b/debian/man/icclu.1 new file mode 100644 index 0000000..5cccdde --- /dev/null +++ b/debian/man/icclu.1 @@ -0,0 +1,34 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH TRANSLATE "1" "September 2014" "icclu" "User Commands" +.SH NAME +Translate \- Translate colors through an ICC profile. +.SH DESCRIPTION +Translate colors through an ICC profile +.SH SYNOPSIS +.B icclu +.RB [\-v\ level]\ [\-f\ func]\ [\-i\ intent]\ [\-o\ order]\ profile +.TP +\fB\-v\fR level +Verbosity level 0 \- 2 (default = 1) +.TP +\fB\-f\fR function +f = forward, b = backwards, g = gamut, p = preview +.TP +\fB\-i\fR intent +p = perceptual, r = relative colorimetric, +s = saturation, a = absolute +.TP +\fB\-p\fR oride +x = XYZ_PCS, l = Lab_PCS, y = Yxy, +.TP +\fB\-o\fR order +n = normal (priority: lut > matrix > monochrome) +r = reverse (priority: monochrome > matrix > lut) +.TP +\fB\-s\fR scale +Scale device range 0.0 \- scale rather than 0.0 \- 1.0 +.IP +The colors to be translated should be fed into standard input, +one input color per line, white space separated. +A line starting with a # will be ignored. +A line not starting with a number will terminate the program. diff --git a/debian/man/illumread.1 b/debian/man/illumread.1 new file mode 100644 index 0000000..aaec8c3 --- /dev/null +++ b/debian/man/illumread.1 @@ -0,0 +1,41 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH MEASURE "1" "September 2014" "illumread" "User Commands" +.SH NAME +Measure \- Measure an illuminant. +.SH DESCRIPTION +Measure an illuminant +.SH SYNOPSIS +.B illumread +.RB [\-options]\ output.sp +.TP +\fB\-v\fR +Verbose mode +.TP +\fB\-S\fR +Plot spectrum for each reading +.TP +\fB\-c\fR listno +Choose instrument from the following list (default 1) +.IP +** No ports found ** +.TP +\fB\-N\fR +Disable initial calibration of instrument if possible +.TP +\fB\-H\fR +Use high resolution spectrum mode (if available) +.TP +\fB\-Y\fR r +Set refresh measurement mode +.TP +\fB\-Y\fR R:rate +Override measured refresh rate with rate Hz +.TP +\fB\-W\fR n|h|x +Override serial port flow control: n = none, h = HW, x = Xon/Xoff +.TP +\fB\-D\fR [level] +Print debug diagnostics to stderr +.TP +illuminant.sp +File to save measurement to diff --git a/debian/man/invprofcheck.1 b/debian/man/invprofcheck.1 new file mode 100644 index 0000000..60d897b --- /dev/null +++ b/debian/man/invprofcheck.1 @@ -0,0 +1,45 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH CHECK "1" "September 2014" "invprofcheck" "User Commands" +.SH NAME +Check \- Check fwd to bwd relative transfer of an ICC file. +.SH DESCRIPTION +Check fwd to bwd relative transfer of an ICC file +.SH SYNOPSIS +.B invprofcheck +.RB [\-]\ profile.icm +.TP +\fB\-v\fR [level] +verbosity level (default 1), 2 to print each DE +.TP +\fB\-l\fR limit +set total ink limit (estimate by default) +.TP +\fB\-L\fR klimit +set black channel ink limit (estimate by default) +.TP +\fB\-h\fR +high res test (27) +.TP +\fB\-u\fR +Ultra high res test (61) +.TP +\fB\-R\fR res +Specific grid resolution +.TP +\fB\-c\fR +Show CIE94 delta E values +.TP +\fB\-k\fR +Show CIEDE2000 delta E values +.TP +\fB\-w\fR +create VRML visualisation (profile.wrl) +.TP +\fB\-x\fR +Use VRML axes +.TP +\fB\-e\fR +Color vectors according to delta E +.TP +profile.icm +Profile to check diff --git a/debian/man/kodak2ti3.1 b/debian/man/kodak2ti3.1 new file mode 100644 index 0000000..45abd06 --- /dev/null +++ b/debian/man/kodak2ti3.1 @@ -0,0 +1,24 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH CONVERT "1" "September 2014" "kodak2ti3" "User Commands" +.SH NAME +Convert \- Convert Kodak raw printer profile data to Argyll print data. +.SH DESCRIPTION +Convert Kodak raw printer profile data to Argyll print data +.SH SYNOPSIS +.B kodak2ti3 +.RB [\-v]\ [\-l\ limit]\ infile\ outfile +.TP +\fB\-v\fR +Verbose mode +.TP +\fB\-l\fR limit +set ink limit, 0 \- 400% +.TP +\fB\-r\fR filename +Use an alternate 928 patch reference file +.TP +infile +Base name for input.pat file +.TP +outfile +Base name for output.ti3 file diff --git a/debian/man/ls2ti3.1 b/debian/man/ls2ti3.1 new file mode 100644 index 0000000..d7c7315 --- /dev/null +++ b/debian/man/ls2ti3.1 @@ -0,0 +1,13 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.46.6. +.TH CONVERT "1" "May 2015" "Convert LightSpace raw RGB device profile data to Argyll CGATS data, Version 1.7.0" "User Commands" +.SH NAME +Convert \- Convert LightSpace raw RGB device profile data to Argyll CGATS data +.SH DESCRIPTION +Convert LightSpace raw RGB device profile data to Argyll CGATS data, Version 1.7.0 +Author: Graeme W. Gill, licensed under the AGPL Version 3 +.TP +infile +Input LightSpace .bcs file +.TP +outbasename +Output file basename for .ti3 diff --git a/debian/man/mppcheck.1 b/debian/man/mppcheck.1 new file mode 100644 index 0000000..1cd6b16 --- /dev/null +++ b/debian/man/mppcheck.1 @@ -0,0 +1,29 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH CHECK "1" "September 2014" "mppcheck" "User Commands" +.SH NAME +Check \- Check Model Printer Profile. +.SH DESCRIPTION +Check Model Printer Profile +.SH SYNOPSIS +.B mppcheck +.RB [\-v]\ [\-c]\ [\-s]\ [\-y]\ values.ti3\ profile.mpp +.TP +\fB\-v\fR +Verbose mode +.TP +\fB\-c\fR +Show CIE94 delta E values +.TP +\fB\-k\fR +Show CIEDE2000 delta E values +.TP +\fB\-s\fR +Check spectral model too +.TP +\fB\-y\fR +Detail each value +.TP +values.ti3 +Test values to check against +.IP +profile.mpp Profile to check diff --git a/debian/man/mpplu.1 b/debian/man/mpplu.1 new file mode 100644 index 0000000..5651f26 --- /dev/null +++ b/debian/man/mpplu.1 @@ -0,0 +1,57 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH TRANSLATE "1" "September 2014" "" "User Commands" +.SH NAME +Translate \- Translate colors through an MPP profile. +.SH DESCRIPTION +Translate colors through an MPP profile +.SH SYNOPSIS +.B mpplu +.RB [\-v]\ [\-f\ func]\ [\-i\ intent]\ [\-o\ order]\ profile +.TP +\fB\-v\fR +Verbose +.TP +\fB\-f\fR function +f = forward, b = backwards +.TP +\fB\-p\fR oride +x = XYZ_PCS, l = Lab_PCS, y = Yxy, s = spectral, +.TP +\fB\-l\fR limit +override default ink limit, 1 \- N00% +.TP +\fB\-i\fR illum +Choose illuminant for print/transparency spectral data: +A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp +.TP +\fB\-o\fR observ +Choose CIE Observer for spectral data: +1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2 +.TP +\fB\-u\fR +Use Fluorescent Whitening Agent compensation +.TP +\fB\-g\fR +Create gamut output +.TP +\fB\-w\fR +Create gamut VRML as well +.TP +\fB\-n\fR +Don't add VRML axes +.TP +\fB\-a\fR n +Gamut transparency level +.TP +\fB\-d\fR n +Gamut surface detail level +.TP +\fB\-t\fR num +Invoke debugging test code "num" 1..n +1 \- check partial derivative for device input +2 \- create overlap diagnostic VRML gamut surface +.IP +The colors to be translated should be fed into stdin, +one input color per line, white space separated. +A line starting with a # will be ignored. +A line not starting with a number will terminate the program. diff --git a/debian/man/mppprof.1 b/debian/man/mppprof.1 new file mode 100644 index 0000000..13a18ef --- /dev/null +++ b/debian/man/mppprof.1 @@ -0,0 +1,30 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH CREATE "1" "September 2014" "mppprof" "User Commands" +.SH NAME +Create \- Create Model Printer Profile. +.SH DESCRIPTION +Create Model Printer Profile +.SH SYNOPSIS +.B mppprof +.RB [options]\ outfile +.HP +\fB\-v\fR [level] Verbose mode +.HP +\fB\-q\fR [lmhus] Quality \- Low, Medium (def), High, Ultra, Simple +.TP +\fB\-l\fR limit +override default ink limit, 1 \- n00% +.TP +\fB\-s\fR +Generate spectral model too +.TP +\fB\-m\fR +Generate ink mixing model +.HP +\fB\-y\fR [level] Verify profile, 2 = read/write verify +.TP +\fB\-L\fR +Output Lab values +.TP +outfile +Base name for input.ti3/output.mpp file diff --git a/debian/man/oeminst.1 b/debian/man/oeminst.1 new file mode 100644 index 0000000..ea56505 --- /dev/null +++ b/debian/man/oeminst.1 @@ -0,0 +1,28 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH INSTALL "1" "September 2014" "oeminst" "User Commands" +.SH NAME +Install \- List information about the FILEs. +.SH DESCRIPTION +Install OEM data files +.SH SYNOPSIS +.B oeminst +.RB [\-options]\ [infile(s)] +.TP +\fB\-v\fR [level] +Verbose +.TP +\fB\-n\fR +Don't install, show where files would be installed +.TP +\fB\-c\fR +Don't install, save files to current directory +.TP +\fB\-S\fR d +Specify the install scope u = user (def.), l = local system] +.TP +infile +setup.exe CD install file(s) or .dll(s) containing install files +.TP +infile.[edr|ccss|ccmx] +EDR file(s) to translate and install or CCSS or CCMX files to install +If no file is provided, oeminst will look for the install CD. diff --git a/debian/man/printcal.1 b/debian/man/printcal.1 new file mode 100644 index 0000000..38038d6 --- /dev/null +++ b/debian/man/printcal.1 @@ -0,0 +1,77 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH CREATE "1" "September 2014" "printcal" "User Commands" +.SH NAME +Create \- Create printer calibration. +.SH DESCRIPTION +Create printer calibration +.SH SYNOPSIS +.B printcal +.RB [\-options]\ [prevcal]\ inoutfile +.TP +\fB\-v\fR verbosity +Verbose mode +.TP +\fB\-p\fR +Plot graphs. +.TP +\fB\-i\fR +Initial calibration, set targets, create .cal +.TP +\fB\-r\fR +Re\-calibrate against previous .cal and create new .cal +.TP +\fB\-e\fR +Verify against previous .cal +.TP +\fB\-I\fR +Create imitation target from .ti3 and null calibration +.TP +\fB\-d\fR +Go through the motions but don't write any files +.TP +\fB\-s\fR smoothing +Extra curve smoothing (default 1.0) +.HP +\fB\-A\fR manufacturer Set the manufacturer description string +.TP +\fB\-M\fR model +Set the model description string +.TP +\fB\-D\fR description +Set the profile Description string +.TP +\fB\-C\fR copyright +Set the copyright string +.TP +\fB\-x\fR# percent +Set initial maximum device % target (override auto) +.TP +\fB\-m\fR# percent +Set initial dev target to % of auto maximum +.TP +\fB\-n\fR# deltaE +Set initial white minimum deltaE target +.TP +\fB\-t\fR# percent +Set initial 50% transfer curve percentage target +.TP +# = c, r, 0 +First channel +.TP +m, g, 1 +Second channel +.TP +y, b, 2 +Third channel +.TP +k, +3 Fourth channel, etc. +.TP +\fB\-a\fR +Create an Adobe Photoshop .AMP file as well as a .cal +.TP +prevcal +Base name of previous .cal file for recal or verify. +.TP +inoutname +Base name of input .ti3 file, output .cal file diff --git a/debian/man/printtarg.1 b/debian/man/printtarg.1 new file mode 100644 index 0000000..59ad2ba --- /dev/null +++ b/debian/man/printtarg.1 @@ -0,0 +1,125 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH GENERATE "1" "September 2014" "printarg" "User Commands" +.SH NAME +Generate \- Generate Target PostScrip file. +.SH DESCRIPTION +Generate Target PostScrip file +.SH SYNOPSIS +.B printtarg +.RB [\-v]\ [\-i\ instr]\ [\-r]\ [\-s]\ [\-p\ size]\ basename +.TP +\fB\-v\fR +Verbose mode +.HP +\fB\-i\fR 20 | 22 | 41 | 51 | SS | i1 | CM Select target instrument (default DTP41) +.IP +20 = DTP20, 22 = DTP22, 41 = DTP41, 51 = DTP51, +SS = SpectroScan, i1 = i1Pro, CM = ColorMunki +.TP +\fB\-h\fR +Use hexagon patches for SS, double density for CM +.TP +\fB\-a\fR scale +Scale patch size and spacers by factor (e.g. 0.857 or 1.5 etc.) +.TP +\fB\-A\fR scale +Scale spacers by additional factor (e.g. 0.857 or 1.5 etc.) +.TP +\fB\-r\fR +Don't randomize patch location +.TP +\fB\-s\fR +Create a scan image recognition (.cht) file +.TP +\fB\-S\fR +Same as \fB\-s\fR, but don't generate wide orientation strip. +.TP +\fB\-c\fR +Force colored spacers +.TP +\fB\-b\fR +Force B&W spacers +.TP +\fB\-n\fR +Force no spacers +.TP +\fB\-f\fR +Create PostScript DeviceN Color fallback +.TP +\fB\-w\fR g|r|s|n +White colorspace encoding DeviceGray (def), DeviceRGB, Separation or DeviceN +.TP +\fB\-k\fR g|c|s|n +Black colorspace encoding DeviceGray (def), DeviceCMYK, Separation or DeviceN +.TP +\fB\-o\fR k|r|n +CMY colorspace encoding DefiveCMYK (def), inverted DeviceRGB or DeviceN +.TP +\fB\-e\fR +Output EPS compatible file +.TP +\fB\-t\fR [res] +Output 8 bit TIFF raster file, optional res DPI (default 100) +.TP +\fB\-T\fR [res] +Output 16 bit TIFF raster file, optional res DPI (default 100) +.TP +\fB\-C\fR +Don't use TIFF compression +.TP +\fB\-N\fR +Use TIFF alpha N channels more than 4 +.TP +\fB\-D\fR +Dither 8 bit TIFF values down from 16 bit +.TP +\fB\-Q\fR nbits +Quantize test values to fit in nbits +.TP +\fB\-R\fR rsnum +Use given random start number +.TP +\fB\-K\fR file.cal +Apply printer calibration to patch values and include in .ti2 +.TP +\fB\-I\fR file.cal +Include calibration in .ti2 (but don't apply it) +.TP +\fB\-x\fR pattern +Use given strip indexing pattern (Default = "A\-Z, A\-Z") +.TP +\fB\-y\fR pattern +Use given patch indexing pattern (Default = "0\-9,@\-9,@\-9;1\-999") +.TP +\fB\-m\fR margin +Set a page margin in mm (default 6.0 mm) +.TP +\fB\-M\fR margin +Set a page margin in mm and include it in TIFF +.TP +\fB\-P\fR +Don't limit strip length +.TP +\fB\-L\fR +Suppress any left paper clip border +.TP +\fB\-U\fR +Suppress CUPS cupsJobTicket: cups\-disable\-cmm in PS & EPS files +.TP +\fB\-p\fR size +Select page size from: +A4 [210.0 x 297.0 mm] +A4R [297.0 x 210.0 mm] +A3 [297.0 x 420.0 mm] (default) +A2 [420.0 x 594.0 mm] +Letter [215.9 x 279.4 mm] +LetterR [279.4 x 215.9 mm] +Legal [215.9 x 355.6 mm] +4x6 [101.6 x 152.4 mm] +11x17 [279.4 x 431.8 mm] +.TP +\fB\-p\fR WWWxHHH +Custom size, WWW mm wide by HHH mm high +.TP +basname +Base name for input(.ti1), output(.ti2) and output(.ps/.eps/.tif) diff --git a/debian/man/profcheck.1 b/debian/man/profcheck.1 new file mode 100644 index 0000000..683786a --- /dev/null +++ b/debian/man/profcheck.1 @@ -0,0 +1,61 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH CHECK "1" "September 2014" "profcheck" "User Commands" +.SH NAME +Check \- Check accuracy of ICC profile. +.SH DESCRIPTION +Check accuracy of ICC profile, Version 1.6.3 +.SH SYNOPSIS +.B profcheck +.RB [\-options]\ data.ti3\ iccprofile.icm +.TP +\fB\-v\fR [level] +Verbosity level (default 1), 2 to print each DE +.TP +\fB\-c\fR +Show CIE94 delta E values +.TP +\fB\-k\fR +Show CIEDE2000 delta E values +.TP +\fB\-w\fR +create VRML visualisation (iccprofile.wrl) +.TP +\fB\-x\fR +Use VRML axes +.TP +\fB\-m\fR +Make VRML lines a minimum of 0.5 +.TP +\fB\-e\fR +Color vectors according to delta E +.HP +\fB\-d\fR devval1,deval2,devvalN +.IP +Specify a device value to sort against +.TP +\fB\-p\fR +Sort device value by PCS (Lab) target +.TP +\fB\-f\fR [illum] +Use Fluorescent Whitening Agent compensation [opt. simulated inst. illum.: +.IP +M0, M1, M2, A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp] +.TP +\fB\-i\fR illum +Choose illuminant for computation of CIE XYZ from spectral data & FWA: +.IP +A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp +.TP +\fB\-o\fR observ +Choose CIE Observer for spectral data: +.IP +1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2 +.TP +\fB\-I\fR intent +r = relative colorimetric, a = absolute (default) +.TP +data.ti3 +Test data file +.TP +iccprofile.icm +Profile to check against diff --git a/debian/man/refine.1 b/debian/man/refine.1 new file mode 100644 index 0000000..8c05df5 --- /dev/null +++ b/debian/man/refine.1 @@ -0,0 +1,57 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH CREATE "1" "September 2014" "refine" "User Commands" +.SH NAME +Create \- Create abstract correction profile given table of absolute CIE correction values. +.SH DESCRIPTION +Create abstract correction profile given table of absolute CIE correction values, Version 1.6.3 +.SH SYNOPSIS +.B refine +.RB [\-options]\ cietarget\ ciecurrent\ [outdevicc]\ [inabs]\ outabs +.TP +\fB\-v\fR +Verbose +.TP +\fB\-c\fR +Create initial abstract correction profile +.TP +\fB\-g\fR +Don't impose output device gamut limit +.TP +\fB\-r\fR res +Set abstract profile clut resolution (default 33) +.TP +\fB\-d\fR factor +Override default damping factor (default 0.950000, then 0.700000) +.TP +\fB\-R\fR +Aim for white point relative match rather than absolute +.TP +\fB\-f\fR [illum] +Use Fluorescent Whitening Agent compensation [opt. simulated inst. illum.: +.IP +M0, M1, M2, A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp] +.TP +\fB\-i\fR illum +Choose illuminant for computation of CIE XYZ from spectral data & FWA: +.IP +A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp +.TP +\fB\-o\fR observ +Choose CIE Observer for spectral data: +.IP +1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2 +.TP +cietarget +Target CIE or spectral values, CGATS file (e.g. .ti3) +.TP +ciecurrent +Actual CIE or spectral values, CGATS file (e.g. .ti3) +.TP +[outdevicc] +Output device ICC profile to set gamut limit (not used if \fB\-g\fR) +.TP +[inabs] +Previous abstract correction ICC profile (not used if \fB\-c\fR) +.TP +outabs +Created/refined abstract correction ICC profile diff --git a/debian/man/revfix.1 b/debian/man/revfix.1 new file mode 100644 index 0000000..b6cc94c --- /dev/null +++ b/debian/man/revfix.1 @@ -0,0 +1,49 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH INVERT "1" "September 2014" "revfix" "User Commands" +.SH NAME +Invert \- Invert AtoB1 to make BtoA1 for CMYK profiles. +.SH DESCRIPTION +Invert AtoB1 to make BtoA1 for CMYK profiles, Version 1.6.3 +.SH SYNOPSIS +.B revfix +.RB [\-options]\ iccin\ iccout +.TP +\fB\-v\fR +Verbose +.TP +\fB\-0\fR +Process perceptual +.TP +\fB\-1\fR +Process absolute/relative colorimetric +.TP +\fB\-2\fR +Process saturation +.TP +\fB\-r\fR res +Override BtoA1 Clut res +.TP +\fB\-k\fR [ezhxr] +e = same K as existing BtoA table (def) +z = zero, h = 0.5 K, x = max K, r = ramp K +.HP +\fB\-k\fR p stle stpo enle enpo shape +.IP +p = curve parameters +stle: K level at White 0.0 \- 1.0 +stpo: start point of transition Wh 0.0 \- Bk 1.0 +enpo: End point of transition Wh 0.0 \- Bk 1.0 +enle: K level at Black 0.0 \- 1.0 +shape: 1.0 = straight, 0.0\-1.0 concave, 1.0\-2.0 convex +.TP +\fB\-K\fR parameters +Same as \fB\-k\fR, but target is K locus rather than K value itself +.TP +\fB\-l\fR tlimit +set total ink limit, 0 \- 400% (estimate by default) +.TP +\fB\-L\fR klimit +set black ink limit, 0 \- 100% (estimate by default) +.TP +\fB\-p\fR absprof +Include abstract profile in output tables diff --git a/debian/man/scanin.1 b/debian/man/scanin.1 new file mode 100644 index 0000000..e1d0656 --- /dev/null +++ b/debian/man/scanin.1 @@ -0,0 +1,114 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH SCANIN, "1" "September 2014" "scanin" "User Commands" +.SH NAME +Scanin, \- Scanin. +.SH DESCRIPTION +Scanin, Version 1.6.3 +.SH SYNOPSIS +.B scanin +.RB [options]\ input.tif\ recogin.cht\ valin.cie\ [diag.tif] +.IP +:\- inputs 'input.tif' and outputs scanner 'input.ti3', or +.PP +.B scanin +.RB \fB\-g\fR\ [options]\ input.tif\ recogout.cht\ [diag.tif] +.IP +:\- outputs file 'recogout.cht', or +.PP +.B scanin +.RB \fB\-o\fR\ [options]\ input.tif\ recogin.cht\ [diag.tif] +.IP +:\- outputs file 'input.val', or +.PP +.B scanin +.RB \fB\-c\fR\ [options]\ input.tif\ recogin.cht\ scanprofile.[icc|mpp]\ pbase\ [diag.tif] +.IP +:\- inputs pbase.ti2 and outputs printer pbase.ti3, or +.PP +.B scanin +.RB \fB\-r\fR\ [options]\ input.tif\ recogin.cht\ pbase\ [diag.tif] +.IP +:\- inputs pbase.ti2+.ti3 and outputs pbase.ti3 +.TP +\fB\-g\fR +Generate a chart reference (.cht) file +.TP +\fB\-o\fR +Output patch values in .val file +.TP +\fB\-c\fR +Use image to measure color to convert printer pbase .ti2 to .ti3 +.TP +\fB\-ca\fR +Same as \fB\-c\fR, but accumulates more values to pbase .ti3 +from subsequent pages +.TP +\fB\-r\fR +Replace device values in pbase .ti2/.ti3 +Default is to create a scanner .ti3 file +.TP +\fB\-F\fR x1,y1,x2,y2,x3,y3,x4,y4 +Don't auto recognize, locate using four fiducual marks +.TP +\fB\-p\fR +Compensate for perspective distortion +.TP +\fB\-a\fR +Recognise chart in normal orientation only (\fB\-A\fR fallback as is) +Default is to recognise all possible chart angles +.TP +\fB\-m\fR +Return true mean (default is robust mean) +.TP +\fB\-G\fR gamma +Approximate gamma encoding of image +.TP +\fB\-v\fR [n] +Verbosity level 0\-9 +.TP +\fB\-d\fR [ihvglLIcrsonap] +Generate diagnostic output (try \fB\-dipn\fR) +.TP +i +diag \- B&W of input image +.TP +h +diag \- Horizontal edge/tick detection +.TP +v +diag \- Vertical edge/tick detection +.TP +g +diag \- Groups detected +.TP +l +diag \- Lines detected +.TP +L +diag \- All lines detected +.TP +I +diag \- lines used to improve fit +.TP +c +diag \- lines perspective corrected +.TP +r +diag \- lines rotated +.TP +s +diag \- diagnostic sample boxes rotated +.TP +o +diag \- sample box outlines +.TP +n +diag \- sample box names +.TP +a +diag \- sample box areas +.TP +p +diag \- pixel areas sampled +.HP +\fB\-O\fR outputfile Override the default output filename & extension. diff --git a/debian/man/spec2cie.1 b/debian/man/spec2cie.1 new file mode 100644 index 0000000..79f23b7 --- /dev/null +++ b/debian/man/spec2cie.1 @@ -0,0 +1,47 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH CONVERT "1" "September 2014" "spec2cie" "User Commands" +.SH NAME +Convert \- Convert spectral .ti3 file. +.SH SYNOPSIS +.B spec2cie +[\fIoptions\fR] \fIinput.ti3 output.ti3\fR +.SH DESCRIPTION +Convert spectral .ti3 file, Version 1.6.3 +.SH SYNOPSIS +.B spec2cie +.RB [options]\ input.ti3\ output.ti3 +.TP +\fB\-v\fR +Verbose mode +.TP +\fB\-I\fR illum +Override actual instrument illuminant in .ti3 file: +.IP +A, C, D50, D50M2, D65, F5, F8, F10 or file.sp +(only used in conjunction with \fB\-f\fR) +.TP +\fB\-f\fR [illum] +Use Fluorescent Whitening Agent compensation [simulated inst. illum.: +.IP +M0, M1, M2, A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp] +.TP +\fB\-i\fR illum +Choose illuminant for computation of CIE XYZ from spectral data & FWA: +A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp +.TP +\fB\-o\fR observ +Choose CIE Observer for spectral data: +.IP +1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2 +.TP +\fB\-n\fR +Don't output spectral values +.TP +\fB\-p\fR +Plot each values spectrum +.TP +input.ti3 +Measurement file +.TP +output.ti3 +Converted measurement file diff --git a/debian/man/specplot.1 b/debian/man/specplot.1 new file mode 100644 index 0000000..d4426f3 --- /dev/null +++ b/debian/man/specplot.1 @@ -0,0 +1,28 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH PLOT "1" "September 2014" "specplot" "User Commands" +.SH NAME +Plot \- Plot spectrum and calculate CCT and VCT. +.SH DESCRIPTION +Plot spectrum and calculate CCT and VCT +.SH SYNOPSIS +.B specplot +.RB [infile.sp] +.TP +\fB\-v\fR +verbose +.TP +\fB\-c\fR +combine multiple files into one plot +.TP +\fB\-z\fR +don't make range cover zero +.TP +\fB\-u\fR level +plot effect of adding estimated UV level +.TP +\fB\-U\fR +plot effect of adding range of estimated UV level +.TP +[infile.sp ...] +spectrum files to plot +default is all built in illuminants diff --git a/debian/man/splitti3.1 b/debian/man/splitti3.1 new file mode 100644 index 0000000..4be8b4e --- /dev/null +++ b/debian/man/splitti3.1 @@ -0,0 +1,33 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH SPLIT "1" "September 2014" "splitcgats" "User Commands" +.SH NAME +Split \- Split a .ti3 into two. +.SH DESCRIPTION +Split a .ti3 into two, Version 1.6.3 +.SH SYNOPSIS +.B splitcgats +.RB [\-options]\ input.ti3\ output1.ti3\ output2.ti3 +.TP +\fB\-v\fR +Verbose \- print each patch value +.TP +\fB\-n\fR no +Put no sets in first file, and balance in second file. +.TP +\fB\-p\fR percent +Put percent% sets in first file, and balance in second file. (def. 50%) +.TP +\fB\-w\fR +Put white patches in both files. +.TP +\fB\-r\fR seed +Use given random seed. +.TP +input.ti3 +File to be split up. +.TP +output1.ti3 +First output file +.TP +output2.ti3 +Second output file diff --git a/debian/man/spotread.1 b/debian/man/spotread.1 new file mode 100644 index 0000000..050f708 --- /dev/null +++ b/debian/man/spotread.1 @@ -0,0 +1,123 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH MEASURE "1" "September 2014" "spotread" "User Commands" +.SH NAME +Measure \- Read Print Spot values. +.SH DESCRIPTION +Measure spot values, Version 1.6.3 +.SH SYNOPSIS +.B spotread +.RB [\-options]\ [logfile] +.TP +\fB\-v\fR +Verbose mode +.TP +\fB\-s\fR +Print spectrum for each reading +.TP +\fB\-S\fR +Plot spectrum for each reading +.TP +\fB\-c\fR listno +Set communication port from the following list (default 1) +.IP +** No ports found ** +.TP +\fB\-t\fR +Use transmission measurement mode +.TP +\fB\-e\fR +Use emissive measurement mode (absolute results) +.TP +\fB\-eb\fR +Use display white brightness relative measurement mode +.TP +\fB\-ew\fR +Use display white point relative chromatically adjusted mode +.TP +\fB\-p\fR +Use telephoto measurement mode (absolute results) +.TP +\fB\-pb\fR +Use projector white brightness relative measurement mode +.TP +\fB\-pw\fR +Use projector white point relative chromatically adjusted mode +.TP +\fB\-a\fR +Use ambient measurement mode (absolute results) +.TP +\fB\-f\fR +Use ambient flash measurement mode (absolute results) +.TP +\fB\-I\fR illum +Set simulated instrument illumination using FWA (def \fB\-i\fR illum): +M0, M1, M2, A, C, D50, D50M2, D65, F5, F8, F10 or file.sp] +.TP +\fB\-i\fR illum +Choose illuminant for computation of CIE XYZ from spectral data & FWA: +A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp +.TP +\fB\-Q\fR observ +Choose CIE Observer for spectral data or CCSS instrument: +1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2 +(Choose FWA during operation) +.TP +\fB\-F\fR filter +Set filter configuration (if aplicable): +.TP +n +None +.TP +p +Polarising filter +.TP +6 +D65 +.TP +u +U.V. Cut +.TP +\fB\-E\fR extrafilterfile +Apply extra filter compensation file +.TP +\fB\-x\fR +Display Yxy instead of Lab +.TP +\fB\-h\fR +Display LCh instead of Lab +.TP +\fB\-V\fR +Show running average and std. devation from ref. +.TP +\fB\-T\fR +Display correlated color temperatures and CRI +.TP +\fB\-N\fR +Disable auto calibration of instrument +.TP +\fB\-H\fR +Start in high resolution spectrum mode (if available) +.TP +\fB\-X\fR file.ccmx +Apply Colorimeter Correction Matrix +.TP +\fB\-X\fR file.ccss +Use Colorimeter Calibration Spectral Samples for calibration +.TP +\fB\-Y\fR r|n +Override refresh, non\-refresh display mode +.TP +\fB\-Y\fR R:rate +Override measured refresh rate with rate Hz +.TP +\fB\-Y\fR A +Use non\-adaptive integration time mode (if available). +.TP +\fB\-W\fR n|h|x +Override serial port flow control: n = none, h = HW, x = Xon/Xoff +.TP +\fB\-D\fR [level] +Print debug diagnostics to stderr +.TP +logfile +Optional file to save reading results as text diff --git a/debian/man/synthcal.1 b/debian/man/synthcal.1 new file mode 100644 index 0000000..5fce9da --- /dev/null +++ b/debian/man/synthcal.1 @@ -0,0 +1,47 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH CREATE "1" "September 2014" "synthcal" "User Commands" +.SH NAME +Create \- Create a synthetic calibration file. +.SH DESCRIPTION +Create a synthetic calibration file, Version 1.6.3 +.SH SYNOPSIS +.B synthcal +.RB [\-options]\ outfile +.TP +\fB\-t\fR N +i = input, o = output, d = display (default) +.TP +\fB\-d\fR col_comb +choose colorant combination from the following (default 3): +0: Print grey +1: Video grey +2: Print RGB +3: Video RGB +4: CMYK +5: CMY +6: CMYK + Light CM +7: CMYK + Light CMK +8: CMYK + Red + Blue +9: CMYK + Orange + Green +10: CMYK + Light CMK + Light Light K +11: CMYK + Orange + Green + Light CM +12: CMYK + Light CM + Medium CM +.TP +\fB\-D\fR colorant +Add or delete colorant from combination: +(Use \-?? to list known colorants) +.TP +\fB\-o\fR o1,o2,o3, +Set non\-linear curve offset (default 0.0) +.TP +\fB\-s\fR s1,s2,s3, +Set non\-linear curve scale (default 1.0) +.TP +\fB\-p\fR p1,p2,p3, +Set non\-linear curve powers (default 1.0) +.TP +\fB\-E\fR description +Set the profile dEscription string +.TP +outfile +Base name for output .cal file diff --git a/debian/man/synthread.1 b/debian/man/synthread.1 new file mode 100644 index 0000000..9a52806 --- /dev/null +++ b/debian/man/synthread.1 @@ -0,0 +1,45 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH SYNTHETIC "1" "September 2014" "synthread" "User Commands" +.SH NAME +Synthetic \- Synthetic device model test chart reader. +.SH DESCRIPTION +Synthetic device model test chart reader \- Version 1.6.3 +.SH SYNOPSIS +.B synthread +.RB [\-v]\ [\-s]\ [separation.icm]\ profile.[icc|mpp|ti3]\ outfile +.TP +\fB\-v\fR +Verbose mode +.TP +\fB\-p\fR +Use separation profile +.TP +\fB\-l\fR +Construct and output in Lab rather than XYZ +.TP +\fB\-i\fR p1,p2,p3, +Set input channel curve powers (default 1.0) +.TP +\fB\-k\fR x1:y1,x2:y2,x3:y2 +Set input channel inflection points (default 0.5,0.5) +.TP +\fB\-o\fR p1,p2,p3, +Set output channel curve powers (default 1.0) +.TP +\fB\-r\fR level +Add average random deviation of <level>% to input device values (after sep.) +.TP +\fB\-R\fR level +Add average random deviation of <level>% to output PCS values +.TP +\fB\-u\fR +Make random deviations have uniform distributions rather than normal +.TP +\fB\-b\fR L,a,b +Scale black point to target Lab value +.TP +[separation.icm] +Device link separation profile +.IP +profile.[icc|mpp|ti3] ICC, MPP profile or TI3 to use +outfile Base name for input[ti1]/output[ti3] file diff --git a/debian/man/targen.1 b/debian/man/targen.1 new file mode 100644 index 0000000..6ad7229 --- /dev/null +++ b/debian/man/targen.1 @@ -0,0 +1,112 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH GENERATE "1" "September 2014" "targen" "User Commands" +.SH NAME +Generate \- Generate Target deviceb test chart color values. +.SH DESCRIPTION +Generate Target deviceb test chart color values, Version 1.6.3 +.SH SYNOPSIS +.B targen +.RB [options]\ outfile +.TP +\fB\-v\fR [level] +Verbose mode [optional level 1..N] +.TP +\fB\-d\fR col_comb +choose colorant combination from the following: +0: Print grey +1: Video grey +2: Print RGB +3: Video RGB +4: CMYK +5: CMY +6: CMYK + Light CM +7: CMYK + Light CMK +8: CMYK + Red + Blue +9: CMYK + Orange + Green +10: CMYK + Light CMK + Light Light K +11: CMYK + Orange + Green + Light CM +12: CMYK + Light CM + Medium CM +.TP +\fB\-D\fR colorant +Add or delete colorant from combination: +(Use \-?? to list known colorants) +.TP +\fB\-G\fR +Generate good optimized points rather than Fast +.TP +\fB\-e\fR patches +White test patches (default 4) +.TP +\fB\-B\fR patches +Black test patches (default 4 Grey/RGB, else 0) +.TP +\fB\-s\fR steps +Single channel steps (default grey 50, color 0) +.TP +\fB\-g\fR steps +Grey axis RGB or CMY steps (default 0) +.TP +\fB\-m\fR steps +Multidimensional device space cube steps (default 0) +.TP +\fB\-b\fR steps +Multidimensional body centered cubic steps (default 0) +.TP +\fB\-f\fR patches +Add iterative & adaptive full spread patches to total (default grey 0, color 836) +Default is Optimised Farthest Point Sampling (OFPS) +.TP +\fB\-t\fR +Use incremental far point for full spread +.TP +\fB\-r\fR +Use device space random for full spread +.TP +\fB\-R\fR +Use perceptual space random for full spread +.TP +\fB\-q\fR +Use device space\-filling quasi\-random for full spread +.TP +\fB\-Q\fR +Use perceptual space\-filling quasi\-random for full spread +.TP +\fB\-i\fR +Use device space body centered cubic grid for full spread +.TP +\fB\-I\fR +Use perceptual space body centered cubic grid for full spread +.TP +\fB\-a\fR angle +Simplex grid angle 0.0 \- 0.5 for B.C.C. grid, default 0.333300 +.TP +\fB\-A\fR adaptation +Degree of adaptation of OFPS 0.0 \- 1.0 (default 0.1, \fB\-c\fR profile used 1.0) +.TP +\fB\-l\fR ilimit +Total ink limit in % (default = none) +.TP +\fB\-p\fR power +Optional power\-like value applied to all device values. +.TP +\fB\-c\fR profile +Optional device ICC or MPP pre\-conditioning profile filename +(Use "none" to turn off any conditioning) +.TP +\fB\-N\fR nemphasis +Degree of neutral axis patch concentration 0.0\-1.0 (default 0.50) +.TP +\fB\-V\fR demphasis +Degree of dark region patch concentration 1.0\-4.0 (default 1.00 = none) +.TP +\fB\-F\fR L,a,b,rad +Filter out samples outside Lab sphere. +.TP +\fB\-w\fR +Dump diagnostic outfilel.wrl file (Lab locations) +.TP +\fB\-W\fR +Dump diagnostic outfiled.wrl file (Device locations) +.TP +outfile +Base name for output(.ti1) diff --git a/debian/man/tiffgamut.1 b/debian/man/tiffgamut.1 new file mode 100644 index 0000000..760c72f --- /dev/null +++ b/debian/man/tiffgamut.1 @@ -0,0 +1,90 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH CREATE "1" "September 2014" "tiffgamut" "User Commands" +.SH NAME +Create \- Create VRML image of the gamut surface of a TIFF. +.SH DESCRIPTION +Create VRML image of the gamut surface of a TIFF or JPEG, Version 1.6.3 +.SH SYNOPSIS +.B tiffgamut +.RB [\-v\ level]\ [profile.icm\ |\ embedded.tif/jpg]\ infile1.tif/jpg\ [infile2.tif/jpg\ ...] +.TP +\fB\-v\fR +Verbose +.TP +\fB\-d\fR sres +Surface resolution details 1.0 \- 50.0 +.TP +\fB\-w\fR +emit VRML .wrl file as well as CGATS .gam file +.TP +\fB\-n\fR +Don't add VRML axes or white/black point +.TP +\fB\-k\fR +Add markers for prim. & sec. "cusp" points +.TP +\fB\-f\fR perc +Filter by popularity, perc = percent to use +.TP +\fB\-i\fR intent +p = perceptual, r = relative colorimetric, +s = saturation, a = absolute (default), d = profile default +.TP +\fB\-p\fR oride +l = Lab_PCS (default), j = CIECAM02 Appearance Jab +.TP +\fB\-o\fR order +n = normal (priority: lut > matrix > monochrome) +r = reverse (priority: monochrome > matrix > lut) +.TP +\fB\-c\fR viewcond +set appearance mode and viewing conditions for CIECAM02, +either an enumerated choice, or a parameter:value changes +.IP +pp \- Practical Reflection Print (ISO\-3664 P2) +pe \- Print evaluation environment (CIE 116\-1995) +pc \- Critical print evaluation environment (ISO\-3664 P1) +mt \- Monitor in typical work environment +mb \- Bright monitor in bright work environment +md \- Monitor in darkened work environment +jm \- Projector in dim environment +jd \- Projector in dark environment +tv \- Television/Film Studio +.IP +pcd \- Photo CD \- original scene outdoors +.IP +ob \- Original scene \- Bright Outdoors +cx \- Cut Sheet Transparencies on a viewing box +.TP +s:surround +n = auto, a = average, m = dim, d = dark, +c = transparency (default average) +.TP +w:X:Y:Z +Adapted white point as XYZ (default media white) +.TP +w:x:y +Adapted white point as x, y +.TP +a:adaptation +Adaptation luminance in cd.m^2 (default 50.0) +.TP +b:background +Background % of image luminance (default 20) +.TP +l:imagewhite +Image white in cd.m^2 if surround = auto (default 250) +.TP +f:flare +Flare light % of image luminance (default 0) +.TP +g:glare +Flare light % of ambient (default 1) +.TP +g:X:Y:Z +Flare color as XYZ (default media white, Abs: D50) +.TP +g:x:y +Flare color as x, y +.HP +\fB\-O\fR outputfile Override the default output filename. diff --git a/debian/man/timage.1 b/debian/man/timage.1 new file mode 100644 index 0000000..2ac441a --- /dev/null +++ b/debian/man/timage.1 @@ -0,0 +1,33 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH CREATE "1" "September 2014" "timage" "User Commands" +.SH NAME +Create \- Create test images, default hex RGB surface and wedge. +.SH DESCRIPTION +Create test images, default hex RGB surface and wedge, Version 1.6.3 +.SH SYNOPSIS +.B timage +.RB [\-options]\ outfile.tif +.TP +\fB\-t\fR +Generate rectangular gamut boundary test chart +.TP +\fB\-p\fR steps +Generate a colorspace step chart with L* steps^2 +.TP +\fB\-r\fR res +Resolution in DPI (default 200) +.TP +\fB\-s\fR +Smooth blend +.TP +\fB\-x\fR +16 bit output +.TP +\fB\-4\fR +CMYK output +.TP +\fB\-g\fR prop +Percentage towards grey (default 0%) +.TP +outfile.tif +Profile to check against diff --git a/debian/man/txt2ti3.1 b/debian/man/txt2ti3.1 new file mode 100644 index 0000000..f0c44c4 --- /dev/null +++ b/debian/man/txt2ti3.1 @@ -0,0 +1,33 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH CONVERT "1" "September 2014" "txt2ti3" "User Commands" +.SH NAME +Convert \- Convert Gretag/Logo or X-Rite ColorPport raw RGB or CMYK device profile data to Argyll CGATS data. +.SH DESCRIPTION +Convert Gretag/Logo or X\-Rite ColorPport raw RGB or CMYK device profile data to Argyll CGATS data, Version 1.6.3 +.SH SYNOPSIS +.B txt2ti3 +.RB [\-v]\ [\-l\ limit]\ [devfile]\ infile\ [specfile]\ outbase +.TP +\fB\-2\fR +Create dummy .ti2 file as well +.TP +\fB\-l\fR limit +set ink limit, 0 \- 400% (default max in file) +.TP +\fB\-d\fR +Set type of device as Display, not Output +.TP +\fB\-i\fR +Set type of device as Input, not Output +.TP +[devfile] +Input Device CMYK target file (typically file.txt) +.TP +infile +Input CIE, Spectral or Device & Spectral file (typically file.txt) +.TP +[specfile] +Input Spectral file (typically file.txt) +.TP +outbasename +Output file basename for .ti3 and .ti2 diff --git a/debian/man/viewgam.1 b/debian/man/viewgam.1 new file mode 100644 index 0000000..83afd63 --- /dev/null +++ b/debian/man/viewgam.1 @@ -0,0 +1,42 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH VIEW "1" "September 2014" "viewgam" "User Commands" +.SH NAME +View \- View gamuts. +.SH DESCRIPTION +View gamuts Version 1.6.3 +.SH SYNOPSIS +.B viewgam +.RB { [\-c\ color]\ [\-t\ trans]\ [\-w|s]\ infile.gam }\ ...\ outfile.wrl +.TP +\fB\-c\fR color +Color to make gamut, r = red, g = green, b = blue +c = cyan, m = magenta, y = yellow, e = grey, w = white +n = natural color +.TP +\fB\-t\fR trans +Set transparency from 0.0 (opaque) to 1.0 (invisible) +.TP +\fB\-w\fR +Show as a wireframe +.TP +\fB\-s\fR +Show as a solid surace +.TP +infile.gam +Name of .gam file +Repeat above for each input file +.TP +\fB\-n\fR +Don't add Lab axes +.TP +\fB\-k\fR +Add markers for prim. & sec. "cusp" points +.TP +\fB\-i\fR +Compute and print intersecting volume of first 2 gamuts +.TP +\fB\-I\fR isect.gam +Same as \fB\-i\fR, but save intersection gamut to isect.gam +.TP +outfile.wrl +Name of output .wrl file diff --git a/debian/man/xicclu.1 b/debian/man/xicclu.1 new file mode 100644 index 0000000..b5aa7e9 --- /dev/null +++ b/debian/man/xicclu.1 @@ -0,0 +1,162 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. +.TH LOOKUP "1" "September 2014" "xicclu" "User Commands" +.SH NAME +Lookup \- Translate colors through an xicc. +.SH DESCRIPTION +Lookup ICC or CAL colors, Version 1.6.3 +.SH SYNOPSIS +.B xicclu +.RB [\-options]\ profile_or_cal +.TP +\fB\-v\fR level +Verbosity level 0 \- 2 (default = 1) +.TP +\fB\-g\fR +Plot slice instead of looking colors up. (Default white to black) +.TP +\fB\-G\fR s:L:a:b +Override plot slice start with Lab or Jab co\-ordinate +.TP +\fB\-G\fR e:L:a:b +Override plot slice end with Lab or Jab co\-ordinate +.TP +\fB\-f\fR function +f = forward, b = backwards, g = gamut, p = preview +if = inverted forward, ib = inverted backwards +.TP +\fB\-i\fR intent +a = absolute, r = relative colorimetric +p = perceptual, s = saturation +.TP +\fB\-o\fR order +n = normal (priority: lut > matrix > monochrome) +r = reverse (priority: monochrome > matrix > lut) +.TP +\fB\-p\fR oride +x = XYZ_PCS, X = XYZ * 100, l = Lab_PCS, L = LCh, y = Yxy +j = CIECAM02 Appearance Jab, J = CIECAM02 Appearance JCh +.TP +\fB\-s\fR scale +Scale device range 0.0 \- scale rather than 0.0 \- 1.0 +.TP +\fB\-e\fR flag +Video encode device input as: +.TP +\fB\-E\fR flag +Video decode device output as: +.TP +n +normal 0..1 full range RGB levels (default) +.TP +t +(16\-235)/255 "TV" RGB levels +.TP +6 +Rec601 YCbCr SD (16\-235,240)/255 "TV" levels +.TP +7 +Rec709 1125/60Hz YCbCr HD (16\-235,240)/255 "TV" levels +.TP +5 +Rec709 1250/50Hz YCbCr HD (16\-235,240)/255 "TV" levels +.TP +2 +Rec2020 YCbCr UHD (16\-235,240)/255 "TV" levels +.TP +C +Rec2020 Constant Luminance YCbCr UHD (16\-235,240)/255 "TV" levels +.TP +\fB\-k\fR [zhxrlv] +Black value target: z = zero K, +h = 0.5 K, x = max K, r = ramp K (def.) +l = extra PCS input is portion of K locus +v = extra PCS input is K target value +.HP +\fB\-k\fR p stle stpo enpo enle shape +.IP +stle: K level at White 0.0 \- 1.0 +stpo: start point of transition Wh 0.0 \- Bk 1.0 +enpo: End point of transition Wh 0.0 \- Bk 1.0 +enle: K level at Black 0.0 \- 1.0 +shape: 1.0 = straight, 0.0\-1.0 concave, 1.0\-2.0 convex +.HP +\fB\-k\fR q stle0 stpo0 enpo0 enle0 shape0 stle2 stpo2 enpo2 enle2 shape2 +.IP +Transfer extra PCS input to dual curve limits +.TP +\fB\-K\fR parameters +Same as \fB\-k\fR, but target is K locus rather than K value itself +.TP +\fB\-l\fR tlimit +set total ink limit, 0 \- 400% (estimate by default) +.TP +\fB\-L\fR klimit +set black ink limit, 0 \- 100% (estimate by default) +.TP +\fB\-a\fR +show actual target values if clipped +.TP +\fB\-u\fR +warn if output PCS is outside the spectrum locus +.TP +\fB\-m\fR +merge output processing into clut +.TP +\fB\-b\fR +use CAM Jab for clipping +.TP +\fB\-c\fR viewcond +set viewing conditions for CIECAM97s, +either an enumerated choice, or a parameter:value changes +.IP +pp \- Practical Reflection Print (ISO\-3664 P2) +pe \- Print evaluation environment (CIE 116\-1995) +pc \- Critical print evaluation environment (ISO\-3664 P1) +mt \- Monitor in typical work environment +mb \- Bright monitor in bright work environment +md \- Monitor in darkened work environment +jm \- Projector in dim environment +jd \- Projector in dark environment +tv \- Television/Film Studio +.IP +pcd \- Photo CD \- original scene outdoors +.IP +ob \- Original scene \- Bright Outdoors +cx \- Cut Sheet Transparencies on a viewing box +.TP +s:surround +n = auto, a = average, m = dim, d = dark, +c = transparency (default average) +.TP +w:X:Y:Z +Adapted white point as XYZ (default media white, Abs: D50) +.TP +w:x:y +Adapted white point as x, y +.TP +a:adaptation +Adaptation luminance in cd.m^2 (default 50.0) +.TP +b:background +Background % of image luminance (default 20) +.TP +l:imagewhite +Image white in cd.m^2 if surround = auto (default 250) +.TP +f:flare +Flare light % of image luminance (default 0) +.TP +g:glare +Flare light % of ambient (default 1) +.TP +g:X:Y:Z +Flare color as XYZ (default media white, Abs: D50) +.TP +g:x:y +Flare color as x, y +.IP +The colors to be translated should be fed into standard in, +one input color per line, white space separated. +A line starting with a # will be ignored. +A line not starting with a number will terminate the program. +Use \fB\-v0\fR for just output colors. diff --git a/debian/missing-sources/deep_arrays.json b/debian/missing-sources/deep_arrays.json new file mode 100644 index 0000000..3e1c094 --- /dev/null +++ b/debian/missing-sources/deep_arrays.json @@ -0,0 +1,18 @@ +[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[ +[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[ +[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[ +[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[ +[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[ +[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[ +[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[ +[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[ +[[[[[[[[[[[[[[[[ +]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]] +]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]] +]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]] +]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]] +]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]] +]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]] +]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]] +]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]] +]]]]]]]]]]]]]]]]
\ No newline at end of file diff --git a/debian/missing-sources/difficult_json_c_test_case.json b/debian/missing-sources/difficult_json_c_test_case.json new file mode 100644 index 0000000..d2bf5ea --- /dev/null +++ b/debian/missing-sources/difficult_json_c_test_case.json @@ -0,0 +1,7 @@ +{ "glossary": + { "title": "example glossary", "GlossDiv": + { "title": "S", "GlossList": + [{ "ID": "SGML", "SortAs": "SGML", "GlossTerm": "Standard Generalized Markup Language", "Acronym": "SGML", "Abbrev": "ISO 8879:1986", "GlossDef": "A meta-markup language, used to create markup languages such as DocBook.", "GlossSeeAlso": ["GML", "XML", "markup"] } ] + } + } +} diff --git a/debian/missing-sources/difficult_json_c_test_case_with_comments.json b/debian/missing-sources/difficult_json_c_test_case_with_comments.json new file mode 100644 index 0000000..189dca8 --- /dev/null +++ b/debian/missing-sources/difficult_json_c_test_case_with_comments.json @@ -0,0 +1,7 @@ +{ "glossary": + { /* you */ "title": /**/ "example glossary", /*should*/"GlossDiv": + { "title": /*never*/"S", /*ever*/"GlossList": + [ { "ID": "SGML", "SortAs": "SGML", "GlossTerm": "Standard Generalized Markup Language", "Acronym": "SGML", "Abbrev": "ISO 8879:1986", "GlossDef": "A meta-markup language, used to create markup languages such as DocBook.", /*see*/"GlossSeeAlso"/*this*/:/*coming*/[/*out*/"GML"/*of*/,/*the*/"XML"/*parser!*/, "markup"] /*hey*/}/*ho*/]/*hey*/ + }/*ho*/ + } +} // and the parser won't even get this far, so chill. /* hah! diff --git a/debian/missing-sources/non_utf8_char_in_string.json b/debian/missing-sources/non_utf8_char_in_string.json new file mode 100644 index 0000000..7d75519 --- /dev/null +++ b/debian/missing-sources/non_utf8_char_in_string.json @@ -0,0 +1,88 @@ +{ + "CoreletAPIVersion":2, + "CoreletType":"standalone", + "documentation":"A corelet that provides the capability to upload a folder’s contents into a user’s locker.", + "functions": + [ + { + "documentation":"Displays a dialog box that allows user to select a folder on the local system.", + "name":"ShowBrowseDialog","parameters": + [ + { + "documentation":"The callback function for results.", + "name":"callback", + "required":true, + "type":"callback" + } + ] + }, + { + "documentation":"Uploads all mp3 files in the folder provided.", + "name":"UploadFolder","parameters": + [ + { + "documentation":"The path to upload mp3 files from.", + "name":"path", + "required":true, + "type":"string" + }, + { + "documentation":"The callback function for progress.", + "name":"callback", + "required":true, + "type":"callback" + } + ] + }, + { + "documentation":"Returns the server name to the current locker service.", + "name":"GetLockerService", + "parameters":[] + }, + { + "documentation":"Changes the name of the locker service.", + "name":"SetLockerService", + "parameters": + [ + { + "documentation":"The value of the locker service to set active.", + "name":"LockerService", + "required":true, + "type":"string" + } + ] + }, + { + "documentation":"Downloads locker files to the suggested folder.", + "name":"DownloadFile", + "parameters": + [ + { + "documentation":"The origin path of the locker file.", + "name":"path", + "required":true, + "type":"string" + }, + { + "documentation":"The Window destination path of the locker file.", + "name":"destination", + "required":true,"type":"integer" + }, + { + "documentation":"The callback function for progress.", + "name":"callback", + "required":true, + "type":"callback" + } + ] + } + ], + "name":"LockerUploader", + "version": + { + "major":0, + "micro":1, + "minor":0 + }, + "versionString":"0.0.1" +}
\ No newline at end of file diff --git a/debian/patches/100_spelling.patch b/debian/patches/100_spelling.patch new file mode 100644 index 0000000..6ec2078 --- /dev/null +++ b/debian/patches/100_spelling.patch @@ -0,0 +1,616 @@ +Description: correct some typos +Author: Jörg Frings-Fürst <debian@jff-webhosting.net> +Last-Update: 2015-08-23 +--- +This patch header follows DEP-3: http://dep.debian.net/deps/dep3/ +Index: trunk/spectro/dispcal.c +=================================================================== +--- trunk.orig/spectro/dispcal.c ++++ trunk/spectro/dispcal.c +@@ -1937,7 +1937,7 @@ int main(int argc, char *argv[]) { + /* Serial port flow control */ + } else if (argv[fa][1] == 'W') { + fa = nfa; +- if (na == NULL) usage(0,"Paramater expected following -W"); ++ if (na == NULL) usage(0,"Parameter expected following -W"); + if (na[0] == 'n' || na[0] == 'N') + fc = fc_none; + else if (na[0] == 'h' || na[0] == 'H') +@@ -1960,13 +1960,13 @@ int main(int argc, char *argv[]) { + /* Black point correction amount */ + } else if (argv[fa][1] == 'k') { + fa = nfa; +- if (na == NULL) usage(0,"Paramater expected following -k"); ++ if (na == NULL) usage(0,"Parameter expected following -k"); + bkcorrect = atof(na); + if (bkcorrect < 0.0 || bkcorrect > 1.0) usage(0,"-k parameter must be between 0.0 and 1.0"); + /* Neutral blend rate (power) */ + } else if (argv[fa][1] == 'A') { + fa = nfa; +- if (na == NULL) usage(0,"Paramater expected following -A"); ++ if (na == NULL) usage(0,"Parameter expected following -A"); + x.nbrate = atof(na); + if (x.nbrate < 0.05 || x.nbrate > 20.0) usage(0,"-A parameter must be between 0.05 and 20.0"); + /* Black brightness */ +@@ -1999,7 +1999,7 @@ int main(int argc, char *argv[]) { + /* COM port */ + } else if (argv[fa][1] == 'c') { + fa = nfa; +- if (na == NULL) usage(0,"Paramater expected following -c"); ++ if (na == NULL) usage(0,"Parameter expected following -c"); + comport = atoi(na); + if (comport < 1 || comport > 50) usage(0,"-c parameter %d out of range",comport); + +@@ -3063,7 +3063,7 @@ int main(int argc, char *argv[]) { + /* Black level adjustment */ + /* Due to the possibility of the channel offsets not being even, */ + /* we use the largest of the XYZ values after they have been */ +- /* scaled to be even acording to the white XYZ balance. */ ++ /* scaled to be even according to the white XYZ balance. */ + /* It's safer to set the black level a bit low, and then the */ + /* calibration curves can bump the low ones up. */ + if (c == '1') { +Index: trunk/spectro/spotread.c +=================================================================== +--- trunk.orig/spectro/spotread.c ++++ trunk/spectro/spotread.c +@@ -483,7 +483,7 @@ int main(int argc, char *argv[]) { + /* COM port */ + } else if (argv[fa][1] == 'c') { + fa = nfa; +- if (na == NULL) usage("Paramater expected following -c"); ++ if (na == NULL) usage("Parameter expected following -c"); + { + comport = atoi(na); + if (comport < 1 || comport > 40) usage("-c parameter %d out of range",comport); +@@ -492,7 +492,7 @@ int main(int argc, char *argv[]) { + /* Display type */ + } else if (argv[fa][1] == 'y') { + fa = nfa; +- if (na == NULL) usage("Paramater expected following -y"); ++ if (na == NULL) usage("Parameter expected following -y"); + dtype = na[0]; + + #ifndef SALONEINSTLIB +@@ -500,7 +500,7 @@ int main(int argc, char *argv[]) { + } else if (argv[fa][1] == 'I') { + + fa = nfa; +- if (na == NULL) usage("Paramater expected following -I"); ++ if (na == NULL) usage("Parameter expected following -I"); + if (strcmp(na, "A") == 0 + || strcmp(na, "M0") == 0) { + tillum_set = spec = 1; +@@ -539,7 +539,7 @@ int main(int argc, char *argv[]) { + /* Spectral Illuminant type for XYZ computation */ + } else if (argv[fa][1] == 'i') { + fa = nfa; +- if (na == NULL) usage("Paramater expected following -i"); ++ if (na == NULL) usage("Parameter expected following -i"); + if (strcmp(na, "A") == 0) { + illum_set = spec = 1; + illum = icxIT_A; +@@ -579,7 +579,7 @@ int main(int argc, char *argv[]) { + /* Spectral Observer type */ + } else if (argv[fa][1] == 'Q') { + fa = nfa; +- if (na == NULL) usage("Paramater expected following -Q"); ++ if (na == NULL) usage("Parameter expected following -Q"); + if (strcmp(na, "1931_2") == 0) { /* Classic 2 degree */ + obType = icxOT_CIE_1931_2; + } else if (strcmp(na, "1964_10") == 0) { /* Classic 10 degree */ +@@ -657,7 +657,7 @@ int main(int argc, char *argv[]) { + /* Filter configuration */ + } else if (argv[fa][1] == 'F') { + fa = nfa; +- if (na == NULL) usage("Paramater expected following -F"); ++ if (na == NULL) usage("Parameter expected following -F"); + if (na[0] == 'n' || na[0] == 'N') + fe = inst_opt_filter_none; + else if (na[0] == 'p' || na[0] == 'P') +@@ -672,7 +672,7 @@ int main(int argc, char *argv[]) { + /* Extra filter compensation file */ + } else if (argv[fa][1] == 'E') { + fa = nfa; +- if (na == NULL) usage("Paramater expected following -E"); ++ if (na == NULL) usage("Parameter expected following -E"); + strncpy(filtername,na,MAXNAMEL-1); filtername[MAXNAMEL-1] = '\000'; + + /* Show Yxy */ +Index: trunk/spectro/colorhug.c +=================================================================== +--- trunk.orig/spectro/colorhug.c ++++ trunk/spectro/colorhug.c +@@ -212,7 +212,7 @@ colorhug_command(colorhug *p, + + a1logd(p->log,8,"colorhug_command: Read %d bytes and %d read\n",xrbytes,rbytes); + if (rbytes >= 2) { +- a1logd(p->log,6,"colorhug_command: recieved cmd '%s' error '%s' args '%s'\n", ++ a1logd(p->log,6,"colorhug_command: received cmd '%s' error '%s' args '%s'\n", + inst_desc(buf[1]), + colorhug_interp_error((inst *) p, buf[0]), + icoms_tohex(buf, rbytes - 2)); +Index: trunk/spectro/dispwin.c +=================================================================== +--- trunk.orig/spectro/dispwin.c ++++ trunk/spectro/dispwin.c +@@ -2734,7 +2734,7 @@ int dispwin_install_profile(dispwin *p, + + /* Un-Install a display profile */ + /* Return nz if failed, */ +-/* 1 if not sucessfully deleted */ ++/* 1 if not successfully deleted */ + /* 2 if profile not found */ + int dispwin_uninstall_profile(dispwin *p, char *fname, p_scope scope) { + debugr2((errout,"dispwin_uninstall_profile '%s'\n", fname)); +@@ -5128,7 +5128,7 @@ int ddebug /* >0 to print debug sta + p->native = native &= ~2; + } + +- debugr("new_dispwin: return sucessfully\n"); ++ debugr("new_dispwin: return successfully\n"); + return p; + } + +Index: trunk/spectro/dtp51.c +=================================================================== +--- trunk.orig/spectro/dtp51.c ++++ trunk/spectro/dtp51.c +@@ -679,7 +679,7 @@ dtp51_interp_error(inst *pp, int ec) { + case DTP51_INVALID_STEP: + return "Invalid step"; + case DTP51_NO_DATA_AVAILABLE: +- return "No data availble"; ++ return "No data avaialble"; + case DTP51_LAMP_MARGINAL: + return "Lamp marginal"; + case DTP51_LAMP_FAILURE: +Index: trunk/spectro/dtp92.c +=================================================================== +--- trunk.orig/spectro/dtp92.c ++++ trunk/spectro/dtp92.c +@@ -928,7 +928,7 @@ dtp92_interp_error(inst *pp, int ec) { + case DTP92_NO_DATA_AVAILABLE: + return "No data available"; + case DTP92_MISSING_PARAMETER: +- return "Paramter is missing"; ++ return "Parameter is missing"; + case DTP92_CALIBRATION_DENIED: + return "Invalid calibration enable code"; + case DTP92_NEEDS_OFFSET_CAL: +Index: trunk/spectro/hidio.c +=================================================================== +--- trunk.orig/spectro/hidio.c ++++ trunk/spectro/hidio.c +@@ -739,7 +739,7 @@ icoms_hid_read(icoms *p, + { + unsigned char *rbuf2; + +- /* Create a copy of the data recieved with one more byte */ ++ /* Create a copy of the data received with one more byte */ + if ((rbuf2 = malloc(bsize + 1)) == NULL) { + a1loge(p->log, ICOM_SYS, "icoms_hid_read: malloc failed\n"); + return ICOM_SYS; +Index: trunk/spectro/huey.c +=================================================================== +--- trunk.orig/spectro/huey.c ++++ trunk/spectro/huey.c +@@ -81,7 +81,7 @@ static int icoms2huey_err(int se, int to + /* i1Display command codes */ + /* B = byte (8bit), S = short (16bit), W = word (32bit), A = string */ + /* U = unused byte, - = no arguments/results */ +-/* The is a 7 byte command buffer and 6 response recieve buffer. */ ++/* The is a 7 byte command buffer and 6 response receive buffer. */ + /* :2 means the read is from a second 8 byte ep x81 read. */ + /* cbuf[-] is command byte */ + /* rbuf[-2] is continuation byte */ +Index: trunk/spectro/i1pro_imp.c +=================================================================== +--- trunk.orig/spectro/i1pro_imp.c ++++ trunk/spectro/i1pro_imp.c +@@ -3768,7 +3768,7 @@ i1pro_code i1pro_restore_refspot_cal(i1p + return I1PRO_OK; + } + +- /* We've sucessfully restored the dark calibration */ ++ /* We've successfully restored the dark calibration */ + s->dark_valid = 1; + s->ddate = m->caldate; + +@@ -3813,7 +3813,7 @@ i1pro_code i1pro_restore_refspot_cal(i1p + return I1PRO_OK; + } + +- /* We've sucessfully restored the calibration */ ++ /* We've successfully restored the calibration */ + s->cal_valid = 1; + s->cfdate = m->caldate; + +Index: trunk/spectro/madvrwin.c +=================================================================== +--- trunk.orig/spectro/madvrwin.c ++++ trunk/spectro/madvrwin.c +@@ -593,7 +593,7 @@ int ii = 0; + } + #endif + +- debugr("new_madvrwin: return sucessfully\n"); ++ debugr("new_madvrwin: return successfully\n"); + + return p; + } +Index: trunk/spectro/ss.c +=================================================================== +--- trunk.orig/spectro/ss.c ++++ trunk/spectro/ss.c +@@ -1787,7 +1787,7 @@ ss_interp_error(inst *pp, int ec) { + case ss_et_BadHexEncoding: + return "Message received from instrument has bad Hex encoding"; + case ss_et_RecBufferOverun: +- return "Message received from instrument would overflow recieve buffer"; ++ return "Message received from instrument would overflow receive buffer"; + default: + return "Unknown error code"; + } +Index: trunk/spectro/ss_imp.c +=================================================================== +--- trunk.orig/spectro/ss_imp.c ++++ trunk/spectro/ss_imp.c +@@ -216,7 +216,7 @@ static int h2b(ss *p, char c) { + return 0; + } + +-/* Return the first enum from the recieve buffer without removing it. */ ++/* Return the first enum from the receive buffer without removing it. */ + int ss_peek_ans(ss *p) { + int rv; + +Index: trunk/spectro/webwin.c +=================================================================== +--- trunk.orig/spectro/webwin.c ++++ trunk/spectro/webwin.c +@@ -396,7 +396,7 @@ int ddebug /* >0 to print debug sta + msec_sleep(50); + } + +- debugr("new_webwin: return sucessfully\n"); ++ debugr("new_webwin: return successfully\n"); + + return p; + } +Index: trunk/xicc/cv.c +=================================================================== +--- trunk.orig/xicc/cv.c ++++ trunk/xicc/cv.c +@@ -101,7 +101,7 @@ main(int argc, char *argv[]) { + + printf("There are %d parameters:\n",np); fflush(stdout); + for (i = 0; i < np; i++) { +- printf("Paramter %d = %f\n",i, params[i]); fflush(stdout); ++ printf("Parameter %d = %f\n",i, params[i]); fflush(stdout); + } + + /* Display the result */ +Index: trunk/spectro/ss_imp.h +=================================================================== +--- trunk.orig/spectro/ss_imp.h ++++ trunk/spectro/ss_imp.h +@@ -720,7 +720,7 @@ void ss_add_string(struct _ss *p, char * + /* - - - - - - - - - - - - - - - - - - - - - */ + /* ANSWER: */ + +-/* Return the first enum from the recieve buffer without removing it. */ ++/* Return the first enum from the receive buffer without removing it. */ + int ss_peek_ans(struct _ss *p); + + /* Remove a Spectrolino answer enum from the revieve buffer, */ +Index: trunk/imdi/cctiff.c +=================================================================== +--- trunk.orig/imdi/cctiff.c ++++ trunk/imdi/cctiff.c +@@ -36,7 +36,7 @@ + Add flag to ignore inkname mismatches. + + +- Should add support for transfering any extra alpha ++ Should add support for transferring any extra alpha + planes from input to output, rather than simply ignoring them. + + +@@ -1953,11 +1953,11 @@ main(int argc, char *argv[]) { + + if (wh != NULL) { + printf("Output TIFF file '%s'\n",out_name); +- printf("Ouput raster file ICC colorspace is %s\n",icm2str(icmColorSpaceSignature,su.outs)); ++ printf("Output raster file ICC colorspace is %s\n",icm2str(icmColorSpaceSignature,su.outs)); + printf("Output TIFF file photometric is %s\n",Photometric2str(wphotometric)); + } else { + printf("Output JPEG file '%s'\n",out_name); +- printf("Ouput raster file ICC colorspace is %s\n",icm2str(icmColorSpaceSignature,su.outs)); ++ printf("Output raster file ICC colorspace is %s\n",icm2str(icmColorSpaceSignature,su.outs)); + printf("Output JPEG file colorspace is %s\n",JPEG_cspace2str(wj.jpeg_color_space)); + if (wdesc != NULL) + printf("Output raster file description: '%s'\n",wdesc); +Index: trunk/imdi/imdi.h +=================================================================== +--- trunk.orig/imdi/imdi.h ++++ trunk/imdi/imdi.h +@@ -38,7 +38,7 @@ struct _imdi { + + /* Note that once an imdi is created, multiple can call interp() without */ + /* interfering with each other, allowing parallel execution. */ +- void (*interp)(struct _imdi *s, void **outp, int outst, /* Ouput pointers and stride */ ++ void (*interp)(struct _imdi *s, void **outp, int outst, /* Output pointers and stride */ + void **inp, int inst, /* Input pointers and stride */ + unsigned int npixels); /* Number of pixels */ + +Index: trunk/spectro/munki_imp.c +=================================================================== +--- trunk.orig/spectro/munki_imp.c ++++ trunk/spectro/munki_imp.c +@@ -6393,7 +6393,7 @@ munki_code munki_create_hr(munki *p, int + int i, j, jj, k, cx, sx; + munki_fc coeff[40][16]; /* Existing filter cooefficients */ + int nwav1; /* Number of filters */ +- double wl_short1, wl_long1; /* Ouput wavelength of first and last filters */ ++ double wl_short1, wl_long1; /* Output wavelength of first and last filters */ + double wl_step1; + munki_xp xp[41]; /* Crossover points each side of filter */ + munki_code ev = MUNKI_OK; +Index: trunk/target/printtarg.c +=================================================================== +--- trunk.orig/target/printtarg.c ++++ trunk/target/printtarg.c +@@ -2953,7 +2953,7 @@ char *argv[]; + double sscale = 1.0; /* Spacer size scale */ + int rand = 1; + int qbits = 0; /* Quantization bits */ +- int oft = 0; /* Ouput File type, 0 = PS, 1 = EPS , 2 = TIFF */ ++ int oft = 0; /* Output File type, 0 = PS, 1 = EPS , 2 = TIFF */ + int nocups = 0; /* Supress CUPS PS/EPS job ticket */ + depth2d tiffdpth = bpc8_2d; /* TIFF pixel depth */ + double tiffres = 100.0; /* TIFF resolution in DPI */ +Index: trunk/gamut/nearsmth.c +=================================================================== +--- trunk.orig/gamut/nearsmth.c ++++ trunk/gamut/nearsmth.c +@@ -261,7 +261,7 @@ double dxratio /* Depth expansion ratio + double va, vr = 0.0, vl, vd, vv = 0.0; + + /* Absolute, Delta E^2 between test point and destination closest */ +- /* aodv is already positioned acording to the LCh weights, */ ++ /* aodv is already positioned according to the LCh weights, */ + /* so weight as per average of these */ + a_o = w->a.o; + va = wdesq(dtp, aodv, a_o, a_o, a_o, SUM_POW); +@@ -3598,7 +3598,7 @@ static void create_influence_plot(nearsm + swdiag = new_rspl(RSPL_NOFLAGS, 3, 3); /* Allocate 3D -> 3D */ + swdiag->fit_rspl(swdiag, RSPL_NOFLAGS, fpnts, nmpts, NULL, NULL, gres, NULL, NULL, 1.0, avgdev, NULL); + +- /* Now create a plot of the sci_gam with the vertexes colored acording to the */ ++ /* Now create a plot of the sci_gam with the vertexes colored according to the */ + /* diagnostic map. */ + if ((wrl = new_vrml("sci_gam_wt", 1, vrml_lab)) == NULL) { + fprintf(stderr,"gamut map: new_vrml failed for '%s%s'\n","sci_gam_wt",vrm_ext()); +Index: trunk/gamut/nearsmth.h +=================================================================== +--- trunk.orig/gamut/nearsmth.h ++++ trunk/gamut/nearsmth.h +@@ -274,7 +274,7 @@ gammapweights *src1, double wgt1, + gammapweights *src2, double wgt2 + ); + +-/* Tweak weights acording to extra cmy cusp flags or rel override */ ++/* Tweak weights according to extra cmy cusp flags or rel override */ + void tweak_weights(gammapweights out[14], int dst_cmymap, int rel_oride); + + #endif /* NEARSMTH_H */ +Index: trunk/imdi/cctiffo.c +=================================================================== +--- trunk.orig/imdi/cctiffo.c ++++ trunk/imdi/cctiffo.c +@@ -307,7 +307,7 @@ int pmtc + case PHOTOMETRIC_LOGLUV: + return "CIELog2Luv"; + } +- sprintf(buf,"Unknonw Tag %d",pmtc); ++ sprintf(buf,"Unknown Tag %d",pmtc); + return buf; + } + +Index: trunk/imdi/greytiff.c +=================================================================== +--- trunk.orig/imdi/greytiff.c ++++ trunk/imdi/greytiff.c +@@ -132,7 +132,7 @@ int pmtc + case PHOTOMETRIC_LOGLUV: + return "CIELog2Luv"; + } +- sprintf(buf,"Unknonw Tag %d",pmtc); ++ sprintf(buf,"Unknown Tag %d",pmtc); + return buf; + } + +Index: trunk/link/collink.c +=================================================================== +--- trunk.orig/link/collink.c ++++ trunk/link/collink.c +@@ -1138,7 +1138,7 @@ void devip_devop(void *cntx, double *out + } + /* We've got the input profile PCS' at this point. */ + +- /* If we're transfering the K value from the input profile to the */ ++ /* If we're transferring the K value from the input profile to the */ + /* output, copy it into locus[], which will be given to the inverse */ + /* lookup function, else the inverse lookup will generate a K using */ + /* the curve parameters. */ +@@ -1270,7 +1270,7 @@ void devip_devop(void *cntx, double *out + if (p->nhack == 2) { + /* Ideally we would create a 4D PCSK -> PCSK gamut mapping */ + /* to smoothly and accurately cope with the changing source */ +- /* and destination gamuts acording to their degree of "K onlyness". */ ++ /* and destination gamuts according to their degree of "K onlyness". */ + /* In practice we're going to simply interpolated between */ + /* two extremes: unrestricted gamut and K only black gamut. */ + double map0[3], map1[3]; +Index: trunk/profile/printcal.c +=================================================================== +--- trunk.orig/profile/printcal.c ++++ trunk/profile/printcal.c +@@ -1294,7 +1294,7 @@ int main(int argc, char *argv[]) { + icmXYZ2Lab(&wht, wp->Lab, wp->XYZ); + } + +- /* Sort the channel acording to device value */ ++ /* Sort the channel according to device value */ + /* For a consistent result for identical device values, */ + /* secondary sort by inverse CIE value */ + //#define HEAP_COMPARE(A,B) ((A).dev < (B).dev) +Index: trunk/spectro/dispsup.c +=================================================================== +--- trunk.orig/spectro/dispsup.c ++++ trunk/spectro/dispsup.c +@@ -707,7 +707,7 @@ static int disprd_read_imp( + scb->serno = p->serno++; + scb->msec = msec_time(); + +- a1logd(p->log,1, "got reading %f %f %f, transfering to col\n", ++ a1logd(p->log,1, "got reading %f %f %f, transferring to col\n", + val.XYZ[0], val.XYZ[1], val.XYZ[2]); + + scb->mtype = val.mtype; +Index: trunk/gamut/gammap.c +=================================================================== +--- trunk.orig/gamut/gammap.c ++++ trunk/gamut/gammap.c +@@ -775,7 +775,7 @@ gammap *new_gammap( + #endif + if (gmi->bph == gmm_clipBP) { + +- /* Extend the target black point to accomodate the */ ++ /* Extend the target black point to accommodate the */ + /* bent or clipped destination space L* range */ + if (fabp[0] < dr_cs_bp[0]) { + t = (fabp[0] - dr_cs_wp[0])/(dr_cs_bp[0] - dr_cs_wp[0]); +Index: trunk/profile/profout.c +=================================================================== +--- trunk.orig/profile/profout.c ++++ trunk/profile/profout.c +@@ -1048,7 +1048,7 @@ make_output_icc( + if (iccver < icmVersion2_4) { + iccver = icmVersion2_4; /* Need 2.4.0 for Display intents */ + if (verb) +- fprintf(verbo,"Bumped ICC version to 2.4.0 to accomodate multiple Display intents\n"); ++ fprintf(verbo,"Bumped ICC version to 2.4.0 to accommodate multiple Display intents\n"); + } + } + if (wr_icco->set_version(wr_icco, iccver) != 0) +Index: trunk/render/thscreen.c +=================================================================== +--- trunk.orig/render/thscreen.c ++++ trunk/render/thscreen.c +@@ -636,7 +636,7 @@ thscreen *new_thscreen( + mrang = 65535.0/(t->oelev - 1.0); + DBG(("new_thscreen() raw modulation rande = %f\n",mrang)); + +- /* Modify the modulation range to accomodate any level overlap */ ++ /* Modify the modulation range to accommodate any level overlap */ + if (olap > 0.0 && t->oelev > 2) { + mrang = ((t->oelev - 2.0) * olap * mrang + 65535.0)/(t->oelev - 1.0); + DBG(("new_thscreen() modulation adjusted for overlap = %f\n",mrang)); +Index: trunk/xicc/xspect.c +=================================================================== +--- trunk.orig/xicc/xspect.c ++++ trunk/xicc/xspect.c +@@ -4440,7 +4440,7 @@ void xspect_plot10(xspect *sp, int n) { + /* Given an emission spectrum, set the UV output to the given level. */ + /* The shape of the UV is taken from FWA1_stim, and the level is */ + /* with respect to the Y of the input spectrum. */ +-/* The output range is extended to accomodate the UV wavelengths */ ++/* The output range is extended to accommodate the UV wavelengths */ + void xsp_setUV(xspect *out, xspect *in, double uvlevel) { + int i, xs, xe; + double ww, avg; +Index: trunk/spectro/ccxxmake.c +=================================================================== +--- trunk.orig/spectro/ccxxmake.c ++++ trunk/spectro/ccxxmake.c +@@ -395,7 +395,7 @@ int main(int argc, char *argv[]) { + /* COM port */ + } else if (argv[fa][1] == 'c') { + fa = nfa; +- if (na == NULL) usage(0,"Paramater expected following -c"); ++ if (na == NULL) usage(0,"Parameter expected following -c"); + comno = atoi(na); + if (comno < 1 || comno > 40) usage(0,"-c parameter %d out of range",comno); + +@@ -495,7 +495,7 @@ int main(int argc, char *argv[]) { + /* Serial port flow control */ + } else if (argv[fa][1] == 'W') { + fa = nfa; +- if (na == NULL) usage(0,"Paramater expected following -W"); ++ if (na == NULL) usage(0,"Parameter expected following -W"); + if (na[0] == 'n' || na[0] == 'N') + fc = fc_none; + else if (na[0] == 'h' || na[0] == 'H') +Index: trunk/spectro/dispread.c +=================================================================== +--- trunk.orig/spectro/dispread.c ++++ trunk/spectro/dispread.c +@@ -413,7 +413,7 @@ int main(int argc, char *argv[]) { + /* COM port */ + } else if (argv[fa][1] == 'c') { + fa = nfa; +- if (na == NULL) usage(0,"Paramater expected following -c"); ++ if (na == NULL) usage(0,"Parameter expected following -c"); + comport = atoi(na); + if (comport < 1 || comport > 50) usage(0,"-c parameter %d out of range",comport); + +Index: trunk/spectro/fakeread.c +=================================================================== +--- trunk.orig/spectro/fakeread.c ++++ trunk/spectro/fakeread.c +@@ -814,7 +814,7 @@ int main(int argc, char *argv[]) + + /* We're assuming that the input space has a perfect black point... */ + +- /* Lookup the ouput black point in XYZ PCS. We're assuming monotonicity.. */ ++ /* Lookup the output black point in XYZ PCS. We're assuming monotonicity.. */ + bp[0] = bp[1] = bp[2] = 0.0; + oluo->lookup(oluo, bp, bp); + +@@ -827,7 +827,7 @@ int main(int argc, char *argv[]) + bt1886 == 1 ? egamma : tgamma, bt1886 == 1 ? 1 : 0); + + if (verb) +- printf("Gamma Curve: Using ouput black offset proportion %f\n",outoprop); ++ printf("Gamma Curve: Using output black offset proportion %f\n",outoprop); + + if (bt1886 == 1) { /* Using effective gamma */ + if (verb) +Index: trunk/profile/invprofcheck.c +=================================================================== +--- trunk.orig/profile/invprofcheck.c ++++ trunk/profile/invprofcheck.c +@@ -99,7 +99,7 @@ void usage(void) { + fprintf(stderr," -k Show CIEDE2000 delta E values\n"); + fprintf(stderr," -w create %s visualisation (profile%s)\n",vrml_format(),vrml_ext()); + fprintf(stderr," -x Use %s axes\n",vrml_format()); +- fprintf(stderr," -e Color vectors acording to delta E\n"); ++ fprintf(stderr," -e Color vectors according to delta E\n"); + fprintf(stderr," profile.icm Profile to check\n"); + exit(1); + } +Index: trunk/profile/profcheck.c +=================================================================== +--- trunk.orig/profile/profcheck.c ++++ trunk/profile/profcheck.c +@@ -59,7 +59,7 @@ usage(void) { + fprintf(stderr," -w create %s visualisation (iccprofile%s)\n",vrml_format(),vrml_ext()); + fprintf(stderr," -x Use %s axes\n",vrml_format()); + fprintf(stderr," -m Make %s lines a minimum of 0.5\n",vrml_format()); +- fprintf(stderr," -e Color vectors acording to delta E\n"); ++ fprintf(stderr," -e Color vectors according to delta E\n"); + fprintf(stderr," -h Plot a histogram of delta E's\n"); + fprintf(stderr," -s Sort output by delta E\n"); + fprintf(stderr," -P N.NN Create a pruned .ti3 with points less or equal to N.NN delta E\n"); diff --git a/debian/patches/110_dispwin_segfault.patch b/debian/patches/110_dispwin_segfault.patch new file mode 100644 index 0000000..2b1e684 --- /dev/null +++ b/debian/patches/110_dispwin_segfault.patch @@ -0,0 +1,20 @@ +Description: Add check for NULL pointer +Author: Jörg Frings-Fürst <debian@jff-webhsoting.net> +Bug-Debian: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=700253 +Forwarded: http://www.freelists.org/post/argyllcms/dispwin-bad-command-line-option-makes-dispwin-segfault +Reviewed-by: +Last-Update: 2015-08-23 +--- +This patch header follows DEP-3: http://dep.debian.net/deps/dep3/ +Index: trunk/spectro/dispwin.c +=================================================================== +--- trunk.orig/spectro/dispwin.c ++++ trunk/spectro/dispwin.c +@@ -5553,6 +5553,7 @@ main(int argc, char *argv[]) { + + /* Display number */ + else if (argv[fa][1] == 'd') { ++ if(na == NULL) usage(0, "-d parameter missing"); + if (strncmp(na,"web",3) == 0 + || strncmp(na,"WEB",3) == 0) { + webdisp = 8080; diff --git a/debian/patches/120_usb-db_new.patch b/debian/patches/120_usb-db_new.patch new file mode 100644 index 0000000..f826509 --- /dev/null +++ b/debian/patches/120_usb-db_new.patch @@ -0,0 +1,19 @@ +Description: Use hwdb builtin, instead of the obsolete usb-db in the udev rules. +Author: Dmitrijs Ledkovs <dmitrij.ledkov@ubuntu.com> +Bug-Ubuntu: https://bugs.launchpad.net/bugs/1200185 +Bug-Debian: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=762887 +Last-Update: 2014-09-26 +--- +This patch header follows DEP-3: http://dep.debian.net/deps/dep3/ +Index: trunk/usb/55-Argyll.rules +=================================================================== +--- trunk.orig/usb/55-Argyll.rules 2014-09-25 11:10:12.000000000 +0200 ++++ trunk/usb/55-Argyll.rules 2014-09-26 14:08:21.067295380 +0200 +@@ -85,6 +85,6 @@ + ENV{COLOR_MEASUREMENT_DEVICE}=="*?", ENV{ACL_MANAGE}!="*?", MODE="660", GROUP="plugdev" + + # Set ID_VENDOR and ID_MODEL acording to VID and PID +-TEST=="/lib/udev/usb-db", IMPORT{program}="usb-db %p" ++IMPORT{builtin}="hwdb --subsystem=usb" + + LABEL="argyll_rules_end" diff --git a/debian/patches/15_jam.patch b/debian/patches/15_jam.patch new file mode 100644 index 0000000..251f61f --- /dev/null +++ b/debian/patches/15_jam.patch @@ -0,0 +1,143 @@ +Description: Add multiarch support to jam files +Author: Jörg Frings Fürst <debian@jff-webhosting.net> +Forwarded: http://www.freelists.org/post/argyllcms/Some-buildsystem-issues +Last-Update: 2015-08-23 +--- +This patch header follows DEP-3: http://dep.debian.net/deps/dep3/ +Index: trunk/Jambase +=================================================================== +--- trunk.orig/Jambase ++++ trunk/Jambase +@@ -941,7 +941,7 @@ else if $(UNIX) + + # UNIX defaults + +- CCFLAGS ?= -DUNIX -D_THREAD_SAFE -pipe ; ++ CCFLAGS ?= $(CPPFLAGS) -g -DUNIX -D_THREAD_SAFE -pipe ; + CCOPTFLAG ?= -O2 ; + CCDEBUGFLAG ?= -g ; + CCPROFFLAG ?= ; +@@ -951,7 +951,7 @@ else if $(UNIX) + CHGRP ?= chgrp ; + CHOWN ?= chown ; + LEX ?= lex ; +- LINKFLAGS ?= ; ++ LINKFLAGS ?= $(LDFLAGS) ; + LINKOPTFLAG ?= -O ; # Affects creating .so's + LINKSTRIPFLAG ?= -s ; + LINKDEBUGFLAG ?= ; +@@ -1037,7 +1037,7 @@ else if $(UNIX) + RMDIR ?= $(RM) ; + RSH ?= rsh ; + SED ?= sed ; +- SHELLHEADER ?= "#!/bin/sh" ; ++ SHELLHEADER ?= "#!/bin/bash" ; + SHELLMODE ?= 755 ; + SLASH ?= / ; + STDHDRS ?= /usr/include ; +Index: trunk/Jamtop +=================================================================== +--- trunk.orig/Jamtop ++++ trunk/Jamtop +@@ -23,6 +23,7 @@ ANCHORED_PATH_VARS = DESTDIR ; + # Should we also allow CFLAGS, CXXFLAGS, CPPFLAGS & LDFLAGS env. variables + # to have effect ? + ++BUILD_SHARED_LIB = 1 ; + + # Tell standalone libraries that they are part of Argyll: + DEFINES += ARGYLLCMS ; +@@ -139,17 +140,82 @@ rule CheckForLibrary { + } + + if ! $(BUILTIN_$(UCASE)) && $(UNIX) { +- if [ GLOB /usr/include$(subd) : $(lcase).h $(lcase)lib.h ] +- || [ GLOB /usr/local/include$(subd) : $(lcase).h $(lcase)lib.h ] +- || [ GLOB /usr/include/x86_64-linux-gnu$(subd) : $(lcase).h $(lcase)lib.h ] +- || [ GLOB /usr/include/i386-linux-gnu$(subd) : $(lcase).h $(lcase)lib.h ] { +- if [ GLOB /usr/lib : lib$(lcase).so ] || [ GLOB /usr/lib : lib$(lcase).a ] +- || [ GLOB /usr/local/lib : lib$(lcase).so ] || [ GLOB /usr/local/lib : lib$(lcase).a ] +- || [ GLOB /usr/lib64 : lib$(lcase).so ] || [ GLOB /usr/lib64 : lib$(lcase).a ] +- || [ GLOB /usr/lib/x86_64-linux-gnu : lib$(lcase).so ] +- || [ GLOB /usr/lib/x86_64-linux-gnu : lib$(lcase).a ] +- || [ GLOB /usr/lib/i386-linux-gnu : lib$(lcase).so ] +- || [ GLOB /usr/lib/i386-linux-gnu : lib$(lcase).a ] { ++ if [ GLOB /usr/include$(subd) : $(lcase).h $(lcase)lib.h ] ++ || [ GLOB /usr/local/include$(subd) : $(lcase).h $(lcase)lib.h ] ++ || [ GLOB /usr/include/x86_64-linux-gnu$(subd) : $(lcase).h $(lcase)lib.h ] ++ || [ GLOB /usr/include/i386-linux-gnu$(subd) : $(lcase).h $(lcase)lib.h ] ++ || [ GLOB /usr/include/alpha-linux-gnu$(subd) : $(lcase).h $(lcase)lib.h ] ++ || [ GLOB /usr/include/aarch64-linux-gnu$(subd) : $(lcase).h $(lcase)lib.h ] ++ || [ GLOB /usr/include/arm-linux-gnueabi$(subd) : $(lcase).h $(lcase)lib.h ] ++ || [ GLOB /usr/include/arm-linux-gnueabihf$(subd) : $(lcase).h $(lcase)lib.h ] ++ || [ GLOB /usr/include/hppa-linux-gnu$(subd) : $(lcase).h $(lcase)lib.h ] ++ || [ GLOB /usr/include/i386-gnu$(subd) : $(lcase).h $(lcase)lib.h ] ++ || [ GLOB /usr/include/x86_64-kfreebsd-gnu$(subd) : $(lcase).h $(lcase)lib.h ] ++ || [ GLOB /usr/include/i386-kfreebsd-gnu$(subd) : $(lcase).h $(lcase)lib.h ] ++ || [ GLOB /usr/include/m68k-linux-gnu$(subd) : $(lcase).h $(lcase)lib.h ] ++ || [ GLOB /usr/include/mips-linux-gnu$(subd) : $(lcase).h $(lcase)lib.h ] ++ || [ GLOB /usr/include/mipsel-linux-gnu$(subd) : $(lcase).h $(lcase)lib.h ] ++ || [ GLOB /usr/include/mips64el-linux-gnuabi64$(subd) : $(lcase).h $(lcase)lib.h ] ++ || [ GLOB /usr/include/powerpc-linux-gnu$(subd) : $(lcase).h $(lcase)lib.h ] ++ || [ GLOB /usr/include/powerpc-linux-gnuspe$(subd) : $(lcase).h $(lcase)lib.h ] ++ || [ GLOB /usr/include/powerpc64-linux-gnu$(subd) : $(lcase).h $(lcase)lib.h ] ++ || [ GLOB /usr/include/powerpc64le-linux-gnu$(subd) : $(lcase).h $(lcase)lib.h ] ++ || [ GLOB /usr/include/s390x-linux-gnu$(subd) : $(lcase).h $(lcase)lib.h ] ++ || [ GLOB /usr/include/sh4-linux-gnu$(subd) : $(lcase).h $(lcase)lib.h ] ++ || [ GLOB /usr/include/sparc-linux-gnu$(subd) : $(lcase).h $(lcase)lib.h ] ++ || [ GLOB /usr/include/sparc64-linux-gnu$(subd) : $(lcase).h $(lcase)lib.h ] ++ || [ GLOB /usr/include/x86_64-linux-gnux32$(subd) : $(lcase).h $(lcase)lib.h ] { ++ if [ GLOB /usr/lib : lib$(lcase).so ] || [ GLOB /usr/lib : lib$(lcase).a ] ++ || [ GLOB /usr/local/lib : lib$(lcase).so ] ++ || [ GLOB /usr/local/lib : lib$(lcase).a ] ++ || [ GLOB /usr/lib64 : lib$(lcase).so ] ++ || [ GLOB /usr/lib64 : lib$(lcase).a ] ++ || [ GLOB /usr/lib/x86_64-linux-gnu : lib$(lcase).so ] ++ || [ GLOB /usr/lib/x86_64-linux-gnu : lib$(lcase).a ] ++ || [ GLOB /usr/lib/i386-linux-gnu : lib$(lcase).so ] ++ || [ GLOB /usr/lib/i386-linux-gnu : lib$(lcase).a ] ++ || [ GLOB /usr/lib/alpha-linux-gnu : lib$(lcase).so ] ++ || [ GLOB /usr/lib/alpha-linux-gnu : lib$(lcase).a ] ++ || [ GLOB /usr/lib/aarch64-linux-gnu : lib$(lcase).so ] ++ || [ GLOB /usr/lib/aarch64-linux-gnu : lib$(lcase).a ] ++ || [ GLOB /usr/lib/arm-linux-gnueabi : lib$(lcase).so ] ++ || [ GLOB /usr/lib/arm-linux-gnueabi : lib$(lcase).a ] ++ || [ GLOB /usr/lib/arm-linux-gnueabihf : lib$(lcase).so ] ++ || [ GLOB /usr/lib/arm-linux-gnueabihf : lib$(lcase).a ] ++ || [ GLOB /usr/lib/hppa-linux-gnu : lib$(lcase).so ] ++ || [ GLOB /usr/lib/hppa-linux-gnu : lib$(lcase).a ] ++ || [ GLOB /usr/lib/i386-gnu : lib$(lcase).so ] ++ || [ GLOB /usr/lib/i386-gnu : lib$(lcase).a ] ++ || [ GLOB /usr/lib/x86_64-kfreebsd-gnu : lib$(lcase).so ] ++ || [ GLOB /usr/lib/x86_64-kfreebsd-gnu : lib$(lcase).a ] ++ || [ GLOB /usr/lib/i386-kfreebsd-gnu : lib$(lcase).so ] ++ || [ GLOB /usr/lib/i386-kfreebsd-gnu : lib$(lcase).a ] ++ || [ GLOB /usr/lib/m68k-linux-gnu : lib$(lcase).so ] ++ || [ GLOB /usr/lib/m68k-linux-gnu : lib$(lcase).a ] ++ || [ GLOB /usr/lib/mips-linux-gnu : lib$(lcase).so ] ++ || [ GLOB /usr/lib/mips-linux-gnu : lib$(lcase).a ] ++ || [ GLOB /usr/lib/mipsel-linux-gnu : lib$(lcase).so ] ++ || [ GLOB /usr/lib/mipsel-linux-gnu : lib$(lcase).a ] ++ || [ GLOB /usr/lib/mips64el-linux-gnuabi64 : lib$(lcase).so ] ++ || [ GLOB /usr/lib/mips64el-linux-gnuabi64 : lib$(lcase).a ] ++ || [ GLOB /usr/lib/powerpc-linux-gnu : lib$(lcase).so ] ++ || [ GLOB /usr/lib/powerpc-linux-gnu : lib$(lcase).a ] ++ || [ GLOB /usr/lib/powerpc-linux-gnuspe : lib$(lcase).so ] ++ || [ GLOB /usr/lib/powerpc-linux-gnuspe : lib$(lcase).a ] ++ || [ GLOB /usr/lib/powerpc64-linux-gnu : lib$(lcase).so ] ++ || [ GLOB /usr/lib/powerpc64-linux-gnu : lib$(lcase).a ] ++ || [ GLOB /usr/lib/powerpc64le-linux-gnu : lib$(lcase).so ] ++ || [ GLOB /usr/lib/powerpc64le-linux-gnu : lib$(lcase).a ] ++ || [ GLOB /usr/lib/s390x-linux-gnu : lib$(lcase).so ] ++ || [ GLOB /usr/lib/s390x-linux-gnu : lib$(lcase).a ] ++ || [ GLOB /usr/lib/sh4-linux-gnu : lib$(lcase).so ] ++ || [ GLOB /usr/lib/sh4-linux-gnu : lib$(lcase).a ] ++ || [ GLOB /usr/lib/sparc-linux-gnu : lib$(lcase).so ] ++ || [ GLOB /usr/lib/sparc-linux-gnu : lib$(lcase).a ] ++ || [ GLOB /usr/lib/sparc64-linux-gnu : lib$(lcase).so ] ++ || [ GLOB /usr/lib/sparc64-linux-gnu : lib$(lcase).a ] ++ || [ GLOB /usr/lib/x86_64-linux-gnux32 : lib$(lcase).so ] ++ || [ GLOB /usr/lib/x86_64-linux-gnux32 : lib$(lcase).a ] { + echo "Using system $(UCASE) library" ; + $(UCASE)LIB = ; + $(UCASE)INC = ; diff --git a/debian/patches/20_hurd_PATH_MAX.patch b/debian/patches/20_hurd_PATH_MAX.patch new file mode 100644 index 0000000..0079adb --- /dev/null +++ b/debian/patches/20_hurd_PATH_MAX.patch @@ -0,0 +1,81 @@ +Description: Add on hurdi386 missing PATH_MAX +Author: Jörg Frings-Fürst <debian@jff-webhosting.net> +Bug-Debian: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=762774 +Last-Update: 2014-09-25 +--- +This patch header follows DEP-3: http://dep.debian.net/deps/dep3/ +Index: trunk/numlib/numsup.c +=================================================================== +--- trunk.orig/numlib/numsup.c ++++ trunk/numlib/numsup.c +@@ -40,6 +40,10 @@ + + /* Globals */ + ++#ifndef PATH_MAX ++#define PATH_MAX 4096 ++#endif ++ + char *exe_path = "\000"; /* Directory executable resides in ('/' dir separator) */ + //char *error_program = "Unknown"; /* Name to report as responsible for an error */ + +Index: trunk/spectro/mongoose.c +=================================================================== +--- trunk.orig/spectro/mongoose.c ++++ trunk/spectro/mongoose.c +@@ -46,6 +46,10 @@ + added to /usr/lib/firewalld/services + */ + ++#ifndef PATH_MAX ++#define PATH_MAX 4096 ++#endif ++ + #if defined(_WIN32) + #define _CRT_SECURE_NO_WARNINGS // Disable deprecation warning in VS2005 + #else +Index: trunk/spectro/usbio_lx.c +=================================================================== +--- trunk.orig/spectro/usbio_lx.c ++++ trunk/spectro/usbio_lx.c +@@ -33,6 +33,10 @@ + #define poll_x poll + #endif + ++#ifndef PATH_MAX ++#define PATH_MAX 4096 ++#endif ++ + /* USB descriptors are little endian */ + + /* Take a word sized return buffer, and convert it to an unsigned int */ +Index: trunk/spectro/usbio_nt.c +=================================================================== +--- trunk.orig/spectro/usbio_nt.c ++++ trunk/spectro/usbio_nt.c +@@ -31,6 +31,10 @@ + #define LIBUSBW1_PATH_MAX 512 + #define LIBUSBW1_DEFAULT_TIMEOUT 5000 + ++#ifndef PATH_MAX ++#define PATH_MAX 4096 ++#endif ++ + /* USB descriptors are little endian */ + + /* Take a word sized return buffer, and convert it to an unsigned int */ +Index: trunk/spectro/hidio.c +=================================================================== +--- trunk.orig/spectro/hidio.c ++++ trunk/spectro/hidio.c +@@ -100,6 +100,10 @@ + #endif + #endif + ++#ifndef PATH_MAX ++#define PATH_MAX 4096 ++#endif ++ + #if defined(NT) + + /* Declartions to enable HID access without using the DDK */ diff --git a/debian/patches/25_kfreebsd.patch b/debian/patches/25_kfreebsd.patch new file mode 100644 index 0000000..2b4b622 --- /dev/null +++ b/debian/patches/25_kfreebsd.patch @@ -0,0 +1,55 @@ +From: Steven Chamberlain <steven@pyro.eu.org> +Subject: use FreeBSD USB I/O code on GNU/kFreeBSD + +Use the FreeBSD USB I/O code not just on __FreeBSD__ itself, +but on any system having __FreeBSD_kernel__ (such as GNU/kFreeBSD). + +--- a/spectro/usbio.c ++++ b/spectro/usbio.c +@@ -94,7 +94,7 @@ + # include "usbio_ox.c" + # endif + # if defined(UNIX_X11) +-# if defined(__FreeBSD__) ++# if defined(__FreeBSD_kernel__) + # include "usbio_bsd.c" + # else + # include "usbio_lx.c" +--- a/spectro/usbio_bsd.c ++++ b/spectro/usbio_bsd.c +@@ -37,7 +37,7 @@ + #include <fcntl.h> + #include <glob.h> + #include <sys/ioctl.h> +-#if defined(__FreeBSD__) ++#if defined(__FreeBSD_kernel__) + # include <dev/usb/usb_ioctl.h> /* Not sure what's going on with FreeBSD... */ + #else + # include <dev/usb/usb.h> /* The usual include for BSD */ +@@ -59,7 +59,7 @@ + ) { + int i, j; + char *paths[] = { +-#if defined(__FreeBSD__) ++#if defined(__FreeBSD_kernel__) + "/dev/usb/[0-9]*.*.0", /* FreeBSD >= 8 */ + "/dev/ugen[0-9]*", /* FreeBSD < 8, but no .E */ + #else +@@ -94,7 +94,7 @@ + /* For all the nodes found by the glob */ + for (i = 0; i < g.gl_pathc; i++) { + +-#if defined(__FreeBSD__) ++#if defined(__FreeBSD_kernel__) + /* Skip anything with an end point number */ + if (j == 1 && strchr(g.gl_pathv[i], '.') != NULL) + continue; +@@ -141,7 +141,7 @@ + + /* Create the base device path */ + dpath = g.gl_pathv[i]; +-#if defined(__FreeBSD__) ++#if defined(__FreeBSD_kernel__) + if (j == 0) { /* Remove .0 */ + if ((cp = strrchr(dpath, '.')) != NULL + && cp[1] == '0' && cp[2] == '\000') diff --git a/debian/patches/30_gcc5.patch b/debian/patches/30_gcc5.patch new file mode 100644 index 0000000..2806745 --- /dev/null +++ b/debian/patches/30_gcc5.patch @@ -0,0 +1,20 @@ +Description: Fix FTBFS with GCC 5 +Author: James Cowgill <james410@cowgill.org.uk> +Bug-Debian: https://bugs.debian.org/777779 +Forwarded: no +--- +This patch header follows DEP-3: http://dep.debian.net/deps/dep3/ +--- a/icc/icc.h ++++ b/icc/icc.h +@@ -100,7 +100,11 @@ + #define CF64PREC "LL" /* Constant precision specifier */ + + #ifndef ATTRIBUTE_NORETURN ++#ifdef _MSC_VER + # define ATTRIBUTE_NORETURN __declspec(noreturn) ++#else ++# define ATTRIBUTE_NORETURN __attribute__((noreturn)) ++#endif + #endif + + #else /* !__STDC_VERSION__ */ diff --git a/debian/patches/series b/debian/patches/series new file mode 100644 index 0000000..8f5d038 --- /dev/null +++ b/debian/patches/series @@ -0,0 +1,7 @@ +110_dispwin_segfault.patch +100_spelling.patch +15_jam.patch +20_hurd_PATH_MAX.patch +#120_usb-db_new.patch +#25_kfreebsd.patch +30_gcc5.patch diff --git a/debian/rules b/debian/rules new file mode 100755 index 0000000..50d805e --- /dev/null +++ b/debian/rules @@ -0,0 +1,122 @@ +#!/usr/bin/make -f + +# Uncomment this to turn on verbose mode. +#export DH_VERBOSE=1 + +export DH_OPTIONS + +NO_PROC=$(shell cat /proc/cpuinfo | grep processor | wc -l) + +JAMCMDLINE = -q -fJambase -j$(NO_PROC) -sPREFIX=/usr -sDESTDIR=$(CURDIR)/debian/tmp -sREFSUBDIR=share/color/argyll/ref +CHDATE=$(shell dpkg-parsechangelog -S Date) +CRDATE=$(shell date --utc -d "$(CHDATE)" "+%a %b %d %T %Y") + +# +# Test for gcc-5 support +# +#export CC=gcc-5 +#export CXX=g++-5 + + +%: + dh $@ + +override_dh_auto_build: + gcc --version + jam $(JAMCMDLINE) all + +override_dh_auto_install: + jam $(JAMCMDLINE) dirs + jam $(JAMCMDLINE) install + rm $(CURDIR)/debian/tmp/usr/bin/License.txt + # + # Make build results reproducible. + # + sed -i 's/CREATED.*/CREATED $(CRDATE)/' $(CURDIR)/debian/tmp/usr/share/color/argyll/ref/RefMediumGamut.gam + sed -i 's/CREATED.*/CREATED $(CRDATE)/' $(CURDIR)/debian/tmp/usr/share/color/argyll/ref/linear.cal + sed -i 's/CREATED.*/CREATED $(CRDATE)/' $(CURDIR)/debian/tmp/usr/share/color/argyll/ref/strange.cal + +override_dh_installdocs: + dh_installdocs + rm -f $(CURDIR)/debian/argyll-doc/usr/share/doc/argyll-doc/License.txt + rm -f $(CURDIR)/debian/argyll-doc/usr/share/doc/argyll-doc/License2.txt + rm -f $(CURDIR)/debian/argyll-doc/usr/share/doc/argyll-doc/License3.txt + rm -f $(CURDIR)/debian/argyll-doc/usr/share/doc/argyll-doc/DocLicense.txt + rm -f $(CURDIR)/debian/argyll-doc/usr/share/doc/argyll-doc/afiles + +override_dh_installchangelogs: + dh_installchangelogs log.txt + +override_dh_strip: + dh_strip --dbg-package=argyll-dbg + +override_dh_builddeb: + dh_builddeb + +override_dh_compress: + dh_compress -X.html + +build-manpages: + help2man -N --no-discard-stderr --name="Apply device calibration to an ICC profile." debian/tmp/usr/bin/applycal > debian/man/applycal.1 + help2man -N --no-discard-stderr --name="Dump an ICC file in human readable form." debian/tmp/usr/bin/iccdump > debian/man/iccdump.1 + help2man -N --no-discard-stderr --name="Translate colors through an ICC profile." debian/tmp/usr/bin/icclu > debian/man/icclu.1 + help2man -N --no-discard-stderr --name="Average or merge values in .ti3 like files." debian/tmp/usr/bin/average > debian/man/average.1 + help2man -N --no-discard-stderr --name="Convert Colorblind raw device profile data to Argyll data." debian/tmp/usr/bin/cb2ti3 > debian/man/cb2ti3.1 + help2man -N --no-discard-stderr --name="Color Correct a TIFF file using any sequence of ICC profiles or Calibrations." debian/tmp/usr/bin/cctiff > debian/man/cctiff.1 + help2man -N --no-discard-stderr --name="Create CCMX or CCSS." debian/tmp/usr/bin/ccxxmake > debian/man/ccxxmake.1 + help2man -N --no-discard-stderr --name="Read Target Test Chart." debian/tmp/usr/bin/chartread > debian/man/chartread.1 + help2man -N --no-discard-stderr --name="Link ICC profiles." debian/tmp/usr/bin/collink > debian/man/collink.1 + help2man -N --no-discard-stderr --name="Create ICC profile." debian/tmp/usr/bin/colprof > debian/man/colprof.1 + help2man -N --no-discard-stderr --name="Verify CIE values." debian/tmp/usr/bin/colverify > debian/man/colverify.1 + help2man -N --no-discard-stderr --name="Calibrate a Display." debian/tmp/usr/bin/dispcal > debian/man/dispcal.1 + help2man -N --no-discard-stderr --name="Read a Display." debian/tmp/usr/bin/dispread > debian/man/dispread.1 + help2man -N --no-discard-stderr --name="Test display patch window, Set Video LUTs, Install profiles." debian/tmp/usr/bin/dispwin > debian/man/dispwin.1 + help2man -N --no-discard-stderr --name="Extract an ICC profile from a TIFF file." debian/tmp/usr/bin/extracticc > debian/man/extracticc.1 + help2man -N --no-discard-stderr --name="Extract a text tag from an ICC profile." debian/tmp/usr/bin/extractttag > debian/man/extractttag.1 + help2man -N --no-discard-stderr --name="Create a fake CMY data file from a CMYK profile." debian/tmp/usr/bin/fakeCMY > debian/man/fakeCMY.1 + help2man -N --no-discard-stderr --name="Fake test chart reader - lookup values in ICC/MPP profile." debian/tmp/usr/bin/fakeread > debian/man/fakeread.1 + help2man -N --no-discard-stderr --name="Convert a TIFF file to monochrome using an ICC device profile." debian/tmp/usr/bin/greytiff > debian/man/greytiff.1 + help2man -N --no-discard-stderr --name="Dump an ICC file in human readable form." debian/tmp/usr/bin/iccdump > debian/man/iccdump.1 + help2man -N --no-discard-stderr --name="Create Lab/Jab gamut plot." debian/tmp/usr/bin/iccgamut > debian/man/iccgamut.1 + help2man -N --no-discard-stderr --name="Measure an illuminant." debian/tmp/usr/bin/illumread > debian/man/illumread.1 + help2man -N --no-discard-stderr --name="Check fwd to bwd relative transfer of an ICC file." debian/tmp/usr/bin/invprofcheck > debian/man/invprofcheck.1 + help2man -N --no-discard-stderr --name="Convert Kodak raw printer profile data to Argyll print data." debian/tmp/usr/bin/kodak2ti3 > debian/man/kodak2ti3.1 + help2man -N --no-discard-stderr --name="Check Model Printer Profile." debian/tmp/usr/bin/mppcheck > debian/man/mppcheck.1 + help2man -N --no-discard-stderr --name="Translate colors through an MPP profile." debian/tmp/usr/bin/mpplu > debian/man/mpplu.1 + help2man -N --no-discard-stderr --name="Create Model Printer Profile." debian/tmp/usr/bin/mppprof > debian/man/mppprof.1 + help2man -N --no-discard-stderr --name="List information about the FILEs." debian/tmp/usr/bin/oeminst > debian/man/oeminst.1 + help2man -N --no-discard-stderr --name="Create printer calibration." debian/tmp/usr/bin/printcal > debian/man/printcal.1 + help2man -N --no-discard-stderr --name="Generate Target PostScrip file." debian/tmp/usr/bin/printtarg > debian/man/printtarg.1 + help2man -N --no-discard-stderr --name="Check accuracy of ICC profile." debian/tmp/usr/bin/profcheck > debian/man/profcheck.1 + help2man -N --no-discard-stderr --name="Create abstract correction profile given table of absolute CIE correction values." debian/tmp/usr/bin/refine > debian/man/refine.1 + help2man -N --no-discard-stderr --name="Invert AtoB1 to make BtoA1 for CMYK profiles." debian/tmp/usr/bin/revfix > debian/man/revfix.1 + help2man -N --no-discard-stderr --name="Scanin." debian/tmp/usr/bin/scanin > debian/man/scanin.1 + help2man -N --no-discard-stderr --name="Convert spectral .ti3 file." debian/tmp/usr/bin/spec2cie > debian/man/spec2cie.1 + help2man -N --no-discard-stderr --name="Plot spectrum and calculate CCT and VCT." debian/tmp/usr/bin/specplot > debian/man/specplot.1 + help2man -N --no-discard-stderr --name="Split a .ti3 into two." debian/tmp/usr/bin/splitti3 > debian/man/splitti3.1 + help2man -N --no-discard-stderr --name="Read Print Spot values." debian/tmp/usr/bin/spotread > debian/man/spotread.1 + help2man -N --no-discard-stderr --name="Create a synthetic calibration file." debian/tmp/usr/bin/synthcal > debian/man/synthcal.1 + help2man -N --no-discard-stderr --name="Synthetic device model test chart reader." debian/tmp/usr/bin/synthread > debian/man/synthread.1 + help2man -N --no-discard-stderr --name="Generate Target deviceb test chart color values." debian/tmp/usr/bin/targen > debian/man/targen.1 + help2man -N --no-discard-stderr --name="Create VRML image of the gamut surface of a TIFF." debian/tmp/usr/bin/tiffgamut > debian/man/tiffgamut.1 + help2man -N --no-discard-stderr --name="Create test images, default hex RGB surface and wedge." debian/tmp/usr/bin/timage > debian/man/timage.1 + help2man -N --no-discard-stderr --name="Convert Gretag/Logo or X-Rite ColorPport raw RGB or CMYK device profile data to Argyll CGATS data." debian/tmp/usr/bin/txt2ti3 > debian/man/txt2ti3.1 + help2man -N --no-discard-stderr --name="View gamuts." debian/tmp/usr/bin/viewgam > debian/man/viewgam.1 + help2man -N --no-discard-stderr --name="Translate colors through an xicc." debian/tmp/usr/bin/xicclu > debian/man/xicclu.1 + help2man -N --no-discard-stderr --name="Convert LightSpace raw RGB device profile data to Argyll CGATS dat" debian/tmp/usr/bin/ls2ti3 > debian/man/ls2ti3.1 + +VERSION = $(shell head -n1 debian/changelog | sed -e 's/.*(//;s/+.*).*//;s/\+/\-/') + +get-orig-source: + wget http://www.argyllcms.com/Argyll_V${VERSION}_src.zip -O ../Argyll_V${VERSION}_src.zip + unzip ../Argyll_V${VERSION}_src.zip -d ../ + mv ../Argyll_V${VERSION} ../argyll_${VERSION} + rm -f ../argyll_${VERSION}/yajl/yajl_test.exe ../argyll_${VERSION}/yajl/yajl_test.obj + rm -fr ../argyll_${VERSION}/usb/bin + rm -fr ../argyll_${VERSION}/jpeg + rm -fr ../argyll_${VERSION}/tiff + rm -fr ../argyll_${VERSION}/zlib + rm -fr ../argyll_${VERSION}/png + chmod -R -x+X ../argyll_${VERSION}/* + tar cJf ../argyll_${VERSION}+repack.orig.tar.xz ../argyll_${VERSION} + rm -fr ../argyll_${VERSION} ../Argyll_V${VERSION}_src.zip diff --git a/debian/source/format b/debian/source/format new file mode 100644 index 0000000..163aaf8 --- /dev/null +++ b/debian/source/format @@ -0,0 +1 @@ +3.0 (quilt) diff --git a/debian/tools/buildman.sh b/debian/tools/buildman.sh new file mode 100644 index 0000000..fee4393 --- /dev/null +++ b/debian/tools/buildman.sh @@ -0,0 +1,13 @@ +#!/bin/bash + +cd ../../ + +quilt push -a + +debian/rules override_dh_auto_build +debian/rules override_dh_auto_install +debian/rules build-manpages +debian/rules override_dh_auto_clean + +quilt pop -a + diff --git a/debian/watch b/debian/watch new file mode 100644 index 0000000..fddab5e --- /dev/null +++ b/debian/watch @@ -0,0 +1,5 @@ +version=3 + +#opts="dversionmangle=s/\+repack\d+$//" http://www.argyllcms.com/downloadsrc.html Argyll_V(.*)_src\.zip +opts=dversionmangle=s/\+repack(.*)// \ +http://www.argyllcms.com/downloadsrc.html Argyll_V(.*)_src\.zip |