summaryrefslogtreecommitdiff
path: root/doc/instruments.html
diff options
context:
space:
mode:
Diffstat (limited to 'doc/instruments.html')
-rw-r--r--doc/instruments.html3361
1 files changed, 1941 insertions, 1420 deletions
diff --git a/doc/instruments.html b/doc/instruments.html
index 896c0e5..0bcc62d 100644
--- a/doc/instruments.html
+++ b/doc/instruments.html
@@ -1,28 +1,44 @@
-<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
-<html>
- <head>
- <title>Operation of particular instruments</title>
- <meta http-equiv="content-type" content="text/html;
- charset=ISO-8859-1">
- </head>
- <body>
- <h2><u>Operation of particular instruments</u></h2>
- <span style="font-weight: bold;">Please note that instruments are
- being driven by ArgyllCMS drivers, and that any problems or
- queries regarding instrument<br>
- operation </span><span style="font-weight: bold;">should be
- directed to the Argyll's author(s) or the Argyll mailing list, and
- not to any</span> <span style="font-weight: bold;">other party.</span><span
- style="font-weight: bold;"></span><br>
- <br>
- The following instruments are directly supported:<br>
- (Please <span style="font-weight: bold;">note</span> the <a
- href="Installing.html">installation instructions</a> for each
- platform - they contain important information for getting your
- instruments working.)<br>
- <br>
- X-Rite:<br>
- &nbsp;&nbsp;&nbsp; <a href="#DTP20">DTP20 "Pulse"</a>&nbsp;
+<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
+<html>
+ <head>
+ <title>Operation of particular instruments</title>
+ <meta http-equiv="content-type" content="text/html;
+ charset=windows-1252">
+ </head>
+ <body>
+ <h2><u>Operation of particular instruments</u></h2>
+ <span style="font-weight: bold;">Please note that instruments are
+ being driven by ArgyllCMS drivers, and that any problems or
+ queries regarding instrument<br>
+ operation </span><span style="font-weight: bold;">should be
+ directed to the Argyll's author(s) or the Argyll mailing list, and
+ not to any</span> <span style="font-weight: bold;">other party.</span><span
+ style="font-weight: bold;"></span><br>
+ <br>
+ The following instruments are directly supported:<br>
+ (Please <span style="font-weight: bold;">note</span> the <a
+ href="Installing.html">installation instructions</a> for each
+ platform - they contain important information for getting your
+ instruments working.)<br>
+ <br>
+ JETI:<br>
+ <br>
+ &nbsp;&nbsp;&nbsp; <a href="#specbos">specbos 1211 &amp; 1201</a>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
+
+
+
+
+
+
+
+
+
+
+
+ - Tele-Spectro-Radiometer<br>
+ <br>
+ X-Rite:<br>
+ &nbsp;&nbsp;&nbsp; <a href="#DTP20">DTP20 "Pulse"</a>&nbsp;
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
@@ -45,7 +61,19 @@
- - "swipe" type reflective spectrometer, that can be used untethered.<br>
+
+
+
+
+
+
+
+
+
+
+
+
+ - "swipe" type reflective spectrometer, that can be used untethered.<br>
&nbsp;&nbsp;&nbsp; <a href="#DTP22">DTP22 Digital Swatchbook</a>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
@@ -68,7 +96,19 @@
- - spot type reflective spectrometer.<br>
+
+
+
+
+
+
+
+
+
+
+
+
+ - spot type reflective spectrometer.<br>
&nbsp;&nbsp;&nbsp; <a href="#DTP41">DTP41</a>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
@@ -91,9 +131,21 @@
- - spot and strip reading reflective spectrometer.<br>
- &nbsp;&nbsp;&nbsp; <a href="#DTP41">DTP41T</a> &nbsp; &nbsp; &nbsp;
- &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp;
+
+
+
+
+
+
+
+
+
+
+
+
+ - spot and strip reading reflective spectrometer.<br>
+ &nbsp;&nbsp;&nbsp; <a href="#DTP41">DTP41T</a> &nbsp; &nbsp; &nbsp;
+ &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp;
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
@@ -116,7 +168,19 @@
- - spot and strip reading reflective/transmissive spectrometer.<br>
+
+
+
+
+
+
+
+
+
+
+
+
+ - spot and strip reading reflective/transmissive spectrometer.<br>
&nbsp;&nbsp;&nbsp; <a href="#dtp51">DTP51</a>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
@@ -139,7 +203,19 @@
- - strip reading reflective colorimeter.<br>
+
+
+
+
+
+
+
+
+
+
+
+
+ - strip reading reflective colorimeter.<br>
&nbsp;&nbsp;&nbsp; <a href="#DTP92">DTP92</a>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
@@ -162,7 +238,19 @@
- - CRT display colorimeter.<br>
+
+
+
+
+
+
+
+
+
+
+
+
+ - CRT display colorimeter.<br>
&nbsp;&nbsp;&nbsp; <a href="#DTP94">DTP94</a> <font size="-1">"Optix
@@ -185,7 +273,19 @@
- XR"</font> or "Optix XR2" or "Optix Pro"- display colorimeter.<br>
+
+
+
+
+
+
+
+
+
+
+
+
+ XR"</font> or "Optix XR2" or "Optix Pro"- display colorimeter.<br>
<a href="#ColorMunki"><span style="text-decoration: underline;"></span></a>&nbsp;&nbsp;&nbsp;
@@ -208,62 +308,73 @@
- <a href="#ColorMunki"><span style="text-decoration: underline;">ColorMunki</span></a>
- Design or Photo&nbsp;
- &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; - spot and "swipe"
- reflective/emissive spectrometer (UV cut only).<br>
- &nbsp;&nbsp;&nbsp; <a href="#i1d"><span style="text-decoration:
- underline;">ColorMunki</span></a> Create or Smile&nbsp;&nbsp;
- &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; - display
- colorimeter. (Similar to an Eye-One Display 2)<br>
- &nbsp;&nbsp;&nbsp; <a href="#Huey">Lenovo W</a> &nbsp; &nbsp;
- &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;
- &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; - built in laptop
- Huey display colorimeter.<br>
- &nbsp;&nbsp;&nbsp; <a href="#i1d3">Eye-One Display 3</a> &nbsp;
- &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;
- &nbsp; &nbsp; - i1 DisplayPro and ColorMunki Display<br>
- &nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;
- &nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;
- &nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;
- &nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;
- &nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;&nbsp;&nbsp; [ The OEM
- i1Display Pro and<br>
- &nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;
- &nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;
- &nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;
- &nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;
- &nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
- NEC SpectraSensor Pro are also reported to work.]<br>
- &nbsp; &nbsp; <a href="instruments.html#i1p2">Eye-One Pro2</a>
- &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;
- &nbsp; &nbsp; &nbsp; &nbsp;&nbsp;&nbsp;&nbsp; &nbsp; - spot and
- "swipe" reflective/emissive spectrometer.<br>
- <br>
- Gretag-Macbeth (now X-Rite):<br>
- &nbsp; &nbsp; <a href="#sl">Spectrolino</a> &nbsp; &nbsp; &nbsp;
- &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;
- &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; - spot reflective/emissive
- spectrometer<br>
- &nbsp; &nbsp; <a href="#ss">SpectroScan</a> &nbsp; &nbsp; &nbsp;
- &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;
- &nbsp; &nbsp; &nbsp; &nbsp; - spot reflective/emissive, XY table
- reflective spectrometer&nbsp; <br>
- &nbsp; &nbsp; <a href="#ss">SpectroScanT</a> &nbsp; &nbsp; &nbsp;
- &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;
- &nbsp; &nbsp; &nbsp; - spot reflective/emissive/transmissive, XY
- table reflective spectrometer<br>
- &nbsp; &nbsp; <a href="#i1p">Eye-One Pro</a> "EFI ES-1000" &nbsp;
- &nbsp; &nbsp; &nbsp; &nbsp; - spot and "swipe" reflective/emissive
- spectrometer<br>
- &nbsp; &nbsp; <a href="instruments.html#i1m">Eye-One Monitor</a>
- &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;
- &nbsp; &nbsp; &nbsp; &nbsp; - spot and "swipe" emissive spectrometer<br>
- &nbsp;&nbsp;&nbsp; <a href="#i1d">Eye-One Display 1 or 2&nbsp; or
- LT</a>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; - display
- colorimeter<br>
- &nbsp;&nbsp;&nbsp; <a href="instruments.html#i1d">HP DreamColor or
- APS</a>&nbsp;
+
+
+
+
+
+
+
+
+
+
+
+
+ <a href="#ColorMunki"><span style="text-decoration: underline;">ColorMunki</span></a>
+ Design or Photo&nbsp;
+ &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; - spot and "swipe"
+ reflective/emissive spectrometer (UV cut only).<br>
+ &nbsp;&nbsp;&nbsp; <a href="#i1d"><span style="text-decoration:
+ underline;">ColorMunki</span></a> Create or Smile&nbsp;&nbsp;
+ &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; - display
+ colorimeter. (Similar to an Eye-One Display 2)<br>
+ &nbsp;&nbsp;&nbsp; <a href="#Huey">Lenovo W</a> &nbsp; &nbsp;
+ &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;
+ &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; - built in laptop
+ Huey display colorimeter.<br>
+ &nbsp;&nbsp;&nbsp; <a href="#i1d3">Eye-One Display 3</a> &nbsp;
+ &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;
+ &nbsp; &nbsp; - i1 DisplayPro and ColorMunki Display<br>
+ &nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;
+ &nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;
+ &nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;
+ &nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;
+ &nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;&nbsp;&nbsp; [ The OEM
+ i1Display Pro, NEC SpectraSensor Pro,<br>
+ &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;
+ &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;
+ &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;
+ &nbsp; &nbsp; &nbsp;&nbsp; Quato Silver Haze 3 OEM and HP
+ DreamColor&nbsp; i1d3 are also reported to work.]<br>
+ &nbsp; &nbsp; <a href="instruments.html#i1p2">Eye-One Pro2</a>
+ &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;
+ &nbsp; &nbsp; &nbsp; &nbsp;&nbsp;&nbsp;&nbsp; &nbsp; - spot and
+ "swipe" reflective/emissive spectrometer.<br>
+ <br>
+ Gretag-Macbeth (now X-Rite):<br>
+ &nbsp; &nbsp; <a href="#sl">Spectrolino</a> &nbsp; &nbsp; &nbsp;
+ &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;
+ &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; - spot reflective/emissive
+ spectrometer<br>
+ &nbsp; &nbsp; <a href="#ss">SpectroScan</a> &nbsp; &nbsp; &nbsp;
+ &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;
+ &nbsp; &nbsp; &nbsp; &nbsp; - spot reflective/emissive, XY table
+ reflective spectrometer&nbsp; <br>
+ &nbsp; &nbsp; <a href="#ss">SpectroScanT</a> &nbsp; &nbsp; &nbsp;
+ &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;
+ &nbsp; &nbsp; &nbsp; - spot reflective/emissive/transmissive, XY
+ table reflective spectrometer<br>
+ &nbsp; &nbsp; <a href="#i1p">Eye-One Pro</a> "EFI ES-1000" &nbsp;
+ &nbsp; &nbsp; &nbsp; &nbsp; - spot and "swipe" reflective/emissive
+ spectrometer<br>
+ &nbsp; &nbsp; <a href="instruments.html#i1m">Eye-One Monitor</a>
+ &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;
+ &nbsp; &nbsp; &nbsp; &nbsp; - spot and "swipe" emissive spectrometer<br>
+ &nbsp;&nbsp;&nbsp; <a href="#i1d">Eye-One Display 1 or 2&nbsp; or
+ LT</a>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; - display
+ colorimeter<br>
+ &nbsp;&nbsp;&nbsp; <a href="instruments.html#i1d">HP DreamColor or
+ APS</a>&nbsp;
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
@@ -286,8 +397,20 @@
- - display colorimeter. (Treated as a Eye-One Display 2)<br>
- &nbsp;&nbsp;&nbsp; <a href="#i1d">CalMAN X2</a>
+
+
+
+
+
+
+
+
+
+
+
+
+ - display colorimeter. (Treated as a Eye-One Display 2)<br>
+ &nbsp;&nbsp;&nbsp; <a href="#i1d">CalMAN X2</a>
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
@@ -310,17 +433,29 @@
- - display colorimeter. (Treated as a Eye-One Display 2)<br>
- &nbsp;&nbsp;&nbsp; <a href="#Huey">Huey</a> &nbsp; &nbsp; &nbsp;
- &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;
- &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;
- &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; - display colorimeter<br>
- <br>
- Sequel imaging (Now X-Rite):<br>
- &nbsp;&nbsp;&nbsp;&nbsp; <a href="#mox">MonacoOPTIX</a> &nbsp;
- &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp;
- &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; - display colorimeter (Treated
- as an Eye-One Display 1)<br>
+
+
+
+
+
+
+
+
+
+
+
+
+ - display colorimeter. (Treated as a Eye-One Display 2)<br>
+ &nbsp;&nbsp;&nbsp; <a href="#Huey">Huey</a> &nbsp; &nbsp; &nbsp;
+ &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;
+ &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;
+ &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; - display colorimeter<br>
+ <br>
+ Sequel imaging (Now X-Rite):<br>
+ &nbsp;&nbsp;&nbsp;&nbsp; <a href="#mox">MonacoOPTIX</a> &nbsp;
+ &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp;
+ &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; - display colorimeter (Treated
+ as an Eye-One Display 1)<br>
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
@@ -343,9 +478,21 @@
- [The Sequel Chroma 4 may also work.]<br>
- <br>
- Lacie Blue
+
+
+
+
+
+
+
+
+
+
+
+
+ [The Sequel Chroma 4 may also work.]<br>
+ <br>
+ Lacie Blue
Eye:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
@@ -368,15 +515,6 @@
- - see <a href="#i1d">Eye-One Display</a><br>
- <br>
- DataColor ColorVision:<br>
- &nbsp;&nbsp;&nbsp;&nbsp; <a href="#spyd2">Spyder 2</a> &nbsp;
- &nbsp; &nbsp; &nbsp;&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;
- &nbsp; &nbsp; &nbsp; &nbsp;&nbsp;
- &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; - display colorimeter (Note
- that the user must <a href="oeminst.html">supply</a> firmware)<br>
- &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
@@ -388,6 +526,17 @@
+
+ - see <a href="#i1d">Eye-One Display</a><br>
+ <br>
+ DataColor ColorVision:<br>
+ &nbsp;&nbsp;&nbsp;&nbsp; <a href="#spyd2">Spyder 2</a> &nbsp;
+ &nbsp; &nbsp; &nbsp;&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;
+ &nbsp; &nbsp; &nbsp; &nbsp;&nbsp;
+ &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; - display colorimeter (Note
+ that the user must <a href="oeminst.html">supply</a> firmware)<br>
+ &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
+
@@ -398,20 +547,6 @@
- [The Spyder 1 also seems to work.]<br>
- &nbsp;&nbsp;&nbsp;&nbsp; <a href="#spyd3">Spyder 3</a> &nbsp;
- &nbsp; &nbsp; &nbsp;&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;
- &nbsp; &nbsp; &nbsp; &nbsp;&nbsp;
- &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; - display colorimeter.<br>
- &nbsp;&nbsp;&nbsp;&nbsp; <a href="#spyd4">Spyder 4</a> &nbsp;
- &nbsp; &nbsp; &nbsp;&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;
- &nbsp; &nbsp; &nbsp; &nbsp;&nbsp;
- &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; - display colorimeter (Note
- that the user must <a href="oeminst.html">supply</a> calibration
- data)<br>
- <br>
- Other:<br>
- &nbsp;&nbsp;&nbsp; <span class="titre"><a href="#HCFR">Colorim&egrave;tre
@@ -433,6 +568,21 @@
+
+ [The Spyder 1 also seems to work.]<br>
+ &nbsp;&nbsp;&nbsp;&nbsp; <a href="#spyd3">Spyder 3</a> &nbsp;
+ &nbsp; &nbsp; &nbsp;&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;
+ &nbsp; &nbsp; &nbsp; &nbsp;&nbsp;
+ &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; - display colorimeter.<br>
+ &nbsp;&nbsp;&nbsp;&nbsp; <a href="#spyd4">Spyder 4</a> &nbsp;
+ &nbsp; &nbsp; &nbsp;&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;
+ &nbsp; &nbsp; &nbsp; &nbsp;&nbsp;
+ &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; - display colorimeter (Note
+ that the user must <a href="oeminst.html">supply</a> calibration
+ data)<br>
+ <br>
+ Other:<br>
+ &nbsp;&nbsp;&nbsp; <span class="titre"><a href="#HCFR">Colorimètre
HCFR</a>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
@@ -455,9 +605,6 @@
- - display colorimeter<br>
- </span>&nbsp;&nbsp;&nbsp;
- ColorHug&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
@@ -469,10 +616,15 @@
+
+ - display colorimeter<br>
+ </span>&nbsp;&nbsp;&nbsp; <a href="#ColorHug">ColorHug</a>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
+
+
+
+
+
- - display colorimeter. Experimental only, does not work on all
- platforms.<br>
- &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
@@ -485,284 +637,289 @@
- Set environmental variable ENABLE_COLORHUG=true to test it.<span
- class="titre"><br>
- </span><br>
- Other instruments can be supported indirectly, since patch result
- files created by other packages can be imported into Argyll.<br>
- <span class="titre"><br>
- General information about:<br>
- <br>
- &nbsp;&nbsp;&nbsp; <a href="#strip">Strip reading instruments</a><br>
- </span>&nbsp;&nbsp;&nbsp; <a href="#xy">X-Y Table instruments</a><br>
- &nbsp;&nbsp;&nbsp; <a href="#spot">Spot reading instruments</a><br>
- <span style="font-weight: bold;"></span><br>
- <br>
- There is a <a href="ccmxs.html">list of contributed</a> <span
- style="font-weight: bold;">ccmx</span> (Colorimeter Correction
- Matrix) files.<br>
- <br>
- <hr style="width: 100%; height: 2px;">
- <h3><a name="strip"></a>Strip reading instruments</h3>
- When used with a <span style="font-weight: bold;">DT20</span>, <span
- style="font-weight: bold;">DTP41</span>, <span
- style="font-weight: bold;">DTP51</span>, <span
- style="font-weight: bold;">Eye-One Pro<span style="font-weight:
- bold;"> </span></span>or <span style="font-weight: bold;">ColorMunki</span>
- strip reading instrument, chartread will first establish
- communications with the instrument, and then set it up ready to read
- the strips. The strips are labeled A to ZZ, and for each strip it
- will prompt:<br>
- <br>
- &nbsp;&nbsp;&nbsp; About to read strip XX&nbsp; :<br>
- <br>
- where XX is the strip label, and this is followed by the available
- options to navigate, read the strip, or finish. Note that the normal
- (forward) direction of strip reading is one that starts at the strip
- label.<br>
- <br>
- For the <span style="font-weight: bold;">DTP51</span> you should
- feed the strip into the instrument, and the microswitch will trigger
- the read.<br>
- <br>
- For the <span style="font-weight: bold;">DTP41</span> you should
- line the appropriate strip up in the machine, and press its button.<br>
- <br>
- For the <span style="font-weight: bold;">Eye-One Pro</span> you
- should set the guide to the appropriate strip, place the instrument
- <span style="text-decoration: underline;">ahead</span> of the first
- patch on blank paper, and then press and hold the instruments
- button. When you hear a beep from the computer, you can then move
- the instrument steadily over the patches, releasing the button after
- the instrument is past the last patch. Moving the instrument too
- fast or changing speeds may cause a mis-read, or a scan with few
- samples read per patch.<br>
- <br>
- For the <span style="font-weight: bold;">ColorMunki</span> with the
- default chart, the patches are the same width as the silver portion
- of body (white version), or the textured portion of the body (black
- version). Place aperture of the the instrument (located at its
- center) in the white space ahead of the first patch, and then press
- and hold the instruments button. When you hear a beep from the
- computer, you can then move the instrument steadily over the
- patches, releasing the button after the instrument is past the last
- patch. Moving the instrument too fast or changing speeds may cause a
- mis-read, or a scan with few samples read per patch. For the <span
- style="font-weight: bold;">high density</span> ColorMunki chart (<a
- href="printtarg.html#h">printtarg -h</a>), the patches are
- arranged so that three rows are exactly the width of the&nbsp; body
- of the instrument. If you are careful you can use this to guide the
- center of the instrument over each row, or you may prefer to use
- something like a plastic ruler to help guide the instrument.<br>
- <br>
- Using the <span style="font-weight: bold;">DTP20</span> or the <span
- style="font-weight: bold;">Eye-One Pro</span> or <span
- style="font-weight: bold;">ColorMunki</span> with a randomized
- chart layout, the strip may be scanned from either direction. If a
- randomized chart layout has not been used for the <span
- style="font-weight: bold;">Eye-One Pro</span> or <span
- style="font-weight: bold;">ColorMunki</span>, then the chart
- should only be read in the one direction (use <a
- href="chartread.html#B">chartread -B</a>).<br>
- <br>
- Note that you may have to check that system alert sounds are enabled
- and at a suitable volume to in order to hear the beep prompt. For
- the Eye-One Pro and ColorMunki, a second beep will sound after a
- successfully read strip, or a double beep will sound,&nbsp;
- indicating a failure or warning that needs attention. See also the
- note on Linux in <a href="Installing_Linux.html">installation</a>.<br>
- <br>
- If the strip is read successfully there will be a single "success"
- beep, and the line will be followed with:<br>
- <br>
- &nbsp;&nbsp;&nbsp; Ready to read strip&nbsp; XX&nbsp; : <br>
- &nbsp;&nbsp;&nbsp; Strip read OK<br>
- <br>
- If there is an error of some sort there will be a double "fail"
- beep, and a message will be issued, and you will be asked whether to
- abort the chart reading, or retry the<br>
- failed strip:<br>
- <br>
- &nbsp;&nbsp;&nbsp; Ready to read strip XX&nbsp; : <br>
- &nbsp;&nbsp;&nbsp; Strip read failed due to misread (Not enough
- patches)<br>
- <br>
- &nbsp;&nbsp;&nbsp; Hit Esc to give up, any other key to retry:<br>
- <br>
- If you are unable to successfully read a strip after several
- retries, you can skip that strip using the <span
- style="font-weight: bold;">'n'</span> key, and save<br>
- the chart readings without that strip.<br>
- <br>
- If the strip is read successfully, but the patches values don't seem
- to be what is expected, you will get a double "fail" beep&nbsp; and
- the following type of warning:<br>
- <br>
- &nbsp;&nbsp;&nbsp; Ready to read strip&nbsp; XX&nbsp; :<br>
- &nbsp;&nbsp;&nbsp; (Warning) Seem to have read strip&nbsp; YY&nbsp;
- rather than&nbsp; XX !<br>
- &nbsp;&nbsp;&nbsp; Hit Return to use it anyway, any other key to
- retry, Esc, ^C or Q to give up:<br>
- <br>
- This could be because you have accidentally read the wrong strip (a
- common mistake), or it could be that the device response is so
- different from what is expected that warning is erroneous, or you
- may get a lot of these sorts of warnings if you are accidentally
- reading the wrong chart. You may also get this sort of warning if
- you are not using bi-direction reading (chartread -B), and read the
- strip from the wrong end.<br>
- If you are absolutely sure you lined up the correct strip, then hit
- return, otherwise line the appropriate strip up again, and hit some
- other key (ie. space).<br>
- Erroneous warnings are less likely if a previous profile for a
- device was given to <span style="font-weight: bold;">targen</span>
- to set more accurate expectations.<br>
- <br>
- You may also see the following type of warning:<br>
- <br>
- &nbsp;&nbsp;&nbsp; Ready to read strip&nbsp; XX&nbsp; :<br>
- &nbsp;&nbsp;&nbsp; (Warning) Patch error YY.YYY (&gt;35 not good,
- &gt;95 bad)<br>
- &nbsp;&nbsp; There is at least one patch with an very unexpected
- response!<br>
- &nbsp;&nbsp;&nbsp; Hit Return to use it anyway, any other key to
- retry, Esc, ^C or Q to give up:<br>
- <br>
- Similar to the previous warning, this indicates that while the right
- strip appears to have been read, one of the patch readings is quite
- different to what is expected. This may indicate an error of some
- sort (ie. damaged test chart, or bad instrument positioning), or may
- be erroneous if the actual device response is quite different to the
- expectation. Erroneous warnings are less likely if a previous
- profile for a device was given to <span style="font-weight: bold;">targen</span>
- to set more accurate expectations.<br>
- <br>
- You can also navigate the next strip to be read using the <span
- style="font-weight: bold;">'f'</span> key to move forward and the
- <span style="font-weight: bold;">'b'</span> keys<span
- style="font-weight: bold;"></span><span style="font-weight: bold;"></span>
- to move backwards. The prompt will indicate whether this strip has
- already been read or not, or whether all strips have been read. You
- can also use <span style="font-weight: bold;">'n'</span> to move
- forward to the next unread strip. After each successful reading it
- will move forward to the next unread strip. When you are finished,
- use the <span style="font-weight: bold;">'d'</span> to indicate
- that you are done. You can choose to finish before all the strips
- are read, and the patches that have been read will be saved to the
- .ti3 file. This is useful if you are unable to read a particular
- strip successfully, or if you are unable to finish the chart in one
- session, and you can later <span style="text-decoration:
- underline;">resume</span> reading the chart by using the <span
- style="font-weight: bold;">chartread -r</span> flag. [You could
- resume reading the chart patch by patch using the <span
- style="font-weight: bold;">chartread -r -p</span> if you are
- unable to read a strip successfully.]<br>
- <br>
- When reading in patch by patch mode, there are a few additional
- navigation options, such as <span style="font-weight: bold;"><span
- style="font-weight: bold;">F</span></span> to move forward 10
- patches, <span style="font-weight: bold;">B</span> to move
- backwards 10 patches, and <span style="font-weight: bold;">g</span>
- to go to a specific patch.<br>
- <br>
- You can abort the whole process at any time by hitting Escape, and
- the readings will not be saved.<br>
- <br>
- <hr style="width: 100%; height: 2px;">
- <h3><a name="xy"></a>X-Y Table instruments</h3>
- When you are using an XY table type instrument, such as a Gretag <span
- style="font-weight: bold;">SpectroScan</span>, &nbsp;chartread
- will first establish communications with the instrument, and then
- set it up ready to read the chart. You will be prompted for each
- sheet with a message such as:<br>
- <br>
- &nbsp;&nbsp;&nbsp; Please make sure that the white reference is in
- slot 1, then<br>
- &nbsp;&nbsp;&nbsp; place sheet 1 of 4 on table, then<br>
- &nbsp;&nbsp;&nbsp; hit return to continue, Esc to give up<br>
- <br>
- After hitting return you will be prompted to line up three squares
- on the sheet, one at a time:<br>
- <br>
- &nbsp;&nbsp;&nbsp; Using the XY table controls, locate patch A1 with
- the sight,<br>
- &nbsp;&nbsp;&nbsp; then hit return to continue, Esc to give up<br>
- <br>
- On completing this, the instrument will commence reading each sheet.<br>
- <br>
- <hr style="width: 100%; height: 2px;">
- <h3><a name="spot"></a>Spot reading instruments</h3>
- When used with a <span style="font-weight: bold;">DT22</span> or <span
- style="font-weight: bold;">SpectroLino</span> or use the patch by
- patch reading mode (<span style="font-weight: bold;">chartread -p</span>)
- with the <span style="font-weight: bold;"></span> <span
- style="font-weight: bold;">Eye-One Pro<span style="font-weight:
- bold;"> </span></span>or <span style="font-weight: bold;">ColorMunki</span>
- instrument, or use the external values mode (<span
- style="font-weight: bold;">chartread -x</span>), chartread will
- first establish communications with the instrument, and then set it
- up ready to read the patches. The patches are typically labeled by
- column A to ZZ, and row 1-999. Each patch will prompt:<br>
- <br>
- &nbsp;&nbsp;&nbsp; Ready to read patch 'XX'&nbsp; :<br>
- <br>
- where XX is the patch label, and this is followed by the available
- options to navigate, read the strip, or finish.<br>
- <br>
- Place the instrument on the indicated patch, and trigger a reading
- using one of the available methods (typically using the instrument
- switch of pressing a key).<br>
- <br>
- There should be an audible prompt on a successful or failed reading.
- <br>
- <br>
- Note that you may have to check that system alert sounds are enabled
- and at a suitable volume to in order to hear the beep prompt. For
- the Eye-One Pro and ColorMunki, a second beep will sound after a
- successfully read strip, or a double beep will sound,&nbsp;
- indicating a failure or warning that needs attention. See also the
- note on Linux in <a href="Installing_Linux.html">installation</a>.<br>
- <br>
- If the patch is read successfully, the line will be completed with:<br>
- <br>
- &nbsp;&nbsp;&nbsp; Ready to read patch&nbsp; XX&nbsp; :<br>
- &nbsp;&nbsp;&nbsp; Patch read OK<br>
- <br>
- If there is an error of some sort, a message will be issued, and you
- will be asked whether to abort the chart reading, or retry the<br>
- failed patch:<br>
- <br>
- &nbsp;&nbsp;&nbsp; Ready to read patch XX&nbsp; : read_strip
- returned 'Strip misread' (Bad reading)<br>
- <br>
- &nbsp;&nbsp;&nbsp; Strip read failed due to misread<br>
- &nbsp;&nbsp;&nbsp; Hit Esc to give up, any other key to retry:<br>
- <br>
- You can navigate the next patch to be read using the <span
- style="font-weight: bold;">'f'</span> key to move forward and the
- <span style="font-weight: bold;">'b'</span> keys<span
- style="font-weight: bold;"></span><span style="font-weight: bold;"></span>
- to move backwards, while <span style="font-weight: bold;">'F'</span>
- and <span style="font-weight: bold;">'B'</span> will move forward
- and backwards by 10 patches. The prompt will indicate whether this
- patch has already been read or not, or whether all patches have been
- read. You can also use <span style="font-weight: bold;">'n'</span>
- to move forward to the next unread patch. When you are finished, use
- the <span style="font-weight: bold;">'d'</span> to indicate that
- you are done. You can choose to finish before all the patches are
- read, and they will be saved to the .ti3 file. This is useful if you
- are unable to finish the chart in one session, and you can later <span
- style="text-decoration: underline;">resume</span> reading the
- chart by using the <span style="font-weight: bold;">chartread -r</span>
- flag.<br>
- <br>
- You can abort the whole process at any time by hitting Escape, and
- the readings will not be saved.<br>
- <br>
- <span style="font-weight: bold;"></span>
- <hr style="width: 100%; height: 2px;">
- <h3><a name="displaytype"></a>Display Type<br>
- </h3>
+
+
+
+
+
+
+ - display colorimeter<span class="titre"><br>
+ </span><br>
+ Other instruments can be supported indirectly, since patch result
+ files created by other packages can be imported into Argyll.<br>
+ <span class="titre"><br>
+ General information about:<br>
+ <br>
+ &nbsp;&nbsp;&nbsp; <a href="#strip">Strip reading instruments</a><br>
+ </span>&nbsp;&nbsp;&nbsp; <a href="#xy">X-Y Table instruments</a><br>
+ &nbsp;&nbsp;&nbsp; <a href="#spot">Spot reading instruments</a><br>
+ <span style="font-weight: bold;"></span><br>
+ <br>
+ There is a <a href="ccmxs.html">list of contributed</a> <span
+ style="font-weight: bold;">ccmx</span> (Colorimeter Correction
+ Matrix) files.<br>
+ <br>
+ <hr style="width: 100%; height: 2px;">
+ <h3><a name="strip"></a>Strip reading instruments</h3>
+ When used with a <span style="font-weight: bold;">DT20</span>, <span
+ style="font-weight: bold;">DTP41</span>, <span
+ style="font-weight: bold;">DTP51</span>, <span
+ style="font-weight: bold;">Eye-One Pro<span style="font-weight:
+ bold;"> </span></span>or <span style="font-weight: bold;">ColorMunki</span>
+ strip reading instrument, chartread will first establish
+ communications with the instrument, and then set it up ready to read
+ the strips. The strips are labeled A to ZZ, and for each strip it
+ will prompt:<br>
+ <br>
+ &nbsp;&nbsp;&nbsp; About to read strip XX&nbsp; :<br>
+ <br>
+ where XX is the strip label, and this is followed by the available
+ options to navigate, read the strip, or finish. Note that the normal
+ (forward) direction of strip reading is one that starts at the strip
+ label.<br>
+ <br>
+ For the <span style="font-weight: bold;">DTP51</span> you should
+ feed the strip into the instrument, and the microswitch will trigger
+ the read.<br>
+ <br>
+ For the <span style="font-weight: bold;">DTP41</span> you should
+ line the appropriate strip up in the machine, and press its button.<br>
+ <br>
+ For the <span style="font-weight: bold;">Eye-One Pro</span> you
+ should set the guide to the appropriate strip, place the instrument
+ <span style="text-decoration: underline;">ahead</span> of the first
+ patch on blank paper, and then press and hold the instruments
+ button. When you hear a beep from the computer, you can then move
+ the instrument steadily over the patches, releasing the button after
+ the instrument is past the last patch. Moving the instrument too
+ fast or changing speeds may cause a mis-read, or a scan with few
+ samples read per patch.<br>
+ <br>
+ For the <span style="font-weight: bold;">ColorMunki</span> with the
+ default chart, the patches are the same width as the silver portion
+ of body (white version), or the textured portion of the body (black
+ version). Place aperture of the the instrument (located at its
+ center) in the white space ahead of the first patch, and then press
+ and hold the instruments button. When you hear a beep from the
+ computer, you can then move the instrument steadily over the
+ patches, releasing the button after the instrument is past the last
+ patch. Moving the instrument too fast or changing speeds may cause a
+ mis-read, or a scan with few samples read per patch. For the <span
+ style="font-weight: bold;">high density</span> ColorMunki chart (<a
+ href="printtarg.html#h">printtarg -h</a>), the patches are
+ arranged so that three rows are exactly the width of the&nbsp; body
+ of the instrument. If you are careful you can use this to guide the
+ center of the instrument over each row, or you may prefer to use
+ something like a plastic ruler to help guide the instrument.<br>
+ <br>
+ Using the <span style="font-weight: bold;">DTP20</span> or the <span
+ style="font-weight: bold;">Eye-One Pro</span> or <span
+ style="font-weight: bold;">ColorMunki</span> with a randomized
+ chart layout, the strip may be scanned from either direction. If a
+ randomized chart layout has not been used for the <span
+ style="font-weight: bold;">Eye-One Pro</span> or <span
+ style="font-weight: bold;">ColorMunki</span>, then the chart
+ should only be read in the one direction (use <a
+ href="chartread.html#B">chartread -B</a>).<br>
+ <br>
+ Note that you may have to check that system alert sounds are enabled
+ and at a suitable volume to in order to hear the beep prompt. For
+ the Eye-One Pro and ColorMunki, a second beep will sound after a
+ successfully read strip, or a double beep will sound,&nbsp;
+ indicating a failure or warning that needs attention. See also the
+ note on Linux in <a href="Installing_Linux.html">installation</a>.<br>
+ <br>
+ If the strip is read successfully there will be a single "success"
+ beep, and the line will be followed with:<br>
+ <br>
+ &nbsp;&nbsp;&nbsp; Ready to read strip&nbsp; XX&nbsp; : <br>
+ &nbsp;&nbsp;&nbsp; Strip read OK<br>
+ <br>
+ If there is an error of some sort there will be a double "fail"
+ beep, and a message will be issued, and you will be asked whether to
+ abort the chart reading, or retry the<br>
+ failed strip:<br>
+ <br>
+ &nbsp;&nbsp;&nbsp; Ready to read strip XX&nbsp; : <br>
+ &nbsp;&nbsp;&nbsp; Strip read failed due to misread (Not enough
+ patches)<br>
+ <br>
+ &nbsp;&nbsp;&nbsp; Hit Esc to give up, any other key to retry:<br>
+ <br>
+ If you are unable to successfully read a strip after several
+ retries, you can skip that strip using the <span
+ style="font-weight: bold;">'n'</span> key, and save<br>
+ the chart readings without that strip.<br>
+ <br>
+ If the strip is read successfully, but the patches values don't seem
+ to be what is expected, you will get a double "fail" beep&nbsp; and
+ the following type of warning:<br>
+ <br>
+ &nbsp;&nbsp;&nbsp; Ready to read strip&nbsp; XX&nbsp; :<br>
+ &nbsp;&nbsp;&nbsp; (Warning) Seem to have read strip&nbsp; YY&nbsp;
+ rather than&nbsp; XX !<br>
+ &nbsp;&nbsp;&nbsp; Hit Return to use it anyway, any other key to
+ retry, Esc, ^C or Q to give up:<br>
+ <br>
+ This could be because you have accidentally read the wrong strip (a
+ common mistake), or it could be that the device response is so
+ different from what is expected that warning is erroneous, or you
+ may get a lot of these sorts of warnings if you are accidentally
+ reading the wrong chart. You may also get this sort of warning if
+ you are not using bi-direction reading (chartread -B), and read the
+ strip from the wrong end.<br>
+ If you are absolutely sure you lined up the correct strip, then hit
+ return, otherwise line the appropriate strip up again, and hit some
+ other key (ie. space).<br>
+ Erroneous warnings are less likely if a previous profile for a
+ device was given to <span style="font-weight: bold;">targen</span>
+ to set more accurate expectations.<br>
+ <br>
+ You may also see the following type of warning:<br>
+ <br>
+ &nbsp;&nbsp;&nbsp; Ready to read strip&nbsp; XX&nbsp; :<br>
+ &nbsp;&nbsp;&nbsp; (Warning) Patch error YY.YYY (&gt;35 not good,
+ &gt;95 bad)<br>
+ &nbsp;&nbsp; There is at least one patch with an very unexpected
+ response!<br>
+ &nbsp;&nbsp;&nbsp; Hit Return to use it anyway, any other key to
+ retry, Esc, ^C or Q to give up:<br>
+ <br>
+ Similar to the previous warning, this indicates that while the right
+ strip appears to have been read, one of the patch readings is quite
+ different to what is expected. This may indicate an error of some
+ sort (ie. damaged test chart, or bad instrument positioning), or may
+ be erroneous if the actual device response is quite different to the
+ expectation. Erroneous warnings are less likely if a previous
+ profile for a device was given to <span style="font-weight: bold;">targen</span>
+ to set more accurate expectations.<br>
+ <br>
+ You can also navigate the next strip to be read using the <span
+ style="font-weight: bold;">'f'</span> key to move forward and the
+ <span style="font-weight: bold;">'b'</span> keys<span
+ style="font-weight: bold;"></span><span style="font-weight: bold;"></span>
+ to move backwards. The prompt will indicate whether this strip has
+ already been read or not, or whether all strips have been read. You
+ can also use <span style="font-weight: bold;">'n'</span> to move
+ forward to the next unread strip. After each successful reading it
+ will move forward to the next unread strip. When you are finished,
+ use the <span style="font-weight: bold;">'d'</span> to indicate
+ that you are done. You can choose to finish before all the strips
+ are read, and the patches that have been read will be saved to the
+ .ti3 file. This is useful if you are unable to read a particular
+ strip successfully, or if you are unable to finish the chart in one
+ session, and you can later <span style="text-decoration:
+ underline;">resume</span> reading the chart by using the <span
+ style="font-weight: bold;">chartread -r</span> flag. [You could
+ resume reading the chart patch by patch using the <span
+ style="font-weight: bold;">chartread -r -p</span> if you are
+ unable to read a strip successfully.]<br>
+ <br>
+ When reading in patch by patch mode, there are a few additional
+ navigation options, such as <span style="font-weight: bold;"><span
+ style="font-weight: bold;">F</span></span> to move forward 10
+ patches, <span style="font-weight: bold;">B</span> to move
+ backwards 10 patches, and <span style="font-weight: bold;">g</span>
+ to go to a specific patch.<br>
+ <br>
+ You can abort the whole process at any time by hitting Escape, and
+ the readings will not be saved.<br>
+ <br>
+ <hr style="width: 100%; height: 2px;">
+ <h3><a name="xy"></a>X-Y Table instruments</h3>
+ When you are using an XY table type instrument, such as a Gretag <span
+ style="font-weight: bold;">SpectroScan</span>, &nbsp;chartread
+ will first establish communications with the instrument, and then
+ set it up ready to read the chart. You will be prompted for each
+ sheet with a message such as:<br>
+ <br>
+ &nbsp;&nbsp;&nbsp; Please make sure that the white reference is in
+ slot 1, then<br>
+ &nbsp;&nbsp;&nbsp; place sheet 1 of 4 on table, then<br>
+ &nbsp;&nbsp;&nbsp; hit return to continue, Esc to give up<br>
+ <br>
+ After hitting return you will be prompted to line up three squares
+ on the sheet, one at a time:<br>
+ <br>
+ &nbsp;&nbsp;&nbsp; Using the XY table controls, locate patch A1 with
+ the sight,<br>
+ &nbsp;&nbsp;&nbsp; then hit return to continue, Esc to give up<br>
+ <br>
+ On completing this, the instrument will commence reading each sheet.<br>
+ <br>
+ <hr style="width: 100%; height: 2px;">
+ <h3><a name="spot"></a>Spot reading instruments</h3>
+ When used with a <span style="font-weight: bold;">DT22</span> or <span
+ style="font-weight: bold;">SpectroLino</span> or use the patch by
+ patch reading mode (<span style="font-weight: bold;">chartread -p</span>)
+ with the <span style="font-weight: bold;"></span> <span
+ style="font-weight: bold;">Eye-One Pro<span style="font-weight:
+ bold;"> </span></span>or <span style="font-weight: bold;">ColorMunki</span>
+ instrument, or use the external values mode (<span
+ style="font-weight: bold;">chartread -x</span>), chartread will
+ first establish communications with the instrument, and then set it
+ up ready to read the patches. The patches are typically labeled by
+ column A to ZZ, and row 1-999. Each patch will prompt:<br>
+ <br>
+ &nbsp;&nbsp;&nbsp; Ready to read patch 'XX'&nbsp; :<br>
+ <br>
+ where XX is the patch label, and this is followed by the available
+ options to navigate, read the strip, or finish.<br>
+ <br>
+ Place the instrument on the indicated patch, and trigger a reading
+ using one of the available methods (typically using the instrument
+ switch of pressing a key).<br>
+ <br>
+ There should be an audible prompt on a successful or failed reading.
+ <br>
+ <br>
+ Note that you may have to check that system alert sounds are enabled
+ and at a suitable volume to in order to hear the beep prompt. For
+ the Eye-One Pro and ColorMunki, a second beep will sound after a
+ successfully read strip, or a double beep will sound,&nbsp;
+ indicating a failure or warning that needs attention. See also the
+ note on Linux in <a href="Installing_Linux.html">installation</a>.<br>
+ <br>
+ If the patch is read successfully, the line will be completed with:<br>
+ <br>
+ &nbsp;&nbsp;&nbsp; Ready to read patch&nbsp; XX&nbsp; :<br>
+ &nbsp;&nbsp;&nbsp; Patch read OK<br>
+ <br>
+ If there is an error of some sort, a message will be issued, and you
+ will be asked whether to abort the chart reading, or retry the<br>
+ failed patch:<br>
+ <br>
+ &nbsp;&nbsp;&nbsp; Ready to read patch XX&nbsp; : read_strip
+ returned 'Strip misread' (Bad reading)<br>
+ <br>
+ &nbsp;&nbsp;&nbsp; Strip read failed due to misread<br>
+ &nbsp;&nbsp;&nbsp; Hit Esc to give up, any other key to retry:<br>
+ <br>
+ You can navigate the next patch to be read using the <span
+ style="font-weight: bold;">'f'</span> key to move forward and the
+ <span style="font-weight: bold;">'b'</span> keys<span
+ style="font-weight: bold;"></span><span style="font-weight: bold;"></span>
+ to move backwards, while <span style="font-weight: bold;">'F'</span>
+ and <span style="font-weight: bold;">'B'</span> will move forward
+ and backwards by 10 patches. The prompt will indicate whether this
+ patch has already been read or not, or whether all patches have been
+ read. You can also use <span style="font-weight: bold;">'n'</span>
+ to move forward to the next unread patch. When you are finished, use
+ the <span style="font-weight: bold;">'d'</span> to indicate that
+ you are done. You can choose to finish before all the patches are
+ read, and they will be saved to the .ti3 file. This is useful if you
+ are unable to finish the chart in one session, and you can later <span
+ style="text-decoration: underline;">resume</span> reading the
+ chart by using the <span style="font-weight: bold;">chartread -r</span>
+ flag.<br>
+ <br>
+ You can abort the whole process at any time by hitting Escape, and
+ the readings will not be saved.<br>
+ <br>
+ <span style="font-weight: bold;"></span>
+ <hr style="width: 100%; height: 2px;">
+ <h3><a name="displaytype"></a>Display Type<br>
+ </h3>
Many of the colorimeters have a <span style="font-weight: bold;">display
@@ -780,360 +937,398 @@
- type</span> selection parameter. Depending on the instrument, this
- may combine two related functions: 1) Changing the measurement mode
- to suite either refresh-type, or non-refresh displays, and 2)
- Changing the calibration to suite a particular displays spectral
- characteristics.<br>
- <br>
- A refresh type display uses a technology that presents different
- portions of the image at different times, doing so at a high enough
- rate that this is normally imperceptible. This time varying
- characteristic can interfere with measuring a display color unless
- the instrument makes allowances for it, typically by making its
- measurement period a multiple of the display refresh period. Display
- types that <span style="font-weight: bold;">refresh</span> are CRT
- (Cathode Ray Tube), Single chip DLP (Digital Light Processing) and
- Plasma displays. An example of a <span style="font-weight: bold;">non-refresh</span>
- display technology is LCD (Liquid Crystal Display), although is a
- few cases the back-light illumination may have a low enough
- frequency flicker to benefit from the refresh mode.<br>
- <br>
- Instruments in which the display type selection only changes the
- measurement mode (i.e. i1d3), will typically have some other
- independent option to set the calibration type. Simpler instruments
- combine the measurement mode with a calibration selections,
- typically refresh+CRT and non-refresh+LCD. Some instruments are a
- hybrid of both (Spyder4), where the display type can select between
- generic refresh/non-refresh that can then use a .CCSS to set the
- calibration type, or a combined selection of non-refresh and a
- particular display type.<br>
- <br>
- See <a
- href="http://en.wikipedia.org/wiki/Comparison_of_display_technology">Comparison_of_display_technology</a>
- for some background on different display technologies.<br>
- <br>
- <hr size="2" width="100%"><br>
- <h3><a name="refreshmeasurement"></a>Refresh Rate Measurement</h3>
- <p>Most of the colorimeters that have a refresh display type
- selection, also have an ability to measure the refresh rate of a
- display. Some of the spectrometers also have a display refresh
- rate measurement capability when in an emissive measurement mode,
- even though they don't use this to support a refresh display mode.
- You can do a display refresh rate measurement in <a
- href="spotread.html">spotread</a> using the <b>'F' </b>key.
- The particular instruments have a range of accuracy when making
- this measurement. A rough guide is as follows:<br>
- <br>
- </p>
- <table border="1" cellpadding="2" cellspacing="2" height="230"
- width="372">
- <tbody>
- <tr>
- <td valign="top"><b>Instrument</b></td>
- <td valign="top"><b>Typical error in Hz.</b></td>
- </tr>
- <tr>
- <td valign="top">DTP92<br>
- </td>
- <td valign="top">0.1<br>
- </td>
- </tr>
- <tr>
- <td valign="top">i1 Display 2<br>
- </td>
- <td valign="top">0.5<br>
- </td>
- </tr>
- <tr>
- <td valign="top">Spyder 2<br>
- </td>
- <td valign="top">0.7<br>
- </td>
- </tr>
- <tr>
- <td valign="top">Spyder 3<br>
- </td>
- <td valign="top">3<br>
- </td>
- </tr>
- <tr>
- <td valign="top">Spyder 4<br>
- </td>
- <td valign="top">3<br>
- </td>
- </tr>
- <tr>
- <td valign="top">i1 Display Pro<br>
- </td>
- <td valign="top">0.05<br>
- </td>
- </tr>
- <tr>
- <td valign="top">i1 Pro Spectro.<br>
- </td>
- <td valign="top">0.05<br>
- </td>
- </tr>
- <tr>
- <td valign="top">ColorMunki Spectro.<br>
- </td>
- <td valign="top">0.05<br>
- </td>
- </tr>
- </tbody>
- </table>
- <p><br>
- </p>
- <hr style="width: 100%; height: 8px;"><br>
- <span style="font-weight: bold;"></span><br>
- <span style="font-weight: bold;"><a name="ColorMunki"></a><span
- style="font-weight: bold;">ColorMunki </span>Design or Photo <span
- style="font-weight: bold;">reflective/emissive spectrometer</span><br>
- <br>
- <img style="width: 272px; height: 243px;" alt="" title="ColorMunki
- (White)" src="ColorMunki.jpg">&nbsp;&nbsp; <br>
- <br>
- </span><span style="font-weight: bold;">Availability:<br>
- <br>
- </span>The <span style="font-weight: bold;">ColorMunki</span> <span
- style="font-weight: bold;">Design or Photo </span>from <a
- href="http://www.xrite.com/">X-Rite</a>&nbsp; is currently
- available in two different packages from the manufacturer. These
- packages differ in what features the manufacturers software
- provides, as well as cosmetic differences between the instrument
- (white and black). This comparison <a
- href="http://www.colormunki.com/product/show?page=2">chart</a>
- illustrates the differences. Used with Argyll, there are no
- differences in operation of a ColorMunki instrument, irrespective of
- which package it came with. The ColorMunki Design has the lowest
- RRP, but the Photo package may be cheaper with discounting .<br>
- <br>
- <span style="font-weight: bold;">Limitations &amp; Features:</span><br>
- <br>
- Unlike the Eye-One Pro, the ColorMunki is only available in a U.V.
- Cut (ie. "Ultra Violet filtered") model. This means that it is not
- suitable for use with the&nbsp; Fluorescent Whitener Additive
- Compensation option in Argyll (see <a href="FWA.html">here</a> for
- a discussion about what FWA compensation is).<br>
- <br>
- Like the Eye-One Pro, this instrument does support the <a
- href="spotread.html#H">high resolution</a> spectral mode.<br>
- <br>
- <span style="font-weight: bold;">OS X and X-Rite drivers</span><br>
- <br>
- Please note the installation <a
- href="Installing_OSX.html#ColorMunki">instructions</a>.<br>
- <br>
- <span style="font-weight: bold;">Tips &amp; Tricks:<br>
- <br>
- </span>In handling the instrument when about to make a reading, be
- very careful not to accidentally press the switch - it is large and
- easily pressed by accident. A guide of some sort (ie. a plastic
- ruler) can help a lot in&nbsp; keeping the instrument over a line
- of&nbsp; patches. <br>
- <br>
- <span style="font-weight: bold;">Patch recognition:</span><br>
- <br>
- For the best chances of good patch recognition, the instrument
- should be drawn smoothly and not too rapidly over the strip. (This
- can be a little tricky due to the two small rubber feet on the
- bottom of the device that aid its spot reading guide.) If there is a
- misread, try slowing down slightly. Generally a higher quality set
- of readings will result if slower scans are used, since there will
- then be more samples averaged for each patch. <br>
- <br>
- In <a href="chartread.html">chartread</a>, the -<span
- style="font-weight: bold;">T ratio</span> argument modifies the
- patch consistency tolerance threshold for the ColorMunki. In
- recognizing patches in a strip, the instrument takes multiple
- readings as the strip is read, and then divide the readings up into
- each patch. It then check the consistency of the multiple readings
- corresponding to each patch, and reject the measurement if they are
- too inconsistent. For some media (ie. a coarser screens, fabric
- etc.) the default tolerance may be unreasonably tight, so the <span
- style="font-weight: bold;">-T ratio</span> argument can be used to
- modify this criteria. To loosen the tolerance, use a number greater
- than 1.0 (ie. 1.5, 2.0). <br>
- <br>
- Note that <a href="printtarg.html">printtarg</a> provides the <a
- href="printtarg.html#h">-h</a> option that allows the choice of
- two different patch row widths with ColorMunki test charts. [Some
- people have successfully used the i1Pro patch layout with the
- ColorMunki, by making a guide to keep it over the much narrower
- patchs.]<br>
- <br>
- <span style="font-weight: bold;"></span><br>
- <span style="font-weight: bold;"><span style="font-weight: bold;"></span></span><span
- style="font-weight: bold;"></span><br>
- <span style="font-weight: bold;"><span style="font-weight: bold;"></span></span>
- <hr style="width: 100%; height: 2px;"><span style="font-weight:
- bold;"><br>
- <a name="DTP20"></a></span><span style="font-weight: bold;">DTP20
- "Pulse" reflective spectrometer<br>
- <br>
- </span><span style="font-weight: bold;"><img title="DTP20" alt=""
- src="DTP20.jpg" style="width: 304px; height: 210px;"><br>
- <br>
- </span><span style="font-weight: bold;">Availability:<br>
- <br>
- </span>The <span style="font-weight: bold;">DTP20</span> from <a
- href="http://www.xrite.com/">X-Rite</a> was discontinued during
- 2007, but may still be available from old stock or second hand. <br>
- <br>
- <span style="font-weight: bold;">Special features:</span><br>
- <br>
- The <span style="font-weight: bold;">DTP20</span> has a couple of
- unique features that Argyll can take advantage of. One is that it
- can operate un-tethered (off line). A whole chart can be read
- un-tethered by first clearing any previous readings in the
- instrument, then reading the chart TID strip, before reading all the
- other strips. The instrument can then be connected up to <span
- style="font-weight: bold;">chartread</span>, which will recognize
- the chart, and download all the measurements.<br>
- If there is no chart in the instrument when chartread connects to
- it, then it will use the strip by strip tethered mode, just like the
- other strip instruments. If the right number of spot readings are
- present in the instrument, these will be used by <span
- style="font-weight: bold;">chartread</span> too.<br>
- <br>
- Un-tethered spot measurements can also be read in using&nbsp; <span
- style="font-weight: bold;">spotread</span>, which will notice the
- stored readings, and offer to print them out, or they can be
- ignored, and tethered readings taken. This will clear any saved spot
- readings.<br>
- <br>
- <span style="font-weight: bold;">Note</span> that tethered (on-line)
- strip reading will only work if the firmware in the device is
- version 1.03 or greater. You can check the firmware version by
- running with the verbose option: <span style="font-weight: bold;">-v<br>
- <br>
- Chart printing:<br>
- <span style="font-weight: bold;"><br>
- </span></span>Because the DTP20 measures exact distances using the
- markings on its ruler, it's critical that the chart be printed out
- exactly the right size. If the chart gets re-sized at all in the
- process of printing it, the DTP20 is likely to fail in reading it.
- If you have a problem with this, you might want to increase the page
- margins using the <span style="font-weight: bold;">printtarg -m</span>
- parameter, or find a printing path that preserves the test chart
- size correctly.<br>
- <br>
- <span style="font-weight: bold;"><span style="font-weight: bold;"></span></span><span
- style="font-weight: bold;">Operation:<br>
- <br>
- </span>When reading in tethered (on-line) mode, that the instrument
- takes <span style="font-weight: bold;">several seconds</span> to
- download the measurements after each strip, and that the indicator
- will be in "rainbow" mode while this occurs. <span
- style="text-decoration: underline;">Wait</span> until the
- indicator turns solid green again before starting to measure the
- next strip.<br>
- <br>
- To <span style="font-weight: bold;">reset</span> the instrument and
- clear any stored readings: press the button three times in quick
- succession. The indicator will turn solid blue. Then hold the button
- down until the instrument beeps and the indicator goes out. Release
- the button and the indicator should flash then return to solid green
- (ready).<br>
- <br>
- To <span style="font-weight: bold;">calibrate</span> the
- instrument, place it on its calibration tile, then press the button
- three times in quick succession.The indicator will turn solid blue.
- Click the button another three times in quick succession, and the
- indicator should turn yellow. Then hold the button down until the
- instrument beeps and the indicator goes out. Release the button and
- the instrument should flash and then turn solid green.<br>
- <br>
- If the chart is particularly <span style="font-weight: bold;">small</span>,
- the patches may end up printed very close to the edge of the chart,
- and therefore it may be difficult to confine your scan to the chart,
- and passing<br>
- the instrument over the edge of the chart may prevent it reading
- successfully. One way of working around this is to place the chart
- on a larger piece of paper of the same type.<br>
- <br>
- The <span style="font-weight: bold;">speed</span> of scan can be
- quite critical with this instrument. In particular, it doesn't work
- very well if the scan is too <span style="font-weight: bold;">slow</span>.
- You don't want to go too fast either, as this reduces the number of
- samples per patch.<br>
- <br>
- <span style="font-weight: bold;"><span style="font-weight: bold;"></span></span><span
- style="font-weight: bold;"></span><br>
- <span style="font-weight: bold;"><span style="font-weight: bold;"></span></span>
- <hr style="width: 100%; height: 2px;"><span style="font-weight:
- bold;"><br>
- <a name="DTP22"></a></span><span style="font-weight: bold;">DTP22
- Digital Swatchbook reflective spectrometer</span><br>
- <span style="font-weight: bold;"><br>
- <img alt="" src="DTP22.jpg" style="width: 222px; height: 193px;"><br>
- <br>
- </span><span style="font-weight: bold;">Availability:<br>
- <br>
- </span>The <span style="font-weight: bold;">DTP22</span> from <a
- href="http://www.xrite.com/">X-Rite</a> is a discontinued
- instrument.&nbsp; It may still be available second hand. It is
- capable of reading colored patches one at a time.<br>
- <br>
- <br>
- <span style="font-weight: bold;"><span style="font-weight: bold;"></span></span>
- <hr style="width: 100%; height: 2px;"><span style="font-weight:
- bold;"><br>
- <a name="DTP41"></a>DTP41 reflective, DTP41T
- reflective/transmissive spectrometers<br>
- <br>
- <img alt="" src="DTP41.jpg" style="width: 263px; height: 298px;"><br>
- <br>
- </span><span style="font-weight: bold;">Availability:<br>
- <br>
- </span>The <span style="font-weight: bold;">DTP41</span> and <span
- style="font-weight: bold;">DTP41T</span> from <a
- href="http://www.xrite.com/">X-Rite</a> is a discontinued
- instrument.&nbsp; It may still be available second hand. <br>
- <br>
- The series II instruments (<span style="font-weight: bold;">DTP41B</span>
- and <span style="font-weight: bold;">DTP41TB</span>) offer both
- serial and USB connection. Note that currently only serial operation
- using Argyll is possible with these instruments.<br>
- <br>
- <hr style="width: 100%; height: 2px;"><br>
- <a name="dtp51"></a><span style="font-weight: bold;">DTP51
- reflective colorimeter<br>
- <br>
- <img alt="" src="DTP51.jpg" style="width: 263px; height: 223px;"><br>
- <br>
- </span><span style="font-weight: bold;">Availability:<br>
- <br>
- </span>The <span style="font-weight: bold;">DTP51</span> from <a
- href="http://www.xrite.com/">X-Rite</a> is a discontinued
- instrument.&nbsp; It may still be available second hand. <br>
- <br>
- <span style="font-weight: bold;">Operation:</span><br>
- <span style="font-weight: bold;"><span style="font-weight: bold;"><br>
- </span></span>The DTP51's switch is triggered by inserting a strip
- into the slot.<br>
- <br>
- <br>
- <span style="font-weight: bold;"><span style="font-weight: bold;"></span></span>
- <hr style="width: 100%; height: 2px;"><span style="font-weight:
- bold;"><br>
- <a name="DTP92"></a>DTP92 CRT display colorimeter<br>
- <br>
- <img alt="" src="DTP92.jpg" style="width: 223px; height: 180px;"><br>
- <br>
- </span><span style="font-weight: bold;">Availability:<br>
- <br>
- </span>The <span style="font-weight: bold;">DTP92</span><span
- style="font-weight: bold;"></span> from <a
- href="http://www.xrite.com/">X-Rite</a> is a discontinued
- instrument.&nbsp; It may still be available second hand. It will
- only read CRT technology displays.<br>
- <br>
- <span style="font-weight: bold;">Operation:</span><br>
- <br>
- The Display Selections for this instrument are:<br>
- <br>
+
+
+
+
+
+
+
+
+
+
+
+
+ type</span> selection parameter. Depending on the instrument, this
+ may combine two related functions: 1) Changing the measurement mode
+ to suite either refresh-type, or non-refresh displays, and 2)
+ Changing the calibration to suite a particular displays spectral
+ characteristics.<br>
+ <br>
+ A refresh type display uses a technology that presents different
+ portions of the image at different times, doing so at a high enough
+ rate that this is normally imperceptible. This time varying
+ characteristic can interfere with measuring a display color unless
+ the instrument makes allowances for it, typically by making its
+ measurement period a multiple of the display refresh period. Display
+ types that <span style="font-weight: bold;">refresh</span> are CRT
+ (Cathode Ray Tube), Single chip DLP (Digital Light Processing) and
+ Plasma displays. An example of a <span style="font-weight: bold;">non-refresh</span>
+ display technology is LCD (Liquid Crystal Display), although is a
+ few cases the back-light illumination may have a low enough
+ frequency flicker to benefit from the refresh mode.<br>
+ <br>
+ Instruments in which the display type selection only changes the
+ measurement mode (i.e. i1d3), will typically have some other
+ independent option to set the calibration type. Simpler instruments
+ combine the measurement mode with a calibration selections,
+ typically refresh+CRT and non-refresh+LCD. Some instruments are a
+ hybrid of both (Spyder4), where the display type can select between
+ generic refresh/non-refresh that can then use a .CCSS to set the
+ calibration type, or a combined selection of non-refresh and a
+ particular display type.<br>
+ <br>
+ See <a
+ href="http://en.wikipedia.org/wiki/Comparison_of_display_technology">Comparison_of_display_technology</a>
+ for some background on different display technologies.<br>
+ <br>
+ <hr size="2" width="100%"><br>
+ <h3><a name="refreshmeasurement"></a>Refresh Rate Measurement</h3>
+ <p>Most of the colorimeters that have a refresh display type
+ selection, also have an ability to measure the refresh rate of a
+ display. Some of the spectrometers also have a display refresh
+ rate measurement capability when in an emissive measurement mode,
+ even though they don't use this to support a refresh display mode.
+ You can do a display refresh rate measurement in <a
+ href="spotread.html">spotread</a> using the <b>'F' </b>key.
+ The particular instruments have a range of accuracy when making
+ this measurement. A rough guide is as follows:<br>
+ <br>
+ </p>
+ <table border="1" height="230" width="372" cellpadding="2"
+ cellspacing="2">
+ <tbody>
+ <tr>
+ <td valign="top"><b>Instrument</b></td>
+ <td valign="top"><b>Typical error in Hz.</b></td>
+ </tr>
+ <tr>
+ <td valign="top">spectrobos 1211/1201<br>
+ </td>
+ <td valign="top">0.05<br>
+ </td>
+ </tr>
+ <tr>
+ <td valign="top">DTP92<br>
+ </td>
+ <td valign="top">0.1<br>
+ </td>
+ </tr>
+ <tr>
+ <td valign="top">i1 Display 2<br>
+ </td>
+ <td valign="top">0.5<br>
+ </td>
+ </tr>
+ <tr>
+ <td valign="top">Spyder 2<br>
+ </td>
+ <td valign="top">0.7<br>
+ </td>
+ </tr>
+ <tr>
+ <td valign="top">Spyder 3<br>
+ </td>
+ <td valign="top">3<br>
+ </td>
+ </tr>
+ <tr>
+ <td valign="top">Spyder 4<br>
+ </td>
+ <td valign="top">3<br>
+ </td>
+ </tr>
+ <tr>
+ <td valign="top">i1 Display Pro<br>
+ </td>
+ <td valign="top">0.05<br>
+ </td>
+ </tr>
+ <tr>
+ <td valign="top">i1 Pro Spectro.<br>
+ </td>
+ <td valign="top">0.05<br>
+ </td>
+ </tr>
+ <tr>
+ <td valign="top">ColorMunki Spectro.<br>
+ </td>
+ <td valign="top">0.05<br>
+ </td>
+ </tr>
+ </tbody>
+ </table>
+ <p><br>
+ </p>
+ <hr size="2" width="100%">
+ <p><span style="font-weight: bold;"><a name="specbos"></a><span
+ style="font-weight: bold;">specbos 1211 and 1201
+ Tele-Spectro-Radiometer<br>
+ </span></span></p>
+ <img alt="JETI specbos 1211" src="JETI_1211.jpg" height="210"
+ width="211">
+ <p><span style="font-weight: bold;"><br>
+ </span><span style="font-weight: bold;">Availability:<br>
+ <br>
+ </span>The <span style="font-weight: bold;">specbos 1211</span><span
+ style="font-weight: bold;"> </span>and <b>1201</b>from <a
+ href="http://www.jeti.com/">JETI</a>&nbsp; are currently
+ available instruments. These are reference grade instruments
+ capable of emissive and ambient measurements, and are often used
+ for monitor, projector and cinema calibration and
+ characterization, amongst many other uses.<br>
+ </p>
+ <hr size="2" width="100%">
+ <p><br>
+ </p>
+ <span style="font-weight: bold;"></span><br>
+ <span style="font-weight: bold;"><a name="ColorMunki"></a><span
+ style="font-weight: bold;">ColorMunki </span>Design or Photo <span
+ style="font-weight: bold;">reflective/emissive spectrometer</span><br>
+ <br>
+ <img style="width: 272px; height: 243px;" alt="" title="ColorMunki
+ (White)" src="ColorMunki.jpg">&nbsp;&nbsp; <br>
+ <br>
+ </span><span style="font-weight: bold;">Availability:<br>
+ <br>
+ </span>The <span style="font-weight: bold;">ColorMunki</span> <span
+ style="font-weight: bold;">Design or Photo </span>from <a
+ href="http://www.xrite.com/">X-Rite</a>&nbsp; is currently
+ available in two different packages from the manufacturer. These
+ packages differ in what features the manufacturers software
+ provides, as well as cosmetic differences between the instrument
+ (white and black). This comparison <a
+ href="http://www.colormunki.com/product/show?page=2">chart</a>
+ illustrates the differences. Used with Argyll, there are no
+ differences in operation of a ColorMunki instrument, irrespective of
+ which package it came with. The ColorMunki Design has the lowest
+ RRP, but the Photo package may be cheaper with discounting .<br>
+ <br>
+ <span style="font-weight: bold;">Limitations &amp; Features:</span><br>
+ <br>
+ Unlike the Eye-One Pro, the ColorMunki is only available in a U.V.
+ Cut (ie. "Ultra Violet filtered") model. This means that it is not
+ suitable for use with the&nbsp; Fluorescent Whitener Additive
+ Compensation option in Argyll (see <a href="FWA.html">here</a> for
+ a discussion about what FWA compensation is).<br>
+ <br>
+ Like the Eye-One Pro, this instrument does support the <a
+ href="spotread.html#H">high resolution</a> spectral mode.<br>
+ <br>
+ <span style="font-weight: bold;">OS X and X-Rite drivers</span><br>
+ <br>
+ Please note the installation <a
+ href="Installing_OSX.html#ColorMunki">instructions</a>.<br>
+ <br>
+ <span style="font-weight: bold;">Tips &amp; Tricks:<br>
+ <br>
+ </span>In handling the instrument when about to make a reading, be
+ very careful not to accidentally press the switch - it is large and
+ easily pressed by accident. A guide of some sort (ie. a plastic
+ ruler) can help a lot in&nbsp; keeping the instrument over a line
+ of&nbsp; patches. <br>
+ <br>
+ <span style="font-weight: bold;">Patch recognition:</span><br>
+ <br>
+ For the best chances of good patch recognition, the instrument
+ should be drawn smoothly and not too rapidly over the strip. (This
+ can be a little tricky due to the two small rubber feet on the
+ bottom of the device that aid its spot reading guide.) If there is a
+ misread, try slowing down slightly. Generally a higher quality set
+ of readings will result if slower scans are used, since there will
+ then be more samples averaged for each patch. <br>
+ <br>
+ In <a href="chartread.html">chartread</a>, the -<span
+ style="font-weight: bold;">T ratio</span> argument modifies the
+ patch consistency tolerance threshold for the ColorMunki. In
+ recognizing patches in a strip, the instrument takes multiple
+ readings as the strip is read, and then divide the readings up into
+ each patch. It then check the consistency of the multiple readings
+ corresponding to each patch, and reject the measurement if they are
+ too inconsistent. For some media (ie. a coarser screens, fabric
+ etc.) the default tolerance may be unreasonably tight, so the <span
+ style="font-weight: bold;">-T ratio</span> argument can be used to
+ modify this criteria. To loosen the tolerance, use a number greater
+ than 1.0 (ie. 1.5, 2.0). <br>
+ <br>
+ Note that <a href="printtarg.html">printtarg</a> provides the <a
+ href="printtarg.html#h">-h</a> option that allows the choice of
+ two different patch row widths with ColorMunki test charts. [Some
+ people have successfully used the i1Pro patch layout with the
+ ColorMunki, by making a guide to keep it over the much narrower
+ patchs.]<br>
+ <br>
+ <span style="font-weight: bold;"></span><br>
+ <span style="font-weight: bold;"><span style="font-weight: bold;"></span></span><span
+ style="font-weight: bold;"></span><br>
+ <span style="font-weight: bold;"><span style="font-weight: bold;"></span></span>
+ <hr style="width: 100%; height: 2px;"><span style="font-weight:
+ bold;"><br>
+ <a name="DTP20"></a></span><span style="font-weight: bold;">DTP20
+ "Pulse" reflective spectrometer<br>
+ <br>
+ </span><span style="font-weight: bold;"><img title="DTP20" alt=""
+ src="DTP20.jpg" style="width: 304px; height: 210px;"><br>
+ <br>
+ </span><span style="font-weight: bold;">Availability:<br>
+ <br>
+ </span>The <span style="font-weight: bold;">DTP20</span> from <a
+ href="http://www.xrite.com/">X-Rite</a> was discontinued during
+ 2007, but may still be available from old stock or second hand. <br>
+ <br>
+ <span style="font-weight: bold;">Special features:</span><br>
+ <br>
+ The <span style="font-weight: bold;">DTP20</span> has a couple of
+ unique features that Argyll can take advantage of. One is that it
+ can operate un-tethered (off line). A whole chart can be read
+ un-tethered by first clearing any previous readings in the
+ instrument, then reading the chart TID strip, before reading all the
+ other strips. The instrument can then be connected up to <span
+ style="font-weight: bold;">chartread</span>, which will recognize
+ the chart, and download all the measurements.<br>
+ If there is no chart in the instrument when chartread connects to
+ it, then it will use the strip by strip tethered mode, just like the
+ other strip instruments. If the right number of spot readings are
+ present in the instrument, these will be used by <span
+ style="font-weight: bold;">chartread</span> too.<br>
+ <br>
+ Un-tethered spot measurements can also be read in using&nbsp; <span
+ style="font-weight: bold;">spotread</span>, which will notice the
+ stored readings, and offer to print them out, or they can be
+ ignored, and tethered readings taken. This will clear any saved spot
+ readings.<br>
+ <br>
+ <span style="font-weight: bold;">Note</span> that tethered (on-line)
+ strip reading will only work if the firmware in the device is
+ version 1.03 or greater. You can check the firmware version by
+ running with the verbose option: <span style="font-weight: bold;">-v<br>
+ <br>
+ Chart printing:<br>
+ <span style="font-weight: bold;"><br>
+ </span></span>Because the DTP20 measures exact distances using the
+ markings on its ruler, it's critical that the chart be printed out
+ exactly the right size. If the chart gets re-sized at all in the
+ process of printing it, the DTP20 is likely to fail in reading it.
+ If you have a problem with this, you might want to increase the page
+ margins using the <span style="font-weight: bold;">printtarg -m</span>
+ parameter, or find a printing path that preserves the test chart
+ size correctly.<br>
+ <br>
+ <span style="font-weight: bold;"><span style="font-weight: bold;"></span></span><span
+ style="font-weight: bold;">Operation:<br>
+ <br>
+ </span>When reading in tethered (on-line) mode, that the instrument
+ takes <span style="font-weight: bold;">several seconds</span> to
+ download the measurements after each strip, and that the indicator
+ will be in "rainbow" mode while this occurs. <span
+ style="text-decoration: underline;">Wait</span> until the
+ indicator turns solid green again before starting to measure the
+ next strip.<br>
+ <br>
+ To <span style="font-weight: bold;">reset</span> the instrument and
+ clear any stored readings: press the button three times in quick
+ succession. The indicator will turn solid blue. Then hold the button
+ down until the instrument beeps and the indicator goes out. Release
+ the button and the indicator should flash then return to solid green
+ (ready).<br>
+ <br>
+ To <span style="font-weight: bold;">calibrate</span> the
+ instrument, place it on its calibration tile, then press the button
+ three times in quick succession.The indicator will turn solid blue.
+ Click the button another three times in quick succession, and the
+ indicator should turn yellow. Then hold the button down until the
+ instrument beeps and the indicator goes out. Release the button and
+ the instrument should flash and then turn solid green.<br>
+ <br>
+ If the chart is particularly <span style="font-weight: bold;">small</span>,
+ the patches may end up printed very close to the edge of the chart,
+ and therefore it may be difficult to confine your scan to the chart,
+ and passing<br>
+ the instrument over the edge of the chart may prevent it reading
+ successfully. One way of working around this is to place the chart
+ on a larger piece of paper of the same type.<br>
+ <br>
+ The <span style="font-weight: bold;">speed</span> of scan can be
+ quite critical with this instrument. In particular, it doesn't work
+ very well if the scan is too <span style="font-weight: bold;">slow</span>.
+ You don't want to go too fast either, as this reduces the number of
+ samples per patch.<br>
+ <br>
+ <span style="font-weight: bold;"><span style="font-weight: bold;"></span></span><span
+ style="font-weight: bold;"></span><br>
+ <span style="font-weight: bold;"><span style="font-weight: bold;"></span></span>
+ <hr style="width: 100%; height: 2px;"><span style="font-weight:
+ bold;"><br>
+ <a name="DTP22"></a></span><span style="font-weight: bold;">DTP22
+ Digital Swatchbook reflective spectrometer</span><br>
+ <span style="font-weight: bold;"><br>
+ <img alt="" src="DTP22.jpg" style="width: 222px; height: 193px;"><br>
+ <br>
+ </span><span style="font-weight: bold;">Availability:<br>
+ <br>
+ </span>The <span style="font-weight: bold;">DTP22</span> from <a
+ href="http://www.xrite.com/">X-Rite</a> is a discontinued
+ instrument.&nbsp; It may still be available second hand. It is
+ capable of reading colored patches one at a time.<br>
+ <br>
+ <br>
+ <span style="font-weight: bold;"><span style="font-weight: bold;"></span></span>
+ <hr style="width: 100%; height: 2px;"><span style="font-weight:
+ bold;"><br>
+ <a name="DTP41"></a>DTP41 reflective, DTP41T
+ reflective/transmissive spectrometers<br>
+ <br>
+ <img alt="" src="DTP41.jpg" style="width: 263px; height: 298px;"><br>
+ <br>
+ </span><span style="font-weight: bold;">Availability:<br>
+ <br>
+ </span>The <span style="font-weight: bold;">DTP41</span> and <span
+ style="font-weight: bold;">DTP41T</span> from <a
+ href="http://www.xrite.com/">X-Rite</a> is a discontinued
+ instrument.&nbsp; It may still be available second hand. <br>
+ <br>
+ The series II instruments (<span style="font-weight: bold;">DTP41B</span>
+ and <span style="font-weight: bold;">DTP41TB</span>) offer both
+ serial and USB connection. Note that currently only serial operation
+ using Argyll is possible with these instruments.<br>
+ <br>
+ <hr style="width: 100%; height: 2px;"><br>
+ <a name="dtp51"></a><span style="font-weight: bold;">DTP51
+ reflective colorimeter<br>
+ <br>
+ <img alt="" src="DTP51.jpg" style="width: 263px; height: 223px;"><br>
+ <br>
+ </span><span style="font-weight: bold;">Availability:<br>
+ <br>
+ </span>The <span style="font-weight: bold;">DTP51</span> from <a
+ href="http://www.xrite.com/">X-Rite</a> is a discontinued
+ instrument.&nbsp; It may still be available second hand. <br>
+ <br>
+ <span style="font-weight: bold;">Operation:</span><br>
+ <span style="font-weight: bold;"><span style="font-weight: bold;"><br>
+ </span></span>The DTP51's switch is triggered by inserting a strip
+ into the slot.<br>
+ <br>
+ <br>
+ <span style="font-weight: bold;"><span style="font-weight: bold;"></span></span>
+ <hr style="width: 100%; height: 2px;"><span style="font-weight:
+ bold;"><br>
+ <a name="DTP92"></a>DTP92 CRT display colorimeter<br>
+ <br>
+ <img alt="" src="DTP92.jpg" style="width: 223px; height: 180px;"><br>
+ <br>
+ </span><span style="font-weight: bold;">Availability:<br>
+ <br>
+ </span>The <span style="font-weight: bold;">DTP92</span><span
+ style="font-weight: bold;"></span> from <a
+ href="http://www.xrite.com/">X-Rite</a> is a discontinued
+ instrument.&nbsp; It may still be available second hand. It will
+ only read CRT technology displays.<br>
+ <br>
+ <span style="font-weight: bold;">Operation:</span><br>
+ <br>
+ The Display Selections for this instrument are:<br>
+ <br>
&nbsp;&nbsp;&nbsp; <span style="font-weight: bold;">c</span>&nbsp;&nbsp;&nbsp;
@@ -1156,32 +1351,44 @@
- CRT display&nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;&nbsp; A Cathode Ray
- Tube display, that is of the Refresh type [Default, CB2].<br>
- <br>
- <hr style="width: 100%; height: 2px;"><br>
- <span style="font-weight: bold;"><a name="DTP94"></a>DTP94, </span><font
- size="-1">"Optix XR"</font> or "Optix XR2" or "Optix Pro" <span
- style="font-weight: bold;">display colorimetrers</span><br>
- <span style="font-weight: bold;"><br>
- <img title="DTP94" alt="" src="DTP94.jpg" style="width: 138px;
- height: 171px;"> &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;
- &nbsp; &nbsp; <img alt="" title="Optix XR/Pro" src="moxxr.jpg"
- style="width: 155px; height: 190px;"><br>
- <br>
- </span><span style="font-weight: bold;">Availability:<br>
- <br>
- </span>The <span style="font-weight: bold;">DTP94 </span>from <a
- href="http://www.xrite.com/">X-Rite</a> is a discontinued
- instrument, although it is still being supplied to OEMs.&nbsp; It
- may still be available as old stock, or second hand. It was sold as
- an instrument without software as the DTP94, and packaged with
- software from the manufacturer as the "Optix XR" range.<br>
- <br>
- <span style="font-weight: bold;">Operation:</span><br>
- <br>
- The Display Selections for this instrument are:<br>
- <br>
+
+
+
+
+
+
+
+
+
+
+
+
+ CRT display&nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;&nbsp; A Cathode Ray
+ Tube display, that is of the Refresh type [Default, CB2].<br>
+ <br>
+ <hr style="width: 100%; height: 2px;"><br>
+ <span style="font-weight: bold;"><a name="DTP94"></a>DTP94, </span><font
+ size="-1">"Optix XR"</font> or "Optix XR2" or "Optix Pro" <span
+ style="font-weight: bold;">display colorimetrers</span><br>
+ <span style="font-weight: bold;"><br>
+ <img title="DTP94" alt="" src="DTP94.jpg" style="width: 138px;
+ height: 171px;"> &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;
+ &nbsp; &nbsp; <img alt="" title="Optix XR/Pro" src="moxxr.jpg"
+ style="width: 155px; height: 190px;"><br>
+ <br>
+ </span><span style="font-weight: bold;">Availability:<br>
+ <br>
+ </span>The <span style="font-weight: bold;">DTP94 </span>from <a
+ href="http://www.xrite.com/">X-Rite</a> is a discontinued
+ instrument, although it is still being supplied to OEMs.&nbsp; It
+ may still be available as old stock, or second hand. It was sold as
+ an instrument without software as the DTP94, and packaged with
+ software from the manufacturer as the "Optix XR" range.<br>
+ <br>
+ <span style="font-weight: bold;">Operation:</span><br>
+ <br>
+ The Display Selections for this instrument are:<br>
+ <br>
&nbsp;&nbsp;&nbsp; <span style="font-weight: bold;">l</span>&nbsp;&nbsp;&nbsp;&nbsp;
@@ -1199,8 +1406,20 @@
- LCD display&nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;&nbsp; A Liquid
- Crystal Display, that is of the Non-Refresh type [default, CB1].<br>
+
+
+
+
+
+
+
+
+
+
+
+
+ LCD display&nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;&nbsp; A Liquid
+ Crystal Display, that is of the Non-Refresh type [default, CB1].<br>
&nbsp;&nbsp;&nbsp; <span style="font-weight: bold;">c</span>&nbsp;&nbsp;&nbsp;
@@ -1223,23 +1442,35 @@
- CRT display&nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;&nbsp; A Cathode Ray
- Tube display, that is of the Refresh type [CB2].<br>
- &nbsp;&nbsp;&nbsp; <b>g</b>&nbsp;&nbsp;&nbsp;
- Generic&nbsp;&nbsp;&nbsp;
- &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Generic
- display [CB3]<br>
- &nbsp;&nbsp; <br>
- <br>
- <span style="font-weight: bold;"></span>
- <hr style="width: 100%; height: 2px;"><span style="font-weight:
- bold;"><br>
- <a name="sl"></a>Spectrolino reflective/emissive spectrometer<br>
- <br>
- <img alt="" src="sl.jpg" style="width: 239px; height: 200px;"><br>
- <br>
- </span><span style="font-weight: bold;">Availability:<br>
- <br>
+
+
+
+
+
+
+
+
+
+
+
+
+ CRT display&nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;&nbsp; A Cathode Ray
+ Tube display, that is of the Refresh type [CB2].<br>
+ &nbsp;&nbsp;&nbsp; <b>g</b>&nbsp;&nbsp;&nbsp;
+ Generic&nbsp;&nbsp;&nbsp;
+ &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Generic
+ display [CB3]<br>
+ &nbsp;&nbsp; <br>
+ <br>
+ <span style="font-weight: bold;"></span>
+ <hr style="width: 100%; height: 2px;"><span style="font-weight:
+ bold;"><br>
+ <a name="sl"></a>Spectrolino reflective/emissive spectrometer<br>
+ <br>
+ <img alt="" src="sl.jpg" style="width: 239px; height: 200px;"><br>
+ <br>
+ </span><span style="font-weight: bold;">Availability:<br>
+ <br>
</span>The <span style="font-weight: bold;">Spectrolino </span>from
Gretag
@@ -1263,220 +1494,237 @@ Gretag
- MacBeth (Now X-Rite) is a discontinued instrument. It is often
- available second hand. If buying it second hand, make sure it comes
- with all it's accessories, including white reference, spot reading
- adapter, display reading adapters, filters (UV, polarizing, D65),
- serial cable adapter and power supply.<br>
- <span style="font-weight: bold;"><br>
- </span>
- <hr style="width: 100%; height: 2px;"><span style="font-weight:
- bold;"><br>
- <a name="ss"></a>SpectroScan reflective/emissive and SpectroScanT
- reflective/emissive/transmissive spectrometers<br>
- <br>
- <img style="width: 336px; height: 294px;" alt="" src="ss.jpg"><br>
- <br>
- </span><span style="font-weight: bold;">Availability:<br>
- <br>
- </span>The <span style="font-weight: bold;">SpectroScan</span> and
- <span style="font-weight: bold;">SpectroScanT</span> from Gretag
- MacBeth (Now X-Rite) is a discontinued instrument. It is the
- combination of an X-Y table and the <span style="font-weight:
- bold;">Spectrolino</span> instrument. The <span
- style="font-weight: bold;">SpectroScanT</span> is capable of
- measuring transparency. It is often available second hand. If buying
- it second hand, make sure it comes with all it's accessories,
- including white reference, spot reading adapter, display reading
- adapters, filters (UV, polarizing, D65) and power supply.<br>
- <br>
- If measuring transparencies using a SpectroScanT, the <b>Enter</b>
- key on the instrument may be used to trigger each reading. It will
- be recognized after each previous reading has been completed.<br>
- <br>
- <hr style="width: 100%; height: 2px;"><br>
- <br>
- <span style="font-weight: bold;"><a name="i1p2"></a>Eye-One Pro2:</span><br>
- <img style=" width: 357px; height: 234px;" alt="Eye-One Pro 2"
- src="i1pro2.jpg"><br>
- <br>
- There is support for some of the new features of the Eye-One Pro2
- (also known as the Eye-One Pro Rev E), in particular the&nbsp; Rev E
- measurement mode, spectrometer stray light reduction, wavelength
- calibration, and improved black level tracking. This new support can
- be disabled and an Eye-One Pro2 operated in legacy mode by setting
- the environment variable ARGYLL_DISABLE_I1PRO2_DRIVER. See <a
- href="file:///D:/src/argyll/doc/instruments.html#i1p">Eye-One Pro
- reflective/emissive spectrometer</a><span style="font-weight:
- bold;"> </span>below for details on the operation of this type of
- instrument.<br>
- <br>
- <hr style="width: 100%; height: 2px;"><br>
- <span style="font-weight: bold;"><a name="i1p"></a>Eye-One Pro and
- Eye-One Pro2 reflective/emissive spectrometer<br>
- <br>
- <img alt="" src="i1p.jpg" style="width: 347px; height: 234px;"><br>
- <br>
- </span><span style="font-weight: bold;">Availability:<br>
- <br>
- </span>The <span style="font-weight: bold;">Eye-One Pro</span> from
- <a href="http://www.xrite.com/">X-Rite</a> (was Gretag MacBeth) is
- available in two packages from the manufacturer. These packages
- differ partly in what accessories come with the instrument, but
- primarily in what features the manufacturers software provides. This
- comparison <a
- href="http://www.xrite.com/product_overview.aspx?ID=812">chart</a>
- illustrates the differences. Used with Argyll, there are no
- differences in operation of an Eye-One Pro instrument, irrespective
- of which package it came with. The lowest cost package is the <a
- href="http://www.xrite.com/product_overview.aspx?ID=1461">i1 Basic
- Pro</a>.<br>
- <br>
- The EFI ES-1000 (which is a re-badged Eye-One Pro) is also reported
- to work with Argyll.<br>
- <br>
- Unless you know what you're doing, and have a very specific reason
- to buy an instrument fitted with a UV (Ultra Violet) filter, make
- sure that you buy an instrument without the filter. A UV filtered
- instrument can't deal intelligently with FWA (Fluorescent Whitener
- Additive) effects in paper. (Look <a href="FWA.html">here</a> for
- more information about FWA compensation.) Using FWA compensation you
- can make measurements using ISO 13655:2009 M0, M1 and M2 conditions.
- The M2 condition emulates a UV cut instrument.<br>
- <br>
- There have been four revisions of the Eye-One Pro, Rev. A, B, D and
- E (AKA Eye-One Pro2). The rev B, D and E are capable of sampling
- twice as fast as the Rev. A version of the instrument, and are also
- available with an ambient light reading capability.<br>
- <br>
- <span style="font-weight: bold;">NOTE</span> for those running on
- older versions of Linux with a Rev. D, there was a problem with the
- Linux USB stack that causes the instrument to stop working once it
- has been used. The only workaround is to unplug and replug the
- instrument in again, whereupon it can be used one time again. A fix
- for this problem was in the&nbsp; Linux 2.6.26 kernel release.<br>
- <br>
- See also <a href="i1proDriver.html">How can I have confidence in
- the i1pro Driver ?</a><br>
- <br>
- <span style="font-weight: bold;">Patch recognition:</span><br>
- <br>
- For the best chances of good patch recognition, the instrument
- should be drawn smoothly and not too rapidly over the strip. If
- there is a misread, try slowing down slightly. The Rev A and B.
- instruments have a slower sampling rate than the latter revision
- instruments, and hence must be used a bit more slowly. Generally a
- higher quality set of readings will result if slower scans are used,
- since there will then be more samples averaged for each patch.<br>
- <br>
- In <a href="chartread.html">chartread</a>, the -<span
- style="font-weight: bold;">T ratio</span> argument modifies the
- patch consistency tolerance threshold for the Eye-One Pro. In
- recognizing patches in a strip, the instrument takes multiple
- readings as the strip is read, and then divide the readings up into
- each patch. It then check the consistency of the multiple readings
- corresponding to each patch, and reject the measurement if they are
- too inconsistent. For some media (ie. a coarser screens, fabric
- etc.) the default tolerance may be unreasonably tight, so the <span
- style="font-weight: bold;">-T ratio</span> argument can be used to
- modify this criteria. To loosen the tolerance, use a number greater
- than 1.0 (ie. 1.5, 2.0). <span style="font-weight: bold;"></span><br>
- <br>
- <span style="font-weight: bold;">Special features:</span><br>
- <br>
- A feature unique to Argyll when used with the Eye-One Pro, is the
- high resolution spectral mode. This returns spectral measurements at
- 3.333 nm spacing, rather than the default 10nm spacing, and also
- extends the range of wavelengths very slightly. This high resolution
- may assist in giving better accuracy for "peaky" emissive sources
- such as illuminants and displays. The high resolution mode is
- selected by using the <span style="font-weight: bold;">-H</span>
- flag on the command line to <span style="font-weight: bold;">dispcal</span>,
- <span style="font-weight: bold;">dispread</span>, <span
- style="font-weight: bold;">chartread</span>, and <span
- style="font-weight: bold;">spotread</span>. It can also be toggled
- on and off within <span style="font-weight: bold;">spotread</span>
- using the <span style="font-weight: bold;">h</span> key. The
- extended range down to 350nm may give some information about an
- illuminants ultra violet content, although the accuracy of the
- readings between 350-380, and 730-740nm should not be relied upon.<br>
- <br>
- <img alt="High res. and standard res. spectrum."
- src="Fluorescent.jpg" style="width: 750px; height: 375px;"><br>
- <br>
- <img alt="C.R.T high res. and standard res. spectrum."
- src="CRTspectrum.jpg" style="width: 750px; height: 375px;"><br>
- <br>
- <hr style="width: 100%; height: 2px;"><br>
- <span style="font-weight: bold;"><a name="i1m"></a>Eye-One Monitor
- emissive spectrometer<br>
- <br>
- <img alt="" src="i1m.jpg" style="width: 347px; height: 234px;"><br>
- <br>
- </span><span style="font-weight: bold;">Availability:<br>
- <br>
- </span>The <span style="font-weight: bold;">Eye-One Monitor</span>
- from <a href="http://www.xrite.com/">X-Rite</a> (was Gretag
- MacBeth) is a discontinued instrument. It was a lower cost version
- of the <span style="font-weight: bold;">Eye-One Pro</span> without
- reflective measurement capability. See <a href="#i1p">Eye-One Pro
- reflective/emissive spectrometer</a><span style="font-weight:
- bold;"> </span>for details on the operation of this instrument.<br>
- <br>
- <br>
- <hr style="width: 100%; height: 2px;"><br>
- <span style="font-weight: bold;"><a name="i1d"></a>Eye-One Display
- 1, Eye-One Display 2, Eye-One Display LT, ColorMunki Create,
- ColorMunki Smile colorimeters,<br>
- <br>
- <img style=" width: 124px; height: 168px;" alt="ColorMunki Smile"
- src="Smile.jpg"><img alt="Eye-One Display 2" src="i1d.jpg"
- style="width: 145px; height: 168px;"> <img style="width: 133px;
- height: 168px;" alt="ColorMunki Create"
- src="ColorMunkiCreate.jpg"><br>
- <br>
- Instrument Availability:<br>
- <br>
- </span>The <span style="font-weight: bold;">ColorMunki Smile</span>
- colorimeter is a currently available instrument.<br>
- The <span style="font-weight: bold;">Eye-One Display LT</span> and
- <span style="font-weight: bold;">Eye-One Display 2</span> are
- discontinued products, although they may still be available from
- some retailers, second hand, and may still be shipped with some
- displays as part of their calibration capability.<br>
- The <span style="font-weight: bold;">ColorMunki Create</span>
- colorimeter is a discontinued product, although they may still be
- available from some retailers or second hand,can also be used. They
- will appear as an i1Display2 colorimeter.<br>
- The <span style="font-weight: bold;">HP DreamColor</span>
- colorimeter can also be used, and will appear as an i1Display2
- colorimeter [note that it is calibrated for the DreamColor display].<br>
- The <span style="font-weight: bold;">HP APS</span> (Advanced
- Profiling Solution) colorimeter is also reported to work, and will
- appear as an i1Display2.<br>
- The <span style="font-weight: bold;">CalMAN X2</span> colorimeter
- is also reported to work, and will appear as an i1Display2
- colorimeter.<br>
- The&nbsp; <span style="font-weight: bold;">Lacie Blue Eye</span> <span
- style="font-weight: bold;"></span> colorimeter is also reported to
- work, and will appear as an i1Display2 colorimeter.<br>
- <br>
- <span style="font-weight: bold;"></span>The <span
- style="font-weight: bold;">Eye-One Display 1</span> is a
- discontinued instrument. <br>
- <br>
- The Eye-One Display LT came with a less expensive<span
- style="text-decoration: underline;"></span> package with more
- limited software from the manufacture.<br>
- The Eye-One Display 2 package came with more software
- features,&nbsp; but the instruments are virtually identical, and
- will operate identically using Argyll.<br>
- The ColorMunki Create<span style="text-decoration: underline;"></span>
- package is another alternative, and will operate identically using
- Argyll.<br>
- <br>
- <span style="font-weight: bold;">Operation:</span><br>
- <br>
+
+
+
+
+
+
+
+
+
+
+
+
+ MacBeth (Now X-Rite) is a discontinued instrument. It is often
+ available second hand. If buying it second hand, make sure it comes
+ with all it's accessories, including white reference, spot reading
+ adapter, display reading adapters, filters (UV, polarizing, D65),
+ serial cable adapter and power supply.<br>
+ <span style="font-weight: bold;"><br>
+ </span>
+ <hr style="width: 100%; height: 2px;"><span style="font-weight:
+ bold;"><br>
+ <a name="ss"></a>SpectroScan reflective/emissive and SpectroScanT
+ reflective/emissive/transmissive spectrometers<br>
+ <br>
+ <img style="width: 336px; height: 294px;" alt="" src="ss.jpg"><br>
+ <br>
+ </span><span style="font-weight: bold;">Availability:<br>
+ <br>
+ </span>The <span style="font-weight: bold;">SpectroScan</span> and
+ <span style="font-weight: bold;">SpectroScanT</span> from Gretag
+ MacBeth (Now X-Rite) is a discontinued instrument. It is the
+ combination of an X-Y table and the <span style="font-weight:
+ bold;">Spectrolino</span> instrument. The <span
+ style="font-weight: bold;">SpectroScanT</span> is capable of
+ measuring transparency. It is often available second hand. If buying
+ it second hand, make sure it comes with all it's accessories,
+ including white reference, spot reading adapter, display reading
+ adapters, filters (UV, polarizing, D65) and power supply.<br>
+ <br>
+ If measuring transparencies using a SpectroScanT, the <b>Enter</b>
+ key on the instrument may be used to trigger each reading. It will
+ be recognized after each previous reading has been completed.<br>
+ <br>
+ <hr style="width: 100%; height: 2px;"><br>
+ <br>
+ <span style="font-weight: bold;"><a name="i1p2"></a>Eye-One Pro2:</span><br>
+ <img style=" width: 357px; height: 234px;" alt="Eye-One Pro 2"
+ src="i1pro2.jpg"><br>
+ <br>
+ There is support for some of the new features of the Eye-One Pro2
+ (also known as the Eye-One Pro Rev E), in particular the&nbsp; Rev E
+ measurement mode, spectrometer stray light reduction, wavelength
+ calibration, and improved black level tracking. This new support can
+ be disabled and an Eye-One Pro2 operated in legacy mode by setting
+ the environment variable ARGYLL_DISABLE_I1PRO2_DRIVER. See <a
+ href="instruments.html#i1p">Eye-One Pro reflective/emissive
+ spectrometer</a><span style="font-weight: bold;"> </span>below
+ for details on the operation of this type of instrument.<br>
+ <br>
+ <hr style="width: 100%; height: 2px;"><br>
+ <span style="font-weight: bold;"><a name="i1p"></a>Eye-One Pro and
+ Eye-One Pro2 reflective/emissive spectrometer<br>
+ <br>
+ <img alt="" src="i1p.jpg" style="width: 347px; height: 234px;"><br>
+ <br>
+ </span><span style="font-weight: bold;">Availability:<br>
+ <br>
+ </span>The <span style="font-weight: bold;">Eye-One Pro</span> from
+ <a href="http://www.xrite.com/">X-Rite</a> (was Gretag MacBeth) is
+ available in two packages from the manufacturer. These packages
+ differ partly in what accessories come with the instrument, but
+ primarily in what features the manufacturers software provides. This
+ comparison <a
+ href="http://www.xrite.com/product_overview.aspx?ID=812">chart</a>
+ illustrates the differences. Used with Argyll, there are no
+ differences in operation of an Eye-One Pro instrument, irrespective
+ of which package it came with. The lowest cost package is the <a
+ href="http://www.xrite.com/product_overview.aspx?ID=1461">i1 Basic
+ Pro</a>.<br>
+ <br>
+ The EFI ES-1000 (which is a re-badged Eye-One Pro) is also reported
+ to work with Argyll.<br>
+ <br>
+ Unless you know what you're doing, and have a very specific reason
+ to buy an instrument fitted with a UV (Ultra Violet) filter, make
+ sure that you buy an instrument without the filter. A UV filtered
+ instrument can't deal intelligently with FWA (Fluorescent Whitener
+ Additive) effects in paper. (Look <a href="FWA.html">here</a> for
+ more information about FWA compensation.) Using FWA compensation you
+ can make measurements using ISO 13655:2009 M0, M1 and M2 conditions.
+ The M2 condition emulates a UV cut instrument.<br>
+ <br>
+ There have been four revisions of the Eye-One Pro, Rev. A, B, D and
+ E (AKA Eye-One Pro2). The rev B, D and E are capable of sampling
+ twice as fast as the Rev. A version of the instrument, and are also
+ available with an ambient light reading capability.<br>
+ <br>
+ <span style="font-weight: bold;">NOTE</span> for those running on
+ older versions of Linux with a Rev. D, there was a problem with the
+ Linux USB stack that causes the instrument to stop working once it
+ has been used. The only workaround is to unplug and replug the
+ instrument in again, whereupon it can be used one time again. A fix
+ for this problem was in the&nbsp; Linux 2.6.26 kernel release.<br>
+ <br>
+ See also <a href="i1proDriver.html">How can I have confidence in
+ the i1pro Driver ?</a><br>
+ <br>
+ <span style="font-weight: bold;">Patch recognition:</span><br>
+ <br>
+ For the best chances of good patch recognition, the instrument
+ should be drawn smoothly and not too rapidly over the strip. If
+ there is a misread, try slowing down slightly. The Rev A and B.
+ instruments have a slower sampling rate than the latter revision
+ instruments, and hence must be used a bit more slowly. Generally a
+ higher quality set of readings will result if slower scans are used,
+ since there will then be more samples averaged for each patch.<br>
+ <br>
+ In <a href="chartread.html">chartread</a>, the -<span
+ style="font-weight: bold;">T ratio</span> argument modifies the
+ patch consistency tolerance threshold for the Eye-One Pro. In
+ recognizing patches in a strip, the instrument takes multiple
+ readings as the strip is read, and then divide the readings up into
+ each patch. It then check the consistency of the multiple readings
+ corresponding to each patch, and reject the measurement if they are
+ too inconsistent. For some media (ie. a coarser screens, fabric
+ etc.) the default tolerance may be unreasonably tight, so the <span
+ style="font-weight: bold;">-T ratio</span> argument can be used to
+ modify this criteria. To loosen the tolerance, use a number greater
+ than 1.0 (ie. 1.5, 2.0). <span style="font-weight: bold;"></span><br>
+ <br>
+ <span style="font-weight: bold;">Special features:</span><br>
+ <br>
+ A feature unique to Argyll when used with the Eye-One Pro, is the
+ high resolution spectral mode. This returns spectral measurements at
+ 3.333 nm spacing, rather than the default 10nm spacing, and also
+ extends the range of wavelengths very slightly. This high resolution
+ may assist in giving better accuracy for "peaky" emissive sources
+ such as illuminants and displays. The high resolution mode is
+ selected by using the <span style="font-weight: bold;">-H</span>
+ flag on the command line to <span style="font-weight: bold;">dispcal</span>,
+ <span style="font-weight: bold;">dispread</span>, <span
+ style="font-weight: bold;">chartread</span>, and <span
+ style="font-weight: bold;">spotread</span>. It can also be toggled
+ on and off within <span style="font-weight: bold;">spotread</span>
+ using the <span style="font-weight: bold;">h</span> key.<br>
+ <br>
+ Note that while finer spectral resolution will worsen the signal to
+ noise ratio of the individual spectral values, the signal to noise
+ ratio of the resulting tri-stimulus color values will be identical
+ to normal resolution mode, since the same overall integration is
+ performed. <br>
+ <br>
+ See <a href="i1proHiRes.html">Does the i1pro High Resolution mode
+ improve accuracy ?</a><br>
+ <br>
+ <img alt="High res. and standard res. spectrum."
+ src="Fluorescent.jpg" style="width: 750px; height: 375px;"><br>
+ <br>
+ <img alt="C.R.T high res. and standard res. spectrum."
+ src="CRTspectrum.jpg" style="width: 750px; height: 375px;"><br>
+ <br>
+ <hr style="width: 100%; height: 2px;"><br>
+ <span style="font-weight: bold;"><a name="i1m"></a>Eye-One Monitor
+ emissive spectrometer<br>
+ <br>
+ <img alt="" src="i1m.jpg" style="width: 347px; height: 234px;"><br>
+ <br>
+ </span><span style="font-weight: bold;">Availability:<br>
+ <br>
+ </span>The <span style="font-weight: bold;">Eye-One Monitor</span>
+ from <a href="http://www.xrite.com/">X-Rite</a> (was Gretag
+ MacBeth) is a discontinued instrument. It was a lower cost version
+ of the <span style="font-weight: bold;">Eye-One Pro</span> without
+ reflective measurement capability. See <a href="#i1p">Eye-One Pro
+ reflective/emissive spectrometer</a><span style="font-weight:
+ bold;"> </span>for details on the operation of this instrument.<br>
+ <br>
+ <br>
+ <hr style="width: 100%; height: 2px;"><br>
+ <span style="font-weight: bold;"><a name="i1d"></a>Eye-One Display
+ 1, Eye-One Display 2, Eye-One Display LT, ColorMunki Create,
+ ColorMunki Smile colorimeters,<br>
+ <br>
+ <img style=" width: 124px; height: 168px;" alt="ColorMunki Smile"
+ src="Smile.jpg"><img alt="Eye-One Display 2" src="i1d.jpg"
+ style="width: 145px; height: 168px;"> <img style="width: 133px;
+ height: 168px;" alt="ColorMunki Create"
+ src="ColorMunkiCreate.jpg"><br>
+ <br>
+ Instrument Availability:<br>
+ <br>
+ </span>The <span style="font-weight: bold;">ColorMunki Smile</span>
+ colorimeter is a currently available instrument.<br>
+ The <span style="font-weight: bold;">Eye-One Display LT</span> and
+ <span style="font-weight: bold;">Eye-One Display 2</span> are
+ discontinued products, although they may still be available from
+ some retailers, second hand, and may still be shipped with some
+ displays as part of their calibration capability.<br>
+ The <span style="font-weight: bold;">ColorMunki Create</span>
+ colorimeter is a discontinued product, although they may still be
+ available from some retailers or second hand,can also be used. They
+ will appear as an i1Display2 colorimeter.<br>
+ The <span style="font-weight: bold;">HP DreamColor</span>
+ colorimeter can also be used, and will appear as an i1Display2
+ colorimeter [note that it is calibrated for the DreamColor display].<br>
+ The <span style="font-weight: bold;">HP APS</span> (Advanced
+ Profiling Solution) colorimeter is also reported to work, and will
+ appear as an i1Display2.<br>
+ The <span style="font-weight: bold;">CalMAN X2</span> colorimeter
+ is also reported to work, and will appear as an i1Display2
+ colorimeter.<br>
+ The&nbsp; <span style="font-weight: bold;">Lacie Blue Eye</span> <span
+ style="font-weight: bold;"></span> colorimeter is also reported to
+ work, and will appear as an i1Display2 colorimeter.<br>
+ <br>
+ <span style="font-weight: bold;"></span>The <span
+ style="font-weight: bold;">Eye-One Display 1</span> is a
+ discontinued instrument. <br>
+ <br>
+ The Eye-One Display LT came with a less expensive<span
+ style="text-decoration: underline;"></span> package with more
+ limited software from the manufacture.<br>
+ The Eye-One Display 2 package came with more software
+ features,&nbsp; but the instruments are virtually identical, and
+ will operate identically using Argyll.<br>
+ The ColorMunki Create<span style="text-decoration: underline;"></span>
+ package is another alternative, and will operate identically using
+ Argyll.<br>
+ <br>
+ <span style="font-weight: bold;">Operation:</span><br>
+ <br>
The Display Selections for the <span style="font-weight: bold;">ColorMunki
@@ -1484,23 +1732,47 @@ Gretag
- Smile</span> are:<br>
- <br>
- &nbsp;&nbsp;&nbsp; <span style="font-weight: bold;">f</span>
- &nbsp;&nbsp; LCD with CCFL back-light&nbsp;&nbsp;&nbsp;
- &nbsp;&nbsp;&nbsp;&nbsp; A Liquid Crystal display that uses a Cold
- Cathode Fluorescent back lighting. [Default, CB1]<br>
+
+
+
+
+
+
+
+
+
+
+
+
+ Smile</span> are:<br>
+ <br>
+ &nbsp;&nbsp;&nbsp; <span style="font-weight: bold;">f</span>
+ &nbsp;&nbsp; LCD with CCFL back-light&nbsp;&nbsp;&nbsp;
+ &nbsp;&nbsp;&nbsp;&nbsp; A Liquid Crystal display that uses a Cold
+ Cathode Fluorescent back lighting. [Default, CB1]<br>
&nbsp;&nbsp;&nbsp; <span style="font-weight: bold;">e</span>&nbsp;&nbsp;&nbsp;
- LCD with LED back-light&nbsp;&nbsp;&nbsp;
- &nbsp;&nbsp;&nbsp;&nbsp;&nbsp; A Liquid Crystal display that uses
- Light Emitting Diode back lighting.<br>
- <br>
- other instruments will offer:<br>
- <br>
+
+
+
+
+
+
+
+
+
+
+
+
+ LCD with LED back-light&nbsp;&nbsp;&nbsp;
+ &nbsp;&nbsp;&nbsp;&nbsp;&nbsp; A Liquid Crystal display that uses
+ Light Emitting Diode back lighting.<br>
+ <br>
+ other instruments will offer:<br>
+ <br>
&nbsp;&nbsp;&nbsp; <span style="font-weight: bold;">l</span>&nbsp;&nbsp;&nbsp;&nbsp;
@@ -1523,8 +1795,20 @@ Gretag
- LCD display&nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;&nbsp; A Liquid
- Crystal Display, that is of the Non-Refresh type. [Default, CB1]<br>
+
+
+
+
+
+
+
+
+
+
+
+
+ LCD display&nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;&nbsp; A Liquid
+ Crystal Display, that is of the Non-Refresh type. [Default, CB1]<br>
&nbsp;&nbsp;&nbsp; <span style="font-weight: bold;">c</span>&nbsp;&nbsp;&nbsp;
@@ -1547,121 +1831,141 @@ Gretag
- CRT display&nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;&nbsp;&nbsp; A
- Cathode Ray Tube display, that is of the Refresh type. [CB2]<br>
- <br>
- <br>
- <hr style="width: 100%; height: 2px;"><br>
- <span style="font-weight: bold;"><a name="i1d3"></a></span>&nbsp; <span
- style="font-weight: bold;">i1 DisplayPro and ColorMunki Display<span
- style="font-weight: bold;"> colorimeters (i1 Display 3)</span><br>
- <br>
- <img alt="i1 Display Pro" src="i1d3_1.jpg" style="width: 194px;
- height: 223px;"> <img style="width: 176px; height: 222px;"
- alt="ColorMunki Display" src="i1d3_2.jpg"><br>
- <br>
- Instrument Availability:<br>
- <br>
- </span>Both instruments are currently available..<br>
- <br>
- The ColorMunki Display is a less expensive <a
-href="http://xritephoto.com/ph_product_overview.aspx?id=1513&amp;catid=149">package</a>
- with more limited software from the manufacture, and takes a
- noticeably longer time to make most measurements (a minimum of 1
- second), but both instruments will take longer for very dark
- samples, and under these conditions the speed difference is less
- significant.<br>
- <br>
- The i1Display Pro <a
-href="http://xritephoto.com/ph_product_overview.aspx?id=1454&amp;catid=109">package</a>
- comes with i1Profiler, and the instrument is generally faster than
- the ColorMunki Display, but other than this and the software
- package, the instruments appear to be virtually identical. (Note
- though that the ColorMunki Display is <u>unable</u> to measure the
- refresh period, so is less repeatable in this mode than the
- i1Display Pro).<br>
- <br>
- Both instruments are capable of using CCSS (<a
- href="File_Formats.html#ccss">Colorimeter Calibration Spectral
- Sample</a>) files, and this also gives the instrument the
- capability of using a non-default standard observer. CCSS files can
- be created using the <a href="ccxxmake.html">ccxxmake</a> tool, and
- installed or translated from the .EDR files that are provided with
- the instrument CD using the <a href="oeminst.html">oeminst</a>
- utility using a spectrometer as a reference.<br>
- <br>
- There are some OEM versions of this instrument around too, and the <a
- href="http://www.spectracal.com/">SpectraCal OEM i1Display</a>, <a
- href="http://www.chromapure.com/">ChromaPure</a> and <a
- href="http://www.necdisplay.com/p/sensors/mdsvsensor3">NEC
- SpectraSensor Pro</a> instruments are also reported to work. They
- will appear as a be a the same as the i1Display Pro.<br>
- <span style="font-weight: bold;">[Note</span> that if you have an
- OEM version of this instrument, it's worth checking if they come
- with any extra .edr files, that can then be translated for use with
- ArgyllCMS using <a href="oeminst.html">oeminst</a>.]<br>
- <br>
- On MSWindows, if you have installed the Manufacturers applications,
- you may have to shut the i1Profiler tray application down before
- Argyll can open the instrument.<br>
- <br>
- <span style="font-weight: bold;">Operation:</span><br>
- <br>
- The Display Selections for this instrument are:<br>
- <br>
- &nbsp;&nbsp;&nbsp; <span style="font-weight: bold;">n</span><span
- style="font-weight: bold;"></span>&nbsp;&nbsp;&nbsp;&nbsp; A
- non-refresh type display [Default, CB1].<br>
- &nbsp;&nbsp;&nbsp; <span style="font-weight: bold;">r</span>
- &nbsp;&nbsp;&nbsp; A refresh type display&nbsp; - The refresh period
- is measured, and the integration time adjusted appropriately. [CB2]<br>
- <br>
- With the manufacturers .edr files &amp; reference Argyll .ccss files
- installed, the following selections are:<br>
- <br>
- &nbsp;&nbsp;&nbsp; <span style="font-weight: bold;">n</span><span
- style="font-weight: bold;"></span>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; A
- non-refresh type display [Default, CB1].<br>
- &nbsp;&nbsp;&nbsp; <span style="font-weight: bold;">r</span>
- &nbsp;&nbsp;&nbsp;&nbsp; A refresh type display&nbsp; - The refresh
- period is measured, and the integration time adjusted appropriately.
- [CB2]<br>
- &nbsp;&nbsp;&nbsp; <b>c</b>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; CRT
- (Hitachi CM2112MET, Diamond View 1772ie)<br>
- &nbsp;&nbsp;&nbsp; <b>l</b> &nbsp;&nbsp;&nbsp;&nbsp;&nbsp; LCD CCFL
- IPS (CCFL AC EIZO HP with CORRECTION)<br>
- &nbsp;&nbsp;&nbsp; <b>L</b>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; LCD CCFL
- Wide Gamut IPS (WG CCFL NEC241 271)<br>
- &nbsp;&nbsp;&nbsp; <b>b&nbsp;</b>&nbsp;&nbsp;&nbsp;&nbsp; LCD RGB
- LED IPS (RGBLED HP SOYO)<br>
- &nbsp;&nbsp;&nbsp; <b>e</b>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; LCD White
- LED IPS (WLED AC LG Samsung)<br>
- &nbsp;&nbsp;&nbsp; <b>p</b>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Projector
- (Marantz HP Panasonic Projectors Hybrid EDR)<br>
- <br>
- <b>Note when measuring CRT displays:<br>
- </b><br>
- The small magnet in the ambient light cover used to signal what
- position it is in, can interfere in the operation of the CRT
- display, particularly if the ambient cover is in it's natural
- position at 180 degrees away from the measuring lens. One way of
- minimizing this is to swing the cover down so that it touches the
- display adjacent to the lens, thereby moving the magnet away from
- the display surface. A more thorough but inconvenient way of
- avoiding this problem is to unclip the ambient light cover and slide
- it down the cable.<br>
- <br>
- <hr style="width: 100%; height: 2px;"><br>
- <span style="font-weight: bold;"><a name="Huey"></a>Huey colorimeter<br>
- <br>
- <img alt="" src="Huey.jpg" style="width: 128px; height: 202px;"><br>
- <br>
- Availability:<br>
- <br>
- </span>The <span style="font-weight: bold;">Huey </span>is widely
- available under the <a href="http://www.pantone.com/">Pantone</a>
- name as well as the manufacturer, <a href="http://www.xrite.com/">X-Rite</a>.
- There lower cost Huey is now discontinued, while the <a
+
+
+
+
+
+
+
+
+
+
+
+
+ CRT display&nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;&nbsp;&nbsp; A
+ Cathode Ray Tube display, that is of the Refresh type. [CB2]<br>
+ <br>
+ <br>
+ <hr style="width: 100%; height: 2px;"><br>
+ <span style="font-weight: bold;"><a name="i1d3"></a></span>&nbsp; <span
+ style="font-weight: bold;">i1 DisplayPro and ColorMunki Display<span
+ style="font-weight: bold;"> colorimeters (i1 Display 3)</span><br>
+ <br>
+ <img alt="i1 Display Pro" src="i1d3_1.jpg" style="width: 194px;
+ height: 223px;"> <img style="width: 176px; height: 222px;"
+ alt="ColorMunki Display" src="i1d3_2.jpg"><br>
+ <br>
+ Instrument Availability:<br>
+ <br>
+ </span>Both instruments are currently available..<br>
+ <br>
+ The ColorMunki Display is a less expensive <a
+href="http://xritephoto.com/ph_product_overview.aspx?id=1513&amp;catid=149">package</a>
+ with more limited software from the manufacture, and takes a
+ noticeably longer time to make most measurements (a minimum of 1
+ second), but both instruments will take longer for very dark
+ samples, and under these conditions the speed difference is less
+ significant.<br>
+ <br>
+ The i1Display Pro <a
+href="http://xritephoto.com/ph_product_overview.aspx?id=1454&amp;catid=109">package</a>
+ comes with i1Profiler, and the instrument is generally faster than
+ the ColorMunki Display, but other than this and the software
+ package, the instruments appear to be virtually identical. (Note
+ though that the ColorMunki Display is <u>unable</u> to measure the
+ refresh period, so is less repeatable in this mode than the
+ i1Display Pro).<br>
+ <br>
+ Both instruments are capable of using CCSS (<a
+ href="File_Formats.html#ccss">Colorimeter Calibration Spectral
+ Sample</a>) files, and this also gives the instrument the
+ capability of using a non-default standard observer. CCSS files can
+ be created using the <a href="ccxxmake.html">ccxxmake</a> tool, and
+ installed or translated from the .EDR files that are provided with
+ the instrument CD using the <a href="oeminst.html">oeminst</a>
+ utility using a spectrometer as a reference.<br>
+ <br>
+ There are some OEM versions of this instrument around too, and the <a
+ href="http://www.spectracal.com/">SpectraCal OEM i1Display</a>, <a
+ href="http://www.chromapure.com/">ChromaPure</a>, <a
+ href="http://www.necdisplay.com/p/sensors/mdsvsensor3">NEC
+ SpectraSensor Pro</a> and <a
+href="http://www8.hp.com/us/en/products/oas/product-detail.html?oid=5225568">HP
+
+
+
+
+
+
+ DreamColor</a> instruments are also reported to work. They will
+ appear as a be a the same as the i1Display Pro.<br>
+ <span style="font-weight: bold;">[Note</span> that if you have an
+ OEM version of this instrument, it's worth checking if they come
+ with any extra .edr files, that can then be translated for use with
+ ArgyllCMS using <a href="oeminst.html">oeminst</a>.]<br>
+ <br>
+ On MSWindows, if you have installed the Manufacturers applications,
+ you may have to shut the i1Profiler tray application down before
+ Argyll can open the instrument.<br>
+ <br>
+ <span style="font-weight: bold;">Operation:</span><br>
+ <br>
+ The Display Selections for this instrument are:<br>
+ <br>
+ &nbsp;&nbsp;&nbsp; <span style="font-weight: bold;">n</span><span
+ style="font-weight: bold;"></span>&nbsp;&nbsp;&nbsp;&nbsp; A
+ non-refresh type display [Default, CB1].<br>
+ &nbsp;&nbsp;&nbsp; <span style="font-weight: bold;">r</span>
+ &nbsp;&nbsp;&nbsp; A refresh type display&nbsp; - The refresh period
+ is measured, and the integration time adjusted appropriately. [CB2]<br>
+ <br>
+ With the manufacturers .edr files &amp; reference Argyll .ccss files
+ installed, the following selections are:<br>
+ <br>
+ &nbsp;&nbsp;&nbsp; <span style="font-weight: bold;">n</span><span
+ style="font-weight: bold;"></span>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; A
+ non-refresh type display [Default, CB1].<br>
+ &nbsp;&nbsp;&nbsp; <span style="font-weight: bold;">r</span>
+ &nbsp;&nbsp;&nbsp;&nbsp; A refresh type display&nbsp; - The refresh
+ period is measured, and the integration time adjusted appropriately.
+ [CB2]<br>
+ &nbsp;&nbsp;&nbsp; <b>c</b>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; CRT
+ (Hitachi CM2112MET, Diamond View 1772ie)<br>
+ &nbsp;&nbsp;&nbsp; <b>l</b> &nbsp;&nbsp;&nbsp;&nbsp;&nbsp; LCD CCFL
+ IPS (CCFL AC EIZO HP with CORRECTION)<br>
+ &nbsp;&nbsp;&nbsp; <b>L</b>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; LCD CCFL
+ Wide Gamut IPS (WG CCFL NEC241 271)<br>
+ &nbsp;&nbsp;&nbsp; <b>b&nbsp;</b>&nbsp;&nbsp;&nbsp;&nbsp; LCD RGB
+ LED IPS (RGBLED HP SOYO)<br>
+ &nbsp;&nbsp;&nbsp; <b>e</b>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; LCD White
+ LED IPS (WLED AC LG Samsung)<br>
+ &nbsp;&nbsp;&nbsp; <b>p</b>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Projector
+ (Marantz HP Panasonic Projectors Hybrid EDR)<br>
+ <br>
+ <b>Note when measuring CRT displays:<br>
+ </b><br>
+ The small magnet in the ambient light cover used to signal what
+ position it is in, can interfere in the operation of the CRT
+ display, particularly if the ambient cover is in it's natural
+ position at 180 degrees away from the measuring lens. One way of
+ minimizing this is to swing the cover down so that it touches the
+ display adjacent to the lens, thereby moving the magnet away from
+ the display surface. A more thorough but inconvenient way of
+ avoiding this problem is to unclip the ambient light cover and slide
+ it down the cable.<br>
+ <br>
+ <hr style="width: 100%; height: 2px;"><br>
+ <span style="font-weight: bold;"><a name="Huey"></a>Huey colorimeter<br>
+ <br>
+ <img alt="" src="Huey.jpg" style="width: 128px; height: 202px;"><br>
+ <br>
+ Availability:<br>
+ <br>
+ </span>The <span style="font-weight: bold;">Huey </span>is widely
+ available under the <a href="http://www.pantone.com/">Pantone</a>
+ name as well as the manufacturer, <a href="http://www.xrite.com/">X-Rite</a>.
+ There lower cost Huey is now discontinued, while the <a
href="http://www.pantone.com/pages/products/product.aspx?pid=562&amp;ca=2">Huey
@@ -1684,12 +1988,24 @@ href="http://www.pantone.com/pages/products/product.aspx?pid=562&amp;ca=2">Huey
- Pro</a> is still available.<br>
- <span style="font-weight: bold;"></span><br>
- <span style="font-weight: bold;">Operation:</span><br>
- <br>
- The Display Selections for this instrument are:<br>
- <br>
+
+
+
+
+
+
+
+
+
+
+
+
+ Pro</a> is still available.<br>
+ <span style="font-weight: bold;"></span><br>
+ <span style="font-weight: bold;">Operation:</span><br>
+ <br>
+ The Display Selections for this instrument are:<br>
+ <br>
&nbsp;&nbsp;&nbsp; <span style="font-weight: bold;">l</span>&nbsp;&nbsp;&nbsp;&nbsp;
@@ -1712,8 +2028,20 @@ href="http://www.pantone.com/pages/products/product.aspx?pid=562&amp;ca=2">Huey
- LCD display&nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;&nbsp; A Liquid
- Crystal Display, that is of the Non-Refresh type. [Default, CB1]<br>
+
+
+
+
+
+
+
+
+
+
+
+
+ LCD display&nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;&nbsp; A Liquid
+ Crystal Display, that is of the Non-Refresh type. [Default, CB1]<br>
&nbsp;&nbsp;&nbsp; <span style="font-weight: bold;">c</span>&nbsp;&nbsp;&nbsp;
@@ -1736,33 +2064,45 @@ href="http://www.pantone.com/pages/products/product.aspx?pid=562&amp;ca=2">Huey
- CRT display&nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;&nbsp; A Cathode Ray
- Tube display, that is of the Refresh type. [CB2]<br>
- <br>
- <br>
- <hr style="width: 100%; height: 2px;"><br>
- <span style="font-weight: bold;"><a name="mox"></a>MonacoOPTIX
- colorimeters<br>
- <br>
- <img alt="" src="mox.jpg" style="width: 115px; height: 147px;">
- &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; <img alt="" src="Chroma4.jpg"
- style="width: 135px; height: 146px;"><br>
- <br>
- Instrument Availability:<br>
- </span><br>
- <span style="font-weight: bold;">Availability:<br>
- <br>
- </span>The <span style="font-weight: bold;">MonacoOPTIX</span> from
- Monaco Soft is a discontinued instrument.&nbsp; It may still be
- available as old stock, or second hand. It was sold packaged with
- software from the manufacturer. The Sequel Chroma 4 appears to be a
- similar instrument, and both seem to operate as if they were an
- Eye-One Display 1 using Argyll.<br>
- <br>
- <span style="font-weight: bold;">Operation:</span><br>
- <br>
- The Display Selections for this instrument are:<br>
- <br>
+
+
+
+
+
+
+
+
+
+
+
+
+ CRT display&nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;&nbsp; A Cathode Ray
+ Tube display, that is of the Refresh type. [CB2]<br>
+ <br>
+ <br>
+ <hr style="width: 100%; height: 2px;"><br>
+ <span style="font-weight: bold;"><a name="mox"></a>MonacoOPTIX
+ colorimeters<br>
+ <br>
+ <img alt="" src="mox.jpg" style="width: 115px; height: 147px;">
+ &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; <img alt="" src="Chroma4.jpg"
+ style="width: 135px; height: 146px;"><br>
+ <br>
+ Instrument Availability:<br>
+ </span><br>
+ <span style="font-weight: bold;">Availability:<br>
+ <br>
+ </span>The <span style="font-weight: bold;">MonacoOPTIX</span> from
+ Monaco Soft is a discontinued instrument.&nbsp; It may still be
+ available as old stock, or second hand. It was sold packaged with
+ software from the manufacturer. The Sequel Chroma 4 appears to be a
+ similar instrument, and both seem to operate as if they were an
+ Eye-One Display 1 using Argyll.<br>
+ <br>
+ <span style="font-weight: bold;">Operation:</span><br>
+ <br>
+ The Display Selections for this instrument are:<br>
+ <br>
&nbsp;&nbsp;&nbsp; <span style="font-weight: bold;">c</span>&nbsp;&nbsp;&nbsp;
@@ -1785,8 +2125,20 @@ href="http://www.pantone.com/pages/products/product.aspx?pid=562&amp;ca=2">Huey
- CRT display&nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;&nbsp; A Cathode Ray
- Tube display, that is of the Refresh type.<br>
+
+
+
+
+
+
+
+
+
+
+
+
+ CRT display&nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;&nbsp; A Cathode Ray
+ Tube display, that is of the Refresh type.<br>
&nbsp;&nbsp;&nbsp; <span style="font-weight: bold;">l</span>&nbsp;&nbsp;&nbsp;&nbsp;
@@ -1809,41 +2161,53 @@ href="http://www.pantone.com/pages/products/product.aspx?pid=562&amp;ca=2">Huey
- LCD display&nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;&nbsp; A Liquid
- Crystal Display, that is of the Non-Refresh type.<br>
- <br>
- <hr style="width: 100%; height: 2px;"><br>
- <span style="font-weight: bold;"><a name="spyd2"></a>Spyder 2
- colorimeter<br>
- <br>
- <img alt="" src="Spyd2.jpg" style="width: 218px; height: 232px;"><br>
- <br>
- </span><span style="font-weight: bold;">Availability:<br>
- <br>
- </span>The <span style="font-weight: bold;">Spyder 2 </span><span
- style="font-weight: bold;"></span>has been superseded by the
- Spyder 3 &amp; 4, but may be available second hand.<br>
- [The Spyder 1 has also been reported as working, but this has not
- been confirmed.]<br>
- <span style="font-weight: bold;"><br>
- </span><span style="font-weight: bold;">Operation:<br>
- </span><br>
- <span style="font-weight: bold;">Important Note </span>about the
- ColorVision Spyder 2 instrument support:<br>
- <br>
- This instrument cannot function without the driver software having
- access to the vendor supplied PLD firmware pattern for it.<br>
- This firmware is not provided with Argyll, since it is not available
- under a compatible license.<br>
- <br>
- The purchaser of a Spyder 2 instrument should have received a copy
- of this firmware along with their instrument, and should therefore
- be able to enable the Argyll driver for this instrument by using the
- <a href="oeminst.html">oeminst</a> tool.<span style="font-weight:
- bold;"></span><br>
- <br>
- The Display Selections for this instrument are:<br>
- <br>
+
+
+
+
+
+
+
+
+
+
+
+
+ LCD display&nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;&nbsp; A Liquid
+ Crystal Display, that is of the Non-Refresh type.<br>
+ <br>
+ <hr style="width: 100%; height: 2px;"><br>
+ <span style="font-weight: bold;"><a name="spyd2"></a>Spyder 2
+ colorimeter<br>
+ <br>
+ <img alt="" src="Spyd2.jpg" style="width: 218px; height: 232px;"><br>
+ <br>
+ </span><span style="font-weight: bold;">Availability:<br>
+ <br>
+ </span>The <span style="font-weight: bold;">Spyder 2 </span><span
+ style="font-weight: bold;"></span>has been superseded by the
+ Spyder 3 &amp; 4, but may be available second hand.<br>
+ [The Spyder 1 has also been reported as working, but this has not
+ been confirmed.]<br>
+ <span style="font-weight: bold;"><br>
+ </span><span style="font-weight: bold;">Operation:<br>
+ </span><br>
+ <span style="font-weight: bold;">Important Note </span>about the
+ ColorVision Spyder 2 instrument support:<br>
+ <br>
+ This instrument cannot function without the driver software having
+ access to the vendor supplied PLD firmware pattern for it.<br>
+ This firmware is not provided with Argyll, since it is not available
+ under a compatible license.<br>
+ <br>
+ The purchaser of a Spyder 2 instrument should have received a copy
+ of this firmware along with their instrument, and should therefore
+ be able to enable the Argyll driver for this instrument by using the
+ <a href="oeminst.html">oeminst</a> tool.<span style="font-weight:
+ bold;"></span><br>
+ <br>
+ The Display Selections for this instrument are:<br>
+ <br>
&nbsp;&nbsp;&nbsp; <span style="font-weight: bold;">l</span>&nbsp;&nbsp;&nbsp;&nbsp;
@@ -1866,8 +2230,20 @@ href="http://www.pantone.com/pages/products/product.aspx?pid=562&amp;ca=2">Huey
- LCD display&nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp; A Liquid Crystal
- Display, that is of the Non-Refresh type. [Default, CB1]<br>
+
+
+
+
+
+
+
+
+
+
+
+
+ LCD display&nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp; A Liquid Crystal
+ Display, that is of the Non-Refresh type. [Default, CB1]<br>
&nbsp;&nbsp;&nbsp; <span style="font-weight: bold;">c</span>&nbsp;&nbsp;&nbsp;
@@ -1890,131 +2266,143 @@ href="http://www.pantone.com/pages/products/product.aspx?pid=562&amp;ca=2">Huey
- CRT display&nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;&nbsp; A Cathode Ray
- Tube display, that is of the Refresh type. [CB2]<br>
- <br>
- <br>
- <span style="font-weight: bold;">Linux USB hub problems:<br>
- <br>
- </span>Note that the Spyder doesn't appear to operate at all well on
- Linux if attached to a secondary USB hub. You may have such a
- secondary hub built into your motherboard. If Argyll has difficulty
- in reliably talking to the Spyder, try connecting it directly to the
- computer rather than via a usb hub, or try using a USB port on your
- computer that connects directly to a root hub. This is probably due
- to a bug in the Linux EHCI driver, and a fix is due to appear in the
- Linux kernel sometime after July 2011. The name of the fix is "EHCI:
- fix direction handling for interrupt data toggles".<br>
- <br>
- <hr style="width: 100%; height: 2px;"><br>
- <span style="font-weight: bold;"><a name="spyd3"></a>Spyder 3
- colorimeter<br>
- <br>
- <img style="width: 262px; height: 220px;" alt="Spyder3"
- src="Spyd3.jpg"> <img style="width: 193px; height: 220px;"
- alt="Spyder3Express" src="Spyd3x.jpg"><br>
- <br>
- </span><span style="font-weight: bold;">Availability:<br>
- <br>
- </span>The <span style="font-weight: bold;">Spyder3Elite</span>, <span
- style="font-weight: bold;">Spyder3Pro</span> and <span
- style="font-weight: bold;">Spyder3Express</span> are being
- superseded by the Spyder4, but may still stocked by some dealers,
- and may be available second hand. The <span style="font-weight:
- bold;">Spyder3Elite</span> and <span style="font-weight: bold;">Spyder3Pro</span>
- appear to be identical hardware with different software from the
- manufacturer. The <span style="font-weight: bold;">Spyder3Express</span>
- lacks the ambient sensor.<br>
- <br>
- [Note that this instrument doesn't seem particularly suited to
- measuring CRT displays, since it no longer seems to synchronise its
- readings to a CRT refresh, and you can no longer remove the LCD
- filter, reducing its sensitivity compared to the Spyder 2 in CRT
- mode. The Spyder 2 or one of the other instruments may be a better
- choice if you particularly need to measure CRTs or Refresh
- displays.]<br>
- <span style="font-weight: bold;"><br>
- </span><span style="font-weight: bold;">Operation:<br>
- </span><br>
- The ambient light sensor can be used with the <span
- style="font-weight: bold;">Spyder3Elite</span> and <span
- style="font-weight: bold;">Spyder3Pro</span> instruments, but is
- only capable of monochrome readings.<span style="font-weight: bold;"><br>
- </span><br>
- The Display Selections for this instrument are:<br>
- <br>
- &nbsp;&nbsp;&nbsp; <span style="font-weight: bold;">n</span> | <span
- style="font-weight: bold;">l</span>&nbsp;&nbsp;&nbsp;&nbsp; A
- non-refresh type display [Default, CB1]<br>
- &nbsp;&nbsp;&nbsp; <span style="font-weight: bold;">r | c</span>
- &nbsp;&nbsp;&nbsp; A refresh type display. [CB2]<br>
- <br>
- <br>
- <hr style="width: 100%; height: 2px;"><br>
- <span style="font-weight: bold;"><a name="spyd4"></a>Spyder 4
- colorimeter<br>
- <br>
- <img style=" width: 262px; height: 220px;" alt="Spyder4"
- src="Spyd4.jpg"> <br>
- <br>
- </span><span style="font-weight: bold;">Availability:<br>
- <br>
- </span>The <span style="font-weight: bold;">Spyder4Elite</span>, <span
- style="font-weight: bold;">Spyder4Pro</span> and <span
- style="font-weight: bold;">Spyder4Express</span> are a currently
- available instruments. The <span style="font-weight: bold;">Spyder4Elite</span>
- and <span style="font-weight: bold;">Spyder4Pro</span> appear to be
- identical hardware with different software from the manufacturer.
- The <span style="font-weight: bold;">Spyder4Express</span> lacks
- the ambient sensor.<br>
- <span style="font-weight: bold;"><br>
- </span><span style="font-weight: bold;">Operation:<br>
- </span><br>
- These instruments are capable of using using CCSS (<a
- href="File_Formats.html#ccss">Colorimeter Calibration Spectral
- Sample</a>) files, and this also gives the instrument the
- capability of using a non-default standard observer. CCSS files can
- be created using the <a href="ccxxmake.html">ccxxmake</a> tool
- using a spectrometer as a reference.<br>
- <br>
- <span style="font-weight: bold;">Important Note </span>about the
- DataColor Spyder 4 vendor display type/calibration support:<br>
- <br>
- This instrument does not have a full range of display type
- calibration selections available without the vendor supplied
- calibration data for it.<br>
- This calibration data is not provided with Argyll, since it is not
- available under a compatible license.<br>
- You can use CCSS files as an alternative (see above), or as the
- purchaser of a Spyder 4 instrument you should have received a copy
- of the calibration data along with their instrument, and should
- therefore be able to enable the full range of display type
- selections in Argyll by using the <a href="oeminst.html">oeminst</a>
- tool.<br>
- <br>
- The Display Selections for this instrument are:<br>
- <br>
- &nbsp;&nbsp;&nbsp; <span style="font-weight: bold;">n</span> | <span
- style="font-weight: bold;">l</span>&nbsp;&nbsp; &nbsp;
- &nbsp;&nbsp; A non-refresh type display with a generic calibration
- [Default, CB1].<br>
- &nbsp;&nbsp;&nbsp; <span style="font-weight: bold;">r | c</span> <span
- style="font-weight: bold;"></span> &nbsp; &nbsp; &nbsp;&nbsp; A
- refresh type display with a generic calibration.[CB2]<br>
- <br>
- The Display Selections for this instrument when the manufacturers
- calibration information has been installed is:<br>
- <br>
- &nbsp;&nbsp;&nbsp; <span style="font-weight: bold;">n&nbsp;&nbsp; </span><span
- style="font-weight: bold;"></span>&nbsp;&nbsp; &nbsp;
- &nbsp;&nbsp;&nbsp;&nbsp; A non-refresh type display with a generic
- calibration [Default, CB1].<br>
- &nbsp;&nbsp;&nbsp; <span style="font-weight: bold;">r</span> <span
- style="font-weight: bold;"></span> &nbsp; &nbsp; &nbsp;&nbsp;
- &nbsp;&nbsp;&nbsp;&nbsp; A refresh type display with a generic
- calibration.[CB2]<br>
- &nbsp;&nbsp;&nbsp; <span style="font-weight: bold;">f &nbsp;&nbsp;
- &nbsp;&nbsp;&nbsp; </span>&nbsp;&nbsp;&nbsp;&nbsp; LCD, CCFL
+
+
+
+
+
+
+
+
+
+
+
+
+ CRT display&nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;&nbsp; A Cathode Ray
+ Tube display, that is of the Refresh type. [CB2]<br>
+ <br>
+ <br>
+ <span style="font-weight: bold;">Linux USB hub problems:<br>
+ <br>
+ </span>Note that the Spyder doesn't appear to operate at all well on
+ Linux if attached to a secondary USB hub. You may have such a
+ secondary hub built into your motherboard. If Argyll has difficulty
+ in reliably talking to the Spyder, try connecting it directly to the
+ computer rather than via a usb hub, or try using a USB port on your
+ computer that connects directly to a root hub. This is probably due
+ to a bug in the Linux EHCI driver, and a fix is due to appear in the
+ Linux kernel sometime after July 2011. The name of the fix is "EHCI:
+ fix direction handling for interrupt data toggles".<br>
+ <br>
+ <hr style="width: 100%; height: 2px;"><br>
+ <span style="font-weight: bold;"><a name="spyd3"></a>Spyder 3
+ colorimeter<br>
+ <br>
+ <img style="width: 262px; height: 220px;" alt="Spyder3"
+ src="Spyd3.jpg"> <img style="width: 193px; height: 220px;"
+ alt="Spyder3Express" src="Spyd3x.jpg"><br>
+ <br>
+ </span><span style="font-weight: bold;">Availability:<br>
+ <br>
+ </span>The <span style="font-weight: bold;">Spyder3Elite</span>, <span
+ style="font-weight: bold;">Spyder3Pro</span> and <span
+ style="font-weight: bold;">Spyder3Express</span> are being
+ superseded by the Spyder4, but may still stocked by some dealers,
+ and may be available second hand. The <span style="font-weight:
+ bold;">Spyder3Elite</span> and <span style="font-weight: bold;">Spyder3Pro</span>
+ appear to be identical hardware with different software from the
+ manufacturer. The <span style="font-weight: bold;">Spyder3Express</span>
+ lacks the ambient sensor.<br>
+ <br>
+ [Note that this instrument doesn't seem particularly suited to
+ measuring CRT displays, since it no longer seems to synchronise its
+ readings to a CRT refresh, and you can no longer remove the LCD
+ filter, reducing its sensitivity compared to the Spyder 2 in CRT
+ mode. The Spyder 2 or one of the other instruments may be a better
+ choice if you particularly need to measure CRTs or Refresh
+ displays.]<br>
+ <span style="font-weight: bold;"><br>
+ </span><span style="font-weight: bold;">Operation:<br>
+ </span><br>
+ The ambient light sensor can be used with the <span
+ style="font-weight: bold;">Spyder3Elite</span> and <span
+ style="font-weight: bold;">Spyder3Pro</span> instruments, but is
+ only capable of monochrome readings.<span style="font-weight: bold;"><br>
+ </span><br>
+ The Display Selections for this instrument are:<br>
+ <br>
+ &nbsp;&nbsp;&nbsp; <span style="font-weight: bold;">n</span> | <span
+ style="font-weight: bold;">l</span>&nbsp;&nbsp;&nbsp;&nbsp; A
+ non-refresh type display [Default, CB1]<br>
+ &nbsp;&nbsp;&nbsp; <span style="font-weight: bold;">r | c</span>
+ &nbsp;&nbsp;&nbsp; A refresh type display. [CB2]<br>
+ <br>
+ <br>
+ <hr style="width: 100%; height: 2px;"><br>
+ <span style="font-weight: bold;"><a name="spyd4"></a>Spyder 4
+ colorimeter<br>
+ <br>
+ <img style=" width: 262px; height: 220px;" alt="Spyder4"
+ src="Spyd4.jpg"> <br>
+ <br>
+ </span><span style="font-weight: bold;">Availability:<br>
+ <br>
+ </span>The <span style="font-weight: bold;">Spyder4Elite</span>, <span
+ style="font-weight: bold;">Spyder4Pro</span> and <span
+ style="font-weight: bold;">Spyder4Express</span> are a currently
+ available instruments. The <span style="font-weight: bold;">Spyder4Elite</span>
+ and <span style="font-weight: bold;">Spyder4Pro</span> appear to be
+ identical hardware with different software from the manufacturer.
+ The <span style="font-weight: bold;">Spyder4Express</span> lacks
+ the ambient sensor.<br>
+ <span style="font-weight: bold;"><br>
+ </span><span style="font-weight: bold;">Operation:<br>
+ </span><br>
+ These instruments are capable of using using CCSS (<a
+ href="File_Formats.html#ccss">Colorimeter Calibration Spectral
+ Sample</a>) files, and this also gives the instrument the
+ capability of using a non-default standard observer. CCSS files can
+ be created using the <a href="ccxxmake.html">ccxxmake</a> tool
+ using a spectrometer as a reference.<br>
+ <br>
+ <span style="font-weight: bold;">Important Note </span>about the
+ DataColor Spyder 4 vendor display type/calibration support:<br>
+ <br>
+ This instrument does not have a full range of display type
+ calibration selections available without the vendor supplied
+ calibration data for it.<br>
+ This calibration data is not provided with Argyll, since it is not
+ available under a compatible license.<br>
+ You can use CCSS files as an alternative (see above), or as the
+ purchaser of a Spyder 4 instrument you should have received a copy
+ of the calibration data along with the instrument, and should
+ therefore be able to enable the full range of display type
+ selections in Argyll by using the <a href="oeminst.html">oeminst</a>
+ tool.<br>
+ <br>
+ The Display Selections for this instrument are:<br>
+ <br>
+ &nbsp;&nbsp;&nbsp; <span style="font-weight: bold;">n</span> | <span
+ style="font-weight: bold;">l</span>&nbsp;&nbsp; &nbsp;
+ &nbsp;&nbsp; A non-refresh type display with a generic calibration
+ [Default, CB1].<br>
+ &nbsp;&nbsp;&nbsp; <span style="font-weight: bold;">r | c</span> <span
+ style="font-weight: bold;"></span> &nbsp; &nbsp; &nbsp;&nbsp; A
+ refresh type display with a generic calibration.[CB2]<br>
+ <br>
+ The Display Selections for this instrument when the manufacturers
+ calibration information has been installed is:<br>
+ <br>
+ &nbsp;&nbsp;&nbsp; <span style="font-weight: bold;">n&nbsp;&nbsp; </span><span
+ style="font-weight: bold;"></span>&nbsp;&nbsp; &nbsp;
+ &nbsp;&nbsp;&nbsp;&nbsp; A non-refresh type display with a generic
+ calibration [Default, CB1].<br>
+ &nbsp;&nbsp;&nbsp; <span style="font-weight: bold;">r</span> <span
+ style="font-weight: bold;"></span> &nbsp; &nbsp; &nbsp;&nbsp;
+ &nbsp;&nbsp;&nbsp;&nbsp; A refresh type display with a generic
+ calibration.[CB2]<br>
+ &nbsp;&nbsp;&nbsp; <span style="font-weight: bold;">f &nbsp;&nbsp;
+ &nbsp;&nbsp;&nbsp; </span>&nbsp;&nbsp;&nbsp;&nbsp; LCD, CCFL
Backlight&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
@@ -2037,17 +2425,29 @@ href="http://www.pantone.com/pages/products/product.aspx?pid=562&amp;ca=2">Huey
- - normal gamut Liquid Crystal Display with standard Cold Cathode
- Fluorescent Lamp backlight.<br>
- &nbsp;&nbsp;&nbsp; <span style="font-weight: bold;">L</span>&nbsp;
- &nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp; &nbsp; Wide Gamut LCD, CCFL
- Backlight&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; - wide gamut Liquid Crystal
- Display with Cold Cathode Fluorescent Lamps backlight.<br>
- &nbsp;&nbsp;&nbsp; <span style="font-weight: bold;">e</span>
- &nbsp;&nbsp; &nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;&nbsp; LCD, White
- LED Backlight&nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;
- &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; - normal
- gamut Liquid Crystal Display with a White LED backlight.<br>
+
+
+
+
+
+
+
+
+
+
+
+
+ - normal gamut Liquid Crystal Display with standard Cold Cathode
+ Fluorescent Lamp backlight.<br>
+ &nbsp;&nbsp;&nbsp; <span style="font-weight: bold;">L</span>&nbsp;
+ &nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp; &nbsp; Wide Gamut LCD, CCFL
+ Backlight&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; - wide gamut Liquid Crystal
+ Display with Cold Cathode Fluorescent Lamps backlight.<br>
+ &nbsp;&nbsp;&nbsp; <span style="font-weight: bold;">e</span>
+ &nbsp;&nbsp; &nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;&nbsp; LCD, White
+ LED Backlight&nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;
+ &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; - normal
+ gamut Liquid Crystal Display with a White LED backlight.<br>
&nbsp;&nbsp;&nbsp; <span style="font-weight: bold;">B</span>&nbsp;&nbsp;
@@ -2070,12 +2470,24 @@ href="http://www.pantone.com/pages/products/product.aspx?pid=562&amp;ca=2">Huey
- &nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;&nbsp; Wide Gamut LCD, RGB LED
- Backlight - wide gamut Liquid Crystal Display with RGB LED
- backlight.<br>
- &nbsp;&nbsp;&nbsp; <span style="font-weight: bold;">x</span>
- &nbsp;&nbsp; &nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;&nbsp; LCD, CCFL
- Type 2
+
+
+
+
+
+
+
+
+
+
+
+
+ &nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;&nbsp; Wide Gamut LCD, RGB LED
+ Backlight - wide gamut Liquid Crystal Display with RGB LED
+ backlight.<br>
+ &nbsp;&nbsp;&nbsp; <span style="font-weight: bold;">x</span>
+ &nbsp;&nbsp; &nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;&nbsp; LCD, CCFL
+ Type 2
Backlight&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
@@ -2098,23 +2510,6 @@ href="http://www.pantone.com/pages/products/product.aspx?pid=562&amp;ca=2">Huey
- - normal gamut Liquid Crystal Display with alternative Cold Cathode
- Fluorescent Lamp backlight (Laptop ?)<br>
- <br>
- The ambient light sensor can be used with the <span
- style="font-weight: bold;">Spyder4Elite</span> and <span
- style="font-weight: bold;">Spyder4Pro</span> instruments, but is
- only capable of monochrome readings.<span style="font-weight: bold;"></span><br>
- <span style="font-weight: bold;"></span><br>
- <hr style="width: 100%; height: 2px;"><a name="HCFR"></a><span
- style="font-weight: bold;" class="titre">Colorim&egrave;tre HCFR
- colorimeter<br>
- <br>
- <img alt="" src="HCFR.jpg" style="width: 203px; height: 194px;"><br>
- <br>
- </span><span style="font-weight: bold;">Availability:<br>
- <br>
- </span>The <span style="font-weight: bold;" class="titre">Colorim&egrave;tre
@@ -2126,6 +2521,34 @@ href="http://www.pantone.com/pages/products/product.aspx?pid=562&amp;ca=2">Huey
+
+ - normal gamut Liquid Crystal Display with alternative Cold Cathode
+ Fluorescent Lamp backlight (Laptop ?)<br>
+ <br>
+ The ambient light sensor can be used with the <span
+ style="font-weight: bold;">Spyder4Elite</span> and <span
+ style="font-weight: bold;">Spyder4Pro</span> instruments, but is
+ only capable of monochrome readings.<span style="font-weight: bold;"></span><br>
+ <span style="font-weight: bold;"></span><br>
+ <hr style="width: 100%; height: 2px;"><a name="HCFR"></a><span
+ style="font-weight: bold;" class="titre">Colorimètre HCFR
+ colorimeter<br>
+ <br>
+ <img alt="" src="HCFR.jpg" style="width: 203px; height: 194px;"><br>
+ <br>
+ </span><span style="font-weight: bold;">Availability:<br>
+ <br>
+ </span>The <span style="font-weight: bold;" class="titre">Colorimètre
+
+
+
+
+
+
+
+
+
+
@@ -2136,26 +2559,39 @@ href="http://www.pantone.com/pages/products/product.aspx?pid=562&amp;ca=2">Huey
- HCFR Probe</span> is a kit instrument from <span
- style="font-weight: bold;"></span> <a
- href="http://www.homecinema-fr.com/colorimetre/index_en.php">HCFR</a>.
- <br>
- <br>
- <span style="font-weight: bold;">OS X</span><br>
- <br>
- Please note the installation <a href="Installing_OSX.html#HCFR">instructions</a>.<br>
- <br>
- <span style="font-weight: bold;">Operation:</span><br>
- <span style="font-weight: bold;"><span style="font-weight: bold;"></span></span><br>
- The accuracy of this instrument does not seem to be comparable to
- the commercial instruments when used for measuring displays,
- particularly in the area of measuring dark colors, and I've seen the
- best results when used with a CRT display. It may well give good
- results in calibrating projectors, since this was what it was
- designed to do.<br>
- <br>
- The Display Selections for this instrument are:<br>
- <br>
+
+
+
+
+
+
+
+
+
+
+
+
+
+ HCFR Probe</span> is a kit instrument from <span
+ style="font-weight: bold;"></span> <a
+ href="http://www.homecinema-fr.com/colorimetre/index_en.php">HCFR</a>.
+ <br>
+ <br>
+ <span style="font-weight: bold;">OS X</span><br>
+ <br>
+ Please note the installation <a href="Installing_OSX.html#HCFR">instructions</a>.<br>
+ <br>
+ <span style="font-weight: bold;">Operation:</span><br>
+ <span style="font-weight: bold;"><span style="font-weight: bold;"></span></span><br>
+ The accuracy of this instrument does not seem to be comparable to
+ the commercial instruments when used for measuring displays,
+ particularly in the area of measuring dark colors, and I've seen the
+ best results when used with a CRT display. It may well give good
+ results in calibrating projectors, since this was what it was
+ designed to do.<br>
+ <br>
+ The Display Selections for this instrument are:<br>
+ <br>
&nbsp;&nbsp;&nbsp; <span style="font-weight: bold;">l</span>&nbsp;&nbsp;&nbsp;&nbsp;
@@ -2178,8 +2614,20 @@ href="http://www.pantone.com/pages/products/product.aspx?pid=562&amp;ca=2">Huey
- LCD display&nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;&nbsp; A Liquid
- Crystal Display [Default].<br>
+
+
+
+
+
+
+
+
+
+
+
+
+ LCD display&nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;&nbsp; A Liquid
+ Crystal Display [Default].<br>
&nbsp;&nbsp;&nbsp; <span style="font-weight: bold;">c</span>&nbsp;&nbsp;&nbsp;
@@ -2202,13 +2650,86 @@ href="http://www.pantone.com/pages/products/product.aspx?pid=562&amp;ca=2">Huey
- CRT display&nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;&nbsp; A Cathode Ray
- Tube display.<br>
- &nbsp;&nbsp;&nbsp; <b>R</b> &nbsp; Raw&nbsp;
- Reading&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Raw sensor readings,
- used for calibration [CB1]<br>
- <br>
- <br>
- <br>
- </body>
-</html>
+
+
+
+
+
+
+
+
+
+
+
+
+ CRT display&nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;&nbsp; A Cathode Ray
+ Tube display.<br>
+ &nbsp;&nbsp;&nbsp; <b>R</b> &nbsp; Raw&nbsp;
+ Reading&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Raw sensor readings,
+ used for calibration [CB1]<br>
+ <br>
+ <hr style="width: 100%; height: 2px;"><a name="ColorHug"></a><span
+ style="font-weight: bold;" class="titre">ColorHug<br>
+ <br>
+ <img alt="" src="ColorHug.jpg" style="width: 203px; height:
+ 194px;" height="623" width="552"><br>
+ <br>
+ </span><span style="font-weight: bold;">Availability:<br>
+ <br>
+ </span>The <span style="font-weight: bold;" class="titre">ColorHug</span>
+ is a low cost display colorimeter instrument from <span
+ style="font-weight: bold;"></span> <a
+ href="http://www.hughski.com/">Hughski</a>. <br>
+ <br>
+ <span style="font-weight: bold;">Operation:</span><br>
+ <span style="font-weight: bold;"><span style="font-weight: bold;"></span></span><br>
+ Due to the nature of its sensor, the ColorHug accuracy is quite
+ dependent on the instrument calibration matrix. A custom .CCMX will
+ greatly assist it's accuracy, although a workaround is to calibrate
+ your display using its native white point, rather than aiming for
+ some absolute white point such as D65.<br>
+ <br>
+ The Display Selections for this instrument are:<br>
+ <br>
+ &nbsp;&nbsp; <b>l</b>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
+
+
+
+ LCD, CCFL Backlight [Default]<br>
+ &nbsp;&nbsp; <b>c</b>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
+
+
+
+
+ CRT display<br>
+ &nbsp;&nbsp; <b>p</b>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
+
+
+
+
+ Projector<br>
+ &nbsp;&nbsp; <b>e</b>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
+
+
+
+ LCD, White LED Backlight<br>
+ &nbsp;&nbsp; <b>F</b>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
+
+
+
+
+ Factory matrix (For Calibration) [CB1]<br>
+ &nbsp;&nbsp;<b> R</b>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
+
+
+
+
+ Raw Reading (For Factory matrix Calibration) [CB2]<br>
+ <br>
+ <br>
+ <br>
+ <br>
+ <br>
+ <br>
+ </body>
+</html>