summaryrefslogtreecommitdiff
path: root/jpeg/jdapistd.c
diff options
context:
space:
mode:
Diffstat (limited to 'jpeg/jdapistd.c')
-rwxr-xr-xjpeg/jdapistd.c275
1 files changed, 0 insertions, 275 deletions
diff --git a/jpeg/jdapistd.c b/jpeg/jdapistd.c
deleted file mode 100755
index 9d74537..0000000
--- a/jpeg/jdapistd.c
+++ /dev/null
@@ -1,275 +0,0 @@
-/*
- * jdapistd.c
- *
- * Copyright (C) 1994-1996, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains application interface code for the decompression half
- * of the JPEG library. These are the "standard" API routines that are
- * used in the normal full-decompression case. They are not used by a
- * transcoding-only application. Note that if an application links in
- * jpeg_start_decompress, it will end up linking in the entire decompressor.
- * We thus must separate this file from jdapimin.c to avoid linking the
- * whole decompression library into a transcoder.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-
-
-/* Forward declarations */
-LOCAL(boolean) output_pass_setup JPP((j_decompress_ptr cinfo));
-
-
-/*
- * Decompression initialization.
- * jpeg_read_header must be completed before calling this.
- *
- * If a multipass operating mode was selected, this will do all but the
- * last pass, and thus may take a great deal of time.
- *
- * Returns FALSE if suspended. The return value need be inspected only if
- * a suspending data source is used.
- */
-
-GLOBAL(boolean)
-jpeg_start_decompress (j_decompress_ptr cinfo)
-{
- if (cinfo->global_state == DSTATE_READY) {
- /* First call: initialize master control, select active modules */
- jinit_master_decompress(cinfo);
- if (cinfo->buffered_image) {
- /* No more work here; expecting jpeg_start_output next */
- cinfo->global_state = DSTATE_BUFIMAGE;
- return TRUE;
- }
- cinfo->global_state = DSTATE_PRELOAD;
- }
- if (cinfo->global_state == DSTATE_PRELOAD) {
- /* If file has multiple scans, absorb them all into the coef buffer */
- if (cinfo->inputctl->has_multiple_scans) {
-#ifdef D_MULTISCAN_FILES_SUPPORTED
- for (;;) {
- int retcode;
- /* Call progress monitor hook if present */
- if (cinfo->progress != NULL)
- (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo);
- /* Absorb some more input */
- retcode = (*cinfo->inputctl->consume_input) (cinfo);
- if (retcode == JPEG_SUSPENDED)
- return FALSE;
- if (retcode == JPEG_REACHED_EOI)
- break;
- /* Advance progress counter if appropriate */
- if (cinfo->progress != NULL &&
- (retcode == JPEG_ROW_COMPLETED || retcode == JPEG_REACHED_SOS)) {
- if (++cinfo->progress->pass_counter >= cinfo->progress->pass_limit) {
- /* jdmaster underestimated number of scans; ratchet up one scan */
- cinfo->progress->pass_limit += (long) cinfo->total_iMCU_rows;
- }
- }
- }
-#else
- ERREXIT(cinfo, JERR_NOT_COMPILED);
-#endif /* D_MULTISCAN_FILES_SUPPORTED */
- }
- cinfo->output_scan_number = cinfo->input_scan_number;
- } else if (cinfo->global_state != DSTATE_PRESCAN)
- ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
- /* Perform any dummy output passes, and set up for the final pass */
- return output_pass_setup(cinfo);
-}
-
-
-/*
- * Set up for an output pass, and perform any dummy pass(es) needed.
- * Common subroutine for jpeg_start_decompress and jpeg_start_output.
- * Entry: global_state = DSTATE_PRESCAN only if previously suspended.
- * Exit: If done, returns TRUE and sets global_state for proper output mode.
- * If suspended, returns FALSE and sets global_state = DSTATE_PRESCAN.
- */
-
-LOCAL(boolean)
-output_pass_setup (j_decompress_ptr cinfo)
-{
- if (cinfo->global_state != DSTATE_PRESCAN) {
- /* First call: do pass setup */
- (*cinfo->master->prepare_for_output_pass) (cinfo);
- cinfo->output_scanline = 0;
- cinfo->global_state = DSTATE_PRESCAN;
- }
- /* Loop over any required dummy passes */
- while (cinfo->master->is_dummy_pass) {
-#ifdef QUANT_2PASS_SUPPORTED
- /* Crank through the dummy pass */
- while (cinfo->output_scanline < cinfo->output_height) {
- JDIMENSION last_scanline;
- /* Call progress monitor hook if present */
- if (cinfo->progress != NULL) {
- cinfo->progress->pass_counter = (long) cinfo->output_scanline;
- cinfo->progress->pass_limit = (long) cinfo->output_height;
- (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo);
- }
- /* Process some data */
- last_scanline = cinfo->output_scanline;
- (*cinfo->main->process_data) (cinfo, (JSAMPARRAY) NULL,
- &cinfo->output_scanline, (JDIMENSION) 0);
- if (cinfo->output_scanline == last_scanline)
- return FALSE; /* No progress made, must suspend */
- }
- /* Finish up dummy pass, and set up for another one */
- (*cinfo->master->finish_output_pass) (cinfo);
- (*cinfo->master->prepare_for_output_pass) (cinfo);
- cinfo->output_scanline = 0;
-#else
- ERREXIT(cinfo, JERR_NOT_COMPILED);
-#endif /* QUANT_2PASS_SUPPORTED */
- }
- /* Ready for application to drive output pass through
- * jpeg_read_scanlines or jpeg_read_raw_data.
- */
- cinfo->global_state = cinfo->raw_data_out ? DSTATE_RAW_OK : DSTATE_SCANNING;
- return TRUE;
-}
-
-
-/*
- * Read some scanlines of data from the JPEG decompressor.
- *
- * The return value will be the number of lines actually read.
- * This may be less than the number requested in several cases,
- * including bottom of image, data source suspension, and operating
- * modes that emit multiple scanlines at a time.
- *
- * Note: we warn about excess calls to jpeg_read_scanlines() since
- * this likely signals an application programmer error. However,
- * an oversize buffer (max_lines > scanlines remaining) is not an error.
- */
-
-GLOBAL(JDIMENSION)
-jpeg_read_scanlines (j_decompress_ptr cinfo, JSAMPARRAY scanlines,
- JDIMENSION max_lines)
-{
- JDIMENSION row_ctr;
-
- if (cinfo->global_state != DSTATE_SCANNING)
- ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
- if (cinfo->output_scanline >= cinfo->output_height) {
- WARNMS(cinfo, JWRN_TOO_MUCH_DATA);
- return 0;
- }
-
- /* Call progress monitor hook if present */
- if (cinfo->progress != NULL) {
- cinfo->progress->pass_counter = (long) cinfo->output_scanline;
- cinfo->progress->pass_limit = (long) cinfo->output_height;
- (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo);
- }
-
- /* Process some data */
- row_ctr = 0;
- (*cinfo->main->process_data) (cinfo, scanlines, &row_ctr, max_lines);
- cinfo->output_scanline += row_ctr;
- return row_ctr;
-}
-
-
-/*
- * Alternate entry point to read raw data.
- * Processes exactly one iMCU row per call, unless suspended.
- */
-
-GLOBAL(JDIMENSION)
-jpeg_read_raw_data (j_decompress_ptr cinfo, JSAMPIMAGE data,
- JDIMENSION max_lines)
-{
- JDIMENSION lines_per_iMCU_row;
-
- if (cinfo->global_state != DSTATE_RAW_OK)
- ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
- if (cinfo->output_scanline >= cinfo->output_height) {
- WARNMS(cinfo, JWRN_TOO_MUCH_DATA);
- return 0;
- }
-
- /* Call progress monitor hook if present */
- if (cinfo->progress != NULL) {
- cinfo->progress->pass_counter = (long) cinfo->output_scanline;
- cinfo->progress->pass_limit = (long) cinfo->output_height;
- (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo);
- }
-
- /* Verify that at least one iMCU row can be returned. */
- lines_per_iMCU_row = cinfo->max_v_samp_factor * cinfo->min_DCT_v_scaled_size;
- if (max_lines < lines_per_iMCU_row)
- ERREXIT(cinfo, JERR_BUFFER_SIZE);
-
- /* Decompress directly into user's buffer. */
- if (! (*cinfo->coef->decompress_data) (cinfo, data))
- return 0; /* suspension forced, can do nothing more */
-
- /* OK, we processed one iMCU row. */
- cinfo->output_scanline += lines_per_iMCU_row;
- return lines_per_iMCU_row;
-}
-
-
-/* Additional entry points for buffered-image mode. */
-
-#ifdef D_MULTISCAN_FILES_SUPPORTED
-
-/*
- * Initialize for an output pass in buffered-image mode.
- */
-
-GLOBAL(boolean)
-jpeg_start_output (j_decompress_ptr cinfo, int scan_number)
-{
- if (cinfo->global_state != DSTATE_BUFIMAGE &&
- cinfo->global_state != DSTATE_PRESCAN)
- ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
- /* Limit scan number to valid range */
- if (scan_number <= 0)
- scan_number = 1;
- if (cinfo->inputctl->eoi_reached &&
- scan_number > cinfo->input_scan_number)
- scan_number = cinfo->input_scan_number;
- cinfo->output_scan_number = scan_number;
- /* Perform any dummy output passes, and set up for the real pass */
- return output_pass_setup(cinfo);
-}
-
-
-/*
- * Finish up after an output pass in buffered-image mode.
- *
- * Returns FALSE if suspended. The return value need be inspected only if
- * a suspending data source is used.
- */
-
-GLOBAL(boolean)
-jpeg_finish_output (j_decompress_ptr cinfo)
-{
- if ((cinfo->global_state == DSTATE_SCANNING ||
- cinfo->global_state == DSTATE_RAW_OK) && cinfo->buffered_image) {
- /* Terminate this pass. */
- /* We do not require the whole pass to have been completed. */
- (*cinfo->master->finish_output_pass) (cinfo);
- cinfo->global_state = DSTATE_BUFPOST;
- } else if (cinfo->global_state != DSTATE_BUFPOST) {
- /* BUFPOST = repeat call after a suspension, anything else is error */
- ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
- }
- /* Read markers looking for SOS or EOI */
- while (cinfo->input_scan_number <= cinfo->output_scan_number &&
- ! cinfo->inputctl->eoi_reached) {
- if ((*cinfo->inputctl->consume_input) (cinfo) == JPEG_SUSPENDED)
- return FALSE; /* Suspend, come back later */
- }
- cinfo->global_state = DSTATE_BUFIMAGE;
- return TRUE;
-}
-
-#endif /* D_MULTISCAN_FILES_SUPPORTED */
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 07:30:09 +0000