summaryrefslogtreecommitdiff
path: root/jpg/ltmain.sh
diff options
context:
space:
mode:
Diffstat (limited to 'jpg/ltmain.sh')
-rw-r--r--jpg/ltmain.sh9655
1 files changed, 0 insertions, 9655 deletions
diff --git a/jpg/ltmain.sh b/jpg/ltmain.sh
deleted file mode 100644
index 63ae69d..0000000
--- a/jpg/ltmain.sh
+++ /dev/null
@@ -1,9655 +0,0 @@
-
-# libtool (GNU libtool) 2.4.2
-# Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006,
-# 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc.
-# This is free software; see the source for copying conditions. There is NO
-# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-
-# GNU Libtool is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# As a special exception to the GNU General Public License,
-# if you distribute this file as part of a program or library that
-# is built using GNU Libtool, you may include this file under the
-# same distribution terms that you use for the rest of that program.
-#
-# GNU Libtool is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with GNU Libtool; see the file COPYING. If not, a copy
-# can be downloaded from http://www.gnu.org/licenses/gpl.html,
-# or obtained by writing to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-
-# Usage: $progname [OPTION]... [MODE-ARG]...
-#
-# Provide generalized library-building support services.
-#
-# --config show all configuration variables
-# --debug enable verbose shell tracing
-# -n, --dry-run display commands without modifying any files
-# --features display basic configuration information and exit
-# --mode=MODE use operation mode MODE
-# --preserve-dup-deps don't remove duplicate dependency libraries
-# --quiet, --silent don't print informational messages
-# --no-quiet, --no-silent
-# print informational messages (default)
-# --no-warn don't display warning messages
-# --tag=TAG use configuration variables from tag TAG
-# -v, --verbose print more informational messages than default
-# --no-verbose don't print the extra informational messages
-# --version print version information
-# -h, --help, --help-all print short, long, or detailed help message
-#
-# MODE must be one of the following:
-#
-# clean remove files from the build directory
-# compile compile a source file into a libtool object
-# execute automatically set library path, then run a program
-# finish complete the installation of libtool libraries
-# install install libraries or executables
-# link create a library or an executable
-# uninstall remove libraries from an installed directory
-#
-# MODE-ARGS vary depending on the MODE. When passed as first option,
-# `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that.
-# Try `$progname --help --mode=MODE' for a more detailed description of MODE.
-#
-# When reporting a bug, please describe a test case to reproduce it and
-# include the following information:
-#
-# host-triplet: $host
-# shell: $SHELL
-# compiler: $LTCC
-# compiler flags: $LTCFLAGS
-# linker: $LD (gnu? $with_gnu_ld)
-# $progname: (GNU libtool) 2.4.2
-# automake: $automake_version
-# autoconf: $autoconf_version
-#
-# Report bugs to <bug-libtool@gnu.org>.
-# GNU libtool home page: <http://www.gnu.org/software/libtool/>.
-# General help using GNU software: <http://www.gnu.org/gethelp/>.
-
-PROGRAM=libtool
-PACKAGE=libtool
-VERSION=2.4.2
-TIMESTAMP=""
-package_revision=1.3337
-
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
- emulate sh
- NULLCMD=:
- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
- setopt NO_GLOB_SUBST
-else
- case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
-fi
-BIN_SH=xpg4; export BIN_SH # for Tru64
-DUALCASE=1; export DUALCASE # for MKS sh
-
-# A function that is used when there is no print builtin or printf.
-func_fallback_echo ()
-{
- eval 'cat <<_LTECHO_EOF
-$1
-_LTECHO_EOF'
-}
-
-# NLS nuisances: We save the old values to restore during execute mode.
-lt_user_locale=
-lt_safe_locale=
-for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
-do
- eval "if test \"\${$lt_var+set}\" = set; then
- save_$lt_var=\$$lt_var
- $lt_var=C
- export $lt_var
- lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\"
- lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
- fi"
-done
-LC_ALL=C
-LANGUAGE=C
-export LANGUAGE LC_ALL
-
-$lt_unset CDPATH
-
-
-# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
-# is ksh but when the shell is invoked as "sh" and the current value of
-# the _XPG environment variable is not equal to 1 (one), the special
-# positional parameter $0, within a function call, is the name of the
-# function.
-progpath="$0"
-
-
-
-: ${CP="cp -f"}
-test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'}
-: ${MAKE="make"}
-: ${MKDIR="mkdir"}
-: ${MV="mv -f"}
-: ${RM="rm -f"}
-: ${SHELL="${CONFIG_SHELL-/bin/sh}"}
-: ${Xsed="$SED -e 1s/^X//"}
-
-# Global variables:
-EXIT_SUCCESS=0
-EXIT_FAILURE=1
-EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing.
-EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake.
-
-exit_status=$EXIT_SUCCESS
-
-# Make sure IFS has a sensible default
-lt_nl='
-'
-IFS=" $lt_nl"
-
-dirname="s,/[^/]*$,,"
-basename="s,^.*/,,"
-
-# func_dirname file append nondir_replacement
-# Compute the dirname of FILE. If nonempty, add APPEND to the result,
-# otherwise set result to NONDIR_REPLACEMENT.
-func_dirname ()
-{
- func_dirname_result=`$ECHO "${1}" | $SED "$dirname"`
- if test "X$func_dirname_result" = "X${1}"; then
- func_dirname_result="${3}"
- else
- func_dirname_result="$func_dirname_result${2}"
- fi
-} # func_dirname may be replaced by extended shell implementation
-
-
-# func_basename file
-func_basename ()
-{
- func_basename_result=`$ECHO "${1}" | $SED "$basename"`
-} # func_basename may be replaced by extended shell implementation
-
-
-# func_dirname_and_basename file append nondir_replacement
-# perform func_basename and func_dirname in a single function
-# call:
-# dirname: Compute the dirname of FILE. If nonempty,
-# add APPEND to the result, otherwise set result
-# to NONDIR_REPLACEMENT.
-# value returned in "$func_dirname_result"
-# basename: Compute filename of FILE.
-# value retuned in "$func_basename_result"
-# Implementation must be kept synchronized with func_dirname
-# and func_basename. For efficiency, we do not delegate to
-# those functions but instead duplicate the functionality here.
-func_dirname_and_basename ()
-{
- # Extract subdirectory from the argument.
- func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"`
- if test "X$func_dirname_result" = "X${1}"; then
- func_dirname_result="${3}"
- else
- func_dirname_result="$func_dirname_result${2}"
- fi
- func_basename_result=`$ECHO "${1}" | $SED -e "$basename"`
-} # func_dirname_and_basename may be replaced by extended shell implementation
-
-
-# func_stripname prefix suffix name
-# strip PREFIX and SUFFIX off of NAME.
-# PREFIX and SUFFIX must not contain globbing or regex special
-# characters, hashes, percent signs, but SUFFIX may contain a leading
-# dot (in which case that matches only a dot).
-# func_strip_suffix prefix name
-func_stripname ()
-{
- case ${2} in
- .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
- *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
- esac
-} # func_stripname may be replaced by extended shell implementation
-
-
-# These SED scripts presuppose an absolute path with a trailing slash.
-pathcar='s,^/\([^/]*\).*$,\1,'
-pathcdr='s,^/[^/]*,,'
-removedotparts=':dotsl
- s@/\./@/@g
- t dotsl
- s,/\.$,/,'
-collapseslashes='s@/\{1,\}@/@g'
-finalslash='s,/*$,/,'
-
-# func_normal_abspath PATH
-# Remove doubled-up and trailing slashes, "." path components,
-# and cancel out any ".." path components in PATH after making
-# it an absolute path.
-# value returned in "$func_normal_abspath_result"
-func_normal_abspath ()
-{
- # Start from root dir and reassemble the path.
- func_normal_abspath_result=
- func_normal_abspath_tpath=$1
- func_normal_abspath_altnamespace=
- case $func_normal_abspath_tpath in
- "")
- # Empty path, that just means $cwd.
- func_stripname '' '/' "`pwd`"
- func_normal_abspath_result=$func_stripname_result
- return
- ;;
- # The next three entries are used to spot a run of precisely
- # two leading slashes without using negated character classes;
- # we take advantage of case's first-match behaviour.
- ///*)
- # Unusual form of absolute path, do nothing.
- ;;
- //*)
- # Not necessarily an ordinary path; POSIX reserves leading '//'
- # and for example Cygwin uses it to access remote file shares
- # over CIFS/SMB, so we conserve a leading double slash if found.
- func_normal_abspath_altnamespace=/
- ;;
- /*)
- # Absolute path, do nothing.
- ;;
- *)
- # Relative path, prepend $cwd.
- func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath
- ;;
- esac
- # Cancel out all the simple stuff to save iterations. We also want
- # the path to end with a slash for ease of parsing, so make sure
- # there is one (and only one) here.
- func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
- -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"`
- while :; do
- # Processed it all yet?
- if test "$func_normal_abspath_tpath" = / ; then
- # If we ascended to the root using ".." the result may be empty now.
- if test -z "$func_normal_abspath_result" ; then
- func_normal_abspath_result=/
- fi
- break
- fi
- func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \
- -e "$pathcar"`
- func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
- -e "$pathcdr"`
- # Figure out what to do with it
- case $func_normal_abspath_tcomponent in
- "")
- # Trailing empty path component, ignore it.
- ;;
- ..)
- # Parent dir; strip last assembled component from result.
- func_dirname "$func_normal_abspath_result"
- func_normal_abspath_result=$func_dirname_result
- ;;
- *)
- # Actual path component, append it.
- func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent
- ;;
- esac
- done
- # Restore leading double-slash if one was found on entry.
- func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result
-}
-
-# func_relative_path SRCDIR DSTDIR
-# generates a relative path from SRCDIR to DSTDIR, with a trailing
-# slash if non-empty, suitable for immediately appending a filename
-# without needing to append a separator.
-# value returned in "$func_relative_path_result"
-func_relative_path ()
-{
- func_relative_path_result=
- func_normal_abspath "$1"
- func_relative_path_tlibdir=$func_normal_abspath_result
- func_normal_abspath "$2"
- func_relative_path_tbindir=$func_normal_abspath_result
-
- # Ascend the tree starting from libdir
- while :; do
- # check if we have found a prefix of bindir
- case $func_relative_path_tbindir in
- $func_relative_path_tlibdir)
- # found an exact match
- func_relative_path_tcancelled=
- break
- ;;
- $func_relative_path_tlibdir*)
- # found a matching prefix
- func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir"
- func_relative_path_tcancelled=$func_stripname_result
- if test -z "$func_relative_path_result"; then
- func_relative_path_result=.
- fi
- break
- ;;
- *)
- func_dirname $func_relative_path_tlibdir
- func_relative_path_tlibdir=${func_dirname_result}
- if test "x$func_relative_path_tlibdir" = x ; then
- # Have to descend all the way to the root!
- func_relative_path_result=../$func_relative_path_result
- func_relative_path_tcancelled=$func_relative_path_tbindir
- break
- fi
- func_relative_path_result=../$func_relative_path_result
- ;;
- esac
- done
-
- # Now calculate path; take care to avoid doubling-up slashes.
- func_stripname '' '/' "$func_relative_path_result"
- func_relative_path_result=$func_stripname_result
- func_stripname '/' '/' "$func_relative_path_tcancelled"
- if test "x$func_stripname_result" != x ; then
- func_relative_path_result=${func_relative_path_result}/${func_stripname_result}
- fi
-
- # Normalisation. If bindir is libdir, return empty string,
- # else relative path ending with a slash; either way, target
- # file name can be directly appended.
- if test ! -z "$func_relative_path_result"; then
- func_stripname './' '' "$func_relative_path_result/"
- func_relative_path_result=$func_stripname_result
- fi
-}
-
-# The name of this program:
-func_dirname_and_basename "$progpath"
-progname=$func_basename_result
-
-# Make sure we have an absolute path for reexecution:
-case $progpath in
- [\\/]*|[A-Za-z]:\\*) ;;
- *[\\/]*)
- progdir=$func_dirname_result
- progdir=`cd "$progdir" && pwd`
- progpath="$progdir/$progname"
- ;;
- *)
- save_IFS="$IFS"
- IFS=${PATH_SEPARATOR-:}
- for progdir in $PATH; do
- IFS="$save_IFS"
- test -x "$progdir/$progname" && break
- done
- IFS="$save_IFS"
- test -n "$progdir" || progdir=`pwd`
- progpath="$progdir/$progname"
- ;;
-esac
-
-# Sed substitution that helps us do robust quoting. It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed="${SED}"' -e 1s/^X//'
-sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
-
-# Same as above, but do not quote variable references.
-double_quote_subst='s/\(["`\\]\)/\\\1/g'
-
-# Sed substitution that turns a string into a regex matching for the
-# string literally.
-sed_make_literal_regex='s,[].[^$\\*\/],\\&,g'
-
-# Sed substitution that converts a w32 file name or path
-# which contains forward slashes, into one that contains
-# (escaped) backslashes. A very naive implementation.
-lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
-
-# Re-`\' parameter expansions in output of double_quote_subst that were
-# `\'-ed in input to the same. If an odd number of `\' preceded a '$'
-# in input to double_quote_subst, that '$' was protected from expansion.
-# Since each input `\' is now two `\'s, look for any number of runs of
-# four `\'s followed by two `\'s and then a '$'. `\' that '$'.
-bs='\\'
-bs2='\\\\'
-bs4='\\\\\\\\'
-dollar='\$'
-sed_double_backslash="\
- s/$bs4/&\\
-/g
- s/^$bs2$dollar/$bs&/
- s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g
- s/\n//g"
-
-# Standard options:
-opt_dry_run=false
-opt_help=false
-opt_quiet=false
-opt_verbose=false
-opt_warning=:
-
-# func_echo arg...
-# Echo program name prefixed message, along with the current mode
-# name if it has been set yet.
-func_echo ()
-{
- $ECHO "$progname: ${opt_mode+$opt_mode: }$*"
-}
-
-# func_verbose arg...
-# Echo program name prefixed message in verbose mode only.
-func_verbose ()
-{
- $opt_verbose && func_echo ${1+"$@"}
-
- # A bug in bash halts the script if the last line of a function
- # fails when set -e is in force, so we need another command to
- # work around that:
- :
-}
-
-# func_echo_all arg...
-# Invoke $ECHO with all args, space-separated.
-func_echo_all ()
-{
- $ECHO "$*"
-}
-
-# func_error arg...
-# Echo program name prefixed message to standard error.
-func_error ()
-{
- $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2
-}
-
-# func_warning arg...
-# Echo program name prefixed warning message to standard error.
-func_warning ()
-{
- $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2
-
- # bash bug again:
- :
-}
-
-# func_fatal_error arg...
-# Echo program name prefixed message to standard error, and exit.
-func_fatal_error ()
-{
- func_error ${1+"$@"}
- exit $EXIT_FAILURE
-}
-
-# func_fatal_help arg...
-# Echo program name prefixed message to standard error, followed by
-# a help hint, and exit.
-func_fatal_help ()
-{
- func_error ${1+"$@"}
- func_fatal_error "$help"
-}
-help="Try \`$progname --help' for more information." ## default
-
-
-# func_grep expression filename
-# Check whether EXPRESSION matches any line of FILENAME, without output.
-func_grep ()
-{
- $GREP "$1" "$2" >/dev/null 2>&1
-}
-
-
-# func_mkdir_p directory-path
-# Make sure the entire path to DIRECTORY-PATH is available.
-func_mkdir_p ()
-{
- my_directory_path="$1"
- my_dir_list=
-
- if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then
-
- # Protect directory names starting with `-'
- case $my_directory_path in
- -*) my_directory_path="./$my_directory_path" ;;
- esac
-
- # While some portion of DIR does not yet exist...
- while test ! -d "$my_directory_path"; do
- # ...make a list in topmost first order. Use a colon delimited
- # list incase some portion of path contains whitespace.
- my_dir_list="$my_directory_path:$my_dir_list"
-
- # If the last portion added has no slash in it, the list is done
- case $my_directory_path in */*) ;; *) break ;; esac
-
- # ...otherwise throw away the child directory and loop
- my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"`
- done
- my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'`
-
- save_mkdir_p_IFS="$IFS"; IFS=':'
- for my_dir in $my_dir_list; do
- IFS="$save_mkdir_p_IFS"
- # mkdir can fail with a `File exist' error if two processes
- # try to create one of the directories concurrently. Don't
- # stop in that case!
- $MKDIR "$my_dir" 2>/dev/null || :
- done
- IFS="$save_mkdir_p_IFS"
-
- # Bail out if we (or some other process) failed to create a directory.
- test -d "$my_directory_path" || \
- func_fatal_error "Failed to create \`$1'"
- fi
-}
-
-
-# func_mktempdir [string]
-# Make a temporary directory that won't clash with other running
-# libtool processes, and avoids race conditions if possible. If
-# given, STRING is the basename for that directory.
-func_mktempdir ()
-{
- my_template="${TMPDIR-/tmp}/${1-$progname}"
-
- if test "$opt_dry_run" = ":"; then
- # Return a directory name, but don't create it in dry-run mode
- my_tmpdir="${my_template}-$$"
- else
-
- # If mktemp works, use that first and foremost
- my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
-
- if test ! -d "$my_tmpdir"; then
- # Failing that, at least try and use $RANDOM to avoid a race
- my_tmpdir="${my_template}-${RANDOM-0}$$"
-
- save_mktempdir_umask=`umask`
- umask 0077
- $MKDIR "$my_tmpdir"
- umask $save_mktempdir_umask
- fi
-
- # If we're not in dry-run mode, bomb out on failure
- test -d "$my_tmpdir" || \
- func_fatal_error "cannot create temporary directory \`$my_tmpdir'"
- fi
-
- $ECHO "$my_tmpdir"
-}
-
-
-# func_quote_for_eval arg
-# Aesthetically quote ARG to be evaled later.
-# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT
-# is double-quoted, suitable for a subsequent eval, whereas
-# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters
-# which are still active within double quotes backslashified.
-func_quote_for_eval ()
-{
- case $1 in
- *[\\\`\"\$]*)
- func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;;
- *)
- func_quote_for_eval_unquoted_result="$1" ;;
- esac
-
- case $func_quote_for_eval_unquoted_result in
- # Double-quote args containing shell metacharacters to delay
- # word splitting, command substitution and and variable
- # expansion for a subsequent eval.
- # Many Bourne shells cannot handle close brackets correctly
- # in scan sets, so we specify it separately.
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\""
- ;;
- *)
- func_quote_for_eval_result="$func_quote_for_eval_unquoted_result"
- esac
-}
-
-
-# func_quote_for_expand arg
-# Aesthetically quote ARG to be evaled later; same as above,
-# but do not quote variable references.
-func_quote_for_expand ()
-{
- case $1 in
- *[\\\`\"]*)
- my_arg=`$ECHO "$1" | $SED \
- -e "$double_quote_subst" -e "$sed_double_backslash"` ;;
- *)
- my_arg="$1" ;;
- esac
-
- case $my_arg in
- # Double-quote args containing shell metacharacters to delay
- # word splitting and command substitution for a subsequent eval.
- # Many Bourne shells cannot handle close brackets correctly
- # in scan sets, so we specify it separately.
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- my_arg="\"$my_arg\""
- ;;
- esac
-
- func_quote_for_expand_result="$my_arg"
-}
-
-
-# func_show_eval cmd [fail_exp]
-# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is
-# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
-# is given, then evaluate it.
-func_show_eval ()
-{
- my_cmd="$1"
- my_fail_exp="${2-:}"
-
- ${opt_silent-false} || {
- func_quote_for_expand "$my_cmd"
- eval "func_echo $func_quote_for_expand_result"
- }
-
- if ${opt_dry_run-false}; then :; else
- eval "$my_cmd"
- my_status=$?
- if test "$my_status" -eq 0; then :; else
- eval "(exit $my_status); $my_fail_exp"
- fi
- fi
-}
-
-
-# func_show_eval_locale cmd [fail_exp]
-# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is
-# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
-# is given, then evaluate it. Use the saved locale for evaluation.
-func_show_eval_locale ()
-{
- my_cmd="$1"
- my_fail_exp="${2-:}"
-
- ${opt_silent-false} || {
- func_quote_for_expand "$my_cmd"
- eval "func_echo $func_quote_for_expand_result"
- }
-
- if ${opt_dry_run-false}; then :; else
- eval "$lt_user_locale
- $my_cmd"
- my_status=$?
- eval "$lt_safe_locale"
- if test "$my_status" -eq 0; then :; else
- eval "(exit $my_status); $my_fail_exp"
- fi
- fi
-}
-
-# func_tr_sh
-# Turn $1 into a string suitable for a shell variable name.
-# Result is stored in $func_tr_sh_result. All characters
-# not in the set a-zA-Z0-9_ are replaced with '_'. Further,
-# if $1 begins with a digit, a '_' is prepended as well.
-func_tr_sh ()
-{
- case $1 in
- [0-9]* | *[!a-zA-Z0-9_]*)
- func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'`
- ;;
- * )
- func_tr_sh_result=$1
- ;;
- esac
-}
-
-
-# func_version
-# Echo version message to standard output and exit.
-func_version ()
-{
- $opt_debug
-
- $SED -n '/(C)/!b go
- :more
- /\./!{
- N
- s/\n# / /
- b more
- }
- :go
- /^# '$PROGRAM' (GNU /,/# warranty; / {
- s/^# //
- s/^# *$//
- s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
- p
- }' < "$progpath"
- exit $?
-}
-
-# func_usage
-# Echo short help message to standard output and exit.
-func_usage ()
-{
- $opt_debug
-
- $SED -n '/^# Usage:/,/^# *.*--help/ {
- s/^# //
- s/^# *$//
- s/\$progname/'$progname'/
- p
- }' < "$progpath"
- echo
- $ECHO "run \`$progname --help | more' for full usage"
- exit $?
-}
-
-# func_help [NOEXIT]
-# Echo long help message to standard output and exit,
-# unless 'noexit' is passed as argument.
-func_help ()
-{
- $opt_debug
-
- $SED -n '/^# Usage:/,/# Report bugs to/ {
- :print
- s/^# //
- s/^# *$//
- s*\$progname*'$progname'*
- s*\$host*'"$host"'*
- s*\$SHELL*'"$SHELL"'*
- s*\$LTCC*'"$LTCC"'*
- s*\$LTCFLAGS*'"$LTCFLAGS"'*
- s*\$LD*'"$LD"'*
- s/\$with_gnu_ld/'"$with_gnu_ld"'/
- s/\$automake_version/'"`(${AUTOMAKE-automake} --version) 2>/dev/null |$SED 1q`"'/
- s/\$autoconf_version/'"`(${AUTOCONF-autoconf} --version) 2>/dev/null |$SED 1q`"'/
- p
- d
- }
- /^# .* home page:/b print
- /^# General help using/b print
- ' < "$progpath"
- ret=$?
- if test -z "$1"; then
- exit $ret
- fi
-}
-
-# func_missing_arg argname
-# Echo program name prefixed message to standard error and set global
-# exit_cmd.
-func_missing_arg ()
-{
- $opt_debug
-
- func_error "missing argument for $1."
- exit_cmd=exit
-}
-
-
-# func_split_short_opt shortopt
-# Set func_split_short_opt_name and func_split_short_opt_arg shell
-# variables after splitting SHORTOPT after the 2nd character.
-func_split_short_opt ()
-{
- my_sed_short_opt='1s/^\(..\).*$/\1/;q'
- my_sed_short_rest='1s/^..\(.*\)$/\1/;q'
-
- func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"`
- func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"`
-} # func_split_short_opt may be replaced by extended shell implementation
-
-
-# func_split_long_opt longopt
-# Set func_split_long_opt_name and func_split_long_opt_arg shell
-# variables after splitting LONGOPT at the `=' sign.
-func_split_long_opt ()
-{
- my_sed_long_opt='1s/^\(--[^=]*\)=.*/\1/;q'
- my_sed_long_arg='1s/^--[^=]*=//'
-
- func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"`
- func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"`
-} # func_split_long_opt may be replaced by extended shell implementation
-
-exit_cmd=:
-
-
-
-
-
-magic="%%%MAGIC variable%%%"
-magic_exe="%%%MAGIC EXE variable%%%"
-
-# Global variables.
-nonopt=
-preserve_args=
-lo2o="s/\\.lo\$/.${objext}/"
-o2lo="s/\\.${objext}\$/.lo/"
-extracted_archives=
-extracted_serial=0
-
-# If this variable is set in any of the actions, the command in it
-# will be execed at the end. This prevents here-documents from being
-# left over by shells.
-exec_cmd=
-
-# func_append var value
-# Append VALUE to the end of shell variable VAR.
-func_append ()
-{
- eval "${1}=\$${1}\${2}"
-} # func_append may be replaced by extended shell implementation
-
-# func_append_quoted var value
-# Quote VALUE and append to the end of shell variable VAR, separated
-# by a space.
-func_append_quoted ()
-{
- func_quote_for_eval "${2}"
- eval "${1}=\$${1}\\ \$func_quote_for_eval_result"
-} # func_append_quoted may be replaced by extended shell implementation
-
-
-# func_arith arithmetic-term...
-func_arith ()
-{
- func_arith_result=`expr "${@}"`
-} # func_arith may be replaced by extended shell implementation
-
-
-# func_len string
-# STRING may not start with a hyphen.
-func_len ()
-{
- func_len_result=`expr "${1}" : ".*" 2>/dev/null || echo $max_cmd_len`
-} # func_len may be replaced by extended shell implementation
-
-
-# func_lo2o object
-func_lo2o ()
-{
- func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"`
-} # func_lo2o may be replaced by extended shell implementation
-
-
-# func_xform libobj-or-source
-func_xform ()
-{
- func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'`
-} # func_xform may be replaced by extended shell implementation
-
-
-# func_fatal_configuration arg...
-# Echo program name prefixed message to standard error, followed by
-# a configuration failure hint, and exit.
-func_fatal_configuration ()
-{
- func_error ${1+"$@"}
- func_error "See the $PACKAGE documentation for more information."
- func_fatal_error "Fatal configuration error."
-}
-
-
-# func_config
-# Display the configuration for all the tags in this script.
-func_config ()
-{
- re_begincf='^# ### BEGIN LIBTOOL'
- re_endcf='^# ### END LIBTOOL'
-
- # Default configuration.
- $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath"
-
- # Now print the configurations for the tags.
- for tagname in $taglist; do
- $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath"
- done
-
- exit $?
-}
-
-# func_features
-# Display the features supported by this script.
-func_features ()
-{
- echo "host: $host"
- if test "$build_libtool_libs" = yes; then
- echo "enable shared libraries"
- else
- echo "disable shared libraries"
- fi
- if test "$build_old_libs" = yes; then
- echo "enable static libraries"
- else
- echo "disable static libraries"
- fi
-
- exit $?
-}
-
-# func_enable_tag tagname
-# Verify that TAGNAME is valid, and either flag an error and exit, or
-# enable the TAGNAME tag. We also add TAGNAME to the global $taglist
-# variable here.
-func_enable_tag ()
-{
- # Global variable:
- tagname="$1"
-
- re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
- re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
- sed_extractcf="/$re_begincf/,/$re_endcf/p"
-
- # Validate tagname.
- case $tagname in
- *[!-_A-Za-z0-9,/]*)
- func_fatal_error "invalid tag name: $tagname"
- ;;
- esac
-
- # Don't test for the "default" C tag, as we know it's
- # there but not specially marked.
- case $tagname in
- CC) ;;
- *)
- if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
- taglist="$taglist $tagname"
-
- # Evaluate the configuration. Be careful to quote the path
- # and the sed script, to avoid splitting on whitespace, but
- # also don't use non-portable quotes within backquotes within
- # quotes we have to do it in 2 steps:
- extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
- eval "$extractedcf"
- else
- func_error "ignoring unknown tag $tagname"
- fi
- ;;
- esac
-}
-
-# func_check_version_match
-# Ensure that we are using m4 macros, and libtool script from the same
-# release of libtool.
-func_check_version_match ()
-{
- if test "$package_revision" != "$macro_revision"; then
- if test "$VERSION" != "$macro_version"; then
- if test -z "$macro_version"; then
- cat >&2 <<_LT_EOF
-$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
-$progname: definition of this LT_INIT comes from an older release.
-$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
-$progname: and run autoconf again.
-_LT_EOF
- else
- cat >&2 <<_LT_EOF
-$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
-$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
-$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
-$progname: and run autoconf again.
-_LT_EOF
- fi
- else
- cat >&2 <<_LT_EOF
-$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision,
-$progname: but the definition of this LT_INIT comes from revision $macro_revision.
-$progname: You should recreate aclocal.m4 with macros from revision $package_revision
-$progname: of $PACKAGE $VERSION and run autoconf again.
-_LT_EOF
- fi
-
- exit $EXIT_MISMATCH
- fi
-}
-
-
-# Shorthand for --mode=foo, only valid as the first argument
-case $1 in
-clean|clea|cle|cl)
- shift; set dummy --mode clean ${1+"$@"}; shift
- ;;
-compile|compil|compi|comp|com|co|c)
- shift; set dummy --mode compile ${1+"$@"}; shift
- ;;
-execute|execut|execu|exec|exe|ex|e)
- shift; set dummy --mode execute ${1+"$@"}; shift
- ;;
-finish|finis|fini|fin|fi|f)
- shift; set dummy --mode finish ${1+"$@"}; shift
- ;;
-install|instal|insta|inst|ins|in|i)
- shift; set dummy --mode install ${1+"$@"}; shift
- ;;
-link|lin|li|l)
- shift; set dummy --mode link ${1+"$@"}; shift
- ;;
-uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
- shift; set dummy --mode uninstall ${1+"$@"}; shift
- ;;
-esac
-
-
-
-# Option defaults:
-opt_debug=:
-opt_dry_run=false
-opt_config=false
-opt_preserve_dup_deps=false
-opt_features=false
-opt_finish=false
-opt_help=false
-opt_help_all=false
-opt_silent=:
-opt_warning=:
-opt_verbose=:
-opt_silent=false
-opt_verbose=false
-
-
-# Parse options once, thoroughly. This comes as soon as possible in the
-# script to make things like `--version' happen as quickly as we can.
-{
- # this just eases exit handling
- while test $# -gt 0; do
- opt="$1"
- shift
- case $opt in
- --debug|-x) opt_debug='set -x'
- func_echo "enabling shell trace mode"
- $opt_debug
- ;;
- --dry-run|--dryrun|-n)
- opt_dry_run=:
- ;;
- --config)
- opt_config=:
-func_config
- ;;
- --dlopen|-dlopen)
- optarg="$1"
- opt_dlopen="${opt_dlopen+$opt_dlopen
-}$optarg"
- shift
- ;;
- --preserve-dup-deps)
- opt_preserve_dup_deps=:
- ;;
- --features)
- opt_features=:
-func_features
- ;;
- --finish)
- opt_finish=:
-set dummy --mode finish ${1+"$@"}; shift
- ;;
- --help)
- opt_help=:
- ;;
- --help-all)
- opt_help_all=:
-opt_help=': help-all'
- ;;
- --mode)
- test $# = 0 && func_missing_arg $opt && break
- optarg="$1"
- opt_mode="$optarg"
-case $optarg in
- # Valid mode arguments:
- clean|compile|execute|finish|install|link|relink|uninstall) ;;
-
- # Catch anything else as an error
- *) func_error "invalid argument for $opt"
- exit_cmd=exit
- break
- ;;
-esac
- shift
- ;;
- --no-silent|--no-quiet)
- opt_silent=false
-func_append preserve_args " $opt"
- ;;
- --no-warning|--no-warn)
- opt_warning=false
-func_append preserve_args " $opt"
- ;;
- --no-verbose)
- opt_verbose=false
-func_append preserve_args " $opt"
- ;;
- --silent|--quiet)
- opt_silent=:
-func_append preserve_args " $opt"
- opt_verbose=false
- ;;
- --verbose|-v)
- opt_verbose=:
-func_append preserve_args " $opt"
-opt_silent=false
- ;;
- --tag)
- test $# = 0 && func_missing_arg $opt && break
- optarg="$1"
- opt_tag="$optarg"
-func_append preserve_args " $opt $optarg"
-func_enable_tag "$optarg"
- shift
- ;;
-
- -\?|-h) func_usage ;;
- --help) func_help ;;
- --version) func_version ;;
-
- # Separate optargs to long options:
- --*=*)
- func_split_long_opt "$opt"
- set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"}
- shift
- ;;
-
- # Separate non-argument short options:
- -\?*|-h*|-n*|-v*)
- func_split_short_opt "$opt"
- set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"}
- shift
- ;;
-
- --) break ;;
- -*) func_fatal_help "unrecognized option \`$opt'" ;;
- *) set dummy "$opt" ${1+"$@"}; shift; break ;;
- esac
- done
-
- # Validate options:
-
- # save first non-option argument
- if test "$#" -gt 0; then
- nonopt="$opt"
- shift
- fi
-
- # preserve --debug
- test "$opt_debug" = : || func_append preserve_args " --debug"
-
- case $host in
- *cygwin* | *mingw* | *pw32* | *cegcc*)
- # don't eliminate duplications in $postdeps and $predeps
- opt_duplicate_compiler_generated_deps=:
- ;;
- *)
- opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps
- ;;
- esac
-
- $opt_help || {
- # Sanity checks first:
- func_check_version_match
-
- if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
- func_fatal_configuration "not configured to build any kind of library"
- fi
-
- # Darwin sucks
- eval std_shrext=\"$shrext_cmds\"
-
- # Only execute mode is allowed to have -dlopen flags.
- if test -n "$opt_dlopen" && test "$opt_mode" != execute; then
- func_error "unrecognized option \`-dlopen'"
- $ECHO "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- # Change the help message to a mode-specific one.
- generic_help="$help"
- help="Try \`$progname --help --mode=$opt_mode' for more information."
- }
-
-
- # Bail if the options were screwed
- $exit_cmd $EXIT_FAILURE
-}
-
-
-
-
-## ----------- ##
-## Main. ##
-## ----------- ##
-
-# func_lalib_p file
-# True iff FILE is a libtool `.la' library or `.lo' object file.
-# This function is only a basic sanity check; it will hardly flush out
-# determined imposters.
-func_lalib_p ()
-{
- test -f "$1" &&
- $SED -e 4q "$1" 2>/dev/null \
- | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
-}
-
-# func_lalib_unsafe_p file
-# True iff FILE is a libtool `.la' library or `.lo' object file.
-# This function implements the same check as func_lalib_p without
-# resorting to external programs. To this end, it redirects stdin and
-# closes it afterwards, without saving the original file descriptor.
-# As a safety measure, use it only where a negative result would be
-# fatal anyway. Works if `file' does not exist.
-func_lalib_unsafe_p ()
-{
- lalib_p=no
- if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then
- for lalib_p_l in 1 2 3 4
- do
- read lalib_p_line
- case "$lalib_p_line" in
- \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;
- esac
- done
- exec 0<&5 5<&-
- fi
- test "$lalib_p" = yes
-}
-
-# func_ltwrapper_script_p file
-# True iff FILE is a libtool wrapper script
-# This function is only a basic sanity check; it will hardly flush out
-# determined imposters.
-func_ltwrapper_script_p ()
-{
- func_lalib_p "$1"
-}
-
-# func_ltwrapper_executable_p file
-# True iff FILE is a libtool wrapper executable
-# This function is only a basic sanity check; it will hardly flush out
-# determined imposters.
-func_ltwrapper_executable_p ()
-{
- func_ltwrapper_exec_suffix=
- case $1 in
- *.exe) ;;
- *) func_ltwrapper_exec_suffix=.exe ;;
- esac
- $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1
-}
-
-# func_ltwrapper_scriptname file
-# Assumes file is an ltwrapper_executable
-# uses $file to determine the appropriate filename for a
-# temporary ltwrapper_script.
-func_ltwrapper_scriptname ()
-{
- func_dirname_and_basename "$1" "" "."
- func_stripname '' '.exe' "$func_basename_result"
- func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
-}
-
-# func_ltwrapper_p file
-# True iff FILE is a libtool wrapper script or wrapper executable
-# This function is only a basic sanity check; it will hardly flush out
-# determined imposters.
-func_ltwrapper_p ()
-{
- func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1"
-}
-
-
-# func_execute_cmds commands fail_cmd
-# Execute tilde-delimited COMMANDS.
-# If FAIL_CMD is given, eval that upon failure.
-# FAIL_CMD may read-access the current command in variable CMD!
-func_execute_cmds ()
-{
- $opt_debug
- save_ifs=$IFS; IFS='~'
- for cmd in $1; do
- IFS=$save_ifs
- eval cmd=\"$cmd\"
- func_show_eval "$cmd" "${2-:}"
- done
- IFS=$save_ifs
-}
-
-
-# func_source file
-# Source FILE, adding directory component if necessary.
-# Note that it is not necessary on cygwin/mingw to append a dot to
-# FILE even if both FILE and FILE.exe exist: automatic-append-.exe
-# behavior happens only for exec(3), not for open(2)! Also, sourcing
-# `FILE.' does not work on cygwin managed mounts.
-func_source ()
-{
- $opt_debug
- case $1 in
- */* | *\\*) . "$1" ;;
- *) . "./$1" ;;
- esac
-}
-
-
-# func_resolve_sysroot PATH
-# Replace a leading = in PATH with a sysroot. Store the result into
-# func_resolve_sysroot_result
-func_resolve_sysroot ()
-{
- func_resolve_sysroot_result=$1
- case $func_resolve_sysroot_result in
- =*)
- func_stripname '=' '' "$func_resolve_sysroot_result"
- func_resolve_sysroot_result=$lt_sysroot$func_stripname_result
- ;;
- esac
-}
-
-# func_replace_sysroot PATH
-# If PATH begins with the sysroot, replace it with = and
-# store the result into func_replace_sysroot_result.
-func_replace_sysroot ()
-{
- case "$lt_sysroot:$1" in
- ?*:"$lt_sysroot"*)
- func_stripname "$lt_sysroot" '' "$1"
- func_replace_sysroot_result="=$func_stripname_result"
- ;;
- *)
- # Including no sysroot.
- func_replace_sysroot_result=$1
- ;;
- esac
-}
-
-# func_infer_tag arg
-# Infer tagged configuration to use if any are available and
-# if one wasn't chosen via the "--tag" command line option.
-# Only attempt this if the compiler in the base compile
-# command doesn't match the default compiler.
-# arg is usually of the form 'gcc ...'
-func_infer_tag ()
-{
- $opt_debug
- if test -n "$available_tags" && test -z "$tagname"; then
- CC_quoted=
- for arg in $CC; do
- func_append_quoted CC_quoted "$arg"
- done
- CC_expanded=`func_echo_all $CC`
- CC_quoted_expanded=`func_echo_all $CC_quoted`
- case $@ in
- # Blanks in the command may have been stripped by the calling shell,
- # but not from the CC environment variable when configure was run.
- " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
- " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;;
- # Blanks at the start of $base_compile will cause this to fail
- # if we don't check for them as well.
- *)
- for z in $available_tags; do
- if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
- # Evaluate the configuration.
- eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
- CC_quoted=
- for arg in $CC; do
- # Double-quote args containing other shell metacharacters.
- func_append_quoted CC_quoted "$arg"
- done
- CC_expanded=`func_echo_all $CC`
- CC_quoted_expanded=`func_echo_all $CC_quoted`
- case "$@ " in
- " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
- " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*)
- # The compiler in the base compile command matches
- # the one in the tagged configuration.
- # Assume this is the tagged configuration we want.
- tagname=$z
- break
- ;;
- esac
- fi
- done
- # If $tagname still isn't set, then no tagged configuration
- # was found and let the user know that the "--tag" command
- # line option must be used.
- if test -z "$tagname"; then
- func_echo "unable to infer tagged configuration"
- func_fatal_error "specify a tag with \`--tag'"
-# else
-# func_verbose "using $tagname tagged configuration"
- fi
- ;;
- esac
- fi
-}
-
-
-
-# func_write_libtool_object output_name pic_name nonpic_name
-# Create a libtool object file (analogous to a ".la" file),
-# but don't create it if we're doing a dry run.
-func_write_libtool_object ()
-{
- write_libobj=${1}
- if test "$build_libtool_libs" = yes; then
- write_lobj=\'${2}\'
- else
- write_lobj=none
- fi
-
- if test "$build_old_libs" = yes; then
- write_oldobj=\'${3}\'
- else
- write_oldobj=none
- fi
-
- $opt_dry_run || {
- cat >${write_libobj}T <<EOF
-# $write_libobj - a libtool object file
-# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
-#
-# Please DO NOT delete this file!
-# It is necessary for linking the library.
-
-# Name of the PIC object.
-pic_object=$write_lobj
-
-# Name of the non-PIC object
-non_pic_object=$write_oldobj
-
-EOF
- $MV "${write_libobj}T" "${write_libobj}"
- }
-}
-
-
-##################################################
-# FILE NAME AND PATH CONVERSION HELPER FUNCTIONS #
-##################################################
-
-# func_convert_core_file_wine_to_w32 ARG
-# Helper function used by file name conversion functions when $build is *nix,
-# and $host is mingw, cygwin, or some other w32 environment. Relies on a
-# correctly configured wine environment available, with the winepath program
-# in $build's $PATH.
-#
-# ARG is the $build file name to be converted to w32 format.
-# Result is available in $func_convert_core_file_wine_to_w32_result, and will
-# be empty on error (or when ARG is empty)
-func_convert_core_file_wine_to_w32 ()
-{
- $opt_debug
- func_convert_core_file_wine_to_w32_result="$1"
- if test -n "$1"; then
- # Unfortunately, winepath does not exit with a non-zero error code, so we
- # are forced to check the contents of stdout. On the other hand, if the
- # command is not found, the shell will set an exit code of 127 and print
- # *an error message* to stdout. So we must check for both error code of
- # zero AND non-empty stdout, which explains the odd construction:
- func_convert_core_file_wine_to_w32_tmp=`winepath -w "$1" 2>/dev/null`
- if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then
- func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" |
- $SED -e "$lt_sed_naive_backslashify"`
- else
- func_convert_core_file_wine_to_w32_result=
- fi
- fi
-}
-# end: func_convert_core_file_wine_to_w32
-
-
-# func_convert_core_path_wine_to_w32 ARG
-# Helper function used by path conversion functions when $build is *nix, and
-# $host is mingw, cygwin, or some other w32 environment. Relies on a correctly
-# configured wine environment available, with the winepath program in $build's
-# $PATH. Assumes ARG has no leading or trailing path separator characters.
-#
-# ARG is path to be converted from $build format to win32.
-# Result is available in $func_convert_core_path_wine_to_w32_result.
-# Unconvertible file (directory) names in ARG are skipped; if no directory names
-# are convertible, then the result may be empty.
-func_convert_core_path_wine_to_w32 ()
-{
- $opt_debug
- # unfortunately, winepath doesn't convert paths, only file names
- func_convert_core_path_wine_to_w32_result=""
- if test -n "$1"; then
- oldIFS=$IFS
- IFS=:
- for func_convert_core_path_wine_to_w32_f in $1; do
- IFS=$oldIFS
- func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f"
- if test -n "$func_convert_core_file_wine_to_w32_result" ; then
- if test -z "$func_convert_core_path_wine_to_w32_result"; then
- func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result"
- else
- func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result"
- fi
- fi
- done
- IFS=$oldIFS
- fi
-}
-# end: func_convert_core_path_wine_to_w32
-
-
-# func_cygpath ARGS...
-# Wrapper around calling the cygpath program via LT_CYGPATH. This is used when
-# when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2)
-# $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or
-# (2), returns the Cygwin file name or path in func_cygpath_result (input
-# file name or path is assumed to be in w32 format, as previously converted
-# from $build's *nix or MSYS format). In case (3), returns the w32 file name
-# or path in func_cygpath_result (input file name or path is assumed to be in
-# Cygwin format). Returns an empty string on error.
-#
-# ARGS are passed to cygpath, with the last one being the file name or path to
-# be converted.
-#
-# Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH
-# environment variable; do not put it in $PATH.
-func_cygpath ()
-{
- $opt_debug
- if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then
- func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null`
- if test "$?" -ne 0; then
- # on failure, ensure result is empty
- func_cygpath_result=
- fi
- else
- func_cygpath_result=
- func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'"
- fi
-}
-#end: func_cygpath
-
-
-# func_convert_core_msys_to_w32 ARG
-# Convert file name or path ARG from MSYS format to w32 format. Return
-# result in func_convert_core_msys_to_w32_result.
-func_convert_core_msys_to_w32 ()
-{
- $opt_debug
- # awkward: cmd appends spaces to result
- func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null |
- $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"`
-}
-#end: func_convert_core_msys_to_w32
-
-
-# func_convert_file_check ARG1 ARG2
-# Verify that ARG1 (a file name in $build format) was converted to $host
-# format in ARG2. Otherwise, emit an error message, but continue (resetting
-# func_to_host_file_result to ARG1).
-func_convert_file_check ()
-{
- $opt_debug
- if test -z "$2" && test -n "$1" ; then
- func_error "Could not determine host file name corresponding to"
- func_error " \`$1'"
- func_error "Continuing, but uninstalled executables may not work."
- # Fallback:
- func_to_host_file_result="$1"
- fi
-}
-# end func_convert_file_check
-
-
-# func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH
-# Verify that FROM_PATH (a path in $build format) was converted to $host
-# format in TO_PATH. Otherwise, emit an error message, but continue, resetting
-# func_to_host_file_result to a simplistic fallback value (see below).
-func_convert_path_check ()
-{
- $opt_debug
- if test -z "$4" && test -n "$3"; then
- func_error "Could not determine the host path corresponding to"
- func_error " \`$3'"
- func_error "Continuing, but uninstalled executables may not work."
- # Fallback. This is a deliberately simplistic "conversion" and
- # should not be "improved". See libtool.info.
- if test "x$1" != "x$2"; then
- lt_replace_pathsep_chars="s|$1|$2|g"
- func_to_host_path_result=`echo "$3" |
- $SED -e "$lt_replace_pathsep_chars"`
- else
- func_to_host_path_result="$3"
- fi
- fi
-}
-# end func_convert_path_check
-
-
-# func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG
-# Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT
-# and appending REPL if ORIG matches BACKPAT.
-func_convert_path_front_back_pathsep ()
-{
- $opt_debug
- case $4 in
- $1 ) func_to_host_path_result="$3$func_to_host_path_result"
- ;;
- esac
- case $4 in
- $2 ) func_append func_to_host_path_result "$3"
- ;;
- esac
-}
-# end func_convert_path_front_back_pathsep
-
-
-##################################################
-# $build to $host FILE NAME CONVERSION FUNCTIONS #
-##################################################
-# invoked via `$to_host_file_cmd ARG'
-#
-# In each case, ARG is the path to be converted from $build to $host format.
-# Result will be available in $func_to_host_file_result.
-
-
-# func_to_host_file ARG
-# Converts the file name ARG from $build format to $host format. Return result
-# in func_to_host_file_result.
-func_to_host_file ()
-{
- $opt_debug
- $to_host_file_cmd "$1"
-}
-# end func_to_host_file
-
-
-# func_to_tool_file ARG LAZY
-# converts the file name ARG from $build format to toolchain format. Return
-# result in func_to_tool_file_result. If the conversion in use is listed
-# in (the comma separated) LAZY, no conversion takes place.
-func_to_tool_file ()
-{
- $opt_debug
- case ,$2, in
- *,"$to_tool_file_cmd",*)
- func_to_tool_file_result=$1
- ;;
- *)
- $to_tool_file_cmd "$1"
- func_to_tool_file_result=$func_to_host_file_result
- ;;
- esac
-}
-# end func_to_tool_file
-
-
-# func_convert_file_noop ARG
-# Copy ARG to func_to_host_file_result.
-func_convert_file_noop ()
-{
- func_to_host_file_result="$1"
-}
-# end func_convert_file_noop
-
-
-# func_convert_file_msys_to_w32 ARG
-# Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic
-# conversion to w32 is not available inside the cwrapper. Returns result in
-# func_to_host_file_result.
-func_convert_file_msys_to_w32 ()
-{
- $opt_debug
- func_to_host_file_result="$1"
- if test -n "$1"; then
- func_convert_core_msys_to_w32 "$1"
- func_to_host_file_result="$func_convert_core_msys_to_w32_result"
- fi
- func_convert_file_check "$1" "$func_to_host_file_result"
-}
-# end func_convert_file_msys_to_w32
-
-
-# func_convert_file_cygwin_to_w32 ARG
-# Convert file name ARG from Cygwin to w32 format. Returns result in
-# func_to_host_file_result.
-func_convert_file_cygwin_to_w32 ()
-{
- $opt_debug
- func_to_host_file_result="$1"
- if test -n "$1"; then
- # because $build is cygwin, we call "the" cygpath in $PATH; no need to use
- # LT_CYGPATH in this case.
- func_to_host_file_result=`cygpath -m "$1"`
- fi
- func_convert_file_check "$1" "$func_to_host_file_result"
-}
-# end func_convert_file_cygwin_to_w32
-
-
-# func_convert_file_nix_to_w32 ARG
-# Convert file name ARG from *nix to w32 format. Requires a wine environment
-# and a working winepath. Returns result in func_to_host_file_result.
-func_convert_file_nix_to_w32 ()
-{
- $opt_debug
- func_to_host_file_result="$1"
- if test -n "$1"; then
- func_convert_core_file_wine_to_w32 "$1"
- func_to_host_file_result="$func_convert_core_file_wine_to_w32_result"
- fi
- func_convert_file_check "$1" "$func_to_host_file_result"
-}
-# end func_convert_file_nix_to_w32
-
-
-# func_convert_file_msys_to_cygwin ARG
-# Convert file name ARG from MSYS to Cygwin format. Requires LT_CYGPATH set.
-# Returns result in func_to_host_file_result.
-func_convert_file_msys_to_cygwin ()
-{
- $opt_debug
- func_to_host_file_result="$1"
- if test -n "$1"; then
- func_convert_core_msys_to_w32 "$1"
- func_cygpath -u "$func_convert_core_msys_to_w32_result"
- func_to_host_file_result="$func_cygpath_result"
- fi
- func_convert_file_check "$1" "$func_to_host_file_result"
-}
-# end func_convert_file_msys_to_cygwin
-
-
-# func_convert_file_nix_to_cygwin ARG
-# Convert file name ARG from *nix to Cygwin format. Requires Cygwin installed
-# in a wine environment, working winepath, and LT_CYGPATH set. Returns result
-# in func_to_host_file_result.
-func_convert_file_nix_to_cygwin ()
-{
- $opt_debug
- func_to_host_file_result="$1"
- if test -n "$1"; then
- # convert from *nix to w32, then use cygpath to convert from w32 to cygwin.
- func_convert_core_file_wine_to_w32 "$1"
- func_cygpath -u "$func_convert_core_file_wine_to_w32_result"
- func_to_host_file_result="$func_cygpath_result"
- fi
- func_convert_file_check "$1" "$func_to_host_file_result"
-}
-# end func_convert_file_nix_to_cygwin
-
-
-#############################################
-# $build to $host PATH CONVERSION FUNCTIONS #
-#############################################
-# invoked via `$to_host_path_cmd ARG'
-#
-# In each case, ARG is the path to be converted from $build to $host format.
-# The result will be available in $func_to_host_path_result.
-#
-# Path separators are also converted from $build format to $host format. If
-# ARG begins or ends with a path separator character, it is preserved (but
-# converted to $host format) on output.
-#
-# All path conversion functions are named using the following convention:
-# file name conversion function : func_convert_file_X_to_Y ()
-# path conversion function : func_convert_path_X_to_Y ()
-# where, for any given $build/$host combination the 'X_to_Y' value is the
-# same. If conversion functions are added for new $build/$host combinations,
-# the two new functions must follow this pattern, or func_init_to_host_path_cmd
-# will break.
-
-
-# func_init_to_host_path_cmd
-# Ensures that function "pointer" variable $to_host_path_cmd is set to the
-# appropriate value, based on the value of $to_host_file_cmd.
-to_host_path_cmd=
-func_init_to_host_path_cmd ()
-{
- $opt_debug
- if test -z "$to_host_path_cmd"; then
- func_stripname 'func_convert_file_' '' "$to_host_file_cmd"
- to_host_path_cmd="func_convert_path_${func_stripname_result}"
- fi
-}
-
-
-# func_to_host_path ARG
-# Converts the path ARG from $build format to $host format. Return result
-# in func_to_host_path_result.
-func_to_host_path ()
-{
- $opt_debug
- func_init_to_host_path_cmd
- $to_host_path_cmd "$1"
-}
-# end func_to_host_path
-
-
-# func_convert_path_noop ARG
-# Copy ARG to func_to_host_path_result.
-func_convert_path_noop ()
-{
- func_to_host_path_result="$1"
-}
-# end func_convert_path_noop
-
-
-# func_convert_path_msys_to_w32 ARG
-# Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic
-# conversion to w32 is not available inside the cwrapper. Returns result in
-# func_to_host_path_result.
-func_convert_path_msys_to_w32 ()
-{
- $opt_debug
- func_to_host_path_result="$1"
- if test -n "$1"; then
- # Remove leading and trailing path separator characters from ARG. MSYS
- # behavior is inconsistent here; cygpath turns them into '.;' and ';.';
- # and winepath ignores them completely.
- func_stripname : : "$1"
- func_to_host_path_tmp1=$func_stripname_result
- func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
- func_to_host_path_result="$func_convert_core_msys_to_w32_result"
- func_convert_path_check : ";" \
- "$func_to_host_path_tmp1" "$func_to_host_path_result"
- func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
- fi
-}
-# end func_convert_path_msys_to_w32
-
-
-# func_convert_path_cygwin_to_w32 ARG
-# Convert path ARG from Cygwin to w32 format. Returns result in
-# func_to_host_file_result.
-func_convert_path_cygwin_to_w32 ()
-{
- $opt_debug
- func_to_host_path_result="$1"
- if test -n "$1"; then
- # See func_convert_path_msys_to_w32:
- func_stripname : : "$1"
- func_to_host_path_tmp1=$func_stripname_result
- func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"`
- func_convert_path_check : ";" \
- "$func_to_host_path_tmp1" "$func_to_host_path_result"
- func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
- fi
-}
-# end func_convert_path_cygwin_to_w32
-
-
-# func_convert_path_nix_to_w32 ARG
-# Convert path ARG from *nix to w32 format. Requires a wine environment and
-# a working winepath. Returns result in func_to_host_file_result.
-func_convert_path_nix_to_w32 ()
-{
- $opt_debug
- func_to_host_path_result="$1"
- if test -n "$1"; then
- # See func_convert_path_msys_to_w32:
- func_stripname : : "$1"
- func_to_host_path_tmp1=$func_stripname_result
- func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
- func_to_host_path_result="$func_convert_core_path_wine_to_w32_result"
- func_convert_path_check : ";" \
- "$func_to_host_path_tmp1" "$func_to_host_path_result"
- func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
- fi
-}
-# end func_convert_path_nix_to_w32
-
-
-# func_convert_path_msys_to_cygwin ARG
-# Convert path ARG from MSYS to Cygwin format. Requires LT_CYGPATH set.
-# Returns result in func_to_host_file_result.
-func_convert_path_msys_to_cygwin ()
-{
- $opt_debug
- func_to_host_path_result="$1"
- if test -n "$1"; then
- # See func_convert_path_msys_to_w32:
- func_stripname : : "$1"
- func_to_host_path_tmp1=$func_stripname_result
- func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
- func_cygpath -u -p "$func_convert_core_msys_to_w32_result"
- func_to_host_path_result="$func_cygpath_result"
- func_convert_path_check : : \
- "$func_to_host_path_tmp1" "$func_to_host_path_result"
- func_convert_path_front_back_pathsep ":*" "*:" : "$1"
- fi
-}
-# end func_convert_path_msys_to_cygwin
-
-
-# func_convert_path_nix_to_cygwin ARG
-# Convert path ARG from *nix to Cygwin format. Requires Cygwin installed in a
-# a wine environment, working winepath, and LT_CYGPATH set. Returns result in
-# func_to_host_file_result.
-func_convert_path_nix_to_cygwin ()
-{
- $opt_debug
- func_to_host_path_result="$1"
- if test -n "$1"; then
- # Remove leading and trailing path separator characters from
- # ARG. msys behavior is inconsistent here, cygpath turns them
- # into '.;' and ';.', and winepath ignores them completely.
- func_stripname : : "$1"
- func_to_host_path_tmp1=$func_stripname_result
- func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
- func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result"
- func_to_host_path_result="$func_cygpath_result"
- func_convert_path_check : : \
- "$func_to_host_path_tmp1" "$func_to_host_path_result"
- func_convert_path_front_back_pathsep ":*" "*:" : "$1"
- fi
-}
-# end func_convert_path_nix_to_cygwin
-
-
-# func_mode_compile arg...
-func_mode_compile ()
-{
- $opt_debug
- # Get the compilation command and the source file.
- base_compile=
- srcfile="$nonopt" # always keep a non-empty value in "srcfile"
- suppress_opt=yes
- suppress_output=
- arg_mode=normal
- libobj=
- later=
- pie_flag=
-
- for arg
- do
- case $arg_mode in
- arg )
- # do not "continue". Instead, add this to base_compile
- lastarg="$arg"
- arg_mode=normal
- ;;
-
- target )
- libobj="$arg"
- arg_mode=normal
- continue
- ;;
-
- normal )
- # Accept any command-line options.
- case $arg in
- -o)
- test -n "$libobj" && \
- func_fatal_error "you cannot specify \`-o' more than once"
- arg_mode=target
- continue
- ;;
-
- -pie | -fpie | -fPIE)
- func_append pie_flag " $arg"
- continue
- ;;
-
- -shared | -static | -prefer-pic | -prefer-non-pic)
- func_append later " $arg"
- continue
- ;;
-
- -no-suppress)
- suppress_opt=no
- continue
- ;;
-
- -Xcompiler)
- arg_mode=arg # the next one goes into the "base_compile" arg list
- continue # The current "srcfile" will either be retained or
- ;; # replaced later. I would guess that would be a bug.
-
- -Wc,*)
- func_stripname '-Wc,' '' "$arg"
- args=$func_stripname_result
- lastarg=
- save_ifs="$IFS"; IFS=','
- for arg in $args; do
- IFS="$save_ifs"
- func_append_quoted lastarg "$arg"
- done
- IFS="$save_ifs"
- func_stripname ' ' '' "$lastarg"
- lastarg=$func_stripname_result
-
- # Add the arguments to base_compile.
- func_append base_compile " $lastarg"
- continue
- ;;
-
- *)
- # Accept the current argument as the source file.
- # The previous "srcfile" becomes the current argument.
- #
- lastarg="$srcfile"
- srcfile="$arg"
- ;;
- esac # case $arg
- ;;
- esac # case $arg_mode
-
- # Aesthetically quote the previous argument.
- func_append_quoted base_compile "$lastarg"
- done # for arg
-
- case $arg_mode in
- arg)
- func_fatal_error "you must specify an argument for -Xcompile"
- ;;
- target)
- func_fatal_error "you must specify a target with \`-o'"
- ;;
- *)
- # Get the name of the library object.
- test -z "$libobj" && {
- func_basename "$srcfile"
- libobj="$func_basename_result"
- }
- ;;
- esac
-
- # Recognize several different file suffixes.
- # If the user specifies -o file.o, it is replaced with file.lo
- case $libobj in
- *.[cCFSifmso] | \
- *.ada | *.adb | *.ads | *.asm | \
- *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \
- *.[fF][09]? | *.for | *.java | *.go | *.obj | *.sx | *.cu | *.cup)
- func_xform "$libobj"
- libobj=$func_xform_result
- ;;
- esac
-
- case $libobj in
- *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;;
- *)
- func_fatal_error "cannot determine name of library object from \`$libobj'"
- ;;
- esac
-
- func_infer_tag $base_compile
-
- for arg in $later; do
- case $arg in
- -shared)
- test "$build_libtool_libs" != yes && \
- func_fatal_configuration "can not build a shared library"
- build_old_libs=no
- continue
- ;;
-
- -static)
- build_libtool_libs=no
- build_old_libs=yes
- continue
- ;;
-
- -prefer-pic)
- pic_mode=yes
- continue
- ;;
-
- -prefer-non-pic)
- pic_mode=no
- continue
- ;;
- esac
- done
-
- func_quote_for_eval "$libobj"
- test "X$libobj" != "X$func_quote_for_eval_result" \
- && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \
- && func_warning "libobj name \`$libobj' may not contain shell special characters."
- func_dirname_and_basename "$obj" "/" ""
- objname="$func_basename_result"
- xdir="$func_dirname_result"
- lobj=${xdir}$objdir/$objname
-
- test -z "$base_compile" && \
- func_fatal_help "you must specify a compilation command"
-
- # Delete any leftover library objects.
- if test "$build_old_libs" = yes; then
- removelist="$obj $lobj $libobj ${libobj}T"
- else
- removelist="$lobj $libobj ${libobj}T"
- fi
-
- # On Cygwin there's no "real" PIC flag so we must build both object types
- case $host_os in
- cygwin* | mingw* | pw32* | os2* | cegcc*)
- pic_mode=default
- ;;
- esac
- if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
- # non-PIC code in shared libraries is not supported
- pic_mode=default
- fi
-
- # Calculate the filename of the output object if compiler does
- # not support -o with -c
- if test "$compiler_c_o" = no; then
- output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext}
- lockfile="$output_obj.lock"
- else
- output_obj=
- need_locks=no
- lockfile=
- fi
-
- # Lock this critical section if it is needed
- # We use this script file to make the link, it avoids creating a new file
- if test "$need_locks" = yes; then
- until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
- func_echo "Waiting for $lockfile to be removed"
- sleep 2
- done
- elif test "$need_locks" = warn; then
- if test -f "$lockfile"; then
- $ECHO "\
-*** ERROR, $lockfile exists and contains:
-`cat $lockfile 2>/dev/null`
-
-This indicates that another process is trying to use the same
-temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together. If you
-repeat this compilation, it may succeed, by chance, but you had better
-avoid parallel builds (make -j) in this platform, or get a better
-compiler."
-
- $opt_dry_run || $RM $removelist
- exit $EXIT_FAILURE
- fi
- func_append removelist " $output_obj"
- $ECHO "$srcfile" > "$lockfile"
- fi
-
- $opt_dry_run || $RM $removelist
- func_append removelist " $lockfile"
- trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15
-
- func_to_tool_file "$srcfile" func_convert_file_msys_to_w32
- srcfile=$func_to_tool_file_result
- func_quote_for_eval "$srcfile"
- qsrcfile=$func_quote_for_eval_result
-
- # Only build a PIC object if we are building libtool libraries.
- if test "$build_libtool_libs" = yes; then
- # Without this assignment, base_compile gets emptied.
- fbsd_hideous_sh_bug=$base_compile
-
- if test "$pic_mode" != no; then
- command="$base_compile $qsrcfile $pic_flag"
- else
- # Don't build PIC code
- command="$base_compile $qsrcfile"
- fi
-
- func_mkdir_p "$xdir$objdir"
-
- if test -z "$output_obj"; then
- # Place PIC objects in $objdir
- func_append command " -o $lobj"
- fi
-
- func_show_eval_locale "$command" \
- 'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE'
-
- if test "$need_locks" = warn &&
- test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
- $ECHO "\
-*** ERROR, $lockfile contains:
-`cat $lockfile 2>/dev/null`
-
-but it should contain:
-$srcfile
-
-This indicates that another process is trying to use the same
-temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together. If you
-repeat this compilation, it may succeed, by chance, but you had better
-avoid parallel builds (make -j) in this platform, or get a better
-compiler."
-
- $opt_dry_run || $RM $removelist
- exit $EXIT_FAILURE
- fi
-
- # Just move the object if needed, then go on to compile the next one
- if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
- func_show_eval '$MV "$output_obj" "$lobj"' \
- 'error=$?; $opt_dry_run || $RM $removelist; exit $error'
- fi
-
- # Allow error messages only from the first compilation.
- if test "$suppress_opt" = yes; then
- suppress_output=' >/dev/null 2>&1'
- fi
- fi
-
- # Only build a position-dependent object if we build old libraries.
- if test "$build_old_libs" = yes; then
- if test "$pic_mode" != yes; then
- # Don't build PIC code
- command="$base_compile $qsrcfile$pie_flag"
- else
- command="$base_compile $qsrcfile $pic_flag"
- fi
- if test "$compiler_c_o" = yes; then
- func_append command " -o $obj"
- fi
-
- # Suppress compiler output if we already did a PIC compilation.
- func_append command "$suppress_output"
- func_show_eval_locale "$command" \
- '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
-
- if test "$need_locks" = warn &&
- test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
- $ECHO "\
-*** ERROR, $lockfile contains:
-`cat $lockfile 2>/dev/null`
-
-but it should contain:
-$srcfile
-
-This indicates that another process is trying to use the same
-temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together. If you
-repeat this compilation, it may succeed, by chance, but you had better
-avoid parallel builds (make -j) in this platform, or get a better
-compiler."
-
- $opt_dry_run || $RM $removelist
- exit $EXIT_FAILURE
- fi
-
- # Just move the object if needed
- if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
- func_show_eval '$MV "$output_obj" "$obj"' \
- 'error=$?; $opt_dry_run || $RM $removelist; exit $error'
- fi
- fi
-
- $opt_dry_run || {
- func_write_libtool_object "$libobj" "$objdir/$objname" "$objname"
-
- # Unlock the critical section if it was locked
- if test "$need_locks" != no; then
- removelist=$lockfile
- $RM "$lockfile"
- fi
- }
-
- exit $EXIT_SUCCESS
-}
-
-$opt_help || {
- test "$opt_mode" = compile && func_mode_compile ${1+"$@"}
-}
-
-func_mode_help ()
-{
- # We need to display help for each of the modes.
- case $opt_mode in
- "")
- # Generic help is extracted from the usage comments
- # at the start of this file.
- func_help
- ;;
-
- clean)
- $ECHO \
-"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
-
-Remove files from the build directory.
-
-RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
-to RM.
-
-If FILE is a libtool library, object or program, all the files associated
-with it are deleted. Otherwise, only FILE itself is deleted using RM."
- ;;
-
- compile)
- $ECHO \
-"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
-
-Compile a source file into a libtool library object.
-
-This mode accepts the following additional options:
-
- -o OUTPUT-FILE set the output file name to OUTPUT-FILE
- -no-suppress do not suppress compiler output for multiple passes
- -prefer-pic try to build PIC objects only
- -prefer-non-pic try to build non-PIC objects only
- -shared do not build a \`.o' file suitable for static linking
- -static only build a \`.o' file suitable for static linking
- -Wc,FLAG pass FLAG directly to the compiler
-
-COMPILE-COMMAND is a command to be used in creating a \`standard' object file
-from the given SOURCEFILE.
-
-The output file name is determined by removing the directory component from
-SOURCEFILE, then substituting the C source code suffix \`.c' with the
-library object suffix, \`.lo'."
- ;;
-
- execute)
- $ECHO \
-"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]...
-
-Automatically set library path, then run a program.
-
-This mode accepts the following additional options:
-
- -dlopen FILE add the directory containing FILE to the library path
-
-This mode sets the library path environment variable according to \`-dlopen'
-flags.
-
-If any of the ARGS are libtool executable wrappers, then they are translated
-into their corresponding uninstalled binary, and any of their required library
-directories are added to the library path.
-
-Then, COMMAND is executed, with ARGS as arguments."
- ;;
-
- finish)
- $ECHO \
-"Usage: $progname [OPTION]... --mode=finish [LIBDIR]...
-
-Complete the installation of libtool libraries.
-
-Each LIBDIR is a directory that contains libtool libraries.
-
-The commands that this mode executes may require superuser privileges. Use
-the \`--dry-run' option if you just want to see what would be executed."
- ;;
-
- install)
- $ECHO \
-"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND...
-
-Install executables or libraries.
-
-INSTALL-COMMAND is the installation command. The first component should be
-either the \`install' or \`cp' program.
-
-The following components of INSTALL-COMMAND are treated specially:
-
- -inst-prefix-dir PREFIX-DIR Use PREFIX-DIR as a staging area for installation
-
-The rest of the components are interpreted as arguments to that command (only
-BSD-compatible install options are recognized)."
- ;;
-
- link)
- $ECHO \
-"Usage: $progname [OPTION]... --mode=link LINK-COMMAND...
-
-Link object files or libraries together to form another library, or to
-create an executable program.
-
-LINK-COMMAND is a command using the C compiler that you would use to create
-a program from several object files.
-
-The following components of LINK-COMMAND are treated specially:
-
- -all-static do not do any dynamic linking at all
- -avoid-version do not add a version suffix if possible
- -bindir BINDIR specify path to binaries directory (for systems where
- libraries must be found in the PATH setting at runtime)
- -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime
- -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols
- -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
- -export-symbols SYMFILE
- try to export only the symbols listed in SYMFILE
- -export-symbols-regex REGEX
- try to export only the symbols matching REGEX
- -LLIBDIR search LIBDIR for required installed libraries
- -lNAME OUTPUT-FILE requires the installed library libNAME
- -module build a library that can dlopened
- -no-fast-install disable the fast-install mode
- -no-install link a not-installable executable
- -no-undefined declare that a library does not refer to external symbols
- -o OUTPUT-FILE create OUTPUT-FILE from the specified objects
- -objectlist FILE Use a list of object files found in FILE to specify objects
- -precious-files-regex REGEX
- don't remove output files matching REGEX
- -release RELEASE specify package release information
- -rpath LIBDIR the created library will eventually be installed in LIBDIR
- -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries
- -shared only do dynamic linking of libtool libraries
- -shrext SUFFIX override the standard shared library file extension
- -static do not do any dynamic linking of uninstalled libtool libraries
- -static-libtool-libs
- do not do any dynamic linking of libtool libraries
- -version-info CURRENT[:REVISION[:AGE]]
- specify library version info [each variable defaults to 0]
- -weak LIBNAME declare that the target provides the LIBNAME interface
- -Wc,FLAG
- -Xcompiler FLAG pass linker-specific FLAG directly to the compiler
- -Wl,FLAG
- -Xlinker FLAG pass linker-specific FLAG directly to the linker
- -XCClinker FLAG pass link-specific FLAG to the compiler driver (CC)
-
-All other options (arguments beginning with \`-') are ignored.
-
-Every other argument is treated as a filename. Files ending in \`.la' are
-treated as uninstalled libtool libraries, other files are standard or library
-object files.
-
-If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
-only library objects (\`.lo' files) may be specified, and \`-rpath' is
-required, except when creating a convenience library.
-
-If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
-using \`ar' and \`ranlib', or on Windows using \`lib'.
-
-If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
-is created, otherwise an executable program is created."
- ;;
-
- uninstall)
- $ECHO \
-"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
-
-Remove libraries from an installation directory.
-
-RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
-to RM.
-
-If FILE is a libtool library, all the files associated with it are deleted.
-Otherwise, only FILE itself is deleted using RM."
- ;;
-
- *)
- func_fatal_help "invalid operation mode \`$opt_mode'"
- ;;
- esac
-
- echo
- $ECHO "Try \`$progname --help' for more information about other modes."
-}
-
-# Now that we've collected a possible --mode arg, show help if necessary
-if $opt_help; then
- if test "$opt_help" = :; then
- func_mode_help
- else
- {
- func_help noexit
- for opt_mode in compile link execute install finish uninstall clean; do
- func_mode_help
- done
- } | sed -n '1p; 2,$s/^Usage:/ or: /p'
- {
- func_help noexit
- for opt_mode in compile link execute install finish uninstall clean; do
- echo
- func_mode_help
- done
- } |
- sed '1d
- /^When reporting/,/^Report/{
- H
- d
- }
- $x
- /information about other modes/d
- /more detailed .*MODE/d
- s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/'
- fi
- exit $?
-fi
-
-
-# func_mode_execute arg...
-func_mode_execute ()
-{
- $opt_debug
- # The first argument is the command name.
- cmd="$nonopt"
- test -z "$cmd" && \
- func_fatal_help "you must specify a COMMAND"
-
- # Handle -dlopen flags immediately.
- for file in $opt_dlopen; do
- test -f "$file" \
- || func_fatal_help "\`$file' is not a file"
-
- dir=
- case $file in
- *.la)
- func_resolve_sysroot "$file"
- file=$func_resolve_sysroot_result
-
- # Check to see that this really is a libtool archive.
- func_lalib_unsafe_p "$file" \
- || func_fatal_help "\`$lib' is not a valid libtool archive"
-
- # Read the libtool library.
- dlname=
- library_names=
- func_source "$file"
-
- # Skip this library if it cannot be dlopened.
- if test -z "$dlname"; then
- # Warn if it was a shared library.
- test -n "$library_names" && \
- func_warning "\`$file' was not linked with \`-export-dynamic'"
- continue
- fi
-
- func_dirname "$file" "" "."
- dir="$func_dirname_result"
-
- if test -f "$dir/$objdir/$dlname"; then
- func_append dir "/$objdir"
- else
- if test ! -f "$dir/$dlname"; then
- func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"
- fi
- fi
- ;;
-
- *.lo)
- # Just add the directory containing the .lo file.
- func_dirname "$file" "" "."
- dir="$func_dirname_result"
- ;;
-
- *)
- func_warning "\`-dlopen' is ignored for non-libtool libraries and objects"
- continue
- ;;
- esac
-
- # Get the absolute pathname.
- absdir=`cd "$dir" && pwd`
- test -n "$absdir" && dir="$absdir"
-
- # Now add the directory to shlibpath_var.
- if eval "test -z \"\$$shlibpath_var\""; then
- eval "$shlibpath_var=\"\$dir\""
- else
- eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
- fi
- done
-
- # This variable tells wrapper scripts just to set shlibpath_var
- # rather than running their programs.
- libtool_execute_magic="$magic"
-
- # Check if any of the arguments is a wrapper script.
- args=
- for file
- do
- case $file in
- -* | *.la | *.lo ) ;;
- *)
- # Do a test to see if this is really a libtool program.
- if func_ltwrapper_script_p "$file"; then
- func_source "$file"
- # Transform arg to wrapped name.
- file="$progdir/$program"
- elif func_ltwrapper_executable_p "$file"; then
- func_ltwrapper_scriptname "$file"
- func_source "$func_ltwrapper_scriptname_result"
- # Transform arg to wrapped name.
- file="$progdir/$program"
- fi
- ;;
- esac
- # Quote arguments (to preserve shell metacharacters).
- func_append_quoted args "$file"
- done
-
- if test "X$opt_dry_run" = Xfalse; then
- if test -n "$shlibpath_var"; then
- # Export the shlibpath_var.
- eval "export $shlibpath_var"
- fi
-
- # Restore saved environment variables
- for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
- do
- eval "if test \"\${save_$lt_var+set}\" = set; then
- $lt_var=\$save_$lt_var; export $lt_var
- else
- $lt_unset $lt_var
- fi"
- done
-
- # Now prepare to actually exec the command.
- exec_cmd="\$cmd$args"
- else
- # Display what would be done.
- if test -n "$shlibpath_var"; then
- eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
- echo "export $shlibpath_var"
- fi
- $ECHO "$cmd$args"
- exit $EXIT_SUCCESS
- fi
-}
-
-test "$opt_mode" = execute && func_mode_execute ${1+"$@"}
-
-
-# func_mode_finish arg...
-func_mode_finish ()
-{
- $opt_debug
- libs=
- libdirs=
- admincmds=
-
- for opt in "$nonopt" ${1+"$@"}
- do
- if test -d "$opt"; then
- func_append libdirs " $opt"
-
- elif test -f "$opt"; then
- if func_lalib_unsafe_p "$opt"; then
- func_append libs " $opt"
- else
- func_warning "\`$opt' is not a valid libtool archive"
- fi
-
- else
- func_fatal_error "invalid argument \`$opt'"
- fi
- done
-
- if test -n "$libs"; then
- if test -n "$lt_sysroot"; then
- sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"`
- sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;"
- else
- sysroot_cmd=
- fi
-
- # Remove sysroot references
- if $opt_dry_run; then
- for lib in $libs; do
- echo "removing references to $lt_sysroot and \`=' prefixes from $lib"
- done
- else
- tmpdir=`func_mktempdir`
- for lib in $libs; do
- sed -e "${sysroot_cmd} s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \
- > $tmpdir/tmp-la
- mv -f $tmpdir/tmp-la $lib
- done
- ${RM}r "$tmpdir"
- fi
- fi
-
- if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
- for libdir in $libdirs; do
- if test -n "$finish_cmds"; then
- # Do each command in the finish commands.
- func_execute_cmds "$finish_cmds" 'admincmds="$admincmds
-'"$cmd"'"'
- fi
- if test -n "$finish_eval"; then
- # Do the single finish_eval.
- eval cmds=\"$finish_eval\"
- $opt_dry_run || eval "$cmds" || func_append admincmds "
- $cmds"
- fi
- done
- fi
-
- # Exit here if they wanted silent mode.
- $opt_silent && exit $EXIT_SUCCESS
-
- if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
- echo "----------------------------------------------------------------------"
- echo "Libraries have been installed in:"
- for libdir in $libdirs; do
- $ECHO " $libdir"
- done
- echo
- echo "If you ever happen to want to link against installed libraries"
- echo "in a given directory, LIBDIR, you must either use libtool, and"
- echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
- echo "flag during linking and do at least one of the following:"
- if test -n "$shlibpath_var"; then
- echo " - add LIBDIR to the \`$shlibpath_var' environment variable"
- echo " during execution"
- fi
- if test -n "$runpath_var"; then
- echo " - add LIBDIR to the \`$runpath_var' environment variable"
- echo " during linking"
- fi
- if test -n "$hardcode_libdir_flag_spec"; then
- libdir=LIBDIR
- eval flag=\"$hardcode_libdir_flag_spec\"
-
- $ECHO " - use the \`$flag' linker flag"
- fi
- if test -n "$admincmds"; then
- $ECHO " - have your system administrator run these commands:$admincmds"
- fi
- if test -f /etc/ld.so.conf; then
- echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
- fi
- echo
-
- echo "See any operating system documentation about shared libraries for"
- case $host in
- solaris2.[6789]|solaris2.1[0-9])
- echo "more information, such as the ld(1), crle(1) and ld.so(8) manual"
- echo "pages."
- ;;
- *)
- echo "more information, such as the ld(1) and ld.so(8) manual pages."
- ;;
- esac
- echo "----------------------------------------------------------------------"
- fi
- exit $EXIT_SUCCESS
-}
-
-test "$opt_mode" = finish && func_mode_finish ${1+"$@"}
-
-
-# func_mode_install arg...
-func_mode_install ()
-{
- $opt_debug
- # There may be an optional sh(1) argument at the beginning of
- # install_prog (especially on Windows NT).
- if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
- # Allow the use of GNU shtool's install command.
- case $nonopt in *shtool*) :;; *) false;; esac; then
- # Aesthetically quote it.
- func_quote_for_eval "$nonopt"
- install_prog="$func_quote_for_eval_result "
- arg=$1
- shift
- else
- install_prog=
- arg=$nonopt
- fi
-
- # The real first argument should be the name of the installation program.
- # Aesthetically quote it.
- func_quote_for_eval "$arg"
- func_append install_prog "$func_quote_for_eval_result"
- install_shared_prog=$install_prog
- case " $install_prog " in
- *[\\\ /]cp\ *) install_cp=: ;;
- *) install_cp=false ;;
- esac
-
- # We need to accept at least all the BSD install flags.
- dest=
- files=
- opts=
- prev=
- install_type=
- isdir=no
- stripme=
- no_mode=:
- for arg
- do
- arg2=
- if test -n "$dest"; then
- func_append files " $dest"
- dest=$arg
- continue
- fi
-
- case $arg in
- -d) isdir=yes ;;
- -f)
- if $install_cp; then :; else
- prev=$arg
- fi
- ;;
- -g | -m | -o)
- prev=$arg
- ;;
- -s)
- stripme=" -s"
- continue
- ;;
- -*)
- ;;
- *)
- # If the previous option needed an argument, then skip it.
- if test -n "$prev"; then
- if test "x$prev" = x-m && test -n "$install_override_mode"; then
- arg2=$install_override_mode
- no_mode=false
- fi
- prev=
- else
- dest=$arg
- continue
- fi
- ;;
- esac
-
- # Aesthetically quote the argument.
- func_quote_for_eval "$arg"
- func_append install_prog " $func_quote_for_eval_result"
- if test -n "$arg2"; then
- func_quote_for_eval "$arg2"
- fi
- func_append install_shared_prog " $func_quote_for_eval_result"
- done
-
- test -z "$install_prog" && \
- func_fatal_help "you must specify an install program"
-
- test -n "$prev" && \
- func_fatal_help "the \`$prev' option requires an argument"
-
- if test -n "$install_override_mode" && $no_mode; then
- if $install_cp; then :; else
- func_quote_for_eval "$install_override_mode"
- func_append install_shared_prog " -m $func_quote_for_eval_result"
- fi
- fi
-
- if test -z "$files"; then
- if test -z "$dest"; then
- func_fatal_help "no file or destination specified"
- else
- func_fatal_help "you must specify a destination"
- fi
- fi
-
- # Strip any trailing slash from the destination.
- func_stripname '' '/' "$dest"
- dest=$func_stripname_result
-
- # Check to see that the destination is a directory.
- test -d "$dest" && isdir=yes
- if test "$isdir" = yes; then
- destdir="$dest"
- destname=
- else
- func_dirname_and_basename "$dest" "" "."
- destdir="$func_dirname_result"
- destname="$func_basename_result"
-
- # Not a directory, so check to see that there is only one file specified.
- set dummy $files; shift
- test "$#" -gt 1 && \
- func_fatal_help "\`$dest' is not a directory"
- fi
- case $destdir in
- [\\/]* | [A-Za-z]:[\\/]*) ;;
- *)
- for file in $files; do
- case $file in
- *.lo) ;;
- *)
- func_fatal_help "\`$destdir' must be an absolute directory name"
- ;;
- esac
- done
- ;;
- esac
-
- # This variable tells wrapper scripts just to set variables rather
- # than running their programs.
- libtool_install_magic="$magic"
-
- staticlibs=
- future_libdirs=
- current_libdirs=
- for file in $files; do
-
- # Do each installation.
- case $file in
- *.$libext)
- # Do the static libraries later.
- func_append staticlibs " $file"
- ;;
-
- *.la)
- func_resolve_sysroot "$file"
- file=$func_resolve_sysroot_result
-
- # Check to see that this really is a libtool archive.
- func_lalib_unsafe_p "$file" \
- || func_fatal_help "\`$file' is not a valid libtool archive"
-
- library_names=
- old_library=
- relink_command=
- func_source "$file"
-
- # Add the libdir to current_libdirs if it is the destination.
- if test "X$destdir" = "X$libdir"; then
- case "$current_libdirs " in
- *" $libdir "*) ;;
- *) func_append current_libdirs " $libdir" ;;
- esac
- else
- # Note the libdir as a future libdir.
- case "$future_libdirs " in
- *" $libdir "*) ;;
- *) func_append future_libdirs " $libdir" ;;
- esac
- fi
-
- func_dirname "$file" "/" ""
- dir="$func_dirname_result"
- func_append dir "$objdir"
-
- if test -n "$relink_command"; then
- # Determine the prefix the user has applied to our future dir.
- inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"`
-
- # Don't allow the user to place us outside of our expected
- # location b/c this prevents finding dependent libraries that
- # are installed to the same prefix.
- # At present, this check doesn't affect windows .dll's that
- # are installed into $libdir/../bin (currently, that works fine)
- # but it's something to keep an eye on.
- test "$inst_prefix_dir" = "$destdir" && \
- func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir"
-
- if test -n "$inst_prefix_dir"; then
- # Stick the inst_prefix_dir data into the link command.
- relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
- else
- relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
- fi
-
- func_warning "relinking \`$file'"
- func_show_eval "$relink_command" \
- 'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"'
- fi
-
- # See the names of the shared library.
- set dummy $library_names; shift
- if test -n "$1"; then
- realname="$1"
- shift
-
- srcname="$realname"
- test -n "$relink_command" && srcname="$realname"T
-
- # Install the shared library and build the symlinks.
- func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \
- 'exit $?'
- tstripme="$stripme"
- case $host_os in
- cygwin* | mingw* | pw32* | cegcc*)
- case $realname in
- *.dll.a)
- tstripme=""
- ;;
- esac
- ;;
- esac
- if test -n "$tstripme" && test -n "$striplib"; then
- func_show_eval "$striplib $destdir/$realname" 'exit $?'
- fi
-
- if test "$#" -gt 0; then
- # Delete the old symlinks, and create new ones.
- # Try `ln -sf' first, because the `ln' binary might depend on
- # the symlink we replace! Solaris /bin/ln does not understand -f,
- # so we also need to try rm && ln -s.
- for linkname
- do
- test "$linkname" != "$realname" \
- && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })"
- done
- fi
-
- # Do each command in the postinstall commands.
- lib="$destdir/$realname"
- func_execute_cmds "$postinstall_cmds" 'exit $?'
- fi
-
- # Install the pseudo-library for information purposes.
- func_basename "$file"
- name="$func_basename_result"
- instname="$dir/$name"i
- func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
-
- # Maybe install the static library, too.
- test -n "$old_library" && func_append staticlibs " $dir/$old_library"
- ;;
-
- *.lo)
- # Install (i.e. copy) a libtool object.
-
- # Figure out destination file name, if it wasn't already specified.
- if test -n "$destname"; then
- destfile="$destdir/$destname"
- else
- func_basename "$file"
- destfile="$func_basename_result"
- destfile="$destdir/$destfile"
- fi
-
- # Deduce the name of the destination old-style object file.
- case $destfile in
- *.lo)
- func_lo2o "$destfile"
- staticdest=$func_lo2o_result
- ;;
- *.$objext)
- staticdest="$destfile"
- destfile=
- ;;
- *)
- func_fatal_help "cannot copy a libtool object to \`$destfile'"
- ;;
- esac
-
- # Install the libtool object if requested.
- test -n "$destfile" && \
- func_show_eval "$install_prog $file $destfile" 'exit $?'
-
- # Install the old object if enabled.
- if test "$build_old_libs" = yes; then
- # Deduce the name of the old-style object file.
- func_lo2o "$file"
- staticobj=$func_lo2o_result
- func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?'
- fi
- exit $EXIT_SUCCESS
- ;;
-
- *)
- # Figure out destination file name, if it wasn't already specified.
- if test -n "$destname"; then
- destfile="$destdir/$destname"
- else
- func_basename "$file"
- destfile="$func_basename_result"
- destfile="$destdir/$destfile"
- fi
-
- # If the file is missing, and there is a .exe on the end, strip it
- # because it is most likely a libtool script we actually want to
- # install
- stripped_ext=""
- case $file in
- *.exe)
- if test ! -f "$file"; then
- func_stripname '' '.exe' "$file"
- file=$func_stripname_result
- stripped_ext=".exe"
- fi
- ;;
- esac
-
- # Do a test to see if this is really a libtool program.
- case $host in
- *cygwin* | *mingw*)
- if func_ltwrapper_executable_p "$file"; then
- func_ltwrapper_scriptname "$file"
- wrapper=$func_ltwrapper_scriptname_result
- else
- func_stripname '' '.exe' "$file"
- wrapper=$func_stripname_result
- fi
- ;;
- *)
- wrapper=$file
- ;;
- esac
- if func_ltwrapper_script_p "$wrapper"; then
- notinst_deplibs=
- relink_command=
-
- func_source "$wrapper"
-
- # Check the variables that should have been set.
- test -z "$generated_by_libtool_version" && \
- func_fatal_error "invalid libtool wrapper script \`$wrapper'"
-
- finalize=yes
- for lib in $notinst_deplibs; do
- # Check to see that each library is installed.
- libdir=
- if test -f "$lib"; then
- func_source "$lib"
- fi
- libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test
- if test -n "$libdir" && test ! -f "$libfile"; then
- func_warning "\`$lib' has not been installed in \`$libdir'"
- finalize=no
- fi
- done
-
- relink_command=
- func_source "$wrapper"
-
- outputname=
- if test "$fast_install" = no && test -n "$relink_command"; then
- $opt_dry_run || {
- if test "$finalize" = yes; then
- tmpdir=`func_mktempdir`
- func_basename "$file$stripped_ext"
- file="$func_basename_result"
- outputname="$tmpdir/$file"
- # Replace the output file specification.
- relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'`
-
- $opt_silent || {
- func_quote_for_expand "$relink_command"
- eval "func_echo $func_quote_for_expand_result"
- }
- if eval "$relink_command"; then :
- else
- func_error "error: relink \`$file' with the above command before installing it"
- $opt_dry_run || ${RM}r "$tmpdir"
- continue
- fi
- file="$outputname"
- else
- func_warning "cannot relink \`$file'"
- fi
- }
- else
- # Install the binary that we compiled earlier.
- file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"`
- fi
- fi
-
- # remove .exe since cygwin /usr/bin/install will append another
- # one anyway
- case $install_prog,$host in
- */usr/bin/install*,*cygwin*)
- case $file:$destfile in
- *.exe:*.exe)
- # this is ok
- ;;
- *.exe:*)
- destfile=$destfile.exe
- ;;
- *:*.exe)
- func_stripname '' '.exe' "$destfile"
- destfile=$func_stripname_result
- ;;
- esac
- ;;
- esac
- func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?'
- $opt_dry_run || if test -n "$outputname"; then
- ${RM}r "$tmpdir"
- fi
- ;;
- esac
- done
-
- for file in $staticlibs; do
- func_basename "$file"
- name="$func_basename_result"
-
- # Set up the ranlib parameters.
- oldlib="$destdir/$name"
- func_to_tool_file "$oldlib" func_convert_file_msys_to_w32
- tool_oldlib=$func_to_tool_file_result
-
- func_show_eval "$install_prog \$file \$oldlib" 'exit $?'
-
- if test -n "$stripme" && test -n "$old_striplib"; then
- func_show_eval "$old_striplib $tool_oldlib" 'exit $?'
- fi
-
- # Do each command in the postinstall commands.
- func_execute_cmds "$old_postinstall_cmds" 'exit $?'
- done
-
- test -n "$future_libdirs" && \
- func_warning "remember to run \`$progname --finish$future_libdirs'"
-
- if test -n "$current_libdirs"; then
- # Maybe just do a dry run.
- $opt_dry_run && current_libdirs=" -n$current_libdirs"
- exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
- else
- exit $EXIT_SUCCESS
- fi
-}
-
-test "$opt_mode" = install && func_mode_install ${1+"$@"}
-
-
-# func_generate_dlsyms outputname originator pic_p
-# Extract symbols from dlprefiles and create ${outputname}S.o with
-# a dlpreopen symbol table.
-func_generate_dlsyms ()
-{
- $opt_debug
- my_outputname="$1"
- my_originator="$2"
- my_pic_p="${3-no}"
- my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'`
- my_dlsyms=
-
- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
- if test -n "$NM" && test -n "$global_symbol_pipe"; then
- my_dlsyms="${my_outputname}S.c"
- else
- func_error "not configured to extract global symbols from dlpreopened files"
- fi
- fi
-
- if test -n "$my_dlsyms"; then
- case $my_dlsyms in
- "") ;;
- *.c)
- # Discover the nlist of each of the dlfiles.
- nlist="$output_objdir/${my_outputname}.nm"
-
- func_show_eval "$RM $nlist ${nlist}S ${nlist}T"
-
- # Parse the name list into a source file.
- func_verbose "creating $output_objdir/$my_dlsyms"
-
- $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
-/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */
-/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */
-
-#ifdef __cplusplus
-extern \"C\" {
-#endif
-
-#if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4))
-#pragma GCC diagnostic ignored \"-Wstrict-prototypes\"
-#endif
-
-/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
-#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
-/* DATA imports from DLLs on WIN32 con't be const, because runtime
- relocations are performed -- see ld's documentation on pseudo-relocs. */
-# define LT_DLSYM_CONST
-#elif defined(__osf__)
-/* This system does not cope well with relocations in const data. */
-# define LT_DLSYM_CONST
-#else
-# define LT_DLSYM_CONST const
-#endif
-
-/* External symbol declarations for the compiler. */\
-"
-
- if test "$dlself" = yes; then
- func_verbose "generating symbol list for \`$output'"
-
- $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
-
- # Add our own program objects to the symbol list.
- progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP`
- for progfile in $progfiles; do
- func_to_tool_file "$progfile" func_convert_file_msys_to_w32
- func_verbose "extracting global C symbols from \`$func_to_tool_file_result'"
- $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'"
- done
-
- if test -n "$exclude_expsyms"; then
- $opt_dry_run || {
- eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
- eval '$MV "$nlist"T "$nlist"'
- }
- fi
-
- if test -n "$export_symbols_regex"; then
- $opt_dry_run || {
- eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
- eval '$MV "$nlist"T "$nlist"'
- }
- fi
-
- # Prepare the list of exported symbols
- if test -z "$export_symbols"; then
- export_symbols="$output_objdir/$outputname.exp"
- $opt_dry_run || {
- $RM $export_symbols
- eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
- case $host in
- *cygwin* | *mingw* | *cegcc* )
- eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
- eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
- ;;
- esac
- }
- else
- $opt_dry_run || {
- eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
- eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
- eval '$MV "$nlist"T "$nlist"'
- case $host in
- *cygwin* | *mingw* | *cegcc* )
- eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
- eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
- ;;
- esac
- }
- fi
- fi
-
- for dlprefile in $dlprefiles; do
- func_verbose "extracting global C symbols from \`$dlprefile'"
- func_basename "$dlprefile"
- name="$func_basename_result"
- case $host in
- *cygwin* | *mingw* | *cegcc* )
- # if an import library, we need to obtain dlname
- if func_win32_import_lib_p "$dlprefile"; then
- func_tr_sh "$dlprefile"
- eval "curr_lafile=\$libfile_$func_tr_sh_result"
- dlprefile_dlbasename=""
- if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then
- # Use subshell, to avoid clobbering current variable values
- dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"`
- if test -n "$dlprefile_dlname" ; then
- func_basename "$dlprefile_dlname"
- dlprefile_dlbasename="$func_basename_result"
- else
- # no lafile. user explicitly requested -dlpreopen <import library>.
- $sharedlib_from_linklib_cmd "$dlprefile"
- dlprefile_dlbasename=$sharedlib_from_linklib_result
- fi
- fi
- $opt_dry_run || {
- if test -n "$dlprefile_dlbasename" ; then
- eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"'
- else
- func_warning "Could not compute DLL name from $name"
- eval '$ECHO ": $name " >> "$nlist"'
- fi
- func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
- eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe |
- $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'"
- }
- else # not an import lib
- $opt_dry_run || {
- eval '$ECHO ": $name " >> "$nlist"'
- func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
- eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
- }
- fi
- ;;
- *)
- $opt_dry_run || {
- eval '$ECHO ": $name " >> "$nlist"'
- func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
- eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
- }
- ;;
- esac
- done
-
- $opt_dry_run || {
- # Make sure we have at least an empty file.
- test -f "$nlist" || : > "$nlist"
-
- if test -n "$exclude_expsyms"; then
- $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
- $MV "$nlist"T "$nlist"
- fi
-
- # Try sorting and uniquifying the output.
- if $GREP -v "^: " < "$nlist" |
- if sort -k 3 </dev/null >/dev/null 2>&1; then
- sort -k 3
- else
- sort +2
- fi |
- uniq > "$nlist"S; then
- :
- else
- $GREP -v "^: " < "$nlist" > "$nlist"S
- fi
-
- if test -f "$nlist"S; then
- eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'
- else
- echo '/* NONE */' >> "$output_objdir/$my_dlsyms"
- fi
-
- echo >> "$output_objdir/$my_dlsyms" "\
-
-/* The mapping between symbol names and symbols. */
-typedef struct {
- const char *name;
- void *address;
-} lt_dlsymlist;
-extern LT_DLSYM_CONST lt_dlsymlist
-lt_${my_prefix}_LTX_preloaded_symbols[];
-LT_DLSYM_CONST lt_dlsymlist
-lt_${my_prefix}_LTX_preloaded_symbols[] =
-{\
- { \"$my_originator\", (void *) 0 },"
-
- case $need_lib_prefix in
- no)
- eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms"
- ;;
- *)
- eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms"
- ;;
- esac
- echo >> "$output_objdir/$my_dlsyms" "\
- {0, (void *) 0}
-};
-
-/* This works around a problem in FreeBSD linker */
-#ifdef FREEBSD_WORKAROUND
-static const void *lt_preloaded_setup() {
- return lt_${my_prefix}_LTX_preloaded_symbols;
-}
-#endif
-
-#ifdef __cplusplus
-}
-#endif\
-"
- } # !$opt_dry_run
-
- pic_flag_for_symtable=
- case "$compile_command " in
- *" -static "*) ;;
- *)
- case $host in
- # compiling the symbol table file with pic_flag works around
- # a FreeBSD bug that causes programs to crash when -lm is
- # linked before any other PIC object. But we must not use
- # pic_flag when linking with -static. The problem exists in
- # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
- *-*-freebsd2.*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
- pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;;
- *-*-hpux*)
- pic_flag_for_symtable=" $pic_flag" ;;
- *)
- if test "X$my_pic_p" != Xno; then
- pic_flag_for_symtable=" $pic_flag"
- fi
- ;;
- esac
- ;;
- esac
- symtab_cflags=
- for arg in $LTCFLAGS; do
- case $arg in
- -pie | -fpie | -fPIE) ;;
- *) func_append symtab_cflags " $arg" ;;
- esac
- done
-
- # Now compile the dynamic symbol file.
- func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'
-
- # Clean up the generated files.
- func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"'
-
- # Transform the symbol file into the correct name.
- symfileobj="$output_objdir/${my_outputname}S.$objext"
- case $host in
- *cygwin* | *mingw* | *cegcc* )
- if test -f "$output_objdir/$my_outputname.def"; then
- compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
- finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
- else
- compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
- finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
- fi
- ;;
- *)
- compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
- finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
- ;;
- esac
- ;;
- *)
- func_fatal_error "unknown suffix for \`$my_dlsyms'"
- ;;
- esac
- else
- # We keep going just in case the user didn't refer to
- # lt_preloaded_symbols. The linker will fail if global_symbol_pipe
- # really was required.
-
- # Nullify the symbol file.
- compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"`
- finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"`
- fi
-}
-
-# func_win32_libid arg
-# return the library type of file 'arg'
-#
-# Need a lot of goo to handle *both* DLLs and import libs
-# Has to be a shell function in order to 'eat' the argument
-# that is supplied when $file_magic_command is called.
-# Despite the name, also deal with 64 bit binaries.
-func_win32_libid ()
-{
- $opt_debug
- win32_libid_type="unknown"
- win32_fileres=`file -L $1 2>/dev/null`
- case $win32_fileres in
- *ar\ archive\ import\ library*) # definitely import
- win32_libid_type="x86 archive import"
- ;;
- *ar\ archive*) # could be an import, or static
- # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD.
- if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
- $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then
- func_to_tool_file "$1" func_convert_file_msys_to_w32
- win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" |
- $SED -n -e '
- 1,100{
- / I /{
- s,.*,import,
- p
- q
- }
- }'`
- case $win32_nmres in
- import*) win32_libid_type="x86 archive import";;
- *) win32_libid_type="x86 archive static";;
- esac
- fi
- ;;
- *DLL*)
- win32_libid_type="x86 DLL"
- ;;
- *executable*) # but shell scripts are "executable" too...
- case $win32_fileres in
- *MS\ Windows\ PE\ Intel*)
- win32_libid_type="x86 DLL"
- ;;
- esac
- ;;
- esac
- $ECHO "$win32_libid_type"
-}
-
-# func_cygming_dll_for_implib ARG
-#
-# Platform-specific function to extract the
-# name of the DLL associated with the specified
-# import library ARG.
-# Invoked by eval'ing the libtool variable
-# $sharedlib_from_linklib_cmd
-# Result is available in the variable
-# $sharedlib_from_linklib_result
-func_cygming_dll_for_implib ()
-{
- $opt_debug
- sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"`
-}
-
-# func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs
-#
-# The is the core of a fallback implementation of a
-# platform-specific function to extract the name of the
-# DLL associated with the specified import library LIBNAME.
-#
-# SECTION_NAME is either .idata$6 or .idata$7, depending
-# on the platform and compiler that created the implib.
-#
-# Echos the name of the DLL associated with the
-# specified import library.
-func_cygming_dll_for_implib_fallback_core ()
-{
- $opt_debug
- match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"`
- $OBJDUMP -s --section "$1" "$2" 2>/dev/null |
- $SED '/^Contents of section '"$match_literal"':/{
- # Place marker at beginning of archive member dllname section
- s/.*/====MARK====/
- p
- d
- }
- # These lines can sometimes be longer than 43 characters, but
- # are always uninteresting
- /:[ ]*file format pe[i]\{,1\}-/d
- /^In archive [^:]*:/d
- # Ensure marker is printed
- /^====MARK====/p
- # Remove all lines with less than 43 characters
- /^.\{43\}/!d
- # From remaining lines, remove first 43 characters
- s/^.\{43\}//' |
- $SED -n '
- # Join marker and all lines until next marker into a single line
- /^====MARK====/ b para
- H
- $ b para
- b
- :para
- x
- s/\n//g
- # Remove the marker
- s/^====MARK====//
- # Remove trailing dots and whitespace
- s/[\. \t]*$//
- # Print
- /./p' |
- # we now have a list, one entry per line, of the stringified
- # contents of the appropriate section of all members of the
- # archive which possess that section. Heuristic: eliminate
- # all those which have a first or second character that is
- # a '.' (that is, objdump's representation of an unprintable
- # character.) This should work for all archives with less than
- # 0x302f exports -- but will fail for DLLs whose name actually
- # begins with a literal '.' or a single character followed by
- # a '.'.
- #
- # Of those that remain, print the first one.
- $SED -e '/^\./d;/^.\./d;q'
-}
-
-# func_cygming_gnu_implib_p ARG
-# This predicate returns with zero status (TRUE) if
-# ARG is a GNU/binutils-style import library. Returns
-# with nonzero status (FALSE) otherwise.
-func_cygming_gnu_implib_p ()
-{
- $opt_debug
- func_to_tool_file "$1" func_convert_file_msys_to_w32
- func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'`
- test -n "$func_cygming_gnu_implib_tmp"
-}
-
-# func_cygming_ms_implib_p ARG
-# This predicate returns with zero status (TRUE) if
-# ARG is an MS-style import library. Returns
-# with nonzero status (FALSE) otherwise.
-func_cygming_ms_implib_p ()
-{
- $opt_debug
- func_to_tool_file "$1" func_convert_file_msys_to_w32
- func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'`
- test -n "$func_cygming_ms_implib_tmp"
-}
-
-# func_cygming_dll_for_implib_fallback ARG
-# Platform-specific function to extract the
-# name of the DLL associated with the specified
-# import library ARG.
-#
-# This fallback implementation is for use when $DLLTOOL
-# does not support the --identify-strict option.
-# Invoked by eval'ing the libtool variable
-# $sharedlib_from_linklib_cmd
-# Result is available in the variable
-# $sharedlib_from_linklib_result
-func_cygming_dll_for_implib_fallback ()
-{
- $opt_debug
- if func_cygming_gnu_implib_p "$1" ; then
- # binutils import library
- sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"`
- elif func_cygming_ms_implib_p "$1" ; then
- # ms-generated import library
- sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"`
- else
- # unknown
- sharedlib_from_linklib_result=""
- fi
-}
-
-
-# func_extract_an_archive dir oldlib
-func_extract_an_archive ()
-{
- $opt_debug
- f_ex_an_ar_dir="$1"; shift
- f_ex_an_ar_oldlib="$1"
- if test "$lock_old_archive_extraction" = yes; then
- lockfile=$f_ex_an_ar_oldlib.lock
- until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
- func_echo "Waiting for $lockfile to be removed"
- sleep 2
- done
- fi
- func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \
- 'stat=$?; rm -f "$lockfile"; exit $stat'
- if test "$lock_old_archive_extraction" = yes; then
- $opt_dry_run || rm -f "$lockfile"
- fi
- if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
- :
- else
- func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib"
- fi
-}
-
-
-# func_extract_archives gentop oldlib ...
-func_extract_archives ()
-{
- $opt_debug
- my_gentop="$1"; shift
- my_oldlibs=${1+"$@"}
- my_oldobjs=""
- my_xlib=""
- my_xabs=""
- my_xdir=""
-
- for my_xlib in $my_oldlibs; do
- # Extract the objects.
- case $my_xlib in
- [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
- *) my_xabs=`pwd`"/$my_xlib" ;;
- esac
- func_basename "$my_xlib"
- my_xlib="$func_basename_result"
- my_xlib_u=$my_xlib
- while :; do
- case " $extracted_archives " in
- *" $my_xlib_u "*)
- func_arith $extracted_serial + 1
- extracted_serial=$func_arith_result
- my_xlib_u=lt$extracted_serial-$my_xlib ;;
- *) break ;;
- esac
- done
- extracted_archives="$extracted_archives $my_xlib_u"
- my_xdir="$my_gentop/$my_xlib_u"
-
- func_mkdir_p "$my_xdir"
-
- case $host in
- *-darwin*)
- func_verbose "Extracting $my_xabs"
- # Do not bother doing anything if just a dry run
- $opt_dry_run || {
- darwin_orig_dir=`pwd`
- cd $my_xdir || exit $?
- darwin_archive=$my_xabs
- darwin_curdir=`pwd`
- darwin_base_archive=`basename "$darwin_archive"`
- darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`
- if test -n "$darwin_arches"; then
- darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
- darwin_arch=
- func_verbose "$darwin_base_archive has multiple architectures $darwin_arches"
- for darwin_arch in $darwin_arches ; do
- func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
- $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
- cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
- func_extract_an_archive "`pwd`" "${darwin_base_archive}"
- cd "$darwin_curdir"
- $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
- done # $darwin_arches
- ## Okay now we've a bunch of thin objects, gotta fatten them up :)
- darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u`
- darwin_file=
- darwin_files=
- for darwin_file in $darwin_filelist; do
- darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP`
- $LIPO -create -output "$darwin_file" $darwin_files
- done # $darwin_filelist
- $RM -rf unfat-$$
- cd "$darwin_orig_dir"
- else
- cd $darwin_orig_dir
- func_extract_an_archive "$my_xdir" "$my_xabs"
- fi # $darwin_arches
- } # !$opt_dry_run
- ;;
- *)
- func_extract_an_archive "$my_xdir" "$my_xabs"
- ;;
- esac
- my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP`
- done
-
- func_extract_archives_result="$my_oldobjs"
-}
-
-
-# func_emit_wrapper [arg=no]
-#
-# Emit a libtool wrapper script on stdout.
-# Don't directly open a file because we may want to
-# incorporate the script contents within a cygwin/mingw
-# wrapper executable. Must ONLY be called from within
-# func_mode_link because it depends on a number of variables
-# set therein.
-#
-# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
-# variable will take. If 'yes', then the emitted script
-# will assume that the directory in which it is stored is
-# the $objdir directory. This is a cygwin/mingw-specific
-# behavior.
-func_emit_wrapper ()
-{
- func_emit_wrapper_arg1=${1-no}
-
- $ECHO "\
-#! $SHELL
-
-# $output - temporary wrapper script for $objdir/$outputname
-# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
-#
-# The $output program cannot be directly executed until all the libtool
-# libraries that it depends on are installed.
-#
-# This wrapper script should never be moved out of the build directory.
-# If it is, it will not operate correctly.
-
-# Sed substitution that helps us do robust quoting. It backslashifies
-# metacharacters that are still active within double-quoted strings.
-sed_quote_subst='$sed_quote_subst'
-
-# Be Bourne compatible
-if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
- emulate sh
- NULLCMD=:
- # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '\${1+\"\$@\"}'='\"\$@\"'
- setopt NO_GLOB_SUBST
-else
- case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
-fi
-BIN_SH=xpg4; export BIN_SH # for Tru64
-DUALCASE=1; export DUALCASE # for MKS sh
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-relink_command=\"$relink_command\"
-
-# This environment variable determines our operation mode.
-if test \"\$libtool_install_magic\" = \"$magic\"; then
- # install mode needs the following variables:
- generated_by_libtool_version='$macro_version'
- notinst_deplibs='$notinst_deplibs'
-else
- # When we are sourced in execute mode, \$file and \$ECHO are already set.
- if test \"\$libtool_execute_magic\" != \"$magic\"; then
- file=\"\$0\""
-
- qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"`
- $ECHO "\
-
-# A function that is used when there is no print builtin or printf.
-func_fallback_echo ()
-{
- eval 'cat <<_LTECHO_EOF
-\$1
-_LTECHO_EOF'
-}
- ECHO=\"$qECHO\"
- fi
-
-# Very basic option parsing. These options are (a) specific to
-# the libtool wrapper, (b) are identical between the wrapper
-# /script/ and the wrapper /executable/ which is used only on
-# windows platforms, and (c) all begin with the string "--lt-"
-# (application programs are unlikely to have options which match
-# this pattern).
-#
-# There are only two supported options: --lt-debug and
-# --lt-dump-script. There is, deliberately, no --lt-help.
-#
-# The first argument to this parsing function should be the
-# script's $0 value, followed by "$@".
-lt_option_debug=
-func_parse_lt_options ()
-{
- lt_script_arg0=\$0
- shift
- for lt_opt
- do
- case \"\$lt_opt\" in
- --lt-debug) lt_option_debug=1 ;;
- --lt-dump-script)
- lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\`
- test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=.
- lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\`
- cat \"\$lt_dump_D/\$lt_dump_F\"
- exit 0
- ;;
- --lt-*)
- \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2
- exit 1
- ;;
- esac
- done
-
- # Print the debug banner immediately:
- if test -n \"\$lt_option_debug\"; then
- echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2
- fi
-}
-
-# Used when --lt-debug. Prints its arguments to stdout
-# (redirection is the responsibility of the caller)
-func_lt_dump_args ()
-{
- lt_dump_args_N=1;
- for lt_arg
- do
- \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\"
- lt_dump_args_N=\`expr \$lt_dump_args_N + 1\`
- done
-}
-
-# Core function for launching the target application
-func_exec_program_core ()
-{
-"
- case $host in
- # Backslashes separate directories on plain windows
- *-*-mingw | *-*-os2* | *-cegcc*)
- $ECHO "\
- if test -n \"\$lt_option_debug\"; then
- \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2
- func_lt_dump_args \${1+\"\$@\"} 1>&2
- fi
- exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
-"
- ;;
-
- *)
- $ECHO "\
- if test -n \"\$lt_option_debug\"; then
- \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2
- func_lt_dump_args \${1+\"\$@\"} 1>&2
- fi
- exec \"\$progdir/\$program\" \${1+\"\$@\"}
-"
- ;;
- esac
- $ECHO "\
- \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
- exit 1
-}
-
-# A function to encapsulate launching the target application
-# Strips options in the --lt-* namespace from \$@ and
-# launches target application with the remaining arguments.
-func_exec_program ()
-{
- case \" \$* \" in
- *\\ --lt-*)
- for lt_wr_arg
- do
- case \$lt_wr_arg in
- --lt-*) ;;
- *) set x \"\$@\" \"\$lt_wr_arg\"; shift;;
- esac
- shift
- done ;;
- esac
- func_exec_program_core \${1+\"\$@\"}
-}
-
- # Parse options
- func_parse_lt_options \"\$0\" \${1+\"\$@\"}
-
- # Find the directory that this script lives in.
- thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\`
- test \"x\$thisdir\" = \"x\$file\" && thisdir=.
-
- # Follow symbolic links until we get to the real thisdir.
- file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\`
- while test -n \"\$file\"; do
- destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\`
-
- # If there was a directory component, then change thisdir.
- if test \"x\$destdir\" != \"x\$file\"; then
- case \"\$destdir\" in
- [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
- *) thisdir=\"\$thisdir/\$destdir\" ;;
- esac
- fi
-
- file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\`
- file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\`
- done
-
- # Usually 'no', except on cygwin/mingw when embedded into
- # the cwrapper.
- WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1
- if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then
- # special case for '.'
- if test \"\$thisdir\" = \".\"; then
- thisdir=\`pwd\`
- fi
- # remove .libs from thisdir
- case \"\$thisdir\" in
- *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;;
- $objdir ) thisdir=. ;;
- esac
- fi
-
- # Try to get the absolute directory name.
- absdir=\`cd \"\$thisdir\" && pwd\`
- test -n \"\$absdir\" && thisdir=\"\$absdir\"
-"
-
- if test "$fast_install" = yes; then
- $ECHO "\
- program=lt-'$outputname'$exeext
- progdir=\"\$thisdir/$objdir\"
-
- if test ! -f \"\$progdir/\$program\" ||
- { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
- test \"X\$file\" != \"X\$progdir/\$program\"; }; then
-
- file=\"\$\$-\$program\"
-
- if test ! -d \"\$progdir\"; then
- $MKDIR \"\$progdir\"
- else
- $RM \"\$progdir/\$file\"
- fi"
-
- $ECHO "\
-
- # relink executable if necessary
- if test -n \"\$relink_command\"; then
- if relink_command_output=\`eval \$relink_command 2>&1\`; then :
- else
- $ECHO \"\$relink_command_output\" >&2
- $RM \"\$progdir/\$file\"
- exit 1
- fi
- fi
-
- $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
- { $RM \"\$progdir/\$program\";
- $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; }
- $RM \"\$progdir/\$file\"
- fi"
- else
- $ECHO "\
- program='$outputname'
- progdir=\"\$thisdir/$objdir\"
-"
- fi
-
- $ECHO "\
-
- if test -f \"\$progdir/\$program\"; then"
-
- # fixup the dll searchpath if we need to.
- #
- # Fix the DLL searchpath if we need to. Do this before prepending
- # to shlibpath, because on Windows, both are PATH and uninstalled
- # libraries must come first.
- if test -n "$dllsearchpath"; then
- $ECHO "\
- # Add the dll search path components to the executable PATH
- PATH=$dllsearchpath:\$PATH
-"
- fi
-
- # Export our shlibpath_var if we have one.
- if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
- $ECHO "\
- # Add our own library path to $shlibpath_var
- $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
-
- # Some systems cannot cope with colon-terminated $shlibpath_var
- # The second colon is a workaround for a bug in BeOS R4 sed
- $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\`
-
- export $shlibpath_var
-"
- fi
-
- $ECHO "\
- if test \"\$libtool_execute_magic\" != \"$magic\"; then
- # Run the actual program with our arguments.
- func_exec_program \${1+\"\$@\"}
- fi
- else
- # The program doesn't exist.
- \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
- \$ECHO \"This script is just a wrapper for \$program.\" 1>&2
- \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
- exit 1
- fi
-fi\
-"
-}
-
-
-# func_emit_cwrapperexe_src
-# emit the source code for a wrapper executable on stdout
-# Must ONLY be called from within func_mode_link because
-# it depends on a number of variable set therein.
-func_emit_cwrapperexe_src ()
-{
- cat <<EOF
-
-/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
- Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
-
- The $output program cannot be directly executed until all the libtool
- libraries that it depends on are installed.
-
- This wrapper executable should never be moved out of the build directory.
- If it is, it will not operate correctly.
-*/
-EOF
- cat <<"EOF"
-#ifdef _MSC_VER
-# define _CRT_SECURE_NO_DEPRECATE 1
-#endif
-#include <stdio.h>
-#include <stdlib.h>
-#ifdef _MSC_VER
-# include <direct.h>
-# include <process.h>
-# include <io.h>
-#else
-# include <unistd.h>
-# include <stdint.h>
-# ifdef __CYGWIN__
-# include <io.h>
-# endif
-#endif
-#include <malloc.h>
-#include <stdarg.h>
-#include <assert.h>
-#include <string.h>
-#include <ctype.h>
-#include <errno.h>
-#include <fcntl.h>
-#include <sys/stat.h>
-
-/* declarations of non-ANSI functions */
-#if defined(__MINGW32__)
-# ifdef __STRICT_ANSI__
-int _putenv (const char *);
-# endif
-#elif defined(__CYGWIN__)
-# ifdef __STRICT_ANSI__
-char *realpath (const char *, char *);
-int putenv (char *);
-int setenv (const char *, const char *, int);
-# endif
-/* #elif defined (other platforms) ... */
-#endif
-
-/* portability defines, excluding path handling macros */
-#if defined(_MSC_VER)
-# define setmode _setmode
-# define stat _stat
-# define chmod _chmod
-# define getcwd _getcwd
-# define putenv _putenv
-# define S_IXUSR _S_IEXEC
-# ifndef _INTPTR_T_DEFINED
-# define _INTPTR_T_DEFINED
-# define intptr_t int
-# endif
-#elif defined(__MINGW32__)
-# define setmode _setmode
-# define stat _stat
-# define chmod _chmod
-# define getcwd _getcwd
-# define putenv _putenv
-#elif defined(__CYGWIN__)
-# define HAVE_SETENV
-# define FOPEN_WB "wb"
-/* #elif defined (other platforms) ... */
-#endif
-
-#if defined(PATH_MAX)
-# define LT_PATHMAX PATH_MAX
-#elif defined(MAXPATHLEN)
-# define LT_PATHMAX MAXPATHLEN
-#else
-# define LT_PATHMAX 1024
-#endif
-
-#ifndef S_IXOTH
-# define S_IXOTH 0
-#endif
-#ifndef S_IXGRP
-# define S_IXGRP 0
-#endif
-
-/* path handling portability macros */
-#ifndef DIR_SEPARATOR
-# define DIR_SEPARATOR '/'
-# define PATH_SEPARATOR ':'
-#endif
-
-#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
- defined (__OS2__)
-# define HAVE_DOS_BASED_FILE_SYSTEM
-# define FOPEN_WB "wb"
-# ifndef DIR_SEPARATOR_2
-# define DIR_SEPARATOR_2 '\\'
-# endif
-# ifndef PATH_SEPARATOR_2
-# define PATH_SEPARATOR_2 ';'
-# endif
-#endif
-
-#ifndef DIR_SEPARATOR_2
-# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
-#else /* DIR_SEPARATOR_2 */
-# define IS_DIR_SEPARATOR(ch) \
- (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
-#endif /* DIR_SEPARATOR_2 */
-
-#ifndef PATH_SEPARATOR_2
-# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
-#else /* PATH_SEPARATOR_2 */
-# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
-#endif /* PATH_SEPARATOR_2 */
-
-#ifndef FOPEN_WB
-# define FOPEN_WB "w"
-#endif
-#ifndef _O_BINARY
-# define _O_BINARY 0
-#endif
-
-#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type)))
-#define XFREE(stale) do { \
- if (stale) { free ((void *) stale); stale = 0; } \
-} while (0)
-
-#if defined(LT_DEBUGWRAPPER)
-static int lt_debug = 1;
-#else
-static int lt_debug = 0;
-#endif
-
-const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */
-
-void *xmalloc (size_t num);
-char *xstrdup (const char *string);
-const char *base_name (const char *name);
-char *find_executable (const char *wrapper);
-char *chase_symlinks (const char *pathspec);
-int make_executable (const char *path);
-int check_executable (const char *path);
-char *strendzap (char *str, const char *pat);
-void lt_debugprintf (const char *file, int line, const char *fmt, ...);
-void lt_fatal (const char *file, int line, const char *message, ...);
-static const char *nonnull (const char *s);
-static const char *nonempty (const char *s);
-void lt_setenv (const char *name, const char *value);
-char *lt_extend_str (const char *orig_value, const char *add, int to_end);
-void lt_update_exe_path (const char *name, const char *value);
-void lt_update_lib_path (const char *name, const char *value);
-char **prepare_spawn (char **argv);
-void lt_dump_script (FILE *f);
-EOF
-
- cat <<EOF
-volatile const char * MAGIC_EXE = "$magic_exe";
-const char * LIB_PATH_VARNAME = "$shlibpath_var";
-EOF
-
- if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
- func_to_host_path "$temp_rpath"
- cat <<EOF
-const char * LIB_PATH_VALUE = "$func_to_host_path_result";
-EOF
- else
- cat <<"EOF"
-const char * LIB_PATH_VALUE = "";
-EOF
- fi
-
- if test -n "$dllsearchpath"; then
- func_to_host_path "$dllsearchpath:"
- cat <<EOF
-const char * EXE_PATH_VARNAME = "PATH";
-const char * EXE_PATH_VALUE = "$func_to_host_path_result";
-EOF
- else
- cat <<"EOF"
-const char * EXE_PATH_VARNAME = "";
-const char * EXE_PATH_VALUE = "";
-EOF
- fi
-
- if test "$fast_install" = yes; then
- cat <<EOF
-const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */
-EOF
- else
- cat <<EOF
-const char * TARGET_PROGRAM_NAME = "$outputname"; /* hopefully, no .exe */
-EOF
- fi
-
-
- cat <<"EOF"
-
-#define LTWRAPPER_OPTION_PREFIX "--lt-"
-
-static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX;
-static const char *dumpscript_opt = LTWRAPPER_OPTION_PREFIX "dump-script";
-static const char *debug_opt = LTWRAPPER_OPTION_PREFIX "debug";
-
-int
-main (int argc, char *argv[])
-{
- char **newargz;
- int newargc;
- char *tmp_pathspec;
- char *actual_cwrapper_path;
- char *actual_cwrapper_name;
- char *target_name;
- char *lt_argv_zero;
- intptr_t rval = 127;
-
- int i;
-
- program_name = (char *) xstrdup (base_name (argv[0]));
- newargz = XMALLOC (char *, argc + 1);
-
- /* very simple arg parsing; don't want to rely on getopt
- * also, copy all non cwrapper options to newargz, except
- * argz[0], which is handled differently
- */
- newargc=0;
- for (i = 1; i < argc; i++)
- {
- if (strcmp (argv[i], dumpscript_opt) == 0)
- {
-EOF
- case "$host" in
- *mingw* | *cygwin* )
- # make stdout use "unix" line endings
- echo " setmode(1,_O_BINARY);"
- ;;
- esac
-
- cat <<"EOF"
- lt_dump_script (stdout);
- return 0;
- }
- if (strcmp (argv[i], debug_opt) == 0)
- {
- lt_debug = 1;
- continue;
- }
- if (strcmp (argv[i], ltwrapper_option_prefix) == 0)
- {
- /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
- namespace, but it is not one of the ones we know about and
- have already dealt with, above (inluding dump-script), then
- report an error. Otherwise, targets might begin to believe
- they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
- namespace. The first time any user complains about this, we'll
- need to make LTWRAPPER_OPTION_PREFIX a configure-time option
- or a configure.ac-settable value.
- */
- lt_fatal (__FILE__, __LINE__,
- "unrecognized %s option: '%s'",
- ltwrapper_option_prefix, argv[i]);
- }
- /* otherwise ... */
- newargz[++newargc] = xstrdup (argv[i]);
- }
- newargz[++newargc] = NULL;
-
-EOF
- cat <<EOF
- /* The GNU banner must be the first non-error debug message */
- lt_debugprintf (__FILE__, __LINE__, "libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\n");
-EOF
- cat <<"EOF"
- lt_debugprintf (__FILE__, __LINE__, "(main) argv[0]: %s\n", argv[0]);
- lt_debugprintf (__FILE__, __LINE__, "(main) program_name: %s\n", program_name);
-
- tmp_pathspec = find_executable (argv[0]);
- if (tmp_pathspec == NULL)
- lt_fatal (__FILE__, __LINE__, "couldn't find %s", argv[0]);
- lt_debugprintf (__FILE__, __LINE__,
- "(main) found exe (before symlink chase) at: %s\n",
- tmp_pathspec);
-
- actual_cwrapper_path = chase_symlinks (tmp_pathspec);
- lt_debugprintf (__FILE__, __LINE__,
- "(main) found exe (after symlink chase) at: %s\n",
- actual_cwrapper_path);
- XFREE (tmp_pathspec);
-
- actual_cwrapper_name = xstrdup (base_name (actual_cwrapper_path));
- strendzap (actual_cwrapper_path, actual_cwrapper_name);
-
- /* wrapper name transforms */
- strendzap (actual_cwrapper_name, ".exe");
- tmp_pathspec = lt_extend_str (actual_cwrapper_name, ".exe", 1);
- XFREE (actual_cwrapper_name);
- actual_cwrapper_name = tmp_pathspec;
- tmp_pathspec = 0;
-
- /* target_name transforms -- use actual target program name; might have lt- prefix */
- target_name = xstrdup (base_name (TARGET_PROGRAM_NAME));
- strendzap (target_name, ".exe");
- tmp_pathspec = lt_extend_str (target_name, ".exe", 1);
- XFREE (target_name);
- target_name = tmp_pathspec;
- tmp_pathspec = 0;
-
- lt_debugprintf (__FILE__, __LINE__,
- "(main) libtool target name: %s\n",
- target_name);
-EOF
-
- cat <<EOF
- newargz[0] =
- XMALLOC (char, (strlen (actual_cwrapper_path) +
- strlen ("$objdir") + 1 + strlen (actual_cwrapper_name) + 1));
- strcpy (newargz[0], actual_cwrapper_path);
- strcat (newargz[0], "$objdir");
- strcat (newargz[0], "/");
-EOF
-
- cat <<"EOF"
- /* stop here, and copy so we don't have to do this twice */
- tmp_pathspec = xstrdup (newargz[0]);
-
- /* do NOT want the lt- prefix here, so use actual_cwrapper_name */
- strcat (newargz[0], actual_cwrapper_name);
-
- /* DO want the lt- prefix here if it exists, so use target_name */
- lt_argv_zero = lt_extend_str (tmp_pathspec, target_name, 1);
- XFREE (tmp_pathspec);
- tmp_pathspec = NULL;
-EOF
-
- case $host_os in
- mingw*)
- cat <<"EOF"
- {
- char* p;
- while ((p = strchr (newargz[0], '\\')) != NULL)
- {
- *p = '/';
- }
- while ((p = strchr (lt_argv_zero, '\\')) != NULL)
- {
- *p = '/';
- }
- }
-EOF
- ;;
- esac
-
- cat <<"EOF"
- XFREE (target_name);
- XFREE (actual_cwrapper_path);
- XFREE (actual_cwrapper_name);
-
- lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */
- lt_setenv ("DUALCASE", "1"); /* for MSK sh */
- /* Update the DLL searchpath. EXE_PATH_VALUE ($dllsearchpath) must
- be prepended before (that is, appear after) LIB_PATH_VALUE ($temp_rpath)
- because on Windows, both *_VARNAMEs are PATH but uninstalled
- libraries must come first. */
- lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);
- lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);
-
- lt_debugprintf (__FILE__, __LINE__, "(main) lt_argv_zero: %s\n",
- nonnull (lt_argv_zero));
- for (i = 0; i < newargc; i++)
- {
- lt_debugprintf (__FILE__, __LINE__, "(main) newargz[%d]: %s\n",
- i, nonnull (newargz[i]));
- }
-
-EOF
-
- case $host_os in
- mingw*)
- cat <<"EOF"
- /* execv doesn't actually work on mingw as expected on unix */
- newargz = prepare_spawn (newargz);
- rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
- if (rval == -1)
- {
- /* failed to start process */
- lt_debugprintf (__FILE__, __LINE__,
- "(main) failed to launch target \"%s\": %s\n",
- lt_argv_zero, nonnull (strerror (errno)));
- return 127;
- }
- return rval;
-EOF
- ;;
- *)
- cat <<"EOF"
- execv (lt_argv_zero, newargz);
- return rval; /* =127, but avoids unused variable warning */
-EOF
- ;;
- esac
-
- cat <<"EOF"
-}
-
-void *
-xmalloc (size_t num)
-{
- void *p = (void *) malloc (num);
- if (!p)
- lt_fatal (__FILE__, __LINE__, "memory exhausted");
-
- return p;
-}
-
-char *
-xstrdup (const char *string)
-{
- return string ? strcpy ((char *) xmalloc (strlen (string) + 1),
- string) : NULL;
-}
-
-const char *
-base_name (const char *name)
-{
- const char *base;
-
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
- /* Skip over the disk name in MSDOS pathnames. */
- if (isalpha ((unsigned char) name[0]) && name[1] == ':')
- name += 2;
-#endif
-
- for (base = name; *name; name++)
- if (IS_DIR_SEPARATOR (*name))
- base = name + 1;
- return base;
-}
-
-int
-check_executable (const char *path)
-{
- struct stat st;
-
- lt_debugprintf (__FILE__, __LINE__, "(check_executable): %s\n",
- nonempty (path));
- if ((!path) || (!*path))
- return 0;
-
- if ((stat (path, &st) >= 0)
- && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH)))
- return 1;
- else
- return 0;
-}
-
-int
-make_executable (const char *path)
-{
- int rval = 0;
- struct stat st;
-
- lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n",
- nonempty (path));
- if ((!path) || (!*path))
- return 0;
-
- if (stat (path, &st) >= 0)
- {
- rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR);
- }
- return rval;
-}
-
-/* Searches for the full path of the wrapper. Returns
- newly allocated full path name if found, NULL otherwise
- Does not chase symlinks, even on platforms that support them.
-*/
-char *
-find_executable (const char *wrapper)
-{
- int has_slash = 0;
- const char *p;
- const char *p_next;
- /* static buffer for getcwd */
- char tmp[LT_PATHMAX + 1];
- int tmp_len;
- char *concat_name;
-
- lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n",
- nonempty (wrapper));
-
- if ((wrapper == NULL) || (*wrapper == '\0'))
- return NULL;
-
- /* Absolute path? */
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
- if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':')
- {
- concat_name = xstrdup (wrapper);
- if (check_executable (concat_name))
- return concat_name;
- XFREE (concat_name);
- }
- else
- {
-#endif
- if (IS_DIR_SEPARATOR (wrapper[0]))
- {
- concat_name = xstrdup (wrapper);
- if (check_executable (concat_name))
- return concat_name;
- XFREE (concat_name);
- }
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
- }
-#endif
-
- for (p = wrapper; *p; p++)
- if (*p == '/')
- {
- has_slash = 1;
- break;
- }
- if (!has_slash)
- {
- /* no slashes; search PATH */
- const char *path = getenv ("PATH");
- if (path != NULL)
- {
- for (p = path; *p; p = p_next)
- {
- const char *q;
- size_t p_len;
- for (q = p; *q; q++)
- if (IS_PATH_SEPARATOR (*q))
- break;
- p_len = q - p;
- p_next = (*q == '\0' ? q : q + 1);
- if (p_len == 0)
- {
- /* empty path: current directory */
- if (getcwd (tmp, LT_PATHMAX) == NULL)
- lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
- nonnull (strerror (errno)));
- tmp_len = strlen (tmp);
- concat_name =
- XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
- memcpy (concat_name, tmp, tmp_len);
- concat_name[tmp_len] = '/';
- strcpy (concat_name + tmp_len + 1, wrapper);
- }
- else
- {
- concat_name =
- XMALLOC (char, p_len + 1 + strlen (wrapper) + 1);
- memcpy (concat_name, p, p_len);
- concat_name[p_len] = '/';
- strcpy (concat_name + p_len + 1, wrapper);
- }
- if (check_executable (concat_name))
- return concat_name;
- XFREE (concat_name);
- }
- }
- /* not found in PATH; assume curdir */
- }
- /* Relative path | not found in path: prepend cwd */
- if (getcwd (tmp, LT_PATHMAX) == NULL)
- lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
- nonnull (strerror (errno)));
- tmp_len = strlen (tmp);
- concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
- memcpy (concat_name, tmp, tmp_len);
- concat_name[tmp_len] = '/';
- strcpy (concat_name + tmp_len + 1, wrapper);
-
- if (check_executable (concat_name))
- return concat_name;
- XFREE (concat_name);
- return NULL;
-}
-
-char *
-chase_symlinks (const char *pathspec)
-{
-#ifndef S_ISLNK
- return xstrdup (pathspec);
-#else
- char buf[LT_PATHMAX];
- struct stat s;
- char *tmp_pathspec = xstrdup (pathspec);
- char *p;
- int has_symlinks = 0;
- while (strlen (tmp_pathspec) && !has_symlinks)
- {
- lt_debugprintf (__FILE__, __LINE__,
- "checking path component for symlinks: %s\n",
- tmp_pathspec);
- if (lstat (tmp_pathspec, &s) == 0)
- {
- if (S_ISLNK (s.st_mode) != 0)
- {
- has_symlinks = 1;
- break;
- }
-
- /* search backwards for last DIR_SEPARATOR */
- p = tmp_pathspec + strlen (tmp_pathspec) - 1;
- while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
- p--;
- if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
- {
- /* no more DIR_SEPARATORS left */
- break;
- }
- *p = '\0';
- }
- else
- {
- lt_fatal (__FILE__, __LINE__,
- "error accessing file \"%s\": %s",
- tmp_pathspec, nonnull (strerror (errno)));
- }
- }
- XFREE (tmp_pathspec);
-
- if (!has_symlinks)
- {
- return xstrdup (pathspec);
- }
-
- tmp_pathspec = realpath (pathspec, buf);
- if (tmp_pathspec == 0)
- {
- lt_fatal (__FILE__, __LINE__,
- "could not follow symlinks for %s", pathspec);
- }
- return xstrdup (tmp_pathspec);
-#endif
-}
-
-char *
-strendzap (char *str, const char *pat)
-{
- size_t len, patlen;
-
- assert (str != NULL);
- assert (pat != NULL);
-
- len = strlen (str);
- patlen = strlen (pat);
-
- if (patlen <= len)
- {
- str += len - patlen;
- if (strcmp (str, pat) == 0)
- *str = '\0';
- }
- return str;
-}
-
-void
-lt_debugprintf (const char *file, int line, const char *fmt, ...)
-{
- va_list args;
- if (lt_debug)
- {
- (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line);
- va_start (args, fmt);
- (void) vfprintf (stderr, fmt, args);
- va_end (args);
- }
-}
-
-static void
-lt_error_core (int exit_status, const char *file,
- int line, const char *mode,
- const char *message, va_list ap)
-{
- fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode);
- vfprintf (stderr, message, ap);
- fprintf (stderr, ".\n");
-
- if (exit_status >= 0)
- exit (exit_status);
-}
-
-void
-lt_fatal (const char *file, int line, const char *message, ...)
-{
- va_list ap;
- va_start (ap, message);
- lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap);
- va_end (ap);
-}
-
-static const char *
-nonnull (const char *s)
-{
- return s ? s : "(null)";
-}
-
-static const char *
-nonempty (const char *s)
-{
- return (s && !*s) ? "(empty)" : nonnull (s);
-}
-
-void
-lt_setenv (const char *name, const char *value)
-{
- lt_debugprintf (__FILE__, __LINE__,
- "(lt_setenv) setting '%s' to '%s'\n",
- nonnull (name), nonnull (value));
- {
-#ifdef HAVE_SETENV
- /* always make a copy, for consistency with !HAVE_SETENV */
- char *str = xstrdup (value);
- setenv (name, str, 1);
-#else
- int len = strlen (name) + 1 + strlen (value) + 1;
- char *str = XMALLOC (char, len);
- sprintf (str, "%s=%s", name, value);
- if (putenv (str) != EXIT_SUCCESS)
- {
- XFREE (str);
- }
-#endif
- }
-}
-
-char *
-lt_extend_str (const char *orig_value, const char *add, int to_end)
-{
- char *new_value;
- if (orig_value && *orig_value)
- {
- int orig_value_len = strlen (orig_value);
- int add_len = strlen (add);
- new_value = XMALLOC (char, add_len + orig_value_len + 1);
- if (to_end)
- {
- strcpy (new_value, orig_value);
- strcpy (new_value + orig_value_len, add);
- }
- else
- {
- strcpy (new_value, add);
- strcpy (new_value + add_len, orig_value);
- }
- }
- else
- {
- new_value = xstrdup (add);
- }
- return new_value;
-}
-
-void
-lt_update_exe_path (const char *name, const char *value)
-{
- lt_debugprintf (__FILE__, __LINE__,
- "(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
- nonnull (name), nonnull (value));
-
- if (name && *name && value && *value)
- {
- char *new_value = lt_extend_str (getenv (name), value, 0);
- /* some systems can't cope with a ':'-terminated path #' */
- int len = strlen (new_value);
- while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
- {
- new_value[len-1] = '\0';
- }
- lt_setenv (name, new_value);
- XFREE (new_value);
- }
-}
-
-void
-lt_update_lib_path (const char *name, const char *value)
-{
- lt_debugprintf (__FILE__, __LINE__,
- "(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
- nonnull (name), nonnull (value));
-
- if (name && *name && value && *value)
- {
- char *new_value = lt_extend_str (getenv (name), value, 0);
- lt_setenv (name, new_value);
- XFREE (new_value);
- }
-}
-
-EOF
- case $host_os in
- mingw*)
- cat <<"EOF"
-
-/* Prepares an argument vector before calling spawn().
- Note that spawn() does not by itself call the command interpreter
- (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") :
- ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO);
- GetVersionEx(&v);
- v.dwPlatformId == VER_PLATFORM_WIN32_NT;
- }) ? "cmd.exe" : "command.com").
- Instead it simply concatenates the arguments, separated by ' ', and calls
- CreateProcess(). We must quote the arguments since Win32 CreateProcess()
- interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a
- special way:
- - Space and tab are interpreted as delimiters. They are not treated as
- delimiters if they are surrounded by double quotes: "...".
- - Unescaped double quotes are removed from the input. Their only effect is
- that within double quotes, space and tab are treated like normal
- characters.
- - Backslashes not followed by double quotes are not special.
- - But 2*n+1 backslashes followed by a double quote become
- n backslashes followed by a double quote (n >= 0):
- \" -> "
- \\\" -> \"
- \\\\\" -> \\"
- */
-#define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
-#define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
-char **
-prepare_spawn (char **argv)
-{
- size_t argc;
- char **new_argv;
- size_t i;
-
- /* Count number of arguments. */
- for (argc = 0; argv[argc] != NULL; argc++)
- ;
-
- /* Allocate new argument vector. */
- new_argv = XMALLOC (char *, argc + 1);
-
- /* Put quoted arguments into the new argument vector. */
- for (i = 0; i < argc; i++)
- {
- const char *string = argv[i];
-
- if (string[0] == '\0')
- new_argv[i] = xstrdup ("\"\"");
- else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL)
- {
- int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL);
- size_t length;
- unsigned int backslashes;
- const char *s;
- char *quoted_string;
- char *p;
-
- length = 0;
- backslashes = 0;
- if (quote_around)
- length++;
- for (s = string; *s != '\0'; s++)
- {
- char c = *s;
- if (c == '"')
- length += backslashes + 1;
- length++;
- if (c == '\\')
- backslashes++;
- else
- backslashes = 0;
- }
- if (quote_around)
- length += backslashes + 1;
-
- quoted_string = XMALLOC (char, length + 1);
-
- p = quoted_string;
- backslashes = 0;
- if (quote_around)
- *p++ = '"';
- for (s = string; *s != '\0'; s++)
- {
- char c = *s;
- if (c == '"')
- {
- unsigned int j;
- for (j = backslashes + 1; j > 0; j--)
- *p++ = '\\';
- }
- *p++ = c;
- if (c == '\\')
- backslashes++;
- else
- backslashes = 0;
- }
- if (quote_around)
- {
- unsigned int j;
- for (j = backslashes; j > 0; j--)
- *p++ = '\\';
- *p++ = '"';
- }
- *p = '\0';
-
- new_argv[i] = quoted_string;
- }
- else
- new_argv[i] = (char *) string;
- }
- new_argv[argc] = NULL;
-
- return new_argv;
-}
-EOF
- ;;
- esac
-
- cat <<"EOF"
-void lt_dump_script (FILE* f)
-{
-EOF
- func_emit_wrapper yes |
- $SED -n -e '
-s/^\(.\{79\}\)\(..*\)/\1\
-\2/
-h
-s/\([\\"]\)/\\\1/g
-s/$/\\n/
-s/\([^\n]*\).*/ fputs ("\1", f);/p
-g
-D'
- cat <<"EOF"
-}
-EOF
-}
-# end: func_emit_cwrapperexe_src
-
-# func_win32_import_lib_p ARG
-# True if ARG is an import lib, as indicated by $file_magic_cmd
-func_win32_import_lib_p ()
-{
- $opt_debug
- case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in
- *import*) : ;;
- *) false ;;
- esac
-}
-
-# func_mode_link arg...
-func_mode_link ()
-{
- $opt_debug
- case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
- # It is impossible to link a dll without this setting, and
- # we shouldn't force the makefile maintainer to figure out
- # which system we are compiling for in order to pass an extra
- # flag for every libtool invocation.
- # allow_undefined=no
-
- # FIXME: Unfortunately, there are problems with the above when trying
- # to make a dll which has undefined symbols, in which case not
- # even a static library is built. For now, we need to specify
- # -no-undefined on the libtool link line when we can be certain
- # that all symbols are satisfied, otherwise we get a static library.
- allow_undefined=yes
- ;;
- *)
- allow_undefined=yes
- ;;
- esac
- libtool_args=$nonopt
- base_compile="$nonopt $@"
- compile_command=$nonopt
- finalize_command=$nonopt
-
- compile_rpath=
- finalize_rpath=
- compile_shlibpath=
- finalize_shlibpath=
- convenience=
- old_convenience=
- deplibs=
- old_deplibs=
- compiler_flags=
- linker_flags=
- dllsearchpath=
- lib_search_path=`pwd`
- inst_prefix_dir=
- new_inherited_linker_flags=
-
- avoid_version=no
- bindir=
- dlfiles=
- dlprefiles=
- dlself=no
- export_dynamic=no
- export_symbols=
- export_symbols_regex=
- generated=
- libobjs=
- ltlibs=
- module=no
- no_install=no
- objs=
- non_pic_objects=
- precious_files_regex=
- prefer_static_libs=no
- preload=no
- prev=
- prevarg=
- release=
- rpath=
- xrpath=
- perm_rpath=
- temp_rpath=
- thread_safe=no
- vinfo=
- vinfo_number=no
- weak_libs=
- single_module="${wl}-single_module"
- func_infer_tag $base_compile
-
- # We need to know -static, to get the right output filenames.
- for arg
- do
- case $arg in
- -shared)
- test "$build_libtool_libs" != yes && \
- func_fatal_configuration "can not build a shared library"
- build_old_libs=no
- break
- ;;
- -all-static | -static | -static-libtool-libs)
- case $arg in
- -all-static)
- if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
- func_warning "complete static linking is impossible in this configuration"
- fi
- if test -n "$link_static_flag"; then
- dlopen_self=$dlopen_self_static
- fi
- prefer_static_libs=yes
- ;;
- -static)
- if test -z "$pic_flag" && test -n "$link_static_flag"; then
- dlopen_self=$dlopen_self_static
- fi
- prefer_static_libs=built
- ;;
- -static-libtool-libs)
- if test -z "$pic_flag" && test -n "$link_static_flag"; then
- dlopen_self=$dlopen_self_static
- fi
- prefer_static_libs=yes
- ;;
- esac
- build_libtool_libs=no
- build_old_libs=yes
- break
- ;;
- esac
- done
-
- # See if our shared archives depend on static archives.
- test -n "$old_archive_from_new_cmds" && build_old_libs=yes
-
- # Go through the arguments, transforming them on the way.
- while test "$#" -gt 0; do
- arg="$1"
- shift
- func_quote_for_eval "$arg"
- qarg=$func_quote_for_eval_unquoted_result
- func_append libtool_args " $func_quote_for_eval_result"
-
- # If the previous option needs an argument, assign it.
- if test -n "$prev"; then
- case $prev in
- output)
- func_append compile_command " @OUTPUT@"
- func_append finalize_command " @OUTPUT@"
- ;;
- esac
-
- case $prev in
- bindir)
- bindir="$arg"
- prev=
- continue
- ;;
- dlfiles|dlprefiles)
- if test "$preload" = no; then
- # Add the symbol object into the linking commands.
- func_append compile_command " @SYMFILE@"
- func_append finalize_command " @SYMFILE@"
- preload=yes
- fi
- case $arg in
- *.la | *.lo) ;; # We handle these cases below.
- force)
- if test "$dlself" = no; then
- dlself=needless
- export_dynamic=yes
- fi
- prev=
- continue
- ;;
- self)
- if test "$prev" = dlprefiles; then
- dlself=yes
- elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
- dlself=yes
- else
- dlself=needless
- export_dynamic=yes
- fi
- prev=
- continue
- ;;
- *)
- if test "$prev" = dlfiles; then
- func_append dlfiles " $arg"
- else
- func_append dlprefiles " $arg"
- fi
- prev=
- continue
- ;;
- esac
- ;;
- expsyms)
- export_symbols="$arg"
- test -f "$arg" \
- || func_fatal_error "symbol file \`$arg' does not exist"
- prev=
- continue
- ;;
- expsyms_regex)
- export_symbols_regex="$arg"
- prev=
- continue
- ;;
- framework)
- case $host in
- *-*-darwin*)
- case "$deplibs " in
- *" $qarg.ltframework "*) ;;
- *) func_append deplibs " $qarg.ltframework" # this is fixed later
- ;;
- esac
- ;;
- esac
- prev=
- continue
- ;;
- inst_prefix)
- inst_prefix_dir="$arg"
- prev=
- continue
- ;;
- objectlist)
- if test -f "$arg"; then
- save_arg=$arg
- moreargs=
- for fil in `cat "$save_arg"`
- do
-# func_append moreargs " $fil"
- arg=$fil
- # A libtool-controlled object.
-
- # Check to see that this really is a libtool object.
- if func_lalib_unsafe_p "$arg"; then
- pic_object=
- non_pic_object=
-
- # Read the .lo file
- func_source "$arg"
-
- if test -z "$pic_object" ||
- test -z "$non_pic_object" ||
- test "$pic_object" = none &&
- test "$non_pic_object" = none; then
- func_fatal_error "cannot find name of object for \`$arg'"
- fi
-
- # Extract subdirectory from the argument.
- func_dirname "$arg" "/" ""
- xdir="$func_dirname_result"
-
- if test "$pic_object" != none; then
- # Prepend the subdirectory the object is found in.
- pic_object="$xdir$pic_object"
-
- if test "$prev" = dlfiles; then
- if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
- func_append dlfiles " $pic_object"
- prev=
- continue
- else
- # If libtool objects are unsupported, then we need to preload.
- prev=dlprefiles
- fi
- fi
-
- # CHECK ME: I think I busted this. -Ossama
- if test "$prev" = dlprefiles; then
- # Preload the old-style object.
- func_append dlprefiles " $pic_object"
- prev=
- fi
-
- # A PIC object.
- func_append libobjs " $pic_object"
- arg="$pic_object"
- fi
-
- # Non-PIC object.
- if test "$non_pic_object" != none; then
- # Prepend the subdirectory the object is found in.
- non_pic_object="$xdir$non_pic_object"
-
- # A standard non-PIC object
- func_append non_pic_objects " $non_pic_object"
- if test -z "$pic_object" || test "$pic_object" = none ; then
- arg="$non_pic_object"
- fi
- else
- # If the PIC object exists, use it instead.
- # $xdir was prepended to $pic_object above.
- non_pic_object="$pic_object"
- func_append non_pic_objects " $non_pic_object"
- fi
- else
- # Only an error if not doing a dry-run.
- if $opt_dry_run; then
- # Extract subdirectory from the argument.
- func_dirname "$arg" "/" ""
- xdir="$func_dirname_result"
-
- func_lo2o "$arg"
- pic_object=$xdir$objdir/$func_lo2o_result
- non_pic_object=$xdir$func_lo2o_result
- func_append libobjs " $pic_object"
- func_append non_pic_objects " $non_pic_object"
- else
- func_fatal_error "\`$arg' is not a valid libtool object"
- fi
- fi
- done
- else
- func_fatal_error "link input file \`$arg' does not exist"
- fi
- arg=$save_arg
- prev=
- continue
- ;;
- precious_regex)
- precious_files_regex="$arg"
- prev=
- continue
- ;;
- release)
- release="-$arg"
- prev=
- continue
- ;;
- rpath | xrpath)
- # We need an absolute path.
- case $arg in
- [\\/]* | [A-Za-z]:[\\/]*) ;;
- *)
- func_fatal_error "only absolute run-paths are allowed"
- ;;
- esac
- if test "$prev" = rpath; then
- case "$rpath " in
- *" $arg "*) ;;
- *) func_append rpath " $arg" ;;
- esac
- else
- case "$xrpath " in
- *" $arg "*) ;;
- *) func_append xrpath " $arg" ;;
- esac
- fi
- prev=
- continue
- ;;
- shrext)
- shrext_cmds="$arg"
- prev=
- continue
- ;;
- weak)
- func_append weak_libs " $arg"
- prev=
- continue
- ;;
- xcclinker)
- func_append linker_flags " $qarg"
- func_append compiler_flags " $qarg"
- prev=
- func_append compile_command " $qarg"
- func_append finalize_command " $qarg"
- continue
- ;;
- xcompiler)
- func_append compiler_flags " $qarg"
- prev=
- func_append compile_command " $qarg"
- func_append finalize_command " $qarg"
- continue
- ;;
- xlinker)
- func_append linker_flags " $qarg"
- func_append compiler_flags " $wl$qarg"
- prev=
- func_append compile_command " $wl$qarg"
- func_append finalize_command " $wl$qarg"
- continue
- ;;
- *)
- eval "$prev=\"\$arg\""
- prev=
- continue
- ;;
- esac
- fi # test -n "$prev"
-
- prevarg="$arg"
-
- case $arg in
- -all-static)
- if test -n "$link_static_flag"; then
- # See comment for -static flag below, for more details.
- func_append compile_command " $link_static_flag"
- func_append finalize_command " $link_static_flag"
- fi
- continue
- ;;
-
- -allow-undefined)
- # FIXME: remove this flag sometime in the future.
- func_fatal_error "\`-allow-undefined' must not be used because it is the default"
- ;;
-
- -avoid-version)
- avoid_version=yes
- continue
- ;;
-
- -bindir)
- prev=bindir
- continue
- ;;
-
- -dlopen)
- prev=dlfiles
- continue
- ;;
-
- -dlpreopen)
- prev=dlprefiles
- continue
- ;;
-
- -export-dynamic)
- export_dynamic=yes
- continue
- ;;
-
- -export-symbols | -export-symbols-regex)
- if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
- func_fatal_error "more than one -exported-symbols argument is not allowed"
- fi
- if test "X$arg" = "X-export-symbols"; then
- prev=expsyms
- else
- prev=expsyms_regex
- fi
- continue
- ;;
-
- -framework)
- prev=framework
- continue
- ;;
-
- -inst-prefix-dir)
- prev=inst_prefix
- continue
- ;;
-
- # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
- # so, if we see these flags be careful not to treat them like -L
- -L[A-Z][A-Z]*:*)
- case $with_gcc/$host in
- no/*-*-irix* | /*-*-irix*)
- func_append compile_command " $arg"
- func_append finalize_command " $arg"
- ;;
- esac
- continue
- ;;
-
- -L*)
- func_stripname "-L" '' "$arg"
- if test -z "$func_stripname_result"; then
- if test "$#" -gt 0; then
- func_fatal_error "require no space between \`-L' and \`$1'"
- else
- func_fatal_error "need path for \`-L' option"
- fi
- fi
- func_resolve_sysroot "$func_stripname_result"
- dir=$func_resolve_sysroot_result
- # We need an absolute path.
- case $dir in
- [\\/]* | [A-Za-z]:[\\/]*) ;;
- *)
- absdir=`cd "$dir" && pwd`
- test -z "$absdir" && \
- func_fatal_error "cannot determine absolute directory name of \`$dir'"
- dir="$absdir"
- ;;
- esac
- case "$deplibs " in
- *" -L$dir "* | *" $arg "*)
- # Will only happen for absolute or sysroot arguments
- ;;
- *)
- # Preserve sysroot, but never include relative directories
- case $dir in
- [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;;
- *) func_append deplibs " -L$dir" ;;
- esac
- func_append lib_search_path " $dir"
- ;;
- esac
- case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
- testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'`
- case :$dllsearchpath: in
- *":$dir:"*) ;;
- ::) dllsearchpath=$dir;;
- *) func_append dllsearchpath ":$dir";;
- esac
- case :$dllsearchpath: in
- *":$testbindir:"*) ;;
- ::) dllsearchpath=$testbindir;;
- *) func_append dllsearchpath ":$testbindir";;
- esac
- ;;
- esac
- continue
- ;;
-
- -l*)
- if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
- case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*)
- # These systems don't actually have a C or math library (as such)
- continue
- ;;
- *-*-os2*)
- # These systems don't actually have a C library (as such)
- test "X$arg" = "X-lc" && continue
- ;;
- *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
- # Do not include libc due to us having libc/libc_r.
- test "X$arg" = "X-lc" && continue
- ;;
- *-*-rhapsody* | *-*-darwin1.[012])
- # Rhapsody C and math libraries are in the System framework
- func_append deplibs " System.ltframework"
- continue
- ;;
- *-*-sco3.2v5* | *-*-sco5v6*)
- # Causes problems with __ctype
- test "X$arg" = "X-lc" && continue
- ;;
- *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
- # Compiler inserts libc in the correct place for threads to work
- test "X$arg" = "X-lc" && continue
- ;;
- esac
- elif test "X$arg" = "X-lc_r"; then
- case $host in
- *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
- # Do not include libc_r directly, use -pthread flag.
- continue
- ;;
- esac
- fi
- func_append deplibs " $arg"
- continue
- ;;
-
- -module)
- module=yes
- continue
- ;;
-
- # Tru64 UNIX uses -model [arg] to determine the layout of C++
- # classes, name mangling, and exception handling.
- # Darwin uses the -arch flag to determine output architecture.
- -model|-arch|-isysroot|--sysroot)
- func_append compiler_flags " $arg"
- func_append compile_command " $arg"
- func_append finalize_command " $arg"
- prev=xcompiler
- continue
- ;;
-
- -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \
- |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*)
- func_append compiler_flags " $arg"
- func_append compile_command " $arg"
- func_append finalize_command " $arg"
- case "$new_inherited_linker_flags " in
- *" $arg "*) ;;
- * ) func_append new_inherited_linker_flags " $arg" ;;
- esac
- continue
- ;;
-
- -multi_module)
- single_module="${wl}-multi_module"
- continue
- ;;
-
- -no-fast-install)
- fast_install=no
- continue
- ;;
-
- -no-install)
- case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*)
- # The PATH hackery in wrapper scripts is required on Windows
- # and Darwin in order for the loader to find any dlls it needs.
- func_warning "\`-no-install' is ignored for $host"
- func_warning "assuming \`-no-fast-install' instead"
- fast_install=no
- ;;
- *) no_install=yes ;;
- esac
- continue
- ;;
-
- -no-undefined)
- allow_undefined=no
- continue
- ;;
-
- -objectlist)
- prev=objectlist
- continue
- ;;
-
- -o) prev=output ;;
-
- -precious-files-regex)
- prev=precious_regex
- continue
- ;;
-
- -release)
- prev=release
- continue
- ;;
-
- -rpath)
- prev=rpath
- continue
- ;;
-
- -R)
- prev=xrpath
- continue
- ;;
-
- -R*)
- func_stripname '-R' '' "$arg"
- dir=$func_stripname_result
- # We need an absolute path.
- case $dir in
- [\\/]* | [A-Za-z]:[\\/]*) ;;
- =*)
- func_stripname '=' '' "$dir"
- dir=$lt_sysroot$func_stripname_result
- ;;
- *)
- func_fatal_error "only absolute run-paths are allowed"
- ;;
- esac
- case "$xrpath " in
- *" $dir "*) ;;
- *) func_append xrpath " $dir" ;;
- esac
- continue
- ;;
-
- -shared)
- # The effects of -shared are defined in a previous loop.
- continue
- ;;
-
- -shrext)
- prev=shrext
- continue
- ;;
-
- -static | -static-libtool-libs)
- # The effects of -static are defined in a previous loop.
- # We used to do the same as -all-static on platforms that
- # didn't have a PIC flag, but the assumption that the effects
- # would be equivalent was wrong. It would break on at least
- # Digital Unix and AIX.
- continue
- ;;
-
- -thread-safe)
- thread_safe=yes
- continue
- ;;
-
- -version-info)
- prev=vinfo
- continue
- ;;
-
- -version-number)
- prev=vinfo
- vinfo_number=yes
- continue
- ;;
-
- -weak)
- prev=weak
- continue
- ;;
-
- -Wc,*)
- func_stripname '-Wc,' '' "$arg"
- args=$func_stripname_result
- arg=
- save_ifs="$IFS"; IFS=','
- for flag in $args; do
- IFS="$save_ifs"
- func_quote_for_eval "$flag"
- func_append arg " $func_quote_for_eval_result"
- func_append compiler_flags " $func_quote_for_eval_result"
- done
- IFS="$save_ifs"
- func_stripname ' ' '' "$arg"
- arg=$func_stripname_result
- ;;
-
- -Wl,*)
- func_stripname '-Wl,' '' "$arg"
- args=$func_stripname_result
- arg=
- save_ifs="$IFS"; IFS=','
- for flag in $args; do
- IFS="$save_ifs"
- func_quote_for_eval "$flag"
- func_append arg " $wl$func_quote_for_eval_result"
- func_append compiler_flags " $wl$func_quote_for_eval_result"
- func_append linker_flags " $func_quote_for_eval_result"
- done
- IFS="$save_ifs"
- func_stripname ' ' '' "$arg"
- arg=$func_stripname_result
- ;;
-
- -Xcompiler)
- prev=xcompiler
- continue
- ;;
-
- -Xlinker)
- prev=xlinker
- continue
- ;;
-
- -XCClinker)
- prev=xcclinker
- continue
- ;;
-
- # -msg_* for osf cc
- -msg_*)
- func_quote_for_eval "$arg"
- arg="$func_quote_for_eval_result"
- ;;
-
- # Flags to be passed through unchanged, with rationale:
- # -64, -mips[0-9] enable 64-bit mode for the SGI compiler
- # -r[0-9][0-9]* specify processor for the SGI compiler
- # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler
- # +DA*, +DD* enable 64-bit mode for the HP compiler
- # -q* compiler args for the IBM compiler
- # -m*, -t[45]*, -txscale* architecture-specific flags for GCC
- # -F/path path to uninstalled frameworks, gcc on darwin
- # -p, -pg, --coverage, -fprofile-* profiling flags for GCC
- # @file GCC response files
- # -tp=* Portland pgcc target processor selection
- # --sysroot=* for sysroot support
- # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization
- -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
- -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \
- -O*|-flto*|-fwhopr*|-fuse-linker-plugin)
- func_quote_for_eval "$arg"
- arg="$func_quote_for_eval_result"
- func_append compile_command " $arg"
- func_append finalize_command " $arg"
- func_append compiler_flags " $arg"
- continue
- ;;
-
- # Some other compiler flag.
- -* | +*)
- func_quote_for_eval "$arg"
- arg="$func_quote_for_eval_result"
- ;;
-
- *.$objext)
- # A standard object.
- func_append objs " $arg"
- ;;
-
- *.lo)
- # A libtool-controlled object.
-
- # Check to see that this really is a libtool object.
- if func_lalib_unsafe_p "$arg"; then
- pic_object=
- non_pic_object=
-
- # Read the .lo file
- func_source "$arg"
-
- if test -z "$pic_object" ||
- test -z "$non_pic_object" ||
- test "$pic_object" = none &&
- test "$non_pic_object" = none; then
- func_fatal_error "cannot find name of object for \`$arg'"
- fi
-
- # Extract subdirectory from the argument.
- func_dirname "$arg" "/" ""
- xdir="$func_dirname_result"
-
- if test "$pic_object" != none; then
- # Prepend the subdirectory the object is found in.
- pic_object="$xdir$pic_object"
-
- if test "$prev" = dlfiles; then
- if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
- func_append dlfiles " $pic_object"
- prev=
- continue
- else
- # If libtool objects are unsupported, then we need to preload.
- prev=dlprefiles
- fi
- fi
-
- # CHECK ME: I think I busted this. -Ossama
- if test "$prev" = dlprefiles; then
- # Preload the old-style object.
- func_append dlprefiles " $pic_object"
- prev=
- fi
-
- # A PIC object.
- func_append libobjs " $pic_object"
- arg="$pic_object"
- fi
-
- # Non-PIC object.
- if test "$non_pic_object" != none; then
- # Prepend the subdirectory the object is found in.
- non_pic_object="$xdir$non_pic_object"
-
- # A standard non-PIC object
- func_append non_pic_objects " $non_pic_object"
- if test -z "$pic_object" || test "$pic_object" = none ; then
- arg="$non_pic_object"
- fi
- else
- # If the PIC object exists, use it instead.
- # $xdir was prepended to $pic_object above.
- non_pic_object="$pic_object"
- func_append non_pic_objects " $non_pic_object"
- fi
- else
- # Only an error if not doing a dry-run.
- if $opt_dry_run; then
- # Extract subdirectory from the argument.
- func_dirname "$arg" "/" ""
- xdir="$func_dirname_result"
-
- func_lo2o "$arg"
- pic_object=$xdir$objdir/$func_lo2o_result
- non_pic_object=$xdir$func_lo2o_result
- func_append libobjs " $pic_object"
- func_append non_pic_objects " $non_pic_object"
- else
- func_fatal_error "\`$arg' is not a valid libtool object"
- fi
- fi
- ;;
-
- *.$libext)
- # An archive.
- func_append deplibs " $arg"
- func_append old_deplibs " $arg"
- continue
- ;;
-
- *.la)
- # A libtool-controlled library.
-
- func_resolve_sysroot "$arg"
- if test "$prev" = dlfiles; then
- # This library was specified with -dlopen.
- func_append dlfiles " $func_resolve_sysroot_result"
- prev=
- elif test "$prev" = dlprefiles; then
- # The library was specified with -dlpreopen.
- func_append dlprefiles " $func_resolve_sysroot_result"
- prev=
- else
- func_append deplibs " $func_resolve_sysroot_result"
- fi
- continue
- ;;
-
- # Some other compiler argument.
- *)
- # Unknown arguments in both finalize_command and compile_command need
- # to be aesthetically quoted because they are evaled later.
- func_quote_for_eval "$arg"
- arg="$func_quote_for_eval_result"
- ;;
- esac # arg
-
- # Now actually substitute the argument into the commands.
- if test -n "$arg"; then
- func_append compile_command " $arg"
- func_append finalize_command " $arg"
- fi
- done # argument parsing loop
-
- test -n "$prev" && \
- func_fatal_help "the \`$prevarg' option requires an argument"
-
- if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
- eval arg=\"$export_dynamic_flag_spec\"
- func_append compile_command " $arg"
- func_append finalize_command " $arg"
- fi
-
- oldlibs=
- # calculate the name of the file, without its directory
- func_basename "$output"
- outputname="$func_basename_result"
- libobjs_save="$libobjs"
-
- if test -n "$shlibpath_var"; then
- # get the directories listed in $shlibpath_var
- eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\`
- else
- shlib_search_path=
- fi
- eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
- eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
-
- func_dirname "$output" "/" ""
- output_objdir="$func_dirname_result$objdir"
- func_to_tool_file "$output_objdir/"
- tool_output_objdir=$func_to_tool_file_result
- # Create the object directory.
- func_mkdir_p "$output_objdir"
-
- # Determine the type of output
- case $output in
- "")
- func_fatal_help "you must specify an output file"
- ;;
- *.$libext) linkmode=oldlib ;;
- *.lo | *.$objext) linkmode=obj ;;
- *.la) linkmode=lib ;;
- *) linkmode=prog ;; # Anything else should be a program.
- esac
-
- specialdeplibs=
-
- libs=
- # Find all interdependent deplibs by searching for libraries
- # that are linked more than once (e.g. -la -lb -la)
- for deplib in $deplibs; do
- if $opt_preserve_dup_deps ; then
- case "$libs " in
- *" $deplib "*) func_append specialdeplibs " $deplib" ;;
- esac
- fi
- func_append libs " $deplib"
- done
-
- if test "$linkmode" = lib; then
- libs="$predeps $libs $compiler_lib_search_path $postdeps"
-
- # Compute libraries that are listed more than once in $predeps
- # $postdeps and mark them as special (i.e., whose duplicates are
- # not to be eliminated).
- pre_post_deps=
- if $opt_duplicate_compiler_generated_deps; then
- for pre_post_dep in $predeps $postdeps; do
- case "$pre_post_deps " in
- *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;;
- esac
- func_append pre_post_deps " $pre_post_dep"
- done
- fi
- pre_post_deps=
- fi
-
- deplibs=
- newdependency_libs=
- newlib_search_path=
- need_relink=no # whether we're linking any uninstalled libtool libraries
- notinst_deplibs= # not-installed libtool libraries
- notinst_path= # paths that contain not-installed libtool libraries
-
- case $linkmode in
- lib)
- passes="conv dlpreopen link"
- for file in $dlfiles $dlprefiles; do
- case $file in
- *.la) ;;
- *)
- func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file"
- ;;
- esac
- done
- ;;
- prog)
- compile_deplibs=
- finalize_deplibs=
- alldeplibs=no
- newdlfiles=
- newdlprefiles=
- passes="conv scan dlopen dlpreopen link"
- ;;
- *) passes="conv"
- ;;
- esac
-
- for pass in $passes; do
- # The preopen pass in lib mode reverses $deplibs; put it back here
- # so that -L comes before libs that need it for instance...
- if test "$linkmode,$pass" = "lib,link"; then
- ## FIXME: Find the place where the list is rebuilt in the wrong
- ## order, and fix it there properly
- tmp_deplibs=
- for deplib in $deplibs; do
- tmp_deplibs="$deplib $tmp_deplibs"
- done
- deplibs="$tmp_deplibs"
- fi
-
- if test "$linkmode,$pass" = "lib,link" ||
- test "$linkmode,$pass" = "prog,scan"; then
- libs="$deplibs"
- deplibs=
- fi
- if test "$linkmode" = prog; then
- case $pass in
- dlopen) libs="$dlfiles" ;;
- dlpreopen) libs="$dlprefiles" ;;
- link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
- esac
- fi
- if test "$linkmode,$pass" = "lib,dlpreopen"; then
- # Collect and forward deplibs of preopened libtool libs
- for lib in $dlprefiles; do
- # Ignore non-libtool-libs
- dependency_libs=
- func_resolve_sysroot "$lib"
- case $lib in
- *.la) func_source "$func_resolve_sysroot_result" ;;
- esac
-
- # Collect preopened libtool deplibs, except any this library
- # has declared as weak libs
- for deplib in $dependency_libs; do
- func_basename "$deplib"
- deplib_base=$func_basename_result
- case " $weak_libs " in
- *" $deplib_base "*) ;;
- *) func_append deplibs " $deplib" ;;
- esac
- done
- done
- libs="$dlprefiles"
- fi
- if test "$pass" = dlopen; then
- # Collect dlpreopened libraries
- save_deplibs="$deplibs"
- deplibs=
- fi
-
- for deplib in $libs; do
- lib=
- found=no
- case $deplib in
- -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \
- |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*)
- if test "$linkmode,$pass" = "prog,link"; then
- compile_deplibs="$deplib $compile_deplibs"
- finalize_deplibs="$deplib $finalize_deplibs"
- else
- func_append compiler_flags " $deplib"
- if test "$linkmode" = lib ; then
- case "$new_inherited_linker_flags " in
- *" $deplib "*) ;;
- * ) func_append new_inherited_linker_flags " $deplib" ;;
- esac
- fi
- fi
- continue
- ;;
- -l*)
- if test "$linkmode" != lib && test "$linkmode" != prog; then
- func_warning "\`-l' is ignored for archives/objects"
- continue
- fi
- func_stripname '-l' '' "$deplib"
- name=$func_stripname_result
- if test "$linkmode" = lib; then
- searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path"
- else
- searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path"
- fi
- for searchdir in $searchdirs; do
- for search_ext in .la $std_shrext .so .a; do
- # Search the libtool library
- lib="$searchdir/lib${name}${search_ext}"
- if test -f "$lib"; then
- if test "$search_ext" = ".la"; then
- found=yes
- else
- found=no
- fi
- break 2
- fi
- done
- done
- if test "$found" != yes; then
- # deplib doesn't seem to be a libtool library
- if test "$linkmode,$pass" = "prog,link"; then
- compile_deplibs="$deplib $compile_deplibs"
- finalize_deplibs="$deplib $finalize_deplibs"
- else
- deplibs="$deplib $deplibs"
- test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
- fi
- continue
- else # deplib is a libtool library
- # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
- # We need to do some special things here, and not later.
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
- case " $predeps $postdeps " in
- *" $deplib "*)
- if func_lalib_p "$lib"; then
- library_names=
- old_library=
- func_source "$lib"
- for l in $old_library $library_names; do
- ll="$l"
- done
- if test "X$ll" = "X$old_library" ; then # only static version available
- found=no
- func_dirname "$lib" "" "."
- ladir="$func_dirname_result"
- lib=$ladir/$old_library
- if test "$linkmode,$pass" = "prog,link"; then
- compile_deplibs="$deplib $compile_deplibs"
- finalize_deplibs="$deplib $finalize_deplibs"
- else
- deplibs="$deplib $deplibs"
- test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
- fi
- continue
- fi
- fi
- ;;
- *) ;;
- esac
- fi
- fi
- ;; # -l
- *.ltframework)
- if test "$linkmode,$pass" = "prog,link"; then
- compile_deplibs="$deplib $compile_deplibs"
- finalize_deplibs="$deplib $finalize_deplibs"
- else
- deplibs="$deplib $deplibs"
- if test "$linkmode" = lib ; then
- case "$new_inherited_linker_flags " in
- *" $deplib "*) ;;
- * ) func_append new_inherited_linker_flags " $deplib" ;;
- esac
- fi
- fi
- continue
- ;;
- -L*)
- case $linkmode in
- lib)
- deplibs="$deplib $deplibs"
- test "$pass" = conv && continue
- newdependency_libs="$deplib $newdependency_libs"
- func_stripname '-L' '' "$deplib"
- func_resolve_sysroot "$func_stripname_result"
- func_append newlib_search_path " $func_resolve_sysroot_result"
- ;;
- prog)
- if test "$pass" = conv; then
- deplibs="$deplib $deplibs"
- continue
- fi
- if test "$pass" = scan; then
- deplibs="$deplib $deplibs"
- else
- compile_deplibs="$deplib $compile_deplibs"
- finalize_deplibs="$deplib $finalize_deplibs"
- fi
- func_stripname '-L' '' "$deplib"
- func_resolve_sysroot "$func_stripname_result"
- func_append newlib_search_path " $func_resolve_sysroot_result"
- ;;
- *)
- func_warning "\`-L' is ignored for archives/objects"
- ;;
- esac # linkmode
- continue
- ;; # -L
- -R*)
- if test "$pass" = link; then
- func_stripname '-R' '' "$deplib"
- func_resolve_sysroot "$func_stripname_result"
- dir=$func_resolve_sysroot_result
- # Make sure the xrpath contains only unique directories.
- case "$xrpath " in
- *" $dir "*) ;;
- *) func_append xrpath " $dir" ;;
- esac
- fi
- deplibs="$deplib $deplibs"
- continue
- ;;
- *.la)
- func_resolve_sysroot "$deplib"
- lib=$func_resolve_sysroot_result
- ;;
- *.$libext)
- if test "$pass" = conv; then
- deplibs="$deplib $deplibs"
- continue
- fi
- case $linkmode in
- lib)
- # Linking convenience modules into shared libraries is allowed,
- # but linking other static libraries is non-portable.
- case " $dlpreconveniencelibs " in
- *" $deplib "*) ;;
- *)
- valid_a_lib=no
- case $deplibs_check_method in
- match_pattern*)
- set dummy $deplibs_check_method; shift
- match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
- if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \
- | $EGREP "$match_pattern_regex" > /dev/null; then
- valid_a_lib=yes
- fi
- ;;
- pass_all)
- valid_a_lib=yes
- ;;
- esac
- if test "$valid_a_lib" != yes; then
- echo
- $ECHO "*** Warning: Trying to link with static lib archive $deplib."
- echo "*** I have the capability to make that library automatically link in when"
- echo "*** you link to this library. But I can only do this if you have a"
- echo "*** shared version of the library, which you do not appear to have"
- echo "*** because the file extensions .$libext of this argument makes me believe"
- echo "*** that it is just a static archive that I should not use here."
- else
- echo
- $ECHO "*** Warning: Linking the shared library $output against the"
- $ECHO "*** static library $deplib is not portable!"
- deplibs="$deplib $deplibs"
- fi
- ;;
- esac
- continue
- ;;
- prog)
- if test "$pass" != link; then
- deplibs="$deplib $deplibs"
- else
- compile_deplibs="$deplib $compile_deplibs"
- finalize_deplibs="$deplib $finalize_deplibs"
- fi
- continue
- ;;
- esac # linkmode
- ;; # *.$libext
- *.lo | *.$objext)
- if test "$pass" = conv; then
- deplibs="$deplib $deplibs"
- elif test "$linkmode" = prog; then
- if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
- # If there is no dlopen support or we're linking statically,
- # we need to preload.
- func_append newdlprefiles " $deplib"
- compile_deplibs="$deplib $compile_deplibs"
- finalize_deplibs="$deplib $finalize_deplibs"
- else
- func_append newdlfiles " $deplib"
- fi
- fi
- continue
- ;;
- %DEPLIBS%)
- alldeplibs=yes
- continue
- ;;
- esac # case $deplib
-
- if test "$found" = yes || test -f "$lib"; then :
- else
- func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'"
- fi
-
- # Check to see that this really is a libtool archive.
- func_lalib_unsafe_p "$lib" \
- || func_fatal_error "\`$lib' is not a valid libtool archive"
-
- func_dirname "$lib" "" "."
- ladir="$func_dirname_result"
-
- dlname=
- dlopen=
- dlpreopen=
- libdir=
- library_names=
- old_library=
- inherited_linker_flags=
- # If the library was installed with an old release of libtool,
- # it will not redefine variables installed, or shouldnotlink
- installed=yes
- shouldnotlink=no
- avoidtemprpath=
-
-
- # Read the .la file
- func_source "$lib"
-
- # Convert "-framework foo" to "foo.ltframework"
- if test -n "$inherited_linker_flags"; then
- tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'`
- for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do
- case " $new_inherited_linker_flags " in
- *" $tmp_inherited_linker_flag "*) ;;
- *) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";;
- esac
- done
- fi
- dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
- if test "$linkmode,$pass" = "lib,link" ||
- test "$linkmode,$pass" = "prog,scan" ||
- { test "$linkmode" != prog && test "$linkmode" != lib; }; then
- test -n "$dlopen" && func_append dlfiles " $dlopen"
- test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen"
- fi
-
- if test "$pass" = conv; then
- # Only check for convenience libraries
- deplibs="$lib $deplibs"
- if test -z "$libdir"; then
- if test -z "$old_library"; then
- func_fatal_error "cannot find name of link library for \`$lib'"
- fi
- # It is a libtool convenience library, so add in its objects.
- func_append convenience " $ladir/$objdir/$old_library"
- func_append old_convenience " $ladir/$objdir/$old_library"
- elif test "$linkmode" != prog && test "$linkmode" != lib; then
- func_fatal_error "\`$lib' is not a convenience library"
- fi
- tmp_libs=
- for deplib in $dependency_libs; do
- deplibs="$deplib $deplibs"
- if $opt_preserve_dup_deps ; then
- case "$tmp_libs " in
- *" $deplib "*) func_append specialdeplibs " $deplib" ;;
- esac
- fi
- func_append tmp_libs " $deplib"
- done
- continue
- fi # $pass = conv
-
-
- # Get the name of the library we link against.
- linklib=
- if test -n "$old_library" &&
- { test "$prefer_static_libs" = yes ||
- test "$prefer_static_libs,$installed" = "built,no"; }; then
- linklib=$old_library
- else
- for l in $old_library $library_names; do
- linklib="$l"
- done
- fi
- if test -z "$linklib"; then
- func_fatal_error "cannot find name of link library for \`$lib'"
- fi
-
- # This library was specified with -dlopen.
- if test "$pass" = dlopen; then
- if test -z "$libdir"; then
- func_fatal_error "cannot -dlopen a convenience library: \`$lib'"
- fi
- if test -z "$dlname" ||
- test "$dlopen_support" != yes ||
- test "$build_libtool_libs" = no; then
- # If there is no dlname, no dlopen support or we're linking
- # statically, we need to preload. We also need to preload any
- # dependent libraries so libltdl's deplib preloader doesn't
- # bomb out in the load deplibs phase.
- func_append dlprefiles " $lib $dependency_libs"
- else
- func_append newdlfiles " $lib"
- fi
- continue
- fi # $pass = dlopen
-
- # We need an absolute path.
- case $ladir in
- [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
- *)
- abs_ladir=`cd "$ladir" && pwd`
- if test -z "$abs_ladir"; then
- func_warning "cannot determine absolute directory name of \`$ladir'"
- func_warning "passing it literally to the linker, although it might fail"
- abs_ladir="$ladir"
- fi
- ;;
- esac
- func_basename "$lib"
- laname="$func_basename_result"
-
- # Find the relevant object directory and library name.
- if test "X$installed" = Xyes; then
- if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
- func_warning "library \`$lib' was moved."
- dir="$ladir"
- absdir="$abs_ladir"
- libdir="$abs_ladir"
- else
- dir="$lt_sysroot$libdir"
- absdir="$lt_sysroot$libdir"
- fi
- test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
- else
- if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
- dir="$ladir"
- absdir="$abs_ladir"
- # Remove this search path later
- func_append notinst_path " $abs_ladir"
- else
- dir="$ladir/$objdir"
- absdir="$abs_ladir/$objdir"
- # Remove this search path later
- func_append notinst_path " $abs_ladir"
- fi
- fi # $installed = yes
- func_stripname 'lib' '.la' "$laname"
- name=$func_stripname_result
-
- # This library was specified with -dlpreopen.
- if test "$pass" = dlpreopen; then
- if test -z "$libdir" && test "$linkmode" = prog; then
- func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'"
- fi
- case "$host" in
- # special handling for platforms with PE-DLLs.
- *cygwin* | *mingw* | *cegcc* )
- # Linker will automatically link against shared library if both
- # static and shared are present. Therefore, ensure we extract
- # symbols from the import library if a shared library is present
- # (otherwise, the dlopen module name will be incorrect). We do
- # this by putting the import library name into $newdlprefiles.
- # We recover the dlopen module name by 'saving' the la file
- # name in a special purpose variable, and (later) extracting the
- # dlname from the la file.
- if test -n "$dlname"; then
- func_tr_sh "$dir/$linklib"
- eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname"
- func_append newdlprefiles " $dir/$linklib"
- else
- func_append newdlprefiles " $dir/$old_library"
- # Keep a list of preopened convenience libraries to check
- # that they are being used correctly in the link pass.
- test -z "$libdir" && \
- func_append dlpreconveniencelibs " $dir/$old_library"
- fi
- ;;
- * )
- # Prefer using a static library (so that no silly _DYNAMIC symbols
- # are required to link).
- if test -n "$old_library"; then
- func_append newdlprefiles " $dir/$old_library"
- # Keep a list of preopened convenience libraries to check
- # that they are being used correctly in the link pass.
- test -z "$libdir" && \
- func_append dlpreconveniencelibs " $dir/$old_library"
- # Otherwise, use the dlname, so that lt_dlopen finds it.
- elif test -n "$dlname"; then
- func_append newdlprefiles " $dir/$dlname"
- else
- func_append newdlprefiles " $dir/$linklib"
- fi
- ;;
- esac
- fi # $pass = dlpreopen
-
- if test -z "$libdir"; then
- # Link the convenience library
- if test "$linkmode" = lib; then
- deplibs="$dir/$old_library $deplibs"
- elif test "$linkmode,$pass" = "prog,link"; then
- compile_deplibs="$dir/$old_library $compile_deplibs"
- finalize_deplibs="$dir/$old_library $finalize_deplibs"
- else
- deplibs="$lib $deplibs" # used for prog,scan pass
- fi
- continue
- fi
-
-
- if test "$linkmode" = prog && test "$pass" != link; then
- func_append newlib_search_path " $ladir"
- deplibs="$lib $deplibs"
-
- linkalldeplibs=no
- if test "$link_all_deplibs" != no || test -z "$library_names" ||
- test "$build_libtool_libs" = no; then
- linkalldeplibs=yes
- fi
-
- tmp_libs=
- for deplib in $dependency_libs; do
- case $deplib in
- -L*) func_stripname '-L' '' "$deplib"
- func_resolve_sysroot "$func_stripname_result"
- func_append newlib_search_path " $func_resolve_sysroot_result"
- ;;
- esac
- # Need to link against all dependency_libs?
- if test "$linkalldeplibs" = yes; then
- deplibs="$deplib $deplibs"
- else
- # Need to hardcode shared library paths
- # or/and link against static libraries
- newdependency_libs="$deplib $newdependency_libs"
- fi
- if $opt_preserve_dup_deps ; then
- case "$tmp_libs " in
- *" $deplib "*) func_append specialdeplibs " $deplib" ;;
- esac
- fi
- func_append tmp_libs " $deplib"
- done # for deplib
- continue
- fi # $linkmode = prog...
-
- if test "$linkmode,$pass" = "prog,link"; then
- if test -n "$library_names" &&
- { { test "$prefer_static_libs" = no ||
- test "$prefer_static_libs,$installed" = "built,yes"; } ||
- test -z "$old_library"; }; then
- # We need to hardcode the library path
- if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
- # Make sure the rpath contains only unique directories.
- case "$temp_rpath:" in
- *"$absdir:"*) ;;
- *) func_append temp_rpath "$absdir:" ;;
- esac
- fi
-
- # Hardcode the library path.
- # Skip directories that are in the system default run-time
- # search path.
- case " $sys_lib_dlsearch_path " in
- *" $absdir "*) ;;
- *)
- case "$compile_rpath " in
- *" $absdir "*) ;;
- *) func_append compile_rpath " $absdir" ;;
- esac
- ;;
- esac
- case " $sys_lib_dlsearch_path " in
- *" $libdir "*) ;;
- *)
- case "$finalize_rpath " in
- *" $libdir "*) ;;
- *) func_append finalize_rpath " $libdir" ;;
- esac
- ;;
- esac
- fi # $linkmode,$pass = prog,link...
-
- if test "$alldeplibs" = yes &&
- { test "$deplibs_check_method" = pass_all ||
- { test "$build_libtool_libs" = yes &&
- test -n "$library_names"; }; }; then
- # We only need to search for static libraries
- continue
- fi
- fi
-
- link_static=no # Whether the deplib will be linked statically
- use_static_libs=$prefer_static_libs
- if test "$use_static_libs" = built && test "$installed" = yes; then
- use_static_libs=no
- fi
- if test -n "$library_names" &&
- { test "$use_static_libs" = no || test -z "$old_library"; }; then
- case $host in
- *cygwin* | *mingw* | *cegcc*)
- # No point in relinking DLLs because paths are not encoded
- func_append notinst_deplibs " $lib"
- need_relink=no
- ;;
- *)
- if test "$installed" = no; then
- func_append notinst_deplibs " $lib"
- need_relink=yes
- fi
- ;;
- esac
- # This is a shared library
-
- # Warn about portability, can't link against -module's on some
- # systems (darwin). Don't bleat about dlopened modules though!
- dlopenmodule=""
- for dlpremoduletest in $dlprefiles; do
- if test "X$dlpremoduletest" = "X$lib"; then
- dlopenmodule="$dlpremoduletest"
- break
- fi
- done
- if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then
- echo
- if test "$linkmode" = prog; then
- $ECHO "*** Warning: Linking the executable $output against the loadable module"
- else
- $ECHO "*** Warning: Linking the shared library $output against the loadable module"
- fi
- $ECHO "*** $linklib is not portable!"
- fi
- if test "$linkmode" = lib &&
- test "$hardcode_into_libs" = yes; then
- # Hardcode the library path.
- # Skip directories that are in the system default run-time
- # search path.
- case " $sys_lib_dlsearch_path " in
- *" $absdir "*) ;;
- *)
- case "$compile_rpath " in
- *" $absdir "*) ;;
- *) func_append compile_rpath " $absdir" ;;
- esac
- ;;
- esac
- case " $sys_lib_dlsearch_path " in
- *" $libdir "*) ;;
- *)
- case "$finalize_rpath " in
- *" $libdir "*) ;;
- *) func_append finalize_rpath " $libdir" ;;
- esac
- ;;
- esac
- fi
-
- if test -n "$old_archive_from_expsyms_cmds"; then
- # figure out the soname
- set dummy $library_names
- shift
- realname="$1"
- shift
- libname=`eval "\\$ECHO \"$libname_spec\""`
- # use dlname if we got it. it's perfectly good, no?
- if test -n "$dlname"; then
- soname="$dlname"
- elif test -n "$soname_spec"; then
- # bleh windows
- case $host in
- *cygwin* | mingw* | *cegcc*)
- func_arith $current - $age
- major=$func_arith_result
- versuffix="-$major"
- ;;
- esac
- eval soname=\"$soname_spec\"
- else
- soname="$realname"
- fi
-
- # Make a new name for the extract_expsyms_cmds to use
- soroot="$soname"
- func_basename "$soroot"
- soname="$func_basename_result"
- func_stripname 'lib' '.dll' "$soname"
- newlib=libimp-$func_stripname_result.a
-
- # If the library has no export list, then create one now
- if test -f "$output_objdir/$soname-def"; then :
- else
- func_verbose "extracting exported symbol list from \`$soname'"
- func_execute_cmds "$extract_expsyms_cmds" 'exit $?'
- fi
-
- # Create $newlib
- if test -f "$output_objdir/$newlib"; then :; else
- func_verbose "generating import library for \`$soname'"
- func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?'
- fi
- # make sure the library variables are pointing to the new library
- dir=$output_objdir
- linklib=$newlib
- fi # test -n "$old_archive_from_expsyms_cmds"
-
- if test "$linkmode" = prog || test "$opt_mode" != relink; then
- add_shlibpath=
- add_dir=
- add=
- lib_linked=yes
- case $hardcode_action in
- immediate | unsupported)
- if test "$hardcode_direct" = no; then
- add="$dir/$linklib"
- case $host in
- *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
- *-*-sysv4*uw2*) add_dir="-L$dir" ;;
- *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
- *-*-unixware7*) add_dir="-L$dir" ;;
- *-*-darwin* )
- # if the lib is a (non-dlopened) module then we can not
- # link against it, someone is ignoring the earlier warnings
- if /usr/bin/file -L $add 2> /dev/null |
- $GREP ": [^:]* bundle" >/dev/null ; then
- if test "X$dlopenmodule" != "X$lib"; then
- $ECHO "*** Warning: lib $linklib is a module, not a shared library"
- if test -z "$old_library" ; then
- echo
- echo "*** And there doesn't seem to be a static archive available"
- echo "*** The link will probably fail, sorry"
- else
- add="$dir/$old_library"
- fi
- elif test -n "$old_library"; then
- add="$dir/$old_library"
- fi
- fi
- esac
- elif test "$hardcode_minus_L" = no; then
- case $host in
- *-*-sunos*) add_shlibpath="$dir" ;;
- esac
- add_dir="-L$dir"
- add="-l$name"
- elif test "$hardcode_shlibpath_var" = no; then
- add_shlibpath="$dir"
- add="-l$name"
- else
- lib_linked=no
- fi
- ;;
- relink)
- if test "$hardcode_direct" = yes &&
- test "$hardcode_direct_absolute" = no; then
- add="$dir/$linklib"
- elif test "$hardcode_minus_L" = yes; then
- add_dir="-L$absdir"
- # Try looking first in the location we're being installed to.
- if test -n "$inst_prefix_dir"; then
- case $libdir in
- [\\/]*)
- func_append add_dir " -L$inst_prefix_dir$libdir"
- ;;
- esac
- fi
- add="-l$name"
- elif test "$hardcode_shlibpath_var" = yes; then
- add_shlibpath="$dir"
- add="-l$name"
- else
- lib_linked=no
- fi
- ;;
- *) lib_linked=no ;;
- esac
-
- if test "$lib_linked" != yes; then
- func_fatal_configuration "unsupported hardcode properties"
- fi
-
- if test -n "$add_shlibpath"; then
- case :$compile_shlibpath: in
- *":$add_shlibpath:"*) ;;
- *) func_append compile_shlibpath "$add_shlibpath:" ;;
- esac
- fi
- if test "$linkmode" = prog; then
- test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
- test -n "$add" && compile_deplibs="$add $compile_deplibs"
- else
- test -n "$add_dir" && deplibs="$add_dir $deplibs"
- test -n "$add" && deplibs="$add $deplibs"
- if test "$hardcode_direct" != yes &&
- test "$hardcode_minus_L" != yes &&
- test "$hardcode_shlibpath_var" = yes; then
- case :$finalize_shlibpath: in
- *":$libdir:"*) ;;
- *) func_append finalize_shlibpath "$libdir:" ;;
- esac
- fi
- fi
- fi
-
- if test "$linkmode" = prog || test "$opt_mode" = relink; then
- add_shlibpath=
- add_dir=
- add=
- # Finalize command for both is simple: just hardcode it.
- if test "$hardcode_direct" = yes &&
- test "$hardcode_direct_absolute" = no; then
- add="$libdir/$linklib"
- elif test "$hardcode_minus_L" = yes; then
- add_dir="-L$libdir"
- add="-l$name"
- elif test "$hardcode_shlibpath_var" = yes; then
- case :$finalize_shlibpath: in
- *":$libdir:"*) ;;
- *) func_append finalize_shlibpath "$libdir:" ;;
- esac
- add="-l$name"
- elif test "$hardcode_automatic" = yes; then
- if test -n "$inst_prefix_dir" &&
- test -f "$inst_prefix_dir$libdir/$linklib" ; then
- add="$inst_prefix_dir$libdir/$linklib"
- else
- add="$libdir/$linklib"
- fi
- else
- # We cannot seem to hardcode it, guess we'll fake it.
- add_dir="-L$libdir"
- # Try looking first in the location we're being installed to.
- if test -n "$inst_prefix_dir"; then
- case $libdir in
- [\\/]*)
- func_append add_dir " -L$inst_prefix_dir$libdir"
- ;;
- esac
- fi
- add="-l$name"
- fi
-
- if test "$linkmode" = prog; then
- test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
- test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
- else
- test -n "$add_dir" && deplibs="$add_dir $deplibs"
- test -n "$add" && deplibs="$add $deplibs"
- fi
- fi
- elif test "$linkmode" = prog; then
- # Here we assume that one of hardcode_direct or hardcode_minus_L
- # is not unsupported. This is valid on all known static and
- # shared platforms.
- if test "$hardcode_direct" != unsupported; then
- test -n "$old_library" && linklib="$old_library"
- compile_deplibs="$dir/$linklib $compile_deplibs"
- finalize_deplibs="$dir/$linklib $finalize_deplibs"
- else
- compile_deplibs="-l$name -L$dir $compile_deplibs"
- finalize_deplibs="-l$name -L$dir $finalize_deplibs"
- fi
- elif test "$build_libtool_libs" = yes; then
- # Not a shared library
- if test "$deplibs_check_method" != pass_all; then
- # We're trying link a shared library against a static one
- # but the system doesn't support it.
-
- # Just print a warning and add the library to dependency_libs so
- # that the program can be linked against the static library.
- echo
- $ECHO "*** Warning: This system can not link to static lib archive $lib."
- echo "*** I have the capability to make that library automatically link in when"
- echo "*** you link to this library. But I can only do this if you have a"
- echo "*** shared version of the library, which you do not appear to have."
- if test "$module" = yes; then
- echo "*** But as you try to build a module library, libtool will still create "
- echo "*** a static module, that should work as long as the dlopening application"
- echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
- if test -z "$global_symbol_pipe"; then
- echo
- echo "*** However, this would only work if libtool was able to extract symbol"
- echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
- echo "*** not find such a program. So, this module is probably useless."
- echo "*** \`nm' from GNU binutils and a full rebuild may help."
- fi
- if test "$build_old_libs" = no; then
- build_libtool_libs=module
- build_old_libs=yes
- else
- build_libtool_libs=no
- fi
- fi
- else
- deplibs="$dir/$old_library $deplibs"
- link_static=yes
- fi
- fi # link shared/static library?
-
- if test "$linkmode" = lib; then
- if test -n "$dependency_libs" &&
- { test "$hardcode_into_libs" != yes ||
- test "$build_old_libs" = yes ||
- test "$link_static" = yes; }; then
- # Extract -R from dependency_libs
- temp_deplibs=
- for libdir in $dependency_libs; do
- case $libdir in
- -R*) func_stripname '-R' '' "$libdir"
- temp_xrpath=$func_stripname_result
- case " $xrpath " in
- *" $temp_xrpath "*) ;;
- *) func_append xrpath " $temp_xrpath";;
- esac;;
- *) func_append temp_deplibs " $libdir";;
- esac
- done
- dependency_libs="$temp_deplibs"
- fi
-
- func_append newlib_search_path " $absdir"
- # Link against this library
- test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
- # ... and its dependency_libs
- tmp_libs=
- for deplib in $dependency_libs; do
- newdependency_libs="$deplib $newdependency_libs"
- case $deplib in
- -L*) func_stripname '-L' '' "$deplib"
- func_resolve_sysroot "$func_stripname_result";;
- *) func_resolve_sysroot "$deplib" ;;
- esac
- if $opt_preserve_dup_deps ; then
- case "$tmp_libs " in
- *" $func_resolve_sysroot_result "*)
- func_append specialdeplibs " $func_resolve_sysroot_result" ;;
- esac
- fi
- func_append tmp_libs " $func_resolve_sysroot_result"
- done
-
- if test "$link_all_deplibs" != no; then
- # Add the search paths of all dependency libraries
- for deplib in $dependency_libs; do
- path=
- case $deplib in
- -L*) path="$deplib" ;;
- *.la)
- func_resolve_sysroot "$deplib"
- deplib=$func_resolve_sysroot_result
- func_dirname "$deplib" "" "."
- dir=$func_dirname_result
- # We need an absolute path.
- case $dir in
- [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
- *)
- absdir=`cd "$dir" && pwd`
- if test -z "$absdir"; then
- func_warning "cannot determine absolute directory name of \`$dir'"
- absdir="$dir"
- fi
- ;;
- esac
- if $GREP "^installed=no" $deplib > /dev/null; then
- case $host in
- *-*-darwin*)
- depdepl=
- eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
- if test -n "$deplibrary_names" ; then
- for tmp in $deplibrary_names ; do
- depdepl=$tmp
- done
- if test -f "$absdir/$objdir/$depdepl" ; then
- depdepl="$absdir/$objdir/$depdepl"
- darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
- if test -z "$darwin_install_name"; then
- darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
- fi
- func_append compiler_flags " ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
- func_append linker_flags " -dylib_file ${darwin_install_name}:${depdepl}"
- path=
- fi
- fi
- ;;
- *)
- path="-L$absdir/$objdir"
- ;;
- esac
- else
- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
- test -z "$libdir" && \
- func_fatal_error "\`$deplib' is not a valid libtool archive"
- test "$absdir" != "$libdir" && \
- func_warning "\`$deplib' seems to be moved"
-
- path="-L$absdir"
- fi
- ;;
- esac
- case " $deplibs " in
- *" $path "*) ;;
- *) deplibs="$path $deplibs" ;;
- esac
- done
- fi # link_all_deplibs != no
- fi # linkmode = lib
- done # for deplib in $libs
- if test "$pass" = link; then
- if test "$linkmode" = "prog"; then
- compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
- finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
- else
- compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
- fi
- fi
- dependency_libs="$newdependency_libs"
- if test "$pass" = dlpreopen; then
- # Link the dlpreopened libraries before other libraries
- for deplib in $save_deplibs; do
- deplibs="$deplib $deplibs"
- done
- fi
- if test "$pass" != dlopen; then
- if test "$pass" != conv; then
- # Make sure lib_search_path contains only unique directories.
- lib_search_path=
- for dir in $newlib_search_path; do
- case "$lib_search_path " in
- *" $dir "*) ;;
- *) func_append lib_search_path " $dir" ;;
- esac
- done
- newlib_search_path=
- fi
-
- if test "$linkmode,$pass" != "prog,link"; then
- vars="deplibs"
- else
- vars="compile_deplibs finalize_deplibs"
- fi
- for var in $vars dependency_libs; do
- # Add libraries to $var in reverse order
- eval tmp_libs=\"\$$var\"
- new_libs=
- for deplib in $tmp_libs; do
- # FIXME: Pedantically, this is the right thing to do, so
- # that some nasty dependency loop isn't accidentally
- # broken:
- #new_libs="$deplib $new_libs"
- # Pragmatically, this seems to cause very few problems in
- # practice:
- case $deplib in
- -L*) new_libs="$deplib $new_libs" ;;
- -R*) ;;
- *)
- # And here is the reason: when a library appears more
- # than once as an explicit dependence of a library, or
- # is implicitly linked in more than once by the
- # compiler, it is considered special, and multiple
- # occurrences thereof are not removed. Compare this
- # with having the same library being listed as a
- # dependency of multiple other libraries: in this case,
- # we know (pedantically, we assume) the library does not
- # need to be listed more than once, so we keep only the
- # last copy. This is not always right, but it is rare
- # enough that we require users that really mean to play
- # such unportable linking tricks to link the library
- # using -Wl,-lname, so that libtool does not consider it
- # for duplicate removal.
- case " $specialdeplibs " in
- *" $deplib "*) new_libs="$deplib $new_libs" ;;
- *)
- case " $new_libs " in
- *" $deplib "*) ;;
- *) new_libs="$deplib $new_libs" ;;
- esac
- ;;
- esac
- ;;
- esac
- done
- tmp_libs=
- for deplib in $new_libs; do
- case $deplib in
- -L*)
- case " $tmp_libs " in
- *" $deplib "*) ;;
- *) func_append tmp_libs " $deplib" ;;
- esac
- ;;
- *) func_append tmp_libs " $deplib" ;;
- esac
- done
- eval $var=\"$tmp_libs\"
- done # for var
- fi
- # Last step: remove runtime libs from dependency_libs
- # (they stay in deplibs)
- tmp_libs=
- for i in $dependency_libs ; do
- case " $predeps $postdeps $compiler_lib_search_path " in
- *" $i "*)
- i=""
- ;;
- esac
- if test -n "$i" ; then
- func_append tmp_libs " $i"
- fi
- done
- dependency_libs=$tmp_libs
- done # for pass
- if test "$linkmode" = prog; then
- dlfiles="$newdlfiles"
- fi
- if test "$linkmode" = prog || test "$linkmode" = lib; then
- dlprefiles="$newdlprefiles"
- fi
-
- case $linkmode in
- oldlib)
- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
- func_warning "\`-dlopen' is ignored for archives"
- fi
-
- case " $deplibs" in
- *\ -l* | *\ -L*)
- func_warning "\`-l' and \`-L' are ignored for archives" ;;
- esac
-
- test -n "$rpath" && \
- func_warning "\`-rpath' is ignored for archives"
-
- test -n "$xrpath" && \
- func_warning "\`-R' is ignored for archives"
-
- test -n "$vinfo" && \
- func_warning "\`-version-info/-version-number' is ignored for archives"
-
- test -n "$release" && \
- func_warning "\`-release' is ignored for archives"
-
- test -n "$export_symbols$export_symbols_regex" && \
- func_warning "\`-export-symbols' is ignored for archives"
-
- # Now set the variables for building old libraries.
- build_libtool_libs=no
- oldlibs="$output"
- func_append objs "$old_deplibs"
- ;;
-
- lib)
- # Make sure we only generate libraries of the form `libNAME.la'.
- case $outputname in
- lib*)
- func_stripname 'lib' '.la' "$outputname"
- name=$func_stripname_result
- eval shared_ext=\"$shrext_cmds\"
- eval libname=\"$libname_spec\"
- ;;
- *)
- test "$module" = no && \
- func_fatal_help "libtool library \`$output' must begin with \`lib'"
-
- if test "$need_lib_prefix" != no; then
- # Add the "lib" prefix for modules if required
- func_stripname '' '.la' "$outputname"
- name=$func_stripname_result
- eval shared_ext=\"$shrext_cmds\"
- eval libname=\"$libname_spec\"
- else
- func_stripname '' '.la' "$outputname"
- libname=$func_stripname_result
- fi
- ;;
- esac
-
- if test -n "$objs"; then
- if test "$deplibs_check_method" != pass_all; then
- func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs"
- else
- echo
- $ECHO "*** Warning: Linking the shared library $output against the non-libtool"
- $ECHO "*** objects $objs is not portable!"
- func_append libobjs " $objs"
- fi
- fi
-
- test "$dlself" != no && \
- func_warning "\`-dlopen self' is ignored for libtool libraries"
-
- set dummy $rpath
- shift
- test "$#" -gt 1 && \
- func_warning "ignoring multiple \`-rpath's for a libtool library"
-
- install_libdir="$1"
-
- oldlibs=
- if test -z "$rpath"; then
- if test "$build_libtool_libs" = yes; then
- # Building a libtool convenience library.
- # Some compilers have problems with a `.al' extension so
- # convenience libraries should have the same extension an
- # archive normally would.
- oldlibs="$output_objdir/$libname.$libext $oldlibs"
- build_libtool_libs=convenience
- build_old_libs=yes
- fi
-
- test -n "$vinfo" && \
- func_warning "\`-version-info/-version-number' is ignored for convenience libraries"
-
- test -n "$release" && \
- func_warning "\`-release' is ignored for convenience libraries"
- else
-
- # Parse the version information argument.
- save_ifs="$IFS"; IFS=':'
- set dummy $vinfo 0 0 0
- shift
- IFS="$save_ifs"
-
- test -n "$7" && \
- func_fatal_help "too many parameters to \`-version-info'"
-
- # convert absolute version numbers to libtool ages
- # this retains compatibility with .la files and attempts
- # to make the code below a bit more comprehensible
-
- case $vinfo_number in
- yes)
- number_major="$1"
- number_minor="$2"
- number_revision="$3"
- #
- # There are really only two kinds -- those that
- # use the current revision as the major version
- # and those that subtract age and use age as
- # a minor version. But, then there is irix
- # which has an extra 1 added just for fun
- #
- case $version_type in
- # correct linux to gnu/linux during the next big refactor
- darwin|linux|osf|windows|none)
- func_arith $number_major + $number_minor
- current=$func_arith_result
- age="$number_minor"
- revision="$number_revision"
- ;;
- freebsd-aout|freebsd-elf|qnx|sunos)
- current="$number_major"
- revision="$number_minor"
- age="0"
- ;;
- irix|nonstopux)
- func_arith $number_major + $number_minor
- current=$func_arith_result
- age="$number_minor"
- revision="$number_minor"
- lt_irix_increment=no
- ;;
- esac
- ;;
- no)
- current="$1"
- revision="$2"
- age="$3"
- ;;
- esac
-
- # Check that each of the things are valid numbers.
- case $current in
- 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
- *)
- func_error "CURRENT \`$current' must be a nonnegative integer"
- func_fatal_error "\`$vinfo' is not valid version information"
- ;;
- esac
-
- case $revision in
- 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
- *)
- func_error "REVISION \`$revision' must be a nonnegative integer"
- func_fatal_error "\`$vinfo' is not valid version information"
- ;;
- esac
-
- case $age in
- 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
- *)
- func_error "AGE \`$age' must be a nonnegative integer"
- func_fatal_error "\`$vinfo' is not valid version information"
- ;;
- esac
-
- if test "$age" -gt "$current"; then
- func_error "AGE \`$age' is greater than the current interface number \`$current'"
- func_fatal_error "\`$vinfo' is not valid version information"
- fi
-
- # Calculate the version variables.
- major=
- versuffix=
- verstring=
- case $version_type in
- none) ;;
-
- darwin)
- # Like Linux, but with the current version available in
- # verstring for coding it into the library header
- func_arith $current - $age
- major=.$func_arith_result
- versuffix="$major.$age.$revision"
- # Darwin ld doesn't like 0 for these options...
- func_arith $current + 1
- minor_current=$func_arith_result
- xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
- verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
- ;;
-
- freebsd-aout)
- major=".$current"
- versuffix=".$current.$revision";
- ;;
-
- freebsd-elf)
- major=".$current"
- versuffix=".$current"
- ;;
-
- irix | nonstopux)
- if test "X$lt_irix_increment" = "Xno"; then
- func_arith $current - $age
- else
- func_arith $current - $age + 1
- fi
- major=$func_arith_result
-
- case $version_type in
- nonstopux) verstring_prefix=nonstopux ;;
- *) verstring_prefix=sgi ;;
- esac
- verstring="$verstring_prefix$major.$revision"
-
- # Add in all the interfaces that we are compatible with.
- loop=$revision
- while test "$loop" -ne 0; do
- func_arith $revision - $loop
- iface=$func_arith_result
- func_arith $loop - 1
- loop=$func_arith_result
- verstring="$verstring_prefix$major.$iface:$verstring"
- done
-
- # Before this point, $major must not contain `.'.
- major=.$major
- versuffix="$major.$revision"
- ;;
-
- linux) # correct to gnu/linux during the next big refactor
- func_arith $current - $age
- major=.$func_arith_result
- versuffix="$major.$age.$revision"
- ;;
-
- osf)
- func_arith $current - $age
- major=.$func_arith_result
- versuffix=".$current.$age.$revision"
- verstring="$current.$age.$revision"
-
- # Add in all the interfaces that we are compatible with.
- loop=$age
- while test "$loop" -ne 0; do
- func_arith $current - $loop
- iface=$func_arith_result
- func_arith $loop - 1
- loop=$func_arith_result
- verstring="$verstring:${iface}.0"
- done
-
- # Make executables depend on our current version.
- func_append verstring ":${current}.0"
- ;;
-
- qnx)
- major=".$current"
- versuffix=".$current"
- ;;
-
- sunos)
- major=".$current"
- versuffix=".$current.$revision"
- ;;
-
- windows)
- # Use '-' rather than '.', since we only want one
- # extension on DOS 8.3 filesystems.
- func_arith $current - $age
- major=$func_arith_result
- versuffix="-$major"
- ;;
-
- *)
- func_fatal_configuration "unknown library version type \`$version_type'"
- ;;
- esac
-
- # Clear the version info if we defaulted, and they specified a release.
- if test -z "$vinfo" && test -n "$release"; then
- major=
- case $version_type in
- darwin)
- # we can't check for "0.0" in archive_cmds due to quoting
- # problems, so we reset it completely
- verstring=
- ;;
- *)
- verstring="0.0"
- ;;
- esac
- if test "$need_version" = no; then
- versuffix=
- else
- versuffix=".0.0"
- fi
- fi
-
- # Remove version info from name if versioning should be avoided
- if test "$avoid_version" = yes && test "$need_version" = no; then
- major=
- versuffix=
- verstring=""
- fi
-
- # Check to see if the archive will have undefined symbols.
- if test "$allow_undefined" = yes; then
- if test "$allow_undefined_flag" = unsupported; then
- func_warning "undefined symbols not allowed in $host shared libraries"
- build_libtool_libs=no
- build_old_libs=yes
- fi
- else
- # Don't allow undefined symbols.
- allow_undefined_flag="$no_undefined_flag"
- fi
-
- fi
-
- func_generate_dlsyms "$libname" "$libname" "yes"
- func_append libobjs " $symfileobj"
- test "X$libobjs" = "X " && libobjs=
-
- if test "$opt_mode" != relink; then
- # Remove our outputs, but don't remove object files since they
- # may have been created when compiling PIC objects.
- removelist=
- tempremovelist=`$ECHO "$output_objdir/*"`
- for p in $tempremovelist; do
- case $p in
- *.$objext | *.gcno)
- ;;
- $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
- if test "X$precious_files_regex" != "X"; then
- if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
- then
- continue
- fi
- fi
- func_append removelist " $p"
- ;;
- *) ;;
- esac
- done
- test -n "$removelist" && \
- func_show_eval "${RM}r \$removelist"
- fi
-
- # Now set the variables for building old libraries.
- if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
- func_append oldlibs " $output_objdir/$libname.$libext"
-
- # Transform .lo files to .o files.
- oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP`
- fi
-
- # Eliminate all temporary directories.
- #for path in $notinst_path; do
- # lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"`
- # deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"`
- # dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"`
- #done
-
- if test -n "$xrpath"; then
- # If the user specified any rpath flags, then add them.
- temp_xrpath=
- for libdir in $xrpath; do
- func_replace_sysroot "$libdir"
- func_append temp_xrpath " -R$func_replace_sysroot_result"
- case "$finalize_rpath " in
- *" $libdir "*) ;;
- *) func_append finalize_rpath " $libdir" ;;
- esac
- done
- if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
- dependency_libs="$temp_xrpath $dependency_libs"
- fi
- fi
-
- # Make sure dlfiles contains only unique files that won't be dlpreopened
- old_dlfiles="$dlfiles"
- dlfiles=
- for lib in $old_dlfiles; do
- case " $dlprefiles $dlfiles " in
- *" $lib "*) ;;
- *) func_append dlfiles " $lib" ;;
- esac
- done
-
- # Make sure dlprefiles contains only unique files
- old_dlprefiles="$dlprefiles"
- dlprefiles=
- for lib in $old_dlprefiles; do
- case "$dlprefiles " in
- *" $lib "*) ;;
- *) func_append dlprefiles " $lib" ;;
- esac
- done
-
- if test "$build_libtool_libs" = yes; then
- if test -n "$rpath"; then
- case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*)
- # these systems don't actually have a c library (as such)!
- ;;
- *-*-rhapsody* | *-*-darwin1.[012])
- # Rhapsody C library is in the System framework
- func_append deplibs " System.ltframework"
- ;;
- *-*-netbsd*)
- # Don't link with libc until the a.out ld.so is fixed.
- ;;
- *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
- # Do not include libc due to us having libc/libc_r.
- ;;
- *-*-sco3.2v5* | *-*-sco5v6*)
- # Causes problems with __ctype
- ;;
- *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
- # Compiler inserts libc in the correct place for threads to work
- ;;
- *)
- # Add libc to deplibs on all other systems if necessary.
- if test "$build_libtool_need_lc" = "yes"; then
- func_append deplibs " -lc"
- fi
- ;;
- esac
- fi
-
- # Transform deplibs into only deplibs that can be linked in shared.
- name_save=$name
- libname_save=$libname
- release_save=$release
- versuffix_save=$versuffix
- major_save=$major
- # I'm not sure if I'm treating the release correctly. I think
- # release should show up in the -l (ie -lgmp5) so we don't want to
- # add it in twice. Is that correct?
- release=""
- versuffix=""
- major=""
- newdeplibs=
- droppeddeps=no
- case $deplibs_check_method in
- pass_all)
- # Don't check for shared/static. Everything works.
- # This might be a little naive. We might want to check
- # whether the library exists or not. But this is on
- # osf3 & osf4 and I'm not really sure... Just
- # implementing what was already the behavior.
- newdeplibs=$deplibs
- ;;
- test_compile)
- # This code stresses the "libraries are programs" paradigm to its
- # limits. Maybe even breaks it. We compile a program, linking it
- # against the deplibs as a proxy for the library. Then we can check
- # whether they linked in statically or dynamically with ldd.
- $opt_dry_run || $RM conftest.c
- cat > conftest.c <<EOF
- int main() { return 0; }
-EOF
- $opt_dry_run || $RM conftest
- if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
- ldd_output=`ldd conftest`
- for i in $deplibs; do
- case $i in
- -l*)
- func_stripname -l '' "$i"
- name=$func_stripname_result
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
- case " $predeps $postdeps " in
- *" $i "*)
- func_append newdeplibs " $i"
- i=""
- ;;
- esac
- fi
- if test -n "$i" ; then
- libname=`eval "\\$ECHO \"$libname_spec\""`
- deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
- set dummy $deplib_matches; shift
- deplib_match=$1
- if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
- func_append newdeplibs " $i"
- else
- droppeddeps=yes
- echo
- $ECHO "*** Warning: dynamic linker does not accept needed library $i."
- echo "*** I have the capability to make that library automatically link in when"
- echo "*** you link to this library. But I can only do this if you have a"
- echo "*** shared version of the library, which I believe you do not have"
- echo "*** because a test_compile did reveal that the linker did not use it for"
- echo "*** its dynamic dependency list that programs get resolved with at runtime."
- fi
- fi
- ;;
- *)
- func_append newdeplibs " $i"
- ;;
- esac
- done
- else
- # Error occurred in the first compile. Let's try to salvage
- # the situation: Compile a separate program for each library.
- for i in $deplibs; do
- case $i in
- -l*)
- func_stripname -l '' "$i"
- name=$func_stripname_result
- $opt_dry_run || $RM conftest
- if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
- ldd_output=`ldd conftest`
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
- case " $predeps $postdeps " in
- *" $i "*)
- func_append newdeplibs " $i"
- i=""
- ;;
- esac
- fi
- if test -n "$i" ; then
- libname=`eval "\\$ECHO \"$libname_spec\""`
- deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
- set dummy $deplib_matches; shift
- deplib_match=$1
- if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
- func_append newdeplibs " $i"
- else
- droppeddeps=yes
- echo
- $ECHO "*** Warning: dynamic linker does not accept needed library $i."
- echo "*** I have the capability to make that library automatically link in when"
- echo "*** you link to this library. But I can only do this if you have a"
- echo "*** shared version of the library, which you do not appear to have"
- echo "*** because a test_compile did reveal that the linker did not use this one"
- echo "*** as a dynamic dependency that programs can get resolved with at runtime."
- fi
- fi
- else
- droppeddeps=yes
- echo
- $ECHO "*** Warning! Library $i is needed by this library but I was not able to"
- echo "*** make it link in! You will probably need to install it or some"
- echo "*** library that it depends on before this library will be fully"
- echo "*** functional. Installing it before continuing would be even better."
- fi
- ;;
- *)
- func_append newdeplibs " $i"
- ;;
- esac
- done
- fi
- ;;
- file_magic*)
- set dummy $deplibs_check_method; shift
- file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
- for a_deplib in $deplibs; do
- case $a_deplib in
- -l*)
- func_stripname -l '' "$a_deplib"
- name=$func_stripname_result
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
- case " $predeps $postdeps " in
- *" $a_deplib "*)
- func_append newdeplibs " $a_deplib"
- a_deplib=""
- ;;
- esac
- fi
- if test -n "$a_deplib" ; then
- libname=`eval "\\$ECHO \"$libname_spec\""`
- if test -n "$file_magic_glob"; then
- libnameglob=`func_echo_all "$libname" | $SED -e $file_magic_glob`
- else
- libnameglob=$libname
- fi
- test "$want_nocaseglob" = yes && nocaseglob=`shopt -p nocaseglob`
- for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
- if test "$want_nocaseglob" = yes; then
- shopt -s nocaseglob
- potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
- $nocaseglob
- else
- potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
- fi
- for potent_lib in $potential_libs; do
- # Follow soft links.
- if ls -lLd "$potent_lib" 2>/dev/null |
- $GREP " -> " >/dev/null; then
- continue
- fi
- # The statement above tries to avoid entering an
- # endless loop below, in case of cyclic links.
- # We might still enter an endless loop, since a link
- # loop can be closed while we follow links,
- # but so what?
- potlib="$potent_lib"
- while test -h "$potlib" 2>/dev/null; do
- potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
- case $potliblink in
- [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
- *) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";;
- esac
- done
- if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
- $SED -e 10q |
- $EGREP "$file_magic_regex" > /dev/null; then
- func_append newdeplibs " $a_deplib"
- a_deplib=""
- break 2
- fi
- done
- done
- fi
- if test -n "$a_deplib" ; then
- droppeddeps=yes
- echo
- $ECHO "*** Warning: linker path does not have real file for library $a_deplib."
- echo "*** I have the capability to make that library automatically link in when"
- echo "*** you link to this library. But I can only do this if you have a"
- echo "*** shared version of the library, which you do not appear to have"
- echo "*** because I did check the linker path looking for a file starting"
- if test -z "$potlib" ; then
- $ECHO "*** with $libname but no candidates were found. (...for file magic test)"
- else
- $ECHO "*** with $libname and none of the candidates passed a file format test"
- $ECHO "*** using a file magic. Last file checked: $potlib"
- fi
- fi
- ;;
- *)
- # Add a -L argument.
- func_append newdeplibs " $a_deplib"
- ;;
- esac
- done # Gone through all deplibs.
- ;;
- match_pattern*)
- set dummy $deplibs_check_method; shift
- match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
- for a_deplib in $deplibs; do
- case $a_deplib in
- -l*)
- func_stripname -l '' "$a_deplib"
- name=$func_stripname_result
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
- case " $predeps $postdeps " in
- *" $a_deplib "*)
- func_append newdeplibs " $a_deplib"
- a_deplib=""
- ;;
- esac
- fi
- if test -n "$a_deplib" ; then
- libname=`eval "\\$ECHO \"$libname_spec\""`
- for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
- potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
- for potent_lib in $potential_libs; do
- potlib="$potent_lib" # see symlink-check above in file_magic test
- if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \
- $EGREP "$match_pattern_regex" > /dev/null; then
- func_append newdeplibs " $a_deplib"
- a_deplib=""
- break 2
- fi
- done
- done
- fi
- if test -n "$a_deplib" ; then
- droppeddeps=yes
- echo
- $ECHO "*** Warning: linker path does not have real file for library $a_deplib."
- echo "*** I have the capability to make that library automatically link in when"
- echo "*** you link to this library. But I can only do this if you have a"
- echo "*** shared version of the library, which you do not appear to have"
- echo "*** because I did check the linker path looking for a file starting"
- if test -z "$potlib" ; then
- $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
- else
- $ECHO "*** with $libname and none of the candidates passed a file format test"
- $ECHO "*** using a regex pattern. Last file checked: $potlib"
- fi
- fi
- ;;
- *)
- # Add a -L argument.
- func_append newdeplibs " $a_deplib"
- ;;
- esac
- done # Gone through all deplibs.
- ;;
- none | unknown | *)
- newdeplibs=""
- tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'`
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
- for i in $predeps $postdeps ; do
- # can't use Xsed below, because $i might contain '/'
- tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"`
- done
- fi
- case $tmp_deplibs in
- *[!\ \ ]*)
- echo
- if test "X$deplibs_check_method" = "Xnone"; then
- echo "*** Warning: inter-library dependencies are not supported in this platform."
- else
- echo "*** Warning: inter-library dependencies are not known to be supported."
- fi
- echo "*** All declared inter-library dependencies are being dropped."
- droppeddeps=yes
- ;;
- esac
- ;;
- esac
- versuffix=$versuffix_save
- major=$major_save
- release=$release_save
- libname=$libname_save
- name=$name_save
-
- case $host in
- *-*-rhapsody* | *-*-darwin1.[012])
- # On Rhapsody replace the C library with the System framework
- newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'`
- ;;
- esac
-
- if test "$droppeddeps" = yes; then
- if test "$module" = yes; then
- echo
- echo "*** Warning: libtool could not satisfy all declared inter-library"
- $ECHO "*** dependencies of module $libname. Therefore, libtool will create"
- echo "*** a static module, that should work as long as the dlopening"
- echo "*** application is linked with the -dlopen flag."
- if test -z "$global_symbol_pipe"; then
- echo
- echo "*** However, this would only work if libtool was able to extract symbol"
- echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
- echo "*** not find such a program. So, this module is probably useless."
- echo "*** \`nm' from GNU binutils and a full rebuild may help."
- fi
- if test "$build_old_libs" = no; then
- oldlibs="$output_objdir/$libname.$libext"
- build_libtool_libs=module
- build_old_libs=yes
- else
- build_libtool_libs=no
- fi
- else
- echo "*** The inter-library dependencies that have been dropped here will be"
- echo "*** automatically added whenever a program is linked with this library"
- echo "*** or is declared to -dlopen it."
-
- if test "$allow_undefined" = no; then
- echo
- echo "*** Since this library must not contain undefined symbols,"
- echo "*** because either the platform does not support them or"
- echo "*** it was explicitly requested with -no-undefined,"
- echo "*** libtool will only create a static version of it."
- if test "$build_old_libs" = no; then
- oldlibs="$output_objdir/$libname.$libext"
- build_libtool_libs=module
- build_old_libs=yes
- else
- build_libtool_libs=no
- fi
- fi
- fi
- fi
- # Done checking deplibs!
- deplibs=$newdeplibs
- fi
- # Time to change all our "foo.ltframework" stuff back to "-framework foo"
- case $host in
- *-*-darwin*)
- newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
- new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
- deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
- ;;
- esac
-
- # move library search paths that coincide with paths to not yet
- # installed libraries to the beginning of the library search list
- new_libs=
- for path in $notinst_path; do
- case " $new_libs " in
- *" -L$path/$objdir "*) ;;
- *)
- case " $deplibs " in
- *" -L$path/$objdir "*)
- func_append new_libs " -L$path/$objdir" ;;
- esac
- ;;
- esac
- done
- for deplib in $deplibs; do
- case $deplib in
- -L*)
- case " $new_libs " in
- *" $deplib "*) ;;
- *) func_append new_libs " $deplib" ;;
- esac
- ;;
- *) func_append new_libs " $deplib" ;;
- esac
- done
- deplibs="$new_libs"
-
- # All the library-specific variables (install_libdir is set above).
- library_names=
- old_library=
- dlname=
-
- # Test again, we may have decided not to build it any more
- if test "$build_libtool_libs" = yes; then
- # Remove ${wl} instances when linking with ld.
- # FIXME: should test the right _cmds variable.
- case $archive_cmds in
- *\$LD\ *) wl= ;;
- esac
- if test "$hardcode_into_libs" = yes; then
- # Hardcode the library paths
- hardcode_libdirs=
- dep_rpath=
- rpath="$finalize_rpath"
- test "$opt_mode" != relink && rpath="$compile_rpath$rpath"
- for libdir in $rpath; do
- if test -n "$hardcode_libdir_flag_spec"; then
- if test -n "$hardcode_libdir_separator"; then
- func_replace_sysroot "$libdir"
- libdir=$func_replace_sysroot_result
- if test -z "$hardcode_libdirs"; then
- hardcode_libdirs="$libdir"
- else
- # Just accumulate the unique libdirs.
- case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
- *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
- ;;
- *)
- func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
- ;;
- esac
- fi
- else
- eval flag=\"$hardcode_libdir_flag_spec\"
- func_append dep_rpath " $flag"
- fi
- elif test -n "$runpath_var"; then
- case "$perm_rpath " in
- *" $libdir "*) ;;
- *) func_append perm_rpath " $libdir" ;;
- esac
- fi
- done
- # Substitute the hardcoded libdirs into the rpath.
- if test -n "$hardcode_libdir_separator" &&
- test -n "$hardcode_libdirs"; then
- libdir="$hardcode_libdirs"
- eval "dep_rpath=\"$hardcode_libdir_flag_spec\""
- fi
- if test -n "$runpath_var" && test -n "$perm_rpath"; then
- # We should set the runpath_var.
- rpath=
- for dir in $perm_rpath; do
- func_append rpath "$dir:"
- done
- eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
- fi
- test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
- fi
-
- shlibpath="$finalize_shlibpath"
- test "$opt_mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
- if test -n "$shlibpath"; then
- eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
- fi
-
- # Get the real and link names of the library.
- eval shared_ext=\"$shrext_cmds\"
- eval library_names=\"$library_names_spec\"
- set dummy $library_names
- shift
- realname="$1"
- shift
-
- if test -n "$soname_spec"; then
- eval soname=\"$soname_spec\"
- else
- soname="$realname"
- fi
- if test -z "$dlname"; then
- dlname=$soname
- fi
-
- lib="$output_objdir/$realname"
- linknames=
- for link
- do
- func_append linknames " $link"
- done
-
- # Use standard objects if they are pic
- test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP`
- test "X$libobjs" = "X " && libobjs=
-
- delfiles=
- if test -n "$export_symbols" && test -n "$include_expsyms"; then
- $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
- export_symbols="$output_objdir/$libname.uexp"
- func_append delfiles " $export_symbols"
- fi
-
- orig_export_symbols=
- case $host_os in
- cygwin* | mingw* | cegcc*)
- if test -n "$export_symbols" && test -z "$export_symbols_regex"; then
- # exporting using user supplied symfile
- if test "x`$SED 1q $export_symbols`" != xEXPORTS; then
- # and it's NOT already a .def file. Must figure out
- # which of the given symbols are data symbols and tag
- # them as such. So, trigger use of export_symbols_cmds.
- # export_symbols gets reassigned inside the "prepare
- # the list of exported symbols" if statement, so the
- # include_expsyms logic still works.
- orig_export_symbols="$export_symbols"
- export_symbols=
- always_export_symbols=yes
- fi
- fi
- ;;
- esac
-
- # Prepare the list of exported symbols
- if test -z "$export_symbols"; then
- if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
- func_verbose "generating symbol list for \`$libname.la'"
- export_symbols="$output_objdir/$libname.exp"
- $opt_dry_run || $RM $export_symbols
- cmds=$export_symbols_cmds
- save_ifs="$IFS"; IFS='~'
- for cmd1 in $cmds; do
- IFS="$save_ifs"
- # Take the normal branch if the nm_file_list_spec branch
- # doesn't work or if tool conversion is not needed.
- case $nm_file_list_spec~$to_tool_file_cmd in
- *~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*)
- try_normal_branch=yes
- eval cmd=\"$cmd1\"
- func_len " $cmd"
- len=$func_len_result
- ;;
- *)
- try_normal_branch=no
- ;;
- esac
- if test "$try_normal_branch" = yes \
- && { test "$len" -lt "$max_cmd_len" \
- || test "$max_cmd_len" -le -1; }
- then
- func_show_eval "$cmd" 'exit $?'
- skipped_export=false
- elif test -n "$nm_file_list_spec"; then
- func_basename "$output"
- output_la=$func_basename_result
- save_libobjs=$libobjs
- save_output=$output
- output=${output_objdir}/${output_la}.nm
- func_to_tool_file "$output"
- libobjs=$nm_file_list_spec$func_to_tool_file_result
- func_append delfiles " $output"
- func_verbose "creating $NM input file list: $output"
- for obj in $save_libobjs; do
- func_to_tool_file "$obj"
- $ECHO "$func_to_tool_file_result"
- done > "$output"
- eval cmd=\"$cmd1\"
- func_show_eval "$cmd" 'exit $?'
- output=$save_output
- libobjs=$save_libobjs
- skipped_export=false
- else
- # The command line is too long to execute in one step.
- func_verbose "using reloadable object file for export list..."
- skipped_export=:
- # Break out early, otherwise skipped_export may be
- # set to false by a later but shorter cmd.
- break
- fi
- done
- IFS="$save_ifs"
- if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then
- func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
- func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
- fi
- fi
- fi
-
- if test -n "$export_symbols" && test -n "$include_expsyms"; then
- tmp_export_symbols="$export_symbols"
- test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
- $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
- fi
-
- if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then
- # The given exports_symbols file has to be filtered, so filter it.
- func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
- # FIXME: $output_objdir/$libname.filter potentially contains lots of
- # 's' commands which not all seds can handle. GNU sed should be fine
- # though. Also, the filter scales superlinearly with the number of
- # global variables. join(1) would be nice here, but unfortunately
- # isn't a blessed tool.
- $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
- func_append delfiles " $export_symbols $output_objdir/$libname.filter"
- export_symbols=$output_objdir/$libname.def
- $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
- fi
-
- tmp_deplibs=
- for test_deplib in $deplibs; do
- case " $convenience " in
- *" $test_deplib "*) ;;
- *)
- func_append tmp_deplibs " $test_deplib"
- ;;
- esac
- done
- deplibs="$tmp_deplibs"
-
- if test -n "$convenience"; then
- if test -n "$whole_archive_flag_spec" &&
- test "$compiler_needs_object" = yes &&
- test -z "$libobjs"; then
- # extract the archives, so we have objects to list.
- # TODO: could optimize this to just extract one archive.
- whole_archive_flag_spec=
- fi
- if test -n "$whole_archive_flag_spec"; then
- save_libobjs=$libobjs
- eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
- test "X$libobjs" = "X " && libobjs=
- else
- gentop="$output_objdir/${outputname}x"
- func_append generated " $gentop"
-
- func_extract_archives $gentop $convenience
- func_append libobjs " $func_extract_archives_result"
- test "X$libobjs" = "X " && libobjs=
- fi
- fi
-
- if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
- eval flag=\"$thread_safe_flag_spec\"
- func_append linker_flags " $flag"
- fi
-
- # Make a backup of the uninstalled library when relinking
- if test "$opt_mode" = relink; then
- $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?
- fi
-
- # Do each of the archive commands.
- if test "$module" = yes && test -n "$module_cmds" ; then
- if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
- eval test_cmds=\"$module_expsym_cmds\"
- cmds=$module_expsym_cmds
- else
- eval test_cmds=\"$module_cmds\"
- cmds=$module_cmds
- fi
- else
- if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
- eval test_cmds=\"$archive_expsym_cmds\"
- cmds=$archive_expsym_cmds
- else
- eval test_cmds=\"$archive_cmds\"
- cmds=$archive_cmds
- fi
- fi
-
- if test "X$skipped_export" != "X:" &&
- func_len " $test_cmds" &&
- len=$func_len_result &&
- test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
- :
- else
- # The command line is too long to link in one step, link piecewise
- # or, if using GNU ld and skipped_export is not :, use a linker
- # script.
-
- # Save the value of $output and $libobjs because we want to
- # use them later. If we have whole_archive_flag_spec, we
- # want to use save_libobjs as it was before
- # whole_archive_flag_spec was expanded, because we can't
- # assume the linker understands whole_archive_flag_spec.
- # This may have to be revisited, in case too many
- # convenience libraries get linked in and end up exceeding
- # the spec.
- if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
- save_libobjs=$libobjs
- fi
- save_output=$output
- func_basename "$output"
- output_la=$func_basename_result
-
- # Clear the reloadable object creation command queue and
- # initialize k to one.
- test_cmds=
- concat_cmds=
- objlist=
- last_robj=
- k=1
-
- if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then
- output=${output_objdir}/${output_la}.lnkscript
- func_verbose "creating GNU ld script: $output"
- echo 'INPUT (' > $output
- for obj in $save_libobjs
- do
- func_to_tool_file "$obj"
- $ECHO "$func_to_tool_file_result" >> $output
- done
- echo ')' >> $output
- func_append delfiles " $output"
- func_to_tool_file "$output"
- output=$func_to_tool_file_result
- elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then
- output=${output_objdir}/${output_la}.lnk
- func_verbose "creating linker input file list: $output"
- : > $output
- set x $save_libobjs
- shift
- firstobj=
- if test "$compiler_needs_object" = yes; then
- firstobj="$1 "
- shift
- fi
- for obj
- do
- func_to_tool_file "$obj"
- $ECHO "$func_to_tool_file_result" >> $output
- done
- func_append delfiles " $output"
- func_to_tool_file "$output"
- output=$firstobj\"$file_list_spec$func_to_tool_file_result\"
- else
- if test -n "$save_libobjs"; then
- func_verbose "creating reloadable object files..."
- output=$output_objdir/$output_la-${k}.$objext
- eval test_cmds=\"$reload_cmds\"
- func_len " $test_cmds"
- len0=$func_len_result
- len=$len0
-
- # Loop over the list of objects to be linked.
- for obj in $save_libobjs
- do
- func_len " $obj"
- func_arith $len + $func_len_result
- len=$func_arith_result
- if test "X$objlist" = X ||
- test "$len" -lt "$max_cmd_len"; then
- func_append objlist " $obj"
- else
- # The command $test_cmds is almost too long, add a
- # command to the queue.
- if test "$k" -eq 1 ; then
- # The first file doesn't have a previous command to add.
- reload_objs=$objlist
- eval concat_cmds=\"$reload_cmds\"
- else
- # All subsequent reloadable object files will link in
- # the last one created.
- reload_objs="$objlist $last_robj"
- eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\"
- fi
- last_robj=$output_objdir/$output_la-${k}.$objext
- func_arith $k + 1
- k=$func_arith_result
- output=$output_objdir/$output_la-${k}.$objext
- objlist=" $obj"
- func_len " $last_robj"
- func_arith $len0 + $func_len_result
- len=$func_arith_result
- fi
- done
- # Handle the remaining objects by creating one last
- # reloadable object file. All subsequent reloadable object
- # files will link in the last one created.
- test -z "$concat_cmds" || concat_cmds=$concat_cmds~
- reload_objs="$objlist $last_robj"
- eval concat_cmds=\"\${concat_cmds}$reload_cmds\"
- if test -n "$last_robj"; then
- eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\"
- fi
- func_append delfiles " $output"
-
- else
- output=
- fi
-
- if ${skipped_export-false}; then
- func_verbose "generating symbol list for \`$libname.la'"
- export_symbols="$output_objdir/$libname.exp"
- $opt_dry_run || $RM $export_symbols
- libobjs=$output
- # Append the command to create the export file.
- test -z "$concat_cmds" || concat_cmds=$concat_cmds~
- eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\"
- if test -n "$last_robj"; then
- eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
- fi
- fi
-
- test -n "$save_libobjs" &&
- func_verbose "creating a temporary reloadable object file: $output"
-
- # Loop through the commands generated above and execute them.
- save_ifs="$IFS"; IFS='~'
- for cmd in $concat_cmds; do
- IFS="$save_ifs"
- $opt_silent || {
- func_quote_for_expand "$cmd"
- eval "func_echo $func_quote_for_expand_result"
- }
- $opt_dry_run || eval "$cmd" || {
- lt_exit=$?
-
- # Restore the uninstalled library and exit
- if test "$opt_mode" = relink; then
- ( cd "$output_objdir" && \
- $RM "${realname}T" && \
- $MV "${realname}U" "$realname" )
- fi
-
- exit $lt_exit
- }
- done
- IFS="$save_ifs"
-
- if test -n "$export_symbols_regex" && ${skipped_export-false}; then
- func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
- func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
- fi
- fi
-
- if ${skipped_export-false}; then
- if test -n "$export_symbols" && test -n "$include_expsyms"; then
- tmp_export_symbols="$export_symbols"
- test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
- $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
- fi
-
- if test -n "$orig_export_symbols"; then
- # The given exports_symbols file has to be filtered, so filter it.
- func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
- # FIXME: $output_objdir/$libname.filter potentially contains lots of
- # 's' commands which not all seds can handle. GNU sed should be fine
- # though. Also, the filter scales superlinearly with the number of
- # global variables. join(1) would be nice here, but unfortunately
- # isn't a blessed tool.
- $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
- func_append delfiles " $export_symbols $output_objdir/$libname.filter"
- export_symbols=$output_objdir/$libname.def
- $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
- fi
- fi
-
- libobjs=$output
- # Restore the value of output.
- output=$save_output
-
- if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
- eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
- test "X$libobjs" = "X " && libobjs=
- fi
- # Expand the library linking commands again to reset the
- # value of $libobjs for piecewise linking.
-
- # Do each of the archive commands.
- if test "$module" = yes && test -n "$module_cmds" ; then
- if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
- cmds=$module_expsym_cmds
- else
- cmds=$module_cmds
- fi
- else
- if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
- cmds=$archive_expsym_cmds
- else
- cmds=$archive_cmds
- fi
- fi
- fi
-
- if test -n "$delfiles"; then
- # Append the command to remove temporary files to $cmds.
- eval cmds=\"\$cmds~\$RM $delfiles\"
- fi
-
- # Add any objects from preloaded convenience libraries
- if test -n "$dlprefiles"; then
- gentop="$output_objdir/${outputname}x"
- func_append generated " $gentop"
-
- func_extract_archives $gentop $dlprefiles
- func_append libobjs " $func_extract_archives_result"
- test "X$libobjs" = "X " && libobjs=
- fi
-
- save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- $opt_silent || {
- func_quote_for_expand "$cmd"
- eval "func_echo $func_quote_for_expand_result"
- }
- $opt_dry_run || eval "$cmd" || {
- lt_exit=$?
-
- # Restore the uninstalled library and exit
- if test "$opt_mode" = relink; then
- ( cd "$output_objdir" && \
- $RM "${realname}T" && \
- $MV "${realname}U" "$realname" )
- fi
-
- exit $lt_exit
- }
- done
- IFS="$save_ifs"
-
- # Restore the uninstalled library and exit
- if test "$opt_mode" = relink; then
- $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?
-
- if test -n "$convenience"; then
- if test -z "$whole_archive_flag_spec"; then
- func_show_eval '${RM}r "$gentop"'
- fi
- fi
-
- exit $EXIT_SUCCESS
- fi
-
- # Create links to the real library.
- for linkname in $linknames; do
- if test "$realname" != "$linkname"; then
- func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?'
- fi
- done
-
- # If -module or -export-dynamic was specified, set the dlname.
- if test "$module" = yes || test "$export_dynamic" = yes; then
- # On all known operating systems, these are identical.
- dlname="$soname"
- fi
- fi
- ;;
-
- obj)
- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
- func_warning "\`-dlopen' is ignored for objects"
- fi
-
- case " $deplibs" in
- *\ -l* | *\ -L*)
- func_warning "\`-l' and \`-L' are ignored for objects" ;;
- esac
-
- test -n "$rpath" && \
- func_warning "\`-rpath' is ignored for objects"
-
- test -n "$xrpath" && \
- func_warning "\`-R' is ignored for objects"
-
- test -n "$vinfo" && \
- func_warning "\`-version-info' is ignored for objects"
-
- test -n "$release" && \
- func_warning "\`-release' is ignored for objects"
-
- case $output in
- *.lo)
- test -n "$objs$old_deplibs" && \
- func_fatal_error "cannot build library object \`$output' from non-libtool objects"
-
- libobj=$output
- func_lo2o "$libobj"
- obj=$func_lo2o_result
- ;;
- *)
- libobj=
- obj="$output"
- ;;
- esac
-
- # Delete the old objects.
- $opt_dry_run || $RM $obj $libobj
-
- # Objects from convenience libraries. This assumes
- # single-version convenience libraries. Whenever we create
- # different ones for PIC/non-PIC, this we'll have to duplicate
- # the extraction.
- reload_conv_objs=
- gentop=
- # reload_cmds runs $LD directly, so let us get rid of
- # -Wl from whole_archive_flag_spec and hope we can get by with
- # turning comma into space..
- wl=
-
- if test -n "$convenience"; then
- if test -n "$whole_archive_flag_spec"; then
- eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
- reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'`
- else
- gentop="$output_objdir/${obj}x"
- func_append generated " $gentop"
-
- func_extract_archives $gentop $convenience
- reload_conv_objs="$reload_objs $func_extract_archives_result"
- fi
- fi
-
- # If we're not building shared, we need to use non_pic_objs
- test "$build_libtool_libs" != yes && libobjs="$non_pic_objects"
-
- # Create the old-style object.
- reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
-
- output="$obj"
- func_execute_cmds "$reload_cmds" 'exit $?'
-
- # Exit if we aren't doing a library object file.
- if test -z "$libobj"; then
- if test -n "$gentop"; then
- func_show_eval '${RM}r "$gentop"'
- fi
-
- exit $EXIT_SUCCESS
- fi
-
- if test "$build_libtool_libs" != yes; then
- if test -n "$gentop"; then
- func_show_eval '${RM}r "$gentop"'
- fi
-
- # Create an invalid libtool object if no PIC, so that we don't
- # accidentally link it into a program.
- # $show "echo timestamp > $libobj"
- # $opt_dry_run || eval "echo timestamp > $libobj" || exit $?
- exit $EXIT_SUCCESS
- fi
-
- if test -n "$pic_flag" || test "$pic_mode" != default; then
- # Only do commands if we really have different PIC objects.
- reload_objs="$libobjs $reload_conv_objs"
- output="$libobj"
- func_execute_cmds "$reload_cmds" 'exit $?'
- fi
-
- if test -n "$gentop"; then
- func_show_eval '${RM}r "$gentop"'
- fi
-
- exit $EXIT_SUCCESS
- ;;
-
- prog)
- case $host in
- *cygwin*) func_stripname '' '.exe' "$output"
- output=$func_stripname_result.exe;;
- esac
- test -n "$vinfo" && \
- func_warning "\`-version-info' is ignored for programs"
-
- test -n "$release" && \
- func_warning "\`-release' is ignored for programs"
-
- test "$preload" = yes \
- && test "$dlopen_support" = unknown \
- && test "$dlopen_self" = unknown \
- && test "$dlopen_self_static" = unknown && \
- func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support."
-
- case $host in
- *-*-rhapsody* | *-*-darwin1.[012])
- # On Rhapsody replace the C library is the System framework
- compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'`
- finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'`
- ;;
- esac
-
- case $host in
- *-*-darwin*)
- # Don't allow lazy linking, it breaks C++ global constructors
- # But is supposedly fixed on 10.4 or later (yay!).
- if test "$tagname" = CXX ; then
- case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
- 10.[0123])
- func_append compile_command " ${wl}-bind_at_load"
- func_append finalize_command " ${wl}-bind_at_load"
- ;;
- esac
- fi
- # Time to change all our "foo.ltframework" stuff back to "-framework foo"
- compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
- finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
- ;;
- esac
-
-
- # move library search paths that coincide with paths to not yet
- # installed libraries to the beginning of the library search list
- new_libs=
- for path in $notinst_path; do
- case " $new_libs " in
- *" -L$path/$objdir "*) ;;
- *)
- case " $compile_deplibs " in
- *" -L$path/$objdir "*)
- func_append new_libs " -L$path/$objdir" ;;
- esac
- ;;
- esac
- done
- for deplib in $compile_deplibs; do
- case $deplib in
- -L*)
- case " $new_libs " in
- *" $deplib "*) ;;
- *) func_append new_libs " $deplib" ;;
- esac
- ;;
- *) func_append new_libs " $deplib" ;;
- esac
- done
- compile_deplibs="$new_libs"
-
-
- func_append compile_command " $compile_deplibs"
- func_append finalize_command " $finalize_deplibs"
-
- if test -n "$rpath$xrpath"; then
- # If the user specified any rpath flags, then add them.
- for libdir in $rpath $xrpath; do
- # This is the magic to use -rpath.
- case "$finalize_rpath " in
- *" $libdir "*) ;;
- *) func_append finalize_rpath " $libdir" ;;
- esac
- done
- fi
-
- # Now hardcode the library paths
- rpath=
- hardcode_libdirs=
- for libdir in $compile_rpath $finalize_rpath; do
- if test -n "$hardcode_libdir_flag_spec"; then
- if test -n "$hardcode_libdir_separator"; then
- if test -z "$hardcode_libdirs"; then
- hardcode_libdirs="$libdir"
- else
- # Just accumulate the unique libdirs.
- case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
- *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
- ;;
- *)
- func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
- ;;
- esac
- fi
- else
- eval flag=\"$hardcode_libdir_flag_spec\"
- func_append rpath " $flag"
- fi
- elif test -n "$runpath_var"; then
- case "$perm_rpath " in
- *" $libdir "*) ;;
- *) func_append perm_rpath " $libdir" ;;
- esac
- fi
- case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
- testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'`
- case :$dllsearchpath: in
- *":$libdir:"*) ;;
- ::) dllsearchpath=$libdir;;
- *) func_append dllsearchpath ":$libdir";;
- esac
- case :$dllsearchpath: in
- *":$testbindir:"*) ;;
- ::) dllsearchpath=$testbindir;;
- *) func_append dllsearchpath ":$testbindir";;
- esac
- ;;
- esac
- done
- # Substitute the hardcoded libdirs into the rpath.
- if test -n "$hardcode_libdir_separator" &&
- test -n "$hardcode_libdirs"; then
- libdir="$hardcode_libdirs"
- eval rpath=\" $hardcode_libdir_flag_spec\"
- fi
- compile_rpath="$rpath"
-
- rpath=
- hardcode_libdirs=
- for libdir in $finalize_rpath; do
- if test -n "$hardcode_libdir_flag_spec"; then
- if test -n "$hardcode_libdir_separator"; then
- if test -z "$hardcode_libdirs"; then
- hardcode_libdirs="$libdir"
- else
- # Just accumulate the unique libdirs.
- case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
- *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
- ;;
- *)
- func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
- ;;
- esac
- fi
- else
- eval flag=\"$hardcode_libdir_flag_spec\"
- func_append rpath " $flag"
- fi
- elif test -n "$runpath_var"; then
- case "$finalize_perm_rpath " in
- *" $libdir "*) ;;
- *) func_append finalize_perm_rpath " $libdir" ;;
- esac
- fi
- done
- # Substitute the hardcoded libdirs into the rpath.
- if test -n "$hardcode_libdir_separator" &&
- test -n "$hardcode_libdirs"; then
- libdir="$hardcode_libdirs"
- eval rpath=\" $hardcode_libdir_flag_spec\"
- fi
- finalize_rpath="$rpath"
-
- if test -n "$libobjs" && test "$build_old_libs" = yes; then
- # Transform all the library objects into standard objects.
- compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
- finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
- fi
-
- func_generate_dlsyms "$outputname" "@PROGRAM@" "no"
-
- # template prelinking step
- if test -n "$prelink_cmds"; then
- func_execute_cmds "$prelink_cmds" 'exit $?'
- fi
-
- wrappers_required=yes
- case $host in
- *cegcc* | *mingw32ce*)
- # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway.
- wrappers_required=no
- ;;
- *cygwin* | *mingw* )
- if test "$build_libtool_libs" != yes; then
- wrappers_required=no
- fi
- ;;
- *)
- if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
- wrappers_required=no
- fi
- ;;
- esac
- if test "$wrappers_required" = no; then
- # Replace the output file specification.
- compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
- link_command="$compile_command$compile_rpath"
-
- # We have no uninstalled library dependencies, so finalize right now.
- exit_status=0
- func_show_eval "$link_command" 'exit_status=$?'
-
- if test -n "$postlink_cmds"; then
- func_to_tool_file "$output"
- postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
- func_execute_cmds "$postlink_cmds" 'exit $?'
- fi
-
- # Delete the generated files.
- if test -f "$output_objdir/${outputname}S.${objext}"; then
- func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"'
- fi
-
- exit $exit_status
- fi
-
- if test -n "$compile_shlibpath$finalize_shlibpath"; then
- compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
- fi
- if test -n "$finalize_shlibpath"; then
- finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
- fi
-
- compile_var=
- finalize_var=
- if test -n "$runpath_var"; then
- if test -n "$perm_rpath"; then
- # We should set the runpath_var.
- rpath=
- for dir in $perm_rpath; do
- func_append rpath "$dir:"
- done
- compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
- fi
- if test -n "$finalize_perm_rpath"; then
- # We should set the runpath_var.
- rpath=
- for dir in $finalize_perm_rpath; do
- func_append rpath "$dir:"
- done
- finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
- fi
- fi
-
- if test "$no_install" = yes; then
- # We don't need to create a wrapper script.
- link_command="$compile_var$compile_command$compile_rpath"
- # Replace the output file specification.
- link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
- # Delete the old output file.
- $opt_dry_run || $RM $output
- # Link the executable and exit
- func_show_eval "$link_command" 'exit $?'
-
- if test -n "$postlink_cmds"; then
- func_to_tool_file "$output"
- postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
- func_execute_cmds "$postlink_cmds" 'exit $?'
- fi
-
- exit $EXIT_SUCCESS
- fi
-
- if test "$hardcode_action" = relink; then
- # Fast installation is not supported
- link_command="$compile_var$compile_command$compile_rpath"
- relink_command="$finalize_var$finalize_command$finalize_rpath"
-
- func_warning "this platform does not like uninstalled shared libraries"
- func_warning "\`$output' will be relinked during installation"
- else
- if test "$fast_install" != no; then
- link_command="$finalize_var$compile_command$finalize_rpath"
- if test "$fast_install" = yes; then
- relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'`
- else
- # fast_install is set to needless
- relink_command=
- fi
- else
- link_command="$compile_var$compile_command$compile_rpath"
- relink_command="$finalize_var$finalize_command$finalize_rpath"
- fi
- fi
-
- # Replace the output file specification.
- link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
-
- # Delete the old output files.
- $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname
-
- func_show_eval "$link_command" 'exit $?'
-
- if test -n "$postlink_cmds"; then
- func_to_tool_file "$output_objdir/$outputname"
- postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
- func_execute_cmds "$postlink_cmds" 'exit $?'
- fi
-
- # Now create the wrapper script.
- func_verbose "creating $output"
-
- # Quote the relink command for shipping.
- if test -n "$relink_command"; then
- # Preserve any variables that may affect compiler behavior
- for var in $variables_saved_for_relink; do
- if eval test -z \"\${$var+set}\"; then
- relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
- elif eval var_value=\$$var; test -z "$var_value"; then
- relink_command="$var=; export $var; $relink_command"
- else
- func_quote_for_eval "$var_value"
- relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
- fi
- done
- relink_command="(cd `pwd`; $relink_command)"
- relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
- fi
-
- # Only actually do things if not in dry run mode.
- $opt_dry_run || {
- # win32 will think the script is a binary if it has
- # a .exe suffix, so we strip it off here.
- case $output in
- *.exe) func_stripname '' '.exe' "$output"
- output=$func_stripname_result ;;
- esac
- # test for cygwin because mv fails w/o .exe extensions
- case $host in
- *cygwin*)
- exeext=.exe
- func_stripname '' '.exe' "$outputname"
- outputname=$func_stripname_result ;;
- *) exeext= ;;
- esac
- case $host in
- *cygwin* | *mingw* )
- func_dirname_and_basename "$output" "" "."
- output_name=$func_basename_result
- output_path=$func_dirname_result
- cwrappersource="$output_path/$objdir/lt-$output_name.c"
- cwrapper="$output_path/$output_name.exe"
- $RM $cwrappersource $cwrapper
- trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
-
- func_emit_cwrapperexe_src > $cwrappersource
-
- # The wrapper executable is built using the $host compiler,
- # because it contains $host paths and files. If cross-
- # compiling, it, like the target executable, must be
- # executed on the $host or under an emulation environment.
- $opt_dry_run || {
- $LTCC $LTCFLAGS -o $cwrapper $cwrappersource
- $STRIP $cwrapper
- }
-
- # Now, create the wrapper script for func_source use:
- func_ltwrapper_scriptname $cwrapper
- $RM $func_ltwrapper_scriptname_result
- trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15
- $opt_dry_run || {
- # note: this script will not be executed, so do not chmod.
- if test "x$build" = "x$host" ; then
- $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result
- else
- func_emit_wrapper no > $func_ltwrapper_scriptname_result
- fi
- }
- ;;
- * )
- $RM $output
- trap "$RM $output; exit $EXIT_FAILURE" 1 2 15
-
- func_emit_wrapper no > $output
- chmod +x $output
- ;;
- esac
- }
- exit $EXIT_SUCCESS
- ;;
- esac
-
- # See if we need to build an old-fashioned archive.
- for oldlib in $oldlibs; do
-
- if test "$build_libtool_libs" = convenience; then
- oldobjs="$libobjs_save $symfileobj"
- addlibs="$convenience"
- build_libtool_libs=no
- else
- if test "$build_libtool_libs" = module; then
- oldobjs="$libobjs_save"
- build_libtool_libs=no
- else
- oldobjs="$old_deplibs $non_pic_objects"
- if test "$preload" = yes && test -f "$symfileobj"; then
- func_append oldobjs " $symfileobj"
- fi
- fi
- addlibs="$old_convenience"
- fi
-
- if test -n "$addlibs"; then
- gentop="$output_objdir/${outputname}x"
- func_append generated " $gentop"
-
- func_extract_archives $gentop $addlibs
- func_append oldobjs " $func_extract_archives_result"
- fi
-
- # Do each command in the archive commands.
- if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
- cmds=$old_archive_from_new_cmds
- else
-
- # Add any objects from preloaded convenience libraries
- if test -n "$dlprefiles"; then
- gentop="$output_objdir/${outputname}x"
- func_append generated " $gentop"
-
- func_extract_archives $gentop $dlprefiles
- func_append oldobjs " $func_extract_archives_result"
- fi
-
- # POSIX demands no paths to be encoded in archives. We have
- # to avoid creating archives with duplicate basenames if we
- # might have to extract them afterwards, e.g., when creating a
- # static archive out of a convenience library, or when linking
- # the entirety of a libtool archive into another (currently
- # not supported by libtool).
- if (for obj in $oldobjs
- do
- func_basename "$obj"
- $ECHO "$func_basename_result"
- done | sort | sort -uc >/dev/null 2>&1); then
- :
- else
- echo "copying selected object files to avoid basename conflicts..."
- gentop="$output_objdir/${outputname}x"
- func_append generated " $gentop"
- func_mkdir_p "$gentop"
- save_oldobjs=$oldobjs
- oldobjs=
- counter=1
- for obj in $save_oldobjs
- do
- func_basename "$obj"
- objbase="$func_basename_result"
- case " $oldobjs " in
- " ") oldobjs=$obj ;;
- *[\ /]"$objbase "*)
- while :; do
- # Make sure we don't pick an alternate name that also
- # overlaps.
- newobj=lt$counter-$objbase
- func_arith $counter + 1
- counter=$func_arith_result
- case " $oldobjs " in
- *[\ /]"$newobj "*) ;;
- *) if test ! -f "$gentop/$newobj"; then break; fi ;;
- esac
- done
- func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
- func_append oldobjs " $gentop/$newobj"
- ;;
- *) func_append oldobjs " $obj" ;;
- esac
- done
- fi
- func_to_tool_file "$oldlib" func_convert_file_msys_to_w32
- tool_oldlib=$func_to_tool_file_result
- eval cmds=\"$old_archive_cmds\"
-
- func_len " $cmds"
- len=$func_len_result
- if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
- cmds=$old_archive_cmds
- elif test -n "$archiver_list_spec"; then
- func_verbose "using command file archive linking..."
- for obj in $oldobjs
- do
- func_to_tool_file "$obj"
- $ECHO "$func_to_tool_file_result"
- done > $output_objdir/$libname.libcmd
- func_to_tool_file "$output_objdir/$libname.libcmd"
- oldobjs=" $archiver_list_spec$func_to_tool_file_result"
- cmds=$old_archive_cmds
- else
- # the command line is too long to link in one step, link in parts
- func_verbose "using piecewise archive linking..."
- save_RANLIB=$RANLIB
- RANLIB=:
- objlist=
- concat_cmds=
- save_oldobjs=$oldobjs
- oldobjs=
- # Is there a better way of finding the last object in the list?
- for obj in $save_oldobjs
- do
- last_oldobj=$obj
- done
- eval test_cmds=\"$old_archive_cmds\"
- func_len " $test_cmds"
- len0=$func_len_result
- len=$len0
- for obj in $save_oldobjs
- do
- func_len " $obj"
- func_arith $len + $func_len_result
- len=$func_arith_result
- func_append objlist " $obj"
- if test "$len" -lt "$max_cmd_len"; then
- :
- else
- # the above command should be used before it gets too long
- oldobjs=$objlist
- if test "$obj" = "$last_oldobj" ; then
- RANLIB=$save_RANLIB
- fi
- test -z "$concat_cmds" || concat_cmds=$concat_cmds~
- eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
- objlist=
- len=$len0
- fi
- done
- RANLIB=$save_RANLIB
- oldobjs=$objlist
- if test "X$oldobjs" = "X" ; then
- eval cmds=\"\$concat_cmds\"
- else
- eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
- fi
- fi
- fi
- func_execute_cmds "$cmds" 'exit $?'
- done
-
- test -n "$generated" && \
- func_show_eval "${RM}r$generated"
-
- # Now create the libtool archive.
- case $output in
- *.la)
- old_library=
- test "$build_old_libs" = yes && old_library="$libname.$libext"
- func_verbose "creating $output"
-
- # Preserve any variables that may affect compiler behavior
- for var in $variables_saved_for_relink; do
- if eval test -z \"\${$var+set}\"; then
- relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
- elif eval var_value=\$$var; test -z "$var_value"; then
- relink_command="$var=; export $var; $relink_command"
- else
- func_quote_for_eval "$var_value"
- relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
- fi
- done
- # Quote the link command for shipping.
- relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
- relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
- if test "$hardcode_automatic" = yes ; then
- relink_command=
- fi
-
- # Only create the output if not a dry run.
- $opt_dry_run || {
- for installed in no yes; do
- if test "$installed" = yes; then
- if test -z "$install_libdir"; then
- break
- fi
- output="$output_objdir/$outputname"i
- # Replace all uninstalled libtool libraries with the installed ones
- newdependency_libs=
- for deplib in $dependency_libs; do
- case $deplib in
- *.la)
- func_basename "$deplib"
- name="$func_basename_result"
- func_resolve_sysroot "$deplib"
- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result`
- test -z "$libdir" && \
- func_fatal_error "\`$deplib' is not a valid libtool archive"
- func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name"
- ;;
- -L*)
- func_stripname -L '' "$deplib"
- func_replace_sysroot "$func_stripname_result"
- func_append newdependency_libs " -L$func_replace_sysroot_result"
- ;;
- -R*)
- func_stripname -R '' "$deplib"
- func_replace_sysroot "$func_stripname_result"
- func_append newdependency_libs " -R$func_replace_sysroot_result"
- ;;
- *) func_append newdependency_libs " $deplib" ;;
- esac
- done
- dependency_libs="$newdependency_libs"
- newdlfiles=
-
- for lib in $dlfiles; do
- case $lib in
- *.la)
- func_basename "$lib"
- name="$func_basename_result"
- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
- test -z "$libdir" && \
- func_fatal_error "\`$lib' is not a valid libtool archive"
- func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name"
- ;;
- *) func_append newdlfiles " $lib" ;;
- esac
- done
- dlfiles="$newdlfiles"
- newdlprefiles=
- for lib in $dlprefiles; do
- case $lib in
- *.la)
- # Only pass preopened files to the pseudo-archive (for
- # eventual linking with the app. that links it) if we
- # didn't already link the preopened objects directly into
- # the library:
- func_basename "$lib"
- name="$func_basename_result"
- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
- test -z "$libdir" && \
- func_fatal_error "\`$lib' is not a valid libtool archive"
- func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name"
- ;;
- esac
- done
- dlprefiles="$newdlprefiles"
- else
- newdlfiles=
- for lib in $dlfiles; do
- case $lib in
- [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
- *) abs=`pwd`"/$lib" ;;
- esac
- func_append newdlfiles " $abs"
- done
- dlfiles="$newdlfiles"
- newdlprefiles=
- for lib in $dlprefiles; do
- case $lib in
- [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
- *) abs=`pwd`"/$lib" ;;
- esac
- func_append newdlprefiles " $abs"
- done
- dlprefiles="$newdlprefiles"
- fi
- $RM $output
- # place dlname in correct position for cygwin
- # In fact, it would be nice if we could use this code for all target
- # systems that can't hard-code library paths into their executables
- # and that have no shared library path variable independent of PATH,
- # but it turns out we can't easily determine that from inspecting
- # libtool variables, so we have to hard-code the OSs to which it
- # applies here; at the moment, that means platforms that use the PE
- # object format with DLL files. See the long comment at the top of
- # tests/bindir.at for full details.
- tdlname=$dlname
- case $host,$output,$installed,$module,$dlname in
- *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll)
- # If a -bindir argument was supplied, place the dll there.
- if test "x$bindir" != x ;
- then
- func_relative_path "$install_libdir" "$bindir"
- tdlname=$func_relative_path_result$dlname
- else
- # Otherwise fall back on heuristic.
- tdlname=../bin/$dlname
- fi
- ;;
- esac
- $ECHO > $output "\
-# $outputname - a libtool library file
-# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
-#
-# Please DO NOT delete this file!
-# It is necessary for linking the library.
-
-# The name that we can dlopen(3).
-dlname='$tdlname'
-
-# Names of this library.
-library_names='$library_names'
-
-# The name of the static archive.
-old_library='$old_library'
-
-# Linker flags that can not go in dependency_libs.
-inherited_linker_flags='$new_inherited_linker_flags'
-
-# Libraries that this one depends upon.
-dependency_libs='$dependency_libs'
-
-# Names of additional weak libraries provided by this library
-weak_library_names='$weak_libs'
-
-# Version information for $libname.
-current=$current
-age=$age
-revision=$revision
-
-# Is this an already installed library?
-installed=$installed
-
-# Should we warn about portability when linking against -modules?
-shouldnotlink=$module
-
-# Files to dlopen/dlpreopen
-dlopen='$dlfiles'
-dlpreopen='$dlprefiles'
-
-# Directory that this library needs to be installed in:
-libdir='$install_libdir'"
- if test "$installed" = no && test "$need_relink" = yes; then
- $ECHO >> $output "\
-relink_command=\"$relink_command\""
- fi
- done
- }
-
- # Do a symbolic link so that the libtool archive can be found in
- # LD_LIBRARY_PATH before the program is installed.
- func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?'
- ;;
- esac
- exit $EXIT_SUCCESS
-}
-
-{ test "$opt_mode" = link || test "$opt_mode" = relink; } &&
- func_mode_link ${1+"$@"}
-
-
-# func_mode_uninstall arg...
-func_mode_uninstall ()
-{
- $opt_debug
- RM="$nonopt"
- files=
- rmforce=
- exit_status=0
-
- # This variable tells wrapper scripts just to set variables rather
- # than running their programs.
- libtool_install_magic="$magic"
-
- for arg
- do
- case $arg in
- -f) func_append RM " $arg"; rmforce=yes ;;
- -*) func_append RM " $arg" ;;
- *) func_append files " $arg" ;;
- esac
- done
-
- test -z "$RM" && \
- func_fatal_help "you must specify an RM program"
-
- rmdirs=
-
- for file in $files; do
- func_dirname "$file" "" "."
- dir="$func_dirname_result"
- if test "X$dir" = X.; then
- odir="$objdir"
- else
- odir="$dir/$objdir"
- fi
- func_basename "$file"
- name="$func_basename_result"
- test "$opt_mode" = uninstall && odir="$dir"
-
- # Remember odir for removal later, being careful to avoid duplicates
- if test "$opt_mode" = clean; then
- case " $rmdirs " in
- *" $odir "*) ;;
- *) func_append rmdirs " $odir" ;;
- esac
- fi
-
- # Don't error if the file doesn't exist and rm -f was used.
- if { test -L "$file"; } >/dev/null 2>&1 ||
- { test -h "$file"; } >/dev/null 2>&1 ||
- test -f "$file"; then
- :
- elif test -d "$file"; then
- exit_status=1
- continue
- elif test "$rmforce" = yes; then
- continue
- fi
-
- rmfiles="$file"
-
- case $name in
- *.la)
- # Possibly a libtool archive, so verify it.
- if func_lalib_p "$file"; then
- func_source $dir/$name
-
- # Delete the libtool libraries and symlinks.
- for n in $library_names; do
- func_append rmfiles " $odir/$n"
- done
- test -n "$old_library" && func_append rmfiles " $odir/$old_library"
-
- case "$opt_mode" in
- clean)
- case " $library_names " in
- *" $dlname "*) ;;
- *) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;;
- esac
- test -n "$libdir" && func_append rmfiles " $odir/$name $odir/${name}i"
- ;;
- uninstall)
- if test -n "$library_names"; then
- # Do each command in the postuninstall commands.
- func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
- fi
-
- if test -n "$old_library"; then
- # Do each command in the old_postuninstall commands.
- func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
- fi
- # FIXME: should reinstall the best remaining shared library.
- ;;
- esac
- fi
- ;;
-
- *.lo)
- # Possibly a libtool object, so verify it.
- if func_lalib_p "$file"; then
-
- # Read the .lo file
- func_source $dir/$name
-
- # Add PIC object to the list of files to remove.
- if test -n "$pic_object" &&
- test "$pic_object" != none; then
- func_append rmfiles " $dir/$pic_object"
- fi
-
- # Add non-PIC object to the list of files to remove.
- if test -n "$non_pic_object" &&
- test "$non_pic_object" != none; then
- func_append rmfiles " $dir/$non_pic_object"
- fi
- fi
- ;;
-
- *)
- if test "$opt_mode" = clean ; then
- noexename=$name
- case $file in
- *.exe)
- func_stripname '' '.exe' "$file"
- file=$func_stripname_result
- func_stripname '' '.exe' "$name"
- noexename=$func_stripname_result
- # $file with .exe has already been added to rmfiles,
- # add $file without .exe
- func_append rmfiles " $file"
- ;;
- esac
- # Do a test to see if this is a libtool program.
- if func_ltwrapper_p "$file"; then
- if func_ltwrapper_executable_p "$file"; then
- func_ltwrapper_scriptname "$file"
- relink_command=
- func_source $func_ltwrapper_scriptname_result
- func_append rmfiles " $func_ltwrapper_scriptname_result"
- else
- relink_command=
- func_source $dir/$noexename
- fi
-
- # note $name still contains .exe if it was in $file originally
- # as does the version of $file that was added into $rmfiles
- func_append rmfiles " $odir/$name $odir/${name}S.${objext}"
- if test "$fast_install" = yes && test -n "$relink_command"; then
- func_append rmfiles " $odir/lt-$name"
- fi
- if test "X$noexename" != "X$name" ; then
- func_append rmfiles " $odir/lt-${noexename}.c"
- fi
- fi
- fi
- ;;
- esac
- func_show_eval "$RM $rmfiles" 'exit_status=1'
- done
-
- # Try to remove the ${objdir}s in the directories where we deleted files
- for dir in $rmdirs; do
- if test -d "$dir"; then
- func_show_eval "rmdir $dir >/dev/null 2>&1"
- fi
- done
-
- exit $exit_status
-}
-
-{ test "$opt_mode" = uninstall || test "$opt_mode" = clean; } &&
- func_mode_uninstall ${1+"$@"}
-
-test -z "$opt_mode" && {
- help="$generic_help"
- func_fatal_help "you must specify a MODE"
-}
-
-test -z "$exec_cmd" && \
- func_fatal_help "invalid operation mode \`$opt_mode'"
-
-if test -n "$exec_cmd"; then
- eval exec "$exec_cmd"
- exit $EXIT_FAILURE
-fi
-
-exit $exit_status
-
-
-# The TAGs below are defined such that we never get into a situation
-# in which we disable both kinds of libraries. Given conflicting
-# choices, we go for a static library, that is the most portable,
-# since we can't tell whether shared libraries were disabled because
-# the user asked for that or because the platform doesn't support
-# them. This is particularly important on AIX, because we don't
-# support having both static and shared libraries enabled at the same
-# time on that platform, so we default to a shared-only configuration.
-# If a disable-shared tag is given, we'll fallback to a static-only
-# configuration. But we'll never go from static-only to shared-only.
-
-# ### BEGIN LIBTOOL TAG CONFIG: disable-shared
-build_libtool_libs=no
-build_old_libs=yes
-# ### END LIBTOOL TAG CONFIG: disable-shared
-
-# ### BEGIN LIBTOOL TAG CONFIG: disable-static
-build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
-# ### END LIBTOOL TAG CONFIG: disable-static
-
-# Local Variables:
-# mode:shell-script
-# sh-indentation:2
-# End:
-# vi:sw=2
-