1 files changed, 168 insertions, 0 deletions
diff --git a/png/pngwio.c b/png/pngwio.c
new file mode 100644
index 0000000..1b525f9
--- /dev/null
+++ b/png/pngwio.c
@@ -0,0 +1,168 @@
+
+/* pngwio.c - functions for data output
+ *
+ * Last changed in libpng 1.6.9 [February 6, 2014]
+ * Copyright (c) 1998-2014 Glenn Randers-Pehrson
+ * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger)
+ * (Version 0.88 Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.)
+ *
+ * This code is released under the libpng license.
+ * For conditions of distribution and use, see the disclaimer
+ * and license in png.h
+ *
+ * This file provides a location for all output.  Users who need
+ * special handling are expected to write functions that have the same
+ * arguments as these and perform similar functions, but that possibly
+ * use different output methods.  Note that you shouldn't change these
+ * functions, but rather write replacement functions and then change
+ * them at run time with png_set_write_fn(...).
+ */
+
+#include "pngpriv.h"
+
+#ifdef PNG_WRITE_SUPPORTED
+
+/* Write the data to whatever output you are using.  The default routine
+ * writes to a file pointer.  Note that this routine sometimes gets called
+ * with very small lengths, so you should implement some kind of simple
+ * buffering if you are using unbuffered writes.  This should never be asked
+ * to write more than 64K on a 16 bit machine.
+ */
+
+void /* PRIVATE */
+png_write_data(png_structrp png_ptr, png_const_bytep data, png_size_t length)
+{
+   /* NOTE: write_data_fn must not change the buffer! */
+   if (png_ptr->write_data_fn != NULL )
+      (*(png_ptr->write_data_fn))(png_ptr, png_constcast(png_bytep,data),
+         length);
+
+   else
+      png_error(png_ptr, "Call to NULL write function");
+}
+
+#ifdef PNG_STDIO_SUPPORTED
+/* This is the function that does the actual writing of data.  If you are
+ * not writing to a standard C stream, you should create a replacement
+ * write_data function and use it at run time with png_set_write_fn(), rather
+ * than changing the library.
+ */
+void PNGCBAPI
+png_default_write_data(png_structp png_ptr, png_bytep data, png_size_t length)
+{
+   png_size_t check;
+
+   if (png_ptr == NULL)
+      return;
+
+   check = fwrite(data, 1, length, (png_FILE_p)(png_ptr->io_ptr));
+
+   if (check != length)
+      png_error(png_ptr, "Write Error");
+}
+#endif
+
+/* This function is called to output any data pending writing (normally
+ * to disk).  After png_flush is called, there should be no data pending
+ * writing in any buffers.
+ */
+#ifdef PNG_WRITE_FLUSH_SUPPORTED
+void /* PRIVATE */
+png_flush(png_structrp png_ptr)
+{
+   if (png_ptr->output_flush_fn != NULL)
+      (*(png_ptr->output_flush_fn))(png_ptr);
+}
+
+#  ifdef PNG_STDIO_SUPPORTED
+void PNGCBAPI
+png_default_flush(png_structp png_ptr)
+{
+   png_FILE_p io_ptr;
+
+   if (png_ptr == NULL)
+      return;
+
+   io_ptr = png_voidcast(png_FILE_p, (png_ptr->io_ptr));
+   fflush(io_ptr);
+}
+#  endif
+#endif
+
+/* This function allows the application to supply new output functions for
+ * libpng if standard C streams aren't being used.
+ *
+ * This function takes as its arguments:
+ * png_ptr       - pointer to a png output data structure
+ * io_ptr        - pointer to user supplied structure containing info about
+ *                 the output functions.  May be NULL.
+ * write_data_fn - pointer to a new output function that takes as its
+ *                 arguments a pointer to a png_struct, a pointer to
+ *                 data to be written, and a 32-bit unsigned int that is
+ *                 the number of bytes to be written.  The new write
+ *                 function should call png_error(png_ptr, "Error msg")
+ *                 to exit and output any fatal error messages.  May be
+ *                 NULL, in which case libpng's default function will
+ *                 be used.
+ * flush_data_fn - pointer to a new flush function that takes as its
+ *                 arguments a pointer to a png_struct.  After a call to
+ *                 the flush function, there should be no data in any buffers
+ *                 or pending transmission.  If the output method doesn't do
+ *                 any buffering of output, a function prototype must still be
+ *                 supplied although it doesn't have to do anything.  If
+ *                 PNG_WRITE_FLUSH_SUPPORTED is not defined at libpng compile
+ *                 time, output_flush_fn will be ignored, although it must be
+ *                 supplied for compatibility.  May be NULL, in which case
+ *                 libpng's default function will be used, if
+ *                 PNG_WRITE_FLUSH_SUPPORTED is defined.  This is not
+ *                 a good idea if io_ptr does not point to a standard
+ *                 *FILE structure.
+ */
+void PNGAPI
+png_set_write_fn(png_structrp png_ptr, png_voidp io_ptr,
+    png_rw_ptr write_data_fn, png_flush_ptr output_flush_fn)
+{
+   if (png_ptr == NULL)
+      return;
+
+   png_ptr->io_ptr = io_ptr;
+
+#ifdef PNG_STDIO_SUPPORTED
+   if (write_data_fn != NULL)
+      png_ptr->write_data_fn = write_data_fn;
+
+   else
+      png_ptr->write_data_fn = png_default_write_data;
+#else
+   png_ptr->write_data_fn = write_data_fn;
+#endif
+
+#ifdef PNG_WRITE_FLUSH_SUPPORTED
+#  ifdef PNG_STDIO_SUPPORTED
+
+   if (output_flush_fn != NULL)
+      png_ptr->output_flush_fn = output_flush_fn;
+
+   else
+      png_ptr->output_flush_fn = png_default_flush;
+
+#  else
+   png_ptr->output_flush_fn = output_flush_fn;
+#  endif
+#else
+   PNG_UNUSED(output_flush_fn)
+#endif /* PNG_WRITE_FLUSH_SUPPORTED */
+
+#ifdef PNG_READ_SUPPORTED
+   /* It is an error to read while writing a png file */
+   if (png_ptr->read_data_fn != NULL)
+   {
+      png_ptr->read_data_fn = NULL;
+
+      png_warning(png_ptr,
+          "Can't set both read_data_fn and write_data_fn in the"
+          " same structure");
+   }
+#endif
+}
+#endif /* PNG_WRITE_SUPPORTED */