diff options
Diffstat (limited to 'spectro/ex1.h')
| -rwxr-xr-x[-rw-r--r--] | spectro/ex1.h | 108 |
1 files changed, 84 insertions, 24 deletions
diff --git a/spectro/ex1.h b/spectro/ex1.h index 456ab75..d69b7ca 100644..100755 --- a/spectro/ex1.h +++ b/spectro/ex1.h @@ -37,48 +37,108 @@ #include "inst.h" -/* Fake Error codes */ -#define EX1_INTERNAL_ERROR 0xff01 /* Internal software error */ -#define EX1_TIMEOUT 0xff02 /* Communication timeout */ -#define EX1_COMS_FAIL 0xff03 /* Communication failure */ -#define EX1_UNKNOWN_MODEL 0xff04 /* Not a JETI ex1 */ -#define EX1_DATA_PARSE_ERROR 0xff05 /* Read data parsing error */ +/* Communication errors */ +#define EX1_TIMEOUT 0xFF02 /* Communication timeout */ +#define EX1_COMS_FAIL 0xFF03 /* Communication failure */ +#define EX1_UNKNOWN_MODEL 0xFF04 /* Not an ex1 */ +#define EX1_SHORT_WRITE 0xFF06 /* Write failure */ +#define EX1_SHORT_READ 0xFF07 /* Read failure */ +#define EX1_LONG_READ 0xFF08 /* Read more data than expected */ +#define EX1_DATA_CHSUM_ERROR 0xFF09 /* Checksum failed */ +#define EX1_DATA_PARSE_ERROR 0xFF0A /* Read data parsing error */ +/* Measurement errors */ +#define EX1_RD_SENSORSATURATED 0xFF0B /* Sensor is saturated */ -/* Real instrument error code */ -#define EX1_OK 0 -#define EX1_NOT_IMP 1 /* Internal software errors */ -#define EX1_INT_THREADFAILED 1000 +#define EX1_INTERNAL_ERROR 0xE000 /* Internal software error */ +#define EX1_NOT_IMP 0xE001 /* Function not implemented */ +#define EX1_MEMORY 0xE002 /* Memory allocation fail */ +#define EX1_INT_THREADFAILED 0xE003 +#define EX1_INTTIME_RANGE 0xE004 /* Integration time is out of range */ +#define EX1_DELTIME_RANGE 0xE005 /* Trigger Delaty time time is out of range */ +#define EX1_STROBE_RANGE 0xE006 /* Strobe period time is out of range */ +#define EX1_AVERAGE_RANGE 0xE007 /* Number to average is out of range */ +#define EX1_BOXCAR_RANGE 0xE008 /* Boxcar filtering size out of ange */ +#define EX1_INT_CAL_SAVE 0xE009 /* Saving calibration to file failed */ +#define EX1_INT_CAL_RESTORE 0xE00A /* Restoring calibration to file failed */ +#define EX1_INT_CAL_TOUCH 0xE00B /* Touching calibration to file failed */ +#define EX1_INT_CIECONVFAIL 0xE00C /* Creating spec. to XYZ conversion failed */ + +/* Configuration or operation errors */ +#define EX1_NO_WL_CAL 0xD001 /* There is no wavelegth calibration info */ +#define EX1_NO_IR_CAL 0xD002 /* There is no irradiance calibration info */ + +/* Real instrument error code */ +#define EX1_OK 0 +#define EX1_UNSUP_PROTOCOL 1 +#define EX1_MES_UNKN 2 +#define EX1_MES_BAD_CHSUM 3 +#define EX1_MES_TOO_LARGE 4 +#define EX1_MES_PAYLD_LEN 5 +#define EX1_MES_PAYLD_INV 6 +#define EX1_DEV_NOT_RDY 7 +#define EX1_MES_UNK_CHSUM 8 +#define EX1_DEV_UNX_RST 9 +#define EX1_TOO_MANY_BUSSES 10 +#define EX1_OUT_OF_MEM 11 +#define EX1_NO_INF 12 +#define EX1_DEV_INT_ERR 13 +#define EX1_DECRYPT_ERR 100 +#define EX1_FIRM_LAYOUT 101 +#define EX1_PACKET_SIZE 102 +#define EX1_HW_REV_INCPT 103 +#define EX1_FLASH_MAP 104 +#define EX1_DEFERRED 255 /* EX1 communication object */ struct _ex1 { INST_OBJ_BASE - amutex lock; /* Command lock (not necessary) */ + ORD8 *cbuf; /* USB communication buffer */ + int cbufsz; /* Current cbuf size */ - int model; /* ex1 model number */ + char *alias; /* Alias string (OEM Model ?) */ + int hwrev; /* Hardware rev number */ + int fwrev; /* Hardware rev number */ + char *serno; /* ASCII serial number */ + int slitw; /* Slit width in microns */ + int fiberw; /* Fiber width in microns */ + char *grating; /* Grating description */ + char *filter; /* Filter description */ + char *coating; /* Coating description */ inst_mode mode; /* Currently instrument mode */ - int refrmode; /* nz if in refresh display mode */ - /* (1201 has a refresh mode ?? but can't measure frequency) */ - int rrset; /* Flag, nz if the refresh rate has been determined */ - double refperiod; /* if > 0.0 in refmode, target int time quantization */ - double refrate; /* Measured refresh rate in Hz */ - int refrvalid; /* nz if refrate is valid */ + double max_meastime; /* Maximum integration time to use for measurement */ + double inttime; /* Current integration time */ + int noaverage; /* Current number being averaged */ - inst_opt_type trig; /* Reading trigger mode */ + rspec_inf sconf; /* Measurement & spectral configuration */ + + /* Don't know what to do with stray light - not present in EX1 ? */ + unsigned int nstraylight; /* Number in array */ + double *straylight; /* Array of stray light coefficients. */ + + unsigned int nemis_coef; /* Number in array */ + double *emis_coef; /* Emission calibration coefficients for raw */ + double emis_area; /* Emission collection area */ - double measto; /* Expected measurement timeout value */ - int nbands; /* Number of spectral bands */ - double wl_short; - double wl_long; + /* Adaptive emission black calibration */ + int idark_valid; /* idark calibration factors valid */ + time_t iddate; /* Date/time of last dark idark calibration */ + double idark_int_time[2]; /* Target dark integration times */ /* Other state */ + inst_opt_type trig; /* Reading trigger mode */ + int want_dcalib; /* Want Dark Calibration at start */ + int noinitcalib; /* Disable initial calibration if not essential */ + int lo_secs; /* Seconds since last opened (from calibration file mod time) */ + + xsp2cie *conv; /* spectral to XYZ conversion */ - }; typedef struct _ex1 ex1; +}; typedef struct _ex1 ex1; /* Constructor */ extern ex1 *new_ex1(icoms *icom, instType itype); |