1 files changed, 202 insertions, 0 deletions
diff --git a/tiff/contrib/mac-mpw/libtiff.make b/tiff/contrib/mac-mpw/libtiff.make
new file mode 100644
index 0000000..ee5296e
--- /dev/null
+++ b/tiff/contrib/mac-mpw/libtiff.make
@@ -0,0 +1,202 @@
+#
+# Tag Image File Format Library
+#
+# Copyright (c) 1988, 1989, 1990, 1991, 1992, 1993, 1994 Sam Leffler
+# Copyright (c) 1991, 1992, 1993, 1994 Silicon Graphics, Inc.
+# 
+# Permission to use, copy, modify, distribute, and sell this software and 
+# its documentation for any purpose is hereby granted without fee, provided
+# that (i) the above copyright notices and this permission notice appear in
+# all copies of the software and related documentation, and (ii) the names of
+# Sam Leffler and Silicon Graphics may not be used in any advertising or
+# publicity relating to the software without the specific, prior written
+# permission of Sam Leffler and Silicon Graphics.
+# 
+# THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, 
+# EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY 
+# WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.  
+# 
+# IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR
+# ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND,
+# OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
+# WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF 
+# LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE 
+# OF THIS SOFTWARE.
+#
+
+#
+# Makefile for Mac using MPW 3.3.1 and MPW C 3.2.4
+#
+#  Note:  This file must be run through "mactrans" before it can
+#  be recognized by MPW as a valid makefile. The problem is that MPW
+#  uses special non-ASCII characters, which tend to get mangled when stored
+#  in unix tar files, etc. "mactrans" is built as part of the TIFF MPW build.
+#
+#
+
+DEPTH   = ::
+
+# FAX Options: If you do not wish to include the FAX options, uncomment
+# the first four definitions and comment out the next four 
+# definitions. Note that to build programs with the FAX libraries you
+# have to include "-model far" in your compile and link statements.
+#
+# Also, to build the fax code (including the tif_fax3sm.c file, which is
+# created by the MPW tool "mkg3states", also built below), you will
+# need to size the MPW program up to about 6 megabytes or so.
+
+#FAX_OPTIONS = 
+#FAX_OBJECTS = 	
+#FAX_SOURCES = tif_fax3.c 
+#FAX_CONFIG = 
+
+FAX_OPTIONS = -model far
+FAX_OBJECTS = 	tif_fax3.c.o tif_fax3sm.c.o
+FAX_SOURCES = tif_fax3.c tif_fax3sm.c
+FAX_CONFIG = -d CCITT_SUPPORT
+
+NULL=
+
+RM = delete -y -i 
+COPTS = 
+
+LIBPORT=::port:libport.o
+
+#
+.c.o %c4 .c
+	{C} -model far {CFLAGS} -s {Default} {DepDir}{Default}.c -o {TargDir}{Default}.c.o
+
+
+CONF_LIBRARY= %b6
+	-d HAVE_IEEEFP=1 %b6
+	-d BSDTYPES 
+
+CONF_COMPRESSION= %b6
+	{FAX_CONFIG} %b6
+	-d COMPRESSION_SUPPORT %b6
+	-d PACKBITS_SUPPORT 	%b6
+	-d LZW_SUPPORT 	%b6
+	-d THUNDER_SUPPORT %b6
+	-d NEXT_SUPPORT 
+
+CFLAGS=	{FAX_OPTIONS} {IPATH} {CONF_LIBRARY} {CONF_COMPRESSION} 
+
+INCS=	tiff.h tiffio.h
+
+SRCS=	%b6
+	{FAX_SOURCES} %b6
+	tif_apple.c %b6
+	tif_aux.c %b6
+	tif_close.c %b6
+	tif_codec.c %b6
+	tif_compress.c %b6
+	tif_dir.c %b6
+	tif_dirinfo.c %b6
+	tif_dirread.c %b6
+	tif_dirwrite.c %b6
+	tif_dumpmode.c %b6
+	tif_error.c %b6
+	tif_getimage.c %b6
+	tif_jpeg.c %b6
+	tif_flush.c %b6
+	tif_lzw.c %b6
+	tif_next.c %b6
+	tif_open.c %b6
+	tif_packbits.c %b6
+	tif_predict.c %b6
+	tif_print.c %b6
+	tif_read.c %b6
+	tif_swab.c %b6
+	tif_strip.c %b6
+	tif_thunder.c %b6
+	tif_tile.c %b6
+	tif_version.c %b6
+	tif_warning.c %b6
+	tif_write.c %b6
+	tif_zip.c %b6
+	{NULL}
+
+OBJS=	%b6
+	{FAX_OBJECTS} %b6
+	tif_apple.c.o %b6
+	tif_aux.c.o %b6
+	tif_close.c.o %b6
+	tif_codec.c.o %b6
+	tif_compress.c.o %b6
+	tif_dir.c.o %b6
+	tif_dirinfo.c.o %b6
+	tif_dirread.c.o %b6
+	tif_dirwrite.c.o %b6
+	tif_dumpmode.c.o %b6
+	tif_error.c.o %b6
+	tif_getimage.c.o %b6
+	tif_jpeg.c.o %b6
+	tif_flush.c.o %b6
+	tif_lzw.c.o %b6
+	tif_next.c.o %b6
+	tif_open.c.o %b6
+	tif_packbits.c.o %b6
+	tif_predict.c.o %b6
+	tif_print.c.o %b6
+	tif_read.c.o %b6
+	tif_swab.c.o %b6
+	tif_strip.c.o %b6
+	tif_thunder.c.o %b6
+	tif_tile.c.o %b6
+	tif_version.c.o %b6
+	tif_warning.c.o %b6
+	tif_write.c.o %b6
+	tif_zip.c.o %b6
+	{NULL}
+
+ALL=libtiff.o
+
+all %c4 {ALL}
+
+libtiff.o %c4 {OBJS}
+	Lib  {OBJS} -o libtiff.o
+	
+
+{OBJS} %c4 tiffio.h tiff.h tiffcomp.h tiffiop.h tiffconf.h
+
+#
+# The finite state machine tables used by the G3/G4 decoders
+# are generated by the mkg3states program.  On systems without
+# make these rules have to be manually carried out.
+#
+tif_fax3sm.c %c4 mkg3states tif_fax3.h
+        {RM} tif_fax3sm.c || set status 0
+	:mkg3states -c const tif_fax3sm.c
+
+mkg3states.c.o %c4 mkg3states.c
+   C -model far  mkg3states.c -o mkg3states.c.o
+
+mkg3states %c4%c4 mkg3states.c.o
+	Link -model far -d -c 'MPS ' -t MPST %b6
+		mkg3states.c.o %b6
+		{LIBPORT} %b6
+		"{CLibraries}"StdClib.o %b6
+		"{Libraries}"Stubs.o %b6
+		"{Libraries}"Runtime.o %b6
+		"{Libraries}"Interface.o %b6
+		-o mkg3states
+
+ALPHA   = "{DEPTH}dist:tiff.alpha"
+VERSION = "{DEPTH}VERSION"
+
+version.h %c4 {VERSION} {ALPHA}
+        Set VERSION1 `catenate {VERSION}` 
+        Set VERSION2 "{VERSION1}`streamedit -e "1 rep /%a5%c5 %c5 (%c5)%a81/ %a81" {ALPHA}`" 
+        delete -y -i version.h || set status 0
+	echo '#define VERSION "LIBTIFF, Version' {VERSION2} '\nCopyright (c) 1988-1995 Sam Leffler\nCopyright (c) 1991-1995 Silicon Graphics, Inc."' >version.h
+
+tif_version.c.o %c4 version.h
+
+clean %c4
+	{RM} {ALL}  || set status 0
+	{RM} {OBJS} || set status 0
+	{RM} mkg3states || set status 0
+	{RM} mkg3states.c.o || set status 0
+	{RM} tif_fax3sm.c%c5 || set status 0
+	{RM} version.h || set status 0
+