diff options
Diffstat (limited to 'tiff/man')
72 files changed, 0 insertions, 10264 deletions
diff --git a/tiff/man/Makefile.am b/tiff/man/Makefile.am deleted file mode 100755 index bcad9ba..0000000 --- a/tiff/man/Makefile.am +++ /dev/null @@ -1,98 +0,0 @@ -# Tag Image File Format (TIFF) Software -# -# Copyright (C) 2004, Andrey Kiselev <dron@ak4719.spb.edu> -# -# Permission to use, copy, modify, distribute, and sell this software and -# its documentation for any purpose is hereby granted without fee, provided -# that (i) the above copyright notices and this permission notice appear in -# all copies of the software and related documentation, and (ii) the names of -# Sam Leffler and Silicon Graphics may not be used in any advertising or -# publicity relating to the software without the specific, prior written -# permission of Sam Leffler and Silicon Graphics. -# -# THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -# EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -# WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -# -# IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -# ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -# OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -# WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -# LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -# OF THIS SOFTWARE. - -# Process this file with automake to produce Makefile.in. - -dist_man1_MANS = \ - bmp2tiff.1 \ - fax2ps.1 \ - fax2tiff.1 \ - gif2tiff.1 \ - pal2rgb.1 \ - ppm2tiff.1 \ - ras2tiff.1 \ - raw2tiff.1 \ - rgb2ycbcr.1 \ - sgi2tiff.1 \ - thumbnail.1 \ - tiff2bw.1 \ - tiff2pdf.1 \ - tiff2ps.1 \ - tiff2rgba.1 \ - tiffcmp.1 \ - tiffcp.1 \ - tiffcrop.1 \ - tiffdither.1 \ - tiffdump.1 \ - tiffgt.1 \ - tiffinfo.1 \ - tiffmedian.1 \ - tiffset.1 \ - tiffsplit.1 \ - tiffsv.1 - -dist_man3_MANS = \ - libtiff.3tiff \ - TIFFbuffer.3tiff \ - TIFFClose.3tiff \ - TIFFcodec.3tiff \ - TIFFcolor.3tiff \ - TIFFDataWidth.3tiff \ - TIFFError.3tiff \ - TIFFFieldDataType.3tiff \ - TIFFFieldName.3tiff \ - TIFFFieldPassCount.3tiff \ - TIFFFieldReadCount.3tiff \ - TIFFFieldTag.3tiff \ - TIFFFieldWriteCount.3tiff \ - TIFFFlush.3tiff \ - TIFFGetField.3tiff \ - TIFFmemory.3tiff \ - TIFFOpen.3tiff \ - TIFFPrintDirectory.3tiff \ - TIFFquery.3tiff \ - TIFFReadDirectory.3tiff \ - TIFFReadEncodedStrip.3tiff \ - TIFFReadEncodedTile.3tiff \ - TIFFReadRawStrip.3tiff \ - TIFFReadRawTile.3tiff \ - TIFFReadRGBAImage.3tiff \ - TIFFReadRGBAStrip.3tiff \ - TIFFReadRGBATile.3tiff \ - TIFFReadScanline.3tiff \ - TIFFReadTile.3tiff \ - TIFFRGBAImage.3tiff \ - TIFFSetDirectory.3tiff \ - TIFFSetField.3tiff \ - TIFFsize.3tiff \ - TIFFstrip.3tiff \ - TIFFswab.3tiff \ - TIFFtile.3tiff \ - TIFFWarning.3tiff \ - TIFFWriteDirectory.3tiff \ - TIFFWriteEncodedStrip.3tiff \ - TIFFWriteEncodedTile.3tiff \ - TIFFWriteRawStrip.3tiff \ - TIFFWriteRawTile.3tiff \ - TIFFWriteScanline.3tiff \ - TIFFWriteTile.3tiff diff --git a/tiff/man/Makefile.in b/tiff/man/Makefile.in deleted file mode 100755 index 722cf50..0000000 --- a/tiff/man/Makefile.in +++ /dev/null @@ -1,687 +0,0 @@ -# Makefile.in generated by automake 1.15 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994-2014 Free Software Foundation, Inc. - -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -# Tag Image File Format (TIFF) Software -# -# Copyright (C) 2004, Andrey Kiselev <dron@ak4719.spb.edu> -# -# Permission to use, copy, modify, distribute, and sell this software and -# its documentation for any purpose is hereby granted without fee, provided -# that (i) the above copyright notices and this permission notice appear in -# all copies of the software and related documentation, and (ii) the names of -# Sam Leffler and Silicon Graphics may not be used in any advertising or -# publicity relating to the software without the specific, prior written -# permission of Sam Leffler and Silicon Graphics. -# -# THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -# EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -# WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -# -# IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -# ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -# OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -# WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -# LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -# OF THIS SOFTWARE. - -# Process this file with automake to produce Makefile.in. -VPATH = @srcdir@ -am__is_gnu_make = { \ - if test -z '$(MAKELEVEL)'; then \ - false; \ - elif test -n '$(MAKE_HOST)'; then \ - true; \ - elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ - true; \ - else \ - false; \ - fi; \ -} -am__make_running_with_option = \ - case $${target_option-} in \ - ?) ;; \ - *) echo "am__make_running_with_option: internal error: invalid" \ - "target option '$${target_option-}' specified" >&2; \ - exit 1;; \ - esac; \ - has_opt=no; \ - sane_makeflags=$$MAKEFLAGS; \ - if $(am__is_gnu_make); then \ - sane_makeflags=$$MFLAGS; \ - else \ - case $$MAKEFLAGS in \ - *\\[\ \ ]*) \ - bs=\\; \ - sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ - | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ - esac; \ - fi; \ - skip_next=no; \ - strip_trailopt () \ - { \ - flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ - }; \ - for flg in $$sane_makeflags; do \ - test $$skip_next = yes && { skip_next=no; continue; }; \ - case $$flg in \ - *=*|--*) continue;; \ - -*I) strip_trailopt 'I'; skip_next=yes;; \ - -*I?*) strip_trailopt 'I';; \ - -*O) strip_trailopt 'O'; skip_next=yes;; \ - -*O?*) strip_trailopt 'O';; \ - -*l) strip_trailopt 'l'; skip_next=yes;; \ - -*l?*) strip_trailopt 'l';; \ - -[dEDm]) skip_next=yes;; \ - -[JT]) skip_next=yes;; \ - esac; \ - case $$flg in \ - *$$target_option*) has_opt=yes; break;; \ - esac; \ - done; \ - test $$has_opt = yes -am__make_dryrun = (target_option=n; $(am__make_running_with_option)) -am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -subdir = man -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/acinclude.m4 \ - $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ - $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ - $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) -mkinstalldirs = $(SHELL) $(top_srcdir)/config/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/libtiff/tif_config.h \ - $(top_builddir)/libtiff/tiffconf.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -AM_V_P = $(am__v_P_@AM_V@) -am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) -am__v_P_0 = false -am__v_P_1 = : -AM_V_GEN = $(am__v_GEN_@AM_V@) -am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) -am__v_GEN_0 = @echo " GEN " $@; -am__v_GEN_1 = -AM_V_at = $(am__v_at_@AM_V@) -am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) -am__v_at_0 = @ -am__v_at_1 = -SOURCES = -DIST_SOURCES = -am__can_run_installinfo = \ - case $$AM_UPDATE_INFO_DIR in \ - n|no|NO) false;; \ - *) (install-info --version) >/dev/null 2>&1;; \ - esac -am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; -am__vpath_adj = case $$p in \ - $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ - *) f=$$p;; \ - esac; -am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; -am__install_max = 40 -am__nobase_strip_setup = \ - srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` -am__nobase_strip = \ - for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" -am__nobase_list = $(am__nobase_strip_setup); \ - for p in $$list; do echo "$$p $$p"; done | \ - sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ - $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ - if (++n[$$2] == $(am__install_max)) \ - { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ - END { for (dir in files) print dir, files[dir] }' -am__base_list = \ - sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ - sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' -am__uninstall_files_from_dir = { \ - test -z "$$files" \ - || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ - || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ - $(am__cd) "$$dir" && rm -f $$files; }; \ - } -man1dir = $(mandir)/man1 -am__installdirs = "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(man3dir)" -man3dir = $(mandir)/man3 -NROFF = nroff -MANS = $(dist_man1_MANS) $(dist_man3_MANS) -am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) -am__DIST_COMMON = $(dist_man1_MANS) $(dist_man3_MANS) \ - $(srcdir)/Makefile.in $(top_srcdir)/config/mkinstalldirs -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -AS = @AS@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CXX = @CXX@ -CXXCPP = @CXXCPP@ -CXXDEPMODE = @CXXDEPMODE@ -CXXFLAGS = @CXXFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FGREP = @FGREP@ -GLUT_CFLAGS = @GLUT_CFLAGS@ -GLUT_LIBS = @GLUT_LIBS@ -GLU_CFLAGS = @GLU_CFLAGS@ -GLU_LIBS = @GLU_LIBS@ -GL_CFLAGS = @GL_CFLAGS@ -GL_LIBS = @GL_LIBS@ -GREP = @GREP@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBDIR = @LIBDIR@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTIFF_ALPHA_VERSION = @LIBTIFF_ALPHA_VERSION@ -LIBTIFF_DOCDIR = @LIBTIFF_DOCDIR@ -LIBTIFF_MAJOR_VERSION = @LIBTIFF_MAJOR_VERSION@ -LIBTIFF_MICRO_VERSION = @LIBTIFF_MICRO_VERSION@ -LIBTIFF_MINOR_VERSION = @LIBTIFF_MINOR_VERSION@ -LIBTIFF_RELEASE_DATE = @LIBTIFF_RELEASE_DATE@ -LIBTIFF_VERSION = @LIBTIFF_VERSION@ -LIBTIFF_VERSION_INFO = @LIBTIFF_VERSION_INFO@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ -MAINT = @MAINT@ -MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ -MKDIR_P = @MKDIR_P@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PTHREAD_CC = @PTHREAD_CC@ -PTHREAD_CFLAGS = @PTHREAD_CFLAGS@ -PTHREAD_LIBS = @PTHREAD_LIBS@ -RANLIB = @RANLIB@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -VERSION = @VERSION@ -XMKMF = @XMKMF@ -X_CFLAGS = @X_CFLAGS@ -X_EXTRA_LIBS = @X_EXTRA_LIBS@ -X_LIBS = @X_LIBS@ -X_PRE_LIBS = @X_PRE_LIBS@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_CXX = @ac_ct_CXX@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -ax_pthread_config = @ax_pthread_config@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -tiff_libs_private = @tiff_libs_private@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -dist_man1_MANS = \ - bmp2tiff.1 \ - fax2ps.1 \ - fax2tiff.1 \ - gif2tiff.1 \ - pal2rgb.1 \ - ppm2tiff.1 \ - ras2tiff.1 \ - raw2tiff.1 \ - rgb2ycbcr.1 \ - sgi2tiff.1 \ - thumbnail.1 \ - tiff2bw.1 \ - tiff2pdf.1 \ - tiff2ps.1 \ - tiff2rgba.1 \ - tiffcmp.1 \ - tiffcp.1 \ - tiffcrop.1 \ - tiffdither.1 \ - tiffdump.1 \ - tiffgt.1 \ - tiffinfo.1 \ - tiffmedian.1 \ - tiffset.1 \ - tiffsplit.1 \ - tiffsv.1 - -dist_man3_MANS = \ - libtiff.3tiff \ - TIFFbuffer.3tiff \ - TIFFClose.3tiff \ - TIFFcodec.3tiff \ - TIFFcolor.3tiff \ - TIFFDataWidth.3tiff \ - TIFFError.3tiff \ - TIFFFieldDataType.3tiff \ - TIFFFieldName.3tiff \ - TIFFFieldPassCount.3tiff \ - TIFFFieldReadCount.3tiff \ - TIFFFieldTag.3tiff \ - TIFFFieldWriteCount.3tiff \ - TIFFFlush.3tiff \ - TIFFGetField.3tiff \ - TIFFmemory.3tiff \ - TIFFOpen.3tiff \ - TIFFPrintDirectory.3tiff \ - TIFFquery.3tiff \ - TIFFReadDirectory.3tiff \ - TIFFReadEncodedStrip.3tiff \ - TIFFReadEncodedTile.3tiff \ - TIFFReadRawStrip.3tiff \ - TIFFReadRawTile.3tiff \ - TIFFReadRGBAImage.3tiff \ - TIFFReadRGBAStrip.3tiff \ - TIFFReadRGBATile.3tiff \ - TIFFReadScanline.3tiff \ - TIFFReadTile.3tiff \ - TIFFRGBAImage.3tiff \ - TIFFSetDirectory.3tiff \ - TIFFSetField.3tiff \ - TIFFsize.3tiff \ - TIFFstrip.3tiff \ - TIFFswab.3tiff \ - TIFFtile.3tiff \ - TIFFWarning.3tiff \ - TIFFWriteDirectory.3tiff \ - TIFFWriteEncodedStrip.3tiff \ - TIFFWriteEncodedTile.3tiff \ - TIFFWriteRawStrip.3tiff \ - TIFFWriteRawTile.3tiff \ - TIFFWriteScanline.3tiff \ - TIFFWriteTile.3tiff - -all: all-am - -.SUFFIXES: -$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign man/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign man/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs -install-man1: $(dist_man1_MANS) - @$(NORMAL_INSTALL) - @list1='$(dist_man1_MANS)'; \ - list2=''; \ - test -n "$(man1dir)" \ - && test -n "`echo $$list1$$list2`" \ - || exit 0; \ - echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \ - { for i in $$list1; do echo "$$i"; done; \ - if test -n "$$list2"; then \ - for i in $$list2; do echo "$$i"; done \ - | sed -n '/\.1[a-z]*$$/p'; \ - fi; \ - } | while read p; do \ - if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; echo "$$p"; \ - done | \ - sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ - -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ - sed 'N;N;s,\n, ,g' | { \ - list=; while read file base inst; do \ - if test "$$base" = "$$inst"; then list="$$list $$file"; else \ - echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \ - $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \ - fi; \ - done; \ - for i in $$list; do echo "$$i"; done | $(am__base_list) | \ - while read files; do \ - test -z "$$files" || { \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \ - done; } - -uninstall-man1: - @$(NORMAL_UNINSTALL) - @list='$(dist_man1_MANS)'; test -n "$(man1dir)" || exit 0; \ - files=`{ for i in $$list; do echo "$$i"; done; \ - } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ - -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ - dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir) -install-man3: $(dist_man3_MANS) - @$(NORMAL_INSTALL) - @list1='$(dist_man3_MANS)'; \ - list2=''; \ - test -n "$(man3dir)" \ - && test -n "`echo $$list1$$list2`" \ - || exit 0; \ - echo " $(MKDIR_P) '$(DESTDIR)$(man3dir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(man3dir)" || exit 1; \ - { for i in $$list1; do echo "$$i"; done; \ - if test -n "$$list2"; then \ - for i in $$list2; do echo "$$i"; done \ - | sed -n '/\.3[a-z]*$$/p'; \ - fi; \ - } | while read p; do \ - if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; echo "$$p"; \ - done | \ - sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \ - -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ - sed 'N;N;s,\n, ,g' | { \ - list=; while read file base inst; do \ - if test "$$base" = "$$inst"; then list="$$list $$file"; else \ - echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man3dir)/$$inst'"; \ - $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man3dir)/$$inst" || exit $$?; \ - fi; \ - done; \ - for i in $$list; do echo "$$i"; done | $(am__base_list) | \ - while read files; do \ - test -z "$$files" || { \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man3dir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(man3dir)" || exit $$?; }; \ - done; } - -uninstall-man3: - @$(NORMAL_UNINSTALL) - @list='$(dist_man3_MANS)'; test -n "$(man3dir)" || exit 0; \ - files=`{ for i in $$list; do echo "$$i"; done; \ - } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \ - -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ - dir='$(DESTDIR)$(man3dir)'; $(am__uninstall_files_from_dir) -tags TAGS: - -ctags CTAGS: - -cscope cscopelist: - - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-am -all-am: Makefile $(MANS) -installdirs: - for dir in "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(man3dir)"; do \ - test -z "$$dir" || $(MKDIR_P) "$$dir"; \ - done -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - if test -z '$(STRIP)'; then \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - install; \ - else \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ - fi -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-libtool mostlyclean-am - -distclean: distclean-am - -rm -f Makefile -distclean-am: clean-am distclean-generic - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: install-man - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: install-man1 install-man3 - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: uninstall-man - -uninstall-man: uninstall-man1 uninstall-man3 - -.MAKE: install-am install-strip - -.PHONY: all all-am check check-am clean clean-generic clean-libtool \ - cscopelist-am ctags-am distclean distclean-generic \ - distclean-libtool distdir dvi dvi-am html html-am info info-am \ - install install-am install-data install-data-am install-dvi \ - install-dvi-am install-exec install-exec-am install-html \ - install-html-am install-info install-info-am install-man \ - install-man1 install-man3 install-pdf install-pdf-am \ - install-ps install-ps-am install-strip installcheck \ - installcheck-am installdirs maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-generic \ - mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \ - uninstall-am uninstall-man uninstall-man1 uninstall-man3 - -.PRECIOUS: Makefile - - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/tiff/man/TIFFClose.3tiff b/tiff/man/TIFFClose.3tiff deleted file mode 100755 index bcb7604..0000000 --- a/tiff/man/TIFFClose.3tiff +++ /dev/null @@ -1,53 +0,0 @@ -.\" $Id: TIFFClose.3tiff,v 1.3 2009-08-24 19:13:40 bfriesen Exp $ -.\" -.\" Copyright (c) 1988-1997 Sam Leffler -.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. -.\" -.\" Permission to use, copy, modify, distribute, and sell this software and -.\" its documentation for any purpose is hereby granted without fee, provided -.\" that (i) the above copyright notices and this permission notice appear in -.\" all copies of the software and related documentation, and (ii) the names of -.\" Sam Leffler and Silicon Graphics may not be used in any advertising or -.\" publicity relating to the software without the specific, prior written -.\" permission of Sam Leffler and Silicon Graphics. -.\" -.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -.\" -.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -.\" OF THIS SOFTWARE. -.\" -.if n .po 0 -.TH TIFFClose 3TIFF "November 2, 2005" "libtiff" -.SH NAME -TIFFClose \- close a previously opened -.SM TIFF -file -.SH SYNOPSIS -.B "#include <tiffio.h>" -.sp -.BI "void TIFFClose(TIFF *" tif ")" -.SH DESCRIPTION -.IR TIFFClose -closes a file that was previously opened with -.BR TIFFOpen (3TIFF). -Any buffered data are flushed to the file, including the contents of the -current directory (if modified); and all resources are reclaimed. -.SH DIAGNOSTICS -All error messages are directed to the -.BR TIFFError (3TIFF) -routine. -Likewise, warning messages are directed to the -.BR TIFFWarning (3TIFF) -routine. -.SH "SEE ALSO" -.BR libtiff (3TIFF), -.BR TIFFOpen (3TIFF) -.PP -Libtiff library home page: -.BR http://www.remotesensing.org/libtiff/ diff --git a/tiff/man/TIFFDataWidth.3tiff b/tiff/man/TIFFDataWidth.3tiff deleted file mode 100755 index cb274d8..0000000 --- a/tiff/man/TIFFDataWidth.3tiff +++ /dev/null @@ -1,74 +0,0 @@ -.\" $Id: TIFFDataWidth.3tiff,v 1.3 2006-03-23 14:54:02 dron Exp $ -.\" -.\" Copyright (c) 2002, Andrey Kiselev <dron@ak4719.spb.edu> -.\" -.\" Permission to use, copy, modify, distribute, and sell this software and -.\" its documentation for any purpose is hereby granted without fee, provided -.\" that (i) the above copyright notices and this permission notice appear in -.\" all copies of the software and related documentation, and (ii) the names of -.\" Sam Leffler and Silicon Graphics may not be used in any advertising or -.\" publicity relating to the software without the specific, prior written -.\" permission of Sam Leffler and Silicon Graphics. -.\" -.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -.\" -.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -.\" OF THIS SOFTWARE. -.\" -.if n .po 0 -.TH TIFFDataWidth 3TIFF "September 12, 2002" "libtiff" -.SH NAME -TIFFDataWidth \- Get the size of TIFF data types -.SH SYNOPSIS -.B "#include <tiffio.h>" -.sp -.BI "int TIFFDataWidth(TIFFDataType " type ")" -.SH DESCRIPTION -.I TIFFDataWidth -returns a size of -.I type -in bytes. -Currently following data types are supported: -.br -.I TIFF_BYTE -.br -.I TIFF_ASCII -.br -.I TIFF_SBYTE -.br -.I TIFF_UNDEFINED -.br -.I TIFF_SHORT -.br -.I TIFF_SSHORT -.br -.I TIFF_LONG -.br -.I TIFF_SLONG -.br -.I TIFF_FLOAT -.br -.I TIFF_IFD -.br -.I TIFF_RATIONAL -.br -.I TIFF_SRATIONAL -.br -.I TIFF_DOUBLE -.br -.SH "RETURN VALUES" -.br -.IR TIFFDataWidth -returns a number of bytes occupied by the item of given type. 0 returned when -uknown data type supplied. -.SH "SEE ALSO" -.BR libtiff (3TIFF), -.PP -Libtiff library home page: -.BR http://www.remotesensing.org/libtiff/ diff --git a/tiff/man/TIFFError.3tiff b/tiff/man/TIFFError.3tiff deleted file mode 100755 index 761ff08..0000000 --- a/tiff/man/TIFFError.3tiff +++ /dev/null @@ -1,69 +0,0 @@ -.\" $Id: TIFFError.3tiff,v 1.2 2005-11-02 11:07:18 dron Exp $ -.\" -.\" Copyright (c) 1988-1997 Sam Leffler -.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. -.\" -.\" Permission to use, copy, modify, distribute, and sell this software and -.\" its documentation for any purpose is hereby granted without fee, provided -.\" that (i) the above copyright notices and this permission notice appear in -.\" all copies of the software and related documentation, and (ii) the names of -.\" Sam Leffler and Silicon Graphics may not be used in any advertising or -.\" publicity relating to the software without the specific, prior written -.\" permission of Sam Leffler and Silicon Graphics. -.\" -.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -.\" -.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -.\" OF THIS SOFTWARE. -.\" -.if n .po 0 -.TH TIFFError 3TIFF "October 15, 1995" "libtiff" -.SH NAME -TIFFError, TIFFSetErrorHandler \- library error handling interface -.SH SYNOPSIS -.B "#include <tiffio.h>" -.sp -.BI "void TIFFError(const char *" module ", const char *" fmt ", " ... ")" -.sp -.B "#include <stdarg.h>" -.sp -.BI "typedef void (*TIFFErrorHandler)(const char *" module ", const char *" fmt ", va_list " ap ");" -.br -.B "TIFFErrorHandler TIFFSetErrorHandler(TIFFErrorHandler handler);" -.SH DESCRIPTION -.I TIFFError -invokes the library-wide error handling function to (normally) write an error -message to the -.BR stderr . -The -.I fmt -parameter is a -.IR printf (3S) -format string, and any number arguments can be supplied. The -.I module -parameter, if non-zero, is printed before the message; it typically is used to -identify the software module in which an error is detected. -.PP -Applications that desire to capture control in the event of an error should -use -.IR TIFFSetErrorHandler -to override the default error handler. -A -.SM NULL -(0) error handling function may be installed to suppress error messages. -.SH "RETURN VALUES" -.IR TIFFSetErrorHandler -returns a reference to the previous error handling function. -.SH "SEE ALSO" -.BR TIFFWarning (3TIFF), -.BR libtiff (3TIFF), -.BR printf (3) -.PP -Libtiff library home page: -.BR http://www.remotesensing.org/libtiff/ diff --git a/tiff/man/TIFFFieldDataType.3tiff b/tiff/man/TIFFFieldDataType.3tiff deleted file mode 100755 index 3efe697..0000000 --- a/tiff/man/TIFFFieldDataType.3tiff +++ /dev/null @@ -1,53 +0,0 @@ -.\" $Id: TIFFFieldDataType.3tiff,v 1.1 2012-07-29 15:45:29 tgl Exp $ -.\" -.\" Copyright (c) 2012, Tom Lane <tgl@sss.pgh.pa.us> -.\" -.\" Permission to use, copy, modify, distribute, and sell this software and -.\" its documentation for any purpose is hereby granted without fee, provided -.\" that (i) the above copyright notices and this permission notice appear in -.\" all copies of the software and related documentation, and (ii) the names of -.\" Sam Leffler and Silicon Graphics may not be used in any advertising or -.\" publicity relating to the software without the specific, prior written -.\" permission of Sam Leffler and Silicon Graphics. -.\" -.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -.\" -.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -.\" OF THIS SOFTWARE. -.\" -.if n .po 0 -.TH TIFFFieldDataType 3TIFF "July 26, 2012" "libtiff" -.SH NAME -TIFFFieldDataType \- Get TIFF data type from field information -.SH SYNOPSIS -.B "#include <tiffio.h>" -.sp -.BI "TIFFDataType TIFFFieldDataType(const TIFFField* " fip ")" -.SH DESCRIPTION -.BR TIFFFieldDataType -returns the data type stored in a TIFF field. -.P -.I fip -is a field information pointer previously returned by -.BR TIFFFindField , -.BR TIFFFieldWithTag , -or -.BR TIFFFieldWithName . -.br -.SH "RETURN VALUES" -.br -.BR TIFFFieldDataType -returns a member of the enum type -.BR TIFFDataType . -.br -.SH "SEE ALSO" -.BR libtiff (3TIFF), -.PP -Libtiff library home page: -.BR http://www.remotesensing.org/libtiff/ diff --git a/tiff/man/TIFFFieldName.3tiff b/tiff/man/TIFFFieldName.3tiff deleted file mode 100755 index 2755d18..0000000 --- a/tiff/man/TIFFFieldName.3tiff +++ /dev/null @@ -1,52 +0,0 @@ -.\" $Id: TIFFFieldName.3tiff,v 1.1 2012-07-29 15:45:29 tgl Exp $ -.\" -.\" Copyright (c) 2012, Tom Lane <tgl@sss.pgh.pa.us> -.\" -.\" Permission to use, copy, modify, distribute, and sell this software and -.\" its documentation for any purpose is hereby granted without fee, provided -.\" that (i) the above copyright notices and this permission notice appear in -.\" all copies of the software and related documentation, and (ii) the names of -.\" Sam Leffler and Silicon Graphics may not be used in any advertising or -.\" publicity relating to the software without the specific, prior written -.\" permission of Sam Leffler and Silicon Graphics. -.\" -.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -.\" -.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -.\" OF THIS SOFTWARE. -.\" -.if n .po 0 -.TH TIFFFieldName 3TIFF "July 26, 2012" "libtiff" -.SH NAME -TIFFFieldName \- Get TIFF field name from field information -.SH SYNOPSIS -.B "#include <tiffio.h>" -.sp -.BI "const char* TIFFFieldName(const TIFFField* " fip ")" -.SH DESCRIPTION -.BR TIFFFieldName -returns the textual name for a TIFF field. -.P -.I fip -is a field information pointer previously returned by -.BR TIFFFindField , -.BR TIFFFieldWithTag , -or -.BR TIFFFieldWithName . -.br -.SH "RETURN VALUES" -.br -.BR TIFFFieldName -returns a constant C string. -.br -.SH "SEE ALSO" -.BR libtiff (3TIFF), -.PP -Libtiff library home page: -.BR http://www.remotesensing.org/libtiff/ diff --git a/tiff/man/TIFFFieldPassCount.3tiff b/tiff/man/TIFFFieldPassCount.3tiff deleted file mode 100755 index 8f3c5d0..0000000 --- a/tiff/man/TIFFFieldPassCount.3tiff +++ /dev/null @@ -1,73 +0,0 @@ -.\" $Id: TIFFFieldPassCount.3tiff,v 1.1 2012-07-29 15:45:29 tgl Exp $ -.\" -.\" Copyright (c) 2012, Tom Lane <tgl@sss.pgh.pa.us> -.\" -.\" Permission to use, copy, modify, distribute, and sell this software and -.\" its documentation for any purpose is hereby granted without fee, provided -.\" that (i) the above copyright notices and this permission notice appear in -.\" all copies of the software and related documentation, and (ii) the names of -.\" Sam Leffler and Silicon Graphics may not be used in any advertising or -.\" publicity relating to the software without the specific, prior written -.\" permission of Sam Leffler and Silicon Graphics. -.\" -.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -.\" -.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -.\" OF THIS SOFTWARE. -.\" -.if n .po 0 -.TH TIFFFieldPassCount 3TIFF "July 26, 2012" "libtiff" -.SH NAME -TIFFFieldPassCount \- Get whether to pass a count to TIFFGet/SetField -.SH SYNOPSIS -.B "#include <tiffio.h>" -.sp -.BI "int TIFFFieldPassCount(const TIFFField* " fip ")" -.SH DESCRIPTION -.BR TIFFFieldPassCount -returns true (nonzero) if -.BR TIFFGetField -and -.BR TIFFSetField -expect a -.I count -value to be passed before the actual data pointer. -.P -.I fip -is a field information pointer previously returned by -.BR TIFFFindField , -.BR TIFFFieldWithTag , -or -.BR TIFFFieldWithName . -.P -When a -.I count -is required, it will be of type -.BR uint32 -when -.BR TIFFFieldReadCount -reports -.BR TIFF_VARIABLE2 , -and of type -.BR uint16 -otherwise. (This distinction is critical for use of -.BR TIFFGetField , -but normally not so for use of -.BR TIFFSetField .) -.br -.SH "RETURN VALUES" -.br -.BR TIFFFieldPassCount -returns an integer that is always 1 (true) or 0 (false). -.br -.SH "SEE ALSO" -.BR libtiff (3TIFF), -.PP -Libtiff library home page: -.BR http://www.remotesensing.org/libtiff/ diff --git a/tiff/man/TIFFFieldReadCount.3tiff b/tiff/man/TIFFFieldReadCount.3tiff deleted file mode 100755 index cdb5858..0000000 --- a/tiff/man/TIFFFieldReadCount.3tiff +++ /dev/null @@ -1,77 +0,0 @@ -.\" $Id: TIFFFieldReadCount.3tiff,v 1.1 2012-07-29 15:45:30 tgl Exp $ -.\" -.\" Copyright (c) 2012, Tom Lane <tgl@sss.pgh.pa.us> -.\" -.\" Permission to use, copy, modify, distribute, and sell this software and -.\" its documentation for any purpose is hereby granted without fee, provided -.\" that (i) the above copyright notices and this permission notice appear in -.\" all copies of the software and related documentation, and (ii) the names of -.\" Sam Leffler and Silicon Graphics may not be used in any advertising or -.\" publicity relating to the software without the specific, prior written -.\" permission of Sam Leffler and Silicon Graphics. -.\" -.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -.\" -.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -.\" OF THIS SOFTWARE. -.\" -.if n .po 0 -.TH TIFFFieldReadCount 3TIFF "July 26, 2012" "libtiff" -.SH NAME -TIFFFieldReadCount \- Get number of values to be read from field -.SH SYNOPSIS -.B "#include <tiffio.h>" -.sp -.BI "int TIFFFieldReadCount(const TIFFField* " fip ")" -.SH DESCRIPTION -.BR TIFFFieldReadCount -returns the number of values available to be read from the specified -TIFF field; that is, the number of arguments that should be supplied to -.BR TIFFGetField . -For most field types this is a small positive integer, typically 1 or 2, -but there are some special values: -.br -.BR TIFF_VARIABLE -indicates that a variable number of values is possible; then, a -.BR uint16 -.I count -argument and a pointer -.I data -argument must be supplied to -.BR TIFFGetField . -.br -.BR TIFF_VARIABLE2 -is the same as -.BR TIFF_VARIABLE -except that the -.I count -argument must have type -.BR uint32 . -.br -.BR TIFF_SPP -indicates that the number of arguments is equal to the image's -number of samples per pixel. -.P -.I fip -is a field information pointer previously returned by -.BR TIFFFindField , -.BR TIFFFieldWithTag , -or -.BR TIFFFieldWithName . -.br -.SH "RETURN VALUES" -.br -.BR TIFFFieldReadCount -returns an integer. -.br -.SH "SEE ALSO" -.BR libtiff (3TIFF), -.PP -Libtiff library home page: -.BR http://www.remotesensing.org/libtiff/ diff --git a/tiff/man/TIFFFieldTag.3tiff b/tiff/man/TIFFFieldTag.3tiff deleted file mode 100755 index bf8174e..0000000 --- a/tiff/man/TIFFFieldTag.3tiff +++ /dev/null @@ -1,56 +0,0 @@ -.\" $Id: TIFFFieldTag.3tiff,v 1.1 2012-07-29 15:45:30 tgl Exp $ -.\" -.\" Copyright (c) 2012, Tom Lane <tgl@sss.pgh.pa.us> -.\" -.\" Permission to use, copy, modify, distribute, and sell this software and -.\" its documentation for any purpose is hereby granted without fee, provided -.\" that (i) the above copyright notices and this permission notice appear in -.\" all copies of the software and related documentation, and (ii) the names of -.\" Sam Leffler and Silicon Graphics may not be used in any advertising or -.\" publicity relating to the software without the specific, prior written -.\" permission of Sam Leffler and Silicon Graphics. -.\" -.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -.\" -.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -.\" OF THIS SOFTWARE. -.\" -.if n .po 0 -.TH TIFFFieldTag 3TIFF "July 26, 2012" "libtiff" -.SH NAME -TIFFFieldTag \- Get TIFF field tag value from field information -.SH SYNOPSIS -.B "#include <tiffio.h>" -.sp -.BI "uint32 TIFFFieldTag(const TIFFField* " fip ")" -.SH DESCRIPTION -.BR TIFFFieldTag -returns the numeric tag value for a TIFF field. -This can be compared to various constants exported by the -.BR libtiff -header files, such as -.BR TIFFTAG_IMAGEWIDTH . -.P -.I fip -is a field information pointer previously returned by -.BR TIFFFindField , -.BR TIFFFieldWithTag , -or -.BR TIFFFieldWithName . -.br -.SH "RETURN VALUES" -.br -.BR TIFFFieldTag -returns an integer tag value. -.br -.SH "SEE ALSO" -.BR libtiff (3TIFF), -.PP -Libtiff library home page: -.BR http://www.remotesensing.org/libtiff/ diff --git a/tiff/man/TIFFFieldWriteCount.3tiff b/tiff/man/TIFFFieldWriteCount.3tiff deleted file mode 100755 index 6330532..0000000 --- a/tiff/man/TIFFFieldWriteCount.3tiff +++ /dev/null @@ -1,88 +0,0 @@ -.\" $Id: TIFFFieldWriteCount.3tiff,v 1.1 2012-07-29 15:45:30 tgl Exp $ -.\" -.\" Copyright (c) 2012, Tom Lane <tgl@sss.pgh.pa.us> -.\" -.\" Permission to use, copy, modify, distribute, and sell this software and -.\" its documentation for any purpose is hereby granted without fee, provided -.\" that (i) the above copyright notices and this permission notice appear in -.\" all copies of the software and related documentation, and (ii) the names of -.\" Sam Leffler and Silicon Graphics may not be used in any advertising or -.\" publicity relating to the software without the specific, prior written -.\" permission of Sam Leffler and Silicon Graphics. -.\" -.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -.\" -.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -.\" OF THIS SOFTWARE. -.\" -.if n .po 0 -.TH TIFFFieldWriteCount 3TIFF "July 26, 2012" "libtiff" -.SH NAME -TIFFFieldWriteCount \- Get number of values to be written to field -.SH SYNOPSIS -.B "#include <tiffio.h>" -.sp -.BI "int TIFFFieldWriteCount(const TIFFField* " fip ")" -.SH DESCRIPTION -.BR TIFFFieldWriteCount -returns the number of values to be written into the specified -TIFF field; that is, the number of arguments that should be supplied to -.BR TIFFSetField . -For most field types this is a small positive integer, typically 1 or 2, -but there are some special values: -.br -.BR TIFF_VARIABLE -indicates that a variable number of values is possible; then, a -.BR uint16 -.I count -argument and a pointer -.I data -argument must be supplied to -.BR TIFFSetField . -.br -.BR TIFF_VARIABLE2 -is the same as -.BR TIFF_VARIABLE -except that the -.I count -argument must have type -.BR uint32 . -(On most modern machines, this makes no practical difference, and the -.I count -argument can simply be an -.BR int -in either case.) -.br -.BR TIFF_SPP -indicates that the number of arguments must be equal to the image's -number of samples per pixel. -.P -.I fip -is a field information pointer previously returned by -.BR TIFFFindField , -.BR TIFFFieldWithTag , -or -.BR TIFFFieldWithName . -.P -For most field types, -.BR TIFFFieldWriteCount -returns the same value as -.BR TIFFFieldReadCount , -but there are some exceptions. -.br -.SH "RETURN VALUES" -.br -.BR TIFFFieldWriteCount -returns an integer. -.br -.SH "SEE ALSO" -.BR libtiff (3TIFF), -.PP -Libtiff library home page: -.BR http://www.remotesensing.org/libtiff/ diff --git a/tiff/man/TIFFFlush.3tiff b/tiff/man/TIFFFlush.3tiff deleted file mode 100755 index af32350..0000000 --- a/tiff/man/TIFFFlush.3tiff +++ /dev/null @@ -1,64 +0,0 @@ -.\" $Id: TIFFFlush.3tiff,v 1.2 2005-11-02 11:07:18 dron Exp $ -.\" -.\" Copyright (c) 1988-1997 Sam Leffler -.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. -.\" -.\" Permission to use, copy, modify, distribute, and sell this software and -.\" its documentation for any purpose is hereby granted without fee, provided -.\" that (i) the above copyright notices and this permission notice appear in -.\" all copies of the software and related documentation, and (ii) the names of -.\" Sam Leffler and Silicon Graphics may not be used in any advertising or -.\" publicity relating to the software without the specific, prior written -.\" permission of Sam Leffler and Silicon Graphics. -.\" -.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -.\" -.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -.\" OF THIS SOFTWARE. -.\" -.if n .po 0 -.TH TIFFFlush 3TIFF "December 16, 1991" "libtiff" -.SH NAME -TIFFFlush, TIFFFlushData \- flush pending writes to an open -.SM TIFF -file -.SH SYNOPSIS -.B "#include <tiffio.h>" -.sp -.BI "int TIFFFlush(TIFF *" tif ")" -.br -.BI "int TIFFFlushData(TIFF *" tif ")" -.SH DESCRIPTION -.IR TIFFFlush -causes any pending writes for the specified file (including writes for the -current directory) to be done. In normal operation this call is never needed \- -the library automatically does any flushing required. -.PP -.IR TIFFFlushData -flushes any pending image data for the specified file to be written out; -directory-related data are not flushed. In normal operation this call is never -needed \- the library automatically does any flushing required. -.SH "RETURN VALUES" -0 is returned if an error is encountered, otherwise 1 is returned. -.SH DIAGNOSTICS -All error messages are directed to the -.BR TIFFError (3TIFF) -routine. -.SH "SEE ALSO" -.BR TIFFOpen (3TIFF), -.BR TIFFWriteEncodedStrip (3TIFF), -.BR TIFFWriteEncodedTile (3TIFF), -.BR TIFFWriteRawStrip (3TIFF), -.BR TIFFWriteRawTile (3TIFF), -.BR TIFFWriteScanline (3TIFF), -.BR TIFFWriteTile (3TIFF) -.BR libtiff (3TIFF), -.PP -Libtiff library home page: -.BR http://www.remotesensing.org/libtiff/ diff --git a/tiff/man/TIFFGetField.3tiff b/tiff/man/TIFFGetField.3tiff deleted file mode 100755 index 0624ee9..0000000 --- a/tiff/man/TIFFGetField.3tiff +++ /dev/null @@ -1,229 +0,0 @@ -.\" $Id: TIFFGetField.3tiff,v 1.6 2012-05-19 23:15:22 bfriesen Exp $ -.\" -.\" Copyright (c) 1988-1997 Sam Leffler -.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. -.\" -.\" Permission to use, copy, modify, distribute, and sell this software and -.\" its documentation for any purpose is hereby granted without fee, provided -.\" that (i) the above copyright notices and this permission notice appear in -.\" all copies of the software and related documentation, and (ii) the names of -.\" Sam Leffler and Silicon Graphics may not be used in any advertising or -.\" publicity relating to the software without the specific, prior written -.\" permission of Sam Leffler and Silicon Graphics. -.\" -.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -.\" -.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -.\" OF THIS SOFTWARE. -.\" -.if n .po 0 -.TH TIFFGetField 3TIFF "March 18, 2005" "libtiff" -.SH NAME -TIFFGetField, TIFFVGetField \- get the value(s) of a tag in an open -.SM TIFF -file -.SH SYNOPSIS -.B "#include <tiffio.h>" -.sp -.BI "int TIFFGetField(TIFF *" tif ", ttag_t " tag ", " ... ")" -.sp -.B "#include <stdarg.h>" -.sp -.BI "int TIFFVGetField(TIFF *" tif ", ttag_t " tag ", va_list " ap ")" -.br -.BI "int TIFFGetFieldDefaulted(TIFF *" tif ", ttag_t " tag ", " ... ")" -.br -.BI "int TIFFVGetFieldDefaulted(TIFF *" tif ", ttag_t " tag ", va_list " ap ")" -.SH DESCRIPTION -.IR TIFFGetField -returns the value of a tag or pseudo-tag associated with the the current -directory of the opened -.SM TIFF -file -.IR tif . -(A -.I pseudo-tag -is a parameter that is used to control the operation of the -.SM TIFF -library but whose value is not read or written to the underlying file.) The -file must have been previously opened with -.IR TIFFOpen (3TIFF). -The tag is identified by -.IR tag , -one of the values defined in the include file -.B tiff.h -(see also the table below). The type and number of values returned is -dependent on the tag being requested. The programming interface uses a -variable argument list as prescribed by the -.IR stdarg (3) -interface. The returned values should only be interpreted if -.IR TIFFGetField -returns 1. -.PP -.IR TIFFVGetField -is functionally equivalent to -.IR TIFFGetField -except that it takes a pointer to a variable argument list. -.I TIFFVGetField -is useful for layering interfaces on top of the functionality provided by -.IR TIFFGetField . -.PP -.IR TIFFGetFieldDefaulted -and -.IR TIFFVGetFieldDefaulted -are identical to -.IR TIFFGetField -and -.IR TIFFVGetField , -except that if a tag is not defined in the current directory and it has a -default value, then the default value is returned. -.PP -The tags understood by -.IR libtiff(3TIFF), -the number of parameter values, and the types for the returned values are -shown below. The data types are specified as in C and correspond to the types -used to specify tag values to -.IR TIFFSetField (3TIFF). -Remember that -.IR TIFFGetField -returns parameter values, so all the listed data types are pointers to storage -where values should be returned. -Consult the -.SM TIFF -specification (or relevant industry specification) for information on the -meaning of each tag and their possible values. -.PP -.nf -.ta \w'TIFFTAG_CONSECUTIVEBADFAXLINES'u+2n +\w'Count'u+2n +\w'TIFFFaxFillFunc*'u+2n -\fITag Name\fP \fICount\fP \fITypes\fP \fINotes\fP -.sp 5p -TIFFTAG_ARTIST 1 char** -TIFFTAG_BADFAXLINES 1 uint32* -TIFFTAG_BITSPERSAMPLE 1 uint16* -TIFFTAG_CLEANFAXDATA 1 uint16* -TIFFTAG_COLORMAP 3 uint16** 1<<BitsPerSample arrays -TIFFTAG_COMPRESSION 1 uint16* -TIFFTAG_CONSECUTIVEBADFAXLINES 1 uint32* -TIFFTAG_COPYRIGHT 1 char** -TIFFTAG_DATATYPE 1 uint16* -TIFFTAG_DATETIME 1 char** -TIFFTAG_DOCUMENTNAME 1 char** -TIFFTAG_DOTRANGE 2 uint16* -TIFFTAG_EXTRASAMPLES 2 uint16*,uint16** count & types array -TIFFTAG_FAXFILLFUNC 1 TIFFFaxFillFunc* G3/G4 compression pseudo-tag -TIFFTAG_FAXMODE 1 int* G3/G4 compression pseudo-tag -TIFFTAG_FILLORDER 1 uint16* -TIFFTAG_GROUP3OPTIONS 1 uint32* -TIFFTAG_GROUP4OPTIONS 1 uint32* -TIFFTAG_HALFTONEHINTS 2 uint16* -TIFFTAG_HOSTCOMPUTER 1 char** -TIFFTAG_ICCPROFILE 2 uint32*,void** count, profile data -TIFFTAG_IMAGEDEPTH 1 uint32* -TIFFTAG_IMAGEDESCRIPTION 1 char** -TIFFTAG_IMAGELENGTH 1 uint32* -TIFFTAG_IMAGEWIDTH 1 uint32* -TIFFTAG_INKNAMES 1 char** -TIFFTAG_INKSET 1 uint16* -TIFFTAG_JPEGCOLORMODE 1 int* JPEG pseudo-tag -TIFFTAG_JPEGQUALITY 1 int* JPEG pseudo-tag -TIFFTAG_JPEGTABLES 2 uint32*,void** count & tables -TIFFTAG_JPEGTABLESMODE 1 int* JPEG pseudo-tag -TIFFTAG_MAKE 1 char** -TIFFTAG_MATTEING 1 uint16* -TIFFTAG_MAXSAMPLEVALUE 1 uint16* -TIFFTAG_MINSAMPLEVALUE 1 uint16* -TIFFTAG_MODEL 1 char** -TIFFTAG_ORIENTATION 1 uint16* -TIFFTAG_PAGENAME 1 char** -TIFFTAG_PAGENUMBER 2 uint16* -TIFFTAG_PHOTOMETRIC 1 uint16* -TIFFTAG_PHOTOSHOP 2 uint32*,void** count, data -TIFFTAG_PLANARCONFIG 1 uint16* -TIFFTAG_PREDICTOR 1 uint16* -TIFFTAG_PRIMARYCHROMATICITIES 1 float** 6-entry array -TIFFTAG_REFERENCEBLACKWHITE 1 float** 6-entry array -TIFFTAG_RESOLUTIONUNIT 1 uint16* -TIFFTAG_RICHTIFFIPTC 2 uint32*,void** count, data -TIFFTAG_ROWSPERSTRIP 1 uint32* -TIFFTAG_SAMPLEFORMAT 1 uint16* -TIFFTAG_SAMPLESPERPIXEL 1 uint16* -TIFFTAG_SMAXSAMPLEVALUE 1 double* -TIFFTAG_SMINSAMPLEVALUE 1 double* -TIFFTAG_SOFTWARE 1 char** -TIFFTAG_STONITS 1 double** -TIFFTAG_STRIPBYTECOUNTS 1 uint32** -TIFFTAG_STRIPOFFSETS 1 uint32** -TIFFTAG_SUBFILETYPE 1 uint32* -TIFFTAG_SUBIFD 2 uint16*,uint32** count & offsets array -TIFFTAG_TARGETPRINTER 1 char** -TIFFTAG_THRESHHOLDING 1 uint16* -TIFFTAG_TILEBYTECOUNTS 1 uint32** -TIFFTAG_TILEDEPTH 1 uint32* -TIFFTAG_TILELENGTH 1 uint32* -TIFFTAG_TILEOFFSETS 1 uint32** -TIFFTAG_TILEWIDTH 1 uint32* -TIFFTAG_TRANSFERFUNCTION 1 or 3\(dg uint16**1<<BitsPerSample entry arrays -TIFFTAG_WHITEPOINT 1 float** 2-entry array -TIFFTAG_XMLPACKET 2 uint32*,void** count, data -TIFFTAG_XPOSITION 1 float* -TIFFTAG_XRESOLUTION 1 float* -TIFFTAG_YCBCRCOEFFICIENTS 1 float** 3-entry array -TIFFTAG_YCBCRPOSITIONING 1 uint16* -TIFFTAG_YCBCRSUBSAMPLING 2 uint16* -TIFFTAG_YPOSITION 1 float* -TIFFTAG_YRESOLUTION 1 float*\(dd -.fi -\(dg If -.I SamplesPerPixel -is one, then a single array is returned; otherwise three arrays are returned. -.fi -\(dd The contents of this field are quite complex. See -.IR "The ICC Profile Format Specification" , -Annex B.3 "Embedding ICC Profiles in TIFF Files" (available at -http://www.color.org) for an explanation. -.SH AUTOREGISTERED TAGS -If you can't find the tag in the table above that means this is an unsupported -tag and is not directly supported by -.BR libtiff(3TIFF) -library. You will still be able to read it's value if you know the data type of -that tag. For example, if you want to read the LONG value from the tag 33424 -and ASCII string from the tag 36867 you can use the following code: -.PP -.RS -.nf -uint32 count; -void *data; - -TIFFGetField(tiff, 33424, &count, &data); -printf("Tag %d: %d, count %d\n", 33424, *(uint32 *)data, count); -TIFFGetField(tiff, 36867, &count, &data); -printf("Tag %d: %s, count %d\n", 36867, (char *)data, count); -.fi -.RE -.PP -.SH RETURN VALUES -1 is returned if the tag is defined in the current directory; otherwise a 0 is -returned. -.SH DIAGNOSTICS -All error messages are directed to the -.BR TIFFError (3TIFF) -routine. -.PP -.BR "Unknown field, tag 0x%x" . -An unknown tag was supplied. -.SH "SEE ALSO" -.BR TIFFOpen (3TIFF), -.BR TIFFSetField (3TIFF), -.BR TIFFSetDirectory (3TIFF), -.BR TIFFReadDirectory (3TIFF), -.BR TIFFWriteDirectory (3TIFF) -.BR libtiff (3TIFF), -.PP -Libtiff library home page: -.BR http://www.remotesensing.org/libtiff/ diff --git a/tiff/man/TIFFOpen.3tiff b/tiff/man/TIFFOpen.3tiff deleted file mode 100755 index f420931..0000000 --- a/tiff/man/TIFFOpen.3tiff +++ /dev/null @@ -1,279 +0,0 @@ -.\" $Id: TIFFOpen.3tiff,v 1.2 2005-07-01 12:36:22 dron Exp $ -.\" -.\" Copyright (c) 1988-1997 Sam Leffler -.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. -.\" -.\" Permission to use, copy, modify, distribute, and sell this software and -.\" its documentation for any purpose is hereby granted without fee, provided -.\" that (i) the above copyright notices and this permission notice appear in -.\" all copies of the software and related documentation, and (ii) the names of -.\" Sam Leffler and Silicon Graphics may not be used in any advertising or -.\" publicity relating to the software without the specific, prior written -.\" permission of Sam Leffler and Silicon Graphics. -.\" -.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -.\" -.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -.\" OF THIS SOFTWARE. -.\" -.if n .po 0 -.TH TIFFOpen 3TIFF "July 1, 2005" "libtiff" -.SH NAME -TIFFOpen, TIFFFdOpen, TIFFClientOpen \- open a -.SM TIFF -file for reading or writing -.SH SYNOPSIS -.B "#include <tiffio.h>" -.sp -.BI "TIFF* TIFFOpen(const char *" filename ", const char *" mode ")" -.br -.BI "TIFF* TIFFFdOpen(const int " fd ", const char *" filename ", const char *" mode ")" -.sp -.B "typedef tsize_t (*TIFFReadWriteProc)(thandle_t, tdata_t, tsize_t);" -.br -.B "typedef toff_t (*TIFFSeekProc)(thandle_t, toff_t, int);" -.br -.B "typedef int (*TIFFCloseProc)(thandle_t);" -.br -.B "typedef toff_t (*TIFFSizeProc)(thandle_t);" -.br -.B "typedef int (*TIFFMapFileProc)(thandle_t, tdata_t*, toff_t*);" -.br -.B "typedef void (*TIFFUnmapFileProc)(thandle_t, tdata_t, toff_t);" -.sp -.BI "TIFF* TIFFClientOpen(const char *" filename ", const char *" mode ", thandle_t " clientdata ", TIFFReadWriteProc " readproc ", TIFFReadWriteProc " writeproc ", TIFFSeekProc " seekproc ", TIFFCloseProc " closeproc ", TIFFSizeProc " sizeproc ", TIFFMapFileProc " mapproc ", TIFFUnmapFileProc " unmapproc ")" -.SH DESCRIPTION -.IR TIFFOpen -opens a -.SM TIFF -file whose name is -.I filename -and returns a handle to be used in subsequent calls to routines in -.IR libtiff . -If the open operation fails, then zero is returned. -The -.I mode -parameter specifies if the file is to be opened for reading (``r''), -writing (``w''), or appending (``a'') and, optionally, whether -to override certain default aspects of library operation (see below). -When a file is opened for appending, existing data will not -be touched; instead new data will be written as additional subfiles. -If an existing file is opened for writing, all previous data is -overwritten. -.PP -If a file is opened for reading, the first -.SM TIFF -directory in the file is automatically read -(also see -.IR TIFFSetDirectory (3TIFF) -for reading directories other than the first). -If a file is opened for writing or appending, a default directory -is automatically created for writing subsequent data. -This directory has all the default values specified in -.SM TIFF -Revision 6.0: -.IR BitsPerSample =1, -.IR ThreshHolding "=bilevel art scan," -.IR FillOrder =1 -(most significant bit of each data byte is filled first), -.IR Orientation =1 -(the 0th row represents the visual top of the image, and the 0th -column represents the visual left hand side), -.IR SamplesPerPixel =1, -.IR RowsPerStrip =infinity, -.IR ResolutionUnit =2 -(inches), and -.IR Compression =1 -(no compression). -To alter these values, or to define values for additional fields, -.IR TIFFSetField (3TIFF) -must be used. -.PP -.IR TIFFFdOpen -is like -.IR TIFFOpen -except that it opens a -.SM TIFF -file given an open file descriptor -.IR fd . -The file's name and mode must reflect that of the open descriptor. -The object associated with the file descriptor -.BR "must support random access" . -.PP -.IR TIFFClientOpen -is like -.IR TIFFOpen -except that the caller supplies a collection of functions that the -library will use to do \s-1UNIX\s+1-like I/O operations. -The -.I readproc -and -.I writeproc -are called to read and write data at the current file position. -.I seekproc -is called to change the current file position a la -.IR lseek (2). -.I closeproc -is invoked to release any resources associated with an open file. -.I sizeproc -is invoked to obtain the size in bytes of a file. -.I mapproc -and -.I unmapproc -are called to map and unmap a file's contents in memory; c.f. -.IR mmap (2) -and -.IR munmap (2). -The -.I clientdata -parameter is an opaque ``handle'' passed to the client-specified -routines passed as parameters to -.IR TIFFClientOpen . -.SH OPTIONS -The open mode parameter can include the following flags in -addition to the ``r'', ``w'', and ``a'' flags. -Note however that option flags must follow the read-write-append -specification. -.TP -.B l -When creating a new file force information be written with -Little-Endian byte order (but see below). -By default the library will create new files using the native -.SM CPU -byte order. -.TP -.B b -When creating a new file force information be written with -Big-Endian byte order (but see below). -By default the library will create new files using the native -.SM CPU -byte order. -.TP -.B L -Force image data that is read or written to be treated with -bits filled from Least Significant Bit (\s-1LSB\s+1) to -Most Significant Bit (\s-1MSB\s+1). -Note that this is the opposite to the way the library has -worked from its inception. -.TP -.B B -Force image data that is read or written to be treated with -bits filled from Most Significant Bit (\s-1MSB\s+1) to -Least Significant Bit (\s-1LSB\s+1); this is the default. -.TP -.B H -Force image data that is read or written to be treated with -bits filled in the same order as the native -.SM CPU. -.TP -.B M -Enable the use of memory-mapped files for images opened read-only. -If the underlying system does not support memory-mapped files -or if the specific image being opened cannot be memory-mapped -then the library will fallback to using the normal system interface -for reading information. -By default the library will attempt to use memory-mapped files. -.TP -.B m -Disable the use of memory-mapped files. -.TP -.B C -Enable the use of ``strip chopping'' when reading images -that are comprised of a single strip or tile of uncompressed data. -Strip chopping is a mechanism by which the library will automatically -convert the single-strip image to multiple strips, -each of which has about 8 Kilobytes of data. -This facility can be useful in reducing the amount of memory used -to read an image because the library normally reads each strip -in its entirety. -Strip chopping does however alter the apparent contents of the -image because when an image is divided into multiple strips it -looks as though the underlying file contains multiple separate -strips. -Finally, note that default handling of strip chopping is a compile-time -configuration parameter. -The default behaviour, for backwards compatibility, is to enable -strip chopping. -.TP -.B c -Disable the use of strip chopping when reading images. -.TP -.B h -Read TIFF header only, do not load the first image directory. That could be -useful in case of the broken first directory. We can open the file and proceed -to the other directories. -.SH "BYTE ORDER" -The -.SM TIFF -specification (\fBall versions\fP) states that compliant readers -.IR "must be capable of reading images written in either byte order" . -Nonetheless some software that claims to support the reading of -.SM TIFF -images is incapable of reading images in anything but the native -.SM CPU -byte order on which the software was written. -(Especially notorious -are applications written to run on Intel-based machines.) -By default the library will create new files with the native -byte-order of the -.SM CPU -on which the application is run. -This ensures optimal performance and is portable to any application -that conforms to the TIFF specification. -To force the library to use a specific byte-order when creating -a new file the ``b'' and ``l'' option flags may be included in -the call to open a file; for example, ``wb'' or ``wl''. -.SH "RETURN VALUES" -Upon successful completion -.IR TIFFOpen , -.IR TIFFFdOpen , -and -.IR TIFFClientOpen -return a -.SM TIFF -pointer. -Otherwise, NULL is returned. -.SH DIAGNOSTICS -All error messages are directed to the -.IR TIFFError (3TIFF) -routine. -Likewise, warning messages are directed to the -.IR TIFFWarning (3TIFF) -routine. -.PP -\fB"%s": Bad mode\fP. -The specified -.I mode -parameter was not one of ``r'' (read), ``w'' (write), or ``a'' (append). -.PP -.BR "%s: Cannot open" . -.IR TIFFOpen () -was unable to open the specified filename for read/writing. -.PP -.BR "Cannot read TIFF header" . -An error occurred while attempting to read the header information. -.PP -.BR "Error writing TIFF header" . -An error occurred while writing the default header information -for a new file. -.PP -.BR "Not a TIFF file, bad magic number %d (0x%x)" . -The magic number in the header was not (hex) -0x4d4d or (hex) 0x4949. -.PP -.BR "Not a TIFF file, bad version number %d (0x%x)" . -The version field in the header was not 42 (decimal). -.PP -.BR "Cannot append to file that has opposite byte ordering" . -A file with a byte ordering opposite to the native byte -ordering of the current machine was opened for appending (``a''). -This is a limitation of the library. -.SH "SEE ALSO" -.IR libtiff (3TIFF), -.IR TIFFClose (3TIFF) diff --git a/tiff/man/TIFFPrintDirectory.3tiff b/tiff/man/TIFFPrintDirectory.3tiff deleted file mode 100755 index 437b09e..0000000 --- a/tiff/man/TIFFPrintDirectory.3tiff +++ /dev/null @@ -1,70 +0,0 @@ -.\" $Id: TIFFPrintDirectory.3tiff,v 1.1 2004-11-11 14:39:16 dron Exp $ -.\" -.\" Copyright (c) 1991-1997 Sam Leffler -.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. -.\" -.\" Permission to use, copy, modify, distribute, and sell this software and -.\" its documentation for any purpose is hereby granted without fee, provided -.\" that (i) the above copyright notices and this permission notice appear in -.\" all copies of the software and related documentation, and (ii) the names of -.\" Sam Leffler and Silicon Graphics may not be used in any advertising or -.\" publicity relating to the software without the specific, prior written -.\" permission of Sam Leffler and Silicon Graphics. -.\" -.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -.\" -.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -.\" OF THIS SOFTWARE. -.\" -.if n .po 0 -.TH TIFFPrintDirectory 3TIFF "December 12, 1991" "libtiff" -.SH NAME -TIFFPrintDirectory \- print a description of a -.SM TIFF -directory -.SH SYNOPSIS -.B "#include <tiffio.h>" -.sp -.BI "void TIFFPrintDirectory(TIFF *" tif ", FILE *" fd ", long " flags ")" -.SH DESCRIPTION -.I TIFFPrintDirectory -prints a description of the current directory in the specified -.SM TIFF -file to the standard I/O output stream -.IR fd . -The -.I flags -parameter is used to control the -.I "level of detail" -of the printed information; it is a bit-or of the flags defined in -.BR tiffio.h : -.sp .5 -.nf -.ta \w'#define 'u +\w'TIFFPRINT_JPEGDCTABLES 'u +\w'0x200 'u -#define TIFFPRINT_NONE 0x0 /* no extra info */ -#define TIFFPRINT_STRIPS 0x1 /* strips/tiles info */ -#define TIFFPRINT_CURVES 0x2 /* color/gray response curves */ -#define TIFFPRINT_COLORMAP 0x4 /* colormap */ -#define TIFFPRINT_JPEGQTABLES 0x100 /* JPEG Q matrices */ -#define TIFFPRINT_JPEGACTABLES 0x200 /* JPEG AC tables */ -#define TIFFPRINT_JPEGDCTABLES 0x200 /* JPEG DC tables */ -.fi -.SH NOTES -In C++ the -.I flags -parameter defaults to 0. -.SH "RETURN VALUES" -None. -.SH DIAGNOSTICS -None. -.SH "SEE ALSO" -.IR libtiff (3TIFF), -.IR TIFFOpen (3TIFF), -.IR TIFFReadDirectory (3TIFF), -.IR TIFFSetDirectory (3TIFF) diff --git a/tiff/man/TIFFRGBAImage.3tiff b/tiff/man/TIFFRGBAImage.3tiff deleted file mode 100755 index ef1a85c..0000000 --- a/tiff/man/TIFFRGBAImage.3tiff +++ /dev/null @@ -1,286 +0,0 @@ -.\" $Id: TIFFRGBAImage.3tiff,v 1.2 2005-11-02 11:07:18 dron Exp $ -.\" -.\" Copyright (c) 1991-1997 Sam Leffler -.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. -.\" -.\" Permission to use, copy, modify, distribute, and sell this software and -.\" its documentation for any purpose is hereby granted without fee, provided -.\" that (i) the above copyright notices and this permission notice appear in -.\" all copies of the software and related documentation, and (ii) the names of -.\" Sam Leffler and Silicon Graphics may not be used in any advertising or -.\" publicity relating to the software without the specific, prior written -.\" permission of Sam Leffler and Silicon Graphics. -.\" -.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -.\" -.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -.\" OF THIS SOFTWARE. -.\" -.if n .po 0 -.TH TIFFRGBAImage 3TIFF "October 29, 2004" "libtiff" -.SH NAME -TIFFRGBAImageOK, TIFFRGBAImageBegin, TIFFRGBAImageGet, TIFFRGBAImageEnd -\- read and decode an image into a raster -.SH SYNOPSIS -.B "#include <tiffio.h>" -.sp -.B "typedef unsigned char TIFFRGBValue;" -.B "typedef struct _TIFFRGBAImage TIFFRGBAImage;" -.sp -.BI "int TIFFRGBAImageOK(TIFF *" tif ", char " emsg[1024] ")" -.br -.BI "int TIFFRGBAImageBegin(TIFFRGBAImage *" img ", TIFF* " tif ", int " stopOnError ", char " emsg[1024] ")" -.br -.BI "int TIFFRGBAImageGet(TIFFRGBAImage *" img ", uint32* " raster ", uint32 " width " , uint32 " height ")" -.br -.BI "void TIFFRGBAImageEnd(TIFFRGBAImage *" img ")" -.br -.SH DESCRIPTION -The routines described here provide a high-level interface -through which -.SM TIFF -images may be read into memory. -Images may be strip- or tile-based and have a variety of different -characteristics: bits/sample, samples/pixel, photometric, etc. -Decoding state is encapsulated in a -.I TIFFRGBAImage -structure making it possible to capture state for multiple images -and quickly switch between them. -The target raster format can be customized to a particular application's -needs by installing custom routines that manipulate image data -according to application requirements. -.PP -The default usage for these routines is: check if an image can -be processed using -.IR TIFFRGBAImageOK , -construct a decoder state block using -.IR TIFFRGBAImageBegin , -read and decode an image into a target raster using -.IR TIFFRGBAImageGet , -and then -release resources using -.IR TIFFRGBAImageEnd . -.I TIFFRGBAImageGet -can be called multiple times to decode an image using different -state parameters. -If multiple images are to be displayed and there is not enough -space for each of the decoded rasters, multiple state blocks can -be managed and then calls can be made to -.I TIFFRGBAImageGet -as needed to display an image. -.PP -The generated raster is assumed to be an array of -.I width -times -.I height -32-bit entries, where -.I width -must be less than or equal to the width of the image (\c -.I height -may be any non-zero size). -If the raster dimensions are smaller than the image, the image data -is cropped to the raster bounds. -If the raster height is greater than that of the image, then the -image data are placed in the lower part of the raster. -(Note that the raster is assume to be organized such that the pixel -at location (\fIx\fP,\fIy\fP) is \fIraster\fP[\fIy\fP*\fIwidth\fP+\fIx\fP]; -with the raster origin in the -.B lower-left -hand corner.) -.PP -Raster pixels are 8-bit packed red, green, blue, alpha samples. -The macros -.IR TIFFGetR , -.IR TIFFGetG , -.IR TIFFGetB , -and -.I TIFFGetA -should be used to access individual samples. -Images without Associated Alpha matting information have a constant -Alpha of 1.0 (255). -.PP -.I TIFFRGBAImageGet -converts non-8-bit images by scaling sample values. -Palette, grayscale, bilevel, -.SM CMYK\c -, and YCbCr images are converted to -.SM RGB -transparently. -Raster pixels are returned uncorrected by any colorimetry information -present in the directory. -.PP -The parameter -.I stopOnError -specifies how to act if an error is encountered while reading -the image. -If -.I stopOnError -is non-zero, then an error will terminate the operation; otherwise -.I TIFFRGBAImageGet -will continue processing data until all the possible data in the -image have been requested. -.SH "ALTERNATE RASTER FORMATS" -To use the core support for reading and processing -.SM TIFF -images, but write the resulting raster data in a different format -one need only override the ``\fIput methods\fP'' used to store raster data. -These methods are are defined in the -.I TIFFRGBAImage -structure and initially setup by -.I TIFFRGBAImageBegin -to point to routines that pack raster data in the default -.SM ABGR -pixel format. -Two different routines are used according to the physical organization -of the image data in the file: -.IR PlanarConfiguration =1 -(packed samples), -and -.IR PlanarConfiguration =2 -(separated samples). -Note that this mechanism can be used to transform the data before -storing it in the raster. -For example one can convert data -to colormap indices for display on a colormap display. -.SH "SIMULTANEOUS RASTER STORE AND DISPLAY" -It is simple to display an image as it is being read into memory -by overriding the put methods as described above for supporting -alternate raster formats. -Simply keep a reference to the default put methods setup by -.I TIFFRGBAImageBegin -and then invoke them before or after each display operation. -For example, the -.IR tiffgt (1) -utility uses the following put method to update the display as -the raster is being filled: -.sp -.nf -.ft C -static void -putContigAndDraw(TIFFRGBAImage* img, uint32* raster, - uint32 x, uint32 y, uint32 w, uint32 h, - int32 fromskew, int32 toskew, - unsigned char* cp) -{ - (*putContig)(img, raster, x, y, w, h, fromskew, toskew, cp); - if (x+w == width) { - w = width; - if (img->orientation == ORIENTATION_TOPLEFT) - lrectwrite(0, y-(h-1), w-1, y, raster-x-(h-1)*w); - else - lrectwrite(0, y, w-1, y+h-1, raster); - } -} -.ft R -.fi -.sp -(the original routine provided by the library is saved in the -variable -.IR putContig .) -.SH "SUPPORTING ADDITIONAL TIFF FORMATS" -The -.I TIFFRGBAImage -routines support the most commonly encountered flavors of -.SM TIFF. -It is possible to extend this support by overriding the ``\fIget method\fP'' -invoked by -.I TIFFRGBAImageGet -to read -.SM TIFF -image data. -Details of doing this are a bit involved, it is best to make a copy -of an existing get method and modify it to suit the needs of an -application. -.SH NOTES -Samples must be either 1, 2, 4, 8, or 16 bits. -Colorimetric samples/pixel must be either 1, 3, or 4 (i.e. -.I SamplesPerPixel -minus -.IR ExtraSamples ). -.PP -Palette image colormaps that appear to be incorrectly written -as 8-bit values are automatically scaled to 16-bits. -.SH "RETURN VALUES" -All routines return -1 if the operation was successful. -Otherwise, 0 is returned if an error was encountered and -.I stopOnError -is zero. -.SH DIAGNOSTICS -All error messages are directed to the -.IR TIFFError (3TIFF) -routine. -.PP -.BR "Sorry, can not handle %d-bit pictures" . -The image had -.I BitsPerSample -other than 1, 2, 4, 8, or 16. -.PP -.BR "Sorry, can not handle %d-channel images" . -The image had -.I SamplesPerPixel -other than 1, 3, or 4. -.PP -\fBMissing needed "PhotometricInterpretation" tag\fP. -The image did not have a tag that describes how to display -the data. -.PP -\fBNo "PhotometricInterpretation" tag, assuming RGB\fP. -The image was missing a tag that describes how to display it, -but because it has 3 or 4 samples/pixel, it is assumed to be -.SM RGB. -.PP -\fBNo "PhotometricInterpretation" tag, assuming min-is-black\fP. -The image was missing a tag that describes how to display it, -but because it has 1 sample/pixel, it is assumed to be a grayscale -or bilevel image. -.PP -.BR "No space for photometric conversion table" . -There was insufficient memory for a table used to convert -image samples to 8-bit -.SM RGB. -.PP -\fBMissing required "Colormap" tag\fP. -A Palette image did not have a required -.I Colormap -tag. -.PP -.BR "No space for tile buffer" . -There was insufficient memory to allocate an i/o buffer. -.PP -.BR "No space for strip buffer" . -There was insufficient memory to allocate an i/o buffer. -.PP -.BR "Can not handle format" . -The image has a format (combination of -.IR BitsPerSample , -.IR SamplesPerPixel , -and -.IR PhotometricInterpretation ) -that can not be handled. -.PP -.BR "No space for B&W mapping table" . -There was insufficient memory to allocate a table used to map -grayscale data to -.SM RGB. -.PP -.BR "No space for Palette mapping table" . -There was insufficient memory to allocate a table used to map -data to 8-bit -.SM RGB. -.SH "SEE ALSO" -.BR TIFFOpen (3TIFF), -.BR TIFFReadRGBAImage (3TIFF), -.BR TIFFReadRGBAImageOriented (3TIFF), -.BR TIFFReadRGBAStrip (3TIFF), -.BR TIFFReadRGBATile (3TIFF), -.BR libtiff (3TIFF) -.PP -Libtiff library home page: -.BR http://www.remotesensing.org/libtiff/ diff --git a/tiff/man/TIFFReadDirectory.3tiff b/tiff/man/TIFFReadDirectory.3tiff deleted file mode 100755 index 000bf0a..0000000 --- a/tiff/man/TIFFReadDirectory.3tiff +++ /dev/null @@ -1,164 +0,0 @@ -.\" $Id: TIFFReadDirectory.3tiff,v 1.3 2010-12-12 01:45:35 faxguy Exp $ -.\" -.\" Copyright (c) 1988-1997 Sam Leffler -.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. -.\" -.\" Permission to use, copy, modify, distribute, and sell this software and -.\" its documentation for any purpose is hereby granted without fee, provided -.\" that (i) the above copyright notices and this permission notice appear in -.\" all copies of the software and related documentation, and (ii) the names of -.\" Sam Leffler and Silicon Graphics may not be used in any advertising or -.\" publicity relating to the software without the specific, prior written -.\" permission of Sam Leffler and Silicon Graphics. -.\" -.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -.\" -.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -.\" OF THIS SOFTWARE. -.\" -.if n .po 0 -.TH TIFFReadDirectory 3TIFF "October 15, 1995" "libtiff" -.SH NAME -TIFFReadDirectory \- get the contents of the next directory in an open -.SM TIFF -file -.SH SYNOPSIS -.B "#include <tiffio.h>" -.sp -.BI "int TIFFReadDirectory(TIFF *" tif ")" -.SH DESCRIPTION -Read the next directory in the specified file and make it the current -directory. Applications only need to call -.I TIFFReadDirectory -to read multiple subfiles in a single -.SM TIFF -file\(em -the first directory in a file is automatically read when -.IR TIFFOpen -is called. -.SH NOTES -If the library is compiled with -.SM STRIPCHOP_SUPPORT -enabled, then images that have a single uncompressed strip or tile of data are -automatically treated as if they were made up of multiple strips or tiles of -approximately 8 kilobytes each. This operation is done only in-memory; it does -not alter the contents of the file. However, the construction of the ``chopped -strips'' is visible to the application through the number of strips [tiles] -returned by -.I TIFFNumberOfStrips -[\c -.IR TIFFNumberOfTiles ]. -.SH "RETURN VALUES" -If the next directory was successfully read, 1 is returned. Otherwise, 0 is -returned if an error was encountered, or if there are no more directories to -be read. -.SH DIAGNOSTICS -All error messages are directed to the -.IR TIFFError (3TIFF) -routine. -All warning messages are directed to the -.IR TIFFWarning (3TIFF) -routine. -.PP -\fBSeek error accessing TIFF directory\fP. -An error occurred while positioning to the location of the -directory. -.PP -\fBWrong data type %d for field "%s"\fP. -The tag entry in the directory had an incorrect data type. -For example, an -.I ImageDescription -tag with a -.SM SHORT -data type. -.PP -\fBTIFF directory is missing required "%s" field\fP. -The specified tag is required to be present by the -.SM TIFF -5.0 specification, but is missing. -The directory is (usually) unusable. -.PP -\fB%s: Rational with zero denominator\fP. -A directory tag has a -.SM RATIONAL -value whose denominator is zero. -.PP -\fBIncorrect count %d for field "%s" (%lu, expecting %lu); tag ignored\fP. -The specified tag's count field is bad. -For example, a count other than 1 for a -.I SubFileType -tag. -.PP -\fBCannot handle different per-sample values for field "%s"\fP. -The tag has -.I SamplesPerPixel -values and they are not all the same; e.g. -.IR BitsPerSample . -The library is unable to handle images of this sort. -.PP -\fBCount mismatch for field "%s"; expecting %d, got %d\fP. -The count field in a -tag does not agree with the number expected by the library. -This should never happen, so if it does, the library refuses to -read the directory. -.PP -\fBInvalid TIFF directory; tags are not sorted in ascending order\fP. -The directory tags are not properly sorted as specified -in the -.SM TIFF -5.0 specification. -This error is not fatal. -.PP -\fBIgnoring unknown field with tag %d (0x%x)\fP. -An unknown tag was encountered in the directory; -the library ignores all such tags. -.PP -\fBTIFF directory is missing required "ImageLength" field\fP. -The image violates the specification by not having a necessary field. -There is no way for the library to recover from this error. -.PP -\fBTIFF directory is missing required "PlanarConfig" field\fP. -The image violates the specification by not having a necessary field. -There is no way for the library to recover from this error. -.PP -\fBTIFF directory is missing required "StripOffsets" field\fP. -The image has multiple strips, but is missing the tag that -specifies the file offset to each strip of data. -There is no way for the library to recover from this error. -.PP -\fBTIFF directory is missing required "TileOffsets" field\fP. -The image has multiple tiles, but is missing the tag that -specifies the file offset to each tile of data. -There is no way for the library to recover from this error. -.PP -\fBTIFF directory is missing required "StripByteCounts" field\fP. -The image has multiple strips, but is missing the tag that -specifies the size of each strip of data. -There is no way for the library to recover from this error. -.PP -\fBTIFF directory is missing required "StripByteCounts" field, calculating from imagelength\fP. -The image violates the specification by not having a necessary field. -However, when the image is comprised of only one strip or tile, the -library will estimate the missing value based on the file size. -.PP -\fBBogus "StripByteCounts" field, ignoring and calculating from imagelength\fP. -Certain vendors violate the specification by writing zero for -the StripByteCounts tag when they want to leave the value -unspecified. -If the image has a single strip, the library will estimate -the missing value based on the file size. -.SH "SEE ALSO" -.BR TIFFOpen (3TIFF), -.BR TIFFWriteDirectory (3TIFF), -.BR TIFFSetDirectory (3TIFF), -.BR TIFFSetSubDirectory (3TIFF), -.BR libtiff (3TIFF) -.PP -Libtiff library home page: -.BR http://www.remotesensing.org/libtiff/ diff --git a/tiff/man/TIFFReadEncodedStrip.3tiff b/tiff/man/TIFFReadEncodedStrip.3tiff deleted file mode 100755 index d2d7b67..0000000 --- a/tiff/man/TIFFReadEncodedStrip.3tiff +++ /dev/null @@ -1,78 +0,0 @@ -.\" $Id: TIFFReadEncodedStrip.3tiff,v 1.2 2005-11-02 11:07:18 dron Exp $ -.\" -.\" Copyright (c) 1988-1997 Sam Leffler -.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. -.\" -.\" Permission to use, copy, modify, distribute, and sell this software and -.\" its documentation for any purpose is hereby granted without fee, provided -.\" that (i) the above copyright notices and this permission notice appear in -.\" all copies of the software and related documentation, and (ii) the names of -.\" Sam Leffler and Silicon Graphics may not be used in any advertising or -.\" publicity relating to the software without the specific, prior written -.\" permission of Sam Leffler and Silicon Graphics. -.\" -.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -.\" -.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -.\" OF THIS SOFTWARE. -.\" -.if n .po 0 -.TH TIFFReadEncodedStrip 3TIFF "October 15, 1995" "libtiff" -.SH NAME -TIFFReadEncodedStrip \- read and decode a strip of data from an open -.SM TIFF -file -.SH SYNOPSIS -.B "#include <tiffio.h>" -.sp -.BI "tsize_t TIFFReadEncodedStrip(TIFF *" tif ", tstrip_t " strip ", tdata_t " buf ", tsize_t " size ")" -.SH DESCRIPTION -Read the specified strip of data and place up to -.I size -bytes of decompressed information in the (user supplied) data buffer. -.SH NOTES -The value of -.I strip -is a ``raw strip number.'' -That is, the caller must take into account whether or not the data are -organized in separate planes (\c -.IR PlanarConfiguration =2). -To read a full strip of data the data buffer should typically be at least as -large as the number returned by -.BR TIFFStripSize (3TIFF). -If the -1 passed in -.I size -parameter, the whole strip will be read. You should be sure you have enough -space allocated for the buffer. -.PP -The library attempts to hide bit- and byte-ordering differences between the -image and the native machine by converting data to the native machine order. -Bit reversal is done if the -.I FillOrder -tag is opposite to the native machine bit order. 16- and 32-bit samples are -automatically byte-swapped if the file was written with a byte order opposite -to the native machine byte order, -.SH "RETURN VALUES" -The actual number of bytes of data that were placed in -.I buf -is returned; -.IR TIFFReadEncodedStrip -returns \-1 if an error was encountered. -.SH DIAGNOSTICS -All error messages are directed to the -.BR TIFFError (3TIFF) -routine. -.SH "SEE ALSO" -.BR TIFFOpen (3TIFF), -.BR TIFFReadRawStrip (3TIFF), -.BR TIFFReadScanline (3TIFF), -.BR libtiff (3TIFF) -.PP -Libtiff library home page: -.BR http://www.remotesensing.org/libtiff/ diff --git a/tiff/man/TIFFReadEncodedTile.3tiff b/tiff/man/TIFFReadEncodedTile.3tiff deleted file mode 100755 index 5f6d900..0000000 --- a/tiff/man/TIFFReadEncodedTile.3tiff +++ /dev/null @@ -1,76 +0,0 @@ -.\" $Id: TIFFReadEncodedTile.3tiff,v 1.3 2006-10-13 07:22:01 dron Exp $ -.\" -.\" Copyright (c) 1988-1997 Sam Leffler -.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. -.\" -.\" Permission to use, copy, modify, distribute, and sell this software and -.\" its documentation for any purpose is hereby granted without fee, provided -.\" that (i) the above copyright notices and this permission notice appear in -.\" all copies of the software and related documentation, and (ii) the names of -.\" Sam Leffler and Silicon Graphics may not be used in any advertising or -.\" publicity relating to the software without the specific, prior written -.\" permission of Sam Leffler and Silicon Graphics. -.\" -.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -.\" -.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -.\" OF THIS SOFTWARE. -.\" -.if n .po 0 -.TH TIFFReadEncodedTile 3TIFF "October 13, 2006" "libtiff" -.SH NAME -TIFFReadEncodedTile \- read and decode a tile of data from an open -.SM TIFF -file -.SH SYNOPSIS -.B "#include <tiffio.h>" -.sp -.BI "int TIFFReadEncodedTile(TIFF *" tif ", ttile_t " tile ", tdata_t " buf ", tsize_t " size ")" -.SH DESCRIPTION -Read the specified tile of data and place up to -.I size -bytes of decompressed information in the (user supplied) data buffer. -.SH NOTES -The value of -.I tile -is a ``raw tile number.'' -That is, the caller must take into account whether or not the data are -organized in separate planes (\c -.IR PlanarConfiguration =2). -.IR TIFFComputeTile -automatically does this when converting an (x,y,z,sample) coordinate quadruple -to a tile number. To read a full tile of data the data buffer should be at -least as large as the value returned by -.IR TIFFTileSize . -.PP -The library attempts to hide bit- and byte-ordering differences between the -image and the native machine by converting data to the native machine order. -Bit reversal is done if the -.I FillOrder -tag is opposite to the native machine bit order. 16- and 32-bit samples are -automatically byte-swapped if the file was written with a byte order opposite -to the native machine byte order, -.SH "RETURN VALUES" -The actual number of bytes of data that were placed in -.I buf -is returned; -.IR TIFFReadEncodedTile -returns \-1 if an error was encountered. -.SH DIAGNOSTICS -All error messages are directed to the -.BR TIFFError (3TIFF) -routine. -.SH "SEE ALSO" -.BR TIFFOpen (3TIFF), -.BR TIFFReadRawTile (3TIFF), -.BR TIFFReadTile (3TIFF), -.BR libtiff (3TIFF) -.PP -Libtiff library home page: -.BR http://www.remotesensing.org/libtiff/ diff --git a/tiff/man/TIFFReadRGBAImage.3tiff b/tiff/man/TIFFReadRGBAImage.3tiff deleted file mode 100755 index 5d43ce3..0000000 --- a/tiff/man/TIFFReadRGBAImage.3tiff +++ /dev/null @@ -1,218 +0,0 @@ -.\" $Id: TIFFReadRGBAImage.3tiff,v 1.4 2006-10-13 07:22:01 dron Exp $ -.\" -.\" Copyright (c) 1991-1997 Sam Leffler -.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. -.\" -.\" Permission to use, copy, modify, distribute, and sell this software and -.\" its documentation for any purpose is hereby granted without fee, provided -.\" that (i) the above copyright notices and this permission notice appear in -.\" all copies of the software and related documentation, and (ii) the names of -.\" Sam Leffler and Silicon Graphics may not be used in any advertising or -.\" publicity relating to the software without the specific, prior written -.\" permission of Sam Leffler and Silicon Graphics. -.\" -.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -.\" -.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -.\" OF THIS SOFTWARE. -.\" -.if n .po 0 -.TH TIFFReadRGBAImage 3TIFF "October 13, 2006" "libtiff" -.SH NAME -TIFFReadRGBAImage, TIFFReadRGBAImageOriented \- read and decode an image -into a fixed-format raster -.SH SYNOPSIS -.B "#include <tiffio.h>" -.sp -.B "#define TIFFGetR(abgr) ((abgr) & 0xff)" -.br -.B "#define TIFFGetG(abgr) (((abgr) >> 8) & 0xff)" -.br -.B "#define TIFFGetB(abgr) (((abgr) >> 16) & 0xff)" -.br -.B "#define TIFFGetA(abgr) (((abgr) >> 24) & 0xff)" -.sp -.BI "int TIFFReadRGBAImage(TIFF *" tif ", uint32 " width ", uint32 " height ", uint32 *" raster ", int " stopOnError ")" -.br -.BI "int TIFFReadRGBAImageOriented(TIFF *" tif ", uint32 " width ", uint32 " height ", uint32 *" raster ", int " orientation ", int " stopOnError ")" -.br -.SH DESCRIPTION -.IR TIFFReadRGBAImage -reads a strip- or tile-based image into memory, storing the -result in the user supplied -.IR raster . -The raster is assumed to be an array of -.I width -times -.I height -32-bit entries, where -.I width -must be less than or equal to the width of the image (\c -.I height -may be any non-zero size). -If the raster dimensions are smaller than the image, the image data -is cropped to the raster bounds. -If the raster height is greater than that of the image, then the -image data are placed in the lower part of the raster. -(Note that the raster is assume to be organized such that the pixel -at location (\fIx\fP,\fIy\fP) is \fIraster\fP[\fIy\fP*\fIwidth\fP+\fIx\fP]; -with the raster origin in the lower-left hand corner.) -.PP -.IR TIFFReadRGBAImageOriented -works like -.IR TIFFReadRGBAImage -with except of that user can specify the raster origin position with the -.I orientation -parameter. Four orientations supported: -.TP -.B ORIENTATION_TOPLEFT -origin in top-left corner, -.TP -.B ORIENTATION_TOPRIGHT -origin in top-right corner, -.TP -.B ORIENTATION_BOTLEFT -origin in bottom-left corner -and -.TP -.B ORIENTATION_BOTRIGHT -origin in bottom-right corner. -.LP -If you choose -.B ORIENTATION_BOTLEFT -result will be the same as returned by the -.IR TIFFReadRGBAImage. -.PP -Raster pixels are 8-bit packed red, green, blue, alpha samples. -The macros -.IR TIFFGetR , -.IR TIFFGetG , -.IR TIFFGetB , -and -.I TIFFGetA -should be used to access individual samples. -Images without Associated Alpha matting information have a constant -Alpha of 1.0 (255). -.PP -.I TIFFReadRGBAImage -converts non-8-bit images by scaling sample values. -Palette, grayscale, bilevel, -.SM CMYK\c -, and YCbCr images are converted to -.SM RGB -transparently. -Raster pixels are returned uncorrected by any colorimetry information -present in the directory. -.PP -The paramater -.I stopOnError -specifies how to act if an error is encountered while reading -the image. -If -.I stopOnError -is non-zero, then an error will terminate the operation; otherwise -.I TIFFReadRGBAImage -will continue processing data until all the possible data in the -image have been requested. -.SH NOTES -In C++ the -.I stopOnError -parameter defaults to 0. -.PP -Samples must be either 1, 2, 4, 8, or 16 bits. -Colorimetric samples/pixel must be either 1, 3, or 4 (i.e. -.I SamplesPerPixel -minus -.IR ExtraSamples ). -.PP -Palettte image colormaps that appear to be incorrectly written -as 8-bit values are automatically scaled to 16-bits. -.PP -.I TIFFReadRGBAImage -is just a wrapper around the more general -.IR TIFFRGBAImage (3TIFF) -facilities. -.SH "RETURN VALUES" -1 is returned if the image was successfully read and converted. -Otherwise, 0 is returned if an error was encountered and -.I stopOnError -is zero. -.SH DIAGNOSTICS -All error messages are directed to the -.IR TIFFError (3TIFF) -routine. -.PP -.BR "Sorry, can not handle %d-bit pictures" . -The image had -.I BitsPerSample -other than 1, 2, 4, 8, or 16. -.PP -.BR "Sorry, can not handle %d-channel images" . -The image had -.I SamplesPerPixel -other than 1, 3, or 4. -.PP -\fBMissing needed "PhotometricInterpretation" tag\fP. -The image did not have a tag that describes how to display -the data. -.PP -\fBNo "PhotometricInterpretation" tag, assuming RGB\fP. -The image was missing a tag that describes how to display it, -but because it has 3 or 4 samples/pixel, it is assumed to be -.SM RGB. -.PP -\fBNo "PhotometricInterpretation" tag, assuming min-is-black\fP. -The image was missing a tag that describes how to display it, -but because it has 1 sample/pixel, it is assumed to be a grayscale -or bilevel image. -.PP -.BR "No space for photometric conversion table" . -There was insufficient memory for a table used to convert -image samples to 8-bit -.SM RGB. -.PP -\fBMissing required "Colormap" tag\fP. -A Palette image did not have a required -.I Colormap -tag. -.PP -.BR "No space for tile buffer" . -There was insufficient memory to allocate an i/o buffer. -.PP -.BR "No space for strip buffer" . -There was insufficient memory to allocate an i/o buffer. -.PP -.BR "Can not handle format" . -The image has a format (combination of -.IR BitsPerSample , -.IR SamplesPerPixel , -and -.IR PhotometricInterpretation ) -that -.I TIFFReadRGBAImage -can not handle. -.PP -.BR "No space for B&W mapping table" . -There was insufficient memory to allocate a table used to map -grayscale data to -.SM RGB. -.PP -.BR "No space for Palette mapping table" . -There was insufficient memory to allocate a table used to map -data to 8-bit -.SM RGB. -.SH "SEE ALSO" -.BR TIFFOpen (3TIFF), -.BR TIFFRGBAImage (3TIFF), -.BR TIFFReadRGBAStrip (3TIFF), -.BR TIFFReadRGBATile (3TIFF), -.BR libtiff (3TIFF) -.PP -Libtiff library home page: -.BR http://www.remotesensing.org/libtiff/ diff --git a/tiff/man/TIFFReadRGBAStrip.3tiff b/tiff/man/TIFFReadRGBAStrip.3tiff deleted file mode 100755 index a8bb189..0000000 --- a/tiff/man/TIFFReadRGBAStrip.3tiff +++ /dev/null @@ -1,170 +0,0 @@ -.\" $Id: TIFFReadRGBAStrip.3tiff,v 1.3 2005-11-02 11:07:18 dron Exp $ -.\" -.\" Copyright (c) 1991-1997 Sam Leffler -.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. -.\" -.\" Permission to use, copy, modify, distribute, and sell this software and -.\" its documentation for any purpose is hereby granted without fee, provided -.\" that (i) the above copyright notices and this permission notice appear in -.\" all copies of the software and related documentation, and (ii) the names of -.\" Sam Leffler and Silicon Graphics may not be used in any advertising or -.\" publicity relating to the software without the specific, prior written -.\" permission of Sam Leffler and Silicon Graphics. -.\" -.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -.\" -.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -.\" OF THIS SOFTWARE. -.\" -.if n .po 0 -.TH TIFFReadRGBAStrip 3TIFF "December 10, 1998" "libtiff" -.SH NAME -TIFFReadRGBAStrip \- read and decode an image strip into a fixed-format raster -.SH SYNOPSIS -.B "#include <tiffio.h>" -.sp -.B "#define TIFFGetR(abgr) ((abgr) & 0xff)" -.br -.B "#define TIFFGetG(abgr) (((abgr) >> 8) & 0xff)" -.br -.B "#define TIFFGetB(abgr) (((abgr) >> 16) & 0xff)" -.br -.B "#define TIFFGetA(abgr) (((abgr) >> 24) & 0xff)" -.sp -.BI "int TIFFReadRGBAStrip(TIFF *" tif ", uint32 " row ", uint32 *" raster ")" -.SH DESCRIPTION -.IR TIFFReadRGBAStrip -reads a single strip of a strip-based image into memory, storing the result in -the user supplied RGBA -.IR raster . -The raster is assumed to be an array of width times rowsperstrip 32-bit -entries, where width is the width of the image (TIFFTAG_IMAGEWIDTH) and -rowsperstrip is the maximum lines in a strip (TIFFTAG_ROWSPERSTRIP). - -.PP -The -.IR row -value should be the row of the first row in the strip (strip * rowsperstrip, -zero based). - -.PP -Note that the raster is assume to be organized such that the pixel at location -(\fIx\fP,\fIy\fP) is \fIraster\fP[\fIy\fP*\fIwidth\fP+\fIx\fP]; with the -raster origin in the -.I lower-left hand corner -of the strip. That is bottom to top organization. When reading a partial last -strip in the file the last line of the image will begin at the beginning of -the buffer. - -.PP -Raster pixels are 8-bit packed red, green, blue, alpha samples. The macros -.IR TIFFGetR , -.IR TIFFGetG , -.IR TIFFGetB , -and -.I TIFFGetA -should be used to access individual samples. Images without Associated Alpha -matting information have a constant Alpha of 1.0 (255). -.PP -See the -.IR TIFFRGBAImage (3TIFF) -page for more details on how various image types are converted to RGBA values. -.SH NOTES -Samples must be either 1, 2, 4, 8, or 16 bits. Colorimetric samples/pixel must -be either 1, 3, or 4 (i.e. -.I SamplesPerPixel -minus -.IR ExtraSamples ). -.PP -Palette image colormaps that appear to be incorrectly written as 8-bit values -are automatically scaled to 16-bits. -.PP -.I TIFFReadRGBAStrip -is just a wrapper around the more general -.IR TIFFRGBAImage (3TIFF) -facilities. It's main advantage over the similar -.IR TIFFReadRGBAImage() -function is that for large images a single buffer capable of holding the whole -image doesn't need to be allocated, only enough for one strip. The -.IR TIFFReadRGBATile() -function does a similar operation for tiled images. -.SH "RETURN VALUES" -1 is returned if the image was successfully read and converted. -Otherwise, 0 is returned if an error was encountered. -.SH DIAGNOSTICS -All error messages are directed to the -.IR TIFFError (3TIFF) -routine. -.PP -.BR "Sorry, can not handle %d-bit pictures" . -The image had -.I BitsPerSample -other than 1, 2, 4, 8, or 16. -.PP -.BR "Sorry, can not handle %d-channel images" . -The image had -.I SamplesPerPixel -other than 1, 3, or 4. -.PP -\fBMissing needed "PhotometricInterpretation" tag\fP. -The image did not have a tag that describes how to display the data. -.PP -\fBNo "PhotometricInterpretation" tag, assuming RGB\fP. -The image was missing a tag that describes how to display it, but because it -has 3 or 4 samples/pixel, it is assumed to be -.SM RGB. -.PP -\fBNo "PhotometricInterpretation" tag, assuming min-is-black\fP. The image was -missing a tag that describes how to display it, but because it has 1 -sample/pixel, it is assumed to be a grayscale or bilevel image. -.PP -.BR "No space for photometric conversion table" . -There was insufficient memory for a table used to convert image samples to -8-bit -.SM RGB. -.PP -\fBMissing required "Colormap" tag\fP. -A Palette image did not have a required -.I Colormap -tag. -.PP -.BR "No space for tile buffer" . -There was insufficient memory to allocate an i/o buffer. -.PP -.BR "No space for strip buffer" . -There was insufficient memory to allocate an i/o buffer. -.PP -.BR "Can not handle format" . -The image has a format (combination of -.IR BitsPerSample , -.IR SamplesPerPixel , -and -.IR PhotometricInterpretation ) -that -.I TIFFReadRGBAImage -can not handle. -.PP -.BR "No space for B&W mapping table" . -There was insufficient memory to allocate a table used to map grayscale data -to -.SM RGB. -.PP -.BR "No space for Palette mapping table" . -There was insufficient memory to allocate a table used to map data to 8-bit -.SM RGB. -.SH "SEE ALSO" -.BR TIFFOpen (3TIFF), -.BR TIFFRGBAImage (3TIFF), -.BR TIFFReadRGBAImage (3TIFF), -.BR TIFFReadRGBATile (3TIFF), -.BR libtiff (3TIFF) -.PP -Libtiff library home page: -.BR http://www.remotesensing.org/libtiff/ - diff --git a/tiff/man/TIFFReadRGBATile.3tiff b/tiff/man/TIFFReadRGBATile.3tiff deleted file mode 100755 index dfae1a9..0000000 --- a/tiff/man/TIFFReadRGBATile.3tiff +++ /dev/null @@ -1,171 +0,0 @@ -.\" $Id: TIFFReadRGBATile.3tiff,v 1.2 2005-11-02 11:07:18 dron Exp $ -.\" -.\" Copyright (c) 1991-1997 Sam Leffler -.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. -.\" -.\" Permission to use, copy, modify, distribute, and sell this software and -.\" its documentation for any purpose is hereby granted without fee, provided -.\" that (i) the above copyright notices and this permission notice appear in -.\" all copies of the software and related documentation, and (ii) the names of -.\" Sam Leffler and Silicon Graphics may not be used in any advertising or -.\" publicity relating to the software without the specific, prior written -.\" permission of Sam Leffler and Silicon Graphics. -.\" -.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -.\" -.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -.\" OF THIS SOFTWARE. -.\" -.if n .po 0 -.TH TIFFReadRGBATile 3TIFF "December 10, 1998" "libtiff" -.SH NAME -TIFFReadRGBATile \- read and decode an image tile into a fixed-format raster -.SH SYNOPSIS -.B "#include <tiffio.h>" -.sp -.B "#define TIFFGetR(abgr) ((abgr) & 0xff)" -.br -.B "#define TIFFGetG(abgr) (((abgr) >> 8) & 0xff)" -.br -.B "#define TIFFGetB(abgr) (((abgr) >> 16) & 0xff)" -.br -.B "#define TIFFGetA(abgr) (((abgr) >> 24) & 0xff)" -.sp -.BI "int TIFFReadRGBATile(TIFF *" tif ", uint32 " x ", uint32 " y ", uint32 *" raster ")" -.SH DESCRIPTION -.IR TIFFReadRGBATile -reads a single tile of a tile-based image into memory, storing the result in -the user supplied RGBA -.IR raster . -The raster is assumed to be an array of width times length 32-bit entries, -where width is the width of a tile (TIFFTAG_TILEWIDTH) and length is the -height of a tile (TIFFTAG_TILELENGTH). - -.PP -The -.IR x -and -.IR y -values are the offsets from the top left corner to the top left corner of the -tile to be read. They must be an exact multiple of the tile width and length. - -.PP -Note that the raster is assume to be organized such that the pixel at location -(\fIx\fP,\fIy\fP) is \fIraster\fP[\fIy\fP*\fIwidth\fP+\fIx\fP]; with the -raster origin in the -.I lower-left hand corner -of the tile. That is bottom to top organization. Edge tiles which partly fall -off the image will be filled out with appropriate zeroed areas. - -.PP -Raster pixels are 8-bit packed red, green, blue, alpha samples. The macros -.IR TIFFGetR , -.IR TIFFGetG , -.IR TIFFGetB , -and -.I TIFFGetA -should be used to access individual samples. Images without Associated Alpha -matting information have a constant Alpha of 1.0 (255). -.PP -See the -.IR TIFFRGBAImage (3TIFF) -page for more details on how various image types are converted to RGBA values. -.SH NOTES -Samples must be either 1, 2, 4, 8, or 16 bits. Colorimetric samples/pixel must -be either 1, 3, or 4 (i.e. -.I SamplesPerPixel -minus -.IR ExtraSamples ). -.PP -Palette image colormaps that appear to be incorrectly written as 8-bit values -are automatically scaled to 16-bits. -.PP -.I TIFFReadRGBATile -is just a wrapper around the more general -.IR TIFFRGBAImage (3TIFF) -facilities. It's main advantage over the similar -.IR TIFFReadRGBAImage() -function is that for large images a single buffer capable of holding the whole -image doesn't need to be allocated, only enough for one tile. The -.IR TIFFReadRGBAStrip() -function does a similar operation for stripped images. -.SH "RETURN VALUES" -1 is returned if the image was successfully read and converted. -Otherwise, 0 is returned if an error was encountered. -.SH DIAGNOSTICS -All error messages are directed to the -.IR TIFFError (3TIFF) -routine. -.PP -.BR "Sorry, can not handle %d-bit pictures" . -The image had -.I BitsPerSample -other than 1, 2, 4, 8, or 16. -.PP -.BR "Sorry, can not handle %d-channel images" . -The image had -.I SamplesPerPixel -other than 1, 3, or 4. -.PP -\fBMissing needed "PhotometricInterpretation" tag\fP. -The image did not have a tag that describes how to display the data. -.PP -\fBNo "PhotometricInterpretation" tag, assuming RGB\fP. -The image was missing a tag that describes how to display it, but because it -has 3 or 4 samples/pixel, it is assumed to be -.SM RGB. -.PP -\fBNo "PhotometricInterpretation" tag, assuming min-is-black\fP. -The image was missing a tag that describes how to display it, -but because it has 1 sample/pixel, it is assumed to be a grayscale -or bilevel image. -.PP -.BR "No space for photometric conversion table" . -There was insufficient memory for a table used to convert -image samples to 8-bit -.SM RGB. -.PP -\fBMissing required "Colormap" tag\fP. -A Palette image did not have a required -.I Colormap -tag. -.PP -.BR "No space for tile buffer" . -There was insufficient memory to allocate an i/o buffer. -.PP -.BR "No space for strip buffer" . -There was insufficient memory to allocate an i/o buffer. -.PP -.BR "Can not handle format" . -The image has a format (combination of -.IR BitsPerSample , -.IR SamplesPerPixel , -and -.IR PhotometricInterpretation ) -that -.I TIFFReadRGBAImage -can not handle. -.PP -.BR "No space for B&W mapping table" . -There was insufficient memory to allocate a table used to map -grayscale data to -.SM RGB. -.PP -.BR "No space for Palette mapping table" . -There was insufficient memory to allocate a table used to map data to 8-bit -.SM RGB. -.SH "SEE ALSO" -.BR TIFFOpen (3TIFF), -.BR TIFFRGBAImage (3TIFF), -.BR TIFFReadRGBAImage (3TIFF), -.BR TIFFReadRGBAStrip (3TIFF), -.BR libtiff (3TIFF) -.PP -Libtiff library home page: -.BR http://www.remotesensing.org/libtiff/ diff --git a/tiff/man/TIFFReadRawStrip.3tiff b/tiff/man/TIFFReadRawStrip.3tiff deleted file mode 100755 index 1f2d1d1..0000000 --- a/tiff/man/TIFFReadRawStrip.3tiff +++ /dev/null @@ -1,64 +0,0 @@ -.\" $Id: TIFFReadRawStrip.3tiff,v 1.2 2005-11-02 11:07:18 dron Exp $ -.\" -.\" Copyright (c) 1988-1997 Sam Leffler -.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. -.\" -.\" Permission to use, copy, modify, distribute, and sell this software and -.\" its documentation for any purpose is hereby granted without fee, provided -.\" that (i) the above copyright notices and this permission notice appear in -.\" all copies of the software and related documentation, and (ii) the names of -.\" Sam Leffler and Silicon Graphics may not be used in any advertising or -.\" publicity relating to the software without the specific, prior written -.\" permission of Sam Leffler and Silicon Graphics. -.\" -.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -.\" -.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -.\" OF THIS SOFTWARE. -.\" -.if n .po 0 -.TH TIFFReadRawStrip 3TIFF "October 15, 1995" "libtiff" -.SH NAME -TIFFReadRawStrip \- return the undecoded contents of a strip of data from an -open -.SM TIFF -file -.SH SYNOPSIS -.B "#include <tiffio.h>" -.sp -.BI "tsize_t TIFFReadRawStrip(TIFF *" tif ", tstrip_t " strip ", tdata_t " buf ", tsize_t " size ")" -.SH DESCRIPTION -Read the contents of the specified strip into the (user supplied) data buffer. -Note that the value of -.I strip -is a ``raw strip number.'' That is, the caller must take into account whether -or not the data is organized in separate planes (\c -.IR PlanarConfiguration =2). -To read a full strip of data the data buffer should typically be at least as -large as the number returned by -.IR TIFFStripSize . -.SH "RETURN VALUES" -The actual number of bytes of data that were placed in -.I buf -is returned; -.IR TIFFReadEncodedStrip -returns \-1 if an error was encountered. -.SH DIAGNOSTICS -All error messages are directed to the -.BR TIFFError (3TIFF) -routine. -.SH "SEE ALSO" -.BR TIFFOpen (3TIFF), -.BR TIFFReadEncodedStrip (3TIFF), -.BR TIFFReadScanline (3TIFF), -.BR TIFFStripSize (3TIFF), -.BR libtiff (3TIFF) -.PP -Libtiff library home page: -.BR http://www.remotesensing.org/libtiff/ diff --git a/tiff/man/TIFFReadRawTile.3tiff b/tiff/man/TIFFReadRawTile.3tiff deleted file mode 100755 index 3945dd9..0000000 --- a/tiff/man/TIFFReadRawTile.3tiff +++ /dev/null @@ -1,65 +0,0 @@ -.\" $Id: TIFFReadRawTile.3tiff,v 1.2 2005-11-02 11:07:18 dron Exp $ -.\" -.\" Copyright (c) 1988-1997 Sam Leffler -.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. -.\" -.\" Permission to use, copy, modify, distribute, and sell this software and -.\" its documentation for any purpose is hereby granted without fee, provided -.\" that (i) the above copyright notices and this permission notice appear in -.\" all copies of the software and related documentation, and (ii) the names of -.\" Sam Leffler and Silicon Graphics may not be used in any advertising or -.\" publicity relating to the software without the specific, prior written -.\" permission of Sam Leffler and Silicon Graphics. -.\" -.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -.\" -.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -.\" OF THIS SOFTWARE. -.\" -.if n .po 0 -.TH TIFFReadRawTile 3TIFF "October 15, 1995" "libtiff" -.SH NAME -TIFFReadRawTile \- return an undecoded tile of data from an open -.SM TIFF -file -.SH SYNOPSIS -.B "#include <tiffio.h>" -.sp -.BI "tsize_t TIFFReadRawTile(TIFF *" tif ", ttile_t " tile ", tdata_t " buf ", tsize_t " size ")" -.SH DESCRIPTION -Read the contents of the specified tile into the (user supplied) data buffer. -Note that the value of -.I tile -is a ``raw tile number.'' That is, the caller must take into account whether -or not the data is organized in separate planes (\c -.IR PlanarConfiguration =2). -.I TIFFComputeTile -automatically does this when converting an (x,y,z,sample) coordinate quadruple -to a tile number. To read a full tile of data the data buffer should typically -be at least as large as the value returned by -.IR TIFFTileSize . -.SH "RETURN VALUES" -The actual number of bytes of data that were placed in -.I buf -is returned; -.IR TIFFReadEncodedTile -returns \-1 if an error was encountered. -.SH DIAGNOSTICS -All error messages are directed to the -.BR TIFFError (3TIFF) -routine. -.SH "SEE ALSO" -.BR TIFFOpen (3TIFF), -.BR TIFFReadEncodedTile (3TIFF), -.BR TIFFReadTile (3TIFF), -.BR TIFFTileSize (3TIFF), -.BR libtiff (3TIFF) -.PP -Libtiff library home page: -.BR http://www.remotesensing.org/libtiff/ diff --git a/tiff/man/TIFFReadScanline.3tiff b/tiff/man/TIFFReadScanline.3tiff deleted file mode 100755 index 7baf651..0000000 --- a/tiff/man/TIFFReadScanline.3tiff +++ /dev/null @@ -1,94 +0,0 @@ -.\" $Id: TIFFReadScanline.3tiff,v 1.2 2005-11-02 11:07:18 dron Exp $ -.\" -.\" Copyright (c) 1988-1997 Sam Leffler -.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. -.\" -.\" Permission to use, copy, modify, distribute, and sell this software and -.\" its documentation for any purpose is hereby granted without fee, provided -.\" that (i) the above copyright notices and this permission notice appear in -.\" all copies of the software and related documentation, and (ii) the names of -.\" Sam Leffler and Silicon Graphics may not be used in any advertising or -.\" publicity relating to the software without the specific, prior written -.\" permission of Sam Leffler and Silicon Graphics. -.\" -.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -.\" -.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -.\" OF THIS SOFTWARE. -.\" -.if n .po 0 -.TH TIFFReadScanline 3TIFF "October 15, 1995" "libtiff" -.SH NAME -TIFFReadScanline \- read and decode a scanline of data from an open -.SM TIFF -file -.SH SYNOPSIS -.B "#include <tiffio.h>" -.sp -.BI "int TIFFReadScanline(TIFF *" tif ", tdata_t " buf ", uint32 " row ", tsample_t " sample ")" -.SH DESCRIPTION -Read the data for the specified row into the (user supplied) data buffer -.IR buf . -The data are returned decompressed and, in the native byte- and bit-ordering, -but are otherwise packed (see further below). The buffer must be large enough -to hold an entire scanline of data. Applications should call the routine -.IR TIFFScanlineSize -to find out the size (in bytes) of a scanline buffer. -The -.I row -parameter is always used by -.IR TIFFReadScanline ; -the -.I sample -parameter is used only if data are organized in separate planes (\c -.IR PlanarConfiguration =2). -.SH NOTES -The library attempts to hide bit- and byte-ordering differences between the -image and the native machine by converting data to the native machine order. -Bit reversal is done if the -.I FillOrder -tag is opposite to the native machine bit order. 16- and 32-bit samples are -automatically byte-swapped if the file was written with a byte order opposite -to the native machine byte order, -.PP -In C++ the -.I sample -parameter defaults to 0. -.SH "RETURN VALUES" -.IR TIFFReadScanline -returns \-1 if it detects an error; otherwise 1 is returned. -.SH DIAGNOSTICS -All error messages are directed to the -.IR TIFFError (3TIFF) -routine. -.PP -.BR "Compression algorithm does not support random access" . -Data was requested in a non-sequential order from a file that uses a -compression algorithm and that has -.I RowsPerStrip -greater than one. -That is, data in the image is stored in a compressed form, and with multiple -rows packed into a strip. In this case, the library does not support random -access to the data. The data should either be accessed sequentially, or the -file should be converted so that each strip is made up of one row of data. -.SH BUGS -Reading subsampled YCbCR data does not work correctly because, for -.IR PlanarConfiguration =2 -the size of a scanline is not calculated on a per-sample basis, and for -.IR PlanarConfiguration =1 -the library does not unpack the block-interleaved samples; use the strip- and -tile-based interfaces to read these formats. -.SH "SEE ALSO" -.BR TIFFOpen (3TIFF), -.BR TIFFReadEncodedStrip (3TIFF), -.BR TIFFReadRawStrip (3TIFF), -.BR libtiff (3TIFF) -.PP -Libtiff library home page: -.BR http://www.remotesensing.org/libtiff/ diff --git a/tiff/man/TIFFReadTile.3tiff b/tiff/man/TIFFReadTile.3tiff deleted file mode 100755 index 4a9b20d..0000000 --- a/tiff/man/TIFFReadTile.3tiff +++ /dev/null @@ -1,84 +0,0 @@ -.\" $Id: TIFFReadTile.3tiff,v 1.2 2005-11-02 11:07:18 dron Exp $ -.\" -.\" Copyright (c) 1988-1997 Sam Leffler -.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. -.\" -.\" Permission to use, copy, modify, distribute, and sell this software and -.\" its documentation for any purpose is hereby granted without fee, provided -.\" that (i) the above copyright notices and this permission notice appear in -.\" all copies of the software and related documentation, and (ii) the names of -.\" Sam Leffler and Silicon Graphics may not be used in any advertising or -.\" publicity relating to the software without the specific, prior written -.\" permission of Sam Leffler and Silicon Graphics. -.\" -.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -.\" -.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -.\" OF THIS SOFTWARE. -.\" -.if n .po 0 -.TH TIFFReadTile 3TIFF "December 16, 1991" "libtiff" -.SH NAME -TIFFReadTile \- read and decode a tile of data from an open -.SM TIFF -file -.SH SYNOPSIS -.B "#include <tiffio.h>" -.sp -.BI "tsize_t TIFFReadTile(TIFF *" tif ", tdata_t " buf ", uint32 " x ", uint32 " y ", uint32 " z ", tsample_t " sample ")" -.SH DESCRIPTION -Return the data for the tile -.I containing -the specified coordinates. The data placed in -.I buf -are returned decompressed and, typically, in the native byte- and -bit-ordering, but are otherwise packed (see further below). The buffer must be -large enough to hold an entire tile of data. Applications should call the -routine -.IR TIFFTileSize -to find out the size (in bytes) of a tile buffer. The -.I x -and -.I y -parameters are always used by -.IR TIFFReadTile . -The -.I z -parameter is used if the image is deeper than 1 slice (\c -.IR ImageDepth >1). -The -.I sample -parameter is used only if data are organized in separate planes (\c -.IR PlanarConfiguration =2). -.SH NOTES -The library attempts to hide bit- and byte-ordering differences between the -image and the native machine by converting data to the native machine order. -Bit reversal is done if the -.I FillOrder -tag is opposite to the native machine bit order. 16- and 32-bit samples are -automatically byte-swapped if the file was written with a byte order opposite -to the native machine byte order, -.SH "RETURN VALUES" -.IR TIFFReadTile -returns \-1 if it detects an error; otherwise the number of bytes in the -decoded tile is returned. -.SH DIAGNOSTICS -All error messages are directed to the -.BR TIFFError (3TIFF) -routine. -.SH "SEE ALSO" -.BR TIFFCheckTile (3TIFF), -.BR TIFFComputeTile (3TIFF), -.BR TIFFOpen (3TIFF), -.BR TIFFReadEncodedTile (3TIFF), -.BR TIFFReadRawTile (3TIFF), -.BR libtiff (3TIFF) -.PP -Libtiff library home page: -.BR http://www.remotesensing.org/libtiff/ diff --git a/tiff/man/TIFFSetDirectory.3tiff b/tiff/man/TIFFSetDirectory.3tiff deleted file mode 100755 index 162d310..0000000 --- a/tiff/man/TIFFSetDirectory.3tiff +++ /dev/null @@ -1,79 +0,0 @@ -.\" $Id: TIFFSetDirectory.3tiff,v 1.2 2005-11-02 11:07:18 dron Exp $ -.\" -.\" Copyright (c) 1988-1997 Sam Leffler -.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. -.\" -.\" Permission to use, copy, modify, distribute, and sell this software and -.\" its documentation for any purpose is hereby granted without fee, provided -.\" that (i) the above copyright notices and this permission notice appear in -.\" all copies of the software and related documentation, and (ii) the names of -.\" Sam Leffler and Silicon Graphics may not be used in any advertising or -.\" publicity relating to the software without the specific, prior written -.\" permission of Sam Leffler and Silicon Graphics. -.\" -.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -.\" -.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -.\" OF THIS SOFTWARE. -.\" -.if n .po 0 -.TH TIFFSetDirectory 3TIFF "October 15, 1995" "libtiff" -.SH NAME -TIFFSetDirectory, TIFFSetSubDirectory \- set the current directory for an open -.SM TIFF -file -.SH SYNOPSIS -.B "#include <tiffio.h>" -.sp -.BI "int TIFFSetDirectory(TIFF *" tif ", tdir_t " dirnum ")" -.br -.BI "int TIFFSetSubDirectory(TIFF *" tif ", uint32 " diroff ")" -.SH DESCRIPTION -.I TIFFSetDirectory -changes the current directory and reads its contents with -.IR TIFFReadDirectory . -The parameter -.I dirnum -specifies the subfile/directory as an integer number, with the first directory -numbered zero. -.PP -.I TIFFSetSubDirectory -acts like -.IR TIFFSetDirectory , -except the directory is specified as a file offset instead of an index; this -is required for accessing subdirectories linked through a -.I SubIFD -tag. -.SH "RETURN VALUES" -On successful return 1 is returned. Otherwise, 0 is returned if -.I dirnum -or -.I diroff -specifies a non-existent directory, or if an error was encountered while -reading the directory's contents. -.SH DIAGNOSTICS -All error messages are directed to the -.IR TIFFError (3TIFF) -routine. -.PP -.BR "%s: Error fetching directory count" . -An error was encountered while reading the ``directory count'' field. -.PP -.BR "%s: Error fetching directory link" . -An error was encountered while reading the ``link value'' that points to the -next directory in a file. -.SH "SEE ALSO" -.IR TIFFCurrentDirectory (3TIFF), -.IR TIFFOpen (3TIFF), -.IR TIFFReadDirectory (3TIFF), -.IR TIFFWriteDirectory (3TIFF), -.IR libtiff (3TIFF) -.PP -Libtiff library home page: -.BR http://www.remotesensing.org/libtiff/ diff --git a/tiff/man/TIFFSetField.3tiff b/tiff/man/TIFFSetField.3tiff deleted file mode 100755 index 33e9471..0000000 --- a/tiff/man/TIFFSetField.3tiff +++ /dev/null @@ -1,217 +0,0 @@ -.\" $Id: TIFFSetField.3tiff,v 1.5 2010-05-06 02:54:46 olivier Exp $ -.\" -.\" Copyright (c) 1988-1997 Sam Leffler -.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. -.\" -.\" Permission to use, copy, modify, distribute, and sell this software and -.\" its documentation for any purpose is hereby granted without fee, provided -.\" that (i) the above copyright notices and this permission notice appear in -.\" all copies of the software and related documentation, and (ii) the names of -.\" Sam Leffler and Silicon Graphics may not be used in any advertising or -.\" publicity relating to the software without the specific, prior written -.\" permission of Sam Leffler and Silicon Graphics. -.\" -.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -.\" -.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -.\" OF THIS SOFTWARE. -.\" -.if n .po 0 -.TH TIFFSetField 3TIFF "October 29, 2004" "libtiff" -.SH NAME -TIFFSetField, TIFFVSetField \- set the value(s) of a tag in a -.SM TIFF -file open for writing -.SH SYNOPSIS -.B "#include <tiffio.h>" -.sp -.BI "int TIFFSetField(TIFF *" tif ", ttag_t " tag ", " ... ")" -.sp -.B "#include <stdarg.h>" -.sp -.BI "int TIFFVSetField(TIFF *" tif ", ttag_t " tag ", va_list " ap ")" -.SH DESCRIPTION -.IR TIFFSetField -sets the value of a field -or pseudo-tag in the current directory associated with -the open -.SM TIFF -file -.IR tif . -(A -.I pseudo-tag -is a parameter that is used to control the operation of the -.SM TIFF -library but whose value is not read or written to the underlying file.) -To set the value of a field -the file must have been previously opened for writing with -.IR TIFFOpen (3TIFF); -pseudo-tags can be set whether the file was opened for reading -or writing. -The field is identified by -.IR tag , -one of the values defined in the include file -.B tiff.h -(see also the table below). -The actual value is specified using a variable argument list, -as prescribed by the -.IR stdarg (3) -interface (\c -or, on some machines, the -.IR varargs (3) -interface.) -.PP -.IR TIFFVSetField -is functionally equivalent to -.IR TIFFSetField -except that it takes a pointer to a variable -argument list. -.I TIFFVSetField -is useful for writing routines that are layered -on top of the functionality provided by -.IR TIFFSetField . -.PP -The tags understood by -.IR libtiff , -the number of parameter values, and the -expected types for the parameter values are shown below. -The data types are: -.I char* -is null-terminated string and corresponds to the -.SM ASCII -data type; -.I uint16 -is an unsigned 16-bit value; -.I uint32 -is an unsigned 32-bit value; -.I uint16* -is an array of unsigned 16-bit values. -.I void* -is an array of data values of unspecified type. - -Consult the -.SM TIFF -specification for information on the meaning of each tag. -.PP -.nf -.ta \w'TIFFTAG_CONSECUTIVEBADFAXLINES'u+2n +\w'Count'u+2n +\w'TIFFFaxFillFunc \(dg'u+2n -\fITag Name\fP \fICount\fP \fITypes\fP \fINotes\fP -.sp 5p -TIFFTAG_ARTIST 1 char* -TIFFTAG_BADFAXLINES 1 uint32 -TIFFTAG_BITSPERSAMPLE 1 uint16 \(dg -TIFFTAG_CLEANFAXDATA 1 uint16 -TIFFTAG_COLORMAP 3 uint16* 1<<BitsPerSample arrays -TIFFTAG_COMPRESSION 1 uint16 \(dg -TIFFTAG_CONSECUTIVEBADFAXLINES 1 uint32 -TIFFTAG_COPYRIGHT 1 char* -TIFFTAG_DATETIME 1 char* -TIFFTAG_DOCUMENTNAME 1 char* -TIFFTAG_DOTRANGE 2 uint16 -TIFFTAG_EXTRASAMPLES 2 uint16,uint16* \(dg count & types array -TIFFTAG_FAXFILLFUNC 1 TIFFFaxFillFunc G3/G4 compression pseudo-tag -TIFFTAG_FAXMODE 1 int \(dg G3/G4 compression pseudo-tag -TIFFTAG_FILLORDER 1 uint16 \(dg -TIFFTAG_GROUP3OPTIONS 1 uint32 \(dg -TIFFTAG_GROUP4OPTIONS 1 uint32 \(dg -TIFFTAG_HALFTONEHINTS 2 uint16 -TIFFTAG_HOSTCOMPUTER 1 char* -TIFFTAG_ICCPROFILE 2 uint32,void* count, profile data -TIFFTAG_IMAGEDEPTH 1 uint32 \(dg -TIFFTAG_IMAGEDESCRIPTION 1 char* -TIFFTAG_IMAGELENGTH 1 uint32 -TIFFTAG_IMAGEWIDTH 1 uint32 \(dg -TIFFTAG_INKNAMES 2 uint16, char* -TIFFTAG_INKSET 1 uint16 \(dg -TIFFTAG_JPEGCOLORMODE 1 int \(dg JPEG pseudo-tag -TIFFTAG_JPEGQUALITY 1 int JPEG pseudo-tag -TIFFTAG_JPEGTABLES 2 uint32*,void* \(dg count & tables -TIFFTAG_JPEGTABLESMODE 1 int \(dg JPEG pseudo-tag -TIFFTAG_MAKE 1 char* -TIFFTAG_MATTEING 1 uint16 \(dg -TIFFTAG_MAXSAMPLEVALUE 1 uint16 -TIFFTAG_MINSAMPLEVALUE 1 uint16 -TIFFTAG_MODEL 1 char* -TIFFTAG_ORIENTATION 1 uint16 -TIFFTAG_PAGENAME 1 char* -TIFFTAG_PAGENUMBER 2 uint16 -TIFFTAG_PHOTOMETRIC 1 uint16 -TIFFTAG_PHOTOSHOP ? uint32,void* count, data -TIFFTAG_PLANARCONFIG 1 uint16 \(dg -TIFFTAG_PREDICTOR 1 uint16 \(dg -TIFFTAG_PRIMARYCHROMATICITIES 1 float* 6-entry array -TIFFTAG_REFERENCEBLACKWHITE 1 float* \(dg 6-entry array -TIFFTAG_RESOLUTIONUNIT 1 uint16 -TIFFTAG_RICHTIFFIPTC 2 uint32,void* count, data -TIFFTAG_ROWSPERSTRIP 1 uint32 \(dg must be > 0 -TIFFTAG_SAMPLEFORMAT 1 uint16 \(dg -TIFFTAG_SAMPLESPERPIXEL 1 uint16 \(dg value must be <= 4 -TIFFTAG_SMAXSAMPLEVALUE 1 double -TIFFTAG_SMINSAMPLEVALUE 1 double -TIFFTAG_SOFTWARE 1 char* -TIFFTAG_STONITS 1 double \(dg -TIFFTAG_SUBFILETYPE 1 uint32 -TIFFTAG_SUBIFD 2 uint16,uint32* count & offsets array -TIFFTAG_TARGETPRINTER 1 char* -TIFFTAG_THRESHHOLDING 1 uint16 -TIFFTAG_TILEDEPTH 1 uint32 \(dg -TIFFTAG_TILELENGTH 1 uint32 \(dg must be a multiple of 8 -TIFFTAG_TILEWIDTH 1 uint32 \(dg must be a multiple of 8 -TIFFTAG_TRANSFERFUNCTION 1 or 3\(dd uint16* 1<<BitsPerSample entry arrays -TIFFTAG_WHITEPOINT 1 float* 2-entry array -TIFFTAG_XMLPACKET 2 uint32,void* count, data -TIFFTAG_XPOSITION 1 float -TIFFTAG_XRESOLUTION 1 float -TIFFTAG_YCBCRCOEFFICIENTS 1 float* \(dg 3-entry array -TIFFTAG_YCBCRPOSITIONING 1 uint16 \(dg -TIFFTAG_YCBCRSAMPLING 2 uint16 \(dg -TIFFTAG_YPOSITION 1 float -TIFFTAG_YRESOLUTION 1 float -.fi -.sp 5p -\(dg Tag may not have its values changed once data is written. -.br -.fi -\(dd -If -.I SamplesPerPixel -is one, then a single array is passed; otherwise three arrays should be -passed. -.fi -* The contents of this field are quite complex. See -.BR "The ICC Profile Format Specification" , -Annex B.3 "Embedding ICC Profiles in TIFF Files" -(available at http://www.color.org) for an explanation. -.br -.SH "RETURN VALUES" -1 is returned if the operation was successful. -Otherwise, 0 is returned if an error was detected. -.SH DIAGNOSTICS -All error messages are directed to the -.BR TIFFError (3TIFF) -routine. -.PP -\fB%s: Cannot modify tag "%s" while writing\fP. -Data has already been written to the file, so the -specified tag's value can not be changed. -This restriction is applied to all tags that affect -the format of written data. -.PP -\fB%d: Bad value for "%s"\fP. -An invalid value was supplied for the named tag. -.SH "SEE ALSO" -.BR TIFFOpen (3TIFF), -.BR TIFFGetField (3TIFF), -.BR TIFFSetDirectory (3TIFF), -.BR TIFFWriteDirectory (3TIFF), -.BR TIFFReadDirectory (3TIFF), -.BR libtiff (3TIFF) -.PP -Libtiff library home page: -.BR http://www.remotesensing.org/libtiff/ diff --git a/tiff/man/TIFFWarning.3tiff b/tiff/man/TIFFWarning.3tiff deleted file mode 100755 index 32339aa..0000000 --- a/tiff/man/TIFFWarning.3tiff +++ /dev/null @@ -1,70 +0,0 @@ -.\" $Id: TIFFWarning.3tiff,v 1.3 2012-06-01 22:02:44 fwarmerdam Exp $ -.\" -.\" Copyright (c) 1988-1997 Sam Leffler -.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. -.\" -.\" Permission to use, copy, modify, distribute, and sell this software and -.\" its documentation for any purpose is hereby granted without fee, provided -.\" that (i) the above copyright notices and this permission notice appear in -.\" all copies of the software and related documentation, and (ii) the names of -.\" Sam Leffler and Silicon Graphics may not be used in any advertising or -.\" publicity relating to the software without the specific, prior written -.\" permission of Sam Leffler and Silicon Graphics. -.\" -.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -.\" -.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -.\" OF THIS SOFTWARE. -.\" -.if n .po 0 -.TH TIFFWarning 3TIFF "October 15, 1995" "libtiff" -.SH NAME -TIFFWarning, TIFFSetWarningHandler \- library warning interface -.SH SYNOPSIS -.B "#include <tiffio.h>" -.sp -.BI "void TIFFWarning(const char *" module ", const char *" fmt ", " ... ")" -.sp -.B "#include <stdarg.h>" -.sp -.BI "typedef void (*TIFFWarningHandler)(const char *" module ", const char *" fmt ", va_list " ap ");" -.sp -.BI "TIFFWarningHandler TIFFSetWarningHandler(TIFFWarningHandler " handler ");" -.SH DESCRIPTION -.I TIFFWarning -invokes the library-wide warning handler function to (normally) write a -warning message to the -.BR stderr . -The -.I fmt -parameter is a -.IR printf (3S) -format string, and any number arguments can be supplied. The -.I module -parameter is interpreted as a string that, if non-zero, should be printed -before the message; it typically is used to identify the software module in -which a warning is detected. -.PP -Applications that desire to capture control in the event of a warning should -use -.IR TIFFSetWarningHandler -to override the default warning handler. -A -.SM NULL -(0) warning handler function may be installed to suppress error messages. -.SH "RETURN VALUES" -.IR TIFFSetWarningHandler -returns a reference to the previous error handling function. -.SH "SEE ALSO" -.BR TIFFError (3TIFF), -.BR libtiff (3TIFF), -.BR printf (3) -.PP -Libtiff library home page: -.BR http://www.remotesensing.org/libtiff/ diff --git a/tiff/man/TIFFWriteDirectory.3tiff b/tiff/man/TIFFWriteDirectory.3tiff deleted file mode 100755 index b8de6bf..0000000 --- a/tiff/man/TIFFWriteDirectory.3tiff +++ /dev/null @@ -1,138 +0,0 @@ -.\" $Id: TIFFWriteDirectory.3tiff,v 1.3 2010-12-12 01:45:35 faxguy Exp $ -.\" -.\" Copyright (c) 1988-1997 Sam Leffler -.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. -.\" -.\" Permission to use, copy, modify, distribute, and sell this software and -.\" its documentation for any purpose is hereby granted without fee, provided -.\" that (i) the above copyright notices and this permission notice appear in -.\" all copies of the software and related documentation, and (ii) the names of -.\" Sam Leffler and Silicon Graphics may not be used in any advertising or -.\" publicity relating to the software without the specific, prior written -.\" permission of Sam Leffler and Silicon Graphics. -.\" -.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -.\" -.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -.\" OF THIS SOFTWARE. -.\" -.if n .po 0 -.TH TIFFWriteDirectory 3TIFF "September 26, 2001" "libtiff" -.SH NAME -TIFFWriteDirectory, TIFFRewriteDirectory, TIFFCheckpointDirectory \- write the -current directory in an open -.SM TIFF -file -.SH SYNOPSIS -.B "#include <tiffio.h>" -.sp -.BI "int TIFFWriteDirectory(TIFF *" tif ")" -.br -.BI "int TIFFRewriteDirectory(TIFF *" tif ")" -.br -.BI "int TIFFCheckpointDirectory(TIFF *" tif ")" -.SH DESCRIPTION -.IR TIFFWriteDirectory -will write the contents of the current directory to the file and setup to -create a new subfile in the same file. Applications only need to call -.IR TIFFWriteDirectory -when writing multiple subfiles to a single -.SM TIFF -file. -.IR TIFFWriteDirectory -is automatically called by -.IR TIFFClose -and -.IR TIFFFlush -to write a modified directory if the file is open for writing. -.PP -The -.IR TIFFRewriteDirectory -function operates similarly to -.IR TIFFWriteDirectory, -but can be called with directories previously read or written that already -have an established location in the file. It will rewrite the directory, -but instead of place it at it's old location (as -.IR TIFFWriteDirectory -would) it will place them at the end of the file, correcting the pointer from -the preceding directory or file header to point to it's new location. This -is particularly important in cases where the size of the directory and -pointed to data has grown, so it won't fit in the space available at the -old location. -.PP -The -.IR TIFFCheckpointDirectory -writes the current state of the tiff directory into the file to make what -is currently in the file readable. Unlike -.IR TIFFWriteDirectory, -.IR TIFFCheckpointDirectory -does not free up the directory data structures in memory, so they can be -updated (as strips/tiles are written) and written again. Reading such -a partial file you will at worst get a tiff read error for the first -strip/tile encountered that is incomplete, but you will at least get -all the valid data in the file before that. When the file is complete, -just use -.IR TIFFWriteDirectory -as usual to finish it off cleanly. -.SH "RETURN VALUES" -1 is returned when the contents are successfully written to the file. -Otherwise, 0 is returned if an error was encountered when writing -the directory contents. -.SH DIAGNOSTICS -All error messages are directed to the -.IR TIFFError (3TIFF) -routine. -.PP -.BR "Error post-encoding before directory write" . -Before writing the contents of the current directory, any pending data are -flushed. This message indicates that an error occurred while doing this. -.PP -.BR "Error flushing data before directory write" . -Before writing the contents of the current directory, any pending data are -flushed. This message indicates that an error occurred while doing this. -.PP -.BR "Cannot write directory, out of space" . -There was not enough space to allocate a temporary area for the directory that -was to be written. -.PP -.BR "Error writing directory count" . -A write error occurred when writing the count of fields in the directory. -.PP -.BR "Error writing directory contents" . -A write error occurred when writing the directory fields. -.PP -.BR "Error writing directory link" . -A write error occurred when writing the link to the next directory. -.PP -\fBError writing data for field "%s"\fP. -A write error occurred when writing indirect data for the specified field. -.PP -.BR "Error writing TIFF header" . -A write error occurred when re-writing header at the front of the file. -.PP -.BR "Error fetching directory count" . -A read error occurred when fetching the directory count field for -a previous directory. -This can occur when setting up a link to the directory that is being -written. -.PP -.BR "Error fetching directory link" . -A read error occurred when fetching the directory link field for -a previous directory. -This can occur when setting up a link to the directory that is being -written. -.SH "SEE ALSO" -.BR TIFFOpen (3TIFF), -.BR TIFFError (3TIFF), -.BR TIFFReadDirectory (3TIFF), -.BR TIFFSetDirectory (3TIFF), -.BR libtiff (3TIFF) -.PP -Libtiff library home page: -.BR http://www.remotesensing.org/libtiff/ diff --git a/tiff/man/TIFFWriteEncodedStrip.3tiff b/tiff/man/TIFFWriteEncodedStrip.3tiff deleted file mode 100755 index 4130634..0000000 --- a/tiff/man/TIFFWriteEncodedStrip.3tiff +++ /dev/null @@ -1,102 +0,0 @@ -.\" $Id: TIFFWriteEncodedStrip.3tiff,v 1.2 2005-11-02 11:07:18 dron Exp $ -.\" -.\" Copyright (c) 1988-1997 Sam Leffler -.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. -.\" -.\" Permission to use, copy, modify, distribute, and sell this software and -.\" its documentation for any purpose is hereby granted without fee, provided -.\" that (i) the above copyright notices and this permission notice appear in -.\" all copies of the software and related documentation, and (ii) the names of -.\" Sam Leffler and Silicon Graphics may not be used in any advertising or -.\" publicity relating to the software without the specific, prior written -.\" permission of Sam Leffler and Silicon Graphics. -.\" -.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -.\" -.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -.\" OF THIS SOFTWARE. -.\" -.if n .po 0 -.TH TIFFWriteEncodedStrip 3TIFF "October 15, 1995" "libtiff" -.SH NAME -TIFFWritedEncodedStrip \- compress and write a strip of data to an open -.SM TIFF -file -.SH SYNOPSIS -.B "#include <tiffio.h>" -.sp -.BI "tsize_t TIFFWriteEncodedStrip(TIFF *" tif ", tstrip_t " strip ", tdata_t " buf ", tsize_t " size ")" -.SH DESCRIPTION -Compress -.I size -bytes of raw data from -.I buf -and write the result to the specified strip; replacing any previously written -data. Note that the value of -.I strip -is a ``raw strip number.'' That is, the caller must take into account whether -or not the data are organized in separate planes (\c -.IR PlanarConfiguration =2). -.SH NOTES -The library writes encoded data using the native machine byte order. Correctly -implemented -.SM TIFF -readers are expected to do any necessary byte-swapping to correctly process -image data with BitsPerSample greater than 8. -.PP -The strip number must be valid according to the current settings of the -.I ImageLength -and -.I RowsPerStrip -tags. -An image may be dynamically grown by increasing the value of -.I ImageLength -prior to each call to -.IR TIFFWriteEncodedStrip . -.SH "RETURN VALUES" -\-1 is returned if an error was encountered. Otherwise, the value of -.IR size -is returned. -.SH DIAGNOSTICS -All error messages are directed to the -.IR TIFFError (3TIFF) -routine. -.PP -\fB%s: File not open for writing\fP. The file was opened for reading, not -writing. -.PP -\fBCan not write scanlines to a tiled image\fP. The image is assumed to be -organized in tiles because the -.I TileWidth -and -.I TileLength -tags have been set with -.IR TIFFSetField (3TIFF). -.PP -\fB%s: Must set "ImageWidth" before writing data\fP. -The image's width has not be set before the first write. See -.IR TIFFSetField (3TIFF) -for information on how to do this. -.PP -\fB%s: Must set "PlanarConfiguration" before writing data\fP. -The organization of data has not be defined before the first write. See -.IR TIFFSetField (3TIFF) -for information on how to do this. -.PP -\fB%s: No space for strip arrays"\fP. -There was not enough space for the arrays that hold strip offsets and byte -counts. -.SH "SEE ALSO" -.BR TIFFOpen (3TIFF), -.BR TIFFWriteScanline (3TIFF), -.BR TIFFWriteRawStrip (3TIFF), -.BR libtiff (3TIFF) -.PP -Libtiff library home page: -.BR http://www.remotesensing.org/libtiff/ diff --git a/tiff/man/TIFFWriteEncodedTile.3tiff b/tiff/man/TIFFWriteEncodedTile.3tiff deleted file mode 100755 index 4bb471f..0000000 --- a/tiff/man/TIFFWriteEncodedTile.3tiff +++ /dev/null @@ -1,96 +0,0 @@ -.\" $Id: TIFFWriteEncodedTile.3tiff,v 1.2 2005-11-02 11:07:18 dron Exp $ -.\" -.\" Copyright (c) 1988-1997 Sam Leffler -.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. -.\" -.\" Permission to use, copy, modify, distribute, and sell this software and -.\" its documentation for any purpose is hereby granted without fee, provided -.\" that (i) the above copyright notices and this permission notice appear in -.\" all copies of the software and related documentation, and (ii) the names of -.\" Sam Leffler and Silicon Graphics may not be used in any advertising or -.\" publicity relating to the software without the specific, prior written -.\" permission of Sam Leffler and Silicon Graphics. -.\" -.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -.\" -.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -.\" OF THIS SOFTWARE. -.\" -.if n .po 0 -.TH TIFFWriteEncodedTile 3TIFF "December 16, 1991" "libtiff" -.SH NAME -TIFFWritedEncodedTile \- compress and write a tile of data to an open -.SM TIFF -file -.SH SYNOPSIS -.B "#include <tiffio.h>" -.sp -.BI "tsize_t TIFFWriteEncodedTile(TIFF *" tif ", ttile_t " tile ", tdata_t " buf ", tsize_t " size ")" -.SH DESCRIPTION -Compress -.I size -bytes of raw data from -.I buf -and -.B append -the result to the end of the specified tile. Note that the value of -.I tile -is a ``raw tile number.'' That is, the caller must take into account whether -or not the data are organized in separate places (\c -.IR PlanarConfiguration =2). -.IR TIFFComputeTile -automatically does this when converting an (x,y,z,sample) coordinate quadruple -to a tile number. -.SH NOTES -The library writes encoded data using the native machine byte order. Correctly -implemented -.SM TIFF -readers are expected to do any necessary byte-swapping to correctly process -image data with BitsPerSample greater than 8. -.SH "RETURN VALUES" -\-1 is returned if an error was encountered. Otherwise, the value of -.IR size -is returned. -.SH DIAGNOSTICS -All error messages are directed to the -.BR TIFFError (3TIFF) -routine. -.PP -\fB%s: File not open for writing\fP. -The file was opened for reading, not writing. -.PP -\fBCan not write tiles to a stripped image\fP. -The image is assumed to be organized in strips because neither of the -.I TileWidth -or -.I TileLength -tags have been set with -.BR TIFFSetField (3TIFF). -.PP -\fB%s: Must set "ImageWidth" before writing data\fP. The image's width has not -be set before the first write. See -.BR TIFFSetField (3TIFF) -for information on how to do this. -.PP -\fB%s: Must set "PlanarConfiguration" before writing data\fP. The organization -of data has not be defined before the first write. See -.BR TIFFSetField (3TIFF) -for information on how to do this. -.PP -\fB%s: No space for tile arrays"\fP. -There was not enough space for the arrays that hold tile offsets and byte -counts. -.SH "SEE ALSO" -.BR TIFFOpen (3TIFF), -.BR TIFFWriteTile (3TIFF), -.BR TIFFWriteRawTile (3TIFF), -.BR libtiff (3TIFF) -.PP -Libtiff library home page: -.BR http://www.remotesensing.org/libtiff/ diff --git a/tiff/man/TIFFWriteRawStrip.3tiff b/tiff/man/TIFFWriteRawStrip.3tiff deleted file mode 100755 index 0fed3aa..0000000 --- a/tiff/man/TIFFWriteRawStrip.3tiff +++ /dev/null @@ -1,96 +0,0 @@ -.\" $Id: TIFFWriteRawStrip.3tiff,v 1.2 2005-11-02 11:07:18 dron Exp $ -.\" -.\" Copyright (c) 1988-1997 Sam Leffler -.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. -.\" -.\" Permission to use, copy, modify, distribute, and sell this software and -.\" its documentation for any purpose is hereby granted without fee, provided -.\" that (i) the above copyright notices and this permission notice appear in -.\" all copies of the software and related documentation, and (ii) the names of -.\" Sam Leffler and Silicon Graphics may not be used in any advertising or -.\" publicity relating to the software without the specific, prior written -.\" permission of Sam Leffler and Silicon Graphics. -.\" -.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -.\" -.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -.\" OF THIS SOFTWARE. -.\" -.if n .po 0 -.TH TIFFWriteRawstrip 3TIFF "October 15, 1995" "libtiff" -.SH NAME -TIFFWriteRawStrip \- write a strip of raw data to an open -.SM TIFF -file -.SH SYNOPSIS -.B "#include <tiffio.h>" -.sp -.BI "tsize_t TIFFWriteRawStrip(TIFF *" tif ", tstrip_t " strip ", tdata_t " buf ", tsize_t " size ")" -.SH DESCRIPTION -Append -.I size -bytes of raw data to the specified strip. -.SH NOTES -The strip number must be valid according to the current settings of the -.I ImageLength -and -.I RowsPerStrip -tags. -An image may be dynamically grown by increasing the value of -.I ImageLength -prior to each call to -.IR TIFFWriteRawStrip . -.SH "RETURN VALUES" -\-1 is returned if an error occurred. -Otherwise, the value of -.IR size -is returned. -.SH DIAGNOSTICS -All error messages are directed to the -.BR TIFFError (3TIFF) -routine. -.PP -\fB%s: File not open for writing\fP. -The file was opened for reading, not writing. -.PP -\fBCan not write scanlines to a tiled image\fP. The image is assumed to be -organized in tiles because the -.I TileWidth -and -.I TileLength -tags have been set with -.BR TIFFSetField (3TIFF). -.PP -\fB%s: Must set "ImageWidth" before writing data\fP. -The image's width has not be set before the first write. -See -.BR TIFFSetField (3TIFF) -for information on how to do this. -.PP -\fB%s: Must set "PlanarConfiguration" before writing data\fP. -The organization of data has not be defined before the first write. -See -.BR TIFFSetField (3TIFF) -for information on how to do this. -.PP -\fB%s: No space for strip arrays"\fP. -There was not enough space for the arrays that hold strip -offsets and byte counts. -.PP -\fB%s: Strip %d out of range, max %d\fP. -The specified strip is not a valid strip according to the -currently specified image dimensions. -.SH "SEE ALSO" -.BR TIFFOpen (3TIFF), -.BR TIFFWriteEncodedStrip (3TIFF), -.BR TIFFWriteScanline (3TIFF), -.BR libtiff (3TIFF) -.PP -Libtiff library home page: -.BR http://www.remotesensing.org/libtiff/ diff --git a/tiff/man/TIFFWriteRawTile.3tiff b/tiff/man/TIFFWriteRawTile.3tiff deleted file mode 100755 index d422e58..0000000 --- a/tiff/man/TIFFWriteRawTile.3tiff +++ /dev/null @@ -1,84 +0,0 @@ -.\" $Id: TIFFWriteRawTile.3tiff,v 1.2 2005-11-02 11:07:18 dron Exp $ -.\" -.\" Copyright (c) 1988-1997 Sam Leffler -.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. -.\" -.\" Permission to use, copy, modify, distribute, and sell this software and -.\" its documentation for any purpose is hereby granted without fee, provided -.\" that (i) the above copyright notices and this permission notice appear in -.\" all copies of the software and related documentation, and (ii) the names of -.\" Sam Leffler and Silicon Graphics may not be used in any advertising or -.\" publicity relating to the software without the specific, prior written -.\" permission of Sam Leffler and Silicon Graphics. -.\" -.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -.\" -.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -.\" OF THIS SOFTWARE. -.\" -.if n .po 0 -.TH TIFFWriteRawtile 3TIFF "December 16, 1991" "libtiff" -.SH NAME -TIFFWriteRawTile \- write a tile of raw data to an open -.SM TIFF -file -.SH SYNOPSIS -.B "#include <tiffio.h>" -.sp -.BI "tsize_t TIFFWriteRawTile(TIFF *" tif ", ttile_t " tile ", tdata_t " buf ", tsize_t " size ")" -.SH DESCRIPTION -Append -.I size -bytes of raw data to the specified tile. -.SH "RETURN VALUES" -\-1 is returned if an error occurred. Otherwise, the value of -.IR size -is returned. -.SH DIAGNOSTICS -All error messages are directed to the -.BR TIFFError (3TIFF) -routine. -.PP -\fB%s: File not open for writing\fP. -The file was opened for reading, not writing. -.PP -\fBCan not write tiles to a stripped image\fP. -The image is assumed to be organized in strips because neither of the -.I TileWidth -or -.I TileLength -tags have been set with -.BR TIFFSetField (3TIFF). -.PP -\fB%s: Must set "ImageWidth" before writing data\fP. -The image's width has not be set before the first write. -See -.BR TIFFSetField (3TIFF) -for information on how to do this. -.PP -\fB%s: Must set "PlanarConfiguration" before writing data\fP. The organization -of data has not be defined before the first write. See -.BR TIFFSetField (3TIFF) -for information on how to do this. -.PP -\fB%s: No space for tile arrays"\fP. -There was not enough space for the arrays that hold tile offsets and byte -counts. -.PP -\fB%s: Specified tile %d out of range, max %d\fP. -The specified tile is not valid according to the currently specified image -dimensions. -.SH "SEE ALSO" -.BR TIFFOpen (3TIFF), -.BR TIFFWriteEncodedTile (3TIFF), -.BR TIFFWriteScanline (3TIFF), -.BR libtiff (3TIFF) -.PP -Libtiff library home page: -.BR http://www.remotesensing.org/libtiff/ diff --git a/tiff/man/TIFFWriteScanline.3tiff b/tiff/man/TIFFWriteScanline.3tiff deleted file mode 100755 index 0dd35f5..0000000 --- a/tiff/man/TIFFWriteScanline.3tiff +++ /dev/null @@ -1,154 +0,0 @@ -.\" $Id: TIFFWriteScanline.3tiff,v 1.2 2005-11-02 11:07:18 dron Exp $ -.\" -.\" Copyright (c) 1988-1997 Sam Leffler -.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. -.\" -.\" Permission to use, copy, modify, distribute, and sell this software and -.\" its documentation for any purpose is hereby granted without fee, provided -.\" that (i) the above copyright notices and this permission notice appear in -.\" all copies of the software and related documentation, and (ii) the names of -.\" Sam Leffler and Silicon Graphics may not be used in any advertising or -.\" publicity relating to the software without the specific, prior written -.\" permission of Sam Leffler and Silicon Graphics. -.\" -.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -.\" -.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -.\" OF THIS SOFTWARE. -.\" -.if n .po 0 -.TH TIFFWriteScanline 3TIFF "December 16, 1991" "libtiff" -.SH NAME -TIFFWriteScanline \- write a scanline to an open -.SM TIFF -file -.SH SYNOPSIS -.B "#include <tiffio.h>" -.sp -.BI "int TIFFWriteScanline(TIFF *" tif ", tdata_t " buf ", uint32 " row ", tsample_t " sample ")" -.SH DESCRIPTION -Write data to a file at the specified row. The -.I sample -parameter is used only if data are organized in separate planes (\c -.IR PlanarConfiguration =2). -The data are assumed to be uncompressed and in the native bit- and byte-order -of the host machine. The data written to the file is compressed according to -the compression scheme of the current -.SM TIFF -directory (see further below). If the current scanline is past the end of the -current subfile, the -.I ImageLength -field is automatically increased to include the scanline (except -for -.IR PlanarConfiguration =2, -where the -.I ImageLength -cannot be changed once the first data are written). If the -.I ImageLength -is increased, the -.I StripOffsets -and -.I StripByteCounts -fields are similarly enlarged to reflect data written past the previous end of -image. -.SH NOTES -The library writes encoded data using the native machine byte order. Correctly -implemented -.SM TIFF -readers are expected to do any necessary byte-swapping to correctly process -image data with BitsPerSample greater than 8. The library attempts to hide -bit-ordering differences between the image and the native machine by -converting data from the native machine order. -.PP -In C++ the -.I sample -parameter defaults to 0. -.PP -Once data are written to a file for the current directory, the values of -certain tags may not be altered; see -.IR TIFFSetField (3TIFF) -for more information. -.PP -It is not possible to write scanlines to a file that uses a tiled -organization. The routine -.IR TIFFIsTiled -can be used to determine if the file is organized as tiles or strips. -.SH "RETURN VALUES" -.IR TIFFWriteScanline -returns \-1 if it immediately detects an error and 1 for a successful write. -.SH DIAGNOSTICS -All error messages are directed to the -.IR TIFFError (3TIFF) -routine. -.PP -.BR "%s: File not open for writing . -The file was opened for reading, not writing. -.PP -.BR "Can not write scanlines to a tiled image" . -An attempt was made to write a scanline to a tiled image. The image is assumed -to be organized in tiles because the -.I TileWidth -and -.I TileLength -tags have been set with -.IR TIFFSetField (3TIFF). -.PP -.BR "Compression algorithm does not support random access" . -Data was written in a non-sequential order to a file that uses a compression -algorithm and that has -.I RowsPerStrip -greater than one. That is, data in the image is to be stored in a compressed -form, and with multiple rows packed into a strip. In this case, the library -does not support random access to the data. The data should either be written -as entire strips, sequentially by rows, or the value of -.I RowsPerStrip -should be set to one. -.PP -\fB%s: Must set "ImageWidth" before writing data\fP. -The image's width has not be set before the first write. -See -.BR TIFFSetField (3TIFF) -for information on how to do this. -.PP -\fB%s: Must set "PlanarConfiguration" before writing data\fP. -The organization of data has not be defined before the first write. -See -.BR TIFFSetField (3TIFF) -for information on how to do this. -.PP -\fBCan not change "ImageLength" when using separate planes\fP. Separate image -planes are being used (\c -.IR PlanarConfiguration =2), -but the number of rows has not been specified before the first write. The -library supports the dynamic growth of an image only when data are organized -in a contiguous manner (\c -.IR PlanarConfiguration =1). -.PP -.BR "%d: Sample out of range, max %d" . -The -.I sample -parameter was greater than the value of the SamplesPerPixel tag. -.PP -.BR "%s: No space for strip arrays . -There was not enough space for the arrays that hold strip offsets and byte -counts. -.SH BUGS -Writing subsampled YCbCR data does not work correctly because, for -.IR PlanarConfiguration =2 -the size of a scanline is not calculated on a per-sample basis, and for -.IR PlanarConfiguration =1 -the library does not pack the block-interleaved samples. -.SH "SEE ALSO" -.BR TIFFOpen (3TIFF), -.BR TIFFWriteEncodedStrip (3TIFF), -.BR TIFFWriteRawStrip (3TIFF), -.BR libtiff (3TIFF) -.PP -Libtiff library home page: -.BR http://www.remotesensing.org/libtiff/ diff --git a/tiff/man/TIFFWriteTile.3tiff b/tiff/man/TIFFWriteTile.3tiff deleted file mode 100755 index 08250f7..0000000 --- a/tiff/man/TIFFWriteTile.3tiff +++ /dev/null @@ -1,77 +0,0 @@ -.\" $Id: TIFFWriteTile.3tiff,v 1.2 2005-11-02 11:07:18 dron Exp $ -.\" -.\" Copyright (c) 1988-1997 Sam Leffler -.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. -.\" -.\" Permission to use, copy, modify, distribute, and sell this software and -.\" its documentation for any purpose is hereby granted without fee, provided -.\" that (i) the above copyright notices and this permission notice appear in -.\" all copies of the software and related documentation, and (ii) the names of -.\" Sam Leffler and Silicon Graphics may not be used in any advertising or -.\" publicity relating to the software without the specific, prior written -.\" permission of Sam Leffler and Silicon Graphics. -.\" -.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -.\" -.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -.\" OF THIS SOFTWARE. -.\" -.if n .po 0 -.TH TIFFWriteTile 3TIFF "November 29, 1999" "libtiff" -.SH NAME -TIFFWriteTile \- encode and write a tile of data to an open -.SM TIFF -file -.SH SYNOPSIS -.B "#include <tiffio.h>" -.sp -.BI "tsize_t TIFFWriteTile(TIFF *" tif ", tdata_t " buf ", uint32 " x ", uint32 " y ", uint32 " z ", tsample_t " sample ")" -.SH DESCRIPTION -Write the data for the tile -.I containing -the specified coordinates. The data in -.I buf -are is (potentially) compressed, and written to the indicated file, normally -being appended to the end of the file. The buffer must be contain an entire -tile of data. Applications should call the routine -.IR TIFFTileSize -to find out the size (in bytes) of a tile buffer. The -.I x -and -.I y -parameters are always used by -.IR TIFFWriteTile . -The -.I z -parameter is used if the image is deeper than 1 slice (\c -.IR ImageDepth >1). -The -.I sample -parameter is used only if data are organized in separate planes (\c -.IR PlanarConfiguration =2). -.SH "RETURN VALUES" -.IR TIFFWriteTile -returns \-1 if it detects an error; otherwise the number of bytes in the tile -is returned. -.SH DIAGNOSTICS -All error messages are directed to the -.BR TIFFError (3TIFF) -routine. -.SH "SEE ALSO" -.BR TIFFCheckTile (3TIFF), -.BR TIFFComputeTile (3TIFF), -.BR TIFFOpen (3TIFF), -.BR TIFFReadTile (3TIFF), -.BR TIFFWriteScanline (3TIFF), -.BR TIFFWriteEncodedTile (3TIFF), -.BR TIFFWriteRawTile (3TIFF), -.BR libtiff (3TIFF) -.PP -Libtiff library home page: -.BR http://www.remotesensing.org/libtiff/ diff --git a/tiff/man/TIFFbuffer.3tiff b/tiff/man/TIFFbuffer.3tiff deleted file mode 100755 index a4446cd..0000000 --- a/tiff/man/TIFFbuffer.3tiff +++ /dev/null @@ -1,77 +0,0 @@ -.\" $Id: TIFFbuffer.3tiff,v 1.2 2005-11-02 11:07:18 dron Exp $ -.\" -.\" Copyright (c) 1995 Sam Leffler -.\" Copyright (c) 1995 Silicon Graphics, Inc. -.\" -.\" Permission to use, copy, modify, distribute, and sell this software and -.\" its documentation for any purpose is hereby granted without fee, provided -.\" that (i) the above copyright notices and this permission notice appear in -.\" all copies of the software and related documentation, and (ii) the names of -.\" Sam Leffler and Silicon Graphics may not be used in any advertising or -.\" publicity relating to the software without the specific, prior written -.\" permission of Sam Leffler and Silicon Graphics. -.\" -.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -.\" -.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -.\" OF THIS SOFTWARE. -.\" -.if n .po 0 -.TH TIFFBUFFER 3TIFF "November 1, 2005" "libtiff" -.SH NAME -TIFFReadBufferSetup, TIFFWriteBufferSetup \- I/O buffering control routines -.SH SYNOPSIS -.nf -.B "#include <tiffio.h>" -.sp -.BI "int TIFFReadBufferSetup(TIFF *" tif ", tdata_t " buffer ", tsize_t " size ");" -.BI "int TIFFWriteBufferSetup(TIFF *" tif ", tdata_t " buffer ", tsize_t " size ");" -.fi -.SH DESCRIPTION -The following routines are provided for client-control of the I/O buffers used -by the library. Applications need never use these routines; they are provided -only for ``intelligent clients'' that wish to optimize memory usage and/or -eliminate potential copy operations that can occur when working with images -that have data stored without compression. -.PP -.I TIFFReadBufferSetup -sets up the data buffer used to read raw (encoded) data from a file. If the -specified pointer is -.SM NULL -(zero), then a buffer of the appropriate size is allocated. Otherwise the -caller must guarantee that the buffer is large enough to hold any individual -strip of raw data. -.I TIFFReadBufferSetup -returns a non-zero value if the setup was successful and zero otherwise. -.PP -.I TIFFWriteBufferSetup -sets up the data buffer used to write raw (encoded) data to a file. If the -specified -.I size -is \-1 then the buffer size is selected to hold a complete tile or strip, or -at least 8 kilobytes, whichever is greater. If the specified -.I buffer -is -.SM NULL -(zero), then a buffer of the appropriate size is dynamically allocated. -.I TIFFWriteBufferSetup -returns a non-zero value if the setup was successful and zero otherwise. -.SH DIAGNOSTICS -.BR "%s: No space for data buffer at scanline %ld" . -.I TIFFReadBufferSetup -was unable to dynamically allocate space for a data buffer. -.PP -.BR "%s: No space for output buffer" . -.I TIFFWriteBufferSetup -was unable to dynamically allocate space for a data buffer. -.SH "SEE ALSO" -.BR libtiff (3TIFF) -.PP -Libtiff library home page: -.BR http://www.remotesensing.org/libtiff/ diff --git a/tiff/man/TIFFcodec.3tiff b/tiff/man/TIFFcodec.3tiff deleted file mode 100755 index 78a0f02..0000000 --- a/tiff/man/TIFFcodec.3tiff +++ /dev/null @@ -1,82 +0,0 @@ -.\" $Id: TIFFcodec.3tiff,v 1.3 2011-08-02 14:09:43 bfriesen Exp $ -.\" -.\" Copyright (c) 1995 Sam Leffler -.\" Copyright (c) 1995 Silicon Graphics, Inc. -.\" -.\" Permission to use, copy, modify, distribute, and sell this software and -.\" its documentation for any purpose is hereby granted without fee, provided -.\" that (i) the above copyright notices and this permission notice appear in -.\" all copies of the software and related documentation, and (ii) the names of -.\" Sam Leffler and Silicon Graphics may not be used in any advertising or -.\" publicity relating to the software without the specific, prior written -.\" permission of Sam Leffler and Silicon Graphics. -.\" -.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -.\" -.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -.\" OF THIS SOFTWARE. -.\" -.if n .po 0 -.TH CODEC 3TIFF "October 29, 2004" "libtiff" -.SH NAME -TIFFFindCODEC, TIFFRegisterCODEC, TIFFUnRegisterCODEC, TIFFIsCODECConfigured -\- codec-related utility routines -.SH SYNOPSIS -.B "#include <tiffio.h>" -.sp -.BI "const TIFFCodec* TIFFFindCODEC(uint16 " scheme ");" -.br -.BI "TIFFCodec* TIFFRegisterCODEC(uint16 " scheme ", const char *" method ", TIFFInitMethod " init ");" -.br -.BI "void TIFFUnRegisterCODEC(TIFFCodec *" codec ");" -.br -.BI "int TIFFIsCODECConfigured(uint16 " scheme ");" -.SH DESCRIPTION -.I libtiff -supports a variety of compression schemes implemented by software -.IR codecs . -Each codec adheres to a modular interface that provides for -the decoding and encoding of image data; as well as some other -methods for initialization, setup, cleanup, and the control -of default strip and tile sizes. -Codecs are identified by the associated value of the -.SM TIFF -.I Compression -tag; e.g. 5 for -.SM LZW -compression. -.PP -The -.I TIFFRegisterCODEC -routine can be used to -augment or override the set of codecs available to an application. -If the specified -.I scheme -already has a registered codec then it is -.I overridden -and any images with data encoded with this -compression scheme will be decoded using the supplied codec. -.PP -.I TIFFIsCODECConfigured -returns 1 if the codec is configured and working. Otherwise 0 will be returned. -.SH DIAGNOSTICS -.BR "No space to register compression scheme %s" . -.I TIFFRegisterCODEC -was unable to allocate memory for the data structures needed -to register a codec. -.PP -.BR "Cannot remove compression scheme %s; not registered" . -.I TIFFUnRegisterCODEC -did not locate the specified codec in the table of registered -compression schemes. -.SH "SEE ALSO" -.BR libtiff (3TIFF) -.PP -Libtiff library home page: -.BR http://www.remotesensing.org/libtiff/ diff --git a/tiff/man/TIFFcolor.3tiff b/tiff/man/TIFFcolor.3tiff deleted file mode 100755 index e5d2727..0000000 --- a/tiff/man/TIFFcolor.3tiff +++ /dev/null @@ -1,268 +0,0 @@ -.\" $Id: TIFFcolor.3tiff,v 1.4 2009-11-30 12:22:26 fwarmerdam Exp $ -.\" -.\" Copyright (c) 2003, Andrey Kiselev <dron@ak4719.spb.edu> -.\" -.\" Permission to use, copy, modify, distribute, and sell this software and -.\" its documentation for any purpose is hereby granted without fee, provided -.\" that (i) the above copyright notices and this permission notice appear in -.\" all copies of the software and related documentation, and (ii) the names of -.\" Sam Leffler and Silicon Graphics may not be used in any advertising or -.\" publicity relating to the software without the specific, prior written -.\" permission of Sam Leffler and Silicon Graphics. -.\" -.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -.\" -.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -.\" OF THIS SOFTWARE. -.\" -.if n .po 0 -.TH COLOR 3TIFF "December 21, 2003" "libtiff" -.SH NAME -TIFFYCbCrToRGBInit, TIFFYCbCrtoRGB, TIFFCIELabToRGBInit, TIFFCIELabToXYZ, -TIFFXYZToRGB \- color conversion routines. -.SH SYNOPSIS -.B "#include <tiffio.h>" -.sp -.BI "int TIFFYCbCrToRGBInit(TIFFYCbCrToRGB *" ycbcr ", float *" luma ", float *"refBlackWhite" );" -.br -.BI "void TIFFYCbCrtoRGB(TIFFYCbCrToRGB *" ycbcr ", uint32 " Y ", int32 " Cb ", int32 " Cr ", uint32 *" R ", uint32 *" G ", uint32 *" B " );" -.sp -.BI "int TIFFCIELabToRGBInit(TIFFCIELabToRGB *" cielab ", const TIFFDisplay *" display ", float *" refWhite ");" -.br -.BI "void TIFFCIELabToXYZ(TIFFCIELabToRGB *" cielab ", uint32 " L ", int32 " a ", int32 " b ", float *" X ", float *" Y ", float *" Z ");" -.br -.BI "void TIFFXYZToRGB(TIFFCIELabToRGB *" cielab ", float " X ", float " Y ", float " Z" , uint32 *" R ", uint32 *" G ", uint32 *" B ");" -.SH DESCRIPTION -TIFF supports several color spaces for images stored in that format. There is -usually a problem of application to handle the data properly and convert -between different colorspaces for displaying and printing purposes. To -simplify this task libtiff implements several color conversion routines -itself. In particular, these routines used in -.B TIFFRGBAImage(3TIFF) -interface. -.PP -.B TIFFYCbCrToRGBInit() -used to initialize -.I YCbCr -to -.I RGB -conversion state. Allocating and freeing of the -.I ycbcr -structure belongs to programmer. -.I TIFFYCbCrToRGB -defined in -.B tiffio.h -as -.PP -.RS -.nf -typedef struct { /* YCbCr->RGB support */ - TIFFRGBValue* clamptab; /* range clamping table */ - int* Cr_r_tab; - int* Cb_b_tab; - int32* Cr_g_tab; - int32* Cb_g_tab; - int32* Y_tab; -} TIFFYCbCrToRGB; -.fi -.RE -.PP -.I luma -is a float array of three values representing proportions of the red, green -and blue in luminance, Y (see section 21 of the TIFF 6.0 specification, where -the YCbCr images discussed). -.I TIFFTAG_YCBCRCOEFFICIENTS -holds that values in TIFF file. -.I refBlackWhite -is a float array of 6 values which specifies a pair of headroom and footroom -image data values (codes) for each image component (see section 20 of the -TIFF 6.0 specification where the colorinmetry fields discussed). -.I TIFFTAG_REFERENCEBLACKWHITE -is responsible for storing these values in TIFF file. Following code snippet -should helps to understand the the technique: -.PP -.RS -.nf -float *luma, *refBlackWhite; -uint16 hs, vs; - -/* Initialize structures */ -ycbcr = (TIFFYCbCrToRGB*) - _TIFFmalloc(TIFFroundup(sizeof(TIFFYCbCrToRGB), sizeof(long)) - + 4*256*sizeof(TIFFRGBValue) - + 2*256*sizeof(int) - + 3*256*sizeof(int32)); -if (ycbcr == NULL) { - TIFFError("YCbCr->RGB", - "No space for YCbCr->RGB conversion state"); - exit(0); -} - -TIFFGetFieldDefaulted(tif, TIFFTAG_YCBCRCOEFFICIENTS, &luma); -TIFFGetFieldDefaulted(tif, TIFFTAG_REFERENCEBLACKWHITE, &refBlackWhite); -if (TIFFYCbCrToRGBInit(ycbcr, luma, refBlackWhite) < 0) - exit(0); - -/* Start conversion */ -uint32 r, g, b; -uint32 Y; -int32 Cb, Cr; - -for each pixel in image - TIFFYCbCrtoRGB(img->ycbcr, Y, Cb, Cr, &r, &g, &b); - -/* Free state structure */ -_TIFFfree(ycbcr); -.fi -.RE -.PP - -.PP -.B TIFFCIELabToRGBInit() -initializes the -.I CIE L*a*b* 1976 -to -.I RGB -conversion state. -.B TIFFCIELabToRGB -defined as -.PP -.RS -.nf -#define CIELABTORGB_TABLE_RANGE 1500 - -typedef struct { /* CIE Lab 1976->RGB support */ - int range; /* Size of conversion table */ - float rstep, gstep, bstep; - float X0, Y0, Z0; /* Reference white point */ - TIFFDisplay display; - float Yr2r[CIELABTORGB_TABLE_RANGE + 1]; /* Conversion of Yr to r */ - float Yg2g[CIELABTORGB_TABLE_RANGE + 1]; /* Conversion of Yg to g */ - float Yb2b[CIELABTORGB_TABLE_RANGE + 1]; /* Conversion of Yb to b */ -} TIFFCIELabToRGB; -.fi -.RE -.PP -.I display -is a display device description, declared as -.PP -.RS -.nf -typedef struct { - float d_mat[3][3]; /* XYZ -> luminance matrix */ - float d_YCR; /* Light o/p for reference white */ - float d_YCG; - float d_YCB; - uint32 d_Vrwr; /* Pixel values for ref. white */ - uint32 d_Vrwg; - uint32 d_Vrwb; - float d_Y0R; /* Residual light for black pixel */ - float d_Y0G; - float d_Y0B; - float d_gammaR; /* Gamma values for the three guns */ - float d_gammaG; - float d_gammaB; -} TIFFDisplay; -.fi -.RE -.PP -For example, the one can use sRGB device, which has the following parameters: -.PP -.RS -.nf -TIFFDisplay display_sRGB = { - { /* XYZ -> luminance matrix */ - { 3.2410F, -1.5374F, -0.4986F }, - { -0.9692F, 1.8760F, 0.0416F }, - { 0.0556F, -0.2040F, 1.0570F } - }, - 100.0F, 100.0F, 100.0F, /* Light o/p for reference white */ - 255, 255, 255, /* Pixel values for ref. white */ - 1.0F, 1.0F, 1.0F, /* Residual light o/p for black pixel */ - 2.4F, 2.4F, 2.4F, /* Gamma values for the three guns */ -}; -.fi -.RE -.PP -.I refWhite -is a color temperature of the reference white. The -.I TIFFTAG_WHITEPOINT -contains the chromaticity of the white point of the image from where the -reference white can be calculated using following formulae: -.PP -.RS -refWhite_Y = 100.0 -.br -refWhite_X = whitePoint_x / whitePoint_y * refWhite_Y -.br -refWhite_Z = (1.0 - whitePoint_x - whitePoint_y) / whitePoint_y * refWhite_X -.br -.RE -.PP -The conversion itself performed in two steps: at the first one we will convert -.I CIE L*a*b* 1976 -to -.I CIE XYZ -using -.B TIFFCIELabToXYZ() -routine, and at the second step we will convert -.I CIE XYZ -to -.I RGB -using -.B TIFFXYZToRGB(). -Look at the code sample below: -.PP -.RS -.nf -float *whitePoint; -float refWhite[3]; - -/* Initialize structures */ -img->cielab = (TIFFCIELabToRGB *) - _TIFFmalloc(sizeof(TIFFCIELabToRGB)); -if (!cielab) { - TIFFError("CIE L*a*b*->RGB", - "No space for CIE L*a*b*->RGB conversion state."); - exit(0); -} - -TIFFGetFieldDefaulted(tif, TIFFTAG_WHITEPOINT, &whitePoint); -refWhite[1] = 100.0F; -refWhite[0] = whitePoint[0] / whitePoint[1] * refWhite[1]; -refWhite[2] = (1.0F - whitePoint[0] - whitePoint[1]) - / whitePoint[1] * refWhite[1]; -if (TIFFCIELabToRGBInit(cielab, &display_sRGB, refWhite) < 0) { - TIFFError("CIE L*a*b*->RGB", - "Failed to initialize CIE L*a*b*->RGB conversion state."); - _TIFFfree(cielab); - exit(0); -} - -/* Now we can start to convert */ -uint32 r, g, b; -uint32 L; -int32 a, b; -float X, Y, Z; - -for each pixel in image - TIFFCIELabToXYZ(cielab, L, a, b, &X, &Y, &Z); - TIFFXYZToRGB(cielab, X, Y, Z, &r, &g, &b); - -/* Don't forget to free the state structure */ -_TIFFfree(cielab); -.fi -.RE -.PP -.SH "SEE ALSO" -.BR TIFFRGBAImage (3TIFF) -.BR libtiff (3TIFF), -.PP -Libtiff library home page: -.BR http://www.remotesensing.org/libtiff/ diff --git a/tiff/man/TIFFmemory.3tiff b/tiff/man/TIFFmemory.3tiff deleted file mode 100755 index 55f446b..0000000 --- a/tiff/man/TIFFmemory.3tiff +++ /dev/null @@ -1,90 +0,0 @@ -.\" $Id: TIFFmemory.3tiff,v 1.2 2005-11-02 11:07:18 dron Exp $ -.\" -.\" Copyright (c) 1995 Sam Leffler -.\" Copyright (c) 1995 Silicon Graphics, Inc. -.\" -.\" Permission to use, copy, modify, distribute, and sell this software and -.\" its documentation for any purpose is hereby granted without fee, provided -.\" that (i) the above copyright notices and this permission notice appear in -.\" all copies of the software and related documentation, and (ii) the names of -.\" Sam Leffler and Silicon Graphics may not be used in any advertising or -.\" publicity relating to the software without the specific, prior written -.\" permission of Sam Leffler and Silicon Graphics. -.\" -.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -.\" -.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -.\" OF THIS SOFTWARE. -.\" -.if n .po 0 -.TH MEMORY 3TIFF "October 15, 1995" "libtiff" -.SH NAME -_TIFFmalloc, \c -_TIFFrealloc, \c -_TIFFfree, \c -_TIFFmemset, \c -_TIFFmemcpy, \c -_TIFFmemcmp, \c -\- memory management-related functions for use with -.SM TIFF -files -.SH SYNOPSIS -.B "#include <tiffio.h>" -.sp -.BI "tdata_t _TIFFmalloc(tsize_t " size ");" -.br -.BI "tdata_t _TIFFrealloc(tdata_t " buffer ", tsize_t " size ");" -.br -.BI "void _TIFFfree(tdata_t " buffer ");" -.br -.BI "void _TIFFmemset(tdata_t " s ", int " c ", tsize_t " n ");" -.br -.BI "void _TIFFmemcpy(tdata_t " dest ", const tdata_t " src ", tsize_t " n ");" -.br -.BI "int _TIFFmemcmp(const tdata_t " s1 ", const tdata_t "s2 ", tsize_t " n ");" -.SH DESCRIPTION -These routines are provided for writing portable software that uses -.IR libtiff ; -they hide any memory-management related issues, such as dealing with segmented -architectures found on 16-bit machines. -.PP -.I _TIFFmalloc -and -.I _TIFFrealloc -are used to dynamically allocate and reallocate memory used by -.IR libtiff ; -such as memory passed into the I/O routines. Memory allocated through these -interfaces is released back to the system using the -.I _TIFFfree -routine. -.PP -Memory allocated through one of the above interfaces can be set to a known -value using -.IR _TIFFmemset , -copied to another memory location using -.IR _TIFFmemcpy , -or compared for equality using -.IR _TIFFmemcmp . -These routines conform to the equivalent -.SM ANSI -C routines: -.IR memset , -.IR memcpy , -and -.IR memcmp , -repsectively. -.SH DIAGNOSTICS -None. -.SH "SEE ALSO" -.BR malloc (3), -.BR memory (3), -.BR libtiff (3TIFF) -.PP -Libtiff library home page: -.BR http://www.remotesensing.org/libtiff/ diff --git a/tiff/man/TIFFquery.3tiff b/tiff/man/TIFFquery.3tiff deleted file mode 100755 index 8bddc88..0000000 --- a/tiff/man/TIFFquery.3tiff +++ /dev/null @@ -1,142 +0,0 @@ -.\" $Id: TIFFquery.3tiff,v 1.1 2004-11-11 14:39:16 dron Exp $ -.\" -.\" Copyright (c) 1988-1997 Sam Leffler -.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. -.\" -.\" Permission to use, copy, modify, distribute, and sell this software and -.\" its documentation for any purpose is hereby granted without fee, provided -.\" that (i) the above copyright notices and this permission notice appear in -.\" all copies of the software and related documentation, and (ii) the names of -.\" Sam Leffler and Silicon Graphics may not be used in any advertising or -.\" publicity relating to the software without the specific, prior written -.\" permission of Sam Leffler and Silicon Graphics. -.\" -.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -.\" -.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -.\" OF THIS SOFTWARE. -.\" -.if n .po 0 -.TH QUERY 3TIFF "October 29, 2004" "libtiff" -.SH NAME -TIFFCurrentRow, -TIFFCurrentStrip, -TIFFCurrentTile, -TIFFCurrentDirectory, -TIFFLastDirectory, -TIFFFileno, -TIFFFileName, -TIFFGetMode, -TIFFIsTiled, -TIFFIsByteSwapped, -TIFFIsUpSampled, -TIFFIsMSB2LSB, -TIFFGetVersion -\- query routines -.SH SYNOPSIS -.B "#include <tiffio.h>" -.sp -.BI "uint32 TIFFCurrentRow(TIFF* " tif ")" -.br -.BI "tstrip_t TIFFCurrentStrip(TIFF* " tif ")" -.br -.BI "ttile_t TIFFCurrentTile(TIFF* " tif ")" -.br -.BI "tdir_t TIFFCurrentDirectory(TIFF* " tif ")" -.br -.BI "int TIFFLastDirectory(TIFF* " tif ")" -.br -.BI "int TIFFFileno(TIFF* " tif ")" -.br -.BI "char* TIFFFileName(TIFF* " tif ")" -.br -.BI "int TIFFGetMode(TIFF* " tif ")" -.br -.BI "int TIFFIsTiled(TIFF* " tif ")" -.br -.BI "int TIFFIsByteSwapped(TIFF* " tif ")" -.br -.BI "int TIFFIsUpSampled(TIFF* " tif ")" -.br -.BI "int TIFFIsMSB2LSB(TIFF* " tif ")" -.br -.BI "const char* TIFFGetVersion(void)" -.SH DESCRIPTION -The following routines return status information about an open -.SM TIFF -file. -.PP -.IR TIFFCurrentDirectory -returns the index of the current directory (directories are numbered starting -at 0). This number is suitable for use with the -.IR TIFFSetDirectory -routine. -.PP -.IR TIFFLastDirectory -returns a non-zero value if the current directory is the last directory in the -file; otherwise zero is returned. -.PP -.IR TIFFCurrentRow , -.IR TIFFCurrentStrip , -and -.IR TIFFCurrentTile , -return the current row, strip, and tile, respectively, that is being read or -written. These values are updated each time a read or write is done. -.PP -.IR TIFFFileno -returns the underlying file descriptor used to access the -.SM TIFF -image in the filesystem. -.PP -.IR TIFFFileName -returns the pathname argument passed to -.IR TIFFOpen -or -.IR TIFFFdOpen . -.PP -.IR TIFFGetMode -returns the mode with which the underlying file was opened. On -.SM UNIX -systems, this is the value passed to the -.IR open (2) -system call. -.PP -.IR TIFFIsTiled -returns a non-zero value if the image data has a tiled organization. Zero is -returned if the image data is organized in strips. -.PP -.IR TIFFIsByteSwapped -returns a non-zero value if the image data was in a different byte-order than -the host machine. Zero is returned if the TIFF file and local host byte-orders -are the same. Note that TIFFReadTile(), TIFFReadStrip() and -TIFFReadScanline() functions already normally perform byte swapping to local -host order if needed. -.PP -.I TIFFIsUpSampled -returns a non-zero value if image data returned through the read interface -routines is being up-sampled. This can be useful to applications that want to -calculate I/O buffer sizes to reflect this usage (though the usual strip and -tile size routines already do this). -.PP -.I TIFFIsMSB2LSB -returns a non-zero value if the image data is being returned with bit 0 as the -most significant bit. -.PP -.IR TIFFGetVersion -returns an -.SM ASCII -string that has a version stamp for the -.SM TIFF -library software. -.SH DIAGNOSTICS -None. -.SH "SEE ALSO" -.IR libtiff (3TIFF), -.IR TIFFOpen (3TIFF), -.IR TIFFFdOpen (3TIFF) diff --git a/tiff/man/TIFFsize.3tiff b/tiff/man/TIFFsize.3tiff deleted file mode 100755 index 6de9084..0000000 --- a/tiff/man/TIFFsize.3tiff +++ /dev/null @@ -1,59 +0,0 @@ -.\" $Id: TIFFsize.3tiff,v 1.2 2005-11-02 11:07:18 dron Exp $ -.\" -.\" Copyright (c) 1988-1997 Sam Leffler -.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. -.\" -.\" Permission to use, copy, modify, distribute, and sell this software and -.\" its documentation for any purpose is hereby granted without fee, provided -.\" that (i) the above copyright notices and this permission notice appear in -.\" all copies of the software and related documentation, and (ii) the names of -.\" Sam Leffler and Silicon Graphics may not be used in any advertising or -.\" publicity relating to the software without the specific, prior written -.\" permission of Sam Leffler and Silicon Graphics. -.\" -.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -.\" -.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -.\" OF THIS SOFTWARE. -.\" -.if n .po 0 -.TH TIFFSIZE 3TIFF "October 15, 1995" "libtiff" -.SH NAME -TIFFScanlineSize, TIFFRasterScanlineSize, -\- return the size of various items associated with an open -.SM TIFF -file -.SH SYNOPSIS -.B "#include <tiffio.h>" -.sp -.BI "tsize_t TIFFRasterScanlineSize(TIFF *" tif ")" -.br -.BI "tsize_t TIFFScanlineSize(TIFF *" tif ")" -.SH DESCRIPTION -.I TIFFScanlineSize -returns the size in bytes of a row of data as it would be returned in a call -to -.IR TIFFReadScanline , -or as it would be expected in a call to -.IR TIFFWriteScanline . -.PP -.I TIFFRasterScanlineSize -returns the size in bytes of a complete decoded and packed raster scanline. -Note that this value may be different from the value returned by -.I TIFFScanlineSize -if data is stored as separate planes. -.SH DIAGNOSTICS -None. -.SH "SEE ALSO" -.BR TIFFOpen (3TIFF), -.BR TIFFReadScanline (3TIFF), -.BR libtiff (3TIFF) -.PP -Libtiff library home page: -.BR http://www.remotesensing.org/libtiff/ diff --git a/tiff/man/TIFFstrip.3tiff b/tiff/man/TIFFstrip.3tiff deleted file mode 100755 index bb9658e..0000000 --- a/tiff/man/TIFFstrip.3tiff +++ /dev/null @@ -1,99 +0,0 @@ -.\" $Id: TIFFstrip.3tiff,v 1.2 2005-11-02 11:07:18 dron Exp $ -.\" -.\" Copyright (c) 1992-1997 Sam Leffler -.\" Copyright (c) 1992-1997 Silicon Graphics, Inc. -.\" -.\" Permission to use, copy, modify, distribute, and sell this software and -.\" its documentation for any purpose is hereby granted without fee, provided -.\" that (i) the above copyright notices and this permission notice appear in -.\" all copies of the software and related documentation, and (ii) the names of -.\" Sam Leffler and Silicon Graphics may not be used in any advertising or -.\" publicity relating to the software without the specific, prior written -.\" permission of Sam Leffler and Silicon Graphics. -.\" -.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -.\" -.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -.\" OF THIS SOFTWARE. -.\" -.if n .po 0 -.TH TIFFSTRIP 3TIFF "October 15, 1995" "libtiff" -.SH NAME -TIFFDefaultStripSize, TIFFStripSize, TIFFVStripSize, TIFFRawStripSize, -TIFFComputeStrip, TIFFNumberOfStrips \- strip-related utility routines -.SH SYNOPSIS -.B "#include <tiffio.h>" -.sp -.BI "uint32 TIFFDefaultStripSize(TIFF *" tif ", uint32 " estimate ")" -.br -.BI "tsize_t TIFFStripSize(TIFF *" tif ")" -.br -.BI "tsize_t TIFFVStripSize(TIFF *" tif ", uint32 " nrows ")" -.br -.BI "tsize_t TIFFRawStripSize(TIFF *" tif ", tstrip_t " strip ")" -.br -.BI "tstrip_t TIFFComputeStrip(TIFF *" tif ", uint32 " row ", tsample_t " sample ")" -.br -.BI "tstrip_t TIFFNumberOfStrips(TIFF *" tif ")" -.SH DESCRIPTION -.I TIFFDefaultStripSize -returns the number of rows for a reasonable-sized strip according to the -current settings of the -.IR ImageWidth , -.IR BitsPerSample , -.IR SamplesPerPixel , -tags and any compression-specific requirements. If the -.I estimate -parameter, if non-zero, then it is taken as an estimate of the desired strip -size and adjusted according to any compression-specific requirements. The -value returned by this function is typically used to define the -.I RowsPerStrip -tag. In lieu of any unusual requirements -.I TIFFDefaultStripSize -tries to create strips that have approximately -8 kilobytes of uncompressed data. -.PP -.IR TIFFStripSize -returns the equivalent size for a strip of data as it would be returned in a -call to -.IR TIFFReadEncodedStrip -or as it would be expected in a call to -.IR TIFFWriteEncodedStrip . -.PP -.I TIFFVStripSize -returns the number of bytes in a strip with -.I nrows -rows of data. -.PP -.I TIFFRawStripSize -returns the number of bytes in a raw strip (i.e. not decoded). -.PP -.IR TIFFComputeStrip -returns the strip that contains the specified coordinates. A valid strip is -always returned; out-of-range coordinate values are clamped to the bounds of -the image. The -.I row -parameter is always used in calculating a strip. The -.I sample -parameter is used only if data are organized in separate planes (\c -.IR PlanarConfiguration =2). -.PP -.IR TIFFNumberOfStrips -returns the number of strips in the image. -.SH DIAGNOSTICS -None. -.SH "SEE ALSO" -.BR TIFFReadEncodedStrip (3TIFF), -.BR TIFFReadRawStrip (3TIFF), -.BR TIFFWriteEncodedStrip (3TIFF), -.BR TIFFWriteRawStrip (3TIFF), -.BR libtiff (3TIFF), -.PP -Libtiff library home page: -.BR http://www.remotesensing.org/libtiff/ diff --git a/tiff/man/TIFFswab.3tiff b/tiff/man/TIFFswab.3tiff deleted file mode 100755 index d6432fa..0000000 --- a/tiff/man/TIFFswab.3tiff +++ /dev/null @@ -1,80 +0,0 @@ -.\" $Id: TIFFswab.3tiff,v 1.2 2005-11-02 11:07:18 dron Exp $ -.\" -.\" Copyright (c) 1988-1997 Sam Leffler -.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. -.\" -.\" Permission to use, copy, modify, distribute, and sell this software and -.\" its documentation for any purpose is hereby granted without fee, provided -.\" that (i) the above copyright notices and this permission notice appear in -.\" all copies of the software and related documentation, and (ii) the names of -.\" Sam Leffler and Silicon Graphics may not be used in any advertising or -.\" publicity relating to the software without the specific, prior written -.\" permission of Sam Leffler and Silicon Graphics. -.\" -.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -.\" -.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -.\" OF THIS SOFTWARE. -.\" -.if n .po 0 -.TH SWAB 3TIFF "November 04, 2004" "libtiff" -.SH NAME -TIFFGetBitRevTable, TIFFReverseBits, TIFFSwabShort, TIFFSwabLong, -TIFFSwabArrayOfShort, TIFFSwabArrayOfLong \- byte- and bit-swapping routines -.SH SYNOPSIS -.B "#include <tiffio.h>" -.sp -.BI "const unsigned char* TIFFGetBitRevTable(int " reversed ")" -.br -.BI "void TIFFReverseBits(u_char *" data ", unsigned long " nbytes ")" -.br -.BI "void TIFFSwabShort(uint16 *" data ")" -.br -.BI "void TIFFSwabLong(uint32 *" data ")" -.br -.BI "void TIFFSwabArrayOfShort(uint16 *" data ", unsigned long " nshorts ")" -.br -.BI "void TIFFSwabArrayOfLong(uint32 *" data ", unsigned long " nlongs ")" -.SH DESCRIPTION -The following routines are used by the library to swap -16- and 32-bit data and to reverse the order of bits in bytes. -.PP -.IR TIFFSwabShort -and -.IR TIFFSwabLong -swap the bytes in a single 16-bit and 32-bit item, respectively. -.IR TIFFSwabArrayOfShort -and -.IR TIFFSwabArrayOfLong -swap the bytes in an array of 16-bit and 32-bit items, respectively. -.PP -.IR TIFFReverseBits -replaces each byte in -.I data -with the equivalent bit-reversed value. This operation is performed with a -lookup table, which is returned using the -.IR TIFFGetBitRevTable -function. -.I reversed -parameter specifies which table should be returned. Supply -.I 1 -if you want bit reversal table. Supply -.I 0 -to get the table that do not reverse bit values. It is a lookup table that can -be used as an -.IR "identity function" ; -i.e. -.IR "TIFFNoBitRevTable[n] == n" . -.SH DIAGNOSTICS -None. -.SH "SEE ALSO" -.BR libtiff (3TIFF) -.PP -Libtiff library home page: -.BR http://www.remotesensing.org/libtiff/ diff --git a/tiff/man/TIFFtile.3tiff b/tiff/man/TIFFtile.3tiff deleted file mode 100755 index 5431f31..0000000 --- a/tiff/man/TIFFtile.3tiff +++ /dev/null @@ -1,131 +0,0 @@ -.\" $Id: TIFFtile.3tiff,v 1.2 2005-11-02 11:07:19 dron Exp $ -.\" -.\" Copyright (c) 1988-1997 Sam Leffler -.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. -.\" -.\" Permission to use, copy, modify, distribute, and sell this software and -.\" its documentation for any purpose is hereby granted without fee, provided -.\" that (i) the above copyright notices and this permission notice appear in -.\" all copies of the software and related documentation, and (ii) the names of -.\" Sam Leffler and Silicon Graphics may not be used in any advertising or -.\" publicity relating to the software without the specific, prior written -.\" permission of Sam Leffler and Silicon Graphics. -.\" -.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -.\" -.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -.\" OF THIS SOFTWARE. -.\" -.if n .po 0 -.TH TIFFTILE 3TIFF "February 14, 1992" "libtiff" -.SH NAME -TIFFTileSize, TIFFTileRowSize, TIFFVTileSize, TIFFDefaultTileSize, -TIFFComputeTile, TIFFCheckTile, TIFFNumberOfTiles \- tile-related utility -routines -.SH SYNOPSIS -.B "#include <tiffio.h>" -.sp -.BI "void TIFFDefaultTileSize(TIFF *" tif ", uint32 *" tw ", uint32 *" th ")" -.br -.BI "tsize_t TIFFTileSize(TIFF *" tif ")" -.br -.BI "tsize_t TIFFTileRowSize(TIFF *" tif ")" -.br -.BI "tsize_t TIFFVTileSize(TIFF *" tif ", uint32 " nrows ")" -.br -.BI "ttile_t TIFFComputeTile(TIFF *" tif ", uint32 " x ", uint32 " y ", uint32 " z ", tsample_t " sample ")" -.br -.BI "int TIFFCheckTile(TIFF *" tif ", uint32 " x ", uint32 " y ", uint32 " z ", tsample_t " sample ")" -.br -.BI "ttile_t TIFFNumberOfTiles(TIFF *" tif ")" -.br -.SH DESCRIPTION -.I TIFFDefaultTileSize -returns the pixel width and height of a reasonable-sized tile; suitable for -setting up the -.I TileWidth -and -.I TileLength -tags. -If the -.I tw -and -.I th -values passed in are non-zero, then they are adjusted to reflect any -compression-specific requirements. The returned width and height are -constrained to be a multiple of 16 pixels to conform with the -.SM TIFF -specification. -.PP -.I TIFFTileSize -returns the equivalent size for a tile of data as it would be returned in a -call to -.I TIFFReadTile -or as it would be expected in a call to -.IR TIFFWriteTile . -.PP -.I TIFFVTileSize -returns the number of bytes in a row-aligned tile with -.I nrows -of data. -.PP -.I TIFFTileRowSize -returns the number of bytes of a row of data in a tile. -.PP -.IR TIFFComputeTile -returns the tile that contains the specified coordinates. A valid tile is -always returned; out-of-range coordinate values are clamped to the bounds of -the image. The -.I x -and -.I y -parameters are always used in calculating a tile. The -.I z -parameter is used if the image is deeper than 1 slice (\c -.IR ImageDepth >1). -The -.I sample -parameter is used only if data are organized in separate planes (\c -.IR PlanarConfiguration =2). -.PP -.IR TIFFCheckTile -returns a non-zero value if the supplied coordinates are within the bounds of -the image and zero otherwise. The -.I x -parameter is checked against the value of the -.I ImageWidth -tag. The -.I y -parameter is checked against the value of the -.I ImageLength -tag. The -.I z -parameter is checked against the value of the -.I ImageDepth -tag (if defined). The -.I sample -parameter is checked against the value of the -.I SamplesPerPixel -parameter if the data are organized in separate planes. -.PP -.IR TIFFNumberOfTiles -returns the number of tiles in the image. -.SH DIAGNOSTICS -None. -.SH "SEE ALSO" -.BR TIFFReadEncodedTile (3TIFF), -.BR TIFFReadRawTile (3TIFF), -.BR TIFFReadTile (3TIFF), -.BR TIFFWriteEncodedTile (3TIFF), -.BR TIFFWriteRawTile (3TIFF), -.BR TIFFWriteTile (3TIFF), -.BR libtiff (3TIFF) -.PP -Libtiff library home page: -.BR http://www.remotesensing.org/libtiff/ diff --git a/tiff/man/bmp2tiff.1 b/tiff/man/bmp2tiff.1 deleted file mode 100755 index f5d68ce..0000000 --- a/tiff/man/bmp2tiff.1 +++ /dev/null @@ -1,85 +0,0 @@ -.\" $Id: bmp2tiff.1,v 1.7 2006-04-20 12:17:19 dron Exp $ -.\" -.\" Copyright (c) 2004, Andrey Kiselev <dron@ak4719.spb.edu> -.\" -.\" Permission to use, copy, modify, distribute, and sell this software and -.\" its documentation for any purpose is hereby granted without fee, provided -.\" that (i) the above copyright notices and this permission notice appear in -.\" all copies of the software and related documentation, and (ii) the names of -.\" Sam Leffler and Silicon Graphics may not be used in any advertising or -.\" publicity relating to the software without the specific, prior written -.\" permission of Sam Leffler and Silicon Graphics. -.\" -.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -.\" -.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -.\" OF THIS SOFTWARE. -.\" -.if n .po 0 -.TH BMP2TIFF 1 "15 October, 2004" "libtiff" -.SH NAME -bmp2tiff \- create a -.SM TIFF -file from a Microsoft Windows Device Independent Bitmap image file -.SH SYNOPSIS -.B bmp2tiff -[ -.I options -] -.I input.bmp -[ -.I input2.bmp ...\& -] -.I output.tiff -.SH DESCRIPTION -.I bmp2tiff -converts a Microsoft Windows Device Independent Bitmap image file to -.SM TIFF. -If several input BMP files are being specified the multipage -.SM TIFF -output file will be created. By default, the -.SM TIFF -image is created with data samples packed (\c -.IR PlanarConfiguration =1), -compressed with the PackBits algorithm (\c -.IR Compression =32773), -and with each strip no more than 8 kilobytes. -These characteristics can overridden, or explicitly specified -with the options described below. -.SH OPTIONS -.TP -.B \-c -Specify a compression scheme to use when writing image data: -.B "\-c none" -for no compression, -.B "\-c packbits" -for the PackBits compression algorithm (the default), -.B "\-c jpeg" -for the baseline JPEG compression algorithm, -.B "\-c zip" -for the Deflate compression algorithm, -and -.B "\-c lzw" -for Lempel-Ziv & Welch. -.TP -.BI \-r " number" -Write data with a specified number of rows per strip; -by default the number of rows/strip is selected so that each strip -is approximately 8 kilobytes. -.SH "SEE ALSO" -.BR gif2tiff (1), -.BR pal2rgb (1), -.BR ppm2tiff (1), -.BR raw2tiff (1), -.BR ras2tiff (1), -.BR sgi2tiff (1), -.BR libtiff (3TIFF) -.PP -Libtiff library home page: -.BR http://www.remotesensing.org/libtiff/ diff --git a/tiff/man/fax2ps.1 b/tiff/man/fax2ps.1 deleted file mode 100755 index 9525f20..0000000 --- a/tiff/man/fax2ps.1 +++ /dev/null @@ -1,159 +0,0 @@ -.\" $Id: fax2ps.1,v 1.4 2006-04-20 12:17:19 dron Exp $ -.\" -.\" Copyright (c) 1991-1997 Sam Leffler -.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. -.\" -.\" Permission to use, copy, modify, distribute, and sell this software and -.\" its documentation for any purpose is hereby granted without fee, provided -.\" that (i) the above copyright notices and this permission notice appear in -.\" all copies of the software and related documentation, and (ii) the names of -.\" Sam Leffler and Silicon Graphics may not be used in any advertising or -.\" publicity relating to the software without the specific, prior written -.\" permission of Sam Leffler and Silicon Graphics. -.\" -.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -.\" -.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -.\" OF THIS SOFTWARE. -.\" -.ds Ps PostScript -.if n .po 0 -.TH FAX2PS 1 "November 2, 2005" "libtiff" -.SH NAME -fax2ps \- convert a -.SM TIFF -facsimile to compressed \*(Ps\(tm -.SH SYNOPSIS -.B fax2ps -[ -.I options -] [ -.I file ...\& -] -.SH DESCRIPTION -.I fax2ps -reads one or more -.SM TIFF -facsimile image files and prints a compressed form of -\*(Ps on the standard output that is suitable for printing. -.PP -By default, each page is scaled to reflect the -image dimensions and resolutions stored in the file. -The -.B \-x -and -.B \-y -options can be used to specify the horizontal and vertical -image resolutions (lines/inch), respectively. -If the -.B \-S -option is specified, each page is scaled to fill an output page. -The default output page is 8.5 by 11 inches. -Alternate page dimensions can be specified in inches with the -.B \-W -and -.B \-H -options. -.PP -By default -.I fax2ps -generates \*(Ps for all pages in the file. -The -.B \-p -option can be used to select one or more pages from -a multi-page document. -.PP -.I fax2ps -generates a compressed form of \*(Ps that is -optimized for sending pages of text to a \*(Ps -printer attached to a host through a low-speed link (such -as a serial line). -Each output page is filled with white and then only -the black areas are drawn. -The \*(Ps specification of the black drawing operations -is optimized by using a special font that encodes the -move-draw operations required to fill -the black regions on the page. -This compression scheme typically results in a substantially -reduced \*(Ps description, relative to the straightforward -imaging of the page with a \*(Ps -.I image -operator. -This algorithm can, however, be ineffective -for continuous-tone and white-on-black images. -For these images, it sometimes is more efficient to send -the raster bitmap image directly; see -.BR tiff2ps (1). -.SH OPTIONS -.TP 10 -.BI \-p " number" -Print only the indicated page. -Multiple pages may be printed by specifying -this option more than once. -.TP 10 -.BI \-x " resolution" -Use -.I resolution -as the horizontal resolution, in dots/inch, of the image data. -By default this value is taken from the file. -.TP 10 -.BI \-y " resolution" -Use -.I resolution -as the vertical resolution, in lines/inch, of the image data. -By default this value is taken from the file. -.TP 10 -.B \-S -Scale each page of image data to fill the output page dimensions. -By default images are presented according to the dimension -information recorded in the -.SM TIFF -file. -.TP 10 -.BI \-W " width" -Use -.I width -as the width, in inches, of the output page. -.TP 10 -.BI \-H " height" -Use -.I height -as the height, in inches, of the output page. -.SH DIAGNOSTICS -Some messages about malformed -.SM TIFF -images come from the -.SM TIFF -library. -.PP -Various messages about badly formatted facsimile images -may be generated due to transmission errors in received -facsimile. -.I fax2ps -attempts to recover from such data errors by resynchronizing -decoding at the end of the current scanline. -This can result in long horizontal black lines in the resultant -\*(Ps image. -.SH NOTES -If the destination printer supports \*(Ps Level II then -it is always faster to just send the encoded bitmap generated -by the -.BR tiff2ps (1) -program. -.SH BUGS -.I fax2ps -should probably figure out when it is doing a poor -job of compressing the output and just generate -\*(Ps to image the bitmap raster instead. -.SH "SEE ALSO" -.BR tiff2ps (1), -.BR libtiff (3) -.PP -Libtiff library home page: -.BR http://www.remotesensing.org/libtiff/ diff --git a/tiff/man/fax2tiff.1 b/tiff/man/fax2tiff.1 deleted file mode 100755 index 873cab1..0000000 --- a/tiff/man/fax2tiff.1 +++ /dev/null @@ -1,286 +0,0 @@ -.\" $Id: fax2tiff.1,v 1.7 2006-04-20 12:17:19 dron Exp $ -.\" -.\" Copyright (c) 1990-1997 Sam Leffler -.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. -.\" -.\" Permission to use, copy, modify, distribute, and sell this software and -.\" its documentation for any purpose is hereby granted without fee, provided -.\" that (i) the above copyright notices and this permission notice appear in -.\" all copies of the software and related documentation, and (ii) the names of -.\" Sam Leffler and Silicon Graphics may not be used in any advertising or -.\" publicity relating to the software without the specific, prior written -.\" permission of Sam Leffler and Silicon Graphics. -.\" -.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -.\" -.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -.\" OF THIS SOFTWARE. -.\" -.if n .po 0 -.TH FAX2TIFF 1 "November 2, 2005" "libtiff" -.SH NAME -fax2tiff \- create a -.SM TIFF -Class F fax file from raw fax data -.SH SYNOPSIS -.B fax2tiff -[ -.I options -] [ -.B \-o -.I output.tif -] -.I input.raw -.SH DESCRIPTION -.I Fax2tiff -creates a -.SM TIFF -file containing -.SM CCITT -Group 3 or Group 4 encoded data from one or more files containing ``raw'' -Group 3 or Group 4 encoded data (typically obtained directly from a fax modem). -By default, each row of data in the resultant -.SM TIFF -file is 1-dimensionally encoded and -padded or truncated to 1728 pixels, as needed. -The resultant image is a set of low resolution (98 lines/inch) -or medium resolution (196 lines/inch) -pages, each of which is a single strip of data. -The generated file conforms to the -.SM TIFF -Class F (\c -.SM FAX\c -) specification for storing facsimile data. -This means, in particular, that each page of the data does -.B not -include the trailing -.I "return to control" -(\c -.SM RTC\c -) code; as required -for transmission by the -.SM CCITT -Group 3 specifications. -The old, ``classic'', format is created if the -.B \-c -option is used. -(The Class F format can also be requested with the -.B \-f -option.) -.PP -The default name of the output image is -.IR fax.tif ; -this can be changed with the -.B \-o -option. -Each input file is assumed to be a separate page of facsimile data -from the same document. -The order in which input files are specified on the command -line is the order in which the resultant pages appear in the -output file. -.SH OPTIONS -Options that affect the interpretation of input data are: -.TP -.B \-3 -Assume input data is -.SM CCITT -Group 3 encoded (default). -.TP -.B \-4 -Assume input data is -.SM CCITT -Group 4 encoded. -.TP -.B \-U -Assume input data is uncompressed (Group 3 or Group 4). -.TP -.B \-1 -Assume input data is encoded with the 1-dimensional version of the -.SM CCITT -Group 3 Huffman encoding algorithm (default). -.TP -.B \-2 -Assume input data is 2-dimensional version of the -.SM CCITT -Group 3 Huffman encoding algorithm. -.TP -.B \-P -Assume input data is -.B not -EOL-aligned (default). This option has effect with Group 3 encoded input only. -.TP -.B \-A -Assume input data is EOL-aligned. This option has effect with Group 3 -encoded input only. -.TP -.B \-M -Treat input data as having bits filled from most significant bit (\c -.SM MSB\c -) to most least bit (\c -.SM LSB\c -). -.TP -.B \-L -Treat input data as having bits filled from least significant bit (\c -.SM LSB\c -) to most significant bit (\c -.SM MSB\c -) (default). -.TP -.B \-B -Assume input data was encoded with black as 0 and white as 1. -.TP -.B \-W -Assume input data was encoded with black as 1 and white as 0 (default). -.TP -.B \-R -Specify the vertical resolution, in lines/inch, of the input images. -By default input are assumed to have a vertical resolution of 196 lines/inch. -If images are low resolution facsimile, a value of 98 lines/inch should -be specified. -.TP -.B \-X -Specify the width, in pixels, of the input images. -By default input are assumed to have a width of 1728 pixels. -.PP -Options that affect the output file format are: -.TP -.B \-o -Specify the name of the output file. -.TP -.B \-7 -Force output to be compressed with the -.SM CCITT -Group 3 Huffman encoding algorithm (default). -.TP -.B \-8 -Force output to be compressed with the -.SM CCITT -Group 4 Huffman encoding. -.TP -.B \-u -Force output to be uncompressed (Group 3 or Group 4). -.TP -.B \-5 -Force output to be encoded with the 1-dimensional version of the -.SM CCITT -Group 3 Huffman encoding algorithm. -.TP -.B \-6 -Force output to be encoded with the 2-dimensional version of the -.SM CCITT -Group 3 Huffman encoding algorithm (default). -.TP -.B \-a -Force the last bit of each -.I "End Of Line" -(\c -.SM EOL\c -) code to land on a byte boundary (default). This ``zero padding'' will -be reflected in the contents of the -.I Group3Options -tag of the resultant -.SM TIFF -file. This option has effect with Group 3 encoded output only. -.TP -.B \-p -Do not EOL-align output. This option has effect with Group 3 encoded -output only. -.TP -.B \-c -Generate "classic" Group 3 TIFF format. -.TP -.B \-f -Generate TIFF Class F (TIFF/F) format (default). -.TP -.B \-m -Force output data to have bits filled from most significant bit (\c -.SM MSB\c -) to most least bit (\c -.SM LSB\c -). -.TP -.B \-l -Force output data to have bits filled from least significant bit (\c -.SM LSB\c -) to most significant bit (\c -.SM MSB\c -) (default). -.TP -.B \-r -Specify the number of rows (scanlines) in each strip of data -written to the output file. -By default (or when value -.B 0 -is specified), -.I tiffcp -attempts to set the rows/strip -that no more than 8 kilobytes of data appear in a strip (with except of G3/G4 -compression schemes). If you specify special value -.B \-1 -it will results in infinite number of the rows per strip. The entire image -will be the one strip in that case. This is default in case of G3/G4 output -compression schemes. -.TP -.B \-s -Stretch the input image vertically by writing each input row of -data twice to the output file. -.TP -.B \-v -Force -.I fax2tiff -to print the number of rows of data it retrieved from the input file. -.TP -.B \-z -Force output to be compressed with the LZW encoding. -.SH DIAGNOSTICS -The following warnings and errors come from the decoding -routines in the library. -.PP -.BR "Warning, %s: Premature EOL at scanline %d (x %d).\en" . -The input data had a row that was shorter than the expected width. -The row is padded with white. -.PP -.BR "%s: Premature EOF at scanline %d (x %d).\en" . -The decoder ran out of data in the middle of a scanline. -The resultant row is padded with white. -.PP -.BR "%s: Bad code word at row %d, x %d\en" . -An invalid Group 3 -.I code -was encountered while decoding the input file. -The row number and horizontal position is given. -The remainder of the input row is discarded, while -the corresponding output row is padded with white. -.PP -.BR "%s: Bad 2D code word at scanline %d.\en" . -An invalid Group 4 or 2D Group 3 -.I code -was encountered while decoding the input file. -The row number and horizontal position is given. -The remainder of the input row is discarded, while -the corresponding output row is padded with white. -.SH BUGS -Input data are assumed to have a a ``top left'' orientation; -it should be possible to override this assumption -from the command line. -.SH "SEE ALSO" -.BR "\s-1CCITT\s+1 Recommendation T.4" -(Standardization of Group 3 Facsimile Apparatus for Document Transmission). -.PP -.BR "The Spirit of TIFF Class F", -an appendix to the TIFF 5.0 specification prepared by Cygnet Technologies. -.PP -.BR tiffinfo (1), -.BR tiffdither (1), -.BR tiffgt (1), -.BR libtiff (3) -.PP -Libtiff library home page: -.BR http://www.remotesensing.org/libtiff/ diff --git a/tiff/man/gif2tiff.1 b/tiff/man/gif2tiff.1 deleted file mode 100755 index 5f01d8d..0000000 --- a/tiff/man/gif2tiff.1 +++ /dev/null @@ -1,81 +0,0 @@ -.\" $Id: gif2tiff.1,v 1.4 2006-04-20 12:17:19 dron Exp $ -.\" -.\" Copyright (c) 1991-1997 Sam Leffler -.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. -.\" -.\" Permission to use, copy, modify, distribute, and sell this software and -.\" its documentation for any purpose is hereby granted without fee, provided -.\" that (i) the above copyright notices and this permission notice appear in -.\" all copies of the software and related documentation, and (ii) the names of -.\" Sam Leffler and Silicon Graphics may not be used in any advertising or -.\" publicity relating to the software without the specific, prior written -.\" permission of Sam Leffler and Silicon Graphics. -.\" -.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -.\" -.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -.\" OF THIS SOFTWARE. -.\" -.if n .po 0 -.TH GIF2TIFF 1 "November 2, 2005" "libtiff" -.SH NAME -gif2tiff \- create a -.SM TIFF -file from a GIF87 format image file -.SH SYNOPSIS -.B gif2tiff -[ -.I options -] -.I input.gif -.I output.tif -.SH DESCRIPTION -.I Gif2tiff -converts a file in the GIF87 format to -.SM TIFF. -The -.SM TIFF -image is created as a palette image, with samples -compressed with the Lempel-Ziv & Welch algorithm (\c -.IR Compression =5). -These characteristics can overridden, or explicitly specified -with the options described below. -.SH OPTIONS -.TP -.B \-c -Specify a compression scheme to use when writing image data: -.B "\-c none" -for no compression, -.B "\-c packbits" -for the PackBits compression algorithm, -.B "\-c zip" -for the Deflate compression algorithm, -and -.B "\-c lzw" -for Lempel-Ziv & Welch (the default). -.TP -.B \-r -Write data with a specified number of rows per strip; -by default the number of rows/strip is selected so that each strip -is approximately 8 kilobytes. -.SH NOTES -The program is based on Paul Haeberli's -.I fromgif -program which, in turn, is based on Marcel J.E. Mol's GIF reader. -.SH BUGS -Should have more options to control output format. -.SH "SEE ALSO" -.BR pal2rgb (1), -.BR tiffinfo (1), -.BR tiffcp (1), -.BR tiffmedian (1), -.BR libtiff (3) -.PP -Libtiff library home page: -.BR http://www.remotesensing.org/libtiff/ diff --git a/tiff/man/libtiff.3tiff b/tiff/man/libtiff.3tiff deleted file mode 100755 index 59895d6..0000000 --- a/tiff/man/libtiff.3tiff +++ /dev/null @@ -1,545 +0,0 @@ -.\" $Id: libtiff.3tiff,v 1.4 2012-07-29 15:45:30 tgl Exp $ -.\" -.\" Copyright (c) 1988-1997 Sam Leffler -.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. -.\" -.\" Permission to use, copy, modify, distribute, and sell this software and -.\" its documentation for any purpose is hereby granted without fee, provided -.\" that (i) the above copyright notices and this permission notice appear in -.\" all copies of the software and related documentation, and (ii) the names of -.\" Sam Leffler and Silicon Graphics may not be used in any advertising or -.\" publicity relating to the software without the specific, prior written -.\" permission of Sam Leffler and Silicon Graphics. -.\" -.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -.\" -.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -.\" OF THIS SOFTWARE. -.\" -.if n .po 0 -.TH INTRO 3TIFF "November 2, 2005" "libtiff" -.SH NAME -libtiff \- introduction to -.IR libtiff , -a library for reading and writing -.SM TIFF -files -.SH SYNOPSIS -.B "#include <tiffio.h>" -.sp -cc file.c -.B -ltiff -.SH DESCRIPTION -.I libtiff -is a library for reading and writing data files encoded with the -.I "Tag Image File" -format, Revision 6.0 (or revision 5.0 or revision 4.0). This file format is -suitable for archiving multi-color and monochromatic image data. -.PP -The library supports several compression algorithms, as indicated by the -.I Compression -field, including: -no compression (1), -.SM CCITT -1D Huffman compression (2), -.SM CCITT -Group 3 Facsimile compression (3), -.SM CCITT -Group 4 Facsimile compression (4), -Lempel-Ziv & Welch compression (5), -baseline JPEG compression (7), -word-aligned 1D Huffman compression (32771), -and -PackBits compression (32773). -In addition, several nonstandard compression algorithms are supported: the -4-bit compression algorithm used by the -.I ThunderScan -program (32809) (decompression only), NeXT's 2-bit compression algorithm -(32766) (decompression only), an experimental LZ-style algorithm known as -Deflate (32946), and an experimental CIE LogLuv compression scheme designed -for images with high dynamic range (32845 for LogL and 32845 for LogLuv). -Directory information may be in either little- or big-endian byte order\-byte -swapping is automatically done by the library. Data bit ordering may be either -Most Significant Bit (\c -.SM MSB\c -) to Least Significant Bit (\c -.SM LSB\c -) or -.SM LSB -to -.SM MSB. -Finally, the library does not support files in which the -.IR BitsPerSample , -.IR Compression , -.IR MinSampleValue , -or -.IR MaxSampleValue -fields are defined differently on a per-sample basis -(in Rev. 6.0 the -.I Compression -tag is not defined on a per-sample basis, so this is immaterial). -.SH "DATA TYPES" -The library makes extensive use of C typedefs to promote portability. -Two sets of typedefs are used, one for communication with clients -of the library and one for internal data structures and parsing of the -.SM TIFF -format. -The following typedefs are exposed to users either through function -definitions or through parameters passed through the varargs interfaces. -.in +.5i -.sp 5p -.ta +\w'typedef unsigned <\fIthing\fP> uint32; 'u -.nf -typedef unsigned short uint16; 16-bit unsigned integer -typedef unsigned <\fIthing\fP> uint32; 32-bit unsigned integer -.sp 5p -typedef unsigned int ttag_t; directory tag -typedef uint16 tdir_t; directory index -typedef uint16 tsample_t; sample number -typedef uint32 tstrip_t; strip number -typedef uint32 ttile_t; tile number -typedef int32 tsize_t; i/o size in bytes -typedef void* tdata_t; image data ref -typedef void* thandle_t; client data handle -typedef int32 toff_t; file offset -.fi -.sp 5p -.in -.5i -Note that -.IR tstrip_t , -.IR ttile_t , -and -.I tsize_t -are constrained to be no more than 32-bit quantities by 32-bit fields they are -stored in in the -.SM TIFF -image. -Likewise -.I tsample_t -is limited by the 16-bit field used to store the -.I SamplesPerPixel -tag. -.I tdir_t -constrains the maximum number of -.SM IFDs -that may appear in an image and may be an arbitrary size (w/o penalty). -.I ttag_t -must be either int, unsigned int, pointer, or double because the library uses -a varargs interface and -.SM "ANSI C" -restricts the type of the parameter before an ellipsis to be a promoted type. -.I toff_t -is defined as int32 because TIFF file offsets are (unsigned) 32-bit -quantities. A signed value is used because some interfaces return \-1 on -error. Finally, note that user-specified data references are passed as opaque -handles and only cast at the lowest layers where their type is presumed. -.SH "LIST OF ROUTINES" -The following routines are part of the library. Consult specific manual pages -for details on their operation; on most systems doing ``man function-name'' -will work. -.sp -.nf -.ta \w'TIFFCheckpointDirectory'u+2n -\fIName\fP \fIDescription\fP -.sp 5p -TIFFCheckpointDirectory writes the current state of the directory -TIFFCheckTile very x,y,z,sample is within image -TIFFCIELabToRGBInit initialize CIE L*a*b* 1976 to RGB conversion state -TIFFCIELabToXYZ perform CIE L*a*b* 1976 to CIE XYZ conversion -TIFFClientOpen open a file for reading or writing -TIFFClose close an open file -TIFFComputeStrip return strip containing y,sample -TIFFComputeTile return tile containing x,y,z,sample -TIFFCurrentDirectory return index of current directory -TIFFCurrentRow return index of current scanline -TIFFCurrentStrip return index of current strip -TIFFCurrentTile return index of current tile -TIFFDataWidth return the size of TIFF data types -TIFFError library error handler -TIFFFdOpen open a file for reading or writing -TIFFFieldDataType get data type from field information -TIFFFieldName get field name from field information -TIFFFieldPassCount get whether to pass a value count to Get/SetField -TIFFFieldReadCount get number of values to be read from field -TIFFFieldTag get tag value from field information -TIFFFieldWithName get field information given field name -TIFFFieldWithTag get field information given tag -TIFFFieldWriteCount get number of values to be written to field -TIFFFileName return name of open file -TIFFFileno return open file descriptor -TIFFFindCODEC find standard codec for the specific scheme -TIFFFindField get field information given tag and data type -TIFFFlush flush all pending writes -TIFFFlushData flush pending data writes -TIFFGetBitRevTable return bit reversal table -TIFFGetField return tag value in current directory -TIFFGetFieldDefaulted return tag value in current directory -TIFFGetMode return open file mode -TIFFGetVersion return library version string -TIFFIsCODECConfigured check, whether we have working codec -TIFFIsMSB2LSB return true if image data is being returned - with bit 0 as the most significant bit -TIFFIsTiled return true if image data is tiled -TIFFIsByteSwapped return true if image data is byte-swapped -TIFFNumberOfStrips return number of strips in an image -TIFFNumberOfTiles return number of tiles in an image -TIFFOpen open a file for reading or writing -TIFFPrintDirectory print description of the current directory -TIFFReadBufferSetup specify i/o buffer for reading -TIFFReadDirectory read the next directory -TIFFReadEncodedStrip read and decode a strip of data -TIFFReadEncodedTile read and decode a tile of data -TIFFReadRawStrip read a raw strip of data -TIFFReadRawTile read a raw tile of data -TIFFReadRGBAImage read an image into a fixed format raster -TIFFReadScanline read and decode a row of data -TIFFReadTile read and decode a tile of data -TIFFRegisterCODEC override standard codec for the specific scheme -TIFFReverseBits reverse bits in an array of bytes -TIFFRGBAImageBegin setup decoder state for TIFFRGBAImageGet -TIFFRGBAImageEnd release TIFFRGBAImage decoder state -TIFFRGBAImageGet read and decode an image -TIFFRGBAImageOK is image readable by TIFFRGBAImageGet -TIFFScanlineSize return size of a scanline -TIFFSetDirectory set the current directory -TIFFSetSubDirectory set the current directory -TIFFSetErrorHandler set error handler function -TIFFSetField set a tag's value in the current directory -TIFFSetWarningHandler set warning handler function -TIFFStripSize returns size of a strip -TIFFRawStripSize returns the number of bytes in a raw strip -TIFFSwabShort swap bytes of short -TIFFSwabLong swap bytes of long -TIFFSwabArrayOfShort swap bytes of an array of shorts -TIFFSwabArrayOfLong swap bytes of an array of longs -TIFFTileRowSize return size of a row in a tile -TIFFTileSize return size of a tile -TIFFUnRegisterCODEC unregisters the codec -TIFFVGetField return tag value in current directory -TIFFVGetFieldDefaulted return tag value in current directory -TIFFVSetField set a tag's value in the current directory -TIFFVStripSize returns the number of bytes in a strip -TIFFWarning library warning handler -TIFFWriteDirectory write the current directory -TIFFWriteEncodedStrip compress and write a strip of data -TIFFWriteEncodedTile compress and write a tile of data -TIFFWriteRawStrip write a raw strip of data -TIFFWriteRawTile write a raw tile of data -TIFFWriteScanline write a scanline of data -TIFFWriteTile compress and write a tile of data -TIFFXYZToRGB perform CIE XYZ to RGB conversion -TIFFYCbCrToRGBInit initialize YCbCr to RGB conversion state -TIFFYCbCrtoRGB perform YCbCr to RGB conversion -.sp -Auxiliary functions: -_TIFFfree free memory buffer -_TIFFmalloc dynamically allocate memory buffer -_TIFFmemcmp compare contents of the memory buffers -_TIFFmemcpy copy contents of the one buffer to another -_TIFFmemset fill memory buffer with a constant byte -_TIFFrealloc dynamically reallocate memory buffer - -.fi -.SH "TAG USAGE" -The table below lists the -.SM TIFF -tags that are recognized and handled by the library. -If no use is indicated in the table, then the library -reads and writes the tag, but does not use it internally. -Note that some tags are meaningful only when a particular -compression scheme is being used; e.g. -.I Group3Options -is only useful if -.I Compression -is set to -.SM CCITT -Group 3 encoding. -Tags of this sort are considered -.I codec-specific -tags and the library does not recognize them except when the -.I Compression -tag has been previously set to the relevant compression scheme. -.sp -.nf -.ta \w'TIFFTAG_JPEGTABLESMODE'u+2n +\w'Value'u+2n +\w'R/W'u+2n -\fITag Name\fP \fIValue\fP \fIR/W\fP \fILibrary Use/Notes\fP -.sp 5p -.nf -Artist 315 R/W -BadFaxLines 326 R/W -BitsPerSample 258 R/W lots -CellLength 265 parsed but ignored -CellWidth 264 parsed but ignored -CleanFaxData 327 R/W -ColorMap 320 R/W -ColorResponseUnit 300 parsed but ignored -Compression 259 R/W choosing codec -ConsecutiveBadFaxLines 328 R/W -Copyright 33432 R/W -DataType 32996 R obsoleted by SampleFormat tag -DateTime 306 R/W -DocumentName 269 R/W -DotRange 336 R/W -ExtraSamples 338 R/W lots -FaxRecvParams 34908 R/W -FaxSubAddress 34909 R/W -FaxRecvTime 34910 R/W -FillOrder 266 R/W control bit order -FreeByteCounts 289 parsed but ignored -FreeOffsets 288 parsed but ignored -GrayResponseCurve 291 parsed but ignored -GrayResponseUnit 290 parsed but ignored -Group3Options 292 R/W used by Group 3 codec -Group4Options 293 R/W -HostComputer 316 R/W -ImageDepth 32997 R/W tile/strip calculations -ImageDescription 270 R/W -ImageLength 257 R/W lots -ImageWidth 256 R/W lots -InkNames 333 R/W -InkSet 332 R/W -JPEGTables 347 R/W used by JPEG codec -Make 271 R/W -Matteing 32995 R obsoleted by ExtraSamples tag -MaxSampleValue 281 R/W -MinSampleValue 280 R/W -Model 272 R/W -NewSubFileType 254 R/W called SubFileType in spec -NumberOfInks 334 R/W -Orientation 274 R/W -PageName 285 R/W -PageNumber 297 R/W -PhotometricInterpretation 262 R/W used by Group 3 and JPEG codecs -PlanarConfiguration 284 R/W data i/o -Predictor 317 R/W used by LZW and Deflate codecs -PrimaryChromacities 319 R/W -ReferenceBlackWhite 532 R/W -ResolutionUnit 296 R/W used by Group 3 codec -RowsPerStrip 278 R/W data i/o -SampleFormat 339 R/W -SamplesPerPixel 277 R/W lots -SMinSampleValue 340 R/W -SMaxSampleValue 341 R/W -Software 305 R/W -StoNits 37439 R/W -StripByteCounts 279 R/W data i/o -StripOffsets 273 R/W data i/o -SubFileType 255 R/W called OSubFileType in spec -TargetPrinter 337 R/W -Thresholding 263 R/W -TileByteCounts 324 R/W data i/o -TileDepth 32998 R/W tile/strip calculations -TileLength 323 R/W data i/o -TileOffsets 324 R/W data i/o -TileWidth 322 R/W data i/o -TransferFunction 301 R/W -WhitePoint 318 R/W -XPosition 286 R/W -XResolution 282 R/W -YCbCrCoefficients 529 R/W used by TIFFRGBAImage support -YCbCrPositioning 531 R/W tile/strip size calulcations -YCbCrSubsampling 530 R/W -YPosition 286 R/W -YResolution 283 R/W used by Group 3 codec -.SH "PSEUDO TAGS" -In addition to the normal -.SM TIFF -tags the library supports a collection of -tags whose values lie in a range outside the valid range of -.SM TIFF -tags. -These tags are termed -.I pseud-tags -and are used to control various codec-specific functions within the library. -The table below summarizes the defined pseudo-tags. -.sp -.nf -.ta \w'TIFFTAG_JPEGTABLESMODE'u+2n +\w'Codec'u+2n +\w'R/W'u+2n -\fITag Name\fP \fICodec\fP \fIR/W\fP \fILibrary Use/Notes\fP -.sp 5p -.nf -TIFFTAG_FAXMODE G3 R/W general codec operation -TIFFTAG_FAXFILLFUNC G3/G4 R/W bitmap fill function -TIFFTAG_JPEGQUALITY JPEG R/W compression quality control -TIFFTAG_JPEGCOLORMODE JPEG R/W control colorspace conversions -TIFFTAG_JPEGTABLESMODE JPEG R/W control contents of \fIJPEGTables\fP tag -TIFFTAG_ZIPQUALITY Deflate R/W compression quality level -TIFFTAG_PIXARLOGDATAFMT PixarLog R/W user data format -TIFFTAG_PIXARLOGQUALITY PixarLog R/W compression quality level -TIFFTAG_SGILOGDATAFMT SGILog R/W user data format -.fi -.TP -.B TIFFTAG_FAXMODE -Control the operation of the Group 3 codec. -Possible values (independent bits that can be combined by -or'ing them together) are: -FAXMODE_CLASSIC -(enable old-style format in which the -.SM RTC -is written at the end of the last strip), -FAXMODE_NORTC -(opposite of -FAXMODE_CLASSIC; -also called -FAXMODE_CLASSF), -FAXMODE_NOEOL -(do not write -.SM EOL -codes at the start of each row of data), -FAXMODE_BYTEALIGN -(align each encoded row to an 8-bit boundary), -FAXMODE_WORDALIGN -(align each encoded row to an 16-bit boundary), -The default value is dependent on the compression scheme; this -pseudo-tag is used by the various G3 and G4 codecs to share code. -.TP -.B TIFFTAG_FAXFILLFUNC -Control the function used to convert arrays of black and white -runs to packed bit arrays. -This hook can be used to image decoded scanlines in multi-bit -depth rasters (e.g. for display in colormap mode) -or for other purposes. -The default value is a pointer to a builtin function that images -packed bilevel data. -.TP -.B TIFFTAG_IPTCNEWSPHOTO -Tag contaings image metadata per the IPTC newsphoto spec: Headline, -captioning, credit, etc... Used by most wire services. -.TP -.B TIFFTAG_PHOTOSHOP -Tag contains Photoshop captioning information and metadata. Photoshop -uses in parallel and redundantly alongside IPTCNEWSPHOTO information. -.TP -.B TIFFTAG_JPEGQUALITY -Control the compression quality level used in the baseline algorithm. -Note that quality levels are in the range 0-100 with a default value of 75. -.TP -.B TIFFTAG_JPEGCOLORMODE -Control whether or not conversion is done between -RGB and YCbCr colorspaces. -Possible values are: -JPEGCOLORMODE_RAW -(do not convert), and -JPEGCOLORMODE_RGB -(convert to/from RGB) -The default value is JPEGCOLORMODE_RAW. -.TP -.B TIFFTAG_JPEGTABLESMODE -Control the information written in the -.I JPEGTables -tag. -Possible values (independent bits that can be combined by -or'ing them together) are: -JPEGTABLESMODE_QUANT -(include quantization tables), -and -JPEGTABLESMODE_HUFF -(include Huffman encoding tables). -The default value is JPEGTABLESMODE_QUANT|JPEGTABLESMODE_HUFF. -.TP -.B TIFFTAG_ZIPQUALITY -Control the compression technique used by the Deflate codec. -Quality levels are in the range 1-9 with larger numbers yielding better -compression at the cost of more computation. -The default quality level is 6 which yields a good time-space tradeoff. -.TP -.B TIFFTAG_PIXARLOGDATAFMT -Control the format of user data passed -.I in -to the PixarLog codec when encoding and passed -.I out -from when decoding. -Possible values are: -PIXARLOGDATAFMT_8BIT -for 8-bit unsigned pixels, -PIXARLOGDATAFMT_8BITABGR -for 8-bit unsigned ABGR-ordered pixels, -PIXARLOGDATAFMT_11BITLOG -for 11-bit log-encoded raw data, -PIXARLOGDATAFMT_12BITPICIO -for 12-bit PICIO-compatible data, -PIXARLOGDATAFMT_16BIT -for 16-bit signed samples, -and -PIXARLOGDATAFMT_FLOAT -for 32-bit IEEE floating point samples. -.TP -.B TIFFTAG_PIXARLOGQUALITY -Control the compression technique used by the PixarLog codec. -This value is treated identically to TIFFTAG_ZIPQUALITY; see the -above description. -.TP -.B TIFFTAG_SGILOGDATAFMT -Control the format of client data passed -.I in -to the SGILog codec when encoding and passed -.I out -from when decoding. -Possible values are: -SGILOGDATAFMT_FLTXYZ -for converting between LogLuv and 32-bit IEEE floating valued XYZ pixels, -SGILOGDATAFMT_16BITLUV -for 16-bit encoded Luv pixels, -SGILOGDATAFMT_32BITRAW and SGILOGDATAFMT_24BITRAW -for no conversion of data, -SGILOGDATAFMT_8BITRGB -for returning 8-bit RGB data (valid only when decoding LogLuv-encoded data), -SGILOGDATAFMT_FLTY -for converting between LogL and 32-bit IEEE floating valued Y pixels, -SGILOGDATAFMT_16BITL -for 16-bit encoded L pixels, -and -SGILOGDATAFMT_8BITGRY -for returning 8-bit greyscale data -(valid only when decoding LogL-encoded data). -.SH DIAGNOSTICS -All error messages are directed through the -.IR TIFFError -routine. -By default messages are directed to -.B stderr -in the form: -.IR "module: message\en." -Warning messages are likewise directed through the -.IR TIFFWarning -routine. -.SH "SEE ALSO" -.BR fax2tiff (1), -.BR gif2tiff (1), -.BR pal2rgb (1), -.BR ppm2tiff (1), -.BR rgb2ycbcr (1), -.BR ras2tiff (1), -.BR raw2tiff (1), -.BR sgi2tiff (1), -.BR tiff2bw (1), -.BR tiffdither (1), -.BR tiffdump (1), -.BR tiffcp (1), -.BR tiffcmp (1), -.BR tiffgt (1), -.BR tiffinfo (1), -.BR tiffmedian (1), -.BR tiffsplit (1), -.BR tiffsv (1). -.PP -.BR "Tag Image File Format Specification \(em Revision 6.0" , -an Aldus Technical Memorandum. -.PP -.BR "The Spirit of TIFF Class F" , -an appendix to the TIFF 5.0 specification prepared by Cygnet Technologies. -.PP -Libtiff library home page: -.BR http://www.remotesensing.org/libtiff/ -.SH BUGS -The library does not support multi-sample images -where some samples have different bits/sample. -.PP -The library does not support random access to compressed data -that is organized with more than one row per tile or strip. diff --git a/tiff/man/pal2rgb.1 b/tiff/man/pal2rgb.1 deleted file mode 100755 index 0ac2e5a..0000000 --- a/tiff/man/pal2rgb.1 +++ /dev/null @@ -1,111 +0,0 @@ -.\" $Id: pal2rgb.1,v 1.3 2005-11-02 11:07:19 dron Exp $ -.\" -.\" Copyright (c) 1990-1997 Sam Leffler -.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. -.\" -.\" Permission to use, copy, modify, distribute, and sell this software and -.\" its documentation for any purpose is hereby granted without fee, provided -.\" that (i) the above copyright notices and this permission notice appear in -.\" all copies of the software and related documentation, and (ii) the names of -.\" Sam Leffler and Silicon Graphics may not be used in any advertising or -.\" publicity relating to the software without the specific, prior written -.\" permission of Sam Leffler and Silicon Graphics. -.\" -.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -.\" -.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -.\" OF THIS SOFTWARE. -.\" -.if n .po 0 -.TH PAL2RGB 1 "September 20, 2005" "libtiff" -.SH NAME -pal2rgb \- convert a palette color -.SM TIFF -image to a full color image -.SH SYNOPSIS -.B pal2rgb -[ -.I options -] -.I input.tif -.I output.tif -.SH DESCRIPTION -.I Pal2rgb -converts a palette color -.SM TIFF -image to a full color image by -applying the colormap of the palette image to each sample -to generate a full color -.SM RGB -image. -.SH OPTIONS -Options that affect the interpretation of input data are: -.TP -.B \-C -This option overrides the default behavior of -.I pal2rgb -in determining whether or not -colormap entries contain 16-bit or 8-bit values. -By default the colormap is inspected and -if no colormap entry greater than 255 is found, -the colormap is assumed to have only 8-bit values; otherwise -16-bit values (as required by the -.SM TIFF -specification) are assumed. -The -.B \-C -option can be used to explicitly specify the number of -bits for colormap entries: -.B "\-C 8" -for 8-bit values, -.B "\-C 16" -for 16-bit values. -.PP -Options that affect the output file format are: -.TP -.B \-p -Explicitly select the planar configuration used in organizing -data samples in the output image: -.B "\-p contig" -for samples packed contiguously, and -.B "\-p separate" -for samples stored separately. -By default samples are packed. -.TP -.B \-c -Use the specific compression algorithm to encoded image data -in the output file: -.B "\-c packbits" -for Macintosh Packbits, -.B "\-c lzw" -for Lempel-Ziv & Welch, -.B "\-c zip" -for Deflate, -.B "\-c none" -for no compression. -If no compression-related option is specified, the input -file's compression algorithm is used. -.TP -.B \-r -Explicitly specify the number of rows in each strip of the -output file. -If the -.B \-r -option is not specified, a number is selected such that each -output strip has approximately 8 kilobytes of data in it. -.SH BUGS -Only 8-bit images are handled. -.SH "SEE ALSO" -.BR tiffinfo (1), -.BR tiffcp (1), -.BR tiffmedian (1), -.BR libtiff (3) -.PP -Libtiff library home page: -.BR http://www.remotesensing.org/libtiff/ diff --git a/tiff/man/ppm2tiff.1 b/tiff/man/ppm2tiff.1 deleted file mode 100755 index 882fd04..0000000 --- a/tiff/man/ppm2tiff.1 +++ /dev/null @@ -1,105 +0,0 @@ -.\" $Id: ppm2tiff.1,v 1.5 2006-03-01 11:20:33 dron Exp $ -.\" -.\" Copyright (c) 1991-1997 Sam Leffler -.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. -.\" -.\" Permission to use, copy, modify, distribute, and sell this software and -.\" its documentation for any purpose is hereby granted without fee, provided -.\" that (i) the above copyright notices and this permission notice appear in -.\" all copies of the software and related documentation, and (ii) the names of -.\" Sam Leffler and Silicon Graphics may not be used in any advertising or -.\" publicity relating to the software without the specific, prior written -.\" permission of Sam Leffler and Silicon Graphics. -.\" -.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -.\" -.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -.\" OF THIS SOFTWARE. -.\" -.if n .po 0 -.TH PPM2TIFF 1 "March 1, 2006" "libtiff" -.SH NAME -ppm2tiff \- create a -.SM TIFF -file from -.SM PPM, PGM -and -.SM PBM -image files -.SH SYNOPSIS -.B ppm2tiff -[ -.I options -] [ -.I input.ppm -] -.I output.tif -.SH DESCRIPTION -.I ppm2tiff -converts a file in the -.SM PPM, PGM -and -.SM PBM -image formats to -.SM TIFF. -By default, the -.SM TIFF -image is created with data samples packed (\c -.IR PlanarConfiguration =1), -compressed with the Packbits algorithm (\c -.IR Compression =32773), -and with each strip no more than 8 kilobytes. These characteristics can be -overridden, or explicitly specified with the options described below -.PP -If the -.SM PPM -file contains greyscale data, then the -.I PhotometricInterpretation -tag is set to 1 (min-is-black), otherwise it is set to 2 (RGB). -.PP -If no -.SM PPM -file is specified on the command line, -.I ppm2tiff -will read from the standard input. -.SH OPTIONS -.TP -.B \-c -Specify a compression scheme to use when writing image data: -.B none -for no compression, -.B packbits -for PackBits compression (will be used by default), -.B lzw -for Lempel-Ziv & Welch compression, -.B jpeg -for baseline JPEG compression, -.B zip -for Deflate compression, -.B g3 -for CCITT Group 3 (T.4) compression, -and -.B g4 -for CCITT Group 4 (T.6) compression. -.TP -.B \-r -Write data with a specified number of rows per strip; by default the number of -rows/strip is selected so that each strip is approximately 8 kilobytes. -.TP -.B \-R -Mark the resultant image to have the specified X and Y resolution (in -dots/inch). -.SH "SEE ALSO" -.BR tiffinfo (1), -.BR tiffcp (1), -.BR tiffmedian (1), -.BR libtiff (3) -.PP -Libtiff library home page: -.BR http://www.remotesensing.org/libtiff/ diff --git a/tiff/man/ras2tiff.1 b/tiff/man/ras2tiff.1 deleted file mode 100755 index 0c78ddb..0000000 --- a/tiff/man/ras2tiff.1 +++ /dev/null @@ -1,96 +0,0 @@ -.\" $Id: ras2tiff.1,v 1.4 2006-04-20 12:17:19 dron Exp $ -.\" -.\" Copyright (c) 1990-1997 Sam Leffler -.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. -.\" -.\" Permission to use, copy, modify, distribute, and sell this software and -.\" its documentation for any purpose is hereby granted without fee, provided -.\" that (i) the above copyright notices and this permission notice appear in -.\" all copies of the software and related documentation, and (ii) the names of -.\" Sam Leffler and Silicon Graphics may not be used in any advertising or -.\" publicity relating to the software without the specific, prior written -.\" permission of Sam Leffler and Silicon Graphics. -.\" -.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -.\" -.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -.\" OF THIS SOFTWARE. -.\" -.if n .po 0 -.TH RAS2TIFF 1 "November 2, 2005" "libtiff" -.SH NAME -ras2tiff \- create a -.SM TIFF -file from a Sun rasterfile -.SH SYNOPSIS -.B ras2tiff -[ -.I options -] -.I input.ras -.I output.tif -.SH DESCRIPTION -.I ras2tiff -converts a file in the Sun rasterfile format to -.SM TIFF. -By default, the -.SM TIFF -image is created with data samples packed (\c -.IR PlanarConfiguration =1), -compressed with the Lempel-Ziv & Welch algorithm (\c -.IR Compression =5), -and with each strip no more than 8 kilobytes. -These characteristics can overridden, or explicitly specified -with the options described below. -.PP -Any colormap information in the rasterfile is carried over to the -.SM TIFF -file by including a -.I Colormap -tag in the output file. -If the rasterfile has a colormap, the -.I PhotometricInterpretation -tag is set to 3 (palette); -otherwise it is set to 2 (RGB) if the depth -is 24 or 1 (min-is-black) if the depth is not 24. -.SH OPTIONS -.TP -.B \-c -Specify a compression scheme to use when writing image data: -.B "\-c none" -for no compression, -.B "\-c packbits" -for the PackBits compression algorithm, -.B "\-c jpeg" -for the baseline JPEG compression algorithm, -.B "\-c zip -for the Deflate compression algorithm, -and -.B "\-c lzw" -for Lempel-Ziv & Welch (the default). -.TP -.B \-r -Write data with a specified number of rows per strip; -by default the number of rows/strip is selected so that each strip -is approximately 8 kilobytes. -.SH BUGS -Does not handle all possible rasterfiles. -In particular, -.I ras2tiff -does not handle run-length encoded images. -.SH "SEE ALSO" -.BR pal2rgb (1), -.BR tiffinfo (1), -.BR tiffcp (1), -.BR tiffmedian (1), -.BR libtiff (3) -.PP -Libtiff library home page: -.BR http://www.remotesensing.org/libtiff/ - diff --git a/tiff/man/raw2tiff.1 b/tiff/man/raw2tiff.1 deleted file mode 100755 index 3e832df..0000000 --- a/tiff/man/raw2tiff.1 +++ /dev/null @@ -1,196 +0,0 @@ -.\" $Id: raw2tiff.1,v 1.7 2009-08-24 19:13:40 bfriesen Exp $ -.\" -.\" Copyright (c) 1990-1997 Sam Leffler -.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. -.\" -.\" Permission to use, copy, modify, distribute, and sell this software and -.\" its documentation for any purpose is hereby granted without fee, provided -.\" that (i) the above copyright notices and this permission notice appear in -.\" all copies of the software and related documentation, and (ii) the names of -.\" Sam Leffler and Silicon Graphics may not be used in any advertising or -.\" publicity relating to the software without the specific, prior written -.\" permission of Sam Leffler and Silicon Graphics. -.\" -.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -.\" -.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -.\" OF THIS SOFTWARE. -.\" -.if n .po 0 -.TH RAW2TIFF 1 "November 2, 2005" "libtiff" -.SH NAME -raw2tiff \- create a -.SM TIFF -file from a raw data -.SH SYNOPSIS -.B raw2tiff -[ -.I options -] -.I input.raw -.I output.tif -.SH DESCRIPTION -.I raw2tiff -converts a raw byte sequence into -.SM TIFF. -By default, the -.SM TIFF -image is created with data samples packed (\c -.IR PlanarConfiguration =1), -compressed with the PackBits algorithm (\c -.IR Compression =32773), -and with each strip no more than 8 kilobytes. -These characteristics can overridden, or explicitly specified -with the options described below. -.SH OPTIONS -.TP -.BI \-H " number" -size of input image file header in bytes (0 by default). This amount of data -just will be skipped from the start of file while reading. -.TP -.BI \-w " number" -width of input image in pixels (can be guessed, see -.SM -.B "GUESSING THE IMAGE GEOMETRY" -below). -.TP -.BI \-l " number" -length of input image in lines (can be guessed, see -.SM -.B "GUESSING THE IMAGE GEOMETRY" -below). -.TP -.BI \-b " number" -number of bands in input image (1 by default). -.TP -.BI \-d " data_type" -type of samples in input image, where -.I data_type -may be: -.ta \w'\fBdouble \fR'u -.br -.B byte\t -8-bit unsigned integer (default), -.br -.B short\t -16-bit unsigned integer, -.br -.B long\t -32-bit unsigned integer, -.br -.B sbyte\t -8-bit signed integer, -.br -.B sshort\t -16-bit signed integer, -.br -.B slong\t -32-bit signed integer, -.br -.B float\t -32-bit IEEE floating point, -.br -.B double\t -64-bit IEEE floating point. -.TP -.BI \-i " config" -type of samples interleaving in input image, where -.I config -may be: -.ta \w'\fBpixel \fR'u -.br -.B pixel\t -pixel interleaved data (default), -.br -.B band\t -band interleaved data. -.TP -.BI \-p " photo" -photometric interpretation (color space) of the input image, where -.I photo -may be: -.ta \w'\fBminiswhite \fR'u -.br -.B miniswhite\t -white color represented with 0 value, -.br -.B minisblack\t -black color represented with 0 value (default), -.br -.B rgb\t -image has RGB color model, -.br -.B cmyk\t -image has CMYK (separated) color model, -.br -.B ycbcr\t -image has YCbCr color model, -.br -.B cielab\t -image has CIE L*a*b color model, -.br -.B icclab\t -image has ICC L*a*b color model, -.br -.B itulab\t -image has ITU L*a*b color model. -.TP -.B \-s -swap bytes fetched from the input file. -.TP -.B \-L -input data has LSB2MSB bit order (default). -.TP -.B \-M -input data has MSB2LSB bit order. -.TP -.B \-c -Specify a compression scheme to use when writing image data: -.B "\-c none" -for no compression, -.B "\-c packbits" -for the PackBits compression algorithm (the default), -.B "\-c jpeg" -for the baseline JPEG compression algorithm, -.B "\-c zip" -for the Deflate compression algorithm, -and -.B "\-c lzw" -for Lempel-Ziv & Welch. -.TP -.BI \-r " number" -Write data with a specified number of rows per strip; -by default the number of rows/strip is selected so that each strip -is approximately 8 kilobytes. -.SH GUESSING THE IMAGE GEOMETRY -.I raw2tiff -can guess image width and height in case one or both of these parameters are -not specified. If you omit one of those parameters, the complementary one will -be calculated based on the file size (taking into account header size, number -of bands and data type). If you omit both parameters, the statistical approach -will be used. Utility will compute correlation coefficient between two lines -at the image center using several appropriate line sizes and the highest -absolute value of the coefficient will indicate the right line size. That is -why you should be cautious with the very large images, because guessing -process may take a while (depending on your system performance). Of course, the -utility can't guess the header size, number of bands and data type, so it -should be specified manually. If you don't know anything about your image, -just try with the several combinations of those options. -.P -There is no magic, it is just a mathematical statistics, so it can be wrong -in some cases. But for most ordinary images guessing method will work fine. -.SH "SEE ALSO" -.BR pal2rgb (1), -.BR tiffinfo (1), -.BR tiffcp (1), -.BR tiffmedian (1), -.BR libtiff (3) -.PP -Libtiff library home page: -.BR http://www.remotesensing.org/libtiff/ diff --git a/tiff/man/rgb2ycbcr.1 b/tiff/man/rgb2ycbcr.1 deleted file mode 100755 index 01a332c..0000000 --- a/tiff/man/rgb2ycbcr.1 +++ /dev/null @@ -1,99 +0,0 @@ -.\" $Header: /cvs/maptools/cvsroot/libtiff/man/rgb2ycbcr.1,v 1.4 2006-04-20 12:17:19 dron Exp $ -.\" -.\" Copyright (c) 1991-1997 Sam Leffler -.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. -.\" -.\" Permission to use, copy, modify, distribute, and sell this software and -.\" its documentation for any purpose is hereby granted without fee, provided -.\" that (i) the above copyright notices and this permission notice appear in -.\" all copies of the software and related documentation, and (ii) the names of -.\" Sam Leffler and Silicon Graphics may not be used in any advertising or -.\" publicity relating to the software without the specific, prior written -.\" permission of Sam Leffler and Silicon Graphics. -.\" -.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -.\" -.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -.\" OF THIS SOFTWARE. -.\" -.if n .po 0 -.TH RGB2YCBCR 1 "November 2, 2005" "libtiff" -.SH NAME -rgb2ycbcr \- convert non-YCbCr -.SM TIFF -images to a YCbCr -.SM TIFF -image -.SH SYNOPSIS -.B rgb2ycbcr -[ -.I options -] -.I "src1.tif src2.tif ... dst.tif" -.SH DESCRIPTION -.I rgb2ycbcr -converts -.SM RGB -color, greyscale, or bi-level -.SM TIFF -images to YCbCr images by transforming and sampling pixel data. If multiple -files are specified on the command line each source file is converted to a -separate directory in the destination file. -.PP -By default, chrominance samples are created by sampling -2 by 2 blocks of luminance values; this can be changed with the -.B \-h -and -.B \-v -options. -Output data are compressed with the -.SM PackBits -compression scheme, by default; an alternate scheme can be selected with the -.B \-c -option. -By default, output data are compressed in strips with -the number of rows in each strip selected so that the -size of a strip is never more than 8 kilobytes; -the -.B \-r -option can be used to explicitly set the number of -rows per strip. -.SH OPTIONS -.TP -.B \-c -Specify a compression scheme to use when writing image data: -.B "\-c none" -for no compression, -.B "\-c packbits" -for the PackBits compression algorithm (the default), -.B "\-c jpeg" -for the JPEG compression algorithm, -.B "\-c zip" -for the deflate compression algorithm, -and -.B "\-c lzw" -for Lempel-Ziv & Welch. -.TP -.B \-h -Set the horizontal sampling dimension to one of: 1, 2 (default), or 4. -.TP -.B \-r -Write data with a specified number of rows per strip; -by default the number of rows/strip is selected so that each strip -is approximately 8 kilobytes. -.TP -.B \-v -Set the vertical sampling dimension to one of: 1, 2 (default), or 4. -.SH "SEE ALSO" -.BR tiffinfo (1), -.BR tiffcp (1), -.BR libtiff (3) -.PP -Libtiff library home page: -.BR http://www.remotesensing.org/libtiff diff --git a/tiff/man/sgi2tiff.1 b/tiff/man/sgi2tiff.1 deleted file mode 100755 index 650adb3..0000000 --- a/tiff/man/sgi2tiff.1 +++ /dev/null @@ -1,93 +0,0 @@ -.\" $Id: sgi2tiff.1,v 1.4 2006-04-20 12:17:19 dron Exp $ -.\" -.\" Copyright (c) 1991-1997 Sam Leffler -.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. -.\" -.\" Permission to use, copy, modify, distribute, and sell this software and -.\" its documentation for any purpose is hereby granted without fee, provided -.\" that (i) the above copyright notices and this permission notice appear in -.\" all copies of the software and related documentation, and (ii) the names of -.\" Sam Leffler and Silicon Graphics may not be used in any advertising or -.\" publicity relating to the software without the specific, prior written -.\" permission of Sam Leffler and Silicon Graphics. -.\" -.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -.\" -.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -.\" OF THIS SOFTWARE. -.\" -.if n .po 0 -.TH SGI2TIFF 1 "November 2, 2005" "libtiff" -.SH NAME -sgi2tiff \- create a -.SM TIFF -file from an -.SM SGI -image file -.SH SYNOPSIS -.B sgi2tiff -[ -.I options -] -.I input.rgb -.I output.tif -.SH DESCRIPTION -.I sgi2tiff -converts a file in the -.SM SGI -image format to -.SM TIFF. -By default, the -.SM TIFF -image is created with data samples packed (\c -.IR PlanarConfiguration =1), -compressed with the Lempel-Ziv & Welch algorithm (\c -.IR Compression =5), -and with each strip no more than 8 kilobytes. -These characteristics can overridden, or explicitly specified -with the options described below. -.SH OPTIONS -.TP -.B \-c -Specify a compression scheme to use when writing image data: -.B "\-c none" -for no compression, -.B "\-c packbits" -for the PackBits compression algorithm), -.B "\-c jpeg" -for the baseline JPEG compression algorithm, -.B "\-c zip -for the Deflate compression algorithm, -and -.B "\-c lzw" -for Lempel-Ziv & Welch (the default). -.TP -.B \-p -Explicitly select the planar configuration used in organizing -data samples in the output image: -.B "\-p contig" -for samples packed contiguously, and -.B "\-p separate" -for samples stored separately. -By default samples are packed. -.TP -.B \-r -Write data with a specified number of rows per strip; -by default the number of rows/strip is selected so that each strip -is approximately 8 kilobytes. -.SH BUGS -Does not record colormap information. -.SH "SEE ALSO" -.BR tiffinfo (1), -.BR tiffcp (1), -.BR tiffmedian (1), -.BR libtiff (3) -.PP -Libtiff library home page: -.BR http://www.remotesensing.org/libtiff/ diff --git a/tiff/man/thumbnail.1 b/tiff/man/thumbnail.1 deleted file mode 100755 index f4172bb..0000000 --- a/tiff/man/thumbnail.1 +++ /dev/null @@ -1,90 +0,0 @@ -.\" $Id: thumbnail.1,v 1.2 2005-11-02 11:07:19 dron Exp $ -.\" -.\" Copyright (c) 1994-1997 Sam Leffler -.\" Copyright (c) 1994-1997 Silicon Graphics, Inc. -.\" -.\" Permission to use, copy, modify, distribute, and sell this software and -.\" its documentation for any purpose is hereby granted without fee, provided -.\" that (i) the above copyright notices and this permission notice appear in -.\" all copies of the software and related documentation, and (ii) the names of -.\" Sam Leffler and Silicon Graphics may not be used in any advertising or -.\" publicity relating to the software without the specific, prior written -.\" permission of Sam Leffler and Silicon Graphics. -.\" -.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -.\" -.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -.\" OF THIS SOFTWARE. -.\" -.if n .po 0 -.TH THUMBNAIL 1 "November 2, 2005" "libtiff" -.SH NAME -thumbnail \- create a -.SM TIFF -file with thumbnail images -.SH SYNOPSIS -.B thumbnail -[ -.I options -] -.I input.tif -.I output.tif -.SH DESCRIPTION -.I thumbnail -is a program written to show how one might use the -SubIFD tag (#330) to store thumbnail images. -.I thumbnail -copies a -.SM TIFF -Class F facsimile file to the output file -and for each image an 8-bit greyscale -.IR "thumbnail sketch" . -The output file contains the thumbnail image with the associated -full-resolution page linked below with the SubIFD tag. -.PP -By default, thumbnail images are 216 pixels wide by 274 pixels high. -Pixels are calculated by sampling and filtering the input image -with each pixel value passed through a contrast curve. -.SH OPTIONS -.TP -.B \-w -Specify the width of thumbnail images in pixels. -.TP -.B \-h -Specify the height of thumbnail images in pixels. -.TP -.B \-c -Specify a contrast curve to apply in generating the thumbnail images. -By default pixels values are passed through a linear contrast curve -that simply maps the pixel value ranges. -Alternative curves are: -.B exp50 -for a 50% exponential curve, -.B exp60 -for a 60% exponential curve, -.B exp70 -for a 70% exponential curve, -.B exp80 -for a 80% exponential curve, -.B exp90 -for a 90% exponential curve, -.B exp -for a pure exponential curve, -.B linear -for a linear curve. -.SH BUGS -There are no options to control the format of the saved thumbnail images. -.SH "SEE ALSO" -.BR tiffdump (1), -.BR tiffgt (1), -.BR tiffinfo (1), -.BR libtiff (3) -.PP -Libtiff library home page: -.BR http://www.remotesensing.org/libtiff/ diff --git a/tiff/man/tiff2bw.1 b/tiff/man/tiff2bw.1 deleted file mode 100755 index ccbe7e8..0000000 --- a/tiff/man/tiff2bw.1 +++ /dev/null @@ -1,94 +0,0 @@ -.\" $Id: tiff2bw.1,v 1.3 2006-04-20 12:17:19 dron Exp $ -.\" -.\" Copyright (c) 1988-1997 Sam Leffler -.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. -.\" -.\" Permission to use, copy, modify, distribute, and sell this software and -.\" its documentation for any purpose is hereby granted without fee, provided -.\" that (i) the above copyright notices and this permission notice appear in -.\" all copies of the software and related documentation, and (ii) the names of -.\" Sam Leffler and Silicon Graphics may not be used in any advertising or -.\" publicity relating to the software without the specific, prior written -.\" permission of Sam Leffler and Silicon Graphics. -.\" -.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -.\" -.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -.\" OF THIS SOFTWARE. -.\" -.if n .po 0 -.TH TIFF2BW 1 "November 2, 2005" "libtiff" -.SH NAME -tiff2bw \- convert a color -.SM TIFF -image to greyscale -.SH SYNOPSIS -.B tiff2bw -[ -.I options -] -.I input.tif -.I output.tif -.SH DESCRIPTION -.I Tiff2bw -converts an -.SM RGB -or Palette color -.SM TIFF -image to a greyscale image by -combining percentages of the red, green, and blue channels. -By default, output samples are created by taking -28% of the red channel, 59% of the green channel, and 11% of -the blue channel. -To alter these percentages, the -.BR \-R , -.BR \-G , -and -.BR \-B -options may be used. -.SH OPTIONS -.TP -.B \-c -Specify a compression scheme to use when writing image data: -.B "\-c none" -for no compression, -.B "\-c packbits" -for the PackBits compression algorithm, -.B "\-c zip -for the Deflate compression algorithm, -.B "\-c g3 -for the CCITT Group 3 compression algorithm, -.B "\-c g4 -for the CCITT Group 4 compression algorithm, -and -.B "\-c lzw" -for Lempel-Ziv & Welch (the default). -.TP -.B \-r -Write data with a specified number of rows per strip; -by default the number of rows/strip is selected so that each strip -is approximately 8 kilobytes. -.TP -.B \-R -Specify the percentage of the red channel to use (default 28). -.TP -.B \-G -Specify the percentage of the green channel to use (default 59). -.TP -.B \-B -Specify the percentage of the blue channel to use (default 11). -.SH "SEE ALSO" -.BR pal2rgb (1), -.BR tiffinfo (1), -.BR tiffcp (1), -.BR tiffmedian (1), -.BR libtiff (3) -.PP -Libtiff library home page: -.BR http://www.remotesensing.org/libtiff/ diff --git a/tiff/man/tiff2pdf.1 b/tiff/man/tiff2pdf.1 deleted file mode 100755 index ba670cf..0000000 --- a/tiff/man/tiff2pdf.1 +++ /dev/null @@ -1,254 +0,0 @@ -.\" $Id: tiff2pdf.1,v 1.7 2010-12-11 22:47:49 faxguy Exp $ -.\" -.\" Copyright (c) 2003 Ross Finlayson -.\" -.\" Permission to use, copy, modify, distribute, and sell this software and -.\" its documentation for any purpose is hereby granted without fee, provided -.\" that (i) the above copyright notices and this permission notice appear in -.\" all copies of the software and related documentation, and (ii) the name of -.\" Ross Finlayson may not be used in any advertising or -.\" publicity relating to the software without the specific, prior written -.\" permission of Ross Finlayson. -.\" -.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -.\" -.\" IN NO EVENT SHALL ROSS FINLAYSON BE LIABLE FOR -.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -.\" OF THIS SOFTWARE. -.\" -.\" Process this file with -.\" groff -man -Tascii tiff2pdf.1 -.\" -.TH TIFF2PDF 1 "April 20, 2006" "libtiff" -.SH NAME -tiff2pdf \- convert a TIFF image to a PDF document -.SH SYNOPSIS -.B tiff2pdf -[ -.I options -] -.I input.tiff -.SH DESCRIPTION -.I tiff2pdf -opens a TIFF image and writes a PDF document to standard output. -.PP -The program converts one TIFF file to one PDF file, including multiple page -TIFF files, tiled TIFF files, black and white. grayscale, and color TIFF -files that contain data of TIFF photometric interpretations of bilevel, -grayscale, RGB, YCbCr, CMYK separation, and ICC L*a*b* as supported by -.I libtiff -and PDF. -.PP -If you have multiple TIFF files to convert into one PDF file then use -.I tiffcp -or other program to concatenate the files into a multiple page TIFF file. -If the input TIFF file is of huge dimensions (greater than 10000 pixels height -or width) convert the input image to a tiled TIFF if it is not already. -.PP -The standard output is standard output. Set the output file name with the -.BI \-o " output.pdf" -option. -.PP -All black and white files are compressed into a single strip CCITT G4 Fax -compressed PDF, unless tiled, where tiled black and white images are -compressed into tiled CCITT G4 Fax compressed PDF, -.I libtiff -CCITT support is assumed. -.PP -Color and grayscale data can be compressed using either JPEG compression, -ITU-T T.81, or Zip/Deflate LZ77 compression. Set the compression type using -the -.B \-j -or -.B \-z -options. JPEG compression support -requires that -.I libtiff -be configured with JPEG support, and Zip/Deflate compression support requires -that -.I libtiff -be configured with Zip support, in tiffconf.h. Use only one or the other of -.B \-j -and -.B \-z. -.PP -If the input TIFF contains single strip CCITT G4 Fax compressed information, -then that is written to the PDF file without transcoding, unless the options -of no compression and no passthrough are set, -.B \-d -and -.B \-n. -.PP -If the input TIFF contains JPEG or single strip Zip/Deflate compressed -information, and they are configured, then that is written to the PDF file -without transcoding, unless the options of no compression and no passthrough -are set. -.PP -The default page size upon which the TIFF image is placed is determined by -the resolution and extent of the image data. Default values for the TIFF -image resolution can be set using the -.B \-x -and -.B \-y -options. The page size can be set using the -.B \-p -option for paper size, or -.B \-w -and -.B \-l -for paper width and length, then each page of the TIFF image is centered on -its page. The distance unit for default resolution and page width and -length can be set by the -.B \-u -option, the default unit is inch. -.PP -Various items of the output document information can be set with the -.BR \-e , -.BR \-c , -.BR \-a , -.BR \-t , -.BR \-s , -and -.B \-k -options. Setting the argument of the option to "" for these -tags causes the relevant document information field to be not written. Some -of the document information values otherwise get their information from the -input TIFF image, the software, author, document name, and image description. -.PP -The Portable Document Format (PDF) specification is copyrighted by Adobe -Systems, Incorporated. -.SH OPTIONS -.TP -.BI \-o " output-file" -Set the output to go to file. -.I output-file -.TP -.B \-j -Compress with JPEG (requires -.I libjpeg -configured with -.IR libtiff ). -.TP -.B \-z -Compress with Zip/Deflate (requires -.I zlib -configured with -.IR libtiff ). -.TP -.BI \-q " quality" -Set the compression quality, 1-100 for JPEG. -.TP -.B \-n -Do not allow data to be converted without uncompressing, no compressed -data passthrough. -.TP -.BI \-b -Set PDF ``Interpolate'' user preference. -.TP -.B \-d -Do not compress (decompress). -.TP -.B \-i -Invert colors. -.TP -.BI \-p " paper-size" -Set paper size, e.g., -.BR letter , -.BR legal , -.BR A4 . -.TP -.B \-F -Cause the tiff to fill the PDF page. -.TP -.BR \-u " [" i | m ] -Set distance unit, -.B i -for inch, -.B m -for centimeter. -.TP -.BI \-w " width" -Set width in units. -.TP -.BI \-l " length" -Set length in units. -.TP -.BI \-x " xres" -Set x/width resolution default. -.TP -.BI \-y " yres" -Set y/length resolution default. -.TP -.BR \-r " [" d | o ] -Set -.B d -for resolution default for images without resolution, -.B o -for resolution override for all images. -.TP -.BI \-f -Set PDF ``Fit Window'' user preference. -.TP -.BI \-e " YYYYMMDDHHMMSS" -Set document information date, overrides image or current date/time default, -.I YYYYMMDDHHMMSS. -.TP -.BI \-c " creator" -Set document information creator, overrides image software default. -.TP -.BI \-a " author" -Set document information author, overrides image artist default. -.TP -.BI \-t " title" -Set document information title, overrides image document name default. -.TP -.BI \-s " subject" -Set document information subject, overrides image image description default. -.TP -.BI \-k " keywords" -Set document information keywords. -.TP -.B \-h -List usage reminder to stderr and exit. -.SH EXAMPLES -.TP -The following example would generate the file output.pdf from input.tiff. -.RS -.nf -tiff2pdf \-o output.pdf input.tiff -.fi -.RE -.PP -The following example would generate PDF output from input.tiff and write it -to standard output. -.RS -.nf -tiff2pdf input.tiff -.fi -.RE -.PP -The following example would generate the file output.pdf from input.tiff, -putting the image pages on a letter sized page, compressing the output -with JPEG, with JPEG quality 75, setting the title to ``Document'', and setting -the ``Fit Window'' option. -.RS -.nf -tiff2pdf \-p letter \-j \-q 75 \-t "Document" \-f \-o output.pdf input.tiff -.fi -.RE -.SH BUGS -Please report bugs via the web interface at -.IP -\%http://bugzilla.remotesensing.org/enter_bug.cgi?product=libtiff -.SH "SEE ALSO" -.BR libtiff (3), -.BR tiffcp (1), -.BR tiff2ps (1) -.PP -Libtiff library home page: -.BR http://www.remotesensing.org/libtiff/ diff --git a/tiff/man/tiff2ps.1 b/tiff/man/tiff2ps.1 deleted file mode 100755 index 565e3ac..0000000 --- a/tiff/man/tiff2ps.1 +++ /dev/null @@ -1,294 +0,0 @@ -.\" $Id: tiff2ps.1,v 1.11 2013-03-06 03:35:09 tgl Exp $ -.\" -.\" Copyright (c) 1988-1997 Sam Leffler -.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. -.\" -.\" Permission to use, copy, modify, distribute, and sell this software and -.\" its documentation for any purpose is hereby granted without fee, provided -.\" that (i) the above copyright notices and this permission notice appear in -.\" all copies of the software and related documentation, and (ii) the names of -.\" Sam Leffler and Silicon Graphics may not be used in any advertising or -.\" publicity relating to the software without the specific, prior written -.\" permission of Sam Leffler and Silicon Graphics. -.\" -.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -.\" -.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -.\" OF THIS SOFTWARE. -.\" -.ds Ps PostScript -.if n .po 0 -.TH TIFF2PS 1 "November 2, 2005" "libtiff" -.SH NAME -tiff2ps \- convert a -.SM TIFF -image to \*(Ps\*(Tm -.SH SYNOPSIS -.B tiff2ps -[ -.I options -] -.I "input.tif ..." -.SH DESCRIPTION -.I tiff2ps -reads -.SM TIFF -images and writes \*(Ps or Encapsulated \*(Ps (EPS) -on the standard output. -By default, -.I tiff2ps -writes Encapsulated \*(Ps for the first image in the specified -.SM TIFF -image file. -.PP -By default, -.I tiff2ps -will generate \*(Ps that fills a printed area specified -by the -.SM TIFF -tags in the input file. -If the file does not contain -.I XResolution -or -.I YResolution -tags, then the printed area is set according to the image dimensions. -The -.B \-w -and -.B \-h -options (see below) -can be used to set the dimensions of the printed area in inches; -overriding any relevant -.SM TIFF -tags. -.PP -The \*(Ps generated for -.SM RGB, -palette, and -.SM CMYK -images uses the -.I colorimage -operator. -The \*(Ps generated for -greyscale and bilevel images -uses the -.I image -operator. -When the -.I colorimage -operator is used, \*(Ps code to emulate this operator -on older \*(Ps printers is also generated. -Note that this emulation code can be very slow. -.PP -Color images with associated alpha data are composited over -a white background. -.SH OPTIONS -.TP -.B \-1 -Generate \*(Ps Level 1 (the default). -.TP -.B \-2 -Generate \*(Ps Level 2. -.TP -.B \-3 -Generate \*(Ps Level 3. It basically allows one to use the /flateDecode -filter for ZIP compressed TIFF images. -.TP -.B \-8 -Disable use of ASCII85 encoding with \*(Ps Level 2/3. -.TP -.B \-a -Generate output for all IFDs (pages) in the input file. -.TP -.B \-b -Specify the bottom margin for the output (in inches). This does not affect -the height of the printed image. -.TP -.B \-c -Center the image in the output. This option only shows an effect if both -the -.B \-w -and the -.B \-h -option are given. -.TP -.B \-C -Specify the document creator name. -.TP -.B \-d -Set the initial -.SM TIFF -directory to the specified directory number. -(NB: Directories are numbered starting at zero.) -This option is useful for selecting individual pages in a -multi-page (e.g. facsimile) file. -.TP -.B \-D -Enable duplex printing (two pages per sheet of paper). -.TP -.B \-e -Force the generation of Encapsulated \*(Ps (implies -.BR \-z ). -.TP -.B \-h -Specify the vertical size of the printed area (in inches). -.TP -.B \-H -Specify the maximum height of image (in inches). Images with larger sizes will -be split in several pages. Option -.B \-L -may be used for specifying size of split images overlapping. -.B \-i -Enable/disable pixel interpolation. This option requires a -single numeric value: zero to disable pixel interpolation and -non-zero to enable. The default is enabled. -.TP -.B \-L -Specify the size of overlapping for split images (in inches). Used in -conjunction with -.B \-H -and -.B \-W -options. -.TP -.B \-l -Specify the left margin for the output (in inches). This does not affect -the width of the printed image. -.TP -.B \-m -Where possible render using the -.I imagemask -\*(Ps operator instead of the -.I image -operator. When this option is specified -.I tiff2ps -will use -.I imagemask -for rendering 1 bit deep images. If this option is not specified -or if the image depth is greater than 1 then the -.I image -operator is used. -.TP -.B \-o -Set the initial -.SM TIFF -directory to the -.SM IFD -at the specified file offset. -This option is useful for selecting thumbnail images and the -like which are hidden using the -.I SubIFD -tag. -.TP -.B \-O -Write \*(Ps to specified file instead of standard output. -.TP -.B \-p -Force the generation of (non-Encapsulated) \*(Ps. -.TP -.B \-P L|P -Set optional PageOrientation DSC comment to Landscape or Portrait. -.TP -.B \-r 90|180|270|auto -Rotate image by 90, 180, 270 degrees or auto. Auto picks the best -fit for the image on the specified paper size (eg portrait -or landscape) if -h or -w is specified. Rotation is in degrees -counterclockwise. Auto rotates 90 degrees ccw to produce landscape. -.TP -.B \-s -Generate output for a single IFD (page) in the input file. -.TP -.B \-t -Specify the document title string. -.TP -.B \-T -Print pages for top edge binding. -.TP -.B \-w -Specify the horizontal size of the printed area (in inches). -.TP -.B \-W -Specify the maximum width of image (in inches). Images with larger sizes will -be split in several pages. Options -.B \-L -and -.B \-W -are mutually exclusive. -.TP -.B \-x -Override resolution units specified in the TIFF as centimeters. -.TP -.B \-y -Override resolution units specified in the TIFF as inches. -.TP -.B \-z -When generating \*(Ps Level 2, data is scaled so that it does not -image into the -.I deadzone -on a page (the outer margin that the printing device is unable to mark). -This option suppresses this behavior. -When \*(Ps Level 1 is generated, data is imaged to the entire printed -page and this option has no affect. -.SH EXAMPLES -The following generates \*(Ps Level 2 for all pages of a facsimile: -.RS -.nf -tiff2ps \-a2 fax.tif | lpr -.fi -.RE -Note also that if you have version 2.6.1 or newer of Ghostscript then you -can efficiently preview facsimile generated with the above command. -.PP -To generate Encapsulated \*(Ps for a the image at directory 2 -of an image use: -.RS -.nf -tiff2ps \-d 1 foo.tif -.fi -.RE -(Notice that directories are numbered starting at zero.) -.PP -If you have a long image, it may be split in several pages: -.RS -.nf -tiff2ps \-h11 \-w8.5 \-H14 \-L.5 foo.tif > foo.ps -.fi -.RE -The page size is set to 8.5x11 by -.B \-w -and -.B \-h -options. We will accept a small amount of vertical compression, so -.B \-H -set to 14. Any pages between 11 and 14 inches will be fit onto one page. -Pages longer than 14 inches are cut off at 11 and continued on the next -page. The -.B \-L.5 -option says to repeat a half inch on the next page (to improve readability). -.SH BUGS -Because \*(Ps does not support the notion of a colormap, -8-bit palette images produce 24-bit \*(Ps images. -This conversion results in output that is six times -bigger than the original image and which takes a long time -to send to a printer over a serial line. -Matters are even worse for 4-, 2-, and 1-bit palette images. -.PP -Does not handle tiled images when generating \*(Ps Level I output. -.SH "SEE ALSO" -.BR pal2rgb (1), -.BR tiffinfo (1), -.BR tiffcp (1), -.BR tiffgt (1), -.BR tiffmedian (1), -.BR tiff2bw (1), -.BR tiffsv (1), -.BR libtiff (3) -.PP -Libtiff library home page: -.BR http://www.remotesensing.org/libtiff/ diff --git a/tiff/man/tiff2rgba.1 b/tiff/man/tiff2rgba.1 deleted file mode 100755 index c551656..0000000 --- a/tiff/man/tiff2rgba.1 +++ /dev/null @@ -1,97 +0,0 @@ -.\" $Id: tiff2rgba.1,v 1.4 2006-04-20 12:17:19 dron Exp $ -.\" -.\" Copyright (c) 1988-1997 Sam Leffler -.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. -.\" -.\" Permission to use, copy, modify, distribute, and sell this software and -.\" its documentation for any purpose is hereby granted without fee, provided -.\" that (i) the above copyright notices and this permission notice appear in -.\" all copies of the software and related documentation, and (ii) the names of -.\" Sam Leffler and Silicon Graphics may not be used in any advertising or -.\" publicity relating to the software without the specific, prior written -.\" permission of Sam Leffler and Silicon Graphics. -.\" -.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -.\" -.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -.\" OF THIS SOFTWARE. -.\" -.if n .po 0 -.TH TIFF2RGBA 1 "November 2, 2005" "libtiff" -.SH NAME -tiff2rgba \- convert a -.SM TIFF -image to RGBA color space -.SH SYNOPSIS -.B tiff2rgba -[ -.I options -] -.I input.tif -.I output.tif -.SH DESCRIPTION -.I Tiff2rgba -converts a wide variety of TIFF images into an RGBA TIFF image. This -includes the ability to translate different color spaces and photometric -interpretation into RGBA, support for alpha blending, and translation -of many different bit depths into a 32bit RGBA image. -.P -Internally this program is implemented using the -.I TIFFReadRGBAImage() -function, and it suffers any limitations of that image. This includes -limited support for > 8 BitsPerSample images, and flaws with some -esoteric combinations of BitsPerSample, photometric interpretation, -block organization and planar configuration. -.P -The generated images are stripped images with four samples per pixel -(red, green, blue and alpha) or if the -.B \-n -flag is used, three samples -per pixel (red, green, and blue). The resulting images are always planar -configuration contiguous. For this reason, this program is a useful utility -for transform exotic TIFF files into a form ingestible by almost any TIFF -supporting software. -.SH OPTIONS -.TP -.B \-c -Specify a compression scheme to use when writing image data: -.B "\-c none" -for no compression (the default), -.B "\-c packbits" -for the PackBits compression algorithm, -.B "\-c zip" -for the Deflate compression algorithm, -.B "\-c jpeg" -for the JPEG compression algorithm, -and -.B "\-c lzw" -for Lempel-Ziv & Welch. -.TP -.B \-r -Write data with a specified number of rows per strip; -by default the number of rows/strip is selected so that each strip -is approximately 8 kilobytes. -.TP -.B \-b -Process the image one block (strip/tile) at a time instead of by reading -the whole image into memory at once. This may be necessary for very large -images on systems with limited RAM. -.TP -.B \-n -Drop the alpha component from the output file, producing a pure RGB file. -Currently this does not work if the -.B \-b -flag is also in effect. -.SH "SEE ALSO" -.BR tiff2bw (1), -.BR TIFFReadRGBAImage (3t), -.BR libtiff (3) -.PP -Libtiff library home page: -.BR http://www.remotesensing.org/libtiff/ diff --git a/tiff/man/tiffcmp.1 b/tiff/man/tiffcmp.1 deleted file mode 100755 index 961d812..0000000 --- a/tiff/man/tiffcmp.1 +++ /dev/null @@ -1,87 +0,0 @@ -.\" $Id: tiffcmp.1,v 1.6 2009-08-24 19:13:40 bfriesen Exp $ -.\" -.\" Copyright (c) 1988-1997 Sam Leffler -.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. -.\" -.\" Permission to use, copy, modify, distribute, and sell this software and -.\" its documentation for any purpose is hereby granted without fee, provided -.\" that (i) the above copyright notices and this permission notice appear in -.\" all copies of the software and related documentation, and (ii) the names of -.\" Sam Leffler and Silicon Graphics may not be used in any advertising or -.\" publicity relating to the software without the specific, prior written -.\" permission of Sam Leffler and Silicon Graphics. -.\" -.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -.\" -.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -.\" OF THIS SOFTWARE. -.\" -.if n .po 0 -.TH TIFFCMP 1 "November 2, 2005" "libtiff" -.SH NAME -tiffcmp \- compare two -.SM TIFF -files -.SH SYNOPSIS -.B tiffcmp -[ -.I options -] -.I "file1.tif file2.tif" -.SH DESCRIPTION -.I Tiffcmp -compares the tags and data in two files created according -to the Tagged Image File Format, Revision 6.0. -The schemes used for compressing data in each file -are immaterial when data are compared\-data are compared on -a scanline-by-scanline basis after decompression. -Most directory tags are checked; notable exceptions are: -.IR GrayResponseCurve , -.IR ColorResponseCurve , -and -.IR ColorMap -tags. -Data will not be compared if any of the -.IR BitsPerSample , -.IR SamplesPerPixel , -or -.I ImageWidth -values are not equal. -By default, -.I tiffcmp -will terminate if it encounters any difference. -.SH OPTIONS -.TP -.B \-l -List each byte of image data that differs between the files. -.TP -.BI \-z " number" -List specified number of image data bytes that differs between the files. -.TP -.B \-t -Ignore any differences in directory tags. -.SH BUGS -Tags that are not recognized by the library are not -compared; they may also generate spurious diagnostics. -.PP -The image data of tiled files is not compared, since the -.I TIFFReadScanline() -function is used. An error will be reported for tiled files. -.PP -The pixel and/or sample number reported in differences may be off -in some exotic cases. -.SH "SEE ALSO" -.BR pal2rgb (1), -.BR tiffinfo (1), -.BR tiffcp (1), -.BR tiffmedian (1), -.BR libtiff (3TIFF) -.PP -Libtiff library home page: -.BR http://www.remotesensing.org/libtiff/ diff --git a/tiff/man/tiffcp.1 b/tiff/man/tiffcp.1 deleted file mode 100755 index 0ed12dc..0000000 --- a/tiff/man/tiffcp.1 +++ /dev/null @@ -1,317 +0,0 @@ -.\" $Id: tiffcp.1,v 1.13 2013-03-06 03:35:09 tgl Exp $ -.\" -.\" Copyright (c) 1988-1997 Sam Leffler -.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. -.\" -.\" Permission to use, copy, modify, distribute, and sell this software and -.\" its documentation for any purpose is hereby granted without fee, provided -.\" that (i) the above copyright notices and this permission notice appear in -.\" all copies of the software and related documentation, and (ii) the names of -.\" Sam Leffler and Silicon Graphics may not be used in any advertising or -.\" publicity relating to the software without the specific, prior written -.\" permission of Sam Leffler and Silicon Graphics. -.\" -.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -.\" -.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -.\" OF THIS SOFTWARE. -.\" -.if n .po 0 -.TH TIFFCP 1 "February 24, 2007" "libtiff" -.SH NAME -tiffcp \- copy (and possibly convert) a -.SM TIFF -file -.SH SYNOPSIS -.B tiffcp -[ -.I options -] -.I "src1.tif ... srcN.tif dst.tif" -.SH DESCRIPTION -.I tiffcp -combines one or more files created according -to the Tag Image File Format, Revision 6.0 -into a single -.SM TIFF -file. -Because the output file may be compressed using a different -algorithm than the input files, -.I tiffcp -is most often used to convert between different compression -schemes. -.PP -By default, -.I tiffcp -will copy all the understood tags in a -.SM TIFF -directory of an input -file to the associated directory in the output file. -.PP -.I tiffcp -can be used to reorganize the storage characteristics of data -in a file, but it is explicitly intended to not alter or convert -the image data content in any way. -.SH OPTIONS -.TP -.B \-a -Append to an existing output file instead of overwriting it. -.TP -.BI \-b " image" -subtract the following monochrome image from all others -processed. This can be used to remove a noise bias -from a set of images. This bias image is typically an -image of noise the camera saw with its shutter closed. -.TP -.B \-B -Force output to be written with Big-Endian byte order. -This option only has an effect when the output file is created or -overwritten and not when it is appended to. -.TP -.B \-C -Suppress the use of ``strip chopping'' when reading images -that have a single strip/tile of uncompressed data. -.TP -.B \-c -Specify the compression to use for data written to the output file: -.B none -for no compression, -.B packbits -for PackBits compression, -.B lzw -for Lempel-Ziv & Welch compression, -.B zip -for Deflate compression, -.B lzma -for LZMA2 compression, -.B jpeg -for baseline JPEG compression, -.B g3 -for CCITT Group 3 (T.4) compression, -.B g4 -for CCITT Group 4 (T.6) compression, -or -.B sgilog -for SGILOG compression. -By default -.I tiffcp -will compress data according to the value of the -.I Compression -tag found in the source file. -.IP -The -.SM CCITT -Group 3 and Group 4 compression algorithms can only -be used with bilevel data. -.IP -Group 3 compression can be specified together with several -T.4-specific options: -.B 1d -for 1-dimensional encoding, -.B 2d -for 2-dimensional encoding, -and -.B fill -to force each encoded scanline to be zero-filled so that the -terminating EOL code lies on a byte boundary. -Group 3-specific options are specified by appending a ``:''-separated -list to the ``g3'' option; e.g. -.B "\-c g3:2d:fill" -to get 2D-encoded data with byte-aligned EOL codes. -.IP -.SM LZW, Deflate -and -.SM LZMA2 -compression can be specified together with a -.I predictor -value. A predictor value of 2 causes each scanline of the output image to -undergo horizontal differencing before it is encoded; a value of 1 forces each -scanline to be encoded without differencing. A value 3 is for floating point -predictor which you can use if the encoded data are in floating point format. -LZW-specific options are specified by appending a ``:''-separated list to the -``lzw'' option; e.g. -.B "\-c lzw:2" -for -.SM LZW -compression with horizontal differencing. -.IP -.SM Deflate -and -.SM LZMA2 -encoders support various compression levels (or encoder presets) set as -character ``p'' and a preset number. ``p1'' is the fastest one with the worst -compression ratio and ``p9'' is the slowest but with the best possible ratio; -e.g. -.B "\-c zip:3:p9" -for -.SM Deflate -encoding with maximum compression level and floating point predictor. -.TP -.B \-f -Specify the bit fill order to use in writing output data. -By default, -.I tiffcp -will create a new file with the same fill order as the original. -Specifying -.B "\-f lsb2msb" -will force data to be written with the FillOrder tag set to -.SM LSB2MSB, -while -.B "\-f msb2lsb" -will force data to be written with the FillOrder tag set to -.SM MSB2LSB. -.TP -.B \-i -Ignore non-fatal read errors and continue processing of the input file. -.TP -.B \-l -Specify the length of a tile (in pixels). -.I tiffcp -attempts to set the tile dimensions so -that no more than 8 kilobytes of data appear in a tile. -.TP -.B \-L -Force output to be written with Little-Endian byte order. -This option only has an effect when the output file is created or -overwritten and not when it is appended to. -.TP -.B \-M -Suppress the use of memory-mapped files when reading images. -.TP -.BI \-o " offset" -Set initial directory offset. -.TP -.B \-p -Specify the planar configuration to use in writing image data -that has one 8-bit sample per pixel. -By default, -.I tiffcp -will create a new file with the same planar configuration as -the original. -Specifying -.B "\-p contig" -will force data to be written with multi-sample data packed -together, while -.B "\-p separate" -will force samples to be written in separate planes. -.TP -.B \-r -Specify the number of rows (scanlines) in each strip of data -written to the output file. -By default (or when value -.B 0 -is specified), -.I tiffcp -attempts to set the rows/strip -that no more than 8 kilobytes of data appear in a strip. If you specify -special value -.B \-1 -it will results in infinite number of the rows per strip. The entire image -will be the one strip in that case. -.TP -.B \-s -Force the output file to be written with data organized in strips -(rather than tiles). -.TP -.B \-t -Force the output file to be written with data organized in tiles (rather than -strips). options can be used to force the resultant image to be written as -strips or tiles of data, respectively. -.TP -.B \-w -Specify the width of a tile (in pixels). -.I tiffcp -attempts to set the tile dimensions so that no more than 8 kilobytes of data -appear in a tile. -.I tiffcp -attempts to set the tile dimensions so that no more than 8 kilobytes of data -appear in a tile. -.TP -.B \-x -Force the output file to be written with PAGENUMBER value in sequence. -.TP -.B \-8 -Write BigTIFF instead of classic TIFF format. -.TP -.BI \-,= character -substitute -.I character -for `,' in parsing image directory indices -in files. This is necessary if filenames contain commas. -Note that -.B \-,= -with whitespace immediately following will disable -the special meaning of the `,' entirely. See examples. -.SH EXAMPLES -The following concatenates two files and writes the result using -.SM LZW -encoding: -.RS -.nf -tiffcp \-c lzw a.tif b.tif result.tif -.fi -.RE -.PP -To convert a G3 1d-encoded -.SM TIFF -to a single strip of G4-encoded data the following might be used: -.RS -.nf -tiffcp \-c g4 \-r 10000 g3.tif g4.tif -.fi -.RE -(1000 is just a number that is larger than the number of rows in -the source file.) - -To extract a selected set of images from a multi-image TIFF file, the file -name may be immediately followed by a `,' separated list of image directory -indices. The first image is always in directory 0. Thus, to copy the 1st and -3rd images of image file ``album.tif'' to ``result.tif'': -.RS -.nf -tiffcp album.tif,0,2 result.tif -.fi -.RE - -A trailing comma denotes remaining images in sequence. The following command -will copy all image with except the first one: -.RS -.nf -tiffcp album.tif,1, result.tif -.fi -.RE - -Given file ``CCD.tif'' whose first image is a noise bias -followed by images which include that bias, -subtract the noise from all those images following it -(while decompressing) with the command: -.RS -.nf -tiffcp \-c none \-b CCD.tif CCD.tif,1, result.tif -.fi -.RE - -If the file above were named ``CCD,X.tif'', the -.B \-,= -option would -be required to correctly parse this filename with image numbers, -as follows: -.RS -.nf -tiffcp \-c none \-,=% \-b CCD,X.tif CCD,X%1%.tif result.tif -.SH "SEE ALSO" -.BR pal2rgb (1), -.BR tiffinfo (1), -.BR tiffcmp (1), -.BR tiffmedian (1), -.BR tiffsplit (1), -.BR libtiff (3TIFF) -.PP -Libtiff library home page: -.BR http://www.remotesensing.org/libtiff/ diff --git a/tiff/man/tiffcrop.1 b/tiff/man/tiffcrop.1 deleted file mode 100755 index 0423fb2..0000000 --- a/tiff/man/tiffcrop.1 +++ /dev/null @@ -1,571 +0,0 @@ -.\" $Id: tiffcrop.1,v 1.7 2010-12-12 01:45:35 faxguy Exp $ -.\" tiffcrop -- a port of tiffcp.c extended to include extended processing of images -.\" -.\" Original code: -.\" -.\" Copyright (c) 1988-1997 Sam Leffler -.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. -.\" -.\" Permission to use, copy, modify, distribute, and sell this software and -.\" its documentation for any purpose is hereby granted without fee, provided -.\" that (i) the above copyright notices and this permission notice appear in -.\" all copies of the software and related documentation, and (ii) the names of -.\" Sam Leffler and Silicon Graphics may not be used in any advertising or -.\" publicity relating to the software without the specific, prior written -.\" permission of Sam Leffler and Silicon Graphics. -.\" -.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -.\" -.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -.\" OF THIS SOFTWARE. -.\" -.\" Additional code Copyright (c) 2006-2009 Richard Nolde -.\" Lasted Updated 9/2009 -.\" .if n .po 0 -.TH "TIFFCROP" "1" "December, 2008" "libtiff" "" -.SH "NAME" -tiffcrop \- select, copy, crop, convert, extract, and/or process one or more -.SM TIFF -files. -.SH "SYNOPSIS" -.B tiffcrop -[ -.I options -] -.I "src1.tif ... srcN.tif dst.tif" -.SH "DESCRIPTION" -.I Tiffcrop -processes one or more files created according -to the Tag Image File Format, Revision 6.0, specification -into one or more -.SM TIFF -file(s). -.I Tiffcrop -is most often used to extract portions of an image for processing -with bar code recognizer or OCR software when that software cannot -restrict the region of interest to a specific portion of the image -or to improve efficiency when the regions of interest must be rotated. -It can also be used to subdivide all or part of a processed image into -smaller sections and export individual images or sections of images -as separate files or separate images within one or more files derived -from the original input image or images. -.PP -The available functions can be grouped broadly into three classes: -.IP -Those that select individual images or sections of images from the input files. -The options \-N for sequences or lists of individual images in the input files, -\-Z for zones, \-z for regions, \-X and \-Y for fixed sized selections, -\-m for margins, \-U for units, and \-E for edge reference provide a variety of -ways to specify portions of the input image. -.IP -Those that allow the individual images or selections to be exported to one or -more output files in different groupings and control the organization of the -data in the output images. The options \-P for page size grouping, \-S for -subdivision into columns and rows and \-e for export mode options that produce -one or more files from each input image. The options \-r, \-s, \-t, \-w control -strip and tile format and sizes while \-B \-L \-c \-f modify the endian addressing -scheme, the compression options, and the bit fill sequence of images as they -are written. -.IP -Those that perform some action on each image that is selected from the input file. -The options include \-R for rotate, \-I for inversion of the photometric -interpretation and/or data values, and \-F to flip (mirror) the image horizontally -or vertically. -.PP - -Functions are applied to the input image(s) in the following order: -cropping, fixed area extraction, zone and region extraction, -inversion, mirroring, rotation. -.PP -Functions are applied to the output image(s) in the following order: -export mode options for grouping zones, regions, or images into -one or more files, -.I or -row and column divisions with output margins, -.I or -page size divisions with page orientation options. -.PP -Finally, strip, tile, byte order, output resolution, and compression options are -applied to all output images. -.PP -The output file(s) may be organized and compressed using a different -algorithm from the input files. -By default, -.I tiffcrop -will copy all the understood tags in a -.SM TIFF -directory of an input file to the associated directory in the output file. -Options can be used to force the resultant image to be written as strips -or tiles of data, respectively. -.PP -.I Tiffcrop -can be used to reorganize the storage characteristics of data -in a file, and to reorganize, extract, rotate, and otherwise -process the image data as specified at the same time whereas -tiffcp does not alter the image data within the file. -.PP -Using the options for selecting individual input images and the -options for exporting images and/or segments defined as zones or -regions of each input image, -.I tiffcrop -can perform the functions of tiffcp and tiffsplit in a single pass -while applying multiple operations to individual selections or images. -.PP -.SH "OPTIONS" -.TP -.B \-h -Display the syntax summary for tiffcrop. -.TP -.B \-v -Report the current version and last modification date for tiffcrop. -.TP -.B \-N odd|even|#,#\-#,#|last -Specify one or more series or range(s) of images within each file to process. -The words -.B odd -or -.B even -may be used to specify all odd or even numbered images counting from one. -Note that internally, TIFF images are numbered from zero rather than one -but since this convention is not obvious to most users, tiffcrop used 1 -to specifiy the first image in a multipage file. The word -.B last -may be used in place of a number in the sequence to indicate the -final image in the file without knowing how many images there are. -Ranges of images may be specified with a dash and multiple sets -can be indicated by joining them in a comma\-separated list. eg. use -.B \-N 1,5\-7,last -to process the 1st, 5th through 7th, and final image in the file. -.TP -.B \-E top|bottom|left|right -Specify the top, bottom, left, or right edge as the reference from -which to calcuate the width and length of crop regions or sequence -of postions for zones. When used with the \-e option for exporting -zones or regions, the reference edge determines how composite images -are arranged. Using \-E left or right causes successive zones or -regions to be merged horizontally whereas using \-E top or bottom -causes successive zones or regions to be arranged vertically. This -option has no effect on export layout when multiple zones or regions -are not being exported to composite images. Edges may be abbreviated -to the first letter. -.TP -.B \-e combined|divided|image|multiple|separate -Specify the export mode for images and selections from input images. -The final filename on the command line is considered to be the -destination file or filename stem for automatically generated -sequences of files. Modes may be abbreviated to the first letter. -.IP -combined All images and selections are written to a single file with -multiple selections from one image combined into a single image (default) -.IP -divided All images and selections are written to a single file -with each selection from one image written to a new image -.IP -image Each input image is written to a new file (numeric filename sequence) -with multiple selections from the image combined into one image -.IP -multiple Each input image is written to a new file (numeric filename sequence) -with each selection from the image written to a new image -.IP -separate Individual selections from each image are written to separate files -.TP -.B \-U in|cm|px -Specify the type of units to apply to dimensions for margins and -crop regions for input and output images. Inches or centimeters -are converted to pixels using the resolution unit specified in the -TIFF file (which defaults to inches if not specified in the IFD). -.TP -.B \-m #,#,#,# -Specify margins to be removed from the input image. The order must -be top, left, bottom, right with only commas separating the elements -of the list. Margins are scaled according to the current units and -removed before any other extractions are computed.. -.TP -.B \-X # -Set the horizontal (X\-axis) dimension of a region to extract relative to -the specified origin reference. If the origin is the top or bottom -edge, the X axis value will be assumed to start at the left edge. -.TP -.B \-Y # -Set the vertical (Y\-axis) dimension of a region to extract relative to -the specified origin reference. If the origin is the left or right -edge, the Y axis value will be assumed to start at the top. -.TP -.B \-Z #:#,#:# -Specify zones of the image designated as position X of Y equal sized portions -measured from the reference edge, eg 1:3 would be first third of the -image starting from the reference edge minus any margins specified -for the confining edges. Multiple zones can be specified as a comma -separated list but they must reference the same edge. To extract the -top quarter and the bottom third of an image you would use -.B \-Z 1:4,3:3. -.TP -.B \-z x1,y1,x2,y2: ... :xN,yN,xN+1,yN+1 -Specify a series of coordinates to define regions for processing and exporting. -The coordinates represent the top left and lower right corners of each region -in the current units, eg inch, cm, or pixels. Pixels are counted from one to -width or height and inches or cm are calculated from image resolution data. - -Each colon delimited series of four values represents the horizontal and vertical -offsets from the top and left edges of the image, regardless of the edge specified -with the \-E option. The first and third values represent the horizontal offsets of -the corner points from the left edge while the second and fourth values represent -the vertical offsets from the top edge. -.TP -.B \-F horiz|vert -Flip, ie mirror, the image or extracted region horizontally or vertically. -.TP -.B \-R 90|180|270 -Rotate the image or extracted region 90, 180, or 270 degrees clockwise. -.TP -.B \\-I [black|white|data|both] -Invert color space, eg dark to light for bilevel and grayscale images. -This can be used to modify negative images to positive or to correct -images that have the PHOTOMETRIC_INTERPRETATIN tag set incorrectly. -If the value is black or white, the PHOTOMETRIC_INTERPRETATION tag is set to -MinIsBlack or MinIsWhite, without altering the image data. If the argument -is data or both, the data values of the image are modified. Specifying both -inverts the data and the PHOTOMETRIC_INTERPRETATION tag, whereas using data -inverts the data but not the PHOTOMETRIC_INTERPRETATION tag. -No support for modifying the color space of color images in this release. -.TP -.B \-H # -Set the horizontal resolution of output images to # -expressed in the current units. -.TP -.B \-V # -Set the vertical resolution of the output images to # -expressed in the current units. -.TP -.B \-J # -Set the horizontal margin of an output page size to # -expressed in the current units when sectioning image into columns x rows -subimages using the \-S cols:rows option. -.TP -.B \-K # -Set the vertical margin of an output page size to # -expressed in the current units when sectioning image into columns x rows -submiages using the \-S cols:rows option. -.TP -.B \-O portrait|landscape|auto -Set the output orientation of the pages or sections. -Auto will use the arrangement that requires the fewest pages. -This option is only meaningful in conjunction with the -P -option to format an image to fit on a specific paper size. -.TP -.B \-P page -Format the output images to fit on page size paper. Use -\-P list to show the supported page sizes and dimensions. -You can define a custom page size by entering the width and length of the -page in the current units with the following format #.#x#.#. -.TP -.B \-S cols:rows -Divide each image into cols across and rows down equal sections. -.TP -.B \-B -Force output to be written with Big\-Endian byte order. -This option only has an effect when the output file is created or -overwritten and not when it is appended to. -.TP -.B \-C -Suppress the use of ``strip chopping'' when reading images -that have a single strip/tile of uncompressed data. -.TP -.B \-c -Specify the compression to use for data written to the output file: -.B none -for no compression, -.B packbits -for PackBits compression, -.B lzw -for Lempel\-Ziv & Welch compression, -.B jpeg -for baseline JPEG compression. -.B zip -for Deflate compression, -.B g3 -for CCITT Group 3 (T.4) compression, -and -.B g4 -for CCITT Group 4 (T.6) compression. -By default -.I tiffcrop -will compress data according to the value of the -.I Compression -tag found in the source file. -.IP -The -.SM CCITT -Group 3 and Group 4 compression algorithms can only -be used with bilevel data. -.IP -Group 3 compression can be specified together with several -T.4\-specific options: -.B 1d -for 1\-dimensional encoding, -.B 2d -for 2\-dimensional encoding, -and -.B fill -to force each encoded scanline to be zero\-filled so that the -terminating EOL code lies on a byte boundary. -Group 3\-specific options are specified by appending a ``:''\-separated -list to the ``g3'' option; e.g. -.B "\-c g3:2d:fill" -to get 2D\-encoded data with byte\-aligned EOL codes. -.IP -.SM LZW -compression can be specified together with a -.I predictor -value. -A predictor value of 2 causes -each scanline of the output image to undergo horizontal -differencing before it is encoded; a value -of 1 forces each scanline to be encoded without differencing. -LZW\-specific options are specified by appending a ``:''\-separated -list to the ``lzw'' option; e.g. -.B "\-c lzw:2" -for -.SM LZW -compression with horizontal differencing. -.TP -.B \-f -Specify the bit fill order to use in writing output data. -By default, -.I tiffcrop -will create a new file with the same fill order as the original. -Specifying -.B "\-f lsb2msb" -will force data to be written with the FillOrder tag set to -.SM LSB2MSB, -while -.B "\-f msb2lsb" -will force data to be written with the FillOrder tag set to -.SM MSB2LSB. -.TP -.B \-i -Ignore non\-fatal read errors and continue processing of the input file. -.TP -.B \-l -Specify the length of a tile (in pixels). -.I Tiffcrop -attempts to set the tile dimensions so -that no more than 8 kilobytes of data appear in a tile. -.TP -.B \-L -Force output to be written with Little\-Endian byte order. -This option only has an effect when the output file is created or -overwritten and not when it is appended to. -.TP -.B \-M -Suppress the use of memory\-mapped files when reading images. -.TP -.B \-p -Specify the planar configuration to use in writing image data -that has more than one sample per pixel. -By default, -.I tiffcrop -will create a new file with the same planar configuration as -the original. -Specifying -.B "\-p contig" -will force data to be written with multi\-sample data packed -together, while -.B "\-p separate" -will force samples to be written in separate planes. -.TP -.B \-r -Specify the number of rows (scanlines) in each strip of data -written to the output file. -By default (or when value -.B 0 -is specified), -.I tiffcrop -attempts to set the rows/strip that no more than 8 kilobytes of -data appear in a strip. If you specify the special value -.B \-1 -it will results in infinite number of the rows per strip. The entire image -will be the one strip in that case. -.TP -.B \-s -Force the output file to be written with data organized in strips -(rather than tiles). -.TP -.B \-t -Force the output file to be written with data organized in tiles -(rather than strips). -.TP -.B \-w -Specify the width of a tile (in pixels). -.I tiffcrop -attempts to set the tile dimensions so -that no more than 8 kilobytes of data appear in a tile. -.I tiffcrop -attempts to set the tile dimensions so -that no more than 8 kilobytes of data appear in a tile. -.TP -Debug and dump facility -.B \-D opt1:value1,opt2:value2,opt3:value3:opt4:value4 -Display program progress and/or dump raw data to non\-TIFF files. -Options include the following and must be joined as a comma -separated list. The use of this option is generally limited to -program debugging and development of future options. An equal sign -may be substituted for the colon in option:value pairs. -.IP -debug:N Display limited program progress indicators where larger N -increase the level of detail. -.IP -format:txt|raw Format any logged data as ASCII text or raw binary -values. ASCII text dumps include strings of ones and zeroes representing -the binary values in the image data plus identifying headers. -.IP -level:N Specify the level of detail presented in the dump files. -This can vary from dumps of the entire input or output image data to dumps -of data processed by specific functions. Current range of levels is 1 to 3. -.IP -input:full\-path\-to\-directory/input\-dumpname -.IP -output:full\-path\-to\-directory/output\-dumpname -.IP -When dump files are being written, each image will be written to a separate -file with the name built by adding a numeric sequence value to the dumpname -and an extension of .txt for ASCII dumps or .bin for binary dumps. - -The four debug/dump options are independent, though it makes little sense to -specify a dump file without specifying a detail level. -.IP -Note: Tiffcrop may be compiled with -DDEVELMODE to enable additional very - low level debug reporting. -.SH "EXAMPLES" -The following concatenates two files and writes the result using -.SM LZW -encoding: -.RS -.nf -tiffcrop \-c lzw a.tif b.tif result.tif -.fi -.RE -.PP -To convert a G3 1d\-encoded -.SM TIFF -to a single strip of G4\-encoded data the following might be used: -.RS -.nf -tiffcrop \-c g4 \-r 10000 g3.tif g4.tif -.fi -.RE -(1000 is just a number that is larger than the number of rows in -the source file.) - -To extract a selected set of images from a multi\-image TIFF file -use the \-N option described above. Thus, to copy the 1st and 3rd -images of image file "album.tif" to "result.tif": -.RS -.nf -tiffcrop \-N 1,3 album.tif result.tif -.fi -.RE -.PP -Invert a bilevel image scan of a microfilmed document and crop off margins of -0.25 inches on the left and right, 0.5 inch on the top, and 0.75 inch on the -bottom. From the remaining portion of the image, select the second and third -quarters, ie, one half of the area left from the center to each margin. -.RS -tiffcrop \-U in \-m 0.5,0.25,0.75,0.25 \-E left \-Z 2:4,3:4 \-I both MicrofilmNegative.tif MicrofilmPostiveCenter.tif -.fi -.RE -.PP -Extract only the final image of a large Architectural E sized -multipage TIFF file and rotate it 90 degrees clockwise while -reformatting the output to fit on tabloid sized sheets with one -quarter of an inch on each side: -.RS -tiffcrop \-N last \-R 90 \-O auto \-P tabloid \-U in \-J 0.25 \-K 0.25 \-H 300 \-V 300 Big\-PlatMap.tif BigPlatMap\-Tabloid.tif -.fi -.RE -The output images will have a specified resolution of 300 dpi in both -directions. The orientation of each page will be determined by whichever -choice requires the fewest pages. To specify a specific orientation, use -the portrait or landscape option. The paper size option does not resample -the image. It breaks each original image into a series of smaller images -that will fit on the target paper size at the specified resolution. -.fi -.RE -.PP -Extract two regions 2048 pixels wide by 2048 pixels high from each page of -a multi\-page input file and write each region to a separate output file. -.RS -tiffcrop \-U px \-z 1,1,2048,2048:1,2049,2048,4097 \-e separate CheckScans.tiff Check -.fi -.RE -The output file names will use the stem Check with a numeric suffix which is -incremented for each region of each image, eg Check\-001.tiff, Check\-002.tiff ... -Check\-NNN.tiff. To produce a unique file for each page of the input image -with one new image for each region of the input image on that page, change -the export option to \-e multiple. - -.SH "NOTES" -.PP -In general, bilevel, grayscale, palette and RGB(A) data with bit depths -from 1 to 32 bits should work in both interleaved and separate plane -formats. Unlike tiffcp, tiffcrop can read and write tiled images with -bits per sample that are not a multiple of 8 in both interleaved and -separate planar format. Floating point data types are supported at -bit depts of 16, 24, 32 and 64 bits per sample. -.PP -Not all images can be converted from one compression scheme to another. -Data with some photometric interpretations and/or bit depths are tied to -specific compression schemes and vice-versa, e.g. Group 3/4 compression -is only usable for bilevel data. JPEG compression is only usable on 8 -bit per sample data (or 12 bit if -.I LibTIFF -was compiled with 12 bit JPEG support). Support for OJPEG compressed -images is problematic at best. Since OJPEG compression is no longer -supported for writing images with LibTIFF, these images will be updated -to the newer JPEG compression when they are copied or processed. This -may cause the image to appear color shifted or distorted after conversion. -In some cases, it is possible to remove the original compression from -image data using the option -cnone. -.PP -Tiffcrop does not currently provide options to up or downsample data to -different bit depths or convert data from one photometric interpretation -to another, e.g. 16 bits per sample to 8 bits per sample or RGB to grayscale. -.PP -Tiffcrop is very loosely derived from code in -.I tiffcp -with extensive modifications and additions to support the selection of input -images and regions and the exporting of them to one or more output files in -various groupings. The image manipulation routines are entirely new and -additional ones may be added in the future. It will handle tiled images with -bit depths that are not a multiple of eight that tiffcp may refuse to read. -.PP -.I Tiffcrop -was designed to handle large files containing many moderate sized images -with memory usage that is independent of the number of images in the file. -In order to support compression modes that are not based on individual -scanlines, e.g. JPEG, it now reads images by strip or tile rather than by -indvidual scanlines. In addition to the memory required by the input and -output buffers associated with -.I LibTIFF -one or more buffers at least as large as the largest image to be read are -required. The design favors large volume document processing uses over -scientific or graphical manipulation of large datasets as might be found -in research or remote sensing scenarios. -.SH "SEE ALSO" -.BR pal2rgb (1), -.BR tiffinfo (1), -.BR tiffcmp (1), -.BR tiffcp (1), -.BR tiffmedian (1), -.BR tiffsplit (1), -.BR libtiff (3TIFF) -.PP -Libtiff library home page: -.BR http://www.remotesensing.org/libtiff/ - diff --git a/tiff/man/tiffdither.1 b/tiff/man/tiffdither.1 deleted file mode 100755 index c313fd6..0000000 --- a/tiff/man/tiffdither.1 +++ /dev/null @@ -1,135 +0,0 @@ -.\" $Id: tiffdither.1,v 1.5 2013-03-06 03:35:09 tgl Exp $ -.\" -.\" Copyright (c) 1990-1997 Sam Leffler -.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. -.\" -.\" Permission to use, copy, modify, distribute, and sell this software and -.\" its documentation for any purpose is hereby granted without fee, provided -.\" that (i) the above copyright notices and this permission notice appear in -.\" all copies of the software and related documentation, and (ii) the names of -.\" Sam Leffler and Silicon Graphics may not be used in any advertising or -.\" publicity relating to the software without the specific, prior written -.\" permission of Sam Leffler and Silicon Graphics. -.\" -.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -.\" -.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -.\" OF THIS SOFTWARE. -.\" -.if n .po 0 -.TH TIFFDITHER 1 "September 20, 2005" "libtiff" -.SH NAME -tiffdither \- convert a greyscale image to bilevel using dithering -.SH SYNOPSIS -.B tiffdither -[ -.I options -] -.I input.tif -.I output.tif -.SH DESCRIPTION -.I tiffdither -converts a single channel 8-bit greyscale image to a bilevel image -using Floyd-Steinberg error propagation with thresholding. -.SH OPTIONS -.TP -.B \-c -Specify the compression to use for data written to the output file: -.B none -for no compression, -.B packbits -for PackBits compression, -.B lzw -for Lempel-Ziv & Welch compression, -.B zip -for Deflate compression, -.B g3 -for CCITT Group 3 (T.4) compression, -and -.B g4 -for CCITT Group 4 (T.6) compression. -By default -.I tiffdither -will compress data according to the value of the -.I Compression -tag found in the source file. -.IP -The -.SM CCITT -Group 3 and Group 4 compression algorithms can only -be used with bilevel data. -.IP -Group 3 compression can be specified together with several -T.4-specific options: -.B 1d -for 1-dimensional encoding, -.B 2d -for 2-dimensional encoding, -and -.B fill -to force each encoded scanline to be zero-filled so that the -terminating EOL code lies on a byte boundary. -Group 3-specific options are specified by appending a ``:''-separated -list to the ``g3'' option; e.g. -.B "\-c g3:2d:fill" -to get 2D-encoded data with byte-aligned EOL codes. -.IP -.SM LZW -compression can be specified together with a -.I predictor -value. -A predictor value of 2 causes -each scanline of the output image to undergo horizontal -differencing before it is encoded; a value -of 1 forces each scanline to be encoded without differencing. -LZW-specific options are specified by appending a ``:''-separated -list to the ``lzw'' option; e.g. -.B "\-c lzw:2" -for -.SM LZW -compression with horizontal differencing. -.TP -.B \-f -Specify the bit fill order to use in writing output data. -By default, -.I tiffdither -will create a new file with the same fill order as the original. -Specifying -.B "\-f lsb2msb" -will force data to be written with the -.I Fill\%Order -tag set to -.SM LSB2MSB , -while -.B "\-f msb2lsb" -will force data to be written with the -.I Fill\%Order -tag set to -.SM MSB2LSB . -.TP -.B \-r -Make each strip have no more than the given number of rows. -.TP -.B \-t -Set the threshold value for dithering. -By default the threshold value is 128. -.SH NOTES -The dither algorithm is taken from the -.BR tiffmedian (1) -program (written by Paul Heckbert). -.SH "SEE ALSO" -.BR pal2rgb (1), -.BR fax2tiff (1), -.BR tiffinfo (1), -.BR tiffcp (1), -.BR tiff2bw (1), -.BR libtiff (3TIFF) -.PP -Libtiff library home page: -.BR http://www.remotesensing.org/libtiff/ diff --git a/tiff/man/tiffdump.1 b/tiff/man/tiffdump.1 deleted file mode 100755 index 076f9ff..0000000 --- a/tiff/man/tiffdump.1 +++ /dev/null @@ -1,81 +0,0 @@ -.\" $Id: tiffdump.1,v 1.5 2006-04-20 12:17:19 dron Exp $ -.\" -.\" Copyright (c) 1988-1997 Sam Leffler -.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. -.\" -.\" Permission to use, copy, modify, distribute, and sell this software and -.\" its documentation for any purpose is hereby granted without fee, provided -.\" that (i) the above copyright notices and this permission notice appear in -.\" all copies of the software and related documentation, and (ii) the names of -.\" Sam Leffler and Silicon Graphics may not be used in any advertising or -.\" publicity relating to the software without the specific, prior written -.\" permission of Sam Leffler and Silicon Graphics. -.\" -.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -.\" -.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -.\" OF THIS SOFTWARE. -.\" -.if n .po 0 -.TH TIFFDUMP 1 "October 23, 2005" "libtiff" -.SH NAME -tiffdump \- print verbatim information about -.SM TIFF -files -.SH SYNOPSIS -.B tiffdump -[ -.I options -] -.I "name \&..." -.SH DESCRIPTION -.I tiffdump -displays directory information from files created according -to the Tag Image File Format, Revision 6.0. -The header of each -.SM TIFF -file (magic number, version, and first directory offset) -is displayed, followed by the tag contents of each directory in the file. -For each tag, the name, data type, count, and value(s) is displayed. -When the symbolic name for a tag or data type is known, the symbolic -name is displayed followed by it's numeric (decimal) value. -Tag values are displayed enclosed in ``<>'' characters immediately -preceded by the value of the count field. -For example, an -.I ImageWidth -tag might be displayed as ``ImageWidth (256) SHORT (3) 1<800>''. -.PP -.I tiffdump -is particularly useful for investigating the contents of -.SM TIFF -files that -.I libtiff -does not understand. -.SH OPTIONS -.TP -.B \-h -Force numeric data to be printed in hexadecimal rather than the -default decimal. -.TP -.BI \-m " items" -Change the number of indirect data items that are printed. By default, this -will be 24. -.TP -.BI \-o " offset" -Dump the contents of the -.SM IFD -at the a particular file offset. -The file offset may be specified using the usual C-style syntax; -i.e. a leading ``0x'' for hexadecimal and a leading ``0'' for octal. -.SH "SEE ALSO" -.BR tiffinfo (1), -.BR libtiff (3TIFF) -.PP -Libtiff library home page: -.BR http://www.remotesensing.org/libtiff/ diff --git a/tiff/man/tiffgt.1 b/tiff/man/tiffgt.1 deleted file mode 100755 index 680a49a..0000000 --- a/tiff/man/tiffgt.1 +++ /dev/null @@ -1,245 +0,0 @@ -.\" $Id: tiffgt.1,v 1.4 2006-04-20 12:17:19 dron Exp $ -.\" -.\" Copyright (c) 1988-1997 Sam Leffler -.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. -.\" -.\" Permission to use, copy, modify, distribute, and sell this software and -.\" its documentation for any purpose is hereby granted without fee, provided -.\" that (i) the above copyright notices and this permission notice appear in -.\" all copies of the software and related documentation, and (ii) the names of -.\" Sam Leffler and Silicon Graphics may not be used in any advertising or -.\" publicity relating to the software without the specific, prior written -.\" permission of Sam Leffler and Silicon Graphics. -.\" -.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -.\" -.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -.\" OF THIS SOFTWARE. -.\" -.if n .po 0 -.TH TIFFGT 1 "September 20, 2005" "libtiff" -.SH NAME -tiffgt \- display an image stored in a -.SM TIFF -file (Silicon Graphics version) -.SH SYNOPSIS -.B tiffgt -[ -.I options -] -.I "input.tif ..." -.SH DESCRIPTION -.I tiffgt -displays one or more images stored using the -Tag Image File Format, Revision 6.0. -Each image is placed in a fixed size window that the -user must position on the display (unless configured -otherwise through X defaults). -If the display has fewer than 24 bitplanes, or if the -image does not warrant full color, then -.SM RGB -color values are mapped to the closest values that exist in -the colormap (this is done using the -.I rgbi -routine found in the graphics utility library -.BR \-lgutil .) -.PP -.I tiffgt -correctly handles files with any of the following characteristics: -.sp .5 -.in +0.5i -.ta \w'\fIPhotometricInterpretation\fP 'u -.nf -\fIBitsPerSample\fP 1, 2, 4, 8, 16 -\fISamplesPerPixel\fP 1, 3, 4 (the 4th sample is ignored) -\fIPhotometricInterpretation\fP 0 (min-is-white), 1 (min-is-black), 2 (RGB), 3 (palette), 6 (YCbCr) -\fIPlanarConfiguration\fP 1 (contiguous), 2 (separate) -\fIOrientation\fP 1 (top-left), 4 (bottom-left) -.fi -.in -0.5i -.sp .5 -Data may be organized as strips or tiles and may be -compressed with any of the compression algorithms supported -by the -.IR libtiff (3) -library. -.PP -For palette images (\c -.IR PhotometricInterpretation =3), -.I tiffgt -inspects the colormap values and assumes either 16-bit -or 8-bit values according to the maximum value. -That is, if no colormap entry greater than 255 is found, -.I tiffgt -assumes the colormap has only 8-bit values; otherwise -it assumes 16-bit values. -This inspection is done to handle old images written by -previous (incorrect) versions of -.IR libtiff . -.PP -.I tiffgt -can be used to display multiple images one-at-a-time. -The left mouse button switches the display to the first image in the -.I next -file in the list of files specified on the command line. -The right mouse button switches to the first image in the -.I previous -file in the list. -The middle mouse button causes the first image in the first file -specified on the command line to be displayed. -In addition the following keyboard commands are recognized: -.TP -.B b -Use a -.I PhotometricInterpretation -of MinIsBlack in displaying the current image. -.TP -.B l -Use a -.I FillOrder -of lsb-to-msb in decoding the current image. -.TP -.B m -Use a -.I FillOrder -of msb-to-lsb in decoding the current image. -.TP -.B c -Use a colormap visual to display the current image. -.TP -.B r -Use a true color (24-bit RGB) visual to display the current image. -.TP -.B w -Use a -.I PhotometricInterpretation -of MinIsWhite in displaying the current image. -.TP -.B W -Toggle (enable/disable) display of warning messages from the -.SM TIFF -library when decoding images. -.TP -.B E -Toggle (enable/disable) display of error messages from the -.SM TIFF -library when decoding images. -.TP -.B z -Reset all parameters to their default settings (\c -.IR FillOrder , -.IR PhotometricInterpretation , -handling of warnings and errors). -.TP -.B PageUp -Display the previous image in the current file or the last -image in the previous file. -.TP -.B PageDown -Display the next image in the current file or the first image -in the next file. -.TP -.B Home -Display the first image in the current file. -.TP -.B End -Display the last image in the current file (unimplemented). -.SH OPTIONS -.TP -.B \-c -Force image display in a colormap window. -.TP -.B \-d -Specify an image to display by directory number. -By default the first image in the file is displayed. -Directories are numbered starting at zero. -.TP -.B \-e -Enable reporting of error messages from the -.SM TIFF -library. -By default -.I tiffgt -silently ignores images that cannot be read. -.TP -.B \-f -Force -.I tiffgt -to run as a foreground process. -By default -.I tiffgt -will place itself in the background once it has opened the -requested image file. -.TP -.B \-l -Force the presumed bit ordering to be -.SM LSB -to -.SM MSB. -.TP -.B \-m -Force the presumed bit ordering to be -.SM MSB -to -.SM LSB. -.TP -.B \-o -Specify an image to display by directory offset. -By default the first image in the file is displayed. -Directories offsets may be specified using C-style syntax; -i.e. a leading ``0x'' for hexadecimal and a leading ``0'' for octal. -.TP -.B \-p -Override the value of the -.I PhotometricInterpretation -tag; the parameter may be one of: -.BR miniswhite , -.BR minisblack , -.BR rgb , -.BR palette , -.BR mask , -.BR separated , -.BR ycbcr , -and -.BR cielab . -.TP -.B \-r -Force image display in a full color window. -.TP -.B \-s -Stop on the first read error. -By default all errors in the input data are ignored and -.I tiffgt -does it's best to display as much of an image as possible. -.TP -.B \-w -Enable reporting of warning messages from the -.SM TIFF -library. -By default -.I tiffgt -ignores warning messages generated when reading an image. -.TP -.B \-v -Place information in the title bar describing -what type of window (full color or colormap) is being -used, the name of the input file, and the directory -index of the image (if non-zero). -By default, the window type is not shown in the title bar. -.SH BUGS -Images wider and taller than the display are silently truncated to avoid -crashing old versions of the window manager. -.SH "SEE ALSO" -.BR tiffdump (1), -.BR tiffinfo (1), -.BR tiffcp (1), -.BR libtiff (3TIFF) -.PP -Libtiff library home page: -.BR http://www.remotesensing.org/libtiff/ diff --git a/tiff/man/tiffinfo.1 b/tiff/man/tiffinfo.1 deleted file mode 100755 index 2d57375..0000000 --- a/tiff/man/tiffinfo.1 +++ /dev/null @@ -1,88 +0,0 @@ -.\" $Id: tiffinfo.1,v 1.2 2005-11-02 11:07:19 dron Exp $ -.\" -.\" Copyright (c) 1988-1997 Sam Leffler -.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. -.\" -.\" Permission to use, copy, modify, distribute, and sell this software and -.\" its documentation for any purpose is hereby granted without fee, provided -.\" that (i) the above copyright notices and this permission notice appear in -.\" all copies of the software and related documentation, and (ii) the names of -.\" Sam Leffler and Silicon Graphics may not be used in any advertising or -.\" publicity relating to the software without the specific, prior written -.\" permission of Sam Leffler and Silicon Graphics. -.\" -.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -.\" -.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -.\" OF THIS SOFTWARE. -.\" -.if n .po 0 -.TH TIFFINFO 1 "November 2, 2005" "libtiff" -.SH NAME -tiffinfo \- print information about -.SM TIFF -files -.SH SYNOPSIS -.B tiffinfo -[ -.I options -] -.I "input.tif \&..." -.SH DESCRIPTION -.I Tiffinfo -displays information about files created according -to the Tag Image File Format, Revision 6.0. -By default, the contents of each -.SM TIFF -directory in each file -is displayed, with the value of each tag shown symbolically -(where sensible). -.SH OPTIONS -.TP -.B \-c -Display the colormap and color/gray response curves, if present. -.TP -.B \-D -In addition to displaying the directory tags, -read and decompress all the data in each image (but not display it). -.TP -.B \-d -In addition to displaying the directory tags, -print each byte of decompressed data in hexadecimal. -.TP -.B \-j -Display any \s-2JPEG\s0-related tags that are present. -.TP -.B \-o -Set the initial -.SM TIFF -directory according to the specified file offset. -The file offset may be specified using the usual C-style syntax; -i.e. a leading ``0x'' for hexadecimal and a leading ``0'' for octal. -.TP -.B \-s -Display the offsets and byte counts for each data strip in a directory. -.TP -.B \-z -Enable strip chopping when reading image data. -.TP -.B \-# -Set the initial -.SM TIFF -directory to -.IR # . -.SH "SEE ALSO" -.BR pal2rgb (1), -.BR tiffcp (1), -.BR tiffcmp (1), -.BR tiffmedian (1), -.BR libtiff (3TIFF) -.PP -Libtiff library home page: -.BR http://www.remotesensing.org/libtiff/ diff --git a/tiff/man/tiffmedian.1 b/tiff/man/tiffmedian.1 deleted file mode 100755 index c584b97..0000000 --- a/tiff/man/tiffmedian.1 +++ /dev/null @@ -1,112 +0,0 @@ -.\" $Id: tiffmedian.1,v 1.3 2005-11-02 11:07:19 dron Exp $ -.\" -.\" Copyright (c) 1990-1997 Sam Leffler -.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. -.\" -.\" Permission to use, copy, modify, distribute, and sell this software and -.\" its documentation for any purpose is hereby granted without fee, provided -.\" that (i) the above copyright notices and this permission notice appear in -.\" all copies of the software and related documentation, and (ii) the names of -.\" Sam Leffler and Silicon Graphics may not be used in any advertising or -.\" publicity relating to the software without the specific, prior written -.\" permission of Sam Leffler and Silicon Graphics. -.\" -.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -.\" -.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -.\" OF THIS SOFTWARE. -.\" -.if n .po 0 -.TH TIFFMEDIAN 1 "November 2, 2005" "libtiff" -.SH NAME -tiffmedian \- apply the median cut algorithm to data in a -.SM TIFF -file -.SH SYNOPSIS -.B tiffmedian -[ -.I options -] -.I input.tif -.I output.tif -.SH DESCRIPTION -.I tiffmedian -applies the median cut algorithm to an -.SM RGB -image in -.I input.tif -to generate a palette image that is written to -.IR output.tif . -The generated colormap has, by default, 256 entries. -The image data is quantized by mapping each -pixel to the closest color values in the colormap. -.SH OPTIONS -.TP -.B \-c -Specify the compression to use for data written to the output file: -.B none -for no compression, -.B packbits -for PackBits compression, -.B lzw -for Lempel-Ziv & Welch compression, -and -.B zip -for Deflate compression. -By default -.I tiffmedian -will compress data according to the value of the -.I Compression -tag found in the source file. -.IP -.SM LZW -compression can be specified together with a -.I predictor -value. -A predictor value of 2 causes -each scanline of the output image to undergo horizontal -differencing before it is encoded; a value -of 1 forces each scanline to be encoded without differencing. -LZW-specific options are specified by appending a ``:''-separated -list to the ``lzw'' option; e.g. -.B "\-c lzw:2" -for -.SM LZW -compression with horizontal differencing. -.TP -.B \-C -Specify the number of entries to use in the generated colormap. -By default all 256 entries/colors are used. -.TP -.B \-f -Apply Floyd-Steinberg dithering before selecting a colormap entry. -.TP -.B \-r -Specify the number of rows (scanlines) in each strip of data -written to the output file. -By default, -.I tiffmedian -attempts to set the rows/strip -that no more than 8 kilobytes of data appear in a strip. -.SH NOTES -This program is derived from Paul Heckbert's -.I median -program. -.SH "SEE ALSO" -.BR pal2rgb (1), -.BR tiffinfo (1), -.BR tiffcp (1), -.BR tiffcmp (1), -.BR libtiff (3TIFF) -.PP -.BR "Color Image Quantization for Frame Buffer Display", -Paul Heckbert, SIGGRAPH proceedings, 1982, pp. 297-307. -.PP -Libtiff library home page: -.BR http://www.remotesensing.org/libtiff/ diff --git a/tiff/man/tiffset.1 b/tiff/man/tiffset.1 deleted file mode 100755 index 516934d..0000000 --- a/tiff/man/tiffset.1 +++ /dev/null @@ -1,99 +0,0 @@ -.\" $Id: tiffset.1,v 1.6 2012-12-04 03:02:37 bfriesen Exp $ -.\" -.\" Copyright (c) 1988-1997 Sam Leffler -.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. -.\" -.\" Permission to use, copy, modify, distribute, and sell this software and -.\" its documentation for any purpose is hereby granted without fee, provided -.\" that (i) the above copyright notices and this permission notice appear in -.\" all copies of the software and related documentation, and (ii) the names of -.\" Sam Leffler and Silicon Graphics may not be used in any advertising or -.\" publicity relating to the software without the specific, prior written -.\" permission of Sam Leffler and Silicon Graphics. -.\" -.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -.\" -.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -.\" OF THIS SOFTWARE. -.\" -.if n .po 0 -.TH TIFFSET 1 "December 3, 2012" "libtiff" -.SH NAME -tiffset \- set or unset a field in a -.SM TIFF -header -.SH SYNOPSIS -.B tiffset -[ -.I options -] -.I filename.tif -.SH DESCRIPTION -.I Tiffset -sets the value of a -.SM TIFF -header to a specified value or removes an existing setting. -.SH OPTIONS -.TP -.BI \-d " dirnumber" -change the current directory (starting at 0). -.TP -.BI \-s " tagnumber" "\fR [\fP" " count" "\fR ]\fP" " value ..." -Set the value of the named tag to the value or values specified. -.TP -.BI \-sd " diroffset" -change the current directory by offset. -.TP -.BI \-sf " tagnumber filename" -Set the value of the tag to the contents of filename. This option is -supported for ASCII tags only. -.TP -.BI \-u " tagnumber" -Unset the tag. -.SH EXAMPLES -The following example sets the image description tag (270) of a.tif to -the contents of the file descrip: -.RS -.nf -tiffset \-sf 270 descrip a.tif -.fi -.RE -.PP -The following example sets the artist tag (315) of a.tif to the string -``Anonymous'': -.RS -.nf -tiffset \-s 315 Anonymous a.tif -.fi -.RE -.PP -This example sets the resolution of the file a.tif to 300 dpi: -.RS -.nf -tiffset \-s 296 2 a.tif -tiffset \-s 282 300.0 a.tif -tiffset \-s 283 300.0 a.tif -.fi -.RE -.PP -Set the photometric interpretation of the third page of a.tif to -min-is-black (ie. inverts it): -.RS -.nf -tiffset -d 2 -s 262 1 a.tif -.fi -.RE -.SH "SEE ALSO" -.BR tiffdump (1), -.BR tiffinfo (1), -.BR tiffcp (1), -.BR libtiff (3TIFF) -.PP -Libtiff library home page: -.BR http://www.remotesensing.org/libtiff/ diff --git a/tiff/man/tiffsplit.1 b/tiff/man/tiffsplit.1 deleted file mode 100755 index 411ebf4..0000000 --- a/tiff/man/tiffsplit.1 +++ /dev/null @@ -1,69 +0,0 @@ -.\" $Id: tiffsplit.1,v 1.6 2009-08-24 19:13:40 bfriesen Exp $ -.\" -.\" Copyright (c) 1992-1997 Sam Leffler -.\" Copyright (c) 1992-1997 Silicon Graphics, Inc. -.\" -.\" Permission to use, copy, modify, distribute, and sell this software and -.\" its documentation for any purpose is hereby granted without fee, provided -.\" that (i) the above copyright notices and this permission notice appear in -.\" all copies of the software and related documentation, and (ii) the names of -.\" Sam Leffler and Silicon Graphics may not be used in any advertising or -.\" publicity relating to the software without the specific, prior written -.\" permission of Sam Leffler and Silicon Graphics. -.\" -.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -.\" -.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -.\" OF THIS SOFTWARE. -.\" -.if n .po 0 -.TH TIFFSPLIT 1 "September 20, 2005" "libtiff" -.SH NAME -tiffsplit \- split a multi-image -.SM TIFF -into single-image -.SM TIFF -files -.SH SYNOPSIS -.B tiffsplit -.I src.tif -[ -.I prefix -] -.SH DESCRIPTION -.I tiffsplit -takes a multi-directory (page) -.SM TIFF -file and creates one or more single-directory (page) -.SM TIFF -files from it. -The output files are given names created by concatenating -a prefix, a lexically ordered -suffix in the range [\fIaaa\fP-\fIzzz\fP], the suffix -.I .tif -(e.g. -.IR xaaa.tif , -.IR xaab.tif , -.IR ... , -.IR xzzz.tif ). -If a prefix is not specified on the command line, -the default prefix of -.I x -is used. -.SH OPTIONS -None. -.SH BUGS -Only a select set of ``known tags'' is copied when splitting. -.SH "SEE ALSO" -.BR tiffcp (1), -.BR tiffinfo (1), -.BR libtiff (3TIFF) -.PP -Libtiff library home page: -.BR http://www.remotesensing.org/libtiff/ diff --git a/tiff/man/tiffsv.1 b/tiff/man/tiffsv.1 deleted file mode 100755 index 206df56..0000000 --- a/tiff/man/tiffsv.1 +++ /dev/null @@ -1,142 +0,0 @@ -.\" $Id: tiffsv.1,v 1.3 2005-11-02 11:07:19 dron Exp $ -.\" -.\" Copyright (c) 1988-1997 Sam Leffler -.\" Copyright (c) 1991-1997 Silicon Graphics, Inc. -.\" -.\" Permission to use, copy, modify, distribute, and sell this software and -.\" its documentation for any purpose is hereby granted without fee, provided -.\" that (i) the above copyright notices and this permission notice appear in -.\" all copies of the software and related documentation, and (ii) the names of -.\" Sam Leffler and Silicon Graphics may not be used in any advertising or -.\" publicity relating to the software without the specific, prior written -.\" permission of Sam Leffler and Silicon Graphics. -.\" -.\" THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -.\" EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -.\" WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -.\" -.\" IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -.\" ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -.\" OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -.\" WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -.\" LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -.\" OF THIS SOFTWARE. -.\" -.if n .po 0 -.TH TIFFSV 1 "September 20, 2005" "libtiff" -.SH NAME -tiffsv \- save an image from the framebuffer in a -.SM TIFF -file (Silicon Graphics version) -.SH SYNOPSIS -.B tiffsv -[ -.I options -] -.I output.tif -[ -.I "x1 x2 y1 y2" -] -.SH DESCRIPTION -.I tiffsv -saves all or part of the framebuffer in a file using the -Tag Image File Format, Revision 6.0. -By default, the image is saved with data samples packed (\c -.IR PlanarConfiguration =1), -compressed with the Lempel-Ziv & Welch algorithm (\c -.IR Compression =5), -and with each strip no more than 8 kilobytes. -These characteristics can be overridden, or explicitly specified -with the options described below. -.SH OPTIONS -.TP -.B \-b -Save the image as a greyscale image -as if it were processed by -.IR tiff2bw (1). -This option is included for compatibility with the standard -.IR scrsave (6D) -program. -.TP -.B \-c -Specify the compression to use for data written to the output file: -.B none -for no compression, -.B packbits -for PackBits compression, -.B jpeg -for baseline JPEG compression, -.B zip -for Deflate compression, -and -.B lzw -for Lempel-Ziv & Welch compression (default). -.IP -.SM LZW -compression can be specified together with a -.I predictor -value. -A predictor value of 2 causes -each scanline of the output image to undergo horizontal -differencing before it is encoded; a value -of 1 forces each scanline to be encoded without differencing. -LZW-specific options are specified by appending a ``:''-separated -list to the ``lzw'' option; e.g. -.B "\-c lzw:2" -for -.SM LZW -compression with horizontal differencing. -.TP -.B \-p -Specify the planar configuration to use in writing image data. -By default, -.I tiffsv -will create a new file with the data samples packed contiguously. -Specifying -.B "\-p contig" -will force data to be written with multi-sample data packed -together, while -.B "\-p separate" -will force samples to be written in separate planes. -.TP -.B \-r -Specify the number of rows (scanlines) in each strip of data -written to the output file. -By default, -.I tiffsv -attempts to set the rows/strip -that no more than 8 kilobytes of data appear in a strip. -.SH NOTE -Except for the use of -.SM TIFF, -this program is equivalent to the standard -.I scrsave -program. -This means, for example, that you can use it in conjunction with -the standard -.IR icut -program simply by creating a link called -.IR scrsave , -or by creating a shell script called -.I scrsave -that invokes -.I tiffgt -with the appropriate options. -.SH BUGS -If data are saved compressed and in separate planes, then the -rows in each strip is silently set to one to avoid limitations -in the -.BR libtiff (3TIFF) -library. -.SH "SEE ALSO" -.BR scrsave (6D) -.BR pal2rgb (1), -.BR tiffdump (1), -.BR tiffgt (1), -.BR tiffinfo (1), -.BR tiffcp (1), -.BR tiffmedian (1), -.BR libtiff (3TIFF) -.PP -Libtiff library home page: -.BR http://www.remotesensing.org/libtiff/ |