summaryrefslogtreecommitdiff
path: root/zlib/gzread.c
diff options
context:
space:
mode:
Diffstat (limited to 'zlib/gzread.c')
-rwxr-xr-xzlib/gzread.c653
1 files changed, 0 insertions, 653 deletions
diff --git a/zlib/gzread.c b/zlib/gzread.c
deleted file mode 100755
index 548201a..0000000
--- a/zlib/gzread.c
+++ /dev/null
@@ -1,653 +0,0 @@
-/* gzread.c -- zlib functions for reading gzip files
- * Copyright (C) 2004, 2005, 2010 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-#include "gzguts.h"
-
-/* Local functions */
-local int gz_load OF((gz_statep, unsigned char *, unsigned, unsigned *));
-local int gz_avail OF((gz_statep));
-local int gz_next4 OF((gz_statep, unsigned long *));
-local int gz_head OF((gz_statep));
-local int gz_decomp OF((gz_statep));
-local int gz_make OF((gz_statep));
-local int gz_skip OF((gz_statep, z_off64_t));
-
-/* Use read() to load a buffer -- return -1 on error, otherwise 0. Read from
- state->fd, and update state->eof, state->err, and state->msg as appropriate.
- This function needs to loop on read(), since read() is not guaranteed to
- read the number of bytes requested, depending on the type of descriptor. */
-local int gz_load(state, buf, len, have)
- gz_statep state;
- unsigned char *buf;
- unsigned len;
- unsigned *have;
-{
- int ret;
-
- *have = 0;
- do {
- ret = read(state->fd, buf + *have, len - *have);
- if (ret <= 0)
- break;
- *have += ret;
- } while (*have < len);
- if (ret < 0) {
- gz_error(state, Z_ERRNO, zstrerror());
- return -1;
- }
- if (ret == 0)
- state->eof = 1;
- return 0;
-}
-
-/* Load up input buffer and set eof flag if last data loaded -- return -1 on
- error, 0 otherwise. Note that the eof flag is set when the end of the input
- file is reached, even though there may be unused data in the buffer. Once
- that data has been used, no more attempts will be made to read the file.
- gz_avail() assumes that strm->avail_in == 0. */
-local int gz_avail(state)
- gz_statep state;
-{
- z_streamp strm = &(state->strm);
-
- if (state->err != Z_OK)
- return -1;
- if (state->eof == 0) {
- if (gz_load(state, state->in, state->size,
- (unsigned *)&(strm->avail_in)) == -1)
- return -1;
- strm->next_in = state->in;
- }
- return 0;
-}
-
-/* Get next byte from input, or -1 if end or error. */
-#define NEXT() ((strm->avail_in == 0 && gz_avail(state) == -1) ? -1 : \
- (strm->avail_in == 0 ? -1 : \
- (strm->avail_in--, *(strm->next_in)++)))
-
-/* Get a four-byte little-endian integer and return 0 on success and the value
- in *ret. Otherwise -1 is returned and *ret is not modified. */
-local int gz_next4(state, ret)
- gz_statep state;
- unsigned long *ret;
-{
- int ch;
- unsigned long val;
- z_streamp strm = &(state->strm);
-
- val = NEXT();
- val += (unsigned)NEXT() << 8;
- val += (unsigned long)NEXT() << 16;
- ch = NEXT();
- if (ch == -1)
- return -1;
- val += (unsigned long)ch << 24;
- *ret = val;
- return 0;
-}
-
-/* Look for gzip header, set up for inflate or copy. state->have must be zero.
- If this is the first time in, allocate required memory. state->how will be
- left unchanged if there is no more input data available, will be set to COPY
- if there is no gzip header and direct copying will be performed, or it will
- be set to GZIP for decompression, and the gzip header will be skipped so
- that the next available input data is the raw deflate stream. If direct
- copying, then leftover input data from the input buffer will be copied to
- the output buffer. In that case, all further file reads will be directly to
- either the output buffer or a user buffer. If decompressing, the inflate
- state and the check value will be initialized. gz_head() will return 0 on
- success or -1 on failure. Failures may include read errors or gzip header
- errors. */
-local int gz_head(state)
- gz_statep state;
-{
- z_streamp strm = &(state->strm);
- int flags;
- unsigned len;
-
- /* allocate read buffers and inflate memory */
- if (state->size == 0) {
- /* allocate buffers */
- state->in = malloc(state->want);
- state->out = malloc(state->want << 1);
- if (state->in == NULL || state->out == NULL) {
- if (state->out != NULL)
- free(state->out);
- if (state->in != NULL)
- free(state->in);
- gz_error(state, Z_MEM_ERROR, "out of memory");
- return -1;
- }
- state->size = state->want;
-
- /* allocate inflate memory */
- state->strm.zalloc = Z_NULL;
- state->strm.zfree = Z_NULL;
- state->strm.opaque = Z_NULL;
- state->strm.avail_in = 0;
- state->strm.next_in = Z_NULL;
- if (inflateInit2(&(state->strm), -15) != Z_OK) { /* raw inflate */
- free(state->out);
- free(state->in);
- state->size = 0;
- gz_error(state, Z_MEM_ERROR, "out of memory");
- return -1;
- }
- }
-
- /* get some data in the input buffer */
- if (strm->avail_in == 0) {
- if (gz_avail(state) == -1)
- return -1;
- if (strm->avail_in == 0)
- return 0;
- }
-
- /* look for the gzip magic header bytes 31 and 139 */
- if (strm->next_in[0] == 31) {
- strm->avail_in--;
- strm->next_in++;
- if (strm->avail_in == 0 && gz_avail(state) == -1)
- return -1;
- if (strm->avail_in && strm->next_in[0] == 139) {
- /* we have a gzip header, woo hoo! */
- strm->avail_in--;
- strm->next_in++;
-
- /* skip rest of header */
- if (NEXT() != 8) { /* compression method */
- gz_error(state, Z_DATA_ERROR, "unknown compression method");
- return -1;
- }
- flags = NEXT();
- if (flags & 0xe0) { /* reserved flag bits */
- gz_error(state, Z_DATA_ERROR, "unknown header flags set");
- return -1;
- }
- NEXT(); /* modification time */
- NEXT();
- NEXT();
- NEXT();
- NEXT(); /* extra flags */
- NEXT(); /* operating system */
- if (flags & 4) { /* extra field */
- len = (unsigned)NEXT();
- len += (unsigned)NEXT() << 8;
- while (len--)
- if (NEXT() < 0)
- break;
- }
- if (flags & 8) /* file name */
- while (NEXT() > 0)
- ;
- if (flags & 16) /* comment */
- while (NEXT() > 0)
- ;
- if (flags & 2) { /* header crc */
- NEXT();
- NEXT();
- }
- /* an unexpected end of file is not checked for here -- it will be
- noticed on the first request for uncompressed data */
-
- /* set up for decompression */
- inflateReset(strm);
- strm->adler = crc32(0L, Z_NULL, 0);
- state->how = GZIP;
- state->direct = 0;
- return 0;
- }
- else {
- /* not a gzip file -- save first byte (31) and fall to raw i/o */
- state->out[0] = 31;
- state->have = 1;
- }
- }
-
- /* doing raw i/o, save start of raw data for seeking, copy any leftover
- input to output -- this assumes that the output buffer is larger than
- the input buffer, which also assures space for gzungetc() */
- state->raw = state->pos;
- state->next = state->out;
- if (strm->avail_in) {
- memcpy(state->next + state->have, strm->next_in, strm->avail_in);
- state->have += strm->avail_in;
- strm->avail_in = 0;
- }
- state->how = COPY;
- state->direct = 1;
- return 0;
-}
-
-/* Decompress from input to the provided next_out and avail_out in the state.
- If the end of the compressed data is reached, then verify the gzip trailer
- check value and length (modulo 2^32). state->have and state->next are set
- to point to the just decompressed data, and the crc is updated. If the
- trailer is verified, state->how is reset to LOOK to look for the next gzip
- stream or raw data, once state->have is depleted. Returns 0 on success, -1
- on failure. Failures may include invalid compressed data or a failed gzip
- trailer verification. */
-local int gz_decomp(state)
- gz_statep state;
-{
- int ret;
- unsigned had;
- unsigned long crc, len;
- z_streamp strm = &(state->strm);
-
- /* fill output buffer up to end of deflate stream */
- had = strm->avail_out;
- do {
- /* get more input for inflate() */
- if (strm->avail_in == 0 && gz_avail(state) == -1)
- return -1;
- if (strm->avail_in == 0) {
- gz_error(state, Z_DATA_ERROR, "unexpected end of file");
- return -1;
- }
-
- /* decompress and handle errors */
- ret = inflate(strm, Z_NO_FLUSH);
- if (ret == Z_STREAM_ERROR || ret == Z_NEED_DICT) {
- gz_error(state, Z_STREAM_ERROR,
- "internal error: inflate stream corrupt");
- return -1;
- }
- if (ret == Z_MEM_ERROR) {
- gz_error(state, Z_MEM_ERROR, "out of memory");
- return -1;
- }
- if (ret == Z_DATA_ERROR) { /* deflate stream invalid */
- gz_error(state, Z_DATA_ERROR,
- strm->msg == NULL ? "compressed data error" : strm->msg);
- return -1;
- }
- } while (strm->avail_out && ret != Z_STREAM_END);
-
- /* update available output and crc check value */
- state->have = had - strm->avail_out;
- state->next = strm->next_out - state->have;
- strm->adler = crc32(strm->adler, state->next, state->have);
-
- /* check gzip trailer if at end of deflate stream */
- if (ret == Z_STREAM_END) {
- if (gz_next4(state, &crc) == -1 || gz_next4(state, &len) == -1) {
- gz_error(state, Z_DATA_ERROR, "unexpected end of file");
- return -1;
- }
- if (crc != strm->adler) {
- gz_error(state, Z_DATA_ERROR, "incorrect data check");
- return -1;
- }
- if (len != (strm->total_out & 0xffffffffL)) {
- gz_error(state, Z_DATA_ERROR, "incorrect length check");
- return -1;
- }
- state->how = LOOK; /* ready for next stream, once have is 0 (leave
- state->direct unchanged to remember how) */
- }
-
- /* good decompression */
- return 0;
-}
-
-/* Make data and put in the output buffer. Assumes that state->have == 0.
- Data is either copied from the input file or decompressed from the input
- file depending on state->how. If state->how is LOOK, then a gzip header is
- looked for (and skipped if found) to determine wither to copy or decompress.
- Returns -1 on error, otherwise 0. gz_make() will leave state->have as COPY
- or GZIP unless the end of the input file has been reached and all data has
- been processed. */
-local int gz_make(state)
- gz_statep state;
-{
- z_streamp strm = &(state->strm);
-
- if (state->how == LOOK) { /* look for gzip header */
- if (gz_head(state) == -1)
- return -1;
- if (state->have) /* got some data from gz_head() */
- return 0;
- }
- if (state->how == COPY) { /* straight copy */
- if (gz_load(state, state->out, state->size << 1, &(state->have)) == -1)
- return -1;
- state->next = state->out;
- }
- else if (state->how == GZIP) { /* decompress */
- strm->avail_out = state->size << 1;
- strm->next_out = state->out;
- if (gz_decomp(state) == -1)
- return -1;
- }
- return 0;
-}
-
-/* Skip len uncompressed bytes of output. Return -1 on error, 0 on success. */
-local int gz_skip(state, len)
- gz_statep state;
- z_off64_t len;
-{
- unsigned n;
-
- /* skip over len bytes or reach end-of-file, whichever comes first */
- while (len)
- /* skip over whatever is in output buffer */
- if (state->have) {
- n = GT_OFF(state->have) || (z_off64_t)state->have > len ?
- (unsigned)len : state->have;
- state->have -= n;
- state->next += n;
- state->pos += n;
- len -= n;
- }
-
- /* output buffer empty -- return if we're at the end of the input */
- else if (state->eof && state->strm.avail_in == 0)
- break;
-
- /* need more data to skip -- load up output buffer */
- else {
- /* get more output, looking for header if required */
- if (gz_make(state) == -1)
- return -1;
- }
- return 0;
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzread(file, buf, len)
- gzFile file;
- voidp buf;
- unsigned len;
-{
- unsigned got, n;
- gz_statep state;
- z_streamp strm;
-
- /* get internal structure */
- if (file == NULL)
- return -1;
- state = (gz_statep)file;
- strm = &(state->strm);
-
- /* check that we're reading and that there's no error */
- if (state->mode != GZ_READ || state->err != Z_OK)
- return -1;
-
- /* since an int is returned, make sure len fits in one, otherwise return
- with an error (this avoids the flaw in the interface) */
- if ((int)len < 0) {
- gz_error(state, Z_BUF_ERROR, "requested length does not fit in int");
- return -1;
- }
-
- /* if len is zero, avoid unnecessary operations */
- if (len == 0)
- return 0;
-
- /* process a skip request */
- if (state->seek) {
- state->seek = 0;
- if (gz_skip(state, state->skip) == -1)
- return -1;
- }
-
- /* get len bytes to buf, or less than len if at the end */
- got = 0;
- do {
- /* first just try copying data from the output buffer */
- if (state->have) {
- n = state->have > len ? len : state->have;
- memcpy(buf, state->next, n);
- state->next += n;
- state->have -= n;
- }
-
- /* output buffer empty -- return if we're at the end of the input */
- else if (state->eof && strm->avail_in == 0)
- break;
-
- /* need output data -- for small len or new stream load up our output
- buffer */
- else if (state->how == LOOK || len < (state->size << 1)) {
- /* get more output, looking for header if required */
- if (gz_make(state) == -1)
- return -1;
- continue; /* no progress yet -- go back to memcpy() above */
- /* the copy above assures that we will leave with space in the
- output buffer, allowing at least one gzungetc() to succeed */
- }
-
- /* large len -- read directly into user buffer */
- else if (state->how == COPY) { /* read directly */
- if (gz_load(state, buf, len, &n) == -1)
- return -1;
- }
-
- /* large len -- decompress directly into user buffer */
- else { /* state->how == GZIP */
- strm->avail_out = len;
- strm->next_out = buf;
- if (gz_decomp(state) == -1)
- return -1;
- n = state->have;
- state->have = 0;
- }
-
- /* update progress */
- len -= n;
- buf = (char *)buf + n;
- got += n;
- state->pos += n;
- } while (len);
-
- /* return number of bytes read into user buffer (will fit in int) */
- return (int)got;
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzgetc(file)
- gzFile file;
-{
- int ret;
- unsigned char buf[1];
- gz_statep state;
-
- /* get internal structure */
- if (file == NULL)
- return -1;
- state = (gz_statep)file;
-
- /* check that we're reading and that there's no error */
- if (state->mode != GZ_READ || state->err != Z_OK)
- return -1;
-
- /* try output buffer (no need to check for skip request) */
- if (state->have) {
- state->have--;
- state->pos++;
- return *(state->next)++;
- }
-
- /* nothing there -- try gzread() */
- ret = gzread(file, buf, 1);
- return ret < 1 ? -1 : buf[0];
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzungetc(c, file)
- int c;
- gzFile file;
-{
- gz_statep state;
-
- /* get internal structure */
- if (file == NULL)
- return -1;
- state = (gz_statep)file;
-
- /* check that we're reading and that there's no error */
- if (state->mode != GZ_READ || state->err != Z_OK)
- return -1;
-
- /* process a skip request */
- if (state->seek) {
- state->seek = 0;
- if (gz_skip(state, state->skip) == -1)
- return -1;
- }
-
- /* can't push EOF */
- if (c < 0)
- return -1;
-
- /* if output buffer empty, put byte at end (allows more pushing) */
- if (state->have == 0) {
- state->have = 1;
- state->next = state->out + (state->size << 1) - 1;
- state->next[0] = c;
- state->pos--;
- return c;
- }
-
- /* if no room, give up (must have already done a gzungetc()) */
- if (state->have == (state->size << 1)) {
- gz_error(state, Z_BUF_ERROR, "out of room to push characters");
- return -1;
- }
-
- /* slide output data if needed and insert byte before existing data */
- if (state->next == state->out) {
- unsigned char *src = state->out + state->have;
- unsigned char *dest = state->out + (state->size << 1);
- while (src > state->out)
- *--dest = *--src;
- state->next = dest;
- }
- state->have++;
- state->next--;
- state->next[0] = c;
- state->pos--;
- return c;
-}
-
-/* -- see zlib.h -- */
-char * ZEXPORT gzgets(file, buf, len)
- gzFile file;
- char *buf;
- int len;
-{
- unsigned left, n;
- char *str;
- unsigned char *eol;
- gz_statep state;
-
- /* check parameters and get internal structure */
- if (file == NULL || buf == NULL || len < 1)
- return NULL;
- state = (gz_statep)file;
-
- /* check that we're reading and that there's no error */
- if (state->mode != GZ_READ || state->err != Z_OK)
- return NULL;
-
- /* process a skip request */
- if (state->seek) {
- state->seek = 0;
- if (gz_skip(state, state->skip) == -1)
- return NULL;
- }
-
- /* copy output bytes up to new line or len - 1, whichever comes first --
- append a terminating zero to the string (we don't check for a zero in
- the contents, let the user worry about that) */
- str = buf;
- left = (unsigned)len - 1;
- if (left) do {
- /* assure that something is in the output buffer */
- if (state->have == 0) {
- if (gz_make(state) == -1)
- return NULL; /* error */
- if (state->have == 0) { /* end of file */
- if (buf == str) /* got bupkus */
- return NULL;
- break; /* got something -- return it */
- }
- }
-
- /* look for end-of-line in current output buffer */
- n = state->have > left ? left : state->have;
- eol = memchr(state->next, '\n', n);
- if (eol != NULL)
- n = (unsigned)(eol - state->next) + 1;
-
- /* copy through end-of-line, or remainder if not found */
- memcpy(buf, state->next, n);
- state->have -= n;
- state->next += n;
- state->pos += n;
- left -= n;
- buf += n;
- } while (left && eol == NULL);
-
- /* found end-of-line or out of space -- terminate string and return it */
- buf[0] = 0;
- return str;
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzdirect(file)
- gzFile file;
-{
- gz_statep state;
-
- /* get internal structure */
- if (file == NULL)
- return 0;
- state = (gz_statep)file;
-
- /* check that we're reading */
- if (state->mode != GZ_READ)
- return 0;
-
- /* if the state is not known, but we can find out, then do so (this is
- mainly for right after a gzopen() or gzdopen()) */
- if (state->how == LOOK && state->have == 0)
- (void)gz_head(state);
-
- /* return 1 if reading direct, 0 if decompressing a gzip stream */
- return state->direct;
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzclose_r(file)
- gzFile file;
-{
- int ret;
- gz_statep state;
-
- /* get internal structure */
- if (file == NULL)
- return Z_STREAM_ERROR;
- state = (gz_statep)file;
-
- /* check that we're reading */
- if (state->mode != GZ_READ)
- return Z_STREAM_ERROR;
-
- /* free memory and close file */
- if (state->size) {
- inflateEnd(&(state->strm));
- free(state->out);
- free(state->in);
- }
- gz_error(state, Z_OK, NULL);
- free(state->path);
- ret = close(state->fd);
- free(state);
- return ret ? Z_ERRNO : Z_OK;
-}