summaryrefslogtreecommitdiff
path: root/zlib/gzwrite.c
diff options
context:
space:
mode:
Diffstat (limited to 'zlib/gzwrite.c')
-rw-r--r--zlib/gzwrite.c531
1 files changed, 0 insertions, 531 deletions
diff --git a/zlib/gzwrite.c b/zlib/gzwrite.c
deleted file mode 100644
index e8defc6..0000000
--- a/zlib/gzwrite.c
+++ /dev/null
@@ -1,531 +0,0 @@
-/* gzwrite.c -- zlib functions for writing gzip files
- * Copyright (C) 2004, 2005, 2010 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-#include "gzguts.h"
-
-/* Local functions */
-local int gz_init OF((gz_statep));
-local int gz_comp OF((gz_statep, int));
-local int gz_zero OF((gz_statep, z_off64_t));
-
-/* Initialize state for writing a gzip file. Mark initialization by setting
- state->size to non-zero. Return -1 on failure or 0 on success. */
-local int gz_init(state)
- gz_statep state;
-{
- int ret;
- z_streamp strm = &(state->strm);
-
- /* allocate input and output buffers */
- state->in = malloc(state->want);
- state->out = malloc(state->want);
- if (state->in == NULL || state->out == NULL) {
- if (state->out != NULL)
- free(state->out);
- if (state->in != NULL)
- free(state->in);
- gz_error(state, Z_MEM_ERROR, "out of memory");
- return -1;
- }
-
- /* allocate deflate memory, set up for gzip compression */
- strm->zalloc = Z_NULL;
- strm->zfree = Z_NULL;
- strm->opaque = Z_NULL;
- ret = deflateInit2(strm, state->level, Z_DEFLATED,
- 15 + 16, 8, state->strategy);
- if (ret != Z_OK) {
- free(state->in);
- gz_error(state, Z_MEM_ERROR, "out of memory");
- return -1;
- }
-
- /* mark state as initialized */
- state->size = state->want;
-
- /* initialize write buffer */
- strm->avail_out = state->size;
- strm->next_out = state->out;
- state->next = strm->next_out;
- return 0;
-}
-
-/* Compress whatever is at avail_in and next_in and write to the output file.
- Return -1 if there is an error writing to the output file, otherwise 0.
- flush is assumed to be a valid deflate() flush value. If flush is Z_FINISH,
- then the deflate() state is reset to start a new gzip stream. */
-local int gz_comp(state, flush)
- gz_statep state;
- int flush;
-{
- int ret, got;
- unsigned have;
- z_streamp strm = &(state->strm);
-
- /* allocate memory if this is the first time through */
- if (state->size == 0 && gz_init(state) == -1)
- return -1;
-
- /* run deflate() on provided input until it produces no more output */
- ret = Z_OK;
- do {
- /* write out current buffer contents if full, or if flushing, but if
- doing Z_FINISH then don't write until we get to Z_STREAM_END */
- if (strm->avail_out == 0 || (flush != Z_NO_FLUSH &&
- (flush != Z_FINISH || ret == Z_STREAM_END))) {
- have = (unsigned)(strm->next_out - state->next);
- if (have && ((got = write(state->fd, state->next, have)) < 0 ||
- (unsigned)got != have)) {
- gz_error(state, Z_ERRNO, zstrerror());
- return -1;
- }
- if (strm->avail_out == 0) {
- strm->avail_out = state->size;
- strm->next_out = state->out;
- }
- state->next = strm->next_out;
- }
-
- /* compress */
- have = strm->avail_out;
- ret = deflate(strm, flush);
- if (ret == Z_STREAM_ERROR) {
- gz_error(state, Z_STREAM_ERROR,
- "internal error: deflate stream corrupt");
- return -1;
- }
- have -= strm->avail_out;
- } while (have);
-
- /* if that completed a deflate stream, allow another to start */
- if (flush == Z_FINISH)
- deflateReset(strm);
-
- /* all done, no errors */
- return 0;
-}
-
-/* Compress len zeros to output. Return -1 on error, 0 on success. */
-local int gz_zero(state, len)
- gz_statep state;
- z_off64_t len;
-{
- int first;
- unsigned n;
- z_streamp strm = &(state->strm);
-
- /* consume whatever's left in the input buffer */
- if (strm->avail_in && gz_comp(state, Z_NO_FLUSH) == -1)
- return -1;
-
- /* compress len zeros (len guaranteed > 0) */
- first = 1;
- while (len) {
- n = GT_OFF(state->size) || (z_off64_t)state->size > len ?
- (unsigned)len : state->size;
- if (first) {
- memset(state->in, 0, n);
- first = 0;
- }
- strm->avail_in = n;
- strm->next_in = state->in;
- state->pos += n;
- if (gz_comp(state, Z_NO_FLUSH) == -1)
- return -1;
- len -= n;
- }
- return 0;
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzwrite(file, buf, len)
- gzFile file;
- voidpc buf;
- unsigned len;
-{
- unsigned put = len;
- unsigned n;
- gz_statep state;
- z_streamp strm;
-
- /* get internal structure */
- if (file == NULL)
- return 0;
- state = (gz_statep)file;
- strm = &(state->strm);
-
- /* check that we're writing and that there's no error */
- if (state->mode != GZ_WRITE || state->err != Z_OK)
- return 0;
-
- /* since an int is returned, make sure len fits in one, otherwise return
- with an error (this avoids the flaw in the interface) */
- if ((int)len < 0) {
- gz_error(state, Z_BUF_ERROR, "requested length does not fit in int");
- return 0;
- }
-
- /* if len is zero, avoid unnecessary operations */
- if (len == 0)
- return 0;
-
- /* allocate memory if this is the first time through */
- if (state->size == 0 && gz_init(state) == -1)
- return 0;
-
- /* check for seek request */
- if (state->seek) {
- state->seek = 0;
- if (gz_zero(state, state->skip) == -1)
- return 0;
- }
-
- /* for small len, copy to input buffer, otherwise compress directly */
- if (len < state->size) {
- /* copy to input buffer, compress when full */
- do {
- if (strm->avail_in == 0)
- strm->next_in = state->in;
- n = state->size - strm->avail_in;
- if (n > len)
- n = len;
- memcpy(strm->next_in + strm->avail_in, buf, n);
- strm->avail_in += n;
- state->pos += n;
- buf = (char *)buf + n;
- len -= n;
- if (len && gz_comp(state, Z_NO_FLUSH) == -1)
- return 0;
- } while (len);
- }
- else {
- /* consume whatever's left in the input buffer */
- if (strm->avail_in && gz_comp(state, Z_NO_FLUSH) == -1)
- return 0;
-
- /* directly compress user buffer to file */
- strm->avail_in = len;
- strm->next_in = (voidp)buf;
- state->pos += len;
- if (gz_comp(state, Z_NO_FLUSH) == -1)
- return 0;
- }
-
- /* input was all buffered or compressed (put will fit in int) */
- return (int)put;
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzputc(file, c)
- gzFile file;
- int c;
-{
- unsigned char buf[1];
- gz_statep state;
- z_streamp strm;
-
- /* get internal structure */
- if (file == NULL)
- return -1;
- state = (gz_statep)file;
- strm = &(state->strm);
-
- /* check that we're writing and that there's no error */
- if (state->mode != GZ_WRITE || state->err != Z_OK)
- return -1;
-
- /* check for seek request */
- if (state->seek) {
- state->seek = 0;
- if (gz_zero(state, state->skip) == -1)
- return -1;
- }
-
- /* try writing to input buffer for speed (state->size == 0 if buffer not
- initialized) */
- if (strm->avail_in < state->size) {
- if (strm->avail_in == 0)
- strm->next_in = state->in;
- strm->next_in[strm->avail_in++] = c;
- state->pos++;
- return c;
- }
-
- /* no room in buffer or not initialized, use gz_write() */
- buf[0] = c;
- if (gzwrite(file, buf, 1) != 1)
- return -1;
- return c;
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzputs(file, str)
- gzFile file;
- const char *str;
-{
- int ret;
- unsigned len;
-
- /* write string */
- len = (unsigned)strlen(str);
- ret = gzwrite(file, str, len);
- return ret == 0 && len != 0 ? -1 : ret;
-}
-
-#ifdef STDC
-#include <stdarg.h>
-
-/* -- see zlib.h -- */
-int ZEXPORTVA gzprintf (gzFile file, const char *format, ...)
-{
- int size, len;
- gz_statep state;
- z_streamp strm;
- va_list va;
-
- /* get internal structure */
- if (file == NULL)
- return -1;
- state = (gz_statep)file;
- strm = &(state->strm);
-
- /* check that we're writing and that there's no error */
- if (state->mode != GZ_WRITE || state->err != Z_OK)
- return 0;
-
- /* make sure we have some buffer space */
- if (state->size == 0 && gz_init(state) == -1)
- return 0;
-
- /* check for seek request */
- if (state->seek) {
- state->seek = 0;
- if (gz_zero(state, state->skip) == -1)
- return 0;
- }
-
- /* consume whatever's left in the input buffer */
- if (strm->avail_in && gz_comp(state, Z_NO_FLUSH) == -1)
- return 0;
-
- /* do the printf() into the input buffer, put length in len */
- size = (int)(state->size);
- state->in[size - 1] = 0;
- va_start(va, format);
-#ifdef NO_vsnprintf
-# ifdef HAS_vsprintf_void
- (void)vsprintf(state->in, format, va);
- va_end(va);
- for (len = 0; len < size; len++)
- if (state->in[len] == 0) break;
-# else
- len = vsprintf(state->in, format, va);
- va_end(va);
-# endif
-#else
-# ifdef HAS_vsnprintf_void
- (void)vsnprintf(state->in, size, format, va);
- va_end(va);
- len = strlen(state->in);
-# else
- len = vsnprintf((char *)(state->in), size, format, va);
- va_end(va);
-# endif
-#endif
-
- /* check that printf() results fit in buffer */
- if (len <= 0 || len >= (int)size || state->in[size - 1] != 0)
- return 0;
-
- /* update buffer and position, defer compression until needed */
- strm->avail_in = (unsigned)len;
- strm->next_in = state->in;
- state->pos += len;
- return len;
-}
-
-#else /* !STDC */
-
-/* -- see zlib.h -- */
-int ZEXPORTVA gzprintf (file, format, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10,
- a11, a12, a13, a14, a15, a16, a17, a18, a19, a20)
- gzFile file;
- const char *format;
- int a1, a2, a3, a4, a5, a6, a7, a8, a9, a10,
- a11, a12, a13, a14, a15, a16, a17, a18, a19, a20;
-{
- int size, len;
- gz_statep state;
- z_streamp strm;
-
- /* get internal structure */
- if (file == NULL)
- return -1;
- state = (gz_statep)file;
- strm = &(state->strm);
-
- /* check that we're writing and that there's no error */
- if (state->mode != GZ_WRITE || state->err != Z_OK)
- return 0;
-
- /* make sure we have some buffer space */
- if (state->size == 0 && gz_init(state) == -1)
- return 0;
-
- /* check for seek request */
- if (state->seek) {
- state->seek = 0;
- if (gz_zero(state, state->skip) == -1)
- return 0;
- }
-
- /* consume whatever's left in the input buffer */
- if (strm->avail_in && gz_comp(state, Z_NO_FLUSH) == -1)
- return 0;
-
- /* do the printf() into the input buffer, put length in len */
- size = (int)(state->size);
- state->in[size - 1] = 0;
-#ifdef NO_snprintf
-# ifdef HAS_sprintf_void
- sprintf(state->in, format, a1, a2, a3, a4, a5, a6, a7, a8,
- a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
- for (len = 0; len < size; len++)
- if (state->in[len] == 0) break;
-# else
- len = sprintf(state->in, format, a1, a2, a3, a4, a5, a6, a7, a8,
- a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
-# endif
-#else
-# ifdef HAS_snprintf_void
- snprintf(state->in, size, format, a1, a2, a3, a4, a5, a6, a7, a8,
- a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
- len = strlen(state->in);
-# else
- len = snprintf(state->in, size, format, a1, a2, a3, a4, a5, a6, a7, a8,
- a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
-# endif
-#endif
-
- /* check that printf() results fit in buffer */
- if (len <= 0 || len >= (int)size || state->in[size - 1] != 0)
- return 0;
-
- /* update buffer and position, defer compression until needed */
- strm->avail_in = (unsigned)len;
- strm->next_in = state->in;
- state->pos += len;
- return len;
-}
-
-#endif
-
-/* -- see zlib.h -- */
-int ZEXPORT gzflush(file, flush)
- gzFile file;
- int flush;
-{
- gz_statep state;
-
- /* get internal structure */
- if (file == NULL)
- return -1;
- state = (gz_statep)file;
-
- /* check that we're writing and that there's no error */
- if (state->mode != GZ_WRITE || state->err != Z_OK)
- return Z_STREAM_ERROR;
-
- /* check flush parameter */
- if (flush < 0 || flush > Z_FINISH)
- return Z_STREAM_ERROR;
-
- /* check for seek request */
- if (state->seek) {
- state->seek = 0;
- if (gz_zero(state, state->skip) == -1)
- return -1;
- }
-
- /* compress remaining data with requested flush */
- gz_comp(state, flush);
- return state->err;
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzsetparams(file, level, strategy)
- gzFile file;
- int level;
- int strategy;
-{
- gz_statep state;
- z_streamp strm;
-
- /* get internal structure */
- if (file == NULL)
- return Z_STREAM_ERROR;
- state = (gz_statep)file;
- strm = &(state->strm);
-
- /* check that we're writing and that there's no error */
- if (state->mode != GZ_WRITE || state->err != Z_OK)
- return Z_STREAM_ERROR;
-
- /* if no change is requested, then do nothing */
- if (level == state->level && strategy == state->strategy)
- return Z_OK;
-
- /* check for seek request */
- if (state->seek) {
- state->seek = 0;
- if (gz_zero(state, state->skip) == -1)
- return -1;
- }
-
- /* change compression parameters for subsequent input */
- if (state->size) {
- /* flush previous input with previous parameters before changing */
- if (strm->avail_in && gz_comp(state, Z_PARTIAL_FLUSH) == -1)
- return state->err;
- deflateParams(strm, level, strategy);
- }
- state->level = level;
- state->strategy = strategy;
- return Z_OK;
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzclose_w(file)
- gzFile file;
-{
- int ret = 0;
- gz_statep state;
-
- /* get internal structure */
- if (file == NULL)
- return Z_STREAM_ERROR;
- state = (gz_statep)file;
-
- /* check that we're writing */
- if (state->mode != GZ_WRITE)
- return Z_STREAM_ERROR;
-
- /* check for seek request */
- if (state->seek) {
- state->seek = 0;
- ret += gz_zero(state, state->skip);
- }
-
- /* flush, free memory, and close file */
- ret += gz_comp(state, Z_FINISH);
- (void)deflateEnd(&(state->strm));
- free(state->out);
- free(state->in);
- gz_error(state, Z_OK, NULL);
- free(state->path);
- ret += close(state->fd);
- free(state);
- return ret ? Z_ERRNO : Z_OK;
-}