From 094535c010320967639e8e86f974d878e80baa72 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?J=C3=B6rg=20Frings-F=C3=BCrst?= Date: Fri, 1 May 2015 16:13:57 +0200 Subject: Imported Upstream version 1.7.0 --- ccast/axTLS/loader.c | 483 +++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 483 insertions(+) create mode 100644 ccast/axTLS/loader.c (limited to 'ccast/axTLS/loader.c') diff --git a/ccast/axTLS/loader.c b/ccast/axTLS/loader.c new file mode 100644 index 0000000..92167be --- /dev/null +++ b/ccast/axTLS/loader.c @@ -0,0 +1,483 @@ +/* + * Copyright (c) 2007, Cameron Rich + * + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * * Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * * Neither the name of the axTLS project nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/** + * Load certificates/keys into memory. These can be in many different formats. + * PEM support and other formats can be processed here. + * + * The PEM private keys may be optionally encrypted with AES128 or AES256. + * The encrypted PEM keys were generated with something like: + * + * openssl genrsa -aes128 -passout pass:abcd -out axTLS.key_aes128.pem 512 + */ + +#include +#include +#include +#include "os_port.h" +#include "ssl.h" + +static int do_obj(SSL_CTX *ssl_ctx, int obj_type, + SSLObjLoader *ssl_obj, const char *password); +#ifdef CONFIG_SSL_HAS_PEM +static int ssl_obj_PEM_load(SSL_CTX *ssl_ctx, int obj_type, + SSLObjLoader *ssl_obj, const char *password); +#endif + +/* + * Load a file into memory that is in binary DER (or ascii PEM) format. + */ +EXP_FUNC int STDCALL ssl_obj_load(SSL_CTX *ssl_ctx, int obj_type, + const char *filename, const char *password) +{ +#ifndef CONFIG_SSL_SKELETON_MODE + static const char * const begin = "-----BEGIN"; + int ret = SSL_OK; + SSLObjLoader *ssl_obj = NULL; + + if (filename == NULL) + { + ret = SSL_ERROR_INVALID_KEY; + goto error; + } + + ssl_obj = (SSLObjLoader *)calloc(1, sizeof(SSLObjLoader)); + ssl_obj->len = get_file(filename, &ssl_obj->buf); + if (ssl_obj->len <= 0) + { + ret = SSL_ERROR_INVALID_KEY; + goto error; + } + + /* is the file a PEM file? */ + if (strstr((char *)ssl_obj->buf, begin) != NULL) + { +#ifdef CONFIG_SSL_HAS_PEM + ret = ssl_obj_PEM_load(ssl_ctx, obj_type, ssl_obj, password); +#else + puts(unsupported_str); + ret = SSL_ERROR_NOT_SUPPORTED; +#endif + } + else + ret = do_obj(ssl_ctx, obj_type, ssl_obj, password); + +error: + ssl_obj_free(ssl_obj); + return ret; +#else + puts(unsupported_str); + return SSL_ERROR_NOT_SUPPORTED; +#endif /* CONFIG_SSL_SKELETON_MODE */ +} + +/* + * Transfer binary data into the object loader. + */ +EXP_FUNC int STDCALL ssl_obj_memory_load(SSL_CTX *ssl_ctx, int mem_type, + const uint8_t *data, int len, const char *password) +{ + int ret; + SSLObjLoader *ssl_obj; + + ssl_obj = (SSLObjLoader *)calloc(1, sizeof(SSLObjLoader)); + ssl_obj->buf = (uint8_t *)malloc(len); + memcpy(ssl_obj->buf, data, len); + ssl_obj->len = len; + ret = do_obj(ssl_ctx, mem_type, ssl_obj, password); + ssl_obj_free(ssl_obj); + return ret; +} + +/* + * Actually work out what we are doing + */ +static int do_obj(SSL_CTX *ssl_ctx, int obj_type, + SSLObjLoader *ssl_obj, const char *password) +{ + int ret = SSL_OK; + + switch (obj_type) + { + case SSL_OBJ_RSA_KEY: + ret = add_private_key(ssl_ctx, ssl_obj); + break; + + case SSL_OBJ_X509_CERT: + ret = add_cert(ssl_ctx, ssl_obj->buf, ssl_obj->len); + break; + +#ifdef CONFIG_SSL_CERT_VERIFICATION + case SSL_OBJ_X509_CACERT: + add_cert_auth(ssl_ctx, ssl_obj->buf, ssl_obj->len); + break; +#endif + +#ifdef CONFIG_SSL_USE_PKCS12 + case SSL_OBJ_PKCS8: + ret = pkcs8_decode(ssl_ctx, ssl_obj, password); + break; + + case SSL_OBJ_PKCS12: + ret = pkcs12_decode(ssl_ctx, ssl_obj, password); + break; +#endif + default: + puts(unsupported_str); + ret = SSL_ERROR_NOT_SUPPORTED; + break; + } + + return ret; +} + +/* + * Clean up our mess. + */ +void ssl_obj_free(SSLObjLoader *ssl_obj) +{ + if (ssl_obj) + { + free(ssl_obj->buf); + free(ssl_obj); + } +} + +/* + * Support for PEM encoded keys/certificates. + */ +#ifdef CONFIG_SSL_HAS_PEM + +#define NUM_PEM_TYPES 4 +#define IV_SIZE 16 +#define IS_RSA_PRIVATE_KEY 0 +#define IS_ENCRYPTED_PRIVATE_KEY 1 +#define IS_PRIVATE_KEY 2 +#define IS_CERTIFICATE 3 + +static const char * const begins[NUM_PEM_TYPES] = +{ + "-----BEGIN RSA PRIVATE KEY-----", + "-----BEGIN ENCRYPTED PRIVATE KEY-----", + "-----BEGIN PRIVATE KEY-----", + "-----BEGIN CERTIFICATE-----", +}; + +static const char * const ends[NUM_PEM_TYPES] = +{ + "-----END RSA PRIVATE KEY-----", + "-----END ENCRYPTED PRIVATE KEY-----", + "-----END PRIVATE KEY-----", + "-----END CERTIFICATE-----", +}; + +static const char * const aes_str[2] = +{ + "DEK-Info: AES-128-CBC,", + "DEK-Info: AES-256-CBC," +}; + +/** + * Take a base64 blob of data and decrypt it (using AES) into its + * proper ASN.1 form. + */ +static int pem_decrypt(const char *where, const char *end, + const char *password, SSLObjLoader *ssl_obj) +{ + int ret = -1; + int is_aes_256 = 0; + char *start = NULL; + uint8_t iv[IV_SIZE]; + int i, pem_size; + MD5_CTX md5_ctx; + AES_CTX aes_ctx; + uint8_t key[32]; /* AES256 size */ + + if (password == NULL || strlen(password) == 0) + { +#ifdef CONFIG_SSL_FULL_MODE + printf("Error: Need a password for this PEM file\n"); TTY_FLUSH(); +#endif + goto error; + } + + if ((start = strstr((const char *)where, aes_str[0]))) /* AES128? */ + { + start += strlen(aes_str[0]); + } + else if ((start = strstr((const char *)where, aes_str[1]))) /* AES256? */ + { + is_aes_256 = 1; + start += strlen(aes_str[1]); + } + else + { +#ifdef CONFIG_SSL_FULL_MODE + printf("Error: Unsupported password cipher\n"); TTY_FLUSH(); +#endif + goto error; + } + + /* convert from hex to binary - assumes uppercase hex */ + for (i = 0; i < IV_SIZE; i++) + { + char c = *start++ - '0'; + iv[i] = (c > 9 ? c + '0' - 'A' + 10 : c) << 4; + c = *start++ - '0'; + iv[i] += (c > 9 ? c + '0' - 'A' + 10 : c); + } + + while (*start == '\r' || *start == '\n') + start++; + + /* turn base64 into binary */ + pem_size = (int)(end-start); + if (base64_decode(start, pem_size, ssl_obj->buf, &ssl_obj->len) != 0) + goto error; + + /* work out the key */ + MD5_Init(&md5_ctx); + MD5_Update(&md5_ctx, (const uint8_t *)password, strlen(password)); + MD5_Update(&md5_ctx, iv, SALT_SIZE); + MD5_Final(key, &md5_ctx); + + if (is_aes_256) + { + MD5_Init(&md5_ctx); + MD5_Update(&md5_ctx, key, MD5_SIZE); + MD5_Update(&md5_ctx, (const uint8_t *)password, strlen(password)); + MD5_Update(&md5_ctx, iv, SALT_SIZE); + MD5_Final(&key[MD5_SIZE], &md5_ctx); + } + + /* decrypt using the key/iv */ + AES_set_key(&aes_ctx, key, iv, is_aes_256 ? AES_MODE_256 : AES_MODE_128); + AES_convert_key(&aes_ctx); + AES_cbc_decrypt(&aes_ctx, ssl_obj->buf, ssl_obj->buf, ssl_obj->len); + ret = 0; + +error: + return ret; +} + +/** + * Take a base64 blob of data and turn it into its proper ASN.1 form. + */ +static int new_pem_obj(SSL_CTX *ssl_ctx, int is_cacert, char *where, + int remain, const char *password) +{ + int ret = SSL_ERROR_BAD_CERTIFICATE; + SSLObjLoader *ssl_obj = NULL; + + while (remain > 0) + { + int i, pem_size, obj_type; + char *start = NULL, *end = NULL; + + for (i = 0; i < NUM_PEM_TYPES; i++) + { + if ((start = strstr(where, begins[i])) && + (end = strstr(where, ends[i]))) + { + remain -= (int)(end-where); + start += strlen(begins[i]); + pem_size = (int)(end-start); + + ssl_obj = (SSLObjLoader *)calloc(1, sizeof(SSLObjLoader)); + + /* 4/3 bigger than what we need but so what */ + ssl_obj->buf = (uint8_t *)calloc(1, pem_size); + ssl_obj->len = pem_size; + + if (i == IS_RSA_PRIVATE_KEY && + strstr(start, "Proc-Type:") && + strstr(start, "4,ENCRYPTED")) + { + /* check for encrypted PEM file */ + if (pem_decrypt(start, end, password, ssl_obj) < 0) + { + ret = SSL_ERROR_BAD_CERTIFICATE; + goto error; + } + } + else + { + ssl_obj->len = pem_size; + if (base64_decode(start, pem_size, + ssl_obj->buf, &ssl_obj->len) != 0) + { + ret = SSL_ERROR_BAD_CERTIFICATE; + goto error; + } + } + + switch (i) + { + case IS_RSA_PRIVATE_KEY: + obj_type = SSL_OBJ_RSA_KEY; + break; + + case IS_ENCRYPTED_PRIVATE_KEY: + case IS_PRIVATE_KEY: + obj_type = SSL_OBJ_PKCS8; + break; + + case IS_CERTIFICATE: + obj_type = is_cacert ? + SSL_OBJ_X509_CACERT : SSL_OBJ_X509_CERT; + break; + + default: + ret = SSL_ERROR_BAD_CERTIFICATE; + goto error; + } + + /* In a format we can now understand - so process it */ + if ((ret = do_obj(ssl_ctx, obj_type, ssl_obj, password))) + goto error; + + end += strlen(ends[i]); + remain -= strlen(ends[i]); + while (remain > 0 && (*end == '\r' || *end == '\n')) + { + end++; + remain--; + } + + where = end; + break; + } + } + + ssl_obj_free(ssl_obj); + ssl_obj = NULL; + if (start == NULL) + break; + } +error: + ssl_obj_free(ssl_obj); + return ret; +} + +/* + * Load a file into memory that is in ASCII PEM format. + */ +static int ssl_obj_PEM_load(SSL_CTX *ssl_ctx, int obj_type, + SSLObjLoader *ssl_obj, const char *password) +{ + char *start; + + /* add a null terminator */ + ssl_obj->len++; + ssl_obj->buf = (uint8_t *)realloc(ssl_obj->buf, ssl_obj->len); + ssl_obj->buf[ssl_obj->len-1] = 0; + start = (char *)ssl_obj->buf; + return new_pem_obj(ssl_ctx, obj_type == SSL_OBJ_X509_CACERT, + start, ssl_obj->len, password); +} +#endif /* CONFIG_SSL_HAS_PEM */ + +/** + * Load the key/certificates in memory depending on compile-time and user + * options. + */ +int load_key_certs(SSL_CTX *ssl_ctx) +{ + int ret = SSL_OK; + uint32_t options = ssl_ctx->options; +#ifdef CONFIG_SSL_GENERATE_X509_CERT + uint8_t *cert_data = NULL; + int cert_size; + static const char *dn[] = + { + CONFIG_SSL_X509_COMMON_NAME, + CONFIG_SSL_X509_ORGANIZATION_NAME, + CONFIG_SSL_X509_ORGANIZATION_UNIT_NAME + }; +#endif + + /* do the private key first */ + if (strlen(CONFIG_SSL_PRIVATE_KEY_LOCATION) > 0) + { + if ((ret = ssl_obj_load(ssl_ctx, SSL_OBJ_RSA_KEY, + CONFIG_SSL_PRIVATE_KEY_LOCATION, + CONFIG_SSL_PRIVATE_KEY_PASSWORD)) < 0) + goto error; + } + else if (!(options & SSL_NO_DEFAULT_KEY)) + { +#if defined(CONFIG_SSL_USE_DEFAULT_KEY) || defined(CONFIG_SSL_SKELETON_MODE) + static const /* saves a few more bytes */ +#include "private_key.h" + + ssl_obj_memory_load(ssl_ctx, SSL_OBJ_RSA_KEY, default_private_key, + default_private_key_len, NULL); +#endif + } + + /* now load the certificate */ +#ifdef CONFIG_SSL_GENERATE_X509_CERT + if ((cert_size = ssl_x509_create(ssl_ctx, 0, dn, &cert_data)) < 0) + { + ret = cert_size; + goto error; + } + + ssl_obj_memory_load(ssl_ctx, SSL_OBJ_X509_CERT, cert_data, cert_size, NULL); + free(cert_data); +#else + if (strlen(CONFIG_SSL_X509_CERT_LOCATION)) + { + if ((ret = ssl_obj_load(ssl_ctx, SSL_OBJ_X509_CERT, + CONFIG_SSL_X509_CERT_LOCATION, NULL)) < 0) + goto error; + } + else if (!(options & SSL_NO_DEFAULT_KEY)) + { +#if defined(CONFIG_SSL_USE_DEFAULT_KEY) || defined(CONFIG_SSL_SKELETON_MODE) + static const /* saves a few bytes and RAM */ +#include "cert.h" + ssl_obj_memory_load(ssl_ctx, SSL_OBJ_X509_CERT, + default_certificate, default_certificate_len, NULL); +#endif + } +#endif + +error: +#ifdef CONFIG_SSL_FULL_MODE + if (ret) + { + printf("Error: Certificate or key not loaded\n"); TTY_FLUSH(); + } +#endif + + return ret; + +} -- cgit v1.2.3