From fe6fa5c5a90206e28c8edd2c4dec32ccaa84c709 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?J=C3=B6rg=20Frings-F=C3=BCrst?= Date: Wed, 10 Sep 2014 10:44:39 +0200 Subject: edit man pages --- debian/argyll-doc.doc-base | 4 +- debian/argyll-doc.docs | 4 +- debian/changelog | 22 ++-- debian/copyright | 52 ++++---- debian/man/applycal.1 | 41 +------ debian/man/average.1 | 33 +----- debian/man/cb2ti3.1 | 26 +--- debian/man/cctiff.1 | 82 +------------ debian/man/ccxxmake.1 | 96 +-------------- debian/man/chartread.1 | 99 +--------------- debian/man/collink.1 | 254 +--------------------------------------- debian/man/colprof.1 | 195 +----------------------------- debian/man/colverifiy.1 | 129 -------------------- debian/man/colverify.1 | 71 +---------- debian/man/dispcal.1 | 161 +------------------------ debian/man/dispread.1 | 108 +---------------- debian/man/dispwin.1 | 86 +------------- debian/man/extracticc.1 | 17 +-- debian/man/extractttag.1 | 23 +--- debian/man/fakeCMY.1 | 26 +--- debian/man/fakeread.1 | 99 +--------------- debian/man/greytiff.1 | 21 +--- debian/man/iccdump.1 | 24 +--- debian/man/iccgamut.1 | 102 +--------------- debian/man/icclu.1 | 37 +----- debian/man/illumread.1 | 44 +------ debian/man/invprofcheck.1 | 48 +------- debian/man/kodak2ti3.1 | 27 +---- debian/man/mppcheck.1 | 32 +---- debian/man/mpplu.1 | 60 +--------- debian/man/mppprof.1 | 33 +----- debian/man/oeminst.1 | 31 +---- debian/man/printcal.1 | 86 +------------- debian/man/printtarg.1 | 134 +-------------------- debian/man/profcheck.1 | 62 +--------- debian/man/refine.1 | 60 +--------- debian/man/revfix.1 | 50 +------- debian/man/scanin.1 | 125 ++------------------ debian/man/spec2cie.1 | 45 +------ debian/man/specplot.1 | 29 +---- debian/man/splitti3.1 | 34 +----- debian/man/spotread.1 | 126 +------------------- debian/man/synthcal.1 | 48 +------- debian/man/synthread.1 | 48 +------- debian/man/targen.1 | 117 +----------------- debian/man/tiffgamut.1 | 91 +------------- debian/man/timage.1 | 34 +----- debian/man/txt2ti3.1 | 36 +----- debian/man/viewgam.1 | 45 +------ debian/man/xicclu.1 | 165 +------------------------- debian/patches/15_jam.patch | 57 +++------ debian/patches/15_jam.patch.org | 96 +++++++++++++++ debian/rules | 35 +++--- 53 files changed, 393 insertions(+), 3217 deletions(-) delete mode 100644 debian/man/colverifiy.1 create mode 100644 debian/patches/15_jam.patch.org (limited to 'debian') diff --git a/debian/argyll-doc.doc-base b/debian/argyll-doc.doc-base index 962b063..b4f3f54 100644 --- a/debian/argyll-doc.doc-base +++ b/debian/argyll-doc.doc-base @@ -3,5 +3,5 @@ Title: Argyll Documentation Section: Graphics Format: HTML -Index: /usr/share/doc/argyll-doc/ArgyllDoc.html -Files: /usr/share/doc/argyll-doc/*.html +Index: /usr/share/doc/argyll-doc/html/ArgyllDoc.html +Files: /usr/share/doc/argyll-doc/html/*.html diff --git a/debian/argyll-doc.docs b/debian/argyll-doc.docs index 30d29de..aba2a6e 100644 --- a/debian/argyll-doc.docs +++ b/debian/argyll-doc.docs @@ -1 +1,3 @@ -doc/* +doc/* +Readme.txt +debian/README.Debian diff --git a/debian/changelog b/debian/changelog index d99cb72..4f95acd 100644 --- a/debian/changelog +++ b/debian/changelog @@ -1,4 +1,4 @@ -argyll (1.6.3-1) UNRELEASED; urgency=medium +argyll (1.6.3-1) unstable; urgency=medium * New Maintainer (Closes: #720178). * New upstream release (Closes: #742658). @@ -6,18 +6,19 @@ argyll (1.6.3-1) UNRELEASED; urgency=medium - Add get-orig-source. - Remove useless --with quilt from dh $@ - Enable hardening=+all + - Remove section for not included spyder2 firmware. - Rewrite for use of upstream build system. * debian/control: - Set myself as maintainer. - Update Build-Depends: - + Add dh-autoreconf for update Build Environment (Closes: #727517). + + Remove autoconf and automake | automaken - For previously not existing Vcs + Create a new git repository on alioth. - + Add the Fields Vcs-Browser and Vcs-Git. + + Add the fields Vcs-Browser and Vcs-Git. - Change Priority from optional to extra. - Remove useless packages: + icc-utils - Now in argyll. Only dummy package. + Now in argyll. Now only dummy package. + libicc2 & libicc-dev Useless. Only linked to argyll & icc-utils. + libimdi0 & libimdi-dev @@ -25,10 +26,15 @@ argyll (1.6.3-1) UNRELEASED; urgency=medium * Add debian/source/options: - Set compression to xz & compression-level to 9 to save space. * debian/copyright: - - Add myself as Maintainer to /debian/* - - Reorder entries - - -- Jörg Frings-Fürst Mon, 01 Sep 2014 14:53:18 +0200 + - Rewrite into DEP-5 format. + - Add myself to the list of authors for debian/*. + - Add missing licenses and authors. + * debian/*.1 + - Move to debian/man/*.1. + * debian/man/* + - Rewrite the help2man generated man pages (Closes: #670857) + + -- Jörg Frings-Fürst Sun, 07 Sep 2014 14:50:46 +0200 argyll (1.5.1-8) unstable; urgency=medium diff --git a/debian/copyright b/debian/copyright index 18352f9..37ee3d6 100644 --- a/debian/copyright +++ b/debian/copyright @@ -7,11 +7,10 @@ Files: * Copyright: 1995-2010 Graeme W. Gill License: AGPL-3 -Files: - icc/* - cgats/* - jcnf/* - ucmm/* +Files: icc/* + cgats/* + jcnf/* + ucmm/* Copyright: 1995-2011 Graeme W. Gill License: Expat @@ -39,7 +38,7 @@ License: Expat Files: usb/driver/* Copyright: 2002-2005 Stephan Meyer -License: GPL-2 & LGPL-2 +License: GPL-2 and LGPL-2 The library (DLL) is distributed under the terms of the GNU Lesser General Public License (LGPL). . @@ -64,21 +63,20 @@ Files: spectro/* Copyright: 1996-2011 Graeme W. Gill License: GPL-2+ -Files: - spectro/dispcal.c - spectro/dispsup.c - spectro/dispsup.h - spectro/dispwin.c - spectro/dispwin.h - spectro/average.c - spectro/synthcal.c - spectro/synthread.c - spectro/ccxxmake.c - spectro/fakeread.c - spectro/License.txt - spectro/chartread.c - spectro/dispread.c - spectro/illumread.c +Files: spectro/dispcal.c + spectro/dispsup.c + spectro/dispsup.h + spectro/dispwin.c + spectro/dispwin.h + spectro/average.c + spectro/synthcal.c + spectro/synthread.c + spectro/ccxxmake.c + spectro/fakeread.c + spectro/License.txt + spectro/chartread.c + spectro/dispread.c + spectro/illumread.c Copyright: 1996-2007 Graeme W. Gill License: AGPL-3 @@ -128,9 +126,8 @@ Files: tiff/contrib/ras/* Copyright: 1990 Sun Microsystems, Inc. License: Expat -Files: - tiff/libtiff/mkg2states.h - tiff/libtiff/tif_fax3.* +Files: tiff/libtiff/mkg2states.h + tiff/libtiff/tif_fax3.* Copyright: 1991-1997 Sam Leffler 1991-1997 Silicon Graphics, Inc. 1990-1995 Frank D. Cringle @@ -177,10 +174,9 @@ Files: tiff/tools/tiff2pdf.c Copyright: 2003 Ross Finlayson License: Expat -Files: - tiff/tools/bmp2tiff.c - tiff/tools/raw2tiff.c - tiff/tools/tiffgt.c +Files: tiff/tools/bmp2tiff.c + tiff/tools/raw2tiff.c + tiff/tools/tiffgt.c Copyright: 2002-2004, Andrey Kiselev License: Expat diff --git a/debian/man/applycal.1 b/debian/man/applycal.1 index c512245..eb2f902 100644 --- a/debian/man/applycal.1 +++ b/debian/man/applycal.1 @@ -1,14 +1,12 @@ .\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. -.TH APPLY "1" "September 2014" "Apply device calibration to an ICC profile, Version 1.6.3" "User Commands" +.TH APPLY "1" "September 2014" "applycal" "User Commands" .SH NAME Apply \- Apply device calibration to an ICC profile. .SH DESCRIPTION -Apply device calibration to an ICC profile, Version 1.6.3 -Author: Graeme W. Gill, licensed under the AGPL Version 3 -.IP -Diagnostic: Too few arguments -.PP -usage: applycal [\-options] [calfile.cal] inprof.icc [outprof.icc] +Apply device calibration to an ICC profile +.SH SYNOPSIS +.B applycal +.RB [\-options] [calfile.cal] inprof.icc [outprof.icc] .TP \fB\-v\fR Verbose mode @@ -29,31 +27,4 @@ inprof.icc ICC profile to read .TP outprof.icc -modified ICC profile to write -.PP -Author: Graeme W. Gill, licensed under the AGPL Version 3 -.IP -Diagnostic: Too few arguments -.PP -usage: applycal [\-options] [calfile.cal] inprof.icc [outprof.icc] -.TP -\fB\-v\fR -Verbose mode -.TP -\fB\-a\fR -Apply or re\-apply calibration (default) -.TP -\fB\-u\fR -Remove calibration -.TP -\fB\-c\fR -Check calibration -.TP -calfile.cal -Calibration file to apply -.TP -inprof.icc -ICC profile to read -.TP -outprof.icc -modified ICC profile to write +modified ICC profile to write \ No newline at end of file diff --git a/debian/man/average.1 b/debian/man/average.1 index 73fe678..ae80f1f 100644 --- a/debian/man/average.1 +++ b/debian/man/average.1 @@ -1,37 +1,14 @@ .\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. -.TH AVERAGE "1" "September 2014" "Average or merge values in .ti3 like files, Version 1.6.3" "User Commands" +.TH AVERAGE "1" "September 2014" "average" "User Commands" .SH NAME Average \- Average or merge values in .ti3 like files. .SH DESCRIPTION -Average or merge values in .ti3 like files, Version 1.6.3 +Average or merge values in .ti3 like files .IP Diagnostic: Too few arguments (1, minimum is 2) -.PP -Author: Graeme W. Gill, licensed under the AGPL Version 3 -usage: average [\-options] input1.ti3 input2.ti3 ... output.ti3 -.TP -\fB\-v\fR -Verbose -.TP -\fB\-m\fR -Merge rather than average -.TP -input1.ti3 -First input file -.TP -input2.ti3 -Second input file -.TP -\&... -etc. -.TP -output.ti3 -Resulting averaged or merged output file -.IP -Diagnostic: Too few arguments (1, minimum is 2) -.PP -Author: Graeme W. Gill, licensed under the AGPL Version 3 -usage: average [\-options] input1.ti3 input2.ti3 ... output.ti3 +.SH SYNOPSIS +.B average +.RB [\-options]\ \input1.ti3\ \input2.ti3 ... output.ti3 .TP \fB\-v\fR Verbose diff --git a/debian/man/cb2ti3.1 b/debian/man/cb2ti3.1 index 16681cb..ddf3a9d 100644 --- a/debian/man/cb2ti3.1 +++ b/debian/man/cb2ti3.1 @@ -1,11 +1,12 @@ .\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. -.TH CONVERT "1" "September 2014" "Convert Colorblind raw device profile data to Argyll data, Version 1.6.3" "User Commands" +.TH CONVERT "1" "September 2014" "cb2ti3" "User Commands" .SH NAME Convert \- Convert Colorblind raw device profile data to Argyll data. .SH DESCRIPTION -Convert Colorblind raw device profile data to Argyll data, Version 1.6.3 -Author: Graeme W. Gill, licensed under the AGPL Version 3 -usage: cb2ti3 [\-v] [\-l limit] infile outfile +Convert Colorblind raw device profile data to Argyll data +.SH SYNOPSIS +.B cb2ti3 +.RB [\-v] [\-l limit] infile outfile .TP \fB\-v\fR Verbose mode @@ -17,19 +18,4 @@ infile Base name for input.CMY and input.nCIE file .TP outfile -Base name for output.ti3 file -.PP -Author: Graeme W. Gill, licensed under the AGPL Version 3 -usage: cb2ti3 [\-v] [\-l limit] infile outfile -.TP -\fB\-v\fR -Verbose mode -.TP -\fB\-l\fR limit -Set inklimit in .ti3 file -.TP -infile -Base name for input.CMY and input.nCIE file -.TP -outfile -Base name for output.ti3 file +Base name for output.ti3 file \ No newline at end of file diff --git a/debian/man/cctiff.1 b/debian/man/cctiff.1 index fd017d0..cb23e31 100644 --- a/debian/man/cctiff.1 +++ b/debian/man/cctiff.1 @@ -1,84 +1,12 @@ .\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. -.TH COLOR "1" "September 2014" "Color Correct a TIFF or JPEG file using any sequence of ICC profiles or Calibrations, V1.6.3" "User Commands" +.TH COLOR "1" "September 2014" "cctiff" "User Commands" .SH NAME Color \- Color Correct a TIFF file using any sequence of ICC profiles or Calibrations. .SH DESCRIPTION -Color Correct a TIFF or JPEG file using any sequence of ICC profiles or Calibrations, V1.6.3 -Author: Graeme W. Gill, licensed under the AGPL Version 3 -.IP -Diagnostic: Unknown flag '\-' -.PP -usage: cctiff [\-options] { [\-i intent] profile.icc | calbrtn.cal ...} infile.tif/jpg outfile.tif/jpg -.TP -\fB\-v\fR -Verbose. -.TP -\fB\-c\fR -Combine linearisation curves into one transform. -.TP -\fB\-p\fR -Use slow precise correction. -.TP -\fB\-k\fR -Check fast result against precise, and report. -.TP -\fB\-r\fR n -Override the default CLUT resolution -.TP -\fB\-t\fR n -Choose output encoding from 1..n -.TP -\fB\-f\fR [T|J] -Set output format to Tiff or Jpeg (Default is same as input) -.TP -\fB\-q\fR quality -Set JPEG quality 1..100 (Default 80) -.TP -\fB\-a\fR -Read and Write planes > 4 as alpha planes -.TP -\fB\-I\fR -Ignore any file or profile colorspace mismatches -.TP -\fB\-D\fR -Don't append or set the output TIFF or JPEG description -.TP -\fB\-e\fR profile.[icc | tiff | jpg] -Optionally embed a profile in the destination TIFF or JPEG file. -.IP -Then for each profile in sequence: -.TP -\fB\-i\fR intent -p = perceptual, r = relative colorimetric, -s = saturation, a = absolute colorimetric -.TP -\fB\-o\fR order -n = normal (priority: lut > matrix > monochrome) -r = reverse (priority: monochrome > matrix > lut) -.TP -profile.[icc | tiff] -Device, Link or Abstract profile -.IP -( May be embedded profile in TIFF/JPEG file) -.IP -or each calibration file in sequence: -.TP -\fB\-d\fR dir -f = forward cal. (default), b = backwards cal. -.TP -calbrtn.cal -Device calibration file. -.TP -infile.tif/jpg -Input TIFF/JPEG file in appropriate color space -.IP -outfile.tif/jpg Output TIFF/JPEG file -.PP -Author: Graeme W. Gill, licensed under the AGPL Version 3 -.IP -Diagnostic: Unknown flag '\-' -.PP -usage: cctiff [\-options] { [\-i intent] profile.icc | calbrtn.cal ...} infile.tif/jpg outfile.tif/jpg +Color Correct a TIFF or JPEG file using any sequence of ICC profiles or Calibrations +.SH SYNOPSIS +.B cctiff +.RB [\-options]\ { [\-i intent]\ profile.icc\ |\ calbrtn.cal\ ...}\ infile.(tif|jpg)\ outfile.(tif|jpg) .TP \fB\-v\fR Verbose. diff --git a/debian/man/ccxxmake.1 b/debian/man/ccxxmake.1 index 0bd7df7..337db92 100644 --- a/debian/man/ccxxmake.1 +++ b/debian/man/ccxxmake.1 @@ -1,98 +1,12 @@ .\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. -.TH CREATE "1" "September 2014" "Create CCMX or CCSS, Version 1.6.3" "User Commands" +.TH CREATE "1" "September 2014" "ccmxmake" "User Commands" .SH NAME Create \- Create CCMX or CCSS. .SH DESCRIPTION -Create CCMX or CCSS, Version 1.6.3 -Author: Graeme W. Gill, licensed under the AGPL Version 3 -Diagnostic: Flag '\-\-' not recognised -usage: ccmxmake [\-options] output.ccmx -.TP -\fB\-v\fR -Verbose mode -.TP -\fB\-S\fR -Create CCSS rather than CCMX -.HP -\fB\-f\fR file1.ti3[,file2.ti3] Create from one or two .ti3 files rather than measure. -.TP -\fB\-display\fR displayname -Choose X11 display name -.TP -\fB\-d\fR n[,m] -Choose the display n from the following list (default 1) -Optionally choose different display m for VideoLUT access -.IP -1 name = ':0.0' -1 = 'Screen 1, Output DVI\-I\-1 at 0, 0, width 1920, height 1080' -.TP -\fB\-dweb[\fR:port] -Display via a web server at port (default 8080) -.TP -\fB\-p\fR -Use telephoto mode (ie. for a projector) (if available) -.TP -\fB\-P\fR ho,vo,ss[,vs] -Position test window and scale it -ho,vi: 0.0 = left/top, 0.5 = center, 1.0 = right/bottom etc. -ss: 0.5 = half, 1.0 = normal, 2.0 = double etc. -.TP -\fB\-F\fR -Fill whole screen with black background -.TP -\fB\-n\fR -Don't set override redirect on test window -.TP -\fB\-N\fR -Disable initial calibration of instrument if possible -.TP -\fB\-H\fR -Use high resolution spectrum mode (if available) -.TP -\fB\-C\fR "command" -Invoke shell "command" each time a color is set -.TP -\fB\-o\fR observ -Choose CIE Observer for CCMX spectrometer data: -1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2 -.TP -\fB\-s\fR steps -Override default patch sequence combination steps (default 1) -.TP -\fB\-W\fR n|h|x -Override serial port flow control: n = none, h = HW, x = Xon/Xoff -.TP -\fB\-D\fR [level] -Print debug diagnostics to stderr -.TP -\fB\-E\fR desciption -Override the default overall description -.TP -\fB\-I\fR displayname -Set display make and model description -.TP -\fB\-T\fR displaytech -Set display technology description (ie. CRT, LCD etc.) -.TP -\fB\-U\fR c -Set UI selection character(s) -.TP -\fB\-Y\fR r|n -Set or override refresh/non\-refresh display type -.TP -\fB\-Y\fR R:rate -Override measured refresh rate with rate Hz -.TP -\fB\-Y\fR A -Use non\-adaptive integration time mode (if available). -.IP -correction.ccmx | calibration.ccss -.IP -File to save result to -.PP -Author: Graeme W. Gill, licensed under the AGPL Version 3 -Diagnostic: Flag '\-\-' not recognised -usage: ccmxmake [\-options] output.ccmx +Create CCMX or CCSS +.SH SYNOPSIS +.B ccmxmake +.RB [\-options]\ output.ccmx .TP \fB\-v\fR Verbose mode diff --git a/debian/man/chartread.1 b/debian/man/chartread.1 index 1d3d21c..1d8285e 100644 --- a/debian/man/chartread.1 +++ b/debian/man/chartread.1 @@ -1,101 +1,12 @@ .\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. -.TH READ "1" "September 2014" "Read Target Test Chart, Version 1.6.3" "User Commands" +.TH READ "1" "September 2014" "chartread" "User Commands" .SH NAME Read \- Read Target Test Chart. .SH DESCRIPTION -Read Target Test Chart, Version 1.6.3 -Author: Graeme W. Gill, licensed under the AGPL Version 3 -usage: chartread [\-options] outfile -.TP -\fB\-v\fR -Verbose mode -.TP -\fB\-c\fR listno -Set communication port from the following list (default 1) -.IP -** No ports found ** -.TP -\fB\-t\fR -Use transmission measurement mode -.TP -\fB\-d\fR -Use display measurement mode (white Y relative results) -.TP -\fB\-e\fR -Emissive for transparency on a light box -.TP -\fB\-p\fR -Measure patch by patch rather than strip -.TP -\fB\-x\fR [lx] -Take external values, either L*a*b* (\fB\-xl\fR) or XYZ (\fB\-xx\fR). -.TP -\fB\-n\fR -Don't save spectral information (default saves spectral) -.TP -\fB\-l\fR -Save CIE as D50 L*a*b* rather than XYZ -.TP -\fB\-L\fR -Save CIE as D50 L*a*b* as well as XYZ -.TP -\fB\-r\fR -Resume reading partly read chart -.TP -\fB\-I\fR file.cal -Override calibration info from .ti2 in resulting .ti3 -.TP -\fB\-F\fR filter -Set filter configuration (if aplicable): -.TP -n -None -.TP -p -Polarising filter -.TP -6 -D65 -.TP -u -U.V. Cut -.TP -\fB\-N\fR -Disable initial calibration of instrument if possible -.TP -\fB\-B\fR -Disable auto bi\-directional strip recognition -.TP -\fB\-H\fR -Use high resolution spectrum mode (if available) -.TP -\fB\-X\fR file.ccmx -Apply Colorimeter Correction Matrix -.TP -\fB\-X\fR file.ccss -Use Colorimeter Calibration Spectral Samples for calibration -.TP -\fB\-Q\fR observ -Choose CIE Observer for CCSS instrument: -1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2 -.TP -\fB\-T\fR ratio -Modify strip patch consistency tolerance by ratio -.TP -\fB\-S\fR -Suppress wrong strip & unexpected value warnings -.TP -\fB\-W\fR n|h|x -Override serial port flow control: n = none, h = HW, x = Xon/Xoff -.TP -\fB\-D\fR [level] -Print debug diagnostics to stderr -.TP -outfile -Base name for input[ti2]/output[ti3] file -.PP -Author: Graeme W. Gill, licensed under the AGPL Version 3 -usage: chartread [\-options] outfile +Read Target Test Chart +.SH SYNOPSIS +.B chartread +.RB [\-options]\ outfile .TP \fB\-v\fR Verbose mode diff --git a/debian/man/collink.1 b/debian/man/collink.1 index 5a933dd..35d6c02 100644 --- a/debian/man/collink.1 +++ b/debian/man/collink.1 @@ -1,256 +1,14 @@ .\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. -.TH LINK "1" "September 2014" "Link ICC profiles, Version 1.6.3" "User Commands" +.TH LINK "1" "September 2014" "collink" "User Commands" .SH NAME Link \- Link ICC profiles. .SH DESCRIPTION -Link ICC profiles, Version 1.6.3 -Author: Graeme W. Gill, licensed under the AGPL Version 3 -.IP -Diagnostic: Too few arguments, got 1 expect at least 3 -.PP -usage: collink [options] srcprofile dstprofile linkedprofile -.TP -\fB\-v\fR -Verbose -.HP -\fB\-A\fR manufacturer Manufacturer description string -.TP -\fB\-M\fR model -Model description string -.TP -\fB\-D\fR description -Profile Description string (Default "inoutfile") -.TP -\fB\-C\fR copyright -Copyright string -.TP -\fB\-V\fR -Verify existing profile, rather than link -.TP -\fB\-q\fR lmhu -Quality \- Low, Medium (def), High, Ultra -.TP -\fB\-r\fR res -Override clut res. set by \fB\-q\fR -.TP -\fB\-n\fR -Don't preserve device linearization curves in result -.TP -\fB\-f\fR -Special :\- Force neutral colors to be K only output -.TP -\fB\-fk\fR -Special :\- Force K only neutral colors to be K only output -.TP -\fB\-F\fR -Special :\- Force all colors to be K only output -.TP -\fB\-fcmy\fR -Special :\- Force 100% C,M or Y only to stay pure -.TP -\fB\-p\fR absprof -Include abstract profile in link -.TP -\fB\-a\fR file.cal -Apply calibration curves to link output and append linear -.TP -\fB\-H\fR file.cal -Append calibration curves to 3dlut -.TP -\fB\-s\fR -Simple Mode (default) -.TP -\fB\-g\fR [src.gam] -Gamut Mapping Mode [optional source image gamut] -.TP -\fB\-G\fR [src.gam] -Gamut Mapping Mode using inverse outprofile A2B -.IP -Simple Mode Options: -\fB\-i\fR in_intent p = perceptual, r = relative colorimetric, -.IP -s = saturation, a = absolute colorimetric -.TP -\fB\-o\fR out_intent -p = perceptual, r = relative colorimetric, -s = saturation, a = absolute colorimetric -.TP -Gamut Mapping -Mode Options: -.TP -\fB\-i\fR intent -set linking intent from the following choice: -.IP -a \- Absolute Colorimetric (in Jab) [ICC Absolute Colorimetric] -.IP -aw \- Absolute Colorimetric (in Jab) with scaling to fit white point -aa \- Absolute Appearance -.IP -r \- White Point Matched Appearance [ICC Relative Colorimetric] -.IP -la \- Luminance axis matched Appearance -.IP -p \- Perceptual (Preferred) (Default) [ICC Perceptual] -.IP -pa \- Perceptual Apperance -ms \- Saturation -.IP -s \- Enhanced Saturation [ICC Saturation] -.IP -al \- Absolute Colorimetric (Lab) -rl \- White Point Matched Colorimetric (Lab) -.TP -\fB\-w\fR [J,a,b] -Use forced whitepoint hack [optional target point] -.TP -\fB\-c\fR viewcond -set source viewing conditions for CIECAM02, -either an enumerated choice, or a parameter -.TP -\fB\-d\fR viewcond -set destination viewing conditions for CIECAM02, -either an enumerated choice, or parameter:value changes -.IP -pp \- Practical Reflection Print (ISO\-3664 P2) -pe \- Print evaluation environment (CIE 116\-1995) -pc \- Critical print evaluation environment (ISO\-3664 P1) -mt \- Monitor in typical work environment -mb \- Bright monitor in bright work environment -md \- Monitor in darkened work environment -jm \- Projector in dim environment -jd \- Projector in dark environment -tv \- Television/Film Studio -.IP -pcd \- Photo CD \- original scene outdoors -.IP -ob \- Original scene \- Bright Outdoors -cx \- Cut Sheet Transparencies on a viewing box -.TP -s:surround -n = auto, a = average, m = dim, d = dark, -c = transparency (default average) -.TP -w:X:Y:Z -Adapted white point as XYZ (default media white) -.TP -w:x:y -Adapted white point as x, y -.TP -a:adaptation -Adaptation luminance in cd.m^2 (default 50.0) -.TP -b:background -Background % of image luminance (default 20) -.TP -l:imagewhite -Image white in cd.m^2 if surround = auto (default 250) -.TP -f:flare -Flare light % of image luminance (default 0) -.TP -g:glare -Flare light % of ambient (default 1) -.TP -g:X:Y:Z -Flare color as XYZ (default media white, Abs: D50) -.TP -g:x:y -Flare color as x, y -.TP -\fB\-t\fR tlimit -set source total ink limit, 0 \- 400% (estimate by default) -.TP -\fB\-T\fR klimit -set source black ink limit, 0 \- 100% (estimate by default) -.IP -Inverse outprofile A2B Options: -\fB\-k\fR tezhxr CMYK Black generation -.IP -t = transfer K from source to destination, e = retain K of destination B2A table -z = zero K, h = 0.5 K, x = maximum K, r = ramp K (default) -.HP -\fB\-k\fR p stle stpo enpo enle shape -.IP -p = black target generation curve parameters -.HP -\fB\-k\fR q stle0 stpo0 enpo0 enle0 shape0 stle2 stpo2 enpo2 enle2 shape2 -.IP -q = transfer source K to dual curve limits -.TP -\fB\-K\fR parameters -Same as \fB\-k\fR, but target is K locus rather than K value itself -.TP -\fB\-l\fR tlimit -set destination total ink limit, 0 \- 400% (estimate by default) -.TP -\fB\-L\fR klimit -set destination black ink limit, 0 \- 100% (estimate by default) -.TP -\fB\-3\fR flag -Create "3DLut" output file as well as devlink -.TP -e -eeColor .txt file -.TP -m -MadVR .3dlut file -.TP -\fB\-I\fR b -Apply BT.1886\-like mapping with effective gamma 2.2 to input -.TP -\fB\-I\fR b:g.g -Apply BT.1886\-like mapping with effective gamma g.g to input -.TP -\fB\-I\fR B -Apply BT.1886 mapping with technical gamma 2.4 to input -.TP -\fB\-I\fR B:g.g -Apply BT.1886 mapping with technical gamma g.g to input -.TP -\fB\-e\fR flag -Video encode input as: -.TP -\fB\-E\fR flag -Video encode output as: -.TP -n -normal 0..1 full range RGB levels (default) -.TP -t -(16\-235)/255 "TV" RGB levels -.TP -6 -Rec601 YCbCr SD (16\-235,240)/255 "TV" levels -.TP -7 -Rec709 1125/60Hz YCbCr HD (16\-235,240)/255 "TV" levels -.TP -5 -Rec709 1250/50Hz YCbCr HD (16\-235,240)/255 "TV" levels -.TP -2 -Rec2020 YCbCr UHD (16\-235,240)/255 "TV" levels -.TP -C -Rec2020 Constant Luminance YCbCr UHD (16\-235,240)/255 "TV" levels -.TP -x -xvYCC Rec601 YCbCr Rec709 Prims. SD (16\-235,240)/255 "TV" levels -.TP -X -xvYCC Rec709 YCbCr Rec709 Prims. HD (16\-235,240)/255 "TV" levels -.TP -\fB\-P\fR -Create gamut gammap.wrl diagostic -.PP -Author: Graeme W. Gill, licensed under the AGPL Version 3 -.IP -Diagnostic: Too few arguments, got 1 expect at least 3 -.PP -usage: collink [options] srcprofile dstprofile linkedprofile +Link ICC profiles +.SH SYNOPSIS +.B collink +.RB [options]\ srcprofile\ dstprofile\ linkedprofile .TP -\fB\-v\fR -Verbose +\fB\-v\fR Verbose .HP \fB\-A\fR manufacturer Manufacturer description string .TP diff --git a/debian/man/colprof.1 b/debian/man/colprof.1 index b9feb69..cf8b9b1 100644 --- a/debian/man/colprof.1 +++ b/debian/man/colprof.1 @@ -1,197 +1,12 @@ .\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. -.TH CREATE "1" "September 2014" "Create ICC profile, Version 1.6.3" "User Commands" +.TH CREATE "1" "September 2014" "colprof" "User Commands" .SH NAME Create \- Create ICC profile. .SH DESCRIPTION -Create ICC profile, Version 1.6.3 -Author: Graeme W. Gill, licensed under the AGPL Version 3 -.IP -Diagnostic: Unknown flag '\-' -.PP -usage: debian/tmp/usr/bin/colprof [\-options] inoutfile -.TP -\fB\-v\fR -Verbose mode -.HP -\fB\-A\fR manufacturer Manufacturer description string -.TP -\fB\-M\fR model -Model description string -.TP -\fB\-D\fR description -Profile Description string (Default "inoutfile") -.TP -\fB\-C\fR copyright -Copyright string -.TP -\fB\-Z\fR tmnb -Attributes: Transparency, Matte, Negative, BlackAndWhite -.TP -\fB\-Z\fR prsa -Default intent: Perceptual, Rel. Colorimetric, Saturation, Abs. Colorimetric -.TP -\fB\-q\fR lmhu -Quality \- Low, Medium (def), High, Ultra -.TP -\fB\-b\fR [lmhun] -Low quality B2A table \- or specific B2A quality or none for input device -.TP -\fB\-ni\fR -Don't create input (Device) shaper curves -.TP -\fB\-np\fR -Don't create input (Device) grid position curves -.TP -\fB\-no\fR -Don't create output (PCS) shaper curves -.TP -\fB\-nc\fR -Don't put the input .ti3 data in the profile -.TP -\fB\-k\fR zhxr -Black value target: z = zero K, -h = 0.5 K, x = max K, r = ramp K (def.) -.HP -\fB\-k\fR p stle stpo enpo enle shape -.IP -stle: K level at White 0.0 \- 1.0 -stpo: start point of transition Wh 0.0 \- Bk 1.0 -enpo: End point of transition Wh 0.0 \- Bk 1.0 -enle: K level at Black 0.0 \- 1.0 -shape: 1.0 = straight, 0.0\-1.0 concave, 1.0\-2.0 convex -.TP -\fB\-K\fR parameters -Same as \fB\-k\fR, but target is K locus rather than K value itself -.TP -\fB\-l\fR tlimit -override total ink limit, 0 \- 400% (default from .ti3) -.TP -\fB\-L\fR klimit -override black ink limit, 0 \- 100% (default from .ti3) -.TP -\fB\-a\fR lxXgsmGS -Algorithm type override -l = Lab cLUT (def.), x = XYZ cLUT, X = display XYZ cLUT + matrix -g = gamma+matrix, s = shaper+matrix, m = matrix only, -G = single gamma+matrix, S = single shaper+matrix -.TP -\fB\-u\fR -If input profile, auto scale WP to allow extrapolation -.TP -\fB\-uc\fR -If input profile, clip cLUT values above WP -.TP -\fB\-U\fR scale -If input profile, scale media white point by scale -.TP -\fB\-R\fR -Restrict white <= 1.0, black and primaries to be +ve -.TP -\fB\-V\fR demphasis -Degree of dark region cLUT grid emphasis 1.0\-4.0 (default 1.00 = none) -.TP -\fB\-f\fR [illum] -Use Fluorescent Whitening Agent compensation [opt. simulated inst. illum.: -.IP -M0, M1, M2, A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp] -.TP -\fB\-i\fR illum -Choose illuminant for computation of CIE XYZ from spectral data & FWA: -.IP -A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp -.TP -\fB\-o\fR observ -Choose CIE Observer for spectral data: -.IP -1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2 -.TP -\fB\-r\fR avgdev -Average deviation of device+instrument readings as a percentage (default 0.50%) -.TP -\fB\-s\fR src.icc -Apply gamut mapping to output profile perceptual B2A table for given source space -.TP -\fB\-S\fR src.icc -Apply gamut mapping to output profile perceptual and saturation B2A table -.TP -\fB\-nP\fR -Use colormetric source gamut to make output profile perceptual table -.TP -\fB\-nS\fR -Use colormetric source gamut to make output profile saturation table -.TP -\fB\-g\fR src.gam -Use source image gamut as well for output profile gamut mapping -.TP -\fB\-p\fR absprof,... -Incorporate abstract profile(s) into output tables -.TP -\fB\-t\fR intent -Override gamut mapping intent for output profile perceptual table: -.TP -\fB\-T\fR intent -Override gamut mapping intent for output profile saturation table: -.IP -a \- Absolute Colorimetric (in Jab) [ICC Absolute Colorimetric] -.IP -aw \- Absolute Colorimetric (in Jab) with scaling to fit white point -aa \- Absolute Appearance -.IP -r \- White Point Matched Appearance [ICC Relative Colorimetric] -.IP -la \- Luminance axis matched Appearance -.IP -p \- Perceptual (Preferred) (Default) [ICC Perceptual] -.IP -pa \- Perceptual Apperance -ms \- Saturation -.IP -s \- Enhanced Saturation [ICC Saturation] -.IP -al \- Absolute Colorimetric (Lab) -rl \- White Point Matched Colorimetric (Lab) -.TP -\fB\-c\fR viewcond -set input viewing conditions for output profile CIECAM02 gamut mapping, -.IP -either an enumerated choice, or a parameter -.TP -\fB\-d\fR viewcond -set output viewing conditions for output profile CIECAM02 gamut mapping -.IP -either an enumerated choice, or a parameter -Also sets out of gamut clipping CAM space. -either an enumerated choice, or a series of parameters:value changes -.IP -pp \- Practical Reflection Print (ISO\-3664 P2) -pe \- Print evaluation environment (CIE 116\-1995) -pc \- Critical print evaluation environment (ISO\-3664 P1) -mt \- Monitor in typical work environment -mb \- Bright monitor in bright work environment -md \- Monitor in darkened work environment -jm \- Projector in dim environment -jd \- Projector in dark environment -tv \- Television/Film Studio -.IP -pcd \- Photo CD \- original scene outdoors -.IP -ob \- Original scene \- Bright Outdoors -cx \- Cut Sheet Transparencies on a viewing box -.TP -\fB\-P\fR -Create gamut gammap_p.wrl and gammap_s.wrl diagostics -.TP -\fB\-O\fR outputfile -Override the default output filename. -.TP -inoutfile -Base name for input.ti3/output.icc file -.PP -Author: Graeme W. Gill, licensed under the AGPL Version 3 -.IP -Diagnostic: Unknown flag '\-' -.PP -usage: debian/tmp/usr/bin/colprof [\-options] inoutfile +Create ICC profile +.SH SYNOPSIS +.B colprof +.RB [\-options]\ inoutfile .TP \fB\-v\fR Verbose mode diff --git a/debian/man/colverifiy.1 b/debian/man/colverifiy.1 deleted file mode 100644 index e53707b..0000000 --- a/debian/man/colverifiy.1 +++ /dev/null @@ -1,129 +0,0 @@ -.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. -.TH VERIFY "1" "September 2014" "Verify CIE values, Version 1.6.3" "User Commands" -.SH NAME -Verify \- Verify CIE values. -.SH DESCRIPTION -Verify CIE values, Version 1.6.3 -Author: Graeme W. Gill, licensed under the AGPL Version 3 -usage: verify [\-options] target.ti3 measured.ti3 -.TP -\fB\-v\fR [n] -Verbose mode, n >= 2 print each value -.TP -\fB\-n\fR -Normalise each files reading to its white Y -.TP -\fB\-N\fR -Normalise each files reading to its white XYZ -.TP -\fB\-m\fR -Normalise each files reading to its white X+Y+Z -.TP -\fB\-D\fR -Use D50 100.0 as L*a*b* white reference -.TP -\fB\-c\fR -Show CIE94 delta E values -.TP -\fB\-k\fR -Show CIEDE2000 delta E values -.TP -\fB\-s\fR -Sort patch values by error -.TP -\fB\-w\fR -create VRML vector visualisation (measured.wrl) -.TP -\fB\-W\fR -create VRML marker visualisation (measured.wrl) -.TP -\fB\-x\fR -Use VRML axes -.TP -\fB\-f\fR [illum] -Use Fluorescent Whitening Agent compensation [opt. simulated inst. illum.: -.IP -M0, M1, M2, A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp] -.TP -\fB\-i\fR illum -Choose illuminant for computation of CIE XYZ from spectral data & FWA: -.IP -A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp -.TP -\fB\-o\fR observ -Choose CIE Observer for spectral data: -1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2 -.TP -\fB\-L\fR profile.icc -Skip any first file out of profile gamut patches -.TP -\fB\-X\fR file.ccmx -Apply Colorimeter Correction Matrix to second file -.TP -target.ti3 -Target (reference) PCS or spectral values. -.TP -measured.ti3 -Measured (actual) PCS or spectral values -.PP -Author: Graeme W. Gill, licensed under the AGPL Version 3 -usage: verify [\-options] target.ti3 measured.ti3 -.TP -\fB\-v\fR [n] -Verbose mode, n >= 2 print each value -.TP -\fB\-n\fR -Normalise each files reading to its white Y -.TP -\fB\-N\fR -Normalise each files reading to its white XYZ -.TP -\fB\-m\fR -Normalise each files reading to its white X+Y+Z -.TP -\fB\-D\fR -Use D50 100.0 as L*a*b* white reference -.TP -\fB\-c\fR -Show CIE94 delta E values -.TP -\fB\-k\fR -Show CIEDE2000 delta E values -.TP -\fB\-s\fR -Sort patch values by error -.TP -\fB\-w\fR -create VRML vector visualisation (measured.wrl) -.TP -\fB\-W\fR -create VRML marker visualisation (measured.wrl) -.TP -\fB\-x\fR -Use VRML axes -.TP -\fB\-f\fR [illum] -Use Fluorescent Whitening Agent compensation [opt. simulated inst. illum.: -.IP -M0, M1, M2, A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp] -.TP -\fB\-i\fR illum -Choose illuminant for computation of CIE XYZ from spectral data & FWA: -.IP -A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp -.TP -\fB\-o\fR observ -Choose CIE Observer for spectral data: -1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2 -.TP -\fB\-L\fR profile.icc -Skip any first file out of profile gamut patches -.TP -\fB\-X\fR file.ccmx -Apply Colorimeter Correction Matrix to second file -.TP -target.ti3 -Target (reference) PCS or spectral values. -.TP -measured.ti3 -Measured (actual) PCS or spectral values diff --git a/debian/man/colverify.1 b/debian/man/colverify.1 index e53707b..392d8f0 100644 --- a/debian/man/colverify.1 +++ b/debian/man/colverify.1 @@ -1,73 +1,12 @@ .\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. -.TH VERIFY "1" "September 2014" "Verify CIE values, Version 1.6.3" "User Commands" +.TH VERIFY "1" "September 2014" "verfiy" "User Commands" .SH NAME Verify \- Verify CIE values. .SH DESCRIPTION -Verify CIE values, Version 1.6.3 -Author: Graeme W. Gill, licensed under the AGPL Version 3 -usage: verify [\-options] target.ti3 measured.ti3 -.TP -\fB\-v\fR [n] -Verbose mode, n >= 2 print each value -.TP -\fB\-n\fR -Normalise each files reading to its white Y -.TP -\fB\-N\fR -Normalise each files reading to its white XYZ -.TP -\fB\-m\fR -Normalise each files reading to its white X+Y+Z -.TP -\fB\-D\fR -Use D50 100.0 as L*a*b* white reference -.TP -\fB\-c\fR -Show CIE94 delta E values -.TP -\fB\-k\fR -Show CIEDE2000 delta E values -.TP -\fB\-s\fR -Sort patch values by error -.TP -\fB\-w\fR -create VRML vector visualisation (measured.wrl) -.TP -\fB\-W\fR -create VRML marker visualisation (measured.wrl) -.TP -\fB\-x\fR -Use VRML axes -.TP -\fB\-f\fR [illum] -Use Fluorescent Whitening Agent compensation [opt. simulated inst. illum.: -.IP -M0, M1, M2, A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp] -.TP -\fB\-i\fR illum -Choose illuminant for computation of CIE XYZ from spectral data & FWA: -.IP -A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp -.TP -\fB\-o\fR observ -Choose CIE Observer for spectral data: -1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2 -.TP -\fB\-L\fR profile.icc -Skip any first file out of profile gamut patches -.TP -\fB\-X\fR file.ccmx -Apply Colorimeter Correction Matrix to second file -.TP -target.ti3 -Target (reference) PCS or spectral values. -.TP -measured.ti3 -Measured (actual) PCS or spectral values -.PP -Author: Graeme W. Gill, licensed under the AGPL Version 3 -usage: verify [\-options] target.ti3 measured.ti3 +Verify CIE values +.SH SYNOPSIS +.B verify +.RB [\-options]\ target.ti3\ measured.ti3 .TP \fB\-v\fR [n] Verbose mode, n >= 2 print each value diff --git a/debian/man/dispcal.1 b/debian/man/dispcal.1 index 1570b98..20e9442 100644 --- a/debian/man/dispcal.1 +++ b/debian/man/dispcal.1 @@ -1,163 +1,12 @@ .\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. -.TH CALIBRATE "1" "September 2014" "Calibrate a Display, Version 1.6.3" "User Commands" +.TH CALIBRATE "1" "September 2014" "dispcal" "User Commands" .SH NAME Calibrate \- Calibrate a Display. .SH DESCRIPTION -Calibrate a Display, Version 1.6.3 -Author: Graeme W. Gill, licensed under the AGPL Version 3 -Diagnostic: Usage requested -usage: dispcal [options] outfile -.TP -\fB\-v\fR [n] -Verbose mode -.HP -\fB\-display\fR displayname Choose X11 display name -.TP -\fB\-d\fR n[,m] -Choose the display n from the following list (default 1) -Optionally choose different display m for VideoLUT access -.IP -1 = 'Screen 1, Output DVI\-I\-1 at 0, 0, width 1920, height 1080' -.TP -\fB\-dweb[\fR:port] -Display via a web server at port (default 8080) -.TP -\fB\-c\fR listno -Set communication port from the following list (default 1) -.IP -** No ports found ** -.TP -\fB\-r\fR -Report on the calibrated display then exit -.TP -\fB\-R\fR -Report on the uncalibrated display then exit -.TP -\fB\-m\fR -Skip adjustment of the monitor controls -.TP -\fB\-o\fR [profile.icc] -Create fast matrix/shaper profile [different filename to outfile.icc] -.TP -\fB\-O\fR "description" -Fast ICC Profile Description string (Default "outfile") -.TP -\fB\-u\fR -Update previous calibration and (if \fB\-o\fR used) ICC profile VideoLUTs -.TP -\fB\-q\fR [vlmh] -Quality \- Very Low, Low, Medium (def), High -.TP -\fB\-p\fR -Use telephoto mode (ie. for a projector) (if available) -.TP -\fB\-t\fR [temp] -White Daylight locus target, optional target temperaturee in deg. K (deflt.) -.TP -\fB\-T\fR [temp] -White Black Body locus target, optional target temperaturee in deg. K -.TP -\fB\-w\fR x,y -Set the target white point as chromaticity coordinates -.TP -\fB\-b\fR bright -Set the target white brightness in cd/m^2 -.TP -\fB\-g\fR gamma -Set the target response curve advertised gamma (Def. 2.4) -Use "\-gl" for L*a*b* curve -Use "\-gs" for sRGB curve -Use "\-g709" for REC 709 curve (should use \fB\-a\fR as well!) -Use "\-g240" for SMPTE 240M curve (should use \fB\-a\fR as well!) -Use "\-G2.4 \fB\-f0\fR" for BT.1886 -.TP -\fB\-G\fR gamma -Set the target response curve actual technical gamma -.TP -\fB\-f\fR [degree] -Amount of black level accounted for with output offset (default all output offset) -.TP -\fB\-a\fR ambient -Use viewing condition adjustment for ambient in Lux -.TP -\fB\-k\fR factor -Amount to correct black hue, 0 = none, 1 = full, Default = Automatic -.TP -\fB\-A\fR rate -Rate of blending from neutral to black point. Default 4.0 -.TP -\fB\-B\fR blkbright -Set the target black brightness in cd/m^2 -.TP -\fB\-e\fR [n] -Run n verify passes on final curves -.TP -\fB\-z\fR -Run only verify pass on installed calibration curves -.TP -\fB\-P\fR ho,vo,ss[,vs] -Position test window and scale it -ho,vi: 0.0 = left/top, 0.5 = center, 1.0 = right/bottom etc. -ss: 0.5 = half, 1.0 = normal, 2.0 = double etc. -.TP -\fB\-F\fR -Fill whole screen with black background -.TP -\fB\-n\fR -Don't set override redirect on test window -.TP -\fB\-E\fR -Encode the test values for video range 16..235/255 -.TP -\fB\-J\fR -Run instrument calibration first (used rarely) -.TP -\fB\-N\fR -Disable initial calibration of instrument if possible -.TP -\fB\-H\fR -Use high resolution spectrum mode (if available) -.TP -\fB\-X\fR file.ccmx -Apply Colorimeter Correction Matrix -.TP -\fB\-X\fR file.ccss -Use Colorimeter Calibration Spectral Samples for calibration -.TP -\fB\-Q\fR observ -Choose CIE Observer for spectrometer or CCSS colorimeter data: -1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2, 1964_10c -.TP -\fB\-I\fR b|w -Drift compensation, Black: \fB\-Ib\fR, White: \fB\-Iw\fR, Both: \fB\-Ibw\fR -.TP -\fB\-Y\fR R:rate -Override measured refresh rate with rate Hz -.TP -\fB\-Y\fR A -Use non\-adaptive integration time mode (if available). -.TP -\fB\-Y\fR p -Don't wait for the instrument to be placed on the display -.TP -\fB\-C\fR "command" -Invoke shell "command" each time a color is set -.TP -\fB\-M\fR "command" -Invoke shell "command" each time a color is measured -.TP -\fB\-W\fR n|h|x -Override serial port flow control: n = none, h = HW, x = Xon/Xoff -.TP -\fB\-D\fR [level] -Print debug diagnostics to stderr -.TP -inoutfile -Base name for created or updated .cal and .icc output files -.PP -Author: Graeme W. Gill, licensed under the AGPL Version 3 -Diagnostic: Usage requested -usage: dispcal [options] outfile +Calibrate a Display +.SH SYNOPSIS +.B dispcal +.RB [options]\ outfile .TP \fB\-v\fR [n] Verbose mode diff --git a/debian/man/dispread.1 b/debian/man/dispread.1 index dbf1776..a19b8c7 100644 --- a/debian/man/dispread.1 +++ b/debian/man/dispread.1 @@ -1,110 +1,12 @@ .\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. -.TH READ "1" "September 2014" "Read a Display, Version 1.6.3" "User Commands" +.TH READ "1" "September 2014" "dispread" "User Commands" .SH NAME Read \- Read a Display. .SH DESCRIPTION -Read a Display, Version 1.6.3 -Author: Graeme W. Gill, licensed under the AGPL Version 3 -Diagnostic: Usage requested -usage: dispread [options] outfile -.TP -\fB\-v\fR -Verbose mode -.HP -\fB\-display\fR displayname Choose X11 display name -.TP -\fB\-d\fR n[,m] -Choose the display n from the following list (default 1) -Optionally choose different display m for VideoLUT access -.IP -1 = 'Screen 1, Output DVI\-I\-1 at 0, 0, width 1920, height 1080' -.TP -\fB\-dweb[\fR:port] -Display via a web server at port (default 8080) -.TP -\fB\-c\fR listno -Set communication port from the following list (default 1) -.IP -** No ports found ** -.TP -\fB\-p\fR -Use telephoto mode (ie. for a projector) (if available) -.TP -\fB\-k\fR file.cal -Load calibration file into display while reading -.TP -\fB\-K\fR file.cal -Apply calibration file to test values while reading -.TP -\fB\-s\fR -Save spectral information (default don't save) -.TP -\fB\-P\fR ho,vo,ss[,vs] -Position test window and scale it -ho,vi: 0.0 = left/top, 0.5 = center, 1.0 = right/bottom etc. -ss: 0.5 = half, 1.0 = normal, 2.0 = double etc. -.TP -\fB\-F\fR -Fill whole screen with black background -.TP -\fB\-n\fR -Don't set override redirect on test window -.TP -\fB\-E\fR -Encode the test values for video range 16..235/255 -.TP -\fB\-J\fR -Run instrument calibration first (used rarely) -.TP -\fB\-N\fR -Disable initial calibration of instrument if possible -.TP -\fB\-H\fR -Use high resolution spectrum mode (if available) -.TP -\fB\-w\fR -Disable normalisation of white to Y = 100 -.TP -\fB\-X\fR file.ccmx -Apply Colorimeter Correction Matrix -.TP -\fB\-X\fR file.ccss -Use Colorimeter Calibration Spectral Samples for calibration -.TP -\fB\-Q\fR observ -Choose CIE Observer for spectrometer or CCSS colorimeter data: -1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2, 1964_10c -.TP -\fB\-I\fR b|w -Drift compensation, Black: \fB\-Ib\fR, White: \fB\-Iw\fR, Both: \fB\-Ibw\fR -.TP -\fB\-Y\fR R:rate -Override measured refresh rate with rate Hz -.TP -\fB\-Y\fR A -Use non\-adaptive integration time mode (if available). -.TP -\fB\-Y\fR p -Don't wait for the instrument to be placed on the display -.TP -\fB\-C\fR "command" -Invoke shell "command" each time a color is set -.TP -\fB\-M\fR "command" -Invoke shell "command" each time a color is measured -.TP -\fB\-W\fR n|h|x -Override serial port flow control: n = none, h = HW, x = Xon/Xoff -.TP -\fB\-D\fR [level] -Print debug diagnostics to stderr -.TP -outfile -Base name for input[ti1]/output[ti3] file -.PP -Author: Graeme W. Gill, licensed under the AGPL Version 3 -Diagnostic: Usage requested -usage: dispread [options] outfile +Read a Display +.SH SYNOPSIS +.B dispread +.RB [options]\ outfile .TP \fB\-v\fR Verbose mode diff --git a/debian/man/dispwin.1 b/debian/man/dispwin.1 index 9781182..c4c7594 100644 --- a/debian/man/dispwin.1 +++ b/debian/man/dispwin.1 @@ -1,88 +1,12 @@ .\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. -.TH TEST "1" "September 2014" "Test display patch window, Set Video LUTs, Install profiles, Version 1.6.3" "User Commands" +.TH TEST "1" "September 2014" "dispwin" "User Commands" .SH NAME Test \- Test display patch window, Set Video LUTs, Install profiles. .SH DESCRIPTION -Test display patch window, Set Video LUTs, Install profiles, Version 1.6.3 -Author: Graeme W. Gill, licensed under the AGPL Version 3 -Diagnostic: Unknown flag '\-\-help' -usage: dispwin [options] [calfile] -.TP -\fB\-v\fR -Verbose mode -.HP -\fB\-display\fR displayname Choose X11 display name -.TP -\fB\-d\fR n[,m] -Choose the display n from the following list (default 1) -Optionally choose different display m for Video LUT access -.IP -1 = 'Screen 1, Output DVI\-I\-1 at 0, 0, width 1920, height 1080' -.TP -\fB\-dweb[\fR:port] -Display via a web server at port (default 8080) -.TP -\fB\-P\fR ho,vo,ss[,vs] -Position test window and scale it -.TP -\fB\-F\fR -Fill whole screen with black background -.TP -\fB\-i\fR -Run forever with random values -.TP -\fB\-G\fR filename -Display RGB colors from CGATS file -.TP -\fB\-C\fR r.rr,g.gg,b.bb -Add this RGB color to list to be displayed -.TP -\fB\-m\fR -Manually cycle through values -.TP -\fB\-f\fR -Test grey ramp fade -.TP -\fB\-r\fR -Test just Video LUT loading & Beeps -.TP -\fB\-n\fR -Test native output (rather than through Video LUT and C.M.) -.TP -\fB\-s\fR filename -Save the currently loaded Video LUT to 'filename' -.TP -\fB\-c\fR -Load a linear display calibration -.TP -\fB\-V\fR -Verify that calfile/profile cal. is currently loaded in LUT -.TP -\fB\-I\fR -Install profile for display and use it's calibration -.TP -\fB\-U\fR -Un\-install profile for display -.TP -\fB\-S\fR d -Specify the install/uninstall scope for OS X [nlu] or X11/Vista [lu] -d is one of: n = network, l = local system, u = user (default) -.TP -\fB\-L\fR -Load installed profiles cal. into Video LUT -.TP -\fB\-X\fR -Run in daemon loader mode for given X11 server -.TP -\fB\-D\fR [level] -Print debug diagnostics to stderr -.TP -calfile -Load calibration (.cal or .icc) into Video LUT -.PP -Author: Graeme W. Gill, licensed under the AGPL Version 3 -Diagnostic: Unknown flag '\-\-version' -usage: dispwin [options] [calfile] +Test display patch window, Set Video LUTs, Install profiles +.SH SYNOPSIS +.B dispwin +.RB [options]\ [calfile] .TP \fB\-v\fR Verbose mode diff --git a/debian/man/extracticc.1 b/debian/man/extracticc.1 index 5bf0a00..9d5adad 100644 --- a/debian/man/extracticc.1 +++ b/debian/man/extracticc.1 @@ -1,19 +1,12 @@ .\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. -.TH EXTRACT "1" "September 2014" "Extract an ICC profile from a TIFF or JPEG file, Version 1.6.3" "User Commands" +.TH EXTRACT "1" "September 2014" "extracticc" "User Commands" .SH NAME Extract \- Extract an ICC profile from a TIFF file. .SH DESCRIPTION -Extract an ICC profile from a TIFF or JPEG file, Version 1.6.3 -Author: Graeme W. Gill, licensed under the AGPL Version 3 -Diagnostic: Too few parameters -usage: extracticc [\-v] infile.tif/jpg outfile.icc -.TP -\fB\-v\fR -Verbose -.PP -Author: Graeme W. Gill, licensed under the AGPL Version 3 -Diagnostic: Too few parameters -usage: extracticc [\-v] infile.tif/jpg outfile.icc +Extract an ICC profile from a TIFF or JPEG file +.SH SYNOPSIS +.B extracticc +.RB [\-v]\ infile.(tif|jpg)\ outfile.icc .TP \fB\-v\fR Verbose diff --git a/debian/man/extractttag.1 b/debian/man/extractttag.1 index 9bc01dc..eac947a 100644 --- a/debian/man/extractttag.1 +++ b/debian/man/extractttag.1 @@ -1,25 +1,12 @@ .\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. -.TH EXTRACT "1" "September 2014" "Extract a text tag from an ICC profile, Version 1.6.3" "User Commands" +.TH EXTRACT "1" "September 2014" "extractttag" "User Commands" .SH NAME Extract \- Extract a text tag from an ICC profile. .SH DESCRIPTION -Extract a text tag from an ICC profile, Version 1.6.3 -Author: Graeme W. Gill, licensed under the AGPL Version 3 -Diagnostic: Too few parameters -usage: extractttag [\-v] infile.icc outfile -.TP -\fB\-v\fR -Verbose -.TP -\fB\-t\fR tag -Extract this tag rather than default 'targ' -.TP -\fB\-c\fR -Extract calibration file from 'targ' tag -.PP -Author: Graeme W. Gill, licensed under the AGPL Version 3 -Diagnostic: Too few parameters -usage: extractttag [\-v] infile.icc outfile +Extract a text tag from an ICC profile +.SH SYNOPSIS +.B extractttag +.RB [\-v]\ infile.icc\ outfile .TP \fB\-v\fR Verbose diff --git a/debian/man/fakeCMY.1 b/debian/man/fakeCMY.1 index 91d02f9..6509ad6 100644 --- a/debian/man/fakeCMY.1 +++ b/debian/man/fakeCMY.1 @@ -1,28 +1,12 @@ .\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. -.TH CREATE "1" "September 2014" "Create a fake CMY data file from a CMYK profile, Version 1.6.3" "User Commands" +.TH CREATE "1" "September 2014" "fakeCMY" "User Commands" .SH NAME Create \- Create a fake CMY data file from a CMYK profile. .SH DESCRIPTION -Create a fake CMY data file from a CMYK profile, Version 1.6.3 -Author: Graeme W. Gill, licensed under the AGPL Version 3 -usage: fakeCMY [option] profile.icm fake.ti3 -Diagnostic: Unknown flag -.TP -\fB\-v\fR -verbose -.TP -\fB\-r\fR res -set surface point resolution (default 3) -.TP -\fB\-l\fR tlimit -set total ink limit, 0 \- 400% (estimate by default) -.TP -\fB\-L\fR klimit -set black ink limit, 0 \- 100% (estimate by default) -.PP -Author: Graeme W. Gill, licensed under the AGPL Version 3 -usage: fakeCMY [option] profile.icm fake.ti3 -Diagnostic: Unknown flag +Create a fake CMY data file from a CMYK profile +.SH SYNOPSIS +.B fakeCMY +.RB [option]\ profile.icm\ fake.ti3 .TP \fB\-v\fR verbose diff --git a/debian/man/fakeread.1 b/debian/man/fakeread.1 index 337fe45..1af12e0 100644 --- a/debian/man/fakeread.1 +++ b/debian/man/fakeread.1 @@ -1,101 +1,12 @@ .\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. -.TH FAKE "1" "September 2014" "Fake test chart reader - lookup values in ICC/MPP profile, Version 1.6.3" "User Commands" +.TH FAKE "1" "September 2014" "fakeread" "User Commands" .SH NAME Fake \- Fake test chart reader - lookup values in ICC/MPP profile. .SH DESCRIPTION -Fake test chart reader \- lookup values in ICC/MPP profile, Version 1.6.3 -Author: Graeme W. Gill, licensed under the AGPL Version 3 -.IP -Diagnostic: Too few arguments -.PP -usage: fakeread [\-options] profile.[icc|mpp|ti3] outfile -.TP -\fB\-v\fR [n] -Verbose mode [level] -.TP -\fB\-e\fR flag -Video encode device input to sepration as: -.TP -n -normal 0..1 full range RGB levels (default) -.TP -t -(16\-235)/255 "TV" RGB levels -.TP -6 -Rec601 YCbCr SD (16\-235,240)/255 "TV" levels -.TP -7 -Rec709 1125/60Hz YCbCr HD (16\-235,240)/255 "TV" levels -.TP -5 -Rec709 1250/50Hz YCbCr HD (16\-235,240)/255 "TV" levels -.TP -2 -Rec2020 YCbCr UHD (16\-235,240)/255 "TV" levels -.TP -C -Rec2020 Constant Luminance YCbCr UHD (16\-235,240)/255 "TV" levels -.HP -\fB\-p\fR separation.icc Use device link separation profile on input -.TP -\fB\-E\fR flag -Video decode separation device output. See \fB\-e\fR above -.TP -\fB\-k\fR file.cal -Apply calibration (include in .ti3 output) -.TP -\fB\-i\fR file.cal -Include calibration in .ti3 output, but don't apply it -.TP -\fB\-K\fR file.cal -Apply inverse calibration -.TP -\fB\-r\fR level -Add average random deviation of % to device values (after sep. & cal.) -.TP -\fB\-0\fR pow -Apply power to device chanel 0\-9 -.TP -\fB\-b\fR output.icc -Apply BT.1886\-like mapping with effective gamma 2.2 -.HP -\fB\-b\fR g.g:output.icc Apply BT.1886\-like mapping with effective gamma g.g -.TP -\fB\-B\fR output.icc -Apply BT.1886 mapping with technical gamma 2.4 -.HP -\fB\-B\fR g.g:output.icc Apply BT.1886 mapping with technical gamma g.g -.TP -\fB\-I\fR intent -r = relative colorimetric, a = absolute (default) -.TP -\fB\-A\fR L,a,b -Scale black point to target Lab value -.TP -\fB\-l\fR -Output Lab rather than XYZ -.TP -\fB\-s\fR -Lookup MPP spectral values -.TP -\fB\-R\fR level -Add average random deviation of % to output PCS values -.TP -\fB\-u\fR -Make random deviations have uniform distributions rather than normal -.TP -\fB\-S\fR seed -Set random seed -.IP -profile.[icc|mpp|ti3] ICC, MPP profile or TI3 to use -outfile Base name for input[ti1]/output[ti3] file -.PP -Author: Graeme W. Gill, licensed under the AGPL Version 3 -.IP -Diagnostic: Too few arguments -.PP -usage: fakeread [\-options] profile.[icc|mpp|ti3] outfile +Fake test chart reader \- lookup values in ICC/MPP profile +.SH SYNOPSIS +.B fakeread +.RB [\-options]\ profile.[icc|mpp|ti3]\ outfile .TP \fB\-v\fR [n] Verbose mode [level] diff --git a/debian/man/greytiff.1 b/debian/man/greytiff.1 index 137686c..f1b71d6 100644 --- a/debian/man/greytiff.1 +++ b/debian/man/greytiff.1 @@ -1,23 +1,12 @@ .\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. -.TH CONVERT "1" "September 2014" "Convert a TIFF file to monochrome using an ICC device profile, V1.6.3" "User Commands" +.TH CONVERT "1" "September 2014" "greytiff" "User Commands" .SH NAME Convert \- Convert a TIFF file to monochrome using an ICC device profile. .SH DESCRIPTION -Convert a TIFF file to monochrome using an ICC device profile, V1.6.3 -Author: Graeme W. Gill, licensed under the AGPL Version 3 -usage: greytiff [\-v level] profile.icm infile.tif outfile.tif -.TP -\fB\-v\fR -Verbose -.TP -\fB\-p\fR -Use slow precise correction -.TP -\fB\-j\fR -Use CIECAM02 -.PP -Author: Graeme W. Gill, licensed under the AGPL Version 3 -usage: greytiff [\-v level] profile.icm infile.tif outfile.tif +Convert a TIFF file to monochrome using an ICC device profile +.SH SYNOPSIS +.B greytiff +.RB [\-v\ level]\ profile.icm\ infile.tif\ outfile.tif .TP \fB\-v\fR Verbose diff --git a/debian/man/iccdump.1 b/debian/man/iccdump.1 index 6c75135..e508f13 100644 --- a/debian/man/iccdump.1 +++ b/debian/man/iccdump.1 @@ -1,26 +1,12 @@ .\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. -.TH DUMP "1" "September 2014" "Dump an ICC file in human readable form, V2.17" "User Commands" +.TH DUMP "1" "September 2014" "iccdump" "User Commands" .SH NAME Dump \- Dump an ICC file in human readable form. .SH DESCRIPTION -Dump an ICC file in human readable form, V2.17 -Author: Graeme W. Gill -usage: iccdump [\-v level] [\-t tagname] [\-s] infile -.TP -\fB\-v\fR level -Verbose level 1\-3 (default 2) -.TP -\fB\-t\fR tag -Dump this tag only (can be used multiple times) -.TP -\fB\-s\fR -Search for embedded profile -.TP -\fB\-i\fR -Check V4 ID value -.PP -Author: Graeme W. Gill -usage: iccdump [\-v level] [\-t tagname] [\-s] infile +Dump an ICC file in human readable form +.SH SYNOPSIS +.B iccdump +.RB [\-v\ level]\ [\-t\ tagname]\ [\-s]\ infile .TP \fB\-v\fR level Verbose level 1\-3 (default 2) diff --git a/debian/man/iccgamut.1 b/debian/man/iccgamut.1 index b83978a..2aa40ff 100644 --- a/debian/man/iccgamut.1 +++ b/debian/man/iccgamut.1 @@ -1,104 +1,12 @@ .\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. -.TH CREATE "1" "September 2014" "Create Lab/Jab gamut plot Version 1.6.3" "User Commands" +.TH CREATE "1" "September 2014" "iccgamut" "User Commands" .SH NAME Create \- Create Lab/Jab gamut plot. .SH DESCRIPTION -Create Lab/Jab gamut plot Version 1.6.3 -Author: Graeme W. Gill, licensed under the AGPL Version 3 -usage: iccgamut [options] profile -Diagnostic: Unknown flag -.TP -\fB\-v\fR -Verbose -.TP -\fB\-d\fR sres -Surface resolution details 1.0 \- 50.0 -.TP -\fB\-w\fR -emit VRML .wrl file as well as CGATS .gam file -.TP -\fB\-n\fR -Don't add VRML axes or white/black point -.TP -\fB\-k\fR -Add VRML markers for prim. & sec. "cusp" points -.TP -\fB\-f\fR function -f = forward*, b = backwards -.TP -\fB\-i\fR intent -p = perceptual, r = relative colorimetric, -s = saturation, a = absolute (default), d = profile default -.TP -\fB\-p\fR oride -l = Lab_PCS (default), j = CIECAM02 Appearance Jab -.TP -\fB\-o\fR order -n = normal (priority: lut > matrix > monochrome) -r = reverse (priority: monochrome > matrix > lut) -.TP -\fB\-l\fR tlimit -set total ink limit, 0 \- 400% (estimate by default) -.TP -\fB\-L\fR klimit -set black ink limit, 0 \- 100% (estimate by default) -.TP -\fB\-c\fR viewcond -set viewing conditions for CIECAM02, -either an enumerated choice, or a series of parameter:value changes -.IP -pp \- Practical Reflection Print (ISO\-3664 P2) -pe \- Print evaluation environment (CIE 116\-1995) -pc \- Critical print evaluation environment (ISO\-3664 P1) -mt \- Monitor in typical work environment -mb \- Bright monitor in bright work environment -md \- Monitor in darkened work environment -jm \- Projector in dim environment -jd \- Projector in dark environment -tv \- Television/Film Studio -.IP -pcd \- Photo CD \- original scene outdoors -.IP -ob \- Original scene \- Bright Outdoors -cx \- Cut Sheet Transparencies on a viewing box -.TP -s:surround -n = auto, a = average, m = dim, d = dark, -c = transparency (default average) -.TP -w:X:Y:Z -Adapted white point as XYZ (default media white) -.TP -w:x:y -Adapted white point as x, y -.TP -a:adaptation -Adaptation luminance in cd.m^2 (default 50.0) -.TP -b:background -Background % of image luminance (default 20) -.TP -l:imagewhite -Image white in cd.m^2 if surround = auto (default 250) -.TP -f:flare -Flare light % of image luminance (default 0) -.TP -g:glare -Flare light % of ambient (default 1) -.TP -g:X:Y:Z -Flare color as XYZ (default media white, Abs: D50) -.TP -g:x:y -Flare color as x, y -.TP -\fB\-s\fR -Create special cube surface topology plot -.PP -Author: Graeme W. Gill, licensed under the AGPL Version 3 -usage: iccgamut [options] profile -Diagnostic: Unknown flag +Create Lab/Jab gamut plot +.SH SYNOPSIS +.B iccgamut +.RB [options]\ profile .TP \fB\-v\fR Verbose diff --git a/debian/man/icclu.1 b/debian/man/icclu.1 index 5a2c08f..5cccdde 100644 --- a/debian/man/icclu.1 +++ b/debian/man/icclu.1 @@ -1,39 +1,12 @@ .\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. -.TH TRANSLATE "1" "September 2014" "Translate colors through an ICC profile, V2.17" "User Commands" +.TH TRANSLATE "1" "September 2014" "icclu" "User Commands" .SH NAME Translate \- Translate colors through an ICC profile. .SH DESCRIPTION -Translate colors through an ICC profile, V2.17 -Author: Graeme W. Gill -usage: icclu [\-v level] [\-f func] [\-i intent] [\-o order] profile -.TP -\fB\-v\fR level -Verbosity level 0 \- 2 (default = 1) -.TP -\fB\-f\fR function -f = forward, b = backwards, g = gamut, p = preview -.TP -\fB\-i\fR intent -p = perceptual, r = relative colorimetric, -s = saturation, a = absolute -.TP -\fB\-p\fR oride -x = XYZ_PCS, l = Lab_PCS, y = Yxy, -.TP -\fB\-o\fR order -n = normal (priority: lut > matrix > monochrome) -r = reverse (priority: monochrome > matrix > lut) -.TP -\fB\-s\fR scale -Scale device range 0.0 \- scale rather than 0.0 \- 1.0 -.IP -The colors to be translated should be fed into standard input, -one input color per line, white space separated. -A line starting with a # will be ignored. -A line not starting with a number will terminate the program. -.PP -Author: Graeme W. Gill -usage: icclu [\-v level] [\-f func] [\-i intent] [\-o order] profile +Translate colors through an ICC profile +.SH SYNOPSIS +.B icclu +.RB [\-v\ level]\ [\-f\ func]\ [\-i\ intent]\ [\-o\ order]\ profile .TP \fB\-v\fR level Verbosity level 0 \- 2 (default = 1) diff --git a/debian/man/illumread.1 b/debian/man/illumread.1 index 078ae66..aaec8c3 100644 --- a/debian/man/illumread.1 +++ b/debian/man/illumread.1 @@ -1,46 +1,12 @@ .\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. -.TH MEASURE "1" "September 2014" "Measure an illuminant, Version 1.6.3" "User Commands" +.TH MEASURE "1" "September 2014" "illumread" "User Commands" .SH NAME Measure \- Measure an illuminant. .SH DESCRIPTION -Measure an illuminant, Version 1.6.3 -Author: Graeme W. Gill, licensed under the AGPL Version 3 -usage: illumread [\-options] output.sp -.TP -\fB\-v\fR -Verbose mode -.TP -\fB\-S\fR -Plot spectrum for each reading -.TP -\fB\-c\fR listno -Choose instrument from the following list (default 1) -.IP -** No ports found ** -.TP -\fB\-N\fR -Disable initial calibration of instrument if possible -.TP -\fB\-H\fR -Use high resolution spectrum mode (if available) -.TP -\fB\-Y\fR r -Set refresh measurement mode -.TP -\fB\-Y\fR R:rate -Override measured refresh rate with rate Hz -.TP -\fB\-W\fR n|h|x -Override serial port flow control: n = none, h = HW, x = Xon/Xoff -.TP -\fB\-D\fR [level] -Print debug diagnostics to stderr -.TP -illuminant.sp -File to save measurement to -.PP -Author: Graeme W. Gill, licensed under the AGPL Version 3 -usage: illumread [\-options] output.sp +Measure an illuminant +.SH SYNOPSIS +.B illumread +.RB [\-options]\ output.sp .TP \fB\-v\fR Verbose mode diff --git a/debian/man/invprofcheck.1 b/debian/man/invprofcheck.1 index f61e35e..60d897b 100644 --- a/debian/man/invprofcheck.1 +++ b/debian/man/invprofcheck.1 @@ -1,50 +1,12 @@ .\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. -.TH CHECK "1" "September 2014" "Check fwd to bwd relative transfer of an ICC file, Version 1.6.3" "User Commands" +.TH CHECK "1" "September 2014" "invprofcheck" "User Commands" .SH NAME Check \- Check fwd to bwd relative transfer of an ICC file. .SH DESCRIPTION -Check fwd to bwd relative transfer of an ICC file, Version 1.6.3 -Author: Graeme W. Gill -usage: invprofcheck [\-] profile.icm -.TP -\fB\-v\fR [level] -verbosity level (default 1), 2 to print each DE -.TP -\fB\-l\fR limit -set total ink limit (estimate by default) -.TP -\fB\-L\fR klimit -set black channel ink limit (estimate by default) -.TP -\fB\-h\fR -high res test (27) -.TP -\fB\-u\fR -Ultra high res test (61) -.TP -\fB\-R\fR res -Specific grid resolution -.TP -\fB\-c\fR -Show CIE94 delta E values -.TP -\fB\-k\fR -Show CIEDE2000 delta E values -.TP -\fB\-w\fR -create VRML visualisation (profile.wrl) -.TP -\fB\-x\fR -Use VRML axes -.TP -\fB\-e\fR -Color vectors according to delta E -.TP -profile.icm -Profile to check -.PP -Author: Graeme W. Gill -usage: invprofcheck [\-] profile.icm +Check fwd to bwd relative transfer of an ICC file +.SH SYNOPSIS +.B invprofcheck +.RB [\-]\ profile.icm .TP \fB\-v\fR [level] verbosity level (default 1), 2 to print each DE diff --git a/debian/man/kodak2ti3.1 b/debian/man/kodak2ti3.1 index 78db11d..45abd06 100644 --- a/debian/man/kodak2ti3.1 +++ b/debian/man/kodak2ti3.1 @@ -1,29 +1,12 @@ .\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. -.TH CONVERT "1" "September 2014" "Convert Kodak raw printer profile data to Argyll print data, Version 1.6.3" "User Commands" +.TH CONVERT "1" "September 2014" "kodak2ti3" "User Commands" .SH NAME Convert \- Convert Kodak raw printer profile data to Argyll print data. .SH DESCRIPTION -Convert Kodak raw printer profile data to Argyll print data, Version 1.6.3 -Author: Graeme W. Gill, licensed under the AGPL Version 3 -usage: kodak2ti3 [\-v] [\-l limit] infile outfile -.TP -\fB\-v\fR -Verbose mode -.TP -\fB\-l\fR limit -set ink limit, 0 \- 400% -.TP -\fB\-r\fR filename -Use an alternate 928 patch reference file -.TP -infile -Base name for input.pat file -.TP -outfile -Base name for output.ti3 file -.PP -Author: Graeme W. Gill, licensed under the AGPL Version 3 -usage: kodak2ti3 [\-v] [\-l limit] infile outfile +Convert Kodak raw printer profile data to Argyll print data +.SH SYNOPSIS +.B kodak2ti3 +.RB [\-v]\ [\-l\ limit]\ infile\ outfile .TP \fB\-v\fR Verbose mode diff --git a/debian/man/mppcheck.1 b/debian/man/mppcheck.1 index 51cfdc7..1cd6b16 100644 --- a/debian/man/mppcheck.1 +++ b/debian/man/mppcheck.1 @@ -1,34 +1,12 @@ .\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. -.TH CHECK "1" "September 2014" "Check Model Printer Profile, Version 1.6.3" "User Commands" +.TH CHECK "1" "September 2014" "mppcheck" "User Commands" .SH NAME Check \- Check Model Printer Profile. .SH DESCRIPTION -Check Model Printer Profile, Version 1.6.3 -Author: Graeme W. Gill, licensed under the AGPL Version 3 -usage: debian/tmp/usr/bin/mppcheck [\-v] [\-c] [\-s] [\-y] values.ti3 profile.mpp -.TP -\fB\-v\fR -Verbose mode -.TP -\fB\-c\fR -Show CIE94 delta E values -.TP -\fB\-k\fR -Show CIEDE2000 delta E values -.TP -\fB\-s\fR -Check spectral model too -.TP -\fB\-y\fR -Detail each value -.TP -values.ti3 -Test values to check against -.IP -profile.mpp Profile to check -.PP -Author: Graeme W. Gill, licensed under the AGPL Version 3 -usage: debian/tmp/usr/bin/mppcheck [\-v] [\-c] [\-s] [\-y] values.ti3 profile.mpp +Check Model Printer Profile +.SH SYNOPSIS +.B mppcheck +.RB [\-v]\ [\-c]\ [\-s]\ [\-y]\ values.ti3\ profile.mpp .TP \fB\-v\fR Verbose mode diff --git a/debian/man/mpplu.1 b/debian/man/mpplu.1 index 2f9fdcd..5651f26 100644 --- a/debian/man/mpplu.1 +++ b/debian/man/mpplu.1 @@ -1,62 +1,12 @@ .\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. -.TH TRANSLATE "1" "September 2014" "Translate colors through an MPP profile, V1.00" "User Commands" +.TH TRANSLATE "1" "September 2014" "" "User Commands" .SH NAME Translate \- Translate colors through an MPP profile. .SH DESCRIPTION -Translate colors through an MPP profile, V1.00 -Author: Graeme W. Gill -usage: mpplu [\-v] [\-f func] [\-i intent] [\-o order] profile -.TP -\fB\-v\fR -Verbose -.TP -\fB\-f\fR function -f = forward, b = backwards -.TP -\fB\-p\fR oride -x = XYZ_PCS, l = Lab_PCS, y = Yxy, s = spectral, -.TP -\fB\-l\fR limit -override default ink limit, 1 \- N00% -.TP -\fB\-i\fR illum -Choose illuminant for print/transparency spectral data: -A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp -.TP -\fB\-o\fR observ -Choose CIE Observer for spectral data: -1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2 -.TP -\fB\-u\fR -Use Fluorescent Whitening Agent compensation -.TP -\fB\-g\fR -Create gamut output -.TP -\fB\-w\fR -Create gamut VRML as well -.TP -\fB\-n\fR -Don't add VRML axes -.TP -\fB\-a\fR n -Gamut transparency level -.TP -\fB\-d\fR n -Gamut surface detail level -.TP -\fB\-t\fR num -Invoke debugging test code "num" 1..n -1 \- check partial derivative for device input -2 \- create overlap diagnostic VRML gamut surface -.IP -The colors to be translated should be fed into stdin, -one input color per line, white space separated. -A line starting with a # will be ignored. -A line not starting with a number will terminate the program. -.PP -Author: Graeme W. Gill -usage: mpplu [\-v] [\-f func] [\-i intent] [\-o order] profile +Translate colors through an MPP profile +.SH SYNOPSIS +.B mpplu +.RB [\-v]\ [\-f\ func]\ [\-i\ intent]\ [\-o\ order]\ profile .TP \fB\-v\fR Verbose diff --git a/debian/man/mppprof.1 b/debian/man/mppprof.1 index f0c129b..13a18ef 100644 --- a/debian/man/mppprof.1 +++ b/debian/man/mppprof.1 @@ -1,35 +1,12 @@ .\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. -.TH CREATE "1" "September 2014" "Create Model Printer Profile, Version 1.6.3" "User Commands" +.TH CREATE "1" "September 2014" "mppprof" "User Commands" .SH NAME Create \- Create Model Printer Profile. .SH DESCRIPTION -Create Model Printer Profile, Version 1.6.3 -Author: Graeme W. Gill, licensed under the AGPL Version 3 -usage: debian/tmp/usr/bin/mppprof [options] outfile -.HP -\fB\-v\fR [level] Verbose mode -.HP -\fB\-q\fR [lmhus] Quality \- Low, Medium (def), High, Ultra, Simple -.TP -\fB\-l\fR limit -override default ink limit, 1 \- n00% -.TP -\fB\-s\fR -Generate spectral model too -.TP -\fB\-m\fR -Generate ink mixing model -.HP -\fB\-y\fR [level] Verify profile, 2 = read/write verify -.TP -\fB\-L\fR -Output Lab values -.TP -outfile -Base name for input.ti3/output.mpp file -.PP -Author: Graeme W. Gill, licensed under the AGPL Version 3 -usage: debian/tmp/usr/bin/mppprof [options] outfile +Create Model Printer Profile +.SH SYNOPSIS +.B mppprof +.RB [options]\ outfile .HP \fB\-v\fR [level] Verbose mode .HP diff --git a/debian/man/oeminst.1 b/debian/man/oeminst.1 index 28de472..ea56505 100644 --- a/debian/man/oeminst.1 +++ b/debian/man/oeminst.1 @@ -1,33 +1,12 @@ .\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. -.TH INSTALL "1" "September 2014" "Install OEM data files, Version 1.6.3" "User Commands" +.TH INSTALL "1" "September 2014" "oeminst" "User Commands" .SH NAME Install \- List information about the FILEs. .SH DESCRIPTION -Install OEM data files, Version 1.6.3 -Author: Graeme W. Gill, licensed under the GPL Version 2 or later -usage: oeminst [\-options] [infile(s)] -.TP -\fB\-v\fR [level] -Verbose -.TP -\fB\-n\fR -Don't install, show where files would be installed -.TP -\fB\-c\fR -Don't install, save files to current directory -.TP -\fB\-S\fR d -Specify the install scope u = user (def.), l = local system] -.TP -infile -setup.exe CD install file(s) or .dll(s) containing install files -.TP -infile.[edr|ccss|ccmx] -EDR file(s) to translate and install or CCSS or CCMX files to install -If no file is provided, oeminst will look for the install CD. -.PP -Author: Graeme W. Gill, licensed under the GPL Version 2 or later -usage: oeminst [\-options] [infile(s)] +Install OEM data files +.SH SYNOPSIS +.B oeminst +.RB [\-options]\ [infile(s)] .TP \fB\-v\fR [level] Verbose diff --git a/debian/man/printcal.1 b/debian/man/printcal.1 index 5680462..38038d6 100644 --- a/debian/man/printcal.1 +++ b/debian/man/printcal.1 @@ -1,88 +1,12 @@ .\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. -.TH CREATE "1" "September 2014" "Create printer calibration, Version 1.6.3" "User Commands" +.TH CREATE "1" "September 2014" "printcal" "User Commands" .SH NAME Create \- Create printer calibration. .SH DESCRIPTION -Create printer calibration, Version 1.6.3 -Author: Graeme W. Gill, licensed under the AGPL Version 3 -.IP -Diagnostic: Too few arguments, got 1 expect at least 2 -.PP -usage: debian/tmp/usr/bin/printcal [\-options] [prevcal] inoutfile -.TP -\fB\-v\fR verbosity -Verbose mode -.TP -\fB\-p\fR -Plot graphs. -.TP -\fB\-i\fR -Initial calibration, set targets, create .cal -.TP -\fB\-r\fR -Re\-calibrate against previous .cal and create new .cal -.TP -\fB\-e\fR -Verify against previous .cal -.TP -\fB\-I\fR -Create imitation target from .ti3 and null calibration -.TP -\fB\-d\fR -Go through the motions but don't write any files -.TP -\fB\-s\fR smoothing -Extra curve smoothing (default 1.0) -.HP -\fB\-A\fR manufacturer Set the manufacturer description string -.TP -\fB\-M\fR model -Set the model description string -.TP -\fB\-D\fR description -Set the profile Description string -.TP -\fB\-C\fR copyright -Set the copyright string -.TP -\fB\-x\fR# percent -Set initial maximum device % target (override auto) -.TP -\fB\-m\fR# percent -Set initial dev target to % of auto maximum -.TP -\fB\-n\fR# deltaE -Set initial white minimum deltaE target -.TP -\fB\-t\fR# percent -Set initial 50% transfer curve percentage target -.TP -# = c, r, 0 -First channel -.TP -m, g, 1 -Second channel -.TP -y, b, 2 -Third channel -.TP -k, -3 Fourth channel, etc. -.TP -\fB\-a\fR -Create an Adobe Photoshop .AMP file as well as a .cal -.TP -prevcal -Base name of previous .cal file for recal or verify. -.TP -inoutname -Base name of input .ti3 file, output .cal file -.PP -Author: Graeme W. Gill, licensed under the AGPL Version 3 -.IP -Diagnostic: Too few arguments, got 1 expect at least 2 -.PP -usage: debian/tmp/usr/bin/printcal [\-options] [prevcal] inoutfile +Create printer calibration +.SH SYNOPSIS +.B printcal +.RB [\-options]\ [prevcal]\ inoutfile .TP \fB\-v\fR verbosity Verbose mode diff --git a/debian/man/printtarg.1 b/debian/man/printtarg.1 index f8e21d9..59ad2ba 100644 --- a/debian/man/printtarg.1 +++ b/debian/man/printtarg.1 @@ -1,136 +1,12 @@ .\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. -.TH GENERATE "1" "September 2014" "Generate Target PostScrip file, Version 1.6.3" "User Commands" +.TH GENERATE "1" "September 2014" "printarg" "User Commands" .SH NAME Generate \- Generate Target PostScrip file. .SH DESCRIPTION -Generate Target PostScrip file, Version 1.6.3 -Author: Graeme W. Gill, licensed under the AGPL Version 3 -.IP -Diagnostic: Unknown flag -.PP -usage: printtarg [\-v] [\-i instr] [\-r] [\-s] [\-p size] basename -.TP -\fB\-v\fR -Verbose mode -.HP -\fB\-i\fR 20 | 22 | 41 | 51 | SS | i1 | CM Select target instrument (default DTP41) -.IP -20 = DTP20, 22 = DTP22, 41 = DTP41, 51 = DTP51, -SS = SpectroScan, i1 = i1Pro, CM = ColorMunki -.TP -\fB\-h\fR -Use hexagon patches for SS, double density for CM -.TP -\fB\-a\fR scale -Scale patch size and spacers by factor (e.g. 0.857 or 1.5 etc.) -.TP -\fB\-A\fR scale -Scale spacers by additional factor (e.g. 0.857 or 1.5 etc.) -.TP -\fB\-r\fR -Don't randomize patch location -.TP -\fB\-s\fR -Create a scan image recognition (.cht) file -.TP -\fB\-S\fR -Same as \fB\-s\fR, but don't generate wide orientation strip. -.TP -\fB\-c\fR -Force colored spacers -.TP -\fB\-b\fR -Force B&W spacers -.TP -\fB\-n\fR -Force no spacers -.TP -\fB\-f\fR -Create PostScript DeviceN Color fallback -.TP -\fB\-w\fR g|r|s|n -White colorspace encoding DeviceGray (def), DeviceRGB, Separation or DeviceN -.TP -\fB\-k\fR g|c|s|n -Black colorspace encoding DeviceGray (def), DeviceCMYK, Separation or DeviceN -.TP -\fB\-o\fR k|r|n -CMY colorspace encoding DefiveCMYK (def), inverted DeviceRGB or DeviceN -.TP -\fB\-e\fR -Output EPS compatible file -.TP -\fB\-t\fR [res] -Output 8 bit TIFF raster file, optional res DPI (default 100) -.TP -\fB\-T\fR [res] -Output 16 bit TIFF raster file, optional res DPI (default 100) -.TP -\fB\-C\fR -Don't use TIFF compression -.TP -\fB\-N\fR -Use TIFF alpha N channels more than 4 -.TP -\fB\-D\fR -Dither 8 bit TIFF values down from 16 bit -.TP -\fB\-Q\fR nbits -Quantize test values to fit in nbits -.TP -\fB\-R\fR rsnum -Use given random start number -.TP -\fB\-K\fR file.cal -Apply printer calibration to patch values and include in .ti2 -.TP -\fB\-I\fR file.cal -Include calibration in .ti2 (but don't apply it) -.TP -\fB\-x\fR pattern -Use given strip indexing pattern (Default = "A\-Z, A\-Z") -.TP -\fB\-y\fR pattern -Use given patch indexing pattern (Default = "0\-9,@\-9,@\-9;1\-999") -.TP -\fB\-m\fR margin -Set a page margin in mm (default 6.0 mm) -.TP -\fB\-M\fR margin -Set a page margin in mm and include it in TIFF -.TP -\fB\-P\fR -Don't limit strip length -.TP -\fB\-L\fR -Suppress any left paper clip border -.TP -\fB\-U\fR -Suppress CUPS cupsJobTicket: cups\-disable\-cmm in PS & EPS files -.TP -\fB\-p\fR size -Select page size from: -A4 [210.0 x 297.0 mm] -A4R [297.0 x 210.0 mm] -A3 [297.0 x 420.0 mm] (default) -A2 [420.0 x 594.0 mm] -Letter [215.9 x 279.4 mm] -LetterR [279.4 x 215.9 mm] -Legal [215.9 x 355.6 mm] -4x6 [101.6 x 152.4 mm] -11x17 [279.4 x 431.8 mm] -.TP -\fB\-p\fR WWWxHHH -Custom size, WWW mm wide by HHH mm high -.TP -basname -Base name for input(.ti1), output(.ti2) and output(.ps/.eps/.tif) -.PP -Author: Graeme W. Gill, licensed under the AGPL Version 3 -.IP -Diagnostic: Unknown flag -.PP -usage: printtarg [\-v] [\-i instr] [\-r] [\-s] [\-p size] basename +Generate Target PostScrip file +.SH SYNOPSIS +.B printtarg +.RB [\-v]\ [\-i\ instr]\ [\-r]\ [\-s]\ [\-p\ size]\ basename .TP \fB\-v\fR Verbose mode diff --git a/debian/man/profcheck.1 b/debian/man/profcheck.1 index d290f68..683786a 100644 --- a/debian/man/profcheck.1 +++ b/debian/man/profcheck.1 @@ -1,66 +1,12 @@ .\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. -.TH CHECK "1" "September 2014" "Check accuracy of ICC profile, Version 1.6.3" "User Commands" +.TH CHECK "1" "September 2014" "profcheck" "User Commands" .SH NAME Check \- Check accuracy of ICC profile. .SH DESCRIPTION Check accuracy of ICC profile, Version 1.6.3 -Author: Graeme W. Gill, licensed under the AGPL Version 3 -usage: profcheck [\-options] data.ti3 iccprofile.icm -.TP -\fB\-v\fR [level] -Verbosity level (default 1), 2 to print each DE -.TP -\fB\-c\fR -Show CIE94 delta E values -.TP -\fB\-k\fR -Show CIEDE2000 delta E values -.TP -\fB\-w\fR -create VRML visualisation (iccprofile.wrl) -.TP -\fB\-x\fR -Use VRML axes -.TP -\fB\-m\fR -Make VRML lines a minimum of 0.5 -.TP -\fB\-e\fR -Color vectors according to delta E -.HP -\fB\-d\fR devval1,deval2,devvalN -.IP -Specify a device value to sort against -.TP -\fB\-p\fR -Sort device value by PCS (Lab) target -.TP -\fB\-f\fR [illum] -Use Fluorescent Whitening Agent compensation [opt. simulated inst. illum.: -.IP -M0, M1, M2, A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp] -.TP -\fB\-i\fR illum -Choose illuminant for computation of CIE XYZ from spectral data & FWA: -.IP -A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp -.TP -\fB\-o\fR observ -Choose CIE Observer for spectral data: -.IP -1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2 -.TP -\fB\-I\fR intent -r = relative colorimetric, a = absolute (default) -.TP -data.ti3 -Test data file -.TP -iccprofile.icm -Profile to check against -.PP -Author: Graeme W. Gill, licensed under the AGPL Version 3 -usage: profcheck [\-options] data.ti3 iccprofile.icm +.SH SYNOPSIS +.B profcheck +.RB [\-options]\ data.ti3\ iccprofile.icm .TP \fB\-v\fR [level] Verbosity level (default 1), 2 to print each DE diff --git a/debian/man/refine.1 b/debian/man/refine.1 index 18845db..8c05df5 100644 --- a/debian/man/refine.1 +++ b/debian/man/refine.1 @@ -1,64 +1,12 @@ .\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. -.TH CREATE "1" "September 2014" "Create abstract correction profile given table of absolute CIE correction values, Version 1.6.3" "User Commands" +.TH CREATE "1" "September 2014" "refine" "User Commands" .SH NAME Create \- Create abstract correction profile given table of absolute CIE correction values. .SH DESCRIPTION Create abstract correction profile given table of absolute CIE correction values, Version 1.6.3 -Author: Graeme W. Gill, licensed under the AGPL Version 3 -Diagnostic: Too few arguments -usage: refine [\-options] cietarget ciecurrent [outdevicc] [inabs] outabs -.TP -\fB\-v\fR -Verbose -.TP -\fB\-c\fR -Create initial abstract correction profile -.TP -\fB\-g\fR -Don't impose output device gamut limit -.TP -\fB\-r\fR res -Set abstract profile clut resolution (default 33) -.TP -\fB\-d\fR factor -Override default damping factor (default 0.950000, then 0.700000) -.TP -\fB\-R\fR -Aim for white point relative match rather than absolute -.TP -\fB\-f\fR [illum] -Use Fluorescent Whitening Agent compensation [opt. simulated inst. illum.: -.IP -M0, M1, M2, A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp] -.TP -\fB\-i\fR illum -Choose illuminant for computation of CIE XYZ from spectral data & FWA: -.IP -A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp -.TP -\fB\-o\fR observ -Choose CIE Observer for spectral data: -.IP -1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2 -.TP -cietarget -Target CIE or spectral values, CGATS file (e.g. .ti3) -.TP -ciecurrent -Actual CIE or spectral values, CGATS file (e.g. .ti3) -.TP -[outdevicc] -Output device ICC profile to set gamut limit (not used if \fB\-g\fR) -.TP -[inabs] -Previous abstract correction ICC profile (not used if \fB\-c\fR) -.TP -outabs -Created/refined abstract correction ICC profile -.PP -Author: Graeme W. Gill, licensed under the AGPL Version 3 -Diagnostic: Too few arguments -usage: refine [\-options] cietarget ciecurrent [outdevicc] [inabs] outabs +.SH SYNOPSIS +.B refine +.RB [\-options]\ cietarget\ ciecurrent\ [outdevicc]\ [inabs]\ outabs .TP \fB\-v\fR Verbose diff --git a/debian/man/revfix.1 b/debian/man/revfix.1 index e741657..b6cc94c 100644 --- a/debian/man/revfix.1 +++ b/debian/man/revfix.1 @@ -1,54 +1,12 @@ .\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. -.TH INVERT "1" "September 2014" "Invert AtoB1 to make BtoA1 for CMYK profiles, Version 1.6.3" "User Commands" +.TH INVERT "1" "September 2014" "revfix" "User Commands" .SH NAME Invert \- Invert AtoB1 to make BtoA1 for CMYK profiles. .SH DESCRIPTION Invert AtoB1 to make BtoA1 for CMYK profiles, Version 1.6.3 -Author: Graeme W. Gill, licensed under the AGPL Version 3 -usage: revfix [\-options] iccin iccout -.TP -\fB\-v\fR -Verbose -.TP -\fB\-0\fR -Process perceptual -.TP -\fB\-1\fR -Process absolute/relative colorimetric -.TP -\fB\-2\fR -Process saturation -.TP -\fB\-r\fR res -Override BtoA1 Clut res -.TP -\fB\-k\fR [ezhxr] -e = same K as existing BtoA table (def) -z = zero, h = 0.5 K, x = max K, r = ramp K -.HP -\fB\-k\fR p stle stpo enle enpo shape -.IP -p = curve parameters -stle: K level at White 0.0 \- 1.0 -stpo: start point of transition Wh 0.0 \- Bk 1.0 -enpo: End point of transition Wh 0.0 \- Bk 1.0 -enle: K level at Black 0.0 \- 1.0 -shape: 1.0 = straight, 0.0\-1.0 concave, 1.0\-2.0 convex -.TP -\fB\-K\fR parameters -Same as \fB\-k\fR, but target is K locus rather than K value itself -.TP -\fB\-l\fR tlimit -set total ink limit, 0 \- 400% (estimate by default) -.TP -\fB\-L\fR klimit -set black ink limit, 0 \- 100% (estimate by default) -.TP -\fB\-p\fR absprof -Include abstract profile in output tables -.PP -Author: Graeme W. Gill, licensed under the AGPL Version 3 -usage: revfix [\-options] iccin iccout +.SH SYNOPSIS +.B revfix +.RB [\-options]\ iccin\ iccout .TP \fB\-v\fR Verbose diff --git a/debian/man/scanin.1 b/debian/man/scanin.1 index 663c69b..43c1026 100644 --- a/debian/man/scanin.1 +++ b/debian/man/scanin.1 @@ -1,133 +1,32 @@ .\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. -.TH SCANIN, "1" "September 2014" "Scanin, Version 1.6.3" "User Commands" +.TH SCANIN, "1" "September 2014" "scanin" "User Commands" .SH NAME Scanin, \- Scanin. .SH DESCRIPTION Scanin, Version 1.6.3 -Author: Graeme W. Gill, licensed under the AGPL Version 3 -.PP -usage: scanin [options] input.tif recogin.cht valin.cie [diag.tif] -.IP -:\- inputs 'input.tif' and outputs scanner 'input.ti3', or -.PP -usage: scanin \fB\-g\fR [options] input.tif recogout.cht [diag.tif] -.IP -:\- outputs file 'recogout.cht', or -.PP -usage: scanin \fB\-o\fR [options] input.tif recogin.cht [diag.tif] -.IP -:\- outputs file 'input.val', or -.PP -usage: scanin \fB\-c\fR [options] input.tif recogin.cht scanprofile.[icc|mpp] pbase [diag.tif] -.IP -:\- inputs pbase.ti2 and outputs printer pbase.ti3, or -.PP -usage: scanin \fB\-r\fR [options] input.tif recogin.cht pbase [diag.tif] -.IP -:\- inputs pbase.ti2+.ti3 and outputs pbase.ti3 -.TP -\fB\-g\fR -Generate a chart reference (.cht) file -.TP -\fB\-o\fR -Output patch values in .val file -.TP -\fB\-c\fR -Use image to measure color to convert printer pbase .ti2 to .ti3 -.TP -\fB\-ca\fR -Same as \fB\-c\fR, but accumulates more values to pbase .ti3 -from subsequent pages -.TP -\fB\-r\fR -Replace device values in pbase .ti2/.ti3 -Default is to create a scanner .ti3 file -.TP -\fB\-F\fR x1,y1,x2,y2,x3,y3,x4,y4 -Don't auto recognize, locate using four fiducual marks -.TP -\fB\-p\fR -Compensate for perspective distortion -.TP -\fB\-a\fR -Recognise chart in normal orientation only (\fB\-A\fR fallback as is) -Default is to recognise all possible chart angles -.TP -\fB\-m\fR -Return true mean (default is robust mean) -.TP -\fB\-G\fR gamma -Approximate gamma encoding of image -.TP -\fB\-v\fR [n] -Verbosity level 0\-9 -.TP -\fB\-d\fR [ihvglLIcrsonap] -Generate diagnostic output (try \fB\-dipn\fR) -.TP -i -diag \- B&W of input image -.TP -h -diag \- Horizontal edge/tick detection -.TP -v -diag \- Vertical edge/tick detection -.TP -g -diag \- Groups detected -.TP -l -diag \- Lines detected -.TP -L -diag \- All lines detected -.TP -I -diag \- lines used to improve fit -.TP -c -diag \- lines perspective corrected -.TP -r -diag \- lines rotated -.TP -s -diag \- diagnostic sample boxes rotated -.TP -o -diag \- sample box outlines -.TP -n -diag \- sample box names -.TP -a -diag \- sample box areas -.TP -p -diag \- pixel areas sampled -.HP -\fB\-O\fR outputfile Override the default output filename & extension. -.PP -Author: Graeme W. Gill, licensed under the AGPL Version 3 -.PP -usage: scanin [options] input.tif recogin.cht valin.cie [diag.tif] +.SH SYNOPSIS +.B scanin +.RB [options]\ input.tif\ recogin.cht\ valin.cie\ [diag.tif] .IP :\- inputs 'input.tif' and outputs scanner 'input.ti3', or .PP -usage: scanin \fB\-g\fR [options] input.tif recogout.cht [diag.tif] +.B scanin +.RB \fB\-g\fR [options]\ input.tif\ recogout.cht\ [diag.tif] .IP :\- outputs file 'recogout.cht', or .PP -usage: scanin \fB\-o\fR [options] input.tif recogin.cht [diag.tif] +.B scanin +.RB \fB\-o\fR [options]\ input.tif\ recogin.cht\ [diag.tif] .IP :\- outputs file 'input.val', or .PP -usage: scanin \fB\-c\fR [options] input.tif recogin.cht scanprofile.[icc|mpp] pbase [diag.tif] +.B scanin +.RB \fB\-c\fR [options]\ input.tif\ recogin.cht\ scanprofile.[icc|mpp]\ pbase\ [diag.tif] .IP :\- inputs pbase.ti2 and outputs printer pbase.ti3, or .PP -usage: scanin \fB\-r\fR [options] input.tif recogin.cht pbase [diag.tif] +.B scanin +.RB \fB\-r\fR [options]\ input.tif\ recogin.cht\ pbase\ [diag.tif] .IP :\- inputs pbase.ti2+.ti3 and outputs pbase.ti3 .TP diff --git a/debian/man/spec2cie.1 b/debian/man/spec2cie.1 index 9bd7068..79f23b7 100644 --- a/debian/man/spec2cie.1 +++ b/debian/man/spec2cie.1 @@ -1,5 +1,5 @@ .\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. -.TH CONVERT "1" "September 2014" "Convert spectral .ti3 file, Version 1.6.3" "User Commands" +.TH CONVERT "1" "September 2014" "spec2cie" "User Commands" .SH NAME Convert \- Convert spectral .ti3 file. .SH SYNOPSIS @@ -7,46 +7,9 @@ Convert \- Convert spectral .ti3 file. [\fIoptions\fR] \fIinput.ti3 output.ti3\fR .SH DESCRIPTION Convert spectral .ti3 file, Version 1.6.3 -Author: Gerhard Fuernkranz, licensed under the AGPL Version 3 -.TP -\fB\-v\fR -Verbose mode -.TP -\fB\-I\fR illum -Override actual instrument illuminant in .ti3 file: -.IP -A, C, D50, D50M2, D65, F5, F8, F10 or file.sp -(only used in conjunction with \fB\-f\fR) -.TP -\fB\-f\fR [illum] -Use Fluorescent Whitening Agent compensation [simulated inst. illum.: -.IP -M0, M1, M2, A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp] -.TP -\fB\-i\fR illum -Choose illuminant for computation of CIE XYZ from spectral data & FWA: -A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp -.TP -\fB\-o\fR observ -Choose CIE Observer for spectral data: -.IP -1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2 -.TP -\fB\-n\fR -Don't output spectral values -.TP -\fB\-p\fR -Plot each values spectrum -.TP -input.ti3 -Measurement file -.TP -output.ti3 -Converted measurement file -.PP -Author: Gerhard Fuernkranz, licensed under the AGPL Version 3 -.PP -Usage: spec2cie [options] input.ti3 output.ti3 +.SH SYNOPSIS +.B spec2cie +.RB [options]\ input.ti3\ output.ti3 .TP \fB\-v\fR Verbose mode diff --git a/debian/man/specplot.1 b/debian/man/specplot.1 index b794adc..d4426f3 100644 --- a/debian/man/specplot.1 +++ b/debian/man/specplot.1 @@ -1,33 +1,12 @@ .\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. -.TH PLOT "1" "September 2014" "Plot spectrum and calculate CCT and VCT" "User Commands" +.TH PLOT "1" "September 2014" "specplot" "User Commands" .SH NAME Plot \- Plot spectrum and calculate CCT and VCT. .SH DESCRIPTION Plot spectrum and calculate CCT and VCT -Author: Graeme W. Gill -usage: specplot [infile.sp] -.TP -\fB\-v\fR -verbose -.TP -\fB\-c\fR -combine multiple files into one plot -.TP -\fB\-z\fR -don't make range cover zero -.TP -\fB\-u\fR level -plot effect of adding estimated UV level -.TP -\fB\-U\fR -plot effect of adding range of estimated UV level -.TP -[infile.sp ...] -spectrum files to plot -default is all built in illuminants -.PP -Author: Graeme W. Gill -usage: specplot [infile.sp] +.SH SYNOPSIS +.B specplot +.RB [infile.sp] .TP \fB\-v\fR verbose diff --git a/debian/man/splitti3.1 b/debian/man/splitti3.1 index f08b866..4be8b4e 100644 --- a/debian/man/splitti3.1 +++ b/debian/man/splitti3.1 @@ -1,38 +1,12 @@ .\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. -.TH SPLIT "1" "September 2014" "Split a .ti3 into two, Version 1.6.3" "User Commands" +.TH SPLIT "1" "September 2014" "splitcgats" "User Commands" .SH NAME Split \- Split a .ti3 into two. .SH DESCRIPTION Split a .ti3 into two, Version 1.6.3 -Author: Graeme W. Gill, licensed under the AGPL Version 3 -usage: splitcgats [\-options] input.ti3 output1.ti3 output2.ti3 -.TP -\fB\-v\fR -Verbose \- print each patch value -.TP -\fB\-n\fR no -Put no sets in first file, and balance in second file. -.TP -\fB\-p\fR percent -Put percent% sets in first file, and balance in second file. (def. 50%) -.TP -\fB\-w\fR -Put white patches in both files. -.TP -\fB\-r\fR seed -Use given random seed. -.TP -input.ti3 -File to be split up. -.TP -output1.ti3 -First output file -.TP -output2.ti3 -Second output file -.PP -Author: Graeme W. Gill, licensed under the AGPL Version 3 -usage: splitcgats [\-options] input.ti3 output1.ti3 output2.ti3 +.SH SYNOPSIS +.B splitcgats +.RB [\-options]\ input.ti3\ output1.ti3\ output2.ti3 .TP \fB\-v\fR Verbose \- print each patch value diff --git a/debian/man/spotread.1 b/debian/man/spotread.1 index fea84c6..050f708 100644 --- a/debian/man/spotread.1 +++ b/debian/man/spotread.1 @@ -1,130 +1,12 @@ .\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. -.TH MEASURE "1" "September 2014" "Measure spot values, Version 1.6.3" "User Commands" +.TH MEASURE "1" "September 2014" "spotread" "User Commands" .SH NAME Measure \- Read Print Spot values. .SH DESCRIPTION Measure spot values, Version 1.6.3 -Author: Graeme W. Gill, licensed under the GPL Version 2 or later -Diagnostic: Flag \fB\-\-\fR not recognised -usage: spotread [\-options] [logfile] -.TP -\fB\-v\fR -Verbose mode -.TP -\fB\-s\fR -Print spectrum for each reading -.TP -\fB\-S\fR -Plot spectrum for each reading -.TP -\fB\-c\fR listno -Set communication port from the following list (default 1) -.IP -** No ports found ** -.TP -\fB\-t\fR -Use transmission measurement mode -.TP -\fB\-e\fR -Use emissive measurement mode (absolute results) -.TP -\fB\-eb\fR -Use display white brightness relative measurement mode -.TP -\fB\-ew\fR -Use display white point relative chromatically adjusted mode -.TP -\fB\-p\fR -Use telephoto measurement mode (absolute results) -.TP -\fB\-pb\fR -Use projector white brightness relative measurement mode -.TP -\fB\-pw\fR -Use projector white point relative chromatically adjusted mode -.TP -\fB\-a\fR -Use ambient measurement mode (absolute results) -.TP -\fB\-f\fR -Use ambient flash measurement mode (absolute results) -.TP -\fB\-I\fR illum -Set simulated instrument illumination using FWA (def \fB\-i\fR illum): -M0, M1, M2, A, C, D50, D50M2, D65, F5, F8, F10 or file.sp] -.TP -\fB\-i\fR illum -Choose illuminant for computation of CIE XYZ from spectral data & FWA: -A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp -.TP -\fB\-Q\fR observ -Choose CIE Observer for spectral data or CCSS instrument: -1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2 -(Choose FWA during operation) -.TP -\fB\-F\fR filter -Set filter configuration (if aplicable): -.TP -n -None -.TP -p -Polarising filter -.TP -6 -D65 -.TP -u -U.V. Cut -.TP -\fB\-E\fR extrafilterfile -Apply extra filter compensation file -.TP -\fB\-x\fR -Display Yxy instead of Lab -.TP -\fB\-h\fR -Display LCh instead of Lab -.TP -\fB\-V\fR -Show running average and std. devation from ref. -.TP -\fB\-T\fR -Display correlated color temperatures and CRI -.TP -\fB\-N\fR -Disable auto calibration of instrument -.TP -\fB\-H\fR -Start in high resolution spectrum mode (if available) -.TP -\fB\-X\fR file.ccmx -Apply Colorimeter Correction Matrix -.TP -\fB\-X\fR file.ccss -Use Colorimeter Calibration Spectral Samples for calibration -.TP -\fB\-Y\fR r|n -Override refresh, non\-refresh display mode -.TP -\fB\-Y\fR R:rate -Override measured refresh rate with rate Hz -.TP -\fB\-Y\fR A -Use non\-adaptive integration time mode (if available). -.TP -\fB\-W\fR n|h|x -Override serial port flow control: n = none, h = HW, x = Xon/Xoff -.TP -\fB\-D\fR [level] -Print debug diagnostics to stderr -.TP -logfile -Optional file to save reading results as text -.PP -Author: Graeme W. Gill, licensed under the GPL Version 2 or later -Diagnostic: Flag \fB\-\-\fR not recognised -usage: spotread [\-options] [logfile] +.SH SYNOPSIS +.B spotread +.RB [\-options]\ [logfile] .TP \fB\-v\fR Verbose mode diff --git a/debian/man/synthcal.1 b/debian/man/synthcal.1 index d63ef55..5fce9da 100644 --- a/debian/man/synthcal.1 +++ b/debian/man/synthcal.1 @@ -1,52 +1,12 @@ .\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. -.TH CREATE "1" "September 2014" "Create a synthetic calibration file, Version 1.6.3" "User Commands" +.TH CREATE "1" "September 2014" "synthcal" "User Commands" .SH NAME Create \- Create a synthetic calibration file. .SH DESCRIPTION Create a synthetic calibration file, Version 1.6.3 -Author: Graeme W. Gill, licensed under the AGPL Version 3 -usage: synthcal [\-options] outfile -.TP -\fB\-t\fR N -i = input, o = output, d = display (default) -.TP -\fB\-d\fR col_comb -choose colorant combination from the following (default 3): -0: Print grey -1: Video grey -2: Print RGB -3: Video RGB -4: CMYK -5: CMY -6: CMYK + Light CM -7: CMYK + Light CMK -8: CMYK + Red + Blue -9: CMYK + Orange + Green -10: CMYK + Light CMK + Light Light K -11: CMYK + Orange + Green + Light CM -12: CMYK + Light CM + Medium CM -.TP -\fB\-D\fR colorant -Add or delete colorant from combination: -(Use \-?? to list known colorants) -.TP -\fB\-o\fR o1,o2,o3, -Set non\-linear curve offset (default 0.0) -.TP -\fB\-s\fR s1,s2,s3, -Set non\-linear curve scale (default 1.0) -.TP -\fB\-p\fR p1,p2,p3, -Set non\-linear curve powers (default 1.0) -.TP -\fB\-E\fR description -Set the profile dEscription string -.TP -outfile -Base name for output .cal file -.PP -Author: Graeme W. Gill, licensed under the AGPL Version 3 -usage: synthcal [\-options] outfile +.SH SYNOPSIS +.B synthcal +.RB [\-options]\ outfile .TP \fB\-t\fR N i = input, o = output, d = display (default) diff --git a/debian/man/synthread.1 b/debian/man/synthread.1 index 444071e..9a52806 100644 --- a/debian/man/synthread.1 +++ b/debian/man/synthread.1 @@ -1,52 +1,12 @@ .\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. -.TH SYNTHETIC "1" "September 2014" "Synthetic device model test chart reader - Version 1.6.3" "User Commands" +.TH SYNTHETIC "1" "September 2014" "synthread" "User Commands" .SH NAME Synthetic \- Synthetic device model test chart reader. .SH DESCRIPTION Synthetic device model test chart reader \- Version 1.6.3 -Author: Graeme W. Gill, licensed under the AGPL Version 3 -Error 'Unrecognised flag' -usage: synthread [\-v] [\-s] [separation.icm] profile.[icc|mpp|ti3] outfile -.TP -\fB\-v\fR -Verbose mode -.TP -\fB\-p\fR -Use separation profile -.TP -\fB\-l\fR -Construct and output in Lab rather than XYZ -.TP -\fB\-i\fR p1,p2,p3, -Set input channel curve powers (default 1.0) -.TP -\fB\-k\fR x1:y1,x2:y2,x3:y2 -Set input channel inflection points (default 0.5,0.5) -.TP -\fB\-o\fR p1,p2,p3, -Set output channel curve powers (default 1.0) -.TP -\fB\-r\fR level -Add average random deviation of % to input device values (after sep.) -.TP -\fB\-R\fR level -Add average random deviation of % to output PCS values -.TP -\fB\-u\fR -Make random deviations have uniform distributions rather than normal -.TP -\fB\-b\fR L,a,b -Scale black point to target Lab value -.TP -[separation.icm] -Device link separation profile -.IP -profile.[icc|mpp|ti3] ICC, MPP profile or TI3 to use -outfile Base name for input[ti1]/output[ti3] file -.PP -Author: Graeme W. Gill, licensed under the AGPL Version 3 -Error 'Unrecognised flag' -usage: synthread [\-v] [\-s] [separation.icm] profile.[icc|mpp|ti3] outfile +.SH SYNOPSIS +.B synthread +.RB [\-v]\ [\-s]\ [separation.icm]\ profile.[icc|mpp|ti3]\ outfile .TP \fB\-v\fR Verbose mode diff --git a/debian/man/targen.1 b/debian/man/targen.1 index 89e5b95..6ad7229 100644 --- a/debian/man/targen.1 +++ b/debian/man/targen.1 @@ -1,121 +1,12 @@ .\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. -.TH GENERATE "1" "September 2014" "Generate Target deviceb test chart color values, Version 1.6.3" "User Commands" +.TH GENERATE "1" "September 2014" "targen" "User Commands" .SH NAME Generate \- Generate Target deviceb test chart color values. .SH DESCRIPTION Generate Target deviceb test chart color values, Version 1.6.3 -Author: Graeme W. Gill, licensed under the AGPL Version 3 -usage: targen [options] outfile -.IP -Diagnostic: Usage requested -.TP -\fB\-v\fR [level] -Verbose mode [optional level 1..N] -.TP -\fB\-d\fR col_comb -choose colorant combination from the following: -0: Print grey -1: Video grey -2: Print RGB -3: Video RGB -4: CMYK -5: CMY -6: CMYK + Light CM -7: CMYK + Light CMK -8: CMYK + Red + Blue -9: CMYK + Orange + Green -10: CMYK + Light CMK + Light Light K -11: CMYK + Orange + Green + Light CM -12: CMYK + Light CM + Medium CM -.TP -\fB\-D\fR colorant -Add or delete colorant from combination: -(Use \-?? to list known colorants) -.TP -\fB\-G\fR -Generate good optimized points rather than Fast -.TP -\fB\-e\fR patches -White test patches (default 4) -.TP -\fB\-B\fR patches -Black test patches (default 4 Grey/RGB, else 0) -.TP -\fB\-s\fR steps -Single channel steps (default grey 50, color 0) -.TP -\fB\-g\fR steps -Grey axis RGB or CMY steps (default 0) -.TP -\fB\-m\fR steps -Multidimensional device space cube steps (default 0) -.TP -\fB\-b\fR steps -Multidimensional body centered cubic steps (default 0) -.TP -\fB\-f\fR patches -Add iterative & adaptive full spread patches to total (default grey 0, color 836) -Default is Optimised Farthest Point Sampling (OFPS) -.TP -\fB\-t\fR -Use incremental far point for full spread -.TP -\fB\-r\fR -Use device space random for full spread -.TP -\fB\-R\fR -Use perceptual space random for full spread -.TP -\fB\-q\fR -Use device space\-filling quasi\-random for full spread -.TP -\fB\-Q\fR -Use perceptual space\-filling quasi\-random for full spread -.TP -\fB\-i\fR -Use device space body centered cubic grid for full spread -.TP -\fB\-I\fR -Use perceptual space body centered cubic grid for full spread -.TP -\fB\-a\fR angle -Simplex grid angle 0.0 \- 0.5 for B.C.C. grid, default 0.333300 -.TP -\fB\-A\fR adaptation -Degree of adaptation of OFPS 0.0 \- 1.0 (default 0.1, \fB\-c\fR profile used 1.0) -.TP -\fB\-l\fR ilimit -Total ink limit in % (default = none) -.TP -\fB\-p\fR power -Optional power\-like value applied to all device values. -.TP -\fB\-c\fR profile -Optional device ICC or MPP pre\-conditioning profile filename -(Use "none" to turn off any conditioning) -.TP -\fB\-N\fR nemphasis -Degree of neutral axis patch concentration 0.0\-1.0 (default 0.50) -.TP -\fB\-V\fR demphasis -Degree of dark region patch concentration 1.0\-4.0 (default 1.00 = none) -.TP -\fB\-F\fR L,a,b,rad -Filter out samples outside Lab sphere. -.TP -\fB\-w\fR -Dump diagnostic outfilel.wrl file (Lab locations) -.TP -\fB\-W\fR -Dump diagnostic outfiled.wrl file (Device locations) -.TP -outfile -Base name for output(.ti1) -.PP -Author: Graeme W. Gill, licensed under the AGPL Version 3 -usage: targen [options] outfile -.IP -Diagnostic: Usage requested +.SH SYNOPSIS +.B targen +.RB [options]\ outfile .TP \fB\-v\fR [level] Verbose mode [optional level 1..N] diff --git a/debian/man/tiffgamut.1 b/debian/man/tiffgamut.1 index 23713fe..760c72f 100644 --- a/debian/man/tiffgamut.1 +++ b/debian/man/tiffgamut.1 @@ -1,95 +1,12 @@ .\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. -.TH CREATE "1" "September 2014" "Create VRML image of the gamut surface of a TIFF or JPEG, Version 1.6.3" "User Commands" +.TH CREATE "1" "September 2014" "tiffgamut" "User Commands" .SH NAME Create \- Create VRML image of the gamut surface of a TIFF. .SH DESCRIPTION Create VRML image of the gamut surface of a TIFF or JPEG, Version 1.6.3 -Author: Graeme W. Gill, licensed under the AGPL Version 3 -usage: tiffgamut [\-v level] [profile.icm | embedded.tif/jpg] infile1.tif/jpg [infile2.tif/jpg ...] -.TP -\fB\-v\fR -Verbose -.TP -\fB\-d\fR sres -Surface resolution details 1.0 \- 50.0 -.TP -\fB\-w\fR -emit VRML .wrl file as well as CGATS .gam file -.TP -\fB\-n\fR -Don't add VRML axes or white/black point -.TP -\fB\-k\fR -Add markers for prim. & sec. "cusp" points -.TP -\fB\-f\fR perc -Filter by popularity, perc = percent to use -.TP -\fB\-i\fR intent -p = perceptual, r = relative colorimetric, -s = saturation, a = absolute (default), d = profile default -.TP -\fB\-p\fR oride -l = Lab_PCS (default), j = CIECAM02 Appearance Jab -.TP -\fB\-o\fR order -n = normal (priority: lut > matrix > monochrome) -r = reverse (priority: monochrome > matrix > lut) -.TP -\fB\-c\fR viewcond -set appearance mode and viewing conditions for CIECAM02, -either an enumerated choice, or a parameter:value changes -.IP -pp \- Practical Reflection Print (ISO\-3664 P2) -pe \- Print evaluation environment (CIE 116\-1995) -pc \- Critical print evaluation environment (ISO\-3664 P1) -mt \- Monitor in typical work environment -mb \- Bright monitor in bright work environment -md \- Monitor in darkened work environment -jm \- Projector in dim environment -jd \- Projector in dark environment -tv \- Television/Film Studio -.IP -pcd \- Photo CD \- original scene outdoors -.IP -ob \- Original scene \- Bright Outdoors -cx \- Cut Sheet Transparencies on a viewing box -.TP -s:surround -n = auto, a = average, m = dim, d = dark, -c = transparency (default average) -.TP -w:X:Y:Z -Adapted white point as XYZ (default media white) -.TP -w:x:y -Adapted white point as x, y -.TP -a:adaptation -Adaptation luminance in cd.m^2 (default 50.0) -.TP -b:background -Background % of image luminance (default 20) -.TP -l:imagewhite -Image white in cd.m^2 if surround = auto (default 250) -.TP -f:flare -Flare light % of image luminance (default 0) -.TP -g:glare -Flare light % of ambient (default 1) -.TP -g:X:Y:Z -Flare color as XYZ (default media white, Abs: D50) -.TP -g:x:y -Flare color as x, y -.HP -\fB\-O\fR outputfile Override the default output filename. -.PP -Author: Graeme W. Gill, licensed under the AGPL Version 3 -usage: tiffgamut [\-v level] [profile.icm | embedded.tif/jpg] infile1.tif/jpg [infile2.tif/jpg ...] +.SH SYNOPSIS +.B tiffgamut +.RB [\-v\ level]\ [profile.icm\ |\ embedded.tif/jpg]\ infile1.tif/jpg\ [infile2.tif/jpg\ ...] .TP \fB\-v\fR Verbose diff --git a/debian/man/timage.1 b/debian/man/timage.1 index 7a30c33..2ac441a 100644 --- a/debian/man/timage.1 +++ b/debian/man/timage.1 @@ -1,38 +1,12 @@ .\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. -.TH CREATE "1" "September 2014" "Create test images, default hex RGB surface and wedge, Version 1.6.3" "User Commands" +.TH CREATE "1" "September 2014" "timage" "User Commands" .SH NAME Create \- Create test images, default hex RGB surface and wedge. .SH DESCRIPTION Create test images, default hex RGB surface and wedge, Version 1.6.3 -Author: Graeme W. Gill, licensed under the AGPL Version 3 -usage: timage [\-options] outfile.tif -.TP -\fB\-t\fR -Generate rectangular gamut boundary test chart -.TP -\fB\-p\fR steps -Generate a colorspace step chart with L* steps^2 -.TP -\fB\-r\fR res -Resolution in DPI (default 200) -.TP -\fB\-s\fR -Smooth blend -.TP -\fB\-x\fR -16 bit output -.TP -\fB\-4\fR -CMYK output -.TP -\fB\-g\fR prop -Percentage towards grey (default 0%) -.TP -outfile.tif -Profile to check against -.PP -Author: Graeme W. Gill, licensed under the AGPL Version 3 -usage: timage [\-options] outfile.tif +.SH SYNOPSIS +.B timage +.RB [\-options]\ outfile.tif .TP \fB\-t\fR Generate rectangular gamut boundary test chart diff --git a/debian/man/txt2ti3.1 b/debian/man/txt2ti3.1 index 07d22b7..f0c44c4 100644 --- a/debian/man/txt2ti3.1 +++ b/debian/man/txt2ti3.1 @@ -1,40 +1,12 @@ .\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. -.TH CONVERT "1" "September 2014" "Convert Gretag/Logo or X-Rite ColorPport raw RGB or CMYK device profile data to Argyll CGATS data, Version 1.6.3" "User Commands" +.TH CONVERT "1" "September 2014" "txt2ti3" "User Commands" .SH NAME Convert \- Convert Gretag/Logo or X-Rite ColorPport raw RGB or CMYK device profile data to Argyll CGATS data. .SH DESCRIPTION Convert Gretag/Logo or X\-Rite ColorPport raw RGB or CMYK device profile data to Argyll CGATS data, Version 1.6.3 -Author: Graeme W. Gill, licensed under the AGPL Version 3 -error: Unknown flag -usage: txt2ti3 [\-v] [\-l limit] [devfile] infile [specfile] outbase -.TP -\fB\-2\fR -Create dummy .ti2 file as well -.TP -\fB\-l\fR limit -set ink limit, 0 \- 400% (default max in file) -.TP -\fB\-d\fR -Set type of device as Display, not Output -.TP -\fB\-i\fR -Set type of device as Input, not Output -.TP -[devfile] -Input Device CMYK target file (typically file.txt) -.TP -infile -Input CIE, Spectral or Device & Spectral file (typically file.txt) -.TP -[specfile] -Input Spectral file (typically file.txt) -.TP -outbasename -Output file basename for .ti3 and .ti2 -.PP -Author: Graeme W. Gill, licensed under the AGPL Version 3 -error: Unknown flag -usage: txt2ti3 [\-v] [\-l limit] [devfile] infile [specfile] outbase +.SH SYNOPSIS +.B txt2ti3 +.RB [\-v]\ [\-l\ limit]\ [devfile]\ infile\ [specfile]\ outbase .TP \fB\-2\fR Create dummy .ti2 file as well diff --git a/debian/man/viewgam.1 b/debian/man/viewgam.1 index ea27eca..83afd63 100644 --- a/debian/man/viewgam.1 +++ b/debian/man/viewgam.1 @@ -1,49 +1,12 @@ .\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. -.TH VIEW "1" "September 2014" "View gamuts Version 1.6.3" "User Commands" +.TH VIEW "1" "September 2014" "viewgam" "User Commands" .SH NAME View \- View gamuts. .SH DESCRIPTION View gamuts Version 1.6.3 -Author: Graeme W. Gill, licensed under the AGPL Version 3 -Diagnostic: Too few arguments, got 1 expect at least 2 -usage: viewgam { [\-c color] [\-t trans] [\-w|s] infile.gam } ... outfile.wrl -.TP -\fB\-c\fR color -Color to make gamut, r = red, g = green, b = blue -c = cyan, m = magenta, y = yellow, e = grey, w = white -n = natural color -.TP -\fB\-t\fR trans -Set transparency from 0.0 (opaque) to 1.0 (invisible) -.TP -\fB\-w\fR -Show as a wireframe -.TP -\fB\-s\fR -Show as a solid surace -.TP -infile.gam -Name of .gam file -Repeat above for each input file -.TP -\fB\-n\fR -Don't add Lab axes -.TP -\fB\-k\fR -Add markers for prim. & sec. "cusp" points -.TP -\fB\-i\fR -Compute and print intersecting volume of first 2 gamuts -.TP -\fB\-I\fR isect.gam -Same as \fB\-i\fR, but save intersection gamut to isect.gam -.TP -outfile.wrl -Name of output .wrl file -.PP -Author: Graeme W. Gill, licensed under the AGPL Version 3 -Diagnostic: Too few arguments, got 1 expect at least 2 -usage: viewgam { [\-c color] [\-t trans] [\-w|s] infile.gam } ... outfile.wrl +.SH SYNOPSIS +.B viewgam +.RB { [\-c\ color]\ [\-t\ trans]\ [\-w|s]\ infile.gam }\ ...\ outfile.wrl .TP \fB\-c\fR color Color to make gamut, r = red, g = green, b = blue diff --git a/debian/man/xicclu.1 b/debian/man/xicclu.1 index 98fdeff..b5aa7e9 100644 --- a/debian/man/xicclu.1 +++ b/debian/man/xicclu.1 @@ -1,169 +1,12 @@ .\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.44.1. -.TH LOOKUP "1" "September 2014" "Lookup ICC or CAL colors, Version 1.6.3" "User Commands" +.TH LOOKUP "1" "September 2014" "xicclu" "User Commands" .SH NAME Lookup \- Translate colors through an xicc. .SH DESCRIPTION Lookup ICC or CAL colors, Version 1.6.3 -Author: Graeme W. Gill, licensed under the AGPL Version 3 -usage: xicclu [\-options] profile_or_cal -Diagnostic: Unknown flag -.TP -\fB\-v\fR level -Verbosity level 0 \- 2 (default = 1) -.TP -\fB\-g\fR -Plot slice instead of looking colors up. (Default white to black) -.TP -\fB\-G\fR s:L:a:b -Override plot slice start with Lab or Jab co\-ordinate -.TP -\fB\-G\fR e:L:a:b -Override plot slice end with Lab or Jab co\-ordinate -.TP -\fB\-f\fR function -f = forward, b = backwards, g = gamut, p = preview -if = inverted forward, ib = inverted backwards -.TP -\fB\-i\fR intent -a = absolute, r = relative colorimetric -p = perceptual, s = saturation -.TP -\fB\-o\fR order -n = normal (priority: lut > matrix > monochrome) -r = reverse (priority: monochrome > matrix > lut) -.TP -\fB\-p\fR oride -x = XYZ_PCS, X = XYZ * 100, l = Lab_PCS, L = LCh, y = Yxy -j = CIECAM02 Appearance Jab, J = CIECAM02 Appearance JCh -.TP -\fB\-s\fR scale -Scale device range 0.0 \- scale rather than 0.0 \- 1.0 -.TP -\fB\-e\fR flag -Video encode device input as: -.TP -\fB\-E\fR flag -Video decode device output as: -.TP -n -normal 0..1 full range RGB levels (default) -.TP -t -(16\-235)/255 "TV" RGB levels -.TP -6 -Rec601 YCbCr SD (16\-235,240)/255 "TV" levels -.TP -7 -Rec709 1125/60Hz YCbCr HD (16\-235,240)/255 "TV" levels -.TP -5 -Rec709 1250/50Hz YCbCr HD (16\-235,240)/255 "TV" levels -.TP -2 -Rec2020 YCbCr UHD (16\-235,240)/255 "TV" levels -.TP -C -Rec2020 Constant Luminance YCbCr UHD (16\-235,240)/255 "TV" levels -.TP -\fB\-k\fR [zhxrlv] -Black value target: z = zero K, -h = 0.5 K, x = max K, r = ramp K (def.) -l = extra PCS input is portion of K locus -v = extra PCS input is K target value -.HP -\fB\-k\fR p stle stpo enpo enle shape -.IP -stle: K level at White 0.0 \- 1.0 -stpo: start point of transition Wh 0.0 \- Bk 1.0 -enpo: End point of transition Wh 0.0 \- Bk 1.0 -enle: K level at Black 0.0 \- 1.0 -shape: 1.0 = straight, 0.0\-1.0 concave, 1.0\-2.0 convex -.HP -\fB\-k\fR q stle0 stpo0 enpo0 enle0 shape0 stle2 stpo2 enpo2 enle2 shape2 -.IP -Transfer extra PCS input to dual curve limits -.TP -\fB\-K\fR parameters -Same as \fB\-k\fR, but target is K locus rather than K value itself -.TP -\fB\-l\fR tlimit -set total ink limit, 0 \- 400% (estimate by default) -.TP -\fB\-L\fR klimit -set black ink limit, 0 \- 100% (estimate by default) -.TP -\fB\-a\fR -show actual target values if clipped -.TP -\fB\-u\fR -warn if output PCS is outside the spectrum locus -.TP -\fB\-m\fR -merge output processing into clut -.TP -\fB\-b\fR -use CAM Jab for clipping -.TP -\fB\-c\fR viewcond -set viewing conditions for CIECAM97s, -either an enumerated choice, or a parameter:value changes -.IP -pp \- Practical Reflection Print (ISO\-3664 P2) -pe \- Print evaluation environment (CIE 116\-1995) -pc \- Critical print evaluation environment (ISO\-3664 P1) -mt \- Monitor in typical work environment -mb \- Bright monitor in bright work environment -md \- Monitor in darkened work environment -jm \- Projector in dim environment -jd \- Projector in dark environment -tv \- Television/Film Studio -.IP -pcd \- Photo CD \- original scene outdoors -.IP -ob \- Original scene \- Bright Outdoors -cx \- Cut Sheet Transparencies on a viewing box -.TP -s:surround -n = auto, a = average, m = dim, d = dark, -c = transparency (default average) -.TP -w:X:Y:Z -Adapted white point as XYZ (default media white, Abs: D50) -.TP -w:x:y -Adapted white point as x, y -.TP -a:adaptation -Adaptation luminance in cd.m^2 (default 50.0) -.TP -b:background -Background % of image luminance (default 20) -.TP -l:imagewhite -Image white in cd.m^2 if surround = auto (default 250) -.TP -f:flare -Flare light % of image luminance (default 0) -.TP -g:glare -Flare light % of ambient (default 1) -.TP -g:X:Y:Z -Flare color as XYZ (default media white, Abs: D50) -.TP -g:x:y -Flare color as x, y -.IP -The colors to be translated should be fed into standard in, -one input color per line, white space separated. -A line starting with a # will be ignored. -A line not starting with a number will terminate the program. -Use \fB\-v0\fR for just output colors. -.PP -Author: Graeme W. Gill, licensed under the AGPL Version 3 -usage: xicclu [\-options] profile_or_cal -Diagnostic: Unknown flag +.SH SYNOPSIS +.B xicclu +.RB [\-options]\ profile_or_cal .TP \fB\-v\fR level Verbosity level 0 \- 2 (default = 1) diff --git a/debian/patches/15_jam.patch b/debian/patches/15_jam.patch index a2cc91a..2ca1ae4 100644 --- a/debian/patches/15_jam.patch +++ b/debian/patches/15_jam.patch @@ -6,16 +6,13 @@ Last-Update: 2014-09-06 This patch header follows DEP-3: http://dep.debian.net/deps/dep3/ Index: trunk/Jamtop =================================================================== ---- trunk.orig/Jamtop 2014-09-06 10:26:03.492738912 +0200 -+++ trunk/Jamtop 2014-09-06 10:26:03.484738743 +0200 -@@ -108,13 +108,18 @@ - } +--- trunk.orig/Jamtop 2014-09-07 20:15:02.520225484 +0200 ++++ trunk/Jamtop 2014-09-07 20:15:43.909089670 +0200 +@@ -109,12 +109,16 @@ # See if we have a system TIFF library. --if ! $(BUILTIN_TIFF) && $(UNIX) { + if ! $(BUILTIN_TIFF) && $(UNIX) { - if [ GLOB /usr/include : tiffio.h ] || [ GLOB /usr/local/include : tiffio.h ] { -+if ! $(BUILDIN_TIFF) { -+if $(UNIX) { + if [ GLOB /usr/include : tiffio.h ] || [ GLOB /usr/local/include : tiffio.h ] + || [ GLOB /usr/include/x86_64-linux-gnu : tiffio.h ] + || [ GLOB /usr/include/i386-linux-gnu : tiffio.h ] { @@ -24,32 +21,24 @@ Index: trunk/Jamtop || [ GLOB /usr/lib/x86_64-linux-gnu : libtiff.so ] || [ GLOB /usr/lib/x86_64-linux-gnu : libtiff.a ] - || [ GLOB /usr/local/lib : libtiff.so ] || [ GLOB /usr/local/lib : libtiff.a ] { -+ || [ GLOB /usr/lib/lib/i386-linux-gnu : libtiff.so ] -+ || [ GLOB /usr/lib/lib/i386-linux-gnu : libtiff.a ] ++ || [ GLOB /usr/lib/i386-linux-gnu : libtiff.so ] ++ || [ GLOB /usr/lib/i386-linux-gnu : libtiff.a ] + || [ GLOB /usr/local/lib : libtiff.so ] || [ GLOB /usr/local/lib : libtiff.a ] { echo "Using system TIFF library" ; TIFFLIB = ; TIFFINC = ; -@@ -123,12 +128,13 @@ - } +@@ -124,6 +128,7 @@ } } -+} ++ # If nothing else, use Argyll supplied TIFF library if ! $(HAVE_TIFF) || $(BUILTIN_TIFF) { echo "Using Argyll TIFF library" ; -- TIFFLIB = ../tiff/libtiff.lib ; -- TIFFINC = ../tiff ; -+# TIFFLIB = ../tiff/libtiff.lib ; -+# TIFFINC = ../tiff ; - } - - # See if we have a system JPEG library. Index: trunk/Jambase =================================================================== ---- trunk.orig/Jambase 2014-09-06 10:26:03.492738912 +0200 -+++ trunk/Jambase 2014-09-06 10:26:03.484738743 +0200 +--- trunk.orig/Jambase 2014-09-07 20:15:02.520225484 +0200 ++++ trunk/Jambase 2014-09-07 20:15:02.512225317 +0200 @@ -880,7 +880,7 @@ # UNIX defaults @@ -68,20 +57,12 @@ Index: trunk/Jambase LINKOPTFLAG ?= -O ; # Affects creating .so's LINKSTRIPFLAG ?= -s ; LINKDEBUGFLAG ?= ; -Index: trunk/imdi/Makefile -=================================================================== ---- trunk.orig/imdi/Makefile 2014-09-06 10:26:03.492738912 +0200 -+++ trunk/imdi/Makefile 2014-09-06 10:26:03.484738743 +0200 -@@ -9,10 +9,10 @@ - # by uncommenting the appropriate line: - - # Microsoft VC++, WinNT setup --include Makefile.WNT -+#include Makefile.WNT - - # Generic UNIX setup --#include Makefile.UNIX -+include Makefile.UNIX - - # Apple OS X - #include Makefile.OSX +@@ -971,7 +971,7 @@ + RMDIR ?= $(RM) ; + RSH ?= rsh ; + SED ?= sed ; +- SHELLHEADER ?= "#!/bin/sh" ; ++ SHELLHEADER ?= "#!/bin/bash" ; + SHELLMODE ?= 755 ; + SLASH ?= / ; + STDHDRS ?= /usr/include ; diff --git a/debian/patches/15_jam.patch.org b/debian/patches/15_jam.patch.org new file mode 100644 index 0000000..f50b17a --- /dev/null +++ b/debian/patches/15_jam.patch.org @@ -0,0 +1,96 @@ +Description: Add multiarch support to jam files +Author: Jörg Frings Fürst +Forwarded: +Last-Update: 2014-09-06 +--- +This patch header follows DEP-3: http://dep.debian.net/deps/dep3/ +Index: trunk/Jamtop +=================================================================== +--- trunk.orig/Jamtop 2014-09-07 20:09:37.013428228 +0200 ++++ trunk/Jamtop 2014-09-07 20:09:37.005428060 +0200 +@@ -108,13 +108,18 @@ + } + + # See if we have a system TIFF library. +-if ! $(BUILTIN_TIFF) && $(UNIX) { +- if [ GLOB /usr/include : tiffio.h ] || [ GLOB /usr/local/include : tiffio.h ] { ++if ! $(BUILDIN_TIFF) { ++if $(UNIX) { ++ if [ GLOB /usr/include : tiffio.h ] || [ GLOB /usr/local/include : tiffio.h ] ++ || [ GLOB /usr/include/x86_64-linux-gnu : tiffio.h ] ++ || [ GLOB /usr/include/i386-linux-gnu : tiffio.h ] { + if [ GLOB /usr/lib : libtiff.so ] || [ GLOB /usr/lib : libtiff.a ] + || [ GLOB /usr/lib64 : libtiff.so ] || [ GLOB /usr/lib64 : libtiff.a ] + || [ GLOB /usr/lib/x86_64-linux-gnu : libtiff.so ] + || [ GLOB /usr/lib/x86_64-linux-gnu : libtiff.a ] +- || [ GLOB /usr/local/lib : libtiff.so ] || [ GLOB /usr/local/lib : libtiff.a ] { ++ || [ GLOB /usr/lib/lib/i386-linux-gnu : libtiff.so ] ++ || [ GLOB /usr/lib/lib/i386-linux-gnu : libtiff.a ] ++ || [ GLOB /usr/local/lib : libtiff.so ] || [ GLOB /usr/local/lib : libtiff.a ] { + echo "Using system TIFF library" ; + TIFFLIB = ; + TIFFINC = ; +@@ -123,12 +128,13 @@ + } + } + } ++} + + # If nothing else, use Argyll supplied TIFF library + if ! $(HAVE_TIFF) || $(BUILTIN_TIFF) { + echo "Using Argyll TIFF library" ; +- TIFFLIB = ../tiff/libtiff.lib ; +- TIFFINC = ../tiff ; ++# TIFFLIB = ../tiff/libtiff.lib ; ++# TIFFINC = ../tiff ; + } + + # See if we have a system JPEG library. +Index: trunk/Jambase +=================================================================== +--- trunk.orig/Jambase 2014-09-07 20:09:37.013428228 +0200 ++++ trunk/Jambase 2014-09-07 20:10:45.770864145 +0200 +@@ -880,7 +880,7 @@ + + # UNIX defaults + +- CCFLAGS ?= -DUNIX -D_THREAD_SAFE -pipe ; ++ CCFLAGS ?= $(CPPFLAGS) -g -DUNIX -D_THREAD_SAFE -pipe ; + CCOPTFLAG ?= -O2 ; + CCDEBUGFLAG ?= -g ; + CCPROFFLAG ?= ; +@@ -890,7 +890,7 @@ + CHGRP ?= chgrp ; + CHOWN ?= chown ; + LEX ?= lex ; +- LINKFLAGS ?= ; ++ LINKFLAGS ?= $(LDFLAGS) ; + LINKOPTFLAG ?= -O ; # Affects creating .so's + LINKSTRIPFLAG ?= -s ; + LINKDEBUGFLAG ?= ; +@@ -971,7 +971,7 @@ + RMDIR ?= $(RM) ; + RSH ?= rsh ; + SED ?= sed ; +- SHELLHEADER ?= "#!/bin/sh" ; ++ SHELLHEADER ?= "#!/bin/bash" ; + SHELLMODE ?= 755 ; + SLASH ?= / ; + STDHDRS ?= /usr/include ; +Index: trunk/imdi/Makefile +=================================================================== +--- trunk.orig/imdi/Makefile 2014-09-07 20:09:37.013428228 +0200 ++++ trunk/imdi/Makefile 2014-09-07 20:09:37.005428060 +0200 +@@ -9,10 +9,10 @@ + # by uncommenting the appropriate line: + + # Microsoft VC++, WinNT setup +-include Makefile.WNT ++#include Makefile.WNT + + # Generic UNIX setup +-#include Makefile.UNIX ++include Makefile.UNIX + + # Apple OS X + #include Makefile.OSX diff --git a/debian/rules b/debian/rules index 0f3d8ec..92d1baa 100755 --- a/debian/rules +++ b/debian/rules @@ -1,7 +1,7 @@ #!/usr/bin/make -f # hardening -#export DEB_BUILD_MAINT_OPTIONS = hardening=+all +export DEB_BUILD_MAINT_OPTIONS = hardening=+all #export DEB_LDFLAGS_MAINT_APPEND = -Wl,--as-needed -Wl,--no-undefined @@ -32,7 +32,7 @@ override_dh_auto_clean: rm -f $(CURDIR)/imdi/imdi_k.c rm -rf $(CURDIR)/debian/tmp/* [ ! -d $(CURDIR)/debian/tmp ] || rmdir --ignore-fail-on-non-empty $(CURDIR)/debian/tmp - dh_clean + dh_auto_clean override_dh_auto_install: jam $(JAMCMDLINE) dirs @@ -40,38 +40,33 @@ override_dh_auto_install: rm $(CURDIR)/debian/tmp/usr/bin/License.txt override_dh_installdocs: - dh_installdocs --link-doc=argyll-doc +# mkdir -p $(CURDIR)/doc/html +# mv -f $(CURDIR)/doc/* $(CURDIR)/doc/html + dh_installdocs -A --link-doc=argyll-doc + mkdir -p $(CURDIR)/debian/argyll-doc/usr/share/doc/argyll-doc/html + mv -f $(CURDIR)/debian/argyll-doc/usr/share/doc/argyll-doc/*.html $(CURDIR)/debian/argyll-doc/usr/share/doc/argyll-doc/html/ + mv -f $(CURDIR)/debian/argyll-doc/usr/share/doc/argyll-doc/*.jpg $(CURDIR)/debian/argyll-doc/usr/share/doc/argyll-doc/html/ + mv -f $(CURDIR)/debian/argyll-doc/usr/share/doc/argyll-doc/SG_*.txt $(CURDIR)/debian/argyll-doc/usr/share/doc/argyll-doc/html/ + mv -f $(CURDIR)/debian/argyll-doc/usr/share/doc/argyll-doc/*.gif $(CURDIR)/debian/argyll-doc/usr/share/doc/argyll-doc/html/ + mv -f $(CURDIR)/debian/argyll-doc/usr/share/doc/argyll-doc/*.xls $(CURDIR)/debian/argyll-doc/usr/share/doc/argyll-doc/html/ + mv -f $(CURDIR)/debian/argyll-doc/usr/share/doc/argyll-doc/*.zip $(CURDIR)/debian/argyll-doc/usr/share/doc/argyll-doc/html/ + mv -f $(CURDIR)/debian/argyll-doc/usr/share/doc/argyll-doc/ccmxs $(CURDIR)/debian/argyll-doc/usr/share/doc/argyll-doc/html/ rm -f $(CURDIR)/debian/argyll-doc/usr/share/doc/argyll-doc/License.txt rm -f $(CURDIR)/debian/argyll-doc/usr/share/doc/argyll-doc/License2.txt rm -f $(CURDIR)/debian/argyll-doc/usr/share/doc/argyll-doc/License3.txt -# rm $(CURDIR)/debian/argyll-doc/usr/share/doc/argyll-doc/License4.txt rm -f $(CURDIR)/debian/argyll-doc/usr/share/doc/argyll-doc/DocLicense.txt - + rm -f $(CURDIR)/debian/argyll-doc/usr/share/doc/argyll-doc/afiles override_dh_installchangelogs: dh_installchangelogs log.txt -#LIBICC_VERSION=$(shell awk -F= '/^LIBICC_VERSION=/ { print $$2 }' icc/Makefile.am) -#ARGYLL_VERSION=$(shell dpkg-parsechangelog | awk '/^Version:/ { print $$2 }') - -#override_dh_gencontrol: -## dh_gencontrol -plibicc2 -- -v$(LIBICC_VERSION)+argyll$(ARGYLL_VERSION) -## dh_gencontrol -plibicc-dev -- -v$(LIBICC_VERSION)+argyll$(ARGYLL_VERSION) -# dh_gencontrol --remaining-packages - -#build: firmware-package-builder/spyder2.tar.gz - -#firmware-package-builder/%.tar.gz: firmware-package-builder/argyll-firmware-% -# chmod +x $ debian/man/applycal.1 help2man -N --no-discard-stderr --name="Dump an ICC file in human readable form." debian/tmp/usr/bin/iccdump > debian/man/iccdump.1 help2man -N --no-discard-stderr --name="Translate colors through an ICC profile." debian/tmp/usr/bin/icclu > debian/man/icclu.1 - help2man -N --no-discard-stderr --name="Apply device calibration to an ICC profile." debian/tmp/usr/bin/applycal > debian/man/applycal.1 help2man -N --no-discard-stderr --name="Average or merge values in .ti3 like files." debian/tmp/usr/bin/average > debian/man/average.1 help2man -N --no-discard-stderr --name="Convert Colorblind raw device profile data to Argyll data." debian/tmp/usr/bin/cb2ti3 > debian/man/cb2ti3.1 help2man -N --no-discard-stderr --name="Color Correct a TIFF file using any sequence of ICC profiles or Calibrations." debian/tmp/usr/bin/cctiff > debian/man/cctiff.1 -- cgit v1.2.3