From da4a717ddcd6ba5b5b0819aabbe49fcd5f77ae4d Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?J=C3=B6rg=20Frings-F=C3=BCrst?= Date: Sat, 2 May 2015 10:09:28 +0200 Subject: remove unused sources --- jpeg/ansi2knr.c | 739 -------------------------------------------------------- 1 file changed, 739 deletions(-) delete mode 100644 jpeg/ansi2knr.c (limited to 'jpeg/ansi2knr.c') diff --git a/jpeg/ansi2knr.c b/jpeg/ansi2knr.c deleted file mode 100644 index e84c210..0000000 --- a/jpeg/ansi2knr.c +++ /dev/null @@ -1,739 +0,0 @@ -/* Copyright (C) 1989, 2000 Aladdin Enterprises. All rights reserved. */ - -/*$Id: ansi2knr.c,v 1.14 2003/09/06 05:36:56 eggert Exp $*/ -/* Convert ANSI C function definitions to K&R ("traditional C") syntax */ - -/* -ansi2knr is distributed in the hope that it will be useful, but WITHOUT ANY -WARRANTY. No author or distributor accepts responsibility to anyone for the -consequences of using it or for whether it serves any particular purpose or -works at all, unless he says so in writing. Refer to the GNU General Public -License (the "GPL") for full details. - -Everyone is granted permission to copy, modify and redistribute ansi2knr, -but only under the conditions described in the GPL. A copy of this license -is supposed to have been given to you along with ansi2knr so you can know -your rights and responsibilities. It should be in a file named COPYLEFT, -or, if there is no file named COPYLEFT, a file named COPYING. Among other -things, the copyright notice and this notice must be preserved on all -copies. - -We explicitly state here what we believe is already implied by the GPL: if -the ansi2knr program is distributed as a separate set of sources and a -separate executable file which are aggregated on a storage medium together -with another program, this in itself does not bring the other program under -the GPL, nor does the mere fact that such a program or the procedures for -constructing it invoke the ansi2knr executable bring any other part of the -program under the GPL. -*/ - -/* - * Usage: - ansi2knr [--filename FILENAME] [INPUT_FILE [OUTPUT_FILE]] - * --filename provides the file name for the #line directive in the output, - * overriding input_file (if present). - * If no input_file is supplied, input is read from stdin. - * If no output_file is supplied, output goes to stdout. - * There are no error messages. - * - * ansi2knr recognizes function definitions by seeing a non-keyword - * identifier at the left margin, followed by a left parenthesis, with a - * right parenthesis as the last character on the line, and with a left - * brace as the first token on the following line (ignoring possible - * intervening comments and/or preprocessor directives), except that a line - * consisting of only - * identifier1(identifier2) - * will not be considered a function definition unless identifier2 is - * the word "void", and a line consisting of - * identifier1(identifier2, <>) - * will not be considered a function definition. - * ansi2knr will recognize a multi-line header provided that no intervening - * line ends with a left or right brace or a semicolon. These algorithms - * ignore whitespace, comments, and preprocessor directives, except that - * the function name must be the first thing on the line. The following - * constructs will confuse it: - * - Any other construct that starts at the left margin and - * follows the above syntax (such as a macro or function call). - * - Some macros that tinker with the syntax of function headers. - */ - -/* - * The original and principal author of ansi2knr is L. Peter Deutsch - * . Other authors are noted in the change history - * that follows (in reverse chronological order): - - lpd 2000-04-12 backs out Eggert's changes because of bugs: - - concatlits didn't declare the type of its bufend argument; - - concatlits didn't recognize when it was inside a comment; - - scanstring could scan backward past the beginning of the string; when - - the check for \ + newline in scanstring was unnecessary. - - 2000-03-05 Paul Eggert - - Add support for concatenated string literals. - * ansi2knr.c (concatlits): New decl. - (main): Invoke concatlits to concatenate string literals. - (scanstring): Handle backslash-newline correctly. Work with - character constants. Fix bug when scanning backwards through - backslash-quote. Check for unterminated strings. - (convert1): Parse character constants, too. - (appendline, concatlits): New functions. - * ansi2knr.1: Document this. - - lpd 1999-08-17 added code to allow preprocessor directives - wherever comments are allowed - lpd 1999-04-12 added minor fixes from Pavel Roskin - for clean compilation with - gcc -W -Wall - lpd 1999-03-22 added hack to recognize lines consisting of - identifier1(identifier2, xxx) as *not* being procedures - lpd 1999-02-03 made indentation of preprocessor commands consistent - lpd 1999-01-28 fixed two bugs: a '/' in an argument list caused an - endless loop; quoted strings within an argument list - confused the parser - lpd 1999-01-24 added a check for write errors on the output, - suggested by Jim Meyering - lpd 1998-11-09 added further hack to recognize identifier(void) - as being a procedure - lpd 1998-10-23 added hack to recognize lines consisting of - identifier1(identifier2) as *not* being procedures - lpd 1997-12-08 made input_file optional; only closes input and/or - output file if not stdin or stdout respectively; prints - usage message on stderr rather than stdout; adds - --filename switch (changes suggested by - ) - lpd 1996-01-21 added code to cope with not HAVE_CONFIG_H and with - compilers that don't understand void, as suggested by - Tom Lane - lpd 1996-01-15 changed to require that the first non-comment token - on the line following a function header be a left brace, - to reduce sensitivity to macros, as suggested by Tom Lane - - lpd 1995-06-22 removed #ifndefs whose sole purpose was to define - undefined preprocessor symbols as 0; changed all #ifdefs - for configuration symbols to #ifs - lpd 1995-04-05 changed copyright notice to make it clear that - including ansi2knr in a program does not bring the entire - program under the GPL - lpd 1994-12-18 added conditionals for systems where ctype macros - don't handle 8-bit characters properly, suggested by - Francois Pinard ; - removed --varargs switch (this is now the default) - lpd 1994-10-10 removed CONFIG_BROKETS conditional - lpd 1994-07-16 added some conditionals to help GNU `configure', - suggested by Francois Pinard ; - properly erase prototype args in function parameters, - contributed by Jim Avera ; - correct error in writeblanks (it shouldn't erase EOLs) - lpd 1989-xx-xx original version - */ - -/* Most of the conditionals here are to make ansi2knr work with */ -/* or without the GNU configure machinery. */ - -#if HAVE_CONFIG_H -# include -#endif - -#include -#include - -#if HAVE_CONFIG_H - -/* - For properly autoconfiguring ansi2knr, use AC_CONFIG_HEADER(config.h). - This will define HAVE_CONFIG_H and so, activate the following lines. - */ - -# if STDC_HEADERS || HAVE_STRING_H -# include -# else -# include -# endif - -#else /* not HAVE_CONFIG_H */ - -/* Otherwise do it the hard way */ - -# ifdef BSD -# include -# else -# ifdef VMS - extern int strlen(), strncmp(); -# else -# include -# endif -# endif - -#endif /* not HAVE_CONFIG_H */ - -#if STDC_HEADERS -# include -#else -/* - malloc and free should be declared in stdlib.h, - but if you've got a K&R compiler, they probably aren't. - */ -# ifdef MSDOS -# include -# else -# ifdef VMS - extern char *malloc(); - extern void free(); -# else - extern char *malloc(); - extern int free(); -# endif -# endif - -#endif - -/* Define NULL (for *very* old compilers). */ -#ifndef NULL -# define NULL (0) -#endif - -/* - * The ctype macros don't always handle 8-bit characters correctly. - * Compensate for this here. - */ -#ifdef isascii -# undef HAVE_ISASCII /* just in case */ -# define HAVE_ISASCII 1 -#else -#endif -#if STDC_HEADERS || !HAVE_ISASCII -# define is_ascii(c) 1 -#else -# define is_ascii(c) isascii(c) -#endif - -#define is_space(c) (is_ascii(c) && isspace(c)) -#define is_alpha(c) (is_ascii(c) && isalpha(c)) -#define is_alnum(c) (is_ascii(c) && isalnum(c)) - -/* Scanning macros */ -#define isidchar(ch) (is_alnum(ch) || (ch) == '_') -#define isidfirstchar(ch) (is_alpha(ch) || (ch) == '_') - -/* Forward references */ -char *ppdirforward(); -char *ppdirbackward(); -char *skipspace(); -char *scanstring(); -int writeblanks(); -int test1(); -int convert1(); - -/* The main program */ -int -main(argc, argv) - int argc; - char *argv[]; -{ FILE *in = stdin; - FILE *out = stdout; - char *filename = 0; - char *program_name = argv[0]; - char *output_name = 0; -#define bufsize 5000 /* arbitrary size */ - char *buf; - char *line; - char *more; - char *usage = - "Usage: ansi2knr [--filename FILENAME] [INPUT_FILE [OUTPUT_FILE]]\n"; - /* - * In previous versions, ansi2knr recognized a --varargs switch. - * If this switch was supplied, ansi2knr would attempt to convert - * a ... argument to va_alist and va_dcl; if this switch was not - * supplied, ansi2knr would simply drop any such arguments. - * Now, ansi2knr always does this conversion, and we only - * check for this switch for backward compatibility. - */ - int convert_varargs = 1; - int output_error; - - while ( argc > 1 && argv[1][0] == '-' ) { - if ( !strcmp(argv[1], "--varargs") ) { - convert_varargs = 1; - argc--; - argv++; - continue; - } - if ( !strcmp(argv[1], "--filename") && argc > 2 ) { - filename = argv[2]; - argc -= 2; - argv += 2; - continue; - } - fprintf(stderr, "%s: Unrecognized switch: %s\n", program_name, - argv[1]); - fprintf(stderr, usage); - exit(1); - } - switch ( argc ) - { - default: - fprintf(stderr, usage); - exit(0); - case 3: - output_name = argv[2]; - out = fopen(output_name, "w"); - if ( out == NULL ) { - fprintf(stderr, "%s: Cannot open output file %s\n", - program_name, output_name); - exit(1); - } - /* falls through */ - case 2: - in = fopen(argv[1], "r"); - if ( in == NULL ) { - fprintf(stderr, "%s: Cannot open input file %s\n", - program_name, argv[1]); - exit(1); - } - if ( filename == 0 ) - filename = argv[1]; - /* falls through */ - case 1: - break; - } - if ( filename ) - fprintf(out, "#line 1 \"%s\"\n", filename); - buf = malloc(bufsize); - if ( buf == NULL ) - { - fprintf(stderr, "Unable to allocate read buffer!\n"); - exit(1); - } - line = buf; - while ( fgets(line, (unsigned)(buf + bufsize - line), in) != NULL ) - { -test: line += strlen(line); - switch ( test1(buf) ) - { - case 2: /* a function header */ - convert1(buf, out, 1, convert_varargs); - break; - case 1: /* a function */ - /* Check for a { at the start of the next line. */ - more = ++line; -f: if ( line >= buf + (bufsize - 1) ) /* overflow check */ - goto wl; - if ( fgets(line, (unsigned)(buf + bufsize - line), in) == NULL ) - goto wl; - switch ( *skipspace(ppdirforward(more), 1) ) - { - case '{': - /* Definitely a function header. */ - convert1(buf, out, 0, convert_varargs); - fputs(more, out); - break; - case 0: - /* The next line was blank or a comment: */ - /* keep scanning for a non-comment. */ - line += strlen(line); - goto f; - default: - /* buf isn't a function header, but */ - /* more might be. */ - fputs(buf, out); - strcpy(buf, more); - line = buf; - goto test; - } - break; - case -1: /* maybe the start of a function */ - if ( line != buf + (bufsize - 1) ) /* overflow check */ - continue; - /* falls through */ - default: /* not a function */ -wl: fputs(buf, out); - break; - } - line = buf; - } - if ( line != buf ) - fputs(buf, out); - free(buf); - if ( output_name ) { - output_error = ferror(out); - output_error |= fclose(out); - } else { /* out == stdout */ - fflush(out); - output_error = ferror(out); - } - if ( output_error ) { - fprintf(stderr, "%s: error writing to %s\n", program_name, - (output_name ? output_name : "stdout")); - exit(1); - } - if ( in != stdin ) - fclose(in); - return 0; -} - -/* - * Skip forward or backward over one or more preprocessor directives. - */ -char * -ppdirforward(p) - char *p; -{ - for (; *p == '#'; ++p) { - for (; *p != '\r' && *p != '\n'; ++p) - if (*p == 0) - return p; - if (*p == '\r' && p[1] == '\n') - ++p; - } - return p; -} -char * -ppdirbackward(p, limit) - char *p; - char *limit; -{ - char *np = p; - - for (;; p = --np) { - if (*np == '\n' && np[-1] == '\r') - --np; - for (; np > limit && np[-1] != '\r' && np[-1] != '\n'; --np) - if (np[-1] == 0) - return np; - if (*np != '#') - return p; - } -} - -/* - * Skip over whitespace, comments, and preprocessor directives, - * in either direction. - */ -char * -skipspace(p, dir) - char *p; - int dir; /* 1 for forward, -1 for backward */ -{ - for ( ; ; ) { - while ( is_space(*p) ) - p += dir; - if ( !(*p == '/' && p[dir] == '*') ) - break; - p += dir; p += dir; - while ( !(*p == '*' && p[dir] == '/') ) { - if ( *p == 0 ) - return p; /* multi-line comment?? */ - p += dir; - } - p += dir; p += dir; - } - return p; -} - -/* Scan over a quoted string, in either direction. */ -char * -scanstring(p, dir) - char *p; - int dir; -{ - for (p += dir; ; p += dir) - if (*p == '"' && p[-dir] != '\\') - return p + dir; -} - -/* - * Write blanks over part of a string. - * Don't overwrite end-of-line characters. - */ -int -writeblanks(start, end) - char *start; - char *end; -{ char *p; - for ( p = start; p < end; p++ ) - if ( *p != '\r' && *p != '\n' ) - *p = ' '; - return 0; -} - -/* - * Test whether the string in buf is a function definition. - * The string may contain and/or end with a newline. - * Return as follows: - * 0 - definitely not a function definition; - * 1 - definitely a function definition; - * 2 - definitely a function prototype (NOT USED); - * -1 - may be the beginning of a function definition, - * append another line and look again. - * The reason we don't attempt to convert function prototypes is that - * Ghostscript's declaration-generating macros look too much like - * prototypes, and confuse the algorithms. - */ -int -test1(buf) - char *buf; -{ char *p = buf; - char *bend; - char *endfn; - int contin; - - if ( !isidfirstchar(*p) ) - return 0; /* no name at left margin */ - bend = skipspace(ppdirbackward(buf + strlen(buf) - 1, buf), -1); - switch ( *bend ) - { - case ';': contin = 0 /*2*/; break; - case ')': contin = 1; break; - case '{': return 0; /* not a function */ - case '}': return 0; /* not a function */ - default: contin = -1; - } - while ( isidchar(*p) ) - p++; - endfn = p; - p = skipspace(p, 1); - if ( *p++ != '(' ) - return 0; /* not a function */ - p = skipspace(p, 1); - if ( *p == ')' ) - return 0; /* no parameters */ - /* Check that the apparent function name isn't a keyword. */ - /* We only need to check for keywords that could be followed */ - /* by a left parenthesis (which, unfortunately, is most of them). */ - { static char *words[] = - { "asm", "auto", "case", "char", "const", "double", - "extern", "float", "for", "if", "int", "long", - "register", "return", "short", "signed", "sizeof", - "static", "switch", "typedef", "unsigned", - "void", "volatile", "while", 0 - }; - char **key = words; - char *kp; - unsigned len = endfn - buf; - - while ( (kp = *key) != 0 ) - { if ( strlen(kp) == len && !strncmp(kp, buf, len) ) - return 0; /* name is a keyword */ - key++; - } - } - { - char *id = p; - int len; - /* - * Check for identifier1(identifier2) and not - * identifier1(void), or identifier1(identifier2, xxxx). - */ - - while ( isidchar(*p) ) - p++; - len = p - id; - p = skipspace(p, 1); - if (*p == ',' || - (*p == ')' && (len != 4 || strncmp(id, "void", 4))) - ) - return 0; /* not a function */ - } - /* - * If the last significant character was a ), we need to count - * parentheses, because it might be part of a formal parameter - * that is a procedure. - */ - if (contin > 0) { - int level = 0; - - for (p = skipspace(buf, 1); *p; p = skipspace(p + 1, 1)) - level += (*p == '(' ? 1 : *p == ')' ? -1 : 0); - if (level > 0) - contin = -1; - } - return contin; -} - -/* Convert a recognized function definition or header to K&R syntax. */ -int -convert1(buf, out, header, convert_varargs) - char *buf; - FILE *out; - int header; /* Boolean */ - int convert_varargs; /* Boolean */ -{ char *endfn; - char *p; - /* - * The breaks table contains pointers to the beginning and end - * of each argument. - */ - char **breaks; - unsigned num_breaks = 2; /* for testing */ - char **btop; - char **bp; - char **ap; - char *vararg = 0; - - /* Pre-ANSI implementations don't agree on whether strchr */ - /* is called strchr or index, so we open-code it here. */ - for ( endfn = buf; *(endfn++) != '('; ) - ; -top: p = endfn; - breaks = (char **)malloc(sizeof(char *) * num_breaks * 2); - if ( breaks == NULL ) - { /* Couldn't allocate break table, give up */ - fprintf(stderr, "Unable to allocate break table!\n"); - fputs(buf, out); - return -1; - } - btop = breaks + num_breaks * 2 - 2; - bp = breaks; - /* Parse the argument list */ - do - { int level = 0; - char *lp = NULL; - char *rp = NULL; - char *end = NULL; - - if ( bp >= btop ) - { /* Filled up break table. */ - /* Allocate a bigger one and start over. */ - free((char *)breaks); - num_breaks <<= 1; - goto top; - } - *bp++ = p; - /* Find the end of the argument */ - for ( ; end == NULL; p++ ) - { switch(*p) - { - case ',': - if ( !level ) end = p; - break; - case '(': - if ( !level ) lp = p; - level++; - break; - case ')': - if ( --level < 0 ) end = p; - else rp = p; - break; - case '/': - if (p[1] == '*') - p = skipspace(p, 1) - 1; - break; - case '"': - p = scanstring(p, 1) - 1; - break; - default: - ; - } - } - /* Erase any embedded prototype parameters. */ - if ( lp && rp ) - writeblanks(lp + 1, rp); - p--; /* back up over terminator */ - /* Find the name being declared. */ - /* This is complicated because of procedure and */ - /* array modifiers. */ - for ( ; ; ) - { p = skipspace(p - 1, -1); - switch ( *p ) - { - case ']': /* skip array dimension(s) */ - case ')': /* skip procedure args OR name */ - { int level = 1; - while ( level ) - switch ( *--p ) - { - case ']': case ')': - level++; - break; - case '[': case '(': - level--; - break; - case '/': - if (p > buf && p[-1] == '*') - p = skipspace(p, -1) + 1; - break; - case '"': - p = scanstring(p, -1) + 1; - break; - default: ; - } - } - if ( *p == '(' && *skipspace(p + 1, 1) == '*' ) - { /* We found the name being declared */ - while ( !isidfirstchar(*p) ) - p = skipspace(p, 1) + 1; - goto found; - } - break; - default: - goto found; - } - } -found: if ( *p == '.' && p[-1] == '.' && p[-2] == '.' ) - { if ( convert_varargs ) - { *bp++ = "va_alist"; - vararg = p-2; - } - else - { p++; - if ( bp == breaks + 1 ) /* sole argument */ - writeblanks(breaks[0], p); - else - writeblanks(bp[-1] - 1, p); - bp--; - } - } - else - { while ( isidchar(*p) ) p--; - *bp++ = p+1; - } - p = end; - } - while ( *p++ == ',' ); - *bp = p; - /* Make a special check for 'void' arglist */ - if ( bp == breaks+2 ) - { p = skipspace(breaks[0], 1); - if ( !strncmp(p, "void", 4) ) - { p = skipspace(p+4, 1); - if ( p == breaks[2] - 1 ) - { bp = breaks; /* yup, pretend arglist is empty */ - writeblanks(breaks[0], p + 1); - } - } - } - /* Put out the function name and left parenthesis. */ - p = buf; - while ( p != endfn ) putc(*p, out), p++; - /* Put out the declaration. */ - if ( header ) - { fputs(");", out); - for ( p = breaks[0]; *p; p++ ) - if ( *p == '\r' || *p == '\n' ) - putc(*p, out); - } - else - { for ( ap = breaks+1; ap < bp; ap += 2 ) - { p = *ap; - while ( isidchar(*p) ) - putc(*p, out), p++; - if ( ap < bp - 1 ) - fputs(", ", out); - } - fputs(") ", out); - /* Put out the argument declarations */ - for ( ap = breaks+2; ap <= bp; ap += 2 ) - (*ap)[-1] = ';'; - if ( vararg != 0 ) - { *vararg = 0; - fputs(breaks[0], out); /* any prior args */ - fputs("va_dcl", out); /* the final arg */ - fputs(bp[0], out); - } - else - fputs(breaks[0], out); - } - free((char *)breaks); - return 0; -} -- cgit v1.2.3