From da4a717ddcd6ba5b5b0819aabbe49fcd5f77ae4d Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?J=C3=B6rg=20Frings-F=C3=BCrst?= Date: Sat, 2 May 2015 10:09:28 +0200 Subject: remove unused sources --- jpeg/wrjpgcom.c | 583 -------------------------------------------------------- 1 file changed, 583 deletions(-) delete mode 100644 jpeg/wrjpgcom.c (limited to 'jpeg/wrjpgcom.c') diff --git a/jpeg/wrjpgcom.c b/jpeg/wrjpgcom.c deleted file mode 100644 index 8c04b05..0000000 --- a/jpeg/wrjpgcom.c +++ /dev/null @@ -1,583 +0,0 @@ -/* - * wrjpgcom.c - * - * Copyright (C) 1994-1997, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains a very simple stand-alone application that inserts - * user-supplied text as a COM (comment) marker in a JFIF file. - * This may be useful as an example of the minimum logic needed to parse - * JPEG markers. - */ - -#define JPEG_CJPEG_DJPEG /* to get the command-line config symbols */ -#include "jinclude.h" /* get auto-config symbols, */ - -#ifndef HAVE_STDLIB_H /* should declare malloc() */ -extern void * malloc (); -#endif -#include /* to declare isupper(), tolower() */ -#ifdef USE_SETMODE -#include /* to declare setmode()'s parameter macros */ -/* If you have setmode() but not , just delete this line: */ -#include /* to declare setmode() */ -#endif - -#ifdef USE_CCOMMAND /* command-line reader for Macintosh */ -#ifdef __MWERKS__ -#include /* Metrowerks needs this */ -#include /* ... and this */ -#endif -#ifdef THINK_C -#include /* Think declares it here */ -#endif -#endif - -#ifdef DONT_USE_B_MODE /* define mode parameters for fopen() */ -#define READ_BINARY "r" -#define WRITE_BINARY "w" -#else -#ifdef VMS /* VMS is very nonstandard */ -#define READ_BINARY "rb", "ctx=stm" -#define WRITE_BINARY "wb", "ctx=stm" -#else /* standard ANSI-compliant case */ -#define READ_BINARY "rb" -#define WRITE_BINARY "wb" -#endif -#endif - -#ifndef EXIT_FAILURE /* define exit() codes if not provided */ -#define EXIT_FAILURE 1 -#endif -#ifndef EXIT_SUCCESS -#ifdef VMS -#define EXIT_SUCCESS 1 /* VMS is very nonstandard */ -#else -#define EXIT_SUCCESS 0 -#endif -#endif - -/* Reduce this value if your malloc() can't allocate blocks up to 64K. - * On DOS, compiling in large model is usually a better solution. - */ - -#ifndef MAX_COM_LENGTH -#define MAX_COM_LENGTH 65000L /* must be <= 65533 in any case */ -#endif - - -/* - * These macros are used to read the input file and write the output file. - * To reuse this code in another application, you might need to change these. - */ - -static FILE * infile; /* input JPEG file */ - -/* Return next input byte, or EOF if no more */ -#define NEXTBYTE() getc(infile) - -static FILE * outfile; /* output JPEG file */ - -/* Emit an output byte */ -#define PUTBYTE(x) putc((x), outfile) - - -/* Error exit handler */ -#define ERREXIT(msg) (fprintf(stderr, "%s\n", msg), exit(EXIT_FAILURE)) - - -/* Read one byte, testing for EOF */ -static int -read_1_byte (void) -{ - int c; - - c = NEXTBYTE(); - if (c == EOF) - ERREXIT("Premature EOF in JPEG file"); - return c; -} - -/* Read 2 bytes, convert to unsigned int */ -/* All 2-byte quantities in JPEG markers are MSB first */ -static unsigned int -read_2_bytes (void) -{ - int c1, c2; - - c1 = NEXTBYTE(); - if (c1 == EOF) - ERREXIT("Premature EOF in JPEG file"); - c2 = NEXTBYTE(); - if (c2 == EOF) - ERREXIT("Premature EOF in JPEG file"); - return (((unsigned int) c1) << 8) + ((unsigned int) c2); -} - - -/* Routines to write data to output file */ - -static void -write_1_byte (int c) -{ - PUTBYTE(c); -} - -static void -write_2_bytes (unsigned int val) -{ - PUTBYTE((val >> 8) & 0xFF); - PUTBYTE(val & 0xFF); -} - -static void -write_marker (int marker) -{ - PUTBYTE(0xFF); - PUTBYTE(marker); -} - -static void -copy_rest_of_file (void) -{ - int c; - - while ((c = NEXTBYTE()) != EOF) - PUTBYTE(c); -} - - -/* - * JPEG markers consist of one or more 0xFF bytes, followed by a marker - * code byte (which is not an FF). Here are the marker codes of interest - * in this program. (See jdmarker.c for a more complete list.) - */ - -#define M_SOF0 0xC0 /* Start Of Frame N */ -#define M_SOF1 0xC1 /* N indicates which compression process */ -#define M_SOF2 0xC2 /* Only SOF0-SOF2 are now in common use */ -#define M_SOF3 0xC3 -#define M_SOF5 0xC5 /* NB: codes C4 and CC are NOT SOF markers */ -#define M_SOF6 0xC6 -#define M_SOF7 0xC7 -#define M_SOF9 0xC9 -#define M_SOF10 0xCA -#define M_SOF11 0xCB -#define M_SOF13 0xCD -#define M_SOF14 0xCE -#define M_SOF15 0xCF -#define M_SOI 0xD8 /* Start Of Image (beginning of datastream) */ -#define M_EOI 0xD9 /* End Of Image (end of datastream) */ -#define M_SOS 0xDA /* Start Of Scan (begins compressed data) */ -#define M_COM 0xFE /* COMment */ - - -/* - * Find the next JPEG marker and return its marker code. - * We expect at least one FF byte, possibly more if the compressor used FFs - * to pad the file. (Padding FFs will NOT be replicated in the output file.) - * There could also be non-FF garbage between markers. The treatment of such - * garbage is unspecified; we choose to skip over it but emit a warning msg. - * NB: this routine must not be used after seeing SOS marker, since it will - * not deal correctly with FF/00 sequences in the compressed image data... - */ - -static int -next_marker (void) -{ - int c; - int discarded_bytes = 0; - - /* Find 0xFF byte; count and skip any non-FFs. */ - c = read_1_byte(); - while (c != 0xFF) { - discarded_bytes++; - c = read_1_byte(); - } - /* Get marker code byte, swallowing any duplicate FF bytes. Extra FFs - * are legal as pad bytes, so don't count them in discarded_bytes. - */ - do { - c = read_1_byte(); - } while (c == 0xFF); - - if (discarded_bytes != 0) { - fprintf(stderr, "Warning: garbage data found in JPEG file\n"); - } - - return c; -} - - -/* - * Read the initial marker, which should be SOI. - * For a JFIF file, the first two bytes of the file should be literally - * 0xFF M_SOI. To be more general, we could use next_marker, but if the - * input file weren't actually JPEG at all, next_marker might read the whole - * file and then return a misleading error message... - */ - -static int -first_marker (void) -{ - int c1, c2; - - c1 = NEXTBYTE(); - c2 = NEXTBYTE(); - if (c1 != 0xFF || c2 != M_SOI) - ERREXIT("Not a JPEG file"); - return c2; -} - - -/* - * Most types of marker are followed by a variable-length parameter segment. - * This routine skips over the parameters for any marker we don't otherwise - * want to process. - * Note that we MUST skip the parameter segment explicitly in order not to - * be fooled by 0xFF bytes that might appear within the parameter segment; - * such bytes do NOT introduce new markers. - */ - -static void -copy_variable (void) -/* Copy an unknown or uninteresting variable-length marker */ -{ - unsigned int length; - - /* Get the marker parameter length count */ - length = read_2_bytes(); - write_2_bytes(length); - /* Length includes itself, so must be at least 2 */ - if (length < 2) - ERREXIT("Erroneous JPEG marker length"); - length -= 2; - /* Skip over the remaining bytes */ - while (length > 0) { - write_1_byte(read_1_byte()); - length--; - } -} - -static void -skip_variable (void) -/* Skip over an unknown or uninteresting variable-length marker */ -{ - unsigned int length; - - /* Get the marker parameter length count */ - length = read_2_bytes(); - /* Length includes itself, so must be at least 2 */ - if (length < 2) - ERREXIT("Erroneous JPEG marker length"); - length -= 2; - /* Skip over the remaining bytes */ - while (length > 0) { - (void) read_1_byte(); - length--; - } -} - - -/* - * Parse the marker stream until SOFn or EOI is seen; - * copy data to output, but discard COM markers unless keep_COM is true. - */ - -static int -scan_JPEG_header (int keep_COM) -{ - int marker; - - /* Expect SOI at start of file */ - if (first_marker() != M_SOI) - ERREXIT("Expected SOI marker first"); - write_marker(M_SOI); - - /* Scan miscellaneous markers until we reach SOFn. */ - for (;;) { - marker = next_marker(); - switch (marker) { - /* Note that marker codes 0xC4, 0xC8, 0xCC are not, and must not be, - * treated as SOFn. C4 in particular is actually DHT. - */ - case M_SOF0: /* Baseline */ - case M_SOF1: /* Extended sequential, Huffman */ - case M_SOF2: /* Progressive, Huffman */ - case M_SOF3: /* Lossless, Huffman */ - case M_SOF5: /* Differential sequential, Huffman */ - case M_SOF6: /* Differential progressive, Huffman */ - case M_SOF7: /* Differential lossless, Huffman */ - case M_SOF9: /* Extended sequential, arithmetic */ - case M_SOF10: /* Progressive, arithmetic */ - case M_SOF11: /* Lossless, arithmetic */ - case M_SOF13: /* Differential sequential, arithmetic */ - case M_SOF14: /* Differential progressive, arithmetic */ - case M_SOF15: /* Differential lossless, arithmetic */ - return marker; - - case M_SOS: /* should not see compressed data before SOF */ - ERREXIT("SOS without prior SOFn"); - break; - - case M_EOI: /* in case it's a tables-only JPEG stream */ - return marker; - - case M_COM: /* Existing COM: conditionally discard */ - if (keep_COM) { - write_marker(marker); - copy_variable(); - } else { - skip_variable(); - } - break; - - default: /* Anything else just gets copied */ - write_marker(marker); - copy_variable(); /* we assume it has a parameter count... */ - break; - } - } /* end loop */ -} - - -/* Command line parsing code */ - -static const char * progname; /* program name for error messages */ - - -static void -usage (void) -/* complain about bad command line */ -{ - fprintf(stderr, "wrjpgcom inserts a textual comment in a JPEG file.\n"); - fprintf(stderr, "You can add to or replace any existing comment(s).\n"); - - fprintf(stderr, "Usage: %s [switches] ", progname); -#ifdef TWO_FILE_COMMANDLINE - fprintf(stderr, "inputfile outputfile\n"); -#else - fprintf(stderr, "[inputfile]\n"); -#endif - - fprintf(stderr, "Switches (names may be abbreviated):\n"); - fprintf(stderr, " -replace Delete any existing comments\n"); - fprintf(stderr, " -comment \"text\" Insert comment with given text\n"); - fprintf(stderr, " -cfile name Read comment from named file\n"); - fprintf(stderr, "Notice that you must put quotes around the comment text\n"); - fprintf(stderr, "when you use -comment.\n"); - fprintf(stderr, "If you do not give either -comment or -cfile on the command line,\n"); - fprintf(stderr, "then the comment text is read from standard input.\n"); - fprintf(stderr, "It can be multiple lines, up to %u characters total.\n", - (unsigned int) MAX_COM_LENGTH); -#ifndef TWO_FILE_COMMANDLINE - fprintf(stderr, "You must specify an input JPEG file name when supplying\n"); - fprintf(stderr, "comment text from standard input.\n"); -#endif - - exit(EXIT_FAILURE); -} - - -static int -keymatch (char * arg, const char * keyword, int minchars) -/* Case-insensitive matching of (possibly abbreviated) keyword switches. */ -/* keyword is the constant keyword (must be lower case already), */ -/* minchars is length of minimum legal abbreviation. */ -{ - register int ca, ck; - register int nmatched = 0; - - while ((ca = *arg++) != '\0') { - if ((ck = *keyword++) == '\0') - return 0; /* arg longer than keyword, no good */ - if (isupper(ca)) /* force arg to lcase (assume ck is already) */ - ca = tolower(ca); - if (ca != ck) - return 0; /* no good */ - nmatched++; /* count matched characters */ - } - /* reached end of argument; fail if it's too short for unique abbrev */ - if (nmatched < minchars) - return 0; - return 1; /* A-OK */ -} - - -/* - * The main program. - */ - -int -main (int argc, char **argv) -{ - int argn; - char * arg; - int keep_COM = 1; - char * comment_arg = NULL; - FILE * comment_file = NULL; - unsigned int comment_length = 0; - int marker; - - /* On Mac, fetch a command line. */ -#ifdef USE_CCOMMAND - argc = ccommand(&argv); -#endif - - progname = argv[0]; - if (progname == NULL || progname[0] == 0) - progname = "wrjpgcom"; /* in case C library doesn't provide it */ - - /* Parse switches, if any */ - for (argn = 1; argn < argc; argn++) { - arg = argv[argn]; - if (arg[0] != '-') - break; /* not switch, must be file name */ - arg++; /* advance over '-' */ - if (keymatch(arg, "replace", 1)) { - keep_COM = 0; - } else if (keymatch(arg, "cfile", 2)) { - if (++argn >= argc) usage(); - if ((comment_file = fopen(argv[argn], "r")) == NULL) { - fprintf(stderr, "%s: can't open %s\n", progname, argv[argn]); - exit(EXIT_FAILURE); - } - } else if (keymatch(arg, "comment", 1)) { - if (++argn >= argc) usage(); - comment_arg = argv[argn]; - /* If the comment text starts with '"', then we are probably running - * under MS-DOG and must parse out the quoted string ourselves. Sigh. - */ - if (comment_arg[0] == '"') { - comment_arg = (char *) malloc((size_t) MAX_COM_LENGTH); - if (comment_arg == NULL) - ERREXIT("Insufficient memory"); - strcpy(comment_arg, argv[argn]+1); - for (;;) { - comment_length = (unsigned int) strlen(comment_arg); - if (comment_length > 0 && comment_arg[comment_length-1] == '"') { - comment_arg[comment_length-1] = '\0'; /* zap terminating quote */ - break; - } - if (++argn >= argc) - ERREXIT("Missing ending quote mark"); - strcat(comment_arg, " "); - strcat(comment_arg, argv[argn]); - } - } - comment_length = (unsigned int) strlen(comment_arg); - } else - usage(); - } - - /* Cannot use both -comment and -cfile. */ - if (comment_arg != NULL && comment_file != NULL) - usage(); - /* If there is neither -comment nor -cfile, we will read the comment text - * from stdin; in this case there MUST be an input JPEG file name. - */ - if (comment_arg == NULL && comment_file == NULL && argn >= argc) - usage(); - - /* Open the input file. */ - if (argn < argc) { - if ((infile = fopen(argv[argn], READ_BINARY)) == NULL) { - fprintf(stderr, "%s: can't open %s\n", progname, argv[argn]); - exit(EXIT_FAILURE); - } - } else { - /* default input file is stdin */ -#ifdef USE_SETMODE /* need to hack file mode? */ - setmode(fileno(stdin), O_BINARY); -#endif -#ifdef USE_FDOPEN /* need to re-open in binary mode? */ - if ((infile = fdopen(fileno(stdin), READ_BINARY)) == NULL) { - fprintf(stderr, "%s: can't open stdin\n", progname); - exit(EXIT_FAILURE); - } -#else - infile = stdin; -#endif - } - - /* Open the output file. */ -#ifdef TWO_FILE_COMMANDLINE - /* Must have explicit output file name */ - if (argn != argc-2) { - fprintf(stderr, "%s: must name one input and one output file\n", - progname); - usage(); - } - if ((outfile = fopen(argv[argn+1], WRITE_BINARY)) == NULL) { - fprintf(stderr, "%s: can't open %s\n", progname, argv[argn+1]); - exit(EXIT_FAILURE); - } -#else - /* Unix style: expect zero or one file name */ - if (argn < argc-1) { - fprintf(stderr, "%s: only one input file\n", progname); - usage(); - } - /* default output file is stdout */ -#ifdef USE_SETMODE /* need to hack file mode? */ - setmode(fileno(stdout), O_BINARY); -#endif -#ifdef USE_FDOPEN /* need to re-open in binary mode? */ - if ((outfile = fdopen(fileno(stdout), WRITE_BINARY)) == NULL) { - fprintf(stderr, "%s: can't open stdout\n", progname); - exit(EXIT_FAILURE); - } -#else - outfile = stdout; -#endif -#endif /* TWO_FILE_COMMANDLINE */ - - /* Collect comment text from comment_file or stdin, if necessary */ - if (comment_arg == NULL) { - FILE * src_file; - int c; - - comment_arg = (char *) malloc((size_t) MAX_COM_LENGTH); - if (comment_arg == NULL) - ERREXIT("Insufficient memory"); - comment_length = 0; - src_file = (comment_file != NULL ? comment_file : stdin); - while ((c = getc(src_file)) != EOF) { - if (comment_length >= (unsigned int) MAX_COM_LENGTH) { - fprintf(stderr, "Comment text may not exceed %u bytes\n", - (unsigned int) MAX_COM_LENGTH); - exit(EXIT_FAILURE); - } - comment_arg[comment_length++] = (char) c; - } - if (comment_file != NULL) - fclose(comment_file); - } - - /* Copy JPEG headers until SOFn marker; - * we will insert the new comment marker just before SOFn. - * This (a) causes the new comment to appear after, rather than before, - * existing comments; and (b) ensures that comments come after any JFIF - * or JFXX markers, as required by the JFIF specification. - */ - marker = scan_JPEG_header(keep_COM); - /* Insert the new COM marker, but only if nonempty text has been supplied */ - if (comment_length > 0) { - write_marker(M_COM); - write_2_bytes(comment_length + 2); - while (comment_length > 0) { - write_1_byte(*comment_arg++); - comment_length--; - } - } - /* Duplicate the remainder of the source file. - * Note that any COM markers occuring after SOF will not be touched. - */ - write_marker(marker); - copy_rest_of_file(); - - /* All done. */ - exit(EXIT_SUCCESS); - return 0; /* suppress no-return-value warnings */ -} -- cgit v1.2.3