From d479dd1aab1c1cb907932c6595b0ef33523fc797 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?J=C3=B6rg=20Frings-F=C3=BCrst?= Date: Fri, 6 Nov 2015 07:14:47 +0100 Subject: Imported Upstream version 1.8.3 --- jpeg/Jamfile | 26 - jpeg/Makefile.am | 134 - jpeg/Makefile.in | 1094 ---- jpeg/README | 351 -- jpeg/aclocal.m4 | 9652 ------------------------------- jpeg/afiles | 185 - jpeg/ansi2knr.1 | 36 - jpeg/ansi2knr.c | 739 --- jpeg/cderror.h | 134 - jpeg/cdjpeg.c | 181 - jpeg/cdjpeg.h | 187 - jpeg/change.log | 346 -- jpeg/cjpeg.1 | 348 -- jpeg/cjpeg.c | 643 --- jpeg/ckconfig.c | 402 -- jpeg/coderules.txt | 118 - jpeg/config.guess | 1522 ----- jpeg/config.sub | 1771 ------ jpeg/configure | 15928 --------------------------------------------------- jpeg/configure.ac | 356 -- jpeg/depcomp | 688 --- jpeg/djpeg.1 | 252 - jpeg/djpeg.c | 617 -- jpeg/example.c | 433 -- jpeg/filelist.txt | 215 - jpeg/install-sh | 527 -- jpeg/install.txt | 1096 ---- jpeg/jaricom.c | 153 - jpeg/jcapimin.c | 288 - jpeg/jcapistd.c | 161 - jpeg/jcarith.c | 937 --- jpeg/jccoefct.c | 454 -- jpeg/jccolor.c | 490 -- jpeg/jcdctmgr.c | 482 -- jpeg/jchuff.c | 1576 ----- jpeg/jcinit.c | 65 - jpeg/jcmainct.c | 293 - jpeg/jcmarker.c | 682 --- jpeg/jcmaster.c | 858 --- jpeg/jcomapi.c | 106 - jpeg/jconfig.bcc | 48 - jpeg/jconfig.cfg | 53 - jpeg/jconfig.dj | 38 - jpeg/jconfig.mac | 43 - jpeg/jconfig.manx | 43 - jpeg/jconfig.mc6 | 52 - jpeg/jconfig.sas | 43 - jpeg/jconfig.st | 42 - jpeg/jconfig.txt | 164 - jpeg/jconfig.vc | 45 - jpeg/jconfig.vms | 37 - jpeg/jconfig.wat | 38 - jpeg/jcparam.c | 632 -- jpeg/jcprepct.c | 358 -- jpeg/jcsample.c | 545 -- jpeg/jctrans.c | 382 -- jpeg/jdapimin.c | 396 -- jpeg/jdapistd.c | 275 - jpeg/jdarith.c | 776 --- jpeg/jdatadst.c | 267 - jpeg/jdatasrc.c | 275 - jpeg/jdcoefct.c | 741 --- jpeg/jdcolor.c | 512 -- jpeg/jdct.h | 393 -- jpeg/jddctmgr.c | 384 -- jpeg/jdhuff.c | 1541 ----- jpeg/jdinput.c | 661 --- jpeg/jdmainct.c | 512 -- jpeg/jdmarker.c | 1406 ----- jpeg/jdmaster.c | 531 -- jpeg/jdmerge.c | 400 -- jpeg/jdosaobj.txt | 16 - jpeg/jdpostct.c | 290 - jpeg/jdsample.c | 361 -- jpeg/jdtrans.c | 140 - jpeg/jerror.c | 252 - jpeg/jerror.h | 304 - jpeg/jfdctflt.c | 174 - jpeg/jfdctfst.c | 230 - jpeg/jfdctint.c | 4348 -------------- jpeg/jidctflt.c | 235 - jpeg/jidctfst.c | 368 -- jpeg/jidctint.c | 5137 ----------------- jpeg/jinclude.h | 91 - jpeg/jmemansi.c | 167 - jpeg/jmemdos.c | 638 --- jpeg/jmemdosa.asm | 379 -- jpeg/jmemmac.c | 289 - jpeg/jmemmgr.c | 1119 ---- jpeg/jmemname.c | 276 - jpeg/jmemnobs.c | 109 - jpeg/jmemsys.h | 198 - jpeg/jmorecfg.h | 369 -- jpeg/jpegint.h | 426 -- jpeg/jpeglib.h | 1160 ---- jpeg/jpegsr8d.zip | Bin 1060974 -> 0 bytes jpeg/jpegtran.1 | 285 - jpeg/jpegtran.c | 560 -- jpeg/jquant1.c | 857 --- jpeg/jquant2.c | 1311 ----- jpeg/jutils.c | 227 - jpeg/jversion.h | 14 - jpeg/libjpeg.map | 4 - jpeg/libjpeg.txt | 3085 ---------- jpeg/ltmain.sh | 9655 ------------------------------- jpeg/makcjpeg.st | 36 - jpeg/makdjpeg.st | 36 - jpeg/makeadsw.vc6 | 77 - jpeg/makeasln.v10 | 33 - jpeg/makecdep.vc6 | 82 - jpeg/makecdsp.vc6 | 130 - jpeg/makecfil.v10 | 69 - jpeg/makecmak.vc6 | 159 - jpeg/makecvcx.v10 | 76 - jpeg/makeddep.vc6 | 82 - jpeg/makeddsp.vc6 | 130 - jpeg/makedfil.v10 | 69 - jpeg/makedmak.vc6 | 159 - jpeg/makedvcx.v10 | 76 - jpeg/makefile.ansi | 221 - jpeg/makefile.bcc | 292 - jpeg/makefile.dj | 227 - jpeg/makefile.manx | 221 - jpeg/makefile.mc6 | 256 - jpeg/makefile.mms | 225 - jpeg/makefile.sas | 259 - jpeg/makefile.unix | 235 - jpeg/makefile.vc | 273 - jpeg/makefile.vms | 142 - jpeg/makefile.wat | 240 - jpeg/makejdep.vc6 | 423 -- jpeg/makejdsp.vc6 | 285 - jpeg/makejdsw.vc6 | 29 - jpeg/makejfil.v10 | 186 - jpeg/makejmak.vc6 | 425 -- jpeg/makejsln.v10 | 17 - jpeg/makejvcx.v10 | 112 - jpeg/makeproj.mac | 213 - jpeg/makerdep.vc6 | 6 - jpeg/makerdsp.vc6 | 78 - jpeg/makerfil.v10 | 30 - jpeg/makermak.vc6 | 110 - jpeg/makervcx.v10 | 62 - jpeg/maketdep.vc6 | 43 - jpeg/maketdsp.vc6 | 122 - jpeg/maketfil.v10 | 63 - jpeg/maketmak.vc6 | 131 - jpeg/maketvcx.v10 | 74 - jpeg/makewdep.vc6 | 6 - jpeg/makewdsp.vc6 | 78 - jpeg/makewfil.v10 | 30 - jpeg/makewmak.vc6 | 110 - jpeg/makewvcx.v10 | 62 - jpeg/makljpeg.st | 68 - jpeg/maktjpeg.st | 30 - jpeg/makvms.opt | 4 - jpeg/missing | 376 -- jpeg/rdbmp.c | 480 -- jpeg/rdcolmap.c | 253 - jpeg/rdgif.c | 38 - jpeg/rdjpgcom.1 | 63 - jpeg/rdjpgcom.c | 515 -- jpeg/rdppm.c | 459 -- jpeg/rdrle.c | 387 -- jpeg/rdswitch.c | 365 -- jpeg/rdtarga.c | 500 -- jpeg/readme.dos | 15 - jpeg/structure.txt | 941 --- jpeg/testimg.bmp | Bin 35050 -> 0 bytes jpeg/testimg.jpg | Bin 5764 -> 0 bytes jpeg/testimg.ppm | 4 - jpeg/testimgp.jpg | Bin 5645 -> 0 bytes jpeg/testorig.jpg | Bin 5770 -> 0 bytes jpeg/testprog.jpg | Bin 5655 -> 0 bytes jpeg/transupp.c | 1597 ------ jpeg/transupp.h | 213 - jpeg/usage.txt | 637 -- jpeg/wizard.txt | 211 - jpeg/wrbmp.c | 442 -- jpeg/wrgif.c | 399 -- jpeg/wrjpgcom.1 | 103 - jpeg/wrjpgcom.c | 583 -- jpeg/wrppm.c | 269 - jpeg/wrrle.c | 305 - jpeg/wrtarga.c | 253 - 185 files changed, 105243 deletions(-) delete mode 100755 jpeg/Jamfile delete mode 100755 jpeg/Makefile.am delete mode 100755 jpeg/Makefile.in delete mode 100755 jpeg/README delete mode 100755 jpeg/aclocal.m4 delete mode 100755 jpeg/afiles delete mode 100755 jpeg/ansi2knr.1 delete mode 100755 jpeg/ansi2knr.c delete mode 100755 jpeg/cderror.h delete mode 100755 jpeg/cdjpeg.c delete mode 100755 jpeg/cdjpeg.h delete mode 100755 jpeg/change.log delete mode 100755 jpeg/cjpeg.1 delete mode 100755 jpeg/cjpeg.c delete mode 100755 jpeg/ckconfig.c delete mode 100755 jpeg/coderules.txt delete mode 100755 jpeg/config.guess delete mode 100755 jpeg/config.sub delete mode 100755 jpeg/configure delete mode 100755 jpeg/configure.ac delete mode 100755 jpeg/depcomp delete mode 100755 jpeg/djpeg.1 delete mode 100755 jpeg/djpeg.c delete mode 100755 jpeg/example.c delete mode 100755 jpeg/filelist.txt delete mode 100755 jpeg/install-sh delete mode 100755 jpeg/install.txt delete mode 100755 jpeg/jaricom.c delete mode 100755 jpeg/jcapimin.c delete mode 100755 jpeg/jcapistd.c delete mode 100755 jpeg/jcarith.c delete mode 100755 jpeg/jccoefct.c delete mode 100755 jpeg/jccolor.c delete mode 100755 jpeg/jcdctmgr.c delete mode 100755 jpeg/jchuff.c delete mode 100755 jpeg/jcinit.c delete mode 100755 jpeg/jcmainct.c delete mode 100755 jpeg/jcmarker.c delete mode 100755 jpeg/jcmaster.c delete mode 100755 jpeg/jcomapi.c delete mode 100755 jpeg/jconfig.bcc delete mode 100755 jpeg/jconfig.cfg delete mode 100755 jpeg/jconfig.dj delete mode 100755 jpeg/jconfig.mac delete mode 100755 jpeg/jconfig.manx delete mode 100755 jpeg/jconfig.mc6 delete mode 100755 jpeg/jconfig.sas delete mode 100755 jpeg/jconfig.st delete mode 100755 jpeg/jconfig.txt delete mode 100755 jpeg/jconfig.vc delete mode 100755 jpeg/jconfig.vms delete mode 100755 jpeg/jconfig.wat delete mode 100755 jpeg/jcparam.c delete mode 100755 jpeg/jcprepct.c delete mode 100755 jpeg/jcsample.c delete mode 100755 jpeg/jctrans.c delete mode 100755 jpeg/jdapimin.c delete mode 100755 jpeg/jdapistd.c delete mode 100755 jpeg/jdarith.c delete mode 100755 jpeg/jdatadst.c delete mode 100755 jpeg/jdatasrc.c delete mode 100755 jpeg/jdcoefct.c delete mode 100755 jpeg/jdcolor.c delete mode 100755 jpeg/jdct.h delete mode 100755 jpeg/jddctmgr.c delete mode 100755 jpeg/jdhuff.c delete mode 100755 jpeg/jdinput.c delete mode 100755 jpeg/jdmainct.c delete mode 100755 jpeg/jdmarker.c delete mode 100755 jpeg/jdmaster.c delete mode 100755 jpeg/jdmerge.c delete mode 100755 jpeg/jdosaobj.txt delete mode 100755 jpeg/jdpostct.c delete mode 100755 jpeg/jdsample.c delete mode 100755 jpeg/jdtrans.c delete mode 100755 jpeg/jerror.c delete mode 100755 jpeg/jerror.h delete mode 100755 jpeg/jfdctflt.c delete mode 100755 jpeg/jfdctfst.c delete mode 100755 jpeg/jfdctint.c delete mode 100755 jpeg/jidctflt.c delete mode 100755 jpeg/jidctfst.c delete mode 100755 jpeg/jidctint.c delete mode 100755 jpeg/jinclude.h delete mode 100755 jpeg/jmemansi.c delete mode 100755 jpeg/jmemdos.c delete mode 100755 jpeg/jmemdosa.asm delete mode 100755 jpeg/jmemmac.c delete mode 100755 jpeg/jmemmgr.c delete mode 100755 jpeg/jmemname.c delete mode 100755 jpeg/jmemnobs.c delete mode 100755 jpeg/jmemsys.h delete mode 100755 jpeg/jmorecfg.h delete mode 100755 jpeg/jpegint.h delete mode 100755 jpeg/jpeglib.h delete mode 100755 jpeg/jpegsr8d.zip delete mode 100755 jpeg/jpegtran.1 delete mode 100755 jpeg/jpegtran.c delete mode 100755 jpeg/jquant1.c delete mode 100755 jpeg/jquant2.c delete mode 100755 jpeg/jutils.c delete mode 100755 jpeg/jversion.h delete mode 100755 jpeg/libjpeg.map delete mode 100755 jpeg/libjpeg.txt delete mode 100755 jpeg/ltmain.sh delete mode 100755 jpeg/makcjpeg.st delete mode 100755 jpeg/makdjpeg.st delete mode 100755 jpeg/makeadsw.vc6 delete mode 100755 jpeg/makeasln.v10 delete mode 100755 jpeg/makecdep.vc6 delete mode 100755 jpeg/makecdsp.vc6 delete mode 100755 jpeg/makecfil.v10 delete mode 100755 jpeg/makecmak.vc6 delete mode 100755 jpeg/makecvcx.v10 delete mode 100755 jpeg/makeddep.vc6 delete mode 100755 jpeg/makeddsp.vc6 delete mode 100755 jpeg/makedfil.v10 delete mode 100755 jpeg/makedmak.vc6 delete mode 100755 jpeg/makedvcx.v10 delete mode 100755 jpeg/makefile.ansi delete mode 100755 jpeg/makefile.bcc delete mode 100755 jpeg/makefile.dj delete mode 100755 jpeg/makefile.manx delete mode 100755 jpeg/makefile.mc6 delete mode 100755 jpeg/makefile.mms delete mode 100755 jpeg/makefile.sas delete mode 100755 jpeg/makefile.unix delete mode 100755 jpeg/makefile.vc delete mode 100755 jpeg/makefile.vms delete mode 100755 jpeg/makefile.wat delete mode 100755 jpeg/makejdep.vc6 delete mode 100755 jpeg/makejdsp.vc6 delete mode 100755 jpeg/makejdsw.vc6 delete mode 100755 jpeg/makejfil.v10 delete mode 100755 jpeg/makejmak.vc6 delete mode 100755 jpeg/makejsln.v10 delete mode 100755 jpeg/makejvcx.v10 delete mode 100755 jpeg/makeproj.mac delete mode 100755 jpeg/makerdep.vc6 delete mode 100755 jpeg/makerdsp.vc6 delete mode 100755 jpeg/makerfil.v10 delete mode 100755 jpeg/makermak.vc6 delete mode 100755 jpeg/makervcx.v10 delete mode 100755 jpeg/maketdep.vc6 delete mode 100755 jpeg/maketdsp.vc6 delete mode 100755 jpeg/maketfil.v10 delete mode 100755 jpeg/maketmak.vc6 delete mode 100755 jpeg/maketvcx.v10 delete mode 100755 jpeg/makewdep.vc6 delete mode 100755 jpeg/makewdsp.vc6 delete mode 100755 jpeg/makewfil.v10 delete mode 100755 jpeg/makewmak.vc6 delete mode 100755 jpeg/makewvcx.v10 delete mode 100755 jpeg/makljpeg.st delete mode 100755 jpeg/maktjpeg.st delete mode 100755 jpeg/makvms.opt delete mode 100755 jpeg/missing delete mode 100755 jpeg/rdbmp.c delete mode 100755 jpeg/rdcolmap.c delete mode 100755 jpeg/rdgif.c delete mode 100755 jpeg/rdjpgcom.1 delete mode 100755 jpeg/rdjpgcom.c delete mode 100755 jpeg/rdppm.c delete mode 100755 jpeg/rdrle.c delete mode 100755 jpeg/rdswitch.c delete mode 100755 jpeg/rdtarga.c delete mode 100755 jpeg/readme.dos delete mode 100755 jpeg/structure.txt delete mode 100755 jpeg/testimg.bmp delete mode 100755 jpeg/testimg.jpg delete mode 100755 jpeg/testimg.ppm delete mode 100755 jpeg/testimgp.jpg delete mode 100755 jpeg/testorig.jpg delete mode 100755 jpeg/testprog.jpg delete mode 100755 jpeg/transupp.c delete mode 100755 jpeg/transupp.h delete mode 100755 jpeg/usage.txt delete mode 100755 jpeg/wizard.txt delete mode 100755 jpeg/wrbmp.c delete mode 100755 jpeg/wrgif.c delete mode 100755 jpeg/wrjpgcom.1 delete mode 100755 jpeg/wrjpgcom.c delete mode 100755 jpeg/wrppm.c delete mode 100755 jpeg/wrrle.c delete mode 100755 jpeg/wrtarga.c (limited to 'jpeg') diff --git a/jpeg/Jamfile b/jpeg/Jamfile deleted file mode 100755 index 5f9a91c..0000000 --- a/jpeg/Jamfile +++ /dev/null @@ -1,26 +0,0 @@ - -#PREF_CCFLAGS = $(CCOPTFLAG) ; # Turn optimisation on -PREF_CCFLAGS = $(CCDEBUGFLAG) ; # Debugging flags -PREF_LINKFLAGS = $(LINKDEBUGFLAG) ; - -# Run configure if it seems to be needed -if $(UNIX) { - GenFileNND jconfig.h : "(cd $(SUBDIR); chmod +x configure ; ./configure)" : configure ; -} - -# else copy them -if $(NT) { - File jconfig.h : jconfig.vc ; -} - -# jpg library -LIBSRCS = jcapimin.c jcapistd.c jdapimin.c jdapistd.c jcomapi.c jcparam.c jctrans.c - jdtrans.c jcinit.c jcmaster.c jcmainct.c jcprepct.c jccoefct.c jccolor.c - jcsample.c jcdctmgr.c jfdctint.c jfdctfst.c jfdctflt.c jchuff.c jcarith.c - jcmarker.c jdatadst.c jdmaster.c jdinput.c jdmainct.c jdcoefct.c jdpostct.c - jdmarker.c jdhuff.c jdarith.c jddctmgr.c jidctint.c jidctfst.c jidctflt.c - jdsample.c jdcolor.c jdmerge.c jquant1.c jquant2.c jdatasrc.c jaricom.c - jerror.c jmemmgr.c jutils.c jmemmgr.c jmemnobs.c ; - -Library libjpeg : $(LIBSRCS) ; - diff --git a/jpeg/Makefile.am b/jpeg/Makefile.am deleted file mode 100755 index 42cff57..0000000 --- a/jpeg/Makefile.am +++ /dev/null @@ -1,134 +0,0 @@ -## Process this file with automake to produce Makefile.in -# -# Automake Makefile for the JPEG library -# -# This file is written by Bob Friesenhahn, Guido Vollbeding -# - -# Sources to build library -LIBSOURCES = jaricom.c jcapimin.c jcapistd.c jcarith.c jccoefct.c jccolor.c \ - jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c \ - jcomapi.c jcparam.c jcprepct.c jcsample.c jctrans.c jdapimin.c \ - jdapistd.c jdarith.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c \ - jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c \ - jdmerge.c jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c \ - jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c jquant1.c \ - jquant2.c jutils.c jmemmgr.c @MEMORYMGR@.c - -# System dependent sources -SYSDEPSOURCES = jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c - -# Headers which are installed to support the library -INSTINCLUDES = jerror.h jmorecfg.h jpeglib.h - -# Headers which are not installed -OTHERINCLUDES = cderror.h cdjpeg.h jdct.h jinclude.h jmemsys.h jpegint.h \ - jversion.h transupp.h - -# Manual pages (Automake uses 'MANS' for itself) -DISTMANS= cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 wrjpgcom.1 - -# Other documentation files -DOCS= README install.txt usage.txt wizard.txt example.c libjpeg.txt \ - structure.txt coderules.txt filelist.txt change.log - -# Makefiles for various systems -MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.bcc \ - makefile.mc6 makefile.dj makefile.wat makefile.vc makejdsw.vc6 \ - makeadsw.vc6 makejdep.vc6 makejdsp.vc6 makejmak.vc6 makecdep.vc6 \ - makecdsp.vc6 makecmak.vc6 makeddep.vc6 makeddsp.vc6 makedmak.vc6 \ - maketdep.vc6 maketdsp.vc6 maketmak.vc6 makerdep.vc6 makerdsp.vc6 \ - makermak.vc6 makewdep.vc6 makewdsp.vc6 makewmak.vc6 makejsln.v10 \ - makeasln.v10 makejvcx.v10 makejfil.v10 makecvcx.v10 makecfil.v10 \ - makedvcx.v10 makedfil.v10 maketvcx.v10 maketfil.v10 makervcx.v10 \ - makerfil.v10 makewvcx.v10 makewfil.v10 makeproj.mac makcjpeg.st \ - makdjpeg.st makljpeg.st maktjpeg.st makefile.manx makefile.sas \ - makefile.mms makefile.vms makvms.opt - -# Configuration files -CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \ - jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \ - jconfig.vms - -# Support scripts for configure -CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp missing - -# Miscellaneous support files -OTHERFILES= jconfig.txt ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm \ - libjpeg.map - -# Test support files -TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \ - testimgp.jpg - -# libtool libraries to build -lib_LTLIBRARIES = libjpeg.la - -# Library sources for libjpeg.la -libjpeg_la_SOURCES = $(LIBSOURCES) - -# LDFLAGS for libjpeg.la -libjpeg_la_LDFLAGS = -no-undefined \ - -version-info $(JPEG_LIB_VERSION) - -if HAVE_LD_VERSION_SCRIPT - libjpeg_la_LDFLAGS += -Wl,--version-script=$(srcdir)/libjpeg.map -endif - -# Executables to build -bin_PROGRAMS = cjpeg djpeg jpegtran rdjpgcom wrjpgcom - -# Executable sources & libs -cjpeg_SOURCES = cjpeg.c rdppm.c rdgif.c rdtarga.c rdrle.c rdbmp.c \ - rdswitch.c cdjpeg.c -cjpeg_LDADD = libjpeg.la -djpeg_SOURCES = djpeg.c wrppm.c wrgif.c wrtarga.c wrrle.c wrbmp.c \ - rdcolmap.c cdjpeg.c -djpeg_LDADD = libjpeg.la -jpegtran_SOURCES = jpegtran.c rdswitch.c cdjpeg.c transupp.c -jpegtran_LDADD = libjpeg.la -rdjpgcom_SOURCES = rdjpgcom.c -wrjpgcom_SOURCES = wrjpgcom.c - -# Manual pages to install -man_MANS = $(DISTMANS) - -# Headers to install -include_HEADERS = $(INSTINCLUDES) - -# Other distributed headers -noinst_HEADERS = $(OTHERINCLUDES) - -# Other distributed files -EXTRA_DIST = $(DOCS) $(DISTMANS) $(MKFILES) $(CONFIGFILES) $(SYSDEPSOURCES) \ - $(OTHERFILES) $(TESTFILES) - -# Files to be cleaned -CLEANFILES = testout.ppm testout.bmp testout.jpg testoutp.ppm testoutp.jpg \ - testoutt.jpg - -# Install jconfig.h -install-data-local: - $(mkinstalldirs) $(DESTDIR)$(includedir) - $(INSTALL_HEADER) jconfig.h $(DESTDIR)$(includedir)/jconfig.h - -# Uninstall jconfig.h -uninstall-local: - rm -f $(DESTDIR)$(includedir)/jconfig.h - -# Run tests -test: check-local -check-local: - rm -f testout* - ./djpeg -dct int -ppm -outfile testout.ppm $(srcdir)/testorig.jpg - ./djpeg -dct int -bmp -colors 256 -outfile testout.bmp $(srcdir)/testorig.jpg - ./cjpeg -dct int -outfile testout.jpg $(srcdir)/testimg.ppm - ./djpeg -dct int -ppm -outfile testoutp.ppm $(srcdir)/testprog.jpg - ./cjpeg -dct int -progressive -opt -outfile testoutp.jpg $(srcdir)/testimg.ppm - ./jpegtran -outfile testoutt.jpg $(srcdir)/testprog.jpg - cmp $(srcdir)/testimg.ppm testout.ppm - cmp $(srcdir)/testimg.bmp testout.bmp - cmp $(srcdir)/testimg.jpg testout.jpg - cmp $(srcdir)/testimg.ppm testoutp.ppm - cmp $(srcdir)/testimgp.jpg testoutp.jpg - cmp $(srcdir)/testorig.jpg testoutt.jpg diff --git a/jpeg/Makefile.in b/jpeg/Makefile.in deleted file mode 100755 index 5bda1fb..0000000 --- a/jpeg/Makefile.in +++ /dev/null @@ -1,1094 +0,0 @@ -# Makefile.in generated by automake 1.11.2 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software -# Foundation, Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -# -# Automake Makefile for the JPEG library -# -# This file is written by Bob Friesenhahn, Guido Vollbeding -# - - - -VPATH = @srcdir@ -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -target_triplet = @target@ -ANSI2KNR = @ANSI2KNR@ -@HAVE_LD_VERSION_SCRIPT_TRUE@am__append_1 = -Wl,--version-script=$(srcdir)/libjpeg.map -bin_PROGRAMS = cjpeg$(EXEEXT) djpeg$(EXEEXT) jpegtran$(EXEEXT) \ - rdjpgcom$(EXEEXT) wrjpgcom$(EXEEXT) -subdir = . -DIST_COMMON = README $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ - $(top_srcdir)/configure $(am__configure_deps) \ - $(srcdir)/jconfig.cfg ansi2knr.c ansi2knr.1 depcomp \ - $(include_HEADERS) $(noinst_HEADERS) -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ - configure.lineno config.status.lineno -mkinstalldirs = $(install_sh) -d -CONFIG_HEADER = jconfig.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; -am__vpath_adj = case $$p in \ - $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ - *) f=$$p;; \ - esac; -am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; -am__install_max = 40 -am__nobase_strip_setup = \ - srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` -am__nobase_strip = \ - for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" -am__nobase_list = $(am__nobase_strip_setup); \ - for p in $$list; do echo "$$p $$p"; done | \ - sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ - $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ - if (++n[$$2] == $(am__install_max)) \ - { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ - END { for (dir in files) print dir, files[dir] }' -am__base_list = \ - sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ - sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' -am__uninstall_files_from_dir = { \ - test -z "$$files" \ - || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ - || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ - $(am__cd) "$$dir" && rm -f $$files; }; \ - } -am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" \ - "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(includedir)" -LTLIBRARIES = $(lib_LTLIBRARIES) -libjpeg_la_LIBADD = -am__objects_1 = jaricom$U.lo jcapimin$U.lo jcapistd$U.lo jcarith$U.lo \ - jccoefct$U.lo jccolor$U.lo jcdctmgr$U.lo jchuff$U.lo \ - jcinit$U.lo jcmainct$U.lo jcmarker$U.lo jcmaster$U.lo \ - jcomapi$U.lo jcparam$U.lo jcprepct$U.lo jcsample$U.lo \ - jctrans$U.lo jdapimin$U.lo jdapistd$U.lo jdarith$U.lo \ - jdatadst$U.lo jdatasrc$U.lo jdcoefct$U.lo jdcolor$U.lo \ - jddctmgr$U.lo jdhuff$U.lo jdinput$U.lo jdmainct$U.lo \ - jdmarker$U.lo jdmaster$U.lo jdmerge$U.lo jdpostct$U.lo \ - jdsample$U.lo jdtrans$U.lo jerror$U.lo jfdctflt$U.lo \ - jfdctfst$U.lo jfdctint$U.lo jidctflt$U.lo jidctfst$U.lo \ - jidctint$U.lo jquant1$U.lo jquant2$U.lo jutils$U.lo \ - jmemmgr$U.lo @MEMORYMGR@$U.lo -am_libjpeg_la_OBJECTS = $(am__objects_1) -libjpeg_la_OBJECTS = $(am_libjpeg_la_OBJECTS) -AM_V_lt = $(am__v_lt_$(V)) -am__v_lt_ = $(am__v_lt_$(AM_DEFAULT_VERBOSITY)) -am__v_lt_0 = --silent -libjpeg_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ - $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ - $(libjpeg_la_LDFLAGS) $(LDFLAGS) -o $@ -PROGRAMS = $(bin_PROGRAMS) -am_cjpeg_OBJECTS = cjpeg$U.$(OBJEXT) rdppm$U.$(OBJEXT) \ - rdgif$U.$(OBJEXT) rdtarga$U.$(OBJEXT) rdrle$U.$(OBJEXT) \ - rdbmp$U.$(OBJEXT) rdswitch$U.$(OBJEXT) cdjpeg$U.$(OBJEXT) -cjpeg_OBJECTS = $(am_cjpeg_OBJECTS) -cjpeg_DEPENDENCIES = libjpeg.la -am_djpeg_OBJECTS = djpeg$U.$(OBJEXT) wrppm$U.$(OBJEXT) \ - wrgif$U.$(OBJEXT) wrtarga$U.$(OBJEXT) wrrle$U.$(OBJEXT) \ - wrbmp$U.$(OBJEXT) rdcolmap$U.$(OBJEXT) cdjpeg$U.$(OBJEXT) -djpeg_OBJECTS = $(am_djpeg_OBJECTS) -djpeg_DEPENDENCIES = libjpeg.la -am_jpegtran_OBJECTS = jpegtran$U.$(OBJEXT) rdswitch$U.$(OBJEXT) \ - cdjpeg$U.$(OBJEXT) transupp$U.$(OBJEXT) -jpegtran_OBJECTS = $(am_jpegtran_OBJECTS) -jpegtran_DEPENDENCIES = libjpeg.la -am_rdjpgcom_OBJECTS = rdjpgcom$U.$(OBJEXT) -rdjpgcom_OBJECTS = $(am_rdjpgcom_OBJECTS) -rdjpgcom_LDADD = $(LDADD) -am_wrjpgcom_OBJECTS = wrjpgcom$U.$(OBJEXT) -wrjpgcom_OBJECTS = $(am_wrjpgcom_OBJECTS) -wrjpgcom_LDADD = $(LDADD) -DEFAULT_INCLUDES = -I.@am__isrc@ -depcomp = $(SHELL) $(top_srcdir)/depcomp -am__depfiles_maybe = depfiles -am__mv = mv -f -COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ - $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ - $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \ - $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ - $(AM_CFLAGS) $(CFLAGS) -AM_V_CC = $(am__v_CC_$(V)) -am__v_CC_ = $(am__v_CC_$(AM_DEFAULT_VERBOSITY)) -am__v_CC_0 = @echo " CC " $@; -AM_V_at = $(am__v_at_$(V)) -am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) -am__v_at_0 = @ -CCLD = $(CC) -LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ - $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ - $(AM_LDFLAGS) $(LDFLAGS) -o $@ -AM_V_CCLD = $(am__v_CCLD_$(V)) -am__v_CCLD_ = $(am__v_CCLD_$(AM_DEFAULT_VERBOSITY)) -am__v_CCLD_0 = @echo " CCLD " $@; -AM_V_GEN = $(am__v_GEN_$(V)) -am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) -am__v_GEN_0 = @echo " GEN " $@; -SOURCES = $(libjpeg_la_SOURCES) $(cjpeg_SOURCES) $(djpeg_SOURCES) \ - $(jpegtran_SOURCES) $(rdjpgcom_SOURCES) $(wrjpgcom_SOURCES) -man1dir = $(mandir)/man1 -NROFF = nroff -MANS = $(man_MANS) -HEADERS = $(include_HEADERS) $(noinst_HEADERS) -ETAGS = etags -CTAGS = ctags -ACLOCAL = @ACLOCAL@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -AS = @AS@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FGREP = @FGREP@ -GREP = @GREP@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -JPEG_LIB_VERSION = @JPEG_LIB_VERSION@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -MAINT = @MAINT@ -MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ -MEMORYMGR = @MEMORYMGR@ -MKDIR_P = @MKDIR_P@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -RANLIB = @RANLIB@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -U = @U@ -VERSION = @VERSION@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target = @target@ -target_alias = @target_alias@ -target_cpu = @target_cpu@ -target_os = @target_os@ -target_vendor = @target_vendor@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ - -# Sources to build library -LIBSOURCES = jaricom.c jcapimin.c jcapistd.c jcarith.c jccoefct.c jccolor.c \ - jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c \ - jcomapi.c jcparam.c jcprepct.c jcsample.c jctrans.c jdapimin.c \ - jdapistd.c jdarith.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c \ - jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c \ - jdmerge.c jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c \ - jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c jquant1.c \ - jquant2.c jutils.c jmemmgr.c @MEMORYMGR@.c - - -# System dependent sources -SYSDEPSOURCES = jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c - -# Headers which are installed to support the library -INSTINCLUDES = jerror.h jmorecfg.h jpeglib.h - -# Headers which are not installed -OTHERINCLUDES = cderror.h cdjpeg.h jdct.h jinclude.h jmemsys.h jpegint.h \ - jversion.h transupp.h - - -# Manual pages (Automake uses 'MANS' for itself) -DISTMANS = cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 wrjpgcom.1 - -# Other documentation files -DOCS = README install.txt usage.txt wizard.txt example.c libjpeg.txt \ - structure.txt coderules.txt filelist.txt change.log - - -# Makefiles for various systems -MKFILES = configure Makefile.in makefile.ansi makefile.unix makefile.bcc \ - makefile.mc6 makefile.dj makefile.wat makefile.vc makejdsw.vc6 \ - makeadsw.vc6 makejdep.vc6 makejdsp.vc6 makejmak.vc6 makecdep.vc6 \ - makecdsp.vc6 makecmak.vc6 makeddep.vc6 makeddsp.vc6 makedmak.vc6 \ - maketdep.vc6 maketdsp.vc6 maketmak.vc6 makerdep.vc6 makerdsp.vc6 \ - makermak.vc6 makewdep.vc6 makewdsp.vc6 makewmak.vc6 makejsln.v10 \ - makeasln.v10 makejvcx.v10 makejfil.v10 makecvcx.v10 makecfil.v10 \ - makedvcx.v10 makedfil.v10 maketvcx.v10 maketfil.v10 makervcx.v10 \ - makerfil.v10 makewvcx.v10 makewfil.v10 makeproj.mac makcjpeg.st \ - makdjpeg.st makljpeg.st maktjpeg.st makefile.manx makefile.sas \ - makefile.mms makefile.vms makvms.opt - - -# Configuration files -CONFIGFILES = jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \ - jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \ - jconfig.vms - - -# Support scripts for configure -CONFIGUREFILES = config.guess config.sub install-sh ltmain.sh depcomp missing - -# Miscellaneous support files -OTHERFILES = jconfig.txt ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm \ - libjpeg.map - - -# Test support files -TESTFILES = testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \ - testimgp.jpg - - -# libtool libraries to build -lib_LTLIBRARIES = libjpeg.la - -# Library sources for libjpeg.la -libjpeg_la_SOURCES = $(LIBSOURCES) - -# LDFLAGS for libjpeg.la -libjpeg_la_LDFLAGS = -no-undefined -version-info $(JPEG_LIB_VERSION) \ - $(am__append_1) - -# Executable sources & libs -cjpeg_SOURCES = cjpeg.c rdppm.c rdgif.c rdtarga.c rdrle.c rdbmp.c \ - rdswitch.c cdjpeg.c - -cjpeg_LDADD = libjpeg.la -djpeg_SOURCES = djpeg.c wrppm.c wrgif.c wrtarga.c wrrle.c wrbmp.c \ - rdcolmap.c cdjpeg.c - -djpeg_LDADD = libjpeg.la -jpegtran_SOURCES = jpegtran.c rdswitch.c cdjpeg.c transupp.c -jpegtran_LDADD = libjpeg.la -rdjpgcom_SOURCES = rdjpgcom.c -wrjpgcom_SOURCES = wrjpgcom.c - -# Manual pages to install -man_MANS = $(DISTMANS) - -# Headers to install -include_HEADERS = $(INSTINCLUDES) - -# Other distributed headers -noinst_HEADERS = $(OTHERINCLUDES) - -# Other distributed files -EXTRA_DIST = $(DOCS) $(DISTMANS) $(MKFILES) $(CONFIGFILES) $(SYSDEPSOURCES) \ - $(OTHERFILES) $(TESTFILES) - - -# Files to be cleaned -CLEANFILES = testout.ppm testout.bmp testout.jpg testoutp.ppm testoutp.jpg \ - testoutt.jpg - -all: jconfig.h - $(MAKE) $(AM_MAKEFLAGS) all-am - -.SUFFIXES: -.SUFFIXES: .c .lo .o .obj -am--refresh: Makefile - @: -$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ - $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ - && exit 0; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - echo ' $(SHELL) ./config.status'; \ - $(SHELL) ./config.status;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - $(SHELL) ./config.status --recheck - -$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) - $(am__cd) $(srcdir) && $(AUTOCONF) -$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) - $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) -$(am__aclocal_m4_deps): - -jconfig.h: stamp-h1 - @if test ! -f $@; then rm -f stamp-h1; else :; fi - @if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi - -stamp-h1: $(srcdir)/jconfig.cfg $(top_builddir)/config.status - @rm -f stamp-h1 - cd $(top_builddir) && $(SHELL) ./config.status jconfig.h -$(srcdir)/jconfig.cfg: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) - ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) - rm -f stamp-h1 - touch $@ - -distclean-hdr: - -rm -f jconfig.h stamp-h1 -install-libLTLIBRARIES: $(lib_LTLIBRARIES) - @$(NORMAL_INSTALL) - test -z "$(libdir)" || $(MKDIR_P) "$(DESTDIR)$(libdir)" - @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \ - list2=; for p in $$list; do \ - if test -f $$p; then \ - list2="$$list2 $$p"; \ - else :; fi; \ - done; \ - test -z "$$list2" || { \ - echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \ - $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \ - } - -uninstall-libLTLIBRARIES: - @$(NORMAL_UNINSTALL) - @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \ - for p in $$list; do \ - $(am__strip_dir) \ - echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \ - $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \ - done - -clean-libLTLIBRARIES: - -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES) - @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ - dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ - test "$$dir" != "$$p" || dir=.; \ - echo "rm -f \"$${dir}/so_locations\""; \ - rm -f "$${dir}/so_locations"; \ - done -libjpeg.la: $(libjpeg_la_OBJECTS) $(libjpeg_la_DEPENDENCIES) - $(AM_V_CCLD)$(libjpeg_la_LINK) -rpath $(libdir) $(libjpeg_la_OBJECTS) $(libjpeg_la_LIBADD) $(LIBS) -install-binPROGRAMS: $(bin_PROGRAMS) - @$(NORMAL_INSTALL) - test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)" - @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ - for p in $$list; do echo "$$p $$p"; done | \ - sed 's/$(EXEEXT)$$//' | \ - while read p p1; do if test -f $$p || test -f $$p1; \ - then echo "$$p"; echo "$$p"; else :; fi; \ - done | \ - sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \ - -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ - sed 'N;N;N;s,\n, ,g' | \ - $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ - { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ - if ($$2 == $$4) files[d] = files[d] " " $$1; \ - else { print "f", $$3 "/" $$4, $$1; } } \ - END { for (d in files) print "f", d, files[d] }' | \ - while read type dir files; do \ - if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ - test -z "$$files" || { \ - echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \ - $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \ - } \ - ; done - -uninstall-binPROGRAMS: - @$(NORMAL_UNINSTALL) - @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ - files=`for p in $$list; do echo "$$p"; done | \ - sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ - -e 's/$$/$(EXEEXT)/' `; \ - test -n "$$list" || exit 0; \ - echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \ - cd "$(DESTDIR)$(bindir)" && rm -f $$files - -clean-binPROGRAMS: - @list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \ - echo " rm -f" $$list; \ - rm -f $$list || exit $$?; \ - test -n "$(EXEEXT)" || exit 0; \ - list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ - echo " rm -f" $$list; \ - rm -f $$list -cjpeg$(EXEEXT): $(cjpeg_OBJECTS) $(cjpeg_DEPENDENCIES) - @rm -f cjpeg$(EXEEXT) - $(AM_V_CCLD)$(LINK) $(cjpeg_OBJECTS) $(cjpeg_LDADD) $(LIBS) -djpeg$(EXEEXT): $(djpeg_OBJECTS) $(djpeg_DEPENDENCIES) - @rm -f djpeg$(EXEEXT) - $(AM_V_CCLD)$(LINK) $(djpeg_OBJECTS) $(djpeg_LDADD) $(LIBS) -jpegtran$(EXEEXT): $(jpegtran_OBJECTS) $(jpegtran_DEPENDENCIES) - @rm -f jpegtran$(EXEEXT) - $(AM_V_CCLD)$(LINK) $(jpegtran_OBJECTS) $(jpegtran_LDADD) $(LIBS) -rdjpgcom$(EXEEXT): $(rdjpgcom_OBJECTS) $(rdjpgcom_DEPENDENCIES) - @rm -f rdjpgcom$(EXEEXT) - $(AM_V_CCLD)$(LINK) $(rdjpgcom_OBJECTS) $(rdjpgcom_LDADD) $(LIBS) -wrjpgcom$(EXEEXT): $(wrjpgcom_OBJECTS) $(wrjpgcom_DEPENDENCIES) - @rm -f wrjpgcom$(EXEEXT) - $(AM_V_CCLD)$(LINK) $(wrjpgcom_OBJECTS) $(wrjpgcom_LDADD) $(LIBS) - -mostlyclean-compile: - -rm -f *.$(OBJEXT) - -distclean-compile: - -rm -f *.tab.c -./ansi2knr: ansi2knr.$(OBJEXT) - $(LINK) ansi2knr.$(OBJEXT) $(LIBS) -ansi2knr.$(OBJEXT): $(CONFIG_HEADER) - -clean-krextra: - -rm -f ansi2knr - -mostlyclean-kr: - -test "$U" = "" || rm -f *_.c - -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/@MEMORYMGR@$U.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cdjpeg$U.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cjpeg$U.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/djpeg$U.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jaricom$U.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcapimin$U.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcapistd$U.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcarith$U.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jccoefct$U.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jccolor$U.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcdctmgr$U.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jchuff$U.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcinit$U.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcmainct$U.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcmarker$U.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcmaster$U.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcomapi$U.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcparam$U.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcprepct$U.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcsample$U.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jctrans$U.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdapimin$U.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdapistd$U.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdarith$U.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdatadst$U.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdatasrc$U.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdcoefct$U.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdcolor$U.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jddctmgr$U.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdhuff$U.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdinput$U.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdmainct$U.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdmarker$U.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdmaster$U.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdmerge$U.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdpostct$U.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdsample$U.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdtrans$U.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jerror$U.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jfdctflt$U.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jfdctfst$U.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jfdctint$U.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jidctflt$U.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jidctfst$U.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jidctint$U.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jmemmgr$U.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jpegtran$U.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jquant1$U.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jquant2$U.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jutils$U.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rdbmp$U.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rdcolmap$U.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rdgif$U.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rdjpgcom$U.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rdppm$U.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rdrle$U.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rdswitch$U.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rdtarga$U.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/transupp$U.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wrbmp$U.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wrgif$U.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wrjpgcom$U.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wrppm$U.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wrrle$U.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wrtarga$U.Po@am__quote@ - -.c.o: -@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c $< - -.c.obj: -@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c `$(CYGPATH_W) '$<'` - -.c.lo: -@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $< -@MEMORYMGR@_.c: @MEMORYMGR@.c $(ANSI2KNR) - $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/@MEMORYMGR@.c; then echo $(srcdir)/@MEMORYMGR@.c; else echo @MEMORYMGR@.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@ -cdjpeg_.c: cdjpeg.c $(ANSI2KNR) - $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/cdjpeg.c; then echo $(srcdir)/cdjpeg.c; else echo cdjpeg.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@ -cjpeg_.c: cjpeg.c $(ANSI2KNR) - $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/cjpeg.c; then echo $(srcdir)/cjpeg.c; else echo cjpeg.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@ -djpeg_.c: djpeg.c $(ANSI2KNR) - $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/djpeg.c; then echo $(srcdir)/djpeg.c; else echo djpeg.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@ -jaricom_.c: jaricom.c $(ANSI2KNR) - $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jaricom.c; then echo $(srcdir)/jaricom.c; else echo jaricom.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@ -jcapimin_.c: jcapimin.c $(ANSI2KNR) - $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jcapimin.c; then echo $(srcdir)/jcapimin.c; else echo jcapimin.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@ -jcapistd_.c: jcapistd.c $(ANSI2KNR) - $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jcapistd.c; then echo $(srcdir)/jcapistd.c; else echo jcapistd.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@ -jcarith_.c: jcarith.c $(ANSI2KNR) - $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jcarith.c; then echo $(srcdir)/jcarith.c; else echo jcarith.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@ -jccoefct_.c: jccoefct.c $(ANSI2KNR) - $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jccoefct.c; then echo $(srcdir)/jccoefct.c; else echo jccoefct.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@ -jccolor_.c: jccolor.c $(ANSI2KNR) - $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jccolor.c; then echo $(srcdir)/jccolor.c; else echo jccolor.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@ -jcdctmgr_.c: jcdctmgr.c $(ANSI2KNR) - $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jcdctmgr.c; then echo $(srcdir)/jcdctmgr.c; else echo jcdctmgr.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@ -jchuff_.c: jchuff.c $(ANSI2KNR) - $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jchuff.c; then echo $(srcdir)/jchuff.c; else echo jchuff.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@ -jcinit_.c: jcinit.c $(ANSI2KNR) - $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jcinit.c; then echo $(srcdir)/jcinit.c; else echo jcinit.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@ -jcmainct_.c: jcmainct.c $(ANSI2KNR) - $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jcmainct.c; then echo $(srcdir)/jcmainct.c; else echo jcmainct.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@ -jcmarker_.c: jcmarker.c $(ANSI2KNR) - $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jcmarker.c; then echo $(srcdir)/jcmarker.c; else echo jcmarker.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@ -jcmaster_.c: jcmaster.c $(ANSI2KNR) - $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jcmaster.c; then echo $(srcdir)/jcmaster.c; else echo jcmaster.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@ -jcomapi_.c: jcomapi.c $(ANSI2KNR) - $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jcomapi.c; then echo $(srcdir)/jcomapi.c; else echo jcomapi.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@ -jcparam_.c: jcparam.c $(ANSI2KNR) - $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jcparam.c; then echo $(srcdir)/jcparam.c; else echo jcparam.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@ -jcprepct_.c: jcprepct.c $(ANSI2KNR) - $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jcprepct.c; then echo $(srcdir)/jcprepct.c; else echo jcprepct.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@ -jcsample_.c: jcsample.c $(ANSI2KNR) - $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jcsample.c; then echo $(srcdir)/jcsample.c; else echo jcsample.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@ -jctrans_.c: jctrans.c $(ANSI2KNR) - $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jctrans.c; then echo $(srcdir)/jctrans.c; else echo jctrans.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@ -jdapimin_.c: jdapimin.c $(ANSI2KNR) - $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jdapimin.c; then echo $(srcdir)/jdapimin.c; else echo jdapimin.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@ -jdapistd_.c: jdapistd.c $(ANSI2KNR) - $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jdapistd.c; then echo $(srcdir)/jdapistd.c; else echo jdapistd.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@ -jdarith_.c: jdarith.c $(ANSI2KNR) - $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jdarith.c; then echo $(srcdir)/jdarith.c; else echo jdarith.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@ -jdatadst_.c: jdatadst.c $(ANSI2KNR) - $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jdatadst.c; then echo $(srcdir)/jdatadst.c; else echo jdatadst.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@ -jdatasrc_.c: jdatasrc.c $(ANSI2KNR) - $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jdatasrc.c; then echo $(srcdir)/jdatasrc.c; else echo jdatasrc.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@ -jdcoefct_.c: jdcoefct.c $(ANSI2KNR) - $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jdcoefct.c; then echo $(srcdir)/jdcoefct.c; else echo jdcoefct.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@ -jdcolor_.c: jdcolor.c $(ANSI2KNR) - $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jdcolor.c; then echo $(srcdir)/jdcolor.c; else echo jdcolor.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@ -jddctmgr_.c: jddctmgr.c $(ANSI2KNR) - $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jddctmgr.c; then echo $(srcdir)/jddctmgr.c; else echo jddctmgr.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@ -jdhuff_.c: jdhuff.c $(ANSI2KNR) - $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jdhuff.c; then echo $(srcdir)/jdhuff.c; else echo jdhuff.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@ -jdinput_.c: jdinput.c $(ANSI2KNR) - $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jdinput.c; then echo $(srcdir)/jdinput.c; else echo jdinput.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@ -jdmainct_.c: jdmainct.c $(ANSI2KNR) - $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jdmainct.c; then echo $(srcdir)/jdmainct.c; else echo jdmainct.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@ -jdmarker_.c: jdmarker.c $(ANSI2KNR) - $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jdmarker.c; then echo $(srcdir)/jdmarker.c; else echo jdmarker.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@ -jdmaster_.c: jdmaster.c $(ANSI2KNR) - $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jdmaster.c; then echo $(srcdir)/jdmaster.c; else echo jdmaster.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@ -jdmerge_.c: jdmerge.c $(ANSI2KNR) - $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jdmerge.c; then echo $(srcdir)/jdmerge.c; else echo jdmerge.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@ -jdpostct_.c: jdpostct.c $(ANSI2KNR) - $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jdpostct.c; then echo $(srcdir)/jdpostct.c; else echo jdpostct.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@ -jdsample_.c: jdsample.c $(ANSI2KNR) - $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jdsample.c; then echo $(srcdir)/jdsample.c; else echo jdsample.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@ -jdtrans_.c: jdtrans.c $(ANSI2KNR) - $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jdtrans.c; then echo $(srcdir)/jdtrans.c; else echo jdtrans.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@ -jerror_.c: jerror.c $(ANSI2KNR) - $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jerror.c; then echo $(srcdir)/jerror.c; else echo jerror.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@ -jfdctflt_.c: jfdctflt.c $(ANSI2KNR) - $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jfdctflt.c; then echo $(srcdir)/jfdctflt.c; else echo jfdctflt.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@ -jfdctfst_.c: jfdctfst.c $(ANSI2KNR) - $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jfdctfst.c; then echo $(srcdir)/jfdctfst.c; else echo jfdctfst.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@ -jfdctint_.c: jfdctint.c $(ANSI2KNR) - $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jfdctint.c; then echo $(srcdir)/jfdctint.c; else echo jfdctint.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@ -jidctflt_.c: jidctflt.c $(ANSI2KNR) - $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jidctflt.c; then echo $(srcdir)/jidctflt.c; else echo jidctflt.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@ -jidctfst_.c: jidctfst.c $(ANSI2KNR) - $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jidctfst.c; then echo $(srcdir)/jidctfst.c; else echo jidctfst.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@ -jidctint_.c: jidctint.c $(ANSI2KNR) - $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jidctint.c; then echo $(srcdir)/jidctint.c; else echo jidctint.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@ -jmemmgr_.c: jmemmgr.c $(ANSI2KNR) - $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jmemmgr.c; then echo $(srcdir)/jmemmgr.c; else echo jmemmgr.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@ -jpegtran_.c: jpegtran.c $(ANSI2KNR) - $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jpegtran.c; then echo $(srcdir)/jpegtran.c; else echo jpegtran.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@ -jquant1_.c: jquant1.c $(ANSI2KNR) - $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jquant1.c; then echo $(srcdir)/jquant1.c; else echo jquant1.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@ -jquant2_.c: jquant2.c $(ANSI2KNR) - $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jquant2.c; then echo $(srcdir)/jquant2.c; else echo jquant2.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@ -jutils_.c: jutils.c $(ANSI2KNR) - $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jutils.c; then echo $(srcdir)/jutils.c; else echo jutils.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@ -rdbmp_.c: rdbmp.c $(ANSI2KNR) - $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/rdbmp.c; then echo $(srcdir)/rdbmp.c; else echo rdbmp.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@ -rdcolmap_.c: rdcolmap.c $(ANSI2KNR) - $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/rdcolmap.c; then echo $(srcdir)/rdcolmap.c; else echo rdcolmap.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@ -rdgif_.c: rdgif.c $(ANSI2KNR) - $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/rdgif.c; then echo $(srcdir)/rdgif.c; else echo rdgif.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@ -rdjpgcom_.c: rdjpgcom.c $(ANSI2KNR) - $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/rdjpgcom.c; then echo $(srcdir)/rdjpgcom.c; else echo rdjpgcom.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@ -rdppm_.c: rdppm.c $(ANSI2KNR) - $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/rdppm.c; then echo $(srcdir)/rdppm.c; else echo rdppm.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@ -rdrle_.c: rdrle.c $(ANSI2KNR) - $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/rdrle.c; then echo $(srcdir)/rdrle.c; else echo rdrle.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@ -rdswitch_.c: rdswitch.c $(ANSI2KNR) - $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/rdswitch.c; then echo $(srcdir)/rdswitch.c; else echo rdswitch.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@ -rdtarga_.c: rdtarga.c $(ANSI2KNR) - $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/rdtarga.c; then echo $(srcdir)/rdtarga.c; else echo rdtarga.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@ -transupp_.c: transupp.c $(ANSI2KNR) - $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/transupp.c; then echo $(srcdir)/transupp.c; else echo transupp.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@ -wrbmp_.c: wrbmp.c $(ANSI2KNR) - $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/wrbmp.c; then echo $(srcdir)/wrbmp.c; else echo wrbmp.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@ -wrgif_.c: wrgif.c $(ANSI2KNR) - $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/wrgif.c; then echo $(srcdir)/wrgif.c; else echo wrgif.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@ -wrjpgcom_.c: wrjpgcom.c $(ANSI2KNR) - $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/wrjpgcom.c; then echo $(srcdir)/wrjpgcom.c; else echo wrjpgcom.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@ -wrppm_.c: wrppm.c $(ANSI2KNR) - $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/wrppm.c; then echo $(srcdir)/wrppm.c; else echo wrppm.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@ -wrrle_.c: wrrle.c $(ANSI2KNR) - $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/wrrle.c; then echo $(srcdir)/wrrle.c; else echo wrrle.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@ -wrtarga_.c: wrtarga.c $(ANSI2KNR) - $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/wrtarga.c; then echo $(srcdir)/wrtarga.c; else echo wrtarga.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@ -@MEMORYMGR@_.$(OBJEXT) @MEMORYMGR@_.lo cdjpeg_.$(OBJEXT) cdjpeg_.lo \ -cjpeg_.$(OBJEXT) cjpeg_.lo djpeg_.$(OBJEXT) djpeg_.lo \ -jaricom_.$(OBJEXT) jaricom_.lo jcapimin_.$(OBJEXT) jcapimin_.lo \ -jcapistd_.$(OBJEXT) jcapistd_.lo jcarith_.$(OBJEXT) jcarith_.lo \ -jccoefct_.$(OBJEXT) jccoefct_.lo jccolor_.$(OBJEXT) jccolor_.lo \ -jcdctmgr_.$(OBJEXT) jcdctmgr_.lo jchuff_.$(OBJEXT) jchuff_.lo \ -jcinit_.$(OBJEXT) jcinit_.lo jcmainct_.$(OBJEXT) jcmainct_.lo \ -jcmarker_.$(OBJEXT) jcmarker_.lo jcmaster_.$(OBJEXT) jcmaster_.lo \ -jcomapi_.$(OBJEXT) jcomapi_.lo jcparam_.$(OBJEXT) jcparam_.lo \ -jcprepct_.$(OBJEXT) jcprepct_.lo jcsample_.$(OBJEXT) jcsample_.lo \ -jctrans_.$(OBJEXT) jctrans_.lo jdapimin_.$(OBJEXT) jdapimin_.lo \ -jdapistd_.$(OBJEXT) jdapistd_.lo jdarith_.$(OBJEXT) jdarith_.lo \ -jdatadst_.$(OBJEXT) jdatadst_.lo jdatasrc_.$(OBJEXT) jdatasrc_.lo \ -jdcoefct_.$(OBJEXT) jdcoefct_.lo jdcolor_.$(OBJEXT) jdcolor_.lo \ -jddctmgr_.$(OBJEXT) jddctmgr_.lo jdhuff_.$(OBJEXT) jdhuff_.lo \ -jdinput_.$(OBJEXT) jdinput_.lo jdmainct_.$(OBJEXT) jdmainct_.lo \ -jdmarker_.$(OBJEXT) jdmarker_.lo jdmaster_.$(OBJEXT) jdmaster_.lo \ -jdmerge_.$(OBJEXT) jdmerge_.lo jdpostct_.$(OBJEXT) jdpostct_.lo \ -jdsample_.$(OBJEXT) jdsample_.lo jdtrans_.$(OBJEXT) jdtrans_.lo \ -jerror_.$(OBJEXT) jerror_.lo jfdctflt_.$(OBJEXT) jfdctflt_.lo \ -jfdctfst_.$(OBJEXT) jfdctfst_.lo jfdctint_.$(OBJEXT) jfdctint_.lo \ -jidctflt_.$(OBJEXT) jidctflt_.lo jidctfst_.$(OBJEXT) jidctfst_.lo \ -jidctint_.$(OBJEXT) jidctint_.lo jmemmgr_.$(OBJEXT) jmemmgr_.lo \ -jpegtran_.$(OBJEXT) jpegtran_.lo jquant1_.$(OBJEXT) jquant1_.lo \ -jquant2_.$(OBJEXT) jquant2_.lo jutils_.$(OBJEXT) jutils_.lo \ -rdbmp_.$(OBJEXT) rdbmp_.lo rdcolmap_.$(OBJEXT) rdcolmap_.lo \ -rdgif_.$(OBJEXT) rdgif_.lo rdjpgcom_.$(OBJEXT) rdjpgcom_.lo \ -rdppm_.$(OBJEXT) rdppm_.lo rdrle_.$(OBJEXT) rdrle_.lo \ -rdswitch_.$(OBJEXT) rdswitch_.lo rdtarga_.$(OBJEXT) rdtarga_.lo \ -transupp_.$(OBJEXT) transupp_.lo wrbmp_.$(OBJEXT) wrbmp_.lo \ -wrgif_.$(OBJEXT) wrgif_.lo wrjpgcom_.$(OBJEXT) wrjpgcom_.lo \ -wrppm_.$(OBJEXT) wrppm_.lo wrrle_.$(OBJEXT) wrrle_.lo \ -wrtarga_.$(OBJEXT) wrtarga_.lo : $(ANSI2KNR) - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs - -distclean-libtool: - -rm -f libtool config.lt -install-man1: $(man_MANS) - @$(NORMAL_INSTALL) - test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)" - @list=''; test -n "$(man1dir)" || exit 0; \ - { for i in $$list; do echo "$$i"; done; \ - l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \ - sed -n '/\.1[a-z]*$$/p'; \ - } | while read p; do \ - if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; echo "$$p"; \ - done | \ - sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ - -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ - sed 'N;N;s,\n, ,g' | { \ - list=; while read file base inst; do \ - if test "$$base" = "$$inst"; then list="$$list $$file"; else \ - echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \ - $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \ - fi; \ - done; \ - for i in $$list; do echo "$$i"; done | $(am__base_list) | \ - while read files; do \ - test -z "$$files" || { \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \ - done; } - -uninstall-man1: - @$(NORMAL_UNINSTALL) - @list=''; test -n "$(man1dir)" || exit 0; \ - files=`{ for i in $$list; do echo "$$i"; done; \ - l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \ - sed -n '/\.1[a-z]*$$/p'; \ - } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ - -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ - dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir) -install-includeHEADERS: $(include_HEADERS) - @$(NORMAL_INSTALL) - test -z "$(includedir)" || $(MKDIR_P) "$(DESTDIR)$(includedir)" - @list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(includedir)'"; \ - $(INSTALL_HEADER) $$files "$(DESTDIR)$(includedir)" || exit $$?; \ - done - -uninstall-includeHEADERS: - @$(NORMAL_UNINSTALL) - @list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - dir='$(DESTDIR)$(includedir)'; $(am__uninstall_files_from_dir) - -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - mkid -fID $$unique -tags: TAGS - -TAGS: $(HEADERS) $(SOURCES) jconfig.cfg $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - set x; \ - here=`pwd`; \ - list='$(SOURCES) $(HEADERS) jconfig.cfg $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - shift; \ - if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - if test $$# -gt 0; then \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - "$$@" $$unique; \ - else \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$unique; \ - fi; \ - fi -ctags: CTAGS -CTAGS: $(HEADERS) $(SOURCES) jconfig.cfg $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - list='$(SOURCES) $(HEADERS) jconfig.cfg $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - test -z "$(CTAGS_ARGS)$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && $(am__cd) $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) "$$here" - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags -check-am: all-am - $(MAKE) $(AM_MAKEFLAGS) check-local -check: check-am -all-am: Makefile $(ANSI2KNR) $(LTLIBRARIES) $(PROGRAMS) $(MANS) \ - $(HEADERS) jconfig.h -install-binPROGRAMS: install-libLTLIBRARIES - -installdirs: - for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(includedir)"; do \ - test -z "$$dir" || $(MKDIR_P) "$$dir"; \ - done -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - if test -z '$(STRIP)'; then \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - install; \ - else \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ - fi -mostlyclean-generic: - -clean-generic: - -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-binPROGRAMS clean-generic clean-krextra \ - clean-libLTLIBRARIES clean-libtool mostlyclean-am - -distclean: distclean-am - -rm -f $(am__CONFIG_DISTCLEAN_FILES) - -rm -rf ./$(DEPDIR) - -rm -f Makefile -distclean-am: clean-am distclean-compile distclean-generic \ - distclean-hdr distclean-libtool distclean-tags - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: install-data-local install-includeHEADERS install-man - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: install-binPROGRAMS install-libLTLIBRARIES - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: install-man1 - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -f $(am__CONFIG_DISTCLEAN_FILES) - -rm -rf $(top_srcdir)/autom4te.cache - -rm -rf ./$(DEPDIR) - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-compile mostlyclean-generic mostlyclean-kr \ - mostlyclean-libtool - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: uninstall-binPROGRAMS uninstall-includeHEADERS \ - uninstall-libLTLIBRARIES uninstall-local uninstall-man - -uninstall-man: uninstall-man1 - -.MAKE: all check-am install-am install-strip - -.PHONY: CTAGS GTAGS all all-am am--refresh check check-am check-local \ - clean clean-binPROGRAMS clean-generic clean-krextra \ - clean-libLTLIBRARIES clean-libtool ctags distclean \ - distclean-compile distclean-generic distclean-hdr \ - distclean-libtool distclean-tags dvi dvi-am html html-am info \ - info-am install install-am install-binPROGRAMS install-data \ - install-data-am install-data-local install-dvi install-dvi-am \ - install-exec install-exec-am install-html install-html-am \ - install-includeHEADERS install-info install-info-am \ - install-libLTLIBRARIES install-man install-man1 install-pdf \ - install-pdf-am install-ps install-ps-am install-strip \ - installcheck installcheck-am installdirs maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-compile \ - mostlyclean-generic mostlyclean-kr mostlyclean-libtool pdf \ - pdf-am ps ps-am tags uninstall uninstall-am \ - uninstall-binPROGRAMS uninstall-includeHEADERS \ - uninstall-libLTLIBRARIES uninstall-local uninstall-man \ - uninstall-man1 - - -# Install jconfig.h -install-data-local: - $(mkinstalldirs) $(DESTDIR)$(includedir) - $(INSTALL_HEADER) jconfig.h $(DESTDIR)$(includedir)/jconfig.h - -# Uninstall jconfig.h -uninstall-local: - rm -f $(DESTDIR)$(includedir)/jconfig.h - -# Run tests -test: check-local -check-local: - rm -f testout* - ./djpeg -dct int -ppm -outfile testout.ppm $(srcdir)/testorig.jpg - ./djpeg -dct int -bmp -colors 256 -outfile testout.bmp $(srcdir)/testorig.jpg - ./cjpeg -dct int -outfile testout.jpg $(srcdir)/testimg.ppm - ./djpeg -dct int -ppm -outfile testoutp.ppm $(srcdir)/testprog.jpg - ./cjpeg -dct int -progressive -opt -outfile testoutp.jpg $(srcdir)/testimg.ppm - ./jpegtran -outfile testoutt.jpg $(srcdir)/testprog.jpg - cmp $(srcdir)/testimg.ppm testout.ppm - cmp $(srcdir)/testimg.bmp testout.bmp - cmp $(srcdir)/testimg.jpg testout.jpg - cmp $(srcdir)/testimg.ppm testoutp.ppm - cmp $(srcdir)/testimgp.jpg testoutp.jpg - cmp $(srcdir)/testorig.jpg testoutt.jpg - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/jpeg/README b/jpeg/README deleted file mode 100755 index 0a23c19..0000000 --- a/jpeg/README +++ /dev/null @@ -1,351 +0,0 @@ -The Independent JPEG Group's JPEG software -========================================== - -README for release 8d of 15-Jan-2012 -==================================== - -This distribution contains the eighth public release of the Independent JPEG -Group's free JPEG software. You are welcome to redistribute this software and -to use it for any purpose, subject to the conditions under LEGAL ISSUES, below. - -This software is the work of Tom Lane, Guido Vollbeding, Philip Gladstone, -Bill Allombert, Jim Boucher, Lee Crocker, Bob Friesenhahn, Ben Jackson, -Julian Minguillon, Luis Ortiz, George Phillips, Davide Rossi, Ge' Weijers, -and other members of the Independent JPEG Group. - -IJG is not affiliated with the ISO/IEC JTC1/SC29/WG1 standards committee -(also known as JPEG, together with ITU-T SG16). - - -DOCUMENTATION ROADMAP -===================== - -This file contains the following sections: - -OVERVIEW General description of JPEG and the IJG software. -LEGAL ISSUES Copyright, lack of warranty, terms of distribution. -REFERENCES Where to learn more about JPEG. -ARCHIVE LOCATIONS Where to find newer versions of this software. -ACKNOWLEDGMENTS Special thanks. -FILE FORMAT WARS Software *not* to get. -TO DO Plans for future IJG releases. - -Other documentation files in the distribution are: - -User documentation: - install.txt How to configure and install the IJG software. - usage.txt Usage instructions for cjpeg, djpeg, jpegtran, - rdjpgcom, and wrjpgcom. - *.1 Unix-style man pages for programs (same info as usage.txt). - wizard.txt Advanced usage instructions for JPEG wizards only. - change.log Version-to-version change highlights. -Programmer and internal documentation: - libjpeg.txt How to use the JPEG library in your own programs. - example.c Sample code for calling the JPEG library. - structure.txt Overview of the JPEG library's internal structure. - filelist.txt Road map of IJG files. - coderules.txt Coding style rules --- please read if you contribute code. - -Please read at least the files install.txt and usage.txt. Some information -can also be found in the JPEG FAQ (Frequently Asked Questions) article. See -ARCHIVE LOCATIONS below to find out where to obtain the FAQ article. - -If you want to understand how the JPEG code works, we suggest reading one or -more of the REFERENCES, then looking at the documentation files (in roughly -the order listed) before diving into the code. - - -OVERVIEW -======== - -This package contains C software to implement JPEG image encoding, decoding, -and transcoding. JPEG (pronounced "jay-peg") is a standardized compression -method for full-color and gray-scale images. - -This software implements JPEG baseline, extended-sequential, and progressive -compression processes. Provision is made for supporting all variants of these -processes, although some uncommon parameter settings aren't implemented yet. -We have made no provision for supporting the hierarchical or lossless -processes defined in the standard. - -We provide a set of library routines for reading and writing JPEG image files, -plus two sample applications "cjpeg" and "djpeg", which use the library to -perform conversion between JPEG and some other popular image file formats. -The library is intended to be reused in other applications. - -In order to support file conversion and viewing software, we have included -considerable functionality beyond the bare JPEG coding/decoding capability; -for example, the color quantization modules are not strictly part of JPEG -decoding, but they are essential for output to colormapped file formats or -colormapped displays. These extra functions can be compiled out of the -library if not required for a particular application. - -We have also included "jpegtran", a utility for lossless transcoding between -different JPEG processes, and "rdjpgcom" and "wrjpgcom", two simple -applications for inserting and extracting textual comments in JFIF files. - -The emphasis in designing this software has been on achieving portability and -flexibility, while also making it fast enough to be useful. In particular, -the software is not intended to be read as a tutorial on JPEG. (See the -REFERENCES section for introductory material.) Rather, it is intended to -be reliable, portable, industrial-strength code. We do not claim to have -achieved that goal in every aspect of the software, but we strive for it. - -We welcome the use of this software as a component of commercial products. -No royalty is required, but we do ask for an acknowledgement in product -documentation, as described under LEGAL ISSUES. - - -LEGAL ISSUES -============ - -In plain English: - -1. We don't promise that this software works. (But if you find any bugs, - please let us know!) -2. You can use this software for whatever you want. You don't have to pay us. -3. You may not pretend that you wrote this software. If you use it in a - program, you must acknowledge somewhere in your documentation that - you've used the IJG code. - -In legalese: - -The authors make NO WARRANTY or representation, either express or implied, -with respect to this software, its quality, accuracy, merchantability, or -fitness for a particular purpose. This software is provided "AS IS", and you, -its user, assume the entire risk as to its quality and accuracy. - -This software is copyright (C) 1991-2012, Thomas G. Lane, Guido Vollbeding. -All Rights Reserved except as specified below. - -Permission is hereby granted to use, copy, modify, and distribute this -software (or portions thereof) for any purpose, without fee, subject to these -conditions: -(1) If any part of the source code for this software is distributed, then this -README file must be included, with this copyright and no-warranty notice -unaltered; and any additions, deletions, or changes to the original files -must be clearly indicated in accompanying documentation. -(2) If only executable code is distributed, then the accompanying -documentation must state that "this software is based in part on the work of -the Independent JPEG Group". -(3) Permission for use of this software is granted only if the user accepts -full responsibility for any undesirable consequences; the authors accept -NO LIABILITY for damages of any kind. - -These conditions apply to any software derived from or based on the IJG code, -not just to the unmodified library. If you use our work, you ought to -acknowledge us. - -Permission is NOT granted for the use of any IJG author's name or company name -in advertising or publicity relating to this software or products derived from -it. This software may be referred to only as "the Independent JPEG Group's -software". - -We specifically permit and encourage the use of this software as the basis of -commercial products, provided that all warranty or liability claims are -assumed by the product vendor. - - -ansi2knr.c is included in this distribution by permission of L. Peter Deutsch, -sole proprietor of its copyright holder, Aladdin Enterprises of Menlo Park, CA. -ansi2knr.c is NOT covered by the above copyright and conditions, but instead -by the usual distribution terms of the Free Software Foundation; principally, -that you must include source code if you redistribute it. (See the file -ansi2knr.c for full details.) However, since ansi2knr.c is not needed as part -of any program generated from the IJG code, this does not limit you more than -the foregoing paragraphs do. - -The Unix configuration script "configure" was produced with GNU Autoconf. -It is copyright by the Free Software Foundation but is freely distributable. -The same holds for its supporting scripts (config.guess, config.sub, -ltmain.sh). Another support script, install-sh, is copyright by X Consortium -but is also freely distributable. - -The IJG distribution formerly included code to read and write GIF files. -To avoid entanglement with the Unisys LZW patent, GIF reading support has -been removed altogether, and the GIF writer has been simplified to produce -"uncompressed GIFs". This technique does not use the LZW algorithm; the -resulting GIF files are larger than usual, but are readable by all standard -GIF decoders. - -We are required to state that - "The Graphics Interchange Format(c) is the Copyright property of - CompuServe Incorporated. GIF(sm) is a Service Mark property of - CompuServe Incorporated." - - -REFERENCES -========== - -We recommend reading one or more of these references before trying to -understand the innards of the JPEG software. - -The best short technical introduction to the JPEG compression algorithm is - Wallace, Gregory K. "The JPEG Still Picture Compression Standard", - Communications of the ACM, April 1991 (vol. 34 no. 4), pp. 30-44. -(Adjacent articles in that issue discuss MPEG motion picture compression, -applications of JPEG, and related topics.) If you don't have the CACM issue -handy, a PostScript file containing a revised version of Wallace's article is -available at http://www.ijg.org/files/wallace.ps.gz. The file (actually -a preprint for an article that appeared in IEEE Trans. Consumer Electronics) -omits the sample images that appeared in CACM, but it includes corrections -and some added material. Note: the Wallace article is copyright ACM and IEEE, -and it may not be used for commercial purposes. - -A somewhat less technical, more leisurely introduction to JPEG can be found in -"The Data Compression Book" by Mark Nelson and Jean-loup Gailly, published by -M&T Books (New York), 2nd ed. 1996, ISBN 1-55851-434-1. This book provides -good explanations and example C code for a multitude of compression methods -including JPEG. It is an excellent source if you are comfortable reading C -code but don't know much about data compression in general. The book's JPEG -sample code is far from industrial-strength, but when you are ready to look -at a full implementation, you've got one here... - -The best currently available description of JPEG is the textbook "JPEG Still -Image Data Compression Standard" by William B. Pennebaker and Joan L. -Mitchell, published by Van Nostrand Reinhold, 1993, ISBN 0-442-01272-1. -Price US$59.95, 638 pp. The book includes the complete text of the ISO JPEG -standards (DIS 10918-1 and draft DIS 10918-2). -Although this is by far the most detailed and comprehensive exposition of -JPEG publicly available, we point out that it is still missing an explanation -of the most essential properties and algorithms of the underlying DCT -technology. -If you think that you know about DCT-based JPEG after reading this book, -then you are in delusion. The real fundamentals and corresponding potential -of DCT-based JPEG are not publicly known so far, and that is the reason for -all the mistaken developments taking place in the image coding domain. - -The original JPEG standard is divided into two parts, Part 1 being the actual -specification, while Part 2 covers compliance testing methods. Part 1 is -titled "Digital Compression and Coding of Continuous-tone Still Images, -Part 1: Requirements and guidelines" and has document numbers ISO/IEC IS -10918-1, ITU-T T.81. Part 2 is titled "Digital Compression and Coding of -Continuous-tone Still Images, Part 2: Compliance testing" and has document -numbers ISO/IEC IS 10918-2, ITU-T T.83. -IJG JPEG 8 introduces an implementation of the JPEG SmartScale extension -which is specified in two documents: A contributed document at ITU and ISO -with title "ITU-T JPEG-Plus Proposal for Extending ITU-T T.81 for Advanced -Image Coding", April 2006, Geneva, Switzerland. The latest version of this -document is Revision 3. And a contributed document ISO/IEC JTC1/SC29/WG1 N -5799 with title "Evolution of JPEG", June/July 2011, Berlin, Germany. - -The JPEG standard does not specify all details of an interchangeable file -format. For the omitted details we follow the "JFIF" conventions, revision -1.02. JFIF 1.02 has been adopted as an Ecma International Technical Report -and thus received a formal publication status. It is available as a free -download in PDF format from -http://www.ecma-international.org/publications/techreports/E-TR-098.htm. -A PostScript version of the JFIF document is available at -http://www.ijg.org/files/jfif.ps.gz. There is also a plain text version at -http://www.ijg.org/files/jfif.txt.gz, but it is missing the figures. - -The TIFF 6.0 file format specification can be obtained by FTP from -ftp://ftp.sgi.com/graphics/tiff/TIFF6.ps.gz. The JPEG incorporation scheme -found in the TIFF 6.0 spec of 3-June-92 has a number of serious problems. -IJG does not recommend use of the TIFF 6.0 design (TIFF Compression tag 6). -Instead, we recommend the JPEG design proposed by TIFF Technical Note #2 -(Compression tag 7). Copies of this Note can be obtained from -http://www.ijg.org/files/. It is expected that the next revision -of the TIFF spec will replace the 6.0 JPEG design with the Note's design. -Although IJG's own code does not support TIFF/JPEG, the free libtiff library -uses our library to implement TIFF/JPEG per the Note. - - -ARCHIVE LOCATIONS -================= - -The "official" archive site for this software is www.ijg.org. -The most recent released version can always be found there in -directory "files". This particular version will be archived as -http://www.ijg.org/files/jpegsrc.v8d.tar.gz, and in Windows-compatible -"zip" archive format as http://www.ijg.org/files/jpegsr8d.zip. - -The JPEG FAQ (Frequently Asked Questions) article is a source of some -general information about JPEG. -It is available on the World Wide Web at http://www.faqs.org/faqs/jpeg-faq/ -and other news.answers archive sites, including the official news.answers -archive at rtfm.mit.edu: ftp://rtfm.mit.edu/pub/usenet/news.answers/jpeg-faq/. -If you don't have Web or FTP access, send e-mail to mail-server@rtfm.mit.edu -with body - send usenet/news.answers/jpeg-faq/part1 - send usenet/news.answers/jpeg-faq/part2 - - -ACKNOWLEDGMENTS -=============== - -Thank to Juergen Bruder for providing me with a copy of the common DCT -algorithm article, only to find out that I had come to the same result -in a more direct and comprehensible way with a more generative approach. - -Thank to Istvan Sebestyen and Joan L. Mitchell for inviting me to the -ITU JPEG (Study Group 16) meeting in Geneva, Switzerland. - -Thank to Thomas Wiegand and Gary Sullivan for inviting me to the -Joint Video Team (MPEG & ITU) meeting in Geneva, Switzerland. - -Thank to Thomas Richter and Daniel Lee for inviting me to the -ISO/IEC JTC1/SC29/WG1 (also known as JPEG, together with ITU-T SG16) -meeting in Berlin, Germany. - -Thank to John Korejwa and Massimo Ballerini for inviting me to -fruitful consultations in Boston, MA and Milan, Italy. - -Thank to Hendrik Elstner, Roland Fassauer, Simone Zuck, Guenther -Maier-Gerber, Walter Stoeber, Fred Schmitz, and Norbert Braunagel -for corresponding business development. - -Thank to Nico Zschach and Dirk Stelling of the technical support team -at the Digital Images company in Halle for providing me with extra -equipment for configuration tests. - -Thank to Richard F. Lyon (then of Foveon Inc.) for fruitful -communication about JPEG configuration in Sigma Photo Pro software. - -Thank to Andrew Finkenstadt for hosting the ijg.org site. - -Last but not least special thank to Thomas G. Lane for the original -design and development of this singular software package. - - -FILE FORMAT WARS -================ - -The ISO/IEC JTC1/SC29/WG1 standards committee (also known as JPEG, together -with ITU-T SG16) currently promotes different formats containing the name -"JPEG" which is misleading because these formats are incompatible with -original DCT-based JPEG and are based on faulty technologies. -IJG therefore does not and will not support such momentary mistakes -(see REFERENCES). -There exist also distributions under the name "OpenJPEG" promoting such -kind of formats which is misleading because they don't support original -JPEG images. -We have no sympathy for the promotion of inferior formats. Indeed, one of -the original reasons for developing this free software was to help force -convergence on common, interoperable format standards for JPEG files. -Don't use an incompatible file format! -(In any case, our decoder will remain capable of reading existing JPEG -image files indefinitely.) - -Furthermore, the ISO committee pretends to be "responsible for the popular -JPEG" in their public reports which is not true because they don't respond to -actual requirements for the maintenance of the original JPEG specification. - -There are currently distributions in circulation containing the name -"libjpeg" which claim to be a "derivative" or "fork" of the original -libjpeg, but don't have the features and are incompatible with formats -supported by actual IJG libjpeg distributions. Furthermore, they -violate the license conditions as described under LEGAL ISSUES above. -We have no sympathy for the release of misleading and illegal -distributions derived from obsolete code bases. -Don't use an obsolete code base! - - -TO DO -===== - -Version 8 is the first release of a new generation JPEG standard -to overcome the limitations of the original JPEG specification. -More features are being prepared for coming releases... - -Please send bug reports, offers of help, etc. to jpeg-info@jpegclub.org. diff --git a/jpeg/aclocal.m4 b/jpeg/aclocal.m4 deleted file mode 100755 index 9b38b97..0000000 --- a/jpeg/aclocal.m4 +++ /dev/null @@ -1,9652 +0,0 @@ -# generated automatically by aclocal 1.11.2 -*- Autoconf -*- - -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, -# 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software Foundation, -# Inc. -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -m4_ifndef([AC_AUTOCONF_VERSION], - [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl -m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.68],, -[m4_warning([this file was generated for autoconf 2.68. -You have another version of autoconf. It may work, but is not guaranteed to. -If you have problems, you may need to regenerate the build system entirely. -To do so, use the procedure documented by the package, typically `autoreconf'.])]) - -# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- -# -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, -# 2006, 2007, 2008, 2009, 2010, 2011 Free Software -# Foundation, Inc. -# Written by Gordon Matzigkeit, 1996 -# -# This file is free software; the Free Software Foundation gives -# unlimited permission to copy and/or distribute it, with or without -# modifications, as long as this notice is preserved. - -m4_define([_LT_COPYING], [dnl -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, -# 2006, 2007, 2008, 2009, 2010, 2011 Free Software -# Foundation, Inc. -# Written by Gordon Matzigkeit, 1996 -# -# This file is part of GNU Libtool. -# -# GNU Libtool is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# As a special exception to the GNU General Public License, -# if you distribute this file as part of a program or library that -# is built using GNU Libtool, you may include this file under the -# same distribution terms that you use for the rest of that program. -# -# GNU Libtool is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with GNU Libtool; see the file COPYING. If not, a copy -# can be downloaded from http://www.gnu.org/licenses/gpl.html, or -# obtained by writing to the Free Software Foundation, Inc., -# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. -]) - -# serial 57 LT_INIT - - -# LT_PREREQ(VERSION) -# ------------------ -# Complain and exit if this libtool version is less that VERSION. -m4_defun([LT_PREREQ], -[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1, - [m4_default([$3], - [m4_fatal([Libtool version $1 or higher is required], - 63)])], - [$2])]) - - -# _LT_CHECK_BUILDDIR -# ------------------ -# Complain if the absolute build directory name contains unusual characters -m4_defun([_LT_CHECK_BUILDDIR], -[case `pwd` in - *\ * | *\ *) - AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;; -esac -]) - - -# LT_INIT([OPTIONS]) -# ------------------ -AC_DEFUN([LT_INIT], -[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT -AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl -AC_BEFORE([$0], [LT_LANG])dnl -AC_BEFORE([$0], [LT_OUTPUT])dnl -AC_BEFORE([$0], [LTDL_INIT])dnl -m4_require([_LT_CHECK_BUILDDIR])dnl - -dnl Autoconf doesn't catch unexpanded LT_ macros by default: -m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl -m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl -dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4 -dnl unless we require an AC_DEFUNed macro: -AC_REQUIRE([LTOPTIONS_VERSION])dnl -AC_REQUIRE([LTSUGAR_VERSION])dnl -AC_REQUIRE([LTVERSION_VERSION])dnl -AC_REQUIRE([LTOBSOLETE_VERSION])dnl -m4_require([_LT_PROG_LTMAIN])dnl - -_LT_SHELL_INIT([SHELL=${CONFIG_SHELL-/bin/sh}]) - -dnl Parse OPTIONS -_LT_SET_OPTIONS([$0], [$1]) - -# This can be used to rebuild libtool when needed -LIBTOOL_DEPS="$ltmain" - -# Always use our own libtool. -LIBTOOL='$(SHELL) $(top_builddir)/libtool' -AC_SUBST(LIBTOOL)dnl - -_LT_SETUP - -# Only expand once: -m4_define([LT_INIT]) -])# LT_INIT - -# Old names: -AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT]) -AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_PROG_LIBTOOL], []) -dnl AC_DEFUN([AM_PROG_LIBTOOL], []) - - -# _LT_CC_BASENAME(CC) -# ------------------- -# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. -m4_defun([_LT_CC_BASENAME], -[for cc_temp in $1""; do - case $cc_temp in - compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;; - distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;; - \-*) ;; - *) break;; - esac -done -cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` -]) - - -# _LT_FILEUTILS_DEFAULTS -# ---------------------- -# It is okay to use these file commands and assume they have been set -# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'. -m4_defun([_LT_FILEUTILS_DEFAULTS], -[: ${CP="cp -f"} -: ${MV="mv -f"} -: ${RM="rm -f"} -])# _LT_FILEUTILS_DEFAULTS - - -# _LT_SETUP -# --------- -m4_defun([_LT_SETUP], -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -AC_REQUIRE([AC_CANONICAL_BUILD])dnl -AC_REQUIRE([_LT_PREPARE_SED_QUOTE_VARS])dnl -AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl - -_LT_DECL([], [PATH_SEPARATOR], [1], [The PATH separator for the build system])dnl -dnl -_LT_DECL([], [host_alias], [0], [The host system])dnl -_LT_DECL([], [host], [0])dnl -_LT_DECL([], [host_os], [0])dnl -dnl -_LT_DECL([], [build_alias], [0], [The build system])dnl -_LT_DECL([], [build], [0])dnl -_LT_DECL([], [build_os], [0])dnl -dnl -AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([LT_PATH_LD])dnl -AC_REQUIRE([LT_PATH_NM])dnl -dnl -AC_REQUIRE([AC_PROG_LN_S])dnl -test -z "$LN_S" && LN_S="ln -s" -_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl -dnl -AC_REQUIRE([LT_CMD_MAX_LEN])dnl -_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl -_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl -dnl -m4_require([_LT_FILEUTILS_DEFAULTS])dnl -m4_require([_LT_CHECK_SHELL_FEATURES])dnl -m4_require([_LT_PATH_CONVERSION_FUNCTIONS])dnl -m4_require([_LT_CMD_RELOAD])dnl -m4_require([_LT_CHECK_MAGIC_METHOD])dnl -m4_require([_LT_CHECK_SHAREDLIB_FROM_LINKLIB])dnl -m4_require([_LT_CMD_OLD_ARCHIVE])dnl -m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl -m4_require([_LT_WITH_SYSROOT])dnl - -_LT_CONFIG_LIBTOOL_INIT([ -# See if we are running on zsh, and set the options which allow our -# commands through without removal of \ escapes INIT. -if test -n "\${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST -fi -]) -if test -n "${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST -fi - -_LT_CHECK_OBJDIR - -m4_require([_LT_TAG_COMPILER])dnl - -case $host_os in -aix3*) - # AIX sometimes has problems with the GCC collect2 program. For some - # reason, if we set the COLLECT_NAMES environment variable, the problems - # vanish in a puff of smoke. - if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES - fi - ;; -esac - -# Global variables: -ofile=libtool -can_build_shared=yes - -# All known linkers require a `.a' archive for static linking (except MSVC, -# which needs '.lib'). -libext=a - -with_gnu_ld="$lt_cv_prog_gnu_ld" - -old_CC="$CC" -old_CFLAGS="$CFLAGS" - -# Set sane defaults for various variables -test -z "$CC" && CC=cc -test -z "$LTCC" && LTCC=$CC -test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS -test -z "$LD" && LD=ld -test -z "$ac_objext" && ac_objext=o - -_LT_CC_BASENAME([$compiler]) - -# Only perform the check for file, if the check method requires it -test -z "$MAGIC_CMD" && MAGIC_CMD=file -case $deplibs_check_method in -file_magic*) - if test "$file_magic_cmd" = '$MAGIC_CMD'; then - _LT_PATH_MAGIC - fi - ;; -esac - -# Use C for the default configuration in the libtool script -LT_SUPPORTED_TAG([CC]) -_LT_LANG_C_CONFIG -_LT_LANG_DEFAULT_CONFIG -_LT_CONFIG_COMMANDS -])# _LT_SETUP - - -# _LT_PREPARE_SED_QUOTE_VARS -# -------------------------- -# Define a few sed substitution that help us do robust quoting. -m4_defun([_LT_PREPARE_SED_QUOTE_VARS], -[# Backslashify metacharacters that are still active within -# double-quoted strings. -sed_quote_subst='s/\([["`$\\]]\)/\\\1/g' - -# Same as above, but do not quote variable references. -double_quote_subst='s/\([["`\\]]\)/\\\1/g' - -# Sed substitution to delay expansion of an escaped shell variable in a -# double_quote_subst'ed string. -delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' - -# Sed substitution to delay expansion of an escaped single quote. -delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' - -# Sed substitution to avoid accidental globbing in evaled expressions -no_glob_subst='s/\*/\\\*/g' -]) - -# _LT_PROG_LTMAIN -# --------------- -# Note that this code is called both from `configure', and `config.status' -# now that we use AC_CONFIG_COMMANDS to generate libtool. Notably, -# `config.status' has no value for ac_aux_dir unless we are using Automake, -# so we pass a copy along to make sure it has a sensible value anyway. -m4_defun([_LT_PROG_LTMAIN], -[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl -_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir']) -ltmain="$ac_aux_dir/ltmain.sh" -])# _LT_PROG_LTMAIN - - - -# So that we can recreate a full libtool script including additional -# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS -# in macros and then make a single call at the end using the `libtool' -# label. - - -# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS]) -# ---------------------------------------- -# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later. -m4_define([_LT_CONFIG_LIBTOOL_INIT], -[m4_ifval([$1], - [m4_append([_LT_OUTPUT_LIBTOOL_INIT], - [$1 -])])]) - -# Initialize. -m4_define([_LT_OUTPUT_LIBTOOL_INIT]) - - -# _LT_CONFIG_LIBTOOL([COMMANDS]) -# ------------------------------ -# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later. -m4_define([_LT_CONFIG_LIBTOOL], -[m4_ifval([$1], - [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS], - [$1 -])])]) - -# Initialize. -m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS]) - - -# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS]) -# ----------------------------------------------------- -m4_defun([_LT_CONFIG_SAVE_COMMANDS], -[_LT_CONFIG_LIBTOOL([$1]) -_LT_CONFIG_LIBTOOL_INIT([$2]) -]) - - -# _LT_FORMAT_COMMENT([COMMENT]) -# ----------------------------- -# Add leading comment marks to the start of each line, and a trailing -# full-stop to the whole comment if one is not present already. -m4_define([_LT_FORMAT_COMMENT], -[m4_ifval([$1], [ -m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])], - [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.]) -)]) - - - - - -# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?]) -# ------------------------------------------------------------------- -# CONFIGNAME is the name given to the value in the libtool script. -# VARNAME is the (base) name used in the configure script. -# VALUE may be 0, 1 or 2 for a computed quote escaped value based on -# VARNAME. Any other value will be used directly. -m4_define([_LT_DECL], -[lt_if_append_uniq([lt_decl_varnames], [$2], [, ], - [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name], - [m4_ifval([$1], [$1], [$2])]) - lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3]) - m4_ifval([$4], - [lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])]) - lt_dict_add_subkey([lt_decl_dict], [$2], - [tagged?], [m4_ifval([$5], [yes], [no])])]) -]) - - -# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION]) -# -------------------------------------------------------- -m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])]) - - -# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...]) -# ------------------------------------------------ -m4_define([lt_decl_tag_varnames], -[_lt_decl_filter([tagged?], [yes], $@)]) - - -# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..]) -# --------------------------------------------------------- -m4_define([_lt_decl_filter], -[m4_case([$#], - [0], [m4_fatal([$0: too few arguments: $#])], - [1], [m4_fatal([$0: too few arguments: $#: $1])], - [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)], - [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)], - [lt_dict_filter([lt_decl_dict], $@)])[]dnl -]) - - -# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...]) -# -------------------------------------------------- -m4_define([lt_decl_quote_varnames], -[_lt_decl_filter([value], [1], $@)]) - - -# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...]) -# --------------------------------------------------- -m4_define([lt_decl_dquote_varnames], -[_lt_decl_filter([value], [2], $@)]) - - -# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...]) -# --------------------------------------------------- -m4_define([lt_decl_varnames_tagged], -[m4_assert([$# <= 2])dnl -_$0(m4_quote(m4_default([$1], [[, ]])), - m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]), - m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))]) -m4_define([_lt_decl_varnames_tagged], -[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])]) - - -# lt_decl_all_varnames([SEPARATOR], [VARNAME1...]) -# ------------------------------------------------ -m4_define([lt_decl_all_varnames], -[_$0(m4_quote(m4_default([$1], [[, ]])), - m4_if([$2], [], - m4_quote(lt_decl_varnames), - m4_quote(m4_shift($@))))[]dnl -]) -m4_define([_lt_decl_all_varnames], -[lt_join($@, lt_decl_varnames_tagged([$1], - lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl -]) - - -# _LT_CONFIG_STATUS_DECLARE([VARNAME]) -# ------------------------------------ -# Quote a variable value, and forward it to `config.status' so that its -# declaration there will have the same value as in `configure'. VARNAME -# must have a single quote delimited value for this to work. -m4_define([_LT_CONFIG_STATUS_DECLARE], -[$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`']) - - -# _LT_CONFIG_STATUS_DECLARATIONS -# ------------------------------ -# We delimit libtool config variables with single quotes, so when -# we write them to config.status, we have to be sure to quote all -# embedded single quotes properly. In configure, this macro expands -# each variable declared with _LT_DECL (and _LT_TAGDECL) into: -# -# ='`$ECHO "$" | $SED "$delay_single_quote_subst"`' -m4_defun([_LT_CONFIG_STATUS_DECLARATIONS], -[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames), - [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])]) - - -# _LT_LIBTOOL_TAGS -# ---------------- -# Output comment and list of tags supported by the script -m4_defun([_LT_LIBTOOL_TAGS], -[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl -available_tags="_LT_TAGS"dnl -]) - - -# _LT_LIBTOOL_DECLARE(VARNAME, [TAG]) -# ----------------------------------- -# Extract the dictionary values for VARNAME (optionally with TAG) and -# expand to a commented shell variable setting: -# -# # Some comment about what VAR is for. -# visible_name=$lt_internal_name -m4_define([_LT_LIBTOOL_DECLARE], -[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], - [description])))[]dnl -m4_pushdef([_libtool_name], - m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl -m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])), - [0], [_libtool_name=[$]$1], - [1], [_libtool_name=$lt_[]$1], - [2], [_libtool_name=$lt_[]$1], - [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl -m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl -]) - - -# _LT_LIBTOOL_CONFIG_VARS -# ----------------------- -# Produce commented declarations of non-tagged libtool config variables -# suitable for insertion in the LIBTOOL CONFIG section of the `libtool' -# script. Tagged libtool config variables (even for the LIBTOOL CONFIG -# section) are produced by _LT_LIBTOOL_TAG_VARS. -m4_defun([_LT_LIBTOOL_CONFIG_VARS], -[m4_foreach([_lt_var], - m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)), - [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])]) - - -# _LT_LIBTOOL_TAG_VARS(TAG) -# ------------------------- -m4_define([_LT_LIBTOOL_TAG_VARS], -[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames), - [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])]) - - -# _LT_TAGVAR(VARNAME, [TAGNAME]) -# ------------------------------ -m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])]) - - -# _LT_CONFIG_COMMANDS -# ------------------- -# Send accumulated output to $CONFIG_STATUS. Thanks to the lists of -# variables for single and double quote escaping we saved from calls -# to _LT_DECL, we can put quote escaped variables declarations -# into `config.status', and then the shell code to quote escape them in -# for loops in `config.status'. Finally, any additional code accumulated -# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded. -m4_defun([_LT_CONFIG_COMMANDS], -[AC_PROVIDE_IFELSE([LT_OUTPUT], - dnl If the libtool generation code has been placed in $CONFIG_LT, - dnl instead of duplicating it all over again into config.status, - dnl then we will have config.status run $CONFIG_LT later, so it - dnl needs to know what name is stored there: - [AC_CONFIG_COMMANDS([libtool], - [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])], - dnl If the libtool generation code is destined for config.status, - dnl expand the accumulated commands and init code now: - [AC_CONFIG_COMMANDS([libtool], - [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])]) -])#_LT_CONFIG_COMMANDS - - -# Initialize. -m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT], -[ - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -sed_quote_subst='$sed_quote_subst' -double_quote_subst='$double_quote_subst' -delay_variable_subst='$delay_variable_subst' -_LT_CONFIG_STATUS_DECLARATIONS -LTCC='$LTCC' -LTCFLAGS='$LTCFLAGS' -compiler='$compiler_DEFAULT' - -# A function that is used when there is no print builtin or printf. -func_fallback_echo () -{ - eval 'cat <<_LTECHO_EOF -\$[]1 -_LTECHO_EOF' -} - -# Quote evaled strings. -for var in lt_decl_all_varnames([[ \ -]], lt_decl_quote_varnames); do - case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in - *[[\\\\\\\`\\"\\\$]]*) - eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" - ;; - *) - eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" - ;; - esac -done - -# Double-quote double-evaled strings. -for var in lt_decl_all_varnames([[ \ -]], lt_decl_dquote_varnames); do - case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in - *[[\\\\\\\`\\"\\\$]]*) - eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" - ;; - *) - eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" - ;; - esac -done - -_LT_OUTPUT_LIBTOOL_INIT -]) - -# _LT_GENERATED_FILE_INIT(FILE, [COMMENT]) -# ------------------------------------ -# Generate a child script FILE with all initialization necessary to -# reuse the environment learned by the parent script, and make the -# file executable. If COMMENT is supplied, it is inserted after the -# `#!' sequence but before initialization text begins. After this -# macro, additional text can be appended to FILE to form the body of -# the child script. The macro ends with non-zero status if the -# file could not be fully written (such as if the disk is full). -m4_ifdef([AS_INIT_GENERATED], -[m4_defun([_LT_GENERATED_FILE_INIT],[AS_INIT_GENERATED($@)])], -[m4_defun([_LT_GENERATED_FILE_INIT], -[m4_require([AS_PREPARE])]dnl -[m4_pushdef([AS_MESSAGE_LOG_FD])]dnl -[lt_write_fail=0 -cat >$1 <<_ASEOF || lt_write_fail=1 -#! $SHELL -# Generated by $as_me. -$2 -SHELL=\${CONFIG_SHELL-$SHELL} -export SHELL -_ASEOF -cat >>$1 <<\_ASEOF || lt_write_fail=1 -AS_SHELL_SANITIZE -_AS_PREPARE -exec AS_MESSAGE_FD>&1 -_ASEOF -test $lt_write_fail = 0 && chmod +x $1[]dnl -m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT - -# LT_OUTPUT -# --------- -# This macro allows early generation of the libtool script (before -# AC_OUTPUT is called), incase it is used in configure for compilation -# tests. -AC_DEFUN([LT_OUTPUT], -[: ${CONFIG_LT=./config.lt} -AC_MSG_NOTICE([creating $CONFIG_LT]) -_LT_GENERATED_FILE_INIT(["$CONFIG_LT"], -[# Run this file to recreate a libtool stub with the current configuration.]) - -cat >>"$CONFIG_LT" <<\_LTEOF -lt_cl_silent=false -exec AS_MESSAGE_LOG_FD>>config.log -{ - echo - AS_BOX([Running $as_me.]) -} >&AS_MESSAGE_LOG_FD - -lt_cl_help="\ -\`$as_me' creates a local libtool stub from the current configuration, -for use in further configure time tests before the real libtool is -generated. - -Usage: $[0] [[OPTIONS]] - - -h, --help print this help, then exit - -V, --version print version number, then exit - -q, --quiet do not print progress messages - -d, --debug don't remove temporary files - -Report bugs to ." - -lt_cl_version="\ -m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl -m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION]) -configured by $[0], generated by m4_PACKAGE_STRING. - -Copyright (C) 2011 Free Software Foundation, Inc. -This config.lt script is free software; the Free Software Foundation -gives unlimited permision to copy, distribute and modify it." - -while test $[#] != 0 -do - case $[1] in - --version | --v* | -V ) - echo "$lt_cl_version"; exit 0 ;; - --help | --h* | -h ) - echo "$lt_cl_help"; exit 0 ;; - --debug | --d* | -d ) - debug=: ;; - --quiet | --q* | --silent | --s* | -q ) - lt_cl_silent=: ;; - - -*) AC_MSG_ERROR([unrecognized option: $[1] -Try \`$[0] --help' for more information.]) ;; - - *) AC_MSG_ERROR([unrecognized argument: $[1] -Try \`$[0] --help' for more information.]) ;; - esac - shift -done - -if $lt_cl_silent; then - exec AS_MESSAGE_FD>/dev/null -fi -_LTEOF - -cat >>"$CONFIG_LT" <<_LTEOF -_LT_OUTPUT_LIBTOOL_COMMANDS_INIT -_LTEOF - -cat >>"$CONFIG_LT" <<\_LTEOF -AC_MSG_NOTICE([creating $ofile]) -_LT_OUTPUT_LIBTOOL_COMMANDS -AS_EXIT(0) -_LTEOF -chmod +x "$CONFIG_LT" - -# configure is writing to config.log, but config.lt does its own redirection, -# appending to config.log, which fails on DOS, as config.log is still kept -# open by configure. Here we exec the FD to /dev/null, effectively closing -# config.log, so it can be properly (re)opened and appended to by config.lt. -lt_cl_success=: -test "$silent" = yes && - lt_config_lt_args="$lt_config_lt_args --quiet" -exec AS_MESSAGE_LOG_FD>/dev/null -$SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false -exec AS_MESSAGE_LOG_FD>>config.log -$lt_cl_success || AS_EXIT(1) -])# LT_OUTPUT - - -# _LT_CONFIG(TAG) -# --------------- -# If TAG is the built-in tag, create an initial libtool script with a -# default configuration from the untagged config vars. Otherwise add code -# to config.status for appending the configuration named by TAG from the -# matching tagged config vars. -m4_defun([_LT_CONFIG], -[m4_require([_LT_FILEUTILS_DEFAULTS])dnl -_LT_CONFIG_SAVE_COMMANDS([ - m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl - m4_if(_LT_TAG, [C], [ - # See if we are running on zsh, and set the options which allow our - # commands through without removal of \ escapes. - if test -n "${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST - fi - - cfgfile="${ofile}T" - trap "$RM \"$cfgfile\"; exit 1" 1 2 15 - $RM "$cfgfile" - - cat <<_LT_EOF >> "$cfgfile" -#! $SHELL - -# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. -# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION -# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: -# NOTE: Changes made to this file will be lost: look at ltmain.sh. -# -_LT_COPYING -_LT_LIBTOOL_TAGS - -# ### BEGIN LIBTOOL CONFIG -_LT_LIBTOOL_CONFIG_VARS -_LT_LIBTOOL_TAG_VARS -# ### END LIBTOOL CONFIG - -_LT_EOF - - case $host_os in - aix3*) - cat <<\_LT_EOF >> "$cfgfile" -# AIX sometimes has problems with the GCC collect2 program. For some -# reason, if we set the COLLECT_NAMES environment variable, the problems -# vanish in a puff of smoke. -if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES -fi -_LT_EOF - ;; - esac - - _LT_PROG_LTMAIN - - # We use sed instead of cat because bash on DJGPP gets confused if - # if finds mixed CR/LF and LF-only lines. Since sed operates in - # text mode, it properly converts lines to CR/LF. This bash problem - # is reportedly fixed, but why not run on old versions too? - sed '$q' "$ltmain" >> "$cfgfile" \ - || (rm -f "$cfgfile"; exit 1) - - _LT_PROG_REPLACE_SHELLFNS - - mv -f "$cfgfile" "$ofile" || - (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") - chmod +x "$ofile" -], -[cat <<_LT_EOF >> "$ofile" - -dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded -dnl in a comment (ie after a #). -# ### BEGIN LIBTOOL TAG CONFIG: $1 -_LT_LIBTOOL_TAG_VARS(_LT_TAG) -# ### END LIBTOOL TAG CONFIG: $1 -_LT_EOF -])dnl /m4_if -], -[m4_if([$1], [], [ - PACKAGE='$PACKAGE' - VERSION='$VERSION' - TIMESTAMP='$TIMESTAMP' - RM='$RM' - ofile='$ofile'], []) -])dnl /_LT_CONFIG_SAVE_COMMANDS -])# _LT_CONFIG - - -# LT_SUPPORTED_TAG(TAG) -# --------------------- -# Trace this macro to discover what tags are supported by the libtool -# --tag option, using: -# autoconf --trace 'LT_SUPPORTED_TAG:$1' -AC_DEFUN([LT_SUPPORTED_TAG], []) - - -# C support is built-in for now -m4_define([_LT_LANG_C_enabled], []) -m4_define([_LT_TAGS], []) - - -# LT_LANG(LANG) -# ------------- -# Enable libtool support for the given language if not already enabled. -AC_DEFUN([LT_LANG], -[AC_BEFORE([$0], [LT_OUTPUT])dnl -m4_case([$1], - [C], [_LT_LANG(C)], - [C++], [_LT_LANG(CXX)], - [Go], [_LT_LANG(GO)], - [Java], [_LT_LANG(GCJ)], - [Fortran 77], [_LT_LANG(F77)], - [Fortran], [_LT_LANG(FC)], - [Windows Resource], [_LT_LANG(RC)], - [m4_ifdef([_LT_LANG_]$1[_CONFIG], - [_LT_LANG($1)], - [m4_fatal([$0: unsupported language: "$1"])])])dnl -])# LT_LANG - - -# _LT_LANG(LANGNAME) -# ------------------ -m4_defun([_LT_LANG], -[m4_ifdef([_LT_LANG_]$1[_enabled], [], - [LT_SUPPORTED_TAG([$1])dnl - m4_append([_LT_TAGS], [$1 ])dnl - m4_define([_LT_LANG_]$1[_enabled], [])dnl - _LT_LANG_$1_CONFIG($1)])dnl -])# _LT_LANG - - -m4_ifndef([AC_PROG_GO], [ -# NOTE: This macro has been submitted for inclusion into # -# GNU Autoconf as AC_PROG_GO. When it is available in # -# a released version of Autoconf we should remove this # -# macro and use it instead. # -m4_defun([AC_PROG_GO], -[AC_LANG_PUSH(Go)dnl -AC_ARG_VAR([GOC], [Go compiler command])dnl -AC_ARG_VAR([GOFLAGS], [Go compiler flags])dnl -_AC_ARG_VAR_LDFLAGS()dnl -AC_CHECK_TOOL(GOC, gccgo) -if test -z "$GOC"; then - if test -n "$ac_tool_prefix"; then - AC_CHECK_PROG(GOC, [${ac_tool_prefix}gccgo], [${ac_tool_prefix}gccgo]) - fi -fi -if test -z "$GOC"; then - AC_CHECK_PROG(GOC, gccgo, gccgo, false) -fi -])#m4_defun -])#m4_ifndef - - -# _LT_LANG_DEFAULT_CONFIG -# ----------------------- -m4_defun([_LT_LANG_DEFAULT_CONFIG], -[AC_PROVIDE_IFELSE([AC_PROG_CXX], - [LT_LANG(CXX)], - [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])]) - -AC_PROVIDE_IFELSE([AC_PROG_F77], - [LT_LANG(F77)], - [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])]) - -AC_PROVIDE_IFELSE([AC_PROG_FC], - [LT_LANG(FC)], - [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])]) - -dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal -dnl pulling things in needlessly. -AC_PROVIDE_IFELSE([AC_PROG_GCJ], - [LT_LANG(GCJ)], - [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], - [LT_LANG(GCJ)], - [AC_PROVIDE_IFELSE([LT_PROG_GCJ], - [LT_LANG(GCJ)], - [m4_ifdef([AC_PROG_GCJ], - [m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])]) - m4_ifdef([A][M_PROG_GCJ], - [m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])]) - m4_ifdef([LT_PROG_GCJ], - [m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])]) - -AC_PROVIDE_IFELSE([AC_PROG_GO], - [LT_LANG(GO)], - [m4_define([AC_PROG_GO], defn([AC_PROG_GO])[LT_LANG(GO)])]) - -AC_PROVIDE_IFELSE([LT_PROG_RC], - [LT_LANG(RC)], - [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])]) -])# _LT_LANG_DEFAULT_CONFIG - -# Obsolete macros: -AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)]) -AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)]) -AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)]) -AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)]) -AU_DEFUN([AC_LIBTOOL_RC], [LT_LANG(Windows Resource)]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_LIBTOOL_CXX], []) -dnl AC_DEFUN([AC_LIBTOOL_F77], []) -dnl AC_DEFUN([AC_LIBTOOL_FC], []) -dnl AC_DEFUN([AC_LIBTOOL_GCJ], []) -dnl AC_DEFUN([AC_LIBTOOL_RC], []) - - -# _LT_TAG_COMPILER -# ---------------- -m4_defun([_LT_TAG_COMPILER], -[AC_REQUIRE([AC_PROG_CC])dnl - -_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl -_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl -_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl -_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl - -# If no C compiler was specified, use CC. -LTCC=${LTCC-"$CC"} - -# If no C compiler flags were specified, use CFLAGS. -LTCFLAGS=${LTCFLAGS-"$CFLAGS"} - -# Allow CC to be a program name with arguments. -compiler=$CC -])# _LT_TAG_COMPILER - - -# _LT_COMPILER_BOILERPLATE -# ------------------------ -# Check for compiler boilerplate output or warnings with -# the simple compiler test code. -m4_defun([_LT_COMPILER_BOILERPLATE], -[m4_require([_LT_DECL_SED])dnl -ac_outfile=conftest.$ac_objext -echo "$lt_simple_compile_test_code" >conftest.$ac_ext -eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_compiler_boilerplate=`cat conftest.err` -$RM conftest* -])# _LT_COMPILER_BOILERPLATE - - -# _LT_LINKER_BOILERPLATE -# ---------------------- -# Check for linker boilerplate output or warnings with -# the simple link test code. -m4_defun([_LT_LINKER_BOILERPLATE], -[m4_require([_LT_DECL_SED])dnl -ac_outfile=conftest.$ac_objext -echo "$lt_simple_link_test_code" >conftest.$ac_ext -eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_linker_boilerplate=`cat conftest.err` -$RM -r conftest* -])# _LT_LINKER_BOILERPLATE - -# _LT_REQUIRED_DARWIN_CHECKS -# ------------------------- -m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[ - case $host_os in - rhapsody* | darwin*) - AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:]) - AC_CHECK_TOOL([NMEDIT], [nmedit], [:]) - AC_CHECK_TOOL([LIPO], [lipo], [:]) - AC_CHECK_TOOL([OTOOL], [otool], [:]) - AC_CHECK_TOOL([OTOOL64], [otool64], [:]) - _LT_DECL([], [DSYMUTIL], [1], - [Tool to manipulate archived DWARF debug symbol files on Mac OS X]) - _LT_DECL([], [NMEDIT], [1], - [Tool to change global to local symbols on Mac OS X]) - _LT_DECL([], [LIPO], [1], - [Tool to manipulate fat objects and archives on Mac OS X]) - _LT_DECL([], [OTOOL], [1], - [ldd/readelf like tool for Mach-O binaries on Mac OS X]) - _LT_DECL([], [OTOOL64], [1], - [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4]) - - AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod], - [lt_cv_apple_cc_single_mod=no - if test -z "${LT_MULTI_MODULE}"; then - # By default we will add the -single_module flag. You can override - # by either setting the environment variable LT_MULTI_MODULE - # non-empty at configure time, or by adding -multi_module to the - # link flags. - rm -rf libconftest.dylib* - echo "int foo(void){return 1;}" > conftest.c - echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ --dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD - $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ - -dynamiclib -Wl,-single_module conftest.c 2>conftest.err - _lt_result=$? - # If there is a non-empty error log, and "single_module" - # appears in it, assume the flag caused a linker warning - if test -s conftest.err && $GREP single_module conftest.err; then - cat conftest.err >&AS_MESSAGE_LOG_FD - # Otherwise, if the output was created with a 0 exit code from - # the compiler, it worked. - elif test -f libconftest.dylib && test $_lt_result -eq 0; then - lt_cv_apple_cc_single_mod=yes - else - cat conftest.err >&AS_MESSAGE_LOG_FD - fi - rm -rf libconftest.dylib* - rm -f conftest.* - fi]) - - AC_CACHE_CHECK([for -exported_symbols_list linker flag], - [lt_cv_ld_exported_symbols_list], - [lt_cv_ld_exported_symbols_list=no - save_LDFLAGS=$LDFLAGS - echo "_main" > conftest.sym - LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" - AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], - [lt_cv_ld_exported_symbols_list=yes], - [lt_cv_ld_exported_symbols_list=no]) - LDFLAGS="$save_LDFLAGS" - ]) - - AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load], - [lt_cv_ld_force_load=no - cat > conftest.c << _LT_EOF -int forced_loaded() { return 2;} -_LT_EOF - echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&AS_MESSAGE_LOG_FD - $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD - echo "$AR cru libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD - $AR cru libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD - echo "$RANLIB libconftest.a" >&AS_MESSAGE_LOG_FD - $RANLIB libconftest.a 2>&AS_MESSAGE_LOG_FD - cat > conftest.c << _LT_EOF -int main() { return 0;} -_LT_EOF - echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&AS_MESSAGE_LOG_FD - $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err - _lt_result=$? - if test -s conftest.err && $GREP force_load conftest.err; then - cat conftest.err >&AS_MESSAGE_LOG_FD - elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then - lt_cv_ld_force_load=yes - else - cat conftest.err >&AS_MESSAGE_LOG_FD - fi - rm -f conftest.err libconftest.a conftest conftest.c - rm -rf conftest.dSYM - ]) - case $host_os in - rhapsody* | darwin1.[[012]]) - _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; - darwin1.*) - _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; - darwin*) # darwin 5.x on - # if running on 10.5 or later, the deployment target defaults - # to the OS version, if on x86, and 10.4, the deployment - # target defaults to 10.4. Don't you love it? - case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in - 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*) - _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; - 10.[[012]]*) - _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; - 10.*) - _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; - esac - ;; - esac - if test "$lt_cv_apple_cc_single_mod" = "yes"; then - _lt_dar_single_mod='$single_module' - fi - if test "$lt_cv_ld_exported_symbols_list" = "yes"; then - _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' - else - _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' - fi - if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then - _lt_dsymutil='~$DSYMUTIL $lib || :' - else - _lt_dsymutil= - fi - ;; - esac -]) - - -# _LT_DARWIN_LINKER_FEATURES([TAG]) -# --------------------------------- -# Checks for linker and compiler features on darwin -m4_defun([_LT_DARWIN_LINKER_FEATURES], -[ - m4_require([_LT_REQUIRED_DARWIN_CHECKS]) - _LT_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_TAGVAR(hardcode_direct, $1)=no - _LT_TAGVAR(hardcode_automatic, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported - if test "$lt_cv_ld_force_load" = "yes"; then - _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' - m4_case([$1], [F77], [_LT_TAGVAR(compiler_needs_object, $1)=yes], - [FC], [_LT_TAGVAR(compiler_needs_object, $1)=yes]) - else - _LT_TAGVAR(whole_archive_flag_spec, $1)='' - fi - _LT_TAGVAR(link_all_deplibs, $1)=yes - _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined" - case $cc_basename in - ifort*) _lt_dar_can_shared=yes ;; - *) _lt_dar_can_shared=$GCC ;; - esac - if test "$_lt_dar_can_shared" = "yes"; then - output_verbose_link_cmd=func_echo_all - _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" - _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" - _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" - _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" - m4_if([$1], [CXX], -[ if test "$lt_cv_apple_cc_single_mod" != "yes"; then - _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}" - _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}" - fi -],[]) - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi -]) - -# _LT_SYS_MODULE_PATH_AIX([TAGNAME]) -# ---------------------------------- -# Links a minimal program and checks the executable -# for the system default hardcoded library path. In most cases, -# this is /usr/lib:/lib, but when the MPI compilers are used -# the location of the communication and MPI libs are included too. -# If we don't find anything, use the default library path according -# to the aix ld manual. -# Store the results from the different compilers for each TAGNAME. -# Allow to override them for all tags through lt_cv_aix_libpath. -m4_defun([_LT_SYS_MODULE_PATH_AIX], -[m4_require([_LT_DECL_SED])dnl -if test "${lt_cv_aix_libpath+set}" = set; then - aix_libpath=$lt_cv_aix_libpath -else - AC_CACHE_VAL([_LT_TAGVAR([lt_cv_aix_libpath_], [$1])], - [AC_LINK_IFELSE([AC_LANG_PROGRAM],[ - lt_aix_libpath_sed='[ - /Import File Strings/,/^$/ { - /^0/ { - s/^0 *\([^ ]*\) *$/\1/ - p - } - }]' - _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - # Check for a 64-bit object if we didn't find anything. - if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then - _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - fi],[]) - if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then - _LT_TAGVAR([lt_cv_aix_libpath_], [$1])="/usr/lib:/lib" - fi - ]) - aix_libpath=$_LT_TAGVAR([lt_cv_aix_libpath_], [$1]) -fi -])# _LT_SYS_MODULE_PATH_AIX - - -# _LT_SHELL_INIT(ARG) -# ------------------- -m4_define([_LT_SHELL_INIT], -[m4_divert_text([M4SH-INIT], [$1 -])])# _LT_SHELL_INIT - - - -# _LT_PROG_ECHO_BACKSLASH -# ----------------------- -# Find how we can fake an echo command that does not interpret backslash. -# In particular, with Autoconf 2.60 or later we add some code to the start -# of the generated configure script which will find a shell with a builtin -# printf (which we can use as an echo command). -m4_defun([_LT_PROG_ECHO_BACKSLASH], -[ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO -ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO - -AC_MSG_CHECKING([how to print strings]) -# Test print first, because it will be a builtin if present. -if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \ - test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then - ECHO='print -r --' -elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then - ECHO='printf %s\n' -else - # Use this function as a fallback that always works. - func_fallback_echo () - { - eval 'cat <<_LTECHO_EOF -$[]1 -_LTECHO_EOF' - } - ECHO='func_fallback_echo' -fi - -# func_echo_all arg... -# Invoke $ECHO with all args, space-separated. -func_echo_all () -{ - $ECHO "$*" -} - -case "$ECHO" in - printf*) AC_MSG_RESULT([printf]) ;; - print*) AC_MSG_RESULT([print -r]) ;; - *) AC_MSG_RESULT([cat]) ;; -esac - -m4_ifdef([_AS_DETECT_SUGGESTED], -[_AS_DETECT_SUGGESTED([ - test -n "${ZSH_VERSION+set}${BASH_VERSION+set}" || ( - ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' - ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO - ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO - PATH=/empty FPATH=/empty; export PATH FPATH - test "X`printf %s $ECHO`" = "X$ECHO" \ - || test "X`print -r -- $ECHO`" = "X$ECHO" )])]) - -_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts]) -_LT_DECL([], [ECHO], [1], [An echo program that protects backslashes]) -])# _LT_PROG_ECHO_BACKSLASH - - -# _LT_WITH_SYSROOT -# ---------------- -AC_DEFUN([_LT_WITH_SYSROOT], -[AC_MSG_CHECKING([for sysroot]) -AC_ARG_WITH([sysroot], -[ --with-sysroot[=DIR] Search for dependent libraries within DIR - (or the compiler's sysroot if not specified).], -[], [with_sysroot=no]) - -dnl lt_sysroot will always be passed unquoted. We quote it here -dnl in case the user passed a directory name. -lt_sysroot= -case ${with_sysroot} in #( - yes) - if test "$GCC" = yes; then - lt_sysroot=`$CC --print-sysroot 2>/dev/null` - fi - ;; #( - /*) - lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"` - ;; #( - no|'') - ;; #( - *) - AC_MSG_RESULT([${with_sysroot}]) - AC_MSG_ERROR([The sysroot must be an absolute path.]) - ;; -esac - - AC_MSG_RESULT([${lt_sysroot:-no}]) -_LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl -[dependent libraries, and in which our libraries should be installed.])]) - -# _LT_ENABLE_LOCK -# --------------- -m4_defun([_LT_ENABLE_LOCK], -[AC_ARG_ENABLE([libtool-lock], - [AS_HELP_STRING([--disable-libtool-lock], - [avoid locking (might break parallel builds)])]) -test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes - -# Some flags need to be propagated to the compiler or linker for good -# libtool support. -case $host in -ia64-*-hpux*) - # Find out which ABI we are using. - echo 'int i;' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - case `/usr/bin/file conftest.$ac_objext` in - *ELF-32*) - HPUX_IA64_MODE="32" - ;; - *ELF-64*) - HPUX_IA64_MODE="64" - ;; - esac - fi - rm -rf conftest* - ;; -*-*-irix6*) - # Find out which ABI we are using. - echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - if test "$lt_cv_prog_gnu_ld" = yes; then - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -melf32bsmip" - ;; - *N32*) - LD="${LD-ld} -melf32bmipn32" - ;; - *64-bit*) - LD="${LD-ld} -melf64bmip" - ;; - esac - else - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -32" - ;; - *N32*) - LD="${LD-ld} -n32" - ;; - *64-bit*) - LD="${LD-ld} -64" - ;; - esac - fi - fi - rm -rf conftest* - ;; - -x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ -s390*-*linux*|s390*-*tpf*|sparc*-*linux*) - # Find out which ABI we are using. - echo 'int i;' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - case `/usr/bin/file conftest.o` in - *32-bit*) - case $host in - x86_64-*kfreebsd*-gnu) - LD="${LD-ld} -m elf_i386_fbsd" - ;; - x86_64-*linux*) - LD="${LD-ld} -m elf_i386" - ;; - ppc64-*linux*|powerpc64-*linux*) - LD="${LD-ld} -m elf32ppclinux" - ;; - s390x-*linux*) - LD="${LD-ld} -m elf_s390" - ;; - sparc64-*linux*) - LD="${LD-ld} -m elf32_sparc" - ;; - esac - ;; - *64-bit*) - case $host in - x86_64-*kfreebsd*-gnu) - LD="${LD-ld} -m elf_x86_64_fbsd" - ;; - x86_64-*linux*) - LD="${LD-ld} -m elf_x86_64" - ;; - ppc*-*linux*|powerpc*-*linux*) - LD="${LD-ld} -m elf64ppc" - ;; - s390*-*linux*|s390*-*tpf*) - LD="${LD-ld} -m elf64_s390" - ;; - sparc*-*linux*) - LD="${LD-ld} -m elf64_sparc" - ;; - esac - ;; - esac - fi - rm -rf conftest* - ;; - -*-*-sco3.2v5*) - # On SCO OpenServer 5, we need -belf to get full-featured binaries. - SAVE_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -belf" - AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, - [AC_LANG_PUSH(C) - AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) - AC_LANG_POP]) - if test x"$lt_cv_cc_needs_belf" != x"yes"; then - # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf - CFLAGS="$SAVE_CFLAGS" - fi - ;; -*-*solaris*) - # Find out which ABI we are using. - echo 'int i;' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - case `/usr/bin/file conftest.o` in - *64-bit*) - case $lt_cv_prog_gnu_ld in - yes*) - case $host in - i?86-*-solaris*) - LD="${LD-ld} -m elf_x86_64" - ;; - sparc*-*-solaris*) - LD="${LD-ld} -m elf64_sparc" - ;; - esac - # GNU ld 2.21 introduced _sol2 emulations. Use them if available. - if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then - LD="${LD-ld}_sol2" - fi - ;; - *) - if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then - LD="${LD-ld} -64" - fi - ;; - esac - ;; - esac - fi - rm -rf conftest* - ;; -esac - -need_locks="$enable_libtool_lock" -])# _LT_ENABLE_LOCK - - -# _LT_PROG_AR -# ----------- -m4_defun([_LT_PROG_AR], -[AC_CHECK_TOOLS(AR, [ar], false) -: ${AR=ar} -: ${AR_FLAGS=cru} -_LT_DECL([], [AR], [1], [The archiver]) -_LT_DECL([], [AR_FLAGS], [1], [Flags to create an archive]) - -AC_CACHE_CHECK([for archiver @FILE support], [lt_cv_ar_at_file], - [lt_cv_ar_at_file=no - AC_COMPILE_IFELSE([AC_LANG_PROGRAM], - [echo conftest.$ac_objext > conftest.lst - lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD' - AC_TRY_EVAL([lt_ar_try]) - if test "$ac_status" -eq 0; then - # Ensure the archiver fails upon bogus file names. - rm -f conftest.$ac_objext libconftest.a - AC_TRY_EVAL([lt_ar_try]) - if test "$ac_status" -ne 0; then - lt_cv_ar_at_file=@ - fi - fi - rm -f conftest.* libconftest.a - ]) - ]) - -if test "x$lt_cv_ar_at_file" = xno; then - archiver_list_spec= -else - archiver_list_spec=$lt_cv_ar_at_file -fi -_LT_DECL([], [archiver_list_spec], [1], - [How to feed a file listing to the archiver]) -])# _LT_PROG_AR - - -# _LT_CMD_OLD_ARCHIVE -# ------------------- -m4_defun([_LT_CMD_OLD_ARCHIVE], -[_LT_PROG_AR - -AC_CHECK_TOOL(STRIP, strip, :) -test -z "$STRIP" && STRIP=: -_LT_DECL([], [STRIP], [1], [A symbol stripping program]) - -AC_CHECK_TOOL(RANLIB, ranlib, :) -test -z "$RANLIB" && RANLIB=: -_LT_DECL([], [RANLIB], [1], - [Commands used to install an old-style archive]) - -# Determine commands to create old-style static archives. -old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' -old_postinstall_cmds='chmod 644 $oldlib' -old_postuninstall_cmds= - -if test -n "$RANLIB"; then - case $host_os in - openbsd*) - old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib" - ;; - *) - old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib" - ;; - esac - old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib" -fi - -case $host_os in - darwin*) - lock_old_archive_extraction=yes ;; - *) - lock_old_archive_extraction=no ;; -esac -_LT_DECL([], [old_postinstall_cmds], [2]) -_LT_DECL([], [old_postuninstall_cmds], [2]) -_LT_TAGDECL([], [old_archive_cmds], [2], - [Commands used to build an old-style archive]) -_LT_DECL([], [lock_old_archive_extraction], [0], - [Whether to use a lock for old archive extraction]) -])# _LT_CMD_OLD_ARCHIVE - - -# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, -# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE]) -# ---------------------------------------------------------------- -# Check whether the given compiler option works -AC_DEFUN([_LT_COMPILER_OPTION], -[m4_require([_LT_FILEUTILS_DEFAULTS])dnl -m4_require([_LT_DECL_SED])dnl -AC_CACHE_CHECK([$1], [$2], - [$2=no - m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="$3" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - # The option is referenced via a variable to avoid confusing sed. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&AS_MESSAGE_LOG_FD - echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings other than the usual output. - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then - $2=yes - fi - fi - $RM conftest* -]) - -if test x"[$]$2" = xyes; then - m4_if([$5], , :, [$5]) -else - m4_if([$6], , :, [$6]) -fi -])# _LT_COMPILER_OPTION - -# Old name: -AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], []) - - -# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, -# [ACTION-SUCCESS], [ACTION-FAILURE]) -# ---------------------------------------------------- -# Check whether the given linker option works -AC_DEFUN([_LT_LINKER_OPTION], -[m4_require([_LT_FILEUTILS_DEFAULTS])dnl -m4_require([_LT_DECL_SED])dnl -AC_CACHE_CHECK([$1], [$2], - [$2=no - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS $3" - echo "$lt_simple_link_test_code" > conftest.$ac_ext - if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then - # The linker can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - # Append any errors to the config.log. - cat conftest.err 1>&AS_MESSAGE_LOG_FD - $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if diff conftest.exp conftest.er2 >/dev/null; then - $2=yes - fi - else - $2=yes - fi - fi - $RM -r conftest* - LDFLAGS="$save_LDFLAGS" -]) - -if test x"[$]$2" = xyes; then - m4_if([$4], , :, [$4]) -else - m4_if([$5], , :, [$5]) -fi -])# _LT_LINKER_OPTION - -# Old name: -AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], []) - - -# LT_CMD_MAX_LEN -#--------------- -AC_DEFUN([LT_CMD_MAX_LEN], -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -# find the maximum length of command line arguments -AC_MSG_CHECKING([the maximum length of command line arguments]) -AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl - i=0 - teststring="ABCD" - - case $build_os in - msdosdjgpp*) - # On DJGPP, this test can blow up pretty badly due to problems in libc - # (any single argument exceeding 2000 bytes causes a buffer overrun - # during glob expansion). Even if it were fixed, the result of this - # check would be larger than it should be. - lt_cv_sys_max_cmd_len=12288; # 12K is about right - ;; - - gnu*) - # Under GNU Hurd, this test is not required because there is - # no limit to the length of command line arguments. - # Libtool will interpret -1 as no limit whatsoever - lt_cv_sys_max_cmd_len=-1; - ;; - - cygwin* | mingw* | cegcc*) - # On Win9x/ME, this test blows up -- it succeeds, but takes - # about 5 minutes as the teststring grows exponentially. - # Worse, since 9x/ME are not pre-emptively multitasking, - # you end up with a "frozen" computer, even though with patience - # the test eventually succeeds (with a max line length of 256k). - # Instead, let's just punt: use the minimum linelength reported by - # all of the supported platforms: 8192 (on NT/2K/XP). - lt_cv_sys_max_cmd_len=8192; - ;; - - mint*) - # On MiNT this can take a long time and run out of memory. - lt_cv_sys_max_cmd_len=8192; - ;; - - amigaos*) - # On AmigaOS with pdksh, this test takes hours, literally. - # So we just punt and use a minimum line length of 8192. - lt_cv_sys_max_cmd_len=8192; - ;; - - netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) - # This has been around since 386BSD, at least. Likely further. - if test -x /sbin/sysctl; then - lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` - elif test -x /usr/sbin/sysctl; then - lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` - else - lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs - fi - # And add a safety zone - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` - ;; - - interix*) - # We know the value 262144 and hardcode it with a safety zone (like BSD) - lt_cv_sys_max_cmd_len=196608 - ;; - - os2*) - # The test takes a long time on OS/2. - lt_cv_sys_max_cmd_len=8192 - ;; - - osf*) - # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure - # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not - # nice to cause kernel panics so lets avoid the loop below. - # First set a reasonable default. - lt_cv_sys_max_cmd_len=16384 - # - if test -x /sbin/sysconfig; then - case `/sbin/sysconfig -q proc exec_disable_arg_limit` in - *1*) lt_cv_sys_max_cmd_len=-1 ;; - esac - fi - ;; - sco3.2v5*) - lt_cv_sys_max_cmd_len=102400 - ;; - sysv5* | sco5v6* | sysv4.2uw2*) - kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` - if test -n "$kargmax"; then - lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'` - else - lt_cv_sys_max_cmd_len=32768 - fi - ;; - *) - lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` - if test -n "$lt_cv_sys_max_cmd_len"; then - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` - else - # Make teststring a little bigger before we do anything with it. - # a 1K string should be a reasonable start. - for i in 1 2 3 4 5 6 7 8 ; do - teststring=$teststring$teststring - done - SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} - # If test is not a shell built-in, we'll probably end up computing a - # maximum length that is only half of the actual maximum length, but - # we can't tell. - while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \ - = "X$teststring$teststring"; } >/dev/null 2>&1 && - test $i != 17 # 1/2 MB should be enough - do - i=`expr $i + 1` - teststring=$teststring$teststring - done - # Only check the string length outside the loop. - lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` - teststring= - # Add a significant safety factor because C++ compilers can tack on - # massive amounts of additional arguments before passing them to the - # linker. It appears as though 1/2 is a usable value. - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` - fi - ;; - esac -]) -if test -n $lt_cv_sys_max_cmd_len ; then - AC_MSG_RESULT($lt_cv_sys_max_cmd_len) -else - AC_MSG_RESULT(none) -fi -max_cmd_len=$lt_cv_sys_max_cmd_len -_LT_DECL([], [max_cmd_len], [0], - [What is the maximum length of a command?]) -])# LT_CMD_MAX_LEN - -# Old name: -AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], []) - - -# _LT_HEADER_DLFCN -# ---------------- -m4_defun([_LT_HEADER_DLFCN], -[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl -])# _LT_HEADER_DLFCN - - -# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, -# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) -# ---------------------------------------------------------------- -m4_defun([_LT_TRY_DLOPEN_SELF], -[m4_require([_LT_HEADER_DLFCN])dnl -if test "$cross_compiling" = yes; then : - [$4] -else - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext <<_LT_EOF -[#line $LINENO "configure" -#include "confdefs.h" - -#if HAVE_DLFCN_H -#include -#endif - -#include - -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif - -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif - -/* When -fvisbility=hidden is used, assume the code has been annotated - correspondingly for the symbols needed. */ -#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) -int fnord () __attribute__((visibility("default"))); -#endif - -int fnord () { return 42; } -int main () -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; - - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else - { - if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - else puts (dlerror ()); - } - /* dlclose (self); */ - } - else - puts (dlerror ()); - - return status; -}] -_LT_EOF - if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) $1 ;; - x$lt_dlneed_uscore) $2 ;; - x$lt_dlunknown|x*) $3 ;; - esac - else : - # compilation failed - $3 - fi -fi -rm -fr conftest* -])# _LT_TRY_DLOPEN_SELF - - -# LT_SYS_DLOPEN_SELF -# ------------------ -AC_DEFUN([LT_SYS_DLOPEN_SELF], -[m4_require([_LT_HEADER_DLFCN])dnl -if test "x$enable_dlopen" != xyes; then - enable_dlopen=unknown - enable_dlopen_self=unknown - enable_dlopen_self_static=unknown -else - lt_cv_dlopen=no - lt_cv_dlopen_libs= - - case $host_os in - beos*) - lt_cv_dlopen="load_add_on" - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - ;; - - mingw* | pw32* | cegcc*) - lt_cv_dlopen="LoadLibrary" - lt_cv_dlopen_libs= - ;; - - cygwin*) - lt_cv_dlopen="dlopen" - lt_cv_dlopen_libs= - ;; - - darwin*) - # if libdl is installed we need to link against it - AC_CHECK_LIB([dl], [dlopen], - [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[ - lt_cv_dlopen="dyld" - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - ]) - ;; - - *) - AC_CHECK_FUNC([shl_load], - [lt_cv_dlopen="shl_load"], - [AC_CHECK_LIB([dld], [shl_load], - [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"], - [AC_CHECK_FUNC([dlopen], - [lt_cv_dlopen="dlopen"], - [AC_CHECK_LIB([dl], [dlopen], - [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], - [AC_CHECK_LIB([svld], [dlopen], - [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], - [AC_CHECK_LIB([dld], [dld_link], - [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"]) - ]) - ]) - ]) - ]) - ]) - ;; - esac - - if test "x$lt_cv_dlopen" != xno; then - enable_dlopen=yes - else - enable_dlopen=no - fi - - case $lt_cv_dlopen in - dlopen) - save_CPPFLAGS="$CPPFLAGS" - test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" - - save_LDFLAGS="$LDFLAGS" - wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" - - save_LIBS="$LIBS" - LIBS="$lt_cv_dlopen_libs $LIBS" - - AC_CACHE_CHECK([whether a program can dlopen itself], - lt_cv_dlopen_self, [dnl - _LT_TRY_DLOPEN_SELF( - lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, - lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) - ]) - - if test "x$lt_cv_dlopen_self" = xyes; then - wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" - AC_CACHE_CHECK([whether a statically linked program can dlopen itself], - lt_cv_dlopen_self_static, [dnl - _LT_TRY_DLOPEN_SELF( - lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, - lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) - ]) - fi - - CPPFLAGS="$save_CPPFLAGS" - LDFLAGS="$save_LDFLAGS" - LIBS="$save_LIBS" - ;; - esac - - case $lt_cv_dlopen_self in - yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; - *) enable_dlopen_self=unknown ;; - esac - - case $lt_cv_dlopen_self_static in - yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; - *) enable_dlopen_self_static=unknown ;; - esac -fi -_LT_DECL([dlopen_support], [enable_dlopen], [0], - [Whether dlopen is supported]) -_LT_DECL([dlopen_self], [enable_dlopen_self], [0], - [Whether dlopen of programs is supported]) -_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0], - [Whether dlopen of statically linked programs is supported]) -])# LT_SYS_DLOPEN_SELF - -# Old name: -AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], []) - - -# _LT_COMPILER_C_O([TAGNAME]) -# --------------------------- -# Check to see if options -c and -o are simultaneously supported by compiler. -# This macro does not hard code the compiler like AC_PROG_CC_C_O. -m4_defun([_LT_COMPILER_C_O], -[m4_require([_LT_DECL_SED])dnl -m4_require([_LT_FILEUTILS_DEFAULTS])dnl -m4_require([_LT_TAG_COMPILER])dnl -AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext], - [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)], - [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no - $RM -r conftest 2>/dev/null - mkdir conftest - cd conftest - mkdir out - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - - lt_compiler_flag="-o out/conftest2.$ac_objext" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD) - (eval "$lt_compile" 2>out/conftest.err) - ac_status=$? - cat out/conftest.err >&AS_MESSAGE_LOG_FD - echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD - if (exit $ac_status) && test -s out/conftest2.$ac_objext - then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp - $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 - if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then - _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes - fi - fi - chmod u+w . 2>&AS_MESSAGE_LOG_FD - $RM conftest* - # SGI C++ compiler will create directory out/ii_files/ for - # template instantiation - test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files - $RM out/* && rmdir out - cd .. - $RM -r conftest - $RM conftest* -]) -_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1], - [Does compiler simultaneously support -c and -o options?]) -])# _LT_COMPILER_C_O - - -# _LT_COMPILER_FILE_LOCKS([TAGNAME]) -# ---------------------------------- -# Check to see if we can do hard links to lock some files if needed -m4_defun([_LT_COMPILER_FILE_LOCKS], -[m4_require([_LT_ENABLE_LOCK])dnl -m4_require([_LT_FILEUTILS_DEFAULTS])dnl -_LT_COMPILER_C_O([$1]) - -hard_links="nottested" -if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then - # do not overwrite the value of need_locks provided by the user - AC_MSG_CHECKING([if we can lock with hard links]) - hard_links=yes - $RM conftest* - ln conftest.a conftest.b 2>/dev/null && hard_links=no - touch conftest.a - ln conftest.a conftest.b 2>&5 || hard_links=no - ln conftest.a conftest.b 2>/dev/null && hard_links=no - AC_MSG_RESULT([$hard_links]) - if test "$hard_links" = no; then - AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe]) - need_locks=warn - fi -else - need_locks=no -fi -_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?]) -])# _LT_COMPILER_FILE_LOCKS - - -# _LT_CHECK_OBJDIR -# ---------------- -m4_defun([_LT_CHECK_OBJDIR], -[AC_CACHE_CHECK([for objdir], [lt_cv_objdir], -[rm -f .libs 2>/dev/null -mkdir .libs 2>/dev/null -if test -d .libs; then - lt_cv_objdir=.libs -else - # MS-DOS does not allow filenames that begin with a dot. - lt_cv_objdir=_libs -fi -rmdir .libs 2>/dev/null]) -objdir=$lt_cv_objdir -_LT_DECL([], [objdir], [0], - [The name of the directory that contains temporary libtool files])dnl -m4_pattern_allow([LT_OBJDIR])dnl -AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/", - [Define to the sub-directory in which libtool stores uninstalled libraries.]) -])# _LT_CHECK_OBJDIR - - -# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME]) -# -------------------------------------- -# Check hardcoding attributes. -m4_defun([_LT_LINKER_HARDCODE_LIBPATH], -[AC_MSG_CHECKING([how to hardcode library paths into programs]) -_LT_TAGVAR(hardcode_action, $1)= -if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" || - test -n "$_LT_TAGVAR(runpath_var, $1)" || - test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then - - # We can hardcode non-existent directories. - if test "$_LT_TAGVAR(hardcode_direct, $1)" != no && - # If the only mechanism to avoid hardcoding is shlibpath_var, we - # have to relink, otherwise we might link with an installed library - # when we should be linking with a yet-to-be-installed one - ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no && - test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then - # Linking always hardcodes the temporary library directory. - _LT_TAGVAR(hardcode_action, $1)=relink - else - # We can link without hardcoding, and we can hardcode nonexisting dirs. - _LT_TAGVAR(hardcode_action, $1)=immediate - fi -else - # We cannot hardcode anything, or else we can only hardcode existing - # directories. - _LT_TAGVAR(hardcode_action, $1)=unsupported -fi -AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)]) - -if test "$_LT_TAGVAR(hardcode_action, $1)" = relink || - test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then - # Fast installation is not supported - enable_fast_install=no -elif test "$shlibpath_overrides_runpath" = yes || - test "$enable_shared" = no; then - # Fast installation is not necessary - enable_fast_install=needless -fi -_LT_TAGDECL([], [hardcode_action], [0], - [How to hardcode a shared library path into an executable]) -])# _LT_LINKER_HARDCODE_LIBPATH - - -# _LT_CMD_STRIPLIB -# ---------------- -m4_defun([_LT_CMD_STRIPLIB], -[m4_require([_LT_DECL_EGREP]) -striplib= -old_striplib= -AC_MSG_CHECKING([whether stripping libraries is possible]) -if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then - test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" - test -z "$striplib" && striplib="$STRIP --strip-unneeded" - AC_MSG_RESULT([yes]) -else -# FIXME - insert some real tests, host_os isn't really good enough - case $host_os in - darwin*) - if test -n "$STRIP" ; then - striplib="$STRIP -x" - old_striplib="$STRIP -S" - AC_MSG_RESULT([yes]) - else - AC_MSG_RESULT([no]) - fi - ;; - *) - AC_MSG_RESULT([no]) - ;; - esac -fi -_LT_DECL([], [old_striplib], [1], [Commands to strip libraries]) -_LT_DECL([], [striplib], [1]) -])# _LT_CMD_STRIPLIB - - -# _LT_SYS_DYNAMIC_LINKER([TAG]) -# ----------------------------- -# PORTME Fill in your ld.so characteristics -m4_defun([_LT_SYS_DYNAMIC_LINKER], -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -m4_require([_LT_DECL_EGREP])dnl -m4_require([_LT_FILEUTILS_DEFAULTS])dnl -m4_require([_LT_DECL_OBJDUMP])dnl -m4_require([_LT_DECL_SED])dnl -m4_require([_LT_CHECK_SHELL_FEATURES])dnl -AC_MSG_CHECKING([dynamic linker characteristics]) -m4_if([$1], - [], [ -if test "$GCC" = yes; then - case $host_os in - darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; - *) lt_awk_arg="/^libraries:/" ;; - esac - case $host_os in - mingw* | cegcc*) lt_sed_strip_eq="s,=\([[A-Za-z]]:\),\1,g" ;; - *) lt_sed_strip_eq="s,=/,/,g" ;; - esac - lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` - case $lt_search_path_spec in - *\;*) - # if the path contains ";" then we assume it to be the separator - # otherwise default to the standard path separator (i.e. ":") - it is - # assumed that no part of a normal pathname contains ";" but that should - # okay in the real world where ";" in dirpaths is itself problematic. - lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'` - ;; - *) - lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"` - ;; - esac - # Ok, now we have the path, separated by spaces, we can step through it - # and add multilib dir if necessary. - lt_tmp_lt_search_path_spec= - lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` - for lt_sys_path in $lt_search_path_spec; do - if test -d "$lt_sys_path/$lt_multi_os_dir"; then - lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" - else - test -d "$lt_sys_path" && \ - lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" - fi - done - lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk ' -BEGIN {RS=" "; FS="/|\n";} { - lt_foo=""; - lt_count=0; - for (lt_i = NF; lt_i > 0; lt_i--) { - if ($lt_i != "" && $lt_i != ".") { - if ($lt_i == "..") { - lt_count++; - } else { - if (lt_count == 0) { - lt_foo="/" $lt_i lt_foo; - } else { - lt_count--; - } - } - } - } - if (lt_foo != "") { lt_freq[[lt_foo]]++; } - if (lt_freq[[lt_foo]] == 1) { print lt_foo; } -}'` - # AWK program above erroneously prepends '/' to C:/dos/paths - # for these hosts. - case $host_os in - mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ - $SED 's,/\([[A-Za-z]]:\),\1,g'` ;; - esac - sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` -else - sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" -fi]) -library_names_spec= -libname_spec='lib$name' -soname_spec= -shrext_cmds=".so" -postinstall_cmds= -postuninstall_cmds= -finish_cmds= -finish_eval= -shlibpath_var= -shlibpath_overrides_runpath=unknown -version_type=none -dynamic_linker="$host_os ld.so" -sys_lib_dlsearch_path_spec="/lib /usr/lib" -need_lib_prefix=unknown -hardcode_into_libs=no - -# when you set need_version to no, make sure it does not cause -set_version -# flags to be left without arguments -need_version=unknown - -case $host_os in -aix3*) - version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' - shlibpath_var=LIBPATH - - # AIX 3 has no versioning support, so we append a major version to the name. - soname_spec='${libname}${release}${shared_ext}$major' - ;; - -aix[[4-9]]*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - hardcode_into_libs=yes - if test "$host_cpu" = ia64; then - # AIX 5 supports IA64 - library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - else - # With GCC up to 2.95.x, collect2 would create an import file - # for dependence libraries. The import file would start with - # the line `#! .'. This would cause the generated library to - # depend on `.', always an invalid library. This was fixed in - # development snapshots of GCC prior to 3.0. - case $host_os in - aix4 | aix4.[[01]] | aix4.[[01]].*) - if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' - echo ' yes ' - echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then - : - else - can_build_shared=no - fi - ;; - esac - # AIX (on Power*) has no versioning support, so currently we can not hardcode correct - # soname into executable. Probably we can add versioning support to - # collect2, so additional links can be useful in future. - if test "$aix_use_runtimelinking" = yes; then - # If using run time linking (on AIX 4.2 or later) use lib.so - # instead of lib.a to let people know that these are not - # typical AIX shared libraries. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - else - # We preserve .a as extension for shared libraries through AIX4.2 - # and later when we are not doing run time linking. - library_names_spec='${libname}${release}.a $libname.a' - soname_spec='${libname}${release}${shared_ext}$major' - fi - shlibpath_var=LIBPATH - fi - ;; - -amigaos*) - case $host_cpu in - powerpc) - # Since July 2007 AmigaOS4 officially supports .so libraries. - # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - ;; - m68k) - library_names_spec='$libname.ixlibrary $libname.a' - # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' - ;; - esac - ;; - -beos*) - library_names_spec='${libname}${shared_ext}' - dynamic_linker="$host_os ld.so" - shlibpath_var=LIBRARY_PATH - ;; - -bsdi[[45]]*) - version_type=linux # correct to gnu/linux during the next big refactor - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" - sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" - # the default ld.so.conf also contains /usr/contrib/lib and - # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow - # libtool to hard-code these into programs - ;; - -cygwin* | mingw* | pw32* | cegcc*) - version_type=windows - shrext_cmds=".dll" - need_version=no - need_lib_prefix=no - - case $GCC,$cc_basename in - yes,*) - # gcc - library_names_spec='$libname.dll.a' - # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \${file}`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname~ - chmod a+x \$dldir/$dlname~ - if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then - eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; - fi' - postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $RM \$dlpath' - shlibpath_overrides_runpath=yes - - case $host_os in - cygwin*) - # Cygwin DLLs use 'cyg' prefix rather than 'lib' - soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' -m4_if([$1], [],[ - sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"]) - ;; - mingw* | cegcc*) - # MinGW DLLs use traditional 'lib' prefix - soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' - ;; - pw32*) - # pw32 DLLs use 'pw' prefix rather than 'lib' - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' - ;; - esac - dynamic_linker='Win32 ld.exe' - ;; - - *,cl*) - # Native MSVC - libname_spec='$name' - soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' - library_names_spec='${libname}.dll.lib' - - case $build_os in - mingw*) - sys_lib_search_path_spec= - lt_save_ifs=$IFS - IFS=';' - for lt_path in $LIB - do - IFS=$lt_save_ifs - # Let DOS variable expansion print the short 8.3 style file name. - lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` - sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" - done - IFS=$lt_save_ifs - # Convert to MSYS style. - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([[a-zA-Z]]\\):| /\\1|g' -e 's|^ ||'` - ;; - cygwin*) - # Convert to unix form, then to dos form, then back to unix form - # but this time dos style (no spaces!) so that the unix form looks - # like /cygdrive/c/PROGRA~1:/cygdr... - sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` - sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` - sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - ;; - *) - sys_lib_search_path_spec="$LIB" - if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then - # It is most probably a Windows format PATH. - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` - else - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - fi - # FIXME: find the short name or the path components, as spaces are - # common. (e.g. "Program Files" -> "PROGRA~1") - ;; - esac - - # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \${file}`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname' - postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $RM \$dlpath' - shlibpath_overrides_runpath=yes - dynamic_linker='Win32 link.exe' - ;; - - *) - # Assume MSVC wrapper - library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib' - dynamic_linker='Win32 ld.exe' - ;; - esac - # FIXME: first we should search . and the directory the executable is in - shlibpath_var=PATH - ;; - -darwin* | rhapsody*) - dynamic_linker="$host_os dyld" - version_type=darwin - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' - soname_spec='${libname}${release}${major}$shared_ext' - shlibpath_overrides_runpath=yes - shlibpath_var=DYLD_LIBRARY_PATH - shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' -m4_if([$1], [],[ - sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"]) - sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' - ;; - -dgux*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -freebsd* | dragonfly*) - # DragonFly does not have aout. When/if they implement a new - # versioning mechanism, adjust this. - if test -x /usr/bin/objformat; then - objformat=`/usr/bin/objformat` - else - case $host_os in - freebsd[[23]].*) objformat=aout ;; - *) objformat=elf ;; - esac - fi - version_type=freebsd-$objformat - case $version_type in - freebsd-elf*) - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' - need_version=no - need_lib_prefix=no - ;; - freebsd-*) - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' - need_version=yes - ;; - esac - shlibpath_var=LD_LIBRARY_PATH - case $host_os in - freebsd2.*) - shlibpath_overrides_runpath=yes - ;; - freebsd3.[[01]]* | freebsdelf3.[[01]]*) - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \ - freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1) - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - *) # from 4.6 on, and DragonFly - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - esac - ;; - -gnu*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - -haiku*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - dynamic_linker="$host_os runtime_loader" - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LIBRARY_PATH - shlibpath_overrides_runpath=yes - sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' - hardcode_into_libs=yes - ;; - -hpux9* | hpux10* | hpux11*) - # Give a soname corresponding to the major version so that dld.sl refuses to - # link against other versions. - version_type=sunos - need_lib_prefix=no - need_version=no - case $host_cpu in - ia64*) - shrext_cmds='.so' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.so" - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - if test "X$HPUX_IA64_MODE" = X32; then - sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" - else - sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" - fi - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - hppa*64*) - shrext_cmds='.sl' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.sl" - shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - *) - shrext_cmds='.sl' - dynamic_linker="$host_os dld.sl" - shlibpath_var=SHLIB_PATH - shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - ;; - esac - # HP-UX runs *really* slowly unless shared libraries are mode 555, ... - postinstall_cmds='chmod 555 $lib' - # or fails outright, so override atomically: - install_override_mode=555 - ;; - -interix[[3-9]]*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - -irix5* | irix6* | nonstopux*) - case $host_os in - nonstopux*) version_type=nonstopux ;; - *) - if test "$lt_cv_prog_gnu_ld" = yes; then - version_type=linux # correct to gnu/linux during the next big refactor - else - version_type=irix - fi ;; - esac - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' - case $host_os in - irix5* | nonstopux*) - libsuff= shlibsuff= - ;; - *) - case $LD in # libtool.m4 will add one of these switches to LD - *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") - libsuff= shlibsuff= libmagic=32-bit;; - *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") - libsuff=32 shlibsuff=N32 libmagic=N32;; - *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") - libsuff=64 shlibsuff=64 libmagic=64-bit;; - *) libsuff= shlibsuff= libmagic=never-match;; - esac - ;; - esac - shlibpath_var=LD_LIBRARY${shlibsuff}_PATH - shlibpath_overrides_runpath=no - sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" - sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" - hardcode_into_libs=yes - ;; - -# No shared lib support for Linux oldld, aout, or coff. -linux*oldld* | linux*aout* | linux*coff*) - dynamic_linker=no - ;; - -# This must be glibc/ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - - # Some binutils ld are patched to set DT_RUNPATH - AC_CACHE_VAL([lt_cv_shlibpath_overrides_runpath], - [lt_cv_shlibpath_overrides_runpath=no - save_LDFLAGS=$LDFLAGS - save_libdir=$libdir - eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \ - LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\"" - AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], - [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null], - [lt_cv_shlibpath_overrides_runpath=yes])]) - LDFLAGS=$save_LDFLAGS - libdir=$save_libdir - ]) - shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath - - # This implies no fast_install, which is unacceptable. - # Some rework will be needed to allow for fast_install - # before this can be enabled. - hardcode_into_libs=yes - - # Append ld.so.conf contents to the search path - if test -f /etc/ld.so.conf; then - lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` - sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" - fi - - # We used to test for /lib/ld.so.1 and disable shared libraries on - # powerpc, because MkLinux only supported shared libraries with the - # GNU dynamic linker. Since this was broken with cross compilers, - # most powerpc-linux boxes support dynamic linking these days and - # people can always --disable-shared, the test was removed, and we - # assume the GNU/Linux dynamic linker is in use. - dynamic_linker='GNU/Linux ld.so' - ;; - -netbsd*) - version_type=sunos - need_lib_prefix=no - need_version=no - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - dynamic_linker='NetBSD (a.out) ld.so' - else - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - dynamic_linker='NetBSD ld.elf_so' - fi - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - -newsos6) - version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; - -*nto* | *qnx*) - version_type=qnx - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - dynamic_linker='ldqnx.so' - ;; - -openbsd*) - version_type=sunos - sys_lib_dlsearch_path_spec="/usr/lib" - need_lib_prefix=no - # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. - case $host_os in - openbsd3.3 | openbsd3.3.*) need_version=yes ;; - *) need_version=no ;; - esac - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - shlibpath_var=LD_LIBRARY_PATH - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - case $host_os in - openbsd2.[[89]] | openbsd2.[[89]].*) - shlibpath_overrides_runpath=no - ;; - *) - shlibpath_overrides_runpath=yes - ;; - esac - else - shlibpath_overrides_runpath=yes - fi - ;; - -os2*) - libname_spec='$name' - shrext_cmds=".dll" - need_lib_prefix=no - library_names_spec='$libname${shared_ext} $libname.a' - dynamic_linker='OS/2 ld.exe' - shlibpath_var=LIBPATH - ;; - -osf3* | osf4* | osf5*) - version_type=osf - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" - sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" - ;; - -rdos*) - dynamic_linker=no - ;; - -solaris*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - # ldd complains unless libraries are executable - postinstall_cmds='chmod +x $lib' - ;; - -sunos4*) - version_type=sunos - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - if test "$with_gnu_ld" = yes; then - need_lib_prefix=no - fi - need_version=yes - ;; - -sysv4 | sysv4.3*) - version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - case $host_vendor in - sni) - shlibpath_overrides_runpath=no - need_lib_prefix=no - runpath_var=LD_RUN_PATH - ;; - siemens) - need_lib_prefix=no - ;; - motorola) - need_lib_prefix=no - need_version=no - shlibpath_overrides_runpath=no - sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' - ;; - esac - ;; - -sysv4*MP*) - if test -d /usr/nec ;then - version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' - soname_spec='$libname${shared_ext}.$major' - shlibpath_var=LD_LIBRARY_PATH - fi - ;; - -sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - version_type=freebsd-elf - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - if test "$with_gnu_ld" = yes; then - sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' - else - sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' - case $host_os in - sco3.2v5*) - sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" - ;; - esac - fi - sys_lib_dlsearch_path_spec='/usr/lib' - ;; - -tpf*) - # TPF is a cross-target only. Preferred cross-host = GNU/Linux. - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - -uts4*) - version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -*) - dynamic_linker=no - ;; -esac -AC_MSG_RESULT([$dynamic_linker]) -test "$dynamic_linker" = no && can_build_shared=no - -variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -if test "$GCC" = yes; then - variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" -fi - -if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then - sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" -fi -if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then - sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" -fi - -_LT_DECL([], [variables_saved_for_relink], [1], - [Variables whose values should be saved in libtool wrapper scripts and - restored at link time]) -_LT_DECL([], [need_lib_prefix], [0], - [Do we need the "lib" prefix for modules?]) -_LT_DECL([], [need_version], [0], [Do we need a version for libraries?]) -_LT_DECL([], [version_type], [0], [Library versioning type]) -_LT_DECL([], [runpath_var], [0], [Shared library runtime path variable]) -_LT_DECL([], [shlibpath_var], [0],[Shared library path variable]) -_LT_DECL([], [shlibpath_overrides_runpath], [0], - [Is shlibpath searched before the hard-coded library search path?]) -_LT_DECL([], [libname_spec], [1], [Format of library name prefix]) -_LT_DECL([], [library_names_spec], [1], - [[List of archive names. First name is the real one, the rest are links. - The last name is the one that the linker finds with -lNAME]]) -_LT_DECL([], [soname_spec], [1], - [[The coded name of the library, if different from the real name]]) -_LT_DECL([], [install_override_mode], [1], - [Permission mode override for installation of shared libraries]) -_LT_DECL([], [postinstall_cmds], [2], - [Command to use after installation of a shared archive]) -_LT_DECL([], [postuninstall_cmds], [2], - [Command to use after uninstallation of a shared archive]) -_LT_DECL([], [finish_cmds], [2], - [Commands used to finish a libtool library installation in a directory]) -_LT_DECL([], [finish_eval], [1], - [[As "finish_cmds", except a single script fragment to be evaled but - not shown]]) -_LT_DECL([], [hardcode_into_libs], [0], - [Whether we should hardcode library paths into libraries]) -_LT_DECL([], [sys_lib_search_path_spec], [2], - [Compile-time system search path for libraries]) -_LT_DECL([], [sys_lib_dlsearch_path_spec], [2], - [Run-time system search path for libraries]) -])# _LT_SYS_DYNAMIC_LINKER - - -# _LT_PATH_TOOL_PREFIX(TOOL) -# -------------------------- -# find a file program which can recognize shared library -AC_DEFUN([_LT_PATH_TOOL_PREFIX], -[m4_require([_LT_DECL_EGREP])dnl -AC_MSG_CHECKING([for $1]) -AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, -[case $MAGIC_CMD in -[[\\/*] | ?:[\\/]*]) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. - ;; -*) - lt_save_MAGIC_CMD="$MAGIC_CMD" - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR -dnl $ac_dummy forces splitting on constant user-supplied paths. -dnl POSIX.2 word splitting is done only on the output of word expansions, -dnl not every word. This closes a longstanding sh security hole. - ac_dummy="m4_if([$2], , $PATH, [$2])" - for ac_dir in $ac_dummy; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$1; then - lt_cv_path_MAGIC_CMD="$ac_dir/$1" - if test -n "$file_magic_test_file"; then - case $deplibs_check_method in - "file_magic "*) - file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` - MAGIC_CMD="$lt_cv_path_MAGIC_CMD" - if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | - $EGREP "$file_magic_regex" > /dev/null; then - : - else - cat <<_LT_EOF 1>&2 - -*** Warning: the command libtool uses to detect shared libraries, -*** $file_magic_cmd, produces output that libtool cannot recognize. -*** The result is that libtool may fail to recognize shared libraries -*** as such. This will affect the creation of libtool libraries that -*** depend on shared libraries, but programs linked with such libtool -*** libraries will work regardless of this problem. Nevertheless, you -*** may want to report the problem to your system manager and/or to -*** bug-libtool@gnu.org - -_LT_EOF - fi ;; - esac - fi - break - fi - done - IFS="$lt_save_ifs" - MAGIC_CMD="$lt_save_MAGIC_CMD" - ;; -esac]) -MAGIC_CMD="$lt_cv_path_MAGIC_CMD" -if test -n "$MAGIC_CMD"; then - AC_MSG_RESULT($MAGIC_CMD) -else - AC_MSG_RESULT(no) -fi -_LT_DECL([], [MAGIC_CMD], [0], - [Used to examine libraries when file_magic_cmd begins with "file"])dnl -])# _LT_PATH_TOOL_PREFIX - -# Old name: -AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], []) - - -# _LT_PATH_MAGIC -# -------------- -# find a file program which can recognize a shared library -m4_defun([_LT_PATH_MAGIC], -[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH) -if test -z "$lt_cv_path_MAGIC_CMD"; then - if test -n "$ac_tool_prefix"; then - _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH) - else - MAGIC_CMD=: - fi -fi -])# _LT_PATH_MAGIC - - -# LT_PATH_LD -# ---------- -# find the pathname to the GNU or non-GNU linker -AC_DEFUN([LT_PATH_LD], -[AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([AC_CANONICAL_HOST])dnl -AC_REQUIRE([AC_CANONICAL_BUILD])dnl -m4_require([_LT_DECL_SED])dnl -m4_require([_LT_DECL_EGREP])dnl -m4_require([_LT_PROG_ECHO_BACKSLASH])dnl - -AC_ARG_WITH([gnu-ld], - [AS_HELP_STRING([--with-gnu-ld], - [assume the C compiler uses GNU ld @<:@default=no@:>@])], - [test "$withval" = no || with_gnu_ld=yes], - [with_gnu_ld=no])dnl - -ac_prog=ld -if test "$GCC" = yes; then - # Check if gcc -print-prog-name=ld gives a path. - AC_MSG_CHECKING([for ld used by $CC]) - case $host in - *-*-mingw*) - # gcc leaves a trailing carriage return which upsets mingw - ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; - *) - ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; - esac - case $ac_prog in - # Accept absolute paths. - [[\\/]]* | ?:[[\\/]]*) - re_direlt='/[[^/]][[^/]]*/\.\./' - # Canonicalize the pathname of ld - ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` - while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do - ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` - done - test -z "$LD" && LD="$ac_prog" - ;; - "") - # If it fails, then pretend we aren't using GCC. - ac_prog=ld - ;; - *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown - ;; - esac -elif test "$with_gnu_ld" = yes; then - AC_MSG_CHECKING([for GNU ld]) -else - AC_MSG_CHECKING([for non-GNU ld]) -fi -AC_CACHE_VAL(lt_cv_path_LD, -[if test -z "$LD"; then - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - lt_cv_path_LD="$ac_dir/$ac_prog" - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some variants of GNU ld only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - case `"$lt_cv_path_LD" -v 2>&1 &1 /dev/null 2>&1; then - lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' - lt_cv_file_magic_cmd='func_win32_libid' - else - # Keep this pattern in sync with the one in func_win32_libid. - lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' - lt_cv_file_magic_cmd='$OBJDUMP -f' - fi - ;; - -cegcc*) - # use the weaker test based on 'objdump'. See mingw*. - lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' - lt_cv_file_magic_cmd='$OBJDUMP -f' - ;; - -darwin* | rhapsody*) - lt_cv_deplibs_check_method=pass_all - ;; - -freebsd* | dragonfly*) - if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then - case $host_cpu in - i*86 ) - # Not sure whether the presence of OpenBSD here was a mistake. - # Let's accept both of them until this is cleared up. - lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` - ;; - esac - else - lt_cv_deplibs_check_method=pass_all - fi - ;; - -gnu*) - lt_cv_deplibs_check_method=pass_all - ;; - -haiku*) - lt_cv_deplibs_check_method=pass_all - ;; - -hpux10.20* | hpux11*) - lt_cv_file_magic_cmd=/usr/bin/file - case $host_cpu in - ia64*) - lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64' - lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so - ;; - hppa*64*) - [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]'] - lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl - ;; - *) - lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]]\.[[0-9]]) shared library' - lt_cv_file_magic_test_file=/usr/lib/libc.sl - ;; - esac - ;; - -interix[[3-9]]*) - # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here - lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$' - ;; - -irix5* | irix6* | nonstopux*) - case $LD in - *-32|*"-32 ") libmagic=32-bit;; - *-n32|*"-n32 ") libmagic=N32;; - *-64|*"-64 ") libmagic=64-bit;; - *) libmagic=never-match;; - esac - lt_cv_deplibs_check_method=pass_all - ;; - -# This must be glibc/ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu) - lt_cv_deplibs_check_method=pass_all - ;; - -netbsd*) - if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then - lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' - else - lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$' - fi - ;; - -newos6*) - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=/usr/lib/libnls.so - ;; - -*nto* | *qnx*) - lt_cv_deplibs_check_method=pass_all - ;; - -openbsd*) - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$' - else - lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' - fi - ;; - -osf3* | osf4* | osf5*) - lt_cv_deplibs_check_method=pass_all - ;; - -rdos*) - lt_cv_deplibs_check_method=pass_all - ;; - -solaris*) - lt_cv_deplibs_check_method=pass_all - ;; - -sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - lt_cv_deplibs_check_method=pass_all - ;; - -sysv4 | sysv4.3*) - case $host_vendor in - motorola) - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` - ;; - ncr) - lt_cv_deplibs_check_method=pass_all - ;; - sequent) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' - ;; - sni) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" - lt_cv_file_magic_test_file=/lib/libc.so - ;; - siemens) - lt_cv_deplibs_check_method=pass_all - ;; - pc) - lt_cv_deplibs_check_method=pass_all - ;; - esac - ;; - -tpf*) - lt_cv_deplibs_check_method=pass_all - ;; -esac -]) - -file_magic_glob= -want_nocaseglob=no -if test "$build" = "$host"; then - case $host_os in - mingw* | pw32*) - if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then - want_nocaseglob=yes - else - file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[[\1]]\/[[\1]]\/g;/g"` - fi - ;; - esac -fi - -file_magic_cmd=$lt_cv_file_magic_cmd -deplibs_check_method=$lt_cv_deplibs_check_method -test -z "$deplibs_check_method" && deplibs_check_method=unknown - -_LT_DECL([], [deplibs_check_method], [1], - [Method to check whether dependent libraries are shared objects]) -_LT_DECL([], [file_magic_cmd], [1], - [Command to use when deplibs_check_method = "file_magic"]) -_LT_DECL([], [file_magic_glob], [1], - [How to find potential files when deplibs_check_method = "file_magic"]) -_LT_DECL([], [want_nocaseglob], [1], - [Find potential files using nocaseglob when deplibs_check_method = "file_magic"]) -])# _LT_CHECK_MAGIC_METHOD - - -# LT_PATH_NM -# ---------- -# find the pathname to a BSD- or MS-compatible name lister -AC_DEFUN([LT_PATH_NM], -[AC_REQUIRE([AC_PROG_CC])dnl -AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM, -[if test -n "$NM"; then - # Let the user override the test. - lt_cv_path_NM="$NM" -else - lt_nm_to_check="${ac_tool_prefix}nm" - if test -n "$ac_tool_prefix" && test "$build" = "$host"; then - lt_nm_to_check="$lt_nm_to_check nm" - fi - for lt_tmp_nm in $lt_nm_to_check; do - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - tmp_nm="$ac_dir/$lt_tmp_nm" - if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then - # Check to see if the nm accepts a BSD-compat flag. - # Adding the `sed 1q' prevents false positives on HP-UX, which says: - # nm: unknown option "B" ignored - # Tru64's nm complains that /dev/null is an invalid object file - case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in - */dev/null* | *'Invalid file or object type'*) - lt_cv_path_NM="$tmp_nm -B" - break - ;; - *) - case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in - */dev/null*) - lt_cv_path_NM="$tmp_nm -p" - break - ;; - *) - lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but - continue # so that we can try to find one that supports BSD flags - ;; - esac - ;; - esac - fi - done - IFS="$lt_save_ifs" - done - : ${lt_cv_path_NM=no} -fi]) -if test "$lt_cv_path_NM" != "no"; then - NM="$lt_cv_path_NM" -else - # Didn't find any BSD compatible name lister, look for dumpbin. - if test -n "$DUMPBIN"; then : - # Let the user override the test. - else - AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :) - case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in - *COFF*) - DUMPBIN="$DUMPBIN -symbols" - ;; - *) - DUMPBIN=: - ;; - esac - fi - AC_SUBST([DUMPBIN]) - if test "$DUMPBIN" != ":"; then - NM="$DUMPBIN" - fi -fi -test -z "$NM" && NM=nm -AC_SUBST([NM]) -_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl - -AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface], - [lt_cv_nm_interface="BSD nm" - echo "int some_variable = 0;" > conftest.$ac_ext - (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&AS_MESSAGE_LOG_FD) - (eval "$ac_compile" 2>conftest.err) - cat conftest.err >&AS_MESSAGE_LOG_FD - (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD) - (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) - cat conftest.err >&AS_MESSAGE_LOG_FD - (eval echo "\"\$as_me:$LINENO: output\"" >&AS_MESSAGE_LOG_FD) - cat conftest.out >&AS_MESSAGE_LOG_FD - if $GREP 'External.*some_variable' conftest.out > /dev/null; then - lt_cv_nm_interface="MS dumpbin" - fi - rm -f conftest*]) -])# LT_PATH_NM - -# Old names: -AU_ALIAS([AM_PROG_NM], [LT_PATH_NM]) -AU_ALIAS([AC_PROG_NM], [LT_PATH_NM]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AM_PROG_NM], []) -dnl AC_DEFUN([AC_PROG_NM], []) - -# _LT_CHECK_SHAREDLIB_FROM_LINKLIB -# -------------------------------- -# how to determine the name of the shared library -# associated with a specific link library. -# -- PORTME fill in with the dynamic library characteristics -m4_defun([_LT_CHECK_SHAREDLIB_FROM_LINKLIB], -[m4_require([_LT_DECL_EGREP]) -m4_require([_LT_DECL_OBJDUMP]) -m4_require([_LT_DECL_DLLTOOL]) -AC_CACHE_CHECK([how to associate runtime and link libraries], -lt_cv_sharedlib_from_linklib_cmd, -[lt_cv_sharedlib_from_linklib_cmd='unknown' - -case $host_os in -cygwin* | mingw* | pw32* | cegcc*) - # two different shell functions defined in ltmain.sh - # decide which to use based on capabilities of $DLLTOOL - case `$DLLTOOL --help 2>&1` in - *--identify-strict*) - lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib - ;; - *) - lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback - ;; - esac - ;; -*) - # fallback: assume linklib IS sharedlib - lt_cv_sharedlib_from_linklib_cmd="$ECHO" - ;; -esac -]) -sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd -test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO - -_LT_DECL([], [sharedlib_from_linklib_cmd], [1], - [Command to associate shared and link libraries]) -])# _LT_CHECK_SHAREDLIB_FROM_LINKLIB - - -# _LT_PATH_MANIFEST_TOOL -# ---------------------- -# locate the manifest tool -m4_defun([_LT_PATH_MANIFEST_TOOL], -[AC_CHECK_TOOL(MANIFEST_TOOL, mt, :) -test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt -AC_CACHE_CHECK([if $MANIFEST_TOOL is a manifest tool], [lt_cv_path_mainfest_tool], - [lt_cv_path_mainfest_tool=no - echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&AS_MESSAGE_LOG_FD - $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out - cat conftest.err >&AS_MESSAGE_LOG_FD - if $GREP 'Manifest Tool' conftest.out > /dev/null; then - lt_cv_path_mainfest_tool=yes - fi - rm -f conftest*]) -if test "x$lt_cv_path_mainfest_tool" != xyes; then - MANIFEST_TOOL=: -fi -_LT_DECL([], [MANIFEST_TOOL], [1], [Manifest tool])dnl -])# _LT_PATH_MANIFEST_TOOL - - -# LT_LIB_M -# -------- -# check for math library -AC_DEFUN([LT_LIB_M], -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -LIBM= -case $host in -*-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*) - # These system don't have libm, or don't need it - ;; -*-ncr-sysv4.3*) - AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") - AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm") - ;; -*) - AC_CHECK_LIB(m, cos, LIBM="-lm") - ;; -esac -AC_SUBST([LIBM]) -])# LT_LIB_M - -# Old name: -AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_CHECK_LIBM], []) - - -# _LT_COMPILER_NO_RTTI([TAGNAME]) -# ------------------------------- -m4_defun([_LT_COMPILER_NO_RTTI], -[m4_require([_LT_TAG_COMPILER])dnl - -_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= - -if test "$GCC" = yes; then - case $cc_basename in - nvcc*) - _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -Xcompiler -fno-builtin' ;; - *) - _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ;; - esac - - _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], - lt_cv_prog_compiler_rtti_exceptions, - [-fno-rtti -fno-exceptions], [], - [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"]) -fi -_LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1], - [Compiler flag to turn off builtin functions]) -])# _LT_COMPILER_NO_RTTI - - -# _LT_CMD_GLOBAL_SYMBOLS -# ---------------------- -m4_defun([_LT_CMD_GLOBAL_SYMBOLS], -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([AC_PROG_AWK])dnl -AC_REQUIRE([LT_PATH_NM])dnl -AC_REQUIRE([LT_PATH_LD])dnl -m4_require([_LT_DECL_SED])dnl -m4_require([_LT_DECL_EGREP])dnl -m4_require([_LT_TAG_COMPILER])dnl - -# Check for command to grab the raw symbol name followed by C symbol from nm. -AC_MSG_CHECKING([command to parse $NM output from $compiler object]) -AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], -[ -# These are sane defaults that work on at least a few old systems. -# [They come from Ultrix. What could be older than Ultrix?!! ;)] - -# Character class describing NM global symbol codes. -symcode='[[BCDEGRST]]' - -# Regexp to match symbols that can be accessed directly from C. -sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' - -# Define system-specific variables. -case $host_os in -aix*) - symcode='[[BCDT]]' - ;; -cygwin* | mingw* | pw32* | cegcc*) - symcode='[[ABCDGISTW]]' - ;; -hpux*) - if test "$host_cpu" = ia64; then - symcode='[[ABCDEGRST]]' - fi - ;; -irix* | nonstopux*) - symcode='[[BCDEGRST]]' - ;; -osf*) - symcode='[[BCDEGQRST]]' - ;; -solaris*) - symcode='[[BDRT]]' - ;; -sco3.2v5*) - symcode='[[DT]]' - ;; -sysv4.2uw2*) - symcode='[[DT]]' - ;; -sysv5* | sco5v6* | unixware* | OpenUNIX*) - symcode='[[ABDT]]' - ;; -sysv4) - symcode='[[DFNSTU]]' - ;; -esac - -# If we're using GNU nm, then use its standard symbol codes. -case `$NM -V 2>&1` in -*GNU* | *'with BFD'*) - symcode='[[ABCDGIRSTW]]' ;; -esac - -# Transform an extracted symbol line into a proper C declaration. -# Some systems (esp. on ia64) link data and code symbols differently, -# so use this general approach. -lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" - -# Transform an extracted symbol line into symbol name and symbol address -lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p'" -lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"lib\2\", (void *) \&\2},/p'" - -# Handle CRLF in mingw tool chain -opt_cr= -case $build_os in -mingw*) - opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp - ;; -esac - -# Try without a prefix underscore, then with it. -for ac_symprfx in "" "_"; do - - # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. - symxfrm="\\1 $ac_symprfx\\2 \\2" - - # Write the raw and C identifiers. - if test "$lt_cv_nm_interface" = "MS dumpbin"; then - # Fake it for dumpbin and say T for any non-static function - # and D for any global variable. - # Also find C++ and __fastcall symbols from MSVC++, - # which start with @ or ?. - lt_cv_sys_global_symbol_pipe="$AWK ['"\ -" {last_section=section; section=\$ 3};"\ -" /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\ -" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ -" \$ 0!~/External *\|/{next};"\ -" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ -" {if(hide[section]) next};"\ -" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ -" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ -" s[1]~/^[@?]/{print s[1], s[1]; next};"\ -" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ -" ' prfx=^$ac_symprfx]" - else - lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" - fi - lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'" - - # Check to see that the pipe works correctly. - pipe_works=no - - rm -f conftest* - cat > conftest.$ac_ext <<_LT_EOF -#ifdef __cplusplus -extern "C" { -#endif -char nm_test_var; -void nm_test_func(void); -void nm_test_func(void){} -#ifdef __cplusplus -} -#endif -int main(){nm_test_var='a';nm_test_func();return(0);} -_LT_EOF - - if AC_TRY_EVAL(ac_compile); then - # Now try to grab the symbols. - nlist=conftest.nm - if AC_TRY_EVAL(NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) && test -s "$nlist"; then - # Try sorting and uniquifying the output. - if sort "$nlist" | uniq > "$nlist"T; then - mv -f "$nlist"T "$nlist" - else - rm -f "$nlist"T - fi - - # Make sure that we snagged all the symbols we need. - if $GREP ' nm_test_var$' "$nlist" >/dev/null; then - if $GREP ' nm_test_func$' "$nlist" >/dev/null; then - cat <<_LT_EOF > conftest.$ac_ext -/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ -#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) -/* DATA imports from DLLs on WIN32 con't be const, because runtime - relocations are performed -- see ld's documentation on pseudo-relocs. */ -# define LT@&t@_DLSYM_CONST -#elif defined(__osf__) -/* This system does not cope well with relocations in const data. */ -# define LT@&t@_DLSYM_CONST -#else -# define LT@&t@_DLSYM_CONST const -#endif - -#ifdef __cplusplus -extern "C" { -#endif - -_LT_EOF - # Now generate the symbol file. - eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' - - cat <<_LT_EOF >> conftest.$ac_ext - -/* The mapping between symbol names and symbols. */ -LT@&t@_DLSYM_CONST struct { - const char *name; - void *address; -} -lt__PROGRAM__LTX_preloaded_symbols[[]] = -{ - { "@PROGRAM@", (void *) 0 }, -_LT_EOF - $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext - cat <<\_LT_EOF >> conftest.$ac_ext - {0, (void *) 0} -}; - -/* This works around a problem in FreeBSD linker */ -#ifdef FREEBSD_WORKAROUND -static const void *lt_preloaded_setup() { - return lt__PROGRAM__LTX_preloaded_symbols; -} -#endif - -#ifdef __cplusplus -} -#endif -_LT_EOF - # Now try linking the two files. - mv conftest.$ac_objext conftstm.$ac_objext - lt_globsym_save_LIBS=$LIBS - lt_globsym_save_CFLAGS=$CFLAGS - LIBS="conftstm.$ac_objext" - CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" - if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then - pipe_works=yes - fi - LIBS=$lt_globsym_save_LIBS - CFLAGS=$lt_globsym_save_CFLAGS - else - echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD - fi - else - echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD - fi - else - echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD - fi - else - echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD - cat conftest.$ac_ext >&5 - fi - rm -rf conftest* conftst* - - # Do not use the global_symbol_pipe unless it works. - if test "$pipe_works" = yes; then - break - else - lt_cv_sys_global_symbol_pipe= - fi -done -]) -if test -z "$lt_cv_sys_global_symbol_pipe"; then - lt_cv_sys_global_symbol_to_cdecl= -fi -if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then - AC_MSG_RESULT(failed) -else - AC_MSG_RESULT(ok) -fi - -# Response file support. -if test "$lt_cv_nm_interface" = "MS dumpbin"; then - nm_file_list_spec='@' -elif $NM --help 2>/dev/null | grep '[[@]]FILE' >/dev/null; then - nm_file_list_spec='@' -fi - -_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1], - [Take the output of nm and produce a listing of raw symbols and C names]) -_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1], - [Transform the output of nm in a proper C declaration]) -_LT_DECL([global_symbol_to_c_name_address], - [lt_cv_sys_global_symbol_to_c_name_address], [1], - [Transform the output of nm in a C name address pair]) -_LT_DECL([global_symbol_to_c_name_address_lib_prefix], - [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1], - [Transform the output of nm in a C name address pair when lib prefix is needed]) -_LT_DECL([], [nm_file_list_spec], [1], - [Specify filename containing input files for $NM]) -]) # _LT_CMD_GLOBAL_SYMBOLS - - -# _LT_COMPILER_PIC([TAGNAME]) -# --------------------------- -m4_defun([_LT_COMPILER_PIC], -[m4_require([_LT_TAG_COMPILER])dnl -_LT_TAGVAR(lt_prog_compiler_wl, $1)= -_LT_TAGVAR(lt_prog_compiler_pic, $1)= -_LT_TAGVAR(lt_prog_compiler_static, $1)= - -m4_if([$1], [CXX], [ - # C++ specific cases for pic, static, wl, etc. - if test "$GXX" = yes; then - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' - - case $host_os in - aix*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - fi - ;; - - amigaos*) - case $host_cpu in - powerpc) - # see comment about AmigaOS4 .so support - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - m68k) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' - ;; - esac - ;; - - beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; - mingw* | cygwin* | os2* | pw32* | cegcc*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - # Although the cygwin gcc ignores -fPIC, still need this for old-style - # (--disable-auto-import) libraries - m4_if([$1], [GCJ], [], - [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) - ;; - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' - ;; - *djgpp*) - # DJGPP does not support shared libraries at all - _LT_TAGVAR(lt_prog_compiler_pic, $1)= - ;; - haiku*) - # PIC is the default for Haiku. - # The "-static" flag exists, but is broken. - _LT_TAGVAR(lt_prog_compiler_static, $1)= - ;; - interix[[3-9]]*) - # Interix 3.x gcc -fpic/-fPIC options generate broken code. - # Instead, we relocate shared libraries at runtime. - ;; - sysv4*MP*) - if test -d /usr/nec; then - _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic - fi - ;; - hpux*) - # PIC is the default for 64-bit PA HP-UX, but not for 32-bit - # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag - # sets the default TLS model and affects inlining. - case $host_cpu in - hppa*64*) - ;; - *) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - esac - ;; - *qnx* | *nto*) - # QNX uses GNU C++, but need to define -shared option too, otherwise - # it will coredump. - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' - ;; - *) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - esac - else - case $host_os in - aix[[4-9]]*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - else - _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' - fi - ;; - chorus*) - case $cc_basename in - cxch68*) - # Green Hills C++ Compiler - # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" - ;; - esac - ;; - mingw* | cygwin* | os2* | pw32* | cegcc*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - m4_if([$1], [GCJ], [], - [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) - ;; - dgux*) - case $cc_basename in - ec++*) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - ;; - ghcx*) - # Green Hills C++ Compiler - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - ;; - *) - ;; - esac - ;; - freebsd* | dragonfly*) - # FreeBSD uses GNU C++ - ;; - hpux9* | hpux10* | hpux11*) - case $cc_basename in - CC*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' - if test "$host_cpu" != ia64; then - _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' - fi - ;; - aCC*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' - case $host_cpu in - hppa*64*|ia64*) - # +Z the default - ;; - *) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' - ;; - esac - ;; - *) - ;; - esac - ;; - interix*) - # This is c89, which is MS Visual C++ (no shared libs) - # Anyone wants to do a port? - ;; - irix5* | irix6* | nonstopux*) - case $cc_basename in - CC*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - # CC pic flag -KPIC is the default. - ;; - *) - ;; - esac - ;; - linux* | k*bsd*-gnu | kopensolaris*-gnu) - case $cc_basename in - KCC*) - # KAI C++ Compiler - _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - ecpc* ) - # old Intel C++ for x86_64 which still supported -KPIC. - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' - ;; - icpc* ) - # Intel C++, used to be incompatible with GCC. - # ICC 10 doesn't accept -KPIC any more. - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' - ;; - pgCC* | pgcpp*) - # Portland Group C++ compiler - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - cxx*) - # Compaq C++ - # Make sure the PIC flag is empty. It appears that all Alpha - # Linux and Compaq Tru64 Unix objects are PIC. - _LT_TAGVAR(lt_prog_compiler_pic, $1)= - _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - xlc* | xlC* | bgxl[[cC]]* | mpixl[[cC]]*) - # IBM XL 8.0, 9.0 on PPC and BlueGene - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' - ;; - *) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) - # Sun C++ 5.9 - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' - ;; - esac - ;; - esac - ;; - lynxos*) - ;; - m88k*) - ;; - mvs*) - case $cc_basename in - cxx*) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall' - ;; - *) - ;; - esac - ;; - netbsd*) - ;; - *qnx* | *nto*) - # QNX uses GNU C++, but need to define -shared option too, otherwise - # it will coredump. - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' - ;; - osf3* | osf4* | osf5*) - case $cc_basename in - KCC*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' - ;; - RCC*) - # Rational C++ 2.4.1 - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - ;; - cxx*) - # Digital/Compaq C++ - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # Make sure the PIC flag is empty. It appears that all Alpha - # Linux and Compaq Tru64 Unix objects are PIC. - _LT_TAGVAR(lt_prog_compiler_pic, $1)= - _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - *) - ;; - esac - ;; - psos*) - ;; - solaris*) - case $cc_basename in - CC* | sunCC*) - # Sun C++ 4.2, 5.x and Centerline C++ - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' - ;; - gcx*) - # Green Hills C++ Compiler - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' - ;; - *) - ;; - esac - ;; - sunos4*) - case $cc_basename in - CC*) - # Sun C++ 4.x - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - lcc*) - # Lucid - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - ;; - *) - ;; - esac - ;; - sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) - case $cc_basename in - CC*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - esac - ;; - tandem*) - case $cc_basename in - NCC*) - # NonStop-UX NCC 3.20 - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - ;; - *) - ;; - esac - ;; - vxworks*) - ;; - *) - _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no - ;; - esac - fi -], -[ - if test "$GCC" = yes; then - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' - - case $host_os in - aix*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - fi - ;; - - amigaos*) - case $host_cpu in - powerpc) - # see comment about AmigaOS4 .so support - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - m68k) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' - ;; - esac - ;; - - beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; - - mingw* | cygwin* | pw32* | os2* | cegcc*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - # Although the cygwin gcc ignores -fPIC, still need this for old-style - # (--disable-auto-import) libraries - m4_if([$1], [GCJ], [], - [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) - ;; - - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' - ;; - - haiku*) - # PIC is the default for Haiku. - # The "-static" flag exists, but is broken. - _LT_TAGVAR(lt_prog_compiler_static, $1)= - ;; - - hpux*) - # PIC is the default for 64-bit PA HP-UX, but not for 32-bit - # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag - # sets the default TLS model and affects inlining. - case $host_cpu in - hppa*64*) - # +Z the default - ;; - *) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - esac - ;; - - interix[[3-9]]*) - # Interix 3.x gcc -fpic/-fPIC options generate broken code. - # Instead, we relocate shared libraries at runtime. - ;; - - msdosdjgpp*) - # Just because we use GCC doesn't mean we suddenly get shared libraries - # on systems that don't support them. - _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no - enable_shared=no - ;; - - *nto* | *qnx*) - # QNX uses GNU C++, but need to define -shared option too, otherwise - # it will coredump. - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' - ;; - - sysv4*MP*) - if test -d /usr/nec; then - _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic - fi - ;; - - *) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - esac - - case $cc_basename in - nvcc*) # Cuda Compiler Driver 2.2 - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Xlinker ' - if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then - _LT_TAGVAR(lt_prog_compiler_pic, $1)="-Xcompiler $_LT_TAGVAR(lt_prog_compiler_pic, $1)" - fi - ;; - esac - else - # PORTME Check for flag to pass linker flags through the system compiler. - case $host_os in - aix*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - else - _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' - fi - ;; - - mingw* | cygwin* | pw32* | os2* | cegcc*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - m4_if([$1], [GCJ], [], - [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) - ;; - - hpux9* | hpux10* | hpux11*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case $host_cpu in - hppa*64*|ia64*) - # +Z the default - ;; - *) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' - ;; - esac - # Is there a better lt_prog_compiler_static that works with the bundled CC? - _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' - ;; - - irix5* | irix6* | nonstopux*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # PIC (with -KPIC) is the default. - _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - - linux* | k*bsd*-gnu | kopensolaris*-gnu) - case $cc_basename in - # old Intel for x86_64 which still supported -KPIC. - ecc*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' - ;; - # icc used to be incompatible with GCC. - # ICC 10 doesn't accept -KPIC any more. - icc* | ifort*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' - ;; - # Lahey Fortran 8.1. - lf95*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared' - _LT_TAGVAR(lt_prog_compiler_static, $1)='--static' - ;; - nagfor*) - # NAG Fortran compiler - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) - # Portland Group compilers (*not* the Pentium gcc compiler, - # which looks to be a dead project) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - ccc*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # All Alpha code is PIC. - _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - xl* | bgxl* | bgf* | mpixl*) - # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' - ;; - *) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [[1-7]].* | *Sun*Fortran*\ 8.[[0-3]]*) - # Sun Fortran 8.3 passes all unrecognized flags to the linker - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - _LT_TAGVAR(lt_prog_compiler_wl, $1)='' - ;; - *Sun\ F* | *Sun*Fortran*) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' - ;; - *Sun\ C*) - # Sun C 5.9 - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - ;; - *Intel*\ [[CF]]*Compiler*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' - ;; - *Portland\ Group*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - esac - ;; - esac - ;; - - newsos6) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - *nto* | *qnx*) - # QNX uses GNU C++, but need to define -shared option too, otherwise - # it will coredump. - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' - ;; - - osf3* | osf4* | osf5*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # All OSF/1 code is PIC. - _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - - rdos*) - _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - - solaris*) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - case $cc_basename in - f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';; - *) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';; - esac - ;; - - sunos4*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - sysv4 | sysv4.2uw2* | sysv4.3*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - sysv4*MP*) - if test -d /usr/nec ;then - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - fi - ;; - - sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - unicos*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no - ;; - - uts4*) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - *) - _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no - ;; - esac - fi -]) -case $host_os in - # For platforms which do not support PIC, -DPIC is meaningless: - *djgpp*) - _LT_TAGVAR(lt_prog_compiler_pic, $1)= - ;; - *) - _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])" - ;; -esac - -AC_CACHE_CHECK([for $compiler option to produce PIC], - [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)], - [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_prog_compiler_pic, $1)]) -_LT_TAGVAR(lt_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_cv_prog_compiler_pic, $1) - -# -# Check to make sure the PIC flag actually works. -# -if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then - _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works], - [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)], - [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [], - [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in - "" | " "*) ;; - *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;; - esac], - [_LT_TAGVAR(lt_prog_compiler_pic, $1)= - _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) -fi -_LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1], - [Additional compiler flags for building library objects]) - -_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1], - [How to pass a linker flag through the compiler]) -# -# Check to make sure the static flag actually works. -# -wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\" -_LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works], - _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1), - $lt_tmp_static_flag, - [], - [_LT_TAGVAR(lt_prog_compiler_static, $1)=]) -_LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1], - [Compiler flag to prevent dynamic linking]) -])# _LT_COMPILER_PIC - - -# _LT_LINKER_SHLIBS([TAGNAME]) -# ---------------------------- -# See if the linker supports building shared libraries. -m4_defun([_LT_LINKER_SHLIBS], -[AC_REQUIRE([LT_PATH_LD])dnl -AC_REQUIRE([LT_PATH_NM])dnl -m4_require([_LT_PATH_MANIFEST_TOOL])dnl -m4_require([_LT_FILEUTILS_DEFAULTS])dnl -m4_require([_LT_DECL_EGREP])dnl -m4_require([_LT_DECL_SED])dnl -m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl -m4_require([_LT_TAG_COMPILER])dnl -AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) -m4_if([$1], [CXX], [ - _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] - case $host_os in - aix[[4-9]]*) - # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to AIX nm, but means don't demangle with GNU nm - # Also, AIX nm treats weak defined symbols like other global defined - # symbols, whereas GNU nm marks them as "W". - if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then - _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' - else - _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' - fi - ;; - pw32*) - _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" - ;; - cygwin* | mingw* | cegcc*) - case $cc_basename in - cl*) - _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' - ;; - *) - _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' - _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'] - ;; - esac - ;; - *) - _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - ;; - esac -], [ - runpath_var= - _LT_TAGVAR(allow_undefined_flag, $1)= - _LT_TAGVAR(always_export_symbols, $1)=no - _LT_TAGVAR(archive_cmds, $1)= - _LT_TAGVAR(archive_expsym_cmds, $1)= - _LT_TAGVAR(compiler_needs_object, $1)=no - _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no - _LT_TAGVAR(export_dynamic_flag_spec, $1)= - _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - _LT_TAGVAR(hardcode_automatic, $1)=no - _LT_TAGVAR(hardcode_direct, $1)=no - _LT_TAGVAR(hardcode_direct_absolute, $1)=no - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= - _LT_TAGVAR(hardcode_libdir_separator, $1)= - _LT_TAGVAR(hardcode_minus_L, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported - _LT_TAGVAR(inherit_rpath, $1)=no - _LT_TAGVAR(link_all_deplibs, $1)=unknown - _LT_TAGVAR(module_cmds, $1)= - _LT_TAGVAR(module_expsym_cmds, $1)= - _LT_TAGVAR(old_archive_from_new_cmds, $1)= - _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)= - _LT_TAGVAR(thread_safe_flag_spec, $1)= - _LT_TAGVAR(whole_archive_flag_spec, $1)= - # include_expsyms should be a list of space-separated symbols to be *always* - # included in the symbol list - _LT_TAGVAR(include_expsyms, $1)= - # exclude_expsyms can be an extended regexp of symbols to exclude - # it will be wrapped by ` (' and `)$', so one must not match beginning or - # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', - # as well as any symbol that contains `d'. - _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] - # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out - # platforms (ab)use it in PIC code, but their linkers get confused if - # the symbol is explicitly referenced. Since portable code cannot - # rely on this symbol name, it's probably fine to never include it in - # preloaded symbol tables. - # Exclude shared library initialization/finalization symbols. -dnl Note also adjust exclude_expsyms for C++ above. - extract_expsyms_cmds= - - case $host_os in - cygwin* | mingw* | pw32* | cegcc*) - # FIXME: the MSVC++ port hasn't been tested in a loooong time - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - if test "$GCC" != yes; then - with_gnu_ld=no - fi - ;; - interix*) - # we just hope/assume this is gcc and not c89 (= MSVC++) - with_gnu_ld=yes - ;; - openbsd*) - with_gnu_ld=no - ;; - esac - - _LT_TAGVAR(ld_shlibs, $1)=yes - - # On some targets, GNU ld is compatible enough with the native linker - # that we're better off using the native interface for both. - lt_use_gnu_ld_interface=no - if test "$with_gnu_ld" = yes; then - case $host_os in - aix*) - # The AIX port of GNU ld has always aspired to compatibility - # with the native linker. However, as the warning in the GNU ld - # block says, versions before 2.19.5* couldn't really create working - # shared libraries, regardless of the interface used. - case `$LD -v 2>&1` in - *\ \(GNU\ Binutils\)\ 2.19.5*) ;; - *\ \(GNU\ Binutils\)\ 2.[[2-9]]*) ;; - *\ \(GNU\ Binutils\)\ [[3-9]]*) ;; - *) - lt_use_gnu_ld_interface=yes - ;; - esac - ;; - *) - lt_use_gnu_ld_interface=yes - ;; - esac - fi - - if test "$lt_use_gnu_ld_interface" = yes; then - # If archive_cmds runs LD, not CC, wlarc should be empty - wlarc='${wl}' - - # Set some defaults for GNU ld with shared library support. These - # are reset later if shared libraries are not supported. Putting them - # here allows them to be overridden if necessary. - runpath_var=LD_RUN_PATH - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - # ancient GNU ld didn't support --whole-archive et. al. - if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then - _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - _LT_TAGVAR(whole_archive_flag_spec, $1)= - fi - supports_anon_versioning=no - case `$LD -v 2>&1` in - *GNU\ gold*) supports_anon_versioning=yes ;; - *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 - *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... - *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... - *\ 2.11.*) ;; # other 2.11 versions - *) supports_anon_versioning=yes ;; - esac - - # See if GNU ld supports shared libraries. - case $host_os in - aix[[3-9]]*) - # On AIX/PPC, the GNU linker is very broken - if test "$host_cpu" != ia64; then - _LT_TAGVAR(ld_shlibs, $1)=no - cat <<_LT_EOF 1>&2 - -*** Warning: the GNU linker, at least up to release 2.19, is reported -*** to be unable to reliably create shared libraries on AIX. -*** Therefore, libtool is disabling shared libraries support. If you -*** really care for shared libraries, you may want to install binutils -*** 2.20 or above, or modify your PATH so that a non-GNU linker is found. -*** You will then need to restart the configuration process. - -_LT_EOF - fi - ;; - - amigaos*) - case $host_cpu in - powerpc) - # see comment about AmigaOS4 .so support - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='' - ;; - m68k) - _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(hardcode_minus_L, $1)=yes - ;; - esac - ;; - - beos*) - if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - # Joseph Beckenbach says some releases of gcc - # support --undefined. This deserves some investigation. FIXME - _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - cygwin* | mingw* | pw32* | cegcc*) - # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, - # as there is no search path for DLLs. - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols' - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_TAGVAR(always_export_symbols, $1)=no - _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' - _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'] - - if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is; otherwise, prepend... - _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname.def; - else - echo EXPORTS > $output_objdir/$soname.def; - cat $export_symbols >> $output_objdir/$soname.def; - fi~ - $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - haiku*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(link_all_deplibs, $1)=yes - ;; - - interix[[3-9]]*) - _LT_TAGVAR(hardcode_direct, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. - # Instead, shared libraries are loaded at an image base (0x10000000 by - # default) and relocated if they conflict, which is a slow very memory - # consuming and fragmenting process. To avoid this, we pick a random, - # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link - # time. Moving up from 0x10000000 also allows more sbrk(2) space. - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - ;; - - gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) - tmp_diet=no - if test "$host_os" = linux-dietlibc; then - case $cc_basename in - diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) - esac - fi - if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ - && test "$tmp_diet" = no - then - tmp_addflag=' $pic_flag' - tmp_sharedflag='-shared' - case $cc_basename,$host_cpu in - pgcc*) # Portland Group C compiler - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' - tmp_addflag=' $pic_flag' - ;; - pgf77* | pgf90* | pgf95* | pgfortran*) - # Portland Group f77 and f90 compilers - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' - tmp_addflag=' $pic_flag -Mnomain' ;; - ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 - tmp_addflag=' -i_dynamic' ;; - efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 - tmp_addflag=' -i_dynamic -nofor_main' ;; - ifc* | ifort*) # Intel Fortran compiler - tmp_addflag=' -nofor_main' ;; - lf95*) # Lahey Fortran 8.1 - _LT_TAGVAR(whole_archive_flag_spec, $1)= - tmp_sharedflag='--shared' ;; - xl[[cC]]* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below) - tmp_sharedflag='-qmkshrobj' - tmp_addflag= ;; - nvcc*) # Cuda Compiler Driver 2.2 - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' - _LT_TAGVAR(compiler_needs_object, $1)=yes - ;; - esac - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) # Sun C 5.9 - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' - _LT_TAGVAR(compiler_needs_object, $1)=yes - tmp_sharedflag='-G' ;; - *Sun\ F*) # Sun Fortran 8.3 - tmp_sharedflag='-G' ;; - esac - _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - - if test "x$supports_anon_versioning" = xyes; then - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - echo "local: *; };" >> $output_objdir/$libname.ver~ - $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' - fi - - case $cc_basename in - xlf* | bgf* | bgxlf* | mpixlf*) - # IBM XL Fortran 10.1 on PPC cannot create shared libs itself - _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' - if test "x$supports_anon_versioning" = xyes; then - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - echo "local: *; };" >> $output_objdir/$libname.ver~ - $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' - fi - ;; - esac - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' - wlarc= - else - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - fi - ;; - - solaris*) - if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then - _LT_TAGVAR(ld_shlibs, $1)=no - cat <<_LT_EOF 1>&2 - -*** Warning: The releases 2.8.* of the GNU linker cannot reliably -*** create shared libraries on Solaris systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.9.1 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. - -_LT_EOF - elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) - case `$LD -v 2>&1` in - *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*) - _LT_TAGVAR(ld_shlibs, $1)=no - cat <<_LT_EOF 1>&2 - -*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not -*** reliably create shared libraries on SCO systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.16.91.0.3 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. - -_LT_EOF - ;; - *) - # For security reasons, it is highly recommended that you always - # use absolute paths for naming shared libraries, and exclude the - # DT_RUNPATH tag from executables and libraries. But doing so - # requires that you compile everything twice, which is a pain. - if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - ;; - - sunos4*) - _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' - wlarc= - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - *) - if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - - if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then - runpath_var= - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= - _LT_TAGVAR(export_dynamic_flag_spec, $1)= - _LT_TAGVAR(whole_archive_flag_spec, $1)= - fi - else - # PORTME fill in a description of your system's linker (not GNU ld) - case $host_os in - aix3*) - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_TAGVAR(always_export_symbols, $1)=yes - _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' - # Note: this linker hardcodes the directories in LIBPATH if there - # are no directories specified by -L. - _LT_TAGVAR(hardcode_minus_L, $1)=yes - if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then - # Neither direct hardcoding nor static linking is supported with a - # broken collect2. - _LT_TAGVAR(hardcode_direct, $1)=unsupported - fi - ;; - - aix[[4-9]]*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag="" - else - # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to AIX nm, but means don't demangle with GNU nm - # Also, AIX nm treats weak defined symbols like other global - # defined symbols, whereas GNU nm marks them as "W". - if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then - _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' - else - _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' - fi - aix_use_runtimelinking=no - - # Test if we are trying to use run time linking or normal - # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # need to do runtime linking. - case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) - for ld_flag in $LDFLAGS; do - if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then - aix_use_runtimelinking=yes - break - fi - done - ;; - esac - - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' - fi - - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - - _LT_TAGVAR(archive_cmds, $1)='' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_direct_absolute, $1)=yes - _LT_TAGVAR(hardcode_libdir_separator, $1)=':' - _LT_TAGVAR(link_all_deplibs, $1)=yes - _LT_TAGVAR(file_list_spec, $1)='${wl}-f,' - - if test "$GCC" = yes; then - case $host_os in aix4.[[012]]|aix4.[[012]].*) - # We only want to do this on AIX 4.2 and lower, the check - # below for broken collect2 doesn't work under 4.3+ - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && - strings "$collect2name" | $GREP resolve_lib_name >/dev/null - then - # We have reworked collect2 - : - else - # We have old collect2 - _LT_TAGVAR(hardcode_direct, $1)=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - _LT_TAGVAR(hardcode_minus_L, $1)=yes - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)= - fi - ;; - esac - shared_flag='-shared' - if test "$aix_use_runtimelinking" = yes; then - shared_flag="$shared_flag "'${wl}-G' - fi - else - # not using gcc - if test "$host_cpu" = ia64; then - # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release - # chokes on -Wl,-G. The following line is correct: - shared_flag='-G' - else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='${wl}-G' - else - shared_flag='${wl}-bM:SRE' - fi - fi - fi - - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall' - # It seems that -bexpall does not export symbols beginning with - # underscore (_), so it is better to generate a list of symbols to export. - _LT_TAGVAR(always_export_symbols, $1)=yes - if test "$aix_use_runtimelinking" = yes; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - _LT_TAGVAR(allow_undefined_flag, $1)='-berok' - # Determine the default libpath from the value encoded in an - # empty executable. - _LT_SYS_MODULE_PATH_AIX([$1]) - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else - if test "$host_cpu" = ia64; then - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' - _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" - _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" - else - # Determine the default libpath from the value encoded in an - # empty executable. - _LT_SYS_MODULE_PATH_AIX([$1]) - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' - _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' - if test "$with_gnu_ld" = yes; then - # We only use this code for GNU lds that support --whole-archive. - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' - else - # Exported symbols can be pulled into shared objects from archives - _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' - fi - _LT_TAGVAR(archive_cmds_need_lc, $1)=yes - # This is similar to how AIX traditionally builds its shared libraries. - _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' - fi - fi - ;; - - amigaos*) - case $host_cpu in - powerpc) - # see comment about AmigaOS4 .so support - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='' - ;; - m68k) - _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(hardcode_minus_L, $1)=yes - ;; - esac - ;; - - bsdi[[45]]*) - _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic - ;; - - cygwin* | mingw* | pw32* | cegcc*) - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - case $cc_basename in - cl*) - # Native MSVC - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_TAGVAR(always_export_symbols, $1)=yes - _LT_TAGVAR(file_list_spec, $1)='@' - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" - # FIXME: Setting linknames here is a bad hack. - _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' - _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; - else - sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; - fi~ - $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ - linknames=' - # The linker will not automatically build a static lib if we build a DLL. - # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' - _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' - _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1,DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols' - # Don't use ranlib - _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib' - _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~ - lt_tool_outputfile="@TOOL_OUTPUT@"~ - case $lt_outputfile in - *.exe|*.EXE) ;; - *) - lt_outputfile="$lt_outputfile.exe" - lt_tool_outputfile="$lt_tool_outputfile.exe" - ;; - esac~ - if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then - $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; - $RM "$lt_outputfile.manifest"; - fi' - ;; - *) - # Assume MSVC wrapper - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" - # FIXME: Setting linknames here is a bad hack. - _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' - # The linker will automatically build a .lib file if we build a DLL. - _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' - # FIXME: Should let the user specify the lib program. - _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs' - _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - ;; - esac - ;; - - darwin* | rhapsody*) - _LT_DARWIN_LINKER_FEATURES($1) - ;; - - dgux*) - _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor - # support. Future versions do this automatically, but an explicit c++rt0.o - # does not break anything, and helps significantly (at the cost of a little - # extra space). - freebsd2.2*) - _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - # Unfortunately, older versions of FreeBSD 2 do not have this feature. - freebsd2.*) - _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_minus_L, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - # FreeBSD 3 and greater uses gcc -shared to do shared libraries. - freebsd* | dragonfly*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - hpux9*) - if test "$GCC" = yes; then - _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - else - _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - fi - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_TAGVAR(hardcode_direct, $1)=yes - - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - _LT_TAGVAR(hardcode_minus_L, $1)=yes - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - ;; - - hpux10*) - if test "$GCC" = yes && test "$with_gnu_ld" = no; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - else - _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' - fi - if test "$with_gnu_ld" = no; then - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_direct_absolute, $1)=yes - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - _LT_TAGVAR(hardcode_minus_L, $1)=yes - fi - ;; - - hpux11*) - if test "$GCC" = yes && test "$with_gnu_ld" = no; then - case $host_cpu in - hppa*64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - ia64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - else - case $host_cpu in - hppa*64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - ia64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - m4_if($1, [], [ - # Older versions of the 11.00 compiler do not understand -b yet - # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does) - _LT_LINKER_OPTION([if $CC understands -b], - _LT_TAGVAR(lt_cv_prog_compiler__b, $1), [-b], - [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'], - [_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'])], - [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags']) - ;; - esac - fi - if test "$with_gnu_ld" = no; then - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - - case $host_cpu in - hppa*64*|ia64*) - _LT_TAGVAR(hardcode_direct, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - *) - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_direct_absolute, $1)=yes - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - _LT_TAGVAR(hardcode_minus_L, $1)=yes - ;; - esac - fi - ;; - - irix5* | irix6* | nonstopux*) - if test "$GCC" = yes; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - # Try to use the -exported_symbol ld option, if it does not - # work, assume that -exports_file does not work either and - # implicitly export all symbols. - # This should be the same for all languages, so no per-tag cache variable. - AC_CACHE_CHECK([whether the $host_os linker accepts -exported_symbol], - [lt_cv_irix_exported_symbol], - [save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" - AC_LINK_IFELSE( - [AC_LANG_SOURCE( - [AC_LANG_CASE([C], [[int foo (void) { return 0; }]], - [C++], [[int foo (void) { return 0; }]], - [Fortran 77], [[ - subroutine foo - end]], - [Fortran], [[ - subroutine foo - end]])])], - [lt_cv_irix_exported_symbol=yes], - [lt_cv_irix_exported_symbol=no]) - LDFLAGS="$save_LDFLAGS"]) - if test "$lt_cv_irix_exported_symbol" = yes; then - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' - fi - else - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' - fi - _LT_TAGVAR(archive_cmds_need_lc, $1)='no' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_TAGVAR(inherit_rpath, $1)=yes - _LT_TAGVAR(link_all_deplibs, $1)=yes - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out - else - _LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF - fi - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - newsos6) - _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - *nto* | *qnx*) - ;; - - openbsd*) - if test -f /usr/libexec/ld.so; then - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_TAGVAR(hardcode_direct_absolute, $1)=yes - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - else - case $host_os in - openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) - _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - ;; - *) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - ;; - esac - fi - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - os2*) - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(hardcode_minus_L, $1)=yes - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' - _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' - ;; - - osf3*) - if test "$GCC" = yes; then - _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' - fi - _LT_TAGVAR(archive_cmds_need_lc, $1)='no' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - ;; - - osf4* | osf5*) # as osf3* with the addition of -msym flag - if test "$GCC" = yes; then - _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - else - _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ - $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' - - # Both c and cxx compiler support -rpath directly - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' - fi - _LT_TAGVAR(archive_cmds_need_lc, $1)='no' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - ;; - - solaris*) - _LT_TAGVAR(no_undefined_flag, $1)=' -z defs' - if test "$GCC" = yes; then - wlarc='${wl}' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' - else - case `$CC -V 2>&1` in - *"Compilers 5.0"*) - wlarc='' - _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' - ;; - *) - wlarc='${wl}' - _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' - ;; - esac - fi - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - case $host_os in - solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; - *) - # The compiler driver will combine and reorder linker options, - # but understands `-z linker_flag'. GCC discards it without `$wl', - # but is careful enough not to reorder. - # Supported since Solaris 2.6 (maybe 2.5.1?) - if test "$GCC" = yes; then - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' - else - _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' - fi - ;; - esac - _LT_TAGVAR(link_all_deplibs, $1)=yes - ;; - - sunos4*) - if test "x$host_vendor" = xsequent; then - # Use $CC to link under sequent, because it throws in some extra .o - # files that make .init and .fini sections work. - _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' - else - _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' - fi - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_minus_L, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - sysv4) - case $host_vendor in - sni) - _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true??? - ;; - siemens) - ## LD is ld it makes a PLAMLIB - ## CC just makes a GrossModule. - _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs' - _LT_TAGVAR(hardcode_direct, $1)=no - ;; - motorola) - _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie - ;; - esac - runpath_var='LD_RUN_PATH' - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - sysv4.3*) - _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport' - ;; - - sysv4*MP*) - if test -d /usr/nec; then - _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - _LT_TAGVAR(ld_shlibs, $1)=yes - fi - ;; - - sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) - _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' - _LT_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - runpath_var='LD_RUN_PATH' - - if test "$GCC" = yes; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - else - _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - ;; - - sysv5* | sco3.2v5* | sco5v6*) - # Note: We can NOT use -z defs as we might desire, because we do not - # link with -lc, and that would cause any symbols used from libc to - # always be unresolved, which means just about no library would - # ever link correctly. If we're not using GNU ld we use -z text - # though, which does catch some bad symbols but isn't as heavy-handed - # as -z defs. - _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' - _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' - _LT_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=':' - _LT_TAGVAR(link_all_deplibs, $1)=yes - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' - runpath_var='LD_RUN_PATH' - - if test "$GCC" = yes; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - else - _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - ;; - - uts4*) - _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - *) - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - esac - - if test x$host_vendor = xsni; then - case $host in - sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym' - ;; - esac - fi - fi -]) -AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) -test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no - -_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld - -_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl -_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl -_LT_DECL([], [extract_expsyms_cmds], [2], - [The commands to extract the exported symbol list from a shared archive]) - -# -# Do we need to explicitly link libc? -# -case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in -x|xyes) - # Assume -lc should be added - _LT_TAGVAR(archive_cmds_need_lc, $1)=yes - - if test "$enable_shared" = yes && test "$GCC" = yes; then - case $_LT_TAGVAR(archive_cmds, $1) in - *'~'*) - # FIXME: we may have to deal with multi-command sequences. - ;; - '$CC '*) - # Test whether the compiler implicitly links with -lc since on some - # systems, -lgcc has to come before -lc. If gcc already passes -lc - # to ld, don't add -lc before -lgcc. - AC_CACHE_CHECK([whether -lc should be explicitly linked in], - [lt_cv_]_LT_TAGVAR(archive_cmds_need_lc, $1), - [$RM conftest* - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - - if AC_TRY_EVAL(ac_compile) 2>conftest.err; then - soname=conftest - lib=conftest - libobjs=conftest.$ac_objext - deplibs= - wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) - pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1) - compiler_flags=-v - linker_flags=-v - verstring= - output_objdir=. - libname=conftest - lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1) - _LT_TAGVAR(allow_undefined_flag, $1)= - if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) - then - lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=no - else - lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=yes - fi - _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag - else - cat conftest.err 1>&5 - fi - $RM conftest* - ]) - _LT_TAGVAR(archive_cmds_need_lc, $1)=$lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1) - ;; - esac - fi - ;; -esac - -_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0], - [Whether or not to add -lc for building shared libraries]) -_LT_TAGDECL([allow_libtool_libs_with_static_runtimes], - [enable_shared_with_static_runtimes], [0], - [Whether or not to disallow shared libs when runtime libs are static]) -_LT_TAGDECL([], [export_dynamic_flag_spec], [1], - [Compiler flag to allow reflexive dlopens]) -_LT_TAGDECL([], [whole_archive_flag_spec], [1], - [Compiler flag to generate shared objects directly from archives]) -_LT_TAGDECL([], [compiler_needs_object], [1], - [Whether the compiler copes with passing no objects directly]) -_LT_TAGDECL([], [old_archive_from_new_cmds], [2], - [Create an old-style archive from a shared archive]) -_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2], - [Create a temporary old-style archive to link instead of a shared archive]) -_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive]) -_LT_TAGDECL([], [archive_expsym_cmds], [2]) -_LT_TAGDECL([], [module_cmds], [2], - [Commands used to build a loadable module if different from building - a shared archive.]) -_LT_TAGDECL([], [module_expsym_cmds], [2]) -_LT_TAGDECL([], [with_gnu_ld], [1], - [Whether we are building with GNU ld or not]) -_LT_TAGDECL([], [allow_undefined_flag], [1], - [Flag that allows shared libraries with undefined symbols to be built]) -_LT_TAGDECL([], [no_undefined_flag], [1], - [Flag that enforces no undefined symbols]) -_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1], - [Flag to hardcode $libdir into a binary during linking. - This must work even if $libdir does not exist]) -_LT_TAGDECL([], [hardcode_libdir_separator], [1], - [Whether we need a single "-rpath" flag with a separated argument]) -_LT_TAGDECL([], [hardcode_direct], [0], - [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes - DIR into the resulting binary]) -_LT_TAGDECL([], [hardcode_direct_absolute], [0], - [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes - DIR into the resulting binary and the resulting library dependency is - "absolute", i.e impossible to change by setting ${shlibpath_var} if the - library is relocated]) -_LT_TAGDECL([], [hardcode_minus_L], [0], - [Set to "yes" if using the -LDIR flag during linking hardcodes DIR - into the resulting binary]) -_LT_TAGDECL([], [hardcode_shlibpath_var], [0], - [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR - into the resulting binary]) -_LT_TAGDECL([], [hardcode_automatic], [0], - [Set to "yes" if building a shared library automatically hardcodes DIR - into the library and all subsequent libraries and executables linked - against it]) -_LT_TAGDECL([], [inherit_rpath], [0], - [Set to yes if linker adds runtime paths of dependent libraries - to runtime path list]) -_LT_TAGDECL([], [link_all_deplibs], [0], - [Whether libtool must link a program against all its dependency libraries]) -_LT_TAGDECL([], [always_export_symbols], [0], - [Set to "yes" if exported symbols are required]) -_LT_TAGDECL([], [export_symbols_cmds], [2], - [The commands to list exported symbols]) -_LT_TAGDECL([], [exclude_expsyms], [1], - [Symbols that should not be listed in the preloaded symbols]) -_LT_TAGDECL([], [include_expsyms], [1], - [Symbols that must always be exported]) -_LT_TAGDECL([], [prelink_cmds], [2], - [Commands necessary for linking programs (against libraries) with templates]) -_LT_TAGDECL([], [postlink_cmds], [2], - [Commands necessary for finishing linking programs]) -_LT_TAGDECL([], [file_list_spec], [1], - [Specify filename containing input files]) -dnl FIXME: Not yet implemented -dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1], -dnl [Compiler flag to generate thread safe objects]) -])# _LT_LINKER_SHLIBS - - -# _LT_LANG_C_CONFIG([TAG]) -# ------------------------ -# Ensure that the configuration variables for a C compiler are suitably -# defined. These variables are subsequently used by _LT_CONFIG to write -# the compiler configuration to `libtool'. -m4_defun([_LT_LANG_C_CONFIG], -[m4_require([_LT_DECL_EGREP])dnl -lt_save_CC="$CC" -AC_LANG_PUSH(C) - -# Source file extension for C test sources. -ac_ext=c - -# Object file extension for compiled C test sources. -objext=o -_LT_TAGVAR(objext, $1)=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code="int some_variable = 0;" - -# Code to be used in simple link tests -lt_simple_link_test_code='int main(){return(0);}' - -_LT_TAG_COMPILER -# Save the default compiler, since it gets overwritten when the other -# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. -compiler_DEFAULT=$CC - -# save warnings/boilerplate of simple test code -_LT_COMPILER_BOILERPLATE -_LT_LINKER_BOILERPLATE - -if test -n "$compiler"; then - _LT_COMPILER_NO_RTTI($1) - _LT_COMPILER_PIC($1) - _LT_COMPILER_C_O($1) - _LT_COMPILER_FILE_LOCKS($1) - _LT_LINKER_SHLIBS($1) - _LT_SYS_DYNAMIC_LINKER($1) - _LT_LINKER_HARDCODE_LIBPATH($1) - LT_SYS_DLOPEN_SELF - _LT_CMD_STRIPLIB - - # Report which library types will actually be built - AC_MSG_CHECKING([if libtool supports shared libraries]) - AC_MSG_RESULT([$can_build_shared]) - - AC_MSG_CHECKING([whether to build shared libraries]) - test "$can_build_shared" = "no" && enable_shared=no - - # On AIX, shared libraries and static libraries use the same namespace, and - # are all built from PIC. - case $host_os in - aix3*) - test "$enable_shared" = yes && enable_static=no - if test -n "$RANLIB"; then - archive_cmds="$archive_cmds~\$RANLIB \$lib" - postinstall_cmds='$RANLIB $lib' - fi - ;; - - aix[[4-9]]*) - if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then - test "$enable_shared" = yes && enable_static=no - fi - ;; - esac - AC_MSG_RESULT([$enable_shared]) - - AC_MSG_CHECKING([whether to build static libraries]) - # Make sure either enable_shared or enable_static is yes. - test "$enable_shared" = yes || enable_static=yes - AC_MSG_RESULT([$enable_static]) - - _LT_CONFIG($1) -fi -AC_LANG_POP -CC="$lt_save_CC" -])# _LT_LANG_C_CONFIG - - -# _LT_LANG_CXX_CONFIG([TAG]) -# -------------------------- -# Ensure that the configuration variables for a C++ compiler are suitably -# defined. These variables are subsequently used by _LT_CONFIG to write -# the compiler configuration to `libtool'. -m4_defun([_LT_LANG_CXX_CONFIG], -[m4_require([_LT_FILEUTILS_DEFAULTS])dnl -m4_require([_LT_DECL_EGREP])dnl -m4_require([_LT_PATH_MANIFEST_TOOL])dnl -if test -n "$CXX" && ( test "X$CXX" != "Xno" && - ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || - (test "X$CXX" != "Xg++"))) ; then - AC_PROG_CXXCPP -else - _lt_caught_CXX_error=yes -fi - -AC_LANG_PUSH(C++) -_LT_TAGVAR(archive_cmds_need_lc, $1)=no -_LT_TAGVAR(allow_undefined_flag, $1)= -_LT_TAGVAR(always_export_symbols, $1)=no -_LT_TAGVAR(archive_expsym_cmds, $1)= -_LT_TAGVAR(compiler_needs_object, $1)=no -_LT_TAGVAR(export_dynamic_flag_spec, $1)= -_LT_TAGVAR(hardcode_direct, $1)=no -_LT_TAGVAR(hardcode_direct_absolute, $1)=no -_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= -_LT_TAGVAR(hardcode_libdir_separator, $1)= -_LT_TAGVAR(hardcode_minus_L, $1)=no -_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported -_LT_TAGVAR(hardcode_automatic, $1)=no -_LT_TAGVAR(inherit_rpath, $1)=no -_LT_TAGVAR(module_cmds, $1)= -_LT_TAGVAR(module_expsym_cmds, $1)= -_LT_TAGVAR(link_all_deplibs, $1)=unknown -_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds -_LT_TAGVAR(reload_flag, $1)=$reload_flag -_LT_TAGVAR(reload_cmds, $1)=$reload_cmds -_LT_TAGVAR(no_undefined_flag, $1)= -_LT_TAGVAR(whole_archive_flag_spec, $1)= -_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no - -# Source file extension for C++ test sources. -ac_ext=cpp - -# Object file extension for compiled C++ test sources. -objext=o -_LT_TAGVAR(objext, $1)=$objext - -# No sense in running all these tests if we already determined that -# the CXX compiler isn't working. Some variables (like enable_shared) -# are currently assumed to apply to all compilers on this platform, -# and will be corrupted by setting them based on a non-working compiler. -if test "$_lt_caught_CXX_error" != yes; then - # Code to be used in simple compile tests - lt_simple_compile_test_code="int some_variable = 0;" - - # Code to be used in simple link tests - lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }' - - # ltmain only uses $CC for tagged configurations so make sure $CC is set. - _LT_TAG_COMPILER - - # save warnings/boilerplate of simple test code - _LT_COMPILER_BOILERPLATE - _LT_LINKER_BOILERPLATE - - # Allow CC to be a program name with arguments. - lt_save_CC=$CC - lt_save_CFLAGS=$CFLAGS - lt_save_LD=$LD - lt_save_GCC=$GCC - GCC=$GXX - lt_save_with_gnu_ld=$with_gnu_ld - lt_save_path_LD=$lt_cv_path_LD - if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then - lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx - else - $as_unset lt_cv_prog_gnu_ld - fi - if test -n "${lt_cv_path_LDCXX+set}"; then - lt_cv_path_LD=$lt_cv_path_LDCXX - else - $as_unset lt_cv_path_LD - fi - test -z "${LDCXX+set}" || LD=$LDCXX - CC=${CXX-"c++"} - CFLAGS=$CXXFLAGS - compiler=$CC - _LT_TAGVAR(compiler, $1)=$CC - _LT_CC_BASENAME([$compiler]) - - if test -n "$compiler"; then - # We don't want -fno-exception when compiling C++ code, so set the - # no_builtin_flag separately - if test "$GXX" = yes; then - _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' - else - _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= - fi - - if test "$GXX" = yes; then - # Set up default GNU C++ configuration - - LT_PATH_LD - - # Check if GNU C++ uses GNU ld as the underlying linker, since the - # archiving commands below assume that GNU ld is being used. - if test "$with_gnu_ld" = yes; then - _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - - # If archive_cmds runs LD, not CC, wlarc should be empty - # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to - # investigate it a little bit more. (MM) - wlarc='${wl}' - - # ancient GNU ld didn't support --whole-archive et. al. - if eval "`$CC -print-prog-name=ld` --help 2>&1" | - $GREP 'no-whole-archive' > /dev/null; then - _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - _LT_TAGVAR(whole_archive_flag_spec, $1)= - fi - else - with_gnu_ld=no - wlarc= - - # A generic and very simple default shared library creation - # command for GNU C++ for the case where it uses the native - # linker, instead of GNU ld. If possible, this setting should - # overridden to take advantage of the native linker features on - # the platform it is being used on. - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' - fi - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' - - else - GXX=no - with_gnu_ld=no - wlarc= - fi - - # PORTME: fill in a description of your system's C++ link characteristics - AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) - _LT_TAGVAR(ld_shlibs, $1)=yes - case $host_os in - aix3*) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - aix[[4-9]]*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag="" - else - aix_use_runtimelinking=no - - # Test if we are trying to use run time linking or normal - # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # need to do runtime linking. - case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) - for ld_flag in $LDFLAGS; do - case $ld_flag in - *-brtl*) - aix_use_runtimelinking=yes - break - ;; - esac - done - ;; - esac - - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' - fi - - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - - _LT_TAGVAR(archive_cmds, $1)='' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_direct_absolute, $1)=yes - _LT_TAGVAR(hardcode_libdir_separator, $1)=':' - _LT_TAGVAR(link_all_deplibs, $1)=yes - _LT_TAGVAR(file_list_spec, $1)='${wl}-f,' - - if test "$GXX" = yes; then - case $host_os in aix4.[[012]]|aix4.[[012]].*) - # We only want to do this on AIX 4.2 and lower, the check - # below for broken collect2 doesn't work under 4.3+ - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && - strings "$collect2name" | $GREP resolve_lib_name >/dev/null - then - # We have reworked collect2 - : - else - # We have old collect2 - _LT_TAGVAR(hardcode_direct, $1)=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - _LT_TAGVAR(hardcode_minus_L, $1)=yes - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)= - fi - esac - shared_flag='-shared' - if test "$aix_use_runtimelinking" = yes; then - shared_flag="$shared_flag "'${wl}-G' - fi - else - # not using gcc - if test "$host_cpu" = ia64; then - # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release - # chokes on -Wl,-G. The following line is correct: - shared_flag='-G' - else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='${wl}-G' - else - shared_flag='${wl}-bM:SRE' - fi - fi - fi - - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall' - # It seems that -bexpall does not export symbols beginning with - # underscore (_), so it is better to generate a list of symbols to - # export. - _LT_TAGVAR(always_export_symbols, $1)=yes - if test "$aix_use_runtimelinking" = yes; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - _LT_TAGVAR(allow_undefined_flag, $1)='-berok' - # Determine the default libpath from the value encoded in an empty - # executable. - _LT_SYS_MODULE_PATH_AIX([$1]) - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else - if test "$host_cpu" = ia64; then - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' - _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" - _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" - else - # Determine the default libpath from the value encoded in an - # empty executable. - _LT_SYS_MODULE_PATH_AIX([$1]) - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' - _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' - if test "$with_gnu_ld" = yes; then - # We only use this code for GNU lds that support --whole-archive. - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' - else - # Exported symbols can be pulled into shared objects from archives - _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' - fi - _LT_TAGVAR(archive_cmds_need_lc, $1)=yes - # This is similar to how AIX traditionally builds its shared - # libraries. - _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' - fi - fi - ;; - - beos*) - if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - # Joseph Beckenbach says some releases of gcc - # support --undefined. This deserves some investigation. FIXME - _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - chorus*) - case $cc_basename in - *) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - - cygwin* | mingw* | pw32* | cegcc*) - case $GXX,$cc_basename in - ,cl* | no,cl*) - # Native MSVC - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_TAGVAR(always_export_symbols, $1)=yes - _LT_TAGVAR(file_list_spec, $1)='@' - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" - # FIXME: Setting linknames here is a bad hack. - _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' - _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; - else - $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; - fi~ - $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ - linknames=' - # The linker will not automatically build a static lib if we build a DLL. - # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' - _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - # Don't use ranlib - _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib' - _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~ - lt_tool_outputfile="@TOOL_OUTPUT@"~ - case $lt_outputfile in - *.exe|*.EXE) ;; - *) - lt_outputfile="$lt_outputfile.exe" - lt_tool_outputfile="$lt_tool_outputfile.exe" - ;; - esac~ - func_to_tool_file "$lt_outputfile"~ - if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then - $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; - $RM "$lt_outputfile.manifest"; - fi' - ;; - *) - # g++ - # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, - # as there is no search path for DLLs. - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols' - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_TAGVAR(always_export_symbols, $1)=no - _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - - if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is; otherwise, prepend... - _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname.def; - else - echo EXPORTS > $output_objdir/$soname.def; - cat $export_symbols >> $output_objdir/$soname.def; - fi~ - $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - ;; - darwin* | rhapsody*) - _LT_DARWIN_LINKER_FEATURES($1) - ;; - - dgux*) - case $cc_basename in - ec++*) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - ghcx*) - # Green Hills C++ Compiler - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - - freebsd2.*) - # C++ shared libraries reported to be fairly broken before - # switch to ELF - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - - freebsd-elf*) - _LT_TAGVAR(archive_cmds_need_lc, $1)=no - ;; - - freebsd* | dragonfly*) - # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF - # conventions - _LT_TAGVAR(ld_shlibs, $1)=yes - ;; - - gnu*) - ;; - - haiku*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(link_all_deplibs, $1)=yes - ;; - - hpux9*) - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, - # but as the default - # location of the library. - - case $cc_basename in - CC*) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - aCC*) - _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' - ;; - *) - if test "$GXX" = yes; then - _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - else - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - ;; - - hpux10*|hpux11*) - if test $with_gnu_ld = no; then - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - - case $host_cpu in - hppa*64*|ia64*) - ;; - *) - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - ;; - esac - fi - case $host_cpu in - hppa*64*|ia64*) - _LT_TAGVAR(hardcode_direct, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - *) - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_direct_absolute, $1)=yes - _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, - # but as the default - # location of the library. - ;; - esac - - case $cc_basename in - CC*) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - aCC*) - case $host_cpu in - hppa*64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - ia64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - *) - _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - esac - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' - ;; - *) - if test "$GXX" = yes; then - if test $with_gnu_ld = no; then - case $host_cpu in - hppa*64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - ia64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - *) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - esac - fi - else - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - ;; - - interix[[3-9]]*) - _LT_TAGVAR(hardcode_direct, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. - # Instead, shared libraries are loaded at an image base (0x10000000 by - # default) and relocated if they conflict, which is a slow very memory - # consuming and fragmenting process. To avoid this, we pick a random, - # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link - # time. Moving up from 0x10000000 also allows more sbrk(2) space. - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - ;; - irix5* | irix6*) - case $cc_basename in - CC*) - # SGI C++ - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' - - # Archives containing C++ object files must be created using - # "CC -ar", where "CC" is the IRIX C++ compiler. This is - # necessary to make sure instantiated templates are included - # in the archive. - _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs' - ;; - *) - if test "$GXX" = yes; then - if test "$with_gnu_ld" = no; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib' - fi - fi - _LT_TAGVAR(link_all_deplibs, $1)=yes - ;; - esac - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_TAGVAR(inherit_rpath, $1)=yes - ;; - - linux* | k*bsd*-gnu | kopensolaris*-gnu) - case $cc_basename in - KCC*) - # Kuck and Associates, Inc. (KAI) C++ Compiler - - # KCC will only create a shared library if the output file - # ends with ".so" (or ".sl" for HP-UX), so rename the library - # to its proper name (with version) after linking. - _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' - - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - - # Archives containing C++ object files must be created using - # "CC -Bstatic", where "CC" is the KAI C++ compiler. - _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' - ;; - icpc* | ecpc* ) - # Intel C++ - with_gnu_ld=yes - # version 8.0 and above of icpc choke on multiply defined symbols - # if we add $predep_objects and $postdep_objects, however 7.1 and - # earlier do not add the objects themselves. - case `$CC -V 2>&1` in - *"Version 7."*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - ;; - *) # Version 8.0 or newer - tmp_idyn= - case $host_cpu in - ia64*) tmp_idyn=' -i_dynamic';; - esac - _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - ;; - esac - _LT_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' - ;; - pgCC* | pgcpp*) - # Portland Group C++ compiler - case `$CC -V` in - *pgCC\ [[1-5]].* | *pgcpp\ [[1-5]].*) - _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~ - rm -rf $tpldir~ - $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~ - compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"' - _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~ - rm -rf $tpldir~ - $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~ - $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~ - $RANLIB $oldlib' - _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~ - rm -rf $tpldir~ - $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ - $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~ - rm -rf $tpldir~ - $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ - $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' - ;; - *) # Version 6 and above use weak symbols - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' - ;; - esac - - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' - ;; - cxx*) - # Compaq C++ - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' - - runpath_var=LD_RUN_PATH - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed' - ;; - xl* | mpixl* | bgxl*) - # IBM XL 8.0 on PPC, with GNU ld - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - if test "x$supports_anon_versioning" = xyes; then - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - echo "local: *; };" >> $output_objdir/$libname.ver~ - $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' - fi - ;; - *) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) - # Sun C++ 5.9 - _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' - _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' - _LT_TAGVAR(compiler_needs_object, $1)=yes - - # Not sure whether something based on - # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 - # would be better. - output_verbose_link_cmd='func_echo_all' - - # Archives containing C++ object files must be created using - # "CC -xar", where "CC" is the Sun C++ compiler. This is - # necessary to make sure instantiated templates are included - # in the archive. - _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' - ;; - esac - ;; - esac - ;; - - lynxos*) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - - m88k*) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - - mvs*) - case $cc_basename in - cxx*) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' - wlarc= - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - fi - # Workaround some broken pre-1.5 toolchains - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' - ;; - - *nto* | *qnx*) - _LT_TAGVAR(ld_shlibs, $1)=yes - ;; - - openbsd2*) - # C++ shared libraries are fairly broken - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - - openbsd*) - if test -f /usr/libexec/ld.so; then - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_TAGVAR(hardcode_direct_absolute, $1)=yes - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - fi - output_verbose_link_cmd=func_echo_all - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - osf3* | osf4* | osf5*) - case $cc_basename in - KCC*) - # Kuck and Associates, Inc. (KAI) C++ Compiler - - # KCC will only create a shared library if the output file - # ends with ".so" (or ".sl" for HP-UX), so rename the library - # to its proper name (with version) after linking. - _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' - - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - - # Archives containing C++ object files must be created using - # the KAI C++ compiler. - case $host in - osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;; - *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;; - esac - ;; - RCC*) - # Rational C++ 2.4.1 - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - cxx*) - case $host in - osf3*) - _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - ;; - *) - _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ - echo "-hidden">> $lib.exp~ - $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~ - $RM $lib.exp' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' - ;; - esac - - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' - ;; - *) - if test "$GXX" = yes && test "$with_gnu_ld" = no; then - _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - case $host in - osf3*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - ;; - *) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - ;; - esac - - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' - - else - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - ;; - - psos*) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - - sunos4*) - case $cc_basename in - CC*) - # Sun C++ 4.x - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - lcc*) - # Lucid - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - - solaris*) - case $cc_basename in - CC* | sunCC*) - # Sun C++ 4.2, 5.x and Centerline C++ - _LT_TAGVAR(archive_cmds_need_lc,$1)=yes - _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' - _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' - - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - case $host_os in - solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; - *) - # The compiler driver will combine and reorder linker options, - # but understands `-z linker_flag'. - # Supported since Solaris 2.6 (maybe 2.5.1?) - _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' - ;; - esac - _LT_TAGVAR(link_all_deplibs, $1)=yes - - output_verbose_link_cmd='func_echo_all' - - # Archives containing C++ object files must be created using - # "CC -xar", where "CC" is the Sun C++ compiler. This is - # necessary to make sure instantiated templates are included - # in the archive. - _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' - ;; - gcx*) - # Green Hills C++ Compiler - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' - - # The C++ compiler must be used to create the archive. - _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs' - ;; - *) - # GNU C++ compiler with Solaris linker - if test "$GXX" = yes && test "$with_gnu_ld" = no; then - _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs' - if $CC --version | $GREP -v '^2\.7' > /dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' - else - # g++ 2.7 appears to require `-G' NOT `-shared' on this - # platform. - _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' - fi - - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir' - case $host_os in - solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; - *) - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' - ;; - esac - fi - ;; - esac - ;; - - sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) - _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' - _LT_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - runpath_var='LD_RUN_PATH' - - case $cc_basename in - CC*) - _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - ;; - - sysv5* | sco3.2v5* | sco5v6*) - # Note: We can NOT use -z defs as we might desire, because we do not - # link with -lc, and that would cause any symbols used from libc to - # always be unresolved, which means just about no library would - # ever link correctly. If we're not using GNU ld we use -z text - # though, which does catch some bad symbols but isn't as heavy-handed - # as -z defs. - _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' - _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' - _LT_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=':' - _LT_TAGVAR(link_all_deplibs, $1)=yes - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' - runpath_var='LD_RUN_PATH' - - case $cc_basename in - CC*) - _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~ - '"$_LT_TAGVAR(old_archive_cmds, $1)" - _LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~ - '"$_LT_TAGVAR(reload_cmds, $1)" - ;; - *) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - ;; - - tandem*) - case $cc_basename in - NCC*) - # NonStop-UX NCC 3.20 - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - - vxworks*) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - - *) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - esac - - AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) - test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no - - _LT_TAGVAR(GCC, $1)="$GXX" - _LT_TAGVAR(LD, $1)="$LD" - - ## CAVEAT EMPTOR: - ## There is no encapsulation within the following macros, do not change - ## the running order or otherwise move them around unless you know exactly - ## what you are doing... - _LT_SYS_HIDDEN_LIBDEPS($1) - _LT_COMPILER_PIC($1) - _LT_COMPILER_C_O($1) - _LT_COMPILER_FILE_LOCKS($1) - _LT_LINKER_SHLIBS($1) - _LT_SYS_DYNAMIC_LINKER($1) - _LT_LINKER_HARDCODE_LIBPATH($1) - - _LT_CONFIG($1) - fi # test -n "$compiler" - - CC=$lt_save_CC - CFLAGS=$lt_save_CFLAGS - LDCXX=$LD - LD=$lt_save_LD - GCC=$lt_save_GCC - with_gnu_ld=$lt_save_with_gnu_ld - lt_cv_path_LDCXX=$lt_cv_path_LD - lt_cv_path_LD=$lt_save_path_LD - lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld - lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld -fi # test "$_lt_caught_CXX_error" != yes - -AC_LANG_POP -])# _LT_LANG_CXX_CONFIG - - -# _LT_FUNC_STRIPNAME_CNF -# ---------------------- -# func_stripname_cnf prefix suffix name -# strip PREFIX and SUFFIX off of NAME. -# PREFIX and SUFFIX must not contain globbing or regex special -# characters, hashes, percent signs, but SUFFIX may contain a leading -# dot (in which case that matches only a dot). -# -# This function is identical to the (non-XSI) version of func_stripname, -# except this one can be used by m4 code that may be executed by configure, -# rather than the libtool script. -m4_defun([_LT_FUNC_STRIPNAME_CNF],[dnl -AC_REQUIRE([_LT_DECL_SED]) -AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH]) -func_stripname_cnf () -{ - case ${2} in - .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; - *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; - esac -} # func_stripname_cnf -])# _LT_FUNC_STRIPNAME_CNF - -# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME]) -# --------------------------------- -# Figure out "hidden" library dependencies from verbose -# compiler output when linking a shared library. -# Parse the compiler output and extract the necessary -# objects, libraries and library flags. -m4_defun([_LT_SYS_HIDDEN_LIBDEPS], -[m4_require([_LT_FILEUTILS_DEFAULTS])dnl -AC_REQUIRE([_LT_FUNC_STRIPNAME_CNF])dnl -# Dependencies to place before and after the object being linked: -_LT_TAGVAR(predep_objects, $1)= -_LT_TAGVAR(postdep_objects, $1)= -_LT_TAGVAR(predeps, $1)= -_LT_TAGVAR(postdeps, $1)= -_LT_TAGVAR(compiler_lib_search_path, $1)= - -dnl we can't use the lt_simple_compile_test_code here, -dnl because it contains code intended for an executable, -dnl not a library. It's possible we should let each -dnl tag define a new lt_????_link_test_code variable, -dnl but it's only used here... -m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF -int a; -void foo (void) { a = 0; } -_LT_EOF -], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF -class Foo -{ -public: - Foo (void) { a = 0; } -private: - int a; -}; -_LT_EOF -], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF - subroutine foo - implicit none - integer*4 a - a=0 - return - end -_LT_EOF -], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF - subroutine foo - implicit none - integer a - a=0 - return - end -_LT_EOF -], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF -public class foo { - private int a; - public void bar (void) { - a = 0; - } -}; -_LT_EOF -], [$1], [GO], [cat > conftest.$ac_ext <<_LT_EOF -package foo -func foo() { -} -_LT_EOF -]) - -_lt_libdeps_save_CFLAGS=$CFLAGS -case "$CC $CFLAGS " in #( -*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;; -*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;; -*\ -fuse-linker-plugin*\ *) CFLAGS="$CFLAGS -fno-use-linker-plugin" ;; -esac - -dnl Parse the compiler output and extract the necessary -dnl objects, libraries and library flags. -if AC_TRY_EVAL(ac_compile); then - # Parse the compiler output and extract the necessary - # objects, libraries and library flags. - - # Sentinel used to keep track of whether or not we are before - # the conftest object file. - pre_test_object_deps_done=no - - for p in `eval "$output_verbose_link_cmd"`; do - case ${prev}${p} in - - -L* | -R* | -l*) - # Some compilers place space between "-{L,R}" and the path. - # Remove the space. - if test $p = "-L" || - test $p = "-R"; then - prev=$p - continue - fi - - # Expand the sysroot to ease extracting the directories later. - if test -z "$prev"; then - case $p in - -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;; - -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;; - -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;; - esac - fi - case $p in - =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;; - esac - if test "$pre_test_object_deps_done" = no; then - case ${prev} in - -L | -R) - # Internal compiler library paths should come after those - # provided the user. The postdeps already come after the - # user supplied libs so there is no need to process them. - if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then - _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}" - else - _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}" - fi - ;; - # The "-l" case would never come before the object being - # linked, so don't bother handling this case. - esac - else - if test -z "$_LT_TAGVAR(postdeps, $1)"; then - _LT_TAGVAR(postdeps, $1)="${prev}${p}" - else - _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}" - fi - fi - prev= - ;; - - *.lto.$objext) ;; # Ignore GCC LTO objects - *.$objext) - # This assumes that the test object file only shows up - # once in the compiler output. - if test "$p" = "conftest.$objext"; then - pre_test_object_deps_done=yes - continue - fi - - if test "$pre_test_object_deps_done" = no; then - if test -z "$_LT_TAGVAR(predep_objects, $1)"; then - _LT_TAGVAR(predep_objects, $1)="$p" - else - _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p" - fi - else - if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then - _LT_TAGVAR(postdep_objects, $1)="$p" - else - _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p" - fi - fi - ;; - - *) ;; # Ignore the rest. - - esac - done - - # Clean up. - rm -f a.out a.exe -else - echo "libtool.m4: error: problem compiling $1 test program" -fi - -$RM -f confest.$objext -CFLAGS=$_lt_libdeps_save_CFLAGS - -# PORTME: override above test on systems where it is broken -m4_if([$1], [CXX], -[case $host_os in -interix[[3-9]]*) - # Interix 3.5 installs completely hosed .la files for C++, so rather than - # hack all around it, let's just trust "g++" to DTRT. - _LT_TAGVAR(predep_objects,$1)= - _LT_TAGVAR(postdep_objects,$1)= - _LT_TAGVAR(postdeps,$1)= - ;; - -linux*) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) - # Sun C++ 5.9 - - # The more standards-conforming stlport4 library is - # incompatible with the Cstd library. Avoid specifying - # it if it's in CXXFLAGS. Ignore libCrun as - # -library=stlport4 depends on it. - case " $CXX $CXXFLAGS " in - *" -library=stlport4 "*) - solaris_use_stlport4=yes - ;; - esac - - if test "$solaris_use_stlport4" != yes; then - _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' - fi - ;; - esac - ;; - -solaris*) - case $cc_basename in - CC* | sunCC*) - # The more standards-conforming stlport4 library is - # incompatible with the Cstd library. Avoid specifying - # it if it's in CXXFLAGS. Ignore libCrun as - # -library=stlport4 depends on it. - case " $CXX $CXXFLAGS " in - *" -library=stlport4 "*) - solaris_use_stlport4=yes - ;; - esac - - # Adding this requires a known-good setup of shared libraries for - # Sun compiler versions before 5.6, else PIC objects from an old - # archive will be linked into the output, leading to subtle bugs. - if test "$solaris_use_stlport4" != yes; then - _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' - fi - ;; - esac - ;; -esac -]) - -case " $_LT_TAGVAR(postdeps, $1) " in -*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;; -esac - _LT_TAGVAR(compiler_lib_search_dirs, $1)= -if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then - _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'` -fi -_LT_TAGDECL([], [compiler_lib_search_dirs], [1], - [The directories searched by this compiler when creating a shared library]) -_LT_TAGDECL([], [predep_objects], [1], - [Dependencies to place before and after the objects being linked to - create a shared library]) -_LT_TAGDECL([], [postdep_objects], [1]) -_LT_TAGDECL([], [predeps], [1]) -_LT_TAGDECL([], [postdeps], [1]) -_LT_TAGDECL([], [compiler_lib_search_path], [1], - [The library search path used internally by the compiler when linking - a shared library]) -])# _LT_SYS_HIDDEN_LIBDEPS - - -# _LT_LANG_F77_CONFIG([TAG]) -# -------------------------- -# Ensure that the configuration variables for a Fortran 77 compiler are -# suitably defined. These variables are subsequently used by _LT_CONFIG -# to write the compiler configuration to `libtool'. -m4_defun([_LT_LANG_F77_CONFIG], -[AC_LANG_PUSH(Fortran 77) -if test -z "$F77" || test "X$F77" = "Xno"; then - _lt_disable_F77=yes -fi - -_LT_TAGVAR(archive_cmds_need_lc, $1)=no -_LT_TAGVAR(allow_undefined_flag, $1)= -_LT_TAGVAR(always_export_symbols, $1)=no -_LT_TAGVAR(archive_expsym_cmds, $1)= -_LT_TAGVAR(export_dynamic_flag_spec, $1)= -_LT_TAGVAR(hardcode_direct, $1)=no -_LT_TAGVAR(hardcode_direct_absolute, $1)=no -_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= -_LT_TAGVAR(hardcode_libdir_separator, $1)= -_LT_TAGVAR(hardcode_minus_L, $1)=no -_LT_TAGVAR(hardcode_automatic, $1)=no -_LT_TAGVAR(inherit_rpath, $1)=no -_LT_TAGVAR(module_cmds, $1)= -_LT_TAGVAR(module_expsym_cmds, $1)= -_LT_TAGVAR(link_all_deplibs, $1)=unknown -_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds -_LT_TAGVAR(reload_flag, $1)=$reload_flag -_LT_TAGVAR(reload_cmds, $1)=$reload_cmds -_LT_TAGVAR(no_undefined_flag, $1)= -_LT_TAGVAR(whole_archive_flag_spec, $1)= -_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no - -# Source file extension for f77 test sources. -ac_ext=f - -# Object file extension for compiled f77 test sources. -objext=o -_LT_TAGVAR(objext, $1)=$objext - -# No sense in running all these tests if we already determined that -# the F77 compiler isn't working. Some variables (like enable_shared) -# are currently assumed to apply to all compilers on this platform, -# and will be corrupted by setting them based on a non-working compiler. -if test "$_lt_disable_F77" != yes; then - # Code to be used in simple compile tests - lt_simple_compile_test_code="\ - subroutine t - return - end -" - - # Code to be used in simple link tests - lt_simple_link_test_code="\ - program t - end -" - - # ltmain only uses $CC for tagged configurations so make sure $CC is set. - _LT_TAG_COMPILER - - # save warnings/boilerplate of simple test code - _LT_COMPILER_BOILERPLATE - _LT_LINKER_BOILERPLATE - - # Allow CC to be a program name with arguments. - lt_save_CC="$CC" - lt_save_GCC=$GCC - lt_save_CFLAGS=$CFLAGS - CC=${F77-"f77"} - CFLAGS=$FFLAGS - compiler=$CC - _LT_TAGVAR(compiler, $1)=$CC - _LT_CC_BASENAME([$compiler]) - GCC=$G77 - if test -n "$compiler"; then - AC_MSG_CHECKING([if libtool supports shared libraries]) - AC_MSG_RESULT([$can_build_shared]) - - AC_MSG_CHECKING([whether to build shared libraries]) - test "$can_build_shared" = "no" && enable_shared=no - - # On AIX, shared libraries and static libraries use the same namespace, and - # are all built from PIC. - case $host_os in - aix3*) - test "$enable_shared" = yes && enable_static=no - if test -n "$RANLIB"; then - archive_cmds="$archive_cmds~\$RANLIB \$lib" - postinstall_cmds='$RANLIB $lib' - fi - ;; - aix[[4-9]]*) - if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then - test "$enable_shared" = yes && enable_static=no - fi - ;; - esac - AC_MSG_RESULT([$enable_shared]) - - AC_MSG_CHECKING([whether to build static libraries]) - # Make sure either enable_shared or enable_static is yes. - test "$enable_shared" = yes || enable_static=yes - AC_MSG_RESULT([$enable_static]) - - _LT_TAGVAR(GCC, $1)="$G77" - _LT_TAGVAR(LD, $1)="$LD" - - ## CAVEAT EMPTOR: - ## There is no encapsulation within the following macros, do not change - ## the running order or otherwise move them around unless you know exactly - ## what you are doing... - _LT_COMPILER_PIC($1) - _LT_COMPILER_C_O($1) - _LT_COMPILER_FILE_LOCKS($1) - _LT_LINKER_SHLIBS($1) - _LT_SYS_DYNAMIC_LINKER($1) - _LT_LINKER_HARDCODE_LIBPATH($1) - - _LT_CONFIG($1) - fi # test -n "$compiler" - - GCC=$lt_save_GCC - CC="$lt_save_CC" - CFLAGS="$lt_save_CFLAGS" -fi # test "$_lt_disable_F77" != yes - -AC_LANG_POP -])# _LT_LANG_F77_CONFIG - - -# _LT_LANG_FC_CONFIG([TAG]) -# ------------------------- -# Ensure that the configuration variables for a Fortran compiler are -# suitably defined. These variables are subsequently used by _LT_CONFIG -# to write the compiler configuration to `libtool'. -m4_defun([_LT_LANG_FC_CONFIG], -[AC_LANG_PUSH(Fortran) - -if test -z "$FC" || test "X$FC" = "Xno"; then - _lt_disable_FC=yes -fi - -_LT_TAGVAR(archive_cmds_need_lc, $1)=no -_LT_TAGVAR(allow_undefined_flag, $1)= -_LT_TAGVAR(always_export_symbols, $1)=no -_LT_TAGVAR(archive_expsym_cmds, $1)= -_LT_TAGVAR(export_dynamic_flag_spec, $1)= -_LT_TAGVAR(hardcode_direct, $1)=no -_LT_TAGVAR(hardcode_direct_absolute, $1)=no -_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= -_LT_TAGVAR(hardcode_libdir_separator, $1)= -_LT_TAGVAR(hardcode_minus_L, $1)=no -_LT_TAGVAR(hardcode_automatic, $1)=no -_LT_TAGVAR(inherit_rpath, $1)=no -_LT_TAGVAR(module_cmds, $1)= -_LT_TAGVAR(module_expsym_cmds, $1)= -_LT_TAGVAR(link_all_deplibs, $1)=unknown -_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds -_LT_TAGVAR(reload_flag, $1)=$reload_flag -_LT_TAGVAR(reload_cmds, $1)=$reload_cmds -_LT_TAGVAR(no_undefined_flag, $1)= -_LT_TAGVAR(whole_archive_flag_spec, $1)= -_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no - -# Source file extension for fc test sources. -ac_ext=${ac_fc_srcext-f} - -# Object file extension for compiled fc test sources. -objext=o -_LT_TAGVAR(objext, $1)=$objext - -# No sense in running all these tests if we already determined that -# the FC compiler isn't working. Some variables (like enable_shared) -# are currently assumed to apply to all compilers on this platform, -# and will be corrupted by setting them based on a non-working compiler. -if test "$_lt_disable_FC" != yes; then - # Code to be used in simple compile tests - lt_simple_compile_test_code="\ - subroutine t - return - end -" - - # Code to be used in simple link tests - lt_simple_link_test_code="\ - program t - end -" - - # ltmain only uses $CC for tagged configurations so make sure $CC is set. - _LT_TAG_COMPILER - - # save warnings/boilerplate of simple test code - _LT_COMPILER_BOILERPLATE - _LT_LINKER_BOILERPLATE - - # Allow CC to be a program name with arguments. - lt_save_CC="$CC" - lt_save_GCC=$GCC - lt_save_CFLAGS=$CFLAGS - CC=${FC-"f95"} - CFLAGS=$FCFLAGS - compiler=$CC - GCC=$ac_cv_fc_compiler_gnu - - _LT_TAGVAR(compiler, $1)=$CC - _LT_CC_BASENAME([$compiler]) - - if test -n "$compiler"; then - AC_MSG_CHECKING([if libtool supports shared libraries]) - AC_MSG_RESULT([$can_build_shared]) - - AC_MSG_CHECKING([whether to build shared libraries]) - test "$can_build_shared" = "no" && enable_shared=no - - # On AIX, shared libraries and static libraries use the same namespace, and - # are all built from PIC. - case $host_os in - aix3*) - test "$enable_shared" = yes && enable_static=no - if test -n "$RANLIB"; then - archive_cmds="$archive_cmds~\$RANLIB \$lib" - postinstall_cmds='$RANLIB $lib' - fi - ;; - aix[[4-9]]*) - if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then - test "$enable_shared" = yes && enable_static=no - fi - ;; - esac - AC_MSG_RESULT([$enable_shared]) - - AC_MSG_CHECKING([whether to build static libraries]) - # Make sure either enable_shared or enable_static is yes. - test "$enable_shared" = yes || enable_static=yes - AC_MSG_RESULT([$enable_static]) - - _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu" - _LT_TAGVAR(LD, $1)="$LD" - - ## CAVEAT EMPTOR: - ## There is no encapsulation within the following macros, do not change - ## the running order or otherwise move them around unless you know exactly - ## what you are doing... - _LT_SYS_HIDDEN_LIBDEPS($1) - _LT_COMPILER_PIC($1) - _LT_COMPILER_C_O($1) - _LT_COMPILER_FILE_LOCKS($1) - _LT_LINKER_SHLIBS($1) - _LT_SYS_DYNAMIC_LINKER($1) - _LT_LINKER_HARDCODE_LIBPATH($1) - - _LT_CONFIG($1) - fi # test -n "$compiler" - - GCC=$lt_save_GCC - CC=$lt_save_CC - CFLAGS=$lt_save_CFLAGS -fi # test "$_lt_disable_FC" != yes - -AC_LANG_POP -])# _LT_LANG_FC_CONFIG - - -# _LT_LANG_GCJ_CONFIG([TAG]) -# -------------------------- -# Ensure that the configuration variables for the GNU Java Compiler compiler -# are suitably defined. These variables are subsequently used by _LT_CONFIG -# to write the compiler configuration to `libtool'. -m4_defun([_LT_LANG_GCJ_CONFIG], -[AC_REQUIRE([LT_PROG_GCJ])dnl -AC_LANG_SAVE - -# Source file extension for Java test sources. -ac_ext=java - -# Object file extension for compiled Java test sources. -objext=o -_LT_TAGVAR(objext, $1)=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code="class foo {}" - -# Code to be used in simple link tests -lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }' - -# ltmain only uses $CC for tagged configurations so make sure $CC is set. -_LT_TAG_COMPILER - -# save warnings/boilerplate of simple test code -_LT_COMPILER_BOILERPLATE -_LT_LINKER_BOILERPLATE - -# Allow CC to be a program name with arguments. -lt_save_CC=$CC -lt_save_CFLAGS=$CFLAGS -lt_save_GCC=$GCC -GCC=yes -CC=${GCJ-"gcj"} -CFLAGS=$GCJFLAGS -compiler=$CC -_LT_TAGVAR(compiler, $1)=$CC -_LT_TAGVAR(LD, $1)="$LD" -_LT_CC_BASENAME([$compiler]) - -# GCJ did not exist at the time GCC didn't implicitly link libc in. -_LT_TAGVAR(archive_cmds_need_lc, $1)=no - -_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds -_LT_TAGVAR(reload_flag, $1)=$reload_flag -_LT_TAGVAR(reload_cmds, $1)=$reload_cmds - -if test -n "$compiler"; then - _LT_COMPILER_NO_RTTI($1) - _LT_COMPILER_PIC($1) - _LT_COMPILER_C_O($1) - _LT_COMPILER_FILE_LOCKS($1) - _LT_LINKER_SHLIBS($1) - _LT_LINKER_HARDCODE_LIBPATH($1) - - _LT_CONFIG($1) -fi - -AC_LANG_RESTORE - -GCC=$lt_save_GCC -CC=$lt_save_CC -CFLAGS=$lt_save_CFLAGS -])# _LT_LANG_GCJ_CONFIG - - -# _LT_LANG_GO_CONFIG([TAG]) -# -------------------------- -# Ensure that the configuration variables for the GNU Go compiler -# are suitably defined. These variables are subsequently used by _LT_CONFIG -# to write the compiler configuration to `libtool'. -m4_defun([_LT_LANG_GO_CONFIG], -[AC_REQUIRE([LT_PROG_GO])dnl -AC_LANG_SAVE - -# Source file extension for Go test sources. -ac_ext=go - -# Object file extension for compiled Go test sources. -objext=o -_LT_TAGVAR(objext, $1)=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code="package main; func main() { }" - -# Code to be used in simple link tests -lt_simple_link_test_code='package main; func main() { }' - -# ltmain only uses $CC for tagged configurations so make sure $CC is set. -_LT_TAG_COMPILER - -# save warnings/boilerplate of simple test code -_LT_COMPILER_BOILERPLATE -_LT_LINKER_BOILERPLATE - -# Allow CC to be a program name with arguments. -lt_save_CC=$CC -lt_save_CFLAGS=$CFLAGS -lt_save_GCC=$GCC -GCC=yes -CC=${GOC-"gccgo"} -CFLAGS=$GOFLAGS -compiler=$CC -_LT_TAGVAR(compiler, $1)=$CC -_LT_TAGVAR(LD, $1)="$LD" -_LT_CC_BASENAME([$compiler]) - -# Go did not exist at the time GCC didn't implicitly link libc in. -_LT_TAGVAR(archive_cmds_need_lc, $1)=no - -_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds -_LT_TAGVAR(reload_flag, $1)=$reload_flag -_LT_TAGVAR(reload_cmds, $1)=$reload_cmds - -if test -n "$compiler"; then - _LT_COMPILER_NO_RTTI($1) - _LT_COMPILER_PIC($1) - _LT_COMPILER_C_O($1) - _LT_COMPILER_FILE_LOCKS($1) - _LT_LINKER_SHLIBS($1) - _LT_LINKER_HARDCODE_LIBPATH($1) - - _LT_CONFIG($1) -fi - -AC_LANG_RESTORE - -GCC=$lt_save_GCC -CC=$lt_save_CC -CFLAGS=$lt_save_CFLAGS -])# _LT_LANG_GO_CONFIG - - -# _LT_LANG_RC_CONFIG([TAG]) -# ------------------------- -# Ensure that the configuration variables for the Windows resource compiler -# are suitably defined. These variables are subsequently used by _LT_CONFIG -# to write the compiler configuration to `libtool'. -m4_defun([_LT_LANG_RC_CONFIG], -[AC_REQUIRE([LT_PROG_RC])dnl -AC_LANG_SAVE - -# Source file extension for RC test sources. -ac_ext=rc - -# Object file extension for compiled RC test sources. -objext=o -_LT_TAGVAR(objext, $1)=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }' - -# Code to be used in simple link tests -lt_simple_link_test_code="$lt_simple_compile_test_code" - -# ltmain only uses $CC for tagged configurations so make sure $CC is set. -_LT_TAG_COMPILER - -# save warnings/boilerplate of simple test code -_LT_COMPILER_BOILERPLATE -_LT_LINKER_BOILERPLATE - -# Allow CC to be a program name with arguments. -lt_save_CC="$CC" -lt_save_CFLAGS=$CFLAGS -lt_save_GCC=$GCC -GCC= -CC=${RC-"windres"} -CFLAGS= -compiler=$CC -_LT_TAGVAR(compiler, $1)=$CC -_LT_CC_BASENAME([$compiler]) -_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes - -if test -n "$compiler"; then - : - _LT_CONFIG($1) -fi - -GCC=$lt_save_GCC -AC_LANG_RESTORE -CC=$lt_save_CC -CFLAGS=$lt_save_CFLAGS -])# _LT_LANG_RC_CONFIG - - -# LT_PROG_GCJ -# ----------- -AC_DEFUN([LT_PROG_GCJ], -[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ], - [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ], - [AC_CHECK_TOOL(GCJ, gcj,) - test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2" - AC_SUBST(GCJFLAGS)])])[]dnl -]) - -# Old name: -AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([LT_AC_PROG_GCJ], []) - - -# LT_PROG_GO -# ---------- -AC_DEFUN([LT_PROG_GO], -[AC_CHECK_TOOL(GOC, gccgo,) -]) - - -# LT_PROG_RC -# ---------- -AC_DEFUN([LT_PROG_RC], -[AC_CHECK_TOOL(RC, windres,) -]) - -# Old name: -AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([LT_AC_PROG_RC], []) - - -# _LT_DECL_EGREP -# -------------- -# If we don't have a new enough Autoconf to choose the best grep -# available, choose the one first in the user's PATH. -m4_defun([_LT_DECL_EGREP], -[AC_REQUIRE([AC_PROG_EGREP])dnl -AC_REQUIRE([AC_PROG_FGREP])dnl -test -z "$GREP" && GREP=grep -_LT_DECL([], [GREP], [1], [A grep program that handles long lines]) -_LT_DECL([], [EGREP], [1], [An ERE matcher]) -_LT_DECL([], [FGREP], [1], [A literal string matcher]) -dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too -AC_SUBST([GREP]) -]) - - -# _LT_DECL_OBJDUMP -# -------------- -# If we don't have a new enough Autoconf to choose the best objdump -# available, choose the one first in the user's PATH. -m4_defun([_LT_DECL_OBJDUMP], -[AC_CHECK_TOOL(OBJDUMP, objdump, false) -test -z "$OBJDUMP" && OBJDUMP=objdump -_LT_DECL([], [OBJDUMP], [1], [An object symbol dumper]) -AC_SUBST([OBJDUMP]) -]) - -# _LT_DECL_DLLTOOL -# ---------------- -# Ensure DLLTOOL variable is set. -m4_defun([_LT_DECL_DLLTOOL], -[AC_CHECK_TOOL(DLLTOOL, dlltool, false) -test -z "$DLLTOOL" && DLLTOOL=dlltool -_LT_DECL([], [DLLTOOL], [1], [DLL creation program]) -AC_SUBST([DLLTOOL]) -]) - -# _LT_DECL_SED -# ------------ -# Check for a fully-functional sed program, that truncates -# as few characters as possible. Prefer GNU sed if found. -m4_defun([_LT_DECL_SED], -[AC_PROG_SED -test -z "$SED" && SED=sed -Xsed="$SED -e 1s/^X//" -_LT_DECL([], [SED], [1], [A sed program that does not truncate output]) -_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"], - [Sed that helps us avoid accidentally triggering echo(1) options like -n]) -])# _LT_DECL_SED - -m4_ifndef([AC_PROG_SED], [ -# NOTE: This macro has been submitted for inclusion into # -# GNU Autoconf as AC_PROG_SED. When it is available in # -# a released version of Autoconf we should remove this # -# macro and use it instead. # - -m4_defun([AC_PROG_SED], -[AC_MSG_CHECKING([for a sed that does not truncate output]) -AC_CACHE_VAL(lt_cv_path_SED, -[# Loop through the user's path and test for sed and gsed. -# Then use that list of sed's as ones to test for truncation. -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for lt_ac_prog in sed gsed; do - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then - lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" - fi - done - done -done -IFS=$as_save_IFS -lt_ac_max=0 -lt_ac_count=0 -# Add /usr/xpg4/bin/sed as it is typically found on Solaris -# along with /bin/sed that truncates output. -for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do - test ! -f $lt_ac_sed && continue - cat /dev/null > conftest.in - lt_ac_count=0 - echo $ECHO_N "0123456789$ECHO_C" >conftest.in - # Check for GNU sed and select it if it is found. - if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then - lt_cv_path_SED=$lt_ac_sed - break - fi - while true; do - cat conftest.in conftest.in >conftest.tmp - mv conftest.tmp conftest.in - cp conftest.in conftest.nl - echo >>conftest.nl - $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break - cmp -s conftest.out conftest.nl || break - # 10000 chars as input seems more than enough - test $lt_ac_count -gt 10 && break - lt_ac_count=`expr $lt_ac_count + 1` - if test $lt_ac_count -gt $lt_ac_max; then - lt_ac_max=$lt_ac_count - lt_cv_path_SED=$lt_ac_sed - fi - done -done -]) -SED=$lt_cv_path_SED -AC_SUBST([SED]) -AC_MSG_RESULT([$SED]) -])#AC_PROG_SED -])#m4_ifndef - -# Old name: -AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([LT_AC_PROG_SED], []) - - -# _LT_CHECK_SHELL_FEATURES -# ------------------------ -# Find out whether the shell is Bourne or XSI compatible, -# or has some other useful features. -m4_defun([_LT_CHECK_SHELL_FEATURES], -[AC_MSG_CHECKING([whether the shell understands some XSI constructs]) -# Try some XSI features -xsi_shell=no -( _lt_dummy="a/b/c" - test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \ - = c,a/b,b/c, \ - && eval 'test $(( 1 + 1 )) -eq 2 \ - && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ - && xsi_shell=yes -AC_MSG_RESULT([$xsi_shell]) -_LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell']) - -AC_MSG_CHECKING([whether the shell understands "+="]) -lt_shell_append=no -( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \ - >/dev/null 2>&1 \ - && lt_shell_append=yes -AC_MSG_RESULT([$lt_shell_append]) -_LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append']) - -if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then - lt_unset=unset -else - lt_unset=false -fi -_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl - -# test EBCDIC or ASCII -case `echo X|tr X '\101'` in - A) # ASCII based system - # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr - lt_SP2NL='tr \040 \012' - lt_NL2SP='tr \015\012 \040\040' - ;; - *) # EBCDIC based system - lt_SP2NL='tr \100 \n' - lt_NL2SP='tr \r\n \100\100' - ;; -esac -_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl -_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl -])# _LT_CHECK_SHELL_FEATURES - - -# _LT_PROG_FUNCTION_REPLACE (FUNCNAME, REPLACEMENT-BODY) -# ------------------------------------------------------ -# In `$cfgfile', look for function FUNCNAME delimited by `^FUNCNAME ()$' and -# '^} FUNCNAME ', and replace its body with REPLACEMENT-BODY. -m4_defun([_LT_PROG_FUNCTION_REPLACE], -[dnl { -sed -e '/^$1 ()$/,/^} # $1 /c\ -$1 ()\ -{\ -m4_bpatsubsts([$2], [$], [\\], [^\([ ]\)], [\\\1]) -} # Extended-shell $1 implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: -]) - - -# _LT_PROG_REPLACE_SHELLFNS -# ------------------------- -# Replace existing portable implementations of several shell functions with -# equivalent extended shell implementations where those features are available.. -m4_defun([_LT_PROG_REPLACE_SHELLFNS], -[if test x"$xsi_shell" = xyes; then - _LT_PROG_FUNCTION_REPLACE([func_dirname], [dnl - case ${1} in - */*) func_dirname_result="${1%/*}${2}" ;; - * ) func_dirname_result="${3}" ;; - esac]) - - _LT_PROG_FUNCTION_REPLACE([func_basename], [dnl - func_basename_result="${1##*/}"]) - - _LT_PROG_FUNCTION_REPLACE([func_dirname_and_basename], [dnl - case ${1} in - */*) func_dirname_result="${1%/*}${2}" ;; - * ) func_dirname_result="${3}" ;; - esac - func_basename_result="${1##*/}"]) - - _LT_PROG_FUNCTION_REPLACE([func_stripname], [dnl - # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are - # positional parameters, so assign one to ordinary parameter first. - func_stripname_result=${3} - func_stripname_result=${func_stripname_result#"${1}"} - func_stripname_result=${func_stripname_result%"${2}"}]) - - _LT_PROG_FUNCTION_REPLACE([func_split_long_opt], [dnl - func_split_long_opt_name=${1%%=*} - func_split_long_opt_arg=${1#*=}]) - - _LT_PROG_FUNCTION_REPLACE([func_split_short_opt], [dnl - func_split_short_opt_arg=${1#??} - func_split_short_opt_name=${1%"$func_split_short_opt_arg"}]) - - _LT_PROG_FUNCTION_REPLACE([func_lo2o], [dnl - case ${1} in - *.lo) func_lo2o_result=${1%.lo}.${objext} ;; - *) func_lo2o_result=${1} ;; - esac]) - - _LT_PROG_FUNCTION_REPLACE([func_xform], [ func_xform_result=${1%.*}.lo]) - - _LT_PROG_FUNCTION_REPLACE([func_arith], [ func_arith_result=$(( $[*] ))]) - - _LT_PROG_FUNCTION_REPLACE([func_len], [ func_len_result=${#1}]) -fi - -if test x"$lt_shell_append" = xyes; then - _LT_PROG_FUNCTION_REPLACE([func_append], [ eval "${1}+=\\${2}"]) - - _LT_PROG_FUNCTION_REPLACE([func_append_quoted], [dnl - func_quote_for_eval "${2}" -dnl m4 expansion turns \\\\ into \\, and then the shell eval turns that into \ - eval "${1}+=\\\\ \\$func_quote_for_eval_result"]) - - # Save a `func_append' function call where possible by direct use of '+=' - sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") - test 0 -eq $? || _lt_function_replace_fail=: -else - # Save a `func_append' function call even when '+=' is not available - sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") - test 0 -eq $? || _lt_function_replace_fail=: -fi - -if test x"$_lt_function_replace_fail" = x":"; then - AC_MSG_WARN([Unable to substitute extended shell functions in $ofile]) -fi -]) - -# _LT_PATH_CONVERSION_FUNCTIONS -# ----------------------------- -# Determine which file name conversion functions should be used by -# func_to_host_file (and, implicitly, by func_to_host_path). These are needed -# for certain cross-compile configurations and native mingw. -m4_defun([_LT_PATH_CONVERSION_FUNCTIONS], -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -AC_REQUIRE([AC_CANONICAL_BUILD])dnl -AC_MSG_CHECKING([how to convert $build file names to $host format]) -AC_CACHE_VAL(lt_cv_to_host_file_cmd, -[case $host in - *-*-mingw* ) - case $build in - *-*-mingw* ) # actually msys - lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32 - ;; - *-*-cygwin* ) - lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32 - ;; - * ) # otherwise, assume *nix - lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32 - ;; - esac - ;; - *-*-cygwin* ) - case $build in - *-*-mingw* ) # actually msys - lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin - ;; - *-*-cygwin* ) - lt_cv_to_host_file_cmd=func_convert_file_noop - ;; - * ) # otherwise, assume *nix - lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin - ;; - esac - ;; - * ) # unhandled hosts (and "normal" native builds) - lt_cv_to_host_file_cmd=func_convert_file_noop - ;; -esac -]) -to_host_file_cmd=$lt_cv_to_host_file_cmd -AC_MSG_RESULT([$lt_cv_to_host_file_cmd]) -_LT_DECL([to_host_file_cmd], [lt_cv_to_host_file_cmd], - [0], [convert $build file names to $host format])dnl - -AC_MSG_CHECKING([how to convert $build file names to toolchain format]) -AC_CACHE_VAL(lt_cv_to_tool_file_cmd, -[#assume ordinary cross tools, or native build. -lt_cv_to_tool_file_cmd=func_convert_file_noop -case $host in - *-*-mingw* ) - case $build in - *-*-mingw* ) # actually msys - lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32 - ;; - esac - ;; -esac -]) -to_tool_file_cmd=$lt_cv_to_tool_file_cmd -AC_MSG_RESULT([$lt_cv_to_tool_file_cmd]) -_LT_DECL([to_tool_file_cmd], [lt_cv_to_tool_file_cmd], - [0], [convert $build files to toolchain format])dnl -])# _LT_PATH_CONVERSION_FUNCTIONS - -# Helper functions for option handling. -*- Autoconf -*- -# -# Copyright (C) 2004, 2005, 2007, 2008, 2009 Free Software Foundation, -# Inc. -# Written by Gary V. Vaughan, 2004 -# -# This file is free software; the Free Software Foundation gives -# unlimited permission to copy and/or distribute it, with or without -# modifications, as long as this notice is preserved. - -# serial 7 ltoptions.m4 - -# This is to help aclocal find these macros, as it can't see m4_define. -AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])]) - - -# _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME) -# ------------------------------------------ -m4_define([_LT_MANGLE_OPTION], -[[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])]) - - -# _LT_SET_OPTION(MACRO-NAME, OPTION-NAME) -# --------------------------------------- -# Set option OPTION-NAME for macro MACRO-NAME, and if there is a -# matching handler defined, dispatch to it. Other OPTION-NAMEs are -# saved as a flag. -m4_define([_LT_SET_OPTION], -[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl -m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]), - _LT_MANGLE_DEFUN([$1], [$2]), - [m4_warning([Unknown $1 option `$2'])])[]dnl -]) - - -# _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET]) -# ------------------------------------------------------------ -# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. -m4_define([_LT_IF_OPTION], -[m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])]) - - -# _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET) -# ------------------------------------------------------- -# Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME -# are set. -m4_define([_LT_UNLESS_OPTIONS], -[m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), - [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option), - [m4_define([$0_found])])])[]dnl -m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3 -])[]dnl -]) - - -# _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST) -# ---------------------------------------- -# OPTION-LIST is a space-separated list of Libtool options associated -# with MACRO-NAME. If any OPTION has a matching handler declared with -# LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about -# the unknown option and exit. -m4_defun([_LT_SET_OPTIONS], -[# Set options -m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), - [_LT_SET_OPTION([$1], _LT_Option)]) - -m4_if([$1],[LT_INIT],[ - dnl - dnl Simply set some default values (i.e off) if boolean options were not - dnl specified: - _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no - ]) - _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no - ]) - dnl - dnl If no reference was made to various pairs of opposing options, then - dnl we run the default mode handler for the pair. For example, if neither - dnl `shared' nor `disable-shared' was passed, we enable building of shared - dnl archives by default: - _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED]) - _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC]) - _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC]) - _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install], - [_LT_ENABLE_FAST_INSTALL]) - ]) -])# _LT_SET_OPTIONS - - - -# _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME) -# ----------------------------------------- -m4_define([_LT_MANGLE_DEFUN], -[[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])]) - - -# LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE) -# ----------------------------------------------- -m4_define([LT_OPTION_DEFINE], -[m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl -])# LT_OPTION_DEFINE - - -# dlopen -# ------ -LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes -]) - -AU_DEFUN([AC_LIBTOOL_DLOPEN], -[_LT_SET_OPTION([LT_INIT], [dlopen]) -AC_DIAGNOSE([obsolete], -[$0: Remove this warning and the call to _LT_SET_OPTION when you -put the `dlopen' option into LT_INIT's first parameter.]) -]) - -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], []) - - -# win32-dll -# --------- -# Declare package support for building win32 dll's. -LT_OPTION_DEFINE([LT_INIT], [win32-dll], -[enable_win32_dll=yes - -case $host in -*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*) - AC_CHECK_TOOL(AS, as, false) - AC_CHECK_TOOL(DLLTOOL, dlltool, false) - AC_CHECK_TOOL(OBJDUMP, objdump, false) - ;; -esac - -test -z "$AS" && AS=as -_LT_DECL([], [AS], [1], [Assembler program])dnl - -test -z "$DLLTOOL" && DLLTOOL=dlltool -_LT_DECL([], [DLLTOOL], [1], [DLL creation program])dnl - -test -z "$OBJDUMP" && OBJDUMP=objdump -_LT_DECL([], [OBJDUMP], [1], [Object dumper program])dnl -])# win32-dll - -AU_DEFUN([AC_LIBTOOL_WIN32_DLL], -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -_LT_SET_OPTION([LT_INIT], [win32-dll]) -AC_DIAGNOSE([obsolete], -[$0: Remove this warning and the call to _LT_SET_OPTION when you -put the `win32-dll' option into LT_INIT's first parameter.]) -]) - -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], []) - - -# _LT_ENABLE_SHARED([DEFAULT]) -# ---------------------------- -# implement the --enable-shared flag, and supports the `shared' and -# `disable-shared' LT_INIT options. -# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. -m4_define([_LT_ENABLE_SHARED], -[m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl -AC_ARG_ENABLE([shared], - [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@], - [build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])], - [p=${PACKAGE-default} - case $enableval in - yes) enable_shared=yes ;; - no) enable_shared=no ;; - *) - enable_shared=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_shared=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac], - [enable_shared=]_LT_ENABLE_SHARED_DEFAULT) - - _LT_DECL([build_libtool_libs], [enable_shared], [0], - [Whether or not to build shared libraries]) -])# _LT_ENABLE_SHARED - -LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])]) -LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])]) - -# Old names: -AC_DEFUN([AC_ENABLE_SHARED], -[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared]) -]) - -AC_DEFUN([AC_DISABLE_SHARED], -[_LT_SET_OPTION([LT_INIT], [disable-shared]) -]) - -AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) -AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) - -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AM_ENABLE_SHARED], []) -dnl AC_DEFUN([AM_DISABLE_SHARED], []) - - - -# _LT_ENABLE_STATIC([DEFAULT]) -# ---------------------------- -# implement the --enable-static flag, and support the `static' and -# `disable-static' LT_INIT options. -# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. -m4_define([_LT_ENABLE_STATIC], -[m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl -AC_ARG_ENABLE([static], - [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@], - [build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])], - [p=${PACKAGE-default} - case $enableval in - yes) enable_static=yes ;; - no) enable_static=no ;; - *) - enable_static=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_static=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac], - [enable_static=]_LT_ENABLE_STATIC_DEFAULT) - - _LT_DECL([build_old_libs], [enable_static], [0], - [Whether or not to build static libraries]) -])# _LT_ENABLE_STATIC - -LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])]) -LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])]) - -# Old names: -AC_DEFUN([AC_ENABLE_STATIC], -[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static]) -]) - -AC_DEFUN([AC_DISABLE_STATIC], -[_LT_SET_OPTION([LT_INIT], [disable-static]) -]) - -AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) -AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) - -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AM_ENABLE_STATIC], []) -dnl AC_DEFUN([AM_DISABLE_STATIC], []) - - - -# _LT_ENABLE_FAST_INSTALL([DEFAULT]) -# ---------------------------------- -# implement the --enable-fast-install flag, and support the `fast-install' -# and `disable-fast-install' LT_INIT options. -# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. -m4_define([_LT_ENABLE_FAST_INSTALL], -[m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl -AC_ARG_ENABLE([fast-install], - [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@], - [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])], - [p=${PACKAGE-default} - case $enableval in - yes) enable_fast_install=yes ;; - no) enable_fast_install=no ;; - *) - enable_fast_install=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_fast_install=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac], - [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT) - -_LT_DECL([fast_install], [enable_fast_install], [0], - [Whether or not to optimize for fast installation])dnl -])# _LT_ENABLE_FAST_INSTALL - -LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])]) -LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])]) - -# Old names: -AU_DEFUN([AC_ENABLE_FAST_INSTALL], -[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install]) -AC_DIAGNOSE([obsolete], -[$0: Remove this warning and the call to _LT_SET_OPTION when you put -the `fast-install' option into LT_INIT's first parameter.]) -]) - -AU_DEFUN([AC_DISABLE_FAST_INSTALL], -[_LT_SET_OPTION([LT_INIT], [disable-fast-install]) -AC_DIAGNOSE([obsolete], -[$0: Remove this warning and the call to _LT_SET_OPTION when you put -the `disable-fast-install' option into LT_INIT's first parameter.]) -]) - -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], []) -dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], []) - - -# _LT_WITH_PIC([MODE]) -# -------------------- -# implement the --with-pic flag, and support the `pic-only' and `no-pic' -# LT_INIT options. -# MODE is either `yes' or `no'. If omitted, it defaults to `both'. -m4_define([_LT_WITH_PIC], -[AC_ARG_WITH([pic], - [AS_HELP_STRING([--with-pic@<:@=PKGS@:>@], - [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], - [lt_p=${PACKAGE-default} - case $withval in - yes|no) pic_mode=$withval ;; - *) - pic_mode=default - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for lt_pkg in $withval; do - IFS="$lt_save_ifs" - if test "X$lt_pkg" = "X$lt_p"; then - pic_mode=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac], - [pic_mode=default]) - -test -z "$pic_mode" && pic_mode=m4_default([$1], [default]) - -_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl -])# _LT_WITH_PIC - -LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])]) -LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])]) - -# Old name: -AU_DEFUN([AC_LIBTOOL_PICMODE], -[_LT_SET_OPTION([LT_INIT], [pic-only]) -AC_DIAGNOSE([obsolete], -[$0: Remove this warning and the call to _LT_SET_OPTION when you -put the `pic-only' option into LT_INIT's first parameter.]) -]) - -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_LIBTOOL_PICMODE], []) - - -m4_define([_LTDL_MODE], []) -LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive], - [m4_define([_LTDL_MODE], [nonrecursive])]) -LT_OPTION_DEFINE([LTDL_INIT], [recursive], - [m4_define([_LTDL_MODE], [recursive])]) -LT_OPTION_DEFINE([LTDL_INIT], [subproject], - [m4_define([_LTDL_MODE], [subproject])]) - -m4_define([_LTDL_TYPE], []) -LT_OPTION_DEFINE([LTDL_INIT], [installable], - [m4_define([_LTDL_TYPE], [installable])]) -LT_OPTION_DEFINE([LTDL_INIT], [convenience], - [m4_define([_LTDL_TYPE], [convenience])]) - -# ltsugar.m4 -- libtool m4 base layer. -*-Autoconf-*- -# -# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc. -# Written by Gary V. Vaughan, 2004 -# -# This file is free software; the Free Software Foundation gives -# unlimited permission to copy and/or distribute it, with or without -# modifications, as long as this notice is preserved. - -# serial 6 ltsugar.m4 - -# This is to help aclocal find these macros, as it can't see m4_define. -AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])]) - - -# lt_join(SEP, ARG1, [ARG2...]) -# ----------------------------- -# Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their -# associated separator. -# Needed until we can rely on m4_join from Autoconf 2.62, since all earlier -# versions in m4sugar had bugs. -m4_define([lt_join], -[m4_if([$#], [1], [], - [$#], [2], [[$2]], - [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])]) -m4_define([_lt_join], -[m4_if([$#$2], [2], [], - [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])]) - - -# lt_car(LIST) -# lt_cdr(LIST) -# ------------ -# Manipulate m4 lists. -# These macros are necessary as long as will still need to support -# Autoconf-2.59 which quotes differently. -m4_define([lt_car], [[$1]]) -m4_define([lt_cdr], -[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])], - [$#], 1, [], - [m4_dquote(m4_shift($@))])]) -m4_define([lt_unquote], $1) - - -# lt_append(MACRO-NAME, STRING, [SEPARATOR]) -# ------------------------------------------ -# Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'. -# Note that neither SEPARATOR nor STRING are expanded; they are appended -# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked). -# No SEPARATOR is output if MACRO-NAME was previously undefined (different -# than defined and empty). -# -# This macro is needed until we can rely on Autoconf 2.62, since earlier -# versions of m4sugar mistakenly expanded SEPARATOR but not STRING. -m4_define([lt_append], -[m4_define([$1], - m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])]) - - - -# lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...]) -# ---------------------------------------------------------- -# Produce a SEP delimited list of all paired combinations of elements of -# PREFIX-LIST with SUFFIX1 through SUFFIXn. Each element of the list -# has the form PREFIXmINFIXSUFFIXn. -# Needed until we can rely on m4_combine added in Autoconf 2.62. -m4_define([lt_combine], -[m4_if(m4_eval([$# > 3]), [1], - [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl -[[m4_foreach([_Lt_prefix], [$2], - [m4_foreach([_Lt_suffix], - ]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[, - [_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])]) - - -# lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ]) -# ----------------------------------------------------------------------- -# Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited -# by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ. -m4_define([lt_if_append_uniq], -[m4_ifdef([$1], - [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1], - [lt_append([$1], [$2], [$3])$4], - [$5])], - [lt_append([$1], [$2], [$3])$4])]) - - -# lt_dict_add(DICT, KEY, VALUE) -# ----------------------------- -m4_define([lt_dict_add], -[m4_define([$1($2)], [$3])]) - - -# lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE) -# -------------------------------------------- -m4_define([lt_dict_add_subkey], -[m4_define([$1($2:$3)], [$4])]) - - -# lt_dict_fetch(DICT, KEY, [SUBKEY]) -# ---------------------------------- -m4_define([lt_dict_fetch], -[m4_ifval([$3], - m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]), - m4_ifdef([$1($2)], [m4_defn([$1($2)])]))]) - - -# lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE]) -# ----------------------------------------------------------------- -m4_define([lt_if_dict_fetch], -[m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4], - [$5], - [$6])]) - - -# lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...]) -# -------------------------------------------------------------- -m4_define([lt_dict_filter], -[m4_if([$5], [], [], - [lt_join(m4_quote(m4_default([$4], [[, ]])), - lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]), - [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl -]) - -# ltversion.m4 -- version numbers -*- Autoconf -*- -# -# Copyright (C) 2004 Free Software Foundation, Inc. -# Written by Scott James Remnant, 2004 -# -# This file is free software; the Free Software Foundation gives -# unlimited permission to copy and/or distribute it, with or without -# modifications, as long as this notice is preserved. - -# @configure_input@ - -# serial 3337 ltversion.m4 -# This file is part of GNU Libtool - -m4_define([LT_PACKAGE_VERSION], [2.4.2]) -m4_define([LT_PACKAGE_REVISION], [1.3337]) - -AC_DEFUN([LTVERSION_VERSION], -[macro_version='2.4.2' -macro_revision='1.3337' -_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?]) -_LT_DECL(, macro_revision, 0) -]) - -# lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*- -# -# Copyright (C) 2004, 2005, 2007, 2009 Free Software Foundation, Inc. -# Written by Scott James Remnant, 2004. -# -# This file is free software; the Free Software Foundation gives -# unlimited permission to copy and/or distribute it, with or without -# modifications, as long as this notice is preserved. - -# serial 5 lt~obsolete.m4 - -# These exist entirely to fool aclocal when bootstrapping libtool. -# -# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN) -# which have later been changed to m4_define as they aren't part of the -# exported API, or moved to Autoconf or Automake where they belong. -# -# The trouble is, aclocal is a bit thick. It'll see the old AC_DEFUN -# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us -# using a macro with the same name in our local m4/libtool.m4 it'll -# pull the old libtool.m4 in (it doesn't see our shiny new m4_define -# and doesn't know about Autoconf macros at all.) -# -# So we provide this file, which has a silly filename so it's always -# included after everything else. This provides aclocal with the -# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything -# because those macros already exist, or will be overwritten later. -# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6. -# -# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here. -# Yes, that means every name once taken will need to remain here until -# we give up compatibility with versions before 1.7, at which point -# we need to keep only those names which we still refer to. - -# This is to help aclocal find these macros, as it can't see m4_define. -AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])]) - -m4_ifndef([AC_LIBTOOL_LINKER_OPTION], [AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])]) -m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP])]) -m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])]) -m4_ifndef([_LT_AC_SHELL_INIT], [AC_DEFUN([_LT_AC_SHELL_INIT])]) -m4_ifndef([_LT_AC_SYS_LIBPATH_AIX], [AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])]) -m4_ifndef([_LT_PROG_LTMAIN], [AC_DEFUN([_LT_PROG_LTMAIN])]) -m4_ifndef([_LT_AC_TAGVAR], [AC_DEFUN([_LT_AC_TAGVAR])]) -m4_ifndef([AC_LTDL_ENABLE_INSTALL], [AC_DEFUN([AC_LTDL_ENABLE_INSTALL])]) -m4_ifndef([AC_LTDL_PREOPEN], [AC_DEFUN([AC_LTDL_PREOPEN])]) -m4_ifndef([_LT_AC_SYS_COMPILER], [AC_DEFUN([_LT_AC_SYS_COMPILER])]) -m4_ifndef([_LT_AC_LOCK], [AC_DEFUN([_LT_AC_LOCK])]) -m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE], [AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])]) -m4_ifndef([_LT_AC_TRY_DLOPEN_SELF], [AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])]) -m4_ifndef([AC_LIBTOOL_PROG_CC_C_O], [AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])]) -m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])]) -m4_ifndef([AC_LIBTOOL_OBJDIR], [AC_DEFUN([AC_LIBTOOL_OBJDIR])]) -m4_ifndef([AC_LTDL_OBJDIR], [AC_DEFUN([AC_LTDL_OBJDIR])]) -m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])]) -m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP], [AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])]) -m4_ifndef([AC_PATH_MAGIC], [AC_DEFUN([AC_PATH_MAGIC])]) -m4_ifndef([AC_PROG_LD_GNU], [AC_DEFUN([AC_PROG_LD_GNU])]) -m4_ifndef([AC_PROG_LD_RELOAD_FLAG], [AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])]) -m4_ifndef([AC_DEPLIBS_CHECK_METHOD], [AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])]) -m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])]) -m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])]) -m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])]) -m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS], [AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])]) -m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP], [AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])]) -m4_ifndef([LT_AC_PROG_EGREP], [AC_DEFUN([LT_AC_PROG_EGREP])]) -m4_ifndef([LT_AC_PROG_SED], [AC_DEFUN([LT_AC_PROG_SED])]) -m4_ifndef([_LT_CC_BASENAME], [AC_DEFUN([_LT_CC_BASENAME])]) -m4_ifndef([_LT_COMPILER_BOILERPLATE], [AC_DEFUN([_LT_COMPILER_BOILERPLATE])]) -m4_ifndef([_LT_LINKER_BOILERPLATE], [AC_DEFUN([_LT_LINKER_BOILERPLATE])]) -m4_ifndef([_AC_PROG_LIBTOOL], [AC_DEFUN([_AC_PROG_LIBTOOL])]) -m4_ifndef([AC_LIBTOOL_SETUP], [AC_DEFUN([AC_LIBTOOL_SETUP])]) -m4_ifndef([_LT_AC_CHECK_DLFCN], [AC_DEFUN([_LT_AC_CHECK_DLFCN])]) -m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER], [AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])]) -m4_ifndef([_LT_AC_TAGCONFIG], [AC_DEFUN([_LT_AC_TAGCONFIG])]) -m4_ifndef([AC_DISABLE_FAST_INSTALL], [AC_DEFUN([AC_DISABLE_FAST_INSTALL])]) -m4_ifndef([_LT_AC_LANG_CXX], [AC_DEFUN([_LT_AC_LANG_CXX])]) -m4_ifndef([_LT_AC_LANG_F77], [AC_DEFUN([_LT_AC_LANG_F77])]) -m4_ifndef([_LT_AC_LANG_GCJ], [AC_DEFUN([_LT_AC_LANG_GCJ])]) -m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])]) -m4_ifndef([_LT_AC_LANG_C_CONFIG], [AC_DEFUN([_LT_AC_LANG_C_CONFIG])]) -m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])]) -m4_ifndef([_LT_AC_LANG_CXX_CONFIG], [AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])]) -m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])]) -m4_ifndef([_LT_AC_LANG_F77_CONFIG], [AC_DEFUN([_LT_AC_LANG_F77_CONFIG])]) -m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])]) -m4_ifndef([_LT_AC_LANG_GCJ_CONFIG], [AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])]) -m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])]) -m4_ifndef([_LT_AC_LANG_RC_CONFIG], [AC_DEFUN([_LT_AC_LANG_RC_CONFIG])]) -m4_ifndef([AC_LIBTOOL_CONFIG], [AC_DEFUN([AC_LIBTOOL_CONFIG])]) -m4_ifndef([_LT_AC_FILE_LTDLL_C], [AC_DEFUN([_LT_AC_FILE_LTDLL_C])]) -m4_ifndef([_LT_REQUIRED_DARWIN_CHECKS], [AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS])]) -m4_ifndef([_LT_AC_PROG_CXXCPP], [AC_DEFUN([_LT_AC_PROG_CXXCPP])]) -m4_ifndef([_LT_PREPARE_SED_QUOTE_VARS], [AC_DEFUN([_LT_PREPARE_SED_QUOTE_VARS])]) -m4_ifndef([_LT_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_PROG_ECHO_BACKSLASH])]) -m4_ifndef([_LT_PROG_F77], [AC_DEFUN([_LT_PROG_F77])]) -m4_ifndef([_LT_PROG_FC], [AC_DEFUN([_LT_PROG_FC])]) -m4_ifndef([_LT_PROG_CXX], [AC_DEFUN([_LT_PROG_CXX])]) - -# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008, 2011 Free Software -# Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 1 - -# AM_AUTOMAKE_VERSION(VERSION) -# ---------------------------- -# Automake X.Y traces this macro to ensure aclocal.m4 has been -# generated from the m4 files accompanying Automake X.Y. -# (This private macro should not be called outside this file.) -AC_DEFUN([AM_AUTOMAKE_VERSION], -[am__api_version='1.11' -dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to -dnl require some minimum version. Point them to the right macro. -m4_if([$1], [1.11.2], [], - [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl -]) - -# _AM_AUTOCONF_VERSION(VERSION) -# ----------------------------- -# aclocal traces this macro to find the Autoconf version. -# This is a private macro too. Using m4_define simplifies -# the logic in aclocal, which can simply ignore this definition. -m4_define([_AM_AUTOCONF_VERSION], []) - -# AM_SET_CURRENT_AUTOMAKE_VERSION -# ------------------------------- -# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. -# This function is AC_REQUIREd by AM_INIT_AUTOMAKE. -AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], -[AM_AUTOMAKE_VERSION([1.11.2])dnl -m4_ifndef([AC_AUTOCONF_VERSION], - [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl -_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) - -# AM_AUX_DIR_EXPAND -*- Autoconf -*- - -# Copyright (C) 2001, 2003, 2005, 2011 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 1 - -# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets -# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to -# `$srcdir', `$srcdir/..', or `$srcdir/../..'. -# -# Of course, Automake must honor this variable whenever it calls a -# tool from the auxiliary directory. The problem is that $srcdir (and -# therefore $ac_aux_dir as well) can be either absolute or relative, -# depending on how configure is run. This is pretty annoying, since -# it makes $ac_aux_dir quite unusable in subdirectories: in the top -# source directory, any form will work fine, but in subdirectories a -# relative path needs to be adjusted first. -# -# $ac_aux_dir/missing -# fails when called from a subdirectory if $ac_aux_dir is relative -# $top_srcdir/$ac_aux_dir/missing -# fails if $ac_aux_dir is absolute, -# fails when called from a subdirectory in a VPATH build with -# a relative $ac_aux_dir -# -# The reason of the latter failure is that $top_srcdir and $ac_aux_dir -# are both prefixed by $srcdir. In an in-source build this is usually -# harmless because $srcdir is `.', but things will broke when you -# start a VPATH build or use an absolute $srcdir. -# -# So we could use something similar to $top_srcdir/$ac_aux_dir/missing, -# iff we strip the leading $srcdir from $ac_aux_dir. That would be: -# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` -# and then we would define $MISSING as -# MISSING="\${SHELL} $am_aux_dir/missing" -# This will work as long as MISSING is not called from configure, because -# unfortunately $(top_srcdir) has no meaning in configure. -# However there are other variables, like CC, which are often used in -# configure, and could therefore not use this "fixed" $ac_aux_dir. -# -# Another solution, used here, is to always expand $ac_aux_dir to an -# absolute PATH. The drawback is that using absolute paths prevent a -# configured tree to be moved without reconfiguration. - -AC_DEFUN([AM_AUX_DIR_EXPAND], -[dnl Rely on autoconf to set up CDPATH properly. -AC_PREREQ([2.50])dnl -# expand $ac_aux_dir to an absolute path -am_aux_dir=`cd $ac_aux_dir && pwd` -]) - -# AM_CONDITIONAL -*- Autoconf -*- - -# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008 -# Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 9 - -# AM_CONDITIONAL(NAME, SHELL-CONDITION) -# ------------------------------------- -# Define a conditional. -AC_DEFUN([AM_CONDITIONAL], -[AC_PREREQ(2.52)dnl - ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], - [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl -AC_SUBST([$1_TRUE])dnl -AC_SUBST([$1_FALSE])dnl -_AM_SUBST_NOTMAKE([$1_TRUE])dnl -_AM_SUBST_NOTMAKE([$1_FALSE])dnl -m4_define([_AM_COND_VALUE_$1], [$2])dnl -if $2; then - $1_TRUE= - $1_FALSE='#' -else - $1_TRUE='#' - $1_FALSE= -fi -AC_CONFIG_COMMANDS_PRE( -[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then - AC_MSG_ERROR([[conditional "$1" was never defined. -Usually this means the macro was only invoked conditionally.]]) -fi])]) - -# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009, -# 2010, 2011 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 12 - -# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be -# written in clear, in which case automake, when reading aclocal.m4, -# will think it sees a *use*, and therefore will trigger all it's -# C support machinery. Also note that it means that autoscan, seeing -# CC etc. in the Makefile, will ask for an AC_PROG_CC use... - - -# _AM_DEPENDENCIES(NAME) -# ---------------------- -# See how the compiler implements dependency checking. -# NAME is "CC", "CXX", "GCJ", or "OBJC". -# We try a few techniques and use that to set a single cache variable. -# -# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was -# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular -# dependency, and given that the user is not expected to run this macro, -# just rely on AC_PROG_CC. -AC_DEFUN([_AM_DEPENDENCIES], -[AC_REQUIRE([AM_SET_DEPDIR])dnl -AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl -AC_REQUIRE([AM_MAKE_INCLUDE])dnl -AC_REQUIRE([AM_DEP_TRACK])dnl - -ifelse([$1], CC, [depcc="$CC" am_compiler_list=], - [$1], CXX, [depcc="$CXX" am_compiler_list=], - [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], - [$1], UPC, [depcc="$UPC" am_compiler_list=], - [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], - [depcc="$$1" am_compiler_list=]) - -AC_CACHE_CHECK([dependency style of $depcc], - [am_cv_$1_dependencies_compiler_type], -[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then - # We make a subdir and do the tests there. Otherwise we can end up - # making bogus files that we don't know about and never remove. For - # instance it was reported that on HP-UX the gcc test will end up - # making a dummy file named `D' -- because `-MD' means `put the output - # in D'. - rm -rf conftest.dir - mkdir conftest.dir - # Copy depcomp to subdir because otherwise we won't find it if we're - # using a relative directory. - cp "$am_depcomp" conftest.dir - cd conftest.dir - # We will build objects and dependencies in a subdirectory because - # it helps to detect inapplicable dependency modes. For instance - # both Tru64's cc and ICC support -MD to output dependencies as a - # side effect of compilation, but ICC will put the dependencies in - # the current directory while Tru64 will put them in the object - # directory. - mkdir sub - - am_cv_$1_dependencies_compiler_type=none - if test "$am_compiler_list" = ""; then - am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` - fi - am__universal=false - m4_case([$1], [CC], - [case " $depcc " in #( - *\ -arch\ *\ -arch\ *) am__universal=true ;; - esac], - [CXX], - [case " $depcc " in #( - *\ -arch\ *\ -arch\ *) am__universal=true ;; - esac]) - - for depmode in $am_compiler_list; do - # Setup a source with many dependencies, because some compilers - # like to wrap large dependency lists on column 80 (with \), and - # we should not choose a depcomp mode which is confused by this. - # - # We need to recreate these files for each test, as the compiler may - # overwrite some of them when testing with obscure command lines. - # This happens at least with the AIX C compiler. - : > sub/conftest.c - for i in 1 2 3 4 5 6; do - echo '#include "conftst'$i'.h"' >> sub/conftest.c - # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with - # Solaris 8's {/usr,}/bin/sh. - touch sub/conftst$i.h - done - echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf - - # We check with `-c' and `-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle `-M -o', and we need to detect this. Also, some Intel - # versions had trouble with output in subdirs - am__obj=sub/conftest.${OBJEXT-o} - am__minus_obj="-o $am__obj" - case $depmode in - gcc) - # This depmode causes a compiler race in universal mode. - test "$am__universal" = false || continue - ;; - nosideeffect) - # after this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested - if test "x$enable_dependency_tracking" = xyes; then - continue - else - break - fi - ;; - msvc7 | msvc7msys | msvisualcpp | msvcmsys) - # This compiler won't grok `-c -o', but also, the minuso test has - # not run yet. These depmodes are late enough in the game, and - # so weak that their functioning should not be impacted. - am__obj=conftest.${OBJEXT-o} - am__minus_obj= - ;; - none) break ;; - esac - if depmode=$depmode \ - source=sub/conftest.c object=$am__obj \ - depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ - $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ - >/dev/null 2>conftest.err && - grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && - grep $am__obj sub/conftest.Po > /dev/null 2>&1 && - ${MAKE-make} -s -f confmf > /dev/null 2>&1; then - # icc doesn't choke on unknown options, it will just issue warnings - # or remarks (even with -Werror). So we grep stderr for any message - # that says an option was ignored or not supported. - # When given -MP, icc 7.0 and 7.1 complain thusly: - # icc: Command line warning: ignoring option '-M'; no argument required - # The diagnosis changed in icc 8.0: - # icc: Command line remark: option '-MP' not supported - if (grep 'ignoring option' conftest.err || - grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else - am_cv_$1_dependencies_compiler_type=$depmode - break - fi - fi - done - - cd .. - rm -rf conftest.dir -else - am_cv_$1_dependencies_compiler_type=none -fi -]) -AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) -AM_CONDITIONAL([am__fastdep$1], [ - test "x$enable_dependency_tracking" != xno \ - && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) -]) - - -# AM_SET_DEPDIR -# ------------- -# Choose a directory name for dependency files. -# This macro is AC_REQUIREd in _AM_DEPENDENCIES -AC_DEFUN([AM_SET_DEPDIR], -[AC_REQUIRE([AM_SET_LEADING_DOT])dnl -AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl -]) - - -# AM_DEP_TRACK -# ------------ -AC_DEFUN([AM_DEP_TRACK], -[AC_ARG_ENABLE(dependency-tracking, -[ --disable-dependency-tracking speeds up one-time build - --enable-dependency-tracking do not reject slow dependency extractors]) -if test "x$enable_dependency_tracking" != xno; then - am_depcomp="$ac_aux_dir/depcomp" - AMDEPBACKSLASH='\' - am__nodep='_no' -fi -AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) -AC_SUBST([AMDEPBACKSLASH])dnl -_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl -AC_SUBST([am__nodep])dnl -_AM_SUBST_NOTMAKE([am__nodep])dnl -]) - -# Generate code to set up dependency tracking. -*- Autoconf -*- - -# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008 -# Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -#serial 5 - -# _AM_OUTPUT_DEPENDENCY_COMMANDS -# ------------------------------ -AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], -[{ - # Autoconf 2.62 quotes --file arguments for eval, but not when files - # are listed without --file. Let's play safe and only enable the eval - # if we detect the quoting. - case $CONFIG_FILES in - *\'*) eval set x "$CONFIG_FILES" ;; - *) set x $CONFIG_FILES ;; - esac - shift - for mf - do - # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named `Makefile.in', but - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. - # Grep'ing the whole file is not good either: AIX grep has a line - # limit of 2048, but all sed's we know have understand at least 4000. - if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then - dirpart=`AS_DIRNAME("$mf")` - else - continue - fi - # Extract the definition of DEPDIR, am__include, and am__quote - # from the Makefile without running `make'. - DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` - test -z "$DEPDIR" && continue - am__include=`sed -n 's/^am__include = //p' < "$mf"` - test -z "am__include" && continue - am__quote=`sed -n 's/^am__quote = //p' < "$mf"` - # When using ansi2knr, U may be empty or an underscore; expand it - U=`sed -n 's/^U = //p' < "$mf"` - # Find all dependency output files, they are included files with - # $(DEPDIR) in their names. We invoke sed twice because it is the - # simplest approach to changing $(DEPDIR) to its actual value in the - # expansion. - for file in `sed -n " - s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`AS_DIRNAME(["$file"])` - AS_MKDIR_P([$dirpart/$fdir]) - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" - done - done -} -])# _AM_OUTPUT_DEPENDENCY_COMMANDS - - -# AM_OUTPUT_DEPENDENCY_COMMANDS -# ----------------------------- -# This macro should only be invoked once -- use via AC_REQUIRE. -# -# This code is only required when automatic dependency tracking -# is enabled. FIXME. This creates each `.P' file that we will -# need in order to bootstrap the dependency handling code. -AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], -[AC_CONFIG_COMMANDS([depfiles], - [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], - [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) -]) - -# Do all the work for Automake. -*- Autoconf -*- - -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, -# 2005, 2006, 2008, 2009 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 16 - -# This macro actually does too much. Some checks are only needed if -# your package does certain things. But this isn't really a big deal. - -# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) -# AM_INIT_AUTOMAKE([OPTIONS]) -# ----------------------------------------------- -# The call with PACKAGE and VERSION arguments is the old style -# call (pre autoconf-2.50), which is being phased out. PACKAGE -# and VERSION should now be passed to AC_INIT and removed from -# the call to AM_INIT_AUTOMAKE. -# We support both call styles for the transition. After -# the next Automake release, Autoconf can make the AC_INIT -# arguments mandatory, and then we can depend on a new Autoconf -# release and drop the old call support. -AC_DEFUN([AM_INIT_AUTOMAKE], -[AC_PREREQ([2.62])dnl -dnl Autoconf wants to disallow AM_ names. We explicitly allow -dnl the ones we care about. -m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl -AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl -AC_REQUIRE([AC_PROG_INSTALL])dnl -if test "`cd $srcdir && pwd`" != "`pwd`"; then - # Use -I$(srcdir) only when $(srcdir) != ., so that make's output - # is not polluted with repeated "-I." - AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl - # test to see if srcdir already configured - if test -f $srcdir/config.status; then - AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) - fi -fi - -# test whether we have cygpath -if test -z "$CYGPATH_W"; then - if (cygpath --version) >/dev/null 2>/dev/null; then - CYGPATH_W='cygpath -w' - else - CYGPATH_W=echo - fi -fi -AC_SUBST([CYGPATH_W]) - -# Define the identity of the package. -dnl Distinguish between old-style and new-style calls. -m4_ifval([$2], -[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl - AC_SUBST([PACKAGE], [$1])dnl - AC_SUBST([VERSION], [$2])], -[_AM_SET_OPTIONS([$1])dnl -dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. -m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,, - [m4_fatal([AC_INIT should be called with package and version arguments])])dnl - AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl - AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl - -_AM_IF_OPTION([no-define],, -[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) - AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl - -# Some tools Automake needs. -AC_REQUIRE([AM_SANITY_CHECK])dnl -AC_REQUIRE([AC_ARG_PROGRAM])dnl -AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) -AM_MISSING_PROG(AUTOCONF, autoconf) -AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) -AM_MISSING_PROG(AUTOHEADER, autoheader) -AM_MISSING_PROG(MAKEINFO, makeinfo) -AC_REQUIRE([AM_PROG_INSTALL_SH])dnl -AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl -AC_REQUIRE([AM_PROG_MKDIR_P])dnl -# We need awk for the "check" target. The system "awk" is bad on -# some platforms. -AC_REQUIRE([AC_PROG_AWK])dnl -AC_REQUIRE([AC_PROG_MAKE_SET])dnl -AC_REQUIRE([AM_SET_LEADING_DOT])dnl -_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], - [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], - [_AM_PROG_TAR([v7])])]) -_AM_IF_OPTION([no-dependencies],, -[AC_PROVIDE_IFELSE([AC_PROG_CC], - [_AM_DEPENDENCIES(CC)], - [define([AC_PROG_CC], - defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl -AC_PROVIDE_IFELSE([AC_PROG_CXX], - [_AM_DEPENDENCIES(CXX)], - [define([AC_PROG_CXX], - defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl -AC_PROVIDE_IFELSE([AC_PROG_OBJC], - [_AM_DEPENDENCIES(OBJC)], - [define([AC_PROG_OBJC], - defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl -]) -_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl -dnl The `parallel-tests' driver may need to know about EXEEXT, so add the -dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This macro -dnl is hooked onto _AC_COMPILER_EXEEXT early, see below. -AC_CONFIG_COMMANDS_PRE(dnl -[m4_provide_if([_AM_COMPILER_EXEEXT], - [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl -]) - -dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion. Do not -dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further -dnl mangled by Autoconf and run in a shell conditional statement. -m4_define([_AC_COMPILER_EXEEXT], -m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])]) - - -# When config.status generates a header, we must update the stamp-h file. -# This file resides in the same directory as the config header -# that is generated. The stamp files are numbered to have different names. - -# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the -# loop where config.status creates the headers, so we can generate -# our stamp files there. -AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], -[# Compute $1's index in $config_headers. -_am_arg=$1 -_am_stamp_count=1 -for _am_header in $config_headers :; do - case $_am_header in - $_am_arg | $_am_arg:* ) - break ;; - * ) - _am_stamp_count=`expr $_am_stamp_count + 1` ;; - esac -done -echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) - -# Copyright (C) 2001, 2003, 2005, 2008, 2011 Free Software Foundation, -# Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 1 - -# AM_PROG_INSTALL_SH -# ------------------ -# Define $install_sh. -AC_DEFUN([AM_PROG_INSTALL_SH], -[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -if test x"${install_sh}" != xset; then - case $am_aux_dir in - *\ * | *\ *) - install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; - *) - install_sh="\${SHELL} $am_aux_dir/install-sh" - esac -fi -AC_SUBST(install_sh)]) - -# Copyright (C) 2003, 2005 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 2 - -# Check whether the underlying file-system supports filenames -# with a leading dot. For instance MS-DOS doesn't. -AC_DEFUN([AM_SET_LEADING_DOT], -[rm -rf .tst 2>/dev/null -mkdir .tst 2>/dev/null -if test -d .tst; then - am__leading_dot=. -else - am__leading_dot=_ -fi -rmdir .tst 2>/dev/null -AC_SUBST([am__leading_dot])]) - -# Add --enable-maintainer-mode option to configure. -*- Autoconf -*- -# From Jim Meyering - -# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005, 2008, -# 2011 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 5 - -# AM_MAINTAINER_MODE([DEFAULT-MODE]) -# ---------------------------------- -# Control maintainer-specific portions of Makefiles. -# Default is to disable them, unless `enable' is passed literally. -# For symmetry, `disable' may be passed as well. Anyway, the user -# can override the default with the --enable/--disable switch. -AC_DEFUN([AM_MAINTAINER_MODE], -[m4_case(m4_default([$1], [disable]), - [enable], [m4_define([am_maintainer_other], [disable])], - [disable], [m4_define([am_maintainer_other], [enable])], - [m4_define([am_maintainer_other], [enable]) - m4_warn([syntax], [unexpected argument to AM@&t@_MAINTAINER_MODE: $1])]) -AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) - dnl maintainer-mode's default is 'disable' unless 'enable' is passed - AC_ARG_ENABLE([maintainer-mode], -[ --][am_maintainer_other][-maintainer-mode am_maintainer_other make rules and dependencies not useful - (and sometimes confusing) to the casual installer], - [USE_MAINTAINER_MODE=$enableval], - [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes])) - AC_MSG_RESULT([$USE_MAINTAINER_MODE]) - AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes]) - MAINT=$MAINTAINER_MODE_TRUE - AC_SUBST([MAINT])dnl -] -) - -AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE]) - -# Check to see how 'make' treats includes. -*- Autoconf -*- - -# Copyright (C) 2001, 2002, 2003, 2005, 2009 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 4 - -# AM_MAKE_INCLUDE() -# ----------------- -# Check to see how make treats includes. -AC_DEFUN([AM_MAKE_INCLUDE], -[am_make=${MAKE-make} -cat > confinc << 'END' -am__doit: - @echo this is the am__doit target -.PHONY: am__doit -END -# If we don't find an include directive, just comment out the code. -AC_MSG_CHECKING([for style of include used by $am_make]) -am__include="#" -am__quote= -_am_result=none -# First try GNU make style include. -echo "include confinc" > confmf -# Ignore all kinds of additional output from `make'. -case `$am_make -s -f confmf 2> /dev/null` in #( -*the\ am__doit\ target*) - am__include=include - am__quote= - _am_result=GNU - ;; -esac -# Now try BSD make style include. -if test "$am__include" = "#"; then - echo '.include "confinc"' > confmf - case `$am_make -s -f confmf 2> /dev/null` in #( - *the\ am__doit\ target*) - am__include=.include - am__quote="\"" - _am_result=BSD - ;; - esac -fi -AC_SUBST([am__include]) -AC_SUBST([am__quote]) -AC_MSG_RESULT([$_am_result]) -rm -f confinc confmf -]) - -# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- - -# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008 -# Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 6 - -# AM_MISSING_PROG(NAME, PROGRAM) -# ------------------------------ -AC_DEFUN([AM_MISSING_PROG], -[AC_REQUIRE([AM_MISSING_HAS_RUN]) -$1=${$1-"${am_missing_run}$2"} -AC_SUBST($1)]) - - -# AM_MISSING_HAS_RUN -# ------------------ -# Define MISSING if not defined so far and test if it supports --run. -# If it does, set am_missing_run to use it, otherwise, to nothing. -AC_DEFUN([AM_MISSING_HAS_RUN], -[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -AC_REQUIRE_AUX_FILE([missing])dnl -if test x"${MISSING+set}" != xset; then - case $am_aux_dir in - *\ * | *\ *) - MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; - *) - MISSING="\${SHELL} $am_aux_dir/missing" ;; - esac -fi -# Use eval to expand $SHELL -if eval "$MISSING --run true"; then - am_missing_run="$MISSING --run " -else - am_missing_run= - AC_MSG_WARN([`missing' script is too old or missing]) -fi -]) - -# Copyright (C) 2003, 2004, 2005, 2006, 2011 Free Software Foundation, -# Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 1 - -# AM_PROG_MKDIR_P -# --------------- -# Check for `mkdir -p'. -AC_DEFUN([AM_PROG_MKDIR_P], -[AC_PREREQ([2.60])dnl -AC_REQUIRE([AC_PROG_MKDIR_P])dnl -dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P, -dnl while keeping a definition of mkdir_p for backward compatibility. -dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile. -dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of -dnl Makefile.ins that do not define MKDIR_P, so we do our own -dnl adjustment using top_builddir (which is defined more often than -dnl MKDIR_P). -AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl -case $mkdir_p in - [[\\/$]]* | ?:[[\\/]]*) ;; - */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; -esac -]) - -# Helper functions for option handling. -*- Autoconf -*- - -# Copyright (C) 2001, 2002, 2003, 2005, 2008, 2010 Free Software -# Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 5 - -# _AM_MANGLE_OPTION(NAME) -# ----------------------- -AC_DEFUN([_AM_MANGLE_OPTION], -[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) - -# _AM_SET_OPTION(NAME) -# -------------------- -# Set option NAME. Presently that only means defining a flag for this option. -AC_DEFUN([_AM_SET_OPTION], -[m4_define(_AM_MANGLE_OPTION([$1]), 1)]) - -# _AM_SET_OPTIONS(OPTIONS) -# ------------------------ -# OPTIONS is a space-separated list of Automake options. -AC_DEFUN([_AM_SET_OPTIONS], -[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) - -# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) -# ------------------------------------------- -# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. -AC_DEFUN([_AM_IF_OPTION], -[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) - -# Copyright (C) 1996, 1997, 1998, 2000, 2001, 2002, 2003, 2005, 2006 -# Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 5 - -AC_DEFUN([AM_C_PROTOTYPES], -[AC_REQUIRE([AC_C_PROTOTYPES]) -AC_DIAGNOSE([obsolete], - [$0: automatic de-ANSI-fication support is deprecated]) -if test "$ac_cv_prog_cc_stdc" != no; then - U= ANSI2KNR= -else - U=_ ANSI2KNR=./ansi2knr -fi -# Ensure some checks needed by ansi2knr itself. -AC_REQUIRE([AC_HEADER_STDC]) -AC_CHECK_HEADERS([string.h]) -AC_SUBST([U])dnl -AC_SUBST([ANSI2KNR])dnl -_AM_SUBST_NOTMAKE([ANSI2KNR])dnl -]) - -AU_DEFUN([fp_C_PROTOTYPES], [AM_C_PROTOTYPES]) - -# Check to make sure that the build environment is sane. -*- Autoconf -*- - -# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008 -# Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 5 - -# AM_SANITY_CHECK -# --------------- -AC_DEFUN([AM_SANITY_CHECK], -[AC_MSG_CHECKING([whether build environment is sane]) -# Just in case -sleep 1 -echo timestamp > conftest.file -# Reject unsafe characters in $srcdir or the absolute working directory -# name. Accept space and tab only in the latter. -am_lf=' -' -case `pwd` in - *[[\\\"\#\$\&\'\`$am_lf]]*) - AC_MSG_ERROR([unsafe absolute working directory name]);; -esac -case $srcdir in - *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*) - AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);; -esac - -# Do `set' in a subshell so we don't clobber the current shell's -# arguments. Must try -L first in case configure is actually a -# symlink; some systems play weird games with the mod time of symlinks -# (eg FreeBSD returns the mod time of the symlink's containing -# directory). -if ( - set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` - if test "$[*]" = "X"; then - # -L didn't work. - set X `ls -t "$srcdir/configure" conftest.file` - fi - rm -f conftest.file - if test "$[*]" != "X $srcdir/configure conftest.file" \ - && test "$[*]" != "X conftest.file $srcdir/configure"; then - - # If neither matched, then we have a broken ls. This can happen - # if, for instance, CONFIG_SHELL is bash and it inherits a - # broken ls alias from the environment. This has actually - # happened. Such a system could not be considered "sane". - AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken -alias in your environment]) - fi - - test "$[2]" = conftest.file - ) -then - # Ok. - : -else - AC_MSG_ERROR([newly created file is older than distributed files! -Check your system clock]) -fi -AC_MSG_RESULT(yes)]) - -# Copyright (C) 2009 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 1 - -# AM_SILENT_RULES([DEFAULT]) -# -------------------------- -# Enable less verbose build rules; with the default set to DEFAULT -# (`yes' being less verbose, `no' or empty being verbose). -AC_DEFUN([AM_SILENT_RULES], -[AC_ARG_ENABLE([silent-rules], -[ --enable-silent-rules less verbose build output (undo: `make V=1') - --disable-silent-rules verbose build output (undo: `make V=0')]) -case $enable_silent_rules in -yes) AM_DEFAULT_VERBOSITY=0;; -no) AM_DEFAULT_VERBOSITY=1;; -*) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);; -esac -AC_SUBST([AM_DEFAULT_VERBOSITY])dnl -AM_BACKSLASH='\' -AC_SUBST([AM_BACKSLASH])dnl -_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl -]) - -# Copyright (C) 2001, 2003, 2005, 2011 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 1 - -# AM_PROG_INSTALL_STRIP -# --------------------- -# One issue with vendor `install' (even GNU) is that you can't -# specify the program used to strip binaries. This is especially -# annoying in cross-compiling environments, where the build's strip -# is unlikely to handle the host's binaries. -# Fortunately install-sh will honor a STRIPPROG variable, so we -# always use install-sh in `make install-strip', and initialize -# STRIPPROG with the value of the STRIP variable (set by the user). -AC_DEFUN([AM_PROG_INSTALL_STRIP], -[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl -# Installed binaries are usually stripped using `strip' when the user -# run `make install-strip'. However `strip' might not be the right -# tool to use in cross-compilation environments, therefore Automake -# will honor the `STRIP' environment variable to overrule this program. -dnl Don't test for $cross_compiling = yes, because it might be `maybe'. -if test "$cross_compiling" != no; then - AC_CHECK_TOOL([STRIP], [strip], :) -fi -INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" -AC_SUBST([INSTALL_STRIP_PROGRAM])]) - -# Copyright (C) 2006, 2008, 2010 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 3 - -# _AM_SUBST_NOTMAKE(VARIABLE) -# --------------------------- -# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. -# This macro is traced by Automake. -AC_DEFUN([_AM_SUBST_NOTMAKE]) - -# AM_SUBST_NOTMAKE(VARIABLE) -# -------------------------- -# Public sister of _AM_SUBST_NOTMAKE. -AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)]) - -# Check how to create a tarball. -*- Autoconf -*- - -# Copyright (C) 2004, 2005 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 2 - -# _AM_PROG_TAR(FORMAT) -# -------------------- -# Check how to create a tarball in format FORMAT. -# FORMAT should be one of `v7', `ustar', or `pax'. -# -# Substitute a variable $(am__tar) that is a command -# writing to stdout a FORMAT-tarball containing the directory -# $tardir. -# tardir=directory && $(am__tar) > result.tar -# -# Substitute a variable $(am__untar) that extract such -# a tarball read from stdin. -# $(am__untar) < result.tar -AC_DEFUN([_AM_PROG_TAR], -[# Always define AMTAR for backward compatibility. -AM_MISSING_PROG([AMTAR], [tar]) -m4_if([$1], [v7], - [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'], - [m4_case([$1], [ustar],, [pax],, - [m4_fatal([Unknown tar format])]) -AC_MSG_CHECKING([how to create a $1 tar archive]) -# Loop over all known methods to create a tar archive until one works. -_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' -_am_tools=${am_cv_prog_tar_$1-$_am_tools} -# Do not fold the above two line into one, because Tru64 sh and -# Solaris sh will not grok spaces in the rhs of `-'. -for _am_tool in $_am_tools -do - case $_am_tool in - gnutar) - for _am_tar in tar gnutar gtar; - do - AM_RUN_LOG([$_am_tar --version]) && break - done - am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' - am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' - am__untar="$_am_tar -xf -" - ;; - plaintar) - # Must skip GNU tar: if it does not support --format= it doesn't create - # ustar tarball either. - (tar --version) >/dev/null 2>&1 && continue - am__tar='tar chf - "$$tardir"' - am__tar_='tar chf - "$tardir"' - am__untar='tar xf -' - ;; - pax) - am__tar='pax -L -x $1 -w "$$tardir"' - am__tar_='pax -L -x $1 -w "$tardir"' - am__untar='pax -r' - ;; - cpio) - am__tar='find "$$tardir" -print | cpio -o -H $1 -L' - am__tar_='find "$tardir" -print | cpio -o -H $1 -L' - am__untar='cpio -i -H $1 -d' - ;; - none) - am__tar=false - am__tar_=false - am__untar=false - ;; - esac - - # If the value was cached, stop now. We just wanted to have am__tar - # and am__untar set. - test -n "${am_cv_prog_tar_$1}" && break - - # tar/untar a dummy directory, and stop if the command works - rm -rf conftest.dir - mkdir conftest.dir - echo GrepMe > conftest.dir/file - AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) - rm -rf conftest.dir - if test -s conftest.tar; then - AM_RUN_LOG([$am__untar /dev/null 2>&1 && break - fi -done -rm -rf conftest.dir - -AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) -AC_MSG_RESULT([$am_cv_prog_tar_$1])]) -AC_SUBST([am__tar]) -AC_SUBST([am__untar]) -]) # _AM_PROG_TAR - diff --git a/jpeg/afiles b/jpeg/afiles deleted file mode 100755 index a0e6ed4..0000000 --- a/jpeg/afiles +++ /dev/null @@ -1,185 +0,0 @@ -afiles -Jamfile -Makefile.am -Makefile.in -README -aclocal.m4 -ansi2knr.1 -ansi2knr.c -cderror.h -cdjpeg.c -cdjpeg.h -change.log -cjpeg.1 -cjpeg.c -ckconfig.c -coderules.txt -config.guess -config.sub -configure -configure.ac -depcomp -djpeg.1 -djpeg.c -example.c -filelist.txt -install-sh -install.txt -jaricom.c -jcapimin.c -jcapistd.c -jcarith.c -jccoefct.c -jccolor.c -jcdctmgr.c -jchuff.c -jcinit.c -jcmainct.c -jcmarker.c -jcmaster.c -jcomapi.c -jconfig.bcc -jconfig.cfg -jconfig.dj -jconfig.mac -jconfig.manx -jconfig.mc6 -jconfig.sas -jconfig.st -jconfig.txt -jconfig.vc -jconfig.vms -jconfig.wat -jcparam.c -jcprepct.c -jcsample.c -jctrans.c -jdapimin.c -jdapistd.c -jdarith.c -jdatadst.c -jdatasrc.c -jdcoefct.c -jdcolor.c -jdct.h -jddctmgr.c -jdhuff.c -jdinput.c -jdmainct.c -jdmarker.c -jdmaster.c -jdmerge.c -jdosaobj.txt -jdpostct.c -jdsample.c -jdtrans.c -jerror.c -jerror.h -jfdctflt.c -jfdctfst.c -jfdctint.c -jidctflt.c -jidctfst.c -jidctint.c -jinclude.h -jmemansi.c -jmemdos.c -jmemdosa.asm -jmemmac.c -jmemmgr.c -jmemname.c -jmemnobs.c -jmemsys.h -jmorecfg.h -jpegint.h -jpeglib.h -jpegsr8d.zip -jpegtran.1 -jpegtran.c -jquant1.c -jquant2.c -jutils.c -jversion.h -libjpeg.map -libjpeg.txt -ltmain.sh -makcjpeg.st -makdjpeg.st -makeadsw.vc6 -makeasln.v10 -makecdep.vc6 -makecdsp.vc6 -makecfil.v10 -makecmak.vc6 -makecvcx.v10 -makeddep.vc6 -makeddsp.vc6 -makedfil.v10 -makedmak.vc6 -makedvcx.v10 -makefile.ansi -makefile.bcc -makefile.dj -makefile.manx -makefile.mc6 -makefile.mms -makefile.sas -makefile.unix -makefile.vc -makefile.vms -makefile.wat -makejdep.vc6 -makejdsp.vc6 -makejdsw.vc6 -makejfil.v10 -makejmak.vc6 -makejsln.v10 -makejvcx.v10 -makeproj.mac -makerdep.vc6 -makerdsp.vc6 -makerfil.v10 -makermak.vc6 -makervcx.v10 -maketdep.vc6 -maketdsp.vc6 -maketfil.v10 -maketmak.vc6 -maketvcx.v10 -makewdep.vc6 -makewdsp.vc6 -makewfil.v10 -makewmak.vc6 -makewvcx.v10 -makljpeg.st -maktjpeg.st -makvms.opt -missing -rdbmp.c -rdcolmap.c -rdgif.c -rdjpgcom.1 -rdjpgcom.c -rdppm.c -rdrle.c -rdswitch.c -rdtarga.c -readme.dos -structure.txt -testimg.bmp -testimg.jpg -testimg.ppm -testimgp.jpg -testorig.jpg -testprog.jpg -transupp.c -transupp.h -usage.txt -wizard.txt -wrbmp.c -wrgif.c -wrjpgcom.1 -wrjpgcom.c -wrppm.c -wrrle.c -wrtarga.c diff --git a/jpeg/ansi2knr.1 b/jpeg/ansi2knr.1 deleted file mode 100755 index f9ee5a6..0000000 --- a/jpeg/ansi2knr.1 +++ /dev/null @@ -1,36 +0,0 @@ -.TH ANSI2KNR 1 "19 Jan 1996" -.SH NAME -ansi2knr \- convert ANSI C to Kernighan & Ritchie C -.SH SYNOPSIS -.I ansi2knr -[--varargs] input_file [output_file] -.SH DESCRIPTION -If no output_file is supplied, output goes to stdout. -.br -There are no error messages. -.sp -.I ansi2knr -recognizes function definitions by seeing a non-keyword identifier at the left -margin, followed by a left parenthesis, with a right parenthesis as the last -character on the line, and with a left brace as the first token on the -following line (ignoring possible intervening comments). It will recognize a -multi-line header provided that no intervening line ends with a left or right -brace or a semicolon. These algorithms ignore whitespace and comments, except -that the function name must be the first thing on the line. -.sp -The following constructs will confuse it: -.br - - Any other construct that starts at the left margin and follows the -above syntax (such as a macro or function call). -.br - - Some macros that tinker with the syntax of the function header. -.sp -The --varargs switch is obsolete, and is recognized only for -backwards compatibility. The present version of -.I ansi2knr -will always attempt to convert a ... argument to va_alist and va_dcl. -.SH AUTHOR -L. Peter Deutsch wrote the original ansi2knr and -continues to maintain the current version; most of the code in the current -version is his work. ansi2knr also includes contributions by Francois -Pinard and Jim Avera . diff --git a/jpeg/ansi2knr.c b/jpeg/ansi2knr.c deleted file mode 100755 index e84c210..0000000 --- a/jpeg/ansi2knr.c +++ /dev/null @@ -1,739 +0,0 @@ -/* Copyright (C) 1989, 2000 Aladdin Enterprises. All rights reserved. */ - -/*$Id: ansi2knr.c,v 1.14 2003/09/06 05:36:56 eggert Exp $*/ -/* Convert ANSI C function definitions to K&R ("traditional C") syntax */ - -/* -ansi2knr is distributed in the hope that it will be useful, but WITHOUT ANY -WARRANTY. No author or distributor accepts responsibility to anyone for the -consequences of using it or for whether it serves any particular purpose or -works at all, unless he says so in writing. Refer to the GNU General Public -License (the "GPL") for full details. - -Everyone is granted permission to copy, modify and redistribute ansi2knr, -but only under the conditions described in the GPL. A copy of this license -is supposed to have been given to you along with ansi2knr so you can know -your rights and responsibilities. It should be in a file named COPYLEFT, -or, if there is no file named COPYLEFT, a file named COPYING. Among other -things, the copyright notice and this notice must be preserved on all -copies. - -We explicitly state here what we believe is already implied by the GPL: if -the ansi2knr program is distributed as a separate set of sources and a -separate executable file which are aggregated on a storage medium together -with another program, this in itself does not bring the other program under -the GPL, nor does the mere fact that such a program or the procedures for -constructing it invoke the ansi2knr executable bring any other part of the -program under the GPL. -*/ - -/* - * Usage: - ansi2knr [--filename FILENAME] [INPUT_FILE [OUTPUT_FILE]] - * --filename provides the file name for the #line directive in the output, - * overriding input_file (if present). - * If no input_file is supplied, input is read from stdin. - * If no output_file is supplied, output goes to stdout. - * There are no error messages. - * - * ansi2knr recognizes function definitions by seeing a non-keyword - * identifier at the left margin, followed by a left parenthesis, with a - * right parenthesis as the last character on the line, and with a left - * brace as the first token on the following line (ignoring possible - * intervening comments and/or preprocessor directives), except that a line - * consisting of only - * identifier1(identifier2) - * will not be considered a function definition unless identifier2 is - * the word "void", and a line consisting of - * identifier1(identifier2, <>) - * will not be considered a function definition. - * ansi2knr will recognize a multi-line header provided that no intervening - * line ends with a left or right brace or a semicolon. These algorithms - * ignore whitespace, comments, and preprocessor directives, except that - * the function name must be the first thing on the line. The following - * constructs will confuse it: - * - Any other construct that starts at the left margin and - * follows the above syntax (such as a macro or function call). - * - Some macros that tinker with the syntax of function headers. - */ - -/* - * The original and principal author of ansi2knr is L. Peter Deutsch - * . Other authors are noted in the change history - * that follows (in reverse chronological order): - - lpd 2000-04-12 backs out Eggert's changes because of bugs: - - concatlits didn't declare the type of its bufend argument; - - concatlits didn't recognize when it was inside a comment; - - scanstring could scan backward past the beginning of the string; when - - the check for \ + newline in scanstring was unnecessary. - - 2000-03-05 Paul Eggert - - Add support for concatenated string literals. - * ansi2knr.c (concatlits): New decl. - (main): Invoke concatlits to concatenate string literals. - (scanstring): Handle backslash-newline correctly. Work with - character constants. Fix bug when scanning backwards through - backslash-quote. Check for unterminated strings. - (convert1): Parse character constants, too. - (appendline, concatlits): New functions. - * ansi2knr.1: Document this. - - lpd 1999-08-17 added code to allow preprocessor directives - wherever comments are allowed - lpd 1999-04-12 added minor fixes from Pavel Roskin - for clean compilation with - gcc -W -Wall - lpd 1999-03-22 added hack to recognize lines consisting of - identifier1(identifier2, xxx) as *not* being procedures - lpd 1999-02-03 made indentation of preprocessor commands consistent - lpd 1999-01-28 fixed two bugs: a '/' in an argument list caused an - endless loop; quoted strings within an argument list - confused the parser - lpd 1999-01-24 added a check for write errors on the output, - suggested by Jim Meyering - lpd 1998-11-09 added further hack to recognize identifier(void) - as being a procedure - lpd 1998-10-23 added hack to recognize lines consisting of - identifier1(identifier2) as *not* being procedures - lpd 1997-12-08 made input_file optional; only closes input and/or - output file if not stdin or stdout respectively; prints - usage message on stderr rather than stdout; adds - --filename switch (changes suggested by - ) - lpd 1996-01-21 added code to cope with not HAVE_CONFIG_H and with - compilers that don't understand void, as suggested by - Tom Lane - lpd 1996-01-15 changed to require that the first non-comment token - on the line following a function header be a left brace, - to reduce sensitivity to macros, as suggested by Tom Lane - - lpd 1995-06-22 removed #ifndefs whose sole purpose was to define - undefined preprocessor symbols as 0; changed all #ifdefs - for configuration symbols to #ifs - lpd 1995-04-05 changed copyright notice to make it clear that - including ansi2knr in a program does not bring the entire - program under the GPL - lpd 1994-12-18 added conditionals for systems where ctype macros - don't handle 8-bit characters properly, suggested by - Francois Pinard ; - removed --varargs switch (this is now the default) - lpd 1994-10-10 removed CONFIG_BROKETS conditional - lpd 1994-07-16 added some conditionals to help GNU `configure', - suggested by Francois Pinard ; - properly erase prototype args in function parameters, - contributed by Jim Avera ; - correct error in writeblanks (it shouldn't erase EOLs) - lpd 1989-xx-xx original version - */ - -/* Most of the conditionals here are to make ansi2knr work with */ -/* or without the GNU configure machinery. */ - -#if HAVE_CONFIG_H -# include -#endif - -#include -#include - -#if HAVE_CONFIG_H - -/* - For properly autoconfiguring ansi2knr, use AC_CONFIG_HEADER(config.h). - This will define HAVE_CONFIG_H and so, activate the following lines. - */ - -# if STDC_HEADERS || HAVE_STRING_H -# include -# else -# include -# endif - -#else /* not HAVE_CONFIG_H */ - -/* Otherwise do it the hard way */ - -# ifdef BSD -# include -# else -# ifdef VMS - extern int strlen(), strncmp(); -# else -# include -# endif -# endif - -#endif /* not HAVE_CONFIG_H */ - -#if STDC_HEADERS -# include -#else -/* - malloc and free should be declared in stdlib.h, - but if you've got a K&R compiler, they probably aren't. - */ -# ifdef MSDOS -# include -# else -# ifdef VMS - extern char *malloc(); - extern void free(); -# else - extern char *malloc(); - extern int free(); -# endif -# endif - -#endif - -/* Define NULL (for *very* old compilers). */ -#ifndef NULL -# define NULL (0) -#endif - -/* - * The ctype macros don't always handle 8-bit characters correctly. - * Compensate for this here. - */ -#ifdef isascii -# undef HAVE_ISASCII /* just in case */ -# define HAVE_ISASCII 1 -#else -#endif -#if STDC_HEADERS || !HAVE_ISASCII -# define is_ascii(c) 1 -#else -# define is_ascii(c) isascii(c) -#endif - -#define is_space(c) (is_ascii(c) && isspace(c)) -#define is_alpha(c) (is_ascii(c) && isalpha(c)) -#define is_alnum(c) (is_ascii(c) && isalnum(c)) - -/* Scanning macros */ -#define isidchar(ch) (is_alnum(ch) || (ch) == '_') -#define isidfirstchar(ch) (is_alpha(ch) || (ch) == '_') - -/* Forward references */ -char *ppdirforward(); -char *ppdirbackward(); -char *skipspace(); -char *scanstring(); -int writeblanks(); -int test1(); -int convert1(); - -/* The main program */ -int -main(argc, argv) - int argc; - char *argv[]; -{ FILE *in = stdin; - FILE *out = stdout; - char *filename = 0; - char *program_name = argv[0]; - char *output_name = 0; -#define bufsize 5000 /* arbitrary size */ - char *buf; - char *line; - char *more; - char *usage = - "Usage: ansi2knr [--filename FILENAME] [INPUT_FILE [OUTPUT_FILE]]\n"; - /* - * In previous versions, ansi2knr recognized a --varargs switch. - * If this switch was supplied, ansi2knr would attempt to convert - * a ... argument to va_alist and va_dcl; if this switch was not - * supplied, ansi2knr would simply drop any such arguments. - * Now, ansi2knr always does this conversion, and we only - * check for this switch for backward compatibility. - */ - int convert_varargs = 1; - int output_error; - - while ( argc > 1 && argv[1][0] == '-' ) { - if ( !strcmp(argv[1], "--varargs") ) { - convert_varargs = 1; - argc--; - argv++; - continue; - } - if ( !strcmp(argv[1], "--filename") && argc > 2 ) { - filename = argv[2]; - argc -= 2; - argv += 2; - continue; - } - fprintf(stderr, "%s: Unrecognized switch: %s\n", program_name, - argv[1]); - fprintf(stderr, usage); - exit(1); - } - switch ( argc ) - { - default: - fprintf(stderr, usage); - exit(0); - case 3: - output_name = argv[2]; - out = fopen(output_name, "w"); - if ( out == NULL ) { - fprintf(stderr, "%s: Cannot open output file %s\n", - program_name, output_name); - exit(1); - } - /* falls through */ - case 2: - in = fopen(argv[1], "r"); - if ( in == NULL ) { - fprintf(stderr, "%s: Cannot open input file %s\n", - program_name, argv[1]); - exit(1); - } - if ( filename == 0 ) - filename = argv[1]; - /* falls through */ - case 1: - break; - } - if ( filename ) - fprintf(out, "#line 1 \"%s\"\n", filename); - buf = malloc(bufsize); - if ( buf == NULL ) - { - fprintf(stderr, "Unable to allocate read buffer!\n"); - exit(1); - } - line = buf; - while ( fgets(line, (unsigned)(buf + bufsize - line), in) != NULL ) - { -test: line += strlen(line); - switch ( test1(buf) ) - { - case 2: /* a function header */ - convert1(buf, out, 1, convert_varargs); - break; - case 1: /* a function */ - /* Check for a { at the start of the next line. */ - more = ++line; -f: if ( line >= buf + (bufsize - 1) ) /* overflow check */ - goto wl; - if ( fgets(line, (unsigned)(buf + bufsize - line), in) == NULL ) - goto wl; - switch ( *skipspace(ppdirforward(more), 1) ) - { - case '{': - /* Definitely a function header. */ - convert1(buf, out, 0, convert_varargs); - fputs(more, out); - break; - case 0: - /* The next line was blank or a comment: */ - /* keep scanning for a non-comment. */ - line += strlen(line); - goto f; - default: - /* buf isn't a function header, but */ - /* more might be. */ - fputs(buf, out); - strcpy(buf, more); - line = buf; - goto test; - } - break; - case -1: /* maybe the start of a function */ - if ( line != buf + (bufsize - 1) ) /* overflow check */ - continue; - /* falls through */ - default: /* not a function */ -wl: fputs(buf, out); - break; - } - line = buf; - } - if ( line != buf ) - fputs(buf, out); - free(buf); - if ( output_name ) { - output_error = ferror(out); - output_error |= fclose(out); - } else { /* out == stdout */ - fflush(out); - output_error = ferror(out); - } - if ( output_error ) { - fprintf(stderr, "%s: error writing to %s\n", program_name, - (output_name ? output_name : "stdout")); - exit(1); - } - if ( in != stdin ) - fclose(in); - return 0; -} - -/* - * Skip forward or backward over one or more preprocessor directives. - */ -char * -ppdirforward(p) - char *p; -{ - for (; *p == '#'; ++p) { - for (; *p != '\r' && *p != '\n'; ++p) - if (*p == 0) - return p; - if (*p == '\r' && p[1] == '\n') - ++p; - } - return p; -} -char * -ppdirbackward(p, limit) - char *p; - char *limit; -{ - char *np = p; - - for (;; p = --np) { - if (*np == '\n' && np[-1] == '\r') - --np; - for (; np > limit && np[-1] != '\r' && np[-1] != '\n'; --np) - if (np[-1] == 0) - return np; - if (*np != '#') - return p; - } -} - -/* - * Skip over whitespace, comments, and preprocessor directives, - * in either direction. - */ -char * -skipspace(p, dir) - char *p; - int dir; /* 1 for forward, -1 for backward */ -{ - for ( ; ; ) { - while ( is_space(*p) ) - p += dir; - if ( !(*p == '/' && p[dir] == '*') ) - break; - p += dir; p += dir; - while ( !(*p == '*' && p[dir] == '/') ) { - if ( *p == 0 ) - return p; /* multi-line comment?? */ - p += dir; - } - p += dir; p += dir; - } - return p; -} - -/* Scan over a quoted string, in either direction. */ -char * -scanstring(p, dir) - char *p; - int dir; -{ - for (p += dir; ; p += dir) - if (*p == '"' && p[-dir] != '\\') - return p + dir; -} - -/* - * Write blanks over part of a string. - * Don't overwrite end-of-line characters. - */ -int -writeblanks(start, end) - char *start; - char *end; -{ char *p; - for ( p = start; p < end; p++ ) - if ( *p != '\r' && *p != '\n' ) - *p = ' '; - return 0; -} - -/* - * Test whether the string in buf is a function definition. - * The string may contain and/or end with a newline. - * Return as follows: - * 0 - definitely not a function definition; - * 1 - definitely a function definition; - * 2 - definitely a function prototype (NOT USED); - * -1 - may be the beginning of a function definition, - * append another line and look again. - * The reason we don't attempt to convert function prototypes is that - * Ghostscript's declaration-generating macros look too much like - * prototypes, and confuse the algorithms. - */ -int -test1(buf) - char *buf; -{ char *p = buf; - char *bend; - char *endfn; - int contin; - - if ( !isidfirstchar(*p) ) - return 0; /* no name at left margin */ - bend = skipspace(ppdirbackward(buf + strlen(buf) - 1, buf), -1); - switch ( *bend ) - { - case ';': contin = 0 /*2*/; break; - case ')': contin = 1; break; - case '{': return 0; /* not a function */ - case '}': return 0; /* not a function */ - default: contin = -1; - } - while ( isidchar(*p) ) - p++; - endfn = p; - p = skipspace(p, 1); - if ( *p++ != '(' ) - return 0; /* not a function */ - p = skipspace(p, 1); - if ( *p == ')' ) - return 0; /* no parameters */ - /* Check that the apparent function name isn't a keyword. */ - /* We only need to check for keywords that could be followed */ - /* by a left parenthesis (which, unfortunately, is most of them). */ - { static char *words[] = - { "asm", "auto", "case", "char", "const", "double", - "extern", "float", "for", "if", "int", "long", - "register", "return", "short", "signed", "sizeof", - "static", "switch", "typedef", "unsigned", - "void", "volatile", "while", 0 - }; - char **key = words; - char *kp; - unsigned len = endfn - buf; - - while ( (kp = *key) != 0 ) - { if ( strlen(kp) == len && !strncmp(kp, buf, len) ) - return 0; /* name is a keyword */ - key++; - } - } - { - char *id = p; - int len; - /* - * Check for identifier1(identifier2) and not - * identifier1(void), or identifier1(identifier2, xxxx). - */ - - while ( isidchar(*p) ) - p++; - len = p - id; - p = skipspace(p, 1); - if (*p == ',' || - (*p == ')' && (len != 4 || strncmp(id, "void", 4))) - ) - return 0; /* not a function */ - } - /* - * If the last significant character was a ), we need to count - * parentheses, because it might be part of a formal parameter - * that is a procedure. - */ - if (contin > 0) { - int level = 0; - - for (p = skipspace(buf, 1); *p; p = skipspace(p + 1, 1)) - level += (*p == '(' ? 1 : *p == ')' ? -1 : 0); - if (level > 0) - contin = -1; - } - return contin; -} - -/* Convert a recognized function definition or header to K&R syntax. */ -int -convert1(buf, out, header, convert_varargs) - char *buf; - FILE *out; - int header; /* Boolean */ - int convert_varargs; /* Boolean */ -{ char *endfn; - char *p; - /* - * The breaks table contains pointers to the beginning and end - * of each argument. - */ - char **breaks; - unsigned num_breaks = 2; /* for testing */ - char **btop; - char **bp; - char **ap; - char *vararg = 0; - - /* Pre-ANSI implementations don't agree on whether strchr */ - /* is called strchr or index, so we open-code it here. */ - for ( endfn = buf; *(endfn++) != '('; ) - ; -top: p = endfn; - breaks = (char **)malloc(sizeof(char *) * num_breaks * 2); - if ( breaks == NULL ) - { /* Couldn't allocate break table, give up */ - fprintf(stderr, "Unable to allocate break table!\n"); - fputs(buf, out); - return -1; - } - btop = breaks + num_breaks * 2 - 2; - bp = breaks; - /* Parse the argument list */ - do - { int level = 0; - char *lp = NULL; - char *rp = NULL; - char *end = NULL; - - if ( bp >= btop ) - { /* Filled up break table. */ - /* Allocate a bigger one and start over. */ - free((char *)breaks); - num_breaks <<= 1; - goto top; - } - *bp++ = p; - /* Find the end of the argument */ - for ( ; end == NULL; p++ ) - { switch(*p) - { - case ',': - if ( !level ) end = p; - break; - case '(': - if ( !level ) lp = p; - level++; - break; - case ')': - if ( --level < 0 ) end = p; - else rp = p; - break; - case '/': - if (p[1] == '*') - p = skipspace(p, 1) - 1; - break; - case '"': - p = scanstring(p, 1) - 1; - break; - default: - ; - } - } - /* Erase any embedded prototype parameters. */ - if ( lp && rp ) - writeblanks(lp + 1, rp); - p--; /* back up over terminator */ - /* Find the name being declared. */ - /* This is complicated because of procedure and */ - /* array modifiers. */ - for ( ; ; ) - { p = skipspace(p - 1, -1); - switch ( *p ) - { - case ']': /* skip array dimension(s) */ - case ')': /* skip procedure args OR name */ - { int level = 1; - while ( level ) - switch ( *--p ) - { - case ']': case ')': - level++; - break; - case '[': case '(': - level--; - break; - case '/': - if (p > buf && p[-1] == '*') - p = skipspace(p, -1) + 1; - break; - case '"': - p = scanstring(p, -1) + 1; - break; - default: ; - } - } - if ( *p == '(' && *skipspace(p + 1, 1) == '*' ) - { /* We found the name being declared */ - while ( !isidfirstchar(*p) ) - p = skipspace(p, 1) + 1; - goto found; - } - break; - default: - goto found; - } - } -found: if ( *p == '.' && p[-1] == '.' && p[-2] == '.' ) - { if ( convert_varargs ) - { *bp++ = "va_alist"; - vararg = p-2; - } - else - { p++; - if ( bp == breaks + 1 ) /* sole argument */ - writeblanks(breaks[0], p); - else - writeblanks(bp[-1] - 1, p); - bp--; - } - } - else - { while ( isidchar(*p) ) p--; - *bp++ = p+1; - } - p = end; - } - while ( *p++ == ',' ); - *bp = p; - /* Make a special check for 'void' arglist */ - if ( bp == breaks+2 ) - { p = skipspace(breaks[0], 1); - if ( !strncmp(p, "void", 4) ) - { p = skipspace(p+4, 1); - if ( p == breaks[2] - 1 ) - { bp = breaks; /* yup, pretend arglist is empty */ - writeblanks(breaks[0], p + 1); - } - } - } - /* Put out the function name and left parenthesis. */ - p = buf; - while ( p != endfn ) putc(*p, out), p++; - /* Put out the declaration. */ - if ( header ) - { fputs(");", out); - for ( p = breaks[0]; *p; p++ ) - if ( *p == '\r' || *p == '\n' ) - putc(*p, out); - } - else - { for ( ap = breaks+1; ap < bp; ap += 2 ) - { p = *ap; - while ( isidchar(*p) ) - putc(*p, out), p++; - if ( ap < bp - 1 ) - fputs(", ", out); - } - fputs(") ", out); - /* Put out the argument declarations */ - for ( ap = breaks+2; ap <= bp; ap += 2 ) - (*ap)[-1] = ';'; - if ( vararg != 0 ) - { *vararg = 0; - fputs(breaks[0], out); /* any prior args */ - fputs("va_dcl", out); /* the final arg */ - fputs(bp[0], out); - } - else - fputs(breaks[0], out); - } - free((char *)breaks); - return 0; -} diff --git a/jpeg/cderror.h b/jpeg/cderror.h deleted file mode 100755 index e19c475..0000000 --- a/jpeg/cderror.h +++ /dev/null @@ -1,134 +0,0 @@ -/* - * cderror.h - * - * Copyright (C) 1994-1997, Thomas G. Lane. - * Modified 2009 by Guido Vollbeding. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file defines the error and message codes for the cjpeg/djpeg - * applications. These strings are not needed as part of the JPEG library - * proper. - * Edit this file to add new codes, or to translate the message strings to - * some other language. - */ - -/* - * To define the enum list of message codes, include this file without - * defining macro JMESSAGE. To create a message string table, include it - * again with a suitable JMESSAGE definition (see jerror.c for an example). - */ -#ifndef JMESSAGE -#ifndef CDERROR_H -#define CDERROR_H -/* First time through, define the enum list */ -#define JMAKE_ENUM_LIST -#else -/* Repeated inclusions of this file are no-ops unless JMESSAGE is defined */ -#define JMESSAGE(code,string) -#endif /* CDERROR_H */ -#endif /* JMESSAGE */ - -#ifdef JMAKE_ENUM_LIST - -typedef enum { - -#define JMESSAGE(code,string) code , - -#endif /* JMAKE_ENUM_LIST */ - -JMESSAGE(JMSG_FIRSTADDONCODE=1000, NULL) /* Must be first entry! */ - -#ifdef BMP_SUPPORTED -JMESSAGE(JERR_BMP_BADCMAP, "Unsupported BMP colormap format") -JMESSAGE(JERR_BMP_BADDEPTH, "Only 8- and 24-bit BMP files are supported") -JMESSAGE(JERR_BMP_BADHEADER, "Invalid BMP file: bad header length") -JMESSAGE(JERR_BMP_BADPLANES, "Invalid BMP file: biPlanes not equal to 1") -JMESSAGE(JERR_BMP_COLORSPACE, "BMP output must be grayscale or RGB") -JMESSAGE(JERR_BMP_COMPRESSED, "Sorry, compressed BMPs not yet supported") -JMESSAGE(JERR_BMP_EMPTY, "Empty BMP image") -JMESSAGE(JERR_BMP_NOT, "Not a BMP file - does not start with BM") -JMESSAGE(JTRC_BMP, "%ux%u 24-bit BMP image") -JMESSAGE(JTRC_BMP_MAPPED, "%ux%u 8-bit colormapped BMP image") -JMESSAGE(JTRC_BMP_OS2, "%ux%u 24-bit OS2 BMP image") -JMESSAGE(JTRC_BMP_OS2_MAPPED, "%ux%u 8-bit colormapped OS2 BMP image") -#endif /* BMP_SUPPORTED */ - -#ifdef GIF_SUPPORTED -JMESSAGE(JERR_GIF_BUG, "GIF output got confused") -JMESSAGE(JERR_GIF_CODESIZE, "Bogus GIF codesize %d") -JMESSAGE(JERR_GIF_COLORSPACE, "GIF output must be grayscale or RGB") -JMESSAGE(JERR_GIF_IMAGENOTFOUND, "Too few images in GIF file") -JMESSAGE(JERR_GIF_NOT, "Not a GIF file") -JMESSAGE(JTRC_GIF, "%ux%ux%d GIF image") -JMESSAGE(JTRC_GIF_BADVERSION, - "Warning: unexpected GIF version number '%c%c%c'") -JMESSAGE(JTRC_GIF_EXTENSION, "Ignoring GIF extension block of type 0x%02x") -JMESSAGE(JTRC_GIF_NONSQUARE, "Caution: nonsquare pixels in input") -JMESSAGE(JWRN_GIF_BADDATA, "Corrupt data in GIF file") -JMESSAGE(JWRN_GIF_CHAR, "Bogus char 0x%02x in GIF file, ignoring") -JMESSAGE(JWRN_GIF_ENDCODE, "Premature end of GIF image") -JMESSAGE(JWRN_GIF_NOMOREDATA, "Ran out of GIF bits") -#endif /* GIF_SUPPORTED */ - -#ifdef PPM_SUPPORTED -JMESSAGE(JERR_PPM_COLORSPACE, "PPM output must be grayscale or RGB") -JMESSAGE(JERR_PPM_NONNUMERIC, "Nonnumeric data in PPM file") -JMESSAGE(JERR_PPM_NOT, "Not a PPM/PGM file") -JMESSAGE(JTRC_PGM, "%ux%u PGM image") -JMESSAGE(JTRC_PGM_TEXT, "%ux%u text PGM image") -JMESSAGE(JTRC_PPM, "%ux%u PPM image") -JMESSAGE(JTRC_PPM_TEXT, "%ux%u text PPM image") -#endif /* PPM_SUPPORTED */ - -#ifdef RLE_SUPPORTED -JMESSAGE(JERR_RLE_BADERROR, "Bogus error code from RLE library") -JMESSAGE(JERR_RLE_COLORSPACE, "RLE output must be grayscale or RGB") -JMESSAGE(JERR_RLE_DIMENSIONS, "Image dimensions (%ux%u) too large for RLE") -JMESSAGE(JERR_RLE_EMPTY, "Empty RLE file") -JMESSAGE(JERR_RLE_EOF, "Premature EOF in RLE header") -JMESSAGE(JERR_RLE_MEM, "Insufficient memory for RLE header") -JMESSAGE(JERR_RLE_NOT, "Not an RLE file") -JMESSAGE(JERR_RLE_TOOMANYCHANNELS, "Cannot handle %d output channels for RLE") -JMESSAGE(JERR_RLE_UNSUPPORTED, "Cannot handle this RLE setup") -JMESSAGE(JTRC_RLE, "%ux%u full-color RLE file") -JMESSAGE(JTRC_RLE_FULLMAP, "%ux%u full-color RLE file with map of length %d") -JMESSAGE(JTRC_RLE_GRAY, "%ux%u grayscale RLE file") -JMESSAGE(JTRC_RLE_MAPGRAY, "%ux%u grayscale RLE file with map of length %d") -JMESSAGE(JTRC_RLE_MAPPED, "%ux%u colormapped RLE file with map of length %d") -#endif /* RLE_SUPPORTED */ - -#ifdef TARGA_SUPPORTED -JMESSAGE(JERR_TGA_BADCMAP, "Unsupported Targa colormap format") -JMESSAGE(JERR_TGA_BADPARMS, "Invalid or unsupported Targa file") -JMESSAGE(JERR_TGA_COLORSPACE, "Targa output must be grayscale or RGB") -JMESSAGE(JTRC_TGA, "%ux%u RGB Targa image") -JMESSAGE(JTRC_TGA_GRAY, "%ux%u grayscale Targa image") -JMESSAGE(JTRC_TGA_MAPPED, "%ux%u colormapped Targa image") -#else -JMESSAGE(JERR_TGA_NOTCOMP, "Targa support was not compiled") -#endif /* TARGA_SUPPORTED */ - -JMESSAGE(JERR_BAD_CMAP_FILE, - "Color map file is invalid or of unsupported format") -JMESSAGE(JERR_TOO_MANY_COLORS, - "Output file format cannot handle %d colormap entries") -JMESSAGE(JERR_UNGETC_FAILED, "ungetc failed") -#ifdef TARGA_SUPPORTED -JMESSAGE(JERR_UNKNOWN_FORMAT, - "Unrecognized input file format --- perhaps you need -targa") -#else -JMESSAGE(JERR_UNKNOWN_FORMAT, "Unrecognized input file format") -#endif -JMESSAGE(JERR_UNSUPPORTED_FORMAT, "Unsupported output file format") - -#ifdef JMAKE_ENUM_LIST - - JMSG_LASTADDONCODE -} ADDON_MESSAGE_CODE; - -#undef JMAKE_ENUM_LIST -#endif /* JMAKE_ENUM_LIST */ - -/* Zap JMESSAGE macro so that future re-inclusions do nothing by default */ -#undef JMESSAGE diff --git a/jpeg/cdjpeg.c b/jpeg/cdjpeg.c deleted file mode 100755 index b6250ff..0000000 --- a/jpeg/cdjpeg.c +++ /dev/null @@ -1,181 +0,0 @@ -/* - * cdjpeg.c - * - * Copyright (C) 1991-1997, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains common support routines used by the IJG application - * programs (cjpeg, djpeg, jpegtran). - */ - -#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ -#include /* to declare isupper(), tolower() */ -#ifdef NEED_SIGNAL_CATCHER -#include /* to declare signal() */ -#endif -#ifdef USE_SETMODE -#include /* to declare setmode()'s parameter macros */ -/* If you have setmode() but not , just delete this line: */ -#include /* to declare setmode() */ -#endif - - -/* - * Signal catcher to ensure that temporary files are removed before aborting. - * NB: for Amiga Manx C this is actually a global routine named _abort(); - * we put "#define signal_catcher _abort" in jconfig.h. Talk about bogus... - */ - -#ifdef NEED_SIGNAL_CATCHER - -static j_common_ptr sig_cinfo; - -void /* must be global for Manx C */ -signal_catcher (int signum) -{ - if (sig_cinfo != NULL) { - if (sig_cinfo->err != NULL) /* turn off trace output */ - sig_cinfo->err->trace_level = 0; - jpeg_destroy(sig_cinfo); /* clean up memory allocation & temp files */ - } - exit(EXIT_FAILURE); -} - - -GLOBAL(void) -enable_signal_catcher (j_common_ptr cinfo) -{ - sig_cinfo = cinfo; -#ifdef SIGINT /* not all systems have SIGINT */ - signal(SIGINT, signal_catcher); -#endif -#ifdef SIGTERM /* not all systems have SIGTERM */ - signal(SIGTERM, signal_catcher); -#endif -} - -#endif - - -/* - * Optional progress monitor: display a percent-done figure on stderr. - */ - -#ifdef PROGRESS_REPORT - -METHODDEF(void) -progress_monitor (j_common_ptr cinfo) -{ - cd_progress_ptr prog = (cd_progress_ptr) cinfo->progress; - int total_passes = prog->pub.total_passes + prog->total_extra_passes; - int percent_done = (int) (prog->pub.pass_counter*100L/prog->pub.pass_limit); - - if (percent_done != prog->percent_done) { - prog->percent_done = percent_done; - if (total_passes > 1) { - fprintf(stderr, "\rPass %d/%d: %3d%% ", - prog->pub.completed_passes + prog->completed_extra_passes + 1, - total_passes, percent_done); - } else { - fprintf(stderr, "\r %3d%% ", percent_done); - } - fflush(stderr); - } -} - - -GLOBAL(void) -start_progress_monitor (j_common_ptr cinfo, cd_progress_ptr progress) -{ - /* Enable progress display, unless trace output is on */ - if (cinfo->err->trace_level == 0) { - progress->pub.progress_monitor = progress_monitor; - progress->completed_extra_passes = 0; - progress->total_extra_passes = 0; - progress->percent_done = -1; - cinfo->progress = &progress->pub; - } -} - - -GLOBAL(void) -end_progress_monitor (j_common_ptr cinfo) -{ - /* Clear away progress display */ - if (cinfo->err->trace_level == 0) { - fprintf(stderr, "\r \r"); - fflush(stderr); - } -} - -#endif - - -/* - * Case-insensitive matching of possibly-abbreviated keyword switches. - * keyword is the constant keyword (must be lower case already), - * minchars is length of minimum legal abbreviation. - */ - -GLOBAL(boolean) -keymatch (char * arg, const char * keyword, int minchars) -{ - register int ca, ck; - register int nmatched = 0; - - while ((ca = *arg++) != '\0') { - if ((ck = *keyword++) == '\0') - return FALSE; /* arg longer than keyword, no good */ - if (isupper(ca)) /* force arg to lcase (assume ck is already) */ - ca = tolower(ca); - if (ca != ck) - return FALSE; /* no good */ - nmatched++; /* count matched characters */ - } - /* reached end of argument; fail if it's too short for unique abbrev */ - if (nmatched < minchars) - return FALSE; - return TRUE; /* A-OK */ -} - - -/* - * Routines to establish binary I/O mode for stdin and stdout. - * Non-Unix systems often require some hacking to get out of text mode. - */ - -GLOBAL(FILE *) -read_stdin (void) -{ - FILE * input_file = stdin; - -#ifdef USE_SETMODE /* need to hack file mode? */ - setmode(fileno(stdin), O_BINARY); -#endif -#ifdef USE_FDOPEN /* need to re-open in binary mode? */ - if ((input_file = fdopen(fileno(stdin), READ_BINARY)) == NULL) { - fprintf(stderr, "Cannot reopen stdin\n"); - exit(EXIT_FAILURE); - } -#endif - return input_file; -} - - -GLOBAL(FILE *) -write_stdout (void) -{ - FILE * output_file = stdout; - -#ifdef USE_SETMODE /* need to hack file mode? */ - setmode(fileno(stdout), O_BINARY); -#endif -#ifdef USE_FDOPEN /* need to re-open in binary mode? */ - if ((output_file = fdopen(fileno(stdout), WRITE_BINARY)) == NULL) { - fprintf(stderr, "Cannot reopen stdout\n"); - exit(EXIT_FAILURE); - } -#endif - return output_file; -} diff --git a/jpeg/cdjpeg.h b/jpeg/cdjpeg.h deleted file mode 100755 index ed024ac..0000000 --- a/jpeg/cdjpeg.h +++ /dev/null @@ -1,187 +0,0 @@ -/* - * cdjpeg.h - * - * Copyright (C) 1994-1997, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains common declarations for the sample applications - * cjpeg and djpeg. It is NOT used by the core JPEG library. - */ - -#define JPEG_CJPEG_DJPEG /* define proper options in jconfig.h */ -#define JPEG_INTERNAL_OPTIONS /* cjpeg.c,djpeg.c need to see xxx_SUPPORTED */ -#include "jinclude.h" -#include "jpeglib.h" -#include "jerror.h" /* get library error codes too */ -#include "cderror.h" /* get application-specific error codes */ - - -/* - * Object interface for cjpeg's source file decoding modules - */ - -typedef struct cjpeg_source_struct * cjpeg_source_ptr; - -struct cjpeg_source_struct { - JMETHOD(void, start_input, (j_compress_ptr cinfo, - cjpeg_source_ptr sinfo)); - JMETHOD(JDIMENSION, get_pixel_rows, (j_compress_ptr cinfo, - cjpeg_source_ptr sinfo)); - JMETHOD(void, finish_input, (j_compress_ptr cinfo, - cjpeg_source_ptr sinfo)); - - FILE *input_file; - - JSAMPARRAY buffer; - JDIMENSION buffer_height; -}; - - -/* - * Object interface for djpeg's output file encoding modules - */ - -typedef struct djpeg_dest_struct * djpeg_dest_ptr; - -struct djpeg_dest_struct { - /* start_output is called after jpeg_start_decompress finishes. - * The color map will be ready at this time, if one is needed. - */ - JMETHOD(void, start_output, (j_decompress_ptr cinfo, - djpeg_dest_ptr dinfo)); - /* Emit the specified number of pixel rows from the buffer. */ - JMETHOD(void, put_pixel_rows, (j_decompress_ptr cinfo, - djpeg_dest_ptr dinfo, - JDIMENSION rows_supplied)); - /* Finish up at the end of the image. */ - JMETHOD(void, finish_output, (j_decompress_ptr cinfo, - djpeg_dest_ptr dinfo)); - - /* Target file spec; filled in by djpeg.c after object is created. */ - FILE * output_file; - - /* Output pixel-row buffer. Created by module init or start_output. - * Width is cinfo->output_width * cinfo->output_components; - * height is buffer_height. - */ - JSAMPARRAY buffer; - JDIMENSION buffer_height; -}; - - -/* - * cjpeg/djpeg may need to perform extra passes to convert to or from - * the source/destination file format. The JPEG library does not know - * about these passes, but we'd like them to be counted by the progress - * monitor. We use an expanded progress monitor object to hold the - * additional pass count. - */ - -struct cdjpeg_progress_mgr { - struct jpeg_progress_mgr pub; /* fields known to JPEG library */ - int completed_extra_passes; /* extra passes completed */ - int total_extra_passes; /* total extra */ - /* last printed percentage stored here to avoid multiple printouts */ - int percent_done; -}; - -typedef struct cdjpeg_progress_mgr * cd_progress_ptr; - - -/* Short forms of external names for systems with brain-damaged linkers. */ - -#ifdef NEED_SHORT_EXTERNAL_NAMES -#define jinit_read_bmp jIRdBMP -#define jinit_write_bmp jIWrBMP -#define jinit_read_gif jIRdGIF -#define jinit_write_gif jIWrGIF -#define jinit_read_ppm jIRdPPM -#define jinit_write_ppm jIWrPPM -#define jinit_read_rle jIRdRLE -#define jinit_write_rle jIWrRLE -#define jinit_read_targa jIRdTarga -#define jinit_write_targa jIWrTarga -#define read_quant_tables RdQTables -#define read_scan_script RdScnScript -#define set_quality_ratings SetQRates -#define set_quant_slots SetQSlots -#define set_sample_factors SetSFacts -#define read_color_map RdCMap -#define enable_signal_catcher EnSigCatcher -#define start_progress_monitor StProgMon -#define end_progress_monitor EnProgMon -#define read_stdin RdStdin -#define write_stdout WrStdout -#endif /* NEED_SHORT_EXTERNAL_NAMES */ - -/* Module selection routines for I/O modules. */ - -EXTERN(cjpeg_source_ptr) jinit_read_bmp JPP((j_compress_ptr cinfo)); -EXTERN(djpeg_dest_ptr) jinit_write_bmp JPP((j_decompress_ptr cinfo, - boolean is_os2)); -EXTERN(cjpeg_source_ptr) jinit_read_gif JPP((j_compress_ptr cinfo)); -EXTERN(djpeg_dest_ptr) jinit_write_gif JPP((j_decompress_ptr cinfo)); -EXTERN(cjpeg_source_ptr) jinit_read_ppm JPP((j_compress_ptr cinfo)); -EXTERN(djpeg_dest_ptr) jinit_write_ppm JPP((j_decompress_ptr cinfo)); -EXTERN(cjpeg_source_ptr) jinit_read_rle JPP((j_compress_ptr cinfo)); -EXTERN(djpeg_dest_ptr) jinit_write_rle JPP((j_decompress_ptr cinfo)); -EXTERN(cjpeg_source_ptr) jinit_read_targa JPP((j_compress_ptr cinfo)); -EXTERN(djpeg_dest_ptr) jinit_write_targa JPP((j_decompress_ptr cinfo)); - -/* cjpeg support routines (in rdswitch.c) */ - -EXTERN(boolean) read_quant_tables JPP((j_compress_ptr cinfo, char * filename, - boolean force_baseline)); -EXTERN(boolean) read_scan_script JPP((j_compress_ptr cinfo, char * filename)); -EXTERN(boolean) set_quality_ratings JPP((j_compress_ptr cinfo, char *arg, - boolean force_baseline)); -EXTERN(boolean) set_quant_slots JPP((j_compress_ptr cinfo, char *arg)); -EXTERN(boolean) set_sample_factors JPP((j_compress_ptr cinfo, char *arg)); - -/* djpeg support routines (in rdcolmap.c) */ - -EXTERN(void) read_color_map JPP((j_decompress_ptr cinfo, FILE * infile)); - -/* common support routines (in cdjpeg.c) */ - -EXTERN(void) enable_signal_catcher JPP((j_common_ptr cinfo)); -EXTERN(void) start_progress_monitor JPP((j_common_ptr cinfo, - cd_progress_ptr progress)); -EXTERN(void) end_progress_monitor JPP((j_common_ptr cinfo)); -EXTERN(boolean) keymatch JPP((char * arg, const char * keyword, int minchars)); -EXTERN(FILE *) read_stdin JPP((void)); -EXTERN(FILE *) write_stdout JPP((void)); - -/* miscellaneous useful macros */ - -#ifdef DONT_USE_B_MODE /* define mode parameters for fopen() */ -#define READ_BINARY "r" -#define WRITE_BINARY "w" -#else -#ifdef VMS /* VMS is very nonstandard */ -#define READ_BINARY "rb", "ctx=stm" -#define WRITE_BINARY "wb", "ctx=stm" -#else /* standard ANSI-compliant case */ -#define READ_BINARY "rb" -#define WRITE_BINARY "wb" -#endif -#endif - -#ifndef EXIT_FAILURE /* define exit() codes if not provided */ -#define EXIT_FAILURE 1 -#endif -#ifndef EXIT_SUCCESS -#ifdef VMS -#define EXIT_SUCCESS 1 /* VMS is very nonstandard */ -#else -#define EXIT_SUCCESS 0 -#endif -#endif -#ifndef EXIT_WARNING -#ifdef VMS -#define EXIT_WARNING 1 /* VMS is very nonstandard */ -#else -#define EXIT_WARNING 2 -#endif -#endif diff --git a/jpeg/change.log b/jpeg/change.log deleted file mode 100755 index 729bca6..0000000 --- a/jpeg/change.log +++ /dev/null @@ -1,346 +0,0 @@ -CHANGE LOG for Independent JPEG Group's JPEG software - - -Version 8d 15-Jan-2012 ------------------------ - -Add cjpeg -rgb option to create RGB JPEG files. -Using this switch suppresses the conversion from RGB -colorspace input to the default YCbCr JPEG colorspace. -This feature allows true lossless JPEG coding of RGB color images. -The recommended command for this purpose is currently -cjpeg -rgb -block 1 -arithmetic. -SmartScale capable decoder (introduced with IJG JPEG 8) required. -Thank to Michael Koch for the initial suggestion. - -Add option to disable the region adjustment in the transupp crop code. -Thank to Jeffrey Friedl for the suggestion. - -Thank to Richard Jones and Edd Dawson for various minor corrections. - -Thank to Akim Demaille for configure.ac cleanup. - - -Version 8c 16-Jan-2011 ------------------------ - -Add option to compression library and cjpeg (-block N) to use -different DCT block size. -All N from 1 to 16 are possible. Default is 8 (baseline format). -Larger values produce higher compression, -smaller values produce higher quality. -SmartScale capable decoder (introduced with IJG JPEG 8) required. - - -Version 8b 16-May-2010 ------------------------ - -Repair problem in new memory source manager with corrupt JPEG data. -Thank to Ted Campbell and Samuel Chun for the report. - -Repair problem in Makefile.am test target. -Thank to anonymous user for the report. - -Support MinGW installation with automatic configure. -Thank to Volker Grabsch for the suggestion. - - -Version 8a 28-Feb-2010 ------------------------ - -Writing tables-only datastreams via jpeg_write_tables works again. - -Support 32-bit BMPs (RGB image with Alpha channel) for read in cjpeg. -Thank to Brett Blackham for the suggestion. - -Improve accuracy in floating point IDCT calculation. -Thank to Robert Hooke for the hint. - - -Version 8 10-Jan-2010 ----------------------- - -jpegtran now supports the same -scale option as djpeg for "lossless" resize. -An implementation of the JPEG SmartScale extension is required for this -feature. A (draft) specification of the JPEG SmartScale extension is -available as a contributed document at ITU and ISO. Revision 2 or later -of the document is required (latest document version is Revision 3). -The SmartScale extension will enable more features beside lossless resize -in future implementations, as described in the document (new compression -options). - -Add sanity check in BMP reader module to avoid cjpeg crash for empty input -image (thank to Isaev Ildar of ISP RAS, Moscow, RU for reporting this error). - -Add data source and destination managers for read from and write to -memory buffers. New API functions jpeg_mem_src and jpeg_mem_dest. -Thank to Roberto Boni from Italy for the suggestion. - - -Version 7 27-Jun-2009 ----------------------- - -New scaled DCTs implemented. -djpeg now supports scalings N/8 with all N from 1 to 16. -cjpeg now supports scalings 8/N with all N from 1 to 16. -Scaled DCTs with size larger than 8 are now also used for resolving the -common 2x2 chroma subsampling case without additional spatial resampling. -Separate spatial resampling for those kind of files is now only necessary -for N>8 scaling cases. -Furthermore, separate scaled DCT functions are provided for direct resolving -of the common asymmetric subsampling cases (2x1 and 1x2) without additional -spatial resampling. - -cjpeg -quality option has been extended for support of separate quality -settings for luminance and chrominance (or in general, for every provided -quantization table slot). -New API function jpeg_default_qtables() and q_scale_factor array in library. - -Added -nosmooth option to cjpeg, complementary to djpeg. -New variable "do_fancy_downsampling" in library, complement to fancy -upsampling. Fancy upsampling now uses direct DCT scaling with sizes -larger than 8. The old method is not reversible and has been removed. - -Support arithmetic entropy encoding and decoding. -Added files jaricom.c, jcarith.c, jdarith.c. - -Straighten the file structure: -Removed files jidctred.c, jcphuff.c, jchuff.h, jdphuff.c, jdhuff.h. - -jpegtran has a new "lossless" cropping feature. - -Implement -perfect option in jpegtran, new API function -jtransform_perfect_transform() in transupp. (DP 204_perfect.dpatch) - -Better error messages for jpegtran fopen failure. -(DP 203_jpegtran_errmsg.dpatch) - -Fix byte order issue with 16bit PPM/PGM files in rdppm.c/wrppm.c: -according to Netpbm, the de facto standard implementation of the PNM formats, -the most significant byte is first. (DP 203_rdppm.dpatch) - -Add -raw option to rdjpgcom not to mangle the output. -(DP 205_rdjpgcom_raw.dpatch) - -Make rdjpgcom locale aware. (DP 201_rdjpgcom_locale.dpatch) - -Add extern "C" to jpeglib.h. -This avoids the need to put extern "C" { ... } around #include "jpeglib.h" -in your C++ application. Defining the symbol DONT_USE_EXTERN_C in the -configuration prevents this. (DP 202_jpeglib.h_c++.dpatch) - - -Version 6b 27-Mar-1998 ------------------------ - -jpegtran has new features for lossless image transformations (rotation -and flipping) as well as "lossless" reduction to grayscale. - -jpegtran now copies comments by default; it has a -copy switch to enable -copying all APPn blocks as well, or to suppress comments. (Formerly it -always suppressed comments and APPn blocks.) jpegtran now also preserves -JFIF version and resolution information. - -New decompressor library feature: COM and APPn markers found in the input -file can be saved in memory for later use by the application. (Before, -you had to code this up yourself with a custom marker processor.) - -There is an unused field "void * client_data" now in compress and decompress -parameter structs; this may be useful in some applications. - -JFIF version number information is now saved by the decoder and accepted by -the encoder. jpegtran uses this to copy the source file's version number, -to ensure "jpegtran -copy all" won't create bogus files that contain JFXX -extensions but claim to be version 1.01. Applications that generate their -own JFXX extension markers also (finally) have a supported way to cause the -encoder to emit JFIF version number 1.02. - -djpeg's trace mode reports JFIF 1.02 thumbnail images as such, rather -than as unknown APP0 markers. - -In -verbose mode, djpeg and rdjpgcom will try to print the contents of -APP12 markers as text. Some digital cameras store useful text information -in APP12 markers. - -Handling of truncated data streams is more robust: blocks beyond the one in -which the error occurs will be output as uniform gray, or left unchanged -if decoding a progressive JPEG. The appearance no longer depends on the -Huffman tables being used. - -Huffman tables are checked for validity much more carefully than before. - -To avoid the Unisys LZW patent, djpeg's GIF output capability has been -changed to produce "uncompressed GIFs", and cjpeg's GIF input capability -has been removed altogether. We're not happy about it either, but there -seems to be no good alternative. - -The configure script now supports building libjpeg as a shared library -on many flavors of Unix (all the ones that GNU libtool knows how to -build shared libraries for). Use "./configure --enable-shared" to -try this out. - -New jconfig file and makefiles for Microsoft Visual C++ and Developer Studio. -Also, a jconfig file and a build script for Metrowerks CodeWarrior -on Apple Macintosh. makefile.dj has been updated for DJGPP v2, and there -are miscellaneous other minor improvements in the makefiles. - -jmemmac.c now knows how to create temporary files following Mac System 7 -conventions. - -djpeg's -map switch is now able to read raw-format PPM files reliably. - -cjpeg -progressive -restart no longer generates any unnecessary DRI markers. - -Multiple calls to jpeg_simple_progression for a single JPEG object -no longer leak memory. - - -Version 6a 7-Feb-96 --------------------- - -Library initialization sequence modified to detect version mismatches -and struct field packing mismatches between library and calling application. -This change requires applications to be recompiled, but does not require -any application source code change. - -All routine declarations changed to the style "GLOBAL(type) name ...", -that is, GLOBAL, LOCAL, METHODDEF, EXTERN are now macros taking the -routine's return type as an argument. This makes it possible to add -Microsoft-style linkage keywords to all the routines by changing just -these macros. Note that any application code that was using these macros -will have to be changed. - -DCT coefficient quantization tables are now stored in normal array order -rather than zigzag order. Application code that calls jpeg_add_quant_table, -or otherwise manipulates quantization tables directly, will need to be -changed. If you need to make such code work with either older or newer -versions of the library, a test like "#if JPEG_LIB_VERSION >= 61" is -recommended. - -djpeg's trace capability now dumps DQT tables in natural order, not zigzag -order. This allows the trace output to be made into a "-qtables" file -more easily. - -New system-dependent memory manager module for use on Apple Macintosh. - -Fix bug in cjpeg's -smooth option: last one or two scanlines would be -duplicates of the prior line unless the image height mod 16 was 1 or 2. - -Repair minor problems in VMS, BCC, MC6 makefiles. - -New configure script based on latest GNU Autoconf. - -Correct the list of include files needed by MetroWerks C for ccommand(). - -Numerous small documentation updates. - - -Version 6 2-Aug-95 -------------------- - -Progressive JPEG support: library can read and write full progressive JPEG -files. A "buffered image" mode supports incremental decoding for on-the-fly -display of progressive images. Simply recompiling an existing IJG-v5-based -decoder with v6 should allow it to read progressive files, though of course -without any special progressive display. - -New "jpegtran" application performs lossless transcoding between different -JPEG formats; primarily, it can be used to convert baseline to progressive -JPEG and vice versa. In support of jpegtran, the library now allows lossless -reading and writing of JPEG files as DCT coefficient arrays. This ability -may be of use in other applications. - -Notes for programmers: -* We changed jpeg_start_decompress() to be able to suspend; this makes all -decoding modes available to suspending-input applications. However, -existing applications that use suspending input will need to be changed -to check the return value from jpeg_start_decompress(). You don't need to -do anything if you don't use a suspending data source. -* We changed the interface to the virtual array routines: access_virt_array -routines now take a count of the number of rows to access this time. The -last parameter to request_virt_array routines is now interpreted as the -maximum number of rows that may be accessed at once, but not necessarily -the height of every access. - - -Version 5b 15-Mar-95 ---------------------- - -Correct bugs with grayscale images having v_samp_factor > 1. - -jpeg_write_raw_data() now supports output suspension. - -Correct bugs in "configure" script for case of compiling in -a directory other than the one containing the source files. - -Repair bug in jquant1.c: sometimes didn't use as many colors as it could. - -Borland C makefile and jconfig file work under either MS-DOS or OS/2. - -Miscellaneous improvements to documentation. - - -Version 5a 7-Dec-94 --------------------- - -Changed color conversion roundoff behavior so that grayscale values are -represented exactly. (This causes test image files to change.) - -Make ordered dither use 16x16 instead of 4x4 pattern for a small quality -improvement. - -New configure script based on latest GNU Autoconf. -Fix configure script to handle CFLAGS correctly. -Rename *.auto files to *.cfg, so that configure script still works if -file names have been truncated for DOS. - -Fix bug in rdbmp.c: didn't allow for extra data between header and image. - -Modify rdppm.c/wrppm.c to handle 2-byte raw PPM/PGM formats for 12-bit data. - -Fix several bugs in rdrle.c. - -NEED_SHORT_EXTERNAL_NAMES option was broken. - -Revise jerror.h/jerror.c for more flexibility in message table. - -Repair oversight in jmemname.c NO_MKTEMP case: file could be there -but unreadable. - - -Version 5 24-Sep-94 --------------------- - -Version 5 represents a nearly complete redesign and rewrite of the IJG -software. Major user-visible changes include: - * Automatic configuration simplifies installation for most Unix systems. - * A range of speed vs. image quality tradeoffs are supported. - This includes resizing of an image during decompression: scaling down - by a factor of 1/2, 1/4, or 1/8 is handled very efficiently. - * New programs rdjpgcom and wrjpgcom allow insertion and extraction - of text comments in a JPEG file. - -The application programmer's interface to the library has changed completely. -Notable improvements include: - * We have eliminated the use of callback routines for handling the - uncompressed image data. The application now sees the library as a - set of routines that it calls to read or write image data on a - scanline-by-scanline basis. - * The application image data is represented in a conventional interleaved- - pixel format, rather than as a separate array for each color channel. - This can save a copying step in many programs. - * The handling of compressed data has been cleaned up: the application can - supply routines to source or sink the compressed data. It is possible to - suspend processing on source/sink buffer overrun, although this is not - supported in all operating modes. - * All static state has been eliminated from the library, so that multiple - instances of compression or decompression can be active concurrently. - * JPEG abbreviated datastream formats are supported, ie, quantization and - Huffman tables can be stored separately from the image data. - * And not only that, but the documentation of the library has improved - considerably! - - -The last widely used release before the version 5 rewrite was version 4A of -18-Feb-93. Change logs before that point have been discarded, since they -are not of much interest after the rewrite. diff --git a/jpeg/cjpeg.1 b/jpeg/cjpeg.1 deleted file mode 100755 index c10f971..0000000 --- a/jpeg/cjpeg.1 +++ /dev/null @@ -1,348 +0,0 @@ -.TH CJPEG 1 "28 August 2011" -.SH NAME -cjpeg \- compress an image file to a JPEG file -.SH SYNOPSIS -.B cjpeg -[ -.I options -] -[ -.I filename -] -.LP -.SH DESCRIPTION -.LP -.B cjpeg -compresses the named image file, or the standard input if no file is -named, and produces a JPEG/JFIF file on the standard output. -The currently supported input file formats are: PPM (PBMPLUS color -format), PGM (PBMPLUS gray-scale format), BMP, Targa, and RLE (Utah Raster -Toolkit format). (RLE is supported only if the URT library is available.) -.SH OPTIONS -All switch names may be abbreviated; for example, -.B \-grayscale -may be written -.B \-gray -or -.BR \-gr . -Most of the "basic" switches can be abbreviated to as little as one letter. -Upper and lower case are equivalent (thus -.B \-BMP -is the same as -.BR \-bmp ). -British spellings are also accepted (e.g., -.BR \-greyscale ), -though for brevity these are not mentioned below. -.PP -The basic switches are: -.TP -.BI \-quality " N[,...]" -Scale quantization tables to adjust image quality. Quality is 0 (worst) to -100 (best); default is 75. (See below for more info.) -.TP -.B \-grayscale -Create monochrome JPEG file from color input. Be sure to use this switch when -compressing a grayscale BMP file, because -.B cjpeg -isn't bright enough to notice whether a BMP file uses only shades of gray. -By saying -.BR \-grayscale , -you'll get a smaller JPEG file that takes less time to process. -.TP -.B \-rgb -Create RGB JPEG file. -Using this switch suppresses the conversion from RGB -colorspace input to the default YCbCr JPEG colorspace. -Use this switch in combination with the -.BI \-block " N" -switch (see below) for lossless JPEG coding. -.TP -.B \-optimize -Perform optimization of entropy encoding parameters. Without this, default -encoding parameters are used. -.B \-optimize -usually makes the JPEG file a little smaller, but -.B cjpeg -runs somewhat slower and needs much more memory. Image quality and speed of -decompression are unaffected by -.BR \-optimize . -.TP -.B \-progressive -Create progressive JPEG file (see below). -.TP -.BI \-scale " M/N" -Scale the output image by a factor M/N. Currently supported scale factors are -M/N with all N from 1 to 16, where M is the destination DCT size, which is 8 -by default (see -.BI \-block " N" -switch below). -.TP -.B \-targa -Input file is Targa format. Targa files that contain an "identification" -field will not be automatically recognized by -.BR cjpeg ; -for such files you must specify -.B \-targa -to make -.B cjpeg -treat the input as Targa format. -For most Targa files, you won't need this switch. -.PP -The -.B \-quality -switch lets you trade off compressed file size against quality of the -reconstructed image: the higher the quality setting, the larger the JPEG file, -and the closer the output image will be to the original input. Normally you -want to use the lowest quality setting (smallest file) that decompresses into -something visually indistinguishable from the original image. For this -purpose the quality setting should be between 50 and 95; the default of 75 is -often about right. If you see defects at -.B \-quality -75, then go up 5 or 10 counts at a time until you are happy with the output -image. (The optimal setting will vary from one image to another.) -.PP -.B \-quality -100 will generate a quantization table of all 1's, minimizing loss in the -quantization step (but there is still information loss in subsampling, as well -as roundoff error). This setting is mainly of interest for experimental -purposes. Quality values above about 95 are -.B not -recommended for normal use; the compressed file size goes up dramatically for -hardly any gain in output image quality. -.PP -In the other direction, quality values below 50 will produce very small files -of low image quality. Settings around 5 to 10 might be useful in preparing an -index of a large image library, for example. Try -.B \-quality -2 (or so) for some amusing Cubist effects. (Note: quality -values below about 25 generate 2-byte quantization tables, which are -considered optional in the JPEG standard. -.B cjpeg -emits a warning message when you give such a quality value, because some -other JPEG programs may be unable to decode the resulting file. Use -.B \-baseline -if you need to ensure compatibility at low quality values.) -.PP -The -.B \-quality -option has been extended in IJG version 7 for support of separate quality -settings for luminance and chrominance (or in general, for every provided -quantization table slot). This feature is useful for high-quality -applications which cannot accept the damage of color data by coarse -subsampling settings. You can now easily reduce the color data amount more -smoothly with finer control without separate subsampling. The resulting file -is fully compliant with standard JPEG decoders. -Note that the -.B \-quality -ratings refer to the quantization table slots, and that the last value is -replicated if there are more q-table slots than parameters. The default -q-table slots are 0 for luminance and 1 for chrominance with default tables as -given in the JPEG standard. This is compatible with the old behaviour in case -that only one parameter is given, which is then used for both luminance and -chrominance (slots 0 and 1). More or custom quantization tables can be set -with -.B \-qtables -and assigned to components with -.B \-qslots -parameter (see the "wizard" switches below). -.B Caution: -You must explicitly add -.BI \-sample " 1x1" -for efficient separate color -quality selection, since the default value used by library is 2x2! -.PP -The -.B \-progressive -switch creates a "progressive JPEG" file. In this type of JPEG file, the data -is stored in multiple scans of increasing quality. If the file is being -transmitted over a slow communications link, the decoder can use the first -scan to display a low-quality image very quickly, and can then improve the -display with each subsequent scan. The final image is exactly equivalent to a -standard JPEG file of the same quality setting, and the total file size is -about the same --- often a little smaller. -.PP -Switches for advanced users: -.TP -.B \-arithmetic -Use arithmetic coding. -.B Caution: -arithmetic coded JPEG is not yet widely implemented, so many decoders will be -unable to view an arithmetic coded JPEG file at all. -.TP -.BI \-block " N" -Set DCT block size. All N from 1 to 16 are possible. -Default is 8 (baseline format). -Larger values produce higher compression, -smaller values produce higher quality -(exact DCT stage possible with 1 or 2; with the default quality of 75 and -default Luminance qtable the DCT+Quantization stage is lossless for N=1). -.B Caution: -An implementation of the JPEG SmartScale extension is required for this -feature. SmartScale enabled JPEG is not yet widely implemented, so many -decoders will be unable to view a SmartScale extended JPEG file at all. -.TP -.B \-dct int -Use integer DCT method (default). -.TP -.B \-dct fast -Use fast integer DCT (less accurate). -.TP -.B \-dct float -Use floating-point DCT method. -The float method is very slightly more accurate than the int method, but is -much slower unless your machine has very fast floating-point hardware. Also -note that results of the floating-point method may vary slightly across -machines, while the integer methods should give the same results everywhere. -The fast integer method is much less accurate than the other two. -.TP -.B \-nosmooth -Don't use high-quality downsampling. -.TP -.BI \-restart " N" -Emit a JPEG restart marker every N MCU rows, or every N MCU blocks if "B" is -attached to the number. -.B \-restart 0 -(the default) means no restart markers. -.TP -.BI \-smooth " N" -Smooth the input image to eliminate dithering noise. N, ranging from 1 to -100, indicates the strength of smoothing. 0 (the default) means no smoothing. -.TP -.BI \-maxmemory " N" -Set limit for amount of memory to use in processing large images. Value is -in thousands of bytes, or millions of bytes if "M" is attached to the -number. For example, -.B \-max 4m -selects 4000000 bytes. If more space is needed, temporary files will be used. -.TP -.BI \-outfile " name" -Send output image to the named file, not to standard output. -.TP -.B \-verbose -Enable debug printout. More -.BR \-v 's -give more output. Also, version information is printed at startup. -.TP -.B \-debug -Same as -.BR \-verbose . -.PP -The -.B \-restart -option inserts extra markers that allow a JPEG decoder to resynchronize after -a transmission error. Without restart markers, any damage to a compressed -file will usually ruin the image from the point of the error to the end of the -image; with restart markers, the damage is usually confined to the portion of -the image up to the next restart marker. Of course, the restart markers -occupy extra space. We recommend -.B \-restart 1 -for images that will be transmitted across unreliable networks such as Usenet. -.PP -The -.B \-smooth -option filters the input to eliminate fine-scale noise. This is often useful -when converting dithered images to JPEG: a moderate smoothing factor of 10 to -50 gets rid of dithering patterns in the input file, resulting in a smaller -JPEG file and a better-looking image. Too large a smoothing factor will -visibly blur the image, however. -.PP -Switches for wizards: -.TP -.B \-baseline -Force baseline-compatible quantization tables to be generated. This clamps -quantization values to 8 bits even at low quality settings. (This switch is -poorly named, since it does not ensure that the output is actually baseline -JPEG. For example, you can use -.B \-baseline -and -.B \-progressive -together.) -.TP -.BI \-qtables " file" -Use the quantization tables given in the specified text file. -.TP -.BI \-qslots " N[,...]" -Select which quantization table to use for each color component. -.TP -.BI \-sample " HxV[,...]" -Set JPEG sampling factors for each color component. -.TP -.BI \-scans " file" -Use the scan script given in the specified text file. -.PP -The "wizard" switches are intended for experimentation with JPEG. If you -don't know what you are doing, \fBdon't use them\fR. These switches are -documented further in the file wizard.txt. -.SH EXAMPLES -.LP -This example compresses the PPM file foo.ppm with a quality factor of -60 and saves the output as foo.jpg: -.IP -.B cjpeg \-quality -.I 60 foo.ppm -.B > -.I foo.jpg -.SH HINTS -Color GIF files are not the ideal input for JPEG; JPEG is really intended for -compressing full-color (24-bit) images. In particular, don't try to convert -cartoons, line drawings, and other images that have only a few distinct -colors. GIF works great on these, JPEG does not. If you want to convert a -GIF to JPEG, you should experiment with -.BR cjpeg 's -.B \-quality -and -.B \-smooth -options to get a satisfactory conversion. -.B \-smooth 10 -or so is often helpful. -.PP -Avoid running an image through a series of JPEG compression/decompression -cycles. Image quality loss will accumulate; after ten or so cycles the image -may be noticeably worse than it was after one cycle. It's best to use a -lossless format while manipulating an image, then convert to JPEG format when -you are ready to file the image away. -.PP -The -.B \-optimize -option to -.B cjpeg -is worth using when you are making a "final" version for posting or archiving. -It's also a win when you are using low quality settings to make very small -JPEG files; the percentage improvement is often a lot more than it is on -larger files. (At present, -.B \-optimize -mode is always selected when generating progressive JPEG files.) -.SH ENVIRONMENT -.TP -.B JPEGMEM -If this environment variable is set, its value is the default memory limit. -The value is specified as described for the -.B \-maxmemory -switch. -.B JPEGMEM -overrides the default value specified when the program was compiled, and -itself is overridden by an explicit -.BR \-maxmemory . -.SH SEE ALSO -.BR djpeg (1), -.BR jpegtran (1), -.BR rdjpgcom (1), -.BR wrjpgcom (1) -.br -.BR ppm (5), -.BR pgm (5) -.br -Wallace, Gregory K. "The JPEG Still Picture Compression Standard", -Communications of the ACM, April 1991 (vol. 34, no. 4), pp. 30-44. -.SH AUTHOR -Independent JPEG Group -.SH BUGS -GIF input files are no longer supported, to avoid the Unisys LZW patent. -(Conversion of GIF files to JPEG is usually a bad idea anyway.) -.PP -Not all variants of BMP and Targa file formats are supported. -.PP -The -.B \-targa -switch is not a bug, it's a feature. (It would be a bug if the Targa format -designers had not been clueless.) diff --git a/jpeg/cjpeg.c b/jpeg/cjpeg.c deleted file mode 100755 index 9a9a09a..0000000 --- a/jpeg/cjpeg.c +++ /dev/null @@ -1,643 +0,0 @@ -/* - * cjpeg.c - * - * Copyright (C) 1991-1998, Thomas G. Lane. - * Modified 2003-2011 by Guido Vollbeding. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains a command-line user interface for the JPEG compressor. - * It should work on any system with Unix- or MS-DOS-style command lines. - * - * Two different command line styles are permitted, depending on the - * compile-time switch TWO_FILE_COMMANDLINE: - * cjpeg [options] inputfile outputfile - * cjpeg [options] [inputfile] - * In the second style, output is always to standard output, which you'd - * normally redirect to a file or pipe to some other program. Input is - * either from a named file or from standard input (typically redirected). - * The second style is convenient on Unix but is unhelpful on systems that - * don't support pipes. Also, you MUST use the first style if your system - * doesn't do binary I/O to stdin/stdout. - * To simplify script writing, the "-outfile" switch is provided. The syntax - * cjpeg [options] -outfile outputfile inputfile - * works regardless of which command line style is used. - */ - -#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ -#include "jversion.h" /* for version message */ - -#ifdef USE_CCOMMAND /* command-line reader for Macintosh */ -#ifdef __MWERKS__ -#include /* Metrowerks needs this */ -#include /* ... and this */ -#endif -#ifdef THINK_C -#include /* Think declares it here */ -#endif -#endif - - -/* Create the add-on message string table. */ - -#define JMESSAGE(code,string) string , - -static const char * const cdjpeg_message_table[] = { -#include "cderror.h" - NULL -}; - - -/* - * This routine determines what format the input file is, - * and selects the appropriate input-reading module. - * - * To determine which family of input formats the file belongs to, - * we may look only at the first byte of the file, since C does not - * guarantee that more than one character can be pushed back with ungetc. - * Looking at additional bytes would require one of these approaches: - * 1) assume we can fseek() the input file (fails for piped input); - * 2) assume we can push back more than one character (works in - * some C implementations, but unportable); - * 3) provide our own buffering (breaks input readers that want to use - * stdio directly, such as the RLE library); - * or 4) don't put back the data, and modify the input_init methods to assume - * they start reading after the start of file (also breaks RLE library). - * #1 is attractive for MS-DOS but is untenable on Unix. - * - * The most portable solution for file types that can't be identified by their - * first byte is to make the user tell us what they are. This is also the - * only approach for "raw" file types that contain only arbitrary values. - * We presently apply this method for Targa files. Most of the time Targa - * files start with 0x00, so we recognize that case. Potentially, however, - * a Targa file could start with any byte value (byte 0 is the length of the - * seldom-used ID field), so we provide a switch to force Targa input mode. - */ - -static boolean is_targa; /* records user -targa switch */ - - -LOCAL(cjpeg_source_ptr) -select_file_type (j_compress_ptr cinfo, FILE * infile) -{ - int c; - - if (is_targa) { -#ifdef TARGA_SUPPORTED - return jinit_read_targa(cinfo); -#else - ERREXIT(cinfo, JERR_TGA_NOTCOMP); -#endif - } - - if ((c = getc(infile)) == EOF) - ERREXIT(cinfo, JERR_INPUT_EMPTY); - if (ungetc(c, infile) == EOF) - ERREXIT(cinfo, JERR_UNGETC_FAILED); - - switch (c) { -#ifdef BMP_SUPPORTED - case 'B': - return jinit_read_bmp(cinfo); -#endif -#ifdef GIF_SUPPORTED - case 'G': - return jinit_read_gif(cinfo); -#endif -#ifdef PPM_SUPPORTED - case 'P': - return jinit_read_ppm(cinfo); -#endif -#ifdef RLE_SUPPORTED - case 'R': - return jinit_read_rle(cinfo); -#endif -#ifdef TARGA_SUPPORTED - case 0x00: - return jinit_read_targa(cinfo); -#endif - default: - ERREXIT(cinfo, JERR_UNKNOWN_FORMAT); - break; - } - - return NULL; /* suppress compiler warnings */ -} - - -/* - * Argument-parsing code. - * The switch parser is designed to be useful with DOS-style command line - * syntax, ie, intermixed switches and file names, where only the switches - * to the left of a given file name affect processing of that file. - * The main program in this file doesn't actually use this capability... - */ - - -static const char * progname; /* program name for error messages */ -static char * outfilename; /* for -outfile switch */ - - -LOCAL(void) -usage (void) -/* complain about bad command line */ -{ - fprintf(stderr, "usage: %s [switches] ", progname); -#ifdef TWO_FILE_COMMANDLINE - fprintf(stderr, "inputfile outputfile\n"); -#else - fprintf(stderr, "[inputfile]\n"); -#endif - - fprintf(stderr, "Switches (names may be abbreviated):\n"); - fprintf(stderr, " -quality N[,...] Compression quality (0..100; 5-95 is useful range)\n"); - fprintf(stderr, " -grayscale Create monochrome JPEG file\n"); - fprintf(stderr, " -rgb Create RGB JPEG file\n"); -#ifdef ENTROPY_OPT_SUPPORTED - fprintf(stderr, " -optimize Optimize Huffman table (smaller file, but slow compression)\n"); -#endif -#ifdef C_PROGRESSIVE_SUPPORTED - fprintf(stderr, " -progressive Create progressive JPEG file\n"); -#endif -#ifdef DCT_SCALING_SUPPORTED - fprintf(stderr, " -scale M/N Scale image by fraction M/N, eg, 1/2\n"); -#endif -#ifdef TARGA_SUPPORTED - fprintf(stderr, " -targa Input file is Targa format (usually not needed)\n"); -#endif - fprintf(stderr, "Switches for advanced users:\n"); -#ifdef C_ARITH_CODING_SUPPORTED - fprintf(stderr, " -arithmetic Use arithmetic coding\n"); -#endif -#ifdef DCT_SCALING_SUPPORTED - fprintf(stderr, " -block N DCT block size (1..16; default is 8)\n"); -#endif -#ifdef DCT_ISLOW_SUPPORTED - fprintf(stderr, " -dct int Use integer DCT method%s\n", - (JDCT_DEFAULT == JDCT_ISLOW ? " (default)" : "")); -#endif -#ifdef DCT_IFAST_SUPPORTED - fprintf(stderr, " -dct fast Use fast integer DCT (less accurate)%s\n", - (JDCT_DEFAULT == JDCT_IFAST ? " (default)" : "")); -#endif -#ifdef DCT_FLOAT_SUPPORTED - fprintf(stderr, " -dct float Use floating-point DCT method%s\n", - (JDCT_DEFAULT == JDCT_FLOAT ? " (default)" : "")); -#endif - fprintf(stderr, " -nosmooth Don't use high-quality downsampling\n"); - fprintf(stderr, " -restart N Set restart interval in rows, or in blocks with B\n"); -#ifdef INPUT_SMOOTHING_SUPPORTED - fprintf(stderr, " -smooth N Smooth dithered input (N=1..100 is strength)\n"); -#endif - fprintf(stderr, " -maxmemory N Maximum memory to use (in kbytes)\n"); - fprintf(stderr, " -outfile name Specify name for output file\n"); - fprintf(stderr, " -verbose or -debug Emit debug output\n"); - fprintf(stderr, "Switches for wizards:\n"); - fprintf(stderr, " -baseline Force baseline quantization tables\n"); - fprintf(stderr, " -qtables file Use quantization tables given in file\n"); - fprintf(stderr, " -qslots N[,...] Set component quantization tables\n"); - fprintf(stderr, " -sample HxV[,...] Set component sampling factors\n"); -#ifdef C_MULTISCAN_FILES_SUPPORTED - fprintf(stderr, " -scans file Create multi-scan JPEG per script file\n"); -#endif - exit(EXIT_FAILURE); -} - - -LOCAL(int) -parse_switches (j_compress_ptr cinfo, int argc, char **argv, - int last_file_arg_seen, boolean for_real) -/* Parse optional switches. - * Returns argv[] index of first file-name argument (== argc if none). - * Any file names with indexes <= last_file_arg_seen are ignored; - * they have presumably been processed in a previous iteration. - * (Pass 0 for last_file_arg_seen on the first or only iteration.) - * for_real is FALSE on the first (dummy) pass; we may skip any expensive - * processing. - */ -{ - int argn; - char * arg; - boolean force_baseline; - boolean simple_progressive; - char * qualityarg = NULL; /* saves -quality parm if any */ - char * qtablefile = NULL; /* saves -qtables filename if any */ - char * qslotsarg = NULL; /* saves -qslots parm if any */ - char * samplearg = NULL; /* saves -sample parm if any */ - char * scansarg = NULL; /* saves -scans parm if any */ - - /* Set up default JPEG parameters. */ - - force_baseline = FALSE; /* by default, allow 16-bit quantizers */ - simple_progressive = FALSE; - is_targa = FALSE; - outfilename = NULL; - cinfo->err->trace_level = 0; - - /* Scan command line options, adjust parameters */ - - for (argn = 1; argn < argc; argn++) { - arg = argv[argn]; - if (*arg != '-') { - /* Not a switch, must be a file name argument */ - if (argn <= last_file_arg_seen) { - outfilename = NULL; /* -outfile applies to just one input file */ - continue; /* ignore this name if previously processed */ - } - break; /* else done parsing switches */ - } - arg++; /* advance past switch marker character */ - - if (keymatch(arg, "arithmetic", 1)) { - /* Use arithmetic coding. */ -#ifdef C_ARITH_CODING_SUPPORTED - cinfo->arith_code = TRUE; -#else - fprintf(stderr, "%s: sorry, arithmetic coding not supported\n", - progname); - exit(EXIT_FAILURE); -#endif - - } else if (keymatch(arg, "baseline", 2)) { - /* Force baseline-compatible output (8-bit quantizer values). */ - force_baseline = TRUE; - - } else if (keymatch(arg, "block", 2)) { - /* Set DCT block size. */ -#if defined DCT_SCALING_SUPPORTED && JPEG_LIB_VERSION_MAJOR >= 8 && \ - (JPEG_LIB_VERSION_MAJOR > 8 || JPEG_LIB_VERSION_MINOR >= 3) - int val; - - if (++argn >= argc) /* advance to next argument */ - usage(); - if (sscanf(argv[argn], "%d", &val) != 1) - usage(); - if (val < 1 || val > 16) - usage(); - cinfo->block_size = val; -#else - fprintf(stderr, "%s: sorry, block size setting not supported\n", - progname); - exit(EXIT_FAILURE); -#endif - - } else if (keymatch(arg, "dct", 2)) { - /* Select DCT algorithm. */ - if (++argn >= argc) /* advance to next argument */ - usage(); - if (keymatch(argv[argn], "int", 1)) { - cinfo->dct_method = JDCT_ISLOW; - } else if (keymatch(argv[argn], "fast", 2)) { - cinfo->dct_method = JDCT_IFAST; - } else if (keymatch(argv[argn], "float", 2)) { - cinfo->dct_method = JDCT_FLOAT; - } else - usage(); - - } else if (keymatch(arg, "debug", 1) || keymatch(arg, "verbose", 1)) { - /* Enable debug printouts. */ - /* On first -d, print version identification */ - static boolean printed_version = FALSE; - - if (! printed_version) { - fprintf(stderr, "Independent JPEG Group's CJPEG, version %s\n%s\n", - JVERSION, JCOPYRIGHT); - printed_version = TRUE; - } - cinfo->err->trace_level++; - - } else if (keymatch(arg, "grayscale", 2) || keymatch(arg, "greyscale",2)) { - /* Force a monochrome JPEG file to be generated. */ - jpeg_set_colorspace(cinfo, JCS_GRAYSCALE); - - } else if (keymatch(arg, "rgb", 3)) { - /* Force an RGB JPEG file to be generated. */ - jpeg_set_colorspace(cinfo, JCS_RGB); - - } else if (keymatch(arg, "maxmemory", 3)) { - /* Maximum memory in Kb (or Mb with 'm'). */ - long lval; - char ch = 'x'; - - if (++argn >= argc) /* advance to next argument */ - usage(); - if (sscanf(argv[argn], "%ld%c", &lval, &ch) < 1) - usage(); - if (ch == 'm' || ch == 'M') - lval *= 1000L; - cinfo->mem->max_memory_to_use = lval * 1000L; - - } else if (keymatch(arg, "nosmooth", 3)) { - /* Suppress fancy downsampling */ - cinfo->do_fancy_downsampling = FALSE; - - } else if (keymatch(arg, "optimize", 1) || keymatch(arg, "optimise", 1)) { - /* Enable entropy parm optimization. */ -#ifdef ENTROPY_OPT_SUPPORTED - cinfo->optimize_coding = TRUE; -#else - fprintf(stderr, "%s: sorry, entropy optimization was not compiled\n", - progname); - exit(EXIT_FAILURE); -#endif - - } else if (keymatch(arg, "outfile", 4)) { - /* Set output file name. */ - if (++argn >= argc) /* advance to next argument */ - usage(); - outfilename = argv[argn]; /* save it away for later use */ - - } else if (keymatch(arg, "progressive", 1)) { - /* Select simple progressive mode. */ -#ifdef C_PROGRESSIVE_SUPPORTED - simple_progressive = TRUE; - /* We must postpone execution until num_components is known. */ -#else - fprintf(stderr, "%s: sorry, progressive output was not compiled\n", - progname); - exit(EXIT_FAILURE); -#endif - - } else if (keymatch(arg, "quality", 1)) { - /* Quality ratings (quantization table scaling factors). */ - if (++argn >= argc) /* advance to next argument */ - usage(); - qualityarg = argv[argn]; - - } else if (keymatch(arg, "qslots", 2)) { - /* Quantization table slot numbers. */ - if (++argn >= argc) /* advance to next argument */ - usage(); - qslotsarg = argv[argn]; - /* Must delay setting qslots until after we have processed any - * colorspace-determining switches, since jpeg_set_colorspace sets - * default quant table numbers. - */ - - } else if (keymatch(arg, "qtables", 2)) { - /* Quantization tables fetched from file. */ - if (++argn >= argc) /* advance to next argument */ - usage(); - qtablefile = argv[argn]; - /* We postpone actually reading the file in case -quality comes later. */ - - } else if (keymatch(arg, "restart", 1)) { - /* Restart interval in MCU rows (or in MCUs with 'b'). */ - long lval; - char ch = 'x'; - - if (++argn >= argc) /* advance to next argument */ - usage(); - if (sscanf(argv[argn], "%ld%c", &lval, &ch) < 1) - usage(); - if (lval < 0 || lval > 65535L) - usage(); - if (ch == 'b' || ch == 'B') { - cinfo->restart_interval = (unsigned int) lval; - cinfo->restart_in_rows = 0; /* else prior '-restart n' overrides me */ - } else { - cinfo->restart_in_rows = (int) lval; - /* restart_interval will be computed during startup */ - } - - } else if (keymatch(arg, "sample", 2)) { - /* Set sampling factors. */ - if (++argn >= argc) /* advance to next argument */ - usage(); - samplearg = argv[argn]; - /* Must delay setting sample factors until after we have processed any - * colorspace-determining switches, since jpeg_set_colorspace sets - * default sampling factors. - */ - - } else if (keymatch(arg, "scale", 4)) { - /* Scale the image by a fraction M/N. */ - if (++argn >= argc) /* advance to next argument */ - usage(); - if (sscanf(argv[argn], "%d/%d", - &cinfo->scale_num, &cinfo->scale_denom) != 2) - usage(); - - } else if (keymatch(arg, "scans", 4)) { - /* Set scan script. */ -#ifdef C_MULTISCAN_FILES_SUPPORTED - if (++argn >= argc) /* advance to next argument */ - usage(); - scansarg = argv[argn]; - /* We must postpone reading the file in case -progressive appears. */ -#else - fprintf(stderr, "%s: sorry, multi-scan output was not compiled\n", - progname); - exit(EXIT_FAILURE); -#endif - - } else if (keymatch(arg, "smooth", 2)) { - /* Set input smoothing factor. */ - int val; - - if (++argn >= argc) /* advance to next argument */ - usage(); - if (sscanf(argv[argn], "%d", &val) != 1) - usage(); - if (val < 0 || val > 100) - usage(); - cinfo->smoothing_factor = val; - - } else if (keymatch(arg, "targa", 1)) { - /* Input file is Targa format. */ - is_targa = TRUE; - - } else { - usage(); /* bogus switch */ - } - } - - /* Post-switch-scanning cleanup */ - - if (for_real) { - - /* Set quantization tables for selected quality. */ - /* Some or all may be overridden if -qtables is present. */ - if (qualityarg != NULL) /* process -quality if it was present */ - if (! set_quality_ratings(cinfo, qualityarg, force_baseline)) - usage(); - - if (qtablefile != NULL) /* process -qtables if it was present */ - if (! read_quant_tables(cinfo, qtablefile, force_baseline)) - usage(); - - if (qslotsarg != NULL) /* process -qslots if it was present */ - if (! set_quant_slots(cinfo, qslotsarg)) - usage(); - - if (samplearg != NULL) /* process -sample if it was present */ - if (! set_sample_factors(cinfo, samplearg)) - usage(); - -#ifdef C_PROGRESSIVE_SUPPORTED - if (simple_progressive) /* process -progressive; -scans can override */ - jpeg_simple_progression(cinfo); -#endif - -#ifdef C_MULTISCAN_FILES_SUPPORTED - if (scansarg != NULL) /* process -scans if it was present */ - if (! read_scan_script(cinfo, scansarg)) - usage(); -#endif - } - - return argn; /* return index of next arg (file name) */ -} - - -/* - * The main program. - */ - -int -main (int argc, char **argv) -{ - struct jpeg_compress_struct cinfo; - struct jpeg_error_mgr jerr; -#ifdef PROGRESS_REPORT - struct cdjpeg_progress_mgr progress; -#endif - int file_index; - cjpeg_source_ptr src_mgr; - FILE * input_file; - FILE * output_file; - JDIMENSION num_scanlines; - - /* On Mac, fetch a command line. */ -#ifdef USE_CCOMMAND - argc = ccommand(&argv); -#endif - - progname = argv[0]; - if (progname == NULL || progname[0] == 0) - progname = "cjpeg"; /* in case C library doesn't provide it */ - - /* Initialize the JPEG compression object with default error handling. */ - cinfo.err = jpeg_std_error(&jerr); - jpeg_create_compress(&cinfo); - /* Add some application-specific error messages (from cderror.h) */ - jerr.addon_message_table = cdjpeg_message_table; - jerr.first_addon_message = JMSG_FIRSTADDONCODE; - jerr.last_addon_message = JMSG_LASTADDONCODE; - - /* Now safe to enable signal catcher. */ -#ifdef NEED_SIGNAL_CATCHER - enable_signal_catcher((j_common_ptr) &cinfo); -#endif - - /* Initialize JPEG parameters. - * Much of this may be overridden later. - * In particular, we don't yet know the input file's color space, - * but we need to provide some value for jpeg_set_defaults() to work. - */ - - cinfo.in_color_space = JCS_RGB; /* arbitrary guess */ - jpeg_set_defaults(&cinfo); - - /* Scan command line to find file names. - * It is convenient to use just one switch-parsing routine, but the switch - * values read here are ignored; we will rescan the switches after opening - * the input file. - */ - - file_index = parse_switches(&cinfo, argc, argv, 0, FALSE); - -#ifdef TWO_FILE_COMMANDLINE - /* Must have either -outfile switch or explicit output file name */ - if (outfilename == NULL) { - if (file_index != argc-2) { - fprintf(stderr, "%s: must name one input and one output file\n", - progname); - usage(); - } - outfilename = argv[file_index+1]; - } else { - if (file_index != argc-1) { - fprintf(stderr, "%s: must name one input and one output file\n", - progname); - usage(); - } - } -#else - /* Unix style: expect zero or one file name */ - if (file_index < argc-1) { - fprintf(stderr, "%s: only one input file\n", progname); - usage(); - } -#endif /* TWO_FILE_COMMANDLINE */ - - /* Open the input file. */ - if (file_index < argc) { - if ((input_file = fopen(argv[file_index], READ_BINARY)) == NULL) { - fprintf(stderr, "%s: can't open %s\n", progname, argv[file_index]); - exit(EXIT_FAILURE); - } - } else { - /* default input file is stdin */ - input_file = read_stdin(); - } - - /* Open the output file. */ - if (outfilename != NULL) { - if ((output_file = fopen(outfilename, WRITE_BINARY)) == NULL) { - fprintf(stderr, "%s: can't open %s\n", progname, outfilename); - exit(EXIT_FAILURE); - } - } else { - /* default output file is stdout */ - output_file = write_stdout(); - } - -#ifdef PROGRESS_REPORT - start_progress_monitor((j_common_ptr) &cinfo, &progress); -#endif - - /* Figure out the input file format, and set up to read it. */ - src_mgr = select_file_type(&cinfo, input_file); - src_mgr->input_file = input_file; - - /* Read the input file header to obtain file size & colorspace. */ - (*src_mgr->start_input) (&cinfo, src_mgr); - - /* Now that we know input colorspace, fix colorspace-dependent defaults */ - jpeg_default_colorspace(&cinfo); - - /* Adjust default compression parameters by re-parsing the options */ - file_index = parse_switches(&cinfo, argc, argv, 0, TRUE); - - /* Specify data destination for compression */ - jpeg_stdio_dest(&cinfo, output_file); - - /* Start compressor */ - jpeg_start_compress(&cinfo, TRUE); - - /* Process data */ - while (cinfo.next_scanline < cinfo.image_height) { - num_scanlines = (*src_mgr->get_pixel_rows) (&cinfo, src_mgr); - (void) jpeg_write_scanlines(&cinfo, src_mgr->buffer, num_scanlines); - } - - /* Finish compression and release memory */ - (*src_mgr->finish_input) (&cinfo, src_mgr); - jpeg_finish_compress(&cinfo); - jpeg_destroy_compress(&cinfo); - - /* Close files, if we opened them */ - if (input_file != stdin) - fclose(input_file); - if (output_file != stdout) - fclose(output_file); - -#ifdef PROGRESS_REPORT - end_progress_monitor((j_common_ptr) &cinfo); -#endif - - /* All done. */ - exit(jerr.num_warnings ? EXIT_WARNING : EXIT_SUCCESS); - return 0; /* suppress no-return-value warnings */ -} diff --git a/jpeg/ckconfig.c b/jpeg/ckconfig.c deleted file mode 100755 index e658623..0000000 --- a/jpeg/ckconfig.c +++ /dev/null @@ -1,402 +0,0 @@ -/* - * ckconfig.c - * - * Copyright (C) 1991-1994, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - */ - -/* - * This program is intended to help you determine how to configure the JPEG - * software for installation on a particular system. The idea is to try to - * compile and execute this program. If your compiler fails to compile the - * program, make changes as indicated in the comments below. Once you can - * compile the program, run it, and it will produce a "jconfig.h" file for - * your system. - * - * As a general rule, each time you try to compile this program, - * pay attention only to the *first* error message you get from the compiler. - * Many C compilers will issue lots of spurious error messages once they - * have gotten confused. Go to the line indicated in the first error message, - * and read the comments preceding that line to see what to change. - * - * Almost all of the edits you may need to make to this program consist of - * changing a line that reads "#define SOME_SYMBOL" to "#undef SOME_SYMBOL", - * or vice versa. This is called defining or undefining that symbol. - */ - - -/* First we must see if your system has the include files we need. - * We start out with the assumption that your system has all the ANSI-standard - * include files. If you get any error trying to include one of these files, - * undefine the corresponding HAVE_xxx symbol. - */ - -#define HAVE_STDDEF_H /* replace 'define' by 'undef' if error here */ -#ifdef HAVE_STDDEF_H /* next line will be skipped if you undef... */ -#include -#endif - -#define HAVE_STDLIB_H /* same thing for stdlib.h */ -#ifdef HAVE_STDLIB_H -#include -#endif - -#include /* If you ain't got this, you ain't got C. */ - -/* We have to see if your string functions are defined by - * strings.h (old BSD convention) or string.h (everybody else). - * We try the non-BSD convention first; define NEED_BSD_STRINGS - * if the compiler says it can't find string.h. - */ - -#undef NEED_BSD_STRINGS - -#ifdef NEED_BSD_STRINGS -#include -#else -#include -#endif - -/* On some systems (especially older Unix machines), type size_t is - * defined only in the include file . If you get a failure - * on the size_t test below, try defining NEED_SYS_TYPES_H. - */ - -#undef NEED_SYS_TYPES_H /* start by assuming we don't need it */ -#ifdef NEED_SYS_TYPES_H -#include -#endif - - -/* Usually type size_t is defined in one of the include files we've included - * above. If not, you'll get an error on the "typedef size_t my_size_t;" line. - * In that case, first try defining NEED_SYS_TYPES_H just above. - * If that doesn't work, you'll have to search through your system library - * to figure out which include file defines "size_t". Look for a line that - * says "typedef something-or-other size_t;". Then, change the line below - * that says "#include " to instead include the file - * you found size_t in, and define NEED_SPECIAL_INCLUDE. If you can't find - * type size_t anywhere, try replacing "#include " with - * "typedef unsigned int size_t;". - */ - -#undef NEED_SPECIAL_INCLUDE /* assume we DON'T need it, for starters */ - -#ifdef NEED_SPECIAL_INCLUDE -#include -#endif - -typedef size_t my_size_t; /* The payoff: do we have size_t now? */ - - -/* The next question is whether your compiler supports ANSI-style function - * prototypes. You need to know this in order to choose between using - * makefile.ansi and using makefile.unix. - * The #define line below is set to assume you have ANSI function prototypes. - * If you get an error in this group of lines, undefine HAVE_PROTOTYPES. - */ - -#define HAVE_PROTOTYPES - -#ifdef HAVE_PROTOTYPES -int testfunction (int arg1, int * arg2); /* check prototypes */ - -struct methods_struct { /* check method-pointer declarations */ - int (*error_exit) (char *msgtext); - int (*trace_message) (char *msgtext); - int (*another_method) (void); -}; - -int testfunction (int arg1, int * arg2) /* check definitions */ -{ - return arg2[arg1]; -} - -int test2function (void) /* check void arg list */ -{ - return 0; -} -#endif - - -/* Now we want to find out if your compiler knows what "unsigned char" means. - * If you get an error on the "unsigned char un_char;" line, - * then undefine HAVE_UNSIGNED_CHAR. - */ - -#define HAVE_UNSIGNED_CHAR - -#ifdef HAVE_UNSIGNED_CHAR -unsigned char un_char; -#endif - - -/* Now we want to find out if your compiler knows what "unsigned short" means. - * If you get an error on the "unsigned short un_short;" line, - * then undefine HAVE_UNSIGNED_SHORT. - */ - -#define HAVE_UNSIGNED_SHORT - -#ifdef HAVE_UNSIGNED_SHORT -unsigned short un_short; -#endif - - -/* Now we want to find out if your compiler understands type "void". - * If you get an error anywhere in here, undefine HAVE_VOID. - */ - -#define HAVE_VOID - -#ifdef HAVE_VOID -/* Caution: a C++ compiler will insist on complete prototypes */ -typedef void * void_ptr; /* check void * */ -#ifdef HAVE_PROTOTYPES /* check ptr to function returning void */ -typedef void (*void_func) (int a, int b); -#else -typedef void (*void_func) (); -#endif - -#ifdef HAVE_PROTOTYPES /* check void function result */ -void test3function (void_ptr arg1, void_func arg2) -#else -void test3function (arg1, arg2) - void_ptr arg1; - void_func arg2; -#endif -{ - char * locptr = (char *) arg1; /* check casting to and from void * */ - arg1 = (void *) locptr; - (*arg2) (1, 2); /* check call of fcn returning void */ -} -#endif - - -/* Now we want to find out if your compiler knows what "const" means. - * If you get an error here, undefine HAVE_CONST. - */ - -#define HAVE_CONST - -#ifdef HAVE_CONST -static const int carray[3] = {1, 2, 3}; - -#ifdef HAVE_PROTOTYPES -int test4function (const int arg1) -#else -int test4function (arg1) - const int arg1; -#endif -{ - return carray[arg1]; -} -#endif - - -/* If you get an error or warning about this structure definition, - * define INCOMPLETE_TYPES_BROKEN. - */ - -#undef INCOMPLETE_TYPES_BROKEN - -#ifndef INCOMPLETE_TYPES_BROKEN -typedef struct undefined_structure * undef_struct_ptr; -#endif - - -/* If you get an error about duplicate names, - * define NEED_SHORT_EXTERNAL_NAMES. - */ - -#undef NEED_SHORT_EXTERNAL_NAMES - -#ifndef NEED_SHORT_EXTERNAL_NAMES - -int possibly_duplicate_function () -{ - return 0; -} - -int possibly_dupli_function () -{ - return 1; -} - -#endif - - - -/************************************************************************ - * OK, that's it. You should not have to change anything beyond this - * point in order to compile and execute this program. (You might get - * some warnings, but you can ignore them.) - * When you run the program, it will make a couple more tests that it - * can do automatically, and then it will create jconfig.h and print out - * any additional suggestions it has. - ************************************************************************ - */ - - -#ifdef HAVE_PROTOTYPES -int is_char_signed (int arg) -#else -int is_char_signed (arg) - int arg; -#endif -{ - if (arg == 189) { /* expected result for unsigned char */ - return 0; /* type char is unsigned */ - } - else if (arg != -67) { /* expected result for signed char */ - printf("Hmm, it seems 'char' is not eight bits wide on your machine.\n"); - printf("I fear the JPEG software will not work at all.\n\n"); - } - return 1; /* assume char is signed otherwise */ -} - - -#ifdef HAVE_PROTOTYPES -int is_shifting_signed (long arg) -#else -int is_shifting_signed (arg) - long arg; -#endif -/* See whether right-shift on a long is signed or not. */ -{ - long res = arg >> 4; - - if (res == -0x7F7E80CL) { /* expected result for signed shift */ - return 1; /* right shift is signed */ - } - /* see if unsigned-shift hack will fix it. */ - /* we can't just test exact value since it depends on width of long... */ - res |= (~0L) << (32-4); - if (res == -0x7F7E80CL) { /* expected result now? */ - return 0; /* right shift is unsigned */ - } - printf("Right shift isn't acting as I expect it to.\n"); - printf("I fear the JPEG software will not work at all.\n\n"); - return 0; /* try it with unsigned anyway */ -} - - -#ifdef HAVE_PROTOTYPES -int main (int argc, char ** argv) -#else -int main (argc, argv) - int argc; - char ** argv; -#endif -{ - char signed_char_check = (char) (-67); - FILE *outfile; - - /* Attempt to write jconfig.h */ - if ((outfile = fopen("jconfig.h", "w")) == NULL) { - printf("Failed to write jconfig.h\n"); - return 1; - } - - /* Write out all the info */ - fprintf(outfile, "/* jconfig.h --- generated by ckconfig.c */\n"); - fprintf(outfile, "/* see jconfig.txt for explanations */\n\n"); -#ifdef HAVE_PROTOTYPES - fprintf(outfile, "#define HAVE_PROTOTYPES\n"); -#else - fprintf(outfile, "#undef HAVE_PROTOTYPES\n"); -#endif -#ifdef HAVE_UNSIGNED_CHAR - fprintf(outfile, "#define HAVE_UNSIGNED_CHAR\n"); -#else - fprintf(outfile, "#undef HAVE_UNSIGNED_CHAR\n"); -#endif -#ifdef HAVE_UNSIGNED_SHORT - fprintf(outfile, "#define HAVE_UNSIGNED_SHORT\n"); -#else - fprintf(outfile, "#undef HAVE_UNSIGNED_SHORT\n"); -#endif -#ifdef HAVE_VOID - fprintf(outfile, "/* #define void char */\n"); -#else - fprintf(outfile, "#define void char\n"); -#endif -#ifdef HAVE_CONST - fprintf(outfile, "/* #define const */\n"); -#else - fprintf(outfile, "#define const\n"); -#endif - if (is_char_signed((int) signed_char_check)) - fprintf(outfile, "#undef CHAR_IS_UNSIGNED\n"); - else - fprintf(outfile, "#define CHAR_IS_UNSIGNED\n"); -#ifdef HAVE_STDDEF_H - fprintf(outfile, "#define HAVE_STDDEF_H\n"); -#else - fprintf(outfile, "#undef HAVE_STDDEF_H\n"); -#endif -#ifdef HAVE_STDLIB_H - fprintf(outfile, "#define HAVE_STDLIB_H\n"); -#else - fprintf(outfile, "#undef HAVE_STDLIB_H\n"); -#endif -#ifdef NEED_BSD_STRINGS - fprintf(outfile, "#define NEED_BSD_STRINGS\n"); -#else - fprintf(outfile, "#undef NEED_BSD_STRINGS\n"); -#endif -#ifdef NEED_SYS_TYPES_H - fprintf(outfile, "#define NEED_SYS_TYPES_H\n"); -#else - fprintf(outfile, "#undef NEED_SYS_TYPES_H\n"); -#endif - fprintf(outfile, "#undef NEED_FAR_POINTERS\n"); -#ifdef NEED_SHORT_EXTERNAL_NAMES - fprintf(outfile, "#define NEED_SHORT_EXTERNAL_NAMES\n"); -#else - fprintf(outfile, "#undef NEED_SHORT_EXTERNAL_NAMES\n"); -#endif -#ifdef INCOMPLETE_TYPES_BROKEN - fprintf(outfile, "#define INCOMPLETE_TYPES_BROKEN\n"); -#else - fprintf(outfile, "#undef INCOMPLETE_TYPES_BROKEN\n"); -#endif - fprintf(outfile, "\n#ifdef JPEG_INTERNALS\n\n"); - if (is_shifting_signed(-0x7F7E80B1L)) - fprintf(outfile, "#undef RIGHT_SHIFT_IS_UNSIGNED\n"); - else - fprintf(outfile, "#define RIGHT_SHIFT_IS_UNSIGNED\n"); - fprintf(outfile, "\n#endif /* JPEG_INTERNALS */\n"); - fprintf(outfile, "\n#ifdef JPEG_CJPEG_DJPEG\n\n"); - fprintf(outfile, "#define BMP_SUPPORTED /* BMP image file format */\n"); - fprintf(outfile, "#define GIF_SUPPORTED /* GIF image file format */\n"); - fprintf(outfile, "#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */\n"); - fprintf(outfile, "#undef RLE_SUPPORTED /* Utah RLE image file format */\n"); - fprintf(outfile, "#define TARGA_SUPPORTED /* Targa image file format */\n\n"); - fprintf(outfile, "#undef TWO_FILE_COMMANDLINE /* You may need this on non-Unix systems */\n"); - fprintf(outfile, "#undef NEED_SIGNAL_CATCHER /* Define this if you use jmemname.c */\n"); - fprintf(outfile, "#undef DONT_USE_B_MODE\n"); - fprintf(outfile, "/* #define PROGRESS_REPORT */ /* optional */\n"); - fprintf(outfile, "\n#endif /* JPEG_CJPEG_DJPEG */\n"); - - /* Close the jconfig.h file */ - fclose(outfile); - - /* User report */ - printf("Configuration check for Independent JPEG Group's software done.\n"); - printf("\nI have written the jconfig.h file for you.\n\n"); -#ifdef HAVE_PROTOTYPES - printf("You should use makefile.ansi as the starting point for your Makefile.\n"); -#else - printf("You should use makefile.unix as the starting point for your Makefile.\n"); -#endif - -#ifdef NEED_SPECIAL_INCLUDE - printf("\nYou'll need to change jconfig.h to include the system include file\n"); - printf("that you found type size_t in, or add a direct definition of type\n"); - printf("size_t if that's what you used. Just add it to the end.\n"); -#endif - - return 0; -} diff --git a/jpeg/coderules.txt b/jpeg/coderules.txt deleted file mode 100755 index 357929f..0000000 --- a/jpeg/coderules.txt +++ /dev/null @@ -1,118 +0,0 @@ -IJG JPEG LIBRARY: CODING RULES - -Copyright (C) 1991-1996, Thomas G. Lane. -This file is part of the Independent JPEG Group's software. -For conditions of distribution and use, see the accompanying README file. - - -Since numerous people will be contributing code and bug fixes, it's important -to establish a common coding style. The goal of using similar coding styles -is much more important than the details of just what that style is. - -In general we follow the recommendations of "Recommended C Style and Coding -Standards" revision 6.1 (Cannon et al. as modified by Spencer, Keppel and -Brader). This document is available in the IJG FTP archive (see -jpeg/doc/cstyle.ms.tbl.Z, or cstyle.txt.Z for those without nroff/tbl). - -Block comments should be laid out thusly: - -/* - * Block comments in this style. - */ - -We indent statements in K&R style, e.g., - if (test) { - then-part; - } else { - else-part; - } -with two spaces per indentation level. (This indentation convention is -handled automatically by GNU Emacs and many other text editors.) - -Multi-word names should be written in lower case with underscores, e.g., -multi_word_name (not multiWordName). Preprocessor symbols and enum constants -are similar but upper case (MULTI_WORD_NAME). Names should be unique within -the first fifteen characters. (On some older systems, global names must be -unique within six characters. We accommodate this without cluttering the -source code by using macros to substitute shorter names.) - -We use function prototypes everywhere; we rely on automatic source code -transformation to feed prototype-less C compilers. Transformation is done -by the simple and portable tool 'ansi2knr.c' (courtesy of Ghostscript). -ansi2knr is not very bright, so it imposes a format requirement on function -declarations: the function name MUST BEGIN IN COLUMN 1. Thus all functions -should be written in the following style: - -LOCAL(int *) -function_name (int a, char *b) -{ - code... -} - -Note that each function definition must begin with GLOBAL(type), LOCAL(type), -or METHODDEF(type). These macros expand to "static type" or just "type" as -appropriate. They provide a readable indication of the routine's usage and -can readily be changed for special needs. (For instance, special linkage -keywords can be inserted for use in Windows DLLs.) - -ansi2knr does not transform method declarations (function pointers in -structs). We handle these with a macro JMETHOD, defined as - #ifdef HAVE_PROTOTYPES - #define JMETHOD(type,methodname,arglist) type (*methodname) arglist - #else - #define JMETHOD(type,methodname,arglist) type (*methodname) () - #endif -which is used like this: - struct function_pointers { - JMETHOD(void, init_entropy_encoder, (int somearg, jparms *jp)); - JMETHOD(void, term_entropy_encoder, (void)); - }; -Note the set of parentheses surrounding the parameter list. - -A similar solution is used for forward and external function declarations -(see the EXTERN and JPP macros). - -If the code is to work on non-ANSI compilers, we cannot rely on a prototype -declaration to coerce actual parameters into the right types. Therefore, use -explicit casts on actual parameters whenever the actual parameter type is not -identical to the formal parameter. Beware of implicit conversions to "int". - -It seems there are some non-ANSI compilers in which the sizeof() operator -is defined to return int, yet size_t is defined as long. Needless to say, -this is brain-damaged. Always use the SIZEOF() macro in place of sizeof(), -so that the result is guaranteed to be of type size_t. - - -The JPEG library is intended to be used within larger programs. Furthermore, -we want it to be reentrant so that it can be used by applications that process -multiple images concurrently. The following rules support these requirements: - -1. Avoid direct use of file I/O, "malloc", error report printouts, etc; -pass these through the common routines provided. - -2. Minimize global namespace pollution. Functions should be declared static -wherever possible. (Note that our method-based calling conventions help this -a lot: in many modules only the initialization function will ever need to be -called directly, so only that function need be externally visible.) All -global function names should begin with "jpeg_", and should have an -abbreviated name (unique in the first six characters) substituted by macro -when NEED_SHORT_EXTERNAL_NAMES is set. - -3. Don't use global variables; anything that must be used in another module -should be in the common data structures. - -4. Don't use static variables except for read-only constant tables. Variables -that should be private to a module can be placed into private structures (see -the system architecture document, structure.txt). - -5. Source file names should begin with "j" for files that are part of the -library proper; source files that are not part of the library, such as cjpeg.c -and djpeg.c, do not begin with "j". Keep source file names to eight -characters (plus ".c" or ".h", etc) to make life easy for MS-DOSers. Keep -compression and decompression code in separate source files --- some -applications may want only one half of the library. - -Note: these rules (particularly #4) are not followed religiously in the -modules that are used in cjpeg/djpeg but are not part of the JPEG library -proper. Those modules are not really intended to be used in other -applications. diff --git a/jpeg/config.guess b/jpeg/config.guess deleted file mode 100755 index 8152efd..0000000 --- a/jpeg/config.guess +++ /dev/null @@ -1,1522 +0,0 @@ -#! /bin/sh -# Attempt to guess a canonical system name. -# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, -# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, -# 2011 Free Software Foundation, Inc. - -timestamp='2011-11-11' - -# This file is free software; you can redistribute it and/or modify it -# under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA -# 02110-1301, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - - -# Originally written by Per Bothner. Please send patches (context -# diff format) to and include a ChangeLog -# entry. -# -# This script attempts to guess a canonical system name similar to -# config.sub. If it succeeds, it prints the system name on stdout, and -# exits with 0. Otherwise, it exits with 1. -# -# You can get the latest version of this script from: -# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD - -me=`echo "$0" | sed -e 's,.*/,,'` - -usage="\ -Usage: $0 [OPTION] - -Output the configuration name of the system \`$me' is run on. - -Operation modes: - -h, --help print this help, then exit - -t, --time-stamp print date of last modification, then exit - -v, --version print version number, then exit - -Report bugs and patches to ." - -version="\ -GNU config.guess ($timestamp) - -Originally written by Per Bothner. -Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, -2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free -Software Foundation, Inc. - -This is free software; see the source for copying conditions. There is NO -warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." - -help=" -Try \`$me --help' for more information." - -# Parse command line -while test $# -gt 0 ; do - case $1 in - --time-stamp | --time* | -t ) - echo "$timestamp" ; exit ;; - --version | -v ) - echo "$version" ; exit ;; - --help | --h* | -h ) - echo "$usage"; exit ;; - -- ) # Stop option processing - shift; break ;; - - ) # Use stdin as input. - break ;; - -* ) - echo "$me: invalid option $1$help" >&2 - exit 1 ;; - * ) - break ;; - esac -done - -if test $# != 0; then - echo "$me: too many arguments$help" >&2 - exit 1 -fi - -trap 'exit 1' 1 2 15 - -# CC_FOR_BUILD -- compiler used by this script. Note that the use of a -# compiler to aid in system detection is discouraged as it requires -# temporary files to be created and, as you can see below, it is a -# headache to deal with in a portable fashion. - -# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still -# use `HOST_CC' if defined, but it is deprecated. - -# Portable tmp directory creation inspired by the Autoconf team. - -set_cc_for_build=' -trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; -trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; -: ${TMPDIR=/tmp} ; - { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || - { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || - { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } || - { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ; -dummy=$tmp/dummy ; -tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ; -case $CC_FOR_BUILD,$HOST_CC,$CC in - ,,) echo "int x;" > $dummy.c ; - for c in cc gcc c89 c99 ; do - if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then - CC_FOR_BUILD="$c"; break ; - fi ; - done ; - if test x"$CC_FOR_BUILD" = x ; then - CC_FOR_BUILD=no_compiler_found ; - fi - ;; - ,,*) CC_FOR_BUILD=$CC ;; - ,*,*) CC_FOR_BUILD=$HOST_CC ;; -esac ; set_cc_for_build= ;' - -# This is needed to find uname on a Pyramid OSx when run in the BSD universe. -# (ghazi@noc.rutgers.edu 1994-08-24) -if (test -f /.attbin/uname) >/dev/null 2>&1 ; then - PATH=$PATH:/.attbin ; export PATH -fi - -UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown -UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown -UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown -UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown - -# Note: order is significant - the case branches are not exclusive. - -case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in - *:NetBSD:*:*) - # NetBSD (nbsd) targets should (where applicable) match one or - # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*, - # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently - # switched to ELF, *-*-netbsd* would select the old - # object file format. This provides both forward - # compatibility and a consistent mechanism for selecting the - # object file format. - # - # Note: NetBSD doesn't particularly care about the vendor - # portion of the name. We always set it to "unknown". - sysctl="sysctl -n hw.machine_arch" - UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \ - /usr/sbin/$sysctl 2>/dev/null || echo unknown)` - case "${UNAME_MACHINE_ARCH}" in - armeb) machine=armeb-unknown ;; - arm*) machine=arm-unknown ;; - sh3el) machine=shl-unknown ;; - sh3eb) machine=sh-unknown ;; - sh5el) machine=sh5le-unknown ;; - *) machine=${UNAME_MACHINE_ARCH}-unknown ;; - esac - # The Operating System including object format, if it has switched - # to ELF recently, or will in the future. - case "${UNAME_MACHINE_ARCH}" in - arm*|i386|m68k|ns32k|sh3*|sparc|vax) - eval $set_cc_for_build - if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ - | grep -q __ELF__ - then - # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). - # Return netbsd for either. FIX? - os=netbsd - else - os=netbsdelf - fi - ;; - *) - os=netbsd - ;; - esac - # The OS release - # Debian GNU/NetBSD machines have a different userland, and - # thus, need a distinct triplet. However, they do not need - # kernel version information, so it can be replaced with a - # suitable tag, in the style of linux-gnu. - case "${UNAME_VERSION}" in - Debian*) - release='-gnu' - ;; - *) - release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` - ;; - esac - # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: - # contains redundant information, the shorter form: - # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. - echo "${machine}-${os}${release}" - exit ;; - *:OpenBSD:*:*) - UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` - echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE} - exit ;; - *:ekkoBSD:*:*) - echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE} - exit ;; - *:SolidBSD:*:*) - echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE} - exit ;; - macppc:MirBSD:*:*) - echo powerpc-unknown-mirbsd${UNAME_RELEASE} - exit ;; - *:MirBSD:*:*) - echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE} - exit ;; - alpha:OSF1:*:*) - case $UNAME_RELEASE in - *4.0) - UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` - ;; - *5.*) - UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` - ;; - esac - # According to Compaq, /usr/sbin/psrinfo has been available on - # OSF/1 and Tru64 systems produced since 1995. I hope that - # covers most systems running today. This code pipes the CPU - # types through head -n 1, so we only detect the type of CPU 0. - ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` - case "$ALPHA_CPU_TYPE" in - "EV4 (21064)") - UNAME_MACHINE="alpha" ;; - "EV4.5 (21064)") - UNAME_MACHINE="alpha" ;; - "LCA4 (21066/21068)") - UNAME_MACHINE="alpha" ;; - "EV5 (21164)") - UNAME_MACHINE="alphaev5" ;; - "EV5.6 (21164A)") - UNAME_MACHINE="alphaev56" ;; - "EV5.6 (21164PC)") - UNAME_MACHINE="alphapca56" ;; - "EV5.7 (21164PC)") - UNAME_MACHINE="alphapca57" ;; - "EV6 (21264)") - UNAME_MACHINE="alphaev6" ;; - "EV6.7 (21264A)") - UNAME_MACHINE="alphaev67" ;; - "EV6.8CB (21264C)") - UNAME_MACHINE="alphaev68" ;; - "EV6.8AL (21264B)") - UNAME_MACHINE="alphaev68" ;; - "EV6.8CX (21264D)") - UNAME_MACHINE="alphaev68" ;; - "EV6.9A (21264/EV69A)") - UNAME_MACHINE="alphaev69" ;; - "EV7 (21364)") - UNAME_MACHINE="alphaev7" ;; - "EV7.9 (21364A)") - UNAME_MACHINE="alphaev79" ;; - esac - # A Pn.n version is a patched version. - # A Vn.n version is a released version. - # A Tn.n version is a released field test version. - # A Xn.n version is an unreleased experimental baselevel. - # 1.2 uses "1.2" for uname -r. - echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` - # Reset EXIT trap before exiting to avoid spurious non-zero exit code. - exitcode=$? - trap '' 0 - exit $exitcode ;; - Alpha\ *:Windows_NT*:*) - # How do we know it's Interix rather than the generic POSIX subsystem? - # Should we change UNAME_MACHINE based on the output of uname instead - # of the specific Alpha model? - echo alpha-pc-interix - exit ;; - 21064:Windows_NT:50:3) - echo alpha-dec-winnt3.5 - exit ;; - Amiga*:UNIX_System_V:4.0:*) - echo m68k-unknown-sysv4 - exit ;; - *:[Aa]miga[Oo][Ss]:*:*) - echo ${UNAME_MACHINE}-unknown-amigaos - exit ;; - *:[Mm]orph[Oo][Ss]:*:*) - echo ${UNAME_MACHINE}-unknown-morphos - exit ;; - *:OS/390:*:*) - echo i370-ibm-openedition - exit ;; - *:z/VM:*:*) - echo s390-ibm-zvmoe - exit ;; - *:OS400:*:*) - echo powerpc-ibm-os400 - exit ;; - arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) - echo arm-acorn-riscix${UNAME_RELEASE} - exit ;; - arm:riscos:*:*|arm:RISCOS:*:*) - echo arm-unknown-riscos - exit ;; - SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) - echo hppa1.1-hitachi-hiuxmpp - exit ;; - Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) - # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. - if test "`(/bin/universe) 2>/dev/null`" = att ; then - echo pyramid-pyramid-sysv3 - else - echo pyramid-pyramid-bsd - fi - exit ;; - NILE*:*:*:dcosx) - echo pyramid-pyramid-svr4 - exit ;; - DRS?6000:unix:4.0:6*) - echo sparc-icl-nx6 - exit ;; - DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*) - case `/usr/bin/uname -p` in - sparc) echo sparc-icl-nx7; exit ;; - esac ;; - s390x:SunOS:*:*) - echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; - sun4H:SunOS:5.*:*) - echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; - sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) - echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; - i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*) - echo i386-pc-auroraux${UNAME_RELEASE} - exit ;; - i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*) - eval $set_cc_for_build - SUN_ARCH="i386" - # If there is a compiler, see if it is configured for 64-bit objects. - # Note that the Sun cc does not turn __LP64__ into 1 like gcc does. - # This test works for both compilers. - if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then - if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \ - (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \ - grep IS_64BIT_ARCH >/dev/null - then - SUN_ARCH="x86_64" - fi - fi - echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; - sun4*:SunOS:6*:*) - # According to config.sub, this is the proper way to canonicalize - # SunOS6. Hard to guess exactly what SunOS6 will be like, but - # it's likely to be more like Solaris than SunOS4. - echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; - sun4*:SunOS:*:*) - case "`/usr/bin/arch -k`" in - Series*|S4*) - UNAME_RELEASE=`uname -v` - ;; - esac - # Japanese Language versions have a version number like `4.1.3-JL'. - echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` - exit ;; - sun3*:SunOS:*:*) - echo m68k-sun-sunos${UNAME_RELEASE} - exit ;; - sun*:*:4.2BSD:*) - UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` - test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 - case "`/bin/arch`" in - sun3) - echo m68k-sun-sunos${UNAME_RELEASE} - ;; - sun4) - echo sparc-sun-sunos${UNAME_RELEASE} - ;; - esac - exit ;; - aushp:SunOS:*:*) - echo sparc-auspex-sunos${UNAME_RELEASE} - exit ;; - # The situation for MiNT is a little confusing. The machine name - # can be virtually everything (everything which is not - # "atarist" or "atariste" at least should have a processor - # > m68000). The system name ranges from "MiNT" over "FreeMiNT" - # to the lowercase version "mint" (or "freemint"). Finally - # the system name "TOS" denotes a system which is actually not - # MiNT. But MiNT is downward compatible to TOS, so this should - # be no problem. - atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) - echo m68k-atari-mint${UNAME_RELEASE} - exit ;; - atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) - echo m68k-atari-mint${UNAME_RELEASE} - exit ;; - *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) - echo m68k-atari-mint${UNAME_RELEASE} - exit ;; - milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) - echo m68k-milan-mint${UNAME_RELEASE} - exit ;; - hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) - echo m68k-hades-mint${UNAME_RELEASE} - exit ;; - *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) - echo m68k-unknown-mint${UNAME_RELEASE} - exit ;; - m68k:machten:*:*) - echo m68k-apple-machten${UNAME_RELEASE} - exit ;; - powerpc:machten:*:*) - echo powerpc-apple-machten${UNAME_RELEASE} - exit ;; - RISC*:Mach:*:*) - echo mips-dec-mach_bsd4.3 - exit ;; - RISC*:ULTRIX:*:*) - echo mips-dec-ultrix${UNAME_RELEASE} - exit ;; - VAX*:ULTRIX*:*:*) - echo vax-dec-ultrix${UNAME_RELEASE} - exit ;; - 2020:CLIX:*:* | 2430:CLIX:*:*) - echo clipper-intergraph-clix${UNAME_RELEASE} - exit ;; - mips:*:*:UMIPS | mips:*:*:RISCos) - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c -#ifdef __cplusplus -#include /* for printf() prototype */ - int main (int argc, char *argv[]) { -#else - int main (argc, argv) int argc; char *argv[]; { -#endif - #if defined (host_mips) && defined (MIPSEB) - #if defined (SYSTYPE_SYSV) - printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); - #endif - #if defined (SYSTYPE_SVR4) - printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0); - #endif - #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) - printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0); - #endif - #endif - exit (-1); - } -EOF - $CC_FOR_BUILD -o $dummy $dummy.c && - dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` && - SYSTEM_NAME=`$dummy $dummyarg` && - { echo "$SYSTEM_NAME"; exit; } - echo mips-mips-riscos${UNAME_RELEASE} - exit ;; - Motorola:PowerMAX_OS:*:*) - echo powerpc-motorola-powermax - exit ;; - Motorola:*:4.3:PL8-*) - echo powerpc-harris-powermax - exit ;; - Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) - echo powerpc-harris-powermax - exit ;; - Night_Hawk:Power_UNIX:*:*) - echo powerpc-harris-powerunix - exit ;; - m88k:CX/UX:7*:*) - echo m88k-harris-cxux7 - exit ;; - m88k:*:4*:R4*) - echo m88k-motorola-sysv4 - exit ;; - m88k:*:3*:R3*) - echo m88k-motorola-sysv3 - exit ;; - AViiON:dgux:*:*) - # DG/UX returns AViiON for all architectures - UNAME_PROCESSOR=`/usr/bin/uname -p` - if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] - then - if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ - [ ${TARGET_BINARY_INTERFACE}x = x ] - then - echo m88k-dg-dgux${UNAME_RELEASE} - else - echo m88k-dg-dguxbcs${UNAME_RELEASE} - fi - else - echo i586-dg-dgux${UNAME_RELEASE} - fi - exit ;; - M88*:DolphinOS:*:*) # DolphinOS (SVR3) - echo m88k-dolphin-sysv3 - exit ;; - M88*:*:R3*:*) - # Delta 88k system running SVR3 - echo m88k-motorola-sysv3 - exit ;; - XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) - echo m88k-tektronix-sysv3 - exit ;; - Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) - echo m68k-tektronix-bsd - exit ;; - *:IRIX*:*:*) - echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` - exit ;; - ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. - echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id - exit ;; # Note that: echo "'`uname -s`'" gives 'AIX ' - i*86:AIX:*:*) - echo i386-ibm-aix - exit ;; - ia64:AIX:*:*) - if [ -x /usr/bin/oslevel ] ; then - IBM_REV=`/usr/bin/oslevel` - else - IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} - fi - echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} - exit ;; - *:AIX:2:3) - if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #include - - main() - { - if (!__power_pc()) - exit(1); - puts("powerpc-ibm-aix3.2.5"); - exit(0); - } -EOF - if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` - then - echo "$SYSTEM_NAME" - else - echo rs6000-ibm-aix3.2.5 - fi - elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then - echo rs6000-ibm-aix3.2.4 - else - echo rs6000-ibm-aix3.2 - fi - exit ;; - *:AIX:*:[4567]) - IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` - if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then - IBM_ARCH=rs6000 - else - IBM_ARCH=powerpc - fi - if [ -x /usr/bin/oslevel ] ; then - IBM_REV=`/usr/bin/oslevel` - else - IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} - fi - echo ${IBM_ARCH}-ibm-aix${IBM_REV} - exit ;; - *:AIX:*:*) - echo rs6000-ibm-aix - exit ;; - ibmrt:4.4BSD:*|romp-ibm:BSD:*) - echo romp-ibm-bsd4.4 - exit ;; - ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and - echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to - exit ;; # report: romp-ibm BSD 4.3 - *:BOSX:*:*) - echo rs6000-bull-bosx - exit ;; - DPX/2?00:B.O.S.:*:*) - echo m68k-bull-sysv3 - exit ;; - 9000/[34]??:4.3bsd:1.*:*) - echo m68k-hp-bsd - exit ;; - hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) - echo m68k-hp-bsd4.4 - exit ;; - 9000/[34678]??:HP-UX:*:*) - HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` - case "${UNAME_MACHINE}" in - 9000/31? ) HP_ARCH=m68000 ;; - 9000/[34]?? ) HP_ARCH=m68k ;; - 9000/[678][0-9][0-9]) - if [ -x /usr/bin/getconf ]; then - sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` - sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` - case "${sc_cpu_version}" in - 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 - 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 - 532) # CPU_PA_RISC2_0 - case "${sc_kernel_bits}" in - 32) HP_ARCH="hppa2.0n" ;; - 64) HP_ARCH="hppa2.0w" ;; - '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20 - esac ;; - esac - fi - if [ "${HP_ARCH}" = "" ]; then - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - - #define _HPUX_SOURCE - #include - #include - - int main () - { - #if defined(_SC_KERNEL_BITS) - long bits = sysconf(_SC_KERNEL_BITS); - #endif - long cpu = sysconf (_SC_CPU_VERSION); - - switch (cpu) - { - case CPU_PA_RISC1_0: puts ("hppa1.0"); break; - case CPU_PA_RISC1_1: puts ("hppa1.1"); break; - case CPU_PA_RISC2_0: - #if defined(_SC_KERNEL_BITS) - switch (bits) - { - case 64: puts ("hppa2.0w"); break; - case 32: puts ("hppa2.0n"); break; - default: puts ("hppa2.0"); break; - } break; - #else /* !defined(_SC_KERNEL_BITS) */ - puts ("hppa2.0"); break; - #endif - default: puts ("hppa1.0"); break; - } - exit (0); - } -EOF - (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` - test -z "$HP_ARCH" && HP_ARCH=hppa - fi ;; - esac - if [ ${HP_ARCH} = "hppa2.0w" ] - then - eval $set_cc_for_build - - # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating - # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler - # generating 64-bit code. GNU and HP use different nomenclature: - # - # $ CC_FOR_BUILD=cc ./config.guess - # => hppa2.0w-hp-hpux11.23 - # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess - # => hppa64-hp-hpux11.23 - - if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | - grep -q __LP64__ - then - HP_ARCH="hppa2.0w" - else - HP_ARCH="hppa64" - fi - fi - echo ${HP_ARCH}-hp-hpux${HPUX_REV} - exit ;; - ia64:HP-UX:*:*) - HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` - echo ia64-hp-hpux${HPUX_REV} - exit ;; - 3050*:HI-UX:*:*) - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #include - int - main () - { - long cpu = sysconf (_SC_CPU_VERSION); - /* The order matters, because CPU_IS_HP_MC68K erroneously returns - true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct - results, however. */ - if (CPU_IS_PA_RISC (cpu)) - { - switch (cpu) - { - case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; - case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; - case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; - default: puts ("hppa-hitachi-hiuxwe2"); break; - } - } - else if (CPU_IS_HP_MC68K (cpu)) - puts ("m68k-hitachi-hiuxwe2"); - else puts ("unknown-hitachi-hiuxwe2"); - exit (0); - } -EOF - $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` && - { echo "$SYSTEM_NAME"; exit; } - echo unknown-hitachi-hiuxwe2 - exit ;; - 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) - echo hppa1.1-hp-bsd - exit ;; - 9000/8??:4.3bsd:*:*) - echo hppa1.0-hp-bsd - exit ;; - *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) - echo hppa1.0-hp-mpeix - exit ;; - hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) - echo hppa1.1-hp-osf - exit ;; - hp8??:OSF1:*:*) - echo hppa1.0-hp-osf - exit ;; - i*86:OSF1:*:*) - if [ -x /usr/sbin/sysversion ] ; then - echo ${UNAME_MACHINE}-unknown-osf1mk - else - echo ${UNAME_MACHINE}-unknown-osf1 - fi - exit ;; - parisc*:Lites*:*:*) - echo hppa1.1-hp-lites - exit ;; - C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) - echo c1-convex-bsd - exit ;; - C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) - if getsysinfo -f scalar_acc - then echo c32-convex-bsd - else echo c2-convex-bsd - fi - exit ;; - C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) - echo c34-convex-bsd - exit ;; - C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) - echo c38-convex-bsd - exit ;; - C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) - echo c4-convex-bsd - exit ;; - CRAY*Y-MP:*:*:*) - echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit ;; - CRAY*[A-Z]90:*:*:*) - echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ - | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ - -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ - -e 's/\.[^.]*$/.X/' - exit ;; - CRAY*TS:*:*:*) - echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit ;; - CRAY*T3E:*:*:*) - echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit ;; - CRAY*SV1:*:*:*) - echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit ;; - *:UNICOS/mp:*:*) - echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit ;; - F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) - FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` - FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` - FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` - echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" - exit ;; - 5000:UNIX_System_V:4.*:*) - FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` - FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'` - echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" - exit ;; - i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) - echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} - exit ;; - sparc*:BSD/OS:*:*) - echo sparc-unknown-bsdi${UNAME_RELEASE} - exit ;; - *:BSD/OS:*:*) - echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} - exit ;; - *:FreeBSD:*:*) - UNAME_PROCESSOR=`/usr/bin/uname -p` - case ${UNAME_PROCESSOR} in - amd64) - echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; - *) - echo ${UNAME_PROCESSOR}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; - esac - exit ;; - i*:CYGWIN*:*) - echo ${UNAME_MACHINE}-pc-cygwin - exit ;; - *:MINGW*:*) - echo ${UNAME_MACHINE}-pc-mingw32 - exit ;; - i*:MSYS*:*) - echo ${UNAME_MACHINE}-pc-msys - exit ;; - i*:windows32*:*) - # uname -m includes "-pc" on this system. - echo ${UNAME_MACHINE}-mingw32 - exit ;; - i*:PW*:*) - echo ${UNAME_MACHINE}-pc-pw32 - exit ;; - *:Interix*:*) - case ${UNAME_MACHINE} in - x86) - echo i586-pc-interix${UNAME_RELEASE} - exit ;; - authenticamd | genuineintel | EM64T) - echo x86_64-unknown-interix${UNAME_RELEASE} - exit ;; - IA64) - echo ia64-unknown-interix${UNAME_RELEASE} - exit ;; - esac ;; - [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) - echo i${UNAME_MACHINE}-pc-mks - exit ;; - 8664:Windows_NT:*) - echo x86_64-pc-mks - exit ;; - i*:Windows_NT*:* | Pentium*:Windows_NT*:*) - # How do we know it's Interix rather than the generic POSIX subsystem? - # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we - # UNAME_MACHINE based on the output of uname instead of i386? - echo i586-pc-interix - exit ;; - i*:UWIN*:*) - echo ${UNAME_MACHINE}-pc-uwin - exit ;; - amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*) - echo x86_64-unknown-cygwin - exit ;; - p*:CYGWIN*:*) - echo powerpcle-unknown-cygwin - exit ;; - prep*:SunOS:5.*:*) - echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; - *:GNU:*:*) - # the GNU system - echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` - exit ;; - *:GNU/*:*:*) - # other systems with GNU libc and userland - echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu - exit ;; - i*86:Minix:*:*) - echo ${UNAME_MACHINE}-pc-minix - exit ;; - alpha:Linux:*:*) - case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in - EV5) UNAME_MACHINE=alphaev5 ;; - EV56) UNAME_MACHINE=alphaev56 ;; - PCA56) UNAME_MACHINE=alphapca56 ;; - PCA57) UNAME_MACHINE=alphapca56 ;; - EV6) UNAME_MACHINE=alphaev6 ;; - EV67) UNAME_MACHINE=alphaev67 ;; - EV68*) UNAME_MACHINE=alphaev68 ;; - esac - objdump --private-headers /bin/sh | grep -q ld.so.1 - if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi - echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} - exit ;; - arm*:Linux:*:*) - eval $set_cc_for_build - if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \ - | grep -q __ARM_EABI__ - then - echo ${UNAME_MACHINE}-unknown-linux-gnu - else - if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \ - | grep -q __ARM_PCS_VFP - then - echo ${UNAME_MACHINE}-unknown-linux-gnueabi - else - echo ${UNAME_MACHINE}-unknown-linux-gnueabihf - fi - fi - exit ;; - avr32*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - cris:Linux:*:*) - echo cris-axis-linux-gnu - exit ;; - crisv32:Linux:*:*) - echo crisv32-axis-linux-gnu - exit ;; - frv:Linux:*:*) - echo frv-unknown-linux-gnu - exit ;; - hexagon:Linux:*:*) - echo hexagon-unknown-linux-gnu - exit ;; - i*86:Linux:*:*) - LIBC=gnu - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #ifdef __dietlibc__ - LIBC=dietlibc - #endif -EOF - eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'` - echo "${UNAME_MACHINE}-pc-linux-${LIBC}" - exit ;; - ia64:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - m32r*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - m68*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - mips:Linux:*:* | mips64:Linux:*:*) - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #undef CPU - #undef ${UNAME_MACHINE} - #undef ${UNAME_MACHINE}el - #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) - CPU=${UNAME_MACHINE}el - #else - #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) - CPU=${UNAME_MACHINE} - #else - CPU= - #endif - #endif -EOF - eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'` - test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } - ;; - or32:Linux:*:*) - echo or32-unknown-linux-gnu - exit ;; - padre:Linux:*:*) - echo sparc-unknown-linux-gnu - exit ;; - parisc64:Linux:*:* | hppa64:Linux:*:*) - echo hppa64-unknown-linux-gnu - exit ;; - parisc:Linux:*:* | hppa:Linux:*:*) - # Look for CPU level - case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in - PA7*) echo hppa1.1-unknown-linux-gnu ;; - PA8*) echo hppa2.0-unknown-linux-gnu ;; - *) echo hppa-unknown-linux-gnu ;; - esac - exit ;; - ppc64:Linux:*:*) - echo powerpc64-unknown-linux-gnu - exit ;; - ppc:Linux:*:*) - echo powerpc-unknown-linux-gnu - exit ;; - s390:Linux:*:* | s390x:Linux:*:*) - echo ${UNAME_MACHINE}-ibm-linux - exit ;; - sh64*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - sh*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - sparc:Linux:*:* | sparc64:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - tile*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - vax:Linux:*:*) - echo ${UNAME_MACHINE}-dec-linux-gnu - exit ;; - x86_64:Linux:*:*) - echo x86_64-unknown-linux-gnu - exit ;; - xtensa*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - i*86:DYNIX/ptx:4*:*) - # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. - # earlier versions are messed up and put the nodename in both - # sysname and nodename. - echo i386-sequent-sysv4 - exit ;; - i*86:UNIX_SV:4.2MP:2.*) - # Unixware is an offshoot of SVR4, but it has its own version - # number series starting with 2... - # I am not positive that other SVR4 systems won't match this, - # I just have to hope. -- rms. - # Use sysv4.2uw... so that sysv4* matches it. - echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} - exit ;; - i*86:OS/2:*:*) - # If we were able to find `uname', then EMX Unix compatibility - # is probably installed. - echo ${UNAME_MACHINE}-pc-os2-emx - exit ;; - i*86:XTS-300:*:STOP) - echo ${UNAME_MACHINE}-unknown-stop - exit ;; - i*86:atheos:*:*) - echo ${UNAME_MACHINE}-unknown-atheos - exit ;; - i*86:syllable:*:*) - echo ${UNAME_MACHINE}-pc-syllable - exit ;; - i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*) - echo i386-unknown-lynxos${UNAME_RELEASE} - exit ;; - i*86:*DOS:*:*) - echo ${UNAME_MACHINE}-pc-msdosdjgpp - exit ;; - i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) - UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` - if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then - echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} - else - echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} - fi - exit ;; - i*86:*:5:[678]*) - # UnixWare 7.x, OpenUNIX and OpenServer 6. - case `/bin/uname -X | grep "^Machine"` in - *486*) UNAME_MACHINE=i486 ;; - *Pentium) UNAME_MACHINE=i586 ;; - *Pent*|*Celeron) UNAME_MACHINE=i686 ;; - esac - echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} - exit ;; - i*86:*:3.2:*) - if test -f /usr/options/cb.name; then - UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then - UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` - (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 - (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ - && UNAME_MACHINE=i586 - (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ - && UNAME_MACHINE=i686 - (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ - && UNAME_MACHINE=i686 - echo ${UNAME_MACHINE}-pc-sco$UNAME_REL - else - echo ${UNAME_MACHINE}-pc-sysv32 - fi - exit ;; - pc:*:*:*) - # Left here for compatibility: - # uname -m prints for DJGPP always 'pc', but it prints nothing about - # the processor, so we play safe by assuming i586. - # Note: whatever this is, it MUST be the same as what config.sub - # prints for the "djgpp" host, or else GDB configury will decide that - # this is a cross-build. - echo i586-pc-msdosdjgpp - exit ;; - Intel:Mach:3*:*) - echo i386-pc-mach3 - exit ;; - paragon:*:*:*) - echo i860-intel-osf1 - exit ;; - i860:*:4.*:*) # i860-SVR4 - if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then - echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 - else # Add other i860-SVR4 vendors below as they are discovered. - echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 - fi - exit ;; - mini*:CTIX:SYS*5:*) - # "miniframe" - echo m68010-convergent-sysv - exit ;; - mc68k:UNIX:SYSTEM5:3.51m) - echo m68k-convergent-sysv - exit ;; - M680?0:D-NIX:5.3:*) - echo m68k-diab-dnix - exit ;; - M68*:*:R3V[5678]*:*) - test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;; - 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0) - OS_REL='' - test -r /etc/.relid \ - && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` - /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && { echo i486-ncr-sysv4.3${OS_REL}; exit; } - /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ - && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; - 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) - /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && { echo i486-ncr-sysv4; exit; } ;; - NCR*:*:4.2:* | MPRAS*:*:4.2:*) - OS_REL='.3' - test -r /etc/.relid \ - && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` - /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && { echo i486-ncr-sysv4.3${OS_REL}; exit; } - /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ - && { echo i586-ncr-sysv4.3${OS_REL}; exit; } - /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \ - && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; - m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) - echo m68k-unknown-lynxos${UNAME_RELEASE} - exit ;; - mc68030:UNIX_System_V:4.*:*) - echo m68k-atari-sysv4 - exit ;; - TSUNAMI:LynxOS:2.*:*) - echo sparc-unknown-lynxos${UNAME_RELEASE} - exit ;; - rs6000:LynxOS:2.*:*) - echo rs6000-unknown-lynxos${UNAME_RELEASE} - exit ;; - PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*) - echo powerpc-unknown-lynxos${UNAME_RELEASE} - exit ;; - SM[BE]S:UNIX_SV:*:*) - echo mips-dde-sysv${UNAME_RELEASE} - exit ;; - RM*:ReliantUNIX-*:*:*) - echo mips-sni-sysv4 - exit ;; - RM*:SINIX-*:*:*) - echo mips-sni-sysv4 - exit ;; - *:SINIX-*:*:*) - if uname -p 2>/dev/null >/dev/null ; then - UNAME_MACHINE=`(uname -p) 2>/dev/null` - echo ${UNAME_MACHINE}-sni-sysv4 - else - echo ns32k-sni-sysv - fi - exit ;; - PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort - # says - echo i586-unisys-sysv4 - exit ;; - *:UNIX_System_V:4*:FTX*) - # From Gerald Hewes . - # How about differentiating between stratus architectures? -djm - echo hppa1.1-stratus-sysv4 - exit ;; - *:*:*:FTX*) - # From seanf@swdc.stratus.com. - echo i860-stratus-sysv4 - exit ;; - i*86:VOS:*:*) - # From Paul.Green@stratus.com. - echo ${UNAME_MACHINE}-stratus-vos - exit ;; - *:VOS:*:*) - # From Paul.Green@stratus.com. - echo hppa1.1-stratus-vos - exit ;; - mc68*:A/UX:*:*) - echo m68k-apple-aux${UNAME_RELEASE} - exit ;; - news*:NEWS-OS:6*:*) - echo mips-sony-newsos6 - exit ;; - R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) - if [ -d /usr/nec ]; then - echo mips-nec-sysv${UNAME_RELEASE} - else - echo mips-unknown-sysv${UNAME_RELEASE} - fi - exit ;; - BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. - echo powerpc-be-beos - exit ;; - BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. - echo powerpc-apple-beos - exit ;; - BePC:BeOS:*:*) # BeOS running on Intel PC compatible. - echo i586-pc-beos - exit ;; - BePC:Haiku:*:*) # Haiku running on Intel PC compatible. - echo i586-pc-haiku - exit ;; - SX-4:SUPER-UX:*:*) - echo sx4-nec-superux${UNAME_RELEASE} - exit ;; - SX-5:SUPER-UX:*:*) - echo sx5-nec-superux${UNAME_RELEASE} - exit ;; - SX-6:SUPER-UX:*:*) - echo sx6-nec-superux${UNAME_RELEASE} - exit ;; - SX-7:SUPER-UX:*:*) - echo sx7-nec-superux${UNAME_RELEASE} - exit ;; - SX-8:SUPER-UX:*:*) - echo sx8-nec-superux${UNAME_RELEASE} - exit ;; - SX-8R:SUPER-UX:*:*) - echo sx8r-nec-superux${UNAME_RELEASE} - exit ;; - Power*:Rhapsody:*:*) - echo powerpc-apple-rhapsody${UNAME_RELEASE} - exit ;; - *:Rhapsody:*:*) - echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} - exit ;; - *:Darwin:*:*) - UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown - case $UNAME_PROCESSOR in - i386) - eval $set_cc_for_build - if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then - if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \ - (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \ - grep IS_64BIT_ARCH >/dev/null - then - UNAME_PROCESSOR="x86_64" - fi - fi ;; - unknown) UNAME_PROCESSOR=powerpc ;; - esac - echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} - exit ;; - *:procnto*:*:* | *:QNX:[0123456789]*:*) - UNAME_PROCESSOR=`uname -p` - if test "$UNAME_PROCESSOR" = "x86"; then - UNAME_PROCESSOR=i386 - UNAME_MACHINE=pc - fi - echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} - exit ;; - *:QNX:*:4*) - echo i386-pc-qnx - exit ;; - NEO-?:NONSTOP_KERNEL:*:*) - echo neo-tandem-nsk${UNAME_RELEASE} - exit ;; - NSE-?:NONSTOP_KERNEL:*:*) - echo nse-tandem-nsk${UNAME_RELEASE} - exit ;; - NSR-?:NONSTOP_KERNEL:*:*) - echo nsr-tandem-nsk${UNAME_RELEASE} - exit ;; - *:NonStop-UX:*:*) - echo mips-compaq-nonstopux - exit ;; - BS2000:POSIX*:*:*) - echo bs2000-siemens-sysv - exit ;; - DS/*:UNIX_System_V:*:*) - echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} - exit ;; - *:Plan9:*:*) - # "uname -m" is not consistent, so use $cputype instead. 386 - # is converted to i386 for consistency with other x86 - # operating systems. - if test "$cputype" = "386"; then - UNAME_MACHINE=i386 - else - UNAME_MACHINE="$cputype" - fi - echo ${UNAME_MACHINE}-unknown-plan9 - exit ;; - *:TOPS-10:*:*) - echo pdp10-unknown-tops10 - exit ;; - *:TENEX:*:*) - echo pdp10-unknown-tenex - exit ;; - KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) - echo pdp10-dec-tops20 - exit ;; - XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) - echo pdp10-xkl-tops20 - exit ;; - *:TOPS-20:*:*) - echo pdp10-unknown-tops20 - exit ;; - *:ITS:*:*) - echo pdp10-unknown-its - exit ;; - SEI:*:*:SEIUX) - echo mips-sei-seiux${UNAME_RELEASE} - exit ;; - *:DragonFly:*:*) - echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` - exit ;; - *:*VMS:*:*) - UNAME_MACHINE=`(uname -p) 2>/dev/null` - case "${UNAME_MACHINE}" in - A*) echo alpha-dec-vms ; exit ;; - I*) echo ia64-dec-vms ; exit ;; - V*) echo vax-dec-vms ; exit ;; - esac ;; - *:XENIX:*:SysV) - echo i386-pc-xenix - exit ;; - i*86:skyos:*:*) - echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//' - exit ;; - i*86:rdos:*:*) - echo ${UNAME_MACHINE}-pc-rdos - exit ;; - i*86:AROS:*:*) - echo ${UNAME_MACHINE}-pc-aros - exit ;; -esac - -#echo '(No uname command or uname output not recognized.)' 1>&2 -#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2 - -eval $set_cc_for_build -cat >$dummy.c < -# include -#endif -main () -{ -#if defined (sony) -#if defined (MIPSEB) - /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed, - I don't know.... */ - printf ("mips-sony-bsd\n"); exit (0); -#else -#include - printf ("m68k-sony-newsos%s\n", -#ifdef NEWSOS4 - "4" -#else - "" -#endif - ); exit (0); -#endif -#endif - -#if defined (__arm) && defined (__acorn) && defined (__unix) - printf ("arm-acorn-riscix\n"); exit (0); -#endif - -#if defined (hp300) && !defined (hpux) - printf ("m68k-hp-bsd\n"); exit (0); -#endif - -#if defined (NeXT) -#if !defined (__ARCHITECTURE__) -#define __ARCHITECTURE__ "m68k" -#endif - int version; - version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`; - if (version < 4) - printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); - else - printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version); - exit (0); -#endif - -#if defined (MULTIMAX) || defined (n16) -#if defined (UMAXV) - printf ("ns32k-encore-sysv\n"); exit (0); -#else -#if defined (CMU) - printf ("ns32k-encore-mach\n"); exit (0); -#else - printf ("ns32k-encore-bsd\n"); exit (0); -#endif -#endif -#endif - -#if defined (__386BSD__) - printf ("i386-pc-bsd\n"); exit (0); -#endif - -#if defined (sequent) -#if defined (i386) - printf ("i386-sequent-dynix\n"); exit (0); -#endif -#if defined (ns32000) - printf ("ns32k-sequent-dynix\n"); exit (0); -#endif -#endif - -#if defined (_SEQUENT_) - struct utsname un; - - uname(&un); - - if (strncmp(un.version, "V2", 2) == 0) { - printf ("i386-sequent-ptx2\n"); exit (0); - } - if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */ - printf ("i386-sequent-ptx1\n"); exit (0); - } - printf ("i386-sequent-ptx\n"); exit (0); - -#endif - -#if defined (vax) -# if !defined (ultrix) -# include -# if defined (BSD) -# if BSD == 43 - printf ("vax-dec-bsd4.3\n"); exit (0); -# else -# if BSD == 199006 - printf ("vax-dec-bsd4.3reno\n"); exit (0); -# else - printf ("vax-dec-bsd\n"); exit (0); -# endif -# endif -# else - printf ("vax-dec-bsd\n"); exit (0); -# endif -# else - printf ("vax-dec-ultrix\n"); exit (0); -# endif -#endif - -#if defined (alliant) && defined (i860) - printf ("i860-alliant-bsd\n"); exit (0); -#endif - - exit (1); -} -EOF - -$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` && - { echo "$SYSTEM_NAME"; exit; } - -# Apollos put the system type in the environment. - -test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; } - -# Convex versions that predate uname can use getsysinfo(1) - -if [ -x /usr/convex/getsysinfo ] -then - case `getsysinfo -f cpu_type` in - c1*) - echo c1-convex-bsd - exit ;; - c2*) - if getsysinfo -f scalar_acc - then echo c32-convex-bsd - else echo c2-convex-bsd - fi - exit ;; - c34*) - echo c34-convex-bsd - exit ;; - c38*) - echo c38-convex-bsd - exit ;; - c4*) - echo c4-convex-bsd - exit ;; - esac -fi - -cat >&2 < in order to provide the needed -information to handle your system. - -config.guess timestamp = $timestamp - -uname -m = `(uname -m) 2>/dev/null || echo unknown` -uname -r = `(uname -r) 2>/dev/null || echo unknown` -uname -s = `(uname -s) 2>/dev/null || echo unknown` -uname -v = `(uname -v) 2>/dev/null || echo unknown` - -/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` -/bin/uname -X = `(/bin/uname -X) 2>/dev/null` - -hostinfo = `(hostinfo) 2>/dev/null` -/bin/universe = `(/bin/universe) 2>/dev/null` -/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` -/bin/arch = `(/bin/arch) 2>/dev/null` -/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` -/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` - -UNAME_MACHINE = ${UNAME_MACHINE} -UNAME_RELEASE = ${UNAME_RELEASE} -UNAME_SYSTEM = ${UNAME_SYSTEM} -UNAME_VERSION = ${UNAME_VERSION} -EOF - -exit 1 - -# Local variables: -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "timestamp='" -# time-stamp-format: "%:y-%02m-%02d" -# time-stamp-end: "'" -# End: diff --git a/jpeg/config.sub b/jpeg/config.sub deleted file mode 100755 index e76eaf4..0000000 --- a/jpeg/config.sub +++ /dev/null @@ -1,1771 +0,0 @@ -#! /bin/sh -# Configuration validation subroutine script. -# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, -# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, -# 2011 Free Software Foundation, Inc. - -timestamp='2011-11-11' - -# This file is (in principle) common to ALL GNU software. -# The presence of a machine in this file suggests that SOME GNU software -# can handle that machine. It does not imply ALL GNU software can. -# -# This file is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA -# 02110-1301, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - - -# Please send patches to . Submit a context -# diff and a properly formatted GNU ChangeLog entry. -# -# Configuration subroutine to validate and canonicalize a configuration type. -# Supply the specified configuration type as an argument. -# If it is invalid, we print an error message on stderr and exit with code 1. -# Otherwise, we print the canonical config type on stdout and succeed. - -# You can get the latest version of this script from: -# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD - -# This file is supposed to be the same for all GNU packages -# and recognize all the CPU types, system types and aliases -# that are meaningful with *any* GNU software. -# Each package is responsible for reporting which valid configurations -# it does not support. The user should be able to distinguish -# a failure to support a valid configuration from a meaningless -# configuration. - -# The goal of this file is to map all the various variations of a given -# machine specification into a single specification in the form: -# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM -# or in some cases, the newer four-part form: -# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM -# It is wrong to echo any other type of specification. - -me=`echo "$0" | sed -e 's,.*/,,'` - -usage="\ -Usage: $0 [OPTION] CPU-MFR-OPSYS - $0 [OPTION] ALIAS - -Canonicalize a configuration name. - -Operation modes: - -h, --help print this help, then exit - -t, --time-stamp print date of last modification, then exit - -v, --version print version number, then exit - -Report bugs and patches to ." - -version="\ -GNU config.sub ($timestamp) - -Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, -2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free -Software Foundation, Inc. - -This is free software; see the source for copying conditions. There is NO -warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." - -help=" -Try \`$me --help' for more information." - -# Parse command line -while test $# -gt 0 ; do - case $1 in - --time-stamp | --time* | -t ) - echo "$timestamp" ; exit ;; - --version | -v ) - echo "$version" ; exit ;; - --help | --h* | -h ) - echo "$usage"; exit ;; - -- ) # Stop option processing - shift; break ;; - - ) # Use stdin as input. - break ;; - -* ) - echo "$me: invalid option $1$help" - exit 1 ;; - - *local*) - # First pass through any local machine types. - echo $1 - exit ;; - - * ) - break ;; - esac -done - -case $# in - 0) echo "$me: missing argument$help" >&2 - exit 1;; - 1) ;; - *) echo "$me: too many arguments$help" >&2 - exit 1;; -esac - -# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). -# Here we must recognize all the valid KERNEL-OS combinations. -maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` -case $maybe_os in - nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \ - linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \ - knetbsd*-gnu* | netbsd*-gnu* | \ - kopensolaris*-gnu* | \ - storm-chaos* | os2-emx* | rtmk-nova*) - os=-$maybe_os - basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` - ;; - *) - basic_machine=`echo $1 | sed 's/-[^-]*$//'` - if [ $basic_machine != $1 ] - then os=`echo $1 | sed 's/.*-/-/'` - else os=; fi - ;; -esac - -### Let's recognize common machines as not being operating systems so -### that things like config.sub decstation-3100 work. We also -### recognize some manufacturers as not being operating systems, so we -### can provide default operating systems below. -case $os in - -sun*os*) - # Prevent following clause from handling this invalid input. - ;; - -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ - -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ - -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ - -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ - -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ - -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ - -apple | -axis | -knuth | -cray | -microblaze) - os= - basic_machine=$1 - ;; - -bluegene*) - os=-cnk - ;; - -sim | -cisco | -oki | -wec | -winbond) - os= - basic_machine=$1 - ;; - -scout) - ;; - -wrs) - os=-vxworks - basic_machine=$1 - ;; - -chorusos*) - os=-chorusos - basic_machine=$1 - ;; - -chorusrdb) - os=-chorusrdb - basic_machine=$1 - ;; - -hiux*) - os=-hiuxwe2 - ;; - -sco6) - os=-sco5v6 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco5) - os=-sco3.2v5 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco4) - os=-sco3.2v4 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco3.2.[4-9]*) - os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco3.2v[4-9]*) - # Don't forget version if it is 3.2v4 or newer. - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco5v6*) - # Don't forget version if it is 3.2v4 or newer. - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco*) - os=-sco3.2v2 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -udk*) - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -isc) - os=-isc2.2 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -clix*) - basic_machine=clipper-intergraph - ;; - -isc*) - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -lynx*) - os=-lynxos - ;; - -ptx*) - basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` - ;; - -windowsnt*) - os=`echo $os | sed -e 's/windowsnt/winnt/'` - ;; - -psos*) - os=-psos - ;; - -mint | -mint[0-9]*) - basic_machine=m68k-atari - os=-mint - ;; -esac - -# Decode aliases for certain CPU-COMPANY combinations. -case $basic_machine in - # Recognize the basic CPU types without company name. - # Some are omitted here because they have special meanings below. - 1750a | 580 \ - | a29k \ - | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ - | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ - | am33_2.0 \ - | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \ - | be32 | be64 \ - | bfin \ - | c4x | clipper \ - | d10v | d30v | dlx | dsp16xx \ - | epiphany \ - | fido | fr30 | frv \ - | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ - | hexagon \ - | i370 | i860 | i960 | ia64 \ - | ip2k | iq2000 \ - | le32 | le64 \ - | lm32 \ - | m32c | m32r | m32rle | m68000 | m68k | m88k \ - | maxq | mb | microblaze | mcore | mep | metag \ - | mips | mipsbe | mipseb | mipsel | mipsle \ - | mips16 \ - | mips64 | mips64el \ - | mips64octeon | mips64octeonel \ - | mips64orion | mips64orionel \ - | mips64r5900 | mips64r5900el \ - | mips64vr | mips64vrel \ - | mips64vr4100 | mips64vr4100el \ - | mips64vr4300 | mips64vr4300el \ - | mips64vr5000 | mips64vr5000el \ - | mips64vr5900 | mips64vr5900el \ - | mipsisa32 | mipsisa32el \ - | mipsisa32r2 | mipsisa32r2el \ - | mipsisa64 | mipsisa64el \ - | mipsisa64r2 | mipsisa64r2el \ - | mipsisa64sb1 | mipsisa64sb1el \ - | mipsisa64sr71k | mipsisa64sr71kel \ - | mipstx39 | mipstx39el \ - | mn10200 | mn10300 \ - | moxie \ - | mt \ - | msp430 \ - | nds32 | nds32le | nds32be \ - | nios | nios2 \ - | ns16k | ns32k \ - | open8 \ - | or32 \ - | pdp10 | pdp11 | pj | pjl \ - | powerpc | powerpc64 | powerpc64le | powerpcle \ - | pyramid \ - | rl78 | rx \ - | score \ - | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \ - | sh64 | sh64le \ - | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \ - | sparcv8 | sparcv9 | sparcv9b | sparcv9v \ - | spu \ - | tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \ - | ubicom32 \ - | v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \ - | we32k \ - | x86 | xc16x | xstormy16 | xtensa \ - | z8k | z80) - basic_machine=$basic_machine-unknown - ;; - c54x) - basic_machine=tic54x-unknown - ;; - c55x) - basic_machine=tic55x-unknown - ;; - c6x) - basic_machine=tic6x-unknown - ;; - m6811 | m68hc11 | m6812 | m68hc12 | picochip) - # Motorola 68HC11/12. - basic_machine=$basic_machine-unknown - os=-none - ;; - m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k) - ;; - ms1) - basic_machine=mt-unknown - ;; - - strongarm | thumb | xscale) - basic_machine=arm-unknown - ;; - - xscaleeb) - basic_machine=armeb-unknown - ;; - - xscaleel) - basic_machine=armel-unknown - ;; - - # We use `pc' rather than `unknown' - # because (1) that's what they normally are, and - # (2) the word "unknown" tends to confuse beginning users. - i*86 | x86_64) - basic_machine=$basic_machine-pc - ;; - # Object if more than one company name word. - *-*-*) - echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 - exit 1 - ;; - # Recognize the basic CPU types with company name. - 580-* \ - | a29k-* \ - | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ - | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ - | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \ - | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ - | avr-* | avr32-* \ - | be32-* | be64-* \ - | bfin-* | bs2000-* \ - | c[123]* | c30-* | [cjt]90-* | c4x-* \ - | clipper-* | craynv-* | cydra-* \ - | d10v-* | d30v-* | dlx-* \ - | elxsi-* \ - | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \ - | h8300-* | h8500-* \ - | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ - | hexagon-* \ - | i*86-* | i860-* | i960-* | ia64-* \ - | ip2k-* | iq2000-* \ - | le32-* | le64-* \ - | lm32-* \ - | m32c-* | m32r-* | m32rle-* \ - | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ - | m88110-* | m88k-* | maxq-* | mcore-* | metag-* | microblaze-* \ - | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ - | mips16-* \ - | mips64-* | mips64el-* \ - | mips64octeon-* | mips64octeonel-* \ - | mips64orion-* | mips64orionel-* \ - | mips64r5900-* | mips64r5900el-* \ - | mips64vr-* | mips64vrel-* \ - | mips64vr4100-* | mips64vr4100el-* \ - | mips64vr4300-* | mips64vr4300el-* \ - | mips64vr5000-* | mips64vr5000el-* \ - | mips64vr5900-* | mips64vr5900el-* \ - | mipsisa32-* | mipsisa32el-* \ - | mipsisa32r2-* | mipsisa32r2el-* \ - | mipsisa64-* | mipsisa64el-* \ - | mipsisa64r2-* | mipsisa64r2el-* \ - | mipsisa64sb1-* | mipsisa64sb1el-* \ - | mipsisa64sr71k-* | mipsisa64sr71kel-* \ - | mipstx39-* | mipstx39el-* \ - | mmix-* \ - | mt-* \ - | msp430-* \ - | nds32-* | nds32le-* | nds32be-* \ - | nios-* | nios2-* \ - | none-* | np1-* | ns16k-* | ns32k-* \ - | open8-* \ - | orion-* \ - | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ - | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \ - | pyramid-* \ - | rl78-* | romp-* | rs6000-* | rx-* \ - | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \ - | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ - | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \ - | sparclite-* \ - | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx?-* \ - | tahoe-* \ - | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \ - | tile*-* \ - | tron-* \ - | ubicom32-* \ - | v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \ - | vax-* \ - | we32k-* \ - | x86-* | x86_64-* | xc16x-* | xps100-* \ - | xstormy16-* | xtensa*-* \ - | ymp-* \ - | z8k-* | z80-*) - ;; - # Recognize the basic CPU types without company name, with glob match. - xtensa*) - basic_machine=$basic_machine-unknown - ;; - # Recognize the various machine names and aliases which stand - # for a CPU type and a company and sometimes even an OS. - 386bsd) - basic_machine=i386-unknown - os=-bsd - ;; - 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) - basic_machine=m68000-att - ;; - 3b*) - basic_machine=we32k-att - ;; - a29khif) - basic_machine=a29k-amd - os=-udi - ;; - abacus) - basic_machine=abacus-unknown - ;; - adobe68k) - basic_machine=m68010-adobe - os=-scout - ;; - alliant | fx80) - basic_machine=fx80-alliant - ;; - altos | altos3068) - basic_machine=m68k-altos - ;; - am29k) - basic_machine=a29k-none - os=-bsd - ;; - amd64) - basic_machine=x86_64-pc - ;; - amd64-*) - basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - amdahl) - basic_machine=580-amdahl - os=-sysv - ;; - amiga | amiga-*) - basic_machine=m68k-unknown - ;; - amigaos | amigados) - basic_machine=m68k-unknown - os=-amigaos - ;; - amigaunix | amix) - basic_machine=m68k-unknown - os=-sysv4 - ;; - apollo68) - basic_machine=m68k-apollo - os=-sysv - ;; - apollo68bsd) - basic_machine=m68k-apollo - os=-bsd - ;; - aros) - basic_machine=i386-pc - os=-aros - ;; - aux) - basic_machine=m68k-apple - os=-aux - ;; - balance) - basic_machine=ns32k-sequent - os=-dynix - ;; - blackfin) - basic_machine=bfin-unknown - os=-linux - ;; - blackfin-*) - basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'` - os=-linux - ;; - bluegene*) - basic_machine=powerpc-ibm - os=-cnk - ;; - c54x-*) - basic_machine=tic54x-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - c55x-*) - basic_machine=tic55x-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - c6x-*) - basic_machine=tic6x-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - c90) - basic_machine=c90-cray - os=-unicos - ;; - cegcc) - basic_machine=arm-unknown - os=-cegcc - ;; - convex-c1) - basic_machine=c1-convex - os=-bsd - ;; - convex-c2) - basic_machine=c2-convex - os=-bsd - ;; - convex-c32) - basic_machine=c32-convex - os=-bsd - ;; - convex-c34) - basic_machine=c34-convex - os=-bsd - ;; - convex-c38) - basic_machine=c38-convex - os=-bsd - ;; - cray | j90) - basic_machine=j90-cray - os=-unicos - ;; - craynv) - basic_machine=craynv-cray - os=-unicosmp - ;; - cr16 | cr16-*) - basic_machine=cr16-unknown - os=-elf - ;; - crds | unos) - basic_machine=m68k-crds - ;; - crisv32 | crisv32-* | etraxfs*) - basic_machine=crisv32-axis - ;; - cris | cris-* | etrax*) - basic_machine=cris-axis - ;; - crx) - basic_machine=crx-unknown - os=-elf - ;; - da30 | da30-*) - basic_machine=m68k-da30 - ;; - decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) - basic_machine=mips-dec - ;; - decsystem10* | dec10*) - basic_machine=pdp10-dec - os=-tops10 - ;; - decsystem20* | dec20*) - basic_machine=pdp10-dec - os=-tops20 - ;; - delta | 3300 | motorola-3300 | motorola-delta \ - | 3300-motorola | delta-motorola) - basic_machine=m68k-motorola - ;; - delta88) - basic_machine=m88k-motorola - os=-sysv3 - ;; - dicos) - basic_machine=i686-pc - os=-dicos - ;; - djgpp) - basic_machine=i586-pc - os=-msdosdjgpp - ;; - dpx20 | dpx20-*) - basic_machine=rs6000-bull - os=-bosx - ;; - dpx2* | dpx2*-bull) - basic_machine=m68k-bull - os=-sysv3 - ;; - ebmon29k) - basic_machine=a29k-amd - os=-ebmon - ;; - elxsi) - basic_machine=elxsi-elxsi - os=-bsd - ;; - encore | umax | mmax) - basic_machine=ns32k-encore - ;; - es1800 | OSE68k | ose68k | ose | OSE) - basic_machine=m68k-ericsson - os=-ose - ;; - fx2800) - basic_machine=i860-alliant - ;; - genix) - basic_machine=ns32k-ns - ;; - gmicro) - basic_machine=tron-gmicro - os=-sysv - ;; - go32) - basic_machine=i386-pc - os=-go32 - ;; - h3050r* | hiux*) - basic_machine=hppa1.1-hitachi - os=-hiuxwe2 - ;; - h8300hms) - basic_machine=h8300-hitachi - os=-hms - ;; - h8300xray) - basic_machine=h8300-hitachi - os=-xray - ;; - h8500hms) - basic_machine=h8500-hitachi - os=-hms - ;; - harris) - basic_machine=m88k-harris - os=-sysv3 - ;; - hp300-*) - basic_machine=m68k-hp - ;; - hp300bsd) - basic_machine=m68k-hp - os=-bsd - ;; - hp300hpux) - basic_machine=m68k-hp - os=-hpux - ;; - hp3k9[0-9][0-9] | hp9[0-9][0-9]) - basic_machine=hppa1.0-hp - ;; - hp9k2[0-9][0-9] | hp9k31[0-9]) - basic_machine=m68000-hp - ;; - hp9k3[2-9][0-9]) - basic_machine=m68k-hp - ;; - hp9k6[0-9][0-9] | hp6[0-9][0-9]) - basic_machine=hppa1.0-hp - ;; - hp9k7[0-79][0-9] | hp7[0-79][0-9]) - basic_machine=hppa1.1-hp - ;; - hp9k78[0-9] | hp78[0-9]) - # FIXME: really hppa2.0-hp - basic_machine=hppa1.1-hp - ;; - hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) - # FIXME: really hppa2.0-hp - basic_machine=hppa1.1-hp - ;; - hp9k8[0-9][13679] | hp8[0-9][13679]) - basic_machine=hppa1.1-hp - ;; - hp9k8[0-9][0-9] | hp8[0-9][0-9]) - basic_machine=hppa1.0-hp - ;; - hppa-next) - os=-nextstep3 - ;; - hppaosf) - basic_machine=hppa1.1-hp - os=-osf - ;; - hppro) - basic_machine=hppa1.1-hp - os=-proelf - ;; - i370-ibm* | ibm*) - basic_machine=i370-ibm - ;; -# I'm not sure what "Sysv32" means. Should this be sysv3.2? - i*86v32) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-sysv32 - ;; - i*86v4*) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-sysv4 - ;; - i*86v) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-sysv - ;; - i*86sol2) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-solaris2 - ;; - i386mach) - basic_machine=i386-mach - os=-mach - ;; - i386-vsta | vsta) - basic_machine=i386-unknown - os=-vsta - ;; - iris | iris4d) - basic_machine=mips-sgi - case $os in - -irix*) - ;; - *) - os=-irix4 - ;; - esac - ;; - isi68 | isi) - basic_machine=m68k-isi - os=-sysv - ;; - m68knommu) - basic_machine=m68k-unknown - os=-linux - ;; - m68knommu-*) - basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'` - os=-linux - ;; - m88k-omron*) - basic_machine=m88k-omron - ;; - magnum | m3230) - basic_machine=mips-mips - os=-sysv - ;; - merlin) - basic_machine=ns32k-utek - os=-sysv - ;; - microblaze) - basic_machine=microblaze-xilinx - ;; - mingw32) - basic_machine=i386-pc - os=-mingw32 - ;; - mingw32ce) - basic_machine=arm-unknown - os=-mingw32ce - ;; - miniframe) - basic_machine=m68000-convergent - ;; - *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) - basic_machine=m68k-atari - os=-mint - ;; - mips3*-*) - basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` - ;; - mips3*) - basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown - ;; - monitor) - basic_machine=m68k-rom68k - os=-coff - ;; - morphos) - basic_machine=powerpc-unknown - os=-morphos - ;; - msdos) - basic_machine=i386-pc - os=-msdos - ;; - ms1-*) - basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'` - ;; - msys) - basic_machine=i386-pc - os=-msys - ;; - mvs) - basic_machine=i370-ibm - os=-mvs - ;; - nacl) - basic_machine=le32-unknown - os=-nacl - ;; - ncr3000) - basic_machine=i486-ncr - os=-sysv4 - ;; - netbsd386) - basic_machine=i386-unknown - os=-netbsd - ;; - netwinder) - basic_machine=armv4l-rebel - os=-linux - ;; - news | news700 | news800 | news900) - basic_machine=m68k-sony - os=-newsos - ;; - news1000) - basic_machine=m68030-sony - os=-newsos - ;; - news-3600 | risc-news) - basic_machine=mips-sony - os=-newsos - ;; - necv70) - basic_machine=v70-nec - os=-sysv - ;; - next | m*-next ) - basic_machine=m68k-next - case $os in - -nextstep* ) - ;; - -ns2*) - os=-nextstep2 - ;; - *) - os=-nextstep3 - ;; - esac - ;; - nh3000) - basic_machine=m68k-harris - os=-cxux - ;; - nh[45]000) - basic_machine=m88k-harris - os=-cxux - ;; - nindy960) - basic_machine=i960-intel - os=-nindy - ;; - mon960) - basic_machine=i960-intel - os=-mon960 - ;; - nonstopux) - basic_machine=mips-compaq - os=-nonstopux - ;; - np1) - basic_machine=np1-gould - ;; - neo-tandem) - basic_machine=neo-tandem - ;; - nse-tandem) - basic_machine=nse-tandem - ;; - nsr-tandem) - basic_machine=nsr-tandem - ;; - op50n-* | op60c-*) - basic_machine=hppa1.1-oki - os=-proelf - ;; - openrisc | openrisc-*) - basic_machine=or32-unknown - ;; - os400) - basic_machine=powerpc-ibm - os=-os400 - ;; - OSE68000 | ose68000) - basic_machine=m68000-ericsson - os=-ose - ;; - os68k) - basic_machine=m68k-none - os=-os68k - ;; - pa-hitachi) - basic_machine=hppa1.1-hitachi - os=-hiuxwe2 - ;; - paragon) - basic_machine=i860-intel - os=-osf - ;; - parisc) - basic_machine=hppa-unknown - os=-linux - ;; - parisc-*) - basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'` - os=-linux - ;; - pbd) - basic_machine=sparc-tti - ;; - pbb) - basic_machine=m68k-tti - ;; - pc532 | pc532-*) - basic_machine=ns32k-pc532 - ;; - pc98) - basic_machine=i386-pc - ;; - pc98-*) - basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pentium | p5 | k5 | k6 | nexgen | viac3) - basic_machine=i586-pc - ;; - pentiumpro | p6 | 6x86 | athlon | athlon_*) - basic_machine=i686-pc - ;; - pentiumii | pentium2 | pentiumiii | pentium3) - basic_machine=i686-pc - ;; - pentium4) - basic_machine=i786-pc - ;; - pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) - basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pentiumpro-* | p6-* | 6x86-* | athlon-*) - basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*) - basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pentium4-*) - basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pn) - basic_machine=pn-gould - ;; - power) basic_machine=power-ibm - ;; - ppc | ppcbe) basic_machine=powerpc-unknown - ;; - ppc-* | ppcbe-*) - basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - ppcle | powerpclittle | ppc-le | powerpc-little) - basic_machine=powerpcle-unknown - ;; - ppcle-* | powerpclittle-*) - basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - ppc64) basic_machine=powerpc64-unknown - ;; - ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - ppc64le | powerpc64little | ppc64-le | powerpc64-little) - basic_machine=powerpc64le-unknown - ;; - ppc64le-* | powerpc64little-*) - basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - ps2) - basic_machine=i386-ibm - ;; - pw32) - basic_machine=i586-unknown - os=-pw32 - ;; - rdos) - basic_machine=i386-pc - os=-rdos - ;; - rom68k) - basic_machine=m68k-rom68k - os=-coff - ;; - rm[46]00) - basic_machine=mips-siemens - ;; - rtpc | rtpc-*) - basic_machine=romp-ibm - ;; - s390 | s390-*) - basic_machine=s390-ibm - ;; - s390x | s390x-*) - basic_machine=s390x-ibm - ;; - sa29200) - basic_machine=a29k-amd - os=-udi - ;; - sb1) - basic_machine=mipsisa64sb1-unknown - ;; - sb1el) - basic_machine=mipsisa64sb1el-unknown - ;; - sde) - basic_machine=mipsisa32-sde - os=-elf - ;; - sei) - basic_machine=mips-sei - os=-seiux - ;; - sequent) - basic_machine=i386-sequent - ;; - sh) - basic_machine=sh-hitachi - os=-hms - ;; - sh5el) - basic_machine=sh5le-unknown - ;; - sh64) - basic_machine=sh64-unknown - ;; - sparclite-wrs | simso-wrs) - basic_machine=sparclite-wrs - os=-vxworks - ;; - sps7) - basic_machine=m68k-bull - os=-sysv2 - ;; - spur) - basic_machine=spur-unknown - ;; - st2000) - basic_machine=m68k-tandem - ;; - stratus) - basic_machine=i860-stratus - os=-sysv4 - ;; - strongarm-* | thumb-*) - basic_machine=arm-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - sun2) - basic_machine=m68000-sun - ;; - sun2os3) - basic_machine=m68000-sun - os=-sunos3 - ;; - sun2os4) - basic_machine=m68000-sun - os=-sunos4 - ;; - sun3os3) - basic_machine=m68k-sun - os=-sunos3 - ;; - sun3os4) - basic_machine=m68k-sun - os=-sunos4 - ;; - sun4os3) - basic_machine=sparc-sun - os=-sunos3 - ;; - sun4os4) - basic_machine=sparc-sun - os=-sunos4 - ;; - sun4sol2) - basic_machine=sparc-sun - os=-solaris2 - ;; - sun3 | sun3-*) - basic_machine=m68k-sun - ;; - sun4) - basic_machine=sparc-sun - ;; - sun386 | sun386i | roadrunner) - basic_machine=i386-sun - ;; - sv1) - basic_machine=sv1-cray - os=-unicos - ;; - symmetry) - basic_machine=i386-sequent - os=-dynix - ;; - t3e) - basic_machine=alphaev5-cray - os=-unicos - ;; - t90) - basic_machine=t90-cray - os=-unicos - ;; - tile*) - basic_machine=$basic_machine-unknown - os=-linux-gnu - ;; - tx39) - basic_machine=mipstx39-unknown - ;; - tx39el) - basic_machine=mipstx39el-unknown - ;; - toad1) - basic_machine=pdp10-xkl - os=-tops20 - ;; - tower | tower-32) - basic_machine=m68k-ncr - ;; - tpf) - basic_machine=s390x-ibm - os=-tpf - ;; - udi29k) - basic_machine=a29k-amd - os=-udi - ;; - ultra3) - basic_machine=a29k-nyu - os=-sym1 - ;; - v810 | necv810) - basic_machine=v810-nec - os=-none - ;; - vaxv) - basic_machine=vax-dec - os=-sysv - ;; - vms) - basic_machine=vax-dec - os=-vms - ;; - vpp*|vx|vx-*) - basic_machine=f301-fujitsu - ;; - vxworks960) - basic_machine=i960-wrs - os=-vxworks - ;; - vxworks68) - basic_machine=m68k-wrs - os=-vxworks - ;; - vxworks29k) - basic_machine=a29k-wrs - os=-vxworks - ;; - w65*) - basic_machine=w65-wdc - os=-none - ;; - w89k-*) - basic_machine=hppa1.1-winbond - os=-proelf - ;; - xbox) - basic_machine=i686-pc - os=-mingw32 - ;; - xps | xps100) - basic_machine=xps100-honeywell - ;; - xscale-* | xscalee[bl]-*) - basic_machine=`echo $basic_machine | sed 's/^xscale/arm/'` - ;; - ymp) - basic_machine=ymp-cray - os=-unicos - ;; - z8k-*-coff) - basic_machine=z8k-unknown - os=-sim - ;; - z80-*-coff) - basic_machine=z80-unknown - os=-sim - ;; - none) - basic_machine=none-none - os=-none - ;; - -# Here we handle the default manufacturer of certain CPU types. It is in -# some cases the only manufacturer, in others, it is the most popular. - w89k) - basic_machine=hppa1.1-winbond - ;; - op50n) - basic_machine=hppa1.1-oki - ;; - op60c) - basic_machine=hppa1.1-oki - ;; - romp) - basic_machine=romp-ibm - ;; - mmix) - basic_machine=mmix-knuth - ;; - rs6000) - basic_machine=rs6000-ibm - ;; - vax) - basic_machine=vax-dec - ;; - pdp10) - # there are many clones, so DEC is not a safe bet - basic_machine=pdp10-unknown - ;; - pdp11) - basic_machine=pdp11-dec - ;; - we32k) - basic_machine=we32k-att - ;; - sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele) - basic_machine=sh-unknown - ;; - sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v) - basic_machine=sparc-sun - ;; - cydra) - basic_machine=cydra-cydrome - ;; - orion) - basic_machine=orion-highlevel - ;; - orion105) - basic_machine=clipper-highlevel - ;; - mac | mpw | mac-mpw) - basic_machine=m68k-apple - ;; - pmac | pmac-mpw) - basic_machine=powerpc-apple - ;; - *-unknown) - # Make sure to match an already-canonicalized machine name. - ;; - *) - echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 - exit 1 - ;; -esac - -# Here we canonicalize certain aliases for manufacturers. -case $basic_machine in - *-digital*) - basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` - ;; - *-commodore*) - basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` - ;; - *) - ;; -esac - -# Decode manufacturer-specific aliases for certain operating systems. - -if [ x"$os" != x"" ] -then -case $os in - # First match some system type aliases - # that might get confused with valid system types. - # -solaris* is a basic system type, with this one exception. - -auroraux) - os=-auroraux - ;; - -solaris1 | -solaris1.*) - os=`echo $os | sed -e 's|solaris1|sunos4|'` - ;; - -solaris) - os=-solaris2 - ;; - -svr4*) - os=-sysv4 - ;; - -unixware*) - os=-sysv4.2uw - ;; - -gnu/linux*) - os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` - ;; - # First accept the basic system types. - # The portable systems comes first. - # Each alternative MUST END IN A *, to match a version number. - # -sysv* is not here because it comes later, after sysvr4. - -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ - | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\ - | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \ - | -sym* | -kopensolaris* \ - | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ - | -aos* | -aros* \ - | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ - | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ - | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \ - | -openbsd* | -solidbsd* \ - | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \ - | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ - | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ - | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ - | -chorusos* | -chorusrdb* | -cegcc* \ - | -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ - | -mingw32* | -linux-gnu* | -linux-android* \ - | -linux-newlib* | -linux-uclibc* \ - | -uxpv* | -beos* | -mpeix* | -udk* \ - | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \ - | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ - | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ - | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ - | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ - | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \ - | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es*) - # Remember, each alternative MUST END IN *, to match a version number. - ;; - -qnx*) - case $basic_machine in - x86-* | i*86-*) - ;; - *) - os=-nto$os - ;; - esac - ;; - -nto-qnx*) - ;; - -nto*) - os=`echo $os | sed -e 's|nto|nto-qnx|'` - ;; - -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ - | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \ - | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) - ;; - -mac*) - os=`echo $os | sed -e 's|mac|macos|'` - ;; - -linux-dietlibc) - os=-linux-dietlibc - ;; - -linux*) - os=`echo $os | sed -e 's|linux|linux-gnu|'` - ;; - -sunos5*) - os=`echo $os | sed -e 's|sunos5|solaris2|'` - ;; - -sunos6*) - os=`echo $os | sed -e 's|sunos6|solaris3|'` - ;; - -opened*) - os=-openedition - ;; - -os400*) - os=-os400 - ;; - -wince*) - os=-wince - ;; - -osfrose*) - os=-osfrose - ;; - -osf*) - os=-osf - ;; - -utek*) - os=-bsd - ;; - -dynix*) - os=-bsd - ;; - -acis*) - os=-aos - ;; - -atheos*) - os=-atheos - ;; - -syllable*) - os=-syllable - ;; - -386bsd) - os=-bsd - ;; - -ctix* | -uts*) - os=-sysv - ;; - -nova*) - os=-rtmk-nova - ;; - -ns2 ) - os=-nextstep2 - ;; - -nsk*) - os=-nsk - ;; - # Preserve the version number of sinix5. - -sinix5.*) - os=`echo $os | sed -e 's|sinix|sysv|'` - ;; - -sinix*) - os=-sysv4 - ;; - -tpf*) - os=-tpf - ;; - -triton*) - os=-sysv3 - ;; - -oss*) - os=-sysv3 - ;; - -svr4) - os=-sysv4 - ;; - -svr3) - os=-sysv3 - ;; - -sysvr4) - os=-sysv4 - ;; - # This must come after -sysvr4. - -sysv*) - ;; - -ose*) - os=-ose - ;; - -es1800*) - os=-ose - ;; - -xenix) - os=-xenix - ;; - -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) - os=-mint - ;; - -aros*) - os=-aros - ;; - -kaos*) - os=-kaos - ;; - -zvmoe) - os=-zvmoe - ;; - -dicos*) - os=-dicos - ;; - -nacl*) - ;; - -none) - ;; - *) - # Get rid of the `-' at the beginning of $os. - os=`echo $os | sed 's/[^-]*-//'` - echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 - exit 1 - ;; -esac -else - -# Here we handle the default operating systems that come with various machines. -# The value should be what the vendor currently ships out the door with their -# machine or put another way, the most popular os provided with the machine. - -# Note that if you're going to try to match "-MANUFACTURER" here (say, -# "-sun"), then you have to tell the case statement up towards the top -# that MANUFACTURER isn't an operating system. Otherwise, code above -# will signal an error saying that MANUFACTURER isn't an operating -# system, and we'll never get to this point. - -case $basic_machine in - score-*) - os=-elf - ;; - spu-*) - os=-elf - ;; - *-acorn) - os=-riscix1.2 - ;; - arm*-rebel) - os=-linux - ;; - arm*-semi) - os=-aout - ;; - c4x-* | tic4x-*) - os=-coff - ;; - tic54x-*) - os=-coff - ;; - tic55x-*) - os=-coff - ;; - tic6x-*) - os=-coff - ;; - # This must come before the *-dec entry. - pdp10-*) - os=-tops20 - ;; - pdp11-*) - os=-none - ;; - *-dec | vax-*) - os=-ultrix4.2 - ;; - m68*-apollo) - os=-domain - ;; - i386-sun) - os=-sunos4.0.2 - ;; - m68000-sun) - os=-sunos3 - # This also exists in the configure program, but was not the - # default. - # os=-sunos4 - ;; - m68*-cisco) - os=-aout - ;; - mep-*) - os=-elf - ;; - mips*-cisco) - os=-elf - ;; - mips*-*) - os=-elf - ;; - or32-*) - os=-coff - ;; - *-tti) # must be before sparc entry or we get the wrong os. - os=-sysv3 - ;; - sparc-* | *-sun) - os=-sunos4.1.1 - ;; - *-be) - os=-beos - ;; - *-haiku) - os=-haiku - ;; - *-ibm) - os=-aix - ;; - *-knuth) - os=-mmixware - ;; - *-wec) - os=-proelf - ;; - *-winbond) - os=-proelf - ;; - *-oki) - os=-proelf - ;; - *-hp) - os=-hpux - ;; - *-hitachi) - os=-hiux - ;; - i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) - os=-sysv - ;; - *-cbm) - os=-amigaos - ;; - *-dg) - os=-dgux - ;; - *-dolphin) - os=-sysv3 - ;; - m68k-ccur) - os=-rtu - ;; - m88k-omron*) - os=-luna - ;; - *-next ) - os=-nextstep - ;; - *-sequent) - os=-ptx - ;; - *-crds) - os=-unos - ;; - *-ns) - os=-genix - ;; - i370-*) - os=-mvs - ;; - *-next) - os=-nextstep3 - ;; - *-gould) - os=-sysv - ;; - *-highlevel) - os=-bsd - ;; - *-encore) - os=-bsd - ;; - *-sgi) - os=-irix - ;; - *-siemens) - os=-sysv4 - ;; - *-masscomp) - os=-rtu - ;; - f30[01]-fujitsu | f700-fujitsu) - os=-uxpv - ;; - *-rom68k) - os=-coff - ;; - *-*bug) - os=-coff - ;; - *-apple) - os=-macos - ;; - *-atari*) - os=-mint - ;; - *) - os=-none - ;; -esac -fi - -# Here we handle the case where we know the os, and the CPU type, but not the -# manufacturer. We pick the logical manufacturer. -vendor=unknown -case $basic_machine in - *-unknown) - case $os in - -riscix*) - vendor=acorn - ;; - -sunos*) - vendor=sun - ;; - -cnk*|-aix*) - vendor=ibm - ;; - -beos*) - vendor=be - ;; - -hpux*) - vendor=hp - ;; - -mpeix*) - vendor=hp - ;; - -hiux*) - vendor=hitachi - ;; - -unos*) - vendor=crds - ;; - -dgux*) - vendor=dg - ;; - -luna*) - vendor=omron - ;; - -genix*) - vendor=ns - ;; - -mvs* | -opened*) - vendor=ibm - ;; - -os400*) - vendor=ibm - ;; - -ptx*) - vendor=sequent - ;; - -tpf*) - vendor=ibm - ;; - -vxsim* | -vxworks* | -windiss*) - vendor=wrs - ;; - -aux*) - vendor=apple - ;; - -hms*) - vendor=hitachi - ;; - -mpw* | -macos*) - vendor=apple - ;; - -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) - vendor=atari - ;; - -vos*) - vendor=stratus - ;; - esac - basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` - ;; -esac - -echo $basic_machine$os -exit - -# Local variables: -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "timestamp='" -# time-stamp-format: "%:y-%02m-%02d" -# time-stamp-end: "'" -# End: diff --git a/jpeg/configure b/jpeg/configure deleted file mode 100755 index 9ba1383..0000000 --- a/jpeg/configure +++ /dev/null @@ -1,15928 +0,0 @@ -#! /bin/sh -# Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.68 for libjpeg 8.4.0. -# -# -# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, -# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software -# Foundation, Inc. -# -# -# This configure script is free software; the Free Software Foundation -# gives unlimited permission to copy, distribute and modify it. -## -------------------- ## -## M4sh Initialization. ## -## -------------------- ## - -# Be more Bourne compatible -DUALCASE=1; export DUALCASE # for MKS sh -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in #( - *posix*) : - set -o posix ;; #( - *) : - ;; -esac -fi - - -as_nl=' -' -export as_nl -# Printing a long string crashes Solaris 7 /usr/bin/printf. -as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo -# Prefer a ksh shell builtin over an external printf program on Solaris, -# but without wasting forks for bash or zsh. -if test -z "$BASH_VERSION$ZSH_VERSION" \ - && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='print -r --' - as_echo_n='print -rn --' -elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='printf %s\n' - as_echo_n='printf %s' -else - if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then - as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' - as_echo_n='/usr/ucb/echo -n' - else - as_echo_body='eval expr "X$1" : "X\\(.*\\)"' - as_echo_n_body='eval - arg=$1; - case $arg in #( - *"$as_nl"*) - expr "X$arg" : "X\\(.*\\)$as_nl"; - arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; - esac; - expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" - ' - export as_echo_n_body - as_echo_n='sh -c $as_echo_n_body as_echo' - fi - export as_echo_body - as_echo='sh -c $as_echo_body as_echo' -fi - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - PATH_SEPARATOR=: - (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { - (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || - PATH_SEPARATOR=';' - } -fi - - -# IFS -# We need space, tab and new line, in precisely that order. Quoting is -# there to prevent editors from complaining about space-tab. -# (If _AS_PATH_WALK were called with IFS unset, it would disable word -# splitting by setting IFS to empty value.) -IFS=" "" $as_nl" - -# Find who we are. Look in the path if we contain no directory separator. -as_myself= -case $0 in #(( - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break - done -IFS=$as_save_IFS - - ;; -esac -# We did not find ourselves, most probably we were run as `sh COMMAND' -# in which case we are not to be found in the path. -if test "x$as_myself" = x; then - as_myself=$0 -fi -if test ! -f "$as_myself"; then - $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 - exit 1 -fi - -# Unset variables that we do not need and which cause bugs (e.g. in -# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" -# suppresses any "Segmentation fault" message there. '((' could -# trigger a bug in pdksh 5.2.14. -for as_var in BASH_ENV ENV MAIL MAILPATH -do eval test x\${$as_var+set} = xset \ - && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : -done -PS1='$ ' -PS2='> ' -PS4='+ ' - -# NLS nuisances. -LC_ALL=C -export LC_ALL -LANGUAGE=C -export LANGUAGE - -# CDPATH. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -if test "x$CONFIG_SHELL" = x; then - as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which - # is contrary to our usage. Disable this feature. - alias -g '\${1+\"\$@\"}'='\"\$@\"' - setopt NO_GLOB_SUBST -else - case \`(set -o) 2>/dev/null\` in #( - *posix*) : - set -o posix ;; #( - *) : - ;; -esac -fi -" - as_required="as_fn_return () { (exit \$1); } -as_fn_success () { as_fn_return 0; } -as_fn_failure () { as_fn_return 1; } -as_fn_ret_success () { return 0; } -as_fn_ret_failure () { return 1; } - -exitcode=0 -as_fn_success || { exitcode=1; echo as_fn_success failed.; } -as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } -as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } -as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } -if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : - -else - exitcode=1; echo positional parameters were not saved. -fi -test x\$exitcode = x0 || exit 1" - as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO - as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO - eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && - test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 -test \$(( 1 + 1 )) = 2 || exit 1 - - test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || ( - ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' - ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO - ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO - PATH=/empty FPATH=/empty; export PATH FPATH - test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\ - || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1" - if (eval "$as_required") 2>/dev/null; then : - as_have_required=yes -else - as_have_required=no -fi - if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : - -else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -as_found=false -for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - as_found=: - case $as_dir in #( - /*) - for as_base in sh bash ksh sh5; do - # Try only shells that exist, to save several forks. - as_shell=$as_dir/$as_base - if { test -f "$as_shell" || test -f "$as_shell.exe"; } && - { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : - CONFIG_SHELL=$as_shell as_have_required=yes - if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : - break 2 -fi -fi - done;; - esac - as_found=false -done -$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && - { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : - CONFIG_SHELL=$SHELL as_have_required=yes -fi; } -IFS=$as_save_IFS - - - if test "x$CONFIG_SHELL" != x; then : - # We cannot yet assume a decent shell, so we have to provide a - # neutralization value for shells without unset; and this also - # works around shells that cannot unset nonexistent variables. - # Preserve -v and -x to the replacement shell. - BASH_ENV=/dev/null - ENV=/dev/null - (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV - export CONFIG_SHELL - case $- in # (((( - *v*x* | *x*v* ) as_opts=-vx ;; - *v* ) as_opts=-v ;; - *x* ) as_opts=-x ;; - * ) as_opts= ;; - esac - exec "$CONFIG_SHELL" $as_opts "$as_myself" ${1+"$@"} -fi - - if test x$as_have_required = xno; then : - $as_echo "$0: This script requires a shell more modern than all" - $as_echo "$0: the shells that I found on your system." - if test x${ZSH_VERSION+set} = xset ; then - $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" - $as_echo "$0: be upgraded to zsh 4.3.4 or later." - else - $as_echo "$0: Please tell bug-autoconf@gnu.org about your system, -$0: including any error possibly output before this -$0: message. Then install a modern shell, or manually run -$0: the script under such a shell if you do have one." - fi - exit 1 -fi -fi -fi -SHELL=${CONFIG_SHELL-/bin/sh} -export SHELL -# Unset more variables known to interfere with behavior of common tools. -CLICOLOR_FORCE= GREP_OPTIONS= -unset CLICOLOR_FORCE GREP_OPTIONS - -## --------------------- ## -## M4sh Shell Functions. ## -## --------------------- ## -# as_fn_unset VAR -# --------------- -# Portably unset VAR. -as_fn_unset () -{ - { eval $1=; unset $1;} -} -as_unset=as_fn_unset - -# as_fn_set_status STATUS -# ----------------------- -# Set $? to STATUS, without forking. -as_fn_set_status () -{ - return $1 -} # as_fn_set_status - -# as_fn_exit STATUS -# ----------------- -# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. -as_fn_exit () -{ - set +e - as_fn_set_status $1 - exit $1 -} # as_fn_exit - -# as_fn_mkdir_p -# ------------- -# Create "$as_dir" as a directory, including parents if necessary. -as_fn_mkdir_p () -{ - - case $as_dir in #( - -*) as_dir=./$as_dir;; - esac - test -d "$as_dir" || eval $as_mkdir_p || { - as_dirs= - while :; do - case $as_dir in #( - *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( - *) as_qdir=$as_dir;; - esac - as_dirs="'$as_qdir' $as_dirs" - as_dir=`$as_dirname -- "$as_dir" || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - test -d "$as_dir" && break - done - test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" - - -} # as_fn_mkdir_p -# as_fn_append VAR VALUE -# ---------------------- -# Append the text in VALUE to the end of the definition contained in VAR. Take -# advantage of any shell optimizations that allow amortized linear growth over -# repeated appends, instead of the typical quadratic growth present in naive -# implementations. -if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : - eval 'as_fn_append () - { - eval $1+=\$2 - }' -else - as_fn_append () - { - eval $1=\$$1\$2 - } -fi # as_fn_append - -# as_fn_arith ARG... -# ------------------ -# Perform arithmetic evaluation on the ARGs, and store the result in the -# global $as_val. Take advantage of shells that can avoid forks. The arguments -# must be portable across $(()) and expr. -if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : - eval 'as_fn_arith () - { - as_val=$(( $* )) - }' -else - as_fn_arith () - { - as_val=`expr "$@" || test $? -eq 1` - } -fi # as_fn_arith - - -# as_fn_error STATUS ERROR [LINENO LOG_FD] -# ---------------------------------------- -# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are -# provided, also output the error to LOG_FD, referencing LINENO. Then exit the -# script with STATUS, using 1 if that was 0. -as_fn_error () -{ - as_status=$1; test $as_status -eq 0 && as_status=1 - if test "$4"; then - as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 - fi - $as_echo "$as_me: error: $2" >&2 - as_fn_exit $as_status -} # as_fn_error - -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi - -if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi - -if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then - as_dirname=dirname -else - as_dirname=false -fi - -as_me=`$as_basename -- "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ - s//\1/ - q - } - /^X\/\(\/\/\)$/{ - s//\1/ - q - } - /^X\/\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - - - as_lineno_1=$LINENO as_lineno_1a=$LINENO - as_lineno_2=$LINENO as_lineno_2a=$LINENO - eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && - test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { - # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) - sed -n ' - p - /[$]LINENO/= - ' <$as_myself | - sed ' - s/[$]LINENO.*/&-/ - t lineno - b - :lineno - N - :loop - s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ - t loop - s/-\n.*// - ' >$as_me.lineno && - chmod +x "$as_me.lineno" || - { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } - - # Don't try to exec as it changes $[0], causing all sort of problems - # (the dirname of $[0] is not the place where we might find the - # original and so on. Autoconf is especially sensitive to this). - . "./$as_me.lineno" - # Exit status is that of the last command. - exit -} - -ECHO_C= ECHO_N= ECHO_T= -case `echo -n x` in #((((( --n*) - case `echo 'xy\c'` in - *c*) ECHO_T=' ';; # ECHO_T is single tab character. - xy) ECHO_C='\c';; - *) echo `echo ksh88 bug on AIX 6.1` > /dev/null - ECHO_T=' ';; - esac;; -*) - ECHO_N='-n';; -esac - -rm -f conf$$ conf$$.exe conf$$.file -if test -d conf$$.dir; then - rm -f conf$$.dir/conf$$.file -else - rm -f conf$$.dir - mkdir conf$$.dir 2>/dev/null -fi -if (echo >conf$$.file) 2>/dev/null; then - if ln -s conf$$.file conf$$ 2>/dev/null; then - as_ln_s='ln -s' - # ... but there are two gotchas: - # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. - # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. - # In both cases, we have to default to `cp -p'. - ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || - as_ln_s='cp -p' - elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln - else - as_ln_s='cp -p' - fi -else - as_ln_s='cp -p' -fi -rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file -rmdir conf$$.dir 2>/dev/null - -if mkdir -p . 2>/dev/null; then - as_mkdir_p='mkdir -p "$as_dir"' -else - test -d ./-p && rmdir ./-p - as_mkdir_p=false -fi - -if test -x / >/dev/null 2>&1; then - as_test_x='test -x' -else - if ls -dL / >/dev/null 2>&1; then - as_ls_L_option=L - else - as_ls_L_option= - fi - as_test_x=' - eval sh -c '\'' - if test -d "$1"; then - test -d "$1/."; - else - case $1 in #( - -*)set "./$1";; - esac; - case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #(( - ???[sx]*):;;*)false;;esac;fi - '\'' sh - ' -fi -as_executable_p=$as_test_x - -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" - -# Sed expression to map a string onto a valid variable name. -as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - -SHELL=${CONFIG_SHELL-/bin/sh} - - -test -n "$DJDIR" || exec 7<&0 &1 - -# Name of the host. -# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, -# so uname gets run too. -ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` - -# -# Initializations. -# -ac_default_prefix=/usr/local -ac_clean_files= -ac_config_libobj_dir=. -LIBOBJS= -cross_compiling=no -subdirs= -MFLAGS= -MAKEFLAGS= - -# Identity of this package. -PACKAGE_NAME='libjpeg' -PACKAGE_TARNAME='libjpeg' -PACKAGE_VERSION='8.4.0' -PACKAGE_STRING='libjpeg 8.4.0' -PACKAGE_BUGREPORT='' -PACKAGE_URL='' - -# Factoring default headers for most tests. -ac_includes_default="\ -#include -#ifdef HAVE_SYS_TYPES_H -# include -#endif -#ifdef HAVE_SYS_STAT_H -# include -#endif -#ifdef STDC_HEADERS -# include -# include -#else -# ifdef HAVE_STDLIB_H -# include -# endif -#endif -#ifdef HAVE_STRING_H -# if !defined STDC_HEADERS && defined HAVE_MEMORY_H -# include -# endif -# include -#endif -#ifdef HAVE_STRINGS_H -# include -#endif -#ifdef HAVE_INTTYPES_H -# include -#endif -#ifdef HAVE_STDINT_H -# include -#endif -#ifdef HAVE_UNISTD_H -# include -#endif" - -ac_subst_vars='am__EXEEXT_FALSE -am__EXEEXT_TRUE -LTLIBOBJS -LIBOBJS -JPEG_LIB_VERSION -MEMORYMGR -OTOOL64 -OTOOL -LIPO -NMEDIT -DSYMUTIL -MANIFEST_TOOL -RANLIB -ac_ct_AR -AR -NM -ac_ct_DUMPBIN -DUMPBIN -LD -FGREP -SED -LIBTOOL -OBJDUMP -DLLTOOL -AS -HAVE_LD_VERSION_SCRIPT_FALSE -HAVE_LD_VERSION_SCRIPT_TRUE -LN_S -MAINT -MAINTAINER_MODE_FALSE -MAINTAINER_MODE_TRUE -ANSI2KNR -U -EGREP -GREP -CPP -am__fastdepCC_FALSE -am__fastdepCC_TRUE -CCDEPMODE -am__nodep -AMDEPBACKSLASH -AMDEP_FALSE -AMDEP_TRUE -am__quote -am__include -DEPDIR -OBJEXT -EXEEXT -ac_ct_CC -CPPFLAGS -LDFLAGS -CFLAGS -CC -AM_BACKSLASH -AM_DEFAULT_VERBOSITY -am__untar -am__tar -AMTAR -am__leading_dot -SET_MAKE -AWK -mkdir_p -MKDIR_P -INSTALL_STRIP_PROGRAM -STRIP -install_sh -MAKEINFO -AUTOHEADER -AUTOMAKE -AUTOCONF -ACLOCAL -VERSION -PACKAGE -CYGPATH_W -am__isrc -INSTALL_DATA -INSTALL_SCRIPT -INSTALL_PROGRAM -target_os -target_vendor -target_cpu -target -host_os -host_vendor -host_cpu -host -build_os -build_vendor -build_cpu -build -target_alias -host_alias -build_alias -LIBS -ECHO_T -ECHO_N -ECHO_C -DEFS -mandir -localedir -libdir -psdir -pdfdir -dvidir -htmldir -infodir -docdir -oldincludedir -includedir -localstatedir -sharedstatedir -sysconfdir -datadir -datarootdir -libexecdir -sbindir -bindir -program_transform_name -prefix -exec_prefix -PACKAGE_URL -PACKAGE_BUGREPORT -PACKAGE_STRING -PACKAGE_VERSION -PACKAGE_TARNAME -PACKAGE_NAME -PATH_SEPARATOR -SHELL' -ac_subst_files='' -ac_user_opts=' -enable_option_checking -enable_silent_rules -enable_dependency_tracking -enable_maintainer_mode -enable_ld_version_script -enable_shared -enable_static -with_pic -enable_fast_install -with_gnu_ld -with_sysroot -enable_libtool_lock -enable_maxmem -' - ac_precious_vars='build_alias -host_alias -target_alias -CC -CFLAGS -LDFLAGS -LIBS -CPPFLAGS -CPP' - - -# Initialize some variables set by options. -ac_init_help= -ac_init_version=false -ac_unrecognized_opts= -ac_unrecognized_sep= -# The variables have the same names as the options, with -# dashes changed to underlines. -cache_file=/dev/null -exec_prefix=NONE -no_create= -no_recursion= -prefix=NONE -program_prefix=NONE -program_suffix=NONE -program_transform_name=s,x,x, -silent= -site= -srcdir= -verbose= -x_includes=NONE -x_libraries=NONE - -# Installation directory options. -# These are left unexpanded so users can "make install exec_prefix=/foo" -# and all the variables that are supposed to be based on exec_prefix -# by default will actually change. -# Use braces instead of parens because sh, perl, etc. also accept them. -# (The list follows the same order as the GNU Coding Standards.) -bindir='${exec_prefix}/bin' -sbindir='${exec_prefix}/sbin' -libexecdir='${exec_prefix}/libexec' -datarootdir='${prefix}/share' -datadir='${datarootdir}' -sysconfdir='${prefix}/etc' -sharedstatedir='${prefix}/com' -localstatedir='${prefix}/var' -includedir='${prefix}/include' -oldincludedir='/usr/include' -docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' -infodir='${datarootdir}/info' -htmldir='${docdir}' -dvidir='${docdir}' -pdfdir='${docdir}' -psdir='${docdir}' -libdir='${exec_prefix}/lib' -localedir='${datarootdir}/locale' -mandir='${datarootdir}/man' - -ac_prev= -ac_dashdash= -for ac_option -do - # If the previous option needs an argument, assign it. - if test -n "$ac_prev"; then - eval $ac_prev=\$ac_option - ac_prev= - continue - fi - - case $ac_option in - *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; - *=) ac_optarg= ;; - *) ac_optarg=yes ;; - esac - - # Accept the important Cygnus configure options, so we can diagnose typos. - - case $ac_dashdash$ac_option in - --) - ac_dashdash=yes ;; - - -bindir | --bindir | --bindi | --bind | --bin | --bi) - ac_prev=bindir ;; - -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) - bindir=$ac_optarg ;; - - -build | --build | --buil | --bui | --bu) - ac_prev=build_alias ;; - -build=* | --build=* | --buil=* | --bui=* | --bu=*) - build_alias=$ac_optarg ;; - - -cache-file | --cache-file | --cache-fil | --cache-fi \ - | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) - ac_prev=cache_file ;; - -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ - | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) - cache_file=$ac_optarg ;; - - --config-cache | -C) - cache_file=config.cache ;; - - -datadir | --datadir | --datadi | --datad) - ac_prev=datadir ;; - -datadir=* | --datadir=* | --datadi=* | --datad=*) - datadir=$ac_optarg ;; - - -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ - | --dataroo | --dataro | --datar) - ac_prev=datarootdir ;; - -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ - | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) - datarootdir=$ac_optarg ;; - - -disable-* | --disable-*) - ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid feature name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"enable_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval enable_$ac_useropt=no ;; - - -docdir | --docdir | --docdi | --doc | --do) - ac_prev=docdir ;; - -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) - docdir=$ac_optarg ;; - - -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) - ac_prev=dvidir ;; - -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) - dvidir=$ac_optarg ;; - - -enable-* | --enable-*) - ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid feature name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"enable_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval enable_$ac_useropt=\$ac_optarg ;; - - -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ - | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ - | --exec | --exe | --ex) - ac_prev=exec_prefix ;; - -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ - | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ - | --exec=* | --exe=* | --ex=*) - exec_prefix=$ac_optarg ;; - - -gas | --gas | --ga | --g) - # Obsolete; use --with-gas. - with_gas=yes ;; - - -help | --help | --hel | --he | -h) - ac_init_help=long ;; - -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) - ac_init_help=recursive ;; - -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) - ac_init_help=short ;; - - -host | --host | --hos | --ho) - ac_prev=host_alias ;; - -host=* | --host=* | --hos=* | --ho=*) - host_alias=$ac_optarg ;; - - -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) - ac_prev=htmldir ;; - -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ - | --ht=*) - htmldir=$ac_optarg ;; - - -includedir | --includedir | --includedi | --included | --include \ - | --includ | --inclu | --incl | --inc) - ac_prev=includedir ;; - -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ - | --includ=* | --inclu=* | --incl=* | --inc=*) - includedir=$ac_optarg ;; - - -infodir | --infodir | --infodi | --infod | --info | --inf) - ac_prev=infodir ;; - -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) - infodir=$ac_optarg ;; - - -libdir | --libdir | --libdi | --libd) - ac_prev=libdir ;; - -libdir=* | --libdir=* | --libdi=* | --libd=*) - libdir=$ac_optarg ;; - - -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ - | --libexe | --libex | --libe) - ac_prev=libexecdir ;; - -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ - | --libexe=* | --libex=* | --libe=*) - libexecdir=$ac_optarg ;; - - -localedir | --localedir | --localedi | --localed | --locale) - ac_prev=localedir ;; - -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) - localedir=$ac_optarg ;; - - -localstatedir | --localstatedir | --localstatedi | --localstated \ - | --localstate | --localstat | --localsta | --localst | --locals) - ac_prev=localstatedir ;; - -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ - | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) - localstatedir=$ac_optarg ;; - - -mandir | --mandir | --mandi | --mand | --man | --ma | --m) - ac_prev=mandir ;; - -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) - mandir=$ac_optarg ;; - - -nfp | --nfp | --nf) - # Obsolete; use --without-fp. - with_fp=no ;; - - -no-create | --no-create | --no-creat | --no-crea | --no-cre \ - | --no-cr | --no-c | -n) - no_create=yes ;; - - -no-recursion | --no-recursion | --no-recursio | --no-recursi \ - | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) - no_recursion=yes ;; - - -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ - | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ - | --oldin | --oldi | --old | --ol | --o) - ac_prev=oldincludedir ;; - -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ - | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ - | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) - oldincludedir=$ac_optarg ;; - - -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) - ac_prev=prefix ;; - -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) - prefix=$ac_optarg ;; - - -program-prefix | --program-prefix | --program-prefi | --program-pref \ - | --program-pre | --program-pr | --program-p) - ac_prev=program_prefix ;; - -program-prefix=* | --program-prefix=* | --program-prefi=* \ - | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) - program_prefix=$ac_optarg ;; - - -program-suffix | --program-suffix | --program-suffi | --program-suff \ - | --program-suf | --program-su | --program-s) - ac_prev=program_suffix ;; - -program-suffix=* | --program-suffix=* | --program-suffi=* \ - | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) - program_suffix=$ac_optarg ;; - - -program-transform-name | --program-transform-name \ - | --program-transform-nam | --program-transform-na \ - | --program-transform-n | --program-transform- \ - | --program-transform | --program-transfor \ - | --program-transfo | --program-transf \ - | --program-trans | --program-tran \ - | --progr-tra | --program-tr | --program-t) - ac_prev=program_transform_name ;; - -program-transform-name=* | --program-transform-name=* \ - | --program-transform-nam=* | --program-transform-na=* \ - | --program-transform-n=* | --program-transform-=* \ - | --program-transform=* | --program-transfor=* \ - | --program-transfo=* | --program-transf=* \ - | --program-trans=* | --program-tran=* \ - | --progr-tra=* | --program-tr=* | --program-t=*) - program_transform_name=$ac_optarg ;; - - -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) - ac_prev=pdfdir ;; - -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) - pdfdir=$ac_optarg ;; - - -psdir | --psdir | --psdi | --psd | --ps) - ac_prev=psdir ;; - -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) - psdir=$ac_optarg ;; - - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - silent=yes ;; - - -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) - ac_prev=sbindir ;; - -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ - | --sbi=* | --sb=*) - sbindir=$ac_optarg ;; - - -sharedstatedir | --sharedstatedir | --sharedstatedi \ - | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ - | --sharedst | --shareds | --shared | --share | --shar \ - | --sha | --sh) - ac_prev=sharedstatedir ;; - -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ - | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ - | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ - | --sha=* | --sh=*) - sharedstatedir=$ac_optarg ;; - - -site | --site | --sit) - ac_prev=site ;; - -site=* | --site=* | --sit=*) - site=$ac_optarg ;; - - -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) - ac_prev=srcdir ;; - -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) - srcdir=$ac_optarg ;; - - -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ - | --syscon | --sysco | --sysc | --sys | --sy) - ac_prev=sysconfdir ;; - -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ - | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) - sysconfdir=$ac_optarg ;; - - -target | --target | --targe | --targ | --tar | --ta | --t) - ac_prev=target_alias ;; - -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) - target_alias=$ac_optarg ;; - - -v | -verbose | --verbose | --verbos | --verbo | --verb) - verbose=yes ;; - - -version | --version | --versio | --versi | --vers | -V) - ac_init_version=: ;; - - -with-* | --with-*) - ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid package name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"with_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval with_$ac_useropt=\$ac_optarg ;; - - -without-* | --without-*) - ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid package name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"with_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval with_$ac_useropt=no ;; - - --x) - # Obsolete; use --with-x. - with_x=yes ;; - - -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ - | --x-incl | --x-inc | --x-in | --x-i) - ac_prev=x_includes ;; - -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ - | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) - x_includes=$ac_optarg ;; - - -x-libraries | --x-libraries | --x-librarie | --x-librari \ - | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) - ac_prev=x_libraries ;; - -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ - | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) - x_libraries=$ac_optarg ;; - - -*) as_fn_error $? "unrecognized option: \`$ac_option' -Try \`$0 --help' for more information" - ;; - - *=*) - ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` - # Reject names that are not valid shell variable names. - case $ac_envvar in #( - '' | [0-9]* | *[!_$as_cr_alnum]* ) - as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; - esac - eval $ac_envvar=\$ac_optarg - export $ac_envvar ;; - - *) - # FIXME: should be removed in autoconf 3.0. - $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 - expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && - $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 - : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}" - ;; - - esac -done - -if test -n "$ac_prev"; then - ac_option=--`echo $ac_prev | sed 's/_/-/g'` - as_fn_error $? "missing argument to $ac_option" -fi - -if test -n "$ac_unrecognized_opts"; then - case $enable_option_checking in - no) ;; - fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; - *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; - esac -fi - -# Check all directory arguments for consistency. -for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ - datadir sysconfdir sharedstatedir localstatedir includedir \ - oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ - libdir localedir mandir -do - eval ac_val=\$$ac_var - # Remove trailing slashes. - case $ac_val in - */ ) - ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` - eval $ac_var=\$ac_val;; - esac - # Be sure to have absolute directory names. - case $ac_val in - [\\/$]* | ?:[\\/]* ) continue;; - NONE | '' ) case $ac_var in *prefix ) continue;; esac;; - esac - as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" -done - -# There might be people who depend on the old broken behavior: `$host' -# used to hold the argument of --host etc. -# FIXME: To remove some day. -build=$build_alias -host=$host_alias -target=$target_alias - -# FIXME: To remove some day. -if test "x$host_alias" != x; then - if test "x$build_alias" = x; then - cross_compiling=maybe - $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host. - If a cross compiler is detected then cross compile mode will be used" >&2 - elif test "x$build_alias" != "x$host_alias"; then - cross_compiling=yes - fi -fi - -ac_tool_prefix= -test -n "$host_alias" && ac_tool_prefix=$host_alias- - -test "$silent" = yes && exec 6>/dev/null - - -ac_pwd=`pwd` && test -n "$ac_pwd" && -ac_ls_di=`ls -di .` && -ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || - as_fn_error $? "working directory cannot be determined" -test "X$ac_ls_di" = "X$ac_pwd_ls_di" || - as_fn_error $? "pwd does not report name of working directory" - - -# Find the source files, if location was not specified. -if test -z "$srcdir"; then - ac_srcdir_defaulted=yes - # Try the directory containing this script, then the parent directory. - ac_confdir=`$as_dirname -- "$as_myself" || -$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_myself" : 'X\(//\)[^/]' \| \ - X"$as_myself" : 'X\(//\)$' \| \ - X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_myself" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - srcdir=$ac_confdir - if test ! -r "$srcdir/$ac_unique_file"; then - srcdir=.. - fi -else - ac_srcdir_defaulted=no -fi -if test ! -r "$srcdir/$ac_unique_file"; then - test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." - as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" -fi -ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" -ac_abs_confdir=`( - cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" - pwd)` -# When building in place, set srcdir=. -if test "$ac_abs_confdir" = "$ac_pwd"; then - srcdir=. -fi -# Remove unnecessary trailing slashes from srcdir. -# Double slashes in file names in object file debugging info -# mess up M-x gdb in Emacs. -case $srcdir in -*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; -esac -for ac_var in $ac_precious_vars; do - eval ac_env_${ac_var}_set=\${${ac_var}+set} - eval ac_env_${ac_var}_value=\$${ac_var} - eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} - eval ac_cv_env_${ac_var}_value=\$${ac_var} -done - -# -# Report the --help message. -# -if test "$ac_init_help" = "long"; then - # Omit some internal or obsolete options to make the list less imposing. - # This message is too long to be a string in the A/UX 3.1 sh. - cat <<_ACEOF -\`configure' configures libjpeg 8.4.0 to adapt to many kinds of systems. - -Usage: $0 [OPTION]... [VAR=VALUE]... - -To assign environment variables (e.g., CC, CFLAGS...), specify them as -VAR=VALUE. See below for descriptions of some of the useful variables. - -Defaults for the options are specified in brackets. - -Configuration: - -h, --help display this help and exit - --help=short display options specific to this package - --help=recursive display the short help of all the included packages - -V, --version display version information and exit - -q, --quiet, --silent do not print \`checking ...' messages - --cache-file=FILE cache test results in FILE [disabled] - -C, --config-cache alias for \`--cache-file=config.cache' - -n, --no-create do not create output files - --srcdir=DIR find the sources in DIR [configure dir or \`..'] - -Installation directories: - --prefix=PREFIX install architecture-independent files in PREFIX - [$ac_default_prefix] - --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX - [PREFIX] - -By default, \`make install' will install all the files in -\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify -an installation prefix other than \`$ac_default_prefix' using \`--prefix', -for instance \`--prefix=\$HOME'. - -For better control, use the options below. - -Fine tuning of the installation directories: - --bindir=DIR user executables [EPREFIX/bin] - --sbindir=DIR system admin executables [EPREFIX/sbin] - --libexecdir=DIR program executables [EPREFIX/libexec] - --sysconfdir=DIR read-only single-machine data [PREFIX/etc] - --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] - --localstatedir=DIR modifiable single-machine data [PREFIX/var] - --libdir=DIR object code libraries [EPREFIX/lib] - --includedir=DIR C header files [PREFIX/include] - --oldincludedir=DIR C header files for non-gcc [/usr/include] - --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] - --datadir=DIR read-only architecture-independent data [DATAROOTDIR] - --infodir=DIR info documentation [DATAROOTDIR/info] - --localedir=DIR locale-dependent data [DATAROOTDIR/locale] - --mandir=DIR man documentation [DATAROOTDIR/man] - --docdir=DIR documentation root [DATAROOTDIR/doc/libjpeg] - --htmldir=DIR html documentation [DOCDIR] - --dvidir=DIR dvi documentation [DOCDIR] - --pdfdir=DIR pdf documentation [DOCDIR] - --psdir=DIR ps documentation [DOCDIR] -_ACEOF - - cat <<\_ACEOF - -Program names: - --program-prefix=PREFIX prepend PREFIX to installed program names - --program-suffix=SUFFIX append SUFFIX to installed program names - --program-transform-name=PROGRAM run sed PROGRAM on installed program names - -System types: - --build=BUILD configure for building on BUILD [guessed] - --host=HOST cross-compile to build programs to run on HOST [BUILD] - --target=TARGET configure for building compilers for TARGET [HOST] -_ACEOF -fi - -if test -n "$ac_init_help"; then - case $ac_init_help in - short | recursive ) echo "Configuration of libjpeg 8.4.0:";; - esac - cat <<\_ACEOF - -Optional Features: - --disable-option-checking ignore unrecognized --enable/--with options - --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) - --enable-FEATURE[=ARG] include FEATURE [ARG=yes] - --enable-silent-rules less verbose build output (undo: `make V=1') - --disable-silent-rules verbose build output (undo: `make V=0') - --disable-dependency-tracking speeds up one-time build - --enable-dependency-tracking do not reject slow dependency extractors - --enable-maintainer-mode enable make rules and dependencies not useful - (and sometimes confusing) to the casual installer - --enable-ld-version-script - enable linker version script (default is enabled - when possible) - --enable-shared[=PKGS] build shared libraries [default=yes] - --enable-static[=PKGS] build static libraries [default=yes] - --enable-fast-install[=PKGS] - optimize for fast installation [default=yes] - --disable-libtool-lock avoid locking (might break parallel builds) - --enable-maxmem=N enable use of temp files, set max mem usage to N MB - -Optional Packages: - --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] - --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) - --with-pic[=PKGS] try to use only PIC/non-PIC objects [default=use - both] - --with-gnu-ld assume the C compiler uses GNU ld [default=no] - --with-sysroot=DIR Search for dependent libraries within DIR - (or the compiler's sysroot if not specified). - -Some influential environment variables: - CC C compiler command - CFLAGS C compiler flags - LDFLAGS linker flags, e.g. -L if you have libraries in a - nonstandard directory - LIBS libraries to pass to the linker, e.g. -l - CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if - you have headers in a nonstandard directory - CPP C preprocessor - -Use these variables to override the choices made by `configure' or to help -it to find libraries and programs with nonstandard names/locations. - -Report bugs to the package provider. -_ACEOF -ac_status=$? -fi - -if test "$ac_init_help" = "recursive"; then - # If there are subdirs, report their specific --help. - for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue - test -d "$ac_dir" || - { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || - continue - ac_builddir=. - -case "$ac_dir" in -.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; -*) - ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` - # A ".." for each directory in $ac_dir_suffix. - ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` - case $ac_top_builddir_sub in - "") ac_top_builddir_sub=. ac_top_build_prefix= ;; - *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; - esac ;; -esac -ac_abs_top_builddir=$ac_pwd -ac_abs_builddir=$ac_pwd$ac_dir_suffix -# for backward compatibility: -ac_top_builddir=$ac_top_build_prefix - -case $srcdir in - .) # We are building in place. - ac_srcdir=. - ac_top_srcdir=$ac_top_builddir_sub - ac_abs_top_srcdir=$ac_pwd ;; - [\\/]* | ?:[\\/]* ) # Absolute name. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir - ac_abs_top_srcdir=$srcdir ;; - *) # Relative name. - ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_build_prefix$srcdir - ac_abs_top_srcdir=$ac_pwd/$srcdir ;; -esac -ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix - - cd "$ac_dir" || { ac_status=$?; continue; } - # Check for guested configure. - if test -f "$ac_srcdir/configure.gnu"; then - echo && - $SHELL "$ac_srcdir/configure.gnu" --help=recursive - elif test -f "$ac_srcdir/configure"; then - echo && - $SHELL "$ac_srcdir/configure" --help=recursive - else - $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 - fi || ac_status=$? - cd "$ac_pwd" || { ac_status=$?; break; } - done -fi - -test -n "$ac_init_help" && exit $ac_status -if $ac_init_version; then - cat <<\_ACEOF -libjpeg configure 8.4.0 -generated by GNU Autoconf 2.68 - -Copyright (C) 2010 Free Software Foundation, Inc. -This configure script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it. -_ACEOF - exit -fi - -## ------------------------ ## -## Autoconf initialization. ## -## ------------------------ ## - -# ac_fn_c_try_compile LINENO -# -------------------------- -# Try to compile conftest.$ac_ext, and return whether this succeeded. -ac_fn_c_try_compile () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - rm -f conftest.$ac_objext - if { { ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compile") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 -fi - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} # ac_fn_c_try_compile - -# ac_fn_c_try_cpp LINENO -# ---------------------- -# Try to preprocess conftest.$ac_ext, and return whether this succeeded. -ac_fn_c_try_cpp () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - if { { ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } > conftest.i && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 -fi - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} # ac_fn_c_try_cpp - -# ac_fn_c_try_run LINENO -# ---------------------- -# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes -# that executables *can* be run. -ac_fn_c_try_run () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - if { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' - { { case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; }; then : - ac_retval=0 -else - $as_echo "$as_me: program exited with status $ac_status" >&5 - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=$ac_status -fi - rm -rf conftest.dSYM conftest_ipa8_conftest.oo - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} # ac_fn_c_try_run - -# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES -# ------------------------------------------------------- -# Tests whether HEADER exists, giving a warning if it cannot be compiled using -# the include files in INCLUDES and setting the cache variable VAR -# accordingly. -ac_fn_c_check_header_mongrel () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - if eval \${$3+:} false; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -$as_echo_n "checking for $2... " >&6; } -if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -else - # Is the header compilable? -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5 -$as_echo_n "checking $2 usability... " >&6; } -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -#include <$2> -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_header_compiler=yes -else - ac_header_compiler=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5 -$as_echo "$ac_header_compiler" >&6; } - -# Is the header present? -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5 -$as_echo_n "checking $2 presence... " >&6; } -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include <$2> -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - ac_header_preproc=yes -else - ac_header_preproc=no -fi -rm -f conftest.err conftest.i conftest.$ac_ext -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5 -$as_echo "$ac_header_preproc" >&6; } - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #(( - yes:no: ) - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5 -$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} - ;; - no:yes:* ) - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5 -$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5 -$as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5 -$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5 -$as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} - ;; -esac - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -$as_echo_n "checking for $2... " >&6; } -if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 -else - eval "$3=\$ac_header_compiler" -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -fi - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - -} # ac_fn_c_check_header_mongrel - -# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES -# ------------------------------------------------------- -# Tests whether HEADER exists and can be compiled using the include files in -# INCLUDES, setting the cache variable VAR accordingly. -ac_fn_c_check_header_compile () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -$as_echo_n "checking for $2... " >&6; } -if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -#include <$2> -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - eval "$3=yes" -else - eval "$3=no" -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - -} # ac_fn_c_check_header_compile - -# ac_fn_c_try_link LINENO -# ----------------------- -# Try to link conftest.$ac_ext, and return whether this succeeded. -ac_fn_c_try_link () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - rm -f conftest.$ac_objext conftest$ac_exeext - if { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 -fi - # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information - # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would - # interfere with the next link command; also delete a directory that is - # left behind by Apple's compiler. We do this before executing the actions. - rm -rf conftest.dSYM conftest_ipa8_conftest.oo - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} # ac_fn_c_try_link - -# ac_fn_c_check_func LINENO FUNC VAR -# ---------------------------------- -# Tests whether FUNC exists, setting the cache variable VAR accordingly -ac_fn_c_check_func () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -$as_echo_n "checking for $2... " >&6; } -if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -/* Define $2 to an innocuous variant, in case declares $2. - For example, HP-UX 11i declares gettimeofday. */ -#define $2 innocuous_$2 - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $2 (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef $2 - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char $2 (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_$2 || defined __stub___$2 -choke me -#endif - -int -main () -{ -return $2 (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - eval "$3=yes" -else - eval "$3=no" -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - -} # ac_fn_c_check_func -cat >config.log <<_ACEOF -This file contains any messages produced by compilers while -running configure, to aid debugging if configure makes a mistake. - -It was created by libjpeg $as_me 8.4.0, which was -generated by GNU Autoconf 2.68. Invocation command line was - - $ $0 $@ - -_ACEOF -exec 5>>config.log -{ -cat <<_ASUNAME -## --------- ## -## Platform. ## -## --------- ## - -hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` -uname -m = `(uname -m) 2>/dev/null || echo unknown` -uname -r = `(uname -r) 2>/dev/null || echo unknown` -uname -s = `(uname -s) 2>/dev/null || echo unknown` -uname -v = `(uname -v) 2>/dev/null || echo unknown` - -/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` -/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` - -/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` -/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` -/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` -/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` -/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` -/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` -/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` - -_ASUNAME - -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - $as_echo "PATH: $as_dir" - done -IFS=$as_save_IFS - -} >&5 - -cat >&5 <<_ACEOF - - -## ----------- ## -## Core tests. ## -## ----------- ## - -_ACEOF - - -# Keep a trace of the command line. -# Strip out --no-create and --no-recursion so they do not pile up. -# Strip out --silent because we don't want to record it for future runs. -# Also quote any args containing shell meta-characters. -# Make two passes to allow for proper duplicate-argument suppression. -ac_configure_args= -ac_configure_args0= -ac_configure_args1= -ac_must_keep_next=false -for ac_pass in 1 2 -do - for ac_arg - do - case $ac_arg in - -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - continue ;; - *\'*) - ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - case $ac_pass in - 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; - 2) - as_fn_append ac_configure_args1 " '$ac_arg'" - if test $ac_must_keep_next = true; then - ac_must_keep_next=false # Got value, back to normal. - else - case $ac_arg in - *=* | --config-cache | -C | -disable-* | --disable-* \ - | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ - | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ - | -with-* | --with-* | -without-* | --without-* | --x) - case "$ac_configure_args0 " in - "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; - esac - ;; - -* ) ac_must_keep_next=true ;; - esac - fi - as_fn_append ac_configure_args " '$ac_arg'" - ;; - esac - done -done -{ ac_configure_args0=; unset ac_configure_args0;} -{ ac_configure_args1=; unset ac_configure_args1;} - -# When interrupted or exit'd, cleanup temporary files, and complete -# config.log. We remove comments because anyway the quotes in there -# would cause problems or look ugly. -# WARNING: Use '\'' to represent an apostrophe within the trap. -# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. -trap 'exit_status=$? - # Save into config.log some information that might help in debugging. - { - echo - - $as_echo "## ---------------- ## -## Cache variables. ## -## ---------------- ##" - echo - # The following way of writing the cache mishandles newlines in values, -( - for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do - eval ac_val=\$$ac_var - case $ac_val in #( - *${as_nl}*) - case $ac_var in #( - *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 -$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; - esac - case $ac_var in #( - _ | IFS | as_nl) ;; #( - BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( - *) { eval $ac_var=; unset $ac_var;} ;; - esac ;; - esac - done - (set) 2>&1 | - case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( - *${as_nl}ac_space=\ *) - sed -n \ - "s/'\''/'\''\\\\'\'''\''/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" - ;; #( - *) - sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" - ;; - esac | - sort -) - echo - - $as_echo "## ----------------- ## -## Output variables. ## -## ----------------- ##" - echo - for ac_var in $ac_subst_vars - do - eval ac_val=\$$ac_var - case $ac_val in - *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; - esac - $as_echo "$ac_var='\''$ac_val'\''" - done | sort - echo - - if test -n "$ac_subst_files"; then - $as_echo "## ------------------- ## -## File substitutions. ## -## ------------------- ##" - echo - for ac_var in $ac_subst_files - do - eval ac_val=\$$ac_var - case $ac_val in - *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; - esac - $as_echo "$ac_var='\''$ac_val'\''" - done | sort - echo - fi - - if test -s confdefs.h; then - $as_echo "## ----------- ## -## confdefs.h. ## -## ----------- ##" - echo - cat confdefs.h - echo - fi - test "$ac_signal" != 0 && - $as_echo "$as_me: caught signal $ac_signal" - $as_echo "$as_me: exit $exit_status" - } >&5 - rm -f core *.core core.conftest.* && - rm -f -r conftest* confdefs* conf$$* $ac_clean_files && - exit $exit_status -' 0 -for ac_signal in 1 2 13 15; do - trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal -done -ac_signal=0 - -# confdefs.h avoids OS command line length limits that DEFS can exceed. -rm -f -r conftest* confdefs.h - -$as_echo "/* confdefs.h */" > confdefs.h - -# Predefined preprocessor variables. - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_NAME "$PACKAGE_NAME" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_TARNAME "$PACKAGE_TARNAME" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_VERSION "$PACKAGE_VERSION" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_STRING "$PACKAGE_STRING" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_URL "$PACKAGE_URL" -_ACEOF - - -# Let the site file select an alternate cache file if it wants to. -# Prefer an explicitly selected file to automatically selected ones. -ac_site_file1=NONE -ac_site_file2=NONE -if test -n "$CONFIG_SITE"; then - # We do not want a PATH search for config.site. - case $CONFIG_SITE in #(( - -*) ac_site_file1=./$CONFIG_SITE;; - */*) ac_site_file1=$CONFIG_SITE;; - *) ac_site_file1=./$CONFIG_SITE;; - esac -elif test "x$prefix" != xNONE; then - ac_site_file1=$prefix/share/config.site - ac_site_file2=$prefix/etc/config.site -else - ac_site_file1=$ac_default_prefix/share/config.site - ac_site_file2=$ac_default_prefix/etc/config.site -fi -for ac_site_file in "$ac_site_file1" "$ac_site_file2" -do - test "x$ac_site_file" = xNONE && continue - if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 -$as_echo "$as_me: loading site script $ac_site_file" >&6;} - sed 's/^/| /' "$ac_site_file" >&5 - . "$ac_site_file" \ - || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "failed to load site script $ac_site_file -See \`config.log' for more details" "$LINENO" 5; } - fi -done - -if test -r "$cache_file"; then - # Some versions of bash will fail to source /dev/null (special files - # actually), so we avoid doing that. DJGPP emulates it as a regular file. - if test /dev/null != "$cache_file" && test -f "$cache_file"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 -$as_echo "$as_me: loading cache $cache_file" >&6;} - case $cache_file in - [\\/]* | ?:[\\/]* ) . "$cache_file";; - *) . "./$cache_file";; - esac - fi -else - { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 -$as_echo "$as_me: creating cache $cache_file" >&6;} - >$cache_file -fi - -# Check that the precious variables saved in the cache have kept the same -# value. -ac_cache_corrupted=false -for ac_var in $ac_precious_vars; do - eval ac_old_set=\$ac_cv_env_${ac_var}_set - eval ac_new_set=\$ac_env_${ac_var}_set - eval ac_old_val=\$ac_cv_env_${ac_var}_value - eval ac_new_val=\$ac_env_${ac_var}_value - case $ac_old_set,$ac_new_set in - set,) - { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 -$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,set) - { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 -$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,);; - *) - if test "x$ac_old_val" != "x$ac_new_val"; then - # differences in whitespace do not lead to failure. - ac_old_val_w=`echo x $ac_old_val` - ac_new_val_w=`echo x $ac_new_val` - if test "$ac_old_val_w" != "$ac_new_val_w"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 -$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} - ac_cache_corrupted=: - else - { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 -$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} - eval $ac_var=\$ac_old_val - fi - { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 -$as_echo "$as_me: former value: \`$ac_old_val'" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 -$as_echo "$as_me: current value: \`$ac_new_val'" >&2;} - fi;; - esac - # Pass precious variables to config.status. - if test "$ac_new_set" = set; then - case $ac_new_val in - *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; - *) ac_arg=$ac_var=$ac_new_val ;; - esac - case " $ac_configure_args " in - *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. - *) as_fn_append ac_configure_args " '$ac_arg'" ;; - esac - fi -done -if $ac_cache_corrupted; then - { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 -$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} - as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 -fi -## -------------------- ## -## Main body of script. ## -## -------------------- ## - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - - -# Directory where autotools helper scripts lives. -ac_aux_dir= -for ac_dir in . "$srcdir"/.; do - if test -f "$ac_dir/install-sh"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install-sh -c" - break - elif test -f "$ac_dir/install.sh"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install.sh -c" - break - elif test -f "$ac_dir/shtool"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/shtool install -c" - break - fi -done -if test -z "$ac_aux_dir"; then - as_fn_error $? "cannot find install-sh, install.sh, or shtool in . \"$srcdir\"/." "$LINENO" 5 -fi - -# These three variables are undocumented and unsupported, -# and are intended to be withdrawn in a future Autoconf release. -# They can cause serious problems if a builder's source tree is in a directory -# whose full name contains unusual characters. -ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. -ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. -ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. - - - -# Generate configuration headers. -ac_config_headers="$ac_config_headers jconfig.h:jconfig.cfg" - - -# Hack: disable autoheader so that it doesn't overwrite our cfg template. -AUTOHEADER="echo autoheader ignored" - -# Check system type -# Make sure we can run config.sub. -$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || - as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5 - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5 -$as_echo_n "checking build system type... " >&6; } -if ${ac_cv_build+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_build_alias=$build_alias -test "x$ac_build_alias" = x && - ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` -test "x$ac_build_alias" = x && - as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5 -ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || - as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5 - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5 -$as_echo "$ac_cv_build" >&6; } -case $ac_cv_build in -*-*-*) ;; -*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;; -esac -build=$ac_cv_build -ac_save_IFS=$IFS; IFS='-' -set x $ac_cv_build -shift -build_cpu=$1 -build_vendor=$2 -shift; shift -# Remember, the first character of IFS is used to create $*, -# except with old shells: -build_os=$* -IFS=$ac_save_IFS -case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5 -$as_echo_n "checking host system type... " >&6; } -if ${ac_cv_host+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test "x$host_alias" = x; then - ac_cv_host=$ac_cv_build -else - ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || - as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5 -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5 -$as_echo "$ac_cv_host" >&6; } -case $ac_cv_host in -*-*-*) ;; -*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;; -esac -host=$ac_cv_host -ac_save_IFS=$IFS; IFS='-' -set x $ac_cv_host -shift -host_cpu=$1 -host_vendor=$2 -shift; shift -# Remember, the first character of IFS is used to create $*, -# except with old shells: -host_os=$* -IFS=$ac_save_IFS -case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking target system type" >&5 -$as_echo_n "checking target system type... " >&6; } -if ${ac_cv_target+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test "x$target_alias" = x; then - ac_cv_target=$ac_cv_host -else - ac_cv_target=`$SHELL "$ac_aux_dir/config.sub" $target_alias` || - as_fn_error $? "$SHELL $ac_aux_dir/config.sub $target_alias failed" "$LINENO" 5 -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_target" >&5 -$as_echo "$ac_cv_target" >&6; } -case $ac_cv_target in -*-*-*) ;; -*) as_fn_error $? "invalid value of canonical target" "$LINENO" 5;; -esac -target=$ac_cv_target -ac_save_IFS=$IFS; IFS='-' -set x $ac_cv_target -shift -target_cpu=$1 -target_vendor=$2 -shift; shift -# Remember, the first character of IFS is used to create $*, -# except with old shells: -target_os=$* -IFS=$ac_save_IFS -case $target_os in *\ *) target_os=`echo "$target_os" | sed 's/ /-/g'`;; esac - - -# The aliases save the names the user supplied, while $host etc. -# will get canonicalized. -test -n "$target_alias" && - test "$program_prefix$program_suffix$program_transform_name" = \ - NONENONEs,x,x, && - program_prefix=${target_alias}- - -# Initialize Automake -# Don't require all the GNU mandated files -am__api_version='1.11' - -# Find a good install program. We prefer a C program (faster), -# so one script is as good as another. But avoid the broken or -# incompatible versions: -# SysV /etc/install, /usr/sbin/install -# SunOS /usr/etc/install -# IRIX /sbin/install -# AIX /bin/install -# AmigaOS /C/install, which installs bootblocks on floppy discs -# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag -# AFS /usr/afsws/bin/install, which mishandles nonexistent args -# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" -# OS/2's system install, which has a completely different semantic -# ./install, which can be erroneously created by make from ./install.sh. -# Reject install programs that cannot install multiple files. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 -$as_echo_n "checking for a BSD-compatible install... " >&6; } -if test -z "$INSTALL"; then -if ${ac_cv_path_install+:} false; then : - $as_echo_n "(cached) " >&6 -else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - # Account for people who put trailing slashes in PATH elements. -case $as_dir/ in #(( - ./ | .// | /[cC]/* | \ - /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ - ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ - /usr/ucb/* ) ;; - *) - # OSF1 and SCO ODT 3.0 have their own names for install. - # Don't use installbsd from OSF since it installs stuff as root - # by default. - for ac_prog in ginstall scoinst install; do - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then - if test $ac_prog = install && - grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # AIX install. It has an incompatible calling convention. - : - elif test $ac_prog = install && - grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # program-specific install script used by HP pwplus--don't use. - : - else - rm -rf conftest.one conftest.two conftest.dir - echo one > conftest.one - echo two > conftest.two - mkdir conftest.dir - if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && - test -s conftest.one && test -s conftest.two && - test -s conftest.dir/conftest.one && - test -s conftest.dir/conftest.two - then - ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" - break 3 - fi - fi - fi - done - done - ;; -esac - - done -IFS=$as_save_IFS - -rm -rf conftest.one conftest.two conftest.dir - -fi - if test "${ac_cv_path_install+set}" = set; then - INSTALL=$ac_cv_path_install - else - # As a last resort, use the slow shell script. Don't cache a - # value for INSTALL within a source directory, because that will - # break other packages using the cache if that directory is - # removed, or if the value is a relative name. - INSTALL=$ac_install_sh - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 -$as_echo "$INSTALL" >&6; } - -# Use test -z because SunOS4 sh mishandles braces in ${var-val}. -# It thinks the first close brace ends the variable substitution. -test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' - -test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' - -test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5 -$as_echo_n "checking whether build environment is sane... " >&6; } -# Just in case -sleep 1 -echo timestamp > conftest.file -# Reject unsafe characters in $srcdir or the absolute working directory -# name. Accept space and tab only in the latter. -am_lf=' -' -case `pwd` in - *[\\\"\#\$\&\'\`$am_lf]*) - as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;; -esac -case $srcdir in - *[\\\"\#\$\&\'\`$am_lf\ \ ]*) - as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;; -esac - -# Do `set' in a subshell so we don't clobber the current shell's -# arguments. Must try -L first in case configure is actually a -# symlink; some systems play weird games with the mod time of symlinks -# (eg FreeBSD returns the mod time of the symlink's containing -# directory). -if ( - set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` - if test "$*" = "X"; then - # -L didn't work. - set X `ls -t "$srcdir/configure" conftest.file` - fi - rm -f conftest.file - if test "$*" != "X $srcdir/configure conftest.file" \ - && test "$*" != "X conftest.file $srcdir/configure"; then - - # If neither matched, then we have a broken ls. This can happen - # if, for instance, CONFIG_SHELL is bash and it inherits a - # broken ls alias from the environment. This has actually - # happened. Such a system could not be considered "sane". - as_fn_error $? "ls -t appears to fail. Make sure there is not a broken -alias in your environment" "$LINENO" 5 - fi - - test "$2" = conftest.file - ) -then - # Ok. - : -else - as_fn_error $? "newly created file is older than distributed files! -Check your system clock" "$LINENO" 5 -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } -test "$program_prefix" != NONE && - program_transform_name="s&^&$program_prefix&;$program_transform_name" -# Use a double $ so make ignores it. -test "$program_suffix" != NONE && - program_transform_name="s&\$&$program_suffix&;$program_transform_name" -# Double any \ or $. -# By default was `s,x,x', remove it if useless. -ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' -program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` - -# expand $ac_aux_dir to an absolute path -am_aux_dir=`cd $ac_aux_dir && pwd` - -if test x"${MISSING+set}" != xset; then - case $am_aux_dir in - *\ * | *\ *) - MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; - *) - MISSING="\${SHELL} $am_aux_dir/missing" ;; - esac -fi -# Use eval to expand $SHELL -if eval "$MISSING --run true"; then - am_missing_run="$MISSING --run " -else - am_missing_run= - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5 -$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} -fi - -if test x"${install_sh}" != xset; then - case $am_aux_dir in - *\ * | *\ *) - install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; - *) - install_sh="\${SHELL} $am_aux_dir/install-sh" - esac -fi - -# Installed binaries are usually stripped using `strip' when the user -# run `make install-strip'. However `strip' might not be the right -# tool to use in cross-compilation environments, therefore Automake -# will honor the `STRIP' environment variable to overrule this program. -if test "$cross_compiling" != no; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. -set dummy ${ac_tool_prefix}strip; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_STRIP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$STRIP"; then - ac_cv_prog_STRIP="$STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_STRIP="${ac_tool_prefix}strip" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -STRIP=$ac_cv_prog_STRIP -if test -n "$STRIP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 -$as_echo "$STRIP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_STRIP"; then - ac_ct_STRIP=$STRIP - # Extract the first word of "strip", so it can be a program name with args. -set dummy strip; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_STRIP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_STRIP"; then - ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_STRIP="strip" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP -if test -n "$ac_ct_STRIP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 -$as_echo "$ac_ct_STRIP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_STRIP" = x; then - STRIP=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - STRIP=$ac_ct_STRIP - fi -else - STRIP="$ac_cv_prog_STRIP" -fi - -fi -INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5 -$as_echo_n "checking for a thread-safe mkdir -p... " >&6; } -if test -z "$MKDIR_P"; then - if ${ac_cv_path_mkdir+:} false; then : - $as_echo_n "(cached) " >&6 -else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in mkdir gmkdir; do - for ac_exec_ext in '' $ac_executable_extensions; do - { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue - case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( - 'mkdir (GNU coreutils) '* | \ - 'mkdir (coreutils) '* | \ - 'mkdir (fileutils) '4.1*) - ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext - break 3;; - esac - done - done - done -IFS=$as_save_IFS - -fi - - test -d ./--version && rmdir ./--version - if test "${ac_cv_path_mkdir+set}" = set; then - MKDIR_P="$ac_cv_path_mkdir -p" - else - # As a last resort, use the slow shell script. Don't cache a - # value for MKDIR_P within a source directory, because that will - # break other packages using the cache if that directory is - # removed, or if the value is a relative name. - MKDIR_P="$ac_install_sh -d" - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5 -$as_echo "$MKDIR_P" >&6; } - -mkdir_p="$MKDIR_P" -case $mkdir_p in - [\\/$]* | ?:[\\/]*) ;; - */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; -esac - -for ac_prog in gawk mawk nawk awk -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_AWK+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$AWK"; then - ac_cv_prog_AWK="$AWK" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_AWK="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -AWK=$ac_cv_prog_AWK -if test -n "$AWK"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 -$as_echo "$AWK" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$AWK" && break -done - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 -$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } -set x ${MAKE-make} -ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` -if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat >conftest.make <<\_ACEOF -SHELL = /bin/sh -all: - @echo '@@@%%%=$(MAKE)=@@@%%%' -_ACEOF -# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. -case `${MAKE-make} -f conftest.make 2>/dev/null` in - *@@@%%%=?*=@@@%%%*) - eval ac_cv_prog_make_${ac_make}_set=yes;; - *) - eval ac_cv_prog_make_${ac_make}_set=no;; -esac -rm -f conftest.make -fi -if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - SET_MAKE= -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - SET_MAKE="MAKE=${MAKE-make}" -fi - -rm -rf .tst 2>/dev/null -mkdir .tst 2>/dev/null -if test -d .tst; then - am__leading_dot=. -else - am__leading_dot=_ -fi -rmdir .tst 2>/dev/null - -if test "`cd $srcdir && pwd`" != "`pwd`"; then - # Use -I$(srcdir) only when $(srcdir) != ., so that make's output - # is not polluted with repeated "-I." - am__isrc=' -I$(srcdir)' - # test to see if srcdir already configured - if test -f $srcdir/config.status; then - as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 - fi -fi - -# test whether we have cygpath -if test -z "$CYGPATH_W"; then - if (cygpath --version) >/dev/null 2>/dev/null; then - CYGPATH_W='cygpath -w' - else - CYGPATH_W=echo - fi -fi - - -# Define the identity of the package. - PACKAGE='libjpeg' - VERSION='8.4.0' - - -cat >>confdefs.h <<_ACEOF -#define PACKAGE "$PACKAGE" -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define VERSION "$VERSION" -_ACEOF - -# Some tools Automake needs. - -ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} - - -AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} - - -AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} - - -AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} - - -MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} - -# We need awk for the "check" target. The system "awk" is bad on -# some platforms. -# Always define AMTAR for backward compatibility. - -AMTAR=${AMTAR-"${am_missing_run}tar"} - -am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -' - - - - - - -# Make --enable-silent-rules the default. -# To get verbose build output you may configure -# with --disable-silent-rules or use "make V=1". -# Check whether --enable-silent-rules was given. -if test "${enable_silent_rules+set}" = set; then : - enableval=$enable_silent_rules; -fi - -case $enable_silent_rules in -yes) AM_DEFAULT_VERBOSITY=0;; -no) AM_DEFAULT_VERBOSITY=1;; -*) AM_DEFAULT_VERBOSITY=0;; -esac -AM_BACKSLASH='\' - - -# This is required when using the de-ANSI-fication feature. -DEPDIR="${am__leading_dot}deps" - -ac_config_commands="$ac_config_commands depfiles" - - -am_make=${MAKE-make} -cat > confinc << 'END' -am__doit: - @echo this is the am__doit target -.PHONY: am__doit -END -# If we don't find an include directive, just comment out the code. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5 -$as_echo_n "checking for style of include used by $am_make... " >&6; } -am__include="#" -am__quote= -_am_result=none -# First try GNU make style include. -echo "include confinc" > confmf -# Ignore all kinds of additional output from `make'. -case `$am_make -s -f confmf 2> /dev/null` in #( -*the\ am__doit\ target*) - am__include=include - am__quote= - _am_result=GNU - ;; -esac -# Now try BSD make style include. -if test "$am__include" = "#"; then - echo '.include "confinc"' > confmf - case `$am_make -s -f confmf 2> /dev/null` in #( - *the\ am__doit\ target*) - am__include=.include - am__quote="\"" - _am_result=BSD - ;; - esac -fi - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5 -$as_echo "$_am_result" >&6; } -rm -f confinc confmf - -# Check whether --enable-dependency-tracking was given. -if test "${enable_dependency_tracking+set}" = set; then : - enableval=$enable_dependency_tracking; -fi - -if test "x$enable_dependency_tracking" != xno; then - am_depcomp="$ac_aux_dir/depcomp" - AMDEPBACKSLASH='\' - am__nodep='_no' -fi - if test "x$enable_dependency_tracking" != xno; then - AMDEP_TRUE= - AMDEP_FALSE='#' -else - AMDEP_TRUE='#' - AMDEP_FALSE= -fi - - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. -set dummy ${ac_tool_prefix}gcc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_CC="${ac_tool_prefix}gcc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_CC"; then - ac_ct_CC=$CC - # Extract the first word of "gcc", so it can be a program name with args. -set dummy gcc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_CC="gcc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 -$as_echo "$ac_ct_CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_CC" = x; then - CC="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - CC=$ac_ct_CC - fi -else - CC="$ac_cv_prog_CC" -fi - -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. -set dummy ${ac_tool_prefix}cc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_CC="${ac_tool_prefix}cc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - fi -fi -if test -z "$CC"; then - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - ac_prog_rejected=no -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then - ac_prog_rejected=yes - continue - fi - ac_cv_prog_CC="cc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -if test $ac_prog_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. - set dummy $ac_cv_prog_CC - shift - if test $# != 0; then - # We chose a different compiler from the bogus one. - # However, it has the same basename, so the bogon will be chosen - # first if we set CC to just the basename; use the full file name. - shift - ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" - fi -fi -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - for ac_prog in cl.exe - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_CC="$ac_tool_prefix$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$CC" && break - done -fi -if test -z "$CC"; then - ac_ct_CC=$CC - for ac_prog in cl.exe -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_CC="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 -$as_echo "$ac_ct_CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$ac_ct_CC" && break -done - - if test "x$ac_ct_CC" = x; then - CC="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - CC=$ac_ct_CC - fi -fi - -fi - - -test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "no acceptable C compiler found in \$PATH -See \`config.log' for more details" "$LINENO" 5; } - -# Provide some information about the compiler. -$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 -set X $ac_compile -ac_compiler=$2 -for ac_option in --version -v -V -qversion; do - { { ac_try="$ac_compiler $ac_option >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compiler $ac_option >&5") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - sed '10a\ -... rest of stderr output deleted ... - 10q' conftest.err >conftest.er1 - cat conftest.er1 >&5 - fi - rm -f conftest.er1 conftest.err - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } -done - -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" -# Try to create an executable without -o first, disregard a.out. -# It will help us diagnose broken compilers, and finding out an intuition -# of exeext. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 -$as_echo_n "checking whether the C compiler works... " >&6; } -ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` - -# The possible output files: -ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" - -ac_rmfiles= -for ac_file in $ac_files -do - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; - * ) ac_rmfiles="$ac_rmfiles $ac_file";; - esac -done -rm -f $ac_rmfiles - -if { { ac_try="$ac_link_default" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link_default") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : - # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. -# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' -# in a Makefile. We should not override ac_cv_exeext if it was cached, -# so that the user can short-circuit this test for compilers unknown to -# Autoconf. -for ac_file in $ac_files '' -do - test -f "$ac_file" || continue - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) - ;; - [ab].out ) - # We found the default executable, but exeext='' is most - # certainly right. - break;; - *.* ) - if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; - then :; else - ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - fi - # We set ac_cv_exeext here because the later test for it is not - # safe: cross compilers may not add the suffix if given an `-o' - # argument, so we may need to know it at that point already. - # Even if this section looks crufty: it has the advantage of - # actually working. - break;; - * ) - break;; - esac -done -test "$ac_cv_exeext" = no && ac_cv_exeext= - -else - ac_file='' -fi -if test -z "$ac_file"; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error 77 "C compiler cannot create executables -See \`config.log' for more details" "$LINENO" 5; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 -$as_echo_n "checking for C compiler default output file name... " >&6; } -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 -$as_echo "$ac_file" >&6; } -ac_exeext=$ac_cv_exeext - -rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out -ac_clean_files=$ac_clean_files_save -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 -$as_echo_n "checking for suffix of executables... " >&6; } -if { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : - # If both `conftest.exe' and `conftest' are `present' (well, observable) -# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will -# work properly (i.e., refer to `conftest.exe'), while it won't with -# `rm'. -for ac_file in conftest.exe conftest conftest.*; do - test -f "$ac_file" || continue - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; - *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - break;; - * ) break;; - esac -done -else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot compute suffix of executables: cannot compile and link -See \`config.log' for more details" "$LINENO" 5; } -fi -rm -f conftest conftest$ac_cv_exeext -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 -$as_echo "$ac_cv_exeext" >&6; } - -rm -f conftest.$ac_ext -EXEEXT=$ac_cv_exeext -ac_exeext=$EXEEXT -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -int -main () -{ -FILE *f = fopen ("conftest.out", "w"); - return ferror (f) || fclose (f) != 0; - - ; - return 0; -} -_ACEOF -ac_clean_files="$ac_clean_files conftest.out" -# Check that the compiler produces executables we can run. If not, either -# the compiler is broken, or we cross compile. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 -$as_echo_n "checking whether we are cross compiling... " >&6; } -if test "$cross_compiling" != yes; then - { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - if { ac_try='./conftest$ac_cv_exeext' - { { case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; }; then - cross_compiling=no - else - if test "$cross_compiling" = maybe; then - cross_compiling=yes - else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot run C compiled programs. -If you meant to cross compile, use \`--host'. -See \`config.log' for more details" "$LINENO" 5; } - fi - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 -$as_echo "$cross_compiling" >&6; } - -rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out -ac_clean_files=$ac_clean_files_save -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 -$as_echo_n "checking for suffix of object files... " >&6; } -if ${ac_cv_objext+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.o conftest.obj -if { { ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compile") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : - for ac_file in conftest.o conftest.obj conftest.*; do - test -f "$ac_file" || continue; - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; - *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` - break;; - esac -done -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot compute suffix of object files: cannot compile -See \`config.log' for more details" "$LINENO" 5; } -fi -rm -f conftest.$ac_cv_objext conftest.$ac_ext -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 -$as_echo "$ac_cv_objext" >&6; } -OBJEXT=$ac_cv_objext -ac_objext=$OBJEXT -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 -$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } -if ${ac_cv_c_compiler_gnu+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ -#ifndef __GNUC__ - choke me -#endif - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_compiler_gnu=yes -else - ac_compiler_gnu=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -ac_cv_c_compiler_gnu=$ac_compiler_gnu - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 -$as_echo "$ac_cv_c_compiler_gnu" >&6; } -if test $ac_compiler_gnu = yes; then - GCC=yes -else - GCC= -fi -ac_test_CFLAGS=${CFLAGS+set} -ac_save_CFLAGS=$CFLAGS -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 -$as_echo_n "checking whether $CC accepts -g... " >&6; } -if ${ac_cv_prog_cc_g+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_save_c_werror_flag=$ac_c_werror_flag - ac_c_werror_flag=yes - ac_cv_prog_cc_g=no - CFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_g=yes -else - CFLAGS="" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - -else - ac_c_werror_flag=$ac_save_c_werror_flag - CFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_g=yes -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - ac_c_werror_flag=$ac_save_c_werror_flag -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 -$as_echo "$ac_cv_prog_cc_g" >&6; } -if test "$ac_test_CFLAGS" = set; then - CFLAGS=$ac_save_CFLAGS -elif test $ac_cv_prog_cc_g = yes; then - if test "$GCC" = yes; then - CFLAGS="-g -O2" - else - CFLAGS="-g" - fi -else - if test "$GCC" = yes; then - CFLAGS="-O2" - else - CFLAGS= - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 -$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } -if ${ac_cv_prog_cc_c89+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_cv_prog_cc_c89=no -ac_save_CC=$CC -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -#include -#include -/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ -struct buf { int x; }; -FILE * (*rcsopen) (struct buf *, struct stat *, int); -static char *e (p, i) - char **p; - int i; -{ - return p[i]; -} -static char *f (char * (*g) (char **, int), char **p, ...) -{ - char *s; - va_list v; - va_start (v,p); - s = g (p, va_arg (v,int)); - va_end (v); - return s; -} - -/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has - function prototypes and stuff, but not '\xHH' hex character constants. - These don't provoke an error unfortunately, instead are silently treated - as 'x'. The following induces an error, until -std is added to get - proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an - array size at least. It's necessary to write '\x00'==0 to get something - that's true only with -std. */ -int osf4_cc_array ['\x00' == 0 ? 1 : -1]; - -/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters - inside strings and character constants. */ -#define FOO(x) 'x' -int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; - -int test (int i, double x); -struct s1 {int (*f) (int a);}; -struct s2 {int (*f) (double a);}; -int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); -int argc; -char **argv; -int -main () -{ -return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; - ; - return 0; -} -_ACEOF -for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ - -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" -do - CC="$ac_save_CC $ac_arg" - if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_c89=$ac_arg -fi -rm -f core conftest.err conftest.$ac_objext - test "x$ac_cv_prog_cc_c89" != "xno" && break -done -rm -f conftest.$ac_ext -CC=$ac_save_CC - -fi -# AC_CACHE_VAL -case "x$ac_cv_prog_cc_c89" in - x) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 -$as_echo "none needed" >&6; } ;; - xno) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 -$as_echo "unsupported" >&6; } ;; - *) - CC="$CC $ac_cv_prog_cc_c89" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 -$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; -esac -if test "x$ac_cv_prog_cc_c89" != xno; then : - -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -depcc="$CC" am_compiler_list= - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 -$as_echo_n "checking dependency style of $depcc... " >&6; } -if ${am_cv_CC_dependencies_compiler_type+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then - # We make a subdir and do the tests there. Otherwise we can end up - # making bogus files that we don't know about and never remove. For - # instance it was reported that on HP-UX the gcc test will end up - # making a dummy file named `D' -- because `-MD' means `put the output - # in D'. - rm -rf conftest.dir - mkdir conftest.dir - # Copy depcomp to subdir because otherwise we won't find it if we're - # using a relative directory. - cp "$am_depcomp" conftest.dir - cd conftest.dir - # We will build objects and dependencies in a subdirectory because - # it helps to detect inapplicable dependency modes. For instance - # both Tru64's cc and ICC support -MD to output dependencies as a - # side effect of compilation, but ICC will put the dependencies in - # the current directory while Tru64 will put them in the object - # directory. - mkdir sub - - am_cv_CC_dependencies_compiler_type=none - if test "$am_compiler_list" = ""; then - am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` - fi - am__universal=false - case " $depcc " in #( - *\ -arch\ *\ -arch\ *) am__universal=true ;; - esac - - for depmode in $am_compiler_list; do - # Setup a source with many dependencies, because some compilers - # like to wrap large dependency lists on column 80 (with \), and - # we should not choose a depcomp mode which is confused by this. - # - # We need to recreate these files for each test, as the compiler may - # overwrite some of them when testing with obscure command lines. - # This happens at least with the AIX C compiler. - : > sub/conftest.c - for i in 1 2 3 4 5 6; do - echo '#include "conftst'$i'.h"' >> sub/conftest.c - # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with - # Solaris 8's {/usr,}/bin/sh. - touch sub/conftst$i.h - done - echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf - - # We check with `-c' and `-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle `-M -o', and we need to detect this. Also, some Intel - # versions had trouble with output in subdirs - am__obj=sub/conftest.${OBJEXT-o} - am__minus_obj="-o $am__obj" - case $depmode in - gcc) - # This depmode causes a compiler race in universal mode. - test "$am__universal" = false || continue - ;; - nosideeffect) - # after this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested - if test "x$enable_dependency_tracking" = xyes; then - continue - else - break - fi - ;; - msvc7 | msvc7msys | msvisualcpp | msvcmsys) - # This compiler won't grok `-c -o', but also, the minuso test has - # not run yet. These depmodes are late enough in the game, and - # so weak that their functioning should not be impacted. - am__obj=conftest.${OBJEXT-o} - am__minus_obj= - ;; - none) break ;; - esac - if depmode=$depmode \ - source=sub/conftest.c object=$am__obj \ - depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ - $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ - >/dev/null 2>conftest.err && - grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && - grep $am__obj sub/conftest.Po > /dev/null 2>&1 && - ${MAKE-make} -s -f confmf > /dev/null 2>&1; then - # icc doesn't choke on unknown options, it will just issue warnings - # or remarks (even with -Werror). So we grep stderr for any message - # that says an option was ignored or not supported. - # When given -MP, icc 7.0 and 7.1 complain thusly: - # icc: Command line warning: ignoring option '-M'; no argument required - # The diagnosis changed in icc 8.0: - # icc: Command line remark: option '-MP' not supported - if (grep 'ignoring option' conftest.err || - grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else - am_cv_CC_dependencies_compiler_type=$depmode - break - fi - fi - done - - cd .. - rm -rf conftest.dir -else - am_cv_CC_dependencies_compiler_type=none -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 -$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } -CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type - - if - test "x$enable_dependency_tracking" != xno \ - && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then - am__fastdepCC_TRUE= - am__fastdepCC_FALSE='#' -else - am__fastdepCC_TRUE='#' - am__fastdepCC_FALSE= -fi - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for function prototypes" >&5 -$as_echo_n "checking for function prototypes... " >&6; } -if test "$ac_cv_prog_cc_c89" != no; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - -$as_echo "#define PROTOTYPES 1" >>confdefs.h - - -$as_echo "#define __PROTOTYPES 1" >>confdefs.h - -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 -$as_echo_n "checking how to run the C preprocessor... " >&6; } -# On Suns, sometimes $CPP names a directory. -if test -n "$CPP" && test -d "$CPP"; then - CPP= -fi -if test -z "$CPP"; then - if ${ac_cv_prog_CPP+:} false; then : - $as_echo_n "(cached) " >&6 -else - # Double quotes because CPP needs to be expanded - for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" - do - ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - -else - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.i conftest.$ac_ext - - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - # Broken: success on invalid input. -continue -else - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.i conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.i conftest.err conftest.$ac_ext -if $ac_preproc_ok; then : - break -fi - - done - ac_cv_prog_CPP=$CPP - -fi - CPP=$ac_cv_prog_CPP -else - ac_cv_prog_CPP=$CPP -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 -$as_echo "$CPP" >&6; } -ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - -else - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.i conftest.$ac_ext - - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - # Broken: success on invalid input. -continue -else - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.i conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.i conftest.err conftest.$ac_ext -if $ac_preproc_ok; then : - -else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "C preprocessor \"$CPP\" fails sanity check -See \`config.log' for more details" "$LINENO" 5; } -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 -$as_echo_n "checking for grep that handles long lines and -e... " >&6; } -if ${ac_cv_path_GREP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -z "$GREP"; then - ac_path_GREP_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in grep ggrep; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" - { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue -# Check for GNU ac_path_GREP and select it if it is found. - # Check for GNU $ac_path_GREP -case `"$ac_path_GREP" --version 2>&1` in -*GNU*) - ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; -*) - ac_count=0 - $as_echo_n 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - $as_echo 'GREP' >> "conftest.nl" - "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val - if test $ac_count -gt ${ac_path_GREP_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_GREP="$ac_path_GREP" - ac_path_GREP_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - $ac_path_GREP_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_GREP"; then - as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 - fi -else - ac_cv_path_GREP=$GREP -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5 -$as_echo "$ac_cv_path_GREP" >&6; } - GREP="$ac_cv_path_GREP" - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5 -$as_echo_n "checking for egrep... " >&6; } -if ${ac_cv_path_EGREP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 - then ac_cv_path_EGREP="$GREP -E" - else - if test -z "$EGREP"; then - ac_path_EGREP_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in egrep; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" - { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue -# Check for GNU ac_path_EGREP and select it if it is found. - # Check for GNU $ac_path_EGREP -case `"$ac_path_EGREP" --version 2>&1` in -*GNU*) - ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; -*) - ac_count=0 - $as_echo_n 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - $as_echo 'EGREP' >> "conftest.nl" - "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val - if test $ac_count -gt ${ac_path_EGREP_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_EGREP="$ac_path_EGREP" - ac_path_EGREP_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - $ac_path_EGREP_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_EGREP"; then - as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 - fi -else - ac_cv_path_EGREP=$EGREP -fi - - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5 -$as_echo "$ac_cv_path_EGREP" >&6; } - EGREP="$ac_cv_path_EGREP" - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 -$as_echo_n "checking for ANSI C header files... " >&6; } -if ${ac_cv_header_stdc+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -#include -#include - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_header_stdc=yes -else - ac_cv_header_stdc=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - -if test $ac_cv_header_stdc = yes; then - # SunOS 4.x string.h does not declare mem*, contrary to ANSI. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "memchr" >/dev/null 2>&1; then : - -else - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "free" >/dev/null 2>&1; then : - -else - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. - if test "$cross_compiling" = yes; then : - : -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -#if ((' ' & 0x0FF) == 0x020) -# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') -# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) -#else -# define ISLOWER(c) \ - (('a' <= (c) && (c) <= 'i') \ - || ('j' <= (c) && (c) <= 'r') \ - || ('s' <= (c) && (c) <= 'z')) -# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) -#endif - -#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) -int -main () -{ - int i; - for (i = 0; i < 256; i++) - if (XOR (islower (i), ISLOWER (i)) - || toupper (i) != TOUPPER (i)) - return 2; - return 0; -} -_ACEOF -if ac_fn_c_try_run "$LINENO"; then : - -else - ac_cv_header_stdc=no -fi -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ - conftest.$ac_objext conftest.beam conftest.$ac_ext -fi - -fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 -$as_echo "$ac_cv_header_stdc" >&6; } -if test $ac_cv_header_stdc = yes; then - -$as_echo "#define STDC_HEADERS 1" >>confdefs.h - -fi - -# On IRIX 5.3, sys/types and inttypes.h are conflicting. -for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ - inttypes.h stdint.h unistd.h -do : - as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default -" -if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - - - - -if test "$ac_cv_prog_cc_stdc" != no; then - U= ANSI2KNR= -else - U=_ ANSI2KNR=./ansi2knr -fi -# Ensure some checks needed by ansi2knr itself. - -for ac_header in string.h -do : - ac_fn_c_check_header_mongrel "$LINENO" "string.h" "ac_cv_header_string_h" "$ac_includes_default" -if test "x$ac_cv_header_string_h" = xyes; then : - cat >>confdefs.h <<_ACEOF -#define HAVE_STRING_H 1 -_ACEOF - -fi - -done - - - -# Add configure option --enable-maintainer-mode which enables -# dependency checking and generation useful to package maintainers. -# This is made an option to avoid confusing end users. - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable maintainer-specific portions of Makefiles" >&5 -$as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; } - # Check whether --enable-maintainer-mode was given. -if test "${enable_maintainer_mode+set}" = set; then : - enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval -else - USE_MAINTAINER_MODE=no -fi - - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_MAINTAINER_MODE" >&5 -$as_echo "$USE_MAINTAINER_MODE" >&6; } - if test $USE_MAINTAINER_MODE = yes; then - MAINTAINER_MODE_TRUE= - MAINTAINER_MODE_FALSE='#' -else - MAINTAINER_MODE_TRUE='#' - MAINTAINER_MODE_FALSE= -fi - - MAINT=$MAINTAINER_MODE_TRUE - - - -# Check for programs -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. -set dummy ${ac_tool_prefix}gcc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_CC="${ac_tool_prefix}gcc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_CC"; then - ac_ct_CC=$CC - # Extract the first word of "gcc", so it can be a program name with args. -set dummy gcc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_CC="gcc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 -$as_echo "$ac_ct_CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_CC" = x; then - CC="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - CC=$ac_ct_CC - fi -else - CC="$ac_cv_prog_CC" -fi - -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. -set dummy ${ac_tool_prefix}cc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_CC="${ac_tool_prefix}cc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - fi -fi -if test -z "$CC"; then - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - ac_prog_rejected=no -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then - ac_prog_rejected=yes - continue - fi - ac_cv_prog_CC="cc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -if test $ac_prog_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. - set dummy $ac_cv_prog_CC - shift - if test $# != 0; then - # We chose a different compiler from the bogus one. - # However, it has the same basename, so the bogon will be chosen - # first if we set CC to just the basename; use the full file name. - shift - ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" - fi -fi -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - for ac_prog in cl.exe - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_CC="$ac_tool_prefix$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$CC" && break - done -fi -if test -z "$CC"; then - ac_ct_CC=$CC - for ac_prog in cl.exe -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_CC="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 -$as_echo "$ac_ct_CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$ac_ct_CC" && break -done - - if test "x$ac_ct_CC" = x; then - CC="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - CC=$ac_ct_CC - fi -fi - -fi - - -test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "no acceptable C compiler found in \$PATH -See \`config.log' for more details" "$LINENO" 5; } - -# Provide some information about the compiler. -$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 -set X $ac_compile -ac_compiler=$2 -for ac_option in --version -v -V -qversion; do - { { ac_try="$ac_compiler $ac_option >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compiler $ac_option >&5") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - sed '10a\ -... rest of stderr output deleted ... - 10q' conftest.err >conftest.er1 - cat conftest.er1 >&5 - fi - rm -f conftest.er1 conftest.err - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } -done - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 -$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } -if ${ac_cv_c_compiler_gnu+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ -#ifndef __GNUC__ - choke me -#endif - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_compiler_gnu=yes -else - ac_compiler_gnu=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -ac_cv_c_compiler_gnu=$ac_compiler_gnu - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 -$as_echo "$ac_cv_c_compiler_gnu" >&6; } -if test $ac_compiler_gnu = yes; then - GCC=yes -else - GCC= -fi -ac_test_CFLAGS=${CFLAGS+set} -ac_save_CFLAGS=$CFLAGS -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 -$as_echo_n "checking whether $CC accepts -g... " >&6; } -if ${ac_cv_prog_cc_g+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_save_c_werror_flag=$ac_c_werror_flag - ac_c_werror_flag=yes - ac_cv_prog_cc_g=no - CFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_g=yes -else - CFLAGS="" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - -else - ac_c_werror_flag=$ac_save_c_werror_flag - CFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_g=yes -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - ac_c_werror_flag=$ac_save_c_werror_flag -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 -$as_echo "$ac_cv_prog_cc_g" >&6; } -if test "$ac_test_CFLAGS" = set; then - CFLAGS=$ac_save_CFLAGS -elif test $ac_cv_prog_cc_g = yes; then - if test "$GCC" = yes; then - CFLAGS="-g -O2" - else - CFLAGS="-g" - fi -else - if test "$GCC" = yes; then - CFLAGS="-O2" - else - CFLAGS= - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 -$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } -if ${ac_cv_prog_cc_c89+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_cv_prog_cc_c89=no -ac_save_CC=$CC -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -#include -#include -/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ -struct buf { int x; }; -FILE * (*rcsopen) (struct buf *, struct stat *, int); -static char *e (p, i) - char **p; - int i; -{ - return p[i]; -} -static char *f (char * (*g) (char **, int), char **p, ...) -{ - char *s; - va_list v; - va_start (v,p); - s = g (p, va_arg (v,int)); - va_end (v); - return s; -} - -/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has - function prototypes and stuff, but not '\xHH' hex character constants. - These don't provoke an error unfortunately, instead are silently treated - as 'x'. The following induces an error, until -std is added to get - proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an - array size at least. It's necessary to write '\x00'==0 to get something - that's true only with -std. */ -int osf4_cc_array ['\x00' == 0 ? 1 : -1]; - -/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters - inside strings and character constants. */ -#define FOO(x) 'x' -int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; - -int test (int i, double x); -struct s1 {int (*f) (int a);}; -struct s2 {int (*f) (double a);}; -int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); -int argc; -char **argv; -int -main () -{ -return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; - ; - return 0; -} -_ACEOF -for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ - -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" -do - CC="$ac_save_CC $ac_arg" - if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_c89=$ac_arg -fi -rm -f core conftest.err conftest.$ac_objext - test "x$ac_cv_prog_cc_c89" != "xno" && break -done -rm -f conftest.$ac_ext -CC=$ac_save_CC - -fi -# AC_CACHE_VAL -case "x$ac_cv_prog_cc_c89" in - x) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 -$as_echo "none needed" >&6; } ;; - xno) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 -$as_echo "unsupported" >&6; } ;; - *) - CC="$CC $ac_cv_prog_cc_c89" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 -$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; -esac -if test "x$ac_cv_prog_cc_c89" != xno; then : - -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -depcc="$CC" am_compiler_list= - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 -$as_echo_n "checking dependency style of $depcc... " >&6; } -if ${am_cv_CC_dependencies_compiler_type+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then - # We make a subdir and do the tests there. Otherwise we can end up - # making bogus files that we don't know about and never remove. For - # instance it was reported that on HP-UX the gcc test will end up - # making a dummy file named `D' -- because `-MD' means `put the output - # in D'. - rm -rf conftest.dir - mkdir conftest.dir - # Copy depcomp to subdir because otherwise we won't find it if we're - # using a relative directory. - cp "$am_depcomp" conftest.dir - cd conftest.dir - # We will build objects and dependencies in a subdirectory because - # it helps to detect inapplicable dependency modes. For instance - # both Tru64's cc and ICC support -MD to output dependencies as a - # side effect of compilation, but ICC will put the dependencies in - # the current directory while Tru64 will put them in the object - # directory. - mkdir sub - - am_cv_CC_dependencies_compiler_type=none - if test "$am_compiler_list" = ""; then - am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` - fi - am__universal=false - case " $depcc " in #( - *\ -arch\ *\ -arch\ *) am__universal=true ;; - esac - - for depmode in $am_compiler_list; do - # Setup a source with many dependencies, because some compilers - # like to wrap large dependency lists on column 80 (with \), and - # we should not choose a depcomp mode which is confused by this. - # - # We need to recreate these files for each test, as the compiler may - # overwrite some of them when testing with obscure command lines. - # This happens at least with the AIX C compiler. - : > sub/conftest.c - for i in 1 2 3 4 5 6; do - echo '#include "conftst'$i'.h"' >> sub/conftest.c - # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with - # Solaris 8's {/usr,}/bin/sh. - touch sub/conftst$i.h - done - echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf - - # We check with `-c' and `-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle `-M -o', and we need to detect this. Also, some Intel - # versions had trouble with output in subdirs - am__obj=sub/conftest.${OBJEXT-o} - am__minus_obj="-o $am__obj" - case $depmode in - gcc) - # This depmode causes a compiler race in universal mode. - test "$am__universal" = false || continue - ;; - nosideeffect) - # after this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested - if test "x$enable_dependency_tracking" = xyes; then - continue - else - break - fi - ;; - msvc7 | msvc7msys | msvisualcpp | msvcmsys) - # This compiler won't grok `-c -o', but also, the minuso test has - # not run yet. These depmodes are late enough in the game, and - # so weak that their functioning should not be impacted. - am__obj=conftest.${OBJEXT-o} - am__minus_obj= - ;; - none) break ;; - esac - if depmode=$depmode \ - source=sub/conftest.c object=$am__obj \ - depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ - $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ - >/dev/null 2>conftest.err && - grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && - grep $am__obj sub/conftest.Po > /dev/null 2>&1 && - ${MAKE-make} -s -f confmf > /dev/null 2>&1; then - # icc doesn't choke on unknown options, it will just issue warnings - # or remarks (even with -Werror). So we grep stderr for any message - # that says an option was ignored or not supported. - # When given -MP, icc 7.0 and 7.1 complain thusly: - # icc: Command line warning: ignoring option '-M'; no argument required - # The diagnosis changed in icc 8.0: - # icc: Command line remark: option '-MP' not supported - if (grep 'ignoring option' conftest.err || - grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else - am_cv_CC_dependencies_compiler_type=$depmode - break - fi - fi - done - - cd .. - rm -rf conftest.dir -else - am_cv_CC_dependencies_compiler_type=none -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 -$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } -CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type - - if - test "x$enable_dependency_tracking" != xno \ - && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then - am__fastdepCC_TRUE= - am__fastdepCC_FALSE='#' -else - am__fastdepCC_TRUE='#' - am__fastdepCC_FALSE= -fi - - - case $ac_cv_prog_cc_stdc in #( - no) : - ac_cv_prog_cc_c99=no; ac_cv_prog_cc_c89=no ;; #( - *) : - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C99" >&5 -$as_echo_n "checking for $CC option to accept ISO C99... " >&6; } -if ${ac_cv_prog_cc_c99+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_cv_prog_cc_c99=no -ac_save_CC=$CC -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -#include -#include -#include - -// Check varargs macros. These examples are taken from C99 6.10.3.5. -#define debug(...) fprintf (stderr, __VA_ARGS__) -#define showlist(...) puts (#__VA_ARGS__) -#define report(test,...) ((test) ? puts (#test) : printf (__VA_ARGS__)) -static void -test_varargs_macros (void) -{ - int x = 1234; - int y = 5678; - debug ("Flag"); - debug ("X = %d\n", x); - showlist (The first, second, and third items.); - report (x>y, "x is %d but y is %d", x, y); -} - -// Check long long types. -#define BIG64 18446744073709551615ull -#define BIG32 4294967295ul -#define BIG_OK (BIG64 / BIG32 == 4294967297ull && BIG64 % BIG32 == 0) -#if !BIG_OK - your preprocessor is broken; -#endif -#if BIG_OK -#else - your preprocessor is broken; -#endif -static long long int bignum = -9223372036854775807LL; -static unsigned long long int ubignum = BIG64; - -struct incomplete_array -{ - int datasize; - double data[]; -}; - -struct named_init { - int number; - const wchar_t *name; - double average; -}; - -typedef const char *ccp; - -static inline int -test_restrict (ccp restrict text) -{ - // See if C++-style comments work. - // Iterate through items via the restricted pointer. - // Also check for declarations in for loops. - for (unsigned int i = 0; *(text+i) != '\0'; ++i) - continue; - return 0; -} - -// Check varargs and va_copy. -static void -test_varargs (const char *format, ...) -{ - va_list args; - va_start (args, format); - va_list args_copy; - va_copy (args_copy, args); - - const char *str; - int number; - float fnumber; - - while (*format) - { - switch (*format++) - { - case 's': // string - str = va_arg (args_copy, const char *); - break; - case 'd': // int - number = va_arg (args_copy, int); - break; - case 'f': // float - fnumber = va_arg (args_copy, double); - break; - default: - break; - } - } - va_end (args_copy); - va_end (args); -} - -int -main () -{ - - // Check bool. - _Bool success = false; - - // Check restrict. - if (test_restrict ("String literal") == 0) - success = true; - char *restrict newvar = "Another string"; - - // Check varargs. - test_varargs ("s, d' f .", "string", 65, 34.234); - test_varargs_macros (); - - // Check flexible array members. - struct incomplete_array *ia = - malloc (sizeof (struct incomplete_array) + (sizeof (double) * 10)); - ia->datasize = 10; - for (int i = 0; i < ia->datasize; ++i) - ia->data[i] = i * 1.234; - - // Check named initializers. - struct named_init ni = { - .number = 34, - .name = L"Test wide string", - .average = 543.34343, - }; - - ni.number = 58; - - int dynamic_array[ni.number]; - dynamic_array[ni.number - 1] = 543; - - // work around unused variable warnings - return (!success || bignum == 0LL || ubignum == 0uLL || newvar[0] == 'x' - || dynamic_array[ni.number - 1] != 543); - - ; - return 0; -} -_ACEOF -for ac_arg in '' -std=gnu99 -std=c99 -c99 -AC99 -xc99=all -qlanglvl=extc99 -do - CC="$ac_save_CC $ac_arg" - if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_c99=$ac_arg -fi -rm -f core conftest.err conftest.$ac_objext - test "x$ac_cv_prog_cc_c99" != "xno" && break -done -rm -f conftest.$ac_ext -CC=$ac_save_CC - -fi -# AC_CACHE_VAL -case "x$ac_cv_prog_cc_c99" in - x) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 -$as_echo "none needed" >&6; } ;; - xno) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 -$as_echo "unsupported" >&6; } ;; - *) - CC="$CC $ac_cv_prog_cc_c99" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c99" >&5 -$as_echo "$ac_cv_prog_cc_c99" >&6; } ;; -esac -if test "x$ac_cv_prog_cc_c99" != xno; then : - ac_cv_prog_cc_stdc=$ac_cv_prog_cc_c99 -else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 -$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } -if ${ac_cv_prog_cc_c89+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_cv_prog_cc_c89=no -ac_save_CC=$CC -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -#include -#include -/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ -struct buf { int x; }; -FILE * (*rcsopen) (struct buf *, struct stat *, int); -static char *e (p, i) - char **p; - int i; -{ - return p[i]; -} -static char *f (char * (*g) (char **, int), char **p, ...) -{ - char *s; - va_list v; - va_start (v,p); - s = g (p, va_arg (v,int)); - va_end (v); - return s; -} - -/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has - function prototypes and stuff, but not '\xHH' hex character constants. - These don't provoke an error unfortunately, instead are silently treated - as 'x'. The following induces an error, until -std is added to get - proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an - array size at least. It's necessary to write '\x00'==0 to get something - that's true only with -std. */ -int osf4_cc_array ['\x00' == 0 ? 1 : -1]; - -/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters - inside strings and character constants. */ -#define FOO(x) 'x' -int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; - -int test (int i, double x); -struct s1 {int (*f) (int a);}; -struct s2 {int (*f) (double a);}; -int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); -int argc; -char **argv; -int -main () -{ -return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; - ; - return 0; -} -_ACEOF -for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ - -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" -do - CC="$ac_save_CC $ac_arg" - if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_c89=$ac_arg -fi -rm -f core conftest.err conftest.$ac_objext - test "x$ac_cv_prog_cc_c89" != "xno" && break -done -rm -f conftest.$ac_ext -CC=$ac_save_CC - -fi -# AC_CACHE_VAL -case "x$ac_cv_prog_cc_c89" in - x) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 -$as_echo "none needed" >&6; } ;; - xno) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 -$as_echo "unsupported" >&6; } ;; - *) - CC="$CC $ac_cv_prog_cc_c89" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 -$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; -esac -if test "x$ac_cv_prog_cc_c89" != xno; then : - ac_cv_prog_cc_stdc=$ac_cv_prog_cc_c89 -else - ac_cv_prog_cc_stdc=no -fi - -fi - ;; -esac - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO Standard C" >&5 -$as_echo_n "checking for $CC option to accept ISO Standard C... " >&6; } - if ${ac_cv_prog_cc_stdc+:} false; then : - $as_echo_n "(cached) " >&6 -fi - - case $ac_cv_prog_cc_stdc in #( - no) : - { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 -$as_echo "unsupported" >&6; } ;; #( - '') : - { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 -$as_echo "none needed" >&6; } ;; #( - *) : - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_stdc" >&5 -$as_echo "$ac_cv_prog_cc_stdc" >&6; } ;; -esac - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 -$as_echo_n "checking how to run the C preprocessor... " >&6; } -# On Suns, sometimes $CPP names a directory. -if test -n "$CPP" && test -d "$CPP"; then - CPP= -fi -if test -z "$CPP"; then - if ${ac_cv_prog_CPP+:} false; then : - $as_echo_n "(cached) " >&6 -else - # Double quotes because CPP needs to be expanded - for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" - do - ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - -else - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.i conftest.$ac_ext - - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - # Broken: success on invalid input. -continue -else - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.i conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.i conftest.err conftest.$ac_ext -if $ac_preproc_ok; then : - break -fi - - done - ac_cv_prog_CPP=$CPP - -fi - CPP=$ac_cv_prog_CPP -else - ac_cv_prog_CPP=$CPP -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 -$as_echo "$CPP" >&6; } -ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - -else - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.i conftest.$ac_ext - - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - # Broken: success on invalid input. -continue -else - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.i conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.i conftest.err conftest.$ac_ext -if $ac_preproc_ok; then : - -else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "C preprocessor \"$CPP\" fails sanity check -See \`config.log' for more details" "$LINENO" 5; } -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 -$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } -set x ${MAKE-make} -ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` -if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat >conftest.make <<\_ACEOF -SHELL = /bin/sh -all: - @echo '@@@%%%=$(MAKE)=@@@%%%' -_ACEOF -# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. -case `${MAKE-make} -f conftest.make 2>/dev/null` in - *@@@%%%=?*=@@@%%%*) - eval ac_cv_prog_make_${ac_make}_set=yes;; - *) - eval ac_cv_prog_make_${ac_make}_set=no;; -esac -rm -f conftest.make -fi -if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - SET_MAKE= -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - SET_MAKE="MAKE=${MAKE-make}" -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5 -$as_echo_n "checking whether ln -s works... " >&6; } -LN_S=$as_ln_s -if test "$LN_S" = "ln -s"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5 -$as_echo "no, using $LN_S" >&6; } -fi - - -# Check if LD supports linker scripts, -# and define automake conditional HAVE_LD_VERSION_SCRIPT if so. -# Check whether --enable-ld-version-script was given. -if test "${enable_ld_version_script+set}" = set; then : - enableval=$enable_ld_version_script; have_ld_version_script=$enableval -fi - -if test -z "$have_ld_version_script"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if LD -Wl,--version-script works" >&5 -$as_echo_n "checking if LD -Wl,--version-script works... " >&6; } - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS -Wl,--version-script=conftest.map" - cat > conftest.map <conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - have_ld_version_script=yes -else - have_ld_version_script=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - rm -f conftest.map - LDFLAGS="$save_LDFLAGS" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $have_ld_version_script" >&5 -$as_echo "$have_ld_version_script" >&6; } -fi - if test "$have_ld_version_script" = "yes"; then - HAVE_LD_VERSION_SCRIPT_TRUE= - HAVE_LD_VERSION_SCRIPT_FALSE='#' -else - HAVE_LD_VERSION_SCRIPT_TRUE='#' - HAVE_LD_VERSION_SCRIPT_FALSE= -fi - - -# See if compiler supports prototypes. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for function prototypes" >&5 -$as_echo_n "checking for function prototypes... " >&6; } -if ${ijg_cv_have_prototypes+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int testfunction (int arg1, int * arg2); /* check prototypes */ -struct methods_struct { /* check method-pointer declarations */ - int (*error_exit) (char *msgtext); - int (*trace_message) (char *msgtext); - int (*another_method) (void); -}; -int testfunction (int arg1, int * arg2) /* check definitions */ -{ return arg2[arg1]; } -int test2function (void) /* check void arg list */ -{ return 0; } - -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ijg_cv_have_prototypes=yes -else - ijg_cv_have_prototypes=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ijg_cv_have_prototypes" >&5 -$as_echo "$ijg_cv_have_prototypes" >&6; } -if test $ijg_cv_have_prototypes = yes; then - -$as_echo "#define HAVE_PROTOTYPES 1" >>confdefs.h - -else - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Your compiler does not seem to know about function prototypes. - Perhaps it needs a special switch to enable ANSI C mode. - If so, we recommend running configure like this: - ./configure CC='cc -switch' - where -switch is the proper switch." >&5 -$as_echo "$as_me: WARNING: Your compiler does not seem to know about function prototypes. - Perhaps it needs a special switch to enable ANSI C mode. - If so, we recommend running configure like this: - ./configure CC='cc -switch' - where -switch is the proper switch." >&2;} -fi - -# Check header files -for ac_header in stddef.h stdlib.h locale.h -do : - as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" -if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - -ac_fn_c_check_header_mongrel "$LINENO" "string.h" "ac_cv_header_string_h" "$ac_includes_default" -if test "x$ac_cv_header_string_h" = xyes; then : - -else - -$as_echo "#define NEED_BSD_STRINGS 1" >>confdefs.h - -fi - - - -# See whether type size_t is defined in any ANSI-standard places; -# if not, perhaps it is defined in . -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for size_t" >&5 -$as_echo_n "checking for size_t... " >&6; } -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -#ifdef HAVE_STDDEF_H -#include -#endif -#ifdef HAVE_STDLIB_H -#include -#endif -#include -#ifdef NEED_BSD_STRINGS -#include -#else -#include -#endif -typedef size_t my_size_t; - -int -main () -{ - my_size_t foovar; - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ijg_size_t_ok=yes -else - ijg_size_t_ok="not ANSI, perhaps it is in sys/types.h" -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ijg_size_t_ok" >&5 -$as_echo "$ijg_size_t_ok" >&6; } -if test "$ijg_size_t_ok" != yes; then - ac_fn_c_check_header_mongrel "$LINENO" "sys/types.h" "ac_cv_header_sys_types_h" "$ac_includes_default" -if test "x$ac_cv_header_sys_types_h" = xyes; then : - -$as_echo "#define NEED_SYS_TYPES_H 1" >>confdefs.h - - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "size_t" >/dev/null 2>&1; then : - ijg_size_t_ok="size_t is in sys/types.h" -else - ijg_size_t_ok=no -fi -rm -f conftest* - -else - ijg_size_t_ok=no -fi - - - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ijg_size_t_ok" >&5 -$as_echo "$ijg_size_t_ok" >&6; } - if test "$ijg_size_t_ok" = no; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Type size_t is not defined in any of the usual places. - Try putting '\"typedef unsigned int size_t;\"' in jconfig.h." >&5 -$as_echo "$as_me: WARNING: Type size_t is not defined in any of the usual places. - Try putting '\"typedef unsigned int size_t;\"' in jconfig.h." >&2;} - fi -fi - -# Check compiler characteristics -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for type unsigned char" >&5 -$as_echo_n "checking for type unsigned char... " >&6; } -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - unsigned char un_char; - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - -$as_echo "#define HAVE_UNSIGNED_CHAR 1" >>confdefs.h - -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for type unsigned short" >&5 -$as_echo_n "checking for type unsigned short... " >&6; } -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - unsigned short un_short; - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - -$as_echo "#define HAVE_UNSIGNED_SHORT 1" >>confdefs.h - -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for type void" >&5 -$as_echo_n "checking for type void... " >&6; } -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Caution: a C++ compiler will insist on valid prototypes */ -typedef void * void_ptr; /* check void * */ -#ifdef HAVE_PROTOTYPES /* check ptr to function returning void */ -typedef void (*void_func) (int a, int b); -#else -typedef void (*void_func) (); -#endif - -#ifdef HAVE_PROTOTYPES /* check void function result */ -void test3function (void_ptr arg1, void_func arg2) -#else -void test3function (arg1, arg2) - void_ptr arg1; - void_func arg2; -#endif -{ - char * locptr = (char *) arg1; /* check casting to and from void * */ - arg1 = (void *) locptr; - (*arg2) (1, 2); /* check call of fcn returning void */ -} - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - -$as_echo "#define void char" >>confdefs.h - -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for an ANSI C-conforming const" >&5 -$as_echo_n "checking for an ANSI C-conforming const... " >&6; } -if ${ac_cv_c_const+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ -/* FIXME: Include the comments suggested by Paul. */ -#ifndef __cplusplus - /* Ultrix mips cc rejects this. */ - typedef int charset[2]; - const charset cs; - /* SunOS 4.1.1 cc rejects this. */ - char const *const *pcpcc; - char **ppc; - /* NEC SVR4.0.2 mips cc rejects this. */ - struct point {int x, y;}; - static struct point const zero = {0,0}; - /* AIX XL C 1.02.0.0 rejects this. - It does not let you subtract one const X* pointer from another in - an arm of an if-expression whose if-part is not a constant - expression */ - const char *g = "string"; - pcpcc = &g + (g ? g-g : 0); - /* HPUX 7.0 cc rejects these. */ - ++pcpcc; - ppc = (char**) pcpcc; - pcpcc = (char const *const *) ppc; - { /* SCO 3.2v4 cc rejects this. */ - char *t; - char const *s = 0 ? (char *) 0 : (char const *) 0; - - *t++ = 0; - if (s) return 0; - } - { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */ - int x[] = {25, 17}; - const int *foo = &x[0]; - ++foo; - } - { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */ - typedef const int *iptr; - iptr p = 0; - ++p; - } - { /* AIX XL C 1.02.0.0 rejects this saying - "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */ - struct s { int j; const int *ap[3]; }; - struct s *b; b->j = 5; - } - { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */ - const int foo = 10; - if (!foo) return 0; - } - return !cs[0] && !zero.x; -#endif - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_c_const=yes -else - ac_cv_c_const=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_const" >&5 -$as_echo "$ac_cv_c_const" >&6; } -if test $ac_cv_c_const = no; then - -$as_echo "#define const /**/" >>confdefs.h - -fi - - -# Check for non-broken inline under various spellings -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for inline" >&5 -$as_echo_n "checking for inline... " >&6; } -ijg_cv_inline="" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ -} __inline__ int foo() { return 0; } -int bar() { return foo(); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ijg_cv_inline="__inline__" -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ -} __inline int foo() { return 0; } -int bar() { return foo(); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ijg_cv_inline="__inline" -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ -} inline int foo() { return 0; } -int bar() { return foo(); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ijg_cv_inline="inline" -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ijg_cv_inline" >&5 -$as_echo "$ijg_cv_inline" >&6; } - -cat >>confdefs.h <<_ACEOF -#define INLINE $ijg_cv_inline -_ACEOF - - -# We cannot check for bogus warnings, but at least we can check for errors -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for broken incomplete types" >&5 -$as_echo_n "checking for broken incomplete types... " >&6; } -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - typedef struct undefined_structure * undef_struct_ptr; -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5 -$as_echo "ok" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: broken" >&5 -$as_echo "broken" >&6; } - -$as_echo "#define INCOMPLETE_TYPES_BROKEN 1" >>confdefs.h - -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - -# Test whether global names are unique to at least 15 chars -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for short external names" >&5 -$as_echo_n "checking for short external names... " >&6; } -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int possibly_duplicate_function () { return 0; } -int possibly_dupli_function () { return 1; } - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5 -$as_echo "ok" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: short" >&5 -$as_echo "short" >&6; } - -$as_echo "#define NEED_SHORT_EXTERNAL_NAMES 1" >>confdefs.h - -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - -# Run-time checks -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking to see if char is signed" >&5 -$as_echo_n "checking to see if char is signed... " >&6; } -if test "$cross_compiling" = yes; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Assuming that char is signed on target machine. - If it is unsigned, this will be a little bit inefficient." >&5 -$as_echo "$as_me: WARNING: Assuming that char is signed on target machine. - If it is unsigned, this will be a little bit inefficient." >&2;} - -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -#ifdef HAVE_PROTOTYPES -int is_char_signed (int arg) -#else -int is_char_signed (arg) - int arg; -#endif -{ - if (arg == 189) { /* expected result for unsigned char */ - return 0; /* type char is unsigned */ - } - else if (arg != -67) { /* expected result for signed char */ - printf("Hmm, it seems 'char' is not eight bits wide on your machine.\n"); - printf("I fear the JPEG software will not work at all.\n\n"); - } - return 1; /* assume char is signed otherwise */ -} -char signed_char_check = (char) (-67); -int main() { - exit(is_char_signed((int) signed_char_check)); -} -_ACEOF -if ac_fn_c_try_run "$LINENO"; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - -$as_echo "#define CHAR_IS_UNSIGNED 1" >>confdefs.h - -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } -fi -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ - conftest.$ac_objext conftest.beam conftest.$ac_ext -fi - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking to see if right shift is signed" >&5 -$as_echo_n "checking to see if right shift is signed... " >&6; } -if test "$cross_compiling" = yes; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: result: Assuming that right shift is signed on target machine." >&5 -$as_echo "Assuming that right shift is signed on target machine." >&6; } -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -#ifdef HAVE_PROTOTYPES -int is_shifting_signed (long arg) -#else -int is_shifting_signed (arg) - long arg; -#endif -/* See whether right-shift on a long is signed or not. */ -{ - long res = arg >> 4; - - if (res == -0x7F7E80CL) { /* expected result for signed shift */ - return 1; /* right shift is signed */ - } - /* see if unsigned-shift hack will fix it. */ - /* we can't just test exact value since it depends on width of long... */ - res |= (~0L) << (32-4); - if (res == -0x7F7E80CL) { /* expected result now? */ - return 0; /* right shift is unsigned */ - } - printf("Right shift isn't acting as I expect it to.\n"); - printf("I fear the JPEG software will not work at all.\n\n"); - return 0; /* try it with unsigned anyway */ -} -int main() { - exit(is_shifting_signed(-0x7F7E80B1L)); -} -_ACEOF -if ac_fn_c_try_run "$LINENO"; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - -$as_echo "#define RIGHT_SHIFT_IS_UNSIGNED 1" >>confdefs.h - -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } -fi -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ - conftest.$ac_objext conftest.beam conftest.$ac_ext -fi - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking to see if fopen accepts b spec" >&5 -$as_echo_n "checking to see if fopen accepts b spec... " >&6; } -if test "$cross_compiling" = yes; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: result: Assuming that it does." >&5 -$as_echo "Assuming that it does." >&6; } -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -#include -int main() { - if (fopen("conftestdata", "wb") != NULL) - exit(0); - exit(1); -} -_ACEOF -if ac_fn_c_try_run "$LINENO"; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - -$as_echo "#define DONT_USE_B_MODE 1" >>confdefs.h - -fi -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ - conftest.$ac_objext conftest.beam conftest.$ac_ext -fi - - -# Configure libtool -enable_win32_dll=yes - -case $host in -*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*) - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args. -set dummy ${ac_tool_prefix}as; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_AS+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$AS"; then - ac_cv_prog_AS="$AS" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_AS="${ac_tool_prefix}as" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -AS=$ac_cv_prog_AS -if test -n "$AS"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AS" >&5 -$as_echo "$AS" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_AS"; then - ac_ct_AS=$AS - # Extract the first word of "as", so it can be a program name with args. -set dummy as; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_AS+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_AS"; then - ac_cv_prog_ac_ct_AS="$ac_ct_AS" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_AS="as" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_AS=$ac_cv_prog_ac_ct_AS -if test -n "$ac_ct_AS"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AS" >&5 -$as_echo "$ac_ct_AS" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_AS" = x; then - AS="false" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - AS=$ac_ct_AS - fi -else - AS="$ac_cv_prog_AS" -fi - - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args. -set dummy ${ac_tool_prefix}dlltool; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_DLLTOOL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$DLLTOOL"; then - ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -DLLTOOL=$ac_cv_prog_DLLTOOL -if test -n "$DLLTOOL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5 -$as_echo "$DLLTOOL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_DLLTOOL"; then - ac_ct_DLLTOOL=$DLLTOOL - # Extract the first word of "dlltool", so it can be a program name with args. -set dummy dlltool; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_DLLTOOL"; then - ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_DLLTOOL="dlltool" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL -if test -n "$ac_ct_DLLTOOL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5 -$as_echo "$ac_ct_DLLTOOL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_DLLTOOL" = x; then - DLLTOOL="false" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - DLLTOOL=$ac_ct_DLLTOOL - fi -else - DLLTOOL="$ac_cv_prog_DLLTOOL" -fi - - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. -set dummy ${ac_tool_prefix}objdump; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_OBJDUMP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$OBJDUMP"; then - ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -OBJDUMP=$ac_cv_prog_OBJDUMP -if test -n "$OBJDUMP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5 -$as_echo "$OBJDUMP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_OBJDUMP"; then - ac_ct_OBJDUMP=$OBJDUMP - # Extract the first word of "objdump", so it can be a program name with args. -set dummy objdump; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_OBJDUMP"; then - ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_OBJDUMP="objdump" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP -if test -n "$ac_ct_OBJDUMP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5 -$as_echo "$ac_ct_OBJDUMP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_OBJDUMP" = x; then - OBJDUMP="false" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - OBJDUMP=$ac_ct_OBJDUMP - fi -else - OBJDUMP="$ac_cv_prog_OBJDUMP" -fi - - ;; -esac - -test -z "$AS" && AS=as - - - - - -test -z "$DLLTOOL" && DLLTOOL=dlltool - - - - - -test -z "$OBJDUMP" && OBJDUMP=objdump - - - - - - - -case `pwd` in - *\ * | *\ *) - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5 -$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;; -esac - - - -macro_version='2.4.2' -macro_revision='1.3337' - - - - - - - - - - - - - -ltmain="$ac_aux_dir/ltmain.sh" - -# Backslashify metacharacters that are still active within -# double-quoted strings. -sed_quote_subst='s/\(["`$\\]\)/\\\1/g' - -# Same as above, but do not quote variable references. -double_quote_subst='s/\(["`\\]\)/\\\1/g' - -# Sed substitution to delay expansion of an escaped shell variable in a -# double_quote_subst'ed string. -delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' - -# Sed substitution to delay expansion of an escaped single quote. -delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' - -# Sed substitution to avoid accidental globbing in evaled expressions -no_glob_subst='s/\*/\\\*/g' - -ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO -ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5 -$as_echo_n "checking how to print strings... " >&6; } -# Test print first, because it will be a builtin if present. -if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \ - test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then - ECHO='print -r --' -elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then - ECHO='printf %s\n' -else - # Use this function as a fallback that always works. - func_fallback_echo () - { - eval 'cat <<_LTECHO_EOF -$1 -_LTECHO_EOF' - } - ECHO='func_fallback_echo' -fi - -# func_echo_all arg... -# Invoke $ECHO with all args, space-separated. -func_echo_all () -{ - $ECHO "" -} - -case "$ECHO" in - printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5 -$as_echo "printf" >&6; } ;; - print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5 -$as_echo "print -r" >&6; } ;; - *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5 -$as_echo "cat" >&6; } ;; -esac - - - - - - - - - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5 -$as_echo_n "checking for a sed that does not truncate output... " >&6; } -if ${ac_cv_path_SED+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ - for ac_i in 1 2 3 4 5 6 7; do - ac_script="$ac_script$as_nl$ac_script" - done - echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed - { ac_script=; unset ac_script;} - if test -z "$SED"; then - ac_path_SED_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in sed gsed; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_SED="$as_dir/$ac_prog$ac_exec_ext" - { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue -# Check for GNU ac_path_SED and select it if it is found. - # Check for GNU $ac_path_SED -case `"$ac_path_SED" --version 2>&1` in -*GNU*) - ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;; -*) - ac_count=0 - $as_echo_n 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - $as_echo '' >> "conftest.nl" - "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val - if test $ac_count -gt ${ac_path_SED_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_SED="$ac_path_SED" - ac_path_SED_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - $ac_path_SED_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_SED"; then - as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5 - fi -else - ac_cv_path_SED=$SED -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5 -$as_echo "$ac_cv_path_SED" >&6; } - SED="$ac_cv_path_SED" - rm -f conftest.sed - -test -z "$SED" && SED=sed -Xsed="$SED -e 1s/^X//" - - - - - - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5 -$as_echo_n "checking for fgrep... " >&6; } -if ${ac_cv_path_FGREP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1 - then ac_cv_path_FGREP="$GREP -F" - else - if test -z "$FGREP"; then - ac_path_FGREP_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in fgrep; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext" - { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue -# Check for GNU ac_path_FGREP and select it if it is found. - # Check for GNU $ac_path_FGREP -case `"$ac_path_FGREP" --version 2>&1` in -*GNU*) - ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;; -*) - ac_count=0 - $as_echo_n 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - $as_echo 'FGREP' >> "conftest.nl" - "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val - if test $ac_count -gt ${ac_path_FGREP_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_FGREP="$ac_path_FGREP" - ac_path_FGREP_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - $ac_path_FGREP_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_FGREP"; then - as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 - fi -else - ac_cv_path_FGREP=$FGREP -fi - - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5 -$as_echo "$ac_cv_path_FGREP" >&6; } - FGREP="$ac_cv_path_FGREP" - - -test -z "$GREP" && GREP=grep - - - - - - - - - - - - - - - - - - - -# Check whether --with-gnu-ld was given. -if test "${with_gnu_ld+set}" = set; then : - withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes -else - with_gnu_ld=no -fi - -ac_prog=ld -if test "$GCC" = yes; then - # Check if gcc -print-prog-name=ld gives a path. - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5 -$as_echo_n "checking for ld used by $CC... " >&6; } - case $host in - *-*-mingw*) - # gcc leaves a trailing carriage return which upsets mingw - ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; - *) - ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; - esac - case $ac_prog in - # Accept absolute paths. - [\\/]* | ?:[\\/]*) - re_direlt='/[^/][^/]*/\.\./' - # Canonicalize the pathname of ld - ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` - while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do - ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` - done - test -z "$LD" && LD="$ac_prog" - ;; - "") - # If it fails, then pretend we aren't using GCC. - ac_prog=ld - ;; - *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown - ;; - esac -elif test "$with_gnu_ld" = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 -$as_echo_n "checking for GNU ld... " >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5 -$as_echo_n "checking for non-GNU ld... " >&6; } -fi -if ${lt_cv_path_LD+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -z "$LD"; then - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - lt_cv_path_LD="$ac_dir/$ac_prog" - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some variants of GNU ld only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - case `"$lt_cv_path_LD" -v 2>&1 &5 -$as_echo "$LD" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi -test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5 -$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } -if ${lt_cv_prog_gnu_ld+:} false; then : - $as_echo_n "(cached) " >&6 -else - # I'd rather use --version here, but apparently some GNU lds only accept -v. -case `$LD -v 2>&1 &5 -$as_echo "$lt_cv_prog_gnu_ld" >&6; } -with_gnu_ld=$lt_cv_prog_gnu_ld - - - - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5 -$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; } -if ${lt_cv_path_NM+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$NM"; then - # Let the user override the test. - lt_cv_path_NM="$NM" -else - lt_nm_to_check="${ac_tool_prefix}nm" - if test -n "$ac_tool_prefix" && test "$build" = "$host"; then - lt_nm_to_check="$lt_nm_to_check nm" - fi - for lt_tmp_nm in $lt_nm_to_check; do - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - tmp_nm="$ac_dir/$lt_tmp_nm" - if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then - # Check to see if the nm accepts a BSD-compat flag. - # Adding the `sed 1q' prevents false positives on HP-UX, which says: - # nm: unknown option "B" ignored - # Tru64's nm complains that /dev/null is an invalid object file - case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in - */dev/null* | *'Invalid file or object type'*) - lt_cv_path_NM="$tmp_nm -B" - break - ;; - *) - case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in - */dev/null*) - lt_cv_path_NM="$tmp_nm -p" - break - ;; - *) - lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but - continue # so that we can try to find one that supports BSD flags - ;; - esac - ;; - esac - fi - done - IFS="$lt_save_ifs" - done - : ${lt_cv_path_NM=no} -fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5 -$as_echo "$lt_cv_path_NM" >&6; } -if test "$lt_cv_path_NM" != "no"; then - NM="$lt_cv_path_NM" -else - # Didn't find any BSD compatible name lister, look for dumpbin. - if test -n "$DUMPBIN"; then : - # Let the user override the test. - else - if test -n "$ac_tool_prefix"; then - for ac_prog in dumpbin "link -dump" - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_DUMPBIN+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$DUMPBIN"; then - ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -DUMPBIN=$ac_cv_prog_DUMPBIN -if test -n "$DUMPBIN"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5 -$as_echo "$DUMPBIN" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$DUMPBIN" && break - done -fi -if test -z "$DUMPBIN"; then - ac_ct_DUMPBIN=$DUMPBIN - for ac_prog in dumpbin "link -dump" -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_DUMPBIN+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_DUMPBIN"; then - ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_DUMPBIN="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN -if test -n "$ac_ct_DUMPBIN"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5 -$as_echo "$ac_ct_DUMPBIN" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$ac_ct_DUMPBIN" && break -done - - if test "x$ac_ct_DUMPBIN" = x; then - DUMPBIN=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - DUMPBIN=$ac_ct_DUMPBIN - fi -fi - - case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in - *COFF*) - DUMPBIN="$DUMPBIN -symbols" - ;; - *) - DUMPBIN=: - ;; - esac - fi - - if test "$DUMPBIN" != ":"; then - NM="$DUMPBIN" - fi -fi -test -z "$NM" && NM=nm - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5 -$as_echo_n "checking the name lister ($NM) interface... " >&6; } -if ${lt_cv_nm_interface+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_nm_interface="BSD nm" - echo "int some_variable = 0;" > conftest.$ac_ext - (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5) - (eval "$ac_compile" 2>conftest.err) - cat conftest.err >&5 - (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5) - (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) - cat conftest.err >&5 - (eval echo "\"\$as_me:$LINENO: output\"" >&5) - cat conftest.out >&5 - if $GREP 'External.*some_variable' conftest.out > /dev/null; then - lt_cv_nm_interface="MS dumpbin" - fi - rm -f conftest* -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5 -$as_echo "$lt_cv_nm_interface" >&6; } - -# find the maximum length of command line arguments -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5 -$as_echo_n "checking the maximum length of command line arguments... " >&6; } -if ${lt_cv_sys_max_cmd_len+:} false; then : - $as_echo_n "(cached) " >&6 -else - i=0 - teststring="ABCD" - - case $build_os in - msdosdjgpp*) - # On DJGPP, this test can blow up pretty badly due to problems in libc - # (any single argument exceeding 2000 bytes causes a buffer overrun - # during glob expansion). Even if it were fixed, the result of this - # check would be larger than it should be. - lt_cv_sys_max_cmd_len=12288; # 12K is about right - ;; - - gnu*) - # Under GNU Hurd, this test is not required because there is - # no limit to the length of command line arguments. - # Libtool will interpret -1 as no limit whatsoever - lt_cv_sys_max_cmd_len=-1; - ;; - - cygwin* | mingw* | cegcc*) - # On Win9x/ME, this test blows up -- it succeeds, but takes - # about 5 minutes as the teststring grows exponentially. - # Worse, since 9x/ME are not pre-emptively multitasking, - # you end up with a "frozen" computer, even though with patience - # the test eventually succeeds (with a max line length of 256k). - # Instead, let's just punt: use the minimum linelength reported by - # all of the supported platforms: 8192 (on NT/2K/XP). - lt_cv_sys_max_cmd_len=8192; - ;; - - mint*) - # On MiNT this can take a long time and run out of memory. - lt_cv_sys_max_cmd_len=8192; - ;; - - amigaos*) - # On AmigaOS with pdksh, this test takes hours, literally. - # So we just punt and use a minimum line length of 8192. - lt_cv_sys_max_cmd_len=8192; - ;; - - netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) - # This has been around since 386BSD, at least. Likely further. - if test -x /sbin/sysctl; then - lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` - elif test -x /usr/sbin/sysctl; then - lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` - else - lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs - fi - # And add a safety zone - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` - ;; - - interix*) - # We know the value 262144 and hardcode it with a safety zone (like BSD) - lt_cv_sys_max_cmd_len=196608 - ;; - - os2*) - # The test takes a long time on OS/2. - lt_cv_sys_max_cmd_len=8192 - ;; - - osf*) - # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure - # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not - # nice to cause kernel panics so lets avoid the loop below. - # First set a reasonable default. - lt_cv_sys_max_cmd_len=16384 - # - if test -x /sbin/sysconfig; then - case `/sbin/sysconfig -q proc exec_disable_arg_limit` in - *1*) lt_cv_sys_max_cmd_len=-1 ;; - esac - fi - ;; - sco3.2v5*) - lt_cv_sys_max_cmd_len=102400 - ;; - sysv5* | sco5v6* | sysv4.2uw2*) - kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` - if test -n "$kargmax"; then - lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'` - else - lt_cv_sys_max_cmd_len=32768 - fi - ;; - *) - lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` - if test -n "$lt_cv_sys_max_cmd_len"; then - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` - else - # Make teststring a little bigger before we do anything with it. - # a 1K string should be a reasonable start. - for i in 1 2 3 4 5 6 7 8 ; do - teststring=$teststring$teststring - done - SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} - # If test is not a shell built-in, we'll probably end up computing a - # maximum length that is only half of the actual maximum length, but - # we can't tell. - while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \ - = "X$teststring$teststring"; } >/dev/null 2>&1 && - test $i != 17 # 1/2 MB should be enough - do - i=`expr $i + 1` - teststring=$teststring$teststring - done - # Only check the string length outside the loop. - lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` - teststring= - # Add a significant safety factor because C++ compilers can tack on - # massive amounts of additional arguments before passing them to the - # linker. It appears as though 1/2 is a usable value. - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` - fi - ;; - esac - -fi - -if test -n $lt_cv_sys_max_cmd_len ; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5 -$as_echo "$lt_cv_sys_max_cmd_len" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5 -$as_echo "none" >&6; } -fi -max_cmd_len=$lt_cv_sys_max_cmd_len - - - - - - -: ${CP="cp -f"} -: ${MV="mv -f"} -: ${RM="rm -f"} - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5 -$as_echo_n "checking whether the shell understands some XSI constructs... " >&6; } -# Try some XSI features -xsi_shell=no -( _lt_dummy="a/b/c" - test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \ - = c,a/b,b/c, \ - && eval 'test $(( 1 + 1 )) -eq 2 \ - && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ - && xsi_shell=yes -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5 -$as_echo "$xsi_shell" >&6; } - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5 -$as_echo_n "checking whether the shell understands \"+=\"... " >&6; } -lt_shell_append=no -( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \ - >/dev/null 2>&1 \ - && lt_shell_append=yes -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5 -$as_echo "$lt_shell_append" >&6; } - - -if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then - lt_unset=unset -else - lt_unset=false -fi - - - - - -# test EBCDIC or ASCII -case `echo X|tr X '\101'` in - A) # ASCII based system - # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr - lt_SP2NL='tr \040 \012' - lt_NL2SP='tr \015\012 \040\040' - ;; - *) # EBCDIC based system - lt_SP2NL='tr \100 \n' - lt_NL2SP='tr \r\n \100\100' - ;; -esac - - - - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5 -$as_echo_n "checking how to convert $build file names to $host format... " >&6; } -if ${lt_cv_to_host_file_cmd+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $host in - *-*-mingw* ) - case $build in - *-*-mingw* ) # actually msys - lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32 - ;; - *-*-cygwin* ) - lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32 - ;; - * ) # otherwise, assume *nix - lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32 - ;; - esac - ;; - *-*-cygwin* ) - case $build in - *-*-mingw* ) # actually msys - lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin - ;; - *-*-cygwin* ) - lt_cv_to_host_file_cmd=func_convert_file_noop - ;; - * ) # otherwise, assume *nix - lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin - ;; - esac - ;; - * ) # unhandled hosts (and "normal" native builds) - lt_cv_to_host_file_cmd=func_convert_file_noop - ;; -esac - -fi - -to_host_file_cmd=$lt_cv_to_host_file_cmd -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5 -$as_echo "$lt_cv_to_host_file_cmd" >&6; } - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5 -$as_echo_n "checking how to convert $build file names to toolchain format... " >&6; } -if ${lt_cv_to_tool_file_cmd+:} false; then : - $as_echo_n "(cached) " >&6 -else - #assume ordinary cross tools, or native build. -lt_cv_to_tool_file_cmd=func_convert_file_noop -case $host in - *-*-mingw* ) - case $build in - *-*-mingw* ) # actually msys - lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32 - ;; - esac - ;; -esac - -fi - -to_tool_file_cmd=$lt_cv_to_tool_file_cmd -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5 -$as_echo "$lt_cv_to_tool_file_cmd" >&6; } - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5 -$as_echo_n "checking for $LD option to reload object files... " >&6; } -if ${lt_cv_ld_reload_flag+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_ld_reload_flag='-r' -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5 -$as_echo "$lt_cv_ld_reload_flag" >&6; } -reload_flag=$lt_cv_ld_reload_flag -case $reload_flag in -"" | " "*) ;; -*) reload_flag=" $reload_flag" ;; -esac -reload_cmds='$LD$reload_flag -o $output$reload_objs' -case $host_os in - cygwin* | mingw* | pw32* | cegcc*) - if test "$GCC" != yes; then - reload_cmds=false - fi - ;; - darwin*) - if test "$GCC" = yes; then - reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' - else - reload_cmds='$LD$reload_flag -o $output$reload_objs' - fi - ;; -esac - - - - - - - - - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. -set dummy ${ac_tool_prefix}objdump; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_OBJDUMP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$OBJDUMP"; then - ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -OBJDUMP=$ac_cv_prog_OBJDUMP -if test -n "$OBJDUMP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5 -$as_echo "$OBJDUMP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_OBJDUMP"; then - ac_ct_OBJDUMP=$OBJDUMP - # Extract the first word of "objdump", so it can be a program name with args. -set dummy objdump; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_OBJDUMP"; then - ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_OBJDUMP="objdump" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP -if test -n "$ac_ct_OBJDUMP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5 -$as_echo "$ac_ct_OBJDUMP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_OBJDUMP" = x; then - OBJDUMP="false" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - OBJDUMP=$ac_ct_OBJDUMP - fi -else - OBJDUMP="$ac_cv_prog_OBJDUMP" -fi - -test -z "$OBJDUMP" && OBJDUMP=objdump - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5 -$as_echo_n "checking how to recognize dependent libraries... " >&6; } -if ${lt_cv_deplibs_check_method+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_file_magic_cmd='$MAGIC_CMD' -lt_cv_file_magic_test_file= -lt_cv_deplibs_check_method='unknown' -# Need to set the preceding variable on all platforms that support -# interlibrary dependencies. -# 'none' -- dependencies not supported. -# `unknown' -- same as none, but documents that we really don't know. -# 'pass_all' -- all dependencies passed with no checks. -# 'test_compile' -- check by making test program. -# 'file_magic [[regex]]' -- check by looking for files in library path -# which responds to the $file_magic_cmd with a given extended regex. -# If you have `file' or equivalent on your system and you're not sure -# whether `pass_all' will *always* work, you probably want this one. - -case $host_os in -aix[4-9]*) - lt_cv_deplibs_check_method=pass_all - ;; - -beos*) - lt_cv_deplibs_check_method=pass_all - ;; - -bsdi[45]*) - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' - lt_cv_file_magic_cmd='/usr/bin/file -L' - lt_cv_file_magic_test_file=/shlib/libc.so - ;; - -cygwin*) - # func_win32_libid is a shell function defined in ltmain.sh - lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' - lt_cv_file_magic_cmd='func_win32_libid' - ;; - -mingw* | pw32*) - # Base MSYS/MinGW do not provide the 'file' command needed by - # func_win32_libid shell function, so use a weaker test based on 'objdump', - # unless we find 'file', for example because we are cross-compiling. - # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin. - if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then - lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' - lt_cv_file_magic_cmd='func_win32_libid' - else - # Keep this pattern in sync with the one in func_win32_libid. - lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' - lt_cv_file_magic_cmd='$OBJDUMP -f' - fi - ;; - -cegcc*) - # use the weaker test based on 'objdump'. See mingw*. - lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' - lt_cv_file_magic_cmd='$OBJDUMP -f' - ;; - -darwin* | rhapsody*) - lt_cv_deplibs_check_method=pass_all - ;; - -freebsd* | dragonfly*) - if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then - case $host_cpu in - i*86 ) - # Not sure whether the presence of OpenBSD here was a mistake. - # Let's accept both of them until this is cleared up. - lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` - ;; - esac - else - lt_cv_deplibs_check_method=pass_all - fi - ;; - -gnu*) - lt_cv_deplibs_check_method=pass_all - ;; - -haiku*) - lt_cv_deplibs_check_method=pass_all - ;; - -hpux10.20* | hpux11*) - lt_cv_file_magic_cmd=/usr/bin/file - case $host_cpu in - ia64*) - lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64' - lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so - ;; - hppa*64*) - lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]' - lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl - ;; - *) - lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library' - lt_cv_file_magic_test_file=/usr/lib/libc.sl - ;; - esac - ;; - -interix[3-9]*) - # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$' - ;; - -irix5* | irix6* | nonstopux*) - case $LD in - *-32|*"-32 ") libmagic=32-bit;; - *-n32|*"-n32 ") libmagic=N32;; - *-64|*"-64 ") libmagic=64-bit;; - *) libmagic=never-match;; - esac - lt_cv_deplibs_check_method=pass_all - ;; - -# This must be glibc/ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu) - lt_cv_deplibs_check_method=pass_all - ;; - -netbsd*) - if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' - else - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$' - fi - ;; - -newos6*) - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=/usr/lib/libnls.so - ;; - -*nto* | *qnx*) - lt_cv_deplibs_check_method=pass_all - ;; - -openbsd*) - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$' - else - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' - fi - ;; - -osf3* | osf4* | osf5*) - lt_cv_deplibs_check_method=pass_all - ;; - -rdos*) - lt_cv_deplibs_check_method=pass_all - ;; - -solaris*) - lt_cv_deplibs_check_method=pass_all - ;; - -sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - lt_cv_deplibs_check_method=pass_all - ;; - -sysv4 | sysv4.3*) - case $host_vendor in - motorola) - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` - ;; - ncr) - lt_cv_deplibs_check_method=pass_all - ;; - sequent) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' - ;; - sni) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib" - lt_cv_file_magic_test_file=/lib/libc.so - ;; - siemens) - lt_cv_deplibs_check_method=pass_all - ;; - pc) - lt_cv_deplibs_check_method=pass_all - ;; - esac - ;; - -tpf*) - lt_cv_deplibs_check_method=pass_all - ;; -esac - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5 -$as_echo "$lt_cv_deplibs_check_method" >&6; } - -file_magic_glob= -want_nocaseglob=no -if test "$build" = "$host"; then - case $host_os in - mingw* | pw32*) - if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then - want_nocaseglob=yes - else - file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"` - fi - ;; - esac -fi - -file_magic_cmd=$lt_cv_file_magic_cmd -deplibs_check_method=$lt_cv_deplibs_check_method -test -z "$deplibs_check_method" && deplibs_check_method=unknown - - - - - - - - - - - - - - - - - - - - - - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args. -set dummy ${ac_tool_prefix}dlltool; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_DLLTOOL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$DLLTOOL"; then - ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -DLLTOOL=$ac_cv_prog_DLLTOOL -if test -n "$DLLTOOL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5 -$as_echo "$DLLTOOL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_DLLTOOL"; then - ac_ct_DLLTOOL=$DLLTOOL - # Extract the first word of "dlltool", so it can be a program name with args. -set dummy dlltool; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_DLLTOOL"; then - ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_DLLTOOL="dlltool" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL -if test -n "$ac_ct_DLLTOOL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5 -$as_echo "$ac_ct_DLLTOOL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_DLLTOOL" = x; then - DLLTOOL="false" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - DLLTOOL=$ac_ct_DLLTOOL - fi -else - DLLTOOL="$ac_cv_prog_DLLTOOL" -fi - -test -z "$DLLTOOL" && DLLTOOL=dlltool - - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5 -$as_echo_n "checking how to associate runtime and link libraries... " >&6; } -if ${lt_cv_sharedlib_from_linklib_cmd+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_sharedlib_from_linklib_cmd='unknown' - -case $host_os in -cygwin* | mingw* | pw32* | cegcc*) - # two different shell functions defined in ltmain.sh - # decide which to use based on capabilities of $DLLTOOL - case `$DLLTOOL --help 2>&1` in - *--identify-strict*) - lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib - ;; - *) - lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback - ;; - esac - ;; -*) - # fallback: assume linklib IS sharedlib - lt_cv_sharedlib_from_linklib_cmd="$ECHO" - ;; -esac - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5 -$as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; } -sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd -test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO - - - - - - - -if test -n "$ac_tool_prefix"; then - for ac_prog in ar - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_AR+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$AR"; then - ac_cv_prog_AR="$AR" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_AR="$ac_tool_prefix$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -AR=$ac_cv_prog_AR -if test -n "$AR"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5 -$as_echo "$AR" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$AR" && break - done -fi -if test -z "$AR"; then - ac_ct_AR=$AR - for ac_prog in ar -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_AR+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_AR"; then - ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_AR="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_AR=$ac_cv_prog_ac_ct_AR -if test -n "$ac_ct_AR"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5 -$as_echo "$ac_ct_AR" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$ac_ct_AR" && break -done - - if test "x$ac_ct_AR" = x; then - AR="false" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - AR=$ac_ct_AR - fi -fi - -: ${AR=ar} -: ${AR_FLAGS=cru} - - - - - - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5 -$as_echo_n "checking for archiver @FILE support... " >&6; } -if ${lt_cv_ar_at_file+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_ar_at_file=no - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - echo conftest.$ac_objext > conftest.lst - lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5' - { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 - (eval $lt_ar_try) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - if test "$ac_status" -eq 0; then - # Ensure the archiver fails upon bogus file names. - rm -f conftest.$ac_objext libconftest.a - { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 - (eval $lt_ar_try) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - if test "$ac_status" -ne 0; then - lt_cv_ar_at_file=@ - fi - fi - rm -f conftest.* libconftest.a - -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5 -$as_echo "$lt_cv_ar_at_file" >&6; } - -if test "x$lt_cv_ar_at_file" = xno; then - archiver_list_spec= -else - archiver_list_spec=$lt_cv_ar_at_file -fi - - - - - - - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. -set dummy ${ac_tool_prefix}strip; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_STRIP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$STRIP"; then - ac_cv_prog_STRIP="$STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_STRIP="${ac_tool_prefix}strip" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -STRIP=$ac_cv_prog_STRIP -if test -n "$STRIP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 -$as_echo "$STRIP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_STRIP"; then - ac_ct_STRIP=$STRIP - # Extract the first word of "strip", so it can be a program name with args. -set dummy strip; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_STRIP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_STRIP"; then - ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_STRIP="strip" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP -if test -n "$ac_ct_STRIP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 -$as_echo "$ac_ct_STRIP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_STRIP" = x; then - STRIP=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - STRIP=$ac_ct_STRIP - fi -else - STRIP="$ac_cv_prog_STRIP" -fi - -test -z "$STRIP" && STRIP=: - - - - - - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. -set dummy ${ac_tool_prefix}ranlib; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_RANLIB+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$RANLIB"; then - ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -RANLIB=$ac_cv_prog_RANLIB -if test -n "$RANLIB"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5 -$as_echo "$RANLIB" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_RANLIB"; then - ac_ct_RANLIB=$RANLIB - # Extract the first word of "ranlib", so it can be a program name with args. -set dummy ranlib; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_RANLIB+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_RANLIB"; then - ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_RANLIB="ranlib" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB -if test -n "$ac_ct_RANLIB"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5 -$as_echo "$ac_ct_RANLIB" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_RANLIB" = x; then - RANLIB=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - RANLIB=$ac_ct_RANLIB - fi -else - RANLIB="$ac_cv_prog_RANLIB" -fi - -test -z "$RANLIB" && RANLIB=: - - - - - - -# Determine commands to create old-style static archives. -old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' -old_postinstall_cmds='chmod 644 $oldlib' -old_postuninstall_cmds= - -if test -n "$RANLIB"; then - case $host_os in - openbsd*) - old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib" - ;; - *) - old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib" - ;; - esac - old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib" -fi - -case $host_os in - darwin*) - lock_old_archive_extraction=yes ;; - *) - lock_old_archive_extraction=no ;; -esac - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -# If no C compiler was specified, use CC. -LTCC=${LTCC-"$CC"} - -# If no C compiler flags were specified, use CFLAGS. -LTCFLAGS=${LTCFLAGS-"$CFLAGS"} - -# Allow CC to be a program name with arguments. -compiler=$CC - - -# Check for command to grab the raw symbol name followed by C symbol from nm. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5 -$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; } -if ${lt_cv_sys_global_symbol_pipe+:} false; then : - $as_echo_n "(cached) " >&6 -else - -# These are sane defaults that work on at least a few old systems. -# [They come from Ultrix. What could be older than Ultrix?!! ;)] - -# Character class describing NM global symbol codes. -symcode='[BCDEGRST]' - -# Regexp to match symbols that can be accessed directly from C. -sympat='\([_A-Za-z][_A-Za-z0-9]*\)' - -# Define system-specific variables. -case $host_os in -aix*) - symcode='[BCDT]' - ;; -cygwin* | mingw* | pw32* | cegcc*) - symcode='[ABCDGISTW]' - ;; -hpux*) - if test "$host_cpu" = ia64; then - symcode='[ABCDEGRST]' - fi - ;; -irix* | nonstopux*) - symcode='[BCDEGRST]' - ;; -osf*) - symcode='[BCDEGQRST]' - ;; -solaris*) - symcode='[BDRT]' - ;; -sco3.2v5*) - symcode='[DT]' - ;; -sysv4.2uw2*) - symcode='[DT]' - ;; -sysv5* | sco5v6* | unixware* | OpenUNIX*) - symcode='[ABDT]' - ;; -sysv4) - symcode='[DFNSTU]' - ;; -esac - -# If we're using GNU nm, then use its standard symbol codes. -case `$NM -V 2>&1` in -*GNU* | *'with BFD'*) - symcode='[ABCDGIRSTW]' ;; -esac - -# Transform an extracted symbol line into a proper C declaration. -# Some systems (esp. on ia64) link data and code symbols differently, -# so use this general approach. -lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" - -# Transform an extracted symbol line into symbol name and symbol address -lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'" -lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'" - -# Handle CRLF in mingw tool chain -opt_cr= -case $build_os in -mingw*) - opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp - ;; -esac - -# Try without a prefix underscore, then with it. -for ac_symprfx in "" "_"; do - - # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. - symxfrm="\\1 $ac_symprfx\\2 \\2" - - # Write the raw and C identifiers. - if test "$lt_cv_nm_interface" = "MS dumpbin"; then - # Fake it for dumpbin and say T for any non-static function - # and D for any global variable. - # Also find C++ and __fastcall symbols from MSVC++, - # which start with @ or ?. - lt_cv_sys_global_symbol_pipe="$AWK '"\ -" {last_section=section; section=\$ 3};"\ -" /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\ -" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ -" \$ 0!~/External *\|/{next};"\ -" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ -" {if(hide[section]) next};"\ -" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ -" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ -" s[1]~/^[@?]/{print s[1], s[1]; next};"\ -" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ -" ' prfx=^$ac_symprfx" - else - lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" - fi - lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'" - - # Check to see that the pipe works correctly. - pipe_works=no - - rm -f conftest* - cat > conftest.$ac_ext <<_LT_EOF -#ifdef __cplusplus -extern "C" { -#endif -char nm_test_var; -void nm_test_func(void); -void nm_test_func(void){} -#ifdef __cplusplus -} -#endif -int main(){nm_test_var='a';nm_test_func();return(0);} -_LT_EOF - - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - # Now try to grab the symbols. - nlist=conftest.nm - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\""; } >&5 - (eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && test -s "$nlist"; then - # Try sorting and uniquifying the output. - if sort "$nlist" | uniq > "$nlist"T; then - mv -f "$nlist"T "$nlist" - else - rm -f "$nlist"T - fi - - # Make sure that we snagged all the symbols we need. - if $GREP ' nm_test_var$' "$nlist" >/dev/null; then - if $GREP ' nm_test_func$' "$nlist" >/dev/null; then - cat <<_LT_EOF > conftest.$ac_ext -/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ -#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) -/* DATA imports from DLLs on WIN32 con't be const, because runtime - relocations are performed -- see ld's documentation on pseudo-relocs. */ -# define LT_DLSYM_CONST -#elif defined(__osf__) -/* This system does not cope well with relocations in const data. */ -# define LT_DLSYM_CONST -#else -# define LT_DLSYM_CONST const -#endif - -#ifdef __cplusplus -extern "C" { -#endif - -_LT_EOF - # Now generate the symbol file. - eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' - - cat <<_LT_EOF >> conftest.$ac_ext - -/* The mapping between symbol names and symbols. */ -LT_DLSYM_CONST struct { - const char *name; - void *address; -} -lt__PROGRAM__LTX_preloaded_symbols[] = -{ - { "@PROGRAM@", (void *) 0 }, -_LT_EOF - $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext - cat <<\_LT_EOF >> conftest.$ac_ext - {0, (void *) 0} -}; - -/* This works around a problem in FreeBSD linker */ -#ifdef FREEBSD_WORKAROUND -static const void *lt_preloaded_setup() { - return lt__PROGRAM__LTX_preloaded_symbols; -} -#endif - -#ifdef __cplusplus -} -#endif -_LT_EOF - # Now try linking the two files. - mv conftest.$ac_objext conftstm.$ac_objext - lt_globsym_save_LIBS=$LIBS - lt_globsym_save_CFLAGS=$CFLAGS - LIBS="conftstm.$ac_objext" - CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 - (eval $ac_link) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && test -s conftest${ac_exeext}; then - pipe_works=yes - fi - LIBS=$lt_globsym_save_LIBS - CFLAGS=$lt_globsym_save_CFLAGS - else - echo "cannot find nm_test_func in $nlist" >&5 - fi - else - echo "cannot find nm_test_var in $nlist" >&5 - fi - else - echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5 - fi - else - echo "$progname: failed program was:" >&5 - cat conftest.$ac_ext >&5 - fi - rm -rf conftest* conftst* - - # Do not use the global_symbol_pipe unless it works. - if test "$pipe_works" = yes; then - break - else - lt_cv_sys_global_symbol_pipe= - fi -done - -fi - -if test -z "$lt_cv_sys_global_symbol_pipe"; then - lt_cv_sys_global_symbol_to_cdecl= -fi -if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5 -$as_echo "failed" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5 -$as_echo "ok" >&6; } -fi - -# Response file support. -if test "$lt_cv_nm_interface" = "MS dumpbin"; then - nm_file_list_spec='@' -elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then - nm_file_list_spec='@' -fi - - - - - - - - - - - - - - - - - - - - - - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5 -$as_echo_n "checking for sysroot... " >&6; } - -# Check whether --with-sysroot was given. -if test "${with_sysroot+set}" = set; then : - withval=$with_sysroot; -else - with_sysroot=no -fi - - -lt_sysroot= -case ${with_sysroot} in #( - yes) - if test "$GCC" = yes; then - lt_sysroot=`$CC --print-sysroot 2>/dev/null` - fi - ;; #( - /*) - lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"` - ;; #( - no|'') - ;; #( - *) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_sysroot}" >&5 -$as_echo "${with_sysroot}" >&6; } - as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5 - ;; -esac - - { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5 -$as_echo "${lt_sysroot:-no}" >&6; } - - - - - -# Check whether --enable-libtool-lock was given. -if test "${enable_libtool_lock+set}" = set; then : - enableval=$enable_libtool_lock; -fi - -test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes - -# Some flags need to be propagated to the compiler or linker for good -# libtool support. -case $host in -ia64-*-hpux*) - # Find out which ABI we are using. - echo 'int i;' > conftest.$ac_ext - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - case `/usr/bin/file conftest.$ac_objext` in - *ELF-32*) - HPUX_IA64_MODE="32" - ;; - *ELF-64*) - HPUX_IA64_MODE="64" - ;; - esac - fi - rm -rf conftest* - ;; -*-*-irix6*) - # Find out which ABI we are using. - echo '#line '$LINENO' "configure"' > conftest.$ac_ext - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - if test "$lt_cv_prog_gnu_ld" = yes; then - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -melf32bsmip" - ;; - *N32*) - LD="${LD-ld} -melf32bmipn32" - ;; - *64-bit*) - LD="${LD-ld} -melf64bmip" - ;; - esac - else - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -32" - ;; - *N32*) - LD="${LD-ld} -n32" - ;; - *64-bit*) - LD="${LD-ld} -64" - ;; - esac - fi - fi - rm -rf conftest* - ;; - -x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ -s390*-*linux*|s390*-*tpf*|sparc*-*linux*) - # Find out which ABI we are using. - echo 'int i;' > conftest.$ac_ext - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - case `/usr/bin/file conftest.o` in - *32-bit*) - case $host in - x86_64-*kfreebsd*-gnu) - LD="${LD-ld} -m elf_i386_fbsd" - ;; - x86_64-*linux*) - LD="${LD-ld} -m elf_i386" - ;; - ppc64-*linux*|powerpc64-*linux*) - LD="${LD-ld} -m elf32ppclinux" - ;; - s390x-*linux*) - LD="${LD-ld} -m elf_s390" - ;; - sparc64-*linux*) - LD="${LD-ld} -m elf32_sparc" - ;; - esac - ;; - *64-bit*) - case $host in - x86_64-*kfreebsd*-gnu) - LD="${LD-ld} -m elf_x86_64_fbsd" - ;; - x86_64-*linux*) - LD="${LD-ld} -m elf_x86_64" - ;; - ppc*-*linux*|powerpc*-*linux*) - LD="${LD-ld} -m elf64ppc" - ;; - s390*-*linux*|s390*-*tpf*) - LD="${LD-ld} -m elf64_s390" - ;; - sparc*-*linux*) - LD="${LD-ld} -m elf64_sparc" - ;; - esac - ;; - esac - fi - rm -rf conftest* - ;; - -*-*-sco3.2v5*) - # On SCO OpenServer 5, we need -belf to get full-featured binaries. - SAVE_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -belf" - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5 -$as_echo_n "checking whether the C compiler needs -belf... " >&6; } -if ${lt_cv_cc_needs_belf+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - lt_cv_cc_needs_belf=yes -else - lt_cv_cc_needs_belf=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5 -$as_echo "$lt_cv_cc_needs_belf" >&6; } - if test x"$lt_cv_cc_needs_belf" != x"yes"; then - # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf - CFLAGS="$SAVE_CFLAGS" - fi - ;; -*-*solaris*) - # Find out which ABI we are using. - echo 'int i;' > conftest.$ac_ext - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - case `/usr/bin/file conftest.o` in - *64-bit*) - case $lt_cv_prog_gnu_ld in - yes*) - case $host in - i?86-*-solaris*) - LD="${LD-ld} -m elf_x86_64" - ;; - sparc*-*-solaris*) - LD="${LD-ld} -m elf64_sparc" - ;; - esac - # GNU ld 2.21 introduced _sol2 emulations. Use them if available. - if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then - LD="${LD-ld}_sol2" - fi - ;; - *) - if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then - LD="${LD-ld} -64" - fi - ;; - esac - ;; - esac - fi - rm -rf conftest* - ;; -esac - -need_locks="$enable_libtool_lock" - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args. -set dummy ${ac_tool_prefix}mt; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_MANIFEST_TOOL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$MANIFEST_TOOL"; then - ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL -if test -n "$MANIFEST_TOOL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5 -$as_echo "$MANIFEST_TOOL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_MANIFEST_TOOL"; then - ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL - # Extract the first word of "mt", so it can be a program name with args. -set dummy mt; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_MANIFEST_TOOL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_MANIFEST_TOOL"; then - ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_MANIFEST_TOOL="mt" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL -if test -n "$ac_ct_MANIFEST_TOOL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5 -$as_echo "$ac_ct_MANIFEST_TOOL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_MANIFEST_TOOL" = x; then - MANIFEST_TOOL=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL - fi -else - MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL" -fi - -test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5 -$as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; } -if ${lt_cv_path_mainfest_tool+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_path_mainfest_tool=no - echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5 - $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out - cat conftest.err >&5 - if $GREP 'Manifest Tool' conftest.out > /dev/null; then - lt_cv_path_mainfest_tool=yes - fi - rm -f conftest* -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5 -$as_echo "$lt_cv_path_mainfest_tool" >&6; } -if test "x$lt_cv_path_mainfest_tool" != xyes; then - MANIFEST_TOOL=: -fi - - - - - - - case $host_os in - rhapsody* | darwin*) - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args. -set dummy ${ac_tool_prefix}dsymutil; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_DSYMUTIL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$DSYMUTIL"; then - ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -DSYMUTIL=$ac_cv_prog_DSYMUTIL -if test -n "$DSYMUTIL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5 -$as_echo "$DSYMUTIL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_DSYMUTIL"; then - ac_ct_DSYMUTIL=$DSYMUTIL - # Extract the first word of "dsymutil", so it can be a program name with args. -set dummy dsymutil; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_DSYMUTIL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_DSYMUTIL"; then - ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_DSYMUTIL="dsymutil" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL -if test -n "$ac_ct_DSYMUTIL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5 -$as_echo "$ac_ct_DSYMUTIL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_DSYMUTIL" = x; then - DSYMUTIL=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - DSYMUTIL=$ac_ct_DSYMUTIL - fi -else - DSYMUTIL="$ac_cv_prog_DSYMUTIL" -fi - - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args. -set dummy ${ac_tool_prefix}nmedit; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_NMEDIT+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$NMEDIT"; then - ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -NMEDIT=$ac_cv_prog_NMEDIT -if test -n "$NMEDIT"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5 -$as_echo "$NMEDIT" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_NMEDIT"; then - ac_ct_NMEDIT=$NMEDIT - # Extract the first word of "nmedit", so it can be a program name with args. -set dummy nmedit; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_NMEDIT+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_NMEDIT"; then - ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_NMEDIT="nmedit" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT -if test -n "$ac_ct_NMEDIT"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5 -$as_echo "$ac_ct_NMEDIT" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_NMEDIT" = x; then - NMEDIT=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - NMEDIT=$ac_ct_NMEDIT - fi -else - NMEDIT="$ac_cv_prog_NMEDIT" -fi - - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args. -set dummy ${ac_tool_prefix}lipo; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_LIPO+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$LIPO"; then - ac_cv_prog_LIPO="$LIPO" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_LIPO="${ac_tool_prefix}lipo" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -LIPO=$ac_cv_prog_LIPO -if test -n "$LIPO"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5 -$as_echo "$LIPO" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_LIPO"; then - ac_ct_LIPO=$LIPO - # Extract the first word of "lipo", so it can be a program name with args. -set dummy lipo; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_LIPO+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_LIPO"; then - ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_LIPO="lipo" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO -if test -n "$ac_ct_LIPO"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5 -$as_echo "$ac_ct_LIPO" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_LIPO" = x; then - LIPO=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - LIPO=$ac_ct_LIPO - fi -else - LIPO="$ac_cv_prog_LIPO" -fi - - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args. -set dummy ${ac_tool_prefix}otool; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_OTOOL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$OTOOL"; then - ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_OTOOL="${ac_tool_prefix}otool" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -OTOOL=$ac_cv_prog_OTOOL -if test -n "$OTOOL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5 -$as_echo "$OTOOL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_OTOOL"; then - ac_ct_OTOOL=$OTOOL - # Extract the first word of "otool", so it can be a program name with args. -set dummy otool; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_OTOOL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_OTOOL"; then - ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_OTOOL="otool" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL -if test -n "$ac_ct_OTOOL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5 -$as_echo "$ac_ct_OTOOL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_OTOOL" = x; then - OTOOL=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - OTOOL=$ac_ct_OTOOL - fi -else - OTOOL="$ac_cv_prog_OTOOL" -fi - - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args. -set dummy ${ac_tool_prefix}otool64; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_OTOOL64+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$OTOOL64"; then - ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -OTOOL64=$ac_cv_prog_OTOOL64 -if test -n "$OTOOL64"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5 -$as_echo "$OTOOL64" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_OTOOL64"; then - ac_ct_OTOOL64=$OTOOL64 - # Extract the first word of "otool64", so it can be a program name with args. -set dummy otool64; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_OTOOL64+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_OTOOL64"; then - ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_OTOOL64="otool64" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64 -if test -n "$ac_ct_OTOOL64"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5 -$as_echo "$ac_ct_OTOOL64" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_OTOOL64" = x; then - OTOOL64=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - OTOOL64=$ac_ct_OTOOL64 - fi -else - OTOOL64="$ac_cv_prog_OTOOL64" -fi - - - - - - - - - - - - - - - - - - - - - - - - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5 -$as_echo_n "checking for -single_module linker flag... " >&6; } -if ${lt_cv_apple_cc_single_mod+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_apple_cc_single_mod=no - if test -z "${LT_MULTI_MODULE}"; then - # By default we will add the -single_module flag. You can override - # by either setting the environment variable LT_MULTI_MODULE - # non-empty at configure time, or by adding -multi_module to the - # link flags. - rm -rf libconftest.dylib* - echo "int foo(void){return 1;}" > conftest.c - echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ --dynamiclib -Wl,-single_module conftest.c" >&5 - $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ - -dynamiclib -Wl,-single_module conftest.c 2>conftest.err - _lt_result=$? - # If there is a non-empty error log, and "single_module" - # appears in it, assume the flag caused a linker warning - if test -s conftest.err && $GREP single_module conftest.err; then - cat conftest.err >&5 - # Otherwise, if the output was created with a 0 exit code from - # the compiler, it worked. - elif test -f libconftest.dylib && test $_lt_result -eq 0; then - lt_cv_apple_cc_single_mod=yes - else - cat conftest.err >&5 - fi - rm -rf libconftest.dylib* - rm -f conftest.* - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5 -$as_echo "$lt_cv_apple_cc_single_mod" >&6; } - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5 -$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; } -if ${lt_cv_ld_exported_symbols_list+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_ld_exported_symbols_list=no - save_LDFLAGS=$LDFLAGS - echo "_main" > conftest.sym - LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - lt_cv_ld_exported_symbols_list=yes -else - lt_cv_ld_exported_symbols_list=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - LDFLAGS="$save_LDFLAGS" - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5 -$as_echo "$lt_cv_ld_exported_symbols_list" >&6; } - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5 -$as_echo_n "checking for -force_load linker flag... " >&6; } -if ${lt_cv_ld_force_load+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_ld_force_load=no - cat > conftest.c << _LT_EOF -int forced_loaded() { return 2;} -_LT_EOF - echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5 - $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5 - echo "$AR cru libconftest.a conftest.o" >&5 - $AR cru libconftest.a conftest.o 2>&5 - echo "$RANLIB libconftest.a" >&5 - $RANLIB libconftest.a 2>&5 - cat > conftest.c << _LT_EOF -int main() { return 0;} -_LT_EOF - echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5 - $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err - _lt_result=$? - if test -s conftest.err && $GREP force_load conftest.err; then - cat conftest.err >&5 - elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then - lt_cv_ld_force_load=yes - else - cat conftest.err >&5 - fi - rm -f conftest.err libconftest.a conftest conftest.c - rm -rf conftest.dSYM - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5 -$as_echo "$lt_cv_ld_force_load" >&6; } - case $host_os in - rhapsody* | darwin1.[012]) - _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; - darwin1.*) - _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; - darwin*) # darwin 5.x on - # if running on 10.5 or later, the deployment target defaults - # to the OS version, if on x86, and 10.4, the deployment - # target defaults to 10.4. Don't you love it? - case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in - 10.0,*86*-darwin8*|10.0,*-darwin[91]*) - _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; - 10.[012]*) - _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; - 10.*) - _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; - esac - ;; - esac - if test "$lt_cv_apple_cc_single_mod" = "yes"; then - _lt_dar_single_mod='$single_module' - fi - if test "$lt_cv_ld_exported_symbols_list" = "yes"; then - _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' - else - _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' - fi - if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then - _lt_dsymutil='~$DSYMUTIL $lib || :' - else - _lt_dsymutil= - fi - ;; - esac - -for ac_header in dlfcn.h -do : - ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default -" -if test "x$ac_cv_header_dlfcn_h" = xyes; then : - cat >>confdefs.h <<_ACEOF -#define HAVE_DLFCN_H 1 -_ACEOF - -fi - -done - - - - - -# Set options - - - - enable_dlopen=no - - - - # Check whether --enable-shared was given. -if test "${enable_shared+set}" = set; then : - enableval=$enable_shared; p=${PACKAGE-default} - case $enableval in - yes) enable_shared=yes ;; - no) enable_shared=no ;; - *) - enable_shared=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_shared=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac -else - enable_shared=yes -fi - - - - - - - - - - # Check whether --enable-static was given. -if test "${enable_static+set}" = set; then : - enableval=$enable_static; p=${PACKAGE-default} - case $enableval in - yes) enable_static=yes ;; - no) enable_static=no ;; - *) - enable_static=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_static=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac -else - enable_static=yes -fi - - - - - - - - - - -# Check whether --with-pic was given. -if test "${with_pic+set}" = set; then : - withval=$with_pic; lt_p=${PACKAGE-default} - case $withval in - yes|no) pic_mode=$withval ;; - *) - pic_mode=default - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for lt_pkg in $withval; do - IFS="$lt_save_ifs" - if test "X$lt_pkg" = "X$lt_p"; then - pic_mode=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac -else - pic_mode=default -fi - - -test -z "$pic_mode" && pic_mode=default - - - - - - - - # Check whether --enable-fast-install was given. -if test "${enable_fast_install+set}" = set; then : - enableval=$enable_fast_install; p=${PACKAGE-default} - case $enableval in - yes) enable_fast_install=yes ;; - no) enable_fast_install=no ;; - *) - enable_fast_install=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_fast_install=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac -else - enable_fast_install=yes -fi - - - - - - - - - - - -# This can be used to rebuild libtool when needed -LIBTOOL_DEPS="$ltmain" - -# Always use our own libtool. -LIBTOOL='$(SHELL) $(top_builddir)/libtool' - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -test -z "$LN_S" && LN_S="ln -s" - - - - - - - - - - - - - - -if test -n "${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5 -$as_echo_n "checking for objdir... " >&6; } -if ${lt_cv_objdir+:} false; then : - $as_echo_n "(cached) " >&6 -else - rm -f .libs 2>/dev/null -mkdir .libs 2>/dev/null -if test -d .libs; then - lt_cv_objdir=.libs -else - # MS-DOS does not allow filenames that begin with a dot. - lt_cv_objdir=_libs -fi -rmdir .libs 2>/dev/null -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5 -$as_echo "$lt_cv_objdir" >&6; } -objdir=$lt_cv_objdir - - - - - -cat >>confdefs.h <<_ACEOF -#define LT_OBJDIR "$lt_cv_objdir/" -_ACEOF - - - - -case $host_os in -aix3*) - # AIX sometimes has problems with the GCC collect2 program. For some - # reason, if we set the COLLECT_NAMES environment variable, the problems - # vanish in a puff of smoke. - if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES - fi - ;; -esac - -# Global variables: -ofile=libtool -can_build_shared=yes - -# All known linkers require a `.a' archive for static linking (except MSVC, -# which needs '.lib'). -libext=a - -with_gnu_ld="$lt_cv_prog_gnu_ld" - -old_CC="$CC" -old_CFLAGS="$CFLAGS" - -# Set sane defaults for various variables -test -z "$CC" && CC=cc -test -z "$LTCC" && LTCC=$CC -test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS -test -z "$LD" && LD=ld -test -z "$ac_objext" && ac_objext=o - -for cc_temp in $compiler""; do - case $cc_temp in - compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; - distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; - \-*) ;; - *) break;; - esac -done -cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` - - -# Only perform the check for file, if the check method requires it -test -z "$MAGIC_CMD" && MAGIC_CMD=file -case $deplibs_check_method in -file_magic*) - if test "$file_magic_cmd" = '$MAGIC_CMD'; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5 -$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; } -if ${lt_cv_path_MAGIC_CMD+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $MAGIC_CMD in -[\\/*] | ?:[\\/]*) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. - ;; -*) - lt_save_MAGIC_CMD="$MAGIC_CMD" - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" - for ac_dir in $ac_dummy; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/${ac_tool_prefix}file; then - lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" - if test -n "$file_magic_test_file"; then - case $deplibs_check_method in - "file_magic "*) - file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` - MAGIC_CMD="$lt_cv_path_MAGIC_CMD" - if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | - $EGREP "$file_magic_regex" > /dev/null; then - : - else - cat <<_LT_EOF 1>&2 - -*** Warning: the command libtool uses to detect shared libraries, -*** $file_magic_cmd, produces output that libtool cannot recognize. -*** The result is that libtool may fail to recognize shared libraries -*** as such. This will affect the creation of libtool libraries that -*** depend on shared libraries, but programs linked with such libtool -*** libraries will work regardless of this problem. Nevertheless, you -*** may want to report the problem to your system manager and/or to -*** bug-libtool@gnu.org - -_LT_EOF - fi ;; - esac - fi - break - fi - done - IFS="$lt_save_ifs" - MAGIC_CMD="$lt_save_MAGIC_CMD" - ;; -esac -fi - -MAGIC_CMD="$lt_cv_path_MAGIC_CMD" -if test -n "$MAGIC_CMD"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 -$as_echo "$MAGIC_CMD" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - - - -if test -z "$lt_cv_path_MAGIC_CMD"; then - if test -n "$ac_tool_prefix"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5 -$as_echo_n "checking for file... " >&6; } -if ${lt_cv_path_MAGIC_CMD+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $MAGIC_CMD in -[\\/*] | ?:[\\/]*) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. - ;; -*) - lt_save_MAGIC_CMD="$MAGIC_CMD" - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" - for ac_dir in $ac_dummy; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/file; then - lt_cv_path_MAGIC_CMD="$ac_dir/file" - if test -n "$file_magic_test_file"; then - case $deplibs_check_method in - "file_magic "*) - file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` - MAGIC_CMD="$lt_cv_path_MAGIC_CMD" - if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | - $EGREP "$file_magic_regex" > /dev/null; then - : - else - cat <<_LT_EOF 1>&2 - -*** Warning: the command libtool uses to detect shared libraries, -*** $file_magic_cmd, produces output that libtool cannot recognize. -*** The result is that libtool may fail to recognize shared libraries -*** as such. This will affect the creation of libtool libraries that -*** depend on shared libraries, but programs linked with such libtool -*** libraries will work regardless of this problem. Nevertheless, you -*** may want to report the problem to your system manager and/or to -*** bug-libtool@gnu.org - -_LT_EOF - fi ;; - esac - fi - break - fi - done - IFS="$lt_save_ifs" - MAGIC_CMD="$lt_save_MAGIC_CMD" - ;; -esac -fi - -MAGIC_CMD="$lt_cv_path_MAGIC_CMD" -if test -n "$MAGIC_CMD"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 -$as_echo "$MAGIC_CMD" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - else - MAGIC_CMD=: - fi -fi - - fi - ;; -esac - -# Use C for the default configuration in the libtool script - -lt_save_CC="$CC" -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -# Source file extension for C test sources. -ac_ext=c - -# Object file extension for compiled C test sources. -objext=o -objext=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code="int some_variable = 0;" - -# Code to be used in simple link tests -lt_simple_link_test_code='int main(){return(0);}' - - - - - - - -# If no C compiler was specified, use CC. -LTCC=${LTCC-"$CC"} - -# If no C compiler flags were specified, use CFLAGS. -LTCFLAGS=${LTCFLAGS-"$CFLAGS"} - -# Allow CC to be a program name with arguments. -compiler=$CC - -# Save the default compiler, since it gets overwritten when the other -# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. -compiler_DEFAULT=$CC - -# save warnings/boilerplate of simple test code -ac_outfile=conftest.$ac_objext -echo "$lt_simple_compile_test_code" >conftest.$ac_ext -eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_compiler_boilerplate=`cat conftest.err` -$RM conftest* - -ac_outfile=conftest.$ac_objext -echo "$lt_simple_link_test_code" >conftest.$ac_ext -eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_linker_boilerplate=`cat conftest.err` -$RM -r conftest* - - -if test -n "$compiler"; then - -lt_prog_compiler_no_builtin_flag= - -if test "$GCC" = yes; then - case $cc_basename in - nvcc*) - lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;; - *) - lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;; - esac - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 -$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; } -if ${lt_cv_prog_compiler_rtti_exceptions+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_rtti_exceptions=no - ac_outfile=conftest.$ac_objext - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="-fno-rtti -fno-exceptions" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - # The option is referenced via a variable to avoid confusing sed. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings other than the usual output. - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler_rtti_exceptions=yes - fi - fi - $RM conftest* - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 -$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; } - -if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then - lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" -else - : -fi - -fi - - - - - - - lt_prog_compiler_wl= -lt_prog_compiler_pic= -lt_prog_compiler_static= - - - if test "$GCC" = yes; then - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_static='-static' - - case $host_os in - aix*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - lt_prog_compiler_static='-Bstatic' - fi - ;; - - amigaos*) - case $host_cpu in - powerpc) - # see comment about AmigaOS4 .so support - lt_prog_compiler_pic='-fPIC' - ;; - m68k) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' - ;; - esac - ;; - - beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; - - mingw* | cygwin* | pw32* | os2* | cegcc*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - # Although the cygwin gcc ignores -fPIC, still need this for old-style - # (--disable-auto-import) libraries - lt_prog_compiler_pic='-DDLL_EXPORT' - ;; - - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - lt_prog_compiler_pic='-fno-common' - ;; - - haiku*) - # PIC is the default for Haiku. - # The "-static" flag exists, but is broken. - lt_prog_compiler_static= - ;; - - hpux*) - # PIC is the default for 64-bit PA HP-UX, but not for 32-bit - # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag - # sets the default TLS model and affects inlining. - case $host_cpu in - hppa*64*) - # +Z the default - ;; - *) - lt_prog_compiler_pic='-fPIC' - ;; - esac - ;; - - interix[3-9]*) - # Interix 3.x gcc -fpic/-fPIC options generate broken code. - # Instead, we relocate shared libraries at runtime. - ;; - - msdosdjgpp*) - # Just because we use GCC doesn't mean we suddenly get shared libraries - # on systems that don't support them. - lt_prog_compiler_can_build_shared=no - enable_shared=no - ;; - - *nto* | *qnx*) - # QNX uses GNU C++, but need to define -shared option too, otherwise - # it will coredump. - lt_prog_compiler_pic='-fPIC -shared' - ;; - - sysv4*MP*) - if test -d /usr/nec; then - lt_prog_compiler_pic=-Kconform_pic - fi - ;; - - *) - lt_prog_compiler_pic='-fPIC' - ;; - esac - - case $cc_basename in - nvcc*) # Cuda Compiler Driver 2.2 - lt_prog_compiler_wl='-Xlinker ' - if test -n "$lt_prog_compiler_pic"; then - lt_prog_compiler_pic="-Xcompiler $lt_prog_compiler_pic" - fi - ;; - esac - else - # PORTME Check for flag to pass linker flags through the system compiler. - case $host_os in - aix*) - lt_prog_compiler_wl='-Wl,' - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - lt_prog_compiler_static='-Bstatic' - else - lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp' - fi - ;; - - mingw* | cygwin* | pw32* | os2* | cegcc*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - lt_prog_compiler_pic='-DDLL_EXPORT' - ;; - - hpux9* | hpux10* | hpux11*) - lt_prog_compiler_wl='-Wl,' - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case $host_cpu in - hppa*64*|ia64*) - # +Z the default - ;; - *) - lt_prog_compiler_pic='+Z' - ;; - esac - # Is there a better lt_prog_compiler_static that works with the bundled CC? - lt_prog_compiler_static='${wl}-a ${wl}archive' - ;; - - irix5* | irix6* | nonstopux*) - lt_prog_compiler_wl='-Wl,' - # PIC (with -KPIC) is the default. - lt_prog_compiler_static='-non_shared' - ;; - - linux* | k*bsd*-gnu | kopensolaris*-gnu) - case $cc_basename in - # old Intel for x86_64 which still supported -KPIC. - ecc*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-static' - ;; - # icc used to be incompatible with GCC. - # ICC 10 doesn't accept -KPIC any more. - icc* | ifort*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-fPIC' - lt_prog_compiler_static='-static' - ;; - # Lahey Fortran 8.1. - lf95*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='--shared' - lt_prog_compiler_static='--static' - ;; - nagfor*) - # NAG Fortran compiler - lt_prog_compiler_wl='-Wl,-Wl,,' - lt_prog_compiler_pic='-PIC' - lt_prog_compiler_static='-Bstatic' - ;; - pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) - # Portland Group compilers (*not* the Pentium gcc compiler, - # which looks to be a dead project) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-fpic' - lt_prog_compiler_static='-Bstatic' - ;; - ccc*) - lt_prog_compiler_wl='-Wl,' - # All Alpha code is PIC. - lt_prog_compiler_static='-non_shared' - ;; - xl* | bgxl* | bgf* | mpixl*) - # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-qpic' - lt_prog_compiler_static='-qstaticlink' - ;; - *) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [1-7].* | *Sun*Fortran*\ 8.[0-3]*) - # Sun Fortran 8.3 passes all unrecognized flags to the linker - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - lt_prog_compiler_wl='' - ;; - *Sun\ F* | *Sun*Fortran*) - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - lt_prog_compiler_wl='-Qoption ld ' - ;; - *Sun\ C*) - # Sun C 5.9 - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - lt_prog_compiler_wl='-Wl,' - ;; - *Intel*\ [CF]*Compiler*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-fPIC' - lt_prog_compiler_static='-static' - ;; - *Portland\ Group*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-fpic' - lt_prog_compiler_static='-Bstatic' - ;; - esac - ;; - esac - ;; - - newsos6) - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - ;; - - *nto* | *qnx*) - # QNX uses GNU C++, but need to define -shared option too, otherwise - # it will coredump. - lt_prog_compiler_pic='-fPIC -shared' - ;; - - osf3* | osf4* | osf5*) - lt_prog_compiler_wl='-Wl,' - # All OSF/1 code is PIC. - lt_prog_compiler_static='-non_shared' - ;; - - rdos*) - lt_prog_compiler_static='-non_shared' - ;; - - solaris*) - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - case $cc_basename in - f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) - lt_prog_compiler_wl='-Qoption ld ';; - *) - lt_prog_compiler_wl='-Wl,';; - esac - ;; - - sunos4*) - lt_prog_compiler_wl='-Qoption ld ' - lt_prog_compiler_pic='-PIC' - lt_prog_compiler_static='-Bstatic' - ;; - - sysv4 | sysv4.2uw2* | sysv4.3*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - ;; - - sysv4*MP*) - if test -d /usr/nec ;then - lt_prog_compiler_pic='-Kconform_pic' - lt_prog_compiler_static='-Bstatic' - fi - ;; - - sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - ;; - - unicos*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_can_build_shared=no - ;; - - uts4*) - lt_prog_compiler_pic='-pic' - lt_prog_compiler_static='-Bstatic' - ;; - - *) - lt_prog_compiler_can_build_shared=no - ;; - esac - fi - -case $host_os in - # For platforms which do not support PIC, -DPIC is meaningless: - *djgpp*) - lt_prog_compiler_pic= - ;; - *) - lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" - ;; -esac - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 -$as_echo_n "checking for $compiler option to produce PIC... " >&6; } -if ${lt_cv_prog_compiler_pic+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_pic=$lt_prog_compiler_pic -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5 -$as_echo "$lt_cv_prog_compiler_pic" >&6; } -lt_prog_compiler_pic=$lt_cv_prog_compiler_pic - -# -# Check to make sure the PIC flag actually works. -# -if test -n "$lt_prog_compiler_pic"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 -$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; } -if ${lt_cv_prog_compiler_pic_works+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_pic_works=no - ac_outfile=conftest.$ac_objext - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="$lt_prog_compiler_pic -DPIC" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - # The option is referenced via a variable to avoid confusing sed. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings other than the usual output. - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler_pic_works=yes - fi - fi - $RM conftest* - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5 -$as_echo "$lt_cv_prog_compiler_pic_works" >&6; } - -if test x"$lt_cv_prog_compiler_pic_works" = xyes; then - case $lt_prog_compiler_pic in - "" | " "*) ;; - *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;; - esac -else - lt_prog_compiler_pic= - lt_prog_compiler_can_build_shared=no -fi - -fi - - - - - - - - - - - -# -# Check to make sure the static flag actually works. -# -wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5 -$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } -if ${lt_cv_prog_compiler_static_works+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_static_works=no - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS $lt_tmp_static_flag" - echo "$lt_simple_link_test_code" > conftest.$ac_ext - if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then - # The linker can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - # Append any errors to the config.log. - cat conftest.err 1>&5 - $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler_static_works=yes - fi - else - lt_cv_prog_compiler_static_works=yes - fi - fi - $RM -r conftest* - LDFLAGS="$save_LDFLAGS" - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5 -$as_echo "$lt_cv_prog_compiler_static_works" >&6; } - -if test x"$lt_cv_prog_compiler_static_works" = xyes; then - : -else - lt_prog_compiler_static= -fi - - - - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 -$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } -if ${lt_cv_prog_compiler_c_o+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_c_o=no - $RM -r conftest 2>/dev/null - mkdir conftest - cd conftest - mkdir out - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - - lt_compiler_flag="-o out/conftest2.$ac_objext" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) - (eval "$lt_compile" 2>out/conftest.err) - ac_status=$? - cat out/conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s out/conftest2.$ac_objext - then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp - $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 - if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then - lt_cv_prog_compiler_c_o=yes - fi - fi - chmod u+w . 2>&5 - $RM conftest* - # SGI C++ compiler will create directory out/ii_files/ for - # template instantiation - test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files - $RM out/* && rmdir out - cd .. - $RM -r conftest - $RM conftest* - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 -$as_echo "$lt_cv_prog_compiler_c_o" >&6; } - - - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 -$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } -if ${lt_cv_prog_compiler_c_o+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_c_o=no - $RM -r conftest 2>/dev/null - mkdir conftest - cd conftest - mkdir out - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - - lt_compiler_flag="-o out/conftest2.$ac_objext" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) - (eval "$lt_compile" 2>out/conftest.err) - ac_status=$? - cat out/conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s out/conftest2.$ac_objext - then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp - $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 - if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then - lt_cv_prog_compiler_c_o=yes - fi - fi - chmod u+w . 2>&5 - $RM conftest* - # SGI C++ compiler will create directory out/ii_files/ for - # template instantiation - test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files - $RM out/* && rmdir out - cd .. - $RM -r conftest - $RM conftest* - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 -$as_echo "$lt_cv_prog_compiler_c_o" >&6; } - - - - -hard_links="nottested" -if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then - # do not overwrite the value of need_locks provided by the user - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5 -$as_echo_n "checking if we can lock with hard links... " >&6; } - hard_links=yes - $RM conftest* - ln conftest.a conftest.b 2>/dev/null && hard_links=no - touch conftest.a - ln conftest.a conftest.b 2>&5 || hard_links=no - ln conftest.a conftest.b 2>/dev/null && hard_links=no - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5 -$as_echo "$hard_links" >&6; } - if test "$hard_links" = no; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 -$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} - need_locks=warn - fi -else - need_locks=no -fi - - - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 -$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } - - runpath_var= - allow_undefined_flag= - always_export_symbols=no - archive_cmds= - archive_expsym_cmds= - compiler_needs_object=no - enable_shared_with_static_runtimes=no - export_dynamic_flag_spec= - export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - hardcode_automatic=no - hardcode_direct=no - hardcode_direct_absolute=no - hardcode_libdir_flag_spec= - hardcode_libdir_separator= - hardcode_minus_L=no - hardcode_shlibpath_var=unsupported - inherit_rpath=no - link_all_deplibs=unknown - module_cmds= - module_expsym_cmds= - old_archive_from_new_cmds= - old_archive_from_expsyms_cmds= - thread_safe_flag_spec= - whole_archive_flag_spec= - # include_expsyms should be a list of space-separated symbols to be *always* - # included in the symbol list - include_expsyms= - # exclude_expsyms can be an extended regexp of symbols to exclude - # it will be wrapped by ` (' and `)$', so one must not match beginning or - # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', - # as well as any symbol that contains `d'. - exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' - # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out - # platforms (ab)use it in PIC code, but their linkers get confused if - # the symbol is explicitly referenced. Since portable code cannot - # rely on this symbol name, it's probably fine to never include it in - # preloaded symbol tables. - # Exclude shared library initialization/finalization symbols. - extract_expsyms_cmds= - - case $host_os in - cygwin* | mingw* | pw32* | cegcc*) - # FIXME: the MSVC++ port hasn't been tested in a loooong time - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - if test "$GCC" != yes; then - with_gnu_ld=no - fi - ;; - interix*) - # we just hope/assume this is gcc and not c89 (= MSVC++) - with_gnu_ld=yes - ;; - openbsd*) - with_gnu_ld=no - ;; - esac - - ld_shlibs=yes - - # On some targets, GNU ld is compatible enough with the native linker - # that we're better off using the native interface for both. - lt_use_gnu_ld_interface=no - if test "$with_gnu_ld" = yes; then - case $host_os in - aix*) - # The AIX port of GNU ld has always aspired to compatibility - # with the native linker. However, as the warning in the GNU ld - # block says, versions before 2.19.5* couldn't really create working - # shared libraries, regardless of the interface used. - case `$LD -v 2>&1` in - *\ \(GNU\ Binutils\)\ 2.19.5*) ;; - *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;; - *\ \(GNU\ Binutils\)\ [3-9]*) ;; - *) - lt_use_gnu_ld_interface=yes - ;; - esac - ;; - *) - lt_use_gnu_ld_interface=yes - ;; - esac - fi - - if test "$lt_use_gnu_ld_interface" = yes; then - # If archive_cmds runs LD, not CC, wlarc should be empty - wlarc='${wl}' - - # Set some defaults for GNU ld with shared library support. These - # are reset later if shared libraries are not supported. Putting them - # here allows them to be overridden if necessary. - runpath_var=LD_RUN_PATH - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - export_dynamic_flag_spec='${wl}--export-dynamic' - # ancient GNU ld didn't support --whole-archive et. al. - if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then - whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - whole_archive_flag_spec= - fi - supports_anon_versioning=no - case `$LD -v 2>&1` in - *GNU\ gold*) supports_anon_versioning=yes ;; - *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 - *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... - *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... - *\ 2.11.*) ;; # other 2.11 versions - *) supports_anon_versioning=yes ;; - esac - - # See if GNU ld supports shared libraries. - case $host_os in - aix[3-9]*) - # On AIX/PPC, the GNU linker is very broken - if test "$host_cpu" != ia64; then - ld_shlibs=no - cat <<_LT_EOF 1>&2 - -*** Warning: the GNU linker, at least up to release 2.19, is reported -*** to be unable to reliably create shared libraries on AIX. -*** Therefore, libtool is disabling shared libraries support. If you -*** really care for shared libraries, you may want to install binutils -*** 2.20 or above, or modify your PATH so that a non-GNU linker is found. -*** You will then need to restart the configuration process. - -_LT_EOF - fi - ;; - - amigaos*) - case $host_cpu in - powerpc) - # see comment about AmigaOS4 .so support - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='' - ;; - m68k) - archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - ;; - esac - ;; - - beos*) - if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - allow_undefined_flag=unsupported - # Joseph Beckenbach says some releases of gcc - # support --undefined. This deserves some investigation. FIXME - archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - else - ld_shlibs=no - fi - ;; - - cygwin* | mingw* | pw32* | cegcc*) - # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, - # as there is no search path for DLLs. - hardcode_libdir_flag_spec='-L$libdir' - export_dynamic_flag_spec='${wl}--export-all-symbols' - allow_undefined_flag=unsupported - always_export_symbols=no - enable_shared_with_static_runtimes=yes - export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols' - exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname' - - if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is; otherwise, prepend... - archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname.def; - else - echo EXPORTS > $output_objdir/$soname.def; - cat $export_symbols >> $output_objdir/$soname.def; - fi~ - $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - else - ld_shlibs=no - fi - ;; - - haiku*) - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - link_all_deplibs=yes - ;; - - interix[3-9]*) - hardcode_direct=no - hardcode_shlibpath_var=no - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - export_dynamic_flag_spec='${wl}-E' - # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. - # Instead, shared libraries are loaded at an image base (0x10000000 by - # default) and relocated if they conflict, which is a slow very memory - # consuming and fragmenting process. To avoid this, we pick a random, - # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link - # time. Moving up from 0x10000000 also allows more sbrk(2) space. - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - ;; - - gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) - tmp_diet=no - if test "$host_os" = linux-dietlibc; then - case $cc_basename in - diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) - esac - fi - if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ - && test "$tmp_diet" = no - then - tmp_addflag=' $pic_flag' - tmp_sharedflag='-shared' - case $cc_basename,$host_cpu in - pgcc*) # Portland Group C compiler - whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' - tmp_addflag=' $pic_flag' - ;; - pgf77* | pgf90* | pgf95* | pgfortran*) - # Portland Group f77 and f90 compilers - whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' - tmp_addflag=' $pic_flag -Mnomain' ;; - ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 - tmp_addflag=' -i_dynamic' ;; - efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 - tmp_addflag=' -i_dynamic -nofor_main' ;; - ifc* | ifort*) # Intel Fortran compiler - tmp_addflag=' -nofor_main' ;; - lf95*) # Lahey Fortran 8.1 - whole_archive_flag_spec= - tmp_sharedflag='--shared' ;; - xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below) - tmp_sharedflag='-qmkshrobj' - tmp_addflag= ;; - nvcc*) # Cuda Compiler Driver 2.2 - whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' - compiler_needs_object=yes - ;; - esac - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) # Sun C 5.9 - whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' - compiler_needs_object=yes - tmp_sharedflag='-G' ;; - *Sun\ F*) # Sun Fortran 8.3 - tmp_sharedflag='-G' ;; - esac - archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - - if test "x$supports_anon_versioning" = xyes; then - archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - echo "local: *; };" >> $output_objdir/$libname.ver~ - $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' - fi - - case $cc_basename in - xlf* | bgf* | bgxlf* | mpixlf*) - # IBM XL Fortran 10.1 on PPC cannot create shared libs itself - whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive' - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' - if test "x$supports_anon_versioning" = xyes; then - archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - echo "local: *; };" >> $output_objdir/$libname.ver~ - $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' - fi - ;; - esac - else - ld_shlibs=no - fi - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' - wlarc= - else - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - fi - ;; - - solaris*) - if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then - ld_shlibs=no - cat <<_LT_EOF 1>&2 - -*** Warning: The releases 2.8.* of the GNU linker cannot reliably -*** create shared libraries on Solaris systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.9.1 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. - -_LT_EOF - elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs=no - fi - ;; - - sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) - case `$LD -v 2>&1` in - *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) - ld_shlibs=no - cat <<_LT_EOF 1>&2 - -*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not -*** reliably create shared libraries on SCO systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.16.91.0.3 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. - -_LT_EOF - ;; - *) - # For security reasons, it is highly recommended that you always - # use absolute paths for naming shared libraries, and exclude the - # DT_RUNPATH tag from executables and libraries. But doing so - # requires that you compile everything twice, which is a pain. - if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs=no - fi - ;; - esac - ;; - - sunos4*) - archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' - wlarc= - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - *) - if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs=no - fi - ;; - esac - - if test "$ld_shlibs" = no; then - runpath_var= - hardcode_libdir_flag_spec= - export_dynamic_flag_spec= - whole_archive_flag_spec= - fi - else - # PORTME fill in a description of your system's linker (not GNU ld) - case $host_os in - aix3*) - allow_undefined_flag=unsupported - always_export_symbols=yes - archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' - # Note: this linker hardcodes the directories in LIBPATH if there - # are no directories specified by -L. - hardcode_minus_L=yes - if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then - # Neither direct hardcoding nor static linking is supported with a - # broken collect2. - hardcode_direct=unsupported - fi - ;; - - aix[4-9]*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag="" - else - # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to AIX nm, but means don't demangle with GNU nm - # Also, AIX nm treats weak defined symbols like other global - # defined symbols, whereas GNU nm marks them as "W". - if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then - export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' - else - export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' - fi - aix_use_runtimelinking=no - - # Test if we are trying to use run time linking or normal - # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # need to do runtime linking. - case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) - for ld_flag in $LDFLAGS; do - if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then - aix_use_runtimelinking=yes - break - fi - done - ;; - esac - - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' - fi - - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - - archive_cmds='' - hardcode_direct=yes - hardcode_direct_absolute=yes - hardcode_libdir_separator=':' - link_all_deplibs=yes - file_list_spec='${wl}-f,' - - if test "$GCC" = yes; then - case $host_os in aix4.[012]|aix4.[012].*) - # We only want to do this on AIX 4.2 and lower, the check - # below for broken collect2 doesn't work under 4.3+ - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && - strings "$collect2name" | $GREP resolve_lib_name >/dev/null - then - # We have reworked collect2 - : - else - # We have old collect2 - hardcode_direct=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - hardcode_minus_L=yes - hardcode_libdir_flag_spec='-L$libdir' - hardcode_libdir_separator= - fi - ;; - esac - shared_flag='-shared' - if test "$aix_use_runtimelinking" = yes; then - shared_flag="$shared_flag "'${wl}-G' - fi - else - # not using gcc - if test "$host_cpu" = ia64; then - # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release - # chokes on -Wl,-G. The following line is correct: - shared_flag='-G' - else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='${wl}-G' - else - shared_flag='${wl}-bM:SRE' - fi - fi - fi - - export_dynamic_flag_spec='${wl}-bexpall' - # It seems that -bexpall does not export symbols beginning with - # underscore (_), so it is better to generate a list of symbols to export. - always_export_symbols=yes - if test "$aix_use_runtimelinking" = yes; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - allow_undefined_flag='-berok' - # Determine the default libpath from the value encoded in an - # empty executable. - if test "${lt_cv_aix_libpath+set}" = set; then - aix_libpath=$lt_cv_aix_libpath -else - if ${lt_cv_aix_libpath_+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - - lt_aix_libpath_sed=' - /Import File Strings/,/^$/ { - /^0/ { - s/^0 *\([^ ]*\) *$/\1/ - p - } - }' - lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - # Check for a 64-bit object if we didn't find anything. - if test -z "$lt_cv_aix_libpath_"; then - lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - fi -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - if test -z "$lt_cv_aix_libpath_"; then - lt_cv_aix_libpath_="/usr/lib:/lib" - fi - -fi - - aix_libpath=$lt_cv_aix_libpath_ -fi - - hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" - archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else - if test "$host_cpu" = ia64; then - hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' - allow_undefined_flag="-z nodefs" - archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" - else - # Determine the default libpath from the value encoded in an - # empty executable. - if test "${lt_cv_aix_libpath+set}" = set; then - aix_libpath=$lt_cv_aix_libpath -else - if ${lt_cv_aix_libpath_+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - - lt_aix_libpath_sed=' - /Import File Strings/,/^$/ { - /^0/ { - s/^0 *\([^ ]*\) *$/\1/ - p - } - }' - lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - # Check for a 64-bit object if we didn't find anything. - if test -z "$lt_cv_aix_libpath_"; then - lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - fi -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - if test -z "$lt_cv_aix_libpath_"; then - lt_cv_aix_libpath_="/usr/lib:/lib" - fi - -fi - - aix_libpath=$lt_cv_aix_libpath_ -fi - - hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - no_undefined_flag=' ${wl}-bernotok' - allow_undefined_flag=' ${wl}-berok' - if test "$with_gnu_ld" = yes; then - # We only use this code for GNU lds that support --whole-archive. - whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive' - else - # Exported symbols can be pulled into shared objects from archives - whole_archive_flag_spec='$convenience' - fi - archive_cmds_need_lc=yes - # This is similar to how AIX traditionally builds its shared libraries. - archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' - fi - fi - ;; - - amigaos*) - case $host_cpu in - powerpc) - # see comment about AmigaOS4 .so support - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='' - ;; - m68k) - archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - ;; - esac - ;; - - bsdi[45]*) - export_dynamic_flag_spec=-rdynamic - ;; - - cygwin* | mingw* | pw32* | cegcc*) - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - case $cc_basename in - cl*) - # Native MSVC - hardcode_libdir_flag_spec=' ' - allow_undefined_flag=unsupported - always_export_symbols=yes - file_list_spec='@' - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" - # FIXME: Setting linknames here is a bad hack. - archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' - archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; - else - sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; - fi~ - $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ - linknames=' - # The linker will not automatically build a static lib if we build a DLL. - # _LT_TAGVAR(old_archive_from_new_cmds, )='true' - enable_shared_with_static_runtimes=yes - exclude_expsyms='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' - export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' - # Don't use ranlib - old_postinstall_cmds='chmod 644 $oldlib' - postlink_cmds='lt_outputfile="@OUTPUT@"~ - lt_tool_outputfile="@TOOL_OUTPUT@"~ - case $lt_outputfile in - *.exe|*.EXE) ;; - *) - lt_outputfile="$lt_outputfile.exe" - lt_tool_outputfile="$lt_tool_outputfile.exe" - ;; - esac~ - if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then - $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; - $RM "$lt_outputfile.manifest"; - fi' - ;; - *) - # Assume MSVC wrapper - hardcode_libdir_flag_spec=' ' - allow_undefined_flag=unsupported - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" - # FIXME: Setting linknames here is a bad hack. - archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' - # The linker will automatically build a .lib file if we build a DLL. - old_archive_from_new_cmds='true' - # FIXME: Should let the user specify the lib program. - old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' - enable_shared_with_static_runtimes=yes - ;; - esac - ;; - - darwin* | rhapsody*) - - - archive_cmds_need_lc=no - hardcode_direct=no - hardcode_automatic=yes - hardcode_shlibpath_var=unsupported - if test "$lt_cv_ld_force_load" = "yes"; then - whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' - - else - whole_archive_flag_spec='' - fi - link_all_deplibs=yes - allow_undefined_flag="$_lt_dar_allow_undefined" - case $cc_basename in - ifort*) _lt_dar_can_shared=yes ;; - *) _lt_dar_can_shared=$GCC ;; - esac - if test "$_lt_dar_can_shared" = "yes"; then - output_verbose_link_cmd=func_echo_all - archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" - module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" - archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" - module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" - - else - ld_shlibs=no - fi - - ;; - - dgux*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_shlibpath_var=no - ;; - - # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor - # support. Future versions do this automatically, but an explicit c++rt0.o - # does not break anything, and helps significantly (at the cost of a little - # extra space). - freebsd2.2*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - # Unfortunately, older versions of FreeBSD 2 do not have this feature. - freebsd2.*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes - hardcode_minus_L=yes - hardcode_shlibpath_var=no - ;; - - # FreeBSD 3 and greater uses gcc -shared to do shared libraries. - freebsd* | dragonfly*) - archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - hpux9*) - if test "$GCC" = yes; then - archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - else - archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - fi - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_libdir_separator=: - hardcode_direct=yes - - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L=yes - export_dynamic_flag_spec='${wl}-E' - ;; - - hpux10*) - if test "$GCC" = yes && test "$with_gnu_ld" = no; then - archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' - fi - if test "$with_gnu_ld" = no; then - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_libdir_separator=: - hardcode_direct=yes - hardcode_direct_absolute=yes - export_dynamic_flag_spec='${wl}-E' - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L=yes - fi - ;; - - hpux11*) - if test "$GCC" = yes && test "$with_gnu_ld" = no; then - case $host_cpu in - hppa*64*) - archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - ia64*) - archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - else - case $host_cpu in - hppa*64*) - archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - ia64*) - archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - - # Older versions of the 11.00 compiler do not understand -b yet - # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does) - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5 -$as_echo_n "checking if $CC understands -b... " >&6; } -if ${lt_cv_prog_compiler__b+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler__b=no - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS -b" - echo "$lt_simple_link_test_code" > conftest.$ac_ext - if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then - # The linker can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - # Append any errors to the config.log. - cat conftest.err 1>&5 - $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler__b=yes - fi - else - lt_cv_prog_compiler__b=yes - fi - fi - $RM -r conftest* - LDFLAGS="$save_LDFLAGS" - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5 -$as_echo "$lt_cv_prog_compiler__b" >&6; } - -if test x"$lt_cv_prog_compiler__b" = xyes; then - archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' -else - archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' -fi - - ;; - esac - fi - if test "$with_gnu_ld" = no; then - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_libdir_separator=: - - case $host_cpu in - hppa*64*|ia64*) - hardcode_direct=no - hardcode_shlibpath_var=no - ;; - *) - hardcode_direct=yes - hardcode_direct_absolute=yes - export_dynamic_flag_spec='${wl}-E' - - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L=yes - ;; - esac - fi - ;; - - irix5* | irix6* | nonstopux*) - if test "$GCC" = yes; then - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - # Try to use the -exported_symbol ld option, if it does not - # work, assume that -exports_file does not work either and - # implicitly export all symbols. - # This should be the same for all languages, so no per-tag cache variable. - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5 -$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; } -if ${lt_cv_irix_exported_symbol+:} false; then : - $as_echo_n "(cached) " >&6 -else - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -int foo (void) { return 0; } -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - lt_cv_irix_exported_symbol=yes -else - lt_cv_irix_exported_symbol=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - LDFLAGS="$save_LDFLAGS" -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5 -$as_echo "$lt_cv_irix_exported_symbol" >&6; } - if test "$lt_cv_irix_exported_symbol" = yes; then - archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' - fi - else - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' - fi - archive_cmds_need_lc='no' - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - inherit_rpath=yes - link_all_deplibs=yes - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out - else - archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF - fi - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - newsos6) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - hardcode_shlibpath_var=no - ;; - - *nto* | *qnx*) - ;; - - openbsd*) - if test -f /usr/libexec/ld.so; then - hardcode_direct=yes - hardcode_shlibpath_var=no - hardcode_direct_absolute=yes - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - export_dynamic_flag_spec='${wl}-E' - else - case $host_os in - openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-R$libdir' - ;; - *) - archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - ;; - esac - fi - else - ld_shlibs=no - fi - ;; - - os2*) - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - allow_undefined_flag=unsupported - archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' - old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' - ;; - - osf3*) - if test "$GCC" = yes; then - allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' - fi - archive_cmds_need_lc='no' - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - ;; - - osf4* | osf5*) # as osf3* with the addition of -msym flag - if test "$GCC" = yes; then - allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - else - allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' - archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ - $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' - - # Both c and cxx compiler support -rpath directly - hardcode_libdir_flag_spec='-rpath $libdir' - fi - archive_cmds_need_lc='no' - hardcode_libdir_separator=: - ;; - - solaris*) - no_undefined_flag=' -z defs' - if test "$GCC" = yes; then - wlarc='${wl}' - archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' - else - case `$CC -V 2>&1` in - *"Compilers 5.0"*) - wlarc='' - archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' - ;; - *) - wlarc='${wl}' - archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' - ;; - esac - fi - hardcode_libdir_flag_spec='-R$libdir' - hardcode_shlibpath_var=no - case $host_os in - solaris2.[0-5] | solaris2.[0-5].*) ;; - *) - # The compiler driver will combine and reorder linker options, - # but understands `-z linker_flag'. GCC discards it without `$wl', - # but is careful enough not to reorder. - # Supported since Solaris 2.6 (maybe 2.5.1?) - if test "$GCC" = yes; then - whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' - else - whole_archive_flag_spec='-z allextract$convenience -z defaultextract' - fi - ;; - esac - link_all_deplibs=yes - ;; - - sunos4*) - if test "x$host_vendor" = xsequent; then - # Use $CC to link under sequent, because it throws in some extra .o - # files that make .init and .fini sections work. - archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' - fi - hardcode_libdir_flag_spec='-L$libdir' - hardcode_direct=yes - hardcode_minus_L=yes - hardcode_shlibpath_var=no - ;; - - sysv4) - case $host_vendor in - sni) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes # is this really true??? - ;; - siemens) - ## LD is ld it makes a PLAMLIB - ## CC just makes a GrossModule. - archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' - reload_cmds='$CC -r -o $output$reload_objs' - hardcode_direct=no - ;; - motorola) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=no #Motorola manual says yes, but my tests say they lie - ;; - esac - runpath_var='LD_RUN_PATH' - hardcode_shlibpath_var=no - ;; - - sysv4.3*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var=no - export_dynamic_flag_spec='-Bexport' - ;; - - sysv4*MP*) - if test -d /usr/nec; then - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var=no - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - ld_shlibs=yes - fi - ;; - - sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) - no_undefined_flag='${wl}-z,text' - archive_cmds_need_lc=no - hardcode_shlibpath_var=no - runpath_var='LD_RUN_PATH' - - if test "$GCC" = yes; then - archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - ;; - - sysv5* | sco3.2v5* | sco5v6*) - # Note: We can NOT use -z defs as we might desire, because we do not - # link with -lc, and that would cause any symbols used from libc to - # always be unresolved, which means just about no library would - # ever link correctly. If we're not using GNU ld we use -z text - # though, which does catch some bad symbols but isn't as heavy-handed - # as -z defs. - no_undefined_flag='${wl}-z,text' - allow_undefined_flag='${wl}-z,nodefs' - archive_cmds_need_lc=no - hardcode_shlibpath_var=no - hardcode_libdir_flag_spec='${wl}-R,$libdir' - hardcode_libdir_separator=':' - link_all_deplibs=yes - export_dynamic_flag_spec='${wl}-Bexport' - runpath_var='LD_RUN_PATH' - - if test "$GCC" = yes; then - archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - ;; - - uts4*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_shlibpath_var=no - ;; - - *) - ld_shlibs=no - ;; - esac - - if test x$host_vendor = xsni; then - case $host in - sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - export_dynamic_flag_spec='${wl}-Blargedynsym' - ;; - esac - fi - fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5 -$as_echo "$ld_shlibs" >&6; } -test "$ld_shlibs" = no && can_build_shared=no - -with_gnu_ld=$with_gnu_ld - - - - - - - - - - - - - - - -# -# Do we need to explicitly link libc? -# -case "x$archive_cmds_need_lc" in -x|xyes) - # Assume -lc should be added - archive_cmds_need_lc=yes - - if test "$enable_shared" = yes && test "$GCC" = yes; then - case $archive_cmds in - *'~'*) - # FIXME: we may have to deal with multi-command sequences. - ;; - '$CC '*) - # Test whether the compiler implicitly links with -lc since on some - # systems, -lgcc has to come before -lc. If gcc already passes -lc - # to ld, don't add -lc before -lgcc. - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5 -$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } -if ${lt_cv_archive_cmds_need_lc+:} false; then : - $as_echo_n "(cached) " >&6 -else - $RM conftest* - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } 2>conftest.err; then - soname=conftest - lib=conftest - libobjs=conftest.$ac_objext - deplibs= - wl=$lt_prog_compiler_wl - pic_flag=$lt_prog_compiler_pic - compiler_flags=-v - linker_flags=-v - verstring= - output_objdir=. - libname=conftest - lt_save_allow_undefined_flag=$allow_undefined_flag - allow_undefined_flag= - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5 - (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - then - lt_cv_archive_cmds_need_lc=no - else - lt_cv_archive_cmds_need_lc=yes - fi - allow_undefined_flag=$lt_save_allow_undefined_flag - else - cat conftest.err 1>&5 - fi - $RM conftest* - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5 -$as_echo "$lt_cv_archive_cmds_need_lc" >&6; } - archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc - ;; - esac - fi - ;; -esac - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5 -$as_echo_n "checking dynamic linker characteristics... " >&6; } - -if test "$GCC" = yes; then - case $host_os in - darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; - *) lt_awk_arg="/^libraries:/" ;; - esac - case $host_os in - mingw* | cegcc*) lt_sed_strip_eq="s,=\([A-Za-z]:\),\1,g" ;; - *) lt_sed_strip_eq="s,=/,/,g" ;; - esac - lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` - case $lt_search_path_spec in - *\;*) - # if the path contains ";" then we assume it to be the separator - # otherwise default to the standard path separator (i.e. ":") - it is - # assumed that no part of a normal pathname contains ";" but that should - # okay in the real world where ";" in dirpaths is itself problematic. - lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'` - ;; - *) - lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"` - ;; - esac - # Ok, now we have the path, separated by spaces, we can step through it - # and add multilib dir if necessary. - lt_tmp_lt_search_path_spec= - lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` - for lt_sys_path in $lt_search_path_spec; do - if test -d "$lt_sys_path/$lt_multi_os_dir"; then - lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" - else - test -d "$lt_sys_path" && \ - lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" - fi - done - lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk ' -BEGIN {RS=" "; FS="/|\n";} { - lt_foo=""; - lt_count=0; - for (lt_i = NF; lt_i > 0; lt_i--) { - if ($lt_i != "" && $lt_i != ".") { - if ($lt_i == "..") { - lt_count++; - } else { - if (lt_count == 0) { - lt_foo="/" $lt_i lt_foo; - } else { - lt_count--; - } - } - } - } - if (lt_foo != "") { lt_freq[lt_foo]++; } - if (lt_freq[lt_foo] == 1) { print lt_foo; } -}'` - # AWK program above erroneously prepends '/' to C:/dos/paths - # for these hosts. - case $host_os in - mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ - $SED 's,/\([A-Za-z]:\),\1,g'` ;; - esac - sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` -else - sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" -fi -library_names_spec= -libname_spec='lib$name' -soname_spec= -shrext_cmds=".so" -postinstall_cmds= -postuninstall_cmds= -finish_cmds= -finish_eval= -shlibpath_var= -shlibpath_overrides_runpath=unknown -version_type=none -dynamic_linker="$host_os ld.so" -sys_lib_dlsearch_path_spec="/lib /usr/lib" -need_lib_prefix=unknown -hardcode_into_libs=no - -# when you set need_version to no, make sure it does not cause -set_version -# flags to be left without arguments -need_version=unknown - -case $host_os in -aix3*) - version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' - shlibpath_var=LIBPATH - - # AIX 3 has no versioning support, so we append a major version to the name. - soname_spec='${libname}${release}${shared_ext}$major' - ;; - -aix[4-9]*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - hardcode_into_libs=yes - if test "$host_cpu" = ia64; then - # AIX 5 supports IA64 - library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - else - # With GCC up to 2.95.x, collect2 would create an import file - # for dependence libraries. The import file would start with - # the line `#! .'. This would cause the generated library to - # depend on `.', always an invalid library. This was fixed in - # development snapshots of GCC prior to 3.0. - case $host_os in - aix4 | aix4.[01] | aix4.[01].*) - if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' - echo ' yes ' - echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then - : - else - can_build_shared=no - fi - ;; - esac - # AIX (on Power*) has no versioning support, so currently we can not hardcode correct - # soname into executable. Probably we can add versioning support to - # collect2, so additional links can be useful in future. - if test "$aix_use_runtimelinking" = yes; then - # If using run time linking (on AIX 4.2 or later) use lib.so - # instead of lib.a to let people know that these are not - # typical AIX shared libraries. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - else - # We preserve .a as extension for shared libraries through AIX4.2 - # and later when we are not doing run time linking. - library_names_spec='${libname}${release}.a $libname.a' - soname_spec='${libname}${release}${shared_ext}$major' - fi - shlibpath_var=LIBPATH - fi - ;; - -amigaos*) - case $host_cpu in - powerpc) - # Since July 2007 AmigaOS4 officially supports .so libraries. - # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - ;; - m68k) - library_names_spec='$libname.ixlibrary $libname.a' - # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' - ;; - esac - ;; - -beos*) - library_names_spec='${libname}${shared_ext}' - dynamic_linker="$host_os ld.so" - shlibpath_var=LIBRARY_PATH - ;; - -bsdi[45]*) - version_type=linux # correct to gnu/linux during the next big refactor - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" - sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" - # the default ld.so.conf also contains /usr/contrib/lib and - # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow - # libtool to hard-code these into programs - ;; - -cygwin* | mingw* | pw32* | cegcc*) - version_type=windows - shrext_cmds=".dll" - need_version=no - need_lib_prefix=no - - case $GCC,$cc_basename in - yes,*) - # gcc - library_names_spec='$libname.dll.a' - # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \${file}`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname~ - chmod a+x \$dldir/$dlname~ - if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then - eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; - fi' - postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $RM \$dlpath' - shlibpath_overrides_runpath=yes - - case $host_os in - cygwin*) - # Cygwin DLLs use 'cyg' prefix rather than 'lib' - soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - - sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api" - ;; - mingw* | cegcc*) - # MinGW DLLs use traditional 'lib' prefix - soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - ;; - pw32*) - # pw32 DLLs use 'pw' prefix rather than 'lib' - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - ;; - esac - dynamic_linker='Win32 ld.exe' - ;; - - *,cl*) - # Native MSVC - libname_spec='$name' - soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - library_names_spec='${libname}.dll.lib' - - case $build_os in - mingw*) - sys_lib_search_path_spec= - lt_save_ifs=$IFS - IFS=';' - for lt_path in $LIB - do - IFS=$lt_save_ifs - # Let DOS variable expansion print the short 8.3 style file name. - lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` - sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" - done - IFS=$lt_save_ifs - # Convert to MSYS style. - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'` - ;; - cygwin*) - # Convert to unix form, then to dos form, then back to unix form - # but this time dos style (no spaces!) so that the unix form looks - # like /cygdrive/c/PROGRA~1:/cygdr... - sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` - sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` - sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - ;; - *) - sys_lib_search_path_spec="$LIB" - if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then - # It is most probably a Windows format PATH. - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` - else - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - fi - # FIXME: find the short name or the path components, as spaces are - # common. (e.g. "Program Files" -> "PROGRA~1") - ;; - esac - - # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \${file}`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname' - postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $RM \$dlpath' - shlibpath_overrides_runpath=yes - dynamic_linker='Win32 link.exe' - ;; - - *) - # Assume MSVC wrapper - library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' - dynamic_linker='Win32 ld.exe' - ;; - esac - # FIXME: first we should search . and the directory the executable is in - shlibpath_var=PATH - ;; - -darwin* | rhapsody*) - dynamic_linker="$host_os dyld" - version_type=darwin - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' - soname_spec='${libname}${release}${major}$shared_ext' - shlibpath_overrides_runpath=yes - shlibpath_var=DYLD_LIBRARY_PATH - shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' - - sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib" - sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' - ;; - -dgux*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -freebsd* | dragonfly*) - # DragonFly does not have aout. When/if they implement a new - # versioning mechanism, adjust this. - if test -x /usr/bin/objformat; then - objformat=`/usr/bin/objformat` - else - case $host_os in - freebsd[23].*) objformat=aout ;; - *) objformat=elf ;; - esac - fi - version_type=freebsd-$objformat - case $version_type in - freebsd-elf*) - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' - need_version=no - need_lib_prefix=no - ;; - freebsd-*) - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' - need_version=yes - ;; - esac - shlibpath_var=LD_LIBRARY_PATH - case $host_os in - freebsd2.*) - shlibpath_overrides_runpath=yes - ;; - freebsd3.[01]* | freebsdelf3.[01]*) - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ - freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - *) # from 4.6 on, and DragonFly - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - esac - ;; - -gnu*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - -haiku*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - dynamic_linker="$host_os runtime_loader" - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LIBRARY_PATH - shlibpath_overrides_runpath=yes - sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' - hardcode_into_libs=yes - ;; - -hpux9* | hpux10* | hpux11*) - # Give a soname corresponding to the major version so that dld.sl refuses to - # link against other versions. - version_type=sunos - need_lib_prefix=no - need_version=no - case $host_cpu in - ia64*) - shrext_cmds='.so' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.so" - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - if test "X$HPUX_IA64_MODE" = X32; then - sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" - else - sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" - fi - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - hppa*64*) - shrext_cmds='.sl' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.sl" - shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - *) - shrext_cmds='.sl' - dynamic_linker="$host_os dld.sl" - shlibpath_var=SHLIB_PATH - shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - ;; - esac - # HP-UX runs *really* slowly unless shared libraries are mode 555, ... - postinstall_cmds='chmod 555 $lib' - # or fails outright, so override atomically: - install_override_mode=555 - ;; - -interix[3-9]*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - -irix5* | irix6* | nonstopux*) - case $host_os in - nonstopux*) version_type=nonstopux ;; - *) - if test "$lt_cv_prog_gnu_ld" = yes; then - version_type=linux # correct to gnu/linux during the next big refactor - else - version_type=irix - fi ;; - esac - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' - case $host_os in - irix5* | nonstopux*) - libsuff= shlibsuff= - ;; - *) - case $LD in # libtool.m4 will add one of these switches to LD - *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") - libsuff= shlibsuff= libmagic=32-bit;; - *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") - libsuff=32 shlibsuff=N32 libmagic=N32;; - *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") - libsuff=64 shlibsuff=64 libmagic=64-bit;; - *) libsuff= shlibsuff= libmagic=never-match;; - esac - ;; - esac - shlibpath_var=LD_LIBRARY${shlibsuff}_PATH - shlibpath_overrides_runpath=no - sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" - sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" - hardcode_into_libs=yes - ;; - -# No shared lib support for Linux oldld, aout, or coff. -linux*oldld* | linux*aout* | linux*coff*) - dynamic_linker=no - ;; - -# This must be glibc/ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - - # Some binutils ld are patched to set DT_RUNPATH - if ${lt_cv_shlibpath_overrides_runpath+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_shlibpath_overrides_runpath=no - save_LDFLAGS=$LDFLAGS - save_libdir=$libdir - eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \ - LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\"" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then : - lt_cv_shlibpath_overrides_runpath=yes -fi -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - LDFLAGS=$save_LDFLAGS - libdir=$save_libdir - -fi - - shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath - - # This implies no fast_install, which is unacceptable. - # Some rework will be needed to allow for fast_install - # before this can be enabled. - hardcode_into_libs=yes - - # Append ld.so.conf contents to the search path - if test -f /etc/ld.so.conf; then - lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` - sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" - fi - - # We used to test for /lib/ld.so.1 and disable shared libraries on - # powerpc, because MkLinux only supported shared libraries with the - # GNU dynamic linker. Since this was broken with cross compilers, - # most powerpc-linux boxes support dynamic linking these days and - # people can always --disable-shared, the test was removed, and we - # assume the GNU/Linux dynamic linker is in use. - dynamic_linker='GNU/Linux ld.so' - ;; - -netbsd*) - version_type=sunos - need_lib_prefix=no - need_version=no - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - dynamic_linker='NetBSD (a.out) ld.so' - else - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - dynamic_linker='NetBSD ld.elf_so' - fi - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - -newsos6) - version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; - -*nto* | *qnx*) - version_type=qnx - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - dynamic_linker='ldqnx.so' - ;; - -openbsd*) - version_type=sunos - sys_lib_dlsearch_path_spec="/usr/lib" - need_lib_prefix=no - # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. - case $host_os in - openbsd3.3 | openbsd3.3.*) need_version=yes ;; - *) need_version=no ;; - esac - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - shlibpath_var=LD_LIBRARY_PATH - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - case $host_os in - openbsd2.[89] | openbsd2.[89].*) - shlibpath_overrides_runpath=no - ;; - *) - shlibpath_overrides_runpath=yes - ;; - esac - else - shlibpath_overrides_runpath=yes - fi - ;; - -os2*) - libname_spec='$name' - shrext_cmds=".dll" - need_lib_prefix=no - library_names_spec='$libname${shared_ext} $libname.a' - dynamic_linker='OS/2 ld.exe' - shlibpath_var=LIBPATH - ;; - -osf3* | osf4* | osf5*) - version_type=osf - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" - sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" - ;; - -rdos*) - dynamic_linker=no - ;; - -solaris*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - # ldd complains unless libraries are executable - postinstall_cmds='chmod +x $lib' - ;; - -sunos4*) - version_type=sunos - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - if test "$with_gnu_ld" = yes; then - need_lib_prefix=no - fi - need_version=yes - ;; - -sysv4 | sysv4.3*) - version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - case $host_vendor in - sni) - shlibpath_overrides_runpath=no - need_lib_prefix=no - runpath_var=LD_RUN_PATH - ;; - siemens) - need_lib_prefix=no - ;; - motorola) - need_lib_prefix=no - need_version=no - shlibpath_overrides_runpath=no - sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' - ;; - esac - ;; - -sysv4*MP*) - if test -d /usr/nec ;then - version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' - soname_spec='$libname${shared_ext}.$major' - shlibpath_var=LD_LIBRARY_PATH - fi - ;; - -sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - version_type=freebsd-elf - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - if test "$with_gnu_ld" = yes; then - sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' - else - sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' - case $host_os in - sco3.2v5*) - sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" - ;; - esac - fi - sys_lib_dlsearch_path_spec='/usr/lib' - ;; - -tpf*) - # TPF is a cross-target only. Preferred cross-host = GNU/Linux. - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - -uts4*) - version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -*) - dynamic_linker=no - ;; -esac -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5 -$as_echo "$dynamic_linker" >&6; } -test "$dynamic_linker" = no && can_build_shared=no - -variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -if test "$GCC" = yes; then - variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" -fi - -if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then - sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" -fi -if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then - sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" -fi - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5 -$as_echo_n "checking how to hardcode library paths into programs... " >&6; } -hardcode_action= -if test -n "$hardcode_libdir_flag_spec" || - test -n "$runpath_var" || - test "X$hardcode_automatic" = "Xyes" ; then - - # We can hardcode non-existent directories. - if test "$hardcode_direct" != no && - # If the only mechanism to avoid hardcoding is shlibpath_var, we - # have to relink, otherwise we might link with an installed library - # when we should be linking with a yet-to-be-installed one - ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no && - test "$hardcode_minus_L" != no; then - # Linking always hardcodes the temporary library directory. - hardcode_action=relink - else - # We can link without hardcoding, and we can hardcode nonexisting dirs. - hardcode_action=immediate - fi -else - # We cannot hardcode anything, or else we can only hardcode existing - # directories. - hardcode_action=unsupported -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5 -$as_echo "$hardcode_action" >&6; } - -if test "$hardcode_action" = relink || - test "$inherit_rpath" = yes; then - # Fast installation is not supported - enable_fast_install=no -elif test "$shlibpath_overrides_runpath" = yes || - test "$enable_shared" = no; then - # Fast installation is not necessary - enable_fast_install=needless -fi - - - - - - - if test "x$enable_dlopen" != xyes; then - enable_dlopen=unknown - enable_dlopen_self=unknown - enable_dlopen_self_static=unknown -else - lt_cv_dlopen=no - lt_cv_dlopen_libs= - - case $host_os in - beos*) - lt_cv_dlopen="load_add_on" - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - ;; - - mingw* | pw32* | cegcc*) - lt_cv_dlopen="LoadLibrary" - lt_cv_dlopen_libs= - ;; - - cygwin*) - lt_cv_dlopen="dlopen" - lt_cv_dlopen_libs= - ;; - - darwin*) - # if libdl is installed we need to link against it - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 -$as_echo_n "checking for dlopen in -ldl... " >&6; } -if ${ac_cv_lib_dl_dlopen+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldl $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dlopen (); -int -main () -{ -return dlopen (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_dl_dlopen=yes -else - ac_cv_lib_dl_dlopen=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 -$as_echo "$ac_cv_lib_dl_dlopen" >&6; } -if test "x$ac_cv_lib_dl_dlopen" = xyes; then : - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" -else - - lt_cv_dlopen="dyld" - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - -fi - - ;; - - *) - ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load" -if test "x$ac_cv_func_shl_load" = xyes; then : - lt_cv_dlopen="shl_load" -else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5 -$as_echo_n "checking for shl_load in -ldld... " >&6; } -if ${ac_cv_lib_dld_shl_load+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldld $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char shl_load (); -int -main () -{ -return shl_load (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_dld_shl_load=yes -else - ac_cv_lib_dld_shl_load=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5 -$as_echo "$ac_cv_lib_dld_shl_load" >&6; } -if test "x$ac_cv_lib_dld_shl_load" = xyes; then : - lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld" -else - ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen" -if test "x$ac_cv_func_dlopen" = xyes; then : - lt_cv_dlopen="dlopen" -else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 -$as_echo_n "checking for dlopen in -ldl... " >&6; } -if ${ac_cv_lib_dl_dlopen+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldl $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dlopen (); -int -main () -{ -return dlopen (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_dl_dlopen=yes -else - ac_cv_lib_dl_dlopen=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 -$as_echo "$ac_cv_lib_dl_dlopen" >&6; } -if test "x$ac_cv_lib_dl_dlopen" = xyes; then : - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" -else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5 -$as_echo_n "checking for dlopen in -lsvld... " >&6; } -if ${ac_cv_lib_svld_dlopen+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lsvld $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dlopen (); -int -main () -{ -return dlopen (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_svld_dlopen=yes -else - ac_cv_lib_svld_dlopen=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5 -$as_echo "$ac_cv_lib_svld_dlopen" >&6; } -if test "x$ac_cv_lib_svld_dlopen" = xyes; then : - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" -else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5 -$as_echo_n "checking for dld_link in -ldld... " >&6; } -if ${ac_cv_lib_dld_dld_link+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldld $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dld_link (); -int -main () -{ -return dld_link (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_dld_dld_link=yes -else - ac_cv_lib_dld_dld_link=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5 -$as_echo "$ac_cv_lib_dld_dld_link" >&6; } -if test "x$ac_cv_lib_dld_dld_link" = xyes; then : - lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld" -fi - - -fi - - -fi - - -fi - - -fi - - -fi - - ;; - esac - - if test "x$lt_cv_dlopen" != xno; then - enable_dlopen=yes - else - enable_dlopen=no - fi - - case $lt_cv_dlopen in - dlopen) - save_CPPFLAGS="$CPPFLAGS" - test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" - - save_LDFLAGS="$LDFLAGS" - wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" - - save_LIBS="$LIBS" - LIBS="$lt_cv_dlopen_libs $LIBS" - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5 -$as_echo_n "checking whether a program can dlopen itself... " >&6; } -if ${lt_cv_dlopen_self+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test "$cross_compiling" = yes; then : - lt_cv_dlopen_self=cross -else - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext <<_LT_EOF -#line $LINENO "configure" -#include "confdefs.h" - -#if HAVE_DLFCN_H -#include -#endif - -#include - -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif - -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif - -/* When -fvisbility=hidden is used, assume the code has been annotated - correspondingly for the symbols needed. */ -#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) -int fnord () __attribute__((visibility("default"))); -#endif - -int fnord () { return 42; } -int main () -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; - - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else - { - if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - else puts (dlerror ()); - } - /* dlclose (self); */ - } - else - puts (dlerror ()); - - return status; -} -_LT_EOF - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 - (eval $ac_link) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) >&5 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; - x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; - x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;; - esac - else : - # compilation failed - lt_cv_dlopen_self=no - fi -fi -rm -fr conftest* - - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5 -$as_echo "$lt_cv_dlopen_self" >&6; } - - if test "x$lt_cv_dlopen_self" = xyes; then - wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5 -$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; } -if ${lt_cv_dlopen_self_static+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test "$cross_compiling" = yes; then : - lt_cv_dlopen_self_static=cross -else - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext <<_LT_EOF -#line $LINENO "configure" -#include "confdefs.h" - -#if HAVE_DLFCN_H -#include -#endif - -#include - -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif - -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif - -/* When -fvisbility=hidden is used, assume the code has been annotated - correspondingly for the symbols needed. */ -#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) -int fnord () __attribute__((visibility("default"))); -#endif - -int fnord () { return 42; } -int main () -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; - - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else - { - if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - else puts (dlerror ()); - } - /* dlclose (self); */ - } - else - puts (dlerror ()); - - return status; -} -_LT_EOF - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 - (eval $ac_link) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) >&5 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; - x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; - x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;; - esac - else : - # compilation failed - lt_cv_dlopen_self_static=no - fi -fi -rm -fr conftest* - - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5 -$as_echo "$lt_cv_dlopen_self_static" >&6; } - fi - - CPPFLAGS="$save_CPPFLAGS" - LDFLAGS="$save_LDFLAGS" - LIBS="$save_LIBS" - ;; - esac - - case $lt_cv_dlopen_self in - yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; - *) enable_dlopen_self=unknown ;; - esac - - case $lt_cv_dlopen_self_static in - yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; - *) enable_dlopen_self_static=unknown ;; - esac -fi - - - - - - - - - - - - - - - - - -striplib= -old_striplib= -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5 -$as_echo_n "checking whether stripping libraries is possible... " >&6; } -if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then - test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" - test -z "$striplib" && striplib="$STRIP --strip-unneeded" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } -else -# FIXME - insert some real tests, host_os isn't really good enough - case $host_os in - darwin*) - if test -n "$STRIP" ; then - striplib="$STRIP -x" - old_striplib="$STRIP -S" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - fi - ;; - *) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - ;; - esac -fi - - - - - - - - - - - - - # Report which library types will actually be built - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5 -$as_echo_n "checking if libtool supports shared libraries... " >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5 -$as_echo "$can_build_shared" >&6; } - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5 -$as_echo_n "checking whether to build shared libraries... " >&6; } - test "$can_build_shared" = "no" && enable_shared=no - - # On AIX, shared libraries and static libraries use the same namespace, and - # are all built from PIC. - case $host_os in - aix3*) - test "$enable_shared" = yes && enable_static=no - if test -n "$RANLIB"; then - archive_cmds="$archive_cmds~\$RANLIB \$lib" - postinstall_cmds='$RANLIB $lib' - fi - ;; - - aix[4-9]*) - if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then - test "$enable_shared" = yes && enable_static=no - fi - ;; - esac - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5 -$as_echo "$enable_shared" >&6; } - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5 -$as_echo_n "checking whether to build static libraries... " >&6; } - # Make sure either enable_shared or enable_static is yes. - test "$enable_shared" = yes || enable_static=yes - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5 -$as_echo "$enable_static" >&6; } - - - - -fi -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -CC="$lt_save_CC" - - - - - - - - - - - - - - - - ac_config_commands="$ac_config_commands libtool" - - - - -# Only expand once: - - - -# Select memory manager depending on user input. -# If no "-enable-maxmem", use jmemnobs -MEMORYMGR='jmemnobs' -MAXMEM="no" -# Check whether --enable-maxmem was given. -if test "${enable_maxmem+set}" = set; then : - enableval=$enable_maxmem; MAXMEM="$enableval" -fi - -if test "x$MAXMEM" = xyes; then - MAXMEM=1 -fi -if test "x$MAXMEM" != xno; then - if test -n "`echo $MAXMEM | sed 's/[0-9]//g'`"; then - as_fn_error $? "non-numeric argument to --enable-maxmem" "$LINENO" 5 - fi - DEFAULTMAXMEM=`expr $MAXMEM \* 1048576` - -cat >>confdefs.h <<_ACEOF -#define DEFAULT_MAX_MEM ${DEFAULTMAXMEM} -_ACEOF - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for 'tmpfile()'" >&5 -$as_echo_n "checking for 'tmpfile()'... " >&6; } - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -int -main () -{ - FILE * tfile = tmpfile(); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - MEMORYMGR='jmemansi' -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - MEMORYMGR='jmemname' - - # Test for the need to remove temporary files using a signal handler - # (for cjpeg/djpeg) - -$as_echo "#define NEED_SIGNAL_CATCHER 1" >>confdefs.h - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for 'mktemp()'" >&5 -$as_echo_n "checking for 'mktemp()'... " >&6; } - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - char fname[80]; mktemp(fname); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - -$as_echo "#define NO_MKTEMP 1" >>confdefs.h - -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi - - -# Extract the library version IDs from jpeglib.h. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking libjpeg version number" >&5 -$as_echo_n "checking libjpeg version number... " >&6; } -major=`sed -ne 's/^#define JPEG_LIB_VERSION_MAJOR *\([0-9][0-9]*\).*$/\1/p' $srcdir/jpeglib.h` -minor=`sed -ne 's/^#define JPEG_LIB_VERSION_MINOR *\([0-9][0-9]*\).*$/\1/p' $srcdir/jpeglib.h` -JPEG_LIB_VERSION=`expr $major + $minor`:0:$minor - -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $JPEG_LIB_VERSION" >&5 -$as_echo "$JPEG_LIB_VERSION" >&6; } - -ac_config_files="$ac_config_files Makefile" - -cat >confcache <<\_ACEOF -# This file is a shell script that caches the results of configure -# tests run on this system so they can be shared between configure -# scripts and configure runs, see configure's option --config-cache. -# It is not useful on other systems. If it contains results you don't -# want to keep, you may remove or edit it. -# -# config.status only pays attention to the cache file if you give it -# the --recheck option to rerun configure. -# -# `ac_cv_env_foo' variables (set or unset) will be overridden when -# loading this file, other *unset* `ac_cv_foo' will be assigned the -# following values. - -_ACEOF - -# The following way of writing the cache mishandles newlines in values, -# but we know of no workaround that is simple, portable, and efficient. -# So, we kill variables containing newlines. -# Ultrix sh set writes to stderr and can't be redirected directly, -# and sets the high bit in the cache file unless we assign to the vars. -( - for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do - eval ac_val=\$$ac_var - case $ac_val in #( - *${as_nl}*) - case $ac_var in #( - *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 -$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; - esac - case $ac_var in #( - _ | IFS | as_nl) ;; #( - BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( - *) { eval $ac_var=; unset $ac_var;} ;; - esac ;; - esac - done - - (set) 2>&1 | - case $as_nl`(ac_space=' '; set) 2>&1` in #( - *${as_nl}ac_space=\ *) - # `set' does not quote correctly, so add quotes: double-quote - # substitution turns \\\\ into \\, and sed turns \\ into \. - sed -n \ - "s/'/'\\\\''/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" - ;; #( - *) - # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" - ;; - esac | - sort -) | - sed ' - /^ac_cv_env_/b end - t clear - :clear - s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ - t end - s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ - :end' >>confcache -if diff "$cache_file" confcache >/dev/null 2>&1; then :; else - if test -w "$cache_file"; then - if test "x$cache_file" != "x/dev/null"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 -$as_echo "$as_me: updating cache $cache_file" >&6;} - if test ! -f "$cache_file" || test -h "$cache_file"; then - cat confcache >"$cache_file" - else - case $cache_file in #( - */* | ?:*) - mv -f confcache "$cache_file"$$ && - mv -f "$cache_file"$$ "$cache_file" ;; #( - *) - mv -f confcache "$cache_file" ;; - esac - fi - fi - else - { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 -$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} - fi -fi -rm -f confcache - -test "x$prefix" = xNONE && prefix=$ac_default_prefix -# Let make expand exec_prefix. -test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' - -DEFS=-DHAVE_CONFIG_H - -ac_libobjs= -ac_ltlibobjs= -for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue - # 1. Remove the extension, and $U if already installed. - ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' - ac_i=`$as_echo "$ac_i" | sed "$ac_script"` - # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR - # will be set to the directory where LIBOBJS objects are built. - as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" - as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' -done -LIBOBJS=$ac_libobjs - -LTLIBOBJS=$ac_ltlibobjs - - - if test -n "$EXEEXT"; then - am__EXEEXT_TRUE= - am__EXEEXT_FALSE='#' -else - am__EXEEXT_TRUE='#' - am__EXEEXT_FALSE= -fi - -if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then - as_fn_error $? "conditional \"AMDEP\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then - as_fn_error $? "conditional \"am__fastdepCC\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then - as_fn_error $? "conditional \"MAINTAINER_MODE\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then - as_fn_error $? "conditional \"am__fastdepCC\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${HAVE_LD_VERSION_SCRIPT_TRUE}" && test -z "${HAVE_LD_VERSION_SCRIPT_FALSE}"; then - as_fn_error $? "conditional \"HAVE_LD_VERSION_SCRIPT\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi - -: "${CONFIG_STATUS=./config.status}" -ac_write_fail=0 -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files $CONFIG_STATUS" -{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 -$as_echo "$as_me: creating $CONFIG_STATUS" >&6;} -as_write_fail=0 -cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 -#! $SHELL -# Generated by $as_me. -# Run this file to recreate the current configuration. -# Compiler output produced by configure, useful for debugging -# configure, is in config.log if it exists. - -debug=false -ac_cs_recheck=false -ac_cs_silent=false - -SHELL=\${CONFIG_SHELL-$SHELL} -export SHELL -_ASEOF -cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 -## -------------------- ## -## M4sh Initialization. ## -## -------------------- ## - -# Be more Bourne compatible -DUALCASE=1; export DUALCASE # for MKS sh -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in #( - *posix*) : - set -o posix ;; #( - *) : - ;; -esac -fi - - -as_nl=' -' -export as_nl -# Printing a long string crashes Solaris 7 /usr/bin/printf. -as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo -# Prefer a ksh shell builtin over an external printf program on Solaris, -# but without wasting forks for bash or zsh. -if test -z "$BASH_VERSION$ZSH_VERSION" \ - && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='print -r --' - as_echo_n='print -rn --' -elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='printf %s\n' - as_echo_n='printf %s' -else - if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then - as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' - as_echo_n='/usr/ucb/echo -n' - else - as_echo_body='eval expr "X$1" : "X\\(.*\\)"' - as_echo_n_body='eval - arg=$1; - case $arg in #( - *"$as_nl"*) - expr "X$arg" : "X\\(.*\\)$as_nl"; - arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; - esac; - expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" - ' - export as_echo_n_body - as_echo_n='sh -c $as_echo_n_body as_echo' - fi - export as_echo_body - as_echo='sh -c $as_echo_body as_echo' -fi - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - PATH_SEPARATOR=: - (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { - (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || - PATH_SEPARATOR=';' - } -fi - - -# IFS -# We need space, tab and new line, in precisely that order. Quoting is -# there to prevent editors from complaining about space-tab. -# (If _AS_PATH_WALK were called with IFS unset, it would disable word -# splitting by setting IFS to empty value.) -IFS=" "" $as_nl" - -# Find who we are. Look in the path if we contain no directory separator. -as_myself= -case $0 in #(( - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break - done -IFS=$as_save_IFS - - ;; -esac -# We did not find ourselves, most probably we were run as `sh COMMAND' -# in which case we are not to be found in the path. -if test "x$as_myself" = x; then - as_myself=$0 -fi -if test ! -f "$as_myself"; then - $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 - exit 1 -fi - -# Unset variables that we do not need and which cause bugs (e.g. in -# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" -# suppresses any "Segmentation fault" message there. '((' could -# trigger a bug in pdksh 5.2.14. -for as_var in BASH_ENV ENV MAIL MAILPATH -do eval test x\${$as_var+set} = xset \ - && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : -done -PS1='$ ' -PS2='> ' -PS4='+ ' - -# NLS nuisances. -LC_ALL=C -export LC_ALL -LANGUAGE=C -export LANGUAGE - -# CDPATH. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - - -# as_fn_error STATUS ERROR [LINENO LOG_FD] -# ---------------------------------------- -# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are -# provided, also output the error to LOG_FD, referencing LINENO. Then exit the -# script with STATUS, using 1 if that was 0. -as_fn_error () -{ - as_status=$1; test $as_status -eq 0 && as_status=1 - if test "$4"; then - as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 - fi - $as_echo "$as_me: error: $2" >&2 - as_fn_exit $as_status -} # as_fn_error - - -# as_fn_set_status STATUS -# ----------------------- -# Set $? to STATUS, without forking. -as_fn_set_status () -{ - return $1 -} # as_fn_set_status - -# as_fn_exit STATUS -# ----------------- -# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. -as_fn_exit () -{ - set +e - as_fn_set_status $1 - exit $1 -} # as_fn_exit - -# as_fn_unset VAR -# --------------- -# Portably unset VAR. -as_fn_unset () -{ - { eval $1=; unset $1;} -} -as_unset=as_fn_unset -# as_fn_append VAR VALUE -# ---------------------- -# Append the text in VALUE to the end of the definition contained in VAR. Take -# advantage of any shell optimizations that allow amortized linear growth over -# repeated appends, instead of the typical quadratic growth present in naive -# implementations. -if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : - eval 'as_fn_append () - { - eval $1+=\$2 - }' -else - as_fn_append () - { - eval $1=\$$1\$2 - } -fi # as_fn_append - -# as_fn_arith ARG... -# ------------------ -# Perform arithmetic evaluation on the ARGs, and store the result in the -# global $as_val. Take advantage of shells that can avoid forks. The arguments -# must be portable across $(()) and expr. -if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : - eval 'as_fn_arith () - { - as_val=$(( $* )) - }' -else - as_fn_arith () - { - as_val=`expr "$@" || test $? -eq 1` - } -fi # as_fn_arith - - -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi - -if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi - -if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then - as_dirname=dirname -else - as_dirname=false -fi - -as_me=`$as_basename -- "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ - s//\1/ - q - } - /^X\/\(\/\/\)$/{ - s//\1/ - q - } - /^X\/\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - -ECHO_C= ECHO_N= ECHO_T= -case `echo -n x` in #((((( --n*) - case `echo 'xy\c'` in - *c*) ECHO_T=' ';; # ECHO_T is single tab character. - xy) ECHO_C='\c';; - *) echo `echo ksh88 bug on AIX 6.1` > /dev/null - ECHO_T=' ';; - esac;; -*) - ECHO_N='-n';; -esac - -rm -f conf$$ conf$$.exe conf$$.file -if test -d conf$$.dir; then - rm -f conf$$.dir/conf$$.file -else - rm -f conf$$.dir - mkdir conf$$.dir 2>/dev/null -fi -if (echo >conf$$.file) 2>/dev/null; then - if ln -s conf$$.file conf$$ 2>/dev/null; then - as_ln_s='ln -s' - # ... but there are two gotchas: - # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. - # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. - # In both cases, we have to default to `cp -p'. - ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || - as_ln_s='cp -p' - elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln - else - as_ln_s='cp -p' - fi -else - as_ln_s='cp -p' -fi -rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file -rmdir conf$$.dir 2>/dev/null - - -# as_fn_mkdir_p -# ------------- -# Create "$as_dir" as a directory, including parents if necessary. -as_fn_mkdir_p () -{ - - case $as_dir in #( - -*) as_dir=./$as_dir;; - esac - test -d "$as_dir" || eval $as_mkdir_p || { - as_dirs= - while :; do - case $as_dir in #( - *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( - *) as_qdir=$as_dir;; - esac - as_dirs="'$as_qdir' $as_dirs" - as_dir=`$as_dirname -- "$as_dir" || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - test -d "$as_dir" && break - done - test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" - - -} # as_fn_mkdir_p -if mkdir -p . 2>/dev/null; then - as_mkdir_p='mkdir -p "$as_dir"' -else - test -d ./-p && rmdir ./-p - as_mkdir_p=false -fi - -if test -x / >/dev/null 2>&1; then - as_test_x='test -x' -else - if ls -dL / >/dev/null 2>&1; then - as_ls_L_option=L - else - as_ls_L_option= - fi - as_test_x=' - eval sh -c '\'' - if test -d "$1"; then - test -d "$1/."; - else - case $1 in #( - -*)set "./$1";; - esac; - case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #(( - ???[sx]*):;;*)false;;esac;fi - '\'' sh - ' -fi -as_executable_p=$as_test_x - -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" - -# Sed expression to map a string onto a valid variable name. -as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - - -exec 6>&1 -## ----------------------------------- ## -## Main body of $CONFIG_STATUS script. ## -## ----------------------------------- ## -_ASEOF -test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# Save the log message, to keep $0 and so on meaningful, and to -# report actual input values of CONFIG_FILES etc. instead of their -# values after options handling. -ac_log=" -This file was extended by libjpeg $as_me 8.4.0, which was -generated by GNU Autoconf 2.68. Invocation command line was - - CONFIG_FILES = $CONFIG_FILES - CONFIG_HEADERS = $CONFIG_HEADERS - CONFIG_LINKS = $CONFIG_LINKS - CONFIG_COMMANDS = $CONFIG_COMMANDS - $ $0 $@ - -on `(hostname || uname -n) 2>/dev/null | sed 1q` -" - -_ACEOF - -case $ac_config_files in *" -"*) set x $ac_config_files; shift; ac_config_files=$*;; -esac - -case $ac_config_headers in *" -"*) set x $ac_config_headers; shift; ac_config_headers=$*;; -esac - - -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -# Files that config.status was made for. -config_files="$ac_config_files" -config_headers="$ac_config_headers" -config_commands="$ac_config_commands" - -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -ac_cs_usage="\ -\`$as_me' instantiates files and other configuration actions -from templates according to the current configuration. Unless the files -and actions are specified as TAGs, all are instantiated by default. - -Usage: $0 [OPTION]... [TAG]... - - -h, --help print this help, then exit - -V, --version print version number and configuration settings, then exit - --config print configuration, then exit - -q, --quiet, --silent - do not print progress messages - -d, --debug don't remove temporary files - --recheck update $as_me by reconfiguring in the same conditions - --file=FILE[:TEMPLATE] - instantiate the configuration file FILE - --header=FILE[:TEMPLATE] - instantiate the configuration header FILE - -Configuration files: -$config_files - -Configuration headers: -$config_headers - -Configuration commands: -$config_commands - -Report bugs to the package provider." - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" -ac_cs_version="\\ -libjpeg config.status 8.4.0 -configured by $0, generated by GNU Autoconf 2.68, - with options \\"\$ac_cs_config\\" - -Copyright (C) 2010 Free Software Foundation, Inc. -This config.status script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it." - -ac_pwd='$ac_pwd' -srcdir='$srcdir' -INSTALL='$INSTALL' -MKDIR_P='$MKDIR_P' -AWK='$AWK' -test -n "\$AWK" || AWK=awk -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# The default lists apply if the user does not specify any file. -ac_need_defaults=: -while test $# != 0 -do - case $1 in - --*=?*) - ac_option=`expr "X$1" : 'X\([^=]*\)='` - ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` - ac_shift=: - ;; - --*=) - ac_option=`expr "X$1" : 'X\([^=]*\)='` - ac_optarg= - ac_shift=: - ;; - *) - ac_option=$1 - ac_optarg=$2 - ac_shift=shift - ;; - esac - - case $ac_option in - # Handling of the options. - -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) - ac_cs_recheck=: ;; - --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) - $as_echo "$ac_cs_version"; exit ;; - --config | --confi | --conf | --con | --co | --c ) - $as_echo "$ac_cs_config"; exit ;; - --debug | --debu | --deb | --de | --d | -d ) - debug=: ;; - --file | --fil | --fi | --f ) - $ac_shift - case $ac_optarg in - *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; - '') as_fn_error $? "missing file argument" ;; - esac - as_fn_append CONFIG_FILES " '$ac_optarg'" - ac_need_defaults=false;; - --header | --heade | --head | --hea ) - $ac_shift - case $ac_optarg in - *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - as_fn_append CONFIG_HEADERS " '$ac_optarg'" - ac_need_defaults=false;; - --he | --h) - # Conflict between --help and --header - as_fn_error $? "ambiguous option: \`$1' -Try \`$0 --help' for more information.";; - --help | --hel | -h ) - $as_echo "$ac_cs_usage"; exit ;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil | --si | --s) - ac_cs_silent=: ;; - - # This is an error. - -*) as_fn_error $? "unrecognized option: \`$1' -Try \`$0 --help' for more information." ;; - - *) as_fn_append ac_config_targets " $1" - ac_need_defaults=false ;; - - esac - shift -done - -ac_configure_extra_args= - -if $ac_cs_silent; then - exec 6>/dev/null - ac_configure_extra_args="$ac_configure_extra_args --silent" -fi - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -if \$ac_cs_recheck; then - set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion - shift - \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 - CONFIG_SHELL='$SHELL' - export CONFIG_SHELL - exec "\$@" -fi - -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -exec 5>>config.log -{ - echo - sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX -## Running $as_me. ## -_ASBOX - $as_echo "$ac_log" -} >&5 - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -# -# INIT-COMMANDS -# -AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" - - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -sed_quote_subst='$sed_quote_subst' -double_quote_subst='$double_quote_subst' -delay_variable_subst='$delay_variable_subst' -AS='`$ECHO "$AS" | $SED "$delay_single_quote_subst"`' -DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`' -OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`' -macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`' -macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`' -enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`' -enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`' -pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`' -enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`' -SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`' -ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`' -PATH_SEPARATOR='`$ECHO "$PATH_SEPARATOR" | $SED "$delay_single_quote_subst"`' -host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`' -host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`' -host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`' -build_alias='`$ECHO "$build_alias" | $SED "$delay_single_quote_subst"`' -build='`$ECHO "$build" | $SED "$delay_single_quote_subst"`' -build_os='`$ECHO "$build_os" | $SED "$delay_single_quote_subst"`' -SED='`$ECHO "$SED" | $SED "$delay_single_quote_subst"`' -Xsed='`$ECHO "$Xsed" | $SED "$delay_single_quote_subst"`' -GREP='`$ECHO "$GREP" | $SED "$delay_single_quote_subst"`' -EGREP='`$ECHO "$EGREP" | $SED "$delay_single_quote_subst"`' -FGREP='`$ECHO "$FGREP" | $SED "$delay_single_quote_subst"`' -LD='`$ECHO "$LD" | $SED "$delay_single_quote_subst"`' -NM='`$ECHO "$NM" | $SED "$delay_single_quote_subst"`' -LN_S='`$ECHO "$LN_S" | $SED "$delay_single_quote_subst"`' -max_cmd_len='`$ECHO "$max_cmd_len" | $SED "$delay_single_quote_subst"`' -ac_objext='`$ECHO "$ac_objext" | $SED "$delay_single_quote_subst"`' -exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`' -lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`' -lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`' -lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`' -lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`' -lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`' -reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`' -reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`' -deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`' -file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`' -file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`' -want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`' -sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`' -AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`' -AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`' -archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`' -STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`' -RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`' -old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`' -old_postuninstall_cmds='`$ECHO "$old_postuninstall_cmds" | $SED "$delay_single_quote_subst"`' -old_archive_cmds='`$ECHO "$old_archive_cmds" | $SED "$delay_single_quote_subst"`' -lock_old_archive_extraction='`$ECHO "$lock_old_archive_extraction" | $SED "$delay_single_quote_subst"`' -CC='`$ECHO "$CC" | $SED "$delay_single_quote_subst"`' -CFLAGS='`$ECHO "$CFLAGS" | $SED "$delay_single_quote_subst"`' -compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`' -GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`' -lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`' -lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`' -lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`' -lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`' -nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`' -lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`' -objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`' -MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`' -lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`' -lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`' -lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`' -lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`' -lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`' -need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`' -MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`' -DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`' -NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`' -LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`' -OTOOL='`$ECHO "$OTOOL" | $SED "$delay_single_quote_subst"`' -OTOOL64='`$ECHO "$OTOOL64" | $SED "$delay_single_quote_subst"`' -libext='`$ECHO "$libext" | $SED "$delay_single_quote_subst"`' -shrext_cmds='`$ECHO "$shrext_cmds" | $SED "$delay_single_quote_subst"`' -extract_expsyms_cmds='`$ECHO "$extract_expsyms_cmds" | $SED "$delay_single_quote_subst"`' -archive_cmds_need_lc='`$ECHO "$archive_cmds_need_lc" | $SED "$delay_single_quote_subst"`' -enable_shared_with_static_runtimes='`$ECHO "$enable_shared_with_static_runtimes" | $SED "$delay_single_quote_subst"`' -export_dynamic_flag_spec='`$ECHO "$export_dynamic_flag_spec" | $SED "$delay_single_quote_subst"`' -whole_archive_flag_spec='`$ECHO "$whole_archive_flag_spec" | $SED "$delay_single_quote_subst"`' -compiler_needs_object='`$ECHO "$compiler_needs_object" | $SED "$delay_single_quote_subst"`' -old_archive_from_new_cmds='`$ECHO "$old_archive_from_new_cmds" | $SED "$delay_single_quote_subst"`' -old_archive_from_expsyms_cmds='`$ECHO "$old_archive_from_expsyms_cmds" | $SED "$delay_single_quote_subst"`' -archive_cmds='`$ECHO "$archive_cmds" | $SED "$delay_single_quote_subst"`' -archive_expsym_cmds='`$ECHO "$archive_expsym_cmds" | $SED "$delay_single_quote_subst"`' -module_cmds='`$ECHO "$module_cmds" | $SED "$delay_single_quote_subst"`' -module_expsym_cmds='`$ECHO "$module_expsym_cmds" | $SED "$delay_single_quote_subst"`' -with_gnu_ld='`$ECHO "$with_gnu_ld" | $SED "$delay_single_quote_subst"`' -allow_undefined_flag='`$ECHO "$allow_undefined_flag" | $SED "$delay_single_quote_subst"`' -no_undefined_flag='`$ECHO "$no_undefined_flag" | $SED "$delay_single_quote_subst"`' -hardcode_libdir_flag_spec='`$ECHO "$hardcode_libdir_flag_spec" | $SED "$delay_single_quote_subst"`' -hardcode_libdir_separator='`$ECHO "$hardcode_libdir_separator" | $SED "$delay_single_quote_subst"`' -hardcode_direct='`$ECHO "$hardcode_direct" | $SED "$delay_single_quote_subst"`' -hardcode_direct_absolute='`$ECHO "$hardcode_direct_absolute" | $SED "$delay_single_quote_subst"`' -hardcode_minus_L='`$ECHO "$hardcode_minus_L" | $SED "$delay_single_quote_subst"`' -hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_quote_subst"`' -hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`' -inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`' -link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`' -always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`' -export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`' -exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`' -include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`' -prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`' -postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`' -file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`' -variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`' -need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`' -need_version='`$ECHO "$need_version" | $SED "$delay_single_quote_subst"`' -version_type='`$ECHO "$version_type" | $SED "$delay_single_quote_subst"`' -runpath_var='`$ECHO "$runpath_var" | $SED "$delay_single_quote_subst"`' -shlibpath_var='`$ECHO "$shlibpath_var" | $SED "$delay_single_quote_subst"`' -shlibpath_overrides_runpath='`$ECHO "$shlibpath_overrides_runpath" | $SED "$delay_single_quote_subst"`' -libname_spec='`$ECHO "$libname_spec" | $SED "$delay_single_quote_subst"`' -library_names_spec='`$ECHO "$library_names_spec" | $SED "$delay_single_quote_subst"`' -soname_spec='`$ECHO "$soname_spec" | $SED "$delay_single_quote_subst"`' -install_override_mode='`$ECHO "$install_override_mode" | $SED "$delay_single_quote_subst"`' -postinstall_cmds='`$ECHO "$postinstall_cmds" | $SED "$delay_single_quote_subst"`' -postuninstall_cmds='`$ECHO "$postuninstall_cmds" | $SED "$delay_single_quote_subst"`' -finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`' -finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`' -hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`' -sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`' -sys_lib_dlsearch_path_spec='`$ECHO "$sys_lib_dlsearch_path_spec" | $SED "$delay_single_quote_subst"`' -hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`' -enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`' -enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`' -enable_dlopen_self_static='`$ECHO "$enable_dlopen_self_static" | $SED "$delay_single_quote_subst"`' -old_striplib='`$ECHO "$old_striplib" | $SED "$delay_single_quote_subst"`' -striplib='`$ECHO "$striplib" | $SED "$delay_single_quote_subst"`' - -LTCC='$LTCC' -LTCFLAGS='$LTCFLAGS' -compiler='$compiler_DEFAULT' - -# A function that is used when there is no print builtin or printf. -func_fallback_echo () -{ - eval 'cat <<_LTECHO_EOF -\$1 -_LTECHO_EOF' -} - -# Quote evaled strings. -for var in AS \ -DLLTOOL \ -OBJDUMP \ -SHELL \ -ECHO \ -PATH_SEPARATOR \ -SED \ -GREP \ -EGREP \ -FGREP \ -LD \ -NM \ -LN_S \ -lt_SP2NL \ -lt_NL2SP \ -reload_flag \ -deplibs_check_method \ -file_magic_cmd \ -file_magic_glob \ -want_nocaseglob \ -sharedlib_from_linklib_cmd \ -AR \ -AR_FLAGS \ -archiver_list_spec \ -STRIP \ -RANLIB \ -CC \ -CFLAGS \ -compiler \ -lt_cv_sys_global_symbol_pipe \ -lt_cv_sys_global_symbol_to_cdecl \ -lt_cv_sys_global_symbol_to_c_name_address \ -lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \ -nm_file_list_spec \ -lt_prog_compiler_no_builtin_flag \ -lt_prog_compiler_pic \ -lt_prog_compiler_wl \ -lt_prog_compiler_static \ -lt_cv_prog_compiler_c_o \ -need_locks \ -MANIFEST_TOOL \ -DSYMUTIL \ -NMEDIT \ -LIPO \ -OTOOL \ -OTOOL64 \ -shrext_cmds \ -export_dynamic_flag_spec \ -whole_archive_flag_spec \ -compiler_needs_object \ -with_gnu_ld \ -allow_undefined_flag \ -no_undefined_flag \ -hardcode_libdir_flag_spec \ -hardcode_libdir_separator \ -exclude_expsyms \ -include_expsyms \ -file_list_spec \ -variables_saved_for_relink \ -libname_spec \ -library_names_spec \ -soname_spec \ -install_override_mode \ -finish_eval \ -old_striplib \ -striplib; do - case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in - *[\\\\\\\`\\"\\\$]*) - eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" - ;; - *) - eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" - ;; - esac -done - -# Double-quote double-evaled strings. -for var in reload_cmds \ -old_postinstall_cmds \ -old_postuninstall_cmds \ -old_archive_cmds \ -extract_expsyms_cmds \ -old_archive_from_new_cmds \ -old_archive_from_expsyms_cmds \ -archive_cmds \ -archive_expsym_cmds \ -module_cmds \ -module_expsym_cmds \ -export_symbols_cmds \ -prelink_cmds \ -postlink_cmds \ -postinstall_cmds \ -postuninstall_cmds \ -finish_cmds \ -sys_lib_search_path_spec \ -sys_lib_dlsearch_path_spec; do - case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in - *[\\\\\\\`\\"\\\$]*) - eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" - ;; - *) - eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" - ;; - esac -done - -ac_aux_dir='$ac_aux_dir' -xsi_shell='$xsi_shell' -lt_shell_append='$lt_shell_append' - -# See if we are running on zsh, and set the options which allow our -# commands through without removal of \ escapes INIT. -if test -n "\${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST -fi - - - PACKAGE='$PACKAGE' - VERSION='$VERSION' - TIMESTAMP='$TIMESTAMP' - RM='$RM' - ofile='$ofile' - - - - -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 - -# Handling of arguments. -for ac_config_target in $ac_config_targets -do - case $ac_config_target in - "jconfig.h") CONFIG_HEADERS="$CONFIG_HEADERS jconfig.h:jconfig.cfg" ;; - "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; - "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;; - "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; - - *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; - esac -done - - -# If the user did not use the arguments to specify the items to instantiate, -# then the envvar interface is used. Set only those that are not. -# We use the long form for the default assignment because of an extremely -# bizarre bug on SunOS 4.1.3. -if $ac_need_defaults; then - test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files - test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers - test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands -fi - -# Have a temporary directory for convenience. Make it in the build tree -# simply because there is no reason against having it here, and in addition, -# creating and moving files from /tmp can sometimes cause problems. -# Hook for its removal unless debugging. -# Note that there is a small window in which the directory will not be cleaned: -# after its creation but before its name has been assigned to `$tmp'. -$debug || -{ - tmp= ac_tmp= - trap 'exit_status=$? - : "${ac_tmp:=$tmp}" - { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status -' 0 - trap 'as_fn_exit 1' 1 2 13 15 -} -# Create a (secure) tmp directory for tmp files. - -{ - tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && - test -d "$tmp" -} || -{ - tmp=./conf$$-$RANDOM - (umask 077 && mkdir "$tmp") -} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 -ac_tmp=$tmp - -# Set up the scripts for CONFIG_FILES section. -# No need to generate them if there are no CONFIG_FILES. -# This happens for instance with `./config.status config.h'. -if test -n "$CONFIG_FILES"; then - - -ac_cr=`echo X | tr X '\015'` -# On cygwin, bash can eat \r inside `` if the user requested igncr. -# But we know of no other shell where ac_cr would be empty at this -# point, so we can use a bashism as a fallback. -if test "x$ac_cr" = x; then - eval ac_cr=\$\'\\r\' -fi -ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` -if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then - ac_cs_awk_cr='\\r' -else - ac_cs_awk_cr=$ac_cr -fi - -echo 'BEGIN {' >"$ac_tmp/subs1.awk" && -_ACEOF - - -{ - echo "cat >conf$$subs.awk <<_ACEOF" && - echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && - echo "_ACEOF" -} >conf$$subs.sh || - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 -ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` -ac_delim='%!_!# ' -for ac_last_try in false false false false false :; do - . ./conf$$subs.sh || - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 - - ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` - if test $ac_delim_n = $ac_delim_num; then - break - elif $ac_last_try; then - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 - else - ac_delim="$ac_delim!$ac_delim _$ac_delim!! " - fi -done -rm -f conf$$subs.sh - -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK && -_ACEOF -sed -n ' -h -s/^/S["/; s/!.*/"]=/ -p -g -s/^[^!]*!// -:repl -t repl -s/'"$ac_delim"'$// -t delim -:nl -h -s/\(.\{148\}\)..*/\1/ -t more1 -s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ -p -n -b repl -:more1 -s/["\\]/\\&/g; s/^/"/; s/$/"\\/ -p -g -s/.\{148\}// -t nl -:delim -h -s/\(.\{148\}\)..*/\1/ -t more2 -s/["\\]/\\&/g; s/^/"/; s/$/"/ -p -b -:more2 -s/["\\]/\\&/g; s/^/"/; s/$/"\\/ -p -g -s/.\{148\}// -t delim -' >$CONFIG_STATUS || ac_write_fail=1 -rm -f conf$$subs.awk -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -_ACAWK -cat >>"\$ac_tmp/subs1.awk" <<_ACAWK && - for (key in S) S_is_set[key] = 1 - FS = "" - -} -{ - line = $ 0 - nfields = split(line, field, "@") - substed = 0 - len = length(field[1]) - for (i = 2; i < nfields; i++) { - key = field[i] - keylen = length(key) - if (S_is_set[key]) { - value = S[key] - line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) - len += length(value) + length(field[++i]) - substed = 1 - } else - len += 1 + keylen - } - - print line -} - -_ACAWK -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then - sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" -else - cat -fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ - || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 -_ACEOF - -# VPATH may cause trouble with some makes, so we remove sole $(srcdir), -# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and -# trailing colons and then remove the whole line if VPATH becomes empty -# (actually we leave an empty line to preserve line numbers). -if test "x$srcdir" = x.; then - ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ -h -s/// -s/^/:/ -s/[ ]*$/:/ -s/:\$(srcdir):/:/g -s/:\${srcdir}:/:/g -s/:@srcdir@:/:/g -s/^:*// -s/:*$// -x -s/\(=[ ]*\).*/\1/ -G -s/\n// -s/^[^=]*=[ ]*$// -}' -fi - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -fi # test -n "$CONFIG_FILES" - -# Set up the scripts for CONFIG_HEADERS section. -# No need to generate them if there are no CONFIG_HEADERS. -# This happens for instance with `./config.status Makefile'. -if test -n "$CONFIG_HEADERS"; then -cat >"$ac_tmp/defines.awk" <<\_ACAWK || -BEGIN { -_ACEOF - -# Transform confdefs.h into an awk script `defines.awk', embedded as -# here-document in config.status, that substitutes the proper values into -# config.h.in to produce config.h. - -# Create a delimiter string that does not exist in confdefs.h, to ease -# handling of long lines. -ac_delim='%!_!# ' -for ac_last_try in false false :; do - ac_tt=`sed -n "/$ac_delim/p" confdefs.h` - if test -z "$ac_tt"; then - break - elif $ac_last_try; then - as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5 - else - ac_delim="$ac_delim!$ac_delim _$ac_delim!! " - fi -done - -# For the awk script, D is an array of macro values keyed by name, -# likewise P contains macro parameters if any. Preserve backslash -# newline sequences. - -ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* -sed -n ' -s/.\{148\}/&'"$ac_delim"'/g -t rset -:rset -s/^[ ]*#[ ]*define[ ][ ]*/ / -t def -d -:def -s/\\$// -t bsnl -s/["\\]/\\&/g -s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ -D["\1"]=" \3"/p -s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p -d -:bsnl -s/["\\]/\\&/g -s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ -D["\1"]=" \3\\\\\\n"\\/p -t cont -s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p -t cont -d -:cont -n -s/.\{148\}/&'"$ac_delim"'/g -t clear -:clear -s/\\$// -t bsnlc -s/["\\]/\\&/g; s/^/"/; s/$/"/p -d -:bsnlc -s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p -b cont -' >$CONFIG_STATUS || ac_write_fail=1 - -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 - for (key in D) D_is_set[key] = 1 - FS = "" -} -/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { - line = \$ 0 - split(line, arg, " ") - if (arg[1] == "#") { - defundef = arg[2] - mac1 = arg[3] - } else { - defundef = substr(arg[1], 2) - mac1 = arg[2] - } - split(mac1, mac2, "(") #) - macro = mac2[1] - prefix = substr(line, 1, index(line, defundef) - 1) - if (D_is_set[macro]) { - # Preserve the white space surrounding the "#". - print prefix "define", macro P[macro] D[macro] - next - } else { - # Replace #undef with comments. This is necessary, for example, - # in the case of _POSIX_SOURCE, which is predefined and required - # on some systems where configure will not decide to define it. - if (defundef == "undef") { - print "/*", prefix defundef, macro, "*/" - next - } - } -} -{ print } -_ACAWK -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 - as_fn_error $? "could not setup config headers machinery" "$LINENO" 5 -fi # test -n "$CONFIG_HEADERS" - - -eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" -shift -for ac_tag -do - case $ac_tag in - :[FHLC]) ac_mode=$ac_tag; continue;; - esac - case $ac_mode$ac_tag in - :[FHL]*:*);; - :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; - :[FH]-) ac_tag=-:-;; - :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; - esac - ac_save_IFS=$IFS - IFS=: - set x $ac_tag - IFS=$ac_save_IFS - shift - ac_file=$1 - shift - - case $ac_mode in - :L) ac_source=$1;; - :[FH]) - ac_file_inputs= - for ac_f - do - case $ac_f in - -) ac_f="$ac_tmp/stdin";; - *) # Look for the file first in the build tree, then in the source tree - # (if the path is not absolute). The absolute path cannot be DOS-style, - # because $ac_f cannot contain `:'. - test -f "$ac_f" || - case $ac_f in - [\\/$]*) false;; - *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; - esac || - as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; - esac - case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac - as_fn_append ac_file_inputs " '$ac_f'" - done - - # Let's still pretend it is `configure' which instantiates (i.e., don't - # use $as_me), people would be surprised to read: - # /* config.h. Generated by config.status. */ - configure_input='Generated from '` - $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' - `' by configure.' - if test x"$ac_file" != x-; then - configure_input="$ac_file. $configure_input" - { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 -$as_echo "$as_me: creating $ac_file" >&6;} - fi - # Neutralize special characters interpreted by sed in replacement strings. - case $configure_input in #( - *\&* | *\|* | *\\* ) - ac_sed_conf_input=`$as_echo "$configure_input" | - sed 's/[\\\\&|]/\\\\&/g'`;; #( - *) ac_sed_conf_input=$configure_input;; - esac - - case $ac_tag in - *:-:* | *:-) cat >"$ac_tmp/stdin" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; - esac - ;; - esac - - ac_dir=`$as_dirname -- "$ac_file" || -$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$ac_file" : 'X\(//\)[^/]' \| \ - X"$ac_file" : 'X\(//\)$' \| \ - X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$ac_file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - as_dir="$ac_dir"; as_fn_mkdir_p - ac_builddir=. - -case "$ac_dir" in -.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; -*) - ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` - # A ".." for each directory in $ac_dir_suffix. - ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` - case $ac_top_builddir_sub in - "") ac_top_builddir_sub=. ac_top_build_prefix= ;; - *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; - esac ;; -esac -ac_abs_top_builddir=$ac_pwd -ac_abs_builddir=$ac_pwd$ac_dir_suffix -# for backward compatibility: -ac_top_builddir=$ac_top_build_prefix - -case $srcdir in - .) # We are building in place. - ac_srcdir=. - ac_top_srcdir=$ac_top_builddir_sub - ac_abs_top_srcdir=$ac_pwd ;; - [\\/]* | ?:[\\/]* ) # Absolute name. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir - ac_abs_top_srcdir=$srcdir ;; - *) # Relative name. - ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_build_prefix$srcdir - ac_abs_top_srcdir=$ac_pwd/$srcdir ;; -esac -ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix - - - case $ac_mode in - :F) - # - # CONFIG_FILE - # - - case $INSTALL in - [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; - *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; - esac - ac_MKDIR_P=$MKDIR_P - case $MKDIR_P in - [\\/$]* | ?:[\\/]* ) ;; - */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; - esac -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# If the template does not know about datarootdir, expand it. -# FIXME: This hack should be removed a few years after 2.60. -ac_datarootdir_hack=; ac_datarootdir_seen= -ac_sed_dataroot=' -/datarootdir/ { - p - q -} -/@datadir@/p -/@docdir@/p -/@infodir@/p -/@localedir@/p -/@mandir@/p' -case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in -*datarootdir*) ac_datarootdir_seen=yes;; -*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 -$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 - ac_datarootdir_hack=' - s&@datadir@&$datadir&g - s&@docdir@&$docdir&g - s&@infodir@&$infodir&g - s&@localedir@&$localedir&g - s&@mandir@&$mandir&g - s&\\\${datarootdir}&$datarootdir&g' ;; -esac -_ACEOF - -# Neutralize VPATH when `$srcdir' = `.'. -# Shell code in configure.ac might set extrasub. -# FIXME: do we really want to maintain this feature? -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -ac_sed_extra="$ac_vpsub -$extrasub -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -:t -/@[a-zA-Z_][a-zA-Z_0-9]*@/!b -s|@configure_input@|$ac_sed_conf_input|;t t -s&@top_builddir@&$ac_top_builddir_sub&;t t -s&@top_build_prefix@&$ac_top_build_prefix&;t t -s&@srcdir@&$ac_srcdir&;t t -s&@abs_srcdir@&$ac_abs_srcdir&;t t -s&@top_srcdir@&$ac_top_srcdir&;t t -s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t -s&@builddir@&$ac_builddir&;t t -s&@abs_builddir@&$ac_abs_builddir&;t t -s&@abs_top_builddir@&$ac_abs_top_builddir&;t t -s&@INSTALL@&$ac_INSTALL&;t t -s&@MKDIR_P@&$ac_MKDIR_P&;t t -$ac_datarootdir_hack -" -eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ - >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - -test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && - { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && - { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ - "$ac_tmp/out"`; test -z "$ac_out"; } && - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined" >&5 -$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined" >&2;} - - rm -f "$ac_tmp/stdin" - case $ac_file in - -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; - *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; - esac \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - ;; - :H) - # - # CONFIG_HEADER - # - if test x"$ac_file" != x-; then - { - $as_echo "/* $configure_input */" \ - && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" - } >"$ac_tmp/config.h" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then - { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 -$as_echo "$as_me: $ac_file is unchanged" >&6;} - else - rm -f "$ac_file" - mv "$ac_tmp/config.h" "$ac_file" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - fi - else - $as_echo "/* $configure_input */" \ - && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \ - || as_fn_error $? "could not create -" "$LINENO" 5 - fi -# Compute "$ac_file"'s index in $config_headers. -_am_arg="$ac_file" -_am_stamp_count=1 -for _am_header in $config_headers :; do - case $_am_header in - $_am_arg | $_am_arg:* ) - break ;; - * ) - _am_stamp_count=`expr $_am_stamp_count + 1` ;; - esac -done -echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || -$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$_am_arg" : 'X\(//\)[^/]' \| \ - X"$_am_arg" : 'X\(//\)$' \| \ - X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$_am_arg" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'`/stamp-h$_am_stamp_count - ;; - - :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5 -$as_echo "$as_me: executing $ac_file commands" >&6;} - ;; - esac - - - case $ac_file$ac_mode in - "depfiles":C) test x"$AMDEP_TRUE" != x"" || { - # Autoconf 2.62 quotes --file arguments for eval, but not when files - # are listed without --file. Let's play safe and only enable the eval - # if we detect the quoting. - case $CONFIG_FILES in - *\'*) eval set x "$CONFIG_FILES" ;; - *) set x $CONFIG_FILES ;; - esac - shift - for mf - do - # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named `Makefile.in', but - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. - # Grep'ing the whole file is not good either: AIX grep has a line - # limit of 2048, but all sed's we know have understand at least 4000. - if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then - dirpart=`$as_dirname -- "$mf" || -$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$mf" : 'X\(//\)[^/]' \| \ - X"$mf" : 'X\(//\)$' \| \ - X"$mf" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$mf" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - else - continue - fi - # Extract the definition of DEPDIR, am__include, and am__quote - # from the Makefile without running `make'. - DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` - test -z "$DEPDIR" && continue - am__include=`sed -n 's/^am__include = //p' < "$mf"` - test -z "am__include" && continue - am__quote=`sed -n 's/^am__quote = //p' < "$mf"` - # When using ansi2knr, U may be empty or an underscore; expand it - U=`sed -n 's/^U = //p' < "$mf"` - # Find all dependency output files, they are included files with - # $(DEPDIR) in their names. We invoke sed twice because it is the - # simplest approach to changing $(DEPDIR) to its actual value in the - # expansion. - for file in `sed -n " - s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`$as_dirname -- "$file" || -$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$file" : 'X\(//\)[^/]' \| \ - X"$file" : 'X\(//\)$' \| \ - X"$file" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - as_dir=$dirpart/$fdir; as_fn_mkdir_p - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" - done - done -} - ;; - "libtool":C) - - # See if we are running on zsh, and set the options which allow our - # commands through without removal of \ escapes. - if test -n "${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST - fi - - cfgfile="${ofile}T" - trap "$RM \"$cfgfile\"; exit 1" 1 2 15 - $RM "$cfgfile" - - cat <<_LT_EOF >> "$cfgfile" -#! $SHELL - -# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. -# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION -# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: -# NOTE: Changes made to this file will be lost: look at ltmain.sh. -# -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, -# 2006, 2007, 2008, 2009, 2010, 2011 Free Software -# Foundation, Inc. -# Written by Gordon Matzigkeit, 1996 -# -# This file is part of GNU Libtool. -# -# GNU Libtool is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# As a special exception to the GNU General Public License, -# if you distribute this file as part of a program or library that -# is built using GNU Libtool, you may include this file under the -# same distribution terms that you use for the rest of that program. -# -# GNU Libtool is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with GNU Libtool; see the file COPYING. If not, a copy -# can be downloaded from http://www.gnu.org/licenses/gpl.html, or -# obtained by writing to the Free Software Foundation, Inc., -# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. - - -# The names of the tagged configurations supported by this script. -available_tags="" - -# ### BEGIN LIBTOOL CONFIG - -# Assembler program. -AS=$lt_AS - -# DLL creation program. -DLLTOOL=$lt_DLLTOOL - -# Object dumper program. -OBJDUMP=$lt_OBJDUMP - -# Which release of libtool.m4 was used? -macro_version=$macro_version -macro_revision=$macro_revision - -# Whether or not to build shared libraries. -build_libtool_libs=$enable_shared - -# Whether or not to build static libraries. -build_old_libs=$enable_static - -# What type of objects to build. -pic_mode=$pic_mode - -# Whether or not to optimize for fast installation. -fast_install=$enable_fast_install - -# Shell to use when invoking shell scripts. -SHELL=$lt_SHELL - -# An echo program that protects backslashes. -ECHO=$lt_ECHO - -# The PATH separator for the build system. -PATH_SEPARATOR=$lt_PATH_SEPARATOR - -# The host system. -host_alias=$host_alias -host=$host -host_os=$host_os - -# The build system. -build_alias=$build_alias -build=$build -build_os=$build_os - -# A sed program that does not truncate output. -SED=$lt_SED - -# Sed that helps us avoid accidentally triggering echo(1) options like -n. -Xsed="\$SED -e 1s/^X//" - -# A grep program that handles long lines. -GREP=$lt_GREP - -# An ERE matcher. -EGREP=$lt_EGREP - -# A literal string matcher. -FGREP=$lt_FGREP - -# A BSD- or MS-compatible name lister. -NM=$lt_NM - -# Whether we need soft or hard links. -LN_S=$lt_LN_S - -# What is the maximum length of a command? -max_cmd_len=$max_cmd_len - -# Object file suffix (normally "o"). -objext=$ac_objext - -# Executable file suffix (normally ""). -exeext=$exeext - -# whether the shell understands "unset". -lt_unset=$lt_unset - -# turn spaces into newlines. -SP2NL=$lt_lt_SP2NL - -# turn newlines into spaces. -NL2SP=$lt_lt_NL2SP - -# convert \$build file names to \$host format. -to_host_file_cmd=$lt_cv_to_host_file_cmd - -# convert \$build files to toolchain format. -to_tool_file_cmd=$lt_cv_to_tool_file_cmd - -# Method to check whether dependent libraries are shared objects. -deplibs_check_method=$lt_deplibs_check_method - -# Command to use when deplibs_check_method = "file_magic". -file_magic_cmd=$lt_file_magic_cmd - -# How to find potential files when deplibs_check_method = "file_magic". -file_magic_glob=$lt_file_magic_glob - -# Find potential files using nocaseglob when deplibs_check_method = "file_magic". -want_nocaseglob=$lt_want_nocaseglob - -# Command to associate shared and link libraries. -sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd - -# The archiver. -AR=$lt_AR - -# Flags to create an archive. -AR_FLAGS=$lt_AR_FLAGS - -# How to feed a file listing to the archiver. -archiver_list_spec=$lt_archiver_list_spec - -# A symbol stripping program. -STRIP=$lt_STRIP - -# Commands used to install an old-style archive. -RANLIB=$lt_RANLIB -old_postinstall_cmds=$lt_old_postinstall_cmds -old_postuninstall_cmds=$lt_old_postuninstall_cmds - -# Whether to use a lock for old archive extraction. -lock_old_archive_extraction=$lock_old_archive_extraction - -# A C compiler. -LTCC=$lt_CC - -# LTCC compiler flags. -LTCFLAGS=$lt_CFLAGS - -# Take the output of nm and produce a listing of raw symbols and C names. -global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe - -# Transform the output of nm in a proper C declaration. -global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl - -# Transform the output of nm in a C name address pair. -global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address - -# Transform the output of nm in a C name address pair when lib prefix is needed. -global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix - -# Specify filename containing input files for \$NM. -nm_file_list_spec=$lt_nm_file_list_spec - -# The root where to search for dependent libraries,and in which our libraries should be installed. -lt_sysroot=$lt_sysroot - -# The name of the directory that contains temporary libtool files. -objdir=$objdir - -# Used to examine libraries when file_magic_cmd begins with "file". -MAGIC_CMD=$MAGIC_CMD - -# Must we lock files when doing compilation? -need_locks=$lt_need_locks - -# Manifest tool. -MANIFEST_TOOL=$lt_MANIFEST_TOOL - -# Tool to manipulate archived DWARF debug symbol files on Mac OS X. -DSYMUTIL=$lt_DSYMUTIL - -# Tool to change global to local symbols on Mac OS X. -NMEDIT=$lt_NMEDIT - -# Tool to manipulate fat objects and archives on Mac OS X. -LIPO=$lt_LIPO - -# ldd/readelf like tool for Mach-O binaries on Mac OS X. -OTOOL=$lt_OTOOL - -# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4. -OTOOL64=$lt_OTOOL64 - -# Old archive suffix (normally "a"). -libext=$libext - -# Shared library suffix (normally ".so"). -shrext_cmds=$lt_shrext_cmds - -# The commands to extract the exported symbol list from a shared archive. -extract_expsyms_cmds=$lt_extract_expsyms_cmds - -# Variables whose values should be saved in libtool wrapper scripts and -# restored at link time. -variables_saved_for_relink=$lt_variables_saved_for_relink - -# Do we need the "lib" prefix for modules? -need_lib_prefix=$need_lib_prefix - -# Do we need a version for libraries? -need_version=$need_version - -# Library versioning type. -version_type=$version_type - -# Shared library runtime path variable. -runpath_var=$runpath_var - -# Shared library path variable. -shlibpath_var=$shlibpath_var - -# Is shlibpath searched before the hard-coded library search path? -shlibpath_overrides_runpath=$shlibpath_overrides_runpath - -# Format of library name prefix. -libname_spec=$lt_libname_spec - -# List of archive names. First name is the real one, the rest are links. -# The last name is the one that the linker finds with -lNAME -library_names_spec=$lt_library_names_spec - -# The coded name of the library, if different from the real name. -soname_spec=$lt_soname_spec - -# Permission mode override for installation of shared libraries. -install_override_mode=$lt_install_override_mode - -# Command to use after installation of a shared archive. -postinstall_cmds=$lt_postinstall_cmds - -# Command to use after uninstallation of a shared archive. -postuninstall_cmds=$lt_postuninstall_cmds - -# Commands used to finish a libtool library installation in a directory. -finish_cmds=$lt_finish_cmds - -# As "finish_cmds", except a single script fragment to be evaled but -# not shown. -finish_eval=$lt_finish_eval - -# Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs - -# Compile-time system search path for libraries. -sys_lib_search_path_spec=$lt_sys_lib_search_path_spec - -# Run-time system search path for libraries. -sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec - -# Whether dlopen is supported. -dlopen_support=$enable_dlopen - -# Whether dlopen of programs is supported. -dlopen_self=$enable_dlopen_self - -# Whether dlopen of statically linked programs is supported. -dlopen_self_static=$enable_dlopen_self_static - -# Commands to strip libraries. -old_striplib=$lt_old_striplib -striplib=$lt_striplib - - -# The linker used to build libraries. -LD=$lt_LD - -# How to create reloadable object files. -reload_flag=$lt_reload_flag -reload_cmds=$lt_reload_cmds - -# Commands used to build an old-style archive. -old_archive_cmds=$lt_old_archive_cmds - -# A language specific compiler. -CC=$lt_compiler - -# Is the compiler the GNU compiler? -with_gcc=$GCC - -# Compiler flag to turn off builtin functions. -no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag - -# Additional compiler flags for building library objects. -pic_flag=$lt_lt_prog_compiler_pic - -# How to pass a linker flag through the compiler. -wl=$lt_lt_prog_compiler_wl - -# Compiler flag to prevent dynamic linking. -link_static_flag=$lt_lt_prog_compiler_static - -# Does compiler simultaneously support -c and -o options? -compiler_c_o=$lt_lt_cv_prog_compiler_c_o - -# Whether or not to add -lc for building shared libraries. -build_libtool_need_lc=$archive_cmds_need_lc - -# Whether or not to disallow shared libs when runtime libs are static. -allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes - -# Compiler flag to allow reflexive dlopens. -export_dynamic_flag_spec=$lt_export_dynamic_flag_spec - -# Compiler flag to generate shared objects directly from archives. -whole_archive_flag_spec=$lt_whole_archive_flag_spec - -# Whether the compiler copes with passing no objects directly. -compiler_needs_object=$lt_compiler_needs_object - -# Create an old-style archive from a shared archive. -old_archive_from_new_cmds=$lt_old_archive_from_new_cmds - -# Create a temporary old-style archive to link instead of a shared archive. -old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds - -# Commands used to build a shared archive. -archive_cmds=$lt_archive_cmds -archive_expsym_cmds=$lt_archive_expsym_cmds - -# Commands used to build a loadable module if different from building -# a shared archive. -module_cmds=$lt_module_cmds -module_expsym_cmds=$lt_module_expsym_cmds - -# Whether we are building with GNU ld or not. -with_gnu_ld=$lt_with_gnu_ld - -# Flag that allows shared libraries with undefined symbols to be built. -allow_undefined_flag=$lt_allow_undefined_flag - -# Flag that enforces no undefined symbols. -no_undefined_flag=$lt_no_undefined_flag - -# Flag to hardcode \$libdir into a binary during linking. -# This must work even if \$libdir does not exist -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec - -# Whether we need a single "-rpath" flag with a separated argument. -hardcode_libdir_separator=$lt_hardcode_libdir_separator - -# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes -# DIR into the resulting binary. -hardcode_direct=$hardcode_direct - -# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes -# DIR into the resulting binary and the resulting library dependency is -# "absolute",i.e impossible to change by setting \${shlibpath_var} if the -# library is relocated. -hardcode_direct_absolute=$hardcode_direct_absolute - -# Set to "yes" if using the -LDIR flag during linking hardcodes DIR -# into the resulting binary. -hardcode_minus_L=$hardcode_minus_L - -# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR -# into the resulting binary. -hardcode_shlibpath_var=$hardcode_shlibpath_var - -# Set to "yes" if building a shared library automatically hardcodes DIR -# into the library and all subsequent libraries and executables linked -# against it. -hardcode_automatic=$hardcode_automatic - -# Set to yes if linker adds runtime paths of dependent libraries -# to runtime path list. -inherit_rpath=$inherit_rpath - -# Whether libtool must link a program against all its dependency libraries. -link_all_deplibs=$link_all_deplibs - -# Set to "yes" if exported symbols are required. -always_export_symbols=$always_export_symbols - -# The commands to list exported symbols. -export_symbols_cmds=$lt_export_symbols_cmds - -# Symbols that should not be listed in the preloaded symbols. -exclude_expsyms=$lt_exclude_expsyms - -# Symbols that must always be exported. -include_expsyms=$lt_include_expsyms - -# Commands necessary for linking programs (against libraries) with templates. -prelink_cmds=$lt_prelink_cmds - -# Commands necessary for finishing linking programs. -postlink_cmds=$lt_postlink_cmds - -# Specify filename containing input files. -file_list_spec=$lt_file_list_spec - -# How to hardcode a shared library path into an executable. -hardcode_action=$hardcode_action - -# ### END LIBTOOL CONFIG - -_LT_EOF - - case $host_os in - aix3*) - cat <<\_LT_EOF >> "$cfgfile" -# AIX sometimes has problems with the GCC collect2 program. For some -# reason, if we set the COLLECT_NAMES environment variable, the problems -# vanish in a puff of smoke. -if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES -fi -_LT_EOF - ;; - esac - - -ltmain="$ac_aux_dir/ltmain.sh" - - - # We use sed instead of cat because bash on DJGPP gets confused if - # if finds mixed CR/LF and LF-only lines. Since sed operates in - # text mode, it properly converts lines to CR/LF. This bash problem - # is reportedly fixed, but why not run on old versions too? - sed '$q' "$ltmain" >> "$cfgfile" \ - || (rm -f "$cfgfile"; exit 1) - - if test x"$xsi_shell" = xyes; then - sed -e '/^func_dirname ()$/,/^} # func_dirname /c\ -func_dirname ()\ -{\ -\ case ${1} in\ -\ */*) func_dirname_result="${1%/*}${2}" ;;\ -\ * ) func_dirname_result="${3}" ;;\ -\ esac\ -} # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_basename ()$/,/^} # func_basename /c\ -func_basename ()\ -{\ -\ func_basename_result="${1##*/}"\ -} # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\ -func_dirname_and_basename ()\ -{\ -\ case ${1} in\ -\ */*) func_dirname_result="${1%/*}${2}" ;;\ -\ * ) func_dirname_result="${3}" ;;\ -\ esac\ -\ func_basename_result="${1##*/}"\ -} # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_stripname ()$/,/^} # func_stripname /c\ -func_stripname ()\ -{\ -\ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\ -\ # positional parameters, so assign one to ordinary parameter first.\ -\ func_stripname_result=${3}\ -\ func_stripname_result=${func_stripname_result#"${1}"}\ -\ func_stripname_result=${func_stripname_result%"${2}"}\ -} # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\ -func_split_long_opt ()\ -{\ -\ func_split_long_opt_name=${1%%=*}\ -\ func_split_long_opt_arg=${1#*=}\ -} # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\ -func_split_short_opt ()\ -{\ -\ func_split_short_opt_arg=${1#??}\ -\ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\ -} # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\ -func_lo2o ()\ -{\ -\ case ${1} in\ -\ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\ -\ *) func_lo2o_result=${1} ;;\ -\ esac\ -} # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_xform ()$/,/^} # func_xform /c\ -func_xform ()\ -{\ - func_xform_result=${1%.*}.lo\ -} # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_arith ()$/,/^} # func_arith /c\ -func_arith ()\ -{\ - func_arith_result=$(( $* ))\ -} # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_len ()$/,/^} # func_len /c\ -func_len ()\ -{\ - func_len_result=${#1}\ -} # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - -fi - -if test x"$lt_shell_append" = xyes; then - sed -e '/^func_append ()$/,/^} # func_append /c\ -func_append ()\ -{\ - eval "${1}+=\\${2}"\ -} # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\ -func_append_quoted ()\ -{\ -\ func_quote_for_eval "${2}"\ -\ eval "${1}+=\\\\ \\$func_quote_for_eval_result"\ -} # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - # Save a `func_append' function call where possible by direct use of '+=' - sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") - test 0 -eq $? || _lt_function_replace_fail=: -else - # Save a `func_append' function call even when '+=' is not available - sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") - test 0 -eq $? || _lt_function_replace_fail=: -fi - -if test x"$_lt_function_replace_fail" = x":"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5 -$as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;} -fi - - - mv -f "$cfgfile" "$ofile" || - (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") - chmod +x "$ofile" - - ;; - - esac -done # for ac_tag - - -as_fn_exit 0 -_ACEOF -ac_clean_files=$ac_clean_files_save - -test $ac_write_fail = 0 || - as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 - - -# configure is writing to config.log, and then calls config.status. -# config.status does its own redirection, appending to config.log. -# Unfortunately, on DOS this fails, as config.log is still kept open -# by configure, so config.status won't be able to write to it; its -# output is simply discarded. So we exec the FD to /dev/null, -# effectively closing config.log, so it can be properly (re)opened and -# appended to by config.status. When coming back to configure, we -# need to make the FD available again. -if test "$no_create" != yes; then - ac_cs_success=: - ac_config_status_args= - test "$silent" = yes && - ac_config_status_args="$ac_config_status_args --quiet" - exec 5>/dev/null - $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false - exec 5>>config.log - # Use ||, not &&, to avoid exiting from the if with $? = 1, which - # would make configure fail if this is the last instruction. - $ac_cs_success || as_fn_exit 1 -fi -if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 -$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} -fi - diff --git a/jpeg/configure.ac b/jpeg/configure.ac deleted file mode 100755 index 12293b0..0000000 --- a/jpeg/configure.ac +++ /dev/null @@ -1,356 +0,0 @@ -# IJG auto-configuration source file. -# Process this file with autoconf to produce a configure script. - -# -# Configure script for IJG libjpeg -# - -AC_INIT([libjpeg], [8.4.0]) - -# Directory where autotools helper scripts lives. -AC_CONFIG_AUX_DIR([.]) - -# Generate configuration headers. -AC_CONFIG_HEADERS([jconfig.h:jconfig.cfg]) - -# Hack: disable autoheader so that it doesn't overwrite our cfg template. -AUTOHEADER="echo autoheader ignored" - -# Check system type -AC_CANONICAL_TARGET - -# Initialize Automake -# Don't require all the GNU mandated files -AM_INIT_AUTOMAKE([-Wall -Werror -Wno-obsolete ansi2knr no-dist foreign]) - -# Make --enable-silent-rules the default. -# To get verbose build output you may configure -# with --disable-silent-rules or use "make V=1". -AM_SILENT_RULES([yes]) - -# This is required when using the de-ANSI-fication feature. -AM_C_PROTOTYPES - -# Add configure option --enable-maintainer-mode which enables -# dependency checking and generation useful to package maintainers. -# This is made an option to avoid confusing end users. -AM_MAINTAINER_MODE - -# Check for programs -AC_PROG_CC -AC_PROG_CC_STDC -AC_PROG_CPP -AC_PROG_INSTALL -AC_PROG_MAKE_SET -AC_PROG_LN_S - -# Check if LD supports linker scripts, -# and define automake conditional HAVE_LD_VERSION_SCRIPT if so. -AC_ARG_ENABLE([ld-version-script], - AS_HELP_STRING([--enable-ld-version-script], - [enable linker version script (default is enabled when possible)]), - [have_ld_version_script=$enableval], []) -if test -z "$have_ld_version_script"; then - AC_MSG_CHECKING([if LD -Wl,--version-script works]) - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS -Wl,--version-script=conftest.map" - cat > conftest.map < rather than standard .])]) - -# See whether type size_t is defined in any ANSI-standard places; -# if not, perhaps it is defined in . -AC_MSG_CHECKING([for size_t]) -AC_TRY_COMPILE([ -#ifdef HAVE_STDDEF_H -#include -#endif -#ifdef HAVE_STDLIB_H -#include -#endif -#include -#ifdef NEED_BSD_STRINGS -#include -#else -#include -#endif -typedef size_t my_size_t; -], - [ my_size_t foovar; ], - [ijg_size_t_ok=yes], - [ijg_size_t_ok="not ANSI, perhaps it is in sys/types.h"]) -AC_MSG_RESULT([$ijg_size_t_ok]) -if test "$ijg_size_t_ok" != yes; then - AC_CHECK_HEADER([sys/types.h], - [AC_DEFINE([NEED_SYS_TYPES_H], [1], - [Need to include in order to obtain size_t.]) - AC_EGREP_CPP([size_t], [#include ], - [ijg_size_t_ok="size_t is in sys/types.h"], - [ijg_size_t_ok=no])], - [ijg_size_t_ok=no]) - AC_MSG_RESULT([$ijg_size_t_ok]) - if test "$ijg_size_t_ok" = no; then - AC_MSG_WARN([Type size_t is not defined in any of the usual places. - Try putting '"typedef unsigned int size_t;"' in jconfig.h.]) - fi -fi - -# Check compiler characteristics -AC_MSG_CHECKING([for type unsigned char]) -AC_TRY_COMPILE([], [ unsigned char un_char; ], - [AC_MSG_RESULT(yes) - AC_DEFINE([HAVE_UNSIGNED_CHAR], [1], - [Compiler supports 'unsigned char'.])], - [AC_MSG_RESULT(no)]) - -AC_MSG_CHECKING([for type unsigned short]) -AC_TRY_COMPILE([], [ unsigned short un_short; ], - [AC_MSG_RESULT(yes) - AC_DEFINE([HAVE_UNSIGNED_SHORT], [1], - [Compiler supports 'unsigned short'.])], - [AC_MSG_RESULT(no)]) - -AC_MSG_CHECKING([for type void]) -AC_TRY_COMPILE([ -/* Caution: a C++ compiler will insist on valid prototypes */ -typedef void * void_ptr; /* check void * */ -#ifdef HAVE_PROTOTYPES /* check ptr to function returning void */ -typedef void (*void_func) (int a, int b); -#else -typedef void (*void_func) (); -#endif - -#ifdef HAVE_PROTOTYPES /* check void function result */ -void test3function (void_ptr arg1, void_func arg2) -#else -void test3function (arg1, arg2) - void_ptr arg1; - void_func arg2; -#endif -{ - char * locptr = (char *) arg1; /* check casting to and from void * */ - arg1 = (void *) locptr; - (*arg2) (1, 2); /* check call of fcn returning void */ -} -], [ ], - [AC_MSG_RESULT(yes)], - [AC_MSG_RESULT(no) - AC_DEFINE([void], [char], - [Define 'void' as 'char' for archaic compilers - that don't understand it.])]) -AC_C_CONST - -# Check for non-broken inline under various spellings -AC_MSG_CHECKING([for inline]) -ijg_cv_inline="" -AC_TRY_COMPILE([], [} __inline__ int foo() { return 0; } -int bar() { return foo();], ijg_cv_inline="__inline__", -[AC_TRY_COMPILE(, [} __inline int foo() { return 0; } -int bar() { return foo();], ijg_cv_inline="__inline", -[AC_TRY_COMPILE(, [} inline int foo() { return 0; } -int bar() { return foo();], ijg_cv_inline="inline")])]) -AC_MSG_RESULT($ijg_cv_inline) -AC_DEFINE_UNQUOTED([INLINE], [$ijg_cv_inline], - [How to obtain function inlining.]) - -# We cannot check for bogus warnings, but at least we can check for errors -AC_MSG_CHECKING([for broken incomplete types]) -AC_TRY_COMPILE([ typedef struct undefined_structure * undef_struct_ptr; ], - [], - [AC_MSG_RESULT(ok)], - [AC_MSG_RESULT(broken) - AC_DEFINE([INCOMPLETE_TYPES_BROKEN], [1], - [Compiler does not support pointers to unspecified - structures.])]) - -# Test whether global names are unique to at least 15 chars -AC_MSG_CHECKING([for short external names]) -AC_TRY_LINK([ -int possibly_duplicate_function () { return 0; } -int possibly_dupli_function () { return 1; } -], [], - [AC_MSG_RESULT(ok)], - [AC_MSG_RESULT(short) - AC_DEFINE([NEED_SHORT_EXTERNAL_NAMES], [1], - [Linker requires that global names be unique in - first 15 characters.])]) - -# Run-time checks -AC_MSG_CHECKING([to see if char is signed]) -AC_TRY_RUN([ -#ifdef HAVE_PROTOTYPES -int is_char_signed (int arg) -#else -int is_char_signed (arg) - int arg; -#endif -{ - if (arg == 189) { /* expected result for unsigned char */ - return 0; /* type char is unsigned */ - } - else if (arg != -67) { /* expected result for signed char */ - printf("Hmm, it seems 'char' is not eight bits wide on your machine.\n"); - printf("I fear the JPEG software will not work at all.\n\n"); - } - return 1; /* assume char is signed otherwise */ -} -char signed_char_check = (char) (-67); -int main() { - exit(is_char_signed((int) signed_char_check)); -}], [AC_MSG_RESULT(no) - AC_DEFINE([CHAR_IS_UNSIGNED], [1], - [Characters are unsigned])], - [AC_MSG_RESULT(yes)], -[AC_MSG_WARN([Assuming that char is signed on target machine. - If it is unsigned, this will be a little bit inefficient.]) -]) - -AC_MSG_CHECKING([to see if right shift is signed]) -AC_TRY_RUN([ -#ifdef HAVE_PROTOTYPES -int is_shifting_signed (long arg) -#else -int is_shifting_signed (arg) - long arg; -#endif -/* See whether right-shift on a long is signed or not. */ -{ - long res = arg >> 4; - - if (res == -0x7F7E80CL) { /* expected result for signed shift */ - return 1; /* right shift is signed */ - } - /* see if unsigned-shift hack will fix it. */ - /* we can't just test exact value since it depends on width of long... */ - res |= (~0L) << (32-4); - if (res == -0x7F7E80CL) { /* expected result now? */ - return 0; /* right shift is unsigned */ - } - printf("Right shift isn't acting as I expect it to.\n"); - printf("I fear the JPEG software will not work at all.\n\n"); - return 0; /* try it with unsigned anyway */ -} -int main() { - exit(is_shifting_signed(-0x7F7E80B1L)); -}], - [AC_MSG_RESULT(no) - AC_DEFINE([RIGHT_SHIFT_IS_UNSIGNED], [1], - [Broken compiler shifts signed values as an unsigned shift.])], - [AC_MSG_RESULT(yes)], - [AC_MSG_RESULT(Assuming that right shift is signed on target machine.)]) - -AC_MSG_CHECKING([to see if fopen accepts b spec]) -AC_TRY_RUN([ -#include -int main() { - if (fopen("conftestdata", "wb") != NULL) - exit(0); - exit(1); -}], - [AC_MSG_RESULT(yes)], - [AC_MSG_RESULT(no) - AC_DEFINE([DONT_USE_B_MODE], [1], - [Don't open files in binary mode.])], - [AC_MSG_RESULT(Assuming that it does.)]) - -# Configure libtool -AC_LIBTOOL_WIN32_DLL -AC_PROG_LIBTOOL - -# Select memory manager depending on user input. -# If no "-enable-maxmem", use jmemnobs -MEMORYMGR='jmemnobs' -MAXMEM="no" -AC_ARG_ENABLE([maxmem], -[ --enable-maxmem[=N] enable use of temp files, set max mem usage to N MB], -[MAXMEM="$enableval"]) -dnl [# support --with-maxmem for backwards compatibility with IJG V5.] -dnl AC_ARG_WITH(maxmem, , MAXMEM="$withval") -if test "x$MAXMEM" = xyes; then - MAXMEM=1 -fi -if test "x$MAXMEM" != xno; then - if test -n "`echo $MAXMEM | sed 's/[[0-9]]//g'`"; then - AC_MSG_ERROR(non-numeric argument to --enable-maxmem) - fi - DEFAULTMAXMEM=`expr $MAXMEM \* 1048576` - AC_DEFINE_UNQUOTED([DEFAULT_MAX_MEM], [${DEFAULTMAXMEM}], - [Maximum data space library will allocate.]) - AC_MSG_CHECKING([for 'tmpfile()']) - AC_TRY_LINK([#include ], [ FILE * tfile = tmpfile(); ], - [AC_MSG_RESULT(yes) - MEMORYMGR='jmemansi'], - [AC_MSG_RESULT(no) - dnl if tmpfile is not present, must use jmemname. - MEMORYMGR='jmemname' - - # Test for the need to remove temporary files using a signal handler - # (for cjpeg/djpeg) - AC_DEFINE([NEED_SIGNAL_CATCHER], [1], - [Need signal handler to clean up temporary files.]) - AC_MSG_CHECKING([for 'mktemp()']) - AC_TRY_LINK([], [ char fname[80]; mktemp(fname); ], - [AC_MSG_RESULT(yes)], - [AC_MSG_RESULT(no) - AC_DEFINE([NO_MKTEMP], [1], - [The mktemp() function is not available.])])]) -fi -AC_SUBST([MEMORYMGR]) - -# Extract the library version IDs from jpeglib.h. -AC_MSG_CHECKING([libjpeg version number]) -[major=`sed -ne 's/^#define JPEG_LIB_VERSION_MAJOR *\([0-9][0-9]*\).*$/\1/p' $srcdir/jpeglib.h` -minor=`sed -ne 's/^#define JPEG_LIB_VERSION_MINOR *\([0-9][0-9]*\).*$/\1/p' $srcdir/jpeglib.h`] -AC_SUBST([JPEG_LIB_VERSION], - [`expr $major + $minor`:0:$minor]) -AC_MSG_RESULT([$JPEG_LIB_VERSION]) - -AC_CONFIG_FILES([Makefile]) -AC_OUTPUT diff --git a/jpeg/depcomp b/jpeg/depcomp deleted file mode 100755 index bd0ac08..0000000 --- a/jpeg/depcomp +++ /dev/null @@ -1,688 +0,0 @@ -#! /bin/sh -# depcomp - compile a program generating dependencies as side-effects - -scriptversion=2011-12-04.11; # UTC - -# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009, 2010, -# 2011 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . - -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# Originally written by Alexandre Oliva . - -case $1 in - '') - echo "$0: No command. Try \`$0 --help' for more information." 1>&2 - exit 1; - ;; - -h | --h*) - cat <<\EOF -Usage: depcomp [--help] [--version] PROGRAM [ARGS] - -Run PROGRAMS ARGS to compile a file, generating dependencies -as side-effects. - -Environment variables: - depmode Dependency tracking mode. - source Source file read by `PROGRAMS ARGS'. - object Object file output by `PROGRAMS ARGS'. - DEPDIR directory where to store dependencies. - depfile Dependency file to output. - tmpdepfile Temporary file to use when outputting dependencies. - libtool Whether libtool is used (yes/no). - -Report bugs to . -EOF - exit $? - ;; - -v | --v*) - echo "depcomp $scriptversion" - exit $? - ;; -esac - -if test -z "$depmode" || test -z "$source" || test -z "$object"; then - echo "depcomp: Variables source, object and depmode must be set" 1>&2 - exit 1 -fi - -# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po. -depfile=${depfile-`echo "$object" | - sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`} -tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} - -rm -f "$tmpdepfile" - -# Some modes work just like other modes, but use different flags. We -# parameterize here, but still list the modes in the big case below, -# to make depend.m4 easier to write. Note that we *cannot* use a case -# here, because this file can only contain one case statement. -if test "$depmode" = hp; then - # HP compiler uses -M and no extra arg. - gccflag=-M - depmode=gcc -fi - -if test "$depmode" = dashXmstdout; then - # This is just like dashmstdout with a different argument. - dashmflag=-xM - depmode=dashmstdout -fi - -cygpath_u="cygpath -u -f -" -if test "$depmode" = msvcmsys; then - # This is just like msvisualcpp but w/o cygpath translation. - # Just convert the backslash-escaped backslashes to single forward - # slashes to satisfy depend.m4 - cygpath_u='sed s,\\\\,/,g' - depmode=msvisualcpp -fi - -if test "$depmode" = msvc7msys; then - # This is just like msvc7 but w/o cygpath translation. - # Just convert the backslash-escaped backslashes to single forward - # slashes to satisfy depend.m4 - cygpath_u='sed s,\\\\,/,g' - depmode=msvc7 -fi - -case "$depmode" in -gcc3) -## gcc 3 implements dependency tracking that does exactly what -## we want. Yay! Note: for some reason libtool 1.4 doesn't like -## it if -MD -MP comes after the -MF stuff. Hmm. -## Unfortunately, FreeBSD c89 acceptance of flags depends upon -## the command line argument order; so add the flags where they -## appear in depend2.am. Note that the slowdown incurred here -## affects only configure: in makefiles, %FASTDEP% shortcuts this. - for arg - do - case $arg in - -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;; - *) set fnord "$@" "$arg" ;; - esac - shift # fnord - shift # $arg - done - "$@" - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile" - exit $stat - fi - mv "$tmpdepfile" "$depfile" - ;; - -gcc) -## There are various ways to get dependency output from gcc. Here's -## why we pick this rather obscure method: -## - Don't want to use -MD because we'd like the dependencies to end -## up in a subdir. Having to rename by hand is ugly. -## (We might end up doing this anyway to support other compilers.) -## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like -## -MM, not -M (despite what the docs say). -## - Using -M directly means running the compiler twice (even worse -## than renaming). - if test -z "$gccflag"; then - gccflag=-MD, - fi - "$@" -Wp,"$gccflag$tmpdepfile" - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile" - exit $stat - fi - rm -f "$depfile" - echo "$object : \\" > "$depfile" - alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz -## The second -e expression handles DOS-style file names with drive letters. - sed -e 's/^[^:]*: / /' \ - -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" -## This next piece of magic avoids the `deleted header file' problem. -## The problem is that when a header file which appears in a .P file -## is deleted, the dependency causes make to die (because there is -## typically no way to rebuild the header). We avoid this by adding -## dummy dependencies for each header file. Too bad gcc doesn't do -## this for us directly. - tr ' ' ' -' < "$tmpdepfile" | -## Some versions of gcc put a space before the `:'. On the theory -## that the space means something, we add a space to the output as -## well. hp depmode also adds that space, but also prefixes the VPATH -## to the object. Take care to not repeat it in the output. -## Some versions of the HPUX 10.20 sed can't process this invocation -## correctly. Breaking it into two sed invocations is a workaround. - sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \ - | sed -e 's/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -hp) - # This case exists only to let depend.m4 do its work. It works by - # looking at the text of this script. This case will never be run, - # since it is checked for above. - exit 1 - ;; - -sgi) - if test "$libtool" = yes; then - "$@" "-Wp,-MDupdate,$tmpdepfile" - else - "$@" -MDupdate "$tmpdepfile" - fi - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile" - exit $stat - fi - rm -f "$depfile" - - if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files - echo "$object : \\" > "$depfile" - - # Clip off the initial element (the dependent). Don't try to be - # clever and replace this with sed code, as IRIX sed won't handle - # lines with more than a fixed number of characters (4096 in - # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; - # the IRIX cc adds comments like `#:fec' to the end of the - # dependency line. - tr ' ' ' -' < "$tmpdepfile" \ - | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \ - tr ' -' ' ' >> "$depfile" - echo >> "$depfile" - - # The second pass generates a dummy entry for each header file. - tr ' ' ' -' < "$tmpdepfile" \ - | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ - >> "$depfile" - else - # The sourcefile does not contain any dependencies, so just - # store a dummy comment line, to avoid errors with the Makefile - # "include basename.Plo" scheme. - echo "#dummy" > "$depfile" - fi - rm -f "$tmpdepfile" - ;; - -aix) - # The C for AIX Compiler uses -M and outputs the dependencies - # in a .u file. In older versions, this file always lives in the - # current directory. Also, the AIX compiler puts `$object:' at the - # start of each line; $object doesn't have directory information. - # Version 6 uses the directory in both cases. - dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` - test "x$dir" = "x$object" && dir= - base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` - if test "$libtool" = yes; then - tmpdepfile1=$dir$base.u - tmpdepfile2=$base.u - tmpdepfile3=$dir.libs/$base.u - "$@" -Wc,-M - else - tmpdepfile1=$dir$base.u - tmpdepfile2=$dir$base.u - tmpdepfile3=$dir$base.u - "$@" -M - fi - stat=$? - - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" - exit $stat - fi - - for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" - do - test -f "$tmpdepfile" && break - done - if test -f "$tmpdepfile"; then - # Each line is of the form `foo.o: dependent.h'. - # Do two passes, one to just change these to - # `$object: dependent.h' and one to simply `dependent.h:'. - sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" - # That's a tab and a space in the []. - sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" - else - # The sourcefile does not contain any dependencies, so just - # store a dummy comment line, to avoid errors with the Makefile - # "include basename.Plo" scheme. - echo "#dummy" > "$depfile" - fi - rm -f "$tmpdepfile" - ;; - -icc) - # Intel's C compiler understands `-MD -MF file'. However on - # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c - # ICC 7.0 will fill foo.d with something like - # foo.o: sub/foo.c - # foo.o: sub/foo.h - # which is wrong. We want: - # sub/foo.o: sub/foo.c - # sub/foo.o: sub/foo.h - # sub/foo.c: - # sub/foo.h: - # ICC 7.1 will output - # foo.o: sub/foo.c sub/foo.h - # and will wrap long lines using \ : - # foo.o: sub/foo.c ... \ - # sub/foo.h ... \ - # ... - - "$@" -MD -MF "$tmpdepfile" - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile" - exit $stat - fi - rm -f "$depfile" - # Each line is of the form `foo.o: dependent.h', - # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'. - # Do two passes, one to just change these to - # `$object: dependent.h' and one to simply `dependent.h:'. - sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" - # Some versions of the HPUX 10.20 sed can't process this invocation - # correctly. Breaking it into two sed invocations is a workaround. - sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" | - sed -e 's/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -hp2) - # The "hp" stanza above does not work with aCC (C++) and HP's ia64 - # compilers, which have integrated preprocessors. The correct option - # to use with these is +Maked; it writes dependencies to a file named - # 'foo.d', which lands next to the object file, wherever that - # happens to be. - # Much of this is similar to the tru64 case; see comments there. - dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` - test "x$dir" = "x$object" && dir= - base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` - if test "$libtool" = yes; then - tmpdepfile1=$dir$base.d - tmpdepfile2=$dir.libs/$base.d - "$@" -Wc,+Maked - else - tmpdepfile1=$dir$base.d - tmpdepfile2=$dir$base.d - "$@" +Maked - fi - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile1" "$tmpdepfile2" - exit $stat - fi - - for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" - do - test -f "$tmpdepfile" && break - done - if test -f "$tmpdepfile"; then - sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile" - # Add `dependent.h:' lines. - sed -ne '2,${ - s/^ *// - s/ \\*$// - s/$/:/ - p - }' "$tmpdepfile" >> "$depfile" - else - echo "#dummy" > "$depfile" - fi - rm -f "$tmpdepfile" "$tmpdepfile2" - ;; - -tru64) - # The Tru64 compiler uses -MD to generate dependencies as a side - # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'. - # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put - # dependencies in `foo.d' instead, so we check for that too. - # Subdirectories are respected. - dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` - test "x$dir" = "x$object" && dir= - base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` - - if test "$libtool" = yes; then - # With Tru64 cc, shared objects can also be used to make a - # static library. This mechanism is used in libtool 1.4 series to - # handle both shared and static libraries in a single compilation. - # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d. - # - # With libtool 1.5 this exception was removed, and libtool now - # generates 2 separate objects for the 2 libraries. These two - # compilations output dependencies in $dir.libs/$base.o.d and - # in $dir$base.o.d. We have to check for both files, because - # one of the two compilations can be disabled. We should prefer - # $dir$base.o.d over $dir.libs/$base.o.d because the latter is - # automatically cleaned when .libs/ is deleted, while ignoring - # the former would cause a distcleancheck panic. - tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4 - tmpdepfile2=$dir$base.o.d # libtool 1.5 - tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5 - tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504 - "$@" -Wc,-MD - else - tmpdepfile1=$dir$base.o.d - tmpdepfile2=$dir$base.d - tmpdepfile3=$dir$base.d - tmpdepfile4=$dir$base.d - "$@" -MD - fi - - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" - exit $stat - fi - - for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" - do - test -f "$tmpdepfile" && break - done - if test -f "$tmpdepfile"; then - sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" - # That's a tab and a space in the []. - sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" - else - echo "#dummy" > "$depfile" - fi - rm -f "$tmpdepfile" - ;; - -msvc7) - if test "$libtool" = yes; then - showIncludes=-Wc,-showIncludes - else - showIncludes=-showIncludes - fi - "$@" $showIncludes > "$tmpdepfile" - stat=$? - grep -v '^Note: including file: ' "$tmpdepfile" - if test "$stat" = 0; then : - else - rm -f "$tmpdepfile" - exit $stat - fi - rm -f "$depfile" - echo "$object : \\" > "$depfile" - # The first sed program below extracts the file names and escapes - # backslashes for cygpath. The second sed program outputs the file - # name when reading, but also accumulates all include files in the - # hold buffer in order to output them again at the end. This only - # works with sed implementations that can handle large buffers. - sed < "$tmpdepfile" -n ' -/^Note: including file: *\(.*\)/ { - s//\1/ - s/\\/\\\\/g - p -}' | $cygpath_u | sort -u | sed -n ' -s/ /\\ /g -s/\(.*\)/ \1 \\/p -s/.\(.*\) \\/\1:/ -H -$ { - s/.*/ / - G - p -}' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -msvc7msys) - # This case exists only to let depend.m4 do its work. It works by - # looking at the text of this script. This case will never be run, - # since it is checked for above. - exit 1 - ;; - -#nosideeffect) - # This comment above is used by automake to tell side-effect - # dependency tracking mechanisms from slower ones. - -dashmstdout) - # Important note: in order to support this mode, a compiler *must* - # always write the preprocessed file to stdout, regardless of -o. - "$@" || exit $? - - # Remove the call to Libtool. - if test "$libtool" = yes; then - while test "X$1" != 'X--mode=compile'; do - shift - done - shift - fi - - # Remove `-o $object'. - IFS=" " - for arg - do - case $arg in - -o) - shift - ;; - $object) - shift - ;; - *) - set fnord "$@" "$arg" - shift # fnord - shift # $arg - ;; - esac - done - - test -z "$dashmflag" && dashmflag=-M - # Require at least two characters before searching for `:' - # in the target name. This is to cope with DOS-style filenames: - # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise. - "$@" $dashmflag | - sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile" - rm -f "$depfile" - cat < "$tmpdepfile" > "$depfile" - tr ' ' ' -' < "$tmpdepfile" | \ -## Some versions of the HPUX 10.20 sed can't process this invocation -## correctly. Breaking it into two sed invocations is a workaround. - sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -dashXmstdout) - # This case only exists to satisfy depend.m4. It is never actually - # run, as this mode is specially recognized in the preamble. - exit 1 - ;; - -makedepend) - "$@" || exit $? - # Remove any Libtool call - if test "$libtool" = yes; then - while test "X$1" != 'X--mode=compile'; do - shift - done - shift - fi - # X makedepend - shift - cleared=no eat=no - for arg - do - case $cleared in - no) - set ""; shift - cleared=yes ;; - esac - if test $eat = yes; then - eat=no - continue - fi - case "$arg" in - -D*|-I*) - set fnord "$@" "$arg"; shift ;; - # Strip any option that makedepend may not understand. Remove - # the object too, otherwise makedepend will parse it as a source file. - -arch) - eat=yes ;; - -*|$object) - ;; - *) - set fnord "$@" "$arg"; shift ;; - esac - done - obj_suffix=`echo "$object" | sed 's/^.*\././'` - touch "$tmpdepfile" - ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" - rm -f "$depfile" - # makedepend may prepend the VPATH from the source file name to the object. - # No need to regex-escape $object, excess matching of '.' is harmless. - sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile" - sed '1,2d' "$tmpdepfile" | tr ' ' ' -' | \ -## Some versions of the HPUX 10.20 sed can't process this invocation -## correctly. Breaking it into two sed invocations is a workaround. - sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" "$tmpdepfile".bak - ;; - -cpp) - # Important note: in order to support this mode, a compiler *must* - # always write the preprocessed file to stdout. - "$@" || exit $? - - # Remove the call to Libtool. - if test "$libtool" = yes; then - while test "X$1" != 'X--mode=compile'; do - shift - done - shift - fi - - # Remove `-o $object'. - IFS=" " - for arg - do - case $arg in - -o) - shift - ;; - $object) - shift - ;; - *) - set fnord "$@" "$arg" - shift # fnord - shift # $arg - ;; - esac - done - - "$@" -E | - sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ - -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' | - sed '$ s: \\$::' > "$tmpdepfile" - rm -f "$depfile" - echo "$object : \\" > "$depfile" - cat < "$tmpdepfile" >> "$depfile" - sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -msvisualcpp) - # Important note: in order to support this mode, a compiler *must* - # always write the preprocessed file to stdout. - "$@" || exit $? - - # Remove the call to Libtool. - if test "$libtool" = yes; then - while test "X$1" != 'X--mode=compile'; do - shift - done - shift - fi - - IFS=" " - for arg - do - case "$arg" in - -o) - shift - ;; - $object) - shift - ;; - "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") - set fnord "$@" - shift - shift - ;; - *) - set fnord "$@" "$arg" - shift - shift - ;; - esac - done - "$@" -E 2>/dev/null | - sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile" - rm -f "$depfile" - echo "$object : \\" > "$depfile" - sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile" - echo " " >> "$depfile" - sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -msvcmsys) - # This case exists only to let depend.m4 do its work. It works by - # looking at the text of this script. This case will never be run, - # since it is checked for above. - exit 1 - ;; - -none) - exec "$@" - ;; - -*) - echo "Unknown depmode $depmode" 1>&2 - exit 1 - ;; -esac - -exit 0 - -# Local Variables: -# mode: shell-script -# sh-indentation: 2 -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "scriptversion=" -# time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-time-zone: "UTC" -# time-stamp-end: "; # UTC" -# End: diff --git a/jpeg/djpeg.1 b/jpeg/djpeg.1 deleted file mode 100755 index f3722d1..0000000 --- a/jpeg/djpeg.1 +++ /dev/null @@ -1,252 +0,0 @@ -.TH DJPEG 1 "3 October 2009" -.SH NAME -djpeg \- decompress a JPEG file to an image file -.SH SYNOPSIS -.B djpeg -[ -.I options -] -[ -.I filename -] -.LP -.SH DESCRIPTION -.LP -.B djpeg -decompresses the named JPEG file, or the standard input if no file is named, -and produces an image file on the standard output. PBMPLUS (PPM/PGM), BMP, -GIF, Targa, or RLE (Utah Raster Toolkit) output format can be selected. -(RLE is supported only if the URT library is available.) -.SH OPTIONS -All switch names may be abbreviated; for example, -.B \-grayscale -may be written -.B \-gray -or -.BR \-gr . -Most of the "basic" switches can be abbreviated to as little as one letter. -Upper and lower case are equivalent (thus -.B \-BMP -is the same as -.BR \-bmp ). -British spellings are also accepted (e.g., -.BR \-greyscale ), -though for brevity these are not mentioned below. -.PP -The basic switches are: -.TP -.BI \-colors " N" -Reduce image to at most N colors. This reduces the number of colors used in -the output image, so that it can be displayed on a colormapped display or -stored in a colormapped file format. For example, if you have an 8-bit -display, you'd need to reduce to 256 or fewer colors. -.TP -.BI \-quantize " N" -Same as -.BR \-colors . -.B \-colors -is the recommended name, -.B \-quantize -is provided only for backwards compatibility. -.TP -.B \-fast -Select recommended processing options for fast, low quality output. (The -default options are chosen for highest quality output.) Currently, this is -equivalent to \fB\-dct fast \-nosmooth \-onepass \-dither ordered\fR. -.TP -.B \-grayscale -Force gray-scale output even if JPEG file is color. Useful for viewing on -monochrome displays; also, -.B djpeg -runs noticeably faster in this mode. -.TP -.BI \-scale " M/N" -Scale the output image by a factor M/N. Currently supported scale factors are -M/N with all M from 1 to 16, where N is the source DCT size, which is 8 for -baseline JPEG. If the /N part is omitted, then M specifies the DCT scaled -size to be applied on the given input. For baseline JPEG this is equivalent -to M/8 scaling, since the source DCT size for baseline JPEG is 8. -Scaling is handy if the image is larger than your screen; also, -.B djpeg -runs much faster when scaling down the output. -.TP -.B \-bmp -Select BMP output format (Windows flavor). 8-bit colormapped format is -emitted if -.B \-colors -or -.B \-grayscale -is specified, or if the JPEG file is gray-scale; otherwise, 24-bit full-color -format is emitted. -.TP -.B \-gif -Select GIF output format. Since GIF does not support more than 256 colors, -.B \-colors 256 -is assumed (unless you specify a smaller number of colors). -.TP -.B \-os2 -Select BMP output format (OS/2 1.x flavor). 8-bit colormapped format is -emitted if -.B \-colors -or -.B \-grayscale -is specified, or if the JPEG file is gray-scale; otherwise, 24-bit full-color -format is emitted. -.TP -.B \-pnm -Select PBMPLUS (PPM/PGM) output format (this is the default format). -PGM is emitted if the JPEG file is gray-scale or if -.B \-grayscale -is specified; otherwise PPM is emitted. -.TP -.B \-rle -Select RLE output format. (Requires URT library.) -.TP -.B \-targa -Select Targa output format. Gray-scale format is emitted if the JPEG file is -gray-scale or if -.B \-grayscale -is specified; otherwise, colormapped format is emitted if -.B \-colors -is specified; otherwise, 24-bit full-color format is emitted. -.PP -Switches for advanced users: -.TP -.B \-dct int -Use integer DCT method (default). -.TP -.B \-dct fast -Use fast integer DCT (less accurate). -.TP -.B \-dct float -Use floating-point DCT method. -The float method is very slightly more accurate than the int method, but is -much slower unless your machine has very fast floating-point hardware. Also -note that results of the floating-point method may vary slightly across -machines, while the integer methods should give the same results everywhere. -The fast integer method is much less accurate than the other two. -.TP -.B \-dither fs -Use Floyd-Steinberg dithering in color quantization. -.TP -.B \-dither ordered -Use ordered dithering in color quantization. -.TP -.B \-dither none -Do not use dithering in color quantization. -By default, Floyd-Steinberg dithering is applied when quantizing colors; this -is slow but usually produces the best results. Ordered dither is a compromise -between speed and quality; no dithering is fast but usually looks awful. Note -that these switches have no effect unless color quantization is being done. -Ordered dither is only available in -.B \-onepass -mode. -.TP -.BI \-map " file" -Quantize to the colors used in the specified image file. This is useful for -producing multiple files with identical color maps, or for forcing a -predefined set of colors to be used. The -.I file -must be a GIF or PPM file. This option overrides -.B \-colors -and -.BR \-onepass . -.TP -.B \-nosmooth -Don't use high-quality upsampling. -.TP -.B \-onepass -Use one-pass instead of two-pass color quantization. The one-pass method is -faster and needs less memory, but it produces a lower-quality image. -.B \-onepass -is ignored unless you also say -.B \-colors -.IR N . -Also, the one-pass method is always used for gray-scale output (the two-pass -method is no improvement then). -.TP -.BI \-maxmemory " N" -Set limit for amount of memory to use in processing large images. Value is -in thousands of bytes, or millions of bytes if "M" is attached to the -number. For example, -.B \-max 4m -selects 4000000 bytes. If more space is needed, temporary files will be used. -.TP -.BI \-outfile " name" -Send output image to the named file, not to standard output. -.TP -.B \-verbose -Enable debug printout. More -.BR \-v 's -give more output. Also, version information is printed at startup. -.TP -.B \-debug -Same as -.BR \-verbose . -.SH EXAMPLES -.LP -This example decompresses the JPEG file foo.jpg, quantizes it to -256 colors, and saves the output in 8-bit BMP format in foo.bmp: -.IP -.B djpeg \-colors 256 \-bmp -.I foo.jpg -.B > -.I foo.bmp -.SH HINTS -To get a quick preview of an image, use the -.B \-grayscale -and/or -.B \-scale -switches. -.B \-grayscale \-scale 1/8 -is the fastest case. -.PP -Several options are available that trade off image quality to gain speed. -.B \-fast -turns on the recommended settings. -.PP -.B \-dct fast -and/or -.B \-nosmooth -gain speed at a small sacrifice in quality. -When producing a color-quantized image, -.B \-onepass \-dither ordered -is fast but much lower quality than the default behavior. -.B \-dither none -may give acceptable results in two-pass mode, but is seldom tolerable in -one-pass mode. -.PP -If you are fortunate enough to have very fast floating point hardware, -\fB\-dct float\fR may be even faster than \fB\-dct fast\fR. But on most -machines \fB\-dct float\fR is slower than \fB\-dct int\fR; in this case it is -not worth using, because its theoretical accuracy advantage is too small to be -significant in practice. -.SH ENVIRONMENT -.TP -.B JPEGMEM -If this environment variable is set, its value is the default memory limit. -The value is specified as described for the -.B \-maxmemory -switch. -.B JPEGMEM -overrides the default value specified when the program was compiled, and -itself is overridden by an explicit -.BR \-maxmemory . -.SH SEE ALSO -.BR cjpeg (1), -.BR jpegtran (1), -.BR rdjpgcom (1), -.BR wrjpgcom (1) -.br -.BR ppm (5), -.BR pgm (5) -.br -Wallace, Gregory K. "The JPEG Still Picture Compression Standard", -Communications of the ACM, April 1991 (vol. 34, no. 4), pp. 30-44. -.SH AUTHOR -Independent JPEG Group -.SH BUGS -To avoid the Unisys LZW patent, -.B djpeg -produces uncompressed GIF files. These are larger than they should be, but -are readable by standard GIF decoders. diff --git a/jpeg/djpeg.c b/jpeg/djpeg.c deleted file mode 100755 index bc544dc..0000000 --- a/jpeg/djpeg.c +++ /dev/null @@ -1,617 +0,0 @@ -/* - * djpeg.c - * - * Copyright (C) 1991-1997, Thomas G. Lane. - * Modified 2009 by Guido Vollbeding. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains a command-line user interface for the JPEG decompressor. - * It should work on any system with Unix- or MS-DOS-style command lines. - * - * Two different command line styles are permitted, depending on the - * compile-time switch TWO_FILE_COMMANDLINE: - * djpeg [options] inputfile outputfile - * djpeg [options] [inputfile] - * In the second style, output is always to standard output, which you'd - * normally redirect to a file or pipe to some other program. Input is - * either from a named file or from standard input (typically redirected). - * The second style is convenient on Unix but is unhelpful on systems that - * don't support pipes. Also, you MUST use the first style if your system - * doesn't do binary I/O to stdin/stdout. - * To simplify script writing, the "-outfile" switch is provided. The syntax - * djpeg [options] -outfile outputfile inputfile - * works regardless of which command line style is used. - */ - -#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ -#include "jversion.h" /* for version message */ - -#include /* to declare isprint() */ - -#ifdef USE_CCOMMAND /* command-line reader for Macintosh */ -#ifdef __MWERKS__ -#include /* Metrowerks needs this */ -#include /* ... and this */ -#endif -#ifdef THINK_C -#include /* Think declares it here */ -#endif -#endif - - -/* Create the add-on message string table. */ - -#define JMESSAGE(code,string) string , - -static const char * const cdjpeg_message_table[] = { -#include "cderror.h" - NULL -}; - - -/* - * This list defines the known output image formats - * (not all of which need be supported by a given version). - * You can change the default output format by defining DEFAULT_FMT; - * indeed, you had better do so if you undefine PPM_SUPPORTED. - */ - -typedef enum { - FMT_BMP, /* BMP format (Windows flavor) */ - FMT_GIF, /* GIF format */ - FMT_OS2, /* BMP format (OS/2 flavor) */ - FMT_PPM, /* PPM/PGM (PBMPLUS formats) */ - FMT_RLE, /* RLE format */ - FMT_TARGA, /* Targa format */ - FMT_TIFF /* TIFF format */ -} IMAGE_FORMATS; - -#ifndef DEFAULT_FMT /* so can override from CFLAGS in Makefile */ -#define DEFAULT_FMT FMT_PPM -#endif - -static IMAGE_FORMATS requested_fmt; - - -/* - * Argument-parsing code. - * The switch parser is designed to be useful with DOS-style command line - * syntax, ie, intermixed switches and file names, where only the switches - * to the left of a given file name affect processing of that file. - * The main program in this file doesn't actually use this capability... - */ - - -static const char * progname; /* program name for error messages */ -static char * outfilename; /* for -outfile switch */ - - -LOCAL(void) -usage (void) -/* complain about bad command line */ -{ - fprintf(stderr, "usage: %s [switches] ", progname); -#ifdef TWO_FILE_COMMANDLINE - fprintf(stderr, "inputfile outputfile\n"); -#else - fprintf(stderr, "[inputfile]\n"); -#endif - - fprintf(stderr, "Switches (names may be abbreviated):\n"); - fprintf(stderr, " -colors N Reduce image to no more than N colors\n"); - fprintf(stderr, " -fast Fast, low-quality processing\n"); - fprintf(stderr, " -grayscale Force grayscale output\n"); -#ifdef IDCT_SCALING_SUPPORTED - fprintf(stderr, " -scale M/N Scale output image by fraction M/N, eg, 1/8\n"); -#endif -#ifdef BMP_SUPPORTED - fprintf(stderr, " -bmp Select BMP output format (Windows style)%s\n", - (DEFAULT_FMT == FMT_BMP ? " (default)" : "")); -#endif -#ifdef GIF_SUPPORTED - fprintf(stderr, " -gif Select GIF output format%s\n", - (DEFAULT_FMT == FMT_GIF ? " (default)" : "")); -#endif -#ifdef BMP_SUPPORTED - fprintf(stderr, " -os2 Select BMP output format (OS/2 style)%s\n", - (DEFAULT_FMT == FMT_OS2 ? " (default)" : "")); -#endif -#ifdef PPM_SUPPORTED - fprintf(stderr, " -pnm Select PBMPLUS (PPM/PGM) output format%s\n", - (DEFAULT_FMT == FMT_PPM ? " (default)" : "")); -#endif -#ifdef RLE_SUPPORTED - fprintf(stderr, " -rle Select Utah RLE output format%s\n", - (DEFAULT_FMT == FMT_RLE ? " (default)" : "")); -#endif -#ifdef TARGA_SUPPORTED - fprintf(stderr, " -targa Select Targa output format%s\n", - (DEFAULT_FMT == FMT_TARGA ? " (default)" : "")); -#endif - fprintf(stderr, "Switches for advanced users:\n"); -#ifdef DCT_ISLOW_SUPPORTED - fprintf(stderr, " -dct int Use integer DCT method%s\n", - (JDCT_DEFAULT == JDCT_ISLOW ? " (default)" : "")); -#endif -#ifdef DCT_IFAST_SUPPORTED - fprintf(stderr, " -dct fast Use fast integer DCT (less accurate)%s\n", - (JDCT_DEFAULT == JDCT_IFAST ? " (default)" : "")); -#endif -#ifdef DCT_FLOAT_SUPPORTED - fprintf(stderr, " -dct float Use floating-point DCT method%s\n", - (JDCT_DEFAULT == JDCT_FLOAT ? " (default)" : "")); -#endif - fprintf(stderr, " -dither fs Use F-S dithering (default)\n"); - fprintf(stderr, " -dither none Don't use dithering in quantization\n"); - fprintf(stderr, " -dither ordered Use ordered dither (medium speed, quality)\n"); -#ifdef QUANT_2PASS_SUPPORTED - fprintf(stderr, " -map FILE Map to colors used in named image file\n"); -#endif - fprintf(stderr, " -nosmooth Don't use high-quality upsampling\n"); -#ifdef QUANT_1PASS_SUPPORTED - fprintf(stderr, " -onepass Use 1-pass quantization (fast, low quality)\n"); -#endif - fprintf(stderr, " -maxmemory N Maximum memory to use (in kbytes)\n"); - fprintf(stderr, " -outfile name Specify name for output file\n"); - fprintf(stderr, " -verbose or -debug Emit debug output\n"); - exit(EXIT_FAILURE); -} - - -LOCAL(int) -parse_switches (j_decompress_ptr cinfo, int argc, char **argv, - int last_file_arg_seen, boolean for_real) -/* Parse optional switches. - * Returns argv[] index of first file-name argument (== argc if none). - * Any file names with indexes <= last_file_arg_seen are ignored; - * they have presumably been processed in a previous iteration. - * (Pass 0 for last_file_arg_seen on the first or only iteration.) - * for_real is FALSE on the first (dummy) pass; we may skip any expensive - * processing. - */ -{ - int argn; - char * arg; - - /* Set up default JPEG parameters. */ - requested_fmt = DEFAULT_FMT; /* set default output file format */ - outfilename = NULL; - cinfo->err->trace_level = 0; - - /* Scan command line options, adjust parameters */ - - for (argn = 1; argn < argc; argn++) { - arg = argv[argn]; - if (*arg != '-') { - /* Not a switch, must be a file name argument */ - if (argn <= last_file_arg_seen) { - outfilename = NULL; /* -outfile applies to just one input file */ - continue; /* ignore this name if previously processed */ - } - break; /* else done parsing switches */ - } - arg++; /* advance past switch marker character */ - - if (keymatch(arg, "bmp", 1)) { - /* BMP output format. */ - requested_fmt = FMT_BMP; - - } else if (keymatch(arg, "colors", 1) || keymatch(arg, "colours", 1) || - keymatch(arg, "quantize", 1) || keymatch(arg, "quantise", 1)) { - /* Do color quantization. */ - int val; - - if (++argn >= argc) /* advance to next argument */ - usage(); - if (sscanf(argv[argn], "%d", &val) != 1) - usage(); - cinfo->desired_number_of_colors = val; - cinfo->quantize_colors = TRUE; - - } else if (keymatch(arg, "dct", 2)) { - /* Select IDCT algorithm. */ - if (++argn >= argc) /* advance to next argument */ - usage(); - if (keymatch(argv[argn], "int", 1)) { - cinfo->dct_method = JDCT_ISLOW; - } else if (keymatch(argv[argn], "fast", 2)) { - cinfo->dct_method = JDCT_IFAST; - } else if (keymatch(argv[argn], "float", 2)) { - cinfo->dct_method = JDCT_FLOAT; - } else - usage(); - - } else if (keymatch(arg, "dither", 2)) { - /* Select dithering algorithm. */ - if (++argn >= argc) /* advance to next argument */ - usage(); - if (keymatch(argv[argn], "fs", 2)) { - cinfo->dither_mode = JDITHER_FS; - } else if (keymatch(argv[argn], "none", 2)) { - cinfo->dither_mode = JDITHER_NONE; - } else if (keymatch(argv[argn], "ordered", 2)) { - cinfo->dither_mode = JDITHER_ORDERED; - } else - usage(); - - } else if (keymatch(arg, "debug", 1) || keymatch(arg, "verbose", 1)) { - /* Enable debug printouts. */ - /* On first -d, print version identification */ - static boolean printed_version = FALSE; - - if (! printed_version) { - fprintf(stderr, "Independent JPEG Group's DJPEG, version %s\n%s\n", - JVERSION, JCOPYRIGHT); - printed_version = TRUE; - } - cinfo->err->trace_level++; - - } else if (keymatch(arg, "fast", 1)) { - /* Select recommended processing options for quick-and-dirty output. */ - cinfo->two_pass_quantize = FALSE; - cinfo->dither_mode = JDITHER_ORDERED; - if (! cinfo->quantize_colors) /* don't override an earlier -colors */ - cinfo->desired_number_of_colors = 216; - cinfo->dct_method = JDCT_FASTEST; - cinfo->do_fancy_upsampling = FALSE; - - } else if (keymatch(arg, "gif", 1)) { - /* GIF output format. */ - requested_fmt = FMT_GIF; - - } else if (keymatch(arg, "grayscale", 2) || keymatch(arg, "greyscale",2)) { - /* Force monochrome output. */ - cinfo->out_color_space = JCS_GRAYSCALE; - - } else if (keymatch(arg, "map", 3)) { - /* Quantize to a color map taken from an input file. */ - if (++argn >= argc) /* advance to next argument */ - usage(); - if (for_real) { /* too expensive to do twice! */ -#ifdef QUANT_2PASS_SUPPORTED /* otherwise can't quantize to supplied map */ - FILE * mapfile; - - if ((mapfile = fopen(argv[argn], READ_BINARY)) == NULL) { - fprintf(stderr, "%s: can't open %s\n", progname, argv[argn]); - exit(EXIT_FAILURE); - } - read_color_map(cinfo, mapfile); - fclose(mapfile); - cinfo->quantize_colors = TRUE; -#else - ERREXIT(cinfo, JERR_NOT_COMPILED); -#endif - } - - } else if (keymatch(arg, "maxmemory", 3)) { - /* Maximum memory in Kb (or Mb with 'm'). */ - long lval; - char ch = 'x'; - - if (++argn >= argc) /* advance to next argument */ - usage(); - if (sscanf(argv[argn], "%ld%c", &lval, &ch) < 1) - usage(); - if (ch == 'm' || ch == 'M') - lval *= 1000L; - cinfo->mem->max_memory_to_use = lval * 1000L; - - } else if (keymatch(arg, "nosmooth", 3)) { - /* Suppress fancy upsampling */ - cinfo->do_fancy_upsampling = FALSE; - - } else if (keymatch(arg, "onepass", 3)) { - /* Use fast one-pass quantization. */ - cinfo->two_pass_quantize = FALSE; - - } else if (keymatch(arg, "os2", 3)) { - /* BMP output format (OS/2 flavor). */ - requested_fmt = FMT_OS2; - - } else if (keymatch(arg, "outfile", 4)) { - /* Set output file name. */ - if (++argn >= argc) /* advance to next argument */ - usage(); - outfilename = argv[argn]; /* save it away for later use */ - - } else if (keymatch(arg, "pnm", 1) || keymatch(arg, "ppm", 1)) { - /* PPM/PGM output format. */ - requested_fmt = FMT_PPM; - - } else if (keymatch(arg, "rle", 1)) { - /* RLE output format. */ - requested_fmt = FMT_RLE; - - } else if (keymatch(arg, "scale", 1)) { - /* Scale the output image by a fraction M/N. */ - if (++argn >= argc) /* advance to next argument */ - usage(); - if (sscanf(argv[argn], "%d/%d", - &cinfo->scale_num, &cinfo->scale_denom) < 1) - usage(); - - } else if (keymatch(arg, "targa", 1)) { - /* Targa output format. */ - requested_fmt = FMT_TARGA; - - } else { - usage(); /* bogus switch */ - } - } - - return argn; /* return index of next arg (file name) */ -} - - -/* - * Marker processor for COM and interesting APPn markers. - * This replaces the library's built-in processor, which just skips the marker. - * We want to print out the marker as text, to the extent possible. - * Note this code relies on a non-suspending data source. - */ - -LOCAL(unsigned int) -jpeg_getc (j_decompress_ptr cinfo) -/* Read next byte */ -{ - struct jpeg_source_mgr * datasrc = cinfo->src; - - if (datasrc->bytes_in_buffer == 0) { - if (! (*datasrc->fill_input_buffer) (cinfo)) - ERREXIT(cinfo, JERR_CANT_SUSPEND); - } - datasrc->bytes_in_buffer--; - return GETJOCTET(*datasrc->next_input_byte++); -} - - -METHODDEF(boolean) -print_text_marker (j_decompress_ptr cinfo) -{ - boolean traceit = (cinfo->err->trace_level >= 1); - INT32 length; - unsigned int ch; - unsigned int lastch = 0; - - length = jpeg_getc(cinfo) << 8; - length += jpeg_getc(cinfo); - length -= 2; /* discount the length word itself */ - - if (traceit) { - if (cinfo->unread_marker == JPEG_COM) - fprintf(stderr, "Comment, length %ld:\n", (long) length); - else /* assume it is an APPn otherwise */ - fprintf(stderr, "APP%d, length %ld:\n", - cinfo->unread_marker - JPEG_APP0, (long) length); - } - - while (--length >= 0) { - ch = jpeg_getc(cinfo); - if (traceit) { - /* Emit the character in a readable form. - * Nonprintables are converted to \nnn form, - * while \ is converted to \\. - * Newlines in CR, CR/LF, or LF form will be printed as one newline. - */ - if (ch == '\r') { - fprintf(stderr, "\n"); - } else if (ch == '\n') { - if (lastch != '\r') - fprintf(stderr, "\n"); - } else if (ch == '\\') { - fprintf(stderr, "\\\\"); - } else if (isprint(ch)) { - putc(ch, stderr); - } else { - fprintf(stderr, "\\%03o", ch); - } - lastch = ch; - } - } - - if (traceit) - fprintf(stderr, "\n"); - - return TRUE; -} - - -/* - * The main program. - */ - -int -main (int argc, char **argv) -{ - struct jpeg_decompress_struct cinfo; - struct jpeg_error_mgr jerr; -#ifdef PROGRESS_REPORT - struct cdjpeg_progress_mgr progress; -#endif - int file_index; - djpeg_dest_ptr dest_mgr = NULL; - FILE * input_file; - FILE * output_file; - JDIMENSION num_scanlines; - - /* On Mac, fetch a command line. */ -#ifdef USE_CCOMMAND - argc = ccommand(&argv); -#endif - - progname = argv[0]; - if (progname == NULL || progname[0] == 0) - progname = "djpeg"; /* in case C library doesn't provide it */ - - /* Initialize the JPEG decompression object with default error handling. */ - cinfo.err = jpeg_std_error(&jerr); - jpeg_create_decompress(&cinfo); - /* Add some application-specific error messages (from cderror.h) */ - jerr.addon_message_table = cdjpeg_message_table; - jerr.first_addon_message = JMSG_FIRSTADDONCODE; - jerr.last_addon_message = JMSG_LASTADDONCODE; - - /* Insert custom marker processor for COM and APP12. - * APP12 is used by some digital camera makers for textual info, - * so we provide the ability to display it as text. - * If you like, additional APPn marker types can be selected for display, - * but don't try to override APP0 or APP14 this way (see libjpeg.doc). - */ - jpeg_set_marker_processor(&cinfo, JPEG_COM, print_text_marker); - jpeg_set_marker_processor(&cinfo, JPEG_APP0+12, print_text_marker); - - /* Now safe to enable signal catcher. */ -#ifdef NEED_SIGNAL_CATCHER - enable_signal_catcher((j_common_ptr) &cinfo); -#endif - - /* Scan command line to find file names. */ - /* It is convenient to use just one switch-parsing routine, but the switch - * values read here are ignored; we will rescan the switches after opening - * the input file. - * (Exception: tracing level set here controls verbosity for COM markers - * found during jpeg_read_header...) - */ - - file_index = parse_switches(&cinfo, argc, argv, 0, FALSE); - -#ifdef TWO_FILE_COMMANDLINE - /* Must have either -outfile switch or explicit output file name */ - if (outfilename == NULL) { - if (file_index != argc-2) { - fprintf(stderr, "%s: must name one input and one output file\n", - progname); - usage(); - } - outfilename = argv[file_index+1]; - } else { - if (file_index != argc-1) { - fprintf(stderr, "%s: must name one input and one output file\n", - progname); - usage(); - } - } -#else - /* Unix style: expect zero or one file name */ - if (file_index < argc-1) { - fprintf(stderr, "%s: only one input file\n", progname); - usage(); - } -#endif /* TWO_FILE_COMMANDLINE */ - - /* Open the input file. */ - if (file_index < argc) { - if ((input_file = fopen(argv[file_index], READ_BINARY)) == NULL) { - fprintf(stderr, "%s: can't open %s\n", progname, argv[file_index]); - exit(EXIT_FAILURE); - } - } else { - /* default input file is stdin */ - input_file = read_stdin(); - } - - /* Open the output file. */ - if (outfilename != NULL) { - if ((output_file = fopen(outfilename, WRITE_BINARY)) == NULL) { - fprintf(stderr, "%s: can't open %s\n", progname, outfilename); - exit(EXIT_FAILURE); - } - } else { - /* default output file is stdout */ - output_file = write_stdout(); - } - -#ifdef PROGRESS_REPORT - start_progress_monitor((j_common_ptr) &cinfo, &progress); -#endif - - /* Specify data source for decompression */ - jpeg_stdio_src(&cinfo, input_file); - - /* Read file header, set default decompression parameters */ - (void) jpeg_read_header(&cinfo, TRUE); - - /* Adjust default decompression parameters by re-parsing the options */ - file_index = parse_switches(&cinfo, argc, argv, 0, TRUE); - - /* Initialize the output module now to let it override any crucial - * option settings (for instance, GIF wants to force color quantization). - */ - switch (requested_fmt) { -#ifdef BMP_SUPPORTED - case FMT_BMP: - dest_mgr = jinit_write_bmp(&cinfo, FALSE); - break; - case FMT_OS2: - dest_mgr = jinit_write_bmp(&cinfo, TRUE); - break; -#endif -#ifdef GIF_SUPPORTED - case FMT_GIF: - dest_mgr = jinit_write_gif(&cinfo); - break; -#endif -#ifdef PPM_SUPPORTED - case FMT_PPM: - dest_mgr = jinit_write_ppm(&cinfo); - break; -#endif -#ifdef RLE_SUPPORTED - case FMT_RLE: - dest_mgr = jinit_write_rle(&cinfo); - break; -#endif -#ifdef TARGA_SUPPORTED - case FMT_TARGA: - dest_mgr = jinit_write_targa(&cinfo); - break; -#endif - default: - ERREXIT(&cinfo, JERR_UNSUPPORTED_FORMAT); - break; - } - dest_mgr->output_file = output_file; - - /* Start decompressor */ - (void) jpeg_start_decompress(&cinfo); - - /* Write output file header */ - (*dest_mgr->start_output) (&cinfo, dest_mgr); - - /* Process data */ - while (cinfo.output_scanline < cinfo.output_height) { - num_scanlines = jpeg_read_scanlines(&cinfo, dest_mgr->buffer, - dest_mgr->buffer_height); - (*dest_mgr->put_pixel_rows) (&cinfo, dest_mgr, num_scanlines); - } - -#ifdef PROGRESS_REPORT - /* Hack: count final pass as done in case finish_output does an extra pass. - * The library won't have updated completed_passes. - */ - progress.pub.completed_passes = progress.pub.total_passes; -#endif - - /* Finish decompression and release memory. - * I must do it in this order because output module has allocated memory - * of lifespan JPOOL_IMAGE; it needs to finish before releasing memory. - */ - (*dest_mgr->finish_output) (&cinfo, dest_mgr); - (void) jpeg_finish_decompress(&cinfo); - jpeg_destroy_decompress(&cinfo); - - /* Close files, if we opened them */ - if (input_file != stdin) - fclose(input_file); - if (output_file != stdout) - fclose(output_file); - -#ifdef PROGRESS_REPORT - end_progress_monitor((j_common_ptr) &cinfo); -#endif - - /* All done. */ - exit(jerr.num_warnings ? EXIT_WARNING : EXIT_SUCCESS); - return 0; /* suppress no-return-value warnings */ -} diff --git a/jpeg/example.c b/jpeg/example.c deleted file mode 100755 index 1d6f6cc..0000000 --- a/jpeg/example.c +++ /dev/null @@ -1,433 +0,0 @@ -/* - * example.c - * - * This file illustrates how to use the IJG code as a subroutine library - * to read or write JPEG image files. You should look at this code in - * conjunction with the documentation file libjpeg.txt. - * - * This code will not do anything useful as-is, but it may be helpful as a - * skeleton for constructing routines that call the JPEG library. - * - * We present these routines in the same coding style used in the JPEG code - * (ANSI function definitions, etc); but you are of course free to code your - * routines in a different style if you prefer. - */ - -#include - -/* - * Include file for users of JPEG library. - * You will need to have included system headers that define at least - * the typedefs FILE and size_t before you can include jpeglib.h. - * (stdio.h is sufficient on ANSI-conforming systems.) - * You may also wish to include "jerror.h". - */ - -#include "jpeglib.h" - -/* - * is used for the optional error recovery mechanism shown in - * the second part of the example. - */ - -#include - - - -/******************** JPEG COMPRESSION SAMPLE INTERFACE *******************/ - -/* This half of the example shows how to feed data into the JPEG compressor. - * We present a minimal version that does not worry about refinements such - * as error recovery (the JPEG code will just exit() if it gets an error). - */ - - -/* - * IMAGE DATA FORMATS: - * - * The standard input image format is a rectangular array of pixels, with - * each pixel having the same number of "component" values (color channels). - * Each pixel row is an array of JSAMPLEs (which typically are unsigned chars). - * If you are working with color data, then the color values for each pixel - * must be adjacent in the row; for example, R,G,B,R,G,B,R,G,B,... for 24-bit - * RGB color. - * - * For this example, we'll assume that this data structure matches the way - * our application has stored the image in memory, so we can just pass a - * pointer to our image buffer. In particular, let's say that the image is - * RGB color and is described by: - */ - -extern JSAMPLE * image_buffer; /* Points to large array of R,G,B-order data */ -extern int image_height; /* Number of rows in image */ -extern int image_width; /* Number of columns in image */ - - -/* - * Sample routine for JPEG compression. We assume that the target file name - * and a compression quality factor are passed in. - */ - -GLOBAL(void) -write_JPEG_file (char * filename, int quality) -{ - /* This struct contains the JPEG compression parameters and pointers to - * working space (which is allocated as needed by the JPEG library). - * It is possible to have several such structures, representing multiple - * compression/decompression processes, in existence at once. We refer - * to any one struct (and its associated working data) as a "JPEG object". - */ - struct jpeg_compress_struct cinfo; - /* This struct represents a JPEG error handler. It is declared separately - * because applications often want to supply a specialized error handler - * (see the second half of this file for an example). But here we just - * take the easy way out and use the standard error handler, which will - * print a message on stderr and call exit() if compression fails. - * Note that this struct must live as long as the main JPEG parameter - * struct, to avoid dangling-pointer problems. - */ - struct jpeg_error_mgr jerr; - /* More stuff */ - FILE * outfile; /* target file */ - JSAMPROW row_pointer[1]; /* pointer to JSAMPLE row[s] */ - int row_stride; /* physical row width in image buffer */ - - /* Step 1: allocate and initialize JPEG compression object */ - - /* We have to set up the error handler first, in case the initialization - * step fails. (Unlikely, but it could happen if you are out of memory.) - * This routine fills in the contents of struct jerr, and returns jerr's - * address which we place into the link field in cinfo. - */ - cinfo.err = jpeg_std_error(&jerr); - /* Now we can initialize the JPEG compression object. */ - jpeg_create_compress(&cinfo); - - /* Step 2: specify data destination (eg, a file) */ - /* Note: steps 2 and 3 can be done in either order. */ - - /* Here we use the library-supplied code to send compressed data to a - * stdio stream. You can also write your own code to do something else. - * VERY IMPORTANT: use "b" option to fopen() if you are on a machine that - * requires it in order to write binary files. - */ - if ((outfile = fopen(filename, "wb")) == NULL) { - fprintf(stderr, "can't open %s\n", filename); - exit(1); - } - jpeg_stdio_dest(&cinfo, outfile); - - /* Step 3: set parameters for compression */ - - /* First we supply a description of the input image. - * Four fields of the cinfo struct must be filled in: - */ - cinfo.image_width = image_width; /* image width and height, in pixels */ - cinfo.image_height = image_height; - cinfo.input_components = 3; /* # of color components per pixel */ - cinfo.in_color_space = JCS_RGB; /* colorspace of input image */ - /* Now use the library's routine to set default compression parameters. - * (You must set at least cinfo.in_color_space before calling this, - * since the defaults depend on the source color space.) - */ - jpeg_set_defaults(&cinfo); - /* Now you can set any non-default parameters you wish to. - * Here we just illustrate the use of quality (quantization table) scaling: - */ - jpeg_set_quality(&cinfo, quality, TRUE /* limit to baseline-JPEG values */); - - /* Step 4: Start compressor */ - - /* TRUE ensures that we will write a complete interchange-JPEG file. - * Pass TRUE unless you are very sure of what you're doing. - */ - jpeg_start_compress(&cinfo, TRUE); - - /* Step 5: while (scan lines remain to be written) */ - /* jpeg_write_scanlines(...); */ - - /* Here we use the library's state variable cinfo.next_scanline as the - * loop counter, so that we don't have to keep track ourselves. - * To keep things simple, we pass one scanline per call; you can pass - * more if you wish, though. - */ - row_stride = image_width * 3; /* JSAMPLEs per row in image_buffer */ - - while (cinfo.next_scanline < cinfo.image_height) { - /* jpeg_write_scanlines expects an array of pointers to scanlines. - * Here the array is only one element long, but you could pass - * more than one scanline at a time if that's more convenient. - */ - row_pointer[0] = & image_buffer[cinfo.next_scanline * row_stride]; - (void) jpeg_write_scanlines(&cinfo, row_pointer, 1); - } - - /* Step 6: Finish compression */ - - jpeg_finish_compress(&cinfo); - /* After finish_compress, we can close the output file. */ - fclose(outfile); - - /* Step 7: release JPEG compression object */ - - /* This is an important step since it will release a good deal of memory. */ - jpeg_destroy_compress(&cinfo); - - /* And we're done! */ -} - - -/* - * SOME FINE POINTS: - * - * In the above loop, we ignored the return value of jpeg_write_scanlines, - * which is the number of scanlines actually written. We could get away - * with this because we were only relying on the value of cinfo.next_scanline, - * which will be incremented correctly. If you maintain additional loop - * variables then you should be careful to increment them properly. - * Actually, for output to a stdio stream you needn't worry, because - * then jpeg_write_scanlines will write all the lines passed (or else exit - * with a fatal error). Partial writes can only occur if you use a data - * destination module that can demand suspension of the compressor. - * (If you don't know what that's for, you don't need it.) - * - * If the compressor requires full-image buffers (for entropy-coding - * optimization or a multi-scan JPEG file), it will create temporary - * files for anything that doesn't fit within the maximum-memory setting. - * (Note that temp files are NOT needed if you use the default parameters.) - * On some systems you may need to set up a signal handler to ensure that - * temporary files are deleted if the program is interrupted. See libjpeg.txt. - * - * Scanlines MUST be supplied in top-to-bottom order if you want your JPEG - * files to be compatible with everyone else's. If you cannot readily read - * your data in that order, you'll need an intermediate array to hold the - * image. See rdtarga.c or rdbmp.c for examples of handling bottom-to-top - * source data using the JPEG code's internal virtual-array mechanisms. - */ - - - -/******************** JPEG DECOMPRESSION SAMPLE INTERFACE *******************/ - -/* This half of the example shows how to read data from the JPEG decompressor. - * It's a bit more refined than the above, in that we show: - * (a) how to modify the JPEG library's standard error-reporting behavior; - * (b) how to allocate workspace using the library's memory manager. - * - * Just to make this example a little different from the first one, we'll - * assume that we do not intend to put the whole image into an in-memory - * buffer, but to send it line-by-line someplace else. We need a one- - * scanline-high JSAMPLE array as a work buffer, and we will let the JPEG - * memory manager allocate it for us. This approach is actually quite useful - * because we don't need to remember to deallocate the buffer separately: it - * will go away automatically when the JPEG object is cleaned up. - */ - - -/* - * ERROR HANDLING: - * - * The JPEG library's standard error handler (jerror.c) is divided into - * several "methods" which you can override individually. This lets you - * adjust the behavior without duplicating a lot of code, which you might - * have to update with each future release. - * - * Our example here shows how to override the "error_exit" method so that - * control is returned to the library's caller when a fatal error occurs, - * rather than calling exit() as the standard error_exit method does. - * - * We use C's setjmp/longjmp facility to return control. This means that the - * routine which calls the JPEG library must first execute a setjmp() call to - * establish the return point. We want the replacement error_exit to do a - * longjmp(). But we need to make the setjmp buffer accessible to the - * error_exit routine. To do this, we make a private extension of the - * standard JPEG error handler object. (If we were using C++, we'd say we - * were making a subclass of the regular error handler.) - * - * Here's the extended error handler struct: - */ - -struct my_error_mgr { - struct jpeg_error_mgr pub; /* "public" fields */ - - jmp_buf setjmp_buffer; /* for return to caller */ -}; - -typedef struct my_error_mgr * my_error_ptr; - -/* - * Here's the routine that will replace the standard error_exit method: - */ - -METHODDEF(void) -my_error_exit (j_common_ptr cinfo) -{ - /* cinfo->err really points to a my_error_mgr struct, so coerce pointer */ - my_error_ptr myerr = (my_error_ptr) cinfo->err; - - /* Always display the message. */ - /* We could postpone this until after returning, if we chose. */ - (*cinfo->err->output_message) (cinfo); - - /* Return control to the setjmp point */ - longjmp(myerr->setjmp_buffer, 1); -} - - -/* - * Sample routine for JPEG decompression. We assume that the source file name - * is passed in. We want to return 1 on success, 0 on error. - */ - - -GLOBAL(int) -read_JPEG_file (char * filename) -{ - /* This struct contains the JPEG decompression parameters and pointers to - * working space (which is allocated as needed by the JPEG library). - */ - struct jpeg_decompress_struct cinfo; - /* We use our private extension JPEG error handler. - * Note that this struct must live as long as the main JPEG parameter - * struct, to avoid dangling-pointer problems. - */ - struct my_error_mgr jerr; - /* More stuff */ - FILE * infile; /* source file */ - JSAMPARRAY buffer; /* Output row buffer */ - int row_stride; /* physical row width in output buffer */ - - /* In this example we want to open the input file before doing anything else, - * so that the setjmp() error recovery below can assume the file is open. - * VERY IMPORTANT: use "b" option to fopen() if you are on a machine that - * requires it in order to read binary files. - */ - - if ((infile = fopen(filename, "rb")) == NULL) { - fprintf(stderr, "can't open %s\n", filename); - return 0; - } - - /* Step 1: allocate and initialize JPEG decompression object */ - - /* We set up the normal JPEG error routines, then override error_exit. */ - cinfo.err = jpeg_std_error(&jerr.pub); - jerr.pub.error_exit = my_error_exit; - /* Establish the setjmp return context for my_error_exit to use. */ - if (setjmp(jerr.setjmp_buffer)) { - /* If we get here, the JPEG code has signaled an error. - * We need to clean up the JPEG object, close the input file, and return. - */ - jpeg_destroy_decompress(&cinfo); - fclose(infile); - return 0; - } - /* Now we can initialize the JPEG decompression object. */ - jpeg_create_decompress(&cinfo); - - /* Step 2: specify data source (eg, a file) */ - - jpeg_stdio_src(&cinfo, infile); - - /* Step 3: read file parameters with jpeg_read_header() */ - - (void) jpeg_read_header(&cinfo, TRUE); - /* We can ignore the return value from jpeg_read_header since - * (a) suspension is not possible with the stdio data source, and - * (b) we passed TRUE to reject a tables-only JPEG file as an error. - * See libjpeg.txt for more info. - */ - - /* Step 4: set parameters for decompression */ - - /* In this example, we don't need to change any of the defaults set by - * jpeg_read_header(), so we do nothing here. - */ - - /* Step 5: Start decompressor */ - - (void) jpeg_start_decompress(&cinfo); - /* We can ignore the return value since suspension is not possible - * with the stdio data source. - */ - - /* We may need to do some setup of our own at this point before reading - * the data. After jpeg_start_decompress() we have the correct scaled - * output image dimensions available, as well as the output colormap - * if we asked for color quantization. - * In this example, we need to make an output work buffer of the right size. - */ - /* JSAMPLEs per row in output buffer */ - row_stride = cinfo.output_width * cinfo.output_components; - /* Make a one-row-high sample array that will go away when done with image */ - buffer = (*cinfo.mem->alloc_sarray) - ((j_common_ptr) &cinfo, JPOOL_IMAGE, row_stride, 1); - - /* Step 6: while (scan lines remain to be read) */ - /* jpeg_read_scanlines(...); */ - - /* Here we use the library's state variable cinfo.output_scanline as the - * loop counter, so that we don't have to keep track ourselves. - */ - while (cinfo.output_scanline < cinfo.output_height) { - /* jpeg_read_scanlines expects an array of pointers to scanlines. - * Here the array is only one element long, but you could ask for - * more than one scanline at a time if that's more convenient. - */ - (void) jpeg_read_scanlines(&cinfo, buffer, 1); - /* Assume put_scanline_someplace wants a pointer and sample count. */ - put_scanline_someplace(buffer[0], row_stride); - } - - /* Step 7: Finish decompression */ - - (void) jpeg_finish_decompress(&cinfo); - /* We can ignore the return value since suspension is not possible - * with the stdio data source. - */ - - /* Step 8: Release JPEG decompression object */ - - /* This is an important step since it will release a good deal of memory. */ - jpeg_destroy_decompress(&cinfo); - - /* After finish_decompress, we can close the input file. - * Here we postpone it until after no more JPEG errors are possible, - * so as to simplify the setjmp error logic above. (Actually, I don't - * think that jpeg_destroy can do an error exit, but why assume anything...) - */ - fclose(infile); - - /* At this point you may want to check to see whether any corrupt-data - * warnings occurred (test whether jerr.pub.num_warnings is nonzero). - */ - - /* And we're done! */ - return 1; -} - - -/* - * SOME FINE POINTS: - * - * In the above code, we ignored the return value of jpeg_read_scanlines, - * which is the number of scanlines actually read. We could get away with - * this because we asked for only one line at a time and we weren't using - * a suspending data source. See libjpeg.txt for more info. - * - * We cheated a bit by calling alloc_sarray() after jpeg_start_decompress(); - * we should have done it beforehand to ensure that the space would be - * counted against the JPEG max_memory setting. In some systems the above - * code would risk an out-of-memory error. However, in general we don't - * know the output image dimensions before jpeg_start_decompress(), unless we - * call jpeg_calc_output_dimensions(). See libjpeg.txt for more about this. - * - * Scanlines are returned in the same order as they appear in the JPEG file, - * which is standardly top-to-bottom. If you must emit data bottom-to-top, - * you can use one of the virtual arrays provided by the JPEG memory manager - * to invert the data. See wrbmp.c for an example. - * - * As with compression, some operating modes may require temporary files. - * On some systems you may need to set up a signal handler to ensure that - * temporary files are deleted if the program is interrupted. See libjpeg.txt. - */ diff --git a/jpeg/filelist.txt b/jpeg/filelist.txt deleted file mode 100755 index 7e05386..0000000 --- a/jpeg/filelist.txt +++ /dev/null @@ -1,215 +0,0 @@ -IJG JPEG LIBRARY: FILE LIST - -Copyright (C) 1994-2009, Thomas G. Lane, Guido Vollbeding. -This file is part of the Independent JPEG Group's software. -For conditions of distribution and use, see the accompanying README file. - - -Here is a road map to the files in the IJG JPEG distribution. The -distribution includes the JPEG library proper, plus two application -programs ("cjpeg" and "djpeg") which use the library to convert JPEG -files to and from some other popular image formats. A third application -"jpegtran" uses the library to do lossless conversion between different -variants of JPEG. There are also two stand-alone applications, -"rdjpgcom" and "wrjpgcom". - - -THE JPEG LIBRARY -================ - -Include files: - -jpeglib.h JPEG library's exported data and function declarations. -jconfig.h Configuration declarations. Note: this file is not present - in the distribution; it is generated during installation. -jmorecfg.h Additional configuration declarations; need not be changed - for a standard installation. -jerror.h Declares JPEG library's error and trace message codes. -jinclude.h Central include file used by all IJG .c files to reference - system include files. -jpegint.h JPEG library's internal data structures. -jdct.h Private declarations for forward & reverse DCT subsystems. -jmemsys.h Private declarations for memory management subsystem. -jversion.h Version information. - -Applications using the library should include jpeglib.h (which in turn -includes jconfig.h and jmorecfg.h). Optionally, jerror.h may be included -if the application needs to reference individual JPEG error codes. The -other include files are intended for internal use and would not normally -be included by an application program. (cjpeg/djpeg/etc do use jinclude.h, -since its function is to improve portability of the whole IJG distribution. -Most other applications will directly include the system include files they -want, and hence won't need jinclude.h.) - - -C source code files: - -These files contain most of the functions intended to be called directly by -an application program: - -jcapimin.c Application program interface: core routines for compression. -jcapistd.c Application program interface: standard compression. -jdapimin.c Application program interface: core routines for decompression. -jdapistd.c Application program interface: standard decompression. -jcomapi.c Application program interface routines common to compression - and decompression. -jcparam.c Compression parameter setting helper routines. -jctrans.c API and library routines for transcoding compression. -jdtrans.c API and library routines for transcoding decompression. - -Compression side of the library: - -jcinit.c Initialization: determines which other modules to use. -jcmaster.c Master control: setup and inter-pass sequencing logic. -jcmainct.c Main buffer controller (preprocessor => JPEG compressor). -jcprepct.c Preprocessor buffer controller. -jccoefct.c Buffer controller for DCT coefficient buffer. -jccolor.c Color space conversion. -jcsample.c Downsampling. -jcdctmgr.c DCT manager (DCT implementation selection & control). -jfdctint.c Forward DCT using slow-but-accurate integer method. -jfdctfst.c Forward DCT using faster, less accurate integer method. -jfdctflt.c Forward DCT using floating-point arithmetic. -jchuff.c Huffman entropy coding. -jcarith.c Arithmetic entropy coding. -jcmarker.c JPEG marker writing. -jdatadst.c Data destination managers for memory and stdio output. - -Decompression side of the library: - -jdmaster.c Master control: determines which other modules to use. -jdinput.c Input controller: controls input processing modules. -jdmainct.c Main buffer controller (JPEG decompressor => postprocessor). -jdcoefct.c Buffer controller for DCT coefficient buffer. -jdpostct.c Postprocessor buffer controller. -jdmarker.c JPEG marker reading. -jdhuff.c Huffman entropy decoding. -jdarith.c Arithmetic entropy decoding. -jddctmgr.c IDCT manager (IDCT implementation selection & control). -jidctint.c Inverse DCT using slow-but-accurate integer method. -jidctfst.c Inverse DCT using faster, less accurate integer method. -jidctflt.c Inverse DCT using floating-point arithmetic. -jdsample.c Upsampling. -jdcolor.c Color space conversion. -jdmerge.c Merged upsampling/color conversion (faster, lower quality). -jquant1.c One-pass color quantization using a fixed-spacing colormap. -jquant2.c Two-pass color quantization using a custom-generated colormap. - Also handles one-pass quantization to an externally given map. -jdatasrc.c Data source managers for memory and stdio input. - -Support files for both compression and decompression: - -jaricom.c Tables for common use in arithmetic entropy encoding and - decoding routines. -jerror.c Standard error handling routines (application replaceable). -jmemmgr.c System-independent (more or less) memory management code. -jutils.c Miscellaneous utility routines. - -jmemmgr.c relies on a system-dependent memory management module. The IJG -distribution includes the following implementations of the system-dependent -module: - -jmemnobs.c "No backing store": assumes adequate virtual memory exists. -jmemansi.c Makes temporary files with ANSI-standard routine tmpfile(). -jmemname.c Makes temporary files with program-generated file names. -jmemdos.c Custom implementation for MS-DOS (16-bit environment only): - can use extended and expanded memory as well as temp files. -jmemmac.c Custom implementation for Apple Macintosh. - -Exactly one of the system-dependent modules should be configured into an -installed JPEG library (see install.txt for hints about which one to use). -On unusual systems you may find it worthwhile to make a special -system-dependent memory manager. - - -Non-C source code files: - -jmemdosa.asm 80x86 assembly code support for jmemdos.c; used only in - MS-DOS-specific configurations of the JPEG library. - - -CJPEG/DJPEG/JPEGTRAN -==================== - -Include files: - -cdjpeg.h Declarations shared by cjpeg/djpeg/jpegtran modules. -cderror.h Additional error and trace message codes for cjpeg et al. -transupp.h Declarations for jpegtran support routines in transupp.c. - -C source code files: - -cjpeg.c Main program for cjpeg. -djpeg.c Main program for djpeg. -jpegtran.c Main program for jpegtran. -cdjpeg.c Utility routines used by all three programs. -rdcolmap.c Code to read a colormap file for djpeg's "-map" switch. -rdswitch.c Code to process some of cjpeg's more complex switches. - Also used by jpegtran. -transupp.c Support code for jpegtran: lossless image manipulations. - -Image file reader modules for cjpeg: - -rdbmp.c BMP file input. -rdgif.c GIF file input (now just a stub). -rdppm.c PPM/PGM file input. -rdrle.c Utah RLE file input. -rdtarga.c Targa file input. - -Image file writer modules for djpeg: - -wrbmp.c BMP file output. -wrgif.c GIF file output (a mere shadow of its former self). -wrppm.c PPM/PGM file output. -wrrle.c Utah RLE file output. -wrtarga.c Targa file output. - - -RDJPGCOM/WRJPGCOM -================= - -C source code files: - -rdjpgcom.c Stand-alone rdjpgcom application. -wrjpgcom.c Stand-alone wrjpgcom application. - -These programs do not depend on the IJG library. They do use -jconfig.h and jinclude.h, only to improve portability. - - -ADDITIONAL FILES -================ - -Documentation (see README for a guide to the documentation files): - -README Master documentation file. -*.txt Other documentation files. -*.1 Documentation in Unix man page format. -change.log Version-to-version change highlights. -example.c Sample code for calling JPEG library. - -Configuration/installation files and programs (see install.txt for more info): - -configure Unix shell script to perform automatic configuration. -configure.ac Source file for use with Autoconf to generate configure. -ltmain.sh Support scripts for configure (from GNU libtool). -config.guess -config.sub -depcomp -missing -install-sh Install shell script for those Unix systems lacking one. -Makefile.in Makefile input for configure. -Makefile.am Source file for use with Automake to generate Makefile.in. -ckconfig.c Program to generate jconfig.h on non-Unix systems. -jconfig.txt Template for making jconfig.h by hand. -mak*.* Sample makefiles for particular systems. -jconfig.* Sample jconfig.h for particular systems. -libjpeg.map Script to generate shared library with versioned symbols. -aclocal.m4 M4 macro definitions for use with Autoconf. -ansi2knr.c De-ANSIfier for pre-ANSI C compilers (courtesy of - L. Peter Deutsch and Aladdin Enterprises). - -Test files (see install.txt for test procedure): - -test*.* Source and comparison files for confidence test. - These are binary image files, NOT text files. diff --git a/jpeg/install-sh b/jpeg/install-sh deleted file mode 100755 index a9244eb..0000000 --- a/jpeg/install-sh +++ /dev/null @@ -1,527 +0,0 @@ -#!/bin/sh -# install - install a program, script, or datafile - -scriptversion=2011-01-19.21; # UTC - -# This originates from X11R5 (mit/util/scripts/install.sh), which was -# later released in X11R6 (xc/config/util/install.sh) with the -# following copyright and license. -# -# Copyright (C) 1994 X Consortium -# -# Permission is hereby granted, free of charge, to any person obtaining a copy -# of this software and associated documentation files (the "Software"), to -# deal in the Software without restriction, including without limitation the -# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or -# sell copies of the Software, and to permit persons to whom the Software is -# furnished to do so, subject to the following conditions: -# -# The above copyright notice and this permission notice shall be included in -# all copies or substantial portions of the Software. -# -# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN -# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- -# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. -# -# Except as contained in this notice, the name of the X Consortium shall not -# be used in advertising or otherwise to promote the sale, use or other deal- -# ings in this Software without prior written authorization from the X Consor- -# tium. -# -# -# FSF changes to this file are in the public domain. -# -# Calling this script install-sh is preferred over install.sh, to prevent -# `make' implicit rules from creating a file called install from it -# when there is no Makefile. -# -# This script is compatible with the BSD install script, but was written -# from scratch. - -nl=' -' -IFS=" "" $nl" - -# set DOITPROG to echo to test this script - -# Don't use :- since 4.3BSD and earlier shells don't like it. -doit=${DOITPROG-} -if test -z "$doit"; then - doit_exec=exec -else - doit_exec=$doit -fi - -# Put in absolute file names if you don't have them in your path; -# or use environment vars. - -chgrpprog=${CHGRPPROG-chgrp} -chmodprog=${CHMODPROG-chmod} -chownprog=${CHOWNPROG-chown} -cmpprog=${CMPPROG-cmp} -cpprog=${CPPROG-cp} -mkdirprog=${MKDIRPROG-mkdir} -mvprog=${MVPROG-mv} -rmprog=${RMPROG-rm} -stripprog=${STRIPPROG-strip} - -posix_glob='?' -initialize_posix_glob=' - test "$posix_glob" != "?" || { - if (set -f) 2>/dev/null; then - posix_glob= - else - posix_glob=: - fi - } -' - -posix_mkdir= - -# Desired mode of installed file. -mode=0755 - -chgrpcmd= -chmodcmd=$chmodprog -chowncmd= -mvcmd=$mvprog -rmcmd="$rmprog -f" -stripcmd= - -src= -dst= -dir_arg= -dst_arg= - -copy_on_change=false -no_target_directory= - -usage="\ -Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE - or: $0 [OPTION]... SRCFILES... DIRECTORY - or: $0 [OPTION]... -t DIRECTORY SRCFILES... - or: $0 [OPTION]... -d DIRECTORIES... - -In the 1st form, copy SRCFILE to DSTFILE. -In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. -In the 4th, create DIRECTORIES. - -Options: - --help display this help and exit. - --version display version info and exit. - - -c (ignored) - -C install only if different (preserve the last data modification time) - -d create directories instead of installing files. - -g GROUP $chgrpprog installed files to GROUP. - -m MODE $chmodprog installed files to MODE. - -o USER $chownprog installed files to USER. - -s $stripprog installed files. - -t DIRECTORY install into DIRECTORY. - -T report an error if DSTFILE is a directory. - -Environment variables override the default commands: - CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG - RMPROG STRIPPROG -" - -while test $# -ne 0; do - case $1 in - -c) ;; - - -C) copy_on_change=true;; - - -d) dir_arg=true;; - - -g) chgrpcmd="$chgrpprog $2" - shift;; - - --help) echo "$usage"; exit $?;; - - -m) mode=$2 - case $mode in - *' '* | *' '* | *' -'* | *'*'* | *'?'* | *'['*) - echo "$0: invalid mode: $mode" >&2 - exit 1;; - esac - shift;; - - -o) chowncmd="$chownprog $2" - shift;; - - -s) stripcmd=$stripprog;; - - -t) dst_arg=$2 - # Protect names problematic for `test' and other utilities. - case $dst_arg in - -* | [=\(\)!]) dst_arg=./$dst_arg;; - esac - shift;; - - -T) no_target_directory=true;; - - --version) echo "$0 $scriptversion"; exit $?;; - - --) shift - break;; - - -*) echo "$0: invalid option: $1" >&2 - exit 1;; - - *) break;; - esac - shift -done - -if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then - # When -d is used, all remaining arguments are directories to create. - # When -t is used, the destination is already specified. - # Otherwise, the last argument is the destination. Remove it from $@. - for arg - do - if test -n "$dst_arg"; then - # $@ is not empty: it contains at least $arg. - set fnord "$@" "$dst_arg" - shift # fnord - fi - shift # arg - dst_arg=$arg - # Protect names problematic for `test' and other utilities. - case $dst_arg in - -* | [=\(\)!]) dst_arg=./$dst_arg;; - esac - done -fi - -if test $# -eq 0; then - if test -z "$dir_arg"; then - echo "$0: no input file specified." >&2 - exit 1 - fi - # It's OK to call `install-sh -d' without argument. - # This can happen when creating conditional directories. - exit 0 -fi - -if test -z "$dir_arg"; then - do_exit='(exit $ret); exit $ret' - trap "ret=129; $do_exit" 1 - trap "ret=130; $do_exit" 2 - trap "ret=141; $do_exit" 13 - trap "ret=143; $do_exit" 15 - - # Set umask so as not to create temps with too-generous modes. - # However, 'strip' requires both read and write access to temps. - case $mode in - # Optimize common cases. - *644) cp_umask=133;; - *755) cp_umask=22;; - - *[0-7]) - if test -z "$stripcmd"; then - u_plus_rw= - else - u_plus_rw='% 200' - fi - cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; - *) - if test -z "$stripcmd"; then - u_plus_rw= - else - u_plus_rw=,u+rw - fi - cp_umask=$mode$u_plus_rw;; - esac -fi - -for src -do - # Protect names problematic for `test' and other utilities. - case $src in - -* | [=\(\)!]) src=./$src;; - esac - - if test -n "$dir_arg"; then - dst=$src - dstdir=$dst - test -d "$dstdir" - dstdir_status=$? - else - - # Waiting for this to be detected by the "$cpprog $src $dsttmp" command - # might cause directories to be created, which would be especially bad - # if $src (and thus $dsttmp) contains '*'. - if test ! -f "$src" && test ! -d "$src"; then - echo "$0: $src does not exist." >&2 - exit 1 - fi - - if test -z "$dst_arg"; then - echo "$0: no destination specified." >&2 - exit 1 - fi - dst=$dst_arg - - # If destination is a directory, append the input filename; won't work - # if double slashes aren't ignored. - if test -d "$dst"; then - if test -n "$no_target_directory"; then - echo "$0: $dst_arg: Is a directory" >&2 - exit 1 - fi - dstdir=$dst - dst=$dstdir/`basename "$src"` - dstdir_status=0 - else - # Prefer dirname, but fall back on a substitute if dirname fails. - dstdir=` - (dirname "$dst") 2>/dev/null || - expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$dst" : 'X\(//\)[^/]' \| \ - X"$dst" : 'X\(//\)$' \| \ - X"$dst" : 'X\(/\)' \| . 2>/dev/null || - echo X"$dst" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q' - ` - - test -d "$dstdir" - dstdir_status=$? - fi - fi - - obsolete_mkdir_used=false - - if test $dstdir_status != 0; then - case $posix_mkdir in - '') - # Create intermediate dirs using mode 755 as modified by the umask. - # This is like FreeBSD 'install' as of 1997-10-28. - umask=`umask` - case $stripcmd.$umask in - # Optimize common cases. - *[2367][2367]) mkdir_umask=$umask;; - .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; - - *[0-7]) - mkdir_umask=`expr $umask + 22 \ - - $umask % 100 % 40 + $umask % 20 \ - - $umask % 10 % 4 + $umask % 2 - `;; - *) mkdir_umask=$umask,go-w;; - esac - - # With -d, create the new directory with the user-specified mode. - # Otherwise, rely on $mkdir_umask. - if test -n "$dir_arg"; then - mkdir_mode=-m$mode - else - mkdir_mode= - fi - - posix_mkdir=false - case $umask in - *[123567][0-7][0-7]) - # POSIX mkdir -p sets u+wx bits regardless of umask, which - # is incompatible with FreeBSD 'install' when (umask & 300) != 0. - ;; - *) - tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ - trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0 - - if (umask $mkdir_umask && - exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1 - then - if test -z "$dir_arg" || { - # Check for POSIX incompatibilities with -m. - # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or - # other-writeable bit of parent directory when it shouldn't. - # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. - ls_ld_tmpdir=`ls -ld "$tmpdir"` - case $ls_ld_tmpdir in - d????-?r-*) different_mode=700;; - d????-?--*) different_mode=755;; - *) false;; - esac && - $mkdirprog -m$different_mode -p -- "$tmpdir" && { - ls_ld_tmpdir_1=`ls -ld "$tmpdir"` - test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" - } - } - then posix_mkdir=: - fi - rmdir "$tmpdir/d" "$tmpdir" - else - # Remove any dirs left behind by ancient mkdir implementations. - rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null - fi - trap '' 0;; - esac;; - esac - - if - $posix_mkdir && ( - umask $mkdir_umask && - $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" - ) - then : - else - - # The umask is ridiculous, or mkdir does not conform to POSIX, - # or it failed possibly due to a race condition. Create the - # directory the slow way, step by step, checking for races as we go. - - case $dstdir in - /*) prefix='/';; - [-=\(\)!]*) prefix='./';; - *) prefix='';; - esac - - eval "$initialize_posix_glob" - - oIFS=$IFS - IFS=/ - $posix_glob set -f - set fnord $dstdir - shift - $posix_glob set +f - IFS=$oIFS - - prefixes= - - for d - do - test X"$d" = X && continue - - prefix=$prefix$d - if test -d "$prefix"; then - prefixes= - else - if $posix_mkdir; then - (umask=$mkdir_umask && - $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break - # Don't fail if two instances are running concurrently. - test -d "$prefix" || exit 1 - else - case $prefix in - *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; - *) qprefix=$prefix;; - esac - prefixes="$prefixes '$qprefix'" - fi - fi - prefix=$prefix/ - done - - if test -n "$prefixes"; then - # Don't fail if two instances are running concurrently. - (umask $mkdir_umask && - eval "\$doit_exec \$mkdirprog $prefixes") || - test -d "$dstdir" || exit 1 - obsolete_mkdir_used=true - fi - fi - fi - - if test -n "$dir_arg"; then - { test -z "$chowncmd" || $doit $chowncmd "$dst"; } && - { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } && - { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false || - test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1 - else - - # Make a couple of temp file names in the proper directory. - dsttmp=$dstdir/_inst.$$_ - rmtmp=$dstdir/_rm.$$_ - - # Trap to clean up those temp files at exit. - trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 - - # Copy the file name to the temp name. - (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") && - - # and set any options; do chmod last to preserve setuid bits. - # - # If any of these fail, we abort the whole thing. If we want to - # ignore errors from any of these, just make sure not to ignore - # errors from the above "$doit $cpprog $src $dsttmp" command. - # - { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } && - { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } && - { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } && - { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } && - - # If -C, don't bother to copy if it wouldn't change the file. - if $copy_on_change && - old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && - new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && - - eval "$initialize_posix_glob" && - $posix_glob set -f && - set X $old && old=:$2:$4:$5:$6 && - set X $new && new=:$2:$4:$5:$6 && - $posix_glob set +f && - - test "$old" = "$new" && - $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1 - then - rm -f "$dsttmp" - else - # Rename the file to the real destination. - $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null || - - # The rename failed, perhaps because mv can't rename something else - # to itself, or perhaps because mv is so ancient that it does not - # support -f. - { - # Now remove or move aside any old file at destination location. - # We try this two ways since rm can't unlink itself on some - # systems and the destination file might be busy for other - # reasons. In this case, the final cleanup might fail but the new - # file should still install successfully. - { - test ! -f "$dst" || - $doit $rmcmd -f "$dst" 2>/dev/null || - { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null && - { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; } - } || - { echo "$0: cannot unlink or rename $dst" >&2 - (exit 1); exit 1 - } - } && - - # Now rename the file to the real destination. - $doit $mvcmd "$dsttmp" "$dst" - } - fi || exit 1 - - trap '' 0 - fi -done - -# Local variables: -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "scriptversion=" -# time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-time-zone: "UTC" -# time-stamp-end: "; # UTC" -# End: diff --git a/jpeg/install.txt b/jpeg/install.txt deleted file mode 100755 index 04bed91..0000000 --- a/jpeg/install.txt +++ /dev/null @@ -1,1096 +0,0 @@ -INSTALLATION INSTRUCTIONS for the Independent JPEG Group's JPEG software - -Copyright (C) 1991-2011, Thomas G. Lane, Guido Vollbeding. -This file is part of the Independent JPEG Group's software. -For conditions of distribution and use, see the accompanying README file. - - -This file explains how to configure and install the IJG software. We have -tried to make this software extremely portable and flexible, so that it can be -adapted to almost any environment. The downside of this decision is that the -installation process is complicated. We have provided shortcuts to simplify -the task on common systems. But in any case, you will need at least a little -familiarity with C programming and program build procedures for your system. - -If you are only using this software as part of a larger program, the larger -program's installation procedure may take care of configuring the IJG code. -For example, Ghostscript's installation script will configure the IJG code. -You don't need to read this file if you just want to compile Ghostscript. - -If you are on a Unix machine, you may not need to read this file at all. -Try doing - ./configure - make - make test -If that doesn't complain, do - make install -(better do "make -n install" first to see if the makefile will put the files -where you want them). Read further if you run into snags or want to customize -the code for your system. - - -TABLE OF CONTENTS ------------------ - -Before you start -Configuring the software: - using the automatic "configure" script - using one of the supplied jconfig and makefile files - by hand -Building the software -Testing the software -Installing the software -Optional stuff -Optimization -Hints for specific systems - - -BEFORE YOU START -================ - -Before installing the software you must unpack the distributed source code. -Since you are reading this file, you have probably already succeeded in this -task. However, there is a potential for error if you needed to convert the -files to the local standard text file format (for example, if you are on -MS-DOS you may have converted LF end-of-line to CR/LF). You must apply -such conversion to all the files EXCEPT those whose names begin with "test". -The test files contain binary data; if you change them in any way then the -self-test will give bad results. - -Please check the last section of this file to see if there are hints for the -specific machine or compiler you are using. - - -CONFIGURING THE SOFTWARE -======================== - -To configure the IJG code for your system, you need to create two files: - * jconfig.h: contains values for system-dependent #define symbols. - * Makefile: controls the compilation process. -(On a non-Unix machine, you may create "project files" or some other -substitute for a Makefile. jconfig.h is needed in any environment.) - -We provide three different ways to generate these files: - * On a Unix system, you can just run the "configure" script. - * We provide sample jconfig files and makefiles for popular machines; - if your machine matches one of the samples, just copy the right sample - files to jconfig.h and Makefile. - * If all else fails, read the instructions below and make your own files. - - -Configuring the software using the automatic "configure" script ---------------------------------------------------------------- - -If you are on a Unix machine, you can just type - ./configure -and let the configure script construct appropriate configuration files. -If you're using "csh" on an old version of System V, you might need to type - sh configure -instead to prevent csh from trying to execute configure itself. -Expect configure to run for a few minutes, particularly on slower machines; -it works by compiling a series of test programs. - -Configure was created with GNU Autoconf and it follows the usual conventions -for GNU configure scripts. It makes a few assumptions that you may want to -override. You can do this by providing optional switches to configure: - -* Configure will build both static and shared libraries, if possible. -If you want to build libjpeg only as a static library, say - ./configure --disable-shared -If you want to build libjpeg only as a shared library, say - ./configure --disable-static -Configure uses GNU libtool to take care of system-dependent shared library -building methods. - -* Configure will use gcc (GNU C compiler) if it's available, otherwise cc. -To force a particular compiler to be selected, use the CC option, for example - ./configure CC='cc' -The same method can be used to include any unusual compiler switches. -For example, on HP-UX you probably want to say - ./configure CC='cc -Aa' -to get HP's compiler to run in ANSI mode. - -* The default CFLAGS setting is "-g" for non-gcc compilers, "-g -O2" for gcc. -You can override this by saying, for example, - ./configure CFLAGS='-O2' -if you want to compile without debugging support. - -* Configure will set up the makefile so that "make install" will install files -into /usr/local/bin, /usr/local/man, etc. You can specify an installation -prefix other than "/usr/local" by giving configure the option "--prefix=PATH". - -* If you don't have a lot of swap space, you may need to enable the IJG -software's internal virtual memory mechanism. To do this, give the option -"--enable-maxmem=N" where N is the default maxmemory limit in megabytes. -This is discussed in more detail under "Selecting a memory manager", below. -You probably don't need to worry about this on reasonably-sized Unix machines, -unless you plan to process very large images. - -Configure has some other features that are useful if you are cross-compiling -or working in a network of multiple machine types; but if you need those -features, you probably already know how to use them. - - -Configuring the software using one of the supplied jconfig and makefile files ------------------------------------------------------------------------------ - -If you have one of these systems, you can just use the provided configuration -files: - -Makefile jconfig file System and/or compiler - -makefile.manx jconfig.manx Amiga, Manx Aztec C -makefile.sas jconfig.sas Amiga, SAS C -makeproj.mac jconfig.mac Apple Macintosh, Metrowerks CodeWarrior -mak*jpeg.st jconfig.st Atari ST/STE/TT, Pure C or Turbo C -makefile.bcc jconfig.bcc MS-DOS or OS/2, Borland C -makefile.dj jconfig.dj MS-DOS, DJGPP (Delorie's port of GNU C) -makefile.mc6 jconfig.mc6 MS-DOS, Microsoft C (16-bit only) -makefile.wat jconfig.wat MS-DOS, OS/2, or Windows NT, Watcom C -makefile.vc jconfig.vc Windows NT/95, MS Visual C++ -make*.vc6 jconfig.vc Windows NT/95, MS Visual C++ 6 -make*.v10 jconfig.vc Windows NT/95, MS Visual C++ 2010 (v10) -makefile.mms jconfig.vms Digital VMS, with MMS software -makefile.vms jconfig.vms Digital VMS, without MMS software - -Copy the proper jconfig file to jconfig.h and the makefile to Makefile (or -whatever your system uses as the standard makefile name). For more info see -the appropriate system-specific hints section near the end of this file. - - -Configuring the software by hand --------------------------------- - -First, generate a jconfig.h file. If you are moderately familiar with C, -the comments in jconfig.txt should be enough information to do this; just -copy jconfig.txt to jconfig.h and edit it appropriately. Otherwise, you may -prefer to use the ckconfig.c program. You will need to compile and execute -ckconfig.c by hand --- we hope you know at least enough to do that. -ckconfig.c may not compile the first try (in fact, the whole idea is for it -to fail if anything is going to). If you get compile errors, fix them by -editing ckconfig.c according to the directions given in ckconfig.c. Once -you get it to run, it will write a suitable jconfig.h file, and will also -print out some advice about which makefile to use. - -You may also want to look at the canned jconfig files, if there is one for a -system similar to yours. - -Second, select a makefile and copy it to Makefile (or whatever your system -uses as the standard makefile name). The most generic makefiles we provide -are - makefile.ansi: if your C compiler supports function prototypes - makefile.unix: if not. -(You have function prototypes if ckconfig.c put "#define HAVE_PROTOTYPES" -in jconfig.h.) You may want to start from one of the other makefiles if -there is one for a system similar to yours. - -Look over the selected Makefile and adjust options as needed. In particular -you may want to change the CC and CFLAGS definitions. For instance, if you -are using GCC, set CC=gcc. If you had to use any compiler switches to get -ckconfig.c to work, make sure the same switches are in CFLAGS. - -If you are on a system that doesn't use makefiles, you'll need to set up -project files (or whatever you do use) to compile all the source files and -link them into executable files cjpeg, djpeg, jpegtran, rdjpgcom, and wrjpgcom. -See the file lists in any of the makefiles to find out which files go into -each program. Note that the provided makefiles all make a "library" file -libjpeg first, but you don't have to do that if you don't want to; the file -lists identify which source files are actually needed for compression, -decompression, or both. As a last resort, you can make a batch script that -just compiles everything and links it all together; makefile.vms is an example -of this (it's for VMS systems that have no make-like utility). - -Here are comments about some specific configuration decisions you'll -need to make: - -Command line style ------------------- - -These programs can use a Unix-like command line style which supports -redirection and piping, like this: - cjpeg inputfile >outputfile - cjpeg outputfile - source program | cjpeg >outputfile -The simpler "two file" command line style is just - cjpeg inputfile outputfile -You may prefer the two-file style, particularly if you don't have pipes. - -You MUST use two-file style on any system that doesn't cope well with binary -data fed through stdin/stdout; this is true for some MS-DOS compilers, for -example. If you're not on a Unix system, it's safest to assume you need -two-file style. (But if your compiler provides either the Posix-standard -fdopen() library routine or a Microsoft-compatible setmode() routine, you -can safely use the Unix command line style, by defining USE_FDOPEN or -USE_SETMODE respectively.) - -To use the two-file style, make jconfig.h say "#define TWO_FILE_COMMANDLINE". - -Selecting a memory manager --------------------------- - -The IJG code is capable of working on images that are too big to fit in main -memory; data is swapped out to temporary files as necessary. However, the -code to do this is rather system-dependent. We provide five different -memory managers: - -* jmemansi.c This version uses the ANSI-standard library routine tmpfile(), - which not all non-ANSI systems have. On some systems - tmpfile() may put the temporary file in a non-optimal - location; if you don't like what it does, use jmemname.c. - -* jmemname.c This version creates named temporary files. For anything - except a Unix machine, you'll need to configure the - select_file_name() routine appropriately; see the comments - near the head of jmemname.c. If you use this version, define - NEED_SIGNAL_CATCHER in jconfig.h to make sure the temp files - are removed if the program is aborted. - -* jmemnobs.c (That stands for No Backing Store :-).) This will compile on - almost any system, but it assumes you have enough main memory - or virtual memory to hold the biggest images you work with. - -* jmemdos.c This should be used with most 16-bit MS-DOS compilers. - See the system-specific notes about MS-DOS for more info. - IMPORTANT: if you use this, define USE_MSDOS_MEMMGR in - jconfig.h, and include the assembly file jmemdosa.asm in the - programs. The supplied makefiles and jconfig files for - 16-bit MS-DOS compilers already do both. - -* jmemmac.c Custom version for Apple Macintosh; see the system-specific - notes for Macintosh for more info. - -To use a particular memory manager, change the SYSDEPMEM variable in your -makefile to equal the corresponding object file name (for example, jmemansi.o -or jmemansi.obj for jmemansi.c). - -If you have plenty of (real or virtual) main memory, just use jmemnobs.c. -"Plenty" means about ten bytes for every pixel in the largest images -you plan to process, so a lot of systems don't meet this criterion. -If yours doesn't, try jmemansi.c first. If that doesn't compile, you'll have -to use jmemname.c; be sure to adjust select_file_name() for local conditions. -You may also need to change unlink() to remove() in close_backing_store(). - -Except with jmemnobs.c or jmemmac.c, you need to adjust the DEFAULT_MAX_MEM -setting to a reasonable value for your system (either by adding a #define for -DEFAULT_MAX_MEM to jconfig.h, or by adding a -D switch to the Makefile). -This value limits the amount of data space the program will attempt to -allocate. Code and static data space isn't counted, so the actual memory -needs for cjpeg or djpeg are typically 100 to 150Kb more than the max-memory -setting. Larger max-memory settings reduce the amount of I/O needed to -process a large image, but too large a value can result in "insufficient -memory" failures. On most Unix machines (and other systems with virtual -memory), just set DEFAULT_MAX_MEM to several million and forget it. At the -other end of the spectrum, for MS-DOS machines you probably can't go much -above 300K to 400K. (On MS-DOS the value refers to conventional memory only. -Extended/expanded memory is handled separately by jmemdos.c.) - - -BUILDING THE SOFTWARE -===================== - -Now you should be able to compile the software. Just say "make" (or -whatever's necessary to start the compilation). Have a cup of coffee. - -Here are some things that could go wrong: - -If your compiler complains about undefined structures, you should be able to -shut it up by putting "#define INCOMPLETE_TYPES_BROKEN" in jconfig.h. - -If you have trouble with missing system include files or inclusion of the -wrong ones, read jinclude.h. This shouldn't happen if you used configure -or ckconfig.c to set up jconfig.h. - -There are a fair number of routines that do not use all of their parameters; -some compilers will issue warnings about this, which you can ignore. There -are also a few configuration checks that may give "unreachable code" warnings. -Any other warning deserves investigation. - -If you don't have a getenv() library routine, define NO_GETENV. - -Also see the system-specific hints, below. - - -TESTING THE SOFTWARE -==================== - -As a quick test of functionality we've included a small sample image in -several forms: - testorig.jpg Starting point for the djpeg tests. - testimg.ppm The output of djpeg testorig.jpg - testimg.bmp The output of djpeg -bmp -colors 256 testorig.jpg - testimg.jpg The output of cjpeg testimg.ppm - testprog.jpg Progressive-mode equivalent of testorig.jpg. - testimgp.jpg The output of cjpeg -progressive -optimize testimg.ppm -(The first- and second-generation .jpg files aren't identical since the -default compression parameters are lossy.) If you can generate duplicates -of the testimg* files then you probably have working programs. - -With most of the makefiles, "make test" will perform the necessary -comparisons. - -If you're using a makefile that doesn't provide the test option, run djpeg -and cjpeg by hand and compare the output files to testimg* with whatever -binary file comparison tool you have. The files should be bit-for-bit -identical. - -If the programs complain "MAX_ALLOC_CHUNK is wrong, please fix", then you -need to reduce MAX_ALLOC_CHUNK to a value that fits in type size_t. -Try adding "#define MAX_ALLOC_CHUNK 65520L" to jconfig.h. A less likely -configuration error is "ALIGN_TYPE is wrong, please fix": defining ALIGN_TYPE -as long should take care of that one. - -If the cjpeg test run fails with "Missing Huffman code table entry", it's a -good bet that you needed to define RIGHT_SHIFT_IS_UNSIGNED. Go back to the -configuration step and run ckconfig.c. (This is a good plan for any other -test failure, too.) - -If you are using Unix (one-file) command line style on a non-Unix system, -it's a good idea to check that binary I/O through stdin/stdout actually -works. You should get the same results from "djpeg out.ppm" -as from "djpeg -outfile out.ppm testorig.jpg". Note that the makefiles all -use the latter style and therefore do not exercise stdin/stdout! If this -check fails, try recompiling with USE_SETMODE or USE_FDOPEN defined. -If it still doesn't work, better use two-file style. - -If you chose a memory manager other than jmemnobs.c, you should test that -temporary-file usage works. Try "djpeg -bmp -colors 256 -max 0 testorig.jpg" -and make sure its output matches testimg.bmp. If you have any really large -images handy, try compressing them with -optimize and/or decompressing with --colors 256 to make sure your DEFAULT_MAX_MEM setting is not too large. - -NOTE: this is far from an exhaustive test of the JPEG software; some modules, -such as 1-pass color quantization, are not exercised at all. It's just a -quick test to give you some confidence that you haven't missed something -major. - - -INSTALLING THE SOFTWARE -======================= - -Once you're done with the above steps, you can install the software by -copying the executable files (cjpeg, djpeg, jpegtran, rdjpgcom, and wrjpgcom) -to wherever you normally install programs. On Unix systems, you'll also want -to put the man pages (cjpeg.1, djpeg.1, jpegtran.1, rdjpgcom.1, wrjpgcom.1) -in the man-page directory. The pre-fab makefiles don't support this step -since there's such a wide variety of installation procedures on different -systems. - -If you generated a Makefile with the "configure" script, you can just say - make install -to install the programs and their man pages into the standard places. -(You'll probably need to be root to do this.) We recommend first saying - make -n install -to see where configure thought the files should go. You may need to edit -the Makefile, particularly if your system's conventions for man page -filenames don't match what configure expects. - -If you want to install the IJG library itself, for use in compiling other -programs besides ours, then you need to put the four include files - jpeglib.h jerror.h jconfig.h jmorecfg.h -into your include-file directory, and put the library file libjpeg.a -(extension may vary depending on system) wherever library files go. -If you generated a Makefile with "configure", it will do what it thinks -is the right thing if you say - make install-lib - - -OPTIONAL STUFF -============== - -Progress monitor: - -If you like, you can #define PROGRESS_REPORT (in jconfig.h) to enable display -of percent-done progress reports. The routine provided in cdjpeg.c merely -prints percentages to stderr, but you can customize it to do something -fancier. - -Utah RLE file format support: - -We distribute the software with support for RLE image files (Utah Raster -Toolkit format) disabled, because the RLE support won't compile without the -Utah library. If you have URT version 3.1 or later, you can enable RLE -support as follows: - 1. #define RLE_SUPPORTED in jconfig.h. - 2. Add a -I option to CFLAGS in the Makefile for the directory - containing the URT .h files (typically the "include" - subdirectory of the URT distribution). - 3. Add -L... -lrle to LDLIBS in the Makefile, where ... specifies - the directory containing the URT "librle.a" file (typically the - "lib" subdirectory of the URT distribution). - -Support for 12-bit-deep pixel data: - -The JPEG standard allows either 8-bit or 12-bit data precision. (For color, -this means 8 or 12 bits per channel, of course.) If you need to work with -deeper than 8-bit data, you can compile the IJG code for 12-bit operation. -To do so: - 1. In jmorecfg.h, define BITS_IN_JSAMPLE as 12 rather than 8. - 2. In jconfig.h, undefine BMP_SUPPORTED, RLE_SUPPORTED, and TARGA_SUPPORTED, - because the code for those formats doesn't handle 12-bit data and won't - even compile. (The PPM code does work, as explained below. The GIF - code works too; it scales 8-bit GIF data to and from 12-bit depth - automatically.) - 3. Compile. Don't expect "make test" to pass, since the supplied test - files are for 8-bit data. - -Currently, 12-bit support does not work on 16-bit-int machines. - -Note that a 12-bit version will not read 8-bit JPEG files, nor vice versa; -so you'll want to keep around a regular 8-bit compilation as well. -(Run-time selection of data depth, to allow a single copy that does both, -is possible but would probably slow things down considerably; it's very low -on our to-do list.) - -The PPM reader (rdppm.c) can read 12-bit data from either text-format or -binary-format PPM and PGM files. Binary-format PPM/PGM files which have a -maxval greater than 255 are assumed to use 2 bytes per sample, MSB first -(big-endian order). As of early 1995, 2-byte binary format is not -officially supported by the PBMPLUS library, but it is expected that a -future release of PBMPLUS will support it. Note that the PPM reader will -read files of any maxval regardless of the BITS_IN_JSAMPLE setting; incoming -data is automatically rescaled to either maxval=255 or maxval=4095 as -appropriate for the cjpeg bit depth. - -The PPM writer (wrppm.c) will normally write 2-byte binary PPM or PGM -format, maxval 4095, when compiled with BITS_IN_JSAMPLE=12. Since this -format is not yet widely supported, you can disable it by compiling wrppm.c -with PPM_NORAWWORD defined; then the data is scaled down to 8 bits to make a -standard 1-byte/sample PPM or PGM file. (Yes, this means still another copy -of djpeg to keep around. But hopefully you won't need it for very long. -Poskanzer's supposed to get that new PBMPLUS release out Real Soon Now.) - -Of course, if you are working with 12-bit data, you probably have it stored -in some other, nonstandard format. In that case you'll probably want to -write your own I/O modules to read and write your format. - -Note that a 12-bit version of cjpeg always runs in "-optimize" mode, in -order to generate valid Huffman tables. This is necessary because our -default Huffman tables only cover 8-bit data. - -Removing code: - -If you need to make a smaller version of the JPEG software, some optional -functions can be removed at compile time. See the xxx_SUPPORTED #defines in -jconfig.h and jmorecfg.h. If at all possible, we recommend that you leave in -decoder support for all valid JPEG files, to ensure that you can read anyone's -output. Taking out support for image file formats that you don't use is the -most painless way to make the programs smaller. Another possibility is to -remove some of the DCT methods: in particular, the "IFAST" method may not be -enough faster than the others to be worth keeping on your machine. (If you -do remove ISLOW or IFAST, be sure to redefine JDCT_DEFAULT or JDCT_FASTEST -to a supported method, by adding a #define in jconfig.h.) - - -OPTIMIZATION -============ - -Unless you own a Cray, you'll probably be interested in making the JPEG -software go as fast as possible. This section covers some machine-dependent -optimizations you may want to try. We suggest that before trying any of -this, you first get the basic installation to pass the self-test step. -Repeat the self-test after any optimization to make sure that you haven't -broken anything. - -The integer DCT routines perform a lot of multiplications. These -multiplications must yield 32-bit results, but none of their input values -are more than 16 bits wide. On many machines, notably the 680x0 and 80x86 -CPUs, a 16x16=>32 bit multiply instruction is faster than a full 32x32=>32 -bit multiply. Unfortunately there is no portable way to specify such a -multiplication in C, but some compilers can generate one when you use the -right combination of casts. See the MULTIPLYxxx macro definitions in -jdct.h. If your compiler makes "int" be 32 bits and "short" be 16 bits, -defining SHORTxSHORT_32 is fairly likely to work. When experimenting with -alternate definitions, be sure to test not only whether the code still works -(use the self-test), but also whether it is actually faster --- on some -compilers, alternate definitions may compute the right answer, yet be slower -than the default. Timing cjpeg on a large PGM (grayscale) input file is the -best way to check this, as the DCT will be the largest fraction of the runtime -in that mode. (Note: some of the distributed compiler-specific jconfig files -already contain #define switches to select appropriate MULTIPLYxxx -definitions.) - -If your machine has sufficiently fast floating point hardware, you may find -that the float DCT method is faster than the integer DCT methods, even -after tweaking the integer multiply macros. In that case you may want to -make the float DCT be the default method. (The only objection to this is -that float DCT results may vary slightly across machines.) To do that, add -"#define JDCT_DEFAULT JDCT_FLOAT" to jconfig.h. Even if you don't change -the default, you should redefine JDCT_FASTEST, which is the method selected -by djpeg's -fast switch. Don't forget to update the documentation files -(usage.txt and/or cjpeg.1, djpeg.1) to agree with what you've done. - -If access to "short" arrays is slow on your machine, it may be a win to -define type JCOEF as int rather than short. This will cost a good deal of -memory though, particularly in some multi-pass modes, so don't do it unless -you have memory to burn and short is REALLY slow. - -If your compiler can compile function calls in-line, make sure the INLINE -macro in jmorecfg.h is defined as the keyword that marks a function -inline-able. Some compilers have a switch that tells the compiler to inline -any function it thinks is profitable (e.g., -finline-functions for gcc). -Enabling such a switch is likely to make the compiled code bigger but faster. - -In general, it's worth trying the maximum optimization level of your compiler, -and experimenting with any optional optimizations such as loop unrolling. -(Unfortunately, far too many compilers have optimizer bugs ... be prepared to -back off if the code fails self-test.) If you do any experimentation along -these lines, please report the optimal settings to jpeg-info@jpegclub.org so -we can mention them in future releases. Be sure to specify your machine and -compiler version. - - -HINTS FOR SPECIFIC SYSTEMS -========================== - -We welcome reports on changes needed for systems not mentioned here. Submit -'em to jpeg-info@jpegclub.org. Also, if configure or ckconfig.c is wrong -about how to configure the JPEG software for your system, please let us know. - - -Acorn RISC OS: - -(Thanks to Simon Middleton for these hints on compiling with Desktop C.) -After renaming the files according to Acorn conventions, take a copy of -makefile.ansi, change all occurrences of 'libjpeg.a' to 'libjpeg.o' and -change these definitions as indicated: - -CFLAGS= -throwback -IC: -Wn -LDLIBS=C:o.Stubs -SYSDEPMEM=jmemansi.o -LN=Link -AR=LibFile -c -o - -Also add a new line '.c.o:; $(cc) $< $(cflags) -c -o $@'. Remove the -lines '$(RM) libjpeg.o' and '$(AR2) libjpeg.o' and the 'jconfig.h' -dependency section. - -Copy jconfig.txt to jconfig.h. Edit jconfig.h to define TWO_FILE_COMMANDLINE -and CHAR_IS_UNSIGNED. - -Run the makefile using !AMU not !Make. If you want to use the 'clean' and -'test' makefile entries then you will have to fiddle with the syntax a bit -and rename the test files. - - -Amiga: - -SAS C 6.50 reportedly is too buggy to compile the IJG code properly. -A patch to update to 6.51 is available from SAS or AmiNet FTP sites. - -The supplied config files are set up to use jmemname.c as the memory -manager, with temporary files being created on the device named by -"JPEGTMP:". - - -Atari ST/STE/TT: - -Copy the project files makcjpeg.st, makdjpeg.st, maktjpeg.st, and makljpeg.st -to cjpeg.prj, djpeg.prj, jpegtran.prj, and libjpeg.prj respectively. The -project files should work as-is with Pure C. For Turbo C, change library -filenames "pc..." to "tc..." in each project file. Note that libjpeg.prj -selects jmemansi.c as the recommended memory manager. You'll probably want to -adjust the DEFAULT_MAX_MEM setting --- you want it to be a couple hundred K -less than your normal free memory. Put "#define DEFAULT_MAX_MEM nnnn" into -jconfig.h to do this. - -To use the 68881/68882 coprocessor for the floating point DCT, add the -compiler option "-8" to the project files and replace pcfltlib.lib with -pc881lib.lib in cjpeg.prj and djpeg.prj. Or if you don't have a -coprocessor, you may prefer to remove the float DCT code by undefining -DCT_FLOAT_SUPPORTED in jmorecfg.h (since without a coprocessor, the float -code will be too slow to be useful). In that case, you can delete -pcfltlib.lib from the project files. - -Note that you must make libjpeg.lib before making cjpeg.ttp, djpeg.ttp, -or jpegtran.ttp. You'll have to perform the self-test by hand. - -We haven't bothered to include project files for rdjpgcom and wrjpgcom. -Those source files should just be compiled by themselves; they don't -depend on the JPEG library. You can use the default.prj project file -of the Pure C distribution to make the programs. - -There is a bug in some older versions of the Turbo C library which causes the -space used by temporary files created with "tmpfile()" not to be freed after -an abnormal program exit. If you check your disk afterwards, you will find -cluster chains that are allocated but not used by a file. This should not -happen in cjpeg/djpeg/jpegtran, since we enable a signal catcher to explicitly -close temp files before exiting. But if you use the JPEG library with your -own code, be sure to supply a signal catcher, or else use a different -system-dependent memory manager. - - -Cray: - -Should you be so fortunate as to be running JPEG on a Cray YMP, there is a -compiler bug in old versions of Cray's Standard C (prior to 3.1). If you -still have an old compiler, you'll need to insert a line reading -"#pragma novector" just before the loop - for (i = 1; i <= (int) htbl->bits[l]; i++) - huffsize[p++] = (char) l; -in fix_huff_tbl (in V5beta1, line 204 of jchuff.c and line 176 of jdhuff.c). -[This bug may or may not still occur with the current IJG code, but it's -probably a dead issue anyway...] - - -HP-UX: - -If you have HP-UX 7.05 or later with the "software development" C compiler, -you should run the compiler in ANSI mode. If using the configure script, -say - ./configure CC='cc -Aa' -(or -Ae if you prefer). If configuring by hand, use makefile.ansi and add -"-Aa" to the CFLAGS line in the makefile. - -If you have a pre-7.05 system, or if you are using the non-ANSI C compiler -delivered with a minimum HP-UX system, then you must use makefile.unix -(and do NOT add -Aa); or just run configure without the CC option. - -On HP 9000 series 800 machines, the HP C compiler is buggy in revisions prior -to A.08.07. If you get complaints about "not a typedef name", you'll have to -use makefile.unix, or run configure without the CC option. - - -Macintosh, generic comments: - -The supplied user-interface files (cjpeg.c, djpeg.c, etc) are set up to -provide a Unix-style command line interface. You can use this interface on -the Mac by means of the ccommand() library routine provided by Metrowerks -CodeWarrior or Think C. This is only appropriate for testing the library, -however; to make a user-friendly equivalent of cjpeg/djpeg you'd really want -to develop a Mac-style user interface. There isn't a complete example -available at the moment, but there are some helpful starting points: -1. Sam Bushell's free "To JPEG" applet provides drag-and-drop conversion to -JPEG under System 7 and later. This only illustrates how to use the -compression half of the library, but it does a very nice job of that part. -The CodeWarrior source code is available from http://www.pobox.com/~jsam. -2. Jim Brunner prepared a Mac-style user interface for both compression and -decompression. Unfortunately, it hasn't been updated since IJG v4, and -the library's API has changed considerably since then. Still it may be of -some help, particularly as a guide to compiling the IJG code under Think C. -Jim's code is available from the Info-Mac archives, at sumex-aim.stanford.edu -or mirrors thereof; see file /info-mac/dev/src/jpeg-convert-c.hqx. - -jmemmac.c is the recommended memory manager back end for Macintosh. It uses -NewPtr/DisposePtr instead of malloc/free, and has a Mac-specific -implementation of jpeg_mem_available(). It also creates temporary files that -follow Mac conventions. (That part of the code relies on System-7-or-later OS -functions. See the comments in jmemmac.c if you need to run it on System 6.) -NOTE that USE_MAC_MEMMGR must be defined in jconfig.h to use jmemmac.c. - -You can also use jmemnobs.c, if you don't care about handling images larger -than available memory. If you use any memory manager back end other than -jmemmac.c, we recommend replacing "malloc" and "free" by "NewPtr" and -"DisposePtr", because Mac C libraries often have peculiar implementations of -malloc/free. (For instance, free() may not return the freed space to the -Mac Memory Manager. This is undesirable for the IJG code because jmemmgr.c -already clumps space requests.) - - -Macintosh, Metrowerks CodeWarrior: - -The Unix-command-line-style interface can be used by defining USE_CCOMMAND. -You'll also need to define TWO_FILE_COMMANDLINE to avoid stdin/stdout. -This means that when using the cjpeg/djpeg programs, you'll have to type the -input and output file names in the "Arguments" text-edit box, rather than -using the file radio buttons. (Perhaps USE_FDOPEN or USE_SETMODE would -eliminate the problem, but I haven't heard from anyone who's tried it.) - -On 680x0 Macs, Metrowerks defines type "double" as a 10-byte IEEE extended -float. jmemmgr.c won't like this: it wants sizeof(ALIGN_TYPE) to be a power -of 2. Add "#define ALIGN_TYPE long" to jconfig.h to eliminate the complaint. - -The supplied configuration file jconfig.mac can be used for your jconfig.h; -it includes all the recommended symbol definitions. If you have AppleScript -installed, you can run the supplied script makeproj.mac to create CodeWarrior -project files for the library and the testbed applications, then build the -library and applications. (Thanks to Dan Sears and Don Agro for this nifty -hack, which saves us from trying to maintain CodeWarrior project files as part -of the IJG distribution...) - - -Macintosh, Think C: - -The documentation in Jim Brunner's "JPEG Convert" source code (see above) -includes detailed build instructions for Think C; it's probably somewhat -out of date for the current release, but may be helpful. - -If you want to build the minimal command line version, proceed as follows. -You'll have to prepare project files for the programs; we don't include any -in the distribution since they are not text files. Use the file lists in -any of the supplied makefiles as a guide. Also add the ANSI and Unix C -libraries in a separate segment. You may need to divide the JPEG files into -more than one segment; we recommend dividing compression and decompression -modules. Define USE_CCOMMAND in jconfig.h so that the ccommand() routine is -called. You must also define TWO_FILE_COMMANDLINE because stdin/stdout -don't handle binary data correctly. - -On 680x0 Macs, Think C defines type "double" as a 12-byte IEEE extended float. -jmemmgr.c won't like this: it wants sizeof(ALIGN_TYPE) to be a power of 2. -Add "#define ALIGN_TYPE long" to jconfig.h to eliminate the complaint. - -jconfig.mac should work as a jconfig.h configuration file for Think C, -but the makeproj.mac AppleScript script is specific to CodeWarrior. Sorry. - - -MIPS R3000: - -MIPS's cc version 1.31 has a rather nasty optimization bug. Don't use -O -if you have that compiler version. (Use "cc -V" to check the version.) -Note that the R3000 chip is found in workstations from DEC and others. - - -MS-DOS, generic comments for 16-bit compilers: - -The IJG code is designed to work well in 80x86 "small" or "medium" memory -models (i.e., data pointers are 16 bits unless explicitly declared "far"; -code pointers can be either size). You may be able to use small model to -compile cjpeg or djpeg by itself, but you will probably have to use medium -model for any larger application. This won't make much difference in -performance. You *will* take a noticeable performance hit if you use a -large-data memory model, and you should avoid "huge" model if at all -possible. Be sure that NEED_FAR_POINTERS is defined in jconfig.h if you use -a small-data memory model; be sure it is NOT defined if you use a large-data -model. (The supplied makefiles and jconfig files for Borland and Microsoft C -compile in medium model and define NEED_FAR_POINTERS.) - -The DOS-specific memory manager, jmemdos.c, should be used if possible. -It needs some assembly-code routines which are in jmemdosa.asm; make sure -your makefile assembles that file and includes it in the library. If you -don't have a suitable assembler, you can get pre-assembled object files for -jmemdosa by FTP from ftp.uu.net:/graphics/jpeg/jdosaobj.zip. (DOS-oriented -distributions of the IJG source code often include these object files.) - -When using jmemdos.c, jconfig.h must define USE_MSDOS_MEMMGR and must set -MAX_ALLOC_CHUNK to less than 64K (65520L is a typical value). If your -C library's far-heap malloc() can't allocate blocks that large, reduce -MAX_ALLOC_CHUNK to whatever it can handle. - -If you can't use jmemdos.c for some reason --- for example, because you -don't have an assembler to assemble jmemdosa.asm --- you'll have to fall -back to jmemansi.c or jmemname.c. You'll probably still need to set -MAX_ALLOC_CHUNK in jconfig.h, because most DOS C libraries won't malloc() -more than 64K at a time. IMPORTANT: if you use jmemansi.c or jmemname.c, -you will have to compile in a large-data memory model in order to get the -right stdio library. Too bad. - -wrjpgcom needs to be compiled in large model, because it malloc()s a 64KB -work area to hold the comment text. If your C library's malloc can't -handle that, reduce MAX_COM_LENGTH as necessary in wrjpgcom.c. - -Most MS-DOS compilers treat stdin/stdout as text files, so you must use -two-file command line style. But if your compiler has either fdopen() or -setmode(), you can use one-file style if you like. To do this, define -USE_SETMODE or USE_FDOPEN so that stdin/stdout will be set to binary mode. -(USE_SETMODE seems to work with more DOS compilers than USE_FDOPEN.) You -should test that I/O through stdin/stdout produces the same results as I/O -to explicitly named files... the "make test" procedures in the supplied -makefiles do NOT use stdin/stdout. - - -MS-DOS, generic comments for 32-bit compilers: - -None of the above comments about memory models apply if you are using a -32-bit flat-memory-space environment, such as DJGPP or Watcom C. (And you -should use one if you have it, as performance will be much better than -8086-compatible code!) For flat-memory-space compilers, do NOT define -NEED_FAR_POINTERS, and do NOT use jmemdos.c. Use jmemnobs.c if the -environment supplies adequate virtual memory, otherwise use jmemansi.c or -jmemname.c. - -You'll still need to be careful about binary I/O through stdin/stdout. -See the last paragraph of the previous section. - - -MS-DOS, Borland C: - -Be sure to convert all the source files to DOS text format (CR/LF newlines). -Although Borland C will often work OK with unmodified Unix (LF newlines) -source files, sometimes it will give bogus compile errors. -"Illegal character '#'" is the most common such error. (This is true with -Borland C 3.1, but perhaps is fixed in newer releases.) - -If you want one-file command line style, just undefine TWO_FILE_COMMANDLINE. -jconfig.bcc already includes #define USE_SETMODE to make this work. -(fdopen does not work correctly.) - - -MS-DOS, Microsoft C: - -makefile.mc6 works with Microsoft C, DOS Visual C++, etc. It should only -be used if you want to build a 16-bit (small or medium memory model) program. - -If you want one-file command line style, just undefine TWO_FILE_COMMANDLINE. -jconfig.mc6 already includes #define USE_SETMODE to make this work. -(fdopen does not work correctly.) - -Note that this makefile assumes that the working copy of itself is called -"makefile". If you want to call it something else, say "makefile.mak", -be sure to adjust the dependency line that reads "$(RFILE) : makefile". -Otherwise the make will fail because it doesn't know how to create "makefile". -Worse, some releases of Microsoft's make utilities give an incorrect error -message in this situation. - -Old versions of MS C fail with an "out of macro expansion space" error -because they can't cope with the macro TRACEMS8 (defined in jerror.h). -If this happens to you, the easiest solution is to change TRACEMS8 to -expand to nothing. You'll lose the ability to dump out JPEG coefficient -tables with djpeg -debug -debug, but at least you can compile. - -Original MS C 6.0 is very buggy; it compiles incorrect code unless you turn -off optimization entirely (remove -O from CFLAGS). 6.00A is better, but it -still generates bad code if you enable loop optimizations (-Ol or -Ox). - -MS C 8.0 crashes when compiling jquant1.c with optimization switch /Oo ... -which is on by default. To work around this bug, compile that one file -with /Oo-. - - -Microsoft Windows (all versions), generic comments: - -Some Windows system include files define typedef boolean as "unsigned char". -The IJG code also defines typedef boolean, but we make it "int" by default. -This doesn't affect the IJG programs because we don't import those Windows -include files. But if you use the JPEG library in your own program, and some -of your program's files import one definition of boolean while some import the -other, you can get all sorts of mysterious problems. A good preventive step -is to make the IJG library use "unsigned char" for boolean. To do that, -add something like this to your jconfig.h file: - /* Define "boolean" as unsigned char, not int, per Windows custom */ - #ifndef __RPCNDR_H__ /* don't conflict if rpcndr.h already read */ - typedef unsigned char boolean; - #endif - #define HAVE_BOOLEAN /* prevent jmorecfg.h from redefining it */ -(This is already in jconfig.vc, by the way.) - -windef.h contains the declarations - #define far - #define FAR far -Since jmorecfg.h tries to define FAR as empty, you may get a compiler -warning if you include both jpeglib.h and windef.h (which windows.h -includes). To suppress the warning, you can put "#ifndef FAR"/"#endif" -around the line "#define FAR" in jmorecfg.h. -(Something like this is already in jmorecfg.h, by the way.) - -When using the library in a Windows application, you will almost certainly -want to modify or replace the error handler module jerror.c, since our -default error handler does a couple of inappropriate things: - 1. it tries to write error and warning messages on stderr; - 2. in event of a fatal error, it exits by calling exit(). - -A simple stopgap solution for problem 1 is to replace the line - fprintf(stderr, "%s\n", buffer); -(in output_message in jerror.c) with - MessageBox(GetActiveWindow(),buffer,"JPEG Error",MB_OK|MB_ICONERROR); -It's highly recommended that you at least do that much, since otherwise -error messages will disappear into nowhere. (Beginning with IJG v6b, this -code is already present in jerror.c; just define USE_WINDOWS_MESSAGEBOX in -jconfig.h to enable it.) - -The proper solution for problem 2 is to return control to your calling -application after a library error. This can be done with the setjmp/longjmp -technique discussed in libjpeg.txt and illustrated in example.c. (NOTE: -some older Windows C compilers provide versions of setjmp/longjmp that -don't actually work under Windows. You may need to use the Windows system -functions Catch and Throw instead.) - -The recommended memory manager under Windows is jmemnobs.c; in other words, -let Windows do any virtual memory management needed. You should NOT use -jmemdos.c nor jmemdosa.asm under Windows. - -For Windows 3.1, we recommend compiling in medium or large memory model; -for newer Windows versions, use a 32-bit flat memory model. (See the MS-DOS -sections above for more info about memory models.) In the 16-bit memory -models only, you'll need to put - #define MAX_ALLOC_CHUNK 65520L /* Maximum request to malloc() */ -into jconfig.h to limit allocation chunks to 64Kb. (Without that, you'd -have to use huge memory model, which slows things down unnecessarily.) -jmemnobs.c works without modification in large or flat memory models, but to -use medium model, you need to modify its jpeg_get_large and jpeg_free_large -routines to allocate far memory. In any case, you might like to replace -its calls to malloc and free with direct calls on Windows memory allocation -functions. - -You may also want to modify jdatasrc.c and jdatadst.c to use Windows file -operations rather than fread/fwrite. This is only necessary if your C -compiler doesn't provide a competent implementation of C stdio functions. - -You might want to tweak the RGB_xxx macros in jmorecfg.h so that the library -will accept or deliver color pixels in BGR sample order, not RGB; BGR order -is usually more convenient under Windows. Note that this change will break -the sample applications cjpeg/djpeg, but the library itself works fine. - - -Many people want to convert the IJG library into a DLL. This is reasonably -straightforward, but watch out for the following: - - 1. Don't try to compile as a DLL in small or medium memory model; use -large model, or even better, 32-bit flat model. Many places in the IJG code -assume the address of a local variable is an ordinary (not FAR) pointer; -that isn't true in a medium-model DLL. - - 2. Microsoft C cannot pass file pointers between applications and DLLs. -(See Microsoft Knowledge Base, PSS ID Number Q50336.) So jdatasrc.c and -jdatadst.c don't work if you open a file in your application and then pass -the pointer to the DLL. One workaround is to make jdatasrc.c/jdatadst.c -part of your main application rather than part of the DLL. - - 3. You'll probably need to modify the macros GLOBAL() and EXTERN() to -attach suitable linkage keywords to the exported routine names. Similarly, -you'll want to modify METHODDEF() and JMETHOD() to ensure function pointers -are declared in a way that lets application routines be called back through -the function pointers. These macros are in jmorecfg.h. Typical definitions -for a 16-bit DLL are: - #define GLOBAL(type) type _far _pascal _loadds _export - #define EXTERN(type) extern type _far _pascal _loadds - #define METHODDEF(type) static type _far _pascal - #define JMETHOD(type,methodname,arglist) \ - type (_far _pascal *methodname) arglist -For a 32-bit DLL you may want something like - #define GLOBAL(type) __declspec(dllexport) type - #define EXTERN(type) extern __declspec(dllexport) type -Although not all the GLOBAL routines are actually intended to be called by -the application, the performance cost of making them all DLL entry points is -negligible. - -The unmodified IJG library presents a very C-specific application interface, -so the resulting DLL is only usable from C or C++ applications. There has -been some talk of writing wrapper code that would present a simpler interface -usable from other languages, such as Visual Basic. This is on our to-do list -but hasn't been very high priority --- any volunteers out there? - - -Microsoft Windows, Borland C: - -The provided jconfig.bcc should work OK in a 32-bit Windows environment, -but you'll need to tweak it in a 16-bit environment (you'd need to define -NEED_FAR_POINTERS and MAX_ALLOC_CHUNK). Beware that makefile.bcc will need -alteration if you want to use it for Windows --- in particular, you should -use jmemnobs.c not jmemdos.c under Windows. - -Borland C++ 4.5 fails with an internal compiler error when trying to compile -jdmerge.c in 32-bit mode. If enough people complain, perhaps Borland will fix -it. In the meantime, the simplest known workaround is to add a redundant -definition of the variable range_limit in h2v1_merged_upsample(), at the head -of the block that handles odd image width (about line 268 in v6 jdmerge.c): - /* If image width is odd, do the last output column separately */ - if (cinfo->output_width & 1) { - register JSAMPLE * range_limit = cinfo->sample_range_limit; /* ADD THIS */ - cb = GETJSAMPLE(*inptr1); -Pretty bizarre, especially since the very similar routine h2v2_merged_upsample -doesn't trigger the bug. -Recent reports suggest that this bug does not occur with "bcc32a" (the -Pentium-optimized version of the compiler). - -Another report from a user of Borland C 4.5 was that incorrect code (leading -to a color shift in processed images) was produced if any of the following -optimization switch combinations were used: - -Ot -Og - -Ot -Op - -Ot -Om -So try backing off on optimization if you see such a problem. (Are there -several different releases all numbered "4.5"??) - - -Microsoft Windows, Microsoft Visual C++: - -jconfig.vc should work OK with any Microsoft compiler for a 32-bit memory -model. makefile.vc is intended for command-line use. (If you are using -the Developer Studio environment, you may prefer the DevStudio project -files; see below.) - -IJG JPEG 7 adds extern "C" to jpeglib.h. This avoids the need to put -extern "C" { ... } around #include "jpeglib.h" in your C++ application. -You can also force VC++ to treat the library as C++ code by renaming -all the *.c files to *.cpp (and adjusting the makefile to match). -In this case you also need to define the symbol DONT_USE_EXTERN_C in -the configuration to prevent jpeglib.h from using extern "C". - - -Microsoft Windows, Microsoft Visual C++ 6 Developer Studio: - -We include makefiles that should work as project files in DevStudio 6.0 or -later. There is a library makefile that builds the IJG library as a static -Win32 library, and application makefiles that build the sample applications -as Win32 console applications. (Even if you only want the library, we -recommend building the applications so that you can run the self-test.) - -To use: -1. Open the command prompt, change to the main directory and execute the - command line - NMAKE /f makefile.vc setup-vc6 - This will move jconfig.vc to jconfig.h and makefiles to project files. - (Note that the renaming is critical!) -2. Open the workspace file jpeg.dsw, build the library project. - (If you are using DevStudio more recent than 6.0, you'll probably - get a message saying that the project files are being updated.) -3. Open the workspace file apps.dsw, build the application projects. -4. To perform the self-test, execute the command line - NMAKE /f makefile.vc test-build -5. Move the application .exe files from `app`\Release to an - appropriate location on your path. - - -Microsoft Windows, Microsoft Visual C++ 2010 Developer Studio (v10): - -We include makefiles that should work as project files in Visual Studio -2010 or later. There is a library makefile that builds the IJG library -as a static Win32 library, and application makefiles that build the sample -applications as Win32 console applications. (Even if you only want the -library, we recommend building the applications so that you can run the -self-test.) - -To use: -1. Open the command prompt, change to the main directory and execute the - command line - NMAKE /f makefile.vc setup-v10 - This will move jconfig.vc to jconfig.h and makefiles to project files. - (Note that the renaming is critical!) -2. Open the solution file jpeg.sln, build the library project. - (If you are using Visual Studio more recent than 2010 (v10), you'll - probably get a message saying that the project files are being updated.) -3. Open the solution file apps.sln, build the application projects. -4. To perform the self-test, execute the command line - NMAKE /f makefile.vc test-build -5. Move the application .exe files from `app`\Release to an - appropriate location on your path. - -Note: -There seems to be an optimization bug in the compiler which causes the -self-test to fail with the color quantization option. -We have disabled optimization for the file jquant2.c in the library -project file which causes the self-test to pass properly. - - -OS/2, Borland C++: - -Watch out for optimization bugs in older Borland compilers; you may need -to back off the optimization switch settings. See the comments in -makefile.bcc. - - -SGI: - -On some SGI systems, you may need to set "AR2= ar -ts" in the Makefile. -If you are using configure, you can do this by saying - ./configure RANLIB='ar -ts' -This change is not needed on all SGIs. Use it only if the make fails at the -stage of linking the completed programs. - -On the MIPS R4000 architecture (Indy, etc.), the compiler option "-mips2" -reportedly speeds up the float DCT method substantially, enough to make it -faster than the default int method (but still slower than the fast int -method). If you use -mips2, you may want to alter the default DCT method to -be float. To do this, put "#define JDCT_DEFAULT JDCT_FLOAT" in jconfig.h. - - -VMS: - -On an Alpha/VMS system with MMS, be sure to use the "/Marco=Alpha=1" -qualifier with MMS when building the JPEG package. - -VAX/VMS v5.5-1 may have problems with the test step of the build procedure -reporting differences when it compares the original and test images. If the -error points to the last block of the files, it is most likely bogus and may -be safely ignored. It seems to be because the files are Stream_LF and -Backup/Compare has difficulty with the (presumably) null padded files. -This problem was not observed on VAX/VMS v6.1 or AXP/VMS v6.1. diff --git a/jpeg/jaricom.c b/jpeg/jaricom.c deleted file mode 100755 index 6900688..0000000 --- a/jpeg/jaricom.c +++ /dev/null @@ -1,153 +0,0 @@ -/* - * jaricom.c - * - * Developed 1997-2011 by Guido Vollbeding. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains probability estimation tables for common use in - * arithmetic entropy encoding and decoding routines. - * - * This data represents Table D.3 in the JPEG spec (D.2 in the draft), - * ISO/IEC IS 10918-1 and CCITT Recommendation ITU-T T.81, and Table 24 - * in the JBIG spec, ISO/IEC IS 11544 and CCITT Recommendation ITU-T T.82. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - -/* The following #define specifies the packing of the four components - * into the compact INT32 representation. - * Note that this formula must match the actual arithmetic encoder - * and decoder implementation. The implementation has to be changed - * if this formula is changed. - * The current organization is leaned on Markus Kuhn's JBIG - * implementation (jbig_tab.c). - */ - -#define V(i,a,b,c,d) (((INT32)a << 16) | ((INT32)c << 8) | ((INT32)d << 7) | b) - -const INT32 jpeg_aritab[113+1] = { -/* - * Index, Qe_Value, Next_Index_LPS, Next_Index_MPS, Switch_MPS - */ - V( 0, 0x5a1d, 1, 1, 1 ), - V( 1, 0x2586, 14, 2, 0 ), - V( 2, 0x1114, 16, 3, 0 ), - V( 3, 0x080b, 18, 4, 0 ), - V( 4, 0x03d8, 20, 5, 0 ), - V( 5, 0x01da, 23, 6, 0 ), - V( 6, 0x00e5, 25, 7, 0 ), - V( 7, 0x006f, 28, 8, 0 ), - V( 8, 0x0036, 30, 9, 0 ), - V( 9, 0x001a, 33, 10, 0 ), - V( 10, 0x000d, 35, 11, 0 ), - V( 11, 0x0006, 9, 12, 0 ), - V( 12, 0x0003, 10, 13, 0 ), - V( 13, 0x0001, 12, 13, 0 ), - V( 14, 0x5a7f, 15, 15, 1 ), - V( 15, 0x3f25, 36, 16, 0 ), - V( 16, 0x2cf2, 38, 17, 0 ), - V( 17, 0x207c, 39, 18, 0 ), - V( 18, 0x17b9, 40, 19, 0 ), - V( 19, 0x1182, 42, 20, 0 ), - V( 20, 0x0cef, 43, 21, 0 ), - V( 21, 0x09a1, 45, 22, 0 ), - V( 22, 0x072f, 46, 23, 0 ), - V( 23, 0x055c, 48, 24, 0 ), - V( 24, 0x0406, 49, 25, 0 ), - V( 25, 0x0303, 51, 26, 0 ), - V( 26, 0x0240, 52, 27, 0 ), - V( 27, 0x01b1, 54, 28, 0 ), - V( 28, 0x0144, 56, 29, 0 ), - V( 29, 0x00f5, 57, 30, 0 ), - V( 30, 0x00b7, 59, 31, 0 ), - V( 31, 0x008a, 60, 32, 0 ), - V( 32, 0x0068, 62, 33, 0 ), - V( 33, 0x004e, 63, 34, 0 ), - V( 34, 0x003b, 32, 35, 0 ), - V( 35, 0x002c, 33, 9, 0 ), - V( 36, 0x5ae1, 37, 37, 1 ), - V( 37, 0x484c, 64, 38, 0 ), - V( 38, 0x3a0d, 65, 39, 0 ), - V( 39, 0x2ef1, 67, 40, 0 ), - V( 40, 0x261f, 68, 41, 0 ), - V( 41, 0x1f33, 69, 42, 0 ), - V( 42, 0x19a8, 70, 43, 0 ), - V( 43, 0x1518, 72, 44, 0 ), - V( 44, 0x1177, 73, 45, 0 ), - V( 45, 0x0e74, 74, 46, 0 ), - V( 46, 0x0bfb, 75, 47, 0 ), - V( 47, 0x09f8, 77, 48, 0 ), - V( 48, 0x0861, 78, 49, 0 ), - V( 49, 0x0706, 79, 50, 0 ), - V( 50, 0x05cd, 48, 51, 0 ), - V( 51, 0x04de, 50, 52, 0 ), - V( 52, 0x040f, 50, 53, 0 ), - V( 53, 0x0363, 51, 54, 0 ), - V( 54, 0x02d4, 52, 55, 0 ), - V( 55, 0x025c, 53, 56, 0 ), - V( 56, 0x01f8, 54, 57, 0 ), - V( 57, 0x01a4, 55, 58, 0 ), - V( 58, 0x0160, 56, 59, 0 ), - V( 59, 0x0125, 57, 60, 0 ), - V( 60, 0x00f6, 58, 61, 0 ), - V( 61, 0x00cb, 59, 62, 0 ), - V( 62, 0x00ab, 61, 63, 0 ), - V( 63, 0x008f, 61, 32, 0 ), - V( 64, 0x5b12, 65, 65, 1 ), - V( 65, 0x4d04, 80, 66, 0 ), - V( 66, 0x412c, 81, 67, 0 ), - V( 67, 0x37d8, 82, 68, 0 ), - V( 68, 0x2fe8, 83, 69, 0 ), - V( 69, 0x293c, 84, 70, 0 ), - V( 70, 0x2379, 86, 71, 0 ), - V( 71, 0x1edf, 87, 72, 0 ), - V( 72, 0x1aa9, 87, 73, 0 ), - V( 73, 0x174e, 72, 74, 0 ), - V( 74, 0x1424, 72, 75, 0 ), - V( 75, 0x119c, 74, 76, 0 ), - V( 76, 0x0f6b, 74, 77, 0 ), - V( 77, 0x0d51, 75, 78, 0 ), - V( 78, 0x0bb6, 77, 79, 0 ), - V( 79, 0x0a40, 77, 48, 0 ), - V( 80, 0x5832, 80, 81, 1 ), - V( 81, 0x4d1c, 88, 82, 0 ), - V( 82, 0x438e, 89, 83, 0 ), - V( 83, 0x3bdd, 90, 84, 0 ), - V( 84, 0x34ee, 91, 85, 0 ), - V( 85, 0x2eae, 92, 86, 0 ), - V( 86, 0x299a, 93, 87, 0 ), - V( 87, 0x2516, 86, 71, 0 ), - V( 88, 0x5570, 88, 89, 1 ), - V( 89, 0x4ca9, 95, 90, 0 ), - V( 90, 0x44d9, 96, 91, 0 ), - V( 91, 0x3e22, 97, 92, 0 ), - V( 92, 0x3824, 99, 93, 0 ), - V( 93, 0x32b4, 99, 94, 0 ), - V( 94, 0x2e17, 93, 86, 0 ), - V( 95, 0x56a8, 95, 96, 1 ), - V( 96, 0x4f46, 101, 97, 0 ), - V( 97, 0x47e5, 102, 98, 0 ), - V( 98, 0x41cf, 103, 99, 0 ), - V( 99, 0x3c3d, 104, 100, 0 ), - V( 100, 0x375e, 99, 93, 0 ), - V( 101, 0x5231, 105, 102, 0 ), - V( 102, 0x4c0f, 106, 103, 0 ), - V( 103, 0x4639, 107, 104, 0 ), - V( 104, 0x415e, 103, 99, 0 ), - V( 105, 0x5627, 105, 106, 1 ), - V( 106, 0x50e7, 108, 107, 0 ), - V( 107, 0x4b85, 109, 103, 0 ), - V( 108, 0x5597, 110, 109, 0 ), - V( 109, 0x504f, 111, 107, 0 ), - V( 110, 0x5a10, 110, 111, 1 ), - V( 111, 0x5522, 112, 109, 0 ), - V( 112, 0x59eb, 112, 111, 1 ), -/* - * This last entry is used for fixed probability estimate of 0.5 - * as suggested in Section 10.3 Table 5 of ITU-T Rec. T.851. - */ - V( 113, 0x5a1d, 113, 113, 0 ) -}; diff --git a/jpeg/jcapimin.c b/jpeg/jcapimin.c deleted file mode 100755 index 639ce86..0000000 --- a/jpeg/jcapimin.c +++ /dev/null @@ -1,288 +0,0 @@ -/* - * jcapimin.c - * - * Copyright (C) 1994-1998, Thomas G. Lane. - * Modified 2003-2010 by Guido Vollbeding. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains application interface code for the compression half - * of the JPEG library. These are the "minimum" API routines that may be - * needed in either the normal full-compression case or the transcoding-only - * case. - * - * Most of the routines intended to be called directly by an application - * are in this file or in jcapistd.c. But also see jcparam.c for - * parameter-setup helper routines, jcomapi.c for routines shared by - * compression and decompression, and jctrans.c for the transcoding case. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* - * Initialization of a JPEG compression object. - * The error manager must already be set up (in case memory manager fails). - */ - -GLOBAL(void) -jpeg_CreateCompress (j_compress_ptr cinfo, int version, size_t structsize) -{ - int i; - - /* Guard against version mismatches between library and caller. */ - cinfo->mem = NULL; /* so jpeg_destroy knows mem mgr not called */ - if (version != JPEG_LIB_VERSION) - ERREXIT2(cinfo, JERR_BAD_LIB_VERSION, JPEG_LIB_VERSION, version); - if (structsize != SIZEOF(struct jpeg_compress_struct)) - ERREXIT2(cinfo, JERR_BAD_STRUCT_SIZE, - (int) SIZEOF(struct jpeg_compress_struct), (int) structsize); - - /* For debugging purposes, we zero the whole master structure. - * But the application has already set the err pointer, and may have set - * client_data, so we have to save and restore those fields. - * Note: if application hasn't set client_data, tools like Purify may - * complain here. - */ - { - struct jpeg_error_mgr * err = cinfo->err; - void * client_data = cinfo->client_data; /* ignore Purify complaint here */ - MEMZERO(cinfo, SIZEOF(struct jpeg_compress_struct)); - cinfo->err = err; - cinfo->client_data = client_data; - } - cinfo->is_decompressor = FALSE; - - /* Initialize a memory manager instance for this object */ - jinit_memory_mgr((j_common_ptr) cinfo); - - /* Zero out pointers to permanent structures. */ - cinfo->progress = NULL; - cinfo->dest = NULL; - - cinfo->comp_info = NULL; - - for (i = 0; i < NUM_QUANT_TBLS; i++) { - cinfo->quant_tbl_ptrs[i] = NULL; - cinfo->q_scale_factor[i] = 100; - } - - for (i = 0; i < NUM_HUFF_TBLS; i++) { - cinfo->dc_huff_tbl_ptrs[i] = NULL; - cinfo->ac_huff_tbl_ptrs[i] = NULL; - } - - /* Must do it here for emit_dqt in case jpeg_write_tables is used */ - cinfo->block_size = DCTSIZE; - cinfo->natural_order = jpeg_natural_order; - cinfo->lim_Se = DCTSIZE2-1; - - cinfo->script_space = NULL; - - cinfo->input_gamma = 1.0; /* in case application forgets */ - - /* OK, I'm ready */ - cinfo->global_state = CSTATE_START; -} - - -/* - * Destruction of a JPEG compression object - */ - -GLOBAL(void) -jpeg_destroy_compress (j_compress_ptr cinfo) -{ - jpeg_destroy((j_common_ptr) cinfo); /* use common routine */ -} - - -/* - * Abort processing of a JPEG compression operation, - * but don't destroy the object itself. - */ - -GLOBAL(void) -jpeg_abort_compress (j_compress_ptr cinfo) -{ - jpeg_abort((j_common_ptr) cinfo); /* use common routine */ -} - - -/* - * Forcibly suppress or un-suppress all quantization and Huffman tables. - * Marks all currently defined tables as already written (if suppress) - * or not written (if !suppress). This will control whether they get emitted - * by a subsequent jpeg_start_compress call. - * - * This routine is exported for use by applications that want to produce - * abbreviated JPEG datastreams. It logically belongs in jcparam.c, but - * since it is called by jpeg_start_compress, we put it here --- otherwise - * jcparam.o would be linked whether the application used it or not. - */ - -GLOBAL(void) -jpeg_suppress_tables (j_compress_ptr cinfo, boolean suppress) -{ - int i; - JQUANT_TBL * qtbl; - JHUFF_TBL * htbl; - - for (i = 0; i < NUM_QUANT_TBLS; i++) { - if ((qtbl = cinfo->quant_tbl_ptrs[i]) != NULL) - qtbl->sent_table = suppress; - } - - for (i = 0; i < NUM_HUFF_TBLS; i++) { - if ((htbl = cinfo->dc_huff_tbl_ptrs[i]) != NULL) - htbl->sent_table = suppress; - if ((htbl = cinfo->ac_huff_tbl_ptrs[i]) != NULL) - htbl->sent_table = suppress; - } -} - - -/* - * Finish JPEG compression. - * - * If a multipass operating mode was selected, this may do a great deal of - * work including most of the actual output. - */ - -GLOBAL(void) -jpeg_finish_compress (j_compress_ptr cinfo) -{ - JDIMENSION iMCU_row; - - if (cinfo->global_state == CSTATE_SCANNING || - cinfo->global_state == CSTATE_RAW_OK) { - /* Terminate first pass */ - if (cinfo->next_scanline < cinfo->image_height) - ERREXIT(cinfo, JERR_TOO_LITTLE_DATA); - (*cinfo->master->finish_pass) (cinfo); - } else if (cinfo->global_state != CSTATE_WRCOEFS) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - /* Perform any remaining passes */ - while (! cinfo->master->is_last_pass) { - (*cinfo->master->prepare_for_pass) (cinfo); - for (iMCU_row = 0; iMCU_row < cinfo->total_iMCU_rows; iMCU_row++) { - if (cinfo->progress != NULL) { - cinfo->progress->pass_counter = (long) iMCU_row; - cinfo->progress->pass_limit = (long) cinfo->total_iMCU_rows; - (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo); - } - /* We bypass the main controller and invoke coef controller directly; - * all work is being done from the coefficient buffer. - */ - if (! (*cinfo->coef->compress_data) (cinfo, (JSAMPIMAGE) NULL)) - ERREXIT(cinfo, JERR_CANT_SUSPEND); - } - (*cinfo->master->finish_pass) (cinfo); - } - /* Write EOI, do final cleanup */ - (*cinfo->marker->write_file_trailer) (cinfo); - (*cinfo->dest->term_destination) (cinfo); - /* We can use jpeg_abort to release memory and reset global_state */ - jpeg_abort((j_common_ptr) cinfo); -} - - -/* - * Write a special marker. - * This is only recommended for writing COM or APPn markers. - * Must be called after jpeg_start_compress() and before - * first call to jpeg_write_scanlines() or jpeg_write_raw_data(). - */ - -GLOBAL(void) -jpeg_write_marker (j_compress_ptr cinfo, int marker, - const JOCTET *dataptr, unsigned int datalen) -{ - JMETHOD(void, write_marker_byte, (j_compress_ptr info, int val)); - - if (cinfo->next_scanline != 0 || - (cinfo->global_state != CSTATE_SCANNING && - cinfo->global_state != CSTATE_RAW_OK && - cinfo->global_state != CSTATE_WRCOEFS)) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - - (*cinfo->marker->write_marker_header) (cinfo, marker, datalen); - write_marker_byte = cinfo->marker->write_marker_byte; /* copy for speed */ - while (datalen--) { - (*write_marker_byte) (cinfo, *dataptr); - dataptr++; - } -} - -/* Same, but piecemeal. */ - -GLOBAL(void) -jpeg_write_m_header (j_compress_ptr cinfo, int marker, unsigned int datalen) -{ - if (cinfo->next_scanline != 0 || - (cinfo->global_state != CSTATE_SCANNING && - cinfo->global_state != CSTATE_RAW_OK && - cinfo->global_state != CSTATE_WRCOEFS)) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - - (*cinfo->marker->write_marker_header) (cinfo, marker, datalen); -} - -GLOBAL(void) -jpeg_write_m_byte (j_compress_ptr cinfo, int val) -{ - (*cinfo->marker->write_marker_byte) (cinfo, val); -} - - -/* - * Alternate compression function: just write an abbreviated table file. - * Before calling this, all parameters and a data destination must be set up. - * - * To produce a pair of files containing abbreviated tables and abbreviated - * image data, one would proceed as follows: - * - * initialize JPEG object - * set JPEG parameters - * set destination to table file - * jpeg_write_tables(cinfo); - * set destination to image file - * jpeg_start_compress(cinfo, FALSE); - * write data... - * jpeg_finish_compress(cinfo); - * - * jpeg_write_tables has the side effect of marking all tables written - * (same as jpeg_suppress_tables(..., TRUE)). Thus a subsequent start_compress - * will not re-emit the tables unless it is passed write_all_tables=TRUE. - */ - -GLOBAL(void) -jpeg_write_tables (j_compress_ptr cinfo) -{ - if (cinfo->global_state != CSTATE_START) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - - /* (Re)initialize error mgr and destination modules */ - (*cinfo->err->reset_error_mgr) ((j_common_ptr) cinfo); - (*cinfo->dest->init_destination) (cinfo); - /* Initialize the marker writer ... bit of a crock to do it here. */ - jinit_marker_writer(cinfo); - /* Write them tables! */ - (*cinfo->marker->write_tables_only) (cinfo); - /* And clean up. */ - (*cinfo->dest->term_destination) (cinfo); - /* - * In library releases up through v6a, we called jpeg_abort() here to free - * any working memory allocated by the destination manager and marker - * writer. Some applications had a problem with that: they allocated space - * of their own from the library memory manager, and didn't want it to go - * away during write_tables. So now we do nothing. This will cause a - * memory leak if an app calls write_tables repeatedly without doing a full - * compression cycle or otherwise resetting the JPEG object. However, that - * seems less bad than unexpectedly freeing memory in the normal case. - * An app that prefers the old behavior can call jpeg_abort for itself after - * each call to jpeg_write_tables(). - */ -} diff --git a/jpeg/jcapistd.c b/jpeg/jcapistd.c deleted file mode 100755 index c0320b1..0000000 --- a/jpeg/jcapistd.c +++ /dev/null @@ -1,161 +0,0 @@ -/* - * jcapistd.c - * - * Copyright (C) 1994-1996, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains application interface code for the compression half - * of the JPEG library. These are the "standard" API routines that are - * used in the normal full-compression case. They are not used by a - * transcoding-only application. Note that if an application links in - * jpeg_start_compress, it will end up linking in the entire compressor. - * We thus must separate this file from jcapimin.c to avoid linking the - * whole compression library into a transcoder. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* - * Compression initialization. - * Before calling this, all parameters and a data destination must be set up. - * - * We require a write_all_tables parameter as a failsafe check when writing - * multiple datastreams from the same compression object. Since prior runs - * will have left all the tables marked sent_table=TRUE, a subsequent run - * would emit an abbreviated stream (no tables) by default. This may be what - * is wanted, but for safety's sake it should not be the default behavior: - * programmers should have to make a deliberate choice to emit abbreviated - * images. Therefore the documentation and examples should encourage people - * to pass write_all_tables=TRUE; then it will take active thought to do the - * wrong thing. - */ - -GLOBAL(void) -jpeg_start_compress (j_compress_ptr cinfo, boolean write_all_tables) -{ - if (cinfo->global_state != CSTATE_START) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - - if (write_all_tables) - jpeg_suppress_tables(cinfo, FALSE); /* mark all tables to be written */ - - /* (Re)initialize error mgr and destination modules */ - (*cinfo->err->reset_error_mgr) ((j_common_ptr) cinfo); - (*cinfo->dest->init_destination) (cinfo); - /* Perform master selection of active modules */ - jinit_compress_master(cinfo); - /* Set up for the first pass */ - (*cinfo->master->prepare_for_pass) (cinfo); - /* Ready for application to drive first pass through jpeg_write_scanlines - * or jpeg_write_raw_data. - */ - cinfo->next_scanline = 0; - cinfo->global_state = (cinfo->raw_data_in ? CSTATE_RAW_OK : CSTATE_SCANNING); -} - - -/* - * Write some scanlines of data to the JPEG compressor. - * - * The return value will be the number of lines actually written. - * This should be less than the supplied num_lines only in case that - * the data destination module has requested suspension of the compressor, - * or if more than image_height scanlines are passed in. - * - * Note: we warn about excess calls to jpeg_write_scanlines() since - * this likely signals an application programmer error. However, - * excess scanlines passed in the last valid call are *silently* ignored, - * so that the application need not adjust num_lines for end-of-image - * when using a multiple-scanline buffer. - */ - -GLOBAL(JDIMENSION) -jpeg_write_scanlines (j_compress_ptr cinfo, JSAMPARRAY scanlines, - JDIMENSION num_lines) -{ - JDIMENSION row_ctr, rows_left; - - if (cinfo->global_state != CSTATE_SCANNING) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - if (cinfo->next_scanline >= cinfo->image_height) - WARNMS(cinfo, JWRN_TOO_MUCH_DATA); - - /* Call progress monitor hook if present */ - if (cinfo->progress != NULL) { - cinfo->progress->pass_counter = (long) cinfo->next_scanline; - cinfo->progress->pass_limit = (long) cinfo->image_height; - (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo); - } - - /* Give master control module another chance if this is first call to - * jpeg_write_scanlines. This lets output of the frame/scan headers be - * delayed so that application can write COM, etc, markers between - * jpeg_start_compress and jpeg_write_scanlines. - */ - if (cinfo->master->call_pass_startup) - (*cinfo->master->pass_startup) (cinfo); - - /* Ignore any extra scanlines at bottom of image. */ - rows_left = cinfo->image_height - cinfo->next_scanline; - if (num_lines > rows_left) - num_lines = rows_left; - - row_ctr = 0; - (*cinfo->main->process_data) (cinfo, scanlines, &row_ctr, num_lines); - cinfo->next_scanline += row_ctr; - return row_ctr; -} - - -/* - * Alternate entry point to write raw data. - * Processes exactly one iMCU row per call, unless suspended. - */ - -GLOBAL(JDIMENSION) -jpeg_write_raw_data (j_compress_ptr cinfo, JSAMPIMAGE data, - JDIMENSION num_lines) -{ - JDIMENSION lines_per_iMCU_row; - - if (cinfo->global_state != CSTATE_RAW_OK) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - if (cinfo->next_scanline >= cinfo->image_height) { - WARNMS(cinfo, JWRN_TOO_MUCH_DATA); - return 0; - } - - /* Call progress monitor hook if present */ - if (cinfo->progress != NULL) { - cinfo->progress->pass_counter = (long) cinfo->next_scanline; - cinfo->progress->pass_limit = (long) cinfo->image_height; - (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo); - } - - /* Give master control module another chance if this is first call to - * jpeg_write_raw_data. This lets output of the frame/scan headers be - * delayed so that application can write COM, etc, markers between - * jpeg_start_compress and jpeg_write_raw_data. - */ - if (cinfo->master->call_pass_startup) - (*cinfo->master->pass_startup) (cinfo); - - /* Verify that at least one iMCU row has been passed. */ - lines_per_iMCU_row = cinfo->max_v_samp_factor * DCTSIZE; - if (num_lines < lines_per_iMCU_row) - ERREXIT(cinfo, JERR_BUFFER_SIZE); - - /* Directly compress the row. */ - if (! (*cinfo->coef->compress_data) (cinfo, data)) { - /* If compressor did not consume the whole row, suspend processing. */ - return 0; - } - - /* OK, we processed one iMCU row. */ - cinfo->next_scanline += lines_per_iMCU_row; - return lines_per_iMCU_row; -} diff --git a/jpeg/jcarith.c b/jpeg/jcarith.c deleted file mode 100755 index 033f670..0000000 --- a/jpeg/jcarith.c +++ /dev/null @@ -1,937 +0,0 @@ -/* - * jcarith.c - * - * Developed 1997-2011 by Guido Vollbeding. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains portable arithmetic entropy encoding routines for JPEG - * (implementing the ISO/IEC IS 10918-1 and CCITT Recommendation ITU-T T.81). - * - * Both sequential and progressive modes are supported in this single module. - * - * Suspension is not currently supported in this module. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* Expanded entropy encoder object for arithmetic encoding. */ - -typedef struct { - struct jpeg_entropy_encoder pub; /* public fields */ - - INT32 c; /* C register, base of coding interval, layout as in sec. D.1.3 */ - INT32 a; /* A register, normalized size of coding interval */ - INT32 sc; /* counter for stacked 0xFF values which might overflow */ - INT32 zc; /* counter for pending 0x00 output values which might * - * be discarded at the end ("Pacman" termination) */ - int ct; /* bit shift counter, determines when next byte will be written */ - int buffer; /* buffer for most recent output byte != 0xFF */ - - int last_dc_val[MAX_COMPS_IN_SCAN]; /* last DC coef for each component */ - int dc_context[MAX_COMPS_IN_SCAN]; /* context index for DC conditioning */ - - unsigned int restarts_to_go; /* MCUs left in this restart interval */ - int next_restart_num; /* next restart number to write (0-7) */ - - /* Pointers to statistics areas (these workspaces have image lifespan) */ - unsigned char * dc_stats[NUM_ARITH_TBLS]; - unsigned char * ac_stats[NUM_ARITH_TBLS]; - - /* Statistics bin for coding with fixed probability 0.5 */ - unsigned char fixed_bin[4]; -} arith_entropy_encoder; - -typedef arith_entropy_encoder * arith_entropy_ptr; - -/* The following two definitions specify the allocation chunk size - * for the statistics area. - * According to sections F.1.4.4.1.3 and F.1.4.4.2, we need at least - * 49 statistics bins for DC, and 245 statistics bins for AC coding. - * - * We use a compact representation with 1 byte per statistics bin, - * thus the numbers directly represent byte sizes. - * This 1 byte per statistics bin contains the meaning of the MPS - * (more probable symbol) in the highest bit (mask 0x80), and the - * index into the probability estimation state machine table - * in the lower bits (mask 0x7F). - */ - -#define DC_STAT_BINS 64 -#define AC_STAT_BINS 256 - -/* NOTE: Uncomment the following #define if you want to use the - * given formula for calculating the AC conditioning parameter Kx - * for spectral selection progressive coding in section G.1.3.2 - * of the spec (Kx = Kmin + SRL (8 + Se - Kmin) 4). - * Although the spec and P&M authors claim that this "has proven - * to give good results for 8 bit precision samples", I'm not - * convinced yet that this is really beneficial. - * Early tests gave only very marginal compression enhancements - * (a few - around 5 or so - bytes even for very large files), - * which would turn out rather negative if we'd suppress the - * DAC (Define Arithmetic Conditioning) marker segments for - * the default parameters in the future. - * Note that currently the marker writing module emits 12-byte - * DAC segments for a full-component scan in a color image. - * This is not worth worrying about IMHO. However, since the - * spec defines the default values to be used if the tables - * are omitted (unlike Huffman tables, which are required - * anyway), one might optimize this behaviour in the future, - * and then it would be disadvantageous to use custom tables if - * they don't provide sufficient gain to exceed the DAC size. - * - * On the other hand, I'd consider it as a reasonable result - * that the conditioning has no significant influence on the - * compression performance. This means that the basic - * statistical model is already rather stable. - * - * Thus, at the moment, we use the default conditioning values - * anyway, and do not use the custom formula. - * -#define CALCULATE_SPECTRAL_CONDITIONING - */ - -/* IRIGHT_SHIFT is like RIGHT_SHIFT, but works on int rather than INT32. - * We assume that int right shift is unsigned if INT32 right shift is, - * which should be safe. - */ - -#ifdef RIGHT_SHIFT_IS_UNSIGNED -#define ISHIFT_TEMPS int ishift_temp; -#define IRIGHT_SHIFT(x,shft) \ - ((ishift_temp = (x)) < 0 ? \ - (ishift_temp >> (shft)) | ((~0) << (16-(shft))) : \ - (ishift_temp >> (shft))) -#else -#define ISHIFT_TEMPS -#define IRIGHT_SHIFT(x,shft) ((x) >> (shft)) -#endif - - -LOCAL(void) -emit_byte (int val, j_compress_ptr cinfo) -/* Write next output byte; we do not support suspension in this module. */ -{ - struct jpeg_destination_mgr * dest = cinfo->dest; - - *dest->next_output_byte++ = (JOCTET) val; - if (--dest->free_in_buffer == 0) - if (! (*dest->empty_output_buffer) (cinfo)) - ERREXIT(cinfo, JERR_CANT_SUSPEND); -} - - -/* - * Finish up at the end of an arithmetic-compressed scan. - */ - -METHODDEF(void) -finish_pass (j_compress_ptr cinfo) -{ - arith_entropy_ptr e = (arith_entropy_ptr) cinfo->entropy; - INT32 temp; - - /* Section D.1.8: Termination of encoding */ - - /* Find the e->c in the coding interval with the largest - * number of trailing zero bits */ - if ((temp = (e->a - 1 + e->c) & 0xFFFF0000L) < e->c) - e->c = temp + 0x8000L; - else - e->c = temp; - /* Send remaining bytes to output */ - e->c <<= e->ct; - if (e->c & 0xF8000000L) { - /* One final overflow has to be handled */ - if (e->buffer >= 0) { - if (e->zc) - do emit_byte(0x00, cinfo); - while (--e->zc); - emit_byte(e->buffer + 1, cinfo); - if (e->buffer + 1 == 0xFF) - emit_byte(0x00, cinfo); - } - e->zc += e->sc; /* carry-over converts stacked 0xFF bytes to 0x00 */ - e->sc = 0; - } else { - if (e->buffer == 0) - ++e->zc; - else if (e->buffer >= 0) { - if (e->zc) - do emit_byte(0x00, cinfo); - while (--e->zc); - emit_byte(e->buffer, cinfo); - } - if (e->sc) { - if (e->zc) - do emit_byte(0x00, cinfo); - while (--e->zc); - do { - emit_byte(0xFF, cinfo); - emit_byte(0x00, cinfo); - } while (--e->sc); - } - } - /* Output final bytes only if they are not 0x00 */ - if (e->c & 0x7FFF800L) { - if (e->zc) /* output final pending zero bytes */ - do emit_byte(0x00, cinfo); - while (--e->zc); - emit_byte((e->c >> 19) & 0xFF, cinfo); - if (((e->c >> 19) & 0xFF) == 0xFF) - emit_byte(0x00, cinfo); - if (e->c & 0x7F800L) { - emit_byte((e->c >> 11) & 0xFF, cinfo); - if (((e->c >> 11) & 0xFF) == 0xFF) - emit_byte(0x00, cinfo); - } - } -} - - -/* - * The core arithmetic encoding routine (common in JPEG and JBIG). - * This needs to go as fast as possible. - * Machine-dependent optimization facilities - * are not utilized in this portable implementation. - * However, this code should be fairly efficient and - * may be a good base for further optimizations anyway. - * - * Parameter 'val' to be encoded may be 0 or 1 (binary decision). - * - * Note: I've added full "Pacman" termination support to the - * byte output routines, which is equivalent to the optional - * Discard_final_zeros procedure (Figure D.15) in the spec. - * Thus, we always produce the shortest possible output - * stream compliant to the spec (no trailing zero bytes, - * except for FF stuffing). - * - * I've also introduced a new scheme for accessing - * the probability estimation state machine table, - * derived from Markus Kuhn's JBIG implementation. - */ - -LOCAL(void) -arith_encode (j_compress_ptr cinfo, unsigned char *st, int val) -{ - register arith_entropy_ptr e = (arith_entropy_ptr) cinfo->entropy; - register unsigned char nl, nm; - register INT32 qe, temp; - register int sv; - - /* Fetch values from our compact representation of Table D.3(D.2): - * Qe values and probability estimation state machine - */ - sv = *st; - qe = jpeg_aritab[sv & 0x7F]; /* => Qe_Value */ - nl = qe & 0xFF; qe >>= 8; /* Next_Index_LPS + Switch_MPS */ - nm = qe & 0xFF; qe >>= 8; /* Next_Index_MPS */ - - /* Encode & estimation procedures per sections D.1.4 & D.1.5 */ - e->a -= qe; - if (val != (sv >> 7)) { - /* Encode the less probable symbol */ - if (e->a >= qe) { - /* If the interval size (qe) for the less probable symbol (LPS) - * is larger than the interval size for the MPS, then exchange - * the two symbols for coding efficiency, otherwise code the LPS - * as usual: */ - e->c += e->a; - e->a = qe; - } - *st = (sv & 0x80) ^ nl; /* Estimate_after_LPS */ - } else { - /* Encode the more probable symbol */ - if (e->a >= 0x8000L) - return; /* A >= 0x8000 -> ready, no renormalization required */ - if (e->a < qe) { - /* If the interval size (qe) for the less probable symbol (LPS) - * is larger than the interval size for the MPS, then exchange - * the two symbols for coding efficiency: */ - e->c += e->a; - e->a = qe; - } - *st = (sv & 0x80) ^ nm; /* Estimate_after_MPS */ - } - - /* Renormalization & data output per section D.1.6 */ - do { - e->a <<= 1; - e->c <<= 1; - if (--e->ct == 0) { - /* Another byte is ready for output */ - temp = e->c >> 19; - if (temp > 0xFF) { - /* Handle overflow over all stacked 0xFF bytes */ - if (e->buffer >= 0) { - if (e->zc) - do emit_byte(0x00, cinfo); - while (--e->zc); - emit_byte(e->buffer + 1, cinfo); - if (e->buffer + 1 == 0xFF) - emit_byte(0x00, cinfo); - } - e->zc += e->sc; /* carry-over converts stacked 0xFF bytes to 0x00 */ - e->sc = 0; - /* Note: The 3 spacer bits in the C register guarantee - * that the new buffer byte can't be 0xFF here - * (see page 160 in the P&M JPEG book). */ - e->buffer = temp & 0xFF; /* new output byte, might overflow later */ - } else if (temp == 0xFF) { - ++e->sc; /* stack 0xFF byte (which might overflow later) */ - } else { - /* Output all stacked 0xFF bytes, they will not overflow any more */ - if (e->buffer == 0) - ++e->zc; - else if (e->buffer >= 0) { - if (e->zc) - do emit_byte(0x00, cinfo); - while (--e->zc); - emit_byte(e->buffer, cinfo); - } - if (e->sc) { - if (e->zc) - do emit_byte(0x00, cinfo); - while (--e->zc); - do { - emit_byte(0xFF, cinfo); - emit_byte(0x00, cinfo); - } while (--e->sc); - } - e->buffer = temp & 0xFF; /* new output byte (can still overflow) */ - } - e->c &= 0x7FFFFL; - e->ct += 8; - } - } while (e->a < 0x8000L); -} - - -/* - * Emit a restart marker & resynchronize predictions. - */ - -LOCAL(void) -emit_restart (j_compress_ptr cinfo, int restart_num) -{ - arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy; - int ci; - jpeg_component_info * compptr; - - finish_pass(cinfo); - - emit_byte(0xFF, cinfo); - emit_byte(JPEG_RST0 + restart_num, cinfo); - - /* Re-initialize statistics areas */ - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - compptr = cinfo->cur_comp_info[ci]; - /* DC needs no table for refinement scan */ - if (cinfo->Ss == 0 && cinfo->Ah == 0) { - MEMZERO(entropy->dc_stats[compptr->dc_tbl_no], DC_STAT_BINS); - /* Reset DC predictions to 0 */ - entropy->last_dc_val[ci] = 0; - entropy->dc_context[ci] = 0; - } - /* AC needs no table when not present */ - if (cinfo->Se) { - MEMZERO(entropy->ac_stats[compptr->ac_tbl_no], AC_STAT_BINS); - } - } - - /* Reset arithmetic encoding variables */ - entropy->c = 0; - entropy->a = 0x10000L; - entropy->sc = 0; - entropy->zc = 0; - entropy->ct = 11; - entropy->buffer = -1; /* empty */ -} - - -/* - * MCU encoding for DC initial scan (either spectral selection, - * or first pass of successive approximation). - */ - -METHODDEF(boolean) -encode_mcu_DC_first (j_compress_ptr cinfo, JBLOCKROW *MCU_data) -{ - arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy; - JBLOCKROW block; - unsigned char *st; - int blkn, ci, tbl; - int v, v2, m; - ISHIFT_TEMPS - - /* Emit restart marker if needed */ - if (cinfo->restart_interval) { - if (entropy->restarts_to_go == 0) { - emit_restart(cinfo, entropy->next_restart_num); - entropy->restarts_to_go = cinfo->restart_interval; - entropy->next_restart_num++; - entropy->next_restart_num &= 7; - } - entropy->restarts_to_go--; - } - - /* Encode the MCU data blocks */ - for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { - block = MCU_data[blkn]; - ci = cinfo->MCU_membership[blkn]; - tbl = cinfo->cur_comp_info[ci]->dc_tbl_no; - - /* Compute the DC value after the required point transform by Al. - * This is simply an arithmetic right shift. - */ - m = IRIGHT_SHIFT((int) ((*block)[0]), cinfo->Al); - - /* Sections F.1.4.1 & F.1.4.4.1: Encoding of DC coefficients */ - - /* Table F.4: Point to statistics bin S0 for DC coefficient coding */ - st = entropy->dc_stats[tbl] + entropy->dc_context[ci]; - - /* Figure F.4: Encode_DC_DIFF */ - if ((v = m - entropy->last_dc_val[ci]) == 0) { - arith_encode(cinfo, st, 0); - entropy->dc_context[ci] = 0; /* zero diff category */ - } else { - entropy->last_dc_val[ci] = m; - arith_encode(cinfo, st, 1); - /* Figure F.6: Encoding nonzero value v */ - /* Figure F.7: Encoding the sign of v */ - if (v > 0) { - arith_encode(cinfo, st + 1, 0); /* Table F.4: SS = S0 + 1 */ - st += 2; /* Table F.4: SP = S0 + 2 */ - entropy->dc_context[ci] = 4; /* small positive diff category */ - } else { - v = -v; - arith_encode(cinfo, st + 1, 1); /* Table F.4: SS = S0 + 1 */ - st += 3; /* Table F.4: SN = S0 + 3 */ - entropy->dc_context[ci] = 8; /* small negative diff category */ - } - /* Figure F.8: Encoding the magnitude category of v */ - m = 0; - if (v -= 1) { - arith_encode(cinfo, st, 1); - m = 1; - v2 = v; - st = entropy->dc_stats[tbl] + 20; /* Table F.4: X1 = 20 */ - while (v2 >>= 1) { - arith_encode(cinfo, st, 1); - m <<= 1; - st += 1; - } - } - arith_encode(cinfo, st, 0); - /* Section F.1.4.4.1.2: Establish dc_context conditioning category */ - if (m < (int) ((1L << cinfo->arith_dc_L[tbl]) >> 1)) - entropy->dc_context[ci] = 0; /* zero diff category */ - else if (m > (int) ((1L << cinfo->arith_dc_U[tbl]) >> 1)) - entropy->dc_context[ci] += 8; /* large diff category */ - /* Figure F.9: Encoding the magnitude bit pattern of v */ - st += 14; - while (m >>= 1) - arith_encode(cinfo, st, (m & v) ? 1 : 0); - } - } - - return TRUE; -} - - -/* - * MCU encoding for AC initial scan (either spectral selection, - * or first pass of successive approximation). - */ - -METHODDEF(boolean) -encode_mcu_AC_first (j_compress_ptr cinfo, JBLOCKROW *MCU_data) -{ - arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy; - JBLOCKROW block; - unsigned char *st; - int tbl, k, ke; - int v, v2, m; - const int * natural_order; - - /* Emit restart marker if needed */ - if (cinfo->restart_interval) { - if (entropy->restarts_to_go == 0) { - emit_restart(cinfo, entropy->next_restart_num); - entropy->restarts_to_go = cinfo->restart_interval; - entropy->next_restart_num++; - entropy->next_restart_num &= 7; - } - entropy->restarts_to_go--; - } - - natural_order = cinfo->natural_order; - - /* Encode the MCU data block */ - block = MCU_data[0]; - tbl = cinfo->cur_comp_info[0]->ac_tbl_no; - - /* Sections F.1.4.2 & F.1.4.4.2: Encoding of AC coefficients */ - - /* Establish EOB (end-of-block) index */ - for (ke = cinfo->Se; ke > 0; ke--) - /* We must apply the point transform by Al. For AC coefficients this - * is an integer division with rounding towards 0. To do this portably - * in C, we shift after obtaining the absolute value. - */ - if ((v = (*block)[natural_order[ke]]) >= 0) { - if (v >>= cinfo->Al) break; - } else { - v = -v; - if (v >>= cinfo->Al) break; - } - - /* Figure F.5: Encode_AC_Coefficients */ - for (k = cinfo->Ss; k <= ke; k++) { - st = entropy->ac_stats[tbl] + 3 * (k - 1); - arith_encode(cinfo, st, 0); /* EOB decision */ - for (;;) { - if ((v = (*block)[natural_order[k]]) >= 0) { - if (v >>= cinfo->Al) { - arith_encode(cinfo, st + 1, 1); - arith_encode(cinfo, entropy->fixed_bin, 0); - break; - } - } else { - v = -v; - if (v >>= cinfo->Al) { - arith_encode(cinfo, st + 1, 1); - arith_encode(cinfo, entropy->fixed_bin, 1); - break; - } - } - arith_encode(cinfo, st + 1, 0); st += 3; k++; - } - st += 2; - /* Figure F.8: Encoding the magnitude category of v */ - m = 0; - if (v -= 1) { - arith_encode(cinfo, st, 1); - m = 1; - v2 = v; - if (v2 >>= 1) { - arith_encode(cinfo, st, 1); - m <<= 1; - st = entropy->ac_stats[tbl] + - (k <= cinfo->arith_ac_K[tbl] ? 189 : 217); - while (v2 >>= 1) { - arith_encode(cinfo, st, 1); - m <<= 1; - st += 1; - } - } - } - arith_encode(cinfo, st, 0); - /* Figure F.9: Encoding the magnitude bit pattern of v */ - st += 14; - while (m >>= 1) - arith_encode(cinfo, st, (m & v) ? 1 : 0); - } - /* Encode EOB decision only if k <= cinfo->Se */ - if (k <= cinfo->Se) { - st = entropy->ac_stats[tbl] + 3 * (k - 1); - arith_encode(cinfo, st, 1); - } - - return TRUE; -} - - -/* - * MCU encoding for DC successive approximation refinement scan. - */ - -METHODDEF(boolean) -encode_mcu_DC_refine (j_compress_ptr cinfo, JBLOCKROW *MCU_data) -{ - arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy; - unsigned char *st; - int Al, blkn; - - /* Emit restart marker if needed */ - if (cinfo->restart_interval) { - if (entropy->restarts_to_go == 0) { - emit_restart(cinfo, entropy->next_restart_num); - entropy->restarts_to_go = cinfo->restart_interval; - entropy->next_restart_num++; - entropy->next_restart_num &= 7; - } - entropy->restarts_to_go--; - } - - st = entropy->fixed_bin; /* use fixed probability estimation */ - Al = cinfo->Al; - - /* Encode the MCU data blocks */ - for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { - /* We simply emit the Al'th bit of the DC coefficient value. */ - arith_encode(cinfo, st, (MCU_data[blkn][0][0] >> Al) & 1); - } - - return TRUE; -} - - -/* - * MCU encoding for AC successive approximation refinement scan. - */ - -METHODDEF(boolean) -encode_mcu_AC_refine (j_compress_ptr cinfo, JBLOCKROW *MCU_data) -{ - arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy; - JBLOCKROW block; - unsigned char *st; - int tbl, k, ke, kex; - int v; - const int * natural_order; - - /* Emit restart marker if needed */ - if (cinfo->restart_interval) { - if (entropy->restarts_to_go == 0) { - emit_restart(cinfo, entropy->next_restart_num); - entropy->restarts_to_go = cinfo->restart_interval; - entropy->next_restart_num++; - entropy->next_restart_num &= 7; - } - entropy->restarts_to_go--; - } - - natural_order = cinfo->natural_order; - - /* Encode the MCU data block */ - block = MCU_data[0]; - tbl = cinfo->cur_comp_info[0]->ac_tbl_no; - - /* Section G.1.3.3: Encoding of AC coefficients */ - - /* Establish EOB (end-of-block) index */ - for (ke = cinfo->Se; ke > 0; ke--) - /* We must apply the point transform by Al. For AC coefficients this - * is an integer division with rounding towards 0. To do this portably - * in C, we shift after obtaining the absolute value. - */ - if ((v = (*block)[natural_order[ke]]) >= 0) { - if (v >>= cinfo->Al) break; - } else { - v = -v; - if (v >>= cinfo->Al) break; - } - - /* Establish EOBx (previous stage end-of-block) index */ - for (kex = ke; kex > 0; kex--) - if ((v = (*block)[natural_order[kex]]) >= 0) { - if (v >>= cinfo->Ah) break; - } else { - v = -v; - if (v >>= cinfo->Ah) break; - } - - /* Figure G.10: Encode_AC_Coefficients_SA */ - for (k = cinfo->Ss; k <= ke; k++) { - st = entropy->ac_stats[tbl] + 3 * (k - 1); - if (k > kex) - arith_encode(cinfo, st, 0); /* EOB decision */ - for (;;) { - if ((v = (*block)[natural_order[k]]) >= 0) { - if (v >>= cinfo->Al) { - if (v >> 1) /* previously nonzero coef */ - arith_encode(cinfo, st + 2, (v & 1)); - else { /* newly nonzero coef */ - arith_encode(cinfo, st + 1, 1); - arith_encode(cinfo, entropy->fixed_bin, 0); - } - break; - } - } else { - v = -v; - if (v >>= cinfo->Al) { - if (v >> 1) /* previously nonzero coef */ - arith_encode(cinfo, st + 2, (v & 1)); - else { /* newly nonzero coef */ - arith_encode(cinfo, st + 1, 1); - arith_encode(cinfo, entropy->fixed_bin, 1); - } - break; - } - } - arith_encode(cinfo, st + 1, 0); st += 3; k++; - } - } - /* Encode EOB decision only if k <= cinfo->Se */ - if (k <= cinfo->Se) { - st = entropy->ac_stats[tbl] + 3 * (k - 1); - arith_encode(cinfo, st, 1); - } - - return TRUE; -} - - -/* - * Encode and output one MCU's worth of arithmetic-compressed coefficients. - */ - -METHODDEF(boolean) -encode_mcu (j_compress_ptr cinfo, JBLOCKROW *MCU_data) -{ - arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy; - jpeg_component_info * compptr; - JBLOCKROW block; - unsigned char *st; - int blkn, ci, tbl, k, ke; - int v, v2, m; - const int * natural_order; - - /* Emit restart marker if needed */ - if (cinfo->restart_interval) { - if (entropy->restarts_to_go == 0) { - emit_restart(cinfo, entropy->next_restart_num); - entropy->restarts_to_go = cinfo->restart_interval; - entropy->next_restart_num++; - entropy->next_restart_num &= 7; - } - entropy->restarts_to_go--; - } - - natural_order = cinfo->natural_order; - - /* Encode the MCU data blocks */ - for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { - block = MCU_data[blkn]; - ci = cinfo->MCU_membership[blkn]; - compptr = cinfo->cur_comp_info[ci]; - - /* Sections F.1.4.1 & F.1.4.4.1: Encoding of DC coefficients */ - - tbl = compptr->dc_tbl_no; - - /* Table F.4: Point to statistics bin S0 for DC coefficient coding */ - st = entropy->dc_stats[tbl] + entropy->dc_context[ci]; - - /* Figure F.4: Encode_DC_DIFF */ - if ((v = (*block)[0] - entropy->last_dc_val[ci]) == 0) { - arith_encode(cinfo, st, 0); - entropy->dc_context[ci] = 0; /* zero diff category */ - } else { - entropy->last_dc_val[ci] = (*block)[0]; - arith_encode(cinfo, st, 1); - /* Figure F.6: Encoding nonzero value v */ - /* Figure F.7: Encoding the sign of v */ - if (v > 0) { - arith_encode(cinfo, st + 1, 0); /* Table F.4: SS = S0 + 1 */ - st += 2; /* Table F.4: SP = S0 + 2 */ - entropy->dc_context[ci] = 4; /* small positive diff category */ - } else { - v = -v; - arith_encode(cinfo, st + 1, 1); /* Table F.4: SS = S0 + 1 */ - st += 3; /* Table F.4: SN = S0 + 3 */ - entropy->dc_context[ci] = 8; /* small negative diff category */ - } - /* Figure F.8: Encoding the magnitude category of v */ - m = 0; - if (v -= 1) { - arith_encode(cinfo, st, 1); - m = 1; - v2 = v; - st = entropy->dc_stats[tbl] + 20; /* Table F.4: X1 = 20 */ - while (v2 >>= 1) { - arith_encode(cinfo, st, 1); - m <<= 1; - st += 1; - } - } - arith_encode(cinfo, st, 0); - /* Section F.1.4.4.1.2: Establish dc_context conditioning category */ - if (m < (int) ((1L << cinfo->arith_dc_L[tbl]) >> 1)) - entropy->dc_context[ci] = 0; /* zero diff category */ - else if (m > (int) ((1L << cinfo->arith_dc_U[tbl]) >> 1)) - entropy->dc_context[ci] += 8; /* large diff category */ - /* Figure F.9: Encoding the magnitude bit pattern of v */ - st += 14; - while (m >>= 1) - arith_encode(cinfo, st, (m & v) ? 1 : 0); - } - - /* Sections F.1.4.2 & F.1.4.4.2: Encoding of AC coefficients */ - - if ((ke = cinfo->lim_Se) == 0) continue; - tbl = compptr->ac_tbl_no; - - /* Establish EOB (end-of-block) index */ - do { - if ((*block)[natural_order[ke]]) break; - } while (--ke); - - /* Figure F.5: Encode_AC_Coefficients */ - for (k = 0; k < ke;) { - st = entropy->ac_stats[tbl] + 3 * k; - arith_encode(cinfo, st, 0); /* EOB decision */ - while ((v = (*block)[natural_order[++k]]) == 0) { - arith_encode(cinfo, st + 1, 0); - st += 3; - } - arith_encode(cinfo, st + 1, 1); - /* Figure F.6: Encoding nonzero value v */ - /* Figure F.7: Encoding the sign of v */ - if (v > 0) { - arith_encode(cinfo, entropy->fixed_bin, 0); - } else { - v = -v; - arith_encode(cinfo, entropy->fixed_bin, 1); - } - st += 2; - /* Figure F.8: Encoding the magnitude category of v */ - m = 0; - if (v -= 1) { - arith_encode(cinfo, st, 1); - m = 1; - v2 = v; - if (v2 >>= 1) { - arith_encode(cinfo, st, 1); - m <<= 1; - st = entropy->ac_stats[tbl] + - (k <= cinfo->arith_ac_K[tbl] ? 189 : 217); - while (v2 >>= 1) { - arith_encode(cinfo, st, 1); - m <<= 1; - st += 1; - } - } - } - arith_encode(cinfo, st, 0); - /* Figure F.9: Encoding the magnitude bit pattern of v */ - st += 14; - while (m >>= 1) - arith_encode(cinfo, st, (m & v) ? 1 : 0); - } - /* Encode EOB decision only if k < cinfo->lim_Se */ - if (k < cinfo->lim_Se) { - st = entropy->ac_stats[tbl] + 3 * k; - arith_encode(cinfo, st, 1); - } - } - - return TRUE; -} - - -/* - * Initialize for an arithmetic-compressed scan. - */ - -METHODDEF(void) -start_pass (j_compress_ptr cinfo, boolean gather_statistics) -{ - arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy; - int ci, tbl; - jpeg_component_info * compptr; - - if (gather_statistics) - /* Make sure to avoid that in the master control logic! - * We are fully adaptive here and need no extra - * statistics gathering pass! - */ - ERREXIT(cinfo, JERR_NOT_COMPILED); - - /* We assume jcmaster.c already validated the progressive scan parameters. */ - - /* Select execution routines */ - if (cinfo->progressive_mode) { - if (cinfo->Ah == 0) { - if (cinfo->Ss == 0) - entropy->pub.encode_mcu = encode_mcu_DC_first; - else - entropy->pub.encode_mcu = encode_mcu_AC_first; - } else { - if (cinfo->Ss == 0) - entropy->pub.encode_mcu = encode_mcu_DC_refine; - else - entropy->pub.encode_mcu = encode_mcu_AC_refine; - } - } else - entropy->pub.encode_mcu = encode_mcu; - - /* Allocate & initialize requested statistics areas */ - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - compptr = cinfo->cur_comp_info[ci]; - /* DC needs no table for refinement scan */ - if (cinfo->Ss == 0 && cinfo->Ah == 0) { - tbl = compptr->dc_tbl_no; - if (tbl < 0 || tbl >= NUM_ARITH_TBLS) - ERREXIT1(cinfo, JERR_NO_ARITH_TABLE, tbl); - if (entropy->dc_stats[tbl] == NULL) - entropy->dc_stats[tbl] = (unsigned char *) (*cinfo->mem->alloc_small) - ((j_common_ptr) cinfo, JPOOL_IMAGE, DC_STAT_BINS); - MEMZERO(entropy->dc_stats[tbl], DC_STAT_BINS); - /* Initialize DC predictions to 0 */ - entropy->last_dc_val[ci] = 0; - entropy->dc_context[ci] = 0; - } - /* AC needs no table when not present */ - if (cinfo->Se) { - tbl = compptr->ac_tbl_no; - if (tbl < 0 || tbl >= NUM_ARITH_TBLS) - ERREXIT1(cinfo, JERR_NO_ARITH_TABLE, tbl); - if (entropy->ac_stats[tbl] == NULL) - entropy->ac_stats[tbl] = (unsigned char *) (*cinfo->mem->alloc_small) - ((j_common_ptr) cinfo, JPOOL_IMAGE, AC_STAT_BINS); - MEMZERO(entropy->ac_stats[tbl], AC_STAT_BINS); -#ifdef CALCULATE_SPECTRAL_CONDITIONING - if (cinfo->progressive_mode) - /* Section G.1.3.2: Set appropriate arithmetic conditioning value Kx */ - cinfo->arith_ac_K[tbl] = cinfo->Ss + ((8 + cinfo->Se - cinfo->Ss) >> 4); -#endif - } - } - - /* Initialize arithmetic encoding variables */ - entropy->c = 0; - entropy->a = 0x10000L; - entropy->sc = 0; - entropy->zc = 0; - entropy->ct = 11; - entropy->buffer = -1; /* empty */ - - /* Initialize restart stuff */ - entropy->restarts_to_go = cinfo->restart_interval; - entropy->next_restart_num = 0; -} - - -/* - * Module initialization routine for arithmetic entropy encoding. - */ - -GLOBAL(void) -jinit_arith_encoder (j_compress_ptr cinfo) -{ - arith_entropy_ptr entropy; - int i; - - entropy = (arith_entropy_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(arith_entropy_encoder)); - cinfo->entropy = (struct jpeg_entropy_encoder *) entropy; - entropy->pub.start_pass = start_pass; - entropy->pub.finish_pass = finish_pass; - - /* Mark tables unallocated */ - for (i = 0; i < NUM_ARITH_TBLS; i++) { - entropy->dc_stats[i] = NULL; - entropy->ac_stats[i] = NULL; - } - - /* Initialize index for fixed probability estimation */ - entropy->fixed_bin[0] = 113; -} diff --git a/jpeg/jccoefct.c b/jpeg/jccoefct.c deleted file mode 100755 index 924a703..0000000 --- a/jpeg/jccoefct.c +++ /dev/null @@ -1,454 +0,0 @@ -/* - * jccoefct.c - * - * Copyright (C) 1994-1997, Thomas G. Lane. - * Modified 2003-2011 by Guido Vollbeding. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains the coefficient buffer controller for compression. - * This controller is the top level of the JPEG compressor proper. - * The coefficient buffer lies between forward-DCT and entropy encoding steps. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* We use a full-image coefficient buffer when doing Huffman optimization, - * and also for writing multiple-scan JPEG files. In all cases, the DCT - * step is run during the first pass, and subsequent passes need only read - * the buffered coefficients. - */ -#ifdef ENTROPY_OPT_SUPPORTED -#define FULL_COEF_BUFFER_SUPPORTED -#else -#ifdef C_MULTISCAN_FILES_SUPPORTED -#define FULL_COEF_BUFFER_SUPPORTED -#endif -#endif - - -/* Private buffer controller object */ - -typedef struct { - struct jpeg_c_coef_controller pub; /* public fields */ - - JDIMENSION iMCU_row_num; /* iMCU row # within image */ - JDIMENSION mcu_ctr; /* counts MCUs processed in current row */ - int MCU_vert_offset; /* counts MCU rows within iMCU row */ - int MCU_rows_per_iMCU_row; /* number of such rows needed */ - - /* For single-pass compression, it's sufficient to buffer just one MCU - * (although this may prove a bit slow in practice). We allocate a - * workspace of C_MAX_BLOCKS_IN_MCU coefficient blocks, and reuse it for each - * MCU constructed and sent. (On 80x86, the workspace is FAR even though - * it's not really very big; this is to keep the module interfaces unchanged - * when a large coefficient buffer is necessary.) - * In multi-pass modes, this array points to the current MCU's blocks - * within the virtual arrays. - */ - JBLOCKROW MCU_buffer[C_MAX_BLOCKS_IN_MCU]; - - /* In multi-pass modes, we need a virtual block array for each component. */ - jvirt_barray_ptr whole_image[MAX_COMPONENTS]; -} my_coef_controller; - -typedef my_coef_controller * my_coef_ptr; - - -/* Forward declarations */ -METHODDEF(boolean) compress_data - JPP((j_compress_ptr cinfo, JSAMPIMAGE input_buf)); -#ifdef FULL_COEF_BUFFER_SUPPORTED -METHODDEF(boolean) compress_first_pass - JPP((j_compress_ptr cinfo, JSAMPIMAGE input_buf)); -METHODDEF(boolean) compress_output - JPP((j_compress_ptr cinfo, JSAMPIMAGE input_buf)); -#endif - - -LOCAL(void) -start_iMCU_row (j_compress_ptr cinfo) -/* Reset within-iMCU-row counters for a new row */ -{ - my_coef_ptr coef = (my_coef_ptr) cinfo->coef; - - /* In an interleaved scan, an MCU row is the same as an iMCU row. - * In a noninterleaved scan, an iMCU row has v_samp_factor MCU rows. - * But at the bottom of the image, process only what's left. - */ - if (cinfo->comps_in_scan > 1) { - coef->MCU_rows_per_iMCU_row = 1; - } else { - if (coef->iMCU_row_num < (cinfo->total_iMCU_rows-1)) - coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->v_samp_factor; - else - coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->last_row_height; - } - - coef->mcu_ctr = 0; - coef->MCU_vert_offset = 0; -} - - -/* - * Initialize for a processing pass. - */ - -METHODDEF(void) -start_pass_coef (j_compress_ptr cinfo, J_BUF_MODE pass_mode) -{ - my_coef_ptr coef = (my_coef_ptr) cinfo->coef; - - coef->iMCU_row_num = 0; - start_iMCU_row(cinfo); - - switch (pass_mode) { - case JBUF_PASS_THRU: - if (coef->whole_image[0] != NULL) - ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); - coef->pub.compress_data = compress_data; - break; -#ifdef FULL_COEF_BUFFER_SUPPORTED - case JBUF_SAVE_AND_PASS: - if (coef->whole_image[0] == NULL) - ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); - coef->pub.compress_data = compress_first_pass; - break; - case JBUF_CRANK_DEST: - if (coef->whole_image[0] == NULL) - ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); - coef->pub.compress_data = compress_output; - break; -#endif - default: - ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); - break; - } -} - - -/* - * Process some data in the single-pass case. - * We process the equivalent of one fully interleaved MCU row ("iMCU" row) - * per call, ie, v_samp_factor block rows for each component in the image. - * Returns TRUE if the iMCU row is completed, FALSE if suspended. - * - * NB: input_buf contains a plane for each component in image, - * which we index according to the component's SOF position. - */ - -METHODDEF(boolean) -compress_data (j_compress_ptr cinfo, JSAMPIMAGE input_buf) -{ - my_coef_ptr coef = (my_coef_ptr) cinfo->coef; - JDIMENSION MCU_col_num; /* index of current MCU within row */ - JDIMENSION last_MCU_col = cinfo->MCUs_per_row - 1; - JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1; - int blkn, bi, ci, yindex, yoffset, blockcnt; - JDIMENSION ypos, xpos; - jpeg_component_info *compptr; - forward_DCT_ptr forward_DCT; - - /* Loop to write as much as one whole iMCU row */ - for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row; - yoffset++) { - for (MCU_col_num = coef->mcu_ctr; MCU_col_num <= last_MCU_col; - MCU_col_num++) { - /* Determine where data comes from in input_buf and do the DCT thing. - * Each call on forward_DCT processes a horizontal row of DCT blocks - * as wide as an MCU; we rely on having allocated the MCU_buffer[] blocks - * sequentially. Dummy blocks at the right or bottom edge are filled in - * specially. The data in them does not matter for image reconstruction, - * so we fill them with values that will encode to the smallest amount of - * data, viz: all zeroes in the AC entries, DC entries equal to previous - * block's DC value. (Thanks to Thomas Kinsman for this idea.) - */ - blkn = 0; - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - compptr = cinfo->cur_comp_info[ci]; - forward_DCT = cinfo->fdct->forward_DCT[compptr->component_index]; - blockcnt = (MCU_col_num < last_MCU_col) ? compptr->MCU_width - : compptr->last_col_width; - xpos = MCU_col_num * compptr->MCU_sample_width; - ypos = yoffset * compptr->DCT_v_scaled_size; - /* ypos == (yoffset+yindex) * DCTSIZE */ - for (yindex = 0; yindex < compptr->MCU_height; yindex++) { - if (coef->iMCU_row_num < last_iMCU_row || - yoffset+yindex < compptr->last_row_height) { - (*forward_DCT) (cinfo, compptr, - input_buf[compptr->component_index], - coef->MCU_buffer[blkn], - ypos, xpos, (JDIMENSION) blockcnt); - if (blockcnt < compptr->MCU_width) { - /* Create some dummy blocks at the right edge of the image. */ - FMEMZERO((void FAR *) coef->MCU_buffer[blkn + blockcnt], - (compptr->MCU_width - blockcnt) * SIZEOF(JBLOCK)); - for (bi = blockcnt; bi < compptr->MCU_width; bi++) { - coef->MCU_buffer[blkn+bi][0][0] = coef->MCU_buffer[blkn+bi-1][0][0]; - } - } - } else { - /* Create a row of dummy blocks at the bottom of the image. */ - FMEMZERO((void FAR *) coef->MCU_buffer[blkn], - compptr->MCU_width * SIZEOF(JBLOCK)); - for (bi = 0; bi < compptr->MCU_width; bi++) { - coef->MCU_buffer[blkn+bi][0][0] = coef->MCU_buffer[blkn-1][0][0]; - } - } - blkn += compptr->MCU_width; - ypos += compptr->DCT_v_scaled_size; - } - } - /* Try to write the MCU. In event of a suspension failure, we will - * re-DCT the MCU on restart (a bit inefficient, could be fixed...) - */ - if (! (*cinfo->entropy->encode_mcu) (cinfo, coef->MCU_buffer)) { - /* Suspension forced; update state counters and exit */ - coef->MCU_vert_offset = yoffset; - coef->mcu_ctr = MCU_col_num; - return FALSE; - } - } - /* Completed an MCU row, but perhaps not an iMCU row */ - coef->mcu_ctr = 0; - } - /* Completed the iMCU row, advance counters for next one */ - coef->iMCU_row_num++; - start_iMCU_row(cinfo); - return TRUE; -} - - -#ifdef FULL_COEF_BUFFER_SUPPORTED - -/* - * Process some data in the first pass of a multi-pass case. - * We process the equivalent of one fully interleaved MCU row ("iMCU" row) - * per call, ie, v_samp_factor block rows for each component in the image. - * This amount of data is read from the source buffer, DCT'd and quantized, - * and saved into the virtual arrays. We also generate suitable dummy blocks - * as needed at the right and lower edges. (The dummy blocks are constructed - * in the virtual arrays, which have been padded appropriately.) This makes - * it possible for subsequent passes not to worry about real vs. dummy blocks. - * - * We must also emit the data to the entropy encoder. This is conveniently - * done by calling compress_output() after we've loaded the current strip - * of the virtual arrays. - * - * NB: input_buf contains a plane for each component in image. All - * components are DCT'd and loaded into the virtual arrays in this pass. - * However, it may be that only a subset of the components are emitted to - * the entropy encoder during this first pass; be careful about looking - * at the scan-dependent variables (MCU dimensions, etc). - */ - -METHODDEF(boolean) -compress_first_pass (j_compress_ptr cinfo, JSAMPIMAGE input_buf) -{ - my_coef_ptr coef = (my_coef_ptr) cinfo->coef; - JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1; - JDIMENSION blocks_across, MCUs_across, MCUindex; - int bi, ci, h_samp_factor, block_row, block_rows, ndummy; - JCOEF lastDC; - jpeg_component_info *compptr; - JBLOCKARRAY buffer; - JBLOCKROW thisblockrow, lastblockrow; - forward_DCT_ptr forward_DCT; - - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - /* Align the virtual buffer for this component. */ - buffer = (*cinfo->mem->access_virt_barray) - ((j_common_ptr) cinfo, coef->whole_image[ci], - coef->iMCU_row_num * compptr->v_samp_factor, - (JDIMENSION) compptr->v_samp_factor, TRUE); - /* Count non-dummy DCT block rows in this iMCU row. */ - if (coef->iMCU_row_num < last_iMCU_row) - block_rows = compptr->v_samp_factor; - else { - /* NB: can't use last_row_height here, since may not be set! */ - block_rows = (int) (compptr->height_in_blocks % compptr->v_samp_factor); - if (block_rows == 0) block_rows = compptr->v_samp_factor; - } - blocks_across = compptr->width_in_blocks; - h_samp_factor = compptr->h_samp_factor; - /* Count number of dummy blocks to be added at the right margin. */ - ndummy = (int) (blocks_across % h_samp_factor); - if (ndummy > 0) - ndummy = h_samp_factor - ndummy; - forward_DCT = cinfo->fdct->forward_DCT[ci]; - /* Perform DCT for all non-dummy blocks in this iMCU row. Each call - * on forward_DCT processes a complete horizontal row of DCT blocks. - */ - for (block_row = 0; block_row < block_rows; block_row++) { - thisblockrow = buffer[block_row]; - (*forward_DCT) (cinfo, compptr, input_buf[ci], thisblockrow, - (JDIMENSION) (block_row * compptr->DCT_v_scaled_size), - (JDIMENSION) 0, blocks_across); - if (ndummy > 0) { - /* Create dummy blocks at the right edge of the image. */ - thisblockrow += blocks_across; /* => first dummy block */ - FMEMZERO((void FAR *) thisblockrow, ndummy * SIZEOF(JBLOCK)); - lastDC = thisblockrow[-1][0]; - for (bi = 0; bi < ndummy; bi++) { - thisblockrow[bi][0] = lastDC; - } - } - } - /* If at end of image, create dummy block rows as needed. - * The tricky part here is that within each MCU, we want the DC values - * of the dummy blocks to match the last real block's DC value. - * This squeezes a few more bytes out of the resulting file... - */ - if (coef->iMCU_row_num == last_iMCU_row) { - blocks_across += ndummy; /* include lower right corner */ - MCUs_across = blocks_across / h_samp_factor; - for (block_row = block_rows; block_row < compptr->v_samp_factor; - block_row++) { - thisblockrow = buffer[block_row]; - lastblockrow = buffer[block_row-1]; - FMEMZERO((void FAR *) thisblockrow, - (size_t) (blocks_across * SIZEOF(JBLOCK))); - for (MCUindex = 0; MCUindex < MCUs_across; MCUindex++) { - lastDC = lastblockrow[h_samp_factor-1][0]; - for (bi = 0; bi < h_samp_factor; bi++) { - thisblockrow[bi][0] = lastDC; - } - thisblockrow += h_samp_factor; /* advance to next MCU in row */ - lastblockrow += h_samp_factor; - } - } - } - } - /* NB: compress_output will increment iMCU_row_num if successful. - * A suspension return will result in redoing all the work above next time. - */ - - /* Emit data to the entropy encoder, sharing code with subsequent passes */ - return compress_output(cinfo, input_buf); -} - - -/* - * Process some data in subsequent passes of a multi-pass case. - * We process the equivalent of one fully interleaved MCU row ("iMCU" row) - * per call, ie, v_samp_factor block rows for each component in the scan. - * The data is obtained from the virtual arrays and fed to the entropy coder. - * Returns TRUE if the iMCU row is completed, FALSE if suspended. - * - * NB: input_buf is ignored; it is likely to be a NULL pointer. - */ - -METHODDEF(boolean) -compress_output (j_compress_ptr cinfo, JSAMPIMAGE input_buf) -{ - my_coef_ptr coef = (my_coef_ptr) cinfo->coef; - JDIMENSION MCU_col_num; /* index of current MCU within row */ - int blkn, ci, xindex, yindex, yoffset; - JDIMENSION start_col; - JBLOCKARRAY buffer[MAX_COMPS_IN_SCAN]; - JBLOCKROW buffer_ptr; - jpeg_component_info *compptr; - - /* Align the virtual buffers for the components used in this scan. - * NB: during first pass, this is safe only because the buffers will - * already be aligned properly, so jmemmgr.c won't need to do any I/O. - */ - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - compptr = cinfo->cur_comp_info[ci]; - buffer[ci] = (*cinfo->mem->access_virt_barray) - ((j_common_ptr) cinfo, coef->whole_image[compptr->component_index], - coef->iMCU_row_num * compptr->v_samp_factor, - (JDIMENSION) compptr->v_samp_factor, FALSE); - } - - /* Loop to process one whole iMCU row */ - for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row; - yoffset++) { - for (MCU_col_num = coef->mcu_ctr; MCU_col_num < cinfo->MCUs_per_row; - MCU_col_num++) { - /* Construct list of pointers to DCT blocks belonging to this MCU */ - blkn = 0; /* index of current DCT block within MCU */ - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - compptr = cinfo->cur_comp_info[ci]; - start_col = MCU_col_num * compptr->MCU_width; - for (yindex = 0; yindex < compptr->MCU_height; yindex++) { - buffer_ptr = buffer[ci][yindex+yoffset] + start_col; - for (xindex = 0; xindex < compptr->MCU_width; xindex++) { - coef->MCU_buffer[blkn++] = buffer_ptr++; - } - } - } - /* Try to write the MCU. */ - if (! (*cinfo->entropy->encode_mcu) (cinfo, coef->MCU_buffer)) { - /* Suspension forced; update state counters and exit */ - coef->MCU_vert_offset = yoffset; - coef->mcu_ctr = MCU_col_num; - return FALSE; - } - } - /* Completed an MCU row, but perhaps not an iMCU row */ - coef->mcu_ctr = 0; - } - /* Completed the iMCU row, advance counters for next one */ - coef->iMCU_row_num++; - start_iMCU_row(cinfo); - return TRUE; -} - -#endif /* FULL_COEF_BUFFER_SUPPORTED */ - - -/* - * Initialize coefficient buffer controller. - */ - -GLOBAL(void) -jinit_c_coef_controller (j_compress_ptr cinfo, boolean need_full_buffer) -{ - my_coef_ptr coef; - - coef = (my_coef_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(my_coef_controller)); - cinfo->coef = (struct jpeg_c_coef_controller *) coef; - coef->pub.start_pass = start_pass_coef; - - /* Create the coefficient buffer. */ - if (need_full_buffer) { -#ifdef FULL_COEF_BUFFER_SUPPORTED - /* Allocate a full-image virtual array for each component, */ - /* padded to a multiple of samp_factor DCT blocks in each direction. */ - int ci; - jpeg_component_info *compptr; - - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - coef->whole_image[ci] = (*cinfo->mem->request_virt_barray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE, - (JDIMENSION) jround_up((long) compptr->width_in_blocks, - (long) compptr->h_samp_factor), - (JDIMENSION) jround_up((long) compptr->height_in_blocks, - (long) compptr->v_samp_factor), - (JDIMENSION) compptr->v_samp_factor); - } -#else - ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); -#endif - } else { - /* We only need a single-MCU buffer. */ - JBLOCKROW buffer; - int i; - - buffer = (JBLOCKROW) - (*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE, - C_MAX_BLOCKS_IN_MCU * SIZEOF(JBLOCK)); - for (i = 0; i < C_MAX_BLOCKS_IN_MCU; i++) { - coef->MCU_buffer[i] = buffer + i; - } - coef->whole_image[0] = NULL; /* flag for no virtual arrays */ - } -} diff --git a/jpeg/jccolor.c b/jpeg/jccolor.c deleted file mode 100755 index 3e2d0e9..0000000 --- a/jpeg/jccolor.c +++ /dev/null @@ -1,490 +0,0 @@ -/* - * jccolor.c - * - * Copyright (C) 1991-1996, Thomas G. Lane. - * Modified 2011 by Guido Vollbeding. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains input colorspace conversion routines. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* Private subobject */ - -typedef struct { - struct jpeg_color_converter pub; /* public fields */ - - /* Private state for RGB->YCC conversion */ - INT32 * rgb_ycc_tab; /* => table for RGB to YCbCr conversion */ -} my_color_converter; - -typedef my_color_converter * my_cconvert_ptr; - - -/**************** RGB -> YCbCr conversion: most common case **************/ - -/* - * YCbCr is defined per CCIR 601-1, except that Cb and Cr are - * normalized to the range 0..MAXJSAMPLE rather than -0.5 .. 0.5. - * The conversion equations to be implemented are therefore - * Y = 0.29900 * R + 0.58700 * G + 0.11400 * B - * Cb = -0.16874 * R - 0.33126 * G + 0.50000 * B + CENTERJSAMPLE - * Cr = 0.50000 * R - 0.41869 * G - 0.08131 * B + CENTERJSAMPLE - * (These numbers are derived from TIFF 6.0 section 21, dated 3-June-92.) - * Note: older versions of the IJG code used a zero offset of MAXJSAMPLE/2, - * rather than CENTERJSAMPLE, for Cb and Cr. This gave equal positive and - * negative swings for Cb/Cr, but meant that grayscale values (Cb=Cr=0) - * were not represented exactly. Now we sacrifice exact representation of - * maximum red and maximum blue in order to get exact grayscales. - * - * To avoid floating-point arithmetic, we represent the fractional constants - * as integers scaled up by 2^16 (about 4 digits precision); we have to divide - * the products by 2^16, with appropriate rounding, to get the correct answer. - * - * For even more speed, we avoid doing any multiplications in the inner loop - * by precalculating the constants times R,G,B for all possible values. - * For 8-bit JSAMPLEs this is very reasonable (only 256 entries per table); - * for 12-bit samples it is still acceptable. It's not very reasonable for - * 16-bit samples, but if you want lossless storage you shouldn't be changing - * colorspace anyway. - * The CENTERJSAMPLE offsets and the rounding fudge-factor of 0.5 are included - * in the tables to save adding them separately in the inner loop. - */ - -#define SCALEBITS 16 /* speediest right-shift on some machines */ -#define CBCR_OFFSET ((INT32) CENTERJSAMPLE << SCALEBITS) -#define ONE_HALF ((INT32) 1 << (SCALEBITS-1)) -#define FIX(x) ((INT32) ((x) * (1L< Y section */ -#define G_Y_OFF (1*(MAXJSAMPLE+1)) /* offset to G => Y section */ -#define B_Y_OFF (2*(MAXJSAMPLE+1)) /* etc. */ -#define R_CB_OFF (3*(MAXJSAMPLE+1)) -#define G_CB_OFF (4*(MAXJSAMPLE+1)) -#define B_CB_OFF (5*(MAXJSAMPLE+1)) -#define R_CR_OFF B_CB_OFF /* B=>Cb, R=>Cr are the same */ -#define G_CR_OFF (6*(MAXJSAMPLE+1)) -#define B_CR_OFF (7*(MAXJSAMPLE+1)) -#define TABLE_SIZE (8*(MAXJSAMPLE+1)) - - -/* - * Initialize for RGB->YCC colorspace conversion. - */ - -METHODDEF(void) -rgb_ycc_start (j_compress_ptr cinfo) -{ - my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; - INT32 * rgb_ycc_tab; - INT32 i; - - /* Allocate and fill in the conversion tables. */ - cconvert->rgb_ycc_tab = rgb_ycc_tab = (INT32 *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - (TABLE_SIZE * SIZEOF(INT32))); - - for (i = 0; i <= MAXJSAMPLE; i++) { - rgb_ycc_tab[i+R_Y_OFF] = FIX(0.29900) * i; - rgb_ycc_tab[i+G_Y_OFF] = FIX(0.58700) * i; - rgb_ycc_tab[i+B_Y_OFF] = FIX(0.11400) * i + ONE_HALF; - rgb_ycc_tab[i+R_CB_OFF] = (-FIX(0.16874)) * i; - rgb_ycc_tab[i+G_CB_OFF] = (-FIX(0.33126)) * i; - /* We use a rounding fudge-factor of 0.5-epsilon for Cb and Cr. - * This ensures that the maximum output will round to MAXJSAMPLE - * not MAXJSAMPLE+1, and thus that we don't have to range-limit. - */ - rgb_ycc_tab[i+B_CB_OFF] = FIX(0.50000) * i + CBCR_OFFSET + ONE_HALF-1; -/* B=>Cb and R=>Cr tables are the same - rgb_ycc_tab[i+R_CR_OFF] = FIX(0.50000) * i + CBCR_OFFSET + ONE_HALF-1; -*/ - rgb_ycc_tab[i+G_CR_OFF] = (-FIX(0.41869)) * i; - rgb_ycc_tab[i+B_CR_OFF] = (-FIX(0.08131)) * i; - } -} - - -/* - * Convert some rows of samples to the JPEG colorspace. - * - * Note that we change from the application's interleaved-pixel format - * to our internal noninterleaved, one-plane-per-component format. - * The input buffer is therefore three times as wide as the output buffer. - * - * A starting row offset is provided only for the output buffer. The caller - * can easily adjust the passed input_buf value to accommodate any row - * offset required on that side. - */ - -METHODDEF(void) -rgb_ycc_convert (j_compress_ptr cinfo, - JSAMPARRAY input_buf, JSAMPIMAGE output_buf, - JDIMENSION output_row, int num_rows) -{ - my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; - register int r, g, b; - register INT32 * ctab = cconvert->rgb_ycc_tab; - register JSAMPROW inptr; - register JSAMPROW outptr0, outptr1, outptr2; - register JDIMENSION col; - JDIMENSION num_cols = cinfo->image_width; - - while (--num_rows >= 0) { - inptr = *input_buf++; - outptr0 = output_buf[0][output_row]; - outptr1 = output_buf[1][output_row]; - outptr2 = output_buf[2][output_row]; - output_row++; - for (col = 0; col < num_cols; col++) { - r = GETJSAMPLE(inptr[RGB_RED]); - g = GETJSAMPLE(inptr[RGB_GREEN]); - b = GETJSAMPLE(inptr[RGB_BLUE]); - inptr += RGB_PIXELSIZE; - /* If the inputs are 0..MAXJSAMPLE, the outputs of these equations - * must be too; we do not need an explicit range-limiting operation. - * Hence the value being shifted is never negative, and we don't - * need the general RIGHT_SHIFT macro. - */ - /* Y */ - outptr0[col] = (JSAMPLE) - ((ctab[r+R_Y_OFF] + ctab[g+G_Y_OFF] + ctab[b+B_Y_OFF]) - >> SCALEBITS); - /* Cb */ - outptr1[col] = (JSAMPLE) - ((ctab[r+R_CB_OFF] + ctab[g+G_CB_OFF] + ctab[b+B_CB_OFF]) - >> SCALEBITS); - /* Cr */ - outptr2[col] = (JSAMPLE) - ((ctab[r+R_CR_OFF] + ctab[g+G_CR_OFF] + ctab[b+B_CR_OFF]) - >> SCALEBITS); - } - } -} - - -/**************** Cases other than RGB -> YCbCr **************/ - - -/* - * Convert some rows of samples to the JPEG colorspace. - * This version handles RGB->grayscale conversion, which is the same - * as the RGB->Y portion of RGB->YCbCr. - * We assume rgb_ycc_start has been called (we only use the Y tables). - */ - -METHODDEF(void) -rgb_gray_convert (j_compress_ptr cinfo, - JSAMPARRAY input_buf, JSAMPIMAGE output_buf, - JDIMENSION output_row, int num_rows) -{ - my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; - register int r, g, b; - register INT32 * ctab = cconvert->rgb_ycc_tab; - register JSAMPROW inptr; - register JSAMPROW outptr; - register JDIMENSION col; - JDIMENSION num_cols = cinfo->image_width; - - while (--num_rows >= 0) { - inptr = *input_buf++; - outptr = output_buf[0][output_row]; - output_row++; - for (col = 0; col < num_cols; col++) { - r = GETJSAMPLE(inptr[RGB_RED]); - g = GETJSAMPLE(inptr[RGB_GREEN]); - b = GETJSAMPLE(inptr[RGB_BLUE]); - inptr += RGB_PIXELSIZE; - /* Y */ - outptr[col] = (JSAMPLE) - ((ctab[r+R_Y_OFF] + ctab[g+G_Y_OFF] + ctab[b+B_Y_OFF]) - >> SCALEBITS); - } - } -} - - -/* - * Convert some rows of samples to the JPEG colorspace. - * This version handles Adobe-style CMYK->YCCK conversion, - * where we convert R=1-C, G=1-M, and B=1-Y to YCbCr using the same - * conversion as above, while passing K (black) unchanged. - * We assume rgb_ycc_start has been called. - */ - -METHODDEF(void) -cmyk_ycck_convert (j_compress_ptr cinfo, - JSAMPARRAY input_buf, JSAMPIMAGE output_buf, - JDIMENSION output_row, int num_rows) -{ - my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; - register int r, g, b; - register INT32 * ctab = cconvert->rgb_ycc_tab; - register JSAMPROW inptr; - register JSAMPROW outptr0, outptr1, outptr2, outptr3; - register JDIMENSION col; - JDIMENSION num_cols = cinfo->image_width; - - while (--num_rows >= 0) { - inptr = *input_buf++; - outptr0 = output_buf[0][output_row]; - outptr1 = output_buf[1][output_row]; - outptr2 = output_buf[2][output_row]; - outptr3 = output_buf[3][output_row]; - output_row++; - for (col = 0; col < num_cols; col++) { - r = MAXJSAMPLE - GETJSAMPLE(inptr[0]); - g = MAXJSAMPLE - GETJSAMPLE(inptr[1]); - b = MAXJSAMPLE - GETJSAMPLE(inptr[2]); - /* K passes through as-is */ - outptr3[col] = inptr[3]; /* don't need GETJSAMPLE here */ - inptr += 4; - /* If the inputs are 0..MAXJSAMPLE, the outputs of these equations - * must be too; we do not need an explicit range-limiting operation. - * Hence the value being shifted is never negative, and we don't - * need the general RIGHT_SHIFT macro. - */ - /* Y */ - outptr0[col] = (JSAMPLE) - ((ctab[r+R_Y_OFF] + ctab[g+G_Y_OFF] + ctab[b+B_Y_OFF]) - >> SCALEBITS); - /* Cb */ - outptr1[col] = (JSAMPLE) - ((ctab[r+R_CB_OFF] + ctab[g+G_CB_OFF] + ctab[b+B_CB_OFF]) - >> SCALEBITS); - /* Cr */ - outptr2[col] = (JSAMPLE) - ((ctab[r+R_CR_OFF] + ctab[g+G_CR_OFF] + ctab[b+B_CR_OFF]) - >> SCALEBITS); - } - } -} - - -/* - * Convert some rows of samples to the JPEG colorspace. - * This version handles grayscale output with no conversion. - * The source can be either plain grayscale or YCbCr (since Y == gray). - */ - -METHODDEF(void) -grayscale_convert (j_compress_ptr cinfo, - JSAMPARRAY input_buf, JSAMPIMAGE output_buf, - JDIMENSION output_row, int num_rows) -{ - register JSAMPROW inptr; - register JSAMPROW outptr; - register JDIMENSION col; - JDIMENSION num_cols = cinfo->image_width; - int instride = cinfo->input_components; - - while (--num_rows >= 0) { - inptr = *input_buf++; - outptr = output_buf[0][output_row]; - output_row++; - for (col = 0; col < num_cols; col++) { - outptr[col] = inptr[0]; /* don't need GETJSAMPLE() here */ - inptr += instride; - } - } -} - - -/* - * Convert some rows of samples to the JPEG colorspace. - * No colorspace conversion, but change from interleaved - * to separate-planes representation. - */ - -METHODDEF(void) -rgb_convert (j_compress_ptr cinfo, - JSAMPARRAY input_buf, JSAMPIMAGE output_buf, - JDIMENSION output_row, int num_rows) -{ - register JSAMPROW inptr; - register JSAMPROW outptr0, outptr1, outptr2; - register JDIMENSION col; - JDIMENSION num_cols = cinfo->image_width; - - while (--num_rows >= 0) { - inptr = *input_buf++; - outptr0 = output_buf[0][output_row]; - outptr1 = output_buf[1][output_row]; - outptr2 = output_buf[2][output_row]; - output_row++; - for (col = 0; col < num_cols; col++) { - /* We can dispense with GETJSAMPLE() here */ - outptr0[col] = inptr[RGB_RED]; - outptr1[col] = inptr[RGB_GREEN]; - outptr2[col] = inptr[RGB_BLUE]; - inptr += RGB_PIXELSIZE; - } - } -} - - -/* - * Convert some rows of samples to the JPEG colorspace. - * This version handles multi-component colorspaces without conversion. - * We assume input_components == num_components. - */ - -METHODDEF(void) -null_convert (j_compress_ptr cinfo, - JSAMPARRAY input_buf, JSAMPIMAGE output_buf, - JDIMENSION output_row, int num_rows) -{ - register JSAMPROW inptr; - register JSAMPROW outptr; - register JDIMENSION col; - register int ci; - int nc = cinfo->num_components; - JDIMENSION num_cols = cinfo->image_width; - - while (--num_rows >= 0) { - /* It seems fastest to make a separate pass for each component. */ - for (ci = 0; ci < nc; ci++) { - inptr = *input_buf; - outptr = output_buf[ci][output_row]; - for (col = 0; col < num_cols; col++) { - outptr[col] = inptr[ci]; /* don't need GETJSAMPLE() here */ - inptr += nc; - } - } - input_buf++; - output_row++; - } -} - - -/* - * Empty method for start_pass. - */ - -METHODDEF(void) -null_method (j_compress_ptr cinfo) -{ - /* no work needed */ -} - - -/* - * Module initialization routine for input colorspace conversion. - */ - -GLOBAL(void) -jinit_color_converter (j_compress_ptr cinfo) -{ - my_cconvert_ptr cconvert; - - cconvert = (my_cconvert_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(my_color_converter)); - cinfo->cconvert = (struct jpeg_color_converter *) cconvert; - /* set start_pass to null method until we find out differently */ - cconvert->pub.start_pass = null_method; - - /* Make sure input_components agrees with in_color_space */ - switch (cinfo->in_color_space) { - case JCS_GRAYSCALE: - if (cinfo->input_components != 1) - ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE); - break; - - case JCS_RGB: - if (cinfo->input_components != RGB_PIXELSIZE) - ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE); - break; - - case JCS_YCbCr: - if (cinfo->input_components != 3) - ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE); - break; - - case JCS_CMYK: - case JCS_YCCK: - if (cinfo->input_components != 4) - ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE); - break; - - default: /* JCS_UNKNOWN can be anything */ - if (cinfo->input_components < 1) - ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE); - break; - } - - /* Check num_components, set conversion method based on requested space */ - switch (cinfo->jpeg_color_space) { - case JCS_GRAYSCALE: - if (cinfo->num_components != 1) - ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); - if (cinfo->in_color_space == JCS_GRAYSCALE || - cinfo->in_color_space == JCS_YCbCr) - cconvert->pub.color_convert = grayscale_convert; - else if (cinfo->in_color_space == JCS_RGB) { - cconvert->pub.start_pass = rgb_ycc_start; - cconvert->pub.color_convert = rgb_gray_convert; - } else - ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); - break; - - case JCS_RGB: - if (cinfo->num_components != 3) - ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); - if (cinfo->in_color_space == JCS_RGB) - cconvert->pub.color_convert = rgb_convert; - else - ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); - break; - - case JCS_YCbCr: - if (cinfo->num_components != 3) - ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); - if (cinfo->in_color_space == JCS_RGB) { - cconvert->pub.start_pass = rgb_ycc_start; - cconvert->pub.color_convert = rgb_ycc_convert; - } else if (cinfo->in_color_space == JCS_YCbCr) - cconvert->pub.color_convert = null_convert; - else - ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); - break; - - case JCS_CMYK: - if (cinfo->num_components != 4) - ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); - if (cinfo->in_color_space == JCS_CMYK) - cconvert->pub.color_convert = null_convert; - else - ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); - break; - - case JCS_YCCK: - if (cinfo->num_components != 4) - ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); - if (cinfo->in_color_space == JCS_CMYK) { - cconvert->pub.start_pass = rgb_ycc_start; - cconvert->pub.color_convert = cmyk_ycck_convert; - } else if (cinfo->in_color_space == JCS_YCCK) - cconvert->pub.color_convert = null_convert; - else - ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); - break; - - default: /* allow null conversion of JCS_UNKNOWN */ - if (cinfo->jpeg_color_space != cinfo->in_color_space || - cinfo->num_components != cinfo->input_components) - ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); - cconvert->pub.color_convert = null_convert; - break; - } -} diff --git a/jpeg/jcdctmgr.c b/jpeg/jcdctmgr.c deleted file mode 100755 index 0bbdbb6..0000000 --- a/jpeg/jcdctmgr.c +++ /dev/null @@ -1,482 +0,0 @@ -/* - * jcdctmgr.c - * - * Copyright (C) 1994-1996, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains the forward-DCT management logic. - * This code selects a particular DCT implementation to be used, - * and it performs related housekeeping chores including coefficient - * quantization. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" -#include "jdct.h" /* Private declarations for DCT subsystem */ - - -/* Private subobject for this module */ - -typedef struct { - struct jpeg_forward_dct pub; /* public fields */ - - /* Pointer to the DCT routine actually in use */ - forward_DCT_method_ptr do_dct[MAX_COMPONENTS]; - - /* The actual post-DCT divisors --- not identical to the quant table - * entries, because of scaling (especially for an unnormalized DCT). - * Each table is given in normal array order. - */ - DCTELEM * divisors[NUM_QUANT_TBLS]; - -#ifdef DCT_FLOAT_SUPPORTED - /* Same as above for the floating-point case. */ - float_DCT_method_ptr do_float_dct[MAX_COMPONENTS]; - FAST_FLOAT * float_divisors[NUM_QUANT_TBLS]; -#endif -} my_fdct_controller; - -typedef my_fdct_controller * my_fdct_ptr; - - -/* The current scaled-DCT routines require ISLOW-style divisor tables, - * so be sure to compile that code if either ISLOW or SCALING is requested. - */ -#ifdef DCT_ISLOW_SUPPORTED -#define PROVIDE_ISLOW_TABLES -#else -#ifdef DCT_SCALING_SUPPORTED -#define PROVIDE_ISLOW_TABLES -#endif -#endif - - -/* - * Perform forward DCT on one or more blocks of a component. - * - * The input samples are taken from the sample_data[] array starting at - * position start_row/start_col, and moving to the right for any additional - * blocks. The quantized coefficients are returned in coef_blocks[]. - */ - -METHODDEF(void) -forward_DCT (j_compress_ptr cinfo, jpeg_component_info * compptr, - JSAMPARRAY sample_data, JBLOCKROW coef_blocks, - JDIMENSION start_row, JDIMENSION start_col, - JDIMENSION num_blocks) -/* This version is used for integer DCT implementations. */ -{ - /* This routine is heavily used, so it's worth coding it tightly. */ - my_fdct_ptr fdct = (my_fdct_ptr) cinfo->fdct; - forward_DCT_method_ptr do_dct = fdct->do_dct[compptr->component_index]; - DCTELEM * divisors = fdct->divisors[compptr->quant_tbl_no]; - DCTELEM workspace[DCTSIZE2]; /* work area for FDCT subroutine */ - JDIMENSION bi; - - sample_data += start_row; /* fold in the vertical offset once */ - - for (bi = 0; bi < num_blocks; bi++, start_col += compptr->DCT_h_scaled_size) { - /* Perform the DCT */ - (*do_dct) (workspace, sample_data, start_col); - - /* Quantize/descale the coefficients, and store into coef_blocks[] */ - { register DCTELEM temp, qval; - register int i; - register JCOEFPTR output_ptr = coef_blocks[bi]; - - for (i = 0; i < DCTSIZE2; i++) { - qval = divisors[i]; - temp = workspace[i]; - /* Divide the coefficient value by qval, ensuring proper rounding. - * Since C does not specify the direction of rounding for negative - * quotients, we have to force the dividend positive for portability. - * - * In most files, at least half of the output values will be zero - * (at default quantization settings, more like three-quarters...) - * so we should ensure that this case is fast. On many machines, - * a comparison is enough cheaper than a divide to make a special test - * a win. Since both inputs will be nonnegative, we need only test - * for a < b to discover whether a/b is 0. - * If your machine's division is fast enough, define FAST_DIVIDE. - */ -#ifdef FAST_DIVIDE -#define DIVIDE_BY(a,b) a /= b -#else -#define DIVIDE_BY(a,b) if (a >= b) a /= b; else a = 0 -#endif - if (temp < 0) { - temp = -temp; - temp += qval>>1; /* for rounding */ - DIVIDE_BY(temp, qval); - temp = -temp; - } else { - temp += qval>>1; /* for rounding */ - DIVIDE_BY(temp, qval); - } - output_ptr[i] = (JCOEF) temp; - } - } - } -} - - -#ifdef DCT_FLOAT_SUPPORTED - -METHODDEF(void) -forward_DCT_float (j_compress_ptr cinfo, jpeg_component_info * compptr, - JSAMPARRAY sample_data, JBLOCKROW coef_blocks, - JDIMENSION start_row, JDIMENSION start_col, - JDIMENSION num_blocks) -/* This version is used for floating-point DCT implementations. */ -{ - /* This routine is heavily used, so it's worth coding it tightly. */ - my_fdct_ptr fdct = (my_fdct_ptr) cinfo->fdct; - float_DCT_method_ptr do_dct = fdct->do_float_dct[compptr->component_index]; - FAST_FLOAT * divisors = fdct->float_divisors[compptr->quant_tbl_no]; - FAST_FLOAT workspace[DCTSIZE2]; /* work area for FDCT subroutine */ - JDIMENSION bi; - - sample_data += start_row; /* fold in the vertical offset once */ - - for (bi = 0; bi < num_blocks; bi++, start_col += compptr->DCT_h_scaled_size) { - /* Perform the DCT */ - (*do_dct) (workspace, sample_data, start_col); - - /* Quantize/descale the coefficients, and store into coef_blocks[] */ - { register FAST_FLOAT temp; - register int i; - register JCOEFPTR output_ptr = coef_blocks[bi]; - - for (i = 0; i < DCTSIZE2; i++) { - /* Apply the quantization and scaling factor */ - temp = workspace[i] * divisors[i]; - /* Round to nearest integer. - * Since C does not specify the direction of rounding for negative - * quotients, we have to force the dividend positive for portability. - * The maximum coefficient size is +-16K (for 12-bit data), so this - * code should work for either 16-bit or 32-bit ints. - */ - output_ptr[i] = (JCOEF) ((int) (temp + (FAST_FLOAT) 16384.5) - 16384); - } - } - } -} - -#endif /* DCT_FLOAT_SUPPORTED */ - - -/* - * Initialize for a processing pass. - * Verify that all referenced Q-tables are present, and set up - * the divisor table for each one. - * In the current implementation, DCT of all components is done during - * the first pass, even if only some components will be output in the - * first scan. Hence all components should be examined here. - */ - -METHODDEF(void) -start_pass_fdctmgr (j_compress_ptr cinfo) -{ - my_fdct_ptr fdct = (my_fdct_ptr) cinfo->fdct; - int ci, qtblno, i; - jpeg_component_info *compptr; - int method = 0; - JQUANT_TBL * qtbl; - DCTELEM * dtbl; - - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - /* Select the proper DCT routine for this component's scaling */ - switch ((compptr->DCT_h_scaled_size << 8) + compptr->DCT_v_scaled_size) { -#ifdef DCT_SCALING_SUPPORTED - case ((1 << 8) + 1): - fdct->do_dct[ci] = jpeg_fdct_1x1; - method = JDCT_ISLOW; /* jfdctint uses islow-style table */ - break; - case ((2 << 8) + 2): - fdct->do_dct[ci] = jpeg_fdct_2x2; - method = JDCT_ISLOW; /* jfdctint uses islow-style table */ - break; - case ((3 << 8) + 3): - fdct->do_dct[ci] = jpeg_fdct_3x3; - method = JDCT_ISLOW; /* jfdctint uses islow-style table */ - break; - case ((4 << 8) + 4): - fdct->do_dct[ci] = jpeg_fdct_4x4; - method = JDCT_ISLOW; /* jfdctint uses islow-style table */ - break; - case ((5 << 8) + 5): - fdct->do_dct[ci] = jpeg_fdct_5x5; - method = JDCT_ISLOW; /* jfdctint uses islow-style table */ - break; - case ((6 << 8) + 6): - fdct->do_dct[ci] = jpeg_fdct_6x6; - method = JDCT_ISLOW; /* jfdctint uses islow-style table */ - break; - case ((7 << 8) + 7): - fdct->do_dct[ci] = jpeg_fdct_7x7; - method = JDCT_ISLOW; /* jfdctint uses islow-style table */ - break; - case ((9 << 8) + 9): - fdct->do_dct[ci] = jpeg_fdct_9x9; - method = JDCT_ISLOW; /* jfdctint uses islow-style table */ - break; - case ((10 << 8) + 10): - fdct->do_dct[ci] = jpeg_fdct_10x10; - method = JDCT_ISLOW; /* jfdctint uses islow-style table */ - break; - case ((11 << 8) + 11): - fdct->do_dct[ci] = jpeg_fdct_11x11; - method = JDCT_ISLOW; /* jfdctint uses islow-style table */ - break; - case ((12 << 8) + 12): - fdct->do_dct[ci] = jpeg_fdct_12x12; - method = JDCT_ISLOW; /* jfdctint uses islow-style table */ - break; - case ((13 << 8) + 13): - fdct->do_dct[ci] = jpeg_fdct_13x13; - method = JDCT_ISLOW; /* jfdctint uses islow-style table */ - break; - case ((14 << 8) + 14): - fdct->do_dct[ci] = jpeg_fdct_14x14; - method = JDCT_ISLOW; /* jfdctint uses islow-style table */ - break; - case ((15 << 8) + 15): - fdct->do_dct[ci] = jpeg_fdct_15x15; - method = JDCT_ISLOW; /* jfdctint uses islow-style table */ - break; - case ((16 << 8) + 16): - fdct->do_dct[ci] = jpeg_fdct_16x16; - method = JDCT_ISLOW; /* jfdctint uses islow-style table */ - break; - case ((16 << 8) + 8): - fdct->do_dct[ci] = jpeg_fdct_16x8; - method = JDCT_ISLOW; /* jfdctint uses islow-style table */ - break; - case ((14 << 8) + 7): - fdct->do_dct[ci] = jpeg_fdct_14x7; - method = JDCT_ISLOW; /* jfdctint uses islow-style table */ - break; - case ((12 << 8) + 6): - fdct->do_dct[ci] = jpeg_fdct_12x6; - method = JDCT_ISLOW; /* jfdctint uses islow-style table */ - break; - case ((10 << 8) + 5): - fdct->do_dct[ci] = jpeg_fdct_10x5; - method = JDCT_ISLOW; /* jfdctint uses islow-style table */ - break; - case ((8 << 8) + 4): - fdct->do_dct[ci] = jpeg_fdct_8x4; - method = JDCT_ISLOW; /* jfdctint uses islow-style table */ - break; - case ((6 << 8) + 3): - fdct->do_dct[ci] = jpeg_fdct_6x3; - method = JDCT_ISLOW; /* jfdctint uses islow-style table */ - break; - case ((4 << 8) + 2): - fdct->do_dct[ci] = jpeg_fdct_4x2; - method = JDCT_ISLOW; /* jfdctint uses islow-style table */ - break; - case ((2 << 8) + 1): - fdct->do_dct[ci] = jpeg_fdct_2x1; - method = JDCT_ISLOW; /* jfdctint uses islow-style table */ - break; - case ((8 << 8) + 16): - fdct->do_dct[ci] = jpeg_fdct_8x16; - method = JDCT_ISLOW; /* jfdctint uses islow-style table */ - break; - case ((7 << 8) + 14): - fdct->do_dct[ci] = jpeg_fdct_7x14; - method = JDCT_ISLOW; /* jfdctint uses islow-style table */ - break; - case ((6 << 8) + 12): - fdct->do_dct[ci] = jpeg_fdct_6x12; - method = JDCT_ISLOW; /* jfdctint uses islow-style table */ - break; - case ((5 << 8) + 10): - fdct->do_dct[ci] = jpeg_fdct_5x10; - method = JDCT_ISLOW; /* jfdctint uses islow-style table */ - break; - case ((4 << 8) + 8): - fdct->do_dct[ci] = jpeg_fdct_4x8; - method = JDCT_ISLOW; /* jfdctint uses islow-style table */ - break; - case ((3 << 8) + 6): - fdct->do_dct[ci] = jpeg_fdct_3x6; - method = JDCT_ISLOW; /* jfdctint uses islow-style table */ - break; - case ((2 << 8) + 4): - fdct->do_dct[ci] = jpeg_fdct_2x4; - method = JDCT_ISLOW; /* jfdctint uses islow-style table */ - break; - case ((1 << 8) + 2): - fdct->do_dct[ci] = jpeg_fdct_1x2; - method = JDCT_ISLOW; /* jfdctint uses islow-style table */ - break; -#endif - case ((DCTSIZE << 8) + DCTSIZE): - switch (cinfo->dct_method) { -#ifdef DCT_ISLOW_SUPPORTED - case JDCT_ISLOW: - fdct->do_dct[ci] = jpeg_fdct_islow; - method = JDCT_ISLOW; - break; -#endif -#ifdef DCT_IFAST_SUPPORTED - case JDCT_IFAST: - fdct->do_dct[ci] = jpeg_fdct_ifast; - method = JDCT_IFAST; - break; -#endif -#ifdef DCT_FLOAT_SUPPORTED - case JDCT_FLOAT: - fdct->do_float_dct[ci] = jpeg_fdct_float; - method = JDCT_FLOAT; - break; -#endif - default: - ERREXIT(cinfo, JERR_NOT_COMPILED); - break; - } - break; - default: - ERREXIT2(cinfo, JERR_BAD_DCTSIZE, - compptr->DCT_h_scaled_size, compptr->DCT_v_scaled_size); - break; - } - qtblno = compptr->quant_tbl_no; - /* Make sure specified quantization table is present */ - if (qtblno < 0 || qtblno >= NUM_QUANT_TBLS || - cinfo->quant_tbl_ptrs[qtblno] == NULL) - ERREXIT1(cinfo, JERR_NO_QUANT_TABLE, qtblno); - qtbl = cinfo->quant_tbl_ptrs[qtblno]; - /* Compute divisors for this quant table */ - /* We may do this more than once for same table, but it's not a big deal */ - switch (method) { -#ifdef PROVIDE_ISLOW_TABLES - case JDCT_ISLOW: - /* For LL&M IDCT method, divisors are equal to raw quantization - * coefficients multiplied by 8 (to counteract scaling). - */ - if (fdct->divisors[qtblno] == NULL) { - fdct->divisors[qtblno] = (DCTELEM *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - DCTSIZE2 * SIZEOF(DCTELEM)); - } - dtbl = fdct->divisors[qtblno]; - for (i = 0; i < DCTSIZE2; i++) { - dtbl[i] = ((DCTELEM) qtbl->quantval[i]) << 3; - } - fdct->pub.forward_DCT[ci] = forward_DCT; - break; -#endif -#ifdef DCT_IFAST_SUPPORTED - case JDCT_IFAST: - { - /* For AA&N IDCT method, divisors are equal to quantization - * coefficients scaled by scalefactor[row]*scalefactor[col], where - * scalefactor[0] = 1 - * scalefactor[k] = cos(k*PI/16) * sqrt(2) for k=1..7 - * We apply a further scale factor of 8. - */ -#define CONST_BITS 14 - static const INT16 aanscales[DCTSIZE2] = { - /* precomputed values scaled up by 14 bits */ - 16384, 22725, 21407, 19266, 16384, 12873, 8867, 4520, - 22725, 31521, 29692, 26722, 22725, 17855, 12299, 6270, - 21407, 29692, 27969, 25172, 21407, 16819, 11585, 5906, - 19266, 26722, 25172, 22654, 19266, 15137, 10426, 5315, - 16384, 22725, 21407, 19266, 16384, 12873, 8867, 4520, - 12873, 17855, 16819, 15137, 12873, 10114, 6967, 3552, - 8867, 12299, 11585, 10426, 8867, 6967, 4799, 2446, - 4520, 6270, 5906, 5315, 4520, 3552, 2446, 1247 - }; - SHIFT_TEMPS - - if (fdct->divisors[qtblno] == NULL) { - fdct->divisors[qtblno] = (DCTELEM *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - DCTSIZE2 * SIZEOF(DCTELEM)); - } - dtbl = fdct->divisors[qtblno]; - for (i = 0; i < DCTSIZE2; i++) { - dtbl[i] = (DCTELEM) - DESCALE(MULTIPLY16V16((INT32) qtbl->quantval[i], - (INT32) aanscales[i]), - CONST_BITS-3); - } - } - fdct->pub.forward_DCT[ci] = forward_DCT; - break; -#endif -#ifdef DCT_FLOAT_SUPPORTED - case JDCT_FLOAT: - { - /* For float AA&N IDCT method, divisors are equal to quantization - * coefficients scaled by scalefactor[row]*scalefactor[col], where - * scalefactor[0] = 1 - * scalefactor[k] = cos(k*PI/16) * sqrt(2) for k=1..7 - * We apply a further scale factor of 8. - * What's actually stored is 1/divisor so that the inner loop can - * use a multiplication rather than a division. - */ - FAST_FLOAT * fdtbl; - int row, col; - static const double aanscalefactor[DCTSIZE] = { - 1.0, 1.387039845, 1.306562965, 1.175875602, - 1.0, 0.785694958, 0.541196100, 0.275899379 - }; - - if (fdct->float_divisors[qtblno] == NULL) { - fdct->float_divisors[qtblno] = (FAST_FLOAT *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - DCTSIZE2 * SIZEOF(FAST_FLOAT)); - } - fdtbl = fdct->float_divisors[qtblno]; - i = 0; - for (row = 0; row < DCTSIZE; row++) { - for (col = 0; col < DCTSIZE; col++) { - fdtbl[i] = (FAST_FLOAT) - (1.0 / (((double) qtbl->quantval[i] * - aanscalefactor[row] * aanscalefactor[col] * 8.0))); - i++; - } - } - } - fdct->pub.forward_DCT[ci] = forward_DCT_float; - break; -#endif - default: - ERREXIT(cinfo, JERR_NOT_COMPILED); - break; - } - } -} - - -/* - * Initialize FDCT manager. - */ - -GLOBAL(void) -jinit_forward_dct (j_compress_ptr cinfo) -{ - my_fdct_ptr fdct; - int i; - - fdct = (my_fdct_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(my_fdct_controller)); - cinfo->fdct = (struct jpeg_forward_dct *) fdct; - fdct->pub.start_pass = start_pass_fdctmgr; - - /* Mark divisor tables unallocated */ - for (i = 0; i < NUM_QUANT_TBLS; i++) { - fdct->divisors[i] = NULL; -#ifdef DCT_FLOAT_SUPPORTED - fdct->float_divisors[i] = NULL; -#endif - } -} diff --git a/jpeg/jchuff.c b/jpeg/jchuff.c deleted file mode 100755 index 257d7aa..0000000 --- a/jpeg/jchuff.c +++ /dev/null @@ -1,1576 +0,0 @@ -/* - * jchuff.c - * - * Copyright (C) 1991-1997, Thomas G. Lane. - * Modified 2006-2009 by Guido Vollbeding. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains Huffman entropy encoding routines. - * Both sequential and progressive modes are supported in this single module. - * - * Much of the complexity here has to do with supporting output suspension. - * If the data destination module demands suspension, we want to be able to - * back up to the start of the current MCU. To do this, we copy state - * variables into local working storage, and update them back to the - * permanent JPEG objects only upon successful completion of an MCU. - * - * We do not support output suspension for the progressive JPEG mode, since - * the library currently does not allow multiple-scan files to be written - * with output suspension. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* The legal range of a DCT coefficient is - * -1024 .. +1023 for 8-bit data; - * -16384 .. +16383 for 12-bit data. - * Hence the magnitude should always fit in 10 or 14 bits respectively. - */ - -#if BITS_IN_JSAMPLE == 8 -#define MAX_COEF_BITS 10 -#else -#define MAX_COEF_BITS 14 -#endif - -/* Derived data constructed for each Huffman table */ - -typedef struct { - unsigned int ehufco[256]; /* code for each symbol */ - char ehufsi[256]; /* length of code for each symbol */ - /* If no code has been allocated for a symbol S, ehufsi[S] contains 0 */ -} c_derived_tbl; - - -/* Expanded entropy encoder object for Huffman encoding. - * - * The savable_state subrecord contains fields that change within an MCU, - * but must not be updated permanently until we complete the MCU. - */ - -typedef struct { - INT32 put_buffer; /* current bit-accumulation buffer */ - int put_bits; /* # of bits now in it */ - int last_dc_val[MAX_COMPS_IN_SCAN]; /* last DC coef for each component */ -} savable_state; - -/* This macro is to work around compilers with missing or broken - * structure assignment. You'll need to fix this code if you have - * such a compiler and you change MAX_COMPS_IN_SCAN. - */ - -#ifndef NO_STRUCT_ASSIGN -#define ASSIGN_STATE(dest,src) ((dest) = (src)) -#else -#if MAX_COMPS_IN_SCAN == 4 -#define ASSIGN_STATE(dest,src) \ - ((dest).put_buffer = (src).put_buffer, \ - (dest).put_bits = (src).put_bits, \ - (dest).last_dc_val[0] = (src).last_dc_val[0], \ - (dest).last_dc_val[1] = (src).last_dc_val[1], \ - (dest).last_dc_val[2] = (src).last_dc_val[2], \ - (dest).last_dc_val[3] = (src).last_dc_val[3]) -#endif -#endif - - -typedef struct { - struct jpeg_entropy_encoder pub; /* public fields */ - - savable_state saved; /* Bit buffer & DC state at start of MCU */ - - /* These fields are NOT loaded into local working state. */ - unsigned int restarts_to_go; /* MCUs left in this restart interval */ - int next_restart_num; /* next restart number to write (0-7) */ - - /* Pointers to derived tables (these workspaces have image lifespan) */ - c_derived_tbl * dc_derived_tbls[NUM_HUFF_TBLS]; - c_derived_tbl * ac_derived_tbls[NUM_HUFF_TBLS]; - - /* Statistics tables for optimization */ - long * dc_count_ptrs[NUM_HUFF_TBLS]; - long * ac_count_ptrs[NUM_HUFF_TBLS]; - - /* Following fields used only in progressive mode */ - - /* Mode flag: TRUE for optimization, FALSE for actual data output */ - boolean gather_statistics; - - /* next_output_byte/free_in_buffer are local copies of cinfo->dest fields. - */ - JOCTET * next_output_byte; /* => next byte to write in buffer */ - size_t free_in_buffer; /* # of byte spaces remaining in buffer */ - j_compress_ptr cinfo; /* link to cinfo (needed for dump_buffer) */ - - /* Coding status for AC components */ - int ac_tbl_no; /* the table number of the single component */ - unsigned int EOBRUN; /* run length of EOBs */ - unsigned int BE; /* # of buffered correction bits before MCU */ - char * bit_buffer; /* buffer for correction bits (1 per char) */ - /* packing correction bits tightly would save some space but cost time... */ -} huff_entropy_encoder; - -typedef huff_entropy_encoder * huff_entropy_ptr; - -/* Working state while writing an MCU (sequential mode). - * This struct contains all the fields that are needed by subroutines. - */ - -typedef struct { - JOCTET * next_output_byte; /* => next byte to write in buffer */ - size_t free_in_buffer; /* # of byte spaces remaining in buffer */ - savable_state cur; /* Current bit buffer & DC state */ - j_compress_ptr cinfo; /* dump_buffer needs access to this */ -} working_state; - -/* MAX_CORR_BITS is the number of bits the AC refinement correction-bit - * buffer can hold. Larger sizes may slightly improve compression, but - * 1000 is already well into the realm of overkill. - * The minimum safe size is 64 bits. - */ - -#define MAX_CORR_BITS 1000 /* Max # of correction bits I can buffer */ - -/* IRIGHT_SHIFT is like RIGHT_SHIFT, but works on int rather than INT32. - * We assume that int right shift is unsigned if INT32 right shift is, - * which should be safe. - */ - -#ifdef RIGHT_SHIFT_IS_UNSIGNED -#define ISHIFT_TEMPS int ishift_temp; -#define IRIGHT_SHIFT(x,shft) \ - ((ishift_temp = (x)) < 0 ? \ - (ishift_temp >> (shft)) | ((~0) << (16-(shft))) : \ - (ishift_temp >> (shft))) -#else -#define ISHIFT_TEMPS -#define IRIGHT_SHIFT(x,shft) ((x) >> (shft)) -#endif - - -/* - * Compute the derived values for a Huffman table. - * This routine also performs some validation checks on the table. - */ - -LOCAL(void) -jpeg_make_c_derived_tbl (j_compress_ptr cinfo, boolean isDC, int tblno, - c_derived_tbl ** pdtbl) -{ - JHUFF_TBL *htbl; - c_derived_tbl *dtbl; - int p, i, l, lastp, si, maxsymbol; - char huffsize[257]; - unsigned int huffcode[257]; - unsigned int code; - - /* Note that huffsize[] and huffcode[] are filled in code-length order, - * paralleling the order of the symbols themselves in htbl->huffval[]. - */ - - /* Find the input Huffman table */ - if (tblno < 0 || tblno >= NUM_HUFF_TBLS) - ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tblno); - htbl = - isDC ? cinfo->dc_huff_tbl_ptrs[tblno] : cinfo->ac_huff_tbl_ptrs[tblno]; - if (htbl == NULL) - ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tblno); - - /* Allocate a workspace if we haven't already done so. */ - if (*pdtbl == NULL) - *pdtbl = (c_derived_tbl *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(c_derived_tbl)); - dtbl = *pdtbl; - - /* Figure C.1: make table of Huffman code length for each symbol */ - - p = 0; - for (l = 1; l <= 16; l++) { - i = (int) htbl->bits[l]; - if (i < 0 || p + i > 256) /* protect against table overrun */ - ERREXIT(cinfo, JERR_BAD_HUFF_TABLE); - while (i--) - huffsize[p++] = (char) l; - } - huffsize[p] = 0; - lastp = p; - - /* Figure C.2: generate the codes themselves */ - /* We also validate that the counts represent a legal Huffman code tree. */ - - code = 0; - si = huffsize[0]; - p = 0; - while (huffsize[p]) { - while (((int) huffsize[p]) == si) { - huffcode[p++] = code; - code++; - } - /* code is now 1 more than the last code used for codelength si; but - * it must still fit in si bits, since no code is allowed to be all ones. - */ - if (((INT32) code) >= (((INT32) 1) << si)) - ERREXIT(cinfo, JERR_BAD_HUFF_TABLE); - code <<= 1; - si++; - } - - /* Figure C.3: generate encoding tables */ - /* These are code and size indexed by symbol value */ - - /* Set all codeless symbols to have code length 0; - * this lets us detect duplicate VAL entries here, and later - * allows emit_bits to detect any attempt to emit such symbols. - */ - MEMZERO(dtbl->ehufsi, SIZEOF(dtbl->ehufsi)); - - /* This is also a convenient place to check for out-of-range - * and duplicated VAL entries. We allow 0..255 for AC symbols - * but only 0..15 for DC. (We could constrain them further - * based on data depth and mode, but this seems enough.) - */ - maxsymbol = isDC ? 15 : 255; - - for (p = 0; p < lastp; p++) { - i = htbl->huffval[p]; - if (i < 0 || i > maxsymbol || dtbl->ehufsi[i]) - ERREXIT(cinfo, JERR_BAD_HUFF_TABLE); - dtbl->ehufco[i] = huffcode[p]; - dtbl->ehufsi[i] = huffsize[p]; - } -} - - -/* Outputting bytes to the file. - * NB: these must be called only when actually outputting, - * that is, entropy->gather_statistics == FALSE. - */ - -/* Emit a byte, taking 'action' if must suspend. */ -#define emit_byte_s(state,val,action) \ - { *(state)->next_output_byte++ = (JOCTET) (val); \ - if (--(state)->free_in_buffer == 0) \ - if (! dump_buffer_s(state)) \ - { action; } } - -/* Emit a byte */ -#define emit_byte_e(entropy,val) \ - { *(entropy)->next_output_byte++ = (JOCTET) (val); \ - if (--(entropy)->free_in_buffer == 0) \ - dump_buffer_e(entropy); } - - -LOCAL(boolean) -dump_buffer_s (working_state * state) -/* Empty the output buffer; return TRUE if successful, FALSE if must suspend */ -{ - struct jpeg_destination_mgr * dest = state->cinfo->dest; - - if (! (*dest->empty_output_buffer) (state->cinfo)) - return FALSE; - /* After a successful buffer dump, must reset buffer pointers */ - state->next_output_byte = dest->next_output_byte; - state->free_in_buffer = dest->free_in_buffer; - return TRUE; -} - - -LOCAL(void) -dump_buffer_e (huff_entropy_ptr entropy) -/* Empty the output buffer; we do not support suspension in this case. */ -{ - struct jpeg_destination_mgr * dest = entropy->cinfo->dest; - - if (! (*dest->empty_output_buffer) (entropy->cinfo)) - ERREXIT(entropy->cinfo, JERR_CANT_SUSPEND); - /* After a successful buffer dump, must reset buffer pointers */ - entropy->next_output_byte = dest->next_output_byte; - entropy->free_in_buffer = dest->free_in_buffer; -} - - -/* Outputting bits to the file */ - -/* Only the right 24 bits of put_buffer are used; the valid bits are - * left-justified in this part. At most 16 bits can be passed to emit_bits - * in one call, and we never retain more than 7 bits in put_buffer - * between calls, so 24 bits are sufficient. - */ - -INLINE -LOCAL(boolean) -emit_bits_s (working_state * state, unsigned int code, int size) -/* Emit some bits; return TRUE if successful, FALSE if must suspend */ -{ - /* This routine is heavily used, so it's worth coding tightly. */ - register INT32 put_buffer = (INT32) code; - register int put_bits = state->cur.put_bits; - - /* if size is 0, caller used an invalid Huffman table entry */ - if (size == 0) - ERREXIT(state->cinfo, JERR_HUFF_MISSING_CODE); - - put_buffer &= (((INT32) 1)<cur.put_buffer; /* and merge with old buffer contents */ - - while (put_bits >= 8) { - int c = (int) ((put_buffer >> 16) & 0xFF); - - emit_byte_s(state, c, return FALSE); - if (c == 0xFF) { /* need to stuff a zero byte? */ - emit_byte_s(state, 0, return FALSE); - } - put_buffer <<= 8; - put_bits -= 8; - } - - state->cur.put_buffer = put_buffer; /* update state variables */ - state->cur.put_bits = put_bits; - - return TRUE; -} - - -INLINE -LOCAL(void) -emit_bits_e (huff_entropy_ptr entropy, unsigned int code, int size) -/* Emit some bits, unless we are in gather mode */ -{ - /* This routine is heavily used, so it's worth coding tightly. */ - register INT32 put_buffer = (INT32) code; - register int put_bits = entropy->saved.put_bits; - - /* if size is 0, caller used an invalid Huffman table entry */ - if (size == 0) - ERREXIT(entropy->cinfo, JERR_HUFF_MISSING_CODE); - - if (entropy->gather_statistics) - return; /* do nothing if we're only getting stats */ - - put_buffer &= (((INT32) 1)<saved.put_buffer; - - while (put_bits >= 8) { - int c = (int) ((put_buffer >> 16) & 0xFF); - - emit_byte_e(entropy, c); - if (c == 0xFF) { /* need to stuff a zero byte? */ - emit_byte_e(entropy, 0); - } - put_buffer <<= 8; - put_bits -= 8; - } - - entropy->saved.put_buffer = put_buffer; /* update variables */ - entropy->saved.put_bits = put_bits; -} - - -LOCAL(boolean) -flush_bits_s (working_state * state) -{ - if (! emit_bits_s(state, 0x7F, 7)) /* fill any partial byte with ones */ - return FALSE; - state->cur.put_buffer = 0; /* and reset bit-buffer to empty */ - state->cur.put_bits = 0; - return TRUE; -} - - -LOCAL(void) -flush_bits_e (huff_entropy_ptr entropy) -{ - emit_bits_e(entropy, 0x7F, 7); /* fill any partial byte with ones */ - entropy->saved.put_buffer = 0; /* and reset bit-buffer to empty */ - entropy->saved.put_bits = 0; -} - - -/* - * Emit (or just count) a Huffman symbol. - */ - -INLINE -LOCAL(void) -emit_dc_symbol (huff_entropy_ptr entropy, int tbl_no, int symbol) -{ - if (entropy->gather_statistics) - entropy->dc_count_ptrs[tbl_no][symbol]++; - else { - c_derived_tbl * tbl = entropy->dc_derived_tbls[tbl_no]; - emit_bits_e(entropy, tbl->ehufco[symbol], tbl->ehufsi[symbol]); - } -} - - -INLINE -LOCAL(void) -emit_ac_symbol (huff_entropy_ptr entropy, int tbl_no, int symbol) -{ - if (entropy->gather_statistics) - entropy->ac_count_ptrs[tbl_no][symbol]++; - else { - c_derived_tbl * tbl = entropy->ac_derived_tbls[tbl_no]; - emit_bits_e(entropy, tbl->ehufco[symbol], tbl->ehufsi[symbol]); - } -} - - -/* - * Emit bits from a correction bit buffer. - */ - -LOCAL(void) -emit_buffered_bits (huff_entropy_ptr entropy, char * bufstart, - unsigned int nbits) -{ - if (entropy->gather_statistics) - return; /* no real work */ - - while (nbits > 0) { - emit_bits_e(entropy, (unsigned int) (*bufstart), 1); - bufstart++; - nbits--; - } -} - - -/* - * Emit any pending EOBRUN symbol. - */ - -LOCAL(void) -emit_eobrun (huff_entropy_ptr entropy) -{ - register int temp, nbits; - - if (entropy->EOBRUN > 0) { /* if there is any pending EOBRUN */ - temp = entropy->EOBRUN; - nbits = 0; - while ((temp >>= 1)) - nbits++; - /* safety check: shouldn't happen given limited correction-bit buffer */ - if (nbits > 14) - ERREXIT(entropy->cinfo, JERR_HUFF_MISSING_CODE); - - emit_ac_symbol(entropy, entropy->ac_tbl_no, nbits << 4); - if (nbits) - emit_bits_e(entropy, entropy->EOBRUN, nbits); - - entropy->EOBRUN = 0; - - /* Emit any buffered correction bits */ - emit_buffered_bits(entropy, entropy->bit_buffer, entropy->BE); - entropy->BE = 0; - } -} - - -/* - * Emit a restart marker & resynchronize predictions. - */ - -LOCAL(boolean) -emit_restart_s (working_state * state, int restart_num) -{ - int ci; - - if (! flush_bits_s(state)) - return FALSE; - - emit_byte_s(state, 0xFF, return FALSE); - emit_byte_s(state, JPEG_RST0 + restart_num, return FALSE); - - /* Re-initialize DC predictions to 0 */ - for (ci = 0; ci < state->cinfo->comps_in_scan; ci++) - state->cur.last_dc_val[ci] = 0; - - /* The restart counter is not updated until we successfully write the MCU. */ - - return TRUE; -} - - -LOCAL(void) -emit_restart_e (huff_entropy_ptr entropy, int restart_num) -{ - int ci; - - emit_eobrun(entropy); - - if (! entropy->gather_statistics) { - flush_bits_e(entropy); - emit_byte_e(entropy, 0xFF); - emit_byte_e(entropy, JPEG_RST0 + restart_num); - } - - if (entropy->cinfo->Ss == 0) { - /* Re-initialize DC predictions to 0 */ - for (ci = 0; ci < entropy->cinfo->comps_in_scan; ci++) - entropy->saved.last_dc_val[ci] = 0; - } else { - /* Re-initialize all AC-related fields to 0 */ - entropy->EOBRUN = 0; - entropy->BE = 0; - } -} - - -/* - * MCU encoding for DC initial scan (either spectral selection, - * or first pass of successive approximation). - */ - -METHODDEF(boolean) -encode_mcu_DC_first (j_compress_ptr cinfo, JBLOCKROW *MCU_data) -{ - huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; - register int temp, temp2; - register int nbits; - int blkn, ci; - int Al = cinfo->Al; - JBLOCKROW block; - jpeg_component_info * compptr; - ISHIFT_TEMPS - - entropy->next_output_byte = cinfo->dest->next_output_byte; - entropy->free_in_buffer = cinfo->dest->free_in_buffer; - - /* Emit restart marker if needed */ - if (cinfo->restart_interval) - if (entropy->restarts_to_go == 0) - emit_restart_e(entropy, entropy->next_restart_num); - - /* Encode the MCU data blocks */ - for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { - block = MCU_data[blkn]; - ci = cinfo->MCU_membership[blkn]; - compptr = cinfo->cur_comp_info[ci]; - - /* Compute the DC value after the required point transform by Al. - * This is simply an arithmetic right shift. - */ - temp2 = IRIGHT_SHIFT((int) ((*block)[0]), Al); - - /* DC differences are figured on the point-transformed values. */ - temp = temp2 - entropy->saved.last_dc_val[ci]; - entropy->saved.last_dc_val[ci] = temp2; - - /* Encode the DC coefficient difference per section G.1.2.1 */ - temp2 = temp; - if (temp < 0) { - temp = -temp; /* temp is abs value of input */ - /* For a negative input, want temp2 = bitwise complement of abs(input) */ - /* This code assumes we are on a two's complement machine */ - temp2--; - } - - /* Find the number of bits needed for the magnitude of the coefficient */ - nbits = 0; - while (temp) { - nbits++; - temp >>= 1; - } - /* Check for out-of-range coefficient values. - * Since we're encoding a difference, the range limit is twice as much. - */ - if (nbits > MAX_COEF_BITS+1) - ERREXIT(cinfo, JERR_BAD_DCT_COEF); - - /* Count/emit the Huffman-coded symbol for the number of bits */ - emit_dc_symbol(entropy, compptr->dc_tbl_no, nbits); - - /* Emit that number of bits of the value, if positive, */ - /* or the complement of its magnitude, if negative. */ - if (nbits) /* emit_bits rejects calls with size 0 */ - emit_bits_e(entropy, (unsigned int) temp2, nbits); - } - - cinfo->dest->next_output_byte = entropy->next_output_byte; - cinfo->dest->free_in_buffer = entropy->free_in_buffer; - - /* Update restart-interval state too */ - if (cinfo->restart_interval) { - if (entropy->restarts_to_go == 0) { - entropy->restarts_to_go = cinfo->restart_interval; - entropy->next_restart_num++; - entropy->next_restart_num &= 7; - } - entropy->restarts_to_go--; - } - - return TRUE; -} - - -/* - * MCU encoding for AC initial scan (either spectral selection, - * or first pass of successive approximation). - */ - -METHODDEF(boolean) -encode_mcu_AC_first (j_compress_ptr cinfo, JBLOCKROW *MCU_data) -{ - huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; - register int temp, temp2; - register int nbits; - register int r, k; - int Se, Al; - const int * natural_order; - JBLOCKROW block; - - entropy->next_output_byte = cinfo->dest->next_output_byte; - entropy->free_in_buffer = cinfo->dest->free_in_buffer; - - /* Emit restart marker if needed */ - if (cinfo->restart_interval) - if (entropy->restarts_to_go == 0) - emit_restart_e(entropy, entropy->next_restart_num); - - Se = cinfo->Se; - Al = cinfo->Al; - natural_order = cinfo->natural_order; - - /* Encode the MCU data block */ - block = MCU_data[0]; - - /* Encode the AC coefficients per section G.1.2.2, fig. G.3 */ - - r = 0; /* r = run length of zeros */ - - for (k = cinfo->Ss; k <= Se; k++) { - if ((temp = (*block)[natural_order[k]]) == 0) { - r++; - continue; - } - /* We must apply the point transform by Al. For AC coefficients this - * is an integer division with rounding towards 0. To do this portably - * in C, we shift after obtaining the absolute value; so the code is - * interwoven with finding the abs value (temp) and output bits (temp2). - */ - if (temp < 0) { - temp = -temp; /* temp is abs value of input */ - temp >>= Al; /* apply the point transform */ - /* For a negative coef, want temp2 = bitwise complement of abs(coef) */ - temp2 = ~temp; - } else { - temp >>= Al; /* apply the point transform */ - temp2 = temp; - } - /* Watch out for case that nonzero coef is zero after point transform */ - if (temp == 0) { - r++; - continue; - } - - /* Emit any pending EOBRUN */ - if (entropy->EOBRUN > 0) - emit_eobrun(entropy); - /* if run length > 15, must emit special run-length-16 codes (0xF0) */ - while (r > 15) { - emit_ac_symbol(entropy, entropy->ac_tbl_no, 0xF0); - r -= 16; - } - - /* Find the number of bits needed for the magnitude of the coefficient */ - nbits = 1; /* there must be at least one 1 bit */ - while ((temp >>= 1)) - nbits++; - /* Check for out-of-range coefficient values */ - if (nbits > MAX_COEF_BITS) - ERREXIT(cinfo, JERR_BAD_DCT_COEF); - - /* Count/emit Huffman symbol for run length / number of bits */ - emit_ac_symbol(entropy, entropy->ac_tbl_no, (r << 4) + nbits); - - /* Emit that number of bits of the value, if positive, */ - /* or the complement of its magnitude, if negative. */ - emit_bits_e(entropy, (unsigned int) temp2, nbits); - - r = 0; /* reset zero run length */ - } - - if (r > 0) { /* If there are trailing zeroes, */ - entropy->EOBRUN++; /* count an EOB */ - if (entropy->EOBRUN == 0x7FFF) - emit_eobrun(entropy); /* force it out to avoid overflow */ - } - - cinfo->dest->next_output_byte = entropy->next_output_byte; - cinfo->dest->free_in_buffer = entropy->free_in_buffer; - - /* Update restart-interval state too */ - if (cinfo->restart_interval) { - if (entropy->restarts_to_go == 0) { - entropy->restarts_to_go = cinfo->restart_interval; - entropy->next_restart_num++; - entropy->next_restart_num &= 7; - } - entropy->restarts_to_go--; - } - - return TRUE; -} - - -/* - * MCU encoding for DC successive approximation refinement scan. - * Note: we assume such scans can be multi-component, although the spec - * is not very clear on the point. - */ - -METHODDEF(boolean) -encode_mcu_DC_refine (j_compress_ptr cinfo, JBLOCKROW *MCU_data) -{ - huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; - register int temp; - int blkn; - int Al = cinfo->Al; - JBLOCKROW block; - - entropy->next_output_byte = cinfo->dest->next_output_byte; - entropy->free_in_buffer = cinfo->dest->free_in_buffer; - - /* Emit restart marker if needed */ - if (cinfo->restart_interval) - if (entropy->restarts_to_go == 0) - emit_restart_e(entropy, entropy->next_restart_num); - - /* Encode the MCU data blocks */ - for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { - block = MCU_data[blkn]; - - /* We simply emit the Al'th bit of the DC coefficient value. */ - temp = (*block)[0]; - emit_bits_e(entropy, (unsigned int) (temp >> Al), 1); - } - - cinfo->dest->next_output_byte = entropy->next_output_byte; - cinfo->dest->free_in_buffer = entropy->free_in_buffer; - - /* Update restart-interval state too */ - if (cinfo->restart_interval) { - if (entropy->restarts_to_go == 0) { - entropy->restarts_to_go = cinfo->restart_interval; - entropy->next_restart_num++; - entropy->next_restart_num &= 7; - } - entropy->restarts_to_go--; - } - - return TRUE; -} - - -/* - * MCU encoding for AC successive approximation refinement scan. - */ - -METHODDEF(boolean) -encode_mcu_AC_refine (j_compress_ptr cinfo, JBLOCKROW *MCU_data) -{ - huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; - register int temp; - register int r, k; - int EOB; - char *BR_buffer; - unsigned int BR; - int Se, Al; - const int * natural_order; - JBLOCKROW block; - int absvalues[DCTSIZE2]; - - entropy->next_output_byte = cinfo->dest->next_output_byte; - entropy->free_in_buffer = cinfo->dest->free_in_buffer; - - /* Emit restart marker if needed */ - if (cinfo->restart_interval) - if (entropy->restarts_to_go == 0) - emit_restart_e(entropy, entropy->next_restart_num); - - Se = cinfo->Se; - Al = cinfo->Al; - natural_order = cinfo->natural_order; - - /* Encode the MCU data block */ - block = MCU_data[0]; - - /* It is convenient to make a pre-pass to determine the transformed - * coefficients' absolute values and the EOB position. - */ - EOB = 0; - for (k = cinfo->Ss; k <= Se; k++) { - temp = (*block)[natural_order[k]]; - /* We must apply the point transform by Al. For AC coefficients this - * is an integer division with rounding towards 0. To do this portably - * in C, we shift after obtaining the absolute value. - */ - if (temp < 0) - temp = -temp; /* temp is abs value of input */ - temp >>= Al; /* apply the point transform */ - absvalues[k] = temp; /* save abs value for main pass */ - if (temp == 1) - EOB = k; /* EOB = index of last newly-nonzero coef */ - } - - /* Encode the AC coefficients per section G.1.2.3, fig. G.7 */ - - r = 0; /* r = run length of zeros */ - BR = 0; /* BR = count of buffered bits added now */ - BR_buffer = entropy->bit_buffer + entropy->BE; /* Append bits to buffer */ - - for (k = cinfo->Ss; k <= Se; k++) { - if ((temp = absvalues[k]) == 0) { - r++; - continue; - } - - /* Emit any required ZRLs, but not if they can be folded into EOB */ - while (r > 15 && k <= EOB) { - /* emit any pending EOBRUN and the BE correction bits */ - emit_eobrun(entropy); - /* Emit ZRL */ - emit_ac_symbol(entropy, entropy->ac_tbl_no, 0xF0); - r -= 16; - /* Emit buffered correction bits that must be associated with ZRL */ - emit_buffered_bits(entropy, BR_buffer, BR); - BR_buffer = entropy->bit_buffer; /* BE bits are gone now */ - BR = 0; - } - - /* If the coef was previously nonzero, it only needs a correction bit. - * NOTE: a straight translation of the spec's figure G.7 would suggest - * that we also need to test r > 15. But if r > 15, we can only get here - * if k > EOB, which implies that this coefficient is not 1. - */ - if (temp > 1) { - /* The correction bit is the next bit of the absolute value. */ - BR_buffer[BR++] = (char) (temp & 1); - continue; - } - - /* Emit any pending EOBRUN and the BE correction bits */ - emit_eobrun(entropy); - - /* Count/emit Huffman symbol for run length / number of bits */ - emit_ac_symbol(entropy, entropy->ac_tbl_no, (r << 4) + 1); - - /* Emit output bit for newly-nonzero coef */ - temp = ((*block)[natural_order[k]] < 0) ? 0 : 1; - emit_bits_e(entropy, (unsigned int) temp, 1); - - /* Emit buffered correction bits that must be associated with this code */ - emit_buffered_bits(entropy, BR_buffer, BR); - BR_buffer = entropy->bit_buffer; /* BE bits are gone now */ - BR = 0; - r = 0; /* reset zero run length */ - } - - if (r > 0 || BR > 0) { /* If there are trailing zeroes, */ - entropy->EOBRUN++; /* count an EOB */ - entropy->BE += BR; /* concat my correction bits to older ones */ - /* We force out the EOB if we risk either: - * 1. overflow of the EOB counter; - * 2. overflow of the correction bit buffer during the next MCU. - */ - if (entropy->EOBRUN == 0x7FFF || entropy->BE > (MAX_CORR_BITS-DCTSIZE2+1)) - emit_eobrun(entropy); - } - - cinfo->dest->next_output_byte = entropy->next_output_byte; - cinfo->dest->free_in_buffer = entropy->free_in_buffer; - - /* Update restart-interval state too */ - if (cinfo->restart_interval) { - if (entropy->restarts_to_go == 0) { - entropy->restarts_to_go = cinfo->restart_interval; - entropy->next_restart_num++; - entropy->next_restart_num &= 7; - } - entropy->restarts_to_go--; - } - - return TRUE; -} - - -/* Encode a single block's worth of coefficients */ - -LOCAL(boolean) -encode_one_block (working_state * state, JCOEFPTR block, int last_dc_val, - c_derived_tbl *dctbl, c_derived_tbl *actbl) -{ - register int temp, temp2; - register int nbits; - register int k, r, i; - int Se = state->cinfo->lim_Se; - const int * natural_order = state->cinfo->natural_order; - - /* Encode the DC coefficient difference per section F.1.2.1 */ - - temp = temp2 = block[0] - last_dc_val; - - if (temp < 0) { - temp = -temp; /* temp is abs value of input */ - /* For a negative input, want temp2 = bitwise complement of abs(input) */ - /* This code assumes we are on a two's complement machine */ - temp2--; - } - - /* Find the number of bits needed for the magnitude of the coefficient */ - nbits = 0; - while (temp) { - nbits++; - temp >>= 1; - } - /* Check for out-of-range coefficient values. - * Since we're encoding a difference, the range limit is twice as much. - */ - if (nbits > MAX_COEF_BITS+1) - ERREXIT(state->cinfo, JERR_BAD_DCT_COEF); - - /* Emit the Huffman-coded symbol for the number of bits */ - if (! emit_bits_s(state, dctbl->ehufco[nbits], dctbl->ehufsi[nbits])) - return FALSE; - - /* Emit that number of bits of the value, if positive, */ - /* or the complement of its magnitude, if negative. */ - if (nbits) /* emit_bits rejects calls with size 0 */ - if (! emit_bits_s(state, (unsigned int) temp2, nbits)) - return FALSE; - - /* Encode the AC coefficients per section F.1.2.2 */ - - r = 0; /* r = run length of zeros */ - - for (k = 1; k <= Se; k++) { - if ((temp = block[natural_order[k]]) == 0) { - r++; - } else { - /* if run length > 15, must emit special run-length-16 codes (0xF0) */ - while (r > 15) { - if (! emit_bits_s(state, actbl->ehufco[0xF0], actbl->ehufsi[0xF0])) - return FALSE; - r -= 16; - } - - temp2 = temp; - if (temp < 0) { - temp = -temp; /* temp is abs value of input */ - /* This code assumes we are on a two's complement machine */ - temp2--; - } - - /* Find the number of bits needed for the magnitude of the coefficient */ - nbits = 1; /* there must be at least one 1 bit */ - while ((temp >>= 1)) - nbits++; - /* Check for out-of-range coefficient values */ - if (nbits > MAX_COEF_BITS) - ERREXIT(state->cinfo, JERR_BAD_DCT_COEF); - - /* Emit Huffman symbol for run length / number of bits */ - i = (r << 4) + nbits; - if (! emit_bits_s(state, actbl->ehufco[i], actbl->ehufsi[i])) - return FALSE; - - /* Emit that number of bits of the value, if positive, */ - /* or the complement of its magnitude, if negative. */ - if (! emit_bits_s(state, (unsigned int) temp2, nbits)) - return FALSE; - - r = 0; - } - } - - /* If the last coef(s) were zero, emit an end-of-block code */ - if (r > 0) - if (! emit_bits_s(state, actbl->ehufco[0], actbl->ehufsi[0])) - return FALSE; - - return TRUE; -} - - -/* - * Encode and output one MCU's worth of Huffman-compressed coefficients. - */ - -METHODDEF(boolean) -encode_mcu_huff (j_compress_ptr cinfo, JBLOCKROW *MCU_data) -{ - huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; - working_state state; - int blkn, ci; - jpeg_component_info * compptr; - - /* Load up working state */ - state.next_output_byte = cinfo->dest->next_output_byte; - state.free_in_buffer = cinfo->dest->free_in_buffer; - ASSIGN_STATE(state.cur, entropy->saved); - state.cinfo = cinfo; - - /* Emit restart marker if needed */ - if (cinfo->restart_interval) { - if (entropy->restarts_to_go == 0) - if (! emit_restart_s(&state, entropy->next_restart_num)) - return FALSE; - } - - /* Encode the MCU data blocks */ - for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { - ci = cinfo->MCU_membership[blkn]; - compptr = cinfo->cur_comp_info[ci]; - if (! encode_one_block(&state, - MCU_data[blkn][0], state.cur.last_dc_val[ci], - entropy->dc_derived_tbls[compptr->dc_tbl_no], - entropy->ac_derived_tbls[compptr->ac_tbl_no])) - return FALSE; - /* Update last_dc_val */ - state.cur.last_dc_val[ci] = MCU_data[blkn][0][0]; - } - - /* Completed MCU, so update state */ - cinfo->dest->next_output_byte = state.next_output_byte; - cinfo->dest->free_in_buffer = state.free_in_buffer; - ASSIGN_STATE(entropy->saved, state.cur); - - /* Update restart-interval state too */ - if (cinfo->restart_interval) { - if (entropy->restarts_to_go == 0) { - entropy->restarts_to_go = cinfo->restart_interval; - entropy->next_restart_num++; - entropy->next_restart_num &= 7; - } - entropy->restarts_to_go--; - } - - return TRUE; -} - - -/* - * Finish up at the end of a Huffman-compressed scan. - */ - -METHODDEF(void) -finish_pass_huff (j_compress_ptr cinfo) -{ - huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; - working_state state; - - if (cinfo->progressive_mode) { - entropy->next_output_byte = cinfo->dest->next_output_byte; - entropy->free_in_buffer = cinfo->dest->free_in_buffer; - - /* Flush out any buffered data */ - emit_eobrun(entropy); - flush_bits_e(entropy); - - cinfo->dest->next_output_byte = entropy->next_output_byte; - cinfo->dest->free_in_buffer = entropy->free_in_buffer; - } else { - /* Load up working state ... flush_bits needs it */ - state.next_output_byte = cinfo->dest->next_output_byte; - state.free_in_buffer = cinfo->dest->free_in_buffer; - ASSIGN_STATE(state.cur, entropy->saved); - state.cinfo = cinfo; - - /* Flush out the last data */ - if (! flush_bits_s(&state)) - ERREXIT(cinfo, JERR_CANT_SUSPEND); - - /* Update state */ - cinfo->dest->next_output_byte = state.next_output_byte; - cinfo->dest->free_in_buffer = state.free_in_buffer; - ASSIGN_STATE(entropy->saved, state.cur); - } -} - - -/* - * Huffman coding optimization. - * - * We first scan the supplied data and count the number of uses of each symbol - * that is to be Huffman-coded. (This process MUST agree with the code above.) - * Then we build a Huffman coding tree for the observed counts. - * Symbols which are not needed at all for the particular image are not - * assigned any code, which saves space in the DHT marker as well as in - * the compressed data. - */ - - -/* Process a single block's worth of coefficients */ - -LOCAL(void) -htest_one_block (j_compress_ptr cinfo, JCOEFPTR block, int last_dc_val, - long dc_counts[], long ac_counts[]) -{ - register int temp; - register int nbits; - register int k, r; - int Se = cinfo->lim_Se; - const int * natural_order = cinfo->natural_order; - - /* Encode the DC coefficient difference per section F.1.2.1 */ - - temp = block[0] - last_dc_val; - if (temp < 0) - temp = -temp; - - /* Find the number of bits needed for the magnitude of the coefficient */ - nbits = 0; - while (temp) { - nbits++; - temp >>= 1; - } - /* Check for out-of-range coefficient values. - * Since we're encoding a difference, the range limit is twice as much. - */ - if (nbits > MAX_COEF_BITS+1) - ERREXIT(cinfo, JERR_BAD_DCT_COEF); - - /* Count the Huffman symbol for the number of bits */ - dc_counts[nbits]++; - - /* Encode the AC coefficients per section F.1.2.2 */ - - r = 0; /* r = run length of zeros */ - - for (k = 1; k <= Se; k++) { - if ((temp = block[natural_order[k]]) == 0) { - r++; - } else { - /* if run length > 15, must emit special run-length-16 codes (0xF0) */ - while (r > 15) { - ac_counts[0xF0]++; - r -= 16; - } - - /* Find the number of bits needed for the magnitude of the coefficient */ - if (temp < 0) - temp = -temp; - - /* Find the number of bits needed for the magnitude of the coefficient */ - nbits = 1; /* there must be at least one 1 bit */ - while ((temp >>= 1)) - nbits++; - /* Check for out-of-range coefficient values */ - if (nbits > MAX_COEF_BITS) - ERREXIT(cinfo, JERR_BAD_DCT_COEF); - - /* Count Huffman symbol for run length / number of bits */ - ac_counts[(r << 4) + nbits]++; - - r = 0; - } - } - - /* If the last coef(s) were zero, emit an end-of-block code */ - if (r > 0) - ac_counts[0]++; -} - - -/* - * Trial-encode one MCU's worth of Huffman-compressed coefficients. - * No data is actually output, so no suspension return is possible. - */ - -METHODDEF(boolean) -encode_mcu_gather (j_compress_ptr cinfo, JBLOCKROW *MCU_data) -{ - huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; - int blkn, ci; - jpeg_component_info * compptr; - - /* Take care of restart intervals if needed */ - if (cinfo->restart_interval) { - if (entropy->restarts_to_go == 0) { - /* Re-initialize DC predictions to 0 */ - for (ci = 0; ci < cinfo->comps_in_scan; ci++) - entropy->saved.last_dc_val[ci] = 0; - /* Update restart state */ - entropy->restarts_to_go = cinfo->restart_interval; - } - entropy->restarts_to_go--; - } - - for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { - ci = cinfo->MCU_membership[blkn]; - compptr = cinfo->cur_comp_info[ci]; - htest_one_block(cinfo, MCU_data[blkn][0], entropy->saved.last_dc_val[ci], - entropy->dc_count_ptrs[compptr->dc_tbl_no], - entropy->ac_count_ptrs[compptr->ac_tbl_no]); - entropy->saved.last_dc_val[ci] = MCU_data[blkn][0][0]; - } - - return TRUE; -} - - -/* - * Generate the best Huffman code table for the given counts, fill htbl. - * - * The JPEG standard requires that no symbol be assigned a codeword of all - * one bits (so that padding bits added at the end of a compressed segment - * can't look like a valid code). Because of the canonical ordering of - * codewords, this just means that there must be an unused slot in the - * longest codeword length category. Section K.2 of the JPEG spec suggests - * reserving such a slot by pretending that symbol 256 is a valid symbol - * with count 1. In theory that's not optimal; giving it count zero but - * including it in the symbol set anyway should give a better Huffman code. - * But the theoretically better code actually seems to come out worse in - * practice, because it produces more all-ones bytes (which incur stuffed - * zero bytes in the final file). In any case the difference is tiny. - * - * The JPEG standard requires Huffman codes to be no more than 16 bits long. - * If some symbols have a very small but nonzero probability, the Huffman tree - * must be adjusted to meet the code length restriction. We currently use - * the adjustment method suggested in JPEG section K.2. This method is *not* - * optimal; it may not choose the best possible limited-length code. But - * typically only very-low-frequency symbols will be given less-than-optimal - * lengths, so the code is almost optimal. Experimental comparisons against - * an optimal limited-length-code algorithm indicate that the difference is - * microscopic --- usually less than a hundredth of a percent of total size. - * So the extra complexity of an optimal algorithm doesn't seem worthwhile. - */ - -LOCAL(void) -jpeg_gen_optimal_table (j_compress_ptr cinfo, JHUFF_TBL * htbl, long freq[]) -{ -#define MAX_CLEN 32 /* assumed maximum initial code length */ - UINT8 bits[MAX_CLEN+1]; /* bits[k] = # of symbols with code length k */ - int codesize[257]; /* codesize[k] = code length of symbol k */ - int others[257]; /* next symbol in current branch of tree */ - int c1, c2; - int p, i, j; - long v; - - /* This algorithm is explained in section K.2 of the JPEG standard */ - - MEMZERO(bits, SIZEOF(bits)); - MEMZERO(codesize, SIZEOF(codesize)); - for (i = 0; i < 257; i++) - others[i] = -1; /* init links to empty */ - - freq[256] = 1; /* make sure 256 has a nonzero count */ - /* Including the pseudo-symbol 256 in the Huffman procedure guarantees - * that no real symbol is given code-value of all ones, because 256 - * will be placed last in the largest codeword category. - */ - - /* Huffman's basic algorithm to assign optimal code lengths to symbols */ - - for (;;) { - /* Find the smallest nonzero frequency, set c1 = its symbol */ - /* In case of ties, take the larger symbol number */ - c1 = -1; - v = 1000000000L; - for (i = 0; i <= 256; i++) { - if (freq[i] && freq[i] <= v) { - v = freq[i]; - c1 = i; - } - } - - /* Find the next smallest nonzero frequency, set c2 = its symbol */ - /* In case of ties, take the larger symbol number */ - c2 = -1; - v = 1000000000L; - for (i = 0; i <= 256; i++) { - if (freq[i] && freq[i] <= v && i != c1) { - v = freq[i]; - c2 = i; - } - } - - /* Done if we've merged everything into one frequency */ - if (c2 < 0) - break; - - /* Else merge the two counts/trees */ - freq[c1] += freq[c2]; - freq[c2] = 0; - - /* Increment the codesize of everything in c1's tree branch */ - codesize[c1]++; - while (others[c1] >= 0) { - c1 = others[c1]; - codesize[c1]++; - } - - others[c1] = c2; /* chain c2 onto c1's tree branch */ - - /* Increment the codesize of everything in c2's tree branch */ - codesize[c2]++; - while (others[c2] >= 0) { - c2 = others[c2]; - codesize[c2]++; - } - } - - /* Now count the number of symbols of each code length */ - for (i = 0; i <= 256; i++) { - if (codesize[i]) { - /* The JPEG standard seems to think that this can't happen, */ - /* but I'm paranoid... */ - if (codesize[i] > MAX_CLEN) - ERREXIT(cinfo, JERR_HUFF_CLEN_OVERFLOW); - - bits[codesize[i]]++; - } - } - - /* JPEG doesn't allow symbols with code lengths over 16 bits, so if the pure - * Huffman procedure assigned any such lengths, we must adjust the coding. - * Here is what the JPEG spec says about how this next bit works: - * Since symbols are paired for the longest Huffman code, the symbols are - * removed from this length category two at a time. The prefix for the pair - * (which is one bit shorter) is allocated to one of the pair; then, - * skipping the BITS entry for that prefix length, a code word from the next - * shortest nonzero BITS entry is converted into a prefix for two code words - * one bit longer. - */ - - for (i = MAX_CLEN; i > 16; i--) { - while (bits[i] > 0) { - j = i - 2; /* find length of new prefix to be used */ - while (bits[j] == 0) - j--; - - bits[i] -= 2; /* remove two symbols */ - bits[i-1]++; /* one goes in this length */ - bits[j+1] += 2; /* two new symbols in this length */ - bits[j]--; /* symbol of this length is now a prefix */ - } - } - - /* Remove the count for the pseudo-symbol 256 from the largest codelength */ - while (bits[i] == 0) /* find largest codelength still in use */ - i--; - bits[i]--; - - /* Return final symbol counts (only for lengths 0..16) */ - MEMCOPY(htbl->bits, bits, SIZEOF(htbl->bits)); - - /* Return a list of the symbols sorted by code length */ - /* It's not real clear to me why we don't need to consider the codelength - * changes made above, but the JPEG spec seems to think this works. - */ - p = 0; - for (i = 1; i <= MAX_CLEN; i++) { - for (j = 0; j <= 255; j++) { - if (codesize[j] == i) { - htbl->huffval[p] = (UINT8) j; - p++; - } - } - } - - /* Set sent_table FALSE so updated table will be written to JPEG file. */ - htbl->sent_table = FALSE; -} - - -/* - * Finish up a statistics-gathering pass and create the new Huffman tables. - */ - -METHODDEF(void) -finish_pass_gather (j_compress_ptr cinfo) -{ - huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; - int ci, tbl; - jpeg_component_info * compptr; - JHUFF_TBL **htblptr; - boolean did_dc[NUM_HUFF_TBLS]; - boolean did_ac[NUM_HUFF_TBLS]; - - /* It's important not to apply jpeg_gen_optimal_table more than once - * per table, because it clobbers the input frequency counts! - */ - if (cinfo->progressive_mode) - /* Flush out buffered data (all we care about is counting the EOB symbol) */ - emit_eobrun(entropy); - - MEMZERO(did_dc, SIZEOF(did_dc)); - MEMZERO(did_ac, SIZEOF(did_ac)); - - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - compptr = cinfo->cur_comp_info[ci]; - /* DC needs no table for refinement scan */ - if (cinfo->Ss == 0 && cinfo->Ah == 0) { - tbl = compptr->dc_tbl_no; - if (! did_dc[tbl]) { - htblptr = & cinfo->dc_huff_tbl_ptrs[tbl]; - if (*htblptr == NULL) - *htblptr = jpeg_alloc_huff_table((j_common_ptr) cinfo); - jpeg_gen_optimal_table(cinfo, *htblptr, entropy->dc_count_ptrs[tbl]); - did_dc[tbl] = TRUE; - } - } - /* AC needs no table when not present */ - if (cinfo->Se) { - tbl = compptr->ac_tbl_no; - if (! did_ac[tbl]) { - htblptr = & cinfo->ac_huff_tbl_ptrs[tbl]; - if (*htblptr == NULL) - *htblptr = jpeg_alloc_huff_table((j_common_ptr) cinfo); - jpeg_gen_optimal_table(cinfo, *htblptr, entropy->ac_count_ptrs[tbl]); - did_ac[tbl] = TRUE; - } - } - } -} - - -/* - * Initialize for a Huffman-compressed scan. - * If gather_statistics is TRUE, we do not output anything during the scan, - * just count the Huffman symbols used and generate Huffman code tables. - */ - -METHODDEF(void) -start_pass_huff (j_compress_ptr cinfo, boolean gather_statistics) -{ - huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; - int ci, tbl; - jpeg_component_info * compptr; - - if (gather_statistics) - entropy->pub.finish_pass = finish_pass_gather; - else - entropy->pub.finish_pass = finish_pass_huff; - - if (cinfo->progressive_mode) { - entropy->cinfo = cinfo; - entropy->gather_statistics = gather_statistics; - - /* We assume jcmaster.c already validated the scan parameters. */ - - /* Select execution routine */ - if (cinfo->Ah == 0) { - if (cinfo->Ss == 0) - entropy->pub.encode_mcu = encode_mcu_DC_first; - else - entropy->pub.encode_mcu = encode_mcu_AC_first; - } else { - if (cinfo->Ss == 0) - entropy->pub.encode_mcu = encode_mcu_DC_refine; - else { - entropy->pub.encode_mcu = encode_mcu_AC_refine; - /* AC refinement needs a correction bit buffer */ - if (entropy->bit_buffer == NULL) - entropy->bit_buffer = (char *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - MAX_CORR_BITS * SIZEOF(char)); - } - } - - /* Initialize AC stuff */ - entropy->ac_tbl_no = cinfo->cur_comp_info[0]->ac_tbl_no; - entropy->EOBRUN = 0; - entropy->BE = 0; - } else { - if (gather_statistics) - entropy->pub.encode_mcu = encode_mcu_gather; - else - entropy->pub.encode_mcu = encode_mcu_huff; - } - - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - compptr = cinfo->cur_comp_info[ci]; - /* DC needs no table for refinement scan */ - if (cinfo->Ss == 0 && cinfo->Ah == 0) { - tbl = compptr->dc_tbl_no; - if (gather_statistics) { - /* Check for invalid table index */ - /* (make_c_derived_tbl does this in the other path) */ - if (tbl < 0 || tbl >= NUM_HUFF_TBLS) - ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tbl); - /* Allocate and zero the statistics tables */ - /* Note that jpeg_gen_optimal_table expects 257 entries in each table! */ - if (entropy->dc_count_ptrs[tbl] == NULL) - entropy->dc_count_ptrs[tbl] = (long *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - 257 * SIZEOF(long)); - MEMZERO(entropy->dc_count_ptrs[tbl], 257 * SIZEOF(long)); - } else { - /* Compute derived values for Huffman tables */ - /* We may do this more than once for a table, but it's not expensive */ - jpeg_make_c_derived_tbl(cinfo, TRUE, tbl, - & entropy->dc_derived_tbls[tbl]); - } - /* Initialize DC predictions to 0 */ - entropy->saved.last_dc_val[ci] = 0; - } - /* AC needs no table when not present */ - if (cinfo->Se) { - tbl = compptr->ac_tbl_no; - if (gather_statistics) { - if (tbl < 0 || tbl >= NUM_HUFF_TBLS) - ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tbl); - if (entropy->ac_count_ptrs[tbl] == NULL) - entropy->ac_count_ptrs[tbl] = (long *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - 257 * SIZEOF(long)); - MEMZERO(entropy->ac_count_ptrs[tbl], 257 * SIZEOF(long)); - } else { - jpeg_make_c_derived_tbl(cinfo, FALSE, tbl, - & entropy->ac_derived_tbls[tbl]); - } - } - } - - /* Initialize bit buffer to empty */ - entropy->saved.put_buffer = 0; - entropy->saved.put_bits = 0; - - /* Initialize restart stuff */ - entropy->restarts_to_go = cinfo->restart_interval; - entropy->next_restart_num = 0; -} - - -/* - * Module initialization routine for Huffman entropy encoding. - */ - -GLOBAL(void) -jinit_huff_encoder (j_compress_ptr cinfo) -{ - huff_entropy_ptr entropy; - int i; - - entropy = (huff_entropy_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(huff_entropy_encoder)); - cinfo->entropy = (struct jpeg_entropy_encoder *) entropy; - entropy->pub.start_pass = start_pass_huff; - - /* Mark tables unallocated */ - for (i = 0; i < NUM_HUFF_TBLS; i++) { - entropy->dc_derived_tbls[i] = entropy->ac_derived_tbls[i] = NULL; - entropy->dc_count_ptrs[i] = entropy->ac_count_ptrs[i] = NULL; - } - - if (cinfo->progressive_mode) - entropy->bit_buffer = NULL; /* needed only in AC refinement scan */ -} diff --git a/jpeg/jcinit.c b/jpeg/jcinit.c deleted file mode 100755 index 0ba310f..0000000 --- a/jpeg/jcinit.c +++ /dev/null @@ -1,65 +0,0 @@ -/* - * jcinit.c - * - * Copyright (C) 1991-1997, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains initialization logic for the JPEG compressor. - * This routine is in charge of selecting the modules to be executed and - * making an initialization call to each one. - * - * Logically, this code belongs in jcmaster.c. It's split out because - * linking this routine implies linking the entire compression library. - * For a transcoding-only application, we want to be able to use jcmaster.c - * without linking in the whole library. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* - * Master selection of compression modules. - * This is done once at the start of processing an image. We determine - * which modules will be used and give them appropriate initialization calls. - */ - -GLOBAL(void) -jinit_compress_master (j_compress_ptr cinfo) -{ - /* Initialize master control (includes parameter checking/processing) */ - jinit_c_master_control(cinfo, FALSE /* full compression */); - - /* Preprocessing */ - if (! cinfo->raw_data_in) { - jinit_color_converter(cinfo); - jinit_downsampler(cinfo); - jinit_c_prep_controller(cinfo, FALSE /* never need full buffer here */); - } - /* Forward DCT */ - jinit_forward_dct(cinfo); - /* Entropy encoding: either Huffman or arithmetic coding. */ - if (cinfo->arith_code) - jinit_arith_encoder(cinfo); - else { - jinit_huff_encoder(cinfo); - } - - /* Need a full-image coefficient buffer in any multi-pass mode. */ - jinit_c_coef_controller(cinfo, - (boolean) (cinfo->num_scans > 1 || cinfo->optimize_coding)); - jinit_c_main_controller(cinfo, FALSE /* never need full buffer here */); - - jinit_marker_writer(cinfo); - - /* We can now tell the memory manager to allocate virtual arrays. */ - (*cinfo->mem->realize_virt_arrays) ((j_common_ptr) cinfo); - - /* Write the datastream header (SOI) immediately. - * Frame and scan headers are postponed till later. - * This lets application insert special markers after the SOI. - */ - (*cinfo->marker->write_file_header) (cinfo); -} diff --git a/jpeg/jcmainct.c b/jpeg/jcmainct.c deleted file mode 100755 index 7de75d1..0000000 --- a/jpeg/jcmainct.c +++ /dev/null @@ -1,293 +0,0 @@ -/* - * jcmainct.c - * - * Copyright (C) 1994-1996, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains the main buffer controller for compression. - * The main buffer lies between the pre-processor and the JPEG - * compressor proper; it holds downsampled data in the JPEG colorspace. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* Note: currently, there is no operating mode in which a full-image buffer - * is needed at this step. If there were, that mode could not be used with - * "raw data" input, since this module is bypassed in that case. However, - * we've left the code here for possible use in special applications. - */ -#undef FULL_MAIN_BUFFER_SUPPORTED - - -/* Private buffer controller object */ - -typedef struct { - struct jpeg_c_main_controller pub; /* public fields */ - - JDIMENSION cur_iMCU_row; /* number of current iMCU row */ - JDIMENSION rowgroup_ctr; /* counts row groups received in iMCU row */ - boolean suspended; /* remember if we suspended output */ - J_BUF_MODE pass_mode; /* current operating mode */ - - /* If using just a strip buffer, this points to the entire set of buffers - * (we allocate one for each component). In the full-image case, this - * points to the currently accessible strips of the virtual arrays. - */ - JSAMPARRAY buffer[MAX_COMPONENTS]; - -#ifdef FULL_MAIN_BUFFER_SUPPORTED - /* If using full-image storage, this array holds pointers to virtual-array - * control blocks for each component. Unused if not full-image storage. - */ - jvirt_sarray_ptr whole_image[MAX_COMPONENTS]; -#endif -} my_main_controller; - -typedef my_main_controller * my_main_ptr; - - -/* Forward declarations */ -METHODDEF(void) process_data_simple_main - JPP((j_compress_ptr cinfo, JSAMPARRAY input_buf, - JDIMENSION *in_row_ctr, JDIMENSION in_rows_avail)); -#ifdef FULL_MAIN_BUFFER_SUPPORTED -METHODDEF(void) process_data_buffer_main - JPP((j_compress_ptr cinfo, JSAMPARRAY input_buf, - JDIMENSION *in_row_ctr, JDIMENSION in_rows_avail)); -#endif - - -/* - * Initialize for a processing pass. - */ - -METHODDEF(void) -start_pass_main (j_compress_ptr cinfo, J_BUF_MODE pass_mode) -{ - my_main_ptr main = (my_main_ptr) cinfo->main; - - /* Do nothing in raw-data mode. */ - if (cinfo->raw_data_in) - return; - - main->cur_iMCU_row = 0; /* initialize counters */ - main->rowgroup_ctr = 0; - main->suspended = FALSE; - main->pass_mode = pass_mode; /* save mode for use by process_data */ - - switch (pass_mode) { - case JBUF_PASS_THRU: -#ifdef FULL_MAIN_BUFFER_SUPPORTED - if (main->whole_image[0] != NULL) - ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); -#endif - main->pub.process_data = process_data_simple_main; - break; -#ifdef FULL_MAIN_BUFFER_SUPPORTED - case JBUF_SAVE_SOURCE: - case JBUF_CRANK_DEST: - case JBUF_SAVE_AND_PASS: - if (main->whole_image[0] == NULL) - ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); - main->pub.process_data = process_data_buffer_main; - break; -#endif - default: - ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); - break; - } -} - - -/* - * Process some data. - * This routine handles the simple pass-through mode, - * where we have only a strip buffer. - */ - -METHODDEF(void) -process_data_simple_main (j_compress_ptr cinfo, - JSAMPARRAY input_buf, JDIMENSION *in_row_ctr, - JDIMENSION in_rows_avail) -{ - my_main_ptr main = (my_main_ptr) cinfo->main; - - while (main->cur_iMCU_row < cinfo->total_iMCU_rows) { - /* Read input data if we haven't filled the main buffer yet */ - if (main->rowgroup_ctr < (JDIMENSION) cinfo->min_DCT_v_scaled_size) - (*cinfo->prep->pre_process_data) (cinfo, - input_buf, in_row_ctr, in_rows_avail, - main->buffer, &main->rowgroup_ctr, - (JDIMENSION) cinfo->min_DCT_v_scaled_size); - - /* If we don't have a full iMCU row buffered, return to application for - * more data. Note that preprocessor will always pad to fill the iMCU row - * at the bottom of the image. - */ - if (main->rowgroup_ctr != (JDIMENSION) cinfo->min_DCT_v_scaled_size) - return; - - /* Send the completed row to the compressor */ - if (! (*cinfo->coef->compress_data) (cinfo, main->buffer)) { - /* If compressor did not consume the whole row, then we must need to - * suspend processing and return to the application. In this situation - * we pretend we didn't yet consume the last input row; otherwise, if - * it happened to be the last row of the image, the application would - * think we were done. - */ - if (! main->suspended) { - (*in_row_ctr)--; - main->suspended = TRUE; - } - return; - } - /* We did finish the row. Undo our little suspension hack if a previous - * call suspended; then mark the main buffer empty. - */ - if (main->suspended) { - (*in_row_ctr)++; - main->suspended = FALSE; - } - main->rowgroup_ctr = 0; - main->cur_iMCU_row++; - } -} - - -#ifdef FULL_MAIN_BUFFER_SUPPORTED - -/* - * Process some data. - * This routine handles all of the modes that use a full-size buffer. - */ - -METHODDEF(void) -process_data_buffer_main (j_compress_ptr cinfo, - JSAMPARRAY input_buf, JDIMENSION *in_row_ctr, - JDIMENSION in_rows_avail) -{ - my_main_ptr main = (my_main_ptr) cinfo->main; - int ci; - jpeg_component_info *compptr; - boolean writing = (main->pass_mode != JBUF_CRANK_DEST); - - while (main->cur_iMCU_row < cinfo->total_iMCU_rows) { - /* Realign the virtual buffers if at the start of an iMCU row. */ - if (main->rowgroup_ctr == 0) { - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - main->buffer[ci] = (*cinfo->mem->access_virt_sarray) - ((j_common_ptr) cinfo, main->whole_image[ci], - main->cur_iMCU_row * (compptr->v_samp_factor * DCTSIZE), - (JDIMENSION) (compptr->v_samp_factor * DCTSIZE), writing); - } - /* In a read pass, pretend we just read some source data. */ - if (! writing) { - *in_row_ctr += cinfo->max_v_samp_factor * DCTSIZE; - main->rowgroup_ctr = DCTSIZE; - } - } - - /* If a write pass, read input data until the current iMCU row is full. */ - /* Note: preprocessor will pad if necessary to fill the last iMCU row. */ - if (writing) { - (*cinfo->prep->pre_process_data) (cinfo, - input_buf, in_row_ctr, in_rows_avail, - main->buffer, &main->rowgroup_ctr, - (JDIMENSION) DCTSIZE); - /* Return to application if we need more data to fill the iMCU row. */ - if (main->rowgroup_ctr < DCTSIZE) - return; - } - - /* Emit data, unless this is a sink-only pass. */ - if (main->pass_mode != JBUF_SAVE_SOURCE) { - if (! (*cinfo->coef->compress_data) (cinfo, main->buffer)) { - /* If compressor did not consume the whole row, then we must need to - * suspend processing and return to the application. In this situation - * we pretend we didn't yet consume the last input row; otherwise, if - * it happened to be the last row of the image, the application would - * think we were done. - */ - if (! main->suspended) { - (*in_row_ctr)--; - main->suspended = TRUE; - } - return; - } - /* We did finish the row. Undo our little suspension hack if a previous - * call suspended; then mark the main buffer empty. - */ - if (main->suspended) { - (*in_row_ctr)++; - main->suspended = FALSE; - } - } - - /* If get here, we are done with this iMCU row. Mark buffer empty. */ - main->rowgroup_ctr = 0; - main->cur_iMCU_row++; - } -} - -#endif /* FULL_MAIN_BUFFER_SUPPORTED */ - - -/* - * Initialize main buffer controller. - */ - -GLOBAL(void) -jinit_c_main_controller (j_compress_ptr cinfo, boolean need_full_buffer) -{ - my_main_ptr main; - int ci; - jpeg_component_info *compptr; - - main = (my_main_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(my_main_controller)); - cinfo->main = (struct jpeg_c_main_controller *) main; - main->pub.start_pass = start_pass_main; - - /* We don't need to create a buffer in raw-data mode. */ - if (cinfo->raw_data_in) - return; - - /* Create the buffer. It holds downsampled data, so each component - * may be of a different size. - */ - if (need_full_buffer) { -#ifdef FULL_MAIN_BUFFER_SUPPORTED - /* Allocate a full-image virtual array for each component */ - /* Note we pad the bottom to a multiple of the iMCU height */ - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - main->whole_image[ci] = (*cinfo->mem->request_virt_sarray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE, - compptr->width_in_blocks * compptr->DCT_h_scaled_size, - (JDIMENSION) jround_up((long) compptr->height_in_blocks, - (long) compptr->v_samp_factor) * DCTSIZE, - (JDIMENSION) (compptr->v_samp_factor * compptr->DCT_v_scaled_size)); - } -#else - ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); -#endif - } else { -#ifdef FULL_MAIN_BUFFER_SUPPORTED - main->whole_image[0] = NULL; /* flag for no virtual arrays */ -#endif - /* Allocate a strip buffer for each component */ - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - main->buffer[ci] = (*cinfo->mem->alloc_sarray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, - compptr->width_in_blocks * compptr->DCT_h_scaled_size, - (JDIMENSION) (compptr->v_samp_factor * compptr->DCT_v_scaled_size)); - } - } -} diff --git a/jpeg/jcmarker.c b/jpeg/jcmarker.c deleted file mode 100755 index 606c19a..0000000 --- a/jpeg/jcmarker.c +++ /dev/null @@ -1,682 +0,0 @@ -/* - * jcmarker.c - * - * Copyright (C) 1991-1998, Thomas G. Lane. - * Modified 2003-2010 by Guido Vollbeding. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains routines to write JPEG datastream markers. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -typedef enum { /* JPEG marker codes */ - M_SOF0 = 0xc0, - M_SOF1 = 0xc1, - M_SOF2 = 0xc2, - M_SOF3 = 0xc3, - - M_SOF5 = 0xc5, - M_SOF6 = 0xc6, - M_SOF7 = 0xc7, - - M_JPG = 0xc8, - M_SOF9 = 0xc9, - M_SOF10 = 0xca, - M_SOF11 = 0xcb, - - M_SOF13 = 0xcd, - M_SOF14 = 0xce, - M_SOF15 = 0xcf, - - M_DHT = 0xc4, - - M_DAC = 0xcc, - - M_RST0 = 0xd0, - M_RST1 = 0xd1, - M_RST2 = 0xd2, - M_RST3 = 0xd3, - M_RST4 = 0xd4, - M_RST5 = 0xd5, - M_RST6 = 0xd6, - M_RST7 = 0xd7, - - M_SOI = 0xd8, - M_EOI = 0xd9, - M_SOS = 0xda, - M_DQT = 0xdb, - M_DNL = 0xdc, - M_DRI = 0xdd, - M_DHP = 0xde, - M_EXP = 0xdf, - - M_APP0 = 0xe0, - M_APP1 = 0xe1, - M_APP2 = 0xe2, - M_APP3 = 0xe3, - M_APP4 = 0xe4, - M_APP5 = 0xe5, - M_APP6 = 0xe6, - M_APP7 = 0xe7, - M_APP8 = 0xe8, - M_APP9 = 0xe9, - M_APP10 = 0xea, - M_APP11 = 0xeb, - M_APP12 = 0xec, - M_APP13 = 0xed, - M_APP14 = 0xee, - M_APP15 = 0xef, - - M_JPG0 = 0xf0, - M_JPG13 = 0xfd, - M_COM = 0xfe, - - M_TEM = 0x01, - - M_ERROR = 0x100 -} JPEG_MARKER; - - -/* Private state */ - -typedef struct { - struct jpeg_marker_writer pub; /* public fields */ - - unsigned int last_restart_interval; /* last DRI value emitted; 0 after SOI */ -} my_marker_writer; - -typedef my_marker_writer * my_marker_ptr; - - -/* - * Basic output routines. - * - * Note that we do not support suspension while writing a marker. - * Therefore, an application using suspension must ensure that there is - * enough buffer space for the initial markers (typ. 600-700 bytes) before - * calling jpeg_start_compress, and enough space to write the trailing EOI - * (a few bytes) before calling jpeg_finish_compress. Multipass compression - * modes are not supported at all with suspension, so those two are the only - * points where markers will be written. - */ - -LOCAL(void) -emit_byte (j_compress_ptr cinfo, int val) -/* Emit a byte */ -{ - struct jpeg_destination_mgr * dest = cinfo->dest; - - *(dest->next_output_byte)++ = (JOCTET) val; - if (--dest->free_in_buffer == 0) { - if (! (*dest->empty_output_buffer) (cinfo)) - ERREXIT(cinfo, JERR_CANT_SUSPEND); - } -} - - -LOCAL(void) -emit_marker (j_compress_ptr cinfo, JPEG_MARKER mark) -/* Emit a marker code */ -{ - emit_byte(cinfo, 0xFF); - emit_byte(cinfo, (int) mark); -} - - -LOCAL(void) -emit_2bytes (j_compress_ptr cinfo, int value) -/* Emit a 2-byte integer; these are always MSB first in JPEG files */ -{ - emit_byte(cinfo, (value >> 8) & 0xFF); - emit_byte(cinfo, value & 0xFF); -} - - -/* - * Routines to write specific marker types. - */ - -LOCAL(int) -emit_dqt (j_compress_ptr cinfo, int index) -/* Emit a DQT marker */ -/* Returns the precision used (0 = 8bits, 1 = 16bits) for baseline checking */ -{ - JQUANT_TBL * qtbl = cinfo->quant_tbl_ptrs[index]; - int prec; - int i; - - if (qtbl == NULL) - ERREXIT1(cinfo, JERR_NO_QUANT_TABLE, index); - - prec = 0; - for (i = 0; i <= cinfo->lim_Se; i++) { - if (qtbl->quantval[cinfo->natural_order[i]] > 255) - prec = 1; - } - - if (! qtbl->sent_table) { - emit_marker(cinfo, M_DQT); - - emit_2bytes(cinfo, - prec ? cinfo->lim_Se * 2 + 2 + 1 + 2 : cinfo->lim_Se + 1 + 1 + 2); - - emit_byte(cinfo, index + (prec<<4)); - - for (i = 0; i <= cinfo->lim_Se; i++) { - /* The table entries must be emitted in zigzag order. */ - unsigned int qval = qtbl->quantval[cinfo->natural_order[i]]; - if (prec) - emit_byte(cinfo, (int) (qval >> 8)); - emit_byte(cinfo, (int) (qval & 0xFF)); - } - - qtbl->sent_table = TRUE; - } - - return prec; -} - - -LOCAL(void) -emit_dht (j_compress_ptr cinfo, int index, boolean is_ac) -/* Emit a DHT marker */ -{ - JHUFF_TBL * htbl; - int length, i; - - if (is_ac) { - htbl = cinfo->ac_huff_tbl_ptrs[index]; - index += 0x10; /* output index has AC bit set */ - } else { - htbl = cinfo->dc_huff_tbl_ptrs[index]; - } - - if (htbl == NULL) - ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, index); - - if (! htbl->sent_table) { - emit_marker(cinfo, M_DHT); - - length = 0; - for (i = 1; i <= 16; i++) - length += htbl->bits[i]; - - emit_2bytes(cinfo, length + 2 + 1 + 16); - emit_byte(cinfo, index); - - for (i = 1; i <= 16; i++) - emit_byte(cinfo, htbl->bits[i]); - - for (i = 0; i < length; i++) - emit_byte(cinfo, htbl->huffval[i]); - - htbl->sent_table = TRUE; - } -} - - -LOCAL(void) -emit_dac (j_compress_ptr cinfo) -/* Emit a DAC marker */ -/* Since the useful info is so small, we want to emit all the tables in */ -/* one DAC marker. Therefore this routine does its own scan of the table. */ -{ -#ifdef C_ARITH_CODING_SUPPORTED - char dc_in_use[NUM_ARITH_TBLS]; - char ac_in_use[NUM_ARITH_TBLS]; - int length, i; - jpeg_component_info *compptr; - - for (i = 0; i < NUM_ARITH_TBLS; i++) - dc_in_use[i] = ac_in_use[i] = 0; - - for (i = 0; i < cinfo->comps_in_scan; i++) { - compptr = cinfo->cur_comp_info[i]; - /* DC needs no table for refinement scan */ - if (cinfo->Ss == 0 && cinfo->Ah == 0) - dc_in_use[compptr->dc_tbl_no] = 1; - /* AC needs no table when not present */ - if (cinfo->Se) - ac_in_use[compptr->ac_tbl_no] = 1; - } - - length = 0; - for (i = 0; i < NUM_ARITH_TBLS; i++) - length += dc_in_use[i] + ac_in_use[i]; - - if (length) { - emit_marker(cinfo, M_DAC); - - emit_2bytes(cinfo, length*2 + 2); - - for (i = 0; i < NUM_ARITH_TBLS; i++) { - if (dc_in_use[i]) { - emit_byte(cinfo, i); - emit_byte(cinfo, cinfo->arith_dc_L[i] + (cinfo->arith_dc_U[i]<<4)); - } - if (ac_in_use[i]) { - emit_byte(cinfo, i + 0x10); - emit_byte(cinfo, cinfo->arith_ac_K[i]); - } - } - } -#endif /* C_ARITH_CODING_SUPPORTED */ -} - - -LOCAL(void) -emit_dri (j_compress_ptr cinfo) -/* Emit a DRI marker */ -{ - emit_marker(cinfo, M_DRI); - - emit_2bytes(cinfo, 4); /* fixed length */ - - emit_2bytes(cinfo, (int) cinfo->restart_interval); -} - - -LOCAL(void) -emit_sof (j_compress_ptr cinfo, JPEG_MARKER code) -/* Emit a SOF marker */ -{ - int ci; - jpeg_component_info *compptr; - - emit_marker(cinfo, code); - - emit_2bytes(cinfo, 3 * cinfo->num_components + 2 + 5 + 1); /* length */ - - /* Make sure image isn't bigger than SOF field can handle */ - if ((long) cinfo->jpeg_height > 65535L || - (long) cinfo->jpeg_width > 65535L) - ERREXIT1(cinfo, JERR_IMAGE_TOO_BIG, (unsigned int) 65535); - - emit_byte(cinfo, cinfo->data_precision); - emit_2bytes(cinfo, (int) cinfo->jpeg_height); - emit_2bytes(cinfo, (int) cinfo->jpeg_width); - - emit_byte(cinfo, cinfo->num_components); - - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - emit_byte(cinfo, compptr->component_id); - emit_byte(cinfo, (compptr->h_samp_factor << 4) + compptr->v_samp_factor); - emit_byte(cinfo, compptr->quant_tbl_no); - } -} - - -LOCAL(void) -emit_sos (j_compress_ptr cinfo) -/* Emit a SOS marker */ -{ - int i, td, ta; - jpeg_component_info *compptr; - - emit_marker(cinfo, M_SOS); - - emit_2bytes(cinfo, 2 * cinfo->comps_in_scan + 2 + 1 + 3); /* length */ - - emit_byte(cinfo, cinfo->comps_in_scan); - - for (i = 0; i < cinfo->comps_in_scan; i++) { - compptr = cinfo->cur_comp_info[i]; - emit_byte(cinfo, compptr->component_id); - - /* We emit 0 for unused field(s); this is recommended by the P&M text - * but does not seem to be specified in the standard. - */ - - /* DC needs no table for refinement scan */ - td = cinfo->Ss == 0 && cinfo->Ah == 0 ? compptr->dc_tbl_no : 0; - /* AC needs no table when not present */ - ta = cinfo->Se ? compptr->ac_tbl_no : 0; - - emit_byte(cinfo, (td << 4) + ta); - } - - emit_byte(cinfo, cinfo->Ss); - emit_byte(cinfo, cinfo->Se); - emit_byte(cinfo, (cinfo->Ah << 4) + cinfo->Al); -} - - -LOCAL(void) -emit_pseudo_sos (j_compress_ptr cinfo) -/* Emit a pseudo SOS marker */ -{ - emit_marker(cinfo, M_SOS); - - emit_2bytes(cinfo, 2 + 1 + 3); /* length */ - - emit_byte(cinfo, 0); /* Ns */ - - emit_byte(cinfo, 0); /* Ss */ - emit_byte(cinfo, cinfo->block_size * cinfo->block_size - 1); /* Se */ - emit_byte(cinfo, 0); /* Ah/Al */ -} - - -LOCAL(void) -emit_jfif_app0 (j_compress_ptr cinfo) -/* Emit a JFIF-compliant APP0 marker */ -{ - /* - * Length of APP0 block (2 bytes) - * Block ID (4 bytes - ASCII "JFIF") - * Zero byte (1 byte to terminate the ID string) - * Version Major, Minor (2 bytes - major first) - * Units (1 byte - 0x00 = none, 0x01 = inch, 0x02 = cm) - * Xdpu (2 bytes - dots per unit horizontal) - * Ydpu (2 bytes - dots per unit vertical) - * Thumbnail X size (1 byte) - * Thumbnail Y size (1 byte) - */ - - emit_marker(cinfo, M_APP0); - - emit_2bytes(cinfo, 2 + 4 + 1 + 2 + 1 + 2 + 2 + 1 + 1); /* length */ - - emit_byte(cinfo, 0x4A); /* Identifier: ASCII "JFIF" */ - emit_byte(cinfo, 0x46); - emit_byte(cinfo, 0x49); - emit_byte(cinfo, 0x46); - emit_byte(cinfo, 0); - emit_byte(cinfo, cinfo->JFIF_major_version); /* Version fields */ - emit_byte(cinfo, cinfo->JFIF_minor_version); - emit_byte(cinfo, cinfo->density_unit); /* Pixel size information */ - emit_2bytes(cinfo, (int) cinfo->X_density); - emit_2bytes(cinfo, (int) cinfo->Y_density); - emit_byte(cinfo, 0); /* No thumbnail image */ - emit_byte(cinfo, 0); -} - - -LOCAL(void) -emit_adobe_app14 (j_compress_ptr cinfo) -/* Emit an Adobe APP14 marker */ -{ - /* - * Length of APP14 block (2 bytes) - * Block ID (5 bytes - ASCII "Adobe") - * Version Number (2 bytes - currently 100) - * Flags0 (2 bytes - currently 0) - * Flags1 (2 bytes - currently 0) - * Color transform (1 byte) - * - * Although Adobe TN 5116 mentions Version = 101, all the Adobe files - * now in circulation seem to use Version = 100, so that's what we write. - * - * We write the color transform byte as 1 if the JPEG color space is - * YCbCr, 2 if it's YCCK, 0 otherwise. Adobe's definition has to do with - * whether the encoder performed a transformation, which is pretty useless. - */ - - emit_marker(cinfo, M_APP14); - - emit_2bytes(cinfo, 2 + 5 + 2 + 2 + 2 + 1); /* length */ - - emit_byte(cinfo, 0x41); /* Identifier: ASCII "Adobe" */ - emit_byte(cinfo, 0x64); - emit_byte(cinfo, 0x6F); - emit_byte(cinfo, 0x62); - emit_byte(cinfo, 0x65); - emit_2bytes(cinfo, 100); /* Version */ - emit_2bytes(cinfo, 0); /* Flags0 */ - emit_2bytes(cinfo, 0); /* Flags1 */ - switch (cinfo->jpeg_color_space) { - case JCS_YCbCr: - emit_byte(cinfo, 1); /* Color transform = 1 */ - break; - case JCS_YCCK: - emit_byte(cinfo, 2); /* Color transform = 2 */ - break; - default: - emit_byte(cinfo, 0); /* Color transform = 0 */ - break; - } -} - - -/* - * These routines allow writing an arbitrary marker with parameters. - * The only intended use is to emit COM or APPn markers after calling - * write_file_header and before calling write_frame_header. - * Other uses are not guaranteed to produce desirable results. - * Counting the parameter bytes properly is the caller's responsibility. - */ - -METHODDEF(void) -write_marker_header (j_compress_ptr cinfo, int marker, unsigned int datalen) -/* Emit an arbitrary marker header */ -{ - if (datalen > (unsigned int) 65533) /* safety check */ - ERREXIT(cinfo, JERR_BAD_LENGTH); - - emit_marker(cinfo, (JPEG_MARKER) marker); - - emit_2bytes(cinfo, (int) (datalen + 2)); /* total length */ -} - -METHODDEF(void) -write_marker_byte (j_compress_ptr cinfo, int val) -/* Emit one byte of marker parameters following write_marker_header */ -{ - emit_byte(cinfo, val); -} - - -/* - * Write datastream header. - * This consists of an SOI and optional APPn markers. - * We recommend use of the JFIF marker, but not the Adobe marker, - * when using YCbCr or grayscale data. The JFIF marker should NOT - * be used for any other JPEG colorspace. The Adobe marker is helpful - * to distinguish RGB, CMYK, and YCCK colorspaces. - * Note that an application can write additional header markers after - * jpeg_start_compress returns. - */ - -METHODDEF(void) -write_file_header (j_compress_ptr cinfo) -{ - my_marker_ptr marker = (my_marker_ptr) cinfo->marker; - - emit_marker(cinfo, M_SOI); /* first the SOI */ - - /* SOI is defined to reset restart interval to 0 */ - marker->last_restart_interval = 0; - - if (cinfo->write_JFIF_header) /* next an optional JFIF APP0 */ - emit_jfif_app0(cinfo); - if (cinfo->write_Adobe_marker) /* next an optional Adobe APP14 */ - emit_adobe_app14(cinfo); -} - - -/* - * Write frame header. - * This consists of DQT and SOFn markers, and a conditional pseudo SOS marker. - * Note that we do not emit the SOF until we have emitted the DQT(s). - * This avoids compatibility problems with incorrect implementations that - * try to error-check the quant table numbers as soon as they see the SOF. - */ - -METHODDEF(void) -write_frame_header (j_compress_ptr cinfo) -{ - int ci, prec; - boolean is_baseline; - jpeg_component_info *compptr; - - /* Emit DQT for each quantization table. - * Note that emit_dqt() suppresses any duplicate tables. - */ - prec = 0; - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - prec += emit_dqt(cinfo, compptr->quant_tbl_no); - } - /* now prec is nonzero iff there are any 16-bit quant tables. */ - - /* Check for a non-baseline specification. - * Note we assume that Huffman table numbers won't be changed later. - */ - if (cinfo->arith_code || cinfo->progressive_mode || - cinfo->data_precision != 8 || cinfo->block_size != DCTSIZE) { - is_baseline = FALSE; - } else { - is_baseline = TRUE; - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - if (compptr->dc_tbl_no > 1 || compptr->ac_tbl_no > 1) - is_baseline = FALSE; - } - if (prec && is_baseline) { - is_baseline = FALSE; - /* If it's baseline except for quantizer size, warn the user */ - TRACEMS(cinfo, 0, JTRC_16BIT_TABLES); - } - } - - /* Emit the proper SOF marker */ - if (cinfo->arith_code) { - if (cinfo->progressive_mode) - emit_sof(cinfo, M_SOF10); /* SOF code for progressive arithmetic */ - else - emit_sof(cinfo, M_SOF9); /* SOF code for sequential arithmetic */ - } else { - if (cinfo->progressive_mode) - emit_sof(cinfo, M_SOF2); /* SOF code for progressive Huffman */ - else if (is_baseline) - emit_sof(cinfo, M_SOF0); /* SOF code for baseline implementation */ - else - emit_sof(cinfo, M_SOF1); /* SOF code for non-baseline Huffman file */ - } - - /* Check to emit pseudo SOS marker */ - if (cinfo->progressive_mode && cinfo->block_size != DCTSIZE) - emit_pseudo_sos(cinfo); -} - - -/* - * Write scan header. - * This consists of DHT or DAC markers, optional DRI, and SOS. - * Compressed data will be written following the SOS. - */ - -METHODDEF(void) -write_scan_header (j_compress_ptr cinfo) -{ - my_marker_ptr marker = (my_marker_ptr) cinfo->marker; - int i; - jpeg_component_info *compptr; - - if (cinfo->arith_code) { - /* Emit arith conditioning info. We may have some duplication - * if the file has multiple scans, but it's so small it's hardly - * worth worrying about. - */ - emit_dac(cinfo); - } else { - /* Emit Huffman tables. - * Note that emit_dht() suppresses any duplicate tables. - */ - for (i = 0; i < cinfo->comps_in_scan; i++) { - compptr = cinfo->cur_comp_info[i]; - /* DC needs no table for refinement scan */ - if (cinfo->Ss == 0 && cinfo->Ah == 0) - emit_dht(cinfo, compptr->dc_tbl_no, FALSE); - /* AC needs no table when not present */ - if (cinfo->Se) - emit_dht(cinfo, compptr->ac_tbl_no, TRUE); - } - } - - /* Emit DRI if required --- note that DRI value could change for each scan. - * We avoid wasting space with unnecessary DRIs, however. - */ - if (cinfo->restart_interval != marker->last_restart_interval) { - emit_dri(cinfo); - marker->last_restart_interval = cinfo->restart_interval; - } - - emit_sos(cinfo); -} - - -/* - * Write datastream trailer. - */ - -METHODDEF(void) -write_file_trailer (j_compress_ptr cinfo) -{ - emit_marker(cinfo, M_EOI); -} - - -/* - * Write an abbreviated table-specification datastream. - * This consists of SOI, DQT and DHT tables, and EOI. - * Any table that is defined and not marked sent_table = TRUE will be - * emitted. Note that all tables will be marked sent_table = TRUE at exit. - */ - -METHODDEF(void) -write_tables_only (j_compress_ptr cinfo) -{ - int i; - - emit_marker(cinfo, M_SOI); - - for (i = 0; i < NUM_QUANT_TBLS; i++) { - if (cinfo->quant_tbl_ptrs[i] != NULL) - (void) emit_dqt(cinfo, i); - } - - if (! cinfo->arith_code) { - for (i = 0; i < NUM_HUFF_TBLS; i++) { - if (cinfo->dc_huff_tbl_ptrs[i] != NULL) - emit_dht(cinfo, i, FALSE); - if (cinfo->ac_huff_tbl_ptrs[i] != NULL) - emit_dht(cinfo, i, TRUE); - } - } - - emit_marker(cinfo, M_EOI); -} - - -/* - * Initialize the marker writer module. - */ - -GLOBAL(void) -jinit_marker_writer (j_compress_ptr cinfo) -{ - my_marker_ptr marker; - - /* Create the subobject */ - marker = (my_marker_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(my_marker_writer)); - cinfo->marker = (struct jpeg_marker_writer *) marker; - /* Initialize method pointers */ - marker->pub.write_file_header = write_file_header; - marker->pub.write_frame_header = write_frame_header; - marker->pub.write_scan_header = write_scan_header; - marker->pub.write_file_trailer = write_file_trailer; - marker->pub.write_tables_only = write_tables_only; - marker->pub.write_marker_header = write_marker_header; - marker->pub.write_marker_byte = write_marker_byte; - /* Initialize private state */ - marker->last_restart_interval = 0; -} diff --git a/jpeg/jcmaster.c b/jpeg/jcmaster.c deleted file mode 100755 index caf80a5..0000000 --- a/jpeg/jcmaster.c +++ /dev/null @@ -1,858 +0,0 @@ -/* - * jcmaster.c - * - * Copyright (C) 1991-1997, Thomas G. Lane. - * Modified 2003-2011 by Guido Vollbeding. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains master control logic for the JPEG compressor. - * These routines are concerned with parameter validation, initial setup, - * and inter-pass control (determining the number of passes and the work - * to be done in each pass). - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* Private state */ - -typedef enum { - main_pass, /* input data, also do first output step */ - huff_opt_pass, /* Huffman code optimization pass */ - output_pass /* data output pass */ -} c_pass_type; - -typedef struct { - struct jpeg_comp_master pub; /* public fields */ - - c_pass_type pass_type; /* the type of the current pass */ - - int pass_number; /* # of passes completed */ - int total_passes; /* total # of passes needed */ - - int scan_number; /* current index in scan_info[] */ -} my_comp_master; - -typedef my_comp_master * my_master_ptr; - - -/* - * Support routines that do various essential calculations. - */ - -/* - * Compute JPEG image dimensions and related values. - * NOTE: this is exported for possible use by application. - * Hence it mustn't do anything that can't be done twice. - */ - -GLOBAL(void) -jpeg_calc_jpeg_dimensions (j_compress_ptr cinfo) -/* Do computations that are needed before master selection phase */ -{ -#ifdef DCT_SCALING_SUPPORTED - - /* Sanity check on input image dimensions to prevent overflow in - * following calculation. - * We do check jpeg_width and jpeg_height in initial_setup below, - * but image_width and image_height can come from arbitrary data, - * and we need some space for multiplication by block_size. - */ - if (((long) cinfo->image_width >> 24) || ((long) cinfo->image_height >> 24)) - ERREXIT1(cinfo, JERR_IMAGE_TOO_BIG, (unsigned int) JPEG_MAX_DIMENSION); - - /* Compute actual JPEG image dimensions and DCT scaling choices. */ - if (cinfo->scale_num >= cinfo->scale_denom * cinfo->block_size) { - /* Provide block_size/1 scaling */ - cinfo->jpeg_width = cinfo->image_width * cinfo->block_size; - cinfo->jpeg_height = cinfo->image_height * cinfo->block_size; - cinfo->min_DCT_h_scaled_size = 1; - cinfo->min_DCT_v_scaled_size = 1; - } else if (cinfo->scale_num * 2 >= cinfo->scale_denom * cinfo->block_size) { - /* Provide block_size/2 scaling */ - cinfo->jpeg_width = (JDIMENSION) - jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 2L); - cinfo->jpeg_height = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 2L); - cinfo->min_DCT_h_scaled_size = 2; - cinfo->min_DCT_v_scaled_size = 2; - } else if (cinfo->scale_num * 3 >= cinfo->scale_denom * cinfo->block_size) { - /* Provide block_size/3 scaling */ - cinfo->jpeg_width = (JDIMENSION) - jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 3L); - cinfo->jpeg_height = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 3L); - cinfo->min_DCT_h_scaled_size = 3; - cinfo->min_DCT_v_scaled_size = 3; - } else if (cinfo->scale_num * 4 >= cinfo->scale_denom * cinfo->block_size) { - /* Provide block_size/4 scaling */ - cinfo->jpeg_width = (JDIMENSION) - jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 4L); - cinfo->jpeg_height = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 4L); - cinfo->min_DCT_h_scaled_size = 4; - cinfo->min_DCT_v_scaled_size = 4; - } else if (cinfo->scale_num * 5 >= cinfo->scale_denom * cinfo->block_size) { - /* Provide block_size/5 scaling */ - cinfo->jpeg_width = (JDIMENSION) - jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 5L); - cinfo->jpeg_height = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 5L); - cinfo->min_DCT_h_scaled_size = 5; - cinfo->min_DCT_v_scaled_size = 5; - } else if (cinfo->scale_num * 6 >= cinfo->scale_denom * cinfo->block_size) { - /* Provide block_size/6 scaling */ - cinfo->jpeg_width = (JDIMENSION) - jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 6L); - cinfo->jpeg_height = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 6L); - cinfo->min_DCT_h_scaled_size = 6; - cinfo->min_DCT_v_scaled_size = 6; - } else if (cinfo->scale_num * 7 >= cinfo->scale_denom * cinfo->block_size) { - /* Provide block_size/7 scaling */ - cinfo->jpeg_width = (JDIMENSION) - jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 7L); - cinfo->jpeg_height = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 7L); - cinfo->min_DCT_h_scaled_size = 7; - cinfo->min_DCT_v_scaled_size = 7; - } else if (cinfo->scale_num * 8 >= cinfo->scale_denom * cinfo->block_size) { - /* Provide block_size/8 scaling */ - cinfo->jpeg_width = (JDIMENSION) - jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 8L); - cinfo->jpeg_height = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 8L); - cinfo->min_DCT_h_scaled_size = 8; - cinfo->min_DCT_v_scaled_size = 8; - } else if (cinfo->scale_num * 9 >= cinfo->scale_denom * cinfo->block_size) { - /* Provide block_size/9 scaling */ - cinfo->jpeg_width = (JDIMENSION) - jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 9L); - cinfo->jpeg_height = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 9L); - cinfo->min_DCT_h_scaled_size = 9; - cinfo->min_DCT_v_scaled_size = 9; - } else if (cinfo->scale_num * 10 >= cinfo->scale_denom * cinfo->block_size) { - /* Provide block_size/10 scaling */ - cinfo->jpeg_width = (JDIMENSION) - jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 10L); - cinfo->jpeg_height = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 10L); - cinfo->min_DCT_h_scaled_size = 10; - cinfo->min_DCT_v_scaled_size = 10; - } else if (cinfo->scale_num * 11 >= cinfo->scale_denom * cinfo->block_size) { - /* Provide block_size/11 scaling */ - cinfo->jpeg_width = (JDIMENSION) - jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 11L); - cinfo->jpeg_height = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 11L); - cinfo->min_DCT_h_scaled_size = 11; - cinfo->min_DCT_v_scaled_size = 11; - } else if (cinfo->scale_num * 12 >= cinfo->scale_denom * cinfo->block_size) { - /* Provide block_size/12 scaling */ - cinfo->jpeg_width = (JDIMENSION) - jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 12L); - cinfo->jpeg_height = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 12L); - cinfo->min_DCT_h_scaled_size = 12; - cinfo->min_DCT_v_scaled_size = 12; - } else if (cinfo->scale_num * 13 >= cinfo->scale_denom * cinfo->block_size) { - /* Provide block_size/13 scaling */ - cinfo->jpeg_width = (JDIMENSION) - jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 13L); - cinfo->jpeg_height = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 13L); - cinfo->min_DCT_h_scaled_size = 13; - cinfo->min_DCT_v_scaled_size = 13; - } else if (cinfo->scale_num * 14 >= cinfo->scale_denom * cinfo->block_size) { - /* Provide block_size/14 scaling */ - cinfo->jpeg_width = (JDIMENSION) - jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 14L); - cinfo->jpeg_height = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 14L); - cinfo->min_DCT_h_scaled_size = 14; - cinfo->min_DCT_v_scaled_size = 14; - } else if (cinfo->scale_num * 15 >= cinfo->scale_denom * cinfo->block_size) { - /* Provide block_size/15 scaling */ - cinfo->jpeg_width = (JDIMENSION) - jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 15L); - cinfo->jpeg_height = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 15L); - cinfo->min_DCT_h_scaled_size = 15; - cinfo->min_DCT_v_scaled_size = 15; - } else { - /* Provide block_size/16 scaling */ - cinfo->jpeg_width = (JDIMENSION) - jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 16L); - cinfo->jpeg_height = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 16L); - cinfo->min_DCT_h_scaled_size = 16; - cinfo->min_DCT_v_scaled_size = 16; - } - -#else /* !DCT_SCALING_SUPPORTED */ - - /* Hardwire it to "no scaling" */ - cinfo->jpeg_width = cinfo->image_width; - cinfo->jpeg_height = cinfo->image_height; - cinfo->min_DCT_h_scaled_size = DCTSIZE; - cinfo->min_DCT_v_scaled_size = DCTSIZE; - -#endif /* DCT_SCALING_SUPPORTED */ -} - - -LOCAL(void) -jpeg_calc_trans_dimensions (j_compress_ptr cinfo) -{ - if (cinfo->min_DCT_h_scaled_size != cinfo->min_DCT_v_scaled_size) - ERREXIT2(cinfo, JERR_BAD_DCTSIZE, - cinfo->min_DCT_h_scaled_size, cinfo->min_DCT_v_scaled_size); - - cinfo->block_size = cinfo->min_DCT_h_scaled_size; -} - - -LOCAL(void) -initial_setup (j_compress_ptr cinfo, boolean transcode_only) -/* Do computations that are needed before master selection phase */ -{ - int ci, ssize; - jpeg_component_info *compptr; - long samplesperrow; - JDIMENSION jd_samplesperrow; - - if (transcode_only) - jpeg_calc_trans_dimensions(cinfo); - else - jpeg_calc_jpeg_dimensions(cinfo); - - /* Sanity check on block_size */ - if (cinfo->block_size < 1 || cinfo->block_size > 16) - ERREXIT2(cinfo, JERR_BAD_DCTSIZE, cinfo->block_size, cinfo->block_size); - - /* Derive natural_order from block_size */ - switch (cinfo->block_size) { - case 2: cinfo->natural_order = jpeg_natural_order2; break; - case 3: cinfo->natural_order = jpeg_natural_order3; break; - case 4: cinfo->natural_order = jpeg_natural_order4; break; - case 5: cinfo->natural_order = jpeg_natural_order5; break; - case 6: cinfo->natural_order = jpeg_natural_order6; break; - case 7: cinfo->natural_order = jpeg_natural_order7; break; - default: cinfo->natural_order = jpeg_natural_order; break; - } - - /* Derive lim_Se from block_size */ - cinfo->lim_Se = cinfo->block_size < DCTSIZE ? - cinfo->block_size * cinfo->block_size - 1 : DCTSIZE2-1; - - /* Sanity check on image dimensions */ - if (cinfo->jpeg_height <= 0 || cinfo->jpeg_width <= 0 || - cinfo->num_components <= 0 || cinfo->input_components <= 0) - ERREXIT(cinfo, JERR_EMPTY_IMAGE); - - /* Make sure image isn't bigger than I can handle */ - if ((long) cinfo->jpeg_height > (long) JPEG_MAX_DIMENSION || - (long) cinfo->jpeg_width > (long) JPEG_MAX_DIMENSION) - ERREXIT1(cinfo, JERR_IMAGE_TOO_BIG, (unsigned int) JPEG_MAX_DIMENSION); - - /* Width of an input scanline must be representable as JDIMENSION. */ - samplesperrow = (long) cinfo->image_width * (long) cinfo->input_components; - jd_samplesperrow = (JDIMENSION) samplesperrow; - if ((long) jd_samplesperrow != samplesperrow) - ERREXIT(cinfo, JERR_WIDTH_OVERFLOW); - - /* For now, precision must match compiled-in value... */ - if (cinfo->data_precision != BITS_IN_JSAMPLE) - ERREXIT1(cinfo, JERR_BAD_PRECISION, cinfo->data_precision); - - /* Check that number of components won't exceed internal array sizes */ - if (cinfo->num_components > MAX_COMPONENTS) - ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->num_components, - MAX_COMPONENTS); - - /* Compute maximum sampling factors; check factor validity */ - cinfo->max_h_samp_factor = 1; - cinfo->max_v_samp_factor = 1; - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - if (compptr->h_samp_factor<=0 || compptr->h_samp_factor>MAX_SAMP_FACTOR || - compptr->v_samp_factor<=0 || compptr->v_samp_factor>MAX_SAMP_FACTOR) - ERREXIT(cinfo, JERR_BAD_SAMPLING); - cinfo->max_h_samp_factor = MAX(cinfo->max_h_samp_factor, - compptr->h_samp_factor); - cinfo->max_v_samp_factor = MAX(cinfo->max_v_samp_factor, - compptr->v_samp_factor); - } - - /* Compute dimensions of components */ - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - /* Fill in the correct component_index value; don't rely on application */ - compptr->component_index = ci; - /* In selecting the actual DCT scaling for each component, we try to - * scale down the chroma components via DCT scaling rather than downsampling. - * This saves time if the downsampler gets to use 1:1 scaling. - * Note this code adapts subsampling ratios which are powers of 2. - */ - ssize = 1; -#ifdef DCT_SCALING_SUPPORTED - while (cinfo->min_DCT_h_scaled_size * ssize <= - (cinfo->do_fancy_downsampling ? DCTSIZE : DCTSIZE / 2) && - (cinfo->max_h_samp_factor % (compptr->h_samp_factor * ssize * 2)) == 0) { - ssize = ssize * 2; - } -#endif - compptr->DCT_h_scaled_size = cinfo->min_DCT_h_scaled_size * ssize; - ssize = 1; -#ifdef DCT_SCALING_SUPPORTED - while (cinfo->min_DCT_v_scaled_size * ssize <= - (cinfo->do_fancy_downsampling ? DCTSIZE : DCTSIZE / 2) && - (cinfo->max_v_samp_factor % (compptr->v_samp_factor * ssize * 2)) == 0) { - ssize = ssize * 2; - } -#endif - compptr->DCT_v_scaled_size = cinfo->min_DCT_v_scaled_size * ssize; - - /* We don't support DCT ratios larger than 2. */ - if (compptr->DCT_h_scaled_size > compptr->DCT_v_scaled_size * 2) - compptr->DCT_h_scaled_size = compptr->DCT_v_scaled_size * 2; - else if (compptr->DCT_v_scaled_size > compptr->DCT_h_scaled_size * 2) - compptr->DCT_v_scaled_size = compptr->DCT_h_scaled_size * 2; - - /* Size in DCT blocks */ - compptr->width_in_blocks = (JDIMENSION) - jdiv_round_up((long) cinfo->jpeg_width * (long) compptr->h_samp_factor, - (long) (cinfo->max_h_samp_factor * cinfo->block_size)); - compptr->height_in_blocks = (JDIMENSION) - jdiv_round_up((long) cinfo->jpeg_height * (long) compptr->v_samp_factor, - (long) (cinfo->max_v_samp_factor * cinfo->block_size)); - /* Size in samples */ - compptr->downsampled_width = (JDIMENSION) - jdiv_round_up((long) cinfo->jpeg_width * - (long) (compptr->h_samp_factor * compptr->DCT_h_scaled_size), - (long) (cinfo->max_h_samp_factor * cinfo->block_size)); - compptr->downsampled_height = (JDIMENSION) - jdiv_round_up((long) cinfo->jpeg_height * - (long) (compptr->v_samp_factor * compptr->DCT_v_scaled_size), - (long) (cinfo->max_v_samp_factor * cinfo->block_size)); - /* Mark component needed (this flag isn't actually used for compression) */ - compptr->component_needed = TRUE; - } - - /* Compute number of fully interleaved MCU rows (number of times that - * main controller will call coefficient controller). - */ - cinfo->total_iMCU_rows = (JDIMENSION) - jdiv_round_up((long) cinfo->jpeg_height, - (long) (cinfo->max_v_samp_factor * cinfo->block_size)); -} - - -#ifdef C_MULTISCAN_FILES_SUPPORTED - -LOCAL(void) -validate_script (j_compress_ptr cinfo) -/* Verify that the scan script in cinfo->scan_info[] is valid; also - * determine whether it uses progressive JPEG, and set cinfo->progressive_mode. - */ -{ - const jpeg_scan_info * scanptr; - int scanno, ncomps, ci, coefi, thisi; - int Ss, Se, Ah, Al; - boolean component_sent[MAX_COMPONENTS]; -#ifdef C_PROGRESSIVE_SUPPORTED - int * last_bitpos_ptr; - int last_bitpos[MAX_COMPONENTS][DCTSIZE2]; - /* -1 until that coefficient has been seen; then last Al for it */ -#endif - - if (cinfo->num_scans <= 0) - ERREXIT1(cinfo, JERR_BAD_SCAN_SCRIPT, 0); - - /* For sequential JPEG, all scans must have Ss=0, Se=DCTSIZE2-1; - * for progressive JPEG, no scan can have this. - */ - scanptr = cinfo->scan_info; - if (scanptr->Ss != 0 || scanptr->Se != DCTSIZE2-1) { -#ifdef C_PROGRESSIVE_SUPPORTED - cinfo->progressive_mode = TRUE; - last_bitpos_ptr = & last_bitpos[0][0]; - for (ci = 0; ci < cinfo->num_components; ci++) - for (coefi = 0; coefi < DCTSIZE2; coefi++) - *last_bitpos_ptr++ = -1; -#else - ERREXIT(cinfo, JERR_NOT_COMPILED); -#endif - } else { - cinfo->progressive_mode = FALSE; - for (ci = 0; ci < cinfo->num_components; ci++) - component_sent[ci] = FALSE; - } - - for (scanno = 1; scanno <= cinfo->num_scans; scanptr++, scanno++) { - /* Validate component indexes */ - ncomps = scanptr->comps_in_scan; - if (ncomps <= 0 || ncomps > MAX_COMPS_IN_SCAN) - ERREXIT2(cinfo, JERR_COMPONENT_COUNT, ncomps, MAX_COMPS_IN_SCAN); - for (ci = 0; ci < ncomps; ci++) { - thisi = scanptr->component_index[ci]; - if (thisi < 0 || thisi >= cinfo->num_components) - ERREXIT1(cinfo, JERR_BAD_SCAN_SCRIPT, scanno); - /* Components must appear in SOF order within each scan */ - if (ci > 0 && thisi <= scanptr->component_index[ci-1]) - ERREXIT1(cinfo, JERR_BAD_SCAN_SCRIPT, scanno); - } - /* Validate progression parameters */ - Ss = scanptr->Ss; - Se = scanptr->Se; - Ah = scanptr->Ah; - Al = scanptr->Al; - if (cinfo->progressive_mode) { -#ifdef C_PROGRESSIVE_SUPPORTED - /* The JPEG spec simply gives the ranges 0..13 for Ah and Al, but that - * seems wrong: the upper bound ought to depend on data precision. - * Perhaps they really meant 0..N+1 for N-bit precision. - * Here we allow 0..10 for 8-bit data; Al larger than 10 results in - * out-of-range reconstructed DC values during the first DC scan, - * which might cause problems for some decoders. - */ -#if BITS_IN_JSAMPLE == 8 -#define MAX_AH_AL 10 -#else -#define MAX_AH_AL 13 -#endif - if (Ss < 0 || Ss >= DCTSIZE2 || Se < Ss || Se >= DCTSIZE2 || - Ah < 0 || Ah > MAX_AH_AL || Al < 0 || Al > MAX_AH_AL) - ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno); - if (Ss == 0) { - if (Se != 0) /* DC and AC together not OK */ - ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno); - } else { - if (ncomps != 1) /* AC scans must be for only one component */ - ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno); - } - for (ci = 0; ci < ncomps; ci++) { - last_bitpos_ptr = & last_bitpos[scanptr->component_index[ci]][0]; - if (Ss != 0 && last_bitpos_ptr[0] < 0) /* AC without prior DC scan */ - ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno); - for (coefi = Ss; coefi <= Se; coefi++) { - if (last_bitpos_ptr[coefi] < 0) { - /* first scan of this coefficient */ - if (Ah != 0) - ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno); - } else { - /* not first scan */ - if (Ah != last_bitpos_ptr[coefi] || Al != Ah-1) - ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno); - } - last_bitpos_ptr[coefi] = Al; - } - } -#endif - } else { - /* For sequential JPEG, all progression parameters must be these: */ - if (Ss != 0 || Se != DCTSIZE2-1 || Ah != 0 || Al != 0) - ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno); - /* Make sure components are not sent twice */ - for (ci = 0; ci < ncomps; ci++) { - thisi = scanptr->component_index[ci]; - if (component_sent[thisi]) - ERREXIT1(cinfo, JERR_BAD_SCAN_SCRIPT, scanno); - component_sent[thisi] = TRUE; - } - } - } - - /* Now verify that everything got sent. */ - if (cinfo->progressive_mode) { -#ifdef C_PROGRESSIVE_SUPPORTED - /* For progressive mode, we only check that at least some DC data - * got sent for each component; the spec does not require that all bits - * of all coefficients be transmitted. Would it be wiser to enforce - * transmission of all coefficient bits?? - */ - for (ci = 0; ci < cinfo->num_components; ci++) { - if (last_bitpos[ci][0] < 0) - ERREXIT(cinfo, JERR_MISSING_DATA); - } -#endif - } else { - for (ci = 0; ci < cinfo->num_components; ci++) { - if (! component_sent[ci]) - ERREXIT(cinfo, JERR_MISSING_DATA); - } - } -} - - -LOCAL(void) -reduce_script (j_compress_ptr cinfo) -/* Adapt scan script for use with reduced block size; - * assume that script has been validated before. - */ -{ - jpeg_scan_info * scanptr; - int idxout, idxin; - - /* Circumvent const declaration for this function */ - scanptr = (jpeg_scan_info *) cinfo->scan_info; - idxout = 0; - - for (idxin = 0; idxin < cinfo->num_scans; idxin++) { - /* After skipping, idxout becomes smaller than idxin */ - if (idxin != idxout) - /* Copy rest of data; - * note we stay in given chunk of allocated memory. - */ - scanptr[idxout] = scanptr[idxin]; - if (scanptr[idxout].Ss > cinfo->lim_Se) - /* Entire scan out of range - skip this entry */ - continue; - if (scanptr[idxout].Se > cinfo->lim_Se) - /* Limit scan to end of block */ - scanptr[idxout].Se = cinfo->lim_Se; - idxout++; - } - - cinfo->num_scans = idxout; -} - -#endif /* C_MULTISCAN_FILES_SUPPORTED */ - - -LOCAL(void) -select_scan_parameters (j_compress_ptr cinfo) -/* Set up the scan parameters for the current scan */ -{ - int ci; - -#ifdef C_MULTISCAN_FILES_SUPPORTED - if (cinfo->scan_info != NULL) { - /* Prepare for current scan --- the script is already validated */ - my_master_ptr master = (my_master_ptr) cinfo->master; - const jpeg_scan_info * scanptr = cinfo->scan_info + master->scan_number; - - cinfo->comps_in_scan = scanptr->comps_in_scan; - for (ci = 0; ci < scanptr->comps_in_scan; ci++) { - cinfo->cur_comp_info[ci] = - &cinfo->comp_info[scanptr->component_index[ci]]; - } - if (cinfo->progressive_mode) { - cinfo->Ss = scanptr->Ss; - cinfo->Se = scanptr->Se; - cinfo->Ah = scanptr->Ah; - cinfo->Al = scanptr->Al; - return; - } - } - else -#endif - { - /* Prepare for single sequential-JPEG scan containing all components */ - if (cinfo->num_components > MAX_COMPS_IN_SCAN) - ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->num_components, - MAX_COMPS_IN_SCAN); - cinfo->comps_in_scan = cinfo->num_components; - for (ci = 0; ci < cinfo->num_components; ci++) { - cinfo->cur_comp_info[ci] = &cinfo->comp_info[ci]; - } - } - cinfo->Ss = 0; - cinfo->Se = cinfo->block_size * cinfo->block_size - 1; - cinfo->Ah = 0; - cinfo->Al = 0; -} - - -LOCAL(void) -per_scan_setup (j_compress_ptr cinfo) -/* Do computations that are needed before processing a JPEG scan */ -/* cinfo->comps_in_scan and cinfo->cur_comp_info[] are already set */ -{ - int ci, mcublks, tmp; - jpeg_component_info *compptr; - - if (cinfo->comps_in_scan == 1) { - - /* Noninterleaved (single-component) scan */ - compptr = cinfo->cur_comp_info[0]; - - /* Overall image size in MCUs */ - cinfo->MCUs_per_row = compptr->width_in_blocks; - cinfo->MCU_rows_in_scan = compptr->height_in_blocks; - - /* For noninterleaved scan, always one block per MCU */ - compptr->MCU_width = 1; - compptr->MCU_height = 1; - compptr->MCU_blocks = 1; - compptr->MCU_sample_width = compptr->DCT_h_scaled_size; - compptr->last_col_width = 1; - /* For noninterleaved scans, it is convenient to define last_row_height - * as the number of block rows present in the last iMCU row. - */ - tmp = (int) (compptr->height_in_blocks % compptr->v_samp_factor); - if (tmp == 0) tmp = compptr->v_samp_factor; - compptr->last_row_height = tmp; - - /* Prepare array describing MCU composition */ - cinfo->blocks_in_MCU = 1; - cinfo->MCU_membership[0] = 0; - - } else { - - /* Interleaved (multi-component) scan */ - if (cinfo->comps_in_scan <= 0 || cinfo->comps_in_scan > MAX_COMPS_IN_SCAN) - ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->comps_in_scan, - MAX_COMPS_IN_SCAN); - - /* Overall image size in MCUs */ - cinfo->MCUs_per_row = (JDIMENSION) - jdiv_round_up((long) cinfo->jpeg_width, - (long) (cinfo->max_h_samp_factor * cinfo->block_size)); - cinfo->MCU_rows_in_scan = (JDIMENSION) - jdiv_round_up((long) cinfo->jpeg_height, - (long) (cinfo->max_v_samp_factor * cinfo->block_size)); - - cinfo->blocks_in_MCU = 0; - - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - compptr = cinfo->cur_comp_info[ci]; - /* Sampling factors give # of blocks of component in each MCU */ - compptr->MCU_width = compptr->h_samp_factor; - compptr->MCU_height = compptr->v_samp_factor; - compptr->MCU_blocks = compptr->MCU_width * compptr->MCU_height; - compptr->MCU_sample_width = compptr->MCU_width * compptr->DCT_h_scaled_size; - /* Figure number of non-dummy blocks in last MCU column & row */ - tmp = (int) (compptr->width_in_blocks % compptr->MCU_width); - if (tmp == 0) tmp = compptr->MCU_width; - compptr->last_col_width = tmp; - tmp = (int) (compptr->height_in_blocks % compptr->MCU_height); - if (tmp == 0) tmp = compptr->MCU_height; - compptr->last_row_height = tmp; - /* Prepare array describing MCU composition */ - mcublks = compptr->MCU_blocks; - if (cinfo->blocks_in_MCU + mcublks > C_MAX_BLOCKS_IN_MCU) - ERREXIT(cinfo, JERR_BAD_MCU_SIZE); - while (mcublks-- > 0) { - cinfo->MCU_membership[cinfo->blocks_in_MCU++] = ci; - } - } - - } - - /* Convert restart specified in rows to actual MCU count. */ - /* Note that count must fit in 16 bits, so we provide limiting. */ - if (cinfo->restart_in_rows > 0) { - long nominal = (long) cinfo->restart_in_rows * (long) cinfo->MCUs_per_row; - cinfo->restart_interval = (unsigned int) MIN(nominal, 65535L); - } -} - - -/* - * Per-pass setup. - * This is called at the beginning of each pass. We determine which modules - * will be active during this pass and give them appropriate start_pass calls. - * We also set is_last_pass to indicate whether any more passes will be - * required. - */ - -METHODDEF(void) -prepare_for_pass (j_compress_ptr cinfo) -{ - my_master_ptr master = (my_master_ptr) cinfo->master; - - switch (master->pass_type) { - case main_pass: - /* Initial pass: will collect input data, and do either Huffman - * optimization or data output for the first scan. - */ - select_scan_parameters(cinfo); - per_scan_setup(cinfo); - if (! cinfo->raw_data_in) { - (*cinfo->cconvert->start_pass) (cinfo); - (*cinfo->downsample->start_pass) (cinfo); - (*cinfo->prep->start_pass) (cinfo, JBUF_PASS_THRU); - } - (*cinfo->fdct->start_pass) (cinfo); - (*cinfo->entropy->start_pass) (cinfo, cinfo->optimize_coding); - (*cinfo->coef->start_pass) (cinfo, - (master->total_passes > 1 ? - JBUF_SAVE_AND_PASS : JBUF_PASS_THRU)); - (*cinfo->main->start_pass) (cinfo, JBUF_PASS_THRU); - if (cinfo->optimize_coding) { - /* No immediate data output; postpone writing frame/scan headers */ - master->pub.call_pass_startup = FALSE; - } else { - /* Will write frame/scan headers at first jpeg_write_scanlines call */ - master->pub.call_pass_startup = TRUE; - } - break; -#ifdef ENTROPY_OPT_SUPPORTED - case huff_opt_pass: - /* Do Huffman optimization for a scan after the first one. */ - select_scan_parameters(cinfo); - per_scan_setup(cinfo); - if (cinfo->Ss != 0 || cinfo->Ah == 0) { - (*cinfo->entropy->start_pass) (cinfo, TRUE); - (*cinfo->coef->start_pass) (cinfo, JBUF_CRANK_DEST); - master->pub.call_pass_startup = FALSE; - break; - } - /* Special case: Huffman DC refinement scans need no Huffman table - * and therefore we can skip the optimization pass for them. - */ - master->pass_type = output_pass; - master->pass_number++; - /*FALLTHROUGH*/ -#endif - case output_pass: - /* Do a data-output pass. */ - /* We need not repeat per-scan setup if prior optimization pass did it. */ - if (! cinfo->optimize_coding) { - select_scan_parameters(cinfo); - per_scan_setup(cinfo); - } - (*cinfo->entropy->start_pass) (cinfo, FALSE); - (*cinfo->coef->start_pass) (cinfo, JBUF_CRANK_DEST); - /* We emit frame/scan headers now */ - if (master->scan_number == 0) - (*cinfo->marker->write_frame_header) (cinfo); - (*cinfo->marker->write_scan_header) (cinfo); - master->pub.call_pass_startup = FALSE; - break; - default: - ERREXIT(cinfo, JERR_NOT_COMPILED); - } - - master->pub.is_last_pass = (master->pass_number == master->total_passes-1); - - /* Set up progress monitor's pass info if present */ - if (cinfo->progress != NULL) { - cinfo->progress->completed_passes = master->pass_number; - cinfo->progress->total_passes = master->total_passes; - } -} - - -/* - * Special start-of-pass hook. - * This is called by jpeg_write_scanlines if call_pass_startup is TRUE. - * In single-pass processing, we need this hook because we don't want to - * write frame/scan headers during jpeg_start_compress; we want to let the - * application write COM markers etc. between jpeg_start_compress and the - * jpeg_write_scanlines loop. - * In multi-pass processing, this routine is not used. - */ - -METHODDEF(void) -pass_startup (j_compress_ptr cinfo) -{ - cinfo->master->call_pass_startup = FALSE; /* reset flag so call only once */ - - (*cinfo->marker->write_frame_header) (cinfo); - (*cinfo->marker->write_scan_header) (cinfo); -} - - -/* - * Finish up at end of pass. - */ - -METHODDEF(void) -finish_pass_master (j_compress_ptr cinfo) -{ - my_master_ptr master = (my_master_ptr) cinfo->master; - - /* The entropy coder always needs an end-of-pass call, - * either to analyze statistics or to flush its output buffer. - */ - (*cinfo->entropy->finish_pass) (cinfo); - - /* Update state for next pass */ - switch (master->pass_type) { - case main_pass: - /* next pass is either output of scan 0 (after optimization) - * or output of scan 1 (if no optimization). - */ - master->pass_type = output_pass; - if (! cinfo->optimize_coding) - master->scan_number++; - break; - case huff_opt_pass: - /* next pass is always output of current scan */ - master->pass_type = output_pass; - break; - case output_pass: - /* next pass is either optimization or output of next scan */ - if (cinfo->optimize_coding) - master->pass_type = huff_opt_pass; - master->scan_number++; - break; - } - - master->pass_number++; -} - - -/* - * Initialize master compression control. - */ - -GLOBAL(void) -jinit_c_master_control (j_compress_ptr cinfo, boolean transcode_only) -{ - my_master_ptr master; - - master = (my_master_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(my_comp_master)); - cinfo->master = (struct jpeg_comp_master *) master; - master->pub.prepare_for_pass = prepare_for_pass; - master->pub.pass_startup = pass_startup; - master->pub.finish_pass = finish_pass_master; - master->pub.is_last_pass = FALSE; - - /* Validate parameters, determine derived values */ - initial_setup(cinfo, transcode_only); - - if (cinfo->scan_info != NULL) { -#ifdef C_MULTISCAN_FILES_SUPPORTED - validate_script(cinfo); - if (cinfo->block_size < DCTSIZE) - reduce_script(cinfo); -#else - ERREXIT(cinfo, JERR_NOT_COMPILED); -#endif - } else { - cinfo->progressive_mode = FALSE; - cinfo->num_scans = 1; - } - - if ((cinfo->progressive_mode || cinfo->block_size < DCTSIZE) && - !cinfo->arith_code) /* TEMPORARY HACK ??? */ - /* assume default tables no good for progressive or downscale mode */ - cinfo->optimize_coding = TRUE; - - /* Initialize my private state */ - if (transcode_only) { - /* no main pass in transcoding */ - if (cinfo->optimize_coding) - master->pass_type = huff_opt_pass; - else - master->pass_type = output_pass; - } else { - /* for normal compression, first pass is always this type: */ - master->pass_type = main_pass; - } - master->scan_number = 0; - master->pass_number = 0; - if (cinfo->optimize_coding) - master->total_passes = cinfo->num_scans * 2; - else - master->total_passes = cinfo->num_scans; -} diff --git a/jpeg/jcomapi.c b/jpeg/jcomapi.c deleted file mode 100755 index 9b1fa75..0000000 --- a/jpeg/jcomapi.c +++ /dev/null @@ -1,106 +0,0 @@ -/* - * jcomapi.c - * - * Copyright (C) 1994-1997, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains application interface routines that are used for both - * compression and decompression. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* - * Abort processing of a JPEG compression or decompression operation, - * but don't destroy the object itself. - * - * For this, we merely clean up all the nonpermanent memory pools. - * Note that temp files (virtual arrays) are not allowed to belong to - * the permanent pool, so we will be able to close all temp files here. - * Closing a data source or destination, if necessary, is the application's - * responsibility. - */ - -GLOBAL(void) -jpeg_abort (j_common_ptr cinfo) -{ - int pool; - - /* Do nothing if called on a not-initialized or destroyed JPEG object. */ - if (cinfo->mem == NULL) - return; - - /* Releasing pools in reverse order might help avoid fragmentation - * with some (brain-damaged) malloc libraries. - */ - for (pool = JPOOL_NUMPOOLS-1; pool > JPOOL_PERMANENT; pool--) { - (*cinfo->mem->free_pool) (cinfo, pool); - } - - /* Reset overall state for possible reuse of object */ - if (cinfo->is_decompressor) { - cinfo->global_state = DSTATE_START; - /* Try to keep application from accessing now-deleted marker list. - * A bit kludgy to do it here, but this is the most central place. - */ - ((j_decompress_ptr) cinfo)->marker_list = NULL; - } else { - cinfo->global_state = CSTATE_START; - } -} - - -/* - * Destruction of a JPEG object. - * - * Everything gets deallocated except the master jpeg_compress_struct itself - * and the error manager struct. Both of these are supplied by the application - * and must be freed, if necessary, by the application. (Often they are on - * the stack and so don't need to be freed anyway.) - * Closing a data source or destination, if necessary, is the application's - * responsibility. - */ - -GLOBAL(void) -jpeg_destroy (j_common_ptr cinfo) -{ - /* We need only tell the memory manager to release everything. */ - /* NB: mem pointer is NULL if memory mgr failed to initialize. */ - if (cinfo->mem != NULL) - (*cinfo->mem->self_destruct) (cinfo); - cinfo->mem = NULL; /* be safe if jpeg_destroy is called twice */ - cinfo->global_state = 0; /* mark it destroyed */ -} - - -/* - * Convenience routines for allocating quantization and Huffman tables. - * (Would jutils.c be a more reasonable place to put these?) - */ - -GLOBAL(JQUANT_TBL *) -jpeg_alloc_quant_table (j_common_ptr cinfo) -{ - JQUANT_TBL *tbl; - - tbl = (JQUANT_TBL *) - (*cinfo->mem->alloc_small) (cinfo, JPOOL_PERMANENT, SIZEOF(JQUANT_TBL)); - tbl->sent_table = FALSE; /* make sure this is false in any new table */ - return tbl; -} - - -GLOBAL(JHUFF_TBL *) -jpeg_alloc_huff_table (j_common_ptr cinfo) -{ - JHUFF_TBL *tbl; - - tbl = (JHUFF_TBL *) - (*cinfo->mem->alloc_small) (cinfo, JPOOL_PERMANENT, SIZEOF(JHUFF_TBL)); - tbl->sent_table = FALSE; /* make sure this is false in any new table */ - return tbl; -} diff --git a/jpeg/jconfig.bcc b/jpeg/jconfig.bcc deleted file mode 100755 index e4da3d7..0000000 --- a/jpeg/jconfig.bcc +++ /dev/null @@ -1,48 +0,0 @@ -/* jconfig.bcc --- jconfig.h for Borland C (Turbo C) on MS-DOS or OS/2. */ -/* see jconfig.txt for explanations */ - -#define HAVE_PROTOTYPES -#define HAVE_UNSIGNED_CHAR -#define HAVE_UNSIGNED_SHORT -/* #define void char */ -/* #define const */ -#undef CHAR_IS_UNSIGNED -#define HAVE_STDDEF_H -#define HAVE_STDLIB_H -#undef NEED_BSD_STRINGS -#undef NEED_SYS_TYPES_H -#ifdef __MSDOS__ -#define NEED_FAR_POINTERS /* for small or medium memory model */ -#endif -#undef NEED_SHORT_EXTERNAL_NAMES -#undef INCOMPLETE_TYPES_BROKEN /* this assumes you have -w-stu in CFLAGS */ - -#ifdef JPEG_INTERNALS - -#undef RIGHT_SHIFT_IS_UNSIGNED - -#ifdef __MSDOS__ -#define USE_MSDOS_MEMMGR /* Define this if you use jmemdos.c */ -#define MAX_ALLOC_CHUNK 65520L /* Maximum request to malloc() */ -#define USE_FMEM /* Borland has _fmemcpy() and _fmemset() */ -#endif - -#endif /* JPEG_INTERNALS */ - -#ifdef JPEG_CJPEG_DJPEG - -#define BMP_SUPPORTED /* BMP image file format */ -#define GIF_SUPPORTED /* GIF image file format */ -#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ -#undef RLE_SUPPORTED /* Utah RLE image file format */ -#define TARGA_SUPPORTED /* Targa image file format */ - -#define TWO_FILE_COMMANDLINE -#define USE_SETMODE /* Borland has setmode() */ -#ifdef __MSDOS__ -#define NEED_SIGNAL_CATCHER /* Define this if you use jmemdos.c */ -#endif -#undef DONT_USE_B_MODE -#undef PROGRESS_REPORT /* optional */ - -#endif /* JPEG_CJPEG_DJPEG */ diff --git a/jpeg/jconfig.cfg b/jpeg/jconfig.cfg deleted file mode 100755 index 5269eb3..0000000 --- a/jpeg/jconfig.cfg +++ /dev/null @@ -1,53 +0,0 @@ -/* jconfig.cfg --- source file edited by configure script */ -/* see jconfig.txt for explanations */ - -#undef HAVE_PROTOTYPES -#undef HAVE_UNSIGNED_CHAR -#undef HAVE_UNSIGNED_SHORT -#undef void -#undef const -#undef CHAR_IS_UNSIGNED -#undef HAVE_STDDEF_H -#undef HAVE_STDLIB_H -#undef HAVE_LOCALE_H -#undef NEED_BSD_STRINGS -#undef NEED_SYS_TYPES_H -#undef NEED_FAR_POINTERS -#undef NEED_SHORT_EXTERNAL_NAMES -/* Define this if you get warnings about undefined structures. */ -#undef INCOMPLETE_TYPES_BROKEN - -/* Define "boolean" as unsigned char, not int, on Windows systems. */ -#ifdef _WIN32 -#ifndef __RPCNDR_H__ /* don't conflict if rpcndr.h already read */ -typedef unsigned char boolean; -#endif -#define HAVE_BOOLEAN /* prevent jmorecfg.h from redefining it */ -#endif - -#ifdef JPEG_INTERNALS - -#undef RIGHT_SHIFT_IS_UNSIGNED -#undef INLINE -/* These are for configuring the JPEG memory manager. */ -#undef DEFAULT_MAX_MEM -#undef NO_MKTEMP - -#endif /* JPEG_INTERNALS */ - -#ifdef JPEG_CJPEG_DJPEG - -#undef BMP_SUPPORTED /* BMP image file format */ -#undef GIF_SUPPORTED /* GIF image file format */ -#undef PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ -#undef RLE_SUPPORTED /* Utah RLE image file format */ -#undef TARGA_SUPPORTED /* Targa image file format */ - -#undef TWO_FILE_COMMANDLINE -#undef NEED_SIGNAL_CATCHER -#undef DONT_USE_B_MODE - -/* Define this if you want percent-done progress reports from cjpeg/djpeg. */ -#undef PROGRESS_REPORT - -#endif /* JPEG_CJPEG_DJPEG */ diff --git a/jpeg/jconfig.dj b/jpeg/jconfig.dj deleted file mode 100755 index a0d4092..0000000 --- a/jpeg/jconfig.dj +++ /dev/null @@ -1,38 +0,0 @@ -/* jconfig.dj --- jconfig.h for DJGPP (Delorie's GNU C port) on MS-DOS. */ -/* see jconfig.txt for explanations */ - -#define HAVE_PROTOTYPES -#define HAVE_UNSIGNED_CHAR -#define HAVE_UNSIGNED_SHORT -/* #define void char */ -/* #define const */ -#undef CHAR_IS_UNSIGNED -#define HAVE_STDDEF_H -#define HAVE_STDLIB_H -#undef NEED_BSD_STRINGS -#undef NEED_SYS_TYPES_H -#undef NEED_FAR_POINTERS /* DJGPP uses flat 32-bit addressing */ -#undef NEED_SHORT_EXTERNAL_NAMES -#undef INCOMPLETE_TYPES_BROKEN - -#ifdef JPEG_INTERNALS - -#undef RIGHT_SHIFT_IS_UNSIGNED - -#endif /* JPEG_INTERNALS */ - -#ifdef JPEG_CJPEG_DJPEG - -#define BMP_SUPPORTED /* BMP image file format */ -#define GIF_SUPPORTED /* GIF image file format */ -#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ -#undef RLE_SUPPORTED /* Utah RLE image file format */ -#define TARGA_SUPPORTED /* Targa image file format */ - -#undef TWO_FILE_COMMANDLINE /* optional */ -#define USE_SETMODE /* Needed to make one-file style work in DJGPP */ -#undef NEED_SIGNAL_CATCHER /* Define this if you use jmemname.c */ -#undef DONT_USE_B_MODE -#undef PROGRESS_REPORT /* optional */ - -#endif /* JPEG_CJPEG_DJPEG */ diff --git a/jpeg/jconfig.mac b/jpeg/jconfig.mac deleted file mode 100755 index 70ed66c..0000000 --- a/jpeg/jconfig.mac +++ /dev/null @@ -1,43 +0,0 @@ -/* jconfig.mac --- jconfig.h for CodeWarrior on Apple Macintosh */ -/* see jconfig.txt for explanations */ - -#define HAVE_PROTOTYPES -#define HAVE_UNSIGNED_CHAR -#define HAVE_UNSIGNED_SHORT -/* #define void char */ -/* #define const */ -#undef CHAR_IS_UNSIGNED -#define HAVE_STDDEF_H -#define HAVE_STDLIB_H -#undef NEED_BSD_STRINGS -#undef NEED_SYS_TYPES_H -#undef NEED_FAR_POINTERS -#undef NEED_SHORT_EXTERNAL_NAMES -#undef INCOMPLETE_TYPES_BROKEN - -#ifdef JPEG_INTERNALS - -#undef RIGHT_SHIFT_IS_UNSIGNED - -#define USE_MAC_MEMMGR /* Define this if you use jmemmac.c */ - -#define ALIGN_TYPE long /* Needed for 680x0 Macs */ - -#endif /* JPEG_INTERNALS */ - -#ifdef JPEG_CJPEG_DJPEG - -#define BMP_SUPPORTED /* BMP image file format */ -#define GIF_SUPPORTED /* GIF image file format */ -#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ -#undef RLE_SUPPORTED /* Utah RLE image file format */ -#define TARGA_SUPPORTED /* Targa image file format */ - -#define USE_CCOMMAND /* Command line reader for Macintosh */ -#define TWO_FILE_COMMANDLINE /* Binary I/O thru stdin/stdout doesn't work */ - -#undef NEED_SIGNAL_CATCHER -#undef DONT_USE_B_MODE -#undef PROGRESS_REPORT /* optional */ - -#endif /* JPEG_CJPEG_DJPEG */ diff --git a/jpeg/jconfig.manx b/jpeg/jconfig.manx deleted file mode 100755 index cd529d7..0000000 --- a/jpeg/jconfig.manx +++ /dev/null @@ -1,43 +0,0 @@ -/* jconfig.manx --- jconfig.h for Amiga systems using Manx Aztec C ver 5.x. */ -/* see jconfig.txt for explanations */ - -#define HAVE_PROTOTYPES -#define HAVE_UNSIGNED_CHAR -#define HAVE_UNSIGNED_SHORT -/* #define void char */ -/* #define const */ -#undef CHAR_IS_UNSIGNED -#define HAVE_STDDEF_H -#define HAVE_STDLIB_H -#undef NEED_BSD_STRINGS -#undef NEED_SYS_TYPES_H -#undef NEED_FAR_POINTERS -#undef NEED_SHORT_EXTERNAL_NAMES -#undef INCOMPLETE_TYPES_BROKEN - -#ifdef JPEG_INTERNALS - -#undef RIGHT_SHIFT_IS_UNSIGNED - -#define TEMP_DIRECTORY "JPEGTMP:" /* recommended setting for Amiga */ - -#define SHORTxSHORT_32 /* produces better DCT code with Aztec C */ - -#endif /* JPEG_INTERNALS */ - -#ifdef JPEG_CJPEG_DJPEG - -#define BMP_SUPPORTED /* BMP image file format */ -#define GIF_SUPPORTED /* GIF image file format */ -#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ -#undef RLE_SUPPORTED /* Utah RLE image file format */ -#define TARGA_SUPPORTED /* Targa image file format */ - -#define TWO_FILE_COMMANDLINE -#define NEED_SIGNAL_CATCHER -#undef DONT_USE_B_MODE -#undef PROGRESS_REPORT /* optional */ - -#define signal_catcher _abort /* hack for Aztec C naming requirements */ - -#endif /* JPEG_CJPEG_DJPEG */ diff --git a/jpeg/jconfig.mc6 b/jpeg/jconfig.mc6 deleted file mode 100755 index 6b05e81..0000000 --- a/jpeg/jconfig.mc6 +++ /dev/null @@ -1,52 +0,0 @@ -/* jconfig.mc6 --- jconfig.h for Microsoft C on MS-DOS, version 6.00A & up. */ -/* see jconfig.txt for explanations */ - -#define HAVE_PROTOTYPES -#define HAVE_UNSIGNED_CHAR -#define HAVE_UNSIGNED_SHORT -/* #define void char */ -/* #define const */ -#undef CHAR_IS_UNSIGNED -#define HAVE_STDDEF_H -#define HAVE_STDLIB_H -#undef NEED_BSD_STRINGS -#undef NEED_SYS_TYPES_H -#define NEED_FAR_POINTERS /* for small or medium memory model */ -#undef NEED_SHORT_EXTERNAL_NAMES -#undef INCOMPLETE_TYPES_BROKEN - -#ifdef JPEG_INTERNALS - -#undef RIGHT_SHIFT_IS_UNSIGNED - -#define USE_MSDOS_MEMMGR /* Define this if you use jmemdos.c */ - -#define MAX_ALLOC_CHUNK 65520L /* Maximum request to malloc() */ - -#define USE_FMEM /* Microsoft has _fmemcpy() and _fmemset() */ - -#define NEED_FHEAPMIN /* far heap management routines are broken */ - -#define SHORTxLCONST_32 /* enable compiler-specific DCT optimization */ -/* Note: the above define is known to improve the code with Microsoft C 6.00A. - * I do not know whether it is good for later compiler versions. - * Please report any info on this point to jpeg-info@jpegclub.org. - */ - -#endif /* JPEG_INTERNALS */ - -#ifdef JPEG_CJPEG_DJPEG - -#define BMP_SUPPORTED /* BMP image file format */ -#define GIF_SUPPORTED /* GIF image file format */ -#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ -#undef RLE_SUPPORTED /* Utah RLE image file format */ -#define TARGA_SUPPORTED /* Targa image file format */ - -#define TWO_FILE_COMMANDLINE -#define USE_SETMODE /* Microsoft has setmode() */ -#define NEED_SIGNAL_CATCHER /* Define this if you use jmemdos.c */ -#undef DONT_USE_B_MODE -#undef PROGRESS_REPORT /* optional */ - -#endif /* JPEG_CJPEG_DJPEG */ diff --git a/jpeg/jconfig.sas b/jpeg/jconfig.sas deleted file mode 100755 index b8a1819..0000000 --- a/jpeg/jconfig.sas +++ /dev/null @@ -1,43 +0,0 @@ -/* jconfig.sas --- jconfig.h for Amiga systems using SAS C 6.0 and up. */ -/* see jconfig.txt for explanations */ - -#define HAVE_PROTOTYPES -#define HAVE_UNSIGNED_CHAR -#define HAVE_UNSIGNED_SHORT -/* #define void char */ -/* #define const */ -#undef CHAR_IS_UNSIGNED -#define HAVE_STDDEF_H -#define HAVE_STDLIB_H -#undef NEED_BSD_STRINGS -#undef NEED_SYS_TYPES_H -#undef NEED_FAR_POINTERS -#undef NEED_SHORT_EXTERNAL_NAMES -#undef INCOMPLETE_TYPES_BROKEN - -#ifdef JPEG_INTERNALS - -#undef RIGHT_SHIFT_IS_UNSIGNED - -#define TEMP_DIRECTORY "JPEGTMP:" /* recommended setting for Amiga */ - -#define NO_MKTEMP /* SAS C doesn't have mktemp() */ - -#define SHORTxSHORT_32 /* produces better DCT code with SAS C */ - -#endif /* JPEG_INTERNALS */ - -#ifdef JPEG_CJPEG_DJPEG - -#define BMP_SUPPORTED /* BMP image file format */ -#define GIF_SUPPORTED /* GIF image file format */ -#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ -#undef RLE_SUPPORTED /* Utah RLE image file format */ -#define TARGA_SUPPORTED /* Targa image file format */ - -#define TWO_FILE_COMMANDLINE -#define NEED_SIGNAL_CATCHER -#undef DONT_USE_B_MODE -#undef PROGRESS_REPORT /* optional */ - -#endif /* JPEG_CJPEG_DJPEG */ diff --git a/jpeg/jconfig.st b/jpeg/jconfig.st deleted file mode 100755 index 5afa0b6..0000000 --- a/jpeg/jconfig.st +++ /dev/null @@ -1,42 +0,0 @@ -/* jconfig.st --- jconfig.h for Atari ST/STE/TT using Pure C or Turbo C. */ -/* see jconfig.txt for explanations */ - -#define HAVE_PROTOTYPES -#define HAVE_UNSIGNED_CHAR -#define HAVE_UNSIGNED_SHORT -/* #define void char */ -/* #define const */ -#undef CHAR_IS_UNSIGNED -#define HAVE_STDDEF_H -#define HAVE_STDLIB_H -#undef NEED_BSD_STRINGS -#undef NEED_SYS_TYPES_H -#undef NEED_FAR_POINTERS -#undef NEED_SHORT_EXTERNAL_NAMES -#define INCOMPLETE_TYPES_BROKEN /* suppress undefined-structure warnings */ - -#ifdef JPEG_INTERNALS - -#undef RIGHT_SHIFT_IS_UNSIGNED - -#define ALIGN_TYPE long /* apparently double is a weird size? */ - -#endif /* JPEG_INTERNALS */ - -#ifdef JPEG_CJPEG_DJPEG - -#define BMP_SUPPORTED /* BMP image file format */ -#define GIF_SUPPORTED /* GIF image file format */ -#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ -#undef RLE_SUPPORTED /* Utah RLE image file format */ -#define TARGA_SUPPORTED /* Targa image file format */ - -#define TWO_FILE_COMMANDLINE /* optional -- undef if you like Unix style */ -/* Note: if you undef TWO_FILE_COMMANDLINE, you may need to define - * USE_SETMODE. Some Atari compilers require it, some do not. - */ -#define NEED_SIGNAL_CATCHER /* needed if you use jmemname.c */ -#undef DONT_USE_B_MODE -#undef PROGRESS_REPORT /* optional */ - -#endif /* JPEG_CJPEG_DJPEG */ diff --git a/jpeg/jconfig.txt b/jpeg/jconfig.txt deleted file mode 100755 index b96d312..0000000 --- a/jpeg/jconfig.txt +++ /dev/null @@ -1,164 +0,0 @@ -/* - * jconfig.txt - * - * Copyright (C) 1991-1994, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file documents the configuration options that are required to - * customize the JPEG software for a particular system. - * - * The actual configuration options for a particular installation are stored - * in jconfig.h. On many machines, jconfig.h can be generated automatically - * or copied from one of the "canned" jconfig files that we supply. But if - * you need to generate a jconfig.h file by hand, this file tells you how. - * - * DO NOT EDIT THIS FILE --- IT WON'T ACCOMPLISH ANYTHING. - * EDIT A COPY NAMED JCONFIG.H. - */ - - -/* - * These symbols indicate the properties of your machine or compiler. - * #define the symbol if yes, #undef it if no. - */ - -/* Does your compiler support function prototypes? - * (If not, you also need to use ansi2knr, see install.txt) - */ -#define HAVE_PROTOTYPES - -/* Does your compiler support the declaration "unsigned char" ? - * How about "unsigned short" ? - */ -#define HAVE_UNSIGNED_CHAR -#define HAVE_UNSIGNED_SHORT - -/* Define "void" as "char" if your compiler doesn't know about type void. - * NOTE: be sure to define void such that "void *" represents the most general - * pointer type, e.g., that returned by malloc(). - */ -/* #define void char */ - -/* Define "const" as empty if your compiler doesn't know the "const" keyword. - */ -/* #define const */ - -/* Define this if an ordinary "char" type is unsigned. - * If you're not sure, leaving it undefined will work at some cost in speed. - * If you defined HAVE_UNSIGNED_CHAR then the speed difference is minimal. - */ -#undef CHAR_IS_UNSIGNED - -/* Define this if your system has an ANSI-conforming file. - */ -#define HAVE_STDDEF_H - -/* Define this if your system has an ANSI-conforming file. - */ -#define HAVE_STDLIB_H - -/* Define this if your system does not have an ANSI/SysV , - * but does have a BSD-style . - */ -#undef NEED_BSD_STRINGS - -/* Define this if your system does not provide typedef size_t in any of the - * ANSI-standard places (stddef.h, stdlib.h, or stdio.h), but places it in - * instead. - */ -#undef NEED_SYS_TYPES_H - -/* For 80x86 machines, you need to define NEED_FAR_POINTERS, - * unless you are using a large-data memory model or 80386 flat-memory mode. - * On less brain-damaged CPUs this symbol must not be defined. - * (Defining this symbol causes large data structures to be referenced through - * "far" pointers and to be allocated with a special version of malloc.) - */ -#undef NEED_FAR_POINTERS - -/* Define this if your linker needs global names to be unique in less - * than the first 15 characters. - */ -#undef NEED_SHORT_EXTERNAL_NAMES - -/* Although a real ANSI C compiler can deal perfectly well with pointers to - * unspecified structures (see "incomplete types" in the spec), a few pre-ANSI - * and pseudo-ANSI compilers get confused. To keep one of these bozos happy, - * define INCOMPLETE_TYPES_BROKEN. This is not recommended unless you - * actually get "missing structure definition" warnings or errors while - * compiling the JPEG code. - */ -#undef INCOMPLETE_TYPES_BROKEN - -/* Define "boolean" as unsigned char, not int, on Windows systems. - */ -#ifdef _WIN32 -#ifndef __RPCNDR_H__ /* don't conflict if rpcndr.h already read */ -typedef unsigned char boolean; -#endif -#define HAVE_BOOLEAN /* prevent jmorecfg.h from redefining it */ -#endif - - -/* - * The following options affect code selection within the JPEG library, - * but they don't need to be visible to applications using the library. - * To minimize application namespace pollution, the symbols won't be - * defined unless JPEG_INTERNALS has been defined. - */ - -#ifdef JPEG_INTERNALS - -/* Define this if your compiler implements ">>" on signed values as a logical - * (unsigned) shift; leave it undefined if ">>" is a signed (arithmetic) shift, - * which is the normal and rational definition. - */ -#undef RIGHT_SHIFT_IS_UNSIGNED - - -#endif /* JPEG_INTERNALS */ - - -/* - * The remaining options do not affect the JPEG library proper, - * but only the sample applications cjpeg/djpeg (see cjpeg.c, djpeg.c). - * Other applications can ignore these. - */ - -#ifdef JPEG_CJPEG_DJPEG - -/* These defines indicate which image (non-JPEG) file formats are allowed. */ - -#define BMP_SUPPORTED /* BMP image file format */ -#define GIF_SUPPORTED /* GIF image file format */ -#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ -#undef RLE_SUPPORTED /* Utah RLE image file format */ -#define TARGA_SUPPORTED /* Targa image file format */ - -/* Define this if you want to name both input and output files on the command - * line, rather than using stdout and optionally stdin. You MUST do this if - * your system can't cope with binary I/O to stdin/stdout. See comments at - * head of cjpeg.c or djpeg.c. - */ -#undef TWO_FILE_COMMANDLINE - -/* Define this if your system needs explicit cleanup of temporary files. - * This is crucial under MS-DOS, where the temporary "files" may be areas - * of extended memory; on most other systems it's not as important. - */ -#undef NEED_SIGNAL_CATCHER - -/* By default, we open image files with fopen(...,"rb") or fopen(...,"wb"). - * This is necessary on systems that distinguish text files from binary files, - * and is harmless on most systems that don't. If you have one of the rare - * systems that complains about the "b" spec, define this symbol. - */ -#undef DONT_USE_B_MODE - -/* Define this if you want percent-done progress reports from cjpeg/djpeg. - */ -#undef PROGRESS_REPORT - - -#endif /* JPEG_CJPEG_DJPEG */ diff --git a/jpeg/jconfig.vc b/jpeg/jconfig.vc deleted file mode 100755 index 55d2b00..0000000 --- a/jpeg/jconfig.vc +++ /dev/null @@ -1,45 +0,0 @@ -/* jconfig.vc --- jconfig.h for Microsoft Visual C++ on Windows 95 or NT. */ -/* see jconfig.txt for explanations */ - -#define HAVE_PROTOTYPES -#define HAVE_UNSIGNED_CHAR -#define HAVE_UNSIGNED_SHORT -/* #define void char */ -/* #define const */ -#undef CHAR_IS_UNSIGNED -#define HAVE_STDDEF_H -#define HAVE_STDLIB_H -#undef NEED_BSD_STRINGS -#undef NEED_SYS_TYPES_H -#undef NEED_FAR_POINTERS /* we presume a 32-bit flat memory model */ -#undef NEED_SHORT_EXTERNAL_NAMES -#undef INCOMPLETE_TYPES_BROKEN - -/* Define "boolean" as unsigned char, not int, per Windows custom */ -#ifndef __RPCNDR_H__ /* don't conflict if rpcndr.h already read */ -typedef unsigned char boolean; -#endif -#define HAVE_BOOLEAN /* prevent jmorecfg.h from redefining it */ - - -#ifdef JPEG_INTERNALS - -#undef RIGHT_SHIFT_IS_UNSIGNED - -#endif /* JPEG_INTERNALS */ - -#ifdef JPEG_CJPEG_DJPEG - -#undef BMP_SUPPORTED /* BMP image file format */ -#undef GIF_SUPPORTED /* GIF image file format */ -#undef PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ -#undef RLE_SUPPORTED /* Utah RLE image file format */ -#undef TARGA_SUPPORTED /* Targa image file format */ - -#define TWO_FILE_COMMANDLINE /* optional */ -#define USE_SETMODE /* Microsoft has setmode() */ -#undef NEED_SIGNAL_CATCHER -#undef DONT_USE_B_MODE -#undef PROGRESS_REPORT /* optional */ - -#endif /* JPEG_CJPEG_DJPEG */ diff --git a/jpeg/jconfig.vms b/jpeg/jconfig.vms deleted file mode 100755 index 8337b0b..0000000 --- a/jpeg/jconfig.vms +++ /dev/null @@ -1,37 +0,0 @@ -/* jconfig.vms --- jconfig.h for use on Digital VMS. */ -/* see jconfig.txt for explanations */ - -#define HAVE_PROTOTYPES -#define HAVE_UNSIGNED_CHAR -#define HAVE_UNSIGNED_SHORT -/* #define void char */ -/* #define const */ -#undef CHAR_IS_UNSIGNED -#define HAVE_STDDEF_H -#define HAVE_STDLIB_H -#undef NEED_BSD_STRINGS -#undef NEED_SYS_TYPES_H -#undef NEED_FAR_POINTERS -#undef NEED_SHORT_EXTERNAL_NAMES -#undef INCOMPLETE_TYPES_BROKEN - -#ifdef JPEG_INTERNALS - -#undef RIGHT_SHIFT_IS_UNSIGNED - -#endif /* JPEG_INTERNALS */ - -#ifdef JPEG_CJPEG_DJPEG - -#define BMP_SUPPORTED /* BMP image file format */ -#define GIF_SUPPORTED /* GIF image file format */ -#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ -#undef RLE_SUPPORTED /* Utah RLE image file format */ -#define TARGA_SUPPORTED /* Targa image file format */ - -#define TWO_FILE_COMMANDLINE /* Needed on VMS */ -#undef NEED_SIGNAL_CATCHER -#undef DONT_USE_B_MODE -#undef PROGRESS_REPORT /* optional */ - -#endif /* JPEG_CJPEG_DJPEG */ diff --git a/jpeg/jconfig.wat b/jpeg/jconfig.wat deleted file mode 100755 index 190cc75..0000000 --- a/jpeg/jconfig.wat +++ /dev/null @@ -1,38 +0,0 @@ -/* jconfig.wat --- jconfig.h for Watcom C/C++ on MS-DOS or OS/2. */ -/* see jconfig.txt for explanations */ - -#define HAVE_PROTOTYPES -#define HAVE_UNSIGNED_CHAR -#define HAVE_UNSIGNED_SHORT -/* #define void char */ -/* #define const */ -#define CHAR_IS_UNSIGNED -#define HAVE_STDDEF_H -#define HAVE_STDLIB_H -#undef NEED_BSD_STRINGS -#undef NEED_SYS_TYPES_H -#undef NEED_FAR_POINTERS /* Watcom uses flat 32-bit addressing */ -#undef NEED_SHORT_EXTERNAL_NAMES -#undef INCOMPLETE_TYPES_BROKEN - -#ifdef JPEG_INTERNALS - -#undef RIGHT_SHIFT_IS_UNSIGNED - -#endif /* JPEG_INTERNALS */ - -#ifdef JPEG_CJPEG_DJPEG - -#define BMP_SUPPORTED /* BMP image file format */ -#define GIF_SUPPORTED /* GIF image file format */ -#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ -#undef RLE_SUPPORTED /* Utah RLE image file format */ -#define TARGA_SUPPORTED /* Targa image file format */ - -#undef TWO_FILE_COMMANDLINE /* optional */ -#define USE_SETMODE /* Needed to make one-file style work in Watcom */ -#undef NEED_SIGNAL_CATCHER /* Define this if you use jmemname.c */ -#undef DONT_USE_B_MODE -#undef PROGRESS_REPORT /* optional */ - -#endif /* JPEG_CJPEG_DJPEG */ diff --git a/jpeg/jcparam.c b/jpeg/jcparam.c deleted file mode 100755 index c5e85dd..0000000 --- a/jpeg/jcparam.c +++ /dev/null @@ -1,632 +0,0 @@ -/* - * jcparam.c - * - * Copyright (C) 1991-1998, Thomas G. Lane. - * Modified 2003-2008 by Guido Vollbeding. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains optional default-setting code for the JPEG compressor. - * Applications do not have to use this file, but those that don't use it - * must know a lot more about the innards of the JPEG code. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* - * Quantization table setup routines - */ - -GLOBAL(void) -jpeg_add_quant_table (j_compress_ptr cinfo, int which_tbl, - const unsigned int *basic_table, - int scale_factor, boolean force_baseline) -/* Define a quantization table equal to the basic_table times - * a scale factor (given as a percentage). - * If force_baseline is TRUE, the computed quantization table entries - * are limited to 1..255 for JPEG baseline compatibility. - */ -{ - JQUANT_TBL ** qtblptr; - int i; - long temp; - - /* Safety check to ensure start_compress not called yet. */ - if (cinfo->global_state != CSTATE_START) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - - if (which_tbl < 0 || which_tbl >= NUM_QUANT_TBLS) - ERREXIT1(cinfo, JERR_DQT_INDEX, which_tbl); - - qtblptr = & cinfo->quant_tbl_ptrs[which_tbl]; - - if (*qtblptr == NULL) - *qtblptr = jpeg_alloc_quant_table((j_common_ptr) cinfo); - - for (i = 0; i < DCTSIZE2; i++) { - temp = ((long) basic_table[i] * scale_factor + 50L) / 100L; - /* limit the values to the valid range */ - if (temp <= 0L) temp = 1L; - if (temp > 32767L) temp = 32767L; /* max quantizer needed for 12 bits */ - if (force_baseline && temp > 255L) - temp = 255L; /* limit to baseline range if requested */ - (*qtblptr)->quantval[i] = (UINT16) temp; - } - - /* Initialize sent_table FALSE so table will be written to JPEG file. */ - (*qtblptr)->sent_table = FALSE; -} - - -/* These are the sample quantization tables given in JPEG spec section K.1. - * The spec says that the values given produce "good" quality, and - * when divided by 2, "very good" quality. - */ -static const unsigned int std_luminance_quant_tbl[DCTSIZE2] = { - 16, 11, 10, 16, 24, 40, 51, 61, - 12, 12, 14, 19, 26, 58, 60, 55, - 14, 13, 16, 24, 40, 57, 69, 56, - 14, 17, 22, 29, 51, 87, 80, 62, - 18, 22, 37, 56, 68, 109, 103, 77, - 24, 35, 55, 64, 81, 104, 113, 92, - 49, 64, 78, 87, 103, 121, 120, 101, - 72, 92, 95, 98, 112, 100, 103, 99 -}; -static const unsigned int std_chrominance_quant_tbl[DCTSIZE2] = { - 17, 18, 24, 47, 99, 99, 99, 99, - 18, 21, 26, 66, 99, 99, 99, 99, - 24, 26, 56, 99, 99, 99, 99, 99, - 47, 66, 99, 99, 99, 99, 99, 99, - 99, 99, 99, 99, 99, 99, 99, 99, - 99, 99, 99, 99, 99, 99, 99, 99, - 99, 99, 99, 99, 99, 99, 99, 99, - 99, 99, 99, 99, 99, 99, 99, 99 -}; - - -GLOBAL(void) -jpeg_default_qtables (j_compress_ptr cinfo, boolean force_baseline) -/* Set or change the 'quality' (quantization) setting, using default tables - * and straight percentage-scaling quality scales. - * This entry point allows different scalings for luminance and chrominance. - */ -{ - /* Set up two quantization tables using the specified scaling */ - jpeg_add_quant_table(cinfo, 0, std_luminance_quant_tbl, - cinfo->q_scale_factor[0], force_baseline); - jpeg_add_quant_table(cinfo, 1, std_chrominance_quant_tbl, - cinfo->q_scale_factor[1], force_baseline); -} - - -GLOBAL(void) -jpeg_set_linear_quality (j_compress_ptr cinfo, int scale_factor, - boolean force_baseline) -/* Set or change the 'quality' (quantization) setting, using default tables - * and a straight percentage-scaling quality scale. In most cases it's better - * to use jpeg_set_quality (below); this entry point is provided for - * applications that insist on a linear percentage scaling. - */ -{ - /* Set up two quantization tables using the specified scaling */ - jpeg_add_quant_table(cinfo, 0, std_luminance_quant_tbl, - scale_factor, force_baseline); - jpeg_add_quant_table(cinfo, 1, std_chrominance_quant_tbl, - scale_factor, force_baseline); -} - - -GLOBAL(int) -jpeg_quality_scaling (int quality) -/* Convert a user-specified quality rating to a percentage scaling factor - * for an underlying quantization table, using our recommended scaling curve. - * The input 'quality' factor should be 0 (terrible) to 100 (very good). - */ -{ - /* Safety limit on quality factor. Convert 0 to 1 to avoid zero divide. */ - if (quality <= 0) quality = 1; - if (quality > 100) quality = 100; - - /* The basic table is used as-is (scaling 100) for a quality of 50. - * Qualities 50..100 are converted to scaling percentage 200 - 2*Q; - * note that at Q=100 the scaling is 0, which will cause jpeg_add_quant_table - * to make all the table entries 1 (hence, minimum quantization loss). - * Qualities 1..50 are converted to scaling percentage 5000/Q. - */ - if (quality < 50) - quality = 5000 / quality; - else - quality = 200 - quality*2; - - return quality; -} - - -GLOBAL(void) -jpeg_set_quality (j_compress_ptr cinfo, int quality, boolean force_baseline) -/* Set or change the 'quality' (quantization) setting, using default tables. - * This is the standard quality-adjusting entry point for typical user - * interfaces; only those who want detailed control over quantization tables - * would use the preceding three routines directly. - */ -{ - /* Convert user 0-100 rating to percentage scaling */ - quality = jpeg_quality_scaling(quality); - - /* Set up standard quality tables */ - jpeg_set_linear_quality(cinfo, quality, force_baseline); -} - - -/* - * Huffman table setup routines - */ - -LOCAL(void) -add_huff_table (j_compress_ptr cinfo, - JHUFF_TBL **htblptr, const UINT8 *bits, const UINT8 *val) -/* Define a Huffman table */ -{ - int nsymbols, len; - - if (*htblptr == NULL) - *htblptr = jpeg_alloc_huff_table((j_common_ptr) cinfo); - - /* Copy the number-of-symbols-of-each-code-length counts */ - MEMCOPY((*htblptr)->bits, bits, SIZEOF((*htblptr)->bits)); - - /* Validate the counts. We do this here mainly so we can copy the right - * number of symbols from the val[] array, without risking marching off - * the end of memory. jchuff.c will do a more thorough test later. - */ - nsymbols = 0; - for (len = 1; len <= 16; len++) - nsymbols += bits[len]; - if (nsymbols < 1 || nsymbols > 256) - ERREXIT(cinfo, JERR_BAD_HUFF_TABLE); - - MEMCOPY((*htblptr)->huffval, val, nsymbols * SIZEOF(UINT8)); - - /* Initialize sent_table FALSE so table will be written to JPEG file. */ - (*htblptr)->sent_table = FALSE; -} - - -LOCAL(void) -std_huff_tables (j_compress_ptr cinfo) -/* Set up the standard Huffman tables (cf. JPEG standard section K.3) */ -/* IMPORTANT: these are only valid for 8-bit data precision! */ -{ - static const UINT8 bits_dc_luminance[17] = - { /* 0-base */ 0, 0, 1, 5, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0 }; - static const UINT8 val_dc_luminance[] = - { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11 }; - - static const UINT8 bits_dc_chrominance[17] = - { /* 0-base */ 0, 0, 3, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0 }; - static const UINT8 val_dc_chrominance[] = - { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11 }; - - static const UINT8 bits_ac_luminance[17] = - { /* 0-base */ 0, 0, 2, 1, 3, 3, 2, 4, 3, 5, 5, 4, 4, 0, 0, 1, 0x7d }; - static const UINT8 val_ac_luminance[] = - { 0x01, 0x02, 0x03, 0x00, 0x04, 0x11, 0x05, 0x12, - 0x21, 0x31, 0x41, 0x06, 0x13, 0x51, 0x61, 0x07, - 0x22, 0x71, 0x14, 0x32, 0x81, 0x91, 0xa1, 0x08, - 0x23, 0x42, 0xb1, 0xc1, 0x15, 0x52, 0xd1, 0xf0, - 0x24, 0x33, 0x62, 0x72, 0x82, 0x09, 0x0a, 0x16, - 0x17, 0x18, 0x19, 0x1a, 0x25, 0x26, 0x27, 0x28, - 0x29, 0x2a, 0x34, 0x35, 0x36, 0x37, 0x38, 0x39, - 0x3a, 0x43, 0x44, 0x45, 0x46, 0x47, 0x48, 0x49, - 0x4a, 0x53, 0x54, 0x55, 0x56, 0x57, 0x58, 0x59, - 0x5a, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68, 0x69, - 0x6a, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78, 0x79, - 0x7a, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, - 0x8a, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97, 0x98, - 0x99, 0x9a, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7, - 0xa8, 0xa9, 0xaa, 0xb2, 0xb3, 0xb4, 0xb5, 0xb6, - 0xb7, 0xb8, 0xb9, 0xba, 0xc2, 0xc3, 0xc4, 0xc5, - 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xd2, 0xd3, 0xd4, - 0xd5, 0xd6, 0xd7, 0xd8, 0xd9, 0xda, 0xe1, 0xe2, - 0xe3, 0xe4, 0xe5, 0xe6, 0xe7, 0xe8, 0xe9, 0xea, - 0xf1, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7, 0xf8, - 0xf9, 0xfa }; - - static const UINT8 bits_ac_chrominance[17] = - { /* 0-base */ 0, 0, 2, 1, 2, 4, 4, 3, 4, 7, 5, 4, 4, 0, 1, 2, 0x77 }; - static const UINT8 val_ac_chrominance[] = - { 0x00, 0x01, 0x02, 0x03, 0x11, 0x04, 0x05, 0x21, - 0x31, 0x06, 0x12, 0x41, 0x51, 0x07, 0x61, 0x71, - 0x13, 0x22, 0x32, 0x81, 0x08, 0x14, 0x42, 0x91, - 0xa1, 0xb1, 0xc1, 0x09, 0x23, 0x33, 0x52, 0xf0, - 0x15, 0x62, 0x72, 0xd1, 0x0a, 0x16, 0x24, 0x34, - 0xe1, 0x25, 0xf1, 0x17, 0x18, 0x19, 0x1a, 0x26, - 0x27, 0x28, 0x29, 0x2a, 0x35, 0x36, 0x37, 0x38, - 0x39, 0x3a, 0x43, 0x44, 0x45, 0x46, 0x47, 0x48, - 0x49, 0x4a, 0x53, 0x54, 0x55, 0x56, 0x57, 0x58, - 0x59, 0x5a, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68, - 0x69, 0x6a, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78, - 0x79, 0x7a, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, - 0x88, 0x89, 0x8a, 0x92, 0x93, 0x94, 0x95, 0x96, - 0x97, 0x98, 0x99, 0x9a, 0xa2, 0xa3, 0xa4, 0xa5, - 0xa6, 0xa7, 0xa8, 0xa9, 0xaa, 0xb2, 0xb3, 0xb4, - 0xb5, 0xb6, 0xb7, 0xb8, 0xb9, 0xba, 0xc2, 0xc3, - 0xc4, 0xc5, 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xd2, - 0xd3, 0xd4, 0xd5, 0xd6, 0xd7, 0xd8, 0xd9, 0xda, - 0xe2, 0xe3, 0xe4, 0xe5, 0xe6, 0xe7, 0xe8, 0xe9, - 0xea, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7, 0xf8, - 0xf9, 0xfa }; - - add_huff_table(cinfo, &cinfo->dc_huff_tbl_ptrs[0], - bits_dc_luminance, val_dc_luminance); - add_huff_table(cinfo, &cinfo->ac_huff_tbl_ptrs[0], - bits_ac_luminance, val_ac_luminance); - add_huff_table(cinfo, &cinfo->dc_huff_tbl_ptrs[1], - bits_dc_chrominance, val_dc_chrominance); - add_huff_table(cinfo, &cinfo->ac_huff_tbl_ptrs[1], - bits_ac_chrominance, val_ac_chrominance); -} - - -/* - * Default parameter setup for compression. - * - * Applications that don't choose to use this routine must do their - * own setup of all these parameters. Alternately, you can call this - * to establish defaults and then alter parameters selectively. This - * is the recommended approach since, if we add any new parameters, - * your code will still work (they'll be set to reasonable defaults). - */ - -GLOBAL(void) -jpeg_set_defaults (j_compress_ptr cinfo) -{ - int i; - - /* Safety check to ensure start_compress not called yet. */ - if (cinfo->global_state != CSTATE_START) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - - /* Allocate comp_info array large enough for maximum component count. - * Array is made permanent in case application wants to compress - * multiple images at same param settings. - */ - if (cinfo->comp_info == NULL) - cinfo->comp_info = (jpeg_component_info *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT, - MAX_COMPONENTS * SIZEOF(jpeg_component_info)); - - /* Initialize everything not dependent on the color space */ - - cinfo->scale_num = 1; /* 1:1 scaling */ - cinfo->scale_denom = 1; - cinfo->data_precision = BITS_IN_JSAMPLE; - /* Set up two quantization tables using default quality of 75 */ - jpeg_set_quality(cinfo, 75, TRUE); - /* Set up two Huffman tables */ - std_huff_tables(cinfo); - - /* Initialize default arithmetic coding conditioning */ - for (i = 0; i < NUM_ARITH_TBLS; i++) { - cinfo->arith_dc_L[i] = 0; - cinfo->arith_dc_U[i] = 1; - cinfo->arith_ac_K[i] = 5; - } - - /* Default is no multiple-scan output */ - cinfo->scan_info = NULL; - cinfo->num_scans = 0; - - /* Expect normal source image, not raw downsampled data */ - cinfo->raw_data_in = FALSE; - - /* Use Huffman coding, not arithmetic coding, by default */ - cinfo->arith_code = FALSE; - - /* By default, don't do extra passes to optimize entropy coding */ - cinfo->optimize_coding = FALSE; - /* The standard Huffman tables are only valid for 8-bit data precision. - * If the precision is higher, force optimization on so that usable - * tables will be computed. This test can be removed if default tables - * are supplied that are valid for the desired precision. - */ - if (cinfo->data_precision > 8) - cinfo->optimize_coding = TRUE; - - /* By default, use the simpler non-cosited sampling alignment */ - cinfo->CCIR601_sampling = FALSE; - - /* By default, apply fancy downsampling */ - cinfo->do_fancy_downsampling = TRUE; - - /* No input smoothing */ - cinfo->smoothing_factor = 0; - - /* DCT algorithm preference */ - cinfo->dct_method = JDCT_DEFAULT; - - /* No restart markers */ - cinfo->restart_interval = 0; - cinfo->restart_in_rows = 0; - - /* Fill in default JFIF marker parameters. Note that whether the marker - * will actually be written is determined by jpeg_set_colorspace. - * - * By default, the library emits JFIF version code 1.01. - * An application that wants to emit JFIF 1.02 extension markers should set - * JFIF_minor_version to 2. We could probably get away with just defaulting - * to 1.02, but there may still be some decoders in use that will complain - * about that; saying 1.01 should minimize compatibility problems. - */ - cinfo->JFIF_major_version = 1; /* Default JFIF version = 1.01 */ - cinfo->JFIF_minor_version = 1; - cinfo->density_unit = 0; /* Pixel size is unknown by default */ - cinfo->X_density = 1; /* Pixel aspect ratio is square by default */ - cinfo->Y_density = 1; - - /* Choose JPEG colorspace based on input space, set defaults accordingly */ - - jpeg_default_colorspace(cinfo); -} - - -/* - * Select an appropriate JPEG colorspace for in_color_space. - */ - -GLOBAL(void) -jpeg_default_colorspace (j_compress_ptr cinfo) -{ - switch (cinfo->in_color_space) { - case JCS_GRAYSCALE: - jpeg_set_colorspace(cinfo, JCS_GRAYSCALE); - break; - case JCS_RGB: - jpeg_set_colorspace(cinfo, JCS_YCbCr); - break; - case JCS_YCbCr: - jpeg_set_colorspace(cinfo, JCS_YCbCr); - break; - case JCS_CMYK: - jpeg_set_colorspace(cinfo, JCS_CMYK); /* By default, no translation */ - break; - case JCS_YCCK: - jpeg_set_colorspace(cinfo, JCS_YCCK); - break; - case JCS_UNKNOWN: - jpeg_set_colorspace(cinfo, JCS_UNKNOWN); - break; - default: - ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE); - } -} - - -/* - * Set the JPEG colorspace, and choose colorspace-dependent default values. - */ - -GLOBAL(void) -jpeg_set_colorspace (j_compress_ptr cinfo, J_COLOR_SPACE colorspace) -{ - jpeg_component_info * compptr; - int ci; - -#define SET_COMP(index,id,hsamp,vsamp,quant,dctbl,actbl) \ - (compptr = &cinfo->comp_info[index], \ - compptr->component_id = (id), \ - compptr->h_samp_factor = (hsamp), \ - compptr->v_samp_factor = (vsamp), \ - compptr->quant_tbl_no = (quant), \ - compptr->dc_tbl_no = (dctbl), \ - compptr->ac_tbl_no = (actbl) ) - - /* Safety check to ensure start_compress not called yet. */ - if (cinfo->global_state != CSTATE_START) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - - /* For all colorspaces, we use Q and Huff tables 0 for luminance components, - * tables 1 for chrominance components. - */ - - cinfo->jpeg_color_space = colorspace; - - cinfo->write_JFIF_header = FALSE; /* No marker for non-JFIF colorspaces */ - cinfo->write_Adobe_marker = FALSE; /* write no Adobe marker by default */ - - switch (colorspace) { - case JCS_GRAYSCALE: - cinfo->write_JFIF_header = TRUE; /* Write a JFIF marker */ - cinfo->num_components = 1; - /* JFIF specifies component ID 1 */ - SET_COMP(0, 1, 1,1, 0, 0,0); - break; - case JCS_RGB: - cinfo->write_Adobe_marker = TRUE; /* write Adobe marker to flag RGB */ - cinfo->num_components = 3; - SET_COMP(0, 0x52 /* 'R' */, 1,1, 0, 0,0); - SET_COMP(1, 0x47 /* 'G' */, 1,1, 0, 0,0); - SET_COMP(2, 0x42 /* 'B' */, 1,1, 0, 0,0); - break; - case JCS_YCbCr: - cinfo->write_JFIF_header = TRUE; /* Write a JFIF marker */ - cinfo->num_components = 3; - /* JFIF specifies component IDs 1,2,3 */ - /* We default to 2x2 subsamples of chrominance */ - SET_COMP(0, 1, 2,2, 0, 0,0); - SET_COMP(1, 2, 1,1, 1, 1,1); - SET_COMP(2, 3, 1,1, 1, 1,1); - break; - case JCS_CMYK: - cinfo->write_Adobe_marker = TRUE; /* write Adobe marker to flag CMYK */ - cinfo->num_components = 4; - SET_COMP(0, 0x43 /* 'C' */, 1,1, 0, 0,0); - SET_COMP(1, 0x4D /* 'M' */, 1,1, 0, 0,0); - SET_COMP(2, 0x59 /* 'Y' */, 1,1, 0, 0,0); - SET_COMP(3, 0x4B /* 'K' */, 1,1, 0, 0,0); - break; - case JCS_YCCK: - cinfo->write_Adobe_marker = TRUE; /* write Adobe marker to flag YCCK */ - cinfo->num_components = 4; - SET_COMP(0, 1, 2,2, 0, 0,0); - SET_COMP(1, 2, 1,1, 1, 1,1); - SET_COMP(2, 3, 1,1, 1, 1,1); - SET_COMP(3, 4, 2,2, 0, 0,0); - break; - case JCS_UNKNOWN: - cinfo->num_components = cinfo->input_components; - if (cinfo->num_components < 1 || cinfo->num_components > MAX_COMPONENTS) - ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->num_components, - MAX_COMPONENTS); - for (ci = 0; ci < cinfo->num_components; ci++) { - SET_COMP(ci, ci, 1,1, 0, 0,0); - } - break; - default: - ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); - } -} - - -#ifdef C_PROGRESSIVE_SUPPORTED - -LOCAL(jpeg_scan_info *) -fill_a_scan (jpeg_scan_info * scanptr, int ci, - int Ss, int Se, int Ah, int Al) -/* Support routine: generate one scan for specified component */ -{ - scanptr->comps_in_scan = 1; - scanptr->component_index[0] = ci; - scanptr->Ss = Ss; - scanptr->Se = Se; - scanptr->Ah = Ah; - scanptr->Al = Al; - scanptr++; - return scanptr; -} - -LOCAL(jpeg_scan_info *) -fill_scans (jpeg_scan_info * scanptr, int ncomps, - int Ss, int Se, int Ah, int Al) -/* Support routine: generate one scan for each component */ -{ - int ci; - - for (ci = 0; ci < ncomps; ci++) { - scanptr->comps_in_scan = 1; - scanptr->component_index[0] = ci; - scanptr->Ss = Ss; - scanptr->Se = Se; - scanptr->Ah = Ah; - scanptr->Al = Al; - scanptr++; - } - return scanptr; -} - -LOCAL(jpeg_scan_info *) -fill_dc_scans (jpeg_scan_info * scanptr, int ncomps, int Ah, int Al) -/* Support routine: generate interleaved DC scan if possible, else N scans */ -{ - int ci; - - if (ncomps <= MAX_COMPS_IN_SCAN) { - /* Single interleaved DC scan */ - scanptr->comps_in_scan = ncomps; - for (ci = 0; ci < ncomps; ci++) - scanptr->component_index[ci] = ci; - scanptr->Ss = scanptr->Se = 0; - scanptr->Ah = Ah; - scanptr->Al = Al; - scanptr++; - } else { - /* Noninterleaved DC scan for each component */ - scanptr = fill_scans(scanptr, ncomps, 0, 0, Ah, Al); - } - return scanptr; -} - - -/* - * Create a recommended progressive-JPEG script. - * cinfo->num_components and cinfo->jpeg_color_space must be correct. - */ - -GLOBAL(void) -jpeg_simple_progression (j_compress_ptr cinfo) -{ - int ncomps = cinfo->num_components; - int nscans; - jpeg_scan_info * scanptr; - - /* Safety check to ensure start_compress not called yet. */ - if (cinfo->global_state != CSTATE_START) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - - /* Figure space needed for script. Calculation must match code below! */ - if (ncomps == 3 && cinfo->jpeg_color_space == JCS_YCbCr) { - /* Custom script for YCbCr color images. */ - nscans = 10; - } else { - /* All-purpose script for other color spaces. */ - if (ncomps > MAX_COMPS_IN_SCAN) - nscans = 6 * ncomps; /* 2 DC + 4 AC scans per component */ - else - nscans = 2 + 4 * ncomps; /* 2 DC scans; 4 AC scans per component */ - } - - /* Allocate space for script. - * We need to put it in the permanent pool in case the application performs - * multiple compressions without changing the settings. To avoid a memory - * leak if jpeg_simple_progression is called repeatedly for the same JPEG - * object, we try to re-use previously allocated space, and we allocate - * enough space to handle YCbCr even if initially asked for grayscale. - */ - if (cinfo->script_space == NULL || cinfo->script_space_size < nscans) { - cinfo->script_space_size = MAX(nscans, 10); - cinfo->script_space = (jpeg_scan_info *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT, - cinfo->script_space_size * SIZEOF(jpeg_scan_info)); - } - scanptr = cinfo->script_space; - cinfo->scan_info = scanptr; - cinfo->num_scans = nscans; - - if (ncomps == 3 && cinfo->jpeg_color_space == JCS_YCbCr) { - /* Custom script for YCbCr color images. */ - /* Initial DC scan */ - scanptr = fill_dc_scans(scanptr, ncomps, 0, 1); - /* Initial AC scan: get some luma data out in a hurry */ - scanptr = fill_a_scan(scanptr, 0, 1, 5, 0, 2); - /* Chroma data is too small to be worth expending many scans on */ - scanptr = fill_a_scan(scanptr, 2, 1, 63, 0, 1); - scanptr = fill_a_scan(scanptr, 1, 1, 63, 0, 1); - /* Complete spectral selection for luma AC */ - scanptr = fill_a_scan(scanptr, 0, 6, 63, 0, 2); - /* Refine next bit of luma AC */ - scanptr = fill_a_scan(scanptr, 0, 1, 63, 2, 1); - /* Finish DC successive approximation */ - scanptr = fill_dc_scans(scanptr, ncomps, 1, 0); - /* Finish AC successive approximation */ - scanptr = fill_a_scan(scanptr, 2, 1, 63, 1, 0); - scanptr = fill_a_scan(scanptr, 1, 1, 63, 1, 0); - /* Luma bottom bit comes last since it's usually largest scan */ - scanptr = fill_a_scan(scanptr, 0, 1, 63, 1, 0); - } else { - /* All-purpose script for other color spaces. */ - /* Successive approximation first pass */ - scanptr = fill_dc_scans(scanptr, ncomps, 0, 1); - scanptr = fill_scans(scanptr, ncomps, 1, 5, 0, 2); - scanptr = fill_scans(scanptr, ncomps, 6, 63, 0, 2); - /* Successive approximation second pass */ - scanptr = fill_scans(scanptr, ncomps, 1, 63, 2, 1); - /* Successive approximation final pass */ - scanptr = fill_dc_scans(scanptr, ncomps, 1, 0); - scanptr = fill_scans(scanptr, ncomps, 1, 63, 1, 0); - } -} - -#endif /* C_PROGRESSIVE_SUPPORTED */ diff --git a/jpeg/jcprepct.c b/jpeg/jcprepct.c deleted file mode 100755 index be44cc4..0000000 --- a/jpeg/jcprepct.c +++ /dev/null @@ -1,358 +0,0 @@ -/* - * jcprepct.c - * - * Copyright (C) 1994-1996, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains the compression preprocessing controller. - * This controller manages the color conversion, downsampling, - * and edge expansion steps. - * - * Most of the complexity here is associated with buffering input rows - * as required by the downsampler. See the comments at the head of - * jcsample.c for the downsampler's needs. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* At present, jcsample.c can request context rows only for smoothing. - * In the future, we might also need context rows for CCIR601 sampling - * or other more-complex downsampling procedures. The code to support - * context rows should be compiled only if needed. - */ -#ifdef INPUT_SMOOTHING_SUPPORTED -#define CONTEXT_ROWS_SUPPORTED -#endif - - -/* - * For the simple (no-context-row) case, we just need to buffer one - * row group's worth of pixels for the downsampling step. At the bottom of - * the image, we pad to a full row group by replicating the last pixel row. - * The downsampler's last output row is then replicated if needed to pad - * out to a full iMCU row. - * - * When providing context rows, we must buffer three row groups' worth of - * pixels. Three row groups are physically allocated, but the row pointer - * arrays are made five row groups high, with the extra pointers above and - * below "wrapping around" to point to the last and first real row groups. - * This allows the downsampler to access the proper context rows. - * At the top and bottom of the image, we create dummy context rows by - * copying the first or last real pixel row. This copying could be avoided - * by pointer hacking as is done in jdmainct.c, but it doesn't seem worth the - * trouble on the compression side. - */ - - -/* Private buffer controller object */ - -typedef struct { - struct jpeg_c_prep_controller pub; /* public fields */ - - /* Downsampling input buffer. This buffer holds color-converted data - * until we have enough to do a downsample step. - */ - JSAMPARRAY color_buf[MAX_COMPONENTS]; - - JDIMENSION rows_to_go; /* counts rows remaining in source image */ - int next_buf_row; /* index of next row to store in color_buf */ - -#ifdef CONTEXT_ROWS_SUPPORTED /* only needed for context case */ - int this_row_group; /* starting row index of group to process */ - int next_buf_stop; /* downsample when we reach this index */ -#endif -} my_prep_controller; - -typedef my_prep_controller * my_prep_ptr; - - -/* - * Initialize for a processing pass. - */ - -METHODDEF(void) -start_pass_prep (j_compress_ptr cinfo, J_BUF_MODE pass_mode) -{ - my_prep_ptr prep = (my_prep_ptr) cinfo->prep; - - if (pass_mode != JBUF_PASS_THRU) - ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); - - /* Initialize total-height counter for detecting bottom of image */ - prep->rows_to_go = cinfo->image_height; - /* Mark the conversion buffer empty */ - prep->next_buf_row = 0; -#ifdef CONTEXT_ROWS_SUPPORTED - /* Preset additional state variables for context mode. - * These aren't used in non-context mode, so we needn't test which mode. - */ - prep->this_row_group = 0; - /* Set next_buf_stop to stop after two row groups have been read in. */ - prep->next_buf_stop = 2 * cinfo->max_v_samp_factor; -#endif -} - - -/* - * Expand an image vertically from height input_rows to height output_rows, - * by duplicating the bottom row. - */ - -LOCAL(void) -expand_bottom_edge (JSAMPARRAY image_data, JDIMENSION num_cols, - int input_rows, int output_rows) -{ - register int row; - - for (row = input_rows; row < output_rows; row++) { - jcopy_sample_rows(image_data, input_rows-1, image_data, row, - 1, num_cols); - } -} - - -/* - * Process some data in the simple no-context case. - * - * Preprocessor output data is counted in "row groups". A row group - * is defined to be v_samp_factor sample rows of each component. - * Downsampling will produce this much data from each max_v_samp_factor - * input rows. - */ - -METHODDEF(void) -pre_process_data (j_compress_ptr cinfo, - JSAMPARRAY input_buf, JDIMENSION *in_row_ctr, - JDIMENSION in_rows_avail, - JSAMPIMAGE output_buf, JDIMENSION *out_row_group_ctr, - JDIMENSION out_row_groups_avail) -{ - my_prep_ptr prep = (my_prep_ptr) cinfo->prep; - int numrows, ci; - JDIMENSION inrows; - jpeg_component_info * compptr; - - while (*in_row_ctr < in_rows_avail && - *out_row_group_ctr < out_row_groups_avail) { - /* Do color conversion to fill the conversion buffer. */ - inrows = in_rows_avail - *in_row_ctr; - numrows = cinfo->max_v_samp_factor - prep->next_buf_row; - numrows = (int) MIN((JDIMENSION) numrows, inrows); - (*cinfo->cconvert->color_convert) (cinfo, input_buf + *in_row_ctr, - prep->color_buf, - (JDIMENSION) prep->next_buf_row, - numrows); - *in_row_ctr += numrows; - prep->next_buf_row += numrows; - prep->rows_to_go -= numrows; - /* If at bottom of image, pad to fill the conversion buffer. */ - if (prep->rows_to_go == 0 && - prep->next_buf_row < cinfo->max_v_samp_factor) { - for (ci = 0; ci < cinfo->num_components; ci++) { - expand_bottom_edge(prep->color_buf[ci], cinfo->image_width, - prep->next_buf_row, cinfo->max_v_samp_factor); - } - prep->next_buf_row = cinfo->max_v_samp_factor; - } - /* If we've filled the conversion buffer, empty it. */ - if (prep->next_buf_row == cinfo->max_v_samp_factor) { - (*cinfo->downsample->downsample) (cinfo, - prep->color_buf, (JDIMENSION) 0, - output_buf, *out_row_group_ctr); - prep->next_buf_row = 0; - (*out_row_group_ctr)++; - } - /* If at bottom of image, pad the output to a full iMCU height. - * Note we assume the caller is providing a one-iMCU-height output buffer! - */ - if (prep->rows_to_go == 0 && - *out_row_group_ctr < out_row_groups_avail) { - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - numrows = (compptr->v_samp_factor * compptr->DCT_v_scaled_size) / - cinfo->min_DCT_v_scaled_size; - expand_bottom_edge(output_buf[ci], - compptr->width_in_blocks * compptr->DCT_h_scaled_size, - (int) (*out_row_group_ctr * numrows), - (int) (out_row_groups_avail * numrows)); - } - *out_row_group_ctr = out_row_groups_avail; - break; /* can exit outer loop without test */ - } - } -} - - -#ifdef CONTEXT_ROWS_SUPPORTED - -/* - * Process some data in the context case. - */ - -METHODDEF(void) -pre_process_context (j_compress_ptr cinfo, - JSAMPARRAY input_buf, JDIMENSION *in_row_ctr, - JDIMENSION in_rows_avail, - JSAMPIMAGE output_buf, JDIMENSION *out_row_group_ctr, - JDIMENSION out_row_groups_avail) -{ - my_prep_ptr prep = (my_prep_ptr) cinfo->prep; - int numrows, ci; - int buf_height = cinfo->max_v_samp_factor * 3; - JDIMENSION inrows; - - while (*out_row_group_ctr < out_row_groups_avail) { - if (*in_row_ctr < in_rows_avail) { - /* Do color conversion to fill the conversion buffer. */ - inrows = in_rows_avail - *in_row_ctr; - numrows = prep->next_buf_stop - prep->next_buf_row; - numrows = (int) MIN((JDIMENSION) numrows, inrows); - (*cinfo->cconvert->color_convert) (cinfo, input_buf + *in_row_ctr, - prep->color_buf, - (JDIMENSION) prep->next_buf_row, - numrows); - /* Pad at top of image, if first time through */ - if (prep->rows_to_go == cinfo->image_height) { - for (ci = 0; ci < cinfo->num_components; ci++) { - int row; - for (row = 1; row <= cinfo->max_v_samp_factor; row++) { - jcopy_sample_rows(prep->color_buf[ci], 0, - prep->color_buf[ci], -row, - 1, cinfo->image_width); - } - } - } - *in_row_ctr += numrows; - prep->next_buf_row += numrows; - prep->rows_to_go -= numrows; - } else { - /* Return for more data, unless we are at the bottom of the image. */ - if (prep->rows_to_go != 0) - break; - /* When at bottom of image, pad to fill the conversion buffer. */ - if (prep->next_buf_row < prep->next_buf_stop) { - for (ci = 0; ci < cinfo->num_components; ci++) { - expand_bottom_edge(prep->color_buf[ci], cinfo->image_width, - prep->next_buf_row, prep->next_buf_stop); - } - prep->next_buf_row = prep->next_buf_stop; - } - } - /* If we've gotten enough data, downsample a row group. */ - if (prep->next_buf_row == prep->next_buf_stop) { - (*cinfo->downsample->downsample) (cinfo, - prep->color_buf, - (JDIMENSION) prep->this_row_group, - output_buf, *out_row_group_ctr); - (*out_row_group_ctr)++; - /* Advance pointers with wraparound as necessary. */ - prep->this_row_group += cinfo->max_v_samp_factor; - if (prep->this_row_group >= buf_height) - prep->this_row_group = 0; - if (prep->next_buf_row >= buf_height) - prep->next_buf_row = 0; - prep->next_buf_stop = prep->next_buf_row + cinfo->max_v_samp_factor; - } - } -} - - -/* - * Create the wrapped-around downsampling input buffer needed for context mode. - */ - -LOCAL(void) -create_context_buffer (j_compress_ptr cinfo) -{ - my_prep_ptr prep = (my_prep_ptr) cinfo->prep; - int rgroup_height = cinfo->max_v_samp_factor; - int ci, i; - jpeg_component_info * compptr; - JSAMPARRAY true_buffer, fake_buffer; - - /* Grab enough space for fake row pointers for all the components; - * we need five row groups' worth of pointers for each component. - */ - fake_buffer = (JSAMPARRAY) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - (cinfo->num_components * 5 * rgroup_height) * - SIZEOF(JSAMPROW)); - - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - /* Allocate the actual buffer space (3 row groups) for this component. - * We make the buffer wide enough to allow the downsampler to edge-expand - * horizontally within the buffer, if it so chooses. - */ - true_buffer = (*cinfo->mem->alloc_sarray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, - (JDIMENSION) (((long) compptr->width_in_blocks * - cinfo->min_DCT_h_scaled_size * - cinfo->max_h_samp_factor) / compptr->h_samp_factor), - (JDIMENSION) (3 * rgroup_height)); - /* Copy true buffer row pointers into the middle of the fake row array */ - MEMCOPY(fake_buffer + rgroup_height, true_buffer, - 3 * rgroup_height * SIZEOF(JSAMPROW)); - /* Fill in the above and below wraparound pointers */ - for (i = 0; i < rgroup_height; i++) { - fake_buffer[i] = true_buffer[2 * rgroup_height + i]; - fake_buffer[4 * rgroup_height + i] = true_buffer[i]; - } - prep->color_buf[ci] = fake_buffer + rgroup_height; - fake_buffer += 5 * rgroup_height; /* point to space for next component */ - } -} - -#endif /* CONTEXT_ROWS_SUPPORTED */ - - -/* - * Initialize preprocessing controller. - */ - -GLOBAL(void) -jinit_c_prep_controller (j_compress_ptr cinfo, boolean need_full_buffer) -{ - my_prep_ptr prep; - int ci; - jpeg_component_info * compptr; - - if (need_full_buffer) /* safety check */ - ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); - - prep = (my_prep_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(my_prep_controller)); - cinfo->prep = (struct jpeg_c_prep_controller *) prep; - prep->pub.start_pass = start_pass_prep; - - /* Allocate the color conversion buffer. - * We make the buffer wide enough to allow the downsampler to edge-expand - * horizontally within the buffer, if it so chooses. - */ - if (cinfo->downsample->need_context_rows) { - /* Set up to provide context rows */ -#ifdef CONTEXT_ROWS_SUPPORTED - prep->pub.pre_process_data = pre_process_context; - create_context_buffer(cinfo); -#else - ERREXIT(cinfo, JERR_NOT_COMPILED); -#endif - } else { - /* No context, just make it tall enough for one row group */ - prep->pub.pre_process_data = pre_process_data; - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - prep->color_buf[ci] = (*cinfo->mem->alloc_sarray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, - (JDIMENSION) (((long) compptr->width_in_blocks * - cinfo->min_DCT_h_scaled_size * - cinfo->max_h_samp_factor) / compptr->h_samp_factor), - (JDIMENSION) cinfo->max_v_samp_factor); - } - } -} diff --git a/jpeg/jcsample.c b/jpeg/jcsample.c deleted file mode 100755 index 4d36f85..0000000 --- a/jpeg/jcsample.c +++ /dev/null @@ -1,545 +0,0 @@ -/* - * jcsample.c - * - * Copyright (C) 1991-1996, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains downsampling routines. - * - * Downsampling input data is counted in "row groups". A row group - * is defined to be max_v_samp_factor pixel rows of each component, - * from which the downsampler produces v_samp_factor sample rows. - * A single row group is processed in each call to the downsampler module. - * - * The downsampler is responsible for edge-expansion of its output data - * to fill an integral number of DCT blocks horizontally. The source buffer - * may be modified if it is helpful for this purpose (the source buffer is - * allocated wide enough to correspond to the desired output width). - * The caller (the prep controller) is responsible for vertical padding. - * - * The downsampler may request "context rows" by setting need_context_rows - * during startup. In this case, the input arrays will contain at least - * one row group's worth of pixels above and below the passed-in data; - * the caller will create dummy rows at image top and bottom by replicating - * the first or last real pixel row. - * - * An excellent reference for image resampling is - * Digital Image Warping, George Wolberg, 1990. - * Pub. by IEEE Computer Society Press, Los Alamitos, CA. ISBN 0-8186-8944-7. - * - * The downsampling algorithm used here is a simple average of the source - * pixels covered by the output pixel. The hi-falutin sampling literature - * refers to this as a "box filter". In general the characteristics of a box - * filter are not very good, but for the specific cases we normally use (1:1 - * and 2:1 ratios) the box is equivalent to a "triangle filter" which is not - * nearly so bad. If you intend to use other sampling ratios, you'd be well - * advised to improve this code. - * - * A simple input-smoothing capability is provided. This is mainly intended - * for cleaning up color-dithered GIF input files (if you find it inadequate, - * we suggest using an external filtering program such as pnmconvol). When - * enabled, each input pixel P is replaced by a weighted sum of itself and its - * eight neighbors. P's weight is 1-8*SF and each neighbor's weight is SF, - * where SF = (smoothing_factor / 1024). - * Currently, smoothing is only supported for 2h2v sampling factors. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* Pointer to routine to downsample a single component */ -typedef JMETHOD(void, downsample1_ptr, - (j_compress_ptr cinfo, jpeg_component_info * compptr, - JSAMPARRAY input_data, JSAMPARRAY output_data)); - -/* Private subobject */ - -typedef struct { - struct jpeg_downsampler pub; /* public fields */ - - /* Downsampling method pointers, one per component */ - downsample1_ptr methods[MAX_COMPONENTS]; - - /* Height of an output row group for each component. */ - int rowgroup_height[MAX_COMPONENTS]; - - /* These arrays save pixel expansion factors so that int_downsample need not - * recompute them each time. They are unused for other downsampling methods. - */ - UINT8 h_expand[MAX_COMPONENTS]; - UINT8 v_expand[MAX_COMPONENTS]; -} my_downsampler; - -typedef my_downsampler * my_downsample_ptr; - - -/* - * Initialize for a downsampling pass. - */ - -METHODDEF(void) -start_pass_downsample (j_compress_ptr cinfo) -{ - /* no work for now */ -} - - -/* - * Expand a component horizontally from width input_cols to width output_cols, - * by duplicating the rightmost samples. - */ - -LOCAL(void) -expand_right_edge (JSAMPARRAY image_data, int num_rows, - JDIMENSION input_cols, JDIMENSION output_cols) -{ - register JSAMPROW ptr; - register JSAMPLE pixval; - register int count; - int row; - int numcols = (int) (output_cols - input_cols); - - if (numcols > 0) { - for (row = 0; row < num_rows; row++) { - ptr = image_data[row] + input_cols; - pixval = ptr[-1]; /* don't need GETJSAMPLE() here */ - for (count = numcols; count > 0; count--) - *ptr++ = pixval; - } - } -} - - -/* - * Do downsampling for a whole row group (all components). - * - * In this version we simply downsample each component independently. - */ - -METHODDEF(void) -sep_downsample (j_compress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION in_row_index, - JSAMPIMAGE output_buf, JDIMENSION out_row_group_index) -{ - my_downsample_ptr downsample = (my_downsample_ptr) cinfo->downsample; - int ci; - jpeg_component_info * compptr; - JSAMPARRAY in_ptr, out_ptr; - - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - in_ptr = input_buf[ci] + in_row_index; - out_ptr = output_buf[ci] + - (out_row_group_index * downsample->rowgroup_height[ci]); - (*downsample->methods[ci]) (cinfo, compptr, in_ptr, out_ptr); - } -} - - -/* - * Downsample pixel values of a single component. - * One row group is processed per call. - * This version handles arbitrary integral sampling ratios, without smoothing. - * Note that this version is not actually used for customary sampling ratios. - */ - -METHODDEF(void) -int_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr, - JSAMPARRAY input_data, JSAMPARRAY output_data) -{ - my_downsample_ptr downsample = (my_downsample_ptr) cinfo->downsample; - int inrow, outrow, h_expand, v_expand, numpix, numpix2, h, v; - JDIMENSION outcol, outcol_h; /* outcol_h == outcol*h_expand */ - JDIMENSION output_cols = compptr->width_in_blocks * compptr->DCT_h_scaled_size; - JSAMPROW inptr, outptr; - INT32 outvalue; - - h_expand = downsample->h_expand[compptr->component_index]; - v_expand = downsample->v_expand[compptr->component_index]; - numpix = h_expand * v_expand; - numpix2 = numpix/2; - - /* Expand input data enough to let all the output samples be generated - * by the standard loop. Special-casing padded output would be more - * efficient. - */ - expand_right_edge(input_data, cinfo->max_v_samp_factor, - cinfo->image_width, output_cols * h_expand); - - inrow = outrow = 0; - while (inrow < cinfo->max_v_samp_factor) { - outptr = output_data[outrow]; - for (outcol = 0, outcol_h = 0; outcol < output_cols; - outcol++, outcol_h += h_expand) { - outvalue = 0; - for (v = 0; v < v_expand; v++) { - inptr = input_data[inrow+v] + outcol_h; - for (h = 0; h < h_expand; h++) { - outvalue += (INT32) GETJSAMPLE(*inptr++); - } - } - *outptr++ = (JSAMPLE) ((outvalue + numpix2) / numpix); - } - inrow += v_expand; - outrow++; - } -} - - -/* - * Downsample pixel values of a single component. - * This version handles the special case of a full-size component, - * without smoothing. - */ - -METHODDEF(void) -fullsize_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr, - JSAMPARRAY input_data, JSAMPARRAY output_data) -{ - /* Copy the data */ - jcopy_sample_rows(input_data, 0, output_data, 0, - cinfo->max_v_samp_factor, cinfo->image_width); - /* Edge-expand */ - expand_right_edge(output_data, cinfo->max_v_samp_factor, cinfo->image_width, - compptr->width_in_blocks * compptr->DCT_h_scaled_size); -} - - -/* - * Downsample pixel values of a single component. - * This version handles the common case of 2:1 horizontal and 1:1 vertical, - * without smoothing. - * - * A note about the "bias" calculations: when rounding fractional values to - * integer, we do not want to always round 0.5 up to the next integer. - * If we did that, we'd introduce a noticeable bias towards larger values. - * Instead, this code is arranged so that 0.5 will be rounded up or down at - * alternate pixel locations (a simple ordered dither pattern). - */ - -METHODDEF(void) -h2v1_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr, - JSAMPARRAY input_data, JSAMPARRAY output_data) -{ - int inrow; - JDIMENSION outcol; - JDIMENSION output_cols = compptr->width_in_blocks * compptr->DCT_h_scaled_size; - register JSAMPROW inptr, outptr; - register int bias; - - /* Expand input data enough to let all the output samples be generated - * by the standard loop. Special-casing padded output would be more - * efficient. - */ - expand_right_edge(input_data, cinfo->max_v_samp_factor, - cinfo->image_width, output_cols * 2); - - for (inrow = 0; inrow < cinfo->max_v_samp_factor; inrow++) { - outptr = output_data[inrow]; - inptr = input_data[inrow]; - bias = 0; /* bias = 0,1,0,1,... for successive samples */ - for (outcol = 0; outcol < output_cols; outcol++) { - *outptr++ = (JSAMPLE) ((GETJSAMPLE(*inptr) + GETJSAMPLE(inptr[1]) - + bias) >> 1); - bias ^= 1; /* 0=>1, 1=>0 */ - inptr += 2; - } - } -} - - -/* - * Downsample pixel values of a single component. - * This version handles the standard case of 2:1 horizontal and 2:1 vertical, - * without smoothing. - */ - -METHODDEF(void) -h2v2_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr, - JSAMPARRAY input_data, JSAMPARRAY output_data) -{ - int inrow, outrow; - JDIMENSION outcol; - JDIMENSION output_cols = compptr->width_in_blocks * compptr->DCT_h_scaled_size; - register JSAMPROW inptr0, inptr1, outptr; - register int bias; - - /* Expand input data enough to let all the output samples be generated - * by the standard loop. Special-casing padded output would be more - * efficient. - */ - expand_right_edge(input_data, cinfo->max_v_samp_factor, - cinfo->image_width, output_cols * 2); - - inrow = outrow = 0; - while (inrow < cinfo->max_v_samp_factor) { - outptr = output_data[outrow]; - inptr0 = input_data[inrow]; - inptr1 = input_data[inrow+1]; - bias = 1; /* bias = 1,2,1,2,... for successive samples */ - for (outcol = 0; outcol < output_cols; outcol++) { - *outptr++ = (JSAMPLE) ((GETJSAMPLE(*inptr0) + GETJSAMPLE(inptr0[1]) + - GETJSAMPLE(*inptr1) + GETJSAMPLE(inptr1[1]) - + bias) >> 2); - bias ^= 3; /* 1=>2, 2=>1 */ - inptr0 += 2; inptr1 += 2; - } - inrow += 2; - outrow++; - } -} - - -#ifdef INPUT_SMOOTHING_SUPPORTED - -/* - * Downsample pixel values of a single component. - * This version handles the standard case of 2:1 horizontal and 2:1 vertical, - * with smoothing. One row of context is required. - */ - -METHODDEF(void) -h2v2_smooth_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr, - JSAMPARRAY input_data, JSAMPARRAY output_data) -{ - int inrow, outrow; - JDIMENSION colctr; - JDIMENSION output_cols = compptr->width_in_blocks * compptr->DCT_h_scaled_size; - register JSAMPROW inptr0, inptr1, above_ptr, below_ptr, outptr; - INT32 membersum, neighsum, memberscale, neighscale; - - /* Expand input data enough to let all the output samples be generated - * by the standard loop. Special-casing padded output would be more - * efficient. - */ - expand_right_edge(input_data - 1, cinfo->max_v_samp_factor + 2, - cinfo->image_width, output_cols * 2); - - /* We don't bother to form the individual "smoothed" input pixel values; - * we can directly compute the output which is the average of the four - * smoothed values. Each of the four member pixels contributes a fraction - * (1-8*SF) to its own smoothed image and a fraction SF to each of the three - * other smoothed pixels, therefore a total fraction (1-5*SF)/4 to the final - * output. The four corner-adjacent neighbor pixels contribute a fraction - * SF to just one smoothed pixel, or SF/4 to the final output; while the - * eight edge-adjacent neighbors contribute SF to each of two smoothed - * pixels, or SF/2 overall. In order to use integer arithmetic, these - * factors are scaled by 2^16 = 65536. - * Also recall that SF = smoothing_factor / 1024. - */ - - memberscale = 16384 - cinfo->smoothing_factor * 80; /* scaled (1-5*SF)/4 */ - neighscale = cinfo->smoothing_factor * 16; /* scaled SF/4 */ - - inrow = outrow = 0; - while (inrow < cinfo->max_v_samp_factor) { - outptr = output_data[outrow]; - inptr0 = input_data[inrow]; - inptr1 = input_data[inrow+1]; - above_ptr = input_data[inrow-1]; - below_ptr = input_data[inrow+2]; - - /* Special case for first column: pretend column -1 is same as column 0 */ - membersum = GETJSAMPLE(*inptr0) + GETJSAMPLE(inptr0[1]) + - GETJSAMPLE(*inptr1) + GETJSAMPLE(inptr1[1]); - neighsum = GETJSAMPLE(*above_ptr) + GETJSAMPLE(above_ptr[1]) + - GETJSAMPLE(*below_ptr) + GETJSAMPLE(below_ptr[1]) + - GETJSAMPLE(*inptr0) + GETJSAMPLE(inptr0[2]) + - GETJSAMPLE(*inptr1) + GETJSAMPLE(inptr1[2]); - neighsum += neighsum; - neighsum += GETJSAMPLE(*above_ptr) + GETJSAMPLE(above_ptr[2]) + - GETJSAMPLE(*below_ptr) + GETJSAMPLE(below_ptr[2]); - membersum = membersum * memberscale + neighsum * neighscale; - *outptr++ = (JSAMPLE) ((membersum + 32768) >> 16); - inptr0 += 2; inptr1 += 2; above_ptr += 2; below_ptr += 2; - - for (colctr = output_cols - 2; colctr > 0; colctr--) { - /* sum of pixels directly mapped to this output element */ - membersum = GETJSAMPLE(*inptr0) + GETJSAMPLE(inptr0[1]) + - GETJSAMPLE(*inptr1) + GETJSAMPLE(inptr1[1]); - /* sum of edge-neighbor pixels */ - neighsum = GETJSAMPLE(*above_ptr) + GETJSAMPLE(above_ptr[1]) + - GETJSAMPLE(*below_ptr) + GETJSAMPLE(below_ptr[1]) + - GETJSAMPLE(inptr0[-1]) + GETJSAMPLE(inptr0[2]) + - GETJSAMPLE(inptr1[-1]) + GETJSAMPLE(inptr1[2]); - /* The edge-neighbors count twice as much as corner-neighbors */ - neighsum += neighsum; - /* Add in the corner-neighbors */ - neighsum += GETJSAMPLE(above_ptr[-1]) + GETJSAMPLE(above_ptr[2]) + - GETJSAMPLE(below_ptr[-1]) + GETJSAMPLE(below_ptr[2]); - /* form final output scaled up by 2^16 */ - membersum = membersum * memberscale + neighsum * neighscale; - /* round, descale and output it */ - *outptr++ = (JSAMPLE) ((membersum + 32768) >> 16); - inptr0 += 2; inptr1 += 2; above_ptr += 2; below_ptr += 2; - } - - /* Special case for last column */ - membersum = GETJSAMPLE(*inptr0) + GETJSAMPLE(inptr0[1]) + - GETJSAMPLE(*inptr1) + GETJSAMPLE(inptr1[1]); - neighsum = GETJSAMPLE(*above_ptr) + GETJSAMPLE(above_ptr[1]) + - GETJSAMPLE(*below_ptr) + GETJSAMPLE(below_ptr[1]) + - GETJSAMPLE(inptr0[-1]) + GETJSAMPLE(inptr0[1]) + - GETJSAMPLE(inptr1[-1]) + GETJSAMPLE(inptr1[1]); - neighsum += neighsum; - neighsum += GETJSAMPLE(above_ptr[-1]) + GETJSAMPLE(above_ptr[1]) + - GETJSAMPLE(below_ptr[-1]) + GETJSAMPLE(below_ptr[1]); - membersum = membersum * memberscale + neighsum * neighscale; - *outptr = (JSAMPLE) ((membersum + 32768) >> 16); - - inrow += 2; - outrow++; - } -} - - -/* - * Downsample pixel values of a single component. - * This version handles the special case of a full-size component, - * with smoothing. One row of context is required. - */ - -METHODDEF(void) -fullsize_smooth_downsample (j_compress_ptr cinfo, jpeg_component_info *compptr, - JSAMPARRAY input_data, JSAMPARRAY output_data) -{ - int inrow; - JDIMENSION colctr; - JDIMENSION output_cols = compptr->width_in_blocks * compptr->DCT_h_scaled_size; - register JSAMPROW inptr, above_ptr, below_ptr, outptr; - INT32 membersum, neighsum, memberscale, neighscale; - int colsum, lastcolsum, nextcolsum; - - /* Expand input data enough to let all the output samples be generated - * by the standard loop. Special-casing padded output would be more - * efficient. - */ - expand_right_edge(input_data - 1, cinfo->max_v_samp_factor + 2, - cinfo->image_width, output_cols); - - /* Each of the eight neighbor pixels contributes a fraction SF to the - * smoothed pixel, while the main pixel contributes (1-8*SF). In order - * to use integer arithmetic, these factors are multiplied by 2^16 = 65536. - * Also recall that SF = smoothing_factor / 1024. - */ - - memberscale = 65536L - cinfo->smoothing_factor * 512L; /* scaled 1-8*SF */ - neighscale = cinfo->smoothing_factor * 64; /* scaled SF */ - - for (inrow = 0; inrow < cinfo->max_v_samp_factor; inrow++) { - outptr = output_data[inrow]; - inptr = input_data[inrow]; - above_ptr = input_data[inrow-1]; - below_ptr = input_data[inrow+1]; - - /* Special case for first column */ - colsum = GETJSAMPLE(*above_ptr++) + GETJSAMPLE(*below_ptr++) + - GETJSAMPLE(*inptr); - membersum = GETJSAMPLE(*inptr++); - nextcolsum = GETJSAMPLE(*above_ptr) + GETJSAMPLE(*below_ptr) + - GETJSAMPLE(*inptr); - neighsum = colsum + (colsum - membersum) + nextcolsum; - membersum = membersum * memberscale + neighsum * neighscale; - *outptr++ = (JSAMPLE) ((membersum + 32768) >> 16); - lastcolsum = colsum; colsum = nextcolsum; - - for (colctr = output_cols - 2; colctr > 0; colctr--) { - membersum = GETJSAMPLE(*inptr++); - above_ptr++; below_ptr++; - nextcolsum = GETJSAMPLE(*above_ptr) + GETJSAMPLE(*below_ptr) + - GETJSAMPLE(*inptr); - neighsum = lastcolsum + (colsum - membersum) + nextcolsum; - membersum = membersum * memberscale + neighsum * neighscale; - *outptr++ = (JSAMPLE) ((membersum + 32768) >> 16); - lastcolsum = colsum; colsum = nextcolsum; - } - - /* Special case for last column */ - membersum = GETJSAMPLE(*inptr); - neighsum = lastcolsum + (colsum - membersum) + colsum; - membersum = membersum * memberscale + neighsum * neighscale; - *outptr = (JSAMPLE) ((membersum + 32768) >> 16); - - } -} - -#endif /* INPUT_SMOOTHING_SUPPORTED */ - - -/* - * Module initialization routine for downsampling. - * Note that we must select a routine for each component. - */ - -GLOBAL(void) -jinit_downsampler (j_compress_ptr cinfo) -{ - my_downsample_ptr downsample; - int ci; - jpeg_component_info * compptr; - boolean smoothok = TRUE; - int h_in_group, v_in_group, h_out_group, v_out_group; - - downsample = (my_downsample_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(my_downsampler)); - cinfo->downsample = (struct jpeg_downsampler *) downsample; - downsample->pub.start_pass = start_pass_downsample; - downsample->pub.downsample = sep_downsample; - downsample->pub.need_context_rows = FALSE; - - if (cinfo->CCIR601_sampling) - ERREXIT(cinfo, JERR_CCIR601_NOTIMPL); - - /* Verify we can handle the sampling factors, and set up method pointers */ - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - /* Compute size of an "output group" for DCT scaling. This many samples - * are to be converted from max_h_samp_factor * max_v_samp_factor pixels. - */ - h_out_group = (compptr->h_samp_factor * compptr->DCT_h_scaled_size) / - cinfo->min_DCT_h_scaled_size; - v_out_group = (compptr->v_samp_factor * compptr->DCT_v_scaled_size) / - cinfo->min_DCT_v_scaled_size; - h_in_group = cinfo->max_h_samp_factor; - v_in_group = cinfo->max_v_samp_factor; - downsample->rowgroup_height[ci] = v_out_group; /* save for use later */ - if (h_in_group == h_out_group && v_in_group == v_out_group) { -#ifdef INPUT_SMOOTHING_SUPPORTED - if (cinfo->smoothing_factor) { - downsample->methods[ci] = fullsize_smooth_downsample; - downsample->pub.need_context_rows = TRUE; - } else -#endif - downsample->methods[ci] = fullsize_downsample; - } else if (h_in_group == h_out_group * 2 && - v_in_group == v_out_group) { - smoothok = FALSE; - downsample->methods[ci] = h2v1_downsample; - } else if (h_in_group == h_out_group * 2 && - v_in_group == v_out_group * 2) { -#ifdef INPUT_SMOOTHING_SUPPORTED - if (cinfo->smoothing_factor) { - downsample->methods[ci] = h2v2_smooth_downsample; - downsample->pub.need_context_rows = TRUE; - } else -#endif - downsample->methods[ci] = h2v2_downsample; - } else if ((h_in_group % h_out_group) == 0 && - (v_in_group % v_out_group) == 0) { - smoothok = FALSE; - downsample->methods[ci] = int_downsample; - downsample->h_expand[ci] = (UINT8) (h_in_group / h_out_group); - downsample->v_expand[ci] = (UINT8) (v_in_group / v_out_group); - } else - ERREXIT(cinfo, JERR_FRACT_SAMPLE_NOTIMPL); - } - -#ifdef INPUT_SMOOTHING_SUPPORTED - if (cinfo->smoothing_factor && !smoothok) - TRACEMS(cinfo, 0, JTRC_SMOOTH_NOTIMPL); -#endif -} diff --git a/jpeg/jctrans.c b/jpeg/jctrans.c deleted file mode 100755 index f7d7b81..0000000 --- a/jpeg/jctrans.c +++ /dev/null @@ -1,382 +0,0 @@ -/* - * jctrans.c - * - * Copyright (C) 1995-1998, Thomas G. Lane. - * Modified 2000-2011 by Guido Vollbeding. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains library routines for transcoding compression, - * that is, writing raw DCT coefficient arrays to an output JPEG file. - * The routines in jcapimin.c will also be needed by a transcoder. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* Forward declarations */ -LOCAL(void) transencode_master_selection - JPP((j_compress_ptr cinfo, jvirt_barray_ptr * coef_arrays)); -LOCAL(void) transencode_coef_controller - JPP((j_compress_ptr cinfo, jvirt_barray_ptr * coef_arrays)); - - -/* - * Compression initialization for writing raw-coefficient data. - * Before calling this, all parameters and a data destination must be set up. - * Call jpeg_finish_compress() to actually write the data. - * - * The number of passed virtual arrays must match cinfo->num_components. - * Note that the virtual arrays need not be filled or even realized at - * the time write_coefficients is called; indeed, if the virtual arrays - * were requested from this compression object's memory manager, they - * typically will be realized during this routine and filled afterwards. - */ - -GLOBAL(void) -jpeg_write_coefficients (j_compress_ptr cinfo, jvirt_barray_ptr * coef_arrays) -{ - if (cinfo->global_state != CSTATE_START) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - /* Mark all tables to be written */ - jpeg_suppress_tables(cinfo, FALSE); - /* (Re)initialize error mgr and destination modules */ - (*cinfo->err->reset_error_mgr) ((j_common_ptr) cinfo); - (*cinfo->dest->init_destination) (cinfo); - /* Perform master selection of active modules */ - transencode_master_selection(cinfo, coef_arrays); - /* Wait for jpeg_finish_compress() call */ - cinfo->next_scanline = 0; /* so jpeg_write_marker works */ - cinfo->global_state = CSTATE_WRCOEFS; -} - - -/* - * Initialize the compression object with default parameters, - * then copy from the source object all parameters needed for lossless - * transcoding. Parameters that can be varied without loss (such as - * scan script and Huffman optimization) are left in their default states. - */ - -GLOBAL(void) -jpeg_copy_critical_parameters (j_decompress_ptr srcinfo, - j_compress_ptr dstinfo) -{ - JQUANT_TBL ** qtblptr; - jpeg_component_info *incomp, *outcomp; - JQUANT_TBL *c_quant, *slot_quant; - int tblno, ci, coefi; - - /* Safety check to ensure start_compress not called yet. */ - if (dstinfo->global_state != CSTATE_START) - ERREXIT1(dstinfo, JERR_BAD_STATE, dstinfo->global_state); - /* Copy fundamental image dimensions */ - dstinfo->image_width = srcinfo->image_width; - dstinfo->image_height = srcinfo->image_height; - dstinfo->input_components = srcinfo->num_components; - dstinfo->in_color_space = srcinfo->jpeg_color_space; - dstinfo->jpeg_width = srcinfo->output_width; - dstinfo->jpeg_height = srcinfo->output_height; - dstinfo->min_DCT_h_scaled_size = srcinfo->min_DCT_h_scaled_size; - dstinfo->min_DCT_v_scaled_size = srcinfo->min_DCT_v_scaled_size; - /* Initialize all parameters to default values */ - jpeg_set_defaults(dstinfo); - /* jpeg_set_defaults may choose wrong colorspace, eg YCbCr if input is RGB. - * Fix it to get the right header markers for the image colorspace. - */ - jpeg_set_colorspace(dstinfo, srcinfo->jpeg_color_space); - dstinfo->data_precision = srcinfo->data_precision; - dstinfo->CCIR601_sampling = srcinfo->CCIR601_sampling; - /* Copy the source's quantization tables. */ - for (tblno = 0; tblno < NUM_QUANT_TBLS; tblno++) { - if (srcinfo->quant_tbl_ptrs[tblno] != NULL) { - qtblptr = & dstinfo->quant_tbl_ptrs[tblno]; - if (*qtblptr == NULL) - *qtblptr = jpeg_alloc_quant_table((j_common_ptr) dstinfo); - MEMCOPY((*qtblptr)->quantval, - srcinfo->quant_tbl_ptrs[tblno]->quantval, - SIZEOF((*qtblptr)->quantval)); - (*qtblptr)->sent_table = FALSE; - } - } - /* Copy the source's per-component info. - * Note we assume jpeg_set_defaults has allocated the dest comp_info array. - */ - dstinfo->num_components = srcinfo->num_components; - if (dstinfo->num_components < 1 || dstinfo->num_components > MAX_COMPONENTS) - ERREXIT2(dstinfo, JERR_COMPONENT_COUNT, dstinfo->num_components, - MAX_COMPONENTS); - for (ci = 0, incomp = srcinfo->comp_info, outcomp = dstinfo->comp_info; - ci < dstinfo->num_components; ci++, incomp++, outcomp++) { - outcomp->component_id = incomp->component_id; - outcomp->h_samp_factor = incomp->h_samp_factor; - outcomp->v_samp_factor = incomp->v_samp_factor; - outcomp->quant_tbl_no = incomp->quant_tbl_no; - /* Make sure saved quantization table for component matches the qtable - * slot. If not, the input file re-used this qtable slot. - * IJG encoder currently cannot duplicate this. - */ - tblno = outcomp->quant_tbl_no; - if (tblno < 0 || tblno >= NUM_QUANT_TBLS || - srcinfo->quant_tbl_ptrs[tblno] == NULL) - ERREXIT1(dstinfo, JERR_NO_QUANT_TABLE, tblno); - slot_quant = srcinfo->quant_tbl_ptrs[tblno]; - c_quant = incomp->quant_table; - if (c_quant != NULL) { - for (coefi = 0; coefi < DCTSIZE2; coefi++) { - if (c_quant->quantval[coefi] != slot_quant->quantval[coefi]) - ERREXIT1(dstinfo, JERR_MISMATCHED_QUANT_TABLE, tblno); - } - } - /* Note: we do not copy the source's Huffman table assignments; - * instead we rely on jpeg_set_colorspace to have made a suitable choice. - */ - } - /* Also copy JFIF version and resolution information, if available. - * Strictly speaking this isn't "critical" info, but it's nearly - * always appropriate to copy it if available. In particular, - * if the application chooses to copy JFIF 1.02 extension markers from - * the source file, we need to copy the version to make sure we don't - * emit a file that has 1.02 extensions but a claimed version of 1.01. - * We will *not*, however, copy version info from mislabeled "2.01" files. - */ - if (srcinfo->saw_JFIF_marker) { - if (srcinfo->JFIF_major_version == 1) { - dstinfo->JFIF_major_version = srcinfo->JFIF_major_version; - dstinfo->JFIF_minor_version = srcinfo->JFIF_minor_version; - } - dstinfo->density_unit = srcinfo->density_unit; - dstinfo->X_density = srcinfo->X_density; - dstinfo->Y_density = srcinfo->Y_density; - } -} - - -/* - * Master selection of compression modules for transcoding. - * This substitutes for jcinit.c's initialization of the full compressor. - */ - -LOCAL(void) -transencode_master_selection (j_compress_ptr cinfo, - jvirt_barray_ptr * coef_arrays) -{ - /* Initialize master control (includes parameter checking/processing) */ - jinit_c_master_control(cinfo, TRUE /* transcode only */); - - /* Entropy encoding: either Huffman or arithmetic coding. */ - if (cinfo->arith_code) - jinit_arith_encoder(cinfo); - else { - jinit_huff_encoder(cinfo); - } - - /* We need a special coefficient buffer controller. */ - transencode_coef_controller(cinfo, coef_arrays); - - jinit_marker_writer(cinfo); - - /* We can now tell the memory manager to allocate virtual arrays. */ - (*cinfo->mem->realize_virt_arrays) ((j_common_ptr) cinfo); - - /* Write the datastream header (SOI, JFIF) immediately. - * Frame and scan headers are postponed till later. - * This lets application insert special markers after the SOI. - */ - (*cinfo->marker->write_file_header) (cinfo); -} - - -/* - * The rest of this file is a special implementation of the coefficient - * buffer controller. This is similar to jccoefct.c, but it handles only - * output from presupplied virtual arrays. Furthermore, we generate any - * dummy padding blocks on-the-fly rather than expecting them to be present - * in the arrays. - */ - -/* Private buffer controller object */ - -typedef struct { - struct jpeg_c_coef_controller pub; /* public fields */ - - JDIMENSION iMCU_row_num; /* iMCU row # within image */ - JDIMENSION mcu_ctr; /* counts MCUs processed in current row */ - int MCU_vert_offset; /* counts MCU rows within iMCU row */ - int MCU_rows_per_iMCU_row; /* number of such rows needed */ - - /* Virtual block array for each component. */ - jvirt_barray_ptr * whole_image; - - /* Workspace for constructing dummy blocks at right/bottom edges. */ - JBLOCKROW dummy_buffer[C_MAX_BLOCKS_IN_MCU]; -} my_coef_controller; - -typedef my_coef_controller * my_coef_ptr; - - -LOCAL(void) -start_iMCU_row (j_compress_ptr cinfo) -/* Reset within-iMCU-row counters for a new row */ -{ - my_coef_ptr coef = (my_coef_ptr) cinfo->coef; - - /* In an interleaved scan, an MCU row is the same as an iMCU row. - * In a noninterleaved scan, an iMCU row has v_samp_factor MCU rows. - * But at the bottom of the image, process only what's left. - */ - if (cinfo->comps_in_scan > 1) { - coef->MCU_rows_per_iMCU_row = 1; - } else { - if (coef->iMCU_row_num < (cinfo->total_iMCU_rows-1)) - coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->v_samp_factor; - else - coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->last_row_height; - } - - coef->mcu_ctr = 0; - coef->MCU_vert_offset = 0; -} - - -/* - * Initialize for a processing pass. - */ - -METHODDEF(void) -start_pass_coef (j_compress_ptr cinfo, J_BUF_MODE pass_mode) -{ - my_coef_ptr coef = (my_coef_ptr) cinfo->coef; - - if (pass_mode != JBUF_CRANK_DEST) - ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); - - coef->iMCU_row_num = 0; - start_iMCU_row(cinfo); -} - - -/* - * Process some data. - * We process the equivalent of one fully interleaved MCU row ("iMCU" row) - * per call, ie, v_samp_factor block rows for each component in the scan. - * The data is obtained from the virtual arrays and fed to the entropy coder. - * Returns TRUE if the iMCU row is completed, FALSE if suspended. - * - * NB: input_buf is ignored; it is likely to be a NULL pointer. - */ - -METHODDEF(boolean) -compress_output (j_compress_ptr cinfo, JSAMPIMAGE input_buf) -{ - my_coef_ptr coef = (my_coef_ptr) cinfo->coef; - JDIMENSION MCU_col_num; /* index of current MCU within row */ - JDIMENSION last_MCU_col = cinfo->MCUs_per_row - 1; - JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1; - int blkn, ci, xindex, yindex, yoffset, blockcnt; - JDIMENSION start_col; - JBLOCKARRAY buffer[MAX_COMPS_IN_SCAN]; - JBLOCKROW MCU_buffer[C_MAX_BLOCKS_IN_MCU]; - JBLOCKROW buffer_ptr; - jpeg_component_info *compptr; - - /* Align the virtual buffers for the components used in this scan. */ - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - compptr = cinfo->cur_comp_info[ci]; - buffer[ci] = (*cinfo->mem->access_virt_barray) - ((j_common_ptr) cinfo, coef->whole_image[compptr->component_index], - coef->iMCU_row_num * compptr->v_samp_factor, - (JDIMENSION) compptr->v_samp_factor, FALSE); - } - - /* Loop to process one whole iMCU row */ - for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row; - yoffset++) { - for (MCU_col_num = coef->mcu_ctr; MCU_col_num < cinfo->MCUs_per_row; - MCU_col_num++) { - /* Construct list of pointers to DCT blocks belonging to this MCU */ - blkn = 0; /* index of current DCT block within MCU */ - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - compptr = cinfo->cur_comp_info[ci]; - start_col = MCU_col_num * compptr->MCU_width; - blockcnt = (MCU_col_num < last_MCU_col) ? compptr->MCU_width - : compptr->last_col_width; - for (yindex = 0; yindex < compptr->MCU_height; yindex++) { - if (coef->iMCU_row_num < last_iMCU_row || - yindex+yoffset < compptr->last_row_height) { - /* Fill in pointers to real blocks in this row */ - buffer_ptr = buffer[ci][yindex+yoffset] + start_col; - for (xindex = 0; xindex < blockcnt; xindex++) - MCU_buffer[blkn++] = buffer_ptr++; - } else { - /* At bottom of image, need a whole row of dummy blocks */ - xindex = 0; - } - /* Fill in any dummy blocks needed in this row. - * Dummy blocks are filled in the same way as in jccoefct.c: - * all zeroes in the AC entries, DC entries equal to previous - * block's DC value. The init routine has already zeroed the - * AC entries, so we need only set the DC entries correctly. - */ - for (; xindex < compptr->MCU_width; xindex++) { - MCU_buffer[blkn] = coef->dummy_buffer[blkn]; - MCU_buffer[blkn][0][0] = MCU_buffer[blkn-1][0][0]; - blkn++; - } - } - } - /* Try to write the MCU. */ - if (! (*cinfo->entropy->encode_mcu) (cinfo, MCU_buffer)) { - /* Suspension forced; update state counters and exit */ - coef->MCU_vert_offset = yoffset; - coef->mcu_ctr = MCU_col_num; - return FALSE; - } - } - /* Completed an MCU row, but perhaps not an iMCU row */ - coef->mcu_ctr = 0; - } - /* Completed the iMCU row, advance counters for next one */ - coef->iMCU_row_num++; - start_iMCU_row(cinfo); - return TRUE; -} - - -/* - * Initialize coefficient buffer controller. - * - * Each passed coefficient array must be the right size for that - * coefficient: width_in_blocks wide and height_in_blocks high, - * with unitheight at least v_samp_factor. - */ - -LOCAL(void) -transencode_coef_controller (j_compress_ptr cinfo, - jvirt_barray_ptr * coef_arrays) -{ - my_coef_ptr coef; - JBLOCKROW buffer; - int i; - - coef = (my_coef_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(my_coef_controller)); - cinfo->coef = (struct jpeg_c_coef_controller *) coef; - coef->pub.start_pass = start_pass_coef; - coef->pub.compress_data = compress_output; - - /* Save pointer to virtual arrays */ - coef->whole_image = coef_arrays; - - /* Allocate and pre-zero space for dummy DCT blocks. */ - buffer = (JBLOCKROW) - (*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE, - C_MAX_BLOCKS_IN_MCU * SIZEOF(JBLOCK)); - FMEMZERO((void FAR *) buffer, C_MAX_BLOCKS_IN_MCU * SIZEOF(JBLOCK)); - for (i = 0; i < C_MAX_BLOCKS_IN_MCU; i++) { - coef->dummy_buffer[i] = buffer + i; - } -} diff --git a/jpeg/jdapimin.c b/jpeg/jdapimin.c deleted file mode 100755 index 7f1ce4c..0000000 --- a/jpeg/jdapimin.c +++ /dev/null @@ -1,396 +0,0 @@ -/* - * jdapimin.c - * - * Copyright (C) 1994-1998, Thomas G. Lane. - * Modified 2009 by Guido Vollbeding. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains application interface code for the decompression half - * of the JPEG library. These are the "minimum" API routines that may be - * needed in either the normal full-decompression case or the - * transcoding-only case. - * - * Most of the routines intended to be called directly by an application - * are in this file or in jdapistd.c. But also see jcomapi.c for routines - * shared by compression and decompression, and jdtrans.c for the transcoding - * case. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* - * Initialization of a JPEG decompression object. - * The error manager must already be set up (in case memory manager fails). - */ - -GLOBAL(void) -jpeg_CreateDecompress (j_decompress_ptr cinfo, int version, size_t structsize) -{ - int i; - - /* Guard against version mismatches between library and caller. */ - cinfo->mem = NULL; /* so jpeg_destroy knows mem mgr not called */ - if (version != JPEG_LIB_VERSION) - ERREXIT2(cinfo, JERR_BAD_LIB_VERSION, JPEG_LIB_VERSION, version); - if (structsize != SIZEOF(struct jpeg_decompress_struct)) - ERREXIT2(cinfo, JERR_BAD_STRUCT_SIZE, - (int) SIZEOF(struct jpeg_decompress_struct), (int) structsize); - - /* For debugging purposes, we zero the whole master structure. - * But the application has already set the err pointer, and may have set - * client_data, so we have to save and restore those fields. - * Note: if application hasn't set client_data, tools like Purify may - * complain here. - */ - { - struct jpeg_error_mgr * err = cinfo->err; - void * client_data = cinfo->client_data; /* ignore Purify complaint here */ - MEMZERO(cinfo, SIZEOF(struct jpeg_decompress_struct)); - cinfo->err = err; - cinfo->client_data = client_data; - } - cinfo->is_decompressor = TRUE; - - /* Initialize a memory manager instance for this object */ - jinit_memory_mgr((j_common_ptr) cinfo); - - /* Zero out pointers to permanent structures. */ - cinfo->progress = NULL; - cinfo->src = NULL; - - for (i = 0; i < NUM_QUANT_TBLS; i++) - cinfo->quant_tbl_ptrs[i] = NULL; - - for (i = 0; i < NUM_HUFF_TBLS; i++) { - cinfo->dc_huff_tbl_ptrs[i] = NULL; - cinfo->ac_huff_tbl_ptrs[i] = NULL; - } - - /* Initialize marker processor so application can override methods - * for COM, APPn markers before calling jpeg_read_header. - */ - cinfo->marker_list = NULL; - jinit_marker_reader(cinfo); - - /* And initialize the overall input controller. */ - jinit_input_controller(cinfo); - - /* OK, I'm ready */ - cinfo->global_state = DSTATE_START; -} - - -/* - * Destruction of a JPEG decompression object - */ - -GLOBAL(void) -jpeg_destroy_decompress (j_decompress_ptr cinfo) -{ - jpeg_destroy((j_common_ptr) cinfo); /* use common routine */ -} - - -/* - * Abort processing of a JPEG decompression operation, - * but don't destroy the object itself. - */ - -GLOBAL(void) -jpeg_abort_decompress (j_decompress_ptr cinfo) -{ - jpeg_abort((j_common_ptr) cinfo); /* use common routine */ -} - - -/* - * Set default decompression parameters. - */ - -LOCAL(void) -default_decompress_parms (j_decompress_ptr cinfo) -{ - /* Guess the input colorspace, and set output colorspace accordingly. */ - /* (Wish JPEG committee had provided a real way to specify this...) */ - /* Note application may override our guesses. */ - switch (cinfo->num_components) { - case 1: - cinfo->jpeg_color_space = JCS_GRAYSCALE; - cinfo->out_color_space = JCS_GRAYSCALE; - break; - - case 3: - if (cinfo->saw_JFIF_marker) { - cinfo->jpeg_color_space = JCS_YCbCr; /* JFIF implies YCbCr */ - } else if (cinfo->saw_Adobe_marker) { - switch (cinfo->Adobe_transform) { - case 0: - cinfo->jpeg_color_space = JCS_RGB; - break; - case 1: - cinfo->jpeg_color_space = JCS_YCbCr; - break; - default: - WARNMS1(cinfo, JWRN_ADOBE_XFORM, cinfo->Adobe_transform); - cinfo->jpeg_color_space = JCS_YCbCr; /* assume it's YCbCr */ - break; - } - } else { - /* Saw no special markers, try to guess from the component IDs */ - int cid0 = cinfo->comp_info[0].component_id; - int cid1 = cinfo->comp_info[1].component_id; - int cid2 = cinfo->comp_info[2].component_id; - - if (cid0 == 1 && cid1 == 2 && cid2 == 3) - cinfo->jpeg_color_space = JCS_YCbCr; /* assume JFIF w/out marker */ - else if (cid0 == 82 && cid1 == 71 && cid2 == 66) - cinfo->jpeg_color_space = JCS_RGB; /* ASCII 'R', 'G', 'B' */ - else { - TRACEMS3(cinfo, 1, JTRC_UNKNOWN_IDS, cid0, cid1, cid2); - cinfo->jpeg_color_space = JCS_YCbCr; /* assume it's YCbCr */ - } - } - /* Always guess RGB is proper output colorspace. */ - cinfo->out_color_space = JCS_RGB; - break; - - case 4: - if (cinfo->saw_Adobe_marker) { - switch (cinfo->Adobe_transform) { - case 0: - cinfo->jpeg_color_space = JCS_CMYK; - break; - case 2: - cinfo->jpeg_color_space = JCS_YCCK; - break; - default: - WARNMS1(cinfo, JWRN_ADOBE_XFORM, cinfo->Adobe_transform); - cinfo->jpeg_color_space = JCS_YCCK; /* assume it's YCCK */ - break; - } - } else { - /* No special markers, assume straight CMYK. */ - cinfo->jpeg_color_space = JCS_CMYK; - } - cinfo->out_color_space = JCS_CMYK; - break; - - default: - cinfo->jpeg_color_space = JCS_UNKNOWN; - cinfo->out_color_space = JCS_UNKNOWN; - break; - } - - /* Set defaults for other decompression parameters. */ - cinfo->scale_num = cinfo->block_size; /* 1:1 scaling */ - cinfo->scale_denom = cinfo->block_size; - cinfo->output_gamma = 1.0; - cinfo->buffered_image = FALSE; - cinfo->raw_data_out = FALSE; - cinfo->dct_method = JDCT_DEFAULT; - cinfo->do_fancy_upsampling = TRUE; - cinfo->do_block_smoothing = TRUE; - cinfo->quantize_colors = FALSE; - /* We set these in case application only sets quantize_colors. */ - cinfo->dither_mode = JDITHER_FS; -#ifdef QUANT_2PASS_SUPPORTED - cinfo->two_pass_quantize = TRUE; -#else - cinfo->two_pass_quantize = FALSE; -#endif - cinfo->desired_number_of_colors = 256; - cinfo->colormap = NULL; - /* Initialize for no mode change in buffered-image mode. */ - cinfo->enable_1pass_quant = FALSE; - cinfo->enable_external_quant = FALSE; - cinfo->enable_2pass_quant = FALSE; -} - - -/* - * Decompression startup: read start of JPEG datastream to see what's there. - * Need only initialize JPEG object and supply a data source before calling. - * - * This routine will read as far as the first SOS marker (ie, actual start of - * compressed data), and will save all tables and parameters in the JPEG - * object. It will also initialize the decompression parameters to default - * values, and finally return JPEG_HEADER_OK. On return, the application may - * adjust the decompression parameters and then call jpeg_start_decompress. - * (Or, if the application only wanted to determine the image parameters, - * the data need not be decompressed. In that case, call jpeg_abort or - * jpeg_destroy to release any temporary space.) - * If an abbreviated (tables only) datastream is presented, the routine will - * return JPEG_HEADER_TABLES_ONLY upon reaching EOI. The application may then - * re-use the JPEG object to read the abbreviated image datastream(s). - * It is unnecessary (but OK) to call jpeg_abort in this case. - * The JPEG_SUSPENDED return code only occurs if the data source module - * requests suspension of the decompressor. In this case the application - * should load more source data and then re-call jpeg_read_header to resume - * processing. - * If a non-suspending data source is used and require_image is TRUE, then the - * return code need not be inspected since only JPEG_HEADER_OK is possible. - * - * This routine is now just a front end to jpeg_consume_input, with some - * extra error checking. - */ - -GLOBAL(int) -jpeg_read_header (j_decompress_ptr cinfo, boolean require_image) -{ - int retcode; - - if (cinfo->global_state != DSTATE_START && - cinfo->global_state != DSTATE_INHEADER) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - - retcode = jpeg_consume_input(cinfo); - - switch (retcode) { - case JPEG_REACHED_SOS: - retcode = JPEG_HEADER_OK; - break; - case JPEG_REACHED_EOI: - if (require_image) /* Complain if application wanted an image */ - ERREXIT(cinfo, JERR_NO_IMAGE); - /* Reset to start state; it would be safer to require the application to - * call jpeg_abort, but we can't change it now for compatibility reasons. - * A side effect is to free any temporary memory (there shouldn't be any). - */ - jpeg_abort((j_common_ptr) cinfo); /* sets state = DSTATE_START */ - retcode = JPEG_HEADER_TABLES_ONLY; - break; - case JPEG_SUSPENDED: - /* no work */ - break; - } - - return retcode; -} - - -/* - * Consume data in advance of what the decompressor requires. - * This can be called at any time once the decompressor object has - * been created and a data source has been set up. - * - * This routine is essentially a state machine that handles a couple - * of critical state-transition actions, namely initial setup and - * transition from header scanning to ready-for-start_decompress. - * All the actual input is done via the input controller's consume_input - * method. - */ - -GLOBAL(int) -jpeg_consume_input (j_decompress_ptr cinfo) -{ - int retcode = JPEG_SUSPENDED; - - /* NB: every possible DSTATE value should be listed in this switch */ - switch (cinfo->global_state) { - case DSTATE_START: - /* Start-of-datastream actions: reset appropriate modules */ - (*cinfo->inputctl->reset_input_controller) (cinfo); - /* Initialize application's data source module */ - (*cinfo->src->init_source) (cinfo); - cinfo->global_state = DSTATE_INHEADER; - /*FALLTHROUGH*/ - case DSTATE_INHEADER: - retcode = (*cinfo->inputctl->consume_input) (cinfo); - if (retcode == JPEG_REACHED_SOS) { /* Found SOS, prepare to decompress */ - /* Set up default parameters based on header data */ - default_decompress_parms(cinfo); - /* Set global state: ready for start_decompress */ - cinfo->global_state = DSTATE_READY; - } - break; - case DSTATE_READY: - /* Can't advance past first SOS until start_decompress is called */ - retcode = JPEG_REACHED_SOS; - break; - case DSTATE_PRELOAD: - case DSTATE_PRESCAN: - case DSTATE_SCANNING: - case DSTATE_RAW_OK: - case DSTATE_BUFIMAGE: - case DSTATE_BUFPOST: - case DSTATE_STOPPING: - retcode = (*cinfo->inputctl->consume_input) (cinfo); - break; - default: - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - } - return retcode; -} - - -/* - * Have we finished reading the input file? - */ - -GLOBAL(boolean) -jpeg_input_complete (j_decompress_ptr cinfo) -{ - /* Check for valid jpeg object */ - if (cinfo->global_state < DSTATE_START || - cinfo->global_state > DSTATE_STOPPING) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - return cinfo->inputctl->eoi_reached; -} - - -/* - * Is there more than one scan? - */ - -GLOBAL(boolean) -jpeg_has_multiple_scans (j_decompress_ptr cinfo) -{ - /* Only valid after jpeg_read_header completes */ - if (cinfo->global_state < DSTATE_READY || - cinfo->global_state > DSTATE_STOPPING) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - return cinfo->inputctl->has_multiple_scans; -} - - -/* - * Finish JPEG decompression. - * - * This will normally just verify the file trailer and release temp storage. - * - * Returns FALSE if suspended. The return value need be inspected only if - * a suspending data source is used. - */ - -GLOBAL(boolean) -jpeg_finish_decompress (j_decompress_ptr cinfo) -{ - if ((cinfo->global_state == DSTATE_SCANNING || - cinfo->global_state == DSTATE_RAW_OK) && ! cinfo->buffered_image) { - /* Terminate final pass of non-buffered mode */ - if (cinfo->output_scanline < cinfo->output_height) - ERREXIT(cinfo, JERR_TOO_LITTLE_DATA); - (*cinfo->master->finish_output_pass) (cinfo); - cinfo->global_state = DSTATE_STOPPING; - } else if (cinfo->global_state == DSTATE_BUFIMAGE) { - /* Finishing after a buffered-image operation */ - cinfo->global_state = DSTATE_STOPPING; - } else if (cinfo->global_state != DSTATE_STOPPING) { - /* STOPPING = repeat call after a suspension, anything else is error */ - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - } - /* Read until EOI */ - while (! cinfo->inputctl->eoi_reached) { - if ((*cinfo->inputctl->consume_input) (cinfo) == JPEG_SUSPENDED) - return FALSE; /* Suspend, come back later */ - } - /* Do final cleanup */ - (*cinfo->src->term_source) (cinfo); - /* We can use jpeg_abort to release memory and reset global_state */ - jpeg_abort((j_common_ptr) cinfo); - return TRUE; -} diff --git a/jpeg/jdapistd.c b/jpeg/jdapistd.c deleted file mode 100755 index 9d74537..0000000 --- a/jpeg/jdapistd.c +++ /dev/null @@ -1,275 +0,0 @@ -/* - * jdapistd.c - * - * Copyright (C) 1994-1996, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains application interface code for the decompression half - * of the JPEG library. These are the "standard" API routines that are - * used in the normal full-decompression case. They are not used by a - * transcoding-only application. Note that if an application links in - * jpeg_start_decompress, it will end up linking in the entire decompressor. - * We thus must separate this file from jdapimin.c to avoid linking the - * whole decompression library into a transcoder. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* Forward declarations */ -LOCAL(boolean) output_pass_setup JPP((j_decompress_ptr cinfo)); - - -/* - * Decompression initialization. - * jpeg_read_header must be completed before calling this. - * - * If a multipass operating mode was selected, this will do all but the - * last pass, and thus may take a great deal of time. - * - * Returns FALSE if suspended. The return value need be inspected only if - * a suspending data source is used. - */ - -GLOBAL(boolean) -jpeg_start_decompress (j_decompress_ptr cinfo) -{ - if (cinfo->global_state == DSTATE_READY) { - /* First call: initialize master control, select active modules */ - jinit_master_decompress(cinfo); - if (cinfo->buffered_image) { - /* No more work here; expecting jpeg_start_output next */ - cinfo->global_state = DSTATE_BUFIMAGE; - return TRUE; - } - cinfo->global_state = DSTATE_PRELOAD; - } - if (cinfo->global_state == DSTATE_PRELOAD) { - /* If file has multiple scans, absorb them all into the coef buffer */ - if (cinfo->inputctl->has_multiple_scans) { -#ifdef D_MULTISCAN_FILES_SUPPORTED - for (;;) { - int retcode; - /* Call progress monitor hook if present */ - if (cinfo->progress != NULL) - (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo); - /* Absorb some more input */ - retcode = (*cinfo->inputctl->consume_input) (cinfo); - if (retcode == JPEG_SUSPENDED) - return FALSE; - if (retcode == JPEG_REACHED_EOI) - break; - /* Advance progress counter if appropriate */ - if (cinfo->progress != NULL && - (retcode == JPEG_ROW_COMPLETED || retcode == JPEG_REACHED_SOS)) { - if (++cinfo->progress->pass_counter >= cinfo->progress->pass_limit) { - /* jdmaster underestimated number of scans; ratchet up one scan */ - cinfo->progress->pass_limit += (long) cinfo->total_iMCU_rows; - } - } - } -#else - ERREXIT(cinfo, JERR_NOT_COMPILED); -#endif /* D_MULTISCAN_FILES_SUPPORTED */ - } - cinfo->output_scan_number = cinfo->input_scan_number; - } else if (cinfo->global_state != DSTATE_PRESCAN) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - /* Perform any dummy output passes, and set up for the final pass */ - return output_pass_setup(cinfo); -} - - -/* - * Set up for an output pass, and perform any dummy pass(es) needed. - * Common subroutine for jpeg_start_decompress and jpeg_start_output. - * Entry: global_state = DSTATE_PRESCAN only if previously suspended. - * Exit: If done, returns TRUE and sets global_state for proper output mode. - * If suspended, returns FALSE and sets global_state = DSTATE_PRESCAN. - */ - -LOCAL(boolean) -output_pass_setup (j_decompress_ptr cinfo) -{ - if (cinfo->global_state != DSTATE_PRESCAN) { - /* First call: do pass setup */ - (*cinfo->master->prepare_for_output_pass) (cinfo); - cinfo->output_scanline = 0; - cinfo->global_state = DSTATE_PRESCAN; - } - /* Loop over any required dummy passes */ - while (cinfo->master->is_dummy_pass) { -#ifdef QUANT_2PASS_SUPPORTED - /* Crank through the dummy pass */ - while (cinfo->output_scanline < cinfo->output_height) { - JDIMENSION last_scanline; - /* Call progress monitor hook if present */ - if (cinfo->progress != NULL) { - cinfo->progress->pass_counter = (long) cinfo->output_scanline; - cinfo->progress->pass_limit = (long) cinfo->output_height; - (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo); - } - /* Process some data */ - last_scanline = cinfo->output_scanline; - (*cinfo->main->process_data) (cinfo, (JSAMPARRAY) NULL, - &cinfo->output_scanline, (JDIMENSION) 0); - if (cinfo->output_scanline == last_scanline) - return FALSE; /* No progress made, must suspend */ - } - /* Finish up dummy pass, and set up for another one */ - (*cinfo->master->finish_output_pass) (cinfo); - (*cinfo->master->prepare_for_output_pass) (cinfo); - cinfo->output_scanline = 0; -#else - ERREXIT(cinfo, JERR_NOT_COMPILED); -#endif /* QUANT_2PASS_SUPPORTED */ - } - /* Ready for application to drive output pass through - * jpeg_read_scanlines or jpeg_read_raw_data. - */ - cinfo->global_state = cinfo->raw_data_out ? DSTATE_RAW_OK : DSTATE_SCANNING; - return TRUE; -} - - -/* - * Read some scanlines of data from the JPEG decompressor. - * - * The return value will be the number of lines actually read. - * This may be less than the number requested in several cases, - * including bottom of image, data source suspension, and operating - * modes that emit multiple scanlines at a time. - * - * Note: we warn about excess calls to jpeg_read_scanlines() since - * this likely signals an application programmer error. However, - * an oversize buffer (max_lines > scanlines remaining) is not an error. - */ - -GLOBAL(JDIMENSION) -jpeg_read_scanlines (j_decompress_ptr cinfo, JSAMPARRAY scanlines, - JDIMENSION max_lines) -{ - JDIMENSION row_ctr; - - if (cinfo->global_state != DSTATE_SCANNING) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - if (cinfo->output_scanline >= cinfo->output_height) { - WARNMS(cinfo, JWRN_TOO_MUCH_DATA); - return 0; - } - - /* Call progress monitor hook if present */ - if (cinfo->progress != NULL) { - cinfo->progress->pass_counter = (long) cinfo->output_scanline; - cinfo->progress->pass_limit = (long) cinfo->output_height; - (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo); - } - - /* Process some data */ - row_ctr = 0; - (*cinfo->main->process_data) (cinfo, scanlines, &row_ctr, max_lines); - cinfo->output_scanline += row_ctr; - return row_ctr; -} - - -/* - * Alternate entry point to read raw data. - * Processes exactly one iMCU row per call, unless suspended. - */ - -GLOBAL(JDIMENSION) -jpeg_read_raw_data (j_decompress_ptr cinfo, JSAMPIMAGE data, - JDIMENSION max_lines) -{ - JDIMENSION lines_per_iMCU_row; - - if (cinfo->global_state != DSTATE_RAW_OK) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - if (cinfo->output_scanline >= cinfo->output_height) { - WARNMS(cinfo, JWRN_TOO_MUCH_DATA); - return 0; - } - - /* Call progress monitor hook if present */ - if (cinfo->progress != NULL) { - cinfo->progress->pass_counter = (long) cinfo->output_scanline; - cinfo->progress->pass_limit = (long) cinfo->output_height; - (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo); - } - - /* Verify that at least one iMCU row can be returned. */ - lines_per_iMCU_row = cinfo->max_v_samp_factor * cinfo->min_DCT_v_scaled_size; - if (max_lines < lines_per_iMCU_row) - ERREXIT(cinfo, JERR_BUFFER_SIZE); - - /* Decompress directly into user's buffer. */ - if (! (*cinfo->coef->decompress_data) (cinfo, data)) - return 0; /* suspension forced, can do nothing more */ - - /* OK, we processed one iMCU row. */ - cinfo->output_scanline += lines_per_iMCU_row; - return lines_per_iMCU_row; -} - - -/* Additional entry points for buffered-image mode. */ - -#ifdef D_MULTISCAN_FILES_SUPPORTED - -/* - * Initialize for an output pass in buffered-image mode. - */ - -GLOBAL(boolean) -jpeg_start_output (j_decompress_ptr cinfo, int scan_number) -{ - if (cinfo->global_state != DSTATE_BUFIMAGE && - cinfo->global_state != DSTATE_PRESCAN) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - /* Limit scan number to valid range */ - if (scan_number <= 0) - scan_number = 1; - if (cinfo->inputctl->eoi_reached && - scan_number > cinfo->input_scan_number) - scan_number = cinfo->input_scan_number; - cinfo->output_scan_number = scan_number; - /* Perform any dummy output passes, and set up for the real pass */ - return output_pass_setup(cinfo); -} - - -/* - * Finish up after an output pass in buffered-image mode. - * - * Returns FALSE if suspended. The return value need be inspected only if - * a suspending data source is used. - */ - -GLOBAL(boolean) -jpeg_finish_output (j_decompress_ptr cinfo) -{ - if ((cinfo->global_state == DSTATE_SCANNING || - cinfo->global_state == DSTATE_RAW_OK) && cinfo->buffered_image) { - /* Terminate this pass. */ - /* We do not require the whole pass to have been completed. */ - (*cinfo->master->finish_output_pass) (cinfo); - cinfo->global_state = DSTATE_BUFPOST; - } else if (cinfo->global_state != DSTATE_BUFPOST) { - /* BUFPOST = repeat call after a suspension, anything else is error */ - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - } - /* Read markers looking for SOS or EOI */ - while (cinfo->input_scan_number <= cinfo->output_scan_number && - ! cinfo->inputctl->eoi_reached) { - if ((*cinfo->inputctl->consume_input) (cinfo) == JPEG_SUSPENDED) - return FALSE; /* Suspend, come back later */ - } - cinfo->global_state = DSTATE_BUFIMAGE; - return TRUE; -} - -#endif /* D_MULTISCAN_FILES_SUPPORTED */ diff --git a/jpeg/jdarith.c b/jpeg/jdarith.c deleted file mode 100755 index 092f8af..0000000 --- a/jpeg/jdarith.c +++ /dev/null @@ -1,776 +0,0 @@ -/* - * jdarith.c - * - * Developed 1997-2011 by Guido Vollbeding. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains portable arithmetic entropy decoding routines for JPEG - * (implementing the ISO/IEC IS 10918-1 and CCITT Recommendation ITU-T T.81). - * - * Both sequential and progressive modes are supported in this single module. - * - * Suspension is not currently supported in this module. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* Expanded entropy decoder object for arithmetic decoding. */ - -typedef struct { - struct jpeg_entropy_decoder pub; /* public fields */ - - INT32 c; /* C register, base of coding interval + input bit buffer */ - INT32 a; /* A register, normalized size of coding interval */ - int ct; /* bit shift counter, # of bits left in bit buffer part of C */ - /* init: ct = -16 */ - /* run: ct = 0..7 */ - /* error: ct = -1 */ - int last_dc_val[MAX_COMPS_IN_SCAN]; /* last DC coef for each component */ - int dc_context[MAX_COMPS_IN_SCAN]; /* context index for DC conditioning */ - - unsigned int restarts_to_go; /* MCUs left in this restart interval */ - - /* Pointers to statistics areas (these workspaces have image lifespan) */ - unsigned char * dc_stats[NUM_ARITH_TBLS]; - unsigned char * ac_stats[NUM_ARITH_TBLS]; - - /* Statistics bin for coding with fixed probability 0.5 */ - unsigned char fixed_bin[4]; -} arith_entropy_decoder; - -typedef arith_entropy_decoder * arith_entropy_ptr; - -/* The following two definitions specify the allocation chunk size - * for the statistics area. - * According to sections F.1.4.4.1.3 and F.1.4.4.2, we need at least - * 49 statistics bins for DC, and 245 statistics bins for AC coding. - * - * We use a compact representation with 1 byte per statistics bin, - * thus the numbers directly represent byte sizes. - * This 1 byte per statistics bin contains the meaning of the MPS - * (more probable symbol) in the highest bit (mask 0x80), and the - * index into the probability estimation state machine table - * in the lower bits (mask 0x7F). - */ - -#define DC_STAT_BINS 64 -#define AC_STAT_BINS 256 - - -LOCAL(int) -get_byte (j_decompress_ptr cinfo) -/* Read next input byte; we do not support suspension in this module. */ -{ - struct jpeg_source_mgr * src = cinfo->src; - - if (src->bytes_in_buffer == 0) - if (! (*src->fill_input_buffer) (cinfo)) - ERREXIT(cinfo, JERR_CANT_SUSPEND); - src->bytes_in_buffer--; - return GETJOCTET(*src->next_input_byte++); -} - - -/* - * The core arithmetic decoding routine (common in JPEG and JBIG). - * This needs to go as fast as possible. - * Machine-dependent optimization facilities - * are not utilized in this portable implementation. - * However, this code should be fairly efficient and - * may be a good base for further optimizations anyway. - * - * Return value is 0 or 1 (binary decision). - * - * Note: I've changed the handling of the code base & bit - * buffer register C compared to other implementations - * based on the standards layout & procedures. - * While it also contains both the actual base of the - * coding interval (16 bits) and the next-bits buffer, - * the cut-point between these two parts is floating - * (instead of fixed) with the bit shift counter CT. - * Thus, we also need only one (variable instead of - * fixed size) shift for the LPS/MPS decision, and - * we can get away with any renormalization update - * of C (except for new data insertion, of course). - * - * I've also introduced a new scheme for accessing - * the probability estimation state machine table, - * derived from Markus Kuhn's JBIG implementation. - */ - -LOCAL(int) -arith_decode (j_decompress_ptr cinfo, unsigned char *st) -{ - register arith_entropy_ptr e = (arith_entropy_ptr) cinfo->entropy; - register unsigned char nl, nm; - register INT32 qe, temp; - register int sv, data; - - /* Renormalization & data input per section D.2.6 */ - while (e->a < 0x8000L) { - if (--e->ct < 0) { - /* Need to fetch next data byte */ - if (cinfo->unread_marker) - data = 0; /* stuff zero data */ - else { - data = get_byte(cinfo); /* read next input byte */ - if (data == 0xFF) { /* zero stuff or marker code */ - do data = get_byte(cinfo); - while (data == 0xFF); /* swallow extra 0xFF bytes */ - if (data == 0) - data = 0xFF; /* discard stuffed zero byte */ - else { - /* Note: Different from the Huffman decoder, hitting - * a marker while processing the compressed data - * segment is legal in arithmetic coding. - * The convention is to supply zero data - * then until decoding is complete. - */ - cinfo->unread_marker = data; - data = 0; - } - } - } - e->c = (e->c << 8) | data; /* insert data into C register */ - if ((e->ct += 8) < 0) /* update bit shift counter */ - /* Need more initial bytes */ - if (++e->ct == 0) - /* Got 2 initial bytes -> re-init A and exit loop */ - e->a = 0x8000L; /* => e->a = 0x10000L after loop exit */ - } - e->a <<= 1; - } - - /* Fetch values from our compact representation of Table D.3(D.2): - * Qe values and probability estimation state machine - */ - sv = *st; - qe = jpeg_aritab[sv & 0x7F]; /* => Qe_Value */ - nl = qe & 0xFF; qe >>= 8; /* Next_Index_LPS + Switch_MPS */ - nm = qe & 0xFF; qe >>= 8; /* Next_Index_MPS */ - - /* Decode & estimation procedures per sections D.2.4 & D.2.5 */ - temp = e->a - qe; - e->a = temp; - temp <<= e->ct; - if (e->c >= temp) { - e->c -= temp; - /* Conditional LPS (less probable symbol) exchange */ - if (e->a < qe) { - e->a = qe; - *st = (sv & 0x80) ^ nm; /* Estimate_after_MPS */ - } else { - e->a = qe; - *st = (sv & 0x80) ^ nl; /* Estimate_after_LPS */ - sv ^= 0x80; /* Exchange LPS/MPS */ - } - } else if (e->a < 0x8000L) { - /* Conditional MPS (more probable symbol) exchange */ - if (e->a < qe) { - *st = (sv & 0x80) ^ nl; /* Estimate_after_LPS */ - sv ^= 0x80; /* Exchange LPS/MPS */ - } else { - *st = (sv & 0x80) ^ nm; /* Estimate_after_MPS */ - } - } - - return sv >> 7; -} - - -/* - * Check for a restart marker & resynchronize decoder. - */ - -LOCAL(void) -process_restart (j_decompress_ptr cinfo) -{ - arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy; - int ci; - jpeg_component_info * compptr; - - /* Advance past the RSTn marker */ - if (! (*cinfo->marker->read_restart_marker) (cinfo)) - ERREXIT(cinfo, JERR_CANT_SUSPEND); - - /* Re-initialize statistics areas */ - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - compptr = cinfo->cur_comp_info[ci]; - if (! cinfo->progressive_mode || (cinfo->Ss == 0 && cinfo->Ah == 0)) { - MEMZERO(entropy->dc_stats[compptr->dc_tbl_no], DC_STAT_BINS); - /* Reset DC predictions to 0 */ - entropy->last_dc_val[ci] = 0; - entropy->dc_context[ci] = 0; - } - if ((! cinfo->progressive_mode && cinfo->lim_Se) || - (cinfo->progressive_mode && cinfo->Ss)) { - MEMZERO(entropy->ac_stats[compptr->ac_tbl_no], AC_STAT_BINS); - } - } - - /* Reset arithmetic decoding variables */ - entropy->c = 0; - entropy->a = 0; - entropy->ct = -16; /* force reading 2 initial bytes to fill C */ - - /* Reset restart counter */ - entropy->restarts_to_go = cinfo->restart_interval; -} - - -/* - * Arithmetic MCU decoding. - * Each of these routines decodes and returns one MCU's worth of - * arithmetic-compressed coefficients. - * The coefficients are reordered from zigzag order into natural array order, - * but are not dequantized. - * - * The i'th block of the MCU is stored into the block pointed to by - * MCU_data[i]. WE ASSUME THIS AREA IS INITIALLY ZEROED BY THE CALLER. - */ - -/* - * MCU decoding for DC initial scan (either spectral selection, - * or first pass of successive approximation). - */ - -METHODDEF(boolean) -decode_mcu_DC_first (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) -{ - arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy; - JBLOCKROW block; - unsigned char *st; - int blkn, ci, tbl, sign; - int v, m; - - /* Process restart marker if needed */ - if (cinfo->restart_interval) { - if (entropy->restarts_to_go == 0) - process_restart(cinfo); - entropy->restarts_to_go--; - } - - if (entropy->ct == -1) return TRUE; /* if error do nothing */ - - /* Outer loop handles each block in the MCU */ - - for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { - block = MCU_data[blkn]; - ci = cinfo->MCU_membership[blkn]; - tbl = cinfo->cur_comp_info[ci]->dc_tbl_no; - - /* Sections F.2.4.1 & F.1.4.4.1: Decoding of DC coefficients */ - - /* Table F.4: Point to statistics bin S0 for DC coefficient coding */ - st = entropy->dc_stats[tbl] + entropy->dc_context[ci]; - - /* Figure F.19: Decode_DC_DIFF */ - if (arith_decode(cinfo, st) == 0) - entropy->dc_context[ci] = 0; - else { - /* Figure F.21: Decoding nonzero value v */ - /* Figure F.22: Decoding the sign of v */ - sign = arith_decode(cinfo, st + 1); - st += 2; st += sign; - /* Figure F.23: Decoding the magnitude category of v */ - if ((m = arith_decode(cinfo, st)) != 0) { - st = entropy->dc_stats[tbl] + 20; /* Table F.4: X1 = 20 */ - while (arith_decode(cinfo, st)) { - if ((m <<= 1) == 0x8000) { - WARNMS(cinfo, JWRN_ARITH_BAD_CODE); - entropy->ct = -1; /* magnitude overflow */ - return TRUE; - } - st += 1; - } - } - /* Section F.1.4.4.1.2: Establish dc_context conditioning category */ - if (m < (int) ((1L << cinfo->arith_dc_L[tbl]) >> 1)) - entropy->dc_context[ci] = 0; /* zero diff category */ - else if (m > (int) ((1L << cinfo->arith_dc_U[tbl]) >> 1)) - entropy->dc_context[ci] = 12 + (sign * 4); /* large diff category */ - else - entropy->dc_context[ci] = 4 + (sign * 4); /* small diff category */ - v = m; - /* Figure F.24: Decoding the magnitude bit pattern of v */ - st += 14; - while (m >>= 1) - if (arith_decode(cinfo, st)) v |= m; - v += 1; if (sign) v = -v; - entropy->last_dc_val[ci] += v; - } - - /* Scale and output the DC coefficient (assumes jpeg_natural_order[0]=0) */ - (*block)[0] = (JCOEF) (entropy->last_dc_val[ci] << cinfo->Al); - } - - return TRUE; -} - - -/* - * MCU decoding for AC initial scan (either spectral selection, - * or first pass of successive approximation). - */ - -METHODDEF(boolean) -decode_mcu_AC_first (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) -{ - arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy; - JBLOCKROW block; - unsigned char *st; - int tbl, sign, k; - int v, m; - const int * natural_order; - - /* Process restart marker if needed */ - if (cinfo->restart_interval) { - if (entropy->restarts_to_go == 0) - process_restart(cinfo); - entropy->restarts_to_go--; - } - - if (entropy->ct == -1) return TRUE; /* if error do nothing */ - - natural_order = cinfo->natural_order; - - /* There is always only one block per MCU */ - block = MCU_data[0]; - tbl = cinfo->cur_comp_info[0]->ac_tbl_no; - - /* Sections F.2.4.2 & F.1.4.4.2: Decoding of AC coefficients */ - - /* Figure F.20: Decode_AC_coefficients */ - for (k = cinfo->Ss; k <= cinfo->Se; k++) { - st = entropy->ac_stats[tbl] + 3 * (k - 1); - if (arith_decode(cinfo, st)) break; /* EOB flag */ - while (arith_decode(cinfo, st + 1) == 0) { - st += 3; k++; - if (k > cinfo->Se) { - WARNMS(cinfo, JWRN_ARITH_BAD_CODE); - entropy->ct = -1; /* spectral overflow */ - return TRUE; - } - } - /* Figure F.21: Decoding nonzero value v */ - /* Figure F.22: Decoding the sign of v */ - sign = arith_decode(cinfo, entropy->fixed_bin); - st += 2; - /* Figure F.23: Decoding the magnitude category of v */ - if ((m = arith_decode(cinfo, st)) != 0) { - if (arith_decode(cinfo, st)) { - m <<= 1; - st = entropy->ac_stats[tbl] + - (k <= cinfo->arith_ac_K[tbl] ? 189 : 217); - while (arith_decode(cinfo, st)) { - if ((m <<= 1) == 0x8000) { - WARNMS(cinfo, JWRN_ARITH_BAD_CODE); - entropy->ct = -1; /* magnitude overflow */ - return TRUE; - } - st += 1; - } - } - } - v = m; - /* Figure F.24: Decoding the magnitude bit pattern of v */ - st += 14; - while (m >>= 1) - if (arith_decode(cinfo, st)) v |= m; - v += 1; if (sign) v = -v; - /* Scale and output coefficient in natural (dezigzagged) order */ - (*block)[natural_order[k]] = (JCOEF) (v << cinfo->Al); - } - - return TRUE; -} - - -/* - * MCU decoding for DC successive approximation refinement scan. - */ - -METHODDEF(boolean) -decode_mcu_DC_refine (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) -{ - arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy; - unsigned char *st; - int p1, blkn; - - /* Process restart marker if needed */ - if (cinfo->restart_interval) { - if (entropy->restarts_to_go == 0) - process_restart(cinfo); - entropy->restarts_to_go--; - } - - st = entropy->fixed_bin; /* use fixed probability estimation */ - p1 = 1 << cinfo->Al; /* 1 in the bit position being coded */ - - /* Outer loop handles each block in the MCU */ - - for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { - /* Encoded data is simply the next bit of the two's-complement DC value */ - if (arith_decode(cinfo, st)) - MCU_data[blkn][0][0] |= p1; - } - - return TRUE; -} - - -/* - * MCU decoding for AC successive approximation refinement scan. - */ - -METHODDEF(boolean) -decode_mcu_AC_refine (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) -{ - arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy; - JBLOCKROW block; - JCOEFPTR thiscoef; - unsigned char *st; - int tbl, k, kex; - int p1, m1; - const int * natural_order; - - /* Process restart marker if needed */ - if (cinfo->restart_interval) { - if (entropy->restarts_to_go == 0) - process_restart(cinfo); - entropy->restarts_to_go--; - } - - if (entropy->ct == -1) return TRUE; /* if error do nothing */ - - natural_order = cinfo->natural_order; - - /* There is always only one block per MCU */ - block = MCU_data[0]; - tbl = cinfo->cur_comp_info[0]->ac_tbl_no; - - p1 = 1 << cinfo->Al; /* 1 in the bit position being coded */ - m1 = (-1) << cinfo->Al; /* -1 in the bit position being coded */ - - /* Establish EOBx (previous stage end-of-block) index */ - for (kex = cinfo->Se; kex > 0; kex--) - if ((*block)[natural_order[kex]]) break; - - for (k = cinfo->Ss; k <= cinfo->Se; k++) { - st = entropy->ac_stats[tbl] + 3 * (k - 1); - if (k > kex) - if (arith_decode(cinfo, st)) break; /* EOB flag */ - for (;;) { - thiscoef = *block + natural_order[k]; - if (*thiscoef) { /* previously nonzero coef */ - if (arith_decode(cinfo, st + 2)) { - if (*thiscoef < 0) - *thiscoef += m1; - else - *thiscoef += p1; - } - break; - } - if (arith_decode(cinfo, st + 1)) { /* newly nonzero coef */ - if (arith_decode(cinfo, entropy->fixed_bin)) - *thiscoef = m1; - else - *thiscoef = p1; - break; - } - st += 3; k++; - if (k > cinfo->Se) { - WARNMS(cinfo, JWRN_ARITH_BAD_CODE); - entropy->ct = -1; /* spectral overflow */ - return TRUE; - } - } - } - - return TRUE; -} - - -/* - * Decode one MCU's worth of arithmetic-compressed coefficients. - */ - -METHODDEF(boolean) -decode_mcu (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) -{ - arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy; - jpeg_component_info * compptr; - JBLOCKROW block; - unsigned char *st; - int blkn, ci, tbl, sign, k; - int v, m; - const int * natural_order; - - /* Process restart marker if needed */ - if (cinfo->restart_interval) { - if (entropy->restarts_to_go == 0) - process_restart(cinfo); - entropy->restarts_to_go--; - } - - if (entropy->ct == -1) return TRUE; /* if error do nothing */ - - natural_order = cinfo->natural_order; - - /* Outer loop handles each block in the MCU */ - - for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { - block = MCU_data[blkn]; - ci = cinfo->MCU_membership[blkn]; - compptr = cinfo->cur_comp_info[ci]; - - /* Sections F.2.4.1 & F.1.4.4.1: Decoding of DC coefficients */ - - tbl = compptr->dc_tbl_no; - - /* Table F.4: Point to statistics bin S0 for DC coefficient coding */ - st = entropy->dc_stats[tbl] + entropy->dc_context[ci]; - - /* Figure F.19: Decode_DC_DIFF */ - if (arith_decode(cinfo, st) == 0) - entropy->dc_context[ci] = 0; - else { - /* Figure F.21: Decoding nonzero value v */ - /* Figure F.22: Decoding the sign of v */ - sign = arith_decode(cinfo, st + 1); - st += 2; st += sign; - /* Figure F.23: Decoding the magnitude category of v */ - if ((m = arith_decode(cinfo, st)) != 0) { - st = entropy->dc_stats[tbl] + 20; /* Table F.4: X1 = 20 */ - while (arith_decode(cinfo, st)) { - if ((m <<= 1) == 0x8000) { - WARNMS(cinfo, JWRN_ARITH_BAD_CODE); - entropy->ct = -1; /* magnitude overflow */ - return TRUE; - } - st += 1; - } - } - /* Section F.1.4.4.1.2: Establish dc_context conditioning category */ - if (m < (int) ((1L << cinfo->arith_dc_L[tbl]) >> 1)) - entropy->dc_context[ci] = 0; /* zero diff category */ - else if (m > (int) ((1L << cinfo->arith_dc_U[tbl]) >> 1)) - entropy->dc_context[ci] = 12 + (sign * 4); /* large diff category */ - else - entropy->dc_context[ci] = 4 + (sign * 4); /* small diff category */ - v = m; - /* Figure F.24: Decoding the magnitude bit pattern of v */ - st += 14; - while (m >>= 1) - if (arith_decode(cinfo, st)) v |= m; - v += 1; if (sign) v = -v; - entropy->last_dc_val[ci] += v; - } - - (*block)[0] = (JCOEF) entropy->last_dc_val[ci]; - - /* Sections F.2.4.2 & F.1.4.4.2: Decoding of AC coefficients */ - - if (cinfo->lim_Se == 0) continue; - tbl = compptr->ac_tbl_no; - k = 0; - - /* Figure F.20: Decode_AC_coefficients */ - do { - st = entropy->ac_stats[tbl] + 3 * k; - if (arith_decode(cinfo, st)) break; /* EOB flag */ - for (;;) { - k++; - if (arith_decode(cinfo, st + 1)) break; - st += 3; - if (k >= cinfo->lim_Se) { - WARNMS(cinfo, JWRN_ARITH_BAD_CODE); - entropy->ct = -1; /* spectral overflow */ - return TRUE; - } - } - /* Figure F.21: Decoding nonzero value v */ - /* Figure F.22: Decoding the sign of v */ - sign = arith_decode(cinfo, entropy->fixed_bin); - st += 2; - /* Figure F.23: Decoding the magnitude category of v */ - if ((m = arith_decode(cinfo, st)) != 0) { - if (arith_decode(cinfo, st)) { - m <<= 1; - st = entropy->ac_stats[tbl] + - (k <= cinfo->arith_ac_K[tbl] ? 189 : 217); - while (arith_decode(cinfo, st)) { - if ((m <<= 1) == 0x8000) { - WARNMS(cinfo, JWRN_ARITH_BAD_CODE); - entropy->ct = -1; /* magnitude overflow */ - return TRUE; - } - st += 1; - } - } - } - v = m; - /* Figure F.24: Decoding the magnitude bit pattern of v */ - st += 14; - while (m >>= 1) - if (arith_decode(cinfo, st)) v |= m; - v += 1; if (sign) v = -v; - (*block)[natural_order[k]] = (JCOEF) v; - } while (k < cinfo->lim_Se); - } - - return TRUE; -} - - -/* - * Initialize for an arithmetic-compressed scan. - */ - -METHODDEF(void) -start_pass (j_decompress_ptr cinfo) -{ - arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy; - int ci, tbl; - jpeg_component_info * compptr; - - if (cinfo->progressive_mode) { - /* Validate progressive scan parameters */ - if (cinfo->Ss == 0) { - if (cinfo->Se != 0) - goto bad; - } else { - /* need not check Ss/Se < 0 since they came from unsigned bytes */ - if (cinfo->Se < cinfo->Ss || cinfo->Se > cinfo->lim_Se) - goto bad; - /* AC scans may have only one component */ - if (cinfo->comps_in_scan != 1) - goto bad; - } - if (cinfo->Ah != 0) { - /* Successive approximation refinement scan: must have Al = Ah-1. */ - if (cinfo->Ah-1 != cinfo->Al) - goto bad; - } - if (cinfo->Al > 13) { /* need not check for < 0 */ - bad: - ERREXIT4(cinfo, JERR_BAD_PROGRESSION, - cinfo->Ss, cinfo->Se, cinfo->Ah, cinfo->Al); - } - /* Update progression status, and verify that scan order is legal. - * Note that inter-scan inconsistencies are treated as warnings - * not fatal errors ... not clear if this is right way to behave. - */ - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - int coefi, cindex = cinfo->cur_comp_info[ci]->component_index; - int *coef_bit_ptr = & cinfo->coef_bits[cindex][0]; - if (cinfo->Ss && coef_bit_ptr[0] < 0) /* AC without prior DC scan */ - WARNMS2(cinfo, JWRN_BOGUS_PROGRESSION, cindex, 0); - for (coefi = cinfo->Ss; coefi <= cinfo->Se; coefi++) { - int expected = (coef_bit_ptr[coefi] < 0) ? 0 : coef_bit_ptr[coefi]; - if (cinfo->Ah != expected) - WARNMS2(cinfo, JWRN_BOGUS_PROGRESSION, cindex, coefi); - coef_bit_ptr[coefi] = cinfo->Al; - } - } - /* Select MCU decoding routine */ - if (cinfo->Ah == 0) { - if (cinfo->Ss == 0) - entropy->pub.decode_mcu = decode_mcu_DC_first; - else - entropy->pub.decode_mcu = decode_mcu_AC_first; - } else { - if (cinfo->Ss == 0) - entropy->pub.decode_mcu = decode_mcu_DC_refine; - else - entropy->pub.decode_mcu = decode_mcu_AC_refine; - } - } else { - /* Check that the scan parameters Ss, Se, Ah/Al are OK for sequential JPEG. - * This ought to be an error condition, but we make it a warning. - */ - if (cinfo->Ss != 0 || cinfo->Ah != 0 || cinfo->Al != 0 || - (cinfo->Se < DCTSIZE2 && cinfo->Se != cinfo->lim_Se)) - WARNMS(cinfo, JWRN_NOT_SEQUENTIAL); - /* Select MCU decoding routine */ - entropy->pub.decode_mcu = decode_mcu; - } - - /* Allocate & initialize requested statistics areas */ - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - compptr = cinfo->cur_comp_info[ci]; - if (! cinfo->progressive_mode || (cinfo->Ss == 0 && cinfo->Ah == 0)) { - tbl = compptr->dc_tbl_no; - if (tbl < 0 || tbl >= NUM_ARITH_TBLS) - ERREXIT1(cinfo, JERR_NO_ARITH_TABLE, tbl); - if (entropy->dc_stats[tbl] == NULL) - entropy->dc_stats[tbl] = (unsigned char *) (*cinfo->mem->alloc_small) - ((j_common_ptr) cinfo, JPOOL_IMAGE, DC_STAT_BINS); - MEMZERO(entropy->dc_stats[tbl], DC_STAT_BINS); - /* Initialize DC predictions to 0 */ - entropy->last_dc_val[ci] = 0; - entropy->dc_context[ci] = 0; - } - if ((! cinfo->progressive_mode && cinfo->lim_Se) || - (cinfo->progressive_mode && cinfo->Ss)) { - tbl = compptr->ac_tbl_no; - if (tbl < 0 || tbl >= NUM_ARITH_TBLS) - ERREXIT1(cinfo, JERR_NO_ARITH_TABLE, tbl); - if (entropy->ac_stats[tbl] == NULL) - entropy->ac_stats[tbl] = (unsigned char *) (*cinfo->mem->alloc_small) - ((j_common_ptr) cinfo, JPOOL_IMAGE, AC_STAT_BINS); - MEMZERO(entropy->ac_stats[tbl], AC_STAT_BINS); - } - } - - /* Initialize arithmetic decoding variables */ - entropy->c = 0; - entropy->a = 0; - entropy->ct = -16; /* force reading 2 initial bytes to fill C */ - - /* Initialize restart counter */ - entropy->restarts_to_go = cinfo->restart_interval; -} - - -/* - * Module initialization routine for arithmetic entropy decoding. - */ - -GLOBAL(void) -jinit_arith_decoder (j_decompress_ptr cinfo) -{ - arith_entropy_ptr entropy; - int i; - - entropy = (arith_entropy_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(arith_entropy_decoder)); - cinfo->entropy = (struct jpeg_entropy_decoder *) entropy; - entropy->pub.start_pass = start_pass; - - /* Mark tables unallocated */ - for (i = 0; i < NUM_ARITH_TBLS; i++) { - entropy->dc_stats[i] = NULL; - entropy->ac_stats[i] = NULL; - } - - /* Initialize index for fixed probability estimation */ - entropy->fixed_bin[0] = 113; - - if (cinfo->progressive_mode) { - /* Create progression status table */ - int *coef_bit_ptr, ci; - cinfo->coef_bits = (int (*)[DCTSIZE2]) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - cinfo->num_components*DCTSIZE2*SIZEOF(int)); - coef_bit_ptr = & cinfo->coef_bits[0][0]; - for (ci = 0; ci < cinfo->num_components; ci++) - for (i = 0; i < DCTSIZE2; i++) - *coef_bit_ptr++ = -1; - } -} diff --git a/jpeg/jdatadst.c b/jpeg/jdatadst.c deleted file mode 100755 index 6981fb7..0000000 --- a/jpeg/jdatadst.c +++ /dev/null @@ -1,267 +0,0 @@ -/* - * jdatadst.c - * - * Copyright (C) 1994-1996, Thomas G. Lane. - * Modified 2009-2012 by Guido Vollbeding. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains compression data destination routines for the case of - * emitting JPEG data to memory or to a file (or any stdio stream). - * While these routines are sufficient for most applications, - * some will want to use a different destination manager. - * IMPORTANT: we assume that fwrite() will correctly transcribe an array of - * JOCTETs into 8-bit-wide elements on external storage. If char is wider - * than 8 bits on your machine, you may need to do some tweaking. - */ - -/* this is not a core library module, so it doesn't define JPEG_INTERNALS */ -#include "jinclude.h" -#include "jpeglib.h" -#include "jerror.h" - -#ifndef HAVE_STDLIB_H /* should declare malloc(),free() */ -extern void * malloc JPP((size_t size)); -extern void free JPP((void *ptr)); -#endif - - -/* Expanded data destination object for stdio output */ - -typedef struct { - struct jpeg_destination_mgr pub; /* public fields */ - - FILE * outfile; /* target stream */ - JOCTET * buffer; /* start of buffer */ -} my_destination_mgr; - -typedef my_destination_mgr * my_dest_ptr; - -#define OUTPUT_BUF_SIZE 4096 /* choose an efficiently fwrite'able size */ - - -/* Expanded data destination object for memory output */ - -typedef struct { - struct jpeg_destination_mgr pub; /* public fields */ - - unsigned char ** outbuffer; /* target buffer */ - unsigned long * outsize; - unsigned char * newbuffer; /* newly allocated buffer */ - JOCTET * buffer; /* start of buffer */ - size_t bufsize; -} my_mem_destination_mgr; - -typedef my_mem_destination_mgr * my_mem_dest_ptr; - - -/* - * Initialize destination --- called by jpeg_start_compress - * before any data is actually written. - */ - -METHODDEF(void) -init_destination (j_compress_ptr cinfo) -{ - my_dest_ptr dest = (my_dest_ptr) cinfo->dest; - - /* Allocate the output buffer --- it will be released when done with image */ - dest->buffer = (JOCTET *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - OUTPUT_BUF_SIZE * SIZEOF(JOCTET)); - - dest->pub.next_output_byte = dest->buffer; - dest->pub.free_in_buffer = OUTPUT_BUF_SIZE; -} - -METHODDEF(void) -init_mem_destination (j_compress_ptr cinfo) -{ - /* no work necessary here */ -} - - -/* - * Empty the output buffer --- called whenever buffer fills up. - * - * In typical applications, this should write the entire output buffer - * (ignoring the current state of next_output_byte & free_in_buffer), - * reset the pointer & count to the start of the buffer, and return TRUE - * indicating that the buffer has been dumped. - * - * In applications that need to be able to suspend compression due to output - * overrun, a FALSE return indicates that the buffer cannot be emptied now. - * In this situation, the compressor will return to its caller (possibly with - * an indication that it has not accepted all the supplied scanlines). The - * application should resume compression after it has made more room in the - * output buffer. Note that there are substantial restrictions on the use of - * suspension --- see the documentation. - * - * When suspending, the compressor will back up to a convenient restart point - * (typically the start of the current MCU). next_output_byte & free_in_buffer - * indicate where the restart point will be if the current call returns FALSE. - * Data beyond this point will be regenerated after resumption, so do not - * write it out when emptying the buffer externally. - */ - -METHODDEF(boolean) -empty_output_buffer (j_compress_ptr cinfo) -{ - my_dest_ptr dest = (my_dest_ptr) cinfo->dest; - - if (JFWRITE(dest->outfile, dest->buffer, OUTPUT_BUF_SIZE) != - (size_t) OUTPUT_BUF_SIZE) - ERREXIT(cinfo, JERR_FILE_WRITE); - - dest->pub.next_output_byte = dest->buffer; - dest->pub.free_in_buffer = OUTPUT_BUF_SIZE; - - return TRUE; -} - -METHODDEF(boolean) -empty_mem_output_buffer (j_compress_ptr cinfo) -{ - size_t nextsize; - JOCTET * nextbuffer; - my_mem_dest_ptr dest = (my_mem_dest_ptr) cinfo->dest; - - /* Try to allocate new buffer with double size */ - nextsize = dest->bufsize * 2; - nextbuffer = (JOCTET *) malloc(nextsize); - - if (nextbuffer == NULL) - ERREXIT1(cinfo, JERR_OUT_OF_MEMORY, 10); - - MEMCOPY(nextbuffer, dest->buffer, dest->bufsize); - - if (dest->newbuffer != NULL) - free(dest->newbuffer); - - dest->newbuffer = nextbuffer; - - dest->pub.next_output_byte = nextbuffer + dest->bufsize; - dest->pub.free_in_buffer = dest->bufsize; - - dest->buffer = nextbuffer; - dest->bufsize = nextsize; - - return TRUE; -} - - -/* - * Terminate destination --- called by jpeg_finish_compress - * after all data has been written. Usually needs to flush buffer. - * - * NB: *not* called by jpeg_abort or jpeg_destroy; surrounding - * application must deal with any cleanup that should happen even - * for error exit. - */ - -METHODDEF(void) -term_destination (j_compress_ptr cinfo) -{ - my_dest_ptr dest = (my_dest_ptr) cinfo->dest; - size_t datacount = OUTPUT_BUF_SIZE - dest->pub.free_in_buffer; - - /* Write any data remaining in the buffer */ - if (datacount > 0) { - if (JFWRITE(dest->outfile, dest->buffer, datacount) != datacount) - ERREXIT(cinfo, JERR_FILE_WRITE); - } - fflush(dest->outfile); - /* Make sure we wrote the output file OK */ - if (ferror(dest->outfile)) - ERREXIT(cinfo, JERR_FILE_WRITE); -} - -METHODDEF(void) -term_mem_destination (j_compress_ptr cinfo) -{ - my_mem_dest_ptr dest = (my_mem_dest_ptr) cinfo->dest; - - *dest->outbuffer = dest->buffer; - *dest->outsize = dest->bufsize - dest->pub.free_in_buffer; -} - - -/* - * Prepare for output to a stdio stream. - * The caller must have already opened the stream, and is responsible - * for closing it after finishing compression. - */ - -GLOBAL(void) -jpeg_stdio_dest (j_compress_ptr cinfo, FILE * outfile) -{ - my_dest_ptr dest; - - /* The destination object is made permanent so that multiple JPEG images - * can be written to the same file without re-executing jpeg_stdio_dest. - * This makes it dangerous to use this manager and a different destination - * manager serially with the same JPEG object, because their private object - * sizes may be different. Caveat programmer. - */ - if (cinfo->dest == NULL) { /* first time for this JPEG object? */ - cinfo->dest = (struct jpeg_destination_mgr *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT, - SIZEOF(my_destination_mgr)); - } - - dest = (my_dest_ptr) cinfo->dest; - dest->pub.init_destination = init_destination; - dest->pub.empty_output_buffer = empty_output_buffer; - dest->pub.term_destination = term_destination; - dest->outfile = outfile; -} - - -/* - * Prepare for output to a memory buffer. - * The caller may supply an own initial buffer with appropriate size. - * Otherwise, or when the actual data output exceeds the given size, - * the library adapts the buffer size as necessary. - * The standard library functions malloc/free are used for allocating - * larger memory, so the buffer is available to the application after - * finishing compression, and then the application is responsible for - * freeing the requested memory. - */ - -GLOBAL(void) -jpeg_mem_dest (j_compress_ptr cinfo, - unsigned char ** outbuffer, unsigned long * outsize) -{ - my_mem_dest_ptr dest; - - if (outbuffer == NULL || outsize == NULL) /* sanity check */ - ERREXIT(cinfo, JERR_BUFFER_SIZE); - - /* The destination object is made permanent so that multiple JPEG images - * can be written to the same buffer without re-executing jpeg_mem_dest. - */ - if (cinfo->dest == NULL) { /* first time for this JPEG object? */ - cinfo->dest = (struct jpeg_destination_mgr *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT, - SIZEOF(my_mem_destination_mgr)); - } - - dest = (my_mem_dest_ptr) cinfo->dest; - dest->pub.init_destination = init_mem_destination; - dest->pub.empty_output_buffer = empty_mem_output_buffer; - dest->pub.term_destination = term_mem_destination; - dest->outbuffer = outbuffer; - dest->outsize = outsize; - dest->newbuffer = NULL; - - if (*outbuffer == NULL || *outsize == 0) { - /* Allocate initial buffer */ - dest->newbuffer = *outbuffer = (unsigned char *) malloc(OUTPUT_BUF_SIZE); - if (dest->newbuffer == NULL) - ERREXIT1(cinfo, JERR_OUT_OF_MEMORY, 10); - *outsize = OUTPUT_BUF_SIZE; - } - - dest->pub.next_output_byte = dest->buffer = *outbuffer; - dest->pub.free_in_buffer = dest->bufsize = *outsize; -} diff --git a/jpeg/jdatasrc.c b/jpeg/jdatasrc.c deleted file mode 100755 index 7be59a8..0000000 --- a/jpeg/jdatasrc.c +++ /dev/null @@ -1,275 +0,0 @@ -/* - * jdatasrc.c - * - * Copyright (C) 1994-1996, Thomas G. Lane. - * Modified 2009-2011 by Guido Vollbeding. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains decompression data source routines for the case of - * reading JPEG data from memory or from a file (or any stdio stream). - * While these routines are sufficient for most applications, - * some will want to use a different source manager. - * IMPORTANT: we assume that fread() will correctly transcribe an array of - * JOCTETs from 8-bit-wide elements on external storage. If char is wider - * than 8 bits on your machine, you may need to do some tweaking. - */ - -/* this is not a core library module, so it doesn't define JPEG_INTERNALS */ -#include "jinclude.h" -#include "jpeglib.h" -#include "jerror.h" - - -/* Expanded data source object for stdio input */ - -typedef struct { - struct jpeg_source_mgr pub; /* public fields */ - - FILE * infile; /* source stream */ - JOCTET * buffer; /* start of buffer */ - boolean start_of_file; /* have we gotten any data yet? */ -} my_source_mgr; - -typedef my_source_mgr * my_src_ptr; - -#define INPUT_BUF_SIZE 4096 /* choose an efficiently fread'able size */ - - -/* - * Initialize source --- called by jpeg_read_header - * before any data is actually read. - */ - -METHODDEF(void) -init_source (j_decompress_ptr cinfo) -{ - my_src_ptr src = (my_src_ptr) cinfo->src; - - /* We reset the empty-input-file flag for each image, - * but we don't clear the input buffer. - * This is correct behavior for reading a series of images from one source. - */ - src->start_of_file = TRUE; -} - -METHODDEF(void) -init_mem_source (j_decompress_ptr cinfo) -{ - /* no work necessary here */ -} - - -/* - * Fill the input buffer --- called whenever buffer is emptied. - * - * In typical applications, this should read fresh data into the buffer - * (ignoring the current state of next_input_byte & bytes_in_buffer), - * reset the pointer & count to the start of the buffer, and return TRUE - * indicating that the buffer has been reloaded. It is not necessary to - * fill the buffer entirely, only to obtain at least one more byte. - * - * There is no such thing as an EOF return. If the end of the file has been - * reached, the routine has a choice of ERREXIT() or inserting fake data into - * the buffer. In most cases, generating a warning message and inserting a - * fake EOI marker is the best course of action --- this will allow the - * decompressor to output however much of the image is there. However, - * the resulting error message is misleading if the real problem is an empty - * input file, so we handle that case specially. - * - * In applications that need to be able to suspend compression due to input - * not being available yet, a FALSE return indicates that no more data can be - * obtained right now, but more may be forthcoming later. In this situation, - * the decompressor will return to its caller (with an indication of the - * number of scanlines it has read, if any). The application should resume - * decompression after it has loaded more data into the input buffer. Note - * that there are substantial restrictions on the use of suspension --- see - * the documentation. - * - * When suspending, the decompressor will back up to a convenient restart point - * (typically the start of the current MCU). next_input_byte & bytes_in_buffer - * indicate where the restart point will be if the current call returns FALSE. - * Data beyond this point must be rescanned after resumption, so move it to - * the front of the buffer rather than discarding it. - */ - -METHODDEF(boolean) -fill_input_buffer (j_decompress_ptr cinfo) -{ - my_src_ptr src = (my_src_ptr) cinfo->src; - size_t nbytes; - - nbytes = JFREAD(src->infile, src->buffer, INPUT_BUF_SIZE); - - if (nbytes <= 0) { - if (src->start_of_file) /* Treat empty input file as fatal error */ - ERREXIT(cinfo, JERR_INPUT_EMPTY); - WARNMS(cinfo, JWRN_JPEG_EOF); - /* Insert a fake EOI marker */ - src->buffer[0] = (JOCTET) 0xFF; - src->buffer[1] = (JOCTET) JPEG_EOI; - nbytes = 2; - } - - src->pub.next_input_byte = src->buffer; - src->pub.bytes_in_buffer = nbytes; - src->start_of_file = FALSE; - - return TRUE; -} - -METHODDEF(boolean) -fill_mem_input_buffer (j_decompress_ptr cinfo) -{ - static const JOCTET mybuffer[4] = { - (JOCTET) 0xFF, (JOCTET) JPEG_EOI, 0, 0 - }; - - /* The whole JPEG data is expected to reside in the supplied memory - * buffer, so any request for more data beyond the given buffer size - * is treated as an error. - */ - WARNMS(cinfo, JWRN_JPEG_EOF); - - /* Insert a fake EOI marker */ - - cinfo->src->next_input_byte = mybuffer; - cinfo->src->bytes_in_buffer = 2; - - return TRUE; -} - - -/* - * Skip data --- used to skip over a potentially large amount of - * uninteresting data (such as an APPn marker). - * - * Writers of suspendable-input applications must note that skip_input_data - * is not granted the right to give a suspension return. If the skip extends - * beyond the data currently in the buffer, the buffer can be marked empty so - * that the next read will cause a fill_input_buffer call that can suspend. - * Arranging for additional bytes to be discarded before reloading the input - * buffer is the application writer's problem. - */ - -METHODDEF(void) -skip_input_data (j_decompress_ptr cinfo, long num_bytes) -{ - struct jpeg_source_mgr * src = cinfo->src; - - /* Just a dumb implementation for now. Could use fseek() except - * it doesn't work on pipes. Not clear that being smart is worth - * any trouble anyway --- large skips are infrequent. - */ - if (num_bytes > 0) { - while (num_bytes > (long) src->bytes_in_buffer) { - num_bytes -= (long) src->bytes_in_buffer; - (void) (*src->fill_input_buffer) (cinfo); - /* note we assume that fill_input_buffer will never return FALSE, - * so suspension need not be handled. - */ - } - src->next_input_byte += (size_t) num_bytes; - src->bytes_in_buffer -= (size_t) num_bytes; - } -} - - -/* - * An additional method that can be provided by data source modules is the - * resync_to_restart method for error recovery in the presence of RST markers. - * For the moment, this source module just uses the default resync method - * provided by the JPEG library. That method assumes that no backtracking - * is possible. - */ - - -/* - * Terminate source --- called by jpeg_finish_decompress - * after all data has been read. Often a no-op. - * - * NB: *not* called by jpeg_abort or jpeg_destroy; surrounding - * application must deal with any cleanup that should happen even - * for error exit. - */ - -METHODDEF(void) -term_source (j_decompress_ptr cinfo) -{ - /* no work necessary here */ -} - - -/* - * Prepare for input from a stdio stream. - * The caller must have already opened the stream, and is responsible - * for closing it after finishing decompression. - */ - -GLOBAL(void) -jpeg_stdio_src (j_decompress_ptr cinfo, FILE * infile) -{ - my_src_ptr src; - - /* The source object and input buffer are made permanent so that a series - * of JPEG images can be read from the same file by calling jpeg_stdio_src - * only before the first one. (If we discarded the buffer at the end of - * one image, we'd likely lose the start of the next one.) - * This makes it unsafe to use this manager and a different source - * manager serially with the same JPEG object. Caveat programmer. - */ - if (cinfo->src == NULL) { /* first time for this JPEG object? */ - cinfo->src = (struct jpeg_source_mgr *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT, - SIZEOF(my_source_mgr)); - src = (my_src_ptr) cinfo->src; - src->buffer = (JOCTET *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT, - INPUT_BUF_SIZE * SIZEOF(JOCTET)); - } - - src = (my_src_ptr) cinfo->src; - src->pub.init_source = init_source; - src->pub.fill_input_buffer = fill_input_buffer; - src->pub.skip_input_data = skip_input_data; - src->pub.resync_to_restart = jpeg_resync_to_restart; /* use default method */ - src->pub.term_source = term_source; - src->infile = infile; - src->pub.bytes_in_buffer = 0; /* forces fill_input_buffer on first read */ - src->pub.next_input_byte = NULL; /* until buffer loaded */ -} - - -/* - * Prepare for input from a supplied memory buffer. - * The buffer must contain the whole JPEG data. - */ - -GLOBAL(void) -jpeg_mem_src (j_decompress_ptr cinfo, - unsigned char * inbuffer, unsigned long insize) -{ - struct jpeg_source_mgr * src; - - if (inbuffer == NULL || insize == 0) /* Treat empty input as fatal error */ - ERREXIT(cinfo, JERR_INPUT_EMPTY); - - /* The source object is made permanent so that a series of JPEG images - * can be read from the same buffer by calling jpeg_mem_src only before - * the first one. - */ - if (cinfo->src == NULL) { /* first time for this JPEG object? */ - cinfo->src = (struct jpeg_source_mgr *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT, - SIZEOF(struct jpeg_source_mgr)); - } - - src = cinfo->src; - src->init_source = init_mem_source; - src->fill_input_buffer = fill_mem_input_buffer; - src->skip_input_data = skip_input_data; - src->resync_to_restart = jpeg_resync_to_restart; /* use default method */ - src->term_source = term_source; - src->bytes_in_buffer = (size_t) insize; - src->next_input_byte = (JOCTET *) inbuffer; -} diff --git a/jpeg/jdcoefct.c b/jpeg/jdcoefct.c deleted file mode 100755 index ed02fc3..0000000 --- a/jpeg/jdcoefct.c +++ /dev/null @@ -1,741 +0,0 @@ -/* - * jdcoefct.c - * - * Copyright (C) 1994-1997, Thomas G. Lane. - * Modified 2002-2011 by Guido Vollbeding. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains the coefficient buffer controller for decompression. - * This controller is the top level of the JPEG decompressor proper. - * The coefficient buffer lies between entropy decoding and inverse-DCT steps. - * - * In buffered-image mode, this controller is the interface between - * input-oriented processing and output-oriented processing. - * Also, the input side (only) is used when reading a file for transcoding. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - -/* Block smoothing is only applicable for progressive JPEG, so: */ -#ifndef D_PROGRESSIVE_SUPPORTED -#undef BLOCK_SMOOTHING_SUPPORTED -#endif - -/* Private buffer controller object */ - -typedef struct { - struct jpeg_d_coef_controller pub; /* public fields */ - - /* These variables keep track of the current location of the input side. */ - /* cinfo->input_iMCU_row is also used for this. */ - JDIMENSION MCU_ctr; /* counts MCUs processed in current row */ - int MCU_vert_offset; /* counts MCU rows within iMCU row */ - int MCU_rows_per_iMCU_row; /* number of such rows needed */ - - /* The output side's location is represented by cinfo->output_iMCU_row. */ - - /* In single-pass modes, it's sufficient to buffer just one MCU. - * We allocate a workspace of D_MAX_BLOCKS_IN_MCU coefficient blocks, - * and let the entropy decoder write into that workspace each time. - * (On 80x86, the workspace is FAR even though it's not really very big; - * this is to keep the module interfaces unchanged when a large coefficient - * buffer is necessary.) - * In multi-pass modes, this array points to the current MCU's blocks - * within the virtual arrays; it is used only by the input side. - */ - JBLOCKROW MCU_buffer[D_MAX_BLOCKS_IN_MCU]; - -#ifdef D_MULTISCAN_FILES_SUPPORTED - /* In multi-pass modes, we need a virtual block array for each component. */ - jvirt_barray_ptr whole_image[MAX_COMPONENTS]; -#endif - -#ifdef BLOCK_SMOOTHING_SUPPORTED - /* When doing block smoothing, we latch coefficient Al values here */ - int * coef_bits_latch; -#define SAVED_COEFS 6 /* we save coef_bits[0..5] */ -#endif -} my_coef_controller; - -typedef my_coef_controller * my_coef_ptr; - -/* Forward declarations */ -METHODDEF(int) decompress_onepass - JPP((j_decompress_ptr cinfo, JSAMPIMAGE output_buf)); -#ifdef D_MULTISCAN_FILES_SUPPORTED -METHODDEF(int) decompress_data - JPP((j_decompress_ptr cinfo, JSAMPIMAGE output_buf)); -#endif -#ifdef BLOCK_SMOOTHING_SUPPORTED -LOCAL(boolean) smoothing_ok JPP((j_decompress_ptr cinfo)); -METHODDEF(int) decompress_smooth_data - JPP((j_decompress_ptr cinfo, JSAMPIMAGE output_buf)); -#endif - - -LOCAL(void) -start_iMCU_row (j_decompress_ptr cinfo) -/* Reset within-iMCU-row counters for a new row (input side) */ -{ - my_coef_ptr coef = (my_coef_ptr) cinfo->coef; - - /* In an interleaved scan, an MCU row is the same as an iMCU row. - * In a noninterleaved scan, an iMCU row has v_samp_factor MCU rows. - * But at the bottom of the image, process only what's left. - */ - if (cinfo->comps_in_scan > 1) { - coef->MCU_rows_per_iMCU_row = 1; - } else { - if (cinfo->input_iMCU_row < (cinfo->total_iMCU_rows-1)) - coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->v_samp_factor; - else - coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->last_row_height; - } - - coef->MCU_ctr = 0; - coef->MCU_vert_offset = 0; -} - - -/* - * Initialize for an input processing pass. - */ - -METHODDEF(void) -start_input_pass (j_decompress_ptr cinfo) -{ - cinfo->input_iMCU_row = 0; - start_iMCU_row(cinfo); -} - - -/* - * Initialize for an output processing pass. - */ - -METHODDEF(void) -start_output_pass (j_decompress_ptr cinfo) -{ -#ifdef BLOCK_SMOOTHING_SUPPORTED - my_coef_ptr coef = (my_coef_ptr) cinfo->coef; - - /* If multipass, check to see whether to use block smoothing on this pass */ - if (coef->pub.coef_arrays != NULL) { - if (cinfo->do_block_smoothing && smoothing_ok(cinfo)) - coef->pub.decompress_data = decompress_smooth_data; - else - coef->pub.decompress_data = decompress_data; - } -#endif - cinfo->output_iMCU_row = 0; -} - - -/* - * Decompress and return some data in the single-pass case. - * Always attempts to emit one fully interleaved MCU row ("iMCU" row). - * Input and output must run in lockstep since we have only a one-MCU buffer. - * Return value is JPEG_ROW_COMPLETED, JPEG_SCAN_COMPLETED, or JPEG_SUSPENDED. - * - * NB: output_buf contains a plane for each component in image, - * which we index according to the component's SOF position. - */ - -METHODDEF(int) -decompress_onepass (j_decompress_ptr cinfo, JSAMPIMAGE output_buf) -{ - my_coef_ptr coef = (my_coef_ptr) cinfo->coef; - JDIMENSION MCU_col_num; /* index of current MCU within row */ - JDIMENSION last_MCU_col = cinfo->MCUs_per_row - 1; - JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1; - int blkn, ci, xindex, yindex, yoffset, useful_width; - JSAMPARRAY output_ptr; - JDIMENSION start_col, output_col; - jpeg_component_info *compptr; - inverse_DCT_method_ptr inverse_DCT; - - /* Loop to process as much as one whole iMCU row */ - for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row; - yoffset++) { - for (MCU_col_num = coef->MCU_ctr; MCU_col_num <= last_MCU_col; - MCU_col_num++) { - /* Try to fetch an MCU. Entropy decoder expects buffer to be zeroed. */ - if (cinfo->lim_Se) /* can bypass in DC only case */ - FMEMZERO((void FAR *) coef->MCU_buffer[0], - (size_t) (cinfo->blocks_in_MCU * SIZEOF(JBLOCK))); - if (! (*cinfo->entropy->decode_mcu) (cinfo, coef->MCU_buffer)) { - /* Suspension forced; update state counters and exit */ - coef->MCU_vert_offset = yoffset; - coef->MCU_ctr = MCU_col_num; - return JPEG_SUSPENDED; - } - /* Determine where data should go in output_buf and do the IDCT thing. - * We skip dummy blocks at the right and bottom edges (but blkn gets - * incremented past them!). Note the inner loop relies on having - * allocated the MCU_buffer[] blocks sequentially. - */ - blkn = 0; /* index of current DCT block within MCU */ - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - compptr = cinfo->cur_comp_info[ci]; - /* Don't bother to IDCT an uninteresting component. */ - if (! compptr->component_needed) { - blkn += compptr->MCU_blocks; - continue; - } - inverse_DCT = cinfo->idct->inverse_DCT[compptr->component_index]; - useful_width = (MCU_col_num < last_MCU_col) ? compptr->MCU_width - : compptr->last_col_width; - output_ptr = output_buf[compptr->component_index] + - yoffset * compptr->DCT_v_scaled_size; - start_col = MCU_col_num * compptr->MCU_sample_width; - for (yindex = 0; yindex < compptr->MCU_height; yindex++) { - if (cinfo->input_iMCU_row < last_iMCU_row || - yoffset+yindex < compptr->last_row_height) { - output_col = start_col; - for (xindex = 0; xindex < useful_width; xindex++) { - (*inverse_DCT) (cinfo, compptr, - (JCOEFPTR) coef->MCU_buffer[blkn+xindex], - output_ptr, output_col); - output_col += compptr->DCT_h_scaled_size; - } - } - blkn += compptr->MCU_width; - output_ptr += compptr->DCT_v_scaled_size; - } - } - } - /* Completed an MCU row, but perhaps not an iMCU row */ - coef->MCU_ctr = 0; - } - /* Completed the iMCU row, advance counters for next one */ - cinfo->output_iMCU_row++; - if (++(cinfo->input_iMCU_row) < cinfo->total_iMCU_rows) { - start_iMCU_row(cinfo); - return JPEG_ROW_COMPLETED; - } - /* Completed the scan */ - (*cinfo->inputctl->finish_input_pass) (cinfo); - return JPEG_SCAN_COMPLETED; -} - - -/* - * Dummy consume-input routine for single-pass operation. - */ - -METHODDEF(int) -dummy_consume_data (j_decompress_ptr cinfo) -{ - return JPEG_SUSPENDED; /* Always indicate nothing was done */ -} - - -#ifdef D_MULTISCAN_FILES_SUPPORTED - -/* - * Consume input data and store it in the full-image coefficient buffer. - * We read as much as one fully interleaved MCU row ("iMCU" row) per call, - * ie, v_samp_factor block rows for each component in the scan. - * Return value is JPEG_ROW_COMPLETED, JPEG_SCAN_COMPLETED, or JPEG_SUSPENDED. - */ - -METHODDEF(int) -consume_data (j_decompress_ptr cinfo) -{ - my_coef_ptr coef = (my_coef_ptr) cinfo->coef; - JDIMENSION MCU_col_num; /* index of current MCU within row */ - int blkn, ci, xindex, yindex, yoffset; - JDIMENSION start_col; - JBLOCKARRAY buffer[MAX_COMPS_IN_SCAN]; - JBLOCKROW buffer_ptr; - jpeg_component_info *compptr; - - /* Align the virtual buffers for the components used in this scan. */ - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - compptr = cinfo->cur_comp_info[ci]; - buffer[ci] = (*cinfo->mem->access_virt_barray) - ((j_common_ptr) cinfo, coef->whole_image[compptr->component_index], - cinfo->input_iMCU_row * compptr->v_samp_factor, - (JDIMENSION) compptr->v_samp_factor, TRUE); - /* Note: entropy decoder expects buffer to be zeroed, - * but this is handled automatically by the memory manager - * because we requested a pre-zeroed array. - */ - } - - /* Loop to process one whole iMCU row */ - for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row; - yoffset++) { - for (MCU_col_num = coef->MCU_ctr; MCU_col_num < cinfo->MCUs_per_row; - MCU_col_num++) { - /* Construct list of pointers to DCT blocks belonging to this MCU */ - blkn = 0; /* index of current DCT block within MCU */ - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - compptr = cinfo->cur_comp_info[ci]; - start_col = MCU_col_num * compptr->MCU_width; - for (yindex = 0; yindex < compptr->MCU_height; yindex++) { - buffer_ptr = buffer[ci][yindex+yoffset] + start_col; - for (xindex = 0; xindex < compptr->MCU_width; xindex++) { - coef->MCU_buffer[blkn++] = buffer_ptr++; - } - } - } - /* Try to fetch the MCU. */ - if (! (*cinfo->entropy->decode_mcu) (cinfo, coef->MCU_buffer)) { - /* Suspension forced; update state counters and exit */ - coef->MCU_vert_offset = yoffset; - coef->MCU_ctr = MCU_col_num; - return JPEG_SUSPENDED; - } - } - /* Completed an MCU row, but perhaps not an iMCU row */ - coef->MCU_ctr = 0; - } - /* Completed the iMCU row, advance counters for next one */ - if (++(cinfo->input_iMCU_row) < cinfo->total_iMCU_rows) { - start_iMCU_row(cinfo); - return JPEG_ROW_COMPLETED; - } - /* Completed the scan */ - (*cinfo->inputctl->finish_input_pass) (cinfo); - return JPEG_SCAN_COMPLETED; -} - - -/* - * Decompress and return some data in the multi-pass case. - * Always attempts to emit one fully interleaved MCU row ("iMCU" row). - * Return value is JPEG_ROW_COMPLETED, JPEG_SCAN_COMPLETED, or JPEG_SUSPENDED. - * - * NB: output_buf contains a plane for each component in image. - */ - -METHODDEF(int) -decompress_data (j_decompress_ptr cinfo, JSAMPIMAGE output_buf) -{ - my_coef_ptr coef = (my_coef_ptr) cinfo->coef; - JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1; - JDIMENSION block_num; - int ci, block_row, block_rows; - JBLOCKARRAY buffer; - JBLOCKROW buffer_ptr; - JSAMPARRAY output_ptr; - JDIMENSION output_col; - jpeg_component_info *compptr; - inverse_DCT_method_ptr inverse_DCT; - - /* Force some input to be done if we are getting ahead of the input. */ - while (cinfo->input_scan_number < cinfo->output_scan_number || - (cinfo->input_scan_number == cinfo->output_scan_number && - cinfo->input_iMCU_row <= cinfo->output_iMCU_row)) { - if ((*cinfo->inputctl->consume_input)(cinfo) == JPEG_SUSPENDED) - return JPEG_SUSPENDED; - } - - /* OK, output from the virtual arrays. */ - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - /* Don't bother to IDCT an uninteresting component. */ - if (! compptr->component_needed) - continue; - /* Align the virtual buffer for this component. */ - buffer = (*cinfo->mem->access_virt_barray) - ((j_common_ptr) cinfo, coef->whole_image[ci], - cinfo->output_iMCU_row * compptr->v_samp_factor, - (JDIMENSION) compptr->v_samp_factor, FALSE); - /* Count non-dummy DCT block rows in this iMCU row. */ - if (cinfo->output_iMCU_row < last_iMCU_row) - block_rows = compptr->v_samp_factor; - else { - /* NB: can't use last_row_height here; it is input-side-dependent! */ - block_rows = (int) (compptr->height_in_blocks % compptr->v_samp_factor); - if (block_rows == 0) block_rows = compptr->v_samp_factor; - } - inverse_DCT = cinfo->idct->inverse_DCT[ci]; - output_ptr = output_buf[ci]; - /* Loop over all DCT blocks to be processed. */ - for (block_row = 0; block_row < block_rows; block_row++) { - buffer_ptr = buffer[block_row]; - output_col = 0; - for (block_num = 0; block_num < compptr->width_in_blocks; block_num++) { - (*inverse_DCT) (cinfo, compptr, (JCOEFPTR) buffer_ptr, - output_ptr, output_col); - buffer_ptr++; - output_col += compptr->DCT_h_scaled_size; - } - output_ptr += compptr->DCT_v_scaled_size; - } - } - - if (++(cinfo->output_iMCU_row) < cinfo->total_iMCU_rows) - return JPEG_ROW_COMPLETED; - return JPEG_SCAN_COMPLETED; -} - -#endif /* D_MULTISCAN_FILES_SUPPORTED */ - - -#ifdef BLOCK_SMOOTHING_SUPPORTED - -/* - * This code applies interblock smoothing as described by section K.8 - * of the JPEG standard: the first 5 AC coefficients are estimated from - * the DC values of a DCT block and its 8 neighboring blocks. - * We apply smoothing only for progressive JPEG decoding, and only if - * the coefficients it can estimate are not yet known to full precision. - */ - -/* Natural-order array positions of the first 5 zigzag-order coefficients */ -#define Q01_POS 1 -#define Q10_POS 8 -#define Q20_POS 16 -#define Q11_POS 9 -#define Q02_POS 2 - -/* - * Determine whether block smoothing is applicable and safe. - * We also latch the current states of the coef_bits[] entries for the - * AC coefficients; otherwise, if the input side of the decompressor - * advances into a new scan, we might think the coefficients are known - * more accurately than they really are. - */ - -LOCAL(boolean) -smoothing_ok (j_decompress_ptr cinfo) -{ - my_coef_ptr coef = (my_coef_ptr) cinfo->coef; - boolean smoothing_useful = FALSE; - int ci, coefi; - jpeg_component_info *compptr; - JQUANT_TBL * qtable; - int * coef_bits; - int * coef_bits_latch; - - if (! cinfo->progressive_mode || cinfo->coef_bits == NULL) - return FALSE; - - /* Allocate latch area if not already done */ - if (coef->coef_bits_latch == NULL) - coef->coef_bits_latch = (int *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - cinfo->num_components * - (SAVED_COEFS * SIZEOF(int))); - coef_bits_latch = coef->coef_bits_latch; - - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - /* All components' quantization values must already be latched. */ - if ((qtable = compptr->quant_table) == NULL) - return FALSE; - /* Verify DC & first 5 AC quantizers are nonzero to avoid zero-divide. */ - if (qtable->quantval[0] == 0 || - qtable->quantval[Q01_POS] == 0 || - qtable->quantval[Q10_POS] == 0 || - qtable->quantval[Q20_POS] == 0 || - qtable->quantval[Q11_POS] == 0 || - qtable->quantval[Q02_POS] == 0) - return FALSE; - /* DC values must be at least partly known for all components. */ - coef_bits = cinfo->coef_bits[ci]; - if (coef_bits[0] < 0) - return FALSE; - /* Block smoothing is helpful if some AC coefficients remain inaccurate. */ - for (coefi = 1; coefi <= 5; coefi++) { - coef_bits_latch[coefi] = coef_bits[coefi]; - if (coef_bits[coefi] != 0) - smoothing_useful = TRUE; - } - coef_bits_latch += SAVED_COEFS; - } - - return smoothing_useful; -} - - -/* - * Variant of decompress_data for use when doing block smoothing. - */ - -METHODDEF(int) -decompress_smooth_data (j_decompress_ptr cinfo, JSAMPIMAGE output_buf) -{ - my_coef_ptr coef = (my_coef_ptr) cinfo->coef; - JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1; - JDIMENSION block_num, last_block_column; - int ci, block_row, block_rows, access_rows; - JBLOCKARRAY buffer; - JBLOCKROW buffer_ptr, prev_block_row, next_block_row; - JSAMPARRAY output_ptr; - JDIMENSION output_col; - jpeg_component_info *compptr; - inverse_DCT_method_ptr inverse_DCT; - boolean first_row, last_row; - JBLOCK workspace; - int *coef_bits; - JQUANT_TBL *quanttbl; - INT32 Q00,Q01,Q02,Q10,Q11,Q20, num; - int DC1,DC2,DC3,DC4,DC5,DC6,DC7,DC8,DC9; - int Al, pred; - - /* Force some input to be done if we are getting ahead of the input. */ - while (cinfo->input_scan_number <= cinfo->output_scan_number && - ! cinfo->inputctl->eoi_reached) { - if (cinfo->input_scan_number == cinfo->output_scan_number) { - /* If input is working on current scan, we ordinarily want it to - * have completed the current row. But if input scan is DC, - * we want it to keep one row ahead so that next block row's DC - * values are up to date. - */ - JDIMENSION delta = (cinfo->Ss == 0) ? 1 : 0; - if (cinfo->input_iMCU_row > cinfo->output_iMCU_row+delta) - break; - } - if ((*cinfo->inputctl->consume_input)(cinfo) == JPEG_SUSPENDED) - return JPEG_SUSPENDED; - } - - /* OK, output from the virtual arrays. */ - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - /* Don't bother to IDCT an uninteresting component. */ - if (! compptr->component_needed) - continue; - /* Count non-dummy DCT block rows in this iMCU row. */ - if (cinfo->output_iMCU_row < last_iMCU_row) { - block_rows = compptr->v_samp_factor; - access_rows = block_rows * 2; /* this and next iMCU row */ - last_row = FALSE; - } else { - /* NB: can't use last_row_height here; it is input-side-dependent! */ - block_rows = (int) (compptr->height_in_blocks % compptr->v_samp_factor); - if (block_rows == 0) block_rows = compptr->v_samp_factor; - access_rows = block_rows; /* this iMCU row only */ - last_row = TRUE; - } - /* Align the virtual buffer for this component. */ - if (cinfo->output_iMCU_row > 0) { - access_rows += compptr->v_samp_factor; /* prior iMCU row too */ - buffer = (*cinfo->mem->access_virt_barray) - ((j_common_ptr) cinfo, coef->whole_image[ci], - (cinfo->output_iMCU_row - 1) * compptr->v_samp_factor, - (JDIMENSION) access_rows, FALSE); - buffer += compptr->v_samp_factor; /* point to current iMCU row */ - first_row = FALSE; - } else { - buffer = (*cinfo->mem->access_virt_barray) - ((j_common_ptr) cinfo, coef->whole_image[ci], - (JDIMENSION) 0, (JDIMENSION) access_rows, FALSE); - first_row = TRUE; - } - /* Fetch component-dependent info */ - coef_bits = coef->coef_bits_latch + (ci * SAVED_COEFS); - quanttbl = compptr->quant_table; - Q00 = quanttbl->quantval[0]; - Q01 = quanttbl->quantval[Q01_POS]; - Q10 = quanttbl->quantval[Q10_POS]; - Q20 = quanttbl->quantval[Q20_POS]; - Q11 = quanttbl->quantval[Q11_POS]; - Q02 = quanttbl->quantval[Q02_POS]; - inverse_DCT = cinfo->idct->inverse_DCT[ci]; - output_ptr = output_buf[ci]; - /* Loop over all DCT blocks to be processed. */ - for (block_row = 0; block_row < block_rows; block_row++) { - buffer_ptr = buffer[block_row]; - if (first_row && block_row == 0) - prev_block_row = buffer_ptr; - else - prev_block_row = buffer[block_row-1]; - if (last_row && block_row == block_rows-1) - next_block_row = buffer_ptr; - else - next_block_row = buffer[block_row+1]; - /* We fetch the surrounding DC values using a sliding-register approach. - * Initialize all nine here so as to do the right thing on narrow pics. - */ - DC1 = DC2 = DC3 = (int) prev_block_row[0][0]; - DC4 = DC5 = DC6 = (int) buffer_ptr[0][0]; - DC7 = DC8 = DC9 = (int) next_block_row[0][0]; - output_col = 0; - last_block_column = compptr->width_in_blocks - 1; - for (block_num = 0; block_num <= last_block_column; block_num++) { - /* Fetch current DCT block into workspace so we can modify it. */ - jcopy_block_row(buffer_ptr, (JBLOCKROW) workspace, (JDIMENSION) 1); - /* Update DC values */ - if (block_num < last_block_column) { - DC3 = (int) prev_block_row[1][0]; - DC6 = (int) buffer_ptr[1][0]; - DC9 = (int) next_block_row[1][0]; - } - /* Compute coefficient estimates per K.8. - * An estimate is applied only if coefficient is still zero, - * and is not known to be fully accurate. - */ - /* AC01 */ - if ((Al=coef_bits[1]) != 0 && workspace[1] == 0) { - num = 36 * Q00 * (DC4 - DC6); - if (num >= 0) { - pred = (int) (((Q01<<7) + num) / (Q01<<8)); - if (Al > 0 && pred >= (1< 0 && pred >= (1<= 0) { - pred = (int) (((Q10<<7) + num) / (Q10<<8)); - if (Al > 0 && pred >= (1< 0 && pred >= (1<= 0) { - pred = (int) (((Q20<<7) + num) / (Q20<<8)); - if (Al > 0 && pred >= (1< 0 && pred >= (1<= 0) { - pred = (int) (((Q11<<7) + num) / (Q11<<8)); - if (Al > 0 && pred >= (1< 0 && pred >= (1<= 0) { - pred = (int) (((Q02<<7) + num) / (Q02<<8)); - if (Al > 0 && pred >= (1< 0 && pred >= (1<DCT_h_scaled_size; - } - output_ptr += compptr->DCT_v_scaled_size; - } - } - - if (++(cinfo->output_iMCU_row) < cinfo->total_iMCU_rows) - return JPEG_ROW_COMPLETED; - return JPEG_SCAN_COMPLETED; -} - -#endif /* BLOCK_SMOOTHING_SUPPORTED */ - - -/* - * Initialize coefficient buffer controller. - */ - -GLOBAL(void) -jinit_d_coef_controller (j_decompress_ptr cinfo, boolean need_full_buffer) -{ - my_coef_ptr coef; - - coef = (my_coef_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(my_coef_controller)); - cinfo->coef = (struct jpeg_d_coef_controller *) coef; - coef->pub.start_input_pass = start_input_pass; - coef->pub.start_output_pass = start_output_pass; -#ifdef BLOCK_SMOOTHING_SUPPORTED - coef->coef_bits_latch = NULL; -#endif - - /* Create the coefficient buffer. */ - if (need_full_buffer) { -#ifdef D_MULTISCAN_FILES_SUPPORTED - /* Allocate a full-image virtual array for each component, */ - /* padded to a multiple of samp_factor DCT blocks in each direction. */ - /* Note we ask for a pre-zeroed array. */ - int ci, access_rows; - jpeg_component_info *compptr; - - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - access_rows = compptr->v_samp_factor; -#ifdef BLOCK_SMOOTHING_SUPPORTED - /* If block smoothing could be used, need a bigger window */ - if (cinfo->progressive_mode) - access_rows *= 3; -#endif - coef->whole_image[ci] = (*cinfo->mem->request_virt_barray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, TRUE, - (JDIMENSION) jround_up((long) compptr->width_in_blocks, - (long) compptr->h_samp_factor), - (JDIMENSION) jround_up((long) compptr->height_in_blocks, - (long) compptr->v_samp_factor), - (JDIMENSION) access_rows); - } - coef->pub.consume_data = consume_data; - coef->pub.decompress_data = decompress_data; - coef->pub.coef_arrays = coef->whole_image; /* link to virtual arrays */ -#else - ERREXIT(cinfo, JERR_NOT_COMPILED); -#endif - } else { - /* We only need a single-MCU buffer. */ - JBLOCKROW buffer; - int i; - - buffer = (JBLOCKROW) - (*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE, - D_MAX_BLOCKS_IN_MCU * SIZEOF(JBLOCK)); - for (i = 0; i < D_MAX_BLOCKS_IN_MCU; i++) { - coef->MCU_buffer[i] = buffer + i; - } - if (cinfo->lim_Se == 0) /* DC only case: want to bypass later */ - FMEMZERO((void FAR *) buffer, - (size_t) (D_MAX_BLOCKS_IN_MCU * SIZEOF(JBLOCK))); - coef->pub.consume_data = dummy_consume_data; - coef->pub.decompress_data = decompress_onepass; - coef->pub.coef_arrays = NULL; /* flag for no virtual arrays */ - } -} diff --git a/jpeg/jdcolor.c b/jpeg/jdcolor.c deleted file mode 100755 index 83e4d06..0000000 --- a/jpeg/jdcolor.c +++ /dev/null @@ -1,512 +0,0 @@ -/* - * jdcolor.c - * - * Copyright (C) 1991-1997, Thomas G. Lane. - * Modified 2011 by Guido Vollbeding. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains output colorspace conversion routines. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* Private subobject */ - -typedef struct { - struct jpeg_color_deconverter pub; /* public fields */ - - /* Private state for YCC->RGB conversion */ - int * Cr_r_tab; /* => table for Cr to R conversion */ - int * Cb_b_tab; /* => table for Cb to B conversion */ - INT32 * Cr_g_tab; /* => table for Cr to G conversion */ - INT32 * Cb_g_tab; /* => table for Cb to G conversion */ - - /* Private state for RGB->Y conversion */ - INT32 * rgb_y_tab; /* => table for RGB to Y conversion */ -} my_color_deconverter; - -typedef my_color_deconverter * my_cconvert_ptr; - - -/**************** YCbCr -> RGB conversion: most common case **************/ -/**************** RGB -> Y conversion: less common case **************/ - -/* - * YCbCr is defined per CCIR 601-1, except that Cb and Cr are - * normalized to the range 0..MAXJSAMPLE rather than -0.5 .. 0.5. - * The conversion equations to be implemented are therefore - * - * R = Y + 1.40200 * Cr - * G = Y - 0.34414 * Cb - 0.71414 * Cr - * B = Y + 1.77200 * Cb - * - * Y = 0.29900 * R + 0.58700 * G + 0.11400 * B - * - * where Cb and Cr represent the incoming values less CENTERJSAMPLE. - * (These numbers are derived from TIFF 6.0 section 21, dated 3-June-92.) - * - * To avoid floating-point arithmetic, we represent the fractional constants - * as integers scaled up by 2^16 (about 4 digits precision); we have to divide - * the products by 2^16, with appropriate rounding, to get the correct answer. - * Notice that Y, being an integral input, does not contribute any fraction - * so it need not participate in the rounding. - * - * For even more speed, we avoid doing any multiplications in the inner loop - * by precalculating the constants times Cb and Cr for all possible values. - * For 8-bit JSAMPLEs this is very reasonable (only 256 entries per table); - * for 12-bit samples it is still acceptable. It's not very reasonable for - * 16-bit samples, but if you want lossless storage you shouldn't be changing - * colorspace anyway. - * The Cr=>R and Cb=>B values can be rounded to integers in advance; the - * values for the G calculation are left scaled up, since we must add them - * together before rounding. - */ - -#define SCALEBITS 16 /* speediest right-shift on some machines */ -#define ONE_HALF ((INT32) 1 << (SCALEBITS-1)) -#define FIX(x) ((INT32) ((x) * (1L<Y conversion and divide it up into - * three parts, instead of doing three alloc_small requests. This lets us - * use a single table base address, which can be held in a register in the - * inner loops on many machines (more than can hold all three addresses, - * anyway). - */ - -#define R_Y_OFF 0 /* offset to R => Y section */ -#define G_Y_OFF (1*(MAXJSAMPLE+1)) /* offset to G => Y section */ -#define B_Y_OFF (2*(MAXJSAMPLE+1)) /* etc. */ -#define TABLE_SIZE (3*(MAXJSAMPLE+1)) - - -/* - * Initialize tables for YCC->RGB colorspace conversion. - */ - -LOCAL(void) -build_ycc_rgb_table (j_decompress_ptr cinfo) -{ - my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; - int i; - INT32 x; - SHIFT_TEMPS - - cconvert->Cr_r_tab = (int *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - (MAXJSAMPLE+1) * SIZEOF(int)); - cconvert->Cb_b_tab = (int *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - (MAXJSAMPLE+1) * SIZEOF(int)); - cconvert->Cr_g_tab = (INT32 *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - (MAXJSAMPLE+1) * SIZEOF(INT32)); - cconvert->Cb_g_tab = (INT32 *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - (MAXJSAMPLE+1) * SIZEOF(INT32)); - - for (i = 0, x = -CENTERJSAMPLE; i <= MAXJSAMPLE; i++, x++) { - /* i is the actual input pixel value, in the range 0..MAXJSAMPLE */ - /* The Cb or Cr value we are thinking of is x = i - CENTERJSAMPLE */ - /* Cr=>R value is nearest int to 1.40200 * x */ - cconvert->Cr_r_tab[i] = (int) - RIGHT_SHIFT(FIX(1.40200) * x + ONE_HALF, SCALEBITS); - /* Cb=>B value is nearest int to 1.77200 * x */ - cconvert->Cb_b_tab[i] = (int) - RIGHT_SHIFT(FIX(1.77200) * x + ONE_HALF, SCALEBITS); - /* Cr=>G value is scaled-up -0.71414 * x */ - cconvert->Cr_g_tab[i] = (- FIX(0.71414)) * x; - /* Cb=>G value is scaled-up -0.34414 * x */ - /* We also add in ONE_HALF so that need not do it in inner loop */ - cconvert->Cb_g_tab[i] = (- FIX(0.34414)) * x + ONE_HALF; - } -} - - -/* - * Convert some rows of samples to the output colorspace. - * - * Note that we change from noninterleaved, one-plane-per-component format - * to interleaved-pixel format. The output buffer is therefore three times - * as wide as the input buffer. - * A starting row offset is provided only for the input buffer. The caller - * can easily adjust the passed output_buf value to accommodate any row - * offset required on that side. - */ - -METHODDEF(void) -ycc_rgb_convert (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION input_row, - JSAMPARRAY output_buf, int num_rows) -{ - my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; - register int y, cb, cr; - register JSAMPROW outptr; - register JSAMPROW inptr0, inptr1, inptr2; - register JDIMENSION col; - JDIMENSION num_cols = cinfo->output_width; - /* copy these pointers into registers if possible */ - register JSAMPLE * range_limit = cinfo->sample_range_limit; - register int * Crrtab = cconvert->Cr_r_tab; - register int * Cbbtab = cconvert->Cb_b_tab; - register INT32 * Crgtab = cconvert->Cr_g_tab; - register INT32 * Cbgtab = cconvert->Cb_g_tab; - SHIFT_TEMPS - - while (--num_rows >= 0) { - inptr0 = input_buf[0][input_row]; - inptr1 = input_buf[1][input_row]; - inptr2 = input_buf[2][input_row]; - input_row++; - outptr = *output_buf++; - for (col = 0; col < num_cols; col++) { - y = GETJSAMPLE(inptr0[col]); - cb = GETJSAMPLE(inptr1[col]); - cr = GETJSAMPLE(inptr2[col]); - /* Range-limiting is essential due to noise introduced by DCT losses. */ - outptr[RGB_RED] = range_limit[y + Crrtab[cr]]; - outptr[RGB_GREEN] = range_limit[y + - ((int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], - SCALEBITS))]; - outptr[RGB_BLUE] = range_limit[y + Cbbtab[cb]]; - outptr += RGB_PIXELSIZE; - } - } -} - - -/**************** Cases other than YCbCr -> RGB **************/ - - -/* - * Initialize for RGB->grayscale colorspace conversion. - */ - -LOCAL(void) -build_rgb_y_table (j_decompress_ptr cinfo) -{ - my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; - INT32 * rgb_y_tab; - INT32 i; - - /* Allocate and fill in the conversion tables. */ - cconvert->rgb_y_tab = rgb_y_tab = (INT32 *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - (TABLE_SIZE * SIZEOF(INT32))); - - for (i = 0; i <= MAXJSAMPLE; i++) { - rgb_y_tab[i+R_Y_OFF] = FIX(0.29900) * i; - rgb_y_tab[i+G_Y_OFF] = FIX(0.58700) * i; - rgb_y_tab[i+B_Y_OFF] = FIX(0.11400) * i + ONE_HALF; - } -} - - -/* - * Convert RGB to grayscale. - */ - -METHODDEF(void) -rgb_gray_convert (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION input_row, - JSAMPARRAY output_buf, int num_rows) -{ - my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; - register int r, g, b; - register INT32 * ctab = cconvert->rgb_y_tab; - register JSAMPROW outptr; - register JSAMPROW inptr0, inptr1, inptr2; - register JDIMENSION col; - JDIMENSION num_cols = cinfo->output_width; - - while (--num_rows >= 0) { - inptr0 = input_buf[0][input_row]; - inptr1 = input_buf[1][input_row]; - inptr2 = input_buf[2][input_row]; - input_row++; - outptr = *output_buf++; - for (col = 0; col < num_cols; col++) { - r = GETJSAMPLE(inptr0[col]); - g = GETJSAMPLE(inptr1[col]); - b = GETJSAMPLE(inptr2[col]); - /* Y */ - outptr[col] = (JSAMPLE) - ((ctab[r+R_Y_OFF] + ctab[g+G_Y_OFF] + ctab[b+B_Y_OFF]) - >> SCALEBITS); - } - } -} - - -/* - * No colorspace change, but conversion from separate-planes - * to interleaved representation. - */ - -METHODDEF(void) -rgb_convert (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION input_row, - JSAMPARRAY output_buf, int num_rows) -{ - register JSAMPROW outptr; - register JSAMPROW inptr0, inptr1, inptr2; - register JDIMENSION col; - JDIMENSION num_cols = cinfo->output_width; - - while (--num_rows >= 0) { - inptr0 = input_buf[0][input_row]; - inptr1 = input_buf[1][input_row]; - inptr2 = input_buf[2][input_row]; - input_row++; - outptr = *output_buf++; - for (col = 0; col < num_cols; col++) { - /* We can dispense with GETJSAMPLE() here */ - outptr[RGB_RED] = inptr0[col]; - outptr[RGB_GREEN] = inptr1[col]; - outptr[RGB_BLUE] = inptr2[col]; - outptr += RGB_PIXELSIZE; - } - } -} - - -/* - * Color conversion for no colorspace change: just copy the data, - * converting from separate-planes to interleaved representation. - */ - -METHODDEF(void) -null_convert (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION input_row, - JSAMPARRAY output_buf, int num_rows) -{ - register JSAMPROW inptr, outptr; - register JDIMENSION count; - register int num_components = cinfo->num_components; - JDIMENSION num_cols = cinfo->output_width; - int ci; - - while (--num_rows >= 0) { - for (ci = 0; ci < num_components; ci++) { - inptr = input_buf[ci][input_row]; - outptr = output_buf[0] + ci; - for (count = num_cols; count > 0; count--) { - *outptr = *inptr++; /* needn't bother with GETJSAMPLE() here */ - outptr += num_components; - } - } - input_row++; - output_buf++; - } -} - - -/* - * Color conversion for grayscale: just copy the data. - * This also works for YCbCr -> grayscale conversion, in which - * we just copy the Y (luminance) component and ignore chrominance. - */ - -METHODDEF(void) -grayscale_convert (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION input_row, - JSAMPARRAY output_buf, int num_rows) -{ - jcopy_sample_rows(input_buf[0], (int) input_row, output_buf, 0, - num_rows, cinfo->output_width); -} - - -/* - * Convert grayscale to RGB: just duplicate the graylevel three times. - * This is provided to support applications that don't want to cope - * with grayscale as a separate case. - */ - -METHODDEF(void) -gray_rgb_convert (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION input_row, - JSAMPARRAY output_buf, int num_rows) -{ - register JSAMPROW inptr, outptr; - register JDIMENSION col; - JDIMENSION num_cols = cinfo->output_width; - - while (--num_rows >= 0) { - inptr = input_buf[0][input_row++]; - outptr = *output_buf++; - for (col = 0; col < num_cols; col++) { - /* We can dispense with GETJSAMPLE() here */ - outptr[RGB_RED] = outptr[RGB_GREEN] = outptr[RGB_BLUE] = inptr[col]; - outptr += RGB_PIXELSIZE; - } - } -} - - -/* - * Adobe-style YCCK->CMYK conversion. - * We convert YCbCr to R=1-C, G=1-M, and B=1-Y using the same - * conversion as above, while passing K (black) unchanged. - * We assume build_ycc_rgb_table has been called. - */ - -METHODDEF(void) -ycck_cmyk_convert (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION input_row, - JSAMPARRAY output_buf, int num_rows) -{ - my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; - register int y, cb, cr; - register JSAMPROW outptr; - register JSAMPROW inptr0, inptr1, inptr2, inptr3; - register JDIMENSION col; - JDIMENSION num_cols = cinfo->output_width; - /* copy these pointers into registers if possible */ - register JSAMPLE * range_limit = cinfo->sample_range_limit; - register int * Crrtab = cconvert->Cr_r_tab; - register int * Cbbtab = cconvert->Cb_b_tab; - register INT32 * Crgtab = cconvert->Cr_g_tab; - register INT32 * Cbgtab = cconvert->Cb_g_tab; - SHIFT_TEMPS - - while (--num_rows >= 0) { - inptr0 = input_buf[0][input_row]; - inptr1 = input_buf[1][input_row]; - inptr2 = input_buf[2][input_row]; - inptr3 = input_buf[3][input_row]; - input_row++; - outptr = *output_buf++; - for (col = 0; col < num_cols; col++) { - y = GETJSAMPLE(inptr0[col]); - cb = GETJSAMPLE(inptr1[col]); - cr = GETJSAMPLE(inptr2[col]); - /* Range-limiting is essential due to noise introduced by DCT losses. */ - outptr[0] = range_limit[MAXJSAMPLE - (y + Crrtab[cr])]; /* red */ - outptr[1] = range_limit[MAXJSAMPLE - (y + /* green */ - ((int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], - SCALEBITS)))]; - outptr[2] = range_limit[MAXJSAMPLE - (y + Cbbtab[cb])]; /* blue */ - /* K passes through unchanged */ - outptr[3] = inptr3[col]; /* don't need GETJSAMPLE here */ - outptr += 4; - } - } -} - - -/* - * Empty method for start_pass. - */ - -METHODDEF(void) -start_pass_dcolor (j_decompress_ptr cinfo) -{ - /* no work needed */ -} - - -/* - * Module initialization routine for output colorspace conversion. - */ - -GLOBAL(void) -jinit_color_deconverter (j_decompress_ptr cinfo) -{ - my_cconvert_ptr cconvert; - int ci; - - cconvert = (my_cconvert_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(my_color_deconverter)); - cinfo->cconvert = (struct jpeg_color_deconverter *) cconvert; - cconvert->pub.start_pass = start_pass_dcolor; - - /* Make sure num_components agrees with jpeg_color_space */ - switch (cinfo->jpeg_color_space) { - case JCS_GRAYSCALE: - if (cinfo->num_components != 1) - ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); - break; - - case JCS_RGB: - case JCS_YCbCr: - if (cinfo->num_components != 3) - ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); - break; - - case JCS_CMYK: - case JCS_YCCK: - if (cinfo->num_components != 4) - ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); - break; - - default: /* JCS_UNKNOWN can be anything */ - if (cinfo->num_components < 1) - ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); - break; - } - - /* Set out_color_components and conversion method based on requested space. - * Also clear the component_needed flags for any unused components, - * so that earlier pipeline stages can avoid useless computation. - */ - - switch (cinfo->out_color_space) { - case JCS_GRAYSCALE: - cinfo->out_color_components = 1; - if (cinfo->jpeg_color_space == JCS_GRAYSCALE || - cinfo->jpeg_color_space == JCS_YCbCr) { - cconvert->pub.color_convert = grayscale_convert; - /* For color->grayscale conversion, only the Y (0) component is needed */ - for (ci = 1; ci < cinfo->num_components; ci++) - cinfo->comp_info[ci].component_needed = FALSE; - } else if (cinfo->jpeg_color_space == JCS_RGB) { - cconvert->pub.color_convert = rgb_gray_convert; - build_rgb_y_table(cinfo); - } else - ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); - break; - - case JCS_RGB: - cinfo->out_color_components = RGB_PIXELSIZE; - if (cinfo->jpeg_color_space == JCS_YCbCr) { - cconvert->pub.color_convert = ycc_rgb_convert; - build_ycc_rgb_table(cinfo); - } else if (cinfo->jpeg_color_space == JCS_GRAYSCALE) { - cconvert->pub.color_convert = gray_rgb_convert; - } else if (cinfo->jpeg_color_space == JCS_RGB) { - cconvert->pub.color_convert = rgb_convert; - } else - ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); - break; - - case JCS_CMYK: - cinfo->out_color_components = 4; - if (cinfo->jpeg_color_space == JCS_YCCK) { - cconvert->pub.color_convert = ycck_cmyk_convert; - build_ycc_rgb_table(cinfo); - } else if (cinfo->jpeg_color_space == JCS_CMYK) { - cconvert->pub.color_convert = null_convert; - } else - ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); - break; - - default: - /* Permit null conversion to same output space */ - if (cinfo->out_color_space == cinfo->jpeg_color_space) { - cinfo->out_color_components = cinfo->num_components; - cconvert->pub.color_convert = null_convert; - } else /* unsupported non-null conversion */ - ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); - break; - } - - if (cinfo->quantize_colors) - cinfo->output_components = 1; /* single colormapped output component */ - else - cinfo->output_components = cinfo->out_color_components; -} diff --git a/jpeg/jdct.h b/jpeg/jdct.h deleted file mode 100755 index 360dec8..0000000 --- a/jpeg/jdct.h +++ /dev/null @@ -1,393 +0,0 @@ -/* - * jdct.h - * - * Copyright (C) 1994-1996, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This include file contains common declarations for the forward and - * inverse DCT modules. These declarations are private to the DCT managers - * (jcdctmgr.c, jddctmgr.c) and the individual DCT algorithms. - * The individual DCT algorithms are kept in separate files to ease - * machine-dependent tuning (e.g., assembly coding). - */ - - -/* - * A forward DCT routine is given a pointer to an input sample array and - * a pointer to a work area of type DCTELEM[]; the DCT is to be performed - * in-place in that buffer. Type DCTELEM is int for 8-bit samples, INT32 - * for 12-bit samples. (NOTE: Floating-point DCT implementations use an - * array of type FAST_FLOAT, instead.) - * The input data is to be fetched from the sample array starting at a - * specified column. (Any row offset needed will be applied to the array - * pointer before it is passed to the FDCT code.) - * Note that the number of samples fetched by the FDCT routine is - * DCT_h_scaled_size * DCT_v_scaled_size. - * The DCT outputs are returned scaled up by a factor of 8; they therefore - * have a range of +-8K for 8-bit data, +-128K for 12-bit data. This - * convention improves accuracy in integer implementations and saves some - * work in floating-point ones. - * Quantization of the output coefficients is done by jcdctmgr.c. - */ - -#if BITS_IN_JSAMPLE == 8 -typedef int DCTELEM; /* 16 or 32 bits is fine */ -#else -typedef INT32 DCTELEM; /* must have 32 bits */ -#endif - -typedef JMETHOD(void, forward_DCT_method_ptr, (DCTELEM * data, - JSAMPARRAY sample_data, - JDIMENSION start_col)); -typedef JMETHOD(void, float_DCT_method_ptr, (FAST_FLOAT * data, - JSAMPARRAY sample_data, - JDIMENSION start_col)); - - -/* - * An inverse DCT routine is given a pointer to the input JBLOCK and a pointer - * to an output sample array. The routine must dequantize the input data as - * well as perform the IDCT; for dequantization, it uses the multiplier table - * pointed to by compptr->dct_table. The output data is to be placed into the - * sample array starting at a specified column. (Any row offset needed will - * be applied to the array pointer before it is passed to the IDCT code.) - * Note that the number of samples emitted by the IDCT routine is - * DCT_h_scaled_size * DCT_v_scaled_size. - */ - -/* typedef inverse_DCT_method_ptr is declared in jpegint.h */ - -/* - * Each IDCT routine has its own ideas about the best dct_table element type. - */ - -typedef MULTIPLIER ISLOW_MULT_TYPE; /* short or int, whichever is faster */ -#if BITS_IN_JSAMPLE == 8 -typedef MULTIPLIER IFAST_MULT_TYPE; /* 16 bits is OK, use short if faster */ -#define IFAST_SCALE_BITS 2 /* fractional bits in scale factors */ -#else -typedef INT32 IFAST_MULT_TYPE; /* need 32 bits for scaled quantizers */ -#define IFAST_SCALE_BITS 13 /* fractional bits in scale factors */ -#endif -typedef FAST_FLOAT FLOAT_MULT_TYPE; /* preferred floating type */ - - -/* - * Each IDCT routine is responsible for range-limiting its results and - * converting them to unsigned form (0..MAXJSAMPLE). The raw outputs could - * be quite far out of range if the input data is corrupt, so a bulletproof - * range-limiting step is required. We use a mask-and-table-lookup method - * to do the combined operations quickly. See the comments with - * prepare_range_limit_table (in jdmaster.c) for more info. - */ - -#define IDCT_range_limit(cinfo) ((cinfo)->sample_range_limit + CENTERJSAMPLE) - -#define RANGE_MASK (MAXJSAMPLE * 4 + 3) /* 2 bits wider than legal samples */ - - -/* Short forms of external names for systems with brain-damaged linkers. */ - -#ifdef NEED_SHORT_EXTERNAL_NAMES -#define jpeg_fdct_islow jFDislow -#define jpeg_fdct_ifast jFDifast -#define jpeg_fdct_float jFDfloat -#define jpeg_fdct_7x7 jFD7x7 -#define jpeg_fdct_6x6 jFD6x6 -#define jpeg_fdct_5x5 jFD5x5 -#define jpeg_fdct_4x4 jFD4x4 -#define jpeg_fdct_3x3 jFD3x3 -#define jpeg_fdct_2x2 jFD2x2 -#define jpeg_fdct_1x1 jFD1x1 -#define jpeg_fdct_9x9 jFD9x9 -#define jpeg_fdct_10x10 jFD10x10 -#define jpeg_fdct_11x11 jFD11x11 -#define jpeg_fdct_12x12 jFD12x12 -#define jpeg_fdct_13x13 jFD13x13 -#define jpeg_fdct_14x14 jFD14x14 -#define jpeg_fdct_15x15 jFD15x15 -#define jpeg_fdct_16x16 jFD16x16 -#define jpeg_fdct_16x8 jFD16x8 -#define jpeg_fdct_14x7 jFD14x7 -#define jpeg_fdct_12x6 jFD12x6 -#define jpeg_fdct_10x5 jFD10x5 -#define jpeg_fdct_8x4 jFD8x4 -#define jpeg_fdct_6x3 jFD6x3 -#define jpeg_fdct_4x2 jFD4x2 -#define jpeg_fdct_2x1 jFD2x1 -#define jpeg_fdct_8x16 jFD8x16 -#define jpeg_fdct_7x14 jFD7x14 -#define jpeg_fdct_6x12 jFD6x12 -#define jpeg_fdct_5x10 jFD5x10 -#define jpeg_fdct_4x8 jFD4x8 -#define jpeg_fdct_3x6 jFD3x6 -#define jpeg_fdct_2x4 jFD2x4 -#define jpeg_fdct_1x2 jFD1x2 -#define jpeg_idct_islow jRDislow -#define jpeg_idct_ifast jRDifast -#define jpeg_idct_float jRDfloat -#define jpeg_idct_7x7 jRD7x7 -#define jpeg_idct_6x6 jRD6x6 -#define jpeg_idct_5x5 jRD5x5 -#define jpeg_idct_4x4 jRD4x4 -#define jpeg_idct_3x3 jRD3x3 -#define jpeg_idct_2x2 jRD2x2 -#define jpeg_idct_1x1 jRD1x1 -#define jpeg_idct_9x9 jRD9x9 -#define jpeg_idct_10x10 jRD10x10 -#define jpeg_idct_11x11 jRD11x11 -#define jpeg_idct_12x12 jRD12x12 -#define jpeg_idct_13x13 jRD13x13 -#define jpeg_idct_14x14 jRD14x14 -#define jpeg_idct_15x15 jRD15x15 -#define jpeg_idct_16x16 jRD16x16 -#define jpeg_idct_16x8 jRD16x8 -#define jpeg_idct_14x7 jRD14x7 -#define jpeg_idct_12x6 jRD12x6 -#define jpeg_idct_10x5 jRD10x5 -#define jpeg_idct_8x4 jRD8x4 -#define jpeg_idct_6x3 jRD6x3 -#define jpeg_idct_4x2 jRD4x2 -#define jpeg_idct_2x1 jRD2x1 -#define jpeg_idct_8x16 jRD8x16 -#define jpeg_idct_7x14 jRD7x14 -#define jpeg_idct_6x12 jRD6x12 -#define jpeg_idct_5x10 jRD5x10 -#define jpeg_idct_4x8 jRD4x8 -#define jpeg_idct_3x6 jRD3x8 -#define jpeg_idct_2x4 jRD2x4 -#define jpeg_idct_1x2 jRD1x2 -#endif /* NEED_SHORT_EXTERNAL_NAMES */ - -/* Extern declarations for the forward and inverse DCT routines. */ - -EXTERN(void) jpeg_fdct_islow - JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); -EXTERN(void) jpeg_fdct_ifast - JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); -EXTERN(void) jpeg_fdct_float - JPP((FAST_FLOAT * data, JSAMPARRAY sample_data, JDIMENSION start_col)); -EXTERN(void) jpeg_fdct_7x7 - JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); -EXTERN(void) jpeg_fdct_6x6 - JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); -EXTERN(void) jpeg_fdct_5x5 - JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); -EXTERN(void) jpeg_fdct_4x4 - JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); -EXTERN(void) jpeg_fdct_3x3 - JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); -EXTERN(void) jpeg_fdct_2x2 - JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); -EXTERN(void) jpeg_fdct_1x1 - JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); -EXTERN(void) jpeg_fdct_9x9 - JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); -EXTERN(void) jpeg_fdct_10x10 - JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); -EXTERN(void) jpeg_fdct_11x11 - JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); -EXTERN(void) jpeg_fdct_12x12 - JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); -EXTERN(void) jpeg_fdct_13x13 - JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); -EXTERN(void) jpeg_fdct_14x14 - JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); -EXTERN(void) jpeg_fdct_15x15 - JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); -EXTERN(void) jpeg_fdct_16x16 - JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); -EXTERN(void) jpeg_fdct_16x8 - JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); -EXTERN(void) jpeg_fdct_14x7 - JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); -EXTERN(void) jpeg_fdct_12x6 - JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); -EXTERN(void) jpeg_fdct_10x5 - JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); -EXTERN(void) jpeg_fdct_8x4 - JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); -EXTERN(void) jpeg_fdct_6x3 - JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); -EXTERN(void) jpeg_fdct_4x2 - JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); -EXTERN(void) jpeg_fdct_2x1 - JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); -EXTERN(void) jpeg_fdct_8x16 - JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); -EXTERN(void) jpeg_fdct_7x14 - JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); -EXTERN(void) jpeg_fdct_6x12 - JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); -EXTERN(void) jpeg_fdct_5x10 - JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); -EXTERN(void) jpeg_fdct_4x8 - JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); -EXTERN(void) jpeg_fdct_3x6 - JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); -EXTERN(void) jpeg_fdct_2x4 - JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); -EXTERN(void) jpeg_fdct_1x2 - JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); - -EXTERN(void) jpeg_idct_islow - JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); -EXTERN(void) jpeg_idct_ifast - JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); -EXTERN(void) jpeg_idct_float - JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); -EXTERN(void) jpeg_idct_7x7 - JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); -EXTERN(void) jpeg_idct_6x6 - JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); -EXTERN(void) jpeg_idct_5x5 - JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); -EXTERN(void) jpeg_idct_4x4 - JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); -EXTERN(void) jpeg_idct_3x3 - JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); -EXTERN(void) jpeg_idct_2x2 - JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); -EXTERN(void) jpeg_idct_1x1 - JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); -EXTERN(void) jpeg_idct_9x9 - JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); -EXTERN(void) jpeg_idct_10x10 - JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); -EXTERN(void) jpeg_idct_11x11 - JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); -EXTERN(void) jpeg_idct_12x12 - JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); -EXTERN(void) jpeg_idct_13x13 - JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); -EXTERN(void) jpeg_idct_14x14 - JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); -EXTERN(void) jpeg_idct_15x15 - JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); -EXTERN(void) jpeg_idct_16x16 - JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); -EXTERN(void) jpeg_idct_16x8 - JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); -EXTERN(void) jpeg_idct_14x7 - JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); -EXTERN(void) jpeg_idct_12x6 - JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); -EXTERN(void) jpeg_idct_10x5 - JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); -EXTERN(void) jpeg_idct_8x4 - JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); -EXTERN(void) jpeg_idct_6x3 - JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); -EXTERN(void) jpeg_idct_4x2 - JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); -EXTERN(void) jpeg_idct_2x1 - JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); -EXTERN(void) jpeg_idct_8x16 - JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); -EXTERN(void) jpeg_idct_7x14 - JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); -EXTERN(void) jpeg_idct_6x12 - JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); -EXTERN(void) jpeg_idct_5x10 - JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); -EXTERN(void) jpeg_idct_4x8 - JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); -EXTERN(void) jpeg_idct_3x6 - JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); -EXTERN(void) jpeg_idct_2x4 - JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); -EXTERN(void) jpeg_idct_1x2 - JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); - - -/* - * Macros for handling fixed-point arithmetic; these are used by many - * but not all of the DCT/IDCT modules. - * - * All values are expected to be of type INT32. - * Fractional constants are scaled left by CONST_BITS bits. - * CONST_BITS is defined within each module using these macros, - * and may differ from one module to the next. - */ - -#define ONE ((INT32) 1) -#define CONST_SCALE (ONE << CONST_BITS) - -/* Convert a positive real constant to an integer scaled by CONST_SCALE. - * Caution: some C compilers fail to reduce "FIX(constant)" at compile time, - * thus causing a lot of useless floating-point operations at run time. - */ - -#define FIX(x) ((INT32) ((x) * CONST_SCALE + 0.5)) - -/* Descale and correctly round an INT32 value that's scaled by N bits. - * We assume RIGHT_SHIFT rounds towards minus infinity, so adding - * the fudge factor is correct for either sign of X. - */ - -#define DESCALE(x,n) RIGHT_SHIFT((x) + (ONE << ((n)-1)), n) - -/* Multiply an INT32 variable by an INT32 constant to yield an INT32 result. - * This macro is used only when the two inputs will actually be no more than - * 16 bits wide, so that a 16x16->32 bit multiply can be used instead of a - * full 32x32 multiply. This provides a useful speedup on many machines. - * Unfortunately there is no way to specify a 16x16->32 multiply portably - * in C, but some C compilers will do the right thing if you provide the - * correct combination of casts. - */ - -#ifdef SHORTxSHORT_32 /* may work if 'int' is 32 bits */ -#define MULTIPLY16C16(var,const) (((INT16) (var)) * ((INT16) (const))) -#endif -#ifdef SHORTxLCONST_32 /* known to work with Microsoft C 6.0 */ -#define MULTIPLY16C16(var,const) (((INT16) (var)) * ((INT32) (const))) -#endif - -#ifndef MULTIPLY16C16 /* default definition */ -#define MULTIPLY16C16(var,const) ((var) * (const)) -#endif - -/* Same except both inputs are variables. */ - -#ifdef SHORTxSHORT_32 /* may work if 'int' is 32 bits */ -#define MULTIPLY16V16(var1,var2) (((INT16) (var1)) * ((INT16) (var2))) -#endif - -#ifndef MULTIPLY16V16 /* default definition */ -#define MULTIPLY16V16(var1,var2) ((var1) * (var2)) -#endif diff --git a/jpeg/jddctmgr.c b/jpeg/jddctmgr.c deleted file mode 100755 index 0ded9d5..0000000 --- a/jpeg/jddctmgr.c +++ /dev/null @@ -1,384 +0,0 @@ -/* - * jddctmgr.c - * - * Copyright (C) 1994-1996, Thomas G. Lane. - * Modified 2002-2010 by Guido Vollbeding. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains the inverse-DCT management logic. - * This code selects a particular IDCT implementation to be used, - * and it performs related housekeeping chores. No code in this file - * is executed per IDCT step, only during output pass setup. - * - * Note that the IDCT routines are responsible for performing coefficient - * dequantization as well as the IDCT proper. This module sets up the - * dequantization multiplier table needed by the IDCT routine. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" -#include "jdct.h" /* Private declarations for DCT subsystem */ - - -/* - * The decompressor input side (jdinput.c) saves away the appropriate - * quantization table for each component at the start of the first scan - * involving that component. (This is necessary in order to correctly - * decode files that reuse Q-table slots.) - * When we are ready to make an output pass, the saved Q-table is converted - * to a multiplier table that will actually be used by the IDCT routine. - * The multiplier table contents are IDCT-method-dependent. To support - * application changes in IDCT method between scans, we can remake the - * multiplier tables if necessary. - * In buffered-image mode, the first output pass may occur before any data - * has been seen for some components, and thus before their Q-tables have - * been saved away. To handle this case, multiplier tables are preset - * to zeroes; the result of the IDCT will be a neutral gray level. - */ - - -/* Private subobject for this module */ - -typedef struct { - struct jpeg_inverse_dct pub; /* public fields */ - - /* This array contains the IDCT method code that each multiplier table - * is currently set up for, or -1 if it's not yet set up. - * The actual multiplier tables are pointed to by dct_table in the - * per-component comp_info structures. - */ - int cur_method[MAX_COMPONENTS]; -} my_idct_controller; - -typedef my_idct_controller * my_idct_ptr; - - -/* Allocated multiplier tables: big enough for any supported variant */ - -typedef union { - ISLOW_MULT_TYPE islow_array[DCTSIZE2]; -#ifdef DCT_IFAST_SUPPORTED - IFAST_MULT_TYPE ifast_array[DCTSIZE2]; -#endif -#ifdef DCT_FLOAT_SUPPORTED - FLOAT_MULT_TYPE float_array[DCTSIZE2]; -#endif -} multiplier_table; - - -/* The current scaled-IDCT routines require ISLOW-style multiplier tables, - * so be sure to compile that code if either ISLOW or SCALING is requested. - */ -#ifdef DCT_ISLOW_SUPPORTED -#define PROVIDE_ISLOW_TABLES -#else -#ifdef IDCT_SCALING_SUPPORTED -#define PROVIDE_ISLOW_TABLES -#endif -#endif - - -/* - * Prepare for an output pass. - * Here we select the proper IDCT routine for each component and build - * a matching multiplier table. - */ - -METHODDEF(void) -start_pass (j_decompress_ptr cinfo) -{ - my_idct_ptr idct = (my_idct_ptr) cinfo->idct; - int ci, i; - jpeg_component_info *compptr; - int method = 0; - inverse_DCT_method_ptr method_ptr = NULL; - JQUANT_TBL * qtbl; - - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - /* Select the proper IDCT routine for this component's scaling */ - switch ((compptr->DCT_h_scaled_size << 8) + compptr->DCT_v_scaled_size) { -#ifdef IDCT_SCALING_SUPPORTED - case ((1 << 8) + 1): - method_ptr = jpeg_idct_1x1; - method = JDCT_ISLOW; /* jidctint uses islow-style table */ - break; - case ((2 << 8) + 2): - method_ptr = jpeg_idct_2x2; - method = JDCT_ISLOW; /* jidctint uses islow-style table */ - break; - case ((3 << 8) + 3): - method_ptr = jpeg_idct_3x3; - method = JDCT_ISLOW; /* jidctint uses islow-style table */ - break; - case ((4 << 8) + 4): - method_ptr = jpeg_idct_4x4; - method = JDCT_ISLOW; /* jidctint uses islow-style table */ - break; - case ((5 << 8) + 5): - method_ptr = jpeg_idct_5x5; - method = JDCT_ISLOW; /* jidctint uses islow-style table */ - break; - case ((6 << 8) + 6): - method_ptr = jpeg_idct_6x6; - method = JDCT_ISLOW; /* jidctint uses islow-style table */ - break; - case ((7 << 8) + 7): - method_ptr = jpeg_idct_7x7; - method = JDCT_ISLOW; /* jidctint uses islow-style table */ - break; - case ((9 << 8) + 9): - method_ptr = jpeg_idct_9x9; - method = JDCT_ISLOW; /* jidctint uses islow-style table */ - break; - case ((10 << 8) + 10): - method_ptr = jpeg_idct_10x10; - method = JDCT_ISLOW; /* jidctint uses islow-style table */ - break; - case ((11 << 8) + 11): - method_ptr = jpeg_idct_11x11; - method = JDCT_ISLOW; /* jidctint uses islow-style table */ - break; - case ((12 << 8) + 12): - method_ptr = jpeg_idct_12x12; - method = JDCT_ISLOW; /* jidctint uses islow-style table */ - break; - case ((13 << 8) + 13): - method_ptr = jpeg_idct_13x13; - method = JDCT_ISLOW; /* jidctint uses islow-style table */ - break; - case ((14 << 8) + 14): - method_ptr = jpeg_idct_14x14; - method = JDCT_ISLOW; /* jidctint uses islow-style table */ - break; - case ((15 << 8) + 15): - method_ptr = jpeg_idct_15x15; - method = JDCT_ISLOW; /* jidctint uses islow-style table */ - break; - case ((16 << 8) + 16): - method_ptr = jpeg_idct_16x16; - method = JDCT_ISLOW; /* jidctint uses islow-style table */ - break; - case ((16 << 8) + 8): - method_ptr = jpeg_idct_16x8; - method = JDCT_ISLOW; /* jidctint uses islow-style table */ - break; - case ((14 << 8) + 7): - method_ptr = jpeg_idct_14x7; - method = JDCT_ISLOW; /* jidctint uses islow-style table */ - break; - case ((12 << 8) + 6): - method_ptr = jpeg_idct_12x6; - method = JDCT_ISLOW; /* jidctint uses islow-style table */ - break; - case ((10 << 8) + 5): - method_ptr = jpeg_idct_10x5; - method = JDCT_ISLOW; /* jidctint uses islow-style table */ - break; - case ((8 << 8) + 4): - method_ptr = jpeg_idct_8x4; - method = JDCT_ISLOW; /* jidctint uses islow-style table */ - break; - case ((6 << 8) + 3): - method_ptr = jpeg_idct_6x3; - method = JDCT_ISLOW; /* jidctint uses islow-style table */ - break; - case ((4 << 8) + 2): - method_ptr = jpeg_idct_4x2; - method = JDCT_ISLOW; /* jidctint uses islow-style table */ - break; - case ((2 << 8) + 1): - method_ptr = jpeg_idct_2x1; - method = JDCT_ISLOW; /* jidctint uses islow-style table */ - break; - case ((8 << 8) + 16): - method_ptr = jpeg_idct_8x16; - method = JDCT_ISLOW; /* jidctint uses islow-style table */ - break; - case ((7 << 8) + 14): - method_ptr = jpeg_idct_7x14; - method = JDCT_ISLOW; /* jidctint uses islow-style table */ - break; - case ((6 << 8) + 12): - method_ptr = jpeg_idct_6x12; - method = JDCT_ISLOW; /* jidctint uses islow-style table */ - break; - case ((5 << 8) + 10): - method_ptr = jpeg_idct_5x10; - method = JDCT_ISLOW; /* jidctint uses islow-style table */ - break; - case ((4 << 8) + 8): - method_ptr = jpeg_idct_4x8; - method = JDCT_ISLOW; /* jidctint uses islow-style table */ - break; - case ((3 << 8) + 6): - method_ptr = jpeg_idct_3x6; - method = JDCT_ISLOW; /* jidctint uses islow-style table */ - break; - case ((2 << 8) + 4): - method_ptr = jpeg_idct_2x4; - method = JDCT_ISLOW; /* jidctint uses islow-style table */ - break; - case ((1 << 8) + 2): - method_ptr = jpeg_idct_1x2; - method = JDCT_ISLOW; /* jidctint uses islow-style table */ - break; -#endif - case ((DCTSIZE << 8) + DCTSIZE): - switch (cinfo->dct_method) { -#ifdef DCT_ISLOW_SUPPORTED - case JDCT_ISLOW: - method_ptr = jpeg_idct_islow; - method = JDCT_ISLOW; - break; -#endif -#ifdef DCT_IFAST_SUPPORTED - case JDCT_IFAST: - method_ptr = jpeg_idct_ifast; - method = JDCT_IFAST; - break; -#endif -#ifdef DCT_FLOAT_SUPPORTED - case JDCT_FLOAT: - method_ptr = jpeg_idct_float; - method = JDCT_FLOAT; - break; -#endif - default: - ERREXIT(cinfo, JERR_NOT_COMPILED); - break; - } - break; - default: - ERREXIT2(cinfo, JERR_BAD_DCTSIZE, - compptr->DCT_h_scaled_size, compptr->DCT_v_scaled_size); - break; - } - idct->pub.inverse_DCT[ci] = method_ptr; - /* Create multiplier table from quant table. - * However, we can skip this if the component is uninteresting - * or if we already built the table. Also, if no quant table - * has yet been saved for the component, we leave the - * multiplier table all-zero; we'll be reading zeroes from the - * coefficient controller's buffer anyway. - */ - if (! compptr->component_needed || idct->cur_method[ci] == method) - continue; - qtbl = compptr->quant_table; - if (qtbl == NULL) /* happens if no data yet for component */ - continue; - idct->cur_method[ci] = method; - switch (method) { -#ifdef PROVIDE_ISLOW_TABLES - case JDCT_ISLOW: - { - /* For LL&M IDCT method, multipliers are equal to raw quantization - * coefficients, but are stored as ints to ensure access efficiency. - */ - ISLOW_MULT_TYPE * ismtbl = (ISLOW_MULT_TYPE *) compptr->dct_table; - for (i = 0; i < DCTSIZE2; i++) { - ismtbl[i] = (ISLOW_MULT_TYPE) qtbl->quantval[i]; - } - } - break; -#endif -#ifdef DCT_IFAST_SUPPORTED - case JDCT_IFAST: - { - /* For AA&N IDCT method, multipliers are equal to quantization - * coefficients scaled by scalefactor[row]*scalefactor[col], where - * scalefactor[0] = 1 - * scalefactor[k] = cos(k*PI/16) * sqrt(2) for k=1..7 - * For integer operation, the multiplier table is to be scaled by - * IFAST_SCALE_BITS. - */ - IFAST_MULT_TYPE * ifmtbl = (IFAST_MULT_TYPE *) compptr->dct_table; -#define CONST_BITS 14 - static const INT16 aanscales[DCTSIZE2] = { - /* precomputed values scaled up by 14 bits */ - 16384, 22725, 21407, 19266, 16384, 12873, 8867, 4520, - 22725, 31521, 29692, 26722, 22725, 17855, 12299, 6270, - 21407, 29692, 27969, 25172, 21407, 16819, 11585, 5906, - 19266, 26722, 25172, 22654, 19266, 15137, 10426, 5315, - 16384, 22725, 21407, 19266, 16384, 12873, 8867, 4520, - 12873, 17855, 16819, 15137, 12873, 10114, 6967, 3552, - 8867, 12299, 11585, 10426, 8867, 6967, 4799, 2446, - 4520, 6270, 5906, 5315, 4520, 3552, 2446, 1247 - }; - SHIFT_TEMPS - - for (i = 0; i < DCTSIZE2; i++) { - ifmtbl[i] = (IFAST_MULT_TYPE) - DESCALE(MULTIPLY16V16((INT32) qtbl->quantval[i], - (INT32) aanscales[i]), - CONST_BITS-IFAST_SCALE_BITS); - } - } - break; -#endif -#ifdef DCT_FLOAT_SUPPORTED - case JDCT_FLOAT: - { - /* For float AA&N IDCT method, multipliers are equal to quantization - * coefficients scaled by scalefactor[row]*scalefactor[col], where - * scalefactor[0] = 1 - * scalefactor[k] = cos(k*PI/16) * sqrt(2) for k=1..7 - * We apply a further scale factor of 1/8. - */ - FLOAT_MULT_TYPE * fmtbl = (FLOAT_MULT_TYPE *) compptr->dct_table; - int row, col; - static const double aanscalefactor[DCTSIZE] = { - 1.0, 1.387039845, 1.306562965, 1.175875602, - 1.0, 0.785694958, 0.541196100, 0.275899379 - }; - - i = 0; - for (row = 0; row < DCTSIZE; row++) { - for (col = 0; col < DCTSIZE; col++) { - fmtbl[i] = (FLOAT_MULT_TYPE) - ((double) qtbl->quantval[i] * - aanscalefactor[row] * aanscalefactor[col] * 0.125); - i++; - } - } - } - break; -#endif - default: - ERREXIT(cinfo, JERR_NOT_COMPILED); - break; - } - } -} - - -/* - * Initialize IDCT manager. - */ - -GLOBAL(void) -jinit_inverse_dct (j_decompress_ptr cinfo) -{ - my_idct_ptr idct; - int ci; - jpeg_component_info *compptr; - - idct = (my_idct_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(my_idct_controller)); - cinfo->idct = (struct jpeg_inverse_dct *) idct; - idct->pub.start_pass = start_pass; - - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - /* Allocate and pre-zero a multiplier table for each component */ - compptr->dct_table = - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(multiplier_table)); - MEMZERO(compptr->dct_table, SIZEOF(multiplier_table)); - /* Mark multiplier table not yet set up for any method */ - idct->cur_method[ci] = -1; - } -} diff --git a/jpeg/jdhuff.c b/jpeg/jdhuff.c deleted file mode 100755 index 06f92fe..0000000 --- a/jpeg/jdhuff.c +++ /dev/null @@ -1,1541 +0,0 @@ -/* - * jdhuff.c - * - * Copyright (C) 1991-1997, Thomas G. Lane. - * Modified 2006-2009 by Guido Vollbeding. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains Huffman entropy decoding routines. - * Both sequential and progressive modes are supported in this single module. - * - * Much of the complexity here has to do with supporting input suspension. - * If the data source module demands suspension, we want to be able to back - * up to the start of the current MCU. To do this, we copy state variables - * into local working storage, and update them back to the permanent - * storage only upon successful completion of an MCU. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* Derived data constructed for each Huffman table */ - -#define HUFF_LOOKAHEAD 8 /* # of bits of lookahead */ - -typedef struct { - /* Basic tables: (element [0] of each array is unused) */ - INT32 maxcode[18]; /* largest code of length k (-1 if none) */ - /* (maxcode[17] is a sentinel to ensure jpeg_huff_decode terminates) */ - INT32 valoffset[17]; /* huffval[] offset for codes of length k */ - /* valoffset[k] = huffval[] index of 1st symbol of code length k, less - * the smallest code of length k; so given a code of length k, the - * corresponding symbol is huffval[code + valoffset[k]] - */ - - /* Link to public Huffman table (needed only in jpeg_huff_decode) */ - JHUFF_TBL *pub; - - /* Lookahead tables: indexed by the next HUFF_LOOKAHEAD bits of - * the input data stream. If the next Huffman code is no more - * than HUFF_LOOKAHEAD bits long, we can obtain its length and - * the corresponding symbol directly from these tables. - */ - int look_nbits[1< 32 bits on your machine, and shifting/masking longs is - * reasonably fast, making bit_buf_type be long and setting BIT_BUF_SIZE - * appropriately should be a win. Unfortunately we can't define the size - * with something like #define BIT_BUF_SIZE (sizeof(bit_buf_type)*8) - * because not all machines measure sizeof in 8-bit bytes. - */ - -typedef struct { /* Bitreading state saved across MCUs */ - bit_buf_type get_buffer; /* current bit-extraction buffer */ - int bits_left; /* # of unused bits in it */ -} bitread_perm_state; - -typedef struct { /* Bitreading working state within an MCU */ - /* Current data source location */ - /* We need a copy, rather than munging the original, in case of suspension */ - const JOCTET * next_input_byte; /* => next byte to read from source */ - size_t bytes_in_buffer; /* # of bytes remaining in source buffer */ - /* Bit input buffer --- note these values are kept in register variables, - * not in this struct, inside the inner loops. - */ - bit_buf_type get_buffer; /* current bit-extraction buffer */ - int bits_left; /* # of unused bits in it */ - /* Pointer needed by jpeg_fill_bit_buffer. */ - j_decompress_ptr cinfo; /* back link to decompress master record */ -} bitread_working_state; - -/* Macros to declare and load/save bitread local variables. */ -#define BITREAD_STATE_VARS \ - register bit_buf_type get_buffer; \ - register int bits_left; \ - bitread_working_state br_state - -#define BITREAD_LOAD_STATE(cinfop,permstate) \ - br_state.cinfo = cinfop; \ - br_state.next_input_byte = cinfop->src->next_input_byte; \ - br_state.bytes_in_buffer = cinfop->src->bytes_in_buffer; \ - get_buffer = permstate.get_buffer; \ - bits_left = permstate.bits_left; - -#define BITREAD_SAVE_STATE(cinfop,permstate) \ - cinfop->src->next_input_byte = br_state.next_input_byte; \ - cinfop->src->bytes_in_buffer = br_state.bytes_in_buffer; \ - permstate.get_buffer = get_buffer; \ - permstate.bits_left = bits_left - -/* - * These macros provide the in-line portion of bit fetching. - * Use CHECK_BIT_BUFFER to ensure there are N bits in get_buffer - * before using GET_BITS, PEEK_BITS, or DROP_BITS. - * The variables get_buffer and bits_left are assumed to be locals, - * but the state struct might not be (jpeg_huff_decode needs this). - * CHECK_BIT_BUFFER(state,n,action); - * Ensure there are N bits in get_buffer; if suspend, take action. - * val = GET_BITS(n); - * Fetch next N bits. - * val = PEEK_BITS(n); - * Fetch next N bits without removing them from the buffer. - * DROP_BITS(n); - * Discard next N bits. - * The value N should be a simple variable, not an expression, because it - * is evaluated multiple times. - */ - -#define CHECK_BIT_BUFFER(state,nbits,action) \ - { if (bits_left < (nbits)) { \ - if (! jpeg_fill_bit_buffer(&(state),get_buffer,bits_left,nbits)) \ - { action; } \ - get_buffer = (state).get_buffer; bits_left = (state).bits_left; } } - -#define GET_BITS(nbits) \ - (((int) (get_buffer >> (bits_left -= (nbits)))) & BIT_MASK(nbits)) - -#define PEEK_BITS(nbits) \ - (((int) (get_buffer >> (bits_left - (nbits)))) & BIT_MASK(nbits)) - -#define DROP_BITS(nbits) \ - (bits_left -= (nbits)) - - -/* - * Code for extracting next Huffman-coded symbol from input bit stream. - * Again, this is time-critical and we make the main paths be macros. - * - * We use a lookahead table to process codes of up to HUFF_LOOKAHEAD bits - * without looping. Usually, more than 95% of the Huffman codes will be 8 - * or fewer bits long. The few overlength codes are handled with a loop, - * which need not be inline code. - * - * Notes about the HUFF_DECODE macro: - * 1. Near the end of the data segment, we may fail to get enough bits - * for a lookahead. In that case, we do it the hard way. - * 2. If the lookahead table contains no entry, the next code must be - * more than HUFF_LOOKAHEAD bits long. - * 3. jpeg_huff_decode returns -1 if forced to suspend. - */ - -#define HUFF_DECODE(result,state,htbl,failaction,slowlabel) \ -{ register int nb, look; \ - if (bits_left < HUFF_LOOKAHEAD) { \ - if (! jpeg_fill_bit_buffer(&state,get_buffer,bits_left, 0)) {failaction;} \ - get_buffer = state.get_buffer; bits_left = state.bits_left; \ - if (bits_left < HUFF_LOOKAHEAD) { \ - nb = 1; goto slowlabel; \ - } \ - } \ - look = PEEK_BITS(HUFF_LOOKAHEAD); \ - if ((nb = htbl->look_nbits[look]) != 0) { \ - DROP_BITS(nb); \ - result = htbl->look_sym[look]; \ - } else { \ - nb = HUFF_LOOKAHEAD+1; \ -slowlabel: \ - if ((result=jpeg_huff_decode(&state,get_buffer,bits_left,htbl,nb)) < 0) \ - { failaction; } \ - get_buffer = state.get_buffer; bits_left = state.bits_left; \ - } \ -} - - -/* - * Expanded entropy decoder object for Huffman decoding. - * - * The savable_state subrecord contains fields that change within an MCU, - * but must not be updated permanently until we complete the MCU. - */ - -typedef struct { - unsigned int EOBRUN; /* remaining EOBs in EOBRUN */ - int last_dc_val[MAX_COMPS_IN_SCAN]; /* last DC coef for each component */ -} savable_state; - -/* This macro is to work around compilers with missing or broken - * structure assignment. You'll need to fix this code if you have - * such a compiler and you change MAX_COMPS_IN_SCAN. - */ - -#ifndef NO_STRUCT_ASSIGN -#define ASSIGN_STATE(dest,src) ((dest) = (src)) -#else -#if MAX_COMPS_IN_SCAN == 4 -#define ASSIGN_STATE(dest,src) \ - ((dest).EOBRUN = (src).EOBRUN, \ - (dest).last_dc_val[0] = (src).last_dc_val[0], \ - (dest).last_dc_val[1] = (src).last_dc_val[1], \ - (dest).last_dc_val[2] = (src).last_dc_val[2], \ - (dest).last_dc_val[3] = (src).last_dc_val[3]) -#endif -#endif - - -typedef struct { - struct jpeg_entropy_decoder pub; /* public fields */ - - /* These fields are loaded into local variables at start of each MCU. - * In case of suspension, we exit WITHOUT updating them. - */ - bitread_perm_state bitstate; /* Bit buffer at start of MCU */ - savable_state saved; /* Other state at start of MCU */ - - /* These fields are NOT loaded into local working state. */ - boolean insufficient_data; /* set TRUE after emitting warning */ - unsigned int restarts_to_go; /* MCUs left in this restart interval */ - - /* Following two fields used only in progressive mode */ - - /* Pointers to derived tables (these workspaces have image lifespan) */ - d_derived_tbl * derived_tbls[NUM_HUFF_TBLS]; - - d_derived_tbl * ac_derived_tbl; /* active table during an AC scan */ - - /* Following fields used only in sequential mode */ - - /* Pointers to derived tables (these workspaces have image lifespan) */ - d_derived_tbl * dc_derived_tbls[NUM_HUFF_TBLS]; - d_derived_tbl * ac_derived_tbls[NUM_HUFF_TBLS]; - - /* Precalculated info set up by start_pass for use in decode_mcu: */ - - /* Pointers to derived tables to be used for each block within an MCU */ - d_derived_tbl * dc_cur_tbls[D_MAX_BLOCKS_IN_MCU]; - d_derived_tbl * ac_cur_tbls[D_MAX_BLOCKS_IN_MCU]; - /* Whether we care about the DC and AC coefficient values for each block */ - int coef_limit[D_MAX_BLOCKS_IN_MCU]; -} huff_entropy_decoder; - -typedef huff_entropy_decoder * huff_entropy_ptr; - - -static const int jpeg_zigzag_order[8][8] = { - { 0, 1, 5, 6, 14, 15, 27, 28 }, - { 2, 4, 7, 13, 16, 26, 29, 42 }, - { 3, 8, 12, 17, 25, 30, 41, 43 }, - { 9, 11, 18, 24, 31, 40, 44, 53 }, - { 10, 19, 23, 32, 39, 45, 52, 54 }, - { 20, 22, 33, 38, 46, 51, 55, 60 }, - { 21, 34, 37, 47, 50, 56, 59, 61 }, - { 35, 36, 48, 49, 57, 58, 62, 63 } -}; - -static const int jpeg_zigzag_order7[7][7] = { - { 0, 1, 5, 6, 14, 15, 27 }, - { 2, 4, 7, 13, 16, 26, 28 }, - { 3, 8, 12, 17, 25, 29, 38 }, - { 9, 11, 18, 24, 30, 37, 39 }, - { 10, 19, 23, 31, 36, 40, 45 }, - { 20, 22, 32, 35, 41, 44, 46 }, - { 21, 33, 34, 42, 43, 47, 48 } -}; - -static const int jpeg_zigzag_order6[6][6] = { - { 0, 1, 5, 6, 14, 15 }, - { 2, 4, 7, 13, 16, 25 }, - { 3, 8, 12, 17, 24, 26 }, - { 9, 11, 18, 23, 27, 32 }, - { 10, 19, 22, 28, 31, 33 }, - { 20, 21, 29, 30, 34, 35 } -}; - -static const int jpeg_zigzag_order5[5][5] = { - { 0, 1, 5, 6, 14 }, - { 2, 4, 7, 13, 15 }, - { 3, 8, 12, 16, 21 }, - { 9, 11, 17, 20, 22 }, - { 10, 18, 19, 23, 24 } -}; - -static const int jpeg_zigzag_order4[4][4] = { - { 0, 1, 5, 6 }, - { 2, 4, 7, 12 }, - { 3, 8, 11, 13 }, - { 9, 10, 14, 15 } -}; - -static const int jpeg_zigzag_order3[3][3] = { - { 0, 1, 5 }, - { 2, 4, 6 }, - { 3, 7, 8 } -}; - -static const int jpeg_zigzag_order2[2][2] = { - { 0, 1 }, - { 2, 3 } -}; - - -/* - * Compute the derived values for a Huffman table. - * This routine also performs some validation checks on the table. - */ - -LOCAL(void) -jpeg_make_d_derived_tbl (j_decompress_ptr cinfo, boolean isDC, int tblno, - d_derived_tbl ** pdtbl) -{ - JHUFF_TBL *htbl; - d_derived_tbl *dtbl; - int p, i, l, si, numsymbols; - int lookbits, ctr; - char huffsize[257]; - unsigned int huffcode[257]; - unsigned int code; - - /* Note that huffsize[] and huffcode[] are filled in code-length order, - * paralleling the order of the symbols themselves in htbl->huffval[]. - */ - - /* Find the input Huffman table */ - if (tblno < 0 || tblno >= NUM_HUFF_TBLS) - ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tblno); - htbl = - isDC ? cinfo->dc_huff_tbl_ptrs[tblno] : cinfo->ac_huff_tbl_ptrs[tblno]; - if (htbl == NULL) - ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tblno); - - /* Allocate a workspace if we haven't already done so. */ - if (*pdtbl == NULL) - *pdtbl = (d_derived_tbl *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(d_derived_tbl)); - dtbl = *pdtbl; - dtbl->pub = htbl; /* fill in back link */ - - /* Figure C.1: make table of Huffman code length for each symbol */ - - p = 0; - for (l = 1; l <= 16; l++) { - i = (int) htbl->bits[l]; - if (i < 0 || p + i > 256) /* protect against table overrun */ - ERREXIT(cinfo, JERR_BAD_HUFF_TABLE); - while (i--) - huffsize[p++] = (char) l; - } - huffsize[p] = 0; - numsymbols = p; - - /* Figure C.2: generate the codes themselves */ - /* We also validate that the counts represent a legal Huffman code tree. */ - - code = 0; - si = huffsize[0]; - p = 0; - while (huffsize[p]) { - while (((int) huffsize[p]) == si) { - huffcode[p++] = code; - code++; - } - /* code is now 1 more than the last code used for codelength si; but - * it must still fit in si bits, since no code is allowed to be all ones. - */ - if (((INT32) code) >= (((INT32) 1) << si)) - ERREXIT(cinfo, JERR_BAD_HUFF_TABLE); - code <<= 1; - si++; - } - - /* Figure F.15: generate decoding tables for bit-sequential decoding */ - - p = 0; - for (l = 1; l <= 16; l++) { - if (htbl->bits[l]) { - /* valoffset[l] = huffval[] index of 1st symbol of code length l, - * minus the minimum code of length l - */ - dtbl->valoffset[l] = (INT32) p - (INT32) huffcode[p]; - p += htbl->bits[l]; - dtbl->maxcode[l] = huffcode[p-1]; /* maximum code of length l */ - } else { - dtbl->maxcode[l] = -1; /* -1 if no codes of this length */ - } - } - dtbl->maxcode[17] = 0xFFFFFL; /* ensures jpeg_huff_decode terminates */ - - /* Compute lookahead tables to speed up decoding. - * First we set all the table entries to 0, indicating "too long"; - * then we iterate through the Huffman codes that are short enough and - * fill in all the entries that correspond to bit sequences starting - * with that code. - */ - - MEMZERO(dtbl->look_nbits, SIZEOF(dtbl->look_nbits)); - - p = 0; - for (l = 1; l <= HUFF_LOOKAHEAD; l++) { - for (i = 1; i <= (int) htbl->bits[l]; i++, p++) { - /* l = current code's length, p = its index in huffcode[] & huffval[]. */ - /* Generate left-justified code followed by all possible bit sequences */ - lookbits = huffcode[p] << (HUFF_LOOKAHEAD-l); - for (ctr = 1 << (HUFF_LOOKAHEAD-l); ctr > 0; ctr--) { - dtbl->look_nbits[lookbits] = l; - dtbl->look_sym[lookbits] = htbl->huffval[p]; - lookbits++; - } - } - } - - /* Validate symbols as being reasonable. - * For AC tables, we make no check, but accept all byte values 0..255. - * For DC tables, we require the symbols to be in range 0..15. - * (Tighter bounds could be applied depending on the data depth and mode, - * but this is sufficient to ensure safe decoding.) - */ - if (isDC) { - for (i = 0; i < numsymbols; i++) { - int sym = htbl->huffval[i]; - if (sym < 0 || sym > 15) - ERREXIT(cinfo, JERR_BAD_HUFF_TABLE); - } - } -} - - -/* - * Out-of-line code for bit fetching. - * Note: current values of get_buffer and bits_left are passed as parameters, - * but are returned in the corresponding fields of the state struct. - * - * On most machines MIN_GET_BITS should be 25 to allow the full 32-bit width - * of get_buffer to be used. (On machines with wider words, an even larger - * buffer could be used.) However, on some machines 32-bit shifts are - * quite slow and take time proportional to the number of places shifted. - * (This is true with most PC compilers, for instance.) In this case it may - * be a win to set MIN_GET_BITS to the minimum value of 15. This reduces the - * average shift distance at the cost of more calls to jpeg_fill_bit_buffer. - */ - -#ifdef SLOW_SHIFT_32 -#define MIN_GET_BITS 15 /* minimum allowable value */ -#else -#define MIN_GET_BITS (BIT_BUF_SIZE-7) -#endif - - -LOCAL(boolean) -jpeg_fill_bit_buffer (bitread_working_state * state, - register bit_buf_type get_buffer, register int bits_left, - int nbits) -/* Load up the bit buffer to a depth of at least nbits */ -{ - /* Copy heavily used state fields into locals (hopefully registers) */ - register const JOCTET * next_input_byte = state->next_input_byte; - register size_t bytes_in_buffer = state->bytes_in_buffer; - j_decompress_ptr cinfo = state->cinfo; - - /* Attempt to load at least MIN_GET_BITS bits into get_buffer. */ - /* (It is assumed that no request will be for more than that many bits.) */ - /* We fail to do so only if we hit a marker or are forced to suspend. */ - - if (cinfo->unread_marker == 0) { /* cannot advance past a marker */ - while (bits_left < MIN_GET_BITS) { - register int c; - - /* Attempt to read a byte */ - if (bytes_in_buffer == 0) { - if (! (*cinfo->src->fill_input_buffer) (cinfo)) - return FALSE; - next_input_byte = cinfo->src->next_input_byte; - bytes_in_buffer = cinfo->src->bytes_in_buffer; - } - bytes_in_buffer--; - c = GETJOCTET(*next_input_byte++); - - /* If it's 0xFF, check and discard stuffed zero byte */ - if (c == 0xFF) { - /* Loop here to discard any padding FF's on terminating marker, - * so that we can save a valid unread_marker value. NOTE: we will - * accept multiple FF's followed by a 0 as meaning a single FF data - * byte. This data pattern is not valid according to the standard. - */ - do { - if (bytes_in_buffer == 0) { - if (! (*cinfo->src->fill_input_buffer) (cinfo)) - return FALSE; - next_input_byte = cinfo->src->next_input_byte; - bytes_in_buffer = cinfo->src->bytes_in_buffer; - } - bytes_in_buffer--; - c = GETJOCTET(*next_input_byte++); - } while (c == 0xFF); - - if (c == 0) { - /* Found FF/00, which represents an FF data byte */ - c = 0xFF; - } else { - /* Oops, it's actually a marker indicating end of compressed data. - * Save the marker code for later use. - * Fine point: it might appear that we should save the marker into - * bitread working state, not straight into permanent state. But - * once we have hit a marker, we cannot need to suspend within the - * current MCU, because we will read no more bytes from the data - * source. So it is OK to update permanent state right away. - */ - cinfo->unread_marker = c; - /* See if we need to insert some fake zero bits. */ - goto no_more_bytes; - } - } - - /* OK, load c into get_buffer */ - get_buffer = (get_buffer << 8) | c; - bits_left += 8; - } /* end while */ - } else { - no_more_bytes: - /* We get here if we've read the marker that terminates the compressed - * data segment. There should be enough bits in the buffer register - * to satisfy the request; if so, no problem. - */ - if (nbits > bits_left) { - /* Uh-oh. Report corrupted data to user and stuff zeroes into - * the data stream, so that we can produce some kind of image. - * We use a nonvolatile flag to ensure that only one warning message - * appears per data segment. - */ - if (! ((huff_entropy_ptr) cinfo->entropy)->insufficient_data) { - WARNMS(cinfo, JWRN_HIT_MARKER); - ((huff_entropy_ptr) cinfo->entropy)->insufficient_data = TRUE; - } - /* Fill the buffer with zero bits */ - get_buffer <<= MIN_GET_BITS - bits_left; - bits_left = MIN_GET_BITS; - } - } - - /* Unload the local registers */ - state->next_input_byte = next_input_byte; - state->bytes_in_buffer = bytes_in_buffer; - state->get_buffer = get_buffer; - state->bits_left = bits_left; - - return TRUE; -} - - -/* - * Figure F.12: extend sign bit. - * On some machines, a shift and sub will be faster than a table lookup. - */ - -#ifdef AVOID_TABLES - -#define BIT_MASK(nbits) ((1<<(nbits))-1) -#define HUFF_EXTEND(x,s) ((x) < (1<<((s)-1)) ? (x) - ((1<<(s))-1) : (x)) - -#else - -#define BIT_MASK(nbits) bmask[nbits] -#define HUFF_EXTEND(x,s) ((x) <= bmask[(s) - 1] ? (x) - bmask[s] : (x)) - -static const int bmask[16] = /* bmask[n] is mask for n rightmost bits */ - { 0, 0x0001, 0x0003, 0x0007, 0x000F, 0x001F, 0x003F, 0x007F, 0x00FF, - 0x01FF, 0x03FF, 0x07FF, 0x0FFF, 0x1FFF, 0x3FFF, 0x7FFF }; - -#endif /* AVOID_TABLES */ - - -/* - * Out-of-line code for Huffman code decoding. - */ - -LOCAL(int) -jpeg_huff_decode (bitread_working_state * state, - register bit_buf_type get_buffer, register int bits_left, - d_derived_tbl * htbl, int min_bits) -{ - register int l = min_bits; - register INT32 code; - - /* HUFF_DECODE has determined that the code is at least min_bits */ - /* bits long, so fetch that many bits in one swoop. */ - - CHECK_BIT_BUFFER(*state, l, return -1); - code = GET_BITS(l); - - /* Collect the rest of the Huffman code one bit at a time. */ - /* This is per Figure F.16 in the JPEG spec. */ - - while (code > htbl->maxcode[l]) { - code <<= 1; - CHECK_BIT_BUFFER(*state, 1, return -1); - code |= GET_BITS(1); - l++; - } - - /* Unload the local registers */ - state->get_buffer = get_buffer; - state->bits_left = bits_left; - - /* With garbage input we may reach the sentinel value l = 17. */ - - if (l > 16) { - WARNMS(state->cinfo, JWRN_HUFF_BAD_CODE); - return 0; /* fake a zero as the safest result */ - } - - return htbl->pub->huffval[ (int) (code + htbl->valoffset[l]) ]; -} - - -/* - * Check for a restart marker & resynchronize decoder. - * Returns FALSE if must suspend. - */ - -LOCAL(boolean) -process_restart (j_decompress_ptr cinfo) -{ - huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; - int ci; - - /* Throw away any unused bits remaining in bit buffer; */ - /* include any full bytes in next_marker's count of discarded bytes */ - cinfo->marker->discarded_bytes += entropy->bitstate.bits_left / 8; - entropy->bitstate.bits_left = 0; - - /* Advance past the RSTn marker */ - if (! (*cinfo->marker->read_restart_marker) (cinfo)) - return FALSE; - - /* Re-initialize DC predictions to 0 */ - for (ci = 0; ci < cinfo->comps_in_scan; ci++) - entropy->saved.last_dc_val[ci] = 0; - /* Re-init EOB run count, too */ - entropy->saved.EOBRUN = 0; - - /* Reset restart counter */ - entropy->restarts_to_go = cinfo->restart_interval; - - /* Reset out-of-data flag, unless read_restart_marker left us smack up - * against a marker. In that case we will end up treating the next data - * segment as empty, and we can avoid producing bogus output pixels by - * leaving the flag set. - */ - if (cinfo->unread_marker == 0) - entropy->insufficient_data = FALSE; - - return TRUE; -} - - -/* - * Huffman MCU decoding. - * Each of these routines decodes and returns one MCU's worth of - * Huffman-compressed coefficients. - * The coefficients are reordered from zigzag order into natural array order, - * but are not dequantized. - * - * The i'th block of the MCU is stored into the block pointed to by - * MCU_data[i]. WE ASSUME THIS AREA IS INITIALLY ZEROED BY THE CALLER. - * (Wholesale zeroing is usually a little faster than retail...) - * - * We return FALSE if data source requested suspension. In that case no - * changes have been made to permanent state. (Exception: some output - * coefficients may already have been assigned. This is harmless for - * spectral selection, since we'll just re-assign them on the next call. - * Successive approximation AC refinement has to be more careful, however.) - */ - -/* - * MCU decoding for DC initial scan (either spectral selection, - * or first pass of successive approximation). - */ - -METHODDEF(boolean) -decode_mcu_DC_first (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) -{ - huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; - int Al = cinfo->Al; - register int s, r; - int blkn, ci; - JBLOCKROW block; - BITREAD_STATE_VARS; - savable_state state; - d_derived_tbl * tbl; - jpeg_component_info * compptr; - - /* Process restart marker if needed; may have to suspend */ - if (cinfo->restart_interval) { - if (entropy->restarts_to_go == 0) - if (! process_restart(cinfo)) - return FALSE; - } - - /* If we've run out of data, just leave the MCU set to zeroes. - * This way, we return uniform gray for the remainder of the segment. - */ - if (! entropy->insufficient_data) { - - /* Load up working state */ - BITREAD_LOAD_STATE(cinfo,entropy->bitstate); - ASSIGN_STATE(state, entropy->saved); - - /* Outer loop handles each block in the MCU */ - - for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { - block = MCU_data[blkn]; - ci = cinfo->MCU_membership[blkn]; - compptr = cinfo->cur_comp_info[ci]; - tbl = entropy->derived_tbls[compptr->dc_tbl_no]; - - /* Decode a single block's worth of coefficients */ - - /* Section F.2.2.1: decode the DC coefficient difference */ - HUFF_DECODE(s, br_state, tbl, return FALSE, label1); - if (s) { - CHECK_BIT_BUFFER(br_state, s, return FALSE); - r = GET_BITS(s); - s = HUFF_EXTEND(r, s); - } - - /* Convert DC difference to actual value, update last_dc_val */ - s += state.last_dc_val[ci]; - state.last_dc_val[ci] = s; - /* Scale and output the coefficient (assumes jpeg_natural_order[0]=0) */ - (*block)[0] = (JCOEF) (s << Al); - } - - /* Completed MCU, so update state */ - BITREAD_SAVE_STATE(cinfo,entropy->bitstate); - ASSIGN_STATE(entropy->saved, state); - } - - /* Account for restart interval (no-op if not using restarts) */ - entropy->restarts_to_go--; - - return TRUE; -} - - -/* - * MCU decoding for AC initial scan (either spectral selection, - * or first pass of successive approximation). - */ - -METHODDEF(boolean) -decode_mcu_AC_first (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) -{ - huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; - register int s, k, r; - unsigned int EOBRUN; - int Se, Al; - const int * natural_order; - JBLOCKROW block; - BITREAD_STATE_VARS; - d_derived_tbl * tbl; - - /* Process restart marker if needed; may have to suspend */ - if (cinfo->restart_interval) { - if (entropy->restarts_to_go == 0) - if (! process_restart(cinfo)) - return FALSE; - } - - /* If we've run out of data, just leave the MCU set to zeroes. - * This way, we return uniform gray for the remainder of the segment. - */ - if (! entropy->insufficient_data) { - - Se = cinfo->Se; - Al = cinfo->Al; - natural_order = cinfo->natural_order; - - /* Load up working state. - * We can avoid loading/saving bitread state if in an EOB run. - */ - EOBRUN = entropy->saved.EOBRUN; /* only part of saved state we need */ - - /* There is always only one block per MCU */ - - if (EOBRUN > 0) /* if it's a band of zeroes... */ - EOBRUN--; /* ...process it now (we do nothing) */ - else { - BITREAD_LOAD_STATE(cinfo,entropy->bitstate); - block = MCU_data[0]; - tbl = entropy->ac_derived_tbl; - - for (k = cinfo->Ss; k <= Se; k++) { - HUFF_DECODE(s, br_state, tbl, return FALSE, label2); - r = s >> 4; - s &= 15; - if (s) { - k += r; - CHECK_BIT_BUFFER(br_state, s, return FALSE); - r = GET_BITS(s); - s = HUFF_EXTEND(r, s); - /* Scale and output coefficient in natural (dezigzagged) order */ - (*block)[natural_order[k]] = (JCOEF) (s << Al); - } else { - if (r == 15) { /* ZRL */ - k += 15; /* skip 15 zeroes in band */ - } else { /* EOBr, run length is 2^r + appended bits */ - EOBRUN = 1 << r; - if (r) { /* EOBr, r > 0 */ - CHECK_BIT_BUFFER(br_state, r, return FALSE); - r = GET_BITS(r); - EOBRUN += r; - } - EOBRUN--; /* this band is processed at this moment */ - break; /* force end-of-band */ - } - } - } - - BITREAD_SAVE_STATE(cinfo,entropy->bitstate); - } - - /* Completed MCU, so update state */ - entropy->saved.EOBRUN = EOBRUN; /* only part of saved state we need */ - } - - /* Account for restart interval (no-op if not using restarts) */ - entropy->restarts_to_go--; - - return TRUE; -} - - -/* - * MCU decoding for DC successive approximation refinement scan. - * Note: we assume such scans can be multi-component, although the spec - * is not very clear on the point. - */ - -METHODDEF(boolean) -decode_mcu_DC_refine (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) -{ - huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; - int p1 = 1 << cinfo->Al; /* 1 in the bit position being coded */ - int blkn; - JBLOCKROW block; - BITREAD_STATE_VARS; - - /* Process restart marker if needed; may have to suspend */ - if (cinfo->restart_interval) { - if (entropy->restarts_to_go == 0) - if (! process_restart(cinfo)) - return FALSE; - } - - /* Not worth the cycles to check insufficient_data here, - * since we will not change the data anyway if we read zeroes. - */ - - /* Load up working state */ - BITREAD_LOAD_STATE(cinfo,entropy->bitstate); - - /* Outer loop handles each block in the MCU */ - - for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { - block = MCU_data[blkn]; - - /* Encoded data is simply the next bit of the two's-complement DC value */ - CHECK_BIT_BUFFER(br_state, 1, return FALSE); - if (GET_BITS(1)) - (*block)[0] |= p1; - /* Note: since we use |=, repeating the assignment later is safe */ - } - - /* Completed MCU, so update state */ - BITREAD_SAVE_STATE(cinfo,entropy->bitstate); - - /* Account for restart interval (no-op if not using restarts) */ - entropy->restarts_to_go--; - - return TRUE; -} - - -/* - * MCU decoding for AC successive approximation refinement scan. - */ - -METHODDEF(boolean) -decode_mcu_AC_refine (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) -{ - huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; - register int s, k, r; - unsigned int EOBRUN; - int Se, p1, m1; - const int * natural_order; - JBLOCKROW block; - JCOEFPTR thiscoef; - BITREAD_STATE_VARS; - d_derived_tbl * tbl; - int num_newnz; - int newnz_pos[DCTSIZE2]; - - /* Process restart marker if needed; may have to suspend */ - if (cinfo->restart_interval) { - if (entropy->restarts_to_go == 0) - if (! process_restart(cinfo)) - return FALSE; - } - - /* If we've run out of data, don't modify the MCU. - */ - if (! entropy->insufficient_data) { - - Se = cinfo->Se; - p1 = 1 << cinfo->Al; /* 1 in the bit position being coded */ - m1 = (-1) << cinfo->Al; /* -1 in the bit position being coded */ - natural_order = cinfo->natural_order; - - /* Load up working state */ - BITREAD_LOAD_STATE(cinfo,entropy->bitstate); - EOBRUN = entropy->saved.EOBRUN; /* only part of saved state we need */ - - /* There is always only one block per MCU */ - block = MCU_data[0]; - tbl = entropy->ac_derived_tbl; - - /* If we are forced to suspend, we must undo the assignments to any newly - * nonzero coefficients in the block, because otherwise we'd get confused - * next time about which coefficients were already nonzero. - * But we need not undo addition of bits to already-nonzero coefficients; - * instead, we can test the current bit to see if we already did it. - */ - num_newnz = 0; - - /* initialize coefficient loop counter to start of band */ - k = cinfo->Ss; - - if (EOBRUN == 0) { - for (; k <= Se; k++) { - HUFF_DECODE(s, br_state, tbl, goto undoit, label3); - r = s >> 4; - s &= 15; - if (s) { - if (s != 1) /* size of new coef should always be 1 */ - WARNMS(cinfo, JWRN_HUFF_BAD_CODE); - CHECK_BIT_BUFFER(br_state, 1, goto undoit); - if (GET_BITS(1)) - s = p1; /* newly nonzero coef is positive */ - else - s = m1; /* newly nonzero coef is negative */ - } else { - if (r != 15) { - EOBRUN = 1 << r; /* EOBr, run length is 2^r + appended bits */ - if (r) { - CHECK_BIT_BUFFER(br_state, r, goto undoit); - r = GET_BITS(r); - EOBRUN += r; - } - break; /* rest of block is handled by EOB logic */ - } - /* note s = 0 for processing ZRL */ - } - /* Advance over already-nonzero coefs and r still-zero coefs, - * appending correction bits to the nonzeroes. A correction bit is 1 - * if the absolute value of the coefficient must be increased. - */ - do { - thiscoef = *block + natural_order[k]; - if (*thiscoef != 0) { - CHECK_BIT_BUFFER(br_state, 1, goto undoit); - if (GET_BITS(1)) { - if ((*thiscoef & p1) == 0) { /* do nothing if already set it */ - if (*thiscoef >= 0) - *thiscoef += p1; - else - *thiscoef += m1; - } - } - } else { - if (--r < 0) - break; /* reached target zero coefficient */ - } - k++; - } while (k <= Se); - if (s) { - int pos = natural_order[k]; - /* Output newly nonzero coefficient */ - (*block)[pos] = (JCOEF) s; - /* Remember its position in case we have to suspend */ - newnz_pos[num_newnz++] = pos; - } - } - } - - if (EOBRUN > 0) { - /* Scan any remaining coefficient positions after the end-of-band - * (the last newly nonzero coefficient, if any). Append a correction - * bit to each already-nonzero coefficient. A correction bit is 1 - * if the absolute value of the coefficient must be increased. - */ - for (; k <= Se; k++) { - thiscoef = *block + natural_order[k]; - if (*thiscoef != 0) { - CHECK_BIT_BUFFER(br_state, 1, goto undoit); - if (GET_BITS(1)) { - if ((*thiscoef & p1) == 0) { /* do nothing if already changed it */ - if (*thiscoef >= 0) - *thiscoef += p1; - else - *thiscoef += m1; - } - } - } - } - /* Count one block completed in EOB run */ - EOBRUN--; - } - - /* Completed MCU, so update state */ - BITREAD_SAVE_STATE(cinfo,entropy->bitstate); - entropy->saved.EOBRUN = EOBRUN; /* only part of saved state we need */ - } - - /* Account for restart interval (no-op if not using restarts) */ - entropy->restarts_to_go--; - - return TRUE; - -undoit: - /* Re-zero any output coefficients that we made newly nonzero */ - while (num_newnz > 0) - (*block)[newnz_pos[--num_newnz]] = 0; - - return FALSE; -} - - -/* - * Decode one MCU's worth of Huffman-compressed coefficients, - * partial blocks. - */ - -METHODDEF(boolean) -decode_mcu_sub (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) -{ - huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; - const int * natural_order; - int Se, blkn; - BITREAD_STATE_VARS; - savable_state state; - - /* Process restart marker if needed; may have to suspend */ - if (cinfo->restart_interval) { - if (entropy->restarts_to_go == 0) - if (! process_restart(cinfo)) - return FALSE; - } - - /* If we've run out of data, just leave the MCU set to zeroes. - * This way, we return uniform gray for the remainder of the segment. - */ - if (! entropy->insufficient_data) { - - natural_order = cinfo->natural_order; - Se = cinfo->lim_Se; - - /* Load up working state */ - BITREAD_LOAD_STATE(cinfo,entropy->bitstate); - ASSIGN_STATE(state, entropy->saved); - - /* Outer loop handles each block in the MCU */ - - for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { - JBLOCKROW block = MCU_data[blkn]; - d_derived_tbl * htbl; - register int s, k, r; - int coef_limit, ci; - - /* Decode a single block's worth of coefficients */ - - /* Section F.2.2.1: decode the DC coefficient difference */ - htbl = entropy->dc_cur_tbls[blkn]; - HUFF_DECODE(s, br_state, htbl, return FALSE, label1); - - htbl = entropy->ac_cur_tbls[blkn]; - k = 1; - coef_limit = entropy->coef_limit[blkn]; - if (coef_limit) { - /* Convert DC difference to actual value, update last_dc_val */ - if (s) { - CHECK_BIT_BUFFER(br_state, s, return FALSE); - r = GET_BITS(s); - s = HUFF_EXTEND(r, s); - } - ci = cinfo->MCU_membership[blkn]; - s += state.last_dc_val[ci]; - state.last_dc_val[ci] = s; - /* Output the DC coefficient */ - (*block)[0] = (JCOEF) s; - - /* Section F.2.2.2: decode the AC coefficients */ - /* Since zeroes are skipped, output area must be cleared beforehand */ - for (; k < coef_limit; k++) { - HUFF_DECODE(s, br_state, htbl, return FALSE, label2); - - r = s >> 4; - s &= 15; - - if (s) { - k += r; - CHECK_BIT_BUFFER(br_state, s, return FALSE); - r = GET_BITS(s); - s = HUFF_EXTEND(r, s); - /* Output coefficient in natural (dezigzagged) order. - * Note: the extra entries in natural_order[] will save us - * if k > Se, which could happen if the data is corrupted. - */ - (*block)[natural_order[k]] = (JCOEF) s; - } else { - if (r != 15) - goto EndOfBlock; - k += 15; - } - } - } else { - if (s) { - CHECK_BIT_BUFFER(br_state, s, return FALSE); - DROP_BITS(s); - } - } - - /* Section F.2.2.2: decode the AC coefficients */ - /* In this path we just discard the values */ - for (; k <= Se; k++) { - HUFF_DECODE(s, br_state, htbl, return FALSE, label3); - - r = s >> 4; - s &= 15; - - if (s) { - k += r; - CHECK_BIT_BUFFER(br_state, s, return FALSE); - DROP_BITS(s); - } else { - if (r != 15) - break; - k += 15; - } - } - - EndOfBlock: ; - } - - /* Completed MCU, so update state */ - BITREAD_SAVE_STATE(cinfo,entropy->bitstate); - ASSIGN_STATE(entropy->saved, state); - } - - /* Account for restart interval (no-op if not using restarts) */ - entropy->restarts_to_go--; - - return TRUE; -} - - -/* - * Decode one MCU's worth of Huffman-compressed coefficients, - * full-size blocks. - */ - -METHODDEF(boolean) -decode_mcu (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) -{ - huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; - int blkn; - BITREAD_STATE_VARS; - savable_state state; - - /* Process restart marker if needed; may have to suspend */ - if (cinfo->restart_interval) { - if (entropy->restarts_to_go == 0) - if (! process_restart(cinfo)) - return FALSE; - } - - /* If we've run out of data, just leave the MCU set to zeroes. - * This way, we return uniform gray for the remainder of the segment. - */ - if (! entropy->insufficient_data) { - - /* Load up working state */ - BITREAD_LOAD_STATE(cinfo,entropy->bitstate); - ASSIGN_STATE(state, entropy->saved); - - /* Outer loop handles each block in the MCU */ - - for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { - JBLOCKROW block = MCU_data[blkn]; - d_derived_tbl * htbl; - register int s, k, r; - int coef_limit, ci; - - /* Decode a single block's worth of coefficients */ - - /* Section F.2.2.1: decode the DC coefficient difference */ - htbl = entropy->dc_cur_tbls[blkn]; - HUFF_DECODE(s, br_state, htbl, return FALSE, label1); - - htbl = entropy->ac_cur_tbls[blkn]; - k = 1; - coef_limit = entropy->coef_limit[blkn]; - if (coef_limit) { - /* Convert DC difference to actual value, update last_dc_val */ - if (s) { - CHECK_BIT_BUFFER(br_state, s, return FALSE); - r = GET_BITS(s); - s = HUFF_EXTEND(r, s); - } - ci = cinfo->MCU_membership[blkn]; - s += state.last_dc_val[ci]; - state.last_dc_val[ci] = s; - /* Output the DC coefficient */ - (*block)[0] = (JCOEF) s; - - /* Section F.2.2.2: decode the AC coefficients */ - /* Since zeroes are skipped, output area must be cleared beforehand */ - for (; k < coef_limit; k++) { - HUFF_DECODE(s, br_state, htbl, return FALSE, label2); - - r = s >> 4; - s &= 15; - - if (s) { - k += r; - CHECK_BIT_BUFFER(br_state, s, return FALSE); - r = GET_BITS(s); - s = HUFF_EXTEND(r, s); - /* Output coefficient in natural (dezigzagged) order. - * Note: the extra entries in jpeg_natural_order[] will save us - * if k >= DCTSIZE2, which could happen if the data is corrupted. - */ - (*block)[jpeg_natural_order[k]] = (JCOEF) s; - } else { - if (r != 15) - goto EndOfBlock; - k += 15; - } - } - } else { - if (s) { - CHECK_BIT_BUFFER(br_state, s, return FALSE); - DROP_BITS(s); - } - } - - /* Section F.2.2.2: decode the AC coefficients */ - /* In this path we just discard the values */ - for (; k < DCTSIZE2; k++) { - HUFF_DECODE(s, br_state, htbl, return FALSE, label3); - - r = s >> 4; - s &= 15; - - if (s) { - k += r; - CHECK_BIT_BUFFER(br_state, s, return FALSE); - DROP_BITS(s); - } else { - if (r != 15) - break; - k += 15; - } - } - - EndOfBlock: ; - } - - /* Completed MCU, so update state */ - BITREAD_SAVE_STATE(cinfo,entropy->bitstate); - ASSIGN_STATE(entropy->saved, state); - } - - /* Account for restart interval (no-op if not using restarts) */ - entropy->restarts_to_go--; - - return TRUE; -} - - -/* - * Initialize for a Huffman-compressed scan. - */ - -METHODDEF(void) -start_pass_huff_decoder (j_decompress_ptr cinfo) -{ - huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; - int ci, blkn, tbl, i; - jpeg_component_info * compptr; - - if (cinfo->progressive_mode) { - /* Validate progressive scan parameters */ - if (cinfo->Ss == 0) { - if (cinfo->Se != 0) - goto bad; - } else { - /* need not check Ss/Se < 0 since they came from unsigned bytes */ - if (cinfo->Se < cinfo->Ss || cinfo->Se > cinfo->lim_Se) - goto bad; - /* AC scans may have only one component */ - if (cinfo->comps_in_scan != 1) - goto bad; - } - if (cinfo->Ah != 0) { - /* Successive approximation refinement scan: must have Al = Ah-1. */ - if (cinfo->Ah-1 != cinfo->Al) - goto bad; - } - if (cinfo->Al > 13) { /* need not check for < 0 */ - /* Arguably the maximum Al value should be less than 13 for 8-bit precision, - * but the spec doesn't say so, and we try to be liberal about what we - * accept. Note: large Al values could result in out-of-range DC - * coefficients during early scans, leading to bizarre displays due to - * overflows in the IDCT math. But we won't crash. - */ - bad: - ERREXIT4(cinfo, JERR_BAD_PROGRESSION, - cinfo->Ss, cinfo->Se, cinfo->Ah, cinfo->Al); - } - /* Update progression status, and verify that scan order is legal. - * Note that inter-scan inconsistencies are treated as warnings - * not fatal errors ... not clear if this is right way to behave. - */ - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - int coefi, cindex = cinfo->cur_comp_info[ci]->component_index; - int *coef_bit_ptr = & cinfo->coef_bits[cindex][0]; - if (cinfo->Ss && coef_bit_ptr[0] < 0) /* AC without prior DC scan */ - WARNMS2(cinfo, JWRN_BOGUS_PROGRESSION, cindex, 0); - for (coefi = cinfo->Ss; coefi <= cinfo->Se; coefi++) { - int expected = (coef_bit_ptr[coefi] < 0) ? 0 : coef_bit_ptr[coefi]; - if (cinfo->Ah != expected) - WARNMS2(cinfo, JWRN_BOGUS_PROGRESSION, cindex, coefi); - coef_bit_ptr[coefi] = cinfo->Al; - } - } - - /* Select MCU decoding routine */ - if (cinfo->Ah == 0) { - if (cinfo->Ss == 0) - entropy->pub.decode_mcu = decode_mcu_DC_first; - else - entropy->pub.decode_mcu = decode_mcu_AC_first; - } else { - if (cinfo->Ss == 0) - entropy->pub.decode_mcu = decode_mcu_DC_refine; - else - entropy->pub.decode_mcu = decode_mcu_AC_refine; - } - - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - compptr = cinfo->cur_comp_info[ci]; - /* Make sure requested tables are present, and compute derived tables. - * We may build same derived table more than once, but it's not expensive. - */ - if (cinfo->Ss == 0) { - if (cinfo->Ah == 0) { /* DC refinement needs no table */ - tbl = compptr->dc_tbl_no; - jpeg_make_d_derived_tbl(cinfo, TRUE, tbl, - & entropy->derived_tbls[tbl]); - } - } else { - tbl = compptr->ac_tbl_no; - jpeg_make_d_derived_tbl(cinfo, FALSE, tbl, - & entropy->derived_tbls[tbl]); - /* remember the single active table */ - entropy->ac_derived_tbl = entropy->derived_tbls[tbl]; - } - /* Initialize DC predictions to 0 */ - entropy->saved.last_dc_val[ci] = 0; - } - - /* Initialize private state variables */ - entropy->saved.EOBRUN = 0; - } else { - /* Check that the scan parameters Ss, Se, Ah/Al are OK for sequential JPEG. - * This ought to be an error condition, but we make it a warning because - * there are some baseline files out there with all zeroes in these bytes. - */ - if (cinfo->Ss != 0 || cinfo->Ah != 0 || cinfo->Al != 0 || - ((cinfo->is_baseline || cinfo->Se < DCTSIZE2) && - cinfo->Se != cinfo->lim_Se)) - WARNMS(cinfo, JWRN_NOT_SEQUENTIAL); - - /* Select MCU decoding routine */ - /* We retain the hard-coded case for full-size blocks. - * This is not necessary, but it appears that this version is slightly - * more performant in the given implementation. - * With an improved implementation we would prefer a single optimized - * function. - */ - if (cinfo->lim_Se != DCTSIZE2-1) - entropy->pub.decode_mcu = decode_mcu_sub; - else - entropy->pub.decode_mcu = decode_mcu; - - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - compptr = cinfo->cur_comp_info[ci]; - /* Compute derived values for Huffman tables */ - /* We may do this more than once for a table, but it's not expensive */ - tbl = compptr->dc_tbl_no; - jpeg_make_d_derived_tbl(cinfo, TRUE, tbl, - & entropy->dc_derived_tbls[tbl]); - if (cinfo->lim_Se) { /* AC needs no table when not present */ - tbl = compptr->ac_tbl_no; - jpeg_make_d_derived_tbl(cinfo, FALSE, tbl, - & entropy->ac_derived_tbls[tbl]); - } - /* Initialize DC predictions to 0 */ - entropy->saved.last_dc_val[ci] = 0; - } - - /* Precalculate decoding info for each block in an MCU of this scan */ - for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { - ci = cinfo->MCU_membership[blkn]; - compptr = cinfo->cur_comp_info[ci]; - /* Precalculate which table to use for each block */ - entropy->dc_cur_tbls[blkn] = entropy->dc_derived_tbls[compptr->dc_tbl_no]; - entropy->ac_cur_tbls[blkn] = entropy->ac_derived_tbls[compptr->ac_tbl_no]; - /* Decide whether we really care about the coefficient values */ - if (compptr->component_needed) { - ci = compptr->DCT_v_scaled_size; - i = compptr->DCT_h_scaled_size; - switch (cinfo->lim_Se) { - case (1*1-1): - entropy->coef_limit[blkn] = 1; - break; - case (2*2-1): - if (ci <= 0 || ci > 2) ci = 2; - if (i <= 0 || i > 2) i = 2; - entropy->coef_limit[blkn] = 1 + jpeg_zigzag_order2[ci - 1][i - 1]; - break; - case (3*3-1): - if (ci <= 0 || ci > 3) ci = 3; - if (i <= 0 || i > 3) i = 3; - entropy->coef_limit[blkn] = 1 + jpeg_zigzag_order3[ci - 1][i - 1]; - break; - case (4*4-1): - if (ci <= 0 || ci > 4) ci = 4; - if (i <= 0 || i > 4) i = 4; - entropy->coef_limit[blkn] = 1 + jpeg_zigzag_order4[ci - 1][i - 1]; - break; - case (5*5-1): - if (ci <= 0 || ci > 5) ci = 5; - if (i <= 0 || i > 5) i = 5; - entropy->coef_limit[blkn] = 1 + jpeg_zigzag_order5[ci - 1][i - 1]; - break; - case (6*6-1): - if (ci <= 0 || ci > 6) ci = 6; - if (i <= 0 || i > 6) i = 6; - entropy->coef_limit[blkn] = 1 + jpeg_zigzag_order6[ci - 1][i - 1]; - break; - case (7*7-1): - if (ci <= 0 || ci > 7) ci = 7; - if (i <= 0 || i > 7) i = 7; - entropy->coef_limit[blkn] = 1 + jpeg_zigzag_order7[ci - 1][i - 1]; - break; - default: - if (ci <= 0 || ci > 8) ci = 8; - if (i <= 0 || i > 8) i = 8; - entropy->coef_limit[blkn] = 1 + jpeg_zigzag_order[ci - 1][i - 1]; - break; - } - } else { - entropy->coef_limit[blkn] = 0; - } - } - } - - /* Initialize bitread state variables */ - entropy->bitstate.bits_left = 0; - entropy->bitstate.get_buffer = 0; /* unnecessary, but keeps Purify quiet */ - entropy->insufficient_data = FALSE; - - /* Initialize restart counter */ - entropy->restarts_to_go = cinfo->restart_interval; -} - - -/* - * Module initialization routine for Huffman entropy decoding. - */ - -GLOBAL(void) -jinit_huff_decoder (j_decompress_ptr cinfo) -{ - huff_entropy_ptr entropy; - int i; - - entropy = (huff_entropy_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(huff_entropy_decoder)); - cinfo->entropy = (struct jpeg_entropy_decoder *) entropy; - entropy->pub.start_pass = start_pass_huff_decoder; - - if (cinfo->progressive_mode) { - /* Create progression status table */ - int *coef_bit_ptr, ci; - cinfo->coef_bits = (int (*)[DCTSIZE2]) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - cinfo->num_components*DCTSIZE2*SIZEOF(int)); - coef_bit_ptr = & cinfo->coef_bits[0][0]; - for (ci = 0; ci < cinfo->num_components; ci++) - for (i = 0; i < DCTSIZE2; i++) - *coef_bit_ptr++ = -1; - - /* Mark derived tables unallocated */ - for (i = 0; i < NUM_HUFF_TBLS; i++) { - entropy->derived_tbls[i] = NULL; - } - } else { - /* Mark tables unallocated */ - for (i = 0; i < NUM_HUFF_TBLS; i++) { - entropy->dc_derived_tbls[i] = entropy->ac_derived_tbls[i] = NULL; - } - } -} diff --git a/jpeg/jdinput.c b/jpeg/jdinput.c deleted file mode 100755 index 2c5c717..0000000 --- a/jpeg/jdinput.c +++ /dev/null @@ -1,661 +0,0 @@ -/* - * jdinput.c - * - * Copyright (C) 1991-1997, Thomas G. Lane. - * Modified 2002-2009 by Guido Vollbeding. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains input control logic for the JPEG decompressor. - * These routines are concerned with controlling the decompressor's input - * processing (marker reading and coefficient decoding). The actual input - * reading is done in jdmarker.c, jdhuff.c, and jdarith.c. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* Private state */ - -typedef struct { - struct jpeg_input_controller pub; /* public fields */ - - int inheaders; /* Nonzero until first SOS is reached */ -} my_input_controller; - -typedef my_input_controller * my_inputctl_ptr; - - -/* Forward declarations */ -METHODDEF(int) consume_markers JPP((j_decompress_ptr cinfo)); - - -/* - * Routines to calculate various quantities related to the size of the image. - */ - - -/* - * Compute output image dimensions and related values. - * NOTE: this is exported for possible use by application. - * Hence it mustn't do anything that can't be done twice. - */ - -GLOBAL(void) -jpeg_core_output_dimensions (j_decompress_ptr cinfo) -/* Do computations that are needed before master selection phase. - * This function is used for transcoding and full decompression. - */ -{ -#ifdef IDCT_SCALING_SUPPORTED - int ci; - jpeg_component_info *compptr; - - /* Compute actual output image dimensions and DCT scaling choices. */ - if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom) { - /* Provide 1/block_size scaling */ - cinfo->output_width = (JDIMENSION) - jdiv_round_up((long) cinfo->image_width, (long) cinfo->block_size); - cinfo->output_height = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height, (long) cinfo->block_size); - cinfo->min_DCT_h_scaled_size = 1; - cinfo->min_DCT_v_scaled_size = 1; - } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 2) { - /* Provide 2/block_size scaling */ - cinfo->output_width = (JDIMENSION) - jdiv_round_up((long) cinfo->image_width * 2L, (long) cinfo->block_size); - cinfo->output_height = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height * 2L, (long) cinfo->block_size); - cinfo->min_DCT_h_scaled_size = 2; - cinfo->min_DCT_v_scaled_size = 2; - } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 3) { - /* Provide 3/block_size scaling */ - cinfo->output_width = (JDIMENSION) - jdiv_round_up((long) cinfo->image_width * 3L, (long) cinfo->block_size); - cinfo->output_height = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height * 3L, (long) cinfo->block_size); - cinfo->min_DCT_h_scaled_size = 3; - cinfo->min_DCT_v_scaled_size = 3; - } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 4) { - /* Provide 4/block_size scaling */ - cinfo->output_width = (JDIMENSION) - jdiv_round_up((long) cinfo->image_width * 4L, (long) cinfo->block_size); - cinfo->output_height = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height * 4L, (long) cinfo->block_size); - cinfo->min_DCT_h_scaled_size = 4; - cinfo->min_DCT_v_scaled_size = 4; - } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 5) { - /* Provide 5/block_size scaling */ - cinfo->output_width = (JDIMENSION) - jdiv_round_up((long) cinfo->image_width * 5L, (long) cinfo->block_size); - cinfo->output_height = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height * 5L, (long) cinfo->block_size); - cinfo->min_DCT_h_scaled_size = 5; - cinfo->min_DCT_v_scaled_size = 5; - } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 6) { - /* Provide 6/block_size scaling */ - cinfo->output_width = (JDIMENSION) - jdiv_round_up((long) cinfo->image_width * 6L, (long) cinfo->block_size); - cinfo->output_height = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height * 6L, (long) cinfo->block_size); - cinfo->min_DCT_h_scaled_size = 6; - cinfo->min_DCT_v_scaled_size = 6; - } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 7) { - /* Provide 7/block_size scaling */ - cinfo->output_width = (JDIMENSION) - jdiv_round_up((long) cinfo->image_width * 7L, (long) cinfo->block_size); - cinfo->output_height = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height * 7L, (long) cinfo->block_size); - cinfo->min_DCT_h_scaled_size = 7; - cinfo->min_DCT_v_scaled_size = 7; - } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 8) { - /* Provide 8/block_size scaling */ - cinfo->output_width = (JDIMENSION) - jdiv_round_up((long) cinfo->image_width * 8L, (long) cinfo->block_size); - cinfo->output_height = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height * 8L, (long) cinfo->block_size); - cinfo->min_DCT_h_scaled_size = 8; - cinfo->min_DCT_v_scaled_size = 8; - } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 9) { - /* Provide 9/block_size scaling */ - cinfo->output_width = (JDIMENSION) - jdiv_round_up((long) cinfo->image_width * 9L, (long) cinfo->block_size); - cinfo->output_height = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height * 9L, (long) cinfo->block_size); - cinfo->min_DCT_h_scaled_size = 9; - cinfo->min_DCT_v_scaled_size = 9; - } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 10) { - /* Provide 10/block_size scaling */ - cinfo->output_width = (JDIMENSION) - jdiv_round_up((long) cinfo->image_width * 10L, (long) cinfo->block_size); - cinfo->output_height = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height * 10L, (long) cinfo->block_size); - cinfo->min_DCT_h_scaled_size = 10; - cinfo->min_DCT_v_scaled_size = 10; - } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 11) { - /* Provide 11/block_size scaling */ - cinfo->output_width = (JDIMENSION) - jdiv_round_up((long) cinfo->image_width * 11L, (long) cinfo->block_size); - cinfo->output_height = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height * 11L, (long) cinfo->block_size); - cinfo->min_DCT_h_scaled_size = 11; - cinfo->min_DCT_v_scaled_size = 11; - } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 12) { - /* Provide 12/block_size scaling */ - cinfo->output_width = (JDIMENSION) - jdiv_round_up((long) cinfo->image_width * 12L, (long) cinfo->block_size); - cinfo->output_height = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height * 12L, (long) cinfo->block_size); - cinfo->min_DCT_h_scaled_size = 12; - cinfo->min_DCT_v_scaled_size = 12; - } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 13) { - /* Provide 13/block_size scaling */ - cinfo->output_width = (JDIMENSION) - jdiv_round_up((long) cinfo->image_width * 13L, (long) cinfo->block_size); - cinfo->output_height = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height * 13L, (long) cinfo->block_size); - cinfo->min_DCT_h_scaled_size = 13; - cinfo->min_DCT_v_scaled_size = 13; - } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 14) { - /* Provide 14/block_size scaling */ - cinfo->output_width = (JDIMENSION) - jdiv_round_up((long) cinfo->image_width * 14L, (long) cinfo->block_size); - cinfo->output_height = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height * 14L, (long) cinfo->block_size); - cinfo->min_DCT_h_scaled_size = 14; - cinfo->min_DCT_v_scaled_size = 14; - } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 15) { - /* Provide 15/block_size scaling */ - cinfo->output_width = (JDIMENSION) - jdiv_round_up((long) cinfo->image_width * 15L, (long) cinfo->block_size); - cinfo->output_height = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height * 15L, (long) cinfo->block_size); - cinfo->min_DCT_h_scaled_size = 15; - cinfo->min_DCT_v_scaled_size = 15; - } else { - /* Provide 16/block_size scaling */ - cinfo->output_width = (JDIMENSION) - jdiv_round_up((long) cinfo->image_width * 16L, (long) cinfo->block_size); - cinfo->output_height = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height * 16L, (long) cinfo->block_size); - cinfo->min_DCT_h_scaled_size = 16; - cinfo->min_DCT_v_scaled_size = 16; - } - - /* Recompute dimensions of components */ - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - compptr->DCT_h_scaled_size = cinfo->min_DCT_h_scaled_size; - compptr->DCT_v_scaled_size = cinfo->min_DCT_v_scaled_size; - } - -#else /* !IDCT_SCALING_SUPPORTED */ - - /* Hardwire it to "no scaling" */ - cinfo->output_width = cinfo->image_width; - cinfo->output_height = cinfo->image_height; - /* jdinput.c has already initialized DCT_scaled_size, - * and has computed unscaled downsampled_width and downsampled_height. - */ - -#endif /* IDCT_SCALING_SUPPORTED */ -} - - -LOCAL(void) -initial_setup (j_decompress_ptr cinfo) -/* Called once, when first SOS marker is reached */ -{ - int ci; - jpeg_component_info *compptr; - - /* Make sure image isn't bigger than I can handle */ - if ((long) cinfo->image_height > (long) JPEG_MAX_DIMENSION || - (long) cinfo->image_width > (long) JPEG_MAX_DIMENSION) - ERREXIT1(cinfo, JERR_IMAGE_TOO_BIG, (unsigned int) JPEG_MAX_DIMENSION); - - /* For now, precision must match compiled-in value... */ - if (cinfo->data_precision != BITS_IN_JSAMPLE) - ERREXIT1(cinfo, JERR_BAD_PRECISION, cinfo->data_precision); - - /* Check that number of components won't exceed internal array sizes */ - if (cinfo->num_components > MAX_COMPONENTS) - ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->num_components, - MAX_COMPONENTS); - - /* Compute maximum sampling factors; check factor validity */ - cinfo->max_h_samp_factor = 1; - cinfo->max_v_samp_factor = 1; - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - if (compptr->h_samp_factor<=0 || compptr->h_samp_factor>MAX_SAMP_FACTOR || - compptr->v_samp_factor<=0 || compptr->v_samp_factor>MAX_SAMP_FACTOR) - ERREXIT(cinfo, JERR_BAD_SAMPLING); - cinfo->max_h_samp_factor = MAX(cinfo->max_h_samp_factor, - compptr->h_samp_factor); - cinfo->max_v_samp_factor = MAX(cinfo->max_v_samp_factor, - compptr->v_samp_factor); - } - - /* Derive block_size, natural_order, and lim_Se */ - if (cinfo->is_baseline || (cinfo->progressive_mode && - cinfo->comps_in_scan)) { /* no pseudo SOS marker */ - cinfo->block_size = DCTSIZE; - cinfo->natural_order = jpeg_natural_order; - cinfo->lim_Se = DCTSIZE2-1; - } else - switch (cinfo->Se) { - case (1*1-1): - cinfo->block_size = 1; - cinfo->natural_order = jpeg_natural_order; /* not needed */ - cinfo->lim_Se = cinfo->Se; - break; - case (2*2-1): - cinfo->block_size = 2; - cinfo->natural_order = jpeg_natural_order2; - cinfo->lim_Se = cinfo->Se; - break; - case (3*3-1): - cinfo->block_size = 3; - cinfo->natural_order = jpeg_natural_order3; - cinfo->lim_Se = cinfo->Se; - break; - case (4*4-1): - cinfo->block_size = 4; - cinfo->natural_order = jpeg_natural_order4; - cinfo->lim_Se = cinfo->Se; - break; - case (5*5-1): - cinfo->block_size = 5; - cinfo->natural_order = jpeg_natural_order5; - cinfo->lim_Se = cinfo->Se; - break; - case (6*6-1): - cinfo->block_size = 6; - cinfo->natural_order = jpeg_natural_order6; - cinfo->lim_Se = cinfo->Se; - break; - case (7*7-1): - cinfo->block_size = 7; - cinfo->natural_order = jpeg_natural_order7; - cinfo->lim_Se = cinfo->Se; - break; - case (8*8-1): - cinfo->block_size = 8; - cinfo->natural_order = jpeg_natural_order; - cinfo->lim_Se = DCTSIZE2-1; - break; - case (9*9-1): - cinfo->block_size = 9; - cinfo->natural_order = jpeg_natural_order; - cinfo->lim_Se = DCTSIZE2-1; - break; - case (10*10-1): - cinfo->block_size = 10; - cinfo->natural_order = jpeg_natural_order; - cinfo->lim_Se = DCTSIZE2-1; - break; - case (11*11-1): - cinfo->block_size = 11; - cinfo->natural_order = jpeg_natural_order; - cinfo->lim_Se = DCTSIZE2-1; - break; - case (12*12-1): - cinfo->block_size = 12; - cinfo->natural_order = jpeg_natural_order; - cinfo->lim_Se = DCTSIZE2-1; - break; - case (13*13-1): - cinfo->block_size = 13; - cinfo->natural_order = jpeg_natural_order; - cinfo->lim_Se = DCTSIZE2-1; - break; - case (14*14-1): - cinfo->block_size = 14; - cinfo->natural_order = jpeg_natural_order; - cinfo->lim_Se = DCTSIZE2-1; - break; - case (15*15-1): - cinfo->block_size = 15; - cinfo->natural_order = jpeg_natural_order; - cinfo->lim_Se = DCTSIZE2-1; - break; - case (16*16-1): - cinfo->block_size = 16; - cinfo->natural_order = jpeg_natural_order; - cinfo->lim_Se = DCTSIZE2-1; - break; - default: - ERREXIT4(cinfo, JERR_BAD_PROGRESSION, - cinfo->Ss, cinfo->Se, cinfo->Ah, cinfo->Al); - break; - } - - /* We initialize DCT_scaled_size and min_DCT_scaled_size to block_size. - * In the full decompressor, - * this will be overridden by jpeg_calc_output_dimensions in jdmaster.c; - * but in the transcoder, - * jpeg_calc_output_dimensions is not used, so we must do it here. - */ - cinfo->min_DCT_h_scaled_size = cinfo->block_size; - cinfo->min_DCT_v_scaled_size = cinfo->block_size; - - /* Compute dimensions of components */ - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - compptr->DCT_h_scaled_size = cinfo->block_size; - compptr->DCT_v_scaled_size = cinfo->block_size; - /* Size in DCT blocks */ - compptr->width_in_blocks = (JDIMENSION) - jdiv_round_up((long) cinfo->image_width * (long) compptr->h_samp_factor, - (long) (cinfo->max_h_samp_factor * cinfo->block_size)); - compptr->height_in_blocks = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height * (long) compptr->v_samp_factor, - (long) (cinfo->max_v_samp_factor * cinfo->block_size)); - /* downsampled_width and downsampled_height will also be overridden by - * jdmaster.c if we are doing full decompression. The transcoder library - * doesn't use these values, but the calling application might. - */ - /* Size in samples */ - compptr->downsampled_width = (JDIMENSION) - jdiv_round_up((long) cinfo->image_width * (long) compptr->h_samp_factor, - (long) cinfo->max_h_samp_factor); - compptr->downsampled_height = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height * (long) compptr->v_samp_factor, - (long) cinfo->max_v_samp_factor); - /* Mark component needed, until color conversion says otherwise */ - compptr->component_needed = TRUE; - /* Mark no quantization table yet saved for component */ - compptr->quant_table = NULL; - } - - /* Compute number of fully interleaved MCU rows. */ - cinfo->total_iMCU_rows = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height, - (long) (cinfo->max_v_samp_factor * cinfo->block_size)); - - /* Decide whether file contains multiple scans */ - if (cinfo->comps_in_scan < cinfo->num_components || cinfo->progressive_mode) - cinfo->inputctl->has_multiple_scans = TRUE; - else - cinfo->inputctl->has_multiple_scans = FALSE; -} - - -LOCAL(void) -per_scan_setup (j_decompress_ptr cinfo) -/* Do computations that are needed before processing a JPEG scan */ -/* cinfo->comps_in_scan and cinfo->cur_comp_info[] were set from SOS marker */ -{ - int ci, mcublks, tmp; - jpeg_component_info *compptr; - - if (cinfo->comps_in_scan == 1) { - - /* Noninterleaved (single-component) scan */ - compptr = cinfo->cur_comp_info[0]; - - /* Overall image size in MCUs */ - cinfo->MCUs_per_row = compptr->width_in_blocks; - cinfo->MCU_rows_in_scan = compptr->height_in_blocks; - - /* For noninterleaved scan, always one block per MCU */ - compptr->MCU_width = 1; - compptr->MCU_height = 1; - compptr->MCU_blocks = 1; - compptr->MCU_sample_width = compptr->DCT_h_scaled_size; - compptr->last_col_width = 1; - /* For noninterleaved scans, it is convenient to define last_row_height - * as the number of block rows present in the last iMCU row. - */ - tmp = (int) (compptr->height_in_blocks % compptr->v_samp_factor); - if (tmp == 0) tmp = compptr->v_samp_factor; - compptr->last_row_height = tmp; - - /* Prepare array describing MCU composition */ - cinfo->blocks_in_MCU = 1; - cinfo->MCU_membership[0] = 0; - - } else { - - /* Interleaved (multi-component) scan */ - if (cinfo->comps_in_scan <= 0 || cinfo->comps_in_scan > MAX_COMPS_IN_SCAN) - ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->comps_in_scan, - MAX_COMPS_IN_SCAN); - - /* Overall image size in MCUs */ - cinfo->MCUs_per_row = (JDIMENSION) - jdiv_round_up((long) cinfo->image_width, - (long) (cinfo->max_h_samp_factor * cinfo->block_size)); - cinfo->MCU_rows_in_scan = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height, - (long) (cinfo->max_v_samp_factor * cinfo->block_size)); - - cinfo->blocks_in_MCU = 0; - - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - compptr = cinfo->cur_comp_info[ci]; - /* Sampling factors give # of blocks of component in each MCU */ - compptr->MCU_width = compptr->h_samp_factor; - compptr->MCU_height = compptr->v_samp_factor; - compptr->MCU_blocks = compptr->MCU_width * compptr->MCU_height; - compptr->MCU_sample_width = compptr->MCU_width * compptr->DCT_h_scaled_size; - /* Figure number of non-dummy blocks in last MCU column & row */ - tmp = (int) (compptr->width_in_blocks % compptr->MCU_width); - if (tmp == 0) tmp = compptr->MCU_width; - compptr->last_col_width = tmp; - tmp = (int) (compptr->height_in_blocks % compptr->MCU_height); - if (tmp == 0) tmp = compptr->MCU_height; - compptr->last_row_height = tmp; - /* Prepare array describing MCU composition */ - mcublks = compptr->MCU_blocks; - if (cinfo->blocks_in_MCU + mcublks > D_MAX_BLOCKS_IN_MCU) - ERREXIT(cinfo, JERR_BAD_MCU_SIZE); - while (mcublks-- > 0) { - cinfo->MCU_membership[cinfo->blocks_in_MCU++] = ci; - } - } - - } -} - - -/* - * Save away a copy of the Q-table referenced by each component present - * in the current scan, unless already saved during a prior scan. - * - * In a multiple-scan JPEG file, the encoder could assign different components - * the same Q-table slot number, but change table definitions between scans - * so that each component uses a different Q-table. (The IJG encoder is not - * currently capable of doing this, but other encoders might.) Since we want - * to be able to dequantize all the components at the end of the file, this - * means that we have to save away the table actually used for each component. - * We do this by copying the table at the start of the first scan containing - * the component. - * The JPEG spec prohibits the encoder from changing the contents of a Q-table - * slot between scans of a component using that slot. If the encoder does so - * anyway, this decoder will simply use the Q-table values that were current - * at the start of the first scan for the component. - * - * The decompressor output side looks only at the saved quant tables, - * not at the current Q-table slots. - */ - -LOCAL(void) -latch_quant_tables (j_decompress_ptr cinfo) -{ - int ci, qtblno; - jpeg_component_info *compptr; - JQUANT_TBL * qtbl; - - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - compptr = cinfo->cur_comp_info[ci]; - /* No work if we already saved Q-table for this component */ - if (compptr->quant_table != NULL) - continue; - /* Make sure specified quantization table is present */ - qtblno = compptr->quant_tbl_no; - if (qtblno < 0 || qtblno >= NUM_QUANT_TBLS || - cinfo->quant_tbl_ptrs[qtblno] == NULL) - ERREXIT1(cinfo, JERR_NO_QUANT_TABLE, qtblno); - /* OK, save away the quantization table */ - qtbl = (JQUANT_TBL *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(JQUANT_TBL)); - MEMCOPY(qtbl, cinfo->quant_tbl_ptrs[qtblno], SIZEOF(JQUANT_TBL)); - compptr->quant_table = qtbl; - } -} - - -/* - * Initialize the input modules to read a scan of compressed data. - * The first call to this is done by jdmaster.c after initializing - * the entire decompressor (during jpeg_start_decompress). - * Subsequent calls come from consume_markers, below. - */ - -METHODDEF(void) -start_input_pass (j_decompress_ptr cinfo) -{ - per_scan_setup(cinfo); - latch_quant_tables(cinfo); - (*cinfo->entropy->start_pass) (cinfo); - (*cinfo->coef->start_input_pass) (cinfo); - cinfo->inputctl->consume_input = cinfo->coef->consume_data; -} - - -/* - * Finish up after inputting a compressed-data scan. - * This is called by the coefficient controller after it's read all - * the expected data of the scan. - */ - -METHODDEF(void) -finish_input_pass (j_decompress_ptr cinfo) -{ - cinfo->inputctl->consume_input = consume_markers; -} - - -/* - * Read JPEG markers before, between, or after compressed-data scans. - * Change state as necessary when a new scan is reached. - * Return value is JPEG_SUSPENDED, JPEG_REACHED_SOS, or JPEG_REACHED_EOI. - * - * The consume_input method pointer points either here or to the - * coefficient controller's consume_data routine, depending on whether - * we are reading a compressed data segment or inter-segment markers. - * - * Note: This function should NOT return a pseudo SOS marker (with zero - * component number) to the caller. A pseudo marker received by - * read_markers is processed and then skipped for other markers. - */ - -METHODDEF(int) -consume_markers (j_decompress_ptr cinfo) -{ - my_inputctl_ptr inputctl = (my_inputctl_ptr) cinfo->inputctl; - int val; - - if (inputctl->pub.eoi_reached) /* After hitting EOI, read no further */ - return JPEG_REACHED_EOI; - - for (;;) { /* Loop to pass pseudo SOS marker */ - val = (*cinfo->marker->read_markers) (cinfo); - - switch (val) { - case JPEG_REACHED_SOS: /* Found SOS */ - if (inputctl->inheaders) { /* 1st SOS */ - if (inputctl->inheaders == 1) - initial_setup(cinfo); - if (cinfo->comps_in_scan == 0) { /* pseudo SOS marker */ - inputctl->inheaders = 2; - break; - } - inputctl->inheaders = 0; - /* Note: start_input_pass must be called by jdmaster.c - * before any more input can be consumed. jdapimin.c is - * responsible for enforcing this sequencing. - */ - } else { /* 2nd or later SOS marker */ - if (! inputctl->pub.has_multiple_scans) - ERREXIT(cinfo, JERR_EOI_EXPECTED); /* Oops, I wasn't expecting this! */ - if (cinfo->comps_in_scan == 0) /* unexpected pseudo SOS marker */ - break; - start_input_pass(cinfo); - } - return val; - case JPEG_REACHED_EOI: /* Found EOI */ - inputctl->pub.eoi_reached = TRUE; - if (inputctl->inheaders) { /* Tables-only datastream, apparently */ - if (cinfo->marker->saw_SOF) - ERREXIT(cinfo, JERR_SOF_NO_SOS); - } else { - /* Prevent infinite loop in coef ctlr's decompress_data routine - * if user set output_scan_number larger than number of scans. - */ - if (cinfo->output_scan_number > cinfo->input_scan_number) - cinfo->output_scan_number = cinfo->input_scan_number; - } - return val; - case JPEG_SUSPENDED: - return val; - default: - return val; - } - } -} - - -/* - * Reset state to begin a fresh datastream. - */ - -METHODDEF(void) -reset_input_controller (j_decompress_ptr cinfo) -{ - my_inputctl_ptr inputctl = (my_inputctl_ptr) cinfo->inputctl; - - inputctl->pub.consume_input = consume_markers; - inputctl->pub.has_multiple_scans = FALSE; /* "unknown" would be better */ - inputctl->pub.eoi_reached = FALSE; - inputctl->inheaders = 1; - /* Reset other modules */ - (*cinfo->err->reset_error_mgr) ((j_common_ptr) cinfo); - (*cinfo->marker->reset_marker_reader) (cinfo); - /* Reset progression state -- would be cleaner if entropy decoder did this */ - cinfo->coef_bits = NULL; -} - - -/* - * Initialize the input controller module. - * This is called only once, when the decompression object is created. - */ - -GLOBAL(void) -jinit_input_controller (j_decompress_ptr cinfo) -{ - my_inputctl_ptr inputctl; - - /* Create subobject in permanent pool */ - inputctl = (my_inputctl_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT, - SIZEOF(my_input_controller)); - cinfo->inputctl = (struct jpeg_input_controller *) inputctl; - /* Initialize method pointers */ - inputctl->pub.consume_input = consume_markers; - inputctl->pub.reset_input_controller = reset_input_controller; - inputctl->pub.start_input_pass = start_input_pass; - inputctl->pub.finish_input_pass = finish_input_pass; - /* Initialize state: can't use reset_input_controller since we don't - * want to try to reset other modules yet. - */ - inputctl->pub.has_multiple_scans = FALSE; /* "unknown" would be better */ - inputctl->pub.eoi_reached = FALSE; - inputctl->inheaders = 1; -} diff --git a/jpeg/jdmainct.c b/jpeg/jdmainct.c deleted file mode 100755 index 02723ca..0000000 --- a/jpeg/jdmainct.c +++ /dev/null @@ -1,512 +0,0 @@ -/* - * jdmainct.c - * - * Copyright (C) 1994-1996, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains the main buffer controller for decompression. - * The main buffer lies between the JPEG decompressor proper and the - * post-processor; it holds downsampled data in the JPEG colorspace. - * - * Note that this code is bypassed in raw-data mode, since the application - * supplies the equivalent of the main buffer in that case. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* - * In the current system design, the main buffer need never be a full-image - * buffer; any full-height buffers will be found inside the coefficient or - * postprocessing controllers. Nonetheless, the main controller is not - * trivial. Its responsibility is to provide context rows for upsampling/ - * rescaling, and doing this in an efficient fashion is a bit tricky. - * - * Postprocessor input data is counted in "row groups". A row group - * is defined to be (v_samp_factor * DCT_scaled_size / min_DCT_scaled_size) - * sample rows of each component. (We require DCT_scaled_size values to be - * chosen such that these numbers are integers. In practice DCT_scaled_size - * values will likely be powers of two, so we actually have the stronger - * condition that DCT_scaled_size / min_DCT_scaled_size is an integer.) - * Upsampling will typically produce max_v_samp_factor pixel rows from each - * row group (times any additional scale factor that the upsampler is - * applying). - * - * The coefficient controller will deliver data to us one iMCU row at a time; - * each iMCU row contains v_samp_factor * DCT_scaled_size sample rows, or - * exactly min_DCT_scaled_size row groups. (This amount of data corresponds - * to one row of MCUs when the image is fully interleaved.) Note that the - * number of sample rows varies across components, but the number of row - * groups does not. Some garbage sample rows may be included in the last iMCU - * row at the bottom of the image. - * - * Depending on the vertical scaling algorithm used, the upsampler may need - * access to the sample row(s) above and below its current input row group. - * The upsampler is required to set need_context_rows TRUE at global selection - * time if so. When need_context_rows is FALSE, this controller can simply - * obtain one iMCU row at a time from the coefficient controller and dole it - * out as row groups to the postprocessor. - * - * When need_context_rows is TRUE, this controller guarantees that the buffer - * passed to postprocessing contains at least one row group's worth of samples - * above and below the row group(s) being processed. Note that the context - * rows "above" the first passed row group appear at negative row offsets in - * the passed buffer. At the top and bottom of the image, the required - * context rows are manufactured by duplicating the first or last real sample - * row; this avoids having special cases in the upsampling inner loops. - * - * The amount of context is fixed at one row group just because that's a - * convenient number for this controller to work with. The existing - * upsamplers really only need one sample row of context. An upsampler - * supporting arbitrary output rescaling might wish for more than one row - * group of context when shrinking the image; tough, we don't handle that. - * (This is justified by the assumption that downsizing will be handled mostly - * by adjusting the DCT_scaled_size values, so that the actual scale factor at - * the upsample step needn't be much less than one.) - * - * To provide the desired context, we have to retain the last two row groups - * of one iMCU row while reading in the next iMCU row. (The last row group - * can't be processed until we have another row group for its below-context, - * and so we have to save the next-to-last group too for its above-context.) - * We could do this most simply by copying data around in our buffer, but - * that'd be very slow. We can avoid copying any data by creating a rather - * strange pointer structure. Here's how it works. We allocate a workspace - * consisting of M+2 row groups (where M = min_DCT_scaled_size is the number - * of row groups per iMCU row). We create two sets of redundant pointers to - * the workspace. Labeling the physical row groups 0 to M+1, the synthesized - * pointer lists look like this: - * M+1 M-1 - * master pointer --> 0 master pointer --> 0 - * 1 1 - * ... ... - * M-3 M-3 - * M-2 M - * M-1 M+1 - * M M-2 - * M+1 M-1 - * 0 0 - * We read alternate iMCU rows using each master pointer; thus the last two - * row groups of the previous iMCU row remain un-overwritten in the workspace. - * The pointer lists are set up so that the required context rows appear to - * be adjacent to the proper places when we pass the pointer lists to the - * upsampler. - * - * The above pictures describe the normal state of the pointer lists. - * At top and bottom of the image, we diddle the pointer lists to duplicate - * the first or last sample row as necessary (this is cheaper than copying - * sample rows around). - * - * This scheme breaks down if M < 2, ie, min_DCT_scaled_size is 1. In that - * situation each iMCU row provides only one row group so the buffering logic - * must be different (eg, we must read two iMCU rows before we can emit the - * first row group). For now, we simply do not support providing context - * rows when min_DCT_scaled_size is 1. That combination seems unlikely to - * be worth providing --- if someone wants a 1/8th-size preview, they probably - * want it quick and dirty, so a context-free upsampler is sufficient. - */ - - -/* Private buffer controller object */ - -typedef struct { - struct jpeg_d_main_controller pub; /* public fields */ - - /* Pointer to allocated workspace (M or M+2 row groups). */ - JSAMPARRAY buffer[MAX_COMPONENTS]; - - boolean buffer_full; /* Have we gotten an iMCU row from decoder? */ - JDIMENSION rowgroup_ctr; /* counts row groups output to postprocessor */ - - /* Remaining fields are only used in the context case. */ - - /* These are the master pointers to the funny-order pointer lists. */ - JSAMPIMAGE xbuffer[2]; /* pointers to weird pointer lists */ - - int whichptr; /* indicates which pointer set is now in use */ - int context_state; /* process_data state machine status */ - JDIMENSION rowgroups_avail; /* row groups available to postprocessor */ - JDIMENSION iMCU_row_ctr; /* counts iMCU rows to detect image top/bot */ -} my_main_controller; - -typedef my_main_controller * my_main_ptr; - -/* context_state values: */ -#define CTX_PREPARE_FOR_IMCU 0 /* need to prepare for MCU row */ -#define CTX_PROCESS_IMCU 1 /* feeding iMCU to postprocessor */ -#define CTX_POSTPONED_ROW 2 /* feeding postponed row group */ - - -/* Forward declarations */ -METHODDEF(void) process_data_simple_main - JPP((j_decompress_ptr cinfo, JSAMPARRAY output_buf, - JDIMENSION *out_row_ctr, JDIMENSION out_rows_avail)); -METHODDEF(void) process_data_context_main - JPP((j_decompress_ptr cinfo, JSAMPARRAY output_buf, - JDIMENSION *out_row_ctr, JDIMENSION out_rows_avail)); -#ifdef QUANT_2PASS_SUPPORTED -METHODDEF(void) process_data_crank_post - JPP((j_decompress_ptr cinfo, JSAMPARRAY output_buf, - JDIMENSION *out_row_ctr, JDIMENSION out_rows_avail)); -#endif - - -LOCAL(void) -alloc_funny_pointers (j_decompress_ptr cinfo) -/* Allocate space for the funny pointer lists. - * This is done only once, not once per pass. - */ -{ - my_main_ptr main = (my_main_ptr) cinfo->main; - int ci, rgroup; - int M = cinfo->min_DCT_v_scaled_size; - jpeg_component_info *compptr; - JSAMPARRAY xbuf; - - /* Get top-level space for component array pointers. - * We alloc both arrays with one call to save a few cycles. - */ - main->xbuffer[0] = (JSAMPIMAGE) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - cinfo->num_components * 2 * SIZEOF(JSAMPARRAY)); - main->xbuffer[1] = main->xbuffer[0] + cinfo->num_components; - - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - rgroup = (compptr->v_samp_factor * compptr->DCT_v_scaled_size) / - cinfo->min_DCT_v_scaled_size; /* height of a row group of component */ - /* Get space for pointer lists --- M+4 row groups in each list. - * We alloc both pointer lists with one call to save a few cycles. - */ - xbuf = (JSAMPARRAY) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - 2 * (rgroup * (M + 4)) * SIZEOF(JSAMPROW)); - xbuf += rgroup; /* want one row group at negative offsets */ - main->xbuffer[0][ci] = xbuf; - xbuf += rgroup * (M + 4); - main->xbuffer[1][ci] = xbuf; - } -} - - -LOCAL(void) -make_funny_pointers (j_decompress_ptr cinfo) -/* Create the funny pointer lists discussed in the comments above. - * The actual workspace is already allocated (in main->buffer), - * and the space for the pointer lists is allocated too. - * This routine just fills in the curiously ordered lists. - * This will be repeated at the beginning of each pass. - */ -{ - my_main_ptr main = (my_main_ptr) cinfo->main; - int ci, i, rgroup; - int M = cinfo->min_DCT_v_scaled_size; - jpeg_component_info *compptr; - JSAMPARRAY buf, xbuf0, xbuf1; - - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - rgroup = (compptr->v_samp_factor * compptr->DCT_v_scaled_size) / - cinfo->min_DCT_v_scaled_size; /* height of a row group of component */ - xbuf0 = main->xbuffer[0][ci]; - xbuf1 = main->xbuffer[1][ci]; - /* First copy the workspace pointers as-is */ - buf = main->buffer[ci]; - for (i = 0; i < rgroup * (M + 2); i++) { - xbuf0[i] = xbuf1[i] = buf[i]; - } - /* In the second list, put the last four row groups in swapped order */ - for (i = 0; i < rgroup * 2; i++) { - xbuf1[rgroup*(M-2) + i] = buf[rgroup*M + i]; - xbuf1[rgroup*M + i] = buf[rgroup*(M-2) + i]; - } - /* The wraparound pointers at top and bottom will be filled later - * (see set_wraparound_pointers, below). Initially we want the "above" - * pointers to duplicate the first actual data line. This only needs - * to happen in xbuffer[0]. - */ - for (i = 0; i < rgroup; i++) { - xbuf0[i - rgroup] = xbuf0[0]; - } - } -} - - -LOCAL(void) -set_wraparound_pointers (j_decompress_ptr cinfo) -/* Set up the "wraparound" pointers at top and bottom of the pointer lists. - * This changes the pointer list state from top-of-image to the normal state. - */ -{ - my_main_ptr main = (my_main_ptr) cinfo->main; - int ci, i, rgroup; - int M = cinfo->min_DCT_v_scaled_size; - jpeg_component_info *compptr; - JSAMPARRAY xbuf0, xbuf1; - - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - rgroup = (compptr->v_samp_factor * compptr->DCT_v_scaled_size) / - cinfo->min_DCT_v_scaled_size; /* height of a row group of component */ - xbuf0 = main->xbuffer[0][ci]; - xbuf1 = main->xbuffer[1][ci]; - for (i = 0; i < rgroup; i++) { - xbuf0[i - rgroup] = xbuf0[rgroup*(M+1) + i]; - xbuf1[i - rgroup] = xbuf1[rgroup*(M+1) + i]; - xbuf0[rgroup*(M+2) + i] = xbuf0[i]; - xbuf1[rgroup*(M+2) + i] = xbuf1[i]; - } - } -} - - -LOCAL(void) -set_bottom_pointers (j_decompress_ptr cinfo) -/* Change the pointer lists to duplicate the last sample row at the bottom - * of the image. whichptr indicates which xbuffer holds the final iMCU row. - * Also sets rowgroups_avail to indicate number of nondummy row groups in row. - */ -{ - my_main_ptr main = (my_main_ptr) cinfo->main; - int ci, i, rgroup, iMCUheight, rows_left; - jpeg_component_info *compptr; - JSAMPARRAY xbuf; - - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - /* Count sample rows in one iMCU row and in one row group */ - iMCUheight = compptr->v_samp_factor * compptr->DCT_v_scaled_size; - rgroup = iMCUheight / cinfo->min_DCT_v_scaled_size; - /* Count nondummy sample rows remaining for this component */ - rows_left = (int) (compptr->downsampled_height % (JDIMENSION) iMCUheight); - if (rows_left == 0) rows_left = iMCUheight; - /* Count nondummy row groups. Should get same answer for each component, - * so we need only do it once. - */ - if (ci == 0) { - main->rowgroups_avail = (JDIMENSION) ((rows_left-1) / rgroup + 1); - } - /* Duplicate the last real sample row rgroup*2 times; this pads out the - * last partial rowgroup and ensures at least one full rowgroup of context. - */ - xbuf = main->xbuffer[main->whichptr][ci]; - for (i = 0; i < rgroup * 2; i++) { - xbuf[rows_left + i] = xbuf[rows_left-1]; - } - } -} - - -/* - * Initialize for a processing pass. - */ - -METHODDEF(void) -start_pass_main (j_decompress_ptr cinfo, J_BUF_MODE pass_mode) -{ - my_main_ptr main = (my_main_ptr) cinfo->main; - - switch (pass_mode) { - case JBUF_PASS_THRU: - if (cinfo->upsample->need_context_rows) { - main->pub.process_data = process_data_context_main; - make_funny_pointers(cinfo); /* Create the xbuffer[] lists */ - main->whichptr = 0; /* Read first iMCU row into xbuffer[0] */ - main->context_state = CTX_PREPARE_FOR_IMCU; - main->iMCU_row_ctr = 0; - } else { - /* Simple case with no context needed */ - main->pub.process_data = process_data_simple_main; - } - main->buffer_full = FALSE; /* Mark buffer empty */ - main->rowgroup_ctr = 0; - break; -#ifdef QUANT_2PASS_SUPPORTED - case JBUF_CRANK_DEST: - /* For last pass of 2-pass quantization, just crank the postprocessor */ - main->pub.process_data = process_data_crank_post; - break; -#endif - default: - ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); - break; - } -} - - -/* - * Process some data. - * This handles the simple case where no context is required. - */ - -METHODDEF(void) -process_data_simple_main (j_decompress_ptr cinfo, - JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, - JDIMENSION out_rows_avail) -{ - my_main_ptr main = (my_main_ptr) cinfo->main; - JDIMENSION rowgroups_avail; - - /* Read input data if we haven't filled the main buffer yet */ - if (! main->buffer_full) { - if (! (*cinfo->coef->decompress_data) (cinfo, main->buffer)) - return; /* suspension forced, can do nothing more */ - main->buffer_full = TRUE; /* OK, we have an iMCU row to work with */ - } - - /* There are always min_DCT_scaled_size row groups in an iMCU row. */ - rowgroups_avail = (JDIMENSION) cinfo->min_DCT_v_scaled_size; - /* Note: at the bottom of the image, we may pass extra garbage row groups - * to the postprocessor. The postprocessor has to check for bottom - * of image anyway (at row resolution), so no point in us doing it too. - */ - - /* Feed the postprocessor */ - (*cinfo->post->post_process_data) (cinfo, main->buffer, - &main->rowgroup_ctr, rowgroups_avail, - output_buf, out_row_ctr, out_rows_avail); - - /* Has postprocessor consumed all the data yet? If so, mark buffer empty */ - if (main->rowgroup_ctr >= rowgroups_avail) { - main->buffer_full = FALSE; - main->rowgroup_ctr = 0; - } -} - - -/* - * Process some data. - * This handles the case where context rows must be provided. - */ - -METHODDEF(void) -process_data_context_main (j_decompress_ptr cinfo, - JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, - JDIMENSION out_rows_avail) -{ - my_main_ptr main = (my_main_ptr) cinfo->main; - - /* Read input data if we haven't filled the main buffer yet */ - if (! main->buffer_full) { - if (! (*cinfo->coef->decompress_data) (cinfo, - main->xbuffer[main->whichptr])) - return; /* suspension forced, can do nothing more */ - main->buffer_full = TRUE; /* OK, we have an iMCU row to work with */ - main->iMCU_row_ctr++; /* count rows received */ - } - - /* Postprocessor typically will not swallow all the input data it is handed - * in one call (due to filling the output buffer first). Must be prepared - * to exit and restart. This switch lets us keep track of how far we got. - * Note that each case falls through to the next on successful completion. - */ - switch (main->context_state) { - case CTX_POSTPONED_ROW: - /* Call postprocessor using previously set pointers for postponed row */ - (*cinfo->post->post_process_data) (cinfo, main->xbuffer[main->whichptr], - &main->rowgroup_ctr, main->rowgroups_avail, - output_buf, out_row_ctr, out_rows_avail); - if (main->rowgroup_ctr < main->rowgroups_avail) - return; /* Need to suspend */ - main->context_state = CTX_PREPARE_FOR_IMCU; - if (*out_row_ctr >= out_rows_avail) - return; /* Postprocessor exactly filled output buf */ - /*FALLTHROUGH*/ - case CTX_PREPARE_FOR_IMCU: - /* Prepare to process first M-1 row groups of this iMCU row */ - main->rowgroup_ctr = 0; - main->rowgroups_avail = (JDIMENSION) (cinfo->min_DCT_v_scaled_size - 1); - /* Check for bottom of image: if so, tweak pointers to "duplicate" - * the last sample row, and adjust rowgroups_avail to ignore padding rows. - */ - if (main->iMCU_row_ctr == cinfo->total_iMCU_rows) - set_bottom_pointers(cinfo); - main->context_state = CTX_PROCESS_IMCU; - /*FALLTHROUGH*/ - case CTX_PROCESS_IMCU: - /* Call postprocessor using previously set pointers */ - (*cinfo->post->post_process_data) (cinfo, main->xbuffer[main->whichptr], - &main->rowgroup_ctr, main->rowgroups_avail, - output_buf, out_row_ctr, out_rows_avail); - if (main->rowgroup_ctr < main->rowgroups_avail) - return; /* Need to suspend */ - /* After the first iMCU, change wraparound pointers to normal state */ - if (main->iMCU_row_ctr == 1) - set_wraparound_pointers(cinfo); - /* Prepare to load new iMCU row using other xbuffer list */ - main->whichptr ^= 1; /* 0=>1 or 1=>0 */ - main->buffer_full = FALSE; - /* Still need to process last row group of this iMCU row, */ - /* which is saved at index M+1 of the other xbuffer */ - main->rowgroup_ctr = (JDIMENSION) (cinfo->min_DCT_v_scaled_size + 1); - main->rowgroups_avail = (JDIMENSION) (cinfo->min_DCT_v_scaled_size + 2); - main->context_state = CTX_POSTPONED_ROW; - } -} - - -/* - * Process some data. - * Final pass of two-pass quantization: just call the postprocessor. - * Source data will be the postprocessor controller's internal buffer. - */ - -#ifdef QUANT_2PASS_SUPPORTED - -METHODDEF(void) -process_data_crank_post (j_decompress_ptr cinfo, - JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, - JDIMENSION out_rows_avail) -{ - (*cinfo->post->post_process_data) (cinfo, (JSAMPIMAGE) NULL, - (JDIMENSION *) NULL, (JDIMENSION) 0, - output_buf, out_row_ctr, out_rows_avail); -} - -#endif /* QUANT_2PASS_SUPPORTED */ - - -/* - * Initialize main buffer controller. - */ - -GLOBAL(void) -jinit_d_main_controller (j_decompress_ptr cinfo, boolean need_full_buffer) -{ - my_main_ptr main; - int ci, rgroup, ngroups; - jpeg_component_info *compptr; - - main = (my_main_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(my_main_controller)); - cinfo->main = (struct jpeg_d_main_controller *) main; - main->pub.start_pass = start_pass_main; - - if (need_full_buffer) /* shouldn't happen */ - ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); - - /* Allocate the workspace. - * ngroups is the number of row groups we need. - */ - if (cinfo->upsample->need_context_rows) { - if (cinfo->min_DCT_v_scaled_size < 2) /* unsupported, see comments above */ - ERREXIT(cinfo, JERR_NOTIMPL); - alloc_funny_pointers(cinfo); /* Alloc space for xbuffer[] lists */ - ngroups = cinfo->min_DCT_v_scaled_size + 2; - } else { - ngroups = cinfo->min_DCT_v_scaled_size; - } - - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - rgroup = (compptr->v_samp_factor * compptr->DCT_v_scaled_size) / - cinfo->min_DCT_v_scaled_size; /* height of a row group of component */ - main->buffer[ci] = (*cinfo->mem->alloc_sarray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, - compptr->width_in_blocks * compptr->DCT_h_scaled_size, - (JDIMENSION) (rgroup * ngroups)); - } -} diff --git a/jpeg/jdmarker.c b/jpeg/jdmarker.c deleted file mode 100755 index f2a9cc4..0000000 --- a/jpeg/jdmarker.c +++ /dev/null @@ -1,1406 +0,0 @@ -/* - * jdmarker.c - * - * Copyright (C) 1991-1998, Thomas G. Lane. - * Modified 2009 by Guido Vollbeding. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains routines to decode JPEG datastream markers. - * Most of the complexity arises from our desire to support input - * suspension: if not all of the data for a marker is available, - * we must exit back to the application. On resumption, we reprocess - * the marker. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -typedef enum { /* JPEG marker codes */ - M_SOF0 = 0xc0, - M_SOF1 = 0xc1, - M_SOF2 = 0xc2, - M_SOF3 = 0xc3, - - M_SOF5 = 0xc5, - M_SOF6 = 0xc6, - M_SOF7 = 0xc7, - - M_JPG = 0xc8, - M_SOF9 = 0xc9, - M_SOF10 = 0xca, - M_SOF11 = 0xcb, - - M_SOF13 = 0xcd, - M_SOF14 = 0xce, - M_SOF15 = 0xcf, - - M_DHT = 0xc4, - - M_DAC = 0xcc, - - M_RST0 = 0xd0, - M_RST1 = 0xd1, - M_RST2 = 0xd2, - M_RST3 = 0xd3, - M_RST4 = 0xd4, - M_RST5 = 0xd5, - M_RST6 = 0xd6, - M_RST7 = 0xd7, - - M_SOI = 0xd8, - M_EOI = 0xd9, - M_SOS = 0xda, - M_DQT = 0xdb, - M_DNL = 0xdc, - M_DRI = 0xdd, - M_DHP = 0xde, - M_EXP = 0xdf, - - M_APP0 = 0xe0, - M_APP1 = 0xe1, - M_APP2 = 0xe2, - M_APP3 = 0xe3, - M_APP4 = 0xe4, - M_APP5 = 0xe5, - M_APP6 = 0xe6, - M_APP7 = 0xe7, - M_APP8 = 0xe8, - M_APP9 = 0xe9, - M_APP10 = 0xea, - M_APP11 = 0xeb, - M_APP12 = 0xec, - M_APP13 = 0xed, - M_APP14 = 0xee, - M_APP15 = 0xef, - - M_JPG0 = 0xf0, - M_JPG13 = 0xfd, - M_COM = 0xfe, - - M_TEM = 0x01, - - M_ERROR = 0x100 -} JPEG_MARKER; - - -/* Private state */ - -typedef struct { - struct jpeg_marker_reader pub; /* public fields */ - - /* Application-overridable marker processing methods */ - jpeg_marker_parser_method process_COM; - jpeg_marker_parser_method process_APPn[16]; - - /* Limit on marker data length to save for each marker type */ - unsigned int length_limit_COM; - unsigned int length_limit_APPn[16]; - - /* Status of COM/APPn marker saving */ - jpeg_saved_marker_ptr cur_marker; /* NULL if not processing a marker */ - unsigned int bytes_read; /* data bytes read so far in marker */ - /* Note: cur_marker is not linked into marker_list until it's all read. */ -} my_marker_reader; - -typedef my_marker_reader * my_marker_ptr; - - -/* - * Macros for fetching data from the data source module. - * - * At all times, cinfo->src->next_input_byte and ->bytes_in_buffer reflect - * the current restart point; we update them only when we have reached a - * suitable place to restart if a suspension occurs. - */ - -/* Declare and initialize local copies of input pointer/count */ -#define INPUT_VARS(cinfo) \ - struct jpeg_source_mgr * datasrc = (cinfo)->src; \ - const JOCTET * next_input_byte = datasrc->next_input_byte; \ - size_t bytes_in_buffer = datasrc->bytes_in_buffer - -/* Unload the local copies --- do this only at a restart boundary */ -#define INPUT_SYNC(cinfo) \ - ( datasrc->next_input_byte = next_input_byte, \ - datasrc->bytes_in_buffer = bytes_in_buffer ) - -/* Reload the local copies --- used only in MAKE_BYTE_AVAIL */ -#define INPUT_RELOAD(cinfo) \ - ( next_input_byte = datasrc->next_input_byte, \ - bytes_in_buffer = datasrc->bytes_in_buffer ) - -/* Internal macro for INPUT_BYTE and INPUT_2BYTES: make a byte available. - * Note we do *not* do INPUT_SYNC before calling fill_input_buffer, - * but we must reload the local copies after a successful fill. - */ -#define MAKE_BYTE_AVAIL(cinfo,action) \ - if (bytes_in_buffer == 0) { \ - if (! (*datasrc->fill_input_buffer) (cinfo)) \ - { action; } \ - INPUT_RELOAD(cinfo); \ - } - -/* Read a byte into variable V. - * If must suspend, take the specified action (typically "return FALSE"). - */ -#define INPUT_BYTE(cinfo,V,action) \ - MAKESTMT( MAKE_BYTE_AVAIL(cinfo,action); \ - bytes_in_buffer--; \ - V = GETJOCTET(*next_input_byte++); ) - -/* As above, but read two bytes interpreted as an unsigned 16-bit integer. - * V should be declared unsigned int or perhaps INT32. - */ -#define INPUT_2BYTES(cinfo,V,action) \ - MAKESTMT( MAKE_BYTE_AVAIL(cinfo,action); \ - bytes_in_buffer--; \ - V = ((unsigned int) GETJOCTET(*next_input_byte++)) << 8; \ - MAKE_BYTE_AVAIL(cinfo,action); \ - bytes_in_buffer--; \ - V += GETJOCTET(*next_input_byte++); ) - - -/* - * Routines to process JPEG markers. - * - * Entry condition: JPEG marker itself has been read and its code saved - * in cinfo->unread_marker; input restart point is just after the marker. - * - * Exit: if return TRUE, have read and processed any parameters, and have - * updated the restart point to point after the parameters. - * If return FALSE, was forced to suspend before reaching end of - * marker parameters; restart point has not been moved. Same routine - * will be called again after application supplies more input data. - * - * This approach to suspension assumes that all of a marker's parameters - * can fit into a single input bufferload. This should hold for "normal" - * markers. Some COM/APPn markers might have large parameter segments - * that might not fit. If we are simply dropping such a marker, we use - * skip_input_data to get past it, and thereby put the problem on the - * source manager's shoulders. If we are saving the marker's contents - * into memory, we use a slightly different convention: when forced to - * suspend, the marker processor updates the restart point to the end of - * what it's consumed (ie, the end of the buffer) before returning FALSE. - * On resumption, cinfo->unread_marker still contains the marker code, - * but the data source will point to the next chunk of marker data. - * The marker processor must retain internal state to deal with this. - * - * Note that we don't bother to avoid duplicate trace messages if a - * suspension occurs within marker parameters. Other side effects - * require more care. - */ - - -LOCAL(boolean) -get_soi (j_decompress_ptr cinfo) -/* Process an SOI marker */ -{ - int i; - - TRACEMS(cinfo, 1, JTRC_SOI); - - if (cinfo->marker->saw_SOI) - ERREXIT(cinfo, JERR_SOI_DUPLICATE); - - /* Reset all parameters that are defined to be reset by SOI */ - - for (i = 0; i < NUM_ARITH_TBLS; i++) { - cinfo->arith_dc_L[i] = 0; - cinfo->arith_dc_U[i] = 1; - cinfo->arith_ac_K[i] = 5; - } - cinfo->restart_interval = 0; - - /* Set initial assumptions for colorspace etc */ - - cinfo->jpeg_color_space = JCS_UNKNOWN; - cinfo->CCIR601_sampling = FALSE; /* Assume non-CCIR sampling??? */ - - cinfo->saw_JFIF_marker = FALSE; - cinfo->JFIF_major_version = 1; /* set default JFIF APP0 values */ - cinfo->JFIF_minor_version = 1; - cinfo->density_unit = 0; - cinfo->X_density = 1; - cinfo->Y_density = 1; - cinfo->saw_Adobe_marker = FALSE; - cinfo->Adobe_transform = 0; - - cinfo->marker->saw_SOI = TRUE; - - return TRUE; -} - - -LOCAL(boolean) -get_sof (j_decompress_ptr cinfo, boolean is_baseline, boolean is_prog, - boolean is_arith) -/* Process a SOFn marker */ -{ - INT32 length; - int c, ci; - jpeg_component_info * compptr; - INPUT_VARS(cinfo); - - cinfo->is_baseline = is_baseline; - cinfo->progressive_mode = is_prog; - cinfo->arith_code = is_arith; - - INPUT_2BYTES(cinfo, length, return FALSE); - - INPUT_BYTE(cinfo, cinfo->data_precision, return FALSE); - INPUT_2BYTES(cinfo, cinfo->image_height, return FALSE); - INPUT_2BYTES(cinfo, cinfo->image_width, return FALSE); - INPUT_BYTE(cinfo, cinfo->num_components, return FALSE); - - length -= 8; - - TRACEMS4(cinfo, 1, JTRC_SOF, cinfo->unread_marker, - (int) cinfo->image_width, (int) cinfo->image_height, - cinfo->num_components); - - if (cinfo->marker->saw_SOF) - ERREXIT(cinfo, JERR_SOF_DUPLICATE); - - /* We don't support files in which the image height is initially specified */ - /* as 0 and is later redefined by DNL. As long as we have to check that, */ - /* might as well have a general sanity check. */ - if (cinfo->image_height <= 0 || cinfo->image_width <= 0 - || cinfo->num_components <= 0) - ERREXIT(cinfo, JERR_EMPTY_IMAGE); - - if (length != (cinfo->num_components * 3)) - ERREXIT(cinfo, JERR_BAD_LENGTH); - - if (cinfo->comp_info == NULL) /* do only once, even if suspend */ - cinfo->comp_info = (jpeg_component_info *) (*cinfo->mem->alloc_small) - ((j_common_ptr) cinfo, JPOOL_IMAGE, - cinfo->num_components * SIZEOF(jpeg_component_info)); - - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - compptr->component_index = ci; - INPUT_BYTE(cinfo, compptr->component_id, return FALSE); - INPUT_BYTE(cinfo, c, return FALSE); - compptr->h_samp_factor = (c >> 4) & 15; - compptr->v_samp_factor = (c ) & 15; - INPUT_BYTE(cinfo, compptr->quant_tbl_no, return FALSE); - - TRACEMS4(cinfo, 1, JTRC_SOF_COMPONENT, - compptr->component_id, compptr->h_samp_factor, - compptr->v_samp_factor, compptr->quant_tbl_no); - } - - cinfo->marker->saw_SOF = TRUE; - - INPUT_SYNC(cinfo); - return TRUE; -} - - -LOCAL(boolean) -get_sos (j_decompress_ptr cinfo) -/* Process a SOS marker */ -{ - INT32 length; - int i, ci, n, c, cc; - jpeg_component_info * compptr; - INPUT_VARS(cinfo); - - if (! cinfo->marker->saw_SOF) - ERREXIT(cinfo, JERR_SOS_NO_SOF); - - INPUT_2BYTES(cinfo, length, return FALSE); - - INPUT_BYTE(cinfo, n, return FALSE); /* Number of components */ - - TRACEMS1(cinfo, 1, JTRC_SOS, n); - - if (length != (n * 2 + 6) || n > MAX_COMPS_IN_SCAN || - (n == 0 && !cinfo->progressive_mode)) - /* pseudo SOS marker only allowed in progressive mode */ - ERREXIT(cinfo, JERR_BAD_LENGTH); - - cinfo->comps_in_scan = n; - - /* Collect the component-spec parameters */ - - for (i = 0; i < n; i++) { - INPUT_BYTE(cinfo, cc, return FALSE); - INPUT_BYTE(cinfo, c, return FALSE); - - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - if (cc == compptr->component_id) - goto id_found; - } - - ERREXIT1(cinfo, JERR_BAD_COMPONENT_ID, cc); - - id_found: - - cinfo->cur_comp_info[i] = compptr; - compptr->dc_tbl_no = (c >> 4) & 15; - compptr->ac_tbl_no = (c ) & 15; - - TRACEMS3(cinfo, 1, JTRC_SOS_COMPONENT, cc, - compptr->dc_tbl_no, compptr->ac_tbl_no); - } - - /* Collect the additional scan parameters Ss, Se, Ah/Al. */ - INPUT_BYTE(cinfo, c, return FALSE); - cinfo->Ss = c; - INPUT_BYTE(cinfo, c, return FALSE); - cinfo->Se = c; - INPUT_BYTE(cinfo, c, return FALSE); - cinfo->Ah = (c >> 4) & 15; - cinfo->Al = (c ) & 15; - - TRACEMS4(cinfo, 1, JTRC_SOS_PARAMS, cinfo->Ss, cinfo->Se, - cinfo->Ah, cinfo->Al); - - /* Prepare to scan data & restart markers */ - cinfo->marker->next_restart_num = 0; - - /* Count another (non-pseudo) SOS marker */ - if (n) cinfo->input_scan_number++; - - INPUT_SYNC(cinfo); - return TRUE; -} - - -#ifdef D_ARITH_CODING_SUPPORTED - -LOCAL(boolean) -get_dac (j_decompress_ptr cinfo) -/* Process a DAC marker */ -{ - INT32 length; - int index, val; - INPUT_VARS(cinfo); - - INPUT_2BYTES(cinfo, length, return FALSE); - length -= 2; - - while (length > 0) { - INPUT_BYTE(cinfo, index, return FALSE); - INPUT_BYTE(cinfo, val, return FALSE); - - length -= 2; - - TRACEMS2(cinfo, 1, JTRC_DAC, index, val); - - if (index < 0 || index >= (2*NUM_ARITH_TBLS)) - ERREXIT1(cinfo, JERR_DAC_INDEX, index); - - if (index >= NUM_ARITH_TBLS) { /* define AC table */ - cinfo->arith_ac_K[index-NUM_ARITH_TBLS] = (UINT8) val; - } else { /* define DC table */ - cinfo->arith_dc_L[index] = (UINT8) (val & 0x0F); - cinfo->arith_dc_U[index] = (UINT8) (val >> 4); - if (cinfo->arith_dc_L[index] > cinfo->arith_dc_U[index]) - ERREXIT1(cinfo, JERR_DAC_VALUE, val); - } - } - - if (length != 0) - ERREXIT(cinfo, JERR_BAD_LENGTH); - - INPUT_SYNC(cinfo); - return TRUE; -} - -#else /* ! D_ARITH_CODING_SUPPORTED */ - -#define get_dac(cinfo) skip_variable(cinfo) - -#endif /* D_ARITH_CODING_SUPPORTED */ - - -LOCAL(boolean) -get_dht (j_decompress_ptr cinfo) -/* Process a DHT marker */ -{ - INT32 length; - UINT8 bits[17]; - UINT8 huffval[256]; - int i, index, count; - JHUFF_TBL **htblptr; - INPUT_VARS(cinfo); - - INPUT_2BYTES(cinfo, length, return FALSE); - length -= 2; - - while (length > 16) { - INPUT_BYTE(cinfo, index, return FALSE); - - TRACEMS1(cinfo, 1, JTRC_DHT, index); - - bits[0] = 0; - count = 0; - for (i = 1; i <= 16; i++) { - INPUT_BYTE(cinfo, bits[i], return FALSE); - count += bits[i]; - } - - length -= 1 + 16; - - TRACEMS8(cinfo, 2, JTRC_HUFFBITS, - bits[1], bits[2], bits[3], bits[4], - bits[5], bits[6], bits[7], bits[8]); - TRACEMS8(cinfo, 2, JTRC_HUFFBITS, - bits[9], bits[10], bits[11], bits[12], - bits[13], bits[14], bits[15], bits[16]); - - /* Here we just do minimal validation of the counts to avoid walking - * off the end of our table space. jdhuff.c will check more carefully. - */ - if (count > 256 || ((INT32) count) > length) - ERREXIT(cinfo, JERR_BAD_HUFF_TABLE); - - for (i = 0; i < count; i++) - INPUT_BYTE(cinfo, huffval[i], return FALSE); - - length -= count; - - if (index & 0x10) { /* AC table definition */ - index -= 0x10; - htblptr = &cinfo->ac_huff_tbl_ptrs[index]; - } else { /* DC table definition */ - htblptr = &cinfo->dc_huff_tbl_ptrs[index]; - } - - if (index < 0 || index >= NUM_HUFF_TBLS) - ERREXIT1(cinfo, JERR_DHT_INDEX, index); - - if (*htblptr == NULL) - *htblptr = jpeg_alloc_huff_table((j_common_ptr) cinfo); - - MEMCOPY((*htblptr)->bits, bits, SIZEOF((*htblptr)->bits)); - MEMCOPY((*htblptr)->huffval, huffval, SIZEOF((*htblptr)->huffval)); - } - - if (length != 0) - ERREXIT(cinfo, JERR_BAD_LENGTH); - - INPUT_SYNC(cinfo); - return TRUE; -} - - -LOCAL(boolean) -get_dqt (j_decompress_ptr cinfo) -/* Process a DQT marker */ -{ - INT32 length, count, i; - int n, prec; - unsigned int tmp; - JQUANT_TBL *quant_ptr; - const int *natural_order; - INPUT_VARS(cinfo); - - INPUT_2BYTES(cinfo, length, return FALSE); - length -= 2; - - while (length > 0) { - length--; - INPUT_BYTE(cinfo, n, return FALSE); - prec = n >> 4; - n &= 0x0F; - - TRACEMS2(cinfo, 1, JTRC_DQT, n, prec); - - if (n >= NUM_QUANT_TBLS) - ERREXIT1(cinfo, JERR_DQT_INDEX, n); - - if (cinfo->quant_tbl_ptrs[n] == NULL) - cinfo->quant_tbl_ptrs[n] = jpeg_alloc_quant_table((j_common_ptr) cinfo); - quant_ptr = cinfo->quant_tbl_ptrs[n]; - - if (prec) { - if (length < DCTSIZE2 * 2) { - /* Initialize full table for safety. */ - for (i = 0; i < DCTSIZE2; i++) { - quant_ptr->quantval[i] = 1; - } - count = length >> 1; - } else - count = DCTSIZE2; - } else { - if (length < DCTSIZE2) { - /* Initialize full table for safety. */ - for (i = 0; i < DCTSIZE2; i++) { - quant_ptr->quantval[i] = 1; - } - count = length; - } else - count = DCTSIZE2; - } - - switch (count) { - case (2*2): natural_order = jpeg_natural_order2; break; - case (3*3): natural_order = jpeg_natural_order3; break; - case (4*4): natural_order = jpeg_natural_order4; break; - case (5*5): natural_order = jpeg_natural_order5; break; - case (6*6): natural_order = jpeg_natural_order6; break; - case (7*7): natural_order = jpeg_natural_order7; break; - default: natural_order = jpeg_natural_order; break; - } - - for (i = 0; i < count; i++) { - if (prec) - INPUT_2BYTES(cinfo, tmp, return FALSE); - else - INPUT_BYTE(cinfo, tmp, return FALSE); - /* We convert the zigzag-order table to natural array order. */ - quant_ptr->quantval[natural_order[i]] = (UINT16) tmp; - } - - if (cinfo->err->trace_level >= 2) { - for (i = 0; i < DCTSIZE2; i += 8) { - TRACEMS8(cinfo, 2, JTRC_QUANTVALS, - quant_ptr->quantval[i], quant_ptr->quantval[i+1], - quant_ptr->quantval[i+2], quant_ptr->quantval[i+3], - quant_ptr->quantval[i+4], quant_ptr->quantval[i+5], - quant_ptr->quantval[i+6], quant_ptr->quantval[i+7]); - } - } - - length -= count; - if (prec) length -= count; - } - - if (length != 0) - ERREXIT(cinfo, JERR_BAD_LENGTH); - - INPUT_SYNC(cinfo); - return TRUE; -} - - -LOCAL(boolean) -get_dri (j_decompress_ptr cinfo) -/* Process a DRI marker */ -{ - INT32 length; - unsigned int tmp; - INPUT_VARS(cinfo); - - INPUT_2BYTES(cinfo, length, return FALSE); - - if (length != 4) - ERREXIT(cinfo, JERR_BAD_LENGTH); - - INPUT_2BYTES(cinfo, tmp, return FALSE); - - TRACEMS1(cinfo, 1, JTRC_DRI, tmp); - - cinfo->restart_interval = tmp; - - INPUT_SYNC(cinfo); - return TRUE; -} - - -/* - * Routines for processing APPn and COM markers. - * These are either saved in memory or discarded, per application request. - * APP0 and APP14 are specially checked to see if they are - * JFIF and Adobe markers, respectively. - */ - -#define APP0_DATA_LEN 14 /* Length of interesting data in APP0 */ -#define APP14_DATA_LEN 12 /* Length of interesting data in APP14 */ -#define APPN_DATA_LEN 14 /* Must be the largest of the above!! */ - - -LOCAL(void) -examine_app0 (j_decompress_ptr cinfo, JOCTET FAR * data, - unsigned int datalen, INT32 remaining) -/* Examine first few bytes from an APP0. - * Take appropriate action if it is a JFIF marker. - * datalen is # of bytes at data[], remaining is length of rest of marker data. - */ -{ - INT32 totallen = (INT32) datalen + remaining; - - if (datalen >= APP0_DATA_LEN && - GETJOCTET(data[0]) == 0x4A && - GETJOCTET(data[1]) == 0x46 && - GETJOCTET(data[2]) == 0x49 && - GETJOCTET(data[3]) == 0x46 && - GETJOCTET(data[4]) == 0) { - /* Found JFIF APP0 marker: save info */ - cinfo->saw_JFIF_marker = TRUE; - cinfo->JFIF_major_version = GETJOCTET(data[5]); - cinfo->JFIF_minor_version = GETJOCTET(data[6]); - cinfo->density_unit = GETJOCTET(data[7]); - cinfo->X_density = (GETJOCTET(data[8]) << 8) + GETJOCTET(data[9]); - cinfo->Y_density = (GETJOCTET(data[10]) << 8) + GETJOCTET(data[11]); - /* Check version. - * Major version must be 1, anything else signals an incompatible change. - * (We used to treat this as an error, but now it's a nonfatal warning, - * because some bozo at Hijaak couldn't read the spec.) - * Minor version should be 0..2, but process anyway if newer. - */ - if (cinfo->JFIF_major_version != 1) - WARNMS2(cinfo, JWRN_JFIF_MAJOR, - cinfo->JFIF_major_version, cinfo->JFIF_minor_version); - /* Generate trace messages */ - TRACEMS5(cinfo, 1, JTRC_JFIF, - cinfo->JFIF_major_version, cinfo->JFIF_minor_version, - cinfo->X_density, cinfo->Y_density, cinfo->density_unit); - /* Validate thumbnail dimensions and issue appropriate messages */ - if (GETJOCTET(data[12]) | GETJOCTET(data[13])) - TRACEMS2(cinfo, 1, JTRC_JFIF_THUMBNAIL, - GETJOCTET(data[12]), GETJOCTET(data[13])); - totallen -= APP0_DATA_LEN; - if (totallen != - ((INT32)GETJOCTET(data[12]) * (INT32)GETJOCTET(data[13]) * (INT32) 3)) - TRACEMS1(cinfo, 1, JTRC_JFIF_BADTHUMBNAILSIZE, (int) totallen); - } else if (datalen >= 6 && - GETJOCTET(data[0]) == 0x4A && - GETJOCTET(data[1]) == 0x46 && - GETJOCTET(data[2]) == 0x58 && - GETJOCTET(data[3]) == 0x58 && - GETJOCTET(data[4]) == 0) { - /* Found JFIF "JFXX" extension APP0 marker */ - /* The library doesn't actually do anything with these, - * but we try to produce a helpful trace message. - */ - switch (GETJOCTET(data[5])) { - case 0x10: - TRACEMS1(cinfo, 1, JTRC_THUMB_JPEG, (int) totallen); - break; - case 0x11: - TRACEMS1(cinfo, 1, JTRC_THUMB_PALETTE, (int) totallen); - break; - case 0x13: - TRACEMS1(cinfo, 1, JTRC_THUMB_RGB, (int) totallen); - break; - default: - TRACEMS2(cinfo, 1, JTRC_JFIF_EXTENSION, - GETJOCTET(data[5]), (int) totallen); - break; - } - } else { - /* Start of APP0 does not match "JFIF" or "JFXX", or too short */ - TRACEMS1(cinfo, 1, JTRC_APP0, (int) totallen); - } -} - - -LOCAL(void) -examine_app14 (j_decompress_ptr cinfo, JOCTET FAR * data, - unsigned int datalen, INT32 remaining) -/* Examine first few bytes from an APP14. - * Take appropriate action if it is an Adobe marker. - * datalen is # of bytes at data[], remaining is length of rest of marker data. - */ -{ - unsigned int version, flags0, flags1, transform; - - if (datalen >= APP14_DATA_LEN && - GETJOCTET(data[0]) == 0x41 && - GETJOCTET(data[1]) == 0x64 && - GETJOCTET(data[2]) == 0x6F && - GETJOCTET(data[3]) == 0x62 && - GETJOCTET(data[4]) == 0x65) { - /* Found Adobe APP14 marker */ - version = (GETJOCTET(data[5]) << 8) + GETJOCTET(data[6]); - flags0 = (GETJOCTET(data[7]) << 8) + GETJOCTET(data[8]); - flags1 = (GETJOCTET(data[9]) << 8) + GETJOCTET(data[10]); - transform = GETJOCTET(data[11]); - TRACEMS4(cinfo, 1, JTRC_ADOBE, version, flags0, flags1, transform); - cinfo->saw_Adobe_marker = TRUE; - cinfo->Adobe_transform = (UINT8) transform; - } else { - /* Start of APP14 does not match "Adobe", or too short */ - TRACEMS1(cinfo, 1, JTRC_APP14, (int) (datalen + remaining)); - } -} - - -METHODDEF(boolean) -get_interesting_appn (j_decompress_ptr cinfo) -/* Process an APP0 or APP14 marker without saving it */ -{ - INT32 length; - JOCTET b[APPN_DATA_LEN]; - unsigned int i, numtoread; - INPUT_VARS(cinfo); - - INPUT_2BYTES(cinfo, length, return FALSE); - length -= 2; - - /* get the interesting part of the marker data */ - if (length >= APPN_DATA_LEN) - numtoread = APPN_DATA_LEN; - else if (length > 0) - numtoread = (unsigned int) length; - else - numtoread = 0; - for (i = 0; i < numtoread; i++) - INPUT_BYTE(cinfo, b[i], return FALSE); - length -= numtoread; - - /* process it */ - switch (cinfo->unread_marker) { - case M_APP0: - examine_app0(cinfo, (JOCTET FAR *) b, numtoread, length); - break; - case M_APP14: - examine_app14(cinfo, (JOCTET FAR *) b, numtoread, length); - break; - default: - /* can't get here unless jpeg_save_markers chooses wrong processor */ - ERREXIT1(cinfo, JERR_UNKNOWN_MARKER, cinfo->unread_marker); - break; - } - - /* skip any remaining data -- could be lots */ - INPUT_SYNC(cinfo); - if (length > 0) - (*cinfo->src->skip_input_data) (cinfo, (long) length); - - return TRUE; -} - - -#ifdef SAVE_MARKERS_SUPPORTED - -METHODDEF(boolean) -save_marker (j_decompress_ptr cinfo) -/* Save an APPn or COM marker into the marker list */ -{ - my_marker_ptr marker = (my_marker_ptr) cinfo->marker; - jpeg_saved_marker_ptr cur_marker = marker->cur_marker; - unsigned int bytes_read, data_length; - JOCTET FAR * data; - INT32 length = 0; - INPUT_VARS(cinfo); - - if (cur_marker == NULL) { - /* begin reading a marker */ - INPUT_2BYTES(cinfo, length, return FALSE); - length -= 2; - if (length >= 0) { /* watch out for bogus length word */ - /* figure out how much we want to save */ - unsigned int limit; - if (cinfo->unread_marker == (int) M_COM) - limit = marker->length_limit_COM; - else - limit = marker->length_limit_APPn[cinfo->unread_marker - (int) M_APP0]; - if ((unsigned int) length < limit) - limit = (unsigned int) length; - /* allocate and initialize the marker item */ - cur_marker = (jpeg_saved_marker_ptr) - (*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(struct jpeg_marker_struct) + limit); - cur_marker->next = NULL; - cur_marker->marker = (UINT8) cinfo->unread_marker; - cur_marker->original_length = (unsigned int) length; - cur_marker->data_length = limit; - /* data area is just beyond the jpeg_marker_struct */ - data = cur_marker->data = (JOCTET FAR *) (cur_marker + 1); - marker->cur_marker = cur_marker; - marker->bytes_read = 0; - bytes_read = 0; - data_length = limit; - } else { - /* deal with bogus length word */ - bytes_read = data_length = 0; - data = NULL; - } - } else { - /* resume reading a marker */ - bytes_read = marker->bytes_read; - data_length = cur_marker->data_length; - data = cur_marker->data + bytes_read; - } - - while (bytes_read < data_length) { - INPUT_SYNC(cinfo); /* move the restart point to here */ - marker->bytes_read = bytes_read; - /* If there's not at least one byte in buffer, suspend */ - MAKE_BYTE_AVAIL(cinfo, return FALSE); - /* Copy bytes with reasonable rapidity */ - while (bytes_read < data_length && bytes_in_buffer > 0) { - *data++ = *next_input_byte++; - bytes_in_buffer--; - bytes_read++; - } - } - - /* Done reading what we want to read */ - if (cur_marker != NULL) { /* will be NULL if bogus length word */ - /* Add new marker to end of list */ - if (cinfo->marker_list == NULL) { - cinfo->marker_list = cur_marker; - } else { - jpeg_saved_marker_ptr prev = cinfo->marker_list; - while (prev->next != NULL) - prev = prev->next; - prev->next = cur_marker; - } - /* Reset pointer & calc remaining data length */ - data = cur_marker->data; - length = cur_marker->original_length - data_length; - } - /* Reset to initial state for next marker */ - marker->cur_marker = NULL; - - /* Process the marker if interesting; else just make a generic trace msg */ - switch (cinfo->unread_marker) { - case M_APP0: - examine_app0(cinfo, data, data_length, length); - break; - case M_APP14: - examine_app14(cinfo, data, data_length, length); - break; - default: - TRACEMS2(cinfo, 1, JTRC_MISC_MARKER, cinfo->unread_marker, - (int) (data_length + length)); - break; - } - - /* skip any remaining data -- could be lots */ - INPUT_SYNC(cinfo); /* do before skip_input_data */ - if (length > 0) - (*cinfo->src->skip_input_data) (cinfo, (long) length); - - return TRUE; -} - -#endif /* SAVE_MARKERS_SUPPORTED */ - - -METHODDEF(boolean) -skip_variable (j_decompress_ptr cinfo) -/* Skip over an unknown or uninteresting variable-length marker */ -{ - INT32 length; - INPUT_VARS(cinfo); - - INPUT_2BYTES(cinfo, length, return FALSE); - length -= 2; - - TRACEMS2(cinfo, 1, JTRC_MISC_MARKER, cinfo->unread_marker, (int) length); - - INPUT_SYNC(cinfo); /* do before skip_input_data */ - if (length > 0) - (*cinfo->src->skip_input_data) (cinfo, (long) length); - - return TRUE; -} - - -/* - * Find the next JPEG marker, save it in cinfo->unread_marker. - * Returns FALSE if had to suspend before reaching a marker; - * in that case cinfo->unread_marker is unchanged. - * - * Note that the result might not be a valid marker code, - * but it will never be 0 or FF. - */ - -LOCAL(boolean) -next_marker (j_decompress_ptr cinfo) -{ - int c; - INPUT_VARS(cinfo); - - for (;;) { - INPUT_BYTE(cinfo, c, return FALSE); - /* Skip any non-FF bytes. - * This may look a bit inefficient, but it will not occur in a valid file. - * We sync after each discarded byte so that a suspending data source - * can discard the byte from its buffer. - */ - while (c != 0xFF) { - cinfo->marker->discarded_bytes++; - INPUT_SYNC(cinfo); - INPUT_BYTE(cinfo, c, return FALSE); - } - /* This loop swallows any duplicate FF bytes. Extra FFs are legal as - * pad bytes, so don't count them in discarded_bytes. We assume there - * will not be so many consecutive FF bytes as to overflow a suspending - * data source's input buffer. - */ - do { - INPUT_BYTE(cinfo, c, return FALSE); - } while (c == 0xFF); - if (c != 0) - break; /* found a valid marker, exit loop */ - /* Reach here if we found a stuffed-zero data sequence (FF/00). - * Discard it and loop back to try again. - */ - cinfo->marker->discarded_bytes += 2; - INPUT_SYNC(cinfo); - } - - if (cinfo->marker->discarded_bytes != 0) { - WARNMS2(cinfo, JWRN_EXTRANEOUS_DATA, cinfo->marker->discarded_bytes, c); - cinfo->marker->discarded_bytes = 0; - } - - cinfo->unread_marker = c; - - INPUT_SYNC(cinfo); - return TRUE; -} - - -LOCAL(boolean) -first_marker (j_decompress_ptr cinfo) -/* Like next_marker, but used to obtain the initial SOI marker. */ -/* For this marker, we do not allow preceding garbage or fill; otherwise, - * we might well scan an entire input file before realizing it ain't JPEG. - * If an application wants to process non-JFIF files, it must seek to the - * SOI before calling the JPEG library. - */ -{ - int c, c2; - INPUT_VARS(cinfo); - - INPUT_BYTE(cinfo, c, return FALSE); - INPUT_BYTE(cinfo, c2, return FALSE); - if (c != 0xFF || c2 != (int) M_SOI) - ERREXIT2(cinfo, JERR_NO_SOI, c, c2); - - cinfo->unread_marker = c2; - - INPUT_SYNC(cinfo); - return TRUE; -} - - -/* - * Read markers until SOS or EOI. - * - * Returns same codes as are defined for jpeg_consume_input: - * JPEG_SUSPENDED, JPEG_REACHED_SOS, or JPEG_REACHED_EOI. - * - * Note: This function may return a pseudo SOS marker (with zero - * component number) for treat by input controller's consume_input. - * consume_input itself should filter out (skip) the pseudo marker - * after processing for the caller. - */ - -METHODDEF(int) -read_markers (j_decompress_ptr cinfo) -{ - /* Outer loop repeats once for each marker. */ - for (;;) { - /* Collect the marker proper, unless we already did. */ - /* NB: first_marker() enforces the requirement that SOI appear first. */ - if (cinfo->unread_marker == 0) { - if (! cinfo->marker->saw_SOI) { - if (! first_marker(cinfo)) - return JPEG_SUSPENDED; - } else { - if (! next_marker(cinfo)) - return JPEG_SUSPENDED; - } - } - /* At this point cinfo->unread_marker contains the marker code and the - * input point is just past the marker proper, but before any parameters. - * A suspension will cause us to return with this state still true. - */ - switch (cinfo->unread_marker) { - case M_SOI: - if (! get_soi(cinfo)) - return JPEG_SUSPENDED; - break; - - case M_SOF0: /* Baseline */ - if (! get_sof(cinfo, TRUE, FALSE, FALSE)) - return JPEG_SUSPENDED; - break; - - case M_SOF1: /* Extended sequential, Huffman */ - if (! get_sof(cinfo, FALSE, FALSE, FALSE)) - return JPEG_SUSPENDED; - break; - - case M_SOF2: /* Progressive, Huffman */ - if (! get_sof(cinfo, FALSE, TRUE, FALSE)) - return JPEG_SUSPENDED; - break; - - case M_SOF9: /* Extended sequential, arithmetic */ - if (! get_sof(cinfo, FALSE, FALSE, TRUE)) - return JPEG_SUSPENDED; - break; - - case M_SOF10: /* Progressive, arithmetic */ - if (! get_sof(cinfo, FALSE, TRUE, TRUE)) - return JPEG_SUSPENDED; - break; - - /* Currently unsupported SOFn types */ - case M_SOF3: /* Lossless, Huffman */ - case M_SOF5: /* Differential sequential, Huffman */ - case M_SOF6: /* Differential progressive, Huffman */ - case M_SOF7: /* Differential lossless, Huffman */ - case M_JPG: /* Reserved for JPEG extensions */ - case M_SOF11: /* Lossless, arithmetic */ - case M_SOF13: /* Differential sequential, arithmetic */ - case M_SOF14: /* Differential progressive, arithmetic */ - case M_SOF15: /* Differential lossless, arithmetic */ - ERREXIT1(cinfo, JERR_SOF_UNSUPPORTED, cinfo->unread_marker); - break; - - case M_SOS: - if (! get_sos(cinfo)) - return JPEG_SUSPENDED; - cinfo->unread_marker = 0; /* processed the marker */ - return JPEG_REACHED_SOS; - - case M_EOI: - TRACEMS(cinfo, 1, JTRC_EOI); - cinfo->unread_marker = 0; /* processed the marker */ - return JPEG_REACHED_EOI; - - case M_DAC: - if (! get_dac(cinfo)) - return JPEG_SUSPENDED; - break; - - case M_DHT: - if (! get_dht(cinfo)) - return JPEG_SUSPENDED; - break; - - case M_DQT: - if (! get_dqt(cinfo)) - return JPEG_SUSPENDED; - break; - - case M_DRI: - if (! get_dri(cinfo)) - return JPEG_SUSPENDED; - break; - - case M_APP0: - case M_APP1: - case M_APP2: - case M_APP3: - case M_APP4: - case M_APP5: - case M_APP6: - case M_APP7: - case M_APP8: - case M_APP9: - case M_APP10: - case M_APP11: - case M_APP12: - case M_APP13: - case M_APP14: - case M_APP15: - if (! (*((my_marker_ptr) cinfo->marker)->process_APPn[ - cinfo->unread_marker - (int) M_APP0]) (cinfo)) - return JPEG_SUSPENDED; - break; - - case M_COM: - if (! (*((my_marker_ptr) cinfo->marker)->process_COM) (cinfo)) - return JPEG_SUSPENDED; - break; - - case M_RST0: /* these are all parameterless */ - case M_RST1: - case M_RST2: - case M_RST3: - case M_RST4: - case M_RST5: - case M_RST6: - case M_RST7: - case M_TEM: - TRACEMS1(cinfo, 1, JTRC_PARMLESS_MARKER, cinfo->unread_marker); - break; - - case M_DNL: /* Ignore DNL ... perhaps the wrong thing */ - if (! skip_variable(cinfo)) - return JPEG_SUSPENDED; - break; - - default: /* must be DHP, EXP, JPGn, or RESn */ - /* For now, we treat the reserved markers as fatal errors since they are - * likely to be used to signal incompatible JPEG Part 3 extensions. - * Once the JPEG 3 version-number marker is well defined, this code - * ought to change! - */ - ERREXIT1(cinfo, JERR_UNKNOWN_MARKER, cinfo->unread_marker); - break; - } - /* Successfully processed marker, so reset state variable */ - cinfo->unread_marker = 0; - } /* end loop */ -} - - -/* - * Read a restart marker, which is expected to appear next in the datastream; - * if the marker is not there, take appropriate recovery action. - * Returns FALSE if suspension is required. - * - * This is called by the entropy decoder after it has read an appropriate - * number of MCUs. cinfo->unread_marker may be nonzero if the entropy decoder - * has already read a marker from the data source. Under normal conditions - * cinfo->unread_marker will be reset to 0 before returning; if not reset, - * it holds a marker which the decoder will be unable to read past. - */ - -METHODDEF(boolean) -read_restart_marker (j_decompress_ptr cinfo) -{ - /* Obtain a marker unless we already did. */ - /* Note that next_marker will complain if it skips any data. */ - if (cinfo->unread_marker == 0) { - if (! next_marker(cinfo)) - return FALSE; - } - - if (cinfo->unread_marker == - ((int) M_RST0 + cinfo->marker->next_restart_num)) { - /* Normal case --- swallow the marker and let entropy decoder continue */ - TRACEMS1(cinfo, 3, JTRC_RST, cinfo->marker->next_restart_num); - cinfo->unread_marker = 0; - } else { - /* Uh-oh, the restart markers have been messed up. */ - /* Let the data source manager determine how to resync. */ - if (! (*cinfo->src->resync_to_restart) (cinfo, - cinfo->marker->next_restart_num)) - return FALSE; - } - - /* Update next-restart state */ - cinfo->marker->next_restart_num = (cinfo->marker->next_restart_num + 1) & 7; - - return TRUE; -} - - -/* - * This is the default resync_to_restart method for data source managers - * to use if they don't have any better approach. Some data source managers - * may be able to back up, or may have additional knowledge about the data - * which permits a more intelligent recovery strategy; such managers would - * presumably supply their own resync method. - * - * read_restart_marker calls resync_to_restart if it finds a marker other than - * the restart marker it was expecting. (This code is *not* used unless - * a nonzero restart interval has been declared.) cinfo->unread_marker is - * the marker code actually found (might be anything, except 0 or FF). - * The desired restart marker number (0..7) is passed as a parameter. - * This routine is supposed to apply whatever error recovery strategy seems - * appropriate in order to position the input stream to the next data segment. - * Note that cinfo->unread_marker is treated as a marker appearing before - * the current data-source input point; usually it should be reset to zero - * before returning. - * Returns FALSE if suspension is required. - * - * This implementation is substantially constrained by wanting to treat the - * input as a data stream; this means we can't back up. Therefore, we have - * only the following actions to work with: - * 1. Simply discard the marker and let the entropy decoder resume at next - * byte of file. - * 2. Read forward until we find another marker, discarding intervening - * data. (In theory we could look ahead within the current bufferload, - * without having to discard data if we don't find the desired marker. - * This idea is not implemented here, in part because it makes behavior - * dependent on buffer size and chance buffer-boundary positions.) - * 3. Leave the marker unread (by failing to zero cinfo->unread_marker). - * This will cause the entropy decoder to process an empty data segment, - * inserting dummy zeroes, and then we will reprocess the marker. - * - * #2 is appropriate if we think the desired marker lies ahead, while #3 is - * appropriate if the found marker is a future restart marker (indicating - * that we have missed the desired restart marker, probably because it got - * corrupted). - * We apply #2 or #3 if the found marker is a restart marker no more than - * two counts behind or ahead of the expected one. We also apply #2 if the - * found marker is not a legal JPEG marker code (it's certainly bogus data). - * If the found marker is a restart marker more than 2 counts away, we do #1 - * (too much risk that the marker is erroneous; with luck we will be able to - * resync at some future point). - * For any valid non-restart JPEG marker, we apply #3. This keeps us from - * overrunning the end of a scan. An implementation limited to single-scan - * files might find it better to apply #2 for markers other than EOI, since - * any other marker would have to be bogus data in that case. - */ - -GLOBAL(boolean) -jpeg_resync_to_restart (j_decompress_ptr cinfo, int desired) -{ - int marker = cinfo->unread_marker; - int action = 1; - - /* Always put up a warning. */ - WARNMS2(cinfo, JWRN_MUST_RESYNC, marker, desired); - - /* Outer loop handles repeated decision after scanning forward. */ - for (;;) { - if (marker < (int) M_SOF0) - action = 2; /* invalid marker */ - else if (marker < (int) M_RST0 || marker > (int) M_RST7) - action = 3; /* valid non-restart marker */ - else { - if (marker == ((int) M_RST0 + ((desired+1) & 7)) || - marker == ((int) M_RST0 + ((desired+2) & 7))) - action = 3; /* one of the next two expected restarts */ - else if (marker == ((int) M_RST0 + ((desired-1) & 7)) || - marker == ((int) M_RST0 + ((desired-2) & 7))) - action = 2; /* a prior restart, so advance */ - else - action = 1; /* desired restart or too far away */ - } - TRACEMS2(cinfo, 4, JTRC_RECOVERY_ACTION, marker, action); - switch (action) { - case 1: - /* Discard marker and let entropy decoder resume processing. */ - cinfo->unread_marker = 0; - return TRUE; - case 2: - /* Scan to the next marker, and repeat the decision loop. */ - if (! next_marker(cinfo)) - return FALSE; - marker = cinfo->unread_marker; - break; - case 3: - /* Return without advancing past this marker. */ - /* Entropy decoder will be forced to process an empty segment. */ - return TRUE; - } - } /* end loop */ -} - - -/* - * Reset marker processing state to begin a fresh datastream. - */ - -METHODDEF(void) -reset_marker_reader (j_decompress_ptr cinfo) -{ - my_marker_ptr marker = (my_marker_ptr) cinfo->marker; - - cinfo->comp_info = NULL; /* until allocated by get_sof */ - cinfo->input_scan_number = 0; /* no SOS seen yet */ - cinfo->unread_marker = 0; /* no pending marker */ - marker->pub.saw_SOI = FALSE; /* set internal state too */ - marker->pub.saw_SOF = FALSE; - marker->pub.discarded_bytes = 0; - marker->cur_marker = NULL; -} - - -/* - * Initialize the marker reader module. - * This is called only once, when the decompression object is created. - */ - -GLOBAL(void) -jinit_marker_reader (j_decompress_ptr cinfo) -{ - my_marker_ptr marker; - int i; - - /* Create subobject in permanent pool */ - marker = (my_marker_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT, - SIZEOF(my_marker_reader)); - cinfo->marker = (struct jpeg_marker_reader *) marker; - /* Initialize public method pointers */ - marker->pub.reset_marker_reader = reset_marker_reader; - marker->pub.read_markers = read_markers; - marker->pub.read_restart_marker = read_restart_marker; - /* Initialize COM/APPn processing. - * By default, we examine and then discard APP0 and APP14, - * but simply discard COM and all other APPn. - */ - marker->process_COM = skip_variable; - marker->length_limit_COM = 0; - for (i = 0; i < 16; i++) { - marker->process_APPn[i] = skip_variable; - marker->length_limit_APPn[i] = 0; - } - marker->process_APPn[0] = get_interesting_appn; - marker->process_APPn[14] = get_interesting_appn; - /* Reset marker processing state */ - reset_marker_reader(cinfo); -} - - -/* - * Control saving of COM and APPn markers into marker_list. - */ - -#ifdef SAVE_MARKERS_SUPPORTED - -GLOBAL(void) -jpeg_save_markers (j_decompress_ptr cinfo, int marker_code, - unsigned int length_limit) -{ - my_marker_ptr marker = (my_marker_ptr) cinfo->marker; - long maxlength; - jpeg_marker_parser_method processor; - - /* Length limit mustn't be larger than what we can allocate - * (should only be a concern in a 16-bit environment). - */ - maxlength = cinfo->mem->max_alloc_chunk - SIZEOF(struct jpeg_marker_struct); - if (((long) length_limit) > maxlength) - length_limit = (unsigned int) maxlength; - - /* Choose processor routine to use. - * APP0/APP14 have special requirements. - */ - if (length_limit) { - processor = save_marker; - /* If saving APP0/APP14, save at least enough for our internal use. */ - if (marker_code == (int) M_APP0 && length_limit < APP0_DATA_LEN) - length_limit = APP0_DATA_LEN; - else if (marker_code == (int) M_APP14 && length_limit < APP14_DATA_LEN) - length_limit = APP14_DATA_LEN; - } else { - processor = skip_variable; - /* If discarding APP0/APP14, use our regular on-the-fly processor. */ - if (marker_code == (int) M_APP0 || marker_code == (int) M_APP14) - processor = get_interesting_appn; - } - - if (marker_code == (int) M_COM) { - marker->process_COM = processor; - marker->length_limit_COM = length_limit; - } else if (marker_code >= (int) M_APP0 && marker_code <= (int) M_APP15) { - marker->process_APPn[marker_code - (int) M_APP0] = processor; - marker->length_limit_APPn[marker_code - (int) M_APP0] = length_limit; - } else - ERREXIT1(cinfo, JERR_UNKNOWN_MARKER, marker_code); -} - -#endif /* SAVE_MARKERS_SUPPORTED */ - - -/* - * Install a special processing method for COM or APPn markers. - */ - -GLOBAL(void) -jpeg_set_marker_processor (j_decompress_ptr cinfo, int marker_code, - jpeg_marker_parser_method routine) -{ - my_marker_ptr marker = (my_marker_ptr) cinfo->marker; - - if (marker_code == (int) M_COM) - marker->process_COM = routine; - else if (marker_code >= (int) M_APP0 && marker_code <= (int) M_APP15) - marker->process_APPn[marker_code - (int) M_APP0] = routine; - else - ERREXIT1(cinfo, JERR_UNKNOWN_MARKER, marker_code); -} diff --git a/jpeg/jdmaster.c b/jpeg/jdmaster.c deleted file mode 100755 index fef72a2..0000000 --- a/jpeg/jdmaster.c +++ /dev/null @@ -1,531 +0,0 @@ -/* - * jdmaster.c - * - * Copyright (C) 1991-1997, Thomas G. Lane. - * Modified 2002-2011 by Guido Vollbeding. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains master control logic for the JPEG decompressor. - * These routines are concerned with selecting the modules to be executed - * and with determining the number of passes and the work to be done in each - * pass. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* Private state */ - -typedef struct { - struct jpeg_decomp_master pub; /* public fields */ - - int pass_number; /* # of passes completed */ - - boolean using_merged_upsample; /* TRUE if using merged upsample/cconvert */ - - /* Saved references to initialized quantizer modules, - * in case we need to switch modes. - */ - struct jpeg_color_quantizer * quantizer_1pass; - struct jpeg_color_quantizer * quantizer_2pass; -} my_decomp_master; - -typedef my_decomp_master * my_master_ptr; - - -/* - * Determine whether merged upsample/color conversion should be used. - * CRUCIAL: this must match the actual capabilities of jdmerge.c! - */ - -LOCAL(boolean) -use_merged_upsample (j_decompress_ptr cinfo) -{ -#ifdef UPSAMPLE_MERGING_SUPPORTED - /* Merging is the equivalent of plain box-filter upsampling */ - if (cinfo->do_fancy_upsampling || cinfo->CCIR601_sampling) - return FALSE; - /* jdmerge.c only supports YCC=>RGB color conversion */ - if (cinfo->jpeg_color_space != JCS_YCbCr || cinfo->num_components != 3 || - cinfo->out_color_space != JCS_RGB || - cinfo->out_color_components != RGB_PIXELSIZE) - return FALSE; - /* and it only handles 2h1v or 2h2v sampling ratios */ - if (cinfo->comp_info[0].h_samp_factor != 2 || - cinfo->comp_info[1].h_samp_factor != 1 || - cinfo->comp_info[2].h_samp_factor != 1 || - cinfo->comp_info[0].v_samp_factor > 2 || - cinfo->comp_info[1].v_samp_factor != 1 || - cinfo->comp_info[2].v_samp_factor != 1) - return FALSE; - /* furthermore, it doesn't work if we've scaled the IDCTs differently */ - if (cinfo->comp_info[0].DCT_h_scaled_size != cinfo->min_DCT_h_scaled_size || - cinfo->comp_info[1].DCT_h_scaled_size != cinfo->min_DCT_h_scaled_size || - cinfo->comp_info[2].DCT_h_scaled_size != cinfo->min_DCT_h_scaled_size || - cinfo->comp_info[0].DCT_v_scaled_size != cinfo->min_DCT_v_scaled_size || - cinfo->comp_info[1].DCT_v_scaled_size != cinfo->min_DCT_v_scaled_size || - cinfo->comp_info[2].DCT_v_scaled_size != cinfo->min_DCT_v_scaled_size) - return FALSE; - /* ??? also need to test for upsample-time rescaling, when & if supported */ - return TRUE; /* by golly, it'll work... */ -#else - return FALSE; -#endif -} - - -/* - * Compute output image dimensions and related values. - * NOTE: this is exported for possible use by application. - * Hence it mustn't do anything that can't be done twice. - * Also note that it may be called before the master module is initialized! - */ - -GLOBAL(void) -jpeg_calc_output_dimensions (j_decompress_ptr cinfo) -/* Do computations that are needed before master selection phase. - * This function is used for full decompression. - */ -{ -#ifdef IDCT_SCALING_SUPPORTED - int ci; - jpeg_component_info *compptr; -#endif - - /* Prevent application from calling me at wrong times */ - if (cinfo->global_state != DSTATE_READY) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - - /* Compute core output image dimensions and DCT scaling choices. */ - jpeg_core_output_dimensions(cinfo); - -#ifdef IDCT_SCALING_SUPPORTED - - /* In selecting the actual DCT scaling for each component, we try to - * scale up the chroma components via IDCT scaling rather than upsampling. - * This saves time if the upsampler gets to use 1:1 scaling. - * Note this code adapts subsampling ratios which are powers of 2. - */ - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - int ssize = 1; - while (cinfo->min_DCT_h_scaled_size * ssize <= - (cinfo->do_fancy_upsampling ? DCTSIZE : DCTSIZE / 2) && - (cinfo->max_h_samp_factor % (compptr->h_samp_factor * ssize * 2)) == 0) { - ssize = ssize * 2; - } - compptr->DCT_h_scaled_size = cinfo->min_DCT_h_scaled_size * ssize; - ssize = 1; - while (cinfo->min_DCT_v_scaled_size * ssize <= - (cinfo->do_fancy_upsampling ? DCTSIZE : DCTSIZE / 2) && - (cinfo->max_v_samp_factor % (compptr->v_samp_factor * ssize * 2)) == 0) { - ssize = ssize * 2; - } - compptr->DCT_v_scaled_size = cinfo->min_DCT_v_scaled_size * ssize; - - /* We don't support IDCT ratios larger than 2. */ - if (compptr->DCT_h_scaled_size > compptr->DCT_v_scaled_size * 2) - compptr->DCT_h_scaled_size = compptr->DCT_v_scaled_size * 2; - else if (compptr->DCT_v_scaled_size > compptr->DCT_h_scaled_size * 2) - compptr->DCT_v_scaled_size = compptr->DCT_h_scaled_size * 2; - } - - /* Recompute downsampled dimensions of components; - * application needs to know these if using raw downsampled data. - */ - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - /* Size in samples, after IDCT scaling */ - compptr->downsampled_width = (JDIMENSION) - jdiv_round_up((long) cinfo->image_width * - (long) (compptr->h_samp_factor * compptr->DCT_h_scaled_size), - (long) (cinfo->max_h_samp_factor * cinfo->block_size)); - compptr->downsampled_height = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height * - (long) (compptr->v_samp_factor * compptr->DCT_v_scaled_size), - (long) (cinfo->max_v_samp_factor * cinfo->block_size)); - } - -#endif /* IDCT_SCALING_SUPPORTED */ - - /* Report number of components in selected colorspace. */ - /* Probably this should be in the color conversion module... */ - switch (cinfo->out_color_space) { - case JCS_GRAYSCALE: - cinfo->out_color_components = 1; - break; - case JCS_RGB: - cinfo->out_color_components = RGB_PIXELSIZE; - break; - case JCS_YCbCr: - cinfo->out_color_components = 3; - break; - case JCS_CMYK: - case JCS_YCCK: - cinfo->out_color_components = 4; - break; - default: /* else must be same colorspace as in file */ - cinfo->out_color_components = cinfo->num_components; - break; - } - cinfo->output_components = (cinfo->quantize_colors ? 1 : - cinfo->out_color_components); - - /* See if upsampler will want to emit more than one row at a time */ - if (use_merged_upsample(cinfo)) - cinfo->rec_outbuf_height = cinfo->max_v_samp_factor; - else - cinfo->rec_outbuf_height = 1; -} - - -/* - * Several decompression processes need to range-limit values to the range - * 0..MAXJSAMPLE; the input value may fall somewhat outside this range - * due to noise introduced by quantization, roundoff error, etc. These - * processes are inner loops and need to be as fast as possible. On most - * machines, particularly CPUs with pipelines or instruction prefetch, - * a (subscript-check-less) C table lookup - * x = sample_range_limit[x]; - * is faster than explicit tests - * if (x < 0) x = 0; - * else if (x > MAXJSAMPLE) x = MAXJSAMPLE; - * These processes all use a common table prepared by the routine below. - * - * For most steps we can mathematically guarantee that the initial value - * of x is within MAXJSAMPLE+1 of the legal range, so a table running from - * -(MAXJSAMPLE+1) to 2*MAXJSAMPLE+1 is sufficient. But for the initial - * limiting step (just after the IDCT), a wildly out-of-range value is - * possible if the input data is corrupt. To avoid any chance of indexing - * off the end of memory and getting a bad-pointer trap, we perform the - * post-IDCT limiting thus: - * x = range_limit[x & MASK]; - * where MASK is 2 bits wider than legal sample data, ie 10 bits for 8-bit - * samples. Under normal circumstances this is more than enough range and - * a correct output will be generated; with bogus input data the mask will - * cause wraparound, and we will safely generate a bogus-but-in-range output. - * For the post-IDCT step, we want to convert the data from signed to unsigned - * representation by adding CENTERJSAMPLE at the same time that we limit it. - * So the post-IDCT limiting table ends up looking like this: - * CENTERJSAMPLE,CENTERJSAMPLE+1,...,MAXJSAMPLE, - * MAXJSAMPLE (repeat 2*(MAXJSAMPLE+1)-CENTERJSAMPLE times), - * 0 (repeat 2*(MAXJSAMPLE+1)-CENTERJSAMPLE times), - * 0,1,...,CENTERJSAMPLE-1 - * Negative inputs select values from the upper half of the table after - * masking. - * - * We can save some space by overlapping the start of the post-IDCT table - * with the simpler range limiting table. The post-IDCT table begins at - * sample_range_limit + CENTERJSAMPLE. - * - * Note that the table is allocated in near data space on PCs; it's small - * enough and used often enough to justify this. - */ - -LOCAL(void) -prepare_range_limit_table (j_decompress_ptr cinfo) -/* Allocate and fill in the sample_range_limit table */ -{ - JSAMPLE * table; - int i; - - table = (JSAMPLE *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - (5 * (MAXJSAMPLE+1) + CENTERJSAMPLE) * SIZEOF(JSAMPLE)); - table += (MAXJSAMPLE+1); /* allow negative subscripts of simple table */ - cinfo->sample_range_limit = table; - /* First segment of "simple" table: limit[x] = 0 for x < 0 */ - MEMZERO(table - (MAXJSAMPLE+1), (MAXJSAMPLE+1) * SIZEOF(JSAMPLE)); - /* Main part of "simple" table: limit[x] = x */ - for (i = 0; i <= MAXJSAMPLE; i++) - table[i] = (JSAMPLE) i; - table += CENTERJSAMPLE; /* Point to where post-IDCT table starts */ - /* End of simple table, rest of first half of post-IDCT table */ - for (i = CENTERJSAMPLE; i < 2*(MAXJSAMPLE+1); i++) - table[i] = MAXJSAMPLE; - /* Second half of post-IDCT table */ - MEMZERO(table + (2 * (MAXJSAMPLE+1)), - (2 * (MAXJSAMPLE+1) - CENTERJSAMPLE) * SIZEOF(JSAMPLE)); - MEMCOPY(table + (4 * (MAXJSAMPLE+1) - CENTERJSAMPLE), - cinfo->sample_range_limit, CENTERJSAMPLE * SIZEOF(JSAMPLE)); -} - - -/* - * Master selection of decompression modules. - * This is done once at jpeg_start_decompress time. We determine - * which modules will be used and give them appropriate initialization calls. - * We also initialize the decompressor input side to begin consuming data. - * - * Since jpeg_read_header has finished, we know what is in the SOF - * and (first) SOS markers. We also have all the application parameter - * settings. - */ - -LOCAL(void) -master_selection (j_decompress_ptr cinfo) -{ - my_master_ptr master = (my_master_ptr) cinfo->master; - boolean use_c_buffer; - long samplesperrow; - JDIMENSION jd_samplesperrow; - - /* Initialize dimensions and other stuff */ - jpeg_calc_output_dimensions(cinfo); - prepare_range_limit_table(cinfo); - - /* Width of an output scanline must be representable as JDIMENSION. */ - samplesperrow = (long) cinfo->output_width * (long) cinfo->out_color_components; - jd_samplesperrow = (JDIMENSION) samplesperrow; - if ((long) jd_samplesperrow != samplesperrow) - ERREXIT(cinfo, JERR_WIDTH_OVERFLOW); - - /* Initialize my private state */ - master->pass_number = 0; - master->using_merged_upsample = use_merged_upsample(cinfo); - - /* Color quantizer selection */ - master->quantizer_1pass = NULL; - master->quantizer_2pass = NULL; - /* No mode changes if not using buffered-image mode. */ - if (! cinfo->quantize_colors || ! cinfo->buffered_image) { - cinfo->enable_1pass_quant = FALSE; - cinfo->enable_external_quant = FALSE; - cinfo->enable_2pass_quant = FALSE; - } - if (cinfo->quantize_colors) { - if (cinfo->raw_data_out) - ERREXIT(cinfo, JERR_NOTIMPL); - /* 2-pass quantizer only works in 3-component color space. */ - if (cinfo->out_color_components != 3) { - cinfo->enable_1pass_quant = TRUE; - cinfo->enable_external_quant = FALSE; - cinfo->enable_2pass_quant = FALSE; - cinfo->colormap = NULL; - } else if (cinfo->colormap != NULL) { - cinfo->enable_external_quant = TRUE; - } else if (cinfo->two_pass_quantize) { - cinfo->enable_2pass_quant = TRUE; - } else { - cinfo->enable_1pass_quant = TRUE; - } - - if (cinfo->enable_1pass_quant) { -#ifdef QUANT_1PASS_SUPPORTED - jinit_1pass_quantizer(cinfo); - master->quantizer_1pass = cinfo->cquantize; -#else - ERREXIT(cinfo, JERR_NOT_COMPILED); -#endif - } - - /* We use the 2-pass code to map to external colormaps. */ - if (cinfo->enable_2pass_quant || cinfo->enable_external_quant) { -#ifdef QUANT_2PASS_SUPPORTED - jinit_2pass_quantizer(cinfo); - master->quantizer_2pass = cinfo->cquantize; -#else - ERREXIT(cinfo, JERR_NOT_COMPILED); -#endif - } - /* If both quantizers are initialized, the 2-pass one is left active; - * this is necessary for starting with quantization to an external map. - */ - } - - /* Post-processing: in particular, color conversion first */ - if (! cinfo->raw_data_out) { - if (master->using_merged_upsample) { -#ifdef UPSAMPLE_MERGING_SUPPORTED - jinit_merged_upsampler(cinfo); /* does color conversion too */ -#else - ERREXIT(cinfo, JERR_NOT_COMPILED); -#endif - } else { - jinit_color_deconverter(cinfo); - jinit_upsampler(cinfo); - } - jinit_d_post_controller(cinfo, cinfo->enable_2pass_quant); - } - /* Inverse DCT */ - jinit_inverse_dct(cinfo); - /* Entropy decoding: either Huffman or arithmetic coding. */ - if (cinfo->arith_code) - jinit_arith_decoder(cinfo); - else { - jinit_huff_decoder(cinfo); - } - - /* Initialize principal buffer controllers. */ - use_c_buffer = cinfo->inputctl->has_multiple_scans || cinfo->buffered_image; - jinit_d_coef_controller(cinfo, use_c_buffer); - - if (! cinfo->raw_data_out) - jinit_d_main_controller(cinfo, FALSE /* never need full buffer here */); - - /* We can now tell the memory manager to allocate virtual arrays. */ - (*cinfo->mem->realize_virt_arrays) ((j_common_ptr) cinfo); - - /* Initialize input side of decompressor to consume first scan. */ - (*cinfo->inputctl->start_input_pass) (cinfo); - -#ifdef D_MULTISCAN_FILES_SUPPORTED - /* If jpeg_start_decompress will read the whole file, initialize - * progress monitoring appropriately. The input step is counted - * as one pass. - */ - if (cinfo->progress != NULL && ! cinfo->buffered_image && - cinfo->inputctl->has_multiple_scans) { - int nscans; - /* Estimate number of scans to set pass_limit. */ - if (cinfo->progressive_mode) { - /* Arbitrarily estimate 2 interleaved DC scans + 3 AC scans/component. */ - nscans = 2 + 3 * cinfo->num_components; - } else { - /* For a nonprogressive multiscan file, estimate 1 scan per component. */ - nscans = cinfo->num_components; - } - cinfo->progress->pass_counter = 0L; - cinfo->progress->pass_limit = (long) cinfo->total_iMCU_rows * nscans; - cinfo->progress->completed_passes = 0; - cinfo->progress->total_passes = (cinfo->enable_2pass_quant ? 3 : 2); - /* Count the input pass as done */ - master->pass_number++; - } -#endif /* D_MULTISCAN_FILES_SUPPORTED */ -} - - -/* - * Per-pass setup. - * This is called at the beginning of each output pass. We determine which - * modules will be active during this pass and give them appropriate - * start_pass calls. We also set is_dummy_pass to indicate whether this - * is a "real" output pass or a dummy pass for color quantization. - * (In the latter case, jdapistd.c will crank the pass to completion.) - */ - -METHODDEF(void) -prepare_for_output_pass (j_decompress_ptr cinfo) -{ - my_master_ptr master = (my_master_ptr) cinfo->master; - - if (master->pub.is_dummy_pass) { -#ifdef QUANT_2PASS_SUPPORTED - /* Final pass of 2-pass quantization */ - master->pub.is_dummy_pass = FALSE; - (*cinfo->cquantize->start_pass) (cinfo, FALSE); - (*cinfo->post->start_pass) (cinfo, JBUF_CRANK_DEST); - (*cinfo->main->start_pass) (cinfo, JBUF_CRANK_DEST); -#else - ERREXIT(cinfo, JERR_NOT_COMPILED); -#endif /* QUANT_2PASS_SUPPORTED */ - } else { - if (cinfo->quantize_colors && cinfo->colormap == NULL) { - /* Select new quantization method */ - if (cinfo->two_pass_quantize && cinfo->enable_2pass_quant) { - cinfo->cquantize = master->quantizer_2pass; - master->pub.is_dummy_pass = TRUE; - } else if (cinfo->enable_1pass_quant) { - cinfo->cquantize = master->quantizer_1pass; - } else { - ERREXIT(cinfo, JERR_MODE_CHANGE); - } - } - (*cinfo->idct->start_pass) (cinfo); - (*cinfo->coef->start_output_pass) (cinfo); - if (! cinfo->raw_data_out) { - if (! master->using_merged_upsample) - (*cinfo->cconvert->start_pass) (cinfo); - (*cinfo->upsample->start_pass) (cinfo); - if (cinfo->quantize_colors) - (*cinfo->cquantize->start_pass) (cinfo, master->pub.is_dummy_pass); - (*cinfo->post->start_pass) (cinfo, - (master->pub.is_dummy_pass ? JBUF_SAVE_AND_PASS : JBUF_PASS_THRU)); - (*cinfo->main->start_pass) (cinfo, JBUF_PASS_THRU); - } - } - - /* Set up progress monitor's pass info if present */ - if (cinfo->progress != NULL) { - cinfo->progress->completed_passes = master->pass_number; - cinfo->progress->total_passes = master->pass_number + - (master->pub.is_dummy_pass ? 2 : 1); - /* In buffered-image mode, we assume one more output pass if EOI not - * yet reached, but no more passes if EOI has been reached. - */ - if (cinfo->buffered_image && ! cinfo->inputctl->eoi_reached) { - cinfo->progress->total_passes += (cinfo->enable_2pass_quant ? 2 : 1); - } - } -} - - -/* - * Finish up at end of an output pass. - */ - -METHODDEF(void) -finish_output_pass (j_decompress_ptr cinfo) -{ - my_master_ptr master = (my_master_ptr) cinfo->master; - - if (cinfo->quantize_colors) - (*cinfo->cquantize->finish_pass) (cinfo); - master->pass_number++; -} - - -#ifdef D_MULTISCAN_FILES_SUPPORTED - -/* - * Switch to a new external colormap between output passes. - */ - -GLOBAL(void) -jpeg_new_colormap (j_decompress_ptr cinfo) -{ - my_master_ptr master = (my_master_ptr) cinfo->master; - - /* Prevent application from calling me at wrong times */ - if (cinfo->global_state != DSTATE_BUFIMAGE) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - - if (cinfo->quantize_colors && cinfo->enable_external_quant && - cinfo->colormap != NULL) { - /* Select 2-pass quantizer for external colormap use */ - cinfo->cquantize = master->quantizer_2pass; - /* Notify quantizer of colormap change */ - (*cinfo->cquantize->new_color_map) (cinfo); - master->pub.is_dummy_pass = FALSE; /* just in case */ - } else - ERREXIT(cinfo, JERR_MODE_CHANGE); -} - -#endif /* D_MULTISCAN_FILES_SUPPORTED */ - - -/* - * Initialize master decompression control and select active modules. - * This is performed at the start of jpeg_start_decompress. - */ - -GLOBAL(void) -jinit_master_decompress (j_decompress_ptr cinfo) -{ - my_master_ptr master; - - master = (my_master_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(my_decomp_master)); - cinfo->master = (struct jpeg_decomp_master *) master; - master->pub.prepare_for_output_pass = prepare_for_output_pass; - master->pub.finish_output_pass = finish_output_pass; - - master->pub.is_dummy_pass = FALSE; - - master_selection(cinfo); -} diff --git a/jpeg/jdmerge.c b/jpeg/jdmerge.c deleted file mode 100755 index 3744446..0000000 --- a/jpeg/jdmerge.c +++ /dev/null @@ -1,400 +0,0 @@ -/* - * jdmerge.c - * - * Copyright (C) 1994-1996, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains code for merged upsampling/color conversion. - * - * This file combines functions from jdsample.c and jdcolor.c; - * read those files first to understand what's going on. - * - * When the chroma components are to be upsampled by simple replication - * (ie, box filtering), we can save some work in color conversion by - * calculating all the output pixels corresponding to a pair of chroma - * samples at one time. In the conversion equations - * R = Y + K1 * Cr - * G = Y + K2 * Cb + K3 * Cr - * B = Y + K4 * Cb - * only the Y term varies among the group of pixels corresponding to a pair - * of chroma samples, so the rest of the terms can be calculated just once. - * At typical sampling ratios, this eliminates half or three-quarters of the - * multiplications needed for color conversion. - * - * This file currently provides implementations for the following cases: - * YCbCr => RGB color conversion only. - * Sampling ratios of 2h1v or 2h2v. - * No scaling needed at upsample time. - * Corner-aligned (non-CCIR601) sampling alignment. - * Other special cases could be added, but in most applications these are - * the only common cases. (For uncommon cases we fall back on the more - * general code in jdsample.c and jdcolor.c.) - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - -#ifdef UPSAMPLE_MERGING_SUPPORTED - - -/* Private subobject */ - -typedef struct { - struct jpeg_upsampler pub; /* public fields */ - - /* Pointer to routine to do actual upsampling/conversion of one row group */ - JMETHOD(void, upmethod, (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION in_row_group_ctr, - JSAMPARRAY output_buf)); - - /* Private state for YCC->RGB conversion */ - int * Cr_r_tab; /* => table for Cr to R conversion */ - int * Cb_b_tab; /* => table for Cb to B conversion */ - INT32 * Cr_g_tab; /* => table for Cr to G conversion */ - INT32 * Cb_g_tab; /* => table for Cb to G conversion */ - - /* For 2:1 vertical sampling, we produce two output rows at a time. - * We need a "spare" row buffer to hold the second output row if the - * application provides just a one-row buffer; we also use the spare - * to discard the dummy last row if the image height is odd. - */ - JSAMPROW spare_row; - boolean spare_full; /* T if spare buffer is occupied */ - - JDIMENSION out_row_width; /* samples per output row */ - JDIMENSION rows_to_go; /* counts rows remaining in image */ -} my_upsampler; - -typedef my_upsampler * my_upsample_ptr; - -#define SCALEBITS 16 /* speediest right-shift on some machines */ -#define ONE_HALF ((INT32) 1 << (SCALEBITS-1)) -#define FIX(x) ((INT32) ((x) * (1L<RGB colorspace conversion. - * This is taken directly from jdcolor.c; see that file for more info. - */ - -LOCAL(void) -build_ycc_rgb_table (j_decompress_ptr cinfo) -{ - my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; - int i; - INT32 x; - SHIFT_TEMPS - - upsample->Cr_r_tab = (int *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - (MAXJSAMPLE+1) * SIZEOF(int)); - upsample->Cb_b_tab = (int *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - (MAXJSAMPLE+1) * SIZEOF(int)); - upsample->Cr_g_tab = (INT32 *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - (MAXJSAMPLE+1) * SIZEOF(INT32)); - upsample->Cb_g_tab = (INT32 *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - (MAXJSAMPLE+1) * SIZEOF(INT32)); - - for (i = 0, x = -CENTERJSAMPLE; i <= MAXJSAMPLE; i++, x++) { - /* i is the actual input pixel value, in the range 0..MAXJSAMPLE */ - /* The Cb or Cr value we are thinking of is x = i - CENTERJSAMPLE */ - /* Cr=>R value is nearest int to 1.40200 * x */ - upsample->Cr_r_tab[i] = (int) - RIGHT_SHIFT(FIX(1.40200) * x + ONE_HALF, SCALEBITS); - /* Cb=>B value is nearest int to 1.77200 * x */ - upsample->Cb_b_tab[i] = (int) - RIGHT_SHIFT(FIX(1.77200) * x + ONE_HALF, SCALEBITS); - /* Cr=>G value is scaled-up -0.71414 * x */ - upsample->Cr_g_tab[i] = (- FIX(0.71414)) * x; - /* Cb=>G value is scaled-up -0.34414 * x */ - /* We also add in ONE_HALF so that need not do it in inner loop */ - upsample->Cb_g_tab[i] = (- FIX(0.34414)) * x + ONE_HALF; - } -} - - -/* - * Initialize for an upsampling pass. - */ - -METHODDEF(void) -start_pass_merged_upsample (j_decompress_ptr cinfo) -{ - my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; - - /* Mark the spare buffer empty */ - upsample->spare_full = FALSE; - /* Initialize total-height counter for detecting bottom of image */ - upsample->rows_to_go = cinfo->output_height; -} - - -/* - * Control routine to do upsampling (and color conversion). - * - * The control routine just handles the row buffering considerations. - */ - -METHODDEF(void) -merged_2v_upsample (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, - JDIMENSION in_row_groups_avail, - JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, - JDIMENSION out_rows_avail) -/* 2:1 vertical sampling case: may need a spare row. */ -{ - my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; - JSAMPROW work_ptrs[2]; - JDIMENSION num_rows; /* number of rows returned to caller */ - - if (upsample->spare_full) { - /* If we have a spare row saved from a previous cycle, just return it. */ - jcopy_sample_rows(& upsample->spare_row, 0, output_buf + *out_row_ctr, 0, - 1, upsample->out_row_width); - num_rows = 1; - upsample->spare_full = FALSE; - } else { - /* Figure number of rows to return to caller. */ - num_rows = 2; - /* Not more than the distance to the end of the image. */ - if (num_rows > upsample->rows_to_go) - num_rows = upsample->rows_to_go; - /* And not more than what the client can accept: */ - out_rows_avail -= *out_row_ctr; - if (num_rows > out_rows_avail) - num_rows = out_rows_avail; - /* Create output pointer array for upsampler. */ - work_ptrs[0] = output_buf[*out_row_ctr]; - if (num_rows > 1) { - work_ptrs[1] = output_buf[*out_row_ctr + 1]; - } else { - work_ptrs[1] = upsample->spare_row; - upsample->spare_full = TRUE; - } - /* Now do the upsampling. */ - (*upsample->upmethod) (cinfo, input_buf, *in_row_group_ctr, work_ptrs); - } - - /* Adjust counts */ - *out_row_ctr += num_rows; - upsample->rows_to_go -= num_rows; - /* When the buffer is emptied, declare this input row group consumed */ - if (! upsample->spare_full) - (*in_row_group_ctr)++; -} - - -METHODDEF(void) -merged_1v_upsample (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, - JDIMENSION in_row_groups_avail, - JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, - JDIMENSION out_rows_avail) -/* 1:1 vertical sampling case: much easier, never need a spare row. */ -{ - my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; - - /* Just do the upsampling. */ - (*upsample->upmethod) (cinfo, input_buf, *in_row_group_ctr, - output_buf + *out_row_ctr); - /* Adjust counts */ - (*out_row_ctr)++; - (*in_row_group_ctr)++; -} - - -/* - * These are the routines invoked by the control routines to do - * the actual upsampling/conversion. One row group is processed per call. - * - * Note: since we may be writing directly into application-supplied buffers, - * we have to be honest about the output width; we can't assume the buffer - * has been rounded up to an even width. - */ - - -/* - * Upsample and color convert for the case of 2:1 horizontal and 1:1 vertical. - */ - -METHODDEF(void) -h2v1_merged_upsample (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION in_row_group_ctr, - JSAMPARRAY output_buf) -{ - my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; - register int y, cred, cgreen, cblue; - int cb, cr; - register JSAMPROW outptr; - JSAMPROW inptr0, inptr1, inptr2; - JDIMENSION col; - /* copy these pointers into registers if possible */ - register JSAMPLE * range_limit = cinfo->sample_range_limit; - int * Crrtab = upsample->Cr_r_tab; - int * Cbbtab = upsample->Cb_b_tab; - INT32 * Crgtab = upsample->Cr_g_tab; - INT32 * Cbgtab = upsample->Cb_g_tab; - SHIFT_TEMPS - - inptr0 = input_buf[0][in_row_group_ctr]; - inptr1 = input_buf[1][in_row_group_ctr]; - inptr2 = input_buf[2][in_row_group_ctr]; - outptr = output_buf[0]; - /* Loop for each pair of output pixels */ - for (col = cinfo->output_width >> 1; col > 0; col--) { - /* Do the chroma part of the calculation */ - cb = GETJSAMPLE(*inptr1++); - cr = GETJSAMPLE(*inptr2++); - cred = Crrtab[cr]; - cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS); - cblue = Cbbtab[cb]; - /* Fetch 2 Y values and emit 2 pixels */ - y = GETJSAMPLE(*inptr0++); - outptr[RGB_RED] = range_limit[y + cred]; - outptr[RGB_GREEN] = range_limit[y + cgreen]; - outptr[RGB_BLUE] = range_limit[y + cblue]; - outptr += RGB_PIXELSIZE; - y = GETJSAMPLE(*inptr0++); - outptr[RGB_RED] = range_limit[y + cred]; - outptr[RGB_GREEN] = range_limit[y + cgreen]; - outptr[RGB_BLUE] = range_limit[y + cblue]; - outptr += RGB_PIXELSIZE; - } - /* If image width is odd, do the last output column separately */ - if (cinfo->output_width & 1) { - cb = GETJSAMPLE(*inptr1); - cr = GETJSAMPLE(*inptr2); - cred = Crrtab[cr]; - cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS); - cblue = Cbbtab[cb]; - y = GETJSAMPLE(*inptr0); - outptr[RGB_RED] = range_limit[y + cred]; - outptr[RGB_GREEN] = range_limit[y + cgreen]; - outptr[RGB_BLUE] = range_limit[y + cblue]; - } -} - - -/* - * Upsample and color convert for the case of 2:1 horizontal and 2:1 vertical. - */ - -METHODDEF(void) -h2v2_merged_upsample (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION in_row_group_ctr, - JSAMPARRAY output_buf) -{ - my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; - register int y, cred, cgreen, cblue; - int cb, cr; - register JSAMPROW outptr0, outptr1; - JSAMPROW inptr00, inptr01, inptr1, inptr2; - JDIMENSION col; - /* copy these pointers into registers if possible */ - register JSAMPLE * range_limit = cinfo->sample_range_limit; - int * Crrtab = upsample->Cr_r_tab; - int * Cbbtab = upsample->Cb_b_tab; - INT32 * Crgtab = upsample->Cr_g_tab; - INT32 * Cbgtab = upsample->Cb_g_tab; - SHIFT_TEMPS - - inptr00 = input_buf[0][in_row_group_ctr*2]; - inptr01 = input_buf[0][in_row_group_ctr*2 + 1]; - inptr1 = input_buf[1][in_row_group_ctr]; - inptr2 = input_buf[2][in_row_group_ctr]; - outptr0 = output_buf[0]; - outptr1 = output_buf[1]; - /* Loop for each group of output pixels */ - for (col = cinfo->output_width >> 1; col > 0; col--) { - /* Do the chroma part of the calculation */ - cb = GETJSAMPLE(*inptr1++); - cr = GETJSAMPLE(*inptr2++); - cred = Crrtab[cr]; - cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS); - cblue = Cbbtab[cb]; - /* Fetch 4 Y values and emit 4 pixels */ - y = GETJSAMPLE(*inptr00++); - outptr0[RGB_RED] = range_limit[y + cred]; - outptr0[RGB_GREEN] = range_limit[y + cgreen]; - outptr0[RGB_BLUE] = range_limit[y + cblue]; - outptr0 += RGB_PIXELSIZE; - y = GETJSAMPLE(*inptr00++); - outptr0[RGB_RED] = range_limit[y + cred]; - outptr0[RGB_GREEN] = range_limit[y + cgreen]; - outptr0[RGB_BLUE] = range_limit[y + cblue]; - outptr0 += RGB_PIXELSIZE; - y = GETJSAMPLE(*inptr01++); - outptr1[RGB_RED] = range_limit[y + cred]; - outptr1[RGB_GREEN] = range_limit[y + cgreen]; - outptr1[RGB_BLUE] = range_limit[y + cblue]; - outptr1 += RGB_PIXELSIZE; - y = GETJSAMPLE(*inptr01++); - outptr1[RGB_RED] = range_limit[y + cred]; - outptr1[RGB_GREEN] = range_limit[y + cgreen]; - outptr1[RGB_BLUE] = range_limit[y + cblue]; - outptr1 += RGB_PIXELSIZE; - } - /* If image width is odd, do the last output column separately */ - if (cinfo->output_width & 1) { - cb = GETJSAMPLE(*inptr1); - cr = GETJSAMPLE(*inptr2); - cred = Crrtab[cr]; - cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS); - cblue = Cbbtab[cb]; - y = GETJSAMPLE(*inptr00); - outptr0[RGB_RED] = range_limit[y + cred]; - outptr0[RGB_GREEN] = range_limit[y + cgreen]; - outptr0[RGB_BLUE] = range_limit[y + cblue]; - y = GETJSAMPLE(*inptr01); - outptr1[RGB_RED] = range_limit[y + cred]; - outptr1[RGB_GREEN] = range_limit[y + cgreen]; - outptr1[RGB_BLUE] = range_limit[y + cblue]; - } -} - - -/* - * Module initialization routine for merged upsampling/color conversion. - * - * NB: this is called under the conditions determined by use_merged_upsample() - * in jdmaster.c. That routine MUST correspond to the actual capabilities - * of this module; no safety checks are made here. - */ - -GLOBAL(void) -jinit_merged_upsampler (j_decompress_ptr cinfo) -{ - my_upsample_ptr upsample; - - upsample = (my_upsample_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(my_upsampler)); - cinfo->upsample = (struct jpeg_upsampler *) upsample; - upsample->pub.start_pass = start_pass_merged_upsample; - upsample->pub.need_context_rows = FALSE; - - upsample->out_row_width = cinfo->output_width * cinfo->out_color_components; - - if (cinfo->max_v_samp_factor == 2) { - upsample->pub.upsample = merged_2v_upsample; - upsample->upmethod = h2v2_merged_upsample; - /* Allocate a spare row buffer */ - upsample->spare_row = (JSAMPROW) - (*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE, - (size_t) (upsample->out_row_width * SIZEOF(JSAMPLE))); - } else { - upsample->pub.upsample = merged_1v_upsample; - upsample->upmethod = h2v1_merged_upsample; - /* No spare row needed */ - upsample->spare_row = NULL; - } - - build_ycc_rgb_table(cinfo); -} - -#endif /* UPSAMPLE_MERGING_SUPPORTED */ diff --git a/jpeg/jdosaobj.txt b/jpeg/jdosaobj.txt deleted file mode 100755 index 4318362..0000000 --- a/jpeg/jdosaobj.txt +++ /dev/null @@ -1,16 +0,0 @@ -This archive contains already-assembled object files for JMEMDOSA.ASM -of the Independent JPEG Group's JPEG package. These files will be helpful -if you want to compile the IJG code for DOS, but don't have an assembler. - -These files were prepared from the 3/13/1992 version of JMEMDOSA.ASM, -which is still unchanged as of mid-1998. You can use these files with -releases 3 through 6 of the IJG code, and probably future releases too. - -To use these files, copy the proper version to JMEMDOSA.OBJ. Make sure -this file has a newer date than JMEMDOSA.ASM. Then compile the code as -usual. - -Object files included: - -JDOSAMSC.OBJ For Microsoft C version 5 or later. -JDOSABCC.OBJ For Borland C version 3.0 or later. diff --git a/jpeg/jdpostct.c b/jpeg/jdpostct.c deleted file mode 100755 index 571563d..0000000 --- a/jpeg/jdpostct.c +++ /dev/null @@ -1,290 +0,0 @@ -/* - * jdpostct.c - * - * Copyright (C) 1994-1996, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains the decompression postprocessing controller. - * This controller manages the upsampling, color conversion, and color - * quantization/reduction steps; specifically, it controls the buffering - * between upsample/color conversion and color quantization/reduction. - * - * If no color quantization/reduction is required, then this module has no - * work to do, and it just hands off to the upsample/color conversion code. - * An integrated upsample/convert/quantize process would replace this module - * entirely. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* Private buffer controller object */ - -typedef struct { - struct jpeg_d_post_controller pub; /* public fields */ - - /* Color quantization source buffer: this holds output data from - * the upsample/color conversion step to be passed to the quantizer. - * For two-pass color quantization, we need a full-image buffer; - * for one-pass operation, a strip buffer is sufficient. - */ - jvirt_sarray_ptr whole_image; /* virtual array, or NULL if one-pass */ - JSAMPARRAY buffer; /* strip buffer, or current strip of virtual */ - JDIMENSION strip_height; /* buffer size in rows */ - /* for two-pass mode only: */ - JDIMENSION starting_row; /* row # of first row in current strip */ - JDIMENSION next_row; /* index of next row to fill/empty in strip */ -} my_post_controller; - -typedef my_post_controller * my_post_ptr; - - -/* Forward declarations */ -METHODDEF(void) post_process_1pass - JPP((j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, - JDIMENSION in_row_groups_avail, - JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, - JDIMENSION out_rows_avail)); -#ifdef QUANT_2PASS_SUPPORTED -METHODDEF(void) post_process_prepass - JPP((j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, - JDIMENSION in_row_groups_avail, - JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, - JDIMENSION out_rows_avail)); -METHODDEF(void) post_process_2pass - JPP((j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, - JDIMENSION in_row_groups_avail, - JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, - JDIMENSION out_rows_avail)); -#endif - - -/* - * Initialize for a processing pass. - */ - -METHODDEF(void) -start_pass_dpost (j_decompress_ptr cinfo, J_BUF_MODE pass_mode) -{ - my_post_ptr post = (my_post_ptr) cinfo->post; - - switch (pass_mode) { - case JBUF_PASS_THRU: - if (cinfo->quantize_colors) { - /* Single-pass processing with color quantization. */ - post->pub.post_process_data = post_process_1pass; - /* We could be doing buffered-image output before starting a 2-pass - * color quantization; in that case, jinit_d_post_controller did not - * allocate a strip buffer. Use the virtual-array buffer as workspace. - */ - if (post->buffer == NULL) { - post->buffer = (*cinfo->mem->access_virt_sarray) - ((j_common_ptr) cinfo, post->whole_image, - (JDIMENSION) 0, post->strip_height, TRUE); - } - } else { - /* For single-pass processing without color quantization, - * I have no work to do; just call the upsampler directly. - */ - post->pub.post_process_data = cinfo->upsample->upsample; - } - break; -#ifdef QUANT_2PASS_SUPPORTED - case JBUF_SAVE_AND_PASS: - /* First pass of 2-pass quantization */ - if (post->whole_image == NULL) - ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); - post->pub.post_process_data = post_process_prepass; - break; - case JBUF_CRANK_DEST: - /* Second pass of 2-pass quantization */ - if (post->whole_image == NULL) - ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); - post->pub.post_process_data = post_process_2pass; - break; -#endif /* QUANT_2PASS_SUPPORTED */ - default: - ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); - break; - } - post->starting_row = post->next_row = 0; -} - - -/* - * Process some data in the one-pass (strip buffer) case. - * This is used for color precision reduction as well as one-pass quantization. - */ - -METHODDEF(void) -post_process_1pass (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, - JDIMENSION in_row_groups_avail, - JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, - JDIMENSION out_rows_avail) -{ - my_post_ptr post = (my_post_ptr) cinfo->post; - JDIMENSION num_rows, max_rows; - - /* Fill the buffer, but not more than what we can dump out in one go. */ - /* Note we rely on the upsampler to detect bottom of image. */ - max_rows = out_rows_avail - *out_row_ctr; - if (max_rows > post->strip_height) - max_rows = post->strip_height; - num_rows = 0; - (*cinfo->upsample->upsample) (cinfo, - input_buf, in_row_group_ctr, in_row_groups_avail, - post->buffer, &num_rows, max_rows); - /* Quantize and emit data. */ - (*cinfo->cquantize->color_quantize) (cinfo, - post->buffer, output_buf + *out_row_ctr, (int) num_rows); - *out_row_ctr += num_rows; -} - - -#ifdef QUANT_2PASS_SUPPORTED - -/* - * Process some data in the first pass of 2-pass quantization. - */ - -METHODDEF(void) -post_process_prepass (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, - JDIMENSION in_row_groups_avail, - JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, - JDIMENSION out_rows_avail) -{ - my_post_ptr post = (my_post_ptr) cinfo->post; - JDIMENSION old_next_row, num_rows; - - /* Reposition virtual buffer if at start of strip. */ - if (post->next_row == 0) { - post->buffer = (*cinfo->mem->access_virt_sarray) - ((j_common_ptr) cinfo, post->whole_image, - post->starting_row, post->strip_height, TRUE); - } - - /* Upsample some data (up to a strip height's worth). */ - old_next_row = post->next_row; - (*cinfo->upsample->upsample) (cinfo, - input_buf, in_row_group_ctr, in_row_groups_avail, - post->buffer, &post->next_row, post->strip_height); - - /* Allow quantizer to scan new data. No data is emitted, */ - /* but we advance out_row_ctr so outer loop can tell when we're done. */ - if (post->next_row > old_next_row) { - num_rows = post->next_row - old_next_row; - (*cinfo->cquantize->color_quantize) (cinfo, post->buffer + old_next_row, - (JSAMPARRAY) NULL, (int) num_rows); - *out_row_ctr += num_rows; - } - - /* Advance if we filled the strip. */ - if (post->next_row >= post->strip_height) { - post->starting_row += post->strip_height; - post->next_row = 0; - } -} - - -/* - * Process some data in the second pass of 2-pass quantization. - */ - -METHODDEF(void) -post_process_2pass (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, - JDIMENSION in_row_groups_avail, - JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, - JDIMENSION out_rows_avail) -{ - my_post_ptr post = (my_post_ptr) cinfo->post; - JDIMENSION num_rows, max_rows; - - /* Reposition virtual buffer if at start of strip. */ - if (post->next_row == 0) { - post->buffer = (*cinfo->mem->access_virt_sarray) - ((j_common_ptr) cinfo, post->whole_image, - post->starting_row, post->strip_height, FALSE); - } - - /* Determine number of rows to emit. */ - num_rows = post->strip_height - post->next_row; /* available in strip */ - max_rows = out_rows_avail - *out_row_ctr; /* available in output area */ - if (num_rows > max_rows) - num_rows = max_rows; - /* We have to check bottom of image here, can't depend on upsampler. */ - max_rows = cinfo->output_height - post->starting_row; - if (num_rows > max_rows) - num_rows = max_rows; - - /* Quantize and emit data. */ - (*cinfo->cquantize->color_quantize) (cinfo, - post->buffer + post->next_row, output_buf + *out_row_ctr, - (int) num_rows); - *out_row_ctr += num_rows; - - /* Advance if we filled the strip. */ - post->next_row += num_rows; - if (post->next_row >= post->strip_height) { - post->starting_row += post->strip_height; - post->next_row = 0; - } -} - -#endif /* QUANT_2PASS_SUPPORTED */ - - -/* - * Initialize postprocessing controller. - */ - -GLOBAL(void) -jinit_d_post_controller (j_decompress_ptr cinfo, boolean need_full_buffer) -{ - my_post_ptr post; - - post = (my_post_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(my_post_controller)); - cinfo->post = (struct jpeg_d_post_controller *) post; - post->pub.start_pass = start_pass_dpost; - post->whole_image = NULL; /* flag for no virtual arrays */ - post->buffer = NULL; /* flag for no strip buffer */ - - /* Create the quantization buffer, if needed */ - if (cinfo->quantize_colors) { - /* The buffer strip height is max_v_samp_factor, which is typically - * an efficient number of rows for upsampling to return. - * (In the presence of output rescaling, we might want to be smarter?) - */ - post->strip_height = (JDIMENSION) cinfo->max_v_samp_factor; - if (need_full_buffer) { - /* Two-pass color quantization: need full-image storage. */ - /* We round up the number of rows to a multiple of the strip height. */ -#ifdef QUANT_2PASS_SUPPORTED - post->whole_image = (*cinfo->mem->request_virt_sarray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE, - cinfo->output_width * cinfo->out_color_components, - (JDIMENSION) jround_up((long) cinfo->output_height, - (long) post->strip_height), - post->strip_height); -#else - ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); -#endif /* QUANT_2PASS_SUPPORTED */ - } else { - /* One-pass color quantization: just make a strip buffer. */ - post->buffer = (*cinfo->mem->alloc_sarray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, - cinfo->output_width * cinfo->out_color_components, - post->strip_height); - } - } -} diff --git a/jpeg/jdsample.c b/jpeg/jdsample.c deleted file mode 100755 index 7bc8885..0000000 --- a/jpeg/jdsample.c +++ /dev/null @@ -1,361 +0,0 @@ -/* - * jdsample.c - * - * Copyright (C) 1991-1996, Thomas G. Lane. - * Modified 2002-2008 by Guido Vollbeding. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains upsampling routines. - * - * Upsampling input data is counted in "row groups". A row group - * is defined to be (v_samp_factor * DCT_v_scaled_size / min_DCT_v_scaled_size) - * sample rows of each component. Upsampling will normally produce - * max_v_samp_factor pixel rows from each row group (but this could vary - * if the upsampler is applying a scale factor of its own). - * - * An excellent reference for image resampling is - * Digital Image Warping, George Wolberg, 1990. - * Pub. by IEEE Computer Society Press, Los Alamitos, CA. ISBN 0-8186-8944-7. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* Pointer to routine to upsample a single component */ -typedef JMETHOD(void, upsample1_ptr, - (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr)); - -/* Private subobject */ - -typedef struct { - struct jpeg_upsampler pub; /* public fields */ - - /* Color conversion buffer. When using separate upsampling and color - * conversion steps, this buffer holds one upsampled row group until it - * has been color converted and output. - * Note: we do not allocate any storage for component(s) which are full-size, - * ie do not need rescaling. The corresponding entry of color_buf[] is - * simply set to point to the input data array, thereby avoiding copying. - */ - JSAMPARRAY color_buf[MAX_COMPONENTS]; - - /* Per-component upsampling method pointers */ - upsample1_ptr methods[MAX_COMPONENTS]; - - int next_row_out; /* counts rows emitted from color_buf */ - JDIMENSION rows_to_go; /* counts rows remaining in image */ - - /* Height of an input row group for each component. */ - int rowgroup_height[MAX_COMPONENTS]; - - /* These arrays save pixel expansion factors so that int_expand need not - * recompute them each time. They are unused for other upsampling methods. - */ - UINT8 h_expand[MAX_COMPONENTS]; - UINT8 v_expand[MAX_COMPONENTS]; -} my_upsampler; - -typedef my_upsampler * my_upsample_ptr; - - -/* - * Initialize for an upsampling pass. - */ - -METHODDEF(void) -start_pass_upsample (j_decompress_ptr cinfo) -{ - my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; - - /* Mark the conversion buffer empty */ - upsample->next_row_out = cinfo->max_v_samp_factor; - /* Initialize total-height counter for detecting bottom of image */ - upsample->rows_to_go = cinfo->output_height; -} - - -/* - * Control routine to do upsampling (and color conversion). - * - * In this version we upsample each component independently. - * We upsample one row group into the conversion buffer, then apply - * color conversion a row at a time. - */ - -METHODDEF(void) -sep_upsample (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, - JDIMENSION in_row_groups_avail, - JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, - JDIMENSION out_rows_avail) -{ - my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; - int ci; - jpeg_component_info * compptr; - JDIMENSION num_rows; - - /* Fill the conversion buffer, if it's empty */ - if (upsample->next_row_out >= cinfo->max_v_samp_factor) { - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - /* Invoke per-component upsample method. Notice we pass a POINTER - * to color_buf[ci], so that fullsize_upsample can change it. - */ - (*upsample->methods[ci]) (cinfo, compptr, - input_buf[ci] + (*in_row_group_ctr * upsample->rowgroup_height[ci]), - upsample->color_buf + ci); - } - upsample->next_row_out = 0; - } - - /* Color-convert and emit rows */ - - /* How many we have in the buffer: */ - num_rows = (JDIMENSION) (cinfo->max_v_samp_factor - upsample->next_row_out); - /* Not more than the distance to the end of the image. Need this test - * in case the image height is not a multiple of max_v_samp_factor: - */ - if (num_rows > upsample->rows_to_go) - num_rows = upsample->rows_to_go; - /* And not more than what the client can accept: */ - out_rows_avail -= *out_row_ctr; - if (num_rows > out_rows_avail) - num_rows = out_rows_avail; - - (*cinfo->cconvert->color_convert) (cinfo, upsample->color_buf, - (JDIMENSION) upsample->next_row_out, - output_buf + *out_row_ctr, - (int) num_rows); - - /* Adjust counts */ - *out_row_ctr += num_rows; - upsample->rows_to_go -= num_rows; - upsample->next_row_out += num_rows; - /* When the buffer is emptied, declare this input row group consumed */ - if (upsample->next_row_out >= cinfo->max_v_samp_factor) - (*in_row_group_ctr)++; -} - - -/* - * These are the routines invoked by sep_upsample to upsample pixel values - * of a single component. One row group is processed per call. - */ - - -/* - * For full-size components, we just make color_buf[ci] point at the - * input buffer, and thus avoid copying any data. Note that this is - * safe only because sep_upsample doesn't declare the input row group - * "consumed" until we are done color converting and emitting it. - */ - -METHODDEF(void) -fullsize_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr) -{ - *output_data_ptr = input_data; -} - - -/* - * This is a no-op version used for "uninteresting" components. - * These components will not be referenced by color conversion. - */ - -METHODDEF(void) -noop_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr) -{ - *output_data_ptr = NULL; /* safety check */ -} - - -/* - * This version handles any integral sampling ratios. - * This is not used for typical JPEG files, so it need not be fast. - * Nor, for that matter, is it particularly accurate: the algorithm is - * simple replication of the input pixel onto the corresponding output - * pixels. The hi-falutin sampling literature refers to this as a - * "box filter". A box filter tends to introduce visible artifacts, - * so if you are actually going to use 3:1 or 4:1 sampling ratios - * you would be well advised to improve this code. - */ - -METHODDEF(void) -int_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr) -{ - my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; - JSAMPARRAY output_data = *output_data_ptr; - register JSAMPROW inptr, outptr; - register JSAMPLE invalue; - register int h; - JSAMPROW outend; - int h_expand, v_expand; - int inrow, outrow; - - h_expand = upsample->h_expand[compptr->component_index]; - v_expand = upsample->v_expand[compptr->component_index]; - - inrow = outrow = 0; - while (outrow < cinfo->max_v_samp_factor) { - /* Generate one output row with proper horizontal expansion */ - inptr = input_data[inrow]; - outptr = output_data[outrow]; - outend = outptr + cinfo->output_width; - while (outptr < outend) { - invalue = *inptr++; /* don't need GETJSAMPLE() here */ - for (h = h_expand; h > 0; h--) { - *outptr++ = invalue; - } - } - /* Generate any additional output rows by duplicating the first one */ - if (v_expand > 1) { - jcopy_sample_rows(output_data, outrow, output_data, outrow+1, - v_expand-1, cinfo->output_width); - } - inrow++; - outrow += v_expand; - } -} - - -/* - * Fast processing for the common case of 2:1 horizontal and 1:1 vertical. - * It's still a box filter. - */ - -METHODDEF(void) -h2v1_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr) -{ - JSAMPARRAY output_data = *output_data_ptr; - register JSAMPROW inptr, outptr; - register JSAMPLE invalue; - JSAMPROW outend; - int outrow; - - for (outrow = 0; outrow < cinfo->max_v_samp_factor; outrow++) { - inptr = input_data[outrow]; - outptr = output_data[outrow]; - outend = outptr + cinfo->output_width; - while (outptr < outend) { - invalue = *inptr++; /* don't need GETJSAMPLE() here */ - *outptr++ = invalue; - *outptr++ = invalue; - } - } -} - - -/* - * Fast processing for the common case of 2:1 horizontal and 2:1 vertical. - * It's still a box filter. - */ - -METHODDEF(void) -h2v2_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr) -{ - JSAMPARRAY output_data = *output_data_ptr; - register JSAMPROW inptr, outptr; - register JSAMPLE invalue; - JSAMPROW outend; - int inrow, outrow; - - inrow = outrow = 0; - while (outrow < cinfo->max_v_samp_factor) { - inptr = input_data[inrow]; - outptr = output_data[outrow]; - outend = outptr + cinfo->output_width; - while (outptr < outend) { - invalue = *inptr++; /* don't need GETJSAMPLE() here */ - *outptr++ = invalue; - *outptr++ = invalue; - } - jcopy_sample_rows(output_data, outrow, output_data, outrow+1, - 1, cinfo->output_width); - inrow++; - outrow += 2; - } -} - - -/* - * Module initialization routine for upsampling. - */ - -GLOBAL(void) -jinit_upsampler (j_decompress_ptr cinfo) -{ - my_upsample_ptr upsample; - int ci; - jpeg_component_info * compptr; - boolean need_buffer; - int h_in_group, v_in_group, h_out_group, v_out_group; - - upsample = (my_upsample_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(my_upsampler)); - cinfo->upsample = (struct jpeg_upsampler *) upsample; - upsample->pub.start_pass = start_pass_upsample; - upsample->pub.upsample = sep_upsample; - upsample->pub.need_context_rows = FALSE; /* until we find out differently */ - - if (cinfo->CCIR601_sampling) /* this isn't supported */ - ERREXIT(cinfo, JERR_CCIR601_NOTIMPL); - - /* Verify we can handle the sampling factors, select per-component methods, - * and create storage as needed. - */ - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - /* Compute size of an "input group" after IDCT scaling. This many samples - * are to be converted to max_h_samp_factor * max_v_samp_factor pixels. - */ - h_in_group = (compptr->h_samp_factor * compptr->DCT_h_scaled_size) / - cinfo->min_DCT_h_scaled_size; - v_in_group = (compptr->v_samp_factor * compptr->DCT_v_scaled_size) / - cinfo->min_DCT_v_scaled_size; - h_out_group = cinfo->max_h_samp_factor; - v_out_group = cinfo->max_v_samp_factor; - upsample->rowgroup_height[ci] = v_in_group; /* save for use later */ - need_buffer = TRUE; - if (! compptr->component_needed) { - /* Don't bother to upsample an uninteresting component. */ - upsample->methods[ci] = noop_upsample; - need_buffer = FALSE; - } else if (h_in_group == h_out_group && v_in_group == v_out_group) { - /* Fullsize components can be processed without any work. */ - upsample->methods[ci] = fullsize_upsample; - need_buffer = FALSE; - } else if (h_in_group * 2 == h_out_group && - v_in_group == v_out_group) { - /* Special case for 2h1v upsampling */ - upsample->methods[ci] = h2v1_upsample; - } else if (h_in_group * 2 == h_out_group && - v_in_group * 2 == v_out_group) { - /* Special case for 2h2v upsampling */ - upsample->methods[ci] = h2v2_upsample; - } else if ((h_out_group % h_in_group) == 0 && - (v_out_group % v_in_group) == 0) { - /* Generic integral-factors upsampling method */ - upsample->methods[ci] = int_upsample; - upsample->h_expand[ci] = (UINT8) (h_out_group / h_in_group); - upsample->v_expand[ci] = (UINT8) (v_out_group / v_in_group); - } else - ERREXIT(cinfo, JERR_FRACT_SAMPLE_NOTIMPL); - if (need_buffer) { - upsample->color_buf[ci] = (*cinfo->mem->alloc_sarray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, - (JDIMENSION) jround_up((long) cinfo->output_width, - (long) cinfo->max_h_samp_factor), - (JDIMENSION) cinfo->max_v_samp_factor); - } - } -} diff --git a/jpeg/jdtrans.c b/jpeg/jdtrans.c deleted file mode 100755 index 22dd47f..0000000 --- a/jpeg/jdtrans.c +++ /dev/null @@ -1,140 +0,0 @@ -/* - * jdtrans.c - * - * Copyright (C) 1995-1997, Thomas G. Lane. - * Modified 2000-2009 by Guido Vollbeding. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains library routines for transcoding decompression, - * that is, reading raw DCT coefficient arrays from an input JPEG file. - * The routines in jdapimin.c will also be needed by a transcoder. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* Forward declarations */ -LOCAL(void) transdecode_master_selection JPP((j_decompress_ptr cinfo)); - - -/* - * Read the coefficient arrays from a JPEG file. - * jpeg_read_header must be completed before calling this. - * - * The entire image is read into a set of virtual coefficient-block arrays, - * one per component. The return value is a pointer to the array of - * virtual-array descriptors. These can be manipulated directly via the - * JPEG memory manager, or handed off to jpeg_write_coefficients(). - * To release the memory occupied by the virtual arrays, call - * jpeg_finish_decompress() when done with the data. - * - * An alternative usage is to simply obtain access to the coefficient arrays - * during a buffered-image-mode decompression operation. This is allowed - * after any jpeg_finish_output() call. The arrays can be accessed until - * jpeg_finish_decompress() is called. (Note that any call to the library - * may reposition the arrays, so don't rely on access_virt_barray() results - * to stay valid across library calls.) - * - * Returns NULL if suspended. This case need be checked only if - * a suspending data source is used. - */ - -GLOBAL(jvirt_barray_ptr *) -jpeg_read_coefficients (j_decompress_ptr cinfo) -{ - if (cinfo->global_state == DSTATE_READY) { - /* First call: initialize active modules */ - transdecode_master_selection(cinfo); - cinfo->global_state = DSTATE_RDCOEFS; - } - if (cinfo->global_state == DSTATE_RDCOEFS) { - /* Absorb whole file into the coef buffer */ - for (;;) { - int retcode; - /* Call progress monitor hook if present */ - if (cinfo->progress != NULL) - (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo); - /* Absorb some more input */ - retcode = (*cinfo->inputctl->consume_input) (cinfo); - if (retcode == JPEG_SUSPENDED) - return NULL; - if (retcode == JPEG_REACHED_EOI) - break; - /* Advance progress counter if appropriate */ - if (cinfo->progress != NULL && - (retcode == JPEG_ROW_COMPLETED || retcode == JPEG_REACHED_SOS)) { - if (++cinfo->progress->pass_counter >= cinfo->progress->pass_limit) { - /* startup underestimated number of scans; ratchet up one scan */ - cinfo->progress->pass_limit += (long) cinfo->total_iMCU_rows; - } - } - } - /* Set state so that jpeg_finish_decompress does the right thing */ - cinfo->global_state = DSTATE_STOPPING; - } - /* At this point we should be in state DSTATE_STOPPING if being used - * standalone, or in state DSTATE_BUFIMAGE if being invoked to get access - * to the coefficients during a full buffered-image-mode decompression. - */ - if ((cinfo->global_state == DSTATE_STOPPING || - cinfo->global_state == DSTATE_BUFIMAGE) && cinfo->buffered_image) { - return cinfo->coef->coef_arrays; - } - /* Oops, improper usage */ - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - return NULL; /* keep compiler happy */ -} - - -/* - * Master selection of decompression modules for transcoding. - * This substitutes for jdmaster.c's initialization of the full decompressor. - */ - -LOCAL(void) -transdecode_master_selection (j_decompress_ptr cinfo) -{ - /* This is effectively a buffered-image operation. */ - cinfo->buffered_image = TRUE; - - /* Compute output image dimensions and related values. */ - jpeg_core_output_dimensions(cinfo); - - /* Entropy decoding: either Huffman or arithmetic coding. */ - if (cinfo->arith_code) - jinit_arith_decoder(cinfo); - else { - jinit_huff_decoder(cinfo); - } - - /* Always get a full-image coefficient buffer. */ - jinit_d_coef_controller(cinfo, TRUE); - - /* We can now tell the memory manager to allocate virtual arrays. */ - (*cinfo->mem->realize_virt_arrays) ((j_common_ptr) cinfo); - - /* Initialize input side of decompressor to consume first scan. */ - (*cinfo->inputctl->start_input_pass) (cinfo); - - /* Initialize progress monitoring. */ - if (cinfo->progress != NULL) { - int nscans; - /* Estimate number of scans to set pass_limit. */ - if (cinfo->progressive_mode) { - /* Arbitrarily estimate 2 interleaved DC scans + 3 AC scans/component. */ - nscans = 2 + 3 * cinfo->num_components; - } else if (cinfo->inputctl->has_multiple_scans) { - /* For a nonprogressive multiscan file, estimate 1 scan per component. */ - nscans = cinfo->num_components; - } else { - nscans = 1; - } - cinfo->progress->pass_counter = 0L; - cinfo->progress->pass_limit = (long) cinfo->total_iMCU_rows * nscans; - cinfo->progress->completed_passes = 0; - cinfo->progress->total_passes = 1; - } -} diff --git a/jpeg/jerror.c b/jpeg/jerror.c deleted file mode 100755 index 3da7be8..0000000 --- a/jpeg/jerror.c +++ /dev/null @@ -1,252 +0,0 @@ -/* - * jerror.c - * - * Copyright (C) 1991-1998, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains simple error-reporting and trace-message routines. - * These are suitable for Unix-like systems and others where writing to - * stderr is the right thing to do. Many applications will want to replace - * some or all of these routines. - * - * If you define USE_WINDOWS_MESSAGEBOX in jconfig.h or in the makefile, - * you get a Windows-specific hack to display error messages in a dialog box. - * It ain't much, but it beats dropping error messages into the bit bucket, - * which is what happens to output to stderr under most Windows C compilers. - * - * These routines are used by both the compression and decompression code. - */ - -/* this is not a core library module, so it doesn't define JPEG_INTERNALS */ -#include "jinclude.h" -#include "jpeglib.h" -#include "jversion.h" -#include "jerror.h" - -#ifdef USE_WINDOWS_MESSAGEBOX -#include -#endif - -#ifndef EXIT_FAILURE /* define exit() codes if not provided */ -#define EXIT_FAILURE 1 -#endif - - -/* - * Create the message string table. - * We do this from the master message list in jerror.h by re-reading - * jerror.h with a suitable definition for macro JMESSAGE. - * The message table is made an external symbol just in case any applications - * want to refer to it directly. - */ - -#ifdef NEED_SHORT_EXTERNAL_NAMES -#define jpeg_std_message_table jMsgTable -#endif - -#define JMESSAGE(code,string) string , - -const char * const jpeg_std_message_table[] = { -#include "jerror.h" - NULL -}; - - -/* - * Error exit handler: must not return to caller. - * - * Applications may override this if they want to get control back after - * an error. Typically one would longjmp somewhere instead of exiting. - * The setjmp buffer can be made a private field within an expanded error - * handler object. Note that the info needed to generate an error message - * is stored in the error object, so you can generate the message now or - * later, at your convenience. - * You should make sure that the JPEG object is cleaned up (with jpeg_abort - * or jpeg_destroy) at some point. - */ - -METHODDEF(void) -error_exit (j_common_ptr cinfo) -{ - /* Always display the message */ - (*cinfo->err->output_message) (cinfo); - - /* Let the memory manager delete any temp files before we die */ - jpeg_destroy(cinfo); - - exit(EXIT_FAILURE); -} - - -/* - * Actual output of an error or trace message. - * Applications may override this method to send JPEG messages somewhere - * other than stderr. - * - * On Windows, printing to stderr is generally completely useless, - * so we provide optional code to produce an error-dialog popup. - * Most Windows applications will still prefer to override this routine, - * but if they don't, it'll do something at least marginally useful. - * - * NOTE: to use the library in an environment that doesn't support the - * C stdio library, you may have to delete the call to fprintf() entirely, - * not just not use this routine. - */ - -METHODDEF(void) -output_message (j_common_ptr cinfo) -{ - char buffer[JMSG_LENGTH_MAX]; - - /* Create the message */ - (*cinfo->err->format_message) (cinfo, buffer); - -#ifdef USE_WINDOWS_MESSAGEBOX - /* Display it in a message dialog box */ - MessageBox(GetActiveWindow(), buffer, "JPEG Library Error", - MB_OK | MB_ICONERROR); -#else - /* Send it to stderr, adding a newline */ - fprintf(stderr, "%s\n", buffer); -#endif -} - - -/* - * Decide whether to emit a trace or warning message. - * msg_level is one of: - * -1: recoverable corrupt-data warning, may want to abort. - * 0: important advisory messages (always display to user). - * 1: first level of tracing detail. - * 2,3,...: successively more detailed tracing messages. - * An application might override this method if it wanted to abort on warnings - * or change the policy about which messages to display. - */ - -METHODDEF(void) -emit_message (j_common_ptr cinfo, int msg_level) -{ - struct jpeg_error_mgr * err = cinfo->err; - - if (msg_level < 0) { - /* It's a warning message. Since corrupt files may generate many warnings, - * the policy implemented here is to show only the first warning, - * unless trace_level >= 3. - */ - if (err->num_warnings == 0 || err->trace_level >= 3) - (*err->output_message) (cinfo); - /* Always count warnings in num_warnings. */ - err->num_warnings++; - } else { - /* It's a trace message. Show it if trace_level >= msg_level. */ - if (err->trace_level >= msg_level) - (*err->output_message) (cinfo); - } -} - - -/* - * Format a message string for the most recent JPEG error or message. - * The message is stored into buffer, which should be at least JMSG_LENGTH_MAX - * characters. Note that no '\n' character is added to the string. - * Few applications should need to override this method. - */ - -METHODDEF(void) -format_message (j_common_ptr cinfo, char * buffer) -{ - struct jpeg_error_mgr * err = cinfo->err; - int msg_code = err->msg_code; - const char * msgtext = NULL; - const char * msgptr; - char ch; - boolean isstring; - - /* Look up message string in proper table */ - if (msg_code > 0 && msg_code <= err->last_jpeg_message) { - msgtext = err->jpeg_message_table[msg_code]; - } else if (err->addon_message_table != NULL && - msg_code >= err->first_addon_message && - msg_code <= err->last_addon_message) { - msgtext = err->addon_message_table[msg_code - err->first_addon_message]; - } - - /* Defend against bogus message number */ - if (msgtext == NULL) { - err->msg_parm.i[0] = msg_code; - msgtext = err->jpeg_message_table[0]; - } - - /* Check for string parameter, as indicated by %s in the message text */ - isstring = FALSE; - msgptr = msgtext; - while ((ch = *msgptr++) != '\0') { - if (ch == '%') { - if (*msgptr == 's') isstring = TRUE; - break; - } - } - - /* Format the message into the passed buffer */ - if (isstring) - sprintf(buffer, msgtext, err->msg_parm.s); - else - sprintf(buffer, msgtext, - err->msg_parm.i[0], err->msg_parm.i[1], - err->msg_parm.i[2], err->msg_parm.i[3], - err->msg_parm.i[4], err->msg_parm.i[5], - err->msg_parm.i[6], err->msg_parm.i[7]); -} - - -/* - * Reset error state variables at start of a new image. - * This is called during compression startup to reset trace/error - * processing to default state, without losing any application-specific - * method pointers. An application might possibly want to override - * this method if it has additional error processing state. - */ - -METHODDEF(void) -reset_error_mgr (j_common_ptr cinfo) -{ - cinfo->err->num_warnings = 0; - /* trace_level is not reset since it is an application-supplied parameter */ - cinfo->err->msg_code = 0; /* may be useful as a flag for "no error" */ -} - - -/* - * Fill in the standard error-handling methods in a jpeg_error_mgr object. - * Typical call is: - * struct jpeg_compress_struct cinfo; - * struct jpeg_error_mgr err; - * - * cinfo.err = jpeg_std_error(&err); - * after which the application may override some of the methods. - */ - -GLOBAL(struct jpeg_error_mgr *) -jpeg_std_error (struct jpeg_error_mgr * err) -{ - err->error_exit = error_exit; - err->emit_message = emit_message; - err->output_message = output_message; - err->format_message = format_message; - err->reset_error_mgr = reset_error_mgr; - - err->trace_level = 0; /* default = no tracing */ - err->num_warnings = 0; /* no warnings emitted yet */ - err->msg_code = 0; /* may be useful as a flag for "no error" */ - - /* Initialize message table pointers */ - err->jpeg_message_table = jpeg_std_message_table; - err->last_jpeg_message = (int) JMSG_LASTMSGCODE - 1; - - err->addon_message_table = NULL; - err->first_addon_message = 0; /* for safety */ - err->last_addon_message = 0; - - return err; -} diff --git a/jpeg/jerror.h b/jpeg/jerror.h deleted file mode 100755 index 1cfb2b1..0000000 --- a/jpeg/jerror.h +++ /dev/null @@ -1,304 +0,0 @@ -/* - * jerror.h - * - * Copyright (C) 1994-1997, Thomas G. Lane. - * Modified 1997-2009 by Guido Vollbeding. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file defines the error and message codes for the JPEG library. - * Edit this file to add new codes, or to translate the message strings to - * some other language. - * A set of error-reporting macros are defined too. Some applications using - * the JPEG library may wish to include this file to get the error codes - * and/or the macros. - */ - -/* - * To define the enum list of message codes, include this file without - * defining macro JMESSAGE. To create a message string table, include it - * again with a suitable JMESSAGE definition (see jerror.c for an example). - */ -#ifndef JMESSAGE -#ifndef JERROR_H -/* First time through, define the enum list */ -#define JMAKE_ENUM_LIST -#else -/* Repeated inclusions of this file are no-ops unless JMESSAGE is defined */ -#define JMESSAGE(code,string) -#endif /* JERROR_H */ -#endif /* JMESSAGE */ - -#ifdef JMAKE_ENUM_LIST - -typedef enum { - -#define JMESSAGE(code,string) code , - -#endif /* JMAKE_ENUM_LIST */ - -JMESSAGE(JMSG_NOMESSAGE, "Bogus message code %d") /* Must be first entry! */ - -/* For maintenance convenience, list is alphabetical by message code name */ -JMESSAGE(JERR_BAD_ALIGN_TYPE, "ALIGN_TYPE is wrong, please fix") -JMESSAGE(JERR_BAD_ALLOC_CHUNK, "MAX_ALLOC_CHUNK is wrong, please fix") -JMESSAGE(JERR_BAD_BUFFER_MODE, "Bogus buffer control mode") -JMESSAGE(JERR_BAD_COMPONENT_ID, "Invalid component ID %d in SOS") -JMESSAGE(JERR_BAD_CROP_SPEC, "Invalid crop request") -JMESSAGE(JERR_BAD_DCT_COEF, "DCT coefficient out of range") -JMESSAGE(JERR_BAD_DCTSIZE, "DCT scaled block size %dx%d not supported") -JMESSAGE(JERR_BAD_DROP_SAMPLING, - "Component index %d: mismatching sampling ratio %d:%d, %d:%d, %c") -JMESSAGE(JERR_BAD_HUFF_TABLE, "Bogus Huffman table definition") -JMESSAGE(JERR_BAD_IN_COLORSPACE, "Bogus input colorspace") -JMESSAGE(JERR_BAD_J_COLORSPACE, "Bogus JPEG colorspace") -JMESSAGE(JERR_BAD_LENGTH, "Bogus marker length") -JMESSAGE(JERR_BAD_LIB_VERSION, - "Wrong JPEG library version: library is %d, caller expects %d") -JMESSAGE(JERR_BAD_MCU_SIZE, "Sampling factors too large for interleaved scan") -JMESSAGE(JERR_BAD_POOL_ID, "Invalid memory pool code %d") -JMESSAGE(JERR_BAD_PRECISION, "Unsupported JPEG data precision %d") -JMESSAGE(JERR_BAD_PROGRESSION, - "Invalid progressive parameters Ss=%d Se=%d Ah=%d Al=%d") -JMESSAGE(JERR_BAD_PROG_SCRIPT, - "Invalid progressive parameters at scan script entry %d") -JMESSAGE(JERR_BAD_SAMPLING, "Bogus sampling factors") -JMESSAGE(JERR_BAD_SCAN_SCRIPT, "Invalid scan script at entry %d") -JMESSAGE(JERR_BAD_STATE, "Improper call to JPEG library in state %d") -JMESSAGE(JERR_BAD_STRUCT_SIZE, - "JPEG parameter struct mismatch: library thinks size is %u, caller expects %u") -JMESSAGE(JERR_BAD_VIRTUAL_ACCESS, "Bogus virtual array access") -JMESSAGE(JERR_BUFFER_SIZE, "Buffer passed to JPEG library is too small") -JMESSAGE(JERR_CANT_SUSPEND, "Suspension not allowed here") -JMESSAGE(JERR_CCIR601_NOTIMPL, "CCIR601 sampling not implemented yet") -JMESSAGE(JERR_COMPONENT_COUNT, "Too many color components: %d, max %d") -JMESSAGE(JERR_CONVERSION_NOTIMPL, "Unsupported color conversion request") -JMESSAGE(JERR_DAC_INDEX, "Bogus DAC index %d") -JMESSAGE(JERR_DAC_VALUE, "Bogus DAC value 0x%x") -JMESSAGE(JERR_DHT_INDEX, "Bogus DHT index %d") -JMESSAGE(JERR_DQT_INDEX, "Bogus DQT index %d") -JMESSAGE(JERR_EMPTY_IMAGE, "Empty JPEG image (DNL not supported)") -JMESSAGE(JERR_EMS_READ, "Read from EMS failed") -JMESSAGE(JERR_EMS_WRITE, "Write to EMS failed") -JMESSAGE(JERR_EOI_EXPECTED, "Didn't expect more than one scan") -JMESSAGE(JERR_FILE_READ, "Input file read error") -JMESSAGE(JERR_FILE_WRITE, "Output file write error --- out of disk space?") -JMESSAGE(JERR_FRACT_SAMPLE_NOTIMPL, "Fractional sampling not implemented yet") -JMESSAGE(JERR_HUFF_CLEN_OVERFLOW, "Huffman code size table overflow") -JMESSAGE(JERR_HUFF_MISSING_CODE, "Missing Huffman code table entry") -JMESSAGE(JERR_IMAGE_TOO_BIG, "Maximum supported image dimension is %u pixels") -JMESSAGE(JERR_INPUT_EMPTY, "Empty input file") -JMESSAGE(JERR_INPUT_EOF, "Premature end of input file") -JMESSAGE(JERR_MISMATCHED_QUANT_TABLE, - "Cannot transcode due to multiple use of quantization table %d") -JMESSAGE(JERR_MISSING_DATA, "Scan script does not transmit all data") -JMESSAGE(JERR_MODE_CHANGE, "Invalid color quantization mode change") -JMESSAGE(JERR_NOTIMPL, "Not implemented yet") -JMESSAGE(JERR_NOT_COMPILED, "Requested feature was omitted at compile time") -JMESSAGE(JERR_NO_ARITH_TABLE, "Arithmetic table 0x%02x was not defined") -JMESSAGE(JERR_NO_BACKING_STORE, "Backing store not supported") -JMESSAGE(JERR_NO_HUFF_TABLE, "Huffman table 0x%02x was not defined") -JMESSAGE(JERR_NO_IMAGE, "JPEG datastream contains no image") -JMESSAGE(JERR_NO_QUANT_TABLE, "Quantization table 0x%02x was not defined") -JMESSAGE(JERR_NO_SOI, "Not a JPEG file: starts with 0x%02x 0x%02x") -JMESSAGE(JERR_OUT_OF_MEMORY, "Insufficient memory (case %d)") -JMESSAGE(JERR_QUANT_COMPONENTS, - "Cannot quantize more than %d color components") -JMESSAGE(JERR_QUANT_FEW_COLORS, "Cannot quantize to fewer than %d colors") -JMESSAGE(JERR_QUANT_MANY_COLORS, "Cannot quantize to more than %d colors") -JMESSAGE(JERR_SOF_DUPLICATE, "Invalid JPEG file structure: two SOF markers") -JMESSAGE(JERR_SOF_NO_SOS, "Invalid JPEG file structure: missing SOS marker") -JMESSAGE(JERR_SOF_UNSUPPORTED, "Unsupported JPEG process: SOF type 0x%02x") -JMESSAGE(JERR_SOI_DUPLICATE, "Invalid JPEG file structure: two SOI markers") -JMESSAGE(JERR_SOS_NO_SOF, "Invalid JPEG file structure: SOS before SOF") -JMESSAGE(JERR_TFILE_CREATE, "Failed to create temporary file %s") -JMESSAGE(JERR_TFILE_READ, "Read failed on temporary file") -JMESSAGE(JERR_TFILE_SEEK, "Seek failed on temporary file") -JMESSAGE(JERR_TFILE_WRITE, - "Write failed on temporary file --- out of disk space?") -JMESSAGE(JERR_TOO_LITTLE_DATA, "Application transferred too few scanlines") -JMESSAGE(JERR_UNKNOWN_MARKER, "Unsupported marker type 0x%02x") -JMESSAGE(JERR_VIRTUAL_BUG, "Virtual array controller messed up") -JMESSAGE(JERR_WIDTH_OVERFLOW, "Image too wide for this implementation") -JMESSAGE(JERR_XMS_READ, "Read from XMS failed") -JMESSAGE(JERR_XMS_WRITE, "Write to XMS failed") -JMESSAGE(JMSG_COPYRIGHT, JCOPYRIGHT) -JMESSAGE(JMSG_VERSION, JVERSION) -JMESSAGE(JTRC_16BIT_TABLES, - "Caution: quantization tables are too coarse for baseline JPEG") -JMESSAGE(JTRC_ADOBE, - "Adobe APP14 marker: version %d, flags 0x%04x 0x%04x, transform %d") -JMESSAGE(JTRC_APP0, "Unknown APP0 marker (not JFIF), length %u") -JMESSAGE(JTRC_APP14, "Unknown APP14 marker (not Adobe), length %u") -JMESSAGE(JTRC_DAC, "Define Arithmetic Table 0x%02x: 0x%02x") -JMESSAGE(JTRC_DHT, "Define Huffman Table 0x%02x") -JMESSAGE(JTRC_DQT, "Define Quantization Table %d precision %d") -JMESSAGE(JTRC_DRI, "Define Restart Interval %u") -JMESSAGE(JTRC_EMS_CLOSE, "Freed EMS handle %u") -JMESSAGE(JTRC_EMS_OPEN, "Obtained EMS handle %u") -JMESSAGE(JTRC_EOI, "End Of Image") -JMESSAGE(JTRC_HUFFBITS, " %3d %3d %3d %3d %3d %3d %3d %3d") -JMESSAGE(JTRC_JFIF, "JFIF APP0 marker: version %d.%02d, density %dx%d %d") -JMESSAGE(JTRC_JFIF_BADTHUMBNAILSIZE, - "Warning: thumbnail image size does not match data length %u") -JMESSAGE(JTRC_JFIF_EXTENSION, - "JFIF extension marker: type 0x%02x, length %u") -JMESSAGE(JTRC_JFIF_THUMBNAIL, " with %d x %d thumbnail image") -JMESSAGE(JTRC_MISC_MARKER, "Miscellaneous marker 0x%02x, length %u") -JMESSAGE(JTRC_PARMLESS_MARKER, "Unexpected marker 0x%02x") -JMESSAGE(JTRC_QUANTVALS, " %4u %4u %4u %4u %4u %4u %4u %4u") -JMESSAGE(JTRC_QUANT_3_NCOLORS, "Quantizing to %d = %d*%d*%d colors") -JMESSAGE(JTRC_QUANT_NCOLORS, "Quantizing to %d colors") -JMESSAGE(JTRC_QUANT_SELECTED, "Selected %d colors for quantization") -JMESSAGE(JTRC_RECOVERY_ACTION, "At marker 0x%02x, recovery action %d") -JMESSAGE(JTRC_RST, "RST%d") -JMESSAGE(JTRC_SMOOTH_NOTIMPL, - "Smoothing not supported with nonstandard sampling ratios") -JMESSAGE(JTRC_SOF, "Start Of Frame 0x%02x: width=%u, height=%u, components=%d") -JMESSAGE(JTRC_SOF_COMPONENT, " Component %d: %dhx%dv q=%d") -JMESSAGE(JTRC_SOI, "Start of Image") -JMESSAGE(JTRC_SOS, "Start Of Scan: %d components") -JMESSAGE(JTRC_SOS_COMPONENT, " Component %d: dc=%d ac=%d") -JMESSAGE(JTRC_SOS_PARAMS, " Ss=%d, Se=%d, Ah=%d, Al=%d") -JMESSAGE(JTRC_TFILE_CLOSE, "Closed temporary file %s") -JMESSAGE(JTRC_TFILE_OPEN, "Opened temporary file %s") -JMESSAGE(JTRC_THUMB_JPEG, - "JFIF extension marker: JPEG-compressed thumbnail image, length %u") -JMESSAGE(JTRC_THUMB_PALETTE, - "JFIF extension marker: palette thumbnail image, length %u") -JMESSAGE(JTRC_THUMB_RGB, - "JFIF extension marker: RGB thumbnail image, length %u") -JMESSAGE(JTRC_UNKNOWN_IDS, - "Unrecognized component IDs %d %d %d, assuming YCbCr") -JMESSAGE(JTRC_XMS_CLOSE, "Freed XMS handle %u") -JMESSAGE(JTRC_XMS_OPEN, "Obtained XMS handle %u") -JMESSAGE(JWRN_ADOBE_XFORM, "Unknown Adobe color transform code %d") -JMESSAGE(JWRN_ARITH_BAD_CODE, "Corrupt JPEG data: bad arithmetic code") -JMESSAGE(JWRN_BOGUS_PROGRESSION, - "Inconsistent progression sequence for component %d coefficient %d") -JMESSAGE(JWRN_EXTRANEOUS_DATA, - "Corrupt JPEG data: %u extraneous bytes before marker 0x%02x") -JMESSAGE(JWRN_HIT_MARKER, "Corrupt JPEG data: premature end of data segment") -JMESSAGE(JWRN_HUFF_BAD_CODE, "Corrupt JPEG data: bad Huffman code") -JMESSAGE(JWRN_JFIF_MAJOR, "Warning: unknown JFIF revision number %d.%02d") -JMESSAGE(JWRN_JPEG_EOF, "Premature end of JPEG file") -JMESSAGE(JWRN_MUST_RESYNC, - "Corrupt JPEG data: found marker 0x%02x instead of RST%d") -JMESSAGE(JWRN_NOT_SEQUENTIAL, "Invalid SOS parameters for sequential JPEG") -JMESSAGE(JWRN_TOO_MUCH_DATA, "Application transferred too many scanlines") - -#ifdef JMAKE_ENUM_LIST - - JMSG_LASTMSGCODE -} J_MESSAGE_CODE; - -#undef JMAKE_ENUM_LIST -#endif /* JMAKE_ENUM_LIST */ - -/* Zap JMESSAGE macro so that future re-inclusions do nothing by default */ -#undef JMESSAGE - - -#ifndef JERROR_H -#define JERROR_H - -/* Macros to simplify using the error and trace message stuff */ -/* The first parameter is either type of cinfo pointer */ - -/* Fatal errors (print message and exit) */ -#define ERREXIT(cinfo,code) \ - ((cinfo)->err->msg_code = (code), \ - (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo))) -#define ERREXIT1(cinfo,code,p1) \ - ((cinfo)->err->msg_code = (code), \ - (cinfo)->err->msg_parm.i[0] = (p1), \ - (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo))) -#define ERREXIT2(cinfo,code,p1,p2) \ - ((cinfo)->err->msg_code = (code), \ - (cinfo)->err->msg_parm.i[0] = (p1), \ - (cinfo)->err->msg_parm.i[1] = (p2), \ - (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo))) -#define ERREXIT3(cinfo,code,p1,p2,p3) \ - ((cinfo)->err->msg_code = (code), \ - (cinfo)->err->msg_parm.i[0] = (p1), \ - (cinfo)->err->msg_parm.i[1] = (p2), \ - (cinfo)->err->msg_parm.i[2] = (p3), \ - (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo))) -#define ERREXIT4(cinfo,code,p1,p2,p3,p4) \ - ((cinfo)->err->msg_code = (code), \ - (cinfo)->err->msg_parm.i[0] = (p1), \ - (cinfo)->err->msg_parm.i[1] = (p2), \ - (cinfo)->err->msg_parm.i[2] = (p3), \ - (cinfo)->err->msg_parm.i[3] = (p4), \ - (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo))) -#define ERREXIT6(cinfo,code,p1,p2,p3,p4,p5,p6) \ - ((cinfo)->err->msg_code = (code), \ - (cinfo)->err->msg_parm.i[0] = (p1), \ - (cinfo)->err->msg_parm.i[1] = (p2), \ - (cinfo)->err->msg_parm.i[2] = (p3), \ - (cinfo)->err->msg_parm.i[3] = (p4), \ - (cinfo)->err->msg_parm.i[4] = (p5), \ - (cinfo)->err->msg_parm.i[5] = (p6), \ - (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo))) -#define ERREXITS(cinfo,code,str) \ - ((cinfo)->err->msg_code = (code), \ - strncpy((cinfo)->err->msg_parm.s, (str), JMSG_STR_PARM_MAX), \ - (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo))) - -#define MAKESTMT(stuff) do { stuff } while (0) - -/* Nonfatal errors (we can keep going, but the data is probably corrupt) */ -#define WARNMS(cinfo,code) \ - ((cinfo)->err->msg_code = (code), \ - (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), -1)) -#define WARNMS1(cinfo,code,p1) \ - ((cinfo)->err->msg_code = (code), \ - (cinfo)->err->msg_parm.i[0] = (p1), \ - (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), -1)) -#define WARNMS2(cinfo,code,p1,p2) \ - ((cinfo)->err->msg_code = (code), \ - (cinfo)->err->msg_parm.i[0] = (p1), \ - (cinfo)->err->msg_parm.i[1] = (p2), \ - (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), -1)) - -/* Informational/debugging messages */ -#define TRACEMS(cinfo,lvl,code) \ - ((cinfo)->err->msg_code = (code), \ - (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl))) -#define TRACEMS1(cinfo,lvl,code,p1) \ - ((cinfo)->err->msg_code = (code), \ - (cinfo)->err->msg_parm.i[0] = (p1), \ - (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl))) -#define TRACEMS2(cinfo,lvl,code,p1,p2) \ - ((cinfo)->err->msg_code = (code), \ - (cinfo)->err->msg_parm.i[0] = (p1), \ - (cinfo)->err->msg_parm.i[1] = (p2), \ - (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl))) -#define TRACEMS3(cinfo,lvl,code,p1,p2,p3) \ - MAKESTMT(int * _mp = (cinfo)->err->msg_parm.i; \ - _mp[0] = (p1); _mp[1] = (p2); _mp[2] = (p3); \ - (cinfo)->err->msg_code = (code); \ - (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl)); ) -#define TRACEMS4(cinfo,lvl,code,p1,p2,p3,p4) \ - MAKESTMT(int * _mp = (cinfo)->err->msg_parm.i; \ - _mp[0] = (p1); _mp[1] = (p2); _mp[2] = (p3); _mp[3] = (p4); \ - (cinfo)->err->msg_code = (code); \ - (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl)); ) -#define TRACEMS5(cinfo,lvl,code,p1,p2,p3,p4,p5) \ - MAKESTMT(int * _mp = (cinfo)->err->msg_parm.i; \ - _mp[0] = (p1); _mp[1] = (p2); _mp[2] = (p3); _mp[3] = (p4); \ - _mp[4] = (p5); \ - (cinfo)->err->msg_code = (code); \ - (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl)); ) -#define TRACEMS8(cinfo,lvl,code,p1,p2,p3,p4,p5,p6,p7,p8) \ - MAKESTMT(int * _mp = (cinfo)->err->msg_parm.i; \ - _mp[0] = (p1); _mp[1] = (p2); _mp[2] = (p3); _mp[3] = (p4); \ - _mp[4] = (p5); _mp[5] = (p6); _mp[6] = (p7); _mp[7] = (p8); \ - (cinfo)->err->msg_code = (code); \ - (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl)); ) -#define TRACEMSS(cinfo,lvl,code,str) \ - ((cinfo)->err->msg_code = (code), \ - strncpy((cinfo)->err->msg_parm.s, (str), JMSG_STR_PARM_MAX), \ - (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl))) - -#endif /* JERROR_H */ diff --git a/jpeg/jfdctflt.c b/jpeg/jfdctflt.c deleted file mode 100755 index 74d0d86..0000000 --- a/jpeg/jfdctflt.c +++ /dev/null @@ -1,174 +0,0 @@ -/* - * jfdctflt.c - * - * Copyright (C) 1994-1996, Thomas G. Lane. - * Modified 2003-2009 by Guido Vollbeding. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains a floating-point implementation of the - * forward DCT (Discrete Cosine Transform). - * - * This implementation should be more accurate than either of the integer - * DCT implementations. However, it may not give the same results on all - * machines because of differences in roundoff behavior. Speed will depend - * on the hardware's floating point capacity. - * - * A 2-D DCT can be done by 1-D DCT on each row followed by 1-D DCT - * on each column. Direct algorithms are also available, but they are - * much more complex and seem not to be any faster when reduced to code. - * - * This implementation is based on Arai, Agui, and Nakajima's algorithm for - * scaled DCT. Their original paper (Trans. IEICE E-71(11):1095) is in - * Japanese, but the algorithm is described in the Pennebaker & Mitchell - * JPEG textbook (see REFERENCES section in file README). The following code - * is based directly on figure 4-8 in P&M. - * While an 8-point DCT cannot be done in less than 11 multiplies, it is - * possible to arrange the computation so that many of the multiplies are - * simple scalings of the final outputs. These multiplies can then be - * folded into the multiplications or divisions by the JPEG quantization - * table entries. The AA&N method leaves only 5 multiplies and 29 adds - * to be done in the DCT itself. - * The primary disadvantage of this method is that with a fixed-point - * implementation, accuracy is lost due to imprecise representation of the - * scaled quantization values. However, that problem does not arise if - * we use floating point arithmetic. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" -#include "jdct.h" /* Private declarations for DCT subsystem */ - -#ifdef DCT_FLOAT_SUPPORTED - - -/* - * This module is specialized to the case DCTSIZE = 8. - */ - -#if DCTSIZE != 8 - Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */ -#endif - - -/* - * Perform the forward DCT on one block of samples. - */ - -GLOBAL(void) -jpeg_fdct_float (FAST_FLOAT * data, JSAMPARRAY sample_data, JDIMENSION start_col) -{ - FAST_FLOAT tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7; - FAST_FLOAT tmp10, tmp11, tmp12, tmp13; - FAST_FLOAT z1, z2, z3, z4, z5, z11, z13; - FAST_FLOAT *dataptr; - JSAMPROW elemptr; - int ctr; - - /* Pass 1: process rows. */ - - dataptr = data; - for (ctr = 0; ctr < DCTSIZE; ctr++) { - elemptr = sample_data[ctr] + start_col; - - /* Load data into workspace */ - tmp0 = (FAST_FLOAT) (GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[7])); - tmp7 = (FAST_FLOAT) (GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[7])); - tmp1 = (FAST_FLOAT) (GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[6])); - tmp6 = (FAST_FLOAT) (GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[6])); - tmp2 = (FAST_FLOAT) (GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[5])); - tmp5 = (FAST_FLOAT) (GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[5])); - tmp3 = (FAST_FLOAT) (GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[4])); - tmp4 = (FAST_FLOAT) (GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[4])); - - /* Even part */ - - tmp10 = tmp0 + tmp3; /* phase 2 */ - tmp13 = tmp0 - tmp3; - tmp11 = tmp1 + tmp2; - tmp12 = tmp1 - tmp2; - - /* Apply unsigned->signed conversion */ - dataptr[0] = tmp10 + tmp11 - 8 * CENTERJSAMPLE; /* phase 3 */ - dataptr[4] = tmp10 - tmp11; - - z1 = (tmp12 + tmp13) * ((FAST_FLOAT) 0.707106781); /* c4 */ - dataptr[2] = tmp13 + z1; /* phase 5 */ - dataptr[6] = tmp13 - z1; - - /* Odd part */ - - tmp10 = tmp4 + tmp5; /* phase 2 */ - tmp11 = tmp5 + tmp6; - tmp12 = tmp6 + tmp7; - - /* The rotator is modified from fig 4-8 to avoid extra negations. */ - z5 = (tmp10 - tmp12) * ((FAST_FLOAT) 0.382683433); /* c6 */ - z2 = ((FAST_FLOAT) 0.541196100) * tmp10 + z5; /* c2-c6 */ - z4 = ((FAST_FLOAT) 1.306562965) * tmp12 + z5; /* c2+c6 */ - z3 = tmp11 * ((FAST_FLOAT) 0.707106781); /* c4 */ - - z11 = tmp7 + z3; /* phase 5 */ - z13 = tmp7 - z3; - - dataptr[5] = z13 + z2; /* phase 6 */ - dataptr[3] = z13 - z2; - dataptr[1] = z11 + z4; - dataptr[7] = z11 - z4; - - dataptr += DCTSIZE; /* advance pointer to next row */ - } - - /* Pass 2: process columns. */ - - dataptr = data; - for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { - tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*7]; - tmp7 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*7]; - tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*6]; - tmp6 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*6]; - tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*5]; - tmp5 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*5]; - tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*4]; - tmp4 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*4]; - - /* Even part */ - - tmp10 = tmp0 + tmp3; /* phase 2 */ - tmp13 = tmp0 - tmp3; - tmp11 = tmp1 + tmp2; - tmp12 = tmp1 - tmp2; - - dataptr[DCTSIZE*0] = tmp10 + tmp11; /* phase 3 */ - dataptr[DCTSIZE*4] = tmp10 - tmp11; - - z1 = (tmp12 + tmp13) * ((FAST_FLOAT) 0.707106781); /* c4 */ - dataptr[DCTSIZE*2] = tmp13 + z1; /* phase 5 */ - dataptr[DCTSIZE*6] = tmp13 - z1; - - /* Odd part */ - - tmp10 = tmp4 + tmp5; /* phase 2 */ - tmp11 = tmp5 + tmp6; - tmp12 = tmp6 + tmp7; - - /* The rotator is modified from fig 4-8 to avoid extra negations. */ - z5 = (tmp10 - tmp12) * ((FAST_FLOAT) 0.382683433); /* c6 */ - z2 = ((FAST_FLOAT) 0.541196100) * tmp10 + z5; /* c2-c6 */ - z4 = ((FAST_FLOAT) 1.306562965) * tmp12 + z5; /* c2+c6 */ - z3 = tmp11 * ((FAST_FLOAT) 0.707106781); /* c4 */ - - z11 = tmp7 + z3; /* phase 5 */ - z13 = tmp7 - z3; - - dataptr[DCTSIZE*5] = z13 + z2; /* phase 6 */ - dataptr[DCTSIZE*3] = z13 - z2; - dataptr[DCTSIZE*1] = z11 + z4; - dataptr[DCTSIZE*7] = z11 - z4; - - dataptr++; /* advance pointer to next column */ - } -} - -#endif /* DCT_FLOAT_SUPPORTED */ diff --git a/jpeg/jfdctfst.c b/jpeg/jfdctfst.c deleted file mode 100755 index 8cad5f2..0000000 --- a/jpeg/jfdctfst.c +++ /dev/null @@ -1,230 +0,0 @@ -/* - * jfdctfst.c - * - * Copyright (C) 1994-1996, Thomas G. Lane. - * Modified 2003-2009 by Guido Vollbeding. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains a fast, not so accurate integer implementation of the - * forward DCT (Discrete Cosine Transform). - * - * A 2-D DCT can be done by 1-D DCT on each row followed by 1-D DCT - * on each column. Direct algorithms are also available, but they are - * much more complex and seem not to be any faster when reduced to code. - * - * This implementation is based on Arai, Agui, and Nakajima's algorithm for - * scaled DCT. Their original paper (Trans. IEICE E-71(11):1095) is in - * Japanese, but the algorithm is described in the Pennebaker & Mitchell - * JPEG textbook (see REFERENCES section in file README). The following code - * is based directly on figure 4-8 in P&M. - * While an 8-point DCT cannot be done in less than 11 multiplies, it is - * possible to arrange the computation so that many of the multiplies are - * simple scalings of the final outputs. These multiplies can then be - * folded into the multiplications or divisions by the JPEG quantization - * table entries. The AA&N method leaves only 5 multiplies and 29 adds - * to be done in the DCT itself. - * The primary disadvantage of this method is that with fixed-point math, - * accuracy is lost due to imprecise representation of the scaled - * quantization values. The smaller the quantization table entry, the less - * precise the scaled value, so this implementation does worse with high- - * quality-setting files than with low-quality ones. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" -#include "jdct.h" /* Private declarations for DCT subsystem */ - -#ifdef DCT_IFAST_SUPPORTED - - -/* - * This module is specialized to the case DCTSIZE = 8. - */ - -#if DCTSIZE != 8 - Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */ -#endif - - -/* Scaling decisions are generally the same as in the LL&M algorithm; - * see jfdctint.c for more details. However, we choose to descale - * (right shift) multiplication products as soon as they are formed, - * rather than carrying additional fractional bits into subsequent additions. - * This compromises accuracy slightly, but it lets us save a few shifts. - * More importantly, 16-bit arithmetic is then adequate (for 8-bit samples) - * everywhere except in the multiplications proper; this saves a good deal - * of work on 16-bit-int machines. - * - * Again to save a few shifts, the intermediate results between pass 1 and - * pass 2 are not upscaled, but are represented only to integral precision. - * - * A final compromise is to represent the multiplicative constants to only - * 8 fractional bits, rather than 13. This saves some shifting work on some - * machines, and may also reduce the cost of multiplication (since there - * are fewer one-bits in the constants). - */ - -#define CONST_BITS 8 - - -/* Some C compilers fail to reduce "FIX(constant)" at compile time, thus - * causing a lot of useless floating-point operations at run time. - * To get around this we use the following pre-calculated constants. - * If you change CONST_BITS you may want to add appropriate values. - * (With a reasonable C compiler, you can just rely on the FIX() macro...) - */ - -#if CONST_BITS == 8 -#define FIX_0_382683433 ((INT32) 98) /* FIX(0.382683433) */ -#define FIX_0_541196100 ((INT32) 139) /* FIX(0.541196100) */ -#define FIX_0_707106781 ((INT32) 181) /* FIX(0.707106781) */ -#define FIX_1_306562965 ((INT32) 334) /* FIX(1.306562965) */ -#else -#define FIX_0_382683433 FIX(0.382683433) -#define FIX_0_541196100 FIX(0.541196100) -#define FIX_0_707106781 FIX(0.707106781) -#define FIX_1_306562965 FIX(1.306562965) -#endif - - -/* We can gain a little more speed, with a further compromise in accuracy, - * by omitting the addition in a descaling shift. This yields an incorrectly - * rounded result half the time... - */ - -#ifndef USE_ACCURATE_ROUNDING -#undef DESCALE -#define DESCALE(x,n) RIGHT_SHIFT(x, n) -#endif - - -/* Multiply a DCTELEM variable by an INT32 constant, and immediately - * descale to yield a DCTELEM result. - */ - -#define MULTIPLY(var,const) ((DCTELEM) DESCALE((var) * (const), CONST_BITS)) - - -/* - * Perform the forward DCT on one block of samples. - */ - -GLOBAL(void) -jpeg_fdct_ifast (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) -{ - DCTELEM tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7; - DCTELEM tmp10, tmp11, tmp12, tmp13; - DCTELEM z1, z2, z3, z4, z5, z11, z13; - DCTELEM *dataptr; - JSAMPROW elemptr; - int ctr; - SHIFT_TEMPS - - /* Pass 1: process rows. */ - - dataptr = data; - for (ctr = 0; ctr < DCTSIZE; ctr++) { - elemptr = sample_data[ctr] + start_col; - - /* Load data into workspace */ - tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[7]); - tmp7 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[7]); - tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[6]); - tmp6 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[6]); - tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[5]); - tmp5 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[5]); - tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[4]); - tmp4 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[4]); - - /* Even part */ - - tmp10 = tmp0 + tmp3; /* phase 2 */ - tmp13 = tmp0 - tmp3; - tmp11 = tmp1 + tmp2; - tmp12 = tmp1 - tmp2; - - /* Apply unsigned->signed conversion */ - dataptr[0] = tmp10 + tmp11 - 8 * CENTERJSAMPLE; /* phase 3 */ - dataptr[4] = tmp10 - tmp11; - - z1 = MULTIPLY(tmp12 + tmp13, FIX_0_707106781); /* c4 */ - dataptr[2] = tmp13 + z1; /* phase 5 */ - dataptr[6] = tmp13 - z1; - - /* Odd part */ - - tmp10 = tmp4 + tmp5; /* phase 2 */ - tmp11 = tmp5 + tmp6; - tmp12 = tmp6 + tmp7; - - /* The rotator is modified from fig 4-8 to avoid extra negations. */ - z5 = MULTIPLY(tmp10 - tmp12, FIX_0_382683433); /* c6 */ - z2 = MULTIPLY(tmp10, FIX_0_541196100) + z5; /* c2-c6 */ - z4 = MULTIPLY(tmp12, FIX_1_306562965) + z5; /* c2+c6 */ - z3 = MULTIPLY(tmp11, FIX_0_707106781); /* c4 */ - - z11 = tmp7 + z3; /* phase 5 */ - z13 = tmp7 - z3; - - dataptr[5] = z13 + z2; /* phase 6 */ - dataptr[3] = z13 - z2; - dataptr[1] = z11 + z4; - dataptr[7] = z11 - z4; - - dataptr += DCTSIZE; /* advance pointer to next row */ - } - - /* Pass 2: process columns. */ - - dataptr = data; - for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { - tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*7]; - tmp7 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*7]; - tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*6]; - tmp6 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*6]; - tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*5]; - tmp5 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*5]; - tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*4]; - tmp4 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*4]; - - /* Even part */ - - tmp10 = tmp0 + tmp3; /* phase 2 */ - tmp13 = tmp0 - tmp3; - tmp11 = tmp1 + tmp2; - tmp12 = tmp1 - tmp2; - - dataptr[DCTSIZE*0] = tmp10 + tmp11; /* phase 3 */ - dataptr[DCTSIZE*4] = tmp10 - tmp11; - - z1 = MULTIPLY(tmp12 + tmp13, FIX_0_707106781); /* c4 */ - dataptr[DCTSIZE*2] = tmp13 + z1; /* phase 5 */ - dataptr[DCTSIZE*6] = tmp13 - z1; - - /* Odd part */ - - tmp10 = tmp4 + tmp5; /* phase 2 */ - tmp11 = tmp5 + tmp6; - tmp12 = tmp6 + tmp7; - - /* The rotator is modified from fig 4-8 to avoid extra negations. */ - z5 = MULTIPLY(tmp10 - tmp12, FIX_0_382683433); /* c6 */ - z2 = MULTIPLY(tmp10, FIX_0_541196100) + z5; /* c2-c6 */ - z4 = MULTIPLY(tmp12, FIX_1_306562965) + z5; /* c2+c6 */ - z3 = MULTIPLY(tmp11, FIX_0_707106781); /* c4 */ - - z11 = tmp7 + z3; /* phase 5 */ - z13 = tmp7 - z3; - - dataptr[DCTSIZE*5] = z13 + z2; /* phase 6 */ - dataptr[DCTSIZE*3] = z13 - z2; - dataptr[DCTSIZE*1] = z11 + z4; - dataptr[DCTSIZE*7] = z11 - z4; - - dataptr++; /* advance pointer to next column */ - } -} - -#endif /* DCT_IFAST_SUPPORTED */ diff --git a/jpeg/jfdctint.c b/jpeg/jfdctint.c deleted file mode 100755 index 1dde58c..0000000 --- a/jpeg/jfdctint.c +++ /dev/null @@ -1,4348 +0,0 @@ -/* - * jfdctint.c - * - * Copyright (C) 1991-1996, Thomas G. Lane. - * Modification developed 2003-2009 by Guido Vollbeding. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains a slow-but-accurate integer implementation of the - * forward DCT (Discrete Cosine Transform). - * - * A 2-D DCT can be done by 1-D DCT on each row followed by 1-D DCT - * on each column. Direct algorithms are also available, but they are - * much more complex and seem not to be any faster when reduced to code. - * - * This implementation is based on an algorithm described in - * C. Loeffler, A. Ligtenberg and G. Moschytz, "Practical Fast 1-D DCT - * Algorithms with 11 Multiplications", Proc. Int'l. Conf. on Acoustics, - * Speech, and Signal Processing 1989 (ICASSP '89), pp. 988-991. - * The primary algorithm described there uses 11 multiplies and 29 adds. - * We use their alternate method with 12 multiplies and 32 adds. - * The advantage of this method is that no data path contains more than one - * multiplication; this allows a very simple and accurate implementation in - * scaled fixed-point arithmetic, with a minimal number of shifts. - * - * We also provide FDCT routines with various input sample block sizes for - * direct resolution reduction or enlargement and for direct resolving the - * common 2x1 and 1x2 subsampling cases without additional resampling: NxN - * (N=1...16), 2NxN, and Nx2N (N=1...8) pixels for one 8x8 output DCT block. - * - * For N<8 we fill the remaining block coefficients with zero. - * For N>8 we apply a partial N-point FDCT on the input samples, computing - * just the lower 8 frequency coefficients and discarding the rest. - * - * We must scale the output coefficients of the N-point FDCT appropriately - * to the standard 8-point FDCT level by 8/N per 1-D pass. This scaling - * is folded into the constant multipliers (pass 2) and/or final/initial - * shifting. - * - * CAUTION: We rely on the FIX() macro except for the N=1,2,4,8 cases - * since there would be too many additional constants to pre-calculate. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" -#include "jdct.h" /* Private declarations for DCT subsystem */ - -#ifdef DCT_ISLOW_SUPPORTED - - -/* - * This module is specialized to the case DCTSIZE = 8. - */ - -#if DCTSIZE != 8 - Sorry, this code only copes with 8x8 DCT blocks. /* deliberate syntax err */ -#endif - - -/* - * The poop on this scaling stuff is as follows: - * - * Each 1-D DCT step produces outputs which are a factor of sqrt(N) - * larger than the true DCT outputs. The final outputs are therefore - * a factor of N larger than desired; since N=8 this can be cured by - * a simple right shift at the end of the algorithm. The advantage of - * this arrangement is that we save two multiplications per 1-D DCT, - * because the y0 and y4 outputs need not be divided by sqrt(N). - * In the IJG code, this factor of 8 is removed by the quantization step - * (in jcdctmgr.c), NOT in this module. - * - * We have to do addition and subtraction of the integer inputs, which - * is no problem, and multiplication by fractional constants, which is - * a problem to do in integer arithmetic. We multiply all the constants - * by CONST_SCALE and convert them to integer constants (thus retaining - * CONST_BITS bits of precision in the constants). After doing a - * multiplication we have to divide the product by CONST_SCALE, with proper - * rounding, to produce the correct output. This division can be done - * cheaply as a right shift of CONST_BITS bits. We postpone shifting - * as long as possible so that partial sums can be added together with - * full fractional precision. - * - * The outputs of the first pass are scaled up by PASS1_BITS bits so that - * they are represented to better-than-integral precision. These outputs - * require BITS_IN_JSAMPLE + PASS1_BITS + 3 bits; this fits in a 16-bit word - * with the recommended scaling. (For 12-bit sample data, the intermediate - * array is INT32 anyway.) - * - * To avoid overflow of the 32-bit intermediate results in pass 2, we must - * have BITS_IN_JSAMPLE + CONST_BITS + PASS1_BITS <= 26. Error analysis - * shows that the values given below are the most effective. - */ - -#if BITS_IN_JSAMPLE == 8 -#define CONST_BITS 13 -#define PASS1_BITS 2 -#else -#define CONST_BITS 13 -#define PASS1_BITS 1 /* lose a little precision to avoid overflow */ -#endif - -/* Some C compilers fail to reduce "FIX(constant)" at compile time, thus - * causing a lot of useless floating-point operations at run time. - * To get around this we use the following pre-calculated constants. - * If you change CONST_BITS you may want to add appropriate values. - * (With a reasonable C compiler, you can just rely on the FIX() macro...) - */ - -#if CONST_BITS == 13 -#define FIX_0_298631336 ((INT32) 2446) /* FIX(0.298631336) */ -#define FIX_0_390180644 ((INT32) 3196) /* FIX(0.390180644) */ -#define FIX_0_541196100 ((INT32) 4433) /* FIX(0.541196100) */ -#define FIX_0_765366865 ((INT32) 6270) /* FIX(0.765366865) */ -#define FIX_0_899976223 ((INT32) 7373) /* FIX(0.899976223) */ -#define FIX_1_175875602 ((INT32) 9633) /* FIX(1.175875602) */ -#define FIX_1_501321110 ((INT32) 12299) /* FIX(1.501321110) */ -#define FIX_1_847759065 ((INT32) 15137) /* FIX(1.847759065) */ -#define FIX_1_961570560 ((INT32) 16069) /* FIX(1.961570560) */ -#define FIX_2_053119869 ((INT32) 16819) /* FIX(2.053119869) */ -#define FIX_2_562915447 ((INT32) 20995) /* FIX(2.562915447) */ -#define FIX_3_072711026 ((INT32) 25172) /* FIX(3.072711026) */ -#else -#define FIX_0_298631336 FIX(0.298631336) -#define FIX_0_390180644 FIX(0.390180644) -#define FIX_0_541196100 FIX(0.541196100) -#define FIX_0_765366865 FIX(0.765366865) -#define FIX_0_899976223 FIX(0.899976223) -#define FIX_1_175875602 FIX(1.175875602) -#define FIX_1_501321110 FIX(1.501321110) -#define FIX_1_847759065 FIX(1.847759065) -#define FIX_1_961570560 FIX(1.961570560) -#define FIX_2_053119869 FIX(2.053119869) -#define FIX_2_562915447 FIX(2.562915447) -#define FIX_3_072711026 FIX(3.072711026) -#endif - - -/* Multiply an INT32 variable by an INT32 constant to yield an INT32 result. - * For 8-bit samples with the recommended scaling, all the variable - * and constant values involved are no more than 16 bits wide, so a - * 16x16->32 bit multiply can be used instead of a full 32x32 multiply. - * For 12-bit samples, a full 32-bit multiplication will be needed. - */ - -#if BITS_IN_JSAMPLE == 8 -#define MULTIPLY(var,const) MULTIPLY16C16(var,const) -#else -#define MULTIPLY(var,const) ((var) * (const)) -#endif - - -/* - * Perform the forward DCT on one block of samples. - */ - -GLOBAL(void) -jpeg_fdct_islow (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) -{ - INT32 tmp0, tmp1, tmp2, tmp3; - INT32 tmp10, tmp11, tmp12, tmp13; - INT32 z1; - DCTELEM *dataptr; - JSAMPROW elemptr; - int ctr; - SHIFT_TEMPS - - /* Pass 1: process rows. */ - /* Note results are scaled up by sqrt(8) compared to a true DCT; */ - /* furthermore, we scale the results by 2**PASS1_BITS. */ - - dataptr = data; - for (ctr = 0; ctr < DCTSIZE; ctr++) { - elemptr = sample_data[ctr] + start_col; - - /* Even part per LL&M figure 1 --- note that published figure is faulty; - * rotator "sqrt(2)*c1" should be "sqrt(2)*c6". - */ - - tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[7]); - tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[6]); - tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[5]); - tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[4]); - - tmp10 = tmp0 + tmp3; - tmp12 = tmp0 - tmp3; - tmp11 = tmp1 + tmp2; - tmp13 = tmp1 - tmp2; - - tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[7]); - tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[6]); - tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[5]); - tmp3 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[4]); - - /* Apply unsigned->signed conversion */ - dataptr[0] = (DCTELEM) ((tmp10 + tmp11 - 8 * CENTERJSAMPLE) << PASS1_BITS); - dataptr[4] = (DCTELEM) ((tmp10 - tmp11) << PASS1_BITS); - - z1 = MULTIPLY(tmp12 + tmp13, FIX_0_541196100); - /* Add fudge factor here for final descale. */ - z1 += ONE << (CONST_BITS-PASS1_BITS-1); - dataptr[2] = (DCTELEM) RIGHT_SHIFT(z1 + MULTIPLY(tmp12, FIX_0_765366865), - CONST_BITS-PASS1_BITS); - dataptr[6] = (DCTELEM) RIGHT_SHIFT(z1 - MULTIPLY(tmp13, FIX_1_847759065), - CONST_BITS-PASS1_BITS); - - /* Odd part per figure 8 --- note paper omits factor of sqrt(2). - * cK represents sqrt(2) * cos(K*pi/16). - * i0..i3 in the paper are tmp0..tmp3 here. - */ - - tmp10 = tmp0 + tmp3; - tmp11 = tmp1 + tmp2; - tmp12 = tmp0 + tmp2; - tmp13 = tmp1 + tmp3; - z1 = MULTIPLY(tmp12 + tmp13, FIX_1_175875602); /* c3 */ - /* Add fudge factor here for final descale. */ - z1 += ONE << (CONST_BITS-PASS1_BITS-1); - - tmp0 = MULTIPLY(tmp0, FIX_1_501321110); /* c1+c3-c5-c7 */ - tmp1 = MULTIPLY(tmp1, FIX_3_072711026); /* c1+c3+c5-c7 */ - tmp2 = MULTIPLY(tmp2, FIX_2_053119869); /* c1+c3-c5+c7 */ - tmp3 = MULTIPLY(tmp3, FIX_0_298631336); /* -c1+c3+c5-c7 */ - tmp10 = MULTIPLY(tmp10, - FIX_0_899976223); /* c7-c3 */ - tmp11 = MULTIPLY(tmp11, - FIX_2_562915447); /* -c1-c3 */ - tmp12 = MULTIPLY(tmp12, - FIX_0_390180644); /* c5-c3 */ - tmp13 = MULTIPLY(tmp13, - FIX_1_961570560); /* -c3-c5 */ - - tmp12 += z1; - tmp13 += z1; - - dataptr[1] = (DCTELEM) - RIGHT_SHIFT(tmp0 + tmp10 + tmp12, CONST_BITS-PASS1_BITS); - dataptr[3] = (DCTELEM) - RIGHT_SHIFT(tmp1 + tmp11 + tmp13, CONST_BITS-PASS1_BITS); - dataptr[5] = (DCTELEM) - RIGHT_SHIFT(tmp2 + tmp11 + tmp12, CONST_BITS-PASS1_BITS); - dataptr[7] = (DCTELEM) - RIGHT_SHIFT(tmp3 + tmp10 + tmp13, CONST_BITS-PASS1_BITS); - - dataptr += DCTSIZE; /* advance pointer to next row */ - } - - /* Pass 2: process columns. - * We remove the PASS1_BITS scaling, but leave the results scaled up - * by an overall factor of 8. - */ - - dataptr = data; - for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { - /* Even part per LL&M figure 1 --- note that published figure is faulty; - * rotator "sqrt(2)*c1" should be "sqrt(2)*c6". - */ - - tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*7]; - tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*6]; - tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*5]; - tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*4]; - - /* Add fudge factor here for final descale. */ - tmp10 = tmp0 + tmp3 + (ONE << (PASS1_BITS-1)); - tmp12 = tmp0 - tmp3; - tmp11 = tmp1 + tmp2; - tmp13 = tmp1 - tmp2; - - tmp0 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*7]; - tmp1 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*6]; - tmp2 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*5]; - tmp3 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*4]; - - dataptr[DCTSIZE*0] = (DCTELEM) RIGHT_SHIFT(tmp10 + tmp11, PASS1_BITS); - dataptr[DCTSIZE*4] = (DCTELEM) RIGHT_SHIFT(tmp10 - tmp11, PASS1_BITS); - - z1 = MULTIPLY(tmp12 + tmp13, FIX_0_541196100); - /* Add fudge factor here for final descale. */ - z1 += ONE << (CONST_BITS+PASS1_BITS-1); - dataptr[DCTSIZE*2] = (DCTELEM) - RIGHT_SHIFT(z1 + MULTIPLY(tmp12, FIX_0_765366865), CONST_BITS+PASS1_BITS); - dataptr[DCTSIZE*6] = (DCTELEM) - RIGHT_SHIFT(z1 - MULTIPLY(tmp13, FIX_1_847759065), CONST_BITS+PASS1_BITS); - - /* Odd part per figure 8 --- note paper omits factor of sqrt(2). - * cK represents sqrt(2) * cos(K*pi/16). - * i0..i3 in the paper are tmp0..tmp3 here. - */ - - tmp10 = tmp0 + tmp3; - tmp11 = tmp1 + tmp2; - tmp12 = tmp0 + tmp2; - tmp13 = tmp1 + tmp3; - z1 = MULTIPLY(tmp12 + tmp13, FIX_1_175875602); /* c3 */ - /* Add fudge factor here for final descale. */ - z1 += ONE << (CONST_BITS+PASS1_BITS-1); - - tmp0 = MULTIPLY(tmp0, FIX_1_501321110); /* c1+c3-c5-c7 */ - tmp1 = MULTIPLY(tmp1, FIX_3_072711026); /* c1+c3+c5-c7 */ - tmp2 = MULTIPLY(tmp2, FIX_2_053119869); /* c1+c3-c5+c7 */ - tmp3 = MULTIPLY(tmp3, FIX_0_298631336); /* -c1+c3+c5-c7 */ - tmp10 = MULTIPLY(tmp10, - FIX_0_899976223); /* c7-c3 */ - tmp11 = MULTIPLY(tmp11, - FIX_2_562915447); /* -c1-c3 */ - tmp12 = MULTIPLY(tmp12, - FIX_0_390180644); /* c5-c3 */ - tmp13 = MULTIPLY(tmp13, - FIX_1_961570560); /* -c3-c5 */ - - tmp12 += z1; - tmp13 += z1; - - dataptr[DCTSIZE*1] = (DCTELEM) - RIGHT_SHIFT(tmp0 + tmp10 + tmp12, CONST_BITS+PASS1_BITS); - dataptr[DCTSIZE*3] = (DCTELEM) - RIGHT_SHIFT(tmp1 + tmp11 + tmp13, CONST_BITS+PASS1_BITS); - dataptr[DCTSIZE*5] = (DCTELEM) - RIGHT_SHIFT(tmp2 + tmp11 + tmp12, CONST_BITS+PASS1_BITS); - dataptr[DCTSIZE*7] = (DCTELEM) - RIGHT_SHIFT(tmp3 + tmp10 + tmp13, CONST_BITS+PASS1_BITS); - - dataptr++; /* advance pointer to next column */ - } -} - -#ifdef DCT_SCALING_SUPPORTED - - -/* - * Perform the forward DCT on a 7x7 sample block. - */ - -GLOBAL(void) -jpeg_fdct_7x7 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) -{ - INT32 tmp0, tmp1, tmp2, tmp3; - INT32 tmp10, tmp11, tmp12; - INT32 z1, z2, z3; - DCTELEM *dataptr; - JSAMPROW elemptr; - int ctr; - SHIFT_TEMPS - - /* Pre-zero output coefficient block. */ - MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); - - /* Pass 1: process rows. */ - /* Note results are scaled up by sqrt(8) compared to a true DCT; */ - /* furthermore, we scale the results by 2**PASS1_BITS. */ - /* cK represents sqrt(2) * cos(K*pi/14). */ - - dataptr = data; - for (ctr = 0; ctr < 7; ctr++) { - elemptr = sample_data[ctr] + start_col; - - /* Even part */ - - tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[6]); - tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[5]); - tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[4]); - tmp3 = GETJSAMPLE(elemptr[3]); - - tmp10 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[6]); - tmp11 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[5]); - tmp12 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[4]); - - z1 = tmp0 + tmp2; - /* Apply unsigned->signed conversion */ - dataptr[0] = (DCTELEM) - ((z1 + tmp1 + tmp3 - 7 * CENTERJSAMPLE) << PASS1_BITS); - tmp3 += tmp3; - z1 -= tmp3; - z1 -= tmp3; - z1 = MULTIPLY(z1, FIX(0.353553391)); /* (c2+c6-c4)/2 */ - z2 = MULTIPLY(tmp0 - tmp2, FIX(0.920609002)); /* (c2+c4-c6)/2 */ - z3 = MULTIPLY(tmp1 - tmp2, FIX(0.314692123)); /* c6 */ - dataptr[2] = (DCTELEM) DESCALE(z1 + z2 + z3, CONST_BITS-PASS1_BITS); - z1 -= z2; - z2 = MULTIPLY(tmp0 - tmp1, FIX(0.881747734)); /* c4 */ - dataptr[4] = (DCTELEM) - DESCALE(z2 + z3 - MULTIPLY(tmp1 - tmp3, FIX(0.707106781)), /* c2+c6-c4 */ - CONST_BITS-PASS1_BITS); - dataptr[6] = (DCTELEM) DESCALE(z1 + z2, CONST_BITS-PASS1_BITS); - - /* Odd part */ - - tmp1 = MULTIPLY(tmp10 + tmp11, FIX(0.935414347)); /* (c3+c1-c5)/2 */ - tmp2 = MULTIPLY(tmp10 - tmp11, FIX(0.170262339)); /* (c3+c5-c1)/2 */ - tmp0 = tmp1 - tmp2; - tmp1 += tmp2; - tmp2 = MULTIPLY(tmp11 + tmp12, - FIX(1.378756276)); /* -c1 */ - tmp1 += tmp2; - tmp3 = MULTIPLY(tmp10 + tmp12, FIX(0.613604268)); /* c5 */ - tmp0 += tmp3; - tmp2 += tmp3 + MULTIPLY(tmp12, FIX(1.870828693)); /* c3+c1-c5 */ - - dataptr[1] = (DCTELEM) DESCALE(tmp0, CONST_BITS-PASS1_BITS); - dataptr[3] = (DCTELEM) DESCALE(tmp1, CONST_BITS-PASS1_BITS); - dataptr[5] = (DCTELEM) DESCALE(tmp2, CONST_BITS-PASS1_BITS); - - dataptr += DCTSIZE; /* advance pointer to next row */ - } - - /* Pass 2: process columns. - * We remove the PASS1_BITS scaling, but leave the results scaled up - * by an overall factor of 8. - * We must also scale the output by (8/7)**2 = 64/49, which we fold - * into the constant multipliers: - * cK now represents sqrt(2) * cos(K*pi/14) * 64/49. - */ - - dataptr = data; - for (ctr = 0; ctr < 7; ctr++) { - /* Even part */ - - tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*6]; - tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*5]; - tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*4]; - tmp3 = dataptr[DCTSIZE*3]; - - tmp10 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*6]; - tmp11 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*5]; - tmp12 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*4]; - - z1 = tmp0 + tmp2; - dataptr[DCTSIZE*0] = (DCTELEM) - DESCALE(MULTIPLY(z1 + tmp1 + tmp3, FIX(1.306122449)), /* 64/49 */ - CONST_BITS+PASS1_BITS); - tmp3 += tmp3; - z1 -= tmp3; - z1 -= tmp3; - z1 = MULTIPLY(z1, FIX(0.461784020)); /* (c2+c6-c4)/2 */ - z2 = MULTIPLY(tmp0 - tmp2, FIX(1.202428084)); /* (c2+c4-c6)/2 */ - z3 = MULTIPLY(tmp1 - tmp2, FIX(0.411026446)); /* c6 */ - dataptr[DCTSIZE*2] = (DCTELEM) DESCALE(z1 + z2 + z3, CONST_BITS+PASS1_BITS); - z1 -= z2; - z2 = MULTIPLY(tmp0 - tmp1, FIX(1.151670509)); /* c4 */ - dataptr[DCTSIZE*4] = (DCTELEM) - DESCALE(z2 + z3 - MULTIPLY(tmp1 - tmp3, FIX(0.923568041)), /* c2+c6-c4 */ - CONST_BITS+PASS1_BITS); - dataptr[DCTSIZE*6] = (DCTELEM) DESCALE(z1 + z2, CONST_BITS+PASS1_BITS); - - /* Odd part */ - - tmp1 = MULTIPLY(tmp10 + tmp11, FIX(1.221765677)); /* (c3+c1-c5)/2 */ - tmp2 = MULTIPLY(tmp10 - tmp11, FIX(0.222383464)); /* (c3+c5-c1)/2 */ - tmp0 = tmp1 - tmp2; - tmp1 += tmp2; - tmp2 = MULTIPLY(tmp11 + tmp12, - FIX(1.800824523)); /* -c1 */ - tmp1 += tmp2; - tmp3 = MULTIPLY(tmp10 + tmp12, FIX(0.801442310)); /* c5 */ - tmp0 += tmp3; - tmp2 += tmp3 + MULTIPLY(tmp12, FIX(2.443531355)); /* c3+c1-c5 */ - - dataptr[DCTSIZE*1] = (DCTELEM) DESCALE(tmp0, CONST_BITS+PASS1_BITS); - dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp1, CONST_BITS+PASS1_BITS); - dataptr[DCTSIZE*5] = (DCTELEM) DESCALE(tmp2, CONST_BITS+PASS1_BITS); - - dataptr++; /* advance pointer to next column */ - } -} - - -/* - * Perform the forward DCT on a 6x6 sample block. - */ - -GLOBAL(void) -jpeg_fdct_6x6 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) -{ - INT32 tmp0, tmp1, tmp2; - INT32 tmp10, tmp11, tmp12; - DCTELEM *dataptr; - JSAMPROW elemptr; - int ctr; - SHIFT_TEMPS - - /* Pre-zero output coefficient block. */ - MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); - - /* Pass 1: process rows. */ - /* Note results are scaled up by sqrt(8) compared to a true DCT; */ - /* furthermore, we scale the results by 2**PASS1_BITS. */ - /* cK represents sqrt(2) * cos(K*pi/12). */ - - dataptr = data; - for (ctr = 0; ctr < 6; ctr++) { - elemptr = sample_data[ctr] + start_col; - - /* Even part */ - - tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[5]); - tmp11 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[4]); - tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[3]); - - tmp10 = tmp0 + tmp2; - tmp12 = tmp0 - tmp2; - - tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[5]); - tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[4]); - tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[3]); - - /* Apply unsigned->signed conversion */ - dataptr[0] = (DCTELEM) - ((tmp10 + tmp11 - 6 * CENTERJSAMPLE) << PASS1_BITS); - dataptr[2] = (DCTELEM) - DESCALE(MULTIPLY(tmp12, FIX(1.224744871)), /* c2 */ - CONST_BITS-PASS1_BITS); - dataptr[4] = (DCTELEM) - DESCALE(MULTIPLY(tmp10 - tmp11 - tmp11, FIX(0.707106781)), /* c4 */ - CONST_BITS-PASS1_BITS); - - /* Odd part */ - - tmp10 = DESCALE(MULTIPLY(tmp0 + tmp2, FIX(0.366025404)), /* c5 */ - CONST_BITS-PASS1_BITS); - - dataptr[1] = (DCTELEM) (tmp10 + ((tmp0 + tmp1) << PASS1_BITS)); - dataptr[3] = (DCTELEM) ((tmp0 - tmp1 - tmp2) << PASS1_BITS); - dataptr[5] = (DCTELEM) (tmp10 + ((tmp2 - tmp1) << PASS1_BITS)); - - dataptr += DCTSIZE; /* advance pointer to next row */ - } - - /* Pass 2: process columns. - * We remove the PASS1_BITS scaling, but leave the results scaled up - * by an overall factor of 8. - * We must also scale the output by (8/6)**2 = 16/9, which we fold - * into the constant multipliers: - * cK now represents sqrt(2) * cos(K*pi/12) * 16/9. - */ - - dataptr = data; - for (ctr = 0; ctr < 6; ctr++) { - /* Even part */ - - tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*5]; - tmp11 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*4]; - tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*3]; - - tmp10 = tmp0 + tmp2; - tmp12 = tmp0 - tmp2; - - tmp0 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*5]; - tmp1 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*4]; - tmp2 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*3]; - - dataptr[DCTSIZE*0] = (DCTELEM) - DESCALE(MULTIPLY(tmp10 + tmp11, FIX(1.777777778)), /* 16/9 */ - CONST_BITS+PASS1_BITS); - dataptr[DCTSIZE*2] = (DCTELEM) - DESCALE(MULTIPLY(tmp12, FIX(2.177324216)), /* c2 */ - CONST_BITS+PASS1_BITS); - dataptr[DCTSIZE*4] = (DCTELEM) - DESCALE(MULTIPLY(tmp10 - tmp11 - tmp11, FIX(1.257078722)), /* c4 */ - CONST_BITS+PASS1_BITS); - - /* Odd part */ - - tmp10 = MULTIPLY(tmp0 + tmp2, FIX(0.650711829)); /* c5 */ - - dataptr[DCTSIZE*1] = (DCTELEM) - DESCALE(tmp10 + MULTIPLY(tmp0 + tmp1, FIX(1.777777778)), /* 16/9 */ - CONST_BITS+PASS1_BITS); - dataptr[DCTSIZE*3] = (DCTELEM) - DESCALE(MULTIPLY(tmp0 - tmp1 - tmp2, FIX(1.777777778)), /* 16/9 */ - CONST_BITS+PASS1_BITS); - dataptr[DCTSIZE*5] = (DCTELEM) - DESCALE(tmp10 + MULTIPLY(tmp2 - tmp1, FIX(1.777777778)), /* 16/9 */ - CONST_BITS+PASS1_BITS); - - dataptr++; /* advance pointer to next column */ - } -} - - -/* - * Perform the forward DCT on a 5x5 sample block. - */ - -GLOBAL(void) -jpeg_fdct_5x5 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) -{ - INT32 tmp0, tmp1, tmp2; - INT32 tmp10, tmp11; - DCTELEM *dataptr; - JSAMPROW elemptr; - int ctr; - SHIFT_TEMPS - - /* Pre-zero output coefficient block. */ - MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); - - /* Pass 1: process rows. */ - /* Note results are scaled up by sqrt(8) compared to a true DCT; */ - /* furthermore, we scale the results by 2**PASS1_BITS. */ - /* We scale the results further by 2 as part of output adaption */ - /* scaling for different DCT size. */ - /* cK represents sqrt(2) * cos(K*pi/10). */ - - dataptr = data; - for (ctr = 0; ctr < 5; ctr++) { - elemptr = sample_data[ctr] + start_col; - - /* Even part */ - - tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[4]); - tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[3]); - tmp2 = GETJSAMPLE(elemptr[2]); - - tmp10 = tmp0 + tmp1; - tmp11 = tmp0 - tmp1; - - tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[4]); - tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[3]); - - /* Apply unsigned->signed conversion */ - dataptr[0] = (DCTELEM) - ((tmp10 + tmp2 - 5 * CENTERJSAMPLE) << (PASS1_BITS+1)); - tmp11 = MULTIPLY(tmp11, FIX(0.790569415)); /* (c2+c4)/2 */ - tmp10 -= tmp2 << 2; - tmp10 = MULTIPLY(tmp10, FIX(0.353553391)); /* (c2-c4)/2 */ - dataptr[2] = (DCTELEM) DESCALE(tmp11 + tmp10, CONST_BITS-PASS1_BITS-1); - dataptr[4] = (DCTELEM) DESCALE(tmp11 - tmp10, CONST_BITS-PASS1_BITS-1); - - /* Odd part */ - - tmp10 = MULTIPLY(tmp0 + tmp1, FIX(0.831253876)); /* c3 */ - - dataptr[1] = (DCTELEM) - DESCALE(tmp10 + MULTIPLY(tmp0, FIX(0.513743148)), /* c1-c3 */ - CONST_BITS-PASS1_BITS-1); - dataptr[3] = (DCTELEM) - DESCALE(tmp10 - MULTIPLY(tmp1, FIX(2.176250899)), /* c1+c3 */ - CONST_BITS-PASS1_BITS-1); - - dataptr += DCTSIZE; /* advance pointer to next row */ - } - - /* Pass 2: process columns. - * We remove the PASS1_BITS scaling, but leave the results scaled up - * by an overall factor of 8. - * We must also scale the output by (8/5)**2 = 64/25, which we partially - * fold into the constant multipliers (other part was done in pass 1): - * cK now represents sqrt(2) * cos(K*pi/10) * 32/25. - */ - - dataptr = data; - for (ctr = 0; ctr < 5; ctr++) { - /* Even part */ - - tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*4]; - tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*3]; - tmp2 = dataptr[DCTSIZE*2]; - - tmp10 = tmp0 + tmp1; - tmp11 = tmp0 - tmp1; - - tmp0 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*4]; - tmp1 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*3]; - - dataptr[DCTSIZE*0] = (DCTELEM) - DESCALE(MULTIPLY(tmp10 + tmp2, FIX(1.28)), /* 32/25 */ - CONST_BITS+PASS1_BITS); - tmp11 = MULTIPLY(tmp11, FIX(1.011928851)); /* (c2+c4)/2 */ - tmp10 -= tmp2 << 2; - tmp10 = MULTIPLY(tmp10, FIX(0.452548340)); /* (c2-c4)/2 */ - dataptr[DCTSIZE*2] = (DCTELEM) DESCALE(tmp11 + tmp10, CONST_BITS+PASS1_BITS); - dataptr[DCTSIZE*4] = (DCTELEM) DESCALE(tmp11 - tmp10, CONST_BITS+PASS1_BITS); - - /* Odd part */ - - tmp10 = MULTIPLY(tmp0 + tmp1, FIX(1.064004961)); /* c3 */ - - dataptr[DCTSIZE*1] = (DCTELEM) - DESCALE(tmp10 + MULTIPLY(tmp0, FIX(0.657591230)), /* c1-c3 */ - CONST_BITS+PASS1_BITS); - dataptr[DCTSIZE*3] = (DCTELEM) - DESCALE(tmp10 - MULTIPLY(tmp1, FIX(2.785601151)), /* c1+c3 */ - CONST_BITS+PASS1_BITS); - - dataptr++; /* advance pointer to next column */ - } -} - - -/* - * Perform the forward DCT on a 4x4 sample block. - */ - -GLOBAL(void) -jpeg_fdct_4x4 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) -{ - INT32 tmp0, tmp1; - INT32 tmp10, tmp11; - DCTELEM *dataptr; - JSAMPROW elemptr; - int ctr; - SHIFT_TEMPS - - /* Pre-zero output coefficient block. */ - MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); - - /* Pass 1: process rows. */ - /* Note results are scaled up by sqrt(8) compared to a true DCT; */ - /* furthermore, we scale the results by 2**PASS1_BITS. */ - /* We must also scale the output by (8/4)**2 = 2**2, which we add here. */ - /* cK represents sqrt(2) * cos(K*pi/16) [refers to 8-point FDCT]. */ - - dataptr = data; - for (ctr = 0; ctr < 4; ctr++) { - elemptr = sample_data[ctr] + start_col; - - /* Even part */ - - tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[3]); - tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[2]); - - tmp10 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[3]); - tmp11 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[2]); - - /* Apply unsigned->signed conversion */ - dataptr[0] = (DCTELEM) - ((tmp0 + tmp1 - 4 * CENTERJSAMPLE) << (PASS1_BITS+2)); - dataptr[2] = (DCTELEM) ((tmp0 - tmp1) << (PASS1_BITS+2)); - - /* Odd part */ - - tmp0 = MULTIPLY(tmp10 + tmp11, FIX_0_541196100); /* c6 */ - /* Add fudge factor here for final descale. */ - tmp0 += ONE << (CONST_BITS-PASS1_BITS-3); - - dataptr[1] = (DCTELEM) - RIGHT_SHIFT(tmp0 + MULTIPLY(tmp10, FIX_0_765366865), /* c2-c6 */ - CONST_BITS-PASS1_BITS-2); - dataptr[3] = (DCTELEM) - RIGHT_SHIFT(tmp0 - MULTIPLY(tmp11, FIX_1_847759065), /* c2+c6 */ - CONST_BITS-PASS1_BITS-2); - - dataptr += DCTSIZE; /* advance pointer to next row */ - } - - /* Pass 2: process columns. - * We remove the PASS1_BITS scaling, but leave the results scaled up - * by an overall factor of 8. - */ - - dataptr = data; - for (ctr = 0; ctr < 4; ctr++) { - /* Even part */ - - /* Add fudge factor here for final descale. */ - tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*3] + (ONE << (PASS1_BITS-1)); - tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*2]; - - tmp10 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*3]; - tmp11 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*2]; - - dataptr[DCTSIZE*0] = (DCTELEM) RIGHT_SHIFT(tmp0 + tmp1, PASS1_BITS); - dataptr[DCTSIZE*2] = (DCTELEM) RIGHT_SHIFT(tmp0 - tmp1, PASS1_BITS); - - /* Odd part */ - - tmp0 = MULTIPLY(tmp10 + tmp11, FIX_0_541196100); /* c6 */ - /* Add fudge factor here for final descale. */ - tmp0 += ONE << (CONST_BITS+PASS1_BITS-1); - - dataptr[DCTSIZE*1] = (DCTELEM) - RIGHT_SHIFT(tmp0 + MULTIPLY(tmp10, FIX_0_765366865), /* c2-c6 */ - CONST_BITS+PASS1_BITS); - dataptr[DCTSIZE*3] = (DCTELEM) - RIGHT_SHIFT(tmp0 - MULTIPLY(tmp11, FIX_1_847759065), /* c2+c6 */ - CONST_BITS+PASS1_BITS); - - dataptr++; /* advance pointer to next column */ - } -} - - -/* - * Perform the forward DCT on a 3x3 sample block. - */ - -GLOBAL(void) -jpeg_fdct_3x3 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) -{ - INT32 tmp0, tmp1, tmp2; - DCTELEM *dataptr; - JSAMPROW elemptr; - int ctr; - SHIFT_TEMPS - - /* Pre-zero output coefficient block. */ - MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); - - /* Pass 1: process rows. */ - /* Note results are scaled up by sqrt(8) compared to a true DCT; */ - /* furthermore, we scale the results by 2**PASS1_BITS. */ - /* We scale the results further by 2**2 as part of output adaption */ - /* scaling for different DCT size. */ - /* cK represents sqrt(2) * cos(K*pi/6). */ - - dataptr = data; - for (ctr = 0; ctr < 3; ctr++) { - elemptr = sample_data[ctr] + start_col; - - /* Even part */ - - tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[2]); - tmp1 = GETJSAMPLE(elemptr[1]); - - tmp2 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[2]); - - /* Apply unsigned->signed conversion */ - dataptr[0] = (DCTELEM) - ((tmp0 + tmp1 - 3 * CENTERJSAMPLE) << (PASS1_BITS+2)); - dataptr[2] = (DCTELEM) - DESCALE(MULTIPLY(tmp0 - tmp1 - tmp1, FIX(0.707106781)), /* c2 */ - CONST_BITS-PASS1_BITS-2); - - /* Odd part */ - - dataptr[1] = (DCTELEM) - DESCALE(MULTIPLY(tmp2, FIX(1.224744871)), /* c1 */ - CONST_BITS-PASS1_BITS-2); - - dataptr += DCTSIZE; /* advance pointer to next row */ - } - - /* Pass 2: process columns. - * We remove the PASS1_BITS scaling, but leave the results scaled up - * by an overall factor of 8. - * We must also scale the output by (8/3)**2 = 64/9, which we partially - * fold into the constant multipliers (other part was done in pass 1): - * cK now represents sqrt(2) * cos(K*pi/6) * 16/9. - */ - - dataptr = data; - for (ctr = 0; ctr < 3; ctr++) { - /* Even part */ - - tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*2]; - tmp1 = dataptr[DCTSIZE*1]; - - tmp2 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*2]; - - dataptr[DCTSIZE*0] = (DCTELEM) - DESCALE(MULTIPLY(tmp0 + tmp1, FIX(1.777777778)), /* 16/9 */ - CONST_BITS+PASS1_BITS); - dataptr[DCTSIZE*2] = (DCTELEM) - DESCALE(MULTIPLY(tmp0 - tmp1 - tmp1, FIX(1.257078722)), /* c2 */ - CONST_BITS+PASS1_BITS); - - /* Odd part */ - - dataptr[DCTSIZE*1] = (DCTELEM) - DESCALE(MULTIPLY(tmp2, FIX(2.177324216)), /* c1 */ - CONST_BITS+PASS1_BITS); - - dataptr++; /* advance pointer to next column */ - } -} - - -/* - * Perform the forward DCT on a 2x2 sample block. - */ - -GLOBAL(void) -jpeg_fdct_2x2 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) -{ - INT32 tmp0, tmp1, tmp2, tmp3; - JSAMPROW elemptr; - - /* Pre-zero output coefficient block. */ - MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); - - /* Pass 1: process rows. */ - /* Note results are scaled up by sqrt(8) compared to a true DCT. */ - - /* Row 0 */ - elemptr = sample_data[0] + start_col; - - tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[1]); - tmp1 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[1]); - - /* Row 1 */ - elemptr = sample_data[1] + start_col; - - tmp2 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[1]); - tmp3 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[1]); - - /* Pass 2: process columns. - * We leave the results scaled up by an overall factor of 8. - * We must also scale the output by (8/2)**2 = 2**4. - */ - - /* Column 0 */ - /* Apply unsigned->signed conversion */ - data[DCTSIZE*0] = (DCTELEM) ((tmp0 + tmp2 - 4 * CENTERJSAMPLE) << 4); - data[DCTSIZE*1] = (DCTELEM) ((tmp0 - tmp2) << 4); - - /* Column 1 */ - data[DCTSIZE*0+1] = (DCTELEM) ((tmp1 + tmp3) << 4); - data[DCTSIZE*1+1] = (DCTELEM) ((tmp1 - tmp3) << 4); -} - - -/* - * Perform the forward DCT on a 1x1 sample block. - */ - -GLOBAL(void) -jpeg_fdct_1x1 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) -{ - /* Pre-zero output coefficient block. */ - MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); - - /* We leave the result scaled up by an overall factor of 8. */ - /* We must also scale the output by (8/1)**2 = 2**6. */ - /* Apply unsigned->signed conversion */ - data[0] = (DCTELEM) - ((GETJSAMPLE(sample_data[0][start_col]) - CENTERJSAMPLE) << 6); -} - - -/* - * Perform the forward DCT on a 9x9 sample block. - */ - -GLOBAL(void) -jpeg_fdct_9x9 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) -{ - INT32 tmp0, tmp1, tmp2, tmp3, tmp4; - INT32 tmp10, tmp11, tmp12, tmp13; - INT32 z1, z2; - DCTELEM workspace[8]; - DCTELEM *dataptr; - DCTELEM *wsptr; - JSAMPROW elemptr; - int ctr; - SHIFT_TEMPS - - /* Pass 1: process rows. */ - /* Note results are scaled up by sqrt(8) compared to a true DCT; */ - /* we scale the results further by 2 as part of output adaption */ - /* scaling for different DCT size. */ - /* cK represents sqrt(2) * cos(K*pi/18). */ - - dataptr = data; - ctr = 0; - for (;;) { - elemptr = sample_data[ctr] + start_col; - - /* Even part */ - - tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[8]); - tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[7]); - tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[6]); - tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[5]); - tmp4 = GETJSAMPLE(elemptr[4]); - - tmp10 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[8]); - tmp11 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[7]); - tmp12 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[6]); - tmp13 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[5]); - - z1 = tmp0 + tmp2 + tmp3; - z2 = tmp1 + tmp4; - /* Apply unsigned->signed conversion */ - dataptr[0] = (DCTELEM) ((z1 + z2 - 9 * CENTERJSAMPLE) << 1); - dataptr[6] = (DCTELEM) - DESCALE(MULTIPLY(z1 - z2 - z2, FIX(0.707106781)), /* c6 */ - CONST_BITS-1); - z1 = MULTIPLY(tmp0 - tmp2, FIX(1.328926049)); /* c2 */ - z2 = MULTIPLY(tmp1 - tmp4 - tmp4, FIX(0.707106781)); /* c6 */ - dataptr[2] = (DCTELEM) - DESCALE(MULTIPLY(tmp2 - tmp3, FIX(1.083350441)) /* c4 */ - + z1 + z2, CONST_BITS-1); - dataptr[4] = (DCTELEM) - DESCALE(MULTIPLY(tmp3 - tmp0, FIX(0.245575608)) /* c8 */ - + z1 - z2, CONST_BITS-1); - - /* Odd part */ - - dataptr[3] = (DCTELEM) - DESCALE(MULTIPLY(tmp10 - tmp12 - tmp13, FIX(1.224744871)), /* c3 */ - CONST_BITS-1); - - tmp11 = MULTIPLY(tmp11, FIX(1.224744871)); /* c3 */ - tmp0 = MULTIPLY(tmp10 + tmp12, FIX(0.909038955)); /* c5 */ - tmp1 = MULTIPLY(tmp10 + tmp13, FIX(0.483689525)); /* c7 */ - - dataptr[1] = (DCTELEM) DESCALE(tmp11 + tmp0 + tmp1, CONST_BITS-1); - - tmp2 = MULTIPLY(tmp12 - tmp13, FIX(1.392728481)); /* c1 */ - - dataptr[5] = (DCTELEM) DESCALE(tmp0 - tmp11 - tmp2, CONST_BITS-1); - dataptr[7] = (DCTELEM) DESCALE(tmp1 - tmp11 + tmp2, CONST_BITS-1); - - ctr++; - - if (ctr != DCTSIZE) { - if (ctr == 9) - break; /* Done. */ - dataptr += DCTSIZE; /* advance pointer to next row */ - } else - dataptr = workspace; /* switch pointer to extended workspace */ - } - - /* Pass 2: process columns. - * We leave the results scaled up by an overall factor of 8. - * We must also scale the output by (8/9)**2 = 64/81, which we partially - * fold into the constant multipliers and final/initial shifting: - * cK now represents sqrt(2) * cos(K*pi/18) * 128/81. - */ - - dataptr = data; - wsptr = workspace; - for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { - /* Even part */ - - tmp0 = dataptr[DCTSIZE*0] + wsptr[DCTSIZE*0]; - tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*7]; - tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*6]; - tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*5]; - tmp4 = dataptr[DCTSIZE*4]; - - tmp10 = dataptr[DCTSIZE*0] - wsptr[DCTSIZE*0]; - tmp11 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*7]; - tmp12 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*6]; - tmp13 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*5]; - - z1 = tmp0 + tmp2 + tmp3; - z2 = tmp1 + tmp4; - dataptr[DCTSIZE*0] = (DCTELEM) - DESCALE(MULTIPLY(z1 + z2, FIX(1.580246914)), /* 128/81 */ - CONST_BITS+2); - dataptr[DCTSIZE*6] = (DCTELEM) - DESCALE(MULTIPLY(z1 - z2 - z2, FIX(1.117403309)), /* c6 */ - CONST_BITS+2); - z1 = MULTIPLY(tmp0 - tmp2, FIX(2.100031287)); /* c2 */ - z2 = MULTIPLY(tmp1 - tmp4 - tmp4, FIX(1.117403309)); /* c6 */ - dataptr[DCTSIZE*2] = (DCTELEM) - DESCALE(MULTIPLY(tmp2 - tmp3, FIX(1.711961190)) /* c4 */ - + z1 + z2, CONST_BITS+2); - dataptr[DCTSIZE*4] = (DCTELEM) - DESCALE(MULTIPLY(tmp3 - tmp0, FIX(0.388070096)) /* c8 */ - + z1 - z2, CONST_BITS+2); - - /* Odd part */ - - dataptr[DCTSIZE*3] = (DCTELEM) - DESCALE(MULTIPLY(tmp10 - tmp12 - tmp13, FIX(1.935399303)), /* c3 */ - CONST_BITS+2); - - tmp11 = MULTIPLY(tmp11, FIX(1.935399303)); /* c3 */ - tmp0 = MULTIPLY(tmp10 + tmp12, FIX(1.436506004)); /* c5 */ - tmp1 = MULTIPLY(tmp10 + tmp13, FIX(0.764348879)); /* c7 */ - - dataptr[DCTSIZE*1] = (DCTELEM) - DESCALE(tmp11 + tmp0 + tmp1, CONST_BITS+2); - - tmp2 = MULTIPLY(tmp12 - tmp13, FIX(2.200854883)); /* c1 */ - - dataptr[DCTSIZE*5] = (DCTELEM) - DESCALE(tmp0 - tmp11 - tmp2, CONST_BITS+2); - dataptr[DCTSIZE*7] = (DCTELEM) - DESCALE(tmp1 - tmp11 + tmp2, CONST_BITS+2); - - dataptr++; /* advance pointer to next column */ - wsptr++; /* advance pointer to next column */ - } -} - - -/* - * Perform the forward DCT on a 10x10 sample block. - */ - -GLOBAL(void) -jpeg_fdct_10x10 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) -{ - INT32 tmp0, tmp1, tmp2, tmp3, tmp4; - INT32 tmp10, tmp11, tmp12, tmp13, tmp14; - DCTELEM workspace[8*2]; - DCTELEM *dataptr; - DCTELEM *wsptr; - JSAMPROW elemptr; - int ctr; - SHIFT_TEMPS - - /* Pass 1: process rows. */ - /* Note results are scaled up by sqrt(8) compared to a true DCT; */ - /* we scale the results further by 2 as part of output adaption */ - /* scaling for different DCT size. */ - /* cK represents sqrt(2) * cos(K*pi/20). */ - - dataptr = data; - ctr = 0; - for (;;) { - elemptr = sample_data[ctr] + start_col; - - /* Even part */ - - tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[9]); - tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[8]); - tmp12 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[7]); - tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[6]); - tmp4 = GETJSAMPLE(elemptr[4]) + GETJSAMPLE(elemptr[5]); - - tmp10 = tmp0 + tmp4; - tmp13 = tmp0 - tmp4; - tmp11 = tmp1 + tmp3; - tmp14 = tmp1 - tmp3; - - tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[9]); - tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[8]); - tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[7]); - tmp3 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[6]); - tmp4 = GETJSAMPLE(elemptr[4]) - GETJSAMPLE(elemptr[5]); - - /* Apply unsigned->signed conversion */ - dataptr[0] = (DCTELEM) - ((tmp10 + tmp11 + tmp12 - 10 * CENTERJSAMPLE) << 1); - tmp12 += tmp12; - dataptr[4] = (DCTELEM) - DESCALE(MULTIPLY(tmp10 - tmp12, FIX(1.144122806)) - /* c4 */ - MULTIPLY(tmp11 - tmp12, FIX(0.437016024)), /* c8 */ - CONST_BITS-1); - tmp10 = MULTIPLY(tmp13 + tmp14, FIX(0.831253876)); /* c6 */ - dataptr[2] = (DCTELEM) - DESCALE(tmp10 + MULTIPLY(tmp13, FIX(0.513743148)), /* c2-c6 */ - CONST_BITS-1); - dataptr[6] = (DCTELEM) - DESCALE(tmp10 - MULTIPLY(tmp14, FIX(2.176250899)), /* c2+c6 */ - CONST_BITS-1); - - /* Odd part */ - - tmp10 = tmp0 + tmp4; - tmp11 = tmp1 - tmp3; - dataptr[5] = (DCTELEM) ((tmp10 - tmp11 - tmp2) << 1); - tmp2 <<= CONST_BITS; - dataptr[1] = (DCTELEM) - DESCALE(MULTIPLY(tmp0, FIX(1.396802247)) + /* c1 */ - MULTIPLY(tmp1, FIX(1.260073511)) + tmp2 + /* c3 */ - MULTIPLY(tmp3, FIX(0.642039522)) + /* c7 */ - MULTIPLY(tmp4, FIX(0.221231742)), /* c9 */ - CONST_BITS-1); - tmp12 = MULTIPLY(tmp0 - tmp4, FIX(0.951056516)) - /* (c3+c7)/2 */ - MULTIPLY(tmp1 + tmp3, FIX(0.587785252)); /* (c1-c9)/2 */ - tmp13 = MULTIPLY(tmp10 + tmp11, FIX(0.309016994)) + /* (c3-c7)/2 */ - (tmp11 << (CONST_BITS - 1)) - tmp2; - dataptr[3] = (DCTELEM) DESCALE(tmp12 + tmp13, CONST_BITS-1); - dataptr[7] = (DCTELEM) DESCALE(tmp12 - tmp13, CONST_BITS-1); - - ctr++; - - if (ctr != DCTSIZE) { - if (ctr == 10) - break; /* Done. */ - dataptr += DCTSIZE; /* advance pointer to next row */ - } else - dataptr = workspace; /* switch pointer to extended workspace */ - } - - /* Pass 2: process columns. - * We leave the results scaled up by an overall factor of 8. - * We must also scale the output by (8/10)**2 = 16/25, which we partially - * fold into the constant multipliers and final/initial shifting: - * cK now represents sqrt(2) * cos(K*pi/20) * 32/25. - */ - - dataptr = data; - wsptr = workspace; - for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { - /* Even part */ - - tmp0 = dataptr[DCTSIZE*0] + wsptr[DCTSIZE*1]; - tmp1 = dataptr[DCTSIZE*1] + wsptr[DCTSIZE*0]; - tmp12 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*7]; - tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*6]; - tmp4 = dataptr[DCTSIZE*4] + dataptr[DCTSIZE*5]; - - tmp10 = tmp0 + tmp4; - tmp13 = tmp0 - tmp4; - tmp11 = tmp1 + tmp3; - tmp14 = tmp1 - tmp3; - - tmp0 = dataptr[DCTSIZE*0] - wsptr[DCTSIZE*1]; - tmp1 = dataptr[DCTSIZE*1] - wsptr[DCTSIZE*0]; - tmp2 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*7]; - tmp3 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*6]; - tmp4 = dataptr[DCTSIZE*4] - dataptr[DCTSIZE*5]; - - dataptr[DCTSIZE*0] = (DCTELEM) - DESCALE(MULTIPLY(tmp10 + tmp11 + tmp12, FIX(1.28)), /* 32/25 */ - CONST_BITS+2); - tmp12 += tmp12; - dataptr[DCTSIZE*4] = (DCTELEM) - DESCALE(MULTIPLY(tmp10 - tmp12, FIX(1.464477191)) - /* c4 */ - MULTIPLY(tmp11 - tmp12, FIX(0.559380511)), /* c8 */ - CONST_BITS+2); - tmp10 = MULTIPLY(tmp13 + tmp14, FIX(1.064004961)); /* c6 */ - dataptr[DCTSIZE*2] = (DCTELEM) - DESCALE(tmp10 + MULTIPLY(tmp13, FIX(0.657591230)), /* c2-c6 */ - CONST_BITS+2); - dataptr[DCTSIZE*6] = (DCTELEM) - DESCALE(tmp10 - MULTIPLY(tmp14, FIX(2.785601151)), /* c2+c6 */ - CONST_BITS+2); - - /* Odd part */ - - tmp10 = tmp0 + tmp4; - tmp11 = tmp1 - tmp3; - dataptr[DCTSIZE*5] = (DCTELEM) - DESCALE(MULTIPLY(tmp10 - tmp11 - tmp2, FIX(1.28)), /* 32/25 */ - CONST_BITS+2); - tmp2 = MULTIPLY(tmp2, FIX(1.28)); /* 32/25 */ - dataptr[DCTSIZE*1] = (DCTELEM) - DESCALE(MULTIPLY(tmp0, FIX(1.787906876)) + /* c1 */ - MULTIPLY(tmp1, FIX(1.612894094)) + tmp2 + /* c3 */ - MULTIPLY(tmp3, FIX(0.821810588)) + /* c7 */ - MULTIPLY(tmp4, FIX(0.283176630)), /* c9 */ - CONST_BITS+2); - tmp12 = MULTIPLY(tmp0 - tmp4, FIX(1.217352341)) - /* (c3+c7)/2 */ - MULTIPLY(tmp1 + tmp3, FIX(0.752365123)); /* (c1-c9)/2 */ - tmp13 = MULTIPLY(tmp10 + tmp11, FIX(0.395541753)) + /* (c3-c7)/2 */ - MULTIPLY(tmp11, FIX(0.64)) - tmp2; /* 16/25 */ - dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp12 + tmp13, CONST_BITS+2); - dataptr[DCTSIZE*7] = (DCTELEM) DESCALE(tmp12 - tmp13, CONST_BITS+2); - - dataptr++; /* advance pointer to next column */ - wsptr++; /* advance pointer to next column */ - } -} - - -/* - * Perform the forward DCT on an 11x11 sample block. - */ - -GLOBAL(void) -jpeg_fdct_11x11 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) -{ - INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5; - INT32 tmp10, tmp11, tmp12, tmp13, tmp14; - INT32 z1, z2, z3; - DCTELEM workspace[8*3]; - DCTELEM *dataptr; - DCTELEM *wsptr; - JSAMPROW elemptr; - int ctr; - SHIFT_TEMPS - - /* Pass 1: process rows. */ - /* Note results are scaled up by sqrt(8) compared to a true DCT; */ - /* we scale the results further by 2 as part of output adaption */ - /* scaling for different DCT size. */ - /* cK represents sqrt(2) * cos(K*pi/22). */ - - dataptr = data; - ctr = 0; - for (;;) { - elemptr = sample_data[ctr] + start_col; - - /* Even part */ - - tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[10]); - tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[9]); - tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[8]); - tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[7]); - tmp4 = GETJSAMPLE(elemptr[4]) + GETJSAMPLE(elemptr[6]); - tmp5 = GETJSAMPLE(elemptr[5]); - - tmp10 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[10]); - tmp11 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[9]); - tmp12 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[8]); - tmp13 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[7]); - tmp14 = GETJSAMPLE(elemptr[4]) - GETJSAMPLE(elemptr[6]); - - /* Apply unsigned->signed conversion */ - dataptr[0] = (DCTELEM) - ((tmp0 + tmp1 + tmp2 + tmp3 + tmp4 + tmp5 - 11 * CENTERJSAMPLE) << 1); - tmp5 += tmp5; - tmp0 -= tmp5; - tmp1 -= tmp5; - tmp2 -= tmp5; - tmp3 -= tmp5; - tmp4 -= tmp5; - z1 = MULTIPLY(tmp0 + tmp3, FIX(1.356927976)) + /* c2 */ - MULTIPLY(tmp2 + tmp4, FIX(0.201263574)); /* c10 */ - z2 = MULTIPLY(tmp1 - tmp3, FIX(0.926112931)); /* c6 */ - z3 = MULTIPLY(tmp0 - tmp1, FIX(1.189712156)); /* c4 */ - dataptr[2] = (DCTELEM) - DESCALE(z1 + z2 - MULTIPLY(tmp3, FIX(1.018300590)) /* c2+c8-c6 */ - - MULTIPLY(tmp4, FIX(1.390975730)), /* c4+c10 */ - CONST_BITS-1); - dataptr[4] = (DCTELEM) - DESCALE(z2 + z3 + MULTIPLY(tmp1, FIX(0.062335650)) /* c4-c6-c10 */ - - MULTIPLY(tmp2, FIX(1.356927976)) /* c2 */ - + MULTIPLY(tmp4, FIX(0.587485545)), /* c8 */ - CONST_BITS-1); - dataptr[6] = (DCTELEM) - DESCALE(z1 + z3 - MULTIPLY(tmp0, FIX(1.620527200)) /* c2+c4-c6 */ - - MULTIPLY(tmp2, FIX(0.788749120)), /* c8+c10 */ - CONST_BITS-1); - - /* Odd part */ - - tmp1 = MULTIPLY(tmp10 + tmp11, FIX(1.286413905)); /* c3 */ - tmp2 = MULTIPLY(tmp10 + tmp12, FIX(1.068791298)); /* c5 */ - tmp3 = MULTIPLY(tmp10 + tmp13, FIX(0.764581576)); /* c7 */ - tmp0 = tmp1 + tmp2 + tmp3 - MULTIPLY(tmp10, FIX(1.719967871)) /* c7+c5+c3-c1 */ - + MULTIPLY(tmp14, FIX(0.398430003)); /* c9 */ - tmp4 = MULTIPLY(tmp11 + tmp12, - FIX(0.764581576)); /* -c7 */ - tmp5 = MULTIPLY(tmp11 + tmp13, - FIX(1.399818907)); /* -c1 */ - tmp1 += tmp4 + tmp5 + MULTIPLY(tmp11, FIX(1.276416582)) /* c9+c7+c1-c3 */ - - MULTIPLY(tmp14, FIX(1.068791298)); /* c5 */ - tmp10 = MULTIPLY(tmp12 + tmp13, FIX(0.398430003)); /* c9 */ - tmp2 += tmp4 + tmp10 - MULTIPLY(tmp12, FIX(1.989053629)) /* c9+c5+c3-c7 */ - + MULTIPLY(tmp14, FIX(1.399818907)); /* c1 */ - tmp3 += tmp5 + tmp10 + MULTIPLY(tmp13, FIX(1.305598626)) /* c1+c5-c9-c7 */ - - MULTIPLY(tmp14, FIX(1.286413905)); /* c3 */ - - dataptr[1] = (DCTELEM) DESCALE(tmp0, CONST_BITS-1); - dataptr[3] = (DCTELEM) DESCALE(tmp1, CONST_BITS-1); - dataptr[5] = (DCTELEM) DESCALE(tmp2, CONST_BITS-1); - dataptr[7] = (DCTELEM) DESCALE(tmp3, CONST_BITS-1); - - ctr++; - - if (ctr != DCTSIZE) { - if (ctr == 11) - break; /* Done. */ - dataptr += DCTSIZE; /* advance pointer to next row */ - } else - dataptr = workspace; /* switch pointer to extended workspace */ - } - - /* Pass 2: process columns. - * We leave the results scaled up by an overall factor of 8. - * We must also scale the output by (8/11)**2 = 64/121, which we partially - * fold into the constant multipliers and final/initial shifting: - * cK now represents sqrt(2) * cos(K*pi/22) * 128/121. - */ - - dataptr = data; - wsptr = workspace; - for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { - /* Even part */ - - tmp0 = dataptr[DCTSIZE*0] + wsptr[DCTSIZE*2]; - tmp1 = dataptr[DCTSIZE*1] + wsptr[DCTSIZE*1]; - tmp2 = dataptr[DCTSIZE*2] + wsptr[DCTSIZE*0]; - tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*7]; - tmp4 = dataptr[DCTSIZE*4] + dataptr[DCTSIZE*6]; - tmp5 = dataptr[DCTSIZE*5]; - - tmp10 = dataptr[DCTSIZE*0] - wsptr[DCTSIZE*2]; - tmp11 = dataptr[DCTSIZE*1] - wsptr[DCTSIZE*1]; - tmp12 = dataptr[DCTSIZE*2] - wsptr[DCTSIZE*0]; - tmp13 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*7]; - tmp14 = dataptr[DCTSIZE*4] - dataptr[DCTSIZE*6]; - - dataptr[DCTSIZE*0] = (DCTELEM) - DESCALE(MULTIPLY(tmp0 + tmp1 + tmp2 + tmp3 + tmp4 + tmp5, - FIX(1.057851240)), /* 128/121 */ - CONST_BITS+2); - tmp5 += tmp5; - tmp0 -= tmp5; - tmp1 -= tmp5; - tmp2 -= tmp5; - tmp3 -= tmp5; - tmp4 -= tmp5; - z1 = MULTIPLY(tmp0 + tmp3, FIX(1.435427942)) + /* c2 */ - MULTIPLY(tmp2 + tmp4, FIX(0.212906922)); /* c10 */ - z2 = MULTIPLY(tmp1 - tmp3, FIX(0.979689713)); /* c6 */ - z3 = MULTIPLY(tmp0 - tmp1, FIX(1.258538479)); /* c4 */ - dataptr[DCTSIZE*2] = (DCTELEM) - DESCALE(z1 + z2 - MULTIPLY(tmp3, FIX(1.077210542)) /* c2+c8-c6 */ - - MULTIPLY(tmp4, FIX(1.471445400)), /* c4+c10 */ - CONST_BITS+2); - dataptr[DCTSIZE*4] = (DCTELEM) - DESCALE(z2 + z3 + MULTIPLY(tmp1, FIX(0.065941844)) /* c4-c6-c10 */ - - MULTIPLY(tmp2, FIX(1.435427942)) /* c2 */ - + MULTIPLY(tmp4, FIX(0.621472312)), /* c8 */ - CONST_BITS+2); - dataptr[DCTSIZE*6] = (DCTELEM) - DESCALE(z1 + z3 - MULTIPLY(tmp0, FIX(1.714276708)) /* c2+c4-c6 */ - - MULTIPLY(tmp2, FIX(0.834379234)), /* c8+c10 */ - CONST_BITS+2); - - /* Odd part */ - - tmp1 = MULTIPLY(tmp10 + tmp11, FIX(1.360834544)); /* c3 */ - tmp2 = MULTIPLY(tmp10 + tmp12, FIX(1.130622199)); /* c5 */ - tmp3 = MULTIPLY(tmp10 + tmp13, FIX(0.808813568)); /* c7 */ - tmp0 = tmp1 + tmp2 + tmp3 - MULTIPLY(tmp10, FIX(1.819470145)) /* c7+c5+c3-c1 */ - + MULTIPLY(tmp14, FIX(0.421479672)); /* c9 */ - tmp4 = MULTIPLY(tmp11 + tmp12, - FIX(0.808813568)); /* -c7 */ - tmp5 = MULTIPLY(tmp11 + tmp13, - FIX(1.480800167)); /* -c1 */ - tmp1 += tmp4 + tmp5 + MULTIPLY(tmp11, FIX(1.350258864)) /* c9+c7+c1-c3 */ - - MULTIPLY(tmp14, FIX(1.130622199)); /* c5 */ - tmp10 = MULTIPLY(tmp12 + tmp13, FIX(0.421479672)); /* c9 */ - tmp2 += tmp4 + tmp10 - MULTIPLY(tmp12, FIX(2.104122847)) /* c9+c5+c3-c7 */ - + MULTIPLY(tmp14, FIX(1.480800167)); /* c1 */ - tmp3 += tmp5 + tmp10 + MULTIPLY(tmp13, FIX(1.381129125)) /* c1+c5-c9-c7 */ - - MULTIPLY(tmp14, FIX(1.360834544)); /* c3 */ - - dataptr[DCTSIZE*1] = (DCTELEM) DESCALE(tmp0, CONST_BITS+2); - dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp1, CONST_BITS+2); - dataptr[DCTSIZE*5] = (DCTELEM) DESCALE(tmp2, CONST_BITS+2); - dataptr[DCTSIZE*7] = (DCTELEM) DESCALE(tmp3, CONST_BITS+2); - - dataptr++; /* advance pointer to next column */ - wsptr++; /* advance pointer to next column */ - } -} - - -/* - * Perform the forward DCT on a 12x12 sample block. - */ - -GLOBAL(void) -jpeg_fdct_12x12 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) -{ - INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5; - INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15; - DCTELEM workspace[8*4]; - DCTELEM *dataptr; - DCTELEM *wsptr; - JSAMPROW elemptr; - int ctr; - SHIFT_TEMPS - - /* Pass 1: process rows. */ - /* Note results are scaled up by sqrt(8) compared to a true DCT. */ - /* cK represents sqrt(2) * cos(K*pi/24). */ - - dataptr = data; - ctr = 0; - for (;;) { - elemptr = sample_data[ctr] + start_col; - - /* Even part */ - - tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[11]); - tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[10]); - tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[9]); - tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[8]); - tmp4 = GETJSAMPLE(elemptr[4]) + GETJSAMPLE(elemptr[7]); - tmp5 = GETJSAMPLE(elemptr[5]) + GETJSAMPLE(elemptr[6]); - - tmp10 = tmp0 + tmp5; - tmp13 = tmp0 - tmp5; - tmp11 = tmp1 + tmp4; - tmp14 = tmp1 - tmp4; - tmp12 = tmp2 + tmp3; - tmp15 = tmp2 - tmp3; - - tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[11]); - tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[10]); - tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[9]); - tmp3 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[8]); - tmp4 = GETJSAMPLE(elemptr[4]) - GETJSAMPLE(elemptr[7]); - tmp5 = GETJSAMPLE(elemptr[5]) - GETJSAMPLE(elemptr[6]); - - /* Apply unsigned->signed conversion */ - dataptr[0] = (DCTELEM) (tmp10 + tmp11 + tmp12 - 12 * CENTERJSAMPLE); - dataptr[6] = (DCTELEM) (tmp13 - tmp14 - tmp15); - dataptr[4] = (DCTELEM) - DESCALE(MULTIPLY(tmp10 - tmp12, FIX(1.224744871)), /* c4 */ - CONST_BITS); - dataptr[2] = (DCTELEM) - DESCALE(tmp14 - tmp15 + MULTIPLY(tmp13 + tmp15, FIX(1.366025404)), /* c2 */ - CONST_BITS); - - /* Odd part */ - - tmp10 = MULTIPLY(tmp1 + tmp4, FIX_0_541196100); /* c9 */ - tmp14 = tmp10 + MULTIPLY(tmp1, FIX_0_765366865); /* c3-c9 */ - tmp15 = tmp10 - MULTIPLY(tmp4, FIX_1_847759065); /* c3+c9 */ - tmp12 = MULTIPLY(tmp0 + tmp2, FIX(1.121971054)); /* c5 */ - tmp13 = MULTIPLY(tmp0 + tmp3, FIX(0.860918669)); /* c7 */ - tmp10 = tmp12 + tmp13 + tmp14 - MULTIPLY(tmp0, FIX(0.580774953)) /* c5+c7-c1 */ - + MULTIPLY(tmp5, FIX(0.184591911)); /* c11 */ - tmp11 = MULTIPLY(tmp2 + tmp3, - FIX(0.184591911)); /* -c11 */ - tmp12 += tmp11 - tmp15 - MULTIPLY(tmp2, FIX(2.339493912)) /* c1+c5-c11 */ - + MULTIPLY(tmp5, FIX(0.860918669)); /* c7 */ - tmp13 += tmp11 - tmp14 + MULTIPLY(tmp3, FIX(0.725788011)) /* c1+c11-c7 */ - - MULTIPLY(tmp5, FIX(1.121971054)); /* c5 */ - tmp11 = tmp15 + MULTIPLY(tmp0 - tmp3, FIX(1.306562965)) /* c3 */ - - MULTIPLY(tmp2 + tmp5, FIX_0_541196100); /* c9 */ - - dataptr[1] = (DCTELEM) DESCALE(tmp10, CONST_BITS); - dataptr[3] = (DCTELEM) DESCALE(tmp11, CONST_BITS); - dataptr[5] = (DCTELEM) DESCALE(tmp12, CONST_BITS); - dataptr[7] = (DCTELEM) DESCALE(tmp13, CONST_BITS); - - ctr++; - - if (ctr != DCTSIZE) { - if (ctr == 12) - break; /* Done. */ - dataptr += DCTSIZE; /* advance pointer to next row */ - } else - dataptr = workspace; /* switch pointer to extended workspace */ - } - - /* Pass 2: process columns. - * We leave the results scaled up by an overall factor of 8. - * We must also scale the output by (8/12)**2 = 4/9, which we partially - * fold into the constant multipliers and final shifting: - * cK now represents sqrt(2) * cos(K*pi/24) * 8/9. - */ - - dataptr = data; - wsptr = workspace; - for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { - /* Even part */ - - tmp0 = dataptr[DCTSIZE*0] + wsptr[DCTSIZE*3]; - tmp1 = dataptr[DCTSIZE*1] + wsptr[DCTSIZE*2]; - tmp2 = dataptr[DCTSIZE*2] + wsptr[DCTSIZE*1]; - tmp3 = dataptr[DCTSIZE*3] + wsptr[DCTSIZE*0]; - tmp4 = dataptr[DCTSIZE*4] + dataptr[DCTSIZE*7]; - tmp5 = dataptr[DCTSIZE*5] + dataptr[DCTSIZE*6]; - - tmp10 = tmp0 + tmp5; - tmp13 = tmp0 - tmp5; - tmp11 = tmp1 + tmp4; - tmp14 = tmp1 - tmp4; - tmp12 = tmp2 + tmp3; - tmp15 = tmp2 - tmp3; - - tmp0 = dataptr[DCTSIZE*0] - wsptr[DCTSIZE*3]; - tmp1 = dataptr[DCTSIZE*1] - wsptr[DCTSIZE*2]; - tmp2 = dataptr[DCTSIZE*2] - wsptr[DCTSIZE*1]; - tmp3 = dataptr[DCTSIZE*3] - wsptr[DCTSIZE*0]; - tmp4 = dataptr[DCTSIZE*4] - dataptr[DCTSIZE*7]; - tmp5 = dataptr[DCTSIZE*5] - dataptr[DCTSIZE*6]; - - dataptr[DCTSIZE*0] = (DCTELEM) - DESCALE(MULTIPLY(tmp10 + tmp11 + tmp12, FIX(0.888888889)), /* 8/9 */ - CONST_BITS+1); - dataptr[DCTSIZE*6] = (DCTELEM) - DESCALE(MULTIPLY(tmp13 - tmp14 - tmp15, FIX(0.888888889)), /* 8/9 */ - CONST_BITS+1); - dataptr[DCTSIZE*4] = (DCTELEM) - DESCALE(MULTIPLY(tmp10 - tmp12, FIX(1.088662108)), /* c4 */ - CONST_BITS+1); - dataptr[DCTSIZE*2] = (DCTELEM) - DESCALE(MULTIPLY(tmp14 - tmp15, FIX(0.888888889)) + /* 8/9 */ - MULTIPLY(tmp13 + tmp15, FIX(1.214244803)), /* c2 */ - CONST_BITS+1); - - /* Odd part */ - - tmp10 = MULTIPLY(tmp1 + tmp4, FIX(0.481063200)); /* c9 */ - tmp14 = tmp10 + MULTIPLY(tmp1, FIX(0.680326102)); /* c3-c9 */ - tmp15 = tmp10 - MULTIPLY(tmp4, FIX(1.642452502)); /* c3+c9 */ - tmp12 = MULTIPLY(tmp0 + tmp2, FIX(0.997307603)); /* c5 */ - tmp13 = MULTIPLY(tmp0 + tmp3, FIX(0.765261039)); /* c7 */ - tmp10 = tmp12 + tmp13 + tmp14 - MULTIPLY(tmp0, FIX(0.516244403)) /* c5+c7-c1 */ - + MULTIPLY(tmp5, FIX(0.164081699)); /* c11 */ - tmp11 = MULTIPLY(tmp2 + tmp3, - FIX(0.164081699)); /* -c11 */ - tmp12 += tmp11 - tmp15 - MULTIPLY(tmp2, FIX(2.079550144)) /* c1+c5-c11 */ - + MULTIPLY(tmp5, FIX(0.765261039)); /* c7 */ - tmp13 += tmp11 - tmp14 + MULTIPLY(tmp3, FIX(0.645144899)) /* c1+c11-c7 */ - - MULTIPLY(tmp5, FIX(0.997307603)); /* c5 */ - tmp11 = tmp15 + MULTIPLY(tmp0 - tmp3, FIX(1.161389302)) /* c3 */ - - MULTIPLY(tmp2 + tmp5, FIX(0.481063200)); /* c9 */ - - dataptr[DCTSIZE*1] = (DCTELEM) DESCALE(tmp10, CONST_BITS+1); - dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp11, CONST_BITS+1); - dataptr[DCTSIZE*5] = (DCTELEM) DESCALE(tmp12, CONST_BITS+1); - dataptr[DCTSIZE*7] = (DCTELEM) DESCALE(tmp13, CONST_BITS+1); - - dataptr++; /* advance pointer to next column */ - wsptr++; /* advance pointer to next column */ - } -} - - -/* - * Perform the forward DCT on a 13x13 sample block. - */ - -GLOBAL(void) -jpeg_fdct_13x13 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) -{ - INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6; - INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15; - INT32 z1, z2; - DCTELEM workspace[8*5]; - DCTELEM *dataptr; - DCTELEM *wsptr; - JSAMPROW elemptr; - int ctr; - SHIFT_TEMPS - - /* Pass 1: process rows. */ - /* Note results are scaled up by sqrt(8) compared to a true DCT. */ - /* cK represents sqrt(2) * cos(K*pi/26). */ - - dataptr = data; - ctr = 0; - for (;;) { - elemptr = sample_data[ctr] + start_col; - - /* Even part */ - - tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[12]); - tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[11]); - tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[10]); - tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[9]); - tmp4 = GETJSAMPLE(elemptr[4]) + GETJSAMPLE(elemptr[8]); - tmp5 = GETJSAMPLE(elemptr[5]) + GETJSAMPLE(elemptr[7]); - tmp6 = GETJSAMPLE(elemptr[6]); - - tmp10 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[12]); - tmp11 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[11]); - tmp12 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[10]); - tmp13 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[9]); - tmp14 = GETJSAMPLE(elemptr[4]) - GETJSAMPLE(elemptr[8]); - tmp15 = GETJSAMPLE(elemptr[5]) - GETJSAMPLE(elemptr[7]); - - /* Apply unsigned->signed conversion */ - dataptr[0] = (DCTELEM) - (tmp0 + tmp1 + tmp2 + tmp3 + tmp4 + tmp5 + tmp6 - 13 * CENTERJSAMPLE); - tmp6 += tmp6; - tmp0 -= tmp6; - tmp1 -= tmp6; - tmp2 -= tmp6; - tmp3 -= tmp6; - tmp4 -= tmp6; - tmp5 -= tmp6; - dataptr[2] = (DCTELEM) - DESCALE(MULTIPLY(tmp0, FIX(1.373119086)) + /* c2 */ - MULTIPLY(tmp1, FIX(1.058554052)) + /* c6 */ - MULTIPLY(tmp2, FIX(0.501487041)) - /* c10 */ - MULTIPLY(tmp3, FIX(0.170464608)) - /* c12 */ - MULTIPLY(tmp4, FIX(0.803364869)) - /* c8 */ - MULTIPLY(tmp5, FIX(1.252223920)), /* c4 */ - CONST_BITS); - z1 = MULTIPLY(tmp0 - tmp2, FIX(1.155388986)) - /* (c4+c6)/2 */ - MULTIPLY(tmp3 - tmp4, FIX(0.435816023)) - /* (c2-c10)/2 */ - MULTIPLY(tmp1 - tmp5, FIX(0.316450131)); /* (c8-c12)/2 */ - z2 = MULTIPLY(tmp0 + tmp2, FIX(0.096834934)) - /* (c4-c6)/2 */ - MULTIPLY(tmp3 + tmp4, FIX(0.937303064)) + /* (c2+c10)/2 */ - MULTIPLY(tmp1 + tmp5, FIX(0.486914739)); /* (c8+c12)/2 */ - - dataptr[4] = (DCTELEM) DESCALE(z1 + z2, CONST_BITS); - dataptr[6] = (DCTELEM) DESCALE(z1 - z2, CONST_BITS); - - /* Odd part */ - - tmp1 = MULTIPLY(tmp10 + tmp11, FIX(1.322312651)); /* c3 */ - tmp2 = MULTIPLY(tmp10 + tmp12, FIX(1.163874945)); /* c5 */ - tmp3 = MULTIPLY(tmp10 + tmp13, FIX(0.937797057)) + /* c7 */ - MULTIPLY(tmp14 + tmp15, FIX(0.338443458)); /* c11 */ - tmp0 = tmp1 + tmp2 + tmp3 - - MULTIPLY(tmp10, FIX(2.020082300)) + /* c3+c5+c7-c1 */ - MULTIPLY(tmp14, FIX(0.318774355)); /* c9-c11 */ - tmp4 = MULTIPLY(tmp14 - tmp15, FIX(0.937797057)) - /* c7 */ - MULTIPLY(tmp11 + tmp12, FIX(0.338443458)); /* c11 */ - tmp5 = MULTIPLY(tmp11 + tmp13, - FIX(1.163874945)); /* -c5 */ - tmp1 += tmp4 + tmp5 + - MULTIPLY(tmp11, FIX(0.837223564)) - /* c5+c9+c11-c3 */ - MULTIPLY(tmp14, FIX(2.341699410)); /* c1+c7 */ - tmp6 = MULTIPLY(tmp12 + tmp13, - FIX(0.657217813)); /* -c9 */ - tmp2 += tmp4 + tmp6 - - MULTIPLY(tmp12, FIX(1.572116027)) + /* c1+c5-c9-c11 */ - MULTIPLY(tmp15, FIX(2.260109708)); /* c3+c7 */ - tmp3 += tmp5 + tmp6 + - MULTIPLY(tmp13, FIX(2.205608352)) - /* c3+c5+c9-c7 */ - MULTIPLY(tmp15, FIX(1.742345811)); /* c1+c11 */ - - dataptr[1] = (DCTELEM) DESCALE(tmp0, CONST_BITS); - dataptr[3] = (DCTELEM) DESCALE(tmp1, CONST_BITS); - dataptr[5] = (DCTELEM) DESCALE(tmp2, CONST_BITS); - dataptr[7] = (DCTELEM) DESCALE(tmp3, CONST_BITS); - - ctr++; - - if (ctr != DCTSIZE) { - if (ctr == 13) - break; /* Done. */ - dataptr += DCTSIZE; /* advance pointer to next row */ - } else - dataptr = workspace; /* switch pointer to extended workspace */ - } - - /* Pass 2: process columns. - * We leave the results scaled up by an overall factor of 8. - * We must also scale the output by (8/13)**2 = 64/169, which we partially - * fold into the constant multipliers and final shifting: - * cK now represents sqrt(2) * cos(K*pi/26) * 128/169. - */ - - dataptr = data; - wsptr = workspace; - for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { - /* Even part */ - - tmp0 = dataptr[DCTSIZE*0] + wsptr[DCTSIZE*4]; - tmp1 = dataptr[DCTSIZE*1] + wsptr[DCTSIZE*3]; - tmp2 = dataptr[DCTSIZE*2] + wsptr[DCTSIZE*2]; - tmp3 = dataptr[DCTSIZE*3] + wsptr[DCTSIZE*1]; - tmp4 = dataptr[DCTSIZE*4] + wsptr[DCTSIZE*0]; - tmp5 = dataptr[DCTSIZE*5] + dataptr[DCTSIZE*7]; - tmp6 = dataptr[DCTSIZE*6]; - - tmp10 = dataptr[DCTSIZE*0] - wsptr[DCTSIZE*4]; - tmp11 = dataptr[DCTSIZE*1] - wsptr[DCTSIZE*3]; - tmp12 = dataptr[DCTSIZE*2] - wsptr[DCTSIZE*2]; - tmp13 = dataptr[DCTSIZE*3] - wsptr[DCTSIZE*1]; - tmp14 = dataptr[DCTSIZE*4] - wsptr[DCTSIZE*0]; - tmp15 = dataptr[DCTSIZE*5] - dataptr[DCTSIZE*7]; - - dataptr[DCTSIZE*0] = (DCTELEM) - DESCALE(MULTIPLY(tmp0 + tmp1 + tmp2 + tmp3 + tmp4 + tmp5 + tmp6, - FIX(0.757396450)), /* 128/169 */ - CONST_BITS+1); - tmp6 += tmp6; - tmp0 -= tmp6; - tmp1 -= tmp6; - tmp2 -= tmp6; - tmp3 -= tmp6; - tmp4 -= tmp6; - tmp5 -= tmp6; - dataptr[DCTSIZE*2] = (DCTELEM) - DESCALE(MULTIPLY(tmp0, FIX(1.039995521)) + /* c2 */ - MULTIPLY(tmp1, FIX(0.801745081)) + /* c6 */ - MULTIPLY(tmp2, FIX(0.379824504)) - /* c10 */ - MULTIPLY(tmp3, FIX(0.129109289)) - /* c12 */ - MULTIPLY(tmp4, FIX(0.608465700)) - /* c8 */ - MULTIPLY(tmp5, FIX(0.948429952)), /* c4 */ - CONST_BITS+1); - z1 = MULTIPLY(tmp0 - tmp2, FIX(0.875087516)) - /* (c4+c6)/2 */ - MULTIPLY(tmp3 - tmp4, FIX(0.330085509)) - /* (c2-c10)/2 */ - MULTIPLY(tmp1 - tmp5, FIX(0.239678205)); /* (c8-c12)/2 */ - z2 = MULTIPLY(tmp0 + tmp2, FIX(0.073342435)) - /* (c4-c6)/2 */ - MULTIPLY(tmp3 + tmp4, FIX(0.709910013)) + /* (c2+c10)/2 */ - MULTIPLY(tmp1 + tmp5, FIX(0.368787494)); /* (c8+c12)/2 */ - - dataptr[DCTSIZE*4] = (DCTELEM) DESCALE(z1 + z2, CONST_BITS+1); - dataptr[DCTSIZE*6] = (DCTELEM) DESCALE(z1 - z2, CONST_BITS+1); - - /* Odd part */ - - tmp1 = MULTIPLY(tmp10 + tmp11, FIX(1.001514908)); /* c3 */ - tmp2 = MULTIPLY(tmp10 + tmp12, FIX(0.881514751)); /* c5 */ - tmp3 = MULTIPLY(tmp10 + tmp13, FIX(0.710284161)) + /* c7 */ - MULTIPLY(tmp14 + tmp15, FIX(0.256335874)); /* c11 */ - tmp0 = tmp1 + tmp2 + tmp3 - - MULTIPLY(tmp10, FIX(1.530003162)) + /* c3+c5+c7-c1 */ - MULTIPLY(tmp14, FIX(0.241438564)); /* c9-c11 */ - tmp4 = MULTIPLY(tmp14 - tmp15, FIX(0.710284161)) - /* c7 */ - MULTIPLY(tmp11 + tmp12, FIX(0.256335874)); /* c11 */ - tmp5 = MULTIPLY(tmp11 + tmp13, - FIX(0.881514751)); /* -c5 */ - tmp1 += tmp4 + tmp5 + - MULTIPLY(tmp11, FIX(0.634110155)) - /* c5+c9+c11-c3 */ - MULTIPLY(tmp14, FIX(1.773594819)); /* c1+c7 */ - tmp6 = MULTIPLY(tmp12 + tmp13, - FIX(0.497774438)); /* -c9 */ - tmp2 += tmp4 + tmp6 - - MULTIPLY(tmp12, FIX(1.190715098)) + /* c1+c5-c9-c11 */ - MULTIPLY(tmp15, FIX(1.711799069)); /* c3+c7 */ - tmp3 += tmp5 + tmp6 + - MULTIPLY(tmp13, FIX(1.670519935)) - /* c3+c5+c9-c7 */ - MULTIPLY(tmp15, FIX(1.319646532)); /* c1+c11 */ - - dataptr[DCTSIZE*1] = (DCTELEM) DESCALE(tmp0, CONST_BITS+1); - dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp1, CONST_BITS+1); - dataptr[DCTSIZE*5] = (DCTELEM) DESCALE(tmp2, CONST_BITS+1); - dataptr[DCTSIZE*7] = (DCTELEM) DESCALE(tmp3, CONST_BITS+1); - - dataptr++; /* advance pointer to next column */ - wsptr++; /* advance pointer to next column */ - } -} - - -/* - * Perform the forward DCT on a 14x14 sample block. - */ - -GLOBAL(void) -jpeg_fdct_14x14 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) -{ - INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6; - INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15, tmp16; - DCTELEM workspace[8*6]; - DCTELEM *dataptr; - DCTELEM *wsptr; - JSAMPROW elemptr; - int ctr; - SHIFT_TEMPS - - /* Pass 1: process rows. */ - /* Note results are scaled up by sqrt(8) compared to a true DCT. */ - /* cK represents sqrt(2) * cos(K*pi/28). */ - - dataptr = data; - ctr = 0; - for (;;) { - elemptr = sample_data[ctr] + start_col; - - /* Even part */ - - tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[13]); - tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[12]); - tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[11]); - tmp13 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[10]); - tmp4 = GETJSAMPLE(elemptr[4]) + GETJSAMPLE(elemptr[9]); - tmp5 = GETJSAMPLE(elemptr[5]) + GETJSAMPLE(elemptr[8]); - tmp6 = GETJSAMPLE(elemptr[6]) + GETJSAMPLE(elemptr[7]); - - tmp10 = tmp0 + tmp6; - tmp14 = tmp0 - tmp6; - tmp11 = tmp1 + tmp5; - tmp15 = tmp1 - tmp5; - tmp12 = tmp2 + tmp4; - tmp16 = tmp2 - tmp4; - - tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[13]); - tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[12]); - tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[11]); - tmp3 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[10]); - tmp4 = GETJSAMPLE(elemptr[4]) - GETJSAMPLE(elemptr[9]); - tmp5 = GETJSAMPLE(elemptr[5]) - GETJSAMPLE(elemptr[8]); - tmp6 = GETJSAMPLE(elemptr[6]) - GETJSAMPLE(elemptr[7]); - - /* Apply unsigned->signed conversion */ - dataptr[0] = (DCTELEM) - (tmp10 + tmp11 + tmp12 + tmp13 - 14 * CENTERJSAMPLE); - tmp13 += tmp13; - dataptr[4] = (DCTELEM) - DESCALE(MULTIPLY(tmp10 - tmp13, FIX(1.274162392)) + /* c4 */ - MULTIPLY(tmp11 - tmp13, FIX(0.314692123)) - /* c12 */ - MULTIPLY(tmp12 - tmp13, FIX(0.881747734)), /* c8 */ - CONST_BITS); - - tmp10 = MULTIPLY(tmp14 + tmp15, FIX(1.105676686)); /* c6 */ - - dataptr[2] = (DCTELEM) - DESCALE(tmp10 + MULTIPLY(tmp14, FIX(0.273079590)) /* c2-c6 */ - + MULTIPLY(tmp16, FIX(0.613604268)), /* c10 */ - CONST_BITS); - dataptr[6] = (DCTELEM) - DESCALE(tmp10 - MULTIPLY(tmp15, FIX(1.719280954)) /* c6+c10 */ - - MULTIPLY(tmp16, FIX(1.378756276)), /* c2 */ - CONST_BITS); - - /* Odd part */ - - tmp10 = tmp1 + tmp2; - tmp11 = tmp5 - tmp4; - dataptr[7] = (DCTELEM) (tmp0 - tmp10 + tmp3 - tmp11 - tmp6); - tmp3 <<= CONST_BITS; - tmp10 = MULTIPLY(tmp10, - FIX(0.158341681)); /* -c13 */ - tmp11 = MULTIPLY(tmp11, FIX(1.405321284)); /* c1 */ - tmp10 += tmp11 - tmp3; - tmp11 = MULTIPLY(tmp0 + tmp2, FIX(1.197448846)) + /* c5 */ - MULTIPLY(tmp4 + tmp6, FIX(0.752406978)); /* c9 */ - dataptr[5] = (DCTELEM) - DESCALE(tmp10 + tmp11 - MULTIPLY(tmp2, FIX(2.373959773)) /* c3+c5-c13 */ - + MULTIPLY(tmp4, FIX(1.119999435)), /* c1+c11-c9 */ - CONST_BITS); - tmp12 = MULTIPLY(tmp0 + tmp1, FIX(1.334852607)) + /* c3 */ - MULTIPLY(tmp5 - tmp6, FIX(0.467085129)); /* c11 */ - dataptr[3] = (DCTELEM) - DESCALE(tmp10 + tmp12 - MULTIPLY(tmp1, FIX(0.424103948)) /* c3-c9-c13 */ - - MULTIPLY(tmp5, FIX(3.069855259)), /* c1+c5+c11 */ - CONST_BITS); - dataptr[1] = (DCTELEM) - DESCALE(tmp11 + tmp12 + tmp3 + tmp6 - - MULTIPLY(tmp0 + tmp6, FIX(1.126980169)), /* c3+c5-c1 */ - CONST_BITS); - - ctr++; - - if (ctr != DCTSIZE) { - if (ctr == 14) - break; /* Done. */ - dataptr += DCTSIZE; /* advance pointer to next row */ - } else - dataptr = workspace; /* switch pointer to extended workspace */ - } - - /* Pass 2: process columns. - * We leave the results scaled up by an overall factor of 8. - * We must also scale the output by (8/14)**2 = 16/49, which we partially - * fold into the constant multipliers and final shifting: - * cK now represents sqrt(2) * cos(K*pi/28) * 32/49. - */ - - dataptr = data; - wsptr = workspace; - for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { - /* Even part */ - - tmp0 = dataptr[DCTSIZE*0] + wsptr[DCTSIZE*5]; - tmp1 = dataptr[DCTSIZE*1] + wsptr[DCTSIZE*4]; - tmp2 = dataptr[DCTSIZE*2] + wsptr[DCTSIZE*3]; - tmp13 = dataptr[DCTSIZE*3] + wsptr[DCTSIZE*2]; - tmp4 = dataptr[DCTSIZE*4] + wsptr[DCTSIZE*1]; - tmp5 = dataptr[DCTSIZE*5] + wsptr[DCTSIZE*0]; - tmp6 = dataptr[DCTSIZE*6] + dataptr[DCTSIZE*7]; - - tmp10 = tmp0 + tmp6; - tmp14 = tmp0 - tmp6; - tmp11 = tmp1 + tmp5; - tmp15 = tmp1 - tmp5; - tmp12 = tmp2 + tmp4; - tmp16 = tmp2 - tmp4; - - tmp0 = dataptr[DCTSIZE*0] - wsptr[DCTSIZE*5]; - tmp1 = dataptr[DCTSIZE*1] - wsptr[DCTSIZE*4]; - tmp2 = dataptr[DCTSIZE*2] - wsptr[DCTSIZE*3]; - tmp3 = dataptr[DCTSIZE*3] - wsptr[DCTSIZE*2]; - tmp4 = dataptr[DCTSIZE*4] - wsptr[DCTSIZE*1]; - tmp5 = dataptr[DCTSIZE*5] - wsptr[DCTSIZE*0]; - tmp6 = dataptr[DCTSIZE*6] - dataptr[DCTSIZE*7]; - - dataptr[DCTSIZE*0] = (DCTELEM) - DESCALE(MULTIPLY(tmp10 + tmp11 + tmp12 + tmp13, - FIX(0.653061224)), /* 32/49 */ - CONST_BITS+1); - tmp13 += tmp13; - dataptr[DCTSIZE*4] = (DCTELEM) - DESCALE(MULTIPLY(tmp10 - tmp13, FIX(0.832106052)) + /* c4 */ - MULTIPLY(tmp11 - tmp13, FIX(0.205513223)) - /* c12 */ - MULTIPLY(tmp12 - tmp13, FIX(0.575835255)), /* c8 */ - CONST_BITS+1); - - tmp10 = MULTIPLY(tmp14 + tmp15, FIX(0.722074570)); /* c6 */ - - dataptr[DCTSIZE*2] = (DCTELEM) - DESCALE(tmp10 + MULTIPLY(tmp14, FIX(0.178337691)) /* c2-c6 */ - + MULTIPLY(tmp16, FIX(0.400721155)), /* c10 */ - CONST_BITS+1); - dataptr[DCTSIZE*6] = (DCTELEM) - DESCALE(tmp10 - MULTIPLY(tmp15, FIX(1.122795725)) /* c6+c10 */ - - MULTIPLY(tmp16, FIX(0.900412262)), /* c2 */ - CONST_BITS+1); - - /* Odd part */ - - tmp10 = tmp1 + tmp2; - tmp11 = tmp5 - tmp4; - dataptr[DCTSIZE*7] = (DCTELEM) - DESCALE(MULTIPLY(tmp0 - tmp10 + tmp3 - tmp11 - tmp6, - FIX(0.653061224)), /* 32/49 */ - CONST_BITS+1); - tmp3 = MULTIPLY(tmp3 , FIX(0.653061224)); /* 32/49 */ - tmp10 = MULTIPLY(tmp10, - FIX(0.103406812)); /* -c13 */ - tmp11 = MULTIPLY(tmp11, FIX(0.917760839)); /* c1 */ - tmp10 += tmp11 - tmp3; - tmp11 = MULTIPLY(tmp0 + tmp2, FIX(0.782007410)) + /* c5 */ - MULTIPLY(tmp4 + tmp6, FIX(0.491367823)); /* c9 */ - dataptr[DCTSIZE*5] = (DCTELEM) - DESCALE(tmp10 + tmp11 - MULTIPLY(tmp2, FIX(1.550341076)) /* c3+c5-c13 */ - + MULTIPLY(tmp4, FIX(0.731428202)), /* c1+c11-c9 */ - CONST_BITS+1); - tmp12 = MULTIPLY(tmp0 + tmp1, FIX(0.871740478)) + /* c3 */ - MULTIPLY(tmp5 - tmp6, FIX(0.305035186)); /* c11 */ - dataptr[DCTSIZE*3] = (DCTELEM) - DESCALE(tmp10 + tmp12 - MULTIPLY(tmp1, FIX(0.276965844)) /* c3-c9-c13 */ - - MULTIPLY(tmp5, FIX(2.004803435)), /* c1+c5+c11 */ - CONST_BITS+1); - dataptr[DCTSIZE*1] = (DCTELEM) - DESCALE(tmp11 + tmp12 + tmp3 - - MULTIPLY(tmp0, FIX(0.735987049)) /* c3+c5-c1 */ - - MULTIPLY(tmp6, FIX(0.082925825)), /* c9-c11-c13 */ - CONST_BITS+1); - - dataptr++; /* advance pointer to next column */ - wsptr++; /* advance pointer to next column */ - } -} - - -/* - * Perform the forward DCT on a 15x15 sample block. - */ - -GLOBAL(void) -jpeg_fdct_15x15 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) -{ - INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7; - INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15, tmp16; - INT32 z1, z2, z3; - DCTELEM workspace[8*7]; - DCTELEM *dataptr; - DCTELEM *wsptr; - JSAMPROW elemptr; - int ctr; - SHIFT_TEMPS - - /* Pass 1: process rows. */ - /* Note results are scaled up by sqrt(8) compared to a true DCT. */ - /* cK represents sqrt(2) * cos(K*pi/30). */ - - dataptr = data; - ctr = 0; - for (;;) { - elemptr = sample_data[ctr] + start_col; - - /* Even part */ - - tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[14]); - tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[13]); - tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[12]); - tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[11]); - tmp4 = GETJSAMPLE(elemptr[4]) + GETJSAMPLE(elemptr[10]); - tmp5 = GETJSAMPLE(elemptr[5]) + GETJSAMPLE(elemptr[9]); - tmp6 = GETJSAMPLE(elemptr[6]) + GETJSAMPLE(elemptr[8]); - tmp7 = GETJSAMPLE(elemptr[7]); - - tmp10 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[14]); - tmp11 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[13]); - tmp12 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[12]); - tmp13 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[11]); - tmp14 = GETJSAMPLE(elemptr[4]) - GETJSAMPLE(elemptr[10]); - tmp15 = GETJSAMPLE(elemptr[5]) - GETJSAMPLE(elemptr[9]); - tmp16 = GETJSAMPLE(elemptr[6]) - GETJSAMPLE(elemptr[8]); - - z1 = tmp0 + tmp4 + tmp5; - z2 = tmp1 + tmp3 + tmp6; - z3 = tmp2 + tmp7; - /* Apply unsigned->signed conversion */ - dataptr[0] = (DCTELEM) (z1 + z2 + z3 - 15 * CENTERJSAMPLE); - z3 += z3; - dataptr[6] = (DCTELEM) - DESCALE(MULTIPLY(z1 - z3, FIX(1.144122806)) - /* c6 */ - MULTIPLY(z2 - z3, FIX(0.437016024)), /* c12 */ - CONST_BITS); - tmp2 += ((tmp1 + tmp4) >> 1) - tmp7 - tmp7; - z1 = MULTIPLY(tmp3 - tmp2, FIX(1.531135173)) - /* c2+c14 */ - MULTIPLY(tmp6 - tmp2, FIX(2.238241955)); /* c4+c8 */ - z2 = MULTIPLY(tmp5 - tmp2, FIX(0.798468008)) - /* c8-c14 */ - MULTIPLY(tmp0 - tmp2, FIX(0.091361227)); /* c2-c4 */ - z3 = MULTIPLY(tmp0 - tmp3, FIX(1.383309603)) + /* c2 */ - MULTIPLY(tmp6 - tmp5, FIX(0.946293579)) + /* c8 */ - MULTIPLY(tmp1 - tmp4, FIX(0.790569415)); /* (c6+c12)/2 */ - - dataptr[2] = (DCTELEM) DESCALE(z1 + z3, CONST_BITS); - dataptr[4] = (DCTELEM) DESCALE(z2 + z3, CONST_BITS); - - /* Odd part */ - - tmp2 = MULTIPLY(tmp10 - tmp12 - tmp13 + tmp15 + tmp16, - FIX(1.224744871)); /* c5 */ - tmp1 = MULTIPLY(tmp10 - tmp14 - tmp15, FIX(1.344997024)) + /* c3 */ - MULTIPLY(tmp11 - tmp13 - tmp16, FIX(0.831253876)); /* c9 */ - tmp12 = MULTIPLY(tmp12, FIX(1.224744871)); /* c5 */ - tmp4 = MULTIPLY(tmp10 - tmp16, FIX(1.406466353)) + /* c1 */ - MULTIPLY(tmp11 + tmp14, FIX(1.344997024)) + /* c3 */ - MULTIPLY(tmp13 + tmp15, FIX(0.575212477)); /* c11 */ - tmp0 = MULTIPLY(tmp13, FIX(0.475753014)) - /* c7-c11 */ - MULTIPLY(tmp14, FIX(0.513743148)) + /* c3-c9 */ - MULTIPLY(tmp16, FIX(1.700497885)) + tmp4 + tmp12; /* c1+c13 */ - tmp3 = MULTIPLY(tmp10, - FIX(0.355500862)) - /* -(c1-c7) */ - MULTIPLY(tmp11, FIX(2.176250899)) - /* c3+c9 */ - MULTIPLY(tmp15, FIX(0.869244010)) + tmp4 - tmp12; /* c11+c13 */ - - dataptr[1] = (DCTELEM) DESCALE(tmp0, CONST_BITS); - dataptr[3] = (DCTELEM) DESCALE(tmp1, CONST_BITS); - dataptr[5] = (DCTELEM) DESCALE(tmp2, CONST_BITS); - dataptr[7] = (DCTELEM) DESCALE(tmp3, CONST_BITS); - - ctr++; - - if (ctr != DCTSIZE) { - if (ctr == 15) - break; /* Done. */ - dataptr += DCTSIZE; /* advance pointer to next row */ - } else - dataptr = workspace; /* switch pointer to extended workspace */ - } - - /* Pass 2: process columns. - * We leave the results scaled up by an overall factor of 8. - * We must also scale the output by (8/15)**2 = 64/225, which we partially - * fold into the constant multipliers and final shifting: - * cK now represents sqrt(2) * cos(K*pi/30) * 256/225. - */ - - dataptr = data; - wsptr = workspace; - for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { - /* Even part */ - - tmp0 = dataptr[DCTSIZE*0] + wsptr[DCTSIZE*6]; - tmp1 = dataptr[DCTSIZE*1] + wsptr[DCTSIZE*5]; - tmp2 = dataptr[DCTSIZE*2] + wsptr[DCTSIZE*4]; - tmp3 = dataptr[DCTSIZE*3] + wsptr[DCTSIZE*3]; - tmp4 = dataptr[DCTSIZE*4] + wsptr[DCTSIZE*2]; - tmp5 = dataptr[DCTSIZE*5] + wsptr[DCTSIZE*1]; - tmp6 = dataptr[DCTSIZE*6] + wsptr[DCTSIZE*0]; - tmp7 = dataptr[DCTSIZE*7]; - - tmp10 = dataptr[DCTSIZE*0] - wsptr[DCTSIZE*6]; - tmp11 = dataptr[DCTSIZE*1] - wsptr[DCTSIZE*5]; - tmp12 = dataptr[DCTSIZE*2] - wsptr[DCTSIZE*4]; - tmp13 = dataptr[DCTSIZE*3] - wsptr[DCTSIZE*3]; - tmp14 = dataptr[DCTSIZE*4] - wsptr[DCTSIZE*2]; - tmp15 = dataptr[DCTSIZE*5] - wsptr[DCTSIZE*1]; - tmp16 = dataptr[DCTSIZE*6] - wsptr[DCTSIZE*0]; - - z1 = tmp0 + tmp4 + tmp5; - z2 = tmp1 + tmp3 + tmp6; - z3 = tmp2 + tmp7; - dataptr[DCTSIZE*0] = (DCTELEM) - DESCALE(MULTIPLY(z1 + z2 + z3, FIX(1.137777778)), /* 256/225 */ - CONST_BITS+2); - z3 += z3; - dataptr[DCTSIZE*6] = (DCTELEM) - DESCALE(MULTIPLY(z1 - z3, FIX(1.301757503)) - /* c6 */ - MULTIPLY(z2 - z3, FIX(0.497227121)), /* c12 */ - CONST_BITS+2); - tmp2 += ((tmp1 + tmp4) >> 1) - tmp7 - tmp7; - z1 = MULTIPLY(tmp3 - tmp2, FIX(1.742091575)) - /* c2+c14 */ - MULTIPLY(tmp6 - tmp2, FIX(2.546621957)); /* c4+c8 */ - z2 = MULTIPLY(tmp5 - tmp2, FIX(0.908479156)) - /* c8-c14 */ - MULTIPLY(tmp0 - tmp2, FIX(0.103948774)); /* c2-c4 */ - z3 = MULTIPLY(tmp0 - tmp3, FIX(1.573898926)) + /* c2 */ - MULTIPLY(tmp6 - tmp5, FIX(1.076671805)) + /* c8 */ - MULTIPLY(tmp1 - tmp4, FIX(0.899492312)); /* (c6+c12)/2 */ - - dataptr[DCTSIZE*2] = (DCTELEM) DESCALE(z1 + z3, CONST_BITS+2); - dataptr[DCTSIZE*4] = (DCTELEM) DESCALE(z2 + z3, CONST_BITS+2); - - /* Odd part */ - - tmp2 = MULTIPLY(tmp10 - tmp12 - tmp13 + tmp15 + tmp16, - FIX(1.393487498)); /* c5 */ - tmp1 = MULTIPLY(tmp10 - tmp14 - tmp15, FIX(1.530307725)) + /* c3 */ - MULTIPLY(tmp11 - tmp13 - tmp16, FIX(0.945782187)); /* c9 */ - tmp12 = MULTIPLY(tmp12, FIX(1.393487498)); /* c5 */ - tmp4 = MULTIPLY(tmp10 - tmp16, FIX(1.600246161)) + /* c1 */ - MULTIPLY(tmp11 + tmp14, FIX(1.530307725)) + /* c3 */ - MULTIPLY(tmp13 + tmp15, FIX(0.654463974)); /* c11 */ - tmp0 = MULTIPLY(tmp13, FIX(0.541301207)) - /* c7-c11 */ - MULTIPLY(tmp14, FIX(0.584525538)) + /* c3-c9 */ - MULTIPLY(tmp16, FIX(1.934788705)) + tmp4 + tmp12; /* c1+c13 */ - tmp3 = MULTIPLY(tmp10, - FIX(0.404480980)) - /* -(c1-c7) */ - MULTIPLY(tmp11, FIX(2.476089912)) - /* c3+c9 */ - MULTIPLY(tmp15, FIX(0.989006518)) + tmp4 - tmp12; /* c11+c13 */ - - dataptr[DCTSIZE*1] = (DCTELEM) DESCALE(tmp0, CONST_BITS+2); - dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp1, CONST_BITS+2); - dataptr[DCTSIZE*5] = (DCTELEM) DESCALE(tmp2, CONST_BITS+2); - dataptr[DCTSIZE*7] = (DCTELEM) DESCALE(tmp3, CONST_BITS+2); - - dataptr++; /* advance pointer to next column */ - wsptr++; /* advance pointer to next column */ - } -} - - -/* - * Perform the forward DCT on a 16x16 sample block. - */ - -GLOBAL(void) -jpeg_fdct_16x16 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) -{ - INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7; - INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15, tmp16, tmp17; - DCTELEM workspace[DCTSIZE2]; - DCTELEM *dataptr; - DCTELEM *wsptr; - JSAMPROW elemptr; - int ctr; - SHIFT_TEMPS - - /* Pass 1: process rows. */ - /* Note results are scaled up by sqrt(8) compared to a true DCT; */ - /* furthermore, we scale the results by 2**PASS1_BITS. */ - /* cK represents sqrt(2) * cos(K*pi/32). */ - - dataptr = data; - ctr = 0; - for (;;) { - elemptr = sample_data[ctr] + start_col; - - /* Even part */ - - tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[15]); - tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[14]); - tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[13]); - tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[12]); - tmp4 = GETJSAMPLE(elemptr[4]) + GETJSAMPLE(elemptr[11]); - tmp5 = GETJSAMPLE(elemptr[5]) + GETJSAMPLE(elemptr[10]); - tmp6 = GETJSAMPLE(elemptr[6]) + GETJSAMPLE(elemptr[9]); - tmp7 = GETJSAMPLE(elemptr[7]) + GETJSAMPLE(elemptr[8]); - - tmp10 = tmp0 + tmp7; - tmp14 = tmp0 - tmp7; - tmp11 = tmp1 + tmp6; - tmp15 = tmp1 - tmp6; - tmp12 = tmp2 + tmp5; - tmp16 = tmp2 - tmp5; - tmp13 = tmp3 + tmp4; - tmp17 = tmp3 - tmp4; - - tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[15]); - tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[14]); - tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[13]); - tmp3 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[12]); - tmp4 = GETJSAMPLE(elemptr[4]) - GETJSAMPLE(elemptr[11]); - tmp5 = GETJSAMPLE(elemptr[5]) - GETJSAMPLE(elemptr[10]); - tmp6 = GETJSAMPLE(elemptr[6]) - GETJSAMPLE(elemptr[9]); - tmp7 = GETJSAMPLE(elemptr[7]) - GETJSAMPLE(elemptr[8]); - - /* Apply unsigned->signed conversion */ - dataptr[0] = (DCTELEM) - ((tmp10 + tmp11 + tmp12 + tmp13 - 16 * CENTERJSAMPLE) << PASS1_BITS); - dataptr[4] = (DCTELEM) - DESCALE(MULTIPLY(tmp10 - tmp13, FIX(1.306562965)) + /* c4[16] = c2[8] */ - MULTIPLY(tmp11 - tmp12, FIX_0_541196100), /* c12[16] = c6[8] */ - CONST_BITS-PASS1_BITS); - - tmp10 = MULTIPLY(tmp17 - tmp15, FIX(0.275899379)) + /* c14[16] = c7[8] */ - MULTIPLY(tmp14 - tmp16, FIX(1.387039845)); /* c2[16] = c1[8] */ - - dataptr[2] = (DCTELEM) - DESCALE(tmp10 + MULTIPLY(tmp15, FIX(1.451774982)) /* c6+c14 */ - + MULTIPLY(tmp16, FIX(2.172734804)), /* c2+c10 */ - CONST_BITS-PASS1_BITS); - dataptr[6] = (DCTELEM) - DESCALE(tmp10 - MULTIPLY(tmp14, FIX(0.211164243)) /* c2-c6 */ - - MULTIPLY(tmp17, FIX(1.061594338)), /* c10+c14 */ - CONST_BITS-PASS1_BITS); - - /* Odd part */ - - tmp11 = MULTIPLY(tmp0 + tmp1, FIX(1.353318001)) + /* c3 */ - MULTIPLY(tmp6 - tmp7, FIX(0.410524528)); /* c13 */ - tmp12 = MULTIPLY(tmp0 + tmp2, FIX(1.247225013)) + /* c5 */ - MULTIPLY(tmp5 + tmp7, FIX(0.666655658)); /* c11 */ - tmp13 = MULTIPLY(tmp0 + tmp3, FIX(1.093201867)) + /* c7 */ - MULTIPLY(tmp4 - tmp7, FIX(0.897167586)); /* c9 */ - tmp14 = MULTIPLY(tmp1 + tmp2, FIX(0.138617169)) + /* c15 */ - MULTIPLY(tmp6 - tmp5, FIX(1.407403738)); /* c1 */ - tmp15 = MULTIPLY(tmp1 + tmp3, - FIX(0.666655658)) + /* -c11 */ - MULTIPLY(tmp4 + tmp6, - FIX(1.247225013)); /* -c5 */ - tmp16 = MULTIPLY(tmp2 + tmp3, - FIX(1.353318001)) + /* -c3 */ - MULTIPLY(tmp5 - tmp4, FIX(0.410524528)); /* c13 */ - tmp10 = tmp11 + tmp12 + tmp13 - - MULTIPLY(tmp0, FIX(2.286341144)) + /* c7+c5+c3-c1 */ - MULTIPLY(tmp7, FIX(0.779653625)); /* c15+c13-c11+c9 */ - tmp11 += tmp14 + tmp15 + MULTIPLY(tmp1, FIX(0.071888074)) /* c9-c3-c15+c11 */ - - MULTIPLY(tmp6, FIX(1.663905119)); /* c7+c13+c1-c5 */ - tmp12 += tmp14 + tmp16 - MULTIPLY(tmp2, FIX(1.125726048)) /* c7+c5+c15-c3 */ - + MULTIPLY(tmp5, FIX(1.227391138)); /* c9-c11+c1-c13 */ - tmp13 += tmp15 + tmp16 + MULTIPLY(tmp3, FIX(1.065388962)) /* c15+c3+c11-c7 */ - + MULTIPLY(tmp4, FIX(2.167985692)); /* c1+c13+c5-c9 */ - - dataptr[1] = (DCTELEM) DESCALE(tmp10, CONST_BITS-PASS1_BITS); - dataptr[3] = (DCTELEM) DESCALE(tmp11, CONST_BITS-PASS1_BITS); - dataptr[5] = (DCTELEM) DESCALE(tmp12, CONST_BITS-PASS1_BITS); - dataptr[7] = (DCTELEM) DESCALE(tmp13, CONST_BITS-PASS1_BITS); - - ctr++; - - if (ctr != DCTSIZE) { - if (ctr == DCTSIZE * 2) - break; /* Done. */ - dataptr += DCTSIZE; /* advance pointer to next row */ - } else - dataptr = workspace; /* switch pointer to extended workspace */ - } - - /* Pass 2: process columns. - * We remove the PASS1_BITS scaling, but leave the results scaled up - * by an overall factor of 8. - * We must also scale the output by (8/16)**2 = 1/2**2. - */ - - dataptr = data; - wsptr = workspace; - for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { - /* Even part */ - - tmp0 = dataptr[DCTSIZE*0] + wsptr[DCTSIZE*7]; - tmp1 = dataptr[DCTSIZE*1] + wsptr[DCTSIZE*6]; - tmp2 = dataptr[DCTSIZE*2] + wsptr[DCTSIZE*5]; - tmp3 = dataptr[DCTSIZE*3] + wsptr[DCTSIZE*4]; - tmp4 = dataptr[DCTSIZE*4] + wsptr[DCTSIZE*3]; - tmp5 = dataptr[DCTSIZE*5] + wsptr[DCTSIZE*2]; - tmp6 = dataptr[DCTSIZE*6] + wsptr[DCTSIZE*1]; - tmp7 = dataptr[DCTSIZE*7] + wsptr[DCTSIZE*0]; - - tmp10 = tmp0 + tmp7; - tmp14 = tmp0 - tmp7; - tmp11 = tmp1 + tmp6; - tmp15 = tmp1 - tmp6; - tmp12 = tmp2 + tmp5; - tmp16 = tmp2 - tmp5; - tmp13 = tmp3 + tmp4; - tmp17 = tmp3 - tmp4; - - tmp0 = dataptr[DCTSIZE*0] - wsptr[DCTSIZE*7]; - tmp1 = dataptr[DCTSIZE*1] - wsptr[DCTSIZE*6]; - tmp2 = dataptr[DCTSIZE*2] - wsptr[DCTSIZE*5]; - tmp3 = dataptr[DCTSIZE*3] - wsptr[DCTSIZE*4]; - tmp4 = dataptr[DCTSIZE*4] - wsptr[DCTSIZE*3]; - tmp5 = dataptr[DCTSIZE*5] - wsptr[DCTSIZE*2]; - tmp6 = dataptr[DCTSIZE*6] - wsptr[DCTSIZE*1]; - tmp7 = dataptr[DCTSIZE*7] - wsptr[DCTSIZE*0]; - - dataptr[DCTSIZE*0] = (DCTELEM) - DESCALE(tmp10 + tmp11 + tmp12 + tmp13, PASS1_BITS+2); - dataptr[DCTSIZE*4] = (DCTELEM) - DESCALE(MULTIPLY(tmp10 - tmp13, FIX(1.306562965)) + /* c4[16] = c2[8] */ - MULTIPLY(tmp11 - tmp12, FIX_0_541196100), /* c12[16] = c6[8] */ - CONST_BITS+PASS1_BITS+2); - - tmp10 = MULTIPLY(tmp17 - tmp15, FIX(0.275899379)) + /* c14[16] = c7[8] */ - MULTIPLY(tmp14 - tmp16, FIX(1.387039845)); /* c2[16] = c1[8] */ - - dataptr[DCTSIZE*2] = (DCTELEM) - DESCALE(tmp10 + MULTIPLY(tmp15, FIX(1.451774982)) /* c6+c14 */ - + MULTIPLY(tmp16, FIX(2.172734804)), /* c2+10 */ - CONST_BITS+PASS1_BITS+2); - dataptr[DCTSIZE*6] = (DCTELEM) - DESCALE(tmp10 - MULTIPLY(tmp14, FIX(0.211164243)) /* c2-c6 */ - - MULTIPLY(tmp17, FIX(1.061594338)), /* c10+c14 */ - CONST_BITS+PASS1_BITS+2); - - /* Odd part */ - - tmp11 = MULTIPLY(tmp0 + tmp1, FIX(1.353318001)) + /* c3 */ - MULTIPLY(tmp6 - tmp7, FIX(0.410524528)); /* c13 */ - tmp12 = MULTIPLY(tmp0 + tmp2, FIX(1.247225013)) + /* c5 */ - MULTIPLY(tmp5 + tmp7, FIX(0.666655658)); /* c11 */ - tmp13 = MULTIPLY(tmp0 + tmp3, FIX(1.093201867)) + /* c7 */ - MULTIPLY(tmp4 - tmp7, FIX(0.897167586)); /* c9 */ - tmp14 = MULTIPLY(tmp1 + tmp2, FIX(0.138617169)) + /* c15 */ - MULTIPLY(tmp6 - tmp5, FIX(1.407403738)); /* c1 */ - tmp15 = MULTIPLY(tmp1 + tmp3, - FIX(0.666655658)) + /* -c11 */ - MULTIPLY(tmp4 + tmp6, - FIX(1.247225013)); /* -c5 */ - tmp16 = MULTIPLY(tmp2 + tmp3, - FIX(1.353318001)) + /* -c3 */ - MULTIPLY(tmp5 - tmp4, FIX(0.410524528)); /* c13 */ - tmp10 = tmp11 + tmp12 + tmp13 - - MULTIPLY(tmp0, FIX(2.286341144)) + /* c7+c5+c3-c1 */ - MULTIPLY(tmp7, FIX(0.779653625)); /* c15+c13-c11+c9 */ - tmp11 += tmp14 + tmp15 + MULTIPLY(tmp1, FIX(0.071888074)) /* c9-c3-c15+c11 */ - - MULTIPLY(tmp6, FIX(1.663905119)); /* c7+c13+c1-c5 */ - tmp12 += tmp14 + tmp16 - MULTIPLY(tmp2, FIX(1.125726048)) /* c7+c5+c15-c3 */ - + MULTIPLY(tmp5, FIX(1.227391138)); /* c9-c11+c1-c13 */ - tmp13 += tmp15 + tmp16 + MULTIPLY(tmp3, FIX(1.065388962)) /* c15+c3+c11-c7 */ - + MULTIPLY(tmp4, FIX(2.167985692)); /* c1+c13+c5-c9 */ - - dataptr[DCTSIZE*1] = (DCTELEM) DESCALE(tmp10, CONST_BITS+PASS1_BITS+2); - dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp11, CONST_BITS+PASS1_BITS+2); - dataptr[DCTSIZE*5] = (DCTELEM) DESCALE(tmp12, CONST_BITS+PASS1_BITS+2); - dataptr[DCTSIZE*7] = (DCTELEM) DESCALE(tmp13, CONST_BITS+PASS1_BITS+2); - - dataptr++; /* advance pointer to next column */ - wsptr++; /* advance pointer to next column */ - } -} - - -/* - * Perform the forward DCT on a 16x8 sample block. - * - * 16-point FDCT in pass 1 (rows), 8-point in pass 2 (columns). - */ - -GLOBAL(void) -jpeg_fdct_16x8 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) -{ - INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7; - INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15, tmp16, tmp17; - INT32 z1; - DCTELEM *dataptr; - JSAMPROW elemptr; - int ctr; - SHIFT_TEMPS - - /* Pass 1: process rows. */ - /* Note results are scaled up by sqrt(8) compared to a true DCT; */ - /* furthermore, we scale the results by 2**PASS1_BITS. */ - /* 16-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/32). */ - - dataptr = data; - ctr = 0; - for (ctr = 0; ctr < DCTSIZE; ctr++) { - elemptr = sample_data[ctr] + start_col; - - /* Even part */ - - tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[15]); - tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[14]); - tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[13]); - tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[12]); - tmp4 = GETJSAMPLE(elemptr[4]) + GETJSAMPLE(elemptr[11]); - tmp5 = GETJSAMPLE(elemptr[5]) + GETJSAMPLE(elemptr[10]); - tmp6 = GETJSAMPLE(elemptr[6]) + GETJSAMPLE(elemptr[9]); - tmp7 = GETJSAMPLE(elemptr[7]) + GETJSAMPLE(elemptr[8]); - - tmp10 = tmp0 + tmp7; - tmp14 = tmp0 - tmp7; - tmp11 = tmp1 + tmp6; - tmp15 = tmp1 - tmp6; - tmp12 = tmp2 + tmp5; - tmp16 = tmp2 - tmp5; - tmp13 = tmp3 + tmp4; - tmp17 = tmp3 - tmp4; - - tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[15]); - tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[14]); - tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[13]); - tmp3 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[12]); - tmp4 = GETJSAMPLE(elemptr[4]) - GETJSAMPLE(elemptr[11]); - tmp5 = GETJSAMPLE(elemptr[5]) - GETJSAMPLE(elemptr[10]); - tmp6 = GETJSAMPLE(elemptr[6]) - GETJSAMPLE(elemptr[9]); - tmp7 = GETJSAMPLE(elemptr[7]) - GETJSAMPLE(elemptr[8]); - - /* Apply unsigned->signed conversion */ - dataptr[0] = (DCTELEM) - ((tmp10 + tmp11 + tmp12 + tmp13 - 16 * CENTERJSAMPLE) << PASS1_BITS); - dataptr[4] = (DCTELEM) - DESCALE(MULTIPLY(tmp10 - tmp13, FIX(1.306562965)) + /* c4[16] = c2[8] */ - MULTIPLY(tmp11 - tmp12, FIX_0_541196100), /* c12[16] = c6[8] */ - CONST_BITS-PASS1_BITS); - - tmp10 = MULTIPLY(tmp17 - tmp15, FIX(0.275899379)) + /* c14[16] = c7[8] */ - MULTIPLY(tmp14 - tmp16, FIX(1.387039845)); /* c2[16] = c1[8] */ - - dataptr[2] = (DCTELEM) - DESCALE(tmp10 + MULTIPLY(tmp15, FIX(1.451774982)) /* c6+c14 */ - + MULTIPLY(tmp16, FIX(2.172734804)), /* c2+c10 */ - CONST_BITS-PASS1_BITS); - dataptr[6] = (DCTELEM) - DESCALE(tmp10 - MULTIPLY(tmp14, FIX(0.211164243)) /* c2-c6 */ - - MULTIPLY(tmp17, FIX(1.061594338)), /* c10+c14 */ - CONST_BITS-PASS1_BITS); - - /* Odd part */ - - tmp11 = MULTIPLY(tmp0 + tmp1, FIX(1.353318001)) + /* c3 */ - MULTIPLY(tmp6 - tmp7, FIX(0.410524528)); /* c13 */ - tmp12 = MULTIPLY(tmp0 + tmp2, FIX(1.247225013)) + /* c5 */ - MULTIPLY(tmp5 + tmp7, FIX(0.666655658)); /* c11 */ - tmp13 = MULTIPLY(tmp0 + tmp3, FIX(1.093201867)) + /* c7 */ - MULTIPLY(tmp4 - tmp7, FIX(0.897167586)); /* c9 */ - tmp14 = MULTIPLY(tmp1 + tmp2, FIX(0.138617169)) + /* c15 */ - MULTIPLY(tmp6 - tmp5, FIX(1.407403738)); /* c1 */ - tmp15 = MULTIPLY(tmp1 + tmp3, - FIX(0.666655658)) + /* -c11 */ - MULTIPLY(tmp4 + tmp6, - FIX(1.247225013)); /* -c5 */ - tmp16 = MULTIPLY(tmp2 + tmp3, - FIX(1.353318001)) + /* -c3 */ - MULTIPLY(tmp5 - tmp4, FIX(0.410524528)); /* c13 */ - tmp10 = tmp11 + tmp12 + tmp13 - - MULTIPLY(tmp0, FIX(2.286341144)) + /* c7+c5+c3-c1 */ - MULTIPLY(tmp7, FIX(0.779653625)); /* c15+c13-c11+c9 */ - tmp11 += tmp14 + tmp15 + MULTIPLY(tmp1, FIX(0.071888074)) /* c9-c3-c15+c11 */ - - MULTIPLY(tmp6, FIX(1.663905119)); /* c7+c13+c1-c5 */ - tmp12 += tmp14 + tmp16 - MULTIPLY(tmp2, FIX(1.125726048)) /* c7+c5+c15-c3 */ - + MULTIPLY(tmp5, FIX(1.227391138)); /* c9-c11+c1-c13 */ - tmp13 += tmp15 + tmp16 + MULTIPLY(tmp3, FIX(1.065388962)) /* c15+c3+c11-c7 */ - + MULTIPLY(tmp4, FIX(2.167985692)); /* c1+c13+c5-c9 */ - - dataptr[1] = (DCTELEM) DESCALE(tmp10, CONST_BITS-PASS1_BITS); - dataptr[3] = (DCTELEM) DESCALE(tmp11, CONST_BITS-PASS1_BITS); - dataptr[5] = (DCTELEM) DESCALE(tmp12, CONST_BITS-PASS1_BITS); - dataptr[7] = (DCTELEM) DESCALE(tmp13, CONST_BITS-PASS1_BITS); - - dataptr += DCTSIZE; /* advance pointer to next row */ - } - - /* Pass 2: process columns. - * We remove the PASS1_BITS scaling, but leave the results scaled up - * by an overall factor of 8. - * We must also scale the output by 8/16 = 1/2. - */ - - dataptr = data; - for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { - /* Even part per LL&M figure 1 --- note that published figure is faulty; - * rotator "sqrt(2)*c1" should be "sqrt(2)*c6". - */ - - tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*7]; - tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*6]; - tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*5]; - tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*4]; - - tmp10 = tmp0 + tmp3; - tmp12 = tmp0 - tmp3; - tmp11 = tmp1 + tmp2; - tmp13 = tmp1 - tmp2; - - tmp0 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*7]; - tmp1 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*6]; - tmp2 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*5]; - tmp3 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*4]; - - dataptr[DCTSIZE*0] = (DCTELEM) DESCALE(tmp10 + tmp11, PASS1_BITS+1); - dataptr[DCTSIZE*4] = (DCTELEM) DESCALE(tmp10 - tmp11, PASS1_BITS+1); - - z1 = MULTIPLY(tmp12 + tmp13, FIX_0_541196100); - dataptr[DCTSIZE*2] = (DCTELEM) DESCALE(z1 + MULTIPLY(tmp12, FIX_0_765366865), - CONST_BITS+PASS1_BITS+1); - dataptr[DCTSIZE*6] = (DCTELEM) DESCALE(z1 - MULTIPLY(tmp13, FIX_1_847759065), - CONST_BITS+PASS1_BITS+1); - - /* Odd part per figure 8 --- note paper omits factor of sqrt(2). - * 8-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/16). - * i0..i3 in the paper are tmp0..tmp3 here. - */ - - tmp10 = tmp0 + tmp3; - tmp11 = tmp1 + tmp2; - tmp12 = tmp0 + tmp2; - tmp13 = tmp1 + tmp3; - z1 = MULTIPLY(tmp12 + tmp13, FIX_1_175875602); /* c3 */ - - tmp0 = MULTIPLY(tmp0, FIX_1_501321110); /* c1+c3-c5-c7 */ - tmp1 = MULTIPLY(tmp1, FIX_3_072711026); /* c1+c3+c5-c7 */ - tmp2 = MULTIPLY(tmp2, FIX_2_053119869); /* c1+c3-c5+c7 */ - tmp3 = MULTIPLY(tmp3, FIX_0_298631336); /* -c1+c3+c5-c7 */ - tmp10 = MULTIPLY(tmp10, - FIX_0_899976223); /* c7-c3 */ - tmp11 = MULTIPLY(tmp11, - FIX_2_562915447); /* -c1-c3 */ - tmp12 = MULTIPLY(tmp12, - FIX_0_390180644); /* c5-c3 */ - tmp13 = MULTIPLY(tmp13, - FIX_1_961570560); /* -c3-c5 */ - - tmp12 += z1; - tmp13 += z1; - - dataptr[DCTSIZE*1] = (DCTELEM) DESCALE(tmp0 + tmp10 + tmp12, - CONST_BITS+PASS1_BITS+1); - dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp1 + tmp11 + tmp13, - CONST_BITS+PASS1_BITS+1); - dataptr[DCTSIZE*5] = (DCTELEM) DESCALE(tmp2 + tmp11 + tmp12, - CONST_BITS+PASS1_BITS+1); - dataptr[DCTSIZE*7] = (DCTELEM) DESCALE(tmp3 + tmp10 + tmp13, - CONST_BITS+PASS1_BITS+1); - - dataptr++; /* advance pointer to next column */ - } -} - - -/* - * Perform the forward DCT on a 14x7 sample block. - * - * 14-point FDCT in pass 1 (rows), 7-point in pass 2 (columns). - */ - -GLOBAL(void) -jpeg_fdct_14x7 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) -{ - INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6; - INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15, tmp16; - INT32 z1, z2, z3; - DCTELEM *dataptr; - JSAMPROW elemptr; - int ctr; - SHIFT_TEMPS - - /* Zero bottom row of output coefficient block. */ - MEMZERO(&data[DCTSIZE*7], SIZEOF(DCTELEM) * DCTSIZE); - - /* Pass 1: process rows. */ - /* Note results are scaled up by sqrt(8) compared to a true DCT; */ - /* furthermore, we scale the results by 2**PASS1_BITS. */ - /* 14-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/28). */ - - dataptr = data; - for (ctr = 0; ctr < 7; ctr++) { - elemptr = sample_data[ctr] + start_col; - - /* Even part */ - - tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[13]); - tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[12]); - tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[11]); - tmp13 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[10]); - tmp4 = GETJSAMPLE(elemptr[4]) + GETJSAMPLE(elemptr[9]); - tmp5 = GETJSAMPLE(elemptr[5]) + GETJSAMPLE(elemptr[8]); - tmp6 = GETJSAMPLE(elemptr[6]) + GETJSAMPLE(elemptr[7]); - - tmp10 = tmp0 + tmp6; - tmp14 = tmp0 - tmp6; - tmp11 = tmp1 + tmp5; - tmp15 = tmp1 - tmp5; - tmp12 = tmp2 + tmp4; - tmp16 = tmp2 - tmp4; - - tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[13]); - tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[12]); - tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[11]); - tmp3 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[10]); - tmp4 = GETJSAMPLE(elemptr[4]) - GETJSAMPLE(elemptr[9]); - tmp5 = GETJSAMPLE(elemptr[5]) - GETJSAMPLE(elemptr[8]); - tmp6 = GETJSAMPLE(elemptr[6]) - GETJSAMPLE(elemptr[7]); - - /* Apply unsigned->signed conversion */ - dataptr[0] = (DCTELEM) - ((tmp10 + tmp11 + tmp12 + tmp13 - 14 * CENTERJSAMPLE) << PASS1_BITS); - tmp13 += tmp13; - dataptr[4] = (DCTELEM) - DESCALE(MULTIPLY(tmp10 - tmp13, FIX(1.274162392)) + /* c4 */ - MULTIPLY(tmp11 - tmp13, FIX(0.314692123)) - /* c12 */ - MULTIPLY(tmp12 - tmp13, FIX(0.881747734)), /* c8 */ - CONST_BITS-PASS1_BITS); - - tmp10 = MULTIPLY(tmp14 + tmp15, FIX(1.105676686)); /* c6 */ - - dataptr[2] = (DCTELEM) - DESCALE(tmp10 + MULTIPLY(tmp14, FIX(0.273079590)) /* c2-c6 */ - + MULTIPLY(tmp16, FIX(0.613604268)), /* c10 */ - CONST_BITS-PASS1_BITS); - dataptr[6] = (DCTELEM) - DESCALE(tmp10 - MULTIPLY(tmp15, FIX(1.719280954)) /* c6+c10 */ - - MULTIPLY(tmp16, FIX(1.378756276)), /* c2 */ - CONST_BITS-PASS1_BITS); - - /* Odd part */ - - tmp10 = tmp1 + tmp2; - tmp11 = tmp5 - tmp4; - dataptr[7] = (DCTELEM) ((tmp0 - tmp10 + tmp3 - tmp11 - tmp6) << PASS1_BITS); - tmp3 <<= CONST_BITS; - tmp10 = MULTIPLY(tmp10, - FIX(0.158341681)); /* -c13 */ - tmp11 = MULTIPLY(tmp11, FIX(1.405321284)); /* c1 */ - tmp10 += tmp11 - tmp3; - tmp11 = MULTIPLY(tmp0 + tmp2, FIX(1.197448846)) + /* c5 */ - MULTIPLY(tmp4 + tmp6, FIX(0.752406978)); /* c9 */ - dataptr[5] = (DCTELEM) - DESCALE(tmp10 + tmp11 - MULTIPLY(tmp2, FIX(2.373959773)) /* c3+c5-c13 */ - + MULTIPLY(tmp4, FIX(1.119999435)), /* c1+c11-c9 */ - CONST_BITS-PASS1_BITS); - tmp12 = MULTIPLY(tmp0 + tmp1, FIX(1.334852607)) + /* c3 */ - MULTIPLY(tmp5 - tmp6, FIX(0.467085129)); /* c11 */ - dataptr[3] = (DCTELEM) - DESCALE(tmp10 + tmp12 - MULTIPLY(tmp1, FIX(0.424103948)) /* c3-c9-c13 */ - - MULTIPLY(tmp5, FIX(3.069855259)), /* c1+c5+c11 */ - CONST_BITS-PASS1_BITS); - dataptr[1] = (DCTELEM) - DESCALE(tmp11 + tmp12 + tmp3 + tmp6 - - MULTIPLY(tmp0 + tmp6, FIX(1.126980169)), /* c3+c5-c1 */ - CONST_BITS-PASS1_BITS); - - dataptr += DCTSIZE; /* advance pointer to next row */ - } - - /* Pass 2: process columns. - * We remove the PASS1_BITS scaling, but leave the results scaled up - * by an overall factor of 8. - * We must also scale the output by (8/14)*(8/7) = 32/49, which we - * partially fold into the constant multipliers and final shifting: - * 7-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/14) * 64/49. - */ - - dataptr = data; - for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { - /* Even part */ - - tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*6]; - tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*5]; - tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*4]; - tmp3 = dataptr[DCTSIZE*3]; - - tmp10 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*6]; - tmp11 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*5]; - tmp12 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*4]; - - z1 = tmp0 + tmp2; - dataptr[DCTSIZE*0] = (DCTELEM) - DESCALE(MULTIPLY(z1 + tmp1 + tmp3, FIX(1.306122449)), /* 64/49 */ - CONST_BITS+PASS1_BITS+1); - tmp3 += tmp3; - z1 -= tmp3; - z1 -= tmp3; - z1 = MULTIPLY(z1, FIX(0.461784020)); /* (c2+c6-c4)/2 */ - z2 = MULTIPLY(tmp0 - tmp2, FIX(1.202428084)); /* (c2+c4-c6)/2 */ - z3 = MULTIPLY(tmp1 - tmp2, FIX(0.411026446)); /* c6 */ - dataptr[DCTSIZE*2] = (DCTELEM) DESCALE(z1 + z2 + z3, CONST_BITS+PASS1_BITS+1); - z1 -= z2; - z2 = MULTIPLY(tmp0 - tmp1, FIX(1.151670509)); /* c4 */ - dataptr[DCTSIZE*4] = (DCTELEM) - DESCALE(z2 + z3 - MULTIPLY(tmp1 - tmp3, FIX(0.923568041)), /* c2+c6-c4 */ - CONST_BITS+PASS1_BITS+1); - dataptr[DCTSIZE*6] = (DCTELEM) DESCALE(z1 + z2, CONST_BITS+PASS1_BITS+1); - - /* Odd part */ - - tmp1 = MULTIPLY(tmp10 + tmp11, FIX(1.221765677)); /* (c3+c1-c5)/2 */ - tmp2 = MULTIPLY(tmp10 - tmp11, FIX(0.222383464)); /* (c3+c5-c1)/2 */ - tmp0 = tmp1 - tmp2; - tmp1 += tmp2; - tmp2 = MULTIPLY(tmp11 + tmp12, - FIX(1.800824523)); /* -c1 */ - tmp1 += tmp2; - tmp3 = MULTIPLY(tmp10 + tmp12, FIX(0.801442310)); /* c5 */ - tmp0 += tmp3; - tmp2 += tmp3 + MULTIPLY(tmp12, FIX(2.443531355)); /* c3+c1-c5 */ - - dataptr[DCTSIZE*1] = (DCTELEM) DESCALE(tmp0, CONST_BITS+PASS1_BITS+1); - dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp1, CONST_BITS+PASS1_BITS+1); - dataptr[DCTSIZE*5] = (DCTELEM) DESCALE(tmp2, CONST_BITS+PASS1_BITS+1); - - dataptr++; /* advance pointer to next column */ - } -} - - -/* - * Perform the forward DCT on a 12x6 sample block. - * - * 12-point FDCT in pass 1 (rows), 6-point in pass 2 (columns). - */ - -GLOBAL(void) -jpeg_fdct_12x6 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) -{ - INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5; - INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15; - DCTELEM *dataptr; - JSAMPROW elemptr; - int ctr; - SHIFT_TEMPS - - /* Zero 2 bottom rows of output coefficient block. */ - MEMZERO(&data[DCTSIZE*6], SIZEOF(DCTELEM) * DCTSIZE * 2); - - /* Pass 1: process rows. */ - /* Note results are scaled up by sqrt(8) compared to a true DCT; */ - /* furthermore, we scale the results by 2**PASS1_BITS. */ - /* 12-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/24). */ - - dataptr = data; - for (ctr = 0; ctr < 6; ctr++) { - elemptr = sample_data[ctr] + start_col; - - /* Even part */ - - tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[11]); - tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[10]); - tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[9]); - tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[8]); - tmp4 = GETJSAMPLE(elemptr[4]) + GETJSAMPLE(elemptr[7]); - tmp5 = GETJSAMPLE(elemptr[5]) + GETJSAMPLE(elemptr[6]); - - tmp10 = tmp0 + tmp5; - tmp13 = tmp0 - tmp5; - tmp11 = tmp1 + tmp4; - tmp14 = tmp1 - tmp4; - tmp12 = tmp2 + tmp3; - tmp15 = tmp2 - tmp3; - - tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[11]); - tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[10]); - tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[9]); - tmp3 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[8]); - tmp4 = GETJSAMPLE(elemptr[4]) - GETJSAMPLE(elemptr[7]); - tmp5 = GETJSAMPLE(elemptr[5]) - GETJSAMPLE(elemptr[6]); - - /* Apply unsigned->signed conversion */ - dataptr[0] = (DCTELEM) - ((tmp10 + tmp11 + tmp12 - 12 * CENTERJSAMPLE) << PASS1_BITS); - dataptr[6] = (DCTELEM) ((tmp13 - tmp14 - tmp15) << PASS1_BITS); - dataptr[4] = (DCTELEM) - DESCALE(MULTIPLY(tmp10 - tmp12, FIX(1.224744871)), /* c4 */ - CONST_BITS-PASS1_BITS); - dataptr[2] = (DCTELEM) - DESCALE(tmp14 - tmp15 + MULTIPLY(tmp13 + tmp15, FIX(1.366025404)), /* c2 */ - CONST_BITS-PASS1_BITS); - - /* Odd part */ - - tmp10 = MULTIPLY(tmp1 + tmp4, FIX_0_541196100); /* c9 */ - tmp14 = tmp10 + MULTIPLY(tmp1, FIX_0_765366865); /* c3-c9 */ - tmp15 = tmp10 - MULTIPLY(tmp4, FIX_1_847759065); /* c3+c9 */ - tmp12 = MULTIPLY(tmp0 + tmp2, FIX(1.121971054)); /* c5 */ - tmp13 = MULTIPLY(tmp0 + tmp3, FIX(0.860918669)); /* c7 */ - tmp10 = tmp12 + tmp13 + tmp14 - MULTIPLY(tmp0, FIX(0.580774953)) /* c5+c7-c1 */ - + MULTIPLY(tmp5, FIX(0.184591911)); /* c11 */ - tmp11 = MULTIPLY(tmp2 + tmp3, - FIX(0.184591911)); /* -c11 */ - tmp12 += tmp11 - tmp15 - MULTIPLY(tmp2, FIX(2.339493912)) /* c1+c5-c11 */ - + MULTIPLY(tmp5, FIX(0.860918669)); /* c7 */ - tmp13 += tmp11 - tmp14 + MULTIPLY(tmp3, FIX(0.725788011)) /* c1+c11-c7 */ - - MULTIPLY(tmp5, FIX(1.121971054)); /* c5 */ - tmp11 = tmp15 + MULTIPLY(tmp0 - tmp3, FIX(1.306562965)) /* c3 */ - - MULTIPLY(tmp2 + tmp5, FIX_0_541196100); /* c9 */ - - dataptr[1] = (DCTELEM) DESCALE(tmp10, CONST_BITS-PASS1_BITS); - dataptr[3] = (DCTELEM) DESCALE(tmp11, CONST_BITS-PASS1_BITS); - dataptr[5] = (DCTELEM) DESCALE(tmp12, CONST_BITS-PASS1_BITS); - dataptr[7] = (DCTELEM) DESCALE(tmp13, CONST_BITS-PASS1_BITS); - - dataptr += DCTSIZE; /* advance pointer to next row */ - } - - /* Pass 2: process columns. - * We remove the PASS1_BITS scaling, but leave the results scaled up - * by an overall factor of 8. - * We must also scale the output by (8/12)*(8/6) = 8/9, which we - * partially fold into the constant multipliers and final shifting: - * 6-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/12) * 16/9. - */ - - dataptr = data; - for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { - /* Even part */ - - tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*5]; - tmp11 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*4]; - tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*3]; - - tmp10 = tmp0 + tmp2; - tmp12 = tmp0 - tmp2; - - tmp0 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*5]; - tmp1 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*4]; - tmp2 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*3]; - - dataptr[DCTSIZE*0] = (DCTELEM) - DESCALE(MULTIPLY(tmp10 + tmp11, FIX(1.777777778)), /* 16/9 */ - CONST_BITS+PASS1_BITS+1); - dataptr[DCTSIZE*2] = (DCTELEM) - DESCALE(MULTIPLY(tmp12, FIX(2.177324216)), /* c2 */ - CONST_BITS+PASS1_BITS+1); - dataptr[DCTSIZE*4] = (DCTELEM) - DESCALE(MULTIPLY(tmp10 - tmp11 - tmp11, FIX(1.257078722)), /* c4 */ - CONST_BITS+PASS1_BITS+1); - - /* Odd part */ - - tmp10 = MULTIPLY(tmp0 + tmp2, FIX(0.650711829)); /* c5 */ - - dataptr[DCTSIZE*1] = (DCTELEM) - DESCALE(tmp10 + MULTIPLY(tmp0 + tmp1, FIX(1.777777778)), /* 16/9 */ - CONST_BITS+PASS1_BITS+1); - dataptr[DCTSIZE*3] = (DCTELEM) - DESCALE(MULTIPLY(tmp0 - tmp1 - tmp2, FIX(1.777777778)), /* 16/9 */ - CONST_BITS+PASS1_BITS+1); - dataptr[DCTSIZE*5] = (DCTELEM) - DESCALE(tmp10 + MULTIPLY(tmp2 - tmp1, FIX(1.777777778)), /* 16/9 */ - CONST_BITS+PASS1_BITS+1); - - dataptr++; /* advance pointer to next column */ - } -} - - -/* - * Perform the forward DCT on a 10x5 sample block. - * - * 10-point FDCT in pass 1 (rows), 5-point in pass 2 (columns). - */ - -GLOBAL(void) -jpeg_fdct_10x5 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) -{ - INT32 tmp0, tmp1, tmp2, tmp3, tmp4; - INT32 tmp10, tmp11, tmp12, tmp13, tmp14; - DCTELEM *dataptr; - JSAMPROW elemptr; - int ctr; - SHIFT_TEMPS - - /* Zero 3 bottom rows of output coefficient block. */ - MEMZERO(&data[DCTSIZE*5], SIZEOF(DCTELEM) * DCTSIZE * 3); - - /* Pass 1: process rows. */ - /* Note results are scaled up by sqrt(8) compared to a true DCT; */ - /* furthermore, we scale the results by 2**PASS1_BITS. */ - /* 10-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/20). */ - - dataptr = data; - for (ctr = 0; ctr < 5; ctr++) { - elemptr = sample_data[ctr] + start_col; - - /* Even part */ - - tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[9]); - tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[8]); - tmp12 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[7]); - tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[6]); - tmp4 = GETJSAMPLE(elemptr[4]) + GETJSAMPLE(elemptr[5]); - - tmp10 = tmp0 + tmp4; - tmp13 = tmp0 - tmp4; - tmp11 = tmp1 + tmp3; - tmp14 = tmp1 - tmp3; - - tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[9]); - tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[8]); - tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[7]); - tmp3 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[6]); - tmp4 = GETJSAMPLE(elemptr[4]) - GETJSAMPLE(elemptr[5]); - - /* Apply unsigned->signed conversion */ - dataptr[0] = (DCTELEM) - ((tmp10 + tmp11 + tmp12 - 10 * CENTERJSAMPLE) << PASS1_BITS); - tmp12 += tmp12; - dataptr[4] = (DCTELEM) - DESCALE(MULTIPLY(tmp10 - tmp12, FIX(1.144122806)) - /* c4 */ - MULTIPLY(tmp11 - tmp12, FIX(0.437016024)), /* c8 */ - CONST_BITS-PASS1_BITS); - tmp10 = MULTIPLY(tmp13 + tmp14, FIX(0.831253876)); /* c6 */ - dataptr[2] = (DCTELEM) - DESCALE(tmp10 + MULTIPLY(tmp13, FIX(0.513743148)), /* c2-c6 */ - CONST_BITS-PASS1_BITS); - dataptr[6] = (DCTELEM) - DESCALE(tmp10 - MULTIPLY(tmp14, FIX(2.176250899)), /* c2+c6 */ - CONST_BITS-PASS1_BITS); - - /* Odd part */ - - tmp10 = tmp0 + tmp4; - tmp11 = tmp1 - tmp3; - dataptr[5] = (DCTELEM) ((tmp10 - tmp11 - tmp2) << PASS1_BITS); - tmp2 <<= CONST_BITS; - dataptr[1] = (DCTELEM) - DESCALE(MULTIPLY(tmp0, FIX(1.396802247)) + /* c1 */ - MULTIPLY(tmp1, FIX(1.260073511)) + tmp2 + /* c3 */ - MULTIPLY(tmp3, FIX(0.642039522)) + /* c7 */ - MULTIPLY(tmp4, FIX(0.221231742)), /* c9 */ - CONST_BITS-PASS1_BITS); - tmp12 = MULTIPLY(tmp0 - tmp4, FIX(0.951056516)) - /* (c3+c7)/2 */ - MULTIPLY(tmp1 + tmp3, FIX(0.587785252)); /* (c1-c9)/2 */ - tmp13 = MULTIPLY(tmp10 + tmp11, FIX(0.309016994)) + /* (c3-c7)/2 */ - (tmp11 << (CONST_BITS - 1)) - tmp2; - dataptr[3] = (DCTELEM) DESCALE(tmp12 + tmp13, CONST_BITS-PASS1_BITS); - dataptr[7] = (DCTELEM) DESCALE(tmp12 - tmp13, CONST_BITS-PASS1_BITS); - - dataptr += DCTSIZE; /* advance pointer to next row */ - } - - /* Pass 2: process columns. - * We remove the PASS1_BITS scaling, but leave the results scaled up - * by an overall factor of 8. - * We must also scale the output by (8/10)*(8/5) = 32/25, which we - * fold into the constant multipliers: - * 5-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/10) * 32/25. - */ - - dataptr = data; - for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { - /* Even part */ - - tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*4]; - tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*3]; - tmp2 = dataptr[DCTSIZE*2]; - - tmp10 = tmp0 + tmp1; - tmp11 = tmp0 - tmp1; - - tmp0 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*4]; - tmp1 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*3]; - - dataptr[DCTSIZE*0] = (DCTELEM) - DESCALE(MULTIPLY(tmp10 + tmp2, FIX(1.28)), /* 32/25 */ - CONST_BITS+PASS1_BITS); - tmp11 = MULTIPLY(tmp11, FIX(1.011928851)); /* (c2+c4)/2 */ - tmp10 -= tmp2 << 2; - tmp10 = MULTIPLY(tmp10, FIX(0.452548340)); /* (c2-c4)/2 */ - dataptr[DCTSIZE*2] = (DCTELEM) DESCALE(tmp11 + tmp10, CONST_BITS+PASS1_BITS); - dataptr[DCTSIZE*4] = (DCTELEM) DESCALE(tmp11 - tmp10, CONST_BITS+PASS1_BITS); - - /* Odd part */ - - tmp10 = MULTIPLY(tmp0 + tmp1, FIX(1.064004961)); /* c3 */ - - dataptr[DCTSIZE*1] = (DCTELEM) - DESCALE(tmp10 + MULTIPLY(tmp0, FIX(0.657591230)), /* c1-c3 */ - CONST_BITS+PASS1_BITS); - dataptr[DCTSIZE*3] = (DCTELEM) - DESCALE(tmp10 - MULTIPLY(tmp1, FIX(2.785601151)), /* c1+c3 */ - CONST_BITS+PASS1_BITS); - - dataptr++; /* advance pointer to next column */ - } -} - - -/* - * Perform the forward DCT on an 8x4 sample block. - * - * 8-point FDCT in pass 1 (rows), 4-point in pass 2 (columns). - */ - -GLOBAL(void) -jpeg_fdct_8x4 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) -{ - INT32 tmp0, tmp1, tmp2, tmp3; - INT32 tmp10, tmp11, tmp12, tmp13; - INT32 z1; - DCTELEM *dataptr; - JSAMPROW elemptr; - int ctr; - SHIFT_TEMPS - - /* Zero 4 bottom rows of output coefficient block. */ - MEMZERO(&data[DCTSIZE*4], SIZEOF(DCTELEM) * DCTSIZE * 4); - - /* Pass 1: process rows. */ - /* Note results are scaled up by sqrt(8) compared to a true DCT; */ - /* furthermore, we scale the results by 2**PASS1_BITS. */ - /* We must also scale the output by 8/4 = 2, which we add here. */ - - dataptr = data; - for (ctr = 0; ctr < 4; ctr++) { - elemptr = sample_data[ctr] + start_col; - - /* Even part per LL&M figure 1 --- note that published figure is faulty; - * rotator "sqrt(2)*c1" should be "sqrt(2)*c6". - */ - - tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[7]); - tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[6]); - tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[5]); - tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[4]); - - tmp10 = tmp0 + tmp3; - tmp12 = tmp0 - tmp3; - tmp11 = tmp1 + tmp2; - tmp13 = tmp1 - tmp2; - - tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[7]); - tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[6]); - tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[5]); - tmp3 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[4]); - - /* Apply unsigned->signed conversion */ - dataptr[0] = (DCTELEM) - ((tmp10 + tmp11 - 8 * CENTERJSAMPLE) << (PASS1_BITS+1)); - dataptr[4] = (DCTELEM) ((tmp10 - tmp11) << (PASS1_BITS+1)); - - z1 = MULTIPLY(tmp12 + tmp13, FIX_0_541196100); - /* Add fudge factor here for final descale. */ - z1 += ONE << (CONST_BITS-PASS1_BITS-2); - dataptr[2] = (DCTELEM) RIGHT_SHIFT(z1 + MULTIPLY(tmp12, FIX_0_765366865), - CONST_BITS-PASS1_BITS-1); - dataptr[6] = (DCTELEM) RIGHT_SHIFT(z1 - MULTIPLY(tmp13, FIX_1_847759065), - CONST_BITS-PASS1_BITS-1); - - /* Odd part per figure 8 --- note paper omits factor of sqrt(2). - * 8-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/16). - * i0..i3 in the paper are tmp0..tmp3 here. - */ - - tmp10 = tmp0 + tmp3; - tmp11 = tmp1 + tmp2; - tmp12 = tmp0 + tmp2; - tmp13 = tmp1 + tmp3; - z1 = MULTIPLY(tmp12 + tmp13, FIX_1_175875602); /* c3 */ - /* Add fudge factor here for final descale. */ - z1 += ONE << (CONST_BITS-PASS1_BITS-2); - - tmp0 = MULTIPLY(tmp0, FIX_1_501321110); /* c1+c3-c5-c7 */ - tmp1 = MULTIPLY(tmp1, FIX_3_072711026); /* c1+c3+c5-c7 */ - tmp2 = MULTIPLY(tmp2, FIX_2_053119869); /* c1+c3-c5+c7 */ - tmp3 = MULTIPLY(tmp3, FIX_0_298631336); /* -c1+c3+c5-c7 */ - tmp10 = MULTIPLY(tmp10, - FIX_0_899976223); /* c7-c3 */ - tmp11 = MULTIPLY(tmp11, - FIX_2_562915447); /* -c1-c3 */ - tmp12 = MULTIPLY(tmp12, - FIX_0_390180644); /* c5-c3 */ - tmp13 = MULTIPLY(tmp13, - FIX_1_961570560); /* -c3-c5 */ - - tmp12 += z1; - tmp13 += z1; - - dataptr[1] = (DCTELEM) - RIGHT_SHIFT(tmp0 + tmp10 + tmp12, CONST_BITS-PASS1_BITS-1); - dataptr[3] = (DCTELEM) - RIGHT_SHIFT(tmp1 + tmp11 + tmp13, CONST_BITS-PASS1_BITS-1); - dataptr[5] = (DCTELEM) - RIGHT_SHIFT(tmp2 + tmp11 + tmp12, CONST_BITS-PASS1_BITS-1); - dataptr[7] = (DCTELEM) - RIGHT_SHIFT(tmp3 + tmp10 + tmp13, CONST_BITS-PASS1_BITS-1); - - dataptr += DCTSIZE; /* advance pointer to next row */ - } - - /* Pass 2: process columns. - * We remove the PASS1_BITS scaling, but leave the results scaled up - * by an overall factor of 8. - * 4-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/16). - */ - - dataptr = data; - for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { - /* Even part */ - - /* Add fudge factor here for final descale. */ - tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*3] + (ONE << (PASS1_BITS-1)); - tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*2]; - - tmp10 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*3]; - tmp11 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*2]; - - dataptr[DCTSIZE*0] = (DCTELEM) RIGHT_SHIFT(tmp0 + tmp1, PASS1_BITS); - dataptr[DCTSIZE*2] = (DCTELEM) RIGHT_SHIFT(tmp0 - tmp1, PASS1_BITS); - - /* Odd part */ - - tmp0 = MULTIPLY(tmp10 + tmp11, FIX_0_541196100); /* c6 */ - /* Add fudge factor here for final descale. */ - tmp0 += ONE << (CONST_BITS+PASS1_BITS-1); - - dataptr[DCTSIZE*1] = (DCTELEM) - RIGHT_SHIFT(tmp0 + MULTIPLY(tmp10, FIX_0_765366865), /* c2-c6 */ - CONST_BITS+PASS1_BITS); - dataptr[DCTSIZE*3] = (DCTELEM) - RIGHT_SHIFT(tmp0 - MULTIPLY(tmp11, FIX_1_847759065), /* c2+c6 */ - CONST_BITS+PASS1_BITS); - - dataptr++; /* advance pointer to next column */ - } -} - - -/* - * Perform the forward DCT on a 6x3 sample block. - * - * 6-point FDCT in pass 1 (rows), 3-point in pass 2 (columns). - */ - -GLOBAL(void) -jpeg_fdct_6x3 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) -{ - INT32 tmp0, tmp1, tmp2; - INT32 tmp10, tmp11, tmp12; - DCTELEM *dataptr; - JSAMPROW elemptr; - int ctr; - SHIFT_TEMPS - - /* Pre-zero output coefficient block. */ - MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); - - /* Pass 1: process rows. */ - /* Note results are scaled up by sqrt(8) compared to a true DCT; */ - /* furthermore, we scale the results by 2**PASS1_BITS. */ - /* We scale the results further by 2 as part of output adaption */ - /* scaling for different DCT size. */ - /* 6-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/12). */ - - dataptr = data; - for (ctr = 0; ctr < 3; ctr++) { - elemptr = sample_data[ctr] + start_col; - - /* Even part */ - - tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[5]); - tmp11 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[4]); - tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[3]); - - tmp10 = tmp0 + tmp2; - tmp12 = tmp0 - tmp2; - - tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[5]); - tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[4]); - tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[3]); - - /* Apply unsigned->signed conversion */ - dataptr[0] = (DCTELEM) - ((tmp10 + tmp11 - 6 * CENTERJSAMPLE) << (PASS1_BITS+1)); - dataptr[2] = (DCTELEM) - DESCALE(MULTIPLY(tmp12, FIX(1.224744871)), /* c2 */ - CONST_BITS-PASS1_BITS-1); - dataptr[4] = (DCTELEM) - DESCALE(MULTIPLY(tmp10 - tmp11 - tmp11, FIX(0.707106781)), /* c4 */ - CONST_BITS-PASS1_BITS-1); - - /* Odd part */ - - tmp10 = DESCALE(MULTIPLY(tmp0 + tmp2, FIX(0.366025404)), /* c5 */ - CONST_BITS-PASS1_BITS-1); - - dataptr[1] = (DCTELEM) (tmp10 + ((tmp0 + tmp1) << (PASS1_BITS+1))); - dataptr[3] = (DCTELEM) ((tmp0 - tmp1 - tmp2) << (PASS1_BITS+1)); - dataptr[5] = (DCTELEM) (tmp10 + ((tmp2 - tmp1) << (PASS1_BITS+1))); - - dataptr += DCTSIZE; /* advance pointer to next row */ - } - - /* Pass 2: process columns. - * We remove the PASS1_BITS scaling, but leave the results scaled up - * by an overall factor of 8. - * We must also scale the output by (8/6)*(8/3) = 32/9, which we partially - * fold into the constant multipliers (other part was done in pass 1): - * 3-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/6) * 16/9. - */ - - dataptr = data; - for (ctr = 0; ctr < 6; ctr++) { - /* Even part */ - - tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*2]; - tmp1 = dataptr[DCTSIZE*1]; - - tmp2 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*2]; - - dataptr[DCTSIZE*0] = (DCTELEM) - DESCALE(MULTIPLY(tmp0 + tmp1, FIX(1.777777778)), /* 16/9 */ - CONST_BITS+PASS1_BITS); - dataptr[DCTSIZE*2] = (DCTELEM) - DESCALE(MULTIPLY(tmp0 - tmp1 - tmp1, FIX(1.257078722)), /* c2 */ - CONST_BITS+PASS1_BITS); - - /* Odd part */ - - dataptr[DCTSIZE*1] = (DCTELEM) - DESCALE(MULTIPLY(tmp2, FIX(2.177324216)), /* c1 */ - CONST_BITS+PASS1_BITS); - - dataptr++; /* advance pointer to next column */ - } -} - - -/* - * Perform the forward DCT on a 4x2 sample block. - * - * 4-point FDCT in pass 1 (rows), 2-point in pass 2 (columns). - */ - -GLOBAL(void) -jpeg_fdct_4x2 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) -{ - INT32 tmp0, tmp1; - INT32 tmp10, tmp11; - DCTELEM *dataptr; - JSAMPROW elemptr; - int ctr; - SHIFT_TEMPS - - /* Pre-zero output coefficient block. */ - MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); - - /* Pass 1: process rows. */ - /* Note results are scaled up by sqrt(8) compared to a true DCT; */ - /* furthermore, we scale the results by 2**PASS1_BITS. */ - /* We must also scale the output by (8/4)*(8/2) = 2**3, which we add here. */ - /* 4-point FDCT kernel, */ - /* cK represents sqrt(2) * cos(K*pi/16) [refers to 8-point FDCT]. */ - - dataptr = data; - for (ctr = 0; ctr < 2; ctr++) { - elemptr = sample_data[ctr] + start_col; - - /* Even part */ - - tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[3]); - tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[2]); - - tmp10 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[3]); - tmp11 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[2]); - - /* Apply unsigned->signed conversion */ - dataptr[0] = (DCTELEM) - ((tmp0 + tmp1 - 4 * CENTERJSAMPLE) << (PASS1_BITS+3)); - dataptr[2] = (DCTELEM) ((tmp0 - tmp1) << (PASS1_BITS+3)); - - /* Odd part */ - - tmp0 = MULTIPLY(tmp10 + tmp11, FIX_0_541196100); /* c6 */ - /* Add fudge factor here for final descale. */ - tmp0 += ONE << (CONST_BITS-PASS1_BITS-4); - - dataptr[1] = (DCTELEM) - RIGHT_SHIFT(tmp0 + MULTIPLY(tmp10, FIX_0_765366865), /* c2-c6 */ - CONST_BITS-PASS1_BITS-3); - dataptr[3] = (DCTELEM) - RIGHT_SHIFT(tmp0 - MULTIPLY(tmp11, FIX_1_847759065), /* c2+c6 */ - CONST_BITS-PASS1_BITS-3); - - dataptr += DCTSIZE; /* advance pointer to next row */ - } - - /* Pass 2: process columns. - * We remove the PASS1_BITS scaling, but leave the results scaled up - * by an overall factor of 8. - */ - - dataptr = data; - for (ctr = 0; ctr < 4; ctr++) { - /* Even part */ - - /* Add fudge factor here for final descale. */ - tmp0 = dataptr[DCTSIZE*0] + (ONE << (PASS1_BITS-1)); - tmp1 = dataptr[DCTSIZE*1]; - - dataptr[DCTSIZE*0] = (DCTELEM) RIGHT_SHIFT(tmp0 + tmp1, PASS1_BITS); - - /* Odd part */ - - dataptr[DCTSIZE*1] = (DCTELEM) RIGHT_SHIFT(tmp0 - tmp1, PASS1_BITS); - - dataptr++; /* advance pointer to next column */ - } -} - - -/* - * Perform the forward DCT on a 2x1 sample block. - * - * 2-point FDCT in pass 1 (rows), 1-point in pass 2 (columns). - */ - -GLOBAL(void) -jpeg_fdct_2x1 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) -{ - INT32 tmp0, tmp1; - JSAMPROW elemptr; - - /* Pre-zero output coefficient block. */ - MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); - - elemptr = sample_data[0] + start_col; - - tmp0 = GETJSAMPLE(elemptr[0]); - tmp1 = GETJSAMPLE(elemptr[1]); - - /* We leave the results scaled up by an overall factor of 8. - * We must also scale the output by (8/2)*(8/1) = 2**5. - */ - - /* Even part */ - /* Apply unsigned->signed conversion */ - data[0] = (DCTELEM) ((tmp0 + tmp1 - 2 * CENTERJSAMPLE) << 5); - - /* Odd part */ - data[1] = (DCTELEM) ((tmp0 - tmp1) << 5); -} - - -/* - * Perform the forward DCT on an 8x16 sample block. - * - * 8-point FDCT in pass 1 (rows), 16-point in pass 2 (columns). - */ - -GLOBAL(void) -jpeg_fdct_8x16 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) -{ - INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7; - INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15, tmp16, tmp17; - INT32 z1; - DCTELEM workspace[DCTSIZE2]; - DCTELEM *dataptr; - DCTELEM *wsptr; - JSAMPROW elemptr; - int ctr; - SHIFT_TEMPS - - /* Pass 1: process rows. */ - /* Note results are scaled up by sqrt(8) compared to a true DCT; */ - /* furthermore, we scale the results by 2**PASS1_BITS. */ - - dataptr = data; - ctr = 0; - for (;;) { - elemptr = sample_data[ctr] + start_col; - - /* Even part per LL&M figure 1 --- note that published figure is faulty; - * rotator "sqrt(2)*c1" should be "sqrt(2)*c6". - */ - - tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[7]); - tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[6]); - tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[5]); - tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[4]); - - tmp10 = tmp0 + tmp3; - tmp12 = tmp0 - tmp3; - tmp11 = tmp1 + tmp2; - tmp13 = tmp1 - tmp2; - - tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[7]); - tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[6]); - tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[5]); - tmp3 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[4]); - - /* Apply unsigned->signed conversion */ - dataptr[0] = (DCTELEM) ((tmp10 + tmp11 - 8 * CENTERJSAMPLE) << PASS1_BITS); - dataptr[4] = (DCTELEM) ((tmp10 - tmp11) << PASS1_BITS); - - z1 = MULTIPLY(tmp12 + tmp13, FIX_0_541196100); - dataptr[2] = (DCTELEM) DESCALE(z1 + MULTIPLY(tmp12, FIX_0_765366865), - CONST_BITS-PASS1_BITS); - dataptr[6] = (DCTELEM) DESCALE(z1 - MULTIPLY(tmp13, FIX_1_847759065), - CONST_BITS-PASS1_BITS); - - /* Odd part per figure 8 --- note paper omits factor of sqrt(2). - * 8-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/16). - * i0..i3 in the paper are tmp0..tmp3 here. - */ - - tmp10 = tmp0 + tmp3; - tmp11 = tmp1 + tmp2; - tmp12 = tmp0 + tmp2; - tmp13 = tmp1 + tmp3; - z1 = MULTIPLY(tmp12 + tmp13, FIX_1_175875602); /* c3 */ - - tmp0 = MULTIPLY(tmp0, FIX_1_501321110); /* c1+c3-c5-c7 */ - tmp1 = MULTIPLY(tmp1, FIX_3_072711026); /* c1+c3+c5-c7 */ - tmp2 = MULTIPLY(tmp2, FIX_2_053119869); /* c1+c3-c5+c7 */ - tmp3 = MULTIPLY(tmp3, FIX_0_298631336); /* -c1+c3+c5-c7 */ - tmp10 = MULTIPLY(tmp10, - FIX_0_899976223); /* c7-c3 */ - tmp11 = MULTIPLY(tmp11, - FIX_2_562915447); /* -c1-c3 */ - tmp12 = MULTIPLY(tmp12, - FIX_0_390180644); /* c5-c3 */ - tmp13 = MULTIPLY(tmp13, - FIX_1_961570560); /* -c3-c5 */ - - tmp12 += z1; - tmp13 += z1; - - dataptr[1] = (DCTELEM) DESCALE(tmp0 + tmp10 + tmp12, CONST_BITS-PASS1_BITS); - dataptr[3] = (DCTELEM) DESCALE(tmp1 + tmp11 + tmp13, CONST_BITS-PASS1_BITS); - dataptr[5] = (DCTELEM) DESCALE(tmp2 + tmp11 + tmp12, CONST_BITS-PASS1_BITS); - dataptr[7] = (DCTELEM) DESCALE(tmp3 + tmp10 + tmp13, CONST_BITS-PASS1_BITS); - - ctr++; - - if (ctr != DCTSIZE) { - if (ctr == DCTSIZE * 2) - break; /* Done. */ - dataptr += DCTSIZE; /* advance pointer to next row */ - } else - dataptr = workspace; /* switch pointer to extended workspace */ - } - - /* Pass 2: process columns. - * We remove the PASS1_BITS scaling, but leave the results scaled up - * by an overall factor of 8. - * We must also scale the output by 8/16 = 1/2. - * 16-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/32). - */ - - dataptr = data; - wsptr = workspace; - for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { - /* Even part */ - - tmp0 = dataptr[DCTSIZE*0] + wsptr[DCTSIZE*7]; - tmp1 = dataptr[DCTSIZE*1] + wsptr[DCTSIZE*6]; - tmp2 = dataptr[DCTSIZE*2] + wsptr[DCTSIZE*5]; - tmp3 = dataptr[DCTSIZE*3] + wsptr[DCTSIZE*4]; - tmp4 = dataptr[DCTSIZE*4] + wsptr[DCTSIZE*3]; - tmp5 = dataptr[DCTSIZE*5] + wsptr[DCTSIZE*2]; - tmp6 = dataptr[DCTSIZE*6] + wsptr[DCTSIZE*1]; - tmp7 = dataptr[DCTSIZE*7] + wsptr[DCTSIZE*0]; - - tmp10 = tmp0 + tmp7; - tmp14 = tmp0 - tmp7; - tmp11 = tmp1 + tmp6; - tmp15 = tmp1 - tmp6; - tmp12 = tmp2 + tmp5; - tmp16 = tmp2 - tmp5; - tmp13 = tmp3 + tmp4; - tmp17 = tmp3 - tmp4; - - tmp0 = dataptr[DCTSIZE*0] - wsptr[DCTSIZE*7]; - tmp1 = dataptr[DCTSIZE*1] - wsptr[DCTSIZE*6]; - tmp2 = dataptr[DCTSIZE*2] - wsptr[DCTSIZE*5]; - tmp3 = dataptr[DCTSIZE*3] - wsptr[DCTSIZE*4]; - tmp4 = dataptr[DCTSIZE*4] - wsptr[DCTSIZE*3]; - tmp5 = dataptr[DCTSIZE*5] - wsptr[DCTSIZE*2]; - tmp6 = dataptr[DCTSIZE*6] - wsptr[DCTSIZE*1]; - tmp7 = dataptr[DCTSIZE*7] - wsptr[DCTSIZE*0]; - - dataptr[DCTSIZE*0] = (DCTELEM) - DESCALE(tmp10 + tmp11 + tmp12 + tmp13, PASS1_BITS+1); - dataptr[DCTSIZE*4] = (DCTELEM) - DESCALE(MULTIPLY(tmp10 - tmp13, FIX(1.306562965)) + /* c4[16] = c2[8] */ - MULTIPLY(tmp11 - tmp12, FIX_0_541196100), /* c12[16] = c6[8] */ - CONST_BITS+PASS1_BITS+1); - - tmp10 = MULTIPLY(tmp17 - tmp15, FIX(0.275899379)) + /* c14[16] = c7[8] */ - MULTIPLY(tmp14 - tmp16, FIX(1.387039845)); /* c2[16] = c1[8] */ - - dataptr[DCTSIZE*2] = (DCTELEM) - DESCALE(tmp10 + MULTIPLY(tmp15, FIX(1.451774982)) /* c6+c14 */ - + MULTIPLY(tmp16, FIX(2.172734804)), /* c2+c10 */ - CONST_BITS+PASS1_BITS+1); - dataptr[DCTSIZE*6] = (DCTELEM) - DESCALE(tmp10 - MULTIPLY(tmp14, FIX(0.211164243)) /* c2-c6 */ - - MULTIPLY(tmp17, FIX(1.061594338)), /* c10+c14 */ - CONST_BITS+PASS1_BITS+1); - - /* Odd part */ - - tmp11 = MULTIPLY(tmp0 + tmp1, FIX(1.353318001)) + /* c3 */ - MULTIPLY(tmp6 - tmp7, FIX(0.410524528)); /* c13 */ - tmp12 = MULTIPLY(tmp0 + tmp2, FIX(1.247225013)) + /* c5 */ - MULTIPLY(tmp5 + tmp7, FIX(0.666655658)); /* c11 */ - tmp13 = MULTIPLY(tmp0 + tmp3, FIX(1.093201867)) + /* c7 */ - MULTIPLY(tmp4 - tmp7, FIX(0.897167586)); /* c9 */ - tmp14 = MULTIPLY(tmp1 + tmp2, FIX(0.138617169)) + /* c15 */ - MULTIPLY(tmp6 - tmp5, FIX(1.407403738)); /* c1 */ - tmp15 = MULTIPLY(tmp1 + tmp3, - FIX(0.666655658)) + /* -c11 */ - MULTIPLY(tmp4 + tmp6, - FIX(1.247225013)); /* -c5 */ - tmp16 = MULTIPLY(tmp2 + tmp3, - FIX(1.353318001)) + /* -c3 */ - MULTIPLY(tmp5 - tmp4, FIX(0.410524528)); /* c13 */ - tmp10 = tmp11 + tmp12 + tmp13 - - MULTIPLY(tmp0, FIX(2.286341144)) + /* c7+c5+c3-c1 */ - MULTIPLY(tmp7, FIX(0.779653625)); /* c15+c13-c11+c9 */ - tmp11 += tmp14 + tmp15 + MULTIPLY(tmp1, FIX(0.071888074)) /* c9-c3-c15+c11 */ - - MULTIPLY(tmp6, FIX(1.663905119)); /* c7+c13+c1-c5 */ - tmp12 += tmp14 + tmp16 - MULTIPLY(tmp2, FIX(1.125726048)) /* c7+c5+c15-c3 */ - + MULTIPLY(tmp5, FIX(1.227391138)); /* c9-c11+c1-c13 */ - tmp13 += tmp15 + tmp16 + MULTIPLY(tmp3, FIX(1.065388962)) /* c15+c3+c11-c7 */ - + MULTIPLY(tmp4, FIX(2.167985692)); /* c1+c13+c5-c9 */ - - dataptr[DCTSIZE*1] = (DCTELEM) DESCALE(tmp10, CONST_BITS+PASS1_BITS+1); - dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp11, CONST_BITS+PASS1_BITS+1); - dataptr[DCTSIZE*5] = (DCTELEM) DESCALE(tmp12, CONST_BITS+PASS1_BITS+1); - dataptr[DCTSIZE*7] = (DCTELEM) DESCALE(tmp13, CONST_BITS+PASS1_BITS+1); - - dataptr++; /* advance pointer to next column */ - wsptr++; /* advance pointer to next column */ - } -} - - -/* - * Perform the forward DCT on a 7x14 sample block. - * - * 7-point FDCT in pass 1 (rows), 14-point in pass 2 (columns). - */ - -GLOBAL(void) -jpeg_fdct_7x14 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) -{ - INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6; - INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15, tmp16; - INT32 z1, z2, z3; - DCTELEM workspace[8*6]; - DCTELEM *dataptr; - DCTELEM *wsptr; - JSAMPROW elemptr; - int ctr; - SHIFT_TEMPS - - /* Pre-zero output coefficient block. */ - MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); - - /* Pass 1: process rows. */ - /* Note results are scaled up by sqrt(8) compared to a true DCT; */ - /* furthermore, we scale the results by 2**PASS1_BITS. */ - /* 7-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/14). */ - - dataptr = data; - ctr = 0; - for (;;) { - elemptr = sample_data[ctr] + start_col; - - /* Even part */ - - tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[6]); - tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[5]); - tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[4]); - tmp3 = GETJSAMPLE(elemptr[3]); - - tmp10 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[6]); - tmp11 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[5]); - tmp12 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[4]); - - z1 = tmp0 + tmp2; - /* Apply unsigned->signed conversion */ - dataptr[0] = (DCTELEM) - ((z1 + tmp1 + tmp3 - 7 * CENTERJSAMPLE) << PASS1_BITS); - tmp3 += tmp3; - z1 -= tmp3; - z1 -= tmp3; - z1 = MULTIPLY(z1, FIX(0.353553391)); /* (c2+c6-c4)/2 */ - z2 = MULTIPLY(tmp0 - tmp2, FIX(0.920609002)); /* (c2+c4-c6)/2 */ - z3 = MULTIPLY(tmp1 - tmp2, FIX(0.314692123)); /* c6 */ - dataptr[2] = (DCTELEM) DESCALE(z1 + z2 + z3, CONST_BITS-PASS1_BITS); - z1 -= z2; - z2 = MULTIPLY(tmp0 - tmp1, FIX(0.881747734)); /* c4 */ - dataptr[4] = (DCTELEM) - DESCALE(z2 + z3 - MULTIPLY(tmp1 - tmp3, FIX(0.707106781)), /* c2+c6-c4 */ - CONST_BITS-PASS1_BITS); - dataptr[6] = (DCTELEM) DESCALE(z1 + z2, CONST_BITS-PASS1_BITS); - - /* Odd part */ - - tmp1 = MULTIPLY(tmp10 + tmp11, FIX(0.935414347)); /* (c3+c1-c5)/2 */ - tmp2 = MULTIPLY(tmp10 - tmp11, FIX(0.170262339)); /* (c3+c5-c1)/2 */ - tmp0 = tmp1 - tmp2; - tmp1 += tmp2; - tmp2 = MULTIPLY(tmp11 + tmp12, - FIX(1.378756276)); /* -c1 */ - tmp1 += tmp2; - tmp3 = MULTIPLY(tmp10 + tmp12, FIX(0.613604268)); /* c5 */ - tmp0 += tmp3; - tmp2 += tmp3 + MULTIPLY(tmp12, FIX(1.870828693)); /* c3+c1-c5 */ - - dataptr[1] = (DCTELEM) DESCALE(tmp0, CONST_BITS-PASS1_BITS); - dataptr[3] = (DCTELEM) DESCALE(tmp1, CONST_BITS-PASS1_BITS); - dataptr[5] = (DCTELEM) DESCALE(tmp2, CONST_BITS-PASS1_BITS); - - ctr++; - - if (ctr != DCTSIZE) { - if (ctr == 14) - break; /* Done. */ - dataptr += DCTSIZE; /* advance pointer to next row */ - } else - dataptr = workspace; /* switch pointer to extended workspace */ - } - - /* Pass 2: process columns. - * We remove the PASS1_BITS scaling, but leave the results scaled up - * by an overall factor of 8. - * We must also scale the output by (8/7)*(8/14) = 32/49, which we - * fold into the constant multipliers: - * 14-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/28) * 32/49. - */ - - dataptr = data; - wsptr = workspace; - for (ctr = 0; ctr < 7; ctr++) { - /* Even part */ - - tmp0 = dataptr[DCTSIZE*0] + wsptr[DCTSIZE*5]; - tmp1 = dataptr[DCTSIZE*1] + wsptr[DCTSIZE*4]; - tmp2 = dataptr[DCTSIZE*2] + wsptr[DCTSIZE*3]; - tmp13 = dataptr[DCTSIZE*3] + wsptr[DCTSIZE*2]; - tmp4 = dataptr[DCTSIZE*4] + wsptr[DCTSIZE*1]; - tmp5 = dataptr[DCTSIZE*5] + wsptr[DCTSIZE*0]; - tmp6 = dataptr[DCTSIZE*6] + dataptr[DCTSIZE*7]; - - tmp10 = tmp0 + tmp6; - tmp14 = tmp0 - tmp6; - tmp11 = tmp1 + tmp5; - tmp15 = tmp1 - tmp5; - tmp12 = tmp2 + tmp4; - tmp16 = tmp2 - tmp4; - - tmp0 = dataptr[DCTSIZE*0] - wsptr[DCTSIZE*5]; - tmp1 = dataptr[DCTSIZE*1] - wsptr[DCTSIZE*4]; - tmp2 = dataptr[DCTSIZE*2] - wsptr[DCTSIZE*3]; - tmp3 = dataptr[DCTSIZE*3] - wsptr[DCTSIZE*2]; - tmp4 = dataptr[DCTSIZE*4] - wsptr[DCTSIZE*1]; - tmp5 = dataptr[DCTSIZE*5] - wsptr[DCTSIZE*0]; - tmp6 = dataptr[DCTSIZE*6] - dataptr[DCTSIZE*7]; - - dataptr[DCTSIZE*0] = (DCTELEM) - DESCALE(MULTIPLY(tmp10 + tmp11 + tmp12 + tmp13, - FIX(0.653061224)), /* 32/49 */ - CONST_BITS+PASS1_BITS); - tmp13 += tmp13; - dataptr[DCTSIZE*4] = (DCTELEM) - DESCALE(MULTIPLY(tmp10 - tmp13, FIX(0.832106052)) + /* c4 */ - MULTIPLY(tmp11 - tmp13, FIX(0.205513223)) - /* c12 */ - MULTIPLY(tmp12 - tmp13, FIX(0.575835255)), /* c8 */ - CONST_BITS+PASS1_BITS); - - tmp10 = MULTIPLY(tmp14 + tmp15, FIX(0.722074570)); /* c6 */ - - dataptr[DCTSIZE*2] = (DCTELEM) - DESCALE(tmp10 + MULTIPLY(tmp14, FIX(0.178337691)) /* c2-c6 */ - + MULTIPLY(tmp16, FIX(0.400721155)), /* c10 */ - CONST_BITS+PASS1_BITS); - dataptr[DCTSIZE*6] = (DCTELEM) - DESCALE(tmp10 - MULTIPLY(tmp15, FIX(1.122795725)) /* c6+c10 */ - - MULTIPLY(tmp16, FIX(0.900412262)), /* c2 */ - CONST_BITS+PASS1_BITS); - - /* Odd part */ - - tmp10 = tmp1 + tmp2; - tmp11 = tmp5 - tmp4; - dataptr[DCTSIZE*7] = (DCTELEM) - DESCALE(MULTIPLY(tmp0 - tmp10 + tmp3 - tmp11 - tmp6, - FIX(0.653061224)), /* 32/49 */ - CONST_BITS+PASS1_BITS); - tmp3 = MULTIPLY(tmp3 , FIX(0.653061224)); /* 32/49 */ - tmp10 = MULTIPLY(tmp10, - FIX(0.103406812)); /* -c13 */ - tmp11 = MULTIPLY(tmp11, FIX(0.917760839)); /* c1 */ - tmp10 += tmp11 - tmp3; - tmp11 = MULTIPLY(tmp0 + tmp2, FIX(0.782007410)) + /* c5 */ - MULTIPLY(tmp4 + tmp6, FIX(0.491367823)); /* c9 */ - dataptr[DCTSIZE*5] = (DCTELEM) - DESCALE(tmp10 + tmp11 - MULTIPLY(tmp2, FIX(1.550341076)) /* c3+c5-c13 */ - + MULTIPLY(tmp4, FIX(0.731428202)), /* c1+c11-c9 */ - CONST_BITS+PASS1_BITS); - tmp12 = MULTIPLY(tmp0 + tmp1, FIX(0.871740478)) + /* c3 */ - MULTIPLY(tmp5 - tmp6, FIX(0.305035186)); /* c11 */ - dataptr[DCTSIZE*3] = (DCTELEM) - DESCALE(tmp10 + tmp12 - MULTIPLY(tmp1, FIX(0.276965844)) /* c3-c9-c13 */ - - MULTIPLY(tmp5, FIX(2.004803435)), /* c1+c5+c11 */ - CONST_BITS+PASS1_BITS); - dataptr[DCTSIZE*1] = (DCTELEM) - DESCALE(tmp11 + tmp12 + tmp3 - - MULTIPLY(tmp0, FIX(0.735987049)) /* c3+c5-c1 */ - - MULTIPLY(tmp6, FIX(0.082925825)), /* c9-c11-c13 */ - CONST_BITS+PASS1_BITS); - - dataptr++; /* advance pointer to next column */ - wsptr++; /* advance pointer to next column */ - } -} - - -/* - * Perform the forward DCT on a 6x12 sample block. - * - * 6-point FDCT in pass 1 (rows), 12-point in pass 2 (columns). - */ - -GLOBAL(void) -jpeg_fdct_6x12 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) -{ - INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5; - INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15; - DCTELEM workspace[8*4]; - DCTELEM *dataptr; - DCTELEM *wsptr; - JSAMPROW elemptr; - int ctr; - SHIFT_TEMPS - - /* Pre-zero output coefficient block. */ - MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); - - /* Pass 1: process rows. */ - /* Note results are scaled up by sqrt(8) compared to a true DCT; */ - /* furthermore, we scale the results by 2**PASS1_BITS. */ - /* 6-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/12). */ - - dataptr = data; - ctr = 0; - for (;;) { - elemptr = sample_data[ctr] + start_col; - - /* Even part */ - - tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[5]); - tmp11 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[4]); - tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[3]); - - tmp10 = tmp0 + tmp2; - tmp12 = tmp0 - tmp2; - - tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[5]); - tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[4]); - tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[3]); - - /* Apply unsigned->signed conversion */ - dataptr[0] = (DCTELEM) - ((tmp10 + tmp11 - 6 * CENTERJSAMPLE) << PASS1_BITS); - dataptr[2] = (DCTELEM) - DESCALE(MULTIPLY(tmp12, FIX(1.224744871)), /* c2 */ - CONST_BITS-PASS1_BITS); - dataptr[4] = (DCTELEM) - DESCALE(MULTIPLY(tmp10 - tmp11 - tmp11, FIX(0.707106781)), /* c4 */ - CONST_BITS-PASS1_BITS); - - /* Odd part */ - - tmp10 = DESCALE(MULTIPLY(tmp0 + tmp2, FIX(0.366025404)), /* c5 */ - CONST_BITS-PASS1_BITS); - - dataptr[1] = (DCTELEM) (tmp10 + ((tmp0 + tmp1) << PASS1_BITS)); - dataptr[3] = (DCTELEM) ((tmp0 - tmp1 - tmp2) << PASS1_BITS); - dataptr[5] = (DCTELEM) (tmp10 + ((tmp2 - tmp1) << PASS1_BITS)); - - ctr++; - - if (ctr != DCTSIZE) { - if (ctr == 12) - break; /* Done. */ - dataptr += DCTSIZE; /* advance pointer to next row */ - } else - dataptr = workspace; /* switch pointer to extended workspace */ - } - - /* Pass 2: process columns. - * We remove the PASS1_BITS scaling, but leave the results scaled up - * by an overall factor of 8. - * We must also scale the output by (8/6)*(8/12) = 8/9, which we - * fold into the constant multipliers: - * 12-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/24) * 8/9. - */ - - dataptr = data; - wsptr = workspace; - for (ctr = 0; ctr < 6; ctr++) { - /* Even part */ - - tmp0 = dataptr[DCTSIZE*0] + wsptr[DCTSIZE*3]; - tmp1 = dataptr[DCTSIZE*1] + wsptr[DCTSIZE*2]; - tmp2 = dataptr[DCTSIZE*2] + wsptr[DCTSIZE*1]; - tmp3 = dataptr[DCTSIZE*3] + wsptr[DCTSIZE*0]; - tmp4 = dataptr[DCTSIZE*4] + dataptr[DCTSIZE*7]; - tmp5 = dataptr[DCTSIZE*5] + dataptr[DCTSIZE*6]; - - tmp10 = tmp0 + tmp5; - tmp13 = tmp0 - tmp5; - tmp11 = tmp1 + tmp4; - tmp14 = tmp1 - tmp4; - tmp12 = tmp2 + tmp3; - tmp15 = tmp2 - tmp3; - - tmp0 = dataptr[DCTSIZE*0] - wsptr[DCTSIZE*3]; - tmp1 = dataptr[DCTSIZE*1] - wsptr[DCTSIZE*2]; - tmp2 = dataptr[DCTSIZE*2] - wsptr[DCTSIZE*1]; - tmp3 = dataptr[DCTSIZE*3] - wsptr[DCTSIZE*0]; - tmp4 = dataptr[DCTSIZE*4] - dataptr[DCTSIZE*7]; - tmp5 = dataptr[DCTSIZE*5] - dataptr[DCTSIZE*6]; - - dataptr[DCTSIZE*0] = (DCTELEM) - DESCALE(MULTIPLY(tmp10 + tmp11 + tmp12, FIX(0.888888889)), /* 8/9 */ - CONST_BITS+PASS1_BITS); - dataptr[DCTSIZE*6] = (DCTELEM) - DESCALE(MULTIPLY(tmp13 - tmp14 - tmp15, FIX(0.888888889)), /* 8/9 */ - CONST_BITS+PASS1_BITS); - dataptr[DCTSIZE*4] = (DCTELEM) - DESCALE(MULTIPLY(tmp10 - tmp12, FIX(1.088662108)), /* c4 */ - CONST_BITS+PASS1_BITS); - dataptr[DCTSIZE*2] = (DCTELEM) - DESCALE(MULTIPLY(tmp14 - tmp15, FIX(0.888888889)) + /* 8/9 */ - MULTIPLY(tmp13 + tmp15, FIX(1.214244803)), /* c2 */ - CONST_BITS+PASS1_BITS); - - /* Odd part */ - - tmp10 = MULTIPLY(tmp1 + tmp4, FIX(0.481063200)); /* c9 */ - tmp14 = tmp10 + MULTIPLY(tmp1, FIX(0.680326102)); /* c3-c9 */ - tmp15 = tmp10 - MULTIPLY(tmp4, FIX(1.642452502)); /* c3+c9 */ - tmp12 = MULTIPLY(tmp0 + tmp2, FIX(0.997307603)); /* c5 */ - tmp13 = MULTIPLY(tmp0 + tmp3, FIX(0.765261039)); /* c7 */ - tmp10 = tmp12 + tmp13 + tmp14 - MULTIPLY(tmp0, FIX(0.516244403)) /* c5+c7-c1 */ - + MULTIPLY(tmp5, FIX(0.164081699)); /* c11 */ - tmp11 = MULTIPLY(tmp2 + tmp3, - FIX(0.164081699)); /* -c11 */ - tmp12 += tmp11 - tmp15 - MULTIPLY(tmp2, FIX(2.079550144)) /* c1+c5-c11 */ - + MULTIPLY(tmp5, FIX(0.765261039)); /* c7 */ - tmp13 += tmp11 - tmp14 + MULTIPLY(tmp3, FIX(0.645144899)) /* c1+c11-c7 */ - - MULTIPLY(tmp5, FIX(0.997307603)); /* c5 */ - tmp11 = tmp15 + MULTIPLY(tmp0 - tmp3, FIX(1.161389302)) /* c3 */ - - MULTIPLY(tmp2 + tmp5, FIX(0.481063200)); /* c9 */ - - dataptr[DCTSIZE*1] = (DCTELEM) DESCALE(tmp10, CONST_BITS+PASS1_BITS); - dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp11, CONST_BITS+PASS1_BITS); - dataptr[DCTSIZE*5] = (DCTELEM) DESCALE(tmp12, CONST_BITS+PASS1_BITS); - dataptr[DCTSIZE*7] = (DCTELEM) DESCALE(tmp13, CONST_BITS+PASS1_BITS); - - dataptr++; /* advance pointer to next column */ - wsptr++; /* advance pointer to next column */ - } -} - - -/* - * Perform the forward DCT on a 5x10 sample block. - * - * 5-point FDCT in pass 1 (rows), 10-point in pass 2 (columns). - */ - -GLOBAL(void) -jpeg_fdct_5x10 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) -{ - INT32 tmp0, tmp1, tmp2, tmp3, tmp4; - INT32 tmp10, tmp11, tmp12, tmp13, tmp14; - DCTELEM workspace[8*2]; - DCTELEM *dataptr; - DCTELEM *wsptr; - JSAMPROW elemptr; - int ctr; - SHIFT_TEMPS - - /* Pre-zero output coefficient block. */ - MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); - - /* Pass 1: process rows. */ - /* Note results are scaled up by sqrt(8) compared to a true DCT; */ - /* furthermore, we scale the results by 2**PASS1_BITS. */ - /* 5-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/10). */ - - dataptr = data; - ctr = 0; - for (;;) { - elemptr = sample_data[ctr] + start_col; - - /* Even part */ - - tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[4]); - tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[3]); - tmp2 = GETJSAMPLE(elemptr[2]); - - tmp10 = tmp0 + tmp1; - tmp11 = tmp0 - tmp1; - - tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[4]); - tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[3]); - - /* Apply unsigned->signed conversion */ - dataptr[0] = (DCTELEM) - ((tmp10 + tmp2 - 5 * CENTERJSAMPLE) << PASS1_BITS); - tmp11 = MULTIPLY(tmp11, FIX(0.790569415)); /* (c2+c4)/2 */ - tmp10 -= tmp2 << 2; - tmp10 = MULTIPLY(tmp10, FIX(0.353553391)); /* (c2-c4)/2 */ - dataptr[2] = (DCTELEM) DESCALE(tmp11 + tmp10, CONST_BITS-PASS1_BITS); - dataptr[4] = (DCTELEM) DESCALE(tmp11 - tmp10, CONST_BITS-PASS1_BITS); - - /* Odd part */ - - tmp10 = MULTIPLY(tmp0 + tmp1, FIX(0.831253876)); /* c3 */ - - dataptr[1] = (DCTELEM) - DESCALE(tmp10 + MULTIPLY(tmp0, FIX(0.513743148)), /* c1-c3 */ - CONST_BITS-PASS1_BITS); - dataptr[3] = (DCTELEM) - DESCALE(tmp10 - MULTIPLY(tmp1, FIX(2.176250899)), /* c1+c3 */ - CONST_BITS-PASS1_BITS); - - ctr++; - - if (ctr != DCTSIZE) { - if (ctr == 10) - break; /* Done. */ - dataptr += DCTSIZE; /* advance pointer to next row */ - } else - dataptr = workspace; /* switch pointer to extended workspace */ - } - - /* Pass 2: process columns. - * We remove the PASS1_BITS scaling, but leave the results scaled up - * by an overall factor of 8. - * We must also scale the output by (8/5)*(8/10) = 32/25, which we - * fold into the constant multipliers: - * 10-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/20) * 32/25. - */ - - dataptr = data; - wsptr = workspace; - for (ctr = 0; ctr < 5; ctr++) { - /* Even part */ - - tmp0 = dataptr[DCTSIZE*0] + wsptr[DCTSIZE*1]; - tmp1 = dataptr[DCTSIZE*1] + wsptr[DCTSIZE*0]; - tmp12 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*7]; - tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*6]; - tmp4 = dataptr[DCTSIZE*4] + dataptr[DCTSIZE*5]; - - tmp10 = tmp0 + tmp4; - tmp13 = tmp0 - tmp4; - tmp11 = tmp1 + tmp3; - tmp14 = tmp1 - tmp3; - - tmp0 = dataptr[DCTSIZE*0] - wsptr[DCTSIZE*1]; - tmp1 = dataptr[DCTSIZE*1] - wsptr[DCTSIZE*0]; - tmp2 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*7]; - tmp3 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*6]; - tmp4 = dataptr[DCTSIZE*4] - dataptr[DCTSIZE*5]; - - dataptr[DCTSIZE*0] = (DCTELEM) - DESCALE(MULTIPLY(tmp10 + tmp11 + tmp12, FIX(1.28)), /* 32/25 */ - CONST_BITS+PASS1_BITS); - tmp12 += tmp12; - dataptr[DCTSIZE*4] = (DCTELEM) - DESCALE(MULTIPLY(tmp10 - tmp12, FIX(1.464477191)) - /* c4 */ - MULTIPLY(tmp11 - tmp12, FIX(0.559380511)), /* c8 */ - CONST_BITS+PASS1_BITS); - tmp10 = MULTIPLY(tmp13 + tmp14, FIX(1.064004961)); /* c6 */ - dataptr[DCTSIZE*2] = (DCTELEM) - DESCALE(tmp10 + MULTIPLY(tmp13, FIX(0.657591230)), /* c2-c6 */ - CONST_BITS+PASS1_BITS); - dataptr[DCTSIZE*6] = (DCTELEM) - DESCALE(tmp10 - MULTIPLY(tmp14, FIX(2.785601151)), /* c2+c6 */ - CONST_BITS+PASS1_BITS); - - /* Odd part */ - - tmp10 = tmp0 + tmp4; - tmp11 = tmp1 - tmp3; - dataptr[DCTSIZE*5] = (DCTELEM) - DESCALE(MULTIPLY(tmp10 - tmp11 - tmp2, FIX(1.28)), /* 32/25 */ - CONST_BITS+PASS1_BITS); - tmp2 = MULTIPLY(tmp2, FIX(1.28)); /* 32/25 */ - dataptr[DCTSIZE*1] = (DCTELEM) - DESCALE(MULTIPLY(tmp0, FIX(1.787906876)) + /* c1 */ - MULTIPLY(tmp1, FIX(1.612894094)) + tmp2 + /* c3 */ - MULTIPLY(tmp3, FIX(0.821810588)) + /* c7 */ - MULTIPLY(tmp4, FIX(0.283176630)), /* c9 */ - CONST_BITS+PASS1_BITS); - tmp12 = MULTIPLY(tmp0 - tmp4, FIX(1.217352341)) - /* (c3+c7)/2 */ - MULTIPLY(tmp1 + tmp3, FIX(0.752365123)); /* (c1-c9)/2 */ - tmp13 = MULTIPLY(tmp10 + tmp11, FIX(0.395541753)) + /* (c3-c7)/2 */ - MULTIPLY(tmp11, FIX(0.64)) - tmp2; /* 16/25 */ - dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp12 + tmp13, CONST_BITS+PASS1_BITS); - dataptr[DCTSIZE*7] = (DCTELEM) DESCALE(tmp12 - tmp13, CONST_BITS+PASS1_BITS); - - dataptr++; /* advance pointer to next column */ - wsptr++; /* advance pointer to next column */ - } -} - - -/* - * Perform the forward DCT on a 4x8 sample block. - * - * 4-point FDCT in pass 1 (rows), 8-point in pass 2 (columns). - */ - -GLOBAL(void) -jpeg_fdct_4x8 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) -{ - INT32 tmp0, tmp1, tmp2, tmp3; - INT32 tmp10, tmp11, tmp12, tmp13; - INT32 z1; - DCTELEM *dataptr; - JSAMPROW elemptr; - int ctr; - SHIFT_TEMPS - - /* Pre-zero output coefficient block. */ - MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); - - /* Pass 1: process rows. */ - /* Note results are scaled up by sqrt(8) compared to a true DCT; */ - /* furthermore, we scale the results by 2**PASS1_BITS. */ - /* We must also scale the output by 8/4 = 2, which we add here. */ - /* 4-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/16). */ - - dataptr = data; - for (ctr = 0; ctr < DCTSIZE; ctr++) { - elemptr = sample_data[ctr] + start_col; - - /* Even part */ - - tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[3]); - tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[2]); - - tmp10 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[3]); - tmp11 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[2]); - - /* Apply unsigned->signed conversion */ - dataptr[0] = (DCTELEM) - ((tmp0 + tmp1 - 4 * CENTERJSAMPLE) << (PASS1_BITS+1)); - dataptr[2] = (DCTELEM) ((tmp0 - tmp1) << (PASS1_BITS+1)); - - /* Odd part */ - - tmp0 = MULTIPLY(tmp10 + tmp11, FIX_0_541196100); /* c6 */ - /* Add fudge factor here for final descale. */ - tmp0 += ONE << (CONST_BITS-PASS1_BITS-2); - - dataptr[1] = (DCTELEM) - RIGHT_SHIFT(tmp0 + MULTIPLY(tmp10, FIX_0_765366865), /* c2-c6 */ - CONST_BITS-PASS1_BITS-1); - dataptr[3] = (DCTELEM) - RIGHT_SHIFT(tmp0 - MULTIPLY(tmp11, FIX_1_847759065), /* c2+c6 */ - CONST_BITS-PASS1_BITS-1); - - dataptr += DCTSIZE; /* advance pointer to next row */ - } - - /* Pass 2: process columns. - * We remove the PASS1_BITS scaling, but leave the results scaled up - * by an overall factor of 8. - */ - - dataptr = data; - for (ctr = 0; ctr < 4; ctr++) { - /* Even part per LL&M figure 1 --- note that published figure is faulty; - * rotator "sqrt(2)*c1" should be "sqrt(2)*c6". - */ - - tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*7]; - tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*6]; - tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*5]; - tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*4]; - - /* Add fudge factor here for final descale. */ - tmp10 = tmp0 + tmp3 + (ONE << (PASS1_BITS-1)); - tmp12 = tmp0 - tmp3; - tmp11 = tmp1 + tmp2; - tmp13 = tmp1 - tmp2; - - tmp0 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*7]; - tmp1 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*6]; - tmp2 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*5]; - tmp3 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*4]; - - dataptr[DCTSIZE*0] = (DCTELEM) RIGHT_SHIFT(tmp10 + tmp11, PASS1_BITS); - dataptr[DCTSIZE*4] = (DCTELEM) RIGHT_SHIFT(tmp10 - tmp11, PASS1_BITS); - - z1 = MULTIPLY(tmp12 + tmp13, FIX_0_541196100); - /* Add fudge factor here for final descale. */ - z1 += ONE << (CONST_BITS+PASS1_BITS-1); - dataptr[DCTSIZE*2] = (DCTELEM) - RIGHT_SHIFT(z1 + MULTIPLY(tmp12, FIX_0_765366865), CONST_BITS+PASS1_BITS); - dataptr[DCTSIZE*6] = (DCTELEM) - RIGHT_SHIFT(z1 - MULTIPLY(tmp13, FIX_1_847759065), CONST_BITS+PASS1_BITS); - - /* Odd part per figure 8 --- note paper omits factor of sqrt(2). - * 8-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/16). - * i0..i3 in the paper are tmp0..tmp3 here. - */ - - tmp10 = tmp0 + tmp3; - tmp11 = tmp1 + tmp2; - tmp12 = tmp0 + tmp2; - tmp13 = tmp1 + tmp3; - z1 = MULTIPLY(tmp12 + tmp13, FIX_1_175875602); /* c3 */ - /* Add fudge factor here for final descale. */ - z1 += ONE << (CONST_BITS+PASS1_BITS-1); - - tmp0 = MULTIPLY(tmp0, FIX_1_501321110); /* c1+c3-c5-c7 */ - tmp1 = MULTIPLY(tmp1, FIX_3_072711026); /* c1+c3+c5-c7 */ - tmp2 = MULTIPLY(tmp2, FIX_2_053119869); /* c1+c3-c5+c7 */ - tmp3 = MULTIPLY(tmp3, FIX_0_298631336); /* -c1+c3+c5-c7 */ - tmp10 = MULTIPLY(tmp10, - FIX_0_899976223); /* c7-c3 */ - tmp11 = MULTIPLY(tmp11, - FIX_2_562915447); /* -c1-c3 */ - tmp12 = MULTIPLY(tmp12, - FIX_0_390180644); /* c5-c3 */ - tmp13 = MULTIPLY(tmp13, - FIX_1_961570560); /* -c3-c5 */ - - tmp12 += z1; - tmp13 += z1; - - dataptr[DCTSIZE*1] = (DCTELEM) - RIGHT_SHIFT(tmp0 + tmp10 + tmp12, CONST_BITS+PASS1_BITS); - dataptr[DCTSIZE*3] = (DCTELEM) - RIGHT_SHIFT(tmp1 + tmp11 + tmp13, CONST_BITS+PASS1_BITS); - dataptr[DCTSIZE*5] = (DCTELEM) - RIGHT_SHIFT(tmp2 + tmp11 + tmp12, CONST_BITS+PASS1_BITS); - dataptr[DCTSIZE*7] = (DCTELEM) - RIGHT_SHIFT(tmp3 + tmp10 + tmp13, CONST_BITS+PASS1_BITS); - - dataptr++; /* advance pointer to next column */ - } -} - - -/* - * Perform the forward DCT on a 3x6 sample block. - * - * 3-point FDCT in pass 1 (rows), 6-point in pass 2 (columns). - */ - -GLOBAL(void) -jpeg_fdct_3x6 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) -{ - INT32 tmp0, tmp1, tmp2; - INT32 tmp10, tmp11, tmp12; - DCTELEM *dataptr; - JSAMPROW elemptr; - int ctr; - SHIFT_TEMPS - - /* Pre-zero output coefficient block. */ - MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); - - /* Pass 1: process rows. */ - /* Note results are scaled up by sqrt(8) compared to a true DCT; */ - /* furthermore, we scale the results by 2**PASS1_BITS. */ - /* We scale the results further by 2 as part of output adaption */ - /* scaling for different DCT size. */ - /* 3-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/6). */ - - dataptr = data; - for (ctr = 0; ctr < 6; ctr++) { - elemptr = sample_data[ctr] + start_col; - - /* Even part */ - - tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[2]); - tmp1 = GETJSAMPLE(elemptr[1]); - - tmp2 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[2]); - - /* Apply unsigned->signed conversion */ - dataptr[0] = (DCTELEM) - ((tmp0 + tmp1 - 3 * CENTERJSAMPLE) << (PASS1_BITS+1)); - dataptr[2] = (DCTELEM) - DESCALE(MULTIPLY(tmp0 - tmp1 - tmp1, FIX(0.707106781)), /* c2 */ - CONST_BITS-PASS1_BITS-1); - - /* Odd part */ - - dataptr[1] = (DCTELEM) - DESCALE(MULTIPLY(tmp2, FIX(1.224744871)), /* c1 */ - CONST_BITS-PASS1_BITS-1); - - dataptr += DCTSIZE; /* advance pointer to next row */ - } - - /* Pass 2: process columns. - * We remove the PASS1_BITS scaling, but leave the results scaled up - * by an overall factor of 8. - * We must also scale the output by (8/6)*(8/3) = 32/9, which we partially - * fold into the constant multipliers (other part was done in pass 1): - * 6-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/12) * 16/9. - */ - - dataptr = data; - for (ctr = 0; ctr < 3; ctr++) { - /* Even part */ - - tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*5]; - tmp11 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*4]; - tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*3]; - - tmp10 = tmp0 + tmp2; - tmp12 = tmp0 - tmp2; - - tmp0 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*5]; - tmp1 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*4]; - tmp2 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*3]; - - dataptr[DCTSIZE*0] = (DCTELEM) - DESCALE(MULTIPLY(tmp10 + tmp11, FIX(1.777777778)), /* 16/9 */ - CONST_BITS+PASS1_BITS); - dataptr[DCTSIZE*2] = (DCTELEM) - DESCALE(MULTIPLY(tmp12, FIX(2.177324216)), /* c2 */ - CONST_BITS+PASS1_BITS); - dataptr[DCTSIZE*4] = (DCTELEM) - DESCALE(MULTIPLY(tmp10 - tmp11 - tmp11, FIX(1.257078722)), /* c4 */ - CONST_BITS+PASS1_BITS); - - /* Odd part */ - - tmp10 = MULTIPLY(tmp0 + tmp2, FIX(0.650711829)); /* c5 */ - - dataptr[DCTSIZE*1] = (DCTELEM) - DESCALE(tmp10 + MULTIPLY(tmp0 + tmp1, FIX(1.777777778)), /* 16/9 */ - CONST_BITS+PASS1_BITS); - dataptr[DCTSIZE*3] = (DCTELEM) - DESCALE(MULTIPLY(tmp0 - tmp1 - tmp2, FIX(1.777777778)), /* 16/9 */ - CONST_BITS+PASS1_BITS); - dataptr[DCTSIZE*5] = (DCTELEM) - DESCALE(tmp10 + MULTIPLY(tmp2 - tmp1, FIX(1.777777778)), /* 16/9 */ - CONST_BITS+PASS1_BITS); - - dataptr++; /* advance pointer to next column */ - } -} - - -/* - * Perform the forward DCT on a 2x4 sample block. - * - * 2-point FDCT in pass 1 (rows), 4-point in pass 2 (columns). - */ - -GLOBAL(void) -jpeg_fdct_2x4 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) -{ - INT32 tmp0, tmp1; - INT32 tmp10, tmp11; - DCTELEM *dataptr; - JSAMPROW elemptr; - int ctr; - SHIFT_TEMPS - - /* Pre-zero output coefficient block. */ - MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); - - /* Pass 1: process rows. */ - /* Note results are scaled up by sqrt(8) compared to a true DCT. */ - /* We must also scale the output by (8/2)*(8/4) = 2**3, which we add here. */ - - dataptr = data; - for (ctr = 0; ctr < 4; ctr++) { - elemptr = sample_data[ctr] + start_col; - - /* Even part */ - - tmp0 = GETJSAMPLE(elemptr[0]); - tmp1 = GETJSAMPLE(elemptr[1]); - - /* Apply unsigned->signed conversion */ - dataptr[0] = (DCTELEM) ((tmp0 + tmp1 - 2 * CENTERJSAMPLE) << 3); - - /* Odd part */ - - dataptr[1] = (DCTELEM) ((tmp0 - tmp1) << 3); - - dataptr += DCTSIZE; /* advance pointer to next row */ - } - - /* Pass 2: process columns. - * We leave the results scaled up by an overall factor of 8. - * 4-point FDCT kernel, - * cK represents sqrt(2) * cos(K*pi/16) [refers to 8-point FDCT]. - */ - - dataptr = data; - for (ctr = 0; ctr < 2; ctr++) { - /* Even part */ - - tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*3]; - tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*2]; - - tmp10 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*3]; - tmp11 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*2]; - - dataptr[DCTSIZE*0] = (DCTELEM) (tmp0 + tmp1); - dataptr[DCTSIZE*2] = (DCTELEM) (tmp0 - tmp1); - - /* Odd part */ - - tmp0 = MULTIPLY(tmp10 + tmp11, FIX_0_541196100); /* c6 */ - /* Add fudge factor here for final descale. */ - tmp0 += ONE << (CONST_BITS-1); - - dataptr[DCTSIZE*1] = (DCTELEM) - RIGHT_SHIFT(tmp0 + MULTIPLY(tmp10, FIX_0_765366865), /* c2-c6 */ - CONST_BITS); - dataptr[DCTSIZE*3] = (DCTELEM) - RIGHT_SHIFT(tmp0 - MULTIPLY(tmp11, FIX_1_847759065), /* c2+c6 */ - CONST_BITS); - - dataptr++; /* advance pointer to next column */ - } -} - - -/* - * Perform the forward DCT on a 1x2 sample block. - * - * 1-point FDCT in pass 1 (rows), 2-point in pass 2 (columns). - */ - -GLOBAL(void) -jpeg_fdct_1x2 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) -{ - INT32 tmp0, tmp1; - - /* Pre-zero output coefficient block. */ - MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); - - tmp0 = GETJSAMPLE(sample_data[0][start_col]); - tmp1 = GETJSAMPLE(sample_data[1][start_col]); - - /* We leave the results scaled up by an overall factor of 8. - * We must also scale the output by (8/1)*(8/2) = 2**5. - */ - - /* Even part */ - /* Apply unsigned->signed conversion */ - data[DCTSIZE*0] = (DCTELEM) ((tmp0 + tmp1 - 2 * CENTERJSAMPLE) << 5); - - /* Odd part */ - data[DCTSIZE*1] = (DCTELEM) ((tmp0 - tmp1) << 5); -} - -#endif /* DCT_SCALING_SUPPORTED */ -#endif /* DCT_ISLOW_SUPPORTED */ diff --git a/jpeg/jidctflt.c b/jpeg/jidctflt.c deleted file mode 100755 index 23ae9d3..0000000 --- a/jpeg/jidctflt.c +++ /dev/null @@ -1,235 +0,0 @@ -/* - * jidctflt.c - * - * Copyright (C) 1994-1998, Thomas G. Lane. - * Modified 2010 by Guido Vollbeding. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains a floating-point implementation of the - * inverse DCT (Discrete Cosine Transform). In the IJG code, this routine - * must also perform dequantization of the input coefficients. - * - * This implementation should be more accurate than either of the integer - * IDCT implementations. However, it may not give the same results on all - * machines because of differences in roundoff behavior. Speed will depend - * on the hardware's floating point capacity. - * - * A 2-D IDCT can be done by 1-D IDCT on each column followed by 1-D IDCT - * on each row (or vice versa, but it's more convenient to emit a row at - * a time). Direct algorithms are also available, but they are much more - * complex and seem not to be any faster when reduced to code. - * - * This implementation is based on Arai, Agui, and Nakajima's algorithm for - * scaled DCT. Their original paper (Trans. IEICE E-71(11):1095) is in - * Japanese, but the algorithm is described in the Pennebaker & Mitchell - * JPEG textbook (see REFERENCES section in file README). The following code - * is based directly on figure 4-8 in P&M. - * While an 8-point DCT cannot be done in less than 11 multiplies, it is - * possible to arrange the computation so that many of the multiplies are - * simple scalings of the final outputs. These multiplies can then be - * folded into the multiplications or divisions by the JPEG quantization - * table entries. The AA&N method leaves only 5 multiplies and 29 adds - * to be done in the DCT itself. - * The primary disadvantage of this method is that with a fixed-point - * implementation, accuracy is lost due to imprecise representation of the - * scaled quantization values. However, that problem does not arise if - * we use floating point arithmetic. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" -#include "jdct.h" /* Private declarations for DCT subsystem */ - -#ifdef DCT_FLOAT_SUPPORTED - - -/* - * This module is specialized to the case DCTSIZE = 8. - */ - -#if DCTSIZE != 8 - Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */ -#endif - - -/* Dequantize a coefficient by multiplying it by the multiplier-table - * entry; produce a float result. - */ - -#define DEQUANTIZE(coef,quantval) (((FAST_FLOAT) (coef)) * (quantval)) - - -/* - * Perform dequantization and inverse DCT on one block of coefficients. - */ - -GLOBAL(void) -jpeg_idct_float (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, - JSAMPARRAY output_buf, JDIMENSION output_col) -{ - FAST_FLOAT tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7; - FAST_FLOAT tmp10, tmp11, tmp12, tmp13; - FAST_FLOAT z5, z10, z11, z12, z13; - JCOEFPTR inptr; - FLOAT_MULT_TYPE * quantptr; - FAST_FLOAT * wsptr; - JSAMPROW outptr; - JSAMPLE *range_limit = cinfo->sample_range_limit; - int ctr; - FAST_FLOAT workspace[DCTSIZE2]; /* buffers data between passes */ - - /* Pass 1: process columns from input, store into work array. */ - - inptr = coef_block; - quantptr = (FLOAT_MULT_TYPE *) compptr->dct_table; - wsptr = workspace; - for (ctr = DCTSIZE; ctr > 0; ctr--) { - /* Due to quantization, we will usually find that many of the input - * coefficients are zero, especially the AC terms. We can exploit this - * by short-circuiting the IDCT calculation for any column in which all - * the AC terms are zero. In that case each output is equal to the - * DC coefficient (with scale factor as needed). - * With typical images and quantization tables, half or more of the - * column DCT calculations can be simplified this way. - */ - - if (inptr[DCTSIZE*1] == 0 && inptr[DCTSIZE*2] == 0 && - inptr[DCTSIZE*3] == 0 && inptr[DCTSIZE*4] == 0 && - inptr[DCTSIZE*5] == 0 && inptr[DCTSIZE*6] == 0 && - inptr[DCTSIZE*7] == 0) { - /* AC terms all zero */ - FAST_FLOAT dcval = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); - - wsptr[DCTSIZE*0] = dcval; - wsptr[DCTSIZE*1] = dcval; - wsptr[DCTSIZE*2] = dcval; - wsptr[DCTSIZE*3] = dcval; - wsptr[DCTSIZE*4] = dcval; - wsptr[DCTSIZE*5] = dcval; - wsptr[DCTSIZE*6] = dcval; - wsptr[DCTSIZE*7] = dcval; - - inptr++; /* advance pointers to next column */ - quantptr++; - wsptr++; - continue; - } - - /* Even part */ - - tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); - tmp1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); - tmp2 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); - tmp3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); - - tmp10 = tmp0 + tmp2; /* phase 3 */ - tmp11 = tmp0 - tmp2; - - tmp13 = tmp1 + tmp3; /* phases 5-3 */ - tmp12 = (tmp1 - tmp3) * ((FAST_FLOAT) 1.414213562) - tmp13; /* 2*c4 */ - - tmp0 = tmp10 + tmp13; /* phase 2 */ - tmp3 = tmp10 - tmp13; - tmp1 = tmp11 + tmp12; - tmp2 = tmp11 - tmp12; - - /* Odd part */ - - tmp4 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); - tmp5 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); - tmp6 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); - tmp7 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); - - z13 = tmp6 + tmp5; /* phase 6 */ - z10 = tmp6 - tmp5; - z11 = tmp4 + tmp7; - z12 = tmp4 - tmp7; - - tmp7 = z11 + z13; /* phase 5 */ - tmp11 = (z11 - z13) * ((FAST_FLOAT) 1.414213562); /* 2*c4 */ - - z5 = (z10 + z12) * ((FAST_FLOAT) 1.847759065); /* 2*c2 */ - tmp10 = z5 - z12 * ((FAST_FLOAT) 1.082392200); /* 2*(c2-c6) */ - tmp12 = z5 - z10 * ((FAST_FLOAT) 2.613125930); /* 2*(c2+c6) */ - - tmp6 = tmp12 - tmp7; /* phase 2 */ - tmp5 = tmp11 - tmp6; - tmp4 = tmp10 - tmp5; - - wsptr[DCTSIZE*0] = tmp0 + tmp7; - wsptr[DCTSIZE*7] = tmp0 - tmp7; - wsptr[DCTSIZE*1] = tmp1 + tmp6; - wsptr[DCTSIZE*6] = tmp1 - tmp6; - wsptr[DCTSIZE*2] = tmp2 + tmp5; - wsptr[DCTSIZE*5] = tmp2 - tmp5; - wsptr[DCTSIZE*3] = tmp3 + tmp4; - wsptr[DCTSIZE*4] = tmp3 - tmp4; - - inptr++; /* advance pointers to next column */ - quantptr++; - wsptr++; - } - - /* Pass 2: process rows from work array, store into output array. */ - - wsptr = workspace; - for (ctr = 0; ctr < DCTSIZE; ctr++) { - outptr = output_buf[ctr] + output_col; - /* Rows of zeroes can be exploited in the same way as we did with columns. - * However, the column calculation has created many nonzero AC terms, so - * the simplification applies less often (typically 5% to 10% of the time). - * And testing floats for zero is relatively expensive, so we don't bother. - */ - - /* Even part */ - - /* Apply signed->unsigned and prepare float->int conversion */ - z5 = wsptr[0] + ((FAST_FLOAT) CENTERJSAMPLE + (FAST_FLOAT) 0.5); - tmp10 = z5 + wsptr[4]; - tmp11 = z5 - wsptr[4]; - - tmp13 = wsptr[2] + wsptr[6]; - tmp12 = (wsptr[2] - wsptr[6]) * ((FAST_FLOAT) 1.414213562) - tmp13; - - tmp0 = tmp10 + tmp13; - tmp3 = tmp10 - tmp13; - tmp1 = tmp11 + tmp12; - tmp2 = tmp11 - tmp12; - - /* Odd part */ - - z13 = wsptr[5] + wsptr[3]; - z10 = wsptr[5] - wsptr[3]; - z11 = wsptr[1] + wsptr[7]; - z12 = wsptr[1] - wsptr[7]; - - tmp7 = z11 + z13; - tmp11 = (z11 - z13) * ((FAST_FLOAT) 1.414213562); - - z5 = (z10 + z12) * ((FAST_FLOAT) 1.847759065); /* 2*c2 */ - tmp10 = z5 - z12 * ((FAST_FLOAT) 1.082392200); /* 2*(c2-c6) */ - tmp12 = z5 - z10 * ((FAST_FLOAT) 2.613125930); /* 2*(c2+c6) */ - - tmp6 = tmp12 - tmp7; - tmp5 = tmp11 - tmp6; - tmp4 = tmp10 - tmp5; - - /* Final output stage: float->int conversion and range-limit */ - - outptr[0] = range_limit[((int) (tmp0 + tmp7)) & RANGE_MASK]; - outptr[7] = range_limit[((int) (tmp0 - tmp7)) & RANGE_MASK]; - outptr[1] = range_limit[((int) (tmp1 + tmp6)) & RANGE_MASK]; - outptr[6] = range_limit[((int) (tmp1 - tmp6)) & RANGE_MASK]; - outptr[2] = range_limit[((int) (tmp2 + tmp5)) & RANGE_MASK]; - outptr[5] = range_limit[((int) (tmp2 - tmp5)) & RANGE_MASK]; - outptr[3] = range_limit[((int) (tmp3 + tmp4)) & RANGE_MASK]; - outptr[4] = range_limit[((int) (tmp3 - tmp4)) & RANGE_MASK]; - - wsptr += DCTSIZE; /* advance pointer to next row */ - } -} - -#endif /* DCT_FLOAT_SUPPORTED */ diff --git a/jpeg/jidctfst.c b/jpeg/jidctfst.c deleted file mode 100755 index dba4216..0000000 --- a/jpeg/jidctfst.c +++ /dev/null @@ -1,368 +0,0 @@ -/* - * jidctfst.c - * - * Copyright (C) 1994-1998, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains a fast, not so accurate integer implementation of the - * inverse DCT (Discrete Cosine Transform). In the IJG code, this routine - * must also perform dequantization of the input coefficients. - * - * A 2-D IDCT can be done by 1-D IDCT on each column followed by 1-D IDCT - * on each row (or vice versa, but it's more convenient to emit a row at - * a time). Direct algorithms are also available, but they are much more - * complex and seem not to be any faster when reduced to code. - * - * This implementation is based on Arai, Agui, and Nakajima's algorithm for - * scaled DCT. Their original paper (Trans. IEICE E-71(11):1095) is in - * Japanese, but the algorithm is described in the Pennebaker & Mitchell - * JPEG textbook (see REFERENCES section in file README). The following code - * is based directly on figure 4-8 in P&M. - * While an 8-point DCT cannot be done in less than 11 multiplies, it is - * possible to arrange the computation so that many of the multiplies are - * simple scalings of the final outputs. These multiplies can then be - * folded into the multiplications or divisions by the JPEG quantization - * table entries. The AA&N method leaves only 5 multiplies and 29 adds - * to be done in the DCT itself. - * The primary disadvantage of this method is that with fixed-point math, - * accuracy is lost due to imprecise representation of the scaled - * quantization values. The smaller the quantization table entry, the less - * precise the scaled value, so this implementation does worse with high- - * quality-setting files than with low-quality ones. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" -#include "jdct.h" /* Private declarations for DCT subsystem */ - -#ifdef DCT_IFAST_SUPPORTED - - -/* - * This module is specialized to the case DCTSIZE = 8. - */ - -#if DCTSIZE != 8 - Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */ -#endif - - -/* Scaling decisions are generally the same as in the LL&M algorithm; - * see jidctint.c for more details. However, we choose to descale - * (right shift) multiplication products as soon as they are formed, - * rather than carrying additional fractional bits into subsequent additions. - * This compromises accuracy slightly, but it lets us save a few shifts. - * More importantly, 16-bit arithmetic is then adequate (for 8-bit samples) - * everywhere except in the multiplications proper; this saves a good deal - * of work on 16-bit-int machines. - * - * The dequantized coefficients are not integers because the AA&N scaling - * factors have been incorporated. We represent them scaled up by PASS1_BITS, - * so that the first and second IDCT rounds have the same input scaling. - * For 8-bit JSAMPLEs, we choose IFAST_SCALE_BITS = PASS1_BITS so as to - * avoid a descaling shift; this compromises accuracy rather drastically - * for small quantization table entries, but it saves a lot of shifts. - * For 12-bit JSAMPLEs, there's no hope of using 16x16 multiplies anyway, - * so we use a much larger scaling factor to preserve accuracy. - * - * A final compromise is to represent the multiplicative constants to only - * 8 fractional bits, rather than 13. This saves some shifting work on some - * machines, and may also reduce the cost of multiplication (since there - * are fewer one-bits in the constants). - */ - -#if BITS_IN_JSAMPLE == 8 -#define CONST_BITS 8 -#define PASS1_BITS 2 -#else -#define CONST_BITS 8 -#define PASS1_BITS 1 /* lose a little precision to avoid overflow */ -#endif - -/* Some C compilers fail to reduce "FIX(constant)" at compile time, thus - * causing a lot of useless floating-point operations at run time. - * To get around this we use the following pre-calculated constants. - * If you change CONST_BITS you may want to add appropriate values. - * (With a reasonable C compiler, you can just rely on the FIX() macro...) - */ - -#if CONST_BITS == 8 -#define FIX_1_082392200 ((INT32) 277) /* FIX(1.082392200) */ -#define FIX_1_414213562 ((INT32) 362) /* FIX(1.414213562) */ -#define FIX_1_847759065 ((INT32) 473) /* FIX(1.847759065) */ -#define FIX_2_613125930 ((INT32) 669) /* FIX(2.613125930) */ -#else -#define FIX_1_082392200 FIX(1.082392200) -#define FIX_1_414213562 FIX(1.414213562) -#define FIX_1_847759065 FIX(1.847759065) -#define FIX_2_613125930 FIX(2.613125930) -#endif - - -/* We can gain a little more speed, with a further compromise in accuracy, - * by omitting the addition in a descaling shift. This yields an incorrectly - * rounded result half the time... - */ - -#ifndef USE_ACCURATE_ROUNDING -#undef DESCALE -#define DESCALE(x,n) RIGHT_SHIFT(x, n) -#endif - - -/* Multiply a DCTELEM variable by an INT32 constant, and immediately - * descale to yield a DCTELEM result. - */ - -#define MULTIPLY(var,const) ((DCTELEM) DESCALE((var) * (const), CONST_BITS)) - - -/* Dequantize a coefficient by multiplying it by the multiplier-table - * entry; produce a DCTELEM result. For 8-bit data a 16x16->16 - * multiplication will do. For 12-bit data, the multiplier table is - * declared INT32, so a 32-bit multiply will be used. - */ - -#if BITS_IN_JSAMPLE == 8 -#define DEQUANTIZE(coef,quantval) (((IFAST_MULT_TYPE) (coef)) * (quantval)) -#else -#define DEQUANTIZE(coef,quantval) \ - DESCALE((coef)*(quantval), IFAST_SCALE_BITS-PASS1_BITS) -#endif - - -/* Like DESCALE, but applies to a DCTELEM and produces an int. - * We assume that int right shift is unsigned if INT32 right shift is. - */ - -#ifdef RIGHT_SHIFT_IS_UNSIGNED -#define ISHIFT_TEMPS DCTELEM ishift_temp; -#if BITS_IN_JSAMPLE == 8 -#define DCTELEMBITS 16 /* DCTELEM may be 16 or 32 bits */ -#else -#define DCTELEMBITS 32 /* DCTELEM must be 32 bits */ -#endif -#define IRIGHT_SHIFT(x,shft) \ - ((ishift_temp = (x)) < 0 ? \ - (ishift_temp >> (shft)) | ((~((DCTELEM) 0)) << (DCTELEMBITS-(shft))) : \ - (ishift_temp >> (shft))) -#else -#define ISHIFT_TEMPS -#define IRIGHT_SHIFT(x,shft) ((x) >> (shft)) -#endif - -#ifdef USE_ACCURATE_ROUNDING -#define IDESCALE(x,n) ((int) IRIGHT_SHIFT((x) + (1 << ((n)-1)), n)) -#else -#define IDESCALE(x,n) ((int) IRIGHT_SHIFT(x, n)) -#endif - - -/* - * Perform dequantization and inverse DCT on one block of coefficients. - */ - -GLOBAL(void) -jpeg_idct_ifast (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, - JSAMPARRAY output_buf, JDIMENSION output_col) -{ - DCTELEM tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7; - DCTELEM tmp10, tmp11, tmp12, tmp13; - DCTELEM z5, z10, z11, z12, z13; - JCOEFPTR inptr; - IFAST_MULT_TYPE * quantptr; - int * wsptr; - JSAMPROW outptr; - JSAMPLE *range_limit = IDCT_range_limit(cinfo); - int ctr; - int workspace[DCTSIZE2]; /* buffers data between passes */ - SHIFT_TEMPS /* for DESCALE */ - ISHIFT_TEMPS /* for IDESCALE */ - - /* Pass 1: process columns from input, store into work array. */ - - inptr = coef_block; - quantptr = (IFAST_MULT_TYPE *) compptr->dct_table; - wsptr = workspace; - for (ctr = DCTSIZE; ctr > 0; ctr--) { - /* Due to quantization, we will usually find that many of the input - * coefficients are zero, especially the AC terms. We can exploit this - * by short-circuiting the IDCT calculation for any column in which all - * the AC terms are zero. In that case each output is equal to the - * DC coefficient (with scale factor as needed). - * With typical images and quantization tables, half or more of the - * column DCT calculations can be simplified this way. - */ - - if (inptr[DCTSIZE*1] == 0 && inptr[DCTSIZE*2] == 0 && - inptr[DCTSIZE*3] == 0 && inptr[DCTSIZE*4] == 0 && - inptr[DCTSIZE*5] == 0 && inptr[DCTSIZE*6] == 0 && - inptr[DCTSIZE*7] == 0) { - /* AC terms all zero */ - int dcval = (int) DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); - - wsptr[DCTSIZE*0] = dcval; - wsptr[DCTSIZE*1] = dcval; - wsptr[DCTSIZE*2] = dcval; - wsptr[DCTSIZE*3] = dcval; - wsptr[DCTSIZE*4] = dcval; - wsptr[DCTSIZE*5] = dcval; - wsptr[DCTSIZE*6] = dcval; - wsptr[DCTSIZE*7] = dcval; - - inptr++; /* advance pointers to next column */ - quantptr++; - wsptr++; - continue; - } - - /* Even part */ - - tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); - tmp1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); - tmp2 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); - tmp3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); - - tmp10 = tmp0 + tmp2; /* phase 3 */ - tmp11 = tmp0 - tmp2; - - tmp13 = tmp1 + tmp3; /* phases 5-3 */ - tmp12 = MULTIPLY(tmp1 - tmp3, FIX_1_414213562) - tmp13; /* 2*c4 */ - - tmp0 = tmp10 + tmp13; /* phase 2 */ - tmp3 = tmp10 - tmp13; - tmp1 = tmp11 + tmp12; - tmp2 = tmp11 - tmp12; - - /* Odd part */ - - tmp4 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); - tmp5 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); - tmp6 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); - tmp7 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); - - z13 = tmp6 + tmp5; /* phase 6 */ - z10 = tmp6 - tmp5; - z11 = tmp4 + tmp7; - z12 = tmp4 - tmp7; - - tmp7 = z11 + z13; /* phase 5 */ - tmp11 = MULTIPLY(z11 - z13, FIX_1_414213562); /* 2*c4 */ - - z5 = MULTIPLY(z10 + z12, FIX_1_847759065); /* 2*c2 */ - tmp10 = MULTIPLY(z12, FIX_1_082392200) - z5; /* 2*(c2-c6) */ - tmp12 = MULTIPLY(z10, - FIX_2_613125930) + z5; /* -2*(c2+c6) */ - - tmp6 = tmp12 - tmp7; /* phase 2 */ - tmp5 = tmp11 - tmp6; - tmp4 = tmp10 + tmp5; - - wsptr[DCTSIZE*0] = (int) (tmp0 + tmp7); - wsptr[DCTSIZE*7] = (int) (tmp0 - tmp7); - wsptr[DCTSIZE*1] = (int) (tmp1 + tmp6); - wsptr[DCTSIZE*6] = (int) (tmp1 - tmp6); - wsptr[DCTSIZE*2] = (int) (tmp2 + tmp5); - wsptr[DCTSIZE*5] = (int) (tmp2 - tmp5); - wsptr[DCTSIZE*4] = (int) (tmp3 + tmp4); - wsptr[DCTSIZE*3] = (int) (tmp3 - tmp4); - - inptr++; /* advance pointers to next column */ - quantptr++; - wsptr++; - } - - /* Pass 2: process rows from work array, store into output array. */ - /* Note that we must descale the results by a factor of 8 == 2**3, */ - /* and also undo the PASS1_BITS scaling. */ - - wsptr = workspace; - for (ctr = 0; ctr < DCTSIZE; ctr++) { - outptr = output_buf[ctr] + output_col; - /* Rows of zeroes can be exploited in the same way as we did with columns. - * However, the column calculation has created many nonzero AC terms, so - * the simplification applies less often (typically 5% to 10% of the time). - * On machines with very fast multiplication, it's possible that the - * test takes more time than it's worth. In that case this section - * may be commented out. - */ - -#ifndef NO_ZERO_ROW_TEST - if (wsptr[1] == 0 && wsptr[2] == 0 && wsptr[3] == 0 && wsptr[4] == 0 && - wsptr[5] == 0 && wsptr[6] == 0 && wsptr[7] == 0) { - /* AC terms all zero */ - JSAMPLE dcval = range_limit[IDESCALE(wsptr[0], PASS1_BITS+3) - & RANGE_MASK]; - - outptr[0] = dcval; - outptr[1] = dcval; - outptr[2] = dcval; - outptr[3] = dcval; - outptr[4] = dcval; - outptr[5] = dcval; - outptr[6] = dcval; - outptr[7] = dcval; - - wsptr += DCTSIZE; /* advance pointer to next row */ - continue; - } -#endif - - /* Even part */ - - tmp10 = ((DCTELEM) wsptr[0] + (DCTELEM) wsptr[4]); - tmp11 = ((DCTELEM) wsptr[0] - (DCTELEM) wsptr[4]); - - tmp13 = ((DCTELEM) wsptr[2] + (DCTELEM) wsptr[6]); - tmp12 = MULTIPLY((DCTELEM) wsptr[2] - (DCTELEM) wsptr[6], FIX_1_414213562) - - tmp13; - - tmp0 = tmp10 + tmp13; - tmp3 = tmp10 - tmp13; - tmp1 = tmp11 + tmp12; - tmp2 = tmp11 - tmp12; - - /* Odd part */ - - z13 = (DCTELEM) wsptr[5] + (DCTELEM) wsptr[3]; - z10 = (DCTELEM) wsptr[5] - (DCTELEM) wsptr[3]; - z11 = (DCTELEM) wsptr[1] + (DCTELEM) wsptr[7]; - z12 = (DCTELEM) wsptr[1] - (DCTELEM) wsptr[7]; - - tmp7 = z11 + z13; /* phase 5 */ - tmp11 = MULTIPLY(z11 - z13, FIX_1_414213562); /* 2*c4 */ - - z5 = MULTIPLY(z10 + z12, FIX_1_847759065); /* 2*c2 */ - tmp10 = MULTIPLY(z12, FIX_1_082392200) - z5; /* 2*(c2-c6) */ - tmp12 = MULTIPLY(z10, - FIX_2_613125930) + z5; /* -2*(c2+c6) */ - - tmp6 = tmp12 - tmp7; /* phase 2 */ - tmp5 = tmp11 - tmp6; - tmp4 = tmp10 + tmp5; - - /* Final output stage: scale down by a factor of 8 and range-limit */ - - outptr[0] = range_limit[IDESCALE(tmp0 + tmp7, PASS1_BITS+3) - & RANGE_MASK]; - outptr[7] = range_limit[IDESCALE(tmp0 - tmp7, PASS1_BITS+3) - & RANGE_MASK]; - outptr[1] = range_limit[IDESCALE(tmp1 + tmp6, PASS1_BITS+3) - & RANGE_MASK]; - outptr[6] = range_limit[IDESCALE(tmp1 - tmp6, PASS1_BITS+3) - & RANGE_MASK]; - outptr[2] = range_limit[IDESCALE(tmp2 + tmp5, PASS1_BITS+3) - & RANGE_MASK]; - outptr[5] = range_limit[IDESCALE(tmp2 - tmp5, PASS1_BITS+3) - & RANGE_MASK]; - outptr[4] = range_limit[IDESCALE(tmp3 + tmp4, PASS1_BITS+3) - & RANGE_MASK]; - outptr[3] = range_limit[IDESCALE(tmp3 - tmp4, PASS1_BITS+3) - & RANGE_MASK]; - - wsptr += DCTSIZE; /* advance pointer to next row */ - } -} - -#endif /* DCT_IFAST_SUPPORTED */ diff --git a/jpeg/jidctint.c b/jpeg/jidctint.c deleted file mode 100755 index dcdf7ce..0000000 --- a/jpeg/jidctint.c +++ /dev/null @@ -1,5137 +0,0 @@ -/* - * jidctint.c - * - * Copyright (C) 1991-1998, Thomas G. Lane. - * Modification developed 2002-2009 by Guido Vollbeding. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains a slow-but-accurate integer implementation of the - * inverse DCT (Discrete Cosine Transform). In the IJG code, this routine - * must also perform dequantization of the input coefficients. - * - * A 2-D IDCT can be done by 1-D IDCT on each column followed by 1-D IDCT - * on each row (or vice versa, but it's more convenient to emit a row at - * a time). Direct algorithms are also available, but they are much more - * complex and seem not to be any faster when reduced to code. - * - * This implementation is based on an algorithm described in - * C. Loeffler, A. Ligtenberg and G. Moschytz, "Practical Fast 1-D DCT - * Algorithms with 11 Multiplications", Proc. Int'l. Conf. on Acoustics, - * Speech, and Signal Processing 1989 (ICASSP '89), pp. 988-991. - * The primary algorithm described there uses 11 multiplies and 29 adds. - * We use their alternate method with 12 multiplies and 32 adds. - * The advantage of this method is that no data path contains more than one - * multiplication; this allows a very simple and accurate implementation in - * scaled fixed-point arithmetic, with a minimal number of shifts. - * - * We also provide IDCT routines with various output sample block sizes for - * direct resolution reduction or enlargement and for direct resolving the - * common 2x1 and 1x2 subsampling cases without additional resampling: NxN - * (N=1...16), 2NxN, and Nx2N (N=1...8) pixels for one 8x8 input DCT block. - * - * For N<8 we simply take the corresponding low-frequency coefficients of - * the 8x8 input DCT block and apply an NxN point IDCT on the sub-block - * to yield the downscaled outputs. - * This can be seen as direct low-pass downsampling from the DCT domain - * point of view rather than the usual spatial domain point of view, - * yielding significant computational savings and results at least - * as good as common bilinear (averaging) spatial downsampling. - * - * For N>8 we apply a partial NxN IDCT on the 8 input coefficients as - * lower frequencies and higher frequencies assumed to be zero. - * It turns out that the computational effort is similar to the 8x8 IDCT - * regarding the output size. - * Furthermore, the scaling and descaling is the same for all IDCT sizes. - * - * CAUTION: We rely on the FIX() macro except for the N=1,2,4,8 cases - * since there would be too many additional constants to pre-calculate. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" -#include "jdct.h" /* Private declarations for DCT subsystem */ - -#ifdef DCT_ISLOW_SUPPORTED - - -/* - * This module is specialized to the case DCTSIZE = 8. - */ - -#if DCTSIZE != 8 - Sorry, this code only copes with 8x8 DCT blocks. /* deliberate syntax err */ -#endif - - -/* - * The poop on this scaling stuff is as follows: - * - * Each 1-D IDCT step produces outputs which are a factor of sqrt(N) - * larger than the true IDCT outputs. The final outputs are therefore - * a factor of N larger than desired; since N=8 this can be cured by - * a simple right shift at the end of the algorithm. The advantage of - * this arrangement is that we save two multiplications per 1-D IDCT, - * because the y0 and y4 inputs need not be divided by sqrt(N). - * - * We have to do addition and subtraction of the integer inputs, which - * is no problem, and multiplication by fractional constants, which is - * a problem to do in integer arithmetic. We multiply all the constants - * by CONST_SCALE and convert them to integer constants (thus retaining - * CONST_BITS bits of precision in the constants). After doing a - * multiplication we have to divide the product by CONST_SCALE, with proper - * rounding, to produce the correct output. This division can be done - * cheaply as a right shift of CONST_BITS bits. We postpone shifting - * as long as possible so that partial sums can be added together with - * full fractional precision. - * - * The outputs of the first pass are scaled up by PASS1_BITS bits so that - * they are represented to better-than-integral precision. These outputs - * require BITS_IN_JSAMPLE + PASS1_BITS + 3 bits; this fits in a 16-bit word - * with the recommended scaling. (To scale up 12-bit sample data further, an - * intermediate INT32 array would be needed.) - * - * To avoid overflow of the 32-bit intermediate results in pass 2, we must - * have BITS_IN_JSAMPLE + CONST_BITS + PASS1_BITS <= 26. Error analysis - * shows that the values given below are the most effective. - */ - -#if BITS_IN_JSAMPLE == 8 -#define CONST_BITS 13 -#define PASS1_BITS 2 -#else -#define CONST_BITS 13 -#define PASS1_BITS 1 /* lose a little precision to avoid overflow */ -#endif - -/* Some C compilers fail to reduce "FIX(constant)" at compile time, thus - * causing a lot of useless floating-point operations at run time. - * To get around this we use the following pre-calculated constants. - * If you change CONST_BITS you may want to add appropriate values. - * (With a reasonable C compiler, you can just rely on the FIX() macro...) - */ - -#if CONST_BITS == 13 -#define FIX_0_298631336 ((INT32) 2446) /* FIX(0.298631336) */ -#define FIX_0_390180644 ((INT32) 3196) /* FIX(0.390180644) */ -#define FIX_0_541196100 ((INT32) 4433) /* FIX(0.541196100) */ -#define FIX_0_765366865 ((INT32) 6270) /* FIX(0.765366865) */ -#define FIX_0_899976223 ((INT32) 7373) /* FIX(0.899976223) */ -#define FIX_1_175875602 ((INT32) 9633) /* FIX(1.175875602) */ -#define FIX_1_501321110 ((INT32) 12299) /* FIX(1.501321110) */ -#define FIX_1_847759065 ((INT32) 15137) /* FIX(1.847759065) */ -#define FIX_1_961570560 ((INT32) 16069) /* FIX(1.961570560) */ -#define FIX_2_053119869 ((INT32) 16819) /* FIX(2.053119869) */ -#define FIX_2_562915447 ((INT32) 20995) /* FIX(2.562915447) */ -#define FIX_3_072711026 ((INT32) 25172) /* FIX(3.072711026) */ -#else -#define FIX_0_298631336 FIX(0.298631336) -#define FIX_0_390180644 FIX(0.390180644) -#define FIX_0_541196100 FIX(0.541196100) -#define FIX_0_765366865 FIX(0.765366865) -#define FIX_0_899976223 FIX(0.899976223) -#define FIX_1_175875602 FIX(1.175875602) -#define FIX_1_501321110 FIX(1.501321110) -#define FIX_1_847759065 FIX(1.847759065) -#define FIX_1_961570560 FIX(1.961570560) -#define FIX_2_053119869 FIX(2.053119869) -#define FIX_2_562915447 FIX(2.562915447) -#define FIX_3_072711026 FIX(3.072711026) -#endif - - -/* Multiply an INT32 variable by an INT32 constant to yield an INT32 result. - * For 8-bit samples with the recommended scaling, all the variable - * and constant values involved are no more than 16 bits wide, so a - * 16x16->32 bit multiply can be used instead of a full 32x32 multiply. - * For 12-bit samples, a full 32-bit multiplication will be needed. - */ - -#if BITS_IN_JSAMPLE == 8 -#define MULTIPLY(var,const) MULTIPLY16C16(var,const) -#else -#define MULTIPLY(var,const) ((var) * (const)) -#endif - - -/* Dequantize a coefficient by multiplying it by the multiplier-table - * entry; produce an int result. In this module, both inputs and result - * are 16 bits or less, so either int or short multiply will work. - */ - -#define DEQUANTIZE(coef,quantval) (((ISLOW_MULT_TYPE) (coef)) * (quantval)) - - -/* - * Perform dequantization and inverse DCT on one block of coefficients. - */ - -GLOBAL(void) -jpeg_idct_islow (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, - JSAMPARRAY output_buf, JDIMENSION output_col) -{ - INT32 tmp0, tmp1, tmp2, tmp3; - INT32 tmp10, tmp11, tmp12, tmp13; - INT32 z1, z2, z3; - JCOEFPTR inptr; - ISLOW_MULT_TYPE * quantptr; - int * wsptr; - JSAMPROW outptr; - JSAMPLE *range_limit = IDCT_range_limit(cinfo); - int ctr; - int workspace[DCTSIZE2]; /* buffers data between passes */ - SHIFT_TEMPS - - /* Pass 1: process columns from input, store into work array. */ - /* Note results are scaled up by sqrt(8) compared to a true IDCT; */ - /* furthermore, we scale the results by 2**PASS1_BITS. */ - - inptr = coef_block; - quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; - wsptr = workspace; - for (ctr = DCTSIZE; ctr > 0; ctr--) { - /* Due to quantization, we will usually find that many of the input - * coefficients are zero, especially the AC terms. We can exploit this - * by short-circuiting the IDCT calculation for any column in which all - * the AC terms are zero. In that case each output is equal to the - * DC coefficient (with scale factor as needed). - * With typical images and quantization tables, half or more of the - * column DCT calculations can be simplified this way. - */ - - if (inptr[DCTSIZE*1] == 0 && inptr[DCTSIZE*2] == 0 && - inptr[DCTSIZE*3] == 0 && inptr[DCTSIZE*4] == 0 && - inptr[DCTSIZE*5] == 0 && inptr[DCTSIZE*6] == 0 && - inptr[DCTSIZE*7] == 0) { - /* AC terms all zero */ - int dcval = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]) << PASS1_BITS; - - wsptr[DCTSIZE*0] = dcval; - wsptr[DCTSIZE*1] = dcval; - wsptr[DCTSIZE*2] = dcval; - wsptr[DCTSIZE*3] = dcval; - wsptr[DCTSIZE*4] = dcval; - wsptr[DCTSIZE*5] = dcval; - wsptr[DCTSIZE*6] = dcval; - wsptr[DCTSIZE*7] = dcval; - - inptr++; /* advance pointers to next column */ - quantptr++; - wsptr++; - continue; - } - - /* Even part: reverse the even part of the forward DCT. */ - /* The rotator is sqrt(2)*c(-6). */ - - z2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); - z3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); - - z1 = MULTIPLY(z2 + z3, FIX_0_541196100); - tmp2 = z1 + MULTIPLY(z2, FIX_0_765366865); - tmp3 = z1 - MULTIPLY(z3, FIX_1_847759065); - - z2 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); - z3 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); - z2 <<= CONST_BITS; - z3 <<= CONST_BITS; - /* Add fudge factor here for final descale. */ - z2 += ONE << (CONST_BITS-PASS1_BITS-1); - - tmp0 = z2 + z3; - tmp1 = z2 - z3; - - tmp10 = tmp0 + tmp2; - tmp13 = tmp0 - tmp2; - tmp11 = tmp1 + tmp3; - tmp12 = tmp1 - tmp3; - - /* Odd part per figure 8; the matrix is unitary and hence its - * transpose is its inverse. i0..i3 are y7,y5,y3,y1 respectively. - */ - - tmp0 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); - tmp1 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); - tmp2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); - tmp3 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); - - z2 = tmp0 + tmp2; - z3 = tmp1 + tmp3; - - z1 = MULTIPLY(z2 + z3, FIX_1_175875602); /* sqrt(2) * c3 */ - z2 = MULTIPLY(z2, - FIX_1_961570560); /* sqrt(2) * (-c3-c5) */ - z3 = MULTIPLY(z3, - FIX_0_390180644); /* sqrt(2) * (c5-c3) */ - z2 += z1; - z3 += z1; - - z1 = MULTIPLY(tmp0 + tmp3, - FIX_0_899976223); /* sqrt(2) * (c7-c3) */ - tmp0 = MULTIPLY(tmp0, FIX_0_298631336); /* sqrt(2) * (-c1+c3+c5-c7) */ - tmp3 = MULTIPLY(tmp3, FIX_1_501321110); /* sqrt(2) * ( c1+c3-c5-c7) */ - tmp0 += z1 + z2; - tmp3 += z1 + z3; - - z1 = MULTIPLY(tmp1 + tmp2, - FIX_2_562915447); /* sqrt(2) * (-c1-c3) */ - tmp1 = MULTIPLY(tmp1, FIX_2_053119869); /* sqrt(2) * ( c1+c3-c5+c7) */ - tmp2 = MULTIPLY(tmp2, FIX_3_072711026); /* sqrt(2) * ( c1+c3+c5-c7) */ - tmp1 += z1 + z3; - tmp2 += z1 + z2; - - /* Final output stage: inputs are tmp10..tmp13, tmp0..tmp3 */ - - wsptr[DCTSIZE*0] = (int) RIGHT_SHIFT(tmp10 + tmp3, CONST_BITS-PASS1_BITS); - wsptr[DCTSIZE*7] = (int) RIGHT_SHIFT(tmp10 - tmp3, CONST_BITS-PASS1_BITS); - wsptr[DCTSIZE*1] = (int) RIGHT_SHIFT(tmp11 + tmp2, CONST_BITS-PASS1_BITS); - wsptr[DCTSIZE*6] = (int) RIGHT_SHIFT(tmp11 - tmp2, CONST_BITS-PASS1_BITS); - wsptr[DCTSIZE*2] = (int) RIGHT_SHIFT(tmp12 + tmp1, CONST_BITS-PASS1_BITS); - wsptr[DCTSIZE*5] = (int) RIGHT_SHIFT(tmp12 - tmp1, CONST_BITS-PASS1_BITS); - wsptr[DCTSIZE*3] = (int) RIGHT_SHIFT(tmp13 + tmp0, CONST_BITS-PASS1_BITS); - wsptr[DCTSIZE*4] = (int) RIGHT_SHIFT(tmp13 - tmp0, CONST_BITS-PASS1_BITS); - - inptr++; /* advance pointers to next column */ - quantptr++; - wsptr++; - } - - /* Pass 2: process rows from work array, store into output array. */ - /* Note that we must descale the results by a factor of 8 == 2**3, */ - /* and also undo the PASS1_BITS scaling. */ - - wsptr = workspace; - for (ctr = 0; ctr < DCTSIZE; ctr++) { - outptr = output_buf[ctr] + output_col; - /* Rows of zeroes can be exploited in the same way as we did with columns. - * However, the column calculation has created many nonzero AC terms, so - * the simplification applies less often (typically 5% to 10% of the time). - * On machines with very fast multiplication, it's possible that the - * test takes more time than it's worth. In that case this section - * may be commented out. - */ - -#ifndef NO_ZERO_ROW_TEST - if (wsptr[1] == 0 && wsptr[2] == 0 && wsptr[3] == 0 && wsptr[4] == 0 && - wsptr[5] == 0 && wsptr[6] == 0 && wsptr[7] == 0) { - /* AC terms all zero */ - JSAMPLE dcval = range_limit[(int) DESCALE((INT32) wsptr[0], PASS1_BITS+3) - & RANGE_MASK]; - - outptr[0] = dcval; - outptr[1] = dcval; - outptr[2] = dcval; - outptr[3] = dcval; - outptr[4] = dcval; - outptr[5] = dcval; - outptr[6] = dcval; - outptr[7] = dcval; - - wsptr += DCTSIZE; /* advance pointer to next row */ - continue; - } -#endif - - /* Even part: reverse the even part of the forward DCT. */ - /* The rotator is sqrt(2)*c(-6). */ - - z2 = (INT32) wsptr[2]; - z3 = (INT32) wsptr[6]; - - z1 = MULTIPLY(z2 + z3, FIX_0_541196100); - tmp2 = z1 + MULTIPLY(z2, FIX_0_765366865); - tmp3 = z1 - MULTIPLY(z3, FIX_1_847759065); - - /* Add fudge factor here for final descale. */ - z2 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); - z3 = (INT32) wsptr[4]; - - tmp0 = (z2 + z3) << CONST_BITS; - tmp1 = (z2 - z3) << CONST_BITS; - - tmp10 = tmp0 + tmp2; - tmp13 = tmp0 - tmp2; - tmp11 = tmp1 + tmp3; - tmp12 = tmp1 - tmp3; - - /* Odd part per figure 8; the matrix is unitary and hence its - * transpose is its inverse. i0..i3 are y7,y5,y3,y1 respectively. - */ - - tmp0 = (INT32) wsptr[7]; - tmp1 = (INT32) wsptr[5]; - tmp2 = (INT32) wsptr[3]; - tmp3 = (INT32) wsptr[1]; - - z2 = tmp0 + tmp2; - z3 = tmp1 + tmp3; - - z1 = MULTIPLY(z2 + z3, FIX_1_175875602); /* sqrt(2) * c3 */ - z2 = MULTIPLY(z2, - FIX_1_961570560); /* sqrt(2) * (-c3-c5) */ - z3 = MULTIPLY(z3, - FIX_0_390180644); /* sqrt(2) * (c5-c3) */ - z2 += z1; - z3 += z1; - - z1 = MULTIPLY(tmp0 + tmp3, - FIX_0_899976223); /* sqrt(2) * (c7-c3) */ - tmp0 = MULTIPLY(tmp0, FIX_0_298631336); /* sqrt(2) * (-c1+c3+c5-c7) */ - tmp3 = MULTIPLY(tmp3, FIX_1_501321110); /* sqrt(2) * ( c1+c3-c5-c7) */ - tmp0 += z1 + z2; - tmp3 += z1 + z3; - - z1 = MULTIPLY(tmp1 + tmp2, - FIX_2_562915447); /* sqrt(2) * (-c1-c3) */ - tmp1 = MULTIPLY(tmp1, FIX_2_053119869); /* sqrt(2) * ( c1+c3-c5+c7) */ - tmp2 = MULTIPLY(tmp2, FIX_3_072711026); /* sqrt(2) * ( c1+c3+c5-c7) */ - tmp1 += z1 + z3; - tmp2 += z1 + z2; - - /* Final output stage: inputs are tmp10..tmp13, tmp0..tmp3 */ - - outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp3, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp3, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp11 + tmp2, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp11 - tmp2, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp12 + tmp1, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp12 - tmp1, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp13 + tmp0, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp13 - tmp0, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - - wsptr += DCTSIZE; /* advance pointer to next row */ - } -} - -#ifdef IDCT_SCALING_SUPPORTED - - -/* - * Perform dequantization and inverse DCT on one block of coefficients, - * producing a 7x7 output block. - * - * Optimized algorithm with 12 multiplications in the 1-D kernel. - * cK represents sqrt(2) * cos(K*pi/14). - */ - -GLOBAL(void) -jpeg_idct_7x7 (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, - JSAMPARRAY output_buf, JDIMENSION output_col) -{ - INT32 tmp0, tmp1, tmp2, tmp10, tmp11, tmp12, tmp13; - INT32 z1, z2, z3; - JCOEFPTR inptr; - ISLOW_MULT_TYPE * quantptr; - int * wsptr; - JSAMPROW outptr; - JSAMPLE *range_limit = IDCT_range_limit(cinfo); - int ctr; - int workspace[7*7]; /* buffers data between passes */ - SHIFT_TEMPS - - /* Pass 1: process columns from input, store into work array. */ - - inptr = coef_block; - quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; - wsptr = workspace; - for (ctr = 0; ctr < 7; ctr++, inptr++, quantptr++, wsptr++) { - /* Even part */ - - tmp13 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); - tmp13 <<= CONST_BITS; - /* Add fudge factor here for final descale. */ - tmp13 += ONE << (CONST_BITS-PASS1_BITS-1); - - z1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); - z2 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); - z3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); - - tmp10 = MULTIPLY(z2 - z3, FIX(0.881747734)); /* c4 */ - tmp12 = MULTIPLY(z1 - z2, FIX(0.314692123)); /* c6 */ - tmp11 = tmp10 + tmp12 + tmp13 - MULTIPLY(z2, FIX(1.841218003)); /* c2+c4-c6 */ - tmp0 = z1 + z3; - z2 -= tmp0; - tmp0 = MULTIPLY(tmp0, FIX(1.274162392)) + tmp13; /* c2 */ - tmp10 += tmp0 - MULTIPLY(z3, FIX(0.077722536)); /* c2-c4-c6 */ - tmp12 += tmp0 - MULTIPLY(z1, FIX(2.470602249)); /* c2+c4+c6 */ - tmp13 += MULTIPLY(z2, FIX(1.414213562)); /* c0 */ - - /* Odd part */ - - z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); - z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); - z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); - - tmp1 = MULTIPLY(z1 + z2, FIX(0.935414347)); /* (c3+c1-c5)/2 */ - tmp2 = MULTIPLY(z1 - z2, FIX(0.170262339)); /* (c3+c5-c1)/2 */ - tmp0 = tmp1 - tmp2; - tmp1 += tmp2; - tmp2 = MULTIPLY(z2 + z3, - FIX(1.378756276)); /* -c1 */ - tmp1 += tmp2; - z2 = MULTIPLY(z1 + z3, FIX(0.613604268)); /* c5 */ - tmp0 += z2; - tmp2 += z2 + MULTIPLY(z3, FIX(1.870828693)); /* c3+c1-c5 */ - - /* Final output stage */ - - wsptr[7*0] = (int) RIGHT_SHIFT(tmp10 + tmp0, CONST_BITS-PASS1_BITS); - wsptr[7*6] = (int) RIGHT_SHIFT(tmp10 - tmp0, CONST_BITS-PASS1_BITS); - wsptr[7*1] = (int) RIGHT_SHIFT(tmp11 + tmp1, CONST_BITS-PASS1_BITS); - wsptr[7*5] = (int) RIGHT_SHIFT(tmp11 - tmp1, CONST_BITS-PASS1_BITS); - wsptr[7*2] = (int) RIGHT_SHIFT(tmp12 + tmp2, CONST_BITS-PASS1_BITS); - wsptr[7*4] = (int) RIGHT_SHIFT(tmp12 - tmp2, CONST_BITS-PASS1_BITS); - wsptr[7*3] = (int) RIGHT_SHIFT(tmp13, CONST_BITS-PASS1_BITS); - } - - /* Pass 2: process 7 rows from work array, store into output array. */ - - wsptr = workspace; - for (ctr = 0; ctr < 7; ctr++) { - outptr = output_buf[ctr] + output_col; - - /* Even part */ - - /* Add fudge factor here for final descale. */ - tmp13 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); - tmp13 <<= CONST_BITS; - - z1 = (INT32) wsptr[2]; - z2 = (INT32) wsptr[4]; - z3 = (INT32) wsptr[6]; - - tmp10 = MULTIPLY(z2 - z3, FIX(0.881747734)); /* c4 */ - tmp12 = MULTIPLY(z1 - z2, FIX(0.314692123)); /* c6 */ - tmp11 = tmp10 + tmp12 + tmp13 - MULTIPLY(z2, FIX(1.841218003)); /* c2+c4-c6 */ - tmp0 = z1 + z3; - z2 -= tmp0; - tmp0 = MULTIPLY(tmp0, FIX(1.274162392)) + tmp13; /* c2 */ - tmp10 += tmp0 - MULTIPLY(z3, FIX(0.077722536)); /* c2-c4-c6 */ - tmp12 += tmp0 - MULTIPLY(z1, FIX(2.470602249)); /* c2+c4+c6 */ - tmp13 += MULTIPLY(z2, FIX(1.414213562)); /* c0 */ - - /* Odd part */ - - z1 = (INT32) wsptr[1]; - z2 = (INT32) wsptr[3]; - z3 = (INT32) wsptr[5]; - - tmp1 = MULTIPLY(z1 + z2, FIX(0.935414347)); /* (c3+c1-c5)/2 */ - tmp2 = MULTIPLY(z1 - z2, FIX(0.170262339)); /* (c3+c5-c1)/2 */ - tmp0 = tmp1 - tmp2; - tmp1 += tmp2; - tmp2 = MULTIPLY(z2 + z3, - FIX(1.378756276)); /* -c1 */ - tmp1 += tmp2; - z2 = MULTIPLY(z1 + z3, FIX(0.613604268)); /* c5 */ - tmp0 += z2; - tmp2 += z2 + MULTIPLY(z3, FIX(1.870828693)); /* c3+c1-c5 */ - - /* Final output stage */ - - outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp0, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp0, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp11 + tmp1, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp11 - tmp1, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp12 + tmp2, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp12 - tmp2, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp13, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - - wsptr += 7; /* advance pointer to next row */ - } -} - - -/* - * Perform dequantization and inverse DCT on one block of coefficients, - * producing a reduced-size 6x6 output block. - * - * Optimized algorithm with 3 multiplications in the 1-D kernel. - * cK represents sqrt(2) * cos(K*pi/12). - */ - -GLOBAL(void) -jpeg_idct_6x6 (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, - JSAMPARRAY output_buf, JDIMENSION output_col) -{ - INT32 tmp0, tmp1, tmp2, tmp10, tmp11, tmp12; - INT32 z1, z2, z3; - JCOEFPTR inptr; - ISLOW_MULT_TYPE * quantptr; - int * wsptr; - JSAMPROW outptr; - JSAMPLE *range_limit = IDCT_range_limit(cinfo); - int ctr; - int workspace[6*6]; /* buffers data between passes */ - SHIFT_TEMPS - - /* Pass 1: process columns from input, store into work array. */ - - inptr = coef_block; - quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; - wsptr = workspace; - for (ctr = 0; ctr < 6; ctr++, inptr++, quantptr++, wsptr++) { - /* Even part */ - - tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); - tmp0 <<= CONST_BITS; - /* Add fudge factor here for final descale. */ - tmp0 += ONE << (CONST_BITS-PASS1_BITS-1); - tmp2 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); - tmp10 = MULTIPLY(tmp2, FIX(0.707106781)); /* c4 */ - tmp1 = tmp0 + tmp10; - tmp11 = RIGHT_SHIFT(tmp0 - tmp10 - tmp10, CONST_BITS-PASS1_BITS); - tmp10 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); - tmp0 = MULTIPLY(tmp10, FIX(1.224744871)); /* c2 */ - tmp10 = tmp1 + tmp0; - tmp12 = tmp1 - tmp0; - - /* Odd part */ - - z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); - z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); - z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); - tmp1 = MULTIPLY(z1 + z3, FIX(0.366025404)); /* c5 */ - tmp0 = tmp1 + ((z1 + z2) << CONST_BITS); - tmp2 = tmp1 + ((z3 - z2) << CONST_BITS); - tmp1 = (z1 - z2 - z3) << PASS1_BITS; - - /* Final output stage */ - - wsptr[6*0] = (int) RIGHT_SHIFT(tmp10 + tmp0, CONST_BITS-PASS1_BITS); - wsptr[6*5] = (int) RIGHT_SHIFT(tmp10 - tmp0, CONST_BITS-PASS1_BITS); - wsptr[6*1] = (int) (tmp11 + tmp1); - wsptr[6*4] = (int) (tmp11 - tmp1); - wsptr[6*2] = (int) RIGHT_SHIFT(tmp12 + tmp2, CONST_BITS-PASS1_BITS); - wsptr[6*3] = (int) RIGHT_SHIFT(tmp12 - tmp2, CONST_BITS-PASS1_BITS); - } - - /* Pass 2: process 6 rows from work array, store into output array. */ - - wsptr = workspace; - for (ctr = 0; ctr < 6; ctr++) { - outptr = output_buf[ctr] + output_col; - - /* Even part */ - - /* Add fudge factor here for final descale. */ - tmp0 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); - tmp0 <<= CONST_BITS; - tmp2 = (INT32) wsptr[4]; - tmp10 = MULTIPLY(tmp2, FIX(0.707106781)); /* c4 */ - tmp1 = tmp0 + tmp10; - tmp11 = tmp0 - tmp10 - tmp10; - tmp10 = (INT32) wsptr[2]; - tmp0 = MULTIPLY(tmp10, FIX(1.224744871)); /* c2 */ - tmp10 = tmp1 + tmp0; - tmp12 = tmp1 - tmp0; - - /* Odd part */ - - z1 = (INT32) wsptr[1]; - z2 = (INT32) wsptr[3]; - z3 = (INT32) wsptr[5]; - tmp1 = MULTIPLY(z1 + z3, FIX(0.366025404)); /* c5 */ - tmp0 = tmp1 + ((z1 + z2) << CONST_BITS); - tmp2 = tmp1 + ((z3 - z2) << CONST_BITS); - tmp1 = (z1 - z2 - z3) << CONST_BITS; - - /* Final output stage */ - - outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp0, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp0, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp11 + tmp1, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp11 - tmp1, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp12 + tmp2, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp12 - tmp2, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - - wsptr += 6; /* advance pointer to next row */ - } -} - - -/* - * Perform dequantization and inverse DCT on one block of coefficients, - * producing a reduced-size 5x5 output block. - * - * Optimized algorithm with 5 multiplications in the 1-D kernel. - * cK represents sqrt(2) * cos(K*pi/10). - */ - -GLOBAL(void) -jpeg_idct_5x5 (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, - JSAMPARRAY output_buf, JDIMENSION output_col) -{ - INT32 tmp0, tmp1, tmp10, tmp11, tmp12; - INT32 z1, z2, z3; - JCOEFPTR inptr; - ISLOW_MULT_TYPE * quantptr; - int * wsptr; - JSAMPROW outptr; - JSAMPLE *range_limit = IDCT_range_limit(cinfo); - int ctr; - int workspace[5*5]; /* buffers data between passes */ - SHIFT_TEMPS - - /* Pass 1: process columns from input, store into work array. */ - - inptr = coef_block; - quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; - wsptr = workspace; - for (ctr = 0; ctr < 5; ctr++, inptr++, quantptr++, wsptr++) { - /* Even part */ - - tmp12 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); - tmp12 <<= CONST_BITS; - /* Add fudge factor here for final descale. */ - tmp12 += ONE << (CONST_BITS-PASS1_BITS-1); - tmp0 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); - tmp1 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); - z1 = MULTIPLY(tmp0 + tmp1, FIX(0.790569415)); /* (c2+c4)/2 */ - z2 = MULTIPLY(tmp0 - tmp1, FIX(0.353553391)); /* (c2-c4)/2 */ - z3 = tmp12 + z2; - tmp10 = z3 + z1; - tmp11 = z3 - z1; - tmp12 -= z2 << 2; - - /* Odd part */ - - z2 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); - z3 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); - - z1 = MULTIPLY(z2 + z3, FIX(0.831253876)); /* c3 */ - tmp0 = z1 + MULTIPLY(z2, FIX(0.513743148)); /* c1-c3 */ - tmp1 = z1 - MULTIPLY(z3, FIX(2.176250899)); /* c1+c3 */ - - /* Final output stage */ - - wsptr[5*0] = (int) RIGHT_SHIFT(tmp10 + tmp0, CONST_BITS-PASS1_BITS); - wsptr[5*4] = (int) RIGHT_SHIFT(tmp10 - tmp0, CONST_BITS-PASS1_BITS); - wsptr[5*1] = (int) RIGHT_SHIFT(tmp11 + tmp1, CONST_BITS-PASS1_BITS); - wsptr[5*3] = (int) RIGHT_SHIFT(tmp11 - tmp1, CONST_BITS-PASS1_BITS); - wsptr[5*2] = (int) RIGHT_SHIFT(tmp12, CONST_BITS-PASS1_BITS); - } - - /* Pass 2: process 5 rows from work array, store into output array. */ - - wsptr = workspace; - for (ctr = 0; ctr < 5; ctr++) { - outptr = output_buf[ctr] + output_col; - - /* Even part */ - - /* Add fudge factor here for final descale. */ - tmp12 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); - tmp12 <<= CONST_BITS; - tmp0 = (INT32) wsptr[2]; - tmp1 = (INT32) wsptr[4]; - z1 = MULTIPLY(tmp0 + tmp1, FIX(0.790569415)); /* (c2+c4)/2 */ - z2 = MULTIPLY(tmp0 - tmp1, FIX(0.353553391)); /* (c2-c4)/2 */ - z3 = tmp12 + z2; - tmp10 = z3 + z1; - tmp11 = z3 - z1; - tmp12 -= z2 << 2; - - /* Odd part */ - - z2 = (INT32) wsptr[1]; - z3 = (INT32) wsptr[3]; - - z1 = MULTIPLY(z2 + z3, FIX(0.831253876)); /* c3 */ - tmp0 = z1 + MULTIPLY(z2, FIX(0.513743148)); /* c1-c3 */ - tmp1 = z1 - MULTIPLY(z3, FIX(2.176250899)); /* c1+c3 */ - - /* Final output stage */ - - outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp0, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp0, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp11 + tmp1, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp11 - tmp1, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp12, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - - wsptr += 5; /* advance pointer to next row */ - } -} - - -/* - * Perform dequantization and inverse DCT on one block of coefficients, - * producing a reduced-size 4x4 output block. - * - * Optimized algorithm with 3 multiplications in the 1-D kernel. - * cK represents sqrt(2) * cos(K*pi/16) [refers to 8-point IDCT]. - */ - -GLOBAL(void) -jpeg_idct_4x4 (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, - JSAMPARRAY output_buf, JDIMENSION output_col) -{ - INT32 tmp0, tmp2, tmp10, tmp12; - INT32 z1, z2, z3; - JCOEFPTR inptr; - ISLOW_MULT_TYPE * quantptr; - int * wsptr; - JSAMPROW outptr; - JSAMPLE *range_limit = IDCT_range_limit(cinfo); - int ctr; - int workspace[4*4]; /* buffers data between passes */ - SHIFT_TEMPS - - /* Pass 1: process columns from input, store into work array. */ - - inptr = coef_block; - quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; - wsptr = workspace; - for (ctr = 0; ctr < 4; ctr++, inptr++, quantptr++, wsptr++) { - /* Even part */ - - tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); - tmp2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); - - tmp10 = (tmp0 + tmp2) << PASS1_BITS; - tmp12 = (tmp0 - tmp2) << PASS1_BITS; - - /* Odd part */ - /* Same rotation as in the even part of the 8x8 LL&M IDCT */ - - z2 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); - z3 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); - - z1 = MULTIPLY(z2 + z3, FIX_0_541196100); /* c6 */ - /* Add fudge factor here for final descale. */ - z1 += ONE << (CONST_BITS-PASS1_BITS-1); - tmp0 = RIGHT_SHIFT(z1 + MULTIPLY(z2, FIX_0_765366865), /* c2-c6 */ - CONST_BITS-PASS1_BITS); - tmp2 = RIGHT_SHIFT(z1 - MULTIPLY(z3, FIX_1_847759065), /* c2+c6 */ - CONST_BITS-PASS1_BITS); - - /* Final output stage */ - - wsptr[4*0] = (int) (tmp10 + tmp0); - wsptr[4*3] = (int) (tmp10 - tmp0); - wsptr[4*1] = (int) (tmp12 + tmp2); - wsptr[4*2] = (int) (tmp12 - tmp2); - } - - /* Pass 2: process 4 rows from work array, store into output array. */ - - wsptr = workspace; - for (ctr = 0; ctr < 4; ctr++) { - outptr = output_buf[ctr] + output_col; - - /* Even part */ - - /* Add fudge factor here for final descale. */ - tmp0 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); - tmp2 = (INT32) wsptr[2]; - - tmp10 = (tmp0 + tmp2) << CONST_BITS; - tmp12 = (tmp0 - tmp2) << CONST_BITS; - - /* Odd part */ - /* Same rotation as in the even part of the 8x8 LL&M IDCT */ - - z2 = (INT32) wsptr[1]; - z3 = (INT32) wsptr[3]; - - z1 = MULTIPLY(z2 + z3, FIX_0_541196100); /* c6 */ - tmp0 = z1 + MULTIPLY(z2, FIX_0_765366865); /* c2-c6 */ - tmp2 = z1 - MULTIPLY(z3, FIX_1_847759065); /* c2+c6 */ - - /* Final output stage */ - - outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp0, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp0, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp12 + tmp2, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp12 - tmp2, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - - wsptr += 4; /* advance pointer to next row */ - } -} - - -/* - * Perform dequantization and inverse DCT on one block of coefficients, - * producing a reduced-size 3x3 output block. - * - * Optimized algorithm with 2 multiplications in the 1-D kernel. - * cK represents sqrt(2) * cos(K*pi/6). - */ - -GLOBAL(void) -jpeg_idct_3x3 (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, - JSAMPARRAY output_buf, JDIMENSION output_col) -{ - INT32 tmp0, tmp2, tmp10, tmp12; - JCOEFPTR inptr; - ISLOW_MULT_TYPE * quantptr; - int * wsptr; - JSAMPROW outptr; - JSAMPLE *range_limit = IDCT_range_limit(cinfo); - int ctr; - int workspace[3*3]; /* buffers data between passes */ - SHIFT_TEMPS - - /* Pass 1: process columns from input, store into work array. */ - - inptr = coef_block; - quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; - wsptr = workspace; - for (ctr = 0; ctr < 3; ctr++, inptr++, quantptr++, wsptr++) { - /* Even part */ - - tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); - tmp0 <<= CONST_BITS; - /* Add fudge factor here for final descale. */ - tmp0 += ONE << (CONST_BITS-PASS1_BITS-1); - tmp2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); - tmp12 = MULTIPLY(tmp2, FIX(0.707106781)); /* c2 */ - tmp10 = tmp0 + tmp12; - tmp2 = tmp0 - tmp12 - tmp12; - - /* Odd part */ - - tmp12 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); - tmp0 = MULTIPLY(tmp12, FIX(1.224744871)); /* c1 */ - - /* Final output stage */ - - wsptr[3*0] = (int) RIGHT_SHIFT(tmp10 + tmp0, CONST_BITS-PASS1_BITS); - wsptr[3*2] = (int) RIGHT_SHIFT(tmp10 - tmp0, CONST_BITS-PASS1_BITS); - wsptr[3*1] = (int) RIGHT_SHIFT(tmp2, CONST_BITS-PASS1_BITS); - } - - /* Pass 2: process 3 rows from work array, store into output array. */ - - wsptr = workspace; - for (ctr = 0; ctr < 3; ctr++) { - outptr = output_buf[ctr] + output_col; - - /* Even part */ - - /* Add fudge factor here for final descale. */ - tmp0 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); - tmp0 <<= CONST_BITS; - tmp2 = (INT32) wsptr[2]; - tmp12 = MULTIPLY(tmp2, FIX(0.707106781)); /* c2 */ - tmp10 = tmp0 + tmp12; - tmp2 = tmp0 - tmp12 - tmp12; - - /* Odd part */ - - tmp12 = (INT32) wsptr[1]; - tmp0 = MULTIPLY(tmp12, FIX(1.224744871)); /* c1 */ - - /* Final output stage */ - - outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp0, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp0, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp2, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - - wsptr += 3; /* advance pointer to next row */ - } -} - - -/* - * Perform dequantization and inverse DCT on one block of coefficients, - * producing a reduced-size 2x2 output block. - * - * Multiplication-less algorithm. - */ - -GLOBAL(void) -jpeg_idct_2x2 (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, - JSAMPARRAY output_buf, JDIMENSION output_col) -{ - INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5; - ISLOW_MULT_TYPE * quantptr; - JSAMPROW outptr; - JSAMPLE *range_limit = IDCT_range_limit(cinfo); - SHIFT_TEMPS - - /* Pass 1: process columns from input. */ - - quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; - - /* Column 0 */ - tmp4 = DEQUANTIZE(coef_block[DCTSIZE*0], quantptr[DCTSIZE*0]); - tmp5 = DEQUANTIZE(coef_block[DCTSIZE*1], quantptr[DCTSIZE*1]); - /* Add fudge factor here for final descale. */ - tmp4 += ONE << 2; - - tmp0 = tmp4 + tmp5; - tmp2 = tmp4 - tmp5; - - /* Column 1 */ - tmp4 = DEQUANTIZE(coef_block[DCTSIZE*0+1], quantptr[DCTSIZE*0+1]); - tmp5 = DEQUANTIZE(coef_block[DCTSIZE*1+1], quantptr[DCTSIZE*1+1]); - - tmp1 = tmp4 + tmp5; - tmp3 = tmp4 - tmp5; - - /* Pass 2: process 2 rows, store into output array. */ - - /* Row 0 */ - outptr = output_buf[0] + output_col; - - outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp0 + tmp1, 3) & RANGE_MASK]; - outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp0 - tmp1, 3) & RANGE_MASK]; - - /* Row 1 */ - outptr = output_buf[1] + output_col; - - outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp2 + tmp3, 3) & RANGE_MASK]; - outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp2 - tmp3, 3) & RANGE_MASK]; -} - - -/* - * Perform dequantization and inverse DCT on one block of coefficients, - * producing a reduced-size 1x1 output block. - * - * We hardly need an inverse DCT routine for this: just take the - * average pixel value, which is one-eighth of the DC coefficient. - */ - -GLOBAL(void) -jpeg_idct_1x1 (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, - JSAMPARRAY output_buf, JDIMENSION output_col) -{ - int dcval; - ISLOW_MULT_TYPE * quantptr; - JSAMPLE *range_limit = IDCT_range_limit(cinfo); - SHIFT_TEMPS - - /* 1x1 is trivial: just take the DC coefficient divided by 8. */ - quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; - dcval = DEQUANTIZE(coef_block[0], quantptr[0]); - dcval = (int) DESCALE((INT32) dcval, 3); - - output_buf[0][output_col] = range_limit[dcval & RANGE_MASK]; -} - - -/* - * Perform dequantization and inverse DCT on one block of coefficients, - * producing a 9x9 output block. - * - * Optimized algorithm with 10 multiplications in the 1-D kernel. - * cK represents sqrt(2) * cos(K*pi/18). - */ - -GLOBAL(void) -jpeg_idct_9x9 (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, - JSAMPARRAY output_buf, JDIMENSION output_col) -{ - INT32 tmp0, tmp1, tmp2, tmp3, tmp10, tmp11, tmp12, tmp13, tmp14; - INT32 z1, z2, z3, z4; - JCOEFPTR inptr; - ISLOW_MULT_TYPE * quantptr; - int * wsptr; - JSAMPROW outptr; - JSAMPLE *range_limit = IDCT_range_limit(cinfo); - int ctr; - int workspace[8*9]; /* buffers data between passes */ - SHIFT_TEMPS - - /* Pass 1: process columns from input, store into work array. */ - - inptr = coef_block; - quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; - wsptr = workspace; - for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) { - /* Even part */ - - tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); - tmp0 <<= CONST_BITS; - /* Add fudge factor here for final descale. */ - tmp0 += ONE << (CONST_BITS-PASS1_BITS-1); - - z1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); - z2 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); - z3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); - - tmp3 = MULTIPLY(z3, FIX(0.707106781)); /* c6 */ - tmp1 = tmp0 + tmp3; - tmp2 = tmp0 - tmp3 - tmp3; - - tmp0 = MULTIPLY(z1 - z2, FIX(0.707106781)); /* c6 */ - tmp11 = tmp2 + tmp0; - tmp14 = tmp2 - tmp0 - tmp0; - - tmp0 = MULTIPLY(z1 + z2, FIX(1.328926049)); /* c2 */ - tmp2 = MULTIPLY(z1, FIX(1.083350441)); /* c4 */ - tmp3 = MULTIPLY(z2, FIX(0.245575608)); /* c8 */ - - tmp10 = tmp1 + tmp0 - tmp3; - tmp12 = tmp1 - tmp0 + tmp2; - tmp13 = tmp1 - tmp2 + tmp3; - - /* Odd part */ - - z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); - z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); - z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); - z4 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); - - z2 = MULTIPLY(z2, - FIX(1.224744871)); /* -c3 */ - - tmp2 = MULTIPLY(z1 + z3, FIX(0.909038955)); /* c5 */ - tmp3 = MULTIPLY(z1 + z4, FIX(0.483689525)); /* c7 */ - tmp0 = tmp2 + tmp3 - z2; - tmp1 = MULTIPLY(z3 - z4, FIX(1.392728481)); /* c1 */ - tmp2 += z2 - tmp1; - tmp3 += z2 + tmp1; - tmp1 = MULTIPLY(z1 - z3 - z4, FIX(1.224744871)); /* c3 */ - - /* Final output stage */ - - wsptr[8*0] = (int) RIGHT_SHIFT(tmp10 + tmp0, CONST_BITS-PASS1_BITS); - wsptr[8*8] = (int) RIGHT_SHIFT(tmp10 - tmp0, CONST_BITS-PASS1_BITS); - wsptr[8*1] = (int) RIGHT_SHIFT(tmp11 + tmp1, CONST_BITS-PASS1_BITS); - wsptr[8*7] = (int) RIGHT_SHIFT(tmp11 - tmp1, CONST_BITS-PASS1_BITS); - wsptr[8*2] = (int) RIGHT_SHIFT(tmp12 + tmp2, CONST_BITS-PASS1_BITS); - wsptr[8*6] = (int) RIGHT_SHIFT(tmp12 - tmp2, CONST_BITS-PASS1_BITS); - wsptr[8*3] = (int) RIGHT_SHIFT(tmp13 + tmp3, CONST_BITS-PASS1_BITS); - wsptr[8*5] = (int) RIGHT_SHIFT(tmp13 - tmp3, CONST_BITS-PASS1_BITS); - wsptr[8*4] = (int) RIGHT_SHIFT(tmp14, CONST_BITS-PASS1_BITS); - } - - /* Pass 2: process 9 rows from work array, store into output array. */ - - wsptr = workspace; - for (ctr = 0; ctr < 9; ctr++) { - outptr = output_buf[ctr] + output_col; - - /* Even part */ - - /* Add fudge factor here for final descale. */ - tmp0 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); - tmp0 <<= CONST_BITS; - - z1 = (INT32) wsptr[2]; - z2 = (INT32) wsptr[4]; - z3 = (INT32) wsptr[6]; - - tmp3 = MULTIPLY(z3, FIX(0.707106781)); /* c6 */ - tmp1 = tmp0 + tmp3; - tmp2 = tmp0 - tmp3 - tmp3; - - tmp0 = MULTIPLY(z1 - z2, FIX(0.707106781)); /* c6 */ - tmp11 = tmp2 + tmp0; - tmp14 = tmp2 - tmp0 - tmp0; - - tmp0 = MULTIPLY(z1 + z2, FIX(1.328926049)); /* c2 */ - tmp2 = MULTIPLY(z1, FIX(1.083350441)); /* c4 */ - tmp3 = MULTIPLY(z2, FIX(0.245575608)); /* c8 */ - - tmp10 = tmp1 + tmp0 - tmp3; - tmp12 = tmp1 - tmp0 + tmp2; - tmp13 = tmp1 - tmp2 + tmp3; - - /* Odd part */ - - z1 = (INT32) wsptr[1]; - z2 = (INT32) wsptr[3]; - z3 = (INT32) wsptr[5]; - z4 = (INT32) wsptr[7]; - - z2 = MULTIPLY(z2, - FIX(1.224744871)); /* -c3 */ - - tmp2 = MULTIPLY(z1 + z3, FIX(0.909038955)); /* c5 */ - tmp3 = MULTIPLY(z1 + z4, FIX(0.483689525)); /* c7 */ - tmp0 = tmp2 + tmp3 - z2; - tmp1 = MULTIPLY(z3 - z4, FIX(1.392728481)); /* c1 */ - tmp2 += z2 - tmp1; - tmp3 += z2 + tmp1; - tmp1 = MULTIPLY(z1 - z3 - z4, FIX(1.224744871)); /* c3 */ - - /* Final output stage */ - - outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp0, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[8] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp0, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp11 + tmp1, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp11 - tmp1, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp12 + tmp2, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp12 - tmp2, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp13 + tmp3, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp13 - tmp3, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp14, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - - wsptr += 8; /* advance pointer to next row */ - } -} - - -/* - * Perform dequantization and inverse DCT on one block of coefficients, - * producing a 10x10 output block. - * - * Optimized algorithm with 12 multiplications in the 1-D kernel. - * cK represents sqrt(2) * cos(K*pi/20). - */ - -GLOBAL(void) -jpeg_idct_10x10 (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, - JSAMPARRAY output_buf, JDIMENSION output_col) -{ - INT32 tmp10, tmp11, tmp12, tmp13, tmp14; - INT32 tmp20, tmp21, tmp22, tmp23, tmp24; - INT32 z1, z2, z3, z4, z5; - JCOEFPTR inptr; - ISLOW_MULT_TYPE * quantptr; - int * wsptr; - JSAMPROW outptr; - JSAMPLE *range_limit = IDCT_range_limit(cinfo); - int ctr; - int workspace[8*10]; /* buffers data between passes */ - SHIFT_TEMPS - - /* Pass 1: process columns from input, store into work array. */ - - inptr = coef_block; - quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; - wsptr = workspace; - for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) { - /* Even part */ - - z3 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); - z3 <<= CONST_BITS; - /* Add fudge factor here for final descale. */ - z3 += ONE << (CONST_BITS-PASS1_BITS-1); - z4 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); - z1 = MULTIPLY(z4, FIX(1.144122806)); /* c4 */ - z2 = MULTIPLY(z4, FIX(0.437016024)); /* c8 */ - tmp10 = z3 + z1; - tmp11 = z3 - z2; - - tmp22 = RIGHT_SHIFT(z3 - ((z1 - z2) << 1), /* c0 = (c4-c8)*2 */ - CONST_BITS-PASS1_BITS); - - z2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); - z3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); - - z1 = MULTIPLY(z2 + z3, FIX(0.831253876)); /* c6 */ - tmp12 = z1 + MULTIPLY(z2, FIX(0.513743148)); /* c2-c6 */ - tmp13 = z1 - MULTIPLY(z3, FIX(2.176250899)); /* c2+c6 */ - - tmp20 = tmp10 + tmp12; - tmp24 = tmp10 - tmp12; - tmp21 = tmp11 + tmp13; - tmp23 = tmp11 - tmp13; - - /* Odd part */ - - z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); - z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); - z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); - z4 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); - - tmp11 = z2 + z4; - tmp13 = z2 - z4; - - tmp12 = MULTIPLY(tmp13, FIX(0.309016994)); /* (c3-c7)/2 */ - z5 = z3 << CONST_BITS; - - z2 = MULTIPLY(tmp11, FIX(0.951056516)); /* (c3+c7)/2 */ - z4 = z5 + tmp12; - - tmp10 = MULTIPLY(z1, FIX(1.396802247)) + z2 + z4; /* c1 */ - tmp14 = MULTIPLY(z1, FIX(0.221231742)) - z2 + z4; /* c9 */ - - z2 = MULTIPLY(tmp11, FIX(0.587785252)); /* (c1-c9)/2 */ - z4 = z5 - tmp12 - (tmp13 << (CONST_BITS - 1)); - - tmp12 = (z1 - tmp13 - z3) << PASS1_BITS; - - tmp11 = MULTIPLY(z1, FIX(1.260073511)) - z2 - z4; /* c3 */ - tmp13 = MULTIPLY(z1, FIX(0.642039522)) - z2 + z4; /* c7 */ - - /* Final output stage */ - - wsptr[8*0] = (int) RIGHT_SHIFT(tmp20 + tmp10, CONST_BITS-PASS1_BITS); - wsptr[8*9] = (int) RIGHT_SHIFT(tmp20 - tmp10, CONST_BITS-PASS1_BITS); - wsptr[8*1] = (int) RIGHT_SHIFT(tmp21 + tmp11, CONST_BITS-PASS1_BITS); - wsptr[8*8] = (int) RIGHT_SHIFT(tmp21 - tmp11, CONST_BITS-PASS1_BITS); - wsptr[8*2] = (int) (tmp22 + tmp12); - wsptr[8*7] = (int) (tmp22 - tmp12); - wsptr[8*3] = (int) RIGHT_SHIFT(tmp23 + tmp13, CONST_BITS-PASS1_BITS); - wsptr[8*6] = (int) RIGHT_SHIFT(tmp23 - tmp13, CONST_BITS-PASS1_BITS); - wsptr[8*4] = (int) RIGHT_SHIFT(tmp24 + tmp14, CONST_BITS-PASS1_BITS); - wsptr[8*5] = (int) RIGHT_SHIFT(tmp24 - tmp14, CONST_BITS-PASS1_BITS); - } - - /* Pass 2: process 10 rows from work array, store into output array. */ - - wsptr = workspace; - for (ctr = 0; ctr < 10; ctr++) { - outptr = output_buf[ctr] + output_col; - - /* Even part */ - - /* Add fudge factor here for final descale. */ - z3 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); - z3 <<= CONST_BITS; - z4 = (INT32) wsptr[4]; - z1 = MULTIPLY(z4, FIX(1.144122806)); /* c4 */ - z2 = MULTIPLY(z4, FIX(0.437016024)); /* c8 */ - tmp10 = z3 + z1; - tmp11 = z3 - z2; - - tmp22 = z3 - ((z1 - z2) << 1); /* c0 = (c4-c8)*2 */ - - z2 = (INT32) wsptr[2]; - z3 = (INT32) wsptr[6]; - - z1 = MULTIPLY(z2 + z3, FIX(0.831253876)); /* c6 */ - tmp12 = z1 + MULTIPLY(z2, FIX(0.513743148)); /* c2-c6 */ - tmp13 = z1 - MULTIPLY(z3, FIX(2.176250899)); /* c2+c6 */ - - tmp20 = tmp10 + tmp12; - tmp24 = tmp10 - tmp12; - tmp21 = tmp11 + tmp13; - tmp23 = tmp11 - tmp13; - - /* Odd part */ - - z1 = (INT32) wsptr[1]; - z2 = (INT32) wsptr[3]; - z3 = (INT32) wsptr[5]; - z3 <<= CONST_BITS; - z4 = (INT32) wsptr[7]; - - tmp11 = z2 + z4; - tmp13 = z2 - z4; - - tmp12 = MULTIPLY(tmp13, FIX(0.309016994)); /* (c3-c7)/2 */ - - z2 = MULTIPLY(tmp11, FIX(0.951056516)); /* (c3+c7)/2 */ - z4 = z3 + tmp12; - - tmp10 = MULTIPLY(z1, FIX(1.396802247)) + z2 + z4; /* c1 */ - tmp14 = MULTIPLY(z1, FIX(0.221231742)) - z2 + z4; /* c9 */ - - z2 = MULTIPLY(tmp11, FIX(0.587785252)); /* (c1-c9)/2 */ - z4 = z3 - tmp12 - (tmp13 << (CONST_BITS - 1)); - - tmp12 = ((z1 - tmp13) << CONST_BITS) - z3; - - tmp11 = MULTIPLY(z1, FIX(1.260073511)) - z2 - z4; /* c3 */ - tmp13 = MULTIPLY(z1, FIX(0.642039522)) - z2 + z4; /* c7 */ - - /* Final output stage */ - - outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp10, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[9] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp10, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp11, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[8] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp11, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp12, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp12, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp23 + tmp13, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp23 - tmp13, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp24 + tmp14, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp24 - tmp14, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - - wsptr += 8; /* advance pointer to next row */ - } -} - - -/* - * Perform dequantization and inverse DCT on one block of coefficients, - * producing a 11x11 output block. - * - * Optimized algorithm with 24 multiplications in the 1-D kernel. - * cK represents sqrt(2) * cos(K*pi/22). - */ - -GLOBAL(void) -jpeg_idct_11x11 (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, - JSAMPARRAY output_buf, JDIMENSION output_col) -{ - INT32 tmp10, tmp11, tmp12, tmp13, tmp14; - INT32 tmp20, tmp21, tmp22, tmp23, tmp24, tmp25; - INT32 z1, z2, z3, z4; - JCOEFPTR inptr; - ISLOW_MULT_TYPE * quantptr; - int * wsptr; - JSAMPROW outptr; - JSAMPLE *range_limit = IDCT_range_limit(cinfo); - int ctr; - int workspace[8*11]; /* buffers data between passes */ - SHIFT_TEMPS - - /* Pass 1: process columns from input, store into work array. */ - - inptr = coef_block; - quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; - wsptr = workspace; - for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) { - /* Even part */ - - tmp10 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); - tmp10 <<= CONST_BITS; - /* Add fudge factor here for final descale. */ - tmp10 += ONE << (CONST_BITS-PASS1_BITS-1); - - z1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); - z2 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); - z3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); - - tmp20 = MULTIPLY(z2 - z3, FIX(2.546640132)); /* c2+c4 */ - tmp23 = MULTIPLY(z2 - z1, FIX(0.430815045)); /* c2-c6 */ - z4 = z1 + z3; - tmp24 = MULTIPLY(z4, - FIX(1.155664402)); /* -(c2-c10) */ - z4 -= z2; - tmp25 = tmp10 + MULTIPLY(z4, FIX(1.356927976)); /* c2 */ - tmp21 = tmp20 + tmp23 + tmp25 - - MULTIPLY(z2, FIX(1.821790775)); /* c2+c4+c10-c6 */ - tmp20 += tmp25 + MULTIPLY(z3, FIX(2.115825087)); /* c4+c6 */ - tmp23 += tmp25 - MULTIPLY(z1, FIX(1.513598477)); /* c6+c8 */ - tmp24 += tmp25; - tmp22 = tmp24 - MULTIPLY(z3, FIX(0.788749120)); /* c8+c10 */ - tmp24 += MULTIPLY(z2, FIX(1.944413522)) - /* c2+c8 */ - MULTIPLY(z1, FIX(1.390975730)); /* c4+c10 */ - tmp25 = tmp10 - MULTIPLY(z4, FIX(1.414213562)); /* c0 */ - - /* Odd part */ - - z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); - z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); - z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); - z4 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); - - tmp11 = z1 + z2; - tmp14 = MULTIPLY(tmp11 + z3 + z4, FIX(0.398430003)); /* c9 */ - tmp11 = MULTIPLY(tmp11, FIX(0.887983902)); /* c3-c9 */ - tmp12 = MULTIPLY(z1 + z3, FIX(0.670361295)); /* c5-c9 */ - tmp13 = tmp14 + MULTIPLY(z1 + z4, FIX(0.366151574)); /* c7-c9 */ - tmp10 = tmp11 + tmp12 + tmp13 - - MULTIPLY(z1, FIX(0.923107866)); /* c7+c5+c3-c1-2*c9 */ - z1 = tmp14 - MULTIPLY(z2 + z3, FIX(1.163011579)); /* c7+c9 */ - tmp11 += z1 + MULTIPLY(z2, FIX(2.073276588)); /* c1+c7+3*c9-c3 */ - tmp12 += z1 - MULTIPLY(z3, FIX(1.192193623)); /* c3+c5-c7-c9 */ - z1 = MULTIPLY(z2 + z4, - FIX(1.798248910)); /* -(c1+c9) */ - tmp11 += z1; - tmp13 += z1 + MULTIPLY(z4, FIX(2.102458632)); /* c1+c5+c9-c7 */ - tmp14 += MULTIPLY(z2, - FIX(1.467221301)) + /* -(c5+c9) */ - MULTIPLY(z3, FIX(1.001388905)) - /* c1-c9 */ - MULTIPLY(z4, FIX(1.684843907)); /* c3+c9 */ - - /* Final output stage */ - - wsptr[8*0] = (int) RIGHT_SHIFT(tmp20 + tmp10, CONST_BITS-PASS1_BITS); - wsptr[8*10] = (int) RIGHT_SHIFT(tmp20 - tmp10, CONST_BITS-PASS1_BITS); - wsptr[8*1] = (int) RIGHT_SHIFT(tmp21 + tmp11, CONST_BITS-PASS1_BITS); - wsptr[8*9] = (int) RIGHT_SHIFT(tmp21 - tmp11, CONST_BITS-PASS1_BITS); - wsptr[8*2] = (int) RIGHT_SHIFT(tmp22 + tmp12, CONST_BITS-PASS1_BITS); - wsptr[8*8] = (int) RIGHT_SHIFT(tmp22 - tmp12, CONST_BITS-PASS1_BITS); - wsptr[8*3] = (int) RIGHT_SHIFT(tmp23 + tmp13, CONST_BITS-PASS1_BITS); - wsptr[8*7] = (int) RIGHT_SHIFT(tmp23 - tmp13, CONST_BITS-PASS1_BITS); - wsptr[8*4] = (int) RIGHT_SHIFT(tmp24 + tmp14, CONST_BITS-PASS1_BITS); - wsptr[8*6] = (int) RIGHT_SHIFT(tmp24 - tmp14, CONST_BITS-PASS1_BITS); - wsptr[8*5] = (int) RIGHT_SHIFT(tmp25, CONST_BITS-PASS1_BITS); - } - - /* Pass 2: process 11 rows from work array, store into output array. */ - - wsptr = workspace; - for (ctr = 0; ctr < 11; ctr++) { - outptr = output_buf[ctr] + output_col; - - /* Even part */ - - /* Add fudge factor here for final descale. */ - tmp10 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); - tmp10 <<= CONST_BITS; - - z1 = (INT32) wsptr[2]; - z2 = (INT32) wsptr[4]; - z3 = (INT32) wsptr[6]; - - tmp20 = MULTIPLY(z2 - z3, FIX(2.546640132)); /* c2+c4 */ - tmp23 = MULTIPLY(z2 - z1, FIX(0.430815045)); /* c2-c6 */ - z4 = z1 + z3; - tmp24 = MULTIPLY(z4, - FIX(1.155664402)); /* -(c2-c10) */ - z4 -= z2; - tmp25 = tmp10 + MULTIPLY(z4, FIX(1.356927976)); /* c2 */ - tmp21 = tmp20 + tmp23 + tmp25 - - MULTIPLY(z2, FIX(1.821790775)); /* c2+c4+c10-c6 */ - tmp20 += tmp25 + MULTIPLY(z3, FIX(2.115825087)); /* c4+c6 */ - tmp23 += tmp25 - MULTIPLY(z1, FIX(1.513598477)); /* c6+c8 */ - tmp24 += tmp25; - tmp22 = tmp24 - MULTIPLY(z3, FIX(0.788749120)); /* c8+c10 */ - tmp24 += MULTIPLY(z2, FIX(1.944413522)) - /* c2+c8 */ - MULTIPLY(z1, FIX(1.390975730)); /* c4+c10 */ - tmp25 = tmp10 - MULTIPLY(z4, FIX(1.414213562)); /* c0 */ - - /* Odd part */ - - z1 = (INT32) wsptr[1]; - z2 = (INT32) wsptr[3]; - z3 = (INT32) wsptr[5]; - z4 = (INT32) wsptr[7]; - - tmp11 = z1 + z2; - tmp14 = MULTIPLY(tmp11 + z3 + z4, FIX(0.398430003)); /* c9 */ - tmp11 = MULTIPLY(tmp11, FIX(0.887983902)); /* c3-c9 */ - tmp12 = MULTIPLY(z1 + z3, FIX(0.670361295)); /* c5-c9 */ - tmp13 = tmp14 + MULTIPLY(z1 + z4, FIX(0.366151574)); /* c7-c9 */ - tmp10 = tmp11 + tmp12 + tmp13 - - MULTIPLY(z1, FIX(0.923107866)); /* c7+c5+c3-c1-2*c9 */ - z1 = tmp14 - MULTIPLY(z2 + z3, FIX(1.163011579)); /* c7+c9 */ - tmp11 += z1 + MULTIPLY(z2, FIX(2.073276588)); /* c1+c7+3*c9-c3 */ - tmp12 += z1 - MULTIPLY(z3, FIX(1.192193623)); /* c3+c5-c7-c9 */ - z1 = MULTIPLY(z2 + z4, - FIX(1.798248910)); /* -(c1+c9) */ - tmp11 += z1; - tmp13 += z1 + MULTIPLY(z4, FIX(2.102458632)); /* c1+c5+c9-c7 */ - tmp14 += MULTIPLY(z2, - FIX(1.467221301)) + /* -(c5+c9) */ - MULTIPLY(z3, FIX(1.001388905)) - /* c1-c9 */ - MULTIPLY(z4, FIX(1.684843907)); /* c3+c9 */ - - /* Final output stage */ - - outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp10, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[10] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp10, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp11, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[9] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp11, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp12, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[8] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp12, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp23 + tmp13, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp23 - tmp13, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp24 + tmp14, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp24 - tmp14, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp25, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - - wsptr += 8; /* advance pointer to next row */ - } -} - - -/* - * Perform dequantization and inverse DCT on one block of coefficients, - * producing a 12x12 output block. - * - * Optimized algorithm with 15 multiplications in the 1-D kernel. - * cK represents sqrt(2) * cos(K*pi/24). - */ - -GLOBAL(void) -jpeg_idct_12x12 (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, - JSAMPARRAY output_buf, JDIMENSION output_col) -{ - INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15; - INT32 tmp20, tmp21, tmp22, tmp23, tmp24, tmp25; - INT32 z1, z2, z3, z4; - JCOEFPTR inptr; - ISLOW_MULT_TYPE * quantptr; - int * wsptr; - JSAMPROW outptr; - JSAMPLE *range_limit = IDCT_range_limit(cinfo); - int ctr; - int workspace[8*12]; /* buffers data between passes */ - SHIFT_TEMPS - - /* Pass 1: process columns from input, store into work array. */ - - inptr = coef_block; - quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; - wsptr = workspace; - for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) { - /* Even part */ - - z3 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); - z3 <<= CONST_BITS; - /* Add fudge factor here for final descale. */ - z3 += ONE << (CONST_BITS-PASS1_BITS-1); - - z4 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); - z4 = MULTIPLY(z4, FIX(1.224744871)); /* c4 */ - - tmp10 = z3 + z4; - tmp11 = z3 - z4; - - z1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); - z4 = MULTIPLY(z1, FIX(1.366025404)); /* c2 */ - z1 <<= CONST_BITS; - z2 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); - z2 <<= CONST_BITS; - - tmp12 = z1 - z2; - - tmp21 = z3 + tmp12; - tmp24 = z3 - tmp12; - - tmp12 = z4 + z2; - - tmp20 = tmp10 + tmp12; - tmp25 = tmp10 - tmp12; - - tmp12 = z4 - z1 - z2; - - tmp22 = tmp11 + tmp12; - tmp23 = tmp11 - tmp12; - - /* Odd part */ - - z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); - z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); - z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); - z4 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); - - tmp11 = MULTIPLY(z2, FIX(1.306562965)); /* c3 */ - tmp14 = MULTIPLY(z2, - FIX_0_541196100); /* -c9 */ - - tmp10 = z1 + z3; - tmp15 = MULTIPLY(tmp10 + z4, FIX(0.860918669)); /* c7 */ - tmp12 = tmp15 + MULTIPLY(tmp10, FIX(0.261052384)); /* c5-c7 */ - tmp10 = tmp12 + tmp11 + MULTIPLY(z1, FIX(0.280143716)); /* c1-c5 */ - tmp13 = MULTIPLY(z3 + z4, - FIX(1.045510580)); /* -(c7+c11) */ - tmp12 += tmp13 + tmp14 - MULTIPLY(z3, FIX(1.478575242)); /* c1+c5-c7-c11 */ - tmp13 += tmp15 - tmp11 + MULTIPLY(z4, FIX(1.586706681)); /* c1+c11 */ - tmp15 += tmp14 - MULTIPLY(z1, FIX(0.676326758)) - /* c7-c11 */ - MULTIPLY(z4, FIX(1.982889723)); /* c5+c7 */ - - z1 -= z4; - z2 -= z3; - z3 = MULTIPLY(z1 + z2, FIX_0_541196100); /* c9 */ - tmp11 = z3 + MULTIPLY(z1, FIX_0_765366865); /* c3-c9 */ - tmp14 = z3 - MULTIPLY(z2, FIX_1_847759065); /* c3+c9 */ - - /* Final output stage */ - - wsptr[8*0] = (int) RIGHT_SHIFT(tmp20 + tmp10, CONST_BITS-PASS1_BITS); - wsptr[8*11] = (int) RIGHT_SHIFT(tmp20 - tmp10, CONST_BITS-PASS1_BITS); - wsptr[8*1] = (int) RIGHT_SHIFT(tmp21 + tmp11, CONST_BITS-PASS1_BITS); - wsptr[8*10] = (int) RIGHT_SHIFT(tmp21 - tmp11, CONST_BITS-PASS1_BITS); - wsptr[8*2] = (int) RIGHT_SHIFT(tmp22 + tmp12, CONST_BITS-PASS1_BITS); - wsptr[8*9] = (int) RIGHT_SHIFT(tmp22 - tmp12, CONST_BITS-PASS1_BITS); - wsptr[8*3] = (int) RIGHT_SHIFT(tmp23 + tmp13, CONST_BITS-PASS1_BITS); - wsptr[8*8] = (int) RIGHT_SHIFT(tmp23 - tmp13, CONST_BITS-PASS1_BITS); - wsptr[8*4] = (int) RIGHT_SHIFT(tmp24 + tmp14, CONST_BITS-PASS1_BITS); - wsptr[8*7] = (int) RIGHT_SHIFT(tmp24 - tmp14, CONST_BITS-PASS1_BITS); - wsptr[8*5] = (int) RIGHT_SHIFT(tmp25 + tmp15, CONST_BITS-PASS1_BITS); - wsptr[8*6] = (int) RIGHT_SHIFT(tmp25 - tmp15, CONST_BITS-PASS1_BITS); - } - - /* Pass 2: process 12 rows from work array, store into output array. */ - - wsptr = workspace; - for (ctr = 0; ctr < 12; ctr++) { - outptr = output_buf[ctr] + output_col; - - /* Even part */ - - /* Add fudge factor here for final descale. */ - z3 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); - z3 <<= CONST_BITS; - - z4 = (INT32) wsptr[4]; - z4 = MULTIPLY(z4, FIX(1.224744871)); /* c4 */ - - tmp10 = z3 + z4; - tmp11 = z3 - z4; - - z1 = (INT32) wsptr[2]; - z4 = MULTIPLY(z1, FIX(1.366025404)); /* c2 */ - z1 <<= CONST_BITS; - z2 = (INT32) wsptr[6]; - z2 <<= CONST_BITS; - - tmp12 = z1 - z2; - - tmp21 = z3 + tmp12; - tmp24 = z3 - tmp12; - - tmp12 = z4 + z2; - - tmp20 = tmp10 + tmp12; - tmp25 = tmp10 - tmp12; - - tmp12 = z4 - z1 - z2; - - tmp22 = tmp11 + tmp12; - tmp23 = tmp11 - tmp12; - - /* Odd part */ - - z1 = (INT32) wsptr[1]; - z2 = (INT32) wsptr[3]; - z3 = (INT32) wsptr[5]; - z4 = (INT32) wsptr[7]; - - tmp11 = MULTIPLY(z2, FIX(1.306562965)); /* c3 */ - tmp14 = MULTIPLY(z2, - FIX_0_541196100); /* -c9 */ - - tmp10 = z1 + z3; - tmp15 = MULTIPLY(tmp10 + z4, FIX(0.860918669)); /* c7 */ - tmp12 = tmp15 + MULTIPLY(tmp10, FIX(0.261052384)); /* c5-c7 */ - tmp10 = tmp12 + tmp11 + MULTIPLY(z1, FIX(0.280143716)); /* c1-c5 */ - tmp13 = MULTIPLY(z3 + z4, - FIX(1.045510580)); /* -(c7+c11) */ - tmp12 += tmp13 + tmp14 - MULTIPLY(z3, FIX(1.478575242)); /* c1+c5-c7-c11 */ - tmp13 += tmp15 - tmp11 + MULTIPLY(z4, FIX(1.586706681)); /* c1+c11 */ - tmp15 += tmp14 - MULTIPLY(z1, FIX(0.676326758)) - /* c7-c11 */ - MULTIPLY(z4, FIX(1.982889723)); /* c5+c7 */ - - z1 -= z4; - z2 -= z3; - z3 = MULTIPLY(z1 + z2, FIX_0_541196100); /* c9 */ - tmp11 = z3 + MULTIPLY(z1, FIX_0_765366865); /* c3-c9 */ - tmp14 = z3 - MULTIPLY(z2, FIX_1_847759065); /* c3+c9 */ - - /* Final output stage */ - - outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp10, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[11] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp10, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp11, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[10] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp11, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp12, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[9] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp12, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp23 + tmp13, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[8] = range_limit[(int) RIGHT_SHIFT(tmp23 - tmp13, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp24 + tmp14, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp24 - tmp14, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp25 + tmp15, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp25 - tmp15, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - - wsptr += 8; /* advance pointer to next row */ - } -} - - -/* - * Perform dequantization and inverse DCT on one block of coefficients, - * producing a 13x13 output block. - * - * Optimized algorithm with 29 multiplications in the 1-D kernel. - * cK represents sqrt(2) * cos(K*pi/26). - */ - -GLOBAL(void) -jpeg_idct_13x13 (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, - JSAMPARRAY output_buf, JDIMENSION output_col) -{ - INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15; - INT32 tmp20, tmp21, tmp22, tmp23, tmp24, tmp25, tmp26; - INT32 z1, z2, z3, z4; - JCOEFPTR inptr; - ISLOW_MULT_TYPE * quantptr; - int * wsptr; - JSAMPROW outptr; - JSAMPLE *range_limit = IDCT_range_limit(cinfo); - int ctr; - int workspace[8*13]; /* buffers data between passes */ - SHIFT_TEMPS - - /* Pass 1: process columns from input, store into work array. */ - - inptr = coef_block; - quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; - wsptr = workspace; - for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) { - /* Even part */ - - z1 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); - z1 <<= CONST_BITS; - /* Add fudge factor here for final descale. */ - z1 += ONE << (CONST_BITS-PASS1_BITS-1); - - z2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); - z3 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); - z4 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); - - tmp10 = z3 + z4; - tmp11 = z3 - z4; - - tmp12 = MULTIPLY(tmp10, FIX(1.155388986)); /* (c4+c6)/2 */ - tmp13 = MULTIPLY(tmp11, FIX(0.096834934)) + z1; /* (c4-c6)/2 */ - - tmp20 = MULTIPLY(z2, FIX(1.373119086)) + tmp12 + tmp13; /* c2 */ - tmp22 = MULTIPLY(z2, FIX(0.501487041)) - tmp12 + tmp13; /* c10 */ - - tmp12 = MULTIPLY(tmp10, FIX(0.316450131)); /* (c8-c12)/2 */ - tmp13 = MULTIPLY(tmp11, FIX(0.486914739)) + z1; /* (c8+c12)/2 */ - - tmp21 = MULTIPLY(z2, FIX(1.058554052)) - tmp12 + tmp13; /* c6 */ - tmp25 = MULTIPLY(z2, - FIX(1.252223920)) + tmp12 + tmp13; /* c4 */ - - tmp12 = MULTIPLY(tmp10, FIX(0.435816023)); /* (c2-c10)/2 */ - tmp13 = MULTIPLY(tmp11, FIX(0.937303064)) - z1; /* (c2+c10)/2 */ - - tmp23 = MULTIPLY(z2, - FIX(0.170464608)) - tmp12 - tmp13; /* c12 */ - tmp24 = MULTIPLY(z2, - FIX(0.803364869)) + tmp12 - tmp13; /* c8 */ - - tmp26 = MULTIPLY(tmp11 - z2, FIX(1.414213562)) + z1; /* c0 */ - - /* Odd part */ - - z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); - z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); - z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); - z4 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); - - tmp11 = MULTIPLY(z1 + z2, FIX(1.322312651)); /* c3 */ - tmp12 = MULTIPLY(z1 + z3, FIX(1.163874945)); /* c5 */ - tmp15 = z1 + z4; - tmp13 = MULTIPLY(tmp15, FIX(0.937797057)); /* c7 */ - tmp10 = tmp11 + tmp12 + tmp13 - - MULTIPLY(z1, FIX(2.020082300)); /* c7+c5+c3-c1 */ - tmp14 = MULTIPLY(z2 + z3, - FIX(0.338443458)); /* -c11 */ - tmp11 += tmp14 + MULTIPLY(z2, FIX(0.837223564)); /* c5+c9+c11-c3 */ - tmp12 += tmp14 - MULTIPLY(z3, FIX(1.572116027)); /* c1+c5-c9-c11 */ - tmp14 = MULTIPLY(z2 + z4, - FIX(1.163874945)); /* -c5 */ - tmp11 += tmp14; - tmp13 += tmp14 + MULTIPLY(z4, FIX(2.205608352)); /* c3+c5+c9-c7 */ - tmp14 = MULTIPLY(z3 + z4, - FIX(0.657217813)); /* -c9 */ - tmp12 += tmp14; - tmp13 += tmp14; - tmp15 = MULTIPLY(tmp15, FIX(0.338443458)); /* c11 */ - tmp14 = tmp15 + MULTIPLY(z1, FIX(0.318774355)) - /* c9-c11 */ - MULTIPLY(z2, FIX(0.466105296)); /* c1-c7 */ - z1 = MULTIPLY(z3 - z2, FIX(0.937797057)); /* c7 */ - tmp14 += z1; - tmp15 += z1 + MULTIPLY(z3, FIX(0.384515595)) - /* c3-c7 */ - MULTIPLY(z4, FIX(1.742345811)); /* c1+c11 */ - - /* Final output stage */ - - wsptr[8*0] = (int) RIGHT_SHIFT(tmp20 + tmp10, CONST_BITS-PASS1_BITS); - wsptr[8*12] = (int) RIGHT_SHIFT(tmp20 - tmp10, CONST_BITS-PASS1_BITS); - wsptr[8*1] = (int) RIGHT_SHIFT(tmp21 + tmp11, CONST_BITS-PASS1_BITS); - wsptr[8*11] = (int) RIGHT_SHIFT(tmp21 - tmp11, CONST_BITS-PASS1_BITS); - wsptr[8*2] = (int) RIGHT_SHIFT(tmp22 + tmp12, CONST_BITS-PASS1_BITS); - wsptr[8*10] = (int) RIGHT_SHIFT(tmp22 - tmp12, CONST_BITS-PASS1_BITS); - wsptr[8*3] = (int) RIGHT_SHIFT(tmp23 + tmp13, CONST_BITS-PASS1_BITS); - wsptr[8*9] = (int) RIGHT_SHIFT(tmp23 - tmp13, CONST_BITS-PASS1_BITS); - wsptr[8*4] = (int) RIGHT_SHIFT(tmp24 + tmp14, CONST_BITS-PASS1_BITS); - wsptr[8*8] = (int) RIGHT_SHIFT(tmp24 - tmp14, CONST_BITS-PASS1_BITS); - wsptr[8*5] = (int) RIGHT_SHIFT(tmp25 + tmp15, CONST_BITS-PASS1_BITS); - wsptr[8*7] = (int) RIGHT_SHIFT(tmp25 - tmp15, CONST_BITS-PASS1_BITS); - wsptr[8*6] = (int) RIGHT_SHIFT(tmp26, CONST_BITS-PASS1_BITS); - } - - /* Pass 2: process 13 rows from work array, store into output array. */ - - wsptr = workspace; - for (ctr = 0; ctr < 13; ctr++) { - outptr = output_buf[ctr] + output_col; - - /* Even part */ - - /* Add fudge factor here for final descale. */ - z1 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); - z1 <<= CONST_BITS; - - z2 = (INT32) wsptr[2]; - z3 = (INT32) wsptr[4]; - z4 = (INT32) wsptr[6]; - - tmp10 = z3 + z4; - tmp11 = z3 - z4; - - tmp12 = MULTIPLY(tmp10, FIX(1.155388986)); /* (c4+c6)/2 */ - tmp13 = MULTIPLY(tmp11, FIX(0.096834934)) + z1; /* (c4-c6)/2 */ - - tmp20 = MULTIPLY(z2, FIX(1.373119086)) + tmp12 + tmp13; /* c2 */ - tmp22 = MULTIPLY(z2, FIX(0.501487041)) - tmp12 + tmp13; /* c10 */ - - tmp12 = MULTIPLY(tmp10, FIX(0.316450131)); /* (c8-c12)/2 */ - tmp13 = MULTIPLY(tmp11, FIX(0.486914739)) + z1; /* (c8+c12)/2 */ - - tmp21 = MULTIPLY(z2, FIX(1.058554052)) - tmp12 + tmp13; /* c6 */ - tmp25 = MULTIPLY(z2, - FIX(1.252223920)) + tmp12 + tmp13; /* c4 */ - - tmp12 = MULTIPLY(tmp10, FIX(0.435816023)); /* (c2-c10)/2 */ - tmp13 = MULTIPLY(tmp11, FIX(0.937303064)) - z1; /* (c2+c10)/2 */ - - tmp23 = MULTIPLY(z2, - FIX(0.170464608)) - tmp12 - tmp13; /* c12 */ - tmp24 = MULTIPLY(z2, - FIX(0.803364869)) + tmp12 - tmp13; /* c8 */ - - tmp26 = MULTIPLY(tmp11 - z2, FIX(1.414213562)) + z1; /* c0 */ - - /* Odd part */ - - z1 = (INT32) wsptr[1]; - z2 = (INT32) wsptr[3]; - z3 = (INT32) wsptr[5]; - z4 = (INT32) wsptr[7]; - - tmp11 = MULTIPLY(z1 + z2, FIX(1.322312651)); /* c3 */ - tmp12 = MULTIPLY(z1 + z3, FIX(1.163874945)); /* c5 */ - tmp15 = z1 + z4; - tmp13 = MULTIPLY(tmp15, FIX(0.937797057)); /* c7 */ - tmp10 = tmp11 + tmp12 + tmp13 - - MULTIPLY(z1, FIX(2.020082300)); /* c7+c5+c3-c1 */ - tmp14 = MULTIPLY(z2 + z3, - FIX(0.338443458)); /* -c11 */ - tmp11 += tmp14 + MULTIPLY(z2, FIX(0.837223564)); /* c5+c9+c11-c3 */ - tmp12 += tmp14 - MULTIPLY(z3, FIX(1.572116027)); /* c1+c5-c9-c11 */ - tmp14 = MULTIPLY(z2 + z4, - FIX(1.163874945)); /* -c5 */ - tmp11 += tmp14; - tmp13 += tmp14 + MULTIPLY(z4, FIX(2.205608352)); /* c3+c5+c9-c7 */ - tmp14 = MULTIPLY(z3 + z4, - FIX(0.657217813)); /* -c9 */ - tmp12 += tmp14; - tmp13 += tmp14; - tmp15 = MULTIPLY(tmp15, FIX(0.338443458)); /* c11 */ - tmp14 = tmp15 + MULTIPLY(z1, FIX(0.318774355)) - /* c9-c11 */ - MULTIPLY(z2, FIX(0.466105296)); /* c1-c7 */ - z1 = MULTIPLY(z3 - z2, FIX(0.937797057)); /* c7 */ - tmp14 += z1; - tmp15 += z1 + MULTIPLY(z3, FIX(0.384515595)) - /* c3-c7 */ - MULTIPLY(z4, FIX(1.742345811)); /* c1+c11 */ - - /* Final output stage */ - - outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp10, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[12] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp10, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp11, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[11] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp11, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp12, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[10] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp12, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp23 + tmp13, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[9] = range_limit[(int) RIGHT_SHIFT(tmp23 - tmp13, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp24 + tmp14, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[8] = range_limit[(int) RIGHT_SHIFT(tmp24 - tmp14, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp25 + tmp15, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp25 - tmp15, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp26, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - - wsptr += 8; /* advance pointer to next row */ - } -} - - -/* - * Perform dequantization and inverse DCT on one block of coefficients, - * producing a 14x14 output block. - * - * Optimized algorithm with 20 multiplications in the 1-D kernel. - * cK represents sqrt(2) * cos(K*pi/28). - */ - -GLOBAL(void) -jpeg_idct_14x14 (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, - JSAMPARRAY output_buf, JDIMENSION output_col) -{ - INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15, tmp16; - INT32 tmp20, tmp21, tmp22, tmp23, tmp24, tmp25, tmp26; - INT32 z1, z2, z3, z4; - JCOEFPTR inptr; - ISLOW_MULT_TYPE * quantptr; - int * wsptr; - JSAMPROW outptr; - JSAMPLE *range_limit = IDCT_range_limit(cinfo); - int ctr; - int workspace[8*14]; /* buffers data between passes */ - SHIFT_TEMPS - - /* Pass 1: process columns from input, store into work array. */ - - inptr = coef_block; - quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; - wsptr = workspace; - for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) { - /* Even part */ - - z1 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); - z1 <<= CONST_BITS; - /* Add fudge factor here for final descale. */ - z1 += ONE << (CONST_BITS-PASS1_BITS-1); - z4 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); - z2 = MULTIPLY(z4, FIX(1.274162392)); /* c4 */ - z3 = MULTIPLY(z4, FIX(0.314692123)); /* c12 */ - z4 = MULTIPLY(z4, FIX(0.881747734)); /* c8 */ - - tmp10 = z1 + z2; - tmp11 = z1 + z3; - tmp12 = z1 - z4; - - tmp23 = RIGHT_SHIFT(z1 - ((z2 + z3 - z4) << 1), /* c0 = (c4+c12-c8)*2 */ - CONST_BITS-PASS1_BITS); - - z1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); - z2 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); - - z3 = MULTIPLY(z1 + z2, FIX(1.105676686)); /* c6 */ - - tmp13 = z3 + MULTIPLY(z1, FIX(0.273079590)); /* c2-c6 */ - tmp14 = z3 - MULTIPLY(z2, FIX(1.719280954)); /* c6+c10 */ - tmp15 = MULTIPLY(z1, FIX(0.613604268)) - /* c10 */ - MULTIPLY(z2, FIX(1.378756276)); /* c2 */ - - tmp20 = tmp10 + tmp13; - tmp26 = tmp10 - tmp13; - tmp21 = tmp11 + tmp14; - tmp25 = tmp11 - tmp14; - tmp22 = tmp12 + tmp15; - tmp24 = tmp12 - tmp15; - - /* Odd part */ - - z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); - z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); - z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); - z4 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); - tmp13 = z4 << CONST_BITS; - - tmp14 = z1 + z3; - tmp11 = MULTIPLY(z1 + z2, FIX(1.334852607)); /* c3 */ - tmp12 = MULTIPLY(tmp14, FIX(1.197448846)); /* c5 */ - tmp10 = tmp11 + tmp12 + tmp13 - MULTIPLY(z1, FIX(1.126980169)); /* c3+c5-c1 */ - tmp14 = MULTIPLY(tmp14, FIX(0.752406978)); /* c9 */ - tmp16 = tmp14 - MULTIPLY(z1, FIX(1.061150426)); /* c9+c11-c13 */ - z1 -= z2; - tmp15 = MULTIPLY(z1, FIX(0.467085129)) - tmp13; /* c11 */ - tmp16 += tmp15; - z1 += z4; - z4 = MULTIPLY(z2 + z3, - FIX(0.158341681)) - tmp13; /* -c13 */ - tmp11 += z4 - MULTIPLY(z2, FIX(0.424103948)); /* c3-c9-c13 */ - tmp12 += z4 - MULTIPLY(z3, FIX(2.373959773)); /* c3+c5-c13 */ - z4 = MULTIPLY(z3 - z2, FIX(1.405321284)); /* c1 */ - tmp14 += z4 + tmp13 - MULTIPLY(z3, FIX(1.6906431334)); /* c1+c9-c11 */ - tmp15 += z4 + MULTIPLY(z2, FIX(0.674957567)); /* c1+c11-c5 */ - - tmp13 = (z1 - z3) << PASS1_BITS; - - /* Final output stage */ - - wsptr[8*0] = (int) RIGHT_SHIFT(tmp20 + tmp10, CONST_BITS-PASS1_BITS); - wsptr[8*13] = (int) RIGHT_SHIFT(tmp20 - tmp10, CONST_BITS-PASS1_BITS); - wsptr[8*1] = (int) RIGHT_SHIFT(tmp21 + tmp11, CONST_BITS-PASS1_BITS); - wsptr[8*12] = (int) RIGHT_SHIFT(tmp21 - tmp11, CONST_BITS-PASS1_BITS); - wsptr[8*2] = (int) RIGHT_SHIFT(tmp22 + tmp12, CONST_BITS-PASS1_BITS); - wsptr[8*11] = (int) RIGHT_SHIFT(tmp22 - tmp12, CONST_BITS-PASS1_BITS); - wsptr[8*3] = (int) (tmp23 + tmp13); - wsptr[8*10] = (int) (tmp23 - tmp13); - wsptr[8*4] = (int) RIGHT_SHIFT(tmp24 + tmp14, CONST_BITS-PASS1_BITS); - wsptr[8*9] = (int) RIGHT_SHIFT(tmp24 - tmp14, CONST_BITS-PASS1_BITS); - wsptr[8*5] = (int) RIGHT_SHIFT(tmp25 + tmp15, CONST_BITS-PASS1_BITS); - wsptr[8*8] = (int) RIGHT_SHIFT(tmp25 - tmp15, CONST_BITS-PASS1_BITS); - wsptr[8*6] = (int) RIGHT_SHIFT(tmp26 + tmp16, CONST_BITS-PASS1_BITS); - wsptr[8*7] = (int) RIGHT_SHIFT(tmp26 - tmp16, CONST_BITS-PASS1_BITS); - } - - /* Pass 2: process 14 rows from work array, store into output array. */ - - wsptr = workspace; - for (ctr = 0; ctr < 14; ctr++) { - outptr = output_buf[ctr] + output_col; - - /* Even part */ - - /* Add fudge factor here for final descale. */ - z1 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); - z1 <<= CONST_BITS; - z4 = (INT32) wsptr[4]; - z2 = MULTIPLY(z4, FIX(1.274162392)); /* c4 */ - z3 = MULTIPLY(z4, FIX(0.314692123)); /* c12 */ - z4 = MULTIPLY(z4, FIX(0.881747734)); /* c8 */ - - tmp10 = z1 + z2; - tmp11 = z1 + z3; - tmp12 = z1 - z4; - - tmp23 = z1 - ((z2 + z3 - z4) << 1); /* c0 = (c4+c12-c8)*2 */ - - z1 = (INT32) wsptr[2]; - z2 = (INT32) wsptr[6]; - - z3 = MULTIPLY(z1 + z2, FIX(1.105676686)); /* c6 */ - - tmp13 = z3 + MULTIPLY(z1, FIX(0.273079590)); /* c2-c6 */ - tmp14 = z3 - MULTIPLY(z2, FIX(1.719280954)); /* c6+c10 */ - tmp15 = MULTIPLY(z1, FIX(0.613604268)) - /* c10 */ - MULTIPLY(z2, FIX(1.378756276)); /* c2 */ - - tmp20 = tmp10 + tmp13; - tmp26 = tmp10 - tmp13; - tmp21 = tmp11 + tmp14; - tmp25 = tmp11 - tmp14; - tmp22 = tmp12 + tmp15; - tmp24 = tmp12 - tmp15; - - /* Odd part */ - - z1 = (INT32) wsptr[1]; - z2 = (INT32) wsptr[3]; - z3 = (INT32) wsptr[5]; - z4 = (INT32) wsptr[7]; - z4 <<= CONST_BITS; - - tmp14 = z1 + z3; - tmp11 = MULTIPLY(z1 + z2, FIX(1.334852607)); /* c3 */ - tmp12 = MULTIPLY(tmp14, FIX(1.197448846)); /* c5 */ - tmp10 = tmp11 + tmp12 + z4 - MULTIPLY(z1, FIX(1.126980169)); /* c3+c5-c1 */ - tmp14 = MULTIPLY(tmp14, FIX(0.752406978)); /* c9 */ - tmp16 = tmp14 - MULTIPLY(z1, FIX(1.061150426)); /* c9+c11-c13 */ - z1 -= z2; - tmp15 = MULTIPLY(z1, FIX(0.467085129)) - z4; /* c11 */ - tmp16 += tmp15; - tmp13 = MULTIPLY(z2 + z3, - FIX(0.158341681)) - z4; /* -c13 */ - tmp11 += tmp13 - MULTIPLY(z2, FIX(0.424103948)); /* c3-c9-c13 */ - tmp12 += tmp13 - MULTIPLY(z3, FIX(2.373959773)); /* c3+c5-c13 */ - tmp13 = MULTIPLY(z3 - z2, FIX(1.405321284)); /* c1 */ - tmp14 += tmp13 + z4 - MULTIPLY(z3, FIX(1.6906431334)); /* c1+c9-c11 */ - tmp15 += tmp13 + MULTIPLY(z2, FIX(0.674957567)); /* c1+c11-c5 */ - - tmp13 = ((z1 - z3) << CONST_BITS) + z4; - - /* Final output stage */ - - outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp10, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[13] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp10, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp11, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[12] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp11, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp12, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[11] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp12, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp23 + tmp13, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[10] = range_limit[(int) RIGHT_SHIFT(tmp23 - tmp13, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp24 + tmp14, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[9] = range_limit[(int) RIGHT_SHIFT(tmp24 - tmp14, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp25 + tmp15, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[8] = range_limit[(int) RIGHT_SHIFT(tmp25 - tmp15, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp26 + tmp16, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp26 - tmp16, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - - wsptr += 8; /* advance pointer to next row */ - } -} - - -/* - * Perform dequantization and inverse DCT on one block of coefficients, - * producing a 15x15 output block. - * - * Optimized algorithm with 22 multiplications in the 1-D kernel. - * cK represents sqrt(2) * cos(K*pi/30). - */ - -GLOBAL(void) -jpeg_idct_15x15 (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, - JSAMPARRAY output_buf, JDIMENSION output_col) -{ - INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15, tmp16; - INT32 tmp20, tmp21, tmp22, tmp23, tmp24, tmp25, tmp26, tmp27; - INT32 z1, z2, z3, z4; - JCOEFPTR inptr; - ISLOW_MULT_TYPE * quantptr; - int * wsptr; - JSAMPROW outptr; - JSAMPLE *range_limit = IDCT_range_limit(cinfo); - int ctr; - int workspace[8*15]; /* buffers data between passes */ - SHIFT_TEMPS - - /* Pass 1: process columns from input, store into work array. */ - - inptr = coef_block; - quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; - wsptr = workspace; - for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) { - /* Even part */ - - z1 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); - z1 <<= CONST_BITS; - /* Add fudge factor here for final descale. */ - z1 += ONE << (CONST_BITS-PASS1_BITS-1); - - z2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); - z3 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); - z4 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); - - tmp10 = MULTIPLY(z4, FIX(0.437016024)); /* c12 */ - tmp11 = MULTIPLY(z4, FIX(1.144122806)); /* c6 */ - - tmp12 = z1 - tmp10; - tmp13 = z1 + tmp11; - z1 -= (tmp11 - tmp10) << 1; /* c0 = (c6-c12)*2 */ - - z4 = z2 - z3; - z3 += z2; - tmp10 = MULTIPLY(z3, FIX(1.337628990)); /* (c2+c4)/2 */ - tmp11 = MULTIPLY(z4, FIX(0.045680613)); /* (c2-c4)/2 */ - z2 = MULTIPLY(z2, FIX(1.439773946)); /* c4+c14 */ - - tmp20 = tmp13 + tmp10 + tmp11; - tmp23 = tmp12 - tmp10 + tmp11 + z2; - - tmp10 = MULTIPLY(z3, FIX(0.547059574)); /* (c8+c14)/2 */ - tmp11 = MULTIPLY(z4, FIX(0.399234004)); /* (c8-c14)/2 */ - - tmp25 = tmp13 - tmp10 - tmp11; - tmp26 = tmp12 + tmp10 - tmp11 - z2; - - tmp10 = MULTIPLY(z3, FIX(0.790569415)); /* (c6+c12)/2 */ - tmp11 = MULTIPLY(z4, FIX(0.353553391)); /* (c6-c12)/2 */ - - tmp21 = tmp12 + tmp10 + tmp11; - tmp24 = tmp13 - tmp10 + tmp11; - tmp11 += tmp11; - tmp22 = z1 + tmp11; /* c10 = c6-c12 */ - tmp27 = z1 - tmp11 - tmp11; /* c0 = (c6-c12)*2 */ - - /* Odd part */ - - z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); - z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); - z4 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); - z3 = MULTIPLY(z4, FIX(1.224744871)); /* c5 */ - z4 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); - - tmp13 = z2 - z4; - tmp15 = MULTIPLY(z1 + tmp13, FIX(0.831253876)); /* c9 */ - tmp11 = tmp15 + MULTIPLY(z1, FIX(0.513743148)); /* c3-c9 */ - tmp14 = tmp15 - MULTIPLY(tmp13, FIX(2.176250899)); /* c3+c9 */ - - tmp13 = MULTIPLY(z2, - FIX(0.831253876)); /* -c9 */ - tmp15 = MULTIPLY(z2, - FIX(1.344997024)); /* -c3 */ - z2 = z1 - z4; - tmp12 = z3 + MULTIPLY(z2, FIX(1.406466353)); /* c1 */ - - tmp10 = tmp12 + MULTIPLY(z4, FIX(2.457431844)) - tmp15; /* c1+c7 */ - tmp16 = tmp12 - MULTIPLY(z1, FIX(1.112434820)) + tmp13; /* c1-c13 */ - tmp12 = MULTIPLY(z2, FIX(1.224744871)) - z3; /* c5 */ - z2 = MULTIPLY(z1 + z4, FIX(0.575212477)); /* c11 */ - tmp13 += z2 + MULTIPLY(z1, FIX(0.475753014)) - z3; /* c7-c11 */ - tmp15 += z2 - MULTIPLY(z4, FIX(0.869244010)) + z3; /* c11+c13 */ - - /* Final output stage */ - - wsptr[8*0] = (int) RIGHT_SHIFT(tmp20 + tmp10, CONST_BITS-PASS1_BITS); - wsptr[8*14] = (int) RIGHT_SHIFT(tmp20 - tmp10, CONST_BITS-PASS1_BITS); - wsptr[8*1] = (int) RIGHT_SHIFT(tmp21 + tmp11, CONST_BITS-PASS1_BITS); - wsptr[8*13] = (int) RIGHT_SHIFT(tmp21 - tmp11, CONST_BITS-PASS1_BITS); - wsptr[8*2] = (int) RIGHT_SHIFT(tmp22 + tmp12, CONST_BITS-PASS1_BITS); - wsptr[8*12] = (int) RIGHT_SHIFT(tmp22 - tmp12, CONST_BITS-PASS1_BITS); - wsptr[8*3] = (int) RIGHT_SHIFT(tmp23 + tmp13, CONST_BITS-PASS1_BITS); - wsptr[8*11] = (int) RIGHT_SHIFT(tmp23 - tmp13, CONST_BITS-PASS1_BITS); - wsptr[8*4] = (int) RIGHT_SHIFT(tmp24 + tmp14, CONST_BITS-PASS1_BITS); - wsptr[8*10] = (int) RIGHT_SHIFT(tmp24 - tmp14, CONST_BITS-PASS1_BITS); - wsptr[8*5] = (int) RIGHT_SHIFT(tmp25 + tmp15, CONST_BITS-PASS1_BITS); - wsptr[8*9] = (int) RIGHT_SHIFT(tmp25 - tmp15, CONST_BITS-PASS1_BITS); - wsptr[8*6] = (int) RIGHT_SHIFT(tmp26 + tmp16, CONST_BITS-PASS1_BITS); - wsptr[8*8] = (int) RIGHT_SHIFT(tmp26 - tmp16, CONST_BITS-PASS1_BITS); - wsptr[8*7] = (int) RIGHT_SHIFT(tmp27, CONST_BITS-PASS1_BITS); - } - - /* Pass 2: process 15 rows from work array, store into output array. */ - - wsptr = workspace; - for (ctr = 0; ctr < 15; ctr++) { - outptr = output_buf[ctr] + output_col; - - /* Even part */ - - /* Add fudge factor here for final descale. */ - z1 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); - z1 <<= CONST_BITS; - - z2 = (INT32) wsptr[2]; - z3 = (INT32) wsptr[4]; - z4 = (INT32) wsptr[6]; - - tmp10 = MULTIPLY(z4, FIX(0.437016024)); /* c12 */ - tmp11 = MULTIPLY(z4, FIX(1.144122806)); /* c6 */ - - tmp12 = z1 - tmp10; - tmp13 = z1 + tmp11; - z1 -= (tmp11 - tmp10) << 1; /* c0 = (c6-c12)*2 */ - - z4 = z2 - z3; - z3 += z2; - tmp10 = MULTIPLY(z3, FIX(1.337628990)); /* (c2+c4)/2 */ - tmp11 = MULTIPLY(z4, FIX(0.045680613)); /* (c2-c4)/2 */ - z2 = MULTIPLY(z2, FIX(1.439773946)); /* c4+c14 */ - - tmp20 = tmp13 + tmp10 + tmp11; - tmp23 = tmp12 - tmp10 + tmp11 + z2; - - tmp10 = MULTIPLY(z3, FIX(0.547059574)); /* (c8+c14)/2 */ - tmp11 = MULTIPLY(z4, FIX(0.399234004)); /* (c8-c14)/2 */ - - tmp25 = tmp13 - tmp10 - tmp11; - tmp26 = tmp12 + tmp10 - tmp11 - z2; - - tmp10 = MULTIPLY(z3, FIX(0.790569415)); /* (c6+c12)/2 */ - tmp11 = MULTIPLY(z4, FIX(0.353553391)); /* (c6-c12)/2 */ - - tmp21 = tmp12 + tmp10 + tmp11; - tmp24 = tmp13 - tmp10 + tmp11; - tmp11 += tmp11; - tmp22 = z1 + tmp11; /* c10 = c6-c12 */ - tmp27 = z1 - tmp11 - tmp11; /* c0 = (c6-c12)*2 */ - - /* Odd part */ - - z1 = (INT32) wsptr[1]; - z2 = (INT32) wsptr[3]; - z4 = (INT32) wsptr[5]; - z3 = MULTIPLY(z4, FIX(1.224744871)); /* c5 */ - z4 = (INT32) wsptr[7]; - - tmp13 = z2 - z4; - tmp15 = MULTIPLY(z1 + tmp13, FIX(0.831253876)); /* c9 */ - tmp11 = tmp15 + MULTIPLY(z1, FIX(0.513743148)); /* c3-c9 */ - tmp14 = tmp15 - MULTIPLY(tmp13, FIX(2.176250899)); /* c3+c9 */ - - tmp13 = MULTIPLY(z2, - FIX(0.831253876)); /* -c9 */ - tmp15 = MULTIPLY(z2, - FIX(1.344997024)); /* -c3 */ - z2 = z1 - z4; - tmp12 = z3 + MULTIPLY(z2, FIX(1.406466353)); /* c1 */ - - tmp10 = tmp12 + MULTIPLY(z4, FIX(2.457431844)) - tmp15; /* c1+c7 */ - tmp16 = tmp12 - MULTIPLY(z1, FIX(1.112434820)) + tmp13; /* c1-c13 */ - tmp12 = MULTIPLY(z2, FIX(1.224744871)) - z3; /* c5 */ - z2 = MULTIPLY(z1 + z4, FIX(0.575212477)); /* c11 */ - tmp13 += z2 + MULTIPLY(z1, FIX(0.475753014)) - z3; /* c7-c11 */ - tmp15 += z2 - MULTIPLY(z4, FIX(0.869244010)) + z3; /* c11+c13 */ - - /* Final output stage */ - - outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp10, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[14] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp10, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp11, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[13] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp11, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp12, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[12] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp12, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp23 + tmp13, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[11] = range_limit[(int) RIGHT_SHIFT(tmp23 - tmp13, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp24 + tmp14, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[10] = range_limit[(int) RIGHT_SHIFT(tmp24 - tmp14, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp25 + tmp15, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[9] = range_limit[(int) RIGHT_SHIFT(tmp25 - tmp15, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp26 + tmp16, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[8] = range_limit[(int) RIGHT_SHIFT(tmp26 - tmp16, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp27, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - - wsptr += 8; /* advance pointer to next row */ - } -} - - -/* - * Perform dequantization and inverse DCT on one block of coefficients, - * producing a 16x16 output block. - * - * Optimized algorithm with 28 multiplications in the 1-D kernel. - * cK represents sqrt(2) * cos(K*pi/32). - */ - -GLOBAL(void) -jpeg_idct_16x16 (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, - JSAMPARRAY output_buf, JDIMENSION output_col) -{ - INT32 tmp0, tmp1, tmp2, tmp3, tmp10, tmp11, tmp12, tmp13; - INT32 tmp20, tmp21, tmp22, tmp23, tmp24, tmp25, tmp26, tmp27; - INT32 z1, z2, z3, z4; - JCOEFPTR inptr; - ISLOW_MULT_TYPE * quantptr; - int * wsptr; - JSAMPROW outptr; - JSAMPLE *range_limit = IDCT_range_limit(cinfo); - int ctr; - int workspace[8*16]; /* buffers data between passes */ - SHIFT_TEMPS - - /* Pass 1: process columns from input, store into work array. */ - - inptr = coef_block; - quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; - wsptr = workspace; - for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) { - /* Even part */ - - tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); - tmp0 <<= CONST_BITS; - /* Add fudge factor here for final descale. */ - tmp0 += 1 << (CONST_BITS-PASS1_BITS-1); - - z1 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); - tmp1 = MULTIPLY(z1, FIX(1.306562965)); /* c4[16] = c2[8] */ - tmp2 = MULTIPLY(z1, FIX_0_541196100); /* c12[16] = c6[8] */ - - tmp10 = tmp0 + tmp1; - tmp11 = tmp0 - tmp1; - tmp12 = tmp0 + tmp2; - tmp13 = tmp0 - tmp2; - - z1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); - z2 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); - z3 = z1 - z2; - z4 = MULTIPLY(z3, FIX(0.275899379)); /* c14[16] = c7[8] */ - z3 = MULTIPLY(z3, FIX(1.387039845)); /* c2[16] = c1[8] */ - - tmp0 = z3 + MULTIPLY(z2, FIX_2_562915447); /* (c6+c2)[16] = (c3+c1)[8] */ - tmp1 = z4 + MULTIPLY(z1, FIX_0_899976223); /* (c6-c14)[16] = (c3-c7)[8] */ - tmp2 = z3 - MULTIPLY(z1, FIX(0.601344887)); /* (c2-c10)[16] = (c1-c5)[8] */ - tmp3 = z4 - MULTIPLY(z2, FIX(0.509795579)); /* (c10-c14)[16] = (c5-c7)[8] */ - - tmp20 = tmp10 + tmp0; - tmp27 = tmp10 - tmp0; - tmp21 = tmp12 + tmp1; - tmp26 = tmp12 - tmp1; - tmp22 = tmp13 + tmp2; - tmp25 = tmp13 - tmp2; - tmp23 = tmp11 + tmp3; - tmp24 = tmp11 - tmp3; - - /* Odd part */ - - z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); - z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); - z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); - z4 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); - - tmp11 = z1 + z3; - - tmp1 = MULTIPLY(z1 + z2, FIX(1.353318001)); /* c3 */ - tmp2 = MULTIPLY(tmp11, FIX(1.247225013)); /* c5 */ - tmp3 = MULTIPLY(z1 + z4, FIX(1.093201867)); /* c7 */ - tmp10 = MULTIPLY(z1 - z4, FIX(0.897167586)); /* c9 */ - tmp11 = MULTIPLY(tmp11, FIX(0.666655658)); /* c11 */ - tmp12 = MULTIPLY(z1 - z2, FIX(0.410524528)); /* c13 */ - tmp0 = tmp1 + tmp2 + tmp3 - - MULTIPLY(z1, FIX(2.286341144)); /* c7+c5+c3-c1 */ - tmp13 = tmp10 + tmp11 + tmp12 - - MULTIPLY(z1, FIX(1.835730603)); /* c9+c11+c13-c15 */ - z1 = MULTIPLY(z2 + z3, FIX(0.138617169)); /* c15 */ - tmp1 += z1 + MULTIPLY(z2, FIX(0.071888074)); /* c9+c11-c3-c15 */ - tmp2 += z1 - MULTIPLY(z3, FIX(1.125726048)); /* c5+c7+c15-c3 */ - z1 = MULTIPLY(z3 - z2, FIX(1.407403738)); /* c1 */ - tmp11 += z1 - MULTIPLY(z3, FIX(0.766367282)); /* c1+c11-c9-c13 */ - tmp12 += z1 + MULTIPLY(z2, FIX(1.971951411)); /* c1+c5+c13-c7 */ - z2 += z4; - z1 = MULTIPLY(z2, - FIX(0.666655658)); /* -c11 */ - tmp1 += z1; - tmp3 += z1 + MULTIPLY(z4, FIX(1.065388962)); /* c3+c11+c15-c7 */ - z2 = MULTIPLY(z2, - FIX(1.247225013)); /* -c5 */ - tmp10 += z2 + MULTIPLY(z4, FIX(3.141271809)); /* c1+c5+c9-c13 */ - tmp12 += z2; - z2 = MULTIPLY(z3 + z4, - FIX(1.353318001)); /* -c3 */ - tmp2 += z2; - tmp3 += z2; - z2 = MULTIPLY(z4 - z3, FIX(0.410524528)); /* c13 */ - tmp10 += z2; - tmp11 += z2; - - /* Final output stage */ - - wsptr[8*0] = (int) RIGHT_SHIFT(tmp20 + tmp0, CONST_BITS-PASS1_BITS); - wsptr[8*15] = (int) RIGHT_SHIFT(tmp20 - tmp0, CONST_BITS-PASS1_BITS); - wsptr[8*1] = (int) RIGHT_SHIFT(tmp21 + tmp1, CONST_BITS-PASS1_BITS); - wsptr[8*14] = (int) RIGHT_SHIFT(tmp21 - tmp1, CONST_BITS-PASS1_BITS); - wsptr[8*2] = (int) RIGHT_SHIFT(tmp22 + tmp2, CONST_BITS-PASS1_BITS); - wsptr[8*13] = (int) RIGHT_SHIFT(tmp22 - tmp2, CONST_BITS-PASS1_BITS); - wsptr[8*3] = (int) RIGHT_SHIFT(tmp23 + tmp3, CONST_BITS-PASS1_BITS); - wsptr[8*12] = (int) RIGHT_SHIFT(tmp23 - tmp3, CONST_BITS-PASS1_BITS); - wsptr[8*4] = (int) RIGHT_SHIFT(tmp24 + tmp10, CONST_BITS-PASS1_BITS); - wsptr[8*11] = (int) RIGHT_SHIFT(tmp24 - tmp10, CONST_BITS-PASS1_BITS); - wsptr[8*5] = (int) RIGHT_SHIFT(tmp25 + tmp11, CONST_BITS-PASS1_BITS); - wsptr[8*10] = (int) RIGHT_SHIFT(tmp25 - tmp11, CONST_BITS-PASS1_BITS); - wsptr[8*6] = (int) RIGHT_SHIFT(tmp26 + tmp12, CONST_BITS-PASS1_BITS); - wsptr[8*9] = (int) RIGHT_SHIFT(tmp26 - tmp12, CONST_BITS-PASS1_BITS); - wsptr[8*7] = (int) RIGHT_SHIFT(tmp27 + tmp13, CONST_BITS-PASS1_BITS); - wsptr[8*8] = (int) RIGHT_SHIFT(tmp27 - tmp13, CONST_BITS-PASS1_BITS); - } - - /* Pass 2: process 16 rows from work array, store into output array. */ - - wsptr = workspace; - for (ctr = 0; ctr < 16; ctr++) { - outptr = output_buf[ctr] + output_col; - - /* Even part */ - - /* Add fudge factor here for final descale. */ - tmp0 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); - tmp0 <<= CONST_BITS; - - z1 = (INT32) wsptr[4]; - tmp1 = MULTIPLY(z1, FIX(1.306562965)); /* c4[16] = c2[8] */ - tmp2 = MULTIPLY(z1, FIX_0_541196100); /* c12[16] = c6[8] */ - - tmp10 = tmp0 + tmp1; - tmp11 = tmp0 - tmp1; - tmp12 = tmp0 + tmp2; - tmp13 = tmp0 - tmp2; - - z1 = (INT32) wsptr[2]; - z2 = (INT32) wsptr[6]; - z3 = z1 - z2; - z4 = MULTIPLY(z3, FIX(0.275899379)); /* c14[16] = c7[8] */ - z3 = MULTIPLY(z3, FIX(1.387039845)); /* c2[16] = c1[8] */ - - tmp0 = z3 + MULTIPLY(z2, FIX_2_562915447); /* (c6+c2)[16] = (c3+c1)[8] */ - tmp1 = z4 + MULTIPLY(z1, FIX_0_899976223); /* (c6-c14)[16] = (c3-c7)[8] */ - tmp2 = z3 - MULTIPLY(z1, FIX(0.601344887)); /* (c2-c10)[16] = (c1-c5)[8] */ - tmp3 = z4 - MULTIPLY(z2, FIX(0.509795579)); /* (c10-c14)[16] = (c5-c7)[8] */ - - tmp20 = tmp10 + tmp0; - tmp27 = tmp10 - tmp0; - tmp21 = tmp12 + tmp1; - tmp26 = tmp12 - tmp1; - tmp22 = tmp13 + tmp2; - tmp25 = tmp13 - tmp2; - tmp23 = tmp11 + tmp3; - tmp24 = tmp11 - tmp3; - - /* Odd part */ - - z1 = (INT32) wsptr[1]; - z2 = (INT32) wsptr[3]; - z3 = (INT32) wsptr[5]; - z4 = (INT32) wsptr[7]; - - tmp11 = z1 + z3; - - tmp1 = MULTIPLY(z1 + z2, FIX(1.353318001)); /* c3 */ - tmp2 = MULTIPLY(tmp11, FIX(1.247225013)); /* c5 */ - tmp3 = MULTIPLY(z1 + z4, FIX(1.093201867)); /* c7 */ - tmp10 = MULTIPLY(z1 - z4, FIX(0.897167586)); /* c9 */ - tmp11 = MULTIPLY(tmp11, FIX(0.666655658)); /* c11 */ - tmp12 = MULTIPLY(z1 - z2, FIX(0.410524528)); /* c13 */ - tmp0 = tmp1 + tmp2 + tmp3 - - MULTIPLY(z1, FIX(2.286341144)); /* c7+c5+c3-c1 */ - tmp13 = tmp10 + tmp11 + tmp12 - - MULTIPLY(z1, FIX(1.835730603)); /* c9+c11+c13-c15 */ - z1 = MULTIPLY(z2 + z3, FIX(0.138617169)); /* c15 */ - tmp1 += z1 + MULTIPLY(z2, FIX(0.071888074)); /* c9+c11-c3-c15 */ - tmp2 += z1 - MULTIPLY(z3, FIX(1.125726048)); /* c5+c7+c15-c3 */ - z1 = MULTIPLY(z3 - z2, FIX(1.407403738)); /* c1 */ - tmp11 += z1 - MULTIPLY(z3, FIX(0.766367282)); /* c1+c11-c9-c13 */ - tmp12 += z1 + MULTIPLY(z2, FIX(1.971951411)); /* c1+c5+c13-c7 */ - z2 += z4; - z1 = MULTIPLY(z2, - FIX(0.666655658)); /* -c11 */ - tmp1 += z1; - tmp3 += z1 + MULTIPLY(z4, FIX(1.065388962)); /* c3+c11+c15-c7 */ - z2 = MULTIPLY(z2, - FIX(1.247225013)); /* -c5 */ - tmp10 += z2 + MULTIPLY(z4, FIX(3.141271809)); /* c1+c5+c9-c13 */ - tmp12 += z2; - z2 = MULTIPLY(z3 + z4, - FIX(1.353318001)); /* -c3 */ - tmp2 += z2; - tmp3 += z2; - z2 = MULTIPLY(z4 - z3, FIX(0.410524528)); /* c13 */ - tmp10 += z2; - tmp11 += z2; - - /* Final output stage */ - - outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp0, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[15] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp0, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp1, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[14] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp1, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp2, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[13] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp2, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp23 + tmp3, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[12] = range_limit[(int) RIGHT_SHIFT(tmp23 - tmp3, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp24 + tmp10, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[11] = range_limit[(int) RIGHT_SHIFT(tmp24 - tmp10, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp25 + tmp11, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[10] = range_limit[(int) RIGHT_SHIFT(tmp25 - tmp11, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp26 + tmp12, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[9] = range_limit[(int) RIGHT_SHIFT(tmp26 - tmp12, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp27 + tmp13, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[8] = range_limit[(int) RIGHT_SHIFT(tmp27 - tmp13, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - - wsptr += 8; /* advance pointer to next row */ - } -} - - -/* - * Perform dequantization and inverse DCT on one block of coefficients, - * producing a 16x8 output block. - * - * 8-point IDCT in pass 1 (columns), 16-point in pass 2 (rows). - */ - -GLOBAL(void) -jpeg_idct_16x8 (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, - JSAMPARRAY output_buf, JDIMENSION output_col) -{ - INT32 tmp0, tmp1, tmp2, tmp3, tmp10, tmp11, tmp12, tmp13; - INT32 tmp20, tmp21, tmp22, tmp23, tmp24, tmp25, tmp26, tmp27; - INT32 z1, z2, z3, z4; - JCOEFPTR inptr; - ISLOW_MULT_TYPE * quantptr; - int * wsptr; - JSAMPROW outptr; - JSAMPLE *range_limit = IDCT_range_limit(cinfo); - int ctr; - int workspace[8*8]; /* buffers data between passes */ - SHIFT_TEMPS - - /* Pass 1: process columns from input, store into work array. */ - /* Note results are scaled up by sqrt(8) compared to a true IDCT; */ - /* furthermore, we scale the results by 2**PASS1_BITS. */ - - inptr = coef_block; - quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; - wsptr = workspace; - for (ctr = DCTSIZE; ctr > 0; ctr--) { - /* Due to quantization, we will usually find that many of the input - * coefficients are zero, especially the AC terms. We can exploit this - * by short-circuiting the IDCT calculation for any column in which all - * the AC terms are zero. In that case each output is equal to the - * DC coefficient (with scale factor as needed). - * With typical images and quantization tables, half or more of the - * column DCT calculations can be simplified this way. - */ - - if (inptr[DCTSIZE*1] == 0 && inptr[DCTSIZE*2] == 0 && - inptr[DCTSIZE*3] == 0 && inptr[DCTSIZE*4] == 0 && - inptr[DCTSIZE*5] == 0 && inptr[DCTSIZE*6] == 0 && - inptr[DCTSIZE*7] == 0) { - /* AC terms all zero */ - int dcval = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]) << PASS1_BITS; - - wsptr[DCTSIZE*0] = dcval; - wsptr[DCTSIZE*1] = dcval; - wsptr[DCTSIZE*2] = dcval; - wsptr[DCTSIZE*3] = dcval; - wsptr[DCTSIZE*4] = dcval; - wsptr[DCTSIZE*5] = dcval; - wsptr[DCTSIZE*6] = dcval; - wsptr[DCTSIZE*7] = dcval; - - inptr++; /* advance pointers to next column */ - quantptr++; - wsptr++; - continue; - } - - /* Even part: reverse the even part of the forward DCT. */ - /* The rotator is sqrt(2)*c(-6). */ - - z2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); - z3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); - - z1 = MULTIPLY(z2 + z3, FIX_0_541196100); - tmp2 = z1 + MULTIPLY(z2, FIX_0_765366865); - tmp3 = z1 - MULTIPLY(z3, FIX_1_847759065); - - z2 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); - z3 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); - z2 <<= CONST_BITS; - z3 <<= CONST_BITS; - /* Add fudge factor here for final descale. */ - z2 += ONE << (CONST_BITS-PASS1_BITS-1); - - tmp0 = z2 + z3; - tmp1 = z2 - z3; - - tmp10 = tmp0 + tmp2; - tmp13 = tmp0 - tmp2; - tmp11 = tmp1 + tmp3; - tmp12 = tmp1 - tmp3; - - /* Odd part per figure 8; the matrix is unitary and hence its - * transpose is its inverse. i0..i3 are y7,y5,y3,y1 respectively. - */ - - tmp0 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); - tmp1 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); - tmp2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); - tmp3 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); - - z2 = tmp0 + tmp2; - z3 = tmp1 + tmp3; - - z1 = MULTIPLY(z2 + z3, FIX_1_175875602); /* sqrt(2) * c3 */ - z2 = MULTIPLY(z2, - FIX_1_961570560); /* sqrt(2) * (-c3-c5) */ - z3 = MULTIPLY(z3, - FIX_0_390180644); /* sqrt(2) * (c5-c3) */ - z2 += z1; - z3 += z1; - - z1 = MULTIPLY(tmp0 + tmp3, - FIX_0_899976223); /* sqrt(2) * (c7-c3) */ - tmp0 = MULTIPLY(tmp0, FIX_0_298631336); /* sqrt(2) * (-c1+c3+c5-c7) */ - tmp3 = MULTIPLY(tmp3, FIX_1_501321110); /* sqrt(2) * ( c1+c3-c5-c7) */ - tmp0 += z1 + z2; - tmp3 += z1 + z3; - - z1 = MULTIPLY(tmp1 + tmp2, - FIX_2_562915447); /* sqrt(2) * (-c1-c3) */ - tmp1 = MULTIPLY(tmp1, FIX_2_053119869); /* sqrt(2) * ( c1+c3-c5+c7) */ - tmp2 = MULTIPLY(tmp2, FIX_3_072711026); /* sqrt(2) * ( c1+c3+c5-c7) */ - tmp1 += z1 + z3; - tmp2 += z1 + z2; - - /* Final output stage: inputs are tmp10..tmp13, tmp0..tmp3 */ - - wsptr[DCTSIZE*0] = (int) RIGHT_SHIFT(tmp10 + tmp3, CONST_BITS-PASS1_BITS); - wsptr[DCTSIZE*7] = (int) RIGHT_SHIFT(tmp10 - tmp3, CONST_BITS-PASS1_BITS); - wsptr[DCTSIZE*1] = (int) RIGHT_SHIFT(tmp11 + tmp2, CONST_BITS-PASS1_BITS); - wsptr[DCTSIZE*6] = (int) RIGHT_SHIFT(tmp11 - tmp2, CONST_BITS-PASS1_BITS); - wsptr[DCTSIZE*2] = (int) RIGHT_SHIFT(tmp12 + tmp1, CONST_BITS-PASS1_BITS); - wsptr[DCTSIZE*5] = (int) RIGHT_SHIFT(tmp12 - tmp1, CONST_BITS-PASS1_BITS); - wsptr[DCTSIZE*3] = (int) RIGHT_SHIFT(tmp13 + tmp0, CONST_BITS-PASS1_BITS); - wsptr[DCTSIZE*4] = (int) RIGHT_SHIFT(tmp13 - tmp0, CONST_BITS-PASS1_BITS); - - inptr++; /* advance pointers to next column */ - quantptr++; - wsptr++; - } - - /* Pass 2: process 8 rows from work array, store into output array. - * 16-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/32). - */ - wsptr = workspace; - for (ctr = 0; ctr < 8; ctr++) { - outptr = output_buf[ctr] + output_col; - - /* Even part */ - - /* Add fudge factor here for final descale. */ - tmp0 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); - tmp0 <<= CONST_BITS; - - z1 = (INT32) wsptr[4]; - tmp1 = MULTIPLY(z1, FIX(1.306562965)); /* c4[16] = c2[8] */ - tmp2 = MULTIPLY(z1, FIX_0_541196100); /* c12[16] = c6[8] */ - - tmp10 = tmp0 + tmp1; - tmp11 = tmp0 - tmp1; - tmp12 = tmp0 + tmp2; - tmp13 = tmp0 - tmp2; - - z1 = (INT32) wsptr[2]; - z2 = (INT32) wsptr[6]; - z3 = z1 - z2; - z4 = MULTIPLY(z3, FIX(0.275899379)); /* c14[16] = c7[8] */ - z3 = MULTIPLY(z3, FIX(1.387039845)); /* c2[16] = c1[8] */ - - tmp0 = z3 + MULTIPLY(z2, FIX_2_562915447); /* (c6+c2)[16] = (c3+c1)[8] */ - tmp1 = z4 + MULTIPLY(z1, FIX_0_899976223); /* (c6-c14)[16] = (c3-c7)[8] */ - tmp2 = z3 - MULTIPLY(z1, FIX(0.601344887)); /* (c2-c10)[16] = (c1-c5)[8] */ - tmp3 = z4 - MULTIPLY(z2, FIX(0.509795579)); /* (c10-c14)[16] = (c5-c7)[8] */ - - tmp20 = tmp10 + tmp0; - tmp27 = tmp10 - tmp0; - tmp21 = tmp12 + tmp1; - tmp26 = tmp12 - tmp1; - tmp22 = tmp13 + tmp2; - tmp25 = tmp13 - tmp2; - tmp23 = tmp11 + tmp3; - tmp24 = tmp11 - tmp3; - - /* Odd part */ - - z1 = (INT32) wsptr[1]; - z2 = (INT32) wsptr[3]; - z3 = (INT32) wsptr[5]; - z4 = (INT32) wsptr[7]; - - tmp11 = z1 + z3; - - tmp1 = MULTIPLY(z1 + z2, FIX(1.353318001)); /* c3 */ - tmp2 = MULTIPLY(tmp11, FIX(1.247225013)); /* c5 */ - tmp3 = MULTIPLY(z1 + z4, FIX(1.093201867)); /* c7 */ - tmp10 = MULTIPLY(z1 - z4, FIX(0.897167586)); /* c9 */ - tmp11 = MULTIPLY(tmp11, FIX(0.666655658)); /* c11 */ - tmp12 = MULTIPLY(z1 - z2, FIX(0.410524528)); /* c13 */ - tmp0 = tmp1 + tmp2 + tmp3 - - MULTIPLY(z1, FIX(2.286341144)); /* c7+c5+c3-c1 */ - tmp13 = tmp10 + tmp11 + tmp12 - - MULTIPLY(z1, FIX(1.835730603)); /* c9+c11+c13-c15 */ - z1 = MULTIPLY(z2 + z3, FIX(0.138617169)); /* c15 */ - tmp1 += z1 + MULTIPLY(z2, FIX(0.071888074)); /* c9+c11-c3-c15 */ - tmp2 += z1 - MULTIPLY(z3, FIX(1.125726048)); /* c5+c7+c15-c3 */ - z1 = MULTIPLY(z3 - z2, FIX(1.407403738)); /* c1 */ - tmp11 += z1 - MULTIPLY(z3, FIX(0.766367282)); /* c1+c11-c9-c13 */ - tmp12 += z1 + MULTIPLY(z2, FIX(1.971951411)); /* c1+c5+c13-c7 */ - z2 += z4; - z1 = MULTIPLY(z2, - FIX(0.666655658)); /* -c11 */ - tmp1 += z1; - tmp3 += z1 + MULTIPLY(z4, FIX(1.065388962)); /* c3+c11+c15-c7 */ - z2 = MULTIPLY(z2, - FIX(1.247225013)); /* -c5 */ - tmp10 += z2 + MULTIPLY(z4, FIX(3.141271809)); /* c1+c5+c9-c13 */ - tmp12 += z2; - z2 = MULTIPLY(z3 + z4, - FIX(1.353318001)); /* -c3 */ - tmp2 += z2; - tmp3 += z2; - z2 = MULTIPLY(z4 - z3, FIX(0.410524528)); /* c13 */ - tmp10 += z2; - tmp11 += z2; - - /* Final output stage */ - - outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp0, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[15] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp0, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp1, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[14] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp1, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp2, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[13] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp2, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp23 + tmp3, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[12] = range_limit[(int) RIGHT_SHIFT(tmp23 - tmp3, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp24 + tmp10, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[11] = range_limit[(int) RIGHT_SHIFT(tmp24 - tmp10, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp25 + tmp11, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[10] = range_limit[(int) RIGHT_SHIFT(tmp25 - tmp11, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp26 + tmp12, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[9] = range_limit[(int) RIGHT_SHIFT(tmp26 - tmp12, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp27 + tmp13, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[8] = range_limit[(int) RIGHT_SHIFT(tmp27 - tmp13, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - - wsptr += 8; /* advance pointer to next row */ - } -} - - -/* - * Perform dequantization and inverse DCT on one block of coefficients, - * producing a 14x7 output block. - * - * 7-point IDCT in pass 1 (columns), 14-point in pass 2 (rows). - */ - -GLOBAL(void) -jpeg_idct_14x7 (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, - JSAMPARRAY output_buf, JDIMENSION output_col) -{ - INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15, tmp16; - INT32 tmp20, tmp21, tmp22, tmp23, tmp24, tmp25, tmp26; - INT32 z1, z2, z3, z4; - JCOEFPTR inptr; - ISLOW_MULT_TYPE * quantptr; - int * wsptr; - JSAMPROW outptr; - JSAMPLE *range_limit = IDCT_range_limit(cinfo); - int ctr; - int workspace[8*7]; /* buffers data between passes */ - SHIFT_TEMPS - - /* Pass 1: process columns from input, store into work array. - * 7-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/14). - */ - inptr = coef_block; - quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; - wsptr = workspace; - for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) { - /* Even part */ - - tmp23 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); - tmp23 <<= CONST_BITS; - /* Add fudge factor here for final descale. */ - tmp23 += ONE << (CONST_BITS-PASS1_BITS-1); - - z1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); - z2 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); - z3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); - - tmp20 = MULTIPLY(z2 - z3, FIX(0.881747734)); /* c4 */ - tmp22 = MULTIPLY(z1 - z2, FIX(0.314692123)); /* c6 */ - tmp21 = tmp20 + tmp22 + tmp23 - MULTIPLY(z2, FIX(1.841218003)); /* c2+c4-c6 */ - tmp10 = z1 + z3; - z2 -= tmp10; - tmp10 = MULTIPLY(tmp10, FIX(1.274162392)) + tmp23; /* c2 */ - tmp20 += tmp10 - MULTIPLY(z3, FIX(0.077722536)); /* c2-c4-c6 */ - tmp22 += tmp10 - MULTIPLY(z1, FIX(2.470602249)); /* c2+c4+c6 */ - tmp23 += MULTIPLY(z2, FIX(1.414213562)); /* c0 */ - - /* Odd part */ - - z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); - z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); - z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); - - tmp11 = MULTIPLY(z1 + z2, FIX(0.935414347)); /* (c3+c1-c5)/2 */ - tmp12 = MULTIPLY(z1 - z2, FIX(0.170262339)); /* (c3+c5-c1)/2 */ - tmp10 = tmp11 - tmp12; - tmp11 += tmp12; - tmp12 = MULTIPLY(z2 + z3, - FIX(1.378756276)); /* -c1 */ - tmp11 += tmp12; - z2 = MULTIPLY(z1 + z3, FIX(0.613604268)); /* c5 */ - tmp10 += z2; - tmp12 += z2 + MULTIPLY(z3, FIX(1.870828693)); /* c3+c1-c5 */ - - /* Final output stage */ - - wsptr[8*0] = (int) RIGHT_SHIFT(tmp20 + tmp10, CONST_BITS-PASS1_BITS); - wsptr[8*6] = (int) RIGHT_SHIFT(tmp20 - tmp10, CONST_BITS-PASS1_BITS); - wsptr[8*1] = (int) RIGHT_SHIFT(tmp21 + tmp11, CONST_BITS-PASS1_BITS); - wsptr[8*5] = (int) RIGHT_SHIFT(tmp21 - tmp11, CONST_BITS-PASS1_BITS); - wsptr[8*2] = (int) RIGHT_SHIFT(tmp22 + tmp12, CONST_BITS-PASS1_BITS); - wsptr[8*4] = (int) RIGHT_SHIFT(tmp22 - tmp12, CONST_BITS-PASS1_BITS); - wsptr[8*3] = (int) RIGHT_SHIFT(tmp23, CONST_BITS-PASS1_BITS); - } - - /* Pass 2: process 7 rows from work array, store into output array. - * 14-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/28). - */ - wsptr = workspace; - for (ctr = 0; ctr < 7; ctr++) { - outptr = output_buf[ctr] + output_col; - - /* Even part */ - - /* Add fudge factor here for final descale. */ - z1 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); - z1 <<= CONST_BITS; - z4 = (INT32) wsptr[4]; - z2 = MULTIPLY(z4, FIX(1.274162392)); /* c4 */ - z3 = MULTIPLY(z4, FIX(0.314692123)); /* c12 */ - z4 = MULTIPLY(z4, FIX(0.881747734)); /* c8 */ - - tmp10 = z1 + z2; - tmp11 = z1 + z3; - tmp12 = z1 - z4; - - tmp23 = z1 - ((z2 + z3 - z4) << 1); /* c0 = (c4+c12-c8)*2 */ - - z1 = (INT32) wsptr[2]; - z2 = (INT32) wsptr[6]; - - z3 = MULTIPLY(z1 + z2, FIX(1.105676686)); /* c6 */ - - tmp13 = z3 + MULTIPLY(z1, FIX(0.273079590)); /* c2-c6 */ - tmp14 = z3 - MULTIPLY(z2, FIX(1.719280954)); /* c6+c10 */ - tmp15 = MULTIPLY(z1, FIX(0.613604268)) - /* c10 */ - MULTIPLY(z2, FIX(1.378756276)); /* c2 */ - - tmp20 = tmp10 + tmp13; - tmp26 = tmp10 - tmp13; - tmp21 = tmp11 + tmp14; - tmp25 = tmp11 - tmp14; - tmp22 = tmp12 + tmp15; - tmp24 = tmp12 - tmp15; - - /* Odd part */ - - z1 = (INT32) wsptr[1]; - z2 = (INT32) wsptr[3]; - z3 = (INT32) wsptr[5]; - z4 = (INT32) wsptr[7]; - z4 <<= CONST_BITS; - - tmp14 = z1 + z3; - tmp11 = MULTIPLY(z1 + z2, FIX(1.334852607)); /* c3 */ - tmp12 = MULTIPLY(tmp14, FIX(1.197448846)); /* c5 */ - tmp10 = tmp11 + tmp12 + z4 - MULTIPLY(z1, FIX(1.126980169)); /* c3+c5-c1 */ - tmp14 = MULTIPLY(tmp14, FIX(0.752406978)); /* c9 */ - tmp16 = tmp14 - MULTIPLY(z1, FIX(1.061150426)); /* c9+c11-c13 */ - z1 -= z2; - tmp15 = MULTIPLY(z1, FIX(0.467085129)) - z4; /* c11 */ - tmp16 += tmp15; - tmp13 = MULTIPLY(z2 + z3, - FIX(0.158341681)) - z4; /* -c13 */ - tmp11 += tmp13 - MULTIPLY(z2, FIX(0.424103948)); /* c3-c9-c13 */ - tmp12 += tmp13 - MULTIPLY(z3, FIX(2.373959773)); /* c3+c5-c13 */ - tmp13 = MULTIPLY(z3 - z2, FIX(1.405321284)); /* c1 */ - tmp14 += tmp13 + z4 - MULTIPLY(z3, FIX(1.6906431334)); /* c1+c9-c11 */ - tmp15 += tmp13 + MULTIPLY(z2, FIX(0.674957567)); /* c1+c11-c5 */ - - tmp13 = ((z1 - z3) << CONST_BITS) + z4; - - /* Final output stage */ - - outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp10, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[13] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp10, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp11, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[12] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp11, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp12, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[11] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp12, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp23 + tmp13, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[10] = range_limit[(int) RIGHT_SHIFT(tmp23 - tmp13, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp24 + tmp14, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[9] = range_limit[(int) RIGHT_SHIFT(tmp24 - tmp14, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp25 + tmp15, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[8] = range_limit[(int) RIGHT_SHIFT(tmp25 - tmp15, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp26 + tmp16, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp26 - tmp16, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - - wsptr += 8; /* advance pointer to next row */ - } -} - - -/* - * Perform dequantization and inverse DCT on one block of coefficients, - * producing a 12x6 output block. - * - * 6-point IDCT in pass 1 (columns), 12-point in pass 2 (rows). - */ - -GLOBAL(void) -jpeg_idct_12x6 (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, - JSAMPARRAY output_buf, JDIMENSION output_col) -{ - INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15; - INT32 tmp20, tmp21, tmp22, tmp23, tmp24, tmp25; - INT32 z1, z2, z3, z4; - JCOEFPTR inptr; - ISLOW_MULT_TYPE * quantptr; - int * wsptr; - JSAMPROW outptr; - JSAMPLE *range_limit = IDCT_range_limit(cinfo); - int ctr; - int workspace[8*6]; /* buffers data between passes */ - SHIFT_TEMPS - - /* Pass 1: process columns from input, store into work array. - * 6-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/12). - */ - inptr = coef_block; - quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; - wsptr = workspace; - for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) { - /* Even part */ - - tmp10 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); - tmp10 <<= CONST_BITS; - /* Add fudge factor here for final descale. */ - tmp10 += ONE << (CONST_BITS-PASS1_BITS-1); - tmp12 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); - tmp20 = MULTIPLY(tmp12, FIX(0.707106781)); /* c4 */ - tmp11 = tmp10 + tmp20; - tmp21 = RIGHT_SHIFT(tmp10 - tmp20 - tmp20, CONST_BITS-PASS1_BITS); - tmp20 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); - tmp10 = MULTIPLY(tmp20, FIX(1.224744871)); /* c2 */ - tmp20 = tmp11 + tmp10; - tmp22 = tmp11 - tmp10; - - /* Odd part */ - - z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); - z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); - z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); - tmp11 = MULTIPLY(z1 + z3, FIX(0.366025404)); /* c5 */ - tmp10 = tmp11 + ((z1 + z2) << CONST_BITS); - tmp12 = tmp11 + ((z3 - z2) << CONST_BITS); - tmp11 = (z1 - z2 - z3) << PASS1_BITS; - - /* Final output stage */ - - wsptr[8*0] = (int) RIGHT_SHIFT(tmp20 + tmp10, CONST_BITS-PASS1_BITS); - wsptr[8*5] = (int) RIGHT_SHIFT(tmp20 - tmp10, CONST_BITS-PASS1_BITS); - wsptr[8*1] = (int) (tmp21 + tmp11); - wsptr[8*4] = (int) (tmp21 - tmp11); - wsptr[8*2] = (int) RIGHT_SHIFT(tmp22 + tmp12, CONST_BITS-PASS1_BITS); - wsptr[8*3] = (int) RIGHT_SHIFT(tmp22 - tmp12, CONST_BITS-PASS1_BITS); - } - - /* Pass 2: process 6 rows from work array, store into output array. - * 12-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/24). - */ - wsptr = workspace; - for (ctr = 0; ctr < 6; ctr++) { - outptr = output_buf[ctr] + output_col; - - /* Even part */ - - /* Add fudge factor here for final descale. */ - z3 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); - z3 <<= CONST_BITS; - - z4 = (INT32) wsptr[4]; - z4 = MULTIPLY(z4, FIX(1.224744871)); /* c4 */ - - tmp10 = z3 + z4; - tmp11 = z3 - z4; - - z1 = (INT32) wsptr[2]; - z4 = MULTIPLY(z1, FIX(1.366025404)); /* c2 */ - z1 <<= CONST_BITS; - z2 = (INT32) wsptr[6]; - z2 <<= CONST_BITS; - - tmp12 = z1 - z2; - - tmp21 = z3 + tmp12; - tmp24 = z3 - tmp12; - - tmp12 = z4 + z2; - - tmp20 = tmp10 + tmp12; - tmp25 = tmp10 - tmp12; - - tmp12 = z4 - z1 - z2; - - tmp22 = tmp11 + tmp12; - tmp23 = tmp11 - tmp12; - - /* Odd part */ - - z1 = (INT32) wsptr[1]; - z2 = (INT32) wsptr[3]; - z3 = (INT32) wsptr[5]; - z4 = (INT32) wsptr[7]; - - tmp11 = MULTIPLY(z2, FIX(1.306562965)); /* c3 */ - tmp14 = MULTIPLY(z2, - FIX_0_541196100); /* -c9 */ - - tmp10 = z1 + z3; - tmp15 = MULTIPLY(tmp10 + z4, FIX(0.860918669)); /* c7 */ - tmp12 = tmp15 + MULTIPLY(tmp10, FIX(0.261052384)); /* c5-c7 */ - tmp10 = tmp12 + tmp11 + MULTIPLY(z1, FIX(0.280143716)); /* c1-c5 */ - tmp13 = MULTIPLY(z3 + z4, - FIX(1.045510580)); /* -(c7+c11) */ - tmp12 += tmp13 + tmp14 - MULTIPLY(z3, FIX(1.478575242)); /* c1+c5-c7-c11 */ - tmp13 += tmp15 - tmp11 + MULTIPLY(z4, FIX(1.586706681)); /* c1+c11 */ - tmp15 += tmp14 - MULTIPLY(z1, FIX(0.676326758)) - /* c7-c11 */ - MULTIPLY(z4, FIX(1.982889723)); /* c5+c7 */ - - z1 -= z4; - z2 -= z3; - z3 = MULTIPLY(z1 + z2, FIX_0_541196100); /* c9 */ - tmp11 = z3 + MULTIPLY(z1, FIX_0_765366865); /* c3-c9 */ - tmp14 = z3 - MULTIPLY(z2, FIX_1_847759065); /* c3+c9 */ - - /* Final output stage */ - - outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp10, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[11] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp10, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp11, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[10] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp11, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp12, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[9] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp12, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp23 + tmp13, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[8] = range_limit[(int) RIGHT_SHIFT(tmp23 - tmp13, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp24 + tmp14, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp24 - tmp14, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp25 + tmp15, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp25 - tmp15, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - - wsptr += 8; /* advance pointer to next row */ - } -} - - -/* - * Perform dequantization and inverse DCT on one block of coefficients, - * producing a 10x5 output block. - * - * 5-point IDCT in pass 1 (columns), 10-point in pass 2 (rows). - */ - -GLOBAL(void) -jpeg_idct_10x5 (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, - JSAMPARRAY output_buf, JDIMENSION output_col) -{ - INT32 tmp10, tmp11, tmp12, tmp13, tmp14; - INT32 tmp20, tmp21, tmp22, tmp23, tmp24; - INT32 z1, z2, z3, z4; - JCOEFPTR inptr; - ISLOW_MULT_TYPE * quantptr; - int * wsptr; - JSAMPROW outptr; - JSAMPLE *range_limit = IDCT_range_limit(cinfo); - int ctr; - int workspace[8*5]; /* buffers data between passes */ - SHIFT_TEMPS - - /* Pass 1: process columns from input, store into work array. - * 5-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/10). - */ - inptr = coef_block; - quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; - wsptr = workspace; - for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) { - /* Even part */ - - tmp12 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); - tmp12 <<= CONST_BITS; - /* Add fudge factor here for final descale. */ - tmp12 += ONE << (CONST_BITS-PASS1_BITS-1); - tmp13 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); - tmp14 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); - z1 = MULTIPLY(tmp13 + tmp14, FIX(0.790569415)); /* (c2+c4)/2 */ - z2 = MULTIPLY(tmp13 - tmp14, FIX(0.353553391)); /* (c2-c4)/2 */ - z3 = tmp12 + z2; - tmp10 = z3 + z1; - tmp11 = z3 - z1; - tmp12 -= z2 << 2; - - /* Odd part */ - - z2 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); - z3 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); - - z1 = MULTIPLY(z2 + z3, FIX(0.831253876)); /* c3 */ - tmp13 = z1 + MULTIPLY(z2, FIX(0.513743148)); /* c1-c3 */ - tmp14 = z1 - MULTIPLY(z3, FIX(2.176250899)); /* c1+c3 */ - - /* Final output stage */ - - wsptr[8*0] = (int) RIGHT_SHIFT(tmp10 + tmp13, CONST_BITS-PASS1_BITS); - wsptr[8*4] = (int) RIGHT_SHIFT(tmp10 - tmp13, CONST_BITS-PASS1_BITS); - wsptr[8*1] = (int) RIGHT_SHIFT(tmp11 + tmp14, CONST_BITS-PASS1_BITS); - wsptr[8*3] = (int) RIGHT_SHIFT(tmp11 - tmp14, CONST_BITS-PASS1_BITS); - wsptr[8*2] = (int) RIGHT_SHIFT(tmp12, CONST_BITS-PASS1_BITS); - } - - /* Pass 2: process 5 rows from work array, store into output array. - * 10-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/20). - */ - wsptr = workspace; - for (ctr = 0; ctr < 5; ctr++) { - outptr = output_buf[ctr] + output_col; - - /* Even part */ - - /* Add fudge factor here for final descale. */ - z3 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); - z3 <<= CONST_BITS; - z4 = (INT32) wsptr[4]; - z1 = MULTIPLY(z4, FIX(1.144122806)); /* c4 */ - z2 = MULTIPLY(z4, FIX(0.437016024)); /* c8 */ - tmp10 = z3 + z1; - tmp11 = z3 - z2; - - tmp22 = z3 - ((z1 - z2) << 1); /* c0 = (c4-c8)*2 */ - - z2 = (INT32) wsptr[2]; - z3 = (INT32) wsptr[6]; - - z1 = MULTIPLY(z2 + z3, FIX(0.831253876)); /* c6 */ - tmp12 = z1 + MULTIPLY(z2, FIX(0.513743148)); /* c2-c6 */ - tmp13 = z1 - MULTIPLY(z3, FIX(2.176250899)); /* c2+c6 */ - - tmp20 = tmp10 + tmp12; - tmp24 = tmp10 - tmp12; - tmp21 = tmp11 + tmp13; - tmp23 = tmp11 - tmp13; - - /* Odd part */ - - z1 = (INT32) wsptr[1]; - z2 = (INT32) wsptr[3]; - z3 = (INT32) wsptr[5]; - z3 <<= CONST_BITS; - z4 = (INT32) wsptr[7]; - - tmp11 = z2 + z4; - tmp13 = z2 - z4; - - tmp12 = MULTIPLY(tmp13, FIX(0.309016994)); /* (c3-c7)/2 */ - - z2 = MULTIPLY(tmp11, FIX(0.951056516)); /* (c3+c7)/2 */ - z4 = z3 + tmp12; - - tmp10 = MULTIPLY(z1, FIX(1.396802247)) + z2 + z4; /* c1 */ - tmp14 = MULTIPLY(z1, FIX(0.221231742)) - z2 + z4; /* c9 */ - - z2 = MULTIPLY(tmp11, FIX(0.587785252)); /* (c1-c9)/2 */ - z4 = z3 - tmp12 - (tmp13 << (CONST_BITS - 1)); - - tmp12 = ((z1 - tmp13) << CONST_BITS) - z3; - - tmp11 = MULTIPLY(z1, FIX(1.260073511)) - z2 - z4; /* c3 */ - tmp13 = MULTIPLY(z1, FIX(0.642039522)) - z2 + z4; /* c7 */ - - /* Final output stage */ - - outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp10, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[9] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp10, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp11, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[8] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp11, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp12, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp12, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp23 + tmp13, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp23 - tmp13, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp24 + tmp14, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp24 - tmp14, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - - wsptr += 8; /* advance pointer to next row */ - } -} - - -/* - * Perform dequantization and inverse DCT on one block of coefficients, - * producing a 8x4 output block. - * - * 4-point IDCT in pass 1 (columns), 8-point in pass 2 (rows). - */ - -GLOBAL(void) -jpeg_idct_8x4 (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, - JSAMPARRAY output_buf, JDIMENSION output_col) -{ - INT32 tmp0, tmp1, tmp2, tmp3; - INT32 tmp10, tmp11, tmp12, tmp13; - INT32 z1, z2, z3; - JCOEFPTR inptr; - ISLOW_MULT_TYPE * quantptr; - int * wsptr; - JSAMPROW outptr; - JSAMPLE *range_limit = IDCT_range_limit(cinfo); - int ctr; - int workspace[8*4]; /* buffers data between passes */ - SHIFT_TEMPS - - /* Pass 1: process columns from input, store into work array. - * 4-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/16). - */ - inptr = coef_block; - quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; - wsptr = workspace; - for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) { - /* Even part */ - - tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); - tmp2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); - - tmp10 = (tmp0 + tmp2) << PASS1_BITS; - tmp12 = (tmp0 - tmp2) << PASS1_BITS; - - /* Odd part */ - /* Same rotation as in the even part of the 8x8 LL&M IDCT */ - - z2 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); - z3 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); - - z1 = MULTIPLY(z2 + z3, FIX_0_541196100); /* c6 */ - /* Add fudge factor here for final descale. */ - z1 += ONE << (CONST_BITS-PASS1_BITS-1); - tmp0 = RIGHT_SHIFT(z1 + MULTIPLY(z2, FIX_0_765366865), /* c2-c6 */ - CONST_BITS-PASS1_BITS); - tmp2 = RIGHT_SHIFT(z1 - MULTIPLY(z3, FIX_1_847759065), /* c2+c6 */ - CONST_BITS-PASS1_BITS); - - /* Final output stage */ - - wsptr[8*0] = (int) (tmp10 + tmp0); - wsptr[8*3] = (int) (tmp10 - tmp0); - wsptr[8*1] = (int) (tmp12 + tmp2); - wsptr[8*2] = (int) (tmp12 - tmp2); - } - - /* Pass 2: process rows from work array, store into output array. */ - /* Note that we must descale the results by a factor of 8 == 2**3, */ - /* and also undo the PASS1_BITS scaling. */ - - wsptr = workspace; - for (ctr = 0; ctr < 4; ctr++) { - outptr = output_buf[ctr] + output_col; - - /* Even part: reverse the even part of the forward DCT. */ - /* The rotator is sqrt(2)*c(-6). */ - - z2 = (INT32) wsptr[2]; - z3 = (INT32) wsptr[6]; - - z1 = MULTIPLY(z2 + z3, FIX_0_541196100); - tmp2 = z1 + MULTIPLY(z2, FIX_0_765366865); - tmp3 = z1 - MULTIPLY(z3, FIX_1_847759065); - - /* Add fudge factor here for final descale. */ - z2 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); - z3 = (INT32) wsptr[4]; - - tmp0 = (z2 + z3) << CONST_BITS; - tmp1 = (z2 - z3) << CONST_BITS; - - tmp10 = tmp0 + tmp2; - tmp13 = tmp0 - tmp2; - tmp11 = tmp1 + tmp3; - tmp12 = tmp1 - tmp3; - - /* Odd part per figure 8; the matrix is unitary and hence its - * transpose is its inverse. i0..i3 are y7,y5,y3,y1 respectively. - */ - - tmp0 = (INT32) wsptr[7]; - tmp1 = (INT32) wsptr[5]; - tmp2 = (INT32) wsptr[3]; - tmp3 = (INT32) wsptr[1]; - - z2 = tmp0 + tmp2; - z3 = tmp1 + tmp3; - - z1 = MULTIPLY(z2 + z3, FIX_1_175875602); /* sqrt(2) * c3 */ - z2 = MULTIPLY(z2, - FIX_1_961570560); /* sqrt(2) * (-c3-c5) */ - z3 = MULTIPLY(z3, - FIX_0_390180644); /* sqrt(2) * (c5-c3) */ - z2 += z1; - z3 += z1; - - z1 = MULTIPLY(tmp0 + tmp3, - FIX_0_899976223); /* sqrt(2) * (c7-c3) */ - tmp0 = MULTIPLY(tmp0, FIX_0_298631336); /* sqrt(2) * (-c1+c3+c5-c7) */ - tmp3 = MULTIPLY(tmp3, FIX_1_501321110); /* sqrt(2) * ( c1+c3-c5-c7) */ - tmp0 += z1 + z2; - tmp3 += z1 + z3; - - z1 = MULTIPLY(tmp1 + tmp2, - FIX_2_562915447); /* sqrt(2) * (-c1-c3) */ - tmp1 = MULTIPLY(tmp1, FIX_2_053119869); /* sqrt(2) * ( c1+c3-c5+c7) */ - tmp2 = MULTIPLY(tmp2, FIX_3_072711026); /* sqrt(2) * ( c1+c3+c5-c7) */ - tmp1 += z1 + z3; - tmp2 += z1 + z2; - - /* Final output stage: inputs are tmp10..tmp13, tmp0..tmp3 */ - - outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp3, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp3, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp11 + tmp2, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp11 - tmp2, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp12 + tmp1, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp12 - tmp1, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp13 + tmp0, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp13 - tmp0, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - - wsptr += DCTSIZE; /* advance pointer to next row */ - } -} - - -/* - * Perform dequantization and inverse DCT on one block of coefficients, - * producing a reduced-size 6x3 output block. - * - * 3-point IDCT in pass 1 (columns), 6-point in pass 2 (rows). - */ - -GLOBAL(void) -jpeg_idct_6x3 (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, - JSAMPARRAY output_buf, JDIMENSION output_col) -{ - INT32 tmp0, tmp1, tmp2, tmp10, tmp11, tmp12; - INT32 z1, z2, z3; - JCOEFPTR inptr; - ISLOW_MULT_TYPE * quantptr; - int * wsptr; - JSAMPROW outptr; - JSAMPLE *range_limit = IDCT_range_limit(cinfo); - int ctr; - int workspace[6*3]; /* buffers data between passes */ - SHIFT_TEMPS - - /* Pass 1: process columns from input, store into work array. - * 3-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/6). - */ - inptr = coef_block; - quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; - wsptr = workspace; - for (ctr = 0; ctr < 6; ctr++, inptr++, quantptr++, wsptr++) { - /* Even part */ - - tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); - tmp0 <<= CONST_BITS; - /* Add fudge factor here for final descale. */ - tmp0 += ONE << (CONST_BITS-PASS1_BITS-1); - tmp2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); - tmp12 = MULTIPLY(tmp2, FIX(0.707106781)); /* c2 */ - tmp10 = tmp0 + tmp12; - tmp2 = tmp0 - tmp12 - tmp12; - - /* Odd part */ - - tmp12 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); - tmp0 = MULTIPLY(tmp12, FIX(1.224744871)); /* c1 */ - - /* Final output stage */ - - wsptr[6*0] = (int) RIGHT_SHIFT(tmp10 + tmp0, CONST_BITS-PASS1_BITS); - wsptr[6*2] = (int) RIGHT_SHIFT(tmp10 - tmp0, CONST_BITS-PASS1_BITS); - wsptr[6*1] = (int) RIGHT_SHIFT(tmp2, CONST_BITS-PASS1_BITS); - } - - /* Pass 2: process 3 rows from work array, store into output array. - * 6-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/12). - */ - wsptr = workspace; - for (ctr = 0; ctr < 3; ctr++) { - outptr = output_buf[ctr] + output_col; - - /* Even part */ - - /* Add fudge factor here for final descale. */ - tmp0 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); - tmp0 <<= CONST_BITS; - tmp2 = (INT32) wsptr[4]; - tmp10 = MULTIPLY(tmp2, FIX(0.707106781)); /* c4 */ - tmp1 = tmp0 + tmp10; - tmp11 = tmp0 - tmp10 - tmp10; - tmp10 = (INT32) wsptr[2]; - tmp0 = MULTIPLY(tmp10, FIX(1.224744871)); /* c2 */ - tmp10 = tmp1 + tmp0; - tmp12 = tmp1 - tmp0; - - /* Odd part */ - - z1 = (INT32) wsptr[1]; - z2 = (INT32) wsptr[3]; - z3 = (INT32) wsptr[5]; - tmp1 = MULTIPLY(z1 + z3, FIX(0.366025404)); /* c5 */ - tmp0 = tmp1 + ((z1 + z2) << CONST_BITS); - tmp2 = tmp1 + ((z3 - z2) << CONST_BITS); - tmp1 = (z1 - z2 - z3) << CONST_BITS; - - /* Final output stage */ - - outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp0, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp0, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp11 + tmp1, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp11 - tmp1, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp12 + tmp2, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp12 - tmp2, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - - wsptr += 6; /* advance pointer to next row */ - } -} - - -/* - * Perform dequantization and inverse DCT on one block of coefficients, - * producing a 4x2 output block. - * - * 2-point IDCT in pass 1 (columns), 4-point in pass 2 (rows). - */ - -GLOBAL(void) -jpeg_idct_4x2 (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, - JSAMPARRAY output_buf, JDIMENSION output_col) -{ - INT32 tmp0, tmp2, tmp10, tmp12; - INT32 z1, z2, z3; - JCOEFPTR inptr; - ISLOW_MULT_TYPE * quantptr; - INT32 * wsptr; - JSAMPROW outptr; - JSAMPLE *range_limit = IDCT_range_limit(cinfo); - int ctr; - INT32 workspace[4*2]; /* buffers data between passes */ - SHIFT_TEMPS - - /* Pass 1: process columns from input, store into work array. */ - - inptr = coef_block; - quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; - wsptr = workspace; - for (ctr = 0; ctr < 4; ctr++, inptr++, quantptr++, wsptr++) { - /* Even part */ - - tmp10 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); - - /* Odd part */ - - tmp0 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); - - /* Final output stage */ - - wsptr[4*0] = tmp10 + tmp0; - wsptr[4*1] = tmp10 - tmp0; - } - - /* Pass 2: process 2 rows from work array, store into output array. - * 4-point IDCT kernel, - * cK represents sqrt(2) * cos(K*pi/16) [refers to 8-point IDCT]. - */ - wsptr = workspace; - for (ctr = 0; ctr < 2; ctr++) { - outptr = output_buf[ctr] + output_col; - - /* Even part */ - - /* Add fudge factor here for final descale. */ - tmp0 = wsptr[0] + (ONE << 2); - tmp2 = wsptr[2]; - - tmp10 = (tmp0 + tmp2) << CONST_BITS; - tmp12 = (tmp0 - tmp2) << CONST_BITS; - - /* Odd part */ - /* Same rotation as in the even part of the 8x8 LL&M IDCT */ - - z2 = wsptr[1]; - z3 = wsptr[3]; - - z1 = MULTIPLY(z2 + z3, FIX_0_541196100); /* c6 */ - tmp0 = z1 + MULTIPLY(z2, FIX_0_765366865); /* c2-c6 */ - tmp2 = z1 - MULTIPLY(z3, FIX_1_847759065); /* c2+c6 */ - - /* Final output stage */ - - outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp0, - CONST_BITS+3) - & RANGE_MASK]; - outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp0, - CONST_BITS+3) - & RANGE_MASK]; - outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp12 + tmp2, - CONST_BITS+3) - & RANGE_MASK]; - outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp12 - tmp2, - CONST_BITS+3) - & RANGE_MASK]; - - wsptr += 4; /* advance pointer to next row */ - } -} - - -/* - * Perform dequantization and inverse DCT on one block of coefficients, - * producing a 2x1 output block. - * - * 1-point IDCT in pass 1 (columns), 2-point in pass 2 (rows). - */ - -GLOBAL(void) -jpeg_idct_2x1 (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, - JSAMPARRAY output_buf, JDIMENSION output_col) -{ - INT32 tmp0, tmp10; - ISLOW_MULT_TYPE * quantptr; - JSAMPROW outptr; - JSAMPLE *range_limit = IDCT_range_limit(cinfo); - SHIFT_TEMPS - - /* Pass 1: empty. */ - - /* Pass 2: process 1 row from input, store into output array. */ - - quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; - outptr = output_buf[0] + output_col; - - /* Even part */ - - tmp10 = DEQUANTIZE(coef_block[0], quantptr[0]); - /* Add fudge factor here for final descale. */ - tmp10 += ONE << 2; - - /* Odd part */ - - tmp0 = DEQUANTIZE(coef_block[1], quantptr[1]); - - /* Final output stage */ - - outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp0, 3) & RANGE_MASK]; - outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp0, 3) & RANGE_MASK]; -} - - -/* - * Perform dequantization and inverse DCT on one block of coefficients, - * producing a 8x16 output block. - * - * 16-point IDCT in pass 1 (columns), 8-point in pass 2 (rows). - */ - -GLOBAL(void) -jpeg_idct_8x16 (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, - JSAMPARRAY output_buf, JDIMENSION output_col) -{ - INT32 tmp0, tmp1, tmp2, tmp3, tmp10, tmp11, tmp12, tmp13; - INT32 tmp20, tmp21, tmp22, tmp23, tmp24, tmp25, tmp26, tmp27; - INT32 z1, z2, z3, z4; - JCOEFPTR inptr; - ISLOW_MULT_TYPE * quantptr; - int * wsptr; - JSAMPROW outptr; - JSAMPLE *range_limit = IDCT_range_limit(cinfo); - int ctr; - int workspace[8*16]; /* buffers data between passes */ - SHIFT_TEMPS - - /* Pass 1: process columns from input, store into work array. - * 16-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/32). - */ - inptr = coef_block; - quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; - wsptr = workspace; - for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) { - /* Even part */ - - tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); - tmp0 <<= CONST_BITS; - /* Add fudge factor here for final descale. */ - tmp0 += ONE << (CONST_BITS-PASS1_BITS-1); - - z1 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); - tmp1 = MULTIPLY(z1, FIX(1.306562965)); /* c4[16] = c2[8] */ - tmp2 = MULTIPLY(z1, FIX_0_541196100); /* c12[16] = c6[8] */ - - tmp10 = tmp0 + tmp1; - tmp11 = tmp0 - tmp1; - tmp12 = tmp0 + tmp2; - tmp13 = tmp0 - tmp2; - - z1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); - z2 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); - z3 = z1 - z2; - z4 = MULTIPLY(z3, FIX(0.275899379)); /* c14[16] = c7[8] */ - z3 = MULTIPLY(z3, FIX(1.387039845)); /* c2[16] = c1[8] */ - - tmp0 = z3 + MULTIPLY(z2, FIX_2_562915447); /* (c6+c2)[16] = (c3+c1)[8] */ - tmp1 = z4 + MULTIPLY(z1, FIX_0_899976223); /* (c6-c14)[16] = (c3-c7)[8] */ - tmp2 = z3 - MULTIPLY(z1, FIX(0.601344887)); /* (c2-c10)[16] = (c1-c5)[8] */ - tmp3 = z4 - MULTIPLY(z2, FIX(0.509795579)); /* (c10-c14)[16] = (c5-c7)[8] */ - - tmp20 = tmp10 + tmp0; - tmp27 = tmp10 - tmp0; - tmp21 = tmp12 + tmp1; - tmp26 = tmp12 - tmp1; - tmp22 = tmp13 + tmp2; - tmp25 = tmp13 - tmp2; - tmp23 = tmp11 + tmp3; - tmp24 = tmp11 - tmp3; - - /* Odd part */ - - z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); - z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); - z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); - z4 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); - - tmp11 = z1 + z3; - - tmp1 = MULTIPLY(z1 + z2, FIX(1.353318001)); /* c3 */ - tmp2 = MULTIPLY(tmp11, FIX(1.247225013)); /* c5 */ - tmp3 = MULTIPLY(z1 + z4, FIX(1.093201867)); /* c7 */ - tmp10 = MULTIPLY(z1 - z4, FIX(0.897167586)); /* c9 */ - tmp11 = MULTIPLY(tmp11, FIX(0.666655658)); /* c11 */ - tmp12 = MULTIPLY(z1 - z2, FIX(0.410524528)); /* c13 */ - tmp0 = tmp1 + tmp2 + tmp3 - - MULTIPLY(z1, FIX(2.286341144)); /* c7+c5+c3-c1 */ - tmp13 = tmp10 + tmp11 + tmp12 - - MULTIPLY(z1, FIX(1.835730603)); /* c9+c11+c13-c15 */ - z1 = MULTIPLY(z2 + z3, FIX(0.138617169)); /* c15 */ - tmp1 += z1 + MULTIPLY(z2, FIX(0.071888074)); /* c9+c11-c3-c15 */ - tmp2 += z1 - MULTIPLY(z3, FIX(1.125726048)); /* c5+c7+c15-c3 */ - z1 = MULTIPLY(z3 - z2, FIX(1.407403738)); /* c1 */ - tmp11 += z1 - MULTIPLY(z3, FIX(0.766367282)); /* c1+c11-c9-c13 */ - tmp12 += z1 + MULTIPLY(z2, FIX(1.971951411)); /* c1+c5+c13-c7 */ - z2 += z4; - z1 = MULTIPLY(z2, - FIX(0.666655658)); /* -c11 */ - tmp1 += z1; - tmp3 += z1 + MULTIPLY(z4, FIX(1.065388962)); /* c3+c11+c15-c7 */ - z2 = MULTIPLY(z2, - FIX(1.247225013)); /* -c5 */ - tmp10 += z2 + MULTIPLY(z4, FIX(3.141271809)); /* c1+c5+c9-c13 */ - tmp12 += z2; - z2 = MULTIPLY(z3 + z4, - FIX(1.353318001)); /* -c3 */ - tmp2 += z2; - tmp3 += z2; - z2 = MULTIPLY(z4 - z3, FIX(0.410524528)); /* c13 */ - tmp10 += z2; - tmp11 += z2; - - /* Final output stage */ - - wsptr[8*0] = (int) RIGHT_SHIFT(tmp20 + tmp0, CONST_BITS-PASS1_BITS); - wsptr[8*15] = (int) RIGHT_SHIFT(tmp20 - tmp0, CONST_BITS-PASS1_BITS); - wsptr[8*1] = (int) RIGHT_SHIFT(tmp21 + tmp1, CONST_BITS-PASS1_BITS); - wsptr[8*14] = (int) RIGHT_SHIFT(tmp21 - tmp1, CONST_BITS-PASS1_BITS); - wsptr[8*2] = (int) RIGHT_SHIFT(tmp22 + tmp2, CONST_BITS-PASS1_BITS); - wsptr[8*13] = (int) RIGHT_SHIFT(tmp22 - tmp2, CONST_BITS-PASS1_BITS); - wsptr[8*3] = (int) RIGHT_SHIFT(tmp23 + tmp3, CONST_BITS-PASS1_BITS); - wsptr[8*12] = (int) RIGHT_SHIFT(tmp23 - tmp3, CONST_BITS-PASS1_BITS); - wsptr[8*4] = (int) RIGHT_SHIFT(tmp24 + tmp10, CONST_BITS-PASS1_BITS); - wsptr[8*11] = (int) RIGHT_SHIFT(tmp24 - tmp10, CONST_BITS-PASS1_BITS); - wsptr[8*5] = (int) RIGHT_SHIFT(tmp25 + tmp11, CONST_BITS-PASS1_BITS); - wsptr[8*10] = (int) RIGHT_SHIFT(tmp25 - tmp11, CONST_BITS-PASS1_BITS); - wsptr[8*6] = (int) RIGHT_SHIFT(tmp26 + tmp12, CONST_BITS-PASS1_BITS); - wsptr[8*9] = (int) RIGHT_SHIFT(tmp26 - tmp12, CONST_BITS-PASS1_BITS); - wsptr[8*7] = (int) RIGHT_SHIFT(tmp27 + tmp13, CONST_BITS-PASS1_BITS); - wsptr[8*8] = (int) RIGHT_SHIFT(tmp27 - tmp13, CONST_BITS-PASS1_BITS); - } - - /* Pass 2: process rows from work array, store into output array. */ - /* Note that we must descale the results by a factor of 8 == 2**3, */ - /* and also undo the PASS1_BITS scaling. */ - - wsptr = workspace; - for (ctr = 0; ctr < 16; ctr++) { - outptr = output_buf[ctr] + output_col; - - /* Even part: reverse the even part of the forward DCT. */ - /* The rotator is sqrt(2)*c(-6). */ - - z2 = (INT32) wsptr[2]; - z3 = (INT32) wsptr[6]; - - z1 = MULTIPLY(z2 + z3, FIX_0_541196100); - tmp2 = z1 + MULTIPLY(z2, FIX_0_765366865); - tmp3 = z1 - MULTIPLY(z3, FIX_1_847759065); - - /* Add fudge factor here for final descale. */ - z2 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); - z3 = (INT32) wsptr[4]; - - tmp0 = (z2 + z3) << CONST_BITS; - tmp1 = (z2 - z3) << CONST_BITS; - - tmp10 = tmp0 + tmp2; - tmp13 = tmp0 - tmp2; - tmp11 = tmp1 + tmp3; - tmp12 = tmp1 - tmp3; - - /* Odd part per figure 8; the matrix is unitary and hence its - * transpose is its inverse. i0..i3 are y7,y5,y3,y1 respectively. - */ - - tmp0 = (INT32) wsptr[7]; - tmp1 = (INT32) wsptr[5]; - tmp2 = (INT32) wsptr[3]; - tmp3 = (INT32) wsptr[1]; - - z2 = tmp0 + tmp2; - z3 = tmp1 + tmp3; - - z1 = MULTIPLY(z2 + z3, FIX_1_175875602); /* sqrt(2) * c3 */ - z2 = MULTIPLY(z2, - FIX_1_961570560); /* sqrt(2) * (-c3-c5) */ - z3 = MULTIPLY(z3, - FIX_0_390180644); /* sqrt(2) * (c5-c3) */ - z2 += z1; - z3 += z1; - - z1 = MULTIPLY(tmp0 + tmp3, - FIX_0_899976223); /* sqrt(2) * (c7-c3) */ - tmp0 = MULTIPLY(tmp0, FIX_0_298631336); /* sqrt(2) * (-c1+c3+c5-c7) */ - tmp3 = MULTIPLY(tmp3, FIX_1_501321110); /* sqrt(2) * ( c1+c3-c5-c7) */ - tmp0 += z1 + z2; - tmp3 += z1 + z3; - - z1 = MULTIPLY(tmp1 + tmp2, - FIX_2_562915447); /* sqrt(2) * (-c1-c3) */ - tmp1 = MULTIPLY(tmp1, FIX_2_053119869); /* sqrt(2) * ( c1+c3-c5+c7) */ - tmp2 = MULTIPLY(tmp2, FIX_3_072711026); /* sqrt(2) * ( c1+c3+c5-c7) */ - tmp1 += z1 + z3; - tmp2 += z1 + z2; - - /* Final output stage: inputs are tmp10..tmp13, tmp0..tmp3 */ - - outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp3, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp3, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp11 + tmp2, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp11 - tmp2, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp12 + tmp1, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp12 - tmp1, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp13 + tmp0, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp13 - tmp0, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - - wsptr += DCTSIZE; /* advance pointer to next row */ - } -} - - -/* - * Perform dequantization and inverse DCT on one block of coefficients, - * producing a 7x14 output block. - * - * 14-point IDCT in pass 1 (columns), 7-point in pass 2 (rows). - */ - -GLOBAL(void) -jpeg_idct_7x14 (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, - JSAMPARRAY output_buf, JDIMENSION output_col) -{ - INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15, tmp16; - INT32 tmp20, tmp21, tmp22, tmp23, tmp24, tmp25, tmp26; - INT32 z1, z2, z3, z4; - JCOEFPTR inptr; - ISLOW_MULT_TYPE * quantptr; - int * wsptr; - JSAMPROW outptr; - JSAMPLE *range_limit = IDCT_range_limit(cinfo); - int ctr; - int workspace[7*14]; /* buffers data between passes */ - SHIFT_TEMPS - - /* Pass 1: process columns from input, store into work array. - * 14-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/28). - */ - inptr = coef_block; - quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; - wsptr = workspace; - for (ctr = 0; ctr < 7; ctr++, inptr++, quantptr++, wsptr++) { - /* Even part */ - - z1 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); - z1 <<= CONST_BITS; - /* Add fudge factor here for final descale. */ - z1 += ONE << (CONST_BITS-PASS1_BITS-1); - z4 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); - z2 = MULTIPLY(z4, FIX(1.274162392)); /* c4 */ - z3 = MULTIPLY(z4, FIX(0.314692123)); /* c12 */ - z4 = MULTIPLY(z4, FIX(0.881747734)); /* c8 */ - - tmp10 = z1 + z2; - tmp11 = z1 + z3; - tmp12 = z1 - z4; - - tmp23 = RIGHT_SHIFT(z1 - ((z2 + z3 - z4) << 1), /* c0 = (c4+c12-c8)*2 */ - CONST_BITS-PASS1_BITS); - - z1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); - z2 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); - - z3 = MULTIPLY(z1 + z2, FIX(1.105676686)); /* c6 */ - - tmp13 = z3 + MULTIPLY(z1, FIX(0.273079590)); /* c2-c6 */ - tmp14 = z3 - MULTIPLY(z2, FIX(1.719280954)); /* c6+c10 */ - tmp15 = MULTIPLY(z1, FIX(0.613604268)) - /* c10 */ - MULTIPLY(z2, FIX(1.378756276)); /* c2 */ - - tmp20 = tmp10 + tmp13; - tmp26 = tmp10 - tmp13; - tmp21 = tmp11 + tmp14; - tmp25 = tmp11 - tmp14; - tmp22 = tmp12 + tmp15; - tmp24 = tmp12 - tmp15; - - /* Odd part */ - - z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); - z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); - z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); - z4 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); - tmp13 = z4 << CONST_BITS; - - tmp14 = z1 + z3; - tmp11 = MULTIPLY(z1 + z2, FIX(1.334852607)); /* c3 */ - tmp12 = MULTIPLY(tmp14, FIX(1.197448846)); /* c5 */ - tmp10 = tmp11 + tmp12 + tmp13 - MULTIPLY(z1, FIX(1.126980169)); /* c3+c5-c1 */ - tmp14 = MULTIPLY(tmp14, FIX(0.752406978)); /* c9 */ - tmp16 = tmp14 - MULTIPLY(z1, FIX(1.061150426)); /* c9+c11-c13 */ - z1 -= z2; - tmp15 = MULTIPLY(z1, FIX(0.467085129)) - tmp13; /* c11 */ - tmp16 += tmp15; - z1 += z4; - z4 = MULTIPLY(z2 + z3, - FIX(0.158341681)) - tmp13; /* -c13 */ - tmp11 += z4 - MULTIPLY(z2, FIX(0.424103948)); /* c3-c9-c13 */ - tmp12 += z4 - MULTIPLY(z3, FIX(2.373959773)); /* c3+c5-c13 */ - z4 = MULTIPLY(z3 - z2, FIX(1.405321284)); /* c1 */ - tmp14 += z4 + tmp13 - MULTIPLY(z3, FIX(1.6906431334)); /* c1+c9-c11 */ - tmp15 += z4 + MULTIPLY(z2, FIX(0.674957567)); /* c1+c11-c5 */ - - tmp13 = (z1 - z3) << PASS1_BITS; - - /* Final output stage */ - - wsptr[7*0] = (int) RIGHT_SHIFT(tmp20 + tmp10, CONST_BITS-PASS1_BITS); - wsptr[7*13] = (int) RIGHT_SHIFT(tmp20 - tmp10, CONST_BITS-PASS1_BITS); - wsptr[7*1] = (int) RIGHT_SHIFT(tmp21 + tmp11, CONST_BITS-PASS1_BITS); - wsptr[7*12] = (int) RIGHT_SHIFT(tmp21 - tmp11, CONST_BITS-PASS1_BITS); - wsptr[7*2] = (int) RIGHT_SHIFT(tmp22 + tmp12, CONST_BITS-PASS1_BITS); - wsptr[7*11] = (int) RIGHT_SHIFT(tmp22 - tmp12, CONST_BITS-PASS1_BITS); - wsptr[7*3] = (int) (tmp23 + tmp13); - wsptr[7*10] = (int) (tmp23 - tmp13); - wsptr[7*4] = (int) RIGHT_SHIFT(tmp24 + tmp14, CONST_BITS-PASS1_BITS); - wsptr[7*9] = (int) RIGHT_SHIFT(tmp24 - tmp14, CONST_BITS-PASS1_BITS); - wsptr[7*5] = (int) RIGHT_SHIFT(tmp25 + tmp15, CONST_BITS-PASS1_BITS); - wsptr[7*8] = (int) RIGHT_SHIFT(tmp25 - tmp15, CONST_BITS-PASS1_BITS); - wsptr[7*6] = (int) RIGHT_SHIFT(tmp26 + tmp16, CONST_BITS-PASS1_BITS); - wsptr[7*7] = (int) RIGHT_SHIFT(tmp26 - tmp16, CONST_BITS-PASS1_BITS); - } - - /* Pass 2: process 14 rows from work array, store into output array. - * 7-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/14). - */ - wsptr = workspace; - for (ctr = 0; ctr < 14; ctr++) { - outptr = output_buf[ctr] + output_col; - - /* Even part */ - - /* Add fudge factor here for final descale. */ - tmp23 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); - tmp23 <<= CONST_BITS; - - z1 = (INT32) wsptr[2]; - z2 = (INT32) wsptr[4]; - z3 = (INT32) wsptr[6]; - - tmp20 = MULTIPLY(z2 - z3, FIX(0.881747734)); /* c4 */ - tmp22 = MULTIPLY(z1 - z2, FIX(0.314692123)); /* c6 */ - tmp21 = tmp20 + tmp22 + tmp23 - MULTIPLY(z2, FIX(1.841218003)); /* c2+c4-c6 */ - tmp10 = z1 + z3; - z2 -= tmp10; - tmp10 = MULTIPLY(tmp10, FIX(1.274162392)) + tmp23; /* c2 */ - tmp20 += tmp10 - MULTIPLY(z3, FIX(0.077722536)); /* c2-c4-c6 */ - tmp22 += tmp10 - MULTIPLY(z1, FIX(2.470602249)); /* c2+c4+c6 */ - tmp23 += MULTIPLY(z2, FIX(1.414213562)); /* c0 */ - - /* Odd part */ - - z1 = (INT32) wsptr[1]; - z2 = (INT32) wsptr[3]; - z3 = (INT32) wsptr[5]; - - tmp11 = MULTIPLY(z1 + z2, FIX(0.935414347)); /* (c3+c1-c5)/2 */ - tmp12 = MULTIPLY(z1 - z2, FIX(0.170262339)); /* (c3+c5-c1)/2 */ - tmp10 = tmp11 - tmp12; - tmp11 += tmp12; - tmp12 = MULTIPLY(z2 + z3, - FIX(1.378756276)); /* -c1 */ - tmp11 += tmp12; - z2 = MULTIPLY(z1 + z3, FIX(0.613604268)); /* c5 */ - tmp10 += z2; - tmp12 += z2 + MULTIPLY(z3, FIX(1.870828693)); /* c3+c1-c5 */ - - /* Final output stage */ - - outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp10, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp10, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp11, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp11, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp12, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp12, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp23, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - - wsptr += 7; /* advance pointer to next row */ - } -} - - -/* - * Perform dequantization and inverse DCT on one block of coefficients, - * producing a 6x12 output block. - * - * 12-point IDCT in pass 1 (columns), 6-point in pass 2 (rows). - */ - -GLOBAL(void) -jpeg_idct_6x12 (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, - JSAMPARRAY output_buf, JDIMENSION output_col) -{ - INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15; - INT32 tmp20, tmp21, tmp22, tmp23, tmp24, tmp25; - INT32 z1, z2, z3, z4; - JCOEFPTR inptr; - ISLOW_MULT_TYPE * quantptr; - int * wsptr; - JSAMPROW outptr; - JSAMPLE *range_limit = IDCT_range_limit(cinfo); - int ctr; - int workspace[6*12]; /* buffers data between passes */ - SHIFT_TEMPS - - /* Pass 1: process columns from input, store into work array. - * 12-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/24). - */ - inptr = coef_block; - quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; - wsptr = workspace; - for (ctr = 0; ctr < 6; ctr++, inptr++, quantptr++, wsptr++) { - /* Even part */ - - z3 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); - z3 <<= CONST_BITS; - /* Add fudge factor here for final descale. */ - z3 += ONE << (CONST_BITS-PASS1_BITS-1); - - z4 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); - z4 = MULTIPLY(z4, FIX(1.224744871)); /* c4 */ - - tmp10 = z3 + z4; - tmp11 = z3 - z4; - - z1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); - z4 = MULTIPLY(z1, FIX(1.366025404)); /* c2 */ - z1 <<= CONST_BITS; - z2 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); - z2 <<= CONST_BITS; - - tmp12 = z1 - z2; - - tmp21 = z3 + tmp12; - tmp24 = z3 - tmp12; - - tmp12 = z4 + z2; - - tmp20 = tmp10 + tmp12; - tmp25 = tmp10 - tmp12; - - tmp12 = z4 - z1 - z2; - - tmp22 = tmp11 + tmp12; - tmp23 = tmp11 - tmp12; - - /* Odd part */ - - z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); - z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); - z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); - z4 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); - - tmp11 = MULTIPLY(z2, FIX(1.306562965)); /* c3 */ - tmp14 = MULTIPLY(z2, - FIX_0_541196100); /* -c9 */ - - tmp10 = z1 + z3; - tmp15 = MULTIPLY(tmp10 + z4, FIX(0.860918669)); /* c7 */ - tmp12 = tmp15 + MULTIPLY(tmp10, FIX(0.261052384)); /* c5-c7 */ - tmp10 = tmp12 + tmp11 + MULTIPLY(z1, FIX(0.280143716)); /* c1-c5 */ - tmp13 = MULTIPLY(z3 + z4, - FIX(1.045510580)); /* -(c7+c11) */ - tmp12 += tmp13 + tmp14 - MULTIPLY(z3, FIX(1.478575242)); /* c1+c5-c7-c11 */ - tmp13 += tmp15 - tmp11 + MULTIPLY(z4, FIX(1.586706681)); /* c1+c11 */ - tmp15 += tmp14 - MULTIPLY(z1, FIX(0.676326758)) - /* c7-c11 */ - MULTIPLY(z4, FIX(1.982889723)); /* c5+c7 */ - - z1 -= z4; - z2 -= z3; - z3 = MULTIPLY(z1 + z2, FIX_0_541196100); /* c9 */ - tmp11 = z3 + MULTIPLY(z1, FIX_0_765366865); /* c3-c9 */ - tmp14 = z3 - MULTIPLY(z2, FIX_1_847759065); /* c3+c9 */ - - /* Final output stage */ - - wsptr[6*0] = (int) RIGHT_SHIFT(tmp20 + tmp10, CONST_BITS-PASS1_BITS); - wsptr[6*11] = (int) RIGHT_SHIFT(tmp20 - tmp10, CONST_BITS-PASS1_BITS); - wsptr[6*1] = (int) RIGHT_SHIFT(tmp21 + tmp11, CONST_BITS-PASS1_BITS); - wsptr[6*10] = (int) RIGHT_SHIFT(tmp21 - tmp11, CONST_BITS-PASS1_BITS); - wsptr[6*2] = (int) RIGHT_SHIFT(tmp22 + tmp12, CONST_BITS-PASS1_BITS); - wsptr[6*9] = (int) RIGHT_SHIFT(tmp22 - tmp12, CONST_BITS-PASS1_BITS); - wsptr[6*3] = (int) RIGHT_SHIFT(tmp23 + tmp13, CONST_BITS-PASS1_BITS); - wsptr[6*8] = (int) RIGHT_SHIFT(tmp23 - tmp13, CONST_BITS-PASS1_BITS); - wsptr[6*4] = (int) RIGHT_SHIFT(tmp24 + tmp14, CONST_BITS-PASS1_BITS); - wsptr[6*7] = (int) RIGHT_SHIFT(tmp24 - tmp14, CONST_BITS-PASS1_BITS); - wsptr[6*5] = (int) RIGHT_SHIFT(tmp25 + tmp15, CONST_BITS-PASS1_BITS); - wsptr[6*6] = (int) RIGHT_SHIFT(tmp25 - tmp15, CONST_BITS-PASS1_BITS); - } - - /* Pass 2: process 12 rows from work array, store into output array. - * 6-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/12). - */ - wsptr = workspace; - for (ctr = 0; ctr < 12; ctr++) { - outptr = output_buf[ctr] + output_col; - - /* Even part */ - - /* Add fudge factor here for final descale. */ - tmp10 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); - tmp10 <<= CONST_BITS; - tmp12 = (INT32) wsptr[4]; - tmp20 = MULTIPLY(tmp12, FIX(0.707106781)); /* c4 */ - tmp11 = tmp10 + tmp20; - tmp21 = tmp10 - tmp20 - tmp20; - tmp20 = (INT32) wsptr[2]; - tmp10 = MULTIPLY(tmp20, FIX(1.224744871)); /* c2 */ - tmp20 = tmp11 + tmp10; - tmp22 = tmp11 - tmp10; - - /* Odd part */ - - z1 = (INT32) wsptr[1]; - z2 = (INT32) wsptr[3]; - z3 = (INT32) wsptr[5]; - tmp11 = MULTIPLY(z1 + z3, FIX(0.366025404)); /* c5 */ - tmp10 = tmp11 + ((z1 + z2) << CONST_BITS); - tmp12 = tmp11 + ((z3 - z2) << CONST_BITS); - tmp11 = (z1 - z2 - z3) << CONST_BITS; - - /* Final output stage */ - - outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp10, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp10, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp11, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp11, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp12, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp12, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - - wsptr += 6; /* advance pointer to next row */ - } -} - - -/* - * Perform dequantization and inverse DCT on one block of coefficients, - * producing a 5x10 output block. - * - * 10-point IDCT in pass 1 (columns), 5-point in pass 2 (rows). - */ - -GLOBAL(void) -jpeg_idct_5x10 (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, - JSAMPARRAY output_buf, JDIMENSION output_col) -{ - INT32 tmp10, tmp11, tmp12, tmp13, tmp14; - INT32 tmp20, tmp21, tmp22, tmp23, tmp24; - INT32 z1, z2, z3, z4, z5; - JCOEFPTR inptr; - ISLOW_MULT_TYPE * quantptr; - int * wsptr; - JSAMPROW outptr; - JSAMPLE *range_limit = IDCT_range_limit(cinfo); - int ctr; - int workspace[5*10]; /* buffers data between passes */ - SHIFT_TEMPS - - /* Pass 1: process columns from input, store into work array. - * 10-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/20). - */ - inptr = coef_block; - quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; - wsptr = workspace; - for (ctr = 0; ctr < 5; ctr++, inptr++, quantptr++, wsptr++) { - /* Even part */ - - z3 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); - z3 <<= CONST_BITS; - /* Add fudge factor here for final descale. */ - z3 += ONE << (CONST_BITS-PASS1_BITS-1); - z4 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); - z1 = MULTIPLY(z4, FIX(1.144122806)); /* c4 */ - z2 = MULTIPLY(z4, FIX(0.437016024)); /* c8 */ - tmp10 = z3 + z1; - tmp11 = z3 - z2; - - tmp22 = RIGHT_SHIFT(z3 - ((z1 - z2) << 1), /* c0 = (c4-c8)*2 */ - CONST_BITS-PASS1_BITS); - - z2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); - z3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); - - z1 = MULTIPLY(z2 + z3, FIX(0.831253876)); /* c6 */ - tmp12 = z1 + MULTIPLY(z2, FIX(0.513743148)); /* c2-c6 */ - tmp13 = z1 - MULTIPLY(z3, FIX(2.176250899)); /* c2+c6 */ - - tmp20 = tmp10 + tmp12; - tmp24 = tmp10 - tmp12; - tmp21 = tmp11 + tmp13; - tmp23 = tmp11 - tmp13; - - /* Odd part */ - - z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); - z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); - z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); - z4 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); - - tmp11 = z2 + z4; - tmp13 = z2 - z4; - - tmp12 = MULTIPLY(tmp13, FIX(0.309016994)); /* (c3-c7)/2 */ - z5 = z3 << CONST_BITS; - - z2 = MULTIPLY(tmp11, FIX(0.951056516)); /* (c3+c7)/2 */ - z4 = z5 + tmp12; - - tmp10 = MULTIPLY(z1, FIX(1.396802247)) + z2 + z4; /* c1 */ - tmp14 = MULTIPLY(z1, FIX(0.221231742)) - z2 + z4; /* c9 */ - - z2 = MULTIPLY(tmp11, FIX(0.587785252)); /* (c1-c9)/2 */ - z4 = z5 - tmp12 - (tmp13 << (CONST_BITS - 1)); - - tmp12 = (z1 - tmp13 - z3) << PASS1_BITS; - - tmp11 = MULTIPLY(z1, FIX(1.260073511)) - z2 - z4; /* c3 */ - tmp13 = MULTIPLY(z1, FIX(0.642039522)) - z2 + z4; /* c7 */ - - /* Final output stage */ - - wsptr[5*0] = (int) RIGHT_SHIFT(tmp20 + tmp10, CONST_BITS-PASS1_BITS); - wsptr[5*9] = (int) RIGHT_SHIFT(tmp20 - tmp10, CONST_BITS-PASS1_BITS); - wsptr[5*1] = (int) RIGHT_SHIFT(tmp21 + tmp11, CONST_BITS-PASS1_BITS); - wsptr[5*8] = (int) RIGHT_SHIFT(tmp21 - tmp11, CONST_BITS-PASS1_BITS); - wsptr[5*2] = (int) (tmp22 + tmp12); - wsptr[5*7] = (int) (tmp22 - tmp12); - wsptr[5*3] = (int) RIGHT_SHIFT(tmp23 + tmp13, CONST_BITS-PASS1_BITS); - wsptr[5*6] = (int) RIGHT_SHIFT(tmp23 - tmp13, CONST_BITS-PASS1_BITS); - wsptr[5*4] = (int) RIGHT_SHIFT(tmp24 + tmp14, CONST_BITS-PASS1_BITS); - wsptr[5*5] = (int) RIGHT_SHIFT(tmp24 - tmp14, CONST_BITS-PASS1_BITS); - } - - /* Pass 2: process 10 rows from work array, store into output array. - * 5-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/10). - */ - wsptr = workspace; - for (ctr = 0; ctr < 10; ctr++) { - outptr = output_buf[ctr] + output_col; - - /* Even part */ - - /* Add fudge factor here for final descale. */ - tmp12 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); - tmp12 <<= CONST_BITS; - tmp13 = (INT32) wsptr[2]; - tmp14 = (INT32) wsptr[4]; - z1 = MULTIPLY(tmp13 + tmp14, FIX(0.790569415)); /* (c2+c4)/2 */ - z2 = MULTIPLY(tmp13 - tmp14, FIX(0.353553391)); /* (c2-c4)/2 */ - z3 = tmp12 + z2; - tmp10 = z3 + z1; - tmp11 = z3 - z1; - tmp12 -= z2 << 2; - - /* Odd part */ - - z2 = (INT32) wsptr[1]; - z3 = (INT32) wsptr[3]; - - z1 = MULTIPLY(z2 + z3, FIX(0.831253876)); /* c3 */ - tmp13 = z1 + MULTIPLY(z2, FIX(0.513743148)); /* c1-c3 */ - tmp14 = z1 - MULTIPLY(z3, FIX(2.176250899)); /* c1+c3 */ - - /* Final output stage */ - - outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp13, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp13, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp11 + tmp14, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp11 - tmp14, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp12, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - - wsptr += 5; /* advance pointer to next row */ - } -} - - -/* - * Perform dequantization and inverse DCT on one block of coefficients, - * producing a 4x8 output block. - * - * 8-point IDCT in pass 1 (columns), 4-point in pass 2 (rows). - */ - -GLOBAL(void) -jpeg_idct_4x8 (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, - JSAMPARRAY output_buf, JDIMENSION output_col) -{ - INT32 tmp0, tmp1, tmp2, tmp3; - INT32 tmp10, tmp11, tmp12, tmp13; - INT32 z1, z2, z3; - JCOEFPTR inptr; - ISLOW_MULT_TYPE * quantptr; - int * wsptr; - JSAMPROW outptr; - JSAMPLE *range_limit = IDCT_range_limit(cinfo); - int ctr; - int workspace[4*8]; /* buffers data between passes */ - SHIFT_TEMPS - - /* Pass 1: process columns from input, store into work array. */ - /* Note results are scaled up by sqrt(8) compared to a true IDCT; */ - /* furthermore, we scale the results by 2**PASS1_BITS. */ - - inptr = coef_block; - quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; - wsptr = workspace; - for (ctr = 4; ctr > 0; ctr--) { - /* Due to quantization, we will usually find that many of the input - * coefficients are zero, especially the AC terms. We can exploit this - * by short-circuiting the IDCT calculation for any column in which all - * the AC terms are zero. In that case each output is equal to the - * DC coefficient (with scale factor as needed). - * With typical images and quantization tables, half or more of the - * column DCT calculations can be simplified this way. - */ - - if (inptr[DCTSIZE*1] == 0 && inptr[DCTSIZE*2] == 0 && - inptr[DCTSIZE*3] == 0 && inptr[DCTSIZE*4] == 0 && - inptr[DCTSIZE*5] == 0 && inptr[DCTSIZE*6] == 0 && - inptr[DCTSIZE*7] == 0) { - /* AC terms all zero */ - int dcval = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]) << PASS1_BITS; - - wsptr[4*0] = dcval; - wsptr[4*1] = dcval; - wsptr[4*2] = dcval; - wsptr[4*3] = dcval; - wsptr[4*4] = dcval; - wsptr[4*5] = dcval; - wsptr[4*6] = dcval; - wsptr[4*7] = dcval; - - inptr++; /* advance pointers to next column */ - quantptr++; - wsptr++; - continue; - } - - /* Even part: reverse the even part of the forward DCT. */ - /* The rotator is sqrt(2)*c(-6). */ - - z2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); - z3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); - - z1 = MULTIPLY(z2 + z3, FIX_0_541196100); - tmp2 = z1 + MULTIPLY(z2, FIX_0_765366865); - tmp3 = z1 - MULTIPLY(z3, FIX_1_847759065); - - z2 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); - z3 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); - z2 <<= CONST_BITS; - z3 <<= CONST_BITS; - /* Add fudge factor here for final descale. */ - z2 += ONE << (CONST_BITS-PASS1_BITS-1); - - tmp0 = z2 + z3; - tmp1 = z2 - z3; - - tmp10 = tmp0 + tmp2; - tmp13 = tmp0 - tmp2; - tmp11 = tmp1 + tmp3; - tmp12 = tmp1 - tmp3; - - /* Odd part per figure 8; the matrix is unitary and hence its - * transpose is its inverse. i0..i3 are y7,y5,y3,y1 respectively. - */ - - tmp0 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); - tmp1 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); - tmp2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); - tmp3 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); - - z2 = tmp0 + tmp2; - z3 = tmp1 + tmp3; - - z1 = MULTIPLY(z2 + z3, FIX_1_175875602); /* sqrt(2) * c3 */ - z2 = MULTIPLY(z2, - FIX_1_961570560); /* sqrt(2) * (-c3-c5) */ - z3 = MULTIPLY(z3, - FIX_0_390180644); /* sqrt(2) * (c5-c3) */ - z2 += z1; - z3 += z1; - - z1 = MULTIPLY(tmp0 + tmp3, - FIX_0_899976223); /* sqrt(2) * (c7-c3) */ - tmp0 = MULTIPLY(tmp0, FIX_0_298631336); /* sqrt(2) * (-c1+c3+c5-c7) */ - tmp3 = MULTIPLY(tmp3, FIX_1_501321110); /* sqrt(2) * ( c1+c3-c5-c7) */ - tmp0 += z1 + z2; - tmp3 += z1 + z3; - - z1 = MULTIPLY(tmp1 + tmp2, - FIX_2_562915447); /* sqrt(2) * (-c1-c3) */ - tmp1 = MULTIPLY(tmp1, FIX_2_053119869); /* sqrt(2) * ( c1+c3-c5+c7) */ - tmp2 = MULTIPLY(tmp2, FIX_3_072711026); /* sqrt(2) * ( c1+c3+c5-c7) */ - tmp1 += z1 + z3; - tmp2 += z1 + z2; - - /* Final output stage: inputs are tmp10..tmp13, tmp0..tmp3 */ - - wsptr[4*0] = (int) RIGHT_SHIFT(tmp10 + tmp3, CONST_BITS-PASS1_BITS); - wsptr[4*7] = (int) RIGHT_SHIFT(tmp10 - tmp3, CONST_BITS-PASS1_BITS); - wsptr[4*1] = (int) RIGHT_SHIFT(tmp11 + tmp2, CONST_BITS-PASS1_BITS); - wsptr[4*6] = (int) RIGHT_SHIFT(tmp11 - tmp2, CONST_BITS-PASS1_BITS); - wsptr[4*2] = (int) RIGHT_SHIFT(tmp12 + tmp1, CONST_BITS-PASS1_BITS); - wsptr[4*5] = (int) RIGHT_SHIFT(tmp12 - tmp1, CONST_BITS-PASS1_BITS); - wsptr[4*3] = (int) RIGHT_SHIFT(tmp13 + tmp0, CONST_BITS-PASS1_BITS); - wsptr[4*4] = (int) RIGHT_SHIFT(tmp13 - tmp0, CONST_BITS-PASS1_BITS); - - inptr++; /* advance pointers to next column */ - quantptr++; - wsptr++; - } - - /* Pass 2: process 8 rows from work array, store into output array. - * 4-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/16). - */ - wsptr = workspace; - for (ctr = 0; ctr < 8; ctr++) { - outptr = output_buf[ctr] + output_col; - - /* Even part */ - - /* Add fudge factor here for final descale. */ - tmp0 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); - tmp2 = (INT32) wsptr[2]; - - tmp10 = (tmp0 + tmp2) << CONST_BITS; - tmp12 = (tmp0 - tmp2) << CONST_BITS; - - /* Odd part */ - /* Same rotation as in the even part of the 8x8 LL&M IDCT */ - - z2 = (INT32) wsptr[1]; - z3 = (INT32) wsptr[3]; - - z1 = MULTIPLY(z2 + z3, FIX_0_541196100); /* c6 */ - tmp0 = z1 + MULTIPLY(z2, FIX_0_765366865); /* c2-c6 */ - tmp2 = z1 - MULTIPLY(z3, FIX_1_847759065); /* c2+c6 */ - - /* Final output stage */ - - outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp0, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp0, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp12 + tmp2, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp12 - tmp2, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - - wsptr += 4; /* advance pointer to next row */ - } -} - - -/* - * Perform dequantization and inverse DCT on one block of coefficients, - * producing a reduced-size 3x6 output block. - * - * 6-point IDCT in pass 1 (columns), 3-point in pass 2 (rows). - */ - -GLOBAL(void) -jpeg_idct_3x6 (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, - JSAMPARRAY output_buf, JDIMENSION output_col) -{ - INT32 tmp0, tmp1, tmp2, tmp10, tmp11, tmp12; - INT32 z1, z2, z3; - JCOEFPTR inptr; - ISLOW_MULT_TYPE * quantptr; - int * wsptr; - JSAMPROW outptr; - JSAMPLE *range_limit = IDCT_range_limit(cinfo); - int ctr; - int workspace[3*6]; /* buffers data between passes */ - SHIFT_TEMPS - - /* Pass 1: process columns from input, store into work array. - * 6-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/12). - */ - inptr = coef_block; - quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; - wsptr = workspace; - for (ctr = 0; ctr < 3; ctr++, inptr++, quantptr++, wsptr++) { - /* Even part */ - - tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); - tmp0 <<= CONST_BITS; - /* Add fudge factor here for final descale. */ - tmp0 += ONE << (CONST_BITS-PASS1_BITS-1); - tmp2 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); - tmp10 = MULTIPLY(tmp2, FIX(0.707106781)); /* c4 */ - tmp1 = tmp0 + tmp10; - tmp11 = RIGHT_SHIFT(tmp0 - tmp10 - tmp10, CONST_BITS-PASS1_BITS); - tmp10 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); - tmp0 = MULTIPLY(tmp10, FIX(1.224744871)); /* c2 */ - tmp10 = tmp1 + tmp0; - tmp12 = tmp1 - tmp0; - - /* Odd part */ - - z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); - z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); - z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); - tmp1 = MULTIPLY(z1 + z3, FIX(0.366025404)); /* c5 */ - tmp0 = tmp1 + ((z1 + z2) << CONST_BITS); - tmp2 = tmp1 + ((z3 - z2) << CONST_BITS); - tmp1 = (z1 - z2 - z3) << PASS1_BITS; - - /* Final output stage */ - - wsptr[3*0] = (int) RIGHT_SHIFT(tmp10 + tmp0, CONST_BITS-PASS1_BITS); - wsptr[3*5] = (int) RIGHT_SHIFT(tmp10 - tmp0, CONST_BITS-PASS1_BITS); - wsptr[3*1] = (int) (tmp11 + tmp1); - wsptr[3*4] = (int) (tmp11 - tmp1); - wsptr[3*2] = (int) RIGHT_SHIFT(tmp12 + tmp2, CONST_BITS-PASS1_BITS); - wsptr[3*3] = (int) RIGHT_SHIFT(tmp12 - tmp2, CONST_BITS-PASS1_BITS); - } - - /* Pass 2: process 6 rows from work array, store into output array. - * 3-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/6). - */ - wsptr = workspace; - for (ctr = 0; ctr < 6; ctr++) { - outptr = output_buf[ctr] + output_col; - - /* Even part */ - - /* Add fudge factor here for final descale. */ - tmp0 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); - tmp0 <<= CONST_BITS; - tmp2 = (INT32) wsptr[2]; - tmp12 = MULTIPLY(tmp2, FIX(0.707106781)); /* c2 */ - tmp10 = tmp0 + tmp12; - tmp2 = tmp0 - tmp12 - tmp12; - - /* Odd part */ - - tmp12 = (INT32) wsptr[1]; - tmp0 = MULTIPLY(tmp12, FIX(1.224744871)); /* c1 */ - - /* Final output stage */ - - outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp0, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp0, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp2, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - - wsptr += 3; /* advance pointer to next row */ - } -} - - -/* - * Perform dequantization and inverse DCT on one block of coefficients, - * producing a 2x4 output block. - * - * 4-point IDCT in pass 1 (columns), 2-point in pass 2 (rows). - */ - -GLOBAL(void) -jpeg_idct_2x4 (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, - JSAMPARRAY output_buf, JDIMENSION output_col) -{ - INT32 tmp0, tmp2, tmp10, tmp12; - INT32 z1, z2, z3; - JCOEFPTR inptr; - ISLOW_MULT_TYPE * quantptr; - INT32 * wsptr; - JSAMPROW outptr; - JSAMPLE *range_limit = IDCT_range_limit(cinfo); - int ctr; - INT32 workspace[2*4]; /* buffers data between passes */ - SHIFT_TEMPS - - /* Pass 1: process columns from input, store into work array. - * 4-point IDCT kernel, - * cK represents sqrt(2) * cos(K*pi/16) [refers to 8-point IDCT]. - */ - inptr = coef_block; - quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; - wsptr = workspace; - for (ctr = 0; ctr < 2; ctr++, inptr++, quantptr++, wsptr++) { - /* Even part */ - - tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); - tmp2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); - - tmp10 = (tmp0 + tmp2) << CONST_BITS; - tmp12 = (tmp0 - tmp2) << CONST_BITS; - - /* Odd part */ - /* Same rotation as in the even part of the 8x8 LL&M IDCT */ - - z2 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); - z3 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); - - z1 = MULTIPLY(z2 + z3, FIX_0_541196100); /* c6 */ - tmp0 = z1 + MULTIPLY(z2, FIX_0_765366865); /* c2-c6 */ - tmp2 = z1 - MULTIPLY(z3, FIX_1_847759065); /* c2+c6 */ - - /* Final output stage */ - - wsptr[2*0] = tmp10 + tmp0; - wsptr[2*3] = tmp10 - tmp0; - wsptr[2*1] = tmp12 + tmp2; - wsptr[2*2] = tmp12 - tmp2; - } - - /* Pass 2: process 4 rows from work array, store into output array. */ - - wsptr = workspace; - for (ctr = 0; ctr < 4; ctr++) { - outptr = output_buf[ctr] + output_col; - - /* Even part */ - - /* Add fudge factor here for final descale. */ - tmp10 = wsptr[0] + (ONE << (CONST_BITS+2)); - - /* Odd part */ - - tmp0 = wsptr[1]; - - /* Final output stage */ - - outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp0, CONST_BITS+3) - & RANGE_MASK]; - outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp0, CONST_BITS+3) - & RANGE_MASK]; - - wsptr += 2; /* advance pointer to next row */ - } -} - - -/* - * Perform dequantization and inverse DCT on one block of coefficients, - * producing a 1x2 output block. - * - * 2-point IDCT in pass 1 (columns), 1-point in pass 2 (rows). - */ - -GLOBAL(void) -jpeg_idct_1x2 (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, - JSAMPARRAY output_buf, JDIMENSION output_col) -{ - INT32 tmp0, tmp10; - ISLOW_MULT_TYPE * quantptr; - JSAMPLE *range_limit = IDCT_range_limit(cinfo); - SHIFT_TEMPS - - /* Process 1 column from input, store into output array. */ - - quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; - - /* Even part */ - - tmp10 = DEQUANTIZE(coef_block[DCTSIZE*0], quantptr[DCTSIZE*0]); - /* Add fudge factor here for final descale. */ - tmp10 += ONE << 2; - - /* Odd part */ - - tmp0 = DEQUANTIZE(coef_block[DCTSIZE*1], quantptr[DCTSIZE*1]); - - /* Final output stage */ - - output_buf[0][output_col] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp0, 3) - & RANGE_MASK]; - output_buf[1][output_col] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp0, 3) - & RANGE_MASK]; -} - -#endif /* IDCT_SCALING_SUPPORTED */ -#endif /* DCT_ISLOW_SUPPORTED */ diff --git a/jpeg/jinclude.h b/jpeg/jinclude.h deleted file mode 100755 index 0a4f151..0000000 --- a/jpeg/jinclude.h +++ /dev/null @@ -1,91 +0,0 @@ -/* - * jinclude.h - * - * Copyright (C) 1991-1994, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file exists to provide a single place to fix any problems with - * including the wrong system include files. (Common problems are taken - * care of by the standard jconfig symbols, but on really weird systems - * you may have to edit this file.) - * - * NOTE: this file is NOT intended to be included by applications using the - * JPEG library. Most applications need only include jpeglib.h. - */ - - -/* Include auto-config file to find out which system include files we need. */ - -#include "jconfig.h" /* auto configuration options */ -#define JCONFIG_INCLUDED /* so that jpeglib.h doesn't do it again */ - -/* - * We need the NULL macro and size_t typedef. - * On an ANSI-conforming system it is sufficient to include . - * Otherwise, we get them from or ; we may have to - * pull in as well. - * Note that the core JPEG library does not require ; - * only the default error handler and data source/destination modules do. - * But we must pull it in because of the references to FILE in jpeglib.h. - * You can remove those references if you want to compile without . - */ - -#ifdef HAVE_STDDEF_H -#include -#endif - -#ifdef HAVE_STDLIB_H -#include -#endif - -#ifdef NEED_SYS_TYPES_H -#include -#endif - -#include - -/* - * We need memory copying and zeroing functions, plus strncpy(). - * ANSI and System V implementations declare these in . - * BSD doesn't have the mem() functions, but it does have bcopy()/bzero(). - * Some systems may declare memset and memcpy in . - * - * NOTE: we assume the size parameters to these functions are of type size_t. - * Change the casts in these macros if not! - */ - -#ifdef NEED_BSD_STRINGS - -#include -#define MEMZERO(target,size) bzero((void *)(target), (size_t)(size)) -#define MEMCOPY(dest,src,size) bcopy((const void *)(src), (void *)(dest), (size_t)(size)) - -#else /* not BSD, assume ANSI/SysV string lib */ - -#include -#define MEMZERO(target,size) memset((void *)(target), 0, (size_t)(size)) -#define MEMCOPY(dest,src,size) memcpy((void *)(dest), (const void *)(src), (size_t)(size)) - -#endif - -/* - * In ANSI C, and indeed any rational implementation, size_t is also the - * type returned by sizeof(). However, it seems there are some irrational - * implementations out there, in which sizeof() returns an int even though - * size_t is defined as long or unsigned long. To ensure consistent results - * we always use this SIZEOF() macro in place of using sizeof() directly. - */ - -#define SIZEOF(object) ((size_t) sizeof(object)) - -/* - * The modules that use fread() and fwrite() always invoke them through - * these macros. On some systems you may need to twiddle the argument casts. - * CAUTION: argument order is different from underlying functions! - */ - -#define JFREAD(file,buf,sizeofbuf) \ - ((size_t) fread((void *) (buf), (size_t) 1, (size_t) (sizeofbuf), (file))) -#define JFWRITE(file,buf,sizeofbuf) \ - ((size_t) fwrite((const void *) (buf), (size_t) 1, (size_t) (sizeofbuf), (file))) diff --git a/jpeg/jmemansi.c b/jpeg/jmemansi.c deleted file mode 100755 index 2d93e49..0000000 --- a/jpeg/jmemansi.c +++ /dev/null @@ -1,167 +0,0 @@ -/* - * jmemansi.c - * - * Copyright (C) 1992-1996, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file provides a simple generic implementation of the system- - * dependent portion of the JPEG memory manager. This implementation - * assumes that you have the ANSI-standard library routine tmpfile(). - * Also, the problem of determining the amount of memory available - * is shoved onto the user. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" -#include "jmemsys.h" /* import the system-dependent declarations */ - -#ifndef HAVE_STDLIB_H /* should declare malloc(),free() */ -extern void * malloc JPP((size_t size)); -extern void free JPP((void *ptr)); -#endif - -#ifndef SEEK_SET /* pre-ANSI systems may not define this; */ -#define SEEK_SET 0 /* if not, assume 0 is correct */ -#endif - - -/* - * Memory allocation and freeing are controlled by the regular library - * routines malloc() and free(). - */ - -GLOBAL(void *) -jpeg_get_small (j_common_ptr cinfo, size_t sizeofobject) -{ - return (void *) malloc(sizeofobject); -} - -GLOBAL(void) -jpeg_free_small (j_common_ptr cinfo, void * object, size_t sizeofobject) -{ - free(object); -} - - -/* - * "Large" objects are treated the same as "small" ones. - * NB: although we include FAR keywords in the routine declarations, - * this file won't actually work in 80x86 small/medium model; at least, - * you probably won't be able to process useful-size images in only 64KB. - */ - -GLOBAL(void FAR *) -jpeg_get_large (j_common_ptr cinfo, size_t sizeofobject) -{ - return (void FAR *) malloc(sizeofobject); -} - -GLOBAL(void) -jpeg_free_large (j_common_ptr cinfo, void FAR * object, size_t sizeofobject) -{ - free(object); -} - - -/* - * This routine computes the total memory space available for allocation. - * It's impossible to do this in a portable way; our current solution is - * to make the user tell us (with a default value set at compile time). - * If you can actually get the available space, it's a good idea to subtract - * a slop factor of 5% or so. - */ - -#ifndef DEFAULT_MAX_MEM /* so can override from makefile */ -#define DEFAULT_MAX_MEM 1000000L /* default: one megabyte */ -#endif - -GLOBAL(long) -jpeg_mem_available (j_common_ptr cinfo, long min_bytes_needed, - long max_bytes_needed, long already_allocated) -{ - return cinfo->mem->max_memory_to_use - already_allocated; -} - - -/* - * Backing store (temporary file) management. - * Backing store objects are only used when the value returned by - * jpeg_mem_available is less than the total space needed. You can dispense - * with these routines if you have plenty of virtual memory; see jmemnobs.c. - */ - - -METHODDEF(void) -read_backing_store (j_common_ptr cinfo, backing_store_ptr info, - void FAR * buffer_address, - long file_offset, long byte_count) -{ - if (fseek(info->temp_file, file_offset, SEEK_SET)) - ERREXIT(cinfo, JERR_TFILE_SEEK); - if (JFREAD(info->temp_file, buffer_address, byte_count) - != (size_t) byte_count) - ERREXIT(cinfo, JERR_TFILE_READ); -} - - -METHODDEF(void) -write_backing_store (j_common_ptr cinfo, backing_store_ptr info, - void FAR * buffer_address, - long file_offset, long byte_count) -{ - if (fseek(info->temp_file, file_offset, SEEK_SET)) - ERREXIT(cinfo, JERR_TFILE_SEEK); - if (JFWRITE(info->temp_file, buffer_address, byte_count) - != (size_t) byte_count) - ERREXIT(cinfo, JERR_TFILE_WRITE); -} - - -METHODDEF(void) -close_backing_store (j_common_ptr cinfo, backing_store_ptr info) -{ - fclose(info->temp_file); - /* Since this implementation uses tmpfile() to create the file, - * no explicit file deletion is needed. - */ -} - - -/* - * Initial opening of a backing-store object. - * - * This version uses tmpfile(), which constructs a suitable file name - * behind the scenes. We don't have to use info->temp_name[] at all; - * indeed, we can't even find out the actual name of the temp file. - */ - -GLOBAL(void) -jpeg_open_backing_store (j_common_ptr cinfo, backing_store_ptr info, - long total_bytes_needed) -{ - if ((info->temp_file = tmpfile()) == NULL) - ERREXITS(cinfo, JERR_TFILE_CREATE, ""); - info->read_backing_store = read_backing_store; - info->write_backing_store = write_backing_store; - info->close_backing_store = close_backing_store; -} - - -/* - * These routines take care of any system-dependent initialization and - * cleanup required. - */ - -GLOBAL(long) -jpeg_mem_init (j_common_ptr cinfo) -{ - return DEFAULT_MAX_MEM; /* default for max_memory_to_use */ -} - -GLOBAL(void) -jpeg_mem_term (j_common_ptr cinfo) -{ - /* no work */ -} diff --git a/jpeg/jmemdos.c b/jpeg/jmemdos.c deleted file mode 100755 index 60b45c6..0000000 --- a/jpeg/jmemdos.c +++ /dev/null @@ -1,638 +0,0 @@ -/* - * jmemdos.c - * - * Copyright (C) 1992-1997, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file provides an MS-DOS-compatible implementation of the system- - * dependent portion of the JPEG memory manager. Temporary data can be - * stored in extended or expanded memory as well as in regular DOS files. - * - * If you use this file, you must be sure that NEED_FAR_POINTERS is defined - * if you compile in a small-data memory model; it should NOT be defined if - * you use a large-data memory model. This file is not recommended if you - * are using a flat-memory-space 386 environment such as DJGCC or Watcom C. - * Also, this code will NOT work if struct fields are aligned on greater than - * 2-byte boundaries. - * - * Based on code contributed by Ge' Weijers. - */ - -/* - * If you have both extended and expanded memory, you may want to change the - * order in which they are tried in jopen_backing_store. On a 286 machine - * expanded memory is usually faster, since extended memory access involves - * an expensive protected-mode-and-back switch. On 386 and better, extended - * memory is usually faster. As distributed, the code tries extended memory - * first (what? not everyone has a 386? :-). - * - * You can disable use of extended/expanded memory entirely by altering these - * definitions or overriding them from the Makefile (eg, -DEMS_SUPPORTED=0). - */ - -#ifndef XMS_SUPPORTED -#define XMS_SUPPORTED 1 -#endif -#ifndef EMS_SUPPORTED -#define EMS_SUPPORTED 1 -#endif - - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" -#include "jmemsys.h" /* import the system-dependent declarations */ - -#ifndef HAVE_STDLIB_H /* should declare these */ -extern void * malloc JPP((size_t size)); -extern void free JPP((void *ptr)); -extern char * getenv JPP((const char * name)); -#endif - -#ifdef NEED_FAR_POINTERS - -#ifdef __TURBOC__ -/* These definitions work for Borland C (Turbo C) */ -#include /* need farmalloc(), farfree() */ -#define far_malloc(x) farmalloc(x) -#define far_free(x) farfree(x) -#else -/* These definitions work for Microsoft C and compatible compilers */ -#include /* need _fmalloc(), _ffree() */ -#define far_malloc(x) _fmalloc(x) -#define far_free(x) _ffree(x) -#endif - -#else /* not NEED_FAR_POINTERS */ - -#define far_malloc(x) malloc(x) -#define far_free(x) free(x) - -#endif /* NEED_FAR_POINTERS */ - -#ifdef DONT_USE_B_MODE /* define mode parameters for fopen() */ -#define READ_BINARY "r" -#else -#define READ_BINARY "rb" -#endif - -#ifndef USE_MSDOS_MEMMGR /* make sure user got configuration right */ - You forgot to define USE_MSDOS_MEMMGR in jconfig.h. /* deliberate syntax error */ -#endif - -#if MAX_ALLOC_CHUNK >= 65535L /* make sure jconfig.h got this right */ - MAX_ALLOC_CHUNK should be less than 64K. /* deliberate syntax error */ -#endif - - -/* - * Declarations for assembly-language support routines (see jmemdosa.asm). - * - * The functions are declared "far" as are all their pointer arguments; - * this ensures the assembly source code will work regardless of the - * compiler memory model. We assume "short" is 16 bits, "long" is 32. - */ - -typedef void far * XMSDRIVER; /* actually a pointer to code */ -typedef struct { /* registers for calling XMS driver */ - unsigned short ax, dx, bx; - void far * ds_si; - } XMScontext; -typedef struct { /* registers for calling EMS driver */ - unsigned short ax, dx, bx; - void far * ds_si; - } EMScontext; - -extern short far jdos_open JPP((short far * handle, char far * filename)); -extern short far jdos_close JPP((short handle)); -extern short far jdos_seek JPP((short handle, long offset)); -extern short far jdos_read JPP((short handle, void far * buffer, - unsigned short count)); -extern short far jdos_write JPP((short handle, void far * buffer, - unsigned short count)); -extern void far jxms_getdriver JPP((XMSDRIVER far *)); -extern void far jxms_calldriver JPP((XMSDRIVER, XMScontext far *)); -extern short far jems_available JPP((void)); -extern void far jems_calldriver JPP((EMScontext far *)); - - -/* - * Selection of a file name for a temporary file. - * This is highly system-dependent, and you may want to customize it. - */ - -static int next_file_num; /* to distinguish among several temp files */ - -LOCAL(void) -select_file_name (char * fname) -{ - const char * env; - char * ptr; - FILE * tfile; - - /* Keep generating file names till we find one that's not in use */ - for (;;) { - /* Get temp directory name from environment TMP or TEMP variable; - * if none, use "." - */ - if ((env = (const char *) getenv("TMP")) == NULL) - if ((env = (const char *) getenv("TEMP")) == NULL) - env = "."; - if (*env == '\0') /* null string means "." */ - env = "."; - ptr = fname; /* copy name to fname */ - while (*env != '\0') - *ptr++ = *env++; - if (ptr[-1] != '\\' && ptr[-1] != '/') - *ptr++ = '\\'; /* append backslash if not in env variable */ - /* Append a suitable file name */ - next_file_num++; /* advance counter */ - sprintf(ptr, "JPG%03d.TMP", next_file_num); - /* Probe to see if file name is already in use */ - if ((tfile = fopen(fname, READ_BINARY)) == NULL) - break; - fclose(tfile); /* oops, it's there; close tfile & try again */ - } -} - - -/* - * Near-memory allocation and freeing are controlled by the regular library - * routines malloc() and free(). - */ - -GLOBAL(void *) -jpeg_get_small (j_common_ptr cinfo, size_t sizeofobject) -{ - return (void *) malloc(sizeofobject); -} - -GLOBAL(void) -jpeg_free_small (j_common_ptr cinfo, void * object, size_t sizeofobject) -{ - free(object); -} - - -/* - * "Large" objects are allocated in far memory, if possible - */ - -GLOBAL(void FAR *) -jpeg_get_large (j_common_ptr cinfo, size_t sizeofobject) -{ - return (void FAR *) far_malloc(sizeofobject); -} - -GLOBAL(void) -jpeg_free_large (j_common_ptr cinfo, void FAR * object, size_t sizeofobject) -{ - far_free(object); -} - - -/* - * This routine computes the total memory space available for allocation. - * It's impossible to do this in a portable way; our current solution is - * to make the user tell us (with a default value set at compile time). - * If you can actually get the available space, it's a good idea to subtract - * a slop factor of 5% or so. - */ - -#ifndef DEFAULT_MAX_MEM /* so can override from makefile */ -#define DEFAULT_MAX_MEM 300000L /* for total usage about 450K */ -#endif - -GLOBAL(long) -jpeg_mem_available (j_common_ptr cinfo, long min_bytes_needed, - long max_bytes_needed, long already_allocated) -{ - return cinfo->mem->max_memory_to_use - already_allocated; -} - - -/* - * Backing store (temporary file) management. - * Backing store objects are only used when the value returned by - * jpeg_mem_available is less than the total space needed. You can dispense - * with these routines if you have plenty of virtual memory; see jmemnobs.c. - */ - -/* - * For MS-DOS we support three types of backing storage: - * 1. Conventional DOS files. We access these by direct DOS calls rather - * than via the stdio package. This provides a bit better performance, - * but the real reason is that the buffers to be read or written are FAR. - * The stdio library for small-data memory models can't cope with that. - * 2. Extended memory, accessed per the XMS V2.0 specification. - * 3. Expanded memory, accessed per the LIM/EMS 4.0 specification. - * You'll need copies of those specs to make sense of the related code. - * The specs are available by Internet FTP from the SIMTEL archives - * (oak.oakland.edu and its various mirror sites). See files - * pub/msdos/microsoft/xms20.arc and pub/msdos/info/limems41.zip. - */ - - -/* - * Access methods for a DOS file. - */ - - -METHODDEF(void) -read_file_store (j_common_ptr cinfo, backing_store_ptr info, - void FAR * buffer_address, - long file_offset, long byte_count) -{ - if (jdos_seek(info->handle.file_handle, file_offset)) - ERREXIT(cinfo, JERR_TFILE_SEEK); - /* Since MAX_ALLOC_CHUNK is less than 64K, byte_count will be too. */ - if (byte_count > 65535L) /* safety check */ - ERREXIT(cinfo, JERR_BAD_ALLOC_CHUNK); - if (jdos_read(info->handle.file_handle, buffer_address, - (unsigned short) byte_count)) - ERREXIT(cinfo, JERR_TFILE_READ); -} - - -METHODDEF(void) -write_file_store (j_common_ptr cinfo, backing_store_ptr info, - void FAR * buffer_address, - long file_offset, long byte_count) -{ - if (jdos_seek(info->handle.file_handle, file_offset)) - ERREXIT(cinfo, JERR_TFILE_SEEK); - /* Since MAX_ALLOC_CHUNK is less than 64K, byte_count will be too. */ - if (byte_count > 65535L) /* safety check */ - ERREXIT(cinfo, JERR_BAD_ALLOC_CHUNK); - if (jdos_write(info->handle.file_handle, buffer_address, - (unsigned short) byte_count)) - ERREXIT(cinfo, JERR_TFILE_WRITE); -} - - -METHODDEF(void) -close_file_store (j_common_ptr cinfo, backing_store_ptr info) -{ - jdos_close(info->handle.file_handle); /* close the file */ - remove(info->temp_name); /* delete the file */ -/* If your system doesn't have remove(), try unlink() instead. - * remove() is the ANSI-standard name for this function, but - * unlink() was more common in pre-ANSI systems. - */ - TRACEMSS(cinfo, 1, JTRC_TFILE_CLOSE, info->temp_name); -} - - -LOCAL(boolean) -open_file_store (j_common_ptr cinfo, backing_store_ptr info, - long total_bytes_needed) -{ - short handle; - - select_file_name(info->temp_name); - if (jdos_open((short far *) & handle, (char far *) info->temp_name)) { - /* might as well exit since jpeg_open_backing_store will fail anyway */ - ERREXITS(cinfo, JERR_TFILE_CREATE, info->temp_name); - return FALSE; - } - info->handle.file_handle = handle; - info->read_backing_store = read_file_store; - info->write_backing_store = write_file_store; - info->close_backing_store = close_file_store; - TRACEMSS(cinfo, 1, JTRC_TFILE_OPEN, info->temp_name); - return TRUE; /* succeeded */ -} - - -/* - * Access methods for extended memory. - */ - -#if XMS_SUPPORTED - -static XMSDRIVER xms_driver; /* saved address of XMS driver */ - -typedef union { /* either long offset or real-mode pointer */ - long offset; - void far * ptr; - } XMSPTR; - -typedef struct { /* XMS move specification structure */ - long length; - XMSH src_handle; - XMSPTR src; - XMSH dst_handle; - XMSPTR dst; - } XMSspec; - -#define ODD(X) (((X) & 1L) != 0) - - -METHODDEF(void) -read_xms_store (j_common_ptr cinfo, backing_store_ptr info, - void FAR * buffer_address, - long file_offset, long byte_count) -{ - XMScontext ctx; - XMSspec spec; - char endbuffer[2]; - - /* The XMS driver can't cope with an odd length, so handle the last byte - * specially if byte_count is odd. We don't expect this to be common. - */ - - spec.length = byte_count & (~ 1L); - spec.src_handle = info->handle.xms_handle; - spec.src.offset = file_offset; - spec.dst_handle = 0; - spec.dst.ptr = buffer_address; - - ctx.ds_si = (void far *) & spec; - ctx.ax = 0x0b00; /* EMB move */ - jxms_calldriver(xms_driver, (XMScontext far *) & ctx); - if (ctx.ax != 1) - ERREXIT(cinfo, JERR_XMS_READ); - - if (ODD(byte_count)) { - read_xms_store(cinfo, info, (void FAR *) endbuffer, - file_offset + byte_count - 1L, 2L); - ((char FAR *) buffer_address)[byte_count - 1L] = endbuffer[0]; - } -} - - -METHODDEF(void) -write_xms_store (j_common_ptr cinfo, backing_store_ptr info, - void FAR * buffer_address, - long file_offset, long byte_count) -{ - XMScontext ctx; - XMSspec spec; - char endbuffer[2]; - - /* The XMS driver can't cope with an odd length, so handle the last byte - * specially if byte_count is odd. We don't expect this to be common. - */ - - spec.length = byte_count & (~ 1L); - spec.src_handle = 0; - spec.src.ptr = buffer_address; - spec.dst_handle = info->handle.xms_handle; - spec.dst.offset = file_offset; - - ctx.ds_si = (void far *) & spec; - ctx.ax = 0x0b00; /* EMB move */ - jxms_calldriver(xms_driver, (XMScontext far *) & ctx); - if (ctx.ax != 1) - ERREXIT(cinfo, JERR_XMS_WRITE); - - if (ODD(byte_count)) { - read_xms_store(cinfo, info, (void FAR *) endbuffer, - file_offset + byte_count - 1L, 2L); - endbuffer[0] = ((char FAR *) buffer_address)[byte_count - 1L]; - write_xms_store(cinfo, info, (void FAR *) endbuffer, - file_offset + byte_count - 1L, 2L); - } -} - - -METHODDEF(void) -close_xms_store (j_common_ptr cinfo, backing_store_ptr info) -{ - XMScontext ctx; - - ctx.dx = info->handle.xms_handle; - ctx.ax = 0x0a00; - jxms_calldriver(xms_driver, (XMScontext far *) & ctx); - TRACEMS1(cinfo, 1, JTRC_XMS_CLOSE, info->handle.xms_handle); - /* we ignore any error return from the driver */ -} - - -LOCAL(boolean) -open_xms_store (j_common_ptr cinfo, backing_store_ptr info, - long total_bytes_needed) -{ - XMScontext ctx; - - /* Get address of XMS driver */ - jxms_getdriver((XMSDRIVER far *) & xms_driver); - if (xms_driver == NULL) - return FALSE; /* no driver to be had */ - - /* Get version number, must be >= 2.00 */ - ctx.ax = 0x0000; - jxms_calldriver(xms_driver, (XMScontext far *) & ctx); - if (ctx.ax < (unsigned short) 0x0200) - return FALSE; - - /* Try to get space (expressed in kilobytes) */ - ctx.dx = (unsigned short) ((total_bytes_needed + 1023L) >> 10); - ctx.ax = 0x0900; - jxms_calldriver(xms_driver, (XMScontext far *) & ctx); - if (ctx.ax != 1) - return FALSE; - - /* Succeeded, save the handle and away we go */ - info->handle.xms_handle = ctx.dx; - info->read_backing_store = read_xms_store; - info->write_backing_store = write_xms_store; - info->close_backing_store = close_xms_store; - TRACEMS1(cinfo, 1, JTRC_XMS_OPEN, ctx.dx); - return TRUE; /* succeeded */ -} - -#endif /* XMS_SUPPORTED */ - - -/* - * Access methods for expanded memory. - */ - -#if EMS_SUPPORTED - -/* The EMS move specification structure requires word and long fields aligned - * at odd byte boundaries. Some compilers will align struct fields at even - * byte boundaries. While it's usually possible to force byte alignment, - * that causes an overall performance penalty and may pose problems in merging - * JPEG into a larger application. Instead we accept some rather dirty code - * here. Note this code would fail if the hardware did not allow odd-byte - * word & long accesses, but all 80x86 CPUs do. - */ - -typedef void far * EMSPTR; - -typedef union { /* EMS move specification structure */ - long length; /* It's easy to access first 4 bytes */ - char bytes[18]; /* Misaligned fields in here! */ - } EMSspec; - -/* Macros for accessing misaligned fields */ -#define FIELD_AT(spec,offset,type) (*((type *) &(spec.bytes[offset]))) -#define SRC_TYPE(spec) FIELD_AT(spec,4,char) -#define SRC_HANDLE(spec) FIELD_AT(spec,5,EMSH) -#define SRC_OFFSET(spec) FIELD_AT(spec,7,unsigned short) -#define SRC_PAGE(spec) FIELD_AT(spec,9,unsigned short) -#define SRC_PTR(spec) FIELD_AT(spec,7,EMSPTR) -#define DST_TYPE(spec) FIELD_AT(spec,11,char) -#define DST_HANDLE(spec) FIELD_AT(spec,12,EMSH) -#define DST_OFFSET(spec) FIELD_AT(spec,14,unsigned short) -#define DST_PAGE(spec) FIELD_AT(spec,16,unsigned short) -#define DST_PTR(spec) FIELD_AT(spec,14,EMSPTR) - -#define EMSPAGESIZE 16384L /* gospel, see the EMS specs */ - -#define HIBYTE(W) (((W) >> 8) & 0xFF) -#define LOBYTE(W) ((W) & 0xFF) - - -METHODDEF(void) -read_ems_store (j_common_ptr cinfo, backing_store_ptr info, - void FAR * buffer_address, - long file_offset, long byte_count) -{ - EMScontext ctx; - EMSspec spec; - - spec.length = byte_count; - SRC_TYPE(spec) = 1; - SRC_HANDLE(spec) = info->handle.ems_handle; - SRC_PAGE(spec) = (unsigned short) (file_offset / EMSPAGESIZE); - SRC_OFFSET(spec) = (unsigned short) (file_offset % EMSPAGESIZE); - DST_TYPE(spec) = 0; - DST_HANDLE(spec) = 0; - DST_PTR(spec) = buffer_address; - - ctx.ds_si = (void far *) & spec; - ctx.ax = 0x5700; /* move memory region */ - jems_calldriver((EMScontext far *) & ctx); - if (HIBYTE(ctx.ax) != 0) - ERREXIT(cinfo, JERR_EMS_READ); -} - - -METHODDEF(void) -write_ems_store (j_common_ptr cinfo, backing_store_ptr info, - void FAR * buffer_address, - long file_offset, long byte_count) -{ - EMScontext ctx; - EMSspec spec; - - spec.length = byte_count; - SRC_TYPE(spec) = 0; - SRC_HANDLE(spec) = 0; - SRC_PTR(spec) = buffer_address; - DST_TYPE(spec) = 1; - DST_HANDLE(spec) = info->handle.ems_handle; - DST_PAGE(spec) = (unsigned short) (file_offset / EMSPAGESIZE); - DST_OFFSET(spec) = (unsigned short) (file_offset % EMSPAGESIZE); - - ctx.ds_si = (void far *) & spec; - ctx.ax = 0x5700; /* move memory region */ - jems_calldriver((EMScontext far *) & ctx); - if (HIBYTE(ctx.ax) != 0) - ERREXIT(cinfo, JERR_EMS_WRITE); -} - - -METHODDEF(void) -close_ems_store (j_common_ptr cinfo, backing_store_ptr info) -{ - EMScontext ctx; - - ctx.ax = 0x4500; - ctx.dx = info->handle.ems_handle; - jems_calldriver((EMScontext far *) & ctx); - TRACEMS1(cinfo, 1, JTRC_EMS_CLOSE, info->handle.ems_handle); - /* we ignore any error return from the driver */ -} - - -LOCAL(boolean) -open_ems_store (j_common_ptr cinfo, backing_store_ptr info, - long total_bytes_needed) -{ - EMScontext ctx; - - /* Is EMS driver there? */ - if (! jems_available()) - return FALSE; - - /* Get status, make sure EMS is OK */ - ctx.ax = 0x4000; - jems_calldriver((EMScontext far *) & ctx); - if (HIBYTE(ctx.ax) != 0) - return FALSE; - - /* Get version, must be >= 4.0 */ - ctx.ax = 0x4600; - jems_calldriver((EMScontext far *) & ctx); - if (HIBYTE(ctx.ax) != 0 || LOBYTE(ctx.ax) < 0x40) - return FALSE; - - /* Try to allocate requested space */ - ctx.ax = 0x4300; - ctx.bx = (unsigned short) ((total_bytes_needed + EMSPAGESIZE-1L) / EMSPAGESIZE); - jems_calldriver((EMScontext far *) & ctx); - if (HIBYTE(ctx.ax) != 0) - return FALSE; - - /* Succeeded, save the handle and away we go */ - info->handle.ems_handle = ctx.dx; - info->read_backing_store = read_ems_store; - info->write_backing_store = write_ems_store; - info->close_backing_store = close_ems_store; - TRACEMS1(cinfo, 1, JTRC_EMS_OPEN, ctx.dx); - return TRUE; /* succeeded */ -} - -#endif /* EMS_SUPPORTED */ - - -/* - * Initial opening of a backing-store object. - */ - -GLOBAL(void) -jpeg_open_backing_store (j_common_ptr cinfo, backing_store_ptr info, - long total_bytes_needed) -{ - /* Try extended memory, then expanded memory, then regular file. */ -#if XMS_SUPPORTED - if (open_xms_store(cinfo, info, total_bytes_needed)) - return; -#endif -#if EMS_SUPPORTED - if (open_ems_store(cinfo, info, total_bytes_needed)) - return; -#endif - if (open_file_store(cinfo, info, total_bytes_needed)) - return; - ERREXITS(cinfo, JERR_TFILE_CREATE, ""); -} - - -/* - * These routines take care of any system-dependent initialization and - * cleanup required. - */ - -GLOBAL(long) -jpeg_mem_init (j_common_ptr cinfo) -{ - next_file_num = 0; /* initialize temp file name generator */ - return DEFAULT_MAX_MEM; /* default for max_memory_to_use */ -} - -GLOBAL(void) -jpeg_mem_term (j_common_ptr cinfo) -{ - /* Microsoft C, at least in v6.00A, will not successfully reclaim freed - * blocks of size > 32Kbytes unless we give it a kick in the rear, like so: - */ -#ifdef NEED_FHEAPMIN - _fheapmin(); -#endif -} diff --git a/jpeg/jmemdosa.asm b/jpeg/jmemdosa.asm deleted file mode 100755 index ecd4372..0000000 --- a/jpeg/jmemdosa.asm +++ /dev/null @@ -1,379 +0,0 @@ -; -; jmemdosa.asm -; -; Copyright (C) 1992, Thomas G. Lane. -; This file is part of the Independent JPEG Group's software. -; For conditions of distribution and use, see the accompanying README file. -; -; This file contains low-level interface routines to support the MS-DOS -; backing store manager (jmemdos.c). Routines are provided to access disk -; files through direct DOS calls, and to access XMS and EMS drivers. -; -; This file should assemble with Microsoft's MASM or any compatible -; assembler (including Borland's Turbo Assembler). If you haven't got -; a compatible assembler, better fall back to jmemansi.c or jmemname.c. -; -; To minimize dependence on the C compiler's register usage conventions, -; we save and restore all 8086 registers, even though most compilers only -; require SI,DI,DS to be preserved. Also, we use only 16-bit-wide return -; values, which everybody returns in AX. -; -; Based on code contributed by Ge' Weijers. -; - -JMEMDOSA_TXT segment byte public 'CODE' - - assume cs:JMEMDOSA_TXT - - public _jdos_open - public _jdos_close - public _jdos_seek - public _jdos_read - public _jdos_write - public _jxms_getdriver - public _jxms_calldriver - public _jems_available - public _jems_calldriver - -; -; short far jdos_open (short far * handle, char far * filename) -; -; Create and open a temporary file -; -_jdos_open proc far - push bp ; linkage - mov bp,sp - push si ; save all registers for safety - push di - push bx - push cx - push dx - push es - push ds - mov cx,0 ; normal file attributes - lds dx,dword ptr [bp+10] ; get filename pointer - mov ah,3ch ; create file - int 21h - jc open_err ; if failed, return error code - lds bx,dword ptr [bp+6] ; get handle pointer - mov word ptr [bx],ax ; save the handle - xor ax,ax ; return zero for OK -open_err: pop ds ; restore registers and exit - pop es - pop dx - pop cx - pop bx - pop di - pop si - pop bp - ret -_jdos_open endp - - -; -; short far jdos_close (short handle) -; -; Close the file handle -; -_jdos_close proc far - push bp ; linkage - mov bp,sp - push si ; save all registers for safety - push di - push bx - push cx - push dx - push es - push ds - mov bx,word ptr [bp+6] ; file handle - mov ah,3eh ; close file - int 21h - jc close_err ; if failed, return error code - xor ax,ax ; return zero for OK -close_err: pop ds ; restore registers and exit - pop es - pop dx - pop cx - pop bx - pop di - pop si - pop bp - ret -_jdos_close endp - - -; -; short far jdos_seek (short handle, long offset) -; -; Set file position -; -_jdos_seek proc far - push bp ; linkage - mov bp,sp - push si ; save all registers for safety - push di - push bx - push cx - push dx - push es - push ds - mov bx,word ptr [bp+6] ; file handle - mov dx,word ptr [bp+8] ; LS offset - mov cx,word ptr [bp+10] ; MS offset - mov ax,4200h ; absolute seek - int 21h - jc seek_err ; if failed, return error code - xor ax,ax ; return zero for OK -seek_err: pop ds ; restore registers and exit - pop es - pop dx - pop cx - pop bx - pop di - pop si - pop bp - ret -_jdos_seek endp - - -; -; short far jdos_read (short handle, void far * buffer, unsigned short count) -; -; Read from file -; -_jdos_read proc far - push bp ; linkage - mov bp,sp - push si ; save all registers for safety - push di - push bx - push cx - push dx - push es - push ds - mov bx,word ptr [bp+6] ; file handle - lds dx,dword ptr [bp+8] ; buffer address - mov cx,word ptr [bp+12] ; number of bytes - mov ah,3fh ; read file - int 21h - jc read_err ; if failed, return error code - cmp ax,word ptr [bp+12] ; make sure all bytes were read - je read_ok - mov ax,1 ; else return 1 for not OK - jmp short read_err -read_ok: xor ax,ax ; return zero for OK -read_err: pop ds ; restore registers and exit - pop es - pop dx - pop cx - pop bx - pop di - pop si - pop bp - ret -_jdos_read endp - - -; -; short far jdos_write (short handle, void far * buffer, unsigned short count) -; -; Write to file -; -_jdos_write proc far - push bp ; linkage - mov bp,sp - push si ; save all registers for safety - push di - push bx - push cx - push dx - push es - push ds - mov bx,word ptr [bp+6] ; file handle - lds dx,dword ptr [bp+8] ; buffer address - mov cx,word ptr [bp+12] ; number of bytes - mov ah,40h ; write file - int 21h - jc write_err ; if failed, return error code - cmp ax,word ptr [bp+12] ; make sure all bytes written - je write_ok - mov ax,1 ; else return 1 for not OK - jmp short write_err -write_ok: xor ax,ax ; return zero for OK -write_err: pop ds ; restore registers and exit - pop es - pop dx - pop cx - pop bx - pop di - pop si - pop bp - ret -_jdos_write endp - - -; -; void far jxms_getdriver (XMSDRIVER far *) -; -; Get the address of the XMS driver, or NULL if not available -; -_jxms_getdriver proc far - push bp ; linkage - mov bp,sp - push si ; save all registers for safety - push di - push bx - push cx - push dx - push es - push ds - mov ax,4300h ; call multiplex interrupt with - int 2fh ; a magic cookie, hex 4300 - cmp al,80h ; AL should contain hex 80 - je xmsavail - xor dx,dx ; no XMS driver available - xor ax,ax ; return a nil pointer - jmp short xmsavail_done -xmsavail: mov ax,4310h ; fetch driver address with - int 2fh ; another magic cookie - mov dx,es ; copy address to dx:ax - mov ax,bx -xmsavail_done: les bx,dword ptr [bp+6] ; get pointer to return value - mov word ptr es:[bx],ax - mov word ptr es:[bx+2],dx - pop ds ; restore registers and exit - pop es - pop dx - pop cx - pop bx - pop di - pop si - pop bp - ret -_jxms_getdriver endp - - -; -; void far jxms_calldriver (XMSDRIVER, XMScontext far *) -; -; The XMScontext structure contains values for the AX,DX,BX,SI,DS registers. -; These are loaded, the XMS call is performed, and the new values of the -; AX,DX,BX registers are written back to the context structure. -; -_jxms_calldriver proc far - push bp ; linkage - mov bp,sp - push si ; save all registers for safety - push di - push bx - push cx - push dx - push es - push ds - les bx,dword ptr [bp+10] ; get XMScontext pointer - mov ax,word ptr es:[bx] ; load registers - mov dx,word ptr es:[bx+2] - mov si,word ptr es:[bx+6] - mov ds,word ptr es:[bx+8] - mov bx,word ptr es:[bx+4] - call dword ptr [bp+6] ; call the driver - mov cx,bx ; save returned BX for a sec - les bx,dword ptr [bp+10] ; get XMScontext pointer - mov word ptr es:[bx],ax ; put back ax,dx,bx - mov word ptr es:[bx+2],dx - mov word ptr es:[bx+4],cx - pop ds ; restore registers and exit - pop es - pop dx - pop cx - pop bx - pop di - pop si - pop bp - ret -_jxms_calldriver endp - - -; -; short far jems_available (void) -; -; Have we got an EMS driver? (this comes straight from the EMS 4.0 specs) -; -_jems_available proc far - push si ; save all registers for safety - push di - push bx - push cx - push dx - push es - push ds - mov ax,3567h ; get interrupt vector 67h - int 21h - push cs - pop ds - mov di,000ah ; check offs 10 in returned seg - lea si,ASCII_device_name ; against literal string - mov cx,8 - cld - repe cmpsb - jne no_ems - mov ax,1 ; match, it's there - jmp short avail_done -no_ems: xor ax,ax ; it's not there -avail_done: pop ds ; restore registers and exit - pop es - pop dx - pop cx - pop bx - pop di - pop si - ret - -ASCII_device_name db "EMMXXXX0" - -_jems_available endp - - -; -; void far jems_calldriver (EMScontext far *) -; -; The EMScontext structure contains values for the AX,DX,BX,SI,DS registers. -; These are loaded, the EMS trap is performed, and the new values of the -; AX,DX,BX registers are written back to the context structure. -; -_jems_calldriver proc far - push bp ; linkage - mov bp,sp - push si ; save all registers for safety - push di - push bx - push cx - push dx - push es - push ds - les bx,dword ptr [bp+6] ; get EMScontext pointer - mov ax,word ptr es:[bx] ; load registers - mov dx,word ptr es:[bx+2] - mov si,word ptr es:[bx+6] - mov ds,word ptr es:[bx+8] - mov bx,word ptr es:[bx+4] - int 67h ; call the EMS driver - mov cx,bx ; save returned BX for a sec - les bx,dword ptr [bp+6] ; get EMScontext pointer - mov word ptr es:[bx],ax ; put back ax,dx,bx - mov word ptr es:[bx+2],dx - mov word ptr es:[bx+4],cx - pop ds ; restore registers and exit - pop es - pop dx - pop cx - pop bx - pop di - pop si - pop bp - ret -_jems_calldriver endp - -JMEMDOSA_TXT ends - - end diff --git a/jpeg/jmemmac.c b/jpeg/jmemmac.c deleted file mode 100755 index 106f9be..0000000 --- a/jpeg/jmemmac.c +++ /dev/null @@ -1,289 +0,0 @@ -/* - * jmemmac.c - * - * Copyright (C) 1992-1997, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * jmemmac.c provides an Apple Macintosh implementation of the system- - * dependent portion of the JPEG memory manager. - * - * If you use jmemmac.c, then you must define USE_MAC_MEMMGR in the - * JPEG_INTERNALS part of jconfig.h. - * - * jmemmac.c uses the Macintosh toolbox routines NewPtr and DisposePtr - * instead of malloc and free. It accurately determines the amount of - * memory available by using CompactMem. Notice that if left to its - * own devices, this code can chew up all available space in the - * application's zone, with the exception of the rather small "slop" - * factor computed in jpeg_mem_available(). The application can ensure - * that more space is left over by reducing max_memory_to_use. - * - * Large images are swapped to disk using temporary files and System 7.0+'s - * temporary folder functionality. - * - * Note that jmemmac.c depends on two features of MacOS that were first - * introduced in System 7: FindFolder and the FSSpec-based calls. - * If your application uses jmemmac.c and is run under System 6 or earlier, - * and the jpeg library decides it needs a temporary file, it will abort, - * printing error messages about requiring System 7. (If no temporary files - * are created, it will run fine.) - * - * If you want to use jmemmac.c in an application that might be used with - * System 6 or earlier, then you should remove dependencies on FindFolder - * and the FSSpec calls. You will need to replace FindFolder with some - * other mechanism for finding a place to put temporary files, and you - * should replace the FSSpec calls with their HFS equivalents: - * - * FSpDelete -> HDelete - * FSpGetFInfo -> HGetFInfo - * FSpCreate -> HCreate - * FSpOpenDF -> HOpen *** Note: not HOpenDF *** - * FSMakeFSSpec -> (fill in spec by hand.) - * - * (Use HOpen instead of HOpenDF. HOpen is just a glue-interface to PBHOpen, - * which is on all HFS macs. HOpenDF is a System 7 addition which avoids the - * ages-old problem of names starting with a period.) - * - * Contributed by Sam Bushell (jsam@iagu.on.net) and - * Dan Gildor (gyld@in-touch.com). - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" -#include "jmemsys.h" /* import the system-dependent declarations */ - -#ifndef USE_MAC_MEMMGR /* make sure user got configuration right */ - You forgot to define USE_MAC_MEMMGR in jconfig.h. /* deliberate syntax error */ -#endif - -#include /* we use the MacOS memory manager */ -#include /* we use the MacOS File stuff */ -#include /* we use the MacOS HFS stuff */ -#include /* for smSystemScript */ -#include /* we use Gestalt to test for specific functionality */ - -#ifndef TEMP_FILE_NAME /* can override from jconfig.h or Makefile */ -#define TEMP_FILE_NAME "JPG%03d.TMP" -#endif - -static int next_file_num; /* to distinguish among several temp files */ - - -/* - * Memory allocation and freeing are controlled by the MacOS library - * routines NewPtr() and DisposePtr(), which allocate fixed-address - * storage. Unfortunately, the IJG library isn't smart enough to cope - * with relocatable storage. - */ - -GLOBAL(void *) -jpeg_get_small (j_common_ptr cinfo, size_t sizeofobject) -{ - return (void *) NewPtr(sizeofobject); -} - -GLOBAL(void) -jpeg_free_small (j_common_ptr cinfo, void * object, size_t sizeofobject) -{ - DisposePtr((Ptr) object); -} - - -/* - * "Large" objects are treated the same as "small" ones. - * NB: we include FAR keywords in the routine declarations simply for - * consistency with the rest of the IJG code; FAR should expand to empty - * on rational architectures like the Mac. - */ - -GLOBAL(void FAR *) -jpeg_get_large (j_common_ptr cinfo, size_t sizeofobject) -{ - return (void FAR *) NewPtr(sizeofobject); -} - -GLOBAL(void) -jpeg_free_large (j_common_ptr cinfo, void FAR * object, size_t sizeofobject) -{ - DisposePtr((Ptr) object); -} - - -/* - * This routine computes the total memory space available for allocation. - */ - -GLOBAL(long) -jpeg_mem_available (j_common_ptr cinfo, long min_bytes_needed, - long max_bytes_needed, long already_allocated) -{ - long limit = cinfo->mem->max_memory_to_use - already_allocated; - long slop, mem; - - /* Don't ask for more than what application has told us we may use */ - if (max_bytes_needed > limit && limit > 0) - max_bytes_needed = limit; - /* Find whether there's a big enough free block in the heap. - * CompactMem tries to create a contiguous block of the requested size, - * and then returns the size of the largest free block (which could be - * much more or much less than we asked for). - * We add some slop to ensure we don't use up all available memory. - */ - slop = max_bytes_needed / 16 + 32768L; - mem = CompactMem(max_bytes_needed + slop) - slop; - if (mem < 0) - mem = 0; /* sigh, couldn't even get the slop */ - /* Don't take more than the application says we can have */ - if (mem > limit && limit > 0) - mem = limit; - return mem; -} - - -/* - * Backing store (temporary file) management. - * Backing store objects are only used when the value returned by - * jpeg_mem_available is less than the total space needed. You can dispense - * with these routines if you have plenty of virtual memory; see jmemnobs.c. - */ - - -METHODDEF(void) -read_backing_store (j_common_ptr cinfo, backing_store_ptr info, - void FAR * buffer_address, - long file_offset, long byte_count) -{ - long bytes = byte_count; - long retVal; - - if ( SetFPos ( info->temp_file, fsFromStart, file_offset ) != noErr ) - ERREXIT(cinfo, JERR_TFILE_SEEK); - - retVal = FSRead ( info->temp_file, &bytes, - (unsigned char *) buffer_address ); - if ( retVal != noErr || bytes != byte_count ) - ERREXIT(cinfo, JERR_TFILE_READ); -} - - -METHODDEF(void) -write_backing_store (j_common_ptr cinfo, backing_store_ptr info, - void FAR * buffer_address, - long file_offset, long byte_count) -{ - long bytes = byte_count; - long retVal; - - if ( SetFPos ( info->temp_file, fsFromStart, file_offset ) != noErr ) - ERREXIT(cinfo, JERR_TFILE_SEEK); - - retVal = FSWrite ( info->temp_file, &bytes, - (unsigned char *) buffer_address ); - if ( retVal != noErr || bytes != byte_count ) - ERREXIT(cinfo, JERR_TFILE_WRITE); -} - - -METHODDEF(void) -close_backing_store (j_common_ptr cinfo, backing_store_ptr info) -{ - FSClose ( info->temp_file ); - FSpDelete ( &(info->tempSpec) ); -} - - -/* - * Initial opening of a backing-store object. - * - * This version uses FindFolder to find the Temporary Items folder, - * and puts the temporary file in there. - */ - -GLOBAL(void) -jpeg_open_backing_store (j_common_ptr cinfo, backing_store_ptr info, - long total_bytes_needed) -{ - short tmpRef, vRefNum; - long dirID; - FInfo finderInfo; - FSSpec theSpec; - Str255 fName; - OSErr osErr; - long gestaltResponse = 0; - - /* Check that FSSpec calls are available. */ - osErr = Gestalt( gestaltFSAttr, &gestaltResponse ); - if ( ( osErr != noErr ) - || !( gestaltResponse & (1<temp_name, TEMP_FILE_NAME, next_file_num); - strcpy ( (Ptr)fName+1, info->temp_name ); - *fName = strlen (info->temp_name); - osErr = FSMakeFSSpec ( vRefNum, dirID, fName, &theSpec ); - - if ( (osErr = FSpGetFInfo ( &theSpec, &finderInfo ) ) != noErr ) - break; - } - - osErr = FSpCreate ( &theSpec, '????', '????', smSystemScript ); - if ( osErr != noErr ) - ERREXITS(cinfo, JERR_TFILE_CREATE, info->temp_name); - - osErr = FSpOpenDF ( &theSpec, fsRdWrPerm, &(info->temp_file) ); - if ( osErr != noErr ) - ERREXITS(cinfo, JERR_TFILE_CREATE, info->temp_name); - - info->tempSpec = theSpec; - - info->read_backing_store = read_backing_store; - info->write_backing_store = write_backing_store; - info->close_backing_store = close_backing_store; - TRACEMSS(cinfo, 1, JTRC_TFILE_OPEN, info->temp_name); -} - - -/* - * These routines take care of any system-dependent initialization and - * cleanup required. - */ - -GLOBAL(long) -jpeg_mem_init (j_common_ptr cinfo) -{ - next_file_num = 0; - - /* max_memory_to_use will be initialized to FreeMem()'s result; - * the calling application might later reduce it, for example - * to leave room to invoke multiple JPEG objects. - * Note that FreeMem returns the total number of free bytes; - * it may not be possible to allocate a single block of this size. - */ - return FreeMem(); -} - -GLOBAL(void) -jpeg_mem_term (j_common_ptr cinfo) -{ - /* no work */ -} diff --git a/jpeg/jmemmgr.c b/jpeg/jmemmgr.c deleted file mode 100755 index f0e83fb..0000000 --- a/jpeg/jmemmgr.c +++ /dev/null @@ -1,1119 +0,0 @@ -/* - * jmemmgr.c - * - * Copyright (C) 1991-1997, Thomas G. Lane. - * Modified 2011 by Guido Vollbeding. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains the JPEG system-independent memory management - * routines. This code is usable across a wide variety of machines; most - * of the system dependencies have been isolated in a separate file. - * The major functions provided here are: - * * pool-based allocation and freeing of memory; - * * policy decisions about how to divide available memory among the - * virtual arrays; - * * control logic for swapping virtual arrays between main memory and - * backing storage. - * The separate system-dependent file provides the actual backing-storage - * access code, and it contains the policy decision about how much total - * main memory to use. - * This file is system-dependent in the sense that some of its functions - * are unnecessary in some systems. For example, if there is enough virtual - * memory so that backing storage will never be used, much of the virtual - * array control logic could be removed. (Of course, if you have that much - * memory then you shouldn't care about a little bit of unused code...) - */ - -#define JPEG_INTERNALS -#define AM_MEMORY_MANAGER /* we define jvirt_Xarray_control structs */ -#include "jinclude.h" -#include "jpeglib.h" -#include "jmemsys.h" /* import the system-dependent declarations */ - -#ifndef NO_GETENV -#ifndef HAVE_STDLIB_H /* should declare getenv() */ -extern char * getenv JPP((const char * name)); -#endif -#endif - - -/* - * Some important notes: - * The allocation routines provided here must never return NULL. - * They should exit to error_exit if unsuccessful. - * - * It's not a good idea to try to merge the sarray and barray routines, - * even though they are textually almost the same, because samples are - * usually stored as bytes while coefficients are shorts or ints. Thus, - * in machines where byte pointers have a different representation from - * word pointers, the resulting machine code could not be the same. - */ - - -/* - * Many machines require storage alignment: longs must start on 4-byte - * boundaries, doubles on 8-byte boundaries, etc. On such machines, malloc() - * always returns pointers that are multiples of the worst-case alignment - * requirement, and we had better do so too. - * There isn't any really portable way to determine the worst-case alignment - * requirement. This module assumes that the alignment requirement is - * multiples of sizeof(ALIGN_TYPE). - * By default, we define ALIGN_TYPE as double. This is necessary on some - * workstations (where doubles really do need 8-byte alignment) and will work - * fine on nearly everything. If your machine has lesser alignment needs, - * you can save a few bytes by making ALIGN_TYPE smaller. - * The only place I know of where this will NOT work is certain Macintosh - * 680x0 compilers that define double as a 10-byte IEEE extended float. - * Doing 10-byte alignment is counterproductive because longwords won't be - * aligned well. Put "#define ALIGN_TYPE long" in jconfig.h if you have - * such a compiler. - */ - -#ifndef ALIGN_TYPE /* so can override from jconfig.h */ -#define ALIGN_TYPE double -#endif - - -/* - * We allocate objects from "pools", where each pool is gotten with a single - * request to jpeg_get_small() or jpeg_get_large(). There is no per-object - * overhead within a pool, except for alignment padding. Each pool has a - * header with a link to the next pool of the same class. - * Small and large pool headers are identical except that the latter's - * link pointer must be FAR on 80x86 machines. - * Notice that the "real" header fields are union'ed with a dummy ALIGN_TYPE - * field. This forces the compiler to make SIZEOF(small_pool_hdr) a multiple - * of the alignment requirement of ALIGN_TYPE. - */ - -typedef union small_pool_struct * small_pool_ptr; - -typedef union small_pool_struct { - struct { - small_pool_ptr next; /* next in list of pools */ - size_t bytes_used; /* how many bytes already used within pool */ - size_t bytes_left; /* bytes still available in this pool */ - } hdr; - ALIGN_TYPE dummy; /* included in union to ensure alignment */ -} small_pool_hdr; - -typedef union large_pool_struct FAR * large_pool_ptr; - -typedef union large_pool_struct { - struct { - large_pool_ptr next; /* next in list of pools */ - size_t bytes_used; /* how many bytes already used within pool */ - size_t bytes_left; /* bytes still available in this pool */ - } hdr; - ALIGN_TYPE dummy; /* included in union to ensure alignment */ -} large_pool_hdr; - - -/* - * Here is the full definition of a memory manager object. - */ - -typedef struct { - struct jpeg_memory_mgr pub; /* public fields */ - - /* Each pool identifier (lifetime class) names a linked list of pools. */ - small_pool_ptr small_list[JPOOL_NUMPOOLS]; - large_pool_ptr large_list[JPOOL_NUMPOOLS]; - - /* Since we only have one lifetime class of virtual arrays, only one - * linked list is necessary (for each datatype). Note that the virtual - * array control blocks being linked together are actually stored somewhere - * in the small-pool list. - */ - jvirt_sarray_ptr virt_sarray_list; - jvirt_barray_ptr virt_barray_list; - - /* This counts total space obtained from jpeg_get_small/large */ - long total_space_allocated; - - /* alloc_sarray and alloc_barray set this value for use by virtual - * array routines. - */ - JDIMENSION last_rowsperchunk; /* from most recent alloc_sarray/barray */ -} my_memory_mgr; - -typedef my_memory_mgr * my_mem_ptr; - - -/* - * The control blocks for virtual arrays. - * Note that these blocks are allocated in the "small" pool area. - * System-dependent info for the associated backing store (if any) is hidden - * inside the backing_store_info struct. - */ - -struct jvirt_sarray_control { - JSAMPARRAY mem_buffer; /* => the in-memory buffer */ - JDIMENSION rows_in_array; /* total virtual array height */ - JDIMENSION samplesperrow; /* width of array (and of memory buffer) */ - JDIMENSION maxaccess; /* max rows accessed by access_virt_sarray */ - JDIMENSION rows_in_mem; /* height of memory buffer */ - JDIMENSION rowsperchunk; /* allocation chunk size in mem_buffer */ - JDIMENSION cur_start_row; /* first logical row # in the buffer */ - JDIMENSION first_undef_row; /* row # of first uninitialized row */ - boolean pre_zero; /* pre-zero mode requested? */ - boolean dirty; /* do current buffer contents need written? */ - boolean b_s_open; /* is backing-store data valid? */ - jvirt_sarray_ptr next; /* link to next virtual sarray control block */ - backing_store_info b_s_info; /* System-dependent control info */ -}; - -struct jvirt_barray_control { - JBLOCKARRAY mem_buffer; /* => the in-memory buffer */ - JDIMENSION rows_in_array; /* total virtual array height */ - JDIMENSION blocksperrow; /* width of array (and of memory buffer) */ - JDIMENSION maxaccess; /* max rows accessed by access_virt_barray */ - JDIMENSION rows_in_mem; /* height of memory buffer */ - JDIMENSION rowsperchunk; /* allocation chunk size in mem_buffer */ - JDIMENSION cur_start_row; /* first logical row # in the buffer */ - JDIMENSION first_undef_row; /* row # of first uninitialized row */ - boolean pre_zero; /* pre-zero mode requested? */ - boolean dirty; /* do current buffer contents need written? */ - boolean b_s_open; /* is backing-store data valid? */ - jvirt_barray_ptr next; /* link to next virtual barray control block */ - backing_store_info b_s_info; /* System-dependent control info */ -}; - - -#ifdef MEM_STATS /* optional extra stuff for statistics */ - -LOCAL(void) -print_mem_stats (j_common_ptr cinfo, int pool_id) -{ - my_mem_ptr mem = (my_mem_ptr) cinfo->mem; - small_pool_ptr shdr_ptr; - large_pool_ptr lhdr_ptr; - - /* Since this is only a debugging stub, we can cheat a little by using - * fprintf directly rather than going through the trace message code. - * This is helpful because message parm array can't handle longs. - */ - fprintf(stderr, "Freeing pool %d, total space = %ld\n", - pool_id, mem->total_space_allocated); - - for (lhdr_ptr = mem->large_list[pool_id]; lhdr_ptr != NULL; - lhdr_ptr = lhdr_ptr->hdr.next) { - fprintf(stderr, " Large chunk used %ld\n", - (long) lhdr_ptr->hdr.bytes_used); - } - - for (shdr_ptr = mem->small_list[pool_id]; shdr_ptr != NULL; - shdr_ptr = shdr_ptr->hdr.next) { - fprintf(stderr, " Small chunk used %ld free %ld\n", - (long) shdr_ptr->hdr.bytes_used, - (long) shdr_ptr->hdr.bytes_left); - } -} - -#endif /* MEM_STATS */ - - -LOCAL(void) -out_of_memory (j_common_ptr cinfo, int which) -/* Report an out-of-memory error and stop execution */ -/* If we compiled MEM_STATS support, report alloc requests before dying */ -{ -#ifdef MEM_STATS - cinfo->err->trace_level = 2; /* force self_destruct to report stats */ -#endif - ERREXIT1(cinfo, JERR_OUT_OF_MEMORY, which); -} - - -/* - * Allocation of "small" objects. - * - * For these, we use pooled storage. When a new pool must be created, - * we try to get enough space for the current request plus a "slop" factor, - * where the slop will be the amount of leftover space in the new pool. - * The speed vs. space tradeoff is largely determined by the slop values. - * A different slop value is provided for each pool class (lifetime), - * and we also distinguish the first pool of a class from later ones. - * NOTE: the values given work fairly well on both 16- and 32-bit-int - * machines, but may be too small if longs are 64 bits or more. - */ - -static const size_t first_pool_slop[JPOOL_NUMPOOLS] = -{ - 1600, /* first PERMANENT pool */ - 16000 /* first IMAGE pool */ -}; - -static const size_t extra_pool_slop[JPOOL_NUMPOOLS] = -{ - 0, /* additional PERMANENT pools */ - 5000 /* additional IMAGE pools */ -}; - -#define MIN_SLOP 50 /* greater than 0 to avoid futile looping */ - - -METHODDEF(void *) -alloc_small (j_common_ptr cinfo, int pool_id, size_t sizeofobject) -/* Allocate a "small" object */ -{ - my_mem_ptr mem = (my_mem_ptr) cinfo->mem; - small_pool_ptr hdr_ptr, prev_hdr_ptr; - char * data_ptr; - size_t odd_bytes, min_request, slop; - - /* Check for unsatisfiable request (do now to ensure no overflow below) */ - if (sizeofobject > (size_t) (MAX_ALLOC_CHUNK-SIZEOF(small_pool_hdr))) - out_of_memory(cinfo, 1); /* request exceeds malloc's ability */ - - /* Round up the requested size to a multiple of SIZEOF(ALIGN_TYPE) */ - odd_bytes = sizeofobject % SIZEOF(ALIGN_TYPE); - if (odd_bytes > 0) - sizeofobject += SIZEOF(ALIGN_TYPE) - odd_bytes; - - /* See if space is available in any existing pool */ - if (pool_id < 0 || pool_id >= JPOOL_NUMPOOLS) - ERREXIT1(cinfo, JERR_BAD_POOL_ID, pool_id); /* safety check */ - prev_hdr_ptr = NULL; - hdr_ptr = mem->small_list[pool_id]; - while (hdr_ptr != NULL) { - if (hdr_ptr->hdr.bytes_left >= sizeofobject) - break; /* found pool with enough space */ - prev_hdr_ptr = hdr_ptr; - hdr_ptr = hdr_ptr->hdr.next; - } - - /* Time to make a new pool? */ - if (hdr_ptr == NULL) { - /* min_request is what we need now, slop is what will be leftover */ - min_request = sizeofobject + SIZEOF(small_pool_hdr); - if (prev_hdr_ptr == NULL) /* first pool in class? */ - slop = first_pool_slop[pool_id]; - else - slop = extra_pool_slop[pool_id]; - /* Don't ask for more than MAX_ALLOC_CHUNK */ - if (slop > (size_t) (MAX_ALLOC_CHUNK-min_request)) - slop = (size_t) (MAX_ALLOC_CHUNK-min_request); - /* Try to get space, if fail reduce slop and try again */ - for (;;) { - hdr_ptr = (small_pool_ptr) jpeg_get_small(cinfo, min_request + slop); - if (hdr_ptr != NULL) - break; - slop /= 2; - if (slop < MIN_SLOP) /* give up when it gets real small */ - out_of_memory(cinfo, 2); /* jpeg_get_small failed */ - } - mem->total_space_allocated += min_request + slop; - /* Success, initialize the new pool header and add to end of list */ - hdr_ptr->hdr.next = NULL; - hdr_ptr->hdr.bytes_used = 0; - hdr_ptr->hdr.bytes_left = sizeofobject + slop; - if (prev_hdr_ptr == NULL) /* first pool in class? */ - mem->small_list[pool_id] = hdr_ptr; - else - prev_hdr_ptr->hdr.next = hdr_ptr; - } - - /* OK, allocate the object from the current pool */ - data_ptr = (char *) (hdr_ptr + 1); /* point to first data byte in pool */ - data_ptr += hdr_ptr->hdr.bytes_used; /* point to place for object */ - hdr_ptr->hdr.bytes_used += sizeofobject; - hdr_ptr->hdr.bytes_left -= sizeofobject; - - return (void *) data_ptr; -} - - -/* - * Allocation of "large" objects. - * - * The external semantics of these are the same as "small" objects, - * except that FAR pointers are used on 80x86. However the pool - * management heuristics are quite different. We assume that each - * request is large enough that it may as well be passed directly to - * jpeg_get_large; the pool management just links everything together - * so that we can free it all on demand. - * Note: the major use of "large" objects is in JSAMPARRAY and JBLOCKARRAY - * structures. The routines that create these structures (see below) - * deliberately bunch rows together to ensure a large request size. - */ - -METHODDEF(void FAR *) -alloc_large (j_common_ptr cinfo, int pool_id, size_t sizeofobject) -/* Allocate a "large" object */ -{ - my_mem_ptr mem = (my_mem_ptr) cinfo->mem; - large_pool_ptr hdr_ptr; - size_t odd_bytes; - - /* Check for unsatisfiable request (do now to ensure no overflow below) */ - if (sizeofobject > (size_t) (MAX_ALLOC_CHUNK-SIZEOF(large_pool_hdr))) - out_of_memory(cinfo, 3); /* request exceeds malloc's ability */ - - /* Round up the requested size to a multiple of SIZEOF(ALIGN_TYPE) */ - odd_bytes = sizeofobject % SIZEOF(ALIGN_TYPE); - if (odd_bytes > 0) - sizeofobject += SIZEOF(ALIGN_TYPE) - odd_bytes; - - /* Always make a new pool */ - if (pool_id < 0 || pool_id >= JPOOL_NUMPOOLS) - ERREXIT1(cinfo, JERR_BAD_POOL_ID, pool_id); /* safety check */ - - hdr_ptr = (large_pool_ptr) jpeg_get_large(cinfo, sizeofobject + - SIZEOF(large_pool_hdr)); - if (hdr_ptr == NULL) - out_of_memory(cinfo, 4); /* jpeg_get_large failed */ - mem->total_space_allocated += sizeofobject + SIZEOF(large_pool_hdr); - - /* Success, initialize the new pool header and add to list */ - hdr_ptr->hdr.next = mem->large_list[pool_id]; - /* We maintain space counts in each pool header for statistical purposes, - * even though they are not needed for allocation. - */ - hdr_ptr->hdr.bytes_used = sizeofobject; - hdr_ptr->hdr.bytes_left = 0; - mem->large_list[pool_id] = hdr_ptr; - - return (void FAR *) (hdr_ptr + 1); /* point to first data byte in pool */ -} - - -/* - * Creation of 2-D sample arrays. - * The pointers are in near heap, the samples themselves in FAR heap. - * - * To minimize allocation overhead and to allow I/O of large contiguous - * blocks, we allocate the sample rows in groups of as many rows as possible - * without exceeding MAX_ALLOC_CHUNK total bytes per allocation request. - * NB: the virtual array control routines, later in this file, know about - * this chunking of rows. The rowsperchunk value is left in the mem manager - * object so that it can be saved away if this sarray is the workspace for - * a virtual array. - */ - -METHODDEF(JSAMPARRAY) -alloc_sarray (j_common_ptr cinfo, int pool_id, - JDIMENSION samplesperrow, JDIMENSION numrows) -/* Allocate a 2-D sample array */ -{ - my_mem_ptr mem = (my_mem_ptr) cinfo->mem; - JSAMPARRAY result; - JSAMPROW workspace; - JDIMENSION rowsperchunk, currow, i; - long ltemp; - - /* Calculate max # of rows allowed in one allocation chunk */ - ltemp = (MAX_ALLOC_CHUNK-SIZEOF(large_pool_hdr)) / - ((long) samplesperrow * SIZEOF(JSAMPLE)); - if (ltemp <= 0) - ERREXIT(cinfo, JERR_WIDTH_OVERFLOW); - if (ltemp < (long) numrows) - rowsperchunk = (JDIMENSION) ltemp; - else - rowsperchunk = numrows; - mem->last_rowsperchunk = rowsperchunk; - - /* Get space for row pointers (small object) */ - result = (JSAMPARRAY) alloc_small(cinfo, pool_id, - (size_t) (numrows * SIZEOF(JSAMPROW))); - - /* Get the rows themselves (large objects) */ - currow = 0; - while (currow < numrows) { - rowsperchunk = MIN(rowsperchunk, numrows - currow); - workspace = (JSAMPROW) alloc_large(cinfo, pool_id, - (size_t) ((size_t) rowsperchunk * (size_t) samplesperrow - * SIZEOF(JSAMPLE))); - for (i = rowsperchunk; i > 0; i--) { - result[currow++] = workspace; - workspace += samplesperrow; - } - } - - return result; -} - - -/* - * Creation of 2-D coefficient-block arrays. - * This is essentially the same as the code for sample arrays, above. - */ - -METHODDEF(JBLOCKARRAY) -alloc_barray (j_common_ptr cinfo, int pool_id, - JDIMENSION blocksperrow, JDIMENSION numrows) -/* Allocate a 2-D coefficient-block array */ -{ - my_mem_ptr mem = (my_mem_ptr) cinfo->mem; - JBLOCKARRAY result; - JBLOCKROW workspace; - JDIMENSION rowsperchunk, currow, i; - long ltemp; - - /* Calculate max # of rows allowed in one allocation chunk */ - ltemp = (MAX_ALLOC_CHUNK-SIZEOF(large_pool_hdr)) / - ((long) blocksperrow * SIZEOF(JBLOCK)); - if (ltemp <= 0) - ERREXIT(cinfo, JERR_WIDTH_OVERFLOW); - if (ltemp < (long) numrows) - rowsperchunk = (JDIMENSION) ltemp; - else - rowsperchunk = numrows; - mem->last_rowsperchunk = rowsperchunk; - - /* Get space for row pointers (small object) */ - result = (JBLOCKARRAY) alloc_small(cinfo, pool_id, - (size_t) (numrows * SIZEOF(JBLOCKROW))); - - /* Get the rows themselves (large objects) */ - currow = 0; - while (currow < numrows) { - rowsperchunk = MIN(rowsperchunk, numrows - currow); - workspace = (JBLOCKROW) alloc_large(cinfo, pool_id, - (size_t) ((size_t) rowsperchunk * (size_t) blocksperrow - * SIZEOF(JBLOCK))); - for (i = rowsperchunk; i > 0; i--) { - result[currow++] = workspace; - workspace += blocksperrow; - } - } - - return result; -} - - -/* - * About virtual array management: - * - * The above "normal" array routines are only used to allocate strip buffers - * (as wide as the image, but just a few rows high). Full-image-sized buffers - * are handled as "virtual" arrays. The array is still accessed a strip at a - * time, but the memory manager must save the whole array for repeated - * accesses. The intended implementation is that there is a strip buffer in - * memory (as high as is possible given the desired memory limit), plus a - * backing file that holds the rest of the array. - * - * The request_virt_array routines are told the total size of the image and - * the maximum number of rows that will be accessed at once. The in-memory - * buffer must be at least as large as the maxaccess value. - * - * The request routines create control blocks but not the in-memory buffers. - * That is postponed until realize_virt_arrays is called. At that time the - * total amount of space needed is known (approximately, anyway), so free - * memory can be divided up fairly. - * - * The access_virt_array routines are responsible for making a specific strip - * area accessible (after reading or writing the backing file, if necessary). - * Note that the access routines are told whether the caller intends to modify - * the accessed strip; during a read-only pass this saves having to rewrite - * data to disk. The access routines are also responsible for pre-zeroing - * any newly accessed rows, if pre-zeroing was requested. - * - * In current usage, the access requests are usually for nonoverlapping - * strips; that is, successive access start_row numbers differ by exactly - * num_rows = maxaccess. This means we can get good performance with simple - * buffer dump/reload logic, by making the in-memory buffer be a multiple - * of the access height; then there will never be accesses across bufferload - * boundaries. The code will still work with overlapping access requests, - * but it doesn't handle bufferload overlaps very efficiently. - */ - - -METHODDEF(jvirt_sarray_ptr) -request_virt_sarray (j_common_ptr cinfo, int pool_id, boolean pre_zero, - JDIMENSION samplesperrow, JDIMENSION numrows, - JDIMENSION maxaccess) -/* Request a virtual 2-D sample array */ -{ - my_mem_ptr mem = (my_mem_ptr) cinfo->mem; - jvirt_sarray_ptr result; - - /* Only IMAGE-lifetime virtual arrays are currently supported */ - if (pool_id != JPOOL_IMAGE) - ERREXIT1(cinfo, JERR_BAD_POOL_ID, pool_id); /* safety check */ - - /* get control block */ - result = (jvirt_sarray_ptr) alloc_small(cinfo, pool_id, - SIZEOF(struct jvirt_sarray_control)); - - result->mem_buffer = NULL; /* marks array not yet realized */ - result->rows_in_array = numrows; - result->samplesperrow = samplesperrow; - result->maxaccess = maxaccess; - result->pre_zero = pre_zero; - result->b_s_open = FALSE; /* no associated backing-store object */ - result->next = mem->virt_sarray_list; /* add to list of virtual arrays */ - mem->virt_sarray_list = result; - - return result; -} - - -METHODDEF(jvirt_barray_ptr) -request_virt_barray (j_common_ptr cinfo, int pool_id, boolean pre_zero, - JDIMENSION blocksperrow, JDIMENSION numrows, - JDIMENSION maxaccess) -/* Request a virtual 2-D coefficient-block array */ -{ - my_mem_ptr mem = (my_mem_ptr) cinfo->mem; - jvirt_barray_ptr result; - - /* Only IMAGE-lifetime virtual arrays are currently supported */ - if (pool_id != JPOOL_IMAGE) - ERREXIT1(cinfo, JERR_BAD_POOL_ID, pool_id); /* safety check */ - - /* get control block */ - result = (jvirt_barray_ptr) alloc_small(cinfo, pool_id, - SIZEOF(struct jvirt_barray_control)); - - result->mem_buffer = NULL; /* marks array not yet realized */ - result->rows_in_array = numrows; - result->blocksperrow = blocksperrow; - result->maxaccess = maxaccess; - result->pre_zero = pre_zero; - result->b_s_open = FALSE; /* no associated backing-store object */ - result->next = mem->virt_barray_list; /* add to list of virtual arrays */ - mem->virt_barray_list = result; - - return result; -} - - -METHODDEF(void) -realize_virt_arrays (j_common_ptr cinfo) -/* Allocate the in-memory buffers for any unrealized virtual arrays */ -{ - my_mem_ptr mem = (my_mem_ptr) cinfo->mem; - long space_per_minheight, maximum_space, avail_mem; - long minheights, max_minheights; - jvirt_sarray_ptr sptr; - jvirt_barray_ptr bptr; - - /* Compute the minimum space needed (maxaccess rows in each buffer) - * and the maximum space needed (full image height in each buffer). - * These may be of use to the system-dependent jpeg_mem_available routine. - */ - space_per_minheight = 0; - maximum_space = 0; - for (sptr = mem->virt_sarray_list; sptr != NULL; sptr = sptr->next) { - if (sptr->mem_buffer == NULL) { /* if not realized yet */ - space_per_minheight += (long) sptr->maxaccess * - (long) sptr->samplesperrow * SIZEOF(JSAMPLE); - maximum_space += (long) sptr->rows_in_array * - (long) sptr->samplesperrow * SIZEOF(JSAMPLE); - } - } - for (bptr = mem->virt_barray_list; bptr != NULL; bptr = bptr->next) { - if (bptr->mem_buffer == NULL) { /* if not realized yet */ - space_per_minheight += (long) bptr->maxaccess * - (long) bptr->blocksperrow * SIZEOF(JBLOCK); - maximum_space += (long) bptr->rows_in_array * - (long) bptr->blocksperrow * SIZEOF(JBLOCK); - } - } - - if (space_per_minheight <= 0) - return; /* no unrealized arrays, no work */ - - /* Determine amount of memory to actually use; this is system-dependent. */ - avail_mem = jpeg_mem_available(cinfo, space_per_minheight, maximum_space, - mem->total_space_allocated); - - /* If the maximum space needed is available, make all the buffers full - * height; otherwise parcel it out with the same number of minheights - * in each buffer. - */ - if (avail_mem >= maximum_space) - max_minheights = 1000000000L; - else { - max_minheights = avail_mem / space_per_minheight; - /* If there doesn't seem to be enough space, try to get the minimum - * anyway. This allows a "stub" implementation of jpeg_mem_available(). - */ - if (max_minheights <= 0) - max_minheights = 1; - } - - /* Allocate the in-memory buffers and initialize backing store as needed. */ - - for (sptr = mem->virt_sarray_list; sptr != NULL; sptr = sptr->next) { - if (sptr->mem_buffer == NULL) { /* if not realized yet */ - minheights = ((long) sptr->rows_in_array - 1L) / sptr->maxaccess + 1L; - if (minheights <= max_minheights) { - /* This buffer fits in memory */ - sptr->rows_in_mem = sptr->rows_in_array; - } else { - /* It doesn't fit in memory, create backing store. */ - sptr->rows_in_mem = (JDIMENSION) (max_minheights * sptr->maxaccess); - jpeg_open_backing_store(cinfo, & sptr->b_s_info, - (long) sptr->rows_in_array * - (long) sptr->samplesperrow * - (long) SIZEOF(JSAMPLE)); - sptr->b_s_open = TRUE; - } - sptr->mem_buffer = alloc_sarray(cinfo, JPOOL_IMAGE, - sptr->samplesperrow, sptr->rows_in_mem); - sptr->rowsperchunk = mem->last_rowsperchunk; - sptr->cur_start_row = 0; - sptr->first_undef_row = 0; - sptr->dirty = FALSE; - } - } - - for (bptr = mem->virt_barray_list; bptr != NULL; bptr = bptr->next) { - if (bptr->mem_buffer == NULL) { /* if not realized yet */ - minheights = ((long) bptr->rows_in_array - 1L) / bptr->maxaccess + 1L; - if (minheights <= max_minheights) { - /* This buffer fits in memory */ - bptr->rows_in_mem = bptr->rows_in_array; - } else { - /* It doesn't fit in memory, create backing store. */ - bptr->rows_in_mem = (JDIMENSION) (max_minheights * bptr->maxaccess); - jpeg_open_backing_store(cinfo, & bptr->b_s_info, - (long) bptr->rows_in_array * - (long) bptr->blocksperrow * - (long) SIZEOF(JBLOCK)); - bptr->b_s_open = TRUE; - } - bptr->mem_buffer = alloc_barray(cinfo, JPOOL_IMAGE, - bptr->blocksperrow, bptr->rows_in_mem); - bptr->rowsperchunk = mem->last_rowsperchunk; - bptr->cur_start_row = 0; - bptr->first_undef_row = 0; - bptr->dirty = FALSE; - } - } -} - - -LOCAL(void) -do_sarray_io (j_common_ptr cinfo, jvirt_sarray_ptr ptr, boolean writing) -/* Do backing store read or write of a virtual sample array */ -{ - long bytesperrow, file_offset, byte_count, rows, thisrow, i; - - bytesperrow = (long) ptr->samplesperrow * SIZEOF(JSAMPLE); - file_offset = ptr->cur_start_row * bytesperrow; - /* Loop to read or write each allocation chunk in mem_buffer */ - for (i = 0; i < (long) ptr->rows_in_mem; i += ptr->rowsperchunk) { - /* One chunk, but check for short chunk at end of buffer */ - rows = MIN((long) ptr->rowsperchunk, (long) ptr->rows_in_mem - i); - /* Transfer no more than is currently defined */ - thisrow = (long) ptr->cur_start_row + i; - rows = MIN(rows, (long) ptr->first_undef_row - thisrow); - /* Transfer no more than fits in file */ - rows = MIN(rows, (long) ptr->rows_in_array - thisrow); - if (rows <= 0) /* this chunk might be past end of file! */ - break; - byte_count = rows * bytesperrow; - if (writing) - (*ptr->b_s_info.write_backing_store) (cinfo, & ptr->b_s_info, - (void FAR *) ptr->mem_buffer[i], - file_offset, byte_count); - else - (*ptr->b_s_info.read_backing_store) (cinfo, & ptr->b_s_info, - (void FAR *) ptr->mem_buffer[i], - file_offset, byte_count); - file_offset += byte_count; - } -} - - -LOCAL(void) -do_barray_io (j_common_ptr cinfo, jvirt_barray_ptr ptr, boolean writing) -/* Do backing store read or write of a virtual coefficient-block array */ -{ - long bytesperrow, file_offset, byte_count, rows, thisrow, i; - - bytesperrow = (long) ptr->blocksperrow * SIZEOF(JBLOCK); - file_offset = ptr->cur_start_row * bytesperrow; - /* Loop to read or write each allocation chunk in mem_buffer */ - for (i = 0; i < (long) ptr->rows_in_mem; i += ptr->rowsperchunk) { - /* One chunk, but check for short chunk at end of buffer */ - rows = MIN((long) ptr->rowsperchunk, (long) ptr->rows_in_mem - i); - /* Transfer no more than is currently defined */ - thisrow = (long) ptr->cur_start_row + i; - rows = MIN(rows, (long) ptr->first_undef_row - thisrow); - /* Transfer no more than fits in file */ - rows = MIN(rows, (long) ptr->rows_in_array - thisrow); - if (rows <= 0) /* this chunk might be past end of file! */ - break; - byte_count = rows * bytesperrow; - if (writing) - (*ptr->b_s_info.write_backing_store) (cinfo, & ptr->b_s_info, - (void FAR *) ptr->mem_buffer[i], - file_offset, byte_count); - else - (*ptr->b_s_info.read_backing_store) (cinfo, & ptr->b_s_info, - (void FAR *) ptr->mem_buffer[i], - file_offset, byte_count); - file_offset += byte_count; - } -} - - -METHODDEF(JSAMPARRAY) -access_virt_sarray (j_common_ptr cinfo, jvirt_sarray_ptr ptr, - JDIMENSION start_row, JDIMENSION num_rows, - boolean writable) -/* Access the part of a virtual sample array starting at start_row */ -/* and extending for num_rows rows. writable is true if */ -/* caller intends to modify the accessed area. */ -{ - JDIMENSION end_row = start_row + num_rows; - JDIMENSION undef_row; - - /* debugging check */ - if (end_row > ptr->rows_in_array || num_rows > ptr->maxaccess || - ptr->mem_buffer == NULL) - ERREXIT(cinfo, JERR_BAD_VIRTUAL_ACCESS); - - /* Make the desired part of the virtual array accessible */ - if (start_row < ptr->cur_start_row || - end_row > ptr->cur_start_row+ptr->rows_in_mem) { - if (! ptr->b_s_open) - ERREXIT(cinfo, JERR_VIRTUAL_BUG); - /* Flush old buffer contents if necessary */ - if (ptr->dirty) { - do_sarray_io(cinfo, ptr, TRUE); - ptr->dirty = FALSE; - } - /* Decide what part of virtual array to access. - * Algorithm: if target address > current window, assume forward scan, - * load starting at target address. If target address < current window, - * assume backward scan, load so that target area is top of window. - * Note that when switching from forward write to forward read, will have - * start_row = 0, so the limiting case applies and we load from 0 anyway. - */ - if (start_row > ptr->cur_start_row) { - ptr->cur_start_row = start_row; - } else { - /* use long arithmetic here to avoid overflow & unsigned problems */ - long ltemp; - - ltemp = (long) end_row - (long) ptr->rows_in_mem; - if (ltemp < 0) - ltemp = 0; /* don't fall off front end of file */ - ptr->cur_start_row = (JDIMENSION) ltemp; - } - /* Read in the selected part of the array. - * During the initial write pass, we will do no actual read - * because the selected part is all undefined. - */ - do_sarray_io(cinfo, ptr, FALSE); - } - /* Ensure the accessed part of the array is defined; prezero if needed. - * To improve locality of access, we only prezero the part of the array - * that the caller is about to access, not the entire in-memory array. - */ - if (ptr->first_undef_row < end_row) { - if (ptr->first_undef_row < start_row) { - if (writable) /* writer skipped over a section of array */ - ERREXIT(cinfo, JERR_BAD_VIRTUAL_ACCESS); - undef_row = start_row; /* but reader is allowed to read ahead */ - } else { - undef_row = ptr->first_undef_row; - } - if (writable) - ptr->first_undef_row = end_row; - if (ptr->pre_zero) { - size_t bytesperrow = (size_t) ptr->samplesperrow * SIZEOF(JSAMPLE); - undef_row -= ptr->cur_start_row; /* make indexes relative to buffer */ - end_row -= ptr->cur_start_row; - while (undef_row < end_row) { - FMEMZERO((void FAR *) ptr->mem_buffer[undef_row], bytesperrow); - undef_row++; - } - } else { - if (! writable) /* reader looking at undefined data */ - ERREXIT(cinfo, JERR_BAD_VIRTUAL_ACCESS); - } - } - /* Flag the buffer dirty if caller will write in it */ - if (writable) - ptr->dirty = TRUE; - /* Return address of proper part of the buffer */ - return ptr->mem_buffer + (start_row - ptr->cur_start_row); -} - - -METHODDEF(JBLOCKARRAY) -access_virt_barray (j_common_ptr cinfo, jvirt_barray_ptr ptr, - JDIMENSION start_row, JDIMENSION num_rows, - boolean writable) -/* Access the part of a virtual block array starting at start_row */ -/* and extending for num_rows rows. writable is true if */ -/* caller intends to modify the accessed area. */ -{ - JDIMENSION end_row = start_row + num_rows; - JDIMENSION undef_row; - - /* debugging check */ - if (end_row > ptr->rows_in_array || num_rows > ptr->maxaccess || - ptr->mem_buffer == NULL) - ERREXIT(cinfo, JERR_BAD_VIRTUAL_ACCESS); - - /* Make the desired part of the virtual array accessible */ - if (start_row < ptr->cur_start_row || - end_row > ptr->cur_start_row+ptr->rows_in_mem) { - if (! ptr->b_s_open) - ERREXIT(cinfo, JERR_VIRTUAL_BUG); - /* Flush old buffer contents if necessary */ - if (ptr->dirty) { - do_barray_io(cinfo, ptr, TRUE); - ptr->dirty = FALSE; - } - /* Decide what part of virtual array to access. - * Algorithm: if target address > current window, assume forward scan, - * load starting at target address. If target address < current window, - * assume backward scan, load so that target area is top of window. - * Note that when switching from forward write to forward read, will have - * start_row = 0, so the limiting case applies and we load from 0 anyway. - */ - if (start_row > ptr->cur_start_row) { - ptr->cur_start_row = start_row; - } else { - /* use long arithmetic here to avoid overflow & unsigned problems */ - long ltemp; - - ltemp = (long) end_row - (long) ptr->rows_in_mem; - if (ltemp < 0) - ltemp = 0; /* don't fall off front end of file */ - ptr->cur_start_row = (JDIMENSION) ltemp; - } - /* Read in the selected part of the array. - * During the initial write pass, we will do no actual read - * because the selected part is all undefined. - */ - do_barray_io(cinfo, ptr, FALSE); - } - /* Ensure the accessed part of the array is defined; prezero if needed. - * To improve locality of access, we only prezero the part of the array - * that the caller is about to access, not the entire in-memory array. - */ - if (ptr->first_undef_row < end_row) { - if (ptr->first_undef_row < start_row) { - if (writable) /* writer skipped over a section of array */ - ERREXIT(cinfo, JERR_BAD_VIRTUAL_ACCESS); - undef_row = start_row; /* but reader is allowed to read ahead */ - } else { - undef_row = ptr->first_undef_row; - } - if (writable) - ptr->first_undef_row = end_row; - if (ptr->pre_zero) { - size_t bytesperrow = (size_t) ptr->blocksperrow * SIZEOF(JBLOCK); - undef_row -= ptr->cur_start_row; /* make indexes relative to buffer */ - end_row -= ptr->cur_start_row; - while (undef_row < end_row) { - FMEMZERO((void FAR *) ptr->mem_buffer[undef_row], bytesperrow); - undef_row++; - } - } else { - if (! writable) /* reader looking at undefined data */ - ERREXIT(cinfo, JERR_BAD_VIRTUAL_ACCESS); - } - } - /* Flag the buffer dirty if caller will write in it */ - if (writable) - ptr->dirty = TRUE; - /* Return address of proper part of the buffer */ - return ptr->mem_buffer + (start_row - ptr->cur_start_row); -} - - -/* - * Release all objects belonging to a specified pool. - */ - -METHODDEF(void) -free_pool (j_common_ptr cinfo, int pool_id) -{ - my_mem_ptr mem = (my_mem_ptr) cinfo->mem; - small_pool_ptr shdr_ptr; - large_pool_ptr lhdr_ptr; - size_t space_freed; - - if (pool_id < 0 || pool_id >= JPOOL_NUMPOOLS) - ERREXIT1(cinfo, JERR_BAD_POOL_ID, pool_id); /* safety check */ - -#ifdef MEM_STATS - if (cinfo->err->trace_level > 1) - print_mem_stats(cinfo, pool_id); /* print pool's memory usage statistics */ -#endif - - /* If freeing IMAGE pool, close any virtual arrays first */ - if (pool_id == JPOOL_IMAGE) { - jvirt_sarray_ptr sptr; - jvirt_barray_ptr bptr; - - for (sptr = mem->virt_sarray_list; sptr != NULL; sptr = sptr->next) { - if (sptr->b_s_open) { /* there may be no backing store */ - sptr->b_s_open = FALSE; /* prevent recursive close if error */ - (*sptr->b_s_info.close_backing_store) (cinfo, & sptr->b_s_info); - } - } - mem->virt_sarray_list = NULL; - for (bptr = mem->virt_barray_list; bptr != NULL; bptr = bptr->next) { - if (bptr->b_s_open) { /* there may be no backing store */ - bptr->b_s_open = FALSE; /* prevent recursive close if error */ - (*bptr->b_s_info.close_backing_store) (cinfo, & bptr->b_s_info); - } - } - mem->virt_barray_list = NULL; - } - - /* Release large objects */ - lhdr_ptr = mem->large_list[pool_id]; - mem->large_list[pool_id] = NULL; - - while (lhdr_ptr != NULL) { - large_pool_ptr next_lhdr_ptr = lhdr_ptr->hdr.next; - space_freed = lhdr_ptr->hdr.bytes_used + - lhdr_ptr->hdr.bytes_left + - SIZEOF(large_pool_hdr); - jpeg_free_large(cinfo, (void FAR *) lhdr_ptr, space_freed); - mem->total_space_allocated -= space_freed; - lhdr_ptr = next_lhdr_ptr; - } - - /* Release small objects */ - shdr_ptr = mem->small_list[pool_id]; - mem->small_list[pool_id] = NULL; - - while (shdr_ptr != NULL) { - small_pool_ptr next_shdr_ptr = shdr_ptr->hdr.next; - space_freed = shdr_ptr->hdr.bytes_used + - shdr_ptr->hdr.bytes_left + - SIZEOF(small_pool_hdr); - jpeg_free_small(cinfo, (void *) shdr_ptr, space_freed); - mem->total_space_allocated -= space_freed; - shdr_ptr = next_shdr_ptr; - } -} - - -/* - * Close up shop entirely. - * Note that this cannot be called unless cinfo->mem is non-NULL. - */ - -METHODDEF(void) -self_destruct (j_common_ptr cinfo) -{ - int pool; - - /* Close all backing store, release all memory. - * Releasing pools in reverse order might help avoid fragmentation - * with some (brain-damaged) malloc libraries. - */ - for (pool = JPOOL_NUMPOOLS-1; pool >= JPOOL_PERMANENT; pool--) { - free_pool(cinfo, pool); - } - - /* Release the memory manager control block too. */ - jpeg_free_small(cinfo, (void *) cinfo->mem, SIZEOF(my_memory_mgr)); - cinfo->mem = NULL; /* ensures I will be called only once */ - - jpeg_mem_term(cinfo); /* system-dependent cleanup */ -} - - -/* - * Memory manager initialization. - * When this is called, only the error manager pointer is valid in cinfo! - */ - -GLOBAL(void) -jinit_memory_mgr (j_common_ptr cinfo) -{ - my_mem_ptr mem; - long max_to_use; - int pool; - size_t test_mac; - - cinfo->mem = NULL; /* for safety if init fails */ - - /* Check for configuration errors. - * SIZEOF(ALIGN_TYPE) should be a power of 2; otherwise, it probably - * doesn't reflect any real hardware alignment requirement. - * The test is a little tricky: for X>0, X and X-1 have no one-bits - * in common if and only if X is a power of 2, ie has only one one-bit. - * Some compilers may give an "unreachable code" warning here; ignore it. - */ - if ((SIZEOF(ALIGN_TYPE) & (SIZEOF(ALIGN_TYPE)-1)) != 0) - ERREXIT(cinfo, JERR_BAD_ALIGN_TYPE); - /* MAX_ALLOC_CHUNK must be representable as type size_t, and must be - * a multiple of SIZEOF(ALIGN_TYPE). - * Again, an "unreachable code" warning may be ignored here. - * But a "constant too large" warning means you need to fix MAX_ALLOC_CHUNK. - */ - test_mac = (size_t) MAX_ALLOC_CHUNK; - if ((long) test_mac != MAX_ALLOC_CHUNK || - (MAX_ALLOC_CHUNK % SIZEOF(ALIGN_TYPE)) != 0) - ERREXIT(cinfo, JERR_BAD_ALLOC_CHUNK); - - max_to_use = jpeg_mem_init(cinfo); /* system-dependent initialization */ - - /* Attempt to allocate memory manager's control block */ - mem = (my_mem_ptr) jpeg_get_small(cinfo, SIZEOF(my_memory_mgr)); - - if (mem == NULL) { - jpeg_mem_term(cinfo); /* system-dependent cleanup */ - ERREXIT1(cinfo, JERR_OUT_OF_MEMORY, 0); - } - - /* OK, fill in the method pointers */ - mem->pub.alloc_small = alloc_small; - mem->pub.alloc_large = alloc_large; - mem->pub.alloc_sarray = alloc_sarray; - mem->pub.alloc_barray = alloc_barray; - mem->pub.request_virt_sarray = request_virt_sarray; - mem->pub.request_virt_barray = request_virt_barray; - mem->pub.realize_virt_arrays = realize_virt_arrays; - mem->pub.access_virt_sarray = access_virt_sarray; - mem->pub.access_virt_barray = access_virt_barray; - mem->pub.free_pool = free_pool; - mem->pub.self_destruct = self_destruct; - - /* Make MAX_ALLOC_CHUNK accessible to other modules */ - mem->pub.max_alloc_chunk = MAX_ALLOC_CHUNK; - - /* Initialize working state */ - mem->pub.max_memory_to_use = max_to_use; - - for (pool = JPOOL_NUMPOOLS-1; pool >= JPOOL_PERMANENT; pool--) { - mem->small_list[pool] = NULL; - mem->large_list[pool] = NULL; - } - mem->virt_sarray_list = NULL; - mem->virt_barray_list = NULL; - - mem->total_space_allocated = SIZEOF(my_memory_mgr); - - /* Declare ourselves open for business */ - cinfo->mem = & mem->pub; - - /* Check for an environment variable JPEGMEM; if found, override the - * default max_memory setting from jpeg_mem_init. Note that the - * surrounding application may again override this value. - * If your system doesn't support getenv(), define NO_GETENV to disable - * this feature. - */ -#ifndef NO_GETENV - { char * memenv; - - if ((memenv = getenv("JPEGMEM")) != NULL) { - char ch = 'x'; - - if (sscanf(memenv, "%ld%c", &max_to_use, &ch) > 0) { - if (ch == 'm' || ch == 'M') - max_to_use *= 1000L; - mem->pub.max_memory_to_use = max_to_use * 1000L; - } - } - } -#endif - -} diff --git a/jpeg/jmemname.c b/jpeg/jmemname.c deleted file mode 100755 index ed96dee..0000000 --- a/jpeg/jmemname.c +++ /dev/null @@ -1,276 +0,0 @@ -/* - * jmemname.c - * - * Copyright (C) 1992-1997, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file provides a generic implementation of the system-dependent - * portion of the JPEG memory manager. This implementation assumes that - * you must explicitly construct a name for each temp file. - * Also, the problem of determining the amount of memory available - * is shoved onto the user. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" -#include "jmemsys.h" /* import the system-dependent declarations */ - -#ifndef HAVE_STDLIB_H /* should declare malloc(),free() */ -extern void * malloc JPP((size_t size)); -extern void free JPP((void *ptr)); -#endif - -#ifndef SEEK_SET /* pre-ANSI systems may not define this; */ -#define SEEK_SET 0 /* if not, assume 0 is correct */ -#endif - -#ifdef DONT_USE_B_MODE /* define mode parameters for fopen() */ -#define READ_BINARY "r" -#define RW_BINARY "w+" -#else -#ifdef VMS /* VMS is very nonstandard */ -#define READ_BINARY "rb", "ctx=stm" -#define RW_BINARY "w+b", "ctx=stm" -#else /* standard ANSI-compliant case */ -#define READ_BINARY "rb" -#define RW_BINARY "w+b" -#endif -#endif - - -/* - * Selection of a file name for a temporary file. - * This is system-dependent! - * - * The code as given is suitable for most Unix systems, and it is easily - * modified for most non-Unix systems. Some notes: - * 1. The temp file is created in the directory named by TEMP_DIRECTORY. - * The default value is /usr/tmp, which is the conventional place for - * creating large temp files on Unix. On other systems you'll probably - * want to change the file location. You can do this by editing the - * #define, or (preferred) by defining TEMP_DIRECTORY in jconfig.h. - * - * 2. If you need to change the file name as well as its location, - * you can override the TEMP_FILE_NAME macro. (Note that this is - * actually a printf format string; it must contain %s and %d.) - * Few people should need to do this. - * - * 3. mktemp() is used to ensure that multiple processes running - * simultaneously won't select the same file names. If your system - * doesn't have mktemp(), define NO_MKTEMP to do it the hard way. - * (If you don't have , also define NO_ERRNO_H.) - * - * 4. You probably want to define NEED_SIGNAL_CATCHER so that cjpeg.c/djpeg.c - * will cause the temp files to be removed if you stop the program early. - */ - -#ifndef TEMP_DIRECTORY /* can override from jconfig.h or Makefile */ -#define TEMP_DIRECTORY "/usr/tmp/" /* recommended setting for Unix */ -#endif - -static int next_file_num; /* to distinguish among several temp files */ - -#ifdef NO_MKTEMP - -#ifndef TEMP_FILE_NAME /* can override from jconfig.h or Makefile */ -#define TEMP_FILE_NAME "%sJPG%03d.TMP" -#endif - -#ifndef NO_ERRNO_H -#include /* to define ENOENT */ -#endif - -/* ANSI C specifies that errno is a macro, but on older systems it's more - * likely to be a plain int variable. And not all versions of errno.h - * bother to declare it, so we have to in order to be most portable. Thus: - */ -#ifndef errno -extern int errno; -#endif - - -LOCAL(void) -select_file_name (char * fname) -{ - FILE * tfile; - - /* Keep generating file names till we find one that's not in use */ - for (;;) { - next_file_num++; /* advance counter */ - sprintf(fname, TEMP_FILE_NAME, TEMP_DIRECTORY, next_file_num); - if ((tfile = fopen(fname, READ_BINARY)) == NULL) { - /* fopen could have failed for a reason other than the file not - * being there; for example, file there but unreadable. - * If isn't available, then we cannot test the cause. - */ -#ifdef ENOENT - if (errno != ENOENT) - continue; -#endif - break; - } - fclose(tfile); /* oops, it's there; close tfile & try again */ - } -} - -#else /* ! NO_MKTEMP */ - -/* Note that mktemp() requires the initial filename to end in six X's */ -#ifndef TEMP_FILE_NAME /* can override from jconfig.h or Makefile */ -#define TEMP_FILE_NAME "%sJPG%dXXXXXX" -#endif - -LOCAL(void) -select_file_name (char * fname) -{ - next_file_num++; /* advance counter */ - sprintf(fname, TEMP_FILE_NAME, TEMP_DIRECTORY, next_file_num); - mktemp(fname); /* make sure file name is unique */ - /* mktemp replaces the trailing XXXXXX with a unique string of characters */ -} - -#endif /* NO_MKTEMP */ - - -/* - * Memory allocation and freeing are controlled by the regular library - * routines malloc() and free(). - */ - -GLOBAL(void *) -jpeg_get_small (j_common_ptr cinfo, size_t sizeofobject) -{ - return (void *) malloc(sizeofobject); -} - -GLOBAL(void) -jpeg_free_small (j_common_ptr cinfo, void * object, size_t sizeofobject) -{ - free(object); -} - - -/* - * "Large" objects are treated the same as "small" ones. - * NB: although we include FAR keywords in the routine declarations, - * this file won't actually work in 80x86 small/medium model; at least, - * you probably won't be able to process useful-size images in only 64KB. - */ - -GLOBAL(void FAR *) -jpeg_get_large (j_common_ptr cinfo, size_t sizeofobject) -{ - return (void FAR *) malloc(sizeofobject); -} - -GLOBAL(void) -jpeg_free_large (j_common_ptr cinfo, void FAR * object, size_t sizeofobject) -{ - free(object); -} - - -/* - * This routine computes the total memory space available for allocation. - * It's impossible to do this in a portable way; our current solution is - * to make the user tell us (with a default value set at compile time). - * If you can actually get the available space, it's a good idea to subtract - * a slop factor of 5% or so. - */ - -#ifndef DEFAULT_MAX_MEM /* so can override from makefile */ -#define DEFAULT_MAX_MEM 1000000L /* default: one megabyte */ -#endif - -GLOBAL(long) -jpeg_mem_available (j_common_ptr cinfo, long min_bytes_needed, - long max_bytes_needed, long already_allocated) -{ - return cinfo->mem->max_memory_to_use - already_allocated; -} - - -/* - * Backing store (temporary file) management. - * Backing store objects are only used when the value returned by - * jpeg_mem_available is less than the total space needed. You can dispense - * with these routines if you have plenty of virtual memory; see jmemnobs.c. - */ - - -METHODDEF(void) -read_backing_store (j_common_ptr cinfo, backing_store_ptr info, - void FAR * buffer_address, - long file_offset, long byte_count) -{ - if (fseek(info->temp_file, file_offset, SEEK_SET)) - ERREXIT(cinfo, JERR_TFILE_SEEK); - if (JFREAD(info->temp_file, buffer_address, byte_count) - != (size_t) byte_count) - ERREXIT(cinfo, JERR_TFILE_READ); -} - - -METHODDEF(void) -write_backing_store (j_common_ptr cinfo, backing_store_ptr info, - void FAR * buffer_address, - long file_offset, long byte_count) -{ - if (fseek(info->temp_file, file_offset, SEEK_SET)) - ERREXIT(cinfo, JERR_TFILE_SEEK); - if (JFWRITE(info->temp_file, buffer_address, byte_count) - != (size_t) byte_count) - ERREXIT(cinfo, JERR_TFILE_WRITE); -} - - -METHODDEF(void) -close_backing_store (j_common_ptr cinfo, backing_store_ptr info) -{ - fclose(info->temp_file); /* close the file */ - unlink(info->temp_name); /* delete the file */ -/* If your system doesn't have unlink(), use remove() instead. - * remove() is the ANSI-standard name for this function, but if - * your system was ANSI you'd be using jmemansi.c, right? - */ - TRACEMSS(cinfo, 1, JTRC_TFILE_CLOSE, info->temp_name); -} - - -/* - * Initial opening of a backing-store object. - */ - -GLOBAL(void) -jpeg_open_backing_store (j_common_ptr cinfo, backing_store_ptr info, - long total_bytes_needed) -{ - select_file_name(info->temp_name); - if ((info->temp_file = fopen(info->temp_name, RW_BINARY)) == NULL) - ERREXITS(cinfo, JERR_TFILE_CREATE, info->temp_name); - info->read_backing_store = read_backing_store; - info->write_backing_store = write_backing_store; - info->close_backing_store = close_backing_store; - TRACEMSS(cinfo, 1, JTRC_TFILE_OPEN, info->temp_name); -} - - -/* - * These routines take care of any system-dependent initialization and - * cleanup required. - */ - -GLOBAL(long) -jpeg_mem_init (j_common_ptr cinfo) -{ - next_file_num = 0; /* initialize temp file name generator */ - return DEFAULT_MAX_MEM; /* default for max_memory_to_use */ -} - -GLOBAL(void) -jpeg_mem_term (j_common_ptr cinfo) -{ - /* no work */ -} diff --git a/jpeg/jmemnobs.c b/jpeg/jmemnobs.c deleted file mode 100755 index eb8c337..0000000 --- a/jpeg/jmemnobs.c +++ /dev/null @@ -1,109 +0,0 @@ -/* - * jmemnobs.c - * - * Copyright (C) 1992-1996, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file provides a really simple implementation of the system- - * dependent portion of the JPEG memory manager. This implementation - * assumes that no backing-store files are needed: all required space - * can be obtained from malloc(). - * This is very portable in the sense that it'll compile on almost anything, - * but you'd better have lots of main memory (or virtual memory) if you want - * to process big images. - * Note that the max_memory_to_use option is ignored by this implementation. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" -#include "jmemsys.h" /* import the system-dependent declarations */ - -#ifndef HAVE_STDLIB_H /* should declare malloc(),free() */ -extern void * malloc JPP((size_t size)); -extern void free JPP((void *ptr)); -#endif - - -/* - * Memory allocation and freeing are controlled by the regular library - * routines malloc() and free(). - */ - -GLOBAL(void *) -jpeg_get_small (j_common_ptr cinfo, size_t sizeofobject) -{ - return (void *) malloc(sizeofobject); -} - -GLOBAL(void) -jpeg_free_small (j_common_ptr cinfo, void * object, size_t sizeofobject) -{ - free(object); -} - - -/* - * "Large" objects are treated the same as "small" ones. - * NB: although we include FAR keywords in the routine declarations, - * this file won't actually work in 80x86 small/medium model; at least, - * you probably won't be able to process useful-size images in only 64KB. - */ - -GLOBAL(void FAR *) -jpeg_get_large (j_common_ptr cinfo, size_t sizeofobject) -{ - return (void FAR *) malloc(sizeofobject); -} - -GLOBAL(void) -jpeg_free_large (j_common_ptr cinfo, void FAR * object, size_t sizeofobject) -{ - free(object); -} - - -/* - * This routine computes the total memory space available for allocation. - * Here we always say, "we got all you want bud!" - */ - -GLOBAL(long) -jpeg_mem_available (j_common_ptr cinfo, long min_bytes_needed, - long max_bytes_needed, long already_allocated) -{ - return max_bytes_needed; -} - - -/* - * Backing store (temporary file) management. - * Since jpeg_mem_available always promised the moon, - * this should never be called and we can just error out. - */ - -GLOBAL(void) -jpeg_open_backing_store (j_common_ptr cinfo, backing_store_ptr info, - long total_bytes_needed) -{ - ERREXIT(cinfo, JERR_NO_BACKING_STORE); -} - - -/* - * These routines take care of any system-dependent initialization and - * cleanup required. Here, there isn't any. - */ - -GLOBAL(long) -jpeg_mem_init (j_common_ptr cinfo) -{ - return 0; /* just set max_memory_to_use to 0 */ -} - -GLOBAL(void) -jpeg_mem_term (j_common_ptr cinfo) -{ - /* no work */ -} diff --git a/jpeg/jmemsys.h b/jpeg/jmemsys.h deleted file mode 100755 index 6c3c6d3..0000000 --- a/jpeg/jmemsys.h +++ /dev/null @@ -1,198 +0,0 @@ -/* - * jmemsys.h - * - * Copyright (C) 1992-1997, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This include file defines the interface between the system-independent - * and system-dependent portions of the JPEG memory manager. No other - * modules need include it. (The system-independent portion is jmemmgr.c; - * there are several different versions of the system-dependent portion.) - * - * This file works as-is for the system-dependent memory managers supplied - * in the IJG distribution. You may need to modify it if you write a - * custom memory manager. If system-dependent changes are needed in - * this file, the best method is to #ifdef them based on a configuration - * symbol supplied in jconfig.h, as we have done with USE_MSDOS_MEMMGR - * and USE_MAC_MEMMGR. - */ - - -/* Short forms of external names for systems with brain-damaged linkers. */ - -#ifdef NEED_SHORT_EXTERNAL_NAMES -#define jpeg_get_small jGetSmall -#define jpeg_free_small jFreeSmall -#define jpeg_get_large jGetLarge -#define jpeg_free_large jFreeLarge -#define jpeg_mem_available jMemAvail -#define jpeg_open_backing_store jOpenBackStore -#define jpeg_mem_init jMemInit -#define jpeg_mem_term jMemTerm -#endif /* NEED_SHORT_EXTERNAL_NAMES */ - - -/* - * These two functions are used to allocate and release small chunks of - * memory. (Typically the total amount requested through jpeg_get_small is - * no more than 20K or so; this will be requested in chunks of a few K each.) - * Behavior should be the same as for the standard library functions malloc - * and free; in particular, jpeg_get_small must return NULL on failure. - * On most systems, these ARE malloc and free. jpeg_free_small is passed the - * size of the object being freed, just in case it's needed. - * On an 80x86 machine using small-data memory model, these manage near heap. - */ - -EXTERN(void *) jpeg_get_small JPP((j_common_ptr cinfo, size_t sizeofobject)); -EXTERN(void) jpeg_free_small JPP((j_common_ptr cinfo, void * object, - size_t sizeofobject)); - -/* - * These two functions are used to allocate and release large chunks of - * memory (up to the total free space designated by jpeg_mem_available). - * The interface is the same as above, except that on an 80x86 machine, - * far pointers are used. On most other machines these are identical to - * the jpeg_get/free_small routines; but we keep them separate anyway, - * in case a different allocation strategy is desirable for large chunks. - */ - -EXTERN(void FAR *) jpeg_get_large JPP((j_common_ptr cinfo, - size_t sizeofobject)); -EXTERN(void) jpeg_free_large JPP((j_common_ptr cinfo, void FAR * object, - size_t sizeofobject)); - -/* - * The macro MAX_ALLOC_CHUNK designates the maximum number of bytes that may - * be requested in a single call to jpeg_get_large (and jpeg_get_small for that - * matter, but that case should never come into play). This macro is needed - * to model the 64Kb-segment-size limit of far addressing on 80x86 machines. - * On those machines, we expect that jconfig.h will provide a proper value. - * On machines with 32-bit flat address spaces, any large constant may be used. - * - * NB: jmemmgr.c expects that MAX_ALLOC_CHUNK will be representable as type - * size_t and will be a multiple of sizeof(align_type). - */ - -#ifndef MAX_ALLOC_CHUNK /* may be overridden in jconfig.h */ -#define MAX_ALLOC_CHUNK 1000000000L -#endif - -/* - * This routine computes the total space still available for allocation by - * jpeg_get_large. If more space than this is needed, backing store will be - * used. NOTE: any memory already allocated must not be counted. - * - * There is a minimum space requirement, corresponding to the minimum - * feasible buffer sizes; jmemmgr.c will request that much space even if - * jpeg_mem_available returns zero. The maximum space needed, enough to hold - * all working storage in memory, is also passed in case it is useful. - * Finally, the total space already allocated is passed. If no better - * method is available, cinfo->mem->max_memory_to_use - already_allocated - * is often a suitable calculation. - * - * It is OK for jpeg_mem_available to underestimate the space available - * (that'll just lead to more backing-store access than is really necessary). - * However, an overestimate will lead to failure. Hence it's wise to subtract - * a slop factor from the true available space. 5% should be enough. - * - * On machines with lots of virtual memory, any large constant may be returned. - * Conversely, zero may be returned to always use the minimum amount of memory. - */ - -EXTERN(long) jpeg_mem_available JPP((j_common_ptr cinfo, - long min_bytes_needed, - long max_bytes_needed, - long already_allocated)); - - -/* - * This structure holds whatever state is needed to access a single - * backing-store object. The read/write/close method pointers are called - * by jmemmgr.c to manipulate the backing-store object; all other fields - * are private to the system-dependent backing store routines. - */ - -#define TEMP_NAME_LENGTH 64 /* max length of a temporary file's name */ - - -#ifdef USE_MSDOS_MEMMGR /* DOS-specific junk */ - -typedef unsigned short XMSH; /* type of extended-memory handles */ -typedef unsigned short EMSH; /* type of expanded-memory handles */ - -typedef union { - short file_handle; /* DOS file handle if it's a temp file */ - XMSH xms_handle; /* handle if it's a chunk of XMS */ - EMSH ems_handle; /* handle if it's a chunk of EMS */ -} handle_union; - -#endif /* USE_MSDOS_MEMMGR */ - -#ifdef USE_MAC_MEMMGR /* Mac-specific junk */ -#include -#endif /* USE_MAC_MEMMGR */ - - -typedef struct backing_store_struct * backing_store_ptr; - -typedef struct backing_store_struct { - /* Methods for reading/writing/closing this backing-store object */ - JMETHOD(void, read_backing_store, (j_common_ptr cinfo, - backing_store_ptr info, - void FAR * buffer_address, - long file_offset, long byte_count)); - JMETHOD(void, write_backing_store, (j_common_ptr cinfo, - backing_store_ptr info, - void FAR * buffer_address, - long file_offset, long byte_count)); - JMETHOD(void, close_backing_store, (j_common_ptr cinfo, - backing_store_ptr info)); - - /* Private fields for system-dependent backing-store management */ -#ifdef USE_MSDOS_MEMMGR - /* For the MS-DOS manager (jmemdos.c), we need: */ - handle_union handle; /* reference to backing-store storage object */ - char temp_name[TEMP_NAME_LENGTH]; /* name if it's a file */ -#else -#ifdef USE_MAC_MEMMGR - /* For the Mac manager (jmemmac.c), we need: */ - short temp_file; /* file reference number to temp file */ - FSSpec tempSpec; /* the FSSpec for the temp file */ - char temp_name[TEMP_NAME_LENGTH]; /* name if it's a file */ -#else - /* For a typical implementation with temp files, we need: */ - FILE * temp_file; /* stdio reference to temp file */ - char temp_name[TEMP_NAME_LENGTH]; /* name of temp file */ -#endif -#endif -} backing_store_info; - - -/* - * Initial opening of a backing-store object. This must fill in the - * read/write/close pointers in the object. The read/write routines - * may take an error exit if the specified maximum file size is exceeded. - * (If jpeg_mem_available always returns a large value, this routine can - * just take an error exit.) - */ - -EXTERN(void) jpeg_open_backing_store JPP((j_common_ptr cinfo, - backing_store_ptr info, - long total_bytes_needed)); - - -/* - * These routines take care of any system-dependent initialization and - * cleanup required. jpeg_mem_init will be called before anything is - * allocated (and, therefore, nothing in cinfo is of use except the error - * manager pointer). It should return a suitable default value for - * max_memory_to_use; this may subsequently be overridden by the surrounding - * application. (Note that max_memory_to_use is only important if - * jpeg_mem_available chooses to consult it ... no one else will.) - * jpeg_mem_term may assume that all requested memory has been freed and that - * all opened backing-store objects have been closed. - */ - -EXTERN(long) jpeg_mem_init JPP((j_common_ptr cinfo)); -EXTERN(void) jpeg_mem_term JPP((j_common_ptr cinfo)); diff --git a/jpeg/jmorecfg.h b/jpeg/jmorecfg.h deleted file mode 100755 index 6c085c3..0000000 --- a/jpeg/jmorecfg.h +++ /dev/null @@ -1,369 +0,0 @@ -/* - * jmorecfg.h - * - * Copyright (C) 1991-1997, Thomas G. Lane. - * Modified 1997-2011 by Guido Vollbeding. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains additional configuration options that customize the - * JPEG software for special applications or support machine-dependent - * optimizations. Most users will not need to touch this file. - */ - - -/* - * Define BITS_IN_JSAMPLE as either - * 8 for 8-bit sample values (the usual setting) - * 12 for 12-bit sample values - * Only 8 and 12 are legal data precisions for lossy JPEG according to the - * JPEG standard, and the IJG code does not support anything else! - * We do not support run-time selection of data precision, sorry. - */ - -#define BITS_IN_JSAMPLE 8 /* use 8 or 12 */ - - -/* - * Maximum number of components (color channels) allowed in JPEG image. - * To meet the letter of the JPEG spec, set this to 255. However, darn - * few applications need more than 4 channels (maybe 5 for CMYK + alpha - * mask). We recommend 10 as a reasonable compromise; use 4 if you are - * really short on memory. (Each allowed component costs a hundred or so - * bytes of storage, whether actually used in an image or not.) - */ - -#define MAX_COMPONENTS 10 /* maximum number of image components */ - - -/* - * Basic data types. - * You may need to change these if you have a machine with unusual data - * type sizes; for example, "char" not 8 bits, "short" not 16 bits, - * or "long" not 32 bits. We don't care whether "int" is 16 or 32 bits, - * but it had better be at least 16. - */ - -/* Representation of a single sample (pixel element value). - * We frequently allocate large arrays of these, so it's important to keep - * them small. But if you have memory to burn and access to char or short - * arrays is very slow on your hardware, you might want to change these. - */ - -#if BITS_IN_JSAMPLE == 8 -/* JSAMPLE should be the smallest type that will hold the values 0..255. - * You can use a signed char by having GETJSAMPLE mask it with 0xFF. - */ - -#ifdef HAVE_UNSIGNED_CHAR - -typedef unsigned char JSAMPLE; -#define GETJSAMPLE(value) ((int) (value)) - -#else /* not HAVE_UNSIGNED_CHAR */ - -typedef char JSAMPLE; -#ifdef CHAR_IS_UNSIGNED -#define GETJSAMPLE(value) ((int) (value)) -#else -#define GETJSAMPLE(value) ((int) (value) & 0xFF) -#endif /* CHAR_IS_UNSIGNED */ - -#endif /* HAVE_UNSIGNED_CHAR */ - -#define MAXJSAMPLE 255 -#define CENTERJSAMPLE 128 - -#endif /* BITS_IN_JSAMPLE == 8 */ - - -#if BITS_IN_JSAMPLE == 12 -/* JSAMPLE should be the smallest type that will hold the values 0..4095. - * On nearly all machines "short" will do nicely. - */ - -typedef short JSAMPLE; -#define GETJSAMPLE(value) ((int) (value)) - -#define MAXJSAMPLE 4095 -#define CENTERJSAMPLE 2048 - -#endif /* BITS_IN_JSAMPLE == 12 */ - - -/* Representation of a DCT frequency coefficient. - * This should be a signed value of at least 16 bits; "short" is usually OK. - * Again, we allocate large arrays of these, but you can change to int - * if you have memory to burn and "short" is really slow. - */ - -typedef short JCOEF; - - -/* Compressed datastreams are represented as arrays of JOCTET. - * These must be EXACTLY 8 bits wide, at least once they are written to - * external storage. Note that when using the stdio data source/destination - * managers, this is also the data type passed to fread/fwrite. - */ - -#ifdef HAVE_UNSIGNED_CHAR - -typedef unsigned char JOCTET; -#define GETJOCTET(value) (value) - -#else /* not HAVE_UNSIGNED_CHAR */ - -typedef char JOCTET; -#ifdef CHAR_IS_UNSIGNED -#define GETJOCTET(value) (value) -#else -#define GETJOCTET(value) ((value) & 0xFF) -#endif /* CHAR_IS_UNSIGNED */ - -#endif /* HAVE_UNSIGNED_CHAR */ - - -/* These typedefs are used for various table entries and so forth. - * They must be at least as wide as specified; but making them too big - * won't cost a huge amount of memory, so we don't provide special - * extraction code like we did for JSAMPLE. (In other words, these - * typedefs live at a different point on the speed/space tradeoff curve.) - */ - -/* UINT8 must hold at least the values 0..255. */ - -#ifdef HAVE_UNSIGNED_CHAR -typedef unsigned char UINT8; -#else /* not HAVE_UNSIGNED_CHAR */ -#ifdef CHAR_IS_UNSIGNED -typedef char UINT8; -#else /* not CHAR_IS_UNSIGNED */ -typedef short UINT8; -#endif /* CHAR_IS_UNSIGNED */ -#endif /* HAVE_UNSIGNED_CHAR */ - -/* UINT16 must hold at least the values 0..65535. */ - -#ifdef HAVE_UNSIGNED_SHORT -typedef unsigned short UINT16; -#else /* not HAVE_UNSIGNED_SHORT */ -typedef unsigned int UINT16; -#endif /* HAVE_UNSIGNED_SHORT */ - -/* INT16 must hold at least the values -32768..32767. */ - -#ifndef XMD_H /* X11/xmd.h correctly defines INT16 */ -typedef short INT16; -#endif - -/* INT32 must hold at least signed 32-bit values. */ - -#ifndef XMD_H /* X11/xmd.h correctly defines INT32 */ -#ifndef _BASETSD_H_ /* Microsoft defines it in basetsd.h */ -#ifndef _BASETSD_H /* MinGW is slightly different */ -#ifndef QGLOBAL_H /* Qt defines it in qglobal.h */ -typedef long INT32; -#endif -#endif -#endif -#endif - -/* Datatype used for image dimensions. The JPEG standard only supports - * images up to 64K*64K due to 16-bit fields in SOF markers. Therefore - * "unsigned int" is sufficient on all machines. However, if you need to - * handle larger images and you don't mind deviating from the spec, you - * can change this datatype. - */ - -typedef unsigned int JDIMENSION; - -#define JPEG_MAX_DIMENSION 65500L /* a tad under 64K to prevent overflows */ - - -/* These macros are used in all function definitions and extern declarations. - * You could modify them if you need to change function linkage conventions; - * in particular, you'll need to do that to make the library a Windows DLL. - * Another application is to make all functions global for use with debuggers - * or code profilers that require it. - */ - -/* a function called through method pointers: */ -#define METHODDEF(type) static type -/* a function used only in its module: */ -#define LOCAL(type) static type -/* a function referenced thru EXTERNs: */ -#define GLOBAL(type) type -/* a reference to a GLOBAL function: */ -#define EXTERN(type) extern type - - -/* This macro is used to declare a "method", that is, a function pointer. - * We want to supply prototype parameters if the compiler can cope. - * Note that the arglist parameter must be parenthesized! - * Again, you can customize this if you need special linkage keywords. - */ - -#ifdef HAVE_PROTOTYPES -#define JMETHOD(type,methodname,arglist) type (*methodname) arglist -#else -#define JMETHOD(type,methodname,arglist) type (*methodname) () -#endif - - -/* Here is the pseudo-keyword for declaring pointers that must be "far" - * on 80x86 machines. Most of the specialized coding for 80x86 is handled - * by just saying "FAR *" where such a pointer is needed. In a few places - * explicit coding is needed; see uses of the NEED_FAR_POINTERS symbol. - */ - -#ifndef FAR -#ifdef NEED_FAR_POINTERS -#define FAR far -#else -#define FAR -#endif -#endif - - -/* - * On a few systems, type boolean and/or its values FALSE, TRUE may appear - * in standard header files. Or you may have conflicts with application- - * specific header files that you want to include together with these files. - * Defining HAVE_BOOLEAN before including jpeglib.h should make it work. - */ - -#ifndef HAVE_BOOLEAN -typedef int boolean; -#endif -#ifndef FALSE /* in case these macros already exist */ -#define FALSE 0 /* values of boolean */ -#endif -#ifndef TRUE -#define TRUE 1 -#endif - - -/* - * The remaining options affect code selection within the JPEG library, - * but they don't need to be visible to most applications using the library. - * To minimize application namespace pollution, the symbols won't be - * defined unless JPEG_INTERNALS or JPEG_INTERNAL_OPTIONS has been defined. - */ - -#ifdef JPEG_INTERNALS -#define JPEG_INTERNAL_OPTIONS -#endif - -#ifdef JPEG_INTERNAL_OPTIONS - - -/* - * These defines indicate whether to include various optional functions. - * Undefining some of these symbols will produce a smaller but less capable - * library. Note that you can leave certain source files out of the - * compilation/linking process if you've #undef'd the corresponding symbols. - * (You may HAVE to do that if your compiler doesn't like null source files.) - */ - -/* Capability options common to encoder and decoder: */ - -#define DCT_ISLOW_SUPPORTED /* slow but accurate integer algorithm */ -#define DCT_IFAST_SUPPORTED /* faster, less accurate integer method */ -#define DCT_FLOAT_SUPPORTED /* floating-point: accurate, fast on fast HW */ - -/* Encoder capability options: */ - -#define C_ARITH_CODING_SUPPORTED /* Arithmetic coding back end? */ -#define C_MULTISCAN_FILES_SUPPORTED /* Multiple-scan JPEG files? */ -#define C_PROGRESSIVE_SUPPORTED /* Progressive JPEG? (Requires MULTISCAN)*/ -#define DCT_SCALING_SUPPORTED /* Input rescaling via DCT? (Requires DCT_ISLOW)*/ -#define ENTROPY_OPT_SUPPORTED /* Optimization of entropy coding parms? */ -/* Note: if you selected 12-bit data precision, it is dangerous to turn off - * ENTROPY_OPT_SUPPORTED. The standard Huffman tables are only good for 8-bit - * precision, so jchuff.c normally uses entropy optimization to compute - * usable tables for higher precision. If you don't want to do optimization, - * you'll have to supply different default Huffman tables. - * The exact same statements apply for progressive JPEG: the default tables - * don't work for progressive mode. (This may get fixed, however.) - */ -#define INPUT_SMOOTHING_SUPPORTED /* Input image smoothing option? */ - -/* Decoder capability options: */ - -#define D_ARITH_CODING_SUPPORTED /* Arithmetic coding back end? */ -#define D_MULTISCAN_FILES_SUPPORTED /* Multiple-scan JPEG files? */ -#define D_PROGRESSIVE_SUPPORTED /* Progressive JPEG? (Requires MULTISCAN)*/ -#define IDCT_SCALING_SUPPORTED /* Output rescaling via IDCT? */ -#define SAVE_MARKERS_SUPPORTED /* jpeg_save_markers() needed? */ -#define BLOCK_SMOOTHING_SUPPORTED /* Block smoothing? (Progressive only) */ -#undef UPSAMPLE_SCALING_SUPPORTED /* Output rescaling at upsample stage? */ -#define UPSAMPLE_MERGING_SUPPORTED /* Fast path for sloppy upsampling? */ -#define QUANT_1PASS_SUPPORTED /* 1-pass color quantization? */ -#define QUANT_2PASS_SUPPORTED /* 2-pass color quantization? */ - -/* more capability options later, no doubt */ - - -/* - * Ordering of RGB data in scanlines passed to or from the application. - * If your application wants to deal with data in the order B,G,R, just - * change these macros. You can also deal with formats such as R,G,B,X - * (one extra byte per pixel) by changing RGB_PIXELSIZE. Note that changing - * the offsets will also change the order in which colormap data is organized. - * RESTRICTIONS: - * 1. The sample applications cjpeg,djpeg do NOT support modified RGB formats. - * 2. The color quantizer modules will not behave desirably if RGB_PIXELSIZE - * is not 3 (they don't understand about dummy color components!). So you - * can't use color quantization if you change that value. - */ - -#define RGB_RED 0 /* Offset of Red in an RGB scanline element */ -#define RGB_GREEN 1 /* Offset of Green */ -#define RGB_BLUE 2 /* Offset of Blue */ -#define RGB_PIXELSIZE 3 /* JSAMPLEs per RGB scanline element */ - - -/* Definitions for speed-related optimizations. */ - - -/* If your compiler supports inline functions, define INLINE - * as the inline keyword; otherwise define it as empty. - */ - -#ifndef INLINE -#ifdef __GNUC__ /* for instance, GNU C knows about inline */ -#define INLINE __inline__ -#endif -#ifndef INLINE -#define INLINE /* default is to define it as empty */ -#endif -#endif - - -/* On some machines (notably 68000 series) "int" is 32 bits, but multiplying - * two 16-bit shorts is faster than multiplying two ints. Define MULTIPLIER - * as short on such a machine. MULTIPLIER must be at least 16 bits wide. - */ - -#ifndef MULTIPLIER -#define MULTIPLIER int /* type for fastest integer multiply */ -#endif - - -/* FAST_FLOAT should be either float or double, whichever is done faster - * by your compiler. (Note that this type is only used in the floating point - * DCT routines, so it only matters if you've defined DCT_FLOAT_SUPPORTED.) - * Typically, float is faster in ANSI C compilers, while double is faster in - * pre-ANSI compilers (because they insist on converting to double anyway). - * The code below therefore chooses float if we have ANSI-style prototypes. - */ - -#ifndef FAST_FLOAT -#ifdef HAVE_PROTOTYPES -#define FAST_FLOAT float -#else -#define FAST_FLOAT double -#endif -#endif - -#endif /* JPEG_INTERNAL_OPTIONS */ diff --git a/jpeg/jpegint.h b/jpeg/jpegint.h deleted file mode 100755 index c0d5c14..0000000 --- a/jpeg/jpegint.h +++ /dev/null @@ -1,426 +0,0 @@ -/* - * jpegint.h - * - * Copyright (C) 1991-1997, Thomas G. Lane. - * Modified 1997-2011 by Guido Vollbeding. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file provides common declarations for the various JPEG modules. - * These declarations are considered internal to the JPEG library; most - * applications using the library shouldn't need to include this file. - */ - - -/* Declarations for both compression & decompression */ - -typedef enum { /* Operating modes for buffer controllers */ - JBUF_PASS_THRU, /* Plain stripwise operation */ - /* Remaining modes require a full-image buffer to have been created */ - JBUF_SAVE_SOURCE, /* Run source subobject only, save output */ - JBUF_CRANK_DEST, /* Run dest subobject only, using saved data */ - JBUF_SAVE_AND_PASS /* Run both subobjects, save output */ -} J_BUF_MODE; - -/* Values of global_state field (jdapi.c has some dependencies on ordering!) */ -#define CSTATE_START 100 /* after create_compress */ -#define CSTATE_SCANNING 101 /* start_compress done, write_scanlines OK */ -#define CSTATE_RAW_OK 102 /* start_compress done, write_raw_data OK */ -#define CSTATE_WRCOEFS 103 /* jpeg_write_coefficients done */ -#define DSTATE_START 200 /* after create_decompress */ -#define DSTATE_INHEADER 201 /* reading header markers, no SOS yet */ -#define DSTATE_READY 202 /* found SOS, ready for start_decompress */ -#define DSTATE_PRELOAD 203 /* reading multiscan file in start_decompress*/ -#define DSTATE_PRESCAN 204 /* performing dummy pass for 2-pass quant */ -#define DSTATE_SCANNING 205 /* start_decompress done, read_scanlines OK */ -#define DSTATE_RAW_OK 206 /* start_decompress done, read_raw_data OK */ -#define DSTATE_BUFIMAGE 207 /* expecting jpeg_start_output */ -#define DSTATE_BUFPOST 208 /* looking for SOS/EOI in jpeg_finish_output */ -#define DSTATE_RDCOEFS 209 /* reading file in jpeg_read_coefficients */ -#define DSTATE_STOPPING 210 /* looking for EOI in jpeg_finish_decompress */ - - -/* Declarations for compression modules */ - -/* Master control module */ -struct jpeg_comp_master { - JMETHOD(void, prepare_for_pass, (j_compress_ptr cinfo)); - JMETHOD(void, pass_startup, (j_compress_ptr cinfo)); - JMETHOD(void, finish_pass, (j_compress_ptr cinfo)); - - /* State variables made visible to other modules */ - boolean call_pass_startup; /* True if pass_startup must be called */ - boolean is_last_pass; /* True during last pass */ -}; - -/* Main buffer control (downsampled-data buffer) */ -struct jpeg_c_main_controller { - JMETHOD(void, start_pass, (j_compress_ptr cinfo, J_BUF_MODE pass_mode)); - JMETHOD(void, process_data, (j_compress_ptr cinfo, - JSAMPARRAY input_buf, JDIMENSION *in_row_ctr, - JDIMENSION in_rows_avail)); -}; - -/* Compression preprocessing (downsampling input buffer control) */ -struct jpeg_c_prep_controller { - JMETHOD(void, start_pass, (j_compress_ptr cinfo, J_BUF_MODE pass_mode)); - JMETHOD(void, pre_process_data, (j_compress_ptr cinfo, - JSAMPARRAY input_buf, - JDIMENSION *in_row_ctr, - JDIMENSION in_rows_avail, - JSAMPIMAGE output_buf, - JDIMENSION *out_row_group_ctr, - JDIMENSION out_row_groups_avail)); -}; - -/* Coefficient buffer control */ -struct jpeg_c_coef_controller { - JMETHOD(void, start_pass, (j_compress_ptr cinfo, J_BUF_MODE pass_mode)); - JMETHOD(boolean, compress_data, (j_compress_ptr cinfo, - JSAMPIMAGE input_buf)); -}; - -/* Colorspace conversion */ -struct jpeg_color_converter { - JMETHOD(void, start_pass, (j_compress_ptr cinfo)); - JMETHOD(void, color_convert, (j_compress_ptr cinfo, - JSAMPARRAY input_buf, JSAMPIMAGE output_buf, - JDIMENSION output_row, int num_rows)); -}; - -/* Downsampling */ -struct jpeg_downsampler { - JMETHOD(void, start_pass, (j_compress_ptr cinfo)); - JMETHOD(void, downsample, (j_compress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION in_row_index, - JSAMPIMAGE output_buf, - JDIMENSION out_row_group_index)); - - boolean need_context_rows; /* TRUE if need rows above & below */ -}; - -/* Forward DCT (also controls coefficient quantization) */ -typedef JMETHOD(void, forward_DCT_ptr, - (j_compress_ptr cinfo, jpeg_component_info * compptr, - JSAMPARRAY sample_data, JBLOCKROW coef_blocks, - JDIMENSION start_row, JDIMENSION start_col, - JDIMENSION num_blocks)); - -struct jpeg_forward_dct { - JMETHOD(void, start_pass, (j_compress_ptr cinfo)); - /* It is useful to allow each component to have a separate FDCT method. */ - forward_DCT_ptr forward_DCT[MAX_COMPONENTS]; -}; - -/* Entropy encoding */ -struct jpeg_entropy_encoder { - JMETHOD(void, start_pass, (j_compress_ptr cinfo, boolean gather_statistics)); - JMETHOD(boolean, encode_mcu, (j_compress_ptr cinfo, JBLOCKROW *MCU_data)); - JMETHOD(void, finish_pass, (j_compress_ptr cinfo)); -}; - -/* Marker writing */ -struct jpeg_marker_writer { - JMETHOD(void, write_file_header, (j_compress_ptr cinfo)); - JMETHOD(void, write_frame_header, (j_compress_ptr cinfo)); - JMETHOD(void, write_scan_header, (j_compress_ptr cinfo)); - JMETHOD(void, write_file_trailer, (j_compress_ptr cinfo)); - JMETHOD(void, write_tables_only, (j_compress_ptr cinfo)); - /* These routines are exported to allow insertion of extra markers */ - /* Probably only COM and APPn markers should be written this way */ - JMETHOD(void, write_marker_header, (j_compress_ptr cinfo, int marker, - unsigned int datalen)); - JMETHOD(void, write_marker_byte, (j_compress_ptr cinfo, int val)); -}; - - -/* Declarations for decompression modules */ - -/* Master control module */ -struct jpeg_decomp_master { - JMETHOD(void, prepare_for_output_pass, (j_decompress_ptr cinfo)); - JMETHOD(void, finish_output_pass, (j_decompress_ptr cinfo)); - - /* State variables made visible to other modules */ - boolean is_dummy_pass; /* True during 1st pass for 2-pass quant */ -}; - -/* Input control module */ -struct jpeg_input_controller { - JMETHOD(int, consume_input, (j_decompress_ptr cinfo)); - JMETHOD(void, reset_input_controller, (j_decompress_ptr cinfo)); - JMETHOD(void, start_input_pass, (j_decompress_ptr cinfo)); - JMETHOD(void, finish_input_pass, (j_decompress_ptr cinfo)); - - /* State variables made visible to other modules */ - boolean has_multiple_scans; /* True if file has multiple scans */ - boolean eoi_reached; /* True when EOI has been consumed */ -}; - -/* Main buffer control (downsampled-data buffer) */ -struct jpeg_d_main_controller { - JMETHOD(void, start_pass, (j_decompress_ptr cinfo, J_BUF_MODE pass_mode)); - JMETHOD(void, process_data, (j_decompress_ptr cinfo, - JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, - JDIMENSION out_rows_avail)); -}; - -/* Coefficient buffer control */ -struct jpeg_d_coef_controller { - JMETHOD(void, start_input_pass, (j_decompress_ptr cinfo)); - JMETHOD(int, consume_data, (j_decompress_ptr cinfo)); - JMETHOD(void, start_output_pass, (j_decompress_ptr cinfo)); - JMETHOD(int, decompress_data, (j_decompress_ptr cinfo, - JSAMPIMAGE output_buf)); - /* Pointer to array of coefficient virtual arrays, or NULL if none */ - jvirt_barray_ptr *coef_arrays; -}; - -/* Decompression postprocessing (color quantization buffer control) */ -struct jpeg_d_post_controller { - JMETHOD(void, start_pass, (j_decompress_ptr cinfo, J_BUF_MODE pass_mode)); - JMETHOD(void, post_process_data, (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, - JDIMENSION *in_row_group_ctr, - JDIMENSION in_row_groups_avail, - JSAMPARRAY output_buf, - JDIMENSION *out_row_ctr, - JDIMENSION out_rows_avail)); -}; - -/* Marker reading & parsing */ -struct jpeg_marker_reader { - JMETHOD(void, reset_marker_reader, (j_decompress_ptr cinfo)); - /* Read markers until SOS or EOI. - * Returns same codes as are defined for jpeg_consume_input: - * JPEG_SUSPENDED, JPEG_REACHED_SOS, or JPEG_REACHED_EOI. - */ - JMETHOD(int, read_markers, (j_decompress_ptr cinfo)); - /* Read a restart marker --- exported for use by entropy decoder only */ - jpeg_marker_parser_method read_restart_marker; - - /* State of marker reader --- nominally internal, but applications - * supplying COM or APPn handlers might like to know the state. - */ - boolean saw_SOI; /* found SOI? */ - boolean saw_SOF; /* found SOF? */ - int next_restart_num; /* next restart number expected (0-7) */ - unsigned int discarded_bytes; /* # of bytes skipped looking for a marker */ -}; - -/* Entropy decoding */ -struct jpeg_entropy_decoder { - JMETHOD(void, start_pass, (j_decompress_ptr cinfo)); - JMETHOD(boolean, decode_mcu, (j_decompress_ptr cinfo, - JBLOCKROW *MCU_data)); -}; - -/* Inverse DCT (also performs dequantization) */ -typedef JMETHOD(void, inverse_DCT_method_ptr, - (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, - JSAMPARRAY output_buf, JDIMENSION output_col)); - -struct jpeg_inverse_dct { - JMETHOD(void, start_pass, (j_decompress_ptr cinfo)); - /* It is useful to allow each component to have a separate IDCT method. */ - inverse_DCT_method_ptr inverse_DCT[MAX_COMPONENTS]; -}; - -/* Upsampling (note that upsampler must also call color converter) */ -struct jpeg_upsampler { - JMETHOD(void, start_pass, (j_decompress_ptr cinfo)); - JMETHOD(void, upsample, (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, - JDIMENSION *in_row_group_ctr, - JDIMENSION in_row_groups_avail, - JSAMPARRAY output_buf, - JDIMENSION *out_row_ctr, - JDIMENSION out_rows_avail)); - - boolean need_context_rows; /* TRUE if need rows above & below */ -}; - -/* Colorspace conversion */ -struct jpeg_color_deconverter { - JMETHOD(void, start_pass, (j_decompress_ptr cinfo)); - JMETHOD(void, color_convert, (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION input_row, - JSAMPARRAY output_buf, int num_rows)); -}; - -/* Color quantization or color precision reduction */ -struct jpeg_color_quantizer { - JMETHOD(void, start_pass, (j_decompress_ptr cinfo, boolean is_pre_scan)); - JMETHOD(void, color_quantize, (j_decompress_ptr cinfo, - JSAMPARRAY input_buf, JSAMPARRAY output_buf, - int num_rows)); - JMETHOD(void, finish_pass, (j_decompress_ptr cinfo)); - JMETHOD(void, new_color_map, (j_decompress_ptr cinfo)); -}; - - -/* Miscellaneous useful macros */ - -#undef MAX -#define MAX(a,b) ((a) > (b) ? (a) : (b)) -#undef MIN -#define MIN(a,b) ((a) < (b) ? (a) : (b)) - - -/* We assume that right shift corresponds to signed division by 2 with - * rounding towards minus infinity. This is correct for typical "arithmetic - * shift" instructions that shift in copies of the sign bit. But some - * C compilers implement >> with an unsigned shift. For these machines you - * must define RIGHT_SHIFT_IS_UNSIGNED. - * RIGHT_SHIFT provides a proper signed right shift of an INT32 quantity. - * It is only applied with constant shift counts. SHIFT_TEMPS must be - * included in the variables of any routine using RIGHT_SHIFT. - */ - -#ifdef RIGHT_SHIFT_IS_UNSIGNED -#define SHIFT_TEMPS INT32 shift_temp; -#define RIGHT_SHIFT(x,shft) \ - ((shift_temp = (x)) < 0 ? \ - (shift_temp >> (shft)) | ((~((INT32) 0)) << (32-(shft))) : \ - (shift_temp >> (shft))) -#else -#define SHIFT_TEMPS -#define RIGHT_SHIFT(x,shft) ((x) >> (shft)) -#endif - - -/* Short forms of external names for systems with brain-damaged linkers. */ - -#ifdef NEED_SHORT_EXTERNAL_NAMES -#define jinit_compress_master jICompress -#define jinit_c_master_control jICMaster -#define jinit_c_main_controller jICMainC -#define jinit_c_prep_controller jICPrepC -#define jinit_c_coef_controller jICCoefC -#define jinit_color_converter jICColor -#define jinit_downsampler jIDownsampler -#define jinit_forward_dct jIFDCT -#define jinit_huff_encoder jIHEncoder -#define jinit_arith_encoder jIAEncoder -#define jinit_marker_writer jIMWriter -#define jinit_master_decompress jIDMaster -#define jinit_d_main_controller jIDMainC -#define jinit_d_coef_controller jIDCoefC -#define jinit_d_post_controller jIDPostC -#define jinit_input_controller jIInCtlr -#define jinit_marker_reader jIMReader -#define jinit_huff_decoder jIHDecoder -#define jinit_arith_decoder jIADecoder -#define jinit_inverse_dct jIIDCT -#define jinit_upsampler jIUpsampler -#define jinit_color_deconverter jIDColor -#define jinit_1pass_quantizer jI1Quant -#define jinit_2pass_quantizer jI2Quant -#define jinit_merged_upsampler jIMUpsampler -#define jinit_memory_mgr jIMemMgr -#define jdiv_round_up jDivRound -#define jround_up jRound -#define jzero_far jZeroFar -#define jcopy_sample_rows jCopySamples -#define jcopy_block_row jCopyBlocks -#define jpeg_zigzag_order jZIGTable -#define jpeg_natural_order jZAGTable -#define jpeg_natural_order7 jZAG7Table -#define jpeg_natural_order6 jZAG6Table -#define jpeg_natural_order5 jZAG5Table -#define jpeg_natural_order4 jZAG4Table -#define jpeg_natural_order3 jZAG3Table -#define jpeg_natural_order2 jZAG2Table -#define jpeg_aritab jAriTab -#endif /* NEED_SHORT_EXTERNAL_NAMES */ - - -/* On normal machines we can apply MEMCOPY() and MEMZERO() to sample arrays - * and coefficient-block arrays. This won't work on 80x86 because the arrays - * are FAR and we're assuming a small-pointer memory model. However, some - * DOS compilers provide far-pointer versions of memcpy() and memset() even - * in the small-model libraries. These will be used if USE_FMEM is defined. - * Otherwise, the routines in jutils.c do it the hard way. - */ - -#ifndef NEED_FAR_POINTERS /* normal case, same as regular macro */ -#define FMEMZERO(target,size) MEMZERO(target,size) -#else /* 80x86 case */ -#ifdef USE_FMEM -#define FMEMZERO(target,size) _fmemset((void FAR *)(target), 0, (size_t)(size)) -#else -EXTERN(void) jzero_far JPP((void FAR * target, size_t bytestozero)); -#define FMEMZERO(target,size) jzero_far(target, size) -#endif -#endif - - -/* Compression module initialization routines */ -EXTERN(void) jinit_compress_master JPP((j_compress_ptr cinfo)); -EXTERN(void) jinit_c_master_control JPP((j_compress_ptr cinfo, - boolean transcode_only)); -EXTERN(void) jinit_c_main_controller JPP((j_compress_ptr cinfo, - boolean need_full_buffer)); -EXTERN(void) jinit_c_prep_controller JPP((j_compress_ptr cinfo, - boolean need_full_buffer)); -EXTERN(void) jinit_c_coef_controller JPP((j_compress_ptr cinfo, - boolean need_full_buffer)); -EXTERN(void) jinit_color_converter JPP((j_compress_ptr cinfo)); -EXTERN(void) jinit_downsampler JPP((j_compress_ptr cinfo)); -EXTERN(void) jinit_forward_dct JPP((j_compress_ptr cinfo)); -EXTERN(void) jinit_huff_encoder JPP((j_compress_ptr cinfo)); -EXTERN(void) jinit_arith_encoder JPP((j_compress_ptr cinfo)); -EXTERN(void) jinit_marker_writer JPP((j_compress_ptr cinfo)); -/* Decompression module initialization routines */ -EXTERN(void) jinit_master_decompress JPP((j_decompress_ptr cinfo)); -EXTERN(void) jinit_d_main_controller JPP((j_decompress_ptr cinfo, - boolean need_full_buffer)); -EXTERN(void) jinit_d_coef_controller JPP((j_decompress_ptr cinfo, - boolean need_full_buffer)); -EXTERN(void) jinit_d_post_controller JPP((j_decompress_ptr cinfo, - boolean need_full_buffer)); -EXTERN(void) jinit_input_controller JPP((j_decompress_ptr cinfo)); -EXTERN(void) jinit_marker_reader JPP((j_decompress_ptr cinfo)); -EXTERN(void) jinit_huff_decoder JPP((j_decompress_ptr cinfo)); -EXTERN(void) jinit_arith_decoder JPP((j_decompress_ptr cinfo)); -EXTERN(void) jinit_inverse_dct JPP((j_decompress_ptr cinfo)); -EXTERN(void) jinit_upsampler JPP((j_decompress_ptr cinfo)); -EXTERN(void) jinit_color_deconverter JPP((j_decompress_ptr cinfo)); -EXTERN(void) jinit_1pass_quantizer JPP((j_decompress_ptr cinfo)); -EXTERN(void) jinit_2pass_quantizer JPP((j_decompress_ptr cinfo)); -EXTERN(void) jinit_merged_upsampler JPP((j_decompress_ptr cinfo)); -/* Memory manager initialization */ -EXTERN(void) jinit_memory_mgr JPP((j_common_ptr cinfo)); - -/* Utility routines in jutils.c */ -EXTERN(long) jdiv_round_up JPP((long a, long b)); -EXTERN(long) jround_up JPP((long a, long b)); -EXTERN(void) jcopy_sample_rows JPP((JSAMPARRAY input_array, int source_row, - JSAMPARRAY output_array, int dest_row, - int num_rows, JDIMENSION num_cols)); -EXTERN(void) jcopy_block_row JPP((JBLOCKROW input_row, JBLOCKROW output_row, - JDIMENSION num_blocks)); -/* Constant tables in jutils.c */ -#if 0 /* This table is not actually needed in v6a */ -extern const int jpeg_zigzag_order[]; /* natural coef order to zigzag order */ -#endif -extern const int jpeg_natural_order[]; /* zigzag coef order to natural order */ -extern const int jpeg_natural_order7[]; /* zz to natural order for 7x7 block */ -extern const int jpeg_natural_order6[]; /* zz to natural order for 6x6 block */ -extern const int jpeg_natural_order5[]; /* zz to natural order for 5x5 block */ -extern const int jpeg_natural_order4[]; /* zz to natural order for 4x4 block */ -extern const int jpeg_natural_order3[]; /* zz to natural order for 3x3 block */ -extern const int jpeg_natural_order2[]; /* zz to natural order for 2x2 block */ - -/* Arithmetic coding probability estimation tables in jaricom.c */ -extern const INT32 jpeg_aritab[]; - -/* Suppress undefined-structure complaints if necessary. */ - -#ifdef INCOMPLETE_TYPES_BROKEN -#ifndef AM_MEMORY_MANAGER /* only jmemmgr.c defines these */ -struct jvirt_sarray_control { long dummy; }; -struct jvirt_barray_control { long dummy; }; -#endif -#endif /* INCOMPLETE_TYPES_BROKEN */ diff --git a/jpeg/jpeglib.h b/jpeg/jpeglib.h deleted file mode 100755 index 1327cff..0000000 --- a/jpeg/jpeglib.h +++ /dev/null @@ -1,1160 +0,0 @@ -/* - * jpeglib.h - * - * Copyright (C) 1991-1998, Thomas G. Lane. - * Modified 2002-2011 by Guido Vollbeding. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file defines the application interface for the JPEG library. - * Most applications using the library need only include this file, - * and perhaps jerror.h if they want to know the exact error codes. - */ - -#ifndef JPEGLIB_H -#define JPEGLIB_H - -/* - * First we include the configuration files that record how this - * installation of the JPEG library is set up. jconfig.h can be - * generated automatically for many systems. jmorecfg.h contains - * manual configuration options that most people need not worry about. - */ - -#ifndef JCONFIG_INCLUDED /* in case jinclude.h already did */ -#include "jconfig.h" /* widely used configuration options */ -#endif -#include "jmorecfg.h" /* seldom changed options */ - - -#ifdef __cplusplus -#ifndef DONT_USE_EXTERN_C -extern "C" { -#endif -#endif - -/* Version IDs for the JPEG library. - * Might be useful for tests like "#if JPEG_LIB_VERSION >= 80". - */ - -#define JPEG_LIB_VERSION 80 /* Compatibility version 8.0 */ -#define JPEG_LIB_VERSION_MAJOR 8 -#define JPEG_LIB_VERSION_MINOR 4 - - -/* Various constants determining the sizes of things. - * All of these are specified by the JPEG standard, so don't change them - * if you want to be compatible. - */ - -#define DCTSIZE 8 /* The basic DCT block is 8x8 coefficients */ -#define DCTSIZE2 64 /* DCTSIZE squared; # of elements in a block */ -#define NUM_QUANT_TBLS 4 /* Quantization tables are numbered 0..3 */ -#define NUM_HUFF_TBLS 4 /* Huffman tables are numbered 0..3 */ -#define NUM_ARITH_TBLS 16 /* Arith-coding tables are numbered 0..15 */ -#define MAX_COMPS_IN_SCAN 4 /* JPEG limit on # of components in one scan */ -#define MAX_SAMP_FACTOR 4 /* JPEG limit on sampling factors */ -/* Unfortunately, some bozo at Adobe saw no reason to be bound by the standard; - * the PostScript DCT filter can emit files with many more than 10 blocks/MCU. - * If you happen to run across such a file, you can up D_MAX_BLOCKS_IN_MCU - * to handle it. We even let you do this from the jconfig.h file. However, - * we strongly discourage changing C_MAX_BLOCKS_IN_MCU; just because Adobe - * sometimes emits noncompliant files doesn't mean you should too. - */ -#define C_MAX_BLOCKS_IN_MCU 10 /* compressor's limit on blocks per MCU */ -#ifndef D_MAX_BLOCKS_IN_MCU -#define D_MAX_BLOCKS_IN_MCU 10 /* decompressor's limit on blocks per MCU */ -#endif - - -/* Data structures for images (arrays of samples and of DCT coefficients). - * On 80x86 machines, the image arrays are too big for near pointers, - * but the pointer arrays can fit in near memory. - */ - -typedef JSAMPLE FAR *JSAMPROW; /* ptr to one image row of pixel samples. */ -typedef JSAMPROW *JSAMPARRAY; /* ptr to some rows (a 2-D sample array) */ -typedef JSAMPARRAY *JSAMPIMAGE; /* a 3-D sample array: top index is color */ - -typedef JCOEF JBLOCK[DCTSIZE2]; /* one block of coefficients */ -typedef JBLOCK FAR *JBLOCKROW; /* pointer to one row of coefficient blocks */ -typedef JBLOCKROW *JBLOCKARRAY; /* a 2-D array of coefficient blocks */ -typedef JBLOCKARRAY *JBLOCKIMAGE; /* a 3-D array of coefficient blocks */ - -typedef JCOEF FAR *JCOEFPTR; /* useful in a couple of places */ - - -/* Types for JPEG compression parameters and working tables. */ - - -/* DCT coefficient quantization tables. */ - -typedef struct { - /* This array gives the coefficient quantizers in natural array order - * (not the zigzag order in which they are stored in a JPEG DQT marker). - * CAUTION: IJG versions prior to v6a kept this array in zigzag order. - */ - UINT16 quantval[DCTSIZE2]; /* quantization step for each coefficient */ - /* This field is used only during compression. It's initialized FALSE when - * the table is created, and set TRUE when it's been output to the file. - * You could suppress output of a table by setting this to TRUE. - * (See jpeg_suppress_tables for an example.) - */ - boolean sent_table; /* TRUE when table has been output */ -} JQUANT_TBL; - - -/* Huffman coding tables. */ - -typedef struct { - /* These two fields directly represent the contents of a JPEG DHT marker */ - UINT8 bits[17]; /* bits[k] = # of symbols with codes of */ - /* length k bits; bits[0] is unused */ - UINT8 huffval[256]; /* The symbols, in order of incr code length */ - /* This field is used only during compression. It's initialized FALSE when - * the table is created, and set TRUE when it's been output to the file. - * You could suppress output of a table by setting this to TRUE. - * (See jpeg_suppress_tables for an example.) - */ - boolean sent_table; /* TRUE when table has been output */ -} JHUFF_TBL; - - -/* Basic info about one component (color channel). */ - -typedef struct { - /* These values are fixed over the whole image. */ - /* For compression, they must be supplied by parameter setup; */ - /* for decompression, they are read from the SOF marker. */ - int component_id; /* identifier for this component (0..255) */ - int component_index; /* its index in SOF or cinfo->comp_info[] */ - int h_samp_factor; /* horizontal sampling factor (1..4) */ - int v_samp_factor; /* vertical sampling factor (1..4) */ - int quant_tbl_no; /* quantization table selector (0..3) */ - /* These values may vary between scans. */ - /* For compression, they must be supplied by parameter setup; */ - /* for decompression, they are read from the SOS marker. */ - /* The decompressor output side may not use these variables. */ - int dc_tbl_no; /* DC entropy table selector (0..3) */ - int ac_tbl_no; /* AC entropy table selector (0..3) */ - - /* Remaining fields should be treated as private by applications. */ - - /* These values are computed during compression or decompression startup: */ - /* Component's size in DCT blocks. - * Any dummy blocks added to complete an MCU are not counted; therefore - * these values do not depend on whether a scan is interleaved or not. - */ - JDIMENSION width_in_blocks; - JDIMENSION height_in_blocks; - /* Size of a DCT block in samples, - * reflecting any scaling we choose to apply during the DCT step. - * Values from 1 to 16 are supported. - * Note that different components may receive different DCT scalings. - */ - int DCT_h_scaled_size; - int DCT_v_scaled_size; - /* The downsampled dimensions are the component's actual, unpadded number - * of samples at the main buffer (preprocessing/compression interface); - * DCT scaling is included, so - * downsampled_width = ceil(image_width * Hi/Hmax * DCT_h_scaled_size/DCTSIZE) - * and similarly for height. - */ - JDIMENSION downsampled_width; /* actual width in samples */ - JDIMENSION downsampled_height; /* actual height in samples */ - /* This flag is used only for decompression. In cases where some of the - * components will be ignored (eg grayscale output from YCbCr image), - * we can skip most computations for the unused components. - */ - boolean component_needed; /* do we need the value of this component? */ - - /* These values are computed before starting a scan of the component. */ - /* The decompressor output side may not use these variables. */ - int MCU_width; /* number of blocks per MCU, horizontally */ - int MCU_height; /* number of blocks per MCU, vertically */ - int MCU_blocks; /* MCU_width * MCU_height */ - int MCU_sample_width; /* MCU width in samples: MCU_width * DCT_h_scaled_size */ - int last_col_width; /* # of non-dummy blocks across in last MCU */ - int last_row_height; /* # of non-dummy blocks down in last MCU */ - - /* Saved quantization table for component; NULL if none yet saved. - * See jdinput.c comments about the need for this information. - * This field is currently used only for decompression. - */ - JQUANT_TBL * quant_table; - - /* Private per-component storage for DCT or IDCT subsystem. */ - void * dct_table; -} jpeg_component_info; - - -/* The script for encoding a multiple-scan file is an array of these: */ - -typedef struct { - int comps_in_scan; /* number of components encoded in this scan */ - int component_index[MAX_COMPS_IN_SCAN]; /* their SOF/comp_info[] indexes */ - int Ss, Se; /* progressive JPEG spectral selection parms */ - int Ah, Al; /* progressive JPEG successive approx. parms */ -} jpeg_scan_info; - -/* The decompressor can save APPn and COM markers in a list of these: */ - -typedef struct jpeg_marker_struct FAR * jpeg_saved_marker_ptr; - -struct jpeg_marker_struct { - jpeg_saved_marker_ptr next; /* next in list, or NULL */ - UINT8 marker; /* marker code: JPEG_COM, or JPEG_APP0+n */ - unsigned int original_length; /* # bytes of data in the file */ - unsigned int data_length; /* # bytes of data saved at data[] */ - JOCTET FAR * data; /* the data contained in the marker */ - /* the marker length word is not counted in data_length or original_length */ -}; - -/* Known color spaces. */ - -typedef enum { - JCS_UNKNOWN, /* error/unspecified */ - JCS_GRAYSCALE, /* monochrome */ - JCS_RGB, /* red/green/blue */ - JCS_YCbCr, /* Y/Cb/Cr (also known as YUV) */ - JCS_CMYK, /* C/M/Y/K */ - JCS_YCCK /* Y/Cb/Cr/K */ -} J_COLOR_SPACE; - -/* DCT/IDCT algorithm options. */ - -typedef enum { - JDCT_ISLOW, /* slow but accurate integer algorithm */ - JDCT_IFAST, /* faster, less accurate integer method */ - JDCT_FLOAT /* floating-point: accurate, fast on fast HW */ -} J_DCT_METHOD; - -#ifndef JDCT_DEFAULT /* may be overridden in jconfig.h */ -#define JDCT_DEFAULT JDCT_ISLOW -#endif -#ifndef JDCT_FASTEST /* may be overridden in jconfig.h */ -#define JDCT_FASTEST JDCT_IFAST -#endif - -/* Dithering options for decompression. */ - -typedef enum { - JDITHER_NONE, /* no dithering */ - JDITHER_ORDERED, /* simple ordered dither */ - JDITHER_FS /* Floyd-Steinberg error diffusion dither */ -} J_DITHER_MODE; - - -/* Common fields between JPEG compression and decompression master structs. */ - -#define jpeg_common_fields \ - struct jpeg_error_mgr * err; /* Error handler module */\ - struct jpeg_memory_mgr * mem; /* Memory manager module */\ - struct jpeg_progress_mgr * progress; /* Progress monitor, or NULL if none */\ - void * client_data; /* Available for use by application */\ - boolean is_decompressor; /* So common code can tell which is which */\ - int global_state /* For checking call sequence validity */ - -/* Routines that are to be used by both halves of the library are declared - * to receive a pointer to this structure. There are no actual instances of - * jpeg_common_struct, only of jpeg_compress_struct and jpeg_decompress_struct. - */ -struct jpeg_common_struct { - jpeg_common_fields; /* Fields common to both master struct types */ - /* Additional fields follow in an actual jpeg_compress_struct or - * jpeg_decompress_struct. All three structs must agree on these - * initial fields! (This would be a lot cleaner in C++.) - */ -}; - -typedef struct jpeg_common_struct * j_common_ptr; -typedef struct jpeg_compress_struct * j_compress_ptr; -typedef struct jpeg_decompress_struct * j_decompress_ptr; - - -/* Master record for a compression instance */ - -struct jpeg_compress_struct { - jpeg_common_fields; /* Fields shared with jpeg_decompress_struct */ - - /* Destination for compressed data */ - struct jpeg_destination_mgr * dest; - - /* Description of source image --- these fields must be filled in by - * outer application before starting compression. in_color_space must - * be correct before you can even call jpeg_set_defaults(). - */ - - JDIMENSION image_width; /* input image width */ - JDIMENSION image_height; /* input image height */ - int input_components; /* # of color components in input image */ - J_COLOR_SPACE in_color_space; /* colorspace of input image */ - - double input_gamma; /* image gamma of input image */ - - /* Compression parameters --- these fields must be set before calling - * jpeg_start_compress(). We recommend calling jpeg_set_defaults() to - * initialize everything to reasonable defaults, then changing anything - * the application specifically wants to change. That way you won't get - * burnt when new parameters are added. Also note that there are several - * helper routines to simplify changing parameters. - */ - - unsigned int scale_num, scale_denom; /* fraction by which to scale image */ - - JDIMENSION jpeg_width; /* scaled JPEG image width */ - JDIMENSION jpeg_height; /* scaled JPEG image height */ - /* Dimensions of actual JPEG image that will be written to file, - * derived from input dimensions by scaling factors above. - * These fields are computed by jpeg_start_compress(). - * You can also use jpeg_calc_jpeg_dimensions() to determine these values - * in advance of calling jpeg_start_compress(). - */ - - int data_precision; /* bits of precision in image data */ - - int num_components; /* # of color components in JPEG image */ - J_COLOR_SPACE jpeg_color_space; /* colorspace of JPEG image */ - - jpeg_component_info * comp_info; - /* comp_info[i] describes component that appears i'th in SOF */ - - JQUANT_TBL * quant_tbl_ptrs[NUM_QUANT_TBLS]; - int q_scale_factor[NUM_QUANT_TBLS]; - /* ptrs to coefficient quantization tables, or NULL if not defined, - * and corresponding scale factors (percentage, initialized 100). - */ - - JHUFF_TBL * dc_huff_tbl_ptrs[NUM_HUFF_TBLS]; - JHUFF_TBL * ac_huff_tbl_ptrs[NUM_HUFF_TBLS]; - /* ptrs to Huffman coding tables, or NULL if not defined */ - - UINT8 arith_dc_L[NUM_ARITH_TBLS]; /* L values for DC arith-coding tables */ - UINT8 arith_dc_U[NUM_ARITH_TBLS]; /* U values for DC arith-coding tables */ - UINT8 arith_ac_K[NUM_ARITH_TBLS]; /* Kx values for AC arith-coding tables */ - - int num_scans; /* # of entries in scan_info array */ - const jpeg_scan_info * scan_info; /* script for multi-scan file, or NULL */ - /* The default value of scan_info is NULL, which causes a single-scan - * sequential JPEG file to be emitted. To create a multi-scan file, - * set num_scans and scan_info to point to an array of scan definitions. - */ - - boolean raw_data_in; /* TRUE=caller supplies downsampled data */ - boolean arith_code; /* TRUE=arithmetic coding, FALSE=Huffman */ - boolean optimize_coding; /* TRUE=optimize entropy encoding parms */ - boolean CCIR601_sampling; /* TRUE=first samples are cosited */ - boolean do_fancy_downsampling; /* TRUE=apply fancy downsampling */ - int smoothing_factor; /* 1..100, or 0 for no input smoothing */ - J_DCT_METHOD dct_method; /* DCT algorithm selector */ - - /* The restart interval can be specified in absolute MCUs by setting - * restart_interval, or in MCU rows by setting restart_in_rows - * (in which case the correct restart_interval will be figured - * for each scan). - */ - unsigned int restart_interval; /* MCUs per restart, or 0 for no restart */ - int restart_in_rows; /* if > 0, MCU rows per restart interval */ - - /* Parameters controlling emission of special markers. */ - - boolean write_JFIF_header; /* should a JFIF marker be written? */ - UINT8 JFIF_major_version; /* What to write for the JFIF version number */ - UINT8 JFIF_minor_version; - /* These three values are not used by the JPEG code, merely copied */ - /* into the JFIF APP0 marker. density_unit can be 0 for unknown, */ - /* 1 for dots/inch, or 2 for dots/cm. Note that the pixel aspect */ - /* ratio is defined by X_density/Y_density even when density_unit=0. */ - UINT8 density_unit; /* JFIF code for pixel size units */ - UINT16 X_density; /* Horizontal pixel density */ - UINT16 Y_density; /* Vertical pixel density */ - boolean write_Adobe_marker; /* should an Adobe marker be written? */ - - /* State variable: index of next scanline to be written to - * jpeg_write_scanlines(). Application may use this to control its - * processing loop, e.g., "while (next_scanline < image_height)". - */ - - JDIMENSION next_scanline; /* 0 .. image_height-1 */ - - /* Remaining fields are known throughout compressor, but generally - * should not be touched by a surrounding application. - */ - - /* - * These fields are computed during compression startup - */ - boolean progressive_mode; /* TRUE if scan script uses progressive mode */ - int max_h_samp_factor; /* largest h_samp_factor */ - int max_v_samp_factor; /* largest v_samp_factor */ - - int min_DCT_h_scaled_size; /* smallest DCT_h_scaled_size of any component */ - int min_DCT_v_scaled_size; /* smallest DCT_v_scaled_size of any component */ - - JDIMENSION total_iMCU_rows; /* # of iMCU rows to be input to coef ctlr */ - /* The coefficient controller receives data in units of MCU rows as defined - * for fully interleaved scans (whether the JPEG file is interleaved or not). - * There are v_samp_factor * DCTSIZE sample rows of each component in an - * "iMCU" (interleaved MCU) row. - */ - - /* - * These fields are valid during any one scan. - * They describe the components and MCUs actually appearing in the scan. - */ - int comps_in_scan; /* # of JPEG components in this scan */ - jpeg_component_info * cur_comp_info[MAX_COMPS_IN_SCAN]; - /* *cur_comp_info[i] describes component that appears i'th in SOS */ - - JDIMENSION MCUs_per_row; /* # of MCUs across the image */ - JDIMENSION MCU_rows_in_scan; /* # of MCU rows in the image */ - - int blocks_in_MCU; /* # of DCT blocks per MCU */ - int MCU_membership[C_MAX_BLOCKS_IN_MCU]; - /* MCU_membership[i] is index in cur_comp_info of component owning */ - /* i'th block in an MCU */ - - int Ss, Se, Ah, Al; /* progressive JPEG parameters for scan */ - - int block_size; /* the basic DCT block size: 1..16 */ - const int * natural_order; /* natural-order position array */ - int lim_Se; /* min( Se, DCTSIZE2-1 ) */ - - /* - * Links to compression subobjects (methods and private variables of modules) - */ - struct jpeg_comp_master * master; - struct jpeg_c_main_controller * main; - struct jpeg_c_prep_controller * prep; - struct jpeg_c_coef_controller * coef; - struct jpeg_marker_writer * marker; - struct jpeg_color_converter * cconvert; - struct jpeg_downsampler * downsample; - struct jpeg_forward_dct * fdct; - struct jpeg_entropy_encoder * entropy; - jpeg_scan_info * script_space; /* workspace for jpeg_simple_progression */ - int script_space_size; -}; - - -/* Master record for a decompression instance */ - -struct jpeg_decompress_struct { - jpeg_common_fields; /* Fields shared with jpeg_compress_struct */ - - /* Source of compressed data */ - struct jpeg_source_mgr * src; - - /* Basic description of image --- filled in by jpeg_read_header(). */ - /* Application may inspect these values to decide how to process image. */ - - JDIMENSION image_width; /* nominal image width (from SOF marker) */ - JDIMENSION image_height; /* nominal image height */ - int num_components; /* # of color components in JPEG image */ - J_COLOR_SPACE jpeg_color_space; /* colorspace of JPEG image */ - - /* Decompression processing parameters --- these fields must be set before - * calling jpeg_start_decompress(). Note that jpeg_read_header() initializes - * them to default values. - */ - - J_COLOR_SPACE out_color_space; /* colorspace for output */ - - unsigned int scale_num, scale_denom; /* fraction by which to scale image */ - - double output_gamma; /* image gamma wanted in output */ - - boolean buffered_image; /* TRUE=multiple output passes */ - boolean raw_data_out; /* TRUE=downsampled data wanted */ - - J_DCT_METHOD dct_method; /* IDCT algorithm selector */ - boolean do_fancy_upsampling; /* TRUE=apply fancy upsampling */ - boolean do_block_smoothing; /* TRUE=apply interblock smoothing */ - - boolean quantize_colors; /* TRUE=colormapped output wanted */ - /* the following are ignored if not quantize_colors: */ - J_DITHER_MODE dither_mode; /* type of color dithering to use */ - boolean two_pass_quantize; /* TRUE=use two-pass color quantization */ - int desired_number_of_colors; /* max # colors to use in created colormap */ - /* these are significant only in buffered-image mode: */ - boolean enable_1pass_quant; /* enable future use of 1-pass quantizer */ - boolean enable_external_quant;/* enable future use of external colormap */ - boolean enable_2pass_quant; /* enable future use of 2-pass quantizer */ - - /* Description of actual output image that will be returned to application. - * These fields are computed by jpeg_start_decompress(). - * You can also use jpeg_calc_output_dimensions() to determine these values - * in advance of calling jpeg_start_decompress(). - */ - - JDIMENSION output_width; /* scaled image width */ - JDIMENSION output_height; /* scaled image height */ - int out_color_components; /* # of color components in out_color_space */ - int output_components; /* # of color components returned */ - /* output_components is 1 (a colormap index) when quantizing colors; - * otherwise it equals out_color_components. - */ - int rec_outbuf_height; /* min recommended height of scanline buffer */ - /* If the buffer passed to jpeg_read_scanlines() is less than this many rows - * high, space and time will be wasted due to unnecessary data copying. - * Usually rec_outbuf_height will be 1 or 2, at most 4. - */ - - /* When quantizing colors, the output colormap is described by these fields. - * The application can supply a colormap by setting colormap non-NULL before - * calling jpeg_start_decompress; otherwise a colormap is created during - * jpeg_start_decompress or jpeg_start_output. - * The map has out_color_components rows and actual_number_of_colors columns. - */ - int actual_number_of_colors; /* number of entries in use */ - JSAMPARRAY colormap; /* The color map as a 2-D pixel array */ - - /* State variables: these variables indicate the progress of decompression. - * The application may examine these but must not modify them. - */ - - /* Row index of next scanline to be read from jpeg_read_scanlines(). - * Application may use this to control its processing loop, e.g., - * "while (output_scanline < output_height)". - */ - JDIMENSION output_scanline; /* 0 .. output_height-1 */ - - /* Current input scan number and number of iMCU rows completed in scan. - * These indicate the progress of the decompressor input side. - */ - int input_scan_number; /* Number of SOS markers seen so far */ - JDIMENSION input_iMCU_row; /* Number of iMCU rows completed */ - - /* The "output scan number" is the notional scan being displayed by the - * output side. The decompressor will not allow output scan/row number - * to get ahead of input scan/row, but it can fall arbitrarily far behind. - */ - int output_scan_number; /* Nominal scan number being displayed */ - JDIMENSION output_iMCU_row; /* Number of iMCU rows read */ - - /* Current progression status. coef_bits[c][i] indicates the precision - * with which component c's DCT coefficient i (in zigzag order) is known. - * It is -1 when no data has yet been received, otherwise it is the point - * transform (shift) value for the most recent scan of the coefficient - * (thus, 0 at completion of the progression). - * This pointer is NULL when reading a non-progressive file. - */ - int (*coef_bits)[DCTSIZE2]; /* -1 or current Al value for each coef */ - - /* Internal JPEG parameters --- the application usually need not look at - * these fields. Note that the decompressor output side may not use - * any parameters that can change between scans. - */ - - /* Quantization and Huffman tables are carried forward across input - * datastreams when processing abbreviated JPEG datastreams. - */ - - JQUANT_TBL * quant_tbl_ptrs[NUM_QUANT_TBLS]; - /* ptrs to coefficient quantization tables, or NULL if not defined */ - - JHUFF_TBL * dc_huff_tbl_ptrs[NUM_HUFF_TBLS]; - JHUFF_TBL * ac_huff_tbl_ptrs[NUM_HUFF_TBLS]; - /* ptrs to Huffman coding tables, or NULL if not defined */ - - /* These parameters are never carried across datastreams, since they - * are given in SOF/SOS markers or defined to be reset by SOI. - */ - - int data_precision; /* bits of precision in image data */ - - jpeg_component_info * comp_info; - /* comp_info[i] describes component that appears i'th in SOF */ - - boolean is_baseline; /* TRUE if Baseline SOF0 encountered */ - boolean progressive_mode; /* TRUE if SOFn specifies progressive mode */ - boolean arith_code; /* TRUE=arithmetic coding, FALSE=Huffman */ - - UINT8 arith_dc_L[NUM_ARITH_TBLS]; /* L values for DC arith-coding tables */ - UINT8 arith_dc_U[NUM_ARITH_TBLS]; /* U values for DC arith-coding tables */ - UINT8 arith_ac_K[NUM_ARITH_TBLS]; /* Kx values for AC arith-coding tables */ - - unsigned int restart_interval; /* MCUs per restart interval, or 0 for no restart */ - - /* These fields record data obtained from optional markers recognized by - * the JPEG library. - */ - boolean saw_JFIF_marker; /* TRUE iff a JFIF APP0 marker was found */ - /* Data copied from JFIF marker; only valid if saw_JFIF_marker is TRUE: */ - UINT8 JFIF_major_version; /* JFIF version number */ - UINT8 JFIF_minor_version; - UINT8 density_unit; /* JFIF code for pixel size units */ - UINT16 X_density; /* Horizontal pixel density */ - UINT16 Y_density; /* Vertical pixel density */ - boolean saw_Adobe_marker; /* TRUE iff an Adobe APP14 marker was found */ - UINT8 Adobe_transform; /* Color transform code from Adobe marker */ - - boolean CCIR601_sampling; /* TRUE=first samples are cosited */ - - /* Aside from the specific data retained from APPn markers known to the - * library, the uninterpreted contents of any or all APPn and COM markers - * can be saved in a list for examination by the application. - */ - jpeg_saved_marker_ptr marker_list; /* Head of list of saved markers */ - - /* Remaining fields are known throughout decompressor, but generally - * should not be touched by a surrounding application. - */ - - /* - * These fields are computed during decompression startup - */ - int max_h_samp_factor; /* largest h_samp_factor */ - int max_v_samp_factor; /* largest v_samp_factor */ - - int min_DCT_h_scaled_size; /* smallest DCT_h_scaled_size of any component */ - int min_DCT_v_scaled_size; /* smallest DCT_v_scaled_size of any component */ - - JDIMENSION total_iMCU_rows; /* # of iMCU rows in image */ - /* The coefficient controller's input and output progress is measured in - * units of "iMCU" (interleaved MCU) rows. These are the same as MCU rows - * in fully interleaved JPEG scans, but are used whether the scan is - * interleaved or not. We define an iMCU row as v_samp_factor DCT block - * rows of each component. Therefore, the IDCT output contains - * v_samp_factor*DCT_v_scaled_size sample rows of a component per iMCU row. - */ - - JSAMPLE * sample_range_limit; /* table for fast range-limiting */ - - /* - * These fields are valid during any one scan. - * They describe the components and MCUs actually appearing in the scan. - * Note that the decompressor output side must not use these fields. - */ - int comps_in_scan; /* # of JPEG components in this scan */ - jpeg_component_info * cur_comp_info[MAX_COMPS_IN_SCAN]; - /* *cur_comp_info[i] describes component that appears i'th in SOS */ - - JDIMENSION MCUs_per_row; /* # of MCUs across the image */ - JDIMENSION MCU_rows_in_scan; /* # of MCU rows in the image */ - - int blocks_in_MCU; /* # of DCT blocks per MCU */ - int MCU_membership[D_MAX_BLOCKS_IN_MCU]; - /* MCU_membership[i] is index in cur_comp_info of component owning */ - /* i'th block in an MCU */ - - int Ss, Se, Ah, Al; /* progressive JPEG parameters for scan */ - - /* These fields are derived from Se of first SOS marker. - */ - int block_size; /* the basic DCT block size: 1..16 */ - const int * natural_order; /* natural-order position array for entropy decode */ - int lim_Se; /* min( Se, DCTSIZE2-1 ) for entropy decode */ - - /* This field is shared between entropy decoder and marker parser. - * It is either zero or the code of a JPEG marker that has been - * read from the data source, but has not yet been processed. - */ - int unread_marker; - - /* - * Links to decompression subobjects (methods, private variables of modules) - */ - struct jpeg_decomp_master * master; - struct jpeg_d_main_controller * main; - struct jpeg_d_coef_controller * coef; - struct jpeg_d_post_controller * post; - struct jpeg_input_controller * inputctl; - struct jpeg_marker_reader * marker; - struct jpeg_entropy_decoder * entropy; - struct jpeg_inverse_dct * idct; - struct jpeg_upsampler * upsample; - struct jpeg_color_deconverter * cconvert; - struct jpeg_color_quantizer * cquantize; -}; - - -/* "Object" declarations for JPEG modules that may be supplied or called - * directly by the surrounding application. - * As with all objects in the JPEG library, these structs only define the - * publicly visible methods and state variables of a module. Additional - * private fields may exist after the public ones. - */ - - -/* Error handler object */ - -struct jpeg_error_mgr { - /* Error exit handler: does not return to caller */ - JMETHOD(void, error_exit, (j_common_ptr cinfo)); - /* Conditionally emit a trace or warning message */ - JMETHOD(void, emit_message, (j_common_ptr cinfo, int msg_level)); - /* Routine that actually outputs a trace or error message */ - JMETHOD(void, output_message, (j_common_ptr cinfo)); - /* Format a message string for the most recent JPEG error or message */ - JMETHOD(void, format_message, (j_common_ptr cinfo, char * buffer)); -#define JMSG_LENGTH_MAX 200 /* recommended size of format_message buffer */ - /* Reset error state variables at start of a new image */ - JMETHOD(void, reset_error_mgr, (j_common_ptr cinfo)); - - /* The message ID code and any parameters are saved here. - * A message can have one string parameter or up to 8 int parameters. - */ - int msg_code; -#define JMSG_STR_PARM_MAX 80 - union { - int i[8]; - char s[JMSG_STR_PARM_MAX]; - } msg_parm; - - /* Standard state variables for error facility */ - - int trace_level; /* max msg_level that will be displayed */ - - /* For recoverable corrupt-data errors, we emit a warning message, - * but keep going unless emit_message chooses to abort. emit_message - * should count warnings in num_warnings. The surrounding application - * can check for bad data by seeing if num_warnings is nonzero at the - * end of processing. - */ - long num_warnings; /* number of corrupt-data warnings */ - - /* These fields point to the table(s) of error message strings. - * An application can change the table pointer to switch to a different - * message list (typically, to change the language in which errors are - * reported). Some applications may wish to add additional error codes - * that will be handled by the JPEG library error mechanism; the second - * table pointer is used for this purpose. - * - * First table includes all errors generated by JPEG library itself. - * Error code 0 is reserved for a "no such error string" message. - */ - const char * const * jpeg_message_table; /* Library errors */ - int last_jpeg_message; /* Table contains strings 0..last_jpeg_message */ - /* Second table can be added by application (see cjpeg/djpeg for example). - * It contains strings numbered first_addon_message..last_addon_message. - */ - const char * const * addon_message_table; /* Non-library errors */ - int first_addon_message; /* code for first string in addon table */ - int last_addon_message; /* code for last string in addon table */ -}; - - -/* Progress monitor object */ - -struct jpeg_progress_mgr { - JMETHOD(void, progress_monitor, (j_common_ptr cinfo)); - - long pass_counter; /* work units completed in this pass */ - long pass_limit; /* total number of work units in this pass */ - int completed_passes; /* passes completed so far */ - int total_passes; /* total number of passes expected */ -}; - - -/* Data destination object for compression */ - -struct jpeg_destination_mgr { - JOCTET * next_output_byte; /* => next byte to write in buffer */ - size_t free_in_buffer; /* # of byte spaces remaining in buffer */ - - JMETHOD(void, init_destination, (j_compress_ptr cinfo)); - JMETHOD(boolean, empty_output_buffer, (j_compress_ptr cinfo)); - JMETHOD(void, term_destination, (j_compress_ptr cinfo)); -}; - - -/* Data source object for decompression */ - -struct jpeg_source_mgr { - const JOCTET * next_input_byte; /* => next byte to read from buffer */ - size_t bytes_in_buffer; /* # of bytes remaining in buffer */ - - JMETHOD(void, init_source, (j_decompress_ptr cinfo)); - JMETHOD(boolean, fill_input_buffer, (j_decompress_ptr cinfo)); - JMETHOD(void, skip_input_data, (j_decompress_ptr cinfo, long num_bytes)); - JMETHOD(boolean, resync_to_restart, (j_decompress_ptr cinfo, int desired)); - JMETHOD(void, term_source, (j_decompress_ptr cinfo)); -}; - - -/* Memory manager object. - * Allocates "small" objects (a few K total), "large" objects (tens of K), - * and "really big" objects (virtual arrays with backing store if needed). - * The memory manager does not allow individual objects to be freed; rather, - * each created object is assigned to a pool, and whole pools can be freed - * at once. This is faster and more convenient than remembering exactly what - * to free, especially where malloc()/free() are not too speedy. - * NB: alloc routines never return NULL. They exit to error_exit if not - * successful. - */ - -#define JPOOL_PERMANENT 0 /* lasts until master record is destroyed */ -#define JPOOL_IMAGE 1 /* lasts until done with image/datastream */ -#define JPOOL_NUMPOOLS 2 - -typedef struct jvirt_sarray_control * jvirt_sarray_ptr; -typedef struct jvirt_barray_control * jvirt_barray_ptr; - - -struct jpeg_memory_mgr { - /* Method pointers */ - JMETHOD(void *, alloc_small, (j_common_ptr cinfo, int pool_id, - size_t sizeofobject)); - JMETHOD(void FAR *, alloc_large, (j_common_ptr cinfo, int pool_id, - size_t sizeofobject)); - JMETHOD(JSAMPARRAY, alloc_sarray, (j_common_ptr cinfo, int pool_id, - JDIMENSION samplesperrow, - JDIMENSION numrows)); - JMETHOD(JBLOCKARRAY, alloc_barray, (j_common_ptr cinfo, int pool_id, - JDIMENSION blocksperrow, - JDIMENSION numrows)); - JMETHOD(jvirt_sarray_ptr, request_virt_sarray, (j_common_ptr cinfo, - int pool_id, - boolean pre_zero, - JDIMENSION samplesperrow, - JDIMENSION numrows, - JDIMENSION maxaccess)); - JMETHOD(jvirt_barray_ptr, request_virt_barray, (j_common_ptr cinfo, - int pool_id, - boolean pre_zero, - JDIMENSION blocksperrow, - JDIMENSION numrows, - JDIMENSION maxaccess)); - JMETHOD(void, realize_virt_arrays, (j_common_ptr cinfo)); - JMETHOD(JSAMPARRAY, access_virt_sarray, (j_common_ptr cinfo, - jvirt_sarray_ptr ptr, - JDIMENSION start_row, - JDIMENSION num_rows, - boolean writable)); - JMETHOD(JBLOCKARRAY, access_virt_barray, (j_common_ptr cinfo, - jvirt_barray_ptr ptr, - JDIMENSION start_row, - JDIMENSION num_rows, - boolean writable)); - JMETHOD(void, free_pool, (j_common_ptr cinfo, int pool_id)); - JMETHOD(void, self_destruct, (j_common_ptr cinfo)); - - /* Limit on memory allocation for this JPEG object. (Note that this is - * merely advisory, not a guaranteed maximum; it only affects the space - * used for virtual-array buffers.) May be changed by outer application - * after creating the JPEG object. - */ - long max_memory_to_use; - - /* Maximum allocation request accepted by alloc_large. */ - long max_alloc_chunk; -}; - - -/* Routine signature for application-supplied marker processing methods. - * Need not pass marker code since it is stored in cinfo->unread_marker. - */ -typedef JMETHOD(boolean, jpeg_marker_parser_method, (j_decompress_ptr cinfo)); - - -/* Declarations for routines called by application. - * The JPP macro hides prototype parameters from compilers that can't cope. - * Note JPP requires double parentheses. - */ - -#ifdef HAVE_PROTOTYPES -#define JPP(arglist) arglist -#else -#define JPP(arglist) () -#endif - - -/* Short forms of external names for systems with brain-damaged linkers. - * We shorten external names to be unique in the first six letters, which - * is good enough for all known systems. - * (If your compiler itself needs names to be unique in less than 15 - * characters, you are out of luck. Get a better compiler.) - */ - -#ifdef NEED_SHORT_EXTERNAL_NAMES -#define jpeg_std_error jStdError -#define jpeg_CreateCompress jCreaCompress -#define jpeg_CreateDecompress jCreaDecompress -#define jpeg_destroy_compress jDestCompress -#define jpeg_destroy_decompress jDestDecompress -#define jpeg_stdio_dest jStdDest -#define jpeg_stdio_src jStdSrc -#define jpeg_mem_dest jMemDest -#define jpeg_mem_src jMemSrc -#define jpeg_set_defaults jSetDefaults -#define jpeg_set_colorspace jSetColorspace -#define jpeg_default_colorspace jDefColorspace -#define jpeg_set_quality jSetQuality -#define jpeg_set_linear_quality jSetLQuality -#define jpeg_default_qtables jDefQTables -#define jpeg_add_quant_table jAddQuantTable -#define jpeg_quality_scaling jQualityScaling -#define jpeg_simple_progression jSimProgress -#define jpeg_suppress_tables jSuppressTables -#define jpeg_alloc_quant_table jAlcQTable -#define jpeg_alloc_huff_table jAlcHTable -#define jpeg_start_compress jStrtCompress -#define jpeg_write_scanlines jWrtScanlines -#define jpeg_finish_compress jFinCompress -#define jpeg_calc_jpeg_dimensions jCjpegDimensions -#define jpeg_write_raw_data jWrtRawData -#define jpeg_write_marker jWrtMarker -#define jpeg_write_m_header jWrtMHeader -#define jpeg_write_m_byte jWrtMByte -#define jpeg_write_tables jWrtTables -#define jpeg_read_header jReadHeader -#define jpeg_start_decompress jStrtDecompress -#define jpeg_read_scanlines jReadScanlines -#define jpeg_finish_decompress jFinDecompress -#define jpeg_read_raw_data jReadRawData -#define jpeg_has_multiple_scans jHasMultScn -#define jpeg_start_output jStrtOutput -#define jpeg_finish_output jFinOutput -#define jpeg_input_complete jInComplete -#define jpeg_new_colormap jNewCMap -#define jpeg_consume_input jConsumeInput -#define jpeg_core_output_dimensions jCoreDimensions -#define jpeg_calc_output_dimensions jCalcDimensions -#define jpeg_save_markers jSaveMarkers -#define jpeg_set_marker_processor jSetMarker -#define jpeg_read_coefficients jReadCoefs -#define jpeg_write_coefficients jWrtCoefs -#define jpeg_copy_critical_parameters jCopyCrit -#define jpeg_abort_compress jAbrtCompress -#define jpeg_abort_decompress jAbrtDecompress -#define jpeg_abort jAbort -#define jpeg_destroy jDestroy -#define jpeg_resync_to_restart jResyncRestart -#endif /* NEED_SHORT_EXTERNAL_NAMES */ - - -/* Default error-management setup */ -EXTERN(struct jpeg_error_mgr *) jpeg_std_error - JPP((struct jpeg_error_mgr * err)); - -/* Initialization of JPEG compression objects. - * jpeg_create_compress() and jpeg_create_decompress() are the exported - * names that applications should call. These expand to calls on - * jpeg_CreateCompress and jpeg_CreateDecompress with additional information - * passed for version mismatch checking. - * NB: you must set up the error-manager BEFORE calling jpeg_create_xxx. - */ -#define jpeg_create_compress(cinfo) \ - jpeg_CreateCompress((cinfo), JPEG_LIB_VERSION, \ - (size_t) sizeof(struct jpeg_compress_struct)) -#define jpeg_create_decompress(cinfo) \ - jpeg_CreateDecompress((cinfo), JPEG_LIB_VERSION, \ - (size_t) sizeof(struct jpeg_decompress_struct)) -EXTERN(void) jpeg_CreateCompress JPP((j_compress_ptr cinfo, - int version, size_t structsize)); -EXTERN(void) jpeg_CreateDecompress JPP((j_decompress_ptr cinfo, - int version, size_t structsize)); -/* Destruction of JPEG compression objects */ -EXTERN(void) jpeg_destroy_compress JPP((j_compress_ptr cinfo)); -EXTERN(void) jpeg_destroy_decompress JPP((j_decompress_ptr cinfo)); - -/* Standard data source and destination managers: stdio streams. */ -/* Caller is responsible for opening the file before and closing after. */ -EXTERN(void) jpeg_stdio_dest JPP((j_compress_ptr cinfo, FILE * outfile)); -EXTERN(void) jpeg_stdio_src JPP((j_decompress_ptr cinfo, FILE * infile)); - -/* Data source and destination managers: memory buffers. */ -EXTERN(void) jpeg_mem_dest JPP((j_compress_ptr cinfo, - unsigned char ** outbuffer, - unsigned long * outsize)); -EXTERN(void) jpeg_mem_src JPP((j_decompress_ptr cinfo, - unsigned char * inbuffer, - unsigned long insize)); - -/* Default parameter setup for compression */ -EXTERN(void) jpeg_set_defaults JPP((j_compress_ptr cinfo)); -/* Compression parameter setup aids */ -EXTERN(void) jpeg_set_colorspace JPP((j_compress_ptr cinfo, - J_COLOR_SPACE colorspace)); -EXTERN(void) jpeg_default_colorspace JPP((j_compress_ptr cinfo)); -EXTERN(void) jpeg_set_quality JPP((j_compress_ptr cinfo, int quality, - boolean force_baseline)); -EXTERN(void) jpeg_set_linear_quality JPP((j_compress_ptr cinfo, - int scale_factor, - boolean force_baseline)); -EXTERN(void) jpeg_default_qtables JPP((j_compress_ptr cinfo, - boolean force_baseline)); -EXTERN(void) jpeg_add_quant_table JPP((j_compress_ptr cinfo, int which_tbl, - const unsigned int *basic_table, - int scale_factor, - boolean force_baseline)); -EXTERN(int) jpeg_quality_scaling JPP((int quality)); -EXTERN(void) jpeg_simple_progression JPP((j_compress_ptr cinfo)); -EXTERN(void) jpeg_suppress_tables JPP((j_compress_ptr cinfo, - boolean suppress)); -EXTERN(JQUANT_TBL *) jpeg_alloc_quant_table JPP((j_common_ptr cinfo)); -EXTERN(JHUFF_TBL *) jpeg_alloc_huff_table JPP((j_common_ptr cinfo)); - -/* Main entry points for compression */ -EXTERN(void) jpeg_start_compress JPP((j_compress_ptr cinfo, - boolean write_all_tables)); -EXTERN(JDIMENSION) jpeg_write_scanlines JPP((j_compress_ptr cinfo, - JSAMPARRAY scanlines, - JDIMENSION num_lines)); -EXTERN(void) jpeg_finish_compress JPP((j_compress_ptr cinfo)); - -/* Precalculate JPEG dimensions for current compression parameters. */ -EXTERN(void) jpeg_calc_jpeg_dimensions JPP((j_compress_ptr cinfo)); - -/* Replaces jpeg_write_scanlines when writing raw downsampled data. */ -EXTERN(JDIMENSION) jpeg_write_raw_data JPP((j_compress_ptr cinfo, - JSAMPIMAGE data, - JDIMENSION num_lines)); - -/* Write a special marker. See libjpeg.txt concerning safe usage. */ -EXTERN(void) jpeg_write_marker - JPP((j_compress_ptr cinfo, int marker, - const JOCTET * dataptr, unsigned int datalen)); -/* Same, but piecemeal. */ -EXTERN(void) jpeg_write_m_header - JPP((j_compress_ptr cinfo, int marker, unsigned int datalen)); -EXTERN(void) jpeg_write_m_byte - JPP((j_compress_ptr cinfo, int val)); - -/* Alternate compression function: just write an abbreviated table file */ -EXTERN(void) jpeg_write_tables JPP((j_compress_ptr cinfo)); - -/* Decompression startup: read start of JPEG datastream to see what's there */ -EXTERN(int) jpeg_read_header JPP((j_decompress_ptr cinfo, - boolean require_image)); -/* Return value is one of: */ -#define JPEG_SUSPENDED 0 /* Suspended due to lack of input data */ -#define JPEG_HEADER_OK 1 /* Found valid image datastream */ -#define JPEG_HEADER_TABLES_ONLY 2 /* Found valid table-specs-only datastream */ -/* If you pass require_image = TRUE (normal case), you need not check for - * a TABLES_ONLY return code; an abbreviated file will cause an error exit. - * JPEG_SUSPENDED is only possible if you use a data source module that can - * give a suspension return (the stdio source module doesn't). - */ - -/* Main entry points for decompression */ -EXTERN(boolean) jpeg_start_decompress JPP((j_decompress_ptr cinfo)); -EXTERN(JDIMENSION) jpeg_read_scanlines JPP((j_decompress_ptr cinfo, - JSAMPARRAY scanlines, - JDIMENSION max_lines)); -EXTERN(boolean) jpeg_finish_decompress JPP((j_decompress_ptr cinfo)); - -/* Replaces jpeg_read_scanlines when reading raw downsampled data. */ -EXTERN(JDIMENSION) jpeg_read_raw_data JPP((j_decompress_ptr cinfo, - JSAMPIMAGE data, - JDIMENSION max_lines)); - -/* Additional entry points for buffered-image mode. */ -EXTERN(boolean) jpeg_has_multiple_scans JPP((j_decompress_ptr cinfo)); -EXTERN(boolean) jpeg_start_output JPP((j_decompress_ptr cinfo, - int scan_number)); -EXTERN(boolean) jpeg_finish_output JPP((j_decompress_ptr cinfo)); -EXTERN(boolean) jpeg_input_complete JPP((j_decompress_ptr cinfo)); -EXTERN(void) jpeg_new_colormap JPP((j_decompress_ptr cinfo)); -EXTERN(int) jpeg_consume_input JPP((j_decompress_ptr cinfo)); -/* Return value is one of: */ -/* #define JPEG_SUSPENDED 0 Suspended due to lack of input data */ -#define JPEG_REACHED_SOS 1 /* Reached start of new scan */ -#define JPEG_REACHED_EOI 2 /* Reached end of image */ -#define JPEG_ROW_COMPLETED 3 /* Completed one iMCU row */ -#define JPEG_SCAN_COMPLETED 4 /* Completed last iMCU row of a scan */ - -/* Precalculate output dimensions for current decompression parameters. */ -EXTERN(void) jpeg_core_output_dimensions JPP((j_decompress_ptr cinfo)); -EXTERN(void) jpeg_calc_output_dimensions JPP((j_decompress_ptr cinfo)); - -/* Control saving of COM and APPn markers into marker_list. */ -EXTERN(void) jpeg_save_markers - JPP((j_decompress_ptr cinfo, int marker_code, - unsigned int length_limit)); - -/* Install a special processing method for COM or APPn markers. */ -EXTERN(void) jpeg_set_marker_processor - JPP((j_decompress_ptr cinfo, int marker_code, - jpeg_marker_parser_method routine)); - -/* Read or write raw DCT coefficients --- useful for lossless transcoding. */ -EXTERN(jvirt_barray_ptr *) jpeg_read_coefficients JPP((j_decompress_ptr cinfo)); -EXTERN(void) jpeg_write_coefficients JPP((j_compress_ptr cinfo, - jvirt_barray_ptr * coef_arrays)); -EXTERN(void) jpeg_copy_critical_parameters JPP((j_decompress_ptr srcinfo, - j_compress_ptr dstinfo)); - -/* If you choose to abort compression or decompression before completing - * jpeg_finish_(de)compress, then you need to clean up to release memory, - * temporary files, etc. You can just call jpeg_destroy_(de)compress - * if you're done with the JPEG object, but if you want to clean it up and - * reuse it, call this: - */ -EXTERN(void) jpeg_abort_compress JPP((j_compress_ptr cinfo)); -EXTERN(void) jpeg_abort_decompress JPP((j_decompress_ptr cinfo)); - -/* Generic versions of jpeg_abort and jpeg_destroy that work on either - * flavor of JPEG object. These may be more convenient in some places. - */ -EXTERN(void) jpeg_abort JPP((j_common_ptr cinfo)); -EXTERN(void) jpeg_destroy JPP((j_common_ptr cinfo)); - -/* Default restart-marker-resync procedure for use by data source modules */ -EXTERN(boolean) jpeg_resync_to_restart JPP((j_decompress_ptr cinfo, - int desired)); - - -/* These marker codes are exported since applications and data source modules - * are likely to want to use them. - */ - -#define JPEG_RST0 0xD0 /* RST0 marker code */ -#define JPEG_EOI 0xD9 /* EOI marker code */ -#define JPEG_APP0 0xE0 /* APP0 marker code */ -#define JPEG_COM 0xFE /* COM marker code */ - - -/* If we have a brain-damaged compiler that emits warnings (or worse, errors) - * for structure definitions that are never filled in, keep it quiet by - * supplying dummy definitions for the various substructures. - */ - -#ifdef INCOMPLETE_TYPES_BROKEN -#ifndef JPEG_INTERNALS /* will be defined in jpegint.h */ -struct jvirt_sarray_control { long dummy; }; -struct jvirt_barray_control { long dummy; }; -struct jpeg_comp_master { long dummy; }; -struct jpeg_c_main_controller { long dummy; }; -struct jpeg_c_prep_controller { long dummy; }; -struct jpeg_c_coef_controller { long dummy; }; -struct jpeg_marker_writer { long dummy; }; -struct jpeg_color_converter { long dummy; }; -struct jpeg_downsampler { long dummy; }; -struct jpeg_forward_dct { long dummy; }; -struct jpeg_entropy_encoder { long dummy; }; -struct jpeg_decomp_master { long dummy; }; -struct jpeg_d_main_controller { long dummy; }; -struct jpeg_d_coef_controller { long dummy; }; -struct jpeg_d_post_controller { long dummy; }; -struct jpeg_input_controller { long dummy; }; -struct jpeg_marker_reader { long dummy; }; -struct jpeg_entropy_decoder { long dummy; }; -struct jpeg_inverse_dct { long dummy; }; -struct jpeg_upsampler { long dummy; }; -struct jpeg_color_deconverter { long dummy; }; -struct jpeg_color_quantizer { long dummy; }; -#endif /* JPEG_INTERNALS */ -#endif /* INCOMPLETE_TYPES_BROKEN */ - - -/* - * The JPEG library modules define JPEG_INTERNALS before including this file. - * The internal structure declarations are read only when that is true. - * Applications using the library should not include jpegint.h, but may wish - * to include jerror.h. - */ - -#ifdef JPEG_INTERNALS -#include "jpegint.h" /* fetch private declarations */ -#include "jerror.h" /* fetch error codes too */ -#endif - -#ifdef __cplusplus -#ifndef DONT_USE_EXTERN_C -} -#endif -#endif - -#endif /* JPEGLIB_H */ diff --git a/jpeg/jpegsr8d.zip b/jpeg/jpegsr8d.zip deleted file mode 100755 index 9a12a90..0000000 Binary files a/jpeg/jpegsr8d.zip and /dev/null differ diff --git a/jpeg/jpegtran.1 b/jpeg/jpegtran.1 deleted file mode 100755 index 0ad1bbc..0000000 --- a/jpeg/jpegtran.1 +++ /dev/null @@ -1,285 +0,0 @@ -.TH JPEGTRAN 1 "28 December 2009" -.SH NAME -jpegtran \- lossless transformation of JPEG files -.SH SYNOPSIS -.B jpegtran -[ -.I options -] -[ -.I filename -] -.LP -.SH DESCRIPTION -.LP -.B jpegtran -performs various useful transformations of JPEG files. -It can translate the coded representation from one variant of JPEG to another, -for example from baseline JPEG to progressive JPEG or vice versa. It can also -perform some rearrangements of the image data, for example turning an image -from landscape to portrait format by rotation. -.PP -.B jpegtran -works by rearranging the compressed data (DCT coefficients), without -ever fully decoding the image. Therefore, its transformations are lossless: -there is no image degradation at all, which would not be true if you used -.B djpeg -followed by -.B cjpeg -to accomplish the same conversion. But by the same token, -.B jpegtran -cannot perform lossy operations such as changing the image quality. -.PP -.B jpegtran -reads the named JPEG/JFIF file, or the standard input if no file is -named, and produces a JPEG/JFIF file on the standard output. -.SH OPTIONS -All switch names may be abbreviated; for example, -.B \-optimize -may be written -.B \-opt -or -.BR \-o . -Upper and lower case are equivalent. -British spellings are also accepted (e.g., -.BR \-optimise ), -though for brevity these are not mentioned below. -.PP -To specify the coded JPEG representation used in the output file, -.B jpegtran -accepts a subset of the switches recognized by -.BR cjpeg : -.TP -.B \-optimize -Perform optimization of entropy encoding parameters. -.TP -.B \-progressive -Create progressive JPEG file. -.TP -.BI \-restart " N" -Emit a JPEG restart marker every N MCU rows, or every N MCU blocks if "B" is -attached to the number. -.TP -.B \-arithmetic -Use arithmetic coding. -.TP -.BI \-scans " file" -Use the scan script given in the specified text file. -.PP -See -.BR cjpeg (1) -for more details about these switches. -If you specify none of these switches, you get a plain baseline-JPEG output -file. The quality setting and so forth are determined by the input file. -.PP -The image can be losslessly transformed by giving one of these switches: -.TP -.B \-flip horizontal -Mirror image horizontally (left-right). -.TP -.B \-flip vertical -Mirror image vertically (top-bottom). -.TP -.B \-rotate 90 -Rotate image 90 degrees clockwise. -.TP -.B \-rotate 180 -Rotate image 180 degrees. -.TP -.B \-rotate 270 -Rotate image 270 degrees clockwise (or 90 ccw). -.TP -.B \-transpose -Transpose image (across UL-to-LR axis). -.TP -.B \-transverse -Transverse transpose (across UR-to-LL axis). -.IP -The transpose transformation has no restrictions regarding image dimensions. -The other transformations operate rather oddly if the image dimensions are not -a multiple of the iMCU size (usually 8 or 16 pixels), because they can only -transform complete blocks of DCT coefficient data in the desired way. -.IP -.BR jpegtran 's -default behavior when transforming an odd-size image is designed -to preserve exact reversibility and mathematical consistency of the -transformation set. As stated, transpose is able to flip the entire image -area. Horizontal mirroring leaves any partial iMCU column at the right edge -untouched, but is able to flip all rows of the image. Similarly, vertical -mirroring leaves any partial iMCU row at the bottom edge untouched, but is -able to flip all columns. The other transforms can be built up as sequences -of transpose and flip operations; for consistency, their actions on edge -pixels are defined to be the same as the end result of the corresponding -transpose-and-flip sequence. -.IP -For practical use, you may prefer to discard any untransformable edge pixels -rather than having a strange-looking strip along the right and/or bottom edges -of a transformed image. To do this, add the -.B \-trim -switch: -.TP -.B \-trim -Drop non-transformable edge blocks. -.IP -Obviously, a transformation with -.B \-trim -is not reversible, so strictly speaking -.B jpegtran -with this switch is not lossless. Also, the expected mathematical -equivalences between the transformations no longer hold. For example, -.B \-rot 270 -trim -trims only the bottom edge, but -.B \-rot 90 -trim -followed by -.B \-rot 180 -trim -trims both edges. -.IP -If you are only interested in perfect transformation, add the -.B \-perfect -switch: -.TP -.B \-perfect -Fails with an error if the transformation is not perfect. -.IP -For example you may want to do -.IP -.B (jpegtran \-rot 90 -perfect -.I foo.jpg -.B || djpeg -.I foo.jpg -.B | pnmflip \-r90 | cjpeg) -.IP -to do a perfect rotation if available or an approximated one if not. -.PP -We also offer a lossless-crop option, which discards data outside a given -image region but losslessly preserves what is inside. Like the rotate and -flip transforms, lossless crop is restricted by the current JPEG format: the -upper left corner of the selected region must fall on an iMCU boundary. If -this does not hold for the given crop parameters, we silently move the upper -left corner up and/or left to make it so, simultaneously increasing the region -dimensions to keep the lower right crop corner unchanged. (Thus, the output -image covers at least the requested region, but may cover more.) - -The image can be losslessly cropped by giving the switch: -.TP -.B \-crop WxH+X+Y -Crop to a rectangular subarea of width W, height H starting at point X,Y. -.PP -Other not-strictly-lossless transformation switches are: -.TP -.B \-grayscale -Force grayscale output. -.IP -This option discards the chrominance channels if the input image is YCbCr -(ie, a standard color JPEG), resulting in a grayscale JPEG file. The -luminance channel is preserved exactly, so this is a better method of reducing -to grayscale than decompression, conversion, and recompression. This switch -is particularly handy for fixing a monochrome picture that was mistakenly -encoded as a color JPEG. (In such a case, the space savings from getting rid -of the near-empty chroma channels won't be large; but the decoding time for -a grayscale JPEG is substantially less than that for a color JPEG.) -.TP -.BI \-scale " M/N" -Scale the output image by a factor M/N. -.IP -Currently supported scale factors are M/N with all M from 1 to 16, where N is -the source DCT size, which is 8 for baseline JPEG. If the /N part is omitted, -then M specifies the DCT scaled size to be applied on the given input. For -baseline JPEG this is equivalent to M/8 scaling, since the source DCT size -for baseline JPEG is 8. -.B Caution: -An implementation of the JPEG SmartScale extension is required for this -feature. SmartScale enabled JPEG is not yet widely implemented, so many -decoders will be unable to view a SmartScale extended JPEG file at all. -.PP -.B jpegtran -also recognizes these switches that control what to do with "extra" markers, -such as comment blocks: -.TP -.B \-copy none -Copy no extra markers from source file. This setting suppresses all -comments and other excess baggage present in the source file. -.TP -.B \-copy comments -Copy only comment markers. This setting copies comments from the source file, -but discards any other inessential (for image display) data. -.TP -.B \-copy all -Copy all extra markers. This setting preserves miscellaneous markers -found in the source file, such as JFIF thumbnails, Exif data, and Photoshop -settings. In some files these extra markers can be sizable. -.IP -The default behavior is -.BR "\-copy comments" . -(Note: in IJG releases v6 and v6a, -.B jpegtran -always did the equivalent of -.BR "\-copy none" .) -.PP -Additional switches recognized by jpegtran are: -.TP -.BI \-maxmemory " N" -Set limit for amount of memory to use in processing large images. Value is -in thousands of bytes, or millions of bytes if "M" is attached to the -number. For example, -.B \-max 4m -selects 4000000 bytes. If more space is needed, temporary files will be used. -.TP -.BI \-outfile " name" -Send output image to the named file, not to standard output. -.TP -.B \-verbose -Enable debug printout. More -.BR \-v 's -give more output. Also, version information is printed at startup. -.TP -.B \-debug -Same as -.BR \-verbose . -.SH EXAMPLES -.LP -This example converts a baseline JPEG file to progressive form: -.IP -.B jpegtran \-progressive -.I foo.jpg -.B > -.I fooprog.jpg -.PP -This example rotates an image 90 degrees clockwise, discarding any -unrotatable edge pixels: -.IP -.B jpegtran \-rot 90 -trim -.I foo.jpg -.B > -.I foo90.jpg -.SH ENVIRONMENT -.TP -.B JPEGMEM -If this environment variable is set, its value is the default memory limit. -The value is specified as described for the -.B \-maxmemory -switch. -.B JPEGMEM -overrides the default value specified when the program was compiled, and -itself is overridden by an explicit -.BR \-maxmemory . -.SH SEE ALSO -.BR cjpeg (1), -.BR djpeg (1), -.BR rdjpgcom (1), -.BR wrjpgcom (1) -.br -Wallace, Gregory K. "The JPEG Still Picture Compression Standard", -Communications of the ACM, April 1991 (vol. 34, no. 4), pp. 30-44. -.SH AUTHOR -Independent JPEG Group -.SH BUGS -The transform options can't transform odd-size images perfectly. Use -.B \-trim -or -.B \-perfect -if you don't like the results. -.PP -The entire image is read into memory and then written out again, even in -cases where this isn't really necessary. Expect swapping on large images, -especially when using the more complex transform options. diff --git a/jpeg/jpegtran.c b/jpeg/jpegtran.c deleted file mode 100755 index e539e91..0000000 --- a/jpeg/jpegtran.c +++ /dev/null @@ -1,560 +0,0 @@ -/* - * jpegtran.c - * - * Copyright (C) 1995-2011, Thomas G. Lane, Guido Vollbeding. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains a command-line user interface for JPEG transcoding. - * It is very similar to cjpeg.c, and partly to djpeg.c, but provides - * lossless transcoding between different JPEG file formats. It also - * provides some lossless and sort-of-lossless transformations of JPEG data. - */ - -#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ -#include "transupp.h" /* Support routines for jpegtran */ -#include "jversion.h" /* for version message */ - -#ifdef USE_CCOMMAND /* command-line reader for Macintosh */ -#ifdef __MWERKS__ -#include /* Metrowerks needs this */ -#include /* ... and this */ -#endif -#ifdef THINK_C -#include /* Think declares it here */ -#endif -#endif - - -/* - * Argument-parsing code. - * The switch parser is designed to be useful with DOS-style command line - * syntax, ie, intermixed switches and file names, where only the switches - * to the left of a given file name affect processing of that file. - * The main program in this file doesn't actually use this capability... - */ - - -static const char * progname; /* program name for error messages */ -static char * outfilename; /* for -outfile switch */ -static char * scaleoption; /* -scale switch */ -static JCOPY_OPTION copyoption; /* -copy switch */ -static jpeg_transform_info transformoption; /* image transformation options */ - - -LOCAL(void) -usage (void) -/* complain about bad command line */ -{ - fprintf(stderr, "usage: %s [switches] ", progname); -#ifdef TWO_FILE_COMMANDLINE - fprintf(stderr, "inputfile outputfile\n"); -#else - fprintf(stderr, "[inputfile]\n"); -#endif - - fprintf(stderr, "Switches (names may be abbreviated):\n"); - fprintf(stderr, " -copy none Copy no extra markers from source file\n"); - fprintf(stderr, " -copy comments Copy only comment markers (default)\n"); - fprintf(stderr, " -copy all Copy all extra markers\n"); -#ifdef ENTROPY_OPT_SUPPORTED - fprintf(stderr, " -optimize Optimize Huffman table (smaller file, but slow compression)\n"); -#endif -#ifdef C_PROGRESSIVE_SUPPORTED - fprintf(stderr, " -progressive Create progressive JPEG file\n"); -#endif - fprintf(stderr, "Switches for modifying the image:\n"); -#if TRANSFORMS_SUPPORTED - fprintf(stderr, " -crop WxH+X+Y Crop to a rectangular subarea\n"); - fprintf(stderr, " -grayscale Reduce to grayscale (omit color data)\n"); - fprintf(stderr, " -flip [horizontal|vertical] Mirror image (left-right or top-bottom)\n"); - fprintf(stderr, " -perfect Fail if there is non-transformable edge blocks\n"); - fprintf(stderr, " -rotate [90|180|270] Rotate image (degrees clockwise)\n"); -#endif - fprintf(stderr, " -scale M/N Scale output image by fraction M/N, eg, 1/8\n"); -#if TRANSFORMS_SUPPORTED - fprintf(stderr, " -transpose Transpose image\n"); - fprintf(stderr, " -transverse Transverse transpose image\n"); - fprintf(stderr, " -trim Drop non-transformable edge blocks\n"); -#endif - fprintf(stderr, "Switches for advanced users:\n"); -#ifdef C_ARITH_CODING_SUPPORTED - fprintf(stderr, " -arithmetic Use arithmetic coding\n"); -#endif - fprintf(stderr, " -restart N Set restart interval in rows, or in blocks with B\n"); - fprintf(stderr, " -maxmemory N Maximum memory to use (in kbytes)\n"); - fprintf(stderr, " -outfile name Specify name for output file\n"); - fprintf(stderr, " -verbose or -debug Emit debug output\n"); - fprintf(stderr, "Switches for wizards:\n"); -#ifdef C_MULTISCAN_FILES_SUPPORTED - fprintf(stderr, " -scans file Create multi-scan JPEG per script file\n"); -#endif - exit(EXIT_FAILURE); -} - - -LOCAL(void) -select_transform (JXFORM_CODE transform) -/* Silly little routine to detect multiple transform options, - * which we can't handle. - */ -{ -#if TRANSFORMS_SUPPORTED - if (transformoption.transform == JXFORM_NONE || - transformoption.transform == transform) { - transformoption.transform = transform; - } else { - fprintf(stderr, "%s: can only do one image transformation at a time\n", - progname); - usage(); - } -#else - fprintf(stderr, "%s: sorry, image transformation was not compiled\n", - progname); - exit(EXIT_FAILURE); -#endif -} - - -LOCAL(int) -parse_switches (j_compress_ptr cinfo, int argc, char **argv, - int last_file_arg_seen, boolean for_real) -/* Parse optional switches. - * Returns argv[] index of first file-name argument (== argc if none). - * Any file names with indexes <= last_file_arg_seen are ignored; - * they have presumably been processed in a previous iteration. - * (Pass 0 for last_file_arg_seen on the first or only iteration.) - * for_real is FALSE on the first (dummy) pass; we may skip any expensive - * processing. - */ -{ - int argn; - char * arg; - boolean simple_progressive; - char * scansarg = NULL; /* saves -scans parm if any */ - - /* Set up default JPEG parameters. */ - simple_progressive = FALSE; - outfilename = NULL; - scaleoption = NULL; - copyoption = JCOPYOPT_DEFAULT; - transformoption.transform = JXFORM_NONE; - transformoption.perfect = FALSE; - transformoption.trim = FALSE; - transformoption.force_grayscale = FALSE; - transformoption.crop = FALSE; - cinfo->err->trace_level = 0; - - /* Scan command line options, adjust parameters */ - - for (argn = 1; argn < argc; argn++) { - arg = argv[argn]; - if (*arg != '-') { - /* Not a switch, must be a file name argument */ - if (argn <= last_file_arg_seen) { - outfilename = NULL; /* -outfile applies to just one input file */ - continue; /* ignore this name if previously processed */ - } - break; /* else done parsing switches */ - } - arg++; /* advance past switch marker character */ - - if (keymatch(arg, "arithmetic", 1)) { - /* Use arithmetic coding. */ -#ifdef C_ARITH_CODING_SUPPORTED - cinfo->arith_code = TRUE; -#else - fprintf(stderr, "%s: sorry, arithmetic coding not supported\n", - progname); - exit(EXIT_FAILURE); -#endif - - } else if (keymatch(arg, "copy", 2)) { - /* Select which extra markers to copy. */ - if (++argn >= argc) /* advance to next argument */ - usage(); - if (keymatch(argv[argn], "none", 1)) { - copyoption = JCOPYOPT_NONE; - } else if (keymatch(argv[argn], "comments", 1)) { - copyoption = JCOPYOPT_COMMENTS; - } else if (keymatch(argv[argn], "all", 1)) { - copyoption = JCOPYOPT_ALL; - } else - usage(); - - } else if (keymatch(arg, "crop", 2)) { - /* Perform lossless cropping. */ -#if TRANSFORMS_SUPPORTED - if (++argn >= argc) /* advance to next argument */ - usage(); - if (! jtransform_parse_crop_spec(&transformoption, argv[argn])) { - fprintf(stderr, "%s: bogus -crop argument '%s'\n", - progname, argv[argn]); - exit(EXIT_FAILURE); - } -#else - select_transform(JXFORM_NONE); /* force an error */ -#endif - - } else if (keymatch(arg, "debug", 1) || keymatch(arg, "verbose", 1)) { - /* Enable debug printouts. */ - /* On first -d, print version identification */ - static boolean printed_version = FALSE; - - if (! printed_version) { - fprintf(stderr, "Independent JPEG Group's JPEGTRAN, version %s\n%s\n", - JVERSION, JCOPYRIGHT); - printed_version = TRUE; - } - cinfo->err->trace_level++; - - } else if (keymatch(arg, "flip", 1)) { - /* Mirror left-right or top-bottom. */ - if (++argn >= argc) /* advance to next argument */ - usage(); - if (keymatch(argv[argn], "horizontal", 1)) - select_transform(JXFORM_FLIP_H); - else if (keymatch(argv[argn], "vertical", 1)) - select_transform(JXFORM_FLIP_V); - else - usage(); - - } else if (keymatch(arg, "grayscale", 1) || keymatch(arg, "greyscale",1)) { - /* Force to grayscale. */ -#if TRANSFORMS_SUPPORTED - transformoption.force_grayscale = TRUE; -#else - select_transform(JXFORM_NONE); /* force an error */ -#endif - - } else if (keymatch(arg, "maxmemory", 3)) { - /* Maximum memory in Kb (or Mb with 'm'). */ - long lval; - char ch = 'x'; - - if (++argn >= argc) /* advance to next argument */ - usage(); - if (sscanf(argv[argn], "%ld%c", &lval, &ch) < 1) - usage(); - if (ch == 'm' || ch == 'M') - lval *= 1000L; - cinfo->mem->max_memory_to_use = lval * 1000L; - - } else if (keymatch(arg, "optimize", 1) || keymatch(arg, "optimise", 1)) { - /* Enable entropy parm optimization. */ -#ifdef ENTROPY_OPT_SUPPORTED - cinfo->optimize_coding = TRUE; -#else - fprintf(stderr, "%s: sorry, entropy optimization was not compiled\n", - progname); - exit(EXIT_FAILURE); -#endif - - } else if (keymatch(arg, "outfile", 4)) { - /* Set output file name. */ - if (++argn >= argc) /* advance to next argument */ - usage(); - outfilename = argv[argn]; /* save it away for later use */ - - } else if (keymatch(arg, "perfect", 2)) { - /* Fail if there is any partial edge MCUs that the transform can't - * handle. */ - transformoption.perfect = TRUE; - - } else if (keymatch(arg, "progressive", 2)) { - /* Select simple progressive mode. */ -#ifdef C_PROGRESSIVE_SUPPORTED - simple_progressive = TRUE; - /* We must postpone execution until num_components is known. */ -#else - fprintf(stderr, "%s: sorry, progressive output was not compiled\n", - progname); - exit(EXIT_FAILURE); -#endif - - } else if (keymatch(arg, "restart", 1)) { - /* Restart interval in MCU rows (or in MCUs with 'b'). */ - long lval; - char ch = 'x'; - - if (++argn >= argc) /* advance to next argument */ - usage(); - if (sscanf(argv[argn], "%ld%c", &lval, &ch) < 1) - usage(); - if (lval < 0 || lval > 65535L) - usage(); - if (ch == 'b' || ch == 'B') { - cinfo->restart_interval = (unsigned int) lval; - cinfo->restart_in_rows = 0; /* else prior '-restart n' overrides me */ - } else { - cinfo->restart_in_rows = (int) lval; - /* restart_interval will be computed during startup */ - } - - } else if (keymatch(arg, "rotate", 2)) { - /* Rotate 90, 180, or 270 degrees (measured clockwise). */ - if (++argn >= argc) /* advance to next argument */ - usage(); - if (keymatch(argv[argn], "90", 2)) - select_transform(JXFORM_ROT_90); - else if (keymatch(argv[argn], "180", 3)) - select_transform(JXFORM_ROT_180); - else if (keymatch(argv[argn], "270", 3)) - select_transform(JXFORM_ROT_270); - else - usage(); - - } else if (keymatch(arg, "scale", 4)) { - /* Scale the output image by a fraction M/N. */ - if (++argn >= argc) /* advance to next argument */ - usage(); - scaleoption = argv[argn]; - /* We must postpone processing until decompression startup. */ - - } else if (keymatch(arg, "scans", 1)) { - /* Set scan script. */ -#ifdef C_MULTISCAN_FILES_SUPPORTED - if (++argn >= argc) /* advance to next argument */ - usage(); - scansarg = argv[argn]; - /* We must postpone reading the file in case -progressive appears. */ -#else - fprintf(stderr, "%s: sorry, multi-scan output was not compiled\n", - progname); - exit(EXIT_FAILURE); -#endif - - } else if (keymatch(arg, "transpose", 1)) { - /* Transpose (across UL-to-LR axis). */ - select_transform(JXFORM_TRANSPOSE); - - } else if (keymatch(arg, "transverse", 6)) { - /* Transverse transpose (across UR-to-LL axis). */ - select_transform(JXFORM_TRANSVERSE); - - } else if (keymatch(arg, "trim", 3)) { - /* Trim off any partial edge MCUs that the transform can't handle. */ - transformoption.trim = TRUE; - - } else { - usage(); /* bogus switch */ - } - } - - /* Post-switch-scanning cleanup */ - - if (for_real) { - -#ifdef C_PROGRESSIVE_SUPPORTED - if (simple_progressive) /* process -progressive; -scans can override */ - jpeg_simple_progression(cinfo); -#endif - -#ifdef C_MULTISCAN_FILES_SUPPORTED - if (scansarg != NULL) /* process -scans if it was present */ - if (! read_scan_script(cinfo, scansarg)) - usage(); -#endif - } - - return argn; /* return index of next arg (file name) */ -} - - -/* - * The main program. - */ - -int -main (int argc, char **argv) -{ - struct jpeg_decompress_struct srcinfo; - struct jpeg_compress_struct dstinfo; - struct jpeg_error_mgr jsrcerr, jdsterr; -#ifdef PROGRESS_REPORT - struct cdjpeg_progress_mgr progress; -#endif - jvirt_barray_ptr * src_coef_arrays; - jvirt_barray_ptr * dst_coef_arrays; - int file_index; - /* We assume all-in-memory processing and can therefore use only a - * single file pointer for sequential input and output operation. - */ - FILE * fp; - - /* On Mac, fetch a command line. */ -#ifdef USE_CCOMMAND - argc = ccommand(&argv); -#endif - - progname = argv[0]; - if (progname == NULL || progname[0] == 0) - progname = "jpegtran"; /* in case C library doesn't provide it */ - - /* Initialize the JPEG decompression object with default error handling. */ - srcinfo.err = jpeg_std_error(&jsrcerr); - jpeg_create_decompress(&srcinfo); - /* Initialize the JPEG compression object with default error handling. */ - dstinfo.err = jpeg_std_error(&jdsterr); - jpeg_create_compress(&dstinfo); - - /* Now safe to enable signal catcher. - * Note: we assume only the decompression object will have virtual arrays. - */ -#ifdef NEED_SIGNAL_CATCHER - enable_signal_catcher((j_common_ptr) &srcinfo); -#endif - - /* Scan command line to find file names. - * It is convenient to use just one switch-parsing routine, but the switch - * values read here are mostly ignored; we will rescan the switches after - * opening the input file. Also note that most of the switches affect the - * destination JPEG object, so we parse into that and then copy over what - * needs to affects the source too. - */ - - file_index = parse_switches(&dstinfo, argc, argv, 0, FALSE); - jsrcerr.trace_level = jdsterr.trace_level; - srcinfo.mem->max_memory_to_use = dstinfo.mem->max_memory_to_use; - -#ifdef TWO_FILE_COMMANDLINE - /* Must have either -outfile switch or explicit output file name */ - if (outfilename == NULL) { - if (file_index != argc-2) { - fprintf(stderr, "%s: must name one input and one output file\n", - progname); - usage(); - } - outfilename = argv[file_index+1]; - } else { - if (file_index != argc-1) { - fprintf(stderr, "%s: must name one input and one output file\n", - progname); - usage(); - } - } -#else - /* Unix style: expect zero or one file name */ - if (file_index < argc-1) { - fprintf(stderr, "%s: only one input file\n", progname); - usage(); - } -#endif /* TWO_FILE_COMMANDLINE */ - - /* Open the input file. */ - if (file_index < argc) { - if ((fp = fopen(argv[file_index], READ_BINARY)) == NULL) { - fprintf(stderr, "%s: can't open %s for reading\n", progname, argv[file_index]); - exit(EXIT_FAILURE); - } - } else { - /* default input file is stdin */ - fp = read_stdin(); - } - -#ifdef PROGRESS_REPORT - start_progress_monitor((j_common_ptr) &dstinfo, &progress); -#endif - - /* Specify data source for decompression */ - jpeg_stdio_src(&srcinfo, fp); - - /* Enable saving of extra markers that we want to copy */ - jcopy_markers_setup(&srcinfo, copyoption); - - /* Read file header */ - (void) jpeg_read_header(&srcinfo, TRUE); - - /* Adjust default decompression parameters */ - if (scaleoption != NULL) - if (sscanf(scaleoption, "%d/%d", - &srcinfo.scale_num, &srcinfo.scale_denom) < 1) - usage(); - - /* Any space needed by a transform option must be requested before - * jpeg_read_coefficients so that memory allocation will be done right. - */ -#if TRANSFORMS_SUPPORTED - /* Fail right away if -perfect is given and transformation is not perfect. - */ - if (!jtransform_request_workspace(&srcinfo, &transformoption)) { - fprintf(stderr, "%s: transformation is not perfect\n", progname); - exit(EXIT_FAILURE); - } -#endif - - /* Read source file as DCT coefficients */ - src_coef_arrays = jpeg_read_coefficients(&srcinfo); - - /* Initialize destination compression parameters from source values */ - jpeg_copy_critical_parameters(&srcinfo, &dstinfo); - - /* Adjust destination parameters if required by transform options; - * also find out which set of coefficient arrays will hold the output. - */ -#if TRANSFORMS_SUPPORTED - dst_coef_arrays = jtransform_adjust_parameters(&srcinfo, &dstinfo, - src_coef_arrays, - &transformoption); -#else - dst_coef_arrays = src_coef_arrays; -#endif - - /* Close input file, if we opened it. - * Note: we assume that jpeg_read_coefficients consumed all input - * until JPEG_REACHED_EOI, and that jpeg_finish_decompress will - * only consume more while (! cinfo->inputctl->eoi_reached). - * We cannot call jpeg_finish_decompress here since we still need the - * virtual arrays allocated from the source object for processing. - */ - if (fp != stdin) - fclose(fp); - - /* Open the output file. */ - if (outfilename != NULL) { - if ((fp = fopen(outfilename, WRITE_BINARY)) == NULL) { - fprintf(stderr, "%s: can't open %s for writing\n", progname, outfilename); - exit(EXIT_FAILURE); - } - } else { - /* default output file is stdout */ - fp = write_stdout(); - } - - /* Adjust default compression parameters by re-parsing the options */ - file_index = parse_switches(&dstinfo, argc, argv, 0, TRUE); - - /* Specify data destination for compression */ - jpeg_stdio_dest(&dstinfo, fp); - - /* Start compressor (note no image data is actually written here) */ - jpeg_write_coefficients(&dstinfo, dst_coef_arrays); - - /* Copy to the output file any extra markers that we want to preserve */ - jcopy_markers_execute(&srcinfo, &dstinfo, copyoption); - - /* Execute image transformation, if any */ -#if TRANSFORMS_SUPPORTED - jtransform_execute_transformation(&srcinfo, &dstinfo, - src_coef_arrays, - &transformoption); -#endif - - /* Finish compression and release memory */ - jpeg_finish_compress(&dstinfo); - jpeg_destroy_compress(&dstinfo); - (void) jpeg_finish_decompress(&srcinfo); - jpeg_destroy_decompress(&srcinfo); - - /* Close output file, if we opened it */ - if (fp != stdout) - fclose(fp); - -#ifdef PROGRESS_REPORT - end_progress_monitor((j_common_ptr) &dstinfo); -#endif - - /* All done. */ - exit(jsrcerr.num_warnings + jdsterr.num_warnings ?EXIT_WARNING:EXIT_SUCCESS); - return 0; /* suppress no-return-value warnings */ -} diff --git a/jpeg/jquant1.c b/jpeg/jquant1.c deleted file mode 100755 index 9d11f70..0000000 --- a/jpeg/jquant1.c +++ /dev/null @@ -1,857 +0,0 @@ -/* - * jquant1.c - * - * Copyright (C) 1991-1996, Thomas G. Lane. - * Modified 2011 by Guido Vollbeding. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains 1-pass color quantization (color mapping) routines. - * These routines provide mapping to a fixed color map using equally spaced - * color values. Optional Floyd-Steinberg or ordered dithering is available. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - -#ifdef QUANT_1PASS_SUPPORTED - - -/* - * The main purpose of 1-pass quantization is to provide a fast, if not very - * high quality, colormapped output capability. A 2-pass quantizer usually - * gives better visual quality; however, for quantized grayscale output this - * quantizer is perfectly adequate. Dithering is highly recommended with this - * quantizer, though you can turn it off if you really want to. - * - * In 1-pass quantization the colormap must be chosen in advance of seeing the - * image. We use a map consisting of all combinations of Ncolors[i] color - * values for the i'th component. The Ncolors[] values are chosen so that - * their product, the total number of colors, is no more than that requested. - * (In most cases, the product will be somewhat less.) - * - * Since the colormap is orthogonal, the representative value for each color - * component can be determined without considering the other components; - * then these indexes can be combined into a colormap index by a standard - * N-dimensional-array-subscript calculation. Most of the arithmetic involved - * can be precalculated and stored in the lookup table colorindex[]. - * colorindex[i][j] maps pixel value j in component i to the nearest - * representative value (grid plane) for that component; this index is - * multiplied by the array stride for component i, so that the - * index of the colormap entry closest to a given pixel value is just - * sum( colorindex[component-number][pixel-component-value] ) - * Aside from being fast, this scheme allows for variable spacing between - * representative values with no additional lookup cost. - * - * If gamma correction has been applied in color conversion, it might be wise - * to adjust the color grid spacing so that the representative colors are - * equidistant in linear space. At this writing, gamma correction is not - * implemented by jdcolor, so nothing is done here. - */ - - -/* Declarations for ordered dithering. - * - * We use a standard 16x16 ordered dither array. The basic concept of ordered - * dithering is described in many references, for instance Dale Schumacher's - * chapter II.2 of Graphics Gems II (James Arvo, ed. Academic Press, 1991). - * In place of Schumacher's comparisons against a "threshold" value, we add a - * "dither" value to the input pixel and then round the result to the nearest - * output value. The dither value is equivalent to (0.5 - threshold) times - * the distance between output values. For ordered dithering, we assume that - * the output colors are equally spaced; if not, results will probably be - * worse, since the dither may be too much or too little at a given point. - * - * The normal calculation would be to form pixel value + dither, range-limit - * this to 0..MAXJSAMPLE, and then index into the colorindex table as usual. - * We can skip the separate range-limiting step by extending the colorindex - * table in both directions. - */ - -#define ODITHER_SIZE 16 /* dimension of dither matrix */ -/* NB: if ODITHER_SIZE is not a power of 2, ODITHER_MASK uses will break */ -#define ODITHER_CELLS (ODITHER_SIZE*ODITHER_SIZE) /* # cells in matrix */ -#define ODITHER_MASK (ODITHER_SIZE-1) /* mask for wrapping around counters */ - -typedef int ODITHER_MATRIX[ODITHER_SIZE][ODITHER_SIZE]; -typedef int (*ODITHER_MATRIX_PTR)[ODITHER_SIZE]; - -static const UINT8 base_dither_matrix[ODITHER_SIZE][ODITHER_SIZE] = { - /* Bayer's order-4 dither array. Generated by the code given in - * Stephen Hawley's article "Ordered Dithering" in Graphics Gems I. - * The values in this array must range from 0 to ODITHER_CELLS-1. - */ - { 0,192, 48,240, 12,204, 60,252, 3,195, 51,243, 15,207, 63,255 }, - { 128, 64,176,112,140, 76,188,124,131, 67,179,115,143, 79,191,127 }, - { 32,224, 16,208, 44,236, 28,220, 35,227, 19,211, 47,239, 31,223 }, - { 160, 96,144, 80,172,108,156, 92,163, 99,147, 83,175,111,159, 95 }, - { 8,200, 56,248, 4,196, 52,244, 11,203, 59,251, 7,199, 55,247 }, - { 136, 72,184,120,132, 68,180,116,139, 75,187,123,135, 71,183,119 }, - { 40,232, 24,216, 36,228, 20,212, 43,235, 27,219, 39,231, 23,215 }, - { 168,104,152, 88,164,100,148, 84,171,107,155, 91,167,103,151, 87 }, - { 2,194, 50,242, 14,206, 62,254, 1,193, 49,241, 13,205, 61,253 }, - { 130, 66,178,114,142, 78,190,126,129, 65,177,113,141, 77,189,125 }, - { 34,226, 18,210, 46,238, 30,222, 33,225, 17,209, 45,237, 29,221 }, - { 162, 98,146, 82,174,110,158, 94,161, 97,145, 81,173,109,157, 93 }, - { 10,202, 58,250, 6,198, 54,246, 9,201, 57,249, 5,197, 53,245 }, - { 138, 74,186,122,134, 70,182,118,137, 73,185,121,133, 69,181,117 }, - { 42,234, 26,218, 38,230, 22,214, 41,233, 25,217, 37,229, 21,213 }, - { 170,106,154, 90,166,102,150, 86,169,105,153, 89,165,101,149, 85 } -}; - - -/* Declarations for Floyd-Steinberg dithering. - * - * Errors are accumulated into the array fserrors[], at a resolution of - * 1/16th of a pixel count. The error at a given pixel is propagated - * to its not-yet-processed neighbors using the standard F-S fractions, - * ... (here) 7/16 - * 3/16 5/16 1/16 - * We work left-to-right on even rows, right-to-left on odd rows. - * - * We can get away with a single array (holding one row's worth of errors) - * by using it to store the current row's errors at pixel columns not yet - * processed, but the next row's errors at columns already processed. We - * need only a few extra variables to hold the errors immediately around the - * current column. (If we are lucky, those variables are in registers, but - * even if not, they're probably cheaper to access than array elements are.) - * - * The fserrors[] array is indexed [component#][position]. - * We provide (#columns + 2) entries per component; the extra entry at each - * end saves us from special-casing the first and last pixels. - * - * Note: on a wide image, we might not have enough room in a PC's near data - * segment to hold the error array; so it is allocated with alloc_large. - */ - -#if BITS_IN_JSAMPLE == 8 -typedef INT16 FSERROR; /* 16 bits should be enough */ -typedef int LOCFSERROR; /* use 'int' for calculation temps */ -#else -typedef INT32 FSERROR; /* may need more than 16 bits */ -typedef INT32 LOCFSERROR; /* be sure calculation temps are big enough */ -#endif - -typedef FSERROR FAR *FSERRPTR; /* pointer to error array (in FAR storage!) */ - - -/* Private subobject */ - -#define MAX_Q_COMPS 4 /* max components I can handle */ - -typedef struct { - struct jpeg_color_quantizer pub; /* public fields */ - - /* Initially allocated colormap is saved here */ - JSAMPARRAY sv_colormap; /* The color map as a 2-D pixel array */ - int sv_actual; /* number of entries in use */ - - JSAMPARRAY colorindex; /* Precomputed mapping for speed */ - /* colorindex[i][j] = index of color closest to pixel value j in component i, - * premultiplied as described above. Since colormap indexes must fit into - * JSAMPLEs, the entries of this array will too. - */ - boolean is_padded; /* is the colorindex padded for odither? */ - - int Ncolors[MAX_Q_COMPS]; /* # of values alloced to each component */ - - /* Variables for ordered dithering */ - int row_index; /* cur row's vertical index in dither matrix */ - ODITHER_MATRIX_PTR odither[MAX_Q_COMPS]; /* one dither array per component */ - - /* Variables for Floyd-Steinberg dithering */ - FSERRPTR fserrors[MAX_Q_COMPS]; /* accumulated errors */ - boolean on_odd_row; /* flag to remember which row we are on */ -} my_cquantizer; - -typedef my_cquantizer * my_cquantize_ptr; - - -/* - * Policy-making subroutines for create_colormap and create_colorindex. - * These routines determine the colormap to be used. The rest of the module - * only assumes that the colormap is orthogonal. - * - * * select_ncolors decides how to divvy up the available colors - * among the components. - * * output_value defines the set of representative values for a component. - * * largest_input_value defines the mapping from input values to - * representative values for a component. - * Note that the latter two routines may impose different policies for - * different components, though this is not currently done. - */ - - -LOCAL(int) -select_ncolors (j_decompress_ptr cinfo, int Ncolors[]) -/* Determine allocation of desired colors to components, */ -/* and fill in Ncolors[] array to indicate choice. */ -/* Return value is total number of colors (product of Ncolors[] values). */ -{ - int nc = cinfo->out_color_components; /* number of color components */ - int max_colors = cinfo->desired_number_of_colors; - int total_colors, iroot, i, j; - boolean changed; - long temp; - static const int RGB_order[3] = { RGB_GREEN, RGB_RED, RGB_BLUE }; - - /* We can allocate at least the nc'th root of max_colors per component. */ - /* Compute floor(nc'th root of max_colors). */ - iroot = 1; - do { - iroot++; - temp = iroot; /* set temp = iroot ** nc */ - for (i = 1; i < nc; i++) - temp *= iroot; - } while (temp <= (long) max_colors); /* repeat till iroot exceeds root */ - iroot--; /* now iroot = floor(root) */ - - /* Must have at least 2 color values per component */ - if (iroot < 2) - ERREXIT1(cinfo, JERR_QUANT_FEW_COLORS, (int) temp); - - /* Initialize to iroot color values for each component */ - total_colors = 1; - for (i = 0; i < nc; i++) { - Ncolors[i] = iroot; - total_colors *= iroot; - } - /* We may be able to increment the count for one or more components without - * exceeding max_colors, though we know not all can be incremented. - * Sometimes, the first component can be incremented more than once! - * (Example: for 16 colors, we start at 2*2*2, go to 3*2*2, then 4*2*2.) - * In RGB colorspace, try to increment G first, then R, then B. - */ - do { - changed = FALSE; - for (i = 0; i < nc; i++) { - j = (cinfo->out_color_space == JCS_RGB ? RGB_order[i] : i); - /* calculate new total_colors if Ncolors[j] is incremented */ - temp = total_colors / Ncolors[j]; - temp *= Ncolors[j]+1; /* done in long arith to avoid oflo */ - if (temp > (long) max_colors) - break; /* won't fit, done with this pass */ - Ncolors[j]++; /* OK, apply the increment */ - total_colors = (int) temp; - changed = TRUE; - } - } while (changed); - - return total_colors; -} - - -LOCAL(int) -output_value (j_decompress_ptr cinfo, int ci, int j, int maxj) -/* Return j'th output value, where j will range from 0 to maxj */ -/* The output values must fall in 0..MAXJSAMPLE in increasing order */ -{ - /* We always provide values 0 and MAXJSAMPLE for each component; - * any additional values are equally spaced between these limits. - * (Forcing the upper and lower values to the limits ensures that - * dithering can't produce a color outside the selected gamut.) - */ - return (int) (((INT32) j * MAXJSAMPLE + maxj/2) / maxj); -} - - -LOCAL(int) -largest_input_value (j_decompress_ptr cinfo, int ci, int j, int maxj) -/* Return largest input value that should map to j'th output value */ -/* Must have largest(j=0) >= 0, and largest(j=maxj) >= MAXJSAMPLE */ -{ - /* Breakpoints are halfway between values returned by output_value */ - return (int) (((INT32) (2*j + 1) * MAXJSAMPLE + maxj) / (2*maxj)); -} - - -/* - * Create the colormap. - */ - -LOCAL(void) -create_colormap (j_decompress_ptr cinfo) -{ - my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; - JSAMPARRAY colormap; /* Created colormap */ - int total_colors; /* Number of distinct output colors */ - int i,j,k, nci, blksize, blkdist, ptr, val; - - /* Select number of colors for each component */ - total_colors = select_ncolors(cinfo, cquantize->Ncolors); - - /* Report selected color counts */ - if (cinfo->out_color_components == 3) - TRACEMS4(cinfo, 1, JTRC_QUANT_3_NCOLORS, - total_colors, cquantize->Ncolors[0], - cquantize->Ncolors[1], cquantize->Ncolors[2]); - else - TRACEMS1(cinfo, 1, JTRC_QUANT_NCOLORS, total_colors); - - /* Allocate and fill in the colormap. */ - /* The colors are ordered in the map in standard row-major order, */ - /* i.e. rightmost (highest-indexed) color changes most rapidly. */ - - colormap = (*cinfo->mem->alloc_sarray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, - (JDIMENSION) total_colors, (JDIMENSION) cinfo->out_color_components); - - /* blksize is number of adjacent repeated entries for a component */ - /* blkdist is distance between groups of identical entries for a component */ - blkdist = total_colors; - - for (i = 0; i < cinfo->out_color_components; i++) { - /* fill in colormap entries for i'th color component */ - nci = cquantize->Ncolors[i]; /* # of distinct values for this color */ - blksize = blkdist / nci; - for (j = 0; j < nci; j++) { - /* Compute j'th output value (out of nci) for component */ - val = output_value(cinfo, i, j, nci-1); - /* Fill in all colormap entries that have this value of this component */ - for (ptr = j * blksize; ptr < total_colors; ptr += blkdist) { - /* fill in blksize entries beginning at ptr */ - for (k = 0; k < blksize; k++) - colormap[i][ptr+k] = (JSAMPLE) val; - } - } - blkdist = blksize; /* blksize of this color is blkdist of next */ - } - - /* Save the colormap in private storage, - * where it will survive color quantization mode changes. - */ - cquantize->sv_colormap = colormap; - cquantize->sv_actual = total_colors; -} - - -/* - * Create the color index table. - */ - -LOCAL(void) -create_colorindex (j_decompress_ptr cinfo) -{ - my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; - JSAMPROW indexptr; - int i,j,k, nci, blksize, val, pad; - - /* For ordered dither, we pad the color index tables by MAXJSAMPLE in - * each direction (input index values can be -MAXJSAMPLE .. 2*MAXJSAMPLE). - * This is not necessary in the other dithering modes. However, we - * flag whether it was done in case user changes dithering mode. - */ - if (cinfo->dither_mode == JDITHER_ORDERED) { - pad = MAXJSAMPLE*2; - cquantize->is_padded = TRUE; - } else { - pad = 0; - cquantize->is_padded = FALSE; - } - - cquantize->colorindex = (*cinfo->mem->alloc_sarray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, - (JDIMENSION) (MAXJSAMPLE+1 + pad), - (JDIMENSION) cinfo->out_color_components); - - /* blksize is number of adjacent repeated entries for a component */ - blksize = cquantize->sv_actual; - - for (i = 0; i < cinfo->out_color_components; i++) { - /* fill in colorindex entries for i'th color component */ - nci = cquantize->Ncolors[i]; /* # of distinct values for this color */ - blksize = blksize / nci; - - /* adjust colorindex pointers to provide padding at negative indexes. */ - if (pad) - cquantize->colorindex[i] += MAXJSAMPLE; - - /* in loop, val = index of current output value, */ - /* and k = largest j that maps to current val */ - indexptr = cquantize->colorindex[i]; - val = 0; - k = largest_input_value(cinfo, i, 0, nci-1); - for (j = 0; j <= MAXJSAMPLE; j++) { - while (j > k) /* advance val if past boundary */ - k = largest_input_value(cinfo, i, ++val, nci-1); - /* premultiply so that no multiplication needed in main processing */ - indexptr[j] = (JSAMPLE) (val * blksize); - } - /* Pad at both ends if necessary */ - if (pad) - for (j = 1; j <= MAXJSAMPLE; j++) { - indexptr[-j] = indexptr[0]; - indexptr[MAXJSAMPLE+j] = indexptr[MAXJSAMPLE]; - } - } -} - - -/* - * Create an ordered-dither array for a component having ncolors - * distinct output values. - */ - -LOCAL(ODITHER_MATRIX_PTR) -make_odither_array (j_decompress_ptr cinfo, int ncolors) -{ - ODITHER_MATRIX_PTR odither; - int j,k; - INT32 num,den; - - odither = (ODITHER_MATRIX_PTR) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(ODITHER_MATRIX)); - /* The inter-value distance for this color is MAXJSAMPLE/(ncolors-1). - * Hence the dither value for the matrix cell with fill order f - * (f=0..N-1) should be (N-1-2*f)/(2*N) * MAXJSAMPLE/(ncolors-1). - * On 16-bit-int machine, be careful to avoid overflow. - */ - den = 2 * ODITHER_CELLS * ((INT32) (ncolors - 1)); - for (j = 0; j < ODITHER_SIZE; j++) { - for (k = 0; k < ODITHER_SIZE; k++) { - num = ((INT32) (ODITHER_CELLS-1 - 2*((int)base_dither_matrix[j][k]))) - * MAXJSAMPLE; - /* Ensure round towards zero despite C's lack of consistency - * about rounding negative values in integer division... - */ - odither[j][k] = (int) (num<0 ? -((-num)/den) : num/den); - } - } - return odither; -} - - -/* - * Create the ordered-dither tables. - * Components having the same number of representative colors may - * share a dither table. - */ - -LOCAL(void) -create_odither_tables (j_decompress_ptr cinfo) -{ - my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; - ODITHER_MATRIX_PTR odither; - int i, j, nci; - - for (i = 0; i < cinfo->out_color_components; i++) { - nci = cquantize->Ncolors[i]; /* # of distinct values for this color */ - odither = NULL; /* search for matching prior component */ - for (j = 0; j < i; j++) { - if (nci == cquantize->Ncolors[j]) { - odither = cquantize->odither[j]; - break; - } - } - if (odither == NULL) /* need a new table? */ - odither = make_odither_array(cinfo, nci); - cquantize->odither[i] = odither; - } -} - - -/* - * Map some rows of pixels to the output colormapped representation. - */ - -METHODDEF(void) -color_quantize (j_decompress_ptr cinfo, JSAMPARRAY input_buf, - JSAMPARRAY output_buf, int num_rows) -/* General case, no dithering */ -{ - my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; - JSAMPARRAY colorindex = cquantize->colorindex; - register int pixcode, ci; - register JSAMPROW ptrin, ptrout; - int row; - JDIMENSION col; - JDIMENSION width = cinfo->output_width; - register int nc = cinfo->out_color_components; - - for (row = 0; row < num_rows; row++) { - ptrin = input_buf[row]; - ptrout = output_buf[row]; - for (col = width; col > 0; col--) { - pixcode = 0; - for (ci = 0; ci < nc; ci++) { - pixcode += GETJSAMPLE(colorindex[ci][GETJSAMPLE(*ptrin++)]); - } - *ptrout++ = (JSAMPLE) pixcode; - } - } -} - - -METHODDEF(void) -color_quantize3 (j_decompress_ptr cinfo, JSAMPARRAY input_buf, - JSAMPARRAY output_buf, int num_rows) -/* Fast path for out_color_components==3, no dithering */ -{ - my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; - register int pixcode; - register JSAMPROW ptrin, ptrout; - JSAMPROW colorindex0 = cquantize->colorindex[0]; - JSAMPROW colorindex1 = cquantize->colorindex[1]; - JSAMPROW colorindex2 = cquantize->colorindex[2]; - int row; - JDIMENSION col; - JDIMENSION width = cinfo->output_width; - - for (row = 0; row < num_rows; row++) { - ptrin = input_buf[row]; - ptrout = output_buf[row]; - for (col = width; col > 0; col--) { - pixcode = GETJSAMPLE(colorindex0[GETJSAMPLE(*ptrin++)]); - pixcode += GETJSAMPLE(colorindex1[GETJSAMPLE(*ptrin++)]); - pixcode += GETJSAMPLE(colorindex2[GETJSAMPLE(*ptrin++)]); - *ptrout++ = (JSAMPLE) pixcode; - } - } -} - - -METHODDEF(void) -quantize_ord_dither (j_decompress_ptr cinfo, JSAMPARRAY input_buf, - JSAMPARRAY output_buf, int num_rows) -/* General case, with ordered dithering */ -{ - my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; - register JSAMPROW input_ptr; - register JSAMPROW output_ptr; - JSAMPROW colorindex_ci; - int * dither; /* points to active row of dither matrix */ - int row_index, col_index; /* current indexes into dither matrix */ - int nc = cinfo->out_color_components; - int ci; - int row; - JDIMENSION col; - JDIMENSION width = cinfo->output_width; - - for (row = 0; row < num_rows; row++) { - /* Initialize output values to 0 so can process components separately */ - FMEMZERO((void FAR *) output_buf[row], - (size_t) (width * SIZEOF(JSAMPLE))); - row_index = cquantize->row_index; - for (ci = 0; ci < nc; ci++) { - input_ptr = input_buf[row] + ci; - output_ptr = output_buf[row]; - colorindex_ci = cquantize->colorindex[ci]; - dither = cquantize->odither[ci][row_index]; - col_index = 0; - - for (col = width; col > 0; col--) { - /* Form pixel value + dither, range-limit to 0..MAXJSAMPLE, - * select output value, accumulate into output code for this pixel. - * Range-limiting need not be done explicitly, as we have extended - * the colorindex table to produce the right answers for out-of-range - * inputs. The maximum dither is +- MAXJSAMPLE; this sets the - * required amount of padding. - */ - *output_ptr += colorindex_ci[GETJSAMPLE(*input_ptr)+dither[col_index]]; - input_ptr += nc; - output_ptr++; - col_index = (col_index + 1) & ODITHER_MASK; - } - } - /* Advance row index for next row */ - row_index = (row_index + 1) & ODITHER_MASK; - cquantize->row_index = row_index; - } -} - - -METHODDEF(void) -quantize3_ord_dither (j_decompress_ptr cinfo, JSAMPARRAY input_buf, - JSAMPARRAY output_buf, int num_rows) -/* Fast path for out_color_components==3, with ordered dithering */ -{ - my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; - register int pixcode; - register JSAMPROW input_ptr; - register JSAMPROW output_ptr; - JSAMPROW colorindex0 = cquantize->colorindex[0]; - JSAMPROW colorindex1 = cquantize->colorindex[1]; - JSAMPROW colorindex2 = cquantize->colorindex[2]; - int * dither0; /* points to active row of dither matrix */ - int * dither1; - int * dither2; - int row_index, col_index; /* current indexes into dither matrix */ - int row; - JDIMENSION col; - JDIMENSION width = cinfo->output_width; - - for (row = 0; row < num_rows; row++) { - row_index = cquantize->row_index; - input_ptr = input_buf[row]; - output_ptr = output_buf[row]; - dither0 = cquantize->odither[0][row_index]; - dither1 = cquantize->odither[1][row_index]; - dither2 = cquantize->odither[2][row_index]; - col_index = 0; - - for (col = width; col > 0; col--) { - pixcode = GETJSAMPLE(colorindex0[GETJSAMPLE(*input_ptr++) + - dither0[col_index]]); - pixcode += GETJSAMPLE(colorindex1[GETJSAMPLE(*input_ptr++) + - dither1[col_index]]); - pixcode += GETJSAMPLE(colorindex2[GETJSAMPLE(*input_ptr++) + - dither2[col_index]]); - *output_ptr++ = (JSAMPLE) pixcode; - col_index = (col_index + 1) & ODITHER_MASK; - } - row_index = (row_index + 1) & ODITHER_MASK; - cquantize->row_index = row_index; - } -} - - -METHODDEF(void) -quantize_fs_dither (j_decompress_ptr cinfo, JSAMPARRAY input_buf, - JSAMPARRAY output_buf, int num_rows) -/* General case, with Floyd-Steinberg dithering */ -{ - my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; - register LOCFSERROR cur; /* current error or pixel value */ - LOCFSERROR belowerr; /* error for pixel below cur */ - LOCFSERROR bpreverr; /* error for below/prev col */ - LOCFSERROR bnexterr; /* error for below/next col */ - LOCFSERROR delta; - register FSERRPTR errorptr; /* => fserrors[] at column before current */ - register JSAMPROW input_ptr; - register JSAMPROW output_ptr; - JSAMPROW colorindex_ci; - JSAMPROW colormap_ci; - int pixcode; - int nc = cinfo->out_color_components; - int dir; /* 1 for left-to-right, -1 for right-to-left */ - int dirnc; /* dir * nc */ - int ci; - int row; - JDIMENSION col; - JDIMENSION width = cinfo->output_width; - JSAMPLE *range_limit = cinfo->sample_range_limit; - SHIFT_TEMPS - - for (row = 0; row < num_rows; row++) { - /* Initialize output values to 0 so can process components separately */ - FMEMZERO((void FAR *) output_buf[row], - (size_t) (width * SIZEOF(JSAMPLE))); - for (ci = 0; ci < nc; ci++) { - input_ptr = input_buf[row] + ci; - output_ptr = output_buf[row]; - if (cquantize->on_odd_row) { - /* work right to left in this row */ - input_ptr += (width-1) * nc; /* so point to rightmost pixel */ - output_ptr += width-1; - dir = -1; - dirnc = -nc; - errorptr = cquantize->fserrors[ci] + (width+1); /* => entry after last column */ - } else { - /* work left to right in this row */ - dir = 1; - dirnc = nc; - errorptr = cquantize->fserrors[ci]; /* => entry before first column */ - } - colorindex_ci = cquantize->colorindex[ci]; - colormap_ci = cquantize->sv_colormap[ci]; - /* Preset error values: no error propagated to first pixel from left */ - cur = 0; - /* and no error propagated to row below yet */ - belowerr = bpreverr = 0; - - for (col = width; col > 0; col--) { - /* cur holds the error propagated from the previous pixel on the - * current line. Add the error propagated from the previous line - * to form the complete error correction term for this pixel, and - * round the error term (which is expressed * 16) to an integer. - * RIGHT_SHIFT rounds towards minus infinity, so adding 8 is correct - * for either sign of the error value. - * Note: errorptr points to *previous* column's array entry. - */ - cur = RIGHT_SHIFT(cur + errorptr[dir] + 8, 4); - /* Form pixel value + error, and range-limit to 0..MAXJSAMPLE. - * The maximum error is +- MAXJSAMPLE; this sets the required size - * of the range_limit array. - */ - cur += GETJSAMPLE(*input_ptr); - cur = GETJSAMPLE(range_limit[cur]); - /* Select output value, accumulate into output code for this pixel */ - pixcode = GETJSAMPLE(colorindex_ci[cur]); - *output_ptr += (JSAMPLE) pixcode; - /* Compute actual representation error at this pixel */ - /* Note: we can do this even though we don't have the final */ - /* pixel code, because the colormap is orthogonal. */ - cur -= GETJSAMPLE(colormap_ci[pixcode]); - /* Compute error fractions to be propagated to adjacent pixels. - * Add these into the running sums, and simultaneously shift the - * next-line error sums left by 1 column. - */ - bnexterr = cur; - delta = cur * 2; - cur += delta; /* form error * 3 */ - errorptr[0] = (FSERROR) (bpreverr + cur); - cur += delta; /* form error * 5 */ - bpreverr = belowerr + cur; - belowerr = bnexterr; - cur += delta; /* form error * 7 */ - /* At this point cur contains the 7/16 error value to be propagated - * to the next pixel on the current line, and all the errors for the - * next line have been shifted over. We are therefore ready to move on. - */ - input_ptr += dirnc; /* advance input ptr to next column */ - output_ptr += dir; /* advance output ptr to next column */ - errorptr += dir; /* advance errorptr to current column */ - } - /* Post-loop cleanup: we must unload the final error value into the - * final fserrors[] entry. Note we need not unload belowerr because - * it is for the dummy column before or after the actual array. - */ - errorptr[0] = (FSERROR) bpreverr; /* unload prev err into array */ - } - cquantize->on_odd_row = (cquantize->on_odd_row ? FALSE : TRUE); - } -} - - -/* - * Allocate workspace for Floyd-Steinberg errors. - */ - -LOCAL(void) -alloc_fs_workspace (j_decompress_ptr cinfo) -{ - my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; - size_t arraysize; - int i; - - arraysize = (size_t) ((cinfo->output_width + 2) * SIZEOF(FSERROR)); - for (i = 0; i < cinfo->out_color_components; i++) { - cquantize->fserrors[i] = (FSERRPTR) - (*cinfo->mem->alloc_large)((j_common_ptr) cinfo, JPOOL_IMAGE, arraysize); - } -} - - -/* - * Initialize for one-pass color quantization. - */ - -METHODDEF(void) -start_pass_1_quant (j_decompress_ptr cinfo, boolean is_pre_scan) -{ - my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; - size_t arraysize; - int i; - - /* Install my colormap. */ - cinfo->colormap = cquantize->sv_colormap; - cinfo->actual_number_of_colors = cquantize->sv_actual; - - /* Initialize for desired dithering mode. */ - switch (cinfo->dither_mode) { - case JDITHER_NONE: - if (cinfo->out_color_components == 3) - cquantize->pub.color_quantize = color_quantize3; - else - cquantize->pub.color_quantize = color_quantize; - break; - case JDITHER_ORDERED: - if (cinfo->out_color_components == 3) - cquantize->pub.color_quantize = quantize3_ord_dither; - else - cquantize->pub.color_quantize = quantize_ord_dither; - cquantize->row_index = 0; /* initialize state for ordered dither */ - /* If user changed to ordered dither from another mode, - * we must recreate the color index table with padding. - * This will cost extra space, but probably isn't very likely. - */ - if (! cquantize->is_padded) - create_colorindex(cinfo); - /* Create ordered-dither tables if we didn't already. */ - if (cquantize->odither[0] == NULL) - create_odither_tables(cinfo); - break; - case JDITHER_FS: - cquantize->pub.color_quantize = quantize_fs_dither; - cquantize->on_odd_row = FALSE; /* initialize state for F-S dither */ - /* Allocate Floyd-Steinberg workspace if didn't already. */ - if (cquantize->fserrors[0] == NULL) - alloc_fs_workspace(cinfo); - /* Initialize the propagated errors to zero. */ - arraysize = (size_t) ((cinfo->output_width + 2) * SIZEOF(FSERROR)); - for (i = 0; i < cinfo->out_color_components; i++) - FMEMZERO((void FAR *) cquantize->fserrors[i], arraysize); - break; - default: - ERREXIT(cinfo, JERR_NOT_COMPILED); - break; - } -} - - -/* - * Finish up at the end of the pass. - */ - -METHODDEF(void) -finish_pass_1_quant (j_decompress_ptr cinfo) -{ - /* no work in 1-pass case */ -} - - -/* - * Switch to a new external colormap between output passes. - * Shouldn't get to this module! - */ - -METHODDEF(void) -new_color_map_1_quant (j_decompress_ptr cinfo) -{ - ERREXIT(cinfo, JERR_MODE_CHANGE); -} - - -/* - * Module initialization routine for 1-pass color quantization. - */ - -GLOBAL(void) -jinit_1pass_quantizer (j_decompress_ptr cinfo) -{ - my_cquantize_ptr cquantize; - - cquantize = (my_cquantize_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(my_cquantizer)); - cinfo->cquantize = (struct jpeg_color_quantizer *) cquantize; - cquantize->pub.start_pass = start_pass_1_quant; - cquantize->pub.finish_pass = finish_pass_1_quant; - cquantize->pub.new_color_map = new_color_map_1_quant; - cquantize->fserrors[0] = NULL; /* Flag FS workspace not allocated */ - cquantize->odither[0] = NULL; /* Also flag odither arrays not allocated */ - - /* Make sure my internal arrays won't overflow */ - if (cinfo->out_color_components > MAX_Q_COMPS) - ERREXIT1(cinfo, JERR_QUANT_COMPONENTS, MAX_Q_COMPS); - /* Make sure colormap indexes can be represented by JSAMPLEs */ - if (cinfo->desired_number_of_colors > (MAXJSAMPLE+1)) - ERREXIT1(cinfo, JERR_QUANT_MANY_COLORS, MAXJSAMPLE+1); - - /* Create the colormap and color index table. */ - create_colormap(cinfo); - create_colorindex(cinfo); - - /* Allocate Floyd-Steinberg workspace now if requested. - * We do this now since it is FAR storage and may affect the memory - * manager's space calculations. If the user changes to FS dither - * mode in a later pass, we will allocate the space then, and will - * possibly overrun the max_memory_to_use setting. - */ - if (cinfo->dither_mode == JDITHER_FS) - alloc_fs_workspace(cinfo); -} - -#endif /* QUANT_1PASS_SUPPORTED */ diff --git a/jpeg/jquant2.c b/jpeg/jquant2.c deleted file mode 100755 index 38fc2af..0000000 --- a/jpeg/jquant2.c +++ /dev/null @@ -1,1311 +0,0 @@ -/* - * jquant2.c - * - * Copyright (C) 1991-1996, Thomas G. Lane. - * Modified 2011 by Guido Vollbeding. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains 2-pass color quantization (color mapping) routines. - * These routines provide selection of a custom color map for an image, - * followed by mapping of the image to that color map, with optional - * Floyd-Steinberg dithering. - * It is also possible to use just the second pass to map to an arbitrary - * externally-given color map. - * - * Note: ordered dithering is not supported, since there isn't any fast - * way to compute intercolor distances; it's unclear that ordered dither's - * fundamental assumptions even hold with an irregularly spaced color map. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - -#ifdef QUANT_2PASS_SUPPORTED - - -/* - * This module implements the well-known Heckbert paradigm for color - * quantization. Most of the ideas used here can be traced back to - * Heckbert's seminal paper - * Heckbert, Paul. "Color Image Quantization for Frame Buffer Display", - * Proc. SIGGRAPH '82, Computer Graphics v.16 #3 (July 1982), pp 297-304. - * - * In the first pass over the image, we accumulate a histogram showing the - * usage count of each possible color. To keep the histogram to a reasonable - * size, we reduce the precision of the input; typical practice is to retain - * 5 or 6 bits per color, so that 8 or 4 different input values are counted - * in the same histogram cell. - * - * Next, the color-selection step begins with a box representing the whole - * color space, and repeatedly splits the "largest" remaining box until we - * have as many boxes as desired colors. Then the mean color in each - * remaining box becomes one of the possible output colors. - * - * The second pass over the image maps each input pixel to the closest output - * color (optionally after applying a Floyd-Steinberg dithering correction). - * This mapping is logically trivial, but making it go fast enough requires - * considerable care. - * - * Heckbert-style quantizers vary a good deal in their policies for choosing - * the "largest" box and deciding where to cut it. The particular policies - * used here have proved out well in experimental comparisons, but better ones - * may yet be found. - * - * In earlier versions of the IJG code, this module quantized in YCbCr color - * space, processing the raw upsampled data without a color conversion step. - * This allowed the color conversion math to be done only once per colormap - * entry, not once per pixel. However, that optimization precluded other - * useful optimizations (such as merging color conversion with upsampling) - * and it also interfered with desired capabilities such as quantizing to an - * externally-supplied colormap. We have therefore abandoned that approach. - * The present code works in the post-conversion color space, typically RGB. - * - * To improve the visual quality of the results, we actually work in scaled - * RGB space, giving G distances more weight than R, and R in turn more than - * B. To do everything in integer math, we must use integer scale factors. - * The 2/3/1 scale factors used here correspond loosely to the relative - * weights of the colors in the NTSC grayscale equation. - * If you want to use this code to quantize a non-RGB color space, you'll - * probably need to change these scale factors. - */ - -#define R_SCALE 2 /* scale R distances by this much */ -#define G_SCALE 3 /* scale G distances by this much */ -#define B_SCALE 1 /* and B by this much */ - -/* Relabel R/G/B as components 0/1/2, respecting the RGB ordering defined - * in jmorecfg.h. As the code stands, it will do the right thing for R,G,B - * and B,G,R orders. If you define some other weird order in jmorecfg.h, - * you'll get compile errors until you extend this logic. In that case - * you'll probably want to tweak the histogram sizes too. - */ - -#if RGB_RED == 0 -#define C0_SCALE R_SCALE -#endif -#if RGB_BLUE == 0 -#define C0_SCALE B_SCALE -#endif -#if RGB_GREEN == 1 -#define C1_SCALE G_SCALE -#endif -#if RGB_RED == 2 -#define C2_SCALE R_SCALE -#endif -#if RGB_BLUE == 2 -#define C2_SCALE B_SCALE -#endif - - -/* - * First we have the histogram data structure and routines for creating it. - * - * The number of bits of precision can be adjusted by changing these symbols. - * We recommend keeping 6 bits for G and 5 each for R and B. - * If you have plenty of memory and cycles, 6 bits all around gives marginally - * better results; if you are short of memory, 5 bits all around will save - * some space but degrade the results. - * To maintain a fully accurate histogram, we'd need to allocate a "long" - * (preferably unsigned long) for each cell. In practice this is overkill; - * we can get by with 16 bits per cell. Few of the cell counts will overflow, - * and clamping those that do overflow to the maximum value will give close- - * enough results. This reduces the recommended histogram size from 256Kb - * to 128Kb, which is a useful savings on PC-class machines. - * (In the second pass the histogram space is re-used for pixel mapping data; - * in that capacity, each cell must be able to store zero to the number of - * desired colors. 16 bits/cell is plenty for that too.) - * Since the JPEG code is intended to run in small memory model on 80x86 - * machines, we can't just allocate the histogram in one chunk. Instead - * of a true 3-D array, we use a row of pointers to 2-D arrays. Each - * pointer corresponds to a C0 value (typically 2^5 = 32 pointers) and - * each 2-D array has 2^6*2^5 = 2048 or 2^6*2^6 = 4096 entries. Note that - * on 80x86 machines, the pointer row is in near memory but the actual - * arrays are in far memory (same arrangement as we use for image arrays). - */ - -#define MAXNUMCOLORS (MAXJSAMPLE+1) /* maximum size of colormap */ - -/* These will do the right thing for either R,G,B or B,G,R color order, - * but you may not like the results for other color orders. - */ -#define HIST_C0_BITS 5 /* bits of precision in R/B histogram */ -#define HIST_C1_BITS 6 /* bits of precision in G histogram */ -#define HIST_C2_BITS 5 /* bits of precision in B/R histogram */ - -/* Number of elements along histogram axes. */ -#define HIST_C0_ELEMS (1<cquantize; - register JSAMPROW ptr; - register histptr histp; - register hist3d histogram = cquantize->histogram; - int row; - JDIMENSION col; - JDIMENSION width = cinfo->output_width; - - for (row = 0; row < num_rows; row++) { - ptr = input_buf[row]; - for (col = width; col > 0; col--) { - /* get pixel value and index into the histogram */ - histp = & histogram[GETJSAMPLE(ptr[0]) >> C0_SHIFT] - [GETJSAMPLE(ptr[1]) >> C1_SHIFT] - [GETJSAMPLE(ptr[2]) >> C2_SHIFT]; - /* increment, check for overflow and undo increment if so. */ - if (++(*histp) <= 0) - (*histp)--; - ptr += 3; - } - } -} - - -/* - * Next we have the really interesting routines: selection of a colormap - * given the completed histogram. - * These routines work with a list of "boxes", each representing a rectangular - * subset of the input color space (to histogram precision). - */ - -typedef struct { - /* The bounds of the box (inclusive); expressed as histogram indexes */ - int c0min, c0max; - int c1min, c1max; - int c2min, c2max; - /* The volume (actually 2-norm) of the box */ - INT32 volume; - /* The number of nonzero histogram cells within this box */ - long colorcount; -} box; - -typedef box * boxptr; - - -LOCAL(boxptr) -find_biggest_color_pop (boxptr boxlist, int numboxes) -/* Find the splittable box with the largest color population */ -/* Returns NULL if no splittable boxes remain */ -{ - register boxptr boxp; - register int i; - register long maxc = 0; - boxptr which = NULL; - - for (i = 0, boxp = boxlist; i < numboxes; i++, boxp++) { - if (boxp->colorcount > maxc && boxp->volume > 0) { - which = boxp; - maxc = boxp->colorcount; - } - } - return which; -} - - -LOCAL(boxptr) -find_biggest_volume (boxptr boxlist, int numboxes) -/* Find the splittable box with the largest (scaled) volume */ -/* Returns NULL if no splittable boxes remain */ -{ - register boxptr boxp; - register int i; - register INT32 maxv = 0; - boxptr which = NULL; - - for (i = 0, boxp = boxlist; i < numboxes; i++, boxp++) { - if (boxp->volume > maxv) { - which = boxp; - maxv = boxp->volume; - } - } - return which; -} - - -LOCAL(void) -update_box (j_decompress_ptr cinfo, boxptr boxp) -/* Shrink the min/max bounds of a box to enclose only nonzero elements, */ -/* and recompute its volume and population */ -{ - my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; - hist3d histogram = cquantize->histogram; - histptr histp; - int c0,c1,c2; - int c0min,c0max,c1min,c1max,c2min,c2max; - INT32 dist0,dist1,dist2; - long ccount; - - c0min = boxp->c0min; c0max = boxp->c0max; - c1min = boxp->c1min; c1max = boxp->c1max; - c2min = boxp->c2min; c2max = boxp->c2max; - - if (c0max > c0min) - for (c0 = c0min; c0 <= c0max; c0++) - for (c1 = c1min; c1 <= c1max; c1++) { - histp = & histogram[c0][c1][c2min]; - for (c2 = c2min; c2 <= c2max; c2++) - if (*histp++ != 0) { - boxp->c0min = c0min = c0; - goto have_c0min; - } - } - have_c0min: - if (c0max > c0min) - for (c0 = c0max; c0 >= c0min; c0--) - for (c1 = c1min; c1 <= c1max; c1++) { - histp = & histogram[c0][c1][c2min]; - for (c2 = c2min; c2 <= c2max; c2++) - if (*histp++ != 0) { - boxp->c0max = c0max = c0; - goto have_c0max; - } - } - have_c0max: - if (c1max > c1min) - for (c1 = c1min; c1 <= c1max; c1++) - for (c0 = c0min; c0 <= c0max; c0++) { - histp = & histogram[c0][c1][c2min]; - for (c2 = c2min; c2 <= c2max; c2++) - if (*histp++ != 0) { - boxp->c1min = c1min = c1; - goto have_c1min; - } - } - have_c1min: - if (c1max > c1min) - for (c1 = c1max; c1 >= c1min; c1--) - for (c0 = c0min; c0 <= c0max; c0++) { - histp = & histogram[c0][c1][c2min]; - for (c2 = c2min; c2 <= c2max; c2++) - if (*histp++ != 0) { - boxp->c1max = c1max = c1; - goto have_c1max; - } - } - have_c1max: - if (c2max > c2min) - for (c2 = c2min; c2 <= c2max; c2++) - for (c0 = c0min; c0 <= c0max; c0++) { - histp = & histogram[c0][c1min][c2]; - for (c1 = c1min; c1 <= c1max; c1++, histp += HIST_C2_ELEMS) - if (*histp != 0) { - boxp->c2min = c2min = c2; - goto have_c2min; - } - } - have_c2min: - if (c2max > c2min) - for (c2 = c2max; c2 >= c2min; c2--) - for (c0 = c0min; c0 <= c0max; c0++) { - histp = & histogram[c0][c1min][c2]; - for (c1 = c1min; c1 <= c1max; c1++, histp += HIST_C2_ELEMS) - if (*histp != 0) { - boxp->c2max = c2max = c2; - goto have_c2max; - } - } - have_c2max: - - /* Update box volume. - * We use 2-norm rather than real volume here; this biases the method - * against making long narrow boxes, and it has the side benefit that - * a box is splittable iff norm > 0. - * Since the differences are expressed in histogram-cell units, - * we have to shift back to JSAMPLE units to get consistent distances; - * after which, we scale according to the selected distance scale factors. - */ - dist0 = ((c0max - c0min) << C0_SHIFT) * C0_SCALE; - dist1 = ((c1max - c1min) << C1_SHIFT) * C1_SCALE; - dist2 = ((c2max - c2min) << C2_SHIFT) * C2_SCALE; - boxp->volume = dist0*dist0 + dist1*dist1 + dist2*dist2; - - /* Now scan remaining volume of box and compute population */ - ccount = 0; - for (c0 = c0min; c0 <= c0max; c0++) - for (c1 = c1min; c1 <= c1max; c1++) { - histp = & histogram[c0][c1][c2min]; - for (c2 = c2min; c2 <= c2max; c2++, histp++) - if (*histp != 0) { - ccount++; - } - } - boxp->colorcount = ccount; -} - - -LOCAL(int) -median_cut (j_decompress_ptr cinfo, boxptr boxlist, int numboxes, - int desired_colors) -/* Repeatedly select and split the largest box until we have enough boxes */ -{ - int n,lb; - int c0,c1,c2,cmax; - register boxptr b1,b2; - - while (numboxes < desired_colors) { - /* Select box to split. - * Current algorithm: by population for first half, then by volume. - */ - if (numboxes*2 <= desired_colors) { - b1 = find_biggest_color_pop(boxlist, numboxes); - } else { - b1 = find_biggest_volume(boxlist, numboxes); - } - if (b1 == NULL) /* no splittable boxes left! */ - break; - b2 = &boxlist[numboxes]; /* where new box will go */ - /* Copy the color bounds to the new box. */ - b2->c0max = b1->c0max; b2->c1max = b1->c1max; b2->c2max = b1->c2max; - b2->c0min = b1->c0min; b2->c1min = b1->c1min; b2->c2min = b1->c2min; - /* Choose which axis to split the box on. - * Current algorithm: longest scaled axis. - * See notes in update_box about scaling distances. - */ - c0 = ((b1->c0max - b1->c0min) << C0_SHIFT) * C0_SCALE; - c1 = ((b1->c1max - b1->c1min) << C1_SHIFT) * C1_SCALE; - c2 = ((b1->c2max - b1->c2min) << C2_SHIFT) * C2_SCALE; - /* We want to break any ties in favor of green, then red, blue last. - * This code does the right thing for R,G,B or B,G,R color orders only. - */ -#if RGB_RED == 0 - cmax = c1; n = 1; - if (c0 > cmax) { cmax = c0; n = 0; } - if (c2 > cmax) { n = 2; } -#else - cmax = c1; n = 1; - if (c2 > cmax) { cmax = c2; n = 2; } - if (c0 > cmax) { n = 0; } -#endif - /* Choose split point along selected axis, and update box bounds. - * Current algorithm: split at halfway point. - * (Since the box has been shrunk to minimum volume, - * any split will produce two nonempty subboxes.) - * Note that lb value is max for lower box, so must be < old max. - */ - switch (n) { - case 0: - lb = (b1->c0max + b1->c0min) / 2; - b1->c0max = lb; - b2->c0min = lb+1; - break; - case 1: - lb = (b1->c1max + b1->c1min) / 2; - b1->c1max = lb; - b2->c1min = lb+1; - break; - case 2: - lb = (b1->c2max + b1->c2min) / 2; - b1->c2max = lb; - b2->c2min = lb+1; - break; - } - /* Update stats for boxes */ - update_box(cinfo, b1); - update_box(cinfo, b2); - numboxes++; - } - return numboxes; -} - - -LOCAL(void) -compute_color (j_decompress_ptr cinfo, boxptr boxp, int icolor) -/* Compute representative color for a box, put it in colormap[icolor] */ -{ - /* Current algorithm: mean weighted by pixels (not colors) */ - /* Note it is important to get the rounding correct! */ - my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; - hist3d histogram = cquantize->histogram; - histptr histp; - int c0,c1,c2; - int c0min,c0max,c1min,c1max,c2min,c2max; - long count; - long total = 0; - long c0total = 0; - long c1total = 0; - long c2total = 0; - - c0min = boxp->c0min; c0max = boxp->c0max; - c1min = boxp->c1min; c1max = boxp->c1max; - c2min = boxp->c2min; c2max = boxp->c2max; - - for (c0 = c0min; c0 <= c0max; c0++) - for (c1 = c1min; c1 <= c1max; c1++) { - histp = & histogram[c0][c1][c2min]; - for (c2 = c2min; c2 <= c2max; c2++) { - if ((count = *histp++) != 0) { - total += count; - c0total += ((c0 << C0_SHIFT) + ((1<>1)) * count; - c1total += ((c1 << C1_SHIFT) + ((1<>1)) * count; - c2total += ((c2 << C2_SHIFT) + ((1<>1)) * count; - } - } - } - - cinfo->colormap[0][icolor] = (JSAMPLE) ((c0total + (total>>1)) / total); - cinfo->colormap[1][icolor] = (JSAMPLE) ((c1total + (total>>1)) / total); - cinfo->colormap[2][icolor] = (JSAMPLE) ((c2total + (total>>1)) / total); -} - - -LOCAL(void) -select_colors (j_decompress_ptr cinfo, int desired_colors) -/* Master routine for color selection */ -{ - boxptr boxlist; - int numboxes; - int i; - - /* Allocate workspace for box list */ - boxlist = (boxptr) (*cinfo->mem->alloc_small) - ((j_common_ptr) cinfo, JPOOL_IMAGE, desired_colors * SIZEOF(box)); - /* Initialize one box containing whole space */ - numboxes = 1; - boxlist[0].c0min = 0; - boxlist[0].c0max = MAXJSAMPLE >> C0_SHIFT; - boxlist[0].c1min = 0; - boxlist[0].c1max = MAXJSAMPLE >> C1_SHIFT; - boxlist[0].c2min = 0; - boxlist[0].c2max = MAXJSAMPLE >> C2_SHIFT; - /* Shrink it to actually-used volume and set its statistics */ - update_box(cinfo, & boxlist[0]); - /* Perform median-cut to produce final box list */ - numboxes = median_cut(cinfo, boxlist, numboxes, desired_colors); - /* Compute the representative color for each box, fill colormap */ - for (i = 0; i < numboxes; i++) - compute_color(cinfo, & boxlist[i], i); - cinfo->actual_number_of_colors = numboxes; - TRACEMS1(cinfo, 1, JTRC_QUANT_SELECTED, numboxes); -} - - -/* - * These routines are concerned with the time-critical task of mapping input - * colors to the nearest color in the selected colormap. - * - * We re-use the histogram space as an "inverse color map", essentially a - * cache for the results of nearest-color searches. All colors within a - * histogram cell will be mapped to the same colormap entry, namely the one - * closest to the cell's center. This may not be quite the closest entry to - * the actual input color, but it's almost as good. A zero in the cache - * indicates we haven't found the nearest color for that cell yet; the array - * is cleared to zeroes before starting the mapping pass. When we find the - * nearest color for a cell, its colormap index plus one is recorded in the - * cache for future use. The pass2 scanning routines call fill_inverse_cmap - * when they need to use an unfilled entry in the cache. - * - * Our method of efficiently finding nearest colors is based on the "locally - * sorted search" idea described by Heckbert and on the incremental distance - * calculation described by Spencer W. Thomas in chapter III.1 of Graphics - * Gems II (James Arvo, ed. Academic Press, 1991). Thomas points out that - * the distances from a given colormap entry to each cell of the histogram can - * be computed quickly using an incremental method: the differences between - * distances to adjacent cells themselves differ by a constant. This allows a - * fairly fast implementation of the "brute force" approach of computing the - * distance from every colormap entry to every histogram cell. Unfortunately, - * it needs a work array to hold the best-distance-so-far for each histogram - * cell (because the inner loop has to be over cells, not colormap entries). - * The work array elements have to be INT32s, so the work array would need - * 256Kb at our recommended precision. This is not feasible in DOS machines. - * - * To get around these problems, we apply Thomas' method to compute the - * nearest colors for only the cells within a small subbox of the histogram. - * The work array need be only as big as the subbox, so the memory usage - * problem is solved. Furthermore, we need not fill subboxes that are never - * referenced in pass2; many images use only part of the color gamut, so a - * fair amount of work is saved. An additional advantage of this - * approach is that we can apply Heckbert's locality criterion to quickly - * eliminate colormap entries that are far away from the subbox; typically - * three-fourths of the colormap entries are rejected by Heckbert's criterion, - * and we need not compute their distances to individual cells in the subbox. - * The speed of this approach is heavily influenced by the subbox size: too - * small means too much overhead, too big loses because Heckbert's criterion - * can't eliminate as many colormap entries. Empirically the best subbox - * size seems to be about 1/512th of the histogram (1/8th in each direction). - * - * Thomas' article also describes a refined method which is asymptotically - * faster than the brute-force method, but it is also far more complex and - * cannot efficiently be applied to small subboxes. It is therefore not - * useful for programs intended to be portable to DOS machines. On machines - * with plenty of memory, filling the whole histogram in one shot with Thomas' - * refined method might be faster than the present code --- but then again, - * it might not be any faster, and it's certainly more complicated. - */ - - -/* log2(histogram cells in update box) for each axis; this can be adjusted */ -#define BOX_C0_LOG (HIST_C0_BITS-3) -#define BOX_C1_LOG (HIST_C1_BITS-3) -#define BOX_C2_LOG (HIST_C2_BITS-3) - -#define BOX_C0_ELEMS (1<actual_number_of_colors; - int maxc0, maxc1, maxc2; - int centerc0, centerc1, centerc2; - int i, x, ncolors; - INT32 minmaxdist, min_dist, max_dist, tdist; - INT32 mindist[MAXNUMCOLORS]; /* min distance to colormap entry i */ - - /* Compute true coordinates of update box's upper corner and center. - * Actually we compute the coordinates of the center of the upper-corner - * histogram cell, which are the upper bounds of the volume we care about. - * Note that since ">>" rounds down, the "center" values may be closer to - * min than to max; hence comparisons to them must be "<=", not "<". - */ - maxc0 = minc0 + ((1 << BOX_C0_SHIFT) - (1 << C0_SHIFT)); - centerc0 = (minc0 + maxc0) >> 1; - maxc1 = minc1 + ((1 << BOX_C1_SHIFT) - (1 << C1_SHIFT)); - centerc1 = (minc1 + maxc1) >> 1; - maxc2 = minc2 + ((1 << BOX_C2_SHIFT) - (1 << C2_SHIFT)); - centerc2 = (minc2 + maxc2) >> 1; - - /* For each color in colormap, find: - * 1. its minimum squared-distance to any point in the update box - * (zero if color is within update box); - * 2. its maximum squared-distance to any point in the update box. - * Both of these can be found by considering only the corners of the box. - * We save the minimum distance for each color in mindist[]; - * only the smallest maximum distance is of interest. - */ - minmaxdist = 0x7FFFFFFFL; - - for (i = 0; i < numcolors; i++) { - /* We compute the squared-c0-distance term, then add in the other two. */ - x = GETJSAMPLE(cinfo->colormap[0][i]); - if (x < minc0) { - tdist = (x - minc0) * C0_SCALE; - min_dist = tdist*tdist; - tdist = (x - maxc0) * C0_SCALE; - max_dist = tdist*tdist; - } else if (x > maxc0) { - tdist = (x - maxc0) * C0_SCALE; - min_dist = tdist*tdist; - tdist = (x - minc0) * C0_SCALE; - max_dist = tdist*tdist; - } else { - /* within cell range so no contribution to min_dist */ - min_dist = 0; - if (x <= centerc0) { - tdist = (x - maxc0) * C0_SCALE; - max_dist = tdist*tdist; - } else { - tdist = (x - minc0) * C0_SCALE; - max_dist = tdist*tdist; - } - } - - x = GETJSAMPLE(cinfo->colormap[1][i]); - if (x < minc1) { - tdist = (x - minc1) * C1_SCALE; - min_dist += tdist*tdist; - tdist = (x - maxc1) * C1_SCALE; - max_dist += tdist*tdist; - } else if (x > maxc1) { - tdist = (x - maxc1) * C1_SCALE; - min_dist += tdist*tdist; - tdist = (x - minc1) * C1_SCALE; - max_dist += tdist*tdist; - } else { - /* within cell range so no contribution to min_dist */ - if (x <= centerc1) { - tdist = (x - maxc1) * C1_SCALE; - max_dist += tdist*tdist; - } else { - tdist = (x - minc1) * C1_SCALE; - max_dist += tdist*tdist; - } - } - - x = GETJSAMPLE(cinfo->colormap[2][i]); - if (x < minc2) { - tdist = (x - minc2) * C2_SCALE; - min_dist += tdist*tdist; - tdist = (x - maxc2) * C2_SCALE; - max_dist += tdist*tdist; - } else if (x > maxc2) { - tdist = (x - maxc2) * C2_SCALE; - min_dist += tdist*tdist; - tdist = (x - minc2) * C2_SCALE; - max_dist += tdist*tdist; - } else { - /* within cell range so no contribution to min_dist */ - if (x <= centerc2) { - tdist = (x - maxc2) * C2_SCALE; - max_dist += tdist*tdist; - } else { - tdist = (x - minc2) * C2_SCALE; - max_dist += tdist*tdist; - } - } - - mindist[i] = min_dist; /* save away the results */ - if (max_dist < minmaxdist) - minmaxdist = max_dist; - } - - /* Now we know that no cell in the update box is more than minmaxdist - * away from some colormap entry. Therefore, only colors that are - * within minmaxdist of some part of the box need be considered. - */ - ncolors = 0; - for (i = 0; i < numcolors; i++) { - if (mindist[i] <= minmaxdist) - colorlist[ncolors++] = (JSAMPLE) i; - } - return ncolors; -} - - -LOCAL(void) -find_best_colors (j_decompress_ptr cinfo, int minc0, int minc1, int minc2, - int numcolors, JSAMPLE colorlist[], JSAMPLE bestcolor[]) -/* Find the closest colormap entry for each cell in the update box, - * given the list of candidate colors prepared by find_nearby_colors. - * Return the indexes of the closest entries in the bestcolor[] array. - * This routine uses Thomas' incremental distance calculation method to - * find the distance from a colormap entry to successive cells in the box. - */ -{ - int ic0, ic1, ic2; - int i, icolor; - register INT32 * bptr; /* pointer into bestdist[] array */ - JSAMPLE * cptr; /* pointer into bestcolor[] array */ - INT32 dist0, dist1; /* initial distance values */ - register INT32 dist2; /* current distance in inner loop */ - INT32 xx0, xx1; /* distance increments */ - register INT32 xx2; - INT32 inc0, inc1, inc2; /* initial values for increments */ - /* This array holds the distance to the nearest-so-far color for each cell */ - INT32 bestdist[BOX_C0_ELEMS * BOX_C1_ELEMS * BOX_C2_ELEMS]; - - /* Initialize best-distance for each cell of the update box */ - bptr = bestdist; - for (i = BOX_C0_ELEMS*BOX_C1_ELEMS*BOX_C2_ELEMS-1; i >= 0; i--) - *bptr++ = 0x7FFFFFFFL; - - /* For each color selected by find_nearby_colors, - * compute its distance to the center of each cell in the box. - * If that's less than best-so-far, update best distance and color number. - */ - - /* Nominal steps between cell centers ("x" in Thomas article) */ -#define STEP_C0 ((1 << C0_SHIFT) * C0_SCALE) -#define STEP_C1 ((1 << C1_SHIFT) * C1_SCALE) -#define STEP_C2 ((1 << C2_SHIFT) * C2_SCALE) - - for (i = 0; i < numcolors; i++) { - icolor = GETJSAMPLE(colorlist[i]); - /* Compute (square of) distance from minc0/c1/c2 to this color */ - inc0 = (minc0 - GETJSAMPLE(cinfo->colormap[0][icolor])) * C0_SCALE; - dist0 = inc0*inc0; - inc1 = (minc1 - GETJSAMPLE(cinfo->colormap[1][icolor])) * C1_SCALE; - dist0 += inc1*inc1; - inc2 = (minc2 - GETJSAMPLE(cinfo->colormap[2][icolor])) * C2_SCALE; - dist0 += inc2*inc2; - /* Form the initial difference increments */ - inc0 = inc0 * (2 * STEP_C0) + STEP_C0 * STEP_C0; - inc1 = inc1 * (2 * STEP_C1) + STEP_C1 * STEP_C1; - inc2 = inc2 * (2 * STEP_C2) + STEP_C2 * STEP_C2; - /* Now loop over all cells in box, updating distance per Thomas method */ - bptr = bestdist; - cptr = bestcolor; - xx0 = inc0; - for (ic0 = BOX_C0_ELEMS-1; ic0 >= 0; ic0--) { - dist1 = dist0; - xx1 = inc1; - for (ic1 = BOX_C1_ELEMS-1; ic1 >= 0; ic1--) { - dist2 = dist1; - xx2 = inc2; - for (ic2 = BOX_C2_ELEMS-1; ic2 >= 0; ic2--) { - if (dist2 < *bptr) { - *bptr = dist2; - *cptr = (JSAMPLE) icolor; - } - dist2 += xx2; - xx2 += 2 * STEP_C2 * STEP_C2; - bptr++; - cptr++; - } - dist1 += xx1; - xx1 += 2 * STEP_C1 * STEP_C1; - } - dist0 += xx0; - xx0 += 2 * STEP_C0 * STEP_C0; - } - } -} - - -LOCAL(void) -fill_inverse_cmap (j_decompress_ptr cinfo, int c0, int c1, int c2) -/* Fill the inverse-colormap entries in the update box that contains */ -/* histogram cell c0/c1/c2. (Only that one cell MUST be filled, but */ -/* we can fill as many others as we wish.) */ -{ - my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; - hist3d histogram = cquantize->histogram; - int minc0, minc1, minc2; /* lower left corner of update box */ - int ic0, ic1, ic2; - register JSAMPLE * cptr; /* pointer into bestcolor[] array */ - register histptr cachep; /* pointer into main cache array */ - /* This array lists the candidate colormap indexes. */ - JSAMPLE colorlist[MAXNUMCOLORS]; - int numcolors; /* number of candidate colors */ - /* This array holds the actually closest colormap index for each cell. */ - JSAMPLE bestcolor[BOX_C0_ELEMS * BOX_C1_ELEMS * BOX_C2_ELEMS]; - - /* Convert cell coordinates to update box ID */ - c0 >>= BOX_C0_LOG; - c1 >>= BOX_C1_LOG; - c2 >>= BOX_C2_LOG; - - /* Compute true coordinates of update box's origin corner. - * Actually we compute the coordinates of the center of the corner - * histogram cell, which are the lower bounds of the volume we care about. - */ - minc0 = (c0 << BOX_C0_SHIFT) + ((1 << C0_SHIFT) >> 1); - minc1 = (c1 << BOX_C1_SHIFT) + ((1 << C1_SHIFT) >> 1); - minc2 = (c2 << BOX_C2_SHIFT) + ((1 << C2_SHIFT) >> 1); - - /* Determine which colormap entries are close enough to be candidates - * for the nearest entry to some cell in the update box. - */ - numcolors = find_nearby_colors(cinfo, minc0, minc1, minc2, colorlist); - - /* Determine the actually nearest colors. */ - find_best_colors(cinfo, minc0, minc1, minc2, numcolors, colorlist, - bestcolor); - - /* Save the best color numbers (plus 1) in the main cache array */ - c0 <<= BOX_C0_LOG; /* convert ID back to base cell indexes */ - c1 <<= BOX_C1_LOG; - c2 <<= BOX_C2_LOG; - cptr = bestcolor; - for (ic0 = 0; ic0 < BOX_C0_ELEMS; ic0++) { - for (ic1 = 0; ic1 < BOX_C1_ELEMS; ic1++) { - cachep = & histogram[c0+ic0][c1+ic1][c2]; - for (ic2 = 0; ic2 < BOX_C2_ELEMS; ic2++) { - *cachep++ = (histcell) (GETJSAMPLE(*cptr++) + 1); - } - } - } -} - - -/* - * Map some rows of pixels to the output colormapped representation. - */ - -METHODDEF(void) -pass2_no_dither (j_decompress_ptr cinfo, - JSAMPARRAY input_buf, JSAMPARRAY output_buf, int num_rows) -/* This version performs no dithering */ -{ - my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; - hist3d histogram = cquantize->histogram; - register JSAMPROW inptr, outptr; - register histptr cachep; - register int c0, c1, c2; - int row; - JDIMENSION col; - JDIMENSION width = cinfo->output_width; - - for (row = 0; row < num_rows; row++) { - inptr = input_buf[row]; - outptr = output_buf[row]; - for (col = width; col > 0; col--) { - /* get pixel value and index into the cache */ - c0 = GETJSAMPLE(*inptr++) >> C0_SHIFT; - c1 = GETJSAMPLE(*inptr++) >> C1_SHIFT; - c2 = GETJSAMPLE(*inptr++) >> C2_SHIFT; - cachep = & histogram[c0][c1][c2]; - /* If we have not seen this color before, find nearest colormap entry */ - /* and update the cache */ - if (*cachep == 0) - fill_inverse_cmap(cinfo, c0,c1,c2); - /* Now emit the colormap index for this cell */ - *outptr++ = (JSAMPLE) (*cachep - 1); - } - } -} - - -METHODDEF(void) -pass2_fs_dither (j_decompress_ptr cinfo, - JSAMPARRAY input_buf, JSAMPARRAY output_buf, int num_rows) -/* This version performs Floyd-Steinberg dithering */ -{ - my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; - hist3d histogram = cquantize->histogram; - register LOCFSERROR cur0, cur1, cur2; /* current error or pixel value */ - LOCFSERROR belowerr0, belowerr1, belowerr2; /* error for pixel below cur */ - LOCFSERROR bpreverr0, bpreverr1, bpreverr2; /* error for below/prev col */ - register FSERRPTR errorptr; /* => fserrors[] at column before current */ - JSAMPROW inptr; /* => current input pixel */ - JSAMPROW outptr; /* => current output pixel */ - histptr cachep; - int dir; /* +1 or -1 depending on direction */ - int dir3; /* 3*dir, for advancing inptr & errorptr */ - int row; - JDIMENSION col; - JDIMENSION width = cinfo->output_width; - JSAMPLE *range_limit = cinfo->sample_range_limit; - int *error_limit = cquantize->error_limiter; - JSAMPROW colormap0 = cinfo->colormap[0]; - JSAMPROW colormap1 = cinfo->colormap[1]; - JSAMPROW colormap2 = cinfo->colormap[2]; - SHIFT_TEMPS - - for (row = 0; row < num_rows; row++) { - inptr = input_buf[row]; - outptr = output_buf[row]; - if (cquantize->on_odd_row) { - /* work right to left in this row */ - inptr += (width-1) * 3; /* so point to rightmost pixel */ - outptr += width-1; - dir = -1; - dir3 = -3; - errorptr = cquantize->fserrors + (width+1)*3; /* => entry after last column */ - cquantize->on_odd_row = FALSE; /* flip for next time */ - } else { - /* work left to right in this row */ - dir = 1; - dir3 = 3; - errorptr = cquantize->fserrors; /* => entry before first real column */ - cquantize->on_odd_row = TRUE; /* flip for next time */ - } - /* Preset error values: no error propagated to first pixel from left */ - cur0 = cur1 = cur2 = 0; - /* and no error propagated to row below yet */ - belowerr0 = belowerr1 = belowerr2 = 0; - bpreverr0 = bpreverr1 = bpreverr2 = 0; - - for (col = width; col > 0; col--) { - /* curN holds the error propagated from the previous pixel on the - * current line. Add the error propagated from the previous line - * to form the complete error correction term for this pixel, and - * round the error term (which is expressed * 16) to an integer. - * RIGHT_SHIFT rounds towards minus infinity, so adding 8 is correct - * for either sign of the error value. - * Note: errorptr points to *previous* column's array entry. - */ - cur0 = RIGHT_SHIFT(cur0 + errorptr[dir3+0] + 8, 4); - cur1 = RIGHT_SHIFT(cur1 + errorptr[dir3+1] + 8, 4); - cur2 = RIGHT_SHIFT(cur2 + errorptr[dir3+2] + 8, 4); - /* Limit the error using transfer function set by init_error_limit. - * See comments with init_error_limit for rationale. - */ - cur0 = error_limit[cur0]; - cur1 = error_limit[cur1]; - cur2 = error_limit[cur2]; - /* Form pixel value + error, and range-limit to 0..MAXJSAMPLE. - * The maximum error is +- MAXJSAMPLE (or less with error limiting); - * this sets the required size of the range_limit array. - */ - cur0 += GETJSAMPLE(inptr[0]); - cur1 += GETJSAMPLE(inptr[1]); - cur2 += GETJSAMPLE(inptr[2]); - cur0 = GETJSAMPLE(range_limit[cur0]); - cur1 = GETJSAMPLE(range_limit[cur1]); - cur2 = GETJSAMPLE(range_limit[cur2]); - /* Index into the cache with adjusted pixel value */ - cachep = & histogram[cur0>>C0_SHIFT][cur1>>C1_SHIFT][cur2>>C2_SHIFT]; - /* If we have not seen this color before, find nearest colormap */ - /* entry and update the cache */ - if (*cachep == 0) - fill_inverse_cmap(cinfo, cur0>>C0_SHIFT,cur1>>C1_SHIFT,cur2>>C2_SHIFT); - /* Now emit the colormap index for this cell */ - { register int pixcode = *cachep - 1; - *outptr = (JSAMPLE) pixcode; - /* Compute representation error for this pixel */ - cur0 -= GETJSAMPLE(colormap0[pixcode]); - cur1 -= GETJSAMPLE(colormap1[pixcode]); - cur2 -= GETJSAMPLE(colormap2[pixcode]); - } - /* Compute error fractions to be propagated to adjacent pixels. - * Add these into the running sums, and simultaneously shift the - * next-line error sums left by 1 column. - */ - { register LOCFSERROR bnexterr, delta; - - bnexterr = cur0; /* Process component 0 */ - delta = cur0 * 2; - cur0 += delta; /* form error * 3 */ - errorptr[0] = (FSERROR) (bpreverr0 + cur0); - cur0 += delta; /* form error * 5 */ - bpreverr0 = belowerr0 + cur0; - belowerr0 = bnexterr; - cur0 += delta; /* form error * 7 */ - bnexterr = cur1; /* Process component 1 */ - delta = cur1 * 2; - cur1 += delta; /* form error * 3 */ - errorptr[1] = (FSERROR) (bpreverr1 + cur1); - cur1 += delta; /* form error * 5 */ - bpreverr1 = belowerr1 + cur1; - belowerr1 = bnexterr; - cur1 += delta; /* form error * 7 */ - bnexterr = cur2; /* Process component 2 */ - delta = cur2 * 2; - cur2 += delta; /* form error * 3 */ - errorptr[2] = (FSERROR) (bpreverr2 + cur2); - cur2 += delta; /* form error * 5 */ - bpreverr2 = belowerr2 + cur2; - belowerr2 = bnexterr; - cur2 += delta; /* form error * 7 */ - } - /* At this point curN contains the 7/16 error value to be propagated - * to the next pixel on the current line, and all the errors for the - * next line have been shifted over. We are therefore ready to move on. - */ - inptr += dir3; /* Advance pixel pointers to next column */ - outptr += dir; - errorptr += dir3; /* advance errorptr to current column */ - } - /* Post-loop cleanup: we must unload the final error values into the - * final fserrors[] entry. Note we need not unload belowerrN because - * it is for the dummy column before or after the actual array. - */ - errorptr[0] = (FSERROR) bpreverr0; /* unload prev errs into array */ - errorptr[1] = (FSERROR) bpreverr1; - errorptr[2] = (FSERROR) bpreverr2; - } -} - - -/* - * Initialize the error-limiting transfer function (lookup table). - * The raw F-S error computation can potentially compute error values of up to - * +- MAXJSAMPLE. But we want the maximum correction applied to a pixel to be - * much less, otherwise obviously wrong pixels will be created. (Typical - * effects include weird fringes at color-area boundaries, isolated bright - * pixels in a dark area, etc.) The standard advice for avoiding this problem - * is to ensure that the "corners" of the color cube are allocated as output - * colors; then repeated errors in the same direction cannot cause cascading - * error buildup. However, that only prevents the error from getting - * completely out of hand; Aaron Giles reports that error limiting improves - * the results even with corner colors allocated. - * A simple clamping of the error values to about +- MAXJSAMPLE/8 works pretty - * well, but the smoother transfer function used below is even better. Thanks - * to Aaron Giles for this idea. - */ - -LOCAL(void) -init_error_limit (j_decompress_ptr cinfo) -/* Allocate and fill in the error_limiter table */ -{ - my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; - int * table; - int in, out; - - table = (int *) (*cinfo->mem->alloc_small) - ((j_common_ptr) cinfo, JPOOL_IMAGE, (MAXJSAMPLE*2+1) * SIZEOF(int)); - table += MAXJSAMPLE; /* so can index -MAXJSAMPLE .. +MAXJSAMPLE */ - cquantize->error_limiter = table; - -#define STEPSIZE ((MAXJSAMPLE+1)/16) - /* Map errors 1:1 up to +- MAXJSAMPLE/16 */ - out = 0; - for (in = 0; in < STEPSIZE; in++, out++) { - table[in] = out; table[-in] = -out; - } - /* Map errors 1:2 up to +- 3*MAXJSAMPLE/16 */ - for (; in < STEPSIZE*3; in++, out += (in&1) ? 0 : 1) { - table[in] = out; table[-in] = -out; - } - /* Clamp the rest to final out value (which is (MAXJSAMPLE+1)/8) */ - for (; in <= MAXJSAMPLE; in++) { - table[in] = out; table[-in] = -out; - } -#undef STEPSIZE -} - - -/* - * Finish up at the end of each pass. - */ - -METHODDEF(void) -finish_pass1 (j_decompress_ptr cinfo) -{ - my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; - - /* Select the representative colors and fill in cinfo->colormap */ - cinfo->colormap = cquantize->sv_colormap; - select_colors(cinfo, cquantize->desired); - /* Force next pass to zero the color index table */ - cquantize->needs_zeroed = TRUE; -} - - -METHODDEF(void) -finish_pass2 (j_decompress_ptr cinfo) -{ - /* no work */ -} - - -/* - * Initialize for each processing pass. - */ - -METHODDEF(void) -start_pass_2_quant (j_decompress_ptr cinfo, boolean is_pre_scan) -{ - my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; - hist3d histogram = cquantize->histogram; - int i; - - /* Only F-S dithering or no dithering is supported. */ - /* If user asks for ordered dither, give him F-S. */ - if (cinfo->dither_mode != JDITHER_NONE) - cinfo->dither_mode = JDITHER_FS; - - if (is_pre_scan) { - /* Set up method pointers */ - cquantize->pub.color_quantize = prescan_quantize; - cquantize->pub.finish_pass = finish_pass1; - cquantize->needs_zeroed = TRUE; /* Always zero histogram */ - } else { - /* Set up method pointers */ - if (cinfo->dither_mode == JDITHER_FS) - cquantize->pub.color_quantize = pass2_fs_dither; - else - cquantize->pub.color_quantize = pass2_no_dither; - cquantize->pub.finish_pass = finish_pass2; - - /* Make sure color count is acceptable */ - i = cinfo->actual_number_of_colors; - if (i < 1) - ERREXIT1(cinfo, JERR_QUANT_FEW_COLORS, 1); - if (i > MAXNUMCOLORS) - ERREXIT1(cinfo, JERR_QUANT_MANY_COLORS, MAXNUMCOLORS); - - if (cinfo->dither_mode == JDITHER_FS) { - size_t arraysize = (size_t) ((cinfo->output_width + 2) * - (3 * SIZEOF(FSERROR))); - /* Allocate Floyd-Steinberg workspace if we didn't already. */ - if (cquantize->fserrors == NULL) - cquantize->fserrors = (FSERRPTR) (*cinfo->mem->alloc_large) - ((j_common_ptr) cinfo, JPOOL_IMAGE, arraysize); - /* Initialize the propagated errors to zero. */ - FMEMZERO((void FAR *) cquantize->fserrors, arraysize); - /* Make the error-limit table if we didn't already. */ - if (cquantize->error_limiter == NULL) - init_error_limit(cinfo); - cquantize->on_odd_row = FALSE; - } - - } - /* Zero the histogram or inverse color map, if necessary */ - if (cquantize->needs_zeroed) { - for (i = 0; i < HIST_C0_ELEMS; i++) { - FMEMZERO((void FAR *) histogram[i], - HIST_C1_ELEMS*HIST_C2_ELEMS * SIZEOF(histcell)); - } - cquantize->needs_zeroed = FALSE; - } -} - - -/* - * Switch to a new external colormap between output passes. - */ - -METHODDEF(void) -new_color_map_2_quant (j_decompress_ptr cinfo) -{ - my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; - - /* Reset the inverse color map */ - cquantize->needs_zeroed = TRUE; -} - - -/* - * Module initialization routine for 2-pass color quantization. - */ - -GLOBAL(void) -jinit_2pass_quantizer (j_decompress_ptr cinfo) -{ - my_cquantize_ptr cquantize; - int i; - - cquantize = (my_cquantize_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(my_cquantizer)); - cinfo->cquantize = (struct jpeg_color_quantizer *) cquantize; - cquantize->pub.start_pass = start_pass_2_quant; - cquantize->pub.new_color_map = new_color_map_2_quant; - cquantize->fserrors = NULL; /* flag optional arrays not allocated */ - cquantize->error_limiter = NULL; - - /* Make sure jdmaster didn't give me a case I can't handle */ - if (cinfo->out_color_components != 3) - ERREXIT(cinfo, JERR_NOTIMPL); - - /* Allocate the histogram/inverse colormap storage */ - cquantize->histogram = (hist3d) (*cinfo->mem->alloc_small) - ((j_common_ptr) cinfo, JPOOL_IMAGE, HIST_C0_ELEMS * SIZEOF(hist2d)); - for (i = 0; i < HIST_C0_ELEMS; i++) { - cquantize->histogram[i] = (hist2d) (*cinfo->mem->alloc_large) - ((j_common_ptr) cinfo, JPOOL_IMAGE, - HIST_C1_ELEMS*HIST_C2_ELEMS * SIZEOF(histcell)); - } - cquantize->needs_zeroed = TRUE; /* histogram is garbage now */ - - /* Allocate storage for the completed colormap, if required. - * We do this now since it is FAR storage and may affect - * the memory manager's space calculations. - */ - if (cinfo->enable_2pass_quant) { - /* Make sure color count is acceptable */ - int desired = cinfo->desired_number_of_colors; - /* Lower bound on # of colors ... somewhat arbitrary as long as > 0 */ - if (desired < 8) - ERREXIT1(cinfo, JERR_QUANT_FEW_COLORS, 8); - /* Make sure colormap indexes can be represented by JSAMPLEs */ - if (desired > MAXNUMCOLORS) - ERREXIT1(cinfo, JERR_QUANT_MANY_COLORS, MAXNUMCOLORS); - cquantize->sv_colormap = (*cinfo->mem->alloc_sarray) - ((j_common_ptr) cinfo,JPOOL_IMAGE, (JDIMENSION) desired, (JDIMENSION) 3); - cquantize->desired = desired; - } else - cquantize->sv_colormap = NULL; - - /* Only F-S dithering or no dithering is supported. */ - /* If user asks for ordered dither, give him F-S. */ - if (cinfo->dither_mode != JDITHER_NONE) - cinfo->dither_mode = JDITHER_FS; - - /* Allocate Floyd-Steinberg workspace if necessary. - * This isn't really needed until pass 2, but again it is FAR storage. - * Although we will cope with a later change in dither_mode, - * we do not promise to honor max_memory_to_use if dither_mode changes. - */ - if (cinfo->dither_mode == JDITHER_FS) { - cquantize->fserrors = (FSERRPTR) (*cinfo->mem->alloc_large) - ((j_common_ptr) cinfo, JPOOL_IMAGE, - (size_t) ((cinfo->output_width + 2) * (3 * SIZEOF(FSERROR)))); - /* Might as well create the error-limiting table too. */ - init_error_limit(cinfo); - } -} - -#endif /* QUANT_2PASS_SUPPORTED */ diff --git a/jpeg/jutils.c b/jpeg/jutils.c deleted file mode 100755 index 5b16b6d..0000000 --- a/jpeg/jutils.c +++ /dev/null @@ -1,227 +0,0 @@ -/* - * jutils.c - * - * Copyright (C) 1991-1996, Thomas G. Lane. - * Modified 2009-2011 by Guido Vollbeding. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains tables and miscellaneous utility routines needed - * for both compression and decompression. - * Note we prefix all global names with "j" to minimize conflicts with - * a surrounding application. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* - * jpeg_zigzag_order[i] is the zigzag-order position of the i'th element - * of a DCT block read in natural order (left to right, top to bottom). - */ - -#if 0 /* This table is not actually needed in v6a */ - -const int jpeg_zigzag_order[DCTSIZE2] = { - 0, 1, 5, 6, 14, 15, 27, 28, - 2, 4, 7, 13, 16, 26, 29, 42, - 3, 8, 12, 17, 25, 30, 41, 43, - 9, 11, 18, 24, 31, 40, 44, 53, - 10, 19, 23, 32, 39, 45, 52, 54, - 20, 22, 33, 38, 46, 51, 55, 60, - 21, 34, 37, 47, 50, 56, 59, 61, - 35, 36, 48, 49, 57, 58, 62, 63 -}; - -#endif - -/* - * jpeg_natural_order[i] is the natural-order position of the i'th element - * of zigzag order. - * - * When reading corrupted data, the Huffman decoders could attempt - * to reference an entry beyond the end of this array (if the decoded - * zero run length reaches past the end of the block). To prevent - * wild stores without adding an inner-loop test, we put some extra - * "63"s after the real entries. This will cause the extra coefficient - * to be stored in location 63 of the block, not somewhere random. - * The worst case would be a run-length of 15, which means we need 16 - * fake entries. - */ - -const int jpeg_natural_order[DCTSIZE2+16] = { - 0, 1, 8, 16, 9, 2, 3, 10, - 17, 24, 32, 25, 18, 11, 4, 5, - 12, 19, 26, 33, 40, 48, 41, 34, - 27, 20, 13, 6, 7, 14, 21, 28, - 35, 42, 49, 56, 57, 50, 43, 36, - 29, 22, 15, 23, 30, 37, 44, 51, - 58, 59, 52, 45, 38, 31, 39, 46, - 53, 60, 61, 54, 47, 55, 62, 63, - 63, 63, 63, 63, 63, 63, 63, 63, /* extra entries for safety in decoder */ - 63, 63, 63, 63, 63, 63, 63, 63 -}; - -const int jpeg_natural_order7[7*7+16] = { - 0, 1, 8, 16, 9, 2, 3, 10, - 17, 24, 32, 25, 18, 11, 4, 5, - 12, 19, 26, 33, 40, 48, 41, 34, - 27, 20, 13, 6, 14, 21, 28, 35, - 42, 49, 50, 43, 36, 29, 22, 30, - 37, 44, 51, 52, 45, 38, 46, 53, - 54, - 63, 63, 63, 63, 63, 63, 63, 63, /* extra entries for safety in decoder */ - 63, 63, 63, 63, 63, 63, 63, 63 -}; - -const int jpeg_natural_order6[6*6+16] = { - 0, 1, 8, 16, 9, 2, 3, 10, - 17, 24, 32, 25, 18, 11, 4, 5, - 12, 19, 26, 33, 40, 41, 34, 27, - 20, 13, 21, 28, 35, 42, 43, 36, - 29, 37, 44, 45, - 63, 63, 63, 63, 63, 63, 63, 63, /* extra entries for safety in decoder */ - 63, 63, 63, 63, 63, 63, 63, 63 -}; - -const int jpeg_natural_order5[5*5+16] = { - 0, 1, 8, 16, 9, 2, 3, 10, - 17, 24, 32, 25, 18, 11, 4, 12, - 19, 26, 33, 34, 27, 20, 28, 35, - 36, - 63, 63, 63, 63, 63, 63, 63, 63, /* extra entries for safety in decoder */ - 63, 63, 63, 63, 63, 63, 63, 63 -}; - -const int jpeg_natural_order4[4*4+16] = { - 0, 1, 8, 16, 9, 2, 3, 10, - 17, 24, 25, 18, 11, 19, 26, 27, - 63, 63, 63, 63, 63, 63, 63, 63, /* extra entries for safety in decoder */ - 63, 63, 63, 63, 63, 63, 63, 63 -}; - -const int jpeg_natural_order3[3*3+16] = { - 0, 1, 8, 16, 9, 2, 10, 17, - 18, - 63, 63, 63, 63, 63, 63, 63, 63, /* extra entries for safety in decoder */ - 63, 63, 63, 63, 63, 63, 63, 63 -}; - -const int jpeg_natural_order2[2*2+16] = { - 0, 1, 8, 9, - 63, 63, 63, 63, 63, 63, 63, 63, /* extra entries for safety in decoder */ - 63, 63, 63, 63, 63, 63, 63, 63 -}; - - -/* - * Arithmetic utilities - */ - -GLOBAL(long) -jdiv_round_up (long a, long b) -/* Compute a/b rounded up to next integer, ie, ceil(a/b) */ -/* Assumes a >= 0, b > 0 */ -{ - return (a + b - 1L) / b; -} - - -GLOBAL(long) -jround_up (long a, long b) -/* Compute a rounded up to next multiple of b, ie, ceil(a/b)*b */ -/* Assumes a >= 0, b > 0 */ -{ - a += b - 1L; - return a - (a % b); -} - - -/* On normal machines we can apply MEMCOPY() and MEMZERO() to sample arrays - * and coefficient-block arrays. This won't work on 80x86 because the arrays - * are FAR and we're assuming a small-pointer memory model. However, some - * DOS compilers provide far-pointer versions of memcpy() and memset() even - * in the small-model libraries. These will be used if USE_FMEM is defined. - * Otherwise, the routines below do it the hard way. (The performance cost - * is not all that great, because these routines aren't very heavily used.) - */ - -#ifndef NEED_FAR_POINTERS /* normal case, same as regular macro */ -#define FMEMCOPY(dest,src,size) MEMCOPY(dest,src,size) -#else /* 80x86 case, define if we can */ -#ifdef USE_FMEM -#define FMEMCOPY(dest,src,size) _fmemcpy((void FAR *)(dest), (const void FAR *)(src), (size_t)(size)) -#else -/* This function is for use by the FMEMZERO macro defined in jpegint.h. - * Do not call this function directly, use the FMEMZERO macro instead. - */ -GLOBAL(void) -jzero_far (void FAR * target, size_t bytestozero) -/* Zero out a chunk of FAR memory. */ -/* This might be sample-array data, block-array data, or alloc_large data. */ -{ - register char FAR * ptr = (char FAR *) target; - register size_t count; - - for (count = bytestozero; count > 0; count--) { - *ptr++ = 0; - } -} -#endif -#endif - - -GLOBAL(void) -jcopy_sample_rows (JSAMPARRAY input_array, int source_row, - JSAMPARRAY output_array, int dest_row, - int num_rows, JDIMENSION num_cols) -/* Copy some rows of samples from one place to another. - * num_rows rows are copied from input_array[source_row++] - * to output_array[dest_row++]; these areas may overlap for duplication. - * The source and destination arrays must be at least as wide as num_cols. - */ -{ - register JSAMPROW inptr, outptr; -#ifdef FMEMCOPY - register size_t count = (size_t) (num_cols * SIZEOF(JSAMPLE)); -#else - register JDIMENSION count; -#endif - register int row; - - input_array += source_row; - output_array += dest_row; - - for (row = num_rows; row > 0; row--) { - inptr = *input_array++; - outptr = *output_array++; -#ifdef FMEMCOPY - FMEMCOPY(outptr, inptr, count); -#else - for (count = num_cols; count > 0; count--) - *outptr++ = *inptr++; /* needn't bother with GETJSAMPLE() here */ -#endif - } -} - - -GLOBAL(void) -jcopy_block_row (JBLOCKROW input_row, JBLOCKROW output_row, - JDIMENSION num_blocks) -/* Copy a row of coefficient blocks from one place to another. */ -{ -#ifdef FMEMCOPY - FMEMCOPY(output_row, input_row, num_blocks * (DCTSIZE2 * SIZEOF(JCOEF))); -#else - register JCOEFPTR inptr, outptr; - register long count; - - inptr = (JCOEFPTR) input_row; - outptr = (JCOEFPTR) output_row; - for (count = (long) num_blocks * DCTSIZE2; count > 0; count--) { - *outptr++ = *inptr++; - } -#endif -} diff --git a/jpeg/jversion.h b/jpeg/jversion.h deleted file mode 100755 index 5d49151..0000000 --- a/jpeg/jversion.h +++ /dev/null @@ -1,14 +0,0 @@ -/* - * jversion.h - * - * Copyright (C) 1991-2012, Thomas G. Lane, Guido Vollbeding. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains software version identification. - */ - - -#define JVERSION "8d 15-Jan-2012" - -#define JCOPYRIGHT "Copyright (C) 2012, Thomas G. Lane, Guido Vollbeding" diff --git a/jpeg/libjpeg.map b/jpeg/libjpeg.map deleted file mode 100755 index ac77dca..0000000 --- a/jpeg/libjpeg.map +++ /dev/null @@ -1,4 +0,0 @@ -LIBJPEG_8.0 { - global: - *; -}; diff --git a/jpeg/libjpeg.txt b/jpeg/libjpeg.txt deleted file mode 100755 index 9702669..0000000 --- a/jpeg/libjpeg.txt +++ /dev/null @@ -1,3085 +0,0 @@ -USING THE IJG JPEG LIBRARY - -Copyright (C) 1994-2011, Thomas G. Lane, Guido Vollbeding. -This file is part of the Independent JPEG Group's software. -For conditions of distribution and use, see the accompanying README file. - - -This file describes how to use the IJG JPEG library within an application -program. Read it if you want to write a program that uses the library. - -The file example.c provides heavily commented skeleton code for calling the -JPEG library. Also see jpeglib.h (the include file to be used by application -programs) for full details about data structures and function parameter lists. -The library source code, of course, is the ultimate reference. - -Note that there have been *major* changes from the application interface -presented by IJG version 4 and earlier versions. The old design had several -inherent limitations, and it had accumulated a lot of cruft as we added -features while trying to minimize application-interface changes. We have -sacrificed backward compatibility in the version 5 rewrite, but we think the -improvements justify this. - - -TABLE OF CONTENTS ------------------ - -Overview: - Functions provided by the library - Outline of typical usage -Basic library usage: - Data formats - Compression details - Decompression details - Mechanics of usage: include files, linking, etc -Advanced features: - Compression parameter selection - Decompression parameter selection - Special color spaces - Error handling - Compressed data handling (source and destination managers) - I/O suspension - Progressive JPEG support - Buffered-image mode - Abbreviated datastreams and multiple images - Special markers - Raw (downsampled) image data - Really raw data: DCT coefficients - Progress monitoring - Memory management - Memory usage - Library compile-time options - Portability considerations - Notes for MS-DOS implementors - -You should read at least the overview and basic usage sections before trying -to program with the library. The sections on advanced features can be read -if and when you need them. - - -OVERVIEW -======== - -Functions provided by the library ---------------------------------- - -The IJG JPEG library provides C code to read and write JPEG-compressed image -files. The surrounding application program receives or supplies image data a -scanline at a time, using a straightforward uncompressed image format. All -details of color conversion and other preprocessing/postprocessing can be -handled by the library. - -The library includes a substantial amount of code that is not covered by the -JPEG standard but is necessary for typical applications of JPEG. These -functions preprocess the image before JPEG compression or postprocess it after -decompression. They include colorspace conversion, downsampling/upsampling, -and color quantization. The application indirectly selects use of this code -by specifying the format in which it wishes to supply or receive image data. -For example, if colormapped output is requested, then the decompression -library automatically invokes color quantization. - -A wide range of quality vs. speed tradeoffs are possible in JPEG processing, -and even more so in decompression postprocessing. The decompression library -provides multiple implementations that cover most of the useful tradeoffs, -ranging from very-high-quality down to fast-preview operation. On the -compression side we have generally not provided low-quality choices, since -compression is normally less time-critical. It should be understood that the -low-quality modes may not meet the JPEG standard's accuracy requirements; -nonetheless, they are useful for viewers. - -A word about functions *not* provided by the library. We handle a subset of -the ISO JPEG standard; most baseline, extended-sequential, and progressive -JPEG processes are supported. (Our subset includes all features now in common -use.) Unsupported ISO options include: - * Hierarchical storage - * Lossless JPEG - * DNL marker - * Nonintegral subsampling ratios -We support both 8- and 12-bit data precision, but this is a compile-time -choice rather than a run-time choice; hence it is difficult to use both -precisions in a single application. - -By itself, the library handles only interchange JPEG datastreams --- in -particular the widely used JFIF file format. The library can be used by -surrounding code to process interchange or abbreviated JPEG datastreams that -are embedded in more complex file formats. (For example, this library is -used by the free LIBTIFF library to support JPEG compression in TIFF.) - - -Outline of typical usage ------------------------- - -The rough outline of a JPEG compression operation is: - - Allocate and initialize a JPEG compression object - Specify the destination for the compressed data (eg, a file) - Set parameters for compression, including image size & colorspace - jpeg_start_compress(...); - while (scan lines remain to be written) - jpeg_write_scanlines(...); - jpeg_finish_compress(...); - Release the JPEG compression object - -A JPEG compression object holds parameters and working state for the JPEG -library. We make creation/destruction of the object separate from starting -or finishing compression of an image; the same object can be re-used for a -series of image compression operations. This makes it easy to re-use the -same parameter settings for a sequence of images. Re-use of a JPEG object -also has important implications for processing abbreviated JPEG datastreams, -as discussed later. - -The image data to be compressed is supplied to jpeg_write_scanlines() from -in-memory buffers. If the application is doing file-to-file compression, -reading image data from the source file is the application's responsibility. -The library emits compressed data by calling a "data destination manager", -which typically will write the data into a file; but the application can -provide its own destination manager to do something else. - -Similarly, the rough outline of a JPEG decompression operation is: - - Allocate and initialize a JPEG decompression object - Specify the source of the compressed data (eg, a file) - Call jpeg_read_header() to obtain image info - Set parameters for decompression - jpeg_start_decompress(...); - while (scan lines remain to be read) - jpeg_read_scanlines(...); - jpeg_finish_decompress(...); - Release the JPEG decompression object - -This is comparable to the compression outline except that reading the -datastream header is a separate step. This is helpful because information -about the image's size, colorspace, etc is available when the application -selects decompression parameters. For example, the application can choose an -output scaling ratio that will fit the image into the available screen size. - -The decompression library obtains compressed data by calling a data source -manager, which typically will read the data from a file; but other behaviors -can be obtained with a custom source manager. Decompressed data is delivered -into in-memory buffers passed to jpeg_read_scanlines(). - -It is possible to abort an incomplete compression or decompression operation -by calling jpeg_abort(); or, if you do not need to retain the JPEG object, -simply release it by calling jpeg_destroy(). - -JPEG compression and decompression objects are two separate struct types. -However, they share some common fields, and certain routines such as -jpeg_destroy() can work on either type of object. - -The JPEG library has no static variables: all state is in the compression -or decompression object. Therefore it is possible to process multiple -compression and decompression operations concurrently, using multiple JPEG -objects. - -Both compression and decompression can be done in an incremental memory-to- -memory fashion, if suitable source/destination managers are used. See the -section on "I/O suspension" for more details. - - -BASIC LIBRARY USAGE -=================== - -Data formats ------------- - -Before diving into procedural details, it is helpful to understand the -image data format that the JPEG library expects or returns. - -The standard input image format is a rectangular array of pixels, with each -pixel having the same number of "component" or "sample" values (color -channels). You must specify how many components there are and the colorspace -interpretation of the components. Most applications will use RGB data -(three components per pixel) or grayscale data (one component per pixel). -PLEASE NOTE THAT RGB DATA IS THREE SAMPLES PER PIXEL, GRAYSCALE ONLY ONE. -A remarkable number of people manage to miss this, only to find that their -programs don't work with grayscale JPEG files. - -There is no provision for colormapped input. JPEG files are always full-color -or full grayscale (or sometimes another colorspace such as CMYK). You can -feed in a colormapped image by expanding it to full-color format. However -JPEG often doesn't work very well with source data that has been colormapped, -because of dithering noise. This is discussed in more detail in the JPEG FAQ -and the other references mentioned in the README file. - -Pixels are stored by scanlines, with each scanline running from left to -right. The component values for each pixel are adjacent in the row; for -example, R,G,B,R,G,B,R,G,B,... for 24-bit RGB color. Each scanline is an -array of data type JSAMPLE --- which is typically "unsigned char", unless -you've changed jmorecfg.h. (You can also change the RGB pixel layout, say -to B,G,R order, by modifying jmorecfg.h. But see the restrictions listed in -that file before doing so.) - -A 2-D array of pixels is formed by making a list of pointers to the starts of -scanlines; so the scanlines need not be physically adjacent in memory. Even -if you process just one scanline at a time, you must make a one-element -pointer array to conform to this structure. Pointers to JSAMPLE rows are of -type JSAMPROW, and the pointer to the pointer array is of type JSAMPARRAY. - -The library accepts or supplies one or more complete scanlines per call. -It is not possible to process part of a row at a time. Scanlines are always -processed top-to-bottom. You can process an entire image in one call if you -have it all in memory, but usually it's simplest to process one scanline at -a time. - -For best results, source data values should have the precision specified by -BITS_IN_JSAMPLE (normally 8 bits). For instance, if you choose to compress -data that's only 6 bits/channel, you should left-justify each value in a -byte before passing it to the compressor. If you need to compress data -that has more than 8 bits/channel, compile with BITS_IN_JSAMPLE = 12. -(See "Library compile-time options", later.) - - -The data format returned by the decompressor is the same in all details, -except that colormapped output is supported. (Again, a JPEG file is never -colormapped. But you can ask the decompressor to perform on-the-fly color -quantization to deliver colormapped output.) If you request colormapped -output then the returned data array contains a single JSAMPLE per pixel; -its value is an index into a color map. The color map is represented as -a 2-D JSAMPARRAY in which each row holds the values of one color component, -that is, colormap[i][j] is the value of the i'th color component for pixel -value (map index) j. Note that since the colormap indexes are stored in -JSAMPLEs, the maximum number of colors is limited by the size of JSAMPLE -(ie, at most 256 colors for an 8-bit JPEG library). - - -Compression details -------------------- - -Here we revisit the JPEG compression outline given in the overview. - -1. Allocate and initialize a JPEG compression object. - -A JPEG compression object is a "struct jpeg_compress_struct". (It also has -a bunch of subsidiary structures which are allocated via malloc(), but the -application doesn't control those directly.) This struct can be just a local -variable in the calling routine, if a single routine is going to execute the -whole JPEG compression sequence. Otherwise it can be static or allocated -from malloc(). - -You will also need a structure representing a JPEG error handler. The part -of this that the library cares about is a "struct jpeg_error_mgr". If you -are providing your own error handler, you'll typically want to embed the -jpeg_error_mgr struct in a larger structure; this is discussed later under -"Error handling". For now we'll assume you are just using the default error -handler. The default error handler will print JPEG error/warning messages -on stderr, and it will call exit() if a fatal error occurs. - -You must initialize the error handler structure, store a pointer to it into -the JPEG object's "err" field, and then call jpeg_create_compress() to -initialize the rest of the JPEG object. - -Typical code for this step, if you are using the default error handler, is - - struct jpeg_compress_struct cinfo; - struct jpeg_error_mgr jerr; - ... - cinfo.err = jpeg_std_error(&jerr); - jpeg_create_compress(&cinfo); - -jpeg_create_compress allocates a small amount of memory, so it could fail -if you are out of memory. In that case it will exit via the error handler; -that's why the error handler must be initialized first. - - -2. Specify the destination for the compressed data (eg, a file). - -As previously mentioned, the JPEG library delivers compressed data to a -"data destination" module. The library includes one data destination -module which knows how to write to a stdio stream. You can use your own -destination module if you want to do something else, as discussed later. - -If you use the standard destination module, you must open the target stdio -stream beforehand. Typical code for this step looks like: - - FILE * outfile; - ... - if ((outfile = fopen(filename, "wb")) == NULL) { - fprintf(stderr, "can't open %s\n", filename); - exit(1); - } - jpeg_stdio_dest(&cinfo, outfile); - -where the last line invokes the standard destination module. - -WARNING: it is critical that the binary compressed data be delivered to the -output file unchanged. On non-Unix systems the stdio library may perform -newline translation or otherwise corrupt binary data. To suppress this -behavior, you may need to use a "b" option to fopen (as shown above), or use -setmode() or another routine to put the stdio stream in binary mode. See -cjpeg.c and djpeg.c for code that has been found to work on many systems. - -You can select the data destination after setting other parameters (step 3), -if that's more convenient. You may not change the destination between -calling jpeg_start_compress() and jpeg_finish_compress(). - - -3. Set parameters for compression, including image size & colorspace. - -You must supply information about the source image by setting the following -fields in the JPEG object (cinfo structure): - - image_width Width of image, in pixels - image_height Height of image, in pixels - input_components Number of color channels (samples per pixel) - in_color_space Color space of source image - -The image dimensions are, hopefully, obvious. JPEG supports image dimensions -of 1 to 64K pixels in either direction. The input color space is typically -RGB or grayscale, and input_components is 3 or 1 accordingly. (See "Special -color spaces", later, for more info.) The in_color_space field must be -assigned one of the J_COLOR_SPACE enum constants, typically JCS_RGB or -JCS_GRAYSCALE. - -JPEG has a large number of compression parameters that determine how the -image is encoded. Most applications don't need or want to know about all -these parameters. You can set all the parameters to reasonable defaults by -calling jpeg_set_defaults(); then, if there are particular values you want -to change, you can do so after that. The "Compression parameter selection" -section tells about all the parameters. - -You must set in_color_space correctly before calling jpeg_set_defaults(), -because the defaults depend on the source image colorspace. However the -other three source image parameters need not be valid until you call -jpeg_start_compress(). There's no harm in calling jpeg_set_defaults() more -than once, if that happens to be convenient. - -Typical code for a 24-bit RGB source image is - - cinfo.image_width = Width; /* image width and height, in pixels */ - cinfo.image_height = Height; - cinfo.input_components = 3; /* # of color components per pixel */ - cinfo.in_color_space = JCS_RGB; /* colorspace of input image */ - - jpeg_set_defaults(&cinfo); - /* Make optional parameter settings here */ - - -4. jpeg_start_compress(...); - -After you have established the data destination and set all the necessary -source image info and other parameters, call jpeg_start_compress() to begin -a compression cycle. This will initialize internal state, allocate working -storage, and emit the first few bytes of the JPEG datastream header. - -Typical code: - - jpeg_start_compress(&cinfo, TRUE); - -The "TRUE" parameter ensures that a complete JPEG interchange datastream -will be written. This is appropriate in most cases. If you think you might -want to use an abbreviated datastream, read the section on abbreviated -datastreams, below. - -Once you have called jpeg_start_compress(), you may not alter any JPEG -parameters or other fields of the JPEG object until you have completed -the compression cycle. - - -5. while (scan lines remain to be written) - jpeg_write_scanlines(...); - -Now write all the required image data by calling jpeg_write_scanlines() -one or more times. You can pass one or more scanlines in each call, up -to the total image height. In most applications it is convenient to pass -just one or a few scanlines at a time. The expected format for the passed -data is discussed under "Data formats", above. - -Image data should be written in top-to-bottom scanline order. The JPEG spec -contains some weasel wording about how top and bottom are application-defined -terms (a curious interpretation of the English language...) but if you want -your files to be compatible with everyone else's, you WILL use top-to-bottom -order. If the source data must be read in bottom-to-top order, you can use -the JPEG library's virtual array mechanism to invert the data efficiently. -Examples of this can be found in the sample application cjpeg. - -The library maintains a count of the number of scanlines written so far -in the next_scanline field of the JPEG object. Usually you can just use -this variable as the loop counter, so that the loop test looks like -"while (cinfo.next_scanline < cinfo.image_height)". - -Code for this step depends heavily on the way that you store the source data. -example.c shows the following code for the case of a full-size 2-D source -array containing 3-byte RGB pixels: - - JSAMPROW row_pointer[1]; /* pointer to a single row */ - int row_stride; /* physical row width in buffer */ - - row_stride = image_width * 3; /* JSAMPLEs per row in image_buffer */ - - while (cinfo.next_scanline < cinfo.image_height) { - row_pointer[0] = & image_buffer[cinfo.next_scanline * row_stride]; - jpeg_write_scanlines(&cinfo, row_pointer, 1); - } - -jpeg_write_scanlines() returns the number of scanlines actually written. -This will normally be equal to the number passed in, so you can usually -ignore the return value. It is different in just two cases: - * If you try to write more scanlines than the declared image height, - the additional scanlines are ignored. - * If you use a suspending data destination manager, output buffer overrun - will cause the compressor to return before accepting all the passed lines. - This feature is discussed under "I/O suspension", below. The normal - stdio destination manager will NOT cause this to happen. -In any case, the return value is the same as the change in the value of -next_scanline. - - -6. jpeg_finish_compress(...); - -After all the image data has been written, call jpeg_finish_compress() to -complete the compression cycle. This step is ESSENTIAL to ensure that the -last bufferload of data is written to the data destination. -jpeg_finish_compress() also releases working memory associated with the JPEG -object. - -Typical code: - - jpeg_finish_compress(&cinfo); - -If using the stdio destination manager, don't forget to close the output -stdio stream (if necessary) afterwards. - -If you have requested a multi-pass operating mode, such as Huffman code -optimization, jpeg_finish_compress() will perform the additional passes using -data buffered by the first pass. In this case jpeg_finish_compress() may take -quite a while to complete. With the default compression parameters, this will -not happen. - -It is an error to call jpeg_finish_compress() before writing the necessary -total number of scanlines. If you wish to abort compression, call -jpeg_abort() as discussed below. - -After completing a compression cycle, you may dispose of the JPEG object -as discussed next, or you may use it to compress another image. In that case -return to step 2, 3, or 4 as appropriate. If you do not change the -destination manager, the new datastream will be written to the same target. -If you do not change any JPEG parameters, the new datastream will be written -with the same parameters as before. Note that you can change the input image -dimensions freely between cycles, but if you change the input colorspace, you -should call jpeg_set_defaults() to adjust for the new colorspace; and then -you'll need to repeat all of step 3. - - -7. Release the JPEG compression object. - -When you are done with a JPEG compression object, destroy it by calling -jpeg_destroy_compress(). This will free all subsidiary memory (regardless of -the previous state of the object). Or you can call jpeg_destroy(), which -works for either compression or decompression objects --- this may be more -convenient if you are sharing code between compression and decompression -cases. (Actually, these routines are equivalent except for the declared type -of the passed pointer. To avoid gripes from ANSI C compilers, jpeg_destroy() -should be passed a j_common_ptr.) - -If you allocated the jpeg_compress_struct structure from malloc(), freeing -it is your responsibility --- jpeg_destroy() won't. Ditto for the error -handler structure. - -Typical code: - - jpeg_destroy_compress(&cinfo); - - -8. Aborting. - -If you decide to abort a compression cycle before finishing, you can clean up -in either of two ways: - -* If you don't need the JPEG object any more, just call - jpeg_destroy_compress() or jpeg_destroy() to release memory. This is - legitimate at any point after calling jpeg_create_compress() --- in fact, - it's safe even if jpeg_create_compress() fails. - -* If you want to re-use the JPEG object, call jpeg_abort_compress(), or call - jpeg_abort() which works on both compression and decompression objects. - This will return the object to an idle state, releasing any working memory. - jpeg_abort() is allowed at any time after successful object creation. - -Note that cleaning up the data destination, if required, is your -responsibility; neither of these routines will call term_destination(). -(See "Compressed data handling", below, for more about that.) - -jpeg_destroy() and jpeg_abort() are the only safe calls to make on a JPEG -object that has reported an error by calling error_exit (see "Error handling" -for more info). The internal state of such an object is likely to be out of -whack. Either of these two routines will return the object to a known state. - - -Decompression details ---------------------- - -Here we revisit the JPEG decompression outline given in the overview. - -1. Allocate and initialize a JPEG decompression object. - -This is just like initialization for compression, as discussed above, -except that the object is a "struct jpeg_decompress_struct" and you -call jpeg_create_decompress(). Error handling is exactly the same. - -Typical code: - - struct jpeg_decompress_struct cinfo; - struct jpeg_error_mgr jerr; - ... - cinfo.err = jpeg_std_error(&jerr); - jpeg_create_decompress(&cinfo); - -(Both here and in the IJG code, we usually use variable name "cinfo" for -both compression and decompression objects.) - - -2. Specify the source of the compressed data (eg, a file). - -As previously mentioned, the JPEG library reads compressed data from a "data -source" module. The library includes one data source module which knows how -to read from a stdio stream. You can use your own source module if you want -to do something else, as discussed later. - -If you use the standard source module, you must open the source stdio stream -beforehand. Typical code for this step looks like: - - FILE * infile; - ... - if ((infile = fopen(filename, "rb")) == NULL) { - fprintf(stderr, "can't open %s\n", filename); - exit(1); - } - jpeg_stdio_src(&cinfo, infile); - -where the last line invokes the standard source module. - -WARNING: it is critical that the binary compressed data be read unchanged. -On non-Unix systems the stdio library may perform newline translation or -otherwise corrupt binary data. To suppress this behavior, you may need to use -a "b" option to fopen (as shown above), or use setmode() or another routine to -put the stdio stream in binary mode. See cjpeg.c and djpeg.c for code that -has been found to work on many systems. - -You may not change the data source between calling jpeg_read_header() and -jpeg_finish_decompress(). If you wish to read a series of JPEG images from -a single source file, you should repeat the jpeg_read_header() to -jpeg_finish_decompress() sequence without reinitializing either the JPEG -object or the data source module; this prevents buffered input data from -being discarded. - - -3. Call jpeg_read_header() to obtain image info. - -Typical code for this step is just - - jpeg_read_header(&cinfo, TRUE); - -This will read the source datastream header markers, up to the beginning -of the compressed data proper. On return, the image dimensions and other -info have been stored in the JPEG object. The application may wish to -consult this information before selecting decompression parameters. - -More complex code is necessary if - * A suspending data source is used --- in that case jpeg_read_header() - may return before it has read all the header data. See "I/O suspension", - below. The normal stdio source manager will NOT cause this to happen. - * Abbreviated JPEG files are to be processed --- see the section on - abbreviated datastreams. Standard applications that deal only in - interchange JPEG files need not be concerned with this case either. - -It is permissible to stop at this point if you just wanted to find out the -image dimensions and other header info for a JPEG file. In that case, -call jpeg_destroy() when you are done with the JPEG object, or call -jpeg_abort() to return it to an idle state before selecting a new data -source and reading another header. - - -4. Set parameters for decompression. - -jpeg_read_header() sets appropriate default decompression parameters based on -the properties of the image (in particular, its colorspace). However, you -may well want to alter these defaults before beginning the decompression. -For example, the default is to produce full color output from a color file. -If you want colormapped output you must ask for it. Other options allow the -returned image to be scaled and allow various speed/quality tradeoffs to be -selected. "Decompression parameter selection", below, gives details. - -If the defaults are appropriate, nothing need be done at this step. - -Note that all default values are set by each call to jpeg_read_header(). -If you reuse a decompression object, you cannot expect your parameter -settings to be preserved across cycles, as you can for compression. -You must set desired parameter values each time. - - -5. jpeg_start_decompress(...); - -Once the parameter values are satisfactory, call jpeg_start_decompress() to -begin decompression. This will initialize internal state, allocate working -memory, and prepare for returning data. - -Typical code is just - - jpeg_start_decompress(&cinfo); - -If you have requested a multi-pass operating mode, such as 2-pass color -quantization, jpeg_start_decompress() will do everything needed before data -output can begin. In this case jpeg_start_decompress() may take quite a while -to complete. With a single-scan (non progressive) JPEG file and default -decompression parameters, this will not happen; jpeg_start_decompress() will -return quickly. - -After this call, the final output image dimensions, including any requested -scaling, are available in the JPEG object; so is the selected colormap, if -colormapped output has been requested. Useful fields include - - output_width image width and height, as scaled - output_height - out_color_components # of color components in out_color_space - output_components # of color components returned per pixel - colormap the selected colormap, if any - actual_number_of_colors number of entries in colormap - -output_components is 1 (a colormap index) when quantizing colors; otherwise it -equals out_color_components. It is the number of JSAMPLE values that will be -emitted per pixel in the output arrays. - -Typically you will need to allocate data buffers to hold the incoming image. -You will need output_width * output_components JSAMPLEs per scanline in your -output buffer, and a total of output_height scanlines will be returned. - -Note: if you are using the JPEG library's internal memory manager to allocate -data buffers (as djpeg does), then the manager's protocol requires that you -request large buffers *before* calling jpeg_start_decompress(). This is a -little tricky since the output_XXX fields are not normally valid then. You -can make them valid by calling jpeg_calc_output_dimensions() after setting the -relevant parameters (scaling, output color space, and quantization flag). - - -6. while (scan lines remain to be read) - jpeg_read_scanlines(...); - -Now you can read the decompressed image data by calling jpeg_read_scanlines() -one or more times. At each call, you pass in the maximum number of scanlines -to be read (ie, the height of your working buffer); jpeg_read_scanlines() -will return up to that many lines. The return value is the number of lines -actually read. The format of the returned data is discussed under "Data -formats", above. Don't forget that grayscale and color JPEGs will return -different data formats! - -Image data is returned in top-to-bottom scanline order. If you must write -out the image in bottom-to-top order, you can use the JPEG library's virtual -array mechanism to invert the data efficiently. Examples of this can be -found in the sample application djpeg. - -The library maintains a count of the number of scanlines returned so far -in the output_scanline field of the JPEG object. Usually you can just use -this variable as the loop counter, so that the loop test looks like -"while (cinfo.output_scanline < cinfo.output_height)". (Note that the test -should NOT be against image_height, unless you never use scaling. The -image_height field is the height of the original unscaled image.) -The return value always equals the change in the value of output_scanline. - -If you don't use a suspending data source, it is safe to assume that -jpeg_read_scanlines() reads at least one scanline per call, until the -bottom of the image has been reached. - -If you use a buffer larger than one scanline, it is NOT safe to assume that -jpeg_read_scanlines() fills it. (The current implementation returns only a -few scanlines per call, no matter how large a buffer you pass.) So you must -always provide a loop that calls jpeg_read_scanlines() repeatedly until the -whole image has been read. - - -7. jpeg_finish_decompress(...); - -After all the image data has been read, call jpeg_finish_decompress() to -complete the decompression cycle. This causes working memory associated -with the JPEG object to be released. - -Typical code: - - jpeg_finish_decompress(&cinfo); - -If using the stdio source manager, don't forget to close the source stdio -stream if necessary. - -It is an error to call jpeg_finish_decompress() before reading the correct -total number of scanlines. If you wish to abort decompression, call -jpeg_abort() as discussed below. - -After completing a decompression cycle, you may dispose of the JPEG object as -discussed next, or you may use it to decompress another image. In that case -return to step 2 or 3 as appropriate. If you do not change the source -manager, the next image will be read from the same source. - - -8. Release the JPEG decompression object. - -When you are done with a JPEG decompression object, destroy it by calling -jpeg_destroy_decompress() or jpeg_destroy(). The previous discussion of -destroying compression objects applies here too. - -Typical code: - - jpeg_destroy_decompress(&cinfo); - - -9. Aborting. - -You can abort a decompression cycle by calling jpeg_destroy_decompress() or -jpeg_destroy() if you don't need the JPEG object any more, or -jpeg_abort_decompress() or jpeg_abort() if you want to reuse the object. -The previous discussion of aborting compression cycles applies here too. - - -Mechanics of usage: include files, linking, etc ------------------------------------------------ - -Applications using the JPEG library should include the header file jpeglib.h -to obtain declarations of data types and routines. Before including -jpeglib.h, include system headers that define at least the typedefs FILE and -size_t. On ANSI-conforming systems, including is sufficient; on -older Unix systems, you may need to define size_t. - -If the application needs to refer to individual JPEG library error codes, also -include jerror.h to define those symbols. - -jpeglib.h indirectly includes the files jconfig.h and jmorecfg.h. If you are -installing the JPEG header files in a system directory, you will want to -install all four files: jpeglib.h, jerror.h, jconfig.h, jmorecfg.h. - -The most convenient way to include the JPEG code into your executable program -is to prepare a library file ("libjpeg.a", or a corresponding name on non-Unix -machines) and reference it at your link step. If you use only half of the -library (only compression or only decompression), only that much code will be -included from the library, unless your linker is hopelessly brain-damaged. -The supplied makefiles build libjpeg.a automatically (see install.txt). - -While you can build the JPEG library as a shared library if the whim strikes -you, we don't really recommend it. The trouble with shared libraries is that -at some point you'll probably try to substitute a new version of the library -without recompiling the calling applications. That generally doesn't work -because the parameter struct declarations usually change with each new -version. In other words, the library's API is *not* guaranteed binary -compatible across versions; we only try to ensure source-code compatibility. -(In hindsight, it might have been smarter to hide the parameter structs from -applications and introduce a ton of access functions instead. Too late now, -however.) - -On some systems your application may need to set up a signal handler to ensure -that temporary files are deleted if the program is interrupted. This is most -critical if you are on MS-DOS and use the jmemdos.c memory manager back end; -it will try to grab extended memory for temp files, and that space will NOT be -freed automatically. See cjpeg.c or djpeg.c for an example signal handler. - -It may be worth pointing out that the core JPEG library does not actually -require the stdio library: only the default source/destination managers and -error handler need it. You can use the library in a stdio-less environment -if you replace those modules and use jmemnobs.c (or another memory manager of -your own devising). More info about the minimum system library requirements -may be found in jinclude.h. - - -ADVANCED FEATURES -================= - -Compression parameter selection -------------------------------- - -This section describes all the optional parameters you can set for JPEG -compression, as well as the "helper" routines provided to assist in this -task. Proper setting of some parameters requires detailed understanding -of the JPEG standard; if you don't know what a parameter is for, it's best -not to mess with it! See REFERENCES in the README file for pointers to -more info about JPEG. - -It's a good idea to call jpeg_set_defaults() first, even if you plan to set -all the parameters; that way your code is more likely to work with future JPEG -libraries that have additional parameters. For the same reason, we recommend -you use a helper routine where one is provided, in preference to twiddling -cinfo fields directly. - -The helper routines are: - -jpeg_set_defaults (j_compress_ptr cinfo) - This routine sets all JPEG parameters to reasonable defaults, using - only the input image's color space (field in_color_space, which must - already be set in cinfo). Many applications will only need to use - this routine and perhaps jpeg_set_quality(). - -jpeg_set_colorspace (j_compress_ptr cinfo, J_COLOR_SPACE colorspace) - Sets the JPEG file's colorspace (field jpeg_color_space) as specified, - and sets other color-space-dependent parameters appropriately. See - "Special color spaces", below, before using this. A large number of - parameters, including all per-component parameters, are set by this - routine; if you want to twiddle individual parameters you should call - jpeg_set_colorspace() before rather than after. - -jpeg_default_colorspace (j_compress_ptr cinfo) - Selects an appropriate JPEG colorspace based on cinfo->in_color_space, - and calls jpeg_set_colorspace(). This is actually a subroutine of - jpeg_set_defaults(). It's broken out in case you want to change - just the colorspace-dependent JPEG parameters. - -jpeg_set_quality (j_compress_ptr cinfo, int quality, boolean force_baseline) - Constructs JPEG quantization tables appropriate for the indicated - quality setting. The quality value is expressed on the 0..100 scale - recommended by IJG (cjpeg's "-quality" switch uses this routine). - Note that the exact mapping from quality values to tables may change - in future IJG releases as more is learned about DCT quantization. - If the force_baseline parameter is TRUE, then the quantization table - entries are constrained to the range 1..255 for full JPEG baseline - compatibility. In the current implementation, this only makes a - difference for quality settings below 25, and it effectively prevents - very small/low quality files from being generated. The IJG decoder - is capable of reading the non-baseline files generated at low quality - settings when force_baseline is FALSE, but other decoders may not be. - -jpeg_set_linear_quality (j_compress_ptr cinfo, int scale_factor, - boolean force_baseline) - Same as jpeg_set_quality() except that the generated tables are the - sample tables given in the JPEC spec section K.1, multiplied by the - specified scale factor (which is expressed as a percentage; thus - scale_factor = 100 reproduces the spec's tables). Note that larger - scale factors give lower quality. This entry point is useful for - conforming to the Adobe PostScript DCT conventions, but we do not - recommend linear scaling as a user-visible quality scale otherwise. - force_baseline again constrains the computed table entries to 1..255. - -int jpeg_quality_scaling (int quality) - Converts a value on the IJG-recommended quality scale to a linear - scaling percentage. Note that this routine may change or go away - in future releases --- IJG may choose to adopt a scaling method that - can't be expressed as a simple scalar multiplier, in which case the - premise of this routine collapses. Caveat user. - -jpeg_default_qtables (j_compress_ptr cinfo, boolean force_baseline) - Set default quantization tables with linear q_scale_factor[] values - (see below). - -jpeg_add_quant_table (j_compress_ptr cinfo, int which_tbl, - const unsigned int *basic_table, - int scale_factor, boolean force_baseline) - Allows an arbitrary quantization table to be created. which_tbl - indicates which table slot to fill. basic_table points to an array - of 64 unsigned ints given in normal array order. These values are - multiplied by scale_factor/100 and then clamped to the range 1..65535 - (or to 1..255 if force_baseline is TRUE). - CAUTION: prior to library version 6a, jpeg_add_quant_table expected - the basic table to be given in JPEG zigzag order. If you need to - write code that works with either older or newer versions of this - routine, you must check the library version number. Something like - "#if JPEG_LIB_VERSION >= 61" is the right test. - -jpeg_simple_progression (j_compress_ptr cinfo) - Generates a default scan script for writing a progressive-JPEG file. - This is the recommended method of creating a progressive file, - unless you want to make a custom scan sequence. You must ensure that - the JPEG color space is set correctly before calling this routine. - - -Compression parameters (cinfo fields) include: - -int block_size - Set DCT block size. All N from 1 to 16 are possible. - Default is 8 (baseline format). - Larger values produce higher compression, - smaller values produce higher quality. - An exact DCT stage is possible with 1 or 2. - With the default quality of 75 and default Luminance qtable - the DCT+Quantization stage is lossless for value 1. - Note that values other than 8 require a SmartScale capable decoder, - introduced with IJG JPEG 8. Setting the block_size parameter for - compression works with version 8c and later. - -J_DCT_METHOD dct_method - Selects the algorithm used for the DCT step. Choices are: - JDCT_ISLOW: slow but accurate integer algorithm - JDCT_IFAST: faster, less accurate integer method - JDCT_FLOAT: floating-point method - JDCT_DEFAULT: default method (normally JDCT_ISLOW) - JDCT_FASTEST: fastest method (normally JDCT_IFAST) - The FLOAT method is very slightly more accurate than the ISLOW method, - but may give different results on different machines due to varying - roundoff behavior. The integer methods should give the same results - on all machines. On machines with sufficiently fast FP hardware, the - floating-point method may also be the fastest. The IFAST method is - considerably less accurate than the other two; its use is not - recommended if high quality is a concern. JDCT_DEFAULT and - JDCT_FASTEST are macros configurable by each installation. - -unsigned int scale_num, scale_denom - Scale the image by the fraction scale_num/scale_denom. Default is - 1/1, or no scaling. Currently, the supported scaling ratios are - M/N with all N from 1 to 16, where M is the destination DCT size, - which is 8 by default (see block_size parameter above). - (The library design allows for arbitrary scaling ratios but this - is not likely to be implemented any time soon.) - -J_COLOR_SPACE jpeg_color_space -int num_components - The JPEG color space and corresponding number of components; see - "Special color spaces", below, for more info. We recommend using - jpeg_set_color_space() if you want to change these. - -boolean optimize_coding - TRUE causes the compressor to compute optimal Huffman coding tables - for the image. This requires an extra pass over the data and - therefore costs a good deal of space and time. The default is - FALSE, which tells the compressor to use the supplied or default - Huffman tables. In most cases optimal tables save only a few percent - of file size compared to the default tables. Note that when this is - TRUE, you need not supply Huffman tables at all, and any you do - supply will be overwritten. - -unsigned int restart_interval -int restart_in_rows - To emit restart markers in the JPEG file, set one of these nonzero. - Set restart_interval to specify the exact interval in MCU blocks. - Set restart_in_rows to specify the interval in MCU rows. (If - restart_in_rows is not 0, then restart_interval is set after the - image width in MCUs is computed.) Defaults are zero (no restarts). - One restart marker per MCU row is often a good choice. - NOTE: the overhead of restart markers is higher in grayscale JPEG - files than in color files, and MUCH higher in progressive JPEGs. - If you use restarts, you may want to use larger intervals in those - cases. - -const jpeg_scan_info * scan_info -int num_scans - By default, scan_info is NULL; this causes the compressor to write a - single-scan sequential JPEG file. If not NULL, scan_info points to - an array of scan definition records of length num_scans. The - compressor will then write a JPEG file having one scan for each scan - definition record. This is used to generate noninterleaved or - progressive JPEG files. The library checks that the scan array - defines a valid JPEG scan sequence. (jpeg_simple_progression creates - a suitable scan definition array for progressive JPEG.) This is - discussed further under "Progressive JPEG support". - -boolean do_fancy_downsampling - If TRUE, use direct DCT scaling with DCT size > 8 for downsampling - of chroma components. - If FALSE, use only DCT size <= 8 and simple separate downsampling. - Default is TRUE. - For better image stability in multiple generation compression cycles - it is preferable that this value matches the corresponding - do_fancy_upsampling value in decompression. - -int smoothing_factor - If non-zero, the input image is smoothed; the value should be 1 for - minimal smoothing to 100 for maximum smoothing. Consult jcsample.c - for details of the smoothing algorithm. The default is zero. - -boolean write_JFIF_header - If TRUE, a JFIF APP0 marker is emitted. jpeg_set_defaults() and - jpeg_set_colorspace() set this TRUE if a JFIF-legal JPEG color space - (ie, YCbCr or grayscale) is selected, otherwise FALSE. - -UINT8 JFIF_major_version -UINT8 JFIF_minor_version - The version number to be written into the JFIF marker. - jpeg_set_defaults() initializes the version to 1.01 (major=minor=1). - You should set it to 1.02 (major=1, minor=2) if you plan to write - any JFIF 1.02 extension markers. - -UINT8 density_unit -UINT16 X_density -UINT16 Y_density - The resolution information to be written into the JFIF marker; - not used otherwise. density_unit may be 0 for unknown, - 1 for dots/inch, or 2 for dots/cm. The default values are 0,1,1 - indicating square pixels of unknown size. - -boolean write_Adobe_marker - If TRUE, an Adobe APP14 marker is emitted. jpeg_set_defaults() and - jpeg_set_colorspace() set this TRUE if JPEG color space RGB, CMYK, - or YCCK is selected, otherwise FALSE. It is generally a bad idea - to set both write_JFIF_header and write_Adobe_marker. In fact, - you probably shouldn't change the default settings at all --- the - default behavior ensures that the JPEG file's color space can be - recognized by the decoder. - -JQUANT_TBL * quant_tbl_ptrs[NUM_QUANT_TBLS] - Pointers to coefficient quantization tables, one per table slot, - or NULL if no table is defined for a slot. Usually these should - be set via one of the above helper routines; jpeg_add_quant_table() - is general enough to define any quantization table. The other - routines will set up table slot 0 for luminance quality and table - slot 1 for chrominance. - -int q_scale_factor[NUM_QUANT_TBLS] - Linear quantization scaling factors (percentage, initialized 100) - for use with jpeg_default_qtables(). - See rdswitch.c and cjpeg.c for an example of usage. - Note that the q_scale_factor[] fields are the "linear" scales, so you - have to convert from user-defined ratings via jpeg_quality_scaling(). - Here is an example code which corresponds to cjpeg -quality 90,70: - - jpeg_set_defaults(cinfo); - - /* Set luminance quality 90. */ - cinfo->q_scale_factor[0] = jpeg_quality_scaling(90); - /* Set chrominance quality 70. */ - cinfo->q_scale_factor[1] = jpeg_quality_scaling(70); - - jpeg_default_qtables(cinfo, force_baseline); - - CAUTION: You must also set 1x1 subsampling for efficient separate - color quality selection, since the default value used by library - is 2x2: - - cinfo->comp_info[0].v_samp_factor = 1; - cinfo->comp_info[0].h_samp_factor = 1; - -JHUFF_TBL * dc_huff_tbl_ptrs[NUM_HUFF_TBLS] -JHUFF_TBL * ac_huff_tbl_ptrs[NUM_HUFF_TBLS] - Pointers to Huffman coding tables, one per table slot, or NULL if - no table is defined for a slot. Slots 0 and 1 are filled with the - JPEG sample tables by jpeg_set_defaults(). If you need to allocate - more table structures, jpeg_alloc_huff_table() may be used. - Note that optimal Huffman tables can be computed for an image - by setting optimize_coding, as discussed above; there's seldom - any need to mess with providing your own Huffman tables. - - -The actual dimensions of the JPEG image that will be written to the file are -given by the following fields. These are computed from the input image -dimensions and the compression parameters by jpeg_start_compress(). You can -also call jpeg_calc_jpeg_dimensions() to obtain the values that will result -from the current parameter settings. This can be useful if you are trying -to pick a scaling ratio that will get close to a desired target size. - -JDIMENSION jpeg_width Actual dimensions of output image. -JDIMENSION jpeg_height - - -Per-component parameters are stored in the struct cinfo.comp_info[i] for -component number i. Note that components here refer to components of the -JPEG color space, *not* the source image color space. A suitably large -comp_info[] array is allocated by jpeg_set_defaults(); if you choose not -to use that routine, it's up to you to allocate the array. - -int component_id - The one-byte identifier code to be recorded in the JPEG file for - this component. For the standard color spaces, we recommend you - leave the default values alone. - -int h_samp_factor -int v_samp_factor - Horizontal and vertical sampling factors for the component; must - be 1..4 according to the JPEG standard. Note that larger sampling - factors indicate a higher-resolution component; many people find - this behavior quite unintuitive. The default values are 2,2 for - luminance components and 1,1 for chrominance components, except - for grayscale where 1,1 is used. - -int quant_tbl_no - Quantization table number for component. The default value is - 0 for luminance components and 1 for chrominance components. - -int dc_tbl_no -int ac_tbl_no - DC and AC entropy coding table numbers. The default values are - 0 for luminance components and 1 for chrominance components. - -int component_index - Must equal the component's index in comp_info[]. (Beginning in - release v6, the compressor library will fill this in automatically; - you don't have to.) - - -Decompression parameter selection ---------------------------------- - -Decompression parameter selection is somewhat simpler than compression -parameter selection, since all of the JPEG internal parameters are -recorded in the source file and need not be supplied by the application. -(Unless you are working with abbreviated files, in which case see -"Abbreviated datastreams", below.) Decompression parameters control -the postprocessing done on the image to deliver it in a format suitable -for the application's use. Many of the parameters control speed/quality -tradeoffs, in which faster decompression may be obtained at the price of -a poorer-quality image. The defaults select the highest quality (slowest) -processing. - -The following fields in the JPEG object are set by jpeg_read_header() and -may be useful to the application in choosing decompression parameters: - -JDIMENSION image_width Width and height of image -JDIMENSION image_height -int num_components Number of color components -J_COLOR_SPACE jpeg_color_space Colorspace of image -boolean saw_JFIF_marker TRUE if a JFIF APP0 marker was seen - UINT8 JFIF_major_version Version information from JFIF marker - UINT8 JFIF_minor_version - UINT8 density_unit Resolution data from JFIF marker - UINT16 X_density - UINT16 Y_density -boolean saw_Adobe_marker TRUE if an Adobe APP14 marker was seen - UINT8 Adobe_transform Color transform code from Adobe marker - -The JPEG color space, unfortunately, is something of a guess since the JPEG -standard proper does not provide a way to record it. In practice most files -adhere to the JFIF or Adobe conventions, and the decoder will recognize these -correctly. See "Special color spaces", below, for more info. - - -The decompression parameters that determine the basic properties of the -returned image are: - -J_COLOR_SPACE out_color_space - Output color space. jpeg_read_header() sets an appropriate default - based on jpeg_color_space; typically it will be RGB or grayscale. - The application can change this field to request output in a different - colorspace. For example, set it to JCS_GRAYSCALE to get grayscale - output from a color file. (This is useful for previewing: grayscale - output is faster than full color since the color components need not - be processed.) Note that not all possible color space transforms are - currently implemented; you may need to extend jdcolor.c if you want an - unusual conversion. - -unsigned int scale_num, scale_denom - Scale the image by the fraction scale_num/scale_denom. Currently, - the supported scaling ratios are M/N with all M from 1 to 16, where - N is the source DCT size, which is 8 for baseline JPEG. (The library - design allows for arbitrary scaling ratios but this is not likely - to be implemented any time soon.) The values are initialized by - jpeg_read_header() with the source DCT size. For baseline JPEG - this is 8/8. If you change only the scale_num value while leaving - the other unchanged, then this specifies the DCT scaled size to be - applied on the given input. For baseline JPEG this is equivalent - to M/8 scaling, since the source DCT size for baseline JPEG is 8. - Smaller scaling ratios permit significantly faster decoding since - fewer pixels need be processed and a simpler IDCT method can be used. - -boolean quantize_colors - If set TRUE, colormapped output will be delivered. Default is FALSE, - meaning that full-color output will be delivered. - -The next three parameters are relevant only if quantize_colors is TRUE. - -int desired_number_of_colors - Maximum number of colors to use in generating a library-supplied color - map (the actual number of colors is returned in a different field). - Default 256. Ignored when the application supplies its own color map. - -boolean two_pass_quantize - If TRUE, an extra pass over the image is made to select a custom color - map for the image. This usually looks a lot better than the one-size- - fits-all colormap that is used otherwise. Default is TRUE. Ignored - when the application supplies its own color map. - -J_DITHER_MODE dither_mode - Selects color dithering method. Supported values are: - JDITHER_NONE no dithering: fast, very low quality - JDITHER_ORDERED ordered dither: moderate speed and quality - JDITHER_FS Floyd-Steinberg dither: slow, high quality - Default is JDITHER_FS. (At present, ordered dither is implemented - only in the single-pass, standard-colormap case. If you ask for - ordered dither when two_pass_quantize is TRUE or when you supply - an external color map, you'll get F-S dithering.) - -When quantize_colors is TRUE, the target color map is described by the next -two fields. colormap is set to NULL by jpeg_read_header(). The application -can supply a color map by setting colormap non-NULL and setting -actual_number_of_colors to the map size. Otherwise, jpeg_start_decompress() -selects a suitable color map and sets these two fields itself. -[Implementation restriction: at present, an externally supplied colormap is -only accepted for 3-component output color spaces.] - -JSAMPARRAY colormap - The color map, represented as a 2-D pixel array of out_color_components - rows and actual_number_of_colors columns. Ignored if not quantizing. - CAUTION: if the JPEG library creates its own colormap, the storage - pointed to by this field is released by jpeg_finish_decompress(). - Copy the colormap somewhere else first, if you want to save it. - -int actual_number_of_colors - The number of colors in the color map. - -Additional decompression parameters that the application may set include: - -J_DCT_METHOD dct_method - Selects the algorithm used for the DCT step. Choices are the same - as described above for compression. - -boolean do_fancy_upsampling - If TRUE, use direct DCT scaling with DCT size > 8 for upsampling - of chroma components. - If FALSE, use only DCT size <= 8 and simple separate upsampling. - Default is TRUE. - For better image stability in multiple generation compression cycles - it is preferable that this value matches the corresponding - do_fancy_downsampling value in compression. - -boolean do_block_smoothing - If TRUE, interblock smoothing is applied in early stages of decoding - progressive JPEG files; if FALSE, not. Default is TRUE. Early - progression stages look "fuzzy" with smoothing, "blocky" without. - In any case, block smoothing ceases to be applied after the first few - AC coefficients are known to full accuracy, so it is relevant only - when using buffered-image mode for progressive images. - -boolean enable_1pass_quant -boolean enable_external_quant -boolean enable_2pass_quant - These are significant only in buffered-image mode, which is - described in its own section below. - - -The output image dimensions are given by the following fields. These are -computed from the source image dimensions and the decompression parameters -by jpeg_start_decompress(). You can also call jpeg_calc_output_dimensions() -to obtain the values that will result from the current parameter settings. -This can be useful if you are trying to pick a scaling ratio that will get -close to a desired target size. It's also important if you are using the -JPEG library's memory manager to allocate output buffer space, because you -are supposed to request such buffers *before* jpeg_start_decompress(). - -JDIMENSION output_width Actual dimensions of output image. -JDIMENSION output_height -int out_color_components Number of color components in out_color_space. -int output_components Number of color components returned. -int rec_outbuf_height Recommended height of scanline buffer. - -When quantizing colors, output_components is 1, indicating a single color map -index per pixel. Otherwise it equals out_color_components. The output arrays -are required to be output_width * output_components JSAMPLEs wide. - -rec_outbuf_height is the recommended minimum height (in scanlines) of the -buffer passed to jpeg_read_scanlines(). If the buffer is smaller, the -library will still work, but time will be wasted due to unnecessary data -copying. In high-quality modes, rec_outbuf_height is always 1, but some -faster, lower-quality modes set it to larger values (typically 2 to 4). -If you are going to ask for a high-speed processing mode, you may as well -go to the trouble of honoring rec_outbuf_height so as to avoid data copying. -(An output buffer larger than rec_outbuf_height lines is OK, but won't -provide any material speed improvement over that height.) - - -Special color spaces --------------------- - -The JPEG standard itself is "color blind" and doesn't specify any particular -color space. It is customary to convert color data to a luminance/chrominance -color space before compressing, since this permits greater compression. The -existing de-facto JPEG file format standards specify YCbCr or grayscale data -(JFIF), or grayscale, RGB, YCbCr, CMYK, or YCCK (Adobe). For special -applications such as multispectral images, other color spaces can be used, -but it must be understood that such files will be unportable. - -The JPEG library can handle the most common colorspace conversions (namely -RGB <=> YCbCr and CMYK <=> YCCK). It can also deal with data of an unknown -color space, passing it through without conversion. If you deal extensively -with an unusual color space, you can easily extend the library to understand -additional color spaces and perform appropriate conversions. - -For compression, the source data's color space is specified by field -in_color_space. This is transformed to the JPEG file's color space given -by jpeg_color_space. jpeg_set_defaults() chooses a reasonable JPEG color -space depending on in_color_space, but you can override this by calling -jpeg_set_colorspace(). Of course you must select a supported transformation. -jccolor.c currently supports the following transformations: - RGB => YCbCr - RGB => GRAYSCALE - YCbCr => GRAYSCALE - CMYK => YCCK -plus the null transforms: GRAYSCALE => GRAYSCALE, RGB => RGB, -YCbCr => YCbCr, CMYK => CMYK, YCCK => YCCK, and UNKNOWN => UNKNOWN. - -The de-facto file format standards (JFIF and Adobe) specify APPn markers that -indicate the color space of the JPEG file. It is important to ensure that -these are written correctly, or omitted if the JPEG file's color space is not -one of the ones supported by the de-facto standards. jpeg_set_colorspace() -will set the compression parameters to include or omit the APPn markers -properly, so long as it is told the truth about the JPEG color space. -For example, if you are writing some random 3-component color space without -conversion, don't try to fake out the library by setting in_color_space and -jpeg_color_space to JCS_YCbCr; use JCS_UNKNOWN. You may want to write an -APPn marker of your own devising to identify the colorspace --- see "Special -markers", below. - -When told that the color space is UNKNOWN, the library will default to using -luminance-quality compression parameters for all color components. You may -well want to change these parameters. See the source code for -jpeg_set_colorspace(), in jcparam.c, for details. - -For decompression, the JPEG file's color space is given in jpeg_color_space, -and this is transformed to the output color space out_color_space. -jpeg_read_header's setting of jpeg_color_space can be relied on if the file -conforms to JFIF or Adobe conventions, but otherwise it is no better than a -guess. If you know the JPEG file's color space for certain, you can override -jpeg_read_header's guess by setting jpeg_color_space. jpeg_read_header also -selects a default output color space based on (its guess of) jpeg_color_space; -set out_color_space to override this. Again, you must select a supported -transformation. jdcolor.c currently supports - YCbCr => RGB - YCbCr => GRAYSCALE - RGB => GRAYSCALE - GRAYSCALE => RGB - YCCK => CMYK -as well as the null transforms. (Since GRAYSCALE=>RGB is provided, an -application can force grayscale JPEGs to look like color JPEGs if it only -wants to handle one case.) - -The two-pass color quantizer, jquant2.c, is specialized to handle RGB data -(it weights distances appropriately for RGB colors). You'll need to modify -the code if you want to use it for non-RGB output color spaces. Note that -jquant2.c is used to map to an application-supplied colormap as well as for -the normal two-pass colormap selection process. - -CAUTION: it appears that Adobe Photoshop writes inverted data in CMYK JPEG -files: 0 represents 100% ink coverage, rather than 0% ink as you'd expect. -This is arguably a bug in Photoshop, but if you need to work with Photoshop -CMYK files, you will have to deal with it in your application. We cannot -"fix" this in the library by inverting the data during the CMYK<=>YCCK -transform, because that would break other applications, notably Ghostscript. -Photoshop versions prior to 3.0 write EPS files containing JPEG-encoded CMYK -data in the same inverted-YCCK representation used in bare JPEG files, but -the surrounding PostScript code performs an inversion using the PS image -operator. I am told that Photoshop 3.0 will write uninverted YCCK in -EPS/JPEG files, and will omit the PS-level inversion. (But the data -polarity used in bare JPEG files will not change in 3.0.) In either case, -the JPEG library must not invert the data itself, or else Ghostscript would -read these EPS files incorrectly. - - -Error handling --------------- - -When the default error handler is used, any error detected inside the JPEG -routines will cause a message to be printed on stderr, followed by exit(). -You can supply your own error handling routines to override this behavior -and to control the treatment of nonfatal warnings and trace/debug messages. -The file example.c illustrates the most common case, which is to have the -application regain control after an error rather than exiting. - -The JPEG library never writes any message directly; it always goes through -the error handling routines. Three classes of messages are recognized: - * Fatal errors: the library cannot continue. - * Warnings: the library can continue, but the data is corrupt, and a - damaged output image is likely to result. - * Trace/informational messages. These come with a trace level indicating - the importance of the message; you can control the verbosity of the - program by adjusting the maximum trace level that will be displayed. - -You may, if you wish, simply replace the entire JPEG error handling module -(jerror.c) with your own code. However, you can avoid code duplication by -only replacing some of the routines depending on the behavior you need. -This is accomplished by calling jpeg_std_error() as usual, but then overriding -some of the method pointers in the jpeg_error_mgr struct, as illustrated by -example.c. - -All of the error handling routines will receive a pointer to the JPEG object -(a j_common_ptr which points to either a jpeg_compress_struct or a -jpeg_decompress_struct; if you need to tell which, test the is_decompressor -field). This struct includes a pointer to the error manager struct in its -"err" field. Frequently, custom error handler routines will need to access -additional data which is not known to the JPEG library or the standard error -handler. The most convenient way to do this is to embed either the JPEG -object or the jpeg_error_mgr struct in a larger structure that contains -additional fields; then casting the passed pointer provides access to the -additional fields. Again, see example.c for one way to do it. (Beginning -with IJG version 6b, there is also a void pointer "client_data" in each -JPEG object, which the application can also use to find related data. -The library does not touch client_data at all.) - -The individual methods that you might wish to override are: - -error_exit (j_common_ptr cinfo) - Receives control for a fatal error. Information sufficient to - generate the error message has been stored in cinfo->err; call - output_message to display it. Control must NOT return to the caller; - generally this routine will exit() or longjmp() somewhere. - Typically you would override this routine to get rid of the exit() - default behavior. Note that if you continue processing, you should - clean up the JPEG object with jpeg_abort() or jpeg_destroy(). - -output_message (j_common_ptr cinfo) - Actual output of any JPEG message. Override this to send messages - somewhere other than stderr. Note that this method does not know - how to generate a message, only where to send it. - -format_message (j_common_ptr cinfo, char * buffer) - Constructs a readable error message string based on the error info - stored in cinfo->err. This method is called by output_message. Few - applications should need to override this method. One possible - reason for doing so is to implement dynamic switching of error message - language. - -emit_message (j_common_ptr cinfo, int msg_level) - Decide whether or not to emit a warning or trace message; if so, - calls output_message. The main reason for overriding this method - would be to abort on warnings. msg_level is -1 for warnings, - 0 and up for trace messages. - -Only error_exit() and emit_message() are called from the rest of the JPEG -library; the other two are internal to the error handler. - -The actual message texts are stored in an array of strings which is pointed to -by the field err->jpeg_message_table. The messages are numbered from 0 to -err->last_jpeg_message, and it is these code numbers that are used in the -JPEG library code. You could replace the message texts (for instance, with -messages in French or German) by changing the message table pointer. See -jerror.h for the default texts. CAUTION: this table will almost certainly -change or grow from one library version to the next. - -It may be useful for an application to add its own message texts that are -handled by the same mechanism. The error handler supports a second "add-on" -message table for this purpose. To define an addon table, set the pointer -err->addon_message_table and the message numbers err->first_addon_message and -err->last_addon_message. If you number the addon messages beginning at 1000 -or so, you won't have to worry about conflicts with the library's built-in -messages. See the sample applications cjpeg/djpeg for an example of using -addon messages (the addon messages are defined in cderror.h). - -Actual invocation of the error handler is done via macros defined in jerror.h: - ERREXITn(...) for fatal errors - WARNMSn(...) for corrupt-data warnings - TRACEMSn(...) for trace and informational messages. -These macros store the message code and any additional parameters into the -error handler struct, then invoke the error_exit() or emit_message() method. -The variants of each macro are for varying numbers of additional parameters. -The additional parameters are inserted into the generated message using -standard printf() format codes. - -See jerror.h and jerror.c for further details. - - -Compressed data handling (source and destination managers) ----------------------------------------------------------- - -The JPEG compression library sends its compressed data to a "destination -manager" module. The default destination manager just writes the data to a -memory buffer or to a stdio stream, but you can provide your own manager to -do something else. Similarly, the decompression library calls a "source -manager" to obtain the compressed data; you can provide your own source -manager if you want the data to come from somewhere other than a memory -buffer or a stdio stream. - -In both cases, compressed data is processed a bufferload at a time: the -destination or source manager provides a work buffer, and the library invokes -the manager only when the buffer is filled or emptied. (You could define a -one-character buffer to force the manager to be invoked for each byte, but -that would be rather inefficient.) The buffer's size and location are -controlled by the manager, not by the library. For example, the memory -source manager just makes the buffer pointer and length point to the original -data in memory. In this case the buffer-reload procedure will be invoked -only if the decompressor ran off the end of the datastream, which would -indicate an erroneous datastream. - -The work buffer is defined as an array of datatype JOCTET, which is generally -"char" or "unsigned char". On a machine where char is not exactly 8 bits -wide, you must define JOCTET as a wider data type and then modify the data -source and destination modules to transcribe the work arrays into 8-bit units -on external storage. - -A data destination manager struct contains a pointer and count defining the -next byte to write in the work buffer and the remaining free space: - - JOCTET * next_output_byte; /* => next byte to write in buffer */ - size_t free_in_buffer; /* # of byte spaces remaining in buffer */ - -The library increments the pointer and decrements the count until the buffer -is filled. The manager's empty_output_buffer method must reset the pointer -and count. The manager is expected to remember the buffer's starting address -and total size in private fields not visible to the library. - -A data destination manager provides three methods: - -init_destination (j_compress_ptr cinfo) - Initialize destination. This is called by jpeg_start_compress() - before any data is actually written. It must initialize - next_output_byte and free_in_buffer. free_in_buffer must be - initialized to a positive value. - -empty_output_buffer (j_compress_ptr cinfo) - This is called whenever the buffer has filled (free_in_buffer - reaches zero). In typical applications, it should write out the - *entire* buffer (use the saved start address and buffer length; - ignore the current state of next_output_byte and free_in_buffer). - Then reset the pointer & count to the start of the buffer, and - return TRUE indicating that the buffer has been dumped. - free_in_buffer must be set to a positive value when TRUE is - returned. A FALSE return should only be used when I/O suspension is - desired (this operating mode is discussed in the next section). - -term_destination (j_compress_ptr cinfo) - Terminate destination --- called by jpeg_finish_compress() after all - data has been written. In most applications, this must flush any - data remaining in the buffer. Use either next_output_byte or - free_in_buffer to determine how much data is in the buffer. - -term_destination() is NOT called by jpeg_abort() or jpeg_destroy(). If you -want the destination manager to be cleaned up during an abort, you must do it -yourself. - -You will also need code to create a jpeg_destination_mgr struct, fill in its -method pointers, and insert a pointer to the struct into the "dest" field of -the JPEG compression object. This can be done in-line in your setup code if -you like, but it's probably cleaner to provide a separate routine similar to -the jpeg_stdio_dest() or jpeg_mem_dest() routines of the supplied destination -managers. - -Decompression source managers follow a parallel design, but with some -additional frammishes. The source manager struct contains a pointer and count -defining the next byte to read from the work buffer and the number of bytes -remaining: - - const JOCTET * next_input_byte; /* => next byte to read from buffer */ - size_t bytes_in_buffer; /* # of bytes remaining in buffer */ - -The library increments the pointer and decrements the count until the buffer -is emptied. The manager's fill_input_buffer method must reset the pointer and -count. In most applications, the manager must remember the buffer's starting -address and total size in private fields not visible to the library. - -A data source manager provides five methods: - -init_source (j_decompress_ptr cinfo) - Initialize source. This is called by jpeg_read_header() before any - data is actually read. Unlike init_destination(), it may leave - bytes_in_buffer set to 0 (in which case a fill_input_buffer() call - will occur immediately). - -fill_input_buffer (j_decompress_ptr cinfo) - This is called whenever bytes_in_buffer has reached zero and more - data is wanted. In typical applications, it should read fresh data - into the buffer (ignoring the current state of next_input_byte and - bytes_in_buffer), reset the pointer & count to the start of the - buffer, and return TRUE indicating that the buffer has been reloaded. - It is not necessary to fill the buffer entirely, only to obtain at - least one more byte. bytes_in_buffer MUST be set to a positive value - if TRUE is returned. A FALSE return should only be used when I/O - suspension is desired (this mode is discussed in the next section). - -skip_input_data (j_decompress_ptr cinfo, long num_bytes) - Skip num_bytes worth of data. The buffer pointer and count should - be advanced over num_bytes input bytes, refilling the buffer as - needed. This is used to skip over a potentially large amount of - uninteresting data (such as an APPn marker). In some applications - it may be possible to optimize away the reading of the skipped data, - but it's not clear that being smart is worth much trouble; large - skips are uncommon. bytes_in_buffer may be zero on return. - A zero or negative skip count should be treated as a no-op. - -resync_to_restart (j_decompress_ptr cinfo, int desired) - This routine is called only when the decompressor has failed to find - a restart (RSTn) marker where one is expected. Its mission is to - find a suitable point for resuming decompression. For most - applications, we recommend that you just use the default resync - procedure, jpeg_resync_to_restart(). However, if you are able to back - up in the input data stream, or if you have a-priori knowledge about - the likely location of restart markers, you may be able to do better. - Read the read_restart_marker() and jpeg_resync_to_restart() routines - in jdmarker.c if you think you'd like to implement your own resync - procedure. - -term_source (j_decompress_ptr cinfo) - Terminate source --- called by jpeg_finish_decompress() after all - data has been read. Often a no-op. - -For both fill_input_buffer() and skip_input_data(), there is no such thing -as an EOF return. If the end of the file has been reached, the routine has -a choice of exiting via ERREXIT() or inserting fake data into the buffer. -In most cases, generating a warning message and inserting a fake EOI marker -is the best course of action --- this will allow the decompressor to output -however much of the image is there. In pathological cases, the decompressor -may swallow the EOI and again demand data ... just keep feeding it fake EOIs. -jdatasrc.c illustrates the recommended error recovery behavior. - -term_source() is NOT called by jpeg_abort() or jpeg_destroy(). If you want -the source manager to be cleaned up during an abort, you must do it yourself. - -You will also need code to create a jpeg_source_mgr struct, fill in its method -pointers, and insert a pointer to the struct into the "src" field of the JPEG -decompression object. This can be done in-line in your setup code if you -like, but it's probably cleaner to provide a separate routine similar to the -jpeg_stdio_src() or jpeg_mem_src() routines of the supplied source managers. - -For more information, consult the memory and stdio source and destination -managers in jdatasrc.c and jdatadst.c. - - -I/O suspension --------------- - -Some applications need to use the JPEG library as an incremental memory-to- -memory filter: when the compressed data buffer is filled or emptied, they want -control to return to the outer loop, rather than expecting that the buffer can -be emptied or reloaded within the data source/destination manager subroutine. -The library supports this need by providing an "I/O suspension" mode, which we -describe in this section. - -The I/O suspension mode is not a panacea: nothing is guaranteed about the -maximum amount of time spent in any one call to the library, so it will not -eliminate response-time problems in single-threaded applications. If you -need guaranteed response time, we suggest you "bite the bullet" and implement -a real multi-tasking capability. - -To use I/O suspension, cooperation is needed between the calling application -and the data source or destination manager; you will always need a custom -source/destination manager. (Please read the previous section if you haven't -already.) The basic idea is that the empty_output_buffer() or -fill_input_buffer() routine is a no-op, merely returning FALSE to indicate -that it has done nothing. Upon seeing this, the JPEG library suspends -operation and returns to its caller. The surrounding application is -responsible for emptying or refilling the work buffer before calling the -JPEG library again. - -Compression suspension: - -For compression suspension, use an empty_output_buffer() routine that returns -FALSE; typically it will not do anything else. This will cause the -compressor to return to the caller of jpeg_write_scanlines(), with the return -value indicating that not all the supplied scanlines have been accepted. -The application must make more room in the output buffer, adjust the output -buffer pointer/count appropriately, and then call jpeg_write_scanlines() -again, pointing to the first unconsumed scanline. - -When forced to suspend, the compressor will backtrack to a convenient stopping -point (usually the start of the current MCU); it will regenerate some output -data when restarted. Therefore, although empty_output_buffer() is only -called when the buffer is filled, you should NOT write out the entire buffer -after a suspension. Write only the data up to the current position of -next_output_byte/free_in_buffer. The data beyond that point will be -regenerated after resumption. - -Because of the backtracking behavior, a good-size output buffer is essential -for efficiency; you don't want the compressor to suspend often. (In fact, an -overly small buffer could lead to infinite looping, if a single MCU required -more data than would fit in the buffer.) We recommend a buffer of at least -several Kbytes. You may want to insert explicit code to ensure that you don't -call jpeg_write_scanlines() unless there is a reasonable amount of space in -the output buffer; in other words, flush the buffer before trying to compress -more data. - -The compressor does not allow suspension while it is trying to write JPEG -markers at the beginning and end of the file. This means that: - * At the beginning of a compression operation, there must be enough free - space in the output buffer to hold the header markers (typically 600 or - so bytes). The recommended buffer size is bigger than this anyway, so - this is not a problem as long as you start with an empty buffer. However, - this restriction might catch you if you insert large special markers, such - as a JFIF thumbnail image, without flushing the buffer afterwards. - * When you call jpeg_finish_compress(), there must be enough space in the - output buffer to emit any buffered data and the final EOI marker. In the - current implementation, half a dozen bytes should suffice for this, but - for safety's sake we recommend ensuring that at least 100 bytes are free - before calling jpeg_finish_compress(). - -A more significant restriction is that jpeg_finish_compress() cannot suspend. -This means you cannot use suspension with multi-pass operating modes, namely -Huffman code optimization and multiple-scan output. Those modes write the -whole file during jpeg_finish_compress(), which will certainly result in -buffer overrun. (Note that this restriction applies only to compression, -not decompression. The decompressor supports input suspension in all of its -operating modes.) - -Decompression suspension: - -For decompression suspension, use a fill_input_buffer() routine that simply -returns FALSE (except perhaps during error recovery, as discussed below). -This will cause the decompressor to return to its caller with an indication -that suspension has occurred. This can happen at four places: - * jpeg_read_header(): will return JPEG_SUSPENDED. - * jpeg_start_decompress(): will return FALSE, rather than its usual TRUE. - * jpeg_read_scanlines(): will return the number of scanlines already - completed (possibly 0). - * jpeg_finish_decompress(): will return FALSE, rather than its usual TRUE. -The surrounding application must recognize these cases, load more data into -the input buffer, and repeat the call. In the case of jpeg_read_scanlines(), -increment the passed pointers past any scanlines successfully read. - -Just as with compression, the decompressor will typically backtrack to a -convenient restart point before suspending. When fill_input_buffer() is -called, next_input_byte/bytes_in_buffer point to the current restart point, -which is where the decompressor will backtrack to if FALSE is returned. -The data beyond that position must NOT be discarded if you suspend; it needs -to be re-read upon resumption. In most implementations, you'll need to shift -this data down to the start of your work buffer and then load more data after -it. Again, this behavior means that a several-Kbyte work buffer is essential -for decent performance; furthermore, you should load a reasonable amount of -new data before resuming decompression. (If you loaded, say, only one new -byte each time around, you could waste a LOT of cycles.) - -The skip_input_data() source manager routine requires special care in a -suspension scenario. This routine is NOT granted the ability to suspend the -decompressor; it can decrement bytes_in_buffer to zero, but no more. If the -requested skip distance exceeds the amount of data currently in the input -buffer, then skip_input_data() must set bytes_in_buffer to zero and record the -additional skip distance somewhere else. The decompressor will immediately -call fill_input_buffer(), which should return FALSE, which will cause a -suspension return. The surrounding application must then arrange to discard -the recorded number of bytes before it resumes loading the input buffer. -(Yes, this design is rather baroque, but it avoids complexity in the far more -common case where a non-suspending source manager is used.) - -If the input data has been exhausted, we recommend that you emit a warning -and insert dummy EOI markers just as a non-suspending data source manager -would do. This can be handled either in the surrounding application logic or -within fill_input_buffer(); the latter is probably more efficient. If -fill_input_buffer() knows that no more data is available, it can set the -pointer/count to point to a dummy EOI marker and then return TRUE just as -though it had read more data in a non-suspending situation. - -The decompressor does not attempt to suspend within standard JPEG markers; -instead it will backtrack to the start of the marker and reprocess the whole -marker next time. Hence the input buffer must be large enough to hold the -longest standard marker in the file. Standard JPEG markers should normally -not exceed a few hundred bytes each (DHT tables are typically the longest). -We recommend at least a 2K buffer for performance reasons, which is much -larger than any correct marker is likely to be. For robustness against -damaged marker length counts, you may wish to insert a test in your -application for the case that the input buffer is completely full and yet -the decoder has suspended without consuming any data --- otherwise, if this -situation did occur, it would lead to an endless loop. (The library can't -provide this test since it has no idea whether "the buffer is full", or -even whether there is a fixed-size input buffer.) - -The input buffer would need to be 64K to allow for arbitrary COM or APPn -markers, but these are handled specially: they are either saved into allocated -memory, or skipped over by calling skip_input_data(). In the former case, -suspension is handled correctly, and in the latter case, the problem of -buffer overrun is placed on skip_input_data's shoulders, as explained above. -Note that if you provide your own marker handling routine for large markers, -you should consider how to deal with buffer overflow. - -Multiple-buffer management: - -In some applications it is desirable to store the compressed data in a linked -list of buffer areas, so as to avoid data copying. This can be handled by -having empty_output_buffer() or fill_input_buffer() set the pointer and count -to reference the next available buffer; FALSE is returned only if no more -buffers are available. Although seemingly straightforward, there is a -pitfall in this approach: the backtrack that occurs when FALSE is returned -could back up into an earlier buffer. For example, when fill_input_buffer() -is called, the current pointer & count indicate the backtrack restart point. -Since fill_input_buffer() will set the pointer and count to refer to a new -buffer, the restart position must be saved somewhere else. Suppose a second -call to fill_input_buffer() occurs in the same library call, and no -additional input data is available, so fill_input_buffer must return FALSE. -If the JPEG library has not moved the pointer/count forward in the current -buffer, then *the correct restart point is the saved position in the prior -buffer*. Prior buffers may be discarded only after the library establishes -a restart point within a later buffer. Similar remarks apply for output into -a chain of buffers. - -The library will never attempt to backtrack over a skip_input_data() call, -so any skipped data can be permanently discarded. You still have to deal -with the case of skipping not-yet-received data, however. - -It's much simpler to use only a single buffer; when fill_input_buffer() is -called, move any unconsumed data (beyond the current pointer/count) down to -the beginning of this buffer and then load new data into the remaining buffer -space. This approach requires a little more data copying but is far easier -to get right. - - -Progressive JPEG support ------------------------- - -Progressive JPEG rearranges the stored data into a series of scans of -increasing quality. In situations where a JPEG file is transmitted across a -slow communications link, a decoder can generate a low-quality image very -quickly from the first scan, then gradually improve the displayed quality as -more scans are received. The final image after all scans are complete is -identical to that of a regular (sequential) JPEG file of the same quality -setting. Progressive JPEG files are often slightly smaller than equivalent -sequential JPEG files, but the possibility of incremental display is the main -reason for using progressive JPEG. - -The IJG encoder library generates progressive JPEG files when given a -suitable "scan script" defining how to divide the data into scans. -Creation of progressive JPEG files is otherwise transparent to the encoder. -Progressive JPEG files can also be read transparently by the decoder library. -If the decoding application simply uses the library as defined above, it -will receive a final decoded image without any indication that the file was -progressive. Of course, this approach does not allow incremental display. -To perform incremental display, an application needs to use the decoder -library's "buffered-image" mode, in which it receives a decoded image -multiple times. - -Each displayed scan requires about as much work to decode as a full JPEG -image of the same size, so the decoder must be fairly fast in relation to the -data transmission rate in order to make incremental display useful. However, -it is possible to skip displaying the image and simply add the incoming bits -to the decoder's coefficient buffer. This is fast because only Huffman -decoding need be done, not IDCT, upsampling, colorspace conversion, etc. -The IJG decoder library allows the application to switch dynamically between -displaying the image and simply absorbing the incoming bits. A properly -coded application can automatically adapt the number of display passes to -suit the time available as the image is received. Also, a final -higher-quality display cycle can be performed from the buffered data after -the end of the file is reached. - -Progressive compression: - -To create a progressive JPEG file (or a multiple-scan sequential JPEG file), -set the scan_info cinfo field to point to an array of scan descriptors, and -perform compression as usual. Instead of constructing your own scan list, -you can call the jpeg_simple_progression() helper routine to create a -recommended progression sequence; this method should be used by all -applications that don't want to get involved in the nitty-gritty of -progressive scan sequence design. (If you want to provide user control of -scan sequences, you may wish to borrow the scan script reading code found -in rdswitch.c, so that you can read scan script files just like cjpeg's.) -When scan_info is not NULL, the compression library will store DCT'd data -into a buffer array as jpeg_write_scanlines() is called, and will emit all -the requested scans during jpeg_finish_compress(). This implies that -multiple-scan output cannot be created with a suspending data destination -manager, since jpeg_finish_compress() does not support suspension. We -should also note that the compressor currently forces Huffman optimization -mode when creating a progressive JPEG file, because the default Huffman -tables are unsuitable for progressive files. - -Progressive decompression: - -When buffered-image mode is not used, the decoder library will read all of -a multi-scan file during jpeg_start_decompress(), so that it can provide a -final decoded image. (Here "multi-scan" means either progressive or -multi-scan sequential.) This makes multi-scan files transparent to the -decoding application. However, existing applications that used suspending -input with version 5 of the IJG library will need to be modified to check -for a suspension return from jpeg_start_decompress(). - -To perform incremental display, an application must use the library's -buffered-image mode. This is described in the next section. - - -Buffered-image mode -------------------- - -In buffered-image mode, the library stores the partially decoded image in a -coefficient buffer, from which it can be read out as many times as desired. -This mode is typically used for incremental display of progressive JPEG files, -but it can be used with any JPEG file. Each scan of a progressive JPEG file -adds more data (more detail) to the buffered image. The application can -display in lockstep with the source file (one display pass per input scan), -or it can allow input processing to outrun display processing. By making -input and display processing run independently, it is possible for the -application to adapt progressive display to a wide range of data transmission -rates. - -The basic control flow for buffered-image decoding is - - jpeg_create_decompress() - set data source - jpeg_read_header() - set overall decompression parameters - cinfo.buffered_image = TRUE; /* select buffered-image mode */ - jpeg_start_decompress() - for (each output pass) { - adjust output decompression parameters if required - jpeg_start_output() /* start a new output pass */ - for (all scanlines in image) { - jpeg_read_scanlines() - display scanlines - } - jpeg_finish_output() /* terminate output pass */ - } - jpeg_finish_decompress() - jpeg_destroy_decompress() - -This differs from ordinary unbuffered decoding in that there is an additional -level of looping. The application can choose how many output passes to make -and how to display each pass. - -The simplest approach to displaying progressive images is to do one display -pass for each scan appearing in the input file. In this case the outer loop -condition is typically - while (! jpeg_input_complete(&cinfo)) -and the start-output call should read - jpeg_start_output(&cinfo, cinfo.input_scan_number); -The second parameter to jpeg_start_output() indicates which scan of the input -file is to be displayed; the scans are numbered starting at 1 for this -purpose. (You can use a loop counter starting at 1 if you like, but using -the library's input scan counter is easier.) The library automatically reads -data as necessary to complete each requested scan, and jpeg_finish_output() -advances to the next scan or end-of-image marker (hence input_scan_number -will be incremented by the time control arrives back at jpeg_start_output()). -With this technique, data is read from the input file only as needed, and -input and output processing run in lockstep. - -After reading the final scan and reaching the end of the input file, the -buffered image remains available; it can be read additional times by -repeating the jpeg_start_output()/jpeg_read_scanlines()/jpeg_finish_output() -sequence. For example, a useful technique is to use fast one-pass color -quantization for display passes made while the image is arriving, followed by -a final display pass using two-pass quantization for highest quality. This -is done by changing the library parameters before the final output pass. -Changing parameters between passes is discussed in detail below. - -In general the last scan of a progressive file cannot be recognized as such -until after it is read, so a post-input display pass is the best approach if -you want special processing in the final pass. - -When done with the image, be sure to call jpeg_finish_decompress() to release -the buffered image (or just use jpeg_destroy_decompress()). - -If input data arrives faster than it can be displayed, the application can -cause the library to decode input data in advance of what's needed to produce -output. This is done by calling the routine jpeg_consume_input(). -The return value is one of the following: - JPEG_REACHED_SOS: reached an SOS marker (the start of a new scan) - JPEG_REACHED_EOI: reached the EOI marker (end of image) - JPEG_ROW_COMPLETED: completed reading one MCU row of compressed data - JPEG_SCAN_COMPLETED: completed reading last MCU row of current scan - JPEG_SUSPENDED: suspended before completing any of the above -(JPEG_SUSPENDED can occur only if a suspending data source is used.) This -routine can be called at any time after initializing the JPEG object. It -reads some additional data and returns when one of the indicated significant -events occurs. (If called after the EOI marker is reached, it will -immediately return JPEG_REACHED_EOI without attempting to read more data.) - -The library's output processing will automatically call jpeg_consume_input() -whenever the output processing overtakes the input; thus, simple lockstep -display requires no direct calls to jpeg_consume_input(). But by adding -calls to jpeg_consume_input(), you can absorb data in advance of what is -being displayed. This has two benefits: - * You can limit buildup of unprocessed data in your input buffer. - * You can eliminate extra display passes by paying attention to the - state of the library's input processing. - -The first of these benefits only requires interspersing calls to -jpeg_consume_input() with your display operations and any other processing -you may be doing. To avoid wasting cycles due to backtracking, it's best to -call jpeg_consume_input() only after a hundred or so new bytes have arrived. -This is discussed further under "I/O suspension", above. (Note: the JPEG -library currently is not thread-safe. You must not call jpeg_consume_input() -from one thread of control if a different library routine is working on the -same JPEG object in another thread.) - -When input arrives fast enough that more than one new scan is available -before you start a new output pass, you may as well skip the output pass -corresponding to the completed scan. This occurs for free if you pass -cinfo.input_scan_number as the target scan number to jpeg_start_output(). -The input_scan_number field is simply the index of the scan currently being -consumed by the input processor. You can ensure that this is up-to-date by -emptying the input buffer just before calling jpeg_start_output(): call -jpeg_consume_input() repeatedly until it returns JPEG_SUSPENDED or -JPEG_REACHED_EOI. - -The target scan number passed to jpeg_start_output() is saved in the -cinfo.output_scan_number field. The library's output processing calls -jpeg_consume_input() whenever the current input scan number and row within -that scan is less than or equal to the current output scan number and row. -Thus, input processing can "get ahead" of the output processing but is not -allowed to "fall behind". You can achieve several different effects by -manipulating this interlock rule. For example, if you pass a target scan -number greater than the current input scan number, the output processor will -wait until that scan starts to arrive before producing any output. (To avoid -an infinite loop, the target scan number is automatically reset to the last -scan number when the end of image is reached. Thus, if you specify a large -target scan number, the library will just absorb the entire input file and -then perform an output pass. This is effectively the same as what -jpeg_start_decompress() does when you don't select buffered-image mode.) -When you pass a target scan number equal to the current input scan number, -the image is displayed no faster than the current input scan arrives. The -final possibility is to pass a target scan number less than the current input -scan number; this disables the input/output interlock and causes the output -processor to simply display whatever it finds in the image buffer, without -waiting for input. (However, the library will not accept a target scan -number less than one, so you can't avoid waiting for the first scan.) - -When data is arriving faster than the output display processing can advance -through the image, jpeg_consume_input() will store data into the buffered -image beyond the point at which the output processing is reading data out -again. If the input arrives fast enough, it may "wrap around" the buffer to -the point where the input is more than one whole scan ahead of the output. -If the output processing simply proceeds through its display pass without -paying attention to the input, the effect seen on-screen is that the lower -part of the image is one or more scans better in quality than the upper part. -Then, when the next output scan is started, you have a choice of what target -scan number to use. The recommended choice is to use the current input scan -number at that time, which implies that you've skipped the output scans -corresponding to the input scans that were completed while you processed the -previous output scan. In this way, the decoder automatically adapts its -speed to the arriving data, by skipping output scans as necessary to keep up -with the arriving data. - -When using this strategy, you'll want to be sure that you perform a final -output pass after receiving all the data; otherwise your last display may not -be full quality across the whole screen. So the right outer loop logic is -something like this: - do { - absorb any waiting input by calling jpeg_consume_input() - final_pass = jpeg_input_complete(&cinfo); - adjust output decompression parameters if required - jpeg_start_output(&cinfo, cinfo.input_scan_number); - ... - jpeg_finish_output() - } while (! final_pass); -rather than quitting as soon as jpeg_input_complete() returns TRUE. This -arrangement makes it simple to use higher-quality decoding parameters -for the final pass. But if you don't want to use special parameters for -the final pass, the right loop logic is like this: - for (;;) { - absorb any waiting input by calling jpeg_consume_input() - jpeg_start_output(&cinfo, cinfo.input_scan_number); - ... - jpeg_finish_output() - if (jpeg_input_complete(&cinfo) && - cinfo.input_scan_number == cinfo.output_scan_number) - break; - } -In this case you don't need to know in advance whether an output pass is to -be the last one, so it's not necessary to have reached EOF before starting -the final output pass; rather, what you want to test is whether the output -pass was performed in sync with the final input scan. This form of the loop -will avoid an extra output pass whenever the decoder is able (or nearly able) -to keep up with the incoming data. - -When the data transmission speed is high, you might begin a display pass, -then find that much or all of the file has arrived before you can complete -the pass. (You can detect this by noting the JPEG_REACHED_EOI return code -from jpeg_consume_input(), or equivalently by testing jpeg_input_complete().) -In this situation you may wish to abort the current display pass and start a -new one using the newly arrived information. To do so, just call -jpeg_finish_output() and then start a new pass with jpeg_start_output(). - -A variant strategy is to abort and restart display if more than one complete -scan arrives during an output pass; this can be detected by noting -JPEG_REACHED_SOS returns and/or examining cinfo.input_scan_number. This -idea should be employed with caution, however, since the display process -might never get to the bottom of the image before being aborted, resulting -in the lower part of the screen being several passes worse than the upper. -In most cases it's probably best to abort an output pass only if the whole -file has arrived and you want to begin the final output pass immediately. - -When receiving data across a communication link, we recommend always using -the current input scan number for the output target scan number; if a -higher-quality final pass is to be done, it should be started (aborting any -incomplete output pass) as soon as the end of file is received. However, -many other strategies are possible. For example, the application can examine -the parameters of the current input scan and decide whether to display it or -not. If the scan contains only chroma data, one might choose not to use it -as the target scan, expecting that the scan will be small and will arrive -quickly. To skip to the next scan, call jpeg_consume_input() until it -returns JPEG_REACHED_SOS or JPEG_REACHED_EOI. Or just use the next higher -number as the target scan for jpeg_start_output(); but that method doesn't -let you inspect the next scan's parameters before deciding to display it. - - -In buffered-image mode, jpeg_start_decompress() never performs input and -thus never suspends. An application that uses input suspension with -buffered-image mode must be prepared for suspension returns from these -routines: -* jpeg_start_output() performs input only if you request 2-pass quantization - and the target scan isn't fully read yet. (This is discussed below.) -* jpeg_read_scanlines(), as always, returns the number of scanlines that it - was able to produce before suspending. -* jpeg_finish_output() will read any markers following the target scan, - up to the end of the file or the SOS marker that begins another scan. - (But it reads no input if jpeg_consume_input() has already reached the - end of the file or a SOS marker beyond the target output scan.) -* jpeg_finish_decompress() will read until the end of file, and thus can - suspend if the end hasn't already been reached (as can be tested by - calling jpeg_input_complete()). -jpeg_start_output(), jpeg_finish_output(), and jpeg_finish_decompress() -all return TRUE if they completed their tasks, FALSE if they had to suspend. -In the event of a FALSE return, the application must load more input data -and repeat the call. Applications that use non-suspending data sources need -not check the return values of these three routines. - - -It is possible to change decoding parameters between output passes in the -buffered-image mode. The decoder library currently supports only very -limited changes of parameters. ONLY THE FOLLOWING parameter changes are -allowed after jpeg_start_decompress() is called: -* dct_method can be changed before each call to jpeg_start_output(). - For example, one could use a fast DCT method for early scans, changing - to a higher quality method for the final scan. -* dither_mode can be changed before each call to jpeg_start_output(); - of course this has no impact if not using color quantization. Typically - one would use ordered dither for initial passes, then switch to - Floyd-Steinberg dither for the final pass. Caution: changing dither mode - can cause more memory to be allocated by the library. Although the amount - of memory involved is not large (a scanline or so), it may cause the - initial max_memory_to_use specification to be exceeded, which in the worst - case would result in an out-of-memory failure. -* do_block_smoothing can be changed before each call to jpeg_start_output(). - This setting is relevant only when decoding a progressive JPEG image. - During the first DC-only scan, block smoothing provides a very "fuzzy" look - instead of the very "blocky" look seen without it; which is better seems a - matter of personal taste. But block smoothing is nearly always a win - during later stages, especially when decoding a successive-approximation - image: smoothing helps to hide the slight blockiness that otherwise shows - up on smooth gradients until the lowest coefficient bits are sent. -* Color quantization mode can be changed under the rules described below. - You *cannot* change between full-color and quantized output (because that - would alter the required I/O buffer sizes), but you can change which - quantization method is used. - -When generating color-quantized output, changing quantization method is a -very useful way of switching between high-speed and high-quality display. -The library allows you to change among its three quantization methods: -1. Single-pass quantization to a fixed color cube. - Selected by cinfo.two_pass_quantize = FALSE and cinfo.colormap = NULL. -2. Single-pass quantization to an application-supplied colormap. - Selected by setting cinfo.colormap to point to the colormap (the value of - two_pass_quantize is ignored); also set cinfo.actual_number_of_colors. -3. Two-pass quantization to a colormap chosen specifically for the image. - Selected by cinfo.two_pass_quantize = TRUE and cinfo.colormap = NULL. - (This is the default setting selected by jpeg_read_header, but it is - probably NOT what you want for the first pass of progressive display!) -These methods offer successively better quality and lesser speed. However, -only the first method is available for quantizing in non-RGB color spaces. - -IMPORTANT: because the different quantizer methods have very different -working-storage requirements, the library requires you to indicate which -one(s) you intend to use before you call jpeg_start_decompress(). (If we did -not require this, the max_memory_to_use setting would be a complete fiction.) -You do this by setting one or more of these three cinfo fields to TRUE: - enable_1pass_quant Fixed color cube colormap - enable_external_quant Externally-supplied colormap - enable_2pass_quant Two-pass custom colormap -All three are initialized FALSE by jpeg_read_header(). But -jpeg_start_decompress() automatically sets TRUE the one selected by the -current two_pass_quantize and colormap settings, so you only need to set the -enable flags for any other quantization methods you plan to change to later. - -After setting the enable flags correctly at jpeg_start_decompress() time, you -can change to any enabled quantization method by setting two_pass_quantize -and colormap properly just before calling jpeg_start_output(). The following -special rules apply: -1. You must explicitly set cinfo.colormap to NULL when switching to 1-pass - or 2-pass mode from a different mode, or when you want the 2-pass - quantizer to be re-run to generate a new colormap. -2. To switch to an external colormap, or to change to a different external - colormap than was used on the prior pass, you must call - jpeg_new_colormap() after setting cinfo.colormap. -NOTE: if you want to use the same colormap as was used in the prior pass, -you should not do either of these things. This will save some nontrivial -switchover costs. -(These requirements exist because cinfo.colormap will always be non-NULL -after completing a prior output pass, since both the 1-pass and 2-pass -quantizers set it to point to their output colormaps. Thus you have to -do one of these two things to notify the library that something has changed. -Yup, it's a bit klugy, but it's necessary to do it this way for backwards -compatibility.) - -Note that in buffered-image mode, the library generates any requested colormap -during jpeg_start_output(), not during jpeg_start_decompress(). - -When using two-pass quantization, jpeg_start_output() makes a pass over the -buffered image to determine the optimum color map; it therefore may take a -significant amount of time, whereas ordinarily it does little work. The -progress monitor hook is called during this pass, if defined. It is also -important to realize that if the specified target scan number is greater than -or equal to the current input scan number, jpeg_start_output() will attempt -to consume input as it makes this pass. If you use a suspending data source, -you need to check for a FALSE return from jpeg_start_output() under these -conditions. The combination of 2-pass quantization and a not-yet-fully-read -target scan is the only case in which jpeg_start_output() will consume input. - - -Application authors who support buffered-image mode may be tempted to use it -for all JPEG images, even single-scan ones. This will work, but it is -inefficient: there is no need to create an image-sized coefficient buffer for -single-scan images. Requesting buffered-image mode for such an image wastes -memory. Worse, it can cost time on large images, since the buffered data has -to be swapped out or written to a temporary file. If you are concerned about -maximum performance on baseline JPEG files, you should use buffered-image -mode only when the incoming file actually has multiple scans. This can be -tested by calling jpeg_has_multiple_scans(), which will return a correct -result at any time after jpeg_read_header() completes. - -It is also worth noting that when you use jpeg_consume_input() to let input -processing get ahead of output processing, the resulting pattern of access to -the coefficient buffer is quite nonsequential. It's best to use the memory -manager jmemnobs.c if you can (ie, if you have enough real or virtual main -memory). If not, at least make sure that max_memory_to_use is set as high as -possible. If the JPEG memory manager has to use a temporary file, you will -probably see a lot of disk traffic and poor performance. (This could be -improved with additional work on the memory manager, but we haven't gotten -around to it yet.) - -In some applications it may be convenient to use jpeg_consume_input() for all -input processing, including reading the initial markers; that is, you may -wish to call jpeg_consume_input() instead of jpeg_read_header() during -startup. This works, but note that you must check for JPEG_REACHED_SOS and -JPEG_REACHED_EOI return codes as the equivalent of jpeg_read_header's codes. -Once the first SOS marker has been reached, you must call -jpeg_start_decompress() before jpeg_consume_input() will consume more input; -it'll just keep returning JPEG_REACHED_SOS until you do. If you read a -tables-only file this way, jpeg_consume_input() will return JPEG_REACHED_EOI -without ever returning JPEG_REACHED_SOS; be sure to check for this case. -If this happens, the decompressor will not read any more input until you call -jpeg_abort() to reset it. It is OK to call jpeg_consume_input() even when not -using buffered-image mode, but in that case it's basically a no-op after the -initial markers have been read: it will just return JPEG_SUSPENDED. - - -Abbreviated datastreams and multiple images -------------------------------------------- - -A JPEG compression or decompression object can be reused to process multiple -images. This saves a small amount of time per image by eliminating the -"create" and "destroy" operations, but that isn't the real purpose of the -feature. Rather, reuse of an object provides support for abbreviated JPEG -datastreams. Object reuse can also simplify processing a series of images in -a single input or output file. This section explains these features. - -A JPEG file normally contains several hundred bytes worth of quantization -and Huffman tables. In a situation where many images will be stored or -transmitted with identical tables, this may represent an annoying overhead. -The JPEG standard therefore permits tables to be omitted. The standard -defines three classes of JPEG datastreams: - * "Interchange" datastreams contain an image and all tables needed to decode - the image. These are the usual kind of JPEG file. - * "Abbreviated image" datastreams contain an image, but are missing some or - all of the tables needed to decode that image. - * "Abbreviated table specification" (henceforth "tables-only") datastreams - contain only table specifications. -To decode an abbreviated image, it is necessary to load the missing table(s) -into the decoder beforehand. This can be accomplished by reading a separate -tables-only file. A variant scheme uses a series of images in which the first -image is an interchange (complete) datastream, while subsequent ones are -abbreviated and rely on the tables loaded by the first image. It is assumed -that once the decoder has read a table, it will remember that table until a -new definition for the same table number is encountered. - -It is the application designer's responsibility to figure out how to associate -the correct tables with an abbreviated image. While abbreviated datastreams -can be useful in a closed environment, their use is strongly discouraged in -any situation where data exchange with other applications might be needed. -Caveat designer. - -The JPEG library provides support for reading and writing any combination of -tables-only datastreams and abbreviated images. In both compression and -decompression objects, a quantization or Huffman table will be retained for -the lifetime of the object, unless it is overwritten by a new table definition. - - -To create abbreviated image datastreams, it is only necessary to tell the -compressor not to emit some or all of the tables it is using. Each -quantization and Huffman table struct contains a boolean field "sent_table", -which normally is initialized to FALSE. For each table used by the image, the -header-writing process emits the table and sets sent_table = TRUE unless it is -already TRUE. (In normal usage, this prevents outputting the same table -definition multiple times, as would otherwise occur because the chroma -components typically share tables.) Thus, setting this field to TRUE before -calling jpeg_start_compress() will prevent the table from being written at -all. - -If you want to create a "pure" abbreviated image file containing no tables, -just call "jpeg_suppress_tables(&cinfo, TRUE)" after constructing all the -tables. If you want to emit some but not all tables, you'll need to set the -individual sent_table fields directly. - -To create an abbreviated image, you must also call jpeg_start_compress() -with a second parameter of FALSE, not TRUE. Otherwise jpeg_start_compress() -will force all the sent_table fields to FALSE. (This is a safety feature to -prevent abbreviated images from being created accidentally.) - -To create a tables-only file, perform the same parameter setup that you -normally would, but instead of calling jpeg_start_compress() and so on, call -jpeg_write_tables(&cinfo). This will write an abbreviated datastream -containing only SOI, DQT and/or DHT markers, and EOI. All the quantization -and Huffman tables that are currently defined in the compression object will -be emitted unless their sent_tables flag is already TRUE, and then all the -sent_tables flags will be set TRUE. - -A sure-fire way to create matching tables-only and abbreviated image files -is to proceed as follows: - - create JPEG compression object - set JPEG parameters - set destination to tables-only file - jpeg_write_tables(&cinfo); - set destination to image file - jpeg_start_compress(&cinfo, FALSE); - write data... - jpeg_finish_compress(&cinfo); - -Since the JPEG parameters are not altered between writing the table file and -the abbreviated image file, the same tables are sure to be used. Of course, -you can repeat the jpeg_start_compress() ... jpeg_finish_compress() sequence -many times to produce many abbreviated image files matching the table file. - -You cannot suppress output of the computed Huffman tables when Huffman -optimization is selected. (If you could, there'd be no way to decode the -image...) Generally, you don't want to set optimize_coding = TRUE when -you are trying to produce abbreviated files. - -In some cases you might want to compress an image using tables which are -not stored in the application, but are defined in an interchange or -tables-only file readable by the application. This can be done by setting up -a JPEG decompression object to read the specification file, then copying the -tables into your compression object. See jpeg_copy_critical_parameters() -for an example of copying quantization tables. - - -To read abbreviated image files, you simply need to load the proper tables -into the decompression object before trying to read the abbreviated image. -If the proper tables are stored in the application program, you can just -allocate the table structs and fill in their contents directly. For example, -to load a fixed quantization table into table slot "n": - - if (cinfo.quant_tbl_ptrs[n] == NULL) - cinfo.quant_tbl_ptrs[n] = jpeg_alloc_quant_table((j_common_ptr) &cinfo); - quant_ptr = cinfo.quant_tbl_ptrs[n]; /* quant_ptr is JQUANT_TBL* */ - for (i = 0; i < 64; i++) { - /* Qtable[] is desired quantization table, in natural array order */ - quant_ptr->quantval[i] = Qtable[i]; - } - -Code to load a fixed Huffman table is typically (for AC table "n"): - - if (cinfo.ac_huff_tbl_ptrs[n] == NULL) - cinfo.ac_huff_tbl_ptrs[n] = jpeg_alloc_huff_table((j_common_ptr) &cinfo); - huff_ptr = cinfo.ac_huff_tbl_ptrs[n]; /* huff_ptr is JHUFF_TBL* */ - for (i = 1; i <= 16; i++) { - /* counts[i] is number of Huffman codes of length i bits, i=1..16 */ - huff_ptr->bits[i] = counts[i]; - } - for (i = 0; i < 256; i++) { - /* symbols[] is the list of Huffman symbols, in code-length order */ - huff_ptr->huffval[i] = symbols[i]; - } - -(Note that trying to set cinfo.quant_tbl_ptrs[n] to point directly at a -constant JQUANT_TBL object is not safe. If the incoming file happened to -contain a quantization table definition, your master table would get -overwritten! Instead allocate a working table copy and copy the master table -into it, as illustrated above. Ditto for Huffman tables, of course.) - -You might want to read the tables from a tables-only file, rather than -hard-wiring them into your application. The jpeg_read_header() call is -sufficient to read a tables-only file. You must pass a second parameter of -FALSE to indicate that you do not require an image to be present. Thus, the -typical scenario is - - create JPEG decompression object - set source to tables-only file - jpeg_read_header(&cinfo, FALSE); - set source to abbreviated image file - jpeg_read_header(&cinfo, TRUE); - set decompression parameters - jpeg_start_decompress(&cinfo); - read data... - jpeg_finish_decompress(&cinfo); - -In some cases, you may want to read a file without knowing whether it contains -an image or just tables. In that case, pass FALSE and check the return value -from jpeg_read_header(): it will be JPEG_HEADER_OK if an image was found, -JPEG_HEADER_TABLES_ONLY if only tables were found. (A third return value, -JPEG_SUSPENDED, is possible when using a suspending data source manager.) -Note that jpeg_read_header() will not complain if you read an abbreviated -image for which you haven't loaded the missing tables; the missing-table check -occurs later, in jpeg_start_decompress(). - - -It is possible to read a series of images from a single source file by -repeating the jpeg_read_header() ... jpeg_finish_decompress() sequence, -without releasing/recreating the JPEG object or the data source module. -(If you did reinitialize, any partial bufferload left in the data source -buffer at the end of one image would be discarded, causing you to lose the -start of the next image.) When you use this method, stored tables are -automatically carried forward, so some of the images can be abbreviated images -that depend on tables from earlier images. - -If you intend to write a series of images into a single destination file, -you might want to make a specialized data destination module that doesn't -flush the output buffer at term_destination() time. This would speed things -up by some trifling amount. Of course, you'd need to remember to flush the -buffer after the last image. You can make the later images be abbreviated -ones by passing FALSE to jpeg_start_compress(). - - -Special markers ---------------- - -Some applications may need to insert or extract special data in the JPEG -datastream. The JPEG standard provides marker types "COM" (comment) and -"APP0" through "APP15" (application) to hold application-specific data. -Unfortunately, the use of these markers is not specified by the standard. -COM markers are fairly widely used to hold user-supplied text. The JFIF file -format spec uses APP0 markers with specified initial strings to hold certain -data. Adobe applications use APP14 markers beginning with the string "Adobe" -for miscellaneous data. Other APPn markers are rarely seen, but might -contain almost anything. - -If you wish to store user-supplied text, we recommend you use COM markers -and place readable 7-bit ASCII text in them. Newline conventions are not -standardized --- expect to find LF (Unix style), CR/LF (DOS style), or CR -(Mac style). A robust COM reader should be able to cope with random binary -garbage, including nulls, since some applications generate COM markers -containing non-ASCII junk. (But yours should not be one of them.) - -For program-supplied data, use an APPn marker, and be sure to begin it with an -identifying string so that you can tell whether the marker is actually yours. -It's probably best to avoid using APP0 or APP14 for any private markers. -(NOTE: the upcoming SPIFF standard will use APP8 markers; we recommend you -not use APP8 markers for any private purposes, either.) - -Keep in mind that at most 65533 bytes can be put into one marker, but you -can have as many markers as you like. - -By default, the IJG compression library will write a JFIF APP0 marker if the -selected JPEG colorspace is grayscale or YCbCr, or an Adobe APP14 marker if -the selected colorspace is RGB, CMYK, or YCCK. You can disable this, but -we don't recommend it. The decompression library will recognize JFIF and -Adobe markers and will set the JPEG colorspace properly when one is found. - - -You can write special markers immediately following the datastream header by -calling jpeg_write_marker() after jpeg_start_compress() and before the first -call to jpeg_write_scanlines(). When you do this, the markers appear after -the SOI and the JFIF APP0 and Adobe APP14 markers (if written), but before -all else. Specify the marker type parameter as "JPEG_COM" for COM or -"JPEG_APP0 + n" for APPn. (Actually, jpeg_write_marker will let you write -any marker type, but we don't recommend writing any other kinds of marker.) -For example, to write a user comment string pointed to by comment_text: - jpeg_write_marker(cinfo, JPEG_COM, comment_text, strlen(comment_text)); - -If it's not convenient to store all the marker data in memory at once, -you can instead call jpeg_write_m_header() followed by multiple calls to -jpeg_write_m_byte(). If you do it this way, it's your responsibility to -call jpeg_write_m_byte() exactly the number of times given in the length -parameter to jpeg_write_m_header(). (This method lets you empty the -output buffer partway through a marker, which might be important when -using a suspending data destination module. In any case, if you are using -a suspending destination, you should flush its buffer after inserting -any special markers. See "I/O suspension".) - -Or, if you prefer to synthesize the marker byte sequence yourself, -you can just cram it straight into the data destination module. - -If you are writing JFIF 1.02 extension markers (thumbnail images), don't -forget to set cinfo.JFIF_minor_version = 2 so that the encoder will write the -correct JFIF version number in the JFIF header marker. The library's default -is to write version 1.01, but that's wrong if you insert any 1.02 extension -markers. (We could probably get away with just defaulting to 1.02, but there -used to be broken decoders that would complain about unknown minor version -numbers. To reduce compatibility risks it's safest not to write 1.02 unless -you are actually using 1.02 extensions.) - - -When reading, two methods of handling special markers are available: -1. You can ask the library to save the contents of COM and/or APPn markers -into memory, and then examine them at your leisure afterwards. -2. You can supply your own routine to process COM and/or APPn markers -on-the-fly as they are read. -The first method is simpler to use, especially if you are using a suspending -data source; writing a marker processor that copes with input suspension is -not easy (consider what happens if the marker is longer than your available -input buffer). However, the second method conserves memory since the marker -data need not be kept around after it's been processed. - -For either method, you'd normally set up marker handling after creating a -decompression object and before calling jpeg_read_header(), because the -markers of interest will typically be near the head of the file and so will -be scanned by jpeg_read_header. Once you've established a marker handling -method, it will be used for the life of that decompression object -(potentially many datastreams), unless you change it. Marker handling is -determined separately for COM markers and for each APPn marker code. - - -To save the contents of special markers in memory, call - jpeg_save_markers(cinfo, marker_code, length_limit) -where marker_code is the marker type to save, JPEG_COM or JPEG_APP0+n. -(To arrange to save all the special marker types, you need to call this -routine 17 times, for COM and APP0-APP15.) If the incoming marker is longer -than length_limit data bytes, only length_limit bytes will be saved; this -parameter allows you to avoid chewing up memory when you only need to see the -first few bytes of a potentially large marker. If you want to save all the -data, set length_limit to 0xFFFF; that is enough since marker lengths are only -16 bits. As a special case, setting length_limit to 0 prevents that marker -type from being saved at all. (That is the default behavior, in fact.) - -After jpeg_read_header() completes, you can examine the special markers by -following the cinfo->marker_list pointer chain. All the special markers in -the file appear in this list, in order of their occurrence in the file (but -omitting any markers of types you didn't ask for). Both the original data -length and the saved data length are recorded for each list entry; the latter -will not exceed length_limit for the particular marker type. Note that these -lengths exclude the marker length word, whereas the stored representation -within the JPEG file includes it. (Hence the maximum data length is really -only 65533.) - -It is possible that additional special markers appear in the file beyond the -SOS marker at which jpeg_read_header stops; if so, the marker list will be -extended during reading of the rest of the file. This is not expected to be -common, however. If you are short on memory you may want to reset the length -limit to zero for all marker types after finishing jpeg_read_header, to -ensure that the max_memory_to_use setting cannot be exceeded due to addition -of later markers. - -The marker list remains stored until you call jpeg_finish_decompress or -jpeg_abort, at which point the memory is freed and the list is set to empty. -(jpeg_destroy also releases the storage, of course.) - -Note that the library is internally interested in APP0 and APP14 markers; -if you try to set a small nonzero length limit on these types, the library -will silently force the length up to the minimum it wants. (But you can set -a zero length limit to prevent them from being saved at all.) Also, in a -16-bit environment, the maximum length limit may be constrained to less than -65533 by malloc() limitations. It is therefore best not to assume that the -effective length limit is exactly what you set it to be. - - -If you want to supply your own marker-reading routine, you do it by calling -jpeg_set_marker_processor(). A marker processor routine must have the -signature - boolean jpeg_marker_parser_method (j_decompress_ptr cinfo) -Although the marker code is not explicitly passed, the routine can find it -in cinfo->unread_marker. At the time of call, the marker proper has been -read from the data source module. The processor routine is responsible for -reading the marker length word and the remaining parameter bytes, if any. -Return TRUE to indicate success. (FALSE should be returned only if you are -using a suspending data source and it tells you to suspend. See the standard -marker processors in jdmarker.c for appropriate coding methods if you need to -use a suspending data source.) - -If you override the default APP0 or APP14 processors, it is up to you to -recognize JFIF and Adobe markers if you want colorspace recognition to occur -properly. We recommend copying and extending the default processors if you -want to do that. (A better idea is to save these marker types for later -examination by calling jpeg_save_markers(); that method doesn't interfere -with the library's own processing of these markers.) - -jpeg_set_marker_processor() and jpeg_save_markers() are mutually exclusive ---- if you call one it overrides any previous call to the other, for the -particular marker type specified. - -A simple example of an external COM processor can be found in djpeg.c. -Also, see jpegtran.c for an example of using jpeg_save_markers. - - -Raw (downsampled) image data ----------------------------- - -Some applications need to supply already-downsampled image data to the JPEG -compressor, or to receive raw downsampled data from the decompressor. The -library supports this requirement by allowing the application to write or -read raw data, bypassing the normal preprocessing or postprocessing steps. -The interface is different from the standard one and is somewhat harder to -use. If your interest is merely in bypassing color conversion, we recommend -that you use the standard interface and simply set jpeg_color_space = -in_color_space (or jpeg_color_space = out_color_space for decompression). -The mechanism described in this section is necessary only to supply or -receive downsampled image data, in which not all components have the same -dimensions. - - -To compress raw data, you must supply the data in the colorspace to be used -in the JPEG file (please read the earlier section on Special color spaces) -and downsampled to the sampling factors specified in the JPEG parameters. -You must supply the data in the format used internally by the JPEG library, -namely a JSAMPIMAGE array. This is an array of pointers to two-dimensional -arrays, each of type JSAMPARRAY. Each 2-D array holds the values for one -color component. This structure is necessary since the components are of -different sizes. If the image dimensions are not a multiple of the MCU size, -you must also pad the data correctly (usually, this is done by replicating -the last column and/or row). The data must be padded to a multiple of a DCT -block in each component: that is, each downsampled row must contain a -multiple of 8 valid samples, and there must be a multiple of 8 sample rows -for each component. (For applications such as conversion of digital TV -images, the standard image size is usually a multiple of the DCT block size, -so that no padding need actually be done.) - -The procedure for compression of raw data is basically the same as normal -compression, except that you call jpeg_write_raw_data() in place of -jpeg_write_scanlines(). Before calling jpeg_start_compress(), you must do -the following: - * Set cinfo->raw_data_in to TRUE. (It is set FALSE by jpeg_set_defaults().) - This notifies the library that you will be supplying raw data. - Furthermore, set cinfo->do_fancy_downsampling to FALSE if you want to use - real downsampled data. (It is set TRUE by jpeg_set_defaults().) - * Ensure jpeg_color_space is correct --- an explicit jpeg_set_colorspace() - call is a good idea. Note that since color conversion is bypassed, - in_color_space is ignored, except that jpeg_set_defaults() uses it to - choose the default jpeg_color_space setting. - * Ensure the sampling factors, cinfo->comp_info[i].h_samp_factor and - cinfo->comp_info[i].v_samp_factor, are correct. Since these indicate the - dimensions of the data you are supplying, it's wise to set them - explicitly, rather than assuming the library's defaults are what you want. - -To pass raw data to the library, call jpeg_write_raw_data() in place of -jpeg_write_scanlines(). The two routines work similarly except that -jpeg_write_raw_data takes a JSAMPIMAGE data array rather than JSAMPARRAY. -The scanlines count passed to and returned from jpeg_write_raw_data is -measured in terms of the component with the largest v_samp_factor. - -jpeg_write_raw_data() processes one MCU row per call, which is to say -v_samp_factor*DCTSIZE sample rows of each component. The passed num_lines -value must be at least max_v_samp_factor*DCTSIZE, and the return value will -be exactly that amount (or possibly some multiple of that amount, in future -library versions). This is true even on the last call at the bottom of the -image; don't forget to pad your data as necessary. - -The required dimensions of the supplied data can be computed for each -component as - cinfo->comp_info[i].width_in_blocks*DCTSIZE samples per row - cinfo->comp_info[i].height_in_blocks*DCTSIZE rows in image -after jpeg_start_compress() has initialized those fields. If the valid data -is smaller than this, it must be padded appropriately. For some sampling -factors and image sizes, additional dummy DCT blocks are inserted to make -the image a multiple of the MCU dimensions. The library creates such dummy -blocks itself; it does not read them from your supplied data. Therefore you -need never pad by more than DCTSIZE samples. An example may help here. -Assume 2h2v downsampling of YCbCr data, that is - cinfo->comp_info[0].h_samp_factor = 2 for Y - cinfo->comp_info[0].v_samp_factor = 2 - cinfo->comp_info[1].h_samp_factor = 1 for Cb - cinfo->comp_info[1].v_samp_factor = 1 - cinfo->comp_info[2].h_samp_factor = 1 for Cr - cinfo->comp_info[2].v_samp_factor = 1 -and suppose that the nominal image dimensions (cinfo->image_width and -cinfo->image_height) are 101x101 pixels. Then jpeg_start_compress() will -compute downsampled_width = 101 and width_in_blocks = 13 for Y, -downsampled_width = 51 and width_in_blocks = 7 for Cb and Cr (and the same -for the height fields). You must pad the Y data to at least 13*8 = 104 -columns and rows, the Cb/Cr data to at least 7*8 = 56 columns and rows. The -MCU height is max_v_samp_factor = 2 DCT rows so you must pass at least 16 -scanlines on each call to jpeg_write_raw_data(), which is to say 16 actual -sample rows of Y and 8 each of Cb and Cr. A total of 7 MCU rows are needed, -so you must pass a total of 7*16 = 112 "scanlines". The last DCT block row -of Y data is dummy, so it doesn't matter what you pass for it in the data -arrays, but the scanlines count must total up to 112 so that all of the Cb -and Cr data gets passed. - -Output suspension is supported with raw-data compression: if the data -destination module suspends, jpeg_write_raw_data() will return 0. -In this case the same data rows must be passed again on the next call. - - -Decompression with raw data output implies bypassing all postprocessing. -You must deal with the color space and sampling factors present in the -incoming file. If your application only handles, say, 2h1v YCbCr data, -you must check for and fail on other color spaces or other sampling factors. -The library will not convert to a different color space for you. - -To obtain raw data output, set cinfo->raw_data_out = TRUE before -jpeg_start_decompress() (it is set FALSE by jpeg_read_header()). Be sure to -verify that the color space and sampling factors are ones you can handle. -Furthermore, set cinfo->do_fancy_upsampling = FALSE if you want to get real -downsampled data (it is set TRUE by jpeg_read_header()). -Then call jpeg_read_raw_data() in place of jpeg_read_scanlines(). The -decompression process is otherwise the same as usual. - -jpeg_read_raw_data() returns one MCU row per call, and thus you must pass a -buffer of at least max_v_samp_factor*DCTSIZE scanlines (scanline counting is -the same as for raw-data compression). The buffer you pass must be large -enough to hold the actual data plus padding to DCT-block boundaries. As with -compression, any entirely dummy DCT blocks are not processed so you need not -allocate space for them, but the total scanline count includes them. The -above example of computing buffer dimensions for raw-data compression is -equally valid for decompression. - -Input suspension is supported with raw-data decompression: if the data source -module suspends, jpeg_read_raw_data() will return 0. You can also use -buffered-image mode to read raw data in multiple passes. - - -Really raw data: DCT coefficients ---------------------------------- - -It is possible to read or write the contents of a JPEG file as raw DCT -coefficients. This facility is mainly intended for use in lossless -transcoding between different JPEG file formats. Other possible applications -include lossless cropping of a JPEG image, lossless reassembly of a -multi-strip or multi-tile TIFF/JPEG file into a single JPEG datastream, etc. - -To read the contents of a JPEG file as DCT coefficients, open the file and do -jpeg_read_header() as usual. But instead of calling jpeg_start_decompress() -and jpeg_read_scanlines(), call jpeg_read_coefficients(). This will read the -entire image into a set of virtual coefficient-block arrays, one array per -component. The return value is a pointer to an array of virtual-array -descriptors. Each virtual array can be accessed directly using the JPEG -memory manager's access_virt_barray method (see Memory management, below, -and also read structure.txt's discussion of virtual array handling). Or, -for simple transcoding to a different JPEG file format, the array list can -just be handed directly to jpeg_write_coefficients(). - -Each block in the block arrays contains quantized coefficient values in -normal array order (not JPEG zigzag order). The block arrays contain only -DCT blocks containing real data; any entirely-dummy blocks added to fill out -interleaved MCUs at the right or bottom edges of the image are discarded -during reading and are not stored in the block arrays. (The size of each -block array can be determined from the width_in_blocks and height_in_blocks -fields of the component's comp_info entry.) This is also the data format -expected by jpeg_write_coefficients(). - -When you are done using the virtual arrays, call jpeg_finish_decompress() -to release the array storage and return the decompression object to an idle -state; or just call jpeg_destroy() if you don't need to reuse the object. - -If you use a suspending data source, jpeg_read_coefficients() will return -NULL if it is forced to suspend; a non-NULL return value indicates successful -completion. You need not test for a NULL return value when using a -non-suspending data source. - -It is also possible to call jpeg_read_coefficients() to obtain access to the -decoder's coefficient arrays during a normal decode cycle in buffered-image -mode. This frammish might be useful for progressively displaying an incoming -image and then re-encoding it without loss. To do this, decode in buffered- -image mode as discussed previously, then call jpeg_read_coefficients() after -the last jpeg_finish_output() call. The arrays will be available for your use -until you call jpeg_finish_decompress(). - - -To write the contents of a JPEG file as DCT coefficients, you must provide -the DCT coefficients stored in virtual block arrays. You can either pass -block arrays read from an input JPEG file by jpeg_read_coefficients(), or -allocate virtual arrays from the JPEG compression object and fill them -yourself. In either case, jpeg_write_coefficients() is substituted for -jpeg_start_compress() and jpeg_write_scanlines(). Thus the sequence is - * Create compression object - * Set all compression parameters as necessary - * Request virtual arrays if needed - * jpeg_write_coefficients() - * jpeg_finish_compress() - * Destroy or re-use compression object -jpeg_write_coefficients() is passed a pointer to an array of virtual block -array descriptors; the number of arrays is equal to cinfo.num_components. - -The virtual arrays need only have been requested, not realized, before -jpeg_write_coefficients() is called. A side-effect of -jpeg_write_coefficients() is to realize any virtual arrays that have been -requested from the compression object's memory manager. Thus, when obtaining -the virtual arrays from the compression object, you should fill the arrays -after calling jpeg_write_coefficients(). The data is actually written out -when you call jpeg_finish_compress(); jpeg_write_coefficients() only writes -the file header. - -When writing raw DCT coefficients, it is crucial that the JPEG quantization -tables and sampling factors match the way the data was encoded, or the -resulting file will be invalid. For transcoding from an existing JPEG file, -we recommend using jpeg_copy_critical_parameters(). This routine initializes -all the compression parameters to default values (like jpeg_set_defaults()), -then copies the critical information from a source decompression object. -The decompression object should have just been used to read the entire -JPEG input file --- that is, it should be awaiting jpeg_finish_decompress(). - -jpeg_write_coefficients() marks all tables stored in the compression object -as needing to be written to the output file (thus, it acts like -jpeg_start_compress(cinfo, TRUE)). This is for safety's sake, to avoid -emitting abbreviated JPEG files by accident. If you really want to emit an -abbreviated JPEG file, call jpeg_suppress_tables(), or set the tables' -individual sent_table flags, between calling jpeg_write_coefficients() and -jpeg_finish_compress(). - - -Progress monitoring -------------------- - -Some applications may need to regain control from the JPEG library every so -often. The typical use of this feature is to produce a percent-done bar or -other progress display. (For a simple example, see cjpeg.c or djpeg.c.) -Although you do get control back frequently during the data-transferring pass -(the jpeg_read_scanlines or jpeg_write_scanlines loop), any additional passes -will occur inside jpeg_finish_compress or jpeg_start_decompress; those -routines may take a long time to execute, and you don't get control back -until they are done. - -You can define a progress-monitor routine which will be called periodically -by the library. No guarantees are made about how often this call will occur, -so we don't recommend you use it for mouse tracking or anything like that. -At present, a call will occur once per MCU row, scanline, or sample row -group, whichever unit is convenient for the current processing mode; so the -wider the image, the longer the time between calls. During the data -transferring pass, only one call occurs per call of jpeg_read_scanlines or -jpeg_write_scanlines, so don't pass a large number of scanlines at once if -you want fine resolution in the progress count. (If you really need to use -the callback mechanism for time-critical tasks like mouse tracking, you could -insert additional calls inside some of the library's inner loops.) - -To establish a progress-monitor callback, create a struct jpeg_progress_mgr, -fill in its progress_monitor field with a pointer to your callback routine, -and set cinfo->progress to point to the struct. The callback will be called -whenever cinfo->progress is non-NULL. (This pointer is set to NULL by -jpeg_create_compress or jpeg_create_decompress; the library will not change -it thereafter. So if you allocate dynamic storage for the progress struct, -make sure it will live as long as the JPEG object does. Allocating from the -JPEG memory manager with lifetime JPOOL_PERMANENT will work nicely.) You -can use the same callback routine for both compression and decompression. - -The jpeg_progress_mgr struct contains four fields which are set by the library: - long pass_counter; /* work units completed in this pass */ - long pass_limit; /* total number of work units in this pass */ - int completed_passes; /* passes completed so far */ - int total_passes; /* total number of passes expected */ -During any one pass, pass_counter increases from 0 up to (not including) -pass_limit; the step size is usually but not necessarily 1. The pass_limit -value may change from one pass to another. The expected total number of -passes is in total_passes, and the number of passes already completed is in -completed_passes. Thus the fraction of work completed may be estimated as - completed_passes + (pass_counter/pass_limit) - -------------------------------------------- - total_passes -ignoring the fact that the passes may not be equal amounts of work. - -When decompressing, pass_limit can even change within a pass, because it -depends on the number of scans in the JPEG file, which isn't always known in -advance. The computed fraction-of-work-done may jump suddenly (if the library -discovers it has overestimated the number of scans) or even decrease (in the -opposite case). It is not wise to put great faith in the work estimate. - -When using the decompressor's buffered-image mode, the progress monitor work -estimate is likely to be completely unhelpful, because the library has no way -to know how many output passes will be demanded of it. Currently, the library -sets total_passes based on the assumption that there will be one more output -pass if the input file end hasn't yet been read (jpeg_input_complete() isn't -TRUE), but no more output passes if the file end has been reached when the -output pass is started. This means that total_passes will rise as additional -output passes are requested. If you have a way of determining the input file -size, estimating progress based on the fraction of the file that's been read -will probably be more useful than using the library's value. - - -Memory management ------------------ - -This section covers some key facts about the JPEG library's built-in memory -manager. For more info, please read structure.txt's section about the memory -manager, and consult the source code if necessary. - -All memory and temporary file allocation within the library is done via the -memory manager. If necessary, you can replace the "back end" of the memory -manager to control allocation yourself (for example, if you don't want the -library to use malloc() and free() for some reason). - -Some data is allocated "permanently" and will not be freed until the JPEG -object is destroyed. Most data is allocated "per image" and is freed by -jpeg_finish_compress, jpeg_finish_decompress, or jpeg_abort. You can call the -memory manager yourself to allocate structures that will automatically be -freed at these times. Typical code for this is - ptr = (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, size); -Use JPOOL_PERMANENT to get storage that lasts as long as the JPEG object. -Use alloc_large instead of alloc_small for anything bigger than a few Kbytes. -There are also alloc_sarray and alloc_barray routines that automatically -build 2-D sample or block arrays. - -The library's minimum space requirements to process an image depend on the -image's width, but not on its height, because the library ordinarily works -with "strip" buffers that are as wide as the image but just a few rows high. -Some operating modes (eg, two-pass color quantization) require full-image -buffers. Such buffers are treated as "virtual arrays": only the current strip -need be in memory, and the rest can be swapped out to a temporary file. - -If you use the simplest memory manager back end (jmemnobs.c), then no -temporary files are used; virtual arrays are simply malloc()'d. Images bigger -than memory can be processed only if your system supports virtual memory. -The other memory manager back ends support temporary files of various flavors -and thus work in machines without virtual memory. They may also be useful on -Unix machines if you need to process images that exceed available swap space. - -When using temporary files, the library will make the in-memory buffers for -its virtual arrays just big enough to stay within a "maximum memory" setting. -Your application can set this limit by setting cinfo->mem->max_memory_to_use -after creating the JPEG object. (Of course, there is still a minimum size for -the buffers, so the max-memory setting is effective only if it is bigger than -the minimum space needed.) If you allocate any large structures yourself, you -must allocate them before jpeg_start_compress() or jpeg_start_decompress() in -order to have them counted against the max memory limit. Also keep in mind -that space allocated with alloc_small() is ignored, on the assumption that -it's too small to be worth worrying about; so a reasonable safety margin -should be left when setting max_memory_to_use. - -If you use the jmemname.c or jmemdos.c memory manager back end, it is -important to clean up the JPEG object properly to ensure that the temporary -files get deleted. (This is especially crucial with jmemdos.c, where the -"temporary files" may be extended-memory segments; if they are not freed, -DOS will require a reboot to recover the memory.) Thus, with these memory -managers, it's a good idea to provide a signal handler that will trap any -early exit from your program. The handler should call either jpeg_abort() -or jpeg_destroy() for any active JPEG objects. A handler is not needed with -jmemnobs.c, and shouldn't be necessary with jmemansi.c or jmemmac.c either, -since the C library is supposed to take care of deleting files made with -tmpfile(). - - -Memory usage ------------- - -Working memory requirements while performing compression or decompression -depend on image dimensions, image characteristics (such as colorspace and -JPEG process), and operating mode (application-selected options). - -As of v6b, the decompressor requires: - 1. About 24K in more-or-less-fixed-size data. This varies a bit depending - on operating mode and image characteristics (particularly color vs. - grayscale), but it doesn't depend on image dimensions. - 2. Strip buffers (of size proportional to the image width) for IDCT and - upsampling results. The worst case for commonly used sampling factors - is about 34 bytes * width in pixels for a color image. A grayscale image - only needs about 8 bytes per pixel column. - 3. A full-image DCT coefficient buffer is needed to decode a multi-scan JPEG - file (including progressive JPEGs), or whenever you select buffered-image - mode. This takes 2 bytes/coefficient. At typical 2x2 sampling, that's - 3 bytes per pixel for a color image. Worst case (1x1 sampling) requires - 6 bytes/pixel. For grayscale, figure 2 bytes/pixel. - 4. To perform 2-pass color quantization, the decompressor also needs a - 128K color lookup table and a full-image pixel buffer (3 bytes/pixel). -This does not count any memory allocated by the application, such as a -buffer to hold the final output image. - -The above figures are valid for 8-bit JPEG data precision and a machine with -32-bit ints. For 12-bit JPEG data, double the size of the strip buffers and -quantization pixel buffer. The "fixed-size" data will be somewhat smaller -with 16-bit ints, larger with 64-bit ints. Also, CMYK or other unusual -color spaces will require different amounts of space. - -The full-image coefficient and pixel buffers, if needed at all, do not -have to be fully RAM resident; you can have the library use temporary -files instead when the total memory usage would exceed a limit you set. -(But if your OS supports virtual memory, it's probably better to just use -jmemnobs and let the OS do the swapping.) - -The compressor's memory requirements are similar, except that it has no need -for color quantization. Also, it needs a full-image DCT coefficient buffer -if Huffman-table optimization is asked for, even if progressive mode is not -requested. - -If you need more detailed information about memory usage in a particular -situation, you can enable the MEM_STATS code in jmemmgr.c. - - -Library compile-time options ----------------------------- - -A number of compile-time options are available by modifying jmorecfg.h. - -The JPEG standard provides for both the baseline 8-bit DCT process and -a 12-bit DCT process. The IJG code supports 12-bit JPEG if you define -BITS_IN_JSAMPLE as 12 rather than 8. Note that this causes JSAMPLE to be -larger than a char, so it affects the surrounding application's image data. -The sample applications cjpeg and djpeg can support 12-bit mode only for PPM -and GIF file formats; you must disable the other file formats to compile a -12-bit cjpeg or djpeg. (install.txt has more information about that.) -At present, a 12-bit library can handle *only* 12-bit images, not both -precisions. (If you need to include both 8- and 12-bit libraries in a single -application, you could probably do it by defining NEED_SHORT_EXTERNAL_NAMES -for just one of the copies. You'd have to access the 8-bit and 12-bit copies -from separate application source files. This is untested ... if you try it, -we'd like to hear whether it works!) - -Note that a 12-bit library always compresses in Huffman optimization mode, -in order to generate valid Huffman tables. This is necessary because our -default Huffman tables only cover 8-bit data. If you need to output 12-bit -files in one pass, you'll have to supply suitable default Huffman tables. -You may also want to supply your own DCT quantization tables; the existing -quality-scaling code has been developed for 8-bit use, and probably doesn't -generate especially good tables for 12-bit. - -The maximum number of components (color channels) in the image is determined -by MAX_COMPONENTS. The JPEG standard allows up to 255 components, but we -expect that few applications will need more than four or so. - -On machines with unusual data type sizes, you may be able to improve -performance or reduce memory space by tweaking the various typedefs in -jmorecfg.h. In particular, on some RISC CPUs, access to arrays of "short"s -is quite slow; consider trading memory for speed by making JCOEF, INT16, and -UINT16 be "int" or "unsigned int". UINT8 is also a candidate to become int. -You probably don't want to make JSAMPLE be int unless you have lots of memory -to burn. - -You can reduce the size of the library by compiling out various optional -functions. To do this, undefine xxx_SUPPORTED symbols as necessary. - -You can also save a few K by not having text error messages in the library; -the standard error message table occupies about 5Kb. This is particularly -reasonable for embedded applications where there's no good way to display -a message anyway. To do this, remove the creation of the message table -(jpeg_std_message_table[]) from jerror.c, and alter format_message to do -something reasonable without it. You could output the numeric value of the -message code number, for example. If you do this, you can also save a couple -more K by modifying the TRACEMSn() macros in jerror.h to expand to nothing; -you don't need trace capability anyway, right? - - -Portability considerations --------------------------- - -The JPEG library has been written to be extremely portable; the sample -applications cjpeg and djpeg are slightly less so. This section summarizes -the design goals in this area. (If you encounter any bugs that cause the -library to be less portable than is claimed here, we'd appreciate hearing -about them.) - -The code works fine on ANSI C, C++, and pre-ANSI C compilers, using any of -the popular system include file setups, and some not-so-popular ones too. -See install.txt for configuration procedures. - -The code is not dependent on the exact sizes of the C data types. As -distributed, we make the assumptions that - char is at least 8 bits wide - short is at least 16 bits wide - int is at least 16 bits wide - long is at least 32 bits wide -(These are the minimum requirements of the ANSI C standard.) Wider types will -work fine, although memory may be used inefficiently if char is much larger -than 8 bits or short is much bigger than 16 bits. The code should work -equally well with 16- or 32-bit ints. - -In a system where these assumptions are not met, you may be able to make the -code work by modifying the typedefs in jmorecfg.h. However, you will probably -have difficulty if int is less than 16 bits wide, since references to plain -int abound in the code. - -char can be either signed or unsigned, although the code runs faster if an -unsigned char type is available. If char is wider than 8 bits, you will need -to redefine JOCTET and/or provide custom data source/destination managers so -that JOCTET represents exactly 8 bits of data on external storage. - -The JPEG library proper does not assume ASCII representation of characters. -But some of the image file I/O modules in cjpeg/djpeg do have ASCII -dependencies in file-header manipulation; so does cjpeg's select_file_type() -routine. - -The JPEG library does not rely heavily on the C library. In particular, C -stdio is used only by the data source/destination modules and the error -handler, all of which are application-replaceable. (cjpeg/djpeg are more -heavily dependent on stdio.) malloc and free are called only from the memory -manager "back end" module, so you can use a different memory allocator by -replacing that one file. - -The code generally assumes that C names must be unique in the first 15 -characters. However, global function names can be made unique in the -first 6 characters by defining NEED_SHORT_EXTERNAL_NAMES. - -More info about porting the code may be gleaned by reading jconfig.txt, -jmorecfg.h, and jinclude.h. - - -Notes for MS-DOS implementors ------------------------------ - -The IJG code is designed to work efficiently in 80x86 "small" or "medium" -memory models (i.e., data pointers are 16 bits unless explicitly declared -"far"; code pointers can be either size). You may be able to use small -model to compile cjpeg or djpeg by itself, but you will probably have to use -medium model for any larger application. This won't make much difference in -performance. You *will* take a noticeable performance hit if you use a -large-data memory model (perhaps 10%-25%), and you should avoid "huge" model -if at all possible. - -The JPEG library typically needs 2Kb-3Kb of stack space. It will also -malloc about 20K-30K of near heap space while executing (and lots of far -heap, but that doesn't count in this calculation). This figure will vary -depending on selected operating mode, and to a lesser extent on image size. -There is also about 5Kb-6Kb of constant data which will be allocated in the -near data segment (about 4Kb of this is the error message table). -Thus you have perhaps 20K available for other modules' static data and near -heap space before you need to go to a larger memory model. The C library's -static data will account for several K of this, but that still leaves a good -deal for your needs. (If you are tight on space, you could reduce the sizes -of the I/O buffers allocated by jdatasrc.c and jdatadst.c, say from 4K to -1K. Another possibility is to move the error message table to far memory; -this should be doable with only localized hacking on jerror.c.) - -About 2K of the near heap space is "permanent" memory that will not be -released until you destroy the JPEG object. This is only an issue if you -save a JPEG object between compression or decompression operations. - -Far data space may also be a tight resource when you are dealing with large -images. The most memory-intensive case is decompression with two-pass color -quantization, or single-pass quantization to an externally supplied color -map. This requires a 128Kb color lookup table plus strip buffers amounting -to about 40 bytes per column for typical sampling ratios (eg, about 25600 -bytes for a 640-pixel-wide image). You may not be able to process wide -images if you have large data structures of your own. - -Of course, all of these concerns vanish if you use a 32-bit flat-memory-model -compiler, such as DJGPP or Watcom C. We highly recommend flat model if you -can use it; the JPEG library is significantly faster in flat model. diff --git a/jpeg/ltmain.sh b/jpeg/ltmain.sh deleted file mode 100755 index 63ae69d..0000000 --- a/jpeg/ltmain.sh +++ /dev/null @@ -1,9655 +0,0 @@ - -# libtool (GNU libtool) 2.4.2 -# Written by Gordon Matzigkeit , 1996 - -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, -# 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc. -# This is free software; see the source for copying conditions. There is NO -# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - -# GNU Libtool is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# As a special exception to the GNU General Public License, -# if you distribute this file as part of a program or library that -# is built using GNU Libtool, you may include this file under the -# same distribution terms that you use for the rest of that program. -# -# GNU Libtool is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with GNU Libtool; see the file COPYING. If not, a copy -# can be downloaded from http://www.gnu.org/licenses/gpl.html, -# or obtained by writing to the Free Software Foundation, Inc., -# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. - -# Usage: $progname [OPTION]... [MODE-ARG]... -# -# Provide generalized library-building support services. -# -# --config show all configuration variables -# --debug enable verbose shell tracing -# -n, --dry-run display commands without modifying any files -# --features display basic configuration information and exit -# --mode=MODE use operation mode MODE -# --preserve-dup-deps don't remove duplicate dependency libraries -# --quiet, --silent don't print informational messages -# --no-quiet, --no-silent -# print informational messages (default) -# --no-warn don't display warning messages -# --tag=TAG use configuration variables from tag TAG -# -v, --verbose print more informational messages than default -# --no-verbose don't print the extra informational messages -# --version print version information -# -h, --help, --help-all print short, long, or detailed help message -# -# MODE must be one of the following: -# -# clean remove files from the build directory -# compile compile a source file into a libtool object -# execute automatically set library path, then run a program -# finish complete the installation of libtool libraries -# install install libraries or executables -# link create a library or an executable -# uninstall remove libraries from an installed directory -# -# MODE-ARGS vary depending on the MODE. When passed as first option, -# `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that. -# Try `$progname --help --mode=MODE' for a more detailed description of MODE. -# -# When reporting a bug, please describe a test case to reproduce it and -# include the following information: -# -# host-triplet: $host -# shell: $SHELL -# compiler: $LTCC -# compiler flags: $LTCFLAGS -# linker: $LD (gnu? $with_gnu_ld) -# $progname: (GNU libtool) 2.4.2 -# automake: $automake_version -# autoconf: $autoconf_version -# -# Report bugs to . -# GNU libtool home page: . -# General help using GNU software: . - -PROGRAM=libtool -PACKAGE=libtool -VERSION=2.4.2 -TIMESTAMP="" -package_revision=1.3337 - -# Be Bourne compatible -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac -fi -BIN_SH=xpg4; export BIN_SH # for Tru64 -DUALCASE=1; export DUALCASE # for MKS sh - -# A function that is used when there is no print builtin or printf. -func_fallback_echo () -{ - eval 'cat <<_LTECHO_EOF -$1 -_LTECHO_EOF' -} - -# NLS nuisances: We save the old values to restore during execute mode. -lt_user_locale= -lt_safe_locale= -for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES -do - eval "if test \"\${$lt_var+set}\" = set; then - save_$lt_var=\$$lt_var - $lt_var=C - export $lt_var - lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\" - lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\" - fi" -done -LC_ALL=C -LANGUAGE=C -export LANGUAGE LC_ALL - -$lt_unset CDPATH - - -# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh -# is ksh but when the shell is invoked as "sh" and the current value of -# the _XPG environment variable is not equal to 1 (one), the special -# positional parameter $0, within a function call, is the name of the -# function. -progpath="$0" - - - -: ${CP="cp -f"} -test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'} -: ${MAKE="make"} -: ${MKDIR="mkdir"} -: ${MV="mv -f"} -: ${RM="rm -f"} -: ${SHELL="${CONFIG_SHELL-/bin/sh}"} -: ${Xsed="$SED -e 1s/^X//"} - -# Global variables: -EXIT_SUCCESS=0 -EXIT_FAILURE=1 -EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing. -EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake. - -exit_status=$EXIT_SUCCESS - -# Make sure IFS has a sensible default -lt_nl=' -' -IFS=" $lt_nl" - -dirname="s,/[^/]*$,," -basename="s,^.*/,," - -# func_dirname file append nondir_replacement -# Compute the dirname of FILE. If nonempty, add APPEND to the result, -# otherwise set result to NONDIR_REPLACEMENT. -func_dirname () -{ - func_dirname_result=`$ECHO "${1}" | $SED "$dirname"` - if test "X$func_dirname_result" = "X${1}"; then - func_dirname_result="${3}" - else - func_dirname_result="$func_dirname_result${2}" - fi -} # func_dirname may be replaced by extended shell implementation - - -# func_basename file -func_basename () -{ - func_basename_result=`$ECHO "${1}" | $SED "$basename"` -} # func_basename may be replaced by extended shell implementation - - -# func_dirname_and_basename file append nondir_replacement -# perform func_basename and func_dirname in a single function -# call: -# dirname: Compute the dirname of FILE. If nonempty, -# add APPEND to the result, otherwise set result -# to NONDIR_REPLACEMENT. -# value returned in "$func_dirname_result" -# basename: Compute filename of FILE. -# value retuned in "$func_basename_result" -# Implementation must be kept synchronized with func_dirname -# and func_basename. For efficiency, we do not delegate to -# those functions but instead duplicate the functionality here. -func_dirname_and_basename () -{ - # Extract subdirectory from the argument. - func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"` - if test "X$func_dirname_result" = "X${1}"; then - func_dirname_result="${3}" - else - func_dirname_result="$func_dirname_result${2}" - fi - func_basename_result=`$ECHO "${1}" | $SED -e "$basename"` -} # func_dirname_and_basename may be replaced by extended shell implementation - - -# func_stripname prefix suffix name -# strip PREFIX and SUFFIX off of NAME. -# PREFIX and SUFFIX must not contain globbing or regex special -# characters, hashes, percent signs, but SUFFIX may contain a leading -# dot (in which case that matches only a dot). -# func_strip_suffix prefix name -func_stripname () -{ - case ${2} in - .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; - *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; - esac -} # func_stripname may be replaced by extended shell implementation - - -# These SED scripts presuppose an absolute path with a trailing slash. -pathcar='s,^/\([^/]*\).*$,\1,' -pathcdr='s,^/[^/]*,,' -removedotparts=':dotsl - s@/\./@/@g - t dotsl - s,/\.$,/,' -collapseslashes='s@/\{1,\}@/@g' -finalslash='s,/*$,/,' - -# func_normal_abspath PATH -# Remove doubled-up and trailing slashes, "." path components, -# and cancel out any ".." path components in PATH after making -# it an absolute path. -# value returned in "$func_normal_abspath_result" -func_normal_abspath () -{ - # Start from root dir and reassemble the path. - func_normal_abspath_result= - func_normal_abspath_tpath=$1 - func_normal_abspath_altnamespace= - case $func_normal_abspath_tpath in - "") - # Empty path, that just means $cwd. - func_stripname '' '/' "`pwd`" - func_normal_abspath_result=$func_stripname_result - return - ;; - # The next three entries are used to spot a run of precisely - # two leading slashes without using negated character classes; - # we take advantage of case's first-match behaviour. - ///*) - # Unusual form of absolute path, do nothing. - ;; - //*) - # Not necessarily an ordinary path; POSIX reserves leading '//' - # and for example Cygwin uses it to access remote file shares - # over CIFS/SMB, so we conserve a leading double slash if found. - func_normal_abspath_altnamespace=/ - ;; - /*) - # Absolute path, do nothing. - ;; - *) - # Relative path, prepend $cwd. - func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath - ;; - esac - # Cancel out all the simple stuff to save iterations. We also want - # the path to end with a slash for ease of parsing, so make sure - # there is one (and only one) here. - func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ - -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"` - while :; do - # Processed it all yet? - if test "$func_normal_abspath_tpath" = / ; then - # If we ascended to the root using ".." the result may be empty now. - if test -z "$func_normal_abspath_result" ; then - func_normal_abspath_result=/ - fi - break - fi - func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \ - -e "$pathcar"` - func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ - -e "$pathcdr"` - # Figure out what to do with it - case $func_normal_abspath_tcomponent in - "") - # Trailing empty path component, ignore it. - ;; - ..) - # Parent dir; strip last assembled component from result. - func_dirname "$func_normal_abspath_result" - func_normal_abspath_result=$func_dirname_result - ;; - *) - # Actual path component, append it. - func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent - ;; - esac - done - # Restore leading double-slash if one was found on entry. - func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result -} - -# func_relative_path SRCDIR DSTDIR -# generates a relative path from SRCDIR to DSTDIR, with a trailing -# slash if non-empty, suitable for immediately appending a filename -# without needing to append a separator. -# value returned in "$func_relative_path_result" -func_relative_path () -{ - func_relative_path_result= - func_normal_abspath "$1" - func_relative_path_tlibdir=$func_normal_abspath_result - func_normal_abspath "$2" - func_relative_path_tbindir=$func_normal_abspath_result - - # Ascend the tree starting from libdir - while :; do - # check if we have found a prefix of bindir - case $func_relative_path_tbindir in - $func_relative_path_tlibdir) - # found an exact match - func_relative_path_tcancelled= - break - ;; - $func_relative_path_tlibdir*) - # found a matching prefix - func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir" - func_relative_path_tcancelled=$func_stripname_result - if test -z "$func_relative_path_result"; then - func_relative_path_result=. - fi - break - ;; - *) - func_dirname $func_relative_path_tlibdir - func_relative_path_tlibdir=${func_dirname_result} - if test "x$func_relative_path_tlibdir" = x ; then - # Have to descend all the way to the root! - func_relative_path_result=../$func_relative_path_result - func_relative_path_tcancelled=$func_relative_path_tbindir - break - fi - func_relative_path_result=../$func_relative_path_result - ;; - esac - done - - # Now calculate path; take care to avoid doubling-up slashes. - func_stripname '' '/' "$func_relative_path_result" - func_relative_path_result=$func_stripname_result - func_stripname '/' '/' "$func_relative_path_tcancelled" - if test "x$func_stripname_result" != x ; then - func_relative_path_result=${func_relative_path_result}/${func_stripname_result} - fi - - # Normalisation. If bindir is libdir, return empty string, - # else relative path ending with a slash; either way, target - # file name can be directly appended. - if test ! -z "$func_relative_path_result"; then - func_stripname './' '' "$func_relative_path_result/" - func_relative_path_result=$func_stripname_result - fi -} - -# The name of this program: -func_dirname_and_basename "$progpath" -progname=$func_basename_result - -# Make sure we have an absolute path for reexecution: -case $progpath in - [\\/]*|[A-Za-z]:\\*) ;; - *[\\/]*) - progdir=$func_dirname_result - progdir=`cd "$progdir" && pwd` - progpath="$progdir/$progname" - ;; - *) - save_IFS="$IFS" - IFS=${PATH_SEPARATOR-:} - for progdir in $PATH; do - IFS="$save_IFS" - test -x "$progdir/$progname" && break - done - IFS="$save_IFS" - test -n "$progdir" || progdir=`pwd` - progpath="$progdir/$progname" - ;; -esac - -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -Xsed="${SED}"' -e 1s/^X//' -sed_quote_subst='s/\([`"$\\]\)/\\\1/g' - -# Same as above, but do not quote variable references. -double_quote_subst='s/\(["`\\]\)/\\\1/g' - -# Sed substitution that turns a string into a regex matching for the -# string literally. -sed_make_literal_regex='s,[].[^$\\*\/],\\&,g' - -# Sed substitution that converts a w32 file name or path -# which contains forward slashes, into one that contains -# (escaped) backslashes. A very naive implementation. -lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' - -# Re-`\' parameter expansions in output of double_quote_subst that were -# `\'-ed in input to the same. If an odd number of `\' preceded a '$' -# in input to double_quote_subst, that '$' was protected from expansion. -# Since each input `\' is now two `\'s, look for any number of runs of -# four `\'s followed by two `\'s and then a '$'. `\' that '$'. -bs='\\' -bs2='\\\\' -bs4='\\\\\\\\' -dollar='\$' -sed_double_backslash="\ - s/$bs4/&\\ -/g - s/^$bs2$dollar/$bs&/ - s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g - s/\n//g" - -# Standard options: -opt_dry_run=false -opt_help=false -opt_quiet=false -opt_verbose=false -opt_warning=: - -# func_echo arg... -# Echo program name prefixed message, along with the current mode -# name if it has been set yet. -func_echo () -{ - $ECHO "$progname: ${opt_mode+$opt_mode: }$*" -} - -# func_verbose arg... -# Echo program name prefixed message in verbose mode only. -func_verbose () -{ - $opt_verbose && func_echo ${1+"$@"} - - # A bug in bash halts the script if the last line of a function - # fails when set -e is in force, so we need another command to - # work around that: - : -} - -# func_echo_all arg... -# Invoke $ECHO with all args, space-separated. -func_echo_all () -{ - $ECHO "$*" -} - -# func_error arg... -# Echo program name prefixed message to standard error. -func_error () -{ - $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2 -} - -# func_warning arg... -# Echo program name prefixed warning message to standard error. -func_warning () -{ - $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2 - - # bash bug again: - : -} - -# func_fatal_error arg... -# Echo program name prefixed message to standard error, and exit. -func_fatal_error () -{ - func_error ${1+"$@"} - exit $EXIT_FAILURE -} - -# func_fatal_help arg... -# Echo program name prefixed message to standard error, followed by -# a help hint, and exit. -func_fatal_help () -{ - func_error ${1+"$@"} - func_fatal_error "$help" -} -help="Try \`$progname --help' for more information." ## default - - -# func_grep expression filename -# Check whether EXPRESSION matches any line of FILENAME, without output. -func_grep () -{ - $GREP "$1" "$2" >/dev/null 2>&1 -} - - -# func_mkdir_p directory-path -# Make sure the entire path to DIRECTORY-PATH is available. -func_mkdir_p () -{ - my_directory_path="$1" - my_dir_list= - - if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then - - # Protect directory names starting with `-' - case $my_directory_path in - -*) my_directory_path="./$my_directory_path" ;; - esac - - # While some portion of DIR does not yet exist... - while test ! -d "$my_directory_path"; do - # ...make a list in topmost first order. Use a colon delimited - # list incase some portion of path contains whitespace. - my_dir_list="$my_directory_path:$my_dir_list" - - # If the last portion added has no slash in it, the list is done - case $my_directory_path in */*) ;; *) break ;; esac - - # ...otherwise throw away the child directory and loop - my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"` - done - my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'` - - save_mkdir_p_IFS="$IFS"; IFS=':' - for my_dir in $my_dir_list; do - IFS="$save_mkdir_p_IFS" - # mkdir can fail with a `File exist' error if two processes - # try to create one of the directories concurrently. Don't - # stop in that case! - $MKDIR "$my_dir" 2>/dev/null || : - done - IFS="$save_mkdir_p_IFS" - - # Bail out if we (or some other process) failed to create a directory. - test -d "$my_directory_path" || \ - func_fatal_error "Failed to create \`$1'" - fi -} - - -# func_mktempdir [string] -# Make a temporary directory that won't clash with other running -# libtool processes, and avoids race conditions if possible. If -# given, STRING is the basename for that directory. -func_mktempdir () -{ - my_template="${TMPDIR-/tmp}/${1-$progname}" - - if test "$opt_dry_run" = ":"; then - # Return a directory name, but don't create it in dry-run mode - my_tmpdir="${my_template}-$$" - else - - # If mktemp works, use that first and foremost - my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null` - - if test ! -d "$my_tmpdir"; then - # Failing that, at least try and use $RANDOM to avoid a race - my_tmpdir="${my_template}-${RANDOM-0}$$" - - save_mktempdir_umask=`umask` - umask 0077 - $MKDIR "$my_tmpdir" - umask $save_mktempdir_umask - fi - - # If we're not in dry-run mode, bomb out on failure - test -d "$my_tmpdir" || \ - func_fatal_error "cannot create temporary directory \`$my_tmpdir'" - fi - - $ECHO "$my_tmpdir" -} - - -# func_quote_for_eval arg -# Aesthetically quote ARG to be evaled later. -# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT -# is double-quoted, suitable for a subsequent eval, whereas -# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters -# which are still active within double quotes backslashified. -func_quote_for_eval () -{ - case $1 in - *[\\\`\"\$]*) - func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;; - *) - func_quote_for_eval_unquoted_result="$1" ;; - esac - - case $func_quote_for_eval_unquoted_result in - # Double-quote args containing shell metacharacters to delay - # word splitting, command substitution and and variable - # expansion for a subsequent eval. - # Many Bourne shells cannot handle close brackets correctly - # in scan sets, so we specify it separately. - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\"" - ;; - *) - func_quote_for_eval_result="$func_quote_for_eval_unquoted_result" - esac -} - - -# func_quote_for_expand arg -# Aesthetically quote ARG to be evaled later; same as above, -# but do not quote variable references. -func_quote_for_expand () -{ - case $1 in - *[\\\`\"]*) - my_arg=`$ECHO "$1" | $SED \ - -e "$double_quote_subst" -e "$sed_double_backslash"` ;; - *) - my_arg="$1" ;; - esac - - case $my_arg in - # Double-quote args containing shell metacharacters to delay - # word splitting and command substitution for a subsequent eval. - # Many Bourne shells cannot handle close brackets correctly - # in scan sets, so we specify it separately. - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - my_arg="\"$my_arg\"" - ;; - esac - - func_quote_for_expand_result="$my_arg" -} - - -# func_show_eval cmd [fail_exp] -# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is -# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP -# is given, then evaluate it. -func_show_eval () -{ - my_cmd="$1" - my_fail_exp="${2-:}" - - ${opt_silent-false} || { - func_quote_for_expand "$my_cmd" - eval "func_echo $func_quote_for_expand_result" - } - - if ${opt_dry_run-false}; then :; else - eval "$my_cmd" - my_status=$? - if test "$my_status" -eq 0; then :; else - eval "(exit $my_status); $my_fail_exp" - fi - fi -} - - -# func_show_eval_locale cmd [fail_exp] -# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is -# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP -# is given, then evaluate it. Use the saved locale for evaluation. -func_show_eval_locale () -{ - my_cmd="$1" - my_fail_exp="${2-:}" - - ${opt_silent-false} || { - func_quote_for_expand "$my_cmd" - eval "func_echo $func_quote_for_expand_result" - } - - if ${opt_dry_run-false}; then :; else - eval "$lt_user_locale - $my_cmd" - my_status=$? - eval "$lt_safe_locale" - if test "$my_status" -eq 0; then :; else - eval "(exit $my_status); $my_fail_exp" - fi - fi -} - -# func_tr_sh -# Turn $1 into a string suitable for a shell variable name. -# Result is stored in $func_tr_sh_result. All characters -# not in the set a-zA-Z0-9_ are replaced with '_'. Further, -# if $1 begins with a digit, a '_' is prepended as well. -func_tr_sh () -{ - case $1 in - [0-9]* | *[!a-zA-Z0-9_]*) - func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'` - ;; - * ) - func_tr_sh_result=$1 - ;; - esac -} - - -# func_version -# Echo version message to standard output and exit. -func_version () -{ - $opt_debug - - $SED -n '/(C)/!b go - :more - /\./!{ - N - s/\n# / / - b more - } - :go - /^# '$PROGRAM' (GNU /,/# warranty; / { - s/^# // - s/^# *$// - s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/ - p - }' < "$progpath" - exit $? -} - -# func_usage -# Echo short help message to standard output and exit. -func_usage () -{ - $opt_debug - - $SED -n '/^# Usage:/,/^# *.*--help/ { - s/^# // - s/^# *$// - s/\$progname/'$progname'/ - p - }' < "$progpath" - echo - $ECHO "run \`$progname --help | more' for full usage" - exit $? -} - -# func_help [NOEXIT] -# Echo long help message to standard output and exit, -# unless 'noexit' is passed as argument. -func_help () -{ - $opt_debug - - $SED -n '/^# Usage:/,/# Report bugs to/ { - :print - s/^# // - s/^# *$// - s*\$progname*'$progname'* - s*\$host*'"$host"'* - s*\$SHELL*'"$SHELL"'* - s*\$LTCC*'"$LTCC"'* - s*\$LTCFLAGS*'"$LTCFLAGS"'* - s*\$LD*'"$LD"'* - s/\$with_gnu_ld/'"$with_gnu_ld"'/ - s/\$automake_version/'"`(${AUTOMAKE-automake} --version) 2>/dev/null |$SED 1q`"'/ - s/\$autoconf_version/'"`(${AUTOCONF-autoconf} --version) 2>/dev/null |$SED 1q`"'/ - p - d - } - /^# .* home page:/b print - /^# General help using/b print - ' < "$progpath" - ret=$? - if test -z "$1"; then - exit $ret - fi -} - -# func_missing_arg argname -# Echo program name prefixed message to standard error and set global -# exit_cmd. -func_missing_arg () -{ - $opt_debug - - func_error "missing argument for $1." - exit_cmd=exit -} - - -# func_split_short_opt shortopt -# Set func_split_short_opt_name and func_split_short_opt_arg shell -# variables after splitting SHORTOPT after the 2nd character. -func_split_short_opt () -{ - my_sed_short_opt='1s/^\(..\).*$/\1/;q' - my_sed_short_rest='1s/^..\(.*\)$/\1/;q' - - func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"` - func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"` -} # func_split_short_opt may be replaced by extended shell implementation - - -# func_split_long_opt longopt -# Set func_split_long_opt_name and func_split_long_opt_arg shell -# variables after splitting LONGOPT at the `=' sign. -func_split_long_opt () -{ - my_sed_long_opt='1s/^\(--[^=]*\)=.*/\1/;q' - my_sed_long_arg='1s/^--[^=]*=//' - - func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"` - func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"` -} # func_split_long_opt may be replaced by extended shell implementation - -exit_cmd=: - - - - - -magic="%%%MAGIC variable%%%" -magic_exe="%%%MAGIC EXE variable%%%" - -# Global variables. -nonopt= -preserve_args= -lo2o="s/\\.lo\$/.${objext}/" -o2lo="s/\\.${objext}\$/.lo/" -extracted_archives= -extracted_serial=0 - -# If this variable is set in any of the actions, the command in it -# will be execed at the end. This prevents here-documents from being -# left over by shells. -exec_cmd= - -# func_append var value -# Append VALUE to the end of shell variable VAR. -func_append () -{ - eval "${1}=\$${1}\${2}" -} # func_append may be replaced by extended shell implementation - -# func_append_quoted var value -# Quote VALUE and append to the end of shell variable VAR, separated -# by a space. -func_append_quoted () -{ - func_quote_for_eval "${2}" - eval "${1}=\$${1}\\ \$func_quote_for_eval_result" -} # func_append_quoted may be replaced by extended shell implementation - - -# func_arith arithmetic-term... -func_arith () -{ - func_arith_result=`expr "${@}"` -} # func_arith may be replaced by extended shell implementation - - -# func_len string -# STRING may not start with a hyphen. -func_len () -{ - func_len_result=`expr "${1}" : ".*" 2>/dev/null || echo $max_cmd_len` -} # func_len may be replaced by extended shell implementation - - -# func_lo2o object -func_lo2o () -{ - func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"` -} # func_lo2o may be replaced by extended shell implementation - - -# func_xform libobj-or-source -func_xform () -{ - func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'` -} # func_xform may be replaced by extended shell implementation - - -# func_fatal_configuration arg... -# Echo program name prefixed message to standard error, followed by -# a configuration failure hint, and exit. -func_fatal_configuration () -{ - func_error ${1+"$@"} - func_error "See the $PACKAGE documentation for more information." - func_fatal_error "Fatal configuration error." -} - - -# func_config -# Display the configuration for all the tags in this script. -func_config () -{ - re_begincf='^# ### BEGIN LIBTOOL' - re_endcf='^# ### END LIBTOOL' - - # Default configuration. - $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath" - - # Now print the configurations for the tags. - for tagname in $taglist; do - $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath" - done - - exit $? -} - -# func_features -# Display the features supported by this script. -func_features () -{ - echo "host: $host" - if test "$build_libtool_libs" = yes; then - echo "enable shared libraries" - else - echo "disable shared libraries" - fi - if test "$build_old_libs" = yes; then - echo "enable static libraries" - else - echo "disable static libraries" - fi - - exit $? -} - -# func_enable_tag tagname -# Verify that TAGNAME is valid, and either flag an error and exit, or -# enable the TAGNAME tag. We also add TAGNAME to the global $taglist -# variable here. -func_enable_tag () -{ - # Global variable: - tagname="$1" - - re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$" - re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$" - sed_extractcf="/$re_begincf/,/$re_endcf/p" - - # Validate tagname. - case $tagname in - *[!-_A-Za-z0-9,/]*) - func_fatal_error "invalid tag name: $tagname" - ;; - esac - - # Don't test for the "default" C tag, as we know it's - # there but not specially marked. - case $tagname in - CC) ;; - *) - if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then - taglist="$taglist $tagname" - - # Evaluate the configuration. Be careful to quote the path - # and the sed script, to avoid splitting on whitespace, but - # also don't use non-portable quotes within backquotes within - # quotes we have to do it in 2 steps: - extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"` - eval "$extractedcf" - else - func_error "ignoring unknown tag $tagname" - fi - ;; - esac -} - -# func_check_version_match -# Ensure that we are using m4 macros, and libtool script from the same -# release of libtool. -func_check_version_match () -{ - if test "$package_revision" != "$macro_revision"; then - if test "$VERSION" != "$macro_version"; then - if test -z "$macro_version"; then - cat >&2 <<_LT_EOF -$progname: Version mismatch error. This is $PACKAGE $VERSION, but the -$progname: definition of this LT_INIT comes from an older release. -$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION -$progname: and run autoconf again. -_LT_EOF - else - cat >&2 <<_LT_EOF -$progname: Version mismatch error. This is $PACKAGE $VERSION, but the -$progname: definition of this LT_INIT comes from $PACKAGE $macro_version. -$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION -$progname: and run autoconf again. -_LT_EOF - fi - else - cat >&2 <<_LT_EOF -$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision, -$progname: but the definition of this LT_INIT comes from revision $macro_revision. -$progname: You should recreate aclocal.m4 with macros from revision $package_revision -$progname: of $PACKAGE $VERSION and run autoconf again. -_LT_EOF - fi - - exit $EXIT_MISMATCH - fi -} - - -# Shorthand for --mode=foo, only valid as the first argument -case $1 in -clean|clea|cle|cl) - shift; set dummy --mode clean ${1+"$@"}; shift - ;; -compile|compil|compi|comp|com|co|c) - shift; set dummy --mode compile ${1+"$@"}; shift - ;; -execute|execut|execu|exec|exe|ex|e) - shift; set dummy --mode execute ${1+"$@"}; shift - ;; -finish|finis|fini|fin|fi|f) - shift; set dummy --mode finish ${1+"$@"}; shift - ;; -install|instal|insta|inst|ins|in|i) - shift; set dummy --mode install ${1+"$@"}; shift - ;; -link|lin|li|l) - shift; set dummy --mode link ${1+"$@"}; shift - ;; -uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u) - shift; set dummy --mode uninstall ${1+"$@"}; shift - ;; -esac - - - -# Option defaults: -opt_debug=: -opt_dry_run=false -opt_config=false -opt_preserve_dup_deps=false -opt_features=false -opt_finish=false -opt_help=false -opt_help_all=false -opt_silent=: -opt_warning=: -opt_verbose=: -opt_silent=false -opt_verbose=false - - -# Parse options once, thoroughly. This comes as soon as possible in the -# script to make things like `--version' happen as quickly as we can. -{ - # this just eases exit handling - while test $# -gt 0; do - opt="$1" - shift - case $opt in - --debug|-x) opt_debug='set -x' - func_echo "enabling shell trace mode" - $opt_debug - ;; - --dry-run|--dryrun|-n) - opt_dry_run=: - ;; - --config) - opt_config=: -func_config - ;; - --dlopen|-dlopen) - optarg="$1" - opt_dlopen="${opt_dlopen+$opt_dlopen -}$optarg" - shift - ;; - --preserve-dup-deps) - opt_preserve_dup_deps=: - ;; - --features) - opt_features=: -func_features - ;; - --finish) - opt_finish=: -set dummy --mode finish ${1+"$@"}; shift - ;; - --help) - opt_help=: - ;; - --help-all) - opt_help_all=: -opt_help=': help-all' - ;; - --mode) - test $# = 0 && func_missing_arg $opt && break - optarg="$1" - opt_mode="$optarg" -case $optarg in - # Valid mode arguments: - clean|compile|execute|finish|install|link|relink|uninstall) ;; - - # Catch anything else as an error - *) func_error "invalid argument for $opt" - exit_cmd=exit - break - ;; -esac - shift - ;; - --no-silent|--no-quiet) - opt_silent=false -func_append preserve_args " $opt" - ;; - --no-warning|--no-warn) - opt_warning=false -func_append preserve_args " $opt" - ;; - --no-verbose) - opt_verbose=false -func_append preserve_args " $opt" - ;; - --silent|--quiet) - opt_silent=: -func_append preserve_args " $opt" - opt_verbose=false - ;; - --verbose|-v) - opt_verbose=: -func_append preserve_args " $opt" -opt_silent=false - ;; - --tag) - test $# = 0 && func_missing_arg $opt && break - optarg="$1" - opt_tag="$optarg" -func_append preserve_args " $opt $optarg" -func_enable_tag "$optarg" - shift - ;; - - -\?|-h) func_usage ;; - --help) func_help ;; - --version) func_version ;; - - # Separate optargs to long options: - --*=*) - func_split_long_opt "$opt" - set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"} - shift - ;; - - # Separate non-argument short options: - -\?*|-h*|-n*|-v*) - func_split_short_opt "$opt" - set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"} - shift - ;; - - --) break ;; - -*) func_fatal_help "unrecognized option \`$opt'" ;; - *) set dummy "$opt" ${1+"$@"}; shift; break ;; - esac - done - - # Validate options: - - # save first non-option argument - if test "$#" -gt 0; then - nonopt="$opt" - shift - fi - - # preserve --debug - test "$opt_debug" = : || func_append preserve_args " --debug" - - case $host in - *cygwin* | *mingw* | *pw32* | *cegcc*) - # don't eliminate duplications in $postdeps and $predeps - opt_duplicate_compiler_generated_deps=: - ;; - *) - opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps - ;; - esac - - $opt_help || { - # Sanity checks first: - func_check_version_match - - if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then - func_fatal_configuration "not configured to build any kind of library" - fi - - # Darwin sucks - eval std_shrext=\"$shrext_cmds\" - - # Only execute mode is allowed to have -dlopen flags. - if test -n "$opt_dlopen" && test "$opt_mode" != execute; then - func_error "unrecognized option \`-dlopen'" - $ECHO "$help" 1>&2 - exit $EXIT_FAILURE - fi - - # Change the help message to a mode-specific one. - generic_help="$help" - help="Try \`$progname --help --mode=$opt_mode' for more information." - } - - - # Bail if the options were screwed - $exit_cmd $EXIT_FAILURE -} - - - - -## ----------- ## -## Main. ## -## ----------- ## - -# func_lalib_p file -# True iff FILE is a libtool `.la' library or `.lo' object file. -# This function is only a basic sanity check; it will hardly flush out -# determined imposters. -func_lalib_p () -{ - test -f "$1" && - $SED -e 4q "$1" 2>/dev/null \ - | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1 -} - -# func_lalib_unsafe_p file -# True iff FILE is a libtool `.la' library or `.lo' object file. -# This function implements the same check as func_lalib_p without -# resorting to external programs. To this end, it redirects stdin and -# closes it afterwards, without saving the original file descriptor. -# As a safety measure, use it only where a negative result would be -# fatal anyway. Works if `file' does not exist. -func_lalib_unsafe_p () -{ - lalib_p=no - if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then - for lalib_p_l in 1 2 3 4 - do - read lalib_p_line - case "$lalib_p_line" in - \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;; - esac - done - exec 0<&5 5<&- - fi - test "$lalib_p" = yes -} - -# func_ltwrapper_script_p file -# True iff FILE is a libtool wrapper script -# This function is only a basic sanity check; it will hardly flush out -# determined imposters. -func_ltwrapper_script_p () -{ - func_lalib_p "$1" -} - -# func_ltwrapper_executable_p file -# True iff FILE is a libtool wrapper executable -# This function is only a basic sanity check; it will hardly flush out -# determined imposters. -func_ltwrapper_executable_p () -{ - func_ltwrapper_exec_suffix= - case $1 in - *.exe) ;; - *) func_ltwrapper_exec_suffix=.exe ;; - esac - $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1 -} - -# func_ltwrapper_scriptname file -# Assumes file is an ltwrapper_executable -# uses $file to determine the appropriate filename for a -# temporary ltwrapper_script. -func_ltwrapper_scriptname () -{ - func_dirname_and_basename "$1" "" "." - func_stripname '' '.exe' "$func_basename_result" - func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper" -} - -# func_ltwrapper_p file -# True iff FILE is a libtool wrapper script or wrapper executable -# This function is only a basic sanity check; it will hardly flush out -# determined imposters. -func_ltwrapper_p () -{ - func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1" -} - - -# func_execute_cmds commands fail_cmd -# Execute tilde-delimited COMMANDS. -# If FAIL_CMD is given, eval that upon failure. -# FAIL_CMD may read-access the current command in variable CMD! -func_execute_cmds () -{ - $opt_debug - save_ifs=$IFS; IFS='~' - for cmd in $1; do - IFS=$save_ifs - eval cmd=\"$cmd\" - func_show_eval "$cmd" "${2-:}" - done - IFS=$save_ifs -} - - -# func_source file -# Source FILE, adding directory component if necessary. -# Note that it is not necessary on cygwin/mingw to append a dot to -# FILE even if both FILE and FILE.exe exist: automatic-append-.exe -# behavior happens only for exec(3), not for open(2)! Also, sourcing -# `FILE.' does not work on cygwin managed mounts. -func_source () -{ - $opt_debug - case $1 in - */* | *\\*) . "$1" ;; - *) . "./$1" ;; - esac -} - - -# func_resolve_sysroot PATH -# Replace a leading = in PATH with a sysroot. Store the result into -# func_resolve_sysroot_result -func_resolve_sysroot () -{ - func_resolve_sysroot_result=$1 - case $func_resolve_sysroot_result in - =*) - func_stripname '=' '' "$func_resolve_sysroot_result" - func_resolve_sysroot_result=$lt_sysroot$func_stripname_result - ;; - esac -} - -# func_replace_sysroot PATH -# If PATH begins with the sysroot, replace it with = and -# store the result into func_replace_sysroot_result. -func_replace_sysroot () -{ - case "$lt_sysroot:$1" in - ?*:"$lt_sysroot"*) - func_stripname "$lt_sysroot" '' "$1" - func_replace_sysroot_result="=$func_stripname_result" - ;; - *) - # Including no sysroot. - func_replace_sysroot_result=$1 - ;; - esac -} - -# func_infer_tag arg -# Infer tagged configuration to use if any are available and -# if one wasn't chosen via the "--tag" command line option. -# Only attempt this if the compiler in the base compile -# command doesn't match the default compiler. -# arg is usually of the form 'gcc ...' -func_infer_tag () -{ - $opt_debug - if test -n "$available_tags" && test -z "$tagname"; then - CC_quoted= - for arg in $CC; do - func_append_quoted CC_quoted "$arg" - done - CC_expanded=`func_echo_all $CC` - CC_quoted_expanded=`func_echo_all $CC_quoted` - case $@ in - # Blanks in the command may have been stripped by the calling shell, - # but not from the CC environment variable when configure was run. - " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \ - " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;; - # Blanks at the start of $base_compile will cause this to fail - # if we don't check for them as well. - *) - for z in $available_tags; do - if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then - # Evaluate the configuration. - eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" - CC_quoted= - for arg in $CC; do - # Double-quote args containing other shell metacharacters. - func_append_quoted CC_quoted "$arg" - done - CC_expanded=`func_echo_all $CC` - CC_quoted_expanded=`func_echo_all $CC_quoted` - case "$@ " in - " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \ - " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) - # The compiler in the base compile command matches - # the one in the tagged configuration. - # Assume this is the tagged configuration we want. - tagname=$z - break - ;; - esac - fi - done - # If $tagname still isn't set, then no tagged configuration - # was found and let the user know that the "--tag" command - # line option must be used. - if test -z "$tagname"; then - func_echo "unable to infer tagged configuration" - func_fatal_error "specify a tag with \`--tag'" -# else -# func_verbose "using $tagname tagged configuration" - fi - ;; - esac - fi -} - - - -# func_write_libtool_object output_name pic_name nonpic_name -# Create a libtool object file (analogous to a ".la" file), -# but don't create it if we're doing a dry run. -func_write_libtool_object () -{ - write_libobj=${1} - if test "$build_libtool_libs" = yes; then - write_lobj=\'${2}\' - else - write_lobj=none - fi - - if test "$build_old_libs" = yes; then - write_oldobj=\'${3}\' - else - write_oldobj=none - fi - - $opt_dry_run || { - cat >${write_libobj}T </dev/null` - if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then - func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" | - $SED -e "$lt_sed_naive_backslashify"` - else - func_convert_core_file_wine_to_w32_result= - fi - fi -} -# end: func_convert_core_file_wine_to_w32 - - -# func_convert_core_path_wine_to_w32 ARG -# Helper function used by path conversion functions when $build is *nix, and -# $host is mingw, cygwin, or some other w32 environment. Relies on a correctly -# configured wine environment available, with the winepath program in $build's -# $PATH. Assumes ARG has no leading or trailing path separator characters. -# -# ARG is path to be converted from $build format to win32. -# Result is available in $func_convert_core_path_wine_to_w32_result. -# Unconvertible file (directory) names in ARG are skipped; if no directory names -# are convertible, then the result may be empty. -func_convert_core_path_wine_to_w32 () -{ - $opt_debug - # unfortunately, winepath doesn't convert paths, only file names - func_convert_core_path_wine_to_w32_result="" - if test -n "$1"; then - oldIFS=$IFS - IFS=: - for func_convert_core_path_wine_to_w32_f in $1; do - IFS=$oldIFS - func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f" - if test -n "$func_convert_core_file_wine_to_w32_result" ; then - if test -z "$func_convert_core_path_wine_to_w32_result"; then - func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result" - else - func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result" - fi - fi - done - IFS=$oldIFS - fi -} -# end: func_convert_core_path_wine_to_w32 - - -# func_cygpath ARGS... -# Wrapper around calling the cygpath program via LT_CYGPATH. This is used when -# when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2) -# $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or -# (2), returns the Cygwin file name or path in func_cygpath_result (input -# file name or path is assumed to be in w32 format, as previously converted -# from $build's *nix or MSYS format). In case (3), returns the w32 file name -# or path in func_cygpath_result (input file name or path is assumed to be in -# Cygwin format). Returns an empty string on error. -# -# ARGS are passed to cygpath, with the last one being the file name or path to -# be converted. -# -# Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH -# environment variable; do not put it in $PATH. -func_cygpath () -{ - $opt_debug - if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then - func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null` - if test "$?" -ne 0; then - # on failure, ensure result is empty - func_cygpath_result= - fi - else - func_cygpath_result= - func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'" - fi -} -#end: func_cygpath - - -# func_convert_core_msys_to_w32 ARG -# Convert file name or path ARG from MSYS format to w32 format. Return -# result in func_convert_core_msys_to_w32_result. -func_convert_core_msys_to_w32 () -{ - $opt_debug - # awkward: cmd appends spaces to result - func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null | - $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"` -} -#end: func_convert_core_msys_to_w32 - - -# func_convert_file_check ARG1 ARG2 -# Verify that ARG1 (a file name in $build format) was converted to $host -# format in ARG2. Otherwise, emit an error message, but continue (resetting -# func_to_host_file_result to ARG1). -func_convert_file_check () -{ - $opt_debug - if test -z "$2" && test -n "$1" ; then - func_error "Could not determine host file name corresponding to" - func_error " \`$1'" - func_error "Continuing, but uninstalled executables may not work." - # Fallback: - func_to_host_file_result="$1" - fi -} -# end func_convert_file_check - - -# func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH -# Verify that FROM_PATH (a path in $build format) was converted to $host -# format in TO_PATH. Otherwise, emit an error message, but continue, resetting -# func_to_host_file_result to a simplistic fallback value (see below). -func_convert_path_check () -{ - $opt_debug - if test -z "$4" && test -n "$3"; then - func_error "Could not determine the host path corresponding to" - func_error " \`$3'" - func_error "Continuing, but uninstalled executables may not work." - # Fallback. This is a deliberately simplistic "conversion" and - # should not be "improved". See libtool.info. - if test "x$1" != "x$2"; then - lt_replace_pathsep_chars="s|$1|$2|g" - func_to_host_path_result=`echo "$3" | - $SED -e "$lt_replace_pathsep_chars"` - else - func_to_host_path_result="$3" - fi - fi -} -# end func_convert_path_check - - -# func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG -# Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT -# and appending REPL if ORIG matches BACKPAT. -func_convert_path_front_back_pathsep () -{ - $opt_debug - case $4 in - $1 ) func_to_host_path_result="$3$func_to_host_path_result" - ;; - esac - case $4 in - $2 ) func_append func_to_host_path_result "$3" - ;; - esac -} -# end func_convert_path_front_back_pathsep - - -################################################## -# $build to $host FILE NAME CONVERSION FUNCTIONS # -################################################## -# invoked via `$to_host_file_cmd ARG' -# -# In each case, ARG is the path to be converted from $build to $host format. -# Result will be available in $func_to_host_file_result. - - -# func_to_host_file ARG -# Converts the file name ARG from $build format to $host format. Return result -# in func_to_host_file_result. -func_to_host_file () -{ - $opt_debug - $to_host_file_cmd "$1" -} -# end func_to_host_file - - -# func_to_tool_file ARG LAZY -# converts the file name ARG from $build format to toolchain format. Return -# result in func_to_tool_file_result. If the conversion in use is listed -# in (the comma separated) LAZY, no conversion takes place. -func_to_tool_file () -{ - $opt_debug - case ,$2, in - *,"$to_tool_file_cmd",*) - func_to_tool_file_result=$1 - ;; - *) - $to_tool_file_cmd "$1" - func_to_tool_file_result=$func_to_host_file_result - ;; - esac -} -# end func_to_tool_file - - -# func_convert_file_noop ARG -# Copy ARG to func_to_host_file_result. -func_convert_file_noop () -{ - func_to_host_file_result="$1" -} -# end func_convert_file_noop - - -# func_convert_file_msys_to_w32 ARG -# Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic -# conversion to w32 is not available inside the cwrapper. Returns result in -# func_to_host_file_result. -func_convert_file_msys_to_w32 () -{ - $opt_debug - func_to_host_file_result="$1" - if test -n "$1"; then - func_convert_core_msys_to_w32 "$1" - func_to_host_file_result="$func_convert_core_msys_to_w32_result" - fi - func_convert_file_check "$1" "$func_to_host_file_result" -} -# end func_convert_file_msys_to_w32 - - -# func_convert_file_cygwin_to_w32 ARG -# Convert file name ARG from Cygwin to w32 format. Returns result in -# func_to_host_file_result. -func_convert_file_cygwin_to_w32 () -{ - $opt_debug - func_to_host_file_result="$1" - if test -n "$1"; then - # because $build is cygwin, we call "the" cygpath in $PATH; no need to use - # LT_CYGPATH in this case. - func_to_host_file_result=`cygpath -m "$1"` - fi - func_convert_file_check "$1" "$func_to_host_file_result" -} -# end func_convert_file_cygwin_to_w32 - - -# func_convert_file_nix_to_w32 ARG -# Convert file name ARG from *nix to w32 format. Requires a wine environment -# and a working winepath. Returns result in func_to_host_file_result. -func_convert_file_nix_to_w32 () -{ - $opt_debug - func_to_host_file_result="$1" - if test -n "$1"; then - func_convert_core_file_wine_to_w32 "$1" - func_to_host_file_result="$func_convert_core_file_wine_to_w32_result" - fi - func_convert_file_check "$1" "$func_to_host_file_result" -} -# end func_convert_file_nix_to_w32 - - -# func_convert_file_msys_to_cygwin ARG -# Convert file name ARG from MSYS to Cygwin format. Requires LT_CYGPATH set. -# Returns result in func_to_host_file_result. -func_convert_file_msys_to_cygwin () -{ - $opt_debug - func_to_host_file_result="$1" - if test -n "$1"; then - func_convert_core_msys_to_w32 "$1" - func_cygpath -u "$func_convert_core_msys_to_w32_result" - func_to_host_file_result="$func_cygpath_result" - fi - func_convert_file_check "$1" "$func_to_host_file_result" -} -# end func_convert_file_msys_to_cygwin - - -# func_convert_file_nix_to_cygwin ARG -# Convert file name ARG from *nix to Cygwin format. Requires Cygwin installed -# in a wine environment, working winepath, and LT_CYGPATH set. Returns result -# in func_to_host_file_result. -func_convert_file_nix_to_cygwin () -{ - $opt_debug - func_to_host_file_result="$1" - if test -n "$1"; then - # convert from *nix to w32, then use cygpath to convert from w32 to cygwin. - func_convert_core_file_wine_to_w32 "$1" - func_cygpath -u "$func_convert_core_file_wine_to_w32_result" - func_to_host_file_result="$func_cygpath_result" - fi - func_convert_file_check "$1" "$func_to_host_file_result" -} -# end func_convert_file_nix_to_cygwin - - -############################################# -# $build to $host PATH CONVERSION FUNCTIONS # -############################################# -# invoked via `$to_host_path_cmd ARG' -# -# In each case, ARG is the path to be converted from $build to $host format. -# The result will be available in $func_to_host_path_result. -# -# Path separators are also converted from $build format to $host format. If -# ARG begins or ends with a path separator character, it is preserved (but -# converted to $host format) on output. -# -# All path conversion functions are named using the following convention: -# file name conversion function : func_convert_file_X_to_Y () -# path conversion function : func_convert_path_X_to_Y () -# where, for any given $build/$host combination the 'X_to_Y' value is the -# same. If conversion functions are added for new $build/$host combinations, -# the two new functions must follow this pattern, or func_init_to_host_path_cmd -# will break. - - -# func_init_to_host_path_cmd -# Ensures that function "pointer" variable $to_host_path_cmd is set to the -# appropriate value, based on the value of $to_host_file_cmd. -to_host_path_cmd= -func_init_to_host_path_cmd () -{ - $opt_debug - if test -z "$to_host_path_cmd"; then - func_stripname 'func_convert_file_' '' "$to_host_file_cmd" - to_host_path_cmd="func_convert_path_${func_stripname_result}" - fi -} - - -# func_to_host_path ARG -# Converts the path ARG from $build format to $host format. Return result -# in func_to_host_path_result. -func_to_host_path () -{ - $opt_debug - func_init_to_host_path_cmd - $to_host_path_cmd "$1" -} -# end func_to_host_path - - -# func_convert_path_noop ARG -# Copy ARG to func_to_host_path_result. -func_convert_path_noop () -{ - func_to_host_path_result="$1" -} -# end func_convert_path_noop - - -# func_convert_path_msys_to_w32 ARG -# Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic -# conversion to w32 is not available inside the cwrapper. Returns result in -# func_to_host_path_result. -func_convert_path_msys_to_w32 () -{ - $opt_debug - func_to_host_path_result="$1" - if test -n "$1"; then - # Remove leading and trailing path separator characters from ARG. MSYS - # behavior is inconsistent here; cygpath turns them into '.;' and ';.'; - # and winepath ignores them completely. - func_stripname : : "$1" - func_to_host_path_tmp1=$func_stripname_result - func_convert_core_msys_to_w32 "$func_to_host_path_tmp1" - func_to_host_path_result="$func_convert_core_msys_to_w32_result" - func_convert_path_check : ";" \ - "$func_to_host_path_tmp1" "$func_to_host_path_result" - func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" - fi -} -# end func_convert_path_msys_to_w32 - - -# func_convert_path_cygwin_to_w32 ARG -# Convert path ARG from Cygwin to w32 format. Returns result in -# func_to_host_file_result. -func_convert_path_cygwin_to_w32 () -{ - $opt_debug - func_to_host_path_result="$1" - if test -n "$1"; then - # See func_convert_path_msys_to_w32: - func_stripname : : "$1" - func_to_host_path_tmp1=$func_stripname_result - func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"` - func_convert_path_check : ";" \ - "$func_to_host_path_tmp1" "$func_to_host_path_result" - func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" - fi -} -# end func_convert_path_cygwin_to_w32 - - -# func_convert_path_nix_to_w32 ARG -# Convert path ARG from *nix to w32 format. Requires a wine environment and -# a working winepath. Returns result in func_to_host_file_result. -func_convert_path_nix_to_w32 () -{ - $opt_debug - func_to_host_path_result="$1" - if test -n "$1"; then - # See func_convert_path_msys_to_w32: - func_stripname : : "$1" - func_to_host_path_tmp1=$func_stripname_result - func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1" - func_to_host_path_result="$func_convert_core_path_wine_to_w32_result" - func_convert_path_check : ";" \ - "$func_to_host_path_tmp1" "$func_to_host_path_result" - func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" - fi -} -# end func_convert_path_nix_to_w32 - - -# func_convert_path_msys_to_cygwin ARG -# Convert path ARG from MSYS to Cygwin format. Requires LT_CYGPATH set. -# Returns result in func_to_host_file_result. -func_convert_path_msys_to_cygwin () -{ - $opt_debug - func_to_host_path_result="$1" - if test -n "$1"; then - # See func_convert_path_msys_to_w32: - func_stripname : : "$1" - func_to_host_path_tmp1=$func_stripname_result - func_convert_core_msys_to_w32 "$func_to_host_path_tmp1" - func_cygpath -u -p "$func_convert_core_msys_to_w32_result" - func_to_host_path_result="$func_cygpath_result" - func_convert_path_check : : \ - "$func_to_host_path_tmp1" "$func_to_host_path_result" - func_convert_path_front_back_pathsep ":*" "*:" : "$1" - fi -} -# end func_convert_path_msys_to_cygwin - - -# func_convert_path_nix_to_cygwin ARG -# Convert path ARG from *nix to Cygwin format. Requires Cygwin installed in a -# a wine environment, working winepath, and LT_CYGPATH set. Returns result in -# func_to_host_file_result. -func_convert_path_nix_to_cygwin () -{ - $opt_debug - func_to_host_path_result="$1" - if test -n "$1"; then - # Remove leading and trailing path separator characters from - # ARG. msys behavior is inconsistent here, cygpath turns them - # into '.;' and ';.', and winepath ignores them completely. - func_stripname : : "$1" - func_to_host_path_tmp1=$func_stripname_result - func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1" - func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result" - func_to_host_path_result="$func_cygpath_result" - func_convert_path_check : : \ - "$func_to_host_path_tmp1" "$func_to_host_path_result" - func_convert_path_front_back_pathsep ":*" "*:" : "$1" - fi -} -# end func_convert_path_nix_to_cygwin - - -# func_mode_compile arg... -func_mode_compile () -{ - $opt_debug - # Get the compilation command and the source file. - base_compile= - srcfile="$nonopt" # always keep a non-empty value in "srcfile" - suppress_opt=yes - suppress_output= - arg_mode=normal - libobj= - later= - pie_flag= - - for arg - do - case $arg_mode in - arg ) - # do not "continue". Instead, add this to base_compile - lastarg="$arg" - arg_mode=normal - ;; - - target ) - libobj="$arg" - arg_mode=normal - continue - ;; - - normal ) - # Accept any command-line options. - case $arg in - -o) - test -n "$libobj" && \ - func_fatal_error "you cannot specify \`-o' more than once" - arg_mode=target - continue - ;; - - -pie | -fpie | -fPIE) - func_append pie_flag " $arg" - continue - ;; - - -shared | -static | -prefer-pic | -prefer-non-pic) - func_append later " $arg" - continue - ;; - - -no-suppress) - suppress_opt=no - continue - ;; - - -Xcompiler) - arg_mode=arg # the next one goes into the "base_compile" arg list - continue # The current "srcfile" will either be retained or - ;; # replaced later. I would guess that would be a bug. - - -Wc,*) - func_stripname '-Wc,' '' "$arg" - args=$func_stripname_result - lastarg= - save_ifs="$IFS"; IFS=',' - for arg in $args; do - IFS="$save_ifs" - func_append_quoted lastarg "$arg" - done - IFS="$save_ifs" - func_stripname ' ' '' "$lastarg" - lastarg=$func_stripname_result - - # Add the arguments to base_compile. - func_append base_compile " $lastarg" - continue - ;; - - *) - # Accept the current argument as the source file. - # The previous "srcfile" becomes the current argument. - # - lastarg="$srcfile" - srcfile="$arg" - ;; - esac # case $arg - ;; - esac # case $arg_mode - - # Aesthetically quote the previous argument. - func_append_quoted base_compile "$lastarg" - done # for arg - - case $arg_mode in - arg) - func_fatal_error "you must specify an argument for -Xcompile" - ;; - target) - func_fatal_error "you must specify a target with \`-o'" - ;; - *) - # Get the name of the library object. - test -z "$libobj" && { - func_basename "$srcfile" - libobj="$func_basename_result" - } - ;; - esac - - # Recognize several different file suffixes. - # If the user specifies -o file.o, it is replaced with file.lo - case $libobj in - *.[cCFSifmso] | \ - *.ada | *.adb | *.ads | *.asm | \ - *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \ - *.[fF][09]? | *.for | *.java | *.go | *.obj | *.sx | *.cu | *.cup) - func_xform "$libobj" - libobj=$func_xform_result - ;; - esac - - case $libobj in - *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;; - *) - func_fatal_error "cannot determine name of library object from \`$libobj'" - ;; - esac - - func_infer_tag $base_compile - - for arg in $later; do - case $arg in - -shared) - test "$build_libtool_libs" != yes && \ - func_fatal_configuration "can not build a shared library" - build_old_libs=no - continue - ;; - - -static) - build_libtool_libs=no - build_old_libs=yes - continue - ;; - - -prefer-pic) - pic_mode=yes - continue - ;; - - -prefer-non-pic) - pic_mode=no - continue - ;; - esac - done - - func_quote_for_eval "$libobj" - test "X$libobj" != "X$func_quote_for_eval_result" \ - && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \ - && func_warning "libobj name \`$libobj' may not contain shell special characters." - func_dirname_and_basename "$obj" "/" "" - objname="$func_basename_result" - xdir="$func_dirname_result" - lobj=${xdir}$objdir/$objname - - test -z "$base_compile" && \ - func_fatal_help "you must specify a compilation command" - - # Delete any leftover library objects. - if test "$build_old_libs" = yes; then - removelist="$obj $lobj $libobj ${libobj}T" - else - removelist="$lobj $libobj ${libobj}T" - fi - - # On Cygwin there's no "real" PIC flag so we must build both object types - case $host_os in - cygwin* | mingw* | pw32* | os2* | cegcc*) - pic_mode=default - ;; - esac - if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then - # non-PIC code in shared libraries is not supported - pic_mode=default - fi - - # Calculate the filename of the output object if compiler does - # not support -o with -c - if test "$compiler_c_o" = no; then - output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext} - lockfile="$output_obj.lock" - else - output_obj= - need_locks=no - lockfile= - fi - - # Lock this critical section if it is needed - # We use this script file to make the link, it avoids creating a new file - if test "$need_locks" = yes; then - until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do - func_echo "Waiting for $lockfile to be removed" - sleep 2 - done - elif test "$need_locks" = warn; then - if test -f "$lockfile"; then - $ECHO "\ -*** ERROR, $lockfile exists and contains: -`cat $lockfile 2>/dev/null` - -This indicates that another process is trying to use the same -temporary object file, and libtool could not work around it because -your compiler does not support \`-c' and \`-o' together. If you -repeat this compilation, it may succeed, by chance, but you had better -avoid parallel builds (make -j) in this platform, or get a better -compiler." - - $opt_dry_run || $RM $removelist - exit $EXIT_FAILURE - fi - func_append removelist " $output_obj" - $ECHO "$srcfile" > "$lockfile" - fi - - $opt_dry_run || $RM $removelist - func_append removelist " $lockfile" - trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15 - - func_to_tool_file "$srcfile" func_convert_file_msys_to_w32 - srcfile=$func_to_tool_file_result - func_quote_for_eval "$srcfile" - qsrcfile=$func_quote_for_eval_result - - # Only build a PIC object if we are building libtool libraries. - if test "$build_libtool_libs" = yes; then - # Without this assignment, base_compile gets emptied. - fbsd_hideous_sh_bug=$base_compile - - if test "$pic_mode" != no; then - command="$base_compile $qsrcfile $pic_flag" - else - # Don't build PIC code - command="$base_compile $qsrcfile" - fi - - func_mkdir_p "$xdir$objdir" - - if test -z "$output_obj"; then - # Place PIC objects in $objdir - func_append command " -o $lobj" - fi - - func_show_eval_locale "$command" \ - 'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE' - - if test "$need_locks" = warn && - test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then - $ECHO "\ -*** ERROR, $lockfile contains: -`cat $lockfile 2>/dev/null` - -but it should contain: -$srcfile - -This indicates that another process is trying to use the same -temporary object file, and libtool could not work around it because -your compiler does not support \`-c' and \`-o' together. If you -repeat this compilation, it may succeed, by chance, but you had better -avoid parallel builds (make -j) in this platform, or get a better -compiler." - - $opt_dry_run || $RM $removelist - exit $EXIT_FAILURE - fi - - # Just move the object if needed, then go on to compile the next one - if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then - func_show_eval '$MV "$output_obj" "$lobj"' \ - 'error=$?; $opt_dry_run || $RM $removelist; exit $error' - fi - - # Allow error messages only from the first compilation. - if test "$suppress_opt" = yes; then - suppress_output=' >/dev/null 2>&1' - fi - fi - - # Only build a position-dependent object if we build old libraries. - if test "$build_old_libs" = yes; then - if test "$pic_mode" != yes; then - # Don't build PIC code - command="$base_compile $qsrcfile$pie_flag" - else - command="$base_compile $qsrcfile $pic_flag" - fi - if test "$compiler_c_o" = yes; then - func_append command " -o $obj" - fi - - # Suppress compiler output if we already did a PIC compilation. - func_append command "$suppress_output" - func_show_eval_locale "$command" \ - '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' - - if test "$need_locks" = warn && - test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then - $ECHO "\ -*** ERROR, $lockfile contains: -`cat $lockfile 2>/dev/null` - -but it should contain: -$srcfile - -This indicates that another process is trying to use the same -temporary object file, and libtool could not work around it because -your compiler does not support \`-c' and \`-o' together. If you -repeat this compilation, it may succeed, by chance, but you had better -avoid parallel builds (make -j) in this platform, or get a better -compiler." - - $opt_dry_run || $RM $removelist - exit $EXIT_FAILURE - fi - - # Just move the object if needed - if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then - func_show_eval '$MV "$output_obj" "$obj"' \ - 'error=$?; $opt_dry_run || $RM $removelist; exit $error' - fi - fi - - $opt_dry_run || { - func_write_libtool_object "$libobj" "$objdir/$objname" "$objname" - - # Unlock the critical section if it was locked - if test "$need_locks" != no; then - removelist=$lockfile - $RM "$lockfile" - fi - } - - exit $EXIT_SUCCESS -} - -$opt_help || { - test "$opt_mode" = compile && func_mode_compile ${1+"$@"} -} - -func_mode_help () -{ - # We need to display help for each of the modes. - case $opt_mode in - "") - # Generic help is extracted from the usage comments - # at the start of this file. - func_help - ;; - - clean) - $ECHO \ -"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE... - -Remove files from the build directory. - -RM is the name of the program to use to delete files associated with each FILE -(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed -to RM. - -If FILE is a libtool library, object or program, all the files associated -with it are deleted. Otherwise, only FILE itself is deleted using RM." - ;; - - compile) - $ECHO \ -"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE - -Compile a source file into a libtool library object. - -This mode accepts the following additional options: - - -o OUTPUT-FILE set the output file name to OUTPUT-FILE - -no-suppress do not suppress compiler output for multiple passes - -prefer-pic try to build PIC objects only - -prefer-non-pic try to build non-PIC objects only - -shared do not build a \`.o' file suitable for static linking - -static only build a \`.o' file suitable for static linking - -Wc,FLAG pass FLAG directly to the compiler - -COMPILE-COMMAND is a command to be used in creating a \`standard' object file -from the given SOURCEFILE. - -The output file name is determined by removing the directory component from -SOURCEFILE, then substituting the C source code suffix \`.c' with the -library object suffix, \`.lo'." - ;; - - execute) - $ECHO \ -"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]... - -Automatically set library path, then run a program. - -This mode accepts the following additional options: - - -dlopen FILE add the directory containing FILE to the library path - -This mode sets the library path environment variable according to \`-dlopen' -flags. - -If any of the ARGS are libtool executable wrappers, then they are translated -into their corresponding uninstalled binary, and any of their required library -directories are added to the library path. - -Then, COMMAND is executed, with ARGS as arguments." - ;; - - finish) - $ECHO \ -"Usage: $progname [OPTION]... --mode=finish [LIBDIR]... - -Complete the installation of libtool libraries. - -Each LIBDIR is a directory that contains libtool libraries. - -The commands that this mode executes may require superuser privileges. Use -the \`--dry-run' option if you just want to see what would be executed." - ;; - - install) - $ECHO \ -"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND... - -Install executables or libraries. - -INSTALL-COMMAND is the installation command. The first component should be -either the \`install' or \`cp' program. - -The following components of INSTALL-COMMAND are treated specially: - - -inst-prefix-dir PREFIX-DIR Use PREFIX-DIR as a staging area for installation - -The rest of the components are interpreted as arguments to that command (only -BSD-compatible install options are recognized)." - ;; - - link) - $ECHO \ -"Usage: $progname [OPTION]... --mode=link LINK-COMMAND... - -Link object files or libraries together to form another library, or to -create an executable program. - -LINK-COMMAND is a command using the C compiler that you would use to create -a program from several object files. - -The following components of LINK-COMMAND are treated specially: - - -all-static do not do any dynamic linking at all - -avoid-version do not add a version suffix if possible - -bindir BINDIR specify path to binaries directory (for systems where - libraries must be found in the PATH setting at runtime) - -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime - -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols - -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) - -export-symbols SYMFILE - try to export only the symbols listed in SYMFILE - -export-symbols-regex REGEX - try to export only the symbols matching REGEX - -LLIBDIR search LIBDIR for required installed libraries - -lNAME OUTPUT-FILE requires the installed library libNAME - -module build a library that can dlopened - -no-fast-install disable the fast-install mode - -no-install link a not-installable executable - -no-undefined declare that a library does not refer to external symbols - -o OUTPUT-FILE create OUTPUT-FILE from the specified objects - -objectlist FILE Use a list of object files found in FILE to specify objects - -precious-files-regex REGEX - don't remove output files matching REGEX - -release RELEASE specify package release information - -rpath LIBDIR the created library will eventually be installed in LIBDIR - -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries - -shared only do dynamic linking of libtool libraries - -shrext SUFFIX override the standard shared library file extension - -static do not do any dynamic linking of uninstalled libtool libraries - -static-libtool-libs - do not do any dynamic linking of libtool libraries - -version-info CURRENT[:REVISION[:AGE]] - specify library version info [each variable defaults to 0] - -weak LIBNAME declare that the target provides the LIBNAME interface - -Wc,FLAG - -Xcompiler FLAG pass linker-specific FLAG directly to the compiler - -Wl,FLAG - -Xlinker FLAG pass linker-specific FLAG directly to the linker - -XCClinker FLAG pass link-specific FLAG to the compiler driver (CC) - -All other options (arguments beginning with \`-') are ignored. - -Every other argument is treated as a filename. Files ending in \`.la' are -treated as uninstalled libtool libraries, other files are standard or library -object files. - -If the OUTPUT-FILE ends in \`.la', then a libtool library is created, -only library objects (\`.lo' files) may be specified, and \`-rpath' is -required, except when creating a convenience library. - -If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created -using \`ar' and \`ranlib', or on Windows using \`lib'. - -If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file -is created, otherwise an executable program is created." - ;; - - uninstall) - $ECHO \ -"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... - -Remove libraries from an installation directory. - -RM is the name of the program to use to delete files associated with each FILE -(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed -to RM. - -If FILE is a libtool library, all the files associated with it are deleted. -Otherwise, only FILE itself is deleted using RM." - ;; - - *) - func_fatal_help "invalid operation mode \`$opt_mode'" - ;; - esac - - echo - $ECHO "Try \`$progname --help' for more information about other modes." -} - -# Now that we've collected a possible --mode arg, show help if necessary -if $opt_help; then - if test "$opt_help" = :; then - func_mode_help - else - { - func_help noexit - for opt_mode in compile link execute install finish uninstall clean; do - func_mode_help - done - } | sed -n '1p; 2,$s/^Usage:/ or: /p' - { - func_help noexit - for opt_mode in compile link execute install finish uninstall clean; do - echo - func_mode_help - done - } | - sed '1d - /^When reporting/,/^Report/{ - H - d - } - $x - /information about other modes/d - /more detailed .*MODE/d - s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/' - fi - exit $? -fi - - -# func_mode_execute arg... -func_mode_execute () -{ - $opt_debug - # The first argument is the command name. - cmd="$nonopt" - test -z "$cmd" && \ - func_fatal_help "you must specify a COMMAND" - - # Handle -dlopen flags immediately. - for file in $opt_dlopen; do - test -f "$file" \ - || func_fatal_help "\`$file' is not a file" - - dir= - case $file in - *.la) - func_resolve_sysroot "$file" - file=$func_resolve_sysroot_result - - # Check to see that this really is a libtool archive. - func_lalib_unsafe_p "$file" \ - || func_fatal_help "\`$lib' is not a valid libtool archive" - - # Read the libtool library. - dlname= - library_names= - func_source "$file" - - # Skip this library if it cannot be dlopened. - if test -z "$dlname"; then - # Warn if it was a shared library. - test -n "$library_names" && \ - func_warning "\`$file' was not linked with \`-export-dynamic'" - continue - fi - - func_dirname "$file" "" "." - dir="$func_dirname_result" - - if test -f "$dir/$objdir/$dlname"; then - func_append dir "/$objdir" - else - if test ! -f "$dir/$dlname"; then - func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" - fi - fi - ;; - - *.lo) - # Just add the directory containing the .lo file. - func_dirname "$file" "" "." - dir="$func_dirname_result" - ;; - - *) - func_warning "\`-dlopen' is ignored for non-libtool libraries and objects" - continue - ;; - esac - - # Get the absolute pathname. - absdir=`cd "$dir" && pwd` - test -n "$absdir" && dir="$absdir" - - # Now add the directory to shlibpath_var. - if eval "test -z \"\$$shlibpath_var\""; then - eval "$shlibpath_var=\"\$dir\"" - else - eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" - fi - done - - # This variable tells wrapper scripts just to set shlibpath_var - # rather than running their programs. - libtool_execute_magic="$magic" - - # Check if any of the arguments is a wrapper script. - args= - for file - do - case $file in - -* | *.la | *.lo ) ;; - *) - # Do a test to see if this is really a libtool program. - if func_ltwrapper_script_p "$file"; then - func_source "$file" - # Transform arg to wrapped name. - file="$progdir/$program" - elif func_ltwrapper_executable_p "$file"; then - func_ltwrapper_scriptname "$file" - func_source "$func_ltwrapper_scriptname_result" - # Transform arg to wrapped name. - file="$progdir/$program" - fi - ;; - esac - # Quote arguments (to preserve shell metacharacters). - func_append_quoted args "$file" - done - - if test "X$opt_dry_run" = Xfalse; then - if test -n "$shlibpath_var"; then - # Export the shlibpath_var. - eval "export $shlibpath_var" - fi - - # Restore saved environment variables - for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES - do - eval "if test \"\${save_$lt_var+set}\" = set; then - $lt_var=\$save_$lt_var; export $lt_var - else - $lt_unset $lt_var - fi" - done - - # Now prepare to actually exec the command. - exec_cmd="\$cmd$args" - else - # Display what would be done. - if test -n "$shlibpath_var"; then - eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\"" - echo "export $shlibpath_var" - fi - $ECHO "$cmd$args" - exit $EXIT_SUCCESS - fi -} - -test "$opt_mode" = execute && func_mode_execute ${1+"$@"} - - -# func_mode_finish arg... -func_mode_finish () -{ - $opt_debug - libs= - libdirs= - admincmds= - - for opt in "$nonopt" ${1+"$@"} - do - if test -d "$opt"; then - func_append libdirs " $opt" - - elif test -f "$opt"; then - if func_lalib_unsafe_p "$opt"; then - func_append libs " $opt" - else - func_warning "\`$opt' is not a valid libtool archive" - fi - - else - func_fatal_error "invalid argument \`$opt'" - fi - done - - if test -n "$libs"; then - if test -n "$lt_sysroot"; then - sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"` - sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;" - else - sysroot_cmd= - fi - - # Remove sysroot references - if $opt_dry_run; then - for lib in $libs; do - echo "removing references to $lt_sysroot and \`=' prefixes from $lib" - done - else - tmpdir=`func_mktempdir` - for lib in $libs; do - sed -e "${sysroot_cmd} s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \ - > $tmpdir/tmp-la - mv -f $tmpdir/tmp-la $lib - done - ${RM}r "$tmpdir" - fi - fi - - if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then - for libdir in $libdirs; do - if test -n "$finish_cmds"; then - # Do each command in the finish commands. - func_execute_cmds "$finish_cmds" 'admincmds="$admincmds -'"$cmd"'"' - fi - if test -n "$finish_eval"; then - # Do the single finish_eval. - eval cmds=\"$finish_eval\" - $opt_dry_run || eval "$cmds" || func_append admincmds " - $cmds" - fi - done - fi - - # Exit here if they wanted silent mode. - $opt_silent && exit $EXIT_SUCCESS - - if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then - echo "----------------------------------------------------------------------" - echo "Libraries have been installed in:" - for libdir in $libdirs; do - $ECHO " $libdir" - done - echo - echo "If you ever happen to want to link against installed libraries" - echo "in a given directory, LIBDIR, you must either use libtool, and" - echo "specify the full pathname of the library, or use the \`-LLIBDIR'" - echo "flag during linking and do at least one of the following:" - if test -n "$shlibpath_var"; then - echo " - add LIBDIR to the \`$shlibpath_var' environment variable" - echo " during execution" - fi - if test -n "$runpath_var"; then - echo " - add LIBDIR to the \`$runpath_var' environment variable" - echo " during linking" - fi - if test -n "$hardcode_libdir_flag_spec"; then - libdir=LIBDIR - eval flag=\"$hardcode_libdir_flag_spec\" - - $ECHO " - use the \`$flag' linker flag" - fi - if test -n "$admincmds"; then - $ECHO " - have your system administrator run these commands:$admincmds" - fi - if test -f /etc/ld.so.conf; then - echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" - fi - echo - - echo "See any operating system documentation about shared libraries for" - case $host in - solaris2.[6789]|solaris2.1[0-9]) - echo "more information, such as the ld(1), crle(1) and ld.so(8) manual" - echo "pages." - ;; - *) - echo "more information, such as the ld(1) and ld.so(8) manual pages." - ;; - esac - echo "----------------------------------------------------------------------" - fi - exit $EXIT_SUCCESS -} - -test "$opt_mode" = finish && func_mode_finish ${1+"$@"} - - -# func_mode_install arg... -func_mode_install () -{ - $opt_debug - # There may be an optional sh(1) argument at the beginning of - # install_prog (especially on Windows NT). - if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || - # Allow the use of GNU shtool's install command. - case $nonopt in *shtool*) :;; *) false;; esac; then - # Aesthetically quote it. - func_quote_for_eval "$nonopt" - install_prog="$func_quote_for_eval_result " - arg=$1 - shift - else - install_prog= - arg=$nonopt - fi - - # The real first argument should be the name of the installation program. - # Aesthetically quote it. - func_quote_for_eval "$arg" - func_append install_prog "$func_quote_for_eval_result" - install_shared_prog=$install_prog - case " $install_prog " in - *[\\\ /]cp\ *) install_cp=: ;; - *) install_cp=false ;; - esac - - # We need to accept at least all the BSD install flags. - dest= - files= - opts= - prev= - install_type= - isdir=no - stripme= - no_mode=: - for arg - do - arg2= - if test -n "$dest"; then - func_append files " $dest" - dest=$arg - continue - fi - - case $arg in - -d) isdir=yes ;; - -f) - if $install_cp; then :; else - prev=$arg - fi - ;; - -g | -m | -o) - prev=$arg - ;; - -s) - stripme=" -s" - continue - ;; - -*) - ;; - *) - # If the previous option needed an argument, then skip it. - if test -n "$prev"; then - if test "x$prev" = x-m && test -n "$install_override_mode"; then - arg2=$install_override_mode - no_mode=false - fi - prev= - else - dest=$arg - continue - fi - ;; - esac - - # Aesthetically quote the argument. - func_quote_for_eval "$arg" - func_append install_prog " $func_quote_for_eval_result" - if test -n "$arg2"; then - func_quote_for_eval "$arg2" - fi - func_append install_shared_prog " $func_quote_for_eval_result" - done - - test -z "$install_prog" && \ - func_fatal_help "you must specify an install program" - - test -n "$prev" && \ - func_fatal_help "the \`$prev' option requires an argument" - - if test -n "$install_override_mode" && $no_mode; then - if $install_cp; then :; else - func_quote_for_eval "$install_override_mode" - func_append install_shared_prog " -m $func_quote_for_eval_result" - fi - fi - - if test -z "$files"; then - if test -z "$dest"; then - func_fatal_help "no file or destination specified" - else - func_fatal_help "you must specify a destination" - fi - fi - - # Strip any trailing slash from the destination. - func_stripname '' '/' "$dest" - dest=$func_stripname_result - - # Check to see that the destination is a directory. - test -d "$dest" && isdir=yes - if test "$isdir" = yes; then - destdir="$dest" - destname= - else - func_dirname_and_basename "$dest" "" "." - destdir="$func_dirname_result" - destname="$func_basename_result" - - # Not a directory, so check to see that there is only one file specified. - set dummy $files; shift - test "$#" -gt 1 && \ - func_fatal_help "\`$dest' is not a directory" - fi - case $destdir in - [\\/]* | [A-Za-z]:[\\/]*) ;; - *) - for file in $files; do - case $file in - *.lo) ;; - *) - func_fatal_help "\`$destdir' must be an absolute directory name" - ;; - esac - done - ;; - esac - - # This variable tells wrapper scripts just to set variables rather - # than running their programs. - libtool_install_magic="$magic" - - staticlibs= - future_libdirs= - current_libdirs= - for file in $files; do - - # Do each installation. - case $file in - *.$libext) - # Do the static libraries later. - func_append staticlibs " $file" - ;; - - *.la) - func_resolve_sysroot "$file" - file=$func_resolve_sysroot_result - - # Check to see that this really is a libtool archive. - func_lalib_unsafe_p "$file" \ - || func_fatal_help "\`$file' is not a valid libtool archive" - - library_names= - old_library= - relink_command= - func_source "$file" - - # Add the libdir to current_libdirs if it is the destination. - if test "X$destdir" = "X$libdir"; then - case "$current_libdirs " in - *" $libdir "*) ;; - *) func_append current_libdirs " $libdir" ;; - esac - else - # Note the libdir as a future libdir. - case "$future_libdirs " in - *" $libdir "*) ;; - *) func_append future_libdirs " $libdir" ;; - esac - fi - - func_dirname "$file" "/" "" - dir="$func_dirname_result" - func_append dir "$objdir" - - if test -n "$relink_command"; then - # Determine the prefix the user has applied to our future dir. - inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"` - - # Don't allow the user to place us outside of our expected - # location b/c this prevents finding dependent libraries that - # are installed to the same prefix. - # At present, this check doesn't affect windows .dll's that - # are installed into $libdir/../bin (currently, that works fine) - # but it's something to keep an eye on. - test "$inst_prefix_dir" = "$destdir" && \ - func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir" - - if test -n "$inst_prefix_dir"; then - # Stick the inst_prefix_dir data into the link command. - relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` - else - relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"` - fi - - func_warning "relinking \`$file'" - func_show_eval "$relink_command" \ - 'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"' - fi - - # See the names of the shared library. - set dummy $library_names; shift - if test -n "$1"; then - realname="$1" - shift - - srcname="$realname" - test -n "$relink_command" && srcname="$realname"T - - # Install the shared library and build the symlinks. - func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \ - 'exit $?' - tstripme="$stripme" - case $host_os in - cygwin* | mingw* | pw32* | cegcc*) - case $realname in - *.dll.a) - tstripme="" - ;; - esac - ;; - esac - if test -n "$tstripme" && test -n "$striplib"; then - func_show_eval "$striplib $destdir/$realname" 'exit $?' - fi - - if test "$#" -gt 0; then - # Delete the old symlinks, and create new ones. - # Try `ln -sf' first, because the `ln' binary might depend on - # the symlink we replace! Solaris /bin/ln does not understand -f, - # so we also need to try rm && ln -s. - for linkname - do - test "$linkname" != "$realname" \ - && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })" - done - fi - - # Do each command in the postinstall commands. - lib="$destdir/$realname" - func_execute_cmds "$postinstall_cmds" 'exit $?' - fi - - # Install the pseudo-library for information purposes. - func_basename "$file" - name="$func_basename_result" - instname="$dir/$name"i - func_show_eval "$install_prog $instname $destdir/$name" 'exit $?' - - # Maybe install the static library, too. - test -n "$old_library" && func_append staticlibs " $dir/$old_library" - ;; - - *.lo) - # Install (i.e. copy) a libtool object. - - # Figure out destination file name, if it wasn't already specified. - if test -n "$destname"; then - destfile="$destdir/$destname" - else - func_basename "$file" - destfile="$func_basename_result" - destfile="$destdir/$destfile" - fi - - # Deduce the name of the destination old-style object file. - case $destfile in - *.lo) - func_lo2o "$destfile" - staticdest=$func_lo2o_result - ;; - *.$objext) - staticdest="$destfile" - destfile= - ;; - *) - func_fatal_help "cannot copy a libtool object to \`$destfile'" - ;; - esac - - # Install the libtool object if requested. - test -n "$destfile" && \ - func_show_eval "$install_prog $file $destfile" 'exit $?' - - # Install the old object if enabled. - if test "$build_old_libs" = yes; then - # Deduce the name of the old-style object file. - func_lo2o "$file" - staticobj=$func_lo2o_result - func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?' - fi - exit $EXIT_SUCCESS - ;; - - *) - # Figure out destination file name, if it wasn't already specified. - if test -n "$destname"; then - destfile="$destdir/$destname" - else - func_basename "$file" - destfile="$func_basename_result" - destfile="$destdir/$destfile" - fi - - # If the file is missing, and there is a .exe on the end, strip it - # because it is most likely a libtool script we actually want to - # install - stripped_ext="" - case $file in - *.exe) - if test ! -f "$file"; then - func_stripname '' '.exe' "$file" - file=$func_stripname_result - stripped_ext=".exe" - fi - ;; - esac - - # Do a test to see if this is really a libtool program. - case $host in - *cygwin* | *mingw*) - if func_ltwrapper_executable_p "$file"; then - func_ltwrapper_scriptname "$file" - wrapper=$func_ltwrapper_scriptname_result - else - func_stripname '' '.exe' "$file" - wrapper=$func_stripname_result - fi - ;; - *) - wrapper=$file - ;; - esac - if func_ltwrapper_script_p "$wrapper"; then - notinst_deplibs= - relink_command= - - func_source "$wrapper" - - # Check the variables that should have been set. - test -z "$generated_by_libtool_version" && \ - func_fatal_error "invalid libtool wrapper script \`$wrapper'" - - finalize=yes - for lib in $notinst_deplibs; do - # Check to see that each library is installed. - libdir= - if test -f "$lib"; then - func_source "$lib" - fi - libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test - if test -n "$libdir" && test ! -f "$libfile"; then - func_warning "\`$lib' has not been installed in \`$libdir'" - finalize=no - fi - done - - relink_command= - func_source "$wrapper" - - outputname= - if test "$fast_install" = no && test -n "$relink_command"; then - $opt_dry_run || { - if test "$finalize" = yes; then - tmpdir=`func_mktempdir` - func_basename "$file$stripped_ext" - file="$func_basename_result" - outputname="$tmpdir/$file" - # Replace the output file specification. - relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'` - - $opt_silent || { - func_quote_for_expand "$relink_command" - eval "func_echo $func_quote_for_expand_result" - } - if eval "$relink_command"; then : - else - func_error "error: relink \`$file' with the above command before installing it" - $opt_dry_run || ${RM}r "$tmpdir" - continue - fi - file="$outputname" - else - func_warning "cannot relink \`$file'" - fi - } - else - # Install the binary that we compiled earlier. - file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"` - fi - fi - - # remove .exe since cygwin /usr/bin/install will append another - # one anyway - case $install_prog,$host in - */usr/bin/install*,*cygwin*) - case $file:$destfile in - *.exe:*.exe) - # this is ok - ;; - *.exe:*) - destfile=$destfile.exe - ;; - *:*.exe) - func_stripname '' '.exe' "$destfile" - destfile=$func_stripname_result - ;; - esac - ;; - esac - func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?' - $opt_dry_run || if test -n "$outputname"; then - ${RM}r "$tmpdir" - fi - ;; - esac - done - - for file in $staticlibs; do - func_basename "$file" - name="$func_basename_result" - - # Set up the ranlib parameters. - oldlib="$destdir/$name" - func_to_tool_file "$oldlib" func_convert_file_msys_to_w32 - tool_oldlib=$func_to_tool_file_result - - func_show_eval "$install_prog \$file \$oldlib" 'exit $?' - - if test -n "$stripme" && test -n "$old_striplib"; then - func_show_eval "$old_striplib $tool_oldlib" 'exit $?' - fi - - # Do each command in the postinstall commands. - func_execute_cmds "$old_postinstall_cmds" 'exit $?' - done - - test -n "$future_libdirs" && \ - func_warning "remember to run \`$progname --finish$future_libdirs'" - - if test -n "$current_libdirs"; then - # Maybe just do a dry run. - $opt_dry_run && current_libdirs=" -n$current_libdirs" - exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs' - else - exit $EXIT_SUCCESS - fi -} - -test "$opt_mode" = install && func_mode_install ${1+"$@"} - - -# func_generate_dlsyms outputname originator pic_p -# Extract symbols from dlprefiles and create ${outputname}S.o with -# a dlpreopen symbol table. -func_generate_dlsyms () -{ - $opt_debug - my_outputname="$1" - my_originator="$2" - my_pic_p="${3-no}" - my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'` - my_dlsyms= - - if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then - if test -n "$NM" && test -n "$global_symbol_pipe"; then - my_dlsyms="${my_outputname}S.c" - else - func_error "not configured to extract global symbols from dlpreopened files" - fi - fi - - if test -n "$my_dlsyms"; then - case $my_dlsyms in - "") ;; - *.c) - # Discover the nlist of each of the dlfiles. - nlist="$output_objdir/${my_outputname}.nm" - - func_show_eval "$RM $nlist ${nlist}S ${nlist}T" - - # Parse the name list into a source file. - func_verbose "creating $output_objdir/$my_dlsyms" - - $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\ -/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */ -/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */ - -#ifdef __cplusplus -extern \"C\" { -#endif - -#if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4)) -#pragma GCC diagnostic ignored \"-Wstrict-prototypes\" -#endif - -/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ -#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) -/* DATA imports from DLLs on WIN32 con't be const, because runtime - relocations are performed -- see ld's documentation on pseudo-relocs. */ -# define LT_DLSYM_CONST -#elif defined(__osf__) -/* This system does not cope well with relocations in const data. */ -# define LT_DLSYM_CONST -#else -# define LT_DLSYM_CONST const -#endif - -/* External symbol declarations for the compiler. */\ -" - - if test "$dlself" = yes; then - func_verbose "generating symbol list for \`$output'" - - $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist" - - # Add our own program objects to the symbol list. - progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP` - for progfile in $progfiles; do - func_to_tool_file "$progfile" func_convert_file_msys_to_w32 - func_verbose "extracting global C symbols from \`$func_to_tool_file_result'" - $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'" - done - - if test -n "$exclude_expsyms"; then - $opt_dry_run || { - eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' - eval '$MV "$nlist"T "$nlist"' - } - fi - - if test -n "$export_symbols_regex"; then - $opt_dry_run || { - eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T' - eval '$MV "$nlist"T "$nlist"' - } - fi - - # Prepare the list of exported symbols - if test -z "$export_symbols"; then - export_symbols="$output_objdir/$outputname.exp" - $opt_dry_run || { - $RM $export_symbols - eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' - case $host in - *cygwin* | *mingw* | *cegcc* ) - eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' - eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"' - ;; - esac - } - else - $opt_dry_run || { - eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' - eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' - eval '$MV "$nlist"T "$nlist"' - case $host in - *cygwin* | *mingw* | *cegcc* ) - eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' - eval 'cat "$nlist" >> "$output_objdir/$outputname.def"' - ;; - esac - } - fi - fi - - for dlprefile in $dlprefiles; do - func_verbose "extracting global C symbols from \`$dlprefile'" - func_basename "$dlprefile" - name="$func_basename_result" - case $host in - *cygwin* | *mingw* | *cegcc* ) - # if an import library, we need to obtain dlname - if func_win32_import_lib_p "$dlprefile"; then - func_tr_sh "$dlprefile" - eval "curr_lafile=\$libfile_$func_tr_sh_result" - dlprefile_dlbasename="" - if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then - # Use subshell, to avoid clobbering current variable values - dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"` - if test -n "$dlprefile_dlname" ; then - func_basename "$dlprefile_dlname" - dlprefile_dlbasename="$func_basename_result" - else - # no lafile. user explicitly requested -dlpreopen . - $sharedlib_from_linklib_cmd "$dlprefile" - dlprefile_dlbasename=$sharedlib_from_linklib_result - fi - fi - $opt_dry_run || { - if test -n "$dlprefile_dlbasename" ; then - eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"' - else - func_warning "Could not compute DLL name from $name" - eval '$ECHO ": $name " >> "$nlist"' - fi - func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 - eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe | - $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'" - } - else # not an import lib - $opt_dry_run || { - eval '$ECHO ": $name " >> "$nlist"' - func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 - eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'" - } - fi - ;; - *) - $opt_dry_run || { - eval '$ECHO ": $name " >> "$nlist"' - func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 - eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'" - } - ;; - esac - done - - $opt_dry_run || { - # Make sure we have at least an empty file. - test -f "$nlist" || : > "$nlist" - - if test -n "$exclude_expsyms"; then - $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T - $MV "$nlist"T "$nlist" - fi - - # Try sorting and uniquifying the output. - if $GREP -v "^: " < "$nlist" | - if sort -k 3 /dev/null 2>&1; then - sort -k 3 - else - sort +2 - fi | - uniq > "$nlist"S; then - : - else - $GREP -v "^: " < "$nlist" > "$nlist"S - fi - - if test -f "$nlist"S; then - eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"' - else - echo '/* NONE */' >> "$output_objdir/$my_dlsyms" - fi - - echo >> "$output_objdir/$my_dlsyms" "\ - -/* The mapping between symbol names and symbols. */ -typedef struct { - const char *name; - void *address; -} lt_dlsymlist; -extern LT_DLSYM_CONST lt_dlsymlist -lt_${my_prefix}_LTX_preloaded_symbols[]; -LT_DLSYM_CONST lt_dlsymlist -lt_${my_prefix}_LTX_preloaded_symbols[] = -{\ - { \"$my_originator\", (void *) 0 }," - - case $need_lib_prefix in - no) - eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms" - ;; - *) - eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms" - ;; - esac - echo >> "$output_objdir/$my_dlsyms" "\ - {0, (void *) 0} -}; - -/* This works around a problem in FreeBSD linker */ -#ifdef FREEBSD_WORKAROUND -static const void *lt_preloaded_setup() { - return lt_${my_prefix}_LTX_preloaded_symbols; -} -#endif - -#ifdef __cplusplus -} -#endif\ -" - } # !$opt_dry_run - - pic_flag_for_symtable= - case "$compile_command " in - *" -static "*) ;; - *) - case $host in - # compiling the symbol table file with pic_flag works around - # a FreeBSD bug that causes programs to crash when -lm is - # linked before any other PIC object. But we must not use - # pic_flag when linking with -static. The problem exists in - # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. - *-*-freebsd2.*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) - pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;; - *-*-hpux*) - pic_flag_for_symtable=" $pic_flag" ;; - *) - if test "X$my_pic_p" != Xno; then - pic_flag_for_symtable=" $pic_flag" - fi - ;; - esac - ;; - esac - symtab_cflags= - for arg in $LTCFLAGS; do - case $arg in - -pie | -fpie | -fPIE) ;; - *) func_append symtab_cflags " $arg" ;; - esac - done - - # Now compile the dynamic symbol file. - func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?' - - # Clean up the generated files. - func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"' - - # Transform the symbol file into the correct name. - symfileobj="$output_objdir/${my_outputname}S.$objext" - case $host in - *cygwin* | *mingw* | *cegcc* ) - if test -f "$output_objdir/$my_outputname.def"; then - compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` - finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` - else - compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"` - finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"` - fi - ;; - *) - compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"` - finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"` - ;; - esac - ;; - *) - func_fatal_error "unknown suffix for \`$my_dlsyms'" - ;; - esac - else - # We keep going just in case the user didn't refer to - # lt_preloaded_symbols. The linker will fail if global_symbol_pipe - # really was required. - - # Nullify the symbol file. - compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"` - finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"` - fi -} - -# func_win32_libid arg -# return the library type of file 'arg' -# -# Need a lot of goo to handle *both* DLLs and import libs -# Has to be a shell function in order to 'eat' the argument -# that is supplied when $file_magic_command is called. -# Despite the name, also deal with 64 bit binaries. -func_win32_libid () -{ - $opt_debug - win32_libid_type="unknown" - win32_fileres=`file -L $1 2>/dev/null` - case $win32_fileres in - *ar\ archive\ import\ library*) # definitely import - win32_libid_type="x86 archive import" - ;; - *ar\ archive*) # could be an import, or static - # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD. - if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | - $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then - func_to_tool_file "$1" func_convert_file_msys_to_w32 - win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" | - $SED -n -e ' - 1,100{ - / I /{ - s,.*,import, - p - q - } - }'` - case $win32_nmres in - import*) win32_libid_type="x86 archive import";; - *) win32_libid_type="x86 archive static";; - esac - fi - ;; - *DLL*) - win32_libid_type="x86 DLL" - ;; - *executable*) # but shell scripts are "executable" too... - case $win32_fileres in - *MS\ Windows\ PE\ Intel*) - win32_libid_type="x86 DLL" - ;; - esac - ;; - esac - $ECHO "$win32_libid_type" -} - -# func_cygming_dll_for_implib ARG -# -# Platform-specific function to extract the -# name of the DLL associated with the specified -# import library ARG. -# Invoked by eval'ing the libtool variable -# $sharedlib_from_linklib_cmd -# Result is available in the variable -# $sharedlib_from_linklib_result -func_cygming_dll_for_implib () -{ - $opt_debug - sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"` -} - -# func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs -# -# The is the core of a fallback implementation of a -# platform-specific function to extract the name of the -# DLL associated with the specified import library LIBNAME. -# -# SECTION_NAME is either .idata$6 or .idata$7, depending -# on the platform and compiler that created the implib. -# -# Echos the name of the DLL associated with the -# specified import library. -func_cygming_dll_for_implib_fallback_core () -{ - $opt_debug - match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"` - $OBJDUMP -s --section "$1" "$2" 2>/dev/null | - $SED '/^Contents of section '"$match_literal"':/{ - # Place marker at beginning of archive member dllname section - s/.*/====MARK====/ - p - d - } - # These lines can sometimes be longer than 43 characters, but - # are always uninteresting - /:[ ]*file format pe[i]\{,1\}-/d - /^In archive [^:]*:/d - # Ensure marker is printed - /^====MARK====/p - # Remove all lines with less than 43 characters - /^.\{43\}/!d - # From remaining lines, remove first 43 characters - s/^.\{43\}//' | - $SED -n ' - # Join marker and all lines until next marker into a single line - /^====MARK====/ b para - H - $ b para - b - :para - x - s/\n//g - # Remove the marker - s/^====MARK====// - # Remove trailing dots and whitespace - s/[\. \t]*$// - # Print - /./p' | - # we now have a list, one entry per line, of the stringified - # contents of the appropriate section of all members of the - # archive which possess that section. Heuristic: eliminate - # all those which have a first or second character that is - # a '.' (that is, objdump's representation of an unprintable - # character.) This should work for all archives with less than - # 0x302f exports -- but will fail for DLLs whose name actually - # begins with a literal '.' or a single character followed by - # a '.'. - # - # Of those that remain, print the first one. - $SED -e '/^\./d;/^.\./d;q' -} - -# func_cygming_gnu_implib_p ARG -# This predicate returns with zero status (TRUE) if -# ARG is a GNU/binutils-style import library. Returns -# with nonzero status (FALSE) otherwise. -func_cygming_gnu_implib_p () -{ - $opt_debug - func_to_tool_file "$1" func_convert_file_msys_to_w32 - func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'` - test -n "$func_cygming_gnu_implib_tmp" -} - -# func_cygming_ms_implib_p ARG -# This predicate returns with zero status (TRUE) if -# ARG is an MS-style import library. Returns -# with nonzero status (FALSE) otherwise. -func_cygming_ms_implib_p () -{ - $opt_debug - func_to_tool_file "$1" func_convert_file_msys_to_w32 - func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'` - test -n "$func_cygming_ms_implib_tmp" -} - -# func_cygming_dll_for_implib_fallback ARG -# Platform-specific function to extract the -# name of the DLL associated with the specified -# import library ARG. -# -# This fallback implementation is for use when $DLLTOOL -# does not support the --identify-strict option. -# Invoked by eval'ing the libtool variable -# $sharedlib_from_linklib_cmd -# Result is available in the variable -# $sharedlib_from_linklib_result -func_cygming_dll_for_implib_fallback () -{ - $opt_debug - if func_cygming_gnu_implib_p "$1" ; then - # binutils import library - sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"` - elif func_cygming_ms_implib_p "$1" ; then - # ms-generated import library - sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"` - else - # unknown - sharedlib_from_linklib_result="" - fi -} - - -# func_extract_an_archive dir oldlib -func_extract_an_archive () -{ - $opt_debug - f_ex_an_ar_dir="$1"; shift - f_ex_an_ar_oldlib="$1" - if test "$lock_old_archive_extraction" = yes; then - lockfile=$f_ex_an_ar_oldlib.lock - until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do - func_echo "Waiting for $lockfile to be removed" - sleep 2 - done - fi - func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \ - 'stat=$?; rm -f "$lockfile"; exit $stat' - if test "$lock_old_archive_extraction" = yes; then - $opt_dry_run || rm -f "$lockfile" - fi - if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then - : - else - func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" - fi -} - - -# func_extract_archives gentop oldlib ... -func_extract_archives () -{ - $opt_debug - my_gentop="$1"; shift - my_oldlibs=${1+"$@"} - my_oldobjs="" - my_xlib="" - my_xabs="" - my_xdir="" - - for my_xlib in $my_oldlibs; do - # Extract the objects. - case $my_xlib in - [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;; - *) my_xabs=`pwd`"/$my_xlib" ;; - esac - func_basename "$my_xlib" - my_xlib="$func_basename_result" - my_xlib_u=$my_xlib - while :; do - case " $extracted_archives " in - *" $my_xlib_u "*) - func_arith $extracted_serial + 1 - extracted_serial=$func_arith_result - my_xlib_u=lt$extracted_serial-$my_xlib ;; - *) break ;; - esac - done - extracted_archives="$extracted_archives $my_xlib_u" - my_xdir="$my_gentop/$my_xlib_u" - - func_mkdir_p "$my_xdir" - - case $host in - *-darwin*) - func_verbose "Extracting $my_xabs" - # Do not bother doing anything if just a dry run - $opt_dry_run || { - darwin_orig_dir=`pwd` - cd $my_xdir || exit $? - darwin_archive=$my_xabs - darwin_curdir=`pwd` - darwin_base_archive=`basename "$darwin_archive"` - darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true` - if test -n "$darwin_arches"; then - darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'` - darwin_arch= - func_verbose "$darwin_base_archive has multiple architectures $darwin_arches" - for darwin_arch in $darwin_arches ; do - func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}" - $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}" - cd "unfat-$$/${darwin_base_archive}-${darwin_arch}" - func_extract_an_archive "`pwd`" "${darwin_base_archive}" - cd "$darwin_curdir" - $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" - done # $darwin_arches - ## Okay now we've a bunch of thin objects, gotta fatten them up :) - darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u` - darwin_file= - darwin_files= - for darwin_file in $darwin_filelist; do - darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP` - $LIPO -create -output "$darwin_file" $darwin_files - done # $darwin_filelist - $RM -rf unfat-$$ - cd "$darwin_orig_dir" - else - cd $darwin_orig_dir - func_extract_an_archive "$my_xdir" "$my_xabs" - fi # $darwin_arches - } # !$opt_dry_run - ;; - *) - func_extract_an_archive "$my_xdir" "$my_xabs" - ;; - esac - my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP` - done - - func_extract_archives_result="$my_oldobjs" -} - - -# func_emit_wrapper [arg=no] -# -# Emit a libtool wrapper script on stdout. -# Don't directly open a file because we may want to -# incorporate the script contents within a cygwin/mingw -# wrapper executable. Must ONLY be called from within -# func_mode_link because it depends on a number of variables -# set therein. -# -# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR -# variable will take. If 'yes', then the emitted script -# will assume that the directory in which it is stored is -# the $objdir directory. This is a cygwin/mingw-specific -# behavior. -func_emit_wrapper () -{ - func_emit_wrapper_arg1=${1-no} - - $ECHO "\ -#! $SHELL - -# $output - temporary wrapper script for $objdir/$outputname -# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION -# -# The $output program cannot be directly executed until all the libtool -# libraries that it depends on are installed. -# -# This wrapper script should never be moved out of the build directory. -# If it is, it will not operate correctly. - -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -sed_quote_subst='$sed_quote_subst' - -# Be Bourne compatible -if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which - # is contrary to our usage. Disable this feature. - alias -g '\${1+\"\$@\"}'='\"\$@\"' - setopt NO_GLOB_SUBST -else - case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac -fi -BIN_SH=xpg4; export BIN_SH # for Tru64 -DUALCASE=1; export DUALCASE # for MKS sh - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -relink_command=\"$relink_command\" - -# This environment variable determines our operation mode. -if test \"\$libtool_install_magic\" = \"$magic\"; then - # install mode needs the following variables: - generated_by_libtool_version='$macro_version' - notinst_deplibs='$notinst_deplibs' -else - # When we are sourced in execute mode, \$file and \$ECHO are already set. - if test \"\$libtool_execute_magic\" != \"$magic\"; then - file=\"\$0\"" - - qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"` - $ECHO "\ - -# A function that is used when there is no print builtin or printf. -func_fallback_echo () -{ - eval 'cat <<_LTECHO_EOF -\$1 -_LTECHO_EOF' -} - ECHO=\"$qECHO\" - fi - -# Very basic option parsing. These options are (a) specific to -# the libtool wrapper, (b) are identical between the wrapper -# /script/ and the wrapper /executable/ which is used only on -# windows platforms, and (c) all begin with the string "--lt-" -# (application programs are unlikely to have options which match -# this pattern). -# -# There are only two supported options: --lt-debug and -# --lt-dump-script. There is, deliberately, no --lt-help. -# -# The first argument to this parsing function should be the -# script's $0 value, followed by "$@". -lt_option_debug= -func_parse_lt_options () -{ - lt_script_arg0=\$0 - shift - for lt_opt - do - case \"\$lt_opt\" in - --lt-debug) lt_option_debug=1 ;; - --lt-dump-script) - lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\` - test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=. - lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\` - cat \"\$lt_dump_D/\$lt_dump_F\" - exit 0 - ;; - --lt-*) - \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2 - exit 1 - ;; - esac - done - - # Print the debug banner immediately: - if test -n \"\$lt_option_debug\"; then - echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2 - fi -} - -# Used when --lt-debug. Prints its arguments to stdout -# (redirection is the responsibility of the caller) -func_lt_dump_args () -{ - lt_dump_args_N=1; - for lt_arg - do - \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\" - lt_dump_args_N=\`expr \$lt_dump_args_N + 1\` - done -} - -# Core function for launching the target application -func_exec_program_core () -{ -" - case $host in - # Backslashes separate directories on plain windows - *-*-mingw | *-*-os2* | *-cegcc*) - $ECHO "\ - if test -n \"\$lt_option_debug\"; then - \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2 - func_lt_dump_args \${1+\"\$@\"} 1>&2 - fi - exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} -" - ;; - - *) - $ECHO "\ - if test -n \"\$lt_option_debug\"; then - \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2 - func_lt_dump_args \${1+\"\$@\"} 1>&2 - fi - exec \"\$progdir/\$program\" \${1+\"\$@\"} -" - ;; - esac - $ECHO "\ - \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2 - exit 1 -} - -# A function to encapsulate launching the target application -# Strips options in the --lt-* namespace from \$@ and -# launches target application with the remaining arguments. -func_exec_program () -{ - case \" \$* \" in - *\\ --lt-*) - for lt_wr_arg - do - case \$lt_wr_arg in - --lt-*) ;; - *) set x \"\$@\" \"\$lt_wr_arg\"; shift;; - esac - shift - done ;; - esac - func_exec_program_core \${1+\"\$@\"} -} - - # Parse options - func_parse_lt_options \"\$0\" \${1+\"\$@\"} - - # Find the directory that this script lives in. - thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\` - test \"x\$thisdir\" = \"x\$file\" && thisdir=. - - # Follow symbolic links until we get to the real thisdir. - file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\` - while test -n \"\$file\"; do - destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\` - - # If there was a directory component, then change thisdir. - if test \"x\$destdir\" != \"x\$file\"; then - case \"\$destdir\" in - [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; - *) thisdir=\"\$thisdir/\$destdir\" ;; - esac - fi - - file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\` - file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\` - done - - # Usually 'no', except on cygwin/mingw when embedded into - # the cwrapper. - WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1 - if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then - # special case for '.' - if test \"\$thisdir\" = \".\"; then - thisdir=\`pwd\` - fi - # remove .libs from thisdir - case \"\$thisdir\" in - *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;; - $objdir ) thisdir=. ;; - esac - fi - - # Try to get the absolute directory name. - absdir=\`cd \"\$thisdir\" && pwd\` - test -n \"\$absdir\" && thisdir=\"\$absdir\" -" - - if test "$fast_install" = yes; then - $ECHO "\ - program=lt-'$outputname'$exeext - progdir=\"\$thisdir/$objdir\" - - if test ! -f \"\$progdir/\$program\" || - { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ - test \"X\$file\" != \"X\$progdir/\$program\"; }; then - - file=\"\$\$-\$program\" - - if test ! -d \"\$progdir\"; then - $MKDIR \"\$progdir\" - else - $RM \"\$progdir/\$file\" - fi" - - $ECHO "\ - - # relink executable if necessary - if test -n \"\$relink_command\"; then - if relink_command_output=\`eval \$relink_command 2>&1\`; then : - else - $ECHO \"\$relink_command_output\" >&2 - $RM \"\$progdir/\$file\" - exit 1 - fi - fi - - $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || - { $RM \"\$progdir/\$program\"; - $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; } - $RM \"\$progdir/\$file\" - fi" - else - $ECHO "\ - program='$outputname' - progdir=\"\$thisdir/$objdir\" -" - fi - - $ECHO "\ - - if test -f \"\$progdir/\$program\"; then" - - # fixup the dll searchpath if we need to. - # - # Fix the DLL searchpath if we need to. Do this before prepending - # to shlibpath, because on Windows, both are PATH and uninstalled - # libraries must come first. - if test -n "$dllsearchpath"; then - $ECHO "\ - # Add the dll search path components to the executable PATH - PATH=$dllsearchpath:\$PATH -" - fi - - # Export our shlibpath_var if we have one. - if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then - $ECHO "\ - # Add our own library path to $shlibpath_var - $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" - - # Some systems cannot cope with colon-terminated $shlibpath_var - # The second colon is a workaround for a bug in BeOS R4 sed - $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\` - - export $shlibpath_var -" - fi - - $ECHO "\ - if test \"\$libtool_execute_magic\" != \"$magic\"; then - # Run the actual program with our arguments. - func_exec_program \${1+\"\$@\"} - fi - else - # The program doesn't exist. - \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2 - \$ECHO \"This script is just a wrapper for \$program.\" 1>&2 - \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2 - exit 1 - fi -fi\ -" -} - - -# func_emit_cwrapperexe_src -# emit the source code for a wrapper executable on stdout -# Must ONLY be called from within func_mode_link because -# it depends on a number of variable set therein. -func_emit_cwrapperexe_src () -{ - cat < -#include -#ifdef _MSC_VER -# include -# include -# include -#else -# include -# include -# ifdef __CYGWIN__ -# include -# endif -#endif -#include -#include -#include -#include -#include -#include -#include -#include - -/* declarations of non-ANSI functions */ -#if defined(__MINGW32__) -# ifdef __STRICT_ANSI__ -int _putenv (const char *); -# endif -#elif defined(__CYGWIN__) -# ifdef __STRICT_ANSI__ -char *realpath (const char *, char *); -int putenv (char *); -int setenv (const char *, const char *, int); -# endif -/* #elif defined (other platforms) ... */ -#endif - -/* portability defines, excluding path handling macros */ -#if defined(_MSC_VER) -# define setmode _setmode -# define stat _stat -# define chmod _chmod -# define getcwd _getcwd -# define putenv _putenv -# define S_IXUSR _S_IEXEC -# ifndef _INTPTR_T_DEFINED -# define _INTPTR_T_DEFINED -# define intptr_t int -# endif -#elif defined(__MINGW32__) -# define setmode _setmode -# define stat _stat -# define chmod _chmod -# define getcwd _getcwd -# define putenv _putenv -#elif defined(__CYGWIN__) -# define HAVE_SETENV -# define FOPEN_WB "wb" -/* #elif defined (other platforms) ... */ -#endif - -#if defined(PATH_MAX) -# define LT_PATHMAX PATH_MAX -#elif defined(MAXPATHLEN) -# define LT_PATHMAX MAXPATHLEN -#else -# define LT_PATHMAX 1024 -#endif - -#ifndef S_IXOTH -# define S_IXOTH 0 -#endif -#ifndef S_IXGRP -# define S_IXGRP 0 -#endif - -/* path handling portability macros */ -#ifndef DIR_SEPARATOR -# define DIR_SEPARATOR '/' -# define PATH_SEPARATOR ':' -#endif - -#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \ - defined (__OS2__) -# define HAVE_DOS_BASED_FILE_SYSTEM -# define FOPEN_WB "wb" -# ifndef DIR_SEPARATOR_2 -# define DIR_SEPARATOR_2 '\\' -# endif -# ifndef PATH_SEPARATOR_2 -# define PATH_SEPARATOR_2 ';' -# endif -#endif - -#ifndef DIR_SEPARATOR_2 -# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR) -#else /* DIR_SEPARATOR_2 */ -# define IS_DIR_SEPARATOR(ch) \ - (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) -#endif /* DIR_SEPARATOR_2 */ - -#ifndef PATH_SEPARATOR_2 -# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR) -#else /* PATH_SEPARATOR_2 */ -# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2) -#endif /* PATH_SEPARATOR_2 */ - -#ifndef FOPEN_WB -# define FOPEN_WB "w" -#endif -#ifndef _O_BINARY -# define _O_BINARY 0 -#endif - -#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) -#define XFREE(stale) do { \ - if (stale) { free ((void *) stale); stale = 0; } \ -} while (0) - -#if defined(LT_DEBUGWRAPPER) -static int lt_debug = 1; -#else -static int lt_debug = 0; -#endif - -const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */ - -void *xmalloc (size_t num); -char *xstrdup (const char *string); -const char *base_name (const char *name); -char *find_executable (const char *wrapper); -char *chase_symlinks (const char *pathspec); -int make_executable (const char *path); -int check_executable (const char *path); -char *strendzap (char *str, const char *pat); -void lt_debugprintf (const char *file, int line, const char *fmt, ...); -void lt_fatal (const char *file, int line, const char *message, ...); -static const char *nonnull (const char *s); -static const char *nonempty (const char *s); -void lt_setenv (const char *name, const char *value); -char *lt_extend_str (const char *orig_value, const char *add, int to_end); -void lt_update_exe_path (const char *name, const char *value); -void lt_update_lib_path (const char *name, const char *value); -char **prepare_spawn (char **argv); -void lt_dump_script (FILE *f); -EOF - - cat <= 0) - && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH))) - return 1; - else - return 0; -} - -int -make_executable (const char *path) -{ - int rval = 0; - struct stat st; - - lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n", - nonempty (path)); - if ((!path) || (!*path)) - return 0; - - if (stat (path, &st) >= 0) - { - rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR); - } - return rval; -} - -/* Searches for the full path of the wrapper. Returns - newly allocated full path name if found, NULL otherwise - Does not chase symlinks, even on platforms that support them. -*/ -char * -find_executable (const char *wrapper) -{ - int has_slash = 0; - const char *p; - const char *p_next; - /* static buffer for getcwd */ - char tmp[LT_PATHMAX + 1]; - int tmp_len; - char *concat_name; - - lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n", - nonempty (wrapper)); - - if ((wrapper == NULL) || (*wrapper == '\0')) - return NULL; - - /* Absolute path? */ -#if defined (HAVE_DOS_BASED_FILE_SYSTEM) - if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':') - { - concat_name = xstrdup (wrapper); - if (check_executable (concat_name)) - return concat_name; - XFREE (concat_name); - } - else - { -#endif - if (IS_DIR_SEPARATOR (wrapper[0])) - { - concat_name = xstrdup (wrapper); - if (check_executable (concat_name)) - return concat_name; - XFREE (concat_name); - } -#if defined (HAVE_DOS_BASED_FILE_SYSTEM) - } -#endif - - for (p = wrapper; *p; p++) - if (*p == '/') - { - has_slash = 1; - break; - } - if (!has_slash) - { - /* no slashes; search PATH */ - const char *path = getenv ("PATH"); - if (path != NULL) - { - for (p = path; *p; p = p_next) - { - const char *q; - size_t p_len; - for (q = p; *q; q++) - if (IS_PATH_SEPARATOR (*q)) - break; - p_len = q - p; - p_next = (*q == '\0' ? q : q + 1); - if (p_len == 0) - { - /* empty path: current directory */ - if (getcwd (tmp, LT_PATHMAX) == NULL) - lt_fatal (__FILE__, __LINE__, "getcwd failed: %s", - nonnull (strerror (errno))); - tmp_len = strlen (tmp); - concat_name = - XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); - memcpy (concat_name, tmp, tmp_len); - concat_name[tmp_len] = '/'; - strcpy (concat_name + tmp_len + 1, wrapper); - } - else - { - concat_name = - XMALLOC (char, p_len + 1 + strlen (wrapper) + 1); - memcpy (concat_name, p, p_len); - concat_name[p_len] = '/'; - strcpy (concat_name + p_len + 1, wrapper); - } - if (check_executable (concat_name)) - return concat_name; - XFREE (concat_name); - } - } - /* not found in PATH; assume curdir */ - } - /* Relative path | not found in path: prepend cwd */ - if (getcwd (tmp, LT_PATHMAX) == NULL) - lt_fatal (__FILE__, __LINE__, "getcwd failed: %s", - nonnull (strerror (errno))); - tmp_len = strlen (tmp); - concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); - memcpy (concat_name, tmp, tmp_len); - concat_name[tmp_len] = '/'; - strcpy (concat_name + tmp_len + 1, wrapper); - - if (check_executable (concat_name)) - return concat_name; - XFREE (concat_name); - return NULL; -} - -char * -chase_symlinks (const char *pathspec) -{ -#ifndef S_ISLNK - return xstrdup (pathspec); -#else - char buf[LT_PATHMAX]; - struct stat s; - char *tmp_pathspec = xstrdup (pathspec); - char *p; - int has_symlinks = 0; - while (strlen (tmp_pathspec) && !has_symlinks) - { - lt_debugprintf (__FILE__, __LINE__, - "checking path component for symlinks: %s\n", - tmp_pathspec); - if (lstat (tmp_pathspec, &s) == 0) - { - if (S_ISLNK (s.st_mode) != 0) - { - has_symlinks = 1; - break; - } - - /* search backwards for last DIR_SEPARATOR */ - p = tmp_pathspec + strlen (tmp_pathspec) - 1; - while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) - p--; - if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) - { - /* no more DIR_SEPARATORS left */ - break; - } - *p = '\0'; - } - else - { - lt_fatal (__FILE__, __LINE__, - "error accessing file \"%s\": %s", - tmp_pathspec, nonnull (strerror (errno))); - } - } - XFREE (tmp_pathspec); - - if (!has_symlinks) - { - return xstrdup (pathspec); - } - - tmp_pathspec = realpath (pathspec, buf); - if (tmp_pathspec == 0) - { - lt_fatal (__FILE__, __LINE__, - "could not follow symlinks for %s", pathspec); - } - return xstrdup (tmp_pathspec); -#endif -} - -char * -strendzap (char *str, const char *pat) -{ - size_t len, patlen; - - assert (str != NULL); - assert (pat != NULL); - - len = strlen (str); - patlen = strlen (pat); - - if (patlen <= len) - { - str += len - patlen; - if (strcmp (str, pat) == 0) - *str = '\0'; - } - return str; -} - -void -lt_debugprintf (const char *file, int line, const char *fmt, ...) -{ - va_list args; - if (lt_debug) - { - (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line); - va_start (args, fmt); - (void) vfprintf (stderr, fmt, args); - va_end (args); - } -} - -static void -lt_error_core (int exit_status, const char *file, - int line, const char *mode, - const char *message, va_list ap) -{ - fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode); - vfprintf (stderr, message, ap); - fprintf (stderr, ".\n"); - - if (exit_status >= 0) - exit (exit_status); -} - -void -lt_fatal (const char *file, int line, const char *message, ...) -{ - va_list ap; - va_start (ap, message); - lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap); - va_end (ap); -} - -static const char * -nonnull (const char *s) -{ - return s ? s : "(null)"; -} - -static const char * -nonempty (const char *s) -{ - return (s && !*s) ? "(empty)" : nonnull (s); -} - -void -lt_setenv (const char *name, const char *value) -{ - lt_debugprintf (__FILE__, __LINE__, - "(lt_setenv) setting '%s' to '%s'\n", - nonnull (name), nonnull (value)); - { -#ifdef HAVE_SETENV - /* always make a copy, for consistency with !HAVE_SETENV */ - char *str = xstrdup (value); - setenv (name, str, 1); -#else - int len = strlen (name) + 1 + strlen (value) + 1; - char *str = XMALLOC (char, len); - sprintf (str, "%s=%s", name, value); - if (putenv (str) != EXIT_SUCCESS) - { - XFREE (str); - } -#endif - } -} - -char * -lt_extend_str (const char *orig_value, const char *add, int to_end) -{ - char *new_value; - if (orig_value && *orig_value) - { - int orig_value_len = strlen (orig_value); - int add_len = strlen (add); - new_value = XMALLOC (char, add_len + orig_value_len + 1); - if (to_end) - { - strcpy (new_value, orig_value); - strcpy (new_value + orig_value_len, add); - } - else - { - strcpy (new_value, add); - strcpy (new_value + add_len, orig_value); - } - } - else - { - new_value = xstrdup (add); - } - return new_value; -} - -void -lt_update_exe_path (const char *name, const char *value) -{ - lt_debugprintf (__FILE__, __LINE__, - "(lt_update_exe_path) modifying '%s' by prepending '%s'\n", - nonnull (name), nonnull (value)); - - if (name && *name && value && *value) - { - char *new_value = lt_extend_str (getenv (name), value, 0); - /* some systems can't cope with a ':'-terminated path #' */ - int len = strlen (new_value); - while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1])) - { - new_value[len-1] = '\0'; - } - lt_setenv (name, new_value); - XFREE (new_value); - } -} - -void -lt_update_lib_path (const char *name, const char *value) -{ - lt_debugprintf (__FILE__, __LINE__, - "(lt_update_lib_path) modifying '%s' by prepending '%s'\n", - nonnull (name), nonnull (value)); - - if (name && *name && value && *value) - { - char *new_value = lt_extend_str (getenv (name), value, 0); - lt_setenv (name, new_value); - XFREE (new_value); - } -} - -EOF - case $host_os in - mingw*) - cat <<"EOF" - -/* Prepares an argument vector before calling spawn(). - Note that spawn() does not by itself call the command interpreter - (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") : - ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO); - GetVersionEx(&v); - v.dwPlatformId == VER_PLATFORM_WIN32_NT; - }) ? "cmd.exe" : "command.com"). - Instead it simply concatenates the arguments, separated by ' ', and calls - CreateProcess(). We must quote the arguments since Win32 CreateProcess() - interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a - special way: - - Space and tab are interpreted as delimiters. They are not treated as - delimiters if they are surrounded by double quotes: "...". - - Unescaped double quotes are removed from the input. Their only effect is - that within double quotes, space and tab are treated like normal - characters. - - Backslashes not followed by double quotes are not special. - - But 2*n+1 backslashes followed by a double quote become - n backslashes followed by a double quote (n >= 0): - \" -> " - \\\" -> \" - \\\\\" -> \\" - */ -#define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037" -#define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037" -char ** -prepare_spawn (char **argv) -{ - size_t argc; - char **new_argv; - size_t i; - - /* Count number of arguments. */ - for (argc = 0; argv[argc] != NULL; argc++) - ; - - /* Allocate new argument vector. */ - new_argv = XMALLOC (char *, argc + 1); - - /* Put quoted arguments into the new argument vector. */ - for (i = 0; i < argc; i++) - { - const char *string = argv[i]; - - if (string[0] == '\0') - new_argv[i] = xstrdup ("\"\""); - else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL) - { - int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL); - size_t length; - unsigned int backslashes; - const char *s; - char *quoted_string; - char *p; - - length = 0; - backslashes = 0; - if (quote_around) - length++; - for (s = string; *s != '\0'; s++) - { - char c = *s; - if (c == '"') - length += backslashes + 1; - length++; - if (c == '\\') - backslashes++; - else - backslashes = 0; - } - if (quote_around) - length += backslashes + 1; - - quoted_string = XMALLOC (char, length + 1); - - p = quoted_string; - backslashes = 0; - if (quote_around) - *p++ = '"'; - for (s = string; *s != '\0'; s++) - { - char c = *s; - if (c == '"') - { - unsigned int j; - for (j = backslashes + 1; j > 0; j--) - *p++ = '\\'; - } - *p++ = c; - if (c == '\\') - backslashes++; - else - backslashes = 0; - } - if (quote_around) - { - unsigned int j; - for (j = backslashes; j > 0; j--) - *p++ = '\\'; - *p++ = '"'; - } - *p = '\0'; - - new_argv[i] = quoted_string; - } - else - new_argv[i] = (char *) string; - } - new_argv[argc] = NULL; - - return new_argv; -} -EOF - ;; - esac - - cat <<"EOF" -void lt_dump_script (FILE* f) -{ -EOF - func_emit_wrapper yes | - $SED -n -e ' -s/^\(.\{79\}\)\(..*\)/\1\ -\2/ -h -s/\([\\"]\)/\\\1/g -s/$/\\n/ -s/\([^\n]*\).*/ fputs ("\1", f);/p -g -D' - cat <<"EOF" -} -EOF -} -# end: func_emit_cwrapperexe_src - -# func_win32_import_lib_p ARG -# True if ARG is an import lib, as indicated by $file_magic_cmd -func_win32_import_lib_p () -{ - $opt_debug - case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in - *import*) : ;; - *) false ;; - esac -} - -# func_mode_link arg... -func_mode_link () -{ - $opt_debug - case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) - # It is impossible to link a dll without this setting, and - # we shouldn't force the makefile maintainer to figure out - # which system we are compiling for in order to pass an extra - # flag for every libtool invocation. - # allow_undefined=no - - # FIXME: Unfortunately, there are problems with the above when trying - # to make a dll which has undefined symbols, in which case not - # even a static library is built. For now, we need to specify - # -no-undefined on the libtool link line when we can be certain - # that all symbols are satisfied, otherwise we get a static library. - allow_undefined=yes - ;; - *) - allow_undefined=yes - ;; - esac - libtool_args=$nonopt - base_compile="$nonopt $@" - compile_command=$nonopt - finalize_command=$nonopt - - compile_rpath= - finalize_rpath= - compile_shlibpath= - finalize_shlibpath= - convenience= - old_convenience= - deplibs= - old_deplibs= - compiler_flags= - linker_flags= - dllsearchpath= - lib_search_path=`pwd` - inst_prefix_dir= - new_inherited_linker_flags= - - avoid_version=no - bindir= - dlfiles= - dlprefiles= - dlself=no - export_dynamic=no - export_symbols= - export_symbols_regex= - generated= - libobjs= - ltlibs= - module=no - no_install=no - objs= - non_pic_objects= - precious_files_regex= - prefer_static_libs=no - preload=no - prev= - prevarg= - release= - rpath= - xrpath= - perm_rpath= - temp_rpath= - thread_safe=no - vinfo= - vinfo_number=no - weak_libs= - single_module="${wl}-single_module" - func_infer_tag $base_compile - - # We need to know -static, to get the right output filenames. - for arg - do - case $arg in - -shared) - test "$build_libtool_libs" != yes && \ - func_fatal_configuration "can not build a shared library" - build_old_libs=no - break - ;; - -all-static | -static | -static-libtool-libs) - case $arg in - -all-static) - if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then - func_warning "complete static linking is impossible in this configuration" - fi - if test -n "$link_static_flag"; then - dlopen_self=$dlopen_self_static - fi - prefer_static_libs=yes - ;; - -static) - if test -z "$pic_flag" && test -n "$link_static_flag"; then - dlopen_self=$dlopen_self_static - fi - prefer_static_libs=built - ;; - -static-libtool-libs) - if test -z "$pic_flag" && test -n "$link_static_flag"; then - dlopen_self=$dlopen_self_static - fi - prefer_static_libs=yes - ;; - esac - build_libtool_libs=no - build_old_libs=yes - break - ;; - esac - done - - # See if our shared archives depend on static archives. - test -n "$old_archive_from_new_cmds" && build_old_libs=yes - - # Go through the arguments, transforming them on the way. - while test "$#" -gt 0; do - arg="$1" - shift - func_quote_for_eval "$arg" - qarg=$func_quote_for_eval_unquoted_result - func_append libtool_args " $func_quote_for_eval_result" - - # If the previous option needs an argument, assign it. - if test -n "$prev"; then - case $prev in - output) - func_append compile_command " @OUTPUT@" - func_append finalize_command " @OUTPUT@" - ;; - esac - - case $prev in - bindir) - bindir="$arg" - prev= - continue - ;; - dlfiles|dlprefiles) - if test "$preload" = no; then - # Add the symbol object into the linking commands. - func_append compile_command " @SYMFILE@" - func_append finalize_command " @SYMFILE@" - preload=yes - fi - case $arg in - *.la | *.lo) ;; # We handle these cases below. - force) - if test "$dlself" = no; then - dlself=needless - export_dynamic=yes - fi - prev= - continue - ;; - self) - if test "$prev" = dlprefiles; then - dlself=yes - elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then - dlself=yes - else - dlself=needless - export_dynamic=yes - fi - prev= - continue - ;; - *) - if test "$prev" = dlfiles; then - func_append dlfiles " $arg" - else - func_append dlprefiles " $arg" - fi - prev= - continue - ;; - esac - ;; - expsyms) - export_symbols="$arg" - test -f "$arg" \ - || func_fatal_error "symbol file \`$arg' does not exist" - prev= - continue - ;; - expsyms_regex) - export_symbols_regex="$arg" - prev= - continue - ;; - framework) - case $host in - *-*-darwin*) - case "$deplibs " in - *" $qarg.ltframework "*) ;; - *) func_append deplibs " $qarg.ltframework" # this is fixed later - ;; - esac - ;; - esac - prev= - continue - ;; - inst_prefix) - inst_prefix_dir="$arg" - prev= - continue - ;; - objectlist) - if test -f "$arg"; then - save_arg=$arg - moreargs= - for fil in `cat "$save_arg"` - do -# func_append moreargs " $fil" - arg=$fil - # A libtool-controlled object. - - # Check to see that this really is a libtool object. - if func_lalib_unsafe_p "$arg"; then - pic_object= - non_pic_object= - - # Read the .lo file - func_source "$arg" - - if test -z "$pic_object" || - test -z "$non_pic_object" || - test "$pic_object" = none && - test "$non_pic_object" = none; then - func_fatal_error "cannot find name of object for \`$arg'" - fi - - # Extract subdirectory from the argument. - func_dirname "$arg" "/" "" - xdir="$func_dirname_result" - - if test "$pic_object" != none; then - # Prepend the subdirectory the object is found in. - pic_object="$xdir$pic_object" - - if test "$prev" = dlfiles; then - if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then - func_append dlfiles " $pic_object" - prev= - continue - else - # If libtool objects are unsupported, then we need to preload. - prev=dlprefiles - fi - fi - - # CHECK ME: I think I busted this. -Ossama - if test "$prev" = dlprefiles; then - # Preload the old-style object. - func_append dlprefiles " $pic_object" - prev= - fi - - # A PIC object. - func_append libobjs " $pic_object" - arg="$pic_object" - fi - - # Non-PIC object. - if test "$non_pic_object" != none; then - # Prepend the subdirectory the object is found in. - non_pic_object="$xdir$non_pic_object" - - # A standard non-PIC object - func_append non_pic_objects " $non_pic_object" - if test -z "$pic_object" || test "$pic_object" = none ; then - arg="$non_pic_object" - fi - else - # If the PIC object exists, use it instead. - # $xdir was prepended to $pic_object above. - non_pic_object="$pic_object" - func_append non_pic_objects " $non_pic_object" - fi - else - # Only an error if not doing a dry-run. - if $opt_dry_run; then - # Extract subdirectory from the argument. - func_dirname "$arg" "/" "" - xdir="$func_dirname_result" - - func_lo2o "$arg" - pic_object=$xdir$objdir/$func_lo2o_result - non_pic_object=$xdir$func_lo2o_result - func_append libobjs " $pic_object" - func_append non_pic_objects " $non_pic_object" - else - func_fatal_error "\`$arg' is not a valid libtool object" - fi - fi - done - else - func_fatal_error "link input file \`$arg' does not exist" - fi - arg=$save_arg - prev= - continue - ;; - precious_regex) - precious_files_regex="$arg" - prev= - continue - ;; - release) - release="-$arg" - prev= - continue - ;; - rpath | xrpath) - # We need an absolute path. - case $arg in - [\\/]* | [A-Za-z]:[\\/]*) ;; - *) - func_fatal_error "only absolute run-paths are allowed" - ;; - esac - if test "$prev" = rpath; then - case "$rpath " in - *" $arg "*) ;; - *) func_append rpath " $arg" ;; - esac - else - case "$xrpath " in - *" $arg "*) ;; - *) func_append xrpath " $arg" ;; - esac - fi - prev= - continue - ;; - shrext) - shrext_cmds="$arg" - prev= - continue - ;; - weak) - func_append weak_libs " $arg" - prev= - continue - ;; - xcclinker) - func_append linker_flags " $qarg" - func_append compiler_flags " $qarg" - prev= - func_append compile_command " $qarg" - func_append finalize_command " $qarg" - continue - ;; - xcompiler) - func_append compiler_flags " $qarg" - prev= - func_append compile_command " $qarg" - func_append finalize_command " $qarg" - continue - ;; - xlinker) - func_append linker_flags " $qarg" - func_append compiler_flags " $wl$qarg" - prev= - func_append compile_command " $wl$qarg" - func_append finalize_command " $wl$qarg" - continue - ;; - *) - eval "$prev=\"\$arg\"" - prev= - continue - ;; - esac - fi # test -n "$prev" - - prevarg="$arg" - - case $arg in - -all-static) - if test -n "$link_static_flag"; then - # See comment for -static flag below, for more details. - func_append compile_command " $link_static_flag" - func_append finalize_command " $link_static_flag" - fi - continue - ;; - - -allow-undefined) - # FIXME: remove this flag sometime in the future. - func_fatal_error "\`-allow-undefined' must not be used because it is the default" - ;; - - -avoid-version) - avoid_version=yes - continue - ;; - - -bindir) - prev=bindir - continue - ;; - - -dlopen) - prev=dlfiles - continue - ;; - - -dlpreopen) - prev=dlprefiles - continue - ;; - - -export-dynamic) - export_dynamic=yes - continue - ;; - - -export-symbols | -export-symbols-regex) - if test -n "$export_symbols" || test -n "$export_symbols_regex"; then - func_fatal_error "more than one -exported-symbols argument is not allowed" - fi - if test "X$arg" = "X-export-symbols"; then - prev=expsyms - else - prev=expsyms_regex - fi - continue - ;; - - -framework) - prev=framework - continue - ;; - - -inst-prefix-dir) - prev=inst_prefix - continue - ;; - - # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* - # so, if we see these flags be careful not to treat them like -L - -L[A-Z][A-Z]*:*) - case $with_gcc/$host in - no/*-*-irix* | /*-*-irix*) - func_append compile_command " $arg" - func_append finalize_command " $arg" - ;; - esac - continue - ;; - - -L*) - func_stripname "-L" '' "$arg" - if test -z "$func_stripname_result"; then - if test "$#" -gt 0; then - func_fatal_error "require no space between \`-L' and \`$1'" - else - func_fatal_error "need path for \`-L' option" - fi - fi - func_resolve_sysroot "$func_stripname_result" - dir=$func_resolve_sysroot_result - # We need an absolute path. - case $dir in - [\\/]* | [A-Za-z]:[\\/]*) ;; - *) - absdir=`cd "$dir" && pwd` - test -z "$absdir" && \ - func_fatal_error "cannot determine absolute directory name of \`$dir'" - dir="$absdir" - ;; - esac - case "$deplibs " in - *" -L$dir "* | *" $arg "*) - # Will only happen for absolute or sysroot arguments - ;; - *) - # Preserve sysroot, but never include relative directories - case $dir in - [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;; - *) func_append deplibs " -L$dir" ;; - esac - func_append lib_search_path " $dir" - ;; - esac - case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) - testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'` - case :$dllsearchpath: in - *":$dir:"*) ;; - ::) dllsearchpath=$dir;; - *) func_append dllsearchpath ":$dir";; - esac - case :$dllsearchpath: in - *":$testbindir:"*) ;; - ::) dllsearchpath=$testbindir;; - *) func_append dllsearchpath ":$testbindir";; - esac - ;; - esac - continue - ;; - - -l*) - if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then - case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*) - # These systems don't actually have a C or math library (as such) - continue - ;; - *-*-os2*) - # These systems don't actually have a C library (as such) - test "X$arg" = "X-lc" && continue - ;; - *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) - # Do not include libc due to us having libc/libc_r. - test "X$arg" = "X-lc" && continue - ;; - *-*-rhapsody* | *-*-darwin1.[012]) - # Rhapsody C and math libraries are in the System framework - func_append deplibs " System.ltframework" - continue - ;; - *-*-sco3.2v5* | *-*-sco5v6*) - # Causes problems with __ctype - test "X$arg" = "X-lc" && continue - ;; - *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) - # Compiler inserts libc in the correct place for threads to work - test "X$arg" = "X-lc" && continue - ;; - esac - elif test "X$arg" = "X-lc_r"; then - case $host in - *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) - # Do not include libc_r directly, use -pthread flag. - continue - ;; - esac - fi - func_append deplibs " $arg" - continue - ;; - - -module) - module=yes - continue - ;; - - # Tru64 UNIX uses -model [arg] to determine the layout of C++ - # classes, name mangling, and exception handling. - # Darwin uses the -arch flag to determine output architecture. - -model|-arch|-isysroot|--sysroot) - func_append compiler_flags " $arg" - func_append compile_command " $arg" - func_append finalize_command " $arg" - prev=xcompiler - continue - ;; - - -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \ - |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*) - func_append compiler_flags " $arg" - func_append compile_command " $arg" - func_append finalize_command " $arg" - case "$new_inherited_linker_flags " in - *" $arg "*) ;; - * ) func_append new_inherited_linker_flags " $arg" ;; - esac - continue - ;; - - -multi_module) - single_module="${wl}-multi_module" - continue - ;; - - -no-fast-install) - fast_install=no - continue - ;; - - -no-install) - case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*) - # The PATH hackery in wrapper scripts is required on Windows - # and Darwin in order for the loader to find any dlls it needs. - func_warning "\`-no-install' is ignored for $host" - func_warning "assuming \`-no-fast-install' instead" - fast_install=no - ;; - *) no_install=yes ;; - esac - continue - ;; - - -no-undefined) - allow_undefined=no - continue - ;; - - -objectlist) - prev=objectlist - continue - ;; - - -o) prev=output ;; - - -precious-files-regex) - prev=precious_regex - continue - ;; - - -release) - prev=release - continue - ;; - - -rpath) - prev=rpath - continue - ;; - - -R) - prev=xrpath - continue - ;; - - -R*) - func_stripname '-R' '' "$arg" - dir=$func_stripname_result - # We need an absolute path. - case $dir in - [\\/]* | [A-Za-z]:[\\/]*) ;; - =*) - func_stripname '=' '' "$dir" - dir=$lt_sysroot$func_stripname_result - ;; - *) - func_fatal_error "only absolute run-paths are allowed" - ;; - esac - case "$xrpath " in - *" $dir "*) ;; - *) func_append xrpath " $dir" ;; - esac - continue - ;; - - -shared) - # The effects of -shared are defined in a previous loop. - continue - ;; - - -shrext) - prev=shrext - continue - ;; - - -static | -static-libtool-libs) - # The effects of -static are defined in a previous loop. - # We used to do the same as -all-static on platforms that - # didn't have a PIC flag, but the assumption that the effects - # would be equivalent was wrong. It would break on at least - # Digital Unix and AIX. - continue - ;; - - -thread-safe) - thread_safe=yes - continue - ;; - - -version-info) - prev=vinfo - continue - ;; - - -version-number) - prev=vinfo - vinfo_number=yes - continue - ;; - - -weak) - prev=weak - continue - ;; - - -Wc,*) - func_stripname '-Wc,' '' "$arg" - args=$func_stripname_result - arg= - save_ifs="$IFS"; IFS=',' - for flag in $args; do - IFS="$save_ifs" - func_quote_for_eval "$flag" - func_append arg " $func_quote_for_eval_result" - func_append compiler_flags " $func_quote_for_eval_result" - done - IFS="$save_ifs" - func_stripname ' ' '' "$arg" - arg=$func_stripname_result - ;; - - -Wl,*) - func_stripname '-Wl,' '' "$arg" - args=$func_stripname_result - arg= - save_ifs="$IFS"; IFS=',' - for flag in $args; do - IFS="$save_ifs" - func_quote_for_eval "$flag" - func_append arg " $wl$func_quote_for_eval_result" - func_append compiler_flags " $wl$func_quote_for_eval_result" - func_append linker_flags " $func_quote_for_eval_result" - done - IFS="$save_ifs" - func_stripname ' ' '' "$arg" - arg=$func_stripname_result - ;; - - -Xcompiler) - prev=xcompiler - continue - ;; - - -Xlinker) - prev=xlinker - continue - ;; - - -XCClinker) - prev=xcclinker - continue - ;; - - # -msg_* for osf cc - -msg_*) - func_quote_for_eval "$arg" - arg="$func_quote_for_eval_result" - ;; - - # Flags to be passed through unchanged, with rationale: - # -64, -mips[0-9] enable 64-bit mode for the SGI compiler - # -r[0-9][0-9]* specify processor for the SGI compiler - # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler - # +DA*, +DD* enable 64-bit mode for the HP compiler - # -q* compiler args for the IBM compiler - # -m*, -t[45]*, -txscale* architecture-specific flags for GCC - # -F/path path to uninstalled frameworks, gcc on darwin - # -p, -pg, --coverage, -fprofile-* profiling flags for GCC - # @file GCC response files - # -tp=* Portland pgcc target processor selection - # --sysroot=* for sysroot support - # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization - -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \ - -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \ - -O*|-flto*|-fwhopr*|-fuse-linker-plugin) - func_quote_for_eval "$arg" - arg="$func_quote_for_eval_result" - func_append compile_command " $arg" - func_append finalize_command " $arg" - func_append compiler_flags " $arg" - continue - ;; - - # Some other compiler flag. - -* | +*) - func_quote_for_eval "$arg" - arg="$func_quote_for_eval_result" - ;; - - *.$objext) - # A standard object. - func_append objs " $arg" - ;; - - *.lo) - # A libtool-controlled object. - - # Check to see that this really is a libtool object. - if func_lalib_unsafe_p "$arg"; then - pic_object= - non_pic_object= - - # Read the .lo file - func_source "$arg" - - if test -z "$pic_object" || - test -z "$non_pic_object" || - test "$pic_object" = none && - test "$non_pic_object" = none; then - func_fatal_error "cannot find name of object for \`$arg'" - fi - - # Extract subdirectory from the argument. - func_dirname "$arg" "/" "" - xdir="$func_dirname_result" - - if test "$pic_object" != none; then - # Prepend the subdirectory the object is found in. - pic_object="$xdir$pic_object" - - if test "$prev" = dlfiles; then - if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then - func_append dlfiles " $pic_object" - prev= - continue - else - # If libtool objects are unsupported, then we need to preload. - prev=dlprefiles - fi - fi - - # CHECK ME: I think I busted this. -Ossama - if test "$prev" = dlprefiles; then - # Preload the old-style object. - func_append dlprefiles " $pic_object" - prev= - fi - - # A PIC object. - func_append libobjs " $pic_object" - arg="$pic_object" - fi - - # Non-PIC object. - if test "$non_pic_object" != none; then - # Prepend the subdirectory the object is found in. - non_pic_object="$xdir$non_pic_object" - - # A standard non-PIC object - func_append non_pic_objects " $non_pic_object" - if test -z "$pic_object" || test "$pic_object" = none ; then - arg="$non_pic_object" - fi - else - # If the PIC object exists, use it instead. - # $xdir was prepended to $pic_object above. - non_pic_object="$pic_object" - func_append non_pic_objects " $non_pic_object" - fi - else - # Only an error if not doing a dry-run. - if $opt_dry_run; then - # Extract subdirectory from the argument. - func_dirname "$arg" "/" "" - xdir="$func_dirname_result" - - func_lo2o "$arg" - pic_object=$xdir$objdir/$func_lo2o_result - non_pic_object=$xdir$func_lo2o_result - func_append libobjs " $pic_object" - func_append non_pic_objects " $non_pic_object" - else - func_fatal_error "\`$arg' is not a valid libtool object" - fi - fi - ;; - - *.$libext) - # An archive. - func_append deplibs " $arg" - func_append old_deplibs " $arg" - continue - ;; - - *.la) - # A libtool-controlled library. - - func_resolve_sysroot "$arg" - if test "$prev" = dlfiles; then - # This library was specified with -dlopen. - func_append dlfiles " $func_resolve_sysroot_result" - prev= - elif test "$prev" = dlprefiles; then - # The library was specified with -dlpreopen. - func_append dlprefiles " $func_resolve_sysroot_result" - prev= - else - func_append deplibs " $func_resolve_sysroot_result" - fi - continue - ;; - - # Some other compiler argument. - *) - # Unknown arguments in both finalize_command and compile_command need - # to be aesthetically quoted because they are evaled later. - func_quote_for_eval "$arg" - arg="$func_quote_for_eval_result" - ;; - esac # arg - - # Now actually substitute the argument into the commands. - if test -n "$arg"; then - func_append compile_command " $arg" - func_append finalize_command " $arg" - fi - done # argument parsing loop - - test -n "$prev" && \ - func_fatal_help "the \`$prevarg' option requires an argument" - - if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then - eval arg=\"$export_dynamic_flag_spec\" - func_append compile_command " $arg" - func_append finalize_command " $arg" - fi - - oldlibs= - # calculate the name of the file, without its directory - func_basename "$output" - outputname="$func_basename_result" - libobjs_save="$libobjs" - - if test -n "$shlibpath_var"; then - # get the directories listed in $shlibpath_var - eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\` - else - shlib_search_path= - fi - eval sys_lib_search_path=\"$sys_lib_search_path_spec\" - eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" - - func_dirname "$output" "/" "" - output_objdir="$func_dirname_result$objdir" - func_to_tool_file "$output_objdir/" - tool_output_objdir=$func_to_tool_file_result - # Create the object directory. - func_mkdir_p "$output_objdir" - - # Determine the type of output - case $output in - "") - func_fatal_help "you must specify an output file" - ;; - *.$libext) linkmode=oldlib ;; - *.lo | *.$objext) linkmode=obj ;; - *.la) linkmode=lib ;; - *) linkmode=prog ;; # Anything else should be a program. - esac - - specialdeplibs= - - libs= - # Find all interdependent deplibs by searching for libraries - # that are linked more than once (e.g. -la -lb -la) - for deplib in $deplibs; do - if $opt_preserve_dup_deps ; then - case "$libs " in - *" $deplib "*) func_append specialdeplibs " $deplib" ;; - esac - fi - func_append libs " $deplib" - done - - if test "$linkmode" = lib; then - libs="$predeps $libs $compiler_lib_search_path $postdeps" - - # Compute libraries that are listed more than once in $predeps - # $postdeps and mark them as special (i.e., whose duplicates are - # not to be eliminated). - pre_post_deps= - if $opt_duplicate_compiler_generated_deps; then - for pre_post_dep in $predeps $postdeps; do - case "$pre_post_deps " in - *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;; - esac - func_append pre_post_deps " $pre_post_dep" - done - fi - pre_post_deps= - fi - - deplibs= - newdependency_libs= - newlib_search_path= - need_relink=no # whether we're linking any uninstalled libtool libraries - notinst_deplibs= # not-installed libtool libraries - notinst_path= # paths that contain not-installed libtool libraries - - case $linkmode in - lib) - passes="conv dlpreopen link" - for file in $dlfiles $dlprefiles; do - case $file in - *.la) ;; - *) - func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file" - ;; - esac - done - ;; - prog) - compile_deplibs= - finalize_deplibs= - alldeplibs=no - newdlfiles= - newdlprefiles= - passes="conv scan dlopen dlpreopen link" - ;; - *) passes="conv" - ;; - esac - - for pass in $passes; do - # The preopen pass in lib mode reverses $deplibs; put it back here - # so that -L comes before libs that need it for instance... - if test "$linkmode,$pass" = "lib,link"; then - ## FIXME: Find the place where the list is rebuilt in the wrong - ## order, and fix it there properly - tmp_deplibs= - for deplib in $deplibs; do - tmp_deplibs="$deplib $tmp_deplibs" - done - deplibs="$tmp_deplibs" - fi - - if test "$linkmode,$pass" = "lib,link" || - test "$linkmode,$pass" = "prog,scan"; then - libs="$deplibs" - deplibs= - fi - if test "$linkmode" = prog; then - case $pass in - dlopen) libs="$dlfiles" ;; - dlpreopen) libs="$dlprefiles" ;; - link) libs="$deplibs %DEPLIBS% $dependency_libs" ;; - esac - fi - if test "$linkmode,$pass" = "lib,dlpreopen"; then - # Collect and forward deplibs of preopened libtool libs - for lib in $dlprefiles; do - # Ignore non-libtool-libs - dependency_libs= - func_resolve_sysroot "$lib" - case $lib in - *.la) func_source "$func_resolve_sysroot_result" ;; - esac - - # Collect preopened libtool deplibs, except any this library - # has declared as weak libs - for deplib in $dependency_libs; do - func_basename "$deplib" - deplib_base=$func_basename_result - case " $weak_libs " in - *" $deplib_base "*) ;; - *) func_append deplibs " $deplib" ;; - esac - done - done - libs="$dlprefiles" - fi - if test "$pass" = dlopen; then - # Collect dlpreopened libraries - save_deplibs="$deplibs" - deplibs= - fi - - for deplib in $libs; do - lib= - found=no - case $deplib in - -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \ - |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*) - if test "$linkmode,$pass" = "prog,link"; then - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - else - func_append compiler_flags " $deplib" - if test "$linkmode" = lib ; then - case "$new_inherited_linker_flags " in - *" $deplib "*) ;; - * ) func_append new_inherited_linker_flags " $deplib" ;; - esac - fi - fi - continue - ;; - -l*) - if test "$linkmode" != lib && test "$linkmode" != prog; then - func_warning "\`-l' is ignored for archives/objects" - continue - fi - func_stripname '-l' '' "$deplib" - name=$func_stripname_result - if test "$linkmode" = lib; then - searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path" - else - searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path" - fi - for searchdir in $searchdirs; do - for search_ext in .la $std_shrext .so .a; do - # Search the libtool library - lib="$searchdir/lib${name}${search_ext}" - if test -f "$lib"; then - if test "$search_ext" = ".la"; then - found=yes - else - found=no - fi - break 2 - fi - done - done - if test "$found" != yes; then - # deplib doesn't seem to be a libtool library - if test "$linkmode,$pass" = "prog,link"; then - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - else - deplibs="$deplib $deplibs" - test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" - fi - continue - else # deplib is a libtool library - # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib, - # We need to do some special things here, and not later. - if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then - case " $predeps $postdeps " in - *" $deplib "*) - if func_lalib_p "$lib"; then - library_names= - old_library= - func_source "$lib" - for l in $old_library $library_names; do - ll="$l" - done - if test "X$ll" = "X$old_library" ; then # only static version available - found=no - func_dirname "$lib" "" "." - ladir="$func_dirname_result" - lib=$ladir/$old_library - if test "$linkmode,$pass" = "prog,link"; then - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - else - deplibs="$deplib $deplibs" - test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" - fi - continue - fi - fi - ;; - *) ;; - esac - fi - fi - ;; # -l - *.ltframework) - if test "$linkmode,$pass" = "prog,link"; then - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - else - deplibs="$deplib $deplibs" - if test "$linkmode" = lib ; then - case "$new_inherited_linker_flags " in - *" $deplib "*) ;; - * ) func_append new_inherited_linker_flags " $deplib" ;; - esac - fi - fi - continue - ;; - -L*) - case $linkmode in - lib) - deplibs="$deplib $deplibs" - test "$pass" = conv && continue - newdependency_libs="$deplib $newdependency_libs" - func_stripname '-L' '' "$deplib" - func_resolve_sysroot "$func_stripname_result" - func_append newlib_search_path " $func_resolve_sysroot_result" - ;; - prog) - if test "$pass" = conv; then - deplibs="$deplib $deplibs" - continue - fi - if test "$pass" = scan; then - deplibs="$deplib $deplibs" - else - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - fi - func_stripname '-L' '' "$deplib" - func_resolve_sysroot "$func_stripname_result" - func_append newlib_search_path " $func_resolve_sysroot_result" - ;; - *) - func_warning "\`-L' is ignored for archives/objects" - ;; - esac # linkmode - continue - ;; # -L - -R*) - if test "$pass" = link; then - func_stripname '-R' '' "$deplib" - func_resolve_sysroot "$func_stripname_result" - dir=$func_resolve_sysroot_result - # Make sure the xrpath contains only unique directories. - case "$xrpath " in - *" $dir "*) ;; - *) func_append xrpath " $dir" ;; - esac - fi - deplibs="$deplib $deplibs" - continue - ;; - *.la) - func_resolve_sysroot "$deplib" - lib=$func_resolve_sysroot_result - ;; - *.$libext) - if test "$pass" = conv; then - deplibs="$deplib $deplibs" - continue - fi - case $linkmode in - lib) - # Linking convenience modules into shared libraries is allowed, - # but linking other static libraries is non-portable. - case " $dlpreconveniencelibs " in - *" $deplib "*) ;; - *) - valid_a_lib=no - case $deplibs_check_method in - match_pattern*) - set dummy $deplibs_check_method; shift - match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` - if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \ - | $EGREP "$match_pattern_regex" > /dev/null; then - valid_a_lib=yes - fi - ;; - pass_all) - valid_a_lib=yes - ;; - esac - if test "$valid_a_lib" != yes; then - echo - $ECHO "*** Warning: Trying to link with static lib archive $deplib." - echo "*** I have the capability to make that library automatically link in when" - echo "*** you link to this library. But I can only do this if you have a" - echo "*** shared version of the library, which you do not appear to have" - echo "*** because the file extensions .$libext of this argument makes me believe" - echo "*** that it is just a static archive that I should not use here." - else - echo - $ECHO "*** Warning: Linking the shared library $output against the" - $ECHO "*** static library $deplib is not portable!" - deplibs="$deplib $deplibs" - fi - ;; - esac - continue - ;; - prog) - if test "$pass" != link; then - deplibs="$deplib $deplibs" - else - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - fi - continue - ;; - esac # linkmode - ;; # *.$libext - *.lo | *.$objext) - if test "$pass" = conv; then - deplibs="$deplib $deplibs" - elif test "$linkmode" = prog; then - if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then - # If there is no dlopen support or we're linking statically, - # we need to preload. - func_append newdlprefiles " $deplib" - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - else - func_append newdlfiles " $deplib" - fi - fi - continue - ;; - %DEPLIBS%) - alldeplibs=yes - continue - ;; - esac # case $deplib - - if test "$found" = yes || test -f "$lib"; then : - else - func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'" - fi - - # Check to see that this really is a libtool archive. - func_lalib_unsafe_p "$lib" \ - || func_fatal_error "\`$lib' is not a valid libtool archive" - - func_dirname "$lib" "" "." - ladir="$func_dirname_result" - - dlname= - dlopen= - dlpreopen= - libdir= - library_names= - old_library= - inherited_linker_flags= - # If the library was installed with an old release of libtool, - # it will not redefine variables installed, or shouldnotlink - installed=yes - shouldnotlink=no - avoidtemprpath= - - - # Read the .la file - func_source "$lib" - - # Convert "-framework foo" to "foo.ltframework" - if test -n "$inherited_linker_flags"; then - tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'` - for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do - case " $new_inherited_linker_flags " in - *" $tmp_inherited_linker_flag "*) ;; - *) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";; - esac - done - fi - dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` - if test "$linkmode,$pass" = "lib,link" || - test "$linkmode,$pass" = "prog,scan" || - { test "$linkmode" != prog && test "$linkmode" != lib; }; then - test -n "$dlopen" && func_append dlfiles " $dlopen" - test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen" - fi - - if test "$pass" = conv; then - # Only check for convenience libraries - deplibs="$lib $deplibs" - if test -z "$libdir"; then - if test -z "$old_library"; then - func_fatal_error "cannot find name of link library for \`$lib'" - fi - # It is a libtool convenience library, so add in its objects. - func_append convenience " $ladir/$objdir/$old_library" - func_append old_convenience " $ladir/$objdir/$old_library" - elif test "$linkmode" != prog && test "$linkmode" != lib; then - func_fatal_error "\`$lib' is not a convenience library" - fi - tmp_libs= - for deplib in $dependency_libs; do - deplibs="$deplib $deplibs" - if $opt_preserve_dup_deps ; then - case "$tmp_libs " in - *" $deplib "*) func_append specialdeplibs " $deplib" ;; - esac - fi - func_append tmp_libs " $deplib" - done - continue - fi # $pass = conv - - - # Get the name of the library we link against. - linklib= - if test -n "$old_library" && - { test "$prefer_static_libs" = yes || - test "$prefer_static_libs,$installed" = "built,no"; }; then - linklib=$old_library - else - for l in $old_library $library_names; do - linklib="$l" - done - fi - if test -z "$linklib"; then - func_fatal_error "cannot find name of link library for \`$lib'" - fi - - # This library was specified with -dlopen. - if test "$pass" = dlopen; then - if test -z "$libdir"; then - func_fatal_error "cannot -dlopen a convenience library: \`$lib'" - fi - if test -z "$dlname" || - test "$dlopen_support" != yes || - test "$build_libtool_libs" = no; then - # If there is no dlname, no dlopen support or we're linking - # statically, we need to preload. We also need to preload any - # dependent libraries so libltdl's deplib preloader doesn't - # bomb out in the load deplibs phase. - func_append dlprefiles " $lib $dependency_libs" - else - func_append newdlfiles " $lib" - fi - continue - fi # $pass = dlopen - - # We need an absolute path. - case $ladir in - [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;; - *) - abs_ladir=`cd "$ladir" && pwd` - if test -z "$abs_ladir"; then - func_warning "cannot determine absolute directory name of \`$ladir'" - func_warning "passing it literally to the linker, although it might fail" - abs_ladir="$ladir" - fi - ;; - esac - func_basename "$lib" - laname="$func_basename_result" - - # Find the relevant object directory and library name. - if test "X$installed" = Xyes; then - if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then - func_warning "library \`$lib' was moved." - dir="$ladir" - absdir="$abs_ladir" - libdir="$abs_ladir" - else - dir="$lt_sysroot$libdir" - absdir="$lt_sysroot$libdir" - fi - test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes - else - if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then - dir="$ladir" - absdir="$abs_ladir" - # Remove this search path later - func_append notinst_path " $abs_ladir" - else - dir="$ladir/$objdir" - absdir="$abs_ladir/$objdir" - # Remove this search path later - func_append notinst_path " $abs_ladir" - fi - fi # $installed = yes - func_stripname 'lib' '.la' "$laname" - name=$func_stripname_result - - # This library was specified with -dlpreopen. - if test "$pass" = dlpreopen; then - if test -z "$libdir" && test "$linkmode" = prog; then - func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'" - fi - case "$host" in - # special handling for platforms with PE-DLLs. - *cygwin* | *mingw* | *cegcc* ) - # Linker will automatically link against shared library if both - # static and shared are present. Therefore, ensure we extract - # symbols from the import library if a shared library is present - # (otherwise, the dlopen module name will be incorrect). We do - # this by putting the import library name into $newdlprefiles. - # We recover the dlopen module name by 'saving' the la file - # name in a special purpose variable, and (later) extracting the - # dlname from the la file. - if test -n "$dlname"; then - func_tr_sh "$dir/$linklib" - eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname" - func_append newdlprefiles " $dir/$linklib" - else - func_append newdlprefiles " $dir/$old_library" - # Keep a list of preopened convenience libraries to check - # that they are being used correctly in the link pass. - test -z "$libdir" && \ - func_append dlpreconveniencelibs " $dir/$old_library" - fi - ;; - * ) - # Prefer using a static library (so that no silly _DYNAMIC symbols - # are required to link). - if test -n "$old_library"; then - func_append newdlprefiles " $dir/$old_library" - # Keep a list of preopened convenience libraries to check - # that they are being used correctly in the link pass. - test -z "$libdir" && \ - func_append dlpreconveniencelibs " $dir/$old_library" - # Otherwise, use the dlname, so that lt_dlopen finds it. - elif test -n "$dlname"; then - func_append newdlprefiles " $dir/$dlname" - else - func_append newdlprefiles " $dir/$linklib" - fi - ;; - esac - fi # $pass = dlpreopen - - if test -z "$libdir"; then - # Link the convenience library - if test "$linkmode" = lib; then - deplibs="$dir/$old_library $deplibs" - elif test "$linkmode,$pass" = "prog,link"; then - compile_deplibs="$dir/$old_library $compile_deplibs" - finalize_deplibs="$dir/$old_library $finalize_deplibs" - else - deplibs="$lib $deplibs" # used for prog,scan pass - fi - continue - fi - - - if test "$linkmode" = prog && test "$pass" != link; then - func_append newlib_search_path " $ladir" - deplibs="$lib $deplibs" - - linkalldeplibs=no - if test "$link_all_deplibs" != no || test -z "$library_names" || - test "$build_libtool_libs" = no; then - linkalldeplibs=yes - fi - - tmp_libs= - for deplib in $dependency_libs; do - case $deplib in - -L*) func_stripname '-L' '' "$deplib" - func_resolve_sysroot "$func_stripname_result" - func_append newlib_search_path " $func_resolve_sysroot_result" - ;; - esac - # Need to link against all dependency_libs? - if test "$linkalldeplibs" = yes; then - deplibs="$deplib $deplibs" - else - # Need to hardcode shared library paths - # or/and link against static libraries - newdependency_libs="$deplib $newdependency_libs" - fi - if $opt_preserve_dup_deps ; then - case "$tmp_libs " in - *" $deplib "*) func_append specialdeplibs " $deplib" ;; - esac - fi - func_append tmp_libs " $deplib" - done # for deplib - continue - fi # $linkmode = prog... - - if test "$linkmode,$pass" = "prog,link"; then - if test -n "$library_names" && - { { test "$prefer_static_libs" = no || - test "$prefer_static_libs,$installed" = "built,yes"; } || - test -z "$old_library"; }; then - # We need to hardcode the library path - if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then - # Make sure the rpath contains only unique directories. - case "$temp_rpath:" in - *"$absdir:"*) ;; - *) func_append temp_rpath "$absdir:" ;; - esac - fi - - # Hardcode the library path. - # Skip directories that are in the system default run-time - # search path. - case " $sys_lib_dlsearch_path " in - *" $absdir "*) ;; - *) - case "$compile_rpath " in - *" $absdir "*) ;; - *) func_append compile_rpath " $absdir" ;; - esac - ;; - esac - case " $sys_lib_dlsearch_path " in - *" $libdir "*) ;; - *) - case "$finalize_rpath " in - *" $libdir "*) ;; - *) func_append finalize_rpath " $libdir" ;; - esac - ;; - esac - fi # $linkmode,$pass = prog,link... - - if test "$alldeplibs" = yes && - { test "$deplibs_check_method" = pass_all || - { test "$build_libtool_libs" = yes && - test -n "$library_names"; }; }; then - # We only need to search for static libraries - continue - fi - fi - - link_static=no # Whether the deplib will be linked statically - use_static_libs=$prefer_static_libs - if test "$use_static_libs" = built && test "$installed" = yes; then - use_static_libs=no - fi - if test -n "$library_names" && - { test "$use_static_libs" = no || test -z "$old_library"; }; then - case $host in - *cygwin* | *mingw* | *cegcc*) - # No point in relinking DLLs because paths are not encoded - func_append notinst_deplibs " $lib" - need_relink=no - ;; - *) - if test "$installed" = no; then - func_append notinst_deplibs " $lib" - need_relink=yes - fi - ;; - esac - # This is a shared library - - # Warn about portability, can't link against -module's on some - # systems (darwin). Don't bleat about dlopened modules though! - dlopenmodule="" - for dlpremoduletest in $dlprefiles; do - if test "X$dlpremoduletest" = "X$lib"; then - dlopenmodule="$dlpremoduletest" - break - fi - done - if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then - echo - if test "$linkmode" = prog; then - $ECHO "*** Warning: Linking the executable $output against the loadable module" - else - $ECHO "*** Warning: Linking the shared library $output against the loadable module" - fi - $ECHO "*** $linklib is not portable!" - fi - if test "$linkmode" = lib && - test "$hardcode_into_libs" = yes; then - # Hardcode the library path. - # Skip directories that are in the system default run-time - # search path. - case " $sys_lib_dlsearch_path " in - *" $absdir "*) ;; - *) - case "$compile_rpath " in - *" $absdir "*) ;; - *) func_append compile_rpath " $absdir" ;; - esac - ;; - esac - case " $sys_lib_dlsearch_path " in - *" $libdir "*) ;; - *) - case "$finalize_rpath " in - *" $libdir "*) ;; - *) func_append finalize_rpath " $libdir" ;; - esac - ;; - esac - fi - - if test -n "$old_archive_from_expsyms_cmds"; then - # figure out the soname - set dummy $library_names - shift - realname="$1" - shift - libname=`eval "\\$ECHO \"$libname_spec\""` - # use dlname if we got it. it's perfectly good, no? - if test -n "$dlname"; then - soname="$dlname" - elif test -n "$soname_spec"; then - # bleh windows - case $host in - *cygwin* | mingw* | *cegcc*) - func_arith $current - $age - major=$func_arith_result - versuffix="-$major" - ;; - esac - eval soname=\"$soname_spec\" - else - soname="$realname" - fi - - # Make a new name for the extract_expsyms_cmds to use - soroot="$soname" - func_basename "$soroot" - soname="$func_basename_result" - func_stripname 'lib' '.dll' "$soname" - newlib=libimp-$func_stripname_result.a - - # If the library has no export list, then create one now - if test -f "$output_objdir/$soname-def"; then : - else - func_verbose "extracting exported symbol list from \`$soname'" - func_execute_cmds "$extract_expsyms_cmds" 'exit $?' - fi - - # Create $newlib - if test -f "$output_objdir/$newlib"; then :; else - func_verbose "generating import library for \`$soname'" - func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?' - fi - # make sure the library variables are pointing to the new library - dir=$output_objdir - linklib=$newlib - fi # test -n "$old_archive_from_expsyms_cmds" - - if test "$linkmode" = prog || test "$opt_mode" != relink; then - add_shlibpath= - add_dir= - add= - lib_linked=yes - case $hardcode_action in - immediate | unsupported) - if test "$hardcode_direct" = no; then - add="$dir/$linklib" - case $host in - *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;; - *-*-sysv4*uw2*) add_dir="-L$dir" ;; - *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \ - *-*-unixware7*) add_dir="-L$dir" ;; - *-*-darwin* ) - # if the lib is a (non-dlopened) module then we can not - # link against it, someone is ignoring the earlier warnings - if /usr/bin/file -L $add 2> /dev/null | - $GREP ": [^:]* bundle" >/dev/null ; then - if test "X$dlopenmodule" != "X$lib"; then - $ECHO "*** Warning: lib $linklib is a module, not a shared library" - if test -z "$old_library" ; then - echo - echo "*** And there doesn't seem to be a static archive available" - echo "*** The link will probably fail, sorry" - else - add="$dir/$old_library" - fi - elif test -n "$old_library"; then - add="$dir/$old_library" - fi - fi - esac - elif test "$hardcode_minus_L" = no; then - case $host in - *-*-sunos*) add_shlibpath="$dir" ;; - esac - add_dir="-L$dir" - add="-l$name" - elif test "$hardcode_shlibpath_var" = no; then - add_shlibpath="$dir" - add="-l$name" - else - lib_linked=no - fi - ;; - relink) - if test "$hardcode_direct" = yes && - test "$hardcode_direct_absolute" = no; then - add="$dir/$linklib" - elif test "$hardcode_minus_L" = yes; then - add_dir="-L$absdir" - # Try looking first in the location we're being installed to. - if test -n "$inst_prefix_dir"; then - case $libdir in - [\\/]*) - func_append add_dir " -L$inst_prefix_dir$libdir" - ;; - esac - fi - add="-l$name" - elif test "$hardcode_shlibpath_var" = yes; then - add_shlibpath="$dir" - add="-l$name" - else - lib_linked=no - fi - ;; - *) lib_linked=no ;; - esac - - if test "$lib_linked" != yes; then - func_fatal_configuration "unsupported hardcode properties" - fi - - if test -n "$add_shlibpath"; then - case :$compile_shlibpath: in - *":$add_shlibpath:"*) ;; - *) func_append compile_shlibpath "$add_shlibpath:" ;; - esac - fi - if test "$linkmode" = prog; then - test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" - test -n "$add" && compile_deplibs="$add $compile_deplibs" - else - test -n "$add_dir" && deplibs="$add_dir $deplibs" - test -n "$add" && deplibs="$add $deplibs" - if test "$hardcode_direct" != yes && - test "$hardcode_minus_L" != yes && - test "$hardcode_shlibpath_var" = yes; then - case :$finalize_shlibpath: in - *":$libdir:"*) ;; - *) func_append finalize_shlibpath "$libdir:" ;; - esac - fi - fi - fi - - if test "$linkmode" = prog || test "$opt_mode" = relink; then - add_shlibpath= - add_dir= - add= - # Finalize command for both is simple: just hardcode it. - if test "$hardcode_direct" = yes && - test "$hardcode_direct_absolute" = no; then - add="$libdir/$linklib" - elif test "$hardcode_minus_L" = yes; then - add_dir="-L$libdir" - add="-l$name" - elif test "$hardcode_shlibpath_var" = yes; then - case :$finalize_shlibpath: in - *":$libdir:"*) ;; - *) func_append finalize_shlibpath "$libdir:" ;; - esac - add="-l$name" - elif test "$hardcode_automatic" = yes; then - if test -n "$inst_prefix_dir" && - test -f "$inst_prefix_dir$libdir/$linklib" ; then - add="$inst_prefix_dir$libdir/$linklib" - else - add="$libdir/$linklib" - fi - else - # We cannot seem to hardcode it, guess we'll fake it. - add_dir="-L$libdir" - # Try looking first in the location we're being installed to. - if test -n "$inst_prefix_dir"; then - case $libdir in - [\\/]*) - func_append add_dir " -L$inst_prefix_dir$libdir" - ;; - esac - fi - add="-l$name" - fi - - if test "$linkmode" = prog; then - test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" - test -n "$add" && finalize_deplibs="$add $finalize_deplibs" - else - test -n "$add_dir" && deplibs="$add_dir $deplibs" - test -n "$add" && deplibs="$add $deplibs" - fi - fi - elif test "$linkmode" = prog; then - # Here we assume that one of hardcode_direct or hardcode_minus_L - # is not unsupported. This is valid on all known static and - # shared platforms. - if test "$hardcode_direct" != unsupported; then - test -n "$old_library" && linklib="$old_library" - compile_deplibs="$dir/$linklib $compile_deplibs" - finalize_deplibs="$dir/$linklib $finalize_deplibs" - else - compile_deplibs="-l$name -L$dir $compile_deplibs" - finalize_deplibs="-l$name -L$dir $finalize_deplibs" - fi - elif test "$build_libtool_libs" = yes; then - # Not a shared library - if test "$deplibs_check_method" != pass_all; then - # We're trying link a shared library against a static one - # but the system doesn't support it. - - # Just print a warning and add the library to dependency_libs so - # that the program can be linked against the static library. - echo - $ECHO "*** Warning: This system can not link to static lib archive $lib." - echo "*** I have the capability to make that library automatically link in when" - echo "*** you link to this library. But I can only do this if you have a" - echo "*** shared version of the library, which you do not appear to have." - if test "$module" = yes; then - echo "*** But as you try to build a module library, libtool will still create " - echo "*** a static module, that should work as long as the dlopening application" - echo "*** is linked with the -dlopen flag to resolve symbols at runtime." - if test -z "$global_symbol_pipe"; then - echo - echo "*** However, this would only work if libtool was able to extract symbol" - echo "*** lists from a program, using \`nm' or equivalent, but libtool could" - echo "*** not find such a program. So, this module is probably useless." - echo "*** \`nm' from GNU binutils and a full rebuild may help." - fi - if test "$build_old_libs" = no; then - build_libtool_libs=module - build_old_libs=yes - else - build_libtool_libs=no - fi - fi - else - deplibs="$dir/$old_library $deplibs" - link_static=yes - fi - fi # link shared/static library? - - if test "$linkmode" = lib; then - if test -n "$dependency_libs" && - { test "$hardcode_into_libs" != yes || - test "$build_old_libs" = yes || - test "$link_static" = yes; }; then - # Extract -R from dependency_libs - temp_deplibs= - for libdir in $dependency_libs; do - case $libdir in - -R*) func_stripname '-R' '' "$libdir" - temp_xrpath=$func_stripname_result - case " $xrpath " in - *" $temp_xrpath "*) ;; - *) func_append xrpath " $temp_xrpath";; - esac;; - *) func_append temp_deplibs " $libdir";; - esac - done - dependency_libs="$temp_deplibs" - fi - - func_append newlib_search_path " $absdir" - # Link against this library - test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" - # ... and its dependency_libs - tmp_libs= - for deplib in $dependency_libs; do - newdependency_libs="$deplib $newdependency_libs" - case $deplib in - -L*) func_stripname '-L' '' "$deplib" - func_resolve_sysroot "$func_stripname_result";; - *) func_resolve_sysroot "$deplib" ;; - esac - if $opt_preserve_dup_deps ; then - case "$tmp_libs " in - *" $func_resolve_sysroot_result "*) - func_append specialdeplibs " $func_resolve_sysroot_result" ;; - esac - fi - func_append tmp_libs " $func_resolve_sysroot_result" - done - - if test "$link_all_deplibs" != no; then - # Add the search paths of all dependency libraries - for deplib in $dependency_libs; do - path= - case $deplib in - -L*) path="$deplib" ;; - *.la) - func_resolve_sysroot "$deplib" - deplib=$func_resolve_sysroot_result - func_dirname "$deplib" "" "." - dir=$func_dirname_result - # We need an absolute path. - case $dir in - [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; - *) - absdir=`cd "$dir" && pwd` - if test -z "$absdir"; then - func_warning "cannot determine absolute directory name of \`$dir'" - absdir="$dir" - fi - ;; - esac - if $GREP "^installed=no" $deplib > /dev/null; then - case $host in - *-*-darwin*) - depdepl= - eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` - if test -n "$deplibrary_names" ; then - for tmp in $deplibrary_names ; do - depdepl=$tmp - done - if test -f "$absdir/$objdir/$depdepl" ; then - depdepl="$absdir/$objdir/$depdepl" - darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` - if test -z "$darwin_install_name"; then - darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` - fi - func_append compiler_flags " ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}" - func_append linker_flags " -dylib_file ${darwin_install_name}:${depdepl}" - path= - fi - fi - ;; - *) - path="-L$absdir/$objdir" - ;; - esac - else - eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` - test -z "$libdir" && \ - func_fatal_error "\`$deplib' is not a valid libtool archive" - test "$absdir" != "$libdir" && \ - func_warning "\`$deplib' seems to be moved" - - path="-L$absdir" - fi - ;; - esac - case " $deplibs " in - *" $path "*) ;; - *) deplibs="$path $deplibs" ;; - esac - done - fi # link_all_deplibs != no - fi # linkmode = lib - done # for deplib in $libs - if test "$pass" = link; then - if test "$linkmode" = "prog"; then - compile_deplibs="$new_inherited_linker_flags $compile_deplibs" - finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs" - else - compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` - fi - fi - dependency_libs="$newdependency_libs" - if test "$pass" = dlpreopen; then - # Link the dlpreopened libraries before other libraries - for deplib in $save_deplibs; do - deplibs="$deplib $deplibs" - done - fi - if test "$pass" != dlopen; then - if test "$pass" != conv; then - # Make sure lib_search_path contains only unique directories. - lib_search_path= - for dir in $newlib_search_path; do - case "$lib_search_path " in - *" $dir "*) ;; - *) func_append lib_search_path " $dir" ;; - esac - done - newlib_search_path= - fi - - if test "$linkmode,$pass" != "prog,link"; then - vars="deplibs" - else - vars="compile_deplibs finalize_deplibs" - fi - for var in $vars dependency_libs; do - # Add libraries to $var in reverse order - eval tmp_libs=\"\$$var\" - new_libs= - for deplib in $tmp_libs; do - # FIXME: Pedantically, this is the right thing to do, so - # that some nasty dependency loop isn't accidentally - # broken: - #new_libs="$deplib $new_libs" - # Pragmatically, this seems to cause very few problems in - # practice: - case $deplib in - -L*) new_libs="$deplib $new_libs" ;; - -R*) ;; - *) - # And here is the reason: when a library appears more - # than once as an explicit dependence of a library, or - # is implicitly linked in more than once by the - # compiler, it is considered special, and multiple - # occurrences thereof are not removed. Compare this - # with having the same library being listed as a - # dependency of multiple other libraries: in this case, - # we know (pedantically, we assume) the library does not - # need to be listed more than once, so we keep only the - # last copy. This is not always right, but it is rare - # enough that we require users that really mean to play - # such unportable linking tricks to link the library - # using -Wl,-lname, so that libtool does not consider it - # for duplicate removal. - case " $specialdeplibs " in - *" $deplib "*) new_libs="$deplib $new_libs" ;; - *) - case " $new_libs " in - *" $deplib "*) ;; - *) new_libs="$deplib $new_libs" ;; - esac - ;; - esac - ;; - esac - done - tmp_libs= - for deplib in $new_libs; do - case $deplib in - -L*) - case " $tmp_libs " in - *" $deplib "*) ;; - *) func_append tmp_libs " $deplib" ;; - esac - ;; - *) func_append tmp_libs " $deplib" ;; - esac - done - eval $var=\"$tmp_libs\" - done # for var - fi - # Last step: remove runtime libs from dependency_libs - # (they stay in deplibs) - tmp_libs= - for i in $dependency_libs ; do - case " $predeps $postdeps $compiler_lib_search_path " in - *" $i "*) - i="" - ;; - esac - if test -n "$i" ; then - func_append tmp_libs " $i" - fi - done - dependency_libs=$tmp_libs - done # for pass - if test "$linkmode" = prog; then - dlfiles="$newdlfiles" - fi - if test "$linkmode" = prog || test "$linkmode" = lib; then - dlprefiles="$newdlprefiles" - fi - - case $linkmode in - oldlib) - if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then - func_warning "\`-dlopen' is ignored for archives" - fi - - case " $deplibs" in - *\ -l* | *\ -L*) - func_warning "\`-l' and \`-L' are ignored for archives" ;; - esac - - test -n "$rpath" && \ - func_warning "\`-rpath' is ignored for archives" - - test -n "$xrpath" && \ - func_warning "\`-R' is ignored for archives" - - test -n "$vinfo" && \ - func_warning "\`-version-info/-version-number' is ignored for archives" - - test -n "$release" && \ - func_warning "\`-release' is ignored for archives" - - test -n "$export_symbols$export_symbols_regex" && \ - func_warning "\`-export-symbols' is ignored for archives" - - # Now set the variables for building old libraries. - build_libtool_libs=no - oldlibs="$output" - func_append objs "$old_deplibs" - ;; - - lib) - # Make sure we only generate libraries of the form `libNAME.la'. - case $outputname in - lib*) - func_stripname 'lib' '.la' "$outputname" - name=$func_stripname_result - eval shared_ext=\"$shrext_cmds\" - eval libname=\"$libname_spec\" - ;; - *) - test "$module" = no && \ - func_fatal_help "libtool library \`$output' must begin with \`lib'" - - if test "$need_lib_prefix" != no; then - # Add the "lib" prefix for modules if required - func_stripname '' '.la' "$outputname" - name=$func_stripname_result - eval shared_ext=\"$shrext_cmds\" - eval libname=\"$libname_spec\" - else - func_stripname '' '.la' "$outputname" - libname=$func_stripname_result - fi - ;; - esac - - if test -n "$objs"; then - if test "$deplibs_check_method" != pass_all; then - func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs" - else - echo - $ECHO "*** Warning: Linking the shared library $output against the non-libtool" - $ECHO "*** objects $objs is not portable!" - func_append libobjs " $objs" - fi - fi - - test "$dlself" != no && \ - func_warning "\`-dlopen self' is ignored for libtool libraries" - - set dummy $rpath - shift - test "$#" -gt 1 && \ - func_warning "ignoring multiple \`-rpath's for a libtool library" - - install_libdir="$1" - - oldlibs= - if test -z "$rpath"; then - if test "$build_libtool_libs" = yes; then - # Building a libtool convenience library. - # Some compilers have problems with a `.al' extension so - # convenience libraries should have the same extension an - # archive normally would. - oldlibs="$output_objdir/$libname.$libext $oldlibs" - build_libtool_libs=convenience - build_old_libs=yes - fi - - test -n "$vinfo" && \ - func_warning "\`-version-info/-version-number' is ignored for convenience libraries" - - test -n "$release" && \ - func_warning "\`-release' is ignored for convenience libraries" - else - - # Parse the version information argument. - save_ifs="$IFS"; IFS=':' - set dummy $vinfo 0 0 0 - shift - IFS="$save_ifs" - - test -n "$7" && \ - func_fatal_help "too many parameters to \`-version-info'" - - # convert absolute version numbers to libtool ages - # this retains compatibility with .la files and attempts - # to make the code below a bit more comprehensible - - case $vinfo_number in - yes) - number_major="$1" - number_minor="$2" - number_revision="$3" - # - # There are really only two kinds -- those that - # use the current revision as the major version - # and those that subtract age and use age as - # a minor version. But, then there is irix - # which has an extra 1 added just for fun - # - case $version_type in - # correct linux to gnu/linux during the next big refactor - darwin|linux|osf|windows|none) - func_arith $number_major + $number_minor - current=$func_arith_result - age="$number_minor" - revision="$number_revision" - ;; - freebsd-aout|freebsd-elf|qnx|sunos) - current="$number_major" - revision="$number_minor" - age="0" - ;; - irix|nonstopux) - func_arith $number_major + $number_minor - current=$func_arith_result - age="$number_minor" - revision="$number_minor" - lt_irix_increment=no - ;; - esac - ;; - no) - current="$1" - revision="$2" - age="$3" - ;; - esac - - # Check that each of the things are valid numbers. - case $current in - 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; - *) - func_error "CURRENT \`$current' must be a nonnegative integer" - func_fatal_error "\`$vinfo' is not valid version information" - ;; - esac - - case $revision in - 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; - *) - func_error "REVISION \`$revision' must be a nonnegative integer" - func_fatal_error "\`$vinfo' is not valid version information" - ;; - esac - - case $age in - 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; - *) - func_error "AGE \`$age' must be a nonnegative integer" - func_fatal_error "\`$vinfo' is not valid version information" - ;; - esac - - if test "$age" -gt "$current"; then - func_error "AGE \`$age' is greater than the current interface number \`$current'" - func_fatal_error "\`$vinfo' is not valid version information" - fi - - # Calculate the version variables. - major= - versuffix= - verstring= - case $version_type in - none) ;; - - darwin) - # Like Linux, but with the current version available in - # verstring for coding it into the library header - func_arith $current - $age - major=.$func_arith_result - versuffix="$major.$age.$revision" - # Darwin ld doesn't like 0 for these options... - func_arith $current + 1 - minor_current=$func_arith_result - xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision" - verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" - ;; - - freebsd-aout) - major=".$current" - versuffix=".$current.$revision"; - ;; - - freebsd-elf) - major=".$current" - versuffix=".$current" - ;; - - irix | nonstopux) - if test "X$lt_irix_increment" = "Xno"; then - func_arith $current - $age - else - func_arith $current - $age + 1 - fi - major=$func_arith_result - - case $version_type in - nonstopux) verstring_prefix=nonstopux ;; - *) verstring_prefix=sgi ;; - esac - verstring="$verstring_prefix$major.$revision" - - # Add in all the interfaces that we are compatible with. - loop=$revision - while test "$loop" -ne 0; do - func_arith $revision - $loop - iface=$func_arith_result - func_arith $loop - 1 - loop=$func_arith_result - verstring="$verstring_prefix$major.$iface:$verstring" - done - - # Before this point, $major must not contain `.'. - major=.$major - versuffix="$major.$revision" - ;; - - linux) # correct to gnu/linux during the next big refactor - func_arith $current - $age - major=.$func_arith_result - versuffix="$major.$age.$revision" - ;; - - osf) - func_arith $current - $age - major=.$func_arith_result - versuffix=".$current.$age.$revision" - verstring="$current.$age.$revision" - - # Add in all the interfaces that we are compatible with. - loop=$age - while test "$loop" -ne 0; do - func_arith $current - $loop - iface=$func_arith_result - func_arith $loop - 1 - loop=$func_arith_result - verstring="$verstring:${iface}.0" - done - - # Make executables depend on our current version. - func_append verstring ":${current}.0" - ;; - - qnx) - major=".$current" - versuffix=".$current" - ;; - - sunos) - major=".$current" - versuffix=".$current.$revision" - ;; - - windows) - # Use '-' rather than '.', since we only want one - # extension on DOS 8.3 filesystems. - func_arith $current - $age - major=$func_arith_result - versuffix="-$major" - ;; - - *) - func_fatal_configuration "unknown library version type \`$version_type'" - ;; - esac - - # Clear the version info if we defaulted, and they specified a release. - if test -z "$vinfo" && test -n "$release"; then - major= - case $version_type in - darwin) - # we can't check for "0.0" in archive_cmds due to quoting - # problems, so we reset it completely - verstring= - ;; - *) - verstring="0.0" - ;; - esac - if test "$need_version" = no; then - versuffix= - else - versuffix=".0.0" - fi - fi - - # Remove version info from name if versioning should be avoided - if test "$avoid_version" = yes && test "$need_version" = no; then - major= - versuffix= - verstring="" - fi - - # Check to see if the archive will have undefined symbols. - if test "$allow_undefined" = yes; then - if test "$allow_undefined_flag" = unsupported; then - func_warning "undefined symbols not allowed in $host shared libraries" - build_libtool_libs=no - build_old_libs=yes - fi - else - # Don't allow undefined symbols. - allow_undefined_flag="$no_undefined_flag" - fi - - fi - - func_generate_dlsyms "$libname" "$libname" "yes" - func_append libobjs " $symfileobj" - test "X$libobjs" = "X " && libobjs= - - if test "$opt_mode" != relink; then - # Remove our outputs, but don't remove object files since they - # may have been created when compiling PIC objects. - removelist= - tempremovelist=`$ECHO "$output_objdir/*"` - for p in $tempremovelist; do - case $p in - *.$objext | *.gcno) - ;; - $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*) - if test "X$precious_files_regex" != "X"; then - if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 - then - continue - fi - fi - func_append removelist " $p" - ;; - *) ;; - esac - done - test -n "$removelist" && \ - func_show_eval "${RM}r \$removelist" - fi - - # Now set the variables for building old libraries. - if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then - func_append oldlibs " $output_objdir/$libname.$libext" - - # Transform .lo files to .o files. - oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP` - fi - - # Eliminate all temporary directories. - #for path in $notinst_path; do - # lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"` - # deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"` - # dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"` - #done - - if test -n "$xrpath"; then - # If the user specified any rpath flags, then add them. - temp_xrpath= - for libdir in $xrpath; do - func_replace_sysroot "$libdir" - func_append temp_xrpath " -R$func_replace_sysroot_result" - case "$finalize_rpath " in - *" $libdir "*) ;; - *) func_append finalize_rpath " $libdir" ;; - esac - done - if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then - dependency_libs="$temp_xrpath $dependency_libs" - fi - fi - - # Make sure dlfiles contains only unique files that won't be dlpreopened - old_dlfiles="$dlfiles" - dlfiles= - for lib in $old_dlfiles; do - case " $dlprefiles $dlfiles " in - *" $lib "*) ;; - *) func_append dlfiles " $lib" ;; - esac - done - - # Make sure dlprefiles contains only unique files - old_dlprefiles="$dlprefiles" - dlprefiles= - for lib in $old_dlprefiles; do - case "$dlprefiles " in - *" $lib "*) ;; - *) func_append dlprefiles " $lib" ;; - esac - done - - if test "$build_libtool_libs" = yes; then - if test -n "$rpath"; then - case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*) - # these systems don't actually have a c library (as such)! - ;; - *-*-rhapsody* | *-*-darwin1.[012]) - # Rhapsody C library is in the System framework - func_append deplibs " System.ltframework" - ;; - *-*-netbsd*) - # Don't link with libc until the a.out ld.so is fixed. - ;; - *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) - # Do not include libc due to us having libc/libc_r. - ;; - *-*-sco3.2v5* | *-*-sco5v6*) - # Causes problems with __ctype - ;; - *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) - # Compiler inserts libc in the correct place for threads to work - ;; - *) - # Add libc to deplibs on all other systems if necessary. - if test "$build_libtool_need_lc" = "yes"; then - func_append deplibs " -lc" - fi - ;; - esac - fi - - # Transform deplibs into only deplibs that can be linked in shared. - name_save=$name - libname_save=$libname - release_save=$release - versuffix_save=$versuffix - major_save=$major - # I'm not sure if I'm treating the release correctly. I think - # release should show up in the -l (ie -lgmp5) so we don't want to - # add it in twice. Is that correct? - release="" - versuffix="" - major="" - newdeplibs= - droppeddeps=no - case $deplibs_check_method in - pass_all) - # Don't check for shared/static. Everything works. - # This might be a little naive. We might want to check - # whether the library exists or not. But this is on - # osf3 & osf4 and I'm not really sure... Just - # implementing what was already the behavior. - newdeplibs=$deplibs - ;; - test_compile) - # This code stresses the "libraries are programs" paradigm to its - # limits. Maybe even breaks it. We compile a program, linking it - # against the deplibs as a proxy for the library. Then we can check - # whether they linked in statically or dynamically with ldd. - $opt_dry_run || $RM conftest.c - cat > conftest.c </dev/null` - $nocaseglob - else - potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null` - fi - for potent_lib in $potential_libs; do - # Follow soft links. - if ls -lLd "$potent_lib" 2>/dev/null | - $GREP " -> " >/dev/null; then - continue - fi - # The statement above tries to avoid entering an - # endless loop below, in case of cyclic links. - # We might still enter an endless loop, since a link - # loop can be closed while we follow links, - # but so what? - potlib="$potent_lib" - while test -h "$potlib" 2>/dev/null; do - potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` - case $potliblink in - [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; - *) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";; - esac - done - if eval $file_magic_cmd \"\$potlib\" 2>/dev/null | - $SED -e 10q | - $EGREP "$file_magic_regex" > /dev/null; then - func_append newdeplibs " $a_deplib" - a_deplib="" - break 2 - fi - done - done - fi - if test -n "$a_deplib" ; then - droppeddeps=yes - echo - $ECHO "*** Warning: linker path does not have real file for library $a_deplib." - echo "*** I have the capability to make that library automatically link in when" - echo "*** you link to this library. But I can only do this if you have a" - echo "*** shared version of the library, which you do not appear to have" - echo "*** because I did check the linker path looking for a file starting" - if test -z "$potlib" ; then - $ECHO "*** with $libname but no candidates were found. (...for file magic test)" - else - $ECHO "*** with $libname and none of the candidates passed a file format test" - $ECHO "*** using a file magic. Last file checked: $potlib" - fi - fi - ;; - *) - # Add a -L argument. - func_append newdeplibs " $a_deplib" - ;; - esac - done # Gone through all deplibs. - ;; - match_pattern*) - set dummy $deplibs_check_method; shift - match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` - for a_deplib in $deplibs; do - case $a_deplib in - -l*) - func_stripname -l '' "$a_deplib" - name=$func_stripname_result - if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then - case " $predeps $postdeps " in - *" $a_deplib "*) - func_append newdeplibs " $a_deplib" - a_deplib="" - ;; - esac - fi - if test -n "$a_deplib" ; then - libname=`eval "\\$ECHO \"$libname_spec\""` - for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do - potential_libs=`ls $i/$libname[.-]* 2>/dev/null` - for potent_lib in $potential_libs; do - potlib="$potent_lib" # see symlink-check above in file_magic test - if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \ - $EGREP "$match_pattern_regex" > /dev/null; then - func_append newdeplibs " $a_deplib" - a_deplib="" - break 2 - fi - done - done - fi - if test -n "$a_deplib" ; then - droppeddeps=yes - echo - $ECHO "*** Warning: linker path does not have real file for library $a_deplib." - echo "*** I have the capability to make that library automatically link in when" - echo "*** you link to this library. But I can only do this if you have a" - echo "*** shared version of the library, which you do not appear to have" - echo "*** because I did check the linker path looking for a file starting" - if test -z "$potlib" ; then - $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)" - else - $ECHO "*** with $libname and none of the candidates passed a file format test" - $ECHO "*** using a regex pattern. Last file checked: $potlib" - fi - fi - ;; - *) - # Add a -L argument. - func_append newdeplibs " $a_deplib" - ;; - esac - done # Gone through all deplibs. - ;; - none | unknown | *) - newdeplibs="" - tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'` - if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then - for i in $predeps $postdeps ; do - # can't use Xsed below, because $i might contain '/' - tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"` - done - fi - case $tmp_deplibs in - *[!\ \ ]*) - echo - if test "X$deplibs_check_method" = "Xnone"; then - echo "*** Warning: inter-library dependencies are not supported in this platform." - else - echo "*** Warning: inter-library dependencies are not known to be supported." - fi - echo "*** All declared inter-library dependencies are being dropped." - droppeddeps=yes - ;; - esac - ;; - esac - versuffix=$versuffix_save - major=$major_save - release=$release_save - libname=$libname_save - name=$name_save - - case $host in - *-*-rhapsody* | *-*-darwin1.[012]) - # On Rhapsody replace the C library with the System framework - newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'` - ;; - esac - - if test "$droppeddeps" = yes; then - if test "$module" = yes; then - echo - echo "*** Warning: libtool could not satisfy all declared inter-library" - $ECHO "*** dependencies of module $libname. Therefore, libtool will create" - echo "*** a static module, that should work as long as the dlopening" - echo "*** application is linked with the -dlopen flag." - if test -z "$global_symbol_pipe"; then - echo - echo "*** However, this would only work if libtool was able to extract symbol" - echo "*** lists from a program, using \`nm' or equivalent, but libtool could" - echo "*** not find such a program. So, this module is probably useless." - echo "*** \`nm' from GNU binutils and a full rebuild may help." - fi - if test "$build_old_libs" = no; then - oldlibs="$output_objdir/$libname.$libext" - build_libtool_libs=module - build_old_libs=yes - else - build_libtool_libs=no - fi - else - echo "*** The inter-library dependencies that have been dropped here will be" - echo "*** automatically added whenever a program is linked with this library" - echo "*** or is declared to -dlopen it." - - if test "$allow_undefined" = no; then - echo - echo "*** Since this library must not contain undefined symbols," - echo "*** because either the platform does not support them or" - echo "*** it was explicitly requested with -no-undefined," - echo "*** libtool will only create a static version of it." - if test "$build_old_libs" = no; then - oldlibs="$output_objdir/$libname.$libext" - build_libtool_libs=module - build_old_libs=yes - else - build_libtool_libs=no - fi - fi - fi - fi - # Done checking deplibs! - deplibs=$newdeplibs - fi - # Time to change all our "foo.ltframework" stuff back to "-framework foo" - case $host in - *-*-darwin*) - newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` - new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` - deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` - ;; - esac - - # move library search paths that coincide with paths to not yet - # installed libraries to the beginning of the library search list - new_libs= - for path in $notinst_path; do - case " $new_libs " in - *" -L$path/$objdir "*) ;; - *) - case " $deplibs " in - *" -L$path/$objdir "*) - func_append new_libs " -L$path/$objdir" ;; - esac - ;; - esac - done - for deplib in $deplibs; do - case $deplib in - -L*) - case " $new_libs " in - *" $deplib "*) ;; - *) func_append new_libs " $deplib" ;; - esac - ;; - *) func_append new_libs " $deplib" ;; - esac - done - deplibs="$new_libs" - - # All the library-specific variables (install_libdir is set above). - library_names= - old_library= - dlname= - - # Test again, we may have decided not to build it any more - if test "$build_libtool_libs" = yes; then - # Remove ${wl} instances when linking with ld. - # FIXME: should test the right _cmds variable. - case $archive_cmds in - *\$LD\ *) wl= ;; - esac - if test "$hardcode_into_libs" = yes; then - # Hardcode the library paths - hardcode_libdirs= - dep_rpath= - rpath="$finalize_rpath" - test "$opt_mode" != relink && rpath="$compile_rpath$rpath" - for libdir in $rpath; do - if test -n "$hardcode_libdir_flag_spec"; then - if test -n "$hardcode_libdir_separator"; then - func_replace_sysroot "$libdir" - libdir=$func_replace_sysroot_result - if test -z "$hardcode_libdirs"; then - hardcode_libdirs="$libdir" - else - # Just accumulate the unique libdirs. - case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in - *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) - ;; - *) - func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" - ;; - esac - fi - else - eval flag=\"$hardcode_libdir_flag_spec\" - func_append dep_rpath " $flag" - fi - elif test -n "$runpath_var"; then - case "$perm_rpath " in - *" $libdir "*) ;; - *) func_append perm_rpath " $libdir" ;; - esac - fi - done - # Substitute the hardcoded libdirs into the rpath. - if test -n "$hardcode_libdir_separator" && - test -n "$hardcode_libdirs"; then - libdir="$hardcode_libdirs" - eval "dep_rpath=\"$hardcode_libdir_flag_spec\"" - fi - if test -n "$runpath_var" && test -n "$perm_rpath"; then - # We should set the runpath_var. - rpath= - for dir in $perm_rpath; do - func_append rpath "$dir:" - done - eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" - fi - test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" - fi - - shlibpath="$finalize_shlibpath" - test "$opt_mode" != relink && shlibpath="$compile_shlibpath$shlibpath" - if test -n "$shlibpath"; then - eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" - fi - - # Get the real and link names of the library. - eval shared_ext=\"$shrext_cmds\" - eval library_names=\"$library_names_spec\" - set dummy $library_names - shift - realname="$1" - shift - - if test -n "$soname_spec"; then - eval soname=\"$soname_spec\" - else - soname="$realname" - fi - if test -z "$dlname"; then - dlname=$soname - fi - - lib="$output_objdir/$realname" - linknames= - for link - do - func_append linknames " $link" - done - - # Use standard objects if they are pic - test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP` - test "X$libobjs" = "X " && libobjs= - - delfiles= - if test -n "$export_symbols" && test -n "$include_expsyms"; then - $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp" - export_symbols="$output_objdir/$libname.uexp" - func_append delfiles " $export_symbols" - fi - - orig_export_symbols= - case $host_os in - cygwin* | mingw* | cegcc*) - if test -n "$export_symbols" && test -z "$export_symbols_regex"; then - # exporting using user supplied symfile - if test "x`$SED 1q $export_symbols`" != xEXPORTS; then - # and it's NOT already a .def file. Must figure out - # which of the given symbols are data symbols and tag - # them as such. So, trigger use of export_symbols_cmds. - # export_symbols gets reassigned inside the "prepare - # the list of exported symbols" if statement, so the - # include_expsyms logic still works. - orig_export_symbols="$export_symbols" - export_symbols= - always_export_symbols=yes - fi - fi - ;; - esac - - # Prepare the list of exported symbols - if test -z "$export_symbols"; then - if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then - func_verbose "generating symbol list for \`$libname.la'" - export_symbols="$output_objdir/$libname.exp" - $opt_dry_run || $RM $export_symbols - cmds=$export_symbols_cmds - save_ifs="$IFS"; IFS='~' - for cmd1 in $cmds; do - IFS="$save_ifs" - # Take the normal branch if the nm_file_list_spec branch - # doesn't work or if tool conversion is not needed. - case $nm_file_list_spec~$to_tool_file_cmd in - *~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*) - try_normal_branch=yes - eval cmd=\"$cmd1\" - func_len " $cmd" - len=$func_len_result - ;; - *) - try_normal_branch=no - ;; - esac - if test "$try_normal_branch" = yes \ - && { test "$len" -lt "$max_cmd_len" \ - || test "$max_cmd_len" -le -1; } - then - func_show_eval "$cmd" 'exit $?' - skipped_export=false - elif test -n "$nm_file_list_spec"; then - func_basename "$output" - output_la=$func_basename_result - save_libobjs=$libobjs - save_output=$output - output=${output_objdir}/${output_la}.nm - func_to_tool_file "$output" - libobjs=$nm_file_list_spec$func_to_tool_file_result - func_append delfiles " $output" - func_verbose "creating $NM input file list: $output" - for obj in $save_libobjs; do - func_to_tool_file "$obj" - $ECHO "$func_to_tool_file_result" - done > "$output" - eval cmd=\"$cmd1\" - func_show_eval "$cmd" 'exit $?' - output=$save_output - libobjs=$save_libobjs - skipped_export=false - else - # The command line is too long to execute in one step. - func_verbose "using reloadable object file for export list..." - skipped_export=: - # Break out early, otherwise skipped_export may be - # set to false by a later but shorter cmd. - break - fi - done - IFS="$save_ifs" - if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then - func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' - func_show_eval '$MV "${export_symbols}T" "$export_symbols"' - fi - fi - fi - - if test -n "$export_symbols" && test -n "$include_expsyms"; then - tmp_export_symbols="$export_symbols" - test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" - $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"' - fi - - if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then - # The given exports_symbols file has to be filtered, so filter it. - func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" - # FIXME: $output_objdir/$libname.filter potentially contains lots of - # 's' commands which not all seds can handle. GNU sed should be fine - # though. Also, the filter scales superlinearly with the number of - # global variables. join(1) would be nice here, but unfortunately - # isn't a blessed tool. - $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter - func_append delfiles " $export_symbols $output_objdir/$libname.filter" - export_symbols=$output_objdir/$libname.def - $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols - fi - - tmp_deplibs= - for test_deplib in $deplibs; do - case " $convenience " in - *" $test_deplib "*) ;; - *) - func_append tmp_deplibs " $test_deplib" - ;; - esac - done - deplibs="$tmp_deplibs" - - if test -n "$convenience"; then - if test -n "$whole_archive_flag_spec" && - test "$compiler_needs_object" = yes && - test -z "$libobjs"; then - # extract the archives, so we have objects to list. - # TODO: could optimize this to just extract one archive. - whole_archive_flag_spec= - fi - if test -n "$whole_archive_flag_spec"; then - save_libobjs=$libobjs - eval libobjs=\"\$libobjs $whole_archive_flag_spec\" - test "X$libobjs" = "X " && libobjs= - else - gentop="$output_objdir/${outputname}x" - func_append generated " $gentop" - - func_extract_archives $gentop $convenience - func_append libobjs " $func_extract_archives_result" - test "X$libobjs" = "X " && libobjs= - fi - fi - - if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then - eval flag=\"$thread_safe_flag_spec\" - func_append linker_flags " $flag" - fi - - # Make a backup of the uninstalled library when relinking - if test "$opt_mode" = relink; then - $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $? - fi - - # Do each of the archive commands. - if test "$module" = yes && test -n "$module_cmds" ; then - if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then - eval test_cmds=\"$module_expsym_cmds\" - cmds=$module_expsym_cmds - else - eval test_cmds=\"$module_cmds\" - cmds=$module_cmds - fi - else - if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then - eval test_cmds=\"$archive_expsym_cmds\" - cmds=$archive_expsym_cmds - else - eval test_cmds=\"$archive_cmds\" - cmds=$archive_cmds - fi - fi - - if test "X$skipped_export" != "X:" && - func_len " $test_cmds" && - len=$func_len_result && - test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then - : - else - # The command line is too long to link in one step, link piecewise - # or, if using GNU ld and skipped_export is not :, use a linker - # script. - - # Save the value of $output and $libobjs because we want to - # use them later. If we have whole_archive_flag_spec, we - # want to use save_libobjs as it was before - # whole_archive_flag_spec was expanded, because we can't - # assume the linker understands whole_archive_flag_spec. - # This may have to be revisited, in case too many - # convenience libraries get linked in and end up exceeding - # the spec. - if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then - save_libobjs=$libobjs - fi - save_output=$output - func_basename "$output" - output_la=$func_basename_result - - # Clear the reloadable object creation command queue and - # initialize k to one. - test_cmds= - concat_cmds= - objlist= - last_robj= - k=1 - - if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then - output=${output_objdir}/${output_la}.lnkscript - func_verbose "creating GNU ld script: $output" - echo 'INPUT (' > $output - for obj in $save_libobjs - do - func_to_tool_file "$obj" - $ECHO "$func_to_tool_file_result" >> $output - done - echo ')' >> $output - func_append delfiles " $output" - func_to_tool_file "$output" - output=$func_to_tool_file_result - elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then - output=${output_objdir}/${output_la}.lnk - func_verbose "creating linker input file list: $output" - : > $output - set x $save_libobjs - shift - firstobj= - if test "$compiler_needs_object" = yes; then - firstobj="$1 " - shift - fi - for obj - do - func_to_tool_file "$obj" - $ECHO "$func_to_tool_file_result" >> $output - done - func_append delfiles " $output" - func_to_tool_file "$output" - output=$firstobj\"$file_list_spec$func_to_tool_file_result\" - else - if test -n "$save_libobjs"; then - func_verbose "creating reloadable object files..." - output=$output_objdir/$output_la-${k}.$objext - eval test_cmds=\"$reload_cmds\" - func_len " $test_cmds" - len0=$func_len_result - len=$len0 - - # Loop over the list of objects to be linked. - for obj in $save_libobjs - do - func_len " $obj" - func_arith $len + $func_len_result - len=$func_arith_result - if test "X$objlist" = X || - test "$len" -lt "$max_cmd_len"; then - func_append objlist " $obj" - else - # The command $test_cmds is almost too long, add a - # command to the queue. - if test "$k" -eq 1 ; then - # The first file doesn't have a previous command to add. - reload_objs=$objlist - eval concat_cmds=\"$reload_cmds\" - else - # All subsequent reloadable object files will link in - # the last one created. - reload_objs="$objlist $last_robj" - eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\" - fi - last_robj=$output_objdir/$output_la-${k}.$objext - func_arith $k + 1 - k=$func_arith_result - output=$output_objdir/$output_la-${k}.$objext - objlist=" $obj" - func_len " $last_robj" - func_arith $len0 + $func_len_result - len=$func_arith_result - fi - done - # Handle the remaining objects by creating one last - # reloadable object file. All subsequent reloadable object - # files will link in the last one created. - test -z "$concat_cmds" || concat_cmds=$concat_cmds~ - reload_objs="$objlist $last_robj" - eval concat_cmds=\"\${concat_cmds}$reload_cmds\" - if test -n "$last_robj"; then - eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\" - fi - func_append delfiles " $output" - - else - output= - fi - - if ${skipped_export-false}; then - func_verbose "generating symbol list for \`$libname.la'" - export_symbols="$output_objdir/$libname.exp" - $opt_dry_run || $RM $export_symbols - libobjs=$output - # Append the command to create the export file. - test -z "$concat_cmds" || concat_cmds=$concat_cmds~ - eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\" - if test -n "$last_robj"; then - eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\" - fi - fi - - test -n "$save_libobjs" && - func_verbose "creating a temporary reloadable object file: $output" - - # Loop through the commands generated above and execute them. - save_ifs="$IFS"; IFS='~' - for cmd in $concat_cmds; do - IFS="$save_ifs" - $opt_silent || { - func_quote_for_expand "$cmd" - eval "func_echo $func_quote_for_expand_result" - } - $opt_dry_run || eval "$cmd" || { - lt_exit=$? - - # Restore the uninstalled library and exit - if test "$opt_mode" = relink; then - ( cd "$output_objdir" && \ - $RM "${realname}T" && \ - $MV "${realname}U" "$realname" ) - fi - - exit $lt_exit - } - done - IFS="$save_ifs" - - if test -n "$export_symbols_regex" && ${skipped_export-false}; then - func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' - func_show_eval '$MV "${export_symbols}T" "$export_symbols"' - fi - fi - - if ${skipped_export-false}; then - if test -n "$export_symbols" && test -n "$include_expsyms"; then - tmp_export_symbols="$export_symbols" - test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" - $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"' - fi - - if test -n "$orig_export_symbols"; then - # The given exports_symbols file has to be filtered, so filter it. - func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" - # FIXME: $output_objdir/$libname.filter potentially contains lots of - # 's' commands which not all seds can handle. GNU sed should be fine - # though. Also, the filter scales superlinearly with the number of - # global variables. join(1) would be nice here, but unfortunately - # isn't a blessed tool. - $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter - func_append delfiles " $export_symbols $output_objdir/$libname.filter" - export_symbols=$output_objdir/$libname.def - $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols - fi - fi - - libobjs=$output - # Restore the value of output. - output=$save_output - - if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then - eval libobjs=\"\$libobjs $whole_archive_flag_spec\" - test "X$libobjs" = "X " && libobjs= - fi - # Expand the library linking commands again to reset the - # value of $libobjs for piecewise linking. - - # Do each of the archive commands. - if test "$module" = yes && test -n "$module_cmds" ; then - if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then - cmds=$module_expsym_cmds - else - cmds=$module_cmds - fi - else - if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then - cmds=$archive_expsym_cmds - else - cmds=$archive_cmds - fi - fi - fi - - if test -n "$delfiles"; then - # Append the command to remove temporary files to $cmds. - eval cmds=\"\$cmds~\$RM $delfiles\" - fi - - # Add any objects from preloaded convenience libraries - if test -n "$dlprefiles"; then - gentop="$output_objdir/${outputname}x" - func_append generated " $gentop" - - func_extract_archives $gentop $dlprefiles - func_append libobjs " $func_extract_archives_result" - test "X$libobjs" = "X " && libobjs= - fi - - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - eval cmd=\"$cmd\" - $opt_silent || { - func_quote_for_expand "$cmd" - eval "func_echo $func_quote_for_expand_result" - } - $opt_dry_run || eval "$cmd" || { - lt_exit=$? - - # Restore the uninstalled library and exit - if test "$opt_mode" = relink; then - ( cd "$output_objdir" && \ - $RM "${realname}T" && \ - $MV "${realname}U" "$realname" ) - fi - - exit $lt_exit - } - done - IFS="$save_ifs" - - # Restore the uninstalled library and exit - if test "$opt_mode" = relink; then - $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $? - - if test -n "$convenience"; then - if test -z "$whole_archive_flag_spec"; then - func_show_eval '${RM}r "$gentop"' - fi - fi - - exit $EXIT_SUCCESS - fi - - # Create links to the real library. - for linkname in $linknames; do - if test "$realname" != "$linkname"; then - func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?' - fi - done - - # If -module or -export-dynamic was specified, set the dlname. - if test "$module" = yes || test "$export_dynamic" = yes; then - # On all known operating systems, these are identical. - dlname="$soname" - fi - fi - ;; - - obj) - if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then - func_warning "\`-dlopen' is ignored for objects" - fi - - case " $deplibs" in - *\ -l* | *\ -L*) - func_warning "\`-l' and \`-L' are ignored for objects" ;; - esac - - test -n "$rpath" && \ - func_warning "\`-rpath' is ignored for objects" - - test -n "$xrpath" && \ - func_warning "\`-R' is ignored for objects" - - test -n "$vinfo" && \ - func_warning "\`-version-info' is ignored for objects" - - test -n "$release" && \ - func_warning "\`-release' is ignored for objects" - - case $output in - *.lo) - test -n "$objs$old_deplibs" && \ - func_fatal_error "cannot build library object \`$output' from non-libtool objects" - - libobj=$output - func_lo2o "$libobj" - obj=$func_lo2o_result - ;; - *) - libobj= - obj="$output" - ;; - esac - - # Delete the old objects. - $opt_dry_run || $RM $obj $libobj - - # Objects from convenience libraries. This assumes - # single-version convenience libraries. Whenever we create - # different ones for PIC/non-PIC, this we'll have to duplicate - # the extraction. - reload_conv_objs= - gentop= - # reload_cmds runs $LD directly, so let us get rid of - # -Wl from whole_archive_flag_spec and hope we can get by with - # turning comma into space.. - wl= - - if test -n "$convenience"; then - if test -n "$whole_archive_flag_spec"; then - eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\" - reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'` - else - gentop="$output_objdir/${obj}x" - func_append generated " $gentop" - - func_extract_archives $gentop $convenience - reload_conv_objs="$reload_objs $func_extract_archives_result" - fi - fi - - # If we're not building shared, we need to use non_pic_objs - test "$build_libtool_libs" != yes && libobjs="$non_pic_objects" - - # Create the old-style object. - reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test - - output="$obj" - func_execute_cmds "$reload_cmds" 'exit $?' - - # Exit if we aren't doing a library object file. - if test -z "$libobj"; then - if test -n "$gentop"; then - func_show_eval '${RM}r "$gentop"' - fi - - exit $EXIT_SUCCESS - fi - - if test "$build_libtool_libs" != yes; then - if test -n "$gentop"; then - func_show_eval '${RM}r "$gentop"' - fi - - # Create an invalid libtool object if no PIC, so that we don't - # accidentally link it into a program. - # $show "echo timestamp > $libobj" - # $opt_dry_run || eval "echo timestamp > $libobj" || exit $? - exit $EXIT_SUCCESS - fi - - if test -n "$pic_flag" || test "$pic_mode" != default; then - # Only do commands if we really have different PIC objects. - reload_objs="$libobjs $reload_conv_objs" - output="$libobj" - func_execute_cmds "$reload_cmds" 'exit $?' - fi - - if test -n "$gentop"; then - func_show_eval '${RM}r "$gentop"' - fi - - exit $EXIT_SUCCESS - ;; - - prog) - case $host in - *cygwin*) func_stripname '' '.exe' "$output" - output=$func_stripname_result.exe;; - esac - test -n "$vinfo" && \ - func_warning "\`-version-info' is ignored for programs" - - test -n "$release" && \ - func_warning "\`-release' is ignored for programs" - - test "$preload" = yes \ - && test "$dlopen_support" = unknown \ - && test "$dlopen_self" = unknown \ - && test "$dlopen_self_static" = unknown && \ - func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support." - - case $host in - *-*-rhapsody* | *-*-darwin1.[012]) - # On Rhapsody replace the C library is the System framework - compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'` - finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'` - ;; - esac - - case $host in - *-*-darwin*) - # Don't allow lazy linking, it breaks C++ global constructors - # But is supposedly fixed on 10.4 or later (yay!). - if test "$tagname" = CXX ; then - case ${MACOSX_DEPLOYMENT_TARGET-10.0} in - 10.[0123]) - func_append compile_command " ${wl}-bind_at_load" - func_append finalize_command " ${wl}-bind_at_load" - ;; - esac - fi - # Time to change all our "foo.ltframework" stuff back to "-framework foo" - compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` - finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` - ;; - esac - - - # move library search paths that coincide with paths to not yet - # installed libraries to the beginning of the library search list - new_libs= - for path in $notinst_path; do - case " $new_libs " in - *" -L$path/$objdir "*) ;; - *) - case " $compile_deplibs " in - *" -L$path/$objdir "*) - func_append new_libs " -L$path/$objdir" ;; - esac - ;; - esac - done - for deplib in $compile_deplibs; do - case $deplib in - -L*) - case " $new_libs " in - *" $deplib "*) ;; - *) func_append new_libs " $deplib" ;; - esac - ;; - *) func_append new_libs " $deplib" ;; - esac - done - compile_deplibs="$new_libs" - - - func_append compile_command " $compile_deplibs" - func_append finalize_command " $finalize_deplibs" - - if test -n "$rpath$xrpath"; then - # If the user specified any rpath flags, then add them. - for libdir in $rpath $xrpath; do - # This is the magic to use -rpath. - case "$finalize_rpath " in - *" $libdir "*) ;; - *) func_append finalize_rpath " $libdir" ;; - esac - done - fi - - # Now hardcode the library paths - rpath= - hardcode_libdirs= - for libdir in $compile_rpath $finalize_rpath; do - if test -n "$hardcode_libdir_flag_spec"; then - if test -n "$hardcode_libdir_separator"; then - if test -z "$hardcode_libdirs"; then - hardcode_libdirs="$libdir" - else - # Just accumulate the unique libdirs. - case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in - *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) - ;; - *) - func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" - ;; - esac - fi - else - eval flag=\"$hardcode_libdir_flag_spec\" - func_append rpath " $flag" - fi - elif test -n "$runpath_var"; then - case "$perm_rpath " in - *" $libdir "*) ;; - *) func_append perm_rpath " $libdir" ;; - esac - fi - case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) - testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'` - case :$dllsearchpath: in - *":$libdir:"*) ;; - ::) dllsearchpath=$libdir;; - *) func_append dllsearchpath ":$libdir";; - esac - case :$dllsearchpath: in - *":$testbindir:"*) ;; - ::) dllsearchpath=$testbindir;; - *) func_append dllsearchpath ":$testbindir";; - esac - ;; - esac - done - # Substitute the hardcoded libdirs into the rpath. - if test -n "$hardcode_libdir_separator" && - test -n "$hardcode_libdirs"; then - libdir="$hardcode_libdirs" - eval rpath=\" $hardcode_libdir_flag_spec\" - fi - compile_rpath="$rpath" - - rpath= - hardcode_libdirs= - for libdir in $finalize_rpath; do - if test -n "$hardcode_libdir_flag_spec"; then - if test -n "$hardcode_libdir_separator"; then - if test -z "$hardcode_libdirs"; then - hardcode_libdirs="$libdir" - else - # Just accumulate the unique libdirs. - case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in - *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) - ;; - *) - func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" - ;; - esac - fi - else - eval flag=\"$hardcode_libdir_flag_spec\" - func_append rpath " $flag" - fi - elif test -n "$runpath_var"; then - case "$finalize_perm_rpath " in - *" $libdir "*) ;; - *) func_append finalize_perm_rpath " $libdir" ;; - esac - fi - done - # Substitute the hardcoded libdirs into the rpath. - if test -n "$hardcode_libdir_separator" && - test -n "$hardcode_libdirs"; then - libdir="$hardcode_libdirs" - eval rpath=\" $hardcode_libdir_flag_spec\" - fi - finalize_rpath="$rpath" - - if test -n "$libobjs" && test "$build_old_libs" = yes; then - # Transform all the library objects into standard objects. - compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP` - finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP` - fi - - func_generate_dlsyms "$outputname" "@PROGRAM@" "no" - - # template prelinking step - if test -n "$prelink_cmds"; then - func_execute_cmds "$prelink_cmds" 'exit $?' - fi - - wrappers_required=yes - case $host in - *cegcc* | *mingw32ce*) - # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway. - wrappers_required=no - ;; - *cygwin* | *mingw* ) - if test "$build_libtool_libs" != yes; then - wrappers_required=no - fi - ;; - *) - if test "$need_relink" = no || test "$build_libtool_libs" != yes; then - wrappers_required=no - fi - ;; - esac - if test "$wrappers_required" = no; then - # Replace the output file specification. - compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'` - link_command="$compile_command$compile_rpath" - - # We have no uninstalled library dependencies, so finalize right now. - exit_status=0 - func_show_eval "$link_command" 'exit_status=$?' - - if test -n "$postlink_cmds"; then - func_to_tool_file "$output" - postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` - func_execute_cmds "$postlink_cmds" 'exit $?' - fi - - # Delete the generated files. - if test -f "$output_objdir/${outputname}S.${objext}"; then - func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"' - fi - - exit $exit_status - fi - - if test -n "$compile_shlibpath$finalize_shlibpath"; then - compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" - fi - if test -n "$finalize_shlibpath"; then - finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" - fi - - compile_var= - finalize_var= - if test -n "$runpath_var"; then - if test -n "$perm_rpath"; then - # We should set the runpath_var. - rpath= - for dir in $perm_rpath; do - func_append rpath "$dir:" - done - compile_var="$runpath_var=\"$rpath\$$runpath_var\" " - fi - if test -n "$finalize_perm_rpath"; then - # We should set the runpath_var. - rpath= - for dir in $finalize_perm_rpath; do - func_append rpath "$dir:" - done - finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " - fi - fi - - if test "$no_install" = yes; then - # We don't need to create a wrapper script. - link_command="$compile_var$compile_command$compile_rpath" - # Replace the output file specification. - link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'` - # Delete the old output file. - $opt_dry_run || $RM $output - # Link the executable and exit - func_show_eval "$link_command" 'exit $?' - - if test -n "$postlink_cmds"; then - func_to_tool_file "$output" - postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` - func_execute_cmds "$postlink_cmds" 'exit $?' - fi - - exit $EXIT_SUCCESS - fi - - if test "$hardcode_action" = relink; then - # Fast installation is not supported - link_command="$compile_var$compile_command$compile_rpath" - relink_command="$finalize_var$finalize_command$finalize_rpath" - - func_warning "this platform does not like uninstalled shared libraries" - func_warning "\`$output' will be relinked during installation" - else - if test "$fast_install" != no; then - link_command="$finalize_var$compile_command$finalize_rpath" - if test "$fast_install" = yes; then - relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'` - else - # fast_install is set to needless - relink_command= - fi - else - link_command="$compile_var$compile_command$compile_rpath" - relink_command="$finalize_var$finalize_command$finalize_rpath" - fi - fi - - # Replace the output file specification. - link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` - - # Delete the old output files. - $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname - - func_show_eval "$link_command" 'exit $?' - - if test -n "$postlink_cmds"; then - func_to_tool_file "$output_objdir/$outputname" - postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` - func_execute_cmds "$postlink_cmds" 'exit $?' - fi - - # Now create the wrapper script. - func_verbose "creating $output" - - # Quote the relink command for shipping. - if test -n "$relink_command"; then - # Preserve any variables that may affect compiler behavior - for var in $variables_saved_for_relink; do - if eval test -z \"\${$var+set}\"; then - relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" - elif eval var_value=\$$var; test -z "$var_value"; then - relink_command="$var=; export $var; $relink_command" - else - func_quote_for_eval "$var_value" - relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" - fi - done - relink_command="(cd `pwd`; $relink_command)" - relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` - fi - - # Only actually do things if not in dry run mode. - $opt_dry_run || { - # win32 will think the script is a binary if it has - # a .exe suffix, so we strip it off here. - case $output in - *.exe) func_stripname '' '.exe' "$output" - output=$func_stripname_result ;; - esac - # test for cygwin because mv fails w/o .exe extensions - case $host in - *cygwin*) - exeext=.exe - func_stripname '' '.exe' "$outputname" - outputname=$func_stripname_result ;; - *) exeext= ;; - esac - case $host in - *cygwin* | *mingw* ) - func_dirname_and_basename "$output" "" "." - output_name=$func_basename_result - output_path=$func_dirname_result - cwrappersource="$output_path/$objdir/lt-$output_name.c" - cwrapper="$output_path/$output_name.exe" - $RM $cwrappersource $cwrapper - trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 - - func_emit_cwrapperexe_src > $cwrappersource - - # The wrapper executable is built using the $host compiler, - # because it contains $host paths and files. If cross- - # compiling, it, like the target executable, must be - # executed on the $host or under an emulation environment. - $opt_dry_run || { - $LTCC $LTCFLAGS -o $cwrapper $cwrappersource - $STRIP $cwrapper - } - - # Now, create the wrapper script for func_source use: - func_ltwrapper_scriptname $cwrapper - $RM $func_ltwrapper_scriptname_result - trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15 - $opt_dry_run || { - # note: this script will not be executed, so do not chmod. - if test "x$build" = "x$host" ; then - $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result - else - func_emit_wrapper no > $func_ltwrapper_scriptname_result - fi - } - ;; - * ) - $RM $output - trap "$RM $output; exit $EXIT_FAILURE" 1 2 15 - - func_emit_wrapper no > $output - chmod +x $output - ;; - esac - } - exit $EXIT_SUCCESS - ;; - esac - - # See if we need to build an old-fashioned archive. - for oldlib in $oldlibs; do - - if test "$build_libtool_libs" = convenience; then - oldobjs="$libobjs_save $symfileobj" - addlibs="$convenience" - build_libtool_libs=no - else - if test "$build_libtool_libs" = module; then - oldobjs="$libobjs_save" - build_libtool_libs=no - else - oldobjs="$old_deplibs $non_pic_objects" - if test "$preload" = yes && test -f "$symfileobj"; then - func_append oldobjs " $symfileobj" - fi - fi - addlibs="$old_convenience" - fi - - if test -n "$addlibs"; then - gentop="$output_objdir/${outputname}x" - func_append generated " $gentop" - - func_extract_archives $gentop $addlibs - func_append oldobjs " $func_extract_archives_result" - fi - - # Do each command in the archive commands. - if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then - cmds=$old_archive_from_new_cmds - else - - # Add any objects from preloaded convenience libraries - if test -n "$dlprefiles"; then - gentop="$output_objdir/${outputname}x" - func_append generated " $gentop" - - func_extract_archives $gentop $dlprefiles - func_append oldobjs " $func_extract_archives_result" - fi - - # POSIX demands no paths to be encoded in archives. We have - # to avoid creating archives with duplicate basenames if we - # might have to extract them afterwards, e.g., when creating a - # static archive out of a convenience library, or when linking - # the entirety of a libtool archive into another (currently - # not supported by libtool). - if (for obj in $oldobjs - do - func_basename "$obj" - $ECHO "$func_basename_result" - done | sort | sort -uc >/dev/null 2>&1); then - : - else - echo "copying selected object files to avoid basename conflicts..." - gentop="$output_objdir/${outputname}x" - func_append generated " $gentop" - func_mkdir_p "$gentop" - save_oldobjs=$oldobjs - oldobjs= - counter=1 - for obj in $save_oldobjs - do - func_basename "$obj" - objbase="$func_basename_result" - case " $oldobjs " in - " ") oldobjs=$obj ;; - *[\ /]"$objbase "*) - while :; do - # Make sure we don't pick an alternate name that also - # overlaps. - newobj=lt$counter-$objbase - func_arith $counter + 1 - counter=$func_arith_result - case " $oldobjs " in - *[\ /]"$newobj "*) ;; - *) if test ! -f "$gentop/$newobj"; then break; fi ;; - esac - done - func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj" - func_append oldobjs " $gentop/$newobj" - ;; - *) func_append oldobjs " $obj" ;; - esac - done - fi - func_to_tool_file "$oldlib" func_convert_file_msys_to_w32 - tool_oldlib=$func_to_tool_file_result - eval cmds=\"$old_archive_cmds\" - - func_len " $cmds" - len=$func_len_result - if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then - cmds=$old_archive_cmds - elif test -n "$archiver_list_spec"; then - func_verbose "using command file archive linking..." - for obj in $oldobjs - do - func_to_tool_file "$obj" - $ECHO "$func_to_tool_file_result" - done > $output_objdir/$libname.libcmd - func_to_tool_file "$output_objdir/$libname.libcmd" - oldobjs=" $archiver_list_spec$func_to_tool_file_result" - cmds=$old_archive_cmds - else - # the command line is too long to link in one step, link in parts - func_verbose "using piecewise archive linking..." - save_RANLIB=$RANLIB - RANLIB=: - objlist= - concat_cmds= - save_oldobjs=$oldobjs - oldobjs= - # Is there a better way of finding the last object in the list? - for obj in $save_oldobjs - do - last_oldobj=$obj - done - eval test_cmds=\"$old_archive_cmds\" - func_len " $test_cmds" - len0=$func_len_result - len=$len0 - for obj in $save_oldobjs - do - func_len " $obj" - func_arith $len + $func_len_result - len=$func_arith_result - func_append objlist " $obj" - if test "$len" -lt "$max_cmd_len"; then - : - else - # the above command should be used before it gets too long - oldobjs=$objlist - if test "$obj" = "$last_oldobj" ; then - RANLIB=$save_RANLIB - fi - test -z "$concat_cmds" || concat_cmds=$concat_cmds~ - eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\" - objlist= - len=$len0 - fi - done - RANLIB=$save_RANLIB - oldobjs=$objlist - if test "X$oldobjs" = "X" ; then - eval cmds=\"\$concat_cmds\" - else - eval cmds=\"\$concat_cmds~\$old_archive_cmds\" - fi - fi - fi - func_execute_cmds "$cmds" 'exit $?' - done - - test -n "$generated" && \ - func_show_eval "${RM}r$generated" - - # Now create the libtool archive. - case $output in - *.la) - old_library= - test "$build_old_libs" = yes && old_library="$libname.$libext" - func_verbose "creating $output" - - # Preserve any variables that may affect compiler behavior - for var in $variables_saved_for_relink; do - if eval test -z \"\${$var+set}\"; then - relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" - elif eval var_value=\$$var; test -z "$var_value"; then - relink_command="$var=; export $var; $relink_command" - else - func_quote_for_eval "$var_value" - relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" - fi - done - # Quote the link command for shipping. - relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" - relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` - if test "$hardcode_automatic" = yes ; then - relink_command= - fi - - # Only create the output if not a dry run. - $opt_dry_run || { - for installed in no yes; do - if test "$installed" = yes; then - if test -z "$install_libdir"; then - break - fi - output="$output_objdir/$outputname"i - # Replace all uninstalled libtool libraries with the installed ones - newdependency_libs= - for deplib in $dependency_libs; do - case $deplib in - *.la) - func_basename "$deplib" - name="$func_basename_result" - func_resolve_sysroot "$deplib" - eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result` - test -z "$libdir" && \ - func_fatal_error "\`$deplib' is not a valid libtool archive" - func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name" - ;; - -L*) - func_stripname -L '' "$deplib" - func_replace_sysroot "$func_stripname_result" - func_append newdependency_libs " -L$func_replace_sysroot_result" - ;; - -R*) - func_stripname -R '' "$deplib" - func_replace_sysroot "$func_stripname_result" - func_append newdependency_libs " -R$func_replace_sysroot_result" - ;; - *) func_append newdependency_libs " $deplib" ;; - esac - done - dependency_libs="$newdependency_libs" - newdlfiles= - - for lib in $dlfiles; do - case $lib in - *.la) - func_basename "$lib" - name="$func_basename_result" - eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` - test -z "$libdir" && \ - func_fatal_error "\`$lib' is not a valid libtool archive" - func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name" - ;; - *) func_append newdlfiles " $lib" ;; - esac - done - dlfiles="$newdlfiles" - newdlprefiles= - for lib in $dlprefiles; do - case $lib in - *.la) - # Only pass preopened files to the pseudo-archive (for - # eventual linking with the app. that links it) if we - # didn't already link the preopened objects directly into - # the library: - func_basename "$lib" - name="$func_basename_result" - eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` - test -z "$libdir" && \ - func_fatal_error "\`$lib' is not a valid libtool archive" - func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name" - ;; - esac - done - dlprefiles="$newdlprefiles" - else - newdlfiles= - for lib in $dlfiles; do - case $lib in - [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; - *) abs=`pwd`"/$lib" ;; - esac - func_append newdlfiles " $abs" - done - dlfiles="$newdlfiles" - newdlprefiles= - for lib in $dlprefiles; do - case $lib in - [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; - *) abs=`pwd`"/$lib" ;; - esac - func_append newdlprefiles " $abs" - done - dlprefiles="$newdlprefiles" - fi - $RM $output - # place dlname in correct position for cygwin - # In fact, it would be nice if we could use this code for all target - # systems that can't hard-code library paths into their executables - # and that have no shared library path variable independent of PATH, - # but it turns out we can't easily determine that from inspecting - # libtool variables, so we have to hard-code the OSs to which it - # applies here; at the moment, that means platforms that use the PE - # object format with DLL files. See the long comment at the top of - # tests/bindir.at for full details. - tdlname=$dlname - case $host,$output,$installed,$module,$dlname in - *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) - # If a -bindir argument was supplied, place the dll there. - if test "x$bindir" != x ; - then - func_relative_path "$install_libdir" "$bindir" - tdlname=$func_relative_path_result$dlname - else - # Otherwise fall back on heuristic. - tdlname=../bin/$dlname - fi - ;; - esac - $ECHO > $output "\ -# $outputname - a libtool library file -# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION -# -# Please DO NOT delete this file! -# It is necessary for linking the library. - -# The name that we can dlopen(3). -dlname='$tdlname' - -# Names of this library. -library_names='$library_names' - -# The name of the static archive. -old_library='$old_library' - -# Linker flags that can not go in dependency_libs. -inherited_linker_flags='$new_inherited_linker_flags' - -# Libraries that this one depends upon. -dependency_libs='$dependency_libs' - -# Names of additional weak libraries provided by this library -weak_library_names='$weak_libs' - -# Version information for $libname. -current=$current -age=$age -revision=$revision - -# Is this an already installed library? -installed=$installed - -# Should we warn about portability when linking against -modules? -shouldnotlink=$module - -# Files to dlopen/dlpreopen -dlopen='$dlfiles' -dlpreopen='$dlprefiles' - -# Directory that this library needs to be installed in: -libdir='$install_libdir'" - if test "$installed" = no && test "$need_relink" = yes; then - $ECHO >> $output "\ -relink_command=\"$relink_command\"" - fi - done - } - - # Do a symbolic link so that the libtool archive can be found in - # LD_LIBRARY_PATH before the program is installed. - func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?' - ;; - esac - exit $EXIT_SUCCESS -} - -{ test "$opt_mode" = link || test "$opt_mode" = relink; } && - func_mode_link ${1+"$@"} - - -# func_mode_uninstall arg... -func_mode_uninstall () -{ - $opt_debug - RM="$nonopt" - files= - rmforce= - exit_status=0 - - # This variable tells wrapper scripts just to set variables rather - # than running their programs. - libtool_install_magic="$magic" - - for arg - do - case $arg in - -f) func_append RM " $arg"; rmforce=yes ;; - -*) func_append RM " $arg" ;; - *) func_append files " $arg" ;; - esac - done - - test -z "$RM" && \ - func_fatal_help "you must specify an RM program" - - rmdirs= - - for file in $files; do - func_dirname "$file" "" "." - dir="$func_dirname_result" - if test "X$dir" = X.; then - odir="$objdir" - else - odir="$dir/$objdir" - fi - func_basename "$file" - name="$func_basename_result" - test "$opt_mode" = uninstall && odir="$dir" - - # Remember odir for removal later, being careful to avoid duplicates - if test "$opt_mode" = clean; then - case " $rmdirs " in - *" $odir "*) ;; - *) func_append rmdirs " $odir" ;; - esac - fi - - # Don't error if the file doesn't exist and rm -f was used. - if { test -L "$file"; } >/dev/null 2>&1 || - { test -h "$file"; } >/dev/null 2>&1 || - test -f "$file"; then - : - elif test -d "$file"; then - exit_status=1 - continue - elif test "$rmforce" = yes; then - continue - fi - - rmfiles="$file" - - case $name in - *.la) - # Possibly a libtool archive, so verify it. - if func_lalib_p "$file"; then - func_source $dir/$name - - # Delete the libtool libraries and symlinks. - for n in $library_names; do - func_append rmfiles " $odir/$n" - done - test -n "$old_library" && func_append rmfiles " $odir/$old_library" - - case "$opt_mode" in - clean) - case " $library_names " in - *" $dlname "*) ;; - *) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;; - esac - test -n "$libdir" && func_append rmfiles " $odir/$name $odir/${name}i" - ;; - uninstall) - if test -n "$library_names"; then - # Do each command in the postuninstall commands. - func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' - fi - - if test -n "$old_library"; then - # Do each command in the old_postuninstall commands. - func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' - fi - # FIXME: should reinstall the best remaining shared library. - ;; - esac - fi - ;; - - *.lo) - # Possibly a libtool object, so verify it. - if func_lalib_p "$file"; then - - # Read the .lo file - func_source $dir/$name - - # Add PIC object to the list of files to remove. - if test -n "$pic_object" && - test "$pic_object" != none; then - func_append rmfiles " $dir/$pic_object" - fi - - # Add non-PIC object to the list of files to remove. - if test -n "$non_pic_object" && - test "$non_pic_object" != none; then - func_append rmfiles " $dir/$non_pic_object" - fi - fi - ;; - - *) - if test "$opt_mode" = clean ; then - noexename=$name - case $file in - *.exe) - func_stripname '' '.exe' "$file" - file=$func_stripname_result - func_stripname '' '.exe' "$name" - noexename=$func_stripname_result - # $file with .exe has already been added to rmfiles, - # add $file without .exe - func_append rmfiles " $file" - ;; - esac - # Do a test to see if this is a libtool program. - if func_ltwrapper_p "$file"; then - if func_ltwrapper_executable_p "$file"; then - func_ltwrapper_scriptname "$file" - relink_command= - func_source $func_ltwrapper_scriptname_result - func_append rmfiles " $func_ltwrapper_scriptname_result" - else - relink_command= - func_source $dir/$noexename - fi - - # note $name still contains .exe if it was in $file originally - # as does the version of $file that was added into $rmfiles - func_append rmfiles " $odir/$name $odir/${name}S.${objext}" - if test "$fast_install" = yes && test -n "$relink_command"; then - func_append rmfiles " $odir/lt-$name" - fi - if test "X$noexename" != "X$name" ; then - func_append rmfiles " $odir/lt-${noexename}.c" - fi - fi - fi - ;; - esac - func_show_eval "$RM $rmfiles" 'exit_status=1' - done - - # Try to remove the ${objdir}s in the directories where we deleted files - for dir in $rmdirs; do - if test -d "$dir"; then - func_show_eval "rmdir $dir >/dev/null 2>&1" - fi - done - - exit $exit_status -} - -{ test "$opt_mode" = uninstall || test "$opt_mode" = clean; } && - func_mode_uninstall ${1+"$@"} - -test -z "$opt_mode" && { - help="$generic_help" - func_fatal_help "you must specify a MODE" -} - -test -z "$exec_cmd" && \ - func_fatal_help "invalid operation mode \`$opt_mode'" - -if test -n "$exec_cmd"; then - eval exec "$exec_cmd" - exit $EXIT_FAILURE -fi - -exit $exit_status - - -# The TAGs below are defined such that we never get into a situation -# in which we disable both kinds of libraries. Given conflicting -# choices, we go for a static library, that is the most portable, -# since we can't tell whether shared libraries were disabled because -# the user asked for that or because the platform doesn't support -# them. This is particularly important on AIX, because we don't -# support having both static and shared libraries enabled at the same -# time on that platform, so we default to a shared-only configuration. -# If a disable-shared tag is given, we'll fallback to a static-only -# configuration. But we'll never go from static-only to shared-only. - -# ### BEGIN LIBTOOL TAG CONFIG: disable-shared -build_libtool_libs=no -build_old_libs=yes -# ### END LIBTOOL TAG CONFIG: disable-shared - -# ### BEGIN LIBTOOL TAG CONFIG: disable-static -build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac` -# ### END LIBTOOL TAG CONFIG: disable-static - -# Local Variables: -# mode:shell-script -# sh-indentation:2 -# End: -# vi:sw=2 - diff --git a/jpeg/makcjpeg.st b/jpeg/makcjpeg.st deleted file mode 100755 index 628f533..0000000 --- a/jpeg/makcjpeg.st +++ /dev/null @@ -1,36 +0,0 @@ -; Project file for Independent JPEG Group's software -; -; This project file is for Atari ST/STE/TT systems using Pure C or Turbo C. -; Thanks to Frank Moehle, B. Setzepfandt, and Guido Vollbeding. -; -; To use this file, rename it to cjpeg.prj. -; If you are using Turbo C, change filenames beginning with "pc..." to "tc..." -; Read installation instructions before trying to make the program! -; -; -; * * * Output file * * * -cjpeg.ttp -; -; * * * COMPILER OPTIONS * * * -.C[-P] ; absolute calls -.C[-M] ; and no string merging, folks -.C[-w-cln] ; no "constant is long" warnings -.C[-w-par] ; no "parameter xxxx unused" -.C[-w-rch] ; no "unreachable code" -.C[-wsig] ; warn if significant digits may be lost -= -; * * * * List of modules * * * * -pcstart.o -cjpeg.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h,jversion.h) -cdjpeg.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) -rdswitch.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) -rdppm.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) -rdgif.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) -rdtarga.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) -rdbmp.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) -rdrle.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) -libjpeg.lib ; built by libjpeg.prj -pcfltlib.lib ; floating point library -; the float library can be omitted if you've turned off DCT_FLOAT_SUPPORTED -pcstdlib.lib ; standard library -pcextlib.lib ; extended library diff --git a/jpeg/makdjpeg.st b/jpeg/makdjpeg.st deleted file mode 100755 index 4b61404..0000000 --- a/jpeg/makdjpeg.st +++ /dev/null @@ -1,36 +0,0 @@ -; Project file for Independent JPEG Group's software -; -; This project file is for Atari ST/STE/TT systems using Pure C or Turbo C. -; Thanks to Frank Moehle, B. Setzepfandt, and Guido Vollbeding. -; -; To use this file, rename it to djpeg.prj. -; If you are using Turbo C, change filenames beginning with "pc..." to "tc..." -; Read installation instructions before trying to make the program! -; -; -; * * * Output file * * * -djpeg.ttp -; -; * * * COMPILER OPTIONS * * * -.C[-P] ; absolute calls -.C[-M] ; and no string merging, folks -.C[-w-cln] ; no "constant is long" warnings -.C[-w-par] ; no "parameter xxxx unused" -.C[-w-rch] ; no "unreachable code" -.C[-wsig] ; warn if significant digits may be lost -= -; * * * * List of modules * * * * -pcstart.o -djpeg.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h,jversion.h) -cdjpeg.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) -rdcolmap.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) -wrppm.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) -wrgif.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) -wrtarga.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) -wrbmp.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) -wrrle.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) -libjpeg.lib ; built by libjpeg.prj -pcfltlib.lib ; floating point library -; the float library can be omitted if you've turned off DCT_FLOAT_SUPPORTED -pcstdlib.lib ; standard library -pcextlib.lib ; extended library diff --git a/jpeg/makeadsw.vc6 b/jpeg/makeadsw.vc6 deleted file mode 100755 index b44838f..0000000 --- a/jpeg/makeadsw.vc6 +++ /dev/null @@ -1,77 +0,0 @@ -Microsoft Developer Studio Workspace File, Format Version 6.00 -# WARNUNG: DIESE ARBEITSBEREICHSDATEI DARF NICHT BEARBEITET ODER GELÖSCHT WERDEN! - -############################################################################### - -Project: "cjpeg"=".\cjpeg.dsp" - Package Owner=<4> - -Package=<5> -{{{ -}}} - -Package=<4> -{{{ -}}} - -############################################################################### - -Project: "djpeg"=".\djpeg.dsp" - Package Owner=<4> - -Package=<5> -{{{ -}}} - -Package=<4> -{{{ -}}} - -############################################################################### - -Project: "jpegtran"=".\jpegtran.dsp" - Package Owner=<4> - -Package=<5> -{{{ -}}} - -Package=<4> -{{{ -}}} - -############################################################################### - -Project: "rdjpgcom"=".\rdjpgcom.dsp" - Package Owner=<4> - -Package=<5> -{{{ -}}} - -Package=<4> -{{{ -}}} - -############################################################################### - -Project: "wrjpgcom"=".\wrjpgcom.dsp" - Package Owner=<4> - -Package=<5> -{{{ -}}} - -Package=<4> -{{{ -}}} - -############################################################################### - -Global: - -Package=<5> -{{{ -}}} - -Package=<3> -{{{ -}}} - -############################################################################### - diff --git a/jpeg/makeasln.v10 b/jpeg/makeasln.v10 deleted file mode 100755 index ab96a9f..0000000 --- a/jpeg/makeasln.v10 +++ /dev/null @@ -1,33 +0,0 @@ - -Microsoft Visual Studio Solution File, Format Version 11.00 -# Visual C++ Express 2010 -Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "cjpeg", "cjpeg.vcxproj", "{2E7FAAD9-2F58-4BDE-81F2-1D6D3FB8BF57}" -EndProject -Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "djpeg", "djpeg.vcxproj", "{11043137-B453-4DFA-9010-4D2B9DC1545C}" -EndProject -Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "jpegtran", "jpegtran.vcxproj", "{025BAC50-51B5-4FFE-BC47-3F920BB4047E}" -EndProject -Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "rdjpgcom", "rdjpgcom.vcxproj", "{C81513DB-78DC-46BC-BC98-82E745203976}" -EndProject -Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "wrjpgcom", "wrjpgcom.vcxproj", "{B57065D4-DDDA-4668-BAF5-2D49270C973C}" -EndProject -Global - GlobalSection(SolutionConfigurationPlatforms) = preSolution - Release|Win32 = Release|Win32 - EndGlobalSection - GlobalSection(ProjectConfigurationPlatforms) = postSolution - {2E7FAAD9-2F58-4BDE-81F2-1D6D3FB8BF57}.Release|Win32.ActiveCfg = Release|Win32 - {2E7FAAD9-2F58-4BDE-81F2-1D6D3FB8BF57}.Release|Win32.Build.0 = Release|Win32 - {11043137-B453-4DFA-9010-4D2B9DC1545C}.Release|Win32.ActiveCfg = Release|Win32 - {11043137-B453-4DFA-9010-4D2B9DC1545C}.Release|Win32.Build.0 = Release|Win32 - {025BAC50-51B5-4FFE-BC47-3F920BB4047E}.Release|Win32.ActiveCfg = Release|Win32 - {025BAC50-51B5-4FFE-BC47-3F920BB4047E}.Release|Win32.Build.0 = Release|Win32 - {C81513DB-78DC-46BC-BC98-82E745203976}.Release|Win32.ActiveCfg = Release|Win32 - {C81513DB-78DC-46BC-BC98-82E745203976}.Release|Win32.Build.0 = Release|Win32 - {B57065D4-DDDA-4668-BAF5-2D49270C973C}.Release|Win32.ActiveCfg = Release|Win32 - {B57065D4-DDDA-4668-BAF5-2D49270C973C}.Release|Win32.Build.0 = Release|Win32 - EndGlobalSection - GlobalSection(SolutionProperties) = preSolution - HideSolutionNode = FALSE - EndGlobalSection -EndGlobal diff --git a/jpeg/makecdep.vc6 b/jpeg/makecdep.vc6 deleted file mode 100755 index 32443db..0000000 --- a/jpeg/makecdep.vc6 +++ /dev/null @@ -1,82 +0,0 @@ -# Microsoft Developer Studio erstellte Abhängigkeitsdatei, einbezogen von cjpeg.mak - -.\cdjpeg.c : \ - ".\cderror.h"\ - ".\cdjpeg.h"\ - ".\jconfig.h"\ - ".\jerror.h"\ - ".\jinclude.h"\ - ".\jmorecfg.h"\ - ".\jpeglib.h"\ - - -.\cjpeg.c : \ - ".\cderror.h"\ - ".\cdjpeg.h"\ - ".\jconfig.h"\ - ".\jerror.h"\ - ".\jinclude.h"\ - ".\jmorecfg.h"\ - ".\jpeglib.h"\ - ".\jversion.h"\ - - -.\rdbmp.c : \ - ".\cderror.h"\ - ".\cdjpeg.h"\ - ".\jconfig.h"\ - ".\jerror.h"\ - ".\jinclude.h"\ - ".\jmorecfg.h"\ - ".\jpeglib.h"\ - - -.\rdgif.c : \ - ".\cderror.h"\ - ".\cdjpeg.h"\ - ".\jconfig.h"\ - ".\jerror.h"\ - ".\jinclude.h"\ - ".\jmorecfg.h"\ - ".\jpeglib.h"\ - - -.\rdppm.c : \ - ".\cderror.h"\ - ".\cdjpeg.h"\ - ".\jconfig.h"\ - ".\jerror.h"\ - ".\jinclude.h"\ - ".\jmorecfg.h"\ - ".\jpeglib.h"\ - - -.\rdrle.c : \ - ".\cderror.h"\ - ".\cdjpeg.h"\ - ".\jconfig.h"\ - ".\jerror.h"\ - ".\jinclude.h"\ - ".\jmorecfg.h"\ - ".\jpeglib.h"\ - - -.\rdswitch.c : \ - ".\cderror.h"\ - ".\cdjpeg.h"\ - ".\jconfig.h"\ - ".\jerror.h"\ - ".\jinclude.h"\ - ".\jmorecfg.h"\ - ".\jpeglib.h"\ - - -.\rdtarga.c : \ - ".\cderror.h"\ - ".\cdjpeg.h"\ - ".\jconfig.h"\ - ".\jerror.h"\ - ".\jinclude.h"\ - ".\jmorecfg.h"\ - ".\jpeglib.h"\ - diff --git a/jpeg/makecdsp.vc6 b/jpeg/makecdsp.vc6 deleted file mode 100755 index 2cc2f8a..0000000 --- a/jpeg/makecdsp.vc6 +++ /dev/null @@ -1,130 +0,0 @@ -# Microsoft Developer Studio Project File - Name="cjpeg" - Package Owner=<4> -# Microsoft Developer Studio Generated Build File, Format Version 6.00 -# ** NICHT BEARBEITEN ** - -# TARGTYPE "Win32 (x86) Console Application" 0x0103 - -CFG=cjpeg - Win32 -!MESSAGE Dies ist kein gültiges Makefile. Zum Erstellen dieses Projekts mit NMAKE -!MESSAGE verwenden Sie den Befehl "Makefile exportieren" und führen Sie den Befehl -!MESSAGE -!MESSAGE NMAKE /f "cjpeg.mak". -!MESSAGE -!MESSAGE Sie können beim Ausführen von NMAKE eine Konfiguration angeben -!MESSAGE durch Definieren des Makros CFG in der Befehlszeile. Zum Beispiel: -!MESSAGE -!MESSAGE NMAKE /f "cjpeg.mak" CFG="cjpeg - Win32" -!MESSAGE -!MESSAGE Für die Konfiguration stehen zur Auswahl: -!MESSAGE -!MESSAGE "cjpeg - Win32" (basierend auf "Win32 (x86) Console Application") -!MESSAGE - -# Begin Project -# PROP AllowPerConfigDependencies 0 -# PROP Scc_ProjName "" -# PROP Scc_LocalPath "" -CPP=cl.exe -RSC=rc.exe -# PROP BASE Use_MFC 0 -# PROP BASE Use_Debug_Libraries 0 -# PROP BASE Output_Dir ".\cjpeg\Release" -# PROP BASE Intermediate_Dir ".\cjpeg\Release" -# PROP BASE Target_Dir ".\cjpeg" -# PROP Use_MFC 0 -# PROP Use_Debug_Libraries 0 -# PROP Output_Dir ".\cjpeg\Release" -# PROP Intermediate_Dir ".\cjpeg\Release" -# PROP Ignore_Export_Lib 0 -# PROP Target_Dir ".\cjpeg" -# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /c -# ADD CPP /nologo /G6 /MT /W3 /GX /Ox /Oa /Ob2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /FD /c -# ADD BASE RSC /l 0x409 /d "NDEBUG" -# ADD RSC /l 0x409 /d "NDEBUG" -BSC32=bscmake.exe -# ADD BASE BSC32 /nologo -# ADD BSC32 /nologo -LINK32=link.exe -# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 -# ADD LINK32 Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 -# Begin Target - -# Name "cjpeg - Win32" -# Begin Group "Quellcodedateien" - -# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat;for;f90" -# Begin Source File - -SOURCE=.\cdjpeg.c -# End Source File -# Begin Source File - -SOURCE=.\cjpeg.c -# End Source File -# Begin Source File - -SOURCE=.\rdbmp.c -# End Source File -# Begin Source File - -SOURCE=.\rdgif.c -# End Source File -# Begin Source File - -SOURCE=.\rdppm.c -# End Source File -# Begin Source File - -SOURCE=.\rdrle.c -# End Source File -# Begin Source File - -SOURCE=.\rdswitch.c -# End Source File -# Begin Source File - -SOURCE=.\rdtarga.c -# End Source File -# End Group -# Begin Group "Header-Dateien" - -# PROP Default_Filter "h;hpp;hxx;hm;inl;fi;fd" -# Begin Source File - -SOURCE=.\cderror.h -# End Source File -# Begin Source File - -SOURCE=.\cdjpeg.h -# End Source File -# Begin Source File - -SOURCE=.\jconfig.h -# End Source File -# Begin Source File - -SOURCE=.\jerror.h -# End Source File -# Begin Source File - -SOURCE=.\jinclude.h -# End Source File -# Begin Source File - -SOURCE=.\jmorecfg.h -# End Source File -# Begin Source File - -SOURCE=.\jpeglib.h -# End Source File -# Begin Source File - -SOURCE=.\jversion.h -# End Source File -# End Group -# Begin Group "Ressourcendateien" - -# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;cnt;rtf;gif;jpg;jpeg;jpe" -# End Group -# End Target -# End Project diff --git a/jpeg/makecfil.v10 b/jpeg/makecfil.v10 deleted file mode 100755 index d16cb2c..0000000 --- a/jpeg/makecfil.v10 +++ /dev/null @@ -1,69 +0,0 @@ - - - - - {4FC737F1-C7A5-4376-A066-2A32D752A2FF} - cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx - - - {93995380-89BD-4b04-88EB-625FBE52EBFB} - h;hpp;hxx;hm;inl;inc;xsd - - - {67DA6AB6-F800-4c08-8B7A-83BB121AAD01} - rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav;mfcribbon-ms - - - - - Header Files - - - Header Files - - - Header Files - - - Header Files - - - Header Files - - - Header Files - - - Header Files - - - Header Files - - - - - Source Files - - - Source Files - - - Source Files - - - Source Files - - - Source Files - - - Source Files - - - Source Files - - - Source Files - - - \ No newline at end of file diff --git a/jpeg/makecmak.vc6 b/jpeg/makecmak.vc6 deleted file mode 100755 index 74a230e..0000000 --- a/jpeg/makecmak.vc6 +++ /dev/null @@ -1,159 +0,0 @@ -# Microsoft Developer Studio Generated NMAKE File, Based on cjpeg.dsp -!IF "$(CFG)" == "" -CFG=cjpeg - Win32 -!MESSAGE Keine Konfiguration angegeben. cjpeg - Win32 wird als Standard verwendet. -!ENDIF - -!IF "$(CFG)" != "cjpeg - Win32" -!MESSAGE Ungltige Konfiguration "$(CFG)" angegeben. -!MESSAGE Sie k”nnen beim Ausfhren von NMAKE eine Konfiguration angeben -!MESSAGE durch Definieren des Makros CFG in der Befehlszeile. Zum Beispiel: -!MESSAGE -!MESSAGE NMAKE /f "cjpeg.mak" CFG="cjpeg - Win32" -!MESSAGE -!MESSAGE Fr die Konfiguration stehen zur Auswahl: -!MESSAGE -!MESSAGE "cjpeg - Win32" (basierend auf "Win32 (x86) Console Application") -!MESSAGE -!ERROR Eine ungltige Konfiguration wurde angegeben. -!ENDIF - -!IF "$(OS)" == "Windows_NT" -NULL= -!ELSE -NULL=nul -!ENDIF - -CPP=cl.exe -RSC=rc.exe -OUTDIR=.\cjpeg\Release -INTDIR=.\cjpeg\Release -# Begin Custom Macros -OutDir=.\cjpeg\Release -# End Custom Macros - -ALL : "$(OUTDIR)\cjpeg.exe" - - -CLEAN : - -@erase "$(INTDIR)\cdjpeg.obj" - -@erase "$(INTDIR)\cjpeg.obj" - -@erase "$(INTDIR)\rdbmp.obj" - -@erase "$(INTDIR)\rdgif.obj" - -@erase "$(INTDIR)\rdppm.obj" - -@erase "$(INTDIR)\rdrle.obj" - -@erase "$(INTDIR)\rdswitch.obj" - -@erase "$(INTDIR)\rdtarga.obj" - -@erase "$(INTDIR)\vc60.idb" - -@erase "$(OUTDIR)\cjpeg.exe" - -"$(OUTDIR)" : - if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)" - -BSC32=bscmake.exe -BSC32_FLAGS=/nologo /o"$(OUTDIR)\cjpeg.bsc" -BSC32_SBRS= \ - -LINK32=link.exe -LINK32_FLAGS=Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /incremental:no /pdb:"$(OUTDIR)\cjpeg.pdb" /machine:I386 /out:"$(OUTDIR)\cjpeg.exe" -LINK32_OBJS= \ - "$(INTDIR)\cdjpeg.obj" \ - "$(INTDIR)\cjpeg.obj" \ - "$(INTDIR)\rdbmp.obj" \ - "$(INTDIR)\rdgif.obj" \ - "$(INTDIR)\rdppm.obj" \ - "$(INTDIR)\rdrle.obj" \ - "$(INTDIR)\rdswitch.obj" \ - "$(INTDIR)\rdtarga.obj" - -"$(OUTDIR)\cjpeg.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS) - $(LINK32) @<< - $(LINK32_FLAGS) $(LINK32_OBJS) -<< - -CPP_PROJ=/nologo /G6 /MT /W3 /GX /Ox /Oa /Ob2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /Fp"$(INTDIR)\cjpeg.pch" /YX /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /c - -.c{$(INTDIR)}.obj:: - $(CPP) @<< - $(CPP_PROJ) $< -<< - -.cpp{$(INTDIR)}.obj:: - $(CPP) @<< - $(CPP_PROJ) $< -<< - -.cxx{$(INTDIR)}.obj:: - $(CPP) @<< - $(CPP_PROJ) $< -<< - -.c{$(INTDIR)}.sbr:: - $(CPP) @<< - $(CPP_PROJ) $< -<< - -.cpp{$(INTDIR)}.sbr:: - $(CPP) @<< - $(CPP_PROJ) $< -<< - -.cxx{$(INTDIR)}.sbr:: - $(CPP) @<< - $(CPP_PROJ) $< -<< - - -!IF "$(NO_EXTERNAL_DEPS)" != "1" -!IF EXISTS("cjpeg.dep") -!INCLUDE "cjpeg.dep" -!ELSE -!MESSAGE Warning: cannot find "cjpeg.dep" -!ENDIF -!ENDIF - - -!IF "$(CFG)" == "cjpeg - Win32" -SOURCE=.\cdjpeg.c - -"$(INTDIR)\cdjpeg.obj" : $(SOURCE) "$(INTDIR)" - - -SOURCE=.\cjpeg.c - -"$(INTDIR)\cjpeg.obj" : $(SOURCE) "$(INTDIR)" - - -SOURCE=.\rdbmp.c - -"$(INTDIR)\rdbmp.obj" : $(SOURCE) "$(INTDIR)" - - -SOURCE=.\rdgif.c - -"$(INTDIR)\rdgif.obj" : $(SOURCE) "$(INTDIR)" - - -SOURCE=.\rdppm.c - -"$(INTDIR)\rdppm.obj" : $(SOURCE) "$(INTDIR)" - - -SOURCE=.\rdrle.c - -"$(INTDIR)\rdrle.obj" : $(SOURCE) "$(INTDIR)" - - -SOURCE=.\rdswitch.c - -"$(INTDIR)\rdswitch.obj" : $(SOURCE) "$(INTDIR)" - - -SOURCE=.\rdtarga.c - -"$(INTDIR)\rdtarga.obj" : $(SOURCE) "$(INTDIR)" - - - -!ENDIF - diff --git a/jpeg/makecvcx.v10 b/jpeg/makecvcx.v10 deleted file mode 100755 index ed1ceef..0000000 --- a/jpeg/makecvcx.v10 +++ /dev/null @@ -1,76 +0,0 @@ - - - - - Release - Win32 - - - - {2E7FAAD9-2F58-4BDE-81F2-1D6D3FB8BF57} - Win32Proj - cjpeg - - - - Application - false - true - Unicode - - - - - - - - - - false - $(ProjectName)\$(Configuration)\ - $(ProjectName)\$(Configuration)\ - - - - Level3 - NotUsing - Full - true - false - WIN32;NDEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS - true - true - 4996 - - - Console - true - true - true - Release\jpeg.lib;kernel32.lib;user32.lib;gdi32.lib;winspool.lib;comdlg32.lib;advapi32.lib;shell32.lib;ole32.lib;oleaut32.lib;uuid.lib;odbc32.lib;odbccp32.lib;%(AdditionalDependencies) - - - - - - - - - - - - - - - - - - - - - - - - - - \ No newline at end of file diff --git a/jpeg/makeddep.vc6 b/jpeg/makeddep.vc6 deleted file mode 100755 index 4d2b3ad..0000000 --- a/jpeg/makeddep.vc6 +++ /dev/null @@ -1,82 +0,0 @@ -# Microsoft Developer Studio erstellte Abhängigkeitsdatei, einbezogen von djpeg.mak - -.\cdjpeg.c : \ - ".\cderror.h"\ - ".\cdjpeg.h"\ - ".\jconfig.h"\ - ".\jerror.h"\ - ".\jinclude.h"\ - ".\jmorecfg.h"\ - ".\jpeglib.h"\ - - -.\djpeg.c : \ - ".\cderror.h"\ - ".\cdjpeg.h"\ - ".\jconfig.h"\ - ".\jerror.h"\ - ".\jinclude.h"\ - ".\jmorecfg.h"\ - ".\jpeglib.h"\ - ".\jversion.h"\ - - -.\rdcolmap.c : \ - ".\cderror.h"\ - ".\cdjpeg.h"\ - ".\jconfig.h"\ - ".\jerror.h"\ - ".\jinclude.h"\ - ".\jmorecfg.h"\ - ".\jpeglib.h"\ - - -.\wrbmp.c : \ - ".\cderror.h"\ - ".\cdjpeg.h"\ - ".\jconfig.h"\ - ".\jerror.h"\ - ".\jinclude.h"\ - ".\jmorecfg.h"\ - ".\jpeglib.h"\ - - -.\wrgif.c : \ - ".\cderror.h"\ - ".\cdjpeg.h"\ - ".\jconfig.h"\ - ".\jerror.h"\ - ".\jinclude.h"\ - ".\jmorecfg.h"\ - ".\jpeglib.h"\ - - -.\wrppm.c : \ - ".\cderror.h"\ - ".\cdjpeg.h"\ - ".\jconfig.h"\ - ".\jerror.h"\ - ".\jinclude.h"\ - ".\jmorecfg.h"\ - ".\jpeglib.h"\ - - -.\wrrle.c : \ - ".\cderror.h"\ - ".\cdjpeg.h"\ - ".\jconfig.h"\ - ".\jerror.h"\ - ".\jinclude.h"\ - ".\jmorecfg.h"\ - ".\jpeglib.h"\ - - -.\wrtarga.c : \ - ".\cderror.h"\ - ".\cdjpeg.h"\ - ".\jconfig.h"\ - ".\jerror.h"\ - ".\jinclude.h"\ - ".\jmorecfg.h"\ - ".\jpeglib.h"\ - diff --git a/jpeg/makeddsp.vc6 b/jpeg/makeddsp.vc6 deleted file mode 100755 index 252f8c7..0000000 --- a/jpeg/makeddsp.vc6 +++ /dev/null @@ -1,130 +0,0 @@ -# Microsoft Developer Studio Project File - Name="djpeg" - Package Owner=<4> -# Microsoft Developer Studio Generated Build File, Format Version 6.00 -# ** NICHT BEARBEITEN ** - -# TARGTYPE "Win32 (x86) Console Application" 0x0103 - -CFG=djpeg - Win32 -!MESSAGE Dies ist kein gültiges Makefile. Zum Erstellen dieses Projekts mit NMAKE -!MESSAGE verwenden Sie den Befehl "Makefile exportieren" und führen Sie den Befehl -!MESSAGE -!MESSAGE NMAKE /f "djpeg.mak". -!MESSAGE -!MESSAGE Sie können beim Ausführen von NMAKE eine Konfiguration angeben -!MESSAGE durch Definieren des Makros CFG in der Befehlszeile. Zum Beispiel: -!MESSAGE -!MESSAGE NMAKE /f "djpeg.mak" CFG="djpeg - Win32" -!MESSAGE -!MESSAGE Für die Konfiguration stehen zur Auswahl: -!MESSAGE -!MESSAGE "djpeg - Win32" (basierend auf "Win32 (x86) Console Application") -!MESSAGE - -# Begin Project -# PROP AllowPerConfigDependencies 0 -# PROP Scc_ProjName "" -# PROP Scc_LocalPath "" -CPP=cl.exe -RSC=rc.exe -# PROP BASE Use_MFC 0 -# PROP BASE Use_Debug_Libraries 0 -# PROP BASE Output_Dir ".\djpeg\Release" -# PROP BASE Intermediate_Dir ".\djpeg\Release" -# PROP BASE Target_Dir ".\djpeg" -# PROP Use_MFC 0 -# PROP Use_Debug_Libraries 0 -# PROP Output_Dir ".\djpeg\Release" -# PROP Intermediate_Dir ".\djpeg\Release" -# PROP Ignore_Export_Lib 0 -# PROP Target_Dir ".\djpeg" -# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /c -# ADD CPP /nologo /G6 /MT /W3 /GX /Ox /Oa /Ob2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /FD /c -# ADD BASE RSC /l 0x409 /d "NDEBUG" -# ADD RSC /l 0x409 /d "NDEBUG" -BSC32=bscmake.exe -# ADD BASE BSC32 /nologo -# ADD BSC32 /nologo -LINK32=link.exe -# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 -# ADD LINK32 Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 -# Begin Target - -# Name "djpeg - Win32" -# Begin Group "Quellcodedateien" - -# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat;for;f90" -# Begin Source File - -SOURCE=.\cdjpeg.c -# End Source File -# Begin Source File - -SOURCE=.\djpeg.c -# End Source File -# Begin Source File - -SOURCE=.\rdcolmap.c -# End Source File -# Begin Source File - -SOURCE=.\wrbmp.c -# End Source File -# Begin Source File - -SOURCE=.\wrgif.c -# End Source File -# Begin Source File - -SOURCE=.\wrppm.c -# End Source File -# Begin Source File - -SOURCE=.\wrrle.c -# End Source File -# Begin Source File - -SOURCE=.\wrtarga.c -# End Source File -# End Group -# Begin Group "Header-Dateien" - -# PROP Default_Filter "h;hpp;hxx;hm;inl;fi;fd" -# Begin Source File - -SOURCE=.\cderror.h -# End Source File -# Begin Source File - -SOURCE=.\cdjpeg.h -# End Source File -# Begin Source File - -SOURCE=.\jconfig.h -# End Source File -# Begin Source File - -SOURCE=.\jerror.h -# End Source File -# Begin Source File - -SOURCE=.\jinclude.h -# End Source File -# Begin Source File - -SOURCE=.\jmorecfg.h -# End Source File -# Begin Source File - -SOURCE=.\jpeglib.h -# End Source File -# Begin Source File - -SOURCE=.\jversion.h -# End Source File -# End Group -# Begin Group "Ressourcendateien" - -# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;cnt;rtf;gif;jpg;jpeg;jpe" -# End Group -# End Target -# End Project diff --git a/jpeg/makedfil.v10 b/jpeg/makedfil.v10 deleted file mode 100755 index 92f321c..0000000 --- a/jpeg/makedfil.v10 +++ /dev/null @@ -1,69 +0,0 @@ - - - - - {4FC737F1-C7A5-4376-A066-2A32D752A2FF} - cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx - - - {93995380-89BD-4b04-88EB-625FBE52EBFB} - h;hpp;hxx;hm;inl;inc;xsd - - - {67DA6AB6-F800-4c08-8B7A-83BB121AAD01} - rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav;mfcribbon-ms - - - - - Header Files - - - Header Files - - - Header Files - - - Header Files - - - Header Files - - - Header Files - - - Header Files - - - Header Files - - - - - Source Files - - - Source Files - - - Source Files - - - Source Files - - - Source Files - - - Source Files - - - Source Files - - - Source Files - - - \ No newline at end of file diff --git a/jpeg/makedmak.vc6 b/jpeg/makedmak.vc6 deleted file mode 100755 index 5d7e778..0000000 --- a/jpeg/makedmak.vc6 +++ /dev/null @@ -1,159 +0,0 @@ -# Microsoft Developer Studio Generated NMAKE File, Based on djpeg.dsp -!IF "$(CFG)" == "" -CFG=djpeg - Win32 -!MESSAGE Keine Konfiguration angegeben. djpeg - Win32 wird als Standard verwendet. -!ENDIF - -!IF "$(CFG)" != "djpeg - Win32" -!MESSAGE Ungltige Konfiguration "$(CFG)" angegeben. -!MESSAGE Sie k”nnen beim Ausfhren von NMAKE eine Konfiguration angeben -!MESSAGE durch Definieren des Makros CFG in der Befehlszeile. Zum Beispiel: -!MESSAGE -!MESSAGE NMAKE /f "djpeg.mak" CFG="djpeg - Win32" -!MESSAGE -!MESSAGE Fr die Konfiguration stehen zur Auswahl: -!MESSAGE -!MESSAGE "djpeg - Win32" (basierend auf "Win32 (x86) Console Application") -!MESSAGE -!ERROR Eine ungltige Konfiguration wurde angegeben. -!ENDIF - -!IF "$(OS)" == "Windows_NT" -NULL= -!ELSE -NULL=nul -!ENDIF - -CPP=cl.exe -RSC=rc.exe -OUTDIR=.\djpeg\Release -INTDIR=.\djpeg\Release -# Begin Custom Macros -OutDir=.\djpeg\Release -# End Custom Macros - -ALL : "$(OUTDIR)\djpeg.exe" - - -CLEAN : - -@erase "$(INTDIR)\cdjpeg.obj" - -@erase "$(INTDIR)\djpeg.obj" - -@erase "$(INTDIR)\rdcolmap.obj" - -@erase "$(INTDIR)\vc60.idb" - -@erase "$(INTDIR)\wrbmp.obj" - -@erase "$(INTDIR)\wrgif.obj" - -@erase "$(INTDIR)\wrppm.obj" - -@erase "$(INTDIR)\wrrle.obj" - -@erase "$(INTDIR)\wrtarga.obj" - -@erase "$(OUTDIR)\djpeg.exe" - -"$(OUTDIR)" : - if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)" - -BSC32=bscmake.exe -BSC32_FLAGS=/nologo /o"$(OUTDIR)\djpeg.bsc" -BSC32_SBRS= \ - -LINK32=link.exe -LINK32_FLAGS=Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /incremental:no /pdb:"$(OUTDIR)\djpeg.pdb" /machine:I386 /out:"$(OUTDIR)\djpeg.exe" -LINK32_OBJS= \ - "$(INTDIR)\cdjpeg.obj" \ - "$(INTDIR)\djpeg.obj" \ - "$(INTDIR)\rdcolmap.obj" \ - "$(INTDIR)\wrbmp.obj" \ - "$(INTDIR)\wrgif.obj" \ - "$(INTDIR)\wrppm.obj" \ - "$(INTDIR)\wrrle.obj" \ - "$(INTDIR)\wrtarga.obj" - -"$(OUTDIR)\djpeg.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS) - $(LINK32) @<< - $(LINK32_FLAGS) $(LINK32_OBJS) -<< - -CPP_PROJ=/nologo /G6 /MT /W3 /GX /Ox /Oa /Ob2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /Fp"$(INTDIR)\djpeg.pch" /YX /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /c - -.c{$(INTDIR)}.obj:: - $(CPP) @<< - $(CPP_PROJ) $< -<< - -.cpp{$(INTDIR)}.obj:: - $(CPP) @<< - $(CPP_PROJ) $< -<< - -.cxx{$(INTDIR)}.obj:: - $(CPP) @<< - $(CPP_PROJ) $< -<< - -.c{$(INTDIR)}.sbr:: - $(CPP) @<< - $(CPP_PROJ) $< -<< - -.cpp{$(INTDIR)}.sbr:: - $(CPP) @<< - $(CPP_PROJ) $< -<< - -.cxx{$(INTDIR)}.sbr:: - $(CPP) @<< - $(CPP_PROJ) $< -<< - - -!IF "$(NO_EXTERNAL_DEPS)" != "1" -!IF EXISTS("djpeg.dep") -!INCLUDE "djpeg.dep" -!ELSE -!MESSAGE Warning: cannot find "djpeg.dep" -!ENDIF -!ENDIF - - -!IF "$(CFG)" == "djpeg - Win32" -SOURCE=.\cdjpeg.c - -"$(INTDIR)\cdjpeg.obj" : $(SOURCE) "$(INTDIR)" - - -SOURCE=.\djpeg.c - -"$(INTDIR)\djpeg.obj" : $(SOURCE) "$(INTDIR)" - - -SOURCE=.\rdcolmap.c - -"$(INTDIR)\rdcolmap.obj" : $(SOURCE) "$(INTDIR)" - - -SOURCE=.\wrbmp.c - -"$(INTDIR)\wrbmp.obj" : $(SOURCE) "$(INTDIR)" - - -SOURCE=.\wrgif.c - -"$(INTDIR)\wrgif.obj" : $(SOURCE) "$(INTDIR)" - - -SOURCE=.\wrppm.c - -"$(INTDIR)\wrppm.obj" : $(SOURCE) "$(INTDIR)" - - -SOURCE=.\wrrle.c - -"$(INTDIR)\wrrle.obj" : $(SOURCE) "$(INTDIR)" - - -SOURCE=.\wrtarga.c - -"$(INTDIR)\wrtarga.obj" : $(SOURCE) "$(INTDIR)" - - - -!ENDIF - diff --git a/jpeg/makedvcx.v10 b/jpeg/makedvcx.v10 deleted file mode 100755 index d3e4cbf..0000000 --- a/jpeg/makedvcx.v10 +++ /dev/null @@ -1,76 +0,0 @@ - - - - - Release - Win32 - - - - {11043137-B453-4DFA-9010-4D2B9DC1545C} - Win32Proj - djpeg - - - - Application - false - true - Unicode - - - - - - - - - - false - $(ProjectName)\$(Configuration)\ - $(ProjectName)\$(Configuration)\ - - - - Level3 - NotUsing - Full - true - false - WIN32;NDEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS - true - true - 4996 - - - Console - true - true - true - Release\jpeg.lib;kernel32.lib;user32.lib;gdi32.lib;winspool.lib;comdlg32.lib;advapi32.lib;shell32.lib;ole32.lib;oleaut32.lib;uuid.lib;odbc32.lib;odbccp32.lib;%(AdditionalDependencies) - - - - - - - - - - - - - - - - - - - - - - - - - - \ No newline at end of file diff --git a/jpeg/makefile.ansi b/jpeg/makefile.ansi deleted file mode 100755 index 7d0499f..0000000 --- a/jpeg/makefile.ansi +++ /dev/null @@ -1,221 +0,0 @@ -# Makefile for Independent JPEG Group's software - -# This makefile is suitable for Unix-like systems with ANSI-capable compilers. -# If you have a non-ANSI compiler, makefile.unix is a better starting point. - -# Read installation instructions before saying "make" !! - -# The name of your C compiler: -CC= cc - -# You may need to adjust these cc options: -CFLAGS= -O -# Generally, we recommend defining any configuration symbols in jconfig.h, -# NOT via -D switches here. - -# Link-time cc options: -LDFLAGS= - -# To link any special libraries, add the necessary -l commands here. -LDLIBS= - -# Put here the object file name for the correct system-dependent memory -# manager file. For Unix this is usually jmemnobs.o, but you may want -# to use jmemansi.o or jmemname.o if you have limited swap space. -SYSDEPMEM= jmemnobs.o - -# miscellaneous OS-dependent stuff -# linker -LN= $(CC) -# file deletion command -RM= rm -f -# library (.a) file creation command -AR= ar rc -# second step in .a creation (use "touch" if not needed) -AR2= ranlib - -# End of configurable options. - - -# source files: JPEG library proper -LIBSOURCES= jaricom.c jcapimin.c jcapistd.c jcarith.c jccoefct.c jccolor.c \ - jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c \ - jcomapi.c jcparam.c jcprepct.c jcsample.c jctrans.c jdapimin.c \ - jdapistd.c jdarith.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c \ - jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c \ - jdmerge.c jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c \ - jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c jquant1.c \ - jquant2.c jutils.c jmemmgr.c -# memmgr back ends: compile only one of these into a working library -SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c -# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom -APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \ - rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \ - rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c -SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES) -# files included by source files -INCLUDES= jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h jpegint.h \ - jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h -# documentation, test, and support files -DOCS= README install.txt usage.txt cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \ - wrjpgcom.1 wizard.txt example.c libjpeg.txt structure.txt \ - coderules.txt filelist.txt change.log -MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.bcc \ - makefile.mc6 makefile.dj makefile.wat makefile.vc makejdsw.vc6 \ - makeadsw.vc6 makejdep.vc6 makejdsp.vc6 makejmak.vc6 makecdep.vc6 \ - makecdsp.vc6 makecmak.vc6 makeddep.vc6 makeddsp.vc6 makedmak.vc6 \ - maketdep.vc6 maketdsp.vc6 maketmak.vc6 makerdep.vc6 makerdsp.vc6 \ - makermak.vc6 makewdep.vc6 makewdsp.vc6 makewmak.vc6 makejsln.v10 \ - makeasln.v10 makejvcx.v10 makejfil.v10 makecvcx.v10 makecfil.v10 \ - makedvcx.v10 makedfil.v10 maketvcx.v10 maketfil.v10 makervcx.v10 \ - makerfil.v10 makewvcx.v10 makewfil.v10 makeproj.mac makcjpeg.st \ - makdjpeg.st makljpeg.st maktjpeg.st makefile.manx makefile.sas \ - makefile.mms makefile.vms makvms.opt -CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \ - jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \ - jconfig.vms -CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp missing -OTHERFILES= jconfig.txt ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm \ - libjpeg.map -TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \ - testimgp.jpg -DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \ - $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES) -# library object files common to compression and decompression -COMOBJECTS= jaricom.o jcomapi.o jutils.o jerror.o jmemmgr.o $(SYSDEPMEM) -# compression library object files -CLIBOBJECTS= jcapimin.o jcapistd.o jcarith.o jctrans.o jcparam.o \ - jdatadst.o jcinit.o jcmaster.o jcmarker.o jcmainct.o jcprepct.o \ - jccoefct.o jccolor.o jcsample.o jchuff.o jcdctmgr.o jfdctfst.o \ - jfdctflt.o jfdctint.o -# decompression library object files -DLIBOBJECTS= jdapimin.o jdapistd.o jdarith.o jdtrans.o jdatasrc.o \ - jdmaster.o jdinput.o jdmarker.o jdhuff.o jdmainct.o \ - jdcoefct.o jdpostct.o jddctmgr.o jidctfst.o jidctflt.o \ - jidctint.o jdsample.o jdcolor.o jquant1.o jquant2.o jdmerge.o -# These objectfiles are included in libjpeg.a -LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS) -# object files for sample applications (excluding library files) -COBJECTS= cjpeg.o rdppm.o rdgif.o rdtarga.o rdrle.o rdbmp.o rdswitch.o \ - cdjpeg.o -DOBJECTS= djpeg.o wrppm.o wrgif.o wrtarga.o wrrle.o wrbmp.o rdcolmap.o \ - cdjpeg.o -TROBJECTS= jpegtran.o rdswitch.o cdjpeg.o transupp.o - - -all: libjpeg.a cjpeg djpeg jpegtran rdjpgcom wrjpgcom - -libjpeg.a: $(LIBOBJECTS) - $(RM) libjpeg.a - $(AR) libjpeg.a $(LIBOBJECTS) - $(AR2) libjpeg.a - -cjpeg: $(COBJECTS) libjpeg.a - $(LN) $(LDFLAGS) -o cjpeg $(COBJECTS) libjpeg.a $(LDLIBS) - -djpeg: $(DOBJECTS) libjpeg.a - $(LN) $(LDFLAGS) -o djpeg $(DOBJECTS) libjpeg.a $(LDLIBS) - -jpegtran: $(TROBJECTS) libjpeg.a - $(LN) $(LDFLAGS) -o jpegtran $(TROBJECTS) libjpeg.a $(LDLIBS) - -rdjpgcom: rdjpgcom.o - $(LN) $(LDFLAGS) -o rdjpgcom rdjpgcom.o $(LDLIBS) - -wrjpgcom: wrjpgcom.o - $(LN) $(LDFLAGS) -o wrjpgcom wrjpgcom.o $(LDLIBS) - -jconfig.h: jconfig.txt - echo You must prepare a system-dependent jconfig.h file. - echo Please read the installation directions in install.txt. - exit 1 - -clean: - $(RM) *.o cjpeg djpeg jpegtran libjpeg.a rdjpgcom wrjpgcom - $(RM) core testout* - -test: cjpeg djpeg jpegtran - $(RM) testout* - ./djpeg -dct int -ppm -outfile testout.ppm testorig.jpg - ./djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg - ./cjpeg -dct int -outfile testout.jpg testimg.ppm - ./djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg - ./cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm - ./jpegtran -outfile testoutt.jpg testprog.jpg - cmp testimg.ppm testout.ppm - cmp testimg.bmp testout.bmp - cmp testimg.jpg testout.jpg - cmp testimg.ppm testoutp.ppm - cmp testimgp.jpg testoutp.jpg - cmp testorig.jpg testoutt.jpg - - -jaricom.o: jaricom.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcapimin.o: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcapistd.o: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcarith.o: jcarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jccoefct.o: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jccolor.o: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcdctmgr.o: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jchuff.o: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcinit.o: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcmainct.o: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcmarker.o: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcmaster.o: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcomapi.o: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcparam.o: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcprepct.o: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcsample.o: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jctrans.o: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdapimin.o: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdapistd.o: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdarith.o: jdarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdatadst.o: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h -jdatasrc.o: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h -jdcoefct.o: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdcolor.o: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jddctmgr.o: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jdhuff.o: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdinput.o: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdmainct.o: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdmarker.o: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdmaster.o: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdmerge.o: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdpostct.o: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdsample.o: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdtrans.o: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jerror.o: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h -jfdctflt.o: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jfdctfst.o: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jfdctint.o: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jidctflt.o: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jidctfst.o: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jidctint.o: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jquant1.o: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jquant2.o: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jutils.o: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jmemmgr.o: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemansi.o: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemname.o: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemnobs.o: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemdos.o: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemmac.o: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -cjpeg.o: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h -djpeg.o: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h -jpegtran.o: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h -rdjpgcom.o: rdjpgcom.c jinclude.h jconfig.h -wrjpgcom.o: wrjpgcom.c jinclude.h jconfig.h -cdjpeg.o: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdcolmap.o: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdswitch.o: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -transupp.o: transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h -rdppm.o: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrppm.o: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdgif.o: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrgif.o: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdtarga.o: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrtarga.o: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdbmp.o: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrbmp.o: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdrle.o: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrrle.o: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h diff --git a/jpeg/makefile.bcc b/jpeg/makefile.bcc deleted file mode 100755 index d89e09b..0000000 --- a/jpeg/makefile.bcc +++ /dev/null @@ -1,292 +0,0 @@ -# Makefile for Independent JPEG Group's software - -# This makefile is suitable for Borland C on MS-DOS or OS/2. -# It works with Borland C++ for DOS, revision 3.0 or later, -# and has been tested with Borland C++ for OS/2. -# Watch out for optimization bugs in the OS/2 compilers --- see notes below! -# Thanks to Tom Wright and Ge' Weijers (original DOS) and -# Ken Porter (OS/2) for this file. - -# Read installation instructions before saying "make" !! - -# Are we under DOS or OS/2? -!if !$d(DOS) && !$d(OS2) -!if $d(__OS2__) -OS2=1 -!else -DOS=1 -!endif -!endif - -# The name of your C compiler: -CC= bcc - -# You may need to adjust these cc options: -!if $d(DOS) -CFLAGS= -O2 -mm -w-par -w-stu -w-ccc -w-rch -!else -CFLAGS= -O1 -w-par -w-stu -w-ccc -w-rch -!endif -# -O2 enables full code optimization (for pre-3.0 Borland C++, use -O -G -Z). -# -O2 is buggy in Borland OS/2 C++ revision 2.0, so use -O1 there for now. -# If you have Borland OS/2 C++ revision 1.0, use -O or no optimization at all. -# -mm selects medium memory model (near data, far code pointers; DOS only!) -# -w-par suppresses warnings about unused function parameters -# -w-stu suppresses warnings about incomplete structures -# -w-ccc suppresses warnings about compile-time-constant conditions -# -w-rch suppresses warnings about unreachable code -# Generally, we recommend defining any configuration symbols in jconfig.h, -# NOT via -D switches here. - -# Link-time cc options: -!if $d(DOS) -LDFLAGS= -mm -# memory model option here must match CFLAGS! -!else -LDFLAGS= -# -lai full-screen app -# -lc case-significant link -!endif - -# Put here the object file name for the correct system-dependent memory -# manager file. -# For DOS, we recommend jmemdos.c and jmemdosa.asm. -# For OS/2, we recommend jmemnobs.c (flat memory!) -# SYSDEPMEMLIB must list the same files with "+" signs for the librarian. -!if $d(DOS) -SYSDEPMEM= jmemdos.obj jmemdosa.obj -SYSDEPMEMLIB= +jmemdos.obj +jmemdosa.obj -!else -SYSDEPMEM= jmemnobs.obj -SYSDEPMEMLIB= +jmemnobs.obj -!endif - -# End of configurable options. - - -# source files: JPEG library proper -LIBSOURCES= jaricom.c jcapimin.c jcapistd.c jcarith.c jccoefct.c jccolor.c \ - jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c \ - jcomapi.c jcparam.c jcprepct.c jcsample.c jctrans.c jdapimin.c \ - jdapistd.c jdarith.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c \ - jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c \ - jdmerge.c jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c \ - jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c jquant1.c \ - jquant2.c jutils.c jmemmgr.c -# memmgr back ends: compile only one of these into a working library -SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c -# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom -APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \ - rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \ - rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c -SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES) -# files included by source files -INCLUDES= jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h jpegint.h \ - jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h -# documentation, test, and support files -DOCS= README install.txt usage.txt cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \ - wrjpgcom.1 wizard.txt example.c libjpeg.txt structure.txt \ - coderules.txt filelist.txt change.log -MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.bcc \ - makefile.mc6 makefile.dj makefile.wat makefile.vc makejdsw.vc6 \ - makeadsw.vc6 makejdep.vc6 makejdsp.vc6 makejmak.vc6 makecdep.vc6 \ - makecdsp.vc6 makecmak.vc6 makeddep.vc6 makeddsp.vc6 makedmak.vc6 \ - maketdep.vc6 maketdsp.vc6 maketmak.vc6 makerdep.vc6 makerdsp.vc6 \ - makermak.vc6 makewdep.vc6 makewdsp.vc6 makewmak.vc6 makejsln.v10 \ - makeasln.v10 makejvcx.v10 makejfil.v10 makecvcx.v10 makecfil.v10 \ - makedvcx.v10 makedfil.v10 maketvcx.v10 maketfil.v10 makervcx.v10 \ - makerfil.v10 makewvcx.v10 makewfil.v10 makeproj.mac makcjpeg.st \ - makdjpeg.st makljpeg.st maktjpeg.st makefile.manx makefile.sas \ - makefile.mms makefile.vms makvms.opt -CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \ - jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \ - jconfig.vms -CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp missing -OTHERFILES= jconfig.txt ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm \ - libjpeg.map -TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \ - testimgp.jpg -DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \ - $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES) -# library object files common to compression and decompression -COMOBJECTS= jaricom.obj jcomapi.obj jutils.obj jerror.obj jmemmgr.obj $(SYSDEPMEM) -# compression library object files -CLIBOBJECTS= jcapimin.obj jcapistd.obj jcarith.obj jctrans.obj jcparam.obj \ - jdatadst.obj jcinit.obj jcmaster.obj jcmarker.obj jcmainct.obj \ - jcprepct.obj jccoefct.obj jccolor.obj jcsample.obj jchuff.obj \ - jcdctmgr.obj jfdctfst.obj jfdctflt.obj jfdctint.obj -# decompression library object files -DLIBOBJECTS= jdapimin.obj jdapistd.obj jdarith.obj jdtrans.obj jdatasrc.obj \ - jdmaster.obj jdinput.obj jdmarker.obj jdhuff.obj jdmainct.obj \ - jdcoefct.obj jdpostct.obj jddctmgr.obj jidctfst.obj jidctflt.obj \ - jidctint.obj jdsample.obj jdcolor.obj jquant1.obj jquant2.obj \ - jdmerge.obj -# These objectfiles are included in libjpeg.lib -LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS) -# object files for sample applications (excluding library files) -COBJECTS= cjpeg.obj rdppm.obj rdgif.obj rdtarga.obj rdrle.obj rdbmp.obj \ - rdswitch.obj cdjpeg.obj -DOBJECTS= djpeg.obj wrppm.obj wrgif.obj wrtarga.obj wrrle.obj wrbmp.obj \ - rdcolmap.obj cdjpeg.obj -TROBJECTS= jpegtran.obj rdswitch.obj cdjpeg.obj transupp.obj - - -all: libjpeg.lib cjpeg.exe djpeg.exe jpegtran.exe rdjpgcom.exe wrjpgcom.exe - -libjpeg.lib: $(LIBOBJECTS) - - del libjpeg.lib - tlib libjpeg.lib /E /C @&&| -+jcapimin.obj +jcapistd.obj +jcarith.obj +jctrans.obj +jcparam.obj & -+jdatadst.obj +jcinit.obj +jcmaster.obj +jcmarker.obj +jcmainct.obj & -+jcprepct.obj +jccoefct.obj +jccolor.obj +jcsample.obj +jchuff.obj & -+jcdctmgr.obj +jfdctfst.obj +jfdctflt.obj +jfdctint.obj +jdapimin.obj & -+jdapistd.obj +jdarith.obj +jdtrans.obj +jdatasrc.obj +jdmaster.obj & -+jdinput.obj +jdmarker.obj +jdhuff.obj +jdmainct.obj +jdcoefct.obj & -+jdpostct.obj +jddctmgr.obj +jidctfst.obj +jidctflt.obj +jidctint.obj & -+jdsample.obj +jdcolor.obj +jquant1.obj +jquant2.obj +jdmerge.obj & -+jaricom.obj +jcomapi.obj +jutils.obj +jerror.obj +jmemmgr.obj & -$(SYSDEPMEMLIB) -| - -cjpeg.exe: $(COBJECTS) libjpeg.lib - $(CC) $(LDFLAGS) -ecjpeg.exe $(COBJECTS) libjpeg.lib - -djpeg.exe: $(DOBJECTS) libjpeg.lib - $(CC) $(LDFLAGS) -edjpeg.exe $(DOBJECTS) libjpeg.lib - -jpegtran.exe: $(TROBJECTS) libjpeg.lib - $(CC) $(LDFLAGS) -ejpegtran.exe $(TROBJECTS) libjpeg.lib - -rdjpgcom.exe: rdjpgcom.c -!if $d(DOS) - $(CC) -ms -O rdjpgcom.c -!else - $(CC) $(CFLAGS) rdjpgcom.c -!endif - -# On DOS, wrjpgcom needs large model so it can malloc a 64K chunk -wrjpgcom.exe: wrjpgcom.c -!if $d(DOS) - $(CC) -ml -O wrjpgcom.c -!else - $(CC) $(CFLAGS) wrjpgcom.c -!endif - -# This "{}" syntax allows Borland Make to "batch" source files. -# In this way, each run of the compiler can build many modules. -.c.obj: - $(CC) $(CFLAGS) -c{ $<} - -jconfig.h: jconfig.txt - echo You must prepare a system-dependent jconfig.h file. - echo Please read the installation directions in install.txt. - exit 1 - -clean: - - del *.obj - - del libjpeg.lib - - del cjpeg.exe - - del djpeg.exe - - del jpegtran.exe - - del rdjpgcom.exe - - del wrjpgcom.exe - - del testout*.* - -test: cjpeg.exe djpeg.exe jpegtran.exe - - del testout*.* - djpeg -dct int -ppm -outfile testout.ppm testorig.jpg - djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg - cjpeg -dct int -outfile testout.jpg testimg.ppm - djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg - cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm - jpegtran -outfile testoutt.jpg testprog.jpg -!if $d(DOS) - fc /b testimg.ppm testout.ppm - fc /b testimg.bmp testout.bmp - fc /b testimg.jpg testout.jpg - fc /b testimg.ppm testoutp.ppm - fc /b testimgp.jpg testoutp.jpg - fc /b testorig.jpg testoutt.jpg -!else - echo n > n.tmp - comp testimg.ppm testout.ppm < n.tmp - comp testimg.bmp testout.bmp < n.tmp - comp testimg.jpg testout.jpg < n.tmp - comp testimg.ppm testoutp.ppm < n.tmp - comp testimgp.jpg testoutp.jpg < n.tmp - comp testorig.jpg testoutt.jpg < n.tmp - del n.tmp -!endif - - -jaricom.obj: jaricom.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcapimin.obj: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcapistd.obj: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcarith.obj: jcarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jccoefct.obj: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jccolor.obj: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcdctmgr.obj: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jchuff.obj: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcinit.obj: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcmainct.obj: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcmarker.obj: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcmaster.obj: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcomapi.obj: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcparam.obj: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcprepct.obj: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcsample.obj: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jctrans.obj: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdapimin.obj: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdapistd.obj: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdarith.obj: jdarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdatadst.obj: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h -jdatasrc.obj: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h -jdcoefct.obj: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdcolor.obj: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jddctmgr.obj: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jdhuff.obj: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdinput.obj: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdmainct.obj: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdmarker.obj: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdmaster.obj: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdmerge.obj: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdpostct.obj: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdsample.obj: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdtrans.obj: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jerror.obj: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h -jfdctflt.obj: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jfdctfst.obj: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jfdctint.obj: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jidctflt.obj: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jidctfst.obj: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jidctint.obj: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jquant1.obj: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jquant2.obj: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jutils.obj: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jmemmgr.obj: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemansi.obj: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemname.obj: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemnobs.obj: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemdos.obj: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemmac.obj: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -cjpeg.obj: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h -djpeg.obj: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h -jpegtran.obj: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h -rdjpgcom.obj: rdjpgcom.c jinclude.h jconfig.h -wrjpgcom.obj: wrjpgcom.c jinclude.h jconfig.h -cdjpeg.obj: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdcolmap.obj: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdswitch.obj: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -transupp.obj: transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h -rdppm.obj: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrppm.obj: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdgif.obj: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrgif.obj: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdtarga.obj: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrtarga.obj: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdbmp.obj: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrbmp.obj: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdrle.obj: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrrle.obj: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -jmemdosa.obj: jmemdosa.asm - tasm /mx jmemdosa.asm diff --git a/jpeg/makefile.dj b/jpeg/makefile.dj deleted file mode 100755 index 37b6ee7..0000000 --- a/jpeg/makefile.dj +++ /dev/null @@ -1,227 +0,0 @@ -# Makefile for Independent JPEG Group's software - -# This makefile is for DJGPP (Delorie's GNU C port on MS-DOS), v2.0 or later. -# Thanks to Frank J. Donahoe for this version. - -# Read installation instructions before saying "make" !! - -# The name of your C compiler: -CC= gcc - -# You may need to adjust these cc options: -CFLAGS= -O2 -Wall -I. -# Generally, we recommend defining any configuration symbols in jconfig.h, -# NOT via -D switches here. - -# Link-time cc options: -LDFLAGS= -s - -# To link any special libraries, add the necessary -l commands here. -LDLIBS= - -# Put here the object file name for the correct system-dependent memory -# manager file. For DJGPP this is usually jmemnobs.o, but you could -# use jmemname.o if you want to use named temp files instead of swap space. -SYSDEPMEM= jmemnobs.o - -# miscellaneous OS-dependent stuff -# linker -LN= $(CC) -# file deletion command -RM= del -# library (.a) file creation command -AR= ar rc -# second step in .a creation (use "touch" if not needed) -AR2= ranlib - -# End of configurable options. - - -# source files: JPEG library proper -LIBSOURCES= jaricom.c jcapimin.c jcapistd.c jcarith.c jccoefct.c jccolor.c \ - jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c \ - jcomapi.c jcparam.c jcprepct.c jcsample.c jctrans.c jdapimin.c \ - jdapistd.c jdarith.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c \ - jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c \ - jdmerge.c jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c \ - jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c jquant1.c \ - jquant2.c jutils.c jmemmgr.c -# memmgr back ends: compile only one of these into a working library -SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c -# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom -APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \ - rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \ - rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c -SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES) -# files included by source files -INCLUDES= jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h jpegint.h \ - jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h -# documentation, test, and support files -DOCS= README install.txt usage.txt cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \ - wrjpgcom.1 wizard.txt example.c libjpeg.txt structure.txt \ - coderules.txt filelist.txt change.log -MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.bcc \ - makefile.mc6 makefile.dj makefile.wat makefile.vc makejdsw.vc6 \ - makeadsw.vc6 makejdep.vc6 makejdsp.vc6 makejmak.vc6 makecdep.vc6 \ - makecdsp.vc6 makecmak.vc6 makeddep.vc6 makeddsp.vc6 makedmak.vc6 \ - maketdep.vc6 maketdsp.vc6 maketmak.vc6 makerdep.vc6 makerdsp.vc6 \ - makermak.vc6 makewdep.vc6 makewdsp.vc6 makewmak.vc6 makejsln.v10 \ - makeasln.v10 makejvcx.v10 makejfil.v10 makecvcx.v10 makecfil.v10 \ - makedvcx.v10 makedfil.v10 maketvcx.v10 maketfil.v10 makervcx.v10 \ - makerfil.v10 makewvcx.v10 makewfil.v10 makeproj.mac makcjpeg.st \ - makdjpeg.st makljpeg.st maktjpeg.st makefile.manx makefile.sas \ - makefile.mms makefile.vms makvms.opt -CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \ - jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \ - jconfig.vms -CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp missing -OTHERFILES= jconfig.txt ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm \ - libjpeg.map -TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \ - testimgp.jpg -DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \ - $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES) -# library object files common to compression and decompression -COMOBJECTS= jaricom.o jcomapi.o jutils.o jerror.o jmemmgr.o $(SYSDEPMEM) -# compression library object files -CLIBOBJECTS= jcapimin.o jcapistd.o jcarith.o jctrans.o jcparam.o \ - jdatadst.o jcinit.o jcmaster.o jcmarker.o jcmainct.o jcprepct.o \ - jccoefct.o jccolor.o jcsample.o jchuff.o jcdctmgr.o jfdctfst.o \ - jfdctflt.o jfdctint.o -# decompression library object files -DLIBOBJECTS= jdapimin.o jdapistd.o jdarith.o jdtrans.o jdatasrc.o \ - jdmaster.o jdinput.o jdmarker.o jdhuff.o jdmainct.o \ - jdcoefct.o jdpostct.o jddctmgr.o jidctfst.o jidctflt.o \ - jidctint.o jdsample.o jdcolor.o jquant1.o jquant2.o jdmerge.o -# These objectfiles are included in libjpeg.a -LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS) -# object files for sample applications (excluding library files) -COBJECTS= cjpeg.o rdppm.o rdgif.o rdtarga.o rdrle.o rdbmp.o rdswitch.o \ - cdjpeg.o -DOBJECTS= djpeg.o wrppm.o wrgif.o wrtarga.o wrrle.o wrbmp.o rdcolmap.o \ - cdjpeg.o -TROBJECTS= jpegtran.o rdswitch.o cdjpeg.o transupp.o - - -all: libjpeg.a cjpeg.exe djpeg.exe jpegtran.exe rdjpgcom.exe wrjpgcom.exe - -libjpeg.a: $(LIBOBJECTS) - $(RM) libjpeg.a - $(AR) libjpeg.a $(LIBOBJECTS) - $(AR2) libjpeg.a - -cjpeg.exe: $(COBJECTS) libjpeg.a - $(LN) $(LDFLAGS) -o cjpeg.exe $(COBJECTS) libjpeg.a $(LDLIBS) - -djpeg.exe: $(DOBJECTS) libjpeg.a - $(LN) $(LDFLAGS) -o djpeg.exe $(DOBJECTS) libjpeg.a $(LDLIBS) - -jpegtran.exe: $(TROBJECTS) libjpeg.a - $(LN) $(LDFLAGS) -o jpegtran.exe $(TROBJECTS) libjpeg.a $(LDLIBS) - -rdjpgcom.exe: rdjpgcom.o - $(LN) $(LDFLAGS) -o rdjpgcom.exe rdjpgcom.o $(LDLIBS) - -wrjpgcom.exe: wrjpgcom.o - $(LN) $(LDFLAGS) -o wrjpgcom.exe wrjpgcom.o $(LDLIBS) - -jconfig.h: jconfig.txt - echo You must prepare a system-dependent jconfig.h file. - echo Please read the installation directions in install.txt. - exit 1 - -clean: - $(RM) *.o - $(RM) cjpeg.exe - $(RM) djpeg.exe - $(RM) jpegtran.exe - $(RM) rdjpgcom.exe - $(RM) wrjpgcom.exe - $(RM) libjpeg.a - $(RM) testout*.* - -test: cjpeg.exe djpeg.exe jpegtran.exe - $(RM) testout*.* - ./djpeg -dct int -ppm -outfile testout.ppm testorig.jpg - ./djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg - ./cjpeg -dct int -outfile testout.jpg testimg.ppm - ./djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg - ./cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm - ./jpegtran -outfile testoutt.jpg testprog.jpg - fc /b testimg.ppm testout.ppm - fc /b testimg.bmp testout.bmp - fc /b testimg.jpg testout.jpg - fc /b testimg.ppm testoutp.ppm - fc /b testimgp.jpg testoutp.jpg - fc /b testorig.jpg testoutt.jpg - - -jaricom.o: jaricom.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcapimin.o: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcapistd.o: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcarith.o: jcarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jccoefct.o: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jccolor.o: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcdctmgr.o: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jchuff.o: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcinit.o: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcmainct.o: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcmarker.o: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcmaster.o: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcomapi.o: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcparam.o: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcprepct.o: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcsample.o: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jctrans.o: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdapimin.o: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdapistd.o: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdarith.o: jdarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdatadst.o: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h -jdatasrc.o: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h -jdcoefct.o: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdcolor.o: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jddctmgr.o: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jdhuff.o: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdinput.o: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdmainct.o: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdmarker.o: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdmaster.o: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdmerge.o: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdpostct.o: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdsample.o: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdtrans.o: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jerror.o: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h -jfdctflt.o: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jfdctfst.o: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jfdctint.o: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jidctflt.o: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jidctfst.o: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jidctint.o: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jquant1.o: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jquant2.o: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jutils.o: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jmemmgr.o: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemansi.o: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemname.o: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemnobs.o: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemdos.o: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemmac.o: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -cjpeg.o: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h -djpeg.o: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h -jpegtran.o: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h -rdjpgcom.o: rdjpgcom.c jinclude.h jconfig.h -wrjpgcom.o: wrjpgcom.c jinclude.h jconfig.h -cdjpeg.o: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdcolmap.o: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdswitch.o: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -transupp.o: transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h -rdppm.o: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrppm.o: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdgif.o: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrgif.o: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdtarga.o: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrtarga.o: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdbmp.o: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrbmp.o: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdrle.o: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrrle.o: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h diff --git a/jpeg/makefile.manx b/jpeg/makefile.manx deleted file mode 100755 index 471f408..0000000 --- a/jpeg/makefile.manx +++ /dev/null @@ -1,221 +0,0 @@ -# Makefile for Independent JPEG Group's software - -# This makefile is for Amiga systems using Manx Aztec C ver 5.x. -# Thanks to D.J. James (djjames@cup.portal.com) for this version. - -# Read installation instructions before saying "make" !! - -# The name of your C compiler: -CC= cc - -# You may need to adjust these cc options: -# Uncomment for generic 68000 code (will work on any Amiga) -ARCHFLAGS= -sn - -# Uncomment for 68020/68030 code (faster, but won't run on 68000 CPU) -#ARCHFLAGS= -c2 - -CFLAGS= -MC -MD $(ARCHFLAGS) -spfam -r4 - -# Link-time cc options: -LDFLAGS= -g - -# To link any special libraries, add the necessary -l commands here. -LDLIBS= -lml -lcl - -# Put here the object file name for the correct system-dependent memory -# manager file. For Amiga we recommend jmemname.o. -SYSDEPMEM= jmemname.o - -# miscellaneous OS-dependent stuff -# linker -LN= ln -# file deletion command -RM= delete quiet -# library (.lib) file creation command -AR= lb - -# End of configurable options. - - -# source files: JPEG library proper -LIBSOURCES= jaricom.c jcapimin.c jcapistd.c jcarith.c jccoefct.c jccolor.c \ - jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c \ - jcomapi.c jcparam.c jcprepct.c jcsample.c jctrans.c jdapimin.c \ - jdapistd.c jdarith.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c \ - jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c \ - jdmerge.c jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c \ - jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c jquant1.c \ - jquant2.c jutils.c jmemmgr.c -# memmgr back ends: compile only one of these into a working library -SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c -# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom -APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \ - rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \ - rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c -SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES) -# files included by source files -INCLUDES= jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h jpegint.h \ - jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h -# documentation, test, and support files -DOCS= README install.txt usage.txt cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \ - wrjpgcom.1 wizard.txt example.c libjpeg.txt structure.txt \ - coderules.txt filelist.txt change.log -MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.bcc \ - makefile.mc6 makefile.dj makefile.wat makefile.vc makejdsw.vc6 \ - makeadsw.vc6 makejdep.vc6 makejdsp.vc6 makejmak.vc6 makecdep.vc6 \ - makecdsp.vc6 makecmak.vc6 makeddep.vc6 makeddsp.vc6 makedmak.vc6 \ - maketdep.vc6 maketdsp.vc6 maketmak.vc6 makerdep.vc6 makerdsp.vc6 \ - makermak.vc6 makewdep.vc6 makewdsp.vc6 makewmak.vc6 makejsln.v10 \ - makeasln.v10 makejvcx.v10 makejfil.v10 makecvcx.v10 makecfil.v10 \ - makedvcx.v10 makedfil.v10 maketvcx.v10 maketfil.v10 makervcx.v10 \ - makerfil.v10 makewvcx.v10 makewfil.v10 makeproj.mac makcjpeg.st \ - makdjpeg.st makljpeg.st maktjpeg.st makefile.manx makefile.sas \ - makefile.mms makefile.vms makvms.opt -CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \ - jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \ - jconfig.vms -CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp missing -OTHERFILES= jconfig.txt ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm \ - libjpeg.map -TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \ - testimgp.jpg -DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \ - $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES) -# library object files common to compression and decompression -COMOBJECTS= jaricom.o jcomapi.o jutils.o jerror.o jmemmgr.o $(SYSDEPMEM) -# compression library object files -CLIBOBJECTS= jcapimin.o jcapistd.o jcarith.o jctrans.o jcparam.o \ - jdatadst.o jcinit.o jcmaster.o jcmarker.o jcmainct.o jcprepct.o \ - jccoefct.o jccolor.o jcsample.o jchuff.o jcdctmgr.o jfdctfst.o \ - jfdctflt.o jfdctint.o -# decompression library object files -DLIBOBJECTS= jdapimin.o jdapistd.o jdarith.o jdtrans.o jdatasrc.o \ - jdmaster.o jdinput.o jdmarker.o jdhuff.o jdmainct.o \ - jdcoefct.o jdpostct.o jddctmgr.o jidctfst.o jidctflt.o \ - jidctint.o jdsample.o jdcolor.o jquant1.o jquant2.o jdmerge.o -# These objectfiles are included in libjpeg.lib -LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS) -# object files for sample applications (excluding library files) -COBJECTS= cjpeg.o rdppm.o rdgif.o rdtarga.o rdrle.o rdbmp.o rdswitch.o \ - cdjpeg.o -DOBJECTS= djpeg.o wrppm.o wrgif.o wrtarga.o wrrle.o wrbmp.o rdcolmap.o \ - cdjpeg.o -TROBJECTS= jpegtran.o rdswitch.o cdjpeg.o transupp.o - - -all: libjpeg.lib cjpeg djpeg jpegtran rdjpgcom wrjpgcom - -libjpeg.lib: $(LIBOBJECTS) - -$(RM) libjpeg.lib - $(AR) libjpeg.lib $(LIBOBJECTS) - -cjpeg: $(COBJECTS) libjpeg.lib - $(LN) $(LDFLAGS) -o cjpeg $(COBJECTS) libjpeg.lib $(LDLIBS) - -djpeg: $(DOBJECTS) libjpeg.lib - $(LN) $(LDFLAGS) -o djpeg $(DOBJECTS) libjpeg.lib $(LDLIBS) - -jpegtran: $(TROBJECTS) libjpeg.lib - $(LN) $(LDFLAGS) -o jpegtran $(TROBJECTS) libjpeg.lib $(LDLIBS) - -rdjpgcom: rdjpgcom.o - $(LN) $(LDFLAGS) -o rdjpgcom rdjpgcom.o $(LDLIBS) - -wrjpgcom: wrjpgcom.o - $(LN) $(LDFLAGS) -o wrjpgcom wrjpgcom.o $(LDLIBS) - -jconfig.h: jconfig.txt - echo You must prepare a system-dependent jconfig.h file. - echo Please read the installation directions in install.txt. - exit 1 - -clean: - -$(RM) *.o cjpeg djpeg jpegtran libjpeg.lib rdjpgcom wrjpgcom - -$(RM) core testout*.* - -test: cjpeg djpeg jpegtran - -$(RM) testout*.* - djpeg -dct int -ppm -outfile testout.ppm testorig.jpg - djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg - cjpeg -dct int -outfile testout.jpg testimg.ppm - djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg - cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm - jpegtran -outfile testoutt.jpg testprog.jpg - cmp testimg.ppm testout.ppm - cmp testimg.bmp testout.bmp - cmp testimg.jpg testout.jpg - cmp testimg.ppm testoutp.ppm - cmp testimgp.jpg testoutp.jpg - cmp testorig.jpg testoutt.jpg - - -jaricom.o: jaricom.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcapimin.o: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcapistd.o: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcarith.o: jcarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jccoefct.o: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jccolor.o: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcdctmgr.o: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jchuff.o: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcinit.o: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcmainct.o: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcmarker.o: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcmaster.o: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcomapi.o: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcparam.o: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcprepct.o: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcsample.o: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jctrans.o: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdapimin.o: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdapistd.o: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdarith.o: jdarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdatadst.o: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h -jdatasrc.o: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h -jdcoefct.o: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdcolor.o: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jddctmgr.o: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jdhuff.o: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdinput.o: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdmainct.o: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdmarker.o: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdmaster.o: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdmerge.o: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdpostct.o: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdsample.o: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdtrans.o: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jerror.o: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h -jfdctflt.o: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jfdctfst.o: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jfdctint.o: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jidctflt.o: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jidctfst.o: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jidctint.o: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jquant1.o: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jquant2.o: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jutils.o: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jmemmgr.o: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemansi.o: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemname.o: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemnobs.o: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemdos.o: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemmac.o: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -cjpeg.o: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h -djpeg.o: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h -jpegtran.o: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h -rdjpgcom.o: rdjpgcom.c jinclude.h jconfig.h -wrjpgcom.o: wrjpgcom.c jinclude.h jconfig.h -cdjpeg.o: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdcolmap.o: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdswitch.o: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -transupp.o: transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h -rdppm.o: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrppm.o: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdgif.o: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrgif.o: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdtarga.o: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrtarga.o: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdbmp.o: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrbmp.o: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdrle.o: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrrle.o: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h diff --git a/jpeg/makefile.mc6 b/jpeg/makefile.mc6 deleted file mode 100755 index 1ee83be..0000000 --- a/jpeg/makefile.mc6 +++ /dev/null @@ -1,256 +0,0 @@ -# Makefile for Independent JPEG Group's software - -# This makefile is for Microsoft C for MS-DOS, version 6.00A and up. -# Use NMAKE, not Microsoft's brain-damaged MAKE. -# Thanks to Alan Wright and Chris Turner of Olivetti Research Ltd. - -# Read installation instructions before saying "nmake" !! - -# You may need to adjust these compiler options: -CFLAGS = -AM -Oecigt -Gs -W3 -# -AM medium memory model (or use -AS for small model, if you remove features) -# -Oecigt -Gs maximum safe optimisation (-Ol has bugs in MSC 6.00A) -# -W3 warning level 3 -# You might also want to add -G2 if you have an 80286, etc. -# Generally, we recommend defining any configuration symbols in jconfig.h, -# NOT via -D switches here. - -# Jan-Herman Buining suggests the following switches for MS C 8.0 and a 486: -# CFLAGS = /AM /f- /FPi87 /G3 /Gs /Gy /Ob1 /Oc /Oe /Og /Oi /Ol /On /Oo /Ot \ -# /OV4 /W3 -# except for jquant1.c, which must be compiled with /Oo- to avoid a compiler -# crash. - -# Ingar Steinsland suggests the following switches when building -# a 16-bit Windows DLL: -# CFLAGS = -ALw -Gsw -Zpe -W3 -O2 -Zi -Zd - -# Put here the object file name for the correct system-dependent memory -# manager file. For DOS, we recommend jmemdos.c and jmemdosa.asm. -# (But not for Windows; see install.txt if you use this makefile for Windows.) -SYSDEPMEM= jmemdos.obj jmemdosa.obj -# SYSDEPMEMLIB must list the same files with "+" signs for the librarian. -SYSDEPMEMLIB= +jmemdos.obj +jmemdosa.obj - -# End of configurable options. - - -# source files: JPEG library proper -LIBSOURCES= jaricom.c jcapimin.c jcapistd.c jcarith.c jccoefct.c jccolor.c \ - jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c \ - jcomapi.c jcparam.c jcprepct.c jcsample.c jctrans.c jdapimin.c \ - jdapistd.c jdarith.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c \ - jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c \ - jdmerge.c jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c \ - jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c jquant1.c \ - jquant2.c jutils.c jmemmgr.c -# memmgr back ends: compile only one of these into a working library -SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c -# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom -APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \ - rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \ - rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c -SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES) -# files included by source files -INCLUDES= jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h jpegint.h \ - jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h -# documentation, test, and support files -DOCS= README install.txt usage.txt cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \ - wrjpgcom.1 wizard.txt example.c libjpeg.txt structure.txt \ - coderules.txt filelist.txt change.log -MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.bcc \ - makefile.mc6 makefile.dj makefile.wat makefile.vc makejdsw.vc6 \ - makeadsw.vc6 makejdep.vc6 makejdsp.vc6 makejmak.vc6 makecdep.vc6 \ - makecdsp.vc6 makecmak.vc6 makeddep.vc6 makeddsp.vc6 makedmak.vc6 \ - maketdep.vc6 maketdsp.vc6 maketmak.vc6 makerdep.vc6 makerdsp.vc6 \ - makermak.vc6 makewdep.vc6 makewdsp.vc6 makewmak.vc6 makejsln.v10 \ - makeasln.v10 makejvcx.v10 makejfil.v10 makecvcx.v10 makecfil.v10 \ - makedvcx.v10 makedfil.v10 maketvcx.v10 maketfil.v10 makervcx.v10 \ - makerfil.v10 makewvcx.v10 makewfil.v10 makeproj.mac makcjpeg.st \ - makdjpeg.st makljpeg.st maktjpeg.st makefile.manx makefile.sas \ - makefile.mms makefile.vms makvms.opt -CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \ - jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \ - jconfig.vms -CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp missing -OTHERFILES= jconfig.txt ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm \ - libjpeg.map -TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \ - testimgp.jpg -DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \ - $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES) -# library object files common to compression and decompression -COMOBJECTS= jaricom.obj jcomapi.obj jutils.obj jerror.obj jmemmgr.obj $(SYSDEPMEM) -# compression library object files -CLIBOBJECTS= jcapimin.obj jcapistd.obj jcarith.obj jctrans.obj jcparam.obj \ - jdatadst.obj jcinit.obj jcmaster.obj jcmarker.obj jcmainct.obj \ - jcprepct.obj jccoefct.obj jccolor.obj jcsample.obj jchuff.obj \ - jcdctmgr.obj jfdctfst.obj jfdctflt.obj jfdctint.obj -# decompression library object files -DLIBOBJECTS= jdapimin.obj jdapistd.obj jdarith.obj jdtrans.obj jdatasrc.obj \ - jdmaster.obj jdinput.obj jdmarker.obj jdhuff.obj jdmainct.obj \ - jdcoefct.obj jdpostct.obj jddctmgr.obj jidctfst.obj jidctflt.obj \ - jidctint.obj jdsample.obj jdcolor.obj jquant1.obj jquant2.obj \ - jdmerge.obj -# These objectfiles are included in libjpeg.lib -LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS) -# object files for sample applications (excluding library files) -COBJECTS= cjpeg.obj rdppm.obj rdgif.obj rdtarga.obj rdrle.obj rdbmp.obj \ - rdswitch.obj cdjpeg.obj -DOBJECTS= djpeg.obj wrppm.obj wrgif.obj wrtarga.obj wrrle.obj wrbmp.obj \ - rdcolmap.obj cdjpeg.obj -TROBJECTS= jpegtran.obj rdswitch.obj cdjpeg.obj transupp.obj - -# need linker response file because file list > 128 chars -RFILE = libjpeg.ans - - -all: libjpeg.lib cjpeg.exe djpeg.exe jpegtran.exe rdjpgcom.exe wrjpgcom.exe - -libjpeg.lib: $(LIBOBJECTS) $(RFILE) - del libjpeg.lib - lib @$(RFILE) - -# linker response file for building libjpeg.lib -$(RFILE) : makefile - del $(RFILE) - echo libjpeg.lib >$(RFILE) -# silly want-to-create-it prompt: - echo y >>$(RFILE) - echo +jcapimin.obj +jcapistd.obj +jcarith.obj +jctrans.obj & >>$(RFILE) - echo +jcparam.obj +jdatadst.obj +jcinit.obj +jcmaster.obj & >>$(RFILE) - echo +jcmarker.obj +jcmainct.obj +jcprepct.obj & >>$(RFILE) - echo +jccoefct.obj +jccolor.obj +jcsample.obj +jchuff.obj & >>$(RFILE) - echo +jcdctmgr.obj +jfdctfst.obj +jfdctflt.obj & >>$(RFILE) - echo +jfdctint.obj +jdapimin.obj +jdapistd.obj & >>$(RFILE) - echo +jdarith.obj +jdtrans.obj +jdatasrc.obj +jdmaster.obj & >>$(RFILE) - echo +jdinput.obj +jdmarker.obj +jdhuff.obj +jdmainct.obj & >>$(RFILE) - echo +jdcoefct.obj +jdpostct.obj +jddctmgr.obj & >>$(RFILE) - echo +jidctfst.obj +jidctflt.obj +jidctint.obj & >>$(RFILE) - echo +jdsample.obj +jdcolor.obj +jquant1.obj & >>$(RFILE) - echo +jquant2.obj +jdmerge.obj +jaricom.obj +jcomapi.obj & >>$(RFILE) - echo +jutils.obj +jerror.obj +jmemmgr.obj & >>$(RFILE) - echo $(SYSDEPMEMLIB) ; >>$(RFILE) - -cjpeg.exe: $(COBJECTS) libjpeg.lib - echo $(COBJECTS) >cjpeg.lst - link /STACK:4096 /EXEPACK @cjpeg.lst, cjpeg.exe, , libjpeg.lib, ; - del cjpeg.lst - -djpeg.exe: $(DOBJECTS) libjpeg.lib - echo $(DOBJECTS) >djpeg.lst - link /STACK:4096 /EXEPACK @djpeg.lst, djpeg.exe, , libjpeg.lib, ; - del djpeg.lst - -jpegtran.exe: $(TROBJECTS) libjpeg.lib - link /STACK:4096 /EXEPACK $(TROBJECTS), jpegtran.exe, , libjpeg.lib, ; - -rdjpgcom.exe: rdjpgcom.c - $(CC) -AS -O -W3 rdjpgcom.c - -# wrjpgcom needs large model so it can malloc a 64K chunk -wrjpgcom.exe: wrjpgcom.c - $(CC) -AL -O -W3 wrjpgcom.c - -jconfig.h: jconfig.txt - echo You must prepare a system-dependent jconfig.h file. - echo Please read the installation directions in install.txt. - exit 1 - -clean: - del *.obj - del libjpeg.lib - del cjpeg.exe - del djpeg.exe - del jpegtran.exe - del rdjpgcom.exe - del wrjpgcom.exe - del testout*.* - -test: cjpeg.exe djpeg.exe jpegtran.exe - del testout*.* - djpeg -dct int -ppm -outfile testout.ppm testorig.jpg - djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg - cjpeg -dct int -outfile testout.jpg testimg.ppm - djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg - cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm - jpegtran -outfile testoutt.jpg testprog.jpg - fc /b testimg.ppm testout.ppm - fc /b testimg.bmp testout.bmp - fc /b testimg.jpg testout.jpg - fc /b testimg.ppm testoutp.ppm - fc /b testimgp.jpg testoutp.jpg - fc /b testorig.jpg testoutt.jpg - - -jaricom.obj: jaricom.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcapimin.obj: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcapistd.obj: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcarith.obj: jcarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jccoefct.obj: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jccolor.obj: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcdctmgr.obj: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jchuff.obj: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcinit.obj: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcmainct.obj: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcmarker.obj: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcmaster.obj: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcomapi.obj: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcparam.obj: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcprepct.obj: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcsample.obj: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jctrans.obj: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdapimin.obj: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdapistd.obj: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdarith.obj: jdarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdatadst.obj: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h -jdatasrc.obj: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h -jdcoefct.obj: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdcolor.obj: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jddctmgr.obj: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jdhuff.obj: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdinput.obj: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdmainct.obj: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdmarker.obj: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdmaster.obj: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdmerge.obj: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdpostct.obj: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdsample.obj: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdtrans.obj: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jerror.obj: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h -jfdctflt.obj: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jfdctfst.obj: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jfdctint.obj: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jidctflt.obj: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jidctfst.obj: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jidctint.obj: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jquant1.obj: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jquant2.obj: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jutils.obj: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jmemmgr.obj: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemansi.obj: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemname.obj: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemnobs.obj: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemdos.obj: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemmac.obj: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -cjpeg.obj: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h -djpeg.obj: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h -jpegtran.obj: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h -rdjpgcom.obj: rdjpgcom.c jinclude.h jconfig.h -wrjpgcom.obj: wrjpgcom.c jinclude.h jconfig.h -cdjpeg.obj: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdcolmap.obj: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdswitch.obj: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -transupp.obj: transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h -rdppm.obj: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrppm.obj: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdgif.obj: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrgif.obj: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdtarga.obj: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrtarga.obj: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdbmp.obj: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrbmp.obj: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdrle.obj: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrrle.obj: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -jmemdosa.obj : jmemdosa.asm - masm /mx $*; diff --git a/jpeg/makefile.mms b/jpeg/makefile.mms deleted file mode 100755 index 6019dfa..0000000 --- a/jpeg/makefile.mms +++ /dev/null @@ -1,225 +0,0 @@ -# Makefile for Independent JPEG Group's software - -# This makefile is for use with MMS on Digital VMS systems. -# Thanks to Rick Dyson (dyson@iowasp.physics.uiowa.edu) -# and Tim Bell (tbell@netcom.com) for their help. - -# Read installation instructions before saying "MMS" !! - -# You may need to adjust these cc options: -CFLAGS= $(CFLAGS) /NoDebug /Optimize -# Generally, we recommend defining any configuration symbols in jconfig.h, -# NOT via /Define switches here. -.ifdef ALPHA -OPT= -.else -OPT= ,Sys$Disk:[]MAKVMS.OPT/Option -.endif - -# Put here the object file name for the correct system-dependent memory -# manager file. For Unix this is usually jmemnobs.o, but you may want -# to use jmemansi.o or jmemname.o if you have limited swap space. -SYSDEPMEM= jmemnobs.obj - -# End of configurable options. - - -# source files: JPEG library proper -LIBSOURCES= jaricom.c jcapimin.c jcapistd.c jcarith.c jccoefct.c jccolor.c \ - jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c \ - jcomapi.c jcparam.c jcprepct.c jcsample.c jctrans.c jdapimin.c \ - jdapistd.c jdarith.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c \ - jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c \ - jdmerge.c jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c \ - jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c jquant1.c \ - jquant2.c jutils.c jmemmgr.c -# memmgr back ends: compile only one of these into a working library -SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c -# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom -APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \ - rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \ - rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c -SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES) -# files included by source files -INCLUDES= jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h jpegint.h \ - jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h -# documentation, test, and support files -DOCS= README install.txt usage.txt cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \ - wrjpgcom.1 wizard.txt example.c libjpeg.txt structure.txt \ - coderules.txt filelist.txt change.log -MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.bcc \ - makefile.mc6 makefile.dj makefile.wat makefile.vc makejdsw.vc6 \ - makeadsw.vc6 makejdep.vc6 makejdsp.vc6 makejmak.vc6 makecdep.vc6 \ - makecdsp.vc6 makecmak.vc6 makeddep.vc6 makeddsp.vc6 makedmak.vc6 \ - maketdep.vc6 maketdsp.vc6 maketmak.vc6 makerdep.vc6 makerdsp.vc6 \ - makermak.vc6 makewdep.vc6 makewdsp.vc6 makewmak.vc6 makejsln.v10 \ - makeasln.v10 makejvcx.v10 makejfil.v10 makecvcx.v10 makecfil.v10 \ - makedvcx.v10 makedfil.v10 maketvcx.v10 maketfil.v10 makervcx.v10 \ - makerfil.v10 makewvcx.v10 makewfil.v10 makeproj.mac makcjpeg.st \ - makdjpeg.st makljpeg.st maktjpeg.st makefile.manx makefile.sas \ - makefile.mms makefile.vms makvms.opt -CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \ - jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \ - jconfig.vms -CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp missing -OTHERFILES= jconfig.txt ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm \ - libjpeg.map -TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \ - testimgp.jpg -DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \ - $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES) -# library object files common to compression and decompression -COMOBJECTS= jaricom.obj jcomapi.obj jutils.obj jerror.obj jmemmgr.obj $(SYSDEPMEM) -# compression library object files -CLIBOBJECTS= jcapimin.obj jcapistd.obj jcarith.obj jctrans.obj jcparam.obj \ - jdatadst.obj jcinit.obj jcmaster.obj jcmarker.obj jcmainct.obj \ - jcprepct.obj jccoefct.obj jccolor.obj jcsample.obj jchuff.obj \ - jcdctmgr.obj jfdctfst.obj jfdctflt.obj jfdctint.obj -# decompression library object files -DLIBOBJECTS= jdapimin.obj jdapistd.obj jdarith.obj jdtrans.obj jdatasrc.obj \ - jdmaster.obj jdinput.obj jdmarker.obj jdhuff.obj jdmainct.obj \ - jdcoefct.obj jdpostct.obj jddctmgr.obj jidctfst.obj jidctflt.obj \ - jidctint.obj jdsample.obj jdcolor.obj jquant1.obj jquant2.obj \ - jdmerge.obj -# These objectfiles are included in libjpeg.olb -LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS) -# object files for sample applications (excluding library files) -COBJECTS= cjpeg.obj rdppm.obj rdgif.obj rdtarga.obj rdrle.obj rdbmp.obj \ - rdswitch.obj cdjpeg.obj -DOBJECTS= djpeg.obj wrppm.obj wrgif.obj wrtarga.obj wrrle.obj wrbmp.obj \ - rdcolmap.obj cdjpeg.obj -TROBJECTS= jpegtran.obj rdswitch.obj cdjpeg.obj transupp.obj -# objectfile lists with commas --- what a crock -COBJLIST= cjpeg.obj,rdppm.obj,rdgif.obj,rdtarga.obj,rdrle.obj,rdbmp.obj,\ - rdswitch.obj,cdjpeg.obj -DOBJLIST= djpeg.obj,wrppm.obj,wrgif.obj,wrtarga.obj,wrrle.obj,wrbmp.obj,\ - rdcolmap.obj,cdjpeg.obj -TROBJLIST= jpegtran.obj,rdswitch.obj,cdjpeg.obj,transupp.obj -LIBOBJLIST= jaricom.obj,jcapimin.obj,jcapistd.obj,jcarith.obj,jctrans.obj,\ - jcparam.obj,jdatadst.obj,jcinit.obj,jcmaster.obj,jcmarker.obj,\ - jcmainct.obj,jcprepct.obj,jccoefct.obj,jccolor.obj,jcsample.obj,\ - jchuff.obj,jcdctmgr.obj,jfdctfst.obj,jfdctflt.obj,jfdctint.obj,\ - jdapimin.obj,jdapistd.obj,jdarith.obj,jdtrans.obj,jdatasrc.obj,\ - jdmaster.obj,jdinput.obj,jdmarker.obj,jdhuff.obj,jdmainct.obj,\ - jdcoefct.obj,jdpostct.obj,jddctmgr.obj,jidctfst.obj,jidctflt.obj,\ - jidctint.obj,jdsample.obj,jdcolor.obj,jquant1.obj,jquant2.obj,\ - jdmerge.obj,jcomapi.obj,jutils.obj,jerror.obj,jmemmgr.obj,$(SYSDEPMEM) - - -.first - @- Define /NoLog Sys Sys$Library - -ALL : libjpeg.olb cjpeg.exe djpeg.exe jpegtran.exe rdjpgcom.exe wrjpgcom.exe - @ Continue - -libjpeg.olb : $(LIBOBJECTS) - Library /Create libjpeg.olb $(LIBOBJLIST) - -cjpeg.exe : $(COBJECTS) libjpeg.olb - $(LINK) $(LFLAGS) /Executable = cjpeg.exe $(COBJLIST),libjpeg.olb/Library$(OPT) - -djpeg.exe : $(DOBJECTS) libjpeg.olb - $(LINK) $(LFLAGS) /Executable = djpeg.exe $(DOBJLIST),libjpeg.olb/Library$(OPT) - -jpegtran.exe : $(TROBJECTS) libjpeg.olb - $(LINK) $(LFLAGS) /Executable = jpegtran.exe $(TROBJLIST),libjpeg.olb/Library$(OPT) - -rdjpgcom.exe : rdjpgcom.obj - $(LINK) $(LFLAGS) /Executable = rdjpgcom.exe rdjpgcom.obj$(OPT) - -wrjpgcom.exe : wrjpgcom.obj - $(LINK) $(LFLAGS) /Executable = wrjpgcom.exe wrjpgcom.obj$(OPT) - -jconfig.h : jconfig.vms - @- Copy jconfig.vms jconfig.h - -clean : - @- Set Protection = Owner:RWED *.*;-1 - @- Set Protection = Owner:RWED *.OBJ - - Purge /NoLog /NoConfirm *.* - - Delete /NoLog /NoConfirm *.OBJ; - -test : cjpeg.exe djpeg.exe jpegtran.exe - mcr sys$disk:[]djpeg -dct int -ppm -outfile testout.ppm testorig.jpg - mcr sys$disk:[]djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg - mcr sys$disk:[]cjpeg -dct int -outfile testout.jpg testimg.ppm - mcr sys$disk:[]djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg - mcr sys$disk:[]cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm - mcr sys$disk:[]jpegtran -outfile testoutt.jpg testprog.jpg - - Backup /Compare/Log testimg.ppm testout.ppm - - Backup /Compare/Log testimg.bmp testout.bmp - - Backup /Compare/Log testimg.jpg testout.jpg - - Backup /Compare/Log testimg.ppm testoutp.ppm - - Backup /Compare/Log testimgp.jpg testoutp.jpg - - Backup /Compare/Log testorig.jpg testoutt.jpg - - -jaricom.obj : jaricom.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcapimin.obj : jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcapistd.obj : jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcarith.obj : jcarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jccoefct.obj : jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jccolor.obj : jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcdctmgr.obj : jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jchuff.obj : jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcinit.obj : jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcmainct.obj : jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcmarker.obj : jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcmaster.obj : jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcomapi.obj : jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcparam.obj : jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcprepct.obj : jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcsample.obj : jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jctrans.obj : jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdapimin.obj : jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdapistd.obj : jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdarith.obj : jdarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdatadst.obj : jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h -jdatasrc.obj : jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h -jdcoefct.obj : jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdcolor.obj : jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jddctmgr.obj : jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jdhuff.obj : jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdinput.obj : jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdmainct.obj : jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdmarker.obj : jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdmaster.obj : jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdmerge.obj : jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdpostct.obj : jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdsample.obj : jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdtrans.obj : jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jerror.obj : jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h -jfdctflt.obj : jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jfdctfst.obj : jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jfdctint.obj : jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jidctflt.obj : jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jidctfst.obj : jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jidctint.obj : jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jquant1.obj : jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jquant2.obj : jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jutils.obj : jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jmemmgr.obj : jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemansi.obj : jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemname.obj : jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemnobs.obj : jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemdos.obj : jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemmac.obj : jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -cjpeg.obj : cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h -djpeg.obj : djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h -jpegtran.obj : jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h -rdjpgcom.obj : rdjpgcom.c jinclude.h jconfig.h -wrjpgcom.obj : wrjpgcom.c jinclude.h jconfig.h -cdjpeg.obj : cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdcolmap.obj : rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdswitch.obj : rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -transupp.obj : transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h -rdppm.obj : rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrppm.obj : wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdgif.obj : rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrgif.obj : wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdtarga.obj : rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrtarga.obj : wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdbmp.obj : rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrbmp.obj : wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdrle.obj : rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrrle.obj : wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h diff --git a/jpeg/makefile.sas b/jpeg/makefile.sas deleted file mode 100755 index 252f8fb..0000000 --- a/jpeg/makefile.sas +++ /dev/null @@ -1,259 +0,0 @@ -# Makefile for Independent JPEG Group's software - -# This makefile is for Amiga systems using SAS C 6.0 and up. -# Thanks to Ed Hanway, Mark Rinfret, and Jim Zepeda. - -# Read installation instructions before saying "make" !! - -# The name of your C compiler: -CC= sc - -# You may need to adjust these cc options: -# Uncomment the following lines for generic 680x0 version -ARCHFLAGS= cpu=any -SUFFIX= - -# Uncomment the following lines for 68030-only version -#ARCHFLAGS= cpu=68030 -#SUFFIX=.030 - -CFLAGS= nostackcheck data=near parms=register optimize $(ARCHFLAGS) \ - ignore=104 ignore=304 ignore=306 -# ignore=104 disables warnings for mismatched const qualifiers -# ignore=304 disables warnings for variables being optimized out -# ignore=306 disables warnings for the inlining of functions -# Generally, we recommend defining any configuration symbols in jconfig.h, -# NOT via define switches here. - -# Link-time cc options: -LDFLAGS= SC SD ND BATCH - -# To link any special libraries, add the necessary commands here. -LDLIBS= LIB:scm.lib LIB:sc.lib - -# Put here the object file name for the correct system-dependent memory -# manager file. For Amiga we recommend jmemname.o. -SYSDEPMEM= jmemname.o - -# miscellaneous OS-dependent stuff -# linker -LN= slink -# file deletion command -RM= delete quiet -# library (.lib) file creation command -AR= oml - -# End of configurable options. - - -# source files: JPEG library proper -LIBSOURCES= jaricom.c jcapimin.c jcapistd.c jcarith.c jccoefct.c jccolor.c \ - jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c \ - jcomapi.c jcparam.c jcprepct.c jcsample.c jctrans.c jdapimin.c \ - jdapistd.c jdarith.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c \ - jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c \ - jdmerge.c jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c \ - jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c jquant1.c \ - jquant2.c jutils.c jmemmgr.c -# memmgr back ends: compile only one of these into a working library -SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c -# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom -APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \ - rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \ - rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c -SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES) -# files included by source files -INCLUDES= jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h jpegint.h \ - jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h -# documentation, test, and support files -DOCS= README install.txt usage.txt cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \ - wrjpgcom.1 wizard.txt example.c libjpeg.txt structure.txt \ - coderules.txt filelist.txt change.log -MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.bcc \ - makefile.mc6 makefile.dj makefile.wat makefile.vc makejdsw.vc6 \ - makeadsw.vc6 makejdep.vc6 makejdsp.vc6 makejmak.vc6 makecdep.vc6 \ - makecdsp.vc6 makecmak.vc6 makeddep.vc6 makeddsp.vc6 makedmak.vc6 \ - maketdep.vc6 maketdsp.vc6 maketmak.vc6 makerdep.vc6 makerdsp.vc6 \ - makermak.vc6 makewdep.vc6 makewdsp.vc6 makewmak.vc6 makejsln.v10 \ - makeasln.v10 makejvcx.v10 makejfil.v10 makecvcx.v10 makecfil.v10 \ - makedvcx.v10 makedfil.v10 maketvcx.v10 maketfil.v10 makervcx.v10 \ - makerfil.v10 makewvcx.v10 makewfil.v10 makeproj.mac makcjpeg.st \ - makdjpeg.st makljpeg.st maktjpeg.st makefile.manx makefile.sas \ - makefile.mms makefile.vms makvms.opt -CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \ - jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \ - jconfig.vms -CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp missing -OTHERFILES= jconfig.txt ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm \ - libjpeg.map -TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \ - testimgp.jpg -DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \ - $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES) -# library object files common to compression and decompression -COMOBJECTS= jaricom.o jcomapi.o jutils.o jerror.o jmemmgr.o $(SYSDEPMEM) -# compression library object files -CLIBOBJECTS= jcapimin.o jcapistd.o jcarith.o jctrans.o jcparam.o \ - jdatadst.o jcinit.o jcmaster.o jcmarker.o jcmainct.o jcprepct.o \ - jccoefct.o jccolor.o jcsample.o jchuff.o jcdctmgr.o jfdctfst.o \ - jfdctflt.o jfdctint.o -# decompression library object files -DLIBOBJECTS= jdapimin.o jdapistd.o jdarith.o jdtrans.o jdatasrc.o \ - jdmaster.o jdinput.o jdmarker.o jdhuff.o jdmainct.o \ - jdcoefct.o jdpostct.o jddctmgr.o jidctfst.o jidctflt.o \ - jidctint.o jdsample.o jdcolor.o jquant1.o jquant2.o jdmerge.o -# These objectfiles are included in libjpeg.lib -LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS) -# object files for sample applications (excluding library files) -COBJECTS= cjpeg.o rdppm.o rdgif.o rdtarga.o rdrle.o rdbmp.o rdswitch.o \ - cdjpeg.o -DOBJECTS= djpeg.o wrppm.o wrgif.o wrtarga.o wrrle.o wrbmp.o rdcolmap.o \ - cdjpeg.o -TROBJECTS= jpegtran.o rdswitch.o cdjpeg.o transupp.o - - -all: libjpeg.lib cjpeg$(SUFFIX) djpeg$(SUFFIX) jpegtran$(SUFFIX) rdjpgcom$(SUFFIX) wrjpgcom$(SUFFIX) - -# note: do several AR steps to avoid command line length limitations - -libjpeg.lib: $(LIBOBJECTS) - -$(RM) libjpeg.lib - $(AR) libjpeg.lib r $(CLIBOBJECTS) - $(AR) libjpeg.lib r $(DLIBOBJECTS) - $(AR) libjpeg.lib r $(COMOBJECTS) - -cjpeg$(SUFFIX): $(COBJECTS) libjpeg.lib - $(LN) - -# You may want to adjust these compiler options: -CFLAGS= $(cflags) $(cdebug) $(cvars) -I. -# Generally, we recommend defining any configuration symbols in jconfig.h, -# NOT via -D switches here. - -# Link-time options: -LDFLAGS= $(ldebug) $(conlflags) - -# To link any special libraries, add the necessary commands here. -LDLIBS= $(conlibs) - -# Put here the object file name for the correct system-dependent memory -# manager file. For NT we suggest jmemnobs.obj, which expects the OS to -# provide adequate virtual memory. -SYSDEPMEM= jmemnobs.obj - -# miscellaneous OS-dependent stuff -# file deletion command -RM= del - -# End of configurable options. - - -# source files: JPEG library proper -LIBSOURCES= jaricom.c jcapimin.c jcapistd.c jcarith.c jccoefct.c jccolor.c \ - jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c \ - jcomapi.c jcparam.c jcprepct.c jcsample.c jctrans.c jdapimin.c \ - jdapistd.c jdarith.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c \ - jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c \ - jdmerge.c jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c \ - jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c jquant1.c \ - jquant2.c jutils.c jmemmgr.c -# memmgr back ends: compile only one of these into a working library -SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c -# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom -APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \ - rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \ - rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c -SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES) -# files included by source files -INCLUDES= jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h jpegint.h \ - jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h -# documentation, test, and support files -DOCS= README install.txt usage.txt cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \ - wrjpgcom.1 wizard.txt example.c libjpeg.txt structure.txt \ - coderules.txt filelist.txt change.log -MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.bcc \ - makefile.mc6 makefile.dj makefile.wat makefile.vc makejdsw.vc6 \ - makeadsw.vc6 makejdep.vc6 makejdsp.vc6 makejmak.vc6 makecdep.vc6 \ - makecdsp.vc6 makecmak.vc6 makeddep.vc6 makeddsp.vc6 makedmak.vc6 \ - maketdep.vc6 maketdsp.vc6 maketmak.vc6 makerdep.vc6 makerdsp.vc6 \ - makermak.vc6 makewdep.vc6 makewdsp.vc6 makewmak.vc6 makejsln.v10 \ - makeasln.v10 makejvcx.v10 makejfil.v10 makecvcx.v10 makecfil.v10 \ - makedvcx.v10 makedfil.v10 maketvcx.v10 maketfil.v10 makervcx.v10 \ - makerfil.v10 makewvcx.v10 makewfil.v10 makeproj.mac makcjpeg.st \ - makdjpeg.st makljpeg.st maktjpeg.st makefile.manx makefile.sas \ - makefile.mms makefile.vms makvms.opt -CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \ - jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \ - jconfig.vms -CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp missing -OTHERFILES= jconfig.txt ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm \ - libjpeg.map -TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \ - testimgp.jpg -DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \ - $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES) -# library object files common to compression and decompression -COMOBJECTS= jaricom.obj jcomapi.obj jutils.obj jerror.obj jmemmgr.obj $(SYSDEPMEM) -# compression library object files -CLIBOBJECTS= jcapimin.obj jcapistd.obj jcarith.obj jctrans.obj jcparam.obj \ - jdatadst.obj jcinit.obj jcmaster.obj jcmarker.obj jcmainct.obj \ - jcprepct.obj jccoefct.obj jccolor.obj jcsample.obj jchuff.obj \ - jcdctmgr.obj jfdctfst.obj jfdctflt.obj jfdctint.obj -# decompression library object files -DLIBOBJECTS= jdapimin.obj jdapistd.obj jdarith.obj jdtrans.obj jdatasrc.obj \ - jdmaster.obj jdinput.obj jdmarker.obj jdhuff.obj jdmainct.obj \ - jdcoefct.obj jdpostct.obj jddctmgr.obj jidctfst.obj jidctflt.obj \ - jidctint.obj jdsample.obj jdcolor.obj jquant1.obj jquant2.obj \ - jdmerge.obj -# These objectfiles are included in libjpeg.lib -LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS) -# object files for sample applications (excluding library files) -COBJECTS= cjpeg.obj rdppm.obj rdgif.obj rdtarga.obj rdrle.obj rdbmp.obj \ - rdswitch.obj cdjpeg.obj -DOBJECTS= djpeg.obj wrppm.obj wrgif.obj wrtarga.obj wrrle.obj wrbmp.obj \ - rdcolmap.obj cdjpeg.obj -TROBJECTS= jpegtran.obj rdswitch.obj cdjpeg.obj transupp.obj - -# Template command for compiling .c to .obj -.c.obj: - $(cc) $(CFLAGS) $*.c - - -all: libjpeg.lib cjpeg.exe djpeg.exe jpegtran.exe rdjpgcom.exe wrjpgcom.exe - -libjpeg.lib: $(LIBOBJECTS) - $(RM) libjpeg.lib - lib -out:libjpeg.lib $(LIBOBJECTS) - -cjpeg.exe: $(COBJECTS) libjpeg.lib - $(link) $(LDFLAGS) -out:cjpeg.exe $(COBJECTS) libjpeg.lib $(LDLIBS) - -djpeg.exe: $(DOBJECTS) libjpeg.lib - $(link) $(LDFLAGS) -out:djpeg.exe $(DOBJECTS) libjpeg.lib $(LDLIBS) - -jpegtran.exe: $(TROBJECTS) libjpeg.lib - $(link) $(LDFLAGS) -out:jpegtran.exe $(TROBJECTS) libjpeg.lib $(LDLIBS) - -rdjpgcom.exe: rdjpgcom.obj - $(link) $(LDFLAGS) -out:rdjpgcom.exe rdjpgcom.obj $(LDLIBS) - -wrjpgcom.exe: wrjpgcom.obj - $(link) $(LDFLAGS) -out:wrjpgcom.exe wrjpgcom.obj $(LDLIBS) - - -clean: - $(RM) *.obj *.exe libjpeg.lib - $(RM) testout* - -setup-vc6: - ren jconfig.vc jconfig.h - ren makejdsw.vc6 jpeg.dsw - ren makeadsw.vc6 apps.dsw - ren makejmak.vc6 jpeg.mak - ren makejdep.vc6 jpeg.dep - ren makejdsp.vc6 jpeg.dsp - ren makecmak.vc6 cjpeg.mak - ren makecdep.vc6 cjpeg.dep - ren makecdsp.vc6 cjpeg.dsp - ren makedmak.vc6 djpeg.mak - ren makeddep.vc6 djpeg.dep - ren makeddsp.vc6 djpeg.dsp - ren maketmak.vc6 jpegtran.mak - ren maketdep.vc6 jpegtran.dep - ren maketdsp.vc6 jpegtran.dsp - ren makermak.vc6 rdjpgcom.mak - ren makerdep.vc6 rdjpgcom.dep - ren makerdsp.vc6 rdjpgcom.dsp - ren makewmak.vc6 wrjpgcom.mak - ren makewdep.vc6 wrjpgcom.dep - ren makewdsp.vc6 wrjpgcom.dsp - -setup-v10: - ren jconfig.vc jconfig.h - ren makejsln.v10 jpeg.sln - ren makeasln.v10 apps.sln - ren makejvcx.v10 jpeg.vcxproj - ren makejfil.v10 jpeg.vcxproj.filters - ren makecvcx.v10 cjpeg.vcxproj - ren makecfil.v10 cjpeg.vcxproj.filters - ren makedvcx.v10 djpeg.vcxproj - ren makedfil.v10 djpeg.vcxproj.filters - ren maketvcx.v10 jpegtran.vcxproj - ren maketfil.v10 jpegtran.vcxproj.filters - ren makervcx.v10 rdjpgcom.vcxproj - ren makerfil.v10 rdjpgcom.vcxproj.filters - ren makewvcx.v10 wrjpgcom.vcxproj - ren makewfil.v10 wrjpgcom.vcxproj.filters - -test: - IF EXIST testout* $(RM) testout* - .\djpeg -dct int -ppm -outfile testout.ppm testorig.jpg - .\djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg - .\cjpeg -dct int -outfile testout.jpg testimg.ppm - .\djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg - .\cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm - .\jpegtran -outfile testoutt.jpg testprog.jpg - fc /b testimg.ppm testout.ppm - fc /b testimg.bmp testout.bmp - fc /b testimg.jpg testout.jpg - fc /b testimg.ppm testoutp.ppm - fc /b testimgp.jpg testoutp.jpg - fc /b testorig.jpg testoutt.jpg - -test-build: - IF EXIST testout* $(RM) testout* - .\djpeg\Release\djpeg -dct int -ppm -outfile testout.ppm testorig.jpg - .\djpeg\Release\djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg - .\cjpeg\Release\cjpeg -dct int -outfile testout.jpg testimg.ppm - .\djpeg\Release\djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg - .\cjpeg\Release\cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm - .\jpegtran\Release\jpegtran -outfile testoutt.jpg testprog.jpg - fc /b testimg.ppm testout.ppm - fc /b testimg.bmp testout.bmp - fc /b testimg.jpg testout.jpg - fc /b testimg.ppm testoutp.ppm - fc /b testimgp.jpg testoutp.jpg - fc /b testorig.jpg testoutt.jpg - - -jaricom.obj: jaricom.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcapimin.obj: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcapistd.obj: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcarith.obj: jcarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jccoefct.obj: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jccolor.obj: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcdctmgr.obj: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jchuff.obj: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcinit.obj: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcmainct.obj: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcmarker.obj: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcmaster.obj: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcomapi.obj: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcparam.obj: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcprepct.obj: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcsample.obj: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jctrans.obj: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdapimin.obj: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdapistd.obj: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdarith.obj: jdarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdatadst.obj: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h -jdatasrc.obj: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h -jdcoefct.obj: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdcolor.obj: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jddctmgr.obj: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jdhuff.obj: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdinput.obj: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdmainct.obj: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdmarker.obj: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdmaster.obj: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdmerge.obj: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdpostct.obj: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdsample.obj: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdtrans.obj: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jerror.obj: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h -jfdctflt.obj: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jfdctfst.obj: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jfdctint.obj: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jidctflt.obj: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jidctfst.obj: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jidctint.obj: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jquant1.obj: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jquant2.obj: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jutils.obj: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jmemmgr.obj: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemansi.obj: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemname.obj: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemnobs.obj: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemdos.obj: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemmac.obj: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -cjpeg.obj: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h -djpeg.obj: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h -jpegtran.obj: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h -rdjpgcom.obj: rdjpgcom.c jinclude.h jconfig.h -wrjpgcom.obj: wrjpgcom.c jinclude.h jconfig.h -cdjpeg.obj: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdcolmap.obj: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdswitch.obj: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -transupp.obj: transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h -rdppm.obj: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrppm.obj: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdgif.obj: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrgif.obj: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdtarga.obj: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrtarga.obj: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdbmp.obj: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrbmp.obj: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdrle.obj: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrrle.obj: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h diff --git a/jpeg/makefile.vms b/jpeg/makefile.vms deleted file mode 100755 index a07d070..0000000 --- a/jpeg/makefile.vms +++ /dev/null @@ -1,142 +0,0 @@ -$! Makefile for Independent JPEG Group's software -$! -$! This is a command procedure for Digital VMS systems that do not have MMS. -$! It builds the JPEG software by brute force, recompiling everything whether -$! or not it is necessary. It then runs the basic self-test. -$! Thanks to Rick Dyson (dyson@iowasp.physics.uiowa.edu) -$! and Tim Bell (tbell@netcom.com) for their help. -$! -$! Read installation instructions before running this!! -$! -$ If F$Mode () .eqs. "INTERACTIVE" -$ Then -$ VERIFY = F$Verify (0) -$ Else -$ VERIFY = F$Verify (1) -$ EndIf -$ On Control_Y Then GoTo End -$ On Error Then GoTo End -$ -$ If F$GetSyi ("HW_MODEL") .gt. 1023 -$ Then -$ OPT = "" -$ Else -$ OPT = ",Sys$Disk:[]makvms.opt/Option" -$ EndIf -$ -$ DoCompile := CC /NoDebug /Optimize /NoList -$! -$ DoCompile jaricom.c -$ DoCompile jcapimin.c -$ DoCompile jcapistd.c -$ DoCompile jcarith.c -$ DoCompile jctrans.c -$ DoCompile jcparam.c -$ DoCompile jdatadst.c -$ DoCompile jcinit.c -$ DoCompile jcmaster.c -$ DoCompile jcmarker.c -$ DoCompile jcmainct.c -$ DoCompile jcprepct.c -$ DoCompile jccoefct.c -$ DoCompile jccolor.c -$ DoCompile jcsample.c -$ DoCompile jchuff.c -$ DoCompile jcdctmgr.c -$ DoCompile jfdctfst.c -$ DoCompile jfdctflt.c -$ DoCompile jfdctint.c -$ DoCompile jdapimin.c -$ DoCompile jdapistd.c -$ DoCompile jdarith.c -$ DoCompile jdtrans.c -$ DoCompile jdatasrc.c -$ DoCompile jdmaster.c -$ DoCompile jdinput.c -$ DoCompile jdmarker.c -$ DoCompile jdhuff.c -$ DoCompile jdmainct.c -$ DoCompile jdcoefct.c -$ DoCompile jdpostct.c -$ DoCompile jddctmgr.c -$ DoCompile jidctfst.c -$ DoCompile jidctflt.c -$ DoCompile jidctint.c -$ DoCompile jdsample.c -$ DoCompile jdcolor.c -$ DoCompile jquant1.c -$ DoCompile jquant2.c -$ DoCompile jdmerge.c -$ DoCompile jcomapi.c -$ DoCompile jutils.c -$ DoCompile jerror.c -$ DoCompile jmemmgr.c -$ DoCompile jmemnobs.c -$! -$ Library /Create libjpeg.olb jaricom.obj,jcapimin.obj,jcapistd.obj, - - jcarith.obj,jctrans.obj,jcparam.obj,jdatadst.obj,jcinit.obj, - - jcmaster.obj,jcmarker.obj,jcmainct.obj,jcprepct.obj,jccoefct.obj, - - jccolor.obj,jcsample.obj,jchuff.obj,jcdctmgr.obj,jfdctfst.obj, - - jfdctflt.obj,jfdctint.obj,jdapimin.obj,jdapistd.obj,jdarith.obj, - - jdtrans.obj,jdatasrc.obj,jdmaster.obj,jdinput.obj,jdmarker.obj, - - jdhuff.obj,jdmainct.obj,jdcoefct.obj,jdpostct.obj,jddctmgr.obj, - - jidctfst.obj,jidctflt.obj,jidctint.obj,jdsample.obj,jdcolor.obj, - - jquant1.obj,jquant2.obj,jdmerge.obj,jcomapi.obj,jutils.obj, - - jerror.obj,jmemmgr.obj,jmemnobs.obj -$! -$ DoCompile cjpeg.c -$ DoCompile rdppm.c -$ DoCompile rdgif.c -$ DoCompile rdtarga.c -$ DoCompile rdrle.c -$ DoCompile rdbmp.c -$ DoCompile rdswitch.c -$ DoCompile cdjpeg.c -$! -$ Link /NoMap /Executable = cjpeg.exe cjpeg.obj,rdppm.obj,rdgif.obj, - - rdtarga.obj,rdrle.obj,rdbmp.obj,rdswitch.obj,cdjpeg.obj,libjpeg.olb/Library'OPT' -$! -$ DoCompile djpeg.c -$ DoCompile wrppm.c -$ DoCompile wrgif.c -$ DoCompile wrtarga.c -$ DoCompile wrrle.c -$ DoCompile wrbmp.c -$ DoCompile rdcolmap.c -$ DoCompile cdjpeg.c -$! -$ Link /NoMap /Executable = djpeg.exe djpeg.obj,wrppm.obj,wrgif.obj, - - wrtarga.obj,wrrle.obj,wrbmp.obj,rdcolmap.obj,cdjpeg.obj,libjpeg.olb/Library'OPT' -$! -$ DoCompile jpegtran.c -$ DoCompile rdswitch.c -$ DoCompile cdjpeg.c -$ DoCompile transupp.c -$! -$ Link /NoMap /Executable = jpegtran.exe jpegtran.obj,rdswitch.obj, - - cdjpeg.obj,transupp.obj,libjpeg.olb/Library'OPT' -$! -$ DoCompile rdjpgcom.c -$ Link /NoMap /Executable = rdjpgcom.exe rdjpgcom.obj'OPT' -$! -$ DoCompile wrjpgcom.c -$ Link /NoMap /Executable = wrjpgcom.exe wrjpgcom.obj'OPT' -$! -$! Run the self-test -$! -$ mcr sys$disk:[]djpeg -dct int -ppm -outfile testout.ppm testorig.jpg -$ mcr sys$disk:[]djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg -$ mcr sys$disk:[]cjpeg -dct int -outfile testout.jpg testimg.ppm -$ mcr sys$disk:[]djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg -$ mcr sys$disk:[]cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm -$ mcr sys$disk:[]jpegtran -outfile testoutt.jpg testprog.jpg -$ Backup /Compare/Log testimg.ppm testout.ppm -$ Backup /Compare/Log testimg.bmp testout.bmp -$ Backup /Compare/Log testimg.jpg testout.jpg -$ Backup /Compare/Log testimg.ppm testoutp.ppm -$ Backup /Compare/Log testimgp.jpg testoutp.jpg -$ Backup /Compare/Log testorig.jpg testoutt.jpg -$! -$End: -$ If Verify Then Set Verify -$ Exit diff --git a/jpeg/makefile.wat b/jpeg/makefile.wat deleted file mode 100755 index a3e652b..0000000 --- a/jpeg/makefile.wat +++ /dev/null @@ -1,240 +0,0 @@ -# Makefile for Independent JPEG Group's software - -# This makefile is suitable for Watcom C/C++ 10.0 on MS-DOS (using -# dos4g extender), OS/2, and Windows NT console mode. -# Thanks to Janos Haide, jhaide@btrvtech.com. - -# Read installation instructions before saying "wmake" !! - -# Uncomment line for desired system -SYSTEM=DOS -#SYSTEM=OS2 -#SYSTEM=NT - -# The name of your C compiler: -CC= wcl386 - -# You may need to adjust these cc options: -CFLAGS= -4r -ort -wx -zq -bt=$(SYSTEM) -# Caution: avoid -ol or -ox; these generate bad code with 10.0 or 10.0a. -# Generally, we recommend defining any configuration symbols in jconfig.h, -# NOT via -D switches here. - -# Link-time cc options: -!ifeq SYSTEM DOS -LDFLAGS= -zq -l=dos4g -!else ifeq SYSTEM OS2 -LDFLAGS= -zq -l=os2v2 -!else ifeq SYSTEM NT -LDFLAGS= -zq -l=nt -!endif - -# Put here the object file name for the correct system-dependent memory -# manager file. jmemnobs should work fine for dos4g or OS/2 environment. -SYSDEPMEM= jmemnobs.obj - -# End of configurable options. - - -# source files: JPEG library proper -LIBSOURCES= jaricom.c jcapimin.c jcapistd.c jcarith.c jccoefct.c jccolor.c & - jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c & - jcomapi.c jcparam.c jcprepct.c jcsample.c jctrans.c jdapimin.c & - jdapistd.c jdarith.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c & - jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c & - jdmerge.c jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c & - jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c jquant1.c & - jquant2.c jutils.c jmemmgr.c -# memmgr back ends: compile only one of these into a working library -SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c -# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom -APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c & - rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c & - rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c -SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES) -# files included by source files -INCLUDES= jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h jpegint.h & - jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h -# documentation, test, and support files -DOCS= README install.txt usage.txt cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 & - wrjpgcom.1 wizard.txt example.c libjpeg.txt structure.txt & - coderules.txt filelist.txt change.log -MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.bcc & - makefile.mc6 makefile.dj makefile.wat makefile.vc makejdsw.vc6 & - makeadsw.vc6 makejdep.vc6 makejdsp.vc6 makejmak.vc6 makecdep.vc6 & - makecdsp.vc6 makecmak.vc6 makeddep.vc6 makeddsp.vc6 makedmak.vc6 & - maketdep.vc6 maketdsp.vc6 maketmak.vc6 makerdep.vc6 makerdsp.vc6 & - makermak.vc6 makewdep.vc6 makewdsp.vc6 makewmak.vc6 makejsln.v10 & - makeasln.v10 makejvcx.v10 makejfil.v10 makecvcx.v10 makecfil.v10 & - makedvcx.v10 makedfil.v10 maketvcx.v10 maketfil.v10 makervcx.v10 & - makerfil.v10 makewvcx.v10 makewfil.v10 makeproj.mac makcjpeg.st & - makdjpeg.st makljpeg.st maktjpeg.st makefile.manx makefile.sas & - makefile.mms makefile.vms makvms.opt -CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat & - jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas & - jconfig.vms -CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp missing -OTHERFILES= jconfig.txt ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm & - libjpeg.map -TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg & - testimgp.jpg -DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) & - $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES) -# library object files common to compression and decompression -COMOBJECTS= jaricom.obj jcomapi.obj jutils.obj jerror.obj jmemmgr.obj $(SYSDEPMEM) -# compression library object files -CLIBOBJECTS= jcapimin.obj jcapistd.obj jcarith.obj jctrans.obj jcparam.obj & - jdatadst.obj jcinit.obj jcmaster.obj jcmarker.obj jcmainct.obj & - jcprepct.obj jccoefct.obj jccolor.obj jcsample.obj jchuff.obj & - jcdctmgr.obj jfdctfst.obj jfdctflt.obj jfdctint.obj -# decompression library object files -DLIBOBJECTS= jdapimin.obj jdapistd.obj jdarith.obj jdtrans.obj jdatasrc.obj & - jdmaster.obj jdinput.obj jdmarker.obj jdhuff.obj jdmainct.obj & - jdcoefct.obj jdpostct.obj jddctmgr.obj jidctfst.obj jidctflt.obj & - jidctint.obj jdsample.obj jdcolor.obj jquant1.obj jquant2.obj & - jdmerge.obj -# These objectfiles are included in libjpeg.lib -LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS) -# object files for sample applications (excluding library files) -COBJECTS= cjpeg.obj rdppm.obj rdgif.obj rdtarga.obj rdrle.obj rdbmp.obj & - rdswitch.obj cdjpeg.obj -DOBJECTS= djpeg.obj wrppm.obj wrgif.obj wrtarga.obj wrrle.obj wrbmp.obj & - rdcolmap.obj cdjpeg.obj -TROBJECTS= jpegtran.obj rdswitch.obj cdjpeg.obj transupp.obj - - -all: libjpeg.lib cjpeg.exe djpeg.exe jpegtran.exe rdjpgcom.exe wrjpgcom.exe - -libjpeg.lib: $(LIBOBJECTS) - - del libjpeg.lib - * wlib -n libjpeg.lib $(LIBOBJECTS) - -cjpeg.exe: $(COBJECTS) libjpeg.lib - $(CC) $(LDFLAGS) $(COBJECTS) libjpeg.lib - -djpeg.exe: $(DOBJECTS) libjpeg.lib - $(CC) $(LDFLAGS) $(DOBJECTS) libjpeg.lib - -jpegtran.exe: $(TROBJECTS) libjpeg.lib - $(CC) $(LDFLAGS) $(TROBJECTS) libjpeg.lib - -rdjpgcom.exe: rdjpgcom.c - $(CC) $(CFLAGS) $(LDFLAGS) rdjpgcom.c - -wrjpgcom.exe: wrjpgcom.c - $(CC) $(CFLAGS) $(LDFLAGS) wrjpgcom.c - -.c.obj: - $(CC) $(CFLAGS) -c $< - -jconfig.h: jconfig.txt - echo You must prepare a system-dependent jconfig.h file. - echo Please read the installation directions in install.txt. - exit 1 - -clean: .SYMBOLIC - - del *.obj - - del libjpeg.lib - - del cjpeg.exe - - del djpeg.exe - - del jpegtran.exe - - del rdjpgcom.exe - - del wrjpgcom.exe - - del testout*.* - -test: cjpeg.exe djpeg.exe jpegtran.exe .SYMBOLIC - - del testout*.* - djpeg -dct int -ppm -outfile testout.ppm testorig.jpg - djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg - cjpeg -dct int -outfile testout.jpg testimg.ppm - djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg - cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm - jpegtran -outfile testoutt.jpg testprog.jpg -!ifeq SYSTEM DOS - fc /b testimg.ppm testout.ppm - fc /b testimg.bmp testout.bmp - fc /b testimg.jpg testout.jpg - fc /b testimg.ppm testoutp.ppm - fc /b testimgp.jpg testoutp.jpg - fc /b testorig.jpg testoutt.jpg -!else - echo n > n.tmp - comp testimg.ppm testout.ppm < n.tmp - comp testimg.bmp testout.bmp < n.tmp - comp testimg.jpg testout.jpg < n.tmp - comp testimg.ppm testoutp.ppm < n.tmp - comp testimgp.jpg testoutp.jpg < n.tmp - comp testorig.jpg testoutt.jpg < n.tmp - del n.tmp -!endif - - -jaricom.obj: jaricom.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcapimin.obj: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcapistd.obj: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcarith.obj: jcarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jccoefct.obj: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jccolor.obj: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcdctmgr.obj: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jchuff.obj: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcinit.obj: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcmainct.obj: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcmarker.obj: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcmaster.obj: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcomapi.obj: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcparam.obj: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcprepct.obj: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcsample.obj: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jctrans.obj: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdapimin.obj: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdapistd.obj: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdarith.obj: jdarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdatadst.obj: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h -jdatasrc.obj: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h -jdcoefct.obj: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdcolor.obj: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jddctmgr.obj: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jdhuff.obj: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdinput.obj: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdmainct.obj: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdmarker.obj: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdmaster.obj: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdmerge.obj: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdpostct.obj: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdsample.obj: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdtrans.obj: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jerror.obj: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h -jfdctflt.obj: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jfdctfst.obj: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jfdctint.obj: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jidctflt.obj: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jidctfst.obj: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jidctint.obj: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jquant1.obj: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jquant2.obj: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jutils.obj: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jmemmgr.obj: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemansi.obj: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemname.obj: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemnobs.obj: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemdos.obj: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemmac.obj: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -cjpeg.obj: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h -djpeg.obj: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h -jpegtran.obj: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h -rdjpgcom.obj: rdjpgcom.c jinclude.h jconfig.h -wrjpgcom.obj: wrjpgcom.c jinclude.h jconfig.h -cdjpeg.obj: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdcolmap.obj: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdswitch.obj: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -transupp.obj: transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h -rdppm.obj: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrppm.obj: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdgif.obj: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrgif.obj: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdtarga.obj: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrtarga.obj: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdbmp.obj: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrbmp.obj: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdrle.obj: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrrle.obj: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h diff --git a/jpeg/makejdep.vc6 b/jpeg/makejdep.vc6 deleted file mode 100755 index d373edf..0000000 --- a/jpeg/makejdep.vc6 +++ /dev/null @@ -1,423 +0,0 @@ -# Microsoft Developer Studio erstellte Abhängigkeitsdatei, einbezogen von jpeg.mak - -.\jaricom.c : \ - ".\jconfig.h"\ - ".\jerror.h"\ - ".\jinclude.h"\ - ".\jmorecfg.h"\ - ".\jpegint.h"\ - ".\jpeglib.h"\ - - -.\jcapimin.c : \ - ".\jconfig.h"\ - ".\jerror.h"\ - ".\jinclude.h"\ - ".\jmorecfg.h"\ - ".\jpegint.h"\ - ".\jpeglib.h"\ - - -.\jcapistd.c : \ - ".\jconfig.h"\ - ".\jerror.h"\ - ".\jinclude.h"\ - ".\jmorecfg.h"\ - ".\jpegint.h"\ - ".\jpeglib.h"\ - - -.\jcarith.c : \ - ".\jconfig.h"\ - ".\jerror.h"\ - ".\jinclude.h"\ - ".\jmorecfg.h"\ - ".\jpegint.h"\ - ".\jpeglib.h"\ - - -.\jccoefct.c : \ - ".\jconfig.h"\ - ".\jerror.h"\ - ".\jinclude.h"\ - ".\jmorecfg.h"\ - ".\jpegint.h"\ - ".\jpeglib.h"\ - - -.\jccolor.c : \ - ".\jconfig.h"\ - ".\jerror.h"\ - ".\jinclude.h"\ - ".\jmorecfg.h"\ - ".\jpegint.h"\ - ".\jpeglib.h"\ - - -.\jcdctmgr.c : \ - ".\jconfig.h"\ - ".\jdct.h"\ - ".\jerror.h"\ - ".\jinclude.h"\ - ".\jmorecfg.h"\ - ".\jpegint.h"\ - ".\jpeglib.h"\ - - -.\jchuff.c : \ - ".\jconfig.h"\ - ".\jerror.h"\ - ".\jinclude.h"\ - ".\jmorecfg.h"\ - ".\jpegint.h"\ - ".\jpeglib.h"\ - - -.\jcinit.c : \ - ".\jconfig.h"\ - ".\jerror.h"\ - ".\jinclude.h"\ - ".\jmorecfg.h"\ - ".\jpegint.h"\ - ".\jpeglib.h"\ - - -.\jcmainct.c : \ - ".\jconfig.h"\ - ".\jerror.h"\ - ".\jinclude.h"\ - ".\jmorecfg.h"\ - ".\jpegint.h"\ - ".\jpeglib.h"\ - - -.\jcmarker.c : \ - ".\jconfig.h"\ - ".\jerror.h"\ - ".\jinclude.h"\ - ".\jmorecfg.h"\ - ".\jpegint.h"\ - ".\jpeglib.h"\ - - -.\jcmaster.c : \ - ".\jconfig.h"\ - ".\jerror.h"\ - ".\jinclude.h"\ - ".\jmorecfg.h"\ - ".\jpegint.h"\ - ".\jpeglib.h"\ - - -.\jcomapi.c : \ - ".\jconfig.h"\ - ".\jerror.h"\ - ".\jinclude.h"\ - ".\jmorecfg.h"\ - ".\jpegint.h"\ - ".\jpeglib.h"\ - - -.\jcparam.c : \ - ".\jconfig.h"\ - ".\jerror.h"\ - ".\jinclude.h"\ - ".\jmorecfg.h"\ - ".\jpegint.h"\ - ".\jpeglib.h"\ - - -.\jcprepct.c : \ - ".\jconfig.h"\ - ".\jerror.h"\ - ".\jinclude.h"\ - ".\jmorecfg.h"\ - ".\jpegint.h"\ - ".\jpeglib.h"\ - - -.\jcsample.c : \ - ".\jconfig.h"\ - ".\jerror.h"\ - ".\jinclude.h"\ - ".\jmorecfg.h"\ - ".\jpegint.h"\ - ".\jpeglib.h"\ - - -.\jctrans.c : \ - ".\jconfig.h"\ - ".\jerror.h"\ - ".\jinclude.h"\ - ".\jmorecfg.h"\ - ".\jpegint.h"\ - ".\jpeglib.h"\ - - -.\jdapimin.c : \ - ".\jconfig.h"\ - ".\jerror.h"\ - ".\jinclude.h"\ - ".\jmorecfg.h"\ - ".\jpegint.h"\ - ".\jpeglib.h"\ - - -.\jdapistd.c : \ - ".\jconfig.h"\ - ".\jerror.h"\ - ".\jinclude.h"\ - ".\jmorecfg.h"\ - ".\jpegint.h"\ - ".\jpeglib.h"\ - - -.\jdarith.c : \ - ".\jconfig.h"\ - ".\jerror.h"\ - ".\jinclude.h"\ - ".\jmorecfg.h"\ - ".\jpegint.h"\ - ".\jpeglib.h"\ - - -.\jdatadst.c : \ - ".\jconfig.h"\ - ".\jerror.h"\ - ".\jinclude.h"\ - ".\jmorecfg.h"\ - ".\jpeglib.h"\ - - -.\jdatasrc.c : \ - ".\jconfig.h"\ - ".\jerror.h"\ - ".\jinclude.h"\ - ".\jmorecfg.h"\ - ".\jpeglib.h"\ - - -.\jdcoefct.c : \ - ".\jconfig.h"\ - ".\jerror.h"\ - ".\jinclude.h"\ - ".\jmorecfg.h"\ - ".\jpegint.h"\ - ".\jpeglib.h"\ - - -.\jdcolor.c : \ - ".\jconfig.h"\ - ".\jerror.h"\ - ".\jinclude.h"\ - ".\jmorecfg.h"\ - ".\jpegint.h"\ - ".\jpeglib.h"\ - - -.\jddctmgr.c : \ - ".\jconfig.h"\ - ".\jdct.h"\ - ".\jerror.h"\ - ".\jinclude.h"\ - ".\jmorecfg.h"\ - ".\jpegint.h"\ - ".\jpeglib.h"\ - - -.\jdhuff.c : \ - ".\jconfig.h"\ - ".\jerror.h"\ - ".\jinclude.h"\ - ".\jmorecfg.h"\ - ".\jpegint.h"\ - ".\jpeglib.h"\ - - -.\jdinput.c : \ - ".\jconfig.h"\ - ".\jerror.h"\ - ".\jinclude.h"\ - ".\jmorecfg.h"\ - ".\jpegint.h"\ - ".\jpeglib.h"\ - - -.\jdmainct.c : \ - ".\jconfig.h"\ - ".\jerror.h"\ - ".\jinclude.h"\ - ".\jmorecfg.h"\ - ".\jpegint.h"\ - ".\jpeglib.h"\ - - -.\jdmarker.c : \ - ".\jconfig.h"\ - ".\jerror.h"\ - ".\jinclude.h"\ - ".\jmorecfg.h"\ - ".\jpegint.h"\ - ".\jpeglib.h"\ - - -.\jdmaster.c : \ - ".\jconfig.h"\ - ".\jerror.h"\ - ".\jinclude.h"\ - ".\jmorecfg.h"\ - ".\jpegint.h"\ - ".\jpeglib.h"\ - - -.\jdmerge.c : \ - ".\jconfig.h"\ - ".\jerror.h"\ - ".\jinclude.h"\ - ".\jmorecfg.h"\ - ".\jpegint.h"\ - ".\jpeglib.h"\ - - -.\jdpostct.c : \ - ".\jconfig.h"\ - ".\jerror.h"\ - ".\jinclude.h"\ - ".\jmorecfg.h"\ - ".\jpegint.h"\ - ".\jpeglib.h"\ - - -.\jdsample.c : \ - ".\jconfig.h"\ - ".\jerror.h"\ - ".\jinclude.h"\ - ".\jmorecfg.h"\ - ".\jpegint.h"\ - ".\jpeglib.h"\ - - -.\jdtrans.c : \ - ".\jconfig.h"\ - ".\jerror.h"\ - ".\jinclude.h"\ - ".\jmorecfg.h"\ - ".\jpegint.h"\ - ".\jpeglib.h"\ - - -.\jerror.c : \ - ".\jconfig.h"\ - ".\jerror.h"\ - ".\jinclude.h"\ - ".\jmorecfg.h"\ - ".\jpeglib.h"\ - ".\jversion.h"\ - - -.\jfdctflt.c : \ - ".\jconfig.h"\ - ".\jdct.h"\ - ".\jerror.h"\ - ".\jinclude.h"\ - ".\jmorecfg.h"\ - ".\jpegint.h"\ - ".\jpeglib.h"\ - - -.\jfdctfst.c : \ - ".\jconfig.h"\ - ".\jdct.h"\ - ".\jerror.h"\ - ".\jinclude.h"\ - ".\jmorecfg.h"\ - ".\jpegint.h"\ - ".\jpeglib.h"\ - - -.\jfdctint.c : \ - ".\jconfig.h"\ - ".\jdct.h"\ - ".\jerror.h"\ - ".\jinclude.h"\ - ".\jmorecfg.h"\ - ".\jpegint.h"\ - ".\jpeglib.h"\ - - -.\jidctflt.c : \ - ".\jconfig.h"\ - ".\jdct.h"\ - ".\jerror.h"\ - ".\jinclude.h"\ - ".\jmorecfg.h"\ - ".\jpegint.h"\ - ".\jpeglib.h"\ - - -.\jidctfst.c : \ - ".\jconfig.h"\ - ".\jdct.h"\ - ".\jerror.h"\ - ".\jinclude.h"\ - ".\jmorecfg.h"\ - ".\jpegint.h"\ - ".\jpeglib.h"\ - - -.\jidctint.c : \ - ".\jconfig.h"\ - ".\jdct.h"\ - ".\jerror.h"\ - ".\jinclude.h"\ - ".\jmorecfg.h"\ - ".\jpegint.h"\ - ".\jpeglib.h"\ - - -.\jmemmgr.c : \ - ".\jconfig.h"\ - ".\jerror.h"\ - ".\jinclude.h"\ - ".\jmemsys.h"\ - ".\jmorecfg.h"\ - ".\jpegint.h"\ - ".\jpeglib.h"\ - - -.\jmemnobs.c : \ - ".\jconfig.h"\ - ".\jerror.h"\ - ".\jinclude.h"\ - ".\jmemsys.h"\ - ".\jmorecfg.h"\ - ".\jpegint.h"\ - ".\jpeglib.h"\ - - -.\jquant1.c : \ - ".\jconfig.h"\ - ".\jerror.h"\ - ".\jinclude.h"\ - ".\jmorecfg.h"\ - ".\jpegint.h"\ - ".\jpeglib.h"\ - - -.\jquant2.c : \ - ".\jconfig.h"\ - ".\jerror.h"\ - ".\jinclude.h"\ - ".\jmorecfg.h"\ - ".\jpegint.h"\ - ".\jpeglib.h"\ - - -.\jutils.c : \ - ".\jconfig.h"\ - ".\jerror.h"\ - ".\jinclude.h"\ - ".\jmorecfg.h"\ - ".\jpegint.h"\ - ".\jpeglib.h"\ - diff --git a/jpeg/makejdsp.vc6 b/jpeg/makejdsp.vc6 deleted file mode 100755 index 2576fc2..0000000 --- a/jpeg/makejdsp.vc6 +++ /dev/null @@ -1,285 +0,0 @@ -# Microsoft Developer Studio Project File - Name="jpeg" - Package Owner=<4> -# Microsoft Developer Studio Generated Build File, Format Version 6.00 -# ** NICHT BEARBEITEN ** - -# TARGTYPE "Win32 (x86) Static Library" 0x0104 - -CFG=jpeg - Win32 -!MESSAGE Dies ist kein gültiges Makefile. Zum Erstellen dieses Projekts mit NMAKE -!MESSAGE verwenden Sie den Befehl "Makefile exportieren" und führen Sie den Befehl -!MESSAGE -!MESSAGE NMAKE /f "jpeg.mak". -!MESSAGE -!MESSAGE Sie können beim Ausführen von NMAKE eine Konfiguration angeben -!MESSAGE durch Definieren des Makros CFG in der Befehlszeile. Zum Beispiel: -!MESSAGE -!MESSAGE NMAKE /f "jpeg.mak" CFG="jpeg - Win32" -!MESSAGE -!MESSAGE Für die Konfiguration stehen zur Auswahl: -!MESSAGE -!MESSAGE "jpeg - Win32" (basierend auf "Win32 (x86) Static Library") -!MESSAGE - -# Begin Project -# PROP AllowPerConfigDependencies 0 -# PROP Scc_ProjName "" -# PROP Scc_LocalPath "" -CPP=cl.exe -RSC=rc.exe -# PROP BASE Use_MFC 0 -# PROP BASE Use_Debug_Libraries 0 -# PROP BASE Output_Dir ".\Release" -# PROP BASE Intermediate_Dir ".\Release" -# PROP BASE Target_Dir "" -# PROP Use_MFC 0 -# PROP Use_Debug_Libraries 0 -# PROP Output_Dir ".\Release" -# PROP Intermediate_Dir ".\Release" -# PROP Target_Dir "" -# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /YX /c -# ADD CPP /nologo /G6 /MT /W3 /GX /Ox /Oa /Ob2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /YX /FD /c -# ADD BASE RSC /l 0x407 -# ADD RSC /l 0x407 -BSC32=bscmake.exe -# ADD BASE BSC32 /nologo -# ADD BSC32 /nologo -LIB32=link.exe -lib -# ADD BASE LIB32 /nologo -# ADD LIB32 /nologo -# Begin Target - -# Name "jpeg - Win32" -# Begin Group "Quellcodedateien" - -# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat;for;f90" -# Begin Source File - -SOURCE=.\jaricom.c -# End Source File -# Begin Source File - -SOURCE=.\jcapimin.c -# End Source File -# Begin Source File - -SOURCE=.\jcapistd.c -# End Source File -# Begin Source File - -SOURCE=.\jcarith.c -# End Source File -# Begin Source File - -SOURCE=.\jccoefct.c -# End Source File -# Begin Source File - -SOURCE=.\jccolor.c -# End Source File -# Begin Source File - -SOURCE=.\jcdctmgr.c -# End Source File -# Begin Source File - -SOURCE=.\jchuff.c -# End Source File -# Begin Source File - -SOURCE=.\jcinit.c -# End Source File -# Begin Source File - -SOURCE=.\jcmainct.c -# End Source File -# Begin Source File - -SOURCE=.\jcmarker.c -# End Source File -# Begin Source File - -SOURCE=.\jcmaster.c -# End Source File -# Begin Source File - -SOURCE=.\jcomapi.c -# End Source File -# Begin Source File - -SOURCE=.\jcparam.c -# End Source File -# Begin Source File - -SOURCE=.\jcprepct.c -# End Source File -# Begin Source File - -SOURCE=.\jcsample.c -# End Source File -# Begin Source File - -SOURCE=.\jctrans.c -# End Source File -# Begin Source File - -SOURCE=.\jdapimin.c -# End Source File -# Begin Source File - -SOURCE=.\jdapistd.c -# End Source File -# Begin Source File - -SOURCE=.\jdarith.c -# End Source File -# Begin Source File - -SOURCE=.\jdatadst.c -# End Source File -# Begin Source File - -SOURCE=.\jdatasrc.c -# End Source File -# Begin Source File - -SOURCE=.\jdcoefct.c -# End Source File -# Begin Source File - -SOURCE=.\jdcolor.c -# End Source File -# Begin Source File - -SOURCE=.\jddctmgr.c -# End Source File -# Begin Source File - -SOURCE=.\jdhuff.c -# End Source File -# Begin Source File - -SOURCE=.\jdinput.c -# End Source File -# Begin Source File - -SOURCE=.\jdmainct.c -# End Source File -# Begin Source File - -SOURCE=.\jdmarker.c -# End Source File -# Begin Source File - -SOURCE=.\jdmaster.c -# End Source File -# Begin Source File - -SOURCE=.\jdmerge.c -# End Source File -# Begin Source File - -SOURCE=.\jdpostct.c -# End Source File -# Begin Source File - -SOURCE=.\jdsample.c -# End Source File -# Begin Source File - -SOURCE=.\jdtrans.c -# End Source File -# Begin Source File - -SOURCE=.\jerror.c -# End Source File -# Begin Source File - -SOURCE=.\jfdctflt.c -# End Source File -# Begin Source File - -SOURCE=.\jfdctfst.c -# End Source File -# Begin Source File - -SOURCE=.\jfdctint.c -# End Source File -# Begin Source File - -SOURCE=.\jidctflt.c -# End Source File -# Begin Source File - -SOURCE=.\jidctfst.c -# End Source File -# Begin Source File - -SOURCE=.\jidctint.c -# End Source File -# Begin Source File - -SOURCE=.\jmemmgr.c -# End Source File -# Begin Source File - -SOURCE=.\jmemnobs.c -# End Source File -# Begin Source File - -SOURCE=.\jquant1.c -# End Source File -# Begin Source File - -SOURCE=.\jquant2.c -# End Source File -# Begin Source File - -SOURCE=.\jutils.c -# End Source File -# End Group -# Begin Group "Header-Dateien" - -# PROP Default_Filter "h;hpp;hxx;hm;inl;fi;fd" -# Begin Source File - -SOURCE=.\jconfig.h -# End Source File -# Begin Source File - -SOURCE=.\jdct.h -# End Source File -# Begin Source File - -SOURCE=.\jerror.h -# End Source File -# Begin Source File - -SOURCE=.\jinclude.h -# End Source File -# Begin Source File - -SOURCE=.\jmemsys.h -# End Source File -# Begin Source File - -SOURCE=.\jmorecfg.h -# End Source File -# Begin Source File - -SOURCE=.\jpegint.h -# End Source File -# Begin Source File - -SOURCE=.\jpeglib.h -# End Source File -# Begin Source File - -SOURCE=.\jversion.h -# End Source File -# End Group -# Begin Group "Ressourcendateien" - -# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;cnt;rtf;gif;jpg;jpeg;jpe" -# End Group -# End Target -# End Project diff --git a/jpeg/makejdsw.vc6 b/jpeg/makejdsw.vc6 deleted file mode 100755 index 8913f62..0000000 --- a/jpeg/makejdsw.vc6 +++ /dev/null @@ -1,29 +0,0 @@ -Microsoft Developer Studio Workspace File, Format Version 6.00 -# WARNUNG: DIESE ARBEITSBEREICHSDATEI DARF NICHT BEARBEITET ODER GELÖSCHT WERDEN! - -############################################################################### - -Project: "jpeg"=".\jpeg.dsp" - Package Owner=<4> - -Package=<5> -{{{ -}}} - -Package=<4> -{{{ -}}} - -############################################################################### - -Global: - -Package=<5> -{{{ -}}} - -Package=<3> -{{{ -}}} - -############################################################################### - diff --git a/jpeg/makejfil.v10 b/jpeg/makejfil.v10 deleted file mode 100755 index 5accea2..0000000 --- a/jpeg/makejfil.v10 +++ /dev/null @@ -1,186 +0,0 @@ - - - - - {4FC737F1-C7A5-4376-A066-2A32D752A2FF} - cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx - - - {93995380-89BD-4b04-88EB-625FBE52EBFB} - h;hpp;hxx;hm;inl;inc;xsd - - - {67DA6AB6-F800-4c08-8B7A-83BB121AAD01} - rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav;mfcribbon-ms - - - - - Header Files - - - Header Files - - - Header Files - - - Header Files - - - Header Files - - - Header Files - - - Header Files - - - Header Files - - - Header Files - - - - - Source Files - - - Source Files - - - Source Files - - - Source Files - - - Source Files - - - Source Files - - - Source Files - - - Source Files - - - Source Files - - - Source Files - - - Source Files - - - Source Files - - - Source Files - - - Source Files - - - Source Files - - - Source Files - - - Source Files - - - Source Files - - - Source Files - - - Source Files - - - Source Files - - - Source Files - - - Source Files - - - Source Files - - - Source Files - - - Source Files - - - Source Files - - - Source Files - - - Source Files - - - Source Files - - - Source Files - - - Source Files - - - Source Files - - - Source Files - - - Source Files - - - Source Files - - - Source Files - - - Source Files - - - Source Files - - - Source Files - - - Source Files - - - Source Files - - - Source Files - - - Source Files - - - Source Files - - - Source Files - - - \ No newline at end of file diff --git a/jpeg/makejmak.vc6 b/jpeg/makejmak.vc6 deleted file mode 100755 index 88a4eb3..0000000 --- a/jpeg/makejmak.vc6 +++ /dev/null @@ -1,425 +0,0 @@ -# Microsoft Developer Studio Generated NMAKE File, Based on jpeg.dsp -!IF "$(CFG)" == "" -CFG=jpeg - Win32 -!MESSAGE Keine Konfiguration angegeben. jpeg - Win32 wird als Standard verwendet. -!ENDIF - -!IF "$(CFG)" != "jpeg - Win32" -!MESSAGE Ungltige Konfiguration "$(CFG)" angegeben. -!MESSAGE Sie k”nnen beim Ausfhren von NMAKE eine Konfiguration angeben -!MESSAGE durch Definieren des Makros CFG in der Befehlszeile. Zum Beispiel: -!MESSAGE -!MESSAGE NMAKE /f "jpeg.mak" CFG="jpeg - Win32" -!MESSAGE -!MESSAGE Fr die Konfiguration stehen zur Auswahl: -!MESSAGE -!MESSAGE "jpeg - Win32" (basierend auf "Win32 (x86) Static Library") -!MESSAGE -!ERROR Eine ungltige Konfiguration wurde angegeben. -!ENDIF - -!IF "$(OS)" == "Windows_NT" -NULL= -!ELSE -NULL=nul -!ENDIF - -OUTDIR=.\Release -INTDIR=.\Release -# Begin Custom Macros -OutDir=.\Release -# End Custom Macros - -ALL : "$(OUTDIR)\jpeg.lib" - - -CLEAN : - -@erase "$(INTDIR)\jaricom.obj" - -@erase "$(INTDIR)\jcapimin.obj" - -@erase "$(INTDIR)\jcapistd.obj" - -@erase "$(INTDIR)\jcarith.obj" - -@erase "$(INTDIR)\jccoefct.obj" - -@erase "$(INTDIR)\jccolor.obj" - -@erase "$(INTDIR)\jcdctmgr.obj" - -@erase "$(INTDIR)\jchuff.obj" - -@erase "$(INTDIR)\jcinit.obj" - -@erase "$(INTDIR)\jcmainct.obj" - -@erase "$(INTDIR)\jcmarker.obj" - -@erase "$(INTDIR)\jcmaster.obj" - -@erase "$(INTDIR)\jcomapi.obj" - -@erase "$(INTDIR)\jcparam.obj" - -@erase "$(INTDIR)\jcprepct.obj" - -@erase "$(INTDIR)\jcsample.obj" - -@erase "$(INTDIR)\jctrans.obj" - -@erase "$(INTDIR)\jdapimin.obj" - -@erase "$(INTDIR)\jdapistd.obj" - -@erase "$(INTDIR)\jdarith.obj" - -@erase "$(INTDIR)\jdatadst.obj" - -@erase "$(INTDIR)\jdatasrc.obj" - -@erase "$(INTDIR)\jdcoefct.obj" - -@erase "$(INTDIR)\jdcolor.obj" - -@erase "$(INTDIR)\jddctmgr.obj" - -@erase "$(INTDIR)\jdhuff.obj" - -@erase "$(INTDIR)\jdinput.obj" - -@erase "$(INTDIR)\jdmainct.obj" - -@erase "$(INTDIR)\jdmarker.obj" - -@erase "$(INTDIR)\jdmaster.obj" - -@erase "$(INTDIR)\jdmerge.obj" - -@erase "$(INTDIR)\jdpostct.obj" - -@erase "$(INTDIR)\jdsample.obj" - -@erase "$(INTDIR)\jdtrans.obj" - -@erase "$(INTDIR)\jerror.obj" - -@erase "$(INTDIR)\jfdctflt.obj" - -@erase "$(INTDIR)\jfdctfst.obj" - -@erase "$(INTDIR)\jfdctint.obj" - -@erase "$(INTDIR)\jidctflt.obj" - -@erase "$(INTDIR)\jidctfst.obj" - -@erase "$(INTDIR)\jidctint.obj" - -@erase "$(INTDIR)\jmemmgr.obj" - -@erase "$(INTDIR)\jmemnobs.obj" - -@erase "$(INTDIR)\jquant1.obj" - -@erase "$(INTDIR)\jquant2.obj" - -@erase "$(INTDIR)\jutils.obj" - -@erase "$(INTDIR)\vc60.idb" - -@erase "$(OUTDIR)\jpeg.lib" - -"$(OUTDIR)" : - if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)" - -CPP=cl.exe -CPP_PROJ=/nologo /G6 /MT /W3 /GX /Ox /Oa /Ob2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /Fp"$(INTDIR)\jpeg.pch" /YX /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /c - -.c{$(INTDIR)}.obj:: - $(CPP) @<< - $(CPP_PROJ) $< -<< - -.cpp{$(INTDIR)}.obj:: - $(CPP) @<< - $(CPP_PROJ) $< -<< - -.cxx{$(INTDIR)}.obj:: - $(CPP) @<< - $(CPP_PROJ) $< -<< - -.c{$(INTDIR)}.sbr:: - $(CPP) @<< - $(CPP_PROJ) $< -<< - -.cpp{$(INTDIR)}.sbr:: - $(CPP) @<< - $(CPP_PROJ) $< -<< - -.cxx{$(INTDIR)}.sbr:: - $(CPP) @<< - $(CPP_PROJ) $< -<< - -RSC=rc.exe -BSC32=bscmake.exe -BSC32_FLAGS=/nologo /o"$(OUTDIR)\jpeg.bsc" -BSC32_SBRS= \ - -LIB32=link.exe -lib -LIB32_FLAGS=/nologo /out:"$(OUTDIR)\jpeg.lib" -LIB32_OBJS= \ - "$(INTDIR)\jaricom.obj" \ - "$(INTDIR)\jcapimin.obj" \ - "$(INTDIR)\jcapistd.obj" \ - "$(INTDIR)\jcarith.obj" \ - "$(INTDIR)\jccoefct.obj" \ - "$(INTDIR)\jccolor.obj" \ - "$(INTDIR)\jcdctmgr.obj" \ - "$(INTDIR)\jchuff.obj" \ - "$(INTDIR)\jcinit.obj" \ - "$(INTDIR)\jcmainct.obj" \ - "$(INTDIR)\jcmarker.obj" \ - "$(INTDIR)\jcmaster.obj" \ - "$(INTDIR)\jcomapi.obj" \ - "$(INTDIR)\jcparam.obj" \ - "$(INTDIR)\jcprepct.obj" \ - "$(INTDIR)\jcsample.obj" \ - "$(INTDIR)\jctrans.obj" \ - "$(INTDIR)\jdapimin.obj" \ - "$(INTDIR)\jdapistd.obj" \ - "$(INTDIR)\jdarith.obj" \ - "$(INTDIR)\jdatadst.obj" \ - "$(INTDIR)\jdatasrc.obj" \ - "$(INTDIR)\jdcoefct.obj" \ - "$(INTDIR)\jdcolor.obj" \ - "$(INTDIR)\jddctmgr.obj" \ - "$(INTDIR)\jdhuff.obj" \ - "$(INTDIR)\jdinput.obj" \ - "$(INTDIR)\jdmainct.obj" \ - "$(INTDIR)\jdmarker.obj" \ - "$(INTDIR)\jdmaster.obj" \ - "$(INTDIR)\jdmerge.obj" \ - "$(INTDIR)\jdpostct.obj" \ - "$(INTDIR)\jdsample.obj" \ - "$(INTDIR)\jdtrans.obj" \ - "$(INTDIR)\jerror.obj" \ - "$(INTDIR)\jfdctflt.obj" \ - "$(INTDIR)\jfdctfst.obj" \ - "$(INTDIR)\jfdctint.obj" \ - "$(INTDIR)\jidctflt.obj" \ - "$(INTDIR)\jidctfst.obj" \ - "$(INTDIR)\jidctint.obj" \ - "$(INTDIR)\jmemmgr.obj" \ - "$(INTDIR)\jmemnobs.obj" \ - "$(INTDIR)\jquant1.obj" \ - "$(INTDIR)\jquant2.obj" \ - "$(INTDIR)\jutils.obj" - -"$(OUTDIR)\jpeg.lib" : "$(OUTDIR)" $(DEF_FILE) $(LIB32_OBJS) - $(LIB32) @<< - $(LIB32_FLAGS) $(DEF_FLAGS) $(LIB32_OBJS) -<< - - -!IF "$(NO_EXTERNAL_DEPS)" != "1" -!IF EXISTS("jpeg.dep") -!INCLUDE "jpeg.dep" -!ELSE -!MESSAGE Warning: cannot find "jpeg.dep" -!ENDIF -!ENDIF - - -!IF "$(CFG)" == "jpeg - Win32" -SOURCE=.\jaricom.c - -"$(INTDIR)\jaricom.obj" : $(SOURCE) "$(INTDIR)" - - -SOURCE=.\jcapimin.c - -"$(INTDIR)\jcapimin.obj" : $(SOURCE) "$(INTDIR)" - - -SOURCE=.\jcapistd.c - -"$(INTDIR)\jcapistd.obj" : $(SOURCE) "$(INTDIR)" - - -SOURCE=.\jcarith.c - -"$(INTDIR)\jcarith.obj" : $(SOURCE) "$(INTDIR)" - - -SOURCE=.\jccoefct.c - -"$(INTDIR)\jccoefct.obj" : $(SOURCE) "$(INTDIR)" - - -SOURCE=.\jccolor.c - -"$(INTDIR)\jccolor.obj" : $(SOURCE) "$(INTDIR)" - - -SOURCE=.\jcdctmgr.c - -"$(INTDIR)\jcdctmgr.obj" : $(SOURCE) "$(INTDIR)" - - -SOURCE=.\jchuff.c - -"$(INTDIR)\jchuff.obj" : $(SOURCE) "$(INTDIR)" - - -SOURCE=.\jcinit.c - -"$(INTDIR)\jcinit.obj" : $(SOURCE) "$(INTDIR)" - - -SOURCE=.\jcmainct.c - -"$(INTDIR)\jcmainct.obj" : $(SOURCE) "$(INTDIR)" - - -SOURCE=.\jcmarker.c - -"$(INTDIR)\jcmarker.obj" : $(SOURCE) "$(INTDIR)" - - -SOURCE=.\jcmaster.c - -"$(INTDIR)\jcmaster.obj" : $(SOURCE) "$(INTDIR)" - - -SOURCE=.\jcomapi.c - -"$(INTDIR)\jcomapi.obj" : $(SOURCE) "$(INTDIR)" - - -SOURCE=.\jcparam.c - -"$(INTDIR)\jcparam.obj" : $(SOURCE) "$(INTDIR)" - - -SOURCE=.\jcprepct.c - -"$(INTDIR)\jcprepct.obj" : $(SOURCE) "$(INTDIR)" - - -SOURCE=.\jcsample.c - -"$(INTDIR)\jcsample.obj" : $(SOURCE) "$(INTDIR)" - - -SOURCE=.\jctrans.c - -"$(INTDIR)\jctrans.obj" : $(SOURCE) "$(INTDIR)" - - -SOURCE=.\jdapimin.c - -"$(INTDIR)\jdapimin.obj" : $(SOURCE) "$(INTDIR)" - - -SOURCE=.\jdapistd.c - -"$(INTDIR)\jdapistd.obj" : $(SOURCE) "$(INTDIR)" - - -SOURCE=.\jdarith.c - -"$(INTDIR)\jdarith.obj" : $(SOURCE) "$(INTDIR)" - - -SOURCE=.\jdatadst.c - -"$(INTDIR)\jdatadst.obj" : $(SOURCE) "$(INTDIR)" - - -SOURCE=.\jdatasrc.c - -"$(INTDIR)\jdatasrc.obj" : $(SOURCE) "$(INTDIR)" - - -SOURCE=.\jdcoefct.c - -"$(INTDIR)\jdcoefct.obj" : $(SOURCE) "$(INTDIR)" - - -SOURCE=.\jdcolor.c - -"$(INTDIR)\jdcolor.obj" : $(SOURCE) "$(INTDIR)" - - -SOURCE=.\jddctmgr.c - -"$(INTDIR)\jddctmgr.obj" : $(SOURCE) "$(INTDIR)" - - -SOURCE=.\jdhuff.c - -"$(INTDIR)\jdhuff.obj" : $(SOURCE) "$(INTDIR)" - - -SOURCE=.\jdinput.c - -"$(INTDIR)\jdinput.obj" : $(SOURCE) "$(INTDIR)" - - -SOURCE=.\jdmainct.c - -"$(INTDIR)\jdmainct.obj" : $(SOURCE) "$(INTDIR)" - - -SOURCE=.\jdmarker.c - -"$(INTDIR)\jdmarker.obj" : $(SOURCE) "$(INTDIR)" - - -SOURCE=.\jdmaster.c - -"$(INTDIR)\jdmaster.obj" : $(SOURCE) "$(INTDIR)" - - -SOURCE=.\jdmerge.c - -"$(INTDIR)\jdmerge.obj" : $(SOURCE) "$(INTDIR)" - - -SOURCE=.\jdpostct.c - -"$(INTDIR)\jdpostct.obj" : $(SOURCE) "$(INTDIR)" - - -SOURCE=.\jdsample.c - -"$(INTDIR)\jdsample.obj" : $(SOURCE) "$(INTDIR)" - - -SOURCE=.\jdtrans.c - -"$(INTDIR)\jdtrans.obj" : $(SOURCE) "$(INTDIR)" - - -SOURCE=.\jerror.c - -"$(INTDIR)\jerror.obj" : $(SOURCE) "$(INTDIR)" - - -SOURCE=.\jfdctflt.c - -"$(INTDIR)\jfdctflt.obj" : $(SOURCE) "$(INTDIR)" - - -SOURCE=.\jfdctfst.c - -"$(INTDIR)\jfdctfst.obj" : $(SOURCE) "$(INTDIR)" - - -SOURCE=.\jfdctint.c - -"$(INTDIR)\jfdctint.obj" : $(SOURCE) "$(INTDIR)" - - -SOURCE=.\jidctflt.c - -"$(INTDIR)\jidctflt.obj" : $(SOURCE) "$(INTDIR)" - - -SOURCE=.\jidctfst.c - -"$(INTDIR)\jidctfst.obj" : $(SOURCE) "$(INTDIR)" - - -SOURCE=.\jidctint.c - -"$(INTDIR)\jidctint.obj" : $(SOURCE) "$(INTDIR)" - - -SOURCE=.\jmemmgr.c - -"$(INTDIR)\jmemmgr.obj" : $(SOURCE) "$(INTDIR)" - - -SOURCE=.\jmemnobs.c - -"$(INTDIR)\jmemnobs.obj" : $(SOURCE) "$(INTDIR)" - - -SOURCE=.\jquant1.c - -"$(INTDIR)\jquant1.obj" : $(SOURCE) "$(INTDIR)" - - -SOURCE=.\jquant2.c - -"$(INTDIR)\jquant2.obj" : $(SOURCE) "$(INTDIR)" - - -SOURCE=.\jutils.c - -"$(INTDIR)\jutils.obj" : $(SOURCE) "$(INTDIR)" - - - -!ENDIF - diff --git a/jpeg/makejsln.v10 b/jpeg/makejsln.v10 deleted file mode 100755 index 292de1f..0000000 --- a/jpeg/makejsln.v10 +++ /dev/null @@ -1,17 +0,0 @@ - -Microsoft Visual Studio Solution File, Format Version 11.00 -# Visual C++ Express 2010 -Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "jpeg", "jpeg.vcxproj", "{019DBD2A-273D-4BA4-BF86-B5EFE2ED76B1}" -EndProject -Global - GlobalSection(SolutionConfigurationPlatforms) = preSolution - Release|Win32 = Release|Win32 - EndGlobalSection - GlobalSection(ProjectConfigurationPlatforms) = postSolution - {019DBD2A-273D-4BA4-BF86-B5EFE2ED76B1}.Release|Win32.ActiveCfg = Release|Win32 - {019DBD2A-273D-4BA4-BF86-B5EFE2ED76B1}.Release|Win32.Build.0 = Release|Win32 - EndGlobalSection - GlobalSection(SolutionProperties) = preSolution - HideSolutionNode = FALSE - EndGlobalSection -EndGlobal diff --git a/jpeg/makejvcx.v10 b/jpeg/makejvcx.v10 deleted file mode 100755 index c7a898e..0000000 --- a/jpeg/makejvcx.v10 +++ /dev/null @@ -1,112 +0,0 @@ - - - - - Release - Win32 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Disabled - false - - - - - {019DBD2A-273D-4BA4-BF86-B5EFE2ED76B1} - Win32Proj - jpeg - - - - StaticLibrary - false - true - Unicode - - - - - - - - - - - - Level3 - NotUsing - Full - true - false - WIN32;NDEBUG;_LIB;_CRT_SECURE_NO_WARNINGS - true - true - - - Windows - true - true - true - - - - - - \ No newline at end of file diff --git a/jpeg/makeproj.mac b/jpeg/makeproj.mac deleted file mode 100755 index e5b5102..0000000 --- a/jpeg/makeproj.mac +++ /dev/null @@ -1,213 +0,0 @@ --- --- makeproj.mac --- --- This AppleScript builds Code Warrior PRO Release 2 project files for the --- libjpeg library as well as the test programs 'cjpeg', 'djpeg', 'jpegtran'. --- (We'd distribute real project files, except they're not text --- and would create maintenance headaches.) --- --- The script then compiles and links the library and the test programs. --- NOTE: if you haven't already created a 'jconfig.h' file, the script --- automatically copies 'jconfig.mac' to 'jconfig.h'. --- --- To use this script, you must have AppleScript 1.1 or later installed --- and a suitable AppleScript editor like Script Editor or Script Debugger --- (http://www.latenightsw.com). Open this file with your AppleScript --- editor and execute the "run" command to build the projects. --- --- Thanks to Dan Sears and Don Agro for this script. --- Questions about this script can be addressed to dogpark@interlog.com --- - -on run - - choose folder with prompt ">>> Select IJG source folder <<<" - set ijg_folder to result - - choose folder with prompt ">>> Select MetroWerks folder <<<" - set cw_folder to result - - -- if jconfig.h doesn't already exist, copy jconfig.mac - - tell application "Finder" - if not (exists file "jconfig.h" of ijg_folder) then - duplicate {file "jconfig.mac" of folder ijg_folder} - select file "jconfig.mac copy" of folder ijg_folder - set name of selection to "jconfig.h" - end if - end tell - - tell application "CodeWarrior IDE 2.1" - with timeout of 10000 seconds - - -- create libjpeg project - - activate - Create Project (ijg_folder as string) & "libjpeg.proj" - Set Preferences of panel "Target Settings" to {Target Name:"libjpeg"} - Set Preferences of panel "PPC Project" to {File Name:"libjpeg"} - Set Preferences of panel "Target Settings" to {Linker:"MacOS PPC Linker"} - Set Preferences of panel "PPC Project" to {Project Type:library} - Set Preferences of panel "C/C++ Compiler" to {ANSI Strict:true} - Set Preferences of panel "C/C++ Compiler" to {Enums Always Ints:true} - Set Preferences of panel "PPC Codegen" to {Struct Alignment:PowerPC} - Set Preferences of panel "PPC Linker" to {Generate SYM File:false} - - Add Files (ijg_folder as string) & "jaricom.c" To Segment 1 - Add Files (ijg_folder as string) & "jcapimin.c" To Segment 1 - Add Files (ijg_folder as string) & "jcapistd.c" To Segment 1 - Add Files (ijg_folder as string) & "jcarith.c" To Segment 1 - Add Files (ijg_folder as string) & "jctrans.c" To Segment 1 - Add Files (ijg_folder as string) & "jcparam.c" To Segment 1 - Add Files (ijg_folder as string) & "jdatadst.c" To Segment 1 - Add Files (ijg_folder as string) & "jcinit.c" To Segment 1 - Add Files (ijg_folder as string) & "jcmaster.c" To Segment 1 - Add Files (ijg_folder as string) & "jcmarker.c" To Segment 1 - Add Files (ijg_folder as string) & "jcmainct.c" To Segment 1 - Add Files (ijg_folder as string) & "jcprepct.c" To Segment 1 - Add Files (ijg_folder as string) & "jccoefct.c" To Segment 1 - Add Files (ijg_folder as string) & "jccolor.c" To Segment 1 - Add Files (ijg_folder as string) & "jcsample.c" To Segment 1 - Add Files (ijg_folder as string) & "jchuff.c" To Segment 1 - Add Files (ijg_folder as string) & "jcdctmgr.c" To Segment 1 - Add Files (ijg_folder as string) & "jfdctfst.c" To Segment 1 - Add Files (ijg_folder as string) & "jfdctflt.c" To Segment 1 - Add Files (ijg_folder as string) & "jfdctint.c" To Segment 1 - Add Files (ijg_folder as string) & "jdapimin.c" To Segment 1 - Add Files (ijg_folder as string) & "jdapistd.c" To Segment 1 - Add Files (ijg_folder as string) & "jdarith.c" To Segment 1 - Add Files (ijg_folder as string) & "jdtrans.c" To Segment 1 - Add Files (ijg_folder as string) & "jdatasrc.c" To Segment 1 - Add Files (ijg_folder as string) & "jdmaster.c" To Segment 1 - Add Files (ijg_folder as string) & "jdinput.c" To Segment 1 - Add Files (ijg_folder as string) & "jdmarker.c" To Segment 1 - Add Files (ijg_folder as string) & "jdhuff.c" To Segment 1 - Add Files (ijg_folder as string) & "jdmainct.c" To Segment 1 - Add Files (ijg_folder as string) & "jdcoefct.c" To Segment 1 - Add Files (ijg_folder as string) & "jdpostct.c" To Segment 1 - Add Files (ijg_folder as string) & "jddctmgr.c" To Segment 1 - Add Files (ijg_folder as string) & "jidctfst.c" To Segment 1 - Add Files (ijg_folder as string) & "jidctflt.c" To Segment 1 - Add Files (ijg_folder as string) & "jidctint.c" To Segment 1 - Add Files (ijg_folder as string) & "jdsample.c" To Segment 1 - Add Files (ijg_folder as string) & "jdcolor.c" To Segment 1 - Add Files (ijg_folder as string) & "jquant1.c" To Segment 1 - Add Files (ijg_folder as string) & "jquant2.c" To Segment 1 - Add Files (ijg_folder as string) & "jdmerge.c" To Segment 1 - Add Files (ijg_folder as string) & "jcomapi.c" To Segment 1 - Add Files (ijg_folder as string) & "jutils.c" To Segment 1 - Add Files (ijg_folder as string) & "jerror.c" To Segment 1 - Add Files (ijg_folder as string) & "jmemmgr.c" To Segment 1 - Add Files (ijg_folder as string) & "jmemmac.c" To Segment 1 - - -- compile and link the library - - Make Project - Close Project - - -- create cjpeg project - - activate - Create Project (ijg_folder as string) & "cjpeg.proj" - Set Preferences of panel "Target Settings" to {Target Name:"cjpeg"} - Set Preferences of panel "PPC Project" to {File Name:"cjpeg"} - Set Preferences of panel "Target Settings" to {Linker:"MacOS PPC Linker"} - Set Preferences of panel "C/C++ Compiler" to {ANSI Strict:true} - Set Preferences of panel "C/C++ Compiler" to {Enums Always Ints:true} - Set Preferences of panel "PPC Codegen" to {Struct Alignment:PowerPC} - Set Preferences of panel "PPC Linker" to {Generate SYM File:false} - - Add Files (ijg_folder as string) & "cjpeg.c" To Segment 1 - Add Files (ijg_folder as string) & "rdppm.c" To Segment 1 - Add Files (ijg_folder as string) & "rdgif.c" To Segment 1 - Add Files (ijg_folder as string) & "rdtarga.c" To Segment 1 - Add Files (ijg_folder as string) & "rdrle.c" To Segment 1 - Add Files (ijg_folder as string) & "rdbmp.c" To Segment 1 - Add Files (ijg_folder as string) & "rdswitch.c" To Segment 1 - Add Files (ijg_folder as string) & "cdjpeg.c" To Segment 1 - - Add Files (ijg_folder as string) & "libjpeg" To Segment 2 - - Add Files (cw_folder as string) & "Metrowerks CodeWarrior:Metrowerks Standard Library:MSL C:Bin:MSL C.PPC.Lib" To Segment 3 - Add Files (cw_folder as string) & "Metrowerks CodeWarrior:Metrowerks Standard Library:MSL C:Bin:MSL SIOUX.PPC.Lib" To Segment 3 - Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:Runtime:Runtime PPC:MSL RuntimePPC.Lib" To Segment 3 - - Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:MacOS Common:InterfaceLib" To Segment 4 - Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:MacOS Common:MathLib" To Segment 4 - - -- compile and link cjpeg - - Make Project - Close Project - - -- create djpeg project - - activate - Create Project (ijg_folder as string) & "djpeg.proj" - Set Preferences of panel "Target Settings" to {Target Name:"djpeg"} - Set Preferences of panel "PPC Project" to {File Name:"djpeg"} - Set Preferences of panel "Target Settings" to {Linker:"MacOS PPC Linker"} - Set Preferences of panel "C/C++ Compiler" to {ANSI Strict:true} - Set Preferences of panel "C/C++ Compiler" to {Enums Always Ints:true} - Set Preferences of panel "PPC Codegen" to {Struct Alignment:PowerPC} - Set Preferences of panel "PPC Linker" to {Generate SYM File:false} - - Add Files (ijg_folder as string) & "djpeg.c" To Segment 1 - Add Files (ijg_folder as string) & "wrppm.c" To Segment 1 - Add Files (ijg_folder as string) & "wrgif.c" To Segment 1 - Add Files (ijg_folder as string) & "wrtarga.c" To Segment 1 - Add Files (ijg_folder as string) & "wrrle.c" To Segment 1 - Add Files (ijg_folder as string) & "wrbmp.c" To Segment 1 - Add Files (ijg_folder as string) & "rdcolmap.c" To Segment 1 - Add Files (ijg_folder as string) & "cdjpeg.c" To Segment 1 - - Add Files (ijg_folder as string) & "libjpeg" To Segment 2 - - Add Files (cw_folder as string) & "Metrowerks CodeWarrior:Metrowerks Standard Library:MSL C:Bin:MSL C.PPC.Lib" To Segment 3 - Add Files (cw_folder as string) & "Metrowerks CodeWarrior:Metrowerks Standard Library:MSL C:Bin:MSL SIOUX.PPC.Lib" To Segment 3 - Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:Runtime:Runtime PPC:MSL RuntimePPC.Lib" To Segment 3 - - Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:MacOS Common:InterfaceLib" To Segment 4 - Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:MacOS Common:MathLib" To Segment 4 - - -- compile and link djpeg - - Make Project - Close Project - - -- create jpegtran project - - activate - Create Project (ijg_folder as string) & "jpegtran.proj" - Set Preferences of panel "Target Settings" to {Target Name:"jpegtran"} - Set Preferences of panel "PPC Project" to {File Name:"jpegtran"} - Set Preferences of panel "Target Settings" to {Linker:"MacOS PPC Linker"} - Set Preferences of panel "C/C++ Compiler" to {ANSI Strict:true} - Set Preferences of panel "C/C++ Compiler" to {Enums Always Ints:true} - Set Preferences of panel "PPC Codegen" to {Struct Alignment:PowerPC} - Set Preferences of panel "PPC Linker" to {Generate SYM File:false} - - Add Files (ijg_folder as string) & "jpegtran.c" To Segment 1 - Add Files (ijg_folder as string) & "rdswitch.c" To Segment 1 - Add Files (ijg_folder as string) & "cdjpeg.c" To Segment 1 - Add Files (ijg_folder as string) & "transupp.c" To Segment 1 - - Add Files (ijg_folder as string) & "libjpeg" To Segment 2 - - Add Files (cw_folder as string) & "Metrowerks CodeWarrior:Metrowerks Standard Library:MSL C:Bin:MSL C.PPC.Lib" To Segment 3 - Add Files (cw_folder as string) & "Metrowerks CodeWarrior:Metrowerks Standard Library:MSL C:Bin:MSL SIOUX.PPC.Lib" To Segment 3 - Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:Runtime:Runtime PPC:MSL RuntimePPC.Lib" To Segment 3 - - Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:MacOS Common:InterfaceLib" To Segment 4 - Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:MacOS Common:MathLib" To Segment 4 - - -- compile and link jpegtran - - Make Project - Close Project - - quit - - end timeout - end tell -end run diff --git a/jpeg/makerdep.vc6 b/jpeg/makerdep.vc6 deleted file mode 100755 index d2dac9d..0000000 --- a/jpeg/makerdep.vc6 +++ /dev/null @@ -1,6 +0,0 @@ -# Microsoft Developer Studio erstellte Abhängigkeitsdatei, einbezogen von rdjpgcom.mak - -.\rdjpgcom.c : \ - ".\jconfig.h"\ - ".\jinclude.h"\ - diff --git a/jpeg/makerdsp.vc6 b/jpeg/makerdsp.vc6 deleted file mode 100755 index 6efb442..0000000 --- a/jpeg/makerdsp.vc6 +++ /dev/null @@ -1,78 +0,0 @@ -# Microsoft Developer Studio Project File - Name="rdjpgcom" - Package Owner=<4> -# Microsoft Developer Studio Generated Build File, Format Version 6.00 -# ** NICHT BEARBEITEN ** - -# TARGTYPE "Win32 (x86) Console Application" 0x0103 - -CFG=rdjpgcom - Win32 -!MESSAGE Dies ist kein gültiges Makefile. Zum Erstellen dieses Projekts mit NMAKE -!MESSAGE verwenden Sie den Befehl "Makefile exportieren" und führen Sie den Befehl -!MESSAGE -!MESSAGE NMAKE /f "rdjpgcom.mak". -!MESSAGE -!MESSAGE Sie können beim Ausführen von NMAKE eine Konfiguration angeben -!MESSAGE durch Definieren des Makros CFG in der Befehlszeile. Zum Beispiel: -!MESSAGE -!MESSAGE NMAKE /f "rdjpgcom.mak" CFG="rdjpgcom - Win32" -!MESSAGE -!MESSAGE Für die Konfiguration stehen zur Auswahl: -!MESSAGE -!MESSAGE "rdjpgcom - Win32" (basierend auf "Win32 (x86) Console Application") -!MESSAGE - -# Begin Project -# PROP AllowPerConfigDependencies 0 -# PROP Scc_ProjName "" -# PROP Scc_LocalPath "" -CPP=cl.exe -RSC=rc.exe -# PROP BASE Use_MFC 0 -# PROP BASE Use_Debug_Libraries 0 -# PROP BASE Output_Dir ".\rdjpgcom\Release" -# PROP BASE Intermediate_Dir ".\rdjpgcom\Release" -# PROP BASE Target_Dir ".\rdjpgcom" -# PROP Use_MFC 0 -# PROP Use_Debug_Libraries 0 -# PROP Output_Dir ".\rdjpgcom\Release" -# PROP Intermediate_Dir ".\rdjpgcom\Release" -# PROP Ignore_Export_Lib 0 -# PROP Target_Dir ".\rdjpgcom" -# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /c -# ADD CPP /nologo /G6 /MT /W3 /GX /Ox /Oa /Ob2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /FD /c -# ADD BASE RSC /l 0x409 /d "NDEBUG" -# ADD RSC /l 0x409 /d "NDEBUG" -BSC32=bscmake.exe -# ADD BASE BSC32 /nologo -# ADD BSC32 /nologo -LINK32=link.exe -# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 -# ADD LINK32 Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 -# Begin Target - -# Name "rdjpgcom - Win32" -# Begin Group "Quellcodedateien" - -# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat;for;f90" -# Begin Source File - -SOURCE=.\rdjpgcom.c -# End Source File -# End Group -# Begin Group "Header-Dateien" - -# PROP Default_Filter "h;hpp;hxx;hm;inl;fi;fd" -# Begin Source File - -SOURCE=.\jconfig.h -# End Source File -# Begin Source File - -SOURCE=.\jinclude.h -# End Source File -# End Group -# Begin Group "Ressourcendateien" - -# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;cnt;rtf;gif;jpg;jpeg;jpe" -# End Group -# End Target -# End Project diff --git a/jpeg/makerfil.v10 b/jpeg/makerfil.v10 deleted file mode 100755 index 4660d49..0000000 --- a/jpeg/makerfil.v10 +++ /dev/null @@ -1,30 +0,0 @@ - - - - - {4FC737F1-C7A5-4376-A066-2A32D752A2FF} - cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx - - - {93995380-89BD-4b04-88EB-625FBE52EBFB} - h;hpp;hxx;hm;inl;inc;xsd - - - {67DA6AB6-F800-4c08-8B7A-83BB121AAD01} - rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav;mfcribbon-ms - - - - - Header Files - - - Header Files - - - - - Source Files - - - \ No newline at end of file diff --git a/jpeg/makermak.vc6 b/jpeg/makermak.vc6 deleted file mode 100755 index b54ea7d..0000000 --- a/jpeg/makermak.vc6 +++ /dev/null @@ -1,110 +0,0 @@ -# Microsoft Developer Studio Generated NMAKE File, Based on rdjpgcom.dsp -!IF "$(CFG)" == "" -CFG=rdjpgcom - Win32 -!MESSAGE Keine Konfiguration angegeben. rdjpgcom - Win32 wird als Standard verwendet. -!ENDIF - -!IF "$(CFG)" != "rdjpgcom - Win32" -!MESSAGE Ungltige Konfiguration "$(CFG)" angegeben. -!MESSAGE Sie k”nnen beim Ausfhren von NMAKE eine Konfiguration angeben -!MESSAGE durch Definieren des Makros CFG in der Befehlszeile. Zum Beispiel: -!MESSAGE -!MESSAGE NMAKE /f "rdjpgcom.mak" CFG="rdjpgcom - Win32" -!MESSAGE -!MESSAGE Fr die Konfiguration stehen zur Auswahl: -!MESSAGE -!MESSAGE "rdjpgcom - Win32" (basierend auf "Win32 (x86) Console Application") -!MESSAGE -!ERROR Eine ungltige Konfiguration wurde angegeben. -!ENDIF - -!IF "$(OS)" == "Windows_NT" -NULL= -!ELSE -NULL=nul -!ENDIF - -CPP=cl.exe -RSC=rc.exe -OUTDIR=.\rdjpgcom\Release -INTDIR=.\rdjpgcom\Release -# Begin Custom Macros -OutDir=.\rdjpgcom\Release -# End Custom Macros - -ALL : "$(OUTDIR)\rdjpgcom.exe" - - -CLEAN : - -@erase "$(INTDIR)\rdjpgcom.obj" - -@erase "$(INTDIR)\vc60.idb" - -@erase "$(OUTDIR)\rdjpgcom.exe" - -"$(OUTDIR)" : - if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)" - -BSC32=bscmake.exe -BSC32_FLAGS=/nologo /o"$(OUTDIR)\rdjpgcom.bsc" -BSC32_SBRS= \ - -LINK32=link.exe -LINK32_FLAGS=Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /incremental:no /pdb:"$(OUTDIR)\rdjpgcom.pdb" /machine:I386 /out:"$(OUTDIR)\rdjpgcom.exe" -LINK32_OBJS= \ - "$(INTDIR)\rdjpgcom.obj" - -"$(OUTDIR)\rdjpgcom.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS) - $(LINK32) @<< - $(LINK32_FLAGS) $(LINK32_OBJS) -<< - -CPP_PROJ=/nologo /G6 /MT /W3 /GX /Ox /Oa /Ob2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /Fp"$(INTDIR)\rdjpgcom.pch" /YX /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /c - -.c{$(INTDIR)}.obj:: - $(CPP) @<< - $(CPP_PROJ) $< -<< - -.cpp{$(INTDIR)}.obj:: - $(CPP) @<< - $(CPP_PROJ) $< -<< - -.cxx{$(INTDIR)}.obj:: - $(CPP) @<< - $(CPP_PROJ) $< -<< - -.c{$(INTDIR)}.sbr:: - $(CPP) @<< - $(CPP_PROJ) $< -<< - -.cpp{$(INTDIR)}.sbr:: - $(CPP) @<< - $(CPP_PROJ) $< -<< - -.cxx{$(INTDIR)}.sbr:: - $(CPP) @<< - $(CPP_PROJ) $< -<< - - -!IF "$(NO_EXTERNAL_DEPS)" != "1" -!IF EXISTS("rdjpgcom.dep") -!INCLUDE "rdjpgcom.dep" -!ELSE -!MESSAGE Warning: cannot find "rdjpgcom.dep" -!ENDIF -!ENDIF - - -!IF "$(CFG)" == "rdjpgcom - Win32" -SOURCE=.\rdjpgcom.c - -"$(INTDIR)\rdjpgcom.obj" : $(SOURCE) "$(INTDIR)" - - - -!ENDIF - diff --git a/jpeg/makervcx.v10 b/jpeg/makervcx.v10 deleted file mode 100755 index f34017f..0000000 --- a/jpeg/makervcx.v10 +++ /dev/null @@ -1,62 +0,0 @@ - - - - - Release - Win32 - - - - {C81513DB-78DC-46BC-BC98-82E745203976} - Win32Proj - rdjpgcom - - - - Application - false - true - Unicode - - - - - - - - - - false - $(ProjectName)\$(Configuration)\ - $(ProjectName)\$(Configuration)\ - - - - Level3 - NotUsing - Full - true - false - WIN32;NDEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS - true - true - 4996 - - - Console - true - true - true - - - - - - - - - - - - - \ No newline at end of file diff --git a/jpeg/maketdep.vc6 b/jpeg/maketdep.vc6 deleted file mode 100755 index acebae9..0000000 --- a/jpeg/maketdep.vc6 +++ /dev/null @@ -1,43 +0,0 @@ -# Microsoft Developer Studio erstellte Abhängigkeitsdatei, einbezogen von jpegtran.mak - -.\cdjpeg.c : \ - ".\cderror.h"\ - ".\cdjpeg.h"\ - ".\jconfig.h"\ - ".\jerror.h"\ - ".\jinclude.h"\ - ".\jmorecfg.h"\ - ".\jpeglib.h"\ - - -.\jpegtran.c : \ - ".\cderror.h"\ - ".\cdjpeg.h"\ - ".\jconfig.h"\ - ".\jerror.h"\ - ".\jinclude.h"\ - ".\jmorecfg.h"\ - ".\jpeglib.h"\ - ".\jversion.h"\ - ".\transupp.h"\ - - -.\rdswitch.c : \ - ".\cderror.h"\ - ".\cdjpeg.h"\ - ".\jconfig.h"\ - ".\jerror.h"\ - ".\jinclude.h"\ - ".\jmorecfg.h"\ - ".\jpeglib.h"\ - - -.\transupp.c : \ - ".\jconfig.h"\ - ".\jerror.h"\ - ".\jinclude.h"\ - ".\jmorecfg.h"\ - ".\jpegint.h"\ - ".\jpeglib.h"\ - ".\transupp.h"\ - diff --git a/jpeg/maketdsp.vc6 b/jpeg/maketdsp.vc6 deleted file mode 100755 index 42e7312..0000000 --- a/jpeg/maketdsp.vc6 +++ /dev/null @@ -1,122 +0,0 @@ -# Microsoft Developer Studio Project File - Name="jpegtran" - Package Owner=<4> -# Microsoft Developer Studio Generated Build File, Format Version 6.00 -# ** NICHT BEARBEITEN ** - -# TARGTYPE "Win32 (x86) Console Application" 0x0103 - -CFG=jpegtran - Win32 -!MESSAGE Dies ist kein gültiges Makefile. Zum Erstellen dieses Projekts mit NMAKE -!MESSAGE verwenden Sie den Befehl "Makefile exportieren" und führen Sie den Befehl -!MESSAGE -!MESSAGE NMAKE /f "jpegtran.mak". -!MESSAGE -!MESSAGE Sie können beim Ausführen von NMAKE eine Konfiguration angeben -!MESSAGE durch Definieren des Makros CFG in der Befehlszeile. Zum Beispiel: -!MESSAGE -!MESSAGE NMAKE /f "jpegtran.mak" CFG="jpegtran - Win32" -!MESSAGE -!MESSAGE Für die Konfiguration stehen zur Auswahl: -!MESSAGE -!MESSAGE "jpegtran - Win32" (basierend auf "Win32 (x86) Console Application") -!MESSAGE - -# Begin Project -# PROP AllowPerConfigDependencies 0 -# PROP Scc_ProjName "" -# PROP Scc_LocalPath "" -CPP=cl.exe -RSC=rc.exe -# PROP BASE Use_MFC 0 -# PROP BASE Use_Debug_Libraries 0 -# PROP BASE Output_Dir ".\jpegtran\Release" -# PROP BASE Intermediate_Dir ".\jpegtran\Release" -# PROP BASE Target_Dir ".\jpegtran" -# PROP Use_MFC 0 -# PROP Use_Debug_Libraries 0 -# PROP Output_Dir ".\jpegtran\Release" -# PROP Intermediate_Dir ".\jpegtran\Release" -# PROP Ignore_Export_Lib 0 -# PROP Target_Dir ".\jpegtran" -# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /c -# ADD CPP /nologo /G6 /MT /W3 /GX /Ox /Oa /Ob2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /FD /c -# ADD BASE RSC /l 0x409 /d "NDEBUG" -# ADD RSC /l 0x409 /d "NDEBUG" -BSC32=bscmake.exe -# ADD BASE BSC32 /nologo -# ADD BSC32 /nologo -LINK32=link.exe -# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 -# ADD LINK32 Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 -# Begin Target - -# Name "jpegtran - Win32" -# Begin Group "Quellcodedateien" - -# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat;for;f90" -# Begin Source File - -SOURCE=.\cdjpeg.c -# End Source File -# Begin Source File - -SOURCE=.\jpegtran.c -# End Source File -# Begin Source File - -SOURCE=.\rdswitch.c -# End Source File -# Begin Source File - -SOURCE=.\transupp.c -# End Source File -# End Group -# Begin Group "Header-Dateien" - -# PROP Default_Filter "h;hpp;hxx;hm;inl;fi;fd" -# Begin Source File - -SOURCE=.\cderror.h -# End Source File -# Begin Source File - -SOURCE=.\cdjpeg.h -# End Source File -# Begin Source File - -SOURCE=.\jconfig.h -# End Source File -# Begin Source File - -SOURCE=.\jerror.h -# End Source File -# Begin Source File - -SOURCE=.\jinclude.h -# End Source File -# Begin Source File - -SOURCE=.\jmorecfg.h -# End Source File -# Begin Source File - -SOURCE=.\jpegint.h -# End Source File -# Begin Source File - -SOURCE=.\jpeglib.h -# End Source File -# Begin Source File - -SOURCE=.\jversion.h -# End Source File -# Begin Source File - -SOURCE=.\transupp.h -# End Source File -# End Group -# Begin Group "Ressourcendateien" - -# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;cnt;rtf;gif;jpg;jpeg;jpe" -# End Group -# End Target -# End Project diff --git a/jpeg/maketfil.v10 b/jpeg/maketfil.v10 deleted file mode 100755 index e772792..0000000 --- a/jpeg/maketfil.v10 +++ /dev/null @@ -1,63 +0,0 @@ - - - - - {4FC737F1-C7A5-4376-A066-2A32D752A2FF} - cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx - - - {93995380-89BD-4b04-88EB-625FBE52EBFB} - h;hpp;hxx;hm;inl;inc;xsd - - - {67DA6AB6-F800-4c08-8B7A-83BB121AAD01} - rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav;mfcribbon-ms - - - - - Header Files - - - Header Files - - - Header Files - - - Header Files - - - Header Files - - - Header Files - - - Header Files - - - Header Files - - - Header Files - - - Header Files - - - - - Source Files - - - Source Files - - - Source Files - - - Source Files - - - \ No newline at end of file diff --git a/jpeg/maketmak.vc6 b/jpeg/maketmak.vc6 deleted file mode 100755 index 4ef27fd..0000000 --- a/jpeg/maketmak.vc6 +++ /dev/null @@ -1,131 +0,0 @@ -# Microsoft Developer Studio Generated NMAKE File, Based on jpegtran.dsp -!IF "$(CFG)" == "" -CFG=jpegtran - Win32 -!MESSAGE Keine Konfiguration angegeben. jpegtran - Win32 wird als Standard verwendet. -!ENDIF - -!IF "$(CFG)" != "jpegtran - Win32" -!MESSAGE Ungltige Konfiguration "$(CFG)" angegeben. -!MESSAGE Sie k”nnen beim Ausfhren von NMAKE eine Konfiguration angeben -!MESSAGE durch Definieren des Makros CFG in der Befehlszeile. Zum Beispiel: -!MESSAGE -!MESSAGE NMAKE /f "jpegtran.mak" CFG="jpegtran - Win32" -!MESSAGE -!MESSAGE Fr die Konfiguration stehen zur Auswahl: -!MESSAGE -!MESSAGE "jpegtran - Win32" (basierend auf "Win32 (x86) Console Application") -!MESSAGE -!ERROR Eine ungltige Konfiguration wurde angegeben. -!ENDIF - -!IF "$(OS)" == "Windows_NT" -NULL= -!ELSE -NULL=nul -!ENDIF - -CPP=cl.exe -RSC=rc.exe -OUTDIR=.\jpegtran\Release -INTDIR=.\jpegtran\Release -# Begin Custom Macros -OutDir=.\jpegtran\Release -# End Custom Macros - -ALL : "$(OUTDIR)\jpegtran.exe" - - -CLEAN : - -@erase "$(INTDIR)\cdjpeg.obj" - -@erase "$(INTDIR)\jpegtran.obj" - -@erase "$(INTDIR)\rdswitch.obj" - -@erase "$(INTDIR)\transupp.obj" - -@erase "$(INTDIR)\vc60.idb" - -@erase "$(OUTDIR)\jpegtran.exe" - -"$(OUTDIR)" : - if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)" - -BSC32=bscmake.exe -BSC32_FLAGS=/nologo /o"$(OUTDIR)\jpegtran.bsc" -BSC32_SBRS= \ - -LINK32=link.exe -LINK32_FLAGS=Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /incremental:no /pdb:"$(OUTDIR)\jpegtran.pdb" /machine:I386 /out:"$(OUTDIR)\jpegtran.exe" -LINK32_OBJS= \ - "$(INTDIR)\cdjpeg.obj" \ - "$(INTDIR)\jpegtran.obj" \ - "$(INTDIR)\rdswitch.obj" \ - "$(INTDIR)\transupp.obj" - -"$(OUTDIR)\jpegtran.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS) - $(LINK32) @<< - $(LINK32_FLAGS) $(LINK32_OBJS) -<< - -CPP_PROJ=/nologo /G6 /MT /W3 /GX /Ox /Oa /Ob2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /Fp"$(INTDIR)\jpegtran.pch" /YX /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /c - -.c{$(INTDIR)}.obj:: - $(CPP) @<< - $(CPP_PROJ) $< -<< - -.cpp{$(INTDIR)}.obj:: - $(CPP) @<< - $(CPP_PROJ) $< -<< - -.cxx{$(INTDIR)}.obj:: - $(CPP) @<< - $(CPP_PROJ) $< -<< - -.c{$(INTDIR)}.sbr:: - $(CPP) @<< - $(CPP_PROJ) $< -<< - -.cpp{$(INTDIR)}.sbr:: - $(CPP) @<< - $(CPP_PROJ) $< -<< - -.cxx{$(INTDIR)}.sbr:: - $(CPP) @<< - $(CPP_PROJ) $< -<< - - -!IF "$(NO_EXTERNAL_DEPS)" != "1" -!IF EXISTS("jpegtran.dep") -!INCLUDE "jpegtran.dep" -!ELSE -!MESSAGE Warning: cannot find "jpegtran.dep" -!ENDIF -!ENDIF - - -!IF "$(CFG)" == "jpegtran - Win32" -SOURCE=.\cdjpeg.c - -"$(INTDIR)\cdjpeg.obj" : $(SOURCE) "$(INTDIR)" - - -SOURCE=.\jpegtran.c - -"$(INTDIR)\jpegtran.obj" : $(SOURCE) "$(INTDIR)" - - -SOURCE=.\rdswitch.c - -"$(INTDIR)\rdswitch.obj" : $(SOURCE) "$(INTDIR)" - - -SOURCE=.\transupp.c - -"$(INTDIR)\transupp.obj" : $(SOURCE) "$(INTDIR)" - - - -!ENDIF - diff --git a/jpeg/maketvcx.v10 b/jpeg/maketvcx.v10 deleted file mode 100755 index b8e7203..0000000 --- a/jpeg/maketvcx.v10 +++ /dev/null @@ -1,74 +0,0 @@ - - - - - Release - Win32 - - - - {025BAC50-51B5-4FFE-BC47-3F920BB4047E} - Win32Proj - jpegtran - - - - Application - false - true - Unicode - - - - - - - - - - false - $(ProjectName)\$(Configuration)\ - $(ProjectName)\$(Configuration)\ - - - - Level3 - NotUsing - Full - true - false - WIN32;NDEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS - true - true - 4996 - - - Console - true - true - true - Release\jpeg.lib;kernel32.lib;user32.lib;gdi32.lib;winspool.lib;comdlg32.lib;advapi32.lib;shell32.lib;ole32.lib;oleaut32.lib;uuid.lib;odbc32.lib;odbccp32.lib;%(AdditionalDependencies) - - - - - - - - - - - - - - - - - - - - - - - - \ No newline at end of file diff --git a/jpeg/makewdep.vc6 b/jpeg/makewdep.vc6 deleted file mode 100755 index 358146f..0000000 --- a/jpeg/makewdep.vc6 +++ /dev/null @@ -1,6 +0,0 @@ -# Microsoft Developer Studio erstellte Abhängigkeitsdatei, einbezogen von wrjpgcom.mak - -.\wrjpgcom.c : \ - ".\jconfig.h"\ - ".\jinclude.h"\ - diff --git a/jpeg/makewdsp.vc6 b/jpeg/makewdsp.vc6 deleted file mode 100755 index b572e8a..0000000 --- a/jpeg/makewdsp.vc6 +++ /dev/null @@ -1,78 +0,0 @@ -# Microsoft Developer Studio Project File - Name="wrjpgcom" - Package Owner=<4> -# Microsoft Developer Studio Generated Build File, Format Version 6.00 -# ** NICHT BEARBEITEN ** - -# TARGTYPE "Win32 (x86) Console Application" 0x0103 - -CFG=wrjpgcom - Win32 -!MESSAGE Dies ist kein gültiges Makefile. Zum Erstellen dieses Projekts mit NMAKE -!MESSAGE verwenden Sie den Befehl "Makefile exportieren" und führen Sie den Befehl -!MESSAGE -!MESSAGE NMAKE /f "wrjpgcom.mak". -!MESSAGE -!MESSAGE Sie können beim Ausführen von NMAKE eine Konfiguration angeben -!MESSAGE durch Definieren des Makros CFG in der Befehlszeile. Zum Beispiel: -!MESSAGE -!MESSAGE NMAKE /f "wrjpgcom.mak" CFG="wrjpgcom - Win32" -!MESSAGE -!MESSAGE Für die Konfiguration stehen zur Auswahl: -!MESSAGE -!MESSAGE "wrjpgcom - Win32" (basierend auf "Win32 (x86) Console Application") -!MESSAGE - -# Begin Project -# PROP AllowPerConfigDependencies 0 -# PROP Scc_ProjName "" -# PROP Scc_LocalPath "" -CPP=cl.exe -RSC=rc.exe -# PROP BASE Use_MFC 0 -# PROP BASE Use_Debug_Libraries 0 -# PROP BASE Output_Dir ".\wrjpgcom\Release" -# PROP BASE Intermediate_Dir ".\wrjpgcom\Release" -# PROP BASE Target_Dir ".\wrjpgcom" -# PROP Use_MFC 0 -# PROP Use_Debug_Libraries 0 -# PROP Output_Dir ".\wrjpgcom\Release" -# PROP Intermediate_Dir ".\wrjpgcom\Release" -# PROP Ignore_Export_Lib 0 -# PROP Target_Dir ".\wrjpgcom" -# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /c -# ADD CPP /nologo /G6 /MT /W3 /GX /Ox /Oa /Ob2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /FD /c -# ADD BASE RSC /l 0x409 /d "NDEBUG" -# ADD RSC /l 0x409 /d "NDEBUG" -BSC32=bscmake.exe -# ADD BASE BSC32 /nologo -# ADD BSC32 /nologo -LINK32=link.exe -# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 -# ADD LINK32 Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 -# Begin Target - -# Name "wrjpgcom - Win32" -# Begin Group "Quellcodedateien" - -# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat;for;f90" -# Begin Source File - -SOURCE=.\wrjpgcom.c -# End Source File -# End Group -# Begin Group "Header-Dateien" - -# PROP Default_Filter "h;hpp;hxx;hm;inl;fi;fd" -# Begin Source File - -SOURCE=.\jconfig.h -# End Source File -# Begin Source File - -SOURCE=.\jinclude.h -# End Source File -# End Group -# Begin Group "Ressourcendateien" - -# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;cnt;rtf;gif;jpg;jpeg;jpe" -# End Group -# End Target -# End Project diff --git a/jpeg/makewfil.v10 b/jpeg/makewfil.v10 deleted file mode 100755 index 370fa14..0000000 --- a/jpeg/makewfil.v10 +++ /dev/null @@ -1,30 +0,0 @@ - - - - - {4FC737F1-C7A5-4376-A066-2A32D752A2FF} - cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx - - - {93995380-89BD-4b04-88EB-625FBE52EBFB} - h;hpp;hxx;hm;inl;inc;xsd - - - {67DA6AB6-F800-4c08-8B7A-83BB121AAD01} - rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav;mfcribbon-ms - - - - - Header Files - - - Header Files - - - - - Source Files - - - \ No newline at end of file diff --git a/jpeg/makewmak.vc6 b/jpeg/makewmak.vc6 deleted file mode 100755 index 27c73f3..0000000 --- a/jpeg/makewmak.vc6 +++ /dev/null @@ -1,110 +0,0 @@ -# Microsoft Developer Studio Generated NMAKE File, Based on wrjpgcom.dsp -!IF "$(CFG)" == "" -CFG=wrjpgcom - Win32 -!MESSAGE Keine Konfiguration angegeben. wrjpgcom - Win32 wird als Standard verwendet. -!ENDIF - -!IF "$(CFG)" != "wrjpgcom - Win32" -!MESSAGE Ungltige Konfiguration "$(CFG)" angegeben. -!MESSAGE Sie k”nnen beim Ausfhren von NMAKE eine Konfiguration angeben -!MESSAGE durch Definieren des Makros CFG in der Befehlszeile. Zum Beispiel: -!MESSAGE -!MESSAGE NMAKE /f "wrjpgcom.mak" CFG="wrjpgcom - Win32" -!MESSAGE -!MESSAGE Fr die Konfiguration stehen zur Auswahl: -!MESSAGE -!MESSAGE "wrjpgcom - Win32" (basierend auf "Win32 (x86) Console Application") -!MESSAGE -!ERROR Eine ungltige Konfiguration wurde angegeben. -!ENDIF - -!IF "$(OS)" == "Windows_NT" -NULL= -!ELSE -NULL=nul -!ENDIF - -CPP=cl.exe -RSC=rc.exe -OUTDIR=.\wrjpgcom\Release -INTDIR=.\wrjpgcom\Release -# Begin Custom Macros -OutDir=.\wrjpgcom\Release -# End Custom Macros - -ALL : "$(OUTDIR)\wrjpgcom.exe" - - -CLEAN : - -@erase "$(INTDIR)\vc60.idb" - -@erase "$(INTDIR)\wrjpgcom.obj" - -@erase "$(OUTDIR)\wrjpgcom.exe" - -"$(OUTDIR)" : - if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)" - -BSC32=bscmake.exe -BSC32_FLAGS=/nologo /o"$(OUTDIR)\wrjpgcom.bsc" -BSC32_SBRS= \ - -LINK32=link.exe -LINK32_FLAGS=Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /incremental:no /pdb:"$(OUTDIR)\wrjpgcom.pdb" /machine:I386 /out:"$(OUTDIR)\wrjpgcom.exe" -LINK32_OBJS= \ - "$(INTDIR)\wrjpgcom.obj" - -"$(OUTDIR)\wrjpgcom.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS) - $(LINK32) @<< - $(LINK32_FLAGS) $(LINK32_OBJS) -<< - -CPP_PROJ=/nologo /G6 /MT /W3 /GX /Ox /Oa /Ob2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /Fp"$(INTDIR)\wrjpgcom.pch" /YX /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /c - -.c{$(INTDIR)}.obj:: - $(CPP) @<< - $(CPP_PROJ) $< -<< - -.cpp{$(INTDIR)}.obj:: - $(CPP) @<< - $(CPP_PROJ) $< -<< - -.cxx{$(INTDIR)}.obj:: - $(CPP) @<< - $(CPP_PROJ) $< -<< - -.c{$(INTDIR)}.sbr:: - $(CPP) @<< - $(CPP_PROJ) $< -<< - -.cpp{$(INTDIR)}.sbr:: - $(CPP) @<< - $(CPP_PROJ) $< -<< - -.cxx{$(INTDIR)}.sbr:: - $(CPP) @<< - $(CPP_PROJ) $< -<< - - -!IF "$(NO_EXTERNAL_DEPS)" != "1" -!IF EXISTS("wrjpgcom.dep") -!INCLUDE "wrjpgcom.dep" -!ELSE -!MESSAGE Warning: cannot find "wrjpgcom.dep" -!ENDIF -!ENDIF - - -!IF "$(CFG)" == "wrjpgcom - Win32" -SOURCE=.\wrjpgcom.c - -"$(INTDIR)\wrjpgcom.obj" : $(SOURCE) "$(INTDIR)" - - - -!ENDIF - diff --git a/jpeg/makewvcx.v10 b/jpeg/makewvcx.v10 deleted file mode 100755 index b7ce0b4..0000000 --- a/jpeg/makewvcx.v10 +++ /dev/null @@ -1,62 +0,0 @@ - - - - - Release - Win32 - - - - {B57065D4-DDDA-4668-BAF5-2D49270C973C} - Win32Proj - wrjpgcom - - - - Application - false - true - Unicode - - - - - - - - - - false - $(ProjectName)\$(Configuration)\ - $(ProjectName)\$(Configuration)\ - - - - Level3 - NotUsing - Full - true - false - WIN32;NDEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS - true - true - 4996 - - - Console - true - true - true - - - - - - - - - - - - - \ No newline at end of file diff --git a/jpeg/makljpeg.st b/jpeg/makljpeg.st deleted file mode 100755 index cc1ba01..0000000 --- a/jpeg/makljpeg.st +++ /dev/null @@ -1,68 +0,0 @@ -; Project file for Independent JPEG Group's software -; -; This project file is for Atari ST/STE/TT systems using Pure C or Turbo C. -; Thanks to Frank Moehle, B. Setzepfandt, and Guido Vollbeding. -; -; To use this file, rename it to libjpeg.prj. -; Read installation instructions before trying to make the program! -; -; -; * * * Output file * * * -libjpeg.lib -; -; * * * COMPILER OPTIONS * * * -.C[-P] ; absolute calls -.C[-M] ; and no string merging, folks -.C[-w-cln] ; no "constant is long" warnings -.C[-w-par] ; no "parameter xxxx unused" -.C[-w-rch] ; no "unreachable code" -.C[-wsig] ; warn if significant digits may be lost -.L[-J] ; link new Obj-format (so we get a library) -= -; * * * * List of modules * * * * -jaricom.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) -jcapimin.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) -jcapistd.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) -jcarith.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) -jccoefct.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) -jccolor.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) -jcdctmgr.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h) -jchuff.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) -jcinit.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) -jcmainct.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) -jcmarker.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) -jcmaster.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) -jcomapi.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) -jcparam.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) -jcprepct.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) -jcsample.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) -jctrans.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) -jdapimin.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) -jdapistd.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) -jdarith.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) -jdatadst.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h) -jdatasrc.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h) -jdcoefct.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) -jdcolor.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) -jddctmgr.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h) -jdhuff.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) -jdinput.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) -jdmainct.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) -jdmarker.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) -jdmaster.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) -jdmerge.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) -jdpostct.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) -jdsample.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) -jdtrans.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) -jerror.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jversion.h,jerror.h) -jfdctflt.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h) -jfdctfst.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h) -jfdctint.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h) -jidctflt.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h) -jidctfst.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h) -jidctint.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h) -jquant1.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) -jquant2.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) -jutils.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) -jmemmgr.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jmemsys.h) -jmemansi.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jmemsys.h) diff --git a/jpeg/maktjpeg.st b/jpeg/maktjpeg.st deleted file mode 100755 index 43f078a..0000000 --- a/jpeg/maktjpeg.st +++ /dev/null @@ -1,30 +0,0 @@ -; Project file for Independent JPEG Group's software -; -; This project file is for Atari ST/STE/TT systems using Pure C or Turbo C. -; Thanks to Frank Moehle, B. Setzepfandt, and Guido Vollbeding. -; -; To use this file, rename it to jpegtran.prj. -; If you are using Turbo C, change filenames beginning with "pc..." to "tc..." -; Read installation instructions before trying to make the program! -; -; -; * * * Output file * * * -jpegtran.ttp -; -; * * * COMPILER OPTIONS * * * -.C[-P] ; absolute calls -.C[-M] ; and no string merging, folks -.C[-w-cln] ; no "constant is long" warnings -.C[-w-par] ; no "parameter xxxx unused" -.C[-w-rch] ; no "unreachable code" -.C[-wsig] ; warn if significant digits may be lost -= -; * * * * List of modules * * * * -pcstart.o -jpegtran.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h,transupp.h,jversion.h) -cdjpeg.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) -rdswitch.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) -transupp.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,transupp.h) -libjpeg.lib ; built by libjpeg.prj -pcstdlib.lib ; standard library -pcextlib.lib ; extended library diff --git a/jpeg/makvms.opt b/jpeg/makvms.opt deleted file mode 100755 index 675e8fe..0000000 --- a/jpeg/makvms.opt +++ /dev/null @@ -1,4 +0,0 @@ -! A pointer to the VAX/VMS C Run-Time Shareable Library. -! This file is needed by makefile.mms and makefile.vms, -! but only for the older VAX C compiler. DEC C does not need it. -Sys$Library:VAXCRTL.EXE /Share diff --git a/jpeg/missing b/jpeg/missing deleted file mode 100755 index 28055d2..0000000 --- a/jpeg/missing +++ /dev/null @@ -1,376 +0,0 @@ -#! /bin/sh -# Common stub for a few missing GNU programs while installing. - -scriptversion=2009-04-28.21; # UTC - -# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006, -# 2008, 2009 Free Software Foundation, Inc. -# Originally by Fran,cois Pinard , 1996. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . - -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -if test $# -eq 0; then - echo 1>&2 "Try \`$0 --help' for more information" - exit 1 -fi - -run=: -sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p' -sed_minuso='s/.* -o \([^ ]*\).*/\1/p' - -# In the cases where this matters, `missing' is being run in the -# srcdir already. -if test -f configure.ac; then - configure_ac=configure.ac -else - configure_ac=configure.in -fi - -msg="missing on your system" - -case $1 in ---run) - # Try to run requested program, and just exit if it succeeds. - run= - shift - "$@" && exit 0 - # Exit code 63 means version mismatch. This often happens - # when the user try to use an ancient version of a tool on - # a file that requires a minimum version. In this case we - # we should proceed has if the program had been absent, or - # if --run hadn't been passed. - if test $? = 63; then - run=: - msg="probably too old" - fi - ;; - - -h|--h|--he|--hel|--help) - echo "\ -$0 [OPTION]... PROGRAM [ARGUMENT]... - -Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an -error status if there is no known handling for PROGRAM. - -Options: - -h, --help display this help and exit - -v, --version output version information and exit - --run try to run the given command, and emulate it if it fails - -Supported PROGRAM values: - aclocal touch file \`aclocal.m4' - autoconf touch file \`configure' - autoheader touch file \`config.h.in' - autom4te touch the output file, or create a stub one - automake touch all \`Makefile.in' files - bison create \`y.tab.[ch]', if possible, from existing .[ch] - flex create \`lex.yy.c', if possible, from existing .c - help2man touch the output file - lex create \`lex.yy.c', if possible, from existing .c - makeinfo touch the output file - tar try tar, gnutar, gtar, then tar without non-portable flags - yacc create \`y.tab.[ch]', if possible, from existing .[ch] - -Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and -\`g' are ignored when checking the name. - -Send bug reports to ." - exit $? - ;; - - -v|--v|--ve|--ver|--vers|--versi|--versio|--version) - echo "missing $scriptversion (GNU Automake)" - exit $? - ;; - - -*) - echo 1>&2 "$0: Unknown \`$1' option" - echo 1>&2 "Try \`$0 --help' for more information" - exit 1 - ;; - -esac - -# normalize program name to check for. -program=`echo "$1" | sed ' - s/^gnu-//; t - s/^gnu//; t - s/^g//; t'` - -# Now exit if we have it, but it failed. Also exit now if we -# don't have it and --version was passed (most likely to detect -# the program). This is about non-GNU programs, so use $1 not -# $program. -case $1 in - lex*|yacc*) - # Not GNU programs, they don't have --version. - ;; - - tar*) - if test -n "$run"; then - echo 1>&2 "ERROR: \`tar' requires --run" - exit 1 - elif test "x$2" = "x--version" || test "x$2" = "x--help"; then - exit 1 - fi - ;; - - *) - if test -z "$run" && ($1 --version) > /dev/null 2>&1; then - # We have it, but it failed. - exit 1 - elif test "x$2" = "x--version" || test "x$2" = "x--help"; then - # Could not run --version or --help. This is probably someone - # running `$TOOL --version' or `$TOOL --help' to check whether - # $TOOL exists and not knowing $TOOL uses missing. - exit 1 - fi - ;; -esac - -# If it does not exist, or fails to run (possibly an outdated version), -# try to emulate it. -case $program in - aclocal*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`acinclude.m4' or \`${configure_ac}'. You might want - to install the \`Automake' and \`Perl' packages. Grab them from - any GNU archive site." - touch aclocal.m4 - ;; - - autoconf*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`${configure_ac}'. You might want to install the - \`Autoconf' and \`GNU m4' packages. Grab them from any GNU - archive site." - touch configure - ;; - - autoheader*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`acconfig.h' or \`${configure_ac}'. You might want - to install the \`Autoconf' and \`GNU m4' packages. Grab them - from any GNU archive site." - files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}` - test -z "$files" && files="config.h" - touch_files= - for f in $files; do - case $f in - *:*) touch_files="$touch_files "`echo "$f" | - sed -e 's/^[^:]*://' -e 's/:.*//'`;; - *) touch_files="$touch_files $f.in";; - esac - done - touch $touch_files - ;; - - automake*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. - You might want to install the \`Automake' and \`Perl' packages. - Grab them from any GNU archive site." - find . -type f -name Makefile.am -print | - sed 's/\.am$/.in/' | - while read f; do touch "$f"; done - ;; - - autom4te*) - echo 1>&2 "\ -WARNING: \`$1' is needed, but is $msg. - You might have modified some files without having the - proper tools for further handling them. - You can get \`$1' as part of \`Autoconf' from any GNU - archive site." - - file=`echo "$*" | sed -n "$sed_output"` - test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` - if test -f "$file"; then - touch $file - else - test -z "$file" || exec >$file - echo "#! /bin/sh" - echo "# Created by GNU Automake missing as a replacement of" - echo "# $ $@" - echo "exit 0" - chmod +x $file - exit 1 - fi - ;; - - bison*|yacc*) - echo 1>&2 "\ -WARNING: \`$1' $msg. You should only need it if - you modified a \`.y' file. You may need the \`Bison' package - in order for those modifications to take effect. You can get - \`Bison' from any GNU archive site." - rm -f y.tab.c y.tab.h - if test $# -ne 1; then - eval LASTARG="\${$#}" - case $LASTARG in - *.y) - SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` - if test -f "$SRCFILE"; then - cp "$SRCFILE" y.tab.c - fi - SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` - if test -f "$SRCFILE"; then - cp "$SRCFILE" y.tab.h - fi - ;; - esac - fi - if test ! -f y.tab.h; then - echo >y.tab.h - fi - if test ! -f y.tab.c; then - echo 'main() { return 0; }' >y.tab.c - fi - ;; - - lex*|flex*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified a \`.l' file. You may need the \`Flex' package - in order for those modifications to take effect. You can get - \`Flex' from any GNU archive site." - rm -f lex.yy.c - if test $# -ne 1; then - eval LASTARG="\${$#}" - case $LASTARG in - *.l) - SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` - if test -f "$SRCFILE"; then - cp "$SRCFILE" lex.yy.c - fi - ;; - esac - fi - if test ! -f lex.yy.c; then - echo 'main() { return 0; }' >lex.yy.c - fi - ;; - - help2man*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified a dependency of a manual page. You may need the - \`Help2man' package in order for those modifications to take - effect. You can get \`Help2man' from any GNU archive site." - - file=`echo "$*" | sed -n "$sed_output"` - test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` - if test -f "$file"; then - touch $file - else - test -z "$file" || exec >$file - echo ".ab help2man is required to generate this page" - exit $? - fi - ;; - - makeinfo*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified a \`.texi' or \`.texinfo' file, or any other file - indirectly affecting the aspect of the manual. The spurious - call might also be the consequence of using a buggy \`make' (AIX, - DU, IRIX). You might want to install the \`Texinfo' package or - the \`GNU make' package. Grab either from any GNU archive site." - # The file to touch is that specified with -o ... - file=`echo "$*" | sed -n "$sed_output"` - test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` - if test -z "$file"; then - # ... or it is the one specified with @setfilename ... - infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` - file=`sed -n ' - /^@setfilename/{ - s/.* \([^ ]*\) *$/\1/ - p - q - }' $infile` - # ... or it is derived from the source name (dir/f.texi becomes f.info) - test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info - fi - # If the file does not exist, the user really needs makeinfo; - # let's fail without touching anything. - test -f $file || exit 1 - touch $file - ;; - - tar*) - shift - - # We have already tried tar in the generic part. - # Look for gnutar/gtar before invocation to avoid ugly error - # messages. - if (gnutar --version > /dev/null 2>&1); then - gnutar "$@" && exit 0 - fi - if (gtar --version > /dev/null 2>&1); then - gtar "$@" && exit 0 - fi - firstarg="$1" - if shift; then - case $firstarg in - *o*) - firstarg=`echo "$firstarg" | sed s/o//` - tar "$firstarg" "$@" && exit 0 - ;; - esac - case $firstarg in - *h*) - firstarg=`echo "$firstarg" | sed s/h//` - tar "$firstarg" "$@" && exit 0 - ;; - esac - fi - - echo 1>&2 "\ -WARNING: I can't seem to be able to run \`tar' with the given arguments. - You may want to install GNU tar or Free paxutils, or check the - command line arguments." - exit 1 - ;; - - *) - echo 1>&2 "\ -WARNING: \`$1' is needed, and is $msg. - You might have modified some files without having the - proper tools for further handling them. Check the \`README' file, - it often tells you about the needed prerequisites for installing - this package. You may also peek at any GNU archive site, in case - some other package would contain this missing \`$1' program." - exit 1 - ;; -esac - -exit 0 - -# Local variables: -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "scriptversion=" -# time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-time-zone: "UTC" -# time-stamp-end: "; # UTC" -# End: diff --git a/jpeg/rdbmp.c b/jpeg/rdbmp.c deleted file mode 100755 index fd773d4..0000000 --- a/jpeg/rdbmp.c +++ /dev/null @@ -1,480 +0,0 @@ -/* - * rdbmp.c - * - * Copyright (C) 1994-1996, Thomas G. Lane. - * Modified 2009-2010 by Guido Vollbeding. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains routines to read input images in Microsoft "BMP" - * format (MS Windows 3.x, OS/2 1.x, and OS/2 2.x flavors). - * Currently, only 8-bit and 24-bit images are supported, not 1-bit or - * 4-bit (feeding such low-depth images into JPEG would be silly anyway). - * Also, we don't support RLE-compressed files. - * - * These routines may need modification for non-Unix environments or - * specialized applications. As they stand, they assume input from - * an ordinary stdio stream. They further assume that reading begins - * at the start of the file; start_input may need work if the - * user interface has already read some data (e.g., to determine that - * the file is indeed BMP format). - * - * This code contributed by James Arthur Boucher. - */ - -#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ - -#ifdef BMP_SUPPORTED - - -/* Macros to deal with unsigned chars as efficiently as compiler allows */ - -#ifdef HAVE_UNSIGNED_CHAR -typedef unsigned char U_CHAR; -#define UCH(x) ((int) (x)) -#else /* !HAVE_UNSIGNED_CHAR */ -#ifdef CHAR_IS_UNSIGNED -typedef char U_CHAR; -#define UCH(x) ((int) (x)) -#else -typedef char U_CHAR; -#define UCH(x) ((int) (x) & 0xFF) -#endif -#endif /* HAVE_UNSIGNED_CHAR */ - - -#define ReadOK(file,buffer,len) (JFREAD(file,buffer,len) == ((size_t) (len))) - - -/* Private version of data source object */ - -typedef struct _bmp_source_struct * bmp_source_ptr; - -typedef struct _bmp_source_struct { - struct cjpeg_source_struct pub; /* public fields */ - - j_compress_ptr cinfo; /* back link saves passing separate parm */ - - JSAMPARRAY colormap; /* BMP colormap (converted to my format) */ - - jvirt_sarray_ptr whole_image; /* Needed to reverse row order */ - JDIMENSION source_row; /* Current source row number */ - JDIMENSION row_width; /* Physical width of scanlines in file */ - - int bits_per_pixel; /* remembers 8- or 24-bit format */ -} bmp_source_struct; - - -LOCAL(int) -read_byte (bmp_source_ptr sinfo) -/* Read next byte from BMP file */ -{ - register FILE *infile = sinfo->pub.input_file; - register int c; - - if ((c = getc(infile)) == EOF) - ERREXIT(sinfo->cinfo, JERR_INPUT_EOF); - return c; -} - - -LOCAL(void) -read_colormap (bmp_source_ptr sinfo, int cmaplen, int mapentrysize) -/* Read the colormap from a BMP file */ -{ - int i; - - switch (mapentrysize) { - case 3: - /* BGR format (occurs in OS/2 files) */ - for (i = 0; i < cmaplen; i++) { - sinfo->colormap[2][i] = (JSAMPLE) read_byte(sinfo); - sinfo->colormap[1][i] = (JSAMPLE) read_byte(sinfo); - sinfo->colormap[0][i] = (JSAMPLE) read_byte(sinfo); - } - break; - case 4: - /* BGR0 format (occurs in MS Windows files) */ - for (i = 0; i < cmaplen; i++) { - sinfo->colormap[2][i] = (JSAMPLE) read_byte(sinfo); - sinfo->colormap[1][i] = (JSAMPLE) read_byte(sinfo); - sinfo->colormap[0][i] = (JSAMPLE) read_byte(sinfo); - (void) read_byte(sinfo); - } - break; - default: - ERREXIT(sinfo->cinfo, JERR_BMP_BADCMAP); - break; - } -} - - -/* - * Read one row of pixels. - * The image has been read into the whole_image array, but is otherwise - * unprocessed. We must read it out in top-to-bottom row order, and if - * it is an 8-bit image, we must expand colormapped pixels to 24bit format. - */ - -METHODDEF(JDIMENSION) -get_8bit_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) -/* This version is for reading 8-bit colormap indexes */ -{ - bmp_source_ptr source = (bmp_source_ptr) sinfo; - register JSAMPARRAY colormap = source->colormap; - JSAMPARRAY image_ptr; - register int t; - register JSAMPROW inptr, outptr; - register JDIMENSION col; - - /* Fetch next row from virtual array */ - source->source_row--; - image_ptr = (*cinfo->mem->access_virt_sarray) - ((j_common_ptr) cinfo, source->whole_image, - source->source_row, (JDIMENSION) 1, FALSE); - - /* Expand the colormap indexes to real data */ - inptr = image_ptr[0]; - outptr = source->pub.buffer[0]; - for (col = cinfo->image_width; col > 0; col--) { - t = GETJSAMPLE(*inptr++); - *outptr++ = colormap[0][t]; /* can omit GETJSAMPLE() safely */ - *outptr++ = colormap[1][t]; - *outptr++ = colormap[2][t]; - } - - return 1; -} - - -METHODDEF(JDIMENSION) -get_24bit_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) -/* This version is for reading 24-bit pixels */ -{ - bmp_source_ptr source = (bmp_source_ptr) sinfo; - JSAMPARRAY image_ptr; - register JSAMPROW inptr, outptr; - register JDIMENSION col; - - /* Fetch next row from virtual array */ - source->source_row--; - image_ptr = (*cinfo->mem->access_virt_sarray) - ((j_common_ptr) cinfo, source->whole_image, - source->source_row, (JDIMENSION) 1, FALSE); - - /* Transfer data. Note source values are in BGR order - * (even though Microsoft's own documents say the opposite). - */ - inptr = image_ptr[0]; - outptr = source->pub.buffer[0]; - for (col = cinfo->image_width; col > 0; col--) { - outptr[2] = *inptr++; /* can omit GETJSAMPLE() safely */ - outptr[1] = *inptr++; - outptr[0] = *inptr++; - outptr += 3; - } - - return 1; -} - - -METHODDEF(JDIMENSION) -get_32bit_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) -/* This version is for reading 32-bit pixels */ -{ - bmp_source_ptr source = (bmp_source_ptr) sinfo; - JSAMPARRAY image_ptr; - register JSAMPROW inptr, outptr; - register JDIMENSION col; - - /* Fetch next row from virtual array */ - source->source_row--; - image_ptr = (*cinfo->mem->access_virt_sarray) - ((j_common_ptr) cinfo, source->whole_image, - source->source_row, (JDIMENSION) 1, FALSE); - /* Transfer data. Note source values are in BGR order - * (even though Microsoft's own documents say the opposite). - */ - inptr = image_ptr[0]; - outptr = source->pub.buffer[0]; - for (col = cinfo->image_width; col > 0; col--) { - outptr[2] = *inptr++; /* can omit GETJSAMPLE() safely */ - outptr[1] = *inptr++; - outptr[0] = *inptr++; - inptr++; /* skip the 4th byte (Alpha channel) */ - outptr += 3; - } - - return 1; -} - - -/* - * This method loads the image into whole_image during the first call on - * get_pixel_rows. The get_pixel_rows pointer is then adjusted to call - * get_8bit_row, get_24bit_row, or get_32bit_row on subsequent calls. - */ - -METHODDEF(JDIMENSION) -preload_image (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) -{ - bmp_source_ptr source = (bmp_source_ptr) sinfo; - register FILE *infile = source->pub.input_file; - register int c; - register JSAMPROW out_ptr; - JSAMPARRAY image_ptr; - JDIMENSION row, col; - cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress; - - /* Read the data into a virtual array in input-file row order. */ - for (row = 0; row < cinfo->image_height; row++) { - if (progress != NULL) { - progress->pub.pass_counter = (long) row; - progress->pub.pass_limit = (long) cinfo->image_height; - (*progress->pub.progress_monitor) ((j_common_ptr) cinfo); - } - image_ptr = (*cinfo->mem->access_virt_sarray) - ((j_common_ptr) cinfo, source->whole_image, - row, (JDIMENSION) 1, TRUE); - out_ptr = image_ptr[0]; - for (col = source->row_width; col > 0; col--) { - /* inline copy of read_byte() for speed */ - if ((c = getc(infile)) == EOF) - ERREXIT(cinfo, JERR_INPUT_EOF); - *out_ptr++ = (JSAMPLE) c; - } - } - if (progress != NULL) - progress->completed_extra_passes++; - - /* Set up to read from the virtual array in top-to-bottom order */ - switch (source->bits_per_pixel) { - case 8: - source->pub.get_pixel_rows = get_8bit_row; - break; - case 24: - source->pub.get_pixel_rows = get_24bit_row; - break; - case 32: - source->pub.get_pixel_rows = get_32bit_row; - break; - default: - ERREXIT(cinfo, JERR_BMP_BADDEPTH); - } - source->source_row = cinfo->image_height; - - /* And read the first row */ - return (*source->pub.get_pixel_rows) (cinfo, sinfo); -} - - -/* - * Read the file header; return image size and component count. - */ - -METHODDEF(void) -start_input_bmp (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) -{ - bmp_source_ptr source = (bmp_source_ptr) sinfo; - U_CHAR bmpfileheader[14]; - U_CHAR bmpinfoheader[64]; -#define GET_2B(array,offset) ((unsigned int) UCH(array[offset]) + \ - (((unsigned int) UCH(array[offset+1])) << 8)) -#define GET_4B(array,offset) ((INT32) UCH(array[offset]) + \ - (((INT32) UCH(array[offset+1])) << 8) + \ - (((INT32) UCH(array[offset+2])) << 16) + \ - (((INT32) UCH(array[offset+3])) << 24)) - INT32 bfOffBits; - INT32 headerSize; - INT32 biWidth; - INT32 biHeight; - unsigned int biPlanes; - INT32 biCompression; - INT32 biXPelsPerMeter,biYPelsPerMeter; - INT32 biClrUsed = 0; - int mapentrysize = 0; /* 0 indicates no colormap */ - INT32 bPad; - JDIMENSION row_width; - - /* Read and verify the bitmap file header */ - if (! ReadOK(source->pub.input_file, bmpfileheader, 14)) - ERREXIT(cinfo, JERR_INPUT_EOF); - if (GET_2B(bmpfileheader,0) != 0x4D42) /* 'BM' */ - ERREXIT(cinfo, JERR_BMP_NOT); - bfOffBits = (INT32) GET_4B(bmpfileheader,10); - /* We ignore the remaining fileheader fields */ - - /* The infoheader might be 12 bytes (OS/2 1.x), 40 bytes (Windows), - * or 64 bytes (OS/2 2.x). Check the first 4 bytes to find out which. - */ - if (! ReadOK(source->pub.input_file, bmpinfoheader, 4)) - ERREXIT(cinfo, JERR_INPUT_EOF); - headerSize = (INT32) GET_4B(bmpinfoheader,0); - if (headerSize < 12 || headerSize > 64) - ERREXIT(cinfo, JERR_BMP_BADHEADER); - if (! ReadOK(source->pub.input_file, bmpinfoheader+4, headerSize-4)) - ERREXIT(cinfo, JERR_INPUT_EOF); - - switch ((int) headerSize) { - case 12: - /* Decode OS/2 1.x header (Microsoft calls this a BITMAPCOREHEADER) */ - biWidth = (INT32) GET_2B(bmpinfoheader,4); - biHeight = (INT32) GET_2B(bmpinfoheader,6); - biPlanes = GET_2B(bmpinfoheader,8); - source->bits_per_pixel = (int) GET_2B(bmpinfoheader,10); - - switch (source->bits_per_pixel) { - case 8: /* colormapped image */ - mapentrysize = 3; /* OS/2 uses RGBTRIPLE colormap */ - TRACEMS2(cinfo, 1, JTRC_BMP_OS2_MAPPED, (int) biWidth, (int) biHeight); - break; - case 24: /* RGB image */ - TRACEMS2(cinfo, 1, JTRC_BMP_OS2, (int) biWidth, (int) biHeight); - break; - default: - ERREXIT(cinfo, JERR_BMP_BADDEPTH); - break; - } - break; - case 40: - case 64: - /* Decode Windows 3.x header (Microsoft calls this a BITMAPINFOHEADER) */ - /* or OS/2 2.x header, which has additional fields that we ignore */ - biWidth = GET_4B(bmpinfoheader,4); - biHeight = GET_4B(bmpinfoheader,8); - biPlanes = GET_2B(bmpinfoheader,12); - source->bits_per_pixel = (int) GET_2B(bmpinfoheader,14); - biCompression = GET_4B(bmpinfoheader,16); - biXPelsPerMeter = GET_4B(bmpinfoheader,24); - biYPelsPerMeter = GET_4B(bmpinfoheader,28); - biClrUsed = GET_4B(bmpinfoheader,32); - /* biSizeImage, biClrImportant fields are ignored */ - - switch (source->bits_per_pixel) { - case 8: /* colormapped image */ - mapentrysize = 4; /* Windows uses RGBQUAD colormap */ - TRACEMS2(cinfo, 1, JTRC_BMP_MAPPED, (int) biWidth, (int) biHeight); - break; - case 24: /* RGB image */ - TRACEMS2(cinfo, 1, JTRC_BMP, (int) biWidth, (int) biHeight); - break; - case 32: /* RGB image + Alpha channel */ - TRACEMS2(cinfo, 1, JTRC_BMP, (int) biWidth, (int) biHeight); - break; - default: - ERREXIT(cinfo, JERR_BMP_BADDEPTH); - break; - } - if (biCompression != 0) - ERREXIT(cinfo, JERR_BMP_COMPRESSED); - - if (biXPelsPerMeter > 0 && biYPelsPerMeter > 0) { - /* Set JFIF density parameters from the BMP data */ - cinfo->X_density = (UINT16) (biXPelsPerMeter/100); /* 100 cm per meter */ - cinfo->Y_density = (UINT16) (biYPelsPerMeter/100); - cinfo->density_unit = 2; /* dots/cm */ - } - break; - default: - ERREXIT(cinfo, JERR_BMP_BADHEADER); - return; - } - - if (biWidth <= 0 || biHeight <= 0) - ERREXIT(cinfo, JERR_BMP_EMPTY); - if (biPlanes != 1) - ERREXIT(cinfo, JERR_BMP_BADPLANES); - - /* Compute distance to bitmap data --- will adjust for colormap below */ - bPad = bfOffBits - (headerSize + 14); - - /* Read the colormap, if any */ - if (mapentrysize > 0) { - if (biClrUsed <= 0) - biClrUsed = 256; /* assume it's 256 */ - else if (biClrUsed > 256) - ERREXIT(cinfo, JERR_BMP_BADCMAP); - /* Allocate space to store the colormap */ - source->colormap = (*cinfo->mem->alloc_sarray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, - (JDIMENSION) biClrUsed, (JDIMENSION) 3); - /* and read it from the file */ - read_colormap(source, (int) biClrUsed, mapentrysize); - /* account for size of colormap */ - bPad -= biClrUsed * mapentrysize; - } - - /* Skip any remaining pad bytes */ - if (bPad < 0) /* incorrect bfOffBits value? */ - ERREXIT(cinfo, JERR_BMP_BADHEADER); - while (--bPad >= 0) { - (void) read_byte(source); - } - - /* Compute row width in file, including padding to 4-byte boundary */ - if (source->bits_per_pixel == 24) - row_width = (JDIMENSION) (biWidth * 3); - else if (source->bits_per_pixel == 32) - row_width = (JDIMENSION) (biWidth * 4); - else - row_width = (JDIMENSION) biWidth; - while ((row_width & 3) != 0) row_width++; - source->row_width = row_width; - - /* Allocate space for inversion array, prepare for preload pass */ - source->whole_image = (*cinfo->mem->request_virt_sarray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE, - row_width, (JDIMENSION) biHeight, (JDIMENSION) 1); - source->pub.get_pixel_rows = preload_image; - if (cinfo->progress != NULL) { - cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress; - progress->total_extra_passes++; /* count file input as separate pass */ - } - - /* Allocate one-row buffer for returned data */ - source->pub.buffer = (*cinfo->mem->alloc_sarray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, - (JDIMENSION) (biWidth * 3), (JDIMENSION) 1); - source->pub.buffer_height = 1; - - cinfo->in_color_space = JCS_RGB; - cinfo->input_components = 3; - cinfo->data_precision = 8; - cinfo->image_width = (JDIMENSION) biWidth; - cinfo->image_height = (JDIMENSION) biHeight; -} - - -/* - * Finish up at the end of the file. - */ - -METHODDEF(void) -finish_input_bmp (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) -{ - /* no work */ -} - - -/* - * The module selection routine for BMP format input. - */ - -GLOBAL(cjpeg_source_ptr) -jinit_read_bmp (j_compress_ptr cinfo) -{ - bmp_source_ptr source; - - /* Create module interface object */ - source = (bmp_source_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(bmp_source_struct)); - source->cinfo = cinfo; /* make back link for subroutines */ - /* Fill in method ptrs, except get_pixel_rows which start_input sets */ - source->pub.start_input = start_input_bmp; - source->pub.finish_input = finish_input_bmp; - - return (cjpeg_source_ptr) source; -} - -#endif /* BMP_SUPPORTED */ diff --git a/jpeg/rdcolmap.c b/jpeg/rdcolmap.c deleted file mode 100755 index 42b3437..0000000 --- a/jpeg/rdcolmap.c +++ /dev/null @@ -1,253 +0,0 @@ -/* - * rdcolmap.c - * - * Copyright (C) 1994-1996, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file implements djpeg's "-map file" switch. It reads a source image - * and constructs a colormap to be supplied to the JPEG decompressor. - * - * Currently, these file formats are supported for the map file: - * GIF: the contents of the GIF's global colormap are used. - * PPM (either text or raw flavor): the entire file is read and - * each unique pixel value is entered in the map. - * Note that reading a large PPM file will be horrendously slow. - * Typically, a PPM-format map file should contain just one pixel - * of each desired color. Such a file can be extracted from an - * ordinary image PPM file with ppmtomap(1). - * - * Rescaling a PPM that has a maxval unequal to MAXJSAMPLE is not - * currently implemented. - */ - -#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ - -#ifdef QUANT_2PASS_SUPPORTED /* otherwise can't quantize to supplied map */ - -/* Portions of this code are based on the PBMPLUS library, which is: -** -** Copyright (C) 1988 by Jef Poskanzer. -** -** Permission to use, copy, modify, and distribute this software and its -** documentation for any purpose and without fee is hereby granted, provided -** that the above copyright notice appear in all copies and that both that -** copyright notice and this permission notice appear in supporting -** documentation. This software is provided "as is" without express or -** implied warranty. -*/ - - -/* - * Add a (potentially) new color to the color map. - */ - -LOCAL(void) -add_map_entry (j_decompress_ptr cinfo, int R, int G, int B) -{ - JSAMPROW colormap0 = cinfo->colormap[0]; - JSAMPROW colormap1 = cinfo->colormap[1]; - JSAMPROW colormap2 = cinfo->colormap[2]; - int ncolors = cinfo->actual_number_of_colors; - int index; - - /* Check for duplicate color. */ - for (index = 0; index < ncolors; index++) { - if (GETJSAMPLE(colormap0[index]) == R && - GETJSAMPLE(colormap1[index]) == G && - GETJSAMPLE(colormap2[index]) == B) - return; /* color is already in map */ - } - - /* Check for map overflow. */ - if (ncolors >= (MAXJSAMPLE+1)) - ERREXIT1(cinfo, JERR_QUANT_MANY_COLORS, (MAXJSAMPLE+1)); - - /* OK, add color to map. */ - colormap0[ncolors] = (JSAMPLE) R; - colormap1[ncolors] = (JSAMPLE) G; - colormap2[ncolors] = (JSAMPLE) B; - cinfo->actual_number_of_colors++; -} - - -/* - * Extract color map from a GIF file. - */ - -LOCAL(void) -read_gif_map (j_decompress_ptr cinfo, FILE * infile) -{ - int header[13]; - int i, colormaplen; - int R, G, B; - - /* Initial 'G' has already been read by read_color_map */ - /* Read the rest of the GIF header and logical screen descriptor */ - for (i = 1; i < 13; i++) { - if ((header[i] = getc(infile)) == EOF) - ERREXIT(cinfo, JERR_BAD_CMAP_FILE); - } - - /* Verify GIF Header */ - if (header[1] != 'I' || header[2] != 'F') - ERREXIT(cinfo, JERR_BAD_CMAP_FILE); - - /* There must be a global color map. */ - if ((header[10] & 0x80) == 0) - ERREXIT(cinfo, JERR_BAD_CMAP_FILE); - - /* OK, fetch it. */ - colormaplen = 2 << (header[10] & 0x07); - - for (i = 0; i < colormaplen; i++) { - R = getc(infile); - G = getc(infile); - B = getc(infile); - if (R == EOF || G == EOF || B == EOF) - ERREXIT(cinfo, JERR_BAD_CMAP_FILE); - add_map_entry(cinfo, - R << (BITS_IN_JSAMPLE-8), - G << (BITS_IN_JSAMPLE-8), - B << (BITS_IN_JSAMPLE-8)); - } -} - - -/* Support routines for reading PPM */ - - -LOCAL(int) -pbm_getc (FILE * infile) -/* Read next char, skipping over any comments */ -/* A comment/newline sequence is returned as a newline */ -{ - register int ch; - - ch = getc(infile); - if (ch == '#') { - do { - ch = getc(infile); - } while (ch != '\n' && ch != EOF); - } - return ch; -} - - -LOCAL(unsigned int) -read_pbm_integer (j_decompress_ptr cinfo, FILE * infile) -/* Read an unsigned decimal integer from the PPM file */ -/* Swallows one trailing character after the integer */ -/* Note that on a 16-bit-int machine, only values up to 64k can be read. */ -/* This should not be a problem in practice. */ -{ - register int ch; - register unsigned int val; - - /* Skip any leading whitespace */ - do { - ch = pbm_getc(infile); - if (ch == EOF) - ERREXIT(cinfo, JERR_BAD_CMAP_FILE); - } while (ch == ' ' || ch == '\t' || ch == '\n' || ch == '\r'); - - if (ch < '0' || ch > '9') - ERREXIT(cinfo, JERR_BAD_CMAP_FILE); - - val = ch - '0'; - while ((ch = pbm_getc(infile)) >= '0' && ch <= '9') { - val *= 10; - val += ch - '0'; - } - return val; -} - - -/* - * Extract color map from a PPM file. - */ - -LOCAL(void) -read_ppm_map (j_decompress_ptr cinfo, FILE * infile) -{ - int c; - unsigned int w, h, maxval, row, col; - int R, G, B; - - /* Initial 'P' has already been read by read_color_map */ - c = getc(infile); /* save format discriminator for a sec */ - - /* while we fetch the remaining header info */ - w = read_pbm_integer(cinfo, infile); - h = read_pbm_integer(cinfo, infile); - maxval = read_pbm_integer(cinfo, infile); - - if (w <= 0 || h <= 0 || maxval <= 0) /* error check */ - ERREXIT(cinfo, JERR_BAD_CMAP_FILE); - - /* For now, we don't support rescaling from an unusual maxval. */ - if (maxval != (unsigned int) MAXJSAMPLE) - ERREXIT(cinfo, JERR_BAD_CMAP_FILE); - - switch (c) { - case '3': /* it's a text-format PPM file */ - for (row = 0; row < h; row++) { - for (col = 0; col < w; col++) { - R = read_pbm_integer(cinfo, infile); - G = read_pbm_integer(cinfo, infile); - B = read_pbm_integer(cinfo, infile); - add_map_entry(cinfo, R, G, B); - } - } - break; - - case '6': /* it's a raw-format PPM file */ - for (row = 0; row < h; row++) { - for (col = 0; col < w; col++) { - R = getc(infile); - G = getc(infile); - B = getc(infile); - if (R == EOF || G == EOF || B == EOF) - ERREXIT(cinfo, JERR_BAD_CMAP_FILE); - add_map_entry(cinfo, R, G, B); - } - } - break; - - default: - ERREXIT(cinfo, JERR_BAD_CMAP_FILE); - break; - } -} - - -/* - * Main entry point from djpeg.c. - * Input: opened input file (from file name argument on command line). - * Output: colormap and actual_number_of_colors fields are set in cinfo. - */ - -GLOBAL(void) -read_color_map (j_decompress_ptr cinfo, FILE * infile) -{ - /* Allocate space for a color map of maximum supported size. */ - cinfo->colormap = (*cinfo->mem->alloc_sarray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, - (JDIMENSION) (MAXJSAMPLE+1), (JDIMENSION) 3); - cinfo->actual_number_of_colors = 0; /* initialize map to empty */ - - /* Read first byte to determine file format */ - switch (getc(infile)) { - case 'G': - read_gif_map(cinfo, infile); - break; - case 'P': - read_ppm_map(cinfo, infile); - break; - default: - ERREXIT(cinfo, JERR_BAD_CMAP_FILE); - break; - } -} - -#endif /* QUANT_2PASS_SUPPORTED */ diff --git a/jpeg/rdgif.c b/jpeg/rdgif.c deleted file mode 100755 index b27c167..0000000 --- a/jpeg/rdgif.c +++ /dev/null @@ -1,38 +0,0 @@ -/* - * rdgif.c - * - * Copyright (C) 1991-1997, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains routines to read input images in GIF format. - * - ***************************************************************************** - * NOTE: to avoid entanglements with Unisys' patent on LZW compression, * - * the ability to read GIF files has been removed from the IJG distribution. * - * Sorry about that. * - ***************************************************************************** - * - * We are required to state that - * "The Graphics Interchange Format(c) is the Copyright property of - * CompuServe Incorporated. GIF(sm) is a Service Mark property of - * CompuServe Incorporated." - */ - -#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ - -#ifdef GIF_SUPPORTED - -/* - * The module selection routine for GIF format input. - */ - -GLOBAL(cjpeg_source_ptr) -jinit_read_gif (j_compress_ptr cinfo) -{ - fprintf(stderr, "GIF input is unsupported for legal reasons. Sorry.\n"); - exit(EXIT_FAILURE); - return NULL; /* keep compiler happy */ -} - -#endif /* GIF_SUPPORTED */ diff --git a/jpeg/rdjpgcom.1 b/jpeg/rdjpgcom.1 deleted file mode 100755 index 97611df..0000000 --- a/jpeg/rdjpgcom.1 +++ /dev/null @@ -1,63 +0,0 @@ -.TH RDJPGCOM 1 "02 April 2009" -.SH NAME -rdjpgcom \- display text comments from a JPEG file -.SH SYNOPSIS -.B rdjpgcom -[ -.B \-raw -] -[ -.B \-verbose -] -[ -.I filename -] -.LP -.SH DESCRIPTION -.LP -.B rdjpgcom -reads the named JPEG/JFIF file, or the standard input if no file is named, -and prints any text comments found in the file on the standard output. -.PP -The JPEG standard allows "comment" (COM) blocks to occur within a JPEG file. -Although the standard doesn't actually define what COM blocks are for, they -are widely used to hold user-supplied text strings. This lets you add -annotations, titles, index terms, etc to your JPEG files, and later retrieve -them as text. COM blocks do not interfere with the image stored in the JPEG -file. The maximum size of a COM block is 64K, but you can have as many of -them as you like in one JPEG file. -.SH OPTIONS -.TP -.B \-raw -Normally -.B rdjpgcom -escapes non-printable characters in comments, for security reasons. -This option avoids that. -.PP -.B \-verbose -Causes -.B rdjpgcom -to also display the JPEG image dimensions. -.PP -Switch names may be abbreviated, and are not case sensitive. -.SH HINTS -.B rdjpgcom -does not depend on the IJG JPEG library. Its source code is intended as an -illustration of the minimum amount of code required to parse a JPEG file -header correctly. -.PP -In -.B \-verbose -mode, -.B rdjpgcom -will also attempt to print the contents of any "APP12" markers as text. -Some digital cameras produce APP12 markers containing useful textual -information. If you like, you can modify the source code to print -other APPn marker types as well. -.SH SEE ALSO -.BR cjpeg (1), -.BR djpeg (1), -.BR jpegtran (1), -.BR wrjpgcom (1) -.SH AUTHOR -Independent JPEG Group diff --git a/jpeg/rdjpgcom.c b/jpeg/rdjpgcom.c deleted file mode 100755 index 3719154..0000000 --- a/jpeg/rdjpgcom.c +++ /dev/null @@ -1,515 +0,0 @@ -/* - * rdjpgcom.c - * - * Copyright (C) 1994-1997, Thomas G. Lane. - * Modified 2009 by Bill Allombert, Guido Vollbeding. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains a very simple stand-alone application that displays - * the text in COM (comment) markers in a JFIF file. - * This may be useful as an example of the minimum logic needed to parse - * JPEG markers. - */ - -#define JPEG_CJPEG_DJPEG /* to get the command-line config symbols */ -#include "jinclude.h" /* get auto-config symbols, */ - -#ifdef HAVE_LOCALE_H -#include /* Bill Allombert: use locale for isprint */ -#endif -#include /* to declare isupper(), tolower() */ -#ifdef USE_SETMODE -#include /* to declare setmode()'s parameter macros */ -/* If you have setmode() but not , just delete this line: */ -#include /* to declare setmode() */ -#endif - -#ifdef USE_CCOMMAND /* command-line reader for Macintosh */ -#ifdef __MWERKS__ -#include /* Metrowerks needs this */ -#include /* ... and this */ -#endif -#ifdef THINK_C -#include /* Think declares it here */ -#endif -#endif - -#ifdef DONT_USE_B_MODE /* define mode parameters for fopen() */ -#define READ_BINARY "r" -#else -#ifdef VMS /* VMS is very nonstandard */ -#define READ_BINARY "rb", "ctx=stm" -#else /* standard ANSI-compliant case */ -#define READ_BINARY "rb" -#endif -#endif - -#ifndef EXIT_FAILURE /* define exit() codes if not provided */ -#define EXIT_FAILURE 1 -#endif -#ifndef EXIT_SUCCESS -#ifdef VMS -#define EXIT_SUCCESS 1 /* VMS is very nonstandard */ -#else -#define EXIT_SUCCESS 0 -#endif -#endif - - -/* - * These macros are used to read the input file. - * To reuse this code in another application, you might need to change these. - */ - -static FILE * infile; /* input JPEG file */ - -/* Return next input byte, or EOF if no more */ -#define NEXTBYTE() getc(infile) - - -/* Error exit handler */ -#define ERREXIT(msg) (fprintf(stderr, "%s\n", msg), exit(EXIT_FAILURE)) - - -/* Read one byte, testing for EOF */ -static int -read_1_byte (void) -{ - int c; - - c = NEXTBYTE(); - if (c == EOF) - ERREXIT("Premature EOF in JPEG file"); - return c; -} - -/* Read 2 bytes, convert to unsigned int */ -/* All 2-byte quantities in JPEG markers are MSB first */ -static unsigned int -read_2_bytes (void) -{ - int c1, c2; - - c1 = NEXTBYTE(); - if (c1 == EOF) - ERREXIT("Premature EOF in JPEG file"); - c2 = NEXTBYTE(); - if (c2 == EOF) - ERREXIT("Premature EOF in JPEG file"); - return (((unsigned int) c1) << 8) + ((unsigned int) c2); -} - - -/* - * JPEG markers consist of one or more 0xFF bytes, followed by a marker - * code byte (which is not an FF). Here are the marker codes of interest - * in this program. (See jdmarker.c for a more complete list.) - */ - -#define M_SOF0 0xC0 /* Start Of Frame N */ -#define M_SOF1 0xC1 /* N indicates which compression process */ -#define M_SOF2 0xC2 /* Only SOF0-SOF2 are now in common use */ -#define M_SOF3 0xC3 -#define M_SOF5 0xC5 /* NB: codes C4 and CC are NOT SOF markers */ -#define M_SOF6 0xC6 -#define M_SOF7 0xC7 -#define M_SOF9 0xC9 -#define M_SOF10 0xCA -#define M_SOF11 0xCB -#define M_SOF13 0xCD -#define M_SOF14 0xCE -#define M_SOF15 0xCF -#define M_SOI 0xD8 /* Start Of Image (beginning of datastream) */ -#define M_EOI 0xD9 /* End Of Image (end of datastream) */ -#define M_SOS 0xDA /* Start Of Scan (begins compressed data) */ -#define M_APP0 0xE0 /* Application-specific marker, type N */ -#define M_APP12 0xEC /* (we don't bother to list all 16 APPn's) */ -#define M_COM 0xFE /* COMment */ - - -/* - * Find the next JPEG marker and return its marker code. - * We expect at least one FF byte, possibly more if the compressor used FFs - * to pad the file. - * There could also be non-FF garbage between markers. The treatment of such - * garbage is unspecified; we choose to skip over it but emit a warning msg. - * NB: this routine must not be used after seeing SOS marker, since it will - * not deal correctly with FF/00 sequences in the compressed image data... - */ - -static int -next_marker (void) -{ - int c; - int discarded_bytes = 0; - - /* Find 0xFF byte; count and skip any non-FFs. */ - c = read_1_byte(); - while (c != 0xFF) { - discarded_bytes++; - c = read_1_byte(); - } - /* Get marker code byte, swallowing any duplicate FF bytes. Extra FFs - * are legal as pad bytes, so don't count them in discarded_bytes. - */ - do { - c = read_1_byte(); - } while (c == 0xFF); - - if (discarded_bytes != 0) { - fprintf(stderr, "Warning: garbage data found in JPEG file\n"); - } - - return c; -} - - -/* - * Read the initial marker, which should be SOI. - * For a JFIF file, the first two bytes of the file should be literally - * 0xFF M_SOI. To be more general, we could use next_marker, but if the - * input file weren't actually JPEG at all, next_marker might read the whole - * file and then return a misleading error message... - */ - -static int -first_marker (void) -{ - int c1, c2; - - c1 = NEXTBYTE(); - c2 = NEXTBYTE(); - if (c1 != 0xFF || c2 != M_SOI) - ERREXIT("Not a JPEG file"); - return c2; -} - - -/* - * Most types of marker are followed by a variable-length parameter segment. - * This routine skips over the parameters for any marker we don't otherwise - * want to process. - * Note that we MUST skip the parameter segment explicitly in order not to - * be fooled by 0xFF bytes that might appear within the parameter segment; - * such bytes do NOT introduce new markers. - */ - -static void -skip_variable (void) -/* Skip over an unknown or uninteresting variable-length marker */ -{ - unsigned int length; - - /* Get the marker parameter length count */ - length = read_2_bytes(); - /* Length includes itself, so must be at least 2 */ - if (length < 2) - ERREXIT("Erroneous JPEG marker length"); - length -= 2; - /* Skip over the remaining bytes */ - while (length > 0) { - (void) read_1_byte(); - length--; - } -} - - -/* - * Process a COM marker. - * We want to print out the marker contents as legible text; - * we must guard against non-text junk and varying newline representations. - */ - -static void -process_COM (int raw) -{ - unsigned int length; - int ch; - int lastch = 0; - - /* Bill Allombert: set locale properly for isprint */ -#ifdef HAVE_LOCALE_H - setlocale(LC_CTYPE, ""); -#endif - - /* Get the marker parameter length count */ - length = read_2_bytes(); - /* Length includes itself, so must be at least 2 */ - if (length < 2) - ERREXIT("Erroneous JPEG marker length"); - length -= 2; - - while (length > 0) { - ch = read_1_byte(); - if (raw) { - putc(ch, stdout); - /* Emit the character in a readable form. - * Nonprintables are converted to \nnn form, - * while \ is converted to \\. - * Newlines in CR, CR/LF, or LF form will be printed as one newline. - */ - } else if (ch == '\r') { - printf("\n"); - } else if (ch == '\n') { - if (lastch != '\r') - printf("\n"); - } else if (ch == '\\') { - printf("\\\\"); - } else if (isprint(ch)) { - putc(ch, stdout); - } else { - printf("\\%03o", ch); - } - lastch = ch; - length--; - } - printf("\n"); - - /* Bill Allombert: revert to C locale */ -#ifdef HAVE_LOCALE_H - setlocale(LC_CTYPE, "C"); -#endif -} - - -/* - * Process a SOFn marker. - * This code is only needed if you want to know the image dimensions... - */ - -static void -process_SOFn (int marker) -{ - unsigned int length; - unsigned int image_height, image_width; - int data_precision, num_components; - const char * process; - int ci; - - length = read_2_bytes(); /* usual parameter length count */ - - data_precision = read_1_byte(); - image_height = read_2_bytes(); - image_width = read_2_bytes(); - num_components = read_1_byte(); - - switch (marker) { - case M_SOF0: process = "Baseline"; break; - case M_SOF1: process = "Extended sequential"; break; - case M_SOF2: process = "Progressive"; break; - case M_SOF3: process = "Lossless"; break; - case M_SOF5: process = "Differential sequential"; break; - case M_SOF6: process = "Differential progressive"; break; - case M_SOF7: process = "Differential lossless"; break; - case M_SOF9: process = "Extended sequential, arithmetic coding"; break; - case M_SOF10: process = "Progressive, arithmetic coding"; break; - case M_SOF11: process = "Lossless, arithmetic coding"; break; - case M_SOF13: process = "Differential sequential, arithmetic coding"; break; - case M_SOF14: process = "Differential progressive, arithmetic coding"; break; - case M_SOF15: process = "Differential lossless, arithmetic coding"; break; - default: process = "Unknown"; break; - } - - printf("JPEG image is %uw * %uh, %d color components, %d bits per sample\n", - image_width, image_height, num_components, data_precision); - printf("JPEG process: %s\n", process); - - if (length != (unsigned int) (8 + num_components * 3)) - ERREXIT("Bogus SOF marker length"); - - for (ci = 0; ci < num_components; ci++) { - (void) read_1_byte(); /* Component ID code */ - (void) read_1_byte(); /* H, V sampling factors */ - (void) read_1_byte(); /* Quantization table number */ - } -} - - -/* - * Parse the marker stream until SOS or EOI is seen; - * display any COM markers. - * While the companion program wrjpgcom will always insert COM markers before - * SOFn, other implementations might not, so we scan to SOS before stopping. - * If we were only interested in the image dimensions, we would stop at SOFn. - * (Conversely, if we only cared about COM markers, there would be no need - * for special code to handle SOFn; we could treat it like other markers.) - */ - -static int -scan_JPEG_header (int verbose, int raw) -{ - int marker; - - /* Expect SOI at start of file */ - if (first_marker() != M_SOI) - ERREXIT("Expected SOI marker first"); - - /* Scan miscellaneous markers until we reach SOS. */ - for (;;) { - marker = next_marker(); - switch (marker) { - /* Note that marker codes 0xC4, 0xC8, 0xCC are not, and must not be, - * treated as SOFn. C4 in particular is actually DHT. - */ - case M_SOF0: /* Baseline */ - case M_SOF1: /* Extended sequential, Huffman */ - case M_SOF2: /* Progressive, Huffman */ - case M_SOF3: /* Lossless, Huffman */ - case M_SOF5: /* Differential sequential, Huffman */ - case M_SOF6: /* Differential progressive, Huffman */ - case M_SOF7: /* Differential lossless, Huffman */ - case M_SOF9: /* Extended sequential, arithmetic */ - case M_SOF10: /* Progressive, arithmetic */ - case M_SOF11: /* Lossless, arithmetic */ - case M_SOF13: /* Differential sequential, arithmetic */ - case M_SOF14: /* Differential progressive, arithmetic */ - case M_SOF15: /* Differential lossless, arithmetic */ - if (verbose) - process_SOFn(marker); - else - skip_variable(); - break; - - case M_SOS: /* stop before hitting compressed data */ - return marker; - - case M_EOI: /* in case it's a tables-only JPEG stream */ - return marker; - - case M_COM: - process_COM(raw); - break; - - case M_APP12: - /* Some digital camera makers put useful textual information into - * APP12 markers, so we print those out too when in -verbose mode. - */ - if (verbose) { - printf("APP12 contains:\n"); - process_COM(raw); - } else - skip_variable(); - break; - - default: /* Anything else just gets skipped */ - skip_variable(); /* we assume it has a parameter count... */ - break; - } - } /* end loop */ -} - - -/* Command line parsing code */ - -static const char * progname; /* program name for error messages */ - - -static void -usage (void) -/* complain about bad command line */ -{ - fprintf(stderr, "rdjpgcom displays any textual comments in a JPEG file.\n"); - - fprintf(stderr, "Usage: %s [switches] [inputfile]\n", progname); - - fprintf(stderr, "Switches (names may be abbreviated):\n"); - fprintf(stderr, " -raw Display non-printable characters in comments (unsafe)\n"); - fprintf(stderr, " -verbose Also display dimensions of JPEG image\n"); - - exit(EXIT_FAILURE); -} - - -static int -keymatch (char * arg, const char * keyword, int minchars) -/* Case-insensitive matching of (possibly abbreviated) keyword switches. */ -/* keyword is the constant keyword (must be lower case already), */ -/* minchars is length of minimum legal abbreviation. */ -{ - register int ca, ck; - register int nmatched = 0; - - while ((ca = *arg++) != '\0') { - if ((ck = *keyword++) == '\0') - return 0; /* arg longer than keyword, no good */ - if (isupper(ca)) /* force arg to lcase (assume ck is already) */ - ca = tolower(ca); - if (ca != ck) - return 0; /* no good */ - nmatched++; /* count matched characters */ - } - /* reached end of argument; fail if it's too short for unique abbrev */ - if (nmatched < minchars) - return 0; - return 1; /* A-OK */ -} - - -/* - * The main program. - */ - -int -main (int argc, char **argv) -{ - int argn; - char * arg; - int verbose = 0, raw = 0; - - /* On Mac, fetch a command line. */ -#ifdef USE_CCOMMAND - argc = ccommand(&argv); -#endif - - progname = argv[0]; - if (progname == NULL || progname[0] == 0) - progname = "rdjpgcom"; /* in case C library doesn't provide it */ - - /* Parse switches, if any */ - for (argn = 1; argn < argc; argn++) { - arg = argv[argn]; - if (arg[0] != '-') - break; /* not switch, must be file name */ - arg++; /* advance over '-' */ - if (keymatch(arg, "verbose", 1)) { - verbose++; - } else if (keymatch(arg, "raw", 1)) { - raw = 1; - } else - usage(); - } - - /* Open the input file. */ - /* Unix style: expect zero or one file name */ - if (argn < argc-1) { - fprintf(stderr, "%s: only one input file\n", progname); - usage(); - } - if (argn < argc) { - if ((infile = fopen(argv[argn], READ_BINARY)) == NULL) { - fprintf(stderr, "%s: can't open %s\n", progname, argv[argn]); - exit(EXIT_FAILURE); - } - } else { - /* default input file is stdin */ -#ifdef USE_SETMODE /* need to hack file mode? */ - setmode(fileno(stdin), O_BINARY); -#endif -#ifdef USE_FDOPEN /* need to re-open in binary mode? */ - if ((infile = fdopen(fileno(stdin), READ_BINARY)) == NULL) { - fprintf(stderr, "%s: can't open stdin\n", progname); - exit(EXIT_FAILURE); - } -#else - infile = stdin; -#endif - } - - /* Scan the JPEG headers. */ - (void) scan_JPEG_header(verbose, raw); - - /* All done. */ - exit(EXIT_SUCCESS); - return 0; /* suppress no-return-value warnings */ -} diff --git a/jpeg/rdppm.c b/jpeg/rdppm.c deleted file mode 100755 index a757022..0000000 --- a/jpeg/rdppm.c +++ /dev/null @@ -1,459 +0,0 @@ -/* - * rdppm.c - * - * Copyright (C) 1991-1997, Thomas G. Lane. - * Modified 2009 by Bill Allombert, Guido Vollbeding. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains routines to read input images in PPM/PGM format. - * The extended 2-byte-per-sample raw PPM/PGM formats are supported. - * The PBMPLUS library is NOT required to compile this software - * (but it is highly useful as a set of PPM image manipulation programs). - * - * These routines may need modification for non-Unix environments or - * specialized applications. As they stand, they assume input from - * an ordinary stdio stream. They further assume that reading begins - * at the start of the file; start_input may need work if the - * user interface has already read some data (e.g., to determine that - * the file is indeed PPM format). - */ - -#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ - -#ifdef PPM_SUPPORTED - - -/* Portions of this code are based on the PBMPLUS library, which is: -** -** Copyright (C) 1988 by Jef Poskanzer. -** -** Permission to use, copy, modify, and distribute this software and its -** documentation for any purpose and without fee is hereby granted, provided -** that the above copyright notice appear in all copies and that both that -** copyright notice and this permission notice appear in supporting -** documentation. This software is provided "as is" without express or -** implied warranty. -*/ - - -/* Macros to deal with unsigned chars as efficiently as compiler allows */ - -#ifdef HAVE_UNSIGNED_CHAR -typedef unsigned char U_CHAR; -#define UCH(x) ((int) (x)) -#else /* !HAVE_UNSIGNED_CHAR */ -#ifdef CHAR_IS_UNSIGNED -typedef char U_CHAR; -#define UCH(x) ((int) (x)) -#else -typedef char U_CHAR; -#define UCH(x) ((int) (x) & 0xFF) -#endif -#endif /* HAVE_UNSIGNED_CHAR */ - - -#define ReadOK(file,buffer,len) (JFREAD(file,buffer,len) == ((size_t) (len))) - - -/* - * On most systems, reading individual bytes with getc() is drastically less - * efficient than buffering a row at a time with fread(). On PCs, we must - * allocate the buffer in near data space, because we are assuming small-data - * memory model, wherein fread() can't reach far memory. If you need to - * process very wide images on a PC, you might have to compile in large-memory - * model, or else replace fread() with a getc() loop --- which will be much - * slower. - */ - - -/* Private version of data source object */ - -typedef struct { - struct cjpeg_source_struct pub; /* public fields */ - - U_CHAR *iobuffer; /* non-FAR pointer to I/O buffer */ - JSAMPROW pixrow; /* FAR pointer to same */ - size_t buffer_width; /* width of I/O buffer */ - JSAMPLE *rescale; /* => maxval-remapping array, or NULL */ -} ppm_source_struct; - -typedef ppm_source_struct * ppm_source_ptr; - - -LOCAL(int) -pbm_getc (FILE * infile) -/* Read next char, skipping over any comments */ -/* A comment/newline sequence is returned as a newline */ -{ - register int ch; - - ch = getc(infile); - if (ch == '#') { - do { - ch = getc(infile); - } while (ch != '\n' && ch != EOF); - } - return ch; -} - - -LOCAL(unsigned int) -read_pbm_integer (j_compress_ptr cinfo, FILE * infile) -/* Read an unsigned decimal integer from the PPM file */ -/* Swallows one trailing character after the integer */ -/* Note that on a 16-bit-int machine, only values up to 64k can be read. */ -/* This should not be a problem in practice. */ -{ - register int ch; - register unsigned int val; - - /* Skip any leading whitespace */ - do { - ch = pbm_getc(infile); - if (ch == EOF) - ERREXIT(cinfo, JERR_INPUT_EOF); - } while (ch == ' ' || ch == '\t' || ch == '\n' || ch == '\r'); - - if (ch < '0' || ch > '9') - ERREXIT(cinfo, JERR_PPM_NONNUMERIC); - - val = ch - '0'; - while ((ch = pbm_getc(infile)) >= '0' && ch <= '9') { - val *= 10; - val += ch - '0'; - } - return val; -} - - -/* - * Read one row of pixels. - * - * We provide several different versions depending on input file format. - * In all cases, input is scaled to the size of JSAMPLE. - * - * A really fast path is provided for reading byte/sample raw files with - * maxval = MAXJSAMPLE, which is the normal case for 8-bit data. - */ - - -METHODDEF(JDIMENSION) -get_text_gray_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) -/* This version is for reading text-format PGM files with any maxval */ -{ - ppm_source_ptr source = (ppm_source_ptr) sinfo; - FILE * infile = source->pub.input_file; - register JSAMPROW ptr; - register JSAMPLE *rescale = source->rescale; - JDIMENSION col; - - ptr = source->pub.buffer[0]; - for (col = cinfo->image_width; col > 0; col--) { - *ptr++ = rescale[read_pbm_integer(cinfo, infile)]; - } - return 1; -} - - -METHODDEF(JDIMENSION) -get_text_rgb_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) -/* This version is for reading text-format PPM files with any maxval */ -{ - ppm_source_ptr source = (ppm_source_ptr) sinfo; - FILE * infile = source->pub.input_file; - register JSAMPROW ptr; - register JSAMPLE *rescale = source->rescale; - JDIMENSION col; - - ptr = source->pub.buffer[0]; - for (col = cinfo->image_width; col > 0; col--) { - *ptr++ = rescale[read_pbm_integer(cinfo, infile)]; - *ptr++ = rescale[read_pbm_integer(cinfo, infile)]; - *ptr++ = rescale[read_pbm_integer(cinfo, infile)]; - } - return 1; -} - - -METHODDEF(JDIMENSION) -get_scaled_gray_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) -/* This version is for reading raw-byte-format PGM files with any maxval */ -{ - ppm_source_ptr source = (ppm_source_ptr) sinfo; - register JSAMPROW ptr; - register U_CHAR * bufferptr; - register JSAMPLE *rescale = source->rescale; - JDIMENSION col; - - if (! ReadOK(source->pub.input_file, source->iobuffer, source->buffer_width)) - ERREXIT(cinfo, JERR_INPUT_EOF); - ptr = source->pub.buffer[0]; - bufferptr = source->iobuffer; - for (col = cinfo->image_width; col > 0; col--) { - *ptr++ = rescale[UCH(*bufferptr++)]; - } - return 1; -} - - -METHODDEF(JDIMENSION) -get_scaled_rgb_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) -/* This version is for reading raw-byte-format PPM files with any maxval */ -{ - ppm_source_ptr source = (ppm_source_ptr) sinfo; - register JSAMPROW ptr; - register U_CHAR * bufferptr; - register JSAMPLE *rescale = source->rescale; - JDIMENSION col; - - if (! ReadOK(source->pub.input_file, source->iobuffer, source->buffer_width)) - ERREXIT(cinfo, JERR_INPUT_EOF); - ptr = source->pub.buffer[0]; - bufferptr = source->iobuffer; - for (col = cinfo->image_width; col > 0; col--) { - *ptr++ = rescale[UCH(*bufferptr++)]; - *ptr++ = rescale[UCH(*bufferptr++)]; - *ptr++ = rescale[UCH(*bufferptr++)]; - } - return 1; -} - - -METHODDEF(JDIMENSION) -get_raw_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) -/* This version is for reading raw-byte-format files with maxval = MAXJSAMPLE. - * In this case we just read right into the JSAMPLE buffer! - * Note that same code works for PPM and PGM files. - */ -{ - ppm_source_ptr source = (ppm_source_ptr) sinfo; - - if (! ReadOK(source->pub.input_file, source->iobuffer, source->buffer_width)) - ERREXIT(cinfo, JERR_INPUT_EOF); - return 1; -} - - -METHODDEF(JDIMENSION) -get_word_gray_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) -/* This version is for reading raw-word-format PGM files with any maxval */ -{ - ppm_source_ptr source = (ppm_source_ptr) sinfo; - register JSAMPROW ptr; - register U_CHAR * bufferptr; - register JSAMPLE *rescale = source->rescale; - JDIMENSION col; - - if (! ReadOK(source->pub.input_file, source->iobuffer, source->buffer_width)) - ERREXIT(cinfo, JERR_INPUT_EOF); - ptr = source->pub.buffer[0]; - bufferptr = source->iobuffer; - for (col = cinfo->image_width; col > 0; col--) { - register int temp; - temp = UCH(*bufferptr++) << 8; - temp |= UCH(*bufferptr++); - *ptr++ = rescale[temp]; - } - return 1; -} - - -METHODDEF(JDIMENSION) -get_word_rgb_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) -/* This version is for reading raw-word-format PPM files with any maxval */ -{ - ppm_source_ptr source = (ppm_source_ptr) sinfo; - register JSAMPROW ptr; - register U_CHAR * bufferptr; - register JSAMPLE *rescale = source->rescale; - JDIMENSION col; - - if (! ReadOK(source->pub.input_file, source->iobuffer, source->buffer_width)) - ERREXIT(cinfo, JERR_INPUT_EOF); - ptr = source->pub.buffer[0]; - bufferptr = source->iobuffer; - for (col = cinfo->image_width; col > 0; col--) { - register int temp; - temp = UCH(*bufferptr++) << 8; - temp |= UCH(*bufferptr++); - *ptr++ = rescale[temp]; - temp = UCH(*bufferptr++) << 8; - temp |= UCH(*bufferptr++); - *ptr++ = rescale[temp]; - temp = UCH(*bufferptr++) << 8; - temp |= UCH(*bufferptr++); - *ptr++ = rescale[temp]; - } - return 1; -} - - -/* - * Read the file header; return image size and component count. - */ - -METHODDEF(void) -start_input_ppm (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) -{ - ppm_source_ptr source = (ppm_source_ptr) sinfo; - int c; - unsigned int w, h, maxval; - boolean need_iobuffer, use_raw_buffer, need_rescale; - - if (getc(source->pub.input_file) != 'P') - ERREXIT(cinfo, JERR_PPM_NOT); - - c = getc(source->pub.input_file); /* subformat discriminator character */ - - /* detect unsupported variants (ie, PBM) before trying to read header */ - switch (c) { - case '2': /* it's a text-format PGM file */ - case '3': /* it's a text-format PPM file */ - case '5': /* it's a raw-format PGM file */ - case '6': /* it's a raw-format PPM file */ - break; - default: - ERREXIT(cinfo, JERR_PPM_NOT); - break; - } - - /* fetch the remaining header info */ - w = read_pbm_integer(cinfo, source->pub.input_file); - h = read_pbm_integer(cinfo, source->pub.input_file); - maxval = read_pbm_integer(cinfo, source->pub.input_file); - - if (w <= 0 || h <= 0 || maxval <= 0) /* error check */ - ERREXIT(cinfo, JERR_PPM_NOT); - - cinfo->data_precision = BITS_IN_JSAMPLE; /* we always rescale data to this */ - cinfo->image_width = (JDIMENSION) w; - cinfo->image_height = (JDIMENSION) h; - - /* initialize flags to most common settings */ - need_iobuffer = TRUE; /* do we need an I/O buffer? */ - use_raw_buffer = FALSE; /* do we map input buffer onto I/O buffer? */ - need_rescale = TRUE; /* do we need a rescale array? */ - - switch (c) { - case '2': /* it's a text-format PGM file */ - cinfo->input_components = 1; - cinfo->in_color_space = JCS_GRAYSCALE; - TRACEMS2(cinfo, 1, JTRC_PGM_TEXT, w, h); - source->pub.get_pixel_rows = get_text_gray_row; - need_iobuffer = FALSE; - break; - - case '3': /* it's a text-format PPM file */ - cinfo->input_components = 3; - cinfo->in_color_space = JCS_RGB; - TRACEMS2(cinfo, 1, JTRC_PPM_TEXT, w, h); - source->pub.get_pixel_rows = get_text_rgb_row; - need_iobuffer = FALSE; - break; - - case '5': /* it's a raw-format PGM file */ - cinfo->input_components = 1; - cinfo->in_color_space = JCS_GRAYSCALE; - TRACEMS2(cinfo, 1, JTRC_PGM, w, h); - if (maxval > 255) { - source->pub.get_pixel_rows = get_word_gray_row; - } else if (maxval == MAXJSAMPLE && SIZEOF(JSAMPLE) == SIZEOF(U_CHAR)) { - source->pub.get_pixel_rows = get_raw_row; - use_raw_buffer = TRUE; - need_rescale = FALSE; - } else { - source->pub.get_pixel_rows = get_scaled_gray_row; - } - break; - - case '6': /* it's a raw-format PPM file */ - cinfo->input_components = 3; - cinfo->in_color_space = JCS_RGB; - TRACEMS2(cinfo, 1, JTRC_PPM, w, h); - if (maxval > 255) { - source->pub.get_pixel_rows = get_word_rgb_row; - } else if (maxval == MAXJSAMPLE && SIZEOF(JSAMPLE) == SIZEOF(U_CHAR)) { - source->pub.get_pixel_rows = get_raw_row; - use_raw_buffer = TRUE; - need_rescale = FALSE; - } else { - source->pub.get_pixel_rows = get_scaled_rgb_row; - } - break; - } - - /* Allocate space for I/O buffer: 1 or 3 bytes or words/pixel. */ - if (need_iobuffer) { - source->buffer_width = (size_t) w * cinfo->input_components * - ((maxval<=255) ? SIZEOF(U_CHAR) : (2*SIZEOF(U_CHAR))); - source->iobuffer = (U_CHAR *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - source->buffer_width); - } - - /* Create compressor input buffer. */ - if (use_raw_buffer) { - /* For unscaled raw-input case, we can just map it onto the I/O buffer. */ - /* Synthesize a JSAMPARRAY pointer structure */ - /* Cast here implies near->far pointer conversion on PCs */ - source->pixrow = (JSAMPROW) source->iobuffer; - source->pub.buffer = & source->pixrow; - source->pub.buffer_height = 1; - } else { - /* Need to translate anyway, so make a separate sample buffer. */ - source->pub.buffer = (*cinfo->mem->alloc_sarray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, - (JDIMENSION) w * cinfo->input_components, (JDIMENSION) 1); - source->pub.buffer_height = 1; - } - - /* Compute the rescaling array if required. */ - if (need_rescale) { - INT32 val, half_maxval; - - /* On 16-bit-int machines we have to be careful of maxval = 65535 */ - source->rescale = (JSAMPLE *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - (size_t) (((long) maxval + 1L) * SIZEOF(JSAMPLE))); - half_maxval = maxval / 2; - for (val = 0; val <= (INT32) maxval; val++) { - /* The multiplication here must be done in 32 bits to avoid overflow */ - source->rescale[val] = (JSAMPLE) ((val*MAXJSAMPLE + half_maxval)/maxval); - } - } -} - - -/* - * Finish up at the end of the file. - */ - -METHODDEF(void) -finish_input_ppm (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) -{ - /* no work */ -} - - -/* - * The module selection routine for PPM format input. - */ - -GLOBAL(cjpeg_source_ptr) -jinit_read_ppm (j_compress_ptr cinfo) -{ - ppm_source_ptr source; - - /* Create module interface object */ - source = (ppm_source_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(ppm_source_struct)); - /* Fill in method ptrs, except get_pixel_rows which start_input sets */ - source->pub.start_input = start_input_ppm; - source->pub.finish_input = finish_input_ppm; - - return (cjpeg_source_ptr) source; -} - -#endif /* PPM_SUPPORTED */ diff --git a/jpeg/rdrle.c b/jpeg/rdrle.c deleted file mode 100755 index 542bc37..0000000 --- a/jpeg/rdrle.c +++ /dev/null @@ -1,387 +0,0 @@ -/* - * rdrle.c - * - * Copyright (C) 1991-1996, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains routines to read input images in Utah RLE format. - * The Utah Raster Toolkit library is required (version 3.1 or later). - * - * These routines may need modification for non-Unix environments or - * specialized applications. As they stand, they assume input from - * an ordinary stdio stream. They further assume that reading begins - * at the start of the file; start_input may need work if the - * user interface has already read some data (e.g., to determine that - * the file is indeed RLE format). - * - * Based on code contributed by Mike Lijewski, - * with updates from Robert Hutchinson. - */ - -#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ - -#ifdef RLE_SUPPORTED - -/* rle.h is provided by the Utah Raster Toolkit. */ - -#include - -/* - * We assume that JSAMPLE has the same representation as rle_pixel, - * to wit, "unsigned char". Hence we can't cope with 12- or 16-bit samples. - */ - -#if BITS_IN_JSAMPLE != 8 - Sorry, this code only copes with 8-bit JSAMPLEs. /* deliberate syntax err */ -#endif - -/* - * We support the following types of RLE files: - * - * GRAYSCALE - 8 bits, no colormap - * MAPPEDGRAY - 8 bits, 1 channel colomap - * PSEUDOCOLOR - 8 bits, 3 channel colormap - * TRUECOLOR - 24 bits, 3 channel colormap - * DIRECTCOLOR - 24 bits, no colormap - * - * For now, we ignore any alpha channel in the image. - */ - -typedef enum - { GRAYSCALE, MAPPEDGRAY, PSEUDOCOLOR, TRUECOLOR, DIRECTCOLOR } rle_kind; - - -/* - * Since RLE stores scanlines bottom-to-top, we have to invert the image - * to conform to JPEG's top-to-bottom order. To do this, we read the - * incoming image into a virtual array on the first get_pixel_rows call, - * then fetch the required row from the virtual array on subsequent calls. - */ - -typedef struct _rle_source_struct * rle_source_ptr; - -typedef struct _rle_source_struct { - struct cjpeg_source_struct pub; /* public fields */ - - rle_kind visual; /* actual type of input file */ - jvirt_sarray_ptr image; /* virtual array to hold the image */ - JDIMENSION row; /* current row # in the virtual array */ - rle_hdr header; /* Input file information */ - rle_pixel** rle_row; /* holds a row returned by rle_getrow() */ - -} rle_source_struct; - - -/* - * Read the file header; return image size and component count. - */ - -METHODDEF(void) -start_input_rle (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) -{ - rle_source_ptr source = (rle_source_ptr) sinfo; - JDIMENSION width, height; -#ifdef PROGRESS_REPORT - cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress; -#endif - - /* Use RLE library routine to get the header info */ - source->header = *rle_hdr_init(NULL); - source->header.rle_file = source->pub.input_file; - switch (rle_get_setup(&(source->header))) { - case RLE_SUCCESS: - /* A-OK */ - break; - case RLE_NOT_RLE: - ERREXIT(cinfo, JERR_RLE_NOT); - break; - case RLE_NO_SPACE: - ERREXIT(cinfo, JERR_RLE_MEM); - break; - case RLE_EMPTY: - ERREXIT(cinfo, JERR_RLE_EMPTY); - break; - case RLE_EOF: - ERREXIT(cinfo, JERR_RLE_EOF); - break; - default: - ERREXIT(cinfo, JERR_RLE_BADERROR); - break; - } - - /* Figure out what we have, set private vars and return values accordingly */ - - width = source->header.xmax - source->header.xmin + 1; - height = source->header.ymax - source->header.ymin + 1; - source->header.xmin = 0; /* realign horizontally */ - source->header.xmax = width-1; - - cinfo->image_width = width; - cinfo->image_height = height; - cinfo->data_precision = 8; /* we can only handle 8 bit data */ - - if (source->header.ncolors == 1 && source->header.ncmap == 0) { - source->visual = GRAYSCALE; - TRACEMS2(cinfo, 1, JTRC_RLE_GRAY, width, height); - } else if (source->header.ncolors == 1 && source->header.ncmap == 1) { - source->visual = MAPPEDGRAY; - TRACEMS3(cinfo, 1, JTRC_RLE_MAPGRAY, width, height, - 1 << source->header.cmaplen); - } else if (source->header.ncolors == 1 && source->header.ncmap == 3) { - source->visual = PSEUDOCOLOR; - TRACEMS3(cinfo, 1, JTRC_RLE_MAPPED, width, height, - 1 << source->header.cmaplen); - } else if (source->header.ncolors == 3 && source->header.ncmap == 3) { - source->visual = TRUECOLOR; - TRACEMS3(cinfo, 1, JTRC_RLE_FULLMAP, width, height, - 1 << source->header.cmaplen); - } else if (source->header.ncolors == 3 && source->header.ncmap == 0) { - source->visual = DIRECTCOLOR; - TRACEMS2(cinfo, 1, JTRC_RLE, width, height); - } else - ERREXIT(cinfo, JERR_RLE_UNSUPPORTED); - - if (source->visual == GRAYSCALE || source->visual == MAPPEDGRAY) { - cinfo->in_color_space = JCS_GRAYSCALE; - cinfo->input_components = 1; - } else { - cinfo->in_color_space = JCS_RGB; - cinfo->input_components = 3; - } - - /* - * A place to hold each scanline while it's converted. - * (GRAYSCALE scanlines don't need converting) - */ - if (source->visual != GRAYSCALE) { - source->rle_row = (rle_pixel**) (*cinfo->mem->alloc_sarray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, - (JDIMENSION) width, (JDIMENSION) cinfo->input_components); - } - - /* request a virtual array to hold the image */ - source->image = (*cinfo->mem->request_virt_sarray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE, - (JDIMENSION) (width * source->header.ncolors), - (JDIMENSION) height, (JDIMENSION) 1); - -#ifdef PROGRESS_REPORT - if (progress != NULL) { - /* count file input as separate pass */ - progress->total_extra_passes++; - } -#endif - - source->pub.buffer_height = 1; -} - - -/* - * Read one row of pixels. - * Called only after load_image has read the image into the virtual array. - * Used for GRAYSCALE, MAPPEDGRAY, TRUECOLOR, and DIRECTCOLOR images. - */ - -METHODDEF(JDIMENSION) -get_rle_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) -{ - rle_source_ptr source = (rle_source_ptr) sinfo; - - source->row--; - source->pub.buffer = (*cinfo->mem->access_virt_sarray) - ((j_common_ptr) cinfo, source->image, source->row, (JDIMENSION) 1, FALSE); - - return 1; -} - -/* - * Read one row of pixels. - * Called only after load_image has read the image into the virtual array. - * Used for PSEUDOCOLOR images. - */ - -METHODDEF(JDIMENSION) -get_pseudocolor_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) -{ - rle_source_ptr source = (rle_source_ptr) sinfo; - JSAMPROW src_row, dest_row; - JDIMENSION col; - rle_map *colormap; - int val; - - colormap = source->header.cmap; - dest_row = source->pub.buffer[0]; - source->row--; - src_row = * (*cinfo->mem->access_virt_sarray) - ((j_common_ptr) cinfo, source->image, source->row, (JDIMENSION) 1, FALSE); - - for (col = cinfo->image_width; col > 0; col--) { - val = GETJSAMPLE(*src_row++); - *dest_row++ = (JSAMPLE) (colormap[val ] >> 8); - *dest_row++ = (JSAMPLE) (colormap[val + 256] >> 8); - *dest_row++ = (JSAMPLE) (colormap[val + 512] >> 8); - } - - return 1; -} - - -/* - * Load the image into a virtual array. We have to do this because RLE - * files start at the lower left while the JPEG standard has them starting - * in the upper left. This is called the first time we want to get a row - * of input. What we do is load the RLE data into the array and then call - * the appropriate routine to read one row from the array. Before returning, - * we set source->pub.get_pixel_rows so that subsequent calls go straight to - * the appropriate row-reading routine. - */ - -METHODDEF(JDIMENSION) -load_image (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) -{ - rle_source_ptr source = (rle_source_ptr) sinfo; - JDIMENSION row, col; - JSAMPROW scanline, red_ptr, green_ptr, blue_ptr; - rle_pixel **rle_row; - rle_map *colormap; - char channel; -#ifdef PROGRESS_REPORT - cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress; -#endif - - colormap = source->header.cmap; - rle_row = source->rle_row; - - /* Read the RLE data into our virtual array. - * We assume here that (a) rle_pixel is represented the same as JSAMPLE, - * and (b) we are not on a machine where FAR pointers differ from regular. - */ - RLE_CLR_BIT(source->header, RLE_ALPHA); /* don't read the alpha channel */ - -#ifdef PROGRESS_REPORT - if (progress != NULL) { - progress->pub.pass_limit = cinfo->image_height; - progress->pub.pass_counter = 0; - (*progress->pub.progress_monitor) ((j_common_ptr) cinfo); - } -#endif - - switch (source->visual) { - - case GRAYSCALE: - case PSEUDOCOLOR: - for (row = 0; row < cinfo->image_height; row++) { - rle_row = (rle_pixel **) (*cinfo->mem->access_virt_sarray) - ((j_common_ptr) cinfo, source->image, row, (JDIMENSION) 1, TRUE); - rle_getrow(&source->header, rle_row); -#ifdef PROGRESS_REPORT - if (progress != NULL) { - progress->pub.pass_counter++; - (*progress->pub.progress_monitor) ((j_common_ptr) cinfo); - } -#endif - } - break; - - case MAPPEDGRAY: - case TRUECOLOR: - for (row = 0; row < cinfo->image_height; row++) { - scanline = * (*cinfo->mem->access_virt_sarray) - ((j_common_ptr) cinfo, source->image, row, (JDIMENSION) 1, TRUE); - rle_row = source->rle_row; - rle_getrow(&source->header, rle_row); - - for (col = 0; col < cinfo->image_width; col++) { - for (channel = 0; channel < source->header.ncolors; channel++) { - *scanline++ = (JSAMPLE) - (colormap[GETJSAMPLE(rle_row[channel][col]) + 256 * channel] >> 8); - } - } - -#ifdef PROGRESS_REPORT - if (progress != NULL) { - progress->pub.pass_counter++; - (*progress->pub.progress_monitor) ((j_common_ptr) cinfo); - } -#endif - } - break; - - case DIRECTCOLOR: - for (row = 0; row < cinfo->image_height; row++) { - scanline = * (*cinfo->mem->access_virt_sarray) - ((j_common_ptr) cinfo, source->image, row, (JDIMENSION) 1, TRUE); - rle_getrow(&source->header, rle_row); - - red_ptr = rle_row[0]; - green_ptr = rle_row[1]; - blue_ptr = rle_row[2]; - - for (col = cinfo->image_width; col > 0; col--) { - *scanline++ = *red_ptr++; - *scanline++ = *green_ptr++; - *scanline++ = *blue_ptr++; - } - -#ifdef PROGRESS_REPORT - if (progress != NULL) { - progress->pub.pass_counter++; - (*progress->pub.progress_monitor) ((j_common_ptr) cinfo); - } -#endif - } - } - -#ifdef PROGRESS_REPORT - if (progress != NULL) - progress->completed_extra_passes++; -#endif - - /* Set up to call proper row-extraction routine in future */ - if (source->visual == PSEUDOCOLOR) { - source->pub.buffer = source->rle_row; - source->pub.get_pixel_rows = get_pseudocolor_row; - } else { - source->pub.get_pixel_rows = get_rle_row; - } - source->row = cinfo->image_height; - - /* And fetch the topmost (bottommost) row */ - return (*source->pub.get_pixel_rows) (cinfo, sinfo); -} - - -/* - * Finish up at the end of the file. - */ - -METHODDEF(void) -finish_input_rle (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) -{ - /* no work */ -} - - -/* - * The module selection routine for RLE format input. - */ - -GLOBAL(cjpeg_source_ptr) -jinit_read_rle (j_compress_ptr cinfo) -{ - rle_source_ptr source; - - /* Create module interface object */ - source = (rle_source_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(rle_source_struct)); - /* Fill in method ptrs */ - source->pub.start_input = start_input_rle; - source->pub.finish_input = finish_input_rle; - source->pub.get_pixel_rows = load_image; - - return (cjpeg_source_ptr) source; -} - -#endif /* RLE_SUPPORTED */ diff --git a/jpeg/rdswitch.c b/jpeg/rdswitch.c deleted file mode 100755 index 7a839af..0000000 --- a/jpeg/rdswitch.c +++ /dev/null @@ -1,365 +0,0 @@ -/* - * rdswitch.c - * - * Copyright (C) 1991-1996, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains routines to process some of cjpeg's more complicated - * command-line switches. Switches processed here are: - * -qtables file Read quantization tables from text file - * -scans file Read scan script from text file - * -quality N[,N,...] Set quality ratings - * -qslots N[,N,...] Set component quantization table selectors - * -sample HxV[,HxV,...] Set component sampling factors - */ - -#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ -#include /* to declare isdigit(), isspace() */ - - -LOCAL(int) -text_getc (FILE * file) -/* Read next char, skipping over any comments (# to end of line) */ -/* A comment/newline sequence is returned as a newline */ -{ - register int ch; - - ch = getc(file); - if (ch == '#') { - do { - ch = getc(file); - } while (ch != '\n' && ch != EOF); - } - return ch; -} - - -LOCAL(boolean) -read_text_integer (FILE * file, long * result, int * termchar) -/* Read an unsigned decimal integer from a file, store it in result */ -/* Reads one trailing character after the integer; returns it in termchar */ -{ - register int ch; - register long val; - - /* Skip any leading whitespace, detect EOF */ - do { - ch = text_getc(file); - if (ch == EOF) { - *termchar = ch; - return FALSE; - } - } while (isspace(ch)); - - if (! isdigit(ch)) { - *termchar = ch; - return FALSE; - } - - val = ch - '0'; - while ((ch = text_getc(file)) != EOF) { - if (! isdigit(ch)) - break; - val *= 10; - val += ch - '0'; - } - *result = val; - *termchar = ch; - return TRUE; -} - - -GLOBAL(boolean) -read_quant_tables (j_compress_ptr cinfo, char * filename, boolean force_baseline) -/* Read a set of quantization tables from the specified file. - * The file is plain ASCII text: decimal numbers with whitespace between. - * Comments preceded by '#' may be included in the file. - * There may be one to NUM_QUANT_TBLS tables in the file, each of 64 values. - * The tables are implicitly numbered 0,1,etc. - * NOTE: does not affect the qslots mapping, which will default to selecting - * table 0 for luminance (or primary) components, 1 for chrominance components. - * You must use -qslots if you want a different component->table mapping. - */ -{ - FILE * fp; - int tblno, i, termchar; - long val; - unsigned int table[DCTSIZE2]; - - if ((fp = fopen(filename, "r")) == NULL) { - fprintf(stderr, "Can't open table file %s\n", filename); - return FALSE; - } - tblno = 0; - - while (read_text_integer(fp, &val, &termchar)) { /* read 1st element of table */ - if (tblno >= NUM_QUANT_TBLS) { - fprintf(stderr, "Too many tables in file %s\n", filename); - fclose(fp); - return FALSE; - } - table[0] = (unsigned int) val; - for (i = 1; i < DCTSIZE2; i++) { - if (! read_text_integer(fp, &val, &termchar)) { - fprintf(stderr, "Invalid table data in file %s\n", filename); - fclose(fp); - return FALSE; - } - table[i] = (unsigned int) val; - } - jpeg_add_quant_table(cinfo, tblno, table, cinfo->q_scale_factor[tblno], - force_baseline); - tblno++; - } - - if (termchar != EOF) { - fprintf(stderr, "Non-numeric data in file %s\n", filename); - fclose(fp); - return FALSE; - } - - fclose(fp); - return TRUE; -} - - -#ifdef C_MULTISCAN_FILES_SUPPORTED - -LOCAL(boolean) -read_scan_integer (FILE * file, long * result, int * termchar) -/* Variant of read_text_integer that always looks for a non-space termchar; - * this simplifies parsing of punctuation in scan scripts. - */ -{ - register int ch; - - if (! read_text_integer(file, result, termchar)) - return FALSE; - ch = *termchar; - while (ch != EOF && isspace(ch)) - ch = text_getc(file); - if (isdigit(ch)) { /* oops, put it back */ - if (ungetc(ch, file) == EOF) - return FALSE; - ch = ' '; - } else { - /* Any separators other than ';' and ':' are ignored; - * this allows user to insert commas, etc, if desired. - */ - if (ch != EOF && ch != ';' && ch != ':') - ch = ' '; - } - *termchar = ch; - return TRUE; -} - - -GLOBAL(boolean) -read_scan_script (j_compress_ptr cinfo, char * filename) -/* Read a scan script from the specified text file. - * Each entry in the file defines one scan to be emitted. - * Entries are separated by semicolons ';'. - * An entry contains one to four component indexes, - * optionally followed by a colon ':' and four progressive-JPEG parameters. - * The component indexes denote which component(s) are to be transmitted - * in the current scan. The first component has index 0. - * Sequential JPEG is used if the progressive-JPEG parameters are omitted. - * The file is free format text: any whitespace may appear between numbers - * and the ':' and ';' punctuation marks. Also, other punctuation (such - * as commas or dashes) can be placed between numbers if desired. - * Comments preceded by '#' may be included in the file. - * Note: we do very little validity checking here; - * jcmaster.c will validate the script parameters. - */ -{ - FILE * fp; - int scanno, ncomps, termchar; - long val; - jpeg_scan_info * scanptr; -#define MAX_SCANS 100 /* quite arbitrary limit */ - jpeg_scan_info scans[MAX_SCANS]; - - if ((fp = fopen(filename, "r")) == NULL) { - fprintf(stderr, "Can't open scan definition file %s\n", filename); - return FALSE; - } - scanptr = scans; - scanno = 0; - - while (read_scan_integer(fp, &val, &termchar)) { - if (scanno >= MAX_SCANS) { - fprintf(stderr, "Too many scans defined in file %s\n", filename); - fclose(fp); - return FALSE; - } - scanptr->component_index[0] = (int) val; - ncomps = 1; - while (termchar == ' ') { - if (ncomps >= MAX_COMPS_IN_SCAN) { - fprintf(stderr, "Too many components in one scan in file %s\n", - filename); - fclose(fp); - return FALSE; - } - if (! read_scan_integer(fp, &val, &termchar)) - goto bogus; - scanptr->component_index[ncomps] = (int) val; - ncomps++; - } - scanptr->comps_in_scan = ncomps; - if (termchar == ':') { - if (! read_scan_integer(fp, &val, &termchar) || termchar != ' ') - goto bogus; - scanptr->Ss = (int) val; - if (! read_scan_integer(fp, &val, &termchar) || termchar != ' ') - goto bogus; - scanptr->Se = (int) val; - if (! read_scan_integer(fp, &val, &termchar) || termchar != ' ') - goto bogus; - scanptr->Ah = (int) val; - if (! read_scan_integer(fp, &val, &termchar)) - goto bogus; - scanptr->Al = (int) val; - } else { - /* set non-progressive parameters */ - scanptr->Ss = 0; - scanptr->Se = DCTSIZE2-1; - scanptr->Ah = 0; - scanptr->Al = 0; - } - if (termchar != ';' && termchar != EOF) { -bogus: - fprintf(stderr, "Invalid scan entry format in file %s\n", filename); - fclose(fp); - return FALSE; - } - scanptr++, scanno++; - } - - if (termchar != EOF) { - fprintf(stderr, "Non-numeric data in file %s\n", filename); - fclose(fp); - return FALSE; - } - - if (scanno > 0) { - /* Stash completed scan list in cinfo structure. - * NOTE: for cjpeg's use, JPOOL_IMAGE is the right lifetime for this data, - * but if you want to compress multiple images you'd want JPOOL_PERMANENT. - */ - scanptr = (jpeg_scan_info *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - scanno * SIZEOF(jpeg_scan_info)); - MEMCOPY(scanptr, scans, scanno * SIZEOF(jpeg_scan_info)); - cinfo->scan_info = scanptr; - cinfo->num_scans = scanno; - } - - fclose(fp); - return TRUE; -} - -#endif /* C_MULTISCAN_FILES_SUPPORTED */ - - -GLOBAL(boolean) -set_quality_ratings (j_compress_ptr cinfo, char *arg, boolean force_baseline) -/* Process a quality-ratings parameter string, of the form - * N[,N,...] - * If there are more q-table slots than parameters, the last value is replicated. - */ -{ - int val = 75; /* default value */ - int tblno; - char ch; - - for (tblno = 0; tblno < NUM_QUANT_TBLS; tblno++) { - if (*arg) { - ch = ','; /* if not set by sscanf, will be ',' */ - if (sscanf(arg, "%d%c", &val, &ch) < 1) - return FALSE; - if (ch != ',') /* syntax check */ - return FALSE; - /* Convert user 0-100 rating to percentage scaling */ - cinfo->q_scale_factor[tblno] = jpeg_quality_scaling(val); - while (*arg && *arg++ != ',') /* advance to next segment of arg string */ - ; - } else { - /* reached end of parameter, set remaining factors to last value */ - cinfo->q_scale_factor[tblno] = jpeg_quality_scaling(val); - } - } - jpeg_default_qtables(cinfo, force_baseline); - return TRUE; -} - - -GLOBAL(boolean) -set_quant_slots (j_compress_ptr cinfo, char *arg) -/* Process a quantization-table-selectors parameter string, of the form - * N[,N,...] - * If there are more components than parameters, the last value is replicated. - */ -{ - int val = 0; /* default table # */ - int ci; - char ch; - - for (ci = 0; ci < MAX_COMPONENTS; ci++) { - if (*arg) { - ch = ','; /* if not set by sscanf, will be ',' */ - if (sscanf(arg, "%d%c", &val, &ch) < 1) - return FALSE; - if (ch != ',') /* syntax check */ - return FALSE; - if (val < 0 || val >= NUM_QUANT_TBLS) { - fprintf(stderr, "JPEG quantization tables are numbered 0..%d\n", - NUM_QUANT_TBLS-1); - return FALSE; - } - cinfo->comp_info[ci].quant_tbl_no = val; - while (*arg && *arg++ != ',') /* advance to next segment of arg string */ - ; - } else { - /* reached end of parameter, set remaining components to last table */ - cinfo->comp_info[ci].quant_tbl_no = val; - } - } - return TRUE; -} - - -GLOBAL(boolean) -set_sample_factors (j_compress_ptr cinfo, char *arg) -/* Process a sample-factors parameter string, of the form - * HxV[,HxV,...] - * If there are more components than parameters, "1x1" is assumed for the rest. - */ -{ - int ci, val1, val2; - char ch1, ch2; - - for (ci = 0; ci < MAX_COMPONENTS; ci++) { - if (*arg) { - ch2 = ','; /* if not set by sscanf, will be ',' */ - if (sscanf(arg, "%d%c%d%c", &val1, &ch1, &val2, &ch2) < 3) - return FALSE; - if ((ch1 != 'x' && ch1 != 'X') || ch2 != ',') /* syntax check */ - return FALSE; - if (val1 <= 0 || val1 > 4 || val2 <= 0 || val2 > 4) { - fprintf(stderr, "JPEG sampling factors must be 1..4\n"); - return FALSE; - } - cinfo->comp_info[ci].h_samp_factor = val1; - cinfo->comp_info[ci].v_samp_factor = val2; - while (*arg && *arg++ != ',') /* advance to next segment of arg string */ - ; - } else { - /* reached end of parameter, set remaining components to 1x1 sampling */ - cinfo->comp_info[ci].h_samp_factor = 1; - cinfo->comp_info[ci].v_samp_factor = 1; - } - } - return TRUE; -} diff --git a/jpeg/rdtarga.c b/jpeg/rdtarga.c deleted file mode 100755 index 4c2cd26..0000000 --- a/jpeg/rdtarga.c +++ /dev/null @@ -1,500 +0,0 @@ -/* - * rdtarga.c - * - * Copyright (C) 1991-1996, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains routines to read input images in Targa format. - * - * These routines may need modification for non-Unix environments or - * specialized applications. As they stand, they assume input from - * an ordinary stdio stream. They further assume that reading begins - * at the start of the file; start_input may need work if the - * user interface has already read some data (e.g., to determine that - * the file is indeed Targa format). - * - * Based on code contributed by Lee Daniel Crocker. - */ - -#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ - -#ifdef TARGA_SUPPORTED - - -/* Macros to deal with unsigned chars as efficiently as compiler allows */ - -#ifdef HAVE_UNSIGNED_CHAR -typedef unsigned char U_CHAR; -#define UCH(x) ((int) (x)) -#else /* !HAVE_UNSIGNED_CHAR */ -#ifdef CHAR_IS_UNSIGNED -typedef char U_CHAR; -#define UCH(x) ((int) (x)) -#else -typedef char U_CHAR; -#define UCH(x) ((int) (x) & 0xFF) -#endif -#endif /* HAVE_UNSIGNED_CHAR */ - - -#define ReadOK(file,buffer,len) (JFREAD(file,buffer,len) == ((size_t) (len))) - - -/* Private version of data source object */ - -typedef struct _tga_source_struct * tga_source_ptr; - -typedef struct _tga_source_struct { - struct cjpeg_source_struct pub; /* public fields */ - - j_compress_ptr cinfo; /* back link saves passing separate parm */ - - JSAMPARRAY colormap; /* Targa colormap (converted to my format) */ - - jvirt_sarray_ptr whole_image; /* Needed if funny input row order */ - JDIMENSION current_row; /* Current logical row number to read */ - - /* Pointer to routine to extract next Targa pixel from input file */ - JMETHOD(void, read_pixel, (tga_source_ptr sinfo)); - - /* Result of read_pixel is delivered here: */ - U_CHAR tga_pixel[4]; - - int pixel_size; /* Bytes per Targa pixel (1 to 4) */ - - /* State info for reading RLE-coded pixels; both counts must be init to 0 */ - int block_count; /* # of pixels remaining in RLE block */ - int dup_pixel_count; /* # of times to duplicate previous pixel */ - - /* This saves the correct pixel-row-expansion method for preload_image */ - JMETHOD(JDIMENSION, get_pixel_rows, (j_compress_ptr cinfo, - cjpeg_source_ptr sinfo)); -} tga_source_struct; - - -/* For expanding 5-bit pixel values to 8-bit with best rounding */ - -static const UINT8 c5to8bits[32] = { - 0, 8, 16, 25, 33, 41, 49, 58, - 66, 74, 82, 90, 99, 107, 115, 123, - 132, 140, 148, 156, 165, 173, 181, 189, - 197, 206, 214, 222, 230, 239, 247, 255 -}; - - - -LOCAL(int) -read_byte (tga_source_ptr sinfo) -/* Read next byte from Targa file */ -{ - register FILE *infile = sinfo->pub.input_file; - register int c; - - if ((c = getc(infile)) == EOF) - ERREXIT(sinfo->cinfo, JERR_INPUT_EOF); - return c; -} - - -LOCAL(void) -read_colormap (tga_source_ptr sinfo, int cmaplen, int mapentrysize) -/* Read the colormap from a Targa file */ -{ - int i; - - /* Presently only handles 24-bit BGR format */ - if (mapentrysize != 24) - ERREXIT(sinfo->cinfo, JERR_TGA_BADCMAP); - - for (i = 0; i < cmaplen; i++) { - sinfo->colormap[2][i] = (JSAMPLE) read_byte(sinfo); - sinfo->colormap[1][i] = (JSAMPLE) read_byte(sinfo); - sinfo->colormap[0][i] = (JSAMPLE) read_byte(sinfo); - } -} - - -/* - * read_pixel methods: get a single pixel from Targa file into tga_pixel[] - */ - -METHODDEF(void) -read_non_rle_pixel (tga_source_ptr sinfo) -/* Read one Targa pixel from the input file; no RLE expansion */ -{ - register FILE *infile = sinfo->pub.input_file; - register int i; - - for (i = 0; i < sinfo->pixel_size; i++) { - sinfo->tga_pixel[i] = (U_CHAR) getc(infile); - } -} - - -METHODDEF(void) -read_rle_pixel (tga_source_ptr sinfo) -/* Read one Targa pixel from the input file, expanding RLE data as needed */ -{ - register FILE *infile = sinfo->pub.input_file; - register int i; - - /* Duplicate previously read pixel? */ - if (sinfo->dup_pixel_count > 0) { - sinfo->dup_pixel_count--; - return; - } - - /* Time to read RLE block header? */ - if (--sinfo->block_count < 0) { /* decrement pixels remaining in block */ - i = read_byte(sinfo); - if (i & 0x80) { /* Start of duplicate-pixel block? */ - sinfo->dup_pixel_count = i & 0x7F; /* number of dups after this one */ - sinfo->block_count = 0; /* then read new block header */ - } else { - sinfo->block_count = i & 0x7F; /* number of pixels after this one */ - } - } - - /* Read next pixel */ - for (i = 0; i < sinfo->pixel_size; i++) { - sinfo->tga_pixel[i] = (U_CHAR) getc(infile); - } -} - - -/* - * Read one row of pixels. - * - * We provide several different versions depending on input file format. - */ - - -METHODDEF(JDIMENSION) -get_8bit_gray_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) -/* This version is for reading 8-bit grayscale pixels */ -{ - tga_source_ptr source = (tga_source_ptr) sinfo; - register JSAMPROW ptr; - register JDIMENSION col; - - ptr = source->pub.buffer[0]; - for (col = cinfo->image_width; col > 0; col--) { - (*source->read_pixel) (source); /* Load next pixel into tga_pixel */ - *ptr++ = (JSAMPLE) UCH(source->tga_pixel[0]); - } - return 1; -} - -METHODDEF(JDIMENSION) -get_8bit_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) -/* This version is for reading 8-bit colormap indexes */ -{ - tga_source_ptr source = (tga_source_ptr) sinfo; - register int t; - register JSAMPROW ptr; - register JDIMENSION col; - register JSAMPARRAY colormap = source->colormap; - - ptr = source->pub.buffer[0]; - for (col = cinfo->image_width; col > 0; col--) { - (*source->read_pixel) (source); /* Load next pixel into tga_pixel */ - t = UCH(source->tga_pixel[0]); - *ptr++ = colormap[0][t]; - *ptr++ = colormap[1][t]; - *ptr++ = colormap[2][t]; - } - return 1; -} - -METHODDEF(JDIMENSION) -get_16bit_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) -/* This version is for reading 16-bit pixels */ -{ - tga_source_ptr source = (tga_source_ptr) sinfo; - register int t; - register JSAMPROW ptr; - register JDIMENSION col; - - ptr = source->pub.buffer[0]; - for (col = cinfo->image_width; col > 0; col--) { - (*source->read_pixel) (source); /* Load next pixel into tga_pixel */ - t = UCH(source->tga_pixel[0]); - t += UCH(source->tga_pixel[1]) << 8; - /* We expand 5 bit data to 8 bit sample width. - * The format of the 16-bit (LSB first) input word is - * xRRRRRGGGGGBBBBB - */ - ptr[2] = (JSAMPLE) c5to8bits[t & 0x1F]; - t >>= 5; - ptr[1] = (JSAMPLE) c5to8bits[t & 0x1F]; - t >>= 5; - ptr[0] = (JSAMPLE) c5to8bits[t & 0x1F]; - ptr += 3; - } - return 1; -} - -METHODDEF(JDIMENSION) -get_24bit_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) -/* This version is for reading 24-bit pixels */ -{ - tga_source_ptr source = (tga_source_ptr) sinfo; - register JSAMPROW ptr; - register JDIMENSION col; - - ptr = source->pub.buffer[0]; - for (col = cinfo->image_width; col > 0; col--) { - (*source->read_pixel) (source); /* Load next pixel into tga_pixel */ - *ptr++ = (JSAMPLE) UCH(source->tga_pixel[2]); /* change BGR to RGB order */ - *ptr++ = (JSAMPLE) UCH(source->tga_pixel[1]); - *ptr++ = (JSAMPLE) UCH(source->tga_pixel[0]); - } - return 1; -} - -/* - * Targa also defines a 32-bit pixel format with order B,G,R,A. - * We presently ignore the attribute byte, so the code for reading - * these pixels is identical to the 24-bit routine above. - * This works because the actual pixel length is only known to read_pixel. - */ - -#define get_32bit_row get_24bit_row - - -/* - * This method is for re-reading the input data in standard top-down - * row order. The entire image has already been read into whole_image - * with proper conversion of pixel format, but it's in a funny row order. - */ - -METHODDEF(JDIMENSION) -get_memory_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) -{ - tga_source_ptr source = (tga_source_ptr) sinfo; - JDIMENSION source_row; - - /* Compute row of source that maps to current_row of normal order */ - /* For now, assume image is bottom-up and not interlaced. */ - /* NEEDS WORK to support interlaced images! */ - source_row = cinfo->image_height - source->current_row - 1; - - /* Fetch that row from virtual array */ - source->pub.buffer = (*cinfo->mem->access_virt_sarray) - ((j_common_ptr) cinfo, source->whole_image, - source_row, (JDIMENSION) 1, FALSE); - - source->current_row++; - return 1; -} - - -/* - * This method loads the image into whole_image during the first call on - * get_pixel_rows. The get_pixel_rows pointer is then adjusted to call - * get_memory_row on subsequent calls. - */ - -METHODDEF(JDIMENSION) -preload_image (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) -{ - tga_source_ptr source = (tga_source_ptr) sinfo; - JDIMENSION row; - cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress; - - /* Read the data into a virtual array in input-file row order. */ - for (row = 0; row < cinfo->image_height; row++) { - if (progress != NULL) { - progress->pub.pass_counter = (long) row; - progress->pub.pass_limit = (long) cinfo->image_height; - (*progress->pub.progress_monitor) ((j_common_ptr) cinfo); - } - source->pub.buffer = (*cinfo->mem->access_virt_sarray) - ((j_common_ptr) cinfo, source->whole_image, row, (JDIMENSION) 1, TRUE); - (*source->get_pixel_rows) (cinfo, sinfo); - } - if (progress != NULL) - progress->completed_extra_passes++; - - /* Set up to read from the virtual array in unscrambled order */ - source->pub.get_pixel_rows = get_memory_row; - source->current_row = 0; - /* And read the first row */ - return get_memory_row(cinfo, sinfo); -} - - -/* - * Read the file header; return image size and component count. - */ - -METHODDEF(void) -start_input_tga (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) -{ - tga_source_ptr source = (tga_source_ptr) sinfo; - U_CHAR targaheader[18]; - int idlen, cmaptype, subtype, flags, interlace_type, components; - unsigned int width, height, maplen; - boolean is_bottom_up; - -#define GET_2B(offset) ((unsigned int) UCH(targaheader[offset]) + \ - (((unsigned int) UCH(targaheader[offset+1])) << 8)) - - if (! ReadOK(source->pub.input_file, targaheader, 18)) - ERREXIT(cinfo, JERR_INPUT_EOF); - - /* Pretend "15-bit" pixels are 16-bit --- we ignore attribute bit anyway */ - if (targaheader[16] == 15) - targaheader[16] = 16; - - idlen = UCH(targaheader[0]); - cmaptype = UCH(targaheader[1]); - subtype = UCH(targaheader[2]); - maplen = GET_2B(5); - width = GET_2B(12); - height = GET_2B(14); - source->pixel_size = UCH(targaheader[16]) >> 3; - flags = UCH(targaheader[17]); /* Image Descriptor byte */ - - is_bottom_up = ((flags & 0x20) == 0); /* bit 5 set => top-down */ - interlace_type = flags >> 6; /* bits 6/7 are interlace code */ - - if (cmaptype > 1 || /* cmaptype must be 0 or 1 */ - source->pixel_size < 1 || source->pixel_size > 4 || - (UCH(targaheader[16]) & 7) != 0 || /* bits/pixel must be multiple of 8 */ - interlace_type != 0) /* currently don't allow interlaced image */ - ERREXIT(cinfo, JERR_TGA_BADPARMS); - - if (subtype > 8) { - /* It's an RLE-coded file */ - source->read_pixel = read_rle_pixel; - source->block_count = source->dup_pixel_count = 0; - subtype -= 8; - } else { - /* Non-RLE file */ - source->read_pixel = read_non_rle_pixel; - } - - /* Now should have subtype 1, 2, or 3 */ - components = 3; /* until proven different */ - cinfo->in_color_space = JCS_RGB; - - switch (subtype) { - case 1: /* Colormapped image */ - if (source->pixel_size == 1 && cmaptype == 1) - source->get_pixel_rows = get_8bit_row; - else - ERREXIT(cinfo, JERR_TGA_BADPARMS); - TRACEMS2(cinfo, 1, JTRC_TGA_MAPPED, width, height); - break; - case 2: /* RGB image */ - switch (source->pixel_size) { - case 2: - source->get_pixel_rows = get_16bit_row; - break; - case 3: - source->get_pixel_rows = get_24bit_row; - break; - case 4: - source->get_pixel_rows = get_32bit_row; - break; - default: - ERREXIT(cinfo, JERR_TGA_BADPARMS); - break; - } - TRACEMS2(cinfo, 1, JTRC_TGA, width, height); - break; - case 3: /* Grayscale image */ - components = 1; - cinfo->in_color_space = JCS_GRAYSCALE; - if (source->pixel_size == 1) - source->get_pixel_rows = get_8bit_gray_row; - else - ERREXIT(cinfo, JERR_TGA_BADPARMS); - TRACEMS2(cinfo, 1, JTRC_TGA_GRAY, width, height); - break; - default: - ERREXIT(cinfo, JERR_TGA_BADPARMS); - break; - } - - if (is_bottom_up) { - /* Create a virtual array to buffer the upside-down image. */ - source->whole_image = (*cinfo->mem->request_virt_sarray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE, - (JDIMENSION) width * components, (JDIMENSION) height, (JDIMENSION) 1); - if (cinfo->progress != NULL) { - cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress; - progress->total_extra_passes++; /* count file input as separate pass */ - } - /* source->pub.buffer will point to the virtual array. */ - source->pub.buffer_height = 1; /* in case anyone looks at it */ - source->pub.get_pixel_rows = preload_image; - } else { - /* Don't need a virtual array, but do need a one-row input buffer. */ - source->whole_image = NULL; - source->pub.buffer = (*cinfo->mem->alloc_sarray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, - (JDIMENSION) width * components, (JDIMENSION) 1); - source->pub.buffer_height = 1; - source->pub.get_pixel_rows = source->get_pixel_rows; - } - - while (idlen--) /* Throw away ID field */ - (void) read_byte(source); - - if (maplen > 0) { - if (maplen > 256 || GET_2B(3) != 0) - ERREXIT(cinfo, JERR_TGA_BADCMAP); - /* Allocate space to store the colormap */ - source->colormap = (*cinfo->mem->alloc_sarray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, (JDIMENSION) maplen, (JDIMENSION) 3); - /* and read it from the file */ - read_colormap(source, (int) maplen, UCH(targaheader[7])); - } else { - if (cmaptype) /* but you promised a cmap! */ - ERREXIT(cinfo, JERR_TGA_BADPARMS); - source->colormap = NULL; - } - - cinfo->input_components = components; - cinfo->data_precision = 8; - cinfo->image_width = width; - cinfo->image_height = height; -} - - -/* - * Finish up at the end of the file. - */ - -METHODDEF(void) -finish_input_tga (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) -{ - /* no work */ -} - - -/* - * The module selection routine for Targa format input. - */ - -GLOBAL(cjpeg_source_ptr) -jinit_read_targa (j_compress_ptr cinfo) -{ - tga_source_ptr source; - - /* Create module interface object */ - source = (tga_source_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(tga_source_struct)); - source->cinfo = cinfo; /* make back link for subroutines */ - /* Fill in method ptrs, except get_pixel_rows which start_input sets */ - source->pub.start_input = start_input_tga; - source->pub.finish_input = finish_input_tga; - - return (cjpeg_source_ptr) source; -} - -#endif /* TARGA_SUPPORTED */ diff --git a/jpeg/readme.dos b/jpeg/readme.dos deleted file mode 100755 index 3267876..0000000 --- a/jpeg/readme.dos +++ /dev/null @@ -1,15 +0,0 @@ -This archive contains a DOS-friendly version of the Independent JPEG Group's -source code. It differs from the normal distribution in that: - -1. The archive format is zip rather than tar+gzip. You should be able to -unpack it with PKUNZIP (2.04g or later) or Info-Zip's unzip or 7-Zip. - -2. Newlines have been converted from Unix (LF) to DOS (CR/LF) style in all -text files, but not in the binary files (test*.*). - -3. Object files have been included for jmemdosa.asm. See jdosaobj.txt. - -Please see the main README file for the primary documentation. - -If you'd rather have a non-DOSified archive, see the ARCHIVE LOCATIONS section -of README. diff --git a/jpeg/structure.txt b/jpeg/structure.txt deleted file mode 100755 index 44e48ca..0000000 --- a/jpeg/structure.txt +++ /dev/null @@ -1,941 +0,0 @@ -IJG JPEG LIBRARY: SYSTEM ARCHITECTURE - -Copyright (C) 1991-2012, Thomas G. Lane, Guido Vollbeding. -This file is part of the Independent JPEG Group's software. -For conditions of distribution and use, see the accompanying README file. - - -This file provides an overview of the architecture of the IJG JPEG software; -that is, the functions of the various modules in the system and the interfaces -between modules. For more precise details about any data structure or calling -convention, see the include files and comments in the source code. - -We assume that the reader is already somewhat familiar with the JPEG standard. -The README file includes references for learning about JPEG. The file -libjpeg.txt describes the library from the viewpoint of an application -programmer using the library; it's best to read that file before this one. -Also, the file coderules.txt describes the coding style conventions we use. - -In this document, JPEG-specific terminology follows the JPEG standard: - A "component" means a color channel, e.g., Red or Luminance. - A "sample" is a single component value (i.e., one number in the image data). - A "coefficient" is a frequency coefficient (a DCT transform output number). - A "block" is an array of samples or coefficients. - An "MCU" (minimum coded unit) is an interleaved set of blocks of size - determined by the sampling factors, or a single block in a - noninterleaved scan. -We do not use the terms "pixel" and "sample" interchangeably. When we say -pixel, we mean an element of the full-size image, while a sample is an element -of the downsampled image. Thus the number of samples may vary across -components while the number of pixels does not. (This terminology is not used -rigorously throughout the code, but it is used in places where confusion would -otherwise result.) - - -*** System features *** - -The IJG distribution contains two parts: - * A subroutine library for JPEG compression and decompression. - * cjpeg/djpeg, two sample applications that use the library to transform - JFIF JPEG files to and from several other image formats. -cjpeg/djpeg are of no great intellectual complexity: they merely add a simple -command-line user interface and I/O routines for several uncompressed image -formats. This document concentrates on the library itself. - -We desire the library to be capable of supporting all JPEG baseline, extended -sequential, and progressive DCT processes. The library does not support the -hierarchical or lossless processes defined in the standard. - -Within these limits, any set of compression parameters allowed by the JPEG -spec should be readable for decompression. (We can be more restrictive about -what formats we can generate.) Although the system design allows for all -parameter values, some uncommon settings are not yet implemented and may -never be; nonintegral sampling ratios are the prime example. Furthermore, -we treat 8-bit vs. 12-bit data precision as a compile-time switch, not a -run-time option, because most machines can store 8-bit pixels much more -compactly than 12-bit. - -By itself, the library handles only interchange JPEG datastreams --- in -particular the widely used JFIF file format. The library can be used by -surrounding code to process interchange or abbreviated JPEG datastreams that -are embedded in more complex file formats. (For example, libtiff uses this -library to implement JPEG compression within the TIFF file format.) - -The library includes a substantial amount of code that is not covered by the -JPEG standard but is necessary for typical applications of JPEG. These -functions preprocess the image before JPEG compression or postprocess it after -decompression. They include colorspace conversion, downsampling/upsampling, -and color quantization. This code can be omitted if not needed. - -A wide range of quality vs. speed tradeoffs are possible in JPEG processing, -and even more so in decompression postprocessing. The decompression library -provides multiple implementations that cover most of the useful tradeoffs, -ranging from very-high-quality down to fast-preview operation. On the -compression side we have generally not provided low-quality choices, since -compression is normally less time-critical. It should be understood that the -low-quality modes may not meet the JPEG standard's accuracy requirements; -nonetheless, they are useful for viewers. - - -*** Portability issues *** - -Portability is an essential requirement for the library. The key portability -issues that show up at the level of system architecture are: - -1. Memory usage. We want the code to be able to run on PC-class machines -with limited memory. Images should therefore be processed sequentially (in -strips), to avoid holding the whole image in memory at once. Where a -full-image buffer is necessary, we should be able to use either virtual memory -or temporary files. - -2. Near/far pointer distinction. To run efficiently on 80x86 machines, the -code should distinguish "small" objects (kept in near data space) from -"large" ones (kept in far data space). This is an annoying restriction, but -fortunately it does not impact code quality for less brain-damaged machines, -and the source code clutter turns out to be minimal with sufficient use of -pointer typedefs. - -3. Data precision. We assume that "char" is at least 8 bits, "short" and -"int" at least 16, "long" at least 32. The code will work fine with larger -data sizes, although memory may be used inefficiently in some cases. However, -the JPEG compressed datastream must ultimately appear on external storage as a -sequence of 8-bit bytes if it is to conform to the standard. This may pose a -problem on machines where char is wider than 8 bits. The library represents -compressed data as an array of values of typedef JOCTET. If no data type -exactly 8 bits wide is available, custom data source and data destination -modules must be written to unpack and pack the chosen JOCTET datatype into -8-bit external representation. - - -*** System overview *** - -The compressor and decompressor are each divided into two main sections: -the JPEG compressor or decompressor proper, and the preprocessing or -postprocessing functions. The interface between these two sections is the -image data that the official JPEG spec regards as its input or output: this -data is in the colorspace to be used for compression, and it is downsampled -to the sampling factors to be used. The preprocessing and postprocessing -steps are responsible for converting a normal image representation to or from -this form. (Those few applications that want to deal with YCbCr downsampled -data can skip the preprocessing or postprocessing step.) - -Looking more closely, the compressor library contains the following main -elements: - - Preprocessing: - * Color space conversion (e.g., RGB to YCbCr). - * Edge expansion and downsampling. Optionally, this step can do simple - smoothing --- this is often helpful for low-quality source data. - JPEG proper: - * MCU assembly, DCT, quantization. - * Entropy coding (sequential or progressive, Huffman or arithmetic). - -In addition to these modules we need overall control, marker generation, -and support code (memory management & error handling). There is also a -module responsible for physically writing the output data --- typically -this is just an interface to fwrite(), but some applications may need to -do something else with the data. - -The decompressor library contains the following main elements: - - JPEG proper: - * Entropy decoding (sequential or progressive, Huffman or arithmetic). - * Dequantization, inverse DCT, MCU disassembly. - Postprocessing: - * Upsampling. Optionally, this step may be able to do more general - rescaling of the image. - * Color space conversion (e.g., YCbCr to RGB). This step may also - provide gamma adjustment [ currently it does not ]. - * Optional color quantization (e.g., reduction to 256 colors). - * Optional color precision reduction (e.g., 24-bit to 15-bit color). - [This feature is not currently implemented.] - -We also need overall control, marker parsing, and a data source module. -The support code (memory management & error handling) can be shared with -the compression half of the library. - -There may be several implementations of each of these elements, particularly -in the decompressor, where a wide range of speed/quality tradeoffs is very -useful. It must be understood that some of the best speedups involve -merging adjacent steps in the pipeline. For example, upsampling, color space -conversion, and color quantization might all be done at once when using a -low-quality ordered-dither technique. The system architecture is designed to -allow such merging where appropriate. - - -Note: it is convenient to regard edge expansion (padding to block boundaries) -as a preprocessing/postprocessing function, even though the JPEG spec includes -it in compression/decompression. We do this because downsampling/upsampling -can be simplified a little if they work on padded data: it's not necessary to -have special cases at the right and bottom edges. Therefore the interface -buffer is always an integral number of blocks wide and high, and we expect -compression preprocessing to pad the source data properly. Padding will occur -only to the next block (N-sample) boundary. In an interleaved-scan situation, -additional dummy blocks may be used to fill out MCUs, but the MCU assembly and -disassembly logic will create or discard these blocks internally. (This is -advantageous for speed reasons, since we avoid DCTing the dummy blocks. -It also permits a small reduction in file size, because the compressor can -choose dummy block contents so as to minimize their size in compressed form. -Finally, it makes the interface buffer specification independent of whether -the file is actually interleaved or not.) Applications that wish to deal -directly with the downsampled data must provide similar buffering and padding -for odd-sized images. - - -*** Poor man's object-oriented programming *** - -It should be clear by now that we have a lot of quasi-independent processing -steps, many of which have several possible behaviors. To avoid cluttering the -code with lots of switch statements, we use a simple form of object-style -programming to separate out the different possibilities. - -For example, two different color quantization algorithms could be implemented -as two separate modules that present the same external interface; at runtime, -the calling code will access the proper module indirectly through an "object". - -We can get the limited features we need while staying within portable C. -The basic tool is a function pointer. An "object" is just a struct -containing one or more function pointer fields, each of which corresponds to -a method name in real object-oriented languages. During initialization we -fill in the function pointers with references to whichever module we have -determined we need to use in this run. Then invocation of the module is done -by indirecting through a function pointer; on most machines this is no more -expensive than a switch statement, which would be the only other way of -making the required run-time choice. The really significant benefit, of -course, is keeping the source code clean and well structured. - -We can also arrange to have private storage that varies between different -implementations of the same kind of object. We do this by making all the -module-specific object structs be separately allocated entities, which will -be accessed via pointers in the master compression or decompression struct. -The "public" fields or methods for a given kind of object are specified by -a commonly known struct. But a module's initialization code can allocate -a larger struct that contains the common struct as its first member, plus -additional private fields. With appropriate pointer casting, the module's -internal functions can access these private fields. (For a simple example, -see jdatadst.c, which implements the external interface specified by struct -jpeg_destination_mgr, but adds extra fields.) - -(Of course this would all be a lot easier if we were using C++, but we are -not yet prepared to assume that everyone has a C++ compiler.) - -An important benefit of this scheme is that it is easy to provide multiple -versions of any method, each tuned to a particular case. While a lot of -precalculation might be done to select an optimal implementation of a method, -the cost per invocation is constant. For example, the upsampling step might -have a "generic" method, plus one or more "hardwired" methods for the most -popular sampling factors; the hardwired methods would be faster because they'd -use straight-line code instead of for-loops. The cost to determine which -method to use is paid only once, at startup, and the selection criteria are -hidden from the callers of the method. - -This plan differs a little bit from usual object-oriented structures, in that -only one instance of each object class will exist during execution. The -reason for having the class structure is that on different runs we may create -different instances (choose to execute different modules). You can think of -the term "method" as denoting the common interface presented by a particular -set of interchangeable functions, and "object" as denoting a group of related -methods, or the total shared interface behavior of a group of modules. - - -*** Overall control structure *** - -We previously mentioned the need for overall control logic in the compression -and decompression libraries. In IJG implementations prior to v5, overall -control was mostly provided by "pipeline control" modules, which proved to be -large, unwieldy, and hard to understand. To improve the situation, the -control logic has been subdivided into multiple modules. The control modules -consist of: - -1. Master control for module selection and initialization. This has two -responsibilities: - - 1A. Startup initialization at the beginning of image processing. - The individual processing modules to be used in this run are selected - and given initialization calls. - - 1B. Per-pass control. This determines how many passes will be performed - and calls each active processing module to configure itself - appropriately at the beginning of each pass. End-of-pass processing, - where necessary, is also invoked from the master control module. - - Method selection is partially distributed, in that a particular processing - module may contain several possible implementations of a particular method, - which it will select among when given its initialization call. The master - control code need only be concerned with decisions that affect more than - one module. - -2. Data buffering control. A separate control module exists for each - inter-processing-step data buffer. This module is responsible for - invoking the processing steps that write or read that data buffer. - -Each buffer controller sees the world as follows: - -input data => processing step A => buffer => processing step B => output data - | | | - ------------------ controller ------------------ - -The controller knows the dataflow requirements of steps A and B: how much data -they want to accept in one chunk and how much they output in one chunk. Its -function is to manage its buffer and call A and B at the proper times. - -A data buffer control module may itself be viewed as a processing step by a -higher-level control module; thus the control modules form a binary tree with -elementary processing steps at the leaves of the tree. - -The control modules are objects. A considerable amount of flexibility can -be had by replacing implementations of a control module. For example: -* Merging of adjacent steps in the pipeline is done by replacing a control - module and its pair of processing-step modules with a single processing- - step module. (Hence the possible merges are determined by the tree of - control modules.) -* In some processing modes, a given interstep buffer need only be a "strip" - buffer large enough to accommodate the desired data chunk sizes. In other - modes, a full-image buffer is needed and several passes are required. - The control module determines which kind of buffer is used and manipulates - virtual array buffers as needed. One or both processing steps may be - unaware of the multi-pass behavior. - -In theory, we might be able to make all of the data buffer controllers -interchangeable and provide just one set of implementations for all. In -practice, each one contains considerable special-case processing for its -particular job. The buffer controller concept should be regarded as an -overall system structuring principle, not as a complete description of the -task performed by any one controller. - - -*** Compression object structure *** - -Here is a sketch of the logical structure of the JPEG compression library: - - |-- Colorspace conversion - |-- Preprocessing controller --| - | |-- Downsampling -Main controller --| - | |-- Forward DCT, quantize - |-- Coefficient controller --| - |-- Entropy encoding - -This sketch also describes the flow of control (subroutine calls) during -typical image data processing. Each of the components shown in the diagram is -an "object" which may have several different implementations available. One -or more source code files contain the actual implementation(s) of each object. - -The objects shown above are: - -* Main controller: buffer controller for the subsampled-data buffer, which - holds the preprocessed input data. This controller invokes preprocessing to - fill the subsampled-data buffer, and JPEG compression to empty it. There is - usually no need for a full-image buffer here; a strip buffer is adequate. - -* Preprocessing controller: buffer controller for the downsampling input data - buffer, which lies between colorspace conversion and downsampling. Note - that a unified conversion/downsampling module would probably replace this - controller entirely. - -* Colorspace conversion: converts application image data into the desired - JPEG color space; also changes the data from pixel-interleaved layout to - separate component planes. Processes one pixel row at a time. - -* Downsampling: performs reduction of chroma components as required. - Optionally may perform pixel-level smoothing as well. Processes a "row - group" at a time, where a row group is defined as Vmax pixel rows of each - component before downsampling, and Vk sample rows afterwards (remember Vk - differs across components). Some downsampling or smoothing algorithms may - require context rows above and below the current row group; the - preprocessing controller is responsible for supplying these rows via proper - buffering. The downsampler is responsible for edge expansion at the right - edge (i.e., extending each sample row to a multiple of N samples); but the - preprocessing controller is responsible for vertical edge expansion (i.e., - duplicating the bottom sample row as needed to make a multiple of N rows). - -* Coefficient controller: buffer controller for the DCT-coefficient data. - This controller handles MCU assembly, including insertion of dummy DCT - blocks when needed at the right or bottom edge. When performing - Huffman-code optimization or emitting a multiscan JPEG file, this - controller is responsible for buffering the full image. The equivalent of - one fully interleaved MCU row of subsampled data is processed per call, - even when the JPEG file is noninterleaved. - -* Forward DCT and quantization: Perform DCT, quantize, and emit coefficients. - Works on one or more DCT blocks at a time. (Note: the coefficients are now - emitted in normal array order, which the entropy encoder is expected to - convert to zigzag order as necessary. Prior versions of the IJG code did - the conversion to zigzag order within the quantization step.) - -* Entropy encoding: Perform Huffman or arithmetic entropy coding and emit the - coded data to the data destination module. Works on one MCU per call. - For progressive JPEG, the same DCT blocks are fed to the entropy coder - during each pass, and the coder must emit the appropriate subset of - coefficients. - -In addition to the above objects, the compression library includes these -objects: - -* Master control: determines the number of passes required, controls overall - and per-pass initialization of the other modules. - -* Marker writing: generates JPEG markers (except for RSTn, which is emitted - by the entropy encoder when needed). - -* Data destination manager: writes the output JPEG datastream to its final - destination (e.g., a file). The destination manager supplied with the - library knows how to write to a stdio stream or to a memory buffer; - for other behaviors, the surrounding application may provide its own - destination manager. - -* Memory manager: allocates and releases memory, controls virtual arrays - (with backing store management, where required). - -* Error handler: performs formatting and output of error and trace messages; - determines handling of nonfatal errors. The surrounding application may - override some or all of this object's methods to change error handling. - -* Progress monitor: supports output of "percent-done" progress reports. - This object represents an optional callback to the surrounding application: - if wanted, it must be supplied by the application. - -The error handler, destination manager, and progress monitor objects are -defined as separate objects in order to simplify application-specific -customization of the JPEG library. A surrounding application may override -individual methods or supply its own all-new implementation of one of these -objects. The object interfaces for these objects are therefore treated as -part of the application interface of the library, whereas the other objects -are internal to the library. - -The error handler and memory manager are shared by JPEG compression and -decompression; the progress monitor, if used, may be shared as well. - - -*** Decompression object structure *** - -Here is a sketch of the logical structure of the JPEG decompression library: - - |-- Entropy decoding - |-- Coefficient controller --| - | |-- Dequantize, Inverse DCT -Main controller --| - | |-- Upsampling - |-- Postprocessing controller --| |-- Colorspace conversion - |-- Color quantization - |-- Color precision reduction - -As before, this diagram also represents typical control flow. The objects -shown are: - -* Main controller: buffer controller for the subsampled-data buffer, which - holds the output of JPEG decompression proper. This controller's primary - task is to feed the postprocessing procedure. Some upsampling algorithms - may require context rows above and below the current row group; when this - is true, the main controller is responsible for managing its buffer so as - to make context rows available. In the current design, the main buffer is - always a strip buffer; a full-image buffer is never required. - -* Coefficient controller: buffer controller for the DCT-coefficient data. - This controller handles MCU disassembly, including deletion of any dummy - DCT blocks at the right or bottom edge. When reading a multiscan JPEG - file, this controller is responsible for buffering the full image. - (Buffering DCT coefficients, rather than samples, is necessary to support - progressive JPEG.) The equivalent of one fully interleaved MCU row of - subsampled data is processed per call, even when the source JPEG file is - noninterleaved. - -* Entropy decoding: Read coded data from the data source module and perform - Huffman or arithmetic entropy decoding. Works on one MCU per call. - For progressive JPEG decoding, the coefficient controller supplies the prior - coefficients of each MCU (initially all zeroes), which the entropy decoder - modifies in each scan. - -* Dequantization and inverse DCT: like it says. Note that the coefficients - buffered by the coefficient controller have NOT been dequantized; we - merge dequantization and inverse DCT into a single step for speed reasons. - When scaled-down output is asked for, simplified DCT algorithms may be used - that need fewer coefficients and emit fewer samples per DCT block, not the - full 8x8. Works on one DCT block at a time. - -* Postprocessing controller: buffer controller for the color quantization - input buffer, when quantization is in use. (Without quantization, this - controller just calls the upsampler.) For two-pass quantization, this - controller is responsible for buffering the full-image data. - -* Upsampling: restores chroma components to full size. (May support more - general output rescaling, too. Note that if undersized DCT outputs have - been emitted by the DCT module, this module must adjust so that properly - sized outputs are created.) Works on one row group at a time. This module - also calls the color conversion module, so its top level is effectively a - buffer controller for the upsampling->color conversion buffer. However, in - all but the highest-quality operating modes, upsampling and color - conversion are likely to be merged into a single step. - -* Colorspace conversion: convert from JPEG color space to output color space, - and change data layout from separate component planes to pixel-interleaved. - Works on one pixel row at a time. - -* Color quantization: reduce the data to colormapped form, using either an - externally specified colormap or an internally generated one. This module - is not used for full-color output. Works on one pixel row at a time; may - require two passes to generate a color map. Note that the output will - always be a single component representing colormap indexes. In the current - design, the output values are JSAMPLEs, so an 8-bit compilation cannot - quantize to more than 256 colors. This is unlikely to be a problem in - practice. - -* Color reduction: this module handles color precision reduction, e.g., - generating 15-bit color (5 bits/primary) from JPEG's 24-bit output. - Not quite clear yet how this should be handled... should we merge it with - colorspace conversion??? - -Note that some high-speed operating modes might condense the entire -postprocessing sequence to a single module (upsample, color convert, and -quantize in one step). - -In addition to the above objects, the decompression library includes these -objects: - -* Master control: determines the number of passes required, controls overall - and per-pass initialization of the other modules. This is subdivided into - input and output control: jdinput.c controls only input-side processing, - while jdmaster.c handles overall initialization and output-side control. - -* Marker reading: decodes JPEG markers (except for RSTn). - -* Data source manager: supplies the input JPEG datastream. The source - manager supplied with the library knows how to read from a stdio stream - or from a memory buffer; for other behaviors, the surrounding application - may provide its own source manager. - -* Memory manager: same as for compression library. - -* Error handler: same as for compression library. - -* Progress monitor: same as for compression library. - -As with compression, the data source manager, error handler, and progress -monitor are candidates for replacement by a surrounding application. - - -*** Decompression input and output separation *** - -To support efficient incremental display of progressive JPEG files, the -decompressor is divided into two sections that can run independently: - -1. Data input includes marker parsing, entropy decoding, and input into the - coefficient controller's DCT coefficient buffer. Note that this - processing is relatively cheap and fast. - -2. Data output reads from the DCT coefficient buffer and performs the IDCT - and all postprocessing steps. - -For a progressive JPEG file, the data input processing is allowed to get -arbitrarily far ahead of the data output processing. (This occurs only -if the application calls jpeg_consume_input(); otherwise input and output -run in lockstep, since the input section is called only when the output -section needs more data.) In this way the application can avoid making -extra display passes when data is arriving faster than the display pass -can run. Furthermore, it is possible to abort an output pass without -losing anything, since the coefficient buffer is read-only as far as the -output section is concerned. See libjpeg.txt for more detail. - -A full-image coefficient array is only created if the JPEG file has multiple -scans (or if the application specifies buffered-image mode anyway). When -reading a single-scan file, the coefficient controller normally creates only -a one-MCU buffer, so input and output processing must run in lockstep in this -case. jpeg_consume_input() is effectively a no-op in this situation. - -The main impact of dividing the decompressor in this fashion is that we must -be very careful with shared variables in the cinfo data structure. Each -variable that can change during the course of decompression must be -classified as belonging to data input or data output, and each section must -look only at its own variables. For example, the data output section may not -depend on any of the variables that describe the current scan in the JPEG -file, because these may change as the data input section advances into a new -scan. - -The progress monitor is (somewhat arbitrarily) defined to treat input of the -file as one pass when buffered-image mode is not used, and to ignore data -input work completely when buffered-image mode is used. Note that the -library has no reliable way to predict the number of passes when dealing -with a progressive JPEG file, nor can it predict the number of output passes -in buffered-image mode. So the work estimate is inherently bogus anyway. - -No comparable division is currently made in the compression library, because -there isn't any real need for it. - - -*** Data formats *** - -Arrays of pixel sample values use the following data structure: - - typedef something JSAMPLE; a pixel component value, 0..MAXJSAMPLE - typedef JSAMPLE *JSAMPROW; ptr to a row of samples - typedef JSAMPROW *JSAMPARRAY; ptr to a list of rows - typedef JSAMPARRAY *JSAMPIMAGE; ptr to a list of color-component arrays - -The basic element type JSAMPLE will typically be one of unsigned char, -(signed) char, or short. Short will be used if samples wider than 8 bits are -to be supported (this is a compile-time option). Otherwise, unsigned char is -used if possible. If the compiler only supports signed chars, then it is -necessary to mask off the value when reading. Thus, all reads of JSAMPLE -values must be coded as "GETJSAMPLE(value)", where the macro will be defined -as "((value) & 0xFF)" on signed-char machines and "((int) (value))" elsewhere. - -With these conventions, JSAMPLE values can be assumed to be >= 0. This helps -simplify correct rounding during downsampling, etc. The JPEG standard's -specification that sample values run from -128..127 is accommodated by -subtracting 128 from the sample value in the DCT step. Similarly, during -decompression the output of the IDCT step will be immediately shifted back to -0..255. (NB: different values are required when 12-bit samples are in use. -The code is written in terms of MAXJSAMPLE and CENTERJSAMPLE, which will be -defined as 255 and 128 respectively in an 8-bit implementation, and as 4095 -and 2048 in a 12-bit implementation.) - -We use a pointer per row, rather than a two-dimensional JSAMPLE array. This -choice costs only a small amount of memory and has several benefits: -* Code using the data structure doesn't need to know the allocated width of - the rows. This simplifies edge expansion/compression, since we can work - in an array that's wider than the logical picture width. -* Indexing doesn't require multiplication; this is a performance win on many - machines. -* Arrays with more than 64K total elements can be supported even on machines - where malloc() cannot allocate chunks larger than 64K. -* The rows forming a component array may be allocated at different times - without extra copying. This trick allows some speedups in smoothing steps - that need access to the previous and next rows. - -Note that each color component is stored in a separate array; we don't use the -traditional layout in which the components of a pixel are stored together. -This simplifies coding of modules that work on each component independently, -because they don't need to know how many components there are. Furthermore, -we can read or write each component to a temporary file independently, which -is helpful when dealing with noninterleaved JPEG files. - -In general, a specific sample value is accessed by code such as - GETJSAMPLE(image[colorcomponent][row][col]) -where col is measured from the image left edge, but row is measured from the -first sample row currently in memory. Either of the first two indexings can -be precomputed by copying the relevant pointer. - - -Since most image-processing applications prefer to work on images in which -the components of a pixel are stored together, the data passed to or from the -surrounding application uses the traditional convention: a single pixel is -represented by N consecutive JSAMPLE values, and an image row is an array of -(# of color components)*(image width) JSAMPLEs. One or more rows of data can -be represented by a pointer of type JSAMPARRAY in this scheme. This scheme is -converted to component-wise storage inside the JPEG library. (Applications -that want to skip JPEG preprocessing or postprocessing will have to contend -with component-wise storage.) - - -Arrays of DCT-coefficient values use the following data structure: - - typedef short JCOEF; a 16-bit signed integer - typedef JCOEF JBLOCK[DCTSIZE2]; an 8x8 block of coefficients - typedef JBLOCK *JBLOCKROW; ptr to one horizontal row of 8x8 blocks - typedef JBLOCKROW *JBLOCKARRAY; ptr to a list of such rows - typedef JBLOCKARRAY *JBLOCKIMAGE; ptr to a list of color component arrays - -The underlying type is at least a 16-bit signed integer; while "short" is big -enough on all machines of interest, on some machines it is preferable to use -"int" for speed reasons, despite the storage cost. Coefficients are grouped -into 8x8 blocks (but we always use #defines DCTSIZE and DCTSIZE2 rather than -"8" and "64"). - -The contents of a coefficient block may be in either "natural" or zigzagged -order, and may be true values or divided by the quantization coefficients, -depending on where the block is in the processing pipeline. In the current -library, coefficient blocks are kept in natural order everywhere; the entropy -codecs zigzag or dezigzag the data as it is written or read. The blocks -contain quantized coefficients everywhere outside the DCT/IDCT subsystems. -(This latter decision may need to be revisited to support variable -quantization a la JPEG Part 3.) - -Notice that the allocation unit is now a row of 8x8 coefficient blocks, -corresponding to N rows of samples. Otherwise the structure is much the same -as for samples, and for the same reasons. - -On machines where malloc() can't handle a request bigger than 64Kb, this data -structure limits us to rows of less than 512 JBLOCKs, or a picture width of -4000+ pixels. This seems an acceptable restriction. - - -On 80x86 machines, the bottom-level pointer types (JSAMPROW and JBLOCKROW) -must be declared as "far" pointers, but the upper levels can be "near" -(implying that the pointer lists are allocated in the DS segment). -We use a #define symbol FAR, which expands to the "far" keyword when -compiling on 80x86 machines and to nothing elsewhere. - - -*** Suspendable processing *** - -In some applications it is desirable to use the JPEG library as an -incremental, memory-to-memory filter. In this situation the data source or -destination may be a limited-size buffer, and we can't rely on being able to -empty or refill the buffer at arbitrary times. Instead the application would -like to have control return from the library at buffer overflow/underrun, and -then resume compression or decompression at a later time. - -This scenario is supported for simple cases. (For anything more complex, we -recommend that the application "bite the bullet" and develop real multitasking -capability.) The libjpeg.txt file goes into more detail about the usage and -limitations of this capability; here we address the implications for library -structure. - -The essence of the problem is that the entropy codec (coder or decoder) must -be prepared to stop at arbitrary times. In turn, the controllers that call -the entropy codec must be able to stop before having produced or consumed all -the data that they normally would handle in one call. That part is reasonably -straightforward: we make the controller call interfaces include "progress -counters" which indicate the number of data chunks successfully processed, and -we require callers to test the counter rather than just assume all of the data -was processed. - -Rather than trying to restart at an arbitrary point, the current Huffman -codecs are designed to restart at the beginning of the current MCU after a -suspension due to buffer overflow/underrun. At the start of each call, the -codec's internal state is loaded from permanent storage (in the JPEG object -structures) into local variables. On successful completion of the MCU, the -permanent state is updated. (This copying is not very expensive, and may even -lead to *improved* performance if the local variables can be registerized.) -If a suspension occurs, the codec simply returns without updating the state, -thus effectively reverting to the start of the MCU. Note that this implies -leaving some data unprocessed in the source/destination buffer (ie, the -compressed partial MCU). The data source/destination module interfaces are -specified so as to make this possible. This also implies that the data buffer -must be large enough to hold a worst-case compressed MCU; a couple thousand -bytes should be enough. - -In a successive-approximation AC refinement scan, the progressive Huffman -decoder has to be able to undo assignments of newly nonzero coefficients if it -suspends before the MCU is complete, since decoding requires distinguishing -previously-zero and previously-nonzero coefficients. This is a bit tedious -but probably won't have much effect on performance. Other variants of Huffman -decoding need not worry about this, since they will just store the same values -again if forced to repeat the MCU. - -This approach would probably not work for an arithmetic codec, since its -modifiable state is quite large and couldn't be copied cheaply. Instead it -would have to suspend and resume exactly at the point of the buffer end. - -The JPEG marker reader is designed to cope with suspension at an arbitrary -point. It does so by backing up to the start of the marker parameter segment, -so the data buffer must be big enough to hold the largest marker of interest. -Again, a couple KB should be adequate. (A special "skip" convention is used -to bypass COM and APPn markers, so these can be larger than the buffer size -without causing problems; otherwise a 64K buffer would be needed in the worst -case.) - -The JPEG marker writer currently does *not* cope with suspension. -We feel that this is not necessary; it is much easier simply to require -the application to ensure there is enough buffer space before starting. (An -empty 2K buffer is more than sufficient for the header markers; and ensuring -there are a dozen or two bytes available before calling jpeg_finish_compress() -will suffice for the trailer.) This would not work for writing multi-scan -JPEG files, but we simply do not intend to support that capability with -suspension. - - -*** Memory manager services *** - -The JPEG library's memory manager controls allocation and deallocation of -memory, and it manages large "virtual" data arrays on machines where the -operating system does not provide virtual memory. Note that the same -memory manager serves both compression and decompression operations. - -In all cases, allocated objects are tied to a particular compression or -decompression master record, and they will be released when that master -record is destroyed. - -The memory manager does not provide explicit deallocation of objects. -Instead, objects are created in "pools" of free storage, and a whole pool -can be freed at once. This approach helps prevent storage-leak bugs, and -it speeds up operations whenever malloc/free are slow (as they often are). -The pools can be regarded as lifetime identifiers for objects. Two -pools/lifetimes are defined: - * JPOOL_PERMANENT lasts until master record is destroyed - * JPOOL_IMAGE lasts until done with image (JPEG datastream) -Permanent lifetime is used for parameters and tables that should be carried -across from one datastream to another; this includes all application-visible -parameters. Image lifetime is used for everything else. (A third lifetime, -JPOOL_PASS = one processing pass, was originally planned. However it was -dropped as not being worthwhile. The actual usage patterns are such that the -peak memory usage would be about the same anyway; and having per-pass storage -substantially complicates the virtual memory allocation rules --- see below.) - -The memory manager deals with three kinds of object: -1. "Small" objects. Typically these require no more than 10K-20K total. -2. "Large" objects. These may require tens to hundreds of K depending on - image size. Semantically they behave the same as small objects, but we - distinguish them for two reasons: - * On MS-DOS machines, large objects are referenced by FAR pointers, - small objects by NEAR pointers. - * Pool allocation heuristics may differ for large and small objects. - Note that individual "large" objects cannot exceed the size allowed by - type size_t, which may be 64K or less on some machines. -3. "Virtual" objects. These are large 2-D arrays of JSAMPLEs or JBLOCKs - (typically large enough for the entire image being processed). The - memory manager provides stripwise access to these arrays. On machines - without virtual memory, the rest of the array may be swapped out to a - temporary file. - -(Note: JSAMPARRAY and JBLOCKARRAY data structures are a combination of large -objects for the data proper and small objects for the row pointers. For -convenience and speed, the memory manager provides single routines to create -these structures. Similarly, virtual arrays include a small control block -and a JSAMPARRAY or JBLOCKARRAY working buffer, all created with one call.) - -In the present implementation, virtual arrays are only permitted to have image -lifespan. (Permanent lifespan would not be reasonable, and pass lifespan is -not very useful since a virtual array's raison d'etre is to store data for -multiple passes through the image.) We also expect that only "small" objects -will be given permanent lifespan, though this restriction is not required by -the memory manager. - -In a non-virtual-memory machine, some performance benefit can be gained by -making the in-memory buffers for virtual arrays be as large as possible. -(For small images, the buffers might fit entirely in memory, so blind -swapping would be very wasteful.) The memory manager will adjust the height -of the buffers to fit within a prespecified maximum memory usage. In order -to do this in a reasonably optimal fashion, the manager needs to allocate all -of the virtual arrays at once. Therefore, there isn't a one-step allocation -routine for virtual arrays; instead, there is a "request" routine that simply -allocates the control block, and a "realize" routine (called just once) that -determines space allocation and creates all of the actual buffers. The -realize routine must allow for space occupied by non-virtual large objects. -(We don't bother to factor in the space needed for small objects, on the -grounds that it isn't worth the trouble.) - -To support all this, we establish the following protocol for doing business -with the memory manager: - 1. Modules must request virtual arrays (which may have only image lifespan) - during the initial setup phase, i.e., in their jinit_xxx routines. - 2. All "large" objects (including JSAMPARRAYs and JBLOCKARRAYs) must also be - allocated during initial setup. - 3. realize_virt_arrays will be called at the completion of initial setup. - The above conventions ensure that sufficient information is available - for it to choose a good size for virtual array buffers. -Small objects of any lifespan may be allocated at any time. We expect that -the total space used for small objects will be small enough to be negligible -in the realize_virt_arrays computation. - -In a virtual-memory machine, we simply pretend that the available space is -infinite, thus causing realize_virt_arrays to decide that it can allocate all -the virtual arrays as full-size in-memory buffers. The overhead of the -virtual-array access protocol is very small when no swapping occurs. - -A virtual array can be specified to be "pre-zeroed"; when this flag is set, -never-yet-written sections of the array are set to zero before being made -available to the caller. If this flag is not set, never-written sections -of the array contain garbage. (This feature exists primarily because the -equivalent logic would otherwise be needed in jdcoefct.c for progressive -JPEG mode; we may as well make it available for possible other uses.) - -The first write pass on a virtual array is required to occur in top-to-bottom -order; read passes, as well as any write passes after the first one, may -access the array in any order. This restriction exists partly to simplify -the virtual array control logic, and partly because some file systems may not -support seeking beyond the current end-of-file in a temporary file. The main -implication of this restriction is that rearrangement of rows (such as -converting top-to-bottom data order to bottom-to-top) must be handled while -reading data out of the virtual array, not while putting it in. - - -*** Memory manager internal structure *** - -To isolate system dependencies as much as possible, we have broken the -memory manager into two parts. There is a reasonably system-independent -"front end" (jmemmgr.c) and a "back end" that contains only the code -likely to change across systems. All of the memory management methods -outlined above are implemented by the front end. The back end provides -the following routines for use by the front end (none of these routines -are known to the rest of the JPEG code): - -jpeg_mem_init, jpeg_mem_term system-dependent initialization/shutdown - -jpeg_get_small, jpeg_free_small interface to malloc and free library routines - (or their equivalents) - -jpeg_get_large, jpeg_free_large interface to FAR malloc/free in MSDOS machines; - else usually the same as - jpeg_get_small/jpeg_free_small - -jpeg_mem_available estimate available memory - -jpeg_open_backing_store create a backing-store object - -read_backing_store, manipulate a backing-store object -write_backing_store, -close_backing_store - -On some systems there will be more than one type of backing-store object -(specifically, in MS-DOS a backing store file might be an area of extended -memory as well as a disk file). jpeg_open_backing_store is responsible for -choosing how to implement a given object. The read/write/close routines -are method pointers in the structure that describes a given object; this -lets them be different for different object types. - -It may be necessary to ensure that backing store objects are explicitly -released upon abnormal program termination. For example, MS-DOS won't free -extended memory by itself. To support this, we will expect the main program -or surrounding application to arrange to call self_destruct (typically via -jpeg_destroy) upon abnormal termination. This may require a SIGINT signal -handler or equivalent. We don't want to have the back end module install its -own signal handler, because that would pre-empt the surrounding application's -ability to control signal handling. - -The IJG distribution includes several memory manager back end implementations. -Usually the same back end should be suitable for all applications on a given -system, but it is possible for an application to supply its own back end at -need. - - -*** Implications of DNL marker *** - -Some JPEG files may use a DNL marker to postpone definition of the image -height (this would be useful for a fax-like scanner's output, for instance). -In these files the SOF marker claims the image height is 0, and you only -find out the true image height at the end of the first scan. - -We could read these files as follows: -1. Upon seeing zero image height, replace it by 65535 (the maximum allowed). -2. When the DNL is found, update the image height in the global image - descriptor. -This implies that control modules must avoid making copies of the image -height, and must re-test for termination after each MCU row. This would -be easy enough to do. - -In cases where image-size data structures are allocated, this approach will -result in very inefficient use of virtual memory or much-larger-than-necessary -temporary files. This seems acceptable for something that probably won't be a -mainstream usage. People might have to forgo use of memory-hogging options -(such as two-pass color quantization or noninterleaved JPEG files) if they -want efficient conversion of such files. (One could improve efficiency by -demanding a user-supplied upper bound for the height, less than 65536; in most -cases it could be much less.) - -The standard also permits the SOF marker to overestimate the image height, -with a DNL to give the true, smaller height at the end of the first scan. -This would solve the space problems if the overestimate wasn't too great. -However, it implies that you don't even know whether DNL will be used. - -This leads to a couple of very serious objections: -1. Testing for a DNL marker must occur in the inner loop of the decompressor's - Huffman decoder; this implies a speed penalty whether the feature is used - or not. -2. There is no way to hide the last-minute change in image height from an - application using the decoder. Thus *every* application using the IJG - library would suffer a complexity penalty whether it cared about DNL or - not. -We currently do not support DNL because of these problems. - -A different approach is to insist that DNL-using files be preprocessed by a -separate program that reads ahead to the DNL, then goes back and fixes the SOF -marker. This is a much simpler solution and is probably far more efficient. -Even if one wants piped input, buffering the first scan of the JPEG file needs -a lot smaller temp file than is implied by the maximum-height method. For -this approach we'd simply treat DNL as a no-op in the decompressor (at most, -check that it matches the SOF image height). - -We will not worry about making the compressor capable of outputting DNL. -Something similar to the first scheme above could be applied if anyone ever -wants to make that work. diff --git a/jpeg/testimg.bmp b/jpeg/testimg.bmp deleted file mode 100755 index 012223e..0000000 Binary files a/jpeg/testimg.bmp and /dev/null differ diff --git a/jpeg/testimg.jpg b/jpeg/testimg.jpg deleted file mode 100755 index a026e48..0000000 Binary files a/jpeg/testimg.jpg and /dev/null differ diff --git a/jpeg/testimg.ppm b/jpeg/testimg.ppm deleted file mode 100755 index bd78ef8..0000000 --- a/jpeg/testimg.ppm +++ /dev/null @@ -1,4 +0,0 @@ -P6 -227 149 -255 -0/-0/-10.21/51.51.62/72.83/83/83/:3-:3-:3-:3-:3-:2/91.91.80-80-91.91.:2/80-80-80-80-80-80-80-80-6.+6.+6.+5-*5-*4,)4,)4,)4,)4,)4,)4,)4,)4,)4,)4,).+$/,%/,%0-&1.'2/(30)30)63,63,74-85.85.96/:70:70A;/B<0D>2F@2IA4JB5KC6KD4MD5MD5MD3NB2OC3OC3PD4QE5T>1Y?2b@4nB5}E6ŒG8šG9¥E7²F9ºF9¿E8ÆF;ÉF>ËF?ÌG@ÌG@íCNíCLíCLíDKíDIïBFñ>Bõ@â?@×?<Ñ=;µ@.µ@.µ@.´?-´?-³@-²?-°?-­@,ªA.¦A-¢B,A*›A)˜@*—A*’?/’?/’?/‘>,‘>,’<+’<+’<+”?+”?+”=*”=*”=*•>+–?+—@,”?:•>7—=4Ÿ?1©B3³D3¼D3¿D4º?/¶@2­E8žH;‡H9mB2T8*D3#:659549547326216005//50-72/72/72/61-61-50,50,50,.0-.0-.0-//-//-0/-2.-3--5,-4+,4*+4(*7(+=.1E69LUPdUPdUPd0/-0/-10.10.40-51.62/72.83/83/83/:3-:3-:3-:3-:3-91.91.80-80-80-80-91.91.80-80-80-80-80-80-80-80-6.+6.+5-*5-*5-*4,)4,)4,)5-*5-*5-*5-*5-*5-*5-*5-*/,%0-&0-&1.'2/(30)41*41*63,63,74-74-85.96/:70:70@:.A;/C=1E?3H@3IA4JB5JC3LC4LC4KB3MA1MA1NB2OC3PD4P>0U?1^A3jC4xD6†D4“D5žB3¨B3°@2¶@4¼B7ÂC:ÄE<ÆF=ÇG>èAKèAIèCIêDHíDGïBDó@D÷>Cø;Aø9@ö9?ð.‘>.‘>,=+’<+’<+”>-“>*“>*”=*”=*•>+–?,—@-“@8•>5˜>3Ÿ?1«A3µD4½D3ÁC4¼A2¸B6­E8œI;…G:kA3S9*D4$<66;55:4493382271161.61.72/72/72/61-61-50,50,50,.0-.0-.0-//-//-0/-2.-2.-3--5,-4*+4(*5)+<-0C47I:=h<;vDC†JI’LJST§`h¨k{rŽ‘{¢„°|†»y†½lv«[\ŒQHsQBkOFaOFaNI_RN_[Yfnotƒ‡ˆ”™•™ž—š ”™‘ƒ~ojk[]\JVUCXQaXQaXQa/.,/.,0/-10.40-40-51.51.72.72.72.92,92,92,92,92,91.80-7/,7/,7/,7/,80-91.80-80-80-80-80-80-80-80-6.+5-*5-*5-*4,)4,)4,)4,)5-*5-*5-*5-*5-*5-*5-*5-*1.'1.'2/(30)30)41*41*52+63,63,63,74-85.96/96/:70?9-@:.B<0D>2G?4H@3H@3H@3I@1I@1I@1K?1K?/L@0MA1NB2MA1QA2YB2dC2qC3|C2‰A2“@0™<+ :+©;,¯>0¶@4¼C8¿F=ÀG>à?Eá@FãBGæCFêDFðCEõADù?Dú;@û:?÷:@ñ=@è@@ÜA=Ñ@;É>7³@-³@-³@-²?,²?,²?-¯>,®?,ª?-©@-¥@,¡A+A,˜@*—A*–@)’?/‘>.‘>.‘>.=+=+=+’<+“=,“=,’<+’=)“>*“>*”?+•@,”B7–?5š>3£>2­A4¹C5¿D5ÂC4ÂD6ºF9¯I=›I=‚F;gA4P:,B6&=77=77<66:4493383072/72/62/62/62/52-52-41,41,41,,1-,1-.0-.0-//-//-0/-2.-5//4..5,-4*+4*+9-/>24C79_83l?:|E@ˆIB’NK›Z^œft”n‡Œwž€~¯zƒºs¹dm¤UU‰NEtO?lMBbPEcQHcMH^NK\[[estx…‰ˆ‡Œ†Š†…†Š|xzlghXZ[KVTEZT`ZT`ZT`.-+/.,/.,0/-10.40-40-40-51.61-61-61-81+81+81+81+50-50-4/,4/,4/,4/,50-50-61.61.61.61.61.61.61.61.3.+3.+3.+2-*2-*2-*1,)1,)4/,4/,4/,4/,4/,4/,4/,4/,30+30+30+41,41,52-52-52-52-52-63.74/850850961961>8,?9-@:.B<0E=2E=2F>1F>1G=1G>/F=.I=/I=/J>0L@0L@0JD4NE4TD4^D3hE2sB1~A/‡>-Œ9'”9'9)£<-¬@3³E8·I<ºJ>Ù@CÚACÝCEâDEçCDîACô@Cø>Aü;@û:?÷:>ð=@åA?ÚB=ËA7Ã>5°@,°@,°@,°?-¯>,¯>,®?,¬>-ª?-¦?,£@-Ÿ@,œ@+˜@*–@)”@(‘>.‘>.‘>.=-=-=-<*<*=+=+<*<*=+“=,”>-”>-”B6–?5›?2¦@2²B4½C6ÂB5ÄB5ÄF:½H>­K@˜J@|F:aA4K;.?9+@86@86?75>64:5294183073062/62/62/32.32-21,21,21,-2.-2.-2./1./1.00.00.10.5106005//5,-4+,6,-:01>45W6-b<3qA7}D9„H@ŒRQŽ_i‹iƒs˜|z¬u~·myµ^g¢RQŠMDyM?rN@dPEgQFfLC^GBVNLZ^^fjnquzvx}vz€vwzokoa`bUWYKTUG]V^]V^]V^.-+.-+.-+/.,0/-10.3/,40-3/,4/+4/+4/+4/+6/)6/)6/)4/,4/,3.+3.+3.+3.+4/,4/,50-50-50-50-50-50-50-50-3.+3.+2-*2-*2-*1,)1,)1,)4/,4/,4/,4/,4/,4/,4/,4/,41,41,41,41,41,52-52-52-52-52-63.63.74/850961961<5+=6,?8.@9/B:/C;0C;0C;.D:.D:.D:.G;-H<.I=/J>0K?1GH6KH7PG6XG5aF3jD1uB/|?,‚;)‹:'’;(š=,£B2«G7±K<´M>ÒDBÔDCØDBÝEBâC@ê@@ð>>÷:>û:=ú9<õ;>í?>áB>ÓC:ÅA5º?0¯@-®?,®?,®?,­>+­>+¬>-ª?-¨?,¤?-¢?,ž?+š?*–?+”?*“>)?.?.>->->-Ž=,Ž=,Ž=,Ž=,Ž=,Ž=,Ž=,<,=-‘>.‘>.”B4—A4@1ª@3¶B5ÁC7ÆA8Å@7ÁB;¸G?©KCJ@uE;Y>3C9-78*@86@86?75>64=53:5294173062/43/43/32.23.12-12,12,,2.-2.-2.-2./1./1.00.00.3205105104..2,,4+,7./901P5*Y9,e>/n@1tB7|KGƒYcƒg~p—xx¬s{¹js¶]e¦TT”OG‚LAyPAjPAhMAeJA`GBYHEXKKWMPU^bc`fbcha`f\Z`TWZOUYKWYL`WZ`WZ`WZ,,,,,,---.-+/.,0/-10.3/,2.+2.+3.*3.*3.*3.*3.*3.*3.+3.+2-*1,)1,)2-*3.+3.+3.+3.+3.+3.+3.+3.+3.+3.+2-*2-*2-*2-*1,)1,)1,)0+(3.+3.+3.+3.+3.+3.+3.+3.+41,41,41,41,41,41,41,41,41,52-52-63.74/850850850;4*<5+=6,>7-@7.A8/A9.A9.C9/C9-C9-F:.G;/H<.J>0K?1FI8GH6MH5TG6[F3dC0lA.t?-{<*‚;)Š;*“=,šA1£F5ªJ:­M=ÉE@ËFAÑFAÖE@ÞC?å@>í==ó9<ø:<÷9;ó;=ë?=ÝB=ÌD8¼A2±>,«@,«@,¬?+¬>-¬>-©>,©>,¨>.¥>-¢?, ?,›>,—?+•>*“>)‘?)>->->->-Ž=,Ž=,Ž=,<+Ž=,<+‹<+‹<+‹<+Œ=.>/Ž?0’C2—A2 @2­A5»B9ÃC:Ç@:Å@9»@9³H@¥NGNEoG=R@4?;039-A75A75@64>63<4194083/74/63.43.34/23.13.02-02-02--3/-3/-3/.3/.3/02/02/11/11/32032040/2.-1-,4..5//H4)M5)X8+a<,f>2nGBzYb‚lƒ€uŸ{|´u|Àmu¾bi±[[¡SLLBQAnN?jI=cH>`HB^FCX@BO2K?3DG6EF6KE5PD4VC2^C2e@.m>,v=,|;)ƒ:)Š;*“=.›B2¢F7¦I:¿D<ÂF>ÇG>ÏF>ØE>âC?ì@>ó<>õ9:ó9:ï;<å@<×B;ÆD6´A/¨=)©@-©@-©@-¨?,¨?,¨>.§=-¥>-£>, ?.ž?-š?,—>,“>*‘?*>)>->->-Œ=,Œ=,Œ=,‹<-‹<-‹<-‹<-‰<,‰<,Š=-‹=0‹=0Œ>1‘D2–C1¡A3®B6¼C:ÅA<ÇB=ÃB=»EA³PJ¥XPŽZOqSIVI@BD97A6A83@72?61=60<4194083/63.43.43.34.13.13.02-.3-.3--3/-3/-3/.3/.3/.3/02/02/00.11/22021/0/-/.,2.-3/.?0)C1'K3'T8,Z<2dGCw]hƒsˆ­„„À|ƒËszÈkq¿ed°VSšJC‡N>kK5.>5.>5.>5,B8/B8/C9/E8/G:1I<3J=4K?3EC6FB6IC5NB4TA3\@2b>0h=-q<.w9*}8)…7*Œ:,•=/›B2 D5µE9¸F;ÀG<ÈH=ÒH>ßF@èC?ð@@î:9î:9é=;àA;ÑD:¾E4¬A-¢?(¦A-¦A-¥@.¥@.¦?.¥>-¤?-¤>/¢>.Ÿ@.œ?.˜?-•>+‘?*>)>+>->->-Œ=,Œ=.Š=-Š=-Š=-Š1‹?2‘D2–C1¢B4®B6¼C;ÄC>ÄC>¾D?»PJ²[T¥e\‘f]s_TYUJFNC>KA@70@72>71=6094.83-63,63.43.34.34.13.13..3-.3-.3--3/-3/-3/.3/.3/.3/.3/02/.0-00.22022000.0/-0/-10.8,,;,)B1*K7.S<4^IHtbn‡z–Š¸‹Ê‚ˆÒy€ÐrwÈik¸XV¡GD‹I^C@[ABV>DP>EMGQSKWUQ^WU`XS_UR^TT^SV`UaZHaZHaZH,-/,-/------------.-+.-+/.,/.,1-*0,)0,)0,)/+(0+'/+*/+*/+*/+*/+*/+*/+*0,+/+*/+*/+*/+*/+*/+*/+*/+*/+*/+*/+*0,+0,+1-,1-,2.-1-,1-,1-,1-,1-,1-,1-,1-,0,)1-*2.+3/,3/,3/,3/,3/,3/,3/,3/,3/,40-51.62/73081+92,:3-;4.=4/>5.>5.>5.?4.?5,@6-C6.D7.F90G:1H;2F?5H@5J@6N@5R>3W<1\:0a7+k9.t8-|8+…9,;/“=0˜?1›?2¨@3¬B5´D8¾E:ÊG=ÕF>ßD?çB>ë?=íA?çD?ÜE>ÉC8¶C1§B.¡B,¢A.¡@-¢?,¢?,¡=-¡=-¢>. ?.œ<,š=,˜=+•>-“=,=+Ž=*Œ>*‹<+‹<+‹<+‰<,‰<,‰<,‡;-‡;-‰=/†½F@¾C>¾DA»KG·XR¯f]£qfth|rfik^S_SCSHQJBLE=D=5<8/95,74-63,33+43.34.23-13.02--2,,1+,1+-2.-2.-2.-2.-2.-2./1./1.02/02/11/11/11/11/11/11/5*2;/3A32C4/J;6]OOymy‹…Ÿ’‘½”–Ӕ݂‰×tzÈjn¸_b©YZPHmHBdA>]>>X?AVBHVLU^U`bbqnn}xv†|p€ulyoguh_k_T`Ta[Eb\Fc]G,-/,-/,-/,-/---------.-+/.,.-+.-+0,)/+(/+(/+(/+(.*).*).*).*)/+*/+*/+*/+*/+*/+*/+*/+*/+*/+*/+*/+*/+*/+*/+*0,+0,+0,+1-,1-,1-,1-,1-,1-,1-,1-,1-,1-,0,)0,)1-*2.+3/,3/,2.+2.+2.+2.+2.+2.+3/,40-51.62/80-91.:2/;30=4/>50>50=4-?4.?4.?4.B5-C6.E80G:2H;3H>5J=5L=6O>6Q=4V;2Z90_7/h8.p7.y6-‚8-‰9.’;1–<1š>1¢@3¦A5ªB5³E8¾E:ÉF<ÔE=ÜC=âC?ãD@ßF@ÕF>ÄF8±C2£B/›C-ŸB0 A/Ÿ@.ž?-ž?-Ÿ>-ž>.ž>.š=,™=.–=-“=,=+>-Œ=,‹>,Š=+Š=+‰<,‰<,‰<,‡;-‡;-…<-†4†@6‡A7ˆB8‘H7•F7£G:±I@¹HB¹FAºJFµTM²dZªreŸ~op~|mlteYgZJZOPLAKI=EC7@>2=:1:7.44*11)23+23-12,/1,/1,.0+.0+.0-/1./1./1./1./1./1./1./1.02/11/11/11/11/11/11/11/5*:9-9<15?53H?:^VTxszŠˆž‘“º”—Εׄ‹ÓxÆpyºkt¯en¥__yXZsSUjRWjU]j\gmguvr‚v‡€‘‡ƒ•‰}v†yp€sfteXfW_YA`ZBb\D,-/,-/,-/,-/,-/---------.-+.-+.-+-,*/+(.*'.*'.*'.*+.*+.*+.*+-)*-)*-)*-)*/+,/+,/+,/+,/+,/+,/+,/+,.*+.*+/+,/+,/+,0,-0,-0,-0,-0,-0,-1-.1-.1-.1-.1-.0,+0,+1-,2.-2.-2.-2.-1-,1-,1-,1-,1-,2.-3/.40/51080-91.:2/;30=31=31=4/=4/?40?4.?4.A4.C60D7/F91G:2H;5J;6K<7N=6P;6S:5V72[60c60k6.t5,}7/‡9/Ž:0”<0˜<1œ@3ž@4¢@3§A3±C6¼C8ÇD:ÎC<ÖF>ÚG@×HBÍH?¾E:­C3ŸB0™B.B/œA.›@-›>-›>-›>-›>-œ?0˜<-–=-”=,“=.>-Œ=,Š=+Š=+‰<*‰<,‰<,‡;+‡;+…<-„;,ƒ;-„<0‚<0‚<2‚>3ƒ?4…A8†C:‡D;“K<–H; H>­JDµIF´KG´SM¯_V®rg¥qœz{Šwr€ocqbVdWPQCMN@HI;DD8@@4::055+/0(01)01+/0*/0+./*./*//-//-//-//-//-//-//-//-//-//-00.00.00.00.00.00.00.00.6*>6+;8.6;63HE>_^Yyz|Šœ“²’–ÃŽ•Ë„Æ}ˆ¾{‰¸|‹´|Œ°ˆ—yƒq~‡o|‚n}€o‚€yŽ‡ƒ™‹¡”‘¨˜¦”ˆŠƒ–ƒ|{j{iXiW\V<^X>`Z@-.0-.0-.0-.0-.0-.0......---.-+-,*-,*,+).*'.*'.*',*++)*+)*+)*+)**()*()*(),*+,*+,*+,*+,*+,*+,*+,*+,*+,*+,*+,*+,*+-+,-+,-+,-+,.,-.,-.,-.,-/-./-./-./+*0,+1-,1-,1-,1-,0,+0,+0,+0,+0,+0,+1-,2.-3/.40/91/:20;31<42=31=31=31=31>3/>3/>3/@3-A4.C60D71E82G83H94I:5L:6M:6N94Q83T50^72e60o6/x8/ƒ90Š:/’;1•=1™?4™?4›?2@1¥A2­C5¸D7ÀD:ÉF<ÌG>ÌIAÄH>¶F:©C4B0—B.˜A.˜A.˜?-—>,™>,™=.™=.™=.•<,”<.“=.=-Ž<.Š=-Š=-ˆ<,ˆ;)ˆ;+‡;+‡;+„;,„;,ƒ;-‚:,;/€<1€<1>5ƒ@7ƒC:…E<†F=’M>•I<œH>¨IC¯LG¯PL¯\Tªj^§€o y˜š‚Žœƒ„–€z‹ym{lam_UYHQUDKO@EI:@D6;=057,13(01)/0*/.).-).-).-+/.,0/-/.,/.,/.,/.,/.,/.,/.,/.,0/-0/-0/-0/-0/-0/-0/-0/-8*A6):3-1961HJ=bfX{€y‰‘“Œ“£–²Œ”¸ƒ³±…™²¤¶ªµ•§§¤£Œ ž‡ž–‚™}˜‰œ‹ˆ£”°š–²›”­—‹£‹…›†’~k|iUfSXT7ZV9^Z=+/2+/2-.0-.0-.0-.0-.0...------.-+-,*-,*,+),+),+),*+,*+,*++)*+)**()*()*(),*+,*+,*+,*+,*+,*+,*+,*+,*+,*+,*+,*+,*++)*+)*+)*,*+-+,-+,.,-.,-/-./-./-./+*0,+0,+0,+0,+0,+/+*.*)/+*/+*/+*/+*0,+1-,3/.40/91/:20;31<42=32=32<20<20=20=2.=2.?1.@2/A4.B5/C60D63C84D95G96G96H94K84N51V72_60h70r7/}:1†<1=2>2˜?7—?5—?5—?3šA3£C5ªD6³E8ºE;¿F=ÀG>»F=°D8¤B5™@0–@/–A-–A-–?,•>+•<,•<,–=-–=/”<.’<-=-Ž<.‹<-‰<,ˆ<,ˆ<,‡;+†:*†:*†:*ƒ:+‚:+‚:,€:.;0€<1€=4?6‚B9ƒD;†G@‡HALA’H?˜HA¤KGªOLªWQªf]¥wh¡Œw˜›€’¥‰Š¤‡„ž…|’}t‚qlte\eRV_LMVCEL0-?1.@2/A30A30?61@72@93A96A96B94E74G51O61W6/a6/j8/u9.€0•>7•>5“?5’@4•B4™C4ŸC4¥D4ªB5²C8´E:±E;©C7 @4˜?1•?2“A,’?-“=,“=,“<+“<+”<.”<.“;-’E5:@29<134,22*1.)/+(/*'0**3*+4+,1++1++1++1++1++1++1++0,+1-,1-,1-,1-,1-,1-,1-,/.,;(;5(23+(56$CL-\hDt„`…”wŽ›‰’ž”Ÿšž–¥—•µ¡Æ¤¦Ð¨¥É¯¦Ê°§Ë¯¢Éª—¿‹³ˆ°‹³ŽŽ²Ž²¬Š„¢€€™{wŽrdx]MaHQQ5QQ5RR6,03,03,03,03./1./1./1./1/////////0/-/.,/.,.-+.-+/-..,-.,--+,,*++)*+)**()+)*+)*+)*+)*+)*+)*+)*+)*+)*+)*+)**()*()*())'()'(+)*+)*,*+-+,.,-.,-/-./-./+*/+*/+*/+*/+*.*)-)(,('0,+0,+0,+0,+1-,2.-40/40/:12;23;23<34=32<21<21;10<1/<1/<1/=/,>0->0-?1.@2/;60;62;83<94=:5=:5?82A60F5.O4-W5+b6+n8,x:-<,„<.’:6‘<5=5Ž@4A4‘B3•B2™@0Ÿ?1¦@4ªB7ªB9¥@6?5—=2•?2‘@-’?-‘>,’<+‘;*‘;,“;-“;-‘;,<.;-‹<-‰;.‡;-„;,„;,…9)…9)…9)‚9*‚9*9+~8,}9,=1€=4€@7B9„E>…HCˆKFŠMHŒIAŽGA˜JF¢SOª\X«h`©{n£Žy—Ž©ˆ…¯‹«ˆ~£„€˜€‹w{nixacr[ZhQP]IIUACL;>D60-?1.?1.96/:729839839:4:94;83>71A2+I2*S2)^4(j6)s8*|:*~;+84:5=4Œ@3‹B3A1@/”>-˜<-Ÿ=0¥@4¦A7¢@7œ>4—=4•=3‘@-?,=+<*‘;*‘;,‘;,’<-‘;.<.;-Š;,ˆ:-‡;-„;,„;,…9)…9)‚9(‚9*9*€8*~8,}9,€>2?5€@7‚C<ƒG?†IDˆMGŠOIŒICHD˜MJ¥UT¬a^­ng«s¤•€–¡ƒŠ¬‰‚°‹|«‡|£„™y‚ql{dgv__nWXeQP\HIRAAG9=@579.66.41,1,)1)'2()3)*4*+2)*2)*2)*2)*2)*2)*2)*0**1++1++1++0,+0,+0,+0,+0,+:&27(+4."47=HRb1l~J€’b‰™rŽ|Ÿ‚ŠŸ~Š§{·€˜Æ…œÎ…œÉ¢šÉŸ™Èž”׉¸Š®€‚°‹¶ˆ‚¬~ˆ¯ƒ‡ª€~œvuml„dZnRG[?IL/GJ-DG*/0*/0*/0*01+01+01+21,21,32-63.63.63.52-50,4/+4/+8.,7/,6.+5-+4,*2-*1++0,-0,-.,/--/-,1,+0*+/)*.()./(0/(//(//(//(//)-.)-.*+/+,-,*-,(.-).-)-.(./)./)--/--/---.../-.0/-2.+3.+2-)4,)5.(7.)8/(;0*;1(<2)<5+=4+>5.>5.>5.=4-<3.<1-=2.<1-<1/;0.=/.>0/>0/?11H-&C1';5)2:++=-(=.-;.45-?-+H()R%(X((Z.+Z8.[A2\G6wC-{B.„C1A3’?1•;0–:/”8+“;-‘>.‘B1‘D0‘D0B.?,<*Ÿ63›83”:2Œ<1…@1B0|A/|A/‚C2„A1ˆ>1‰=0‰;/ˆ:.‡9-‡9-v:/|@5u=0n9)s@/s@/t<+{@0{<-ƒ?4ˆD9‹H?ˆLA„NBQC€RC—HK•TRd]…ue{…lw’sz|€£ƒ‰¦ˆŽ¥‰’¤Œ‘¥Œ‡¤ˆy¢‚kŸ{awhŽea†]\zV[sS]mR[cLVTEPH=J;6G53B,/=&,:#+:#-9#/8".#/-#-,$-,&*+))+-(.1'/2'/4'06&14'14'13'32(32(30(3.)-0,-0,)//'=>0WZErx\‹gœs‹žpŒ¢qŒ§r‹¨r‰ªs³{›¾†£¿Ž ¾Œ›¹‡’²€‹­{†ªz„ª{…ª~„§}…¥€€ž|z“vr‰oi{e[jWLZIKO@CG8>B3/0*01+01+01+12,12,21,32-43.63.74/74/63.61-50,50,7/,7/,6.+6.,5-+2-*1++0,+0,-/-./-0--/-,1+*/)*.()-/(//(//(//(//)-/)-.*+.*+/+*-,*.-).-)/.*./)./)./)..0....../-./.,/.,1-*3.+3.*5.(6/)8/(90);0*<2)=3*>5,>5,>5.>5.>5.=4-<3,=2.=2.<1-;0.;0.;0.=/.>0/?10F/'D0)A3*=4+96-85.83-<1-?-+D*)K)(P*'U.)[4-_:1c?3s@+xA-€A0‰?2‘?4”;3”:1“;19.‹<-Š>.ŠA0‹B1B/ŽA/@/š93—:3’;2‹=1„?0‚@0@/?/„A1†>0‰=0‰;/‡;.„:-‚:,‚:,w9.x<1s9-n9)r?.s>.q9*u:,}=1„@5‰E:‹H?‰K@†MB„PCQC›DJ›QR–d]vfƒ‡p}”w~ ƒ¦…ˆ§ˆŽ§Š’¦‹“¥Œ£‰‚Ÿƒwœ}o˜xa•g\`VƒZU}XWyXWpSPbJKVECI;@A998340-0,+/+,.)--(,*,+)+***,+),-(,/)-2(03(03(02(02(10)1/*1-*1,+3,+32-12./0,)--%9:,TWBox[€‹i‡–o†™l†žnˆ£p†¤p„¥pŠ­w“¶€›¹‡˜¶„“³Œ®{†«xƒ§w‚¨yƒ¨|ƒ¦|„¤{x’uqˆnh{eYjWL[HGK<@D5:>/12,12,12,12,23-23-43.43.54/74/85085085083/72.61-80-80-7/,6.,6.,3.+2,,1-,1-./-.0.1..0--/,+0+*/*).1'//(//(//)-/)-/)-.*+.*+0,+0,+/.*/.*/.*0/*/0*/0*/////////0./0/-1-,1-*2-)4/+70*90+:1*<1+=3*>4+?5,?6-?6-@7.@70?6/>5.=4->3/=2.<1-;0.;0.;0.;0.<1/=20C2*E0+H/+L,-N+/M*.J*/E+.A-,@.*@/(C/(M/'Y0*d1-j30i;+o;-w;0=4‰<4Ž;5Ž94:4‹;2‡=2†>2…@1†A2‰A3ŒB5C6‘=2=1Œ>1Š>0†>/…=.…=.†=.ˆ<.‰;.ˆ:-‡9,„;,€;+~=+z=*}=3z<1v:/u;-x@1x@1v<.v;-?3„B6ŠF=‹H?ŠJA‡KA‡NC†PDDHQQšc^’ug‰„n‘t~}€¥ƒ„©‡ˆª‰©Œ“§Œ‘£‰‹ƒ„˜€”{a›k[•eXaV‰`W…`W]QtVMiPC[E=RA6F9/<2*5-&1+%.)$-(1&*1&*1&*1&*1&*1(-2).1+//*0-+0,+0+,0),1(-1&.1&.14.24.0.*'**"66*PUAmv[~‰i€k~“h™jƒŸn€ n~ m€¥q‡¬xŽ®|‹­zˆªw„©v§t€¦u¦w€¥y¤y€¢}}›yw’sp‡mh{eYkUL[HEG:=?28:-23-23-34.34.34.45/54/54/650961961:72:72:51940940:2/91.91.80-7/-4/,4/,3/.3/.3/01/01/00.1..0--/,,.2).2).2).0*.0*,0*,0*,/+*1-,1-*0/+0/+10+10+10+10+11111100010.10.2.+2.+3.*91.92,;2+<3,>4+@6-@6-A7.A8/A8/B90A8/A81@70>5.?4.=2.=2.<1-;0.;0.<1/=20=20?5,E2.O-.W(0]#/\"0W#/L'.C/.:3-55);5)E1(U.'c+*l*+e;/j;1s=3}<6…;8‰;9Š;7ˆ:6‰>9†?9…B9ƒC9…B9†B9‡A9‰@7†B/†B/‡@.‡@.‡>-ˆ<,‰:+‹9+‹8*‹8*ˆ9*…9)€<)z=(w?(t@(ƒ=3{7,x8,z3/>3/=2.=2.=20=20>31>31>7/C41O/2Y*2_%3`#2Y%1N+1B3077-39+68*?5)N1)]-)e+)c;3h<3r=7z=:‚<<†<=‡;;…;:‚;9>8€A:C;‚C<ƒB<…@9„?8E/D/C.ƒ@-†=,‰<,‹9+Œ9+Œ6)Š7)†9)‚;)~=)w?(sA(qB(…6/|/'8/ƒ?4w5)s5*}A6}C7E9G<ƒI>„J?…K@‡LDŠOGŒSJycL~hSoYu]}bˆi„•u‚ |¥~|©€~¬…­†€ª„¥€|ž}{˜yn}ŽlyŒlwŒkwŒmt‰joƒgl~dbqZ[hTSZHIK=B@4=6,8/&5+":&(8%'6&'2&&0(&-)(++)).*'+*&,*&,*'+*'+,)*,**,**,-#$2*(50,85,BC5UZFfpWn}^tˆcqŠbt‘ex˜iw›ks™hs›iwŸmz¢mx lwŸkv¡ly£q{¥u{¥w|£wxžuzœww–tqŽom†hd{_WkPJ^CFB9>:195,560560671671782782872872983<94=:5>;6>;6?:6>95>95?74?74>63=52;62:5294194184184195484373243132021/6-.6-.6-.6-.6-.4..4/,4/,40-40-40-52-32-32-43.43.431431542540841850940:5/=60?6/@7.B8/C9/F90G:1H;2F<3F<3F<3F<3E;2C90B71A60@5/@51>50=4/=4/>42?53?53=82A64I35Q16V.6U-5R/5J22A62::08<.9;-?9)H6*P4)U3)]2+c4.k62t76}77‚89ƒ7978}75{:6|=8{?7@9ƒ@:…@;†?;|E0}D0€C0‚A/…=.‡;-‰:-ˆ9,‡8+…9+‚:+<+{>+x?+uA+tB+‹2,‹2,¡LE§XQŠA8|90‚F;€J>yH:zJ<{M@|NA~NB‚PE‡UJYN_uNgwRtzX€{^Š|b“i›s›—|™zˆ |ƒ¨¬ƒ|¬‚x¨~t£yq vŠpˆo†nƒŽp€p}px‹ms‡kk~bgu\_iQWZGPM0%:,+7,*5+)1,(-,'+.').((/().(+-*,,*/+*3)*6',7&,9&,2)$<3,E>4JF:QR@]bLgqVizXmƒ]j…\j‰]p‘bq•eo•do—eršhu krhq›itžlx¢rz¤vy¢vyŸvvštw™tu”rokj…fc|^UlOJ^BHA9@91;4,671782782782893893983:94:94=:5>;6?<7?<7@;7@;7@;7B:7B:7A96@85=84=84<73<73<74<74<74;74:6395284173080.80.80.80.80.80.61.61.61-52-52-52-63.63.54/54/540540651952:72=84=82@93?80A8/C90D:0E;1H;2I=1I=1H>4H>4H>4G=4F<3D:1B8/A60B71@70@72?61?61@72@72A83=84@85B86D97E:8G96G96E:4C90B90B:/B:-D;,F:*H;*H;*].&b0)n3/x73ƒ98‰;;Š<<‰>;‹A>†A<?6}=4~;3‚;5ˆ=8Œ>:~C3€B3€A2ƒ?2ƒ=1„<0ƒ;/;/;.|=.{=.|>/|>/|>/}>/}>/—.*£;8ÎkfÙ~y­ZTŒC<ˆLAN@tJ:qM=pQ?qR@tSB{VD‚[J‰_OUOe€Uz~[‘y_¥ra³of»rk»xo¶…vªz ›~•£€Œ¦ƒ¦~}¢yyŸvŒr‹rˆ‘r„“r€•t|–sv”ps’pl‹ig„eby\\lQU_GMP;ED0A<)>3-<3,92*41(01).1(+1'+0)/0*2/*6,*:*+@'+D%+G$+H#+A7+LC4WP@[XE`bLgmQiwVj{Wl‚[g‚Wf†WjŽ^n”an”an–bršfržko›hnšiqœnw¡sy¢vxžuu›ts—su—ts’pn‹li„cb{[TmMH`@MD=E<5@707827828938938939:4:94:94;:5>;6?<7@=8@=8A<8A<8A<8A<8A<8A<8@;7?:6>95>95=84>95>95>95>95=84<73:51940:0.:0.:0.91.91.91.91.72.61-61-63.63.63.74/74/74/540651961;83<94?:4@;5B;3A8/B90C9/E;1H<0I=1J>2K=2K>5K>5J=4J=4F<3E;2C90B8/B92B92A81@72@72@93A:4A:4?74>95=<7>?7?@8@@6D@5J=4J70N5.Q6-Q6+O8*M:+I<)H=)l3(r6,~;3‰@:•DA›HDŸJGŸLH QJ—MDD;„;2‚8-…7-Œ91;4…?7…?7†=6…<5ƒ=5€=4|>3y?3vA3uA3uA3y?3}=3ƒ:3‡83Š73Ÿ%$´<;í{zþ•’Åhc–G@‰K@wI:mNfW@jX@r\E}aL„eQj{O{{U™w\´l`Ì^_ÚR\áM[àO^êmuÜxxÎ…~¿€²–€§—}ž•x˜“u•Žr”r‘‘u”u‡–u—s{–sx–rq‘lp‹hiadtW]gLVX@LJ3GB.L40H3.D3,?2*:1(70&40'40'81):/+?-+C++H(+M%-O$-Q#-PE1[P:d^FgfJilOnuTm{Wl~Vk„Zg„Vg‡Vm]p•ap—br™dvhrœlo™km—ip™mwtyŸxw›wt–us•tu”tsqoŠki„cb{[TmMGa>SJCKB;F=69:49:49:49:49:4:;5=<7=<7=<7?<7@=8@=8A>9C>:D?;D?;E@8C>8D=7B;5B;5B;5B;5B;5B;5A:4A:4A83A83A83@72@72>71>71>71<71<71;60:5/85085074/74/761961961:72<71=82A:2B;1C:1E;1F<2J>2K?3L@2N@3N@3M@7M@7L?6K>5I<3F<2E;2E;2B90A81A81?80?80?82@93@93<5/LE?IB:E<5OB:K:2J3+\>6Z5-`5.`4+^/'\0%b8,g@1gB2‹I;G;–I?žLAŸF>›>7š=6žD;¥ND£QE¨VH«YK£PBš@5˜:0ž=4’9;9:Œ67†54„96ƒ@:{@8o?3oC6lB4m?2u:274Œ35’-3–(1ÏEEèbaÅEDÍWUáyv«VO†F<‚WGlS=f\CedFgfHgbEm_DyeL†nVŽdK­p]ÍphÞW]å8Kð(Dü&Hþ+Lþd02b22\31L)'D'#I2,J70F5.E2,E0+H0.I-,I)*O+-V24VK/`W:f_BgdEkoLu}Xu„]oWj„WlˆXnŽ]q“`s•bu˜bušdv›eq–ks˜ms˜oq•os•rw™xz™zy–zx•yqŽrm‡jj„ghƒdazZTnKIc@TKBSJAPG>9:49:49:49:4:;5;<6>=8?>9>=8@=8A>9A>9B?:D?;D?;D?;FA;E@:E@:E@:D?9D?9E>8E>8E>8E>6E>6D=5C<4D;4D;4C:3B92B92B92B92A81A81@91@93>71<71;60;60:5/85.74-74-96196/96/;60<8/>:1A:0C:1C;0E;1G=1J>0L@2M?2NA1NA1N@5N@5M?6J=4I<3H;2E;1E;2C:1B90A81@91@91@91?;2?;2C:3G81I0,V..j68u99{;;†ECƒD?„H@…I?†G>ŽJA›NH£PL¥MK’E3”C2šB4 B6 >36-7+¡<0£C5›@.™@. E3¦F6©E5¯H9¸N@´KR¯GN¥@F™9=‘8:Š?<€A:r@5k?2uK=€NC@:‚,-“(0µ8FÒK\àJIáMMÌ>=Ã>?Ò_\µXQ„@5€UDvbJa]@Z_?ekIonOshJ{fK†kPÌ]VÚ][êSZó7SD=]P.dY9ga?ifCnrMz‚[z‰bt†^r‰]oŠ]oŒ^qŽ^u’bw•cw•cw•cr’mw—rz˜vy–w~˜}ƒ„…‡ƒ›…™ƒz’|q‰ql„jhc`yYTnKJdAWQEVPDUOC8938938939:4;<6<=7?>9@?:@?:B?:C@;C@;C@;D?;D?;D?;FA;FA;FA;E@:E@:G@:G@8F?7IB:HA9H?8G>5F=4E<3E<3D;2D:1D:1D:1C:1D;2D;4D;4C<4?80?80<71;60:5/:5/94.94.96/96/96/;7.<8/@9/A:0C;0E;1F<0I=/K?1M@0M@0NA1M@0N@5M?4L>3K=2I<3H;2E;1D:0C:1C:1A:0A:2?;2@<3@<3A=4SE–I?•MA›OB¬RJÃSRÏNSÒENœE2B0 @0¥?1¦:-¥7*¦8+§=/¬E4¡>+˜7$:%¥>+®@/³B2¹C5§/8±9B¹DL¾KR¸NRªLL“B>}:1u;/q9,s5*2-›47º8@?:A@;BA4G=3F<2E;1D:0D:0E;1E;1D;2E<3E<3E<3@91?80?80<71;60:5/:5/:5/96/96-;7.;7.=9.@9/C;0D<1F<0F=.J>0L?/M@0M@0O?/O?/O>4O>4N=3K=2J<1G:1G:1D:0D;2D;2B;1B;1@<3A=4A>5A>5Q9/X+&‰:?ÅP`ãOeñOfíPcÐGO¢20”:/Ž?.–C3®F=ËFGÞ>Hã2B§H6§F5©B3®@3°?1²>1³B4´D6²G5«B/£<)¤;&©<(­:(¯5&®3$¸7<»8>½7>½6=¿9@?:BA4G=1H<0G;/E;/E;/E;/E;1E;1D<1D;2D;2@9/@91@91?82<71;60;60:5/;7.;7.;7.<8-?8.A;/C;0D4N=3N=3J<1I;0G;/F90D:0D<1D;2B;1@<1A=2A>5B?6C@7_4-t42¯KSâYiðH_ð:Qá2C½#+¬/)š9(;&•=)¬@3ÈA=Ý:?ä0;¨D4¨B3«?2®>2´?5¹C7½G;»J<¬>/ª?-¨=+¨:)ª9'²:*¹;-¼ÃLDËTLÑTNÙKJÝ>Cã3>è.<Ù5+Û7.Ò0+Ò94Á82µ@9µ[P”UDxO9~dI„lPbF]F®eTÍqdÛsjübÿ?eÿAiÿBkÿBmÿAmÿ@oÿ@oÿ@qÿAqÿBnÿ=hÿEmÿJpöGhíMièZrÛbs½YcŒ@D]($M-"PC2PR=CO76H.WH1eYCujT€{gŽy˜œ‹”Œ‡”ƒ~‰—ˆŽœŒ™ˆ‡’‚Š“‚—žŽ¤¨—²¶§¸¼®¿Á¶ÀÁ¹ÂþÅÅÃÃÃþ¾¾²´³¢©¢—Žy‡vh{e\sWTmONiHTYBUZCW\E560560671782893:;5=<7>=8@?:B?:C@;DAGB>GD=GD=HC=ID>IE0I=/G>/G>/F<0F<0E;/E;1D<1C:1B90A:2@91@91?82<71;60;60;7.;7.;7,<8-?8.A;/D0K?/M@0NA0P@0O?/O@-P>2N>1M<2L;1I;0H:/F90C9/C;0B<0B;1@<1A=2A?3B@4C@7t50–FEÆY_ßUbã@Qä5FÚ0;À*+¯1%Ÿ9#•;!”: ¡=&·=.Æ90Ê2- :,¢:-¥9-¨6,°91¸A9»E;·E:­?2«@0§<,¤6'ª6)·=0ÄD9ÊG=¾9*Î@4áD=ïA@öDâ<@×?>ÎC>ÍJB×RMåZWéPRìELï;Gõ6F÷2Dø/Bû1Gÿ6Lø:Tø:Tø:Tû:Wþ=\ÿ?aÿBeÿDiûhú?júAm÷@nõ?oò>mï=mÿFnÿ:aÿ>dÿInÿJløMmòSoæXnëp‚Å_j˜ILt:6\6-O9+OD2SN:`PArdWˆ|p”Ž‚Ÿœ“¦§¡¡¦ ”˜”Ÿ›¨¤¦¯¬¦¬ª¤¦¥§§¥µ´°ÄÀ½ÍÉÀÒÍÇÕÐÌ×ÏÍÖÍÐ×ÎÓÑÊÑËÆÌ¿½À°²±˜Ÿ˜€Œ€m~k^u[VoQSlNU_DV`EWaF560560560560671893:94;:5=<7@=8A>9C@;DAHC?HC?GD=HE>ID>ID>JF=LE=MF2G=1F<0D<1D<1C:1B;1A:2@91?82?82<71<71<8/<8-<8->7-@:.B:/D2B@4@@4+)¨JKÁSV¾=BÀ/6Ç.3Ä./»0)ª1 £9!›=!–=˜= ¡=#¥;#¦6"6- 8/¢5.¦3,®71·@:¹B<²@6±B7­A5¨7È`UÑq¤eSŽWC‡N:¡XGÊe[ãa_ëPTëBIùDKí@DÞ@?ÑB<ÅB8ÁB9ÌIAßPLìKPô@Kù9Hý7Hþ5Hø3Eö7G÷=K÷9R÷9Rø7Rú7Uý7Xÿ9]ÿHC?ID@HE>HE>ID>JE?JF=MF>MF2G=1E=2D<1C:1C:1A:2A:2@93?82<71<71<8-<8-<8-?8.@:.B:/D2??3@@4”67Á]_ÈZ[¯78®,,µ/,±,#°0#¯8$®B(©G* G'šF$šF$–C!”? Ÿ81£;2¦92¨50°:6¹B>¹D=±>7«<3¨<2¦»72»:Ê<$á:*ñ.(ÿ$&ÿ'ÿ'ÿ%ÿ%(ù,)ñ2*ë5*è3(è2'ê/&ì-%Ü=(Ñ2Þ>0Ñ5)Ê7/Â?7¯C9Çqd²m]–YF™VE¿i\ÝlfãSSë@Hù?Lï4¹6,½4.Î44ïBHø8Gÿ2Fÿ3Hÿ5Iú7GöYÿ=Xÿ:Wÿ6Wÿ5Yÿ5\ÿ6_ÿ7eÿ;kÿ:mÿ;oÿtû>vôEbýNkÿTqúIfð?\ÿRqÿfƒÿf€ô^wêbváky×s{Ärvªfe”ZV‰TN’€~¨™–¾°°Ä»¼ÆÁÅÈÇÍÅÈÑÀÄÏÆÌØÈËÚËÍÜÓÐáÚÖåäÜëêßïîáòòäãõççöçêóâèñàêïßêìÜéå×äÓÉÒþĪ¬©—y‡vi|f`w[\uWbqRapQ`oP201312423653875984984983;:5<<4==5??5AA7CC9EE9EE9HH@HH>HH3B90E<5C:5@85?74@86?67>56:44F85E76B87@78>:;<:=<<>==????A@,§B0©D2©D0©B/¨?,«>*­<*µ=-¾C4ÅF7À>0·3&Í6+Ì8,Ì:-Ì=/Ï=.Ô(Þ9%Ô4Ï4 Î9%Å8&¾6&Æ@4ÕQEÒIAÜMIïUUüVXýJPø9Aü4?ÿ9DäCHßCFÓAAÆ?;¹=3®=/ª?/ª@0¿Q@ÉQCÑLCØC=å??÷@Eÿ>Gÿ8CúGMúENûEQþESüARú=Sü>XÿCbÿGiÿBhùHH7H?8F=6C:5C<6A:4?74?74@85>95=84;63>3/=4/>42<74=98<;9=<:>=;@?;C@9G@6J@4L@0O@-P?+P>(=B,?A,E=0H92K63J46F35A57>=;8=69?5?A4C=-J9)^B4sRC¼K=¬;- 2#¡6&£:'8$ž9%£?(¡;%¦=(­@,³@-¶=,·9*¸6(¹5(¦;+¤:*£9)¥;+¦?.©B/«B/«@.­?.«:(±<+¿E6ÆH9Á?1¼8+½7+Ï5+Ï7,Î:.Ï;/Ó=/×;/ß8/ç4/ð0-õ--÷-+ò/+ê4)ß8(Ö;'Ï=&á:'Ù7"×8%Ô=*Ì;*Á5&Ã;/ÍG<ÐG?ÙJFèPOóPQôGKò;@÷:Aÿ?GàDGÜDCÓB?Å>8·;1¬;-ª<-©>.µF5ÅM?ÓNEÜGCã?@ñ>Bý>Fÿ>H÷DJ÷CLúDPÿFTýBSú=Sü>XÿBaÿFhÿCiü?iù@lùBpûGvüJzþL|ÿIxÿHtõKpðRsò]zö`{ùXwýMqÿCkÿAlóCjÝJgÉ^p®pugNI†‚v´”‡Ì²¥äÔÇëäÜèéäéêîéçòíáõöâûýàüÿâýÿçþÿìÿÿòþÿ÷üþúûþûöýúõü÷ôúôôøïðôëîñèëïæëäÞâÜÖØÊÆŲ²°ž ›Ž“Œˆ…ˆ…–†‰€†}/.,0/-10.21/43/540762761:94::2<<4>>4@@6BB8CC9DD8IF=IG;JH;KJ8MJ7NL7NL7OL9KI:NKBTSQ_^dihxmm…lkŠihˆcYd[QZQGPJ@IH>FG>CC=A@::1>:1=90:3-94.;60=82=:3>;4?<5?<3C?4F@4I?3L@2O?0P?-Q>-P>*3@&7?'<=+A;-B8/A62>42;31=85B:7H94O2.[+)o-.Š:= EJª9+¢2$Ÿ1"¤9'¥<)ž7$8$¢<&¤;&¨=)±A-¶A/¹>.»<-¾:-À:.®>0¬<.©9+¨:+ª<+¬>-­>-¬=,²?-®9(¸>/ÊL=ÊH:¼6*º2&Å;0Ó5*Ô6+Ò8,Ô:.×;/Û9.â7/é2,ñ/-õ.+õ.+ñ0)ç2'Ý6&Ó8$Ì:#à7$Ü5#Û8'Û>-Ó=.Æ7)Å8.ËA7Ç<5Ì?8ÙEAåKIìIJëCCí?Að@CÜDC×C?ÏB;Â=4¶:.­9*ª;*«<+ª9)¿E8ÔNEÝIEâ?@ëXÿ@_ÿDfÿCiþDmÿFpÿIwÿK{ÿL|ýK{ÿCvÿGwÿJtúNtþZ|ÿa€ýUvòCdüHkÿRvÞ=\ÎH`Úz†µ}~\F;„r³‹Õ³§óÛÑúíåøóðøøú÷ôýôëüüêÿÿéÿÿëÿÿíÿÿòÿÿ÷ÿÿûÿÿýþÿþúÿýùÿûøÿøöþõöýòöûðôúïóðçêåßáÓÏξ½¹­®¨¢¥œ£™£—¤ªœŸ¥—œ¢”/.,/.,0/-10,21-32.54/650872991;;3==3??5AA7BB8CC9IE<0?=1@<0?<-A;+F?/H?.K?/M@/O?/P?/Q>/P=.<@)=?*?>,?<-?;0=:3;:5:94<94D95N43[*-o&--8¨3C¶7H§7)¥7&§9(ª?-¨?, 9&Ÿ9#¤;&¥:&«<)³>,¹@/½>/Â<0Å=/Ç=0¹@5¶=2²:,®8*¯9+°:,²:,²:*¶;,¹;-ÄB4ËE9Ç?3¾1'À2(Ê:1Ú3+Ø4*Ù7,Ú8-Ü8.ß7,æ3,ì1,ó0,õ.+õ.)ï0(æ1&Ú4$Ñ6 Ê8Ü/Ú0Ú4$Ý;,Ø4¾Vßetû §Í‘]=2aP@©wlÑ¥œöÔËþêãÿôòÿþÿÿüÿùóÿüïÿÿïÿÿðÿÿòÿÿôÿÿ÷þÿûýÿüûÿýùÿüøÿúøÿù÷ÿö÷ÿôøÿôøþó÷öëïìãäÚÔÔÉź¹´³´¬±´©²µª¶¾³°¸­¬´©10,10,0/+0/+10,21,43.54/77/880991;;1==3??5AA7BB8KD:LF:OG:QJ:RK9SL9RM:QK=OKBVTUfdowx††¨»“ÃŽ‘ÆŠÀ‡‚¸{w©rlœid_[~UPnNJaJGXEBM?=B;7696196-86*86)581692891;;/><-?<+C<)D<'I>*J?+L?,M@/M@0M?2M?4L>3M?4K?3F<2B90=909:25<44>57<5>:1H3.\0/{48œ;D¯9E²2Aª<+ª<+«@.¬A/©@-¥<'¥<'©>*§8%­:'µ<+¼=.Á;/Å;.Ê<0Ì<1ÁA6¾>3º:/·7,·7,¸8+¸8+º8+»7+ÇA5ÍC8Å8.Á1&Æ3)Ë7-Í6-à2+ß3)á5+â6,ã5,ç4-ê2*ð/*ö/,ø.*ô/)ì0'ã1#Ù4!Î6É7Ú/Ù/Ù2"Ù5)Ù9-Ô:0Ö?6ØE=ÕF>Í@9Ç<5Ë@9ÖKDÙNGÐF<Å;1Å=1Ä<0ÀCí>EóBJûJTÿJYýFXúCYýB]ù@_ûBdþFjÿJsÿOxÿOzÿLyýIxÿGwÿRÿQ}ÿIqûImÿStÿVtøNiëD^äF]èYkÿ—¢ÿ¶¼î žˆKFd2)©jcÍ–ôÇÁÿãÞÿòðÿüýÿýÿú÷ÿý÷ÿÿöÿÿöÿÿøÿÿùÿÿüÿÿýýÿýúÿüøÿûøÿúøÿø÷ÿ÷øÿõ÷ÿôøÿôøýñóóéêäÜÚÖÑÍÍÊÃÉÉ¿É˾ËÍÀÇÑȾȿ·Á¸84163.52-30+30+41,52-63,85.96/:70<90>;2@=4B?6B?6KC8ME:PF:SJ9TK:UL;SL<=;:6;8396/267465672880<:-A<)D>(G?(I?&J?)IA,JA0IA4IA6HA9G@:R9?ž46§<*¨=+ª?-ª?-©>,©>*¬?+¯@-«8%²9(¹:+¿:+Ã9,É9.Î:0Ò;2É>7Æ;4Ã81Â8.Â8.Ã9/Â8.Ã6,Ä7-ÑC9Ò?5Ä0&Ã,#Ð7/Ö<4Î4,æ1*æ1*ç2)è3*ê3+í2+ð/*ó.(ø.*÷-)ò/)ì2&ã3$Ø5"Ï7 Ì7Ü5#Ù3#Ø2$Ö2&Õ5)Õ7,Õ;3Ö?8ìYRáRJÓHAÊD;ÉF<ÊJ?ÅG;½?3¼;(¼;(º;*¹:)·:(¸:+¼>0¿A3ÁA6Á<5Å<6ÏA?×EEÝGIãJMèMQëADì?EðCIúJTþN[üJZüF\üF]øA]ùBaýEiÿJpÿNwÿOzÿMxÿKxÿR{ÿR{þOvýOtÿVwÿ]{ÿSoîD^øUjîQd÷dtÿ’žÿ‹“òƒ‰Ç`c­KL²keÏŽˆñ¼¶ÿÞÙÿðìÿúúÿüþýûÿüûÿþûÿÿûÿÿûÿÿüÿÿûýÿûûÿûøÿûøÿüùÿûùÿûúÿøúÿöøÿòõÿðóûìïòææçÝÛßØÒÛ×ÎÝÛÏàÞÑàáÓÚãÞÏØÓÅÎÉ<94;8385052-41*41*52+63,74-85.96/;8/=:1?<3A>5B?6KA7MC7RF8UI9WK;WK;UL=SJASJK[Xcnl‚‚‚¨‘”Çš Þž§ì¡©ò¡¤óž í™›æ•˜ß”•Ö̈‰¿‚ƒ±zz rq‘fd|XWiPN\IGRFCJDBG=?K==G;:?;:8<92A;-D=*F@*F@(GA)GB.ED2CC7BC=AC@>BAG9HH,©>,ª?+­@,¯@-°?-°=*±8'¶8)½9*Ã9,È8-Ì8.Ò91Õ;3Î;4Í:3Ë81Ë81Ì92Í:2Ì70Ë6/Ó<3Õ>5Ò91Ì2*Ð3*Ù;2Ú<3Ó5,è0(é1)ì1*î1+ñ0+ò/)ô-(ö,(÷-)õ.)ñ0)ê2(â5%Ù6#Ò7!Í8 Õ8%Õ8%Õ5%Ñ4%Ò4(Ô6+Ô7.Ð7/ãNGèXPçZQØRIËH>ÃE9¼B5·?1¹<&¹<&¹<(¸;'¸9(º;*À>0Ä@4ÉD;Æ?9É@:ÑFCÕIHÖHG×IHÛJMìCFêADíDIöKSüQZýN]ûL]üJ`öD^÷DaùFfýIlÿNuÿOxÿOxÿNyðYzðWvóVuüYxÿ]{ÿZuûQkòI`ýWköUgêN\ö^kâKZçSaçSaåQ_¸jfÉ‚~窧ÿÓÑÿëèÿôòÿøùÿÿÿùýÿùüÿûüÿüüþüúûýùøüøõü÷ôÿú÷ÿûøÿüúÿûúÿøøÿòõýîñúëîðââëÝÝäÙÕâÙÒæßÕëçÛñîßóñâêóðÜåâÏØÕ@=6=:3:7074-52+52+52+63,74-74-96/;8/=:1?<3@=4A>5M@7OC7RF8WJ:XK:YL-C@-CB.BC3AE7>E=€UE’YFL7A+“A+«@,®A-®A-®A-°A.²A/²=+°7&µ7(¼8)Â8+È8-Í6-Ñ7/Õ8/Ù;2Ò73Ñ61Ñ61Ò72Ô94Ô94Õ81Ó6/ÞA:Ö8/Ñ3*Ø7/Þ=5Þ=5Û8/Ù6-ë0'ì0'ï0(ò/)õ.)ø-)ø+(ø+(ø-)ô/)ð1)é4)á5'Ù8&Ó8$Ï8#Í8$Î9%Î7$Ï6&Ð7)Ô8,Ó7+Î4*Ì3+ãNGôd\ë`YÔOFÂB9¸<2´:/·?&¸>&·=&¸;%º9&½9*Á;/Ä>3ÌC9ÊA9ÎE?ÕKHÓLIÎGDÌFEÐJIéFGæCDéDHòMSùRZùR\ùN^úOaõG^õGbøGdûIiÿNrÿRvÿRyÿRyå[uë\xõ`}ü_|øUpõMgùPgÿYnÿ[mÿbsóL]úSdøM_ÿRgüI_ýE]³d`¾tqÚš˜ûÈÅÿåãÿîëÿõôÿÿÿûÿÿùÿÿùÿÿúÿÿüþýýüúýùöýøõÿøõÿùöÿúøÿúùÿööþððøêêõåæìÜÝèÚÙæØÕèÞÕðèÝùóåþûêÿþíòûúâëêÔÝÜA>5@=4?<3=:1;8/96-74+63*52)52)63*74-:70=:3@=6B?8J@6OC7RF8VI9WJ9XK;ZL?[NHTIMXR`gd|}©’Ì—Ÿçž©ù¤°ÿª³ÿª³ÿ¬³ÿ«³þª±ùª®õ¨«î§«êŸ¡Ü™šÒÁ±ur¡he’]Z…XR~YP{YQxVOpOG_E?M?:@?;8@@6>>2@B5@F:>E=:C>9CB*®?,±@.³@.´?-¶=,¹;,º6'¿5(Ä6*Ë7-Ñ7-Ö8/Ú91Û81×84Ø95Ù:6Ú85Ø61Ø61Û83Ý:3æC<à=6Ú70ã@7þ[Rÿlcÿ]Tã@7é1'î2)ò1*ô/)õ*&÷'%ø(&ú*(ø-)ó0*í2)ã1%Ú0#Ó1"Ò5$Õ:(É=&É=&Ë=)Ï<*Ñ;,Ò9+Ô8,Ó6-Ú@8Ð71ÜGAôc^ãXQÉB<Å@9·3.´<#¶<$¹<&º<&½:(¿:)Ä<.Ç=2È>4ÌC;ÙPJßXTÓOJÁ@;¿@:ÊKEäFEäFEèJKïPTòQWïNVïKVñL\ùRdøOf÷Ke÷JfüMnÿRsÿRvÿPtê[wêZuðZuú[wÿ]xÿZsÿWnÿViÿctþVgÿ\mÿYlõDXùBXÿMeÿIb·nh­hcËŽ‹èµ²ùÑÏÿêéýïîúù÷øþüøÿÿøÿÿøÿþúþýþþüÿûøþöôþùõÿû÷ÿùöÿöôÿööÿõõöèèç×ØäÔÔÞÐÍãÖÐñçÝüôçÿøèÿüéÿÿí÷ÿÿèñðØáàC?4B>3A=2?;0=90;7.:6-95,73*73*73*83-:5/=82@;5B=7I?5LB6QE7UH8VI8YI9YK>ZMEUKLXP_ebyz¦‰É”œäš§ö ¯ÿ«´ÿ¬µÿ­·ÿ¯·ÿ¯·ÿ¯¶ü¯³ú¯²÷§ªí¢£ä˜˜ØŒŠÉ€~½uq®ie¢b^›cVŽbU‹]TƒWOtNHdFCTBAIAAA;=8@C9ß<7ß<7â=9æA=èC=éB<èA;ç@:èA9ä@7Ü8/Õ1'Ø6+ëI>þ\Qô?4î6,ê+#î)#ù,)ÿ./þ,-ø((ú0.õ4/ï7/ç6,Ü4)Ö2&Ó3%Ò5&Å='Ç<'É<(Ì;(Í:(Ï7)Ï6(Ð4(Õ8/Ï5-Õ<6åPJçSOÛLHÏA?º/,¹=%º>&»='½<'¾9(À8(Ã9,Ä:/È>4ËB:ÕOFÜWPÒQKÃD=¿B<ÆKDáIFáIFåMLëSRíTVëPVéNVìOZ÷VføUhùSiúRküRmÿSqÿStÿRsïNoøTvÿ\|ÿ^{ÿ[vÿUoýQgûReüUføQbÿZhÿZjôM^úRcÿWiôI\§ha™\W·€{Ù©¥ïÇÅýáÞùêçýøõøýùøÿÿ÷ÿÿöÿýùÿýÿÿýÿûûÿö÷üùòþùõþùõþöóÿ÷õÿõõøêéêÜÛäÖÓÝÐÊáÔÌïåÙüõåÿùçÿýéÿÿì÷ÿýèñîÙâßEA5EA6C?4A=2?;0=9.<8-;7.84+84+73*83-:5/=82?:4A<6G>5JB7ND8RF6TG6WG7YI:YKBWKKXP[b^wsuž…ŠÂ™Þ—¤ó¬ÿª´û¬¶ý®¸ÿ±¹ÿ²ºÿ´»ÿ³ºÿµ¹ÿ¯²ùª­ô££ë™—àŽŒÕ‚€Éxt¾qm·l`¢i]dY“^V‡VQyNKhEDV@@J76;?=>HBBKABN?BYFJmX_}fnt¤}¬§‚®¬}§´w ¾p—Âc…ÃRpÅE^ÔI\×EPÊ9<¾3,»7(¸;%³; ¯<*¯<*°;)³;*·<,»<-À<-Ä<.Ä6*Ë8.Ô<1Û>5á@8á>7à<3á:2Ü73Ù40Ø3/à93èA;ìE?êA<å<5ã<4Û4,Ø4*Û7-Ô2'Ì, Ö6*èH<÷I>ò@6ï4-ð-)÷+*ý+,ý+,ø*,ñ))ì/+è3,â5.Ü4+Ö2(Ô2'Ô2'Ç:&È;'Ê<(Î;)Ñ;*Ò:,Ô8+Ô8,Ñ4+Ø;4Õ:5Õ<7çONîXYÙEEÅ02¾=(¿<(¿<(¿:'Á9)À8*Á7*Á7,Æ>2ÇA6ÏJAØUKÑRIÄH>¿E:ÃH@ÚIDÙHCÝLGäSPåSSâPQâMQåNWòXdöZhý[pþZrýUoûQlýPnÿRpÿFmÿOvÿZ}ÿ[{ÿVqÿSkÿVkÿ[mûYhúYhü`mö`kî\fñenífmÚT[’cY}ND™lfØ’ß¹¶ñÓÑôàßþöôøú÷÷ÿý÷ÿÿöÿýùÿýÿþÿÿýÿÿ÷ûúúòüùôüùôýøôÿùöÿøöùîìñãâçÙÖÝÐÈÜÒÈîäØýöäÿûèÿýçÿÿè÷ýùêðìÝãßIE9HD8FB6D@4B>2@<1?;0>:/:6-95,95,94.:5/<71>93@;5E>6HA7LD7QE5RE4UF3WG7WIC_@EmDJ€OU•]f¦jrÇe˜ÍkœÏl›Ïf‘Í]…ÎTyÌFgË8UÌ0Hß>PäBMÔ:<Æ7/Ã@.ºB*®/Û?0Ü@3Ü@3Ò6*èKBåJEÎ50àFFóZ\áHKØ?BÆ=-Ä;+Ã:*Ã:*Ã:*Ã9,Á9+À8,Â<0Â>2ÈF9ÏOBÎPDÄH<¿C7¾D7ÑF?ÑF?ÕJCÛPKÝROÙMLÚKMÜKPëX`ó[hüaqÿauûWoõOgõMgúPkÿJuÿOyÿSwÿRqÿSmþ[pÿcuÿixÿguüaoôbmìelàglÔjjÉjh¼c_dVeH:_Tª‡Í«©åÇÇïÚÙÿóóùøöøþü÷ÿÿ÷ÿÿûÿÿÿþÿÿüÿÿ÷þûüôúûóûúõþûöÿýùÿûøþôòøíéêßÙÞÔËÝÓÇíæÖÿøåÿþèÿÿæÿÿçõúóêïèáæßLI:KH9JG8HD8FB6D@4B>3A=2=9.<8/;7.;60;60<71>93?:4B?8EA8JD8NE4PE1TE0VG4XH9ZMEVMR[Whkl‹~‚²‰“Ð’Ÿå™§ò§­÷©¯ù«±û­³ý°´þ°´þ°´þ¯³ý«®û¨«ø¥§ô ¢ïšœé“•âŠŒÙ„†Ó…É{u½mj­dd _a”X[†QQsNHbUFY_CRlBLEO˜LV¬U]¼[dÅ]fçJuéNxæPuàLn×FcÒ?YÍ5JÊ+?Ú5EçAMéFKÙ><Í>6ÊH8¿J6°B)·>-¸=-º<-½>/Ã?2ÊB4ÐD7ÕE:ÙE9ÚB7Û>5Û:2Ù6-Ù5,Ú3+Ù2*Ô1*×4-Û60Ý90ß80Þ7/Ý6.Ü5,Ö/&Ù5+Ø6)Ï2#Í1"Ò9)Õ>-Ó<+Ö=-æD7÷KAÿD?û56÷)-÷)-ù.2ø67í55â30Ú1,×/,×/,Ù0-Û/-ã80â:1â:1â<0à<0ß=0Ü?0Ú>1Ñ7+ïWLù`XÓ;6Ó;:èOQÞEHèOTÍ=2Ê:/Æ8,Æ8,Æ:-Å;.Ã;-À:.¾:-¾<.ÁB3ÇH9ÇI:ÂD6¾@2¼>0ÊE<ÊE<ÎI@ÕPI×RMÔNKÓKK×LOçZ`ð^hüfrÿhxü]qóOgóMeùQjÿPzÿQxÿQpûSmø\qûhxûjw÷epüfró_kí_kêkrÝsu¿lh¦f\¡l^ujXVI8kXJ–{t¾ŸœßÁÁïÕØþîïûõõúüûúÿÿùÿÿýþÿÿýÿÿûÿÿ÷ÿýÿ÷ûþõûüöÿþùÿÿúÿþúÿûõÿ÷òñèáäÜÑáÙÌðé×ÿúæÿÿæÿÿãÿÿäöùðíðççêáQK=PJ3Õ;1Ö8/Õ4*Ö3*Ø4+Û4,Ü5-Ú9/Ý<2à=4ß<3Ý90Ü5-Ü5,Ý6-Ò.$Ý;.Ü<.Í1"Å.Í8$Ð=)Ì;&Ë:'Ò9+á:1ó=9ÿ@@ÿ;?ÿ27ô+1ê,.ß+,×+)Ó+(×/.Þ44ä88è:;ó55ò64î73é6/ã7-Ý5*×5(Ñ5&Í5'çPEÿmcÛHAÈ42×CCÓ>BêUYÙB;Ô=6Ì70Æ6-Ç9/Æ<1Ã=1Á=.»9)»<+½@.¿B0¿B0¾?.¼=,»<+ÃC8ÄD9ÈH=ÏPGÒSLÐOIÐOJÔOPç_cîaiûitÿm|ÿdu÷UjõRgýWoÿSxÿUtûWpð_pñoyôy~êmsÞXaïamò`mïaoðs{숊ɂ|¥wjšyhhpYMO:^WGƒqg±•’Ý¿¿ñÔØýéëþôõýûþûÿÿúþÿýþÿÿýÿÿûÿÿöÿüÿøùÿõúýôÿÿúÿÿúÿÿúÿý÷ÿþöùðçíåÚéâÒôïÜÿûåÿþåÿÿãÿÿâøúíòôçîðãSM=RL4D=5B;3A:4@93A:4A96B:7@A;CC;IE:NG7QF2RF.UF/WH5XJ=RHFXR\jh€}§‹’Æ’žÚ–¤å¥¦ù¦§ú©ªý«¬þ¬­ÿ­®þ¬­ý«®û¨¬ö¦ªó¤¨ñ£§î¡¨î §ë¤è›¢æ™žâ’šÛŠ”Ò…Ê‚ŽÂ‚‰·‚©‡yšŽmˆšczªWi¾P]ÓKWäGPí?Hñ9Aî;6é<5âB6ÙH7ÎJ5ÅG1ÂD.Å@/ãUGàG?Ú;7Ø64Ø88Ö:;Ï98Ê66¼=.¾<.¿;.À;,Â8+Ä6*Æ3)È1&Í5*Ð3*Ñ3(Õ2)×3*Ù5,Ý6.Þ7/Ü>3Ý<2Ü;1Û8/Û7.Ú6,Ø4*×3)Õ3&Ó3%Ñ4%Ï6&Ò=)Ñ>*Ê9$À2Æ;(È5%Ó3'ç60ü;<ÿ=@ÿ7=ù27ê-1à..×--Õ0.Ü44ã9:é;=ë;>ý.4ú/3ö01î1/æ1*Þ2(Õ1%Ï3$È2#Ð>/új_ãTLÈ95Ð@@Ë:=ãRUçJEÝB=Ò93Ê5.Æ8.Å;0Â<0¿=-¹<*¼?-½@.¼?-º;(º;(½<)¾=*º>2º>2ÀD8ÈLBÌPFÊNFÌMGÐNLçbcêbføhqÿo{ÿhxøYm÷Ujþ[pÿXsü\tìbqãktç€í‰‡ãyyØ_dñhrÿl|öcsíkwø‘•é¤ŸÀ–Š¥‹z\pWFRRLÿ4:èB*âD)ÙH)ÎN+ÃO(¹L%¶H%»D&ÛWBÚF8Ú;5æ>>íBHé>Fß5>×08ÈF8ÇE7ÈD7ÉA3Ç=0Æ8,Æ3)Ç0%Ê0&Î1(Ó2(Ö3*Ù5,Ù5,Û4,Û4,áC8Û=2Ø7-Ø7-Ü:/Ý9/Ù5+Õ1'Ù7*Ð0"Ì0!Ð9&Ì9%Æ5 Ç9#ÑE.Á:&É:)Õ7+â3.í//÷05þ5;ÿ;BÿIMúGJîDDæ@@ä>>ã9:ã28á.4þ'/û(/ø*.ó-.ë0+ã2*Û5)Ô7(Æ0!¾/óeYê]TÌA<ÓEDÊ;=ÝNRïPMäFCÕ:6Ê5/Æ8.Ä:/À,¼A/½B0º=)·8%º9&¾;)Á>,²8+²8+¸>1ÁG<ÅK@ÄIAÆICÊJGå`aæ^bñdlÿlxÿix÷ZköTiýZoú^tòcuãgqØqrÝ…é”ꋇåruùq{ÿxˆõ`sßXgóŠ‘ý¶´Ö«¢¬•…TnSAS;PTCkaWž†‚Ý¿ÁõÖÛøßåÿóùÿûÿÿþÿüýÿýüÿÿüÿÿúÿÿôÿùÿø÷ÿôöüòüÿøýþøüüôÿýöÿÿöÿþôûõç÷ñáüúåÿþåþýáýþßÿÿãÿÿñýþîüýíXO@XO@WN?VM>TKñ8>æ=@ÙD@ÑHBå;Dà;BÞCGÉ99ÌB@ËD@½/-ÞHIëHKîAGï;Dì8Aé:?â<>Ú<;Ô<9ÏA=É>9ÊC=ÑLCËK@¼>2³7+¹;-¹9,¾8-Å7-Ê3,Ï0,Ô/-Ý11á34çA1à9)Ü1 á1"é8(ê;*ã6%×2Ñ2Ì4Ê5Ç4 É3"Ì3%Ñ3(Ô3)Í.(Ï2+Î6+Ì8*Ë8(Í7&Ð7%Ø6'ß3'é2,ð31ò01ð+2í*2í+4ï-6ú+1÷*/ñ+,î.-ë4.ä8,Ú7(Ð5#Ã.Ä3 çXHèZLÊ<2ÞOGÄ5/ÚIFÝQRÚLKÒDBË<8È80Ç7,È9+Ê;+È;)Å:'À9%½:&»<)º=+¸=+¶=,³9.µ;.¹=1½?1½?1¿@1Â@2ÅA4ïk_õqeêd[ômiùroécbðjiútuÿk|ûivñdmï_hòaføgjõnkîqk÷|wÿ}ƒþYjÿ[wîZpû¬±«°œaŸz]sMIZ6LR6snX£–†Ë·®íÕÓÿîðÿõ÷ÿ÷ûþøüüüþþÿÿþÿÿþÿÿýþÿæÿòàÿëâýêìÿð÷ÿôûÿôþÿóÿþñÿýïÿûîÿùèÿùæÿøãÿùãÿùáþúáýÿþþÿÿþÿÿYPAXO@XO@VM>UL=TKDë:Bè7?ä7;Ü89Õ:8Ð;7ÓF?Ç<5Å<4ÌG>ÌLAÁC7¶;,·9+¹7*½7+Å7-Ë4-Ñ2.Ø3/á53æ66á?0ß<-Þ6)à4&á6%á6%Û4"Ó4Ð:"Ê:"Æ:#Æ;&É<*Í;,Ì8,Ì5*Ö3.Ö5-Ñ7-Î8*É6&Ç4"Ë4!Ð3"Ø2$ß1(å/+ç.,è,-æ,1æ-3ç.4î*,î,-í0.é2.á3*Û5'×7'Ò9'Ó@,»*ÔE5Î?1ÙF>êWPØC?ØBAåWVâRRÛKJÔC>Í=5É9.È9+Ç8(È;)Ä;(Á:'¾;'½>+º?-¹@/¶>-²9.µ;0·=0¹=1º?0½?1ÁB3ÅC6ëi\òmdçb[ðkfõolèbañklûuvÿp€ÿo|öirë^fêY^òadøqnù|vöyuÿx~ùRdÿUríXnö¥«¥¨“X”n[tLN_;QZ;us\ª×úøàÜÿôóÿúûÿúûÿûüüüþúþÿûÿÿúþÿûüþçÿñáÿêáýçéÿìóÿòøÿóýÿòÿÿóÿýïÿýíÿúëÿöåûóàúòÝûõßý÷ßúúøüüúÿÿýZQBYPAYPAWN?VM>UL=TKCæCß>Câ;CØ7=Õ?AÏA@ÉD?Â=8Ã96ëWWàBCæ=Bé:Aæ7<Þ58Ö66Ñ96Ì;6ÕHAÅ:3¾5+ÅA5ËK>ÆH:»=/¶8)¹7)¿7+Æ8,Î7.Õ60Þ63æ87ë;;Ó5)Ö6*Ú6*Ü6*Ý5(Ý7)Ú:*Ö?,Ã5¼5¸6 ¸7"»9)¼8+¼4(º0&é=;å>8Þ=5Ô*ÓB/Â1 æTEÐ<0ÚA;ÞC?èJIòTSèVVçSSãOMÝIEÖC;Ï<2Ê8+Å6&Ä7&À7%¼7$»:'¹<*·>-µ=,²=,°:.±;/²<.µ=/·=.º?0ÀB4ÃE7Ü\Oêg]äaYñlgöpoçabìfgòkoäP`ï^kôhqòemñ`eödgûqqúzwövsÿnuõJ]ÿMjïUmñœ¡ŸžŠPˆcVoEOd=Va?ww]¯¤’âÐÄÿíæÿ÷óÿûøÿýûÿþüûÿüûÿýûÿýùÿû÷ýùãÿëÜþãÚøÞàúáèûåïüèöýëýþîýúëÿúêÿ÷èúñàòê×ðèÕôìÙùñÜýùöÿûøÿþû\PB\PB[OAZN@YM?YM?XL>XL>UI;TH:SG9RF8RF8RF8RF8RF8JF=KGÓ>@ÐFCÅA<¸71Å>:ê[WÝABä?Cç=@ã:=Û89Ó97Î=8ÌA:ÏE;Ã9/»2(À/¸9(¼8)Â8+É:,Ò:/Ù80á83è;7ì=:Ô3+Ö3,Ù5,Ý4-Þ6-Þ7.Ú:.Ô>/Æ9(Á<)½>-¹>.»=/½=2Á>6Ã>7ó?>î?<æ?7Ù=1Í:*Æ9%Æ;$È<%Ï<(Ï8'Ï2#Ñ1%Ó2(Õ4,Ñ2,Ï0*Ñ3*Ó5*Ñ7+Ï7)Ê7'É8%Ê<(Ì>*Ê<(Î=,ô^PàF<Ò3/Ò.-è?BþUXÿvuÿroÿjgö^YçPIÕA7Ç5(½.Ä8'À9&»8&¹:)¶=,µ=-±>,°<-­<.­<.®=/°<-±;-¶>0¼B3ÁE9ÉMAß`Wâa[ôpløtrå`aä]aå^dÙFVçYeógpôgo÷dlýjpÿstúxvõssûenóCXÿEbðRkë’˜œ—ƒN‚\Ql?Ri?ZhDy|_°ª”èÛËÿôêÿùðÿúóÿýöýÿùûÿúùÿúöÿøòüóîøïÔüÚÎóÒÊëÌÏìÎ×îÒàïØéòÝóöãöõãûõåüõãõìÛíáÑéÝÍíáÑóç×úõïü÷ñþùó\PB\PB[OA[OAZN@YM?YM?YM?WK=VJcî7Uí8IçAEßFAØIAØIAÞFCæAGð;Jõ9JãDI×>AÐ@?ÏJE¾?8²3,ÇD<âTPÜDCáACä>@â>?Ü>=Ô@<ÏE;ÌH<Ç=2Á7,½5'½9*¿=-¿=-»<+½<)À;*Ç;,Î<-Õ;/Û8/à70ç83ë95ã:7â64â22å31æ42ä50Û2+Ò1)É2'Ç9-Ä<0¿90¼5/¿52È<;ÒDCó57î66å61Ø5,Ë5&Ã6"Á9#Ã;#É>'Ê9&Ë5$Í5'Ñ9,Ó;0Ò:/Ï8-Í?1É;-Ä8'Ã7&Ã:'Å<)Å='Æ;&Í>-Í:*Ø>2ãB:Ö.+æ::á14å26Ò73Ö;7ÞC>åJEêQIêSHèTHäUGË?0Æ>.¾<,º<-¶>.³@.°?/®?.«=0«=.¬<.¬<.­<,±=.·A3¼D6ÆLAÞbZâc]ðnlôrrå`cå`eæ`gúixûozõltí`hñ^fÿkqÿw{ÿ{|öpqø^hö@Wý>]óOh懠•ƒX†aXuE\vIgwP‚ˆfµ±–éáÌÿùéÿüíÿýñþÿóûÿôøÿöôÿóíûìäòãÝëÜÁëŻ㾺޺¿Þ¼ÆáÀÍâÃØæÌãëÓìîÙôñÞøñßóêÛìàÒèÚÍìÜÏñáÔòçáòçáóèâ[OA[OA[OAZN@ZN@YM?YM?YM?XL>XL>WK=VJPI?QI>SK>UL;XM9YM7YM7XM;WK=ULGYSWc_nmkƒtt–|~§ƒ†³†‰²‡Š·ŠŒ¿‹ÈŽÏŽŽÔÕÓ”Ó‹Ê‚‰¿{‚¶u|²ov­gp«ck©€n~ey­ZvÏMoê?cú2Vÿ0Lû6Gð@CâGBÙLB×MCÝIGèCJõÍID¸<4¯5*ÉI@ÕLF×CAÜ>=Ý:;Û;;Ù?=ÔE=ÌH<ÇI;Á7*Á7*À8(¾9(¼9'º9&½:(À;(Ä;)Ê=,Ò<-×;.Ü8.á6.ä6/è5.ê24è.1ê+0ð/2ö37÷69î45æ21Ø/,×31Ô63Ï42Î/3Ð/5Û5?ä=Gõ,2ñ.2è2/Ü3,Ñ5(É8'Æ;&Æ>(Ä9$Æ8$Ë8&Ò:,Ø?1ÛA5ÚB5ÙA6ÎI8ÇB1¿<*½:&Á<)Ã?*Å<)Ä9&Ì;*Î6)Î0'çB<Ý1/ñ>Aå.2à'-Ò3-Ó4.Ö71Ö92Ò8.Í5*Æ2&À1#ÎE5ÆA2¼=.µ:+±9)®:+ª:,ª:,ª/«=.«<+¬=,°?/µA4ÉSGàg^ßd_èkiînoæchðjqõoxüp}ýt~õmwîcj÷dlÿqzÿw|ûsuökpöXfûAYÿ:[õKfâ}…©˜†l”ojŠXo‰ZxŠ`—r¶·˜âÜÂúôÞüúåÿÿïûÿïõÿïîÿëçúäÜïÙÐãÍÉÛÅ«Ù«¨Ó¦¨Ñ¥¯Ô©¶Ô®¼Ö±ÇÚºÒßÁàæÌêéÔòíÚòéÚïáÖìÛÑëØÑíÚÓèÛÒæÙÐåØÏZN>ZN>ZN>ZN>YM=YM=YM=YM=XL@çE@ÝJBÚKCÞHGéBLó8ÏE;ÆF9¿E6Á8(Ã:*Â:*¿:'½8%½:&¿:'Á:&Ä9&Ë:)Ò;*Ù9+Ý7+á5+ä3+ç4-í)-ò)/ù,3ÿ.4ÿ07ÿ18ÿ28ý58ú7;õ8<ò9?ò9Aô9D÷6Gû6Hü5Jø)1õ,2î02ã4/Ø7-Ï9*Í<+Ì=,È7&Ï9*Ø2á?4â>4â?6â?6ÑN<ÍH7ÇB1Â=,¿:'Á:'Å9(È9)Ç3%Ó9/á@8ëD>Þ0/á-.ì38í38×4-×6.Ù80Ø:1Õ;1Ó;0Î:.Ê:/ÖL?ÌF:¿?2´9*¯7)«7*©8*¨8*ª<-¬>/­?0­=/«<+«<+­<,¯>0ÀKAÚc[Ýc^èkiðosëhnõrzüvïer÷oyør{öjsÿlvÿvÿu}öioõfl÷RbÿA[ÿ6YôFaÝt{²›‰€¤~z›f{—f€–h‘u­±ŽÌË­áàÄéëÓî÷ÜåóÙÙíÑÎçÉÅÞÀ¼Õ·´Ë®®Å¨•Ã’”‘˜Ä“¡È™§Ë¬Ë¡µÎ§ÁÒ®ÎÙ»ÙÝÄåãÎìåÕïáÖëÚÒçÒÍäÏÊÞÐÇÚÌÃÕǾ[N>ZM=ZM=ZM=ZM=ZM=YLXL>YNø<=íA=äE?àGBãDHèAKï=Mô:OÒBAÑGDÅA<ÂH=¯;.°5É83È.,Ç)&É.*Í:3ÌC9ÂD6¸@0Ã:(Ã<)Ã<)Á:'À;(Á=(Â;'Ã8%Ä6"Ê7%Ô8)Ù7*Ý5(á3(å3)è3*û03ÿ58ÿ7<ÿ38ÿ,2ÿ&-ÿ'-ÿ)1ÿ,3ù'0ô%/ú'6ÿ+=ÿ(Aÿ:ú2ö".ô&0î+1æ0/Ú1,Ò4+Ï5)Ð6*Ô6+Ü90æ>5ì>7ë:4é61è50é61ØL?×K<ÒF7Ê>/Ä6(Â3%È6)Í9-Í5*Ô6-æC<à74à21Ò ì89ê35Ó2(Ô3)Ò4)Ñ5)Ï5+Ì5*È5+Å7+ãYNØRFÊH;¾@4¶=ê@AéBIêCMëANê>NÌA<Å@9¾?6µ?3®=/±=0¿E8ÒMDÇ61Ô;6Ï1.Í2.ÖC<Ç?3´6'·?.½6#Á:'Ã<)Â;'À9%Á:&Ã:'Ç:&Ë:'Ð9(Ô7(Ö3$Ú."à/%ì7.ô=5ø72ù30ú.-û)(ý%&ÿ#%ÿ"'ÿ"'ÿ$*ù )ú!,ÿ%7ÿ'<ÿ;ÿ4ÿ3ý)7ð".ç"+ä*-Ý--Ó+(Ò-)Ü41â62é54ï64ó55ó12ñ-.ï+,í++Õ<4Ò91Ñ:1ëTK»"Ä+#ßF>È.&Ì/(Þ<7èE@â:7Ø/,Û.*ã41é:7Ý?3×;.Ï5)Ë3&Ì5*Î:.Ë;0Æ8.ìbWàZOÈD8¹6,º:/·9-¯3)²6,¯1%°2&®2&®4'¯7'²:,²<.³=/°:.ºC;Ö\Wìppñsvøv~ûyƒõq|ÿ{„ûx€øu}üs{ÿr~ÿq}ÿlxûisøbmôI\ÿ=\ÿ8[ñ:VÖek²–‡¦}~¡i|šd}•c‡—j”ŸuŸ¥ ¨ƒœ¨„’£Š£|€Ÿvx›qw›o|r t„£w¯uƒ³y‰¹½„“¾†—¾‡œ¾‹¢½§¼“¯½š¾Â§Ï̹ßÓÇãÒËÜÇÄÖ¾¾Ê»´Á²«¹ª£ZM1ÐB6Ü?6è?8ôA=ö=;ø:<÷:@ô7½=4¶<1°õ6;ú3:û06ú-2û.3ý14þ36×4/Ü:5Ù72æDAæDAÎ/+Ñ2.Á"Ö41á?<èE@à=8Ø3-Ù2,Ý60à91Ò<-Ï9*É5'È4&Ê8+Ë;0Ê<2Æ9/ícYáXNÉ@8¼3+À:1Á;2½7.À:1Á4+¾4*½4*»5*¸6(´6(²7(°6)´;0»B9ÓYTèllïqtöw~þ|†øv€ÿ|„ûyøv~þuÿsÿo}ÿiwùeqùanöI]ÿ<\ÿ9\ô=YÕdh«y€œsu˜`t’\w]cŠ•k—p‹•p…”mp†_lˆ_fŠ\g^j_q•ey›i}l€­r„²tŠ¸z»}½‘½‚–½„›»‰›µ†¡³­¶—¾½¨ÏÆ·ØÇ¿ÖÁ¾ÒººÅ·¶º¬«²¤£\L<\L<\L<\L<\L<\L<\L<\L/ÇE5ÐG7ÚC8ä?9ó=<ú9>ü9Aú:Eò>GæAH×@EÏ@B¿<4¸90±8-«:*¨9(«:*»?3ÏF<ÙD>Ø96Ú65Ü:7ÜC=ÝOEÍI<²4%À9&Á:'Ã<)Æ=+Ç>,È=*É:)Ì9)Ï8'Ï2#Ó/#ß4*î=3ô?6ñ91í2+Ú7&Ý6&à3#å/"é-"î+%ñ,&ò+(ó++ð(+ò'-ú(5þ%8ÿ5þ2ÿ3ð(5ô.;ô4?ò8Cï;Dðå+6ñ1<ô/9ù-8ù+5ù,3ø-1ö.1ö01Ù1.ä<9Û64à;9ÿljæBAÒ.-Ð.,Û97á?<àA=Û<6Õ7.Ô6+Ô6+Ó5*Å8&Ã6%Ã6%Ä8)Ç;.Æ<1Æ<2Å;1ëaWáTMÉ<3¿0(Ë;3Ï?6Î;3Ñ>6Ú=8×<7Ô=4Ï<2É;/Â:.»7*¶6)·;/»@8ÏTMãgeíorøz~ÿˆý{…ý{ƒùzúx€ÿwÿsÿl}ÿftøbnø]kõG^ÿ:Zÿ9\÷AZÐ_c›gkŠ^e†Oh…Ol„Rt…X{ˆ\}ˆ^x„\q‚X`yO_P`†UeYm•`uœg{ j€£m­p…±tˆ¶v‹¹y‹¹yŒºz‘º~”º‘±•¬€›©†©­’ºµ¢Ç¹°Ë¸²Ì´²¶­®ª¡¢ —˜[K;[K;[K;[K;[K;[K;[K;[K;ZJ:ZJ:ZJ:[K;[K;\L<\L<\L<]K=]K=]L<^M=^M;^O<^O<^O<`P@^Q@]P@\NC\NE[NF\OI]PJ`NdcSmfX{g^‰ohœzu¯„|¸†{µ™…º¥…´¯€ªºy¡ÈxŸÓušÍc‹¾OyêAFà@@ÕA=ÌF;ÈJ;ÉJ;ÐF9ÜB:î@?ø;Aþ:Dü7õ>8ð50è-&×:)Ú8)Ý5(à2'æ/'é.'é,(é,*ç+*å(,è)1ï+7õ';ö";ú=ÿ"A÷8Gä(6ç/;ÿP\ÿ`lÿP\ò^N>^N?^N?_OB`PC`OEbM\cPdcUodZle‘vr¤~w«‚v¦“~©¬†«Â‰©ÐžÛw“âk‡ÝXuÓFfÿ=MüDPðJNÞJHÌG>ÇG<ÍG<ÙD>èBBó>Cù>Gø@HðCIÞDDÍB=À?9½A5µ=/®:+ª;*©:)­9*º<.Ì?6áFBä<;ïABíAAÞ:8ãJBæXLÔL>È@0À8(»3#Á8(È<-É:*Ë7)Ð8+Î0%×3)à8/é;4ï:3î50ë0+è+'Û4,ß4-ä2.ë31ð43õ45ö58õ6;é/4ç.6ê0=î2Cò.Fõ*Gý,Lÿ1TðPî3Dî2Aî3>ê5<æ89Ü73Ð3*Ç/$Ì2*È-(Ñ61óXT÷\ZóXVÜ@AâHHÜB@Õ<7Î70Í6-Ï8-Í9+Ê7'Æ3!³:%²9$´;(¸=-¹;-¶6)»8.Ä>5ÛNGÙEAÎ50Ð1-á>9è?:ã81ä71ð/0ï11ì42é73â92Ø:/Ð9.È:.¾6*º7-ÈIBÜ_Yënlû}€ÿ…‰ýƒõv}õx~ùzÿx‚ÿsÿj{ÿdtö_nðUeôF]ÿ6Vÿ7ZúF_ÀTRvaBJoRÿ-Hÿ:QþCTéDKÒ@AËA>ÎDAÖEBãEFêAFï@EïBFçDEÚEAÉC:¿?4º@3±;-©8(¨9(©:)®9(º:-Ë;3èIEë??î;>æ68Û2/ÞA:îZPõg[ÙQCÉA3¾4'À6)Ç9+Ê8+Í6+Ò8,Ñ0&Ü5-æ;4ë:4ê40è/,ê-+í-,ó4;õ3;ø3<þ2=ÿ1>þ0=ý0?ù0@ô1Añ2Dò5Kó5Oó0Põ-Qþ1Xÿ:dá7B÷O\ÿanÿ`nþXfùQbòEXé8Jó@Sê:GÝ2;Ò/2È3-Á9-º=+µ>(Æ9/¿2(ÙJBúkcÝLGáPMÍ<9Ï;9àLJÔ@<Ê7/Ê7-Î(«;%­=)²?-±9)®4'º:1ÊC=ÕHAØC?Ô72×2.ç;7ì:6è2.ë2-÷)+÷+,ô.-ð3/é61â:1Ú<1Ò>2Â6)º4)ÅB:×XRçjhú|}ÿ†‰þ€„õv}öyú{‚ÿx„ÿqÿh{ýbtõ^oîSe÷I`ÿ9Xÿ9[ûI_ºQNmZ:Em8ZvCa|InSv†Y|‡]Šbg‚—lœl{ m|¤o}¨p~ªo‚ªnƒ©l…©lˆ«qˆ®qˆ°r†³r„³oƒµn„¸p‡¹t‹µv‰¬tŒ¦wš¨„°´™ÈïØ̾àÏŽÃÓ«±Á›¡±ZK8ZK8ZK8ZK8ZK8ZK8ZK8ZK8ZK8ZK8ZK8[L9[L9\M:\M:\M:`J<`J<^K<_L=^M;_N<_N<^O<^O<_P;_P;aPHÿ$Hÿ0Qÿ;UñÇA6¾>1·?1¯9+¨7'¨:)¬=*²=,À>1Ñ>7ß=:ç79æ/3ã/0á32Û94åNEülaïj[ÙQCÆÍD>Á61É;7ãUQÕF@É91È8-É:,È9(È:&É;%ªB)¦<&¦<&¬=*©8(¬3(¼=4ÒMFÕGCÝEBÛ96Ü30é73í41ì/+ó2-ÿ)/ÿ*/ý--ö0/ï4/è7/ß;1Ø>2É:,¼4(À;2ÏNHßb^÷yzÿˆŠÿ„†ùzú}ƒü}„ÿx„ÿn~ÿdwù^pò[léN`öHaÿ8Wÿ7YøH]²JGcS1Al6ZtDf~NuˆZŽc…f‡’jˆ—n‰žs‡¤t‚§t§r}¨p}©n©mƒ©l…©k†§n‡ªp†¬o…¯o°l³k‚¶n…·p‡´s‡­rŒ¨wœ¬…²¹šÈƱ×οÞÐÅ·¿Ò¤¬¿’š­ZK8ZK8ZK8ZK8ZK8ZK8ZK8ZK8ZK8ZK8ZK8[L9[L9\M:\M:\M:`J<`J<^K<_L=^M=_N<_N<^O<`Q>aR=bQ=bQ=bR;bP:aO9`N8jNMgNRbQ[cWkjfuv’}}™y‘’{¯ŒËƒ‡ã{|ùqsÿgjÿTXÿAGÿ#Mÿ.Tÿ7Wù9Pé>NàEM×EHÑ?B×BDÚACÜ@AÛA?ØC?ÏB9Å?4¿=0·?1¯9+©8(«=,°A.·B1ÇC7×D=Ú64å57ã,0ç02è88Ó0+Ï5-éUKÿznæ^RÎD7É=0Ê<0É6,Í6+Ö90Ú70ß82ä71ç40é1/í10ò53ø87ÿ=ÿ>ÿ>ÿ>ÿ=ÿ=ÿ<ü=ò:ï@ð$Ið&Nï$Qó%Uÿ0eÿ=sÿgrþalôXeîR_ïQ`îM]â?RÖ1Bß:JÑ4?¿-0±-(¦5'ž>&–C%E"¯7&²9(ÒWHº<0ÁA8º7/º3/ÍC@ãXSÕHAÈ91Ä6*Å6&Ä5$Ä6"Ç9#¦B*¢<%£:%§<*¦7&©3'½A7ØSLØIEáGEÞ:8ß2.ê41î1-ï.)ù4.ÿ'-ÿ',ÿ)+ö*)í-(ä1*Ü5,Õ9-Ð>1½3(¼7.ÉHBÙ\Xôwuÿ‰‰ÿ‡‰ý~…ý€†þ†ÿx„ÿl|ý`sõZlïXiãHZóE^û4Sÿ3RóCX«E@\L*?j4Uo?d|LwŠ\†“h‹–l˜pŽtŽ£xŽ«{†«x©t|¨mz¦i}¥g¥h‚¦h…¤k…¦m„ªm‚¬l®j}±i€´lƒ·oˆ·sˆ°tŽ¬xœ®„²¹šÄ«ÐǶÖÈ»²½Óž©¿‹–¬]K7]K7]K7]K7]K7]K7]K7]K7^L8^L8^L8^L8^L8^L8^L8^L8\J>]K?]M@\L=ZM=ZO=\Q?^SA_T@_R?^Q@aQAcRBdQCdNAcM@pKEjKIfOUgZknl„v|ž}†¯ƒŠ´Š…®Ÿ‰­¸Š¦Ìƒ”Þ{~îumøl]ûfRðN[æDQä>LéANïCQí>Ké:Gê4Á;/¼8+ :$¬C0¬=,®6(Â?5ÑD=Ð;5Ó61Û83Ü71Ý6-Ý7)Ü9(Ý='Ù;"Õ7à74õPLõXOÛD9Ç8(Ì?.ÒC3Ñ;-Ò4+ðGDâ.1ï4;ö4?ï+9ÿ@Qí(9þ&+ÿ*-ÿ*-÷"û#$ÿ()þ((òð"ú+1ì )î&1ò.<ç$5ÿYnë+@ÿ`jÿ^iÿYcûT[öPTìHIÛ@;Ê:1ÅA2½F2®D.Ÿ;$”5–7#˜;)œ=+§81«83ÁEC¿;9¾23Æ45È44×CAÜKFÚKEÑD;È:0Ä4+È4*Ì3+Ì2*·?1³9,®.#­'¶,"Æ7/ÓC:ÚG=äPFßE;Ù80Ü1*ç/-ô01ý/3ÿ.4ò14ó12ô01ó/0ó0.î1+é4+à8-Ö=/¾2#¾?0·>3Õ`Wçtqÿù…†ôŠŒþ…Œÿwˆÿe}ÿ[wÿXuÿSoûJgûDcö7Y÷9]ç>[Ú]k„C=PI/F`;Xw^N?^N?[N>ZO=\Q?^SA_TB]QA]P@_OB`NBbPFcOFcOFkLGjMOgS\h_rnoŽw~ª~ˆ»…ŠÁ›–Ì¢Œ»«£»wŽÕx‚í|x÷uhöjYüZgóN\ìFRòHUöJVõERï?Jë;Eä9Aà:>Ú::Õ=:Î?7Ç>4À+ª?-¨9(²:,ÁA6Å<4Ç7/Õ<7Ó40×4-Ø4*Ø4(Ú7&Û:&Û;%Ù;"Þ52æA;ëMDàI>Ð>/Ç8(Ê8)Ó;.Ý<2öJFæ/1ò5<ø6Aò.<ÿ?Pì'8ö$'÷%(û),ý+,ü*+ù'(ø((ø*,ð$'í%(ê%,þ:DÚ'ð4CüATÞ#6ÿluÿblþZcüW]õOSæBCÙ;8Ñ>6¾8,¾E4¹H6¨?,–1)Ž()ž-'°:6ÑTRÎHGÃ54Æ45Ò<=ëWUØGBÖGAÏB9Ç9/Ä4+Ê6,Ð7/Ò5.Â?5À:1À5.Â3+É4.Ð83Ø?9ÞE=ãJBÞA8Ù6/Ü1*æ0-ó11ü03ÿ.3ò14ó12ô01õ/0ó0.î1+é4+à8-×>0¿3$¼=.¶=2Ó^Uévsÿù…†õ‡Šþ‚Šÿu…ÿe|ÿ[vÿWtÿQoþIhúAaö8Zö=_æF`ÅQ\{?7NH.Ga>Yx=e‡Ks•Yx›awbz¢f|¥i}¦j|¥i|¥i|¤h{£e{¡d}¡c}¡c¡d{¤l}¦n}©l}ªi}ªe}­c¯c‚±cƒ±f‡²k‡¯pˆ«u‹«|¬„©‰‹¤†z…‡doqR]_]L8]L8]L8]L8]L8]L8]L8]L8]L8]L8]L8]L8]L8]L8]L8]L8^K<_N>aP@`P@]P?[O?[O?[RC[QE[QE\OF\OG_PKcQOfTRhTUiTQiVXi]kmi„sv¡zƒ¼ŠÍ‰Ö—‘ÙŸ‹Êª‚¶º}ŸÒ‘烅ð~tïveÿ`k÷S\íGQðFQöHR÷EQô@Kî=Gå6=à7:Ù99Ô<7Í@7ÅA4½?0¸=-©@-¨=+ª;*¸B4ÅI?À;2»0)Ì92Í6/Ò5.Õ7,Ù7*Ù7(Ú7$Ü:%Þ<'ß3/Û4.âA9éOCÜH:Ç6%Æ3#Ù@2á>5õHDé13ó4;ú6@ø4@ÿES÷3Añ),í"&î#&û03÷--ï''í%%÷12ì(*ø7:è+1â)1ë3?ÿR^ï=KÿYiúafñV\îOTðMRêEIÞ:;Õ74Ô?9À6,¿?2»C5²>1ª8-¥3)Ÿ,%œ' ˜% §0*ÆFCÂ::¼,,È44×ABô^]Ò>:ÒC;ÐA9Ë=3Ì9/Ô=4Ú@8Ý@9ÙA>×=;Ü>=ãA?ã?>à;9ã?=ëIDàA;Û=4Ø5,Û2+å2-ð31÷12ú/2ó04ô02ö01õ/0õ/.ð0+é4+à8-Ø?1À4%¸9*´;0Ð[Rízwÿ’’û‡ˆøƒ‹ü~‰ÿr‚ÿcyÿZtÿTqÿMmÿFgü=_ø:^ôBbåQg§?Fn<1OK2KcA[z?h‡Lr“Zu˜^tš_wŸc{£gz£gy¢fy¢fy¡cx byŸb{Ÿa| b}Ÿby¢j{¤j{§h{¨e{©azª^|­^®`…³hŠµnŠ²s‰¬t†¦w‚žvy“pn‡gVb`COM4@>^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^L6`N:aP<`Q>]P?ZN>YPAXPEXOH[RM_UTcWYeX_iYcl\fm]hlbclemolrtšx¶~†Ï„ŒßŠŽç‹‡ÞŠÙ¬‰É³­½y’Í{ßyê†vÿnrÿbgùU\öLUöFPöBMó>Gð;Dæ5;á7:Û97Ò=7ËA6ÄB4»B1·?.©;,­=/¯>0»G:ËRGÇH?¹6.º1)È91Í81Ó;0Ú<0Û;-Ù6%Ü6&à9'á40Û2-à=4ëOCãK=Ñ;,Ð8*àB6Þ7.ð>:é/0ò16÷4<ü8BÿNZÿKWý>Cò38â$&í/1ê,,ð22ç+*é0.ò::Ñæ37Ü-2ç9BïENÿYcôLYÔ?AÚADßCFá>CÞ9=Ü89Ø88Ó:5É83Â91½:2ÀA:ÍNHÖVSÐNNÆAB¯82µ:5ÏKGØNLãQRïYZêRQñYXÉ51Î>6ÑC9Ð@7Ó?5ÚA9àC<àA;íCñ:?é58í=?øLJà93Ú70Ø4+Ü3,ã5.ì30ò21ô01ô04ô02ö01ö.0õ/.ñ0+ê3+à8-Ù@2Â6'µ6'²9.ÉWMî}yÿ“’û‰‰þ€‹ý{‡üoücwÿXqÿNmÿFhÿ?cþ8\ù=`íIdÙYhˆ25d<0SQ8TgG`}Ej‰Ps’Yt•\u˜^wby¡ey¢fw dv awŸavž`xŸ`zž`{Ÿa| by¢hz£g|¦fz§bz¨_z¨]|«]~­_†²eŠµmŒ³rŠ­s†¦u€œstŽii_RaZDSL8G@^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;_K2_M5aO9_P;\O>ZN@XPEXQKYQO^X\g`hnfsshysg{sg}tfnnzor…rw•v|¬y‚Ã~†×ƒŠåˆ‹ì’뛌ߞƒÆžt¢¡kƒ®mq¾vjÈ{iþllÿklÿfiÿ]`üQWöEMð;Bí5=è59ã68Ý98Õ>7ÎA7ÅC5¼C0¶A-¬8+´@3¯;.°;1ÇRHÓ]SÈNCº;2¾90Á7,Ì9/Ö>1Ý=1Ú6*Ü4'á7(á2-ã60ä=5åE9âF9ÜC3ÝA2á?2Û0&ì62ì0/ð-1ò-4ú7?ÿOYÿZdÿ[_ÿOSá.1ã03ß--÷EEè66Ü,,Û-.ë>@Û25Ù37ÿchÞ=CÊ*2Ê-4¾()Ô;=àAEÚ7:Ù37á8;Ü89Î..Ì43Í<9ÓHEÝSSì`c÷hnõdkî[e¿B<ÆE@å^[÷igÿopÿjjåKK×=;É4.Ñ>7ÕE<ÖC;Ó?5Ö<4Ø93Ø7/ö0=ò,9ó+6õ-8ò*5î+3õ8<þJKà3/Û4.Ø4+Ü4+â5.ê40ï4/ð3/ö/4ö/2÷/1ø-0ö..ñ0+ê3+â7-Û?2Å9*²3$±8-ÃNEî}yÿ’‘üŠŠÿ}‹ÿw…ùl|öatùUmÿHgÿ>bÿ8_þ4\õ@aâMcÂWap/+\A0XX>]lMbIl‰St’\u–_v™_xžcy¡ex buŸ`uŸ`u_vž_wž_zž`{Ÿa| by£d{¥f|¦dz¨`y§^y¨Z{ªZ}¬\€¬_…¯g‡®m‡ªp…¥sƒ t{•nrŠffvi[k^RbU_N<_N<_N<_N<_N<_N<_N<_N<_N<_N<_N<_N<_N<_N<_N<_N<`L1aM2`N6^O:[N>YOE[RMZTT_ZahbprmzuŒ{t“yr“zp“yo”ov’pyšt}¨w€·zƒÈ~…Õƒ‰á‹‹å”ã—ŠÒ™„¼¡ƒ§ª„“«~yŸl[ŽX>ÈH?ÕPIäVRìVUòRRôJMî=Cè38ì7<ç9;à;9Ø=8ÑA8ÈC4¿B0¹@-³9.ºA6«5+£.$¼J?Øh\×eZÊVI·=2¸6)¾4)Î:0Ù;0Ü5,ß3)ä6+á/+å61ã;2Ü:/Ü?0ãF7ãC3ß9+ß1&ê3-ð31ï-.î*.ô17ÿEJÿS[ÿ_dÿ\aâ9<â9<Õ+.ôJKâ89×//Û55Ì()Ë(+÷YZÛ?BÔ9=Ð7:· %Ã))Û=>åBEÝ49Ù,2Þ17Ú/5Í(,Ò37äKNöaeûhnùcl÷_kû_mý_nÒNIÔOJè]ZêVTçMMãGHÑ32Î31ÙA<àKDãPHßKAØA8×:3×50Õ2+ÿ,;þ+:ü(7ø%4÷'4û/:ÿ=CÿILà1.Ü3,Û4,Ü5,á4-ç4-ì5/ï4/ö/4÷/2ù.1ù-0ø..ò/+ë3+â7-Ù=0É;-³1#°7,¹D;ìyvÿþŠ‹ÿyŠþqõhxó`söTlüCcÿ7^ÿ3_ÿ3\óDcÒM^ JMb6+TE0W[@^kMc~Kk‡Tt‘[w•_x™`{ždz cvž`s›]s›\s›\tœ]v^wž_{Ÿa| by¡bz¤b|§b{¦_x¦[x§Yz©Y{ªZ~ª]ƒ­e…¬i†ªm‰§s‰¥u„s|•mv‡unmfwe_P=_P=_P=_P=_P=_P=_P=_P=^O<^O<^O<^O<^O<^O<^O<^OÏcWÔh[ÔfYÁPB¹?2¹5)Ç7,Ô:0Ù5,ß2+ç6.ã0,ã4/â7/Ü8.à>1åC4â?0Þ4'æ4*é1)ò2/ð..ï-.ò14ô68ü?CðOTúY^éFKõRW×47ëFJÝ8<åBEÚ7:Î.0Ð15ãIKÑ8;Î8:¸#%Ñ<>Ü89ä;>ê=Aç6<â-4Þ)2â19çÿ/>ý)7ÿ-:ÿ9CÿAHûABã1/ß4-Ü5,Ý5,á4-æ3,ì5/ð50÷.4ù.2ú.1ù-0ø..ò/+ë3+ã7-Ø:.Ì>0´2$±7,±<3çtqþŠŠþŠ‹ÿr†ýj}ñbtð]pôRjûBbÿ6`ÿ5aÿ8_ïKfÁN[z;6Y?.LH/TZ@]cIbzJj„TrŽ[v”^yšc{ždxžas›\p˜Yp˜Yq™Zq™Zt›\uœ]y_zž`x¡_y¢^z¥^y¤\x¤Wv¥Uw¦V{§X~ª]‚¬d„«h†¨l‡¥o†¢r€šmx‘gr„lk}ecu]_O?_O?_O?_O?_O?_O?_O?_O?^N>^N>^N>^N>^N>^N>^N>^N>eQ6cR8aP<]P@ZPG\TR_Zab^otrŠyx˜€¨ƒ°~~²yx±wv°xw³t}Âw€Ã}…Æ‚ˆÆ…ŠÂÀ—–¾ ¼¬§»¶¬´¾³¯È¸©Ð¿¥Õ¡ϼ”Dz‡·kS®\F¤G5©=0ÂH=áVQðVTòNOì?Aë=?è<<ä<;ß=:×=5Ï;1Ë8.¿82Á<5¹:3·>5ÀPDÅYMÅ]PÎgXÐdWÁM@º:-Å8.Ò91Ø3-ß2,è50æ40á2-à5-ã<3çC7æC4â:-à3%ê5*è-&ð0+ð.,ò21ò44ç.,è00áEIõY]öW\ÿpuåDJéHNÞ=Cü[aÿouÝ>Cÿ~‚ÿmqêQTÔ>@Å02Ñ<>øEIî9>ð7=ø=Fô6@è-8ö>Jÿ\hÿmwÿitÿdl÷]gú^kÿapÿ]nüWhî_YãOKâJGÕ74Ò0.Ù54Ó/.Ø95ßD?ãJDáJAÙ@8Ó6/Ö5-Ü71â94ð$0ý/<ÿ1=ø*6û/:ÿ>Eÿ>Cì44â3.Þ5.Ý6-Ý5,á3*è3,ï4/ò5/÷.4ù.2ú.1ù-0ø..ô.+í2+ä6-×9-Ï@2µ1$²6,°7/èpoþˆˆÿŠŒÿkƒücxð]pïZnôPiýAdÿ7aÿ8dý=bæPi°QW^2'RG3DH/PV`P@`P@_O?_O?_O?aQAbRB_O?]M=]M=aQAcSCbRB`P@eS;aP<_O?^QH[QOZSZeapsq‰xxšz|¥~€±€¹}¼xy¹rs¶no²qwÏv{̓̋Ȗ—䤾²±¹½¸²ÌŲÓÍ­ÙЩÛУÛÑ ÝÑ¡ØÌšÒƔզŠ·gŸ_FËzgØte¾G?ØQMøbaìILç>Aä79æ9;ã99Ü75Ù61Û94È95À50ÇB;¹=5¾I?ÄXK·PAËeVÎdVÊYKÃG;Ä:/Í6-Ù6/â5/å3/á/-ß2,â70ä=4à<0Û8)Ý5(å8*å/$ê/(î.)ð0-ï20ë40è51æ40Ó8<åJNõY]ëOS×7?×6>ùX`ÿ~†ÿ~†ÿowÿgoÿipÿfjõ\_ïY[ô^`ÿRYÿCKü8Bü7A÷1>ï+9î/>ñ=IÿS_ÿ`kÿgpÿepþboÿbpÿ`oÿ[lìTOßFA×85×31Ù10×/.Ú21Ü86áD=ÜB:Ø?7Ö<4×90Û81á83ä84ô5=ó4;õ3;÷4<ø5;ó49ë33ã1/Þ3,Ý6-Þ7.à5+ä3+é2,ñ1,õ2.ø/5ø03ú/2ú.1ù//õ/,î3,å7.à@4Ë9,½7+®/&·<5ÒXWÿ˜šù~ÿhÿe|ö]rîRhòHeÿAeÿ9bÿ5`üJlÕRd‰==K. >>&?I.IO5]]EWlAcxMqˆZx’by–`t•\r–Xq˜Wl•Sm–Rn—So˜Vr™Xt›\uœ]uœ]tœVtWv Xw¡Wv¢Uv¢Uu¡Tt S{¥[{£\zŸ\u—Zn‹Uc}MXrCSj>AW1?U/`P@`P@`P@_O?`P@aQAbRB`P@_O?`P@bRBcSCbRB`P@fVF_QD\OF_TRcZ_f`nmkƒwv˜wy¢{}°}¸x|»qt·lo¶ln¸oq»suÙ|}Ù‰ˆÔ˜—Ш§Æ¹¶½ÉƵÓÏ©Ý×£âÜžçßžæÞäÜžâÙ ÙÒœÑʖѼ¸€¦~dÄ‹wÉ}m¶VJÓ`Y÷qnîZZêJLä>@é<>ì>@è:;ã56á34Õ=:Ë73Ê?8¹6.·>3¼L@³I;Å^OÛp`ÒaSÄH<½5)Ä0&Ö5-Ý4-Ü/)â43å95å<7à<3Ü8.Ù5)Ý5(ã5*í6.ï4-î1+ë0+ç0,ã2,á4.Þ5.Ò9;×>AäIMóW[ü\dü\dþ]eÿ`kôR]ïMXñQ[ÿ_gÿjqÿflô[`ëRU÷07ó+5ô+5ù-9ó&5è/ç'6í7DüP\ÿ[dÿclÿemÿepÿdoý[hõP^åFBÞ<9Û64ß63á53Þ20Û2/Û62à>9Û>7Ö<2×:1Ú91ß82å95è96é9;ê7:ë7:î79î79ì57å31Þ3,Û4,Û7-Þ7.á6,å2+ì1*ó0,ø1.÷05÷03ú/2ù.1ù//õ/,î3,ç6.ß=2Ò>2Â8-µ2*·82ØZ[ÿ“õw{ÿa{ÿ^v÷WqöOkøFfý=bÿ:cú=cëLhºJVw<8F5#7=#9C(DH/UP`rJnƒXw_v“]t“Zp”Vn•Tk’Ok”Pl•Qm–Ro˜Vr™Zsš[sš[tœVuWuŸWuŸUtžTržQqPq›Qn˜Pl”NhŒLbFXu?Nh8F]/@W+@W-@W-AX.YL<[N>^QA^QA^QA^QA_RB`SCaTD`SC_RB`SCaTDaTD`SC^QAbUM^QK[QPcYakesqm„vu•y{¤y{®y~¶w}»ns·ei°bf°jn¸rvÀ}zᇃᖔߩ§Ù¼¸ÏÍÊÃÝظçá­êå¡ïéŸðêžíæžéá¢âÛ¤×Ï ËĘ´°“¦œ˜„k§„p¥p`œRG»]UÞmi÷usð^_çHLæ@Dí@Dí=@ë7:ç36Ü>;Ô;6ÔA:Â70·7.µ?3­=/µG8Új\Þj[×\MÊB6Å2(Ñ4+Ú6-Ú1*Þ44éA>ìGCà=6Õ2)Õ1'Ú2'Þ0%è3*é1)ç.)æ/)ã2,â7/á=4âA7Ã-,Ê43ÜCEðVXú^bùYaóS]òP[èFQêHSðNYü\fÿmvÿmtôY_ÜAGó*2õ,4ý1<ÿ1>÷*9ï&6ö6EÿJX÷ISõOY÷W_ü_fÿdkÿai÷Q[éBJÞ95Þ63ã75é<8ë<9ç85â51Ý60Ý:3Ù;2Ö90×90Û81á83ç:6ì:8à;9â:9ã99ç98è88å84à40Ú3+Ú6,Ú8-Ü8,á6,å3)ì/)õ/,ú0.ô15õ13ø02ù.1÷//ó0,î3,ç6.Ý9/ÛD9Æ9/»4.´0,â`bÿƒˆônuÿ_zþWsúPmþLlýDfø8_ö9_ðGf×ReDJi=4K@,7@%8@(ED/LE2N^9YkEg|Qr‰[tZqUmRkMi‘Kh‘Ki’Lk”Pm–To–Up—Xq—ZuWuWtœUrœTpšRm—Mk•Kj”LdGaˆE\~AUt;Li3E_/AX*>U'B\/E_2Ic6WJ:ZM=\O?^QA]P@^QA_RBaTD`SC`SC`SCaTDaTD`SC_RB]P@YNR[PVbXcjcsqm†vu•xz£z|­w|´sy·mr¶bi±]c­ag±lr¾v|È‹‡æ”‘褡淴áÇÄ×ÕÒËáÞ¿èå²ëç¨ïê¦îé¥éã¥ãܨÛÒ§Ëß¾µ–Ÿ§˜š…‰v—‚q—se™cW³i`Ïrmû‹‰õutë[[çKNéCGî?Dî;?í8=ß:8Ý;8ßD?ÓC;Ã:0¹;/¯7)¦2#¾J;ÚbRék]ÛSGÉ9.Í3)Ö5+Ø4+Ù33ñMLý[XíKFÙ80Ö3*Û4+Þ2(à-&á,%á,%ß,'Ý0)Ú6-Ø<0×?2À0(Ä4,Î:6ÙCBßFHàEKäGPìLVñQ]öVbøXdû[gÿgpÿmuôY_Ø=Cñ.2ò-4ô-4ò*4í%2ì(6ûô@?ð<;ç85à72Ü92Ø:1×90Ù80Ü71ã73ê86ì87Þ<9ß;9â:7ä;8æ:8ä84Þ5.Ø4+Ù7,Ú8-Ü8,á7*å3)ì/)ô/)ù/+ó25ô23õ12÷/1÷//ó0,î3,ç6.Ü8.ßG<É90¾3.´-*îfjÿy€ójrÿ`{ýTqþKkÿFjÿ=cö3[î<^äPhÄXe…DBbE7WP=DH1@D-JH3JB/IW4Sc?btLmƒUp‹XoŒRkŽNiŽKgIg‘Ih‘Kj“Mk”Pm–To–Wp–YtœVs›Uq™Sn—Qj”Lg‘IeŽHdG`‡D]AWy=Rq8Mi6Lf6Ne7Pe:Lf6Oi9Sm=UH8WJ:[N>\O?]P@]P@_RBaTD_RB`SCaTDaTD`SC_RB_RB_RBTLY`Xgnf{tp‰xt•xw¡xz«y{´sy·jqµ`g¯\b¬`f°kq»v|Æ~„Ε”äžžè­­é½¼æËÉßÕÓÔÝÜÊãàÁåâ¹çã¶æß³àسÚÑ´ÐůÀ´¤¯¥™”œ‰ˆ†y‰}qwk›sk§ngºoi扄î~ósróedòVYòLNðCEî>Aå95â:7äB=ÞE?Ì<3Æ=3ÂB5­1%¬1"ÇI;ÛYKÖN@Ì=/Î8*Ò6*Ñ3'Ö34õUUÿkhú]XâE>Ü;3ß;2ã80â4-ä1,â1+Ý0)Ö/'Ì0$Æ/$Â0#Ã9,À4'Á3)Ë:5×CAÛEGÛBGÛ@HàDOìOZóVaòVaú^iÿgoóYaÝDIð88í55ï26ð18ò3;÷9CÿHSÿVaä6?Ý4;Ý7;êAFøKOüIMô;@ê05å61ë95ñ;8ó;9ó;9ð:7é73â70ß;2Ü;1Ù;2Û:2ß82ä73è64ì65á<8ã;8ä;8è:9è;7æ95á6/Û4,Ú8-Û9,Ý9-á7*å3)ë0'ò/)÷0+ð45ñ33ô22ô01ö0/ò1,î3,ç6.Þ7.ÞD:Ê7/¿1-¾21÷jpÿrzøhrû]vúPmÿCfÿ_L;_ZFQP;KI4PI6MB0DR1M[8[kFf|Nm…SmŠPlŒMhHfŽGgHg‘Ii’Lj“Ol•Sn•Vo•Xt™Vq˜Un–Pj’LfIcŒFaŠF_ˆDZ@X|?St;Pn8Pj:Tk=XmB[pEUp=Vq>Wr?RE5UH8XK;ZM=[N>\O?^QA`SC`SCaTDaTDaTD`SC`SCbUEdWG]Ulje|yu}yœzy£wyªvx±sw¶lqµcj²[c¬]e®hp¹w}LjІՙܡ¦à¯²å»¿åÆÇãÍÏÞÔÓØ×ÖÑÙ×ËÙÕÉ×ÑÅÒÉÂÌÂÀŹ»´§®¥˜¡‡Œ†xzuwvqulg~mfŒoib[œa[¾sm×zuï{ü|yÿrpýccöSTîHHñB=ê>:ã<6àA;Ñ:1ÒD:ÝTJÂ>2¸6)¼:,Â=.È?/ÏA3×C5×?1Ñ8*Ð23èLMú_]ñXSßD?Ø;4Û81à70æ92ç92ç92â92Ú9/Ñ9.È9+Ä8)®)¸3"È@2ÓI>ÒE>Ë;:Ì7;Ð9@Ï8AâHTïUaðYbõ^g÷`iêU[ØCIè?:ë?;ñAAúGJÿMRÿQYÿT]ÿV^á4:Ú/5Ú03ç7:ô=Aù:?ø48÷/2é61ï95ð95í41í1/ê20ç40á4.ã<4à=4Þ=3Þ;2à93ä73è43ë33æ:8ç98ê88ì89ì87é75ã4/Ü4+Û7-Û9,Ý9-ß7*ã2(è0&ï0(õ0*î45ð43ó32ó11ô1/ò1,î3,è5.à90Ù<3Ì70Á0-ÑAAÿnuýku÷coïSkóIfÿ;cÿ1`ÿ3bÿRJ7QF4MB0AL.GU4Sc>`rHgMj‡MjŠKh‹GeFfŽGfHgJi’Nk”Rl”Um“Vq–So”Qj‘NgŽKcŒH`‰E_ˆF_†G\‚E[~DWxAVr?Uo?YpB]rG_tKYtAYtAXs@NB2QE5UI9WK;XL\P@^RBaUEbVFbVFaUE_SCaUEfZJj^Nkg‚up|x›{y¡wx¨vw­pt±jo±ah®^f¯_g°em¶pxÁ~…͉ؖܙ¡Ï ¨Öª±Û´¹ßº¿ß¾ÂßÂÄÝÅÆÛÆÃÖÅÁÒÁºÌ¼³Æ»¯Å´¨¾¦˜±—‰¢†‡‰qqstpqogevhe†nj`Y”e_š[T·g`×tnî{vÿ{wÿwsÿhfù[ZÿQKöGBè=6èC=Ø;4ÛG=ê\RÅ;0Ä<0½7+¾6(Ç>.ÑD3ÔC2ÔA1×A0Ò8:Ø>@ÜDCÛC@Ö=8Ó91Ø7/Þ7/å:3æ93å:3â;3Û>5ÕA5ÑE6ÌG8¬.¼;%ÌK8ÑL=Æ=3»0+¿10Ë8>ÕBJáKVëU`ðZeð]eìYaßLRÐ?DÑ4+Ö8/ß<7ê@@ñDFôEJñBIî?Fâ5;ß26ã36ï8<õ79ù14þ-2ÿ.4ë40ð95ò64ì0.è,*è/,è2.á2-ä=5à=4ß>4ß<3ã:5ç85ì65í55ì57ì57í57ï56ï56ì42å2.Þ1*Þ7.Ü:-Ý:+Þ8*á3(ç1&í1(ò1*í55î53ñ42ó11ó1/ò1,î3,è5.ã;2Ò4+Ò;4Æ20çUVÿpxùcnñ[gãKbóEfÿ7bÿ+]ÿ1bÿ@hÞKe­RYd8/ZI7SN:UN;[P>VI8M@0MA1=H*CN.K[6Xj@ayGf‚HhˆIgŠFeŠDc‹BcEeŽHgLh‘Oi‘Rj’Tn“Pl‘NhLd‹Jb‰H_ˆF_‡H`‡H_…H_‚H]~I]yH]wH`wKcxOdyP[vA[vAZu@MA1PD4SG7VJ:WK;YM=[O?]QAcWGdXHdXHbVFaUEcWGj^NpdTvq‘yu˜xvtsŸrr¤su®lp¯bg«Za©^f¯em¸lt½u}ƈДڕœâš¤ÈŸ©Í¦°Ô¬´Ù°µÛ±µÚ²´ÚµµÛ³±Ö²®Ñ®¦Ë«¡ÄªžÂ¦˜»™‹®‹{Ÿ|y€dbgidhbY\g[[xeauXRe]ˆOHŸVO»aY×jcóvpÿ}zÿwuÿljÿZUÿPJñD>ôMGàB9ßF>êWOº,"¼2'½5'Ç=0ÑE6Ë>-Á2!É8%ÙF4ÞDFÒ9;Ë32Ë62Ó;6×<7Û<6á<6æ;4å82à5.Ø4+Ï5+Ê8+Ä<.Â>/ÑU;ÅI/»='½;+Ã=2Ä;5Â65Â37ÜKRÞLVâOYåS]éWaæU\ÝLSÒCGÉ5)Ð8-Õ81Ú64Ý55ß58á4:ß28å8<å6;ì9=ö8É53øceÿpyô\hêR_ÞHaõGhÿ:eÿ*]ÿ/aÿ@hÓE]–AFQ-!UJ8PN9OH5\O>YH8L<-NB2:D)?J*GU2Rd:]sBcEf†GeˆDcˆBa‰@a‹CcŒFeŽJfMgPhRlPkOfLcŠIaˆG_‡H_‡H`†I\‚G]€H]~I`|Ka{Ld{Of{Rg|S]xC^yD_zEAC8CE:IF=OH@RGAWI@]M>`O=aQ:aS9`T>_VGaZTfaeljwro€wožzt¢~wªzu«ro¨hf¥a`¢^^¦ba­hg·qoÃ|xÏ…€Ú‰ã—í–ó¢žÙ£ŸÚ¥¡Ü¦¢Ý§¡Ý¦¡Û¥ Ú¦žÙ¥Ö£œÒ¢™Ð¡˜Íž–É—ÁŒ‚´ƒy«mrvghlc_`e[ZlYUtUP€ULVK–RG¨ZN²ZP½\SÔmdç|tò…~üˆðxyõyyæabÜPQ×EEñYVÎ61È1(Ç5(Ä7&Â6%Ã8%Æ9'Ì:+Ð<.Õ?1Ô8+Ö=/Ø?1Ó;-Í5'Í4&Ø:.ã?5à90á90Þ7.×7+Ï7)È;)Ä@+ÁC,Ä;3È?7ÍD<ÏF>ÌC;Å<4»2*µ,$Ä>5ÍG>×QHÞXOá[RßYPÖPGËE<Ìÿ)<ö*6í.6ç48å;;Ü94Ü:5Ý<4à;5ã:5æ93é73é62ì25ì44ë54è64ä71ß7.Ú6,Ø6)Û9*Û:(Û:&Ü9&ß8%á8%â7#â7#í41ï4/ñ4.ó3.ó4,ï5)ê6(å8*à:.Ø7/×96Ý>BÿlyÿasþRlöGdÿIjû5Yÿ5]ÿ;eú=cãPj©LVT)":1 9<)EF4RL>PH;BC39E15K4FGHJ#MQ,U\:\jGcuOf}QeNc…Hb‡BaŠ>cŒ@eDjIl‘Nm‘Qj’IiFgŒFf‹Ff‹Hf‰Ic…Ic‚GdƒJdIc~Gc~Gd€FfFe~Dc|BX}8[€;^ƒ>[K>^M;`O;`Q:^S?^WGa\Vhcinlyrqƒtnšvpžtp¢pm¢gfŸaaŸ]^Ÿ\\¤ed°kjºtrÅ}{φ‚ÙŽˆà”Žè˜’ì›—Òœ˜Ó™Öžš×™Ö—Õœ–Ò•Ñž–Ñœ”Íœ“Ê›’Ç™‘Ä“‰»ˆ®€w¦tmtkdkf]`e[YiZSoWMzVJŠVI›UK°\RºYRÁXRÓf_Þqjãvoêwý‡…ÿˆ‡÷uuðfdäTSíYUÇ2+Â/%Æ7)Ã7&À7%Á8%Ä9&É:*Ï;-Ó=/Ö8,Õ9,Ó:,Ò:,Ñ9+Ñ9+Ô8+Ø8,ß;1à90Ü8.Ø8,Ð8*Ç:(¿;&¼;%¿4-Á80Æ=5É@8ÊA9È?7Å<4Â91¾5-Ç>6ÑH@ØOGÚQI×NFÌC;À7/Ê8Ñ9"Û8)å4,ï./ö*3û(7ÿ(:ÿ+Bÿ*Bÿ)Aÿ&Aÿ$@ÿ >ÿ=ÿ<ÿ8ÿ9ÿ$;ÿ);÷-9ï29ê7;å;;Ü94Ü:5Ý;6à;5ã:5æ93é73é62ì25í36ë54è64ä71ß7.Ü5,Ø6)Û9*Û:(Û:&Ü9&Þ9%á8%â7#â7#é4-ê3-ì4,ì4*ì4*ë5(æ6)á7*ÞcŒ@eDiŽHkMlPl’IjGhGf‹Ff‹Hf‰Id†JdƒHe„KdIc€HdHeGeGfEd}C\<_„?b‡B69.:<1??7E@:KB=OE/Ô>/Î6(Ë/"Ú:.Û7-Ù7,Ö8,Ñ9+É:)Â9&¼8#¾4*À6,Â8.Ä:0Ç=3Ê@6ËA7ÌB8Å;1Ê@6ÏE;ÐF<ÒH>ÑG=Ê@6Â8.Í6!Ô7&ß7,é3/ñ03ø,5ý*9ÿ*<ü'=ü'=û%=ù#;û!:ü8ü7þ7ÿ6ÿ6ÿ#8ý*;ù1<ñ6=é9;ã;:Ü86Ü:5Þ;6à;5ã:5ç85é73é62ï26î47í55ê65å61ß6/Ü5,×5(Ù9)Ù9)Ú9'Û8%Ý8%Þ7$à7$à7$â4+â4)å4*å5(ã6(â7&Þ7'Û8)Ý=1Ï2+×98ÿltÿ]nþPið=[ÿJlÿ5\ÿ=eü4[ô<`êTq«?Oa#(H1+79+-8'18&:;)B=*A<(@>)@B*?GY`4s~T€Œfw‡bi~Ub|MaI`ƒC`…?aŠ>cŒ@hŽEjJkMlPn”Kk‘HhGgŒGgŒIh‹KfˆKf…Je„Ke‚Jc€HeGf‚Hf‚GeFcDb‡BeŠEhH06*58-;<4A>9G@:KB;RE.Ð?.Ë8(Ç/!Ò6)Ó5)Ô4(Ò6)Ñ9+Í<+È=*Ä;(Æ9/Æ9/Æ9/Æ9/Ç:0È;1É<2Ê=3ÒE;ÒE;ÐB8Ë=3Ë=3ÏA7ÏA7Ë=3Ñ4#Ø6)â5.ë31ò/5÷+6û(7ü)<ù&9÷&;÷&;ø'<û&<ý%<ÿ$:ÿ#:ÿ!7ÿ"7ü%7ù-9÷5>ñ:?ç9:à87Ü86Ü:5Þ;6à;5å95ç85ê65ë54ñ27ð37î66ê65æ72á6/Ü5,×5(Ø8*Ø8(Ø9&Ù8&Ú7$Ü7$Ý6#Ý6#Ù6'Ú7(Û8'Ü9(Ü9(Û:(×:'Ö:+Õ;/Î3.éIKÿo{ÿVjøDaö=_ÿCiÿ/[ÿ7`û=cëLlÆOe€0=G >3--3'+8'2=,=B.B@+C;$G="MA'R_*q}MŸp—¨|ƒ˜mj„W_{J]~E_ƒCa†@b‹?fCk‘Hl‘Lm‘Qm‘So•Ll’IiŽHhHhJiŒLhŠMiˆMf…LdƒJdGe‚Hf„Hh„If‚EeDf‹FiŽIl‘L-3'17-7:3<;6B=9G?UOCZUQa_dhgukkƒllˆjg’baXV‡PP†QQXYš`cªfj´orÁuxÉ|Ѓ„Ö†‡×‰ˆØŠ‰×Œ‰ØŒŒÌ‹‹ËŠ‰Í‰‡Ð‰…ш„ÑŠƒÓ‰‚ÐŒ„Ï‹„È…Á†º†²‡¥}x–vpŠ“ScƒQ\qUT`^RVcOTbH_]DvUB’LB¼RRÖPWàPYé\dèejâljâwqâvláphõ~vÿ‚{ÿ‡~ôkaÉ?2À8(À;(¿='¾='¿='Â;'Å:'Ç8(Ê8)Ü8/Ú7.Ô8,Ï9+Ê;+È;*Ç:)É7(Ï9+Ñ7+Ô8,Ó7+Ï7*Ì8*Ë<,Ë>-É=0Ê<0Ê<0É;/È:.Æ8,Å7+Å5*Ð@5Ð@5Í=2Ë8.Ë8.Î;1Í:0É6,Ò.$Ù0)ä2.î23ô/8ù-9û+;ü+>ü-?û.?ú0@ü/@þ/Aÿ.?ÿ-?ÿ->ÿ)9ý)8ø*7õ0:ó6=ì9=ã77Ú53Ü86Ü:5Þ;6â:7å95ç85ê65ë54ò38ñ48ï56í76æ74á6/Ú6,×5*Ö9*Ö9*Ö9(Ø9&Ø9&Ù8&Ú7$Ú7$Ô9%Õ:&Ô<'Õ=(Ô=(Ô=(Ó>*Ó=.Ð8-Ù;8ÿ^eÿaqÿPi÷;\ÿAiû6aÿ/]ÿ.WøIjÛYq•>NX'-?+,730*1)-9-5@/:B+<<"B;VG(iV6v‡P£lª¾‹¨¾Ž¥wo‹[aK^F`…BcˆBeŽBj“Go•Lp•Po“So“Uo•Ll‘KiŽHgŒGiŒJiŒLi‹NhŠNf…Je„IdƒHfƒIg…Ih†Hg…Gf„FgIi‘Kl”N*2%.4*470894<;7B=:HA;KD(À>(Á=(Ä;(È;)Ì9)Î8*Ú3+Ù6-Ö:.Î:,Ç:)Â9'Ä;)É=,Í>.Ö@2ÙA4×=1Ï7*Ê4&Ê8)Ë<,È:,È:,É;-Ê;-Ê;-È9+È6)Ç5(Ê6*Ï;/Ò>2Õ>3Ö?4Õ>3Î7,Å.#Õ)%Ü-*ç02ñ29ø0;ü/>þ/?ý0Aú0@÷1@ö2@ö0=÷/:ù-9ú,8ü*7ý/<ù/;õ0:ñ2:í6;æ68ß55Ù42Ü86Ý:5ß:6â:7æ87é77ê67ë54õ49ó49ð69í76æ74ß6/Ú6-Ö6*Õ7+Ô8)Ô8)Ô9'Õ8'Õ8%×8%×8%Ï:$Î<%Î>&Í?'ÍA(ÍA*Î@,Ï=.Ð71éIKÿgrÿOdÿHfû7]ÿAmý/_ÿ1^ø1XåOj¹Wfh39@*,?994443524925>-2<#29ECl`8Ž}R™±u©Á‡µÎ—­È•’®}v”be†Q_ƒF`…Bc‰@gDo•Jr˜Or—Rq•Up”Vo•Ll‘KhGf‹Fh‹IiŒLi‹Ni‹Og†Kf…Je„If…IhˆIjˆJi‡Gg…EhJk“Mn–P(0#*2'/4-350664<87@<9C>8IEû3>ú0>ú0@ø/?ò.<ï/<í/9í07í.5ï,2ò+2ò)/õ1;õ3<ò5;ì59ç47á55Þ65Û75Ü86Ý97ß:6ã:7æ87é77ê67ë46ö5:ô5:ñ7:î87æ74à72Ù6-Ô6+Ñ8*Ð8*Ð9(Ð9(Ð9(Ñ8&Ñ8&Ó8&È:"Ç;"È>$Ç?%ÇA(Ç@*Ê>-Î;1Õ:6üU\ÿ_oÿGcÿ>bÿ8cÿ6gÿ0cÿ4\òCbÈMa…BIL44:97<<>948>58<7379+3="8DS[,ƒPª£o«Èˆ¯ËŽ¯Ì’¦Ã‘¯}{™ggˆQ^‚E^ƒ@c‰@iDo•Js™Ps˜Sq•Uo“Un“MkJgŒGeŠEgŠHh‹Ki‹Ni‹NfˆLd†Id†Ig‡Hi‰JjŠIi‰FhˆEi“Kl–No™Q&.!(0%-2+130333756:97>;6GD=DD*½<'»8$¾5#ÑB2ãOAäN@ØB4Í7)Ë7)Ð>/Ê;+É:*Ç8(È6'È6'Ê6(Î8*Ð8+Ó;.Õ;/Õ9-Ó5*Õ7,Ü;1Ý<2Ú9/ë7:ñ8=÷:Aü8Bü4A÷.>ò,;ï,:í/;é19è38é58í57ñ48ô36ö45î49ï6;í9<é69â45Ý33Ý86ß;9Ü86Þ97á98å99æ89é69ê67ë46ö5:ô5:ñ7:î79ç85ß82Ø7/Ó7+Ð8+Í9+Í:*Ì;*Í:*Í:*Í:(Ï9(Ä: Â: Ã=$Á?%Â@(Ä@+É=.Í81ßhŽCo•Jr˜Or—Rp”Tn’To“MkIgŠFeˆFf‰Gh‹Ki‹Ni‹NfˆKe‡Jd‡GeˆHgŠHh‹Gh‹GfŠDj”Lm—OpšR(0!'/"(-&+-*.0/333775:94==5?@8DE?JLKQQYVWiZ\s]^|YW†[Y‹^]–ee¥nn¸wxÊ€Ú„„䊌ðŠŒðŠŠì†‡ä‚‚Ü€Ô‚€Óƒ‚Ò€„ĄǃƒÉ„„ΆƒÒˆƒÕ‹ƒÖŒƒÒŠ€ÇŠ€½‰±…~ €xwpxkeec^XpZMm[Mi\Kf^Kd_IcaHfbGl`FlR;„UA£^O¿aYÑYXßPTñQ[ÿXbôkcæYRÔD<Î70Ñ7/×;/Ø/Å@/Á@-¾=*¼9'Â9)¾0"êVJáJ?Å.#Ñ=1Î2Ü<0Ù7,Û7-â>4éE;øAFó8?ð3:ö4?ö2>ñ-;ï,:í2=ì7@æ5;ã68å78é99ð:9ñ86ò65ï==î<<ê:<æ89á77ß76Ü75Ü75Þ97á98ã99æ::é9;ì9<í9<ï8<÷6;ô5:ñ7:í9:è:9à;5×90Ï7,Ë7+È9)Ç:)Ç:)Ç:)Ç:)È;*È;)Á9!Ä>%½;#µ5»:$ÈE3Í@6Ê0.ÿ^eÿVgÿHcÿ;\ú0Xø/[ý5cÿc‡?iDn”Im•Ll”Nk’Qj‘RjŽHfŠDc†Bc†Df‰Gh‹Kg‰LdˆJg‹MhŒNg‹Kf‹HeŠEf‹EjIm“Jp›SrUtŸW*0")/#).'+-(-/.222553782;<4>@5BC;HJGOPTSUaXYm[[s\Z‚^]‰da–kj¦us¼}Ї‡á‹‹íŒòŒ‹ñ‰‰í…„ ڀ~Ò€σ€Ï…†Æ†‡È‡ˆË‰ˆÎ‹‡ÑŒ†Ð…ÎŽ„ÉŠ€½‰³†{£‚x‘{s€tknkd^e\SbaLb`Ke^Kh]Ii\Ij^Hk_Gm_EraG{]CŽ[Fª[LÆWPàQS÷PXÿS`ìWQãKFÛ>9×50Ú5/Ý90Ü8,Ø8*Ó8&Ñ8&Ñ8&Ô8)×7)Ü5,à3,ã2,Ë1'Ë4)È9+Æ=-ÄA/Á@-¾=*¾9(Â9)Ë<.åQEÜH<È4(Ì:-È:,Á5&Ê=+Ê=+Ê;*Ì;*Ë:)Î8)Ï7)Ï6(Ó7*Ö8,Ù7,×3)Õ1'Ø1(ß7.å=4ûBHò7>í07ï/:ò0;î.;ì1<ê6?ã6<Ü36×32ß:8îEB÷JFøEAõ?<è:9æ:8å97â96á85à85á98á98à87â88å99ç9:é9;ì9<í8=ì7<ô5:ò59î68ê88æ:8Ý:5Ó91Ë7-Æ8*Ã:*Â:*À;*À;*Á<+Á<+Á<+½9"Á?)¹;$²5¸;'À>];2@>/3A05?4E=:X;?T-0X51ZI7bjEu[Š±pšÄ|žÈ|š¹}š¹€™·ƒ©yr`YuESq?\{B_>b†>iCm“Fl”Kk“Mh‘MhQhŒFeˆDc†Bc†DgŠHiŒLhŒNg‹MiOiMiŽKgŒGgŒGfŽGj’Im•LnœQoRr U-1"-1#,/&,.).0-11/34/45-9;0<>1@B5EH?KMLQRWUTbXWi\Yx^]fcŽpm¢zx¹…‚ÏŠáíŽñŽŒïŠˆé‡ƒá~Õ|Í}È}Ç…‡ÄˆˆÆŠŠÊŒŠËŒŠËŒ‡ÇŒ„À‹‚¹‰€¯†|¡€v‘{p€ujpod`i_Ue\MXeK]bKa_Jh[HmZIp[Hq\Go]EtcItZ?‚V= WDÅYMäTSûNTÿIUß@<Þ<9Ý84ß61á6/á6.Þ6+Ú7(Ö6&Ó8&Ó8&Õ8'Ø6)Ý5,á3,ä1,Ç5(Å6(Â9)Á<+Á@-Á@-À=+À8(Ã5'ÜJ=ÜE:ÕA5Îë7@ê=CÜ7;áAAìNK÷ZUüZUùRLïB>è62à72à74à74ß74à85á96ã;8ä::á77ä88æ89è8;é9<ë8<ì7<ì7<ò38î47ì57ç77â:7Ù:4Ï8/Ç7,Â8+¿:+½;+»<+»<+»<+»<+»<+º9$¾@*³9$°7$¶;+´2%Ã40îOTÿZiÿH`ù8Uó6Vó>]ñFfçHfÞEat?9e?6QA2@C04?.29)>5,O61K*#W:,j\Bˆ_«t”½{“ÃyÃv•²|œ¸…™µ…€šm\uKHa7Nh9[xB_}?c„?hŒBl’Ej“Gh’JgLeMe‰Cd‡Cc†BeˆFh‹IjŽNkOjŽNkOkOiMhJgHi‘Hl•Ip™Ms¡Vt¢Wv¤Y25$13&02'01+12-23.34.46+9;-;>-?B1DF9IJBNNNRQWTR]XVd\Zoda~nl”zw®„ÄŒ‰Ø‘Žå”‘ì“펋扅ڂÎ{Å|¿‚}¿ƒƒ¿……Á‰ˆÂŠÃ‹ˆ¿‹„¸‡®…}¦…{€vŽzm~sfmoa`k^Vi[NgZJVdJZbJa_JjZJpYIsYJtZIs]FqY?tU9†T;§ZFÌ\PæRNóEGù:AØ3/Ü41á51ä50ã5.â4+à6)Û8)Ö7$Ó8$Ñ8&Ô9'Ø6)Ý5*à3,ã2,Â8+¿7)»7(¼:*¿=-Â>/Ã;-Ä8+Æ3)ëTKÔ;3Ì8.ÑA6¾4'À<-½>-Ã7&Ä8'Æ9(Ç:)Ê8)Ë7)Ì6(Í3'Ó5*Ô3)Ö2)Û4,ã:3é>7ì?9ë>8è47ì59ï6;î5;ê2:æ39ä7=á<@óUVûc`ÿnjÿidóVQäA<ß61à3/Þ71Þ71Þ71ß82á85â96å97æ::å78æ89è8;é9<ë8<ë8<ë8<ë8<ñ48î68ê67æ87à;7Ö<4Ì9/Å8.½9,º;,¶;+µ<+´<+´<+³;*³;*³:'·@,­8&¬9'±;-«+"Ã54ÿ_gÿSdýE]ó;Uí1B2SE*okHŠ“f•¬t´t‹¹q‹½t¡¹‰¡¸Š§}l‚\K_:BV1Lc7Yq?_{@dƒ@i‹Ak‘Di’Fg‘IdJbLc†Bc†Bd‡CgŠHjMkOm‘Qn’Rj‘Pj‘Nj’Li‘Jg‘Gi“Gm—KqœMu¥Yv¦Zx¨\78(78*66,56056156167/68+;>-=@+@C.DG4IK=NNFQPNSQTVUSYY[a_lkius›€}´ˆ…ÈŒ‰Ö•’ã”äÞ‹‡Ó„Æ}º|µ€{±~¸‚º‡„»‰…¸Š„²†¨z›€xs‡znzrfjm_\j[Tk[NjZKjYI^bK_aKe^Kk[KpZLtZKw\Kz[G{WAƒS=—U?³XFÍSFÝF?å76ê01Û2-ß3/â5/å4.ã2*à2'ß5(Ü9(Ô7$Ð9$Ï:$Ñ:'Ô8)Ù7*Ý5,à3,½>-¹:)µ6%·8'½;+Â=.Ç;.É6,Ñ80ö\T×=5Ë4+ÏA5¸3$·:(¹@-Â9)Ã:*Æ:+È:,Ê;-Ì:-Ï8-Ñ7-Ñ3*Ò1)Ö1+Þ71ç;7ë>:è;7æ74é77ï;<ðê7=ê7=ð69î79ê7:ä::ß=:Ö=7Ë;2Ã;/¸9*´;*±<*¯<)­=)¬<(¬<(¬<(«:(¬=*¤9'¥:*©9-«0)ËAAÿgr÷L^÷E[ðBYèF[ÛN^ÈT]´VW§SQSU@LN9JG4JE1FD-AA'>C#@G%MU.^g,?=.==1==5=<7;<6;=2;=/?B-@D+CG,GI1KM8NOASPITQLYXDZ[M_^Zgepqo‡{y¡ƒ€·‡…ƌӋՊъ…ǃ€¹~z­zw¤{u¡zw°|y°€|®~©‚~£y•|t‰zrvkqrffm`Zl[QlZNl[KmZKmZIg^Mi]Mi]Mj]Mn]Ms^My^M€[I“`OšWG§N@¹I=Æ@5Ð6.Ù0)á0*á51â5/ã4/â4-à2)ß3'Ü6&Ú;(Ð9$Í;$Ì<$Í<'Ñ:)Õ9*Ù7,Ü5,ºA.´;(¯6#°5#¹:)Â=.É;/Í6-Û>7ùZTåHAÐ90Ì@3¸6&«4 ±>)¿7'¿7'À7'Ã7(Å7)É7*Î7,Ð8-Ù<3Û:2Þ93å<7ê>:ê=9ç85ã41è96ë<9ê::è8:ì>@øORÿccÿqpùheàUPÈ=8¿2+È5.Ö;7à<:â:9à<3á:2á:4á83ã73ä65å55æ68é69é69ê7;ë8<ë8>è7=è7=ç6<ð8:ì8;è8:ã;:Ý>:Ó>7É<2À+>467>O#Jh4gTt•\„›c‹™dŽ›f‘¢l•¬t•²x„”pn}\Q`C=J09F,BO3O_;Xi=czDgBkŠDk‘Dh’Fe‘F`G`Gf†Ci‰FjKlMlOkOm‘Ql“Rm”Qm”Qm–Pl–Lk—Jm™JržOu¢Qy¬]y¬]x«\CB0DB3DB6EB9CC;CC;BB8AD3CG0EH-GJ-JM0OO7RQ?TREURI[\:\\@\]Kaa_ihvrq{z¦~µ†‚¿ˆƒÃˆ„Á„¸{­ysŸtp•qmŽol£rn¡tq wršwrtoƒskxrilmb^l_Vj\OlZLn[Lo\Kq\Kq\KrZNq[Nn\Nl_Ol`PqaQy_N†[KŸ_S¦OE°A8½:2È5-Ï1(Ø1(Ý5*â70á6/á4-á3*à4(ß5(Ù6%Ô9#Í;"Ê<$È>$Ê>'Í<'Ò;*Õ9,Ø8,·D/±<(¬5!­4!¸9(Ä<.Ì9/Ï5-Ú83ñNIòSMÙB9ÌB5½@.¥2¬?(À;,Á9+À8*À6)Å7+É9.Ï;1Ô;3áD=ãA<ä?;ç>;é=;é;:è88ç77æ93æ95å84é;:ôJJÿ\[ÿdc÷caË=9¿82»4.Ã81ÓB=ÞE@ß=;Ù42â;3â;3â92ä84å84æ66é77é77ê69ë6;ë6;ë8<ë8>è7=è7=ç6<í68ê69æ89à;9Û>9Ñ>6Æ<1¾<.²8)®;)ª;(¦;'¤;&¡;%¡:' 9&ž?-”7%š=,—:)˜3'ÂQKíkmï\fïN^ìI\àHWÎJU·SS¡]RŒfQ‚jP=Sg{Fh‚Cl‹Ek‘Di“Gc‘Fa‘G^Gi‰FlŒImNn‘OlOjŽNkOk’Qp—Tp™SpšRo›Po›NqNv£Rw¦Uz­^z­^y¬]GD3HE6HF9HE±61Á3/Î5/Ö5+Ù7*Û8)ß6/ß4-à3,à4*â6*Þ7'Ø7%Ï7 Ì<"È>"Æ>$Ç?'Ê>'Ï<*Ó:,Õ9,µE/­='¨3¬3 ·8'Å;.Ì9/Ò5.Ò/*ä?;ûYTàI@ÎD7ÆI7¥5®D,ËF7ÉD5ÉA3É?2Í?3ÒB7ÚF<àG?ßB;à>9à;7à74â64ä65ç77é99é>7ç:4ä73è<:ñIHñMLØ=;¹(%¸-(¼5/Å@9ÌC=ÐA;Ö=8Ý>;ã?>á:2á:2â92ä84æ95è96ë99í9:ë7:ë6;ì7<ë8<ë8>è7=ç6<æ7<ì59è58å78ß:8Ù<7Ï<4Ä<0º:-°8(«:(¨;'¤;&¡:'Ÿ:&Ÿ:&ž9%š?,4"—>,“:*“1&Ì\X÷y|æT_ðTbèI[ØDRÃGO®SPšbS†lS{rSC[C?H3B7%O6"_K0prJ€£iˆÇ€yÃt{¾qu¢]oƒHy}J‡†Xy|O\d5:D)3=$4>&WN?XO@YPAZQB\SD]TE]TEcZKbYJbXNcXRg\Zmacsfmwjs|n{~p}s€s€~p}wjtobli\fcb]a`[a^W_\U_[R^ZOa[ObZMe\Kg\Ji\Ii]Gk\El]Fm]Dm]D_gOkiTqZH{M@•RI©WL®TI³WH¦N:¢G2¢?*ª;(¾:.Ò72à23å,1Þ7.Þ7.Þ7.Ü8.Ü8.Û7-Ø6+Ø6+×7+Õ7+Õ7+Õ7+Ô8+Ô8+Ô8+Ô8+¸=.·=.°8(§2!ª2!´;*½>/Â:,Æ6+Í6-Ô:2ÜB8àI>ÖG9Ç;,¹1!ßOGÙIAÔE=ÓE;ØH?ÜG@àC>á<:ã54ê67ï8:í9:ç77à72Ý:3Ü>5ÎKAÈE;½=0µ7)°5&³8)¹>.ÀA2Á;/Ê<2Õ>5ß=8ç;9î79ò67ô68æ7>æ7>æ7<å8:å99å97ã:5ã:3Þ5.ß6/ã81ä84å97ç98ç9:ç9:ë;>ç9;á99Ü<<ÖA=ÌC;ÀB6´@3¦;+¢=+>,™<*–;(•:'”9&“8%‡F2‡>/†/%”-(ÀIKèkoçlqÊWZ¶OP©TQŸVO˜YP•[P–]R™^Vœ`XMb!:O3JOf x’I˜²h¡½r »t™²pƒ›akN\lEWdHS\GHN@=C9;<,AB4=?2:=2,¯:)½9,Ì70Ø42Þ22Ý6-Þ7.Ü8.Ü8.Û7-Ú8-Ù7,×7+×7+Õ7+Õ7+Ô8+Ô8+Ô8+Ô8+Ò9+¸>/·=.®9(¥2 ¦3 ²:)»=.¿;,Æ:-È4*Ì3+Ó;0ÜE:ßPBÞRCÚQAÝE@Ø@;Ñ<6Ð;5Õ>7Ø=8Û96Ý33é69í68ï79í68é77å97â=9á?:ÆC9¿?2¸:,±6'¯5&²8)¸=-¿@1ÅA4ÍA4×@7ß=8å97ê67ï56ô68ç6<ç6<ç7:æ89æ87å97å95ã:3â92ã:3ã:3ä;6æ:8æ:8å99å99æ9;ä:=à<=Ú?=Ñ@;Å?6¸<2¬;-¥;+ <,œ=+—<)–;(’:&‘8&7%z;)€8)‰5*ž;5ÁQPÚceÔ]a¹MM­NL¤SOYP˜\R—^S—^U˜_V™^VSg*Sg(^r3zO—°l¥¾z™²nˆ¡`j‚Fau@Sf9IY5FP7?H59?358/;<,AB4=?2:=2;A5:C2@M3Rc?]uCgƒHqLp”Jm“Hk“Jk“Lh‘Km‘Tn’To“Sm”Qk“Lj”Hl—Hm˜HpJnžJp Ls£Ou¦Tx©Xx©Xx©Zm–\b‹QY‚H]TE]TE]TE]TE]TE]TE]TE]TE[RC\SD]TE^UF_VG`WHaXIaXIe]He]Jd[Jd[Le[Qf[Uh]Yh\\i]]j^`k_ak__i]]f[YbWU`USYVMWTKTQHRNCQMBSOCWQCXRB^WG^WEaYFc[Fg\Hi^Hk`Jk`J^cOmhUy_PˆXN¤[T³VQ´HE¸E>¹@7¸>3·<-·9*¼8+Ã9.Ê:/Ï;1Û7-Û7-Û7-Ü8.Ú8-Ù7,Ø8,×7+Õ7+Õ7+Õ7+Ô8+Ô8+Ô8+Ò9+Ò9+º@1¶>.®9(£2 ¢3ª:&µ=,»=.Ä?0Å7+Æ2(Ê3(Ð<0ØF9ÛM?ÝQBÜ87Ø43Ô20Ô52Ù:7à>;å=<é;<ï8<ï5:ì27ê24é56å97á<8à=8¹;-·9+±6'®4%­5%°8(µ<+»=.ÈD7ÏC6ÖB8Ü=7â96è64í55ò67ê5:é6:é69ç79ç77æ95å:3å:3ã:3ä;4ã<6ã<6ã;8â:9á99à88Ý9:Þ;<Û@>ÕA=É>7º:1­7+¥7(¡;,œ=+˜=*”<(’;(9&8%Ž7$u8%y6%ˆ9,¢E=ºROÂVT¹OO¬HH¤LHœSL˜ZO—^S–bU—aW˜_V˜]UgxB{ŒU“¦n¥¸€«À‡ž³zz‘YYp:?R$AS)AQ-?L0:C.6<.690581:;+@A3=?29<1;A59B1@M3Qb>_wEi…Js’Nr–Lo•Jm•Lm•Nk”Np”Vq•Uo–Sn–Pl”Kk•Il—HmšIpJpJp Lu¤Sx©Xyª[u¦Wq¡U_ˆNVEOx>aXIaXIaXIaXIaXIaXIaXIaXI_VG`WH`WHaXIbYJcZKd[Ld[Le]Ff^Gf^Ig_Lg^Of\Pf\Rf\Sh]Wh]Wh^Uh^Ug]Se[QdZNdZN]YNZVKVRFRNBPL@PM>RO@UO?WQAYTA[VC^WDaZGd]Jf`JgaKadSleUt]O‹[Q«b\»YXºDD¾9:Æ;8É:6Ç80Â8-½8)¼:*½@.¾C1Ù7*Ù7*Ú8+Ú8+Ú8+Ø8*Ø8*Õ8)Õ8)Õ8)Ô8)Ô8)Ô8)Ò9)Ò9)Ò9)»A2¶>.¬9'¡4 2¢8"¬=)µ@.¼>/Á9+Ä6*Ç4*Ë7+Í;.Î0å26á14Ý02Ý34à88å;<ë=?î;?ï6<í38ì/5é05ç47ã77Û64Õ30±7(°6'®6&¬7&¬7&®9'²:)µ:*ÃA3ËA4ÔA7Ü?8â:7ç85í76ð67í6:í6:í68ë76ê86è94ç:4æ;4â92á:2ß:4à;7Þ:8Ý98Û97Û89Ö<:Õ@<ÓB?ÊA;»;2¯6+¥5'ž7(œ;*—<)“<)‘<(:&8$Œ7#Œ6%z@,v5#6'™E;¬OH¬MI©LG¨PLPH–VL“ZO“_R“bT•aV—aW™`W~‹]™©z­½Ž¦·Š¡ts†YN`8/A->3B%:F.=F3;A3:=2;<4<=79:*?@2<>19<1:@49B1?L2Pa=`xFj†Kt“Os—Mq—Lo—No—Pm–Pp—Tq˜Up˜Ro—Pm•Ll–Jn™JoœKqžMrŸNt£Sy¨X|«]w§[mSd”J[„LS|DNw?cZKcZKcZKcZKcZKcZKcZKcZKcZKcZKd[Ld[Le\Mf]Nf]Nf]Nf_Eg`Fh`IiaLiaNi`Oh_Ng^OjaRi`Qi`Qh_Nh`Mh`Mh`KiaLb_P^[LYVGTQBPM>NKTQ>VS@YVC\YF^[H^]I`aSf^QmWJ†[R­hcÁb`ÄLMÌ@CÔ:<×79Ö74Î70Á9+·>)²D+°H-×7)×7)Ø8*Ù9+Ù9+Ö9*Ö9*Õ8)Ô8)Ô8)Ô8)Ò9)Ò9)Ò9)Ò9)Ò9)¼A2¶>.«:( 7"™5š7 ¢>&¯B-±<*º;*Â:,È8-Ë8.Î:.Ð<0Ò>2ò5<î3:é27ã36â46â46â46ä15ì5:ì39ê38ê5:æ8:Ü66Ñ2/Ç,(®9(­:(­:(«:(«:(«:(¬9&¯7&¸:+Á<-Í?3Ø?7à=8æ:6ê86ì87ï56î66î66í74ë84ê93ç:3æ;3á:2ß;2Þ=5Ü=9Û=:Ù><Ø=;×==ÌA<ËB<ÆA:»<3­7-£5(ž7(š;)–;)“<)=(Œ;(Š9&‰8%ˆ7$‡6#}C/s4"y4$“G:¤RG¡NFžNE¡WN˜UL’XL[NŒ\NŽ^R”`U—aW›bYƒŽd˜¤|©ƒ€Žj]kJDS42@&$2-:&0;*5=.9?36:;3::29:*>?1;=08;09?38A0>K1Pa=ayGk‡Lu”Pt˜Nr˜Mq™Pq™Ro˜RršSršSršQp˜Om—Km˜Ip›LržOt Qv¢Sx§Y{©^z¨_qŸVd’JY‡?]†NVGQzBe\Me\Me\Me\Me\Me\Me\Me\Me\Mf]Nf]Nf]Ng^Og^Oh_Ph_Pg`Fh`IiaJjbMjbMjbOjbOjbOjbOiaNh`Kh`Ih`IhaGibHjcGe`Mb]J^XHXRBSM=MJ9KH7IH6KJ8LK9LM;NO=PQ?QTASVESVEYYM]WKcQEzXN¡ha¸eaÇUUÛORÞ=Cã8>à67Õ62È:.¹@+­E*¦I*Ô7(Ô7(Õ8)Ö9*Ö9*Õ9*Õ9*Ô8)Ô8)Ò9)Ò9)Ò9)Ò9)Ò9)Ò9)Ñ:)¼@4µ=/«<+ :$—7’6š<#¦B*°C.¹@/¿;,Ã7*Å2(Ë4+Ó:2Ù@8ó1<ð2<î5=ë8>ç:>å;>ä:=ã9<á48ä5:å8<ä;>Þ;<Ò86Å1-¼-'«<+«=,«>*©>*¨=)©<(©:'«8%¯6%¹7)Å;.Ñ=3Ù<5à;7ä;8è;7ð75ï75ï75î84ì94é;4è;4å=4â>5à?7ÞA:ÚA;ÙA>ÕA?Ñ??Ñ??¾B:»@8µ<3ª8-¡5(›5'˜8(•<*‘;*<)Š<(‡:&†9'„7%ƒ6$‚5#y<)r3!}:*—OA£YLœRG•OE–VJ”ZN[MŒ[M‹[OŽ\Q”^T™`Yœa[s}Xyƒ`r|ZU`B9F,/;'0;+1;03=44;35<4:?8?B9?A6<<277+89)>?1:27@/=J0O`HO?HO?PPDVRGYOChREYM˜UL³RLØXWàGJçï:Aì?CæBCáACÞ@AÚ>?Ï12Ñ56Ô::Ò<;Ê;7¾73µ4.¯3+¥>+¥>+¥>+¦?,¥>+¤>(¥<'¨;'ª7$²7'¼8+Å8.Ì8.Ö92Þ<7ä?;î85î85î84ì94ë:4è;4å=4â>4âA7ÝC9ÚC<ÕB;ÐA=Ê?<Ç=;Ã<9®>3©:/¢8+œ6(˜7'”8)‘:)Œ;(‹=)ˆ=*…<)ƒ:'‚9&€7&6%~5$v4$x5%…B2˜UEœXK“QCPD•ZL’ZM[NŽ]OŽ\Q’\R•\U˜[V™\W`hCX_=JS4>G,6?*2=-4>35?74=88>:=B/;9*78(=>0:26?.=J0N_;`xFk‡Lu”Pu™Os™NršQršSp™SqœMrNqœMp›LošKrNu¡Ry¥X«`~©az¥]qœUf‘L_‰G[ˆE\‰Hb‰RY€ISzCh_Ph_Ph_Ph_Ph_Ph_Ph_Ph_Pg^Oh_Ph_Ph_Ph_Ph_Pi`Qi`QmcWlbVjaRi`Qh_Pg^Og^Mh_NiaNiaLiaLiaJh`IhaGhaGhaGh`Kg_Je_Ib[H\WCUR?PM:ML:EF4DG6DH7BI9BI9BJ;BJ;BJ;JJ@QQERPAUNÄYSÛQOãCEå8:ß55×:3Ê>/¸>)¬<$Ï8'Ï8'Ð9(Ò;*Ò;*Ò;*Ò;*Ò;*Ñ:)Ñ:)Ñ:)Ñ:)Ñ:)Ñ:)Ñ:)Ñ:)½=2¶:.­<,¥>+˜9#Œ59ž@' :$¯<)¾?0È;1Ì8.Ñ7/Ù<5àA;ð;Bï>FëBGãCEÖ@?Ê;7À50»1.·0,¼51¾:5»<6³:2©9.£9,¡9,Ÿ>+Ÿ>+ ?,¡@-¡@-¡A+£>*¤=*©<(­:(²7(¹5)Á4*Ë80Ö?8ÝD>é:5é:5è;4è;4ç<4ä=4á?4Þ@5ÝC9ØD:ÒC;ÊA9Ä?:¼;6¸85´73ž9-™7*•5'’6'‘:)<*‰:)„9&†=*„=+=*€<)~:'|7'{6&{6&y1#€8*ŒG8–RE’PB‹K?ŽSE™_SXKZN’\R–]T—\V˜[V˜YT—XSV^7EM(6@8A&>G27@E>GJ?GI;BC1?>);;#78(=>09;.69.8>26?.E5>F7?G8=H8AE4HK6YS;_F0€K9Àj]Ýf`åSSçDEè@@ã?=Ö=5É=0Â>/É3$Ë5&Ì6'Í7(Í7(Î8)Ñ;,Ó=.Ò<-Ò<-Ò<-Ò<-Ñ;,Ñ;,Ñ;,Ñ;,¸3,·7.±;-¦;)˜8"‘7’8š:"«B-±<+¹7)Á4*Í6/×<7âC?êHCëBGéDHÝCCÉ:6»61´80®8.§5+ª:/¨9.¤8. 8-›9,–:+’<+>-˜=*˜=*™>+š?,›@-œA.žB-¡@-¡<*¥:(«7(°6)¶6+¾8-Å;1Ê=4ß:4á<6â?6ã@7âA7ßA6Ú@4×@5ÚG=ÒE;ÇA6»;2±6.ª3-¤1,¢1+”;-’:,:+:*‰:)ˆ;)…<+„=+~:'|9(|9({:({:(z9'x6&w4$z, A4˜NC“MAŽL>RE‘VHŽRG˜\R˜\R‘UMTL™ZU—XS–WR `^R[0IQ(AK&BK,>H/7@-2=-4>34;3HPEX^RW[LLO?1;=0:=29?34=,;H.Pa=bzHlˆMu”Ps—Mq—Lp˜OršSqšTpJqžKrŸLrŸNsŸPv¢U{§\ªb‚­fx£^i”O_‰G]‡G`ŠJfŽOhRd‰U[€LTyEi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qj^^j_]j_]j_[j_Yj`Wj`Vj`Vj`TjaRjaRjaRjaRjaRjaRjaRj_Kh`Kg_Jg_Jd]J^YEUR?ONE5?E7>F7>F7=E6BF8>E5=F1DN5HK0PB'yS<¹ubÉdXà_YíUTêFGä>>â@=Û>9Ñ82Ì:+Î<-Ï=.Ð<.Ï;-Î:,Í9+Í9+Î:,Î:,Î:,Ð:,Ð:,Ð:,Ð:,Ð:,È?9ÆA:½A7®=/6#•2•2™3¦5#²7(Á;0ÑA8ÞE?æIDéJFìJGÞBCÛEDÎC@¼;5®9/¨>1¢A1œ?.œ@1™@0–>0’?/Œ?-ˆ?.„A.ƒB.‘;*‘;*’<+“=,”?+”?+–?,™>+Ÿ@.¡=-¤:,§9*¬8+±8-¶:0¹:1Ð90Ò;2Õ>5ÕA7×C7ÖD7ÔD9ÑE8ÊB6ÃA4¹=1°:0¨8-¢5.5,œ5.Ž=,Œ=,Š;,ˆ;+†:*„;*<,€=,~;*|;)y:)y:)x9(w8'u6't5&„1)‘C9˜NC‘K?ŒJ>PD’TIRG“SJšWQ˜UO™UR\X”WTŽSO—\XT]0Zc8_j@[eBIT66C)4@*0:-;H.Pa=c{IlˆMu”Pt˜Nq—Lq™PršSqšTq¡Kp LpJqžMt Qx¤W|§_ªc{¦aošUcŒJ]…Fa‰JeNeNc‹Ld‰U[€LTyEi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qj^`j^`j^^j_]j_[j_Yj`Wj`Vj`Vj`Tj`Tj`Tj`Tj`Vj`Vj`VlaMk`LiaLiaNf_La\I[VCTQ@ML:HI9DG6AE6AE6?E7>D6=C5=F57@-?H3EM5AA%QA']E³u`³WHÙbZðebîRSéEFìFHèBDÝ79È9+É:,É:,É:,É:,Ê8+È6)È6)Ê8+Ë7+Ë7+Ë7+Ë7+Ì8,Ì8,Î7,Â3/¾5/¸5-¬3( 0"›0Ÿ1 ¥4$»A2ÇC7ÖG?ãKFçLGéJFåFBâC?ÕCCÏDAÁ@:°;1£=/žC1™F4•G3’E3E2ŒC2‰B0ƒB0B/{B.xD.Š8*‹9+‰:)Š;*‹<+<+Ž=,<*–?.–=-›;+9* 8+¥9-©:/«;/¼7.¾90Á;0Ä>3Å?3Æ@4Ä@3ÁA4¸:,²:,ª9+£7+7+™7,–8.–91‰=-ˆ<,…<+„;,‚:+€;+<+<,};+z;*z;,w9*v8)u7(t6's5&Œ91”F<—MBŽJ?ˆHMKB3;I27C-EJ3IG0K<%mN9—dO§`NŸA5ÆSLçc_ð^^îRUíJMêDHç>CÉ;/Ç9-Å7+Å7+Ç9-Ê:/Ë;0Ë;0Ñ>4Ñ>4Ñ>4Ò>4Ó?5Ó?5Ó?5Ó?5Ó?=ÑB>ÍD>ÆF=ÁG<ÂI>ÆN@ÎPDÙSJÞOGäLGäIEåFCâC?àA=ß@<ÔFDÊC?º?7«<1ž>.—D2“H3‘J6‹G4ŠF3‡D3„C1B0zA.wC.uB/†8+…9+…9+†:,†:,‡;-‡;+ˆ;+‰:+‹:)Ž8)8*•9,™<-=/ž>0«9/­8.®9/°:.°:.²:,¯9+®8*¨7)¥7*ž7(›6*•7+’8-9/;0†=.…<-ƒ;,9*:+~9*}:*};-|:,z;,y;,w9,s8*q6(q7)q7)B8”G=‘K?ŠH<‡I<‹OD“UJ—TL—PLSP˜QO–RO—\X_Xh^žzn™k…’fu‚VYh=CR)?O(P`B'=A&;>#78(:;-79,9<1;A57@/MKH/JH1Q?+e>-”ZL¬`S›>6œ4+µ@9ØXUóigödeëRUèINìKQ×J@ÓF<Í@6Ë>4Í@6ÒD:ÕG=×G>ÚJAÚJAÝJBÝJBÞKCßJCàKDàKDëRTéSTãTPÜSMØSLØSLÛTNàUNàLHâHFäEBäB@äB@äB@ãEBãEBØJHËD@¹>7ª>2žA2–C1F3I6‰F3‡D3†C3ƒ@0@1}?0y@/x@1ƒ9.ƒ9.‚:.‚:.ƒ;/ƒ;-ƒ;-ƒ;-9*‚9*…9+‡9,‰:+;-<.=/›;/œ:/ž9- :.¡9,¢8*¢8*¢8*Ÿ8)œ8)˜8(”8)9*Œ:,ˆ:-‡;-ƒ;-‚:,9+~9*}8)}7+|8+{9+z8*y9-x:-t9+q5*o5)q7+r:-G;ŽH<‰I=„I;…K=ŒRF“WMšWO˜QMžTQ™RP•VQ’`YˆbW‚h[ŠwhivKZi>JY.AR&IZ0Wi?dvLj|TXjDL\8?M,:D)C-=@-:=*89):;-68+8;0H-NC-b=-„D:¯VP¶MJ¡++´:9º=;ÑTPòpnýwvñehêY^ò]cáVOÚOHÒG@ÎC<ÑD=ÔG@ÖGAÖGAÙHCÚIDÚIDÝIEÞJFÞJFàKGàKGãGJáGIÝGHÙGG×HD×HDØGDÝEBàBAåABé@CêBBèBBäB@ßA>ÜA=ÚJIÌB@»<6®>3¢@3—A2B0D3‰A2ˆ@2ˆ>1…=1‚<2€<1=1}=1ƒ:3;3;1;1€<1€<1=/=/=/€.™9)•9*“:*Ž;+Š;,‡;+ƒ;,€;+‚:,9+7)~6*{5){5)z6)z6+x6*x8,w9.s7,o5)o5)r:-u=0ŽL>‰K>„J<‚M=…QC‹VH’XM—WN”MIœRQšTR•[We\y_PcXFb]IBP,?M)?O(K\2_qGk~QcyKVk@M_7@R,6E&7D*=F1=D4:=27:19:*:;-68+8;0G*SA+{E9¦NL¸EH»5<¾19Ë@EÄ?@ÊJIÞb`îrpïopçbeáZ^ÛRJÕLDÏD=ÍB;ÏD=ÒE>ÐC<Î?9ÒC=ÓB=ÔC>×C?×C?ØD@ÙEAÚEAà?Dß@DÞDFßFHßIHàJIãIIæFHçACëADîAEîACéAAâ@>Ù>:Ö=8ÛEGË=<»73°;4¦@4˜?1>0ŽA1‰=/Š<0‰;1‰92‡81†93…:4„;4:4:4€<3€<3<3}=3}=3|<0{=0{=0{=.{<-z;,y:+z8*z8*€:0‚:.„:-ˆ:.Œ:.‘;.”<.–=-’9)‘:):*Š;*‡;+ƒ;,<+}<*€8,€8,~6*}5)|4(z4(z4*y5*u3'v6,v8-r6+n4(n5*s:/v@4‹PB†N?N=R@…VF‰XIŽUJ‘RI“NI™RP”SO‘\VŠfZl\LML7BL3@O.KZ9WgC`rJezOdzLVl=G]/AV+7I#0A!5C*=F5QJ:MG7IC3GA13M*>G*[B.PGºVVº7?»'3ÜBNÐ:CÄ9>»;:ÂHGÓ][ßgf×[]ÇILÓJDÏF@ÌC=ÎC>ÒGBÒGBÐB>Ë=9ÒC?ÓB?ÔC@ÕDAØDBÙECÙECÚFDá>Cà?DÞBEßEGáGGàFFàBCâ=AëADí>Cì;Aê<>æ>>ãA?ßD@ßFAÙ@CÉ78¹30±:4§?4š>1=/Ž?2Š;.‹9.‹80‹61Š71Š73‰84‰:5:3:3:3~;3|<3|<2{=2{=2u9.v;-w<.w<.x=-x=-y;,y;,{;1};/~8,7*„6)‡5'‰6(‹5&7(‹8(‹:)ˆ;)…<+<,~=+{<*€8,7+~6*|4(|4({2)y3)y5*t1(u5+v8-r6+n4)n5*t;0xB6ŒTE„Q@P>‚UB„YHˆYI‰SGNG˜SN˜RPPKˆVO‚bUeZHFK4;K0IX;[jKgxVewQYnCSi;Me5I`28M"-B*;2@):E7;B;8<;7;<<=-<=/79,9<1=C77@/6C)DU1Rj8_{@mŒHp”Jq—LršQtœUr›Uq¢Qt¥Vu¥Ys£Ym›Sd‘N\‰HZ„DdŒNa‰J`‡HcŠIfJiŽIeŠDa‡>`‚PWyGPr@i`Qi`Qi`QjaRjaRkbSkbSkbSjaRjaRjaRjaRjaRjaRjaRjaRkbSkbSkbSkbSkbSkbSkbSkbSlcTlcTlcTlcTlcTlcTlcTlcTo\Nq_QtdUrdWnbTj`Th`ShbTgaSebQa^K[VBVQ;TN6NH.GA'RD)N=#cI2iV²zm·ng³[W¸PQ¶BEÁ@EÉ@GÑBFÖDGÚEIÜGIÝGIÔBEÔBE×BDÙEEØDBÒC;ÎD:ÌH;ÄF7ÃH9ÆH:ÊG?ÐEB×BDÜ?FÞ=EâBDâBDâBDâDEâDEãEDãEDãEDâDAâC@áB?â@>ã?=ã?=ã?=å@>ÎE?Ä?8¶:2©80Ÿ:0•>4Œ@3ƒ?2A4|@5}?4<3ƒ:3‡83Š73Œ72…<-…<-…<-„;,ƒ;-‚:,‚:,‚:,9-9-9-~:/~:/~:/~:/~:/~80~80}90}90}90}90|90|90|90|90z:0y9/y9/x8.w9.w9.w8/w8/v7.t8.s7-r6,q5+p6+l2'q7,m4)l3(o6+m4)q8-H=ULƒTL†QK‹PJNJ•NL˜NM—PL”SM‹UK†\NdOkaFTW8JX5N_;gT`zMWpFTkARg@O`0CA4B@4@<12:/2:/4:.5;-9=.A,>D*T^4ÉE9ÈF9ÊG=ÍG>ÒGDØCEÜAEß?GáCDáCDáCDâDEâDEáFDáFDáFDàEAáC@àB?ßA>àA=àA=â@=ãA>ÑFAÉB<¼=6¬:0 90“;/‰=0=0A4|@5}?4<3ƒ:3†91Š71Œ72…<-…<-„;,„;,ƒ;-‚:,‚:,‚:,9-9-9-~:/~:/~:/~:/~:/}90}90}90}90}90}90|90|90|90z:0z:0y9/y9/x:/w9.w9.w8/w8/t8.s7-r6,r6,p6+p6+k1&q7,m4)l3(o6+l3(p7,~H<‚SK„TJˆQJ‹PJ‘PL•OM–PN–RO‹OG…SH€[K{ePsiPhkLdrOgxT\uKXoEPf?Ka:K_:K\:GV7CP42><03;03;05;/6<09=/A,>D*Q[9^mDmPpŒRr’Sq™RsSsŸRxža|¢exžak‘T`†I]ƒF]ƒF\‚E`†Ia‡Jc‰Le‹NdŠMbˆK`†I^„G]MRtBIk9i`Qi`Qi`QjaRjaRkbSkbSkbSjaRjaRjaRjaRjaRjaRjaRjaRkbSkbSkbSkbSkbSkbSkbSkbSlcTlcTlcTlcTlcTlcTlcTlcTtbTo_Pm]Pm_ToeYog\keYhbVfbVpl`{xi~{jzgzuapiVf`JPVÔG@ÖGCÚFFÛEFÝDGáCDßCDßCDßCDàDEßECßECßECÞDBÞE@ÝD?ÜC>ÜC=ÜC=ÝB=ÝB=ÕF@ÎE=ÃC:³>5¢:/’8-ˆ9,<-€A2~@3}?2=1ƒ:1†91ˆ81‹80…<-„;,„;,„;,‚:,‚:,‚:,€:.9-9-9-~:/~:/~:/~:/~:/}90}90}90}90|90{8/{8/{8/{;1{;1z:0y;0x:/x:/x:/x:/t8.t8.s7-s7-r6,q5+o5*o5*k1&o6+m4)k2'n5*i3'm7+}G;†QI‡PIŠQJŽQL‘RM“RN•TP’UPVO‡[P^OtbNoiQnrWjwYfwWPf@K_:EY6BV3EV6GV7FU8ER8?I1*7;*:<.<>0<=/:;-5<45<46<26<09=/<>0=@-=C)MV7Zi@h|KlˆNpOq™RuŸSt Sz cw`n”Wc‰L\‚E\‚E\‚EZ€C_…Ha‡JbˆKdŠMc‰La‡J_…H]ƒF[}KPr@Gi7i`Qi`Qi`QjaRjaRkbSkbSkbSjaRjaRjaRjaRjaRjaRjaRjaRkbSkbSkbSkbSkbSkbSkbSkbSlcTlcTlcTlcTlcTlcTlcTlcTtdWqaTm_Rk_SkaWlcZle[jf]jf]wuiˆ„y‘•’Œ|‰‚r€ygZfNLV>AI2CF1ED0D?,I=-TD5M:+O8*R6*T7)X8+];/a?3eA5‹KAœSL­UQ¶NK½EDÇABÓCCÛEF×?>Ø@=×B>ØD@ÙEAÚFDÛEDÛEDßCDßCDÞDDÞDDÞDDÝEDÝEBÜGCÛFBÚE?ØE>ØE>×D=×D=ØE=ØE=ÖC<ÔE?ÊE>»@8§;/–8,‹9+…;.‚@2@1~?0=/;/„:/‡9/‰90„;,„;,ƒ;-‚:,‚:,‚:,9+9-9-9-~:/~:/~:/~:/~:/~:/}90|90|90{8/{8/{8/y9/x8.{;1y;0y;0y;0x:/x:/v:/v:/s7-s7-s7-r6,p6+o5*o5*n4)j1&o6+l3(h2&k5)h2&l6*|F:ŠOGŒPHQIRMSN’UPWPŽYQ‰]R…aUy_PiZGd_IciOZgKN]@EU8AQ4=M0G2:A/7>,9=,9=.8<-7;,6=66=66;46<29<1;=/dxGj†LpOs›Tw¡Uw£T{¡dr˜[e‹N\‚EZ€C\‚E\‚EZ€C_…H`†Ia‡JbˆKa‡J`†I^„G]ƒFY{INp>Ef7i`Qi`Qi`QjaRjaRkbSkbSkbSjaRjaRjaRjaRjaRjaRjaRjaRkbSkbSkbSkbSkbSkbSkbSkbSlcTlcTlcTlcTlcTlcTlcTlcTseXugZsg[mcYjaXle]snhzwp~w† –©¥œ«§œª£™£‘œ”‰v~i`hSLSADK9AJ7>G4>G4BI7GNBÛ?@ÛAAÛC@ÚEAÚEAÚEAÚEAÞDFÞDFÞDFÞDDÝEDÝEDÛEDÙEAÚFB×FAÕF>ÔE=ÓF=ÓF=ÓF=ÔG>×@9ÕB;ÏD=ÁB9®>3œ:-‘;.‰=/„?0?/~?0=/<-„:-†:-ˆ:.ƒ;-ƒ;-‚:,‚:,‚:,9+9-9-9-~:/~:/~:/~:/}:1}:1}:1|90|90|90{8/y9/x8.x8.v8-y;0y;0x:/v:/v:/u9.u9.u9.s7/r6.q6.p5-o4,n3+m4+m4+j1(o6-j4*h2(j4*g1'k5+zF;MGNH‘PJ’SLUOŽWPŠZP…ZQ{YMv\OkZJ]UBYXDY^HOYA>L3;G18D.5A+5A+8D.=I3AM7EN;BK8?H5.5<,4;+5;75<56;56;48;2:-;@)GP1Ra:buGi…Kq‘PuVy£Wx¤Uzcn‘W`ƒIZ}C[~D^G^G]€F`ƒIa„Jb…Kb…Ka„J`ƒI_‚H^GW{KLp@Bf6haQhaQhaQibRibRjcSjcSjcSibRibRibRibRibRibRibRibRkbSkbSkbSkbSkbSkbSkbSkbSlcTlcTlcTlcTlcTlcTlcTlcTmaUndXpf\lcZkd\rmg„|‘‹¥¤ ³²®ÄÁ¼ÉÆÁÉľÅÀºÀ¹±¹²ª¤œˆ‚tfcTPQAEI8=F38E18G45F35F44E36D58D6;E:?G<@H=<6(L0–=/Œ=.†>/‚?/€>.=-<-ƒ;,„;,‡;-‚:,‚:,‚:,‚:,9+9-9-~8,~:/~:/~:/~:/}:1}:1}:1}:1z:1z:1y90y90x8/v7.v7.v7.u9/u9/u9/s9.s9.s9.r8-r8-q6.q6.p5-o4,n3+m4+l3*l3*h2(l6,i3)f2'h4)e1&i5*xD9’KE’MF“PJTLVO‡XNYO|\Os\Nk[L_XFUTBPS@JQ?@I64@,3<+2;*09(09(2;*5>-9B1-;@*CL/O^7_rDi„Mr’SwŸXy£Wv¢Us–\f‰OZ}CX{A\E]€F]€F^G`ƒI`ƒI`ƒI`ƒI`ƒI_‚H^G]€FVzLJn@Ae7haQhaQhaQibRibRjcSjcSjcSibRibRibRibRibRibRibRibRkbSkbSkbSkbSkbSkbSkbSkbSlcTlcTlcTlcTlcTlcTlcTlcTiaVjbWkdZmf^upjˆ…€Ÿžš°°®ÂÂÀÓÒÐâáßéåäçãàãÞÚÞÖÓ×ÏÌÒº°º¤™˜†zym__YIKL:>F19E1>2J91`94ˆHH²\_È_dÍVZÐOSÕMOÚLKÜJJàHEáFBãDAåA?ÞDFÞDFÞDFÝCEÝCEÜBBÛCBÛCBÚDCØD@ÔE?ÓF?ÐF<ÏF<ÐG=ÎH=Ý>8Ú?:ÒB9ÉC:¼C8«A4™<-Œ9)‡>-ƒ>.>-€=,€=,<,ƒ;,…<-‚:,‚:,‚:,9+9-9-~8,}9.~:/~:/~:/}:1}:1}:1}:1}:1y:1y:1x90x90w8/t8.s7-s7-s9.s9.r8-r8-q8-p7,p7,p7,p5-o6-n5,n5,m4+l3*i3)i3)g1'k7,h4)e1&h4)d0%f4)uC8•JE“LH“PJTL‰WNYOx[Mp]Nj^N]WGPQAKN=CJ:9B12:+08)36-17-06,/5+/5)17+2:-4<-9D4;F6=H7*0640641622716929;0:<.:?)?H+KY5]pChƒLs“TwŸYw¡WržQiŒT^IUx@WzB[~F[~F[~F]€H_‚J_‚J_‚J_‚J^I^I]€H]€HUvKJk@@a6haQhaQhaQibRibRjcSjcSjcSibRibRibRibRibRibRibRibRkbSkbSkbSkbSkbSkbSkbSkbSlcTlcTlcTlcTlcTlcTlcTlcToh^ng_lh_tqj…„¡ ž¼¼ºÏÏÏÎÏÑààâòòòúøùû÷öøòòñìéêåâïÍÃàÀµÅ©¥€sbaZGML7CH2AI4AH6BF7BD7C@9D<9C98C772?5;@9@93H/+c76QR³giÇmmÂ[\ÉYWÑUS×QNÝKKåGFèBBê@AÞCGÞDFÞDFÞBEÞBEÝADÜBBÜBBÜDCÙCB×C?ÔC>ÒE>ÐE>ÏF<ÐG=â@;Ý@9Õ@9ÌC9ÀD:°B5›;-‹5&Š=-…=.>-€=,€=,<,ƒ<*„=+‚:,‚:,€:.9-9-~8,}9.}9.~:/~:/}:1}:1}:1}:1}:1{;2w;1w;1v:0u9/t8.s9.r8-q7,r8-q8-p7,p7,n8,m7+m7+m7+o6-o6-n5,m4+j4*j4*i3)h4)f2'k7,h4)c1&e3(b0%e3(uC8”JG“NIQJ‹TM„XOzZMq[Mh\LXUDHK:=D4=E69A208+/7*5=056157257247005.06,08-19,6A3:E5=J9>K9;J77F12A,0?*.42.420511605818:/:<.:?+WzB[~FY|DY|D\G_‚J_‚J^I^I^I]€H]€H]€HSsJHh?>^5icSicSicSicSicSicSicSicSicSicSicSicSicSicSicSicSkbSkbSkbSlcTlcTmdUmdUmdUmdUmdUmdUmdUmdUmdUmdUmdUfc\gd]vsn“’Ž¯¯­ÄÆÅÚÛÝìíïóôöö÷ùüüþÿÿÿÿþÿÿûúüööùôñÿÞÏöÖÇãÈ·É´Ÿ­ž‡ŠƒicbFGG-EG/DF0GD3IC5H;3F42G34M797@;;@:@;8G85cGF‘kjŔ譩ҋ‡ÇtnÀ]XÆSNÖNNâIKëEIðCGÜFHáHKÜCFÕ:>Ø>@âFIàDGÖ:;Ú@@Ú@@ÙA@ÖB>ÔC>ÑB<ÏB;ÏB;ãA<Ý@9Ô?8ËA7¾B8°@4;.8*‹>.†>/‚?.>-€=,<+=*=*9-9-9-~8,~8,|8-|8-|8-}9.|90|90|90z:1z:1z:1z:1x=5w<4v;3u:2t91r7/p7.p7.o6-m7-m7-m7-m7-l8-l8-l8-i2+m6/p92o81k4-g2*g2*h3+e0(i7.d2)^,#`0&_/%b2(p@6’LJOKŠQJ‚QJ}YMv_QfYIRO>CF5=F58C35@02=/3;04:04:077577566446135016/05..6+.9+2=/6C29H5:I68G42D./A+,20,2.-2..3-36/780:&DR1YkCh‚Ru”[wž_r›Wj•N\}HXyDTu@Tu@WxCZ{F[|GZ{F^JbƒNbƒN^J\}H_€K`L^JTrNFd@:X4icSicSicSicSicSicSicSicSicSicSicSicSicSicSicSicSkbSkbSkbSlcTlcTmdUmdUmdUmdUmdUmdUmdUmdUmdUmdUmdUed_onj…†¤¤¢ÁÃÂÖÚÛêîï÷ûþ÷ûþøüÿüýÿþþþÿþÿÿýüÿüùÿûøÿïÚüêÒîÞÅØͱÀ»¤£„‚ƒcgkJMP1II/EC,HA/J>2L93M85Q99;;9BA?MHE\RQyjg¢‹Ì³®åÇ¿ÿÙÏ괪̃|Àc\ÌVTÛPSãFMâ=DÕEEÕEEÙGHÞIKÛEGÖ<>Ö<>Ü@CÚ>?Ù??Ú@@ÙA@ÖB>ÓB=ÒA<ÐA;ß@:Û@;Ô?8ÌA:¿C9±A6 ;/‘9+Œ=.‡>/ƒ>.>-€=,<+€=,<,9-9-9-~8,}9.|8-|8-|8-|90|90|90z:1z:1{;2{;2{;2v=4u<3t;2s:1r90p7.m7-m7-m7-l8-l8-l8-l8-j8-j8-j8-l5.n70n91n91l7/i4,g2*e3*c1(e3*_/%^.$b2(^.$`0&n?5„IEˆQLˆWRWOrVKdRDQJ:>?/:A16A14A02>02<14<15;17:388677577557446116005./7,.8-1<.4A07E49H58G44E22D.062.40.3--2,14-45-8:-9=,7?'DQ3YkEh‚Sv”`wbp˜YfNZzHWwETtBTtBVvDYyGYyGYyG[{I_M_M\|J[{I^~L^~L\|JTmOF_A9R4icSicSicSicSicSicSicSicSicSicSicSicSicSicSicSicSkbSkbSkbSlcTlcTmdUmdUmdUmdUmdUmdUmdUmdUneVneVneVddby{x—™˜²¶µÍÑÒäéìôùüúÿÿûÿÿûÿÿûÿÿýÿþþþüÿÿûÿÿúÿÿúÿüßúùÛïðÐáåÄÒØ´¼Äž©‡’j`hCRW7DG,EC.KD4MC9N?8L=8C:;SJKi`a€xv›“¼µ¯×ÐÈçÝÓúêÝÿôéÿåÛ画Äec¸ACËBIáNVÚVRÒLIËDAÎBAÔFE×EFÙCDÛBD×=?Ø>>Ù??Ø@?×A@ÕA=ÓB=ÒA<Ü?:Ù@:ÔA:ÍD<ÀD<²B7¡<2“9.Œ=0‡=0ƒ>/>.€=-<+€=,€=,9-9-9-}9.}9.|8-|8-{8/}:1}:1{;2{;2{;2{;2{;2{;2t;2s:1p:0o9/n8.m7-k7,k7,l8-l8-j8-j8-j8-j8-i9-i9-n91m80m80m80m80i7.f4+c1(c3)a1']-#_0&c4*\-#_0&sD:OK‚UPXQqSK^J?OC7?<-37(2:+/<+0<.2=/4<15;17:37:388688668557257227016/08-.8-0;-2?.6C27E48G48G48G46=53:2/4-,1*.1(13(57*6:)6>'DQ5[lHk„Zy–fwœfl”X^‡KWwEUuCRr@Rr@TtBVvDWwEWwEXxF[{I]}K[{I[{I]}K\|JXxFPfOAW@3I2icSicSicSicSicSicSicSicSicSicSicSicSicSicSicSicSkbSkbSkbSlcTlcTmdUmdUmdUmdUmdUmdUneVneVneVneVofWgklƒ‡ˆ£§¨¹¾ÁÐÕØåíðóûþõýÿùÿÿûÿÿüÿÿüþûýþùþýøÿþ÷ÿÿöóÿâñÿÞëùÖäòÎÛêÃÌÛ²³Â™ ¬„}‰cdnKLS4EI0HJ5KI:GE9D@7QEEk__‹€¤š™µ°­ÊÇÂÜÜÔççÝ÷óèÿýñÿøíÿÝÕú·±èŽŽÌbd±>CÃPIÉTMÉOJÃF@ÊFBÔMJØJIÑ??Ò>>Ô>?Õ?>Ö@?ÕA?ÓB?ÓB?ÒC?×>8×?:ÒC=ÌE?ÀE>±B9¢=5•;2Œ<1‡=0ƒ=1=0=-~<,€=-€=-~:/~:/~:/}9.}9.|8-{8/{8/~;2|<3|<3{;2{;2z;4z;4z;4p:0o9/o9/m9.l8-k7,j6+h6+i7,i7,h8,h8,h8,h8,h8,h8,o:4j81h6/i70j81j81e4-a0)e4-b1*].&a2*b3+Y*"_3*zNE~]XvWRiNGWC:J<3@:.:;-8<.08)/:,1<.2=/5=25;169078079468368349338138119.19..9+/:,1<.2?.5B18E4:I6;J7;C87?428.-3)-0%/1&24'48)4<'ER8_pPr‹d}šnwœifXT}EUrBTqASp@Sp@TqAUrBVsCVsCWtD[xH]zJ\yI^{K_|L\yIVsCK\JD8f\Z†|z«¡ŸÁ·µËÃÁÕÐÍãâÞîïé÷øðùöíüòèÿóéÿóíÿäß즤´if«K=³QDÁYNÇ[QÆQH¿D=ÂA<ËD@Ë@=Ï?>Ð@?ÑB>ÒC?ÒC?ÑC?ÑC?Ö>9Ô@<ÒD@ÉE@½D<¯@9 >5•<4Œ<3‡=2ƒ=1=0=/~<.=/€Qn>Qn>Qn>Qn>Qn>Sp@Sp@WtD[xH]zJ]zJ_|L_|LZwGQn>ESF6D7(6)gdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSkbSkbSkbSlcTlcTmdUmdUmdUmdUmdUneVneVofWpgXpgXpgXinrz‚…“š «´¹ÄÍÒÜåêì÷ùôþÿôþýöÿüúÿúûÿ÷ûþóøúìõöæòóãòþêôýèôüåóøáòöÛëëÏØ×¹ÅÄ¥±°’ŽregOMP;EL:EM>EODGSG~zqŸ›’ƽ¸ÙÎÌáÓÒçÛÛôêéü÷ôðïëûüöÿÿöÿþôÿúñÿôêÿçÞÿÚÒß‘}·fS¢K:²UF½WKµF;·@8ÈKEÇC>ÊC?ÌB?ÎC@ÎC>ÍD>ÍD>ÌC=Ô@<ÒC=ÎE?ÅD?¸A;ª=8ž;5•<4Œ<3‡=4ƒ=3=2=1~<0=1=/~:/~:/~:/}9.|90{8/{8/{8/|<3{;2{;2y:3y:3x92w81w81m80l7/j8/j8/i7.i7.g7-g7-g7-g7-f7-f7-f7-f7-f7-d8-i70h6/g5.f5.g6/h70g6/e6.a2*e6.^2)\0'`4+a5,i=4|PGQJBE>6:6-85,99/8:/47,36+4:.5;/5;/69.69.68-57,46+19,19,19,19,19,19,19,19,08+.9+.9+/:*0;+3>.6A17B2gw]umv‘nf‰_RwKAh;Mj:Nk;Pm=Pm=Nk;Nk;OlVsCZwG]zJ^{K_|L_|LVsCLi9=H@/:2#.&gdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSkbSkbSkbSlcTlcTmdUmdUmdUmdUmdUneVneVofWpgXqhYqhYcjpmtz„’£¬±¾ÉÍÓÞâåðòðüüòüûõþùøÿ÷úÿôüÿòúýìøùçöøãööìù÷ëúöêýöæÿôâøëØçØÁÖƯÀ±šŸ“}vn[ZWFOQCQWKYcZbme–˜‹²²¦ÕÎÆêÜÙõããüéëÿñôÿ÷ùÿýýýþùøûôõûñúýòÿÿóÿÿóÿÿñÿãÊ¹q[¨WD¬SCµQB¹MA¿JAÂG@ÆE?ÉE@ÊE@ÊE>ÉD=ÈC<ÈC<ÒC?ÒD@ÌEAÂC=³=9¦;5œ;5•<6Œ<5‡<6ƒ=5=4<3~<0=1€<1~:/~:/~:/}9.|90{8/{8/y90{;2{;2z:1x92w81v70v70u6/k90j8/j8/j8/j8/h8.h8.h8.g7-f7-f7-f7-d8-d8-d8-d8-h6/h70i81i81h70i81j;3l=5g80k<4b6-a5,oC:xLCtI@uJA:=647036/7:18;247.14+25,58-58-57,46+46+46+46+46)/7(08)08)08)08)08)08+08+19,08+08+/7*08+19,3;.4e9Jg9Li;Nk=Nk=Li;Li;Mj
    UrDYvH[xJ]zL^{M\yKQn@Eb47@;+4/!*%gdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSkbSkbSkbSlcTlcTmdUmdUmdUmdUmdUneVofWpgXpgXqhYriZhowmt|‚‹’¥®µÂÍÑÔßãäïñòþþóýüôÿùöÿ÷úÿôüÿñýÿíýÿêýÿêÿöñÿøóÿ÷ïÿ÷íÿöëÿïáöÜÍäʹƯ§”ƒ€sce]P[YM_bYovo|…€¦­¾À³ÚÖÍñãàÿìíÿñôÿñ÷ÿñ÷ÿ÷ûûúøøÿøøÿúôÿõîÿïòÿï÷ÿóÿñÖÿðÖÿÈ°Å}g¢O=®Q@¸RD³C8ÀIAÄH@ÇF@ÇF@ÈE=ÇD<ÆC;ÆC;ÓD@ÐE@ÊE@¾A=±;7£74š93•<6Œ<5‡<6ƒ=5=4<3~;2<3=1~:/~:/~:/}9.|90{8/{8/y90z:1z:1y90w81v70u6/u6/t5.k90k90j8/j8/j8/i9/i9/h8.f7-f7-f7-d8-d8-d8-d8-d8-f5.i81l;4k:3j92j92m>6qB:n?7pD;g;2g;2SJŒaXTKpE<6=52913:27<5492/5+25,9<345-35*24)13(13(35(46)57*,7',7'-8(-8(-8(-8(-8(/7(19*08)08+/7*/7*/7*08+08+7@+9B-=D2=D2=A29;-35'/3$3:*JVBcr[f}a\wVLnICgA=c:He7Kh:Nk=Nk=Kh:Jg9Li;Nk=TqCWtFZwI[xJ]zLZwINk=A^05;9*0.!'%heVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheTheVhdYkd\kd\md]meZmfVg`MjeOnlWnl]ff^eeeqqy‡‘“–ž¡«³¶ÃÈËÙÝàìíï÷÷÷ûùúþýûÿþúÿÿûýþøûüöùüóúýôùÿõùúõùúôøúïúûëûýèöùÞäçÈÒÖµ¶¼š”›ymvW\fK`lTq~lƒ‘€žŽ··µËËÉââàïïíôôòøøöúúøùù÷þþüþþüþþüþþüþþüþþüþþüþþüæÿÿðÿÿûÿÿýïîЪ§ a\™D=¸MEÄKBÈC:ÊA7ÎD:ÑH>ÏJAÉI>ÆG>ÁJ2¿K4¹L5¯K4 H2”F2ŒE3‡E5‚D5C6€@4‚>3…;2‡9/Š7/6-~:1~:1}90|8/{7.z7.y6-x5,w7-w7-x8.x8.v8-u7,s5*q3(h91h91h91g80h70g6/g6/g6/f5.h6/i70j81i70h6/f4-g2,k1-k4/n70m80k9.j:.i>.iB1dC2gJ8aJ8raOyn\ƒ|j…‚qOL;4:04:04:039/39/39/28.28.17-17-17-06,06,/5+/5+/5+/4./4./4./4./4./4./4./4.05//4./4..3-.3-/4./4.05/0;32=55A77C98D86B64@22?.3@.DQ=WeN\jSSaHHV=DR8FT:Ic>Ke@Ke@Ke>JeOjAUpGYtK\vO]wR]wTWpPHaC8Q3).2&+/$)-heVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheTheVhdYkd\kd\md]meZmfVjcPlgQmkVlj[gg_lll~~†’ž§±³¹ÁÄÏ×Úâçêðô÷ûüþÿÿÿÿþÿþýûÿþúÿÿûþÿùûüôøûòøûò÷ýóøùóøùñøúíøùéùûåòõÚáâÃÌЯ´¸—‘–vkrSYaI_kUtoŒ˜Š›©œÀÀ¾ÓÓÑççåóóñ÷÷õûûùüüúûûùþþüþþüþþüþþüþþüþþüþþüþþüîÿÿôÿÿüÿÿÿüúÿíêñ¿¸Ã}u¢J@³K@»J<ÅK>ÈJ>ÄD9½=2¿?6ÃD;ÂH3ÃJ7½M9³J7¦G5™C4D6‹F7ƒC7C8A7>5‚<4„:1†91‡81}:2}:2|91z:1y90x8/w7.v7.u6-v7.t8.t8.t8.r6,p4*o3)i81i81i81h70h70h70g6/g6/e3,e3,g5.h6/j81j81j81k92k60l71m80l:1k;/l>1j@0iD2hG6kP=gR?ufSvd‹†s†ƒrML:4:039/39/39/28.28.28.17-17-17-17-06,06,/5+/5+/5+/4./4./4./4./4./4./4./4.05//4..3-.3-.3-.3-/4.05/-80/:21=34@66B66B66B45B16C1CPAO6BP7FT:Ic@Jd?Ke@Ke>Ic3L/).2',0$)-heVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheTheVhdYkd\kd\md]meZmfVmhTmhRmkVjk[jkcvxw‘‘™¨ª¶¾ÈÊÓÛÞêòõ÷üÿüÿÿþÿÿÿÿÿÿþÿþýûÿþúÿÿúýþøúûóõøïóöëñ÷ëô÷îöøíöøêö÷åõ÷áîîÔÛÛ¿ÉÊ«°±’“–yuy^kpZt{iˆ§œ¬¶­ÎÎÌÞÞÜïïíøøöûûùþþüþþüýýûþþüþþüþþüþþüþþüþþüþþüþþü÷ÿÿùÿÿþÿÿÿüúÿúôÿöíÿÑÄÙž•L=§Q@¬K;ª>1¸G9ÑXMÐTJ¾?6ÆD6ÇH9ÄJ=¹I=ªB7?5•A7’E=‡A9„A9@:>8~>5<4<4€;4x<2x<2w;1w;1v:0u9/t:/t:/s9.r9.r9.r9.q8-n8,l6*k5)j81j81j81j81i70i70i70h6/g5.g5.g5.g6/h70i81k:3k:3l;4k:3i:0j;1k?2lB4iD2fE2fI7lVAjYEviV†l‘Ž{€mEF439/28.28.28.17-17-17-06,17-17-17-06,06,/5+/5+/5+/4./4./4./4./4./4./4./4./4./4..3--2,-2,.3-/4./4.*5-+6.-9//;12>24@46B47D38E3?L:ER>CQ:;I28F->L3ES:H`>Jb@LdBKc?Ia=G`9F_8G`9RkDXpL]uS^vVZqTPgK=T8,C)).2',0%*.heVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheTheVjcYkd\kd\md]meZmfVniUljSlkVlm]pqi€‚ž¡¨º¼ÈÃÍÏÜäçóûþûÿÿúþÿüýÿýýýüûùÿþüÿÿûÿþùûüôõöîîñæëîãçíáíñãðôåñôãòôßðòÜêêÐÙؼÈÇ«²±•¡¡‡‘“}‘’€œžª­¢¶»´ÀÅ¿ÜÜÚééçööôûûùýýûÿÿýÿÿýýýûþþüþþüþþüþþüþþüþþüþþüþþüüúÿÿþÿÿþÿöòïûôîÿýóÿûíÿõäêı·ƒn”Q>¡P=¸XH¸L?¸D7ÀG<Ç>4ÉD;ÈH?¿F>°?9¢;6š=8–A>?;‡@<@<}@;z?9y@9x?8v?8v=4v=4v=4u<3s=3r<2r<2q;1o;0o;0o;0l:/k9.j8-j8-i7,n72n72m61l71l71k60i70i70l:3j92h70g6/f7/f7/h91h91j?6f>4e=1f>2hC3iE5gF3cG2cJ6hV@k\GskV‡‚nŽzor_9>*28.28.17-17-17-06,06,06,17-17-17-06,06,/5+/5+/5+.3-.3-.3-.3-.3-.3-.3-.3-.3-.3--2,-2,-2,-2,.3-.3-)4,)4,*6,+7-.:01=14@25A36C2:G5Æ=7ÈA;ÈD?ÀC?´<;©98 9:›==‘==Š>>„@?|A=xA6s>6s>6r=5p>5p>5p>5n>4n>4m=3l<2j;1j;1i:0i:0i:0p62p62p62o51m61m61k60i70l;4k:3h91e90e90e90e:1f;2dB6cA5cC4dD5fG5eH6cH3_I2^L6eV?jbKrmW„ƒn„‡r[`L3;&28.28.17-17-17-06,06,06,17-17-17-06,06,/5+/5+/5+.3-.3-.3-.3-.3-.3-.3-.3--2,-2,,1+,1+,1+,1+-2,-2,,6.+5-*4,*4++5,.8-0:/2=/2=-5@06A05A-1=)1=)5A+9E/=O5AS9FY=I\@J]?J]=K^>L_?TgG\oQcvZbtZYkSK]G6G4$5"&+.$),"'*heVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheTheVjcYkd\lc\md]meZlfVlgSljSlnXorasvm…„Ÿ¤ª¸¿ÉÖßäîöùùÿÿûÿÿùýÿþÿÿÿÿÿþýûÿÿûÿÿúüüôóõêëíâãçÙßãÕÜãÓäéÒçìÕéíÖêìÔëëÓèæÏßÚÄÔθÔͺÍƶËøÐÉÁÙÒÌàÛØëååòîïòòðùù÷ýýûýýûýýûÿÿýþþüüüúþþüþþüþþüþþüþþüþþüþþüþþüÿøüÿöùÿýýþÿý÷ÿýïÿøëÿõòÿøëúçÿÿíÿïÛ̧”£lX£ZG­VCªM;ÁA8ÃB<ÃD>¿D?·?>­;;£99œ:;–<<Ž>?…?=}@=wB7o>7n?7o@8n?7m>6i=4h<3h<3h<3i=4r73q62q62p62o51m61l71j81h70g80e90e:1d<2f>4f@5gA6]C4aG8cL:dM;cM8`K6]K3]M4]Q9`Y?miPss[€„mt|eFO:2>(39/28.28.28.17-17-17-06,17-17-17-06,06,/5+/5+/5+-2,-2,-2,-2,-2,-2,-2,-2,-2,,1++0*+0*+0*+0*,1+-2,,6.,6.*4,*4+*4++5*-7,.9+-8*0;+4?/5@/4?.3>-3?+4@,7F/;J3@P6DT:GWºH=ºH>ºG@·F@°C@¦=:97—<;‘=;ˆ>;€A5i=4j>5j>5k?6s63r73q62p62n72l71j81i81d8/d90c;1d>3d@4cA5cA5bB5VG4^OmmSsw^z‚jcmU2>(5C,4:039/39/39/28.28.28.17-17-17-17-06,06,/5+/5+/5+-2,-2,-2,-2,-2,-2,-2,-2,,1+,1++0**/)*/)+0*,1+,1++5-+5-*4,*4,+5,+5,,6+-7,,7)/:,2=/6A17B27B25@/4?.2?+5B.:G3>L5AO6ES:JX?M[BTbI]kTcqZ_lXUbPERA2>0#/#(..&,,$**heVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheVjdTjdVjcYkd\lc\md]lfZlfVomXmmUimVgkZembr{xŽ—œ¨±ºÊÓØäëñöþÿ÷üÿøüÿþÿÿÿÿÿúù÷ÿÿúýýõøøîðòåéëÝåéÚåéØåìÚæíÎèïÐéîÐæéÎèæÏèãÏáÚÈÙÏÃÚÍÄßÒÌìÞÛúììÿôöÿõùÿõûÿøþýýûÿÿýÿÿýþþüþþüÿÿýÿÿýýýûþþüþþüþþüþþüþþüþþüþþüþþüÿüúÿýúÿûøùýüøÿÿôÿÿðÿÿêþüðÿûùÿûÿÿôÿöæÿôßÿãÍ×­”¢sY°SA®Q?®N>°O?±OB¯J@¥C:š<4—<7‘>8‰?6ƒ@7{B7tD6qE8nG8s>:s>:s>:q>:q>:q>:q>:p?:sB=rA8l=7l=7m>8n?9r73r73q73n72m82j81i81f:1f;2d>3d@4bB5`C5]A3\@2[?1QI4[S>f^Gg_H`Y?ZS9ZS7\W:ZV;WW;knSrx^u}eUaI%37E.4:04:04:039/39/39/28.28.17-17-17-06,06,/5+/5+/5+-2,-2,-2,-2,-2,-2,-2,-2,,1++0*+0**/)*/)+0*+0*,1+)3+)3+*4,+5-+5,,6--7.-7,,6+.8-2=/6A39D69D67B46A1/<*2?-5B09F2:u@:s@9o>9o>9n72n72n93m;4l;4j;3g<3d<2c?3^>1dG9cG9T=-O8(M8'D/TR;PN7KI0MK2]Y>ieJeaDVU7XX<]`CosXz€fcmT=I1,:#1?(5;15;14:04:04:039/39/39/39/39/39/28.17-17-17-06,16016005/05//4./4./4./4.,1+,1+,1+,1+,1+,1++0*+0*.5.-4--4-,3,-4--4-.5-.5-+2*-4,08-5=29A6=E:?G7B25@03>-1<+2>*9E/BN8IU?O[EVbN]hWYdTLWIF5F4‰D4…D2}B0yB.s@-o?+v?:t=8u>9v?:t?9q<6r=7sA:q?8q?8q?8o>7o>7n=6n=6n=6l;4m<5m>6k?6j?6h@6eA5cA5dG9[A2^G7\I8N=+F7$G8%A4!IM4GK2DG,BE*MM1[[?abC`aBYY=dgJsw\sy_X`H8D,/;%6D-7=36<26<26<25;15;15;15;15;15;15;14:04:039/39/39/27127127116016016005/05/.3-.3--2,-2,,1+,1++0*+0**1**1*)0))0))0)*1*+2+,3,.5--4,.5-07/4;39@8?F>BIA:G69F56C13@.2?+5B.;I2?M6KXDR_KXeSVcRKWI8p;5q<6vA;sA:p>7r@9xG@n=6n=6n=6m>6l=5l=5l=5l=5g?5h@6gA6gC7eC7cC6`C5^D5aL;UB1ZI7`S@RG3C;&E=(GA+>G,BH.@F*<@%?B%LO2_`AijKaaEnqTvz_gmSHP84<%4=(=F18>48>48>48>47=37=37=36<28>48>47=37=37=36<26<26<25:449349349338238238227105/05//4..3--2,,1++0*+0*(/((/((/((/((/()0)*1*+2+070.5.+2++2+.5.5<5K:4-9/-3/-3/,2.gdUgdUheVheVheVheVifWifWifWifWifWifWifWifWifWifWleUldWlcZmd]md]mf^mg[khWmlWimThpXht`hthm|wˆ—š¥´»ÀÉÐÔÛáéðööûÿúþÿýþÿÿÿýÿþúþþöýýñúûí÷úéô÷âîóÝçìÕàèÐÜà¿×Ú»ÖÖ¼Ù×ÂÝ×ÉßÖÍåÛÙìàâøìðüïöÿõûÿùþÿúýÿûûÿûûÿýúþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüöÿþ÷ÿþúÿþþþÿÿüÿÿùÿÿøÿÿ÷þÿøÿÿøüÿùùÿýúÿÿøþÿøúÿõöÿóÿþìÿýéÿòßÿñÛÿðÚñÒ½³zyS3i?3i?3i?3f>2f>2f>2f>2aA4`C5`C5_C5^D5[D4ZE4VE3XI6OB/\T?oiSc^HMK4IG0LJ3;E*?H->G*48>47=37=37=39?58>48>48>48>48>48>48>47<67<67<66;56;56;55:45:438238216005//4.-2,,1+,1++0,+0,*/+*/++0,,1--2.-2.051.3/+0,+0,-2.2738=9'4.:0.5..5.-4-gdUgdUgdUheVheVifWifWifWifWifWifWifWifWifWifWifWleUldWlcZmd]md]mf^mg[khWkmWjnUiqYgs_drejyt…”—¡²¹¾ÇÎÓÚâèïõôùýùýÿýþÿÿÿýÿÿúÿÿøÿÿóþÿñûþë÷úåðõÞèîÔàéÎÛܽÕÕ¹ÑÑ·ÔѾÚÔÈáØÓêàßôéíþóùÿöþÿûÿÿýÿÿþÿÿþúÿþúþÿùþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüøÿÿøÿÿûÿÿþþþÿýþÿûüÿûúÿúúÿùùÿù÷ÿù÷ÿüùÿÿûþÿûûÿüùÿûùôîÿÿöÿþôÿýóÿüîÿ÷çùçÓéӾϴŸ¶š„•u`yVBlI5mH6rM;uP>mF7iB3gB2jE5nI9oJ:pK;oK;eA1eA1cB1cB1cB1cB1cB1bC1\G6\G6\G6ZG6YH6WH5TG4RG3PH3MH2fdM~~fprZVX@IM4HL3;E*A.;>+9?59?59?58>48>47=37=37=38>48>48>48>48>48>48>48>49>89>89>88=78=78=77<67<66;55:449338227105//4./4.-2.-2.,1-+0,+0,,1--2.-2.,1-,1-,1-,1-.21043376598:H7=L9@O<@O:8F91?2,9/.5.-4-,3,fcTfcTgdUheVheVifWjgXjgXifWifWifWifWifWifWifWifWleUldWlcZmd]md]mf^mg[khWkmWioUiqYgs_bpcgxr‚”– ³¹ÁÊÑÕÜäéðöõúþùýÿýÿþÿÿýÿÿúÿÿöÿÿôÿÿñÿÿïúýèò÷àéïÕàéÎÙÚ»ÑѵÍË´Î˺ÖÏÅßÕÓìâãøíóÿöþÿùÿÿüÿÿýÿÿÿýþÿúýÿ÷þÿøþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüýýÿýþÿýþÿýÿþþþüþÿùþÿ÷ÿÿõýýóýýõþýøþýùÿþüÿýÿÿýÿÿþÿþùÿÿüÿÿúþúöõýøôÿþöÿþñÿþïÿûéÿóàöåÓåÓ¿Ò»©¹ŸŸƒuŽrd|]I}^JrVAaE0W;&Y=(Z?*X=(`E0`E0_F0_F0`G1`G1^H1^H1[L9ZM:ZM:XM9XM9UM8RL6QL6NL5QQ9ikS|€glrXSY?DM2>G,:G+48>48>48>47=37=38>48>48>48>49?59?5:?9:?9:?9:?99>89>89>88=78=78=77<66;55:4493382382/40.3/-2.,1-+0,+0,+0,+0,+/.,0/-10.21/32/32/32.210A.5F3;M7>P:=O7:L47I/6H.3E-6H0:L6MJ9EB1;A7;A7;A7;A7:@6:@6:@69?58>48>48>49?59?5:@6:@6:@6;@:;@:;@::?9:?99>89>89>8:?9:?99>89>88=78=77<67<6495273162/40-2.,1-+0,+/.,0/,0/-10.21.21.23-12,01):'/@-6H2;M5=O7?I.9F*?L0=J.AN2DN3HQ4LR6IN0JM0ZY;miLhdIc]C_YA_ZD`[GZUBQN=LI8=C9=C9=C989>89>8;@:;@:;@:;@::?9:?9:?9:?99>:8=95:6384162/40.3/.21.21.21-10-12,01,01-12-12$5"*<&3E/9K3XW9UT6SR3KE/JD.FA-D?,A>/@>1??3>@5<=5;>59?59A67B48C57C57D3:B79A69A68@58@59A69A6:B7:B7:B79A6:B7;C8F;7B:7C97A66A16?.4<-39-270.5./51-7/-9+-<%.B3J7O7Z 8Y$8W+:U2:R8;P==O?>O=:L6@R8EX:EZ;DY:>U93J0(>'.5-,3++2*ZgM[hN\hP_iQakSckTglXhkXghVihVifWifWkeWmeXmeZnf[khWkhYkg[kg^jf]jf]hfZgeVgjWglVfoZerajwnzŠ‰š«²·ÉÓÑØÞáéìò÷úøþþùþúúÿøûþóúüï÷úé÷øæõôâíìØéæÓåâÏÜ×ÄÑ̹˾­Á´¤º¬Ÿ¼¯§Á¶²ÌÀÀÛÐÖèÞæûóþý÷ÿþûÿÿþÿþýÿüýÿüýÿüýÿþþþþþþþþþþþþþþþþþþÿþüÿþüÿþüÿýúÿýúÿüùÿüùÿýùÿýùÿþúÿþýÿýüÿüûÿýþÿþÿÿþÿÿýþýûüÿþÿÿýýÿüùÿøóøíçòåÝöèßÿïçÿûÿÿýÿÿýþÿÿýÿÿûýÿüýÿþüýÿýþÿþýÿÿýÿÿýþÿý÷ÿþîÿÿæÿÿâ÷÷ßýûââàÇ‹‡lRM0TM0QK+SJ+WN/UO/UN1TO1SO2QP4QP4PP6QM2PO3PN5PP6MO7KO6HM6EM5HQ6EN3BK.AH)BI(GM+JP,KQ-NR/PT1VZ9^aBaaE[[?VVVV>XV=YW>XW;XW9WV8VU7QK5OI3LG3ID1DA2B@3??3>@5<=5;>59?59A67B48C57C57D3:B79A69A68@58@59A69A6:B7:B7:B7:B7:B7;C8F;76<83=51=/3B+9M*BY-Ia1Nq7Mn9Ji=Fa>AY?:L<:K9=O9DV5:@69A67B47B47C57D3:B7:B79A69A69A69A6:B7:B7:B7:B7:B7:B7;C8F;>F;>IA>J@?I>>I9?H7>F7>D8=B;>E>;A=6@85A39H1BV3Pg;ZrB]€F\}HVuIMhEBZ@9N;5G74E3XR6F;?G<>H=>I9?H7>F7>D8=B;=D=;A=6@85A39H1DX5Ri=]uEY|BXyDRqEIdA,6H2@R8L_AQfGShIMdH@W=4J329107/-4,YgMZhN\hP^jRblTemVgoZjo[lo\lm[mk\mj[nhZnhZoi]ph]liXkhYjfZie\ie\ie\ig[igXfiVchRajUerao|s{‹ŠŽŸ¦Ÿ±»ÂËÒÕÜäéðöòúüôúøñöðíðçéëÞáãÕÚÛËÒÑ¿ÌɶÉıþ«¾¹¦»´¢Ë¾®ÓŸÝÏÄæÙÑíâà÷ëíÿôúÿøÿÿ÷ÿÿúÿÿüÿþýÿýüÿûüþüþýþÿÿþþþþþþþþþþþþþþþþþþÿþüÿþüþýûÿüùÿýúÿýúÿýúÿû÷ÿúöþùõÿýüÿûúýùøüúûþüýÿýþÿþÿÿýþÿüýÿüüÿüùÿøó÷ìæòåÝøêáÿóëÿûÿÿýÿÿýþÿÿûÿÿûýÿúýÿüüýÿüýÿþýÿÿþÿÿþýÿþõÿüìÿüãÿúÝþýèÿÿëåãÌŒˆoRL2UN2TM0WN1VM.UO/WP3VQ3UQ4QP2ON2MM1PL1NM1NL3MM3LN6LP7KP9JR:LU:IR7JS6QX9SZ9U[9]c?gmI€”a’¦sŸ±š«’¡xˆ”pr|Z\bFLP7KM7LK6KI4NI5PK7TM:VP:WQ;VP:SN:QL9LI:IG:EE9CE:=>6F;?G<=G<=H8>G6=E6=C7=B;:A:9?;5?75A39H1BV3Ne9Wo?Sv /* to declare isdigit() */ - - -#if TRANSFORMS_SUPPORTED - -/* - * Lossless image transformation routines. These routines work on DCT - * coefficient arrays and thus do not require any lossy decompression - * or recompression of the image. - * Thanks to Guido Vollbeding for the initial design and code of this feature, - * and to Ben Jackson for introducing the cropping feature. - * - * Horizontal flipping is done in-place, using a single top-to-bottom - * pass through the virtual source array. It will thus be much the - * fastest option for images larger than main memory. - * - * The other routines require a set of destination virtual arrays, so they - * need twice as much memory as jpegtran normally does. The destination - * arrays are always written in normal scan order (top to bottom) because - * the virtual array manager expects this. The source arrays will be scanned - * in the corresponding order, which means multiple passes through the source - * arrays for most of the transforms. That could result in much thrashing - * if the image is larger than main memory. - * - * If cropping or trimming is involved, the destination arrays may be smaller - * than the source arrays. Note it is not possible to do horizontal flip - * in-place when a nonzero Y crop offset is specified, since we'd have to move - * data from one block row to another but the virtual array manager doesn't - * guarantee we can touch more than one row at a time. So in that case, - * we have to use a separate destination array. - * - * Some notes about the operating environment of the individual transform - * routines: - * 1. Both the source and destination virtual arrays are allocated from the - * source JPEG object, and therefore should be manipulated by calling the - * source's memory manager. - * 2. The destination's component count should be used. It may be smaller - * than the source's when forcing to grayscale. - * 3. Likewise the destination's sampling factors should be used. When - * forcing to grayscale the destination's sampling factors will be all 1, - * and we may as well take that as the effective iMCU size. - * 4. When "trim" is in effect, the destination's dimensions will be the - * trimmed values but the source's will be untrimmed. - * 5. When "crop" is in effect, the destination's dimensions will be the - * cropped values but the source's will be uncropped. Each transform - * routine is responsible for picking up source data starting at the - * correct X and Y offset for the crop region. (The X and Y offsets - * passed to the transform routines are measured in iMCU blocks of the - * destination.) - * 6. All the routines assume that the source and destination buffers are - * padded out to a full iMCU boundary. This is true, although for the - * source buffer it is an undocumented property of jdcoefct.c. - */ - - -LOCAL(void) -do_crop (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, - JDIMENSION x_crop_offset, JDIMENSION y_crop_offset, - jvirt_barray_ptr *src_coef_arrays, - jvirt_barray_ptr *dst_coef_arrays) -/* Crop. This is only used when no rotate/flip is requested with the crop. */ -{ - JDIMENSION dst_blk_y, x_crop_blocks, y_crop_blocks; - int ci, offset_y; - JBLOCKARRAY src_buffer, dst_buffer; - jpeg_component_info *compptr; - - /* We simply have to copy the right amount of data (the destination's - * image size) starting at the given X and Y offsets in the source. - */ - for (ci = 0; ci < dstinfo->num_components; ci++) { - compptr = dstinfo->comp_info + ci; - x_crop_blocks = x_crop_offset * compptr->h_samp_factor; - y_crop_blocks = y_crop_offset * compptr->v_samp_factor; - for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks; - dst_blk_y += compptr->v_samp_factor) { - dst_buffer = (*srcinfo->mem->access_virt_barray) - ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y, - (JDIMENSION) compptr->v_samp_factor, TRUE); - src_buffer = (*srcinfo->mem->access_virt_barray) - ((j_common_ptr) srcinfo, src_coef_arrays[ci], - dst_blk_y + y_crop_blocks, - (JDIMENSION) compptr->v_samp_factor, FALSE); - for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { - jcopy_block_row(src_buffer[offset_y] + x_crop_blocks, - dst_buffer[offset_y], - compptr->width_in_blocks); - } - } - } -} - - -LOCAL(void) -do_flip_h_no_crop (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, - JDIMENSION x_crop_offset, - jvirt_barray_ptr *src_coef_arrays) -/* Horizontal flip; done in-place, so no separate dest array is required. - * NB: this only works when y_crop_offset is zero. - */ -{ - JDIMENSION MCU_cols, comp_width, blk_x, blk_y, x_crop_blocks; - int ci, k, offset_y; - JBLOCKARRAY buffer; - JCOEFPTR ptr1, ptr2; - JCOEF temp1, temp2; - jpeg_component_info *compptr; - - /* Horizontal mirroring of DCT blocks is accomplished by swapping - * pairs of blocks in-place. Within a DCT block, we perform horizontal - * mirroring by changing the signs of odd-numbered columns. - * Partial iMCUs at the right edge are left untouched. - */ - MCU_cols = srcinfo->output_width / - (dstinfo->max_h_samp_factor * dstinfo->min_DCT_h_scaled_size); - - for (ci = 0; ci < dstinfo->num_components; ci++) { - compptr = dstinfo->comp_info + ci; - comp_width = MCU_cols * compptr->h_samp_factor; - x_crop_blocks = x_crop_offset * compptr->h_samp_factor; - for (blk_y = 0; blk_y < compptr->height_in_blocks; - blk_y += compptr->v_samp_factor) { - buffer = (*srcinfo->mem->access_virt_barray) - ((j_common_ptr) srcinfo, src_coef_arrays[ci], blk_y, - (JDIMENSION) compptr->v_samp_factor, TRUE); - for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { - /* Do the mirroring */ - for (blk_x = 0; blk_x * 2 < comp_width; blk_x++) { - ptr1 = buffer[offset_y][blk_x]; - ptr2 = buffer[offset_y][comp_width - blk_x - 1]; - /* this unrolled loop doesn't need to know which row it's on... */ - for (k = 0; k < DCTSIZE2; k += 2) { - temp1 = *ptr1; /* swap even column */ - temp2 = *ptr2; - *ptr1++ = temp2; - *ptr2++ = temp1; - temp1 = *ptr1; /* swap odd column with sign change */ - temp2 = *ptr2; - *ptr1++ = -temp2; - *ptr2++ = -temp1; - } - } - if (x_crop_blocks > 0) { - /* Now left-justify the portion of the data to be kept. - * We can't use a single jcopy_block_row() call because that routine - * depends on memcpy(), whose behavior is unspecified for overlapping - * source and destination areas. Sigh. - */ - for (blk_x = 0; blk_x < compptr->width_in_blocks; blk_x++) { - jcopy_block_row(buffer[offset_y] + blk_x + x_crop_blocks, - buffer[offset_y] + blk_x, - (JDIMENSION) 1); - } - } - } - } - } -} - - -LOCAL(void) -do_flip_h (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, - JDIMENSION x_crop_offset, JDIMENSION y_crop_offset, - jvirt_barray_ptr *src_coef_arrays, - jvirt_barray_ptr *dst_coef_arrays) -/* Horizontal flip in general cropping case */ -{ - JDIMENSION MCU_cols, comp_width, dst_blk_x, dst_blk_y; - JDIMENSION x_crop_blocks, y_crop_blocks; - int ci, k, offset_y; - JBLOCKARRAY src_buffer, dst_buffer; - JBLOCKROW src_row_ptr, dst_row_ptr; - JCOEFPTR src_ptr, dst_ptr; - jpeg_component_info *compptr; - - /* Here we must output into a separate array because we can't touch - * different rows of a single virtual array simultaneously. Otherwise, - * this is essentially the same as the routine above. - */ - MCU_cols = srcinfo->output_width / - (dstinfo->max_h_samp_factor * dstinfo->min_DCT_h_scaled_size); - - for (ci = 0; ci < dstinfo->num_components; ci++) { - compptr = dstinfo->comp_info + ci; - comp_width = MCU_cols * compptr->h_samp_factor; - x_crop_blocks = x_crop_offset * compptr->h_samp_factor; - y_crop_blocks = y_crop_offset * compptr->v_samp_factor; - for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks; - dst_blk_y += compptr->v_samp_factor) { - dst_buffer = (*srcinfo->mem->access_virt_barray) - ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y, - (JDIMENSION) compptr->v_samp_factor, TRUE); - src_buffer = (*srcinfo->mem->access_virt_barray) - ((j_common_ptr) srcinfo, src_coef_arrays[ci], - dst_blk_y + y_crop_blocks, - (JDIMENSION) compptr->v_samp_factor, FALSE); - for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { - dst_row_ptr = dst_buffer[offset_y]; - src_row_ptr = src_buffer[offset_y]; - for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; dst_blk_x++) { - if (x_crop_blocks + dst_blk_x < comp_width) { - /* Do the mirrorable blocks */ - dst_ptr = dst_row_ptr[dst_blk_x]; - src_ptr = src_row_ptr[comp_width - x_crop_blocks - dst_blk_x - 1]; - /* this unrolled loop doesn't need to know which row it's on... */ - for (k = 0; k < DCTSIZE2; k += 2) { - *dst_ptr++ = *src_ptr++; /* copy even column */ - *dst_ptr++ = - *src_ptr++; /* copy odd column with sign change */ - } - } else { - /* Copy last partial block(s) verbatim */ - jcopy_block_row(src_row_ptr + dst_blk_x + x_crop_blocks, - dst_row_ptr + dst_blk_x, - (JDIMENSION) 1); - } - } - } - } - } -} - - -LOCAL(void) -do_flip_v (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, - JDIMENSION x_crop_offset, JDIMENSION y_crop_offset, - jvirt_barray_ptr *src_coef_arrays, - jvirt_barray_ptr *dst_coef_arrays) -/* Vertical flip */ -{ - JDIMENSION MCU_rows, comp_height, dst_blk_x, dst_blk_y; - JDIMENSION x_crop_blocks, y_crop_blocks; - int ci, i, j, offset_y; - JBLOCKARRAY src_buffer, dst_buffer; - JBLOCKROW src_row_ptr, dst_row_ptr; - JCOEFPTR src_ptr, dst_ptr; - jpeg_component_info *compptr; - - /* We output into a separate array because we can't touch different - * rows of the source virtual array simultaneously. Otherwise, this - * is a pretty straightforward analog of horizontal flip. - * Within a DCT block, vertical mirroring is done by changing the signs - * of odd-numbered rows. - * Partial iMCUs at the bottom edge are copied verbatim. - */ - MCU_rows = srcinfo->output_height / - (dstinfo->max_v_samp_factor * dstinfo->min_DCT_v_scaled_size); - - for (ci = 0; ci < dstinfo->num_components; ci++) { - compptr = dstinfo->comp_info + ci; - comp_height = MCU_rows * compptr->v_samp_factor; - x_crop_blocks = x_crop_offset * compptr->h_samp_factor; - y_crop_blocks = y_crop_offset * compptr->v_samp_factor; - for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks; - dst_blk_y += compptr->v_samp_factor) { - dst_buffer = (*srcinfo->mem->access_virt_barray) - ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y, - (JDIMENSION) compptr->v_samp_factor, TRUE); - if (y_crop_blocks + dst_blk_y < comp_height) { - /* Row is within the mirrorable area. */ - src_buffer = (*srcinfo->mem->access_virt_barray) - ((j_common_ptr) srcinfo, src_coef_arrays[ci], - comp_height - y_crop_blocks - dst_blk_y - - (JDIMENSION) compptr->v_samp_factor, - (JDIMENSION) compptr->v_samp_factor, FALSE); - } else { - /* Bottom-edge blocks will be copied verbatim. */ - src_buffer = (*srcinfo->mem->access_virt_barray) - ((j_common_ptr) srcinfo, src_coef_arrays[ci], - dst_blk_y + y_crop_blocks, - (JDIMENSION) compptr->v_samp_factor, FALSE); - } - for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { - if (y_crop_blocks + dst_blk_y < comp_height) { - /* Row is within the mirrorable area. */ - dst_row_ptr = dst_buffer[offset_y]; - src_row_ptr = src_buffer[compptr->v_samp_factor - offset_y - 1]; - src_row_ptr += x_crop_blocks; - for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; - dst_blk_x++) { - dst_ptr = dst_row_ptr[dst_blk_x]; - src_ptr = src_row_ptr[dst_blk_x]; - for (i = 0; i < DCTSIZE; i += 2) { - /* copy even row */ - for (j = 0; j < DCTSIZE; j++) - *dst_ptr++ = *src_ptr++; - /* copy odd row with sign change */ - for (j = 0; j < DCTSIZE; j++) - *dst_ptr++ = - *src_ptr++; - } - } - } else { - /* Just copy row verbatim. */ - jcopy_block_row(src_buffer[offset_y] + x_crop_blocks, - dst_buffer[offset_y], - compptr->width_in_blocks); - } - } - } - } -} - - -LOCAL(void) -do_transpose (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, - JDIMENSION x_crop_offset, JDIMENSION y_crop_offset, - jvirt_barray_ptr *src_coef_arrays, - jvirt_barray_ptr *dst_coef_arrays) -/* Transpose source into destination */ -{ - JDIMENSION dst_blk_x, dst_blk_y, x_crop_blocks, y_crop_blocks; - int ci, i, j, offset_x, offset_y; - JBLOCKARRAY src_buffer, dst_buffer; - JCOEFPTR src_ptr, dst_ptr; - jpeg_component_info *compptr; - - /* Transposing pixels within a block just requires transposing the - * DCT coefficients. - * Partial iMCUs at the edges require no special treatment; we simply - * process all the available DCT blocks for every component. - */ - for (ci = 0; ci < dstinfo->num_components; ci++) { - compptr = dstinfo->comp_info + ci; - x_crop_blocks = x_crop_offset * compptr->h_samp_factor; - y_crop_blocks = y_crop_offset * compptr->v_samp_factor; - for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks; - dst_blk_y += compptr->v_samp_factor) { - dst_buffer = (*srcinfo->mem->access_virt_barray) - ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y, - (JDIMENSION) compptr->v_samp_factor, TRUE); - for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { - for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; - dst_blk_x += compptr->h_samp_factor) { - src_buffer = (*srcinfo->mem->access_virt_barray) - ((j_common_ptr) srcinfo, src_coef_arrays[ci], - dst_blk_x + x_crop_blocks, - (JDIMENSION) compptr->h_samp_factor, FALSE); - for (offset_x = 0; offset_x < compptr->h_samp_factor; offset_x++) { - dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x]; - src_ptr = src_buffer[offset_x][dst_blk_y + offset_y + y_crop_blocks]; - for (i = 0; i < DCTSIZE; i++) - for (j = 0; j < DCTSIZE; j++) - dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; - } - } - } - } - } -} - - -LOCAL(void) -do_rot_90 (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, - JDIMENSION x_crop_offset, JDIMENSION y_crop_offset, - jvirt_barray_ptr *src_coef_arrays, - jvirt_barray_ptr *dst_coef_arrays) -/* 90 degree rotation is equivalent to - * 1. Transposing the image; - * 2. Horizontal mirroring. - * These two steps are merged into a single processing routine. - */ -{ - JDIMENSION MCU_cols, comp_width, dst_blk_x, dst_blk_y; - JDIMENSION x_crop_blocks, y_crop_blocks; - int ci, i, j, offset_x, offset_y; - JBLOCKARRAY src_buffer, dst_buffer; - JCOEFPTR src_ptr, dst_ptr; - jpeg_component_info *compptr; - - /* Because of the horizontal mirror step, we can't process partial iMCUs - * at the (output) right edge properly. They just get transposed and - * not mirrored. - */ - MCU_cols = srcinfo->output_height / - (dstinfo->max_h_samp_factor * dstinfo->min_DCT_h_scaled_size); - - for (ci = 0; ci < dstinfo->num_components; ci++) { - compptr = dstinfo->comp_info + ci; - comp_width = MCU_cols * compptr->h_samp_factor; - x_crop_blocks = x_crop_offset * compptr->h_samp_factor; - y_crop_blocks = y_crop_offset * compptr->v_samp_factor; - for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks; - dst_blk_y += compptr->v_samp_factor) { - dst_buffer = (*srcinfo->mem->access_virt_barray) - ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y, - (JDIMENSION) compptr->v_samp_factor, TRUE); - for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { - for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; - dst_blk_x += compptr->h_samp_factor) { - if (x_crop_blocks + dst_blk_x < comp_width) { - /* Block is within the mirrorable area. */ - src_buffer = (*srcinfo->mem->access_virt_barray) - ((j_common_ptr) srcinfo, src_coef_arrays[ci], - comp_width - x_crop_blocks - dst_blk_x - - (JDIMENSION) compptr->h_samp_factor, - (JDIMENSION) compptr->h_samp_factor, FALSE); - } else { - /* Edge blocks are transposed but not mirrored. */ - src_buffer = (*srcinfo->mem->access_virt_barray) - ((j_common_ptr) srcinfo, src_coef_arrays[ci], - dst_blk_x + x_crop_blocks, - (JDIMENSION) compptr->h_samp_factor, FALSE); - } - for (offset_x = 0; offset_x < compptr->h_samp_factor; offset_x++) { - dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x]; - if (x_crop_blocks + dst_blk_x < comp_width) { - /* Block is within the mirrorable area. */ - src_ptr = src_buffer[compptr->h_samp_factor - offset_x - 1] - [dst_blk_y + offset_y + y_crop_blocks]; - for (i = 0; i < DCTSIZE; i++) { - for (j = 0; j < DCTSIZE; j++) - dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; - i++; - for (j = 0; j < DCTSIZE; j++) - dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j]; - } - } else { - /* Edge blocks are transposed but not mirrored. */ - src_ptr = src_buffer[offset_x] - [dst_blk_y + offset_y + y_crop_blocks]; - for (i = 0; i < DCTSIZE; i++) - for (j = 0; j < DCTSIZE; j++) - dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; - } - } - } - } - } - } -} - - -LOCAL(void) -do_rot_270 (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, - JDIMENSION x_crop_offset, JDIMENSION y_crop_offset, - jvirt_barray_ptr *src_coef_arrays, - jvirt_barray_ptr *dst_coef_arrays) -/* 270 degree rotation is equivalent to - * 1. Horizontal mirroring; - * 2. Transposing the image. - * These two steps are merged into a single processing routine. - */ -{ - JDIMENSION MCU_rows, comp_height, dst_blk_x, dst_blk_y; - JDIMENSION x_crop_blocks, y_crop_blocks; - int ci, i, j, offset_x, offset_y; - JBLOCKARRAY src_buffer, dst_buffer; - JCOEFPTR src_ptr, dst_ptr; - jpeg_component_info *compptr; - - /* Because of the horizontal mirror step, we can't process partial iMCUs - * at the (output) bottom edge properly. They just get transposed and - * not mirrored. - */ - MCU_rows = srcinfo->output_width / - (dstinfo->max_v_samp_factor * dstinfo->min_DCT_v_scaled_size); - - for (ci = 0; ci < dstinfo->num_components; ci++) { - compptr = dstinfo->comp_info + ci; - comp_height = MCU_rows * compptr->v_samp_factor; - x_crop_blocks = x_crop_offset * compptr->h_samp_factor; - y_crop_blocks = y_crop_offset * compptr->v_samp_factor; - for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks; - dst_blk_y += compptr->v_samp_factor) { - dst_buffer = (*srcinfo->mem->access_virt_barray) - ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y, - (JDIMENSION) compptr->v_samp_factor, TRUE); - for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { - for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; - dst_blk_x += compptr->h_samp_factor) { - src_buffer = (*srcinfo->mem->access_virt_barray) - ((j_common_ptr) srcinfo, src_coef_arrays[ci], - dst_blk_x + x_crop_blocks, - (JDIMENSION) compptr->h_samp_factor, FALSE); - for (offset_x = 0; offset_x < compptr->h_samp_factor; offset_x++) { - dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x]; - if (y_crop_blocks + dst_blk_y < comp_height) { - /* Block is within the mirrorable area. */ - src_ptr = src_buffer[offset_x] - [comp_height - y_crop_blocks - dst_blk_y - offset_y - 1]; - for (i = 0; i < DCTSIZE; i++) { - for (j = 0; j < DCTSIZE; j++) { - dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; - j++; - dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j]; - } - } - } else { - /* Edge blocks are transposed but not mirrored. */ - src_ptr = src_buffer[offset_x] - [dst_blk_y + offset_y + y_crop_blocks]; - for (i = 0; i < DCTSIZE; i++) - for (j = 0; j < DCTSIZE; j++) - dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; - } - } - } - } - } - } -} - - -LOCAL(void) -do_rot_180 (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, - JDIMENSION x_crop_offset, JDIMENSION y_crop_offset, - jvirt_barray_ptr *src_coef_arrays, - jvirt_barray_ptr *dst_coef_arrays) -/* 180 degree rotation is equivalent to - * 1. Vertical mirroring; - * 2. Horizontal mirroring. - * These two steps are merged into a single processing routine. - */ -{ - JDIMENSION MCU_cols, MCU_rows, comp_width, comp_height, dst_blk_x, dst_blk_y; - JDIMENSION x_crop_blocks, y_crop_blocks; - int ci, i, j, offset_y; - JBLOCKARRAY src_buffer, dst_buffer; - JBLOCKROW src_row_ptr, dst_row_ptr; - JCOEFPTR src_ptr, dst_ptr; - jpeg_component_info *compptr; - - MCU_cols = srcinfo->output_width / - (dstinfo->max_h_samp_factor * dstinfo->min_DCT_h_scaled_size); - MCU_rows = srcinfo->output_height / - (dstinfo->max_v_samp_factor * dstinfo->min_DCT_v_scaled_size); - - for (ci = 0; ci < dstinfo->num_components; ci++) { - compptr = dstinfo->comp_info + ci; - comp_width = MCU_cols * compptr->h_samp_factor; - comp_height = MCU_rows * compptr->v_samp_factor; - x_crop_blocks = x_crop_offset * compptr->h_samp_factor; - y_crop_blocks = y_crop_offset * compptr->v_samp_factor; - for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks; - dst_blk_y += compptr->v_samp_factor) { - dst_buffer = (*srcinfo->mem->access_virt_barray) - ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y, - (JDIMENSION) compptr->v_samp_factor, TRUE); - if (y_crop_blocks + dst_blk_y < comp_height) { - /* Row is within the vertically mirrorable area. */ - src_buffer = (*srcinfo->mem->access_virt_barray) - ((j_common_ptr) srcinfo, src_coef_arrays[ci], - comp_height - y_crop_blocks - dst_blk_y - - (JDIMENSION) compptr->v_samp_factor, - (JDIMENSION) compptr->v_samp_factor, FALSE); - } else { - /* Bottom-edge rows are only mirrored horizontally. */ - src_buffer = (*srcinfo->mem->access_virt_barray) - ((j_common_ptr) srcinfo, src_coef_arrays[ci], - dst_blk_y + y_crop_blocks, - (JDIMENSION) compptr->v_samp_factor, FALSE); - } - for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { - dst_row_ptr = dst_buffer[offset_y]; - if (y_crop_blocks + dst_blk_y < comp_height) { - /* Row is within the mirrorable area. */ - src_row_ptr = src_buffer[compptr->v_samp_factor - offset_y - 1]; - for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; dst_blk_x++) { - dst_ptr = dst_row_ptr[dst_blk_x]; - if (x_crop_blocks + dst_blk_x < comp_width) { - /* Process the blocks that can be mirrored both ways. */ - src_ptr = src_row_ptr[comp_width - x_crop_blocks - dst_blk_x - 1]; - for (i = 0; i < DCTSIZE; i += 2) { - /* For even row, negate every odd column. */ - for (j = 0; j < DCTSIZE; j += 2) { - *dst_ptr++ = *src_ptr++; - *dst_ptr++ = - *src_ptr++; - } - /* For odd row, negate every even column. */ - for (j = 0; j < DCTSIZE; j += 2) { - *dst_ptr++ = - *src_ptr++; - *dst_ptr++ = *src_ptr++; - } - } - } else { - /* Any remaining right-edge blocks are only mirrored vertically. */ - src_ptr = src_row_ptr[x_crop_blocks + dst_blk_x]; - for (i = 0; i < DCTSIZE; i += 2) { - for (j = 0; j < DCTSIZE; j++) - *dst_ptr++ = *src_ptr++; - for (j = 0; j < DCTSIZE; j++) - *dst_ptr++ = - *src_ptr++; - } - } - } - } else { - /* Remaining rows are just mirrored horizontally. */ - src_row_ptr = src_buffer[offset_y]; - for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; dst_blk_x++) { - if (x_crop_blocks + dst_blk_x < comp_width) { - /* Process the blocks that can be mirrored. */ - dst_ptr = dst_row_ptr[dst_blk_x]; - src_ptr = src_row_ptr[comp_width - x_crop_blocks - dst_blk_x - 1]; - for (i = 0; i < DCTSIZE2; i += 2) { - *dst_ptr++ = *src_ptr++; - *dst_ptr++ = - *src_ptr++; - } - } else { - /* Any remaining right-edge blocks are only copied. */ - jcopy_block_row(src_row_ptr + dst_blk_x + x_crop_blocks, - dst_row_ptr + dst_blk_x, - (JDIMENSION) 1); - } - } - } - } - } - } -} - - -LOCAL(void) -do_transverse (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, - JDIMENSION x_crop_offset, JDIMENSION y_crop_offset, - jvirt_barray_ptr *src_coef_arrays, - jvirt_barray_ptr *dst_coef_arrays) -/* Transverse transpose is equivalent to - * 1. 180 degree rotation; - * 2. Transposition; - * or - * 1. Horizontal mirroring; - * 2. Transposition; - * 3. Horizontal mirroring. - * These steps are merged into a single processing routine. - */ -{ - JDIMENSION MCU_cols, MCU_rows, comp_width, comp_height, dst_blk_x, dst_blk_y; - JDIMENSION x_crop_blocks, y_crop_blocks; - int ci, i, j, offset_x, offset_y; - JBLOCKARRAY src_buffer, dst_buffer; - JCOEFPTR src_ptr, dst_ptr; - jpeg_component_info *compptr; - - MCU_cols = srcinfo->output_height / - (dstinfo->max_h_samp_factor * dstinfo->min_DCT_h_scaled_size); - MCU_rows = srcinfo->output_width / - (dstinfo->max_v_samp_factor * dstinfo->min_DCT_v_scaled_size); - - for (ci = 0; ci < dstinfo->num_components; ci++) { - compptr = dstinfo->comp_info + ci; - comp_width = MCU_cols * compptr->h_samp_factor; - comp_height = MCU_rows * compptr->v_samp_factor; - x_crop_blocks = x_crop_offset * compptr->h_samp_factor; - y_crop_blocks = y_crop_offset * compptr->v_samp_factor; - for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks; - dst_blk_y += compptr->v_samp_factor) { - dst_buffer = (*srcinfo->mem->access_virt_barray) - ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y, - (JDIMENSION) compptr->v_samp_factor, TRUE); - for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { - for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; - dst_blk_x += compptr->h_samp_factor) { - if (x_crop_blocks + dst_blk_x < comp_width) { - /* Block is within the mirrorable area. */ - src_buffer = (*srcinfo->mem->access_virt_barray) - ((j_common_ptr) srcinfo, src_coef_arrays[ci], - comp_width - x_crop_blocks - dst_blk_x - - (JDIMENSION) compptr->h_samp_factor, - (JDIMENSION) compptr->h_samp_factor, FALSE); - } else { - src_buffer = (*srcinfo->mem->access_virt_barray) - ((j_common_ptr) srcinfo, src_coef_arrays[ci], - dst_blk_x + x_crop_blocks, - (JDIMENSION) compptr->h_samp_factor, FALSE); - } - for (offset_x = 0; offset_x < compptr->h_samp_factor; offset_x++) { - dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x]; - if (y_crop_blocks + dst_blk_y < comp_height) { - if (x_crop_blocks + dst_blk_x < comp_width) { - /* Block is within the mirrorable area. */ - src_ptr = src_buffer[compptr->h_samp_factor - offset_x - 1] - [comp_height - y_crop_blocks - dst_blk_y - offset_y - 1]; - for (i = 0; i < DCTSIZE; i++) { - for (j = 0; j < DCTSIZE; j++) { - dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; - j++; - dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j]; - } - i++; - for (j = 0; j < DCTSIZE; j++) { - dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j]; - j++; - dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; - } - } - } else { - /* Right-edge blocks are mirrored in y only */ - src_ptr = src_buffer[offset_x] - [comp_height - y_crop_blocks - dst_blk_y - offset_y - 1]; - for (i = 0; i < DCTSIZE; i++) { - for (j = 0; j < DCTSIZE; j++) { - dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; - j++; - dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j]; - } - } - } - } else { - if (x_crop_blocks + dst_blk_x < comp_width) { - /* Bottom-edge blocks are mirrored in x only */ - src_ptr = src_buffer[compptr->h_samp_factor - offset_x - 1] - [dst_blk_y + offset_y + y_crop_blocks]; - for (i = 0; i < DCTSIZE; i++) { - for (j = 0; j < DCTSIZE; j++) - dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; - i++; - for (j = 0; j < DCTSIZE; j++) - dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j]; - } - } else { - /* At lower right corner, just transpose, no mirroring */ - src_ptr = src_buffer[offset_x] - [dst_blk_y + offset_y + y_crop_blocks]; - for (i = 0; i < DCTSIZE; i++) - for (j = 0; j < DCTSIZE; j++) - dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; - } - } - } - } - } - } - } -} - - -/* Parse an unsigned integer: subroutine for jtransform_parse_crop_spec. - * Returns TRUE if valid integer found, FALSE if not. - * *strptr is advanced over the digit string, and *result is set to its value. - */ - -LOCAL(boolean) -jt_read_integer (const char ** strptr, JDIMENSION * result) -{ - const char * ptr = *strptr; - JDIMENSION val = 0; - - for (; isdigit(*ptr); ptr++) { - val = val * 10 + (JDIMENSION) (*ptr - '0'); - } - *result = val; - if (ptr == *strptr) - return FALSE; /* oops, no digits */ - *strptr = ptr; - return TRUE; -} - - -/* Parse a crop specification (written in X11 geometry style). - * The routine returns TRUE if the spec string is valid, FALSE if not. - * - * The crop spec string should have the format - * [f]x[f]{+-}{+-} - * where width, height, xoffset, and yoffset are unsigned integers. - * Each of the elements can be omitted to indicate a default value. - * (A weakness of this style is that it is not possible to omit xoffset - * while specifying yoffset, since they look alike.) - * - * This code is loosely based on XParseGeometry from the X11 distribution. - */ - -GLOBAL(boolean) -jtransform_parse_crop_spec (jpeg_transform_info *info, const char *spec) -{ - info->crop = FALSE; - info->crop_width_set = JCROP_UNSET; - info->crop_height_set = JCROP_UNSET; - info->crop_xoffset_set = JCROP_UNSET; - info->crop_yoffset_set = JCROP_UNSET; - - if (isdigit(*spec)) { - /* fetch width */ - if (! jt_read_integer(&spec, &info->crop_width)) - return FALSE; - if (*spec == 'f' || *spec == 'F') { - spec++; - info->crop_width_set = JCROP_FORCE; - } else - info->crop_width_set = JCROP_POS; - } - if (*spec == 'x' || *spec == 'X') { - /* fetch height */ - spec++; - if (! jt_read_integer(&spec, &info->crop_height)) - return FALSE; - if (*spec == 'f' || *spec == 'F') { - spec++; - info->crop_height_set = JCROP_FORCE; - } else - info->crop_height_set = JCROP_POS; - } - if (*spec == '+' || *spec == '-') { - /* fetch xoffset */ - info->crop_xoffset_set = (*spec == '-') ? JCROP_NEG : JCROP_POS; - spec++; - if (! jt_read_integer(&spec, &info->crop_xoffset)) - return FALSE; - } - if (*spec == '+' || *spec == '-') { - /* fetch yoffset */ - info->crop_yoffset_set = (*spec == '-') ? JCROP_NEG : JCROP_POS; - spec++; - if (! jt_read_integer(&spec, &info->crop_yoffset)) - return FALSE; - } - /* We had better have gotten to the end of the string. */ - if (*spec != '\0') - return FALSE; - info->crop = TRUE; - return TRUE; -} - - -/* Trim off any partial iMCUs on the indicated destination edge */ - -LOCAL(void) -trim_right_edge (jpeg_transform_info *info, JDIMENSION full_width) -{ - JDIMENSION MCU_cols; - - MCU_cols = info->output_width / info->iMCU_sample_width; - if (MCU_cols > 0 && info->x_crop_offset + MCU_cols == - full_width / info->iMCU_sample_width) - info->output_width = MCU_cols * info->iMCU_sample_width; -} - -LOCAL(void) -trim_bottom_edge (jpeg_transform_info *info, JDIMENSION full_height) -{ - JDIMENSION MCU_rows; - - MCU_rows = info->output_height / info->iMCU_sample_height; - if (MCU_rows > 0 && info->y_crop_offset + MCU_rows == - full_height / info->iMCU_sample_height) - info->output_height = MCU_rows * info->iMCU_sample_height; -} - - -/* Request any required workspace. - * - * This routine figures out the size that the output image will be - * (which implies that all the transform parameters must be set before - * it is called). - * - * We allocate the workspace virtual arrays from the source decompression - * object, so that all the arrays (both the original data and the workspace) - * will be taken into account while making memory management decisions. - * Hence, this routine must be called after jpeg_read_header (which reads - * the image dimensions) and before jpeg_read_coefficients (which realizes - * the source's virtual arrays). - * - * This function returns FALSE right away if -perfect is given - * and transformation is not perfect. Otherwise returns TRUE. - */ - -GLOBAL(boolean) -jtransform_request_workspace (j_decompress_ptr srcinfo, - jpeg_transform_info *info) -{ - jvirt_barray_ptr *coef_arrays; - boolean need_workspace, transpose_it; - jpeg_component_info *compptr; - JDIMENSION xoffset, yoffset; - JDIMENSION width_in_iMCUs, height_in_iMCUs; - JDIMENSION width_in_blocks, height_in_blocks; - int ci, h_samp_factor, v_samp_factor; - - /* Determine number of components in output image */ - if (info->force_grayscale && - srcinfo->jpeg_color_space == JCS_YCbCr && - srcinfo->num_components == 3) - /* We'll only process the first component */ - info->num_components = 1; - else - /* Process all the components */ - info->num_components = srcinfo->num_components; - - /* Compute output image dimensions and related values. */ - jpeg_core_output_dimensions(srcinfo); - - /* Return right away if -perfect is given and transformation is not perfect. - */ - if (info->perfect) { - if (info->num_components == 1) { - if (!jtransform_perfect_transform(srcinfo->output_width, - srcinfo->output_height, - srcinfo->min_DCT_h_scaled_size, - srcinfo->min_DCT_v_scaled_size, - info->transform)) - return FALSE; - } else { - if (!jtransform_perfect_transform(srcinfo->output_width, - srcinfo->output_height, - srcinfo->max_h_samp_factor * srcinfo->min_DCT_h_scaled_size, - srcinfo->max_v_samp_factor * srcinfo->min_DCT_v_scaled_size, - info->transform)) - return FALSE; - } - } - - /* If there is only one output component, force the iMCU size to be 1; - * else use the source iMCU size. (This allows us to do the right thing - * when reducing color to grayscale, and also provides a handy way of - * cleaning up "funny" grayscale images whose sampling factors are not 1x1.) - */ - switch (info->transform) { - case JXFORM_TRANSPOSE: - case JXFORM_TRANSVERSE: - case JXFORM_ROT_90: - case JXFORM_ROT_270: - info->output_width = srcinfo->output_height; - info->output_height = srcinfo->output_width; - if (info->num_components == 1) { - info->iMCU_sample_width = srcinfo->min_DCT_v_scaled_size; - info->iMCU_sample_height = srcinfo->min_DCT_h_scaled_size; - } else { - info->iMCU_sample_width = - srcinfo->max_v_samp_factor * srcinfo->min_DCT_v_scaled_size; - info->iMCU_sample_height = - srcinfo->max_h_samp_factor * srcinfo->min_DCT_h_scaled_size; - } - break; - default: - info->output_width = srcinfo->output_width; - info->output_height = srcinfo->output_height; - if (info->num_components == 1) { - info->iMCU_sample_width = srcinfo->min_DCT_h_scaled_size; - info->iMCU_sample_height = srcinfo->min_DCT_v_scaled_size; - } else { - info->iMCU_sample_width = - srcinfo->max_h_samp_factor * srcinfo->min_DCT_h_scaled_size; - info->iMCU_sample_height = - srcinfo->max_v_samp_factor * srcinfo->min_DCT_v_scaled_size; - } - break; - } - - /* If cropping has been requested, compute the crop area's position and - * dimensions, ensuring that its upper left corner falls at an iMCU boundary. - */ - if (info->crop) { - /* Insert default values for unset crop parameters */ - if (info->crop_xoffset_set == JCROP_UNSET) - info->crop_xoffset = 0; /* default to +0 */ - if (info->crop_yoffset_set == JCROP_UNSET) - info->crop_yoffset = 0; /* default to +0 */ - if (info->crop_xoffset >= info->output_width || - info->crop_yoffset >= info->output_height) - ERREXIT(srcinfo, JERR_BAD_CROP_SPEC); - if (info->crop_width_set == JCROP_UNSET) - info->crop_width = info->output_width - info->crop_xoffset; - if (info->crop_height_set == JCROP_UNSET) - info->crop_height = info->output_height - info->crop_yoffset; - /* Ensure parameters are valid */ - if (info->crop_width <= 0 || info->crop_width > info->output_width || - info->crop_height <= 0 || info->crop_height > info->output_height || - info->crop_xoffset > info->output_width - info->crop_width || - info->crop_yoffset > info->output_height - info->crop_height) - ERREXIT(srcinfo, JERR_BAD_CROP_SPEC); - /* Convert negative crop offsets into regular offsets */ - if (info->crop_xoffset_set == JCROP_NEG) - xoffset = info->output_width - info->crop_width - info->crop_xoffset; - else - xoffset = info->crop_xoffset; - if (info->crop_yoffset_set == JCROP_NEG) - yoffset = info->output_height - info->crop_height - info->crop_yoffset; - else - yoffset = info->crop_yoffset; - /* Now adjust so that upper left corner falls at an iMCU boundary */ - if (info->crop_width_set == JCROP_FORCE) - info->output_width = info->crop_width; - else - info->output_width = - info->crop_width + (xoffset % info->iMCU_sample_width); - if (info->crop_height_set == JCROP_FORCE) - info->output_height = info->crop_height; - else - info->output_height = - info->crop_height + (yoffset % info->iMCU_sample_height); - /* Save x/y offsets measured in iMCUs */ - info->x_crop_offset = xoffset / info->iMCU_sample_width; - info->y_crop_offset = yoffset / info->iMCU_sample_height; - } else { - info->x_crop_offset = 0; - info->y_crop_offset = 0; - } - - /* Figure out whether we need workspace arrays, - * and if so whether they are transposed relative to the source. - */ - need_workspace = FALSE; - transpose_it = FALSE; - switch (info->transform) { - case JXFORM_NONE: - if (info->x_crop_offset != 0 || info->y_crop_offset != 0) - need_workspace = TRUE; - /* No workspace needed if neither cropping nor transforming */ - break; - case JXFORM_FLIP_H: - if (info->trim) - trim_right_edge(info, srcinfo->output_width); - if (info->y_crop_offset != 0) - need_workspace = TRUE; - /* do_flip_h_no_crop doesn't need a workspace array */ - break; - case JXFORM_FLIP_V: - if (info->trim) - trim_bottom_edge(info, srcinfo->output_height); - /* Need workspace arrays having same dimensions as source image. */ - need_workspace = TRUE; - break; - case JXFORM_TRANSPOSE: - /* transpose does NOT have to trim anything */ - /* Need workspace arrays having transposed dimensions. */ - need_workspace = TRUE; - transpose_it = TRUE; - break; - case JXFORM_TRANSVERSE: - if (info->trim) { - trim_right_edge(info, srcinfo->output_height); - trim_bottom_edge(info, srcinfo->output_width); - } - /* Need workspace arrays having transposed dimensions. */ - need_workspace = TRUE; - transpose_it = TRUE; - break; - case JXFORM_ROT_90: - if (info->trim) - trim_right_edge(info, srcinfo->output_height); - /* Need workspace arrays having transposed dimensions. */ - need_workspace = TRUE; - transpose_it = TRUE; - break; - case JXFORM_ROT_180: - if (info->trim) { - trim_right_edge(info, srcinfo->output_width); - trim_bottom_edge(info, srcinfo->output_height); - } - /* Need workspace arrays having same dimensions as source image. */ - need_workspace = TRUE; - break; - case JXFORM_ROT_270: - if (info->trim) - trim_bottom_edge(info, srcinfo->output_width); - /* Need workspace arrays having transposed dimensions. */ - need_workspace = TRUE; - transpose_it = TRUE; - break; - } - - /* Allocate workspace if needed. - * Note that we allocate arrays padded out to the next iMCU boundary, - * so that transform routines need not worry about missing edge blocks. - */ - if (need_workspace) { - coef_arrays = (jvirt_barray_ptr *) - (*srcinfo->mem->alloc_small) ((j_common_ptr) srcinfo, JPOOL_IMAGE, - SIZEOF(jvirt_barray_ptr) * info->num_components); - width_in_iMCUs = (JDIMENSION) - jdiv_round_up((long) info->output_width, - (long) info->iMCU_sample_width); - height_in_iMCUs = (JDIMENSION) - jdiv_round_up((long) info->output_height, - (long) info->iMCU_sample_height); - for (ci = 0; ci < info->num_components; ci++) { - compptr = srcinfo->comp_info + ci; - if (info->num_components == 1) { - /* we're going to force samp factors to 1x1 in this case */ - h_samp_factor = v_samp_factor = 1; - } else if (transpose_it) { - h_samp_factor = compptr->v_samp_factor; - v_samp_factor = compptr->h_samp_factor; - } else { - h_samp_factor = compptr->h_samp_factor; - v_samp_factor = compptr->v_samp_factor; - } - width_in_blocks = width_in_iMCUs * h_samp_factor; - height_in_blocks = height_in_iMCUs * v_samp_factor; - coef_arrays[ci] = (*srcinfo->mem->request_virt_barray) - ((j_common_ptr) srcinfo, JPOOL_IMAGE, FALSE, - width_in_blocks, height_in_blocks, (JDIMENSION) v_samp_factor); - } - info->workspace_coef_arrays = coef_arrays; - } else - info->workspace_coef_arrays = NULL; - - return TRUE; -} - - -/* Transpose destination image parameters */ - -LOCAL(void) -transpose_critical_parameters (j_compress_ptr dstinfo) -{ - int tblno, i, j, ci, itemp; - jpeg_component_info *compptr; - JQUANT_TBL *qtblptr; - JDIMENSION jtemp; - UINT16 qtemp; - - /* Transpose image dimensions */ - jtemp = dstinfo->image_width; - dstinfo->image_width = dstinfo->image_height; - dstinfo->image_height = jtemp; - itemp = dstinfo->min_DCT_h_scaled_size; - dstinfo->min_DCT_h_scaled_size = dstinfo->min_DCT_v_scaled_size; - dstinfo->min_DCT_v_scaled_size = itemp; - - /* Transpose sampling factors */ - for (ci = 0; ci < dstinfo->num_components; ci++) { - compptr = dstinfo->comp_info + ci; - itemp = compptr->h_samp_factor; - compptr->h_samp_factor = compptr->v_samp_factor; - compptr->v_samp_factor = itemp; - } - - /* Transpose quantization tables */ - for (tblno = 0; tblno < NUM_QUANT_TBLS; tblno++) { - qtblptr = dstinfo->quant_tbl_ptrs[tblno]; - if (qtblptr != NULL) { - for (i = 0; i < DCTSIZE; i++) { - for (j = 0; j < i; j++) { - qtemp = qtblptr->quantval[i*DCTSIZE+j]; - qtblptr->quantval[i*DCTSIZE+j] = qtblptr->quantval[j*DCTSIZE+i]; - qtblptr->quantval[j*DCTSIZE+i] = qtemp; - } - } - } - } -} - - -/* Adjust Exif image parameters. - * - * We try to adjust the Tags ExifImageWidth and ExifImageHeight if possible. - */ - -LOCAL(void) -adjust_exif_parameters (JOCTET FAR * data, unsigned int length, - JDIMENSION new_width, JDIMENSION new_height) -{ - boolean is_motorola; /* Flag for byte order */ - unsigned int number_of_tags, tagnum; - unsigned int firstoffset, offset; - JDIMENSION new_value; - - if (length < 12) return; /* Length of an IFD entry */ - - /* Discover byte order */ - if (GETJOCTET(data[0]) == 0x49 && GETJOCTET(data[1]) == 0x49) - is_motorola = FALSE; - else if (GETJOCTET(data[0]) == 0x4D && GETJOCTET(data[1]) == 0x4D) - is_motorola = TRUE; - else - return; - - /* Check Tag Mark */ - if (is_motorola) { - if (GETJOCTET(data[2]) != 0) return; - if (GETJOCTET(data[3]) != 0x2A) return; - } else { - if (GETJOCTET(data[3]) != 0) return; - if (GETJOCTET(data[2]) != 0x2A) return; - } - - /* Get first IFD offset (offset to IFD0) */ - if (is_motorola) { - if (GETJOCTET(data[4]) != 0) return; - if (GETJOCTET(data[5]) != 0) return; - firstoffset = GETJOCTET(data[6]); - firstoffset <<= 8; - firstoffset += GETJOCTET(data[7]); - } else { - if (GETJOCTET(data[7]) != 0) return; - if (GETJOCTET(data[6]) != 0) return; - firstoffset = GETJOCTET(data[5]); - firstoffset <<= 8; - firstoffset += GETJOCTET(data[4]); - } - if (firstoffset > length - 2) return; /* check end of data segment */ - - /* Get the number of directory entries contained in this IFD */ - if (is_motorola) { - number_of_tags = GETJOCTET(data[firstoffset]); - number_of_tags <<= 8; - number_of_tags += GETJOCTET(data[firstoffset+1]); - } else { - number_of_tags = GETJOCTET(data[firstoffset+1]); - number_of_tags <<= 8; - number_of_tags += GETJOCTET(data[firstoffset]); - } - if (number_of_tags == 0) return; - firstoffset += 2; - - /* Search for ExifSubIFD offset Tag in IFD0 */ - for (;;) { - if (firstoffset > length - 12) return; /* check end of data segment */ - /* Get Tag number */ - if (is_motorola) { - tagnum = GETJOCTET(data[firstoffset]); - tagnum <<= 8; - tagnum += GETJOCTET(data[firstoffset+1]); - } else { - tagnum = GETJOCTET(data[firstoffset+1]); - tagnum <<= 8; - tagnum += GETJOCTET(data[firstoffset]); - } - if (tagnum == 0x8769) break; /* found ExifSubIFD offset Tag */ - if (--number_of_tags == 0) return; - firstoffset += 12; - } - - /* Get the ExifSubIFD offset */ - if (is_motorola) { - if (GETJOCTET(data[firstoffset+8]) != 0) return; - if (GETJOCTET(data[firstoffset+9]) != 0) return; - offset = GETJOCTET(data[firstoffset+10]); - offset <<= 8; - offset += GETJOCTET(data[firstoffset+11]); - } else { - if (GETJOCTET(data[firstoffset+11]) != 0) return; - if (GETJOCTET(data[firstoffset+10]) != 0) return; - offset = GETJOCTET(data[firstoffset+9]); - offset <<= 8; - offset += GETJOCTET(data[firstoffset+8]); - } - if (offset > length - 2) return; /* check end of data segment */ - - /* Get the number of directory entries contained in this SubIFD */ - if (is_motorola) { - number_of_tags = GETJOCTET(data[offset]); - number_of_tags <<= 8; - number_of_tags += GETJOCTET(data[offset+1]); - } else { - number_of_tags = GETJOCTET(data[offset+1]); - number_of_tags <<= 8; - number_of_tags += GETJOCTET(data[offset]); - } - if (number_of_tags < 2) return; - offset += 2; - - /* Search for ExifImageWidth and ExifImageHeight Tags in this SubIFD */ - do { - if (offset > length - 12) return; /* check end of data segment */ - /* Get Tag number */ - if (is_motorola) { - tagnum = GETJOCTET(data[offset]); - tagnum <<= 8; - tagnum += GETJOCTET(data[offset+1]); - } else { - tagnum = GETJOCTET(data[offset+1]); - tagnum <<= 8; - tagnum += GETJOCTET(data[offset]); - } - if (tagnum == 0xA002 || tagnum == 0xA003) { - if (tagnum == 0xA002) - new_value = new_width; /* ExifImageWidth Tag */ - else - new_value = new_height; /* ExifImageHeight Tag */ - if (is_motorola) { - data[offset+2] = 0; /* Format = unsigned long (4 octets) */ - data[offset+3] = 4; - data[offset+4] = 0; /* Number Of Components = 1 */ - data[offset+5] = 0; - data[offset+6] = 0; - data[offset+7] = 1; - data[offset+8] = 0; - data[offset+9] = 0; - data[offset+10] = (JOCTET)((new_value >> 8) & 0xFF); - data[offset+11] = (JOCTET)(new_value & 0xFF); - } else { - data[offset+2] = 4; /* Format = unsigned long (4 octets) */ - data[offset+3] = 0; - data[offset+4] = 1; /* Number Of Components = 1 */ - data[offset+5] = 0; - data[offset+6] = 0; - data[offset+7] = 0; - data[offset+8] = (JOCTET)(new_value & 0xFF); - data[offset+9] = (JOCTET)((new_value >> 8) & 0xFF); - data[offset+10] = 0; - data[offset+11] = 0; - } - } - offset += 12; - } while (--number_of_tags); -} - - -/* Adjust output image parameters as needed. - * - * This must be called after jpeg_copy_critical_parameters() - * and before jpeg_write_coefficients(). - * - * The return value is the set of virtual coefficient arrays to be written - * (either the ones allocated by jtransform_request_workspace, or the - * original source data arrays). The caller will need to pass this value - * to jpeg_write_coefficients(). - */ - -GLOBAL(jvirt_barray_ptr *) -jtransform_adjust_parameters (j_decompress_ptr srcinfo, - j_compress_ptr dstinfo, - jvirt_barray_ptr *src_coef_arrays, - jpeg_transform_info *info) -{ - /* If force-to-grayscale is requested, adjust destination parameters */ - if (info->force_grayscale) { - /* First, ensure we have YCbCr or grayscale data, and that the source's - * Y channel is full resolution. (No reasonable person would make Y - * be less than full resolution, so actually coping with that case - * isn't worth extra code space. But we check it to avoid crashing.) - */ - if (((dstinfo->jpeg_color_space == JCS_YCbCr && - dstinfo->num_components == 3) || - (dstinfo->jpeg_color_space == JCS_GRAYSCALE && - dstinfo->num_components == 1)) && - srcinfo->comp_info[0].h_samp_factor == srcinfo->max_h_samp_factor && - srcinfo->comp_info[0].v_samp_factor == srcinfo->max_v_samp_factor) { - /* We use jpeg_set_colorspace to make sure subsidiary settings get fixed - * properly. Among other things, it sets the target h_samp_factor & - * v_samp_factor to 1, which typically won't match the source. - * We have to preserve the source's quantization table number, however. - */ - int sv_quant_tbl_no = dstinfo->comp_info[0].quant_tbl_no; - jpeg_set_colorspace(dstinfo, JCS_GRAYSCALE); - dstinfo->comp_info[0].quant_tbl_no = sv_quant_tbl_no; - } else { - /* Sorry, can't do it */ - ERREXIT(dstinfo, JERR_CONVERSION_NOTIMPL); - } - } else if (info->num_components == 1) { - /* For a single-component source, we force the destination sampling factors - * to 1x1, with or without force_grayscale. This is useful because some - * decoders choke on grayscale images with other sampling factors. - */ - dstinfo->comp_info[0].h_samp_factor = 1; - dstinfo->comp_info[0].v_samp_factor = 1; - } - - /* Correct the destination's image dimensions as necessary - * for rotate/flip, resize, and crop operations. - */ - dstinfo->jpeg_width = info->output_width; - dstinfo->jpeg_height = info->output_height; - - /* Transpose destination image parameters */ - switch (info->transform) { - case JXFORM_TRANSPOSE: - case JXFORM_TRANSVERSE: - case JXFORM_ROT_90: - case JXFORM_ROT_270: - transpose_critical_parameters(dstinfo); - break; - default: - break; - } - - /* Adjust Exif properties */ - if (srcinfo->marker_list != NULL && - srcinfo->marker_list->marker == JPEG_APP0+1 && - srcinfo->marker_list->data_length >= 6 && - GETJOCTET(srcinfo->marker_list->data[0]) == 0x45 && - GETJOCTET(srcinfo->marker_list->data[1]) == 0x78 && - GETJOCTET(srcinfo->marker_list->data[2]) == 0x69 && - GETJOCTET(srcinfo->marker_list->data[3]) == 0x66 && - GETJOCTET(srcinfo->marker_list->data[4]) == 0 && - GETJOCTET(srcinfo->marker_list->data[5]) == 0) { - /* Suppress output of JFIF marker */ - dstinfo->write_JFIF_header = FALSE; - /* Adjust Exif image parameters */ - if (dstinfo->jpeg_width != srcinfo->image_width || - dstinfo->jpeg_height != srcinfo->image_height) - /* Align data segment to start of TIFF structure for parsing */ - adjust_exif_parameters(srcinfo->marker_list->data + 6, - srcinfo->marker_list->data_length - 6, - dstinfo->jpeg_width, dstinfo->jpeg_height); - } - - /* Return the appropriate output data set */ - if (info->workspace_coef_arrays != NULL) - return info->workspace_coef_arrays; - return src_coef_arrays; -} - - -/* Execute the actual transformation, if any. - * - * This must be called *after* jpeg_write_coefficients, because it depends - * on jpeg_write_coefficients to have computed subsidiary values such as - * the per-component width and height fields in the destination object. - * - * Note that some transformations will modify the source data arrays! - */ - -GLOBAL(void) -jtransform_execute_transform (j_decompress_ptr srcinfo, - j_compress_ptr dstinfo, - jvirt_barray_ptr *src_coef_arrays, - jpeg_transform_info *info) -{ - jvirt_barray_ptr *dst_coef_arrays = info->workspace_coef_arrays; - - /* Note: conditions tested here should match those in switch statement - * in jtransform_request_workspace() - */ - switch (info->transform) { - case JXFORM_NONE: - if (info->x_crop_offset != 0 || info->y_crop_offset != 0) - do_crop(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset, - src_coef_arrays, dst_coef_arrays); - break; - case JXFORM_FLIP_H: - if (info->y_crop_offset != 0) - do_flip_h(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset, - src_coef_arrays, dst_coef_arrays); - else - do_flip_h_no_crop(srcinfo, dstinfo, info->x_crop_offset, - src_coef_arrays); - break; - case JXFORM_FLIP_V: - do_flip_v(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset, - src_coef_arrays, dst_coef_arrays); - break; - case JXFORM_TRANSPOSE: - do_transpose(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset, - src_coef_arrays, dst_coef_arrays); - break; - case JXFORM_TRANSVERSE: - do_transverse(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset, - src_coef_arrays, dst_coef_arrays); - break; - case JXFORM_ROT_90: - do_rot_90(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset, - src_coef_arrays, dst_coef_arrays); - break; - case JXFORM_ROT_180: - do_rot_180(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset, - src_coef_arrays, dst_coef_arrays); - break; - case JXFORM_ROT_270: - do_rot_270(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset, - src_coef_arrays, dst_coef_arrays); - break; - } -} - -/* jtransform_perfect_transform - * - * Determine whether lossless transformation is perfectly - * possible for a specified image and transformation. - * - * Inputs: - * image_width, image_height: source image dimensions. - * MCU_width, MCU_height: pixel dimensions of MCU. - * transform: transformation identifier. - * Parameter sources from initialized jpeg_struct - * (after reading source header): - * image_width = cinfo.image_width - * image_height = cinfo.image_height - * MCU_width = cinfo.max_h_samp_factor * cinfo.block_size - * MCU_height = cinfo.max_v_samp_factor * cinfo.block_size - * Result: - * TRUE = perfect transformation possible - * FALSE = perfect transformation not possible - * (may use custom action then) - */ - -GLOBAL(boolean) -jtransform_perfect_transform(JDIMENSION image_width, JDIMENSION image_height, - int MCU_width, int MCU_height, - JXFORM_CODE transform) -{ - boolean result = TRUE; /* initialize TRUE */ - - switch (transform) { - case JXFORM_FLIP_H: - case JXFORM_ROT_270: - if (image_width % (JDIMENSION) MCU_width) - result = FALSE; - break; - case JXFORM_FLIP_V: - case JXFORM_ROT_90: - if (image_height % (JDIMENSION) MCU_height) - result = FALSE; - break; - case JXFORM_TRANSVERSE: - case JXFORM_ROT_180: - if (image_width % (JDIMENSION) MCU_width) - result = FALSE; - if (image_height % (JDIMENSION) MCU_height) - result = FALSE; - break; - default: - break; - } - - return result; -} - -#endif /* TRANSFORMS_SUPPORTED */ - - -/* Setup decompression object to save desired markers in memory. - * This must be called before jpeg_read_header() to have the desired effect. - */ - -GLOBAL(void) -jcopy_markers_setup (j_decompress_ptr srcinfo, JCOPY_OPTION option) -{ -#ifdef SAVE_MARKERS_SUPPORTED - int m; - - /* Save comments except under NONE option */ - if (option != JCOPYOPT_NONE) { - jpeg_save_markers(srcinfo, JPEG_COM, 0xFFFF); - } - /* Save all types of APPn markers iff ALL option */ - if (option == JCOPYOPT_ALL) { - for (m = 0; m < 16; m++) - jpeg_save_markers(srcinfo, JPEG_APP0 + m, 0xFFFF); - } -#endif /* SAVE_MARKERS_SUPPORTED */ -} - -/* Copy markers saved in the given source object to the destination object. - * This should be called just after jpeg_start_compress() or - * jpeg_write_coefficients(). - * Note that those routines will have written the SOI, and also the - * JFIF APP0 or Adobe APP14 markers if selected. - */ - -GLOBAL(void) -jcopy_markers_execute (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, - JCOPY_OPTION option) -{ - jpeg_saved_marker_ptr marker; - - /* In the current implementation, we don't actually need to examine the - * option flag here; we just copy everything that got saved. - * But to avoid confusion, we do not output JFIF and Adobe APP14 markers - * if the encoder library already wrote one. - */ - for (marker = srcinfo->marker_list; marker != NULL; marker = marker->next) { - if (dstinfo->write_JFIF_header && - marker->marker == JPEG_APP0 && - marker->data_length >= 5 && - GETJOCTET(marker->data[0]) == 0x4A && - GETJOCTET(marker->data[1]) == 0x46 && - GETJOCTET(marker->data[2]) == 0x49 && - GETJOCTET(marker->data[3]) == 0x46 && - GETJOCTET(marker->data[4]) == 0) - continue; /* reject duplicate JFIF */ - if (dstinfo->write_Adobe_marker && - marker->marker == JPEG_APP0+14 && - marker->data_length >= 5 && - GETJOCTET(marker->data[0]) == 0x41 && - GETJOCTET(marker->data[1]) == 0x64 && - GETJOCTET(marker->data[2]) == 0x6F && - GETJOCTET(marker->data[3]) == 0x62 && - GETJOCTET(marker->data[4]) == 0x65) - continue; /* reject duplicate Adobe */ -#ifdef NEED_FAR_POINTERS - /* We could use jpeg_write_marker if the data weren't FAR... */ - { - unsigned int i; - jpeg_write_m_header(dstinfo, marker->marker, marker->data_length); - for (i = 0; i < marker->data_length; i++) - jpeg_write_m_byte(dstinfo, marker->data[i]); - } -#else - jpeg_write_marker(dstinfo, marker->marker, - marker->data, marker->data_length); -#endif - } -} diff --git a/jpeg/transupp.h b/jpeg/transupp.h deleted file mode 100755 index 9aa0af3..0000000 --- a/jpeg/transupp.h +++ /dev/null @@ -1,213 +0,0 @@ -/* - * transupp.h - * - * Copyright (C) 1997-2011, Thomas G. Lane, Guido Vollbeding. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains declarations for image transformation routines and - * other utility code used by the jpegtran sample application. These are - * NOT part of the core JPEG library. But we keep these routines separate - * from jpegtran.c to ease the task of maintaining jpegtran-like programs - * that have other user interfaces. - * - * NOTE: all the routines declared here have very specific requirements - * about when they are to be executed during the reading and writing of the - * source and destination files. See the comments in transupp.c, or see - * jpegtran.c for an example of correct usage. - */ - -/* If you happen not to want the image transform support, disable it here */ -#ifndef TRANSFORMS_SUPPORTED -#define TRANSFORMS_SUPPORTED 1 /* 0 disables transform code */ -#endif - -/* - * Although rotating and flipping data expressed as DCT coefficients is not - * hard, there is an asymmetry in the JPEG format specification for images - * whose dimensions aren't multiples of the iMCU size. The right and bottom - * image edges are padded out to the next iMCU boundary with junk data; but - * no padding is possible at the top and left edges. If we were to flip - * the whole image including the pad data, then pad garbage would become - * visible at the top and/or left, and real pixels would disappear into the - * pad margins --- perhaps permanently, since encoders & decoders may not - * bother to preserve DCT blocks that appear to be completely outside the - * nominal image area. So, we have to exclude any partial iMCUs from the - * basic transformation. - * - * Transpose is the only transformation that can handle partial iMCUs at the - * right and bottom edges completely cleanly. flip_h can flip partial iMCUs - * at the bottom, but leaves any partial iMCUs at the right edge untouched. - * Similarly flip_v leaves any partial iMCUs at the bottom edge untouched. - * The other transforms are defined as combinations of these basic transforms - * and process edge blocks in a way that preserves the equivalence. - * - * The "trim" option causes untransformable partial iMCUs to be dropped; - * this is not strictly lossless, but it usually gives the best-looking - * result for odd-size images. Note that when this option is active, - * the expected mathematical equivalences between the transforms may not hold. - * (For example, -rot 270 -trim trims only the bottom edge, but -rot 90 -trim - * followed by -rot 180 -trim trims both edges.) - * - * We also offer a lossless-crop option, which discards data outside a given - * image region but losslessly preserves what is inside. Like the rotate and - * flip transforms, lossless crop is restricted by the JPEG format: the upper - * left corner of the selected region must fall on an iMCU boundary. If this - * does not hold for the given crop parameters, we silently move the upper left - * corner up and/or left to make it so, simultaneously increasing the region - * dimensions to keep the lower right crop corner unchanged. (Thus, the - * output image covers at least the requested region, but may cover more.) - * The adjustment of the region dimensions may be optionally disabled. - * - * We also provide a lossless-resize option, which is kind of a lossless-crop - * operation in the DCT coefficient block domain - it discards higher-order - * coefficients and losslessly preserves lower-order coefficients of a - * sub-block. - * - * Rotate/flip transform, resize, and crop can be requested together in a - * single invocation. The crop is applied last --- that is, the crop region - * is specified in terms of the destination image after transform/resize. - * - * We also offer a "force to grayscale" option, which simply discards the - * chrominance channels of a YCbCr image. This is lossless in the sense that - * the luminance channel is preserved exactly. It's not the same kind of - * thing as the rotate/flip transformations, but it's convenient to handle it - * as part of this package, mainly because the transformation routines have to - * be aware of the option to know how many components to work on. - */ - - -/* Short forms of external names for systems with brain-damaged linkers. */ - -#ifdef NEED_SHORT_EXTERNAL_NAMES -#define jtransform_parse_crop_spec jTrParCrop -#define jtransform_request_workspace jTrRequest -#define jtransform_adjust_parameters jTrAdjust -#define jtransform_execute_transform jTrExec -#define jtransform_perfect_transform jTrPerfect -#define jcopy_markers_setup jCMrkSetup -#define jcopy_markers_execute jCMrkExec -#endif /* NEED_SHORT_EXTERNAL_NAMES */ - - -/* - * Codes for supported types of image transformations. - */ - -typedef enum { - JXFORM_NONE, /* no transformation */ - JXFORM_FLIP_H, /* horizontal flip */ - JXFORM_FLIP_V, /* vertical flip */ - JXFORM_TRANSPOSE, /* transpose across UL-to-LR axis */ - JXFORM_TRANSVERSE, /* transpose across UR-to-LL axis */ - JXFORM_ROT_90, /* 90-degree clockwise rotation */ - JXFORM_ROT_180, /* 180-degree rotation */ - JXFORM_ROT_270 /* 270-degree clockwise (or 90 ccw) */ -} JXFORM_CODE; - -/* - * Codes for crop parameters, which can individually be unspecified, - * positive or negative for xoffset or yoffset, - * positive or forced for width or height. - */ - -typedef enum { - JCROP_UNSET, - JCROP_POS, - JCROP_NEG, - JCROP_FORCE -} JCROP_CODE; - -/* - * Transform parameters struct. - * NB: application must not change any elements of this struct after - * calling jtransform_request_workspace. - */ - -typedef struct { - /* Options: set by caller */ - JXFORM_CODE transform; /* image transform operator */ - boolean perfect; /* if TRUE, fail if partial MCUs are requested */ - boolean trim; /* if TRUE, trim partial MCUs as needed */ - boolean force_grayscale; /* if TRUE, convert color image to grayscale */ - boolean crop; /* if TRUE, crop source image */ - - /* Crop parameters: application need not set these unless crop is TRUE. - * These can be filled in by jtransform_parse_crop_spec(). - */ - JDIMENSION crop_width; /* Width of selected region */ - JCROP_CODE crop_width_set; /* (forced disables adjustment) */ - JDIMENSION crop_height; /* Height of selected region */ - JCROP_CODE crop_height_set; /* (forced disables adjustment) */ - JDIMENSION crop_xoffset; /* X offset of selected region */ - JCROP_CODE crop_xoffset_set; /* (negative measures from right edge) */ - JDIMENSION crop_yoffset; /* Y offset of selected region */ - JCROP_CODE crop_yoffset_set; /* (negative measures from bottom edge) */ - - /* Internal workspace: caller should not touch these */ - int num_components; /* # of components in workspace */ - jvirt_barray_ptr * workspace_coef_arrays; /* workspace for transformations */ - JDIMENSION output_width; /* cropped destination dimensions */ - JDIMENSION output_height; - JDIMENSION x_crop_offset; /* destination crop offsets measured in iMCUs */ - JDIMENSION y_crop_offset; - int iMCU_sample_width; /* destination iMCU size */ - int iMCU_sample_height; -} jpeg_transform_info; - - -#if TRANSFORMS_SUPPORTED - -/* Parse a crop specification (written in X11 geometry style) */ -EXTERN(boolean) jtransform_parse_crop_spec - JPP((jpeg_transform_info *info, const char *spec)); -/* Request any required workspace */ -EXTERN(boolean) jtransform_request_workspace - JPP((j_decompress_ptr srcinfo, jpeg_transform_info *info)); -/* Adjust output image parameters */ -EXTERN(jvirt_barray_ptr *) jtransform_adjust_parameters - JPP((j_decompress_ptr srcinfo, j_compress_ptr dstinfo, - jvirt_barray_ptr *src_coef_arrays, - jpeg_transform_info *info)); -/* Execute the actual transformation, if any */ -EXTERN(void) jtransform_execute_transform - JPP((j_decompress_ptr srcinfo, j_compress_ptr dstinfo, - jvirt_barray_ptr *src_coef_arrays, - jpeg_transform_info *info)); -/* Determine whether lossless transformation is perfectly - * possible for a specified image and transformation. - */ -EXTERN(boolean) jtransform_perfect_transform - JPP((JDIMENSION image_width, JDIMENSION image_height, - int MCU_width, int MCU_height, - JXFORM_CODE transform)); - -/* jtransform_execute_transform used to be called - * jtransform_execute_transformation, but some compilers complain about - * routine names that long. This macro is here to avoid breaking any - * old source code that uses the original name... - */ -#define jtransform_execute_transformation jtransform_execute_transform - -#endif /* TRANSFORMS_SUPPORTED */ - - -/* - * Support for copying optional markers from source to destination file. - */ - -typedef enum { - JCOPYOPT_NONE, /* copy no optional markers */ - JCOPYOPT_COMMENTS, /* copy only comment (COM) markers */ - JCOPYOPT_ALL /* copy all optional markers */ -} JCOPY_OPTION; - -#define JCOPYOPT_DEFAULT JCOPYOPT_COMMENTS /* recommended default */ - -/* Setup decompression object to save desired markers in memory */ -EXTERN(void) jcopy_markers_setup - JPP((j_decompress_ptr srcinfo, JCOPY_OPTION option)); -/* Copy markers saved in the given source object to the destination object */ -EXTERN(void) jcopy_markers_execute - JPP((j_decompress_ptr srcinfo, j_compress_ptr dstinfo, - JCOPY_OPTION option)); diff --git a/jpeg/usage.txt b/jpeg/usage.txt deleted file mode 100755 index de9def7..0000000 --- a/jpeg/usage.txt +++ /dev/null @@ -1,637 +0,0 @@ -USAGE instructions for the Independent JPEG Group's JPEG software -================================================================= - -This file describes usage of the JPEG conversion programs cjpeg and djpeg, -as well as the utility programs jpegtran, rdjpgcom and wrjpgcom. (See -the other documentation files if you wish to use the JPEG library within -your own programs.) - -If you are on a Unix machine you may prefer to read the Unix-style manual -pages in files cjpeg.1, djpeg.1, jpegtran.1, rdjpgcom.1, wrjpgcom.1. - - -INTRODUCTION - -These programs implement JPEG image encoding, decoding, and transcoding. -JPEG (pronounced "jay-peg") is a standardized compression method for -full-color and gray-scale images. - - -GENERAL USAGE - -We provide two programs, cjpeg to compress an image file into JPEG format, -and djpeg to decompress a JPEG file back into a conventional image format. - -On Unix-like systems, you say: - cjpeg [switches] [imagefile] >jpegfile -or - djpeg [switches] [jpegfile] >imagefile -The programs read the specified input file, or standard input if none is -named. They always write to standard output (with trace/error messages to -standard error). These conventions are handy for piping images between -programs. - -On most non-Unix systems, you say: - cjpeg [switches] imagefile jpegfile -or - djpeg [switches] jpegfile imagefile -i.e., both the input and output files are named on the command line. This -style is a little more foolproof, and it loses no functionality if you don't -have pipes. (You can get this style on Unix too, if you prefer, by defining -TWO_FILE_COMMANDLINE when you compile the programs; see install.txt.) - -You can also say: - cjpeg [switches] -outfile jpegfile imagefile -or - djpeg [switches] -outfile imagefile jpegfile -This syntax works on all systems, so it is useful for scripts. - -The currently supported image file formats are: PPM (PBMPLUS color format), -PGM (PBMPLUS gray-scale format), BMP, Targa, and RLE (Utah Raster Toolkit -format). (RLE is supported only if the URT library is available.) -cjpeg recognizes the input image format automatically, with the exception -of some Targa-format files. You have to tell djpeg which format to generate. - -JPEG files are in the defacto standard JFIF file format. There are other, -less widely used JPEG-based file formats, but we don't support them. - -All switch names may be abbreviated; for example, -grayscale may be written --gray or -gr. Most of the "basic" switches can be abbreviated to as little as -one letter. Upper and lower case are equivalent (-BMP is the same as -bmp). -British spellings are also accepted (e.g., -greyscale), though for brevity -these are not mentioned below. - - -CJPEG DETAILS - -The basic command line switches for cjpeg are: - - -quality N[,...] Scale quantization tables to adjust image quality. - Quality is 0 (worst) to 100 (best); default is 75. - (See below for more info.) - - -grayscale Create monochrome JPEG file from color input. - Be sure to use this switch when compressing a grayscale - BMP file, because cjpeg isn't bright enough to notice - whether a BMP file uses only shades of gray. By - saying -grayscale, you'll get a smaller JPEG file that - takes less time to process. - - -rgb Create RGB JPEG file. - Using this switch suppresses the conversion from RGB - colorspace input to the default YCbCr JPEG colorspace. - Use this switch in combination with the -block N - switch (see below) for lossless JPEG coding. - - -optimize Perform optimization of entropy encoding parameters. - Without this, default encoding parameters are used. - -optimize usually makes the JPEG file a little smaller, - but cjpeg runs somewhat slower and needs much more - memory. Image quality and speed of decompression are - unaffected by -optimize. - - -progressive Create progressive JPEG file (see below). - - -scale M/N Scale the output image by a factor M/N. Currently - supported scale factors are M/N with all N from 1 to - 16, where M is the destination DCT size, which is 8 by - default (see -block N switch below). - - -targa Input file is Targa format. Targa files that contain - an "identification" field will not be automatically - recognized by cjpeg; for such files you must specify - -targa to make cjpeg treat the input as Targa format. - For most Targa files, you won't need this switch. - -The -quality switch lets you trade off compressed file size against quality of -the reconstructed image: the higher the quality setting, the larger the JPEG -file, and the closer the output image will be to the original input. Normally -you want to use the lowest quality setting (smallest file) that decompresses -into something visually indistinguishable from the original image. For this -purpose the quality setting should be between 50 and 95; the default of 75 is -often about right. If you see defects at -quality 75, then go up 5 or 10 -counts at a time until you are happy with the output image. (The optimal -setting will vary from one image to another.) - --quality 100 will generate a quantization table of all 1's, minimizing loss -in the quantization step (but there is still information loss in subsampling, -as well as roundoff error). This setting is mainly of interest for -experimental purposes. Quality values above about 95 are NOT recommended for -normal use; the compressed file size goes up dramatically for hardly any gain -in output image quality. - -In the other direction, quality values below 50 will produce very small files -of low image quality. Settings around 5 to 10 might be useful in preparing an -index of a large image library, for example. Try -quality 2 (or so) for some -amusing Cubist effects. (Note: quality values below about 25 generate 2-byte -quantization tables, which are considered optional in the JPEG standard. -cjpeg emits a warning message when you give such a quality value, because some -other JPEG programs may be unable to decode the resulting file. Use -baseline -if you need to ensure compatibility at low quality values.) - -The -quality option has been extended in IJG version 7 for support of separate -quality settings for luminance and chrominance (or in general, for every -provided quantization table slot). This feature is useful for high-quality -applications which cannot accept the damage of color data by coarse -subsampling settings. You can now easily reduce the color data amount more -smoothly with finer control without separate subsampling. The resulting file -is fully compliant with standard JPEG decoders. -Note that the -quality ratings refer to the quantization table slots, and that -the last value is replicated if there are more q-table slots than parameters. -The default q-table slots are 0 for luminance and 1 for chrominance with -default tables as given in the JPEG standard. This is compatible with the old -behaviour in case that only one parameter is given, which is then used for -both luminance and chrominance (slots 0 and 1). More or custom quantization -tables can be set with -qtables and assigned to components with -qslots -parameter (see the "wizard" switches below). -CAUTION: You must explicitly add -sample 1x1 for efficient separate color -quality selection, since the default value used by library is 2x2! - -The -progressive switch creates a "progressive JPEG" file. In this type of -JPEG file, the data is stored in multiple scans of increasing quality. If the -file is being transmitted over a slow communications link, the decoder can use -the first scan to display a low-quality image very quickly, and can then -improve the display with each subsequent scan. The final image is exactly -equivalent to a standard JPEG file of the same quality setting, and the total -file size is about the same --- often a little smaller. - -Switches for advanced users: - - -arithmetic Use arithmetic coding. CAUTION: arithmetic coded JPEG - is not yet widely implemented, so many decoders will - be unable to view an arithmetic coded JPEG file at - all. - - -block N Set DCT block size. All N from 1 to 16 are possible. - Default is 8 (baseline format). - Larger values produce higher compression, - smaller values produce higher quality - (exact DCT stage possible with 1 or 2; with the - default quality of 75 and default Luminance qtable - the DCT+Quantization stage is lossless for N=1). - CAUTION: An implementation of the JPEG SmartScale - extension is required for this feature. SmartScale - enabled JPEG is not yet widely implemented, so many - decoders will be unable to view a SmartScale extended - JPEG file at all. - - -dct int Use integer DCT method (default). - -dct fast Use fast integer DCT (less accurate). - -dct float Use floating-point DCT method. - The float method is very slightly more accurate than - the int method, but is much slower unless your machine - has very fast floating-point hardware. Also note that - results of the floating-point method may vary slightly - across machines, while the integer methods should give - the same results everywhere. The fast integer method - is much less accurate than the other two. - - -nosmooth Don't use high-quality downsampling. - - -restart N Emit a JPEG restart marker every N MCU rows, or every - N MCU blocks if "B" is attached to the number. - -restart 0 (the default) means no restart markers. - - -smooth N Smooth the input image to eliminate dithering noise. - N, ranging from 1 to 100, indicates the strength of - smoothing. 0 (the default) means no smoothing. - - -maxmemory N Set limit for amount of memory to use in processing - large images. Value is in thousands of bytes, or - millions of bytes if "M" is attached to the number. - For example, -max 4m selects 4000000 bytes. If more - space is needed, temporary files will be used. - - -verbose Enable debug printout. More -v's give more printout. - or -debug Also, version information is printed at startup. - -The -restart option inserts extra markers that allow a JPEG decoder to -resynchronize after a transmission error. Without restart markers, any damage -to a compressed file will usually ruin the image from the point of the error -to the end of the image; with restart markers, the damage is usually confined -to the portion of the image up to the next restart marker. Of course, the -restart markers occupy extra space. We recommend -restart 1 for images that -will be transmitted across unreliable networks such as Usenet. - -The -smooth option filters the input to eliminate fine-scale noise. This is -often useful when converting dithered images to JPEG: a moderate smoothing -factor of 10 to 50 gets rid of dithering patterns in the input file, resulting -in a smaller JPEG file and a better-looking image. Too large a smoothing -factor will visibly blur the image, however. - -Switches for wizards: - - -baseline Force baseline-compatible quantization tables to be - generated. This clamps quantization values to 8 bits - even at low quality settings. (This switch is poorly - named, since it does not ensure that the output is - actually baseline JPEG. For example, you can use - -baseline and -progressive together.) - - -qtables file Use the quantization tables given in the specified - text file. - - -qslots N[,...] Select which quantization table to use for each color - component. - - -sample HxV[,...] Set JPEG sampling factors for each color component. - - -scans file Use the scan script given in the specified text file. - -The "wizard" switches are intended for experimentation with JPEG. If you -don't know what you are doing, DON'T USE THEM. These switches are documented -further in the file wizard.txt. - - -DJPEG DETAILS - -The basic command line switches for djpeg are: - - -colors N Reduce image to at most N colors. This reduces the - or -quantize N number of colors used in the output image, so that it - can be displayed on a colormapped display or stored in - a colormapped file format. For example, if you have - an 8-bit display, you'd need to reduce to 256 or fewer - colors. (-colors is the recommended name, -quantize - is provided only for backwards compatibility.) - - -fast Select recommended processing options for fast, low - quality output. (The default options are chosen for - highest quality output.) Currently, this is equivalent - to "-dct fast -nosmooth -onepass -dither ordered". - - -grayscale Force gray-scale output even if JPEG file is color. - Useful for viewing on monochrome displays; also, - djpeg runs noticeably faster in this mode. - - -scale M/N Scale the output image by a factor M/N. Currently - supported scale factors are M/N with all M from 1 to - 16, where N is the source DCT size, which is 8 for - baseline JPEG. If the /N part is omitted, then M - specifies the DCT scaled size to be applied on the - given input. For baseline JPEG this is equivalent to - M/8 scaling, since the source DCT size for baseline - JPEG is 8. Scaling is handy if the image is larger - than your screen; also, djpeg runs much faster when - scaling down the output. - - -bmp Select BMP output format (Windows flavor). 8-bit - colormapped format is emitted if -colors or -grayscale - is specified, or if the JPEG file is gray-scale; - otherwise, 24-bit full-color format is emitted. - - -gif Select GIF output format. Since GIF does not support - more than 256 colors, -colors 256 is assumed (unless - you specify a smaller number of colors). If you - specify -fast, the default number of colors is 216. - - -os2 Select BMP output format (OS/2 1.x flavor). 8-bit - colormapped format is emitted if -colors or -grayscale - is specified, or if the JPEG file is gray-scale; - otherwise, 24-bit full-color format is emitted. - - -pnm Select PBMPLUS (PPM/PGM) output format (this is the - default format). PGM is emitted if the JPEG file is - gray-scale or if -grayscale is specified; otherwise - PPM is emitted. - - -rle Select RLE output format. (Requires URT library.) - - -targa Select Targa output format. Gray-scale format is - emitted if the JPEG file is gray-scale or if - -grayscale is specified; otherwise, colormapped format - is emitted if -colors is specified; otherwise, 24-bit - full-color format is emitted. - -Switches for advanced users: - - -dct int Use integer DCT method (default). - -dct fast Use fast integer DCT (less accurate). - -dct float Use floating-point DCT method. - The float method is very slightly more accurate than - the int method, but is much slower unless your machine - has very fast floating-point hardware. Also note that - results of the floating-point method may vary slightly - across machines, while the integer methods should give - the same results everywhere. The fast integer method - is much less accurate than the other two. - - -dither fs Use Floyd-Steinberg dithering in color quantization. - -dither ordered Use ordered dithering in color quantization. - -dither none Do not use dithering in color quantization. - By default, Floyd-Steinberg dithering is applied when - quantizing colors; this is slow but usually produces - the best results. Ordered dither is a compromise - between speed and quality; no dithering is fast but - usually looks awful. Note that these switches have - no effect unless color quantization is being done. - Ordered dither is only available in -onepass mode. - - -map FILE Quantize to the colors used in the specified image - file. This is useful for producing multiple files - with identical color maps, or for forcing a predefined - set of colors to be used. The FILE must be a GIF - or PPM file. This option overrides -colors and - -onepass. - - -nosmooth Don't use high-quality upsampling. - - -onepass Use one-pass instead of two-pass color quantization. - The one-pass method is faster and needs less memory, - but it produces a lower-quality image. -onepass is - ignored unless you also say -colors N. Also, - the one-pass method is always used for gray-scale - output (the two-pass method is no improvement then). - - -maxmemory N Set limit for amount of memory to use in processing - large images. Value is in thousands of bytes, or - millions of bytes if "M" is attached to the number. - For example, -max 4m selects 4000000 bytes. If more - space is needed, temporary files will be used. - - -verbose Enable debug printout. More -v's give more printout. - or -debug Also, version information is printed at startup. - - -HINTS FOR CJPEG - -Color GIF files are not the ideal input for JPEG; JPEG is really intended for -compressing full-color (24-bit) images. In particular, don't try to convert -cartoons, line drawings, and other images that have only a few distinct -colors. GIF works great on these, JPEG does not. If you want to convert a -GIF to JPEG, you should experiment with cjpeg's -quality and -smooth options -to get a satisfactory conversion. -smooth 10 or so is often helpful. - -Avoid running an image through a series of JPEG compression/decompression -cycles. Image quality loss will accumulate; after ten or so cycles the image -may be noticeably worse than it was after one cycle. It's best to use a -lossless format while manipulating an image, then convert to JPEG format when -you are ready to file the image away. - -The -optimize option to cjpeg is worth using when you are making a "final" -version for posting or archiving. It's also a win when you are using low -quality settings to make very small JPEG files; the percentage improvement -is often a lot more than it is on larger files. (At present, -optimize -mode is always selected when generating progressive JPEG files.) - -GIF input files are no longer supported, to avoid the Unisys LZW patent. -(Conversion of GIF files to JPEG is usually a bad idea anyway.) - - -HINTS FOR DJPEG - -To get a quick preview of an image, use the -grayscale and/or -scale switches. -"-grayscale -scale 1/8" is the fastest case. - -Several options are available that trade off image quality to gain speed. -"-fast" turns on the recommended settings. - -"-dct fast" and/or "-nosmooth" gain speed at a small sacrifice in quality. -When producing a color-quantized image, "-onepass -dither ordered" is fast but -much lower quality than the default behavior. "-dither none" may give -acceptable results in two-pass mode, but is seldom tolerable in one-pass mode. - -If you are fortunate enough to have very fast floating point hardware, -"-dct float" may be even faster than "-dct fast". But on most machines -"-dct float" is slower than "-dct int"; in this case it is not worth using, -because its theoretical accuracy advantage is too small to be significant -in practice. - -Two-pass color quantization requires a good deal of memory; on MS-DOS machines -it may run out of memory even with -maxmemory 0. In that case you can still -decompress, with some loss of image quality, by specifying -onepass for -one-pass quantization. - -To avoid the Unisys LZW patent, djpeg produces uncompressed GIF files. These -are larger than they should be, but are readable by standard GIF decoders. - - -HINTS FOR BOTH PROGRAMS - -If more space is needed than will fit in the available main memory (as -determined by -maxmemory), temporary files will be used. (MS-DOS versions -will try to get extended or expanded memory first.) The temporary files are -often rather large: in typical cases they occupy three bytes per pixel, for -example 3*800*600 = 1.44Mb for an 800x600 image. If you don't have enough -free disk space, leave out -progressive and -optimize (for cjpeg) or specify --onepass (for djpeg). - -On MS-DOS, the temporary files are created in the directory named by the TMP -or TEMP environment variable, or in the current directory if neither of those -exist. Amiga implementations put the temp files in the directory named by -JPEGTMP:, so be sure to assign JPEGTMP: to a disk partition with adequate free -space. - -The default memory usage limit (-maxmemory) is set when the software is -compiled. If you get an "insufficient memory" error, try specifying a smaller --maxmemory value, even -maxmemory 0 to use the absolute minimum space. You -may want to recompile with a smaller default value if this happens often. - -On machines that have "environment" variables, you can define the environment -variable JPEGMEM to set the default memory limit. The value is specified as -described for the -maxmemory switch. JPEGMEM overrides the default value -specified when the program was compiled, and itself is overridden by an -explicit -maxmemory switch. - -On MS-DOS machines, -maxmemory is the amount of main (conventional) memory to -use. (Extended or expanded memory is also used if available.) Most -DOS-specific versions of this software do their own memory space estimation -and do not need you to specify -maxmemory. - - -JPEGTRAN - -jpegtran performs various useful transformations of JPEG files. -It can translate the coded representation from one variant of JPEG to another, -for example from baseline JPEG to progressive JPEG or vice versa. It can also -perform some rearrangements of the image data, for example turning an image -from landscape to portrait format by rotation. - -jpegtran works by rearranging the compressed data (DCT coefficients), without -ever fully decoding the image. Therefore, its transformations are lossless: -there is no image degradation at all, which would not be true if you used -djpeg followed by cjpeg to accomplish the same conversion. But by the same -token, jpegtran cannot perform lossy operations such as changing the image -quality. - -jpegtran uses a command line syntax similar to cjpeg or djpeg. -On Unix-like systems, you say: - jpegtran [switches] [inputfile] >outputfile -On most non-Unix systems, you say: - jpegtran [switches] inputfile outputfile -where both the input and output files are JPEG files. - -To specify the coded JPEG representation used in the output file, -jpegtran accepts a subset of the switches recognized by cjpeg: - -optimize Perform optimization of entropy encoding parameters. - -progressive Create progressive JPEG file. - -arithmetic Use arithmetic coding. - -restart N Emit a JPEG restart marker every N MCU rows, or every - N MCU blocks if "B" is attached to the number. - -scans file Use the scan script given in the specified text file. -See the previous discussion of cjpeg for more details about these switches. -If you specify none of these switches, you get a plain baseline-JPEG output -file. The quality setting and so forth are determined by the input file. - -The image can be losslessly transformed by giving one of these switches: - -flip horizontal Mirror image horizontally (left-right). - -flip vertical Mirror image vertically (top-bottom). - -rotate 90 Rotate image 90 degrees clockwise. - -rotate 180 Rotate image 180 degrees. - -rotate 270 Rotate image 270 degrees clockwise (or 90 ccw). - -transpose Transpose image (across UL-to-LR axis). - -transverse Transverse transpose (across UR-to-LL axis). - -The transpose transformation has no restrictions regarding image dimensions. -The other transformations operate rather oddly if the image dimensions are not -a multiple of the iMCU size (usually 8 or 16 pixels), because they can only -transform complete blocks of DCT coefficient data in the desired way. - -jpegtran's default behavior when transforming an odd-size image is designed -to preserve exact reversibility and mathematical consistency of the -transformation set. As stated, transpose is able to flip the entire image -area. Horizontal mirroring leaves any partial iMCU column at the right edge -untouched, but is able to flip all rows of the image. Similarly, vertical -mirroring leaves any partial iMCU row at the bottom edge untouched, but is -able to flip all columns. The other transforms can be built up as sequences -of transpose and flip operations; for consistency, their actions on edge -pixels are defined to be the same as the end result of the corresponding -transpose-and-flip sequence. - -For practical use, you may prefer to discard any untransformable edge pixels -rather than having a strange-looking strip along the right and/or bottom edges -of a transformed image. To do this, add the -trim switch: - -trim Drop non-transformable edge blocks. -Obviously, a transformation with -trim is not reversible, so strictly speaking -jpegtran with this switch is not lossless. Also, the expected mathematical -equivalences between the transformations no longer hold. For example, -"-rot 270 -trim" trims only the bottom edge, but "-rot 90 -trim" followed by -"-rot 180 -trim" trims both edges. - -If you are only interested in perfect transformation, add the -perfect switch: - -perfect Fails with an error if the transformation is not - perfect. -For example you may want to do - jpegtran -rot 90 -perfect foo.jpg || djpeg foo.jpg | pnmflip -r90 | cjpeg -to do a perfect rotation if available or an approximated one if not. - -We also offer a lossless-crop option, which discards data outside a given -image region but losslessly preserves what is inside. Like the rotate and -flip transforms, lossless crop is restricted by the current JPEG format: the -upper left corner of the selected region must fall on an iMCU boundary. If -this does not hold for the given crop parameters, we silently move the upper -left corner up and/or left to make it so, simultaneously increasing the region -dimensions to keep the lower right crop corner unchanged. (Thus, the output -image covers at least the requested region, but may cover more.) - -The image can be losslessly cropped by giving the switch: - -crop WxH+X+Y Crop to a rectangular subarea of width W, height H - starting at point X,Y. - -Other not-strictly-lossless transformation switches are: - - -grayscale Force grayscale output. -This option discards the chrominance channels if the input image is YCbCr -(ie, a standard color JPEG), resulting in a grayscale JPEG file. The -luminance channel is preserved exactly, so this is a better method of reducing -to grayscale than decompression, conversion, and recompression. This switch -is particularly handy for fixing a monochrome picture that was mistakenly -encoded as a color JPEG. (In such a case, the space savings from getting rid -of the near-empty chroma channels won't be large; but the decoding time for -a grayscale JPEG is substantially less than that for a color JPEG.) - - -scale M/N Scale the output image by a factor M/N. -Currently supported scale factors are M/N with all M from 1 to 16, where N is -the source DCT size, which is 8 for baseline JPEG. If the /N part is omitted, -then M specifies the DCT scaled size to be applied on the given input. For -baseline JPEG this is equivalent to M/8 scaling, since the source DCT size -for baseline JPEG is 8. CAUTION: An implementation of the JPEG SmartScale -extension is required for this feature. SmartScale enabled JPEG is not yet -widely implemented, so many decoders will be unable to view a SmartScale -extended JPEG file at all. - -jpegtran also recognizes these switches that control what to do with "extra" -markers, such as comment blocks: - -copy none Copy no extra markers from source file. This setting - suppresses all comments and other excess baggage - present in the source file. - -copy comments Copy only comment markers. This setting copies - comments from the source file, but discards - any other inessential (for image display) data. - -copy all Copy all extra markers. This setting preserves - miscellaneous markers found in the source file, such - as JFIF thumbnails, Exif data, and Photoshop settings. - In some files these extra markers can be sizable. -The default behavior is -copy comments. (Note: in IJG releases v6 and v6a, -jpegtran always did the equivalent of -copy none.) - -Additional switches recognized by jpegtran are: - -outfile filename - -maxmemory N - -verbose - -debug -These work the same as in cjpeg or djpeg. - - -THE COMMENT UTILITIES - -The JPEG standard allows "comment" (COM) blocks to occur within a JPEG file. -Although the standard doesn't actually define what COM blocks are for, they -are widely used to hold user-supplied text strings. This lets you add -annotations, titles, index terms, etc to your JPEG files, and later retrieve -them as text. COM blocks do not interfere with the image stored in the JPEG -file. The maximum size of a COM block is 64K, but you can have as many of -them as you like in one JPEG file. - -We provide two utility programs to display COM block contents and add COM -blocks to a JPEG file. - -rdjpgcom searches a JPEG file and prints the contents of any COM blocks on -standard output. The command line syntax is - rdjpgcom [-raw] [-verbose] [inputfilename] -The switch "-raw" (or just "-r") causes rdjpgcom to also output non-printable -characters in comments, which are normally escaped for security reasons. -The switch "-verbose" (or just "-v") causes rdjpgcom to also display the JPEG -image dimensions. If you omit the input file name from the command line, -the JPEG file is read from standard input. (This may not work on some -operating systems, if binary data can't be read from stdin.) - -wrjpgcom adds a COM block, containing text you provide, to a JPEG file. -Ordinarily, the COM block is added after any existing COM blocks, but you -can delete the old COM blocks if you wish. wrjpgcom produces a new JPEG -file; it does not modify the input file. DO NOT try to overwrite the input -file by directing wrjpgcom's output back into it; on most systems this will -just destroy your file. - -The command line syntax for wrjpgcom is similar to cjpeg's. On Unix-like -systems, it is - wrjpgcom [switches] [inputfilename] -The output file is written to standard output. The input file comes from -the named file, or from standard input if no input file is named. - -On most non-Unix systems, the syntax is - wrjpgcom [switches] inputfilename outputfilename -where both input and output file names must be given explicitly. - -wrjpgcom understands three switches: - -replace Delete any existing COM blocks from the file. - -comment "Comment text" Supply new COM text on command line. - -cfile name Read text for new COM block from named file. -(Switch names can be abbreviated.) If you have only one line of comment text -to add, you can provide it on the command line with -comment. The comment -text must be surrounded with quotes so that it is treated as a single -argument. Longer comments can be read from a text file. - -If you give neither -comment nor -cfile, then wrjpgcom will read the comment -text from standard input. (In this case an input image file name MUST be -supplied, so that the source JPEG file comes from somewhere else.) You can -enter multiple lines, up to 64KB worth. Type an end-of-file indicator -(usually control-D or control-Z) to terminate the comment text entry. - -wrjpgcom will not add a COM block if the provided comment string is empty. -Therefore -replace -comment "" can be used to delete all COM blocks from a -file. - -These utility programs do not depend on the IJG JPEG library. In -particular, the source code for rdjpgcom is intended as an illustration of -the minimum amount of code required to parse a JPEG file header correctly. diff --git a/jpeg/wizard.txt b/jpeg/wizard.txt deleted file mode 100755 index 54170b2..0000000 --- a/jpeg/wizard.txt +++ /dev/null @@ -1,211 +0,0 @@ -Advanced usage instructions for the Independent JPEG Group's JPEG software -========================================================================== - -This file describes cjpeg's "switches for wizards". - -The "wizard" switches are intended for experimentation with JPEG by persons -who are reasonably knowledgeable about the JPEG standard. If you don't know -what you are doing, DON'T USE THESE SWITCHES. You'll likely produce files -with worse image quality and/or poorer compression than you'd get from the -default settings. Furthermore, these switches must be used with caution -when making files intended for general use, because not all JPEG decoders -will support unusual JPEG parameter settings. - - -Quantization Table Adjustment ------------------------------ - -Ordinarily, cjpeg starts with a default set of tables (the same ones given -as examples in the JPEG standard) and scales them up or down according to -the -quality setting. The details of the scaling algorithm can be found in -jcparam.c. At very low quality settings, some quantization table entries -can get scaled up to values exceeding 255. Although 2-byte quantization -values are supported by the IJG software, this feature is not in baseline -JPEG and is not supported by all implementations. If you need to ensure -wide compatibility of low-quality files, you can constrain the scaled -quantization values to no more than 255 by giving the -baseline switch. -Note that use of -baseline will result in poorer quality for the same file -size, since more bits than necessary are expended on higher AC coefficients. - -You can substitute a different set of quantization values by using the --qtables switch: - - -qtables file Use the quantization tables given in the named file. - -The specified file should be a text file containing decimal quantization -values. The file should contain one to four tables, each of 64 elements. -The tables are implicitly numbered 0,1,etc. in order of appearance. Table -entries appear in normal array order (NOT in the zigzag order in which they -will be stored in the JPEG file). - -Quantization table files are free format, in that arbitrary whitespace can -appear between numbers. Also, comments can be included: a comment starts -with '#' and extends to the end of the line. Here is an example file that -duplicates the default quantization tables: - - # Quantization tables given in JPEG spec, section K.1 - - # This is table 0 (the luminance table): - 16 11 10 16 24 40 51 61 - 12 12 14 19 26 58 60 55 - 14 13 16 24 40 57 69 56 - 14 17 22 29 51 87 80 62 - 18 22 37 56 68 109 103 77 - 24 35 55 64 81 104 113 92 - 49 64 78 87 103 121 120 101 - 72 92 95 98 112 100 103 99 - - # This is table 1 (the chrominance table): - 17 18 24 47 99 99 99 99 - 18 21 26 66 99 99 99 99 - 24 26 56 99 99 99 99 99 - 47 66 99 99 99 99 99 99 - 99 99 99 99 99 99 99 99 - 99 99 99 99 99 99 99 99 - 99 99 99 99 99 99 99 99 - 99 99 99 99 99 99 99 99 - -If the -qtables switch is used without -quality, then the specified tables -are used exactly as-is. If both -qtables and -quality are used, then the -tables taken from the file are scaled in the same fashion that the default -tables would be scaled for that quality setting. If -baseline appears, then -the quantization values are constrained to the range 1-255. - -By default, cjpeg will use quantization table 0 for luminance components and -table 1 for chrominance components. To override this choice, use the -qslots -switch: - - -qslots N[,...] Select which quantization table to use for - each color component. - -The -qslots switch specifies a quantization table number for each color -component, in the order in which the components appear in the JPEG SOF marker. -For example, to create a separate table for each of Y,Cb,Cr, you could -provide a -qtables file that defines three quantization tables and say -"-qslots 0,1,2". If -qslots gives fewer table numbers than there are color -components, then the last table number is repeated as necessary. - - -Sampling Factor Adjustment --------------------------- - -By default, cjpeg uses 2:1 horizontal and vertical downsampling when -compressing YCbCr data, and no downsampling for all other color spaces. -You can override this default with the -sample switch: - - -sample HxV[,...] Set JPEG sampling factors for each color - component. - -The -sample switch specifies the JPEG sampling factors for each color -component, in the order in which they appear in the JPEG SOF marker. -If you specify fewer HxV pairs than there are components, the remaining -components are set to 1x1 sampling. For example, the default YCbCr setting -is equivalent to "-sample 2x2,1x1,1x1", which can be abbreviated to -"-sample 2x2". - -There are still some JPEG decoders in existence that support only 2x1 -sampling (also called 4:2:2 sampling). Compatibility with such decoders can -be achieved by specifying "-sample 2x1". This is not recommended unless -really necessary, since it increases file size and encoding/decoding time -with very little quality gain. - - -Multiple Scan / Progression Control ------------------------------------ - -By default, cjpeg emits a single-scan sequential JPEG file. The --progressive switch generates a progressive JPEG file using a default series -of progression parameters. You can create multiple-scan sequential JPEG -files or progressive JPEG files with custom progression parameters by using -the -scans switch: - - -scans file Use the scan sequence given in the named file. - -The specified file should be a text file containing a "scan script". -The script specifies the contents and ordering of the scans to be emitted. -Each entry in the script defines one scan. A scan definition specifies -the components to be included in the scan, and for progressive JPEG it also -specifies the progression parameters Ss,Se,Ah,Al for the scan. Scan -definitions are separated by semicolons (';'). A semicolon after the last -scan definition is optional. - -Each scan definition contains one to four component indexes, optionally -followed by a colon (':') and the four progressive-JPEG parameters. The -component indexes denote which color component(s) are to be transmitted in -the scan. Components are numbered in the order in which they appear in the -JPEG SOF marker, with the first component being numbered 0. (Note that these -indexes are not the "component ID" codes assigned to the components, just -positional indexes.) - -The progression parameters for each scan are: - Ss Zigzag index of first coefficient included in scan - Se Zigzag index of last coefficient included in scan - Ah Zero for first scan of a coefficient, else Al of prior scan - Al Successive approximation low bit position for scan -If the progression parameters are omitted, the values 0,63,0,0 are used, -producing a sequential JPEG file. cjpeg automatically determines whether -the script represents a progressive or sequential file, by observing whether -Ss and Se values other than 0 and 63 appear. (The -progressive switch is -not needed to specify this; in fact, it is ignored when -scans appears.) -The scan script must meet the JPEG restrictions on progression sequences. -(cjpeg checks that the spec's requirements are obeyed.) - -Scan script files are free format, in that arbitrary whitespace can appear -between numbers and around punctuation. Also, comments can be included: a -comment starts with '#' and extends to the end of the line. For additional -legibility, commas or dashes can be placed between values. (Actually, any -single punctuation character other than ':' or ';' can be inserted.) For -example, the following two scan definitions are equivalent: - 0 1 2: 0 63 0 0; - 0,1,2 : 0-63, 0,0 ; - -Here is an example of a scan script that generates a partially interleaved -sequential JPEG file: - - 0; # Y only in first scan - 1 2; # Cb and Cr in second scan - -Here is an example of a progressive scan script using only spectral selection -(no successive approximation): - - # Interleaved DC scan for Y,Cb,Cr: - 0,1,2: 0-0, 0, 0 ; - # AC scans: - 0: 1-2, 0, 0 ; # First two Y AC coefficients - 0: 3-5, 0, 0 ; # Three more - 1: 1-63, 0, 0 ; # All AC coefficients for Cb - 2: 1-63, 0, 0 ; # All AC coefficients for Cr - 0: 6-9, 0, 0 ; # More Y coefficients - 0: 10-63, 0, 0 ; # Remaining Y coefficients - -Here is an example of a successive-approximation script. This is equivalent -to the default script used by "cjpeg -progressive" for YCbCr images: - - # Initial DC scan for Y,Cb,Cr (lowest bit not sent) - 0,1,2: 0-0, 0, 1 ; - # First AC scan: send first 5 Y AC coefficients, minus 2 lowest bits: - 0: 1-5, 0, 2 ; - # Send all Cr,Cb AC coefficients, minus lowest bit: - # (chroma data is usually too small to be worth subdividing further; - # but note we send Cr first since eye is least sensitive to Cb) - 2: 1-63, 0, 1 ; - 1: 1-63, 0, 1 ; - # Send remaining Y AC coefficients, minus 2 lowest bits: - 0: 6-63, 0, 2 ; - # Send next-to-lowest bit of all Y AC coefficients: - 0: 1-63, 2, 1 ; - # At this point we've sent all but the lowest bit of all coefficients. - # Send lowest bit of DC coefficients - 0,1,2: 0-0, 1, 0 ; - # Send lowest bit of AC coefficients - 2: 1-63, 1, 0 ; - 1: 1-63, 1, 0 ; - # Y AC lowest bit scan is last; it's usually the largest scan - 0: 1-63, 1, 0 ; - -It may be worth pointing out that this script is tuned for quality settings -of around 50 to 75. For lower quality settings, you'd probably want to use -a script with fewer stages of successive approximation (otherwise the -initial scans will be really bad). For higher quality settings, you might -want to use more stages of successive approximation (so that the initial -scans are not too large). diff --git a/jpeg/wrbmp.c b/jpeg/wrbmp.c deleted file mode 100755 index 3283b0f..0000000 --- a/jpeg/wrbmp.c +++ /dev/null @@ -1,442 +0,0 @@ -/* - * wrbmp.c - * - * Copyright (C) 1994-1996, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains routines to write output images in Microsoft "BMP" - * format (MS Windows 3.x and OS/2 1.x flavors). - * Either 8-bit colormapped or 24-bit full-color format can be written. - * No compression is supported. - * - * These routines may need modification for non-Unix environments or - * specialized applications. As they stand, they assume output to - * an ordinary stdio stream. - * - * This code contributed by James Arthur Boucher. - */ - -#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ - -#ifdef BMP_SUPPORTED - - -/* - * To support 12-bit JPEG data, we'd have to scale output down to 8 bits. - * This is not yet implemented. - */ - -#if BITS_IN_JSAMPLE != 8 - Sorry, this code only copes with 8-bit JSAMPLEs. /* deliberate syntax err */ -#endif - -/* - * Since BMP stores scanlines bottom-to-top, we have to invert the image - * from JPEG's top-to-bottom order. To do this, we save the outgoing data - * in a virtual array during put_pixel_row calls, then actually emit the - * BMP file during finish_output. The virtual array contains one JSAMPLE per - * pixel if the output is grayscale or colormapped, three if it is full color. - */ - -/* Private version of data destination object */ - -typedef struct { - struct djpeg_dest_struct pub; /* public fields */ - - boolean is_os2; /* saves the OS2 format request flag */ - - jvirt_sarray_ptr whole_image; /* needed to reverse row order */ - JDIMENSION data_width; /* JSAMPLEs per row */ - JDIMENSION row_width; /* physical width of one row in the BMP file */ - int pad_bytes; /* number of padding bytes needed per row */ - JDIMENSION cur_output_row; /* next row# to write to virtual array */ -} bmp_dest_struct; - -typedef bmp_dest_struct * bmp_dest_ptr; - - -/* Forward declarations */ -LOCAL(void) write_colormap - JPP((j_decompress_ptr cinfo, bmp_dest_ptr dest, - int map_colors, int map_entry_size)); - - -/* - * Write some pixel data. - * In this module rows_supplied will always be 1. - */ - -METHODDEF(void) -put_pixel_rows (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo, - JDIMENSION rows_supplied) -/* This version is for writing 24-bit pixels */ -{ - bmp_dest_ptr dest = (bmp_dest_ptr) dinfo; - JSAMPARRAY image_ptr; - register JSAMPROW inptr, outptr; - register JDIMENSION col; - int pad; - - /* Access next row in virtual array */ - image_ptr = (*cinfo->mem->access_virt_sarray) - ((j_common_ptr) cinfo, dest->whole_image, - dest->cur_output_row, (JDIMENSION) 1, TRUE); - dest->cur_output_row++; - - /* Transfer data. Note destination values must be in BGR order - * (even though Microsoft's own documents say the opposite). - */ - inptr = dest->pub.buffer[0]; - outptr = image_ptr[0]; - for (col = cinfo->output_width; col > 0; col--) { - outptr[2] = *inptr++; /* can omit GETJSAMPLE() safely */ - outptr[1] = *inptr++; - outptr[0] = *inptr++; - outptr += 3; - } - - /* Zero out the pad bytes. */ - pad = dest->pad_bytes; - while (--pad >= 0) - *outptr++ = 0; -} - -METHODDEF(void) -put_gray_rows (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo, - JDIMENSION rows_supplied) -/* This version is for grayscale OR quantized color output */ -{ - bmp_dest_ptr dest = (bmp_dest_ptr) dinfo; - JSAMPARRAY image_ptr; - register JSAMPROW inptr, outptr; - register JDIMENSION col; - int pad; - - /* Access next row in virtual array */ - image_ptr = (*cinfo->mem->access_virt_sarray) - ((j_common_ptr) cinfo, dest->whole_image, - dest->cur_output_row, (JDIMENSION) 1, TRUE); - dest->cur_output_row++; - - /* Transfer data. */ - inptr = dest->pub.buffer[0]; - outptr = image_ptr[0]; - for (col = cinfo->output_width; col > 0; col--) { - *outptr++ = *inptr++; /* can omit GETJSAMPLE() safely */ - } - - /* Zero out the pad bytes. */ - pad = dest->pad_bytes; - while (--pad >= 0) - *outptr++ = 0; -} - - -/* - * Startup: normally writes the file header. - * In this module we may as well postpone everything until finish_output. - */ - -METHODDEF(void) -start_output_bmp (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo) -{ - /* no work here */ -} - - -/* - * Finish up at the end of the file. - * - * Here is where we really output the BMP file. - * - * First, routines to write the Windows and OS/2 variants of the file header. - */ - -LOCAL(void) -write_bmp_header (j_decompress_ptr cinfo, bmp_dest_ptr dest) -/* Write a Windows-style BMP file header, including colormap if needed */ -{ - char bmpfileheader[14]; - char bmpinfoheader[40]; -#define PUT_2B(array,offset,value) \ - (array[offset] = (char) ((value) & 0xFF), \ - array[offset+1] = (char) (((value) >> 8) & 0xFF)) -#define PUT_4B(array,offset,value) \ - (array[offset] = (char) ((value) & 0xFF), \ - array[offset+1] = (char) (((value) >> 8) & 0xFF), \ - array[offset+2] = (char) (((value) >> 16) & 0xFF), \ - array[offset+3] = (char) (((value) >> 24) & 0xFF)) - INT32 headersize, bfSize; - int bits_per_pixel, cmap_entries; - - /* Compute colormap size and total file size */ - if (cinfo->out_color_space == JCS_RGB) { - if (cinfo->quantize_colors) { - /* Colormapped RGB */ - bits_per_pixel = 8; - cmap_entries = 256; - } else { - /* Unquantized, full color RGB */ - bits_per_pixel = 24; - cmap_entries = 0; - } - } else { - /* Grayscale output. We need to fake a 256-entry colormap. */ - bits_per_pixel = 8; - cmap_entries = 256; - } - /* File size */ - headersize = 14 + 40 + cmap_entries * 4; /* Header and colormap */ - bfSize = headersize + (INT32) dest->row_width * (INT32) cinfo->output_height; - - /* Set unused fields of header to 0 */ - MEMZERO(bmpfileheader, SIZEOF(bmpfileheader)); - MEMZERO(bmpinfoheader, SIZEOF(bmpinfoheader)); - - /* Fill the file header */ - bmpfileheader[0] = 0x42; /* first 2 bytes are ASCII 'B', 'M' */ - bmpfileheader[1] = 0x4D; - PUT_4B(bmpfileheader, 2, bfSize); /* bfSize */ - /* we leave bfReserved1 & bfReserved2 = 0 */ - PUT_4B(bmpfileheader, 10, headersize); /* bfOffBits */ - - /* Fill the info header (Microsoft calls this a BITMAPINFOHEADER) */ - PUT_2B(bmpinfoheader, 0, 40); /* biSize */ - PUT_4B(bmpinfoheader, 4, cinfo->output_width); /* biWidth */ - PUT_4B(bmpinfoheader, 8, cinfo->output_height); /* biHeight */ - PUT_2B(bmpinfoheader, 12, 1); /* biPlanes - must be 1 */ - PUT_2B(bmpinfoheader, 14, bits_per_pixel); /* biBitCount */ - /* we leave biCompression = 0, for none */ - /* we leave biSizeImage = 0; this is correct for uncompressed data */ - if (cinfo->density_unit == 2) { /* if have density in dots/cm, then */ - PUT_4B(bmpinfoheader, 24, (INT32) (cinfo->X_density*100)); /* XPels/M */ - PUT_4B(bmpinfoheader, 28, (INT32) (cinfo->Y_density*100)); /* XPels/M */ - } - PUT_2B(bmpinfoheader, 32, cmap_entries); /* biClrUsed */ - /* we leave biClrImportant = 0 */ - - if (JFWRITE(dest->pub.output_file, bmpfileheader, 14) != (size_t) 14) - ERREXIT(cinfo, JERR_FILE_WRITE); - if (JFWRITE(dest->pub.output_file, bmpinfoheader, 40) != (size_t) 40) - ERREXIT(cinfo, JERR_FILE_WRITE); - - if (cmap_entries > 0) - write_colormap(cinfo, dest, cmap_entries, 4); -} - - -LOCAL(void) -write_os2_header (j_decompress_ptr cinfo, bmp_dest_ptr dest) -/* Write an OS2-style BMP file header, including colormap if needed */ -{ - char bmpfileheader[14]; - char bmpcoreheader[12]; - INT32 headersize, bfSize; - int bits_per_pixel, cmap_entries; - - /* Compute colormap size and total file size */ - if (cinfo->out_color_space == JCS_RGB) { - if (cinfo->quantize_colors) { - /* Colormapped RGB */ - bits_per_pixel = 8; - cmap_entries = 256; - } else { - /* Unquantized, full color RGB */ - bits_per_pixel = 24; - cmap_entries = 0; - } - } else { - /* Grayscale output. We need to fake a 256-entry colormap. */ - bits_per_pixel = 8; - cmap_entries = 256; - } - /* File size */ - headersize = 14 + 12 + cmap_entries * 3; /* Header and colormap */ - bfSize = headersize + (INT32) dest->row_width * (INT32) cinfo->output_height; - - /* Set unused fields of header to 0 */ - MEMZERO(bmpfileheader, SIZEOF(bmpfileheader)); - MEMZERO(bmpcoreheader, SIZEOF(bmpcoreheader)); - - /* Fill the file header */ - bmpfileheader[0] = 0x42; /* first 2 bytes are ASCII 'B', 'M' */ - bmpfileheader[1] = 0x4D; - PUT_4B(bmpfileheader, 2, bfSize); /* bfSize */ - /* we leave bfReserved1 & bfReserved2 = 0 */ - PUT_4B(bmpfileheader, 10, headersize); /* bfOffBits */ - - /* Fill the info header (Microsoft calls this a BITMAPCOREHEADER) */ - PUT_2B(bmpcoreheader, 0, 12); /* bcSize */ - PUT_2B(bmpcoreheader, 4, cinfo->output_width); /* bcWidth */ - PUT_2B(bmpcoreheader, 6, cinfo->output_height); /* bcHeight */ - PUT_2B(bmpcoreheader, 8, 1); /* bcPlanes - must be 1 */ - PUT_2B(bmpcoreheader, 10, bits_per_pixel); /* bcBitCount */ - - if (JFWRITE(dest->pub.output_file, bmpfileheader, 14) != (size_t) 14) - ERREXIT(cinfo, JERR_FILE_WRITE); - if (JFWRITE(dest->pub.output_file, bmpcoreheader, 12) != (size_t) 12) - ERREXIT(cinfo, JERR_FILE_WRITE); - - if (cmap_entries > 0) - write_colormap(cinfo, dest, cmap_entries, 3); -} - - -/* - * Write the colormap. - * Windows uses BGR0 map entries; OS/2 uses BGR entries. - */ - -LOCAL(void) -write_colormap (j_decompress_ptr cinfo, bmp_dest_ptr dest, - int map_colors, int map_entry_size) -{ - JSAMPARRAY colormap = cinfo->colormap; - int num_colors = cinfo->actual_number_of_colors; - FILE * outfile = dest->pub.output_file; - int i; - - if (colormap != NULL) { - if (cinfo->out_color_components == 3) { - /* Normal case with RGB colormap */ - for (i = 0; i < num_colors; i++) { - putc(GETJSAMPLE(colormap[2][i]), outfile); - putc(GETJSAMPLE(colormap[1][i]), outfile); - putc(GETJSAMPLE(colormap[0][i]), outfile); - if (map_entry_size == 4) - putc(0, outfile); - } - } else { - /* Grayscale colormap (only happens with grayscale quantization) */ - for (i = 0; i < num_colors; i++) { - putc(GETJSAMPLE(colormap[0][i]), outfile); - putc(GETJSAMPLE(colormap[0][i]), outfile); - putc(GETJSAMPLE(colormap[0][i]), outfile); - if (map_entry_size == 4) - putc(0, outfile); - } - } - } else { - /* If no colormap, must be grayscale data. Generate a linear "map". */ - for (i = 0; i < 256; i++) { - putc(i, outfile); - putc(i, outfile); - putc(i, outfile); - if (map_entry_size == 4) - putc(0, outfile); - } - } - /* Pad colormap with zeros to ensure specified number of colormap entries */ - if (i > map_colors) - ERREXIT1(cinfo, JERR_TOO_MANY_COLORS, i); - for (; i < map_colors; i++) { - putc(0, outfile); - putc(0, outfile); - putc(0, outfile); - if (map_entry_size == 4) - putc(0, outfile); - } -} - - -METHODDEF(void) -finish_output_bmp (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo) -{ - bmp_dest_ptr dest = (bmp_dest_ptr) dinfo; - register FILE * outfile = dest->pub.output_file; - JSAMPARRAY image_ptr; - register JSAMPROW data_ptr; - JDIMENSION row; - register JDIMENSION col; - cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress; - - /* Write the header and colormap */ - if (dest->is_os2) - write_os2_header(cinfo, dest); - else - write_bmp_header(cinfo, dest); - - /* Write the file body from our virtual array */ - for (row = cinfo->output_height; row > 0; row--) { - if (progress != NULL) { - progress->pub.pass_counter = (long) (cinfo->output_height - row); - progress->pub.pass_limit = (long) cinfo->output_height; - (*progress->pub.progress_monitor) ((j_common_ptr) cinfo); - } - image_ptr = (*cinfo->mem->access_virt_sarray) - ((j_common_ptr) cinfo, dest->whole_image, row-1, (JDIMENSION) 1, FALSE); - data_ptr = image_ptr[0]; - for (col = dest->row_width; col > 0; col--) { - putc(GETJSAMPLE(*data_ptr), outfile); - data_ptr++; - } - } - if (progress != NULL) - progress->completed_extra_passes++; - - /* Make sure we wrote the output file OK */ - fflush(outfile); - if (ferror(outfile)) - ERREXIT(cinfo, JERR_FILE_WRITE); -} - - -/* - * The module selection routine for BMP format output. - */ - -GLOBAL(djpeg_dest_ptr) -jinit_write_bmp (j_decompress_ptr cinfo, boolean is_os2) -{ - bmp_dest_ptr dest; - JDIMENSION row_width; - - /* Create module interface object, fill in method pointers */ - dest = (bmp_dest_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(bmp_dest_struct)); - dest->pub.start_output = start_output_bmp; - dest->pub.finish_output = finish_output_bmp; - dest->is_os2 = is_os2; - - if (cinfo->out_color_space == JCS_GRAYSCALE) { - dest->pub.put_pixel_rows = put_gray_rows; - } else if (cinfo->out_color_space == JCS_RGB) { - if (cinfo->quantize_colors) - dest->pub.put_pixel_rows = put_gray_rows; - else - dest->pub.put_pixel_rows = put_pixel_rows; - } else { - ERREXIT(cinfo, JERR_BMP_COLORSPACE); - } - - /* Calculate output image dimensions so we can allocate space */ - jpeg_calc_output_dimensions(cinfo); - - /* Determine width of rows in the BMP file (padded to 4-byte boundary). */ - row_width = cinfo->output_width * cinfo->output_components; - dest->data_width = row_width; - while ((row_width & 3) != 0) row_width++; - dest->row_width = row_width; - dest->pad_bytes = (int) (row_width - dest->data_width); - - /* Allocate space for inversion array, prepare for write pass */ - dest->whole_image = (*cinfo->mem->request_virt_sarray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE, - row_width, cinfo->output_height, (JDIMENSION) 1); - dest->cur_output_row = 0; - if (cinfo->progress != NULL) { - cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress; - progress->total_extra_passes++; /* count file input as separate pass */ - } - - /* Create decompressor output buffer. */ - dest->pub.buffer = (*cinfo->mem->alloc_sarray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, row_width, (JDIMENSION) 1); - dest->pub.buffer_height = 1; - - return (djpeg_dest_ptr) dest; -} - -#endif /* BMP_SUPPORTED */ diff --git a/jpeg/wrgif.c b/jpeg/wrgif.c deleted file mode 100755 index 5fe8328..0000000 --- a/jpeg/wrgif.c +++ /dev/null @@ -1,399 +0,0 @@ -/* - * wrgif.c - * - * Copyright (C) 1991-1997, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains routines to write output images in GIF format. - * - ************************************************************************** - * NOTE: to avoid entanglements with Unisys' patent on LZW compression, * - * this code has been modified to output "uncompressed GIF" files. * - * There is no trace of the LZW algorithm in this file. * - ************************************************************************** - * - * These routines may need modification for non-Unix environments or - * specialized applications. As they stand, they assume output to - * an ordinary stdio stream. - */ - -/* - * This code is loosely based on ppmtogif from the PBMPLUS distribution - * of Feb. 1991. That file contains the following copyright notice: - * Based on GIFENCODE by David Rowley . - * Lempel-Ziv compression based on "compress" by Spencer W. Thomas et al. - * Copyright (C) 1989 by Jef Poskanzer. - * Permission to use, copy, modify, and distribute this software and its - * documentation for any purpose and without fee is hereby granted, provided - * that the above copyright notice appear in all copies and that both that - * copyright notice and this permission notice appear in supporting - * documentation. This software is provided "as is" without express or - * implied warranty. - * - * We are also required to state that - * "The Graphics Interchange Format(c) is the Copyright property of - * CompuServe Incorporated. GIF(sm) is a Service Mark property of - * CompuServe Incorporated." - */ - -#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ - -#ifdef GIF_SUPPORTED - - -/* Private version of data destination object */ - -typedef struct { - struct djpeg_dest_struct pub; /* public fields */ - - j_decompress_ptr cinfo; /* back link saves passing separate parm */ - - /* State for packing variable-width codes into a bitstream */ - int n_bits; /* current number of bits/code */ - int maxcode; /* maximum code, given n_bits */ - INT32 cur_accum; /* holds bits not yet output */ - int cur_bits; /* # of bits in cur_accum */ - - /* State for GIF code assignment */ - int ClearCode; /* clear code (doesn't change) */ - int EOFCode; /* EOF code (ditto) */ - int code_counter; /* counts output symbols */ - - /* GIF data packet construction buffer */ - int bytesinpkt; /* # of bytes in current packet */ - char packetbuf[256]; /* workspace for accumulating packet */ - -} gif_dest_struct; - -typedef gif_dest_struct * gif_dest_ptr; - -/* Largest value that will fit in N bits */ -#define MAXCODE(n_bits) ((1 << (n_bits)) - 1) - - -/* - * Routines to package finished data bytes into GIF data blocks. - * A data block consists of a count byte (1..255) and that many data bytes. - */ - -LOCAL(void) -flush_packet (gif_dest_ptr dinfo) -/* flush any accumulated data */ -{ - if (dinfo->bytesinpkt > 0) { /* never write zero-length packet */ - dinfo->packetbuf[0] = (char) dinfo->bytesinpkt++; - if (JFWRITE(dinfo->pub.output_file, dinfo->packetbuf, dinfo->bytesinpkt) - != (size_t) dinfo->bytesinpkt) - ERREXIT(dinfo->cinfo, JERR_FILE_WRITE); - dinfo->bytesinpkt = 0; - } -} - - -/* Add a character to current packet; flush to disk if necessary */ -#define CHAR_OUT(dinfo,c) \ - { (dinfo)->packetbuf[++(dinfo)->bytesinpkt] = (char) (c); \ - if ((dinfo)->bytesinpkt >= 255) \ - flush_packet(dinfo); \ - } - - -/* Routine to convert variable-width codes into a byte stream */ - -LOCAL(void) -output (gif_dest_ptr dinfo, int code) -/* Emit a code of n_bits bits */ -/* Uses cur_accum and cur_bits to reblock into 8-bit bytes */ -{ - dinfo->cur_accum |= ((INT32) code) << dinfo->cur_bits; - dinfo->cur_bits += dinfo->n_bits; - - while (dinfo->cur_bits >= 8) { - CHAR_OUT(dinfo, dinfo->cur_accum & 0xFF); - dinfo->cur_accum >>= 8; - dinfo->cur_bits -= 8; - } -} - - -/* The pseudo-compression algorithm. - * - * In this module we simply output each pixel value as a separate symbol; - * thus, no compression occurs. In fact, there is expansion of one bit per - * pixel, because we use a symbol width one bit wider than the pixel width. - * - * GIF ordinarily uses variable-width symbols, and the decoder will expect - * to ratchet up the symbol width after a fixed number of symbols. - * To simplify the logic and keep the expansion penalty down, we emit a - * GIF Clear code to reset the decoder just before the width would ratchet up. - * Thus, all the symbols in the output file will have the same bit width. - * Note that emitting the Clear codes at the right times is a mere matter of - * counting output symbols and is in no way dependent on the LZW patent. - * - * With a small basic pixel width (low color count), Clear codes will be - * needed very frequently, causing the file to expand even more. So this - * simplistic approach wouldn't work too well on bilevel images, for example. - * But for output of JPEG conversions the pixel width will usually be 8 bits - * (129 to 256 colors), so the overhead added by Clear symbols is only about - * one symbol in every 256. - */ - -LOCAL(void) -compress_init (gif_dest_ptr dinfo, int i_bits) -/* Initialize pseudo-compressor */ -{ - /* init all the state variables */ - dinfo->n_bits = i_bits; - dinfo->maxcode = MAXCODE(dinfo->n_bits); - dinfo->ClearCode = (1 << (i_bits - 1)); - dinfo->EOFCode = dinfo->ClearCode + 1; - dinfo->code_counter = dinfo->ClearCode + 2; - /* init output buffering vars */ - dinfo->bytesinpkt = 0; - dinfo->cur_accum = 0; - dinfo->cur_bits = 0; - /* GIF specifies an initial Clear code */ - output(dinfo, dinfo->ClearCode); -} - - -LOCAL(void) -compress_pixel (gif_dest_ptr dinfo, int c) -/* Accept and "compress" one pixel value. - * The given value must be less than n_bits wide. - */ -{ - /* Output the given pixel value as a symbol. */ - output(dinfo, c); - /* Issue Clear codes often enough to keep the reader from ratcheting up - * its symbol size. - */ - if (dinfo->code_counter < dinfo->maxcode) { - dinfo->code_counter++; - } else { - output(dinfo, dinfo->ClearCode); - dinfo->code_counter = dinfo->ClearCode + 2; /* reset the counter */ - } -} - - -LOCAL(void) -compress_term (gif_dest_ptr dinfo) -/* Clean up at end */ -{ - /* Send an EOF code */ - output(dinfo, dinfo->EOFCode); - /* Flush the bit-packing buffer */ - if (dinfo->cur_bits > 0) { - CHAR_OUT(dinfo, dinfo->cur_accum & 0xFF); - } - /* Flush the packet buffer */ - flush_packet(dinfo); -} - - -/* GIF header construction */ - - -LOCAL(void) -put_word (gif_dest_ptr dinfo, unsigned int w) -/* Emit a 16-bit word, LSB first */ -{ - putc(w & 0xFF, dinfo->pub.output_file); - putc((w >> 8) & 0xFF, dinfo->pub.output_file); -} - - -LOCAL(void) -put_3bytes (gif_dest_ptr dinfo, int val) -/* Emit 3 copies of same byte value --- handy subr for colormap construction */ -{ - putc(val, dinfo->pub.output_file); - putc(val, dinfo->pub.output_file); - putc(val, dinfo->pub.output_file); -} - - -LOCAL(void) -emit_header (gif_dest_ptr dinfo, int num_colors, JSAMPARRAY colormap) -/* Output the GIF file header, including color map */ -/* If colormap==NULL, synthesize a gray-scale colormap */ -{ - int BitsPerPixel, ColorMapSize, InitCodeSize, FlagByte; - int cshift = dinfo->cinfo->data_precision - 8; - int i; - - if (num_colors > 256) - ERREXIT1(dinfo->cinfo, JERR_TOO_MANY_COLORS, num_colors); - /* Compute bits/pixel and related values */ - BitsPerPixel = 1; - while (num_colors > (1 << BitsPerPixel)) - BitsPerPixel++; - ColorMapSize = 1 << BitsPerPixel; - if (BitsPerPixel <= 1) - InitCodeSize = 2; - else - InitCodeSize = BitsPerPixel; - /* - * Write the GIF header. - * Note that we generate a plain GIF87 header for maximum compatibility. - */ - putc('G', dinfo->pub.output_file); - putc('I', dinfo->pub.output_file); - putc('F', dinfo->pub.output_file); - putc('8', dinfo->pub.output_file); - putc('7', dinfo->pub.output_file); - putc('a', dinfo->pub.output_file); - /* Write the Logical Screen Descriptor */ - put_word(dinfo, (unsigned int) dinfo->cinfo->output_width); - put_word(dinfo, (unsigned int) dinfo->cinfo->output_height); - FlagByte = 0x80; /* Yes, there is a global color table */ - FlagByte |= (BitsPerPixel-1) << 4; /* color resolution */ - FlagByte |= (BitsPerPixel-1); /* size of global color table */ - putc(FlagByte, dinfo->pub.output_file); - putc(0, dinfo->pub.output_file); /* Background color index */ - putc(0, dinfo->pub.output_file); /* Reserved (aspect ratio in GIF89) */ - /* Write the Global Color Map */ - /* If the color map is more than 8 bits precision, */ - /* we reduce it to 8 bits by shifting */ - for (i=0; i < ColorMapSize; i++) { - if (i < num_colors) { - if (colormap != NULL) { - if (dinfo->cinfo->out_color_space == JCS_RGB) { - /* Normal case: RGB color map */ - putc(GETJSAMPLE(colormap[0][i]) >> cshift, dinfo->pub.output_file); - putc(GETJSAMPLE(colormap[1][i]) >> cshift, dinfo->pub.output_file); - putc(GETJSAMPLE(colormap[2][i]) >> cshift, dinfo->pub.output_file); - } else { - /* Grayscale "color map": possible if quantizing grayscale image */ - put_3bytes(dinfo, GETJSAMPLE(colormap[0][i]) >> cshift); - } - } else { - /* Create a gray-scale map of num_colors values, range 0..255 */ - put_3bytes(dinfo, (i * 255 + (num_colors-1)/2) / (num_colors-1)); - } - } else { - /* fill out the map to a power of 2 */ - put_3bytes(dinfo, 0); - } - } - /* Write image separator and Image Descriptor */ - putc(',', dinfo->pub.output_file); /* separator */ - put_word(dinfo, 0); /* left/top offset */ - put_word(dinfo, 0); - put_word(dinfo, (unsigned int) dinfo->cinfo->output_width); /* image size */ - put_word(dinfo, (unsigned int) dinfo->cinfo->output_height); - /* flag byte: not interlaced, no local color map */ - putc(0x00, dinfo->pub.output_file); - /* Write Initial Code Size byte */ - putc(InitCodeSize, dinfo->pub.output_file); - - /* Initialize for "compression" of image data */ - compress_init(dinfo, InitCodeSize+1); -} - - -/* - * Startup: write the file header. - */ - -METHODDEF(void) -start_output_gif (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo) -{ - gif_dest_ptr dest = (gif_dest_ptr) dinfo; - - if (cinfo->quantize_colors) - emit_header(dest, cinfo->actual_number_of_colors, cinfo->colormap); - else - emit_header(dest, 256, (JSAMPARRAY) NULL); -} - - -/* - * Write some pixel data. - * In this module rows_supplied will always be 1. - */ - -METHODDEF(void) -put_pixel_rows (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo, - JDIMENSION rows_supplied) -{ - gif_dest_ptr dest = (gif_dest_ptr) dinfo; - register JSAMPROW ptr; - register JDIMENSION col; - - ptr = dest->pub.buffer[0]; - for (col = cinfo->output_width; col > 0; col--) { - compress_pixel(dest, GETJSAMPLE(*ptr++)); - } -} - - -/* - * Finish up at the end of the file. - */ - -METHODDEF(void) -finish_output_gif (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo) -{ - gif_dest_ptr dest = (gif_dest_ptr) dinfo; - - /* Flush "compression" mechanism */ - compress_term(dest); - /* Write a zero-length data block to end the series */ - putc(0, dest->pub.output_file); - /* Write the GIF terminator mark */ - putc(';', dest->pub.output_file); - /* Make sure we wrote the output file OK */ - fflush(dest->pub.output_file); - if (ferror(dest->pub.output_file)) - ERREXIT(cinfo, JERR_FILE_WRITE); -} - - -/* - * The module selection routine for GIF format output. - */ - -GLOBAL(djpeg_dest_ptr) -jinit_write_gif (j_decompress_ptr cinfo) -{ - gif_dest_ptr dest; - - /* Create module interface object, fill in method pointers */ - dest = (gif_dest_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(gif_dest_struct)); - dest->cinfo = cinfo; /* make back link for subroutines */ - dest->pub.start_output = start_output_gif; - dest->pub.put_pixel_rows = put_pixel_rows; - dest->pub.finish_output = finish_output_gif; - - if (cinfo->out_color_space != JCS_GRAYSCALE && - cinfo->out_color_space != JCS_RGB) - ERREXIT(cinfo, JERR_GIF_COLORSPACE); - - /* Force quantization if color or if > 8 bits input */ - if (cinfo->out_color_space != JCS_GRAYSCALE || cinfo->data_precision > 8) { - /* Force quantization to at most 256 colors */ - cinfo->quantize_colors = TRUE; - if (cinfo->desired_number_of_colors > 256) - cinfo->desired_number_of_colors = 256; - } - - /* Calculate output image dimensions so we can allocate space */ - jpeg_calc_output_dimensions(cinfo); - - if (cinfo->output_components != 1) /* safety check: just one component? */ - ERREXIT(cinfo, JERR_GIF_BUG); - - /* Create decompressor output buffer. */ - dest->pub.buffer = (*cinfo->mem->alloc_sarray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, cinfo->output_width, (JDIMENSION) 1); - dest->pub.buffer_height = 1; - - return (djpeg_dest_ptr) dest; -} - -#endif /* GIF_SUPPORTED */ diff --git a/jpeg/wrjpgcom.1 b/jpeg/wrjpgcom.1 deleted file mode 100755 index d419a99..0000000 --- a/jpeg/wrjpgcom.1 +++ /dev/null @@ -1,103 +0,0 @@ -.TH WRJPGCOM 1 "15 June 1995" -.SH NAME -wrjpgcom \- insert text comments into a JPEG file -.SH SYNOPSIS -.B wrjpgcom -[ -.B \-replace -] -[ -.BI \-comment " text" -] -[ -.BI \-cfile " name" -] -[ -.I filename -] -.LP -.SH DESCRIPTION -.LP -.B wrjpgcom -reads the named JPEG/JFIF file, or the standard input if no file is named, -and generates a new JPEG/JFIF file on standard output. A comment block is -added to the file. -.PP -The JPEG standard allows "comment" (COM) blocks to occur within a JPEG file. -Although the standard doesn't actually define what COM blocks are for, they -are widely used to hold user-supplied text strings. This lets you add -annotations, titles, index terms, etc to your JPEG files, and later retrieve -them as text. COM blocks do not interfere with the image stored in the JPEG -file. The maximum size of a COM block is 64K, but you can have as many of -them as you like in one JPEG file. -.PP -.B wrjpgcom -adds a COM block, containing text you provide, to a JPEG file. -Ordinarily, the COM block is added after any existing COM blocks; but you -can delete the old COM blocks if you wish. -.SH OPTIONS -Switch names may be abbreviated, and are not case sensitive. -.TP -.B \-replace -Delete any existing COM blocks from the file. -.TP -.BI \-comment " text" -Supply text for new COM block on command line. -.TP -.BI \-cfile " name" -Read text for new COM block from named file. -.PP -If you have only one line of comment text to add, you can provide it on the -command line with -.BR \-comment . -The comment text must be surrounded with quotes so that it is treated as a -single argument. Longer comments can be read from a text file. -.PP -If you give neither -.B \-comment -nor -.BR \-cfile , -then -.B wrjpgcom -will read the comment text from standard input. (In this case an input image -file name MUST be supplied, so that the source JPEG file comes from somewhere -else.) You can enter multiple lines, up to 64KB worth. Type an end-of-file -indicator (usually control-D) to terminate the comment text entry. -.PP -.B wrjpgcom -will not add a COM block if the provided comment string is empty. Therefore -\fB\-replace \-comment ""\fR can be used to delete all COM blocks from a file. -.SH EXAMPLES -.LP -Add a short comment to in.jpg, producing out.jpg: -.IP -.B wrjpgcom \-c -\fI"View of my back yard" in.jpg -.B > -.I out.jpg -.PP -Attach a long comment previously stored in comment.txt: -.IP -.B wrjpgcom -.I in.jpg -.B < -.I comment.txt -.B > -.I out.jpg -.PP -or equivalently -.IP -.B wrjpgcom -.B -cfile -.I comment.txt -.B < -.I in.jpg -.B > -.I out.jpg -.SH SEE ALSO -.BR cjpeg (1), -.BR djpeg (1), -.BR jpegtran (1), -.BR rdjpgcom (1) -.SH AUTHOR -Independent JPEG Group diff --git a/jpeg/wrjpgcom.c b/jpeg/wrjpgcom.c deleted file mode 100755 index 8c04b05..0000000 --- a/jpeg/wrjpgcom.c +++ /dev/null @@ -1,583 +0,0 @@ -/* - * wrjpgcom.c - * - * Copyright (C) 1994-1997, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains a very simple stand-alone application that inserts - * user-supplied text as a COM (comment) marker in a JFIF file. - * This may be useful as an example of the minimum logic needed to parse - * JPEG markers. - */ - -#define JPEG_CJPEG_DJPEG /* to get the command-line config symbols */ -#include "jinclude.h" /* get auto-config symbols, */ - -#ifndef HAVE_STDLIB_H /* should declare malloc() */ -extern void * malloc (); -#endif -#include /* to declare isupper(), tolower() */ -#ifdef USE_SETMODE -#include /* to declare setmode()'s parameter macros */ -/* If you have setmode() but not , just delete this line: */ -#include /* to declare setmode() */ -#endif - -#ifdef USE_CCOMMAND /* command-line reader for Macintosh */ -#ifdef __MWERKS__ -#include /* Metrowerks needs this */ -#include /* ... and this */ -#endif -#ifdef THINK_C -#include /* Think declares it here */ -#endif -#endif - -#ifdef DONT_USE_B_MODE /* define mode parameters for fopen() */ -#define READ_BINARY "r" -#define WRITE_BINARY "w" -#else -#ifdef VMS /* VMS is very nonstandard */ -#define READ_BINARY "rb", "ctx=stm" -#define WRITE_BINARY "wb", "ctx=stm" -#else /* standard ANSI-compliant case */ -#define READ_BINARY "rb" -#define WRITE_BINARY "wb" -#endif -#endif - -#ifndef EXIT_FAILURE /* define exit() codes if not provided */ -#define EXIT_FAILURE 1 -#endif -#ifndef EXIT_SUCCESS -#ifdef VMS -#define EXIT_SUCCESS 1 /* VMS is very nonstandard */ -#else -#define EXIT_SUCCESS 0 -#endif -#endif - -/* Reduce this value if your malloc() can't allocate blocks up to 64K. - * On DOS, compiling in large model is usually a better solution. - */ - -#ifndef MAX_COM_LENGTH -#define MAX_COM_LENGTH 65000L /* must be <= 65533 in any case */ -#endif - - -/* - * These macros are used to read the input file and write the output file. - * To reuse this code in another application, you might need to change these. - */ - -static FILE * infile; /* input JPEG file */ - -/* Return next input byte, or EOF if no more */ -#define NEXTBYTE() getc(infile) - -static FILE * outfile; /* output JPEG file */ - -/* Emit an output byte */ -#define PUTBYTE(x) putc((x), outfile) - - -/* Error exit handler */ -#define ERREXIT(msg) (fprintf(stderr, "%s\n", msg), exit(EXIT_FAILURE)) - - -/* Read one byte, testing for EOF */ -static int -read_1_byte (void) -{ - int c; - - c = NEXTBYTE(); - if (c == EOF) - ERREXIT("Premature EOF in JPEG file"); - return c; -} - -/* Read 2 bytes, convert to unsigned int */ -/* All 2-byte quantities in JPEG markers are MSB first */ -static unsigned int -read_2_bytes (void) -{ - int c1, c2; - - c1 = NEXTBYTE(); - if (c1 == EOF) - ERREXIT("Premature EOF in JPEG file"); - c2 = NEXTBYTE(); - if (c2 == EOF) - ERREXIT("Premature EOF in JPEG file"); - return (((unsigned int) c1) << 8) + ((unsigned int) c2); -} - - -/* Routines to write data to output file */ - -static void -write_1_byte (int c) -{ - PUTBYTE(c); -} - -static void -write_2_bytes (unsigned int val) -{ - PUTBYTE((val >> 8) & 0xFF); - PUTBYTE(val & 0xFF); -} - -static void -write_marker (int marker) -{ - PUTBYTE(0xFF); - PUTBYTE(marker); -} - -static void -copy_rest_of_file (void) -{ - int c; - - while ((c = NEXTBYTE()) != EOF) - PUTBYTE(c); -} - - -/* - * JPEG markers consist of one or more 0xFF bytes, followed by a marker - * code byte (which is not an FF). Here are the marker codes of interest - * in this program. (See jdmarker.c for a more complete list.) - */ - -#define M_SOF0 0xC0 /* Start Of Frame N */ -#define M_SOF1 0xC1 /* N indicates which compression process */ -#define M_SOF2 0xC2 /* Only SOF0-SOF2 are now in common use */ -#define M_SOF3 0xC3 -#define M_SOF5 0xC5 /* NB: codes C4 and CC are NOT SOF markers */ -#define M_SOF6 0xC6 -#define M_SOF7 0xC7 -#define M_SOF9 0xC9 -#define M_SOF10 0xCA -#define M_SOF11 0xCB -#define M_SOF13 0xCD -#define M_SOF14 0xCE -#define M_SOF15 0xCF -#define M_SOI 0xD8 /* Start Of Image (beginning of datastream) */ -#define M_EOI 0xD9 /* End Of Image (end of datastream) */ -#define M_SOS 0xDA /* Start Of Scan (begins compressed data) */ -#define M_COM 0xFE /* COMment */ - - -/* - * Find the next JPEG marker and return its marker code. - * We expect at least one FF byte, possibly more if the compressor used FFs - * to pad the file. (Padding FFs will NOT be replicated in the output file.) - * There could also be non-FF garbage between markers. The treatment of such - * garbage is unspecified; we choose to skip over it but emit a warning msg. - * NB: this routine must not be used after seeing SOS marker, since it will - * not deal correctly with FF/00 sequences in the compressed image data... - */ - -static int -next_marker (void) -{ - int c; - int discarded_bytes = 0; - - /* Find 0xFF byte; count and skip any non-FFs. */ - c = read_1_byte(); - while (c != 0xFF) { - discarded_bytes++; - c = read_1_byte(); - } - /* Get marker code byte, swallowing any duplicate FF bytes. Extra FFs - * are legal as pad bytes, so don't count them in discarded_bytes. - */ - do { - c = read_1_byte(); - } while (c == 0xFF); - - if (discarded_bytes != 0) { - fprintf(stderr, "Warning: garbage data found in JPEG file\n"); - } - - return c; -} - - -/* - * Read the initial marker, which should be SOI. - * For a JFIF file, the first two bytes of the file should be literally - * 0xFF M_SOI. To be more general, we could use next_marker, but if the - * input file weren't actually JPEG at all, next_marker might read the whole - * file and then return a misleading error message... - */ - -static int -first_marker (void) -{ - int c1, c2; - - c1 = NEXTBYTE(); - c2 = NEXTBYTE(); - if (c1 != 0xFF || c2 != M_SOI) - ERREXIT("Not a JPEG file"); - return c2; -} - - -/* - * Most types of marker are followed by a variable-length parameter segment. - * This routine skips over the parameters for any marker we don't otherwise - * want to process. - * Note that we MUST skip the parameter segment explicitly in order not to - * be fooled by 0xFF bytes that might appear within the parameter segment; - * such bytes do NOT introduce new markers. - */ - -static void -copy_variable (void) -/* Copy an unknown or uninteresting variable-length marker */ -{ - unsigned int length; - - /* Get the marker parameter length count */ - length = read_2_bytes(); - write_2_bytes(length); - /* Length includes itself, so must be at least 2 */ - if (length < 2) - ERREXIT("Erroneous JPEG marker length"); - length -= 2; - /* Skip over the remaining bytes */ - while (length > 0) { - write_1_byte(read_1_byte()); - length--; - } -} - -static void -skip_variable (void) -/* Skip over an unknown or uninteresting variable-length marker */ -{ - unsigned int length; - - /* Get the marker parameter length count */ - length = read_2_bytes(); - /* Length includes itself, so must be at least 2 */ - if (length < 2) - ERREXIT("Erroneous JPEG marker length"); - length -= 2; - /* Skip over the remaining bytes */ - while (length > 0) { - (void) read_1_byte(); - length--; - } -} - - -/* - * Parse the marker stream until SOFn or EOI is seen; - * copy data to output, but discard COM markers unless keep_COM is true. - */ - -static int -scan_JPEG_header (int keep_COM) -{ - int marker; - - /* Expect SOI at start of file */ - if (first_marker() != M_SOI) - ERREXIT("Expected SOI marker first"); - write_marker(M_SOI); - - /* Scan miscellaneous markers until we reach SOFn. */ - for (;;) { - marker = next_marker(); - switch (marker) { - /* Note that marker codes 0xC4, 0xC8, 0xCC are not, and must not be, - * treated as SOFn. C4 in particular is actually DHT. - */ - case M_SOF0: /* Baseline */ - case M_SOF1: /* Extended sequential, Huffman */ - case M_SOF2: /* Progressive, Huffman */ - case M_SOF3: /* Lossless, Huffman */ - case M_SOF5: /* Differential sequential, Huffman */ - case M_SOF6: /* Differential progressive, Huffman */ - case M_SOF7: /* Differential lossless, Huffman */ - case M_SOF9: /* Extended sequential, arithmetic */ - case M_SOF10: /* Progressive, arithmetic */ - case M_SOF11: /* Lossless, arithmetic */ - case M_SOF13: /* Differential sequential, arithmetic */ - case M_SOF14: /* Differential progressive, arithmetic */ - case M_SOF15: /* Differential lossless, arithmetic */ - return marker; - - case M_SOS: /* should not see compressed data before SOF */ - ERREXIT("SOS without prior SOFn"); - break; - - case M_EOI: /* in case it's a tables-only JPEG stream */ - return marker; - - case M_COM: /* Existing COM: conditionally discard */ - if (keep_COM) { - write_marker(marker); - copy_variable(); - } else { - skip_variable(); - } - break; - - default: /* Anything else just gets copied */ - write_marker(marker); - copy_variable(); /* we assume it has a parameter count... */ - break; - } - } /* end loop */ -} - - -/* Command line parsing code */ - -static const char * progname; /* program name for error messages */ - - -static void -usage (void) -/* complain about bad command line */ -{ - fprintf(stderr, "wrjpgcom inserts a textual comment in a JPEG file.\n"); - fprintf(stderr, "You can add to or replace any existing comment(s).\n"); - - fprintf(stderr, "Usage: %s [switches] ", progname); -#ifdef TWO_FILE_COMMANDLINE - fprintf(stderr, "inputfile outputfile\n"); -#else - fprintf(stderr, "[inputfile]\n"); -#endif - - fprintf(stderr, "Switches (names may be abbreviated):\n"); - fprintf(stderr, " -replace Delete any existing comments\n"); - fprintf(stderr, " -comment \"text\" Insert comment with given text\n"); - fprintf(stderr, " -cfile name Read comment from named file\n"); - fprintf(stderr, "Notice that you must put quotes around the comment text\n"); - fprintf(stderr, "when you use -comment.\n"); - fprintf(stderr, "If you do not give either -comment or -cfile on the command line,\n"); - fprintf(stderr, "then the comment text is read from standard input.\n"); - fprintf(stderr, "It can be multiple lines, up to %u characters total.\n", - (unsigned int) MAX_COM_LENGTH); -#ifndef TWO_FILE_COMMANDLINE - fprintf(stderr, "You must specify an input JPEG file name when supplying\n"); - fprintf(stderr, "comment text from standard input.\n"); -#endif - - exit(EXIT_FAILURE); -} - - -static int -keymatch (char * arg, const char * keyword, int minchars) -/* Case-insensitive matching of (possibly abbreviated) keyword switches. */ -/* keyword is the constant keyword (must be lower case already), */ -/* minchars is length of minimum legal abbreviation. */ -{ - register int ca, ck; - register int nmatched = 0; - - while ((ca = *arg++) != '\0') { - if ((ck = *keyword++) == '\0') - return 0; /* arg longer than keyword, no good */ - if (isupper(ca)) /* force arg to lcase (assume ck is already) */ - ca = tolower(ca); - if (ca != ck) - return 0; /* no good */ - nmatched++; /* count matched characters */ - } - /* reached end of argument; fail if it's too short for unique abbrev */ - if (nmatched < minchars) - return 0; - return 1; /* A-OK */ -} - - -/* - * The main program. - */ - -int -main (int argc, char **argv) -{ - int argn; - char * arg; - int keep_COM = 1; - char * comment_arg = NULL; - FILE * comment_file = NULL; - unsigned int comment_length = 0; - int marker; - - /* On Mac, fetch a command line. */ -#ifdef USE_CCOMMAND - argc = ccommand(&argv); -#endif - - progname = argv[0]; - if (progname == NULL || progname[0] == 0) - progname = "wrjpgcom"; /* in case C library doesn't provide it */ - - /* Parse switches, if any */ - for (argn = 1; argn < argc; argn++) { - arg = argv[argn]; - if (arg[0] != '-') - break; /* not switch, must be file name */ - arg++; /* advance over '-' */ - if (keymatch(arg, "replace", 1)) { - keep_COM = 0; - } else if (keymatch(arg, "cfile", 2)) { - if (++argn >= argc) usage(); - if ((comment_file = fopen(argv[argn], "r")) == NULL) { - fprintf(stderr, "%s: can't open %s\n", progname, argv[argn]); - exit(EXIT_FAILURE); - } - } else if (keymatch(arg, "comment", 1)) { - if (++argn >= argc) usage(); - comment_arg = argv[argn]; - /* If the comment text starts with '"', then we are probably running - * under MS-DOG and must parse out the quoted string ourselves. Sigh. - */ - if (comment_arg[0] == '"') { - comment_arg = (char *) malloc((size_t) MAX_COM_LENGTH); - if (comment_arg == NULL) - ERREXIT("Insufficient memory"); - strcpy(comment_arg, argv[argn]+1); - for (;;) { - comment_length = (unsigned int) strlen(comment_arg); - if (comment_length > 0 && comment_arg[comment_length-1] == '"') { - comment_arg[comment_length-1] = '\0'; /* zap terminating quote */ - break; - } - if (++argn >= argc) - ERREXIT("Missing ending quote mark"); - strcat(comment_arg, " "); - strcat(comment_arg, argv[argn]); - } - } - comment_length = (unsigned int) strlen(comment_arg); - } else - usage(); - } - - /* Cannot use both -comment and -cfile. */ - if (comment_arg != NULL && comment_file != NULL) - usage(); - /* If there is neither -comment nor -cfile, we will read the comment text - * from stdin; in this case there MUST be an input JPEG file name. - */ - if (comment_arg == NULL && comment_file == NULL && argn >= argc) - usage(); - - /* Open the input file. */ - if (argn < argc) { - if ((infile = fopen(argv[argn], READ_BINARY)) == NULL) { - fprintf(stderr, "%s: can't open %s\n", progname, argv[argn]); - exit(EXIT_FAILURE); - } - } else { - /* default input file is stdin */ -#ifdef USE_SETMODE /* need to hack file mode? */ - setmode(fileno(stdin), O_BINARY); -#endif -#ifdef USE_FDOPEN /* need to re-open in binary mode? */ - if ((infile = fdopen(fileno(stdin), READ_BINARY)) == NULL) { - fprintf(stderr, "%s: can't open stdin\n", progname); - exit(EXIT_FAILURE); - } -#else - infile = stdin; -#endif - } - - /* Open the output file. */ -#ifdef TWO_FILE_COMMANDLINE - /* Must have explicit output file name */ - if (argn != argc-2) { - fprintf(stderr, "%s: must name one input and one output file\n", - progname); - usage(); - } - if ((outfile = fopen(argv[argn+1], WRITE_BINARY)) == NULL) { - fprintf(stderr, "%s: can't open %s\n", progname, argv[argn+1]); - exit(EXIT_FAILURE); - } -#else - /* Unix style: expect zero or one file name */ - if (argn < argc-1) { - fprintf(stderr, "%s: only one input file\n", progname); - usage(); - } - /* default output file is stdout */ -#ifdef USE_SETMODE /* need to hack file mode? */ - setmode(fileno(stdout), O_BINARY); -#endif -#ifdef USE_FDOPEN /* need to re-open in binary mode? */ - if ((outfile = fdopen(fileno(stdout), WRITE_BINARY)) == NULL) { - fprintf(stderr, "%s: can't open stdout\n", progname); - exit(EXIT_FAILURE); - } -#else - outfile = stdout; -#endif -#endif /* TWO_FILE_COMMANDLINE */ - - /* Collect comment text from comment_file or stdin, if necessary */ - if (comment_arg == NULL) { - FILE * src_file; - int c; - - comment_arg = (char *) malloc((size_t) MAX_COM_LENGTH); - if (comment_arg == NULL) - ERREXIT("Insufficient memory"); - comment_length = 0; - src_file = (comment_file != NULL ? comment_file : stdin); - while ((c = getc(src_file)) != EOF) { - if (comment_length >= (unsigned int) MAX_COM_LENGTH) { - fprintf(stderr, "Comment text may not exceed %u bytes\n", - (unsigned int) MAX_COM_LENGTH); - exit(EXIT_FAILURE); - } - comment_arg[comment_length++] = (char) c; - } - if (comment_file != NULL) - fclose(comment_file); - } - - /* Copy JPEG headers until SOFn marker; - * we will insert the new comment marker just before SOFn. - * This (a) causes the new comment to appear after, rather than before, - * existing comments; and (b) ensures that comments come after any JFIF - * or JFXX markers, as required by the JFIF specification. - */ - marker = scan_JPEG_header(keep_COM); - /* Insert the new COM marker, but only if nonempty text has been supplied */ - if (comment_length > 0) { - write_marker(M_COM); - write_2_bytes(comment_length + 2); - while (comment_length > 0) { - write_1_byte(*comment_arg++); - comment_length--; - } - } - /* Duplicate the remainder of the source file. - * Note that any COM markers occuring after SOF will not be touched. - */ - write_marker(marker); - copy_rest_of_file(); - - /* All done. */ - exit(EXIT_SUCCESS); - return 0; /* suppress no-return-value warnings */ -} diff --git a/jpeg/wrppm.c b/jpeg/wrppm.c deleted file mode 100755 index 68e0c85..0000000 --- a/jpeg/wrppm.c +++ /dev/null @@ -1,269 +0,0 @@ -/* - * wrppm.c - * - * Copyright (C) 1991-1996, Thomas G. Lane. - * Modified 2009 by Guido Vollbeding. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains routines to write output images in PPM/PGM format. - * The extended 2-byte-per-sample raw PPM/PGM formats are supported. - * The PBMPLUS library is NOT required to compile this software - * (but it is highly useful as a set of PPM image manipulation programs). - * - * These routines may need modification for non-Unix environments or - * specialized applications. As they stand, they assume output to - * an ordinary stdio stream. - */ - -#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ - -#ifdef PPM_SUPPORTED - - -/* - * For 12-bit JPEG data, we either downscale the values to 8 bits - * (to write standard byte-per-sample PPM/PGM files), or output - * nonstandard word-per-sample PPM/PGM files. Downscaling is done - * if PPM_NORAWWORD is defined (this can be done in the Makefile - * or in jconfig.h). - * (When the core library supports data precision reduction, a cleaner - * implementation will be to ask for that instead.) - */ - -#if BITS_IN_JSAMPLE == 8 -#define PUTPPMSAMPLE(ptr,v) *ptr++ = (char) (v) -#define BYTESPERSAMPLE 1 -#define PPM_MAXVAL 255 -#else -#ifdef PPM_NORAWWORD -#define PUTPPMSAMPLE(ptr,v) *ptr++ = (char) ((v) >> (BITS_IN_JSAMPLE-8)) -#define BYTESPERSAMPLE 1 -#define PPM_MAXVAL 255 -#else -/* The word-per-sample format always puts the MSB first. */ -#define PUTPPMSAMPLE(ptr,v) \ - { register int val_ = v; \ - *ptr++ = (char) ((val_ >> 8) & 0xFF); \ - *ptr++ = (char) (val_ & 0xFF); \ - } -#define BYTESPERSAMPLE 2 -#define PPM_MAXVAL ((1<pub.output_file, dest->iobuffer, dest->buffer_width); -} - - -/* - * This code is used when we have to copy the data and apply a pixel - * format translation. Typically this only happens in 12-bit mode. - */ - -METHODDEF(void) -copy_pixel_rows (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo, - JDIMENSION rows_supplied) -{ - ppm_dest_ptr dest = (ppm_dest_ptr) dinfo; - register char * bufferptr; - register JSAMPROW ptr; - register JDIMENSION col; - - ptr = dest->pub.buffer[0]; - bufferptr = dest->iobuffer; - for (col = dest->samples_per_row; col > 0; col--) { - PUTPPMSAMPLE(bufferptr, GETJSAMPLE(*ptr++)); - } - (void) JFWRITE(dest->pub.output_file, dest->iobuffer, dest->buffer_width); -} - - -/* - * Write some pixel data when color quantization is in effect. - * We have to demap the color index values to straight data. - */ - -METHODDEF(void) -put_demapped_rgb (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo, - JDIMENSION rows_supplied) -{ - ppm_dest_ptr dest = (ppm_dest_ptr) dinfo; - register char * bufferptr; - register int pixval; - register JSAMPROW ptr; - register JSAMPROW color_map0 = cinfo->colormap[0]; - register JSAMPROW color_map1 = cinfo->colormap[1]; - register JSAMPROW color_map2 = cinfo->colormap[2]; - register JDIMENSION col; - - ptr = dest->pub.buffer[0]; - bufferptr = dest->iobuffer; - for (col = cinfo->output_width; col > 0; col--) { - pixval = GETJSAMPLE(*ptr++); - PUTPPMSAMPLE(bufferptr, GETJSAMPLE(color_map0[pixval])); - PUTPPMSAMPLE(bufferptr, GETJSAMPLE(color_map1[pixval])); - PUTPPMSAMPLE(bufferptr, GETJSAMPLE(color_map2[pixval])); - } - (void) JFWRITE(dest->pub.output_file, dest->iobuffer, dest->buffer_width); -} - - -METHODDEF(void) -put_demapped_gray (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo, - JDIMENSION rows_supplied) -{ - ppm_dest_ptr dest = (ppm_dest_ptr) dinfo; - register char * bufferptr; - register JSAMPROW ptr; - register JSAMPROW color_map = cinfo->colormap[0]; - register JDIMENSION col; - - ptr = dest->pub.buffer[0]; - bufferptr = dest->iobuffer; - for (col = cinfo->output_width; col > 0; col--) { - PUTPPMSAMPLE(bufferptr, GETJSAMPLE(color_map[GETJSAMPLE(*ptr++)])); - } - (void) JFWRITE(dest->pub.output_file, dest->iobuffer, dest->buffer_width); -} - - -/* - * Startup: write the file header. - */ - -METHODDEF(void) -start_output_ppm (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo) -{ - ppm_dest_ptr dest = (ppm_dest_ptr) dinfo; - - /* Emit file header */ - switch (cinfo->out_color_space) { - case JCS_GRAYSCALE: - /* emit header for raw PGM format */ - fprintf(dest->pub.output_file, "P5\n%ld %ld\n%d\n", - (long) cinfo->output_width, (long) cinfo->output_height, - PPM_MAXVAL); - break; - case JCS_RGB: - /* emit header for raw PPM format */ - fprintf(dest->pub.output_file, "P6\n%ld %ld\n%d\n", - (long) cinfo->output_width, (long) cinfo->output_height, - PPM_MAXVAL); - break; - default: - ERREXIT(cinfo, JERR_PPM_COLORSPACE); - } -} - - -/* - * Finish up at the end of the file. - */ - -METHODDEF(void) -finish_output_ppm (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo) -{ - /* Make sure we wrote the output file OK */ - fflush(dinfo->output_file); - if (ferror(dinfo->output_file)) - ERREXIT(cinfo, JERR_FILE_WRITE); -} - - -/* - * The module selection routine for PPM format output. - */ - -GLOBAL(djpeg_dest_ptr) -jinit_write_ppm (j_decompress_ptr cinfo) -{ - ppm_dest_ptr dest; - - /* Create module interface object, fill in method pointers */ - dest = (ppm_dest_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(ppm_dest_struct)); - dest->pub.start_output = start_output_ppm; - dest->pub.finish_output = finish_output_ppm; - - /* Calculate output image dimensions so we can allocate space */ - jpeg_calc_output_dimensions(cinfo); - - /* Create physical I/O buffer. Note we make this near on a PC. */ - dest->samples_per_row = cinfo->output_width * cinfo->out_color_components; - dest->buffer_width = dest->samples_per_row * (BYTESPERSAMPLE * SIZEOF(char)); - dest->iobuffer = (char *) (*cinfo->mem->alloc_small) - ((j_common_ptr) cinfo, JPOOL_IMAGE, dest->buffer_width); - - if (cinfo->quantize_colors || BITS_IN_JSAMPLE != 8 || - SIZEOF(JSAMPLE) != SIZEOF(char)) { - /* When quantizing, we need an output buffer for colormap indexes - * that's separate from the physical I/O buffer. We also need a - * separate buffer if pixel format translation must take place. - */ - dest->pub.buffer = (*cinfo->mem->alloc_sarray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, - cinfo->output_width * cinfo->output_components, (JDIMENSION) 1); - dest->pub.buffer_height = 1; - if (! cinfo->quantize_colors) - dest->pub.put_pixel_rows = copy_pixel_rows; - else if (cinfo->out_color_space == JCS_GRAYSCALE) - dest->pub.put_pixel_rows = put_demapped_gray; - else - dest->pub.put_pixel_rows = put_demapped_rgb; - } else { - /* We will fwrite() directly from decompressor output buffer. */ - /* Synthesize a JSAMPARRAY pointer structure */ - /* Cast here implies near->far pointer conversion on PCs */ - dest->pixrow = (JSAMPROW) dest->iobuffer; - dest->pub.buffer = & dest->pixrow; - dest->pub.buffer_height = 1; - dest->pub.put_pixel_rows = put_pixel_rows; - } - - return (djpeg_dest_ptr) dest; -} - -#endif /* PPM_SUPPORTED */ diff --git a/jpeg/wrrle.c b/jpeg/wrrle.c deleted file mode 100755 index a4e7337..0000000 --- a/jpeg/wrrle.c +++ /dev/null @@ -1,305 +0,0 @@ -/* - * wrrle.c - * - * Copyright (C) 1991-1996, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains routines to write output images in RLE format. - * The Utah Raster Toolkit library is required (version 3.1 or later). - * - * These routines may need modification for non-Unix environments or - * specialized applications. As they stand, they assume output to - * an ordinary stdio stream. - * - * Based on code contributed by Mike Lijewski, - * with updates from Robert Hutchinson. - */ - -#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ - -#ifdef RLE_SUPPORTED - -/* rle.h is provided by the Utah Raster Toolkit. */ - -#include - -/* - * We assume that JSAMPLE has the same representation as rle_pixel, - * to wit, "unsigned char". Hence we can't cope with 12- or 16-bit samples. - */ - -#if BITS_IN_JSAMPLE != 8 - Sorry, this code only copes with 8-bit JSAMPLEs. /* deliberate syntax err */ -#endif - - -/* - * Since RLE stores scanlines bottom-to-top, we have to invert the image - * from JPEG's top-to-bottom order. To do this, we save the outgoing data - * in a virtual array during put_pixel_row calls, then actually emit the - * RLE file during finish_output. - */ - - -/* - * For now, if we emit an RLE color map then it is always 256 entries long, - * though not all of the entries need be used. - */ - -#define CMAPBITS 8 -#define CMAPLENGTH (1<<(CMAPBITS)) - -typedef struct { - struct djpeg_dest_struct pub; /* public fields */ - - jvirt_sarray_ptr image; /* virtual array to store the output image */ - rle_map *colormap; /* RLE-style color map, or NULL if none */ - rle_pixel **rle_row; /* To pass rows to rle_putrow() */ - -} rle_dest_struct; - -typedef rle_dest_struct * rle_dest_ptr; - -/* Forward declarations */ -METHODDEF(void) rle_put_pixel_rows - JPP((j_decompress_ptr cinfo, djpeg_dest_ptr dinfo, - JDIMENSION rows_supplied)); - - -/* - * Write the file header. - * - * In this module it's easier to wait till finish_output to write anything. - */ - -METHODDEF(void) -start_output_rle (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo) -{ - rle_dest_ptr dest = (rle_dest_ptr) dinfo; - size_t cmapsize; - int i, ci; -#ifdef PROGRESS_REPORT - cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress; -#endif - - /* - * Make sure the image can be stored in RLE format. - * - * - RLE stores image dimensions as *signed* 16 bit integers. JPEG - * uses unsigned, so we have to check the width. - * - * - Colorspace is expected to be grayscale or RGB. - * - * - The number of channels (components) is expected to be 1 (grayscale/ - * pseudocolor) or 3 (truecolor/directcolor). - * (could be 2 or 4 if using an alpha channel, but we aren't) - */ - - if (cinfo->output_width > 32767 || cinfo->output_height > 32767) - ERREXIT2(cinfo, JERR_RLE_DIMENSIONS, cinfo->output_width, - cinfo->output_height); - - if (cinfo->out_color_space != JCS_GRAYSCALE && - cinfo->out_color_space != JCS_RGB) - ERREXIT(cinfo, JERR_RLE_COLORSPACE); - - if (cinfo->output_components != 1 && cinfo->output_components != 3) - ERREXIT1(cinfo, JERR_RLE_TOOMANYCHANNELS, cinfo->num_components); - - /* Convert colormap, if any, to RLE format. */ - - dest->colormap = NULL; - - if (cinfo->quantize_colors) { - /* Allocate storage for RLE-style cmap, zero any extra entries */ - cmapsize = cinfo->out_color_components * CMAPLENGTH * SIZEOF(rle_map); - dest->colormap = (rle_map *) (*cinfo->mem->alloc_small) - ((j_common_ptr) cinfo, JPOOL_IMAGE, cmapsize); - MEMZERO(dest->colormap, cmapsize); - - /* Save away data in RLE format --- note 8-bit left shift! */ - /* Shifting would need adjustment for JSAMPLEs wider than 8 bits. */ - for (ci = 0; ci < cinfo->out_color_components; ci++) { - for (i = 0; i < cinfo->actual_number_of_colors; i++) { - dest->colormap[ci * CMAPLENGTH + i] = - GETJSAMPLE(cinfo->colormap[ci][i]) << 8; - } - } - } - - /* Set the output buffer to the first row */ - dest->pub.buffer = (*cinfo->mem->access_virt_sarray) - ((j_common_ptr) cinfo, dest->image, (JDIMENSION) 0, (JDIMENSION) 1, TRUE); - dest->pub.buffer_height = 1; - - dest->pub.put_pixel_rows = rle_put_pixel_rows; - -#ifdef PROGRESS_REPORT - if (progress != NULL) { - progress->total_extra_passes++; /* count file writing as separate pass */ - } -#endif -} - - -/* - * Write some pixel data. - * - * This routine just saves the data away in a virtual array. - */ - -METHODDEF(void) -rle_put_pixel_rows (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo, - JDIMENSION rows_supplied) -{ - rle_dest_ptr dest = (rle_dest_ptr) dinfo; - - if (cinfo->output_scanline < cinfo->output_height) { - dest->pub.buffer = (*cinfo->mem->access_virt_sarray) - ((j_common_ptr) cinfo, dest->image, - cinfo->output_scanline, (JDIMENSION) 1, TRUE); - } -} - -/* - * Finish up at the end of the file. - * - * Here is where we really output the RLE file. - */ - -METHODDEF(void) -finish_output_rle (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo) -{ - rle_dest_ptr dest = (rle_dest_ptr) dinfo; - rle_hdr header; /* Output file information */ - rle_pixel **rle_row, *red, *green, *blue; - JSAMPROW output_row; - char cmapcomment[80]; - int row, col; - int ci; -#ifdef PROGRESS_REPORT - cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress; -#endif - - /* Initialize the header info */ - header = *rle_hdr_init(NULL); - header.rle_file = dest->pub.output_file; - header.xmin = 0; - header.xmax = cinfo->output_width - 1; - header.ymin = 0; - header.ymax = cinfo->output_height - 1; - header.alpha = 0; - header.ncolors = cinfo->output_components; - for (ci = 0; ci < cinfo->output_components; ci++) { - RLE_SET_BIT(header, ci); - } - if (cinfo->quantize_colors) { - header.ncmap = cinfo->out_color_components; - header.cmaplen = CMAPBITS; - header.cmap = dest->colormap; - /* Add a comment to the output image with the true colormap length. */ - sprintf(cmapcomment, "color_map_length=%d", cinfo->actual_number_of_colors); - rle_putcom(cmapcomment, &header); - } - - /* Emit the RLE header and color map (if any) */ - rle_put_setup(&header); - - /* Now output the RLE data from our virtual array. - * We assume here that (a) rle_pixel is represented the same as JSAMPLE, - * and (b) we are not on a machine where FAR pointers differ from regular. - */ - -#ifdef PROGRESS_REPORT - if (progress != NULL) { - progress->pub.pass_limit = cinfo->output_height; - progress->pub.pass_counter = 0; - (*progress->pub.progress_monitor) ((j_common_ptr) cinfo); - } -#endif - - if (cinfo->output_components == 1) { - for (row = cinfo->output_height-1; row >= 0; row--) { - rle_row = (rle_pixel **) (*cinfo->mem->access_virt_sarray) - ((j_common_ptr) cinfo, dest->image, - (JDIMENSION) row, (JDIMENSION) 1, FALSE); - rle_putrow(rle_row, (int) cinfo->output_width, &header); -#ifdef PROGRESS_REPORT - if (progress != NULL) { - progress->pub.pass_counter++; - (*progress->pub.progress_monitor) ((j_common_ptr) cinfo); - } -#endif - } - } else { - for (row = cinfo->output_height-1; row >= 0; row--) { - rle_row = (rle_pixel **) dest->rle_row; - output_row = * (*cinfo->mem->access_virt_sarray) - ((j_common_ptr) cinfo, dest->image, - (JDIMENSION) row, (JDIMENSION) 1, FALSE); - red = rle_row[0]; - green = rle_row[1]; - blue = rle_row[2]; - for (col = cinfo->output_width; col > 0; col--) { - *red++ = GETJSAMPLE(*output_row++); - *green++ = GETJSAMPLE(*output_row++); - *blue++ = GETJSAMPLE(*output_row++); - } - rle_putrow(rle_row, (int) cinfo->output_width, &header); -#ifdef PROGRESS_REPORT - if (progress != NULL) { - progress->pub.pass_counter++; - (*progress->pub.progress_monitor) ((j_common_ptr) cinfo); - } -#endif - } - } - -#ifdef PROGRESS_REPORT - if (progress != NULL) - progress->completed_extra_passes++; -#endif - - /* Emit file trailer */ - rle_puteof(&header); - fflush(dest->pub.output_file); - if (ferror(dest->pub.output_file)) - ERREXIT(cinfo, JERR_FILE_WRITE); -} - - -/* - * The module selection routine for RLE format output. - */ - -GLOBAL(djpeg_dest_ptr) -jinit_write_rle (j_decompress_ptr cinfo) -{ - rle_dest_ptr dest; - - /* Create module interface object, fill in method pointers */ - dest = (rle_dest_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(rle_dest_struct)); - dest->pub.start_output = start_output_rle; - dest->pub.finish_output = finish_output_rle; - - /* Calculate output image dimensions so we can allocate space */ - jpeg_calc_output_dimensions(cinfo); - - /* Allocate a work array for output to the RLE library. */ - dest->rle_row = (*cinfo->mem->alloc_sarray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, - cinfo->output_width, (JDIMENSION) cinfo->output_components); - - /* Allocate a virtual array to hold the image. */ - dest->image = (*cinfo->mem->request_virt_sarray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE, - (JDIMENSION) (cinfo->output_width * cinfo->output_components), - cinfo->output_height, (JDIMENSION) 1); - - return (djpeg_dest_ptr) dest; -} - -#endif /* RLE_SUPPORTED */ diff --git a/jpeg/wrtarga.c b/jpeg/wrtarga.c deleted file mode 100755 index cf104d2..0000000 --- a/jpeg/wrtarga.c +++ /dev/null @@ -1,253 +0,0 @@ -/* - * wrtarga.c - * - * Copyright (C) 1991-1996, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains routines to write output images in Targa format. - * - * These routines may need modification for non-Unix environments or - * specialized applications. As they stand, they assume output to - * an ordinary stdio stream. - * - * Based on code contributed by Lee Daniel Crocker. - */ - -#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ - -#ifdef TARGA_SUPPORTED - - -/* - * To support 12-bit JPEG data, we'd have to scale output down to 8 bits. - * This is not yet implemented. - */ - -#if BITS_IN_JSAMPLE != 8 - Sorry, this code only copes with 8-bit JSAMPLEs. /* deliberate syntax err */ -#endif - -/* - * The output buffer needs to be writable by fwrite(). On PCs, we must - * allocate the buffer in near data space, because we are assuming small-data - * memory model, wherein fwrite() can't reach far memory. If you need to - * process very wide images on a PC, you might have to compile in large-memory - * model, or else replace fwrite() with a putc() loop --- which will be much - * slower. - */ - - -/* Private version of data destination object */ - -typedef struct { - struct djpeg_dest_struct pub; /* public fields */ - - char *iobuffer; /* physical I/O buffer */ - JDIMENSION buffer_width; /* width of one row */ -} tga_dest_struct; - -typedef tga_dest_struct * tga_dest_ptr; - - -LOCAL(void) -write_header (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo, int num_colors) -/* Create and write a Targa header */ -{ - char targaheader[18]; - - /* Set unused fields of header to 0 */ - MEMZERO(targaheader, SIZEOF(targaheader)); - - if (num_colors > 0) { - targaheader[1] = 1; /* color map type 1 */ - targaheader[5] = (char) (num_colors & 0xFF); - targaheader[6] = (char) (num_colors >> 8); - targaheader[7] = 24; /* 24 bits per cmap entry */ - } - - targaheader[12] = (char) (cinfo->output_width & 0xFF); - targaheader[13] = (char) (cinfo->output_width >> 8); - targaheader[14] = (char) (cinfo->output_height & 0xFF); - targaheader[15] = (char) (cinfo->output_height >> 8); - targaheader[17] = 0x20; /* Top-down, non-interlaced */ - - if (cinfo->out_color_space == JCS_GRAYSCALE) { - targaheader[2] = 3; /* image type = uncompressed gray-scale */ - targaheader[16] = 8; /* bits per pixel */ - } else { /* must be RGB */ - if (num_colors > 0) { - targaheader[2] = 1; /* image type = colormapped RGB */ - targaheader[16] = 8; - } else { - targaheader[2] = 2; /* image type = uncompressed RGB */ - targaheader[16] = 24; - } - } - - if (JFWRITE(dinfo->output_file, targaheader, 18) != (size_t) 18) - ERREXIT(cinfo, JERR_FILE_WRITE); -} - - -/* - * Write some pixel data. - * In this module rows_supplied will always be 1. - */ - -METHODDEF(void) -put_pixel_rows (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo, - JDIMENSION rows_supplied) -/* used for unquantized full-color output */ -{ - tga_dest_ptr dest = (tga_dest_ptr) dinfo; - register JSAMPROW inptr; - register char * outptr; - register JDIMENSION col; - - inptr = dest->pub.buffer[0]; - outptr = dest->iobuffer; - for (col = cinfo->output_width; col > 0; col--) { - outptr[0] = (char) GETJSAMPLE(inptr[2]); /* RGB to BGR order */ - outptr[1] = (char) GETJSAMPLE(inptr[1]); - outptr[2] = (char) GETJSAMPLE(inptr[0]); - inptr += 3, outptr += 3; - } - (void) JFWRITE(dest->pub.output_file, dest->iobuffer, dest->buffer_width); -} - -METHODDEF(void) -put_gray_rows (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo, - JDIMENSION rows_supplied) -/* used for grayscale OR quantized color output */ -{ - tga_dest_ptr dest = (tga_dest_ptr) dinfo; - register JSAMPROW inptr; - register char * outptr; - register JDIMENSION col; - - inptr = dest->pub.buffer[0]; - outptr = dest->iobuffer; - for (col = cinfo->output_width; col > 0; col--) { - *outptr++ = (char) GETJSAMPLE(*inptr++); - } - (void) JFWRITE(dest->pub.output_file, dest->iobuffer, dest->buffer_width); -} - - -/* - * Write some demapped pixel data when color quantization is in effect. - * For Targa, this is only applied to grayscale data. - */ - -METHODDEF(void) -put_demapped_gray (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo, - JDIMENSION rows_supplied) -{ - tga_dest_ptr dest = (tga_dest_ptr) dinfo; - register JSAMPROW inptr; - register char * outptr; - register JSAMPROW color_map0 = cinfo->colormap[0]; - register JDIMENSION col; - - inptr = dest->pub.buffer[0]; - outptr = dest->iobuffer; - for (col = cinfo->output_width; col > 0; col--) { - *outptr++ = (char) GETJSAMPLE(color_map0[GETJSAMPLE(*inptr++)]); - } - (void) JFWRITE(dest->pub.output_file, dest->iobuffer, dest->buffer_width); -} - - -/* - * Startup: write the file header. - */ - -METHODDEF(void) -start_output_tga (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo) -{ - tga_dest_ptr dest = (tga_dest_ptr) dinfo; - int num_colors, i; - FILE *outfile; - - if (cinfo->out_color_space == JCS_GRAYSCALE) { - /* Targa doesn't have a mapped grayscale format, so we will */ - /* demap quantized gray output. Never emit a colormap. */ - write_header(cinfo, dinfo, 0); - if (cinfo->quantize_colors) - dest->pub.put_pixel_rows = put_demapped_gray; - else - dest->pub.put_pixel_rows = put_gray_rows; - } else if (cinfo->out_color_space == JCS_RGB) { - if (cinfo->quantize_colors) { - /* We only support 8-bit colormap indexes, so only 256 colors */ - num_colors = cinfo->actual_number_of_colors; - if (num_colors > 256) - ERREXIT1(cinfo, JERR_TOO_MANY_COLORS, num_colors); - write_header(cinfo, dinfo, num_colors); - /* Write the colormap. Note Targa uses BGR byte order */ - outfile = dest->pub.output_file; - for (i = 0; i < num_colors; i++) { - putc(GETJSAMPLE(cinfo->colormap[2][i]), outfile); - putc(GETJSAMPLE(cinfo->colormap[1][i]), outfile); - putc(GETJSAMPLE(cinfo->colormap[0][i]), outfile); - } - dest->pub.put_pixel_rows = put_gray_rows; - } else { - write_header(cinfo, dinfo, 0); - dest->pub.put_pixel_rows = put_pixel_rows; - } - } else { - ERREXIT(cinfo, JERR_TGA_COLORSPACE); - } -} - - -/* - * Finish up at the end of the file. - */ - -METHODDEF(void) -finish_output_tga (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo) -{ - /* Make sure we wrote the output file OK */ - fflush(dinfo->output_file); - if (ferror(dinfo->output_file)) - ERREXIT(cinfo, JERR_FILE_WRITE); -} - - -/* - * The module selection routine for Targa format output. - */ - -GLOBAL(djpeg_dest_ptr) -jinit_write_targa (j_decompress_ptr cinfo) -{ - tga_dest_ptr dest; - - /* Create module interface object, fill in method pointers */ - dest = (tga_dest_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(tga_dest_struct)); - dest->pub.start_output = start_output_tga; - dest->pub.finish_output = finish_output_tga; - - /* Calculate output image dimensions so we can allocate space */ - jpeg_calc_output_dimensions(cinfo); - - /* Create I/O buffer. Note we make this near on a PC. */ - dest->buffer_width = cinfo->output_width * cinfo->output_components; - dest->iobuffer = (char *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - (size_t) (dest->buffer_width * SIZEOF(char))); - - /* Create decompressor output buffer. */ - dest->pub.buffer = (*cinfo->mem->alloc_sarray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, dest->buffer_width, (JDIMENSION) 1); - dest->pub.buffer_height = 1; - - return (djpeg_dest_ptr) dest; -} - -#endif /* TARGA_SUPPORTED */ -- cgit v1.2.3