From 094535c010320967639e8e86f974d878e80baa72 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?J=C3=B6rg=20Frings-F=C3=BCrst?= Date: Fri, 1 May 2015 16:13:57 +0200 Subject: Imported Upstream version 1.7.0 --- png/INSTALL | 369 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 369 insertions(+) create mode 100644 png/INSTALL (limited to 'png/INSTALL') diff --git a/png/INSTALL b/png/INSTALL new file mode 100644 index 0000000..b645491 --- /dev/null +++ b/png/INSTALL @@ -0,0 +1,369 @@ + +Installing libpng + +Contents + + I. Simple installation + II. Rebuilding the configure scripts + III. Using scripts/makefile* + IV. Using cmake + V. Directory structure + VI. Building with project files + VII. Building with makefiles +VIII. Configuring libpng for 16-bit platforms + IX. Configuring for DOS + X. Configuring for Medium Model + XI. Prepending a prefix to exported symbols + XII. Configuring for compiler xxx: +XIII. Removing unwanted object code + XIV. Changes to the build and configuration of libpng in libpng-1.5.x + XV. Configuring libpng for multiprocessing + XVI. Other sources of information about libpng: + +I. Simple installation + +On Unix/Linux and similar systems, you can simply type + + ./configure [--prefix=/path] + make check + make install + +and ignore the rest of this document. + +II. Rebuilding the configure scripts + +If configure does not work on your system, or if you have a need to +change configure.ac or Makefile.am, and you have a reasonably +up-to-date set of tools, running ./autogen.sh in a git clone before +running ./configure may fix the problem. To be really sure that you +aren't using any of the included pre-built scripts, you can do this: + + ./configure --enable-maintainer-mode + make maintainer-clean + ./autogen.sh --maintainer --clean + ./autogen.sh --maintainer + ./configure [--prefix=/path] [other options] + make + make install + make check + +III. Using scripts/makefile* + +Instead, you can use one of the custom-built makefiles in the +"scripts" directory + + cp scripts/pnglibconf.h.prebuilt pnglibconf.h + cp scripts/makefile.system makefile + make test + make install + +The files that are presently available in the scripts directory +are listed and described in scripts/README.txt. + +Or you can use one of the "projects" in the "projects" directory. + +Before installing libpng, you must first install zlib, if it +is not already on your system. zlib can usually be found +wherever you got libpng. zlib can be placed in another directory, +at the same level as libpng. + +If your system already has a preinstalled zlib you will still need +to have access to the zlib.h and zconf.h include files that +correspond to the version of zlib that's installed. + +If you wish to test with a particular zlib that is not first in the +standard library search path, put ZLIBLIB, ZLIBINC, CPPFLAGS, LDFLAGS, +and LD_LIBRARY_PATH in your environment before running "make test" +or "make distcheck": + +ZLIBLIB=/path/to/lib export ZLIBLIB +ZLIBINC=/path/to/include export ZLIBINC +CPPFLAGS="-I$ZLIBINC" export CPPFLAGS +LDFLAGS="-L$ZLIBLIB" export LDFLAGS +LD_LIBRARY_PATH="$ZLIBLIB:$LD_LIBRARY_PATH" export LD_LIBRARY_PATH + +If you are using one of the makefile scripts, put ZLIBLIB and ZLIBINC +in your environment and type "make ZLIBLIB=$ZLIBLIB ZLIBINC=$ZLIBINC test". + +IV. Using cmake + +If you want to use "cmake" (see www.cmake.org), type + + cmake . -DCMAKE_INSTALL_PREFIX=/path + make + make install + +V. Directory structure + +You can rename the directories that you downloaded (they +might be called "libpng-x.y.z" or "libpngNN" and "zlib-1.2.8" +or "zlib128") so that you have directories called "zlib" and "libpng". + +Your directory structure should look like this: + + .. (the parent directory) + libpng (this directory) + INSTALL (this file) + README + *.h + *.c + CMakeLists.txt => "cmake" script + configuration files: + configure.ac, configure, Makefile.am, Makefile.in, + autogen.sh, config.guess, ltmain.sh, missing, libpng.pc.in, + libpng-config.in, aclocal.m4, config.h.in, config.sub, + depcomp, install-sh, mkinstalldirs, test-pngtest.sh + contrib + gregbook + libtests + pngminim + pngminus + pngsuite + visupng + projects + visualc71 + vstudio + scripts + makefile.* + *.def (module definition files) + etc. + pngtest.png + etc. + zlib + README + *.h + *.c + contrib + etc. + +If the line endings in the files look funny, you may wish to get the other +distribution of libpng. It is available in both tar.gz (UNIX style line +endings) and zip (DOS style line endings) formats. + +VI. Building with project files + +If you are building libpng with MSVC, you can enter the +libpng projects\visualc6 or visualc71 directory and follow the instructions +in README.txt. + +Otherwise enter the zlib directory and follow the instructions in zlib/README, +then come back here and run "configure" or choose the appropriate +makefile.sys in the scripts directory. + +VII. Building with makefiles + +Copy the file (or files) that you need from the +scripts directory into this directory, for example + + MSDOS example: copy scripts\makefile.msc makefile + copy scripts\pnglibconf.h.prebuilt pnglibconf.h + UNIX example: cp scripts/makefile.std makefile + cp scripts/pnglibconf.h.prebuilt pnglibconf.h + +Read the makefile to see if you need to change any source or +target directories to match your preferences. + +Then read pnglibconf.dfa to see if you want to make any configuration +changes. + +Then just run "make" which will create the libpng library in +this directory and "make test" which will run a quick test that reads +the "pngtest.png" file and writes a "pngout.png" file that should be +identical to it. Look for "9782 zero samples" in the output of the +test. For more confidence, you can run another test by typing +"pngtest pngnow.png" and looking for "289 zero samples" in the output. +Also, you can run "pngtest -m contrib/pngsuite/*.png" and compare +your output with the result shown in contrib/pngsuite/README. + +Most of the makefiles will allow you to run "make install" to +put the library in its final resting place (if you want to +do that, run "make install" in the zlib directory first if necessary). +Some also allow you to run "make test-installed" after you have +run "make install". + +VIII. Configuring libpng for 16-bit platforms + +You will want to look into zconf.h to tell zlib (and thus libpng) that +it cannot allocate more then 64K at a time. Even if you can, the memory +won't be accessible. So limit zlib and libpng to 64K by defining MAXSEG_64K. + +IX. Configuring for DOS + +For DOS users who only have access to the lower 640K, you will +have to limit zlib's memory usage via a png_set_compression_mem_level() +call. See zlib.h or zconf.h in the zlib library for more information. + +X. Configuring for Medium Model + +Libpng's support for medium model has been tested on most of the popular +compilers. Make sure MAXSEG_64K gets defined, USE_FAR_KEYWORD gets +defined, and FAR gets defined to far in pngconf.h, and you should be +all set. Everything in the library (except for zlib's structure) is +expecting far data. You must use the typedefs with the p or pp on +the end for pointers (or at least look at them and be careful). Make +note that the rows of data are defined as png_bytepp, which is +an "unsigned char far * far *". + +XI. Prepending a prefix to exported symbols + +Starting with libpng-1.6.0, you can configure libpng (when using the +"configure" script) to prefix all exported symbols by means of the +configuration option "--with-libpng-prefix=FOO_", where FOO_ can be any +string beginning with a letter and containing only uppercase +and lowercase letters, digits, and the underscore (i.e., a C language +identifier). This creates a set of macros in pnglibconf.h, so this is +transparent to applications; their function calls get transformed by +the macros to use the modified names. + +XII. Configuring for compiler xxx: + +All includes for libpng are in pngconf.h. If you need to add, change +or delete an include, this is the place to do it. +The includes that are not needed outside libpng are placed in pngpriv.h, +which is only used by the routines inside libpng itself. +The files in libpng proper only include pngpriv.h and png.h, which +in turn includes pngconf.h and, as of libpng-1.5.0, pnglibconf.h. +As of libpng-1.5.0, pngpriv.h also includes three other private header +files, pngstruct.h, pnginfo.h, and pngdebug.h, which contain material +that previously appeared in the public headers. + +XIII. Removing unwanted object code + +There are a bunch of #define's in pngconf.h that control what parts of +libpng are compiled. All the defines end in _SUPPORTED. If you are +never going to use a capability, you can change the #define to #undef +before recompiling libpng and save yourself code and data space, or +you can turn off individual capabilities with defines that begin with +PNG_NO_. + +In libpng-1.5.0 and later, the #define's are in pnglibconf.h instead. + +You can also turn all of the transforms and ancillary chunk capabilities +off en masse with compiler directives that define +PNG_NO_READ[or WRITE]_TRANSFORMS, or PNG_NO_READ[or WRITE]_ANCILLARY_CHUNKS, +or all four, along with directives to turn on any of the capabilities that +you do want. The PNG_NO_READ[or WRITE]_TRANSFORMS directives disable the +extra transformations but still leave the library fully capable of reading +and writing PNG files with all known public chunks. Use of the +PNG_NO_READ[or WRITE]_ANCILLARY_CHUNKS directive produces a library +that is incapable of reading or writing ancillary chunks. If you are +not using the progressive reading capability, you can turn that off +with PNG_NO_PROGRESSIVE_READ (don't confuse this with the INTERLACING +capability, which you'll still have). + +All the reading and writing specific code are in separate files, so the +linker should only grab the files it needs. However, if you want to +make sure, or if you are building a stand alone library, all the +reading files start with "pngr" and all the writing files start with "pngw". +The files that don't match either (like png.c, pngtrans.c, etc.) +are used for both reading and writing, and always need to be included. +The progressive reader is in pngpread.c + +If you are creating or distributing a dynamically linked library (a .so +or DLL file), you should not remove or disable any parts of the library, +as this will cause applications linked with different versions of the +library to fail if they call functions not available in your library. +The size of the library itself should not be an issue, because only +those sections that are actually used will be loaded into memory. + +XIV. Changes to the build and configuration of libpng in libpng-1.5.x + +Details of internal changes to the library code can be found in the CHANGES +file and in the GIT repository logs. These will be of no concern to the vast +majority of library users or builders; however, the few who configure libpng +to a non-default feature set may need to change how this is done. + +There should be no need for library builders to alter build scripts if +these use the distributed build support - configure or the makefiles - +however, users of the makefiles may care to update their build scripts +to build pnglibconf.h where the corresponding makefile does not do so. + +Building libpng with a non-default configuration has changed completely. +The old method using pngusr.h should still work correctly even though the +way pngusr.h is used in the build has been changed; however, library +builders will probably want to examine the changes to take advantage of +new capabilities and to simplify their build system. + +A. Specific changes to library configuration capabilities + +The exact mechanism used to control attributes of API functions has +changed. A single set of operating system independent macro definitions +is used and operating system specific directives are defined in +pnglibconf.h + +As part of this the mechanism used to choose procedure call standards on +those systems that allow a choice has been changed. At present this only +affects certain Microsoft (DOS, Windows) and IBM (OS/2) operating systems +running on Intel processors. As before, PNGAPI is defined where required +to control the exported API functions; however, two new macros, PNGCBAPI +and PNGCAPI, are used instead for callback functions (PNGCBAPI) and +(PNGCAPI) for functions that must match a C library prototype (currently +only png_longjmp_ptr, which must match the C longjmp function.) The new +approach is documented in pngconf.h + +Despite these changes, libpng 1.5.0 only supports the native C function +calling standard on those platforms tested so far (__cdecl on Microsoft +Windows). This is because the support requirements for alternative +calling conventions seem to no longer exist. Developers who find it +necessary to set PNG_API_RULE to 1 should advise the mailing list +(png-mng-implement) of this and library builders who use Openwatcom and +therefore set PNG_API_RULE to 2 should also contact the mailing list. + +B. Changes to the configuration mechanism + +Prior to libpng-1.5.0 library builders who needed to configure libpng +had either to modify the exported pngconf.h header file to add system +specific configuration or had to write feature selection macros into +pngusr.h and cause this to be included into pngconf.h by defining +PNG_USER_CONFIG. The latter mechanism had the disadvantage that an +application built without PNG_USER_CONFIG defined would see the +unmodified, default, libpng API and thus would probably fail to link. + +These mechanisms still work in the configure build and in any makefile +build that builds pnglibconf.h, although the feature selection macros +have changed somewhat as described above. In 1.5.0, however, pngusr.h is +processed only once, when the exported header file pnglibconf.h is built. +pngconf.h no longer includes pngusr.h, therefore pngusr.h is ignored after the +build of pnglibconf.h and it is never included in an application build. + +The rarely used alternative of adding a list of feature macros to the +CPPFLAGS setting in the build also still works; however, the macros will be +copied to pnglibconf.h and this may produce macro redefinition warnings +when the individual C files are compiled. + +All configuration now only works if pnglibconf.h is built from +scripts/pnglibconf.dfa. This requires the program awk. Brian Kernighan +(the original author of awk) maintains C source code of that awk and this +and all known later implementations (often called by subtly different +names - nawk and gawk for example) are adequate to build pnglibconf.h. +The Sun Microsystems (now Oracle) program 'awk' is an earlier version +and does not work; this may also apply to other systems that have a +functioning awk called 'nawk'. + +Configuration options are now documented in scripts/pnglibconf.dfa. This +file also includes dependency information that ensures a configuration is +consistent; that is, if a feature is switched off dependent features are +also removed. As a recommended alternative to using feature macros in +pngusr.h a system builder may also define equivalent options in pngusr.dfa +(or, indeed, any file) and add that to the configuration by setting +DFA_XTRA to the file name. The makefiles in contrib/pngminim illustrate +how to do this, and a case where pngusr.h is still required. + +XV. Configuring libpng for multiprocessing + +Libpng uses setjmp()/longjmp() for error handling. Unfortunately setjmp() +is known to be not thread-safe on some platforms and we don't know of +any platform where it is guaranteed to be thread-safe. Therefore, if +your application is going to be using multiple threads, you should +configure libpng with PNG_NO_SETJMP in your pngusr.dfa file, with +-DPNG_NO_SETJMP on your compile line, or with + + #undef PNG_SETJMP_SUPPORTED + +in your pnglibconf.h or pngusr.h. + +XVI. Other sources of information about libpng: + +Further information can be found in the README and libpng-manual.txt +files, in the individual makefiles, in png.h, and the manual pages +libpng.3 and png.5. -- cgit v1.2.3