From 094535c010320967639e8e86f974d878e80baa72 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?J=C3=B6rg=20Frings-F=C3=BCrst?= <debian@jff-webhosting.net>
Date: Fri, 1 May 2015 16:13:57 +0200
Subject: Imported Upstream version 1.7.0

---
 spectro/ex1.h | 88 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 88 insertions(+)
 create mode 100644 spectro/ex1.h

(limited to 'spectro/ex1.h')

diff --git a/spectro/ex1.h b/spectro/ex1.h
new file mode 100644
index 0000000..456ab75
--- /dev/null
+++ b/spectro/ex1.h
@@ -0,0 +1,88 @@
+#ifndef EX1_H
+
+/* 
+ * Argyll Color Correction System
+ *
+ * Image Engineering EX1
+ *
+ * Author: Graeme W. Gill
+ * Date:   4/4/2015
+ *
+ * Copyright 2001 - 2015, Graeme W. Gill
+ * All rights reserved.
+ *
+ * This material is licenced under the GNU GENERAL PUBLIC LICENSE Version 2 or later :-
+ * see the License2.txt file for licencing details.
+ *
+ * Based on spebos.h
+ */
+
+/* 
+   If you make use of the instrument driver code here, please note
+   that it is the author(s) of the code who take responsibility
+   for its operation. Any problems or queries regarding driving
+   instruments with the Argyll drivers, should be directed to
+   the Argyll's author(s), and not to any other party.
+
+   If there is some instrument feature or function that you
+   would like supported here, it is recommended that you
+   contact Argyll's author(s) first, rather than attempt to
+   modify the software yourself, if you don't have firm knowledge
+   of the instrument communicate protocols. There is a chance
+   that an instrument could be damaged by an incautious command
+   sequence, and the instrument companies generally cannot and
+   will not support developers that they have not qualified
+   and agreed to support.
+ */
+
+#include "inst.h"
+
+/* Fake Error codes */
+#define EX1_INTERNAL_ERROR			0xff01		/* Internal software error */
+#define EX1_TIMEOUT				    0xff02		/* Communication timeout */
+#define EX1_COMS_FAIL				0xff03		/* Communication failure */
+#define EX1_UNKNOWN_MODEL			0xff04		/* Not a JETI ex1 */
+#define EX1_DATA_PARSE_ERROR  		0xff05		/* Read data parsing error */
+
+
+/* Real instrument error code */
+#define EX1_OK						0
+#define EX1_NOT_IMP					1
+
+/* Internal software errors */
+#define EX1_INT_THREADFAILED       1000
+
+/* EX1 communication object */
+struct _ex1 {
+	INST_OBJ_BASE
+
+	amutex lock;				/* Command lock (not necessary) */
+
+	int model;					/* ex1 model number */
+
+	inst_mode mode;				/* Currently instrument mode */
+
+	int refrmode;				/* nz if in refresh display mode */
+								/* (1201 has a refresh mode ?? but can't measure frequency) */
+	int    rrset;				/* Flag, nz if the refresh rate has been determined */
+	double refperiod;			/* if > 0.0 in refmode, target int time quantization */
+	double refrate;				/* Measured refresh rate in Hz */
+	int    refrvalid;			/* nz if refrate is valid */
+
+	inst_opt_type trig;			/* Reading trigger mode */
+
+	double measto;				/* Expected measurement timeout value */
+	int nbands;					/* Number of spectral bands */
+	double wl_short;
+	double wl_long;
+
+	/* Other state */
+
+	}; typedef struct _ex1 ex1;
+
+/* Constructor */
+extern ex1 *new_ex1(icoms *icom, instType itype);
+
+
+#define EX1_H
+#endif /* EX1_H */
-- 
cgit v1.2.3