From c0b89ac5bfb90835ef01573267020e42d4fe070c Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?J=C3=B6rg=20Frings-F=C3=BCrst?= Date: Sun, 23 Aug 2015 12:17:05 +0200 Subject: Imported Upstream version 1.8.0 --- tiff/html/man/Makefile.am | 119 - tiff/html/man/Makefile.in | 556 ----- tiff/html/man/TIFFClose.3tiff.html | 87 - tiff/html/man/TIFFDataWidth.3tiff.html | 98 - tiff/html/man/TIFFError.3tiff.html | 106 - tiff/html/man/TIFFFlush.3tiff.html | 113 - tiff/html/man/TIFFGetField.3tiff.html | 1446 ----------- tiff/html/man/TIFFOpen.3tiff.html | 421 ---- tiff/html/man/TIFFPrintDirectory.3tiff.html | 225 -- tiff/html/man/TIFFRGBAImage.3tiff.html | 319 --- tiff/html/man/TIFFReadDirectory.3tiff.html | 218 -- tiff/html/man/TIFFReadEncodedStrip.3tiff.html | 133 - tiff/html/man/TIFFReadEncodedTile.3tiff.html | 130 - tiff/html/man/TIFFReadRGBAImage.3tiff.html | 301 --- tiff/html/man/TIFFReadRGBAStrip.3tiff.html | 208 -- tiff/html/man/TIFFReadRGBATile.3tiff.html | 261 -- tiff/html/man/TIFFReadRawStrip.3tiff.html | 109 - tiff/html/man/TIFFReadRawTile.3tiff.html | 111 - tiff/html/man/TIFFReadScanline.3tiff.html | 157 -- tiff/html/man/TIFFReadTile.3tiff.html | 133 - tiff/html/man/TIFFSetDirectory.3tiff.html | 122 - tiff/html/man/TIFFSetField.3tiff.html | 1362 ---------- tiff/html/man/TIFFWarning.3tiff.html | 108 - tiff/html/man/TIFFWriteDirectory.3tiff.html | 176 -- tiff/html/man/TIFFWriteEncodedStrip.3tiff.html | 153 -- tiff/html/man/TIFFWriteEncodedTile.3tiff.html | 147 -- tiff/html/man/TIFFWriteRawStrip.3tiff.html | 144 -- tiff/html/man/TIFFWriteRawTile.3tiff.html | 128 - tiff/html/man/TIFFWriteScanline.3tiff.html | 206 -- tiff/html/man/TIFFWriteTile.3tiff.html | 115 - tiff/html/man/TIFFbuffer.3tiff.html | 116 - tiff/html/man/TIFFcodec.3tiff.html | 116 - tiff/html/man/TIFFcolor.3tiff.html | 975 -------- tiff/html/man/TIFFmemory.3tiff.html | 110 - tiff/html/man/TIFFquery.3tiff.html | 148 -- tiff/html/man/TIFFsize.3tiff.html | 95 - tiff/html/man/TIFFstrip.3tiff.html | 129 - tiff/html/man/TIFFswab.3tiff.html | 110 - tiff/html/man/TIFFtile.3tiff.html | 141 -- tiff/html/man/fax2ps.1.html | 252 -- tiff/html/man/fax2tiff.1.html | 607 ----- tiff/html/man/gif2tiff.1.html | 141 -- tiff/html/man/index.html | 64 - tiff/html/man/libtiff.3tiff.html | 3137 ------------------------ tiff/html/man/pal2rgb.1.html | 189 -- tiff/html/man/ppm2tiff.1.html | 141 -- tiff/html/man/ras2tiff.1.html | 139 -- tiff/html/man/raw2tiff.1.html | 510 ---- tiff/html/man/rgb2ycbcr.1.html | 155 -- tiff/html/man/sgi2tiff.1.html | 147 -- tiff/html/man/thumbnail.1.html | 148 -- tiff/html/man/tiff2bw.1.html | 161 -- tiff/html/man/tiff2pdf.1.html | 609 ----- tiff/html/man/tiff2ps.1.html | 532 ---- tiff/html/man/tiff2rgba.1.html | 162 -- tiff/html/man/tiffcmp.1.html | 156 -- tiff/html/man/tiffcp.1.html | 536 ---- tiff/html/man/tiffcrop.1.html | 851 ------- tiff/html/man/tiffdither.1.html | 183 -- tiff/html/man/tiffdump.1.html | 145 -- tiff/html/man/tiffgt.1.html | 551 ----- tiff/html/man/tiffinfo.1.html | 196 -- tiff/html/man/tiffmedian.1.html | 183 -- tiff/html/man/tiffset.1.html | 176 -- tiff/html/man/tiffsplit.1.html | 102 - tiff/html/man/tiffsv.1.html | 207 -- 66 files changed, 20232 deletions(-) delete mode 100644 tiff/html/man/Makefile.am delete mode 100644 tiff/html/man/Makefile.in delete mode 100644 tiff/html/man/TIFFClose.3tiff.html delete mode 100644 tiff/html/man/TIFFDataWidth.3tiff.html delete mode 100644 tiff/html/man/TIFFError.3tiff.html delete mode 100644 tiff/html/man/TIFFFlush.3tiff.html delete mode 100644 tiff/html/man/TIFFGetField.3tiff.html delete mode 100644 tiff/html/man/TIFFOpen.3tiff.html delete mode 100644 tiff/html/man/TIFFPrintDirectory.3tiff.html delete mode 100644 tiff/html/man/TIFFRGBAImage.3tiff.html delete mode 100644 tiff/html/man/TIFFReadDirectory.3tiff.html delete mode 100644 tiff/html/man/TIFFReadEncodedStrip.3tiff.html delete mode 100644 tiff/html/man/TIFFReadEncodedTile.3tiff.html delete mode 100644 tiff/html/man/TIFFReadRGBAImage.3tiff.html delete mode 100644 tiff/html/man/TIFFReadRGBAStrip.3tiff.html delete mode 100644 tiff/html/man/TIFFReadRGBATile.3tiff.html delete mode 100644 tiff/html/man/TIFFReadRawStrip.3tiff.html delete mode 100644 tiff/html/man/TIFFReadRawTile.3tiff.html delete mode 100644 tiff/html/man/TIFFReadScanline.3tiff.html delete mode 100644 tiff/html/man/TIFFReadTile.3tiff.html delete mode 100644 tiff/html/man/TIFFSetDirectory.3tiff.html delete mode 100644 tiff/html/man/TIFFSetField.3tiff.html delete mode 100644 tiff/html/man/TIFFWarning.3tiff.html delete mode 100644 tiff/html/man/TIFFWriteDirectory.3tiff.html delete mode 100644 tiff/html/man/TIFFWriteEncodedStrip.3tiff.html delete mode 100644 tiff/html/man/TIFFWriteEncodedTile.3tiff.html delete mode 100644 tiff/html/man/TIFFWriteRawStrip.3tiff.html delete mode 100644 tiff/html/man/TIFFWriteRawTile.3tiff.html delete mode 100644 tiff/html/man/TIFFWriteScanline.3tiff.html delete mode 100644 tiff/html/man/TIFFWriteTile.3tiff.html delete mode 100644 tiff/html/man/TIFFbuffer.3tiff.html delete mode 100644 tiff/html/man/TIFFcodec.3tiff.html delete mode 100644 tiff/html/man/TIFFcolor.3tiff.html delete mode 100644 tiff/html/man/TIFFmemory.3tiff.html delete mode 100644 tiff/html/man/TIFFquery.3tiff.html delete mode 100644 tiff/html/man/TIFFsize.3tiff.html delete mode 100644 tiff/html/man/TIFFstrip.3tiff.html delete mode 100644 tiff/html/man/TIFFswab.3tiff.html delete mode 100644 tiff/html/man/TIFFtile.3tiff.html delete mode 100644 tiff/html/man/fax2ps.1.html delete mode 100644 tiff/html/man/fax2tiff.1.html delete mode 100644 tiff/html/man/gif2tiff.1.html delete mode 100644 tiff/html/man/index.html delete mode 100644 tiff/html/man/libtiff.3tiff.html delete mode 100644 tiff/html/man/pal2rgb.1.html delete mode 100644 tiff/html/man/ppm2tiff.1.html delete mode 100644 tiff/html/man/ras2tiff.1.html delete mode 100644 tiff/html/man/raw2tiff.1.html delete mode 100644 tiff/html/man/rgb2ycbcr.1.html delete mode 100644 tiff/html/man/sgi2tiff.1.html delete mode 100644 tiff/html/man/thumbnail.1.html delete mode 100644 tiff/html/man/tiff2bw.1.html delete mode 100644 tiff/html/man/tiff2pdf.1.html delete mode 100644 tiff/html/man/tiff2ps.1.html delete mode 100644 tiff/html/man/tiff2rgba.1.html delete mode 100644 tiff/html/man/tiffcmp.1.html delete mode 100644 tiff/html/man/tiffcp.1.html delete mode 100644 tiff/html/man/tiffcrop.1.html delete mode 100644 tiff/html/man/tiffdither.1.html delete mode 100644 tiff/html/man/tiffdump.1.html delete mode 100644 tiff/html/man/tiffgt.1.html delete mode 100644 tiff/html/man/tiffinfo.1.html delete mode 100644 tiff/html/man/tiffmedian.1.html delete mode 100644 tiff/html/man/tiffset.1.html delete mode 100644 tiff/html/man/tiffsplit.1.html delete mode 100644 tiff/html/man/tiffsv.1.html (limited to 'tiff/html/man') diff --git a/tiff/html/man/Makefile.am b/tiff/html/man/Makefile.am deleted file mode 100644 index c14c4db..0000000 --- a/tiff/html/man/Makefile.am +++ /dev/null @@ -1,119 +0,0 @@ -# Tag Image File Format (TIFF) Software -# -# Copyright (C) 2004, Andrey Kiselev -# -# Permission to use, copy, modify, distribute, and sell this software and -# its documentation for any purpose is hereby granted without fee, provided -# that (i) the above copyright notices and this permission notice appear in -# all copies of the software and related documentation, and (ii) the names of -# Sam Leffler and Silicon Graphics may not be used in any advertising or -# publicity relating to the software without the specific, prior written -# permission of Sam Leffler and Silicon Graphics. -# -# THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -# EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -# WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -# -# IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -# ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -# OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -# WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -# LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -# OF THIS SOFTWARE. - -# Process this file with automake to produce Makefile.in. - -docdir = $(LIBTIFF_DOCDIR)/html/man -MANSRCDIR = $(top_srcdir)/man -HTMLMANDIR = $(top_srcdir)/html/man - -GROFF = groff -Thtml -mandoc -ECHO = echo - -indexfile = index.html -docfiles = \ - libtiff.3tiff.html \ - TIFFbuffer.3tiff.html \ - TIFFClose.3tiff.html \ - TIFFcodec.3tiff.html \ - TIFFcolor.3tiff.html \ - TIFFDataWidth.3tiff.html \ - TIFFError.3tiff.html \ - TIFFFlush.3tiff.html \ - TIFFGetField.3tiff.html \ - TIFFmemory.3tiff.html \ - TIFFOpen.3tiff.html \ - TIFFPrintDirectory.3tiff.html \ - TIFFquery.3tiff.html \ - TIFFReadDirectory.3tiff.html \ - TIFFReadEncodedStrip.3tiff.html \ - TIFFReadEncodedTile.3tiff.html \ - TIFFReadRawStrip.3tiff.html \ - TIFFReadRawTile.3tiff.html \ - TIFFReadRGBAImage.3tiff.html \ - TIFFReadRGBAStrip.3tiff.html \ - TIFFReadRGBATile.3tiff.html \ - TIFFReadScanline.3tiff.html \ - TIFFReadTile.3tiff.html \ - TIFFRGBAImage.3tiff.html \ - TIFFSetDirectory.3tiff.html \ - TIFFSetField.3tiff.html \ - TIFFsize.3tiff.html \ - TIFFstrip.3tiff.html \ - TIFFswab.3tiff.html \ - TIFFtile.3tiff.html \ - TIFFWarning.3tiff.html \ - TIFFWriteDirectory.3tiff.html \ - TIFFWriteEncodedStrip.3tiff.html \ - TIFFWriteEncodedTile.3tiff.html \ - TIFFWriteRawStrip.3tiff.html \ - TIFFWriteRawTile.3tiff.html \ - TIFFWriteScanline.3tiff.html \ - TIFFWriteTile.3tiff.html \ - fax2ps.1.html \ - fax2tiff.1.html \ - gif2tiff.1.html \ - pal2rgb.1.html \ - ppm2tiff.1.html \ - ras2tiff.1.html \ - raw2tiff.1.html \ - rgb2ycbcr.1.html \ - sgi2tiff.1.html \ - thumbnail.1.html \ - tiff2bw.1.html \ - tiff2pdf.1.html \ - tiff2ps.1.html \ - tiff2rgba.1.html \ - tiffcmp.1.html \ - tiffcp.1.html \ - tiffcrop.1.html \ - tiffdither.1.html \ - tiffdump.1.html \ - tiffgt.1.html \ - tiffinfo.1.html \ - tiffmedian.1.html \ - tiffset.1.html \ - tiffsplit.1.html \ - tiffsv.1.html - -dist_doc_DATA = $(indexfile) $(docfiles) - -INDEXSTART = 'Libtiff HTML manpage index' - -.PHONY: index -index: - ${ECHO} ${INDEXSTART} > $(indexfile) - for i in $(docfiles); do \ - ${ECHO} '
  • '$$i'' >> $(indexfile); \ - done - ${ECHO} ${INDEXEND} >> $(indexfile) - -manpages = $(docfiles:.html=) - -.PHONY: htmldoc -htmldoc: - for i in $(manpages); do \ - ${GROFF} $(MANSRCDIR)/$$i > $(HTMLMANDIR)/$$i.html; \ - done - diff --git a/tiff/html/man/Makefile.in b/tiff/html/man/Makefile.in deleted file mode 100644 index 37d2c70..0000000 --- a/tiff/html/man/Makefile.in +++ /dev/null @@ -1,556 +0,0 @@ -# Makefile.in generated by automake 1.11 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, -# Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -# Tag Image File Format (TIFF) Software -# -# Copyright (C) 2004, Andrey Kiselev -# -# Permission to use, copy, modify, distribute, and sell this software and -# its documentation for any purpose is hereby granted without fee, provided -# that (i) the above copyright notices and this permission notice appear in -# all copies of the software and related documentation, and (ii) the names of -# Sam Leffler and Silicon Graphics may not be used in any advertising or -# publicity relating to the software without the specific, prior written -# permission of Sam Leffler and Silicon Graphics. -# -# THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, -# EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY -# WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -# -# IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR -# ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, -# OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -# WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF -# LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE -# OF THIS SOFTWARE. - -# Process this file with automake to produce Makefile.in. - -VPATH = @srcdir@ -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -target_triplet = @target@ -subdir = html/man -DIST_COMMON = $(dist_doc_DATA) $(srcdir)/Makefile.am \ - $(srcdir)/Makefile.in -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/acinclude.m4 \ - $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ - $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ - $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(SHELL) $(top_srcdir)/config/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/libtiff/tif_config.h \ - $(top_builddir)/libtiff/tiffconf.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -AM_V_GEN = $(am__v_GEN_$(V)) -am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) -am__v_GEN_0 = @echo " GEN " $@; -AM_V_at = $(am__v_at_$(V)) -am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) -am__v_at_0 = @ -SOURCES = -DIST_SOURCES = -am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; -am__vpath_adj = case $$p in \ - $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ - *) f=$$p;; \ - esac; -am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; -am__install_max = 40 -am__nobase_strip_setup = \ - srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` -am__nobase_strip = \ - for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" -am__nobase_list = $(am__nobase_strip_setup); \ - for p in $$list; do echo "$$p $$p"; done | \ - sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ - $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ - if (++n[$$2] == $(am__install_max)) \ - { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ - END { for (dir in files) print dir, files[dir] }' -am__base_list = \ - sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ - sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' -am__installdirs = "$(DESTDIR)$(docdir)" -DATA = $(dist_doc_DATA) -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -AS = @AS@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CXX = @CXX@ -CXXCPP = @CXXCPP@ -CXXDEPMODE = @CXXDEPMODE@ -CXXFLAGS = @CXXFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FGREP = @FGREP@ -GLUT_CFLAGS = @GLUT_CFLAGS@ -GLUT_LIBS = @GLUT_LIBS@ -GLU_CFLAGS = @GLU_CFLAGS@ -GLU_LIBS = @GLU_LIBS@ -GL_CFLAGS = @GL_CFLAGS@ -GL_LIBS = @GL_LIBS@ -GREP = @GREP@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBDIR = @LIBDIR@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTIFF_ALPHA_VERSION = @LIBTIFF_ALPHA_VERSION@ -LIBTIFF_DOCDIR = @LIBTIFF_DOCDIR@ -LIBTIFF_MAJOR_VERSION = @LIBTIFF_MAJOR_VERSION@ -LIBTIFF_MICRO_VERSION = @LIBTIFF_MICRO_VERSION@ -LIBTIFF_MINOR_VERSION = @LIBTIFF_MINOR_VERSION@ -LIBTIFF_RELEASE_DATE = @LIBTIFF_RELEASE_DATE@ -LIBTIFF_VERSION = @LIBTIFF_VERSION@ -LIBTIFF_VERSION_INFO = @LIBTIFF_VERSION_INFO@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -MAINT = @MAINT@ -MAKEINFO = @MAKEINFO@ -MKDIR_P = @MKDIR_P@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PTHREAD_CC = @PTHREAD_CC@ -PTHREAD_CFLAGS = @PTHREAD_CFLAGS@ -PTHREAD_LIBS = @PTHREAD_LIBS@ -RANLIB = @RANLIB@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -VERSION = @VERSION@ -XMKMF = @XMKMF@ -X_CFLAGS = @X_CFLAGS@ -X_EXTRA_LIBS = @X_EXTRA_LIBS@ -X_LIBS = @X_LIBS@ -X_PRE_LIBS = @X_PRE_LIBS@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_CXX = @ac_ct_CXX@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -acx_pthread_config = @acx_pthread_config@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = $(LIBTIFF_DOCDIR)/html/man -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target = @target@ -target_alias = @target_alias@ -target_cpu = @target_cpu@ -target_os = @target_os@ -target_vendor = @target_vendor@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -MANSRCDIR = $(top_srcdir)/man -HTMLMANDIR = $(top_srcdir)/html/man -GROFF = groff -Thtml -mandoc -ECHO = echo -indexfile = index.html -docfiles = \ - libtiff.3tiff.html \ - TIFFbuffer.3tiff.html \ - TIFFClose.3tiff.html \ - TIFFcodec.3tiff.html \ - TIFFcolor.3tiff.html \ - TIFFDataWidth.3tiff.html \ - TIFFError.3tiff.html \ - TIFFFlush.3tiff.html \ - TIFFGetField.3tiff.html \ - TIFFmemory.3tiff.html \ - TIFFOpen.3tiff.html \ - TIFFPrintDirectory.3tiff.html \ - TIFFquery.3tiff.html \ - TIFFReadDirectory.3tiff.html \ - TIFFReadEncodedStrip.3tiff.html \ - TIFFReadEncodedTile.3tiff.html \ - TIFFReadRawStrip.3tiff.html \ - TIFFReadRawTile.3tiff.html \ - TIFFReadRGBAImage.3tiff.html \ - TIFFReadRGBAStrip.3tiff.html \ - TIFFReadRGBATile.3tiff.html \ - TIFFReadScanline.3tiff.html \ - TIFFReadTile.3tiff.html \ - TIFFRGBAImage.3tiff.html \ - TIFFSetDirectory.3tiff.html \ - TIFFSetField.3tiff.html \ - TIFFsize.3tiff.html \ - TIFFstrip.3tiff.html \ - TIFFswab.3tiff.html \ - TIFFtile.3tiff.html \ - TIFFWarning.3tiff.html \ - TIFFWriteDirectory.3tiff.html \ - TIFFWriteEncodedStrip.3tiff.html \ - TIFFWriteEncodedTile.3tiff.html \ - TIFFWriteRawStrip.3tiff.html \ - TIFFWriteRawTile.3tiff.html \ - TIFFWriteScanline.3tiff.html \ - TIFFWriteTile.3tiff.html \ - fax2ps.1.html \ - fax2tiff.1.html \ - gif2tiff.1.html \ - pal2rgb.1.html \ - ppm2tiff.1.html \ - ras2tiff.1.html \ - raw2tiff.1.html \ - rgb2ycbcr.1.html \ - sgi2tiff.1.html \ - thumbnail.1.html \ - tiff2bw.1.html \ - tiff2pdf.1.html \ - tiff2ps.1.html \ - tiff2rgba.1.html \ - tiffcmp.1.html \ - tiffcp.1.html \ - tiffcrop.1.html \ - tiffdither.1.html \ - tiffdump.1.html \ - tiffgt.1.html \ - tiffinfo.1.html \ - tiffmedian.1.html \ - tiffset.1.html \ - tiffsplit.1.html \ - tiffsv.1.html - -dist_doc_DATA = $(indexfile) $(docfiles) -INDEXSTART = 'Libtiff HTML manpage index

      Man Pages

      ' -INDEXEND = '

    ' -manpages = $(docfiles:.html=) -all: all-am - -.SUFFIXES: -$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign html/man/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign html/man/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs -install-dist_docDATA: $(dist_doc_DATA) - @$(NORMAL_INSTALL) - test -z "$(docdir)" || $(MKDIR_P) "$(DESTDIR)$(docdir)" - @list='$(dist_doc_DATA)'; test -n "$(docdir)" || list=; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(docdir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(docdir)" || exit $$?; \ - done - -uninstall-dist_docDATA: - @$(NORMAL_UNINSTALL) - @list='$(dist_doc_DATA)'; test -n "$(docdir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - test -n "$$files" || exit 0; \ - echo " ( cd '$(DESTDIR)$(docdir)' && rm -f" $$files ")"; \ - cd "$(DESTDIR)$(docdir)" && rm -f $$files -tags: TAGS -TAGS: - -ctags: CTAGS -CTAGS: - - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-am -all-am: Makefile $(DATA) -installdirs: - for dir in "$(DESTDIR)$(docdir)"; do \ - test -z "$$dir" || $(MKDIR_P) "$$dir"; \ - done -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-libtool mostlyclean-am - -distclean: distclean-am - -rm -f Makefile -distclean-am: clean-am distclean-generic - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: install-dist_docDATA - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: uninstall-dist_docDATA - -.MAKE: install-am install-strip - -.PHONY: all all-am check check-am clean clean-generic clean-libtool \ - distclean distclean-generic distclean-libtool distdir dvi \ - dvi-am html html-am info info-am install install-am \ - install-data install-data-am install-dist_docDATA install-dvi \ - install-dvi-am install-exec install-exec-am install-html \ - install-html-am install-info install-info-am install-man \ - install-pdf install-pdf-am install-ps install-ps-am \ - install-strip installcheck installcheck-am installdirs \ - maintainer-clean maintainer-clean-generic mostlyclean \ - mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ - uninstall uninstall-am uninstall-dist_docDATA - - -.PHONY: index -index: - ${ECHO} ${INDEXSTART} > $(indexfile) - for i in $(docfiles); do \ - ${ECHO} '
  • '$$i'' >> $(indexfile); \ - done - ${ECHO} ${INDEXEND} >> $(indexfile) - -.PHONY: htmldoc -htmldoc: - for i in $(manpages); do \ - ${GROFF} $(MANSRCDIR)/$$i > $(HTMLMANDIR)/$$i.html; \ - done - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/tiff/html/man/TIFFClose.3tiff.html b/tiff/html/man/TIFFClose.3tiff.html deleted file mode 100644 index 42e3ba8..0000000 --- a/tiff/html/man/TIFFClose.3tiff.html +++ /dev/null @@ -1,87 +0,0 @@ - - - - - - -TIFFClose - - - -

    TIFFClose

    -NAME
    -SYNOPSIS
    -DESCRIPTION
    -DIAGNOSTICS
    -SEE ALSO
    - -
    - -

    NAME

    - - - - - -
    -

    TIFFClose − close a previously opened -TIFF file

    -
    - -

    SYNOPSIS

    - - - - - -
    -

    #include <tiffio.h>

    - -

    void TIFFClose(TIFF *tif)

    -
    - -

    DESCRIPTION

    - - - - - -
    -

    TIFFClose closes a file that was previously opened -with TIFFOpen(3TIFF). Any buffered data are flushed -to the file, including the contents of the current directory -(if modified); and all resources are reclaimed.

    -
    - -

    DIAGNOSTICS

    - - - - - -
    -

    All error messages are directed to the routine. Likewise, -warning messages are directed to the -TIFFWarning(3TIFF) routine.

    -
    - -

    SEE ALSO

    - - - - - -
    -

    libtiff(3TIFF), TIFFOpen(3TIFF)

    - -

    Libtiff library home page: -http://www.remotesensing.org/libtiff/

    -
    -
    - - diff --git a/tiff/html/man/TIFFDataWidth.3tiff.html b/tiff/html/man/TIFFDataWidth.3tiff.html deleted file mode 100644 index 237296e..0000000 --- a/tiff/html/man/TIFFDataWidth.3tiff.html +++ /dev/null @@ -1,98 +0,0 @@ - - - - - - -TIFFDataWidth - - - -

    TIFFDataWidth

    -NAME
    -SYNOPSIS
    -DESCRIPTION
    -RETURN VALUES
    -SEE ALSO
    - -
    - -

    NAME

    - - - - - -
    -

    TIFFDataWidth − Get the size of TIFF data types

    -
    - -

    SYNOPSIS

    - - - - - -
    -

    #include <tiffio.h>

    - -

    int TIFFDataWidth(TIFFDataType -type)

    -
    - -

    DESCRIPTION

    - - - - - -
    -

    TIFFDataWidth returns a size of type in -bytes. Currently following data types are supported:
    -TIFF_BYTE
    -TIFF_ASCII
    -TIFF_SBYTE
    -TIFF_UNDEFINED
    -TIFF_SHORT
    -TIFF_SSHORT
    -TIFF_LONG
    -TIFF_SLONG
    -TIFF_FLOAT
    -TIFF_IFD
    -TIFF_RATIONAL
    -TIFF_SRATIONAL
    -TIFF_DOUBLE

    -
    - -

    RETURN VALUES

    - - - - - -
    -

    TIFFDataWidth returns a number of bytes occupied -by the item of given type. 0 returned when uknown data type -supplied.

    -
    - -

    SEE ALSO

    - - - - - -
    -

    libtiff(3TIFF),

    - -

    Libtiff library home page: -http://www.remotesensing.org/libtiff/

    -
    -
    - - diff --git a/tiff/html/man/TIFFError.3tiff.html b/tiff/html/man/TIFFError.3tiff.html deleted file mode 100644 index 5d39a13..0000000 --- a/tiff/html/man/TIFFError.3tiff.html +++ /dev/null @@ -1,106 +0,0 @@ - - - - - - -TIFFError - - - -

    TIFFError

    -NAME
    -SYNOPSIS
    -DESCRIPTION
    -RETURN VALUES
    -SEE ALSO
    - -
    - -

    NAME

    - - - - - -
    -

    TIFFError, TIFFSetErrorHandler − library error -handling interface

    -
    - -

    SYNOPSIS

    - - - - - -
    -

    #include <tiffio.h>

    - -

    void TIFFError(const char *module, const -char *fmt, ...)

    - -

    #include <stdarg.h>

    - -

    typedef void (*TIFFErrorHandler)(const char -*module, const char *fmt, -va_list ap);
    -TIFFErrorHandler TIFFSetErrorHandler(TIFFErrorHandler -handler);

    -
    - -

    DESCRIPTION

    - - - - - -
    -

    TIFFError invokes the library-wide error handling -function to (normally) write an error message to the -stderr. The fmt parameter is a -printf(3S) format string, and any number arguments -can be supplied. The module parameter, if non-zero, -is printed before the message; it typically is used to -identify the software module in which an error is -detected.

    - -

    Applications that desire to capture control in the event -of an error should use TIFFSetErrorHandler to -override the default error handler. A NULL -(0) error handling function may be installed to suppress -error messages.

    -
    - -

    RETURN VALUES

    - - - - - -
    -

    TIFFSetErrorHandler returns a reference to the -previous error handling function.

    -
    - -

    SEE ALSO

    - - - - - -
    -

    TIFFWarning(3TIFF), libtiff(3TIFF), -printf(3)

    - -

    Libtiff library home page: -http://www.remotesensing.org/libtiff/

    -
    -
    - - diff --git a/tiff/html/man/TIFFFlush.3tiff.html b/tiff/html/man/TIFFFlush.3tiff.html deleted file mode 100644 index f32ccd3..0000000 --- a/tiff/html/man/TIFFFlush.3tiff.html +++ /dev/null @@ -1,113 +0,0 @@ - - - - - - -TIFFFlush - - - -

    TIFFFlush

    -NAME
    -SYNOPSIS
    -DESCRIPTION
    -RETURN VALUES
    -DIAGNOSTICS
    -SEE ALSO
    - -
    - -

    NAME

    - - - - - -
    -

    TIFFFlush, TIFFFlushData − flush pending writes to -an open TIFF file

    -
    - -

    SYNOPSIS

    - - - - - -
    -

    #include <tiffio.h>

    - -

    int TIFFFlush(TIFF *tif)
    -int TIFFFlushData(TIFF *    tif)

    -
    - -

    DESCRIPTION

    - - - - - -
    -

    TIFFFlush causes any pending writes for the -specified file (including writes for the current directory) -to be done. In normal operation this call is never needed -− the library automatically does any flushing -required.

    - -

    TIFFFlushData flushes any pending image data for -the specified file to be written out; directory-related data -are not flushed. In normal operation this call is never -needed − the library automatically does any flushing -required.

    -
    - -

    RETURN VALUES

    - - - - - -
    -

    0 is returned if an error is encountered, otherwise 1 is -returned.

    -
    - -

    DIAGNOSTICS

    - - - - - -
    -

    All error messages are directed to the -TIFFError(3TIFF) routine.

    -
    - -

    SEE ALSO

    - - - - - -
    -

    TIFFOpen(3TIFF), -TIFFWriteEncodedStrip(3TIFF), -TIFFWriteEncodedTile(3TIFF), -TIFFWriteRawStrip(3TIFF), -TIFFWriteRawTile(3TIFF), -TIFFWriteScanline(3TIFF), TIFFWriteTile(3TIFF) -libtiff(3TIFF),

    - -

    Libtiff library home page: -http://www.remotesensing.org/libtiff/

    -
    -
    - - diff --git a/tiff/html/man/TIFFGetField.3tiff.html b/tiff/html/man/TIFFGetField.3tiff.html deleted file mode 100644 index e644b1d..0000000 --- a/tiff/html/man/TIFFGetField.3tiff.html +++ /dev/null @@ -1,1446 +0,0 @@ - - - - - - -TIFFGetField - - - -

    TIFFGetField

    -NAME
    -SYNOPSIS
    -DESCRIPTION
    -AUTOREGISTERED TAGS
    -RETURN VALUES
    -DIAGNOSTICS
    -SEE ALSO
    - -
    - -

    NAME

    - - - - - -
    -

    TIFFGetField, TIFFVGetField − get the value(s) of a -tag in an open TIFF file

    -
    - -

    SYNOPSIS

    - - - - - -
    -

    #include <tiffio.h>

    - -

    int TIFFGetField(TIFF *tif, ttag_t -tag, ...)

    - -

    #include <stdarg.h>

    - -

    int TIFFVGetField(TIFF *tif, ttag_t -tag, va_list ap)
    -int TIFFGetFieldDefaulted(TIFF *    tif, -ttag_t tag, ...)
    -int TIFFVGetFieldDefaulted(TIFF *    tif, -ttag_t tag, va_list ap)

    -
    - -

    DESCRIPTION

    - - - - - -
    -

    TIFFGetField returns the value of a tag or -pseudo-tag associated with the the current directory of the -opened TIFF file tif. (A -pseudo-tag is a parameter that is used to control the -operation of the TIFF library but whose value -is not read or written to the underlying file.) The file -must have been previously opened with -TIFFOpen(3TIFF). The tag is identified by tag, -one of the values defined in the include file tiff.h -(see also the table below). The type and number of values -returned is dependent on the tag being requested. The -programming interface uses a variable argument list as -prescribed by the stdarg(3) interface. The returned -values should only be interpreted if TIFFGetField -returns 1.

    - -

    TIFFVGetField is functionally equivalent to -TIFFGetField except that it takes a pointer to a -variable argument list. TIFFVGetField is useful for -layering interfaces on top of the functionality provided by -TIFFGetField.

    - -

    TIFFGetFieldDefaulted and -TIFFVGetFieldDefaulted are identical to -TIFFGetField and TIFFVGetField, except that if -a tag is not defined in the current directory and it has a -default value, then the default value is returned.

    - -

    The tags understood by libtiff(3TIFF), the number -of parameter values, and the types for the returned values -are shown below. The data types are specified as in C and -correspond to the types used to specify tag values to -TIFFSetField(3TIFF). Remember that -TIFFGetField returns parameter values, so all the -listed data types are pointers to storage where values -should be returned. Consult the TIFF -specification (or relevant industry specification) for -information on the meaning of each tag and their possible -values.

    - - -

    Tag Name Count Types Notes

    - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
    - -

    TIFFTAG_ARTIST

    -    		 - -

    1

    -    		 - -

    char**

    -    		 -
    - -

    TIFFTAG_BADFAXLINES

    -    		 - -

    1

    -    		 - -

    uint32*

    -    		 -
    - -

    TIFFTAG_BITSPERSAMPLE

    -    		 - -

    1

    -    		 - -

    uint16*

    -    		 -
    - -

    TIFFTAG_CLEANFAXDATA

    -    		 - -

    1

    -    		 - -

    uint16*

    -    		 -
    - -

    TIFFTAG_COLORMAP

    -    		 - -

    3

    -    		 - -

    uint16**

    -    		 - -

    1<<BitsPerSample arrays

    -
    - -

    TIFFTAG_COMPRESSION

    -    		 - -

    1

    -    		 - -

    uint16*

    -    		 -
    - -

    TIFFTAG_CONSECUTIVEBADFAXLINES

    -    		 - -

    1

    -    		 - -

    uint32*

    -    		 -
    - -

    TIFFTAG_COPYRIGHT

    -    		 - -

    1

    -    		 - -

    char**

    -    		 -
    - -

    TIFFTAG_DATATYPE

    -    		 - -

    1

    -    		 - -

    uint16*

    -    		 -
    - -

    TIFFTAG_DATETIME

    -    		 - -

    1

    -    		 - -

    char**

    -    		 -
    - -

    TIFFTAG_DOCUMENTNAME

    -    		 - -

    1

    -    		 - -

    char**

    -    		 -
    - -

    TIFFTAG_DOTRANGE

    -    		 - -

    2

    -    		 - -

    uint16*

    -    		 -
    - -

    TIFFTAG_EXTRASAMPLES

    -    		 - -

    2

    -    		 - -

    uint16*,uint16**

    -    		 - -

    count & types array

    -
    - -

    TIFFTAG_FAXFILLFUNC

    -    		 - -

    1

    -    		 - -

    TIFFFaxFillFunc*

    -    		 - -

    G3/G4 compression pseudo-tag

    -
    - -

    TIFFTAG_FAXMODE

    -    		 - -

    1

    -    		 - -

    int*

    -    		 - -

    G3/G4 compression pseudo-tag

    -
    - -

    TIFFTAG_FILLORDER

    -    		 - -

    1

    -    		 - -

    uint16*

    -    		 -
    - -

    TIFFTAG_GROUP3OPTIONS

    -    		 - -

    1

    -    		 - -

    uint32*

    -    		 -
    - -

    TIFFTAG_GROUP4OPTIONS

    -    		 - -

    1

    -    		 - -

    uint32*

    -    		 -
    - -

    TIFFTAG_HALFTONEHINTS

    -    		 - -

    2

    -    		 - -

    uint16*

    -    		 -
    - -

    TIFFTAG_HOSTCOMPUTER

    -    		 - -

    1

    -    		 - -

    char**

    -    		 -
    - -

    TIFFTAG_ICCPROFILE

    -    		 - -

    2

    -    		 - -

    uint32*,void**

    -    		 - -

    count, profile data

    -
    - -

    TIFFTAG_IMAGEDEPTH

    -    		 - -

    1

    -    		 - -

    uint32*

    -    		 -
    - -

    TIFFTAG_IMAGEDESCRIPTION

    -    		 - -

    1

    -    		 - -

    char**

    -    		 -
    - -

    TIFFTAG_IMAGELENGTH

    -    		 - -

    1

    -    		 - -

    uint32*

    -    		 -
    - -

    TIFFTAG_IMAGEWIDTH

    -    		 - -

    1

    -    		 - -

    uint32*

    -    		 -
    - -

    TIFFTAG_INKNAMES

    -    		 - -

    1

    -    		 - -

    char**

    -    		 -
    - -

    TIFFTAG_INKSET

    -    		 - -

    1

    -    		 - -

    uint16*

    -    		 -
    - -

    TIFFTAG_JPEGCOLORMODE

    -    		 - -

    1

    -    		 - -

    int*

    -    		 - -

    JPEG pseudo-tag

    -
    - -

    TIFFTAG_JPEGQUALITY

    -    		 - -

    1

    -    		 - -

    int*

    -    		 - -

    JPEG pseudo-tag

    -
    - -

    TIFFTAG_JPEGTABLES

    -    		 - -

    2

    -    		 - -

    uint32*,void**

    -    		 - -

    count & tables

    -
    - -

    TIFFTAG_JPEGTABLESMODE

    -    		 - -

    1

    -    		 - -

    int*

    -    		 - -

    JPEG pseudo-tag

    -
    - -

    TIFFTAG_MAKE

    -    		 - -

    1

    -    		 - -

    char**

    -    		 -
    - -

    TIFFTAG_MATTEING

    -    		 - -

    1

    -    		 - -

    uint16*

    -    		 -
    - -

    TIFFTAG_MAXSAMPLEVALUE

    -    		 - -

    1

    -    		 - -

    uint16*

    -    		 -
    - -

    TIFFTAG_MINSAMPLEVALUE

    -    		 - -

    1

    -    		 - -

    uint16*

    -    		 -
    - -

    TIFFTAG_MODEL

    -    		 - -

    1

    -    		 - -

    char**

    -    		 -
    - -

    TIFFTAG_ORIENTATION

    -    		 - -

    1

    -    		 - -

    uint16*

    -    		 -
    - -

    TIFFTAG_PAGENAME

    -    		 - -

    1

    -    		 - -

    char**

    -    		 -
    - -

    TIFFTAG_PAGENUMBER

    -    		 - -

    2

    -    		 - -

    uint16*

    -    		 -
    - -

    TIFFTAG_PHOTOMETRIC

    -    		 - -

    1

    -    		 - -

    uint16*

    -    		 -
    - -

    TIFFTAG_PHOTOSHOP

    -    		 - -

    2

    -    		 - -

    uint32*,void**

    -    		 - -

    count, data

    -
    - -

    TIFFTAG_PLANARCONFIG

    -    		 - -

    1

    -    		 - -

    uint16*

    -    		 -
    - -

    TIFFTAG_PREDICTOR

    -    		 - -

    1

    -    		 - -

    uint16*

    -    		 -
    - -

    TIFFTAG_PRIMARYCHROMATICITIES

    -    		 - -

    1

    -    		 - -

    float**

    -    		 - -

    6-entry array

    -
    - -

    TIFFTAG_REFERENCEBLACKWHITE

    -    		 - -

    1

    -    		 - -

    float**

    -    		 - -

    2*SamplesPerPixel array

    -
    - -

    TIFFTAG_RESOLUTIONUNIT

    -    		 - -

    1

    -    		 - -

    uint16*

    -    		 -
    - -

    TIFFTAG_RICHTIFFIPTC

    -    		 - -

    2

    -    		 - -

    uint32*,void**

    -    		 - -

    count, data

    -
    - -

    TIFFTAG_ROWSPERSTRIP

    -    		 - -

    1

    -    		 - -

    uint32*

    -    		 -
    - -

    TIFFTAG_SAMPLEFORMAT

    -    		 - -

    1

    -    		 - -

    uint16*

    -    		 -
    - -

    TIFFTAG_SAMPLESPERPIXEL

    -    		 - -

    1

    -    		 - -

    uint16*

    -    		 -
    - -

    TIFFTAG_SMAXSAMPLEVALUE

    -    		 - -

    1

    -    		 - -

    double*

    -    		 -
    - -

    TIFFTAG_SMINSAMPLEVALUE

    -    		 - -

    1

    -    		 - -

    double*

    -    		 -
    - -

    TIFFTAG_SOFTWARE

    -    		 - -

    1

    -    		 - -

    char**

    -    		 -
    - -

    TIFFTAG_STONITS

    -    		 - -

    1

    -    		 - -

    double**

    -    		 -
    - -

    TIFFTAG_STRIPBYTECOUNTS

    -    		 - -

    1

    -    		 - -

    uint32**

    -    		 -
    - -

    TIFFTAG_STRIPOFFSETS

    -    		 - -

    1

    -    		 - -

    uint32**

    -    		 -
    - -

    TIFFTAG_SUBFILETYPE

    -    		 - -

    1

    -    		 - -

    uint32*

    -    		 -
    - -

    TIFFTAG_SUBIFD

    -    		 - -

    2

    -    		 - -

    uint16*,uint32**

    -    		 - -

    count & offsets array

    -
    - -

    TIFFTAG_TARGETPRINTER

    -    		 - -

    1

    -    		 - -

    char**

    -    		 -
    - -

    TIFFTAG_THRESHHOLDING

    -    		 - -

    1

    -    		 - -

    uint16*

    -    		 -
    - -

    TIFFTAG_TILEBYTECOUNTS

    -    		 - -

    1

    -    		 - -

    uint32**

    -    		 -
    - -

    TIFFTAG_TILEDEPTH

    -    		 - -

    1

    -    		 - -

    uint32*

    -    		 -
    - -

    TIFFTAG_TILELENGTH

    -    		 - -

    1

    -    		 - -

    uint32*

    -    		 -
    - -

    TIFFTAG_TILEOFFSETS

    -    		 - -

    1

    -    		 - -

    uint32**

    -    		 -
    - -

    TIFFTAG_TILEWIDTH

    -    		 - -

    1

    -    		 - -

    uint32*

    -    		 -
    - -

    TIFFTAG_TRANSFERFUNCTION

    -    		 - -

    1 or 3†

    -    		 - -

    uint16**1<<BitsPerSample entry arrays

    -
    - -

    TIFFTAG_WHITEPOINT

    -    		 - -

    1

    -    		 - -

    float**

    -    		 - -

    2-entry array

    -
    - -

    TIFFTAG_XMLPACKET

    -    		 - -

    2

    -    		 - -

    uint32*,void**

    -    		 - -

    count, data

    -
    - -

    TIFFTAG_XPOSITION

    -    		 - -

    1

    -    		 - -

    float*

    -    		 -
    - -

    TIFFTAG_XRESOLUTION

    -    		 - -

    1

    -    		 - -

    float*

    -    		 -
    - -

    TIFFTAG_YCBCRCOEFFICIENTS

    -    		 - -

    1

    -    		 - -

    float**

    -    		 - -

    3-entry array

    -
    - -

    TIFFTAG_YCBCRPOSITIONING

    -    		 - -

    1

    -    		 - -

    uint16*

    -    		 -
    - -

    TIFFTAG_YCBCRSUBSAMPLING

    -    		 - -

    2

    -    		 - -

    uint16*

    -    		 -
    - -

    TIFFTAG_YPOSITION

    -    		 - -

    1

    -    		 - -

    float*

    -    		 -
    - -

    TIFFTAG_YRESOLUTION

    -    		 - -

    1

    -    		 - -

    float*‡

    -    		 -
    - - - - - -
    -

    † If SamplesPerPixel is one, then a single -array is returned; otherwise three arrays are returned.
    -‡ The contents of this field are quite complex. See -The ICC Profile Format Specification, Annex B.3 -"Embedding ICC Profiles in TIFF Files" (available -at http://www.color.org) for an explanation.

    -
    - -

    AUTOREGISTERED TAGS

    - - - - - -
    -

    If you can’t find the tag in the table above that -means this is unsupported tag. But you still be able to read -it’s value if you know the data type of that tag. For -example, if you want to read the LONG value from the tag -33424 and ASCII string from the tag 36867 you can use the -following code:

    -
    - - - - - -
    -
    uint16  count;
-void    *data;
-
-TIFFGetField(tiff, 33424, &count, &data);
-printf("Tag %d: %d, count %d0, 33424, *(uint32 *)data, count);
-TIFFGetField(tiff, 36867, &count, &data);
-printf("Tag %d: %s, count %d0, 36867, (char *)data, count);
-
    -
    - - - - - - -
    -

    is not supported by libtiff(3TIFF), library

    -
    - -

    RETURN VALUES

    - - - - - -
    -

    1 is returned if the tag is defined in the current -directory; otherwise a 0 is returned.

    -
    - -

    DIAGNOSTICS

    - - - - - -
    -

    All error messages are directed to the -TIFFError(3TIFF) routine.

    - -

    Unknown field, tag 0x%x. An unknown tag was -supplied.

    -
    - -

    SEE ALSO

    - - - - - -
    -

    TIFFOpen(3TIFF), TIFFSetField(3TIFF), -TIFFSetDirectory(3TIFF), -TIFFReadDirectory(3TIFF), -TIFFWriteDirectory(3TIFF) libtiff(3TIFF),

    - -

    Libtiff library home page: -http://www.remotesensing.org/libtiff/

    -
    -
    - - diff --git a/tiff/html/man/TIFFOpen.3tiff.html b/tiff/html/man/TIFFOpen.3tiff.html deleted file mode 100644 index 6bc85d8..0000000 --- a/tiff/html/man/TIFFOpen.3tiff.html +++ /dev/null @@ -1,421 +0,0 @@ - - - - - - -TIFFOpen - - - -

    TIFFOpen

    -NAME
    -SYNOPSIS
    -DESCRIPTION
    -OPTIONS
    -BYTE ORDER
    -RETURN VALUES
    -DIAGNOSTICS
    -SEE ALSO
    - -
    - -

    NAME

    - - - - - -
    -

    TIFFOpen, TIFFFdOpen, TIFFClientOpen − open a -TIFF file for reading or writing

    -
    - -

    SYNOPSIS

    - - - - - -
    -

    #include <tiffio.h>

    - -

    TIFF* TIFFOpen(const char *filename, -const char *mode)
    -TIFF* TIFFFdOpen(const int     fd, const char -*filename, const char -*mode)

    - -

    typedef tsize_t (*TIFFReadWriteProc)(thandle_t, -tdata_t, tsize_t);
    -typedef toff_t (*TIFFSeekProc)(thandle_t, toff_t, int);
    -typedef int (*TIFFCloseProc)(thandle_t);
    -typedef toff_t (*TIFFSizeProc)(thandle_t);
    -typedef int (*TIFFMapFileProc)(thandle_t, tdata_t*, -toff_t*);
    -typedef void (*TIFFUnmapFileProc)(thandle_t, tdata_t, -toff_t);

    - -

    TIFF* TIFFClientOpen(const char -*filename, const char *mode, -thandle_t clientdata, TIFFReadWriteProc -readproc, TIFFReadWriteProc -writeproc, TIFFSeekProc seekproc, -TIFFCloseProc closeproc, TIFFSizeProc -sizeproc, TIFFMapFileProc mapproc, -TIFFUnmapFileProc unmapproc)

    -
    - -

    DESCRIPTION

    - - - - - -
    -

    TIFFOpen opens a TIFF file whose -name is filename and returns a handle to be used in -subsequent calls to routines in libtiff. If the open -operation fails, then zero is returned. The mode -parameter specifies if the file is to be opened for reading -(‘‘r’’), writing -(‘‘w’’), or appending -(‘‘a’’) and, optionally, whether to -override certain default aspects of library operation (see -below). When a file is opened for appending, existing data -will not be touched; instead new data will be written as -additional subfiles. If an existing file is opened for -writing, all previous data is overwritten.

    - -

    If a file is opened for reading, the first -TIFF directory in the file is automatically -read (also see TIFFSetDirectory(3TIFF) for reading -directories other than the first). If a file is opened for -writing or appending, a default directory is automatically -created for writing subsequent data. This directory has all -the default values specified in TIFF Revision -6.0: BitsPerSample=1, ThreshHolding=bilevel -art scan, FillOrder=1 (most significant bit of each -data byte is filled first), Orientation=1 (the 0th -row represents the visual top of the image, and the 0th -column represents the visual left hand side), -SamplesPerPixel=1, RowsPerStrip=infinity, -ResolutionUnit=2 (inches), and Compression=1 -(no compression). To alter these values, or to define values -for additional fields, TIFFSetField(3TIFF) must be -used.

    - -

    TIFFFdOpen is like TIFFOpen except that it -opens a TIFF file given an open file -descriptor fd. The file’s name and mode must -reflect that of the open descriptor. The object associated -with the file descriptor must support random -access.

    - -

    TIFFClientOpen is like TIFFOpen except that -the caller supplies a collection of functions that the -library will use to do UNIX -like I/O -operations. The readproc and writeproc are -called to read and write data at the current file position. -seekproc is called to change the current file -position a la lseek(2). closeproc is invoked -to release any resources associated with an open file. -sizeproc is invoked to obtain the size in bytes of a -file. mapproc and unmapproc are called to map -and unmap a file’s contents in memory; c.f. -mmap(2) and munmap(2). The clientdata -parameter is an opaque ‘‘handle’’ -passed to the client-specified routines passed as parameters -to TIFFClientOpen.

    -
    - -

    OPTIONS

    - - - - - -
    -

    The open mode parameter can include the following flags -in addition to the ‘‘r’’, -‘‘w’’, and -‘‘a’’ flags. Note however that -option flags must follow the read-write-append -specification.

    -
    - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
    - -

    l

    -    		 - -

    When creating a new file force information be written -with Little-Endian byte order (but see below). By default -the library will create new files using the native -CPU byte order.

    -    		 -
    - -

    b

    -    		 - -

    When creating a new file force information be written -with Big-Endian byte order (but see below). By default the -library will create new files using the native -CPU byte order.

    -    		 -
    - -

    L

    -    		 - -

    Force image data that is read or written to be treated -with bits filled from Least Significant Bit ( -LSB ) to Most Significant Bit ( -MSB ). Note that this is the opposite to the -way the library has worked from its inception.

    -    		 -
    - -

    B

    -    		 - -

    Force image data that is read or written to be treated -with bits filled from Most Significant Bit ( -MSB ) to Least Significant Bit ( -LSB ); this is the default.

    -    		 -
    - -

    H

    -    		 - -

    Force image data that is read or written to be treated -with bits filled in the same order as the native -CPU.

    -    		 -
    - -

    M

    -    		 - -

    Enable the use of memory-mapped files for images opened -read-only. If the underlying system does not support -memory-mapped files or if the specific image being opened -cannot be memory-mapped then the library will fallback to -using the normal system interface for reading information. -By default the library will attempt to use memory-mapped -files.

    -    		 -
    - -

    m

    -    		 - -

    Disable the use of memory-mapped files.

    -    		 -
    - -

    C

    -    		 - -

    Enable the use of ‘‘strip -chopping’’ when reading images that are -comprised of a single strip or tile of uncompressed data. -Strip chopping is a mechanism by which the library will -automatically convert the single-strip image to multiple -strips, each of which has about 8 Kilobytes of data. This -facility can be useful in reducing the amount of memory used -to read an image because the library normally reads each -strip in its entirety. Strip chopping does however alter the -apparent contents of the image because when an image is -divided into multiple strips it looks as though the -underlying file contains multiple separate strips. Finally, -note that default handling of strip chopping is a -compile-time configuration parameter. The default behaviour, -for backwards compatibility, is to enable strip -chopping.

    -    		 -
    - -

    c

    -    		 - -

    Disable the use of strip chopping when reading -images.

    -    		 -
    - -

    h

    -    		 - -

    Read TIFF header only, do not load the first image -directory. That could be useful in case of the broken first -directory. We can open the file and proceed to the other -directories.

    -    		 -
    - -

    BYTE ORDER

    - - - - - -
    -

    The TIFF specification (all -versions) states that compliant readers must be -capable of reading images written in either byte order. -Nonetheless some software that claims to support the reading -of TIFF images is incapable of reading images -in anything but the native CPU byte order on -which the software was written. (Especially notorious are -applications written to run on Intel-based machines.) By -default the library will create new files with the native -byte-order of the CPU on which the -application is run. This ensures optimal performance and is -portable to any application that conforms to the TIFF -specification. To force the library to use a specific -byte-order when creating a new file the -‘‘b’’ and -‘‘l’’ option flags may be included -in the call to open a file; for example, -‘‘wb’’ or -‘‘wl’’.

    -
    - -

    RETURN VALUES

    - - - - - -
    -

    Upon successful completion TIFFOpen, -TIFFFdOpen, and TIFFClientOpen return a -TIFF pointer. Otherwise, NULL is -returned.

    -
    - -

    DIAGNOSTICS

    - - - - - -
    -

    All error messages are directed to the -TIFFError(3TIFF) routine. Likewise, warning messages -are directed to the TIFFWarning(3TIFF) routine.

    - -

    "%s": Bad mode. The specified -mode parameter was not one of -‘‘r’’ (read), -‘‘w’’ (write), or -‘‘a’’ (append).

    - -

    %s: Cannot open. TIFFOpen() was unable to -open the specified filename for read/writing.

    - -

    Cannot read TIFF header. An error occurred while -attempting to read the header information.

    - -

    Error writing TIFF header. An error occurred while -writing the default header information for a new file.

    - -

    Not a TIFF file, bad magic number %d (0x%x). The -magic number in the header was not (hex) 0x4d4d or (hex) -0x4949.

    - -

    Not a TIFF file, bad version number %d (0x%x). The -version field in the header was not 42 (decimal).

    - -

    Cannot append to file that has opposite byte -ordering. A file with a byte ordering opposite to the -native byte ordering of the current machine was opened for -appending (‘‘a’’). This is a -limitation of the library.

    -
    - -

    SEE ALSO

    - - - - - -
    -

    libtiff(3TIFF), TIFFClose(3TIFF)

    -
    -
    - - diff --git a/tiff/html/man/TIFFPrintDirectory.3tiff.html b/tiff/html/man/TIFFPrintDirectory.3tiff.html deleted file mode 100644 index a5f418a..0000000 --- a/tiff/html/man/TIFFPrintDirectory.3tiff.html +++ /dev/null @@ -1,225 +0,0 @@ - - - - - - -TIFFPrintDirectory - - - -

    TIFFPrintDirectory

    -NAME
    -SYNOPSIS
    -DESCRIPTION
    -NOTES
    -RETURN VALUES
    -DIAGNOSTICS
    -SEE ALSO
    - -
    - -

    NAME

    - - - - - -
    -

    TIFFPrintDirectory − print a description of a -TIFF directory

    -
    - -

    SYNOPSIS

    - - - - - -
    -

    #include <tiffio.h>

    - -

    void TIFFPrintDirectory(TIFF *tif, FILE -*fd, long flags)

    -
    - -

    DESCRIPTION

    - - - - - -
    -

    TIFFPrintDirectory prints a description of the -current directory in the specified TIFF file -to the standard I/O output stream fd. The -flags parameter is used to control the level of -detail of the printed information; it is a bit-or of the -flags defined in tiffio.h:

    - - -

    #define TIFFPRINT_NONE 0x0 /* no extra info */

    - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
    - -

    #define

    -    		 - -

    TIFFPRINT_STRIPS

    -    		 - -

    0x1

    -    		 - -

    /* strips/tiles info */

    -
    - -

    #define

    -    		 - -

    TIFFPRINT_CURVES

    -    		 - -

    0x2

    -    		 - -

    /* color/gray response curves */

    -
    - -

    #define

    -    		 - -

    TIFFPRINT_COLORMAP

    -    		 - -

    0x4

    -    		 - -

    /* colormap */

    -
    - -

    #define

    -    		 - -

    TIFFPRINT_JPEGQTABLES

    -    		 - -

    0x100

    -    		 - -

    /* JPEG Q matrices */

    -
    - -

    #define

    -    		 - -

    TIFFPRINT_JPEGACTABLES

    -    		 - -

    0x200

    -    		 - -

    /* JPEG AC tables */

    -
    - -

    #define

    -    		 - -

    TIFFPRINT_JPEGDCTABLES

    -    		 - -

    0x200

    -    		 - -

    /* JPEG DC tables */

    -
    - -

    NOTES

    - - - - - -
    -

    In C++ the flags parameter defaults to 0.

    -
    - -

    RETURN VALUES

    - - - - - -
    -

    None.

    -
    - -

    DIAGNOSTICS

    - - - - - -
    -

    None.

    -
    - -

    SEE ALSO

    - - - - - -
    -

    libtiff(3TIFF), TIFFOpen(3TIFF), -TIFFReadDirectory(3TIFF), -TIFFSetDirectory(3TIFF)

    -
    -
    - - diff --git a/tiff/html/man/TIFFRGBAImage.3tiff.html b/tiff/html/man/TIFFRGBAImage.3tiff.html deleted file mode 100644 index 7bbee0f..0000000 --- a/tiff/html/man/TIFFRGBAImage.3tiff.html +++ /dev/null @@ -1,319 +0,0 @@ - - - - - - -TIFFRGBAImage - - - -

    TIFFRGBAImage

    -NAME
    -SYNOPSIS
    -DESCRIPTION
    -ALTERNATE RASTER FORMATS
    -SIMULTANEOUS RASTER STORE AND DISPLAY
    -SUPPORTING ADDITIONAL TIFF FORMATS
    -NOTES
    -RETURN VALUES
    -DIAGNOSTICS
    -SEE ALSO
    - -
    - -

    NAME

    - - - - - -
    -

    TIFFRGBAImageOK, TIFFRGBAImageBegin, TIFFRGBAImageGet, -TIFFRGBAImageEnd − read and decode an image into a -raster

    -
    - -

    SYNOPSIS

    - - - - - -
    -

    #include <tiffio.h>

    - -

    typedef unsigned char TIFFRGBValue; typedef struct -_TIFFRGBAImage TIFFRGBAImage;

    - -

    int TIFFRGBAImageOK(TIFF *tif, char -emsg[1024])
    -int TIFFRGBAImageBegin(TIFFRGBAImage *    img, -TIFF* tif, int stopOnError, -char emsg[1024])
    -int TIFFRGBAImageGet(TIFFRGBAImage *    img, -uint32* raster, uint32 width , -uint32 height)
    -void TIFFRGBAImageEnd(TIFFRGBAImage -*    img)

    -
    - -

    DESCRIPTION

    - - - - - -
    -

    The routines described here provide a high-level -interface through which TIFF images may be -read into memory. Images may be strip- or tile-based and -have a variety of different characteristics: bits/sample, -samples/pixel, photometric, etc. Decoding state is -encapsulated in a TIFFRGBAImage structure making it -possible to capture state for multiple images and quickly -switch between them. The target raster format can be -customized to a particular application’s needs by -installing custom routines that manipulate image data -according to application requirements.

    - -

    The default usage for these routines is: check if an -image can be processed using TIFFRGBAImageOK, -construct a decoder state block using -TIFFRGBAImageBegin, read and decode an image into a -target raster using TIFFRGBAImageGet, and then -release resources using TIFFRGBAImageEnd. -TIFFRGBAImageGet can be called multiple times to -decode an image using different state parameters. If -multiple images are to be displayed and there is not enough -space for each of the decoded rasters, multiple state blocks -can be managed and then calls can be made to -TIFFRGBAImageGet as needed to display an image.

    - -

    The generated raster is assumed to be an array of -width times height 32-bit entries, where -width must be less than or equal to the width of the -image (height may be any non-zero size). If the -raster dimensions are smaller than the image, the image data -is cropped to the raster bounds. If the raster height is -greater than that of the image, then the image data are -placed in the lower part of the raster. (Note that the -raster is assume to be organized such that the pixel at -location (x,y) is -raster[y*width+x]; with the -raster origin in the lower-left hand corner.)

    - -

    Raster pixels are 8-bit packed red, green, blue, alpha -samples. The macros TIFFGetR, TIFFGetG, -TIFFGetB, and TIFFGetA should be used to -access individual samples. Images without Associated Alpha -matting information have a constant Alpha of 1.0 (255).

    - -

    TIFFRGBAImageGet converts non-8-bit images by -scaling sample values. Palette, grayscale, bilevel, -CMYK , and YCbCr images are converted to -RGB transparently. Raster pixels are returned -uncorrected by any colorimetry information present in the -directory.

    - -

    The parameter stopOnError specifies how to act if -an error is encountered while reading the image. If -stopOnError is non-zero, then an error will terminate -the operation; otherwise TIFFRGBAImageGet will -continue processing data until all the possible data in the -image have been requested.

    -
    - -

    ALTERNATE RASTER FORMATS

    - - - - - -
    -

    To use the core support for reading and processing -TIFF images, but write the resulting raster -data in a different format one need only override the -‘‘put methods’’ used to store -raster data. These methods are are defined in the -TIFFRGBAImage structure and initially setup by -TIFFRGBAImageBegin to point to routines that pack -raster data in the default ABGR pixel format. -Two different routines are used according to the physical -organization of the image data in the file: -PlanarConfiguration=1 (packed samples), and -PlanarConfiguration=2 (separated samples). Note that -this mechanism can be used to transform the data before -storing it in the raster. For example one can convert data -to colormap indices for display on a colormap display.

    -
    - -

    SIMULTANEOUS RASTER STORE AND DISPLAY

    - - - - - -
    -

    It is simple to display an image as it is being read into -memory by overriding the put methods as described above for -supporting alternate raster formats. Simply keep a reference -to the default put methods setup by -TIFFRGBAImageBegin and then invoke them before or -after each display operation. For example, the -tiffgt(1) utility uses the following put method to -update the display as the raster is being filled:

    - -
    static void
-putContigAndDraw(TIFFRGBAImage* img, uint32* raster,
-    uint32 x, uint32 y, uint32 w, uint32 h,
-    int32 fromskew, int32 toskew,
-    unsigned char* cp)
-{
-    (*putContig)(img, raster, x, y, w, h, fromskew, toskew, cp);
-    if (x+w == width) {
-     w = width;
-     if (img->orientation == ORIENTATION_TOPLEFT)
-         lrectwrite(0, y-(h-1), w-1, y, raster-x-(h-1)*w);
-     else
-         lrectwrite(0, y, w-1, y+h-1, raster);
-    }
-}
-
    - -

    (the original routine provided by the library is saved in -the variable putContig.)

    -
    - -

    SUPPORTING ADDITIONAL TIFF FORMATS

    - - - - - -
    -

    The TIFFRGBAImage routines support the most -commonly encountered flavors of TIFF. It is -possible to extend this support by overriding the -‘‘get method’’ invoked by -TIFFRGBAImageGet to read TIFF image -data. Details of doing this are a bit involved, it is best -to make a copy of an existing get method and modify it to -suit the needs of an application.

    -
    - -

    NOTES

    - - - - - -
    -

    Samples must be either 1, 2, 4, 8, or 16 bits. -Colorimetric samples/pixel must be either 1, 3, or 4 (i.e. -SamplesPerPixel minus ExtraSamples).

    - -

    Palette image colormaps that appear to be incorrectly -written as 8-bit values are automatically scaled to -16-bits.

    -
    - -

    RETURN VALUES

    - - - - - -
    -

    All routines return 1 if the operation was successful. -Otherwise, 0 is returned if an error was encountered and -stopOnError is zero.

    -
    - -

    DIAGNOSTICS

    - - - - - -
    -

    All error messages are directed to the -TIFFError(3TIFF) routine.

    - -

    Sorry, can not handle %d-bit pictures. The image -had BitsPerSample other than 1, 2, 4, 8, or 16.

    - -

    Sorry, can not handle %d-channel images. The image -had SamplesPerPixel other than 1, 3, or 4.

    - -

    Missing needed "PhotometricInterpretation" -tag. The image did not have a tag that describes how to -display the data.

    - -

    No "PhotometricInterpretation" tag, assuming -RGB. The image was missing a tag that describes how to -display it, but because it has 3 or 4 samples/pixel, it is -assumed to be RGB.

    - -

    No "PhotometricInterpretation" tag, assuming -min-is-black. The image was missing a tag that describes -how to display it, but because it has 1 sample/pixel, it is -assumed to be a grayscale or bilevel image.

    - -

    No space for photometric conversion table. There -was insufficient memory for a table used to convert image -samples to 8-bit RGB.

    - -

    Missing required "Colormap" tag. A -Palette image did not have a required Colormap -tag.

    - -

    No space for tile buffer. There was insufficient -memory to allocate an i/o buffer.

    - -

    No space for strip buffer. There was insufficient -memory to allocate an i/o buffer.

    - -

    Can not handle format. The image has a format -(combination of BitsPerSample, -SamplesPerPixel, and -PhotometricInterpretation) that can not be -handled.

    - -

    No space for B&W mapping table. There was -insufficient memory to allocate a table used to map -grayscale data to RGB.

    - -

    No space for Palette mapping table. There was -insufficient memory to allocate a table used to map data to -8-bit RGB.

    -
    - -

    SEE ALSO

    - - - - - -
    -

    TIFFOpen(3TIFF), TIFFReadRGBAImage(3TIFF), -TIFFReadRGBAImageOriented(3TIFF), -TIFFReadRGBAStrip(3TIFF), -TIFFReadRGBATile(3TIFF), libtiff(3TIFF)

    - -

    Libtiff library home page: -http://www.remotesensing.org/libtiff/

    -
    -
    - - diff --git a/tiff/html/man/TIFFReadDirectory.3tiff.html b/tiff/html/man/TIFFReadDirectory.3tiff.html deleted file mode 100644 index 5bb828e..0000000 --- a/tiff/html/man/TIFFReadDirectory.3tiff.html +++ /dev/null @@ -1,218 +0,0 @@ - - - - - - -TIFFReadDirectory - - - -

    TIFFReadDirectory

    -NAME
    -SYNOPSIS
    -DESCRIPTION
    -NOTES
    -RETURN VALUES
    -DIAGNOSTICS
    -SEE ALSO
    - -
    - -

    NAME

    - - - - - -
    -

    TIFFReadDirectory − get the contents of the -next directory in an open TIFF file

    -
    - -

    SYNOPSIS

    - - - - - -
    -

    #include <tiffio.h>

    - -

    int TIFFReadDirectory(TIFF -*tif)

    -
    - -

    DESCRIPTION

    - - - - - -
    -

    Read the next directory in the specified file and -make it the current directory. Applications only need to -call TIFFReadDirectory to read multiple subfiles in a -single TIFF file— the first directory in a -file is automatically read when TIFFOpen is -called.

    -
    - -

    NOTES

    - - - - - -
    -

    If the library is compiled with -STRIPCHOP_SUPPORT enabled, then images that have a -single uncompressed strip or tile of data are automatically -treated as if they were made up of multiple strips or tiles -of approximately 8 kilobytes each. This operation is done -only in-memory; it does not alter the contents of the file. -However, the construction of the ‘‘chopped -strips’’ is visible to the application through -the number of strips [tiles] returned by -TIFFNumberOfStrips -[TIFFNumberOfTiles].

    -
    - -

    RETURN VALUES

    - - - - - -
    -

    If the next directory was successfully read, 1 is -returned. Otherwise, 0 is returned if an error was -encountered, or if there are no more directories to be -read.

    -
    - -

    DIAGNOSTICS

    - - - - - -
    -

    All error messages are directed to the -TIFFError(3TIFF) routine. All warning messages are -directed to the TIFFWarning(3TIFF) routine.

    - -

    Seek error accessing TIFF directory. An error -occurred while positioning to the location of the -directory.

    - -

    Wrong data type %d for field "%s". -The tag entry in the directory had an incorrect data type. -For example, an ImageDescription tag with a -SHORT data type.

    - -

    TIFF directory is missing required "%s" -field. The specified tag is required to be present by -the TIFF 5.0 specification, but is missing. The -directory is (usually) unusable.

    - -

    %s: Rational with zero denominator. A -directory tag has a RATIONAL value whose -denominator is zero.

    - -

    Incorrect count %d for field "%s" (%lu, -expecting %lu); tag ignored. The specified tag’s -count field is bad. For example, a count other than 1 for a -SubFileType tag.

    - -

    Cannot handle different per-sample values for -field "%s". The tag has SamplesPerPixel -values and they are not all the same; e.g. -BitsPerSample. The library is unable to handle images -of this sort.

    - -

    Count mismatch for field "%s"; -expecting %d, got %d. The count field in a tag does not -agree with the number expected by the library. This should -never happen, so if it does, the library refuses to read the -directory.

    - -

    Invalid TIFF directory; tags are not sorted in -ascending order. The directory tags are not properly -sorted as specified in the TIFF 5.0 -specification. This error is not fatal.

    - -

    Ignoring unknown field with tag %d (0x%x). An -unknown tag was encountered in the directory; the library -ignores all such tags.

    - -

    TIFF directory is missing requred -"ImageLength" field. The image violates the -specification by not having a necessary field. There is no -way for the library to recover from this error.

    - -

    TIFF directory is missing requred -"PlanarConfig" field. The image violates the -specification by not having a necessary field. There is no -way for the library to recover from this error.

    - -

    TIFF directory is missing requred -"StripOffsets" field. The image has multiple -strips, but is missing the tag that specifies the file -offset to each strip of data. There is no way for the -library to recover from this error.

    - -

    TIFF directory is missing requred -"TileOffsets" field. The image has multiple -tiles, but is missing the tag that specifies the file offset -to each tile of data. There is no way for the library to -recover from this error.

    - -

    TIFF directory is missing required -"StripByteCounts" field. The image has -multiple strips, but is missing the tag that specifies the -size of each strip of data. There is no way for the library -to recover from this error.

    - -

    TIFF directory is missing required -"StripByteCounts" field, calculating from -imagelength. The image violates the specification by not -having a necessary field. However, when the image is -comprised of only one strip or tile, the library will -estimate the missing value based on the file size.

    - -

    Bogus "StripByteCounts" field, ignoring -and calculating from imagelength. Certain vendors -violate the specification by writing zero for the -StripByteCounts tag when they want to leave the value -unspecified. If the image has a single strip, the library -will estimate the missing value based on the file -size.

    -
    - -

    SEE ALSO

    - - - - - -
    -

    TIFFOpen(3TIFF), -TIFFWriteDirectory(3TIFF), -TIFFSetDirectory(3TIFF), -TIFFSetSubDirectory(3TIFF), -libtiff(3TIFF)

    - -

    Libtiff library home page: -http://www.remotesensing.org/libtiff/

    -
    -
    - - diff --git a/tiff/html/man/TIFFReadEncodedStrip.3tiff.html b/tiff/html/man/TIFFReadEncodedStrip.3tiff.html deleted file mode 100644 index 39d411d..0000000 --- a/tiff/html/man/TIFFReadEncodedStrip.3tiff.html +++ /dev/null @@ -1,133 +0,0 @@ - - - - - - -TIFFReadEncodedStrip - - - -

    TIFFReadEncodedStrip

    -NAME
    -SYNOPSIS
    -DESCRIPTION
    -NOTES
    -RETURN VALUES
    -DIAGNOSTICS
    -SEE ALSO
    - -
    - -

    NAME

    - - - - - -
    -

    TIFFReadEncodedStrip − read and decode a strip -of data from an open TIFF file

    -
    - -

    SYNOPSIS

    - - - - - -
    -

    #include <tiffio.h>

    - -

    tsize_t TIFFReadEncodedStrip(TIFF -*tif, tstrip_t strip, -tdata_t buf, tsize_t -size)

    -
    - -

    DESCRIPTION

    - - - - - -
    -

    Read the specified strip of data and place up to -size bytes of decompressed information in the (user -supplied) data buffer.

    -
    - -

    NOTES

    - - - - - -
    -

    The value of strip is a ‘‘raw -strip number.’’ That is, the caller must take -into account whether or not the data are organized in -separate planes (PlanarConfiguration=2). To read a -full strip of data the data buffer should typically be at -least as large as the number returned by -TIFFStripSize(3TIFF). If the -1 passed in size -parameter, the whole strip will be read. You should be sure -you have enough space allocated for the buffer.

    - -

    The library attempts to hide bit- and byte-ordering -differences between the image and the native machine by -converting data to the native machine order. Bit reversal is -done if the FillOrder tag is opposite to the native -machine bit order. 16- and 32-bit samples are automatically -byte-swapped if the file was written with a byte order -opposite to the native machine byte order,

    -
    - -

    RETURN VALUES

    - - - - - -
    -

    The actual number of bytes of data that were placed -in buf is returned; TIFFReadEncodedStrip -returns −1 if an error was encountered.

    -
    - -

    DIAGNOSTICS

    - - - - - -
    -

    All error messages are directed to the -TIFFError(3TIFF) routine.

    -
    - -

    SEE ALSO

    - - - - - -
    -

    TIFFOpen(3TIFF), -TIFFReadRawStrip(3TIFF), -TIFFReadScanline(3TIFF), -libtiff(3TIFF)

    - -

    Libtiff library home page: -http://www.remotesensing.org/libtiff/

    -
    -
    - - diff --git a/tiff/html/man/TIFFReadEncodedTile.3tiff.html b/tiff/html/man/TIFFReadEncodedTile.3tiff.html deleted file mode 100644 index 752b1ea..0000000 --- a/tiff/html/man/TIFFReadEncodedTile.3tiff.html +++ /dev/null @@ -1,130 +0,0 @@ - - - - - - -TIFFReadEncodedTile - - - -

    TIFFReadEncodedTile

    -NAME
    -SYNOPSIS
    -DESCRIPTION
    -NOTES
    -RETURN VALUES
    -DIAGNOSTICS
    -SEE ALSO
    - -
    - -

    NAME

    - - - - - -
    -

    TIFFReadEncodedTile − read and decode a tile of -data from an open TIFF file

    -
    - -

    SYNOPSIS

    - - - - - -
    -

    #include <tiffio.h>

    - -

    int TIFFReadEncodedTile(TIFF *tif, -ttile_t tile, tdata_t buf, -tsize_t size)

    -
    - -

    DESCRIPTION

    - - - - - -
    -

    Read the specified tile of data and place up to -size bytes of decompressed information in the (user -supplied) data buffer.

    -
    - -

    NOTES

    - - - - - -
    -

    The value of tile is a ‘‘raw tile -number.’’ That is, the caller must take into -account whether or not the data are organized in separate -planes (PlanarConfiguration=2). -TIFFComputeTile automatically does this when -converting an (x,y,z,sample) coordinate quadruple to a tile -number. To read a full tile of data the data buffer should -be at least as large as the value returned by -TIFFTileSize.

    - -

    The library attempts to hide bit- and byte-ordering -differences between the image and the native machine by -converting data to the native machine order. Bit reversal is -done if the FillOrder tag is opposite to the native -machine bit order. 16- and 32-bit samples are automatically -byte-swapped if the file was written with a byte order -opposite to the native machine byte order,

    -
    - -

    RETURN VALUES

    - - - - - -
    -

    The actual number of bytes of data that were placed in -buf is returned; TIFFReadEncodedTile returns -−1 if an error was encountered.

    -
    - -

    DIAGNOSTICS

    - - - - - -
    -

    All error messages are directed to the -TIFFError(3TIFF) routine.

    -
    - -

    SEE ALSO

    - - - - - -
    -

    TIFFOpen(3TIFF), TIFFReadRawTile(3TIFF), -TIFFReadTile(3TIFF), libtiff(3TIFF)

    - -

    Libtiff library home page: -http://www.remotesensing.org/libtiff/

    -
    -
    - - diff --git a/tiff/html/man/TIFFReadRGBAImage.3tiff.html b/tiff/html/man/TIFFReadRGBAImage.3tiff.html deleted file mode 100644 index 165284e..0000000 --- a/tiff/html/man/TIFFReadRGBAImage.3tiff.html +++ /dev/null @@ -1,301 +0,0 @@ - - - - - - -TIFFReadRGBAImage - - - -

    TIFFReadRGBAImage

    -NAME
    -SYNOPSIS
    -DESCRIPTION
    -NOTES
    -RETURN VALUES
    -DIAGNOSTICS
    -SEE ALSO
    - -
    - -

    NAME

    - - - - - -
    -

    TIFFReadRGBAImage, TIFFReadRGBAImageOriented − read -and decode an image into a fixed-format raster

    -
    - -

    SYNOPSIS

    - - - - - -
    -

    #include <tiffio.h>

    - -

    #define TIFFGetR(abgr) ((abgr) & 0xff)
    -#define TIFFGetG(abgr) (((abgr) >> 8) & 0xff)
    -#define TIFFGetB(abgr) (((abgr) >> 16) & 0xff)
    -#define TIFFGetA(abgr) (((abgr) >> 24) & -0xff)

    - -

    int TIFFReadRGBAImage(TIFF *tif, -uint32 width, uint32 height, -uint32 *raster, int -stopOnError)
    -int TIFFReadRGBAImageOriented(TIFF *    tif, -uint32 width, uint32 height, -uint32 *raster, int orientation, -int stopOnError)

    -
    - -

    DESCRIPTION

    - - - - - -
    -

    TIFFReadRGBAImage reads a strip- or tile-based -image into memory, storing the result in the user supplied -raster. The raster is assumed to be an array of -width times height 32-bit entries, where -width must be less than or equal to the width of the -image (height may be any non-zero size). If the -raster dimensions are smaller than the image, the image data -is cropped to the raster bounds. If the raster height is -greater than that of the image, then the image data are -placed in the lower part of the raster. (Note that the -raster is assume to be organized such that the pixel at -location (x,y) is -raster[y*width+x]; with the -raster origin in the lower-left hand corner.)

    - -

    TIFFReadRGBAImageOriented works like -TIFFReadRGBAImage with except of that user can -specify the raster origin position with the -orientation parameter. Four orientations -supported:

    -
    - - - - - -
    -

    ORIENTATION_TOPLEFT

    - - - - - -
    -

    origin in top-left corner,

    -
    - - - - - -
    -

    ORIENTATION_TOPRIGHT

    - - - - - -
    -

    origin in top-right corner,

    -
    - - - - - -
    -

    ORIENTATION_BOTLEFT

    - - - - - -
    -

    origin in bottom-left corner and

    -
    - - - - - -
    -

    ORIENTATION_BOTRIGHT

    - - - - - -
    -

    origin in bottom-right corner.

    -
    - - - - - -
    -

    If you choose ORIENTATION_BOTLEFT result will be -the same as returned by the TIFFReadRGBAImage.

    - -

    Raster pixels are 8-bit packed red, green, blue, alpha -samples. The macros TIFFGetR, TIFFGetG, -TIFFGetB, and TIFFGetA should be used to -access individual samples. Images without Associated Alpha -matting information have a constant Alpha of 1.0 (255).

    - -

    TIFFReadRGBAImage converts non-8-bit images by -scaling sample values. Palette, grayscale, bilevel, -CMYK , and YCbCr images are converted to -RGB transparently. Raster pixels are returned -uncorrected by any colorimetry information present in the -directory.

    - -

    The paramater stopOnError specifies how to act if -an error is encountered while reading the image. If -stopOnError is non-zero, then an error will terminate -the operation; otherwise TIFFReadRGBAImage will -continue processing data until all the possible data in the -image have been requested.

    -
    - -

    NOTES

    - - - - - -
    -

    In C++ the stopOnError parameter defaults to -0.

    - -

    Samples must be either 1, 2, 4, 8, or 16 bits. -Colorimetric samples/pixel must be either 1, 3, or 4 (i.e. -SamplesPerPixel minus ExtraSamples).

    - -

    Palettte image colormaps that appear to be incorrectly -written as 8-bit values are automatically scaled to -16-bits.

    - -

    TIFFReadRGBAImage is just a wrapper around the -more general TIFFRGBAImage(3TIFF) facilities.

    -
    - -

    RETURN VALUES

    - - - - - -
    -

    1 is returned if the image was successfully read and -converted. Otherwise, 0 is returned if an error was -encountered and stopOnError is zero.

    -
    - -

    DIAGNOSTICS

    - - - - - -
    -

    All error messages are directed to the -TIFFError(3TIFF) routine.

    - -

    Sorry, can not handle %d-bit pictures. The image -had BitsPerSample other than 1, 2, 4, 8, or 16.

    - -

    Sorry, can not handle %d-channel images. The image -had SamplesPerPixel other than 1, 3, or 4.

    - -

    Missing needed "PhotometricInterpretation" -tag. The image did not have a tag that describes how to -display the data.

    - -

    No "PhotometricInterpretation" tag, assuming -RGB. The image was missing a tag that describes how to -display it, but because it has 3 or 4 samples/pixel, it is -assumed to be RGB.

    - -

    No "PhotometricInterpretation" tag, assuming -min-is-black. The image was missing a tag that describes -how to display it, but because it has 1 sample/pixel, it is -assumed to be a grayscale or bilevel image.

    - -

    No space for photometric conversion table. There -was insufficient memory for a table used to convert image -samples to 8-bit RGB.

    - -

    Missing required "Colormap" tag. A -Palette image did not have a required Colormap -tag.

    - -

    No space for tile buffer. There was insufficient -memory to allocate an i/o buffer.

    - -

    No space for strip buffer. There was insufficient -memory to allocate an i/o buffer.

    - -

    Can not handle format. The image has a format -(combination of BitsPerSample, -SamplesPerPixel, and -PhotometricInterpretation) that -TIFFReadRGBAImage can not handle.

    - -

    No space for B&W mapping table. There was -insufficient memory to allocate a table used to map -grayscale data to RGB.

    - -

    No space for Palette mapping table. There was -insufficient memory to allocate a table used to map data to -8-bit RGB.

    -
    - -

    SEE ALSO

    - - - - - -
    -

    TIFFOpen(3TIFF), TIFFRGBAImage(3TIFF), -TIFFReadRGBAStrip(3TIFF), -TIFFReadRGBATile(3TIFF), libtiff(3TIFF)

    - -

    Libtiff library home page: -http://www.remotesensing.org/libtiff/

    -
    -
    - - diff --git a/tiff/html/man/TIFFReadRGBAStrip.3tiff.html b/tiff/html/man/TIFFReadRGBAStrip.3tiff.html deleted file mode 100644 index df09f64..0000000 --- a/tiff/html/man/TIFFReadRGBAStrip.3tiff.html +++ /dev/null @@ -1,208 +0,0 @@ - - - - - - -TIFFReadRGBAStrip - - - -

    TIFFReadRGBAStrip

    -NAME
    -SYNOPSIS
    -DESCRIPTION
    -NOTES
    -RETURN VALUES
    -DIAGNOSTICS
    -SEE ALSO
    - -
    - -

    NAME

    - - - - - -
    -

    TIFFReadRGBAStrip − read and decode an image strip -into a fixed-format raster

    -
    - -

    SYNOPSIS

    - - - - - -
    -

    #include <tiffio.h>

    - -

    #define TIFFGetR(abgr) ((abgr) & 0xff)
    -#define TIFFGetG(abgr) (((abgr) >> 8) & 0xff)
    -#define TIFFGetB(abgr) (((abgr) >> 16) & 0xff)
    -#define TIFFGetA(abgr) (((abgr) >> 24) & -0xff)

    - -

    int TIFFReadRGBAStrip(TIFF *tif, -uint32 row, uint32 -*raster)

    -
    - -

    DESCRIPTION

    - - - - - -
    -

    TIFFReadRGBAStrip reads a single strip of a -strip-based image into memory, storing the result in the -user supplied RGBA raster. The raster is assumed to -be an array of width times rowsperstrip 32-bit entries, -where width is the width of the image (TIFFTAG_IMAGEWIDTH) -and rowsperstrip is the maximum lines in a strip -(TIFFTAG_ROWSPERSTRIP).

    - -

    The row value should be the row of the first row -in the strip (strip * rowsperstrip, zero based).

    - -

    Note that the raster is assume to be organized such that -the pixel at location (x,y) is -raster[y*width+x]; with the -raster origin in the lower-left hand corner of the -strip. That is bottom to top organization. When reading a -partial last strip in the file the last line of the image -will begin at the beginning of the buffer.

    - -

    Raster pixels are 8-bit packed red, green, blue, alpha -samples. The macros TIFFGetR, TIFFGetG, -TIFFGetB, and TIFFGetA should be used to -access individual samples. Images without Associated Alpha -matting information have a constant Alpha of 1.0 (255).

    - -

    See the TIFFRGBAImage(3TIFF) page for more details -on how various image types are converted to RGBA values.

    -
    - -

    NOTES

    - - - - - -
    -

    Samples must be either 1, 2, 4, 8, or 16 bits. -Colorimetric samples/pixel must be either 1, 3, or 4 (i.e. -SamplesPerPixel minus ExtraSamples).

    - -

    Palette image colormaps that appear to be incorrectly -written as 8-bit values are automatically scaled to -16-bits.

    - -

    TIFFReadRGBAStrip is just a wrapper around the -more general TIFFRGBAImage(3TIFF) facilities. -It’s main advantage over the similar -TIFFReadRGBAImage() function is that for large images -a single buffer capable of holding the whole image -doesn’t need to be allocated, only enough for one -strip. The TIFFReadRGBATile() function does a similar -operation for tiled images.

    -
    - -

    RETURN VALUES

    - - - - - -
    -

    1 is returned if the image was successfully read and -converted. Otherwise, 0 is returned if an error was -encountered.

    -
    - -

    DIAGNOSTICS

    - - - - - -
    -

    All error messages are directed to the -TIFFError(3TIFF) routine.

    - -

    Sorry, can not handle %d-bit pictures. The image -had BitsPerSample other than 1, 2, 4, 8, or 16.

    - -

    Sorry, can not handle %d-channel images. The image -had SamplesPerPixel other than 1, 3, or 4.

    - -

    Missing needed "PhotometricInterpretation" -tag. The image did not have a tag that describes how to -display the data.

    - -

    No "PhotometricInterpretation" tag, assuming -RGB. The image was missing a tag that describes how to -display it, but because it has 3 or 4 samples/pixel, it is -assumed to be RGB.

    - -

    No "PhotometricInterpretation" tag, assuming -min-is-black. The image was missing a tag that describes -how to display it, but because it has 1 sample/pixel, it is -assumed to be a grayscale or bilevel image.

    - -

    No space for photometric conversion table. There -was insufficient memory for a table used to convert image -samples to 8-bit RGB.

    - -

    Missing required "Colormap" tag. A -Palette image did not have a required Colormap -tag.

    - -

    No space for tile buffer. There was insufficient -memory to allocate an i/o buffer.

    - -

    No space for strip buffer. There was insufficient -memory to allocate an i/o buffer.

    - -

    Can not handle format. The image has a format -(combination of BitsPerSample, -SamplesPerPixel, and -PhotometricInterpretation) that -TIFFReadRGBAImage can not handle.

    - -

    No space for B&W mapping table. There was -insufficient memory to allocate a table used to map -grayscale data to RGB.

    - -

    No space for Palette mapping table. There was -insufficient memory to allocate a table used to map data to -8-bit RGB.

    -
    - -

    SEE ALSO

    - - - - - -
    -

    TIFFOpen(3TIFF), TIFFRGBAImage(3TIFF), -TIFFReadRGBAImage(3TIFF), -TIFFReadRGBATile(3TIFF), libtiff(3TIFF)

    - -

    Libtiff library home page: -http://www.remotesensing.org/libtiff/

    -
    -
    - - diff --git a/tiff/html/man/TIFFReadRGBATile.3tiff.html b/tiff/html/man/TIFFReadRGBATile.3tiff.html deleted file mode 100644 index ed67b83..0000000 --- a/tiff/html/man/TIFFReadRGBATile.3tiff.html +++ /dev/null @@ -1,261 +0,0 @@ - - - - - - -TIFFReadRGBATile - - - -

    TIFFReadRGBATile

    -NAME
    -SYNOPSIS
    -DESCRIPTION
    -NOTES
    -RETURN VALUES
    -DIAGNOSTICS
    -SEE ALSO
    - -
    - -

    NAME

    - - - - - -
    -

    TIFFReadRGBATile − read and decode an image tile -into a fixed-format raster

    -
    - -

    SYNOPSIS

    - - - - - -
    -

    #include <tiffio.h>

    -
    - - - - - - - - - - - - - - - - - - - - - - - - - - -
    - -

    #define TIFFGetR(abgr)

    -    		 - -

    ((abgr) & 0xff)

    -
    - -

    #define TIFFGetG(abgr)

    -    		 - -

    (((abgr) >> 8) & 0xff)

    -
    - -

    #define TIFFGetB(abgr)

    -    		 - -

    (((abgr) >> 16) & 0xff)

    -
    - -

    #define TIFFGetA(abgr)

    -    		 - -

    (((abgr) >> 24) & 0xff)

    -
    - - - - - -
    -

    int TIFFReadRGBATile(TIFF *tif, -uint32 x, uint32 y, uint32 -*raster)

    -
    - -

    DESCRIPTION

    - - - - - -
    -

    TIFFReadRGBATile reads a single tile of a -tile-based image into memory, storing the result in the user -supplied RGBA raster. The raster is assumed to be an -array of width times length 32-bit entries, where width is -the width of a tile (TIFFTAG_TILEWIDTH) and length is the -height of a tile (TIFFTAG_TILELENGTH).

    - -

    The x and y values are the offsets from the -top left corner to the top left corner of the tile to be -read. They must be an exact multiple of the tile width and -length.

    - -

    Note that the raster is assume to be organized such that -the pixel at location (x,y) is -raster[y*width+x]; with the -raster origin in the lower-left hand corner of the -tile. That is bottom to top organization. Edge tiles which -partly fall off the image will be filled out with -appropriate zeroed areas.

    - -

    Raster pixels are 8-bit packed red, green, blue, alpha -samples. The macros TIFFGetR, TIFFGetG, -TIFFGetB, and TIFFGetA should be used to -access individual samples. Images without Associated Alpha -matting information have a constant Alpha of 1.0 (255).

    - -

    See the TIFFRGBAImage(3TIFF) page for more details -on how various image types are converted to RGBA values.

    -
    - -

    NOTES

    - - - - - -
    -

    Samples must be either 1, 2, 4, 8, or 16 bits. -Colorimetric samples/pixel must be either 1, 3, or 4 (i.e. -SamplesPerPixel minus ExtraSamples).

    - -

    Palette image colormaps that appear to be incorrectly -written as 8-bit values are automatically scaled to -16-bits.

    - -

    TIFFReadRGBATile is just a wrapper around the more -general TIFFRGBAImage(3TIFF) facilities. It’s -main advantage over the similar TIFFReadRGBAImage() -function is that for large images a single buffer capable of -holding the whole image doesn’t need to be allocated, -only enough for one tile. The TIFFReadRGBAStrip() -function does a similar operation for stripped images.

    -
    - -

    RETURN VALUES

    - - - - - -
    -

    1 is returned if the image was successfully read and -converted. Otherwise, 0 is returned if an error was -encountered.

    -
    - -

    DIAGNOSTICS

    - - - - - -
    -

    All error messages are directed to the -TIFFError(3TIFF) routine.

    - -

    Sorry, can not handle %d-bit pictures. The image -had BitsPerSample other than 1, 2, 4, 8, or 16.

    - -

    Sorry, can not handle %d-channel images. The image -had SamplesPerPixel other than 1, 3, or 4.

    - -

    Missing needed "PhotometricInterpretation" -tag. The image did not have a tag that describes how to -display the data.

    - -

    No "PhotometricInterpretation" tag, assuming -RGB. The image was missing a tag that describes how to -display it, but because it has 3 or 4 samples/pixel, it is -assumed to be RGB.

    - -

    No "PhotometricInterpretation" tag, assuming -min-is-black. The image was missing a tag that describes -how to display it, but because it has 1 sample/pixel, it is -assumed to be a grayscale or bilevel image.

    - -

    No space for photometric conversion table. There -was insufficient memory for a table used to convert image -samples to 8-bit RGB.

    - -

    Missing required "Colormap" tag. A -Palette image did not have a required Colormap -tag.

    - -

    No space for tile buffer. There was insufficient -memory to allocate an i/o buffer.

    - -

    No space for strip buffer. There was insufficient -memory to allocate an i/o buffer.

    - -

    Can not handle format. The image has a format -(combination of BitsPerSample, -SamplesPerPixel, and -PhotometricInterpretation) that -TIFFReadRGBAImage can not handle.

    - -

    No space for B&W mapping table. There was -insufficient memory to allocate a table used to map -grayscale data to RGB.

    - -

    No space for Palette mapping table. There was -insufficient memory to allocate a table used to map data to -8-bit RGB.

    -
    - -

    SEE ALSO

    - - - - - -
    -

    TIFFOpen(3TIFF), TIFFRGBAImage(3TIFF), -TIFFReadRGBAImage(3TIFF), -TIFFReadRGBAStrip(3TIFF), libtiff(3TIFF)

    - -

    Libtiff library home page: -http://www.remotesensing.org/libtiff/

    -
    -
    - - diff --git a/tiff/html/man/TIFFReadRawStrip.3tiff.html b/tiff/html/man/TIFFReadRawStrip.3tiff.html deleted file mode 100644 index bd14f72..0000000 --- a/tiff/html/man/TIFFReadRawStrip.3tiff.html +++ /dev/null @@ -1,109 +0,0 @@ - - - - - - -TIFFReadRawStrip - - - -

    TIFFReadRawStrip

    -NAME
    -SYNOPSIS
    -DESCRIPTION
    -RETURN VALUES
    -DIAGNOSTICS
    -SEE ALSO
    - -
    - -

    NAME

    - - - - - -
    -

    TIFFReadRawStrip − return the undecoded contents of -a strip of data from an open TIFF file

    -
    - -

    SYNOPSIS

    - - - - - -
    -

    #include <tiffio.h>

    - -

    tsize_t TIFFReadRawStrip(TIFF *tif, -tstrip_t strip, tdata_t buf, -tsize_t size)

    -
    - -

    DESCRIPTION

    - - - - - -
    -

    Read the contents of the specified strip into the (user -supplied) data buffer. Note that the value of strip -is a ‘‘raw strip number.’’ That is, -the caller must take into account whether or not the data is -organized in separate planes (PlanarConfiguration=2). -To read a full strip of data the data buffer should -typically be at least as large as the number returned by -TIFFStripSize.

    -
    - -

    RETURN VALUES

    - - - - - -
    -

    The actual number of bytes of data that were placed in -buf is returned; TIFFReadEncodedStrip returns -−1 if an error was encountered.

    -
    - -

    DIAGNOSTICS

    - - - - - -
    -

    All error messages are directed to the -TIFFError(3TIFF) routine.

    -
    - -

    SEE ALSO

    - - - - - -
    -

    TIFFOpen(3TIFF), -TIFFReadEncodedStrip(3TIFF), -TIFFReadScanline(3TIFF), TIFFStripSize(3TIFF), -libtiff(3TIFF)

    - -

    Libtiff library home page: -http://www.remotesensing.org/libtiff/

    -
    -
    - - diff --git a/tiff/html/man/TIFFReadRawTile.3tiff.html b/tiff/html/man/TIFFReadRawTile.3tiff.html deleted file mode 100644 index bae2b46..0000000 --- a/tiff/html/man/TIFFReadRawTile.3tiff.html +++ /dev/null @@ -1,111 +0,0 @@ - - - - - - -TIFFReadRawTile - - - -

    TIFFReadRawTile

    -NAME
    -SYNOPSIS
    -DESCRIPTION
    -RETURN VALUES
    -DIAGNOSTICS
    -SEE ALSO
    - -
    - -

    NAME

    - - - - - -
    -

    TIFFReadRawTile − return an undecoded tile of data -from an open TIFF file

    -
    - -

    SYNOPSIS

    - - - - - -
    -

    #include <tiffio.h>

    - -

    tsize_t TIFFReadRawTile(TIFF *tif, -ttile_t tile, tdata_t buf, -tsize_t size)

    -
    - -

    DESCRIPTION

    - - - - - -
    -

    Read the contents of the specified tile into the (user -supplied) data buffer. Note that the value of tile is -a ‘‘raw tile number.’’ That is, the -caller must take into account whether or not the data is -organized in separate planes (PlanarConfiguration=2). -TIFFComputeTile automatically does this when -converting an (x,y,z,sample) coordinate quadruple to a tile -number. To read a full tile of data the data buffer should -typically be at least as large as the value returned by -TIFFTileSize.

    -
    - -

    RETURN VALUES

    - - - - - -
    -

    The actual number of bytes of data that were placed in -buf is returned; TIFFReadEncodedTile returns -−1 if an error was encountered.

    -
    - -

    DIAGNOSTICS

    - - - - - -
    -

    All error messages are directed to the -TIFFError(3TIFF) routine.

    -
    - -

    SEE ALSO

    - - - - - -
    -

    TIFFOpen(3TIFF), -TIFFReadEncodedTile(3TIFF), -TIFFReadTile(3TIFF), TIFFTileSize(3TIFF), -libtiff(3TIFF)

    - -

    Libtiff library home page: -http://www.remotesensing.org/libtiff/

    -
    -
    - - diff --git a/tiff/html/man/TIFFReadScanline.3tiff.html b/tiff/html/man/TIFFReadScanline.3tiff.html deleted file mode 100644 index 423645c..0000000 --- a/tiff/html/man/TIFFReadScanline.3tiff.html +++ /dev/null @@ -1,157 +0,0 @@ - - - - - - -TIFFReadScanline - - - -

    TIFFReadScanline

    -NAME
    -SYNOPSIS
    -DESCRIPTION
    -NOTES
    -RETURN VALUES
    -DIAGNOSTICS
    -BUGS
    -SEE ALSO
    - -
    - -

    NAME

    - - - - - -
    -

    TIFFReadScanline − read and decode a scanline of -data from an open TIFF file

    -
    - -

    SYNOPSIS

    - - - - - -
    -

    #include <tiffio.h>

    - -

    int TIFFReadScanline(TIFF *tif, -tdata_t buf, uint32 row, -tsample_t sample)

    -
    - -

    DESCRIPTION

    - - - - - -
    -

    Read the data for the specified row into the (user -supplied) data buffer buf. The data are returned -decompressed and, in the native byte- and bit-ordering, but -are otherwise packed (see further below). The buffer must be -large enough to hold an entire scanline of data. -Applications should call the routine TIFFScanlineSize -to find out the size (in bytes) of a scanline buffer. The -row parameter is always used by -TIFFReadScanline; the sample parameter is used -only if data are organized in separate planes -(PlanarConfiguration=2).

    -
    - -

    NOTES

    - - - - - -
    -

    The library attempts to hide bit- and byte-ordering -differences between the image and the native machine by -converting data to the native machine order. Bit reversal is -done if the FillOrder tag is opposite to the native -machine bit order. 16- and 32-bit samples are automatically -byte-swapped if the file was written with a byte order -opposite to the native machine byte order,

    - -

    In C++ the sample parameter defaults to 0.

    -
    - -

    RETURN VALUES

    - - - - - -
    -

    TIFFReadScanline returns −1 if it detects an -error; otherwise 1 is returned.

    -
    - -

    DIAGNOSTICS

    - - - - - -
    -

    All error messages are directed to the -TIFFError(3TIFF) routine.

    - -

    Compression algorithm does not support random -access. Data was requested in a non-sequential order -from a file that uses a compression algorithm and that has -RowsPerStrip greater than one. That is, data in the -image is stored in a compressed form, and with multiple rows -packed into a strip. In this case, the library does not -support random access to the data. The data should either be -accessed sequentially, or the file should be converted so -that each strip is made up of one row of data.

    -
    - -

    BUGS

    - - - - - -
    -

    Reading subsampled YCbCR data does not work correctly -because, for PlanarConfiguration=2 the size of a -scanline is not calculated on a per-sample basis, and for -PlanarConfiguration=1 the library does not unpack the -block-interleaved samples; use the strip- and tile-based -interfaces to read these formats.

    -
    - -

    SEE ALSO

    - - - - - -
    -

    TIFFOpen(3TIFF), -TIFFReadEncodedStrip(3TIFF), -TIFFReadRawStrip(3TIFF), libtiff(3TIFF)

    - -

    Libtiff library home page: -http://www.remotesensing.org/libtiff/

    -
    -
    - - diff --git a/tiff/html/man/TIFFReadTile.3tiff.html b/tiff/html/man/TIFFReadTile.3tiff.html deleted file mode 100644 index ff726b4..0000000 --- a/tiff/html/man/TIFFReadTile.3tiff.html +++ /dev/null @@ -1,133 +0,0 @@ - - - - - - -TIFFReadTile - - - -

    TIFFReadTile

    -NAME
    -SYNOPSIS
    -DESCRIPTION
    -NOTES
    -RETURN VALUES
    -DIAGNOSTICS
    -SEE ALSO
    - -
    - -

    NAME

    - - - - - -
    -

    TIFFReadTile − read and decode a tile of data from -an open TIFF file

    -
    - -

    SYNOPSIS

    - - - - - -
    -

    #include <tiffio.h>

    - -

    tsize_t TIFFReadTile(TIFF *tif, -tdata_t buf, uint32 x, -uint32 y, uint32 z, -tsample_t sample)

    -
    - -

    DESCRIPTION

    - - - - - -
    -

    Return the data for the tile containing the -specified coordinates. The data placed in buf are -returned decompressed and, typically, in the native byte- -and bit-ordering, but are otherwise packed (see further -below). The buffer must be large enough to hold an entire -tile of data. Applications should call the routine -TIFFTileSize to find out the size (in bytes) of a -tile buffer. The x and y parameters are always -used by TIFFReadTile. The z parameter is used -if the image is deeper than 1 slice -(ImageDepth>1). The sample parameter is -used only if data are organized in separate planes -(PlanarConfiguration=2).

    -
    - -

    NOTES

    - - - - - -
    -

    The library attempts to hide bit- and byte-ordering -differences between the image and the native machine by -converting data to the native machine order. Bit reversal is -done if the FillOrder tag is opposite to the native -machine bit order. 16- and 32-bit samples are automatically -byte-swapped if the file was written with a byte order -opposite to the native machine byte order,

    -
    - -

    RETURN VALUES

    - - - - - -
    -

    TIFFReadTile returns −1 if it detects an -error; otherwise the number of bytes in the decoded tile is -returned.

    -
    - -

    DIAGNOSTICS

    - - - - - -
    -

    All error messages are directed to the -TIFFError(3TIFF) routine.

    -
    - -

    SEE ALSO

    - - - - - -
    -

    TIFFCheckTile(3TIFF), -TIFFComputeTile(3TIFF), TIFFOpen(3TIFF), -TIFFReadEncodedTile(3TIFF), -TIFFReadRawTile(3TIFF), libtiff(3TIFF)

    - -

    Libtiff library home page: -http://www.remotesensing.org/libtiff/

    -
    -
    - - diff --git a/tiff/html/man/TIFFSetDirectory.3tiff.html b/tiff/html/man/TIFFSetDirectory.3tiff.html deleted file mode 100644 index a0e5cfc..0000000 --- a/tiff/html/man/TIFFSetDirectory.3tiff.html +++ /dev/null @@ -1,122 +0,0 @@ - - - - - - -TIFFSetDirectory - - - -

    TIFFSetDirectory

    -NAME
    -SYNOPSIS
    -DESCRIPTION
    -RETURN VALUES
    -DIAGNOSTICS
    -SEE ALSO
    - -
    - -

    NAME

    - - - - - -
    -

    TIFFSetDirectory, TIFFSetSubDirectory − set the -current directory for an open TIFF file

    -
    - -

    SYNOPSIS

    - - - - - -
    -

    #include <tiffio.h>

    - -

    int TIFFSetDirectory(TIFF *tif, -tdir_t dirnum)
    -int TIFFSetSubDirectory(TIFF *    tif, uint32 -diroff)

    -
    - -

    DESCRIPTION

    - - - - - -
    -

    TIFFSetDirectory changes the current directory and -reads its contents with TIFFReadDirectory. The -parameter dirnum specifies the subfile/directory as -an integer number, with the first directory numbered -zero.

    - -

    TIFFSetSubDirectory acts like -TIFFSetDirectory, except the directory is specified -as a file offset instead of an index; this is required for -accessing subdirectories linked through a SubIFD -tag.

    -
    - -

    RETURN VALUES

    - - - - - -
    -

    On successful return 1 is returned. Otherwise, 0 is -returned if dirnum or diroff specifies a -non-existent directory, or if an error was encountered while -reading the directory’s contents.

    -
    - -

    DIAGNOSTICS

    - - - - - -
    -

    All error messages are directed to the -TIFFError(3TIFF) routine.

    - -

    %s: Error fetching directory count. An error was -encountered while reading the ‘‘directory -count’’ field.

    - -

    %s: Error fetching directory link. An error was -encountered while reading the ‘‘link -value’’ that points to the next directory in a -file.

    -
    - -

    SEE ALSO

    - - - - - -
    -

    TIFFCurrentDirectory(3TIFF), -TIFFOpen(3TIFF), TIFFReadDirectory(3TIFF), -TIFFWriteDirectory(3TIFF), libtiff(3TIFF)

    - -

    Libtiff library home page: -http://www.remotesensing.org/libtiff/

    -
    -
    - - diff --git a/tiff/html/man/TIFFSetField.3tiff.html b/tiff/html/man/TIFFSetField.3tiff.html deleted file mode 100644 index 2e70225..0000000 --- a/tiff/html/man/TIFFSetField.3tiff.html +++ /dev/null @@ -1,1362 +0,0 @@ - - - - - - -TIFFSetField - - - -

    TIFFSetField

    -NAME
    -SYNOPSIS
    -DESCRIPTION
    -RETURN VALUES
    -DIAGNOSTICS
    -SEE ALSO
    - -
    - -

    NAME

    - - - - - -
    -

    TIFFSetField, TIFFVSetField − set the value(s) of a -tag in a TIFF file open for writing

    -
    - -

    SYNOPSIS

    - - - - - -
    -

    #include <tiffio.h>

    - -

    int TIFFSetField(TIFF *tif, ttag_t -tag, ...)

    - -

    #include <stdarg.h>

    - -

    int TIFFVSetField(TIFF *tif, ttag_t -tag, va_list ap)

    -
    - -

    DESCRIPTION

    - - - - - -
    -

    TIFFSetField sets the value of a field or -pseudo-tag in the current directory associated with the open -TIFF file tif. (A pseudo-tag is -a parameter that is used to control the operation of the -TIFF library but whose value is not read or -written to the underlying file.) To set the value of a field -the file must have been previously opened for writing with -TIFFOpen(3TIFF); pseudo-tags can be set whether the -file was opened for reading or writing. The field is -identified by tag, one of the values defined in the -include file tiff.h (see also the table below). The -actual value is specified using a variable argument list, as -prescribed by the stdarg(3) interface (or, on some -machines, the varargs(3) interface.)

    - -

    TIFFVSetField is functionally equivalent to -TIFFSetField except that it takes a pointer to a -variable argument list. TIFFVSetField is useful for -writing routines that are layered on top of the -functionality provided by TIFFSetField.

    - -

    The tags understood by libtiff, the number of -parameter values, and the expected types for the parameter -values are shown below. The data types are: char* is -null-terminated string and corresponds to the -ASCII data type; uint16 is an unsigned -16-bit value; uint32 is an unsigned 32-bit value; -uint16* is an array of unsigned 16-bit values. -void* is an array of data values of unspecified -type.

    - -

    Consult the TIFF specification for -information on the meaning of each tag.

    - - -

    Tag Name Count Types Notes

    - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
    - -

    TIFFTAG_ARTIST

    -    		 - -

    1

    -    		 - -

    char*

    -    		 -
    - -

    TIFFTAG_BADFAXLINES

    -    		 - -

    1

    -    		 - -

    uint32

    -    		 -
    - -

    TIFFTAG_BITSPERSAMPLE

    -    		 - -

    1

    -    		 - -

    uint16

    -    		 - -

    †

    -
    - -

    TIFFTAG_CLEANFAXDATA

    -    		 - -

    1

    -    		 - -

    uint16

    -    		 -
    - -

    TIFFTAG_COLORMAP

    -    		 - -

    3

    -    		 - -

    uint16*

    -    		 - -

    1<<BitsPerSample arrays

    -
    - -

    TIFFTAG_COMPRESSION

    -    		 - -

    1

    -    		 - -

    uint16

    -    		 - -

    †

    -
    - -

    TIFFTAG_CONSECUTIVEBADFAXLINES

    -    		 - -

    1

    -    		 - -

    uint32

    -    		 -
    - -

    TIFFTAG_COPYRIGHT

    -    		 - -

    1

    -    		 - -

    char*

    -    		 -
    - -

    TIFFTAG_DATETIME

    -    		 - -

    1

    -    		 - -

    char*

    -    		 -
    - -

    TIFFTAG_DOCUMENTNAME

    -    		 - -

    1

    -    		 - -

    char*

    -    		 -
    - -

    TIFFTAG_DOTRANGE

    -    		 - -

    2

    -    		 - -

    uint16

    -    		 -
    - -

    TIFFTAG_EXTRASAMPLES

    -    		 - -

    2

    -    		 - -

    uint16,uint16*

    -    		 - -

    † count & types array

    -
    - -

    TIFFTAG_FAXFILLFUNC

    -    		 - -

    1

    -    		 - -

    TIFFFaxFillFunc

    -    		 - -

    G3/G4 compression pseudo-tag

    -
    - -

    TIFFTAG_FAXMODE

    -    		 - -

    1

    -    		 - -

    int

    -    		 - -

    † G3/G4 compression pseudo-tag

    -
    - -

    TIFFTAG_FILLORDER

    -    		 - -

    1

    -    		 - -

    uint16

    -    		 - -

    †

    -
    - -

    TIFFTAG_GROUP3OPTIONS

    -    		 - -

    1

    -    		 - -

    uint32

    -    		 - -

    †

    -
    - -

    TIFFTAG_GROUP4OPTIONS

    -    		 - -

    1

    -    		 - -

    uint32

    -    		 - -

    †

    -
    - -

    TIFFTAG_HALFTONEHINTS

    -    		 - -

    2

    -    		 - -

    uint16

    -    		 -
    - -

    TIFFTAG_HOSTCOMPUTER

    -    		 - -

    1

    -    		 - -

    char*

    -    		 -
    - -

    TIFFTAG_ICCPROFILE

    -    		 - -

    2

    -    		 - -

    uint32,void*

    -    		 - -

    count, profile data

    -
    - -

    TIFFTAG_IMAGEDEPTH

    -    		 - -

    1

    -    		 - -

    uint32

    -    		 - -

    †

    -
    - -

    TIFFTAG_IMAGEDESCRIPTION

    -    		 - -

    1

    -    		 - -

    char*

    -    		 -
    - -

    TIFFTAG_IMAGELENGTH

    -    		 - -

    1

    -    		 - -

    uint32

    -    		 -
    - -

    TIFFTAG_IMAGEWIDTH

    -    		 - -

    1

    -    		 - -

    uint32

    -    		 - -

    †

    -
    - -

    TIFFTAG_INKNAMES

    -    		 - -

    2

    -    		 - -

    uint16, char*

    -    		 -
    - -

    TIFFTAG_INKSET

    -    		 - -

    1

    -    		 - -

    uint16

    -    		 - -

    †

    -
    - -

    TIFFTAG_JPEGCOLORMODE

    -    		 - -

    1

    -    		 - -

    int

    -    		 - -

    † JPEG pseudo-tag

    -
    - -

    TIFFTAG_JPEGQUALITY

    -    		 - -

    1

    -    		 - -

    int

    -    		 - -

    JPEG pseudo-tag

    -
    - -

    TIFFTAG_JPEGTABLES

    -    		 - -

    2

    -    		 - -

    uint32*,void*

    -    		 - -

    † count & tables

    -
    - -

    TIFFTAG_JPEGTABLESMODE

    -    		 - -

    1

    -    		 - -

    int

    -    		 - -

    † JPEG pseudo-tag

    -
    - -

    TIFFTAG_MAKE

    -    		 - -

    1

    -    		 - -

    char*

    -    		 -
    - -

    TIFFTAG_MATTEING

    -    		 - -

    1

    -    		 - -

    uint16

    -    		 - -

    †

    -
    - -

    TIFFTAG_MAXSAMPLEVALUE

    -    		 - -

    1

    -    		 - -

    uint16

    -    		 -
    - -

    TIFFTAG_MINSAMPLEVALUE

    -    		 - -

    1

    -    		 - -

    uint16

    -    		 -
    - -

    TIFFTAG_MODEL

    -    		 - -

    1

    -    		 - -

    char*

    -    		 -
    - -

    TIFFTAG_ORIENTATION

    -    		 - -

    1

    -    		 - -

    uint16

    -    		 -
    - -

    TIFFTAG_PAGENAME

    -    		 - -

    1

    -    		 - -

    char*

    -    		 -
    - -

    TIFFTAG_PAGENUMBER

    -    		 - -

    2

    -    		 - -

    uint16

    -    		 -
    - -

    TIFFTAG_PHOTOMETRIC

    -    		 - -

    1

    -    		 - -

    uint16

    -    		 -
    - -

    TIFFTAG_PHOTOSHOP

    -    		 - -

    ?

    -    		 - -

    uint32,void*

    -    		 - -

    count, data

    -
    - -

    TIFFTAG_PLANARCONFIG

    -    		 - -

    1

    -    		 - -

    uint16

    -    		 - -

    †

    -
    - -

    TIFFTAG_PREDICTOR

    -    		 - -

    1

    -    		 - -

    uint16

    -    		 - -

    †

    -
    - -

    TIFFTAG_PRIMARYCHROMATICITIES

    -    		 - -

    1

    -    		 - -

    float*

    -    		 - -

    6-entry array

    -
    - -

    TIFFTAG_REFERENCEBLACKWHITE

    -    		 - -

    1

    -    		 - -

    float*

    -    		 - -

    † 2*SamplesPerPixel array

    -
    - -

    TIFFTAG_RESOLUTIONUNIT

    -    		 - -

    1

    -    		 - -

    uint16

    -    		 -
    - -

    TIFFTAG_RICHTIFFIPTC

    -    		 - -

    2

    -    		 - -

    uint32,void*

    -    		 - -

    count, data

    -
    - -

    TIFFTAG_ROWSPERSTRIP

    -    		 - -

    1

    -    		 - -

    uint32

    -    		 - -

    † must be > 0

    -
    - -

    TIFFTAG_SAMPLEFORMAT

    -    		 - -

    1

    -    		 - -

    uint16

    -    		 - -

    †

    -
    - -

    TIFFTAG_SAMPLESPERPIXEL

    -    		 - -

    1

    -    		 - -

    uint16

    -    		 - -

    † value must be <= 4

    -
    - -

    TIFFTAG_SMAXSAMPLEVALUE

    -    		 - -

    1

    -    		 - -

    double

    -    		 -
    - -

    TIFFTAG_SMINSAMPLEVALUE

    -    		 - -

    1

    -    		 - -

    double

    -    		 -
    - -

    TIFFTAG_SOFTWARE

    -    		 - -

    1

    -    		 - -

    char*

    -    		 -
    - -

    TIFFTAG_STONITS

    -    		 - -

    1

    -    		 - -

    double

    -    		 - -

    †

    -
    - -

    TIFFTAG_SUBFILETYPE

    -    		 - -

    1

    -    		 - -

    uint32

    -    		 -
    - -

    TIFFTAG_SUBIFD

    -    		 - -

    2

    -    		 - -

    uint16,uint32*

    -    		 - -

    count & offsets array

    -
    - -

    TIFFTAG_TARGETPRINTER

    -    		 - -

    1

    -    		 - -

    char*

    -    		 -
    - -

    TIFFTAG_THRESHHOLDING

    -    		 - -

    1

    -    		 - -

    uint16

    -    		 -
    - -

    TIFFTAG_TILEDEPTH

    -    		 - -

    1

    -    		 - -

    uint32

    -    		 - -

    †

    -
    - -

    TIFFTAG_TILELENGTH

    -    		 - -

    1

    -    		 - -

    uint32

    -    		 - -

    † must be a multiple of 8

    -
    - -

    TIFFTAG_TILEWIDTH

    -    		 - -

    1

    -    		 - -

    uint32

    -    		 - -

    † must be a multiple of 8

    -
    - -

    TIFFTAG_TRANSFERFUNCTION

    -    		 - -

    1 or 3‡ uint16*

    -    		 - -

    1<<BitsPerSample entry arrays

    -
    - -

    TIFFTAG_WHITEPOINT

    -    		 - -

    1

    -    		 - -

    float*

    -    		 - -

    2-entry array

    -
    - -

    TIFFTAG_XMLPACKET

    -    		 - -

    2

    -    		 - -

    uint32,void*

    -    		 - -

    count, data

    -
    - -

    TIFFTAG_XPOSITION

    -    		 - -

    1

    -    		 - -

    float

    -    		 -
    - -

    TIFFTAG_XRESOLUTION

    -    		 - -

    1

    -    		 - -

    float

    -    		 -
    - -

    TIFFTAG_YCBCRCOEFFICIENTS

    -    		 - -

    1

    -    		 - -

    float*

    -    		 - -

    † 3-entry array

    -
    - -

    TIFFTAG_YCBCRPOSITIONING

    -    		 - -

    1

    -    		 - -

    uint16

    -    		 - -

    †

    -
    - -

    TIFFTAG_YCBCRSAMPLING

    -    		 - -

    2

    -    		 - -

    uint16

    -    		 - -

    †

    -
    - -

    TIFFTAG_YPOSITION

    -    		 - -

    1

    -    		 - -

    float

    -    		 -
    - -

    TIFFTAG_YRESOLUTION

    -    		 - -

    1

    -    		 - -

    float

    -    		 -
    - - - - - -
    -

    † Tag may not have its values changed once data is -written.
    -‡ If SamplesPerPixel is one, then a single -array is passed; otherwise three arrays should be -passed.
    -* The contents of this field are quite complex. See The -ICC Profile Format Specification, Annex B.3 -"Embedding ICC Profiles in TIFF Files" (available -at http://www.color.org) for an explanation.

    -
    - -

    RETURN VALUES

    - - - - - -
    -

    1 is returned if the operation was successful. Otherwise, -0 is returned if an error was detected.

    -
    - -

    DIAGNOSTICS

    - - - - - -
    -

    All error messages are directed to the -TIFFError(3TIFF) routine.

    - -

    %s: Cannot modify tag "%s" while -writing. Data has already been written to the file, so -the specified tag’s value can not be changed. This -restriction is applied to all tags that affect the format of -written data.

    - -

    %d: Bad value for "%s". An invalid value -was supplied for the named tag.

    -
    - -

    SEE ALSO

    - - - - - -
    -

    TIFFOpen(3TIFF), TIFFGetField(3TIFF), -TIFFSetDirectory(3TIFF), -TIFFWriteDirectory(3TIFF), -TIFFReadDirectory(3TIFF), libtiff(3TIFF)

    - -

    Libtiff library home page: -http://www.remotesensing.org/libtiff/

    -
    -
    - - diff --git a/tiff/html/man/TIFFWarning.3tiff.html b/tiff/html/man/TIFFWarning.3tiff.html deleted file mode 100644 index df17073..0000000 --- a/tiff/html/man/TIFFWarning.3tiff.html +++ /dev/null @@ -1,108 +0,0 @@ - - - - - - -TIFFWarning - - - -

    TIFFWarning

    -NAME
    -SYNOPSIS
    -DESCRIPTION
    -RETURN VALUES
    -SEE ALSO
    - -
    - -

    NAME

    - - - - - -
    -

    TIFFWarning, TIFFSetWarningHandler − library -warning interface

    -
    - -

    SYNOPSIS

    - - - - - -
    -

    #include <tiffio.h>

    - -

    void TIFFWarning(const char *module, -const char *fmt, ...)

    - -

    #include <stdargh.h>

    - -

    typedef void (*TIFFWarningHandler)(const char -*module, const char *fmt, -va_list ap);

    - -

    TIFFWarningHandler -TIFFSetWarningHandler(TIFFWarningHandler -handler);

    -
    - -

    DESCRIPTION

    - - - - - -
    -

    TIFFWarning invokes the library-wide warning -handler function to (normally) write a warning message to -the stderr. The fmt parameter is a -printf(3S) format string, and any number arguments -can be supplied. The module parameter is interpreted -as a string that, if non-zero, should be printed before the -message; it typically is used to identify the software -module in which a warning is detected.

    - -

    Applications that desire to capture control in the event -of a warning should use TIFFSetWarningHandler to -override the default warning handler. A NULL -(0) warning handler function may be installed to suppress -error messages.

    -
    - -

    RETURN VALUES

    - - - - - -
    -

    TIFFSetWarningHandler returns a reference to the -previous error handling function.

    -
    - -

    SEE ALSO

    - - - - - -
    -

    TIFFError(3TIFF), libtiff(3TIFF), -printf(3)

    - -

    Libtiff library home page: -http://www.remotesensing.org/libtiff/

    -
    -
    - - diff --git a/tiff/html/man/TIFFWriteDirectory.3tiff.html b/tiff/html/man/TIFFWriteDirectory.3tiff.html deleted file mode 100644 index 07a443e..0000000 --- a/tiff/html/man/TIFFWriteDirectory.3tiff.html +++ /dev/null @@ -1,176 +0,0 @@ - - - - - - -TIFFWriteDirectory - - - -

    TIFFWriteDirectory

    -NAME
    -SYNOPSIS
    -DESCRIPTION
    -RETURN VALUES
    -DIAGNOSTICS
    -SEE ALSO
    - -
    - -

    NAME

    - - - - - -
    -

    TIFFWriteDirectory, TIFFRewriteDirectory, -TIFFCheckpointDirectory − write the current directory -in an open TIFF file

    -
    - -

    SYNOPSIS

    - - - - - -
    -

    #include <tiffio.h>

    - -

    int TIFFWriteDirectory(TIFF *tif)
    -int TIFFRewriteDirectory(TIFF *    tif)
    -int TIFFCheckpointDirectory(TIFF *    tif)

    -
    - -

    DESCRIPTION

    - - - - - -
    -

    TIFFWriteDirectory will write the contents of the -current directory to the file and setup to create a new -subfile in the same file. Applications only need to call -TIFFWriteDirectory when writing multiple subfiles to -a single TIFF file. TIFFWriteDirectory -is automatically called by TIFFClose and -TIFFFlush to write a modified directory if the file -is open for writing.

    - -

    The TIFFRewriteDirectory function operates -similarly to TIFFWriteDirectory, but can be called -with directories previously read or written that already -have an established location in the file. It will rewrite -the directory, but instead of place it at it’s old -location (as TIFFWriteDirectory would) it will place -them at the end of the file, correcting the pointer from the -preceeding directory or file header to point to it’s -new location. This is particularly important in cases where -the size of the directory and pointed to data has grown, so -it won’t fit in the space available at the old -location.

    - -

    The TIFFCheckpointDirectory writes the current -state of the tiff directory into the file to make what is -currently in the file readable. Unlike -TIFFWriteDirectory, TIFFCheckpointDirectory does not -free up the directory data structures in memory, so they can -be updated (as strips/tiles are written) and written again. -Reading such a partial file you will at worst get a tiff -read error for the first strip/tile encountered that is -incomplete, but you will at least get all the valid data in -the file before that. When the file is complete, just use -TIFFWriteDirectory as usual to finish it off -cleanly.

    -
    - -

    RETURN VALUES

    - - - - - -
    -

    1 is returned when the contents are successfully written -to the file. Otherwise, 0 is returned if an error was -encountered when writing the directory contents.

    -
    - -

    DIAGNOSTICS

    - - - - - -
    -

    All error messages are directed to the -TIFFError(3TIFF) routine.

    - -

    Error post-encoding before directory write. Before -writing the contents of the current directory, any pending -data are flushed. This message indicates that an error -occurred while doing this.

    - -

    Error flushing data before directory write. Before -writing the contents of the current directory, any pending -data are flushed. This message indicates that an error -occurred while doing this.

    - -

    Cannot write directory, out of space. There was -not enough space to allocate a temporary area for the -directory that was to be written.

    - -

    Error writing directory count. A write error -occurred when writing the count of fields in the -directory.

    - -

    Error writing directory contents. A write error -occurred when writing the directory fields.

    - -

    Error writing directory link. A write error -occurred when writing the link to the next directory.

    - -

    Error writing data for field "%s". A -write error occurred when writing indirect data for the -specified field.

    - -

    Error writing TIFF header. A write error occurred -when re-writing header at the front of the file.

    - -

    Error fetching directory count. A read error -occurred when fetching the directory count field for a -previous directory. This can occur when setting up a link to -the directory that is being written.

    - -

    Error fetching directory link. A read error -occurred when fetching the directory link field for a -previous directory. This can occur when setting up a link to -the directory that is being written.

    -
    - -

    SEE ALSO

    - - - - - -
    -

    TIFFOpen(3TIFF), TIFFError(3TIFF), -TIFFReadDirectory(3TIFF), -TIFFSetDirectory(3TIFF), libtiff(3TIFF)

    - -

    Libtiff library home page: -http://www.remotesensing.org/libtiff/

    -
    -
    - - diff --git a/tiff/html/man/TIFFWriteEncodedStrip.3tiff.html b/tiff/html/man/TIFFWriteEncodedStrip.3tiff.html deleted file mode 100644 index 5a45f59..0000000 --- a/tiff/html/man/TIFFWriteEncodedStrip.3tiff.html +++ /dev/null @@ -1,153 +0,0 @@ - - - - - - -TIFFWriteEncodedStrip - - - -

    TIFFWriteEncodedStrip

    -NAME
    -SYNOPSIS
    -DESCRIPTION
    -NOTES
    -RETURN VALUES
    -DIAGNOSTICS
    -SEE ALSO
    - -
    - -

    NAME

    - - - - - -
    -

    TIFFWritedEncodedStrip − compress and write a -strip of data to an open TIFF file

    -
    - -

    SYNOPSIS

    - - - - - -
    -

    #include <tiffio.h>

    - -

    tsize_t TIFFWriteEncodedStrip(TIFF -*tif, tstrip_t strip, -tdata_t buf, tsize_t -size)

    -
    - -

    DESCRIPTION

    - - - - - -
    -

    Compress size bytes of raw data from -buf and write the result to the specified strip; -replacing any previously written data. Note that the value -of strip is a ‘‘raw strip -number.’’ That is, the caller must take into -account whether or not the data are organized in separate -planes (PlanarConfiguration=2).

    -
    - -

    NOTES

    - - - - - -
    -

    The library writes encoded data using the native -machine byte order. Correctly implemented TIFF -readers are expected to do any necessary byte-swapping -to correctly process image data with BitsPerSample greater -than 8.

    - -

    The strip number must be valid according to the -current settings of the ImageLength and -RowsPerStrip tags. An image may be dynamically grown -by increasing the value of ImageLength prior to each -call to TIFFWriteEncodedStrip.

    -
    - -

    RETURN VALUES

    - - - - - -
    -

    −1 is returned if an error was encountered. -Otherwise, the value of size is returned.

    -
    - -

    DIAGNOSTICS

    - - - - - -
    -

    All error messages are directed to the -TIFFError(3TIFF) routine.

    - -

    %s: File not open for writing. The file was -opened for reading, not writing.

    - -

    Can not write scanlines to a tiled image. The -image is assumed to be organized in tiles because the -TileWidth and TileLength tags have been set -with TIFFSetField(3TIFF).

    - -

    %s: Must set "ImageWidth" before -writing data. The image’s width has not be set -before the first write. See TIFFSetField(3TIFF) for -information on how to do this.

    - -

    %s: Must set "PlanarConfiguration" -before writing data. The organization of data has not be -defined before the first write. See -TIFFSetField(3TIFF) for information on how to do -this.

    - -

    %s: No space for strip arrays". There -was not enough space for the arrays that hold strip offsets -and byte counts.

    -
    - -

    SEE ALSO

    - - - - - -
    -

    TIFFOpen(3TIFF), -TIFFWriteScanline(3TIFF), -TIFFWriteRawStrip(3TIFF), -libtiff(3TIFF)

    - -

    Libtiff library home page: -http://www.remotesensing.org/libtiff/

    -
    -
    - - diff --git a/tiff/html/man/TIFFWriteEncodedTile.3tiff.html b/tiff/html/man/TIFFWriteEncodedTile.3tiff.html deleted file mode 100644 index 0e6e1ba..0000000 --- a/tiff/html/man/TIFFWriteEncodedTile.3tiff.html +++ /dev/null @@ -1,147 +0,0 @@ - - - - - - -TIFFWriteEncodedTile - - - -

    TIFFWriteEncodedTile

    -NAME
    -SYNOPSIS
    -DESCRIPTION
    -NOTES
    -RETURN VALUES
    -DIAGNOSTICS
    -SEE ALSO
    - -
    - -

    NAME

    - - - - - -
    -

    TIFFWritedEncodedTile − compress and write a -tile of data to an open TIFF file

    -
    - -

    SYNOPSIS

    - - - - - -
    -

    #include <tiffio.h>

    - -

    tsize_t TIFFWriteEncodedTile(TIFF -*tif, ttile_t tile, tdata_t -buf, tsize_t size)

    -
    - -

    DESCRIPTION

    - - - - - -
    -

    Compress size bytes of raw data from -buf and append the result to the end of the -specified tile. Note that the value of tile is a -‘‘raw tile number.’’ That is, the -caller must take into account whether or not the data are -organized in separate places (PlanarConfiguration=2). -TIFFComputeTile automatically does this when -converting an (x,y,z,sample) coordinate quadruple to a tile -number.

    -
    - -

    NOTES

    - - - - - -
    -

    The library writes encoded data using the native -machine byte order. Correctly implemented TIFF -readers are expected to do any necessary byte-swapping -to correctly process image data with BitsPerSample greater -than 8.

    -
    - -

    RETURN VALUES

    - - - - - -
    -

    −1 is returned if an error was encountered. -Otherwise, the value of size is returned.

    -
    - -

    DIAGNOSTICS

    - - - - - -
    -

    All error messages are directed to the -TIFFError(3TIFF) routine.

    - -

    %s: File not open for writing. The file was -opened for reading, not writing.

    - -

    Can not write tiles to a stripped image. The -image is assumed to be organized in strips because neither -of the TileWidth or TileLength tags have been -set with TIFFSetField(3TIFF).

    - -

    %s: Must set "ImageWidth" before -writing data. The image’s width has not be set -before the first write. See TIFFSetField(3TIFF) for -information on how to do this.

    - -

    %s: Must set "PlanarConfiguration" -before writing data. The organization of data has not be -defined before the first write. See -TIFFSetField(3TIFF) for information on how to do -this.

    - -

    %s: No space for tile arrays". There was -not enough space for the arrays that hold tile offsets and -byte counts.

    -
    - -

    SEE ALSO

    - - - - - -
    -

    TIFFOpen(3TIFF), TIFFWriteTile(3TIFF), -TIFFWriteRawTile(3TIFF), -libtiff(3TIFF)

    - -

    Libtiff library home page: -http://www.remotesensing.org/libtiff/

    -
    -
    - - diff --git a/tiff/html/man/TIFFWriteRawStrip.3tiff.html b/tiff/html/man/TIFFWriteRawStrip.3tiff.html deleted file mode 100644 index 95b4857..0000000 --- a/tiff/html/man/TIFFWriteRawStrip.3tiff.html +++ /dev/null @@ -1,144 +0,0 @@ - - - - - - -TIFFWriteRawstrip - - - -

    TIFFWriteRawstrip

    -NAME
    -SYNOPSIS
    -DESCRIPTION
    -NOTES
    -RETURN VALUES
    -DIAGNOSTICS
    -SEE ALSO
    - -
    - -

    NAME

    - - - - - -
    -

    TIFFWriteRawStrip − write a strip of raw data to an -open TIFF file

    -
    - -

    SYNOPSIS

    - - - - - -
    -

    #include <tiffio.h>

    - -

    tsize_t TIFFWriteRawStrip(TIFF *tif, -tstrip_t strip, tdata_t buf, -tsize_t size)

    -
    - -

    DESCRIPTION

    - - - - - -
    -

    Append size bytes of raw data to the specified -strip.

    -
    - -

    NOTES

    - - - - - -
    -

    The strip number must be valid according to the current -settings of the ImageLength and RowsPerStrip -tags. An image may be dynamically grown by increasing the -value of ImageLength prior to each call to -TIFFWriteRawStrip.

    -
    - -

    RETURN VALUES

    - - - - - -
    -

    −1 is returned if an error occurred. Otherwise, the -value of size is returned.

    -
    - -

    DIAGNOSTICS

    - - - - - -
    -

    All error messages are directed to the -TIFFError(3TIFF) routine.

    - -

    %s: File not open for writing. The file was opened -for reading, not writing.

    - -

    Can not write scanlines to a tiled image. The -image is assumed to be organized in tiles because the -TileWidth and TileLength tags have been set -with TIFFSetField(3TIFF).

    - -

    %s: Must set "ImageWidth" before writing -data. The image’s width has not be set before the -first write. See TIFFSetField(3TIFF) for information -on how to do this.

    - -

    %s: Must set "PlanarConfiguration" before -writing data. The organization of data has not be -defined before the first write. See -TIFFSetField(3TIFF) for information on how to do -this.

    - -

    %s: No space for strip arrays". There was not -enough space for the arrays that hold strip offsets and byte -counts.

    - -

    %s: Strip %d out of range, max %d. The specified -strip is not a valid strip according to the currently -specified image dimensions.

    -
    - -

    SEE ALSO

    - - - - - -
    -

    TIFFOpen(3TIFF), -TIFFWriteEncodedStrip(3TIFF), -TIFFWriteScanline(3TIFF), libtiff(3TIFF)

    - -

    Libtiff library home page: -http://www.remotesensing.org/libtiff/

    -
    -
    - - diff --git a/tiff/html/man/TIFFWriteRawTile.3tiff.html b/tiff/html/man/TIFFWriteRawTile.3tiff.html deleted file mode 100644 index 3d18ed1..0000000 --- a/tiff/html/man/TIFFWriteRawTile.3tiff.html +++ /dev/null @@ -1,128 +0,0 @@ - - - - - - -TIFFWriteRawtile - - - -

    TIFFWriteRawtile

    -NAME
    -SYNOPSIS
    -DESCRIPTION
    -RETURN VALUES
    -DIAGNOSTICS
    -SEE ALSO
    - -
    - -

    NAME

    - - - - - -
    -

    TIFFWriteRawTile − write a tile of raw data to an -open TIFF file

    -
    - -

    SYNOPSIS

    - - - - - -
    -

    #include <tiffio.h>

    - -

    tsize_t TIFFWriteRawTile(TIFF *tif, -ttile_t tile, tdata_t buf, -tsize_t size)

    -
    - -

    DESCRIPTION

    - - - - - -
    -

    Append size bytes of raw data to the specified -tile.

    -
    - -

    RETURN VALUES

    - - - - - -
    -

    −1 is returned if an error occurred. Otherwise, the -value of size is returned.

    -
    - -

    DIAGNOSTICS

    - - - - - -
    -

    All error messages are directed to the -TIFFError(3TIFF) routine.

    - -

    %s: File not open for writing. The file was opened -for reading, not writing.

    - -

    Can not write tiles to a stripped image. The image -is assumed to be organized in strips because neither of the -TileWidth or TileLength tags have been set -with TIFFSetField(3TIFF).

    - -

    %s: Must set "ImageWidth" before writing -data. The image’s width has not be set before the -first write. See TIFFSetField(3TIFF) for information -on how to do this.

    - -

    %s: Must set "PlanarConfiguration" before -writing data. The organization of data has not be -defined before the first write. See -TIFFSetField(3TIFF) for information on how to do -this.

    - -

    %s: No space for tile arrays". There was not -enough space for the arrays that hold tile offsets and byte -counts.

    - -

    %s: Specified tile %d out of range, max %d. The -specified tile is not valid according to the currently -specified image dimensions.

    -
    - -

    SEE ALSO

    - - - - - -
    -

    TIFFOpen(3TIFF), -TIFFWriteEncodedTile(3TIFF), -TIFFWriteScanline(3TIFF), libtiff(3TIFF)

    - -

    Libtiff library home page: -http://www.remotesensing.org/libtiff/

    -
    -
    - - diff --git a/tiff/html/man/TIFFWriteScanline.3tiff.html b/tiff/html/man/TIFFWriteScanline.3tiff.html deleted file mode 100644 index bb9323d..0000000 --- a/tiff/html/man/TIFFWriteScanline.3tiff.html +++ /dev/null @@ -1,206 +0,0 @@ - - - - - - -TIFFWriteScanline - - - -

    TIFFWriteScanline

    -NAME
    -SYNOPSIS
    -DESCRIPTION
    -NOTES
    -RETURN VALUES
    -DIAGNOSTICS
    -BUGS
    -SEE ALSO
    - -
    - -

    NAME

    - - - - - -
    -

    TIFFWriteScanline − write a scanline to an open -TIFF file

    -
    - -

    SYNOPSIS

    - - - - - -
    -

    #include <tiffio.h>

    - -

    int TIFFWriteScanline(TIFF *tif, -tdata_t buf, uint32 row, -tsample_t sample)

    -
    - -

    DESCRIPTION

    - - - - - -
    -

    Write data to a file at the specified row. The -sample parameter is used only if data are organized -in separate planes (PlanarConfiguration=2). The data -are assumed to be uncompressed and in the native bit- and -byte-order of the host machine. The data written to the file -is compressed according to the compression scheme of the -current TIFF directory (see further below). -If the current scanline is past the end of the current -subfile, the ImageLength field is automatically -increased to include the scanline (except for -PlanarConfiguration=2, where the ImageLength -cannot be changed once the first data are written). If the -ImageLength is increased, the StripOffsets and -StripByteCounts fields are similarly enlarged to -reflect data written past the previous end of image.

    -
    - -

    NOTES

    - - - - - -
    -

    The library writes encoded data using the native machine -byte order. Correctly implemented TIFF -readers are expected to do any necessary byte-swapping to -correctly process image data with BitsPerSample greater than -8. The library attempts to hide bit-ordering differences -between the image and the native machine by converting data -from the native machine order.

    - -

    In C++ the sample parameter defaults to 0.

    - -

    Once data are written to a file for the current -directory, the values of certain tags may not be altered; -see TIFFSetField(3TIFF) for more information.

    - -

    It is not possible to write scanlines to a file that uses -a tiled organization. The routine TIFFIsTiled can be -used to determine if the file is organized as tiles or -strips.

    -
    - -

    RETURN VALUES

    - - - - - -
    -

    TIFFWriteScanline returns −1 if it -immediately detects an error and 1 for a successful -write.

    -
    - -

    DIAGNOSTICS

    - - - - - -
    -

    All error messages are directed to the -TIFFError(3TIFF) routine.

    - -

    %s: File not open for writing . The file was -opened for reading, not writing.

    - -

    Can not write scanlines to a tiled image. An -attempt was made to write a scanline to a tiled image. The -image is assumed to be organized in tiles because the -TileWidth and TileLength tags have been set -with TIFFSetField(3TIFF).

    - -

    Compression algorithm does not support random -access. Data was written in a non-sequential order to a -file that uses a compression algorithm and that has -RowsPerStrip greater than one. That is, data in the -image is to be stored in a compressed form, and with -multiple rows packed into a strip. In this case, the library -does not support random access to the data. The data should -either be written as entire strips, sequentially by rows, or -the value of RowsPerStrip should be set to one.

    - -

    %s: Must set "ImageWidth" before writing -data. The image’s width has not be set before the -first write. See TIFFSetField(3TIFF) for information -on how to do this.

    - -

    %s: Must set "PlanarConfiguration" before -writing data. The organization of data has not be -defined before the first write. See -TIFFSetField(3TIFF) for information on how to do -this.

    - -

    Can not change "ImageLength" when using -separate planes. Separate image planes are being used -(PlanarConfiguration=2), but the number of rows has -not been specified before the first write. The library -supports the dynamic growth of an image only when data are -organized in a contiguous manner -(PlanarConfiguration=1).

    - -

    %d: Sample out of range, max %d. The sample -parameter was greater than the value of the SamplesPerPixel -tag.

    - -

    %s: No space for strip arrays . There was not -enough space for the arrays that hold strip offsets and byte -counts.

    -
    - -

    BUGS

    - - - - - -
    -

    Writing subsampled YCbCR data does not work correctly -because, for PlanarConfiguration=2 the size of a -scanline is not calculated on a per-sample basis, and for -PlanarConfiguration=1 the library does not pack the -block-interleaved samples.

    -
    - -

    SEE ALSO

    - - - - - -
    -

    TIFFOpen(3TIFF), -TIFFWriteEncodedStrip(3TIFF), -TIFFWriteRawStrip(3TIFF), libtiff(3TIFF)

    - -

    Libtiff library home page: -http://www.remotesensing.org/libtiff/

    -
    -
    - - diff --git a/tiff/html/man/TIFFWriteTile.3tiff.html b/tiff/html/man/TIFFWriteTile.3tiff.html deleted file mode 100644 index d6bc5d8..0000000 --- a/tiff/html/man/TIFFWriteTile.3tiff.html +++ /dev/null @@ -1,115 +0,0 @@ - - - - - - -TIFFWriteTile - - - -

    TIFFWriteTile

    -NAME
    -SYNOPSIS
    -DESCRIPTION
    -RETURN VALUES
    -DIAGNOSTICS
    -SEE ALSO
    - -
    - -

    NAME

    - - - - - -
    -

    TIFFWriteTile − encode and write a tile of data to -an open TIFF file

    -
    - -

    SYNOPSIS

    - - - - - -
    -

    #include <tiffio.h>

    - -

    tsize_t TIFFWriteTile(TIFF *tif, -tdata_t buf, uint32 x, -uint32 y, uint32 z, -tsample_t sample)

    -
    - -

    DESCRIPTION

    - - - - - -
    -

    Write the data for the tile containing the -specified coordinates. The data in buf are is -(potentially) compressed, and written to the indicated file, -normally being appended to the end of the file. The buffer -must be contain an entire tile of data. Applications should -call the routine TIFFTileSize to find out the size -(in bytes) of a tile buffer. The x and y -parameters are always used by TIFFWriteTile. The -z parameter is used if the image is deeper than 1 -slice (ImageDepth>1). The sample parameter -is used only if data are organized in separate planes -(PlanarConfiguration=2).

    -
    - -

    RETURN VALUES

    - - - - - -
    -

    TIFFWriteTile returns −1 if it detects an -error; otherwise the number of bytes in the tile is -returned.

    -
    - -

    DIAGNOSTICS

    - - - - - -
    -

    All error messages are directed to the -TIFFError(3TIFF) routine.

    -
    - -

    SEE ALSO

    - - - - - -
    -

    TIFFCheckTile(3TIFF), -TIFFComputeTile(3TIFF), TIFFOpen(3TIFF), -TIFFReadTile(3TIFF), TIFFWriteScanline(3TIFF), -TIFFWriteEncodedTile(3TIFF), -TIFFWriteRawTile(3TIFF), libtiff(3TIFF)

    - -

    Libtiff library home page: -http://www.remotesensing.org/libtiff/

    -
    -
    - - diff --git a/tiff/html/man/TIFFbuffer.3tiff.html b/tiff/html/man/TIFFbuffer.3tiff.html deleted file mode 100644 index 3d610ca..0000000 --- a/tiff/html/man/TIFFbuffer.3tiff.html +++ /dev/null @@ -1,116 +0,0 @@ - - - - - - -TIFFBUFFER - - - -

    TIFFBUFFER

    -NAME
    -SYNOPSIS
    -DESCRIPTION
    -DIAGNOSTICS
    -SEE ALSO
    - -
    - -

    NAME

    - - - - - -
    -

    TIFFReadBufferSetup, TIFFWriteBufferSetup − I/O -buffering control routines

    -
    - -

    SYNOPSIS

    - - - - - -
    -
    #include <tiffio.h>
-
-int TIFFReadBufferSetup(TIFF *tif, tdata_t buffer, tsize_t size);
-int TIFFWriteBufferSetup(TIFF *tif, tdata_t buffer, tsize_t size);
-
    -
    - -

    DESCRIPTION

    - - - - - - -
    -

    The following routines are provided for client-control of -the I/O buffers used by the library. Applications need never -use these routines; they are provided only for -‘‘intelligent clients’’ that wish to -optimize memory usage and/or eliminate potential copy -operations that can occur when working with images that have -data stored without compression.

    - -

    TIFFReadBufferSetup sets up the data buffer used -to read raw (encoded) data from a file. If the specified -pointer is NULL (zero), then a buffer of the -appropriate size is allocated. Otherwise the caller must -guarantee that the buffer is large enough to hold any -individual strip of raw data. TIFFReadBufferSetup -returns a non-zero value if the setup was successful and -zero otherwise.

    - -

    TIFFWriteBufferSetup sets up the data buffer used -to write raw (encoded) data to a file. If the specified -size is −1 then the buffer size is selected to -hold a complete tile or strip, or at least 8 kilobytes, -whichever is greater. If the specified buffer is -NULL (zero), then a buffer of the appropriate -size is dynamically allocated. TIFFWriteBufferSetup -returns a non-zero value if the setup was successful and -zero otherwise.

    -
    - -

    DIAGNOSTICS

    - - - - - -
    -

    %s: No space for data buffer at scanline %ld. -TIFFReadBufferSetup was unable to dynamically -allocate space for a data buffer.

    - -

    %s: No space for output buffer. -TIFFWriteBufferSetup was unable to dynamically -allocate space for a data buffer.

    -
    - -

    SEE ALSO

    - - - - - -
    -

    libtiff(3TIFF)

    - -

    Libtiff library home page: -http://www.remotesensing.org/libtiff/

    -
    -
    - - diff --git a/tiff/html/man/TIFFcodec.3tiff.html b/tiff/html/man/TIFFcodec.3tiff.html deleted file mode 100644 index 8567b30..0000000 --- a/tiff/html/man/TIFFcodec.3tiff.html +++ /dev/null @@ -1,116 +0,0 @@ - - - - - - -CODEC - - - -

    CODEC

    -NAME
    -SYNOPSIS
    -DESCRIPTION
    -DIAGNOSTICS
    -SEE ALSO
    - -
    - -

    NAME

    - - - - - -
    -

    TIFFFindCODEC, TIFFRegisterCODEC, TIFFUnRegisterCODEC, -TIFFIsCODECConfigured − codec-related utility -routines

    -
    - -

    SYNOPSIS

    - - - - - -
    -

    #include <tiffio.h>

    - -

    const TIFFCodec* TIFFFindCODEC(uint16 -scheme);
    -TIFFCodec* TIFFRegisterCODEC(uint16     scheme, -const char *method, TIFFInitMethod -init);
    -void TIFFUnRegisterCODEC(TIFFCodec -*    codec);
    -int TIFFIsCODECConfigured(uint16     -scheme);

    -
    - -

    DESCRIPTION

    - - - - - -
    -

    libtiff supports a variety of compression schemes -implemented by software codecs. Each codec adheres to -a modular interface that provides for the decoding and -encoding of image data; as well as some other methods for -initialization, setup, cleanup, and the control of default -strip and tile sizes. Codecs are identified by the -associated value of the TIFF -Compression tag; e.g. 5 for LZW -compression.

    - -

    The TIFFRegisterCODEC routine can be used to -augment or override the set of codecs available to an -application. If the specified scheme already has a -registered codec then it is overridden and any images -with data encoded with this compression scheme will be -decoded using the supplied coded.

    - -

    TIFFIsCODECConfigured returns 1 if the codec is -configured and working. Otherwise 0 will be returned.

    -
    - -

    DIAGNOSTICS

    - - - - - -
    -

    No space to register compression scheme %s. -TIFFRegisterCODEC was unable to allocate memory for -the data structures needed to register a codec.

    - -

    Cannot remove compression scheme %s; not -registered. TIFFUnRegisterCODEC did not locate -the specified codec in the table of registered compression -schemes.

    -
    - -

    SEE ALSO

    - - - - - -
    -

    libtiff(3TIFF)

    - -

    Libtiff library home page: -http://www.remotesensing.org/libtiff/

    -
    -
    - - diff --git a/tiff/html/man/TIFFcolor.3tiff.html b/tiff/html/man/TIFFcolor.3tiff.html deleted file mode 100644 index 7e4eea5..0000000 --- a/tiff/html/man/TIFFcolor.3tiff.html +++ /dev/null @@ -1,975 +0,0 @@ - - - - - - -COLOR - - - -

    COLOR

    -NAME
    -SYNOPSIS
    -DESCRIPTION
    -SEE ALSO
    - -
    - -

    NAME

    - - - - - -
    -

    TIFFYCbCrToRGBInit, TIFFYCbCrtoRGB, TIFFCIELabToRGBInit, -TIFFCIELabToXYZ, TIFFXYZToRGB − color conversion -routines.

    -
    - -

    SYNOPSIS

    - - - - - -
    -

    #include <tiffio.h>

    - -

    int TIFFYCbCrToRGBInit(TIFFYCbCrToRGB -*ycbcr, float *luma, float -*refBlackWhite");"
    -void TIFFYCbCrtoRGB(TIFFYCbCrToRGB *    ycbcr, -uint32 Y, int32 Cb, int32 -Cr, uint32 *R, uint32 -*G, uint32 *B );

    - -

    int TIFFCIELabToRGBInit(TIFFCIELabToRGB -*cielab, TIFFDisplay *display, -float *refWhite);
    -void TIFFCIELabToXYZ(TIFFCIELabToRGB *    cielab, -uint32 L, int32 a, int32 -b, float *X, float *Y, -float *Z);
    -void TIFFXYZToRGB(TIFFCIELabToRGB *    cielab, -float X, float Y, float -Z",uint32*"R, -uint32 *G, uint32 *B);

    -
    - -

    DESCRIPTION

    - - - - - -
    -

    TIFF supports several color spaces for images stored in -that format. There is usually a problem of application to -handle the data properly and convert between different -colorspaces for displaying and printing purposes. To -simplify this task libtiff implements several color -conversion routines itself. In particular, these routines -used in TIFFRGBAImage(3TIFF) interface.

    - -

    TIFFYCbCrToRGBInit() used to initialize -YCbCr to RGB conversion state. Allocating and -freeing of the ycbcr structure belongs to programmer. -TIFFYCbCrToRGB defined in tiffio.h as

    -
    - - - - - -
    -
    typedef struct {                /* YCbCr->RGB support */
-        TIFFRGBValue* clamptab; /* range clamping table */
-
    -
    - - - - - -

    int*

    - - - - - - - - - - - - - - - - - - - - - - - -
    - -

    Cr_r_tab;
    -int*

    -    		 -
    - -

    Cb_b_tab;
    -int32*

    -    		 -
    - -

    Cr_g_tab;
    -int32*

    -    		 -
    - -

    Cb_g_tab;

    -    		 -
    - - - - - -
    -

    int32* Y_tab;
    -} TIFFYCbCrToRGB;

    - - - - - -
    -

    luma is a float array of three values representing -proportions of the red, green and blue in luminance, Y (see -section 21 of the TIFF 6.0 specification, where the YCbCr -images discussed). TIFFTAG_YCBCRCOEFFICIENTS holds -that values in TIFF file. refBlackWhite is a float -array of 6 values which specifies a pair of headroom and -footroom image data values (codes) for each image component -(see section 20 of the TIFF 6.0 specification where the -colorinmetry fields discussed). -TIFFTAG_REFERENCEBLACKWHITE is responsible for -storing these values in TIFF file. Following code snippet -should helps to understand the the technique:

    -
    - - - - - -
    -
    float *luma, *refBlackWhite;
-uint16 hs, vs;
-
-/* Initialize structures */
-ycbcr = (TIFFYCbCrToRGB*)
-
    -
    - - - - - - - - - - - - - - - -
    - -

    _TIFFmalloc(TIFFroundup(sizeof(TIFFYCbCrToRGB), -sizeof(long))

    -
    - -

    + 4*256*sizeof(TIFFRGBValue)

    -
    - -

    + 2*256*sizeof(int)

    -
    - -

    + 3*256*sizeof(int32));

    -
    - - - - - -
    -

    if (ycbcr == NULL) {
    -TIFFError("YCbCr->RGB",

    - - - - - - - -
    - - -

    "No space for YCbCr->RGB conversion -state");

    -    		 -
    - - - - - -
    -

    exit(0);
    -}

    - -

    TIFFGetFieldDefaulted(tif, TIFFTAG_YCBCRCOEFFICIENTS, -&luma);
    -TIFFGetFieldDefaulted(tif, TIFFTAG_REFERENCEBLACKWHITE, -&refBlackWhite);
    -if (TIFFYCbCrToRGBInit(ycbcr, luma, refBlackWhite) < -0)

    - - - - - -
    - -

    exit(0);

    -
    - - - - - -
    -

    /* Start conversion */
    -uint32 r, g, b;
    -uint32 Y;
    -int32 Cb, Cr;

    - -

    for each pixel in image

    - - - - - -
    - -

    TIFFYCbCrtoRGB(img->ycbcr, Y, Cb, Cr, &r, &g, -&b);

    -
    - - - - - -
    -

    /* Free state structure */
    -_TIFFfree(ycbcr);

    - - - - - -
    -

    TIFFCIELabToRGBInit() initializes the CIE -L*a*b* 1976 to RGB conversion state. -TIFFCIELabToRGB defined as

    -
    - - - - - -
    -
    #define CIELABTORGB_TABLE_RANGE 1500
-
-
    -
    - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
    - -

    typedef struct {

    -    		 - - -

    /* CIE Lab 1976->RGB support */

    -    		 -
    - - -

    int

    -    		 - -

    range;

    -    		 - - -

    /* Size of conversion table */

    -    		 -
    - - -

    float

    -    		 - -

    rstep, gstep, bstep;

    -    		 -
    - - -

    float

    -    		 - -

    X0, Y0, Z0;

    -    		 - -

    /* Reference white point */

    -    		 -
    - -

    TIFFDisplay display;

    -    		 -
    - - -

    float

    -    		 - -

    Yr2r[CIELABTORGB_TABLE_RANGE + 1]; /* Conversion of Yr -to r */

    -    		 -
    - - -

    float

    -    		 - -

    Yg2g[CIELABTORGB_TABLE_RANGE + 1]; /* Conversion of Yg -to g */

    -    		 -
    - - -

    float

    -    		 - -

    Yb2b[CIELABTORGB_TABLE_RANGE + 1]; /* Conversion of Yb -to b */

    -    		 -
    - - - - - -
    -

    } TIFFCIELabToRGB;

    - - - - - -
    -

    display is a display device description, declared -as

    -
    - - - - - -
    -
    typedef struct {
-
    -
    - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
    - -

    float d_mat[3][3]; /* XYZ -> luminance matrix */

    -
    - -

    float d_YCR; /* Light o/p for reference white */

    -
    - -

    float d_YCG;

    -
    - -

    float d_YCB;

    -
    - -

    uint32 d_Vrwr; /* Pixel values for ref. white */

    -
    - -

    uint32 d_Vrwg;

    -
    - -

    uint32 d_Vrwb;

    -
    - -

    float d_Y0R; /* Residual light for black pixel */

    -
    - -

    float d_Y0G;

    -
    - -

    float d_Y0B;

    -
    - -

    float d_gammaR; /* Gamma values for the three guns -*/

    -
    - -

    float d_gammaG;

    -
    - -

    float d_gammaB;

    -
    - - - - - -
    -

    } TIFFDisplay;

    - - - - - -
    -

    For example, the one can use sRGB device, which has the -following parameters:

    -
    - - - - - -
    -
    TIFFDisplay display_sRGB = {
-
    -
    - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
    - -

    { /* XYZ -> luminance matrix */

    -    		 -
    - - -

    { 3.2410F, -1.5374F, -0.4986F },

    -    		 -
    - - -

    { -0.9692F, 1.8760F, 0.0416F },

    -    		 -
    - - -

    { 0.0556F, -0.2040F, 1.0570F }

    -    		 -
    - -

    },

    -    		 - -
    - -

    100.0F, 100.0F, 100.0F, /* Light o/p for reference white -*/

    -    		 -
    - -

    255, 255, 255, /* Pixel values for ref. white */

    -    		 -
    - -

    1.0F, 1.0F, 1.0F, /* Residual light o/p for black pixel -*/

    -    		 -
    - -

    2.4F, 2.4F, 2.4F, /* Gamma values for the three guns -*/

    -    		 -
    - - - - - -
    -

    };

    - - - - - -
    -

    refWhite is a color temperature of the reference -white. The TIFFTAG_WHITEPOINT contains the -chromaticity of the white point of the image from where the -reference white can be calculated using following -formulae:

    -
    - - - - - -
    -

    refWhite_Y = 100.0
    -refWhite_X = whitePoint_x / whitePoint_y * refWhite_Y
    -refWhite_Z = (1.0 - whitePoint_x - whitePoint_y) / -whitePoint_y * refWhite_X

    - - - - - -
    -

    The conversion itself performed in two steps: at the -first one we will convert CIE L*a*b* 1976 to CIE -XYZ using TIFFCIELabToXYZ() routine, and at the -second step we will convert CIE XYZ to RGB -using TIFFXYZToRGB(). Look at the code sample -below:

    -
    - - - - - -
    -
    float   *whitePoint;
-float   refWhite[3];
-
-/* Initialize structures */
-img->cielab = (TIFFCIELabToRGB *)
-
    -
    - - - - - - -
    - -

    _TIFFmalloc(sizeof(TIFFCIELabToRGB));

    -
    - - - - - -
    -

    if (!cielab) {

    - - - - - - - - - - - - - - - - - - - - -
    - -

    TIFFError("CIE L*a*b*->RGB",

    -    		 -
    - - -

    "No space for CIE L*a*b*->RGB conversion -state.");

    -    		 -
    - -

    exit(0);

    -    		 -
    - - - - - -
    -

    }

    - -

    TIFFGetFieldDefaulted(tif, TIFFTAG_WHITEPOINT, -&whitePoint);
    -refWhite[1] = 100.0F;
    -refWhite[0] = whitePoint[0] / whitePoint[1] * -refWhite[1];
    -refWhite[2] = (1.0F - whitePoint[0] - -whitePoint[1])

    - - - - - -
    - -

    / whitePoint[1] * refWhite[1];

    -
    - - - - - -
    -

    if (TIFFCIELabToRGBInit(cielab, &display_sRGB, -refWhite) < 0) {

    - - - - - - - - - - - - - - - - - - - - - - - - - - -
    - -

    TIFFError("CIE L*a*b*->RGB",

    -    		 -
    - - -

    "Failed to initialize CIE L*a*b*->RGB conversion -state.");

    -    		 -
    - -

    _TIFFfree(cielab);

    -    		 -
    - -

    exit(0);

    -    		 -
    - - - - - -
    -

    }

    - -

    /* Now we can start to convert */
    -uint32 r, g, b;
    -uint32 L;
    -int32 a, b;
    -float X, Y, Z;

    - -

    for each pixel in image

    - - - - - - - - -
    - -

    TIFFCIELabToXYZ(cielab, L, a, b, &X, &Y, -&Z);

    -
    - -

    TIFFXYZToRGB(cielab, X, Y, Z, &r, &g, -&b);

    -
    - - - - - -
    -

    /* Don’t forget to free the state structure */
    -_TIFFfree(cielab);

    - -

    SEE ALSO

    - - - - - -
    -

    TIFFRGBAImage(3TIFF) libtiff(3TIFF),

    - -

    Libtiff library home page: -http://www.remotesensing.org/libtiff/

    -
    -
    - - diff --git a/tiff/html/man/TIFFmemory.3tiff.html b/tiff/html/man/TIFFmemory.3tiff.html deleted file mode 100644 index 746b5ec..0000000 --- a/tiff/html/man/TIFFmemory.3tiff.html +++ /dev/null @@ -1,110 +0,0 @@ - - - - - - -MEMORY - - - -

    MEMORY

    -NAME
    -SYNOPSIS
    -DESCRIPTION
    -DIAGNOSTICS
    -SEE ALSO
    - -
    - -

    NAME

    - - - - - -
    -

    _TIFFmalloc, _TIFFrealloc, _TIFFfree, _TIFFmemset, -_TIFFmemcpy, _TIFFmemcmp, − memory management-related -functions for use with TIFF files

    -
    - -

    SYNOPSIS

    - - - - - -
    -

    #include <tiffio.h>

    - -

    tdata_t _TIFFmalloc(tsize_t size);
    -tdata_t _TIFFrealloc(tdata_t     buffer, -tsize_t size);
    -void _TIFFfree(tdata_t     buffer);
    -void _TIFFmemset(tdata_t     s, int -c, tsize_t n);
    -void _TIFFmemcpy(tdata_t     dest, const -tdata_t src, tsize_t n);
    -int _TIFFmemcmp(const tdata_t     s1, const -tdata_t s2, tsize_t n);

    -
    - -

    DESCRIPTION

    - - - - - -
    -

    These routines are provided for writing portable software -that uses libtiff; they hide any memory-management -related issues, such as dealing with segmented architectures -found on 16-bit machines.

    - -

    _TIFFmalloc and _TIFFrealloc are used to -dynamically allocate and reallocate memory used by -libtiff; such as memory passed into the I/O routines. -Memory allocated through these interfaces is released back -to the system using the _TIFFfree routine.

    - -

    Memory allocated through one of the above interfaces can -be set to a known value using _TIFFmemset, copied to -another memory location using _TIFFmemcpy, or -compared for equality using _TIFFmemcmp. These -routines conform to the equivalent ANSI C -routines: memset, memcpy, and memcmp, -repsectively.

    -
    - -

    DIAGNOSTICS

    - - - - - -
    -

    None.

    -
    - -

    SEE ALSO

    - - - - - -
    -

    malloc(3), memory(3), -libtiff(3TIFF)

    - -

    Libtiff library home page: -http://www.remotesensing.org/libtiff/

    -
    -
    - - diff --git a/tiff/html/man/TIFFquery.3tiff.html b/tiff/html/man/TIFFquery.3tiff.html deleted file mode 100644 index e27354a..0000000 --- a/tiff/html/man/TIFFquery.3tiff.html +++ /dev/null @@ -1,148 +0,0 @@ - - - - - - -QUERY - - - -

    QUERY

    -NAME
    -SYNOPSIS
    -DESCRIPTION
    -DIAGNOSTICS
    -SEE ALSO
    - -
    - -

    NAME

    - - - - - -
    -

    TIFFCurrentRow, TIFFCurrentStrip, TIFFCurrentTile, -TIFFCurrentDirectory, TIFFLastDirectory, TIFFFileno, -TIFFFileName, TIFFGetMode, TIFFIsTiled, TIFFIsByteSwapped, -TIFFIsUpSampled, TIFFIsMSB2LSB, TIFFGetVersion − query -routines

    -
    - -

    SYNOPSIS

    - - - - - -
    -

    #include <tiffio.h>

    - -

    uint32 TIFFCurrentRow(TIFF* tif)
    -tstrip_t TIFFCurrentStrip(TIFF*     tif)
    -ttile_t TIFFCurrentTile(TIFF*     tif)
    -tdir_t TIFFCurrentDirectory(TIFF*     tif)
    -int TIFFLastDirectory(TIFF*     tif)
    -int TIFFFileno(TIFF*     tif)
    -char* TIFFFileName(TIFF*     tif)
    -int TIFFGetMode(TIFF*     tif)
    -int TIFFIsTiled(TIFF*     tif)
    -int TIFFIsByteSwapped(TIFF*     tif)
    -int TIFFIsUpSampled(TIFF*     tif)
    -int TIFFIsMSB2LSB(TIFF*     tif)
    -const char* TIFFGetVersion(void)

    -
    - -

    DESCRIPTION

    - - - - - -
    -

    The following routines return status information about an -open TIFF file.

    - -

    TIFFCurrentDirectory returns the index of the -current directory (directories are numbered starting at 0). -This number is suitable for use with the -TIFFSetDirectory routine.

    - -

    TIFFLastDirectory returns a non-zero value if the -current directory is the last directory in the file; -otherwise zero is returned.

    - -

    TIFFCurrentRow, TIFFCurrentStrip, and -TIFFCurrentTile, return the current row, strip, and -tile, respectively, that is being read or written. These -values are updated each time a read or write is done.

    - -

    TIFFFileno returns the underlying file descriptor -used to access the TIFF image in the -filesystem.

    - -

    TIFFFileName returns the pathname argument passed -to TIFFOpen or TIFFFdOpen.

    - -

    TIFFGetMode returns the mode with which the -underlying file was opened. On UNIX systems, -this is the value passed to the open(2) system -call.

    - -

    TIFFIsTiled returns a non-zero value if the image -data has a tiled organization. Zero is returned if the image -data is organized in strips.

    - -

    TIFFIsByteSwapped returns a non-zero value if the -image data was in a different byte-order than the host -machine. Zero is returned if the TIFF file and local host -byte-orders are the same. Note that TIFFReadTile(), -TIFFReadStrip() and TIFFReadScanline() functions already -normally perform byte swapping to local host order if -needed.

    - -

    TIFFIsUpSampled returns a non-zero value if image -data returned through the read interface routines is being -up-sampled. This can be useful to applications that want to -calculate I/O buffer sizes to reflect this usage (though the -usual strip and tile size routines already do this).

    - -

    TIFFIsMSB2LSB returns a non-zero value if the -image data is being returned with bit 0 as the most -significant bit.

    - -

    TIFFGetVersion returns an ASCII -string that has a version stamp for the TIFF -library software.

    -
    - -

    DIAGNOSTICS

    - - - - - -
    -

    None.

    -
    - -

    SEE ALSO

    - - - - - -
    -

    libtiff(3TIFF), TIFFOpen(3TIFF), -TIFFFdOpen(3TIFF)

    -
    -
    - - diff --git a/tiff/html/man/TIFFsize.3tiff.html b/tiff/html/man/TIFFsize.3tiff.html deleted file mode 100644 index 54fb71b..0000000 --- a/tiff/html/man/TIFFsize.3tiff.html +++ /dev/null @@ -1,95 +0,0 @@ - - - - - - -TIFFSIZE - - - -

    TIFFSIZE

    -NAME
    -SYNOPSIS
    -DESCRIPTION
    -DIAGNOSTICS
    -SEE ALSO
    - -
    - -

    NAME

    - - - - - -
    -

    TIFFScanlineSize, TIFFRasterScanlineSize, − return -the size of various items associated with an open -TIFF file

    -
    - -

    SYNOPSIS

    - - - - - -
    -

    #include <tiffio.h>

    - -

    tsize_t TIFFRasterScanlineSize(TIFF -*tif)
    -tsize_t TIFFScanlineSize(TIFF *    tif)

    -
    - -

    DESCRIPTION

    - - - - - -
    -

    TIFFScanlineSize returns the size in bytes of a -row of data as it would be returned in a call to -TIFFReadScanline, or as it would be expected in a -call to TIFFWriteScanline.

    - -

    TIFFRasterScanlineSize returns the size in bytes -of a complete decoded and packed raster scanline. Note that -this value may be different from the value returned by -TIFFScanlineSize if data is stored as separate -planes.

    -
    - -

    DIAGNOSTICS

    - - - - - -
    -

    None.

    -
    - -

    SEE ALSO

    - - - - - -
    -

    TIFFOpen(3TIFF), TIFFReadScanline(3TIFF), -libtiff(3TIFF)

    - -

    Libtiff library home page: -http://www.remotesensing.org/libtiff/

    -
    -
    - - diff --git a/tiff/html/man/TIFFstrip.3tiff.html b/tiff/html/man/TIFFstrip.3tiff.html deleted file mode 100644 index a0fc358..0000000 --- a/tiff/html/man/TIFFstrip.3tiff.html +++ /dev/null @@ -1,129 +0,0 @@ - - - - - - -TIFFSTRIP - - - -

    TIFFSTRIP

    -NAME
    -SYNOPSIS
    -DESCRIPTION
    -DIAGNOSTICS
    -SEE ALSO
    - -
    - -

    NAME

    - - - - - -
    -

    TIFFDefaultStripSize, TIFFStripSize, TIFFVStripSize, -TIFFRawStripSize, TIFFComputeStrip, TIFFNumberOfStrips -− strip-related utility routines

    -
    - -

    SYNOPSIS

    - - - - - -
    -

    #include <tiffio.h>

    - -

    uint32 TIFFDefaultStripSize(TIFF *tif, -uint32 estimate)
    -tsize_t TIFFStripSize(TIFF *    tif)
    -tsize_t TIFFVStripSize(TIFF *    tif, uint32 -nrows)
    -tsize_t TIFFRawStripSize(TIFF *    tif, -tstrip_t strip)
    -tstrip_t TIFFComputeStrip(TIFF *    tif, -uint32 row, tsample_t -sample)
    -tstrip_t TIFFNumberOfStrips(TIFF *    tif)

    -
    - -

    DESCRIPTION

    - - - - - -
    -

    TIFFDefaultStripSize returns the number of rows -for a reasonable-sized strip according to the current -settings of the ImageWidth, BitsPerSample, -SamplesPerPixel, tags and any compression-specific -requirements. If the estimate parameter, if non-zero, -then it is taken as an estimate of the desired strip size -and adjusted according to any compression-specific -requirements. The value returned by this function is -typically used to define the RowsPerStrip tag. In -lieu of any unusual requirements TIFFDefaultStripSize -tries to create strips that have approximately 8 kilobytes -of uncompressed data.

    - -

    TIFFStripSize returns the equivalent size for a -strip of data as it would be returned in a call to -TIFFReadEncodedStrip or as it would be expected in a -call to TIFFWriteEncodedStrip.

    - -

    TIFFVStripSize returns the number of bytes in a -strip with nrows rows of data.

    - -

    TIFFRawStripSize returns the number of bytes in a -raw strip (i.e. not decoded).

    - -

    TIFFComputeStrip returns the strip that contains -the specified coordinates. A valid strip is always returned; -out-of-range coordinate values are clamped to the bounds of -the image. The row parameter is always used in -calculating a strip. The sample parameter is used -only if data are organized in separate planes -(PlanarConfiguration=2).

    - -

    TIFFNumberOfStrips returns the number of strips in -the image.

    -
    - -

    DIAGNOSTICS

    - - - - - -
    -

    None.

    -
    - -

    SEE ALSO

    - - - - - -
    -

    TIFFReadEncodedStrip(3TIFF), -TIFFReadRawStrip(3TIFF), -TIFFWriteEncodedStrip(3TIFF), -TIFFWriteRawStrip(3TIFF), libtiff(3TIFF),

    - -

    Libtiff library home page: -http://www.remotesensing.org/libtiff/

    -
    -
    - - diff --git a/tiff/html/man/TIFFswab.3tiff.html b/tiff/html/man/TIFFswab.3tiff.html deleted file mode 100644 index 2924a38..0000000 --- a/tiff/html/man/TIFFswab.3tiff.html +++ /dev/null @@ -1,110 +0,0 @@ - - - - - - -SWAB - - - -

    SWAB

    -NAME
    -SYNOPSIS
    -DESCRIPTION
    -DIAGNOSTICS
    -SEE ALSO
    - -
    - -

    NAME

    - - - - - -
    -

    TIFFGetBitRevTable, TIFFReverseBits, TIFFSwabShort, -TIFFSwabLong, TIFFSwabArrayOfShort, TIFFSwabArrayOfLong -− byte- and bit-swapping routines

    -
    - -

    SYNOPSIS

    - - - - - -
    -

    #include <tiffio.h>

    - -

    const unsigned char* TIFFGetBitRevTable(int -reversed)
    -void TIFFReverseBits(u_char *    data, unsigned -long nbytes)
    -void TIFFSwabShort(uint16 *    data)
    -void TIFFSwabLong(uint32 *    data)
    -void TIFFSwabArrayOfShort(uint16 *    data, -unsigned long nshorts)
    -void TIFFSwabArrayOfLong(uint32 *    data, -unsigned long nlongs)

    -
    - -

    DESCRIPTION

    - - - - - -
    -

    The following routines are used by the library to swap -16- and 32-bit data and to reverse the order of bits in -bytes.

    - -

    TIFFSwabShort and TIFFSwabLong swap the -bytes in a single 16-bit and 32-bit item, respectively. -TIFFSwabArrayOfShort and TIFFSwabArrayOfLong -swap the bytes in an array of 16-bit and 32-bit items, -respectively.

    - -

    TIFFReverseBits replaces each byte in data -with the equivalent bit-reversed value. This operation is -performed with a lookup table, which is returned using the -TIFFGetBitRevTable function. reversed -parameter specifies which table should be returned. Supply -1 if you want bit reversal table. Supply 0 to -get the table that do not reverse bit values. It is a lookup -table that can be used as an identity function; i.e. -TIFFNoBitRevTable[n] == n.

    -
    - -

    DIAGNOSTICS

    - - - - - -
    -

    None.

    -
    - -

    SEE ALSO

    - - - - - -
    -

    libtiff(3TIFF)

    - -

    Libtiff library home page: -http://www.remotesensing.org/libtiff/

    -
    -
    - - diff --git a/tiff/html/man/TIFFtile.3tiff.html b/tiff/html/man/TIFFtile.3tiff.html deleted file mode 100644 index e8e0008..0000000 --- a/tiff/html/man/TIFFtile.3tiff.html +++ /dev/null @@ -1,141 +0,0 @@ - - - - - - -TIFFTILE - - - -

    TIFFTILE

    -NAME
    -SYNOPSIS
    -DESCRIPTION
    -DIAGNOSTICS
    -SEE ALSO
    - -
    - -

    NAME

    - - - - - -
    -

    TIFFTileSize, TIFFTileRowSize, TIFFVTileSize, -TIFFDefaultTileSize, TIFFComputeTile, TIFFCheckTile, -TIFFNumberOfTiles − tile-related utility routines

    -
    - -

    SYNOPSIS

    - - - - - -
    -

    #include <tiffio.h>

    - -

    void TIFFDefaultTileSize(TIFF *tif, -uint32 *tw, uint32 *th)
    -tsize_t TIFFTileSize(TIFF *    tif)
    -tsize_t TIFFTileRowSize(TIFF *    tif)
    -tsize_t TIFFVTileSize(TIFF *    tif, uint32 -nrows)
    -ttile_t TIFFComputeTile(TIFF *    tif, uint32 -x, uint32 y, uint32 z, -tsample_t sample)
    -int TIFFCheckTile(TIFF *    tif, uint32 -x, uint32 y, uint32 z, -tsample_t sample)
    -ttile_t TIFFNumberOfTiles(TIFF *    tif)

    -
    - -

    DESCRIPTION

    - - - - - -
    -

    TIFFDefaultTileSize returns the pixel width and -height of a reasonable-sized tile; suitable for setting up -the TileWidth and TileLength tags. If the -tw and th values passed in are non-zero, then -they are adjusted to reflect any compression-specific -requirements. The returned width and height are constrained -to be a multiple of 16 pixels to conform with the -TIFF specification.

    - -

    TIFFTileSize returns the equivalent size for a -tile of data as it would be returned in a call to -TIFFReadTile or as it would be expected in a call to -TIFFWriteTile.

    - -

    TIFFVTileSize returns the number of bytes in a -row-aligned tile with nrows of data.

    - -

    TIFFTileRowSize returns the number of bytes of a -row of data in a tile.

    - -

    TIFFComputeTile returns the tile that contains the -specified coordinates. A valid tile is always returned; -out-of-range coordinate values are clamped to the bounds of -the image. The x and y parameters are always -used in calculating a tile. The z parameter is used -if the image is deeper than 1 slice -(ImageDepth>1). The sample parameter is -used only if data are organized in separate planes -(PlanarConfiguration=2).

    - -

    TIFFCheckTile returns a non-zero value if the -supplied coordinates are within the bounds of the image and -zero otherwise. The x parameter is checked against -the value of the ImageWidth tag. The y -parameter is checked against the value of the -ImageLength tag. The z parameter is checked -against the value of the ImageDepth tag (if defined). -The sample parameter is checked against the value of -the SamplesPerPixel parameter if the data are -organized in separate planes.

    - -

    TIFFNumberOfTiles returns the number of tiles in -the image.

    -
    - -

    DIAGNOSTICS

    - - - - - -
    -

    None.

    -
    - -

    SEE ALSO

    - - - - - -
    -

    TIFFReadEncodedTile(3TIFF), -TIFFReadRawTile(3TIFF), TIFFReadTile(3TIFF), -TIFFWriteEncodedTile(3TIFF), -TIFFWriteRawTile(3TIFF), TIFFWriteTile(3TIFF), -libtiff(3TIFF)

    - -

    Libtiff library home page: -http://www.remotesensing.org/libtiff/

    -
    -
    - - diff --git a/tiff/html/man/fax2ps.1.html b/tiff/html/man/fax2ps.1.html deleted file mode 100644 index c539614..0000000 --- a/tiff/html/man/fax2ps.1.html +++ /dev/null @@ -1,252 +0,0 @@ - - - - - - -FAX2PS - - - -

    FAX2PS

    -NAME
    -SYNOPSIS
    -DESCRIPTION
    -OPTIONS
    -DIAGNOSTICS
    -NOTES
    -BUGS
    -SEE ALSO
    - -
    - -

    NAME

    - - - - - -
    -

    fax2ps − convert a TIFF facsimile to -compressed PostScript™

    -
    - -

    SYNOPSIS

    - - - - - -
    -

    fax2ps [ options ] [ file ... ]

    -
    - -

    DESCRIPTION

    - - - - - -
    -

    fax2ps reads one or more TIFF -facsimile image files and prints a compressed form of -PostScript on the standard output that is suitable for -printing.

    - -

    By default, each page is scaled to reflect the image -dimensions and resolutions stored in the file. The -−x and −y options can be used to -specify the horizontal and vertical image resolutions -(lines/inch), respectively. If the −S option is -specified, each page is scaled to fill an output page. The -default output page is 8.5 by 11 inches. Alternate page -dimensions can be specified in inches with the -−W and −H options.

    - -

    By default fax2ps generates PostScript for all -pages in the file. The −p option can be used to -select one or more pages from a multi-page document.

    - -

    fax2ps generates a compressed form of PostScript -that is optimized for sending pages of text to a PostScript -printer attached to a host through a low-speed link (such as -a serial line). Each output page is filled with white and -then only the black areas are drawn. The PostScript -specification of the black drawing operations is optimized -by using a special font that encodes the move-draw -operations required to fill the black regions on the page. -This compression scheme typically results in a substantially -reduced PostScript description, relative to the -straightforward imaging of the page with a PostScript -image operator. This algorithm can, however, be -ineffective for continuous-tone and white-on-black images. -For these images, it sometimes is more efficient to send the -raster bitmap image directly; see tiff2ps(1).

    -
    - -

    OPTIONS

    - - - - - - - -
    - -

    −p number

    -    		 - -

    Print only the indicated page. Multiple pages may be -printed by specifying this option more than once.

    -    		 -
    - - - - - -
    -

    −x resolution

    - - - - - -
    -

    Use resolution as the horizontal resolution, in -dots/inch, of the image data. By default this value is taken -from the file.

    -
    - - - - - -
    -

    −y resolution

    - - - - - -
    -

    Use resolution as the vertical resolution, in -lines/inch, of the image data. By default this value is -taken from the file.

    -
    - - - - - - - - - - - - - - - - - -
    - -

    −S

    -    		 - -

    Scale each page of image data to fill the output page -dimensions. By default images are presented according to the -dimension information recorded in the TIFF -file.

    -    		 -
    - -

    −W width

    -    		 - -

    Use width as the width, in inches, of the output -page.

    -    		 -
    - -

    −H height

    -    		 - -

    Use height as the height, in inches, of the -output page.

    -    		 -
    - -

    DIAGNOSTICS

    - - - - - -
    -

    Some messages about malformed TIFF images -come from the TIFF library.

    - -

    Various messages about badly formatted facsimile images -may be generated due to transmission errors in received -facsimile. fax2ps attempts to recover from such data -errors by resynchronizing decoding at the end of the current -scanline. This can result in long horizontal black lines in -the resultant PostScript image.

    -
    - -

    NOTES

    - - - - - -
    -

    If the destination printer supports PostScript Level II -then it is always faster to just send the encoded bitmap -generated by the tiff2ps(1) program.

    -
    - -

    BUGS

    - - - - - -
    -

    fax2ps should probably figure out when it is doing -a poor job of compressing the output and just generate -PostScript to image the bitmap raster instead.

    -
    - -

    SEE ALSO

    - - - - - -
    -

    tiff2ps(1), libtiff(3)

    - -

    Libtiff library home page: -http://www.remotesensing.org/libtiff/

    -
    -
    - - diff --git a/tiff/html/man/fax2tiff.1.html b/tiff/html/man/fax2tiff.1.html deleted file mode 100644 index 38b54c0..0000000 --- a/tiff/html/man/fax2tiff.1.html +++ /dev/null @@ -1,607 +0,0 @@ - - - - - - -FAX2TIFF - - - -

    FAX2TIFF

    -NAME
    -SYNOPSIS
    -DESCRIPTION
    -OPTIONS
    -DIAGNOSTICS
    -BUGS
    -SEE ALSO
    - -
    - -

    NAME

    - - - - - -
    -

    fax2tiff − create a TIFF Class F fax -file from raw fax data

    -
    - -

    SYNOPSIS

    - - - - - -
    -

    fax2tiff [ options ] [ −o -output.tif ] input.raw

    -
    - -

    DESCRIPTION

    - - - - - -
    -

    Fax2tiff creates a TIFF file -containing CCITT Group 3 or Group 4 encoded -data from one or more files containing -‘‘raw’’ Group 3 or Group 4 encoded -data (typically obtained directly from a fax modem). By -default, each row of data in the resultant -TIFF file is 1-dimensionally encoded and -padded or truncated to 1728 pixels, as needed. The resultant -image is a set of low resolution (98 lines/inch) or medium -resolution (196 lines/inch) pages, each of which is a single -strip of data. The generated file conforms to the -TIFF Class F ( FAX ) -specification for storing facsimile data. This means, in -particular, that each page of the data does not -include the trailing return to control ( -RTC ) code; as required for transmission by -the CCITT Group 3 specifications. The old, -‘‘classic’’, format is created if -the −c option is used. (The Class F format can -also be requested with the −f option.)

    - -

    The default name of the output image is fax.tif; -this can be changed with the −o option. Each -input file is assumed to be a separate page of facsimile -data from the same document. The order in which input files -are specified on the command line is the order in which the -resultant pages appear in the output file.

    -
    - -

    OPTIONS

    - - - - - -
    -

    Options that affect the interpretation of input data -are:

    -
    - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
    - -

    −3

    -    		 - -

    Assume input data is CCITT Group 3 -encoded (default).

    -    		 -
    - -

    −4

    -    		 - -

    Assume input data is CCITT Group 4 -encoded.

    -    		 -
    - -

    −U

    -    		 - -

    Assume input data is uncompressed (Group 3 or Group -4).

    -    		 -
    - -

    −1

    -    		 - -

    Assume input data is encoded with the 1-dimensional -version of the CCITT Group 3 Huffman encoding -algorithm (default).

    -    		 -
    - -

    −2

    -    		 - -

    Assume input data is 2-dimensional version of the -CCITT Group 3 Huffman encoding algorithm.

    -    		 -
    - -

    −P

    -    		 - -

    Assume input data is not EOL-aligned (default). -This option has effect with Group 3 encoded input only.

    -    		 -
    - -

    −A

    -    		 - -

    Assume input data is EOL-aligned. This option has effect -with Group 3 encoded input only.

    -    		 -
    - -

    −M

    -    		 - -

    Treat input data as having bits filled from most -significant bit ( MSB ) to most least bit ( -LSB ).

    -    		 -
    - -

    −L

    -    		 - -

    Treat input data as having bits filled from least -significant bit ( LSB ) to most significant -bit ( MSB ) (default).

    -    		 -
    - -

    −B

    -    		 - -

    Assume input data was encoded with black as 0 and white -as 1.

    -    		 -
    - -

    −W

    -    		 - -

    Assume input data was encoded with black as 1 and white -as 0 (default).

    -    		 -
    - -

    −R

    -    		 - -

    Specify the vertical resolution, in lines/inch, of the -input images. By default input are assumed to have a -vertical resolution of 196 lines/inch. If images are low -resolution facsimile, a value of 98 lines/inch should be -specified.

    -    		 -
    - -

    −X

    -    		 - -

    Specify the width, in pixels, of the input images. By -default input are assumed to have a width of 1728 -pixels.

    -    		 -
    - - - - - -
    -

    Options that affect the output file format are:

    -
    - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
    - -

    −o

    -    		 - -

    Specify the name of the output file.

    -    		 -
    - -

    −7

    -    		 - -

    Force output to be compressed with the -CCITT Group 3 Huffman encoding algorithm -(default).

    -    		 -
    - -

    −8

    -    		 - -

    Force output to be compressed with the -CCITT Group 4 Huffman encoding.

    -    		 -
    - -

    −u

    -    		 - -

    Force output to be uncompressed (Group 3 or Group -4).

    -    		 -
    - -

    −5

    -    		 - -

    Force output to be encoded with the 1-dimensional -version of the CCITT Group 3 Huffman encoding -algorithm.

    -    		 -
    - -

    −6

    -    		 - -

    Force output to be encoded with the 2-dimensional -version of the CCITT Group 3 Huffman encoding -algorithm (default).

    -    		 -
    - -

    −a

    -    		 - -

    Force the last bit of each End Of Line ( -EOL ) code to land on a byte boundary -(default). This ‘‘zero padding’’ -will be reflected in the contents of the -Group3Options tag of the resultant -TIFF file. This option has effect with Group -3 encoded output only.

    -    		 -
    - -

    −p

    -    		 - -

    Do not EOL-align output. This option has effect with -Group 3 encoded output only.

    -    		 -
    - -

    −c

    -    		 - -

    Generate "classic" Group 3 TIFF format.

    -    		 -
    - -

    −f

    -    		 - -

    Generate TIFF Class F (TIFF/F) format (default).

    -    		 -
    - -

    −m

    -    		 - -

    Force output data to have bits filled from most -significant bit ( MSB ) to most least bit ( -LSB ).

    -    		 -
    - -

    −l

    -    		 - -

    Force output data to have bits filled from least -significant bit ( LSB ) to most significant -bit ( MSB ) (default).

    -    		 -
    - -

    −r

    -    		 - -

    Specify the number of rows (scanlines) in each strip of -data written to the output file. By default (or when value -0 is specified), tiffcp attempts to set the -rows/strip that no more than 8 kilobytes of data appear in a -strip (with except of G3/G4 compression schemes). If you -specify special value −1 it will results in -infinite number of the rows per strip. The entire image will -be the one strip in that case. This is default in case of -G3/G4 output compression schemes.

    -    		 -
    - -

    −s

    -    		 - -

    Stretch the input image vertically by writing each input -row of data twice to the output file.

    -    		 -
    - -

    −v

    -    		 - -

    Force fax2tiff to print the number of rows of -data it retrieved from the input file.

    -    		 -
    - -

    −z

    -    		 - -

    Force output to be compressed with the LZW encoding.

    -    		 -
    - -

    DIAGNOSTICS

    - - - - - -
    -

    The following warnings and errors come from the decoding -routines in the library.

    - -

    Warning, %s: Premature EOL at scanline %d (x -%d).\n. The input data had a row that was shorter than -the expected width. The row is padded with white.

    - -

    %s: Premature EOF at scanline %d (x %d).\n. The -decoder ran out of data in the middle of a scanline. The -resultant row is padded with white.

    - -

    %s: Bad code word at row %d, x %d\n. An invalid -Group 3 code was encountered while decoding the input -file. The row number and horizontal position is given. The -remainder of the input row is discarded, while the -corresponding output row is padded with white.

    - -

    %s: Bad 2D code word at scanline %d.\n. An invalid -Group 4 or 2D Group 3 code was encountered while -decoding the input file. The row number and horizontal -position is given. The remainder of the input row is -discarded, while the corresponding output row is padded with -white.

    -
    - -

    BUGS

    - - - - - -
    -

    Input data are assumed to have a a ‘‘top -left’’ orientation; it should be possible to -override this assumption from the command line.

    -
    - -

    SEE ALSO

    - - - - - -
    -

    CCITT Recommendation T.4 -(Standardization of Group 3 Facsimile Apparatus for Document -Transmission).

    - -

    The Spirit of TIFF Class F, an appendix to the -TIFF 5.0 specification prepared by Cygnet Technologies.

    - -

    tiffinfo(1), tiffdither(1), -tiffgt(1), libtiff(3)

    - -

    Libtiff library home page: -http://www.remotesensing.org/libtiff/

    -
    -
    - - diff --git a/tiff/html/man/gif2tiff.1.html b/tiff/html/man/gif2tiff.1.html deleted file mode 100644 index 6114bd3..0000000 --- a/tiff/html/man/gif2tiff.1.html +++ /dev/null @@ -1,141 +0,0 @@ - - - - - - -GIF2TIFF - - - -

    GIF2TIFF

    -NAME
    -SYNOPSIS
    -DESCRIPTION
    -OPTIONS
    -NOTES
    -BUGS
    -SEE ALSO
    - -
    - -

    NAME

    - - - - - -
    -

    gif2tiff − create a TIFF file from a -GIF87 format image file

    -
    - -

    SYNOPSIS

    - - - - - -
    -

    gif2tiff [ options ] input.gif -output.tif

    -
    - -

    DESCRIPTION

    - - - - - -
    -

    Gif2tiff converts a file in the GIF87 format to -TIFF. The TIFF image is -created as a palette image, with samples compressed with the -Lempel-Ziv & Welch algorithm (Compression=5). -These characteristics can overridden, or explicitly -specified with the options described below.

    -
    - -

    OPTIONS

    - - - - - - - - - - - - - - -
    - -

    −c

    -    		 - -

    Specify a compression scheme to use when writing image -data: −c none for no compression, −c -packbits for the PackBits compression algorithm, -−c zip for the Deflate compression algorithm, -and −c lzw for Lempel-Ziv & Welch (the -default).

    -    		 -
    - -

    −r

    -    		 - -

    Write data with a specified number of rows per strip; by -default the number of rows/strip is selected so that each -strip is approximately 8 kilobytes.

    -    		 -
    - -

    NOTES

    - - - - - -
    -

    The program is based on Paul Haeberli’s -fromgif program which, in turn, is based on Marcel -J.E. Mol’s GIF reader.

    -
    - -

    BUGS

    - - - - - -
    -

    Should have more options to control output format.

    -
    - -

    SEE ALSO

    - - - - - -
    -

    pal2rgb(1), tiffinfo(1), tiffcp(1), -tiffmedian(1), libtiff(3)

    - -

    Libtiff library home page: -http://www.remotesensing.org/libtiff/

    -
    -
    - - diff --git a/tiff/html/man/index.html b/tiff/html/man/index.html deleted file mode 100644 index 7e9e8d2..0000000 --- a/tiff/html/man/index.html +++ /dev/null @@ -1,64 +0,0 @@ -Libtiff HTML manpage index diff --git a/tiff/html/man/libtiff.3tiff.html b/tiff/html/man/libtiff.3tiff.html deleted file mode 100644 index bea73f7..0000000 --- a/tiff/html/man/libtiff.3tiff.html +++ /dev/null @@ -1,3137 +0,0 @@ - - - - - - -INTRO - - - -

    INTRO

    -NAME
    -SYNOPSIS
    -DESCRIPTION
    -DATA TYPES
    -LIST OF ROUTINES
    -TAG USAGE
    -PSEUDO TAGS
    -DIAGNOSTICS
    -SEE ALSO
    -BUGS
    - -
    - -

    NAME

    - - - - - -
    -

    libtiff − introduction to libtiff, a -library for reading and writing TIFF -files

    -
    - -

    SYNOPSIS

    - - - - - -
    -

    #include <tiffio.h>

    - -

    cc file.c -ltiff

    -
    - -

    DESCRIPTION

    - - - - - -
    -

    libtiff is a library for reading and writing -data files encoded with the Tag Image File format, -Revision 6.0 (or revision 5.0 or revision 4.0). This file -format is suitable for archiving multi-color and -monochromatic image data.

    - -

    The library supports several compression algorithms, -as indicated by the Compression field, including: no -compression (1), CCITT 1D Huffman compression -(2), CCITT Group 3 Facsimile compression -(3), CCITT Group 4 Facsimile compression (4), -Lempel-Ziv & Welch compression (5), baseline JPEG -compression (7), word-aligned 1D Huffman compression -(32771), and PackBits compression (32773). In addition, -several nonstandard compression algorithms are supported: -the 4-bit compression algorithm used by the -ThunderScan program (32809) (decompression only), -NeXT’s 2-bit compression algorithm (32766) -(decompression only), an experimental LZ-style algorithm -known as Deflate (32946), and an experimental CIE LogLuv -compression scheme designed for images with high dynamic -range (32845 for LogL and 32845 for LogLuv). Directory -information may be in either little- or big-endian byte -order−byte swapping is automatically done by the -library. Data bit ordering may be either Most Significant -Bit ( MSB ) to Least Significant Bit ( LSB -) or LSB to MSB. Finally, the -library does not support files in which the -BitsPerSample, Compression, -MinSampleValue, or MaxSampleValue fields are -defined differently on a per-sample basis (in Rev. 6.0 the -Compression tag is not defined on a per-sample basis, -so this is immaterial).

    -
    - -

    DATA TYPES

    - - - - - -
    -

    The library makes extensive use of C typedefs to -promote portability. Two sets of typedefs are used, one for -communication with clients of the library and one for -internal data structures and parsing of the TIFF -format. The following typedefs are exposed to users -either through function definitions or through parameters -passed through the varargs interfaces.

    - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
    - -

    typedef unsigned short uint16;

    -    		 - -

    16-bit unsigned integer

    -
    - -

    typedef unsigned <thing> -uint32;

    -    		 - -

    32-bit unsigned integer

    -
    - -

    typedef unsigned int ttag_t;

    -    		 - -

    directory tag

    -
    - -

    typedef uint16 tdir_t;

    -    		 - -

    directory index

    -
    - -

    typedef uint16 tsample_t;

    -    		 - -

    sample number

    -
    - -

    typedef uint32 tstrip_t;

    -    		 - -

    strip number

    -
    - -

    typedef uint32 ttile_t;

    -    		 - -

    tile number

    -
    - -

    typedef int32 tsize_t;

    -    		 - -

    i/o size in bytes

    -
    - -

    typedef void* tdata_t;

    -    		 - -

    image data ref

    -
    - -

    typedef void* thandle_t;

    -    		 - -

    client data handle

    -
    - -

    typedef int32 toff_t;

    -    		 - -

    file offset

    -
    - - - - - -
    -

    Note that tstrip_t, ttile_t, and -tsize_t are constrained to be no more than 32-bit -quantities by 32-bit fields they are stored in in the -TIFF image. Likewise tsample_t is limited by the -16-bit field used to store the SamplesPerPixel tag. -tdir_t constrains the maximum number of IFDs -that may appear in an image and may be an arbitrary -size (w/o penalty). ttag_t must be either int, -unsigned int, pointer, or double because the library uses a -varargs interface and ANSI C restricts the type -of the parameter before an ellipsis to be a promoted type. -toff_t is defined as int32 because TIFF file offsets -are (unsigned) 32-bit quantities. A signed value is used -because some interfaces return −1 on error. Finally, -note that user-specified data references are passed as -opaque handles and only cast at the lowest layers where -their type is presumed.

    -
    - -

    LIST OF ROUTINES

    - - - - - -
    -

    The following routines are part of the library. -Consult specific manual pages for details on their -operation; on most systems doing ‘‘man -function-name’’ will work.

    - - -

    Name Description

    - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
    - -

    TIFFCheckpointDirectory

    -    		 - -

    writes the current state of the directory

    -
    - -

    TIFFCheckTile

    -    		 - -

    very x,y,z,sample is within image

    -
    - -

    TIFFCIELabToRGBInit

    -    		 - -

    initialize CIE L*a*b* 1976 to RGB conversion -state

    -
    - -

    TIFFCIELabToXYZ

    -    		 - -

    perform CIE L*a*b* 1976 to CIE XYZ -conversion

    -
    - -

    TIFFClientOpen

    -    		 - -

    open a file for reading or writing

    -
    - -

    TIFFClose

    -    		 - -

    close an open file

    -
    - -

    TIFFComputeStrip

    -    		 - -

    return strip containing y,sample

    -
    - -

    TIFFComputeTile

    -    		 - -

    return tile containing x,y,z,sample

    -
    - -

    TIFFCurrentDirectory

    -    		 - -

    return index of current directory

    -
    - -

    TIFFCurrentRow

    -    		 - -

    return index of current scanline

    -
    - -

    TIFFCurrentStrip

    -    		 - -

    return index of current strip

    -
    - -

    TIFFCurrentTile

    -    		 - -

    return index of current tile

    -
    - -

    TIFFDataWidth

    -    		 - -

    return the size of TIFF data types

    -
    - -

    TIFFError

    -    		 - -

    library error handler

    -
    - -

    TIFFFdOpen

    -    		 - -

    open a file for reading or writing

    -
    - -

    TIFFFileName

    -    		 - -

    return name of open file

    -
    - -

    TIFFFileno

    -    		 - -

    return open file descriptor

    -
    - -

    TIFFFindCODEC

    -    		 - -

    find standard codec for the specific -scheme

    -
    - -

    TIFFFlush

    -    		 - -

    flush all pending writes

    -
    - -

    TIFFFlushData

    -    		 - -

    flush pending data writes

    -
    - -

    TIFFGetBitRevTable

    -    		 - -

    return bit reversal table

    -
    - -

    TIFFGetField

    -    		 - -

    return tag value in current directory

    -
    - -

    TIFFGetFieldDefaulted

    -    		 - -

    return tag value in current directory

    -
    - -

    TIFFGetMode

    -    		 - -

    return open file mode

    -
    - -

    TIFFGetVersion

    -    		 - -

    return library version string

    -
    - -

    TIFFIsCODECConfigured

    -    		 - -

    check, whether we have working codec

    -
    - -

    TIFFIsMSB2LSB

    -    		 - -

    return true if image data is being -returned

    -
    - -

    with bit 0 as the most significant bit

    -
    - -

    TIFFIsTiled

    -    		 - -

    return true if image data is tiled

    -
    - -

    TIFFIsByteSwapped

    -    		 - -

    return true if image data is byte-swapped

    -
    - -

    TIFFNumberOfStrips

    -    		 - -

    return number of strips in an image

    -
    - -

    TIFFNumberOfTiles

    -    		 - -

    return number of tiles in an image

    -
    - -

    TIFFOpen

    -    		 - -

    open a file for reading or writing

    -
    - -

    TIFFPrintDirectory

    -    		 - -

    print description of the current -directory

    -
    - -

    TIFFReadBufferSetup

    -    		 - -

    specify i/o buffer for reading

    -
    - -

    TIFFReadDirectory

    -    		 - -

    read the next directory

    -
    - -

    TIFFReadEncodedStrip

    -    		 - -

    read and decode a strip of data

    -
    - -

    TIFFReadEncodedTile

    -    		 - -

    read and decode a tile of data

    -
    - -

    TIFFReadRawStrip

    -    		 - -

    read a raw strip of data

    -
    - -

    TIFFReadRawTile

    -    		 - -

    read a raw tile of data

    -
    - -

    TIFFReadRGBAImage

    -    		 - -

    read an image into a fixed format raster

    -
    - -

    TIFFReadScanline

    -    		 - -

    read and decode a row of data

    -
    - -

    TIFFReadTile

    -    		 - -

    read and decode a tile of data

    -
    - -

    TIFFRegisterCODEC

    -    		 - -

    override standard codec for the specific -scheme

    -
    - -

    TIFFReverseBits

    -    		 - -

    reverse bits in an array of bytes

    -
    - -

    TIFFRGBAImageBegin

    -    		 - -

    setup decoder state for TIFFRGBAImageGet

    -
    - -

    TIFFRGBAImageEnd

    -    		 - -

    release TIFFRGBAImage decoder state

    -
    - -

    TIFFRGBAImageGet

    -    		 - -

    read and decode an image

    -
    - -

    TIFFRGBAImageOK

    -    		 - -

    is image readable by TIFFRGBAImageGet

    -
    - -

    TIFFScanlineSize

    -    		 - -

    return size of a scanline

    -
    - -

    TIFFSetDirectory

    -    		 - -

    set the current directory

    -
    - -

    TIFFSetSubDirectory

    -    		 - -

    set the current directory

    -
    - -

    TIFFSetErrorHandler

    -    		 - -

    set error handler function

    -
    - -

    TIFFSetField

    -    		 - -

    set a tag’s value in the current -directory

    -
    - -

    TIFFSetWarningHandler

    -    		 - -

    set warning handler function

    -
    - -

    TIFFStripSize

    -    		 - -

    returns size of a strip

    -
    - -

    TIFFRawStripSize

    -    		 - -

    returns the number of bytes in a raw -strip

    -
    - -

    TIFFSwabShort

    -    		 - -

    swap bytes of short

    -
    - -

    TIFFSwabLong

    -    		 - -

    swap bytes of long

    -
    - -

    TIFFSwabArrayOfShort

    -    		 - -

    swap bytes of an array of shorts

    -
    - -

    TIFFSwabArrayOfLong

    -    		 - -

    swap bytes of an array of longs

    -
    - -

    TIFFTileRowSize

    -    		 - -

    return size of a row in a tile

    -
    - -

    TIFFTileSize

    -    		 - -

    return size of a tile

    -
    - -

    TIFFUnRegisterCODEC

    -    		 - -

    unregisters the codec

    -
    - -

    TIFFVGetField

    -    		 - -

    return tag value in current directory

    -
    - -

    TIFFVGetFieldDefaulted

    -    		 - -

    return tag value in current directory

    -
    - -

    TIFFVSetField

    -    		 - -

    set a tag’s value in the current -directory

    -
    - -

    TIFFVStripSize

    -    		 - -

    returns the number of bytes in a strip

    -
    - -

    TIFFWarning

    -    		 - -

    library warning handler

    -
    - -

    TIFFWriteDirectory

    -    		 - -

    write the current directory

    -
    - -

    TIFFWriteEncodedStrip

    -    		 - -

    compress and write a strip of data

    -
    - -

    TIFFWriteEncodedTile

    -    		 - -

    compress and write a tile of data

    -
    - -

    TIFFWriteRawStrip

    -    		 - -

    write a raw strip of data

    -
    - -

    TIFFWriteRawTile

    -    		 - -

    write a raw tile of data

    -
    - -

    TIFFWriteScanline

    -    		 - -

    write a scanline of data

    -
    - -

    TIFFWriteTile

    -    		 - -

    compress and write a tile of data

    -
    - -

    TIFFXYZToRGB

    -    		 - -

    perform CIE XYZ to RGB conversion

    -
    - -

    TIFFYCbCrToRGBInit

    -    		 - -

    initialize YCbCr to RGB conversion state

    -
    - -

    TIFFYCbCrtoRGB

    -    		 - -

    perform YCbCr to RGB conversion

    -
    - - - - - -
    -

    Auxiliary functions:

    - - - - - - - - - - - - - - - - - - - - - - - - - - -
    - -

    _TIFFfree

    -    		 - -

    free memory buffer

    -
    - -

    _TIFFmalloc

    -    		 - -

    dynamically allocate memory buffer

    -
    - -

    _TIFFmemcmp

    -    		 - -

    compare contents of the memory buffers

    -
    - -

    _TIFFmemcpy

    -    		 - -

    copy contents of the one buffer to -another

    -
    - -

    _TIFFmemset

    -    		 - -

    fill memory buffer with a constant byte

    -
    - -

    _TIFFrealloc

    -    		 - -

    dynamically reallocate memory buffer

    -
    - -

    TAG USAGE

    - - - - - -
    -

    The table below lists the TIFF tags that -are recognized and handled by the library. If no use is -indicated in the table, then the library reads and writes -the tag, but does not use it internally. Note that some tags -are meaningful only when a particular compression scheme is -being used; e.g. Group3Options is only useful if -Compression is set to CCITT Group 3 -encoding. Tags of this sort are considered -codec-specific tags and the library does not -recognize them except when the Compression tag has -been previously set to the relevant compression -scheme.

    - -
    Tag Name                Value  R/W  Library Use/Notes
-
    -
    - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
    - -

    Artist

    -    		 - -

    315

    -    		 - -

    R/W

    -
    - -

    BadFaxLines

    -    		 - -

    326

    -    		 - -

    R/W

    -
    - -

    BitsPerSample

    -    		 - -

    258

    -    		 - -

    R/W

    -
    - -

    lots

    -
    - -

    CellLength

    -    		 - -

    265

    -    		 -
    - -

    parsed but ignored

    -
    - -

    CellWidth

    -    		 - -

    264

    -    		 -
    - -

    parsed but ignored

    -
    - -

    CleanFaxData

    -    		 - -

    327

    -    		 - -

    R/W

    -
    - -

    ColorMap

    -    		 - -

    320

    -    		 - -

    R/W

    -
    - -

    ColorResponseUnit

    -    		 - -

    300

    -    		 -
    - -

    parsed but ignored

    -
    - -

    Compression

    -    		 - -

    259

    -    		 - -

    R/W

    -
    - -

    choosing codec

    -
    - -

    ConsecutiveBadFaxLines

    -    		 - -

    328

    -    		 - -

    R/W

    -
    - - - - - -
    -

    Copyright 33432 R/W

    - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
    - -

    DataType

    -    		 - -

    32996

    -    		 - -

    R

    -
    - -

    obsoleted by SampleFormat tag

    -
    - -

    DateTime

    -    		 - -

    306

    -    		 - -

    R/W

    -
    - -

    DocumentName

    -    		 - -

    269

    -    		 - -

    R/W

    -
    - -

    DotRange

    -    		 - -

    336

    -    		 - -

    R/W

    -
    - -

    ExtraSamples

    -    		 - -

    338

    -    		 - -

    R/W

    -
    - -

    lots

    -
    - -

    FaxRecvParams

    -    		 - -

    34908

    -    		 - -

    R/W

    -
    - -

    FaxSubAddress

    -    		 - -

    34909

    -    		 - -

    R/W

    -
    - -

    FaxRecvTime

    -    		 - -

    34910

    -    		 - -

    R/W

    -
    - -

    FillOrder

    -    		 - -

    266

    -    		 - -

    R/W

    -
    - -

    control bit order

    -
    - -

    FreeByteCounts

    -    		 - -

    289

    -    		 -
    - -

    parsed but ignored

    -
    - -

    FreeOffsets

    -    		 - -

    288

    -    		 -
    - -

    parsed but ignored

    -
    - -

    GrayResponseCurve

    -    		 - -

    291

    -    		 -
    - -

    parsed but ignored

    -
    - -

    GrayResponseUnit

    -    		 - -

    290

    -    		 -
    - -

    parsed but ignored

    -
    - -

    Group3Options

    -    		 - -

    292

    -    		 - -

    R/W

    -
    - -

    used by Group 3 codec

    -
    - -

    Group4Options

    -    		 - -

    293

    -    		 - -

    R/W

    -
    - -

    HostComputer

    -    		 - -

    316

    -    		 - -

    R/W

    -
    - -

    ImageDepth

    -    		 - -

    32997

    -    		 - -

    R/W

    -
    - -

    tile/strip calculations

    -
    - -

    ImageDescription

    -    		 - -

    270

    -    		 - -

    R/W

    -
    - -

    ImageLength

    -    		 - -

    257

    -    		 - -

    R/W

    -
    - -

    lots

    -
    - -

    ImageWidth

    -    		 - -

    256

    -    		 - -

    R/W

    -
    - -

    lots

    -
    - -

    InkNames

    -    		 - -

    333

    -    		 - -

    R/W

    -
    - -

    InkSet

    -    		 - -

    332

    -    		 - -

    R/W

    -
    - -

    JPEGTables

    -    		 - -

    347

    -    		 - -

    R/W

    -
    - -

    used by JPEG codec

    -
    - -

    Make

    -    		 - -

    271

    -    		 - -

    R/W

    -
    - -

    Matteing

    -    		 - -

    32995

    -    		 - -

    R

    -
    - -

    obsoleted by ExtraSamples tag

    -
    - -

    MaxSampleValue

    -    		 - -

    281

    -    		 - -

    R/W

    -
    - -

    MinSampleValue

    -    		 - -

    280

    -    		 - -

    R/W

    -
    - -

    Model

    -    		 - -

    272

    -    		 - -

    R/W

    -
    - -

    NewSubFileType

    -    		 - -

    254

    -    		 - -

    R/W

    -
    - -

    called SubFileType in spec

    -
    - -

    NumberOfInks

    -    		 - -

    334

    -    		 - -

    R/W

    -
    - -

    Orientation

    -    		 - -

    274

    -    		 - -

    R/W

    -
    - -

    PageName

    -    		 - -

    285

    -    		 - -

    R/W

    -
    - -

    PageNumber

    -    		 - -

    297

    -    		 - -

    R/W

    -
    - -

    PhotometricInterpretation

    -    		 - -

    262

    -
    - -

    R/Wused by Group 3 and JPEG codecs

    -
    - -

    PlanarConfiguration

    -    		 - -

    284

    -    		 - -

    R/W

    -
    - -

    data i/o

    -
    - -

    Predictor

    -    		 - -

    317

    -    		 - -

    R/W

    -
    - -

    used by LZW and Deflate codecs

    -
    - -

    PrimaryChromacities

    -    		 - -

    319

    -    		 - -

    R/W

    -
    - -

    ReferenceBlackWhite

    -    		 - -

    532

    -    		 - -

    R/W

    -
    - -

    ResolutionUnit

    -    		 - -

    296

    -    		 - -

    R/W

    -
    - -

    used by Group 3 codec

    -
    - -

    RowsPerStrip

    -    		 - -

    278

    -    		 - -

    R/W

    -
    - -

    data i/o

    -
    - -

    SampleFormat

    -    		 - -

    339

    -    		 - -

    R/W

    -
    - -

    SamplesPerPixel

    -    		 - -

    277

    -    		 - -

    R/W

    -
    - -

    lots

    -
    - -

    SMinSampleValue

    -    		 - -

    340

    -    		 - -

    R/W

    -
    - -

    SMaxSampleValue

    -    		 - -

    341

    -    		 - -

    R/W

    -
    - -

    Software

    -    		 - -

    305

    -    		 - -

    R/W

    -
    - -

    StoNits

    -    		 - -

    37439

    -    		 - -

    R/W

    -
    - -

    StripByteCounts

    -    		 - -

    279

    -    		 - -

    R/W

    -
    - -

    data i/o

    -
    - -

    StripOffsets

    -    		 - -

    273

    -    		 - -

    R/W

    -
    - -

    data i/o

    -
    - -

    SubFileType

    -    		 - -

    255

    -    		 - -

    R/W

    -
    - -

    called OSubFileType in spec

    -
    - -

    TargetPrinter

    -    		 - -

    337

    -    		 - -

    R/W

    -
    - -

    Thresholding

    -    		 - -

    263

    -    		 - -

    R/W

    -
    -
    - -

    TileByteCounts

    -    		 - -

    324

    -    		 - -

    R/W

    -
    - -

    data i/o

    -
    - -

    TileDepth

    -    		 - -

    32998

    -    		 - -

    R/W

    -
    - -

    tile/strip calculations

    -
    - -

    TileLength

    -    		 - -

    323

    -    		 - -

    R/W

    -
    - -

    data i/o

    -
    - -

    TileOffsets

    -    		 - -

    324

    -    		 - -

    R/W

    -
    - -

    data i/o

    -
    - -

    TileWidth

    -    		 - -

    322

    -    		 - -

    R/W

    -
    - -

    data i/o

    -
    - -

    TransferFunction

    -    		 - -

    301

    -    		 - -

    R/W

    -
    - -

    WhitePoint

    -    		 - -

    318

    -    		 - -

    R/W

    -
    - -

    XPosition

    -    		 - -

    286

    -    		 - -

    R/W

    -
    - -

    XResolution

    -    		 - -

    282

    -    		 - -

    R/W

    -
    - -

    YCbCrCoefficients

    -    		 - -

    529

    -    		 - -

    R/W

    -
    - -

    used by TIFFRGBAImage support

    -
    - -

    YCbCrPositioning

    -    		 - -

    531

    -    		 - -

    R/W

    -
    - -

    tile/strip size calulcations

    -
    - -

    YCbCrSubsampling

    -    		 - -

    530

    -    		 - -

    R/W

    -
    - -

    YPosition

    -    		 - -

    286

    -    		 - -

    R/W

    -
    - -

    YResolution

    -    		 - -

    283

    -    		 - -

    R/W

    -
    - -

    used by Group 3 codec

    -
    - -

    PSEUDO TAGS

    - - - - - -
    -

    In addition to the normal TIFF tags the -library supports a collection of tags whose values lie in a -range outside the valid range of TIFF tags. These -tags are termed pseud-tags and are used to control -various codec-specific functions within the library. The -table below summarizes the defined pseudo-tags.

    - -
    Tag Name                Codec  R/W  Library Use/Notes
-
    -
    - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
    - -

    TIFFTAG_FAXMODE

    -    		 - -

    G3

    -    		 - -

    R/W

    -
    - -

    general codec operation

    -
    - -

    TIFFTAG_FAXFILLFUNC

    -    		 - -

    G3/G4

    -    		 - -

    R/W

    -
    - -

    bitmap fill function

    -
    - -

    TIFFTAG_JPEGQUALITY

    -    		 - -

    JPEG

    -    		 - -

    R/W

    -
    - -

    compression quality control

    -
    - -

    TIFFTAG_JPEGCOLORMODE

    -    		 - -

    JPEG

    -    		 - -

    R/W

    -
    - -

    control colorspace conversions

    -
    - -

    TIFFTAG_JPEGTABLESMODE

    -    		 - -

    JPEG

    -    		 - -

    R/W

    -
    - -

    control contents of JPEGTables tag

    -
    - -

    TIFFTAG_ZIPQUALITY

    -    		 - -

    Deflate

    -    		 - -

    R/Wcompression quality level

    -
    - -

    TIFFTAG_PIXARLOGDATAFMT

    -    		 - -

    PixarLog

    -    		 - -

    R/Wuser data format

    -
    - -

    TIFFTAG_PIXARLOGQUALITY

    -    		 - -

    PixarLog

    -    		 - -

    R/Wcompression quality level

    -
    - -

    TIFFTAG_SGILOGDATAFMT

    -    		 - -

    SGILog

    -    		 - -

    R/W

    -
    - -

    user data format

    -
    - - - - - -
    -

    TIFFTAG_FAXMODE

    - - - - - -
    -

    Control the operation of the Group 3 codec. Possible -values (independent bits that can be combined by -or’ing them together) are: FAXMODE_CLASSIC (enable -old-style format in which the RTC is written at -the end of the last strip), FAXMODE_NORTC (opposite of -FAXMODE_CLASSIC; also called FAXMODE_CLASSF), FAXMODE_NOEOL -(do not write EOL codes at the start of each row -of data), FAXMODE_BYTEALIGN (align each encoded row to an -8-bit boundary), FAXMODE_WORDALIGN (align each encoded row -to an 16-bit boundary), The default value is dependent on -the compression scheme; this pseudo-tag is used by the -various G3 and G4 codecs to share code.

    -
    - - - - - -
    -

    TIFFTAG_FAXFILLFUNC

    - - - - - -
    -

    Control the function used to convert arrays of black -and white runs to packed bit arrays. This hook can be used -to image decoded scanlines in multi-bit depth rasters (e.g. -for display in colormap mode) or for other purposes. The -default value is a pointer to a builtin function that images -packed bilevel data.

    -
    - - - - - -
    -

    TIFFTAG_IPTCNEWSPHOTO

    - - - - - -
    -

    Tag contaings image metadata per the IPTC newsphoto -spec: Headline, captioning, credit, etc... Used by most wire -services.

    -
    - - - - - -
    -

    TIFFTAG_PHOTOSHOP

    - - - - - -
    -

    Tag contains Photoshop captioning information and -metadata. Photoshop uses in parallel and redundantly -alongside IPTCNEWSPHOTO information.

    -
    - - - - - -
    -

    TIFFTAG_JPEGQUALITY

    - - - - - -
    -

    Control the compression quality level used in the -baseline algorithm. Note that quality levels are in the -range 0-100 with a default value of 75.

    -
    - - - - - -
    -

    TIFFTAG_JPEGCOLORMODE

    - - - - - -
    -

    Control whether or not conversion is done between -RGB and YCbCr colorspaces. Possible values are: -JPEGCOLORMODE_RAW (do not convert), and JPEGCOLORMODE_RGB -(convert to/from RGB) The default value is -JPEGCOLORMODE_RAW.

    -
    - - - - - -
    -

    TIFFTAG_JPEGTABLESMODE

    - - - - - -
    -

    Control the information written in the -JPEGTables tag. Possible values (independent bits -that can be combined by or’ing them together) are: -JPEGTABLESMODE_QUANT (include quantization tables), and -JPEGTABLESMODE_HUFF (include Huffman encoding tables). The -default value is -JPEGTABLESMODE_QUANT|JPEGTABLESMODE_HUFF.

    -
    - - - - - -
    -

    TIFFTAG_ZIPQUALITY

    - - - - - -
    -

    Control the compression technique used by the -Deflate codec. Quality levels are in the range 1-9 with -larger numbers yielding better compression at the cost of -more computation. The default quality level is 6 which -yields a good time-space tradeoff.

    -
    - - - - - -
    -

    TIFFTAG_PIXARLOGDATAFMT

    - - - - - -
    -

    Control the format of user data passed in to -the PixarLog codec when encoding and passed out from -when decoding. Possible values are: PIXARLOGDATAFMT_8BIT for -8-bit unsigned pixels, PIXARLOGDATAFMT_8BITABGR for 8-bit -unsigned ABGR-ordered pixels, PIXARLOGDATAFMT_11BITLOG for -11-bit log-encoded raw data, PIXARLOGDATAFMT_12BITPICIO for -12-bit PICIO-compatible data, PIXARLOGDATAFMT_16BIT for -16-bit signed samples, and PIXARLOGDATAFMT_FLOAT for 32-bit -IEEE floating point samples.

    -
    - - - - - -
    -

    TIFFTAG_PIXARLOGQUALITY

    - - - - - -
    -

    Control the compression technique used by the -PixarLog codec. This value is treated identically to -TIFFTAG_ZIPQUALITY; see the above description.

    -
    - - - - - -
    -

    TIFFTAG_SGILOGDATAFMT

    - - - - - -
    -

    Control the format of client data passed in -to the SGILog codec when encoding and passed out from -when decoding. Possible values are: SGILOGDATAFMT_FLTXYZ for -converting between LogLuv and 32-bit IEEE floating valued -XYZ pixels, SGILOGDATAFMT_16BITLUV for 16-bit encoded Luv -pixels, SGILOGDATAFMT_32BITRAW and SGILOGDATAFMT_24BITRAW -for no conversion of data, SGILOGDATAFMT_8BITRGB for -returning 8-bit RGB data (valid only when decoding -LogLuv-encoded data), SGILOGDATAFMT_FLTY for converting -between LogL and 32-bit IEEE floating valued Y pixels, -SGILOGDATAFMT_16BITL for 16-bit encoded L pixels, and -SGILOGDATAFMT_8BITGRY for returning 8-bit greyscale data -(valid only when decoding LogL-encoded data).

    -
    - -

    DIAGNOSTICS

    - - - - - -
    -

    All error messages are directed through the -TIFFError routine. By default messages are directed -to stderr in the form: module: message\n. -Warning messages are likewise directed through the -TIFFWarning routine.

    -
    - -

    SEE ALSO

    - - - - - -
    -

    fax2tiff(1), gif2tiff(1), -pal2rgb(1), ppm2tiff(1), rgb2ycbcr(1), -ras2tiff(1), raw2tiff(1), sgi2tiff(1), -tiff2bw(1), tiffdither(1), tiffdump(1), -tiffcp(1), tiffcmp(1), tiffgt(1), -tiffinfo(1), tiffmedian(1), -tiffsplit(1), tiffsv(1).

    - -

    Tag Image File Format Specification — -Revision 6.0, an Aldus Technical Memorandum.

    - -

    The Spirit of TIFF Class F, an appendix to -the TIFF 5.0 specification prepared by Cygnet -Technologies.

    - -

    Libtiff library home page: -http://www.remotesensing.org/libtiff/

    -
    - -

    BUGS

    - - - - - -
    -

    The library does not support multi-sample images -where some samples have different bits/sample.

    - -

    The library does not support random access to -compressed data that is organized with more than one row per -tile or strip.

    -
    -
    - - diff --git a/tiff/html/man/pal2rgb.1.html b/tiff/html/man/pal2rgb.1.html deleted file mode 100644 index 5c3a679..0000000 --- a/tiff/html/man/pal2rgb.1.html +++ /dev/null @@ -1,189 +0,0 @@ - - - - - - -PAL2RGB - - - -

    PAL2RGB

    -NAME
    -SYNOPSIS
    -DESCRIPTION
    -OPTIONS
    -BUGS
    -SEE ALSO
    - -
    - -

    NAME

    - - - - - -
    -

    pal2rgb − convert a palette color -TIFF image to a full color image

    -
    - -

    SYNOPSIS

    - - - - - -
    -

    pal2rgb [ options ] input.tif -output.tif

    -
    - -

    DESCRIPTION

    - - - - - -
    -

    Pal2rgb converts a palette color -TIFF image to a full color image by applying -the colormap of the palette image to each sample to generate -a full color RGB image.

    -
    - -

    OPTIONS

    - - - - - -
    -

    Options that affect the interpretation of input data -are:

    -
    - - - - - - - - -
    - -

    −C

    -    		 - -

    This option overrides the default behavior of -pal2rgb in determining whether or not colormap -entries contain 16-bit or 8-bit values. By default the -colormap is inspected and if no colormap entry greater than -255 is found, the colormap is assumed to have only 8-bit -values; otherwise 16-bit values (as required by the -TIFF specification) are assumed. The -−C option can be used to explicitly specify the -number of bits for colormap entries: −C 8 for -8-bit values, −C 16 for 16-bit values.

    -    		 -
    - - - - - -
    -

    Options that affect the output file format are:

    -
    - - - - - - - - - - - - - - - - - - - - -
    - -

    −p

    -    		 - -

    Explicitly select the planar configuration used in -organizing data samples in the output image: −p -contig for samples packed contiguously, and −p -separate for samples stored separately. By default -samples are packed.

    -    		 -
    - -

    −c

    -    		 - -

    Use the specific compression algorithm to encoded image -data in the output file: −c packbits for -Macintosh Packbits, −c lzw for Lempel-Ziv & -Welch, −c zip for Deflate, −c none -for no compression. If no compression-related option is -specified, the input file’s compression algorithm is -used.

    -    		 -
    - -

    −r

    -    		 - -

    Explicitly specify the number of rows in each strip of -the output file. If the −r option is not -specified, a number is selected such that each output strip -has approximately 8 kilobytes of data in it.

    -    		 -
    - -

    BUGS

    - - - - - -
    -

    Only 8-bit images are handled.

    -
    - -

    SEE ALSO

    - - - - - -
    -

    tiffinfo(1), tiffcp(1), -tiffmedian(1), libtiff(3)

    - -

    Libtiff library home page: -http://www.remotesensing.org/libtiff/

    -
    -
    - - diff --git a/tiff/html/man/ppm2tiff.1.html b/tiff/html/man/ppm2tiff.1.html deleted file mode 100644 index 60e56e1..0000000 --- a/tiff/html/man/ppm2tiff.1.html +++ /dev/null @@ -1,141 +0,0 @@ - - - - - - -PPM2TIFF - - - -

    PPM2TIFF

    -NAME
    -SYNOPSIS
    -DESCRIPTION
    -OPTIONS
    -SEE ALSO
    - -
    - -

    NAME

    - - - - - -
    -

    ppm2tiff − create a TIFF file from -PPM, PGM and PBM image -files

    -
    - -

    SYNOPSIS

    - - - - - -
    -

    ppm2tiff [ options ] [ input.ppm ] -output.tif

    -
    - -

    DESCRIPTION

    - - - - - -
    -

    ppm2tiff converts a file in the PPM, -PGM and PBM image formats to -TIFF. By default, the TIFF -image is created with data samples packed -(PlanarConfiguration=1), compressed with the Packbits -algorithm (Compression=32773), and with each strip no -more than 8 kilobytes. These characteristics can be -overridden, or explicitly specified with the options -described below

    - -

    If the PPM file contains greyscale data, -then the PhotometricInterpretation tag is set to 1 -(min-is-black), otherwise it is set to 2 (RGB).

    - -

    If no PPM file is specified on the command -line, ppm2tiff will read from the standard input.

    -
    - -

    OPTIONS

    - - - - - - - - - - - - - - - - - - - - -
    - -

    −c

    -    		 - -

    Specify a compression scheme to use when writing image -data: none for no compression, packbits for -PackBits compression (will be used by default), lzw -for Lempel-Ziv & Welch compression, jpeg for -baseline JPEG compression, zip for Deflate -compression, g3 for CCITT Group 3 (T.4) compression, -and g4 for CCITT Group 4 (T.6) compression.

    -    		 -
    - -

    −r

    -    		 - -

    Write data with a specified number of rows per strip; by -default the number of rows/strip is selected so that each -strip is approximately 8 kilobytes.

    -    		 -
    - -

    −R

    -    		 - -

    Mark the resultant image to have the specified X and Y -resolution (in dots/inch).

    -    		 -
    - -

    SEE ALSO

    - - - - - -
    -

    tiffinfo(1), tiffcp(1), -tiffmedian(1), libtiff(3)

    - -

    Libtiff library home page: -http://www.remotesensing.org/libtiff/

    -
    -
    - - diff --git a/tiff/html/man/ras2tiff.1.html b/tiff/html/man/ras2tiff.1.html deleted file mode 100644 index b0b8993..0000000 --- a/tiff/html/man/ras2tiff.1.html +++ /dev/null @@ -1,139 +0,0 @@ - - - - - - -RAS2TIFF - - - -

    RAS2TIFF

    -NAME
    -SYNOPSIS
    -DESCRIPTION
    -OPTIONS
    -BUGS
    -SEE ALSO
    - -
    - -

    NAME

    - - - - - -
    -

    ras2tiff − create a TIFF file from a -Sun rasterfile

    -
    - -

    SYNOPSIS

    - - - - - -
    -

    ras2tiff [ options ] input.ras -output.tif

    -
    - -

    DESCRIPTION

    - - - - - -
    -

    ras2tiff converts a file in the Sun rasterfile -format to TIFF. By default, the -TIFF image is created with data samples -packed (PlanarConfiguration=1), compressed with the -Lempel-Ziv & Welch algorithm (Compression=5), and -with each strip no more than 8 kilobytes. These -characteristics can overridden, or explicitly specified with -the options described below.

    - -

    Any colormap information in the rasterfile is carried -over to the TIFF file by including a -Colormap tag in the output file. If the rasterfile -has a colormap, the PhotometricInterpretation tag is -set to 3 (palette); otherwise it is set to 2 (RGB) if the -depth is 24 or 1 (min-is-black) if the depth is not 24.

    -
    - -

    OPTIONS

    - - - - - - - - - - - - - - -
    - -

    −c

    -    		 - -

    Specify a compression scheme to use when writing image -data: −c none for no compression, −c -packbits for the PackBits compression algorithm, -−c jpeg for the baseline JPEG compression -algorithm, −c zip for the Deflate compression -algorithm, and −c lzw for Lempel-Ziv & -Welch (the default).

    -    		 -
    - -

    −r

    -    		 - -

    Write data with a specified number of rows per strip; by -default the number of rows/strip is selected so that each -strip is approximately 8 kilobytes.

    -    		 -
    - -

    BUGS

    - - - - - -
    -

    Does not handle all possible rasterfiles. In particular, -ras2tiff does not handle run-length encoded -images.

    -
    - -

    SEE ALSO

    - - - - - -
    -

    pal2rgb(1), tiffinfo(1), tiffcp(1), -tiffmedian(1), libtiff(3)

    - -

    Libtiff library home page: -http://www.remotesensing.org/libtiff/

    -
    -
    - - diff --git a/tiff/html/man/raw2tiff.1.html b/tiff/html/man/raw2tiff.1.html deleted file mode 100644 index 360eb27..0000000 --- a/tiff/html/man/raw2tiff.1.html +++ /dev/null @@ -1,510 +0,0 @@ - - - - - - -RAW2TIFF - - - -

    RAW2TIFF

    -NAME
    -SYNOPSIS
    -DESCRIPTION
    -OPTIONS
    -GUESSING THE IMAGE GEOMETRY
    -SEE ALSO
    - -
    - -

    NAME

    - - - - - -
    -

    raw2tiff − create a TIFF file from a -raw data

    -
    - -

    SYNOPSIS

    - - - - - -
    -

    raw2tiff [ options ] input.raw -output.tif

    -
    - -

    DESCRIPTION

    - - - - - -
    -

    raw2tiff converts a raw byte sequence into -TIFF. By default, the TIFF -image is created with data samples packed -(PlanarConfiguration=1), compressed with the PackBits -algorithm (Compression=32773), and with each strip no -more than 8 kilobytes. These characteristics can overridden, -or explicitly specified with the options described -below.

    -
    - -

    OPTIONS

    - - - - - -
    -

    −H number

    - - - - - -
    -

    size of input image file header in bytes (0 by default). -This amount of data just will be skipped from the start of -file while reading.

    -
    - - - - - -
    -

    −w number

    - - - - - -
    -

    width of input image in pixels (can be guessed, see -GUESSING THE IMAGE GEOMETRY -below).

    -
    - - - - - -
    -

    −l number

    - - - - - -
    -

    length of input image in lines (can be guessed, see -GUESSING THE IMAGE GEOMETRY -below).

    -
    - - - - - -
    -

    −b number

    - - - - - -
    -

    number of bands in input image (1 by default).

    -
    - - - - - -
    -

    −d data_type

    - - - - - -
    -

    type of samples in input image, where data_type -may be:

    - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
    - -

    byte

    -    		 - -

    8-bit unsigned integer (default),

    -
    - -

    short

    -    		 - -

    16-bit unsigned integer,

    -
    - -

    long

    -    		 - -

    32-bit unsigned integer,

    -
    - -

    sbyte

    -    		 - -

    8-bit signed integer,

    -
    - -

    sshort

    -    		 - -

    16-bit signed integer,

    -
    - -

    slong

    -    		 - -

    32-bit signed integer,

    -
    - -

    float

    -    		 - -

    32-bit IEEE floating point,

    -
    - -

    double

    -    		 - -

    64-bit IEEE floating point.

    -
    - - - - - -
    -

    −i config

    - - - - - -
    -

    type of samples interleaving in input image, where -config may be:

    - - - - - - - - - - -
    - -

    pixel

    -    		 - -

    pixel interleaved data (default),

    -
    - -

    band

    -    		 - -

    band interleaved data.

    -
    - - - - - -
    -

    −p photo

    - - - - - -
    -

    photometric interpretation (color space) of the input -image, where photo may be:

    - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
    - -

    miniswhite

    -    		 - -

    white color represented with 0 value,

    -
    - -

    minisblack

    -    		 - -

    black color represented with 0 value (default),

    -
    - -

    rgb

    -    		 - -

    image has RGB color model,

    -
    - -

    cmyk

    -    		 - -

    image has CMYK (separated) color model,

    -
    - -

    ycbcr

    -    		 - -

    image has YCbCr color model,

    -
    - -

    cielab

    -    		 - -

    image has CIE L*a*b color model,

    -
    - -

    icclab

    -    		 - -

    image has ICC L*a*b color model,

    -
    - -

    itulab

    -    		 - -

    image has ITU L*a*b color model.

    -
    - - - - - - - - - - - - - - - - - - - - - - - - - - -
    - -

    −s

    -    		 - -

    swap bytes fetched from the input file.

    -    		 -
    - -

    −L

    -    		 - -

    input data has LSB2MSB bit order (default).

    -    		 -
    - -

    −M

    -    		 - -

    input data has MSB2LSB bit order.

    -    		 -
    - -

    −c

    -    		 - -

    Specify a compression scheme to use when writing image -data: −c none for no compression, −c -packbits for the PackBits compression algorithm (the -default), −c jpeg for the baseline JPEG -compression algorithm, −c zip for the Deflate -compression algorithm, and −c lzw for -Lempel-Ziv & Welch.

    -    		 -
    - - - - - -
    -

    −r number

    - - - - - -
    -

    Write data with a specified number of rows per strip; by -default the number of rows/strip is selected so that each -strip is approximately 8 kilobytes.

    -
    - -

    GUESSING THE IMAGE GEOMETRY

    - - - - - -
    -

    raw2tiff can guess image width and height in case -one or both of these parameters are not specified. If you -omit one of those parameters, the complementary one will be -calculated based on the file size (taking into account -header size, number of bands and data type). If you omit -both parameters, the statistical approach will be used. -Utility will compute correlation coefficient between two -lines at the image center using several appropriate line -sizes and the highest absolute value of the coefficient will -indicate the right line size. That is why you should be -cautious with the very large images, because guessing -process may take a while (depending on your system -performance). Of course, the utility can’t guess the -header size, number of bands and data type, so it should be -specified manually. If you don’t know anything about -your image, just try with the several combinations of those -options.

    - -

    There is no magic, it is just a mathematical statistics, -so it can be wrong in some cases. But for most ordinary -images guessing method will work fine.

    -
    - -

    SEE ALSO

    - - - - - -
    -

    pal2rgb(1), tiffcp(1), -tiffmedian(1), libtiff(3)

    - -

    Libtiff library home page: -http://www.remotesensing.org/libtiff/

    -
    -
    - - diff --git a/tiff/html/man/rgb2ycbcr.1.html b/tiff/html/man/rgb2ycbcr.1.html deleted file mode 100644 index 5cff15f..0000000 --- a/tiff/html/man/rgb2ycbcr.1.html +++ /dev/null @@ -1,155 +0,0 @@ - - - - - - -RGB2YCBCR - - - -

    RGB2YCBCR

    -NAME
    -SYNOPSIS
    -DESCRIPTION
    -OPTIONS
    -SEE ALSO
    - -
    - -

    NAME

    - - - - - -
    -

    rgb2ycbcr − convert non-YCbCr TIFF -images to a YCbCr TIFF image

    -
    - -

    SYNOPSIS

    - - - - - -
    -

    rgb2ycbcr [ options ] src1.tif src2.tif -... dst.tif

    -
    - -

    DESCRIPTION

    - - - - - -
    -

    rgb2ycbcr converts RGB color, -greyscale, or bi-level TIFF images to YCbCr -images by transforming and sampling pixel data. If multiple -files are specified on the command line each source file is -converted to a separate directory in the destination -file.

    - -

    By default, chrominance samples are created by sampling 2 -by 2 blocks of luminance values; this can be changed with -the −h and −v options. Output data -are compressed with the PackBits compression -scheme, by default; an alternate scheme can be selected with -the −c option. By default, output data are -compressed in strips with the number of rows in each strip -selected so that the size of a strip is never more than 8 -kilobytes; the −r option can be used to -explicitly set the number of rows per strip.

    -
    - -

    OPTIONS

    - - - - - - - - - - - - - - - - - - - - - - - - - - -
    - -

    −c

    -    		 - -

    Specify a compression scheme to use when writing image -data: −c none for no compression, −c -packbits for the PackBits compression algorithm (the -default), −c jpeg for the JPEG compression -algorithm, −c zip for the deflate compression -algorithm, and −c lzw for Lempel-Ziv & -Welch.

    -    		 -
    - -

    −h

    -    		 - -

    Set the horizontal sampling dimension to one of: 1, 2 -(default), or 4.

    -    		 -
    - -

    −r

    -    		 - -

    Write data with a specified number of rows per strip; by -default the number of rows/strip is selected so that each -strip is approximately 8 kilobytes.

    -    		 -
    - -

    −v

    -    		 - -

    Set the vertical sampling dimension to one of: 1, 2 -(default), or 4.

    -    		 -
    - -

    SEE ALSO

    - - - - - -
    -

    tiffinfo(1), tiffcp(1), -libtiff(3)

    - -

    Libtiff library home page: -http://www.remotesensing.org/libtiff

    -
    -
    - - diff --git a/tiff/html/man/sgi2tiff.1.html b/tiff/html/man/sgi2tiff.1.html deleted file mode 100644 index fe90d64..0000000 --- a/tiff/html/man/sgi2tiff.1.html +++ /dev/null @@ -1,147 +0,0 @@ - - - - - - -SGI2TIFF - - - -

    SGI2TIFF

    -NAME
    -SYNOPSIS
    -DESCRIPTION
    -OPTIONS
    -BUGS
    -SEE ALSO
    - -
    - -

    NAME

    - - - - - -
    -

    sgi2tiff − create a TIFF file from -an SGI image file

    -
    - -

    SYNOPSIS

    - - - - - -
    -

    sgi2tiff [ options ] input.rgb -output.tif

    -
    - -

    DESCRIPTION

    - - - - - -
    -

    sgi2tiff converts a file in the SGI -image format to TIFF. By default, the -TIFF image is created with data samples -packed (PlanarConfiguration=1), compressed with the -Lempel-Ziv & Welch algorithm (Compression=5), and -with each strip no more than 8 kilobytes. These -characteristics can overridden, or explicitly specified with -the options described below.

    -
    - -

    OPTIONS

    - - - - - - - - - - - - - - - - - - - - -
    - -

    −c

    -    		 - -

    Specify a compression scheme to use when writing image -data: −c none for no compression, −c -packbits for the PackBits compression algorithm), -−c jpeg for the baseline JPEG compression -algorithm, −c zip for the Deflate compression -algorithm, and −c lzw for Lempel-Ziv & -Welch (the default).

    -    		 -
    - -

    −p

    -    		 - -

    Explicitly select the planar configuration used in -organizing data samples in the output image: −p -contig for samples packed contiguously, and −p -separate for samples stored separately. By default -samples are packed.

    -    		 -
    - -

    −r

    -    		 - -

    Write data with a specified number of rows per strip; by -default the number of rows/strip is selected so that each -strip is approximately 8 kilobytes.

    -    		 -
    - -

    BUGS

    - - - - - -
    -

    Does not record colormap information.

    -
    - -

    SEE ALSO

    - - - - - -
    -

    tiffinfo(1), tiffcp(1), -tiffmedian(1), libtiff(3)

    - -

    Libtiff library home page: -http://www.remotesensing.org/libtiff/

    -
    -
    - - diff --git a/tiff/html/man/thumbnail.1.html b/tiff/html/man/thumbnail.1.html deleted file mode 100644 index fabc601..0000000 --- a/tiff/html/man/thumbnail.1.html +++ /dev/null @@ -1,148 +0,0 @@ - - - - - - -THUMBNAIL - - - -

    THUMBNAIL

    -NAME
    -SYNOPSIS
    -DESCRIPTION
    -OPTIONS
    -BUGS
    -SEE ALSO
    - -
    - -

    NAME

    - - - - - -
    -

    thumbnail − create a TIFF file with -thumbnail images

    -
    - -

    SYNOPSIS

    - - - - - -
    -

    thumbnail [ options ] input.tif -output.tif

    -
    - -

    DESCRIPTION

    - - - - - -
    -

    thumbnail is a program written to show how one -might use the SubIFD tag (#330) to store thumbnail images. -thumbnail copies a TIFF Class F -facsimile file to the output file and for each image an -8-bit greyscale thumbnail sketch. The output file -contains the thumbnail image with the associated -full-resolution page linked below with the SubIFD tag.

    - -

    By default, thumbnail images are 216 pixels wide by 274 -pixels high. Pixels are calculated by sampling and filtering -the input image with each pixel value passed through a -contrast curve.

    -
    - -

    OPTIONS

    - - - - - - - - - - - - - - - - - - - - -
    - -

    −w

    -    		 - -

    Specify the width of thumbnail images in pixels.

    -    		 -
    - -

    −h

    -    		 - -

    Specify the height of thumbnail images in pixels.

    -    		 -
    - -

    −c

    -    		 - -

    Specify a contrast curve to apply in generating the -thumbnail images. By default pixels values are passed -through a linear contrast curve that simply maps the pixel -value ranges. Alternative curves are: exp50 for a 50% -exponential curve, exp60 for a 60% exponential curve, -exp70 for a 70% exponential curve, exp80 for a -80% exponential curve, exp90 for a 90% exponential -curve, exp for a pure exponential curve, -linear for a linear curve.

    -    		 -
    - -

    BUGS

    - - - - - -
    -

    There are no options to control the format of the saved -thumbnail images.

    -
    - -

    SEE ALSO

    - - - - - -
    -

    tiffdump(1), tiffgt(1), tiffinfo(1), -libtiff(3)

    - -

    Libtiff library home page: -http://www.remotesensing.org/libtiff/

    -
    -
    - - diff --git a/tiff/html/man/tiff2bw.1.html b/tiff/html/man/tiff2bw.1.html deleted file mode 100644 index 6b6accf..0000000 --- a/tiff/html/man/tiff2bw.1.html +++ /dev/null @@ -1,161 +0,0 @@ - - - - - - -TIFF2BW - - - -

    TIFF2BW

    -NAME
    -SYNOPSIS
    -DESCRIPTION
    -OPTIONS
    -SEE ALSO
    - -
    - -

    NAME

    - - - - - -
    -

    tiff2bw − convert a color TIFF image -to greyscale

    -
    - -

    SYNOPSIS

    - - - - - -
    -

    tiff2bw [ options ] input.tif -output.tif

    -
    - -

    DESCRIPTION

    - - - - - -
    -

    Tiff2bw converts an RGB or Palette -color TIFF image to a greyscale image by -combining percentages of the red, green, and blue channels. -By default, output samples are created by taking 28% of the -red channel, 59% of the green channel, and 11% of the blue -channel. To alter these percentages, the −R, -−G, and −B options may be -used.

    -
    - -

    OPTIONS

    - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
    - -

    −c

    -    		 - -

    Specify a compression scheme to use when writing image -data: −c none for no compression, −c -packbits for the PackBits compression algorithm, -−c zip for the Deflate compression algorithm, -−c g3 for the CCITT Group 3 compression -algorithm, −c g4 for the CCITT Group 4 -compression algorithm, and −c lzw for -Lempel-Ziv & Welch (the default).

    -    		 -
    - -

    −r

    -    		 - -

    Write data with a specified number of rows per strip; by -default the number of rows/strip is selected so that each -strip is approximately 8 kilobytes.

    -    		 -
    - -

    −R

    -    		 - -

    Specify the percentage of the red channel to use -(default 28).

    -    		 -
    - -

    −G

    -    		 - -

    Specify the percentage of the green channel to use -(default 59).

    -    		 -
    - -

    −B

    -    		 - -

    Specify the percentage of the blue channel to use -(default 11).

    -    		 -
    - -

    SEE ALSO

    - - - - - -
    -

    pal2rgb(1), tiffinfo(1), tiffcp(1), -tiffmedian(1), libtiff(3)

    - -

    Libtiff library home page: -http://www.remotesensing.org/libtiff/

    -
    -
    - - diff --git a/tiff/html/man/tiff2pdf.1.html b/tiff/html/man/tiff2pdf.1.html deleted file mode 100644 index 80e0d55..0000000 --- a/tiff/html/man/tiff2pdf.1.html +++ /dev/null @@ -1,609 +0,0 @@ - - - - - - -TIFF2PDF - - - -

    TIFF2PDF

    -NAME
    -SYNOPSIS
    -DESCRIPTION
    -OPTIONS
    -EXAMPLES
    -BUGS
    -SEE ALSO
    - -
    - -

    NAME

    - - - - - -
    -

    tiff2pdf − convert a TIFF image to a PDF -document

    -
    - -

    SYNOPSIS

    - - - - - -
    -

    tiff2pdf [ options ] input.tiff

    -
    - -

    DESCRIPTION

    - - - - - -
    -

    tiff2pdf opens a TIFF image and writes a PDF -document to standard output.

    - -

    The program converts one TIFF file to one PDF file, -including multiple page TIFF files, tiled TIFF files, black -and white. grayscale, and color TIFF files that contain data -of TIFF photometric interpretations of bilevel, grayscale, -RGB, YCbCr, CMYK separation, and ICC L*a*b* as supported by -libtiff and PDF.

    - -

    If you have multiple TIFF files to convert into one PDF -file then use tiffcp or other program to concatenate -the files into a multiple page TIFF file. If the input TIFF -file is of huge dimensions (greater than 10000 pixels height -or width) convert the input image to a tiled TIFF if it is -not already.

    - -

    The standard output is standard output. Set the output -file name with the −o output.pdf -option.

    - -

    All black and white files are compressed into a single -strip CCITT G4 Fax compressed PDF, unless tiled, where tiled -black and white images are compressed into tiled CCITT G4 -Fax compressed PDF, libtiff CCITT support is -assumed.

    - -

    Color and grayscale data can be compressed using either -JPEG compression, ITU-T T.81, or Zip/Deflate LZ77 -compression. Set the compression type using the -−j or −z options. JPEG compression -support requires that libtiff be configured with JPEG -support, and Zip/Deflate compression support requires that -libtiff be configured with Zip support, in -tiffconf.h. Use only one or the other of −j and -−z.

    - -

    If the input TIFF contains single strip CCITT G4 Fax -compressed information, then that is written to the PDF file -without transcoding, unless the options of no compression -and no passthrough are set, −d and -−n.

    - -

    If the input TIFF contains JPEG or single strip -Zip/Deflate compressed information, and they are configured, -then that is written to the PDF file without transcoding, -unless the options of no compression and no passthrough are -set.

    - -

    The default page size upon which the TIFF image is placed -is determined by the resolution and extent of the image -data. Default values for the TIFF image resolution can be -set using the −x and −y options. -The page size can be set using the −p option -for paper size, or −w and −l for -paper width and length, then each page of the TIFF image is -centered on its page. The distance unit for default -resolution and page width and length can be set by the -−u option, the default unit is inch.

    - -

    Various items of the output document information can be -set with the −e, −c, -−a, −t, −s, and -−k options. Setting the argument of the option -to "" for these tags causes the relevant document -information field to be not written. Some of the document -information values otherwise get their information from the -input TIFF image, the software, author, document name, and -image description.

    - -

    The Portable Document Format (PDF) specification is -copyrighted by Adobe Systems, Incorporated.

    -
    - -

    OPTIONS

    - - - - - -
    -

    −o output-file

    - - - - - -
    -

    Set the output to go to file. output-file

    -
    - - - - - - - - - - - - -
    - -

    −j

    -    		 - -

    Compress with JPEG (requires libjpeg configured -with libtiff).

    -
    - -

    −z

    -    		 - -

    Compress with Zip/Deflate (requires zlib -configured with libtiff).

    -
    - - - - - -
    -

    −q quality

    - - - - - -
    -

    Set the compression quality, 1-100 for JPEG.

    -
    - - - - - - - - - - - - - - - - - - - - - - -
    - -

    −n

    -    		 - -

    Do not allow data to be converted without uncompressing, -no compressed data passthrough.

    -
    - -

    −b

    -    		 - -

    Set PDF ‘‘Interpolate’’ user -preference.

    -
    - -

    −d

    -    		 - -

    Do not compress (decompress).

    -
    - -

    −i

    -    		 - -

    Invert colors.

    -
    - - - - - -
    -

    −p paper-size

    - - - - - -
    -

    Set paper size, e.g., letter, legal, -A4.

    -
    - - - - - -
    -

    −u [i|m]

    - - - - - -
    -

    Set distance unit, i for inch, m for -centimeter.

    -
    - - - - - -
    -

    −w width

    - - - - - -
    -

    Set width in units.

    -
    - - - - - -
    -

    −l length

    - - - - - -
    -

    Set length in units.

    -
    - - - - - -
    -

    −x xres

    - - - - - -
    -

    Set x/width resolution default.

    -
    - - - - - -
    -

    −y yres

    - - - - - -
    -

    Set y/length resolution default.

    -
    - - - - - -
    -

    −r [d|o]

    - - - - - -
    -

    Set d for resolution default for images without -resolution, o for resolution override for all -images.

    -
    - - - - - - - - -
    - -

    −f

    -    		 - -

    Set PDF ‘‘Fit Window’’ user -preference.

    -    		 -
    - - - - - -
    -

    −e YYYYMMDDHHMMSS

    - - - - - -
    -

    Set document information date, overrides image or current -date/time default, YYYYMMDDHHMMSS.

    -
    - - - - - -
    -

    −c creator

    - - - - - -
    -

    Set document information creator, overrides image -software default.

    -
    - - - - - -
    -

    −a author

    - - - - - -
    -

    Set document information author, overrides image artist -default.

    -
    - - - - - -
    -

    −t title

    - - - - - -
    -

    Set document information title, overrides image document -name default.

    -
    - - - - - -
    -

    −s subject

    - - - - - -
    -

    Set document information subject, overrides image image -description default.

    -
    - - - - - -
    -

    −k keywords

    - - - - - -
    -

    Set document information keywords.

    -
    - - - - - - - - -
    - -

    −h

    -    		 - -

    List usage reminder to stderr and exit.

    -    		 -
    - -

    EXAMPLES

    - - - - - -
    -

    The following example would generate the file output.pdf -from input.tiff.

    - - - - - -
    -
    tiff2pdf −o output.pdf input.tiff
-
    -
    - - - - - - -
    -

    The following example would generate PDF output from -input.tiff and write it to standard output.

    - - - - - -
    -
    tiff2pdf input.tiff
-
    -
    - - - - - - -
    -

    The following example would generate the file output.pdf -from input.tiff, putting the image pages on a letter sized -page, compressing the output with JPEG, with JPEG quality -75, setting the title to -‘‘Document’’, and setting the -‘‘Fit Window’’ option.

    - - - - - -
    -
    tiff2pdf −p letter −j −q 75 −t "Document" −f −o output.pdf input.tiff
-
    -
    - -

    BUGS

    - - - - - - -
    -

    Please report bugs via the web interface at

    -
    - - - - - -
    - -

    http://bugzilla.remotesensing.org/enter_bug.cgi?product=libtiff

    -
    - -

    SEE ALSO

    - - - - - -
    -

    libtiff(3), tiffcp(1), -tiff2ps(1)

    - -

    Libtiff library home page: -http://www.remotesensing.org/libtiff/

    -
    -
    - - diff --git a/tiff/html/man/tiff2ps.1.html b/tiff/html/man/tiff2ps.1.html deleted file mode 100644 index e13bb8f..0000000 --- a/tiff/html/man/tiff2ps.1.html +++ /dev/null @@ -1,532 +0,0 @@ - - - - - - -TIFF2PS - - - -

    TIFF2PS

    -NAME
    -SYNOPSIS
    -DESCRIPTION
    -OPTIONS
    -EXAMPLES
    -BUGS
    -SEE ALSO
    - -
    - -

    NAME

    - - - - - -
    -

    tiff2ps − convert a TIFF image to -PostScript™

    -
    - -

    SYNOPSIS

    - - - - - -
    -

    tiff2ps [ options ] input.tif -...

    -
    - -

    DESCRIPTION

    - - - - - -
    -

    tiff2ps reads TIFF images and -writes PostScript or Encapsulated PostScript (EPS) on the -standard output. By default, tiff2ps writes -Encapsulated PostScript for the first image in the specified -TIFF image file.

    - -

    By default, tiff2ps will generate PostScript that -fills a printed area specified by the TIFF -tags in the input file. If the file does not contain -XResolution or YResolution tags, then the -printed area is set according to the image dimensions. The -−w and −h options (see below) can -be used to set the dimensions of the printed area in inches; -overriding any relevant TIFF tags.

    - -

    The PostScript generated for RGB, palette, -and CMYK images uses the colorimage -operator. The PostScript generated for greyscale and bilevel -images uses the image operator. When the -colorimage operator is used, PostScript code to -emulate this operator on older PostScript printers is also -generated. Note that this emulation code can be very -slow.

    - -

    Color images with associated alpha data are composited -over a white background.

    -
    - -

    OPTIONS

    - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
    - -

    −1

    -    		 - -

    Generate PostScript Level 1 (the default).

    -    		 -
    - -

    −2

    -    		 - -

    Generate PostScript Level 2.

    -    		 -
    - -

    −3

    -    		 - -

    Generate PostScript Level 3. It basically allows one to -use the /flateDecode filter for ZIP compressed TIFF -images.

    -    		 -
    - -

    −a

    -    		 - -

    Generate output for all IFDs (pages) in the input -file.

    -    		 -
    - -

    −b

    -    		 - -

    Specify the bottom margin for the output (in inches). -This does not affect the height of the printed image.

    -    		 -
    - -

    −c

    -    		 - -

    Center the image in the output. This option only shows -an effect if both the −w and the -−h option are given.

    -    		 -
    - -

    −d

    -    		 - -

    Set the initial TIFF directory to the -specified directory number. (NB: Directories are numbered -starting at zero.) This option is useful for selecting -individual pages in a multi-page (e.g. facsimile) file.

    -    		 -
    - -

    −e

    -    		 - -

    Force the generation of Encapsulated PostScript (implies -−z).

    -    		 -
    - -

    −h

    -    		 - -

    Specify the vertical size of the printed area (in -inches).

    -    		 -
    - -

    −H

    -    		 - -

    Specify the maximum height of image (in inches). Images -with larger sizes will be split in several pages. Option -−L may be used for specifying size of split -images overlapping.

    -    		 -
    - -

    −i

    -    		 - -

    Enable/disable pixel interpolation. This option requires -a single numeric value: zero to disable pixel interpolation -and non-zero to enable. The default is enabled.

    -    		 -
    - -

    −L

    -    		 - -

    Specify the size of overlapping for split images (in -inches). Used in conjunction with −H -option.

    -    		 -
    - -

    −l

    -    		 - -

    Specify the left margin for the output (in inches). This -does not affect the width of the printed image.

    -    		 -
    - -

    −m

    -    		 - -

    Where possible render using the imagemask -PostScript operator instead of the image operator. -When this option is specified tiff2ps will use -imagemask for rendering 1 bit deep images. If this -option is not specified or if the image depth is greater -than 1 then the image operator is used.

    -    		 -
    - -

    −o

    -    		 - -

    Set the initial TIFF directory to the -IFD at the specified file offset. This option -is useful for selecting thumbnail images and the like which -are hidden using the SubIFD tag.

    -    		 -
    - -

    −p

    -    		 - -

    Force the generation of (non-Encapsulated) -PostScript.

    -    		 -
    - -

    −r

    -    		 - -

    Rotate image by 180 degrees.

    -    		 -
    - -

    −s

    -    		 - -

    Generate output for a single IFD (page) in the input -file.

    -    		 -
    - -

    −w

    -    		 - -

    Specify the horizontal size of the printed area (in -inches).

    -    		 -
    - -

    −x

    -    		 - -

    Override resolution units specified in the TIFF as -centimeters.

    -    		 -
    - -

    −y

    -    		 - -

    Override resolution units specified in the TIFF as -inches.

    -    		 -
    - -

    −z

    -    		 - -

    When generating PostScript Level 2, data is scaled so -that it does not image into the deadzone on a page -(the outer margin that the printing device is unable to -mark). This option suppresses this behavior. When PostScript -Level 1 is generated, data is imaged to the entire printed -page and this option has no affect.

    -    		 -
    - -

    EXAMPLES

    - - - - - -
    -

    The following generates PostScript Level 2 for all pages -of a facsimile:

    - - - - - -
    -
    tiff2ps −a2 fax.tif | lpr
-
    -
    - - - - - - -
    -

    Note also that if you have version 2.6.1 or newer of -Ghostscript then you can efficiently preview facsimile -generated with the above command.

    - -

    To generate Encapsulated PostScript for a the image at -directory 2 of an image use:

    - - - - - -
    -
    tiff2ps −d 1 foo.tif
-
    -
    - - - - - - -
    -

    (Notice that directories are numbered starting at -zero.)

    - -

    If you have a long image, it may be split in several -pages:

    - - - - - -
    -
    tiff2ps −h11 −w8.5 −H14 −L.5 foo.tif > foo.ps
-
    -
    - - - - - - -
    -

    The page size is set to 8.5x11 by −w and -−h options. We will accept a small amount of -vertical compression, so −H set to 14. Any -pages between 11 and 14 inches will be fit onto one page. -Pages longer than 14 inches are cut off at 11 and continued -on the next page. The −L.5 option says to -repeat a half inch on the next page (to improve -readability).

    -
    - -

    BUGS

    - - - - - -
    -

    Because PostScript does not support the notion of a -colormap, 8-bit palette images produce 24-bit PostScript -images. This conversion results in output that is six times -bigger than the original image and which takes a long time -to send to a printer over a serial line. Matters are even -worse for 4-, 2-, and 1-bit palette images.

    - -

    Does not handle tiled images when generating PostScript -Level I output.

    -
    - -

    SEE ALSO

    - - - - - -
    -

    pal2rgb(1), tiffinfo(1), tiffcp(1), -tiffgt(1), tiffmedian(1), tiff2bw(1), -tiffsv(1), libtiff(3)

    - -

    Libtiff library home page: -http://www.remotesensing.org/libtiff/

    -
    -
    - - diff --git a/tiff/html/man/tiff2rgba.1.html b/tiff/html/man/tiff2rgba.1.html deleted file mode 100644 index eec3968..0000000 --- a/tiff/html/man/tiff2rgba.1.html +++ /dev/null @@ -1,162 +0,0 @@ - - - - - - -TIFF2RGBA - - - -

    TIFF2RGBA

    -NAME
    -SYNOPSIS
    -DESCRIPTION
    -OPTIONS
    -SEE ALSO
    - -
    - -

    NAME

    - - - - - -
    -

    tiff2rgba − convert a TIFF image to -RGBA color space

    -
    - -

    SYNOPSIS

    - - - - - -
    -

    tiff2rgba [ options ] input.tif -output.tif

    -
    - -

    DESCRIPTION

    - - - - - -
    -

    Tiff2rgba converts a wide variety of TIFF images -into an RGBA TIFF image. This includes the ability to -translate different color spaces and photometric -interpretation into RGBA, support for alpha blending, and -translation of many different bit depths into a 32bit RGBA -image.

    - -

    Internally this program is implemented using the -TIFFReadRGBAImage() function, and it suffers any -limitations of that image. This includes limited support for -> 8 BitsPerSample images, and flaws with some esoteric -combinations of BitsPerSample, photometric interpretation, -block organization and planar configuration.

    - -

    The generated images are stripped images with four -samples per pixel (red, green, blue and alpha) or if the -−n flag is used, three samples per pixel (red, -green, and blue). The resulting images are always planar -configuration contiguous. For this reason, this program is a -useful utility for transform exotic TIFF files into a form -ingestible by almost any TIFF supporting software.

    -
    - -

    OPTIONS

    - - - - - - - - - - - - - - - - - - - - - - - - - - -
    - -

    −c

    -    		 - -

    Specify a compression scheme to use when writing image -data: −c none for no compression (the default), -−c packbits for the PackBits compression -algorithm, −c zip for the Deflate compression -algorithm, −c jpeg for the JPEG compression -algorithm, and −c lzw for Lempel-Ziv & -Welch.

    -    		 -
    - -

    −r

    -    		 - -

    Write data with a specified number of rows per strip; by -default the number of rows/strip is selected so that each -strip is approximately 8 kilobytes.

    -    		 -
    - -

    −b

    -    		 - -

    Process the image one block (strip/tile) at a time -instead of by reading the whole image into memory at once. -This may be necessary for very large images on systems with -limited RAM.

    -    		 -
    - -

    −n

    -    		 - -

    Drop the alpha component from the output file, producing -a pure RGB file. Currently this does not work if the -−b flag is also in effect.

    -    		 -
    - -

    SEE ALSO

    - - - - - -
    -

    tiff2bw(1), TIFFReadRGBAImage(3t), -libtiff(3)

    - -

    Libtiff library home page: -http://www.remotesensing.org/libtiff/

    -
    -
    - - diff --git a/tiff/html/man/tiffcmp.1.html b/tiff/html/man/tiffcmp.1.html deleted file mode 100644 index a9fca2f..0000000 --- a/tiff/html/man/tiffcmp.1.html +++ /dev/null @@ -1,156 +0,0 @@ - - - - - - -TIFFCMP - - - -

    TIFFCMP

    -NAME
    -SYNOPSIS
    -DESCRIPTION
    -OPTIONS
    -BUGS
    -SEE ALSO
    - -
    - -

    NAME

    - - - - - -
    -

    tiffcmp − compare two TIFF files

    -
    - -

    SYNOPSIS

    - - - - - -
    -

    tiffcmp [ options ] file1.tif -file2.tif

    -
    - -

    DESCRIPTION

    - - - - - -
    -

    Tiffcmp compares the tags and data in two files -created according to the Tagged Image File Format, Revision -6.0. The schemes used for compressing data in each file are -immaterial when data are compared−data are compared on -a scanline-by-scanline basis after decompression. Most -directory tags are checked; notable exceptions are: -GrayResponseCurve, ColorResponseCurve, and -ColorMap tags. Data will not be compared if any of -the BitsPerSample, SamplesPerPixel, or -ImageWidth values are not equal. By default, -tiffcmp will terminate if it encounters any -difference.

    -
    - -

    OPTIONS

    - - - - - - - - -
    - -

    −l

    -    		 - -

    List each byte of image data that differs between the -files.

    -    		 -
    - - - - - -
    -

    −z number

    - - - - - -
    -

    List specified number of image data bytes that differs -between the files.

    -
    - - - - - - - - -
    - -

    −t

    -    		 - -

    Ignore any differences in directory tags.

    -    		 -
    - -

    BUGS

    - - - - - -
    -

    Tags that are not recognized by the library are not -compared; they may also generate spurious diagnostics.

    - -

    The image data of tiled files is not compared, since the -TIFFReadScanline() function is used. An error will be -reported for tiled files.

    - -

    The pixel and/or sample number reported in differences -may be off in some exotic cases.

    -
    - -

    SEE ALSO

    - - - - - -
    -

    pal2rgb(1), tiffcp(1), -tiffmedian(1), libtiff(3TIFF)

    - -

    Libtiff library home page: -http://www.remotesensing.org/libtiff/

    -
    -
    - - diff --git a/tiff/html/man/tiffcp.1.html b/tiff/html/man/tiffcp.1.html deleted file mode 100644 index c7e2b09..0000000 --- a/tiff/html/man/tiffcp.1.html +++ /dev/null @@ -1,536 +0,0 @@ - - - - - - -TIFFCP - - - -

    TIFFCP

    -NAME
    -SYNOPSIS
    -DESCRIPTION
    -OPTIONS
    -EXAMPLES
    -SEE ALSO
    - -
    - -

    NAME

    - - - - - -
    -

    tiffcp − copy (and possibly convert) a -TIFF file

    -
    - -

    SYNOPSIS

    - - - - - -
    -

    tiffcp [ options ] src1.tif ... srcN.tif -dst.tif

    -
    - -

    DESCRIPTION

    - - - - - -
    -

    tiffcp combines one or more files created -according to the Tag Image File Format, Revision 6.0 into a -single TIFF file. Because the output file may -be compressed using a different algorithm than the input -files, tiffcp is most often used to convert between -different compression schemes.

    - -

    By default, tiffcp will copy all the understood -tags in a TIFF directory of an input file to -the associated directory in the output file.

    - -

    tiffcp can be used to reorganize the storage -characteristics of data in a file, but it is explicitly -intended to not alter or convert the image data content in -any way.

    -
    - -

    OPTIONS

    - - - - - -
    -

    −b image

    - - - - - -
    -

    subtract the following monochrome image from all others -processed. This can be used to remove a noise bias from a -set of images. This bias image is typically an image of -noise the camera saw with its shutter closed.

    -
    - - - - - - - - - - - - - - - - - - - - -
    - -

    −B

    -    		 - -

    Force output to be written with Big-Endian byte order. -This option only has an effect when the output file is -created or overwritten and not when it is appended to.

    -    		 -
    - -

    −C

    -    		 - -

    Suppress the use of ‘‘strip -chopping’’ when reading images that have a -single strip/tile of uncompressed data.

    -    		 -
    - -

    −c

    -    		 - -

    Specify the compression to use for data written to the -output file: none for no compression, packbits -for PackBits compression, lzw for Lempel-Ziv & -Welch compression, jpeg for baseline JPEG -compression, zip for Deflate compression, g3 -for CCITT Group 3 (T.4) compression, and g4 for CCITT -Group 4 (T.6) compression. By default tiffcp will -compress data according to the value of the -Compression tag found in the source file.

    -    		 -
    - - - - - -
    -

    The CCITT Group 3 and Group 4 compression -algorithms can only be used with bilevel data.

    - -

    Group 3 compression can be specified together with -several T.4-specific options: 1d for 1-dimensional -encoding, 2d for 2-dimensional encoding, and -fill to force each encoded scanline to be zero-filled -so that the terminating EOL code lies on a byte boundary. -Group 3-specific options are specified by appending a -‘‘:’’-separated list to the -‘‘g3’’ option; e.g. −c -g3:2d:fill to get 2D-encoded data with byte-aligned EOL -codes.

    - -

    LZW compression can be specified together -with a predictor value. A predictor value of 2 causes -each scanline of the output image to undergo horizontal -differencing before it is encoded; a value of 1 forces each -scanline to be encoded without differencing. LZW-specific -options are specified by appending a -‘‘:’’-separated list to the -‘‘lzw’’ option; e.g. −c -lzw:2 for LZW compression with horizontal -differencing.

    -
    - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
    - -

    −f

    -    		 - -

    Specify the bit fill order to use in writing output -data. By default, tiffcp will create a new file with -the same fill order as the original. Specifying −f -lsb2msb will force data to be written with the FillOrder -tag set to LSB2MSB, while −f -msb2lsb will force data to be written with the FillOrder -tag set to MSB2LSB.

    -    		 -
    - -

    −i

    -    		 - -

    Ignore non-fatal read errors and continue processing of -the input file.

    -    		 -
    - -

    −l

    -    		 - -

    Specify the length of a tile (in pixels). tiffcp -attempts to set the tile dimensions so that no more than 8 -kilobytes of data appear in a tile.

    -    		 -
    - -

    −L

    -    		 - -

    Force output to be written with Little-Endian byte -order. This option only has an effect when the output file -is created or overwritten and not when it is appended -to.

    -    		 -
    - -

    −M

    -    		 - -

    Suppress the use of memory-mapped files when reading -images.

    -    		 -
    - -

    −p

    -    		 - -

    Specify the planar configuration to use in writing image -data that has one 8-bit sample per pixel. By default, -tiffcp will create a new file with the same planar -configuration as the original. Specifying −p -contig will force data to be written with multi-sample -data packed together, while −p separate will -force samples to be written in separate planes.

    -    		 -
    - -

    −r

    -    		 - -

    Specify the number of rows (scanlines) in each strip of -data written to the output file. By default (or when value -0 is specified), tiffcp attempts to set the -rows/strip that no more than 8 kilobytes of data appear in a -strip. If you specify special value −1 it will -results in infinite number of the rows per strip. The entire -image will be the one strip in that case.

    -    		 -
    - -

    −s

    -    		 - -

    Force the output file to be written with data organized -in strips (rather than tiles).

    -    		 -
    - -

    −t

    -    		 - -

    Force the output file to be written with data organized -in tiles (rather than strips). options can be used to force -the resultant image to be written as strips or tiles of -data, respectively.

    -    		 -
    - -

    −w

    -    		 - -

    Specify the width of a tile (in pixels). tiffcp -attempts to set the tile dimensions so that no more than 8 -kilobytes of data appear in a tile. tiffcp attempts -to set the tile dimensions so that no more than 8 kilobytes -of data appear in a tile.

    -    		 -
    - -

    −x

    -    		 - -

    Force the output file to be written with PAGENUMBER value -in sequence.

    -    		 -
    - - - - - -
    -

    −,=character

    - - - - - -
    -

    substitute character for ‘,’ in -parsing image directory indices in files. This is necessary -if filenames contain commas. Note that −,= with -whitespace immediately following will disable the special -meaning of the ‘,’ entirely. See examples.

    -
    - -

    EXAMPLES

    - - - - - -
    -

    The following concatenates two files and writes the -result using LZW encoding:

    - - - - - -
    -
    tiffcp −c lzw a.tif b.tif result.tif
-
    -
    - - - - - - -
    -

    To convert a G3 1d-encoded TIFF to a -single strip of G4-encoded data the following might be -used:

    - - - - - -
    -
    tiffcp −c g4 −r 10000 g3.tif g4.tif
-
    -
    - - - - - - -
    -

    (1000 is just a number that is larger than the number of -rows in the source file.)

    - -

    To extract a selected set of images from a multi-image -TIFF file, the file name may be immediately followed by a -‘,’ separated list of image directory indices. -The first image is always in directory 0. Thus, to copy the -1st and 3rd images of image file -‘‘album.tif’’ to -‘‘result.tif’’:

    - - - - - -
    -
    tiffcp album.tif,0,2 result.tif
-
    -
    - - - - - - -
    -

    A trailing comma denotes remaining images in sequence. -The following command will copy all image with except the -first one:

    - - - - - -
    -
    tiffcp album.tif,1, result.tif
-
    -
    - - - - - - -
    -

    Given file ‘‘CCD.tif’’ whose -first image is a noise bias followed by images which include -that bias, subtract the noise from all those images -following it (while decompressing) with the -command:

    - - - - - -
    -
    tiffcp −c none −b CCD.tif CCD.tif,1, result.tif
-
    -
    - - - - - - -
    -

    If the file above were named -‘‘CCD,X.tif’’, the −,= -option would be required to correctly parse this filename -with image numbers, as follows:

    - - - - - -
    -
    tiffcp −c none −,=% −b CCD,X.tif CCD,X%1%.tif result.tif
-
-
    -
    - -

    SEE ALSO

    - - - - - - -
    -

    pal2rgb(1), tiffinfo(1), tiffcmp(1), -tiffmedian(1), tiffsplit(1), -libtiff(3TIFF)

    - -

    Libtiff library home page: -http://www.remotesensing.org/libtiff/

    -
    -
    - - diff --git a/tiff/html/man/tiffcrop.1.html b/tiff/html/man/tiffcrop.1.html deleted file mode 100644 index 4c25c29..0000000 --- a/tiff/html/man/tiffcrop.1.html +++ /dev/null @@ -1,851 +0,0 @@ - - - - - - -TIFFCROP - - - -

    TIFFCROP

    -NAME
    -SYNOPSIS
    -DESCRIPTION
    -OPTIONS
    -EXAMPLES
    -SEE ALSO
    - -
    - -

    NAME

    - - - - - -
    -

    tiffcrop − copy, convert, crop, extract, or process -a TIFF file

    -
    - -

    SYNOPSIS

    - - - - - -
    -

    tiffcrop [ options ] src1.tif ... -srcN.tif dst.tif

    -
    - -

    DESCRIPTION

    - - - - - -
    -

    tiffcrop combines one or more files created -according to the Tag Image File Format, Revision 6.0 into a -single TIFF file. The output file may be -compressed using a different algorithm than the input files. -tiffcrop is most often used to extract portions of an -image for processing with bar code recognizer or OCR -software when that software cannot restrict the region of -interest to a specific portion of the image or to improve -efficiency when the regions of interest must be rotated. It -can also be used to subdivide all or part of a processed -image into smaller sections.

    - -

    Functions are applied to the input image in the following -order:

    - - - - - -
    -
    cropping, fixed area extraction, zones, inversion, mirroring, rotation.
-
    -
    - - - - - - -
    -

    Functions are applied to the output image in the -following order:

    - - - - - -
    -

    output resolution, output margins, rows and columns -or page size divisions, orientation options, strip, -tile, byte order, and compression options.

    - - - - - -
    -

    By default, tiffcrop will copy all the understood -tags in a TIFF directory of an input file to -the associated directory in the output file. Options can be -used to force the resultant image to be written as strips or -tiles of data, respectively.

    - -

    tiffcrop can be used to reorganize the storage -characteristics of data in a file, and to reorganize, -extract, rotate, and otherwise process the image data as -specified at the same time whereas tiffcp does not alter the -image data itself.

    -
    - -

    OPTIONS

    - - - - - -
    -

    −N odd|even|#,#-#,#|last

    - - - - - -
    -

    Specify one or more series or range(s) of images within -file to process. The words odd or even may be -used to specify all odd or even numbered images. The word -last may be used in place of a number in the sequence -to indicate the final image in the file without knowing how -many images there are. Ranges of images may be specified -with a dash and multiple sets can be indicated by joining -them in a comma-separated list. eg. use −N -1,5-7,last to process the 1st, 5th through 7th, and -final image in the file.

    -
    - - - - - -
    -

    −E top|bottom|left|right

    - - - - - -
    -

    Specify the top, bottom, left, or right edge as the -reference from which to calcuate the width and length of -crop regions or sequence of postions for zones. May be -abbreviated to first letter.

    -
    - - - - - -
    -

    −U in|cm|px

    - - - - - -
    -

    Specify the type of units to apply to dimensions for -margins and crop regions for input and output images. Inches -or centimeters are converted to pixels using the resolution -unit specified in the TIFF file (which defaults to inches if -not specified in the IFD).

    -
    - - - - - -
    -

    −m #,#,#,#

    - - - - - -
    -

    Specify margins to be removed from the input image. The -order must be top, left, bottom, right with only commas -separating the elements of the list. Margins are scaled -according to the current units and removed before any other -extractions are computed. Captial M was in use.

    -
    - - - - - - - - - - - - - - -
    - -

    −X #

    -    		 - -

    Set the horizontal (X-axis) dimension of a region to -extract relative to the specified origin reference. If the -origin is the top or bottom edge, the X axis value will be -assumed to start at the left edge.

    -    		 -
    - -

    −Y #

    -    		 - -

    Set the vertical (Y-axis) dimension of a region to -extract relative to the specified origin reference. If the -origin is the left or right edge, the Y axis value will be -assumed to start at the top.

    -    		 -
    - - - - - -
    -

    −Z #:#,#:#

    - - - - - -
    -

    Specify zones of the image designated as position X of Y -equal sized portions measured from the reference edge, eg -1:3 would be first third of the image starting from the -reference edge minus any margins specified for the confining -edges. Multiple zones can be specified as a comma separated -list but they must reference the same edge. To extract the -top quarter and the bottom third of an image you would use -−Z 1:4,3:3.

    -
    - - - - - -
    -

    −F horiz|vert

    - - - - - -
    -

    Flip, ie mirror, the image or extracted region -horizontally or vertically.

    -
    - - - - - -
    -

    −R 90|180|270

    - - - - - -
    -

    Rotate the image or extracted region 90, 180, or 270 -degrees clockwise.

    -
    - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
    - -

    −I

    -    		 - -

    Invert the colorspace values for grayscale and bilevel -images. This would be used to correct negative images that -have incorrect PHOTMETRIC INTERPRETATION tags. No support -for color images.

    -    		 -
    - -

    −H #

    -    		 - -

    Set the horizontal resolution of output images to # -expressed in the current units.

    -    		 -
    - -

    −V #

    -    		 - -

    Set the vertical resolution of the output images to # -expressed in the current units.

    -    		 -
    - -

    −J #

    -    		 - -

    Set the horizontal margin of an output page size to # -expressed in the current units.

    -    		 -
    - -

    −K #

    -    		 - -

    Set the vertical margin of an output page size to # -expressed in the current units.

    -    		 -
    - - - - - -
    -

    −O portrait|landscape|auto

    - - - - - -
    -

    Set the output orientation of the pages or sections. Auto -will use the arrangement that requires the fewest pages.

    -
    - - - - - -
    -

    −S cols:rows

    - - - - - -
    -

    Divide each image into cols across and rows down equal -sections.

    -
    - - - - - -
    -

    −P page

    - - - - - -
    -

    Format the output images to fit on page size paper. Use --P list to show the supported page sizes and dimensions.

    -
    - - - - - - - - - - - - - - - - - - - - -
    - -

    −B

    -    		 - -

    Force output to be written with Big-Endian byte order. -This option only has an effect when the output file is -created or overwritten and not when it is appended to.

    -    		 -
    - -

    −C

    -    		 - -

    Suppress the use of ‘‘strip -chopping’’ when reading images that have a -single strip/tile of uncompressed data.

    -    		 -
    - -

    −c

    -    		 - -

    Specify the compression to use for data written to the -output file: none for no compression, packbits -for PackBits compression, lzw for Lempel-Ziv & -Welch compression, jpeg for baseline JPEG -compression, zip for Deflate compression, g3 -for CCITT Group 3 (T.4) compression, and g4 for CCITT -Group 4 (T.6) compression. By default tiffcrop will -compress data according to the value of the -Compression tag found in the source file.

    -    		 -
    - - - - - -
    -

    The CCITT Group 3 and Group 4 compression -algorithms can only be used with bilevel data.

    - -

    Group 3 compression can be specified together with -several T.4-specific options: 1d for 1-dimensional -encoding, 2d for 2-dimensional encoding, and -fill to force each encoded scanline to be zero-filled -so that the terminating EOL code lies on a byte boundary. -Group 3-specific options are specified by appending a -‘‘:’’-separated list to the -‘‘g3’’ option; e.g. −c -g3:2d:fill to get 2D-encoded data with byte-aligned EOL -codes.

    - -

    LZW compression can be specified together -with a predictor value. A predictor value of 2 causes -each scanline of the output image to undergo horizontal -differencing before it is encoded; a value of 1 forces each -scanline to be encoded without differencing. LZW-specific -options are specified by appending a -‘‘:’’-separated list to the -‘‘lzw’’ option; e.g. −c -lzw:2 for LZW compression with horizontal -differencing.

    -
    - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
    - -

    −f

    -    		 - -

    Specify the bit fill order to use in writing output -data. By default, tiffcrop will create a new file -with the same fill order as the original. Specifying -−f lsb2msb will force data to be written with -the FillOrder tag set to LSB2MSB, while -−f msb2lsb will force data to be written with -the FillOrder tag set to MSB2LSB.

    -    		 -
    - -

    −i

    -    		 - -

    Ignore non-fatal read errors and continue processing of -the input file.

    -    		 -
    - -

    −l

    -    		 - -

    Specify the length of a tile (in pixels). -tiffcrop attempts to set the tile dimensions so that -no more than 8 kilobytes of data appear in a tile.

    -    		 -
    - -

    −L

    -    		 - -

    Force output to be written with Little-Endian byte -order. This option only has an effect when the output file -is created or overwritten and not when it is appended -to.

    -    		 -
    - -

    −M

    -    		 - -

    Suppress the use of memory-mapped files when reading -images.

    -    		 -
    - -

    −p

    -    		 - -

    Specify the planar configuration to use in writing image -data that has more than one 8-bit sample per pixel. By -default, tiffcrop will create a new file with the -same planar configuration as the original. Specifying -−p contig will force data to be written with -multi-sample data packed together, while −p -separate will force samples to be written in separate -planes.

    -    		 -
    - -

    −r

    -    		 - -

    Specify the number of rows (scanlines) in each strip of -data written to the output file. By default (or when value -0 is specified), tiffcrop attempts to set the -rows/strip that no more than 8 kilobytes of data appear in a -strip. If you specify the special value -1 it will -results in infinite number of the rows per strip. The entire -image will be the one strip in that case.

    -    		 -
    - -

    −s

    -    		 - -

    Force the output file to be written with data organized -in strips (rather than tiles).

    -    		 -
    - -

    −t

    -    		 - -

    Force the output file to be written with data organized -in tiles (rather than strips).

    -    		 -
    - -

    −w

    -    		 - -

    Specify the width of a tile (in pixels). tiffcrop -attempts to set the tile dimensions so that no more than 8 -kilobytes of data appear in a tile. tiffcrop attempts -to set the tile dimensions so that no more than 8 kilobytes -of data appear in a tile.

    -    		 -
    - - - - - -
    -

    −,={character}

    - - - - - -
    -

    substitute {character} for ’,’ in parsing -image directory indices in files. This is necessary if -filenames contain commas. Note that ’,=’ with -whitespace immediately following will disable the special -meaning of the ’,’ entirely. See examples.

    -
    - -

    EXAMPLES

    - - - - - -
    -

    The following concatenates two files and writes the -result using LZW encoding:

    - - - - - -
    -
    tiffcrop -c lzw a.tif b.tif result.tif
-
    -
    - - - - - - -
    -

    To convert a G3 1d-encoded TIFF to a -single strip of G4-encoded data the following might be -used:

    - - - - - -
    -
    tiffcrop -c g4 -r 10000 g3.tif g4.tif
-
    -
    - - - - - - -
    -

    (1000 is just a number that is larger than the number of -rows in the source file.)

    - -

    To extract a selected set of images from a multi-image -TIFF file use the -N option described above. Thus, to copy -the 1st and 3rd images of image file "album.tif" -to "result.tif":

    - - - - - -
    -
    tiffcrop -N 1,3 album.tif result.tif
-
    -
    - - - - - - -
    -

    Invert a bilevel image scan of a microfilmed document and -crop off margins of 0.25 inches on the left and right, 0.5 -inch on the top, nad 0.75 inch on the bottom. From the -remaining portion of the image, select the second and third -quarters, ie, one half of the area left from the center to -each margin.

    - - - - - -
    -
    tiffcrop -U in -m 0.5,0.25,0.75,0.25 -E left -Z 2:4,3:4 -I MicrofilmNegative.tif MicrofilmPostiveCenter.tif
-
    -
    - - - - - - -
    -

    Extract only the final image of a large Architectural E -sized multipage TIFF file and rotate it 90 degrees clockwise -while reformatting the output to fit on tabloid sized sheets -with one quarter of an inch on each side:

    - - - - - -
    -
    tiffcrop -N last -R 90 -O auto -P tabloid -U in -J 0.25 -K 0.25 -H 300 -V 300 Big-PlatMap.tif BigPlatMap-Tabloid.tif
-
    -
    - - - - - - -
    -

    The output images will have a specified resolution of 300 -dpi in both directions. The orientation of each page will be -determined by whichever choice requires the fewest pages. To -specify a specific orientation, use the portrait or -landscape option.

    -
    - -

    SEE ALSO

    - - - - - -
    -

    pal2rgb(1), tiffinfo(1), tiffcmp(1), -tiffcp(1), tiffmedian(1), tiffsplit(1), -libtiff(3TIFF)

    - -

    Libtiff library home page: -http://www.remotesensing.org/libtiff/

    -
    -
    - - diff --git a/tiff/html/man/tiffdither.1.html b/tiff/html/man/tiffdither.1.html deleted file mode 100644 index 2427a90..0000000 --- a/tiff/html/man/tiffdither.1.html +++ /dev/null @@ -1,183 +0,0 @@ - - - - - - -TIFFDITHER - - - -

    TIFFDITHER

    -NAME
    -SYNOPSIS
    -DESCRIPTION
    -OPTIONS
    -NOTES
    -SEE ALSO
    - -
    - -

    NAME

    - - - - - -
    -

    tiffdither − convert a greyscale image to bilevel -using dithering

    -
    - -

    SYNOPSIS

    - - - - - -
    -

    tiffdither [ options ] input.tif -output.tif

    -
    - -

    DESCRIPTION

    - - - - - -
    -

    tiffdither converts a single channel 8-bit -greyscale image to a bilevel image using Floyd-Steinberg -error propagation with thresholding.

    -
    - -

    OPTIONS

    - - - - - - - - -
    - -

    −c

    -    		 - -

    Specify the compression to use for data written to the -output file: none for no compression, packbits -for PackBits compression, lzw for Lempel-Ziv & -Welch compression, zip for Deflate compression, -g3 for CCITT Group 3 (T.4) compression, and g4 -for CCITT Group 4 (T.6) compression. By default -tiffdither will compress data according to the value -of the Compression tag found in the source file.

    -    		 -
    - - - - - -
    -

    The CCITT Group 3 and Group 4 compression -algorithms can only be used with bilevel data.

    - -

    Group 3 compression can be specified together with -several T.4-specific options: 1d for 1-dimensional -encoding, 2d for 2-dimensional encoding, and -fill to force each encoded scanline to be zero-filled -so that the terminating EOL code lies on a byte boundary. -Group 3-specific options are specified by appending a -‘‘:’’-separated list to the -‘‘g3’’ option; e.g. −c -g3:2d:fill to get 2D-encoded data with byte-aligned EOL -codes.

    - -

    LZW compression can be specified together -with a predictor value. A predictor value of 2 causes -each scanline of the output image to undergo horizontal -differencing before it is encoded; a value of 1 forces each -scanline to be encoded without differencing. LZW-specific -options are specified by appending a -‘‘:’’-separated list to the -‘‘lzw’’ option; e.g. −c -lzw:2 for LZW compression with horizontal -differencing.

    -
    - - - - - - - - - - - - - - -
    - -

    −f

    -    		 - -

    Specify the bit fill order to use in writing output -data. By default, tiffdither will create a new file -with the same fill order as the original. Specifying -−f lsb2msb will force data to be written with -the FillOrder tag set to LSB2MSB , -while −f msb2lsb will force data to be written -with the Fill- Order tag set to MSB2LSB -.

    -    		 -
    - -

    −t

    -    		 - -

    Set the threshold value for dithering. By default the -threshold value is 128.

    -    		 -
    - -

    NOTES

    - - - - - -
    -

    The dither algorithm is taken from the -tiffmedian(1) program (written by Paul Heckbert).

    -
    - -

    SEE ALSO

    - - - - - -
    -

    pal2rgb(1), fax2tiff(1), -tiffinfo(1), tiffcp(1), tiff2bw(1), -libtiff(3TIFF)

    - -

    Libtiff library home page: -http://www.remotesensing.org/libtiff/

    -
    -
    - - diff --git a/tiff/html/man/tiffdump.1.html b/tiff/html/man/tiffdump.1.html deleted file mode 100644 index abf0662..0000000 --- a/tiff/html/man/tiffdump.1.html +++ /dev/null @@ -1,145 +0,0 @@ - - - - - - -TIFFDUMP - - - -

    TIFFDUMP

    -NAME
    -SYNOPSIS
    -DESCRIPTION
    -OPTIONS
    -SEE ALSO
    - -
    - -

    NAME

    - - - - - -
    -

    tiffdump − print verbatim information about -TIFF files

    -
    - -

    SYNOPSIS

    - - - - - -
    -

    tiffdump [ options ] name ...

    -
    - -

    DESCRIPTION

    - - - - - -
    -

    tiffdump displays directory information from files -created according to the Tag Image File Format, Revision -6.0. The header of each TIFF file (magic -number, version, and first directory offset) is displayed, -followed by the tag contents of each directory in the file. -For each tag, the name, data type, count, and value(s) is -displayed. When the symbolic name for a tag or data type is -known, the symbolic name is displayed followed by it’s -numeric (decimal) value. Tag values are displayed enclosed -in ‘‘<>’’ characters -immediately preceded by the value of the count field. For -example, an ImageWidth tag might be displayed as -‘‘ImageWidth (256) SHORT (3) -1<800>’’.

    - -

    tiffdump is particularly useful for investigating -the contents of TIFF files that -libtiff does not understand.

    -
    - -

    OPTIONS

    - - - - - - - - -
    - -

    −h

    -    		 - -

    Force numeric data to be printed in hexadecimal rather -than the default decimal.

    -    		 -
    - - - - - -
    -

    −m items

    - - - - - -
    -

    Change the number of indirect data items that are -printed. By default, this will be 24.

    -
    - - - - - -
    -

    −o offset

    - - - - - -
    -

    Dump the contents of the IFD at the a -particular file offset. The file offset may be specified -using the usual C-style syntax; i.e. a leading -‘‘0x’’ for hexadecimal and a leading -‘‘0’’ for octal.

    -
    - -

    SEE ALSO

    - - - - - -
    -

    tiffinfo(1), libtiff(3TIFF)

    - -

    Libtiff library home page: -http://www.remotesensing.org/libtiff/

    -
    -
    - - diff --git a/tiff/html/man/tiffgt.1.html b/tiff/html/man/tiffgt.1.html deleted file mode 100644 index e8bd4b2..0000000 --- a/tiff/html/man/tiffgt.1.html +++ /dev/null @@ -1,551 +0,0 @@ - - - - - - -TIFFGT - - - -

    TIFFGT

    -NAME
    -SYNOPSIS
    -DESCRIPTION
    -OPTIONS
    -BUGS
    -SEE ALSO
    - -
    - -

    NAME

    - - - - - -
    -

    tiffgt − display an image stored in a -TIFF file (Silicon Graphics version)

    -
    - -

    SYNOPSIS

    - - - - - -
    -

    tiffgt [ options ] input.tif ...

    -
    - -

    DESCRIPTION

    - - - - - -
    -

    tiffgt displays one or more images stored using -the Tag Image File Format, Revision 6.0. Each image is -placed in a fixed size window that the user must position on -the display (unless configured otherwise through X -defaults). If the display has fewer than 24 bitplanes, or if -the image does not warrant full color, then -RGB color values are mapped to the closest -values that exist in the colormap (this is done using the -rgbi routine found in the graphics utility library -−lgutil.)

    - -

    tiffgt correctly handles files with any of the -following characteristics:

    - - - - - - - - - - - - - - - - - - - - - - -
    - -

    BitsPerSample

    -    		 - -

    1, 2, 4, 8, 16

    -
    - -

    SamplesPerPixel

    -    		 - -

    1, 3, 4 (the 4th sample is ignored)

    -
    - -

    PhotometricInterpretation

    -    		 - -

    0 (min-is-white), 1 (min-is-black), 2 (RGB), 3 -(palette), 6 (YCbCr)

    -
    - -

    PlanarConfiguration

    -    		 - -

    1 (contiguous), 2 (separate)

    -
    - -

    Orientation

    -    		 - -

    1 (top-left), 4 (bottom-left)

    -
    - - - - - -
    -

    Data may be organized as strips or tiles and may be -compressed with any of the compression algorithms supported -by the libtiff(3) library.

    - -

    For palette images (PhotometricInterpretation=3), -tiffgt inspects the colormap values and assumes -either 16-bit or 8-bit values according to the maximum -value. That is, if no colormap entry greater than 255 is -found, tiffgt assumes the colormap has only 8-bit -values; otherwise it assumes 16-bit values. This inspection -is done to handle old images written by previous (incorrect) -versions of libtiff.

    - -

    tiffgt can be used to display multiple images -one-at-a-time. The left mouse button switches the display to -the first image in the next file in the list of files -specified on the command line. The right mouse button -switches to the first image in the previous file in -the list. The middle mouse button causes the first image in -the first file specified on the command line to be -displayed. In addition the following keyboard commands are -recognized:

    -
    - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
    - -

    b

    -    		 - -

    Use a PhotometricInterpretation of MinIsBlack in -displaying the current image.

    -    		 -
    - -

    l

    -    		 - -

    Use a FillOrder of lsb-to-msb in decoding the -current image.

    -    		 -
    - -

    m

    -    		 - -

    Use a FillOrder of msb-to-lsb in decoding the -current image.

    -    		 -
    - -

    c

    -    		 - -

    Use a colormap visual to display the current image.

    -    		 -
    - -

    r

    -    		 - -

    Use a true color (24-bit RGB) visual to display the -current image.

    -    		 -
    - -

    w

    -    		 - -

    Use a PhotometricInterpretation of MinIsWhite in -displaying the current image.

    -    		 -
    - -

    W

    -    		 - -

    Toggle (enable/disable) display of warning messages from -the TIFF library when decoding images.

    -    		 -
    - -

    E

    -    		 - -

    Toggle (enable/disable) display of error messages from -the TIFF library when decoding images.

    -    		 -
    - -

    z

    -    		 - -

    Reset all parameters to their default settings -(FillOrder, PhotometricInterpretation, -handling of warnings and errors).

    -    		 -
    - -

    PageUp

    -    		 - -

    Display the previous image in the current file or the -last image in the previous file.

    -    		 -
    - - - - - -
    -

    PageDown

    - - - - - -
    -

    Display the next image in the current file or the first -image in the next file.

    -
    - - - - - - - - - - - - - - -
    - -

    Home

    -    		 - -

    Display the first image in the current file.

    -    		 -
    - -

    End

    -    		 - -

    Display the last image in the current file -(unimplemented).

    -    		 -
    - -

    OPTIONS

    - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
    - -

    −c

    -    		 - -

    Force image display in a colormap window.

    -    		 -
    - -

    −d

    -    		 - -

    Specify an image to display by directory number. By -default the first image in the file is displayed. -Directories are numbered starting at zero.

    -    		 -
    - -

    −e

    -    		 - -

    Enable reporting of error messages from the -TIFF library. By default tiffgt -silently ignores images that cannot be read.

    -    		 -
    - -

    −f

    -    		 - -

    Force tiffgt to run as a foreground process. By -default tiffgt will place itself in the background -once it has opened the requested image file.

    -    		 -
    - -

    −l

    -    		 - -

    Force the presumed bit ordering to be LSB -to MSB.

    -    		 -
    - -

    −m

    -    		 - -

    Force the presumed bit ordering to be MSB -to LSB.

    -    		 -
    - -

    −o

    -    		 - -

    Specify an image to display by directory offset. By -default the first image in the file is displayed. -Directories offsets may be specified using C-style syntax; -i.e. a leading ‘‘0x’’ for -hexadecimal and a leading ‘‘0’’ for -octal.

    -    		 -
    - -

    −p

    -    		 - -

    Override the value of the -PhotometricInterpretation tag; the parameter may be -one of: miniswhite, minisblack, rgb, -palette, mask, separated, ycbcr, -and cielab.

    -    		 -
    - -

    −r

    -    		 - -

    Force image display in a full color window.

    -    		 -
    - -

    −s

    -    		 - -

    Stop on the first read error. By default all errors in -the input data are ignored and tiffgt does it’s -best to display as much of an image as possible.

    -    		 -
    - -

    −w

    -    		 - -

    Enable reporting of warning messages from the -TIFF library. By default tiffgt -ignores warning messages generated when reading an -image.

    -    		 -
    - -

    −v

    -    		 - -

    Place information in the title bar describing what type -of window (full color or colormap) is being used, the name -of the input file, and the directory index of the image (if -non-zero). By default, the window type is not shown in the -title bar.

    -    		 -
    - -

    BUGS

    - - - - - -
    -

    Images wider and taller than the display are silently -truncated to avoid crashing old versions of the window -manager.

    -
    - -

    SEE ALSO

    - - - - - -
    -

    tiffdump(1), tiffinfo(1), tiffcp(1), -libtiff(3TIFF)

    - -

    Libtiff library home page: -http://www.remotesensing.org/libtiff/

    -
    -
    - - diff --git a/tiff/html/man/tiffinfo.1.html b/tiff/html/man/tiffinfo.1.html deleted file mode 100644 index 4863ed3..0000000 --- a/tiff/html/man/tiffinfo.1.html +++ /dev/null @@ -1,196 +0,0 @@ - - - - - - -TIFFINFO - - - -

    TIFFINFO

    -NAME
    -SYNOPSIS
    -DESCRIPTION
    -OPTIONS
    -SEE ALSO
    - -
    - -

    NAME

    - - - - - -
    -

    tiffinfo − print information about -TIFF files

    -
    - -

    SYNOPSIS

    - - - - - -
    -

    tiffinfo [ options ] input.tif -...

    -
    - -

    DESCRIPTION

    - - - - - -
    -

    Tiffinfo displays information about files created -according to the Tag Image File Format, Revision 6.0. By -default, the contents of each TIFF directory -in each file is displayed, with the value of each tag shown -symbolically (where sensible).

    -
    - -

    OPTIONS

    - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
    - -

    −c

    -    		 - -

    Display the colormap and color/gray response curves, if -present.

    -    		 -
    - -

    −D

    -    		 - -

    In addition to displaying the directory tags, read and -decompress all the data in each image (but not display -it).

    -    		 -
    - -

    −d

    -    		 - -

    In addition to displaying the directory tags, print each -byte of decompressed data in hexadecimal.

    -    		 -
    - -

    −j

    -    		 - -

    Display any JPEG -related tags that are -present.

    -    		 -
    - -

    −o

    -    		 - -

    Set the initial TIFF directory according -to the specified file offset. The file offset may be -specified using the usual C-style syntax; i.e. a leading -‘‘0x’’ for hexadecimal and a leading -‘‘0’’ for octal.

    -    		 -
    - -

    −s

    -    		 - -

    Display the offsets and byte counts for each data strip -in a directory.

    -    		 -
    - -

    −z

    -    		 - -

    Enable strip chopping when reading image data.

    -    		 -
    - -

    −#

    -    		 - -

    Set the initial TIFF directory to -#.

    -    		 -
    - -

    SEE ALSO

    - - - - - -
    -

    pal2rgb(1), tiffcp(1), tiffcmp(1), -tiffmedian(1), libtiff(3TIFF)

    - -

    Libtiff library home page: -http://www.remotesensing.org/libtiff/

    -
    -
    - - diff --git a/tiff/html/man/tiffmedian.1.html b/tiff/html/man/tiffmedian.1.html deleted file mode 100644 index 5961317..0000000 --- a/tiff/html/man/tiffmedian.1.html +++ /dev/null @@ -1,183 +0,0 @@ - - - - - - -TIFFMEDIAN - - - -

    TIFFMEDIAN

    -NAME
    -SYNOPSIS
    -DESCRIPTION
    -OPTIONS
    -NOTES
    -SEE ALSO
    - -
    - -

    NAME

    - - - - - -
    -

    tiffmedian − apply the median cut algorithm to data -in a TIFF file

    -
    - -

    SYNOPSIS

    - - - - - -
    -

    tiffmedian [ options ] input.tif -output.tif

    -
    - -

    DESCRIPTION

    - - - - - -
    -

    tiffmedian applies the median cut algorithm to an -RGB image in input.tif to generate a -palette image that is written to output.tif. The -generated colormap has, by default, 256 entries. The image -data is quantized by mapping each pixel to the closest color -values in the colormap.

    -
    - -

    OPTIONS

    - - - - - - - - -
    - -

    −c

    -    		 - -

    Specify the compression to use for data written to the -output file: none for no compression, packbits -for PackBits compression, lzw for Lempel-Ziv & -Welch compression, and zip for Deflate compression. -By default tiffmedian will compress data according to -the value of the Compression tag found in the source -file.

    -    		 -
    - - - - - -
    -

    LZW compression can be specified together -with a predictor value. A predictor value of 2 causes -each scanline of the output image to undergo horizontal -differencing before it is encoded; a value of 1 forces each -scanline to be encoded without differencing. LZW-specific -options are specified by appending a -‘‘:’’-separated list to the -‘‘lzw’’ option; e.g. −c -lzw:2 for LZW compression with horizontal -differencing.

    -
    - - - - - - - - - - - - - - - - - - - - -
    - -

    −C

    -    		 - -

    Specify the number of entries to use in the generated -colormap. By default all 256 entries/colors are used.

    -    		 -
    - -

    −f

    -    		 - -

    Apply Floyd-Steinberg dithering before selecting a -colormap entry.

    -    		 -
    - -

    −r

    -    		 - -

    Specify the number of rows (scanlines) in each strip of -data written to the output file. By default, -tiffmedian attempts to set the rows/strip that no -more than 8 kilobytes of data appear in a strip.

    -    		 -
    - -

    NOTES

    - - - - - -
    -

    This program is derived from Paul Heckbert’s -median program.

    -
    - -

    SEE ALSO

    - - - - - -
    -

    pal2rgb(1), tiffinfo(1), tiffcp(1), -tiffcmp(1), libtiff(3TIFF)

    - -

    Color Image Quantization for Frame Buffer Display, -Paul Heckbert, SIGGRAPH proceedings, 1982, pp. 297-307.

    - -

    Libtiff library home page: -http://www.remotesensing.org/libtiff/

    -
    -
    - - diff --git a/tiff/html/man/tiffset.1.html b/tiff/html/man/tiffset.1.html deleted file mode 100644 index fb4d0ed..0000000 --- a/tiff/html/man/tiffset.1.html +++ /dev/null @@ -1,176 +0,0 @@ - - - - - - -TIFFSET - - - -

    TIFFSET

    -NAME
    -SYNOPSIS
    -DESCRIPTION
    -OPTIONS
    -EXAMPLES
    -SEE ALSO
    - -
    - -

    NAME

    - - - - - -
    -

    tiffset − set a field in a TIFF -header

    -
    - -

    SYNOPSIS

    - - - - - -
    -

    tiffset [ options ] filename.tif

    -
    - -

    DESCRIPTION

    - - - - - -
    -

    Tiffset sets the value of a TIFF -header to a specified value.

    -
    - -

    OPTIONS

    - - - - - -
    -

    −s tagnumber [ count ] -value ...

    - - - - - -
    -

    Set the value of the named tag to the value or values -specified.

    -
    - - - - - -
    -

    −sf tagnumber filename

    - - - - - -
    -

    Set the value of the tag to the contents of filename. -This option is supported for ASCII tags only.

    -
    - -

    EXAMPLES

    - - - - - -
    -

    The following example sets the image description tag -(270) of a.tif to the contents of the file descrip:

    - - - - - -
    -
    tiffset −sf 270 descrip a.tif
-
    -
    - - - - - - -
    -

    The following example sets the artist tag (315) of a.tif -to the string -‘‘Anonymous’’:

    - - - - - -
    -
    tiffset −s 305 Anonymous a.tif
-
    -
    - - - - - - -
    -

    This example sets the resolution of the file a.tif to 300 -dpi:

    - - - - - -
    -
    tiffset −s 296 2 a.tif
-tiffset −s 282 300.0 a.tif
-tiffset −s 283 300.0 a.tif
-
    -
    - -

    SEE ALSO

    - - - - - - -
    -

    tiffdump(1), tiffinfo(1), tiffcp(1), -libtiff(3TIFF)

    - -

    Libtiff library home page: -http://www.remotesensing.org/libtiff/

    -
    -
    - - diff --git a/tiff/html/man/tiffsplit.1.html b/tiff/html/man/tiffsplit.1.html deleted file mode 100644 index adbc2f8..0000000 --- a/tiff/html/man/tiffsplit.1.html +++ /dev/null @@ -1,102 +0,0 @@ - - - - - - -TIFFSPLIT - - - -

    TIFFSPLIT

    -NAME
    -SYNOPSIS
    -DESCRIPTION
    -OPTIONS
    -BUGS
    -SEE ALSO
    - -
    - -

    NAME

    - - - - - -
    -

    tiffsplit − split a multi-image TIFF -into single-image TIFF files

    -
    - -

    SYNOPSIS

    - - - - - -
    -

    tiffsplit src.tif [ prefix ]

    -
    - -

    DESCRIPTION

    - - - - - -
    -

    tiffsplit takes a multi-directory (page) -TIFF file and creates one or more -single-directory (page) TIFF files from it. -The output files are given names created by concatenating a -prefix, a lexically ordered suffix in the range -[aaa-zzz], the suffix .tif (e.g. -xaaa.tif, xaab.tif, xzzz.tif). If a -prefix is not specified on the command line, the default -prefix of x is used.

    -
    - -

    OPTIONS

    - - - - - -
    -

    None.

    -
    - -

    BUGS

    - - - - - -
    -

    Only a select set of ‘‘known -tags’’ is copied when splitting.

    -
    - -

    SEE ALSO

    - - - - - -
    -

    tiffcp(1), tiffinfo(1), -libtiff(3TIFF)

    - -

    Libtiff library home page: -http://www.remotesensing.org/libtiff/

    -
    -
    - - diff --git a/tiff/html/man/tiffsv.1.html b/tiff/html/man/tiffsv.1.html deleted file mode 100644 index fb484b0..0000000 --- a/tiff/html/man/tiffsv.1.html +++ /dev/null @@ -1,207 +0,0 @@ - - - - - - -TIFFSV - - - -

    TIFFSV

    -NAME
    -SYNOPSIS
    -DESCRIPTION
    -OPTIONS
    -NOTE
    -BUGS
    -SEE ALSO
    - -
    - -

    NAME

    - - - - - -
    -

    tiffsv − save an image from the framebuffer in a -TIFF file (Silicon Graphics version)

    -
    - -

    SYNOPSIS

    - - - - - -
    -

    tiffsv [ options ] output.tif [ -x1 x2 y1 y2 ]

    -
    - -

    DESCRIPTION

    - - - - - -
    -

    tiffsv saves all or part of the framebuffer in a -file using the Tag Image File Format, Revision 6.0. By -default, the image is saved with data samples packed -(PlanarConfiguration=1), compressed with the -Lempel-Ziv & Welch algorithm (Compression=5), and -with each strip no more than 8 kilobytes. These -characteristics can be overridden, or explicitly specified -with the options described below.

    -
    - -

    OPTIONS

    - - - - - - - - - - - - - - -
    - -

    −b

    -    		 - -

    Save the image as a greyscale image as if it were -processed by tiff2bw(1). This option is included for -compatibility with the standard scrsave(6D) -program.

    -    		 -
    - -

    −c

    -    		 - -

    Specify the compression to use for data written to the -output file: none for no compression, packbits -for PackBits compression, jpeg for baseline JPEG -compression, zip for Deflate compression, and -lzw for Lempel-Ziv & Welch compression -(default).

    -    		 -
    - - - - - -
    -

    LZW compression can be specified together -with a predictor value. A predictor value of 2 causes -each scanline of the output image to undergo horizontal -differencing before it is encoded; a value of 1 forces each -scanline to be encoded without differencing. LZW-specific -options are specified by appending a -‘‘:’’-separated list to the -‘‘lzw’’ option; e.g. −c -lzw:2 for LZW compression with horizontal -differencing.

    -
    - - - - - - - - - - - - - - -
    - -

    −p

    -    		 - -

    Specify the planar configuration to use in writing image -data. By default, tiffsv will create a new file with -the data samples packed contiguously. Specifying −p -contig will force data to be written with multi-sample -data packed together, while −p separate will -force samples to be written in separate planes.

    -    		 -
    - -

    −r

    -    		 - -

    Specify the number of rows (scanlines) in each strip of -data written to the output file. By default, tiffsv -attempts to set the rows/strip that no more than 8 kilobytes -of data appear in a strip.

    -    		 -
    - -

    NOTE

    - - - - - -
    -

    Except for the use of TIFF, this program -is equivalent to the standard scrsave program. This -means, for example, that you can use it in conjunction with -the standard icut program simply by creating a link -called scrsave, or by creating a shell script called -scrsave that invokes tiffgt with the -appropriate options.

    -
    - -

    BUGS

    - - - - - -
    -

    If data are saved compressed and in separate planes, then -the rows in each strip is silently set to one to avoid -limitations in the libtiff(3TIFF) library.

    -
    - -

    SEE ALSO

    - - - - - -
    -

    scrsave(6D) pal2rgb(1), tiffdump(1), -tiffgt(1), tiffinfo(1), tiffcp(1), -tiffmedian(1), libtiff(3TIFF)

    - -

    Libtiff library home page: -http://www.remotesensing.org/libtiff/

    -
    -
    - - -- cgit v1.2.3