Description: correct some typos Author: Jörg Frings-Fürst Last-Update: 2015-09-30 --- This patch header follows DEP-3: http://dep.debian.net/deps/dep3/ Index: trunk/spectro/dispcal.c =================================================================== --- trunk.orig/spectro/dispcal.c +++ trunk/spectro/dispcal.c @@ -1937,7 +1937,7 @@ int main(int argc, char *argv[]) { /* Serial port flow control */ } else if (argv[fa][1] == 'W') { fa = nfa; - if (na == NULL) usage(0,"Paramater expected following -W"); + if (na == NULL) usage(0,"Parameter expected following -W"); if (na[0] == 'n' || na[0] == 'N') fc = fc_none; else if (na[0] == 'h' || na[0] == 'H') @@ -1960,13 +1960,13 @@ int main(int argc, char *argv[]) { /* Black point correction amount */ } else if (argv[fa][1] == 'k') { fa = nfa; - if (na == NULL) usage(0,"Paramater expected following -k"); + if (na == NULL) usage(0,"Parameter expected following -k"); bkcorrect = atof(na); if (bkcorrect < 0.0 || bkcorrect > 1.0) usage(0,"-k parameter must be between 0.0 and 1.0"); /* Neutral blend rate (power) */ } else if (argv[fa][1] == 'A') { fa = nfa; - if (na == NULL) usage(0,"Paramater expected following -A"); + if (na == NULL) usage(0,"Parameter expected following -A"); x.nbrate = atof(na); if (x.nbrate < 0.05 || x.nbrate > 20.0) usage(0,"-A parameter must be between 0.05 and 20.0"); /* Black brightness */ @@ -1999,7 +1999,7 @@ int main(int argc, char *argv[]) { /* COM port */ } else if (argv[fa][1] == 'c') { fa = nfa; - if (na == NULL) usage(0,"Paramater expected following -c"); + if (na == NULL) usage(0,"Parameter expected following -c"); comport = atoi(na); if (comport < 1 || comport > 50) usage(0,"-c parameter %d out of range",comport); @@ -3063,7 +3063,7 @@ int main(int argc, char *argv[]) { /* Black level adjustment */ /* Due to the possibility of the channel offsets not being even, */ /* we use the largest of the XYZ values after they have been */ - /* scaled to be even acording to the white XYZ balance. */ + /* scaled to be even according to the white XYZ balance. */ /* It's safer to set the black level a bit low, and then the */ /* calibration curves can bump the low ones up. */ if (c == '1') { Index: trunk/spectro/spotread.c =================================================================== --- trunk.orig/spectro/spotread.c +++ trunk/spectro/spotread.c @@ -483,7 +483,7 @@ int main(int argc, char *argv[]) { /* COM port */ } else if (argv[fa][1] == 'c') { fa = nfa; - if (na == NULL) usage("Paramater expected following -c"); + if (na == NULL) usage("Parameter expected following -c"); { comport = atoi(na); if (comport < 1 || comport > 40) usage("-c parameter %d out of range",comport); @@ -492,7 +492,7 @@ int main(int argc, char *argv[]) { /* Display type */ } else if (argv[fa][1] == 'y') { fa = nfa; - if (na == NULL) usage("Paramater expected following -y"); + if (na == NULL) usage("Parameter expected following -y"); dtype = na[0]; #ifndef SALONEINSTLIB @@ -500,7 +500,7 @@ int main(int argc, char *argv[]) { } else if (argv[fa][1] == 'I') { fa = nfa; - if (na == NULL) usage("Paramater expected following -I"); + if (na == NULL) usage("Parameter expected following -I"); if (strcmp(na, "A") == 0 || strcmp(na, "M0") == 0) { tillum_set = spec = 1; @@ -539,7 +539,7 @@ int main(int argc, char *argv[]) { /* Spectral Illuminant type for XYZ computation */ } else if (argv[fa][1] == 'i') { fa = nfa; - if (na == NULL) usage("Paramater expected following -i"); + if (na == NULL) usage("Parameter expected following -i"); if (strcmp(na, "A") == 0) { illum_set = spec = 1; illum = icxIT_A; @@ -579,7 +579,7 @@ int main(int argc, char *argv[]) { /* Spectral Observer type */ } else if (argv[fa][1] == 'Q') { fa = nfa; - if (na == NULL) usage("Paramater expected following -Q"); + if (na == NULL) usage("Parameter expected following -Q"); if (strcmp(na, "1931_2") == 0) { /* Classic 2 degree */ obType = icxOT_CIE_1931_2; } else if (strcmp(na, "1964_10") == 0) { /* Classic 10 degree */ @@ -657,7 +657,7 @@ int main(int argc, char *argv[]) { /* Filter configuration */ } else if (argv[fa][1] == 'F') { fa = nfa; - if (na == NULL) usage("Paramater expected following -F"); + if (na == NULL) usage("Parameter expected following -F"); if (na[0] == 'n' || na[0] == 'N') fe = inst_opt_filter_none; else if (na[0] == 'p' || na[0] == 'P') @@ -672,7 +672,7 @@ int main(int argc, char *argv[]) { /* Extra filter compensation file */ } else if (argv[fa][1] == 'E') { fa = nfa; - if (na == NULL) usage("Paramater expected following -E"); + if (na == NULL) usage("Parameter expected following -E"); strncpy(filtername,na,MAXNAMEL-1); filtername[MAXNAMEL-1] = '\000'; /* Show Yxy */ Index: trunk/spectro/colorhug.c =================================================================== --- trunk.orig/spectro/colorhug.c +++ trunk/spectro/colorhug.c @@ -212,7 +212,7 @@ colorhug_command(colorhug *p, a1logd(p->log,8,"colorhug_command: Read %d bytes and %d read\n",xrbytes,rbytes); if (rbytes >= 2) { - a1logd(p->log,6,"colorhug_command: recieved cmd '%s' error '%s' args '%s'\n", + a1logd(p->log,6,"colorhug_command: received cmd '%s' error '%s' args '%s'\n", inst_desc(buf[1]), colorhug_interp_error((inst *) p, buf[0]), icoms_tohex(buf, rbytes - 2)); Index: trunk/spectro/dispwin.c =================================================================== --- trunk.orig/spectro/dispwin.c +++ trunk/spectro/dispwin.c @@ -2734,7 +2734,7 @@ int dispwin_install_profile(dispwin *p, /* Un-Install a display profile */ /* Return nz if failed, */ -/* 1 if not sucessfully deleted */ +/* 1 if not successfully deleted */ /* 2 if profile not found */ int dispwin_uninstall_profile(dispwin *p, char *fname, p_scope scope) { debugr2((errout,"dispwin_uninstall_profile '%s'\n", fname)); @@ -5131,7 +5131,7 @@ int ddebug /* >0 to print debug sta p->native = native &= ~2; } - debugr("new_dispwin: return sucessfully\n"); + debugr("new_dispwin: return successfully\n"); return p; } Index: trunk/spectro/dtp51.c =================================================================== --- trunk.orig/spectro/dtp51.c +++ trunk/spectro/dtp51.c @@ -679,7 +679,7 @@ dtp51_interp_error(inst *pp, int ec) { case DTP51_INVALID_STEP: return "Invalid step"; case DTP51_NO_DATA_AVAILABLE: - return "No data availble"; + return "No data avaialble"; case DTP51_LAMP_MARGINAL: return "Lamp marginal"; case DTP51_LAMP_FAILURE: Index: trunk/spectro/dtp92.c =================================================================== --- trunk.orig/spectro/dtp92.c +++ trunk/spectro/dtp92.c @@ -928,7 +928,7 @@ dtp92_interp_error(inst *pp, int ec) { case DTP92_NO_DATA_AVAILABLE: return "No data available"; case DTP92_MISSING_PARAMETER: - return "Paramter is missing"; + return "Parameter is missing"; case DTP92_CALIBRATION_DENIED: return "Invalid calibration enable code"; case DTP92_NEEDS_OFFSET_CAL: Index: trunk/spectro/hidio.c =================================================================== --- trunk.orig/spectro/hidio.c +++ trunk/spectro/hidio.c @@ -739,7 +739,7 @@ icoms_hid_read(icoms *p, { unsigned char *rbuf2; - /* Create a copy of the data recieved with one more byte */ + /* Create a copy of the data received with one more byte */ if ((rbuf2 = malloc(bsize + 1)) == NULL) { a1loge(p->log, ICOM_SYS, "icoms_hid_read: malloc failed\n"); return ICOM_SYS; Index: trunk/spectro/huey.c =================================================================== --- trunk.orig/spectro/huey.c +++ trunk/spectro/huey.c @@ -81,7 +81,7 @@ static int icoms2huey_err(int se, int to /* i1Display command codes */ /* B = byte (8bit), S = short (16bit), W = word (32bit), A = string */ /* U = unused byte, - = no arguments/results */ -/* The is a 7 byte command buffer and 6 response recieve buffer. */ +/* The is a 7 byte command buffer and 6 response receive buffer. */ /* :2 means the read is from a second 8 byte ep x81 read. */ /* cbuf[-] is command byte */ /* rbuf[-2] is continuation byte */ Index: trunk/spectro/i1pro_imp.c =================================================================== --- trunk.orig/spectro/i1pro_imp.c +++ trunk/spectro/i1pro_imp.c @@ -3813,7 +3813,7 @@ i1pro_code i1pro_restore_refspot_cal(i1p return I1PRO_OK; } - /* We've sucessfully restored the dark calibration */ + /* We've successfully restored the dark calibration */ s->dark_valid = 1; s->ddate = m->caldate; @@ -3858,7 +3858,7 @@ i1pro_code i1pro_restore_refspot_cal(i1p return I1PRO_OK; } - /* We've sucessfully restored the calibration */ + /* We've successfully restored the calibration */ s->cal_valid = 1; s->cfdate = m->caldate; Index: trunk/spectro/madvrwin.c =================================================================== --- trunk.orig/spectro/madvrwin.c +++ trunk/spectro/madvrwin.c @@ -593,7 +593,7 @@ int ii = 0; } #endif - debugr("new_madvrwin: return sucessfully\n"); + debugr("new_madvrwin: return successfully\n"); return p; } Index: trunk/spectro/ss.c =================================================================== --- trunk.orig/spectro/ss.c +++ trunk/spectro/ss.c @@ -1787,7 +1787,7 @@ ss_interp_error(inst *pp, int ec) { case ss_et_BadHexEncoding: return "Message received from instrument has bad Hex encoding"; case ss_et_RecBufferOverun: - return "Message received from instrument would overflow recieve buffer"; + return "Message received from instrument would overflow receive buffer"; default: return "Unknown error code"; } Index: trunk/spectro/ss_imp.c =================================================================== --- trunk.orig/spectro/ss_imp.c +++ trunk/spectro/ss_imp.c @@ -216,7 +216,7 @@ static int h2b(ss *p, char c) { return 0; } -/* Return the first enum from the recieve buffer without removing it. */ +/* Return the first enum from the receive buffer without removing it. */ int ss_peek_ans(ss *p) { int rv; Index: trunk/spectro/webwin.c =================================================================== --- trunk.orig/spectro/webwin.c +++ trunk/spectro/webwin.c @@ -396,7 +396,7 @@ int ddebug /* >0 to print debug sta msec_sleep(50); } - debugr("new_webwin: return sucessfully\n"); + debugr("new_webwin: return successfully\n"); return p; } Index: trunk/xicc/cv.c =================================================================== --- trunk.orig/xicc/cv.c +++ trunk/xicc/cv.c @@ -101,7 +101,7 @@ main(int argc, char *argv[]) { printf("There are %d parameters:\n",np); fflush(stdout); for (i = 0; i < np; i++) { - printf("Paramter %d = %f\n",i, params[i]); fflush(stdout); + printf("Parameter %d = %f\n",i, params[i]); fflush(stdout); } /* Display the result */ Index: trunk/spectro/ss_imp.h =================================================================== --- trunk.orig/spectro/ss_imp.h +++ trunk/spectro/ss_imp.h @@ -720,7 +720,7 @@ void ss_add_string(struct _ss *p, char * /* - - - - - - - - - - - - - - - - - - - - - */ /* ANSWER: */ -/* Return the first enum from the recieve buffer without removing it. */ +/* Return the first enum from the receive buffer without removing it. */ int ss_peek_ans(struct _ss *p); /* Remove a Spectrolino answer enum from the revieve buffer, */ Index: trunk/imdi/cctiff.c =================================================================== --- trunk.orig/imdi/cctiff.c +++ trunk/imdi/cctiff.c @@ -36,7 +36,7 @@ Add flag to ignore inkname mismatches. - Should add support for transfering any extra alpha + Should add support for transferring any extra alpha planes from input to output, rather than simply ignoring them. @@ -1953,11 +1953,11 @@ main(int argc, char *argv[]) { if (wh != NULL) { printf("Output TIFF file '%s'\n",out_name); - printf("Ouput raster file ICC colorspace is %s\n",icm2str(icmColorSpaceSignature,su.outs)); + printf("Output raster file ICC colorspace is %s\n",icm2str(icmColorSpaceSignature,su.outs)); printf("Output TIFF file photometric is %s\n",Photometric2str(wphotometric)); } else { printf("Output JPEG file '%s'\n",out_name); - printf("Ouput raster file ICC colorspace is %s\n",icm2str(icmColorSpaceSignature,su.outs)); + printf("Output raster file ICC colorspace is %s\n",icm2str(icmColorSpaceSignature,su.outs)); printf("Output JPEG file colorspace is %s\n",JPEG_cspace2str(wj.jpeg_color_space)); if (wdesc != NULL) printf("Output raster file description: '%s'\n",wdesc); Index: trunk/imdi/imdi.h =================================================================== --- trunk.orig/imdi/imdi.h +++ trunk/imdi/imdi.h @@ -38,7 +38,7 @@ struct _imdi { /* Note that once an imdi is created, multiple can call interp() without */ /* interfering with each other, allowing parallel execution. */ - void (*interp)(struct _imdi *s, void **outp, int outst, /* Ouput pointers and stride */ + void (*interp)(struct _imdi *s, void **outp, int outst, /* Output pointers and stride */ void **inp, int inst, /* Input pointers and stride */ unsigned int npixels); /* Number of pixels */ Index: trunk/spectro/munki_imp.c =================================================================== --- trunk.orig/spectro/munki_imp.c +++ trunk/spectro/munki_imp.c @@ -6393,7 +6393,7 @@ munki_code munki_create_hr(munki *p, int int i, j, jj, k, cx, sx; munki_fc coeff[40][16]; /* Existing filter cooefficients */ int nwav1; /* Number of filters */ - double wl_short1, wl_long1; /* Ouput wavelength of first and last filters */ + double wl_short1, wl_long1; /* Output wavelength of first and last filters */ double wl_step1; munki_xp xp[41]; /* Crossover points each side of filter */ munki_code ev = MUNKI_OK; Index: trunk/target/printtarg.c =================================================================== --- trunk.orig/target/printtarg.c +++ trunk/target/printtarg.c @@ -2209,7 +2209,7 @@ int *p_npat /* Return number of patche } else { - error("Unsupported intrument type"); + error("Unsupported instrument type"); } /* Compute page limits */ @@ -2953,7 +2953,7 @@ char *argv[]; double sscale = 1.0; /* Spacer size scale */ int rand = 1; int qbits = 0; /* Quantization bits */ - int oft = 0; /* Ouput File type, 0 = PS, 1 = EPS , 2 = TIFF */ + int oft = 0; /* Output File type, 0 = PS, 1 = EPS , 2 = TIFF */ int nocups = 0; /* Supress CUPS PS/EPS job ticket */ depth2d tiffdpth = bpc8_2d; /* TIFF pixel depth */ double tiffres = 100.0; /* TIFF resolution in DPI */ Index: trunk/gamut/nearsmth.c =================================================================== --- trunk.orig/gamut/nearsmth.c +++ trunk/gamut/nearsmth.c @@ -263,7 +263,7 @@ double dxratio /* Depth expansion ratio double va, vr, vd, vv = 0.0; /* Absolute, Delta E^2 between test point and destination closest */ - /* aodv is already positioned acording to the LCh weights, */ + /* aodv is already positioned according to the LCh weights, */ /* so weight as per average of these */ a_o = w->a.o; va = wdesq(dtp, aodv, a_o, a_o, a_o, SUM_POW); @@ -4067,7 +4067,7 @@ static void create_influence_plot(nearsm swdiag = new_rspl(RSPL_NOFLAGS, 3, 3); /* Allocate 3D -> 3D */ swdiag->fit_rspl(swdiag, RSPL_NOFLAGS, fpnts, nmpts, NULL, NULL, gres, NULL, NULL, 1.0, avgdev, NULL); - /* Now create a plot of the sci_gam with the vertexes colored acording to the */ + /* Now create a plot of the sci_gam with the vertexes colored according to the */ /* diagnostic map. */ if ((wrl = new_vrml("sci_gam_wt", 1, vrml_lab)) == NULL) { fprintf(stderr,"gamut map: new_vrml failed for '%s%s'\n","sci_gam_wt",vrm_ext()); Index: trunk/gamut/nearsmth.h =================================================================== --- trunk.orig/gamut/nearsmth.h +++ trunk/gamut/nearsmth.h @@ -294,7 +294,7 @@ gammapweights *src2, double wgt2, gammapweights *src3, double wgt3 ); -/* Tweak weights acording to extra cmy cusp flags or rel override */ +/* Tweak weights according to extra cmy cusp flags or rel override */ void tweak_weights(gammapweights out[14], int dst_cmymap, int rel_oride); #endif /* NEARSMTH_H */ Index: trunk/imdi/cctiffo.c =================================================================== --- trunk.orig/imdi/cctiffo.c +++ trunk/imdi/cctiffo.c @@ -307,7 +307,7 @@ int pmtc case PHOTOMETRIC_LOGLUV: return "CIELog2Luv"; } - sprintf(buf,"Unknonw Tag %d",pmtc); + sprintf(buf,"Unknown Tag %d",pmtc); return buf; } Index: trunk/imdi/greytiff.c =================================================================== --- trunk.orig/imdi/greytiff.c +++ trunk/imdi/greytiff.c @@ -132,7 +132,7 @@ int pmtc case PHOTOMETRIC_LOGLUV: return "CIELog2Luv"; } - sprintf(buf,"Unknonw Tag %d",pmtc); + sprintf(buf,"Unknown Tag %d",pmtc); return buf; } Index: trunk/link/collink.c =================================================================== --- trunk.orig/link/collink.c +++ trunk/link/collink.c @@ -1111,7 +1111,7 @@ void devip_devop(void *cntx, double *out } /* We've got the input profile PCS' at this point. */ - /* If we're transfering the K value from the input profile to the */ + /* If we're transferring the K value from the input profile to the */ /* output, copy it into locus[], which will be given to the inverse */ /* lookup function, else the inverse lookup will generate a K using */ /* the curve parameters. */ @@ -1243,7 +1243,7 @@ void devip_devop(void *cntx, double *out if (p->nhack == 2) { /* Ideally we would create a 4D PCSK -> PCSK gamut mapping */ /* to smoothly and accurately cope with the changing source */ - /* and destination gamuts acording to their degree of "K onlyness". */ + /* and destination gamuts according to their degree of "K onlyness". */ /* In practice we're going to simply interpolated between */ /* two extremes: unrestricted gamut and K only black gamut. */ double map0[3], map1[3]; Index: trunk/profile/printcal.c =================================================================== --- trunk.orig/profile/printcal.c +++ trunk/profile/printcal.c @@ -1294,7 +1294,7 @@ int main(int argc, char *argv[]) { icmXYZ2Lab(&wht, wp->Lab, wp->XYZ); } - /* Sort the channel acording to device value */ + /* Sort the channel according to device value */ /* For a consistent result for identical device values, */ /* secondary sort by inverse CIE value */ //#define HEAP_COMPARE(A,B) ((A).dev < (B).dev) Index: trunk/spectro/dispsup.c =================================================================== --- trunk.orig/spectro/dispsup.c +++ trunk/spectro/dispsup.c @@ -707,7 +707,7 @@ static int disprd_read_imp( scb->serno = p->serno++; scb->msec = msec_time(); - a1logd(p->log,1, "got reading %f %f %f, transfering to col\n", + a1logd(p->log,1, "got reading %f %f %f, transferring to col\n", val.XYZ[0], val.XYZ[1], val.XYZ[2]); scb->mtype = val.mtype; Index: trunk/gamut/gammap.c =================================================================== --- trunk.orig/gamut/gammap.c +++ trunk/gamut/gammap.c @@ -853,7 +853,7 @@ gammap *new_gammap( #endif if (gmi->bph == gmm_clipBP) { - /* Extend the target black point to accomodate the */ + /* Extend the target black point to accommodate the */ /* bent or clipped destination space L* range */ if (fabp[0] < dr_cs_bp[0]) { t = (fabp[0] - dr_cs_wp[0])/(dr_cs_bp[0] - dr_cs_wp[0]); Index: trunk/profile/profout.c =================================================================== --- trunk.orig/profile/profout.c +++ trunk/profile/profout.c @@ -1048,7 +1048,7 @@ make_output_icc( if (iccver < icmVersion2_4) { iccver = icmVersion2_4; /* Need 2.4.0 for Display intents */ if (verb) - fprintf(verbo,"Bumped ICC version to 2.4.0 to accomodate multiple Display intents\n"); + fprintf(verbo,"Bumped ICC version to 2.4.0 to accommodate multiple Display intents\n"); } } if (wr_icco->set_version(wr_icco, iccver) != 0) Index: trunk/render/thscreen.c =================================================================== --- trunk.orig/render/thscreen.c +++ trunk/render/thscreen.c @@ -636,7 +636,7 @@ thscreen *new_thscreen( mrang = 65535.0/(t->oelev - 1.0); DBG(("new_thscreen() raw modulation rande = %f\n",mrang)); - /* Modify the modulation range to accomodate any level overlap */ + /* Modify the modulation range to accommodate any level overlap */ if (olap > 0.0 && t->oelev > 2) { mrang = ((t->oelev - 2.0) * olap * mrang + 65535.0)/(t->oelev - 1.0); DBG(("new_thscreen() modulation adjusted for overlap = %f\n",mrang)); Index: trunk/xicc/xspect.c =================================================================== --- trunk.orig/xicc/xspect.c +++ trunk/xicc/xspect.c @@ -4440,7 +4440,7 @@ void xspect_plot10(xspect *sp, int n) { /* Given an emission spectrum, set the UV output to the given level. */ /* The shape of the UV is taken from FWA1_stim, and the level is */ /* with respect to the Y of the input spectrum. */ -/* The output range is extended to accomodate the UV wavelengths */ +/* The output range is extended to accommodate the UV wavelengths */ void xsp_setUV(xspect *out, xspect *in, double uvlevel) { int i, xs, xe; double ww, avg; Index: trunk/spectro/ccxxmake.c =================================================================== --- trunk.orig/spectro/ccxxmake.c +++ trunk/spectro/ccxxmake.c @@ -398,7 +398,7 @@ int main(int argc, char *argv[]) { /* COM port */ } else if (argv[fa][1] == 'c') { fa = nfa; - if (na == NULL) usage(0,"Paramater expected following -c"); + if (na == NULL) usage(0,"Parameter expected following -c"); comno = atoi(na); if (comno < 1 || comno > 40) usage(0,"-c parameter %d out of range",comno); @@ -498,7 +498,7 @@ int main(int argc, char *argv[]) { /* Serial port flow control */ } else if (argv[fa][1] == 'W') { fa = nfa; - if (na == NULL) usage(0,"Paramater expected following -W"); + if (na == NULL) usage(0,"Parameter expected following -W"); if (na[0] == 'n' || na[0] == 'N') fc = fc_none; else if (na[0] == 'h' || na[0] == 'H') @@ -587,7 +587,7 @@ int main(int argc, char *argv[]) { strcat(outname, doccss ? ".ccss" : ".ccmx"); if (fakeseq && doccss) - error("Fake CCSS test not implemeted"); + error("Fake CCSS test not implemented"); printf("\n"); Index: trunk/spectro/dispread.c =================================================================== --- trunk.orig/spectro/dispread.c +++ trunk/spectro/dispread.c @@ -413,7 +413,7 @@ int main(int argc, char *argv[]) { /* COM port */ } else if (argv[fa][1] == 'c') { fa = nfa; - if (na == NULL) usage(0,"Paramater expected following -c"); + if (na == NULL) usage(0,"Parameter expected following -c"); comport = atoi(na); if (comport < 1 || comport > 50) usage(0,"-c parameter %d out of range",comport); Index: trunk/spectro/fakeread.c =================================================================== --- trunk.orig/spectro/fakeread.c +++ trunk/spectro/fakeread.c @@ -814,7 +814,7 @@ int main(int argc, char *argv[]) /* We're assuming that the input space has a perfect black point... */ - /* Lookup the ouput black point in XYZ PCS. We're assuming monotonicity.. */ + /* Lookup the output black point in XYZ PCS. We're assuming monotonicity.. */ bp[0] = bp[1] = bp[2] = 0.0; oluo->lookup(oluo, bp, bp); @@ -827,7 +827,7 @@ int main(int argc, char *argv[]) bt1886 == 1 ? egamma : tgamma, bt1886 == 1 ? 1 : 0); if (verb) - printf("Gamma Curve: Using ouput black offset proportion %f\n",outoprop); + printf("Gamma Curve: Using output black offset proportion %f\n",outoprop); if (bt1886 == 1) { /* Using effective gamma */ if (verb) Index: trunk/profile/invprofcheck.c =================================================================== --- trunk.orig/profile/invprofcheck.c +++ trunk/profile/invprofcheck.c @@ -99,7 +99,7 @@ void usage(void) { fprintf(stderr," -k Show CIEDE2000 delta E values\n"); fprintf(stderr," -w create %s visualisation (profile%s)\n",vrml_format(),vrml_ext()); fprintf(stderr," -x Use %s axes\n",vrml_format()); - fprintf(stderr," -e Color vectors acording to delta E\n"); + fprintf(stderr," -e Color vectors according to delta E\n"); fprintf(stderr," profile.icm Profile to check\n"); exit(1); } Index: trunk/profile/profcheck.c =================================================================== --- trunk.orig/profile/profcheck.c +++ trunk/profile/profcheck.c @@ -59,7 +59,7 @@ usage(void) { fprintf(stderr," -w create %s visualisation (iccprofile%s)\n",vrml_format(),vrml_ext()); fprintf(stderr," -x Use %s axes\n",vrml_format()); fprintf(stderr," -m Make %s lines a minimum of 0.5\n",vrml_format()); - fprintf(stderr," -e Color vectors acording to delta E\n"); + fprintf(stderr," -e Color vectors according to delta E\n"); fprintf(stderr," -h Plot a histogram of delta E's\n"); fprintf(stderr," -s Sort output by delta E\n"); fprintf(stderr," -P N.NN Create a pruned .ti3 with points less or equal to N.NN delta E\n"); Index: trunk/spectro/ccwin.c =================================================================== --- trunk.orig/spectro/ccwin.c +++ trunk/spectro/ccwin.c @@ -827,7 +827,7 @@ int ddebug /* >0 to print debug sta return NULL; } - debugr2((errout,"new_ccwin: return sucessfully\n")); + debugr2((errout,"new_ccwin: return successfully\n")); return p; } Index: trunk/profile/colverify.c =================================================================== --- trunk.orig/profile/colverify.c +++ trunk/profile/colverify.c @@ -68,7 +68,7 @@ usage(void) { fprintf(stderr," -D Use D50 100.0 as L*a*b* white reference\n"); fprintf(stderr," -c Show CIE94 delta E values\n"); fprintf(stderr," -k Show CIEDE2000 delta E values\n"); - fprintf(stderr," -h [hist.txt] Plot a histogram of delta E's [Optionaly save points to .txt]\n"); + fprintf(stderr," -h [hist.txt] Plot a histogram of delta E's [Optionally save points to .txt]\n"); fprintf(stderr," -s Sort patch values by error\n"); fprintf(stderr," -w create PCS %s vector visualisation (measured%s)\n",vrml_format(),vrml_ext()); fprintf(stderr," -W create PCS %s marker visualisation (measured%s)\n",vrml_format(),vrml_ext());