/* $Id: tif_read.c,v 1.44 2014-12-23 10:15:35 erouault Exp $ */ /* * Copyright (c) 1988-1997 Sam Leffler * Copyright (c) 1991-1997 Silicon Graphics, Inc. * * Permission to use, copy, modify, distribute, and sell this software and * its documentation for any purpose is hereby granted without fee, provided * that (i) the above copyright notices and this permission notice appear in * all copies of the software and related documentation, and (ii) the names of * Sam Leffler and Silicon Graphics may not be used in any advertising or * publicity relating to the software without the specific, prior written * permission of Sam Leffler and Silicon Graphics. * * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. * * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE * OF THIS SOFTWARE. */ /* * TIFF Library. * Scanline-oriented Read Support */ #include "tiffiop.h" #include int TIFFFillStrip(TIFF* tif, uint32 strip); int TIFFFillTile(TIFF* tif, uint32 tile); static int TIFFStartStrip(TIFF* tif, uint32 strip); static int TIFFStartTile(TIFF* tif, uint32 tile); static int TIFFCheckRead(TIFF*, int); static tmsize_t TIFFReadRawStrip1(TIFF* tif, uint32 strip, void* buf, tmsize_t size,const char* module); #define NOSTRIP ((uint32)(-1)) /* undefined state */ #define NOTILE ((uint32)(-1)) /* undefined state */ static int TIFFFillStripPartial( TIFF *tif, int strip, tmsize_t read_ahead, int restart ) { static const char module[] = "TIFFFillStripPartial"; register TIFFDirectory *td = &tif->tif_dir; tmsize_t unused_data; uint64 read_offset; tmsize_t cc, to_read; /* tmsize_t bytecountm; */ if (!_TIFFFillStriles( tif ) || !tif->tif_dir.td_stripbytecount) return 0; /* * Expand raw data buffer, if needed, to hold data * strip coming from file (perhaps should set upper * bound on the size of a buffer we'll use?). */ /* bytecountm=(tmsize_t) td->td_stripbytecount[strip]; */ if (read_ahead*2 > tif->tif_rawdatasize) { assert( restart ); tif->tif_curstrip = NOSTRIP; if ((tif->tif_flags & TIFF_MYBUFFER) == 0) { TIFFErrorExt(tif->tif_clientdata, module, "Data buffer too small to hold part of strip %lu", (unsigned long) strip); return (0); } if (!TIFFReadBufferSetup(tif, 0, read_ahead*2)) return (0); } if( restart ) { tif->tif_rawdataloaded = 0; tif->tif_rawdataoff = 0; } /* ** If we are reading more data, move any unused data to the ** start of the buffer. */ if( tif->tif_rawdataloaded > 0 ) unused_data = tif->tif_rawdataloaded - (tif->tif_rawcp - tif->tif_rawdata); else unused_data = 0; if( unused_data > 0 ) { assert((tif->tif_flags&TIFF_BUFFERMMAP)==0); memmove( tif->tif_rawdata, tif->tif_rawcp, unused_data ); } /* ** Seek to the point in the file where more data should be read. */ read_offset = td->td_stripoffset[strip] + tif->tif_rawdataoff + tif->tif_rawdataloaded; if (!SeekOK(tif, read_offset)) { TIFFErrorExt(tif->tif_clientdata, module, "Seek error at scanline %lu, strip %lu", (unsigned long) tif->tif_row, (unsigned long) strip); return 0; } /* ** How much do we want to read? */ to_read = tif->tif_rawdatasize - unused_data; if( (uint64) to_read > td->td_stripbytecount[strip] - tif->tif_rawdataoff - tif->tif_rawdataloaded ) { to_read = (tmsize_t) td->td_stripbytecount[strip] - tif->tif_rawdataoff - tif->tif_rawdataloaded; } assert((tif->tif_flags&TIFF_BUFFERMMAP)==0); cc = TIFFReadFile(tif, tif->tif_rawdata + unused_data, to_read); if (cc != to_read) { #if defined(__WIN32__) && (defined(_MSC_VER) || defined(__MINGW32__)) TIFFErrorExt(tif->tif_clientdata, module, "Read error at scanline %lu; got %I64u bytes, expected %I64u", (unsigned long) tif->tif_row, (unsigned __int64) cc, (unsigned __int64) to_read); #else TIFFErrorExt(tif->tif_clientdata, module, "Read error at scanline %lu; got %llu bytes, expected %llu", (unsigned long) tif->tif_row, (unsigned long long) cc, (unsigned long long) to_read); #endif return 0; } tif->tif_rawdataoff = tif->tif_rawdataoff + tif->tif_rawdataloaded - unused_data ; tif->tif_rawdataloaded = unused_data + to_read; tif->tif_rawcp = tif->tif_rawdata; if (!isFillOrder(tif, td->td_fillorder) && (tif->tif_flags & TIFF_NOBITREV) == 0) { assert((tif->tif_flags&TIFF_BUFFERMMAP)==0); TIFFReverseBits(tif->tif_rawdata + unused_data, to_read ); } /* ** When starting a strip from the beginning we need to ** restart the decoder. */ if( restart ) return TIFFStartStrip(tif, strip); else return 1; } /* * Seek to a random row+sample in a file. * * Only used by TIFFReadScanline, and is only used on * strip organized files. We do some tricky stuff to try * and avoid reading the whole compressed raw data for big * strips. */ static int TIFFSeek(TIFF* tif, uint32 row, uint16 sample ) { register TIFFDirectory *td = &tif->tif_dir; uint32 strip; int whole_strip; tmsize_t read_ahead = 0; /* ** Establish what strip we are working from. */ if (row >= td->td_imagelength) { /* out of range */ TIFFErrorExt(tif->tif_clientdata, tif->tif_name, "%lu: Row out of range, max %lu", (unsigned long) row, (unsigned long) td->td_imagelength); return (0); } if (td->td_planarconfig == PLANARCONFIG_SEPARATE) { if (sample >= td->td_samplesperpixel) { TIFFErrorExt(tif->tif_clientdata, tif->tif_name, "%lu: Sample out of range, max %lu", (unsigned long) sample, (unsigned long) td->td_samplesperpixel); return (0); } strip = (uint32)sample*td->td_stripsperimage + row/td->td_rowsperstrip; } else strip = row / td->td_rowsperstrip; /* * Do we want to treat this strip as one whole chunk or * read it a few lines at a time? */ #if defined(CHUNKY_STRIP_READ_SUPPORT) if (!_TIFFFillStriles( tif ) || !tif->tif_dir.td_stripbytecount) return 0; whole_strip = tif->tif_dir.td_stripbytecount[strip] < 10 || isMapped(tif); #else whole_strip = 1; #endif if( !whole_strip ) { read_ahead = tif->tif_scanlinesize * 16 + 5000; } /* * If we haven't loaded this strip, do so now, possibly * only reading the first part. */ if (strip != tif->tif_curstrip) { /* different strip, refill */ if( whole_strip ) { if (!TIFFFillStrip(tif, strip)) return (0); } else { if( !TIFFFillStripPartial(tif,strip,read_ahead,1) ) return 0; } } /* ** If we already have some data loaded, do we need to read some more? */ else if( !whole_strip ) { if( ((tif->tif_rawdata + tif->tif_rawdataloaded) - tif->tif_rawcp) < read_ahead && (uint64) tif->tif_rawdataoff+tif->tif_rawdataloaded < td->td_stripbytecount[strip] ) { if( !TIFFFillStripPartial(tif,strip,read_ahead,0) ) return 0; } } if (row < tif->tif_row) { /* * Moving backwards within the same strip: backup * to the start and then decode forward (below). * * NB: If you're planning on lots of random access within a * strip, it's better to just read and decode the entire * strip, and then access the decoded data in a random fashion. */ if( tif->tif_rawdataoff != 0 ) { if( !TIFFFillStripPartial(tif,strip,read_ahead,1) ) return 0; } else { if (!TIFFStartStrip(tif, strip)) return (0); } } if (row != tif->tif_row) { /* * Seek forward to the desired row. */ /* TODO: Will this really work with partial buffers? */ if (!(*tif->tif_seek)(tif, row - tif->tif_row)) return (0); tif->tif_row = row; } return (1); } int TIFFReadScanline(TIFF* tif, void* buf, uint32 row, uint16 sample) { int e; if (!TIFFCheckRead(tif, 0)) return (-1); if( (e = TIFFSeek(tif, row, sample)) != 0) { /* * Decompress desired row into user buffer. */ e = (*tif->tif_decoderow) (tif, (uint8*) buf, tif->tif_scanlinesize, sample); /* we are now poised at the beginning of the next row */ tif->tif_row = row + 1; if (e) (*tif->tif_postdecode)(tif, (uint8*) buf, tif->tif_scanlinesize); } return (e > 0 ? 1 : -1); } /* * Read a strip of data and decompress the specified * amount into the user-supplied buffer. */ tmsize_t TIFFReadEncodedStrip(TIFF* tif, uint32 strip, void* buf, tmsize_t size) { static const char module[] = "TIFFReadEncodedStrip"; TIFFDirectory *td = &tif->tif_dir; uint32 rowsperstrip; uint32 stripsperplane; uint32 stripinplane; uint16 plane; uint32 rows; tmsize_t stripsize; if (!TIFFCheckRead(tif,0)) return((tmsize_t)(-1)); if (strip>=td->td_nstrips) { TIFFErrorExt(tif->tif_clientdata,module, "%lu: Strip out of range, max %lu",(unsigned long)strip, (unsigned long)td->td_nstrips); return((tmsize_t)(-1)); } /* * Calculate the strip size according to the number of * rows in the strip (check for truncated last strip on any * of the separations). */ rowsperstrip=td->td_rowsperstrip; if (rowsperstrip>td->td_imagelength) rowsperstrip=td->td_imagelength; stripsperplane=((td->td_imagelength+rowsperstrip-1)/rowsperstrip); stripinplane=(strip%stripsperplane); plane=(strip/stripsperplane); rows=td->td_imagelength-stripinplane*rowsperstrip; if (rows>rowsperstrip) rows=rowsperstrip; stripsize=TIFFVStripSize(tif,rows); if (stripsize==0) return((tmsize_t)(-1)); if ((size!=(tmsize_t)(-1))&&(sizetif_decodestrip)(tif,buf,stripsize,plane)<=0) return((tmsize_t)(-1)); (*tif->tif_postdecode)(tif,buf,stripsize); return(stripsize); } static tmsize_t TIFFReadRawStrip1(TIFF* tif, uint32 strip, void* buf, tmsize_t size, const char* module) { TIFFDirectory *td = &tif->tif_dir; if (!_TIFFFillStriles( tif )) return ((tmsize_t)(-1)); assert((tif->tif_flags&TIFF_NOREADRAW)==0); if (!isMapped(tif)) { tmsize_t cc; if (!SeekOK(tif, td->td_stripoffset[strip])) { TIFFErrorExt(tif->tif_clientdata, module, "Seek error at scanline %lu, strip %lu", (unsigned long) tif->tif_row, (unsigned long) strip); return ((tmsize_t)(-1)); } cc = TIFFReadFile(tif, buf, size); if (cc != size) { #if defined(__WIN32__) && (defined(_MSC_VER) || defined(__MINGW32__)) TIFFErrorExt(tif->tif_clientdata, module, "Read error at scanline %lu; got %I64u bytes, expected %I64u", (unsigned long) tif->tif_row, (unsigned __int64) cc, (unsigned __int64) size); #else TIFFErrorExt(tif->tif_clientdata, module, "Read error at scanline %lu; got %llu bytes, expected %llu", (unsigned long) tif->tif_row, (unsigned long long) cc, (unsigned long long) size); #endif return ((tmsize_t)(-1)); } } else { tmsize_t ma,mb; tmsize_t n; ma=(tmsize_t)td->td_stripoffset[strip]; mb=ma+size; if (((uint64)ma!=td->td_stripoffset[strip])||(ma>tif->tif_size)) n=0; else if ((mbtif->tif_size)) n=tif->tif_size-ma; else n=size; if (n!=size) { #if defined(__WIN32__) && (defined(_MSC_VER) || defined(__MINGW32__)) TIFFErrorExt(tif->tif_clientdata, module, "Read error at scanline %lu, strip %lu; got %I64u bytes, expected %I64u", (unsigned long) tif->tif_row, (unsigned long) strip, (unsigned __int64) n, (unsigned __int64) size); #else TIFFErrorExt(tif->tif_clientdata, module, "Read error at scanline %lu, strip %lu; got %llu bytes, expected %llu", (unsigned long) tif->tif_row, (unsigned long) strip, (unsigned long long) n, (unsigned long long) size); #endif return ((tmsize_t)(-1)); } _TIFFmemcpy(buf, tif->tif_base + ma, size); } return (size); } /* * Read a strip of data from the file. */ tmsize_t TIFFReadRawStrip(TIFF* tif, uint32 strip, void* buf, tmsize_t size) { static const char module[] = "TIFFReadRawStrip"; TIFFDirectory *td = &tif->tif_dir; uint64 bytecount; tmsize_t bytecountm; if (!TIFFCheckRead(tif, 0)) return ((tmsize_t)(-1)); if (strip >= td->td_nstrips) { TIFFErrorExt(tif->tif_clientdata, module, "%lu: Strip out of range, max %lu", (unsigned long) strip, (unsigned long) td->td_nstrips); return ((tmsize_t)(-1)); } if (tif->tif_flags&TIFF_NOREADRAW) { TIFFErrorExt(tif->tif_clientdata, module, "Compression scheme does not support access to raw uncompressed data"); return ((tmsize_t)(-1)); } bytecount = td->td_stripbytecount[strip]; if ((int64)bytecount <= 0) { #if defined(__WIN32__) && (defined(_MSC_VER) || defined(__MINGW32__)) TIFFErrorExt(tif->tif_clientdata, module, "%I64u: Invalid strip byte count, strip %lu", (unsigned __int64) bytecount, (unsigned long) strip); #else TIFFErrorExt(tif->tif_clientdata, module, "%llu: Invalid strip byte count, strip %lu", (unsigned long long) bytecount, (unsigned long) strip); #endif return ((tmsize_t)(-1)); } bytecountm = (tmsize_t)bytecount; if ((uint64)bytecountm!=bytecount) { TIFFErrorExt(tif->tif_clientdata, module, "Integer overflow"); return ((tmsize_t)(-1)); } if (size != (tmsize_t)(-1) && size < bytecountm) bytecountm = size; return (TIFFReadRawStrip1(tif, strip, buf, bytecountm, module)); } /* * Read the specified strip and setup for decoding. The data buffer is * expanded, as necessary, to hold the strip's data. */ int TIFFFillStrip(TIFF* tif, uint32 strip) { static const char module[] = "TIFFFillStrip"; TIFFDirectory *td = &tif->tif_dir; if (!_TIFFFillStriles( tif ) || !tif->tif_dir.td_stripbytecount) return 0; if ((tif->tif_flags&TIFF_NOREADRAW)==0) { uint64 bytecount = td->td_stripbytecount[strip]; if ((int64)bytecount <= 0) { #if defined(__WIN32__) && (defined(_MSC_VER) || defined(__MINGW32__)) TIFFErrorExt(tif->tif_clientdata, module, "Invalid strip byte count %I64u, strip %lu", (unsigned __int64) bytecount, (unsigned long) strip); #else TIFFErrorExt(tif->tif_clientdata, module, "Invalid strip byte count %llu, strip %lu", (unsigned long long) bytecount, (unsigned long) strip); #endif return (0); } if (isMapped(tif) && (isFillOrder(tif, td->td_fillorder) || (tif->tif_flags & TIFF_NOBITREV))) { /* * The image is mapped into memory and we either don't * need to flip bits or the compression routine is * going to handle this operation itself. In this * case, avoid copying the raw data and instead just * reference the data from the memory mapped file * image. This assumes that the decompression * routines do not modify the contents of the raw data * buffer (if they try to, the application will get a * fault since the file is mapped read-only). */ if ((tif->tif_flags & TIFF_MYBUFFER) && tif->tif_rawdata) { _TIFFfree(tif->tif_rawdata); tif->tif_rawdata = NULL; tif->tif_rawdatasize = 0; } tif->tif_flags &= ~TIFF_MYBUFFER; /* * We must check for overflow, potentially causing * an OOB read. Instead of simple * * td->td_stripoffset[strip]+bytecount > tif->tif_size * * comparison (which can overflow) we do the following * two comparisons: */ if (bytecount > (uint64)tif->tif_size || td->td_stripoffset[strip] > (uint64)tif->tif_size - bytecount) { /* * This error message might seem strange, but * it's what would happen if a read were done * instead. */ #if defined(__WIN32__) && (defined(_MSC_VER) || defined(__MINGW32__)) TIFFErrorExt(tif->tif_clientdata, module, "Read error on strip %lu; " "got %I64u bytes, expected %I64u", (unsigned long) strip, (unsigned __int64) tif->tif_size - td->td_stripoffset[strip], (unsigned __int64) bytecount); #else TIFFErrorExt(tif->tif_clientdata, module, "Read error on strip %lu; " "got %llu bytes, expected %llu", (unsigned long) strip, (unsigned long long) tif->tif_size - td->td_stripoffset[strip], (unsigned long long) bytecount); #endif tif->tif_curstrip = NOSTRIP; return (0); } tif->tif_rawdatasize = (tmsize_t)bytecount; tif->tif_rawdata = tif->tif_base + (tmsize_t)td->td_stripoffset[strip]; tif->tif_rawdataoff = 0; tif->tif_rawdataloaded = (tmsize_t) bytecount; /* * When we have tif_rawdata reference directly into the memory mapped file * we need to be pretty careful about how we use the rawdata. It is not * a general purpose working buffer as it normally otherwise is. So we * keep track of this fact to avoid using it improperly. */ tif->tif_flags |= TIFF_BUFFERMMAP; } else { /* * Expand raw data buffer, if needed, to hold data * strip coming from file (perhaps should set upper * bound on the size of a buffer we'll use?). */ tmsize_t bytecountm; bytecountm=(tmsize_t)bytecount; if ((uint64)bytecountm!=bytecount) { TIFFErrorExt(tif->tif_clientdata,module,"Integer overflow"); return(0); } if (bytecountm > tif->tif_rawdatasize) { tif->tif_curstrip = NOSTRIP; if ((tif->tif_flags & TIFF_MYBUFFER) == 0) { TIFFErrorExt(tif->tif_clientdata, module, "Data buffer too small to hold strip %lu", (unsigned long) strip); return (0); } if (!TIFFReadBufferSetup(tif, 0, bytecountm)) return (0); } if (tif->tif_flags&TIFF_BUFFERMMAP) { tif->tif_curstrip = NOSTRIP; if (!TIFFReadBufferSetup(tif, 0, bytecountm)) return (0); } if (TIFFReadRawStrip1(tif, strip, tif->tif_rawdata, bytecountm, module) != bytecountm) return (0); tif->tif_rawdataoff = 0; tif->tif_rawdataloaded = bytecountm; if (!isFillOrder(tif, td->td_fillorder) && (tif->tif_flags & TIFF_NOBITREV) == 0) TIFFReverseBits(tif->tif_rawdata, bytecountm); } } return (TIFFStartStrip(tif, strip)); } /* * Tile-oriented Read Support * Contributed by Nancy Cam (Silicon Graphics). */ /* * Read and decompress a tile of data. The * tile is selected by the (x,y,z,s) coordinates. */ tmsize_t TIFFReadTile(TIFF* tif, void* buf, uint32 x, uint32 y, uint32 z, uint16 s) { if (!TIFFCheckRead(tif, 1) || !TIFFCheckTile(tif, x, y, z, s)) return ((tmsize_t)(-1)); return (TIFFReadEncodedTile(tif, TIFFComputeTile(tif, x, y, z, s), buf, (tmsize_t)(-1))); } /* * Read a tile of data and decompress the specified * amount into the user-supplied buffer. */ tmsize_t TIFFReadEncodedTile(TIFF* tif, uint32 tile, void* buf, tmsize_t size) { static const char module[] = "TIFFReadEncodedTile"; TIFFDirectory *td = &tif->tif_dir; tmsize_t tilesize = tif->tif_tilesize; if (!TIFFCheckRead(tif, 1)) return ((tmsize_t)(-1)); if (tile >= td->td_nstrips) { TIFFErrorExt(tif->tif_clientdata, module, "%lu: Tile out of range, max %lu", (unsigned long) tile, (unsigned long) td->td_nstrips); return ((tmsize_t)(-1)); } if (size == (tmsize_t)(-1)) size = tilesize; else if (size > tilesize) size = tilesize; if (TIFFFillTile(tif, tile) && (*tif->tif_decodetile)(tif, (uint8*) buf, size, (uint16)(tile/td->td_stripsperimage))) { (*tif->tif_postdecode)(tif, (uint8*) buf, size); return (size); } else return ((tmsize_t)(-1)); } static tmsize_t TIFFReadRawTile1(TIFF* tif, uint32 tile, void* buf, tmsize_t size, const char* module) { TIFFDirectory *td = &tif->tif_dir; if (!_TIFFFillStriles( tif )) return ((tmsize_t)(-1)); assert((tif->tif_flags&TIFF_NOREADRAW)==0); if (!isMapped(tif)) { tmsize_t cc; if (!SeekOK(tif, td->td_stripoffset[tile])) { TIFFErrorExt(tif->tif_clientdata, module, "Seek error at row %lu, col %lu, tile %lu", (unsigned long) tif->tif_row, (unsigned long) tif->tif_col, (unsigned long) tile); return ((tmsize_t)(-1)); } cc = TIFFReadFile(tif, buf, size); if (cc != size) { #if defined(__WIN32__) && (defined(_MSC_VER) || defined(__MINGW32__)) TIFFErrorExt(tif->tif_clientdata, module, "Read error at row %lu, col %lu; got %I64u bytes, expected %I64u", (unsigned long) tif->tif_row, (unsigned long) tif->tif_col, (unsigned __int64) cc, (unsigned __int64) size); #else TIFFErrorExt(tif->tif_clientdata, module, "Read error at row %lu, col %lu; got %llu bytes, expected %llu", (unsigned long) tif->tif_row, (unsigned long) tif->tif_col, (unsigned long long) cc, (unsigned long long) size); #endif return ((tmsize_t)(-1)); } } else { tmsize_t ma,mb; tmsize_t n; ma=(tmsize_t)td->td_stripoffset[tile]; mb=ma+size; if (((uint64)ma!=td->td_stripoffset[tile])||(ma>tif->tif_size)) n=0; else if ((mbtif->tif_size)) n=tif->tif_size-ma; else n=size; if (n!=size) { #if defined(__WIN32__) && (defined(_MSC_VER) || defined(__MINGW32__)) TIFFErrorExt(tif->tif_clientdata, module, "Read error at row %lu, col %lu, tile %lu; got %I64u bytes, expected %I64u", (unsigned long) tif->tif_row, (unsigned long) tif->tif_col, (unsigned long) tile, (unsigned __int64) n, (unsigned __int64) size); #else TIFFErrorExt(tif->tif_clientdata, module, "Read error at row %lu, col %lu, tile %lu; got %llu bytes, expected %llu", (unsigned long) tif->tif_row, (unsigned long) tif->tif_col, (unsigned long) tile, (unsigned long long) n, (unsigned long long) size); #endif return ((tmsize_t)(-1)); } _TIFFmemcpy(buf, tif->tif_base + ma, size); } return (size); } /* * Read a tile of data from the file. */ tmsize_t TIFFReadRawTile(TIFF* tif, uint32 tile, void* buf, tmsize_t size) { static const char module[] = "TIFFReadRawTile"; TIFFDirectory *td = &tif->tif_dir; uint64 bytecount64; tmsize_t bytecountm; if (!TIFFCheckRead(tif, 1)) return ((tmsize_t)(-1)); if (tile >= td->td_nstrips) { TIFFErrorExt(tif->tif_clientdata, module, "%lu: Tile out of range, max %lu", (unsigned long) tile, (unsigned long) td->td_nstrips); return ((tmsize_t)(-1)); } if (tif->tif_flags&TIFF_NOREADRAW) { TIFFErrorExt(tif->tif_clientdata, module, "Compression scheme does not support access to raw uncompressed data"); return ((tmsize_t)(-1)); } bytecount64 = td->td_stripbytecount[tile]; if (size != (tmsize_t)(-1) && (uint64)size < bytecount64) bytecount64 = (uint64)size; bytecountm = (tmsize_t)bytecount64; if ((uint64)bytecountm!=bytecount64) { TIFFErrorExt(tif->tif_clientdata,module,"Integer overflow"); return ((tmsize_t)(-1)); } return (TIFFReadRawTile1(tif, tile, buf, bytecountm, module)); } /* * Read the specified tile and setup for decoding. The data buffer is * expanded, as necessary, to hold the tile's data. */ int TIFFFillTile(TIFF* tif, uint32 tile) { static const char module[] = "TIFFFillTile"; TIFFDirectory *td = &tif->tif_dir; if (!_TIFFFillStriles( tif ) || !tif->tif_dir.td_stripbytecount) return 0; if ((tif->tif_flags&TIFF_NOREADRAW)==0) { uint64 bytecount = td->td_stripbytecount[tile]; if ((int64)bytecount <= 0) { #if defined(__WIN32__) && (defined(_MSC_VER) || defined(__MINGW32__)) TIFFErrorExt(tif->tif_clientdata, module, "%I64u: Invalid tile byte count, tile %lu", (unsigned __int64) bytecount, (unsigned long) tile); #else TIFFErrorExt(tif->tif_clientdata, module, "%llu: Invalid tile byte count, tile %lu", (unsigned long long) bytecount, (unsigned long) tile); #endif return (0); } if (isMapped(tif) && (isFillOrder(tif, td->td_fillorder) || (tif->tif_flags & TIFF_NOBITREV))) { /* * The image is mapped into memory and we either don't * need to flip bits or the compression routine is * going to handle this operation itself. In this * case, avoid copying the raw data and instead just * reference the data from the memory mapped file * image. This assumes that the decompression * routines do not modify the contents of the raw data * buffer (if they try to, the application will get a * fault since the file is mapped read-only). */ if ((tif->tif_flags & TIFF_MYBUFFER) && tif->tif_rawdata) { _TIFFfree(tif->tif_rawdata); tif->tif_rawdata = NULL; tif->tif_rawdatasize = 0; } tif->tif_flags &= ~TIFF_MYBUFFER; /* * We must check for overflow, potentially causing * an OOB read. Instead of simple * * td->td_stripoffset[tile]+bytecount > tif->tif_size * * comparison (which can overflow) we do the following * two comparisons: */ if (bytecount > (uint64)tif->tif_size || td->td_stripoffset[tile] > (uint64)tif->tif_size - bytecount) { tif->tif_curtile = NOTILE; return (0); } tif->tif_rawdatasize = (tmsize_t)bytecount; tif->tif_rawdata = tif->tif_base + (tmsize_t)td->td_stripoffset[tile]; tif->tif_rawdataoff = 0; tif->tif_rawdataloaded = (tmsize_t) bytecount; tif->tif_flags |= TIFF_BUFFERMMAP; } else { /* * Expand raw data buffer, if needed, to hold data * tile coming from file (perhaps should set upper * bound on the size of a buffer we'll use?). */ tmsize_t bytecountm; bytecountm=(tmsize_t)bytecount; if ((uint64)bytecountm!=bytecount) { TIFFErrorExt(tif->tif_clientdata,module,"Integer overflow"); return(0); } if (bytecountm > tif->tif_rawdatasize) { tif->tif_curtile = NOTILE; if ((tif->tif_flags & TIFF_MYBUFFER) == 0) { TIFFErrorExt(tif->tif_clientdata, module, "Data buffer too small to hold tile %lu", (unsigned long) tile); return (0); } if (!TIFFReadBufferSetup(tif, 0, bytecountm)) return (0); } if (tif->tif_flags&TIFF_BUFFERMMAP) { tif->tif_curtile = NOTILE; if (!TIFFReadBufferSetup(tif, 0, bytecountm)) return (0); } if (TIFFReadRawTile1(tif, tile, tif->tif_rawdata, bytecountm, module) != bytecountm) return (0); tif->tif_rawdataoff = 0; tif->tif_rawdataloaded = bytecountm; if (!isFillOrder(tif, td->td_fillorder) && (tif->tif_flags & TIFF_NOBITREV) == 0) TIFFReverseBits(tif->tif_rawdata, tif->tif_rawdataloaded); } } return (TIFFStartTile(tif, tile)); } /* * Setup the raw data buffer in preparation for * reading a strip of raw data. If the buffer * is specified as zero, then a buffer of appropriate * size is allocated by the library. Otherwise, * the client must guarantee that the buffer is * large enough to hold any individual strip of * raw data. */ int TIFFReadBufferSetup(TIFF* tif, void* bp, tmsize_t size) { static const char module[] = "TIFFReadBufferSetup"; assert((tif->tif_flags&TIFF_NOREADRAW)==0); tif->tif_flags &= ~TIFF_BUFFERMMAP; if (tif->tif_rawdata) { if (tif->tif_flags & TIFF_MYBUFFER) _TIFFfree(tif->tif_rawdata); tif->tif_rawdata = NULL; tif->tif_rawdatasize = 0; } if (bp) { tif->tif_rawdatasize = size; tif->tif_rawdata = (uint8*) bp; tif->tif_flags &= ~TIFF_MYBUFFER; } else { tif->tif_rawdatasize = (tmsize_t)TIFFroundup_64((uint64)size, 1024); if (tif->tif_rawdatasize==0) { TIFFErrorExt(tif->tif_clientdata, module, "Invalid buffer size"); return (0); } tif->tif_rawdata = (uint8*) _TIFFmalloc(tif->tif_rawdatasize); tif->tif_flags |= TIFF_MYBUFFER; } if (tif->tif_rawdata == NULL) { TIFFErrorExt(tif->tif_clientdata, module, "No space for data buffer at scanline %lu", (unsigned long) tif->tif_row); tif->tif_rawdatasize = 0; return (0); } return (1); } /* * Set state to appear as if a * strip has just been read in. */ static int TIFFStartStrip(TIFF* tif, uint32 strip) { TIFFDirectory *td = &tif->tif_dir; if (!_TIFFFillStriles( tif ) || !tif->tif_dir.td_stripbytecount) return 0; if ((tif->tif_flags & TIFF_CODERSETUP) == 0) { if (!(*tif->tif_setupdecode)(tif)) return (0); tif->tif_flags |= TIFF_CODERSETUP; } tif->tif_curstrip = strip; tif->tif_row = (strip % td->td_stripsperimage) * td->td_rowsperstrip; tif->tif_flags &= ~TIFF_BUF4WRITE; if (tif->tif_flags&TIFF_NOREADRAW) { tif->tif_rawcp = NULL; tif->tif_rawcc = 0; } else { tif->tif_rawcp = tif->tif_rawdata; tif->tif_rawcc = (tmsize_t)td->td_stripbytecount[strip]; } return ((*tif->tif_predecode)(tif, (uint16)(strip / td->td_stripsperimage))); } /* * Set state to appear as if a * tile has just been read in. */ static int TIFFStartTile(TIFF* tif, uint32 tile) { TIFFDirectory *td = &tif->tif_dir; if (!_TIFFFillStriles( tif ) || !tif->tif_dir.td_stripbytecount) return 0; if ((tif->tif_flags & TIFF_CODERSETUP) == 0) { if (!(*tif->tif_setupdecode)(tif)) return (0); tif->tif_flags |= TIFF_CODERSETUP; } tif->tif_curtile = tile; tif->tif_row = (tile % TIFFhowmany_32(td->td_imagewidth, td->td_tilewidth)) * td->td_tilelength; tif->tif_col = (tile % TIFFhowmany_32(td->td_imagelength, td->td_tilelength)) * td->td_tilewidth; tif->tif_flags &= ~TIFF_BUF4WRITE; if (tif->tif_flags&TIFF_NOREADRAW) { tif->tif_rawcp = NULL; tif->tif_rawcc = 0; } else { tif->tif_rawcp = tif->tif_rawdata; tif->tif_rawcc = (tmsize_t)td->td_stripbytecount[tile]; } return ((*tif->tif_predecode)(tif, (uint16)(tile/td->td_stripsperimage))); } static int TIFFCheckRead(TIFF* tif, int tiles) { if (tif->tif_mode == O_WRONLY) { TIFFErrorExt(tif->tif_clientdata, tif->tif_name, "File not open for reading"); return (0); } if (tiles ^ isTiled(tif)) { TIFFErrorExt(tif->tif_clientdata, tif->tif_name, tiles ? "Can not read tiles from a stripped image" : "Can not read scanlines from a tiled image"); return (0); } return (1); } void _TIFFNoPostDecode(TIFF* tif, uint8* buf, tmsize_t cc) { (void) tif; (void) buf; (void) cc; } void _TIFFSwab16BitData(TIFF* tif, uint8* buf, tmsize_t cc) { (void) tif; assert((cc & 1) == 0); TIFFSwabArrayOfShort((uint16*) buf, cc/2); } void _TIFFSwab24BitData(TIFF* tif, uint8* buf, tmsize_t cc) { (void) tif; assert((cc % 3) == 0); TIFFSwabArrayOfTriples((uint8*) buf, cc/3); } void _TIFFSwab32BitData(TIFF* tif, uint8* buf, tmsize_t cc) { (void) tif; assert((cc & 3) == 0); TIFFSwabArrayOfLong((uint32*) buf, cc/4); } void _TIFFSwab64BitData(TIFF* tif, uint8* buf, tmsize_t cc) { (void) tif; assert((cc & 7) == 0); TIFFSwabArrayOfDouble((double*) buf, cc/8); } /* vim: set ts=8 sts=8 sw=8 noet: */ /* * Local Variables: * mode: c * c-basic-offset: 8 * fill-column: 78 * End: */