path: root/debian/patches/100_spelling.patch

Description: correct some typos
Author: Jörg Frings-Fürst <debian@jff-webhosting.net>
Last-Update: 2015-09-30
---
This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
Index: trunk/spectro/dispcal.c
===================================================================
--- trunk.orig/spectro/dispcal.c
+++ trunk/spectro/dispcal.c
@@ -1937,7 +1937,7 @@ int main(int argc, char *argv[]) {
 			/* Serial port flow control */
 			} else if (argv[fa][1] == 'W') {
 				fa = nfa;
-				if (na == NULL) usage(0,"Paramater expected following -W");
+				if (na == NULL) usage(0,"Parameter expected following -W");
 				if (na[0] == 'n' || na[0] == 'N')
 					fc = fc_none;
 				else if (na[0] == 'h' || na[0] == 'H')
@@ -1960,13 +1960,13 @@ int main(int argc, char *argv[]) {
 			/* Black point correction amount */
 			} else if (argv[fa][1] == 'k') {
 				fa = nfa;
-				if (na == NULL) usage(0,"Paramater expected following -k");
+				if (na == NULL) usage(0,"Parameter expected following -k");
 				bkcorrect = atof(na);
 				if (bkcorrect < 0.0 || bkcorrect > 1.0) usage(0,"-k parameter must be between 0.0 and 1.0");
 			/* Neutral blend rate (power) */
 			} else if (argv[fa][1] == 'A') {
 				fa = nfa;
-				if (na == NULL) usage(0,"Paramater expected following -A");
+				if (na == NULL) usage(0,"Parameter expected following -A");
 				x.nbrate = atof(na);
 				if (x.nbrate < 0.05 || x.nbrate > 20.0) usage(0,"-A parameter must be between 0.05 and 20.0");
 			/* Black brightness */
@@ -1999,7 +1999,7 @@ int main(int argc, char *argv[]) {
 			/* COM port  */
 			} else if (argv[fa][1] == 'c') {
 				fa = nfa;
-				if (na == NULL) usage(0,"Paramater expected following -c");
+				if (na == NULL) usage(0,"Parameter expected following -c");
 				comport = atoi(na);
 				if (comport < 1 || comport > 50) usage(0,"-c parameter %d out of range",comport);
 
@@ -3063,7 +3063,7 @@ int main(int argc, char *argv[]) {
 			/* Black level adjustment */
 			/* Due to the possibility of the channel offsets not being even, */
 			/* we use the largest of the XYZ values after they have been */
-			/* scaled to be even acording to the white XYZ balance. */
+			/* scaled to be even according to the white XYZ balance. */
 			/* It's safer to set the black level a bit low, and then the */
 			/* calibration curves can bump the low ones up. */
 			if (c == '1') {
Index: trunk/spectro/spotread.c
===================================================================
--- trunk.orig/spectro/spotread.c
+++ trunk/spectro/spotread.c
@@ -483,7 +483,7 @@ int main(int argc, char *argv[]) {
 			/* COM port  */
 			} else if (argv[fa][1] == 'c') {
 				fa = nfa;
-				if (na == NULL) usage("Paramater expected following -c");
+				if (na == NULL) usage("Parameter expected following -c");
 				{
 					comport = atoi(na);
 					if (comport < 1 || comport > 40) usage("-c parameter %d out of range",comport);
@@ -492,7 +492,7 @@ int main(int argc, char *argv[]) {
 			/* Display type */
 			} else if (argv[fa][1] == 'y') {
 				fa = nfa;
-				if (na == NULL) usage("Paramater expected following -y");
+				if (na == NULL) usage("Parameter expected following -y");
 				dtype = na[0];
 
 #ifndef SALONEINSTLIB
@@ -500,7 +500,7 @@ int main(int argc, char *argv[]) {
 			} else if (argv[fa][1] == 'I') {
 
 				fa = nfa;
-				if (na == NULL) usage("Paramater expected following -I");
+				if (na == NULL) usage("Parameter expected following -I");
 				if (strcmp(na, "A") == 0
 				 || strcmp(na, "M0") == 0) {
 					tillum_set = spec = 1;
@@ -539,7 +539,7 @@ int main(int argc, char *argv[]) {
 			/* Spectral Illuminant type for XYZ computation */
 			} else if (argv[fa][1] == 'i') {
 				fa = nfa;
-				if (na == NULL) usage("Paramater expected following -i");
+				if (na == NULL) usage("Parameter expected following -i");
 				if (strcmp(na, "A") == 0) {
 					illum_set = spec = 1;
 					illum = icxIT_A;
@@ -579,7 +579,7 @@ int main(int argc, char *argv[]) {
 			/* Spectral Observer type */
 			} else if (argv[fa][1] == 'Q') {
 				fa = nfa;
-				if (na == NULL) usage("Paramater expected following -Q");
+				if (na == NULL) usage("Parameter expected following -Q");
 				if (strcmp(na, "1931_2") == 0) {			/* Classic 2 degree */
 					obType = icxOT_CIE_1931_2;
 				} else if (strcmp(na, "1964_10") == 0) {	/* Classic 10 degree */
@@ -657,7 +657,7 @@ int main(int argc, char *argv[]) {
 			/* Filter configuration */
 			} else if (argv[fa][1] == 'F') {
 				fa = nfa;
-				if (na == NULL) usage("Paramater expected following -F");
+				if (na == NULL) usage("Parameter expected following -F");
 				if (na[0] == 'n' || na[0] == 'N')
 					fe = inst_opt_filter_none;
 				else if (na[0] == 'p' || na[0] == 'P')
@@ -672,7 +672,7 @@ int main(int argc, char *argv[]) {
 			/* Extra filter compensation file */
 			} else if (argv[fa][1] == 'E') {
 				fa = nfa;
-				if (na == NULL) usage("Paramater expected following -E");
+				if (na == NULL) usage("Parameter expected following -E");
 				strncpy(filtername,na,MAXNAMEL-1); filtername[MAXNAMEL-1] = '\000';
 
 			/* Show Yxy */
Index: trunk/spectro/colorhug.c
===================================================================
--- trunk.orig/spectro/colorhug.c
+++ trunk/spectro/colorhug.c
@@ -212,7 +212,7 @@ colorhug_command(colorhug *p,
 
 	a1logd(p->log,8,"colorhug_command: Read %d bytes and %d read\n",xrbytes,rbytes);
 	if (rbytes >= 2) {
-		a1logd(p->log,6,"colorhug_command: recieved cmd '%s' error '%s' args '%s'\n",
+		a1logd(p->log,6,"colorhug_command: received cmd '%s' error '%s' args '%s'\n",
 				inst_desc(buf[1]),
 				colorhug_interp_error((inst *) p, buf[0]),
 				icoms_tohex(buf, rbytes - 2));
Index: trunk/spectro/dispwin.c
===================================================================
--- trunk.orig/spectro/dispwin.c
+++ trunk/spectro/dispwin.c
@@ -2734,7 +2734,7 @@ int dispwin_install_profile(dispwin *p,
 
 /* Un-Install a display profile */
 /* Return nz if failed, */
-/* 1 if not sucessfully deleted */
+/* 1 if not successfully deleted */
 /* 2 if profile not found */
 int dispwin_uninstall_profile(dispwin *p, char *fname, p_scope scope) {
 	debugr2((errout,"dispwin_uninstall_profile '%s'\n", fname));
@@ -5128,7 +5128,7 @@ int ddebug						/* >0 to print debug sta
 		p->native = native &= ~2;
 	}
 
-	debugr("new_dispwin: return sucessfully\n");
+	debugr("new_dispwin: return successfully\n");
 	return p;
 }
 
Index: trunk/spectro/dtp51.c
===================================================================
--- trunk.orig/spectro/dtp51.c
+++ trunk/spectro/dtp51.c
@@ -679,7 +679,7 @@ dtp51_interp_error(inst *pp, int ec) {
 		case DTP51_INVALID_STEP:
 			return "Invalid step";
 		case DTP51_NO_DATA_AVAILABLE:
-			return "No data availble";
+			return "No data avaialble";
 		case DTP51_LAMP_MARGINAL:
 			return "Lamp marginal";
 		case DTP51_LAMP_FAILURE:
Index: trunk/spectro/dtp92.c
===================================================================
--- trunk.orig/spectro/dtp92.c
+++ trunk/spectro/dtp92.c
@@ -928,7 +928,7 @@ dtp92_interp_error(inst *pp, int ec) {
 		case DTP92_NO_DATA_AVAILABLE:
 			return "No data available";
 		case DTP92_MISSING_PARAMETER:
-			return "Paramter is missing";
+			return "Parameter is missing";
 		case DTP92_CALIBRATION_DENIED:
 			return "Invalid calibration enable code";
 		case DTP92_NEEDS_OFFSET_CAL:
Index: trunk/spectro/hidio.c
===================================================================
--- trunk.orig/spectro/hidio.c
+++ trunk/spectro/hidio.c
@@ -739,7 +739,7 @@ icoms_hid_read(icoms *p,
 	{
 		unsigned char *rbuf2;
 
-		/* Create a copy of the data recieved with one more byte */
+		/* Create a copy of the data received with one more byte */
 		if ((rbuf2 = malloc(bsize + 1)) == NULL) {
 			a1loge(p->log, ICOM_SYS, "icoms_hid_read: malloc failed\n");
 			return ICOM_SYS;
Index: trunk/spectro/huey.c
===================================================================
--- trunk.orig/spectro/huey.c
+++ trunk/spectro/huey.c
@@ -81,7 +81,7 @@ static int icoms2huey_err(int se, int to
 /* i1Display command codes */
 /* B = byte (8bit), S = short (16bit), W = word (32bit), A = string */
 /* U = unused byte, - = no arguments/results */
-/* The is a 7 byte command buffer and 6 response recieve buffer. */
+/* The is a 7 byte command buffer and 6 response receive buffer. */
 /* :2 means the read is from a second 8 byte ep x81 read. */
 /* cbuf[-] is command byte */
 /* rbuf[-2] is continuation byte */
Index: trunk/spectro/i1pro_imp.c
===================================================================
--- trunk.orig/spectro/i1pro_imp.c
+++ trunk/spectro/i1pro_imp.c
@@ -3768,7 +3768,7 @@ i1pro_code i1pro_restore_refspot_cal(i1p
 		return I1PRO_OK;
 	}
 
-	/* We've sucessfully restored the dark calibration */
+	/* We've successfully restored the dark calibration */
 	s->dark_valid = 1;
 	s->ddate = m->caldate;
 
@@ -3813,7 +3813,7 @@ i1pro_code i1pro_restore_refspot_cal(i1p
 		return I1PRO_OK;
 	}
 
-	/* We've sucessfully restored the calibration */
+	/* We've successfully restored the calibration */
 	s->cal_valid = 1;
 	s->cfdate = m->caldate;
 
Index: trunk/spectro/madvrwin.c
===================================================================
--- trunk.orig/spectro/madvrwin.c
+++ trunk/spectro/madvrwin.c
@@ -593,7 +593,7 @@ int ii = 0;
 	}
 #endif
 
-	debugr("new_madvrwin: return sucessfully\n");
+	debugr("new_madvrwin: return successfully\n");
 
 	return p;
 }
Index: trunk/spectro/ss.c
===================================================================
--- trunk.orig/spectro/ss.c
+++ trunk/spectro/ss.c
@@ -1787,7 +1787,7 @@ ss_interp_error(inst *pp, int ec) {
 		case ss_et_BadHexEncoding:
 			return "Message received from instrument has bad Hex encoding";
 		case ss_et_RecBufferOverun:
-			return "Message received from instrument would overflow recieve buffer";
+			return "Message received from instrument would overflow receive buffer";
 		default:
 			return "Unknown error code";
 	}
Index: trunk/spectro/ss_imp.c
===================================================================
--- trunk.orig/spectro/ss_imp.c
+++ trunk/spectro/ss_imp.c
@@ -216,7 +216,7 @@ static int h2b(ss *p, char c) {
 	return 0;
 }
 
-/* Return the first enum from the recieve buffer without removing it. */
+/* Return the first enum from the receive buffer without removing it. */
 int ss_peek_ans(ss *p) {
 	int rv;
 
Index: trunk/spectro/webwin.c
===================================================================
--- trunk.orig/spectro/webwin.c
+++ trunk/spectro/webwin.c
@@ -396,7 +396,7 @@ int ddebug						/* >0 to print debug sta
 		msec_sleep(50);
 	}
 
-	debugr("new_webwin: return sucessfully\n");
+	debugr("new_webwin: return successfully\n");
 
 	return p;
 }
Index: trunk/xicc/cv.c
===================================================================
--- trunk.orig/xicc/cv.c
+++ trunk/xicc/cv.c
@@ -101,7 +101,7 @@ main(int argc, char *argv[]) {
 
 	printf("There are %d parameters:\n",np); fflush(stdout);
 	for (i = 0; i < np; i++) {
-		printf("Paramter %d = %f\n",i, params[i]); fflush(stdout);
+		printf("Parameter %d = %f\n",i, params[i]); fflush(stdout);
 	}
 
 	/* Display the result */
Index: trunk/spectro/ss_imp.h
===================================================================
--- trunk.orig/spectro/ss_imp.h
+++ trunk/spectro/ss_imp.h
@@ -720,7 +720,7 @@ void ss_add_string(struct _ss *p, char *
 /* - - - - - - - - - - - - - - - - - - - - - */
 /* ANSWER: */
 
-/* Return the first enum from the recieve buffer without removing it. */
+/* Return the first enum from the receive buffer without removing it. */
 int ss_peek_ans(struct _ss *p);
 
 /* Remove a Spectrolino answer enum from the revieve buffer, */
Index: trunk/imdi/cctiff.c
===================================================================
--- trunk.orig/imdi/cctiff.c
+++ trunk/imdi/cctiff.c
@@ -36,7 +36,7 @@
 	Add flag to ignore inkname mismatches.
 
 
-	Should add support for transfering any extra alpha
+	Should add support for transferring any extra alpha
 	planes from input to output, rather than simply ignoring them.
 
 
@@ -1953,11 +1953,11 @@ main(int argc, char *argv[]) {
 
 		if (wh != NULL) {
 			printf("Output TIFF file '%s'\n",out_name);
-			printf("Ouput raster file ICC colorspace is %s\n",icm2str(icmColorSpaceSignature,su.outs));
+			printf("Output raster file ICC colorspace is %s\n",icm2str(icmColorSpaceSignature,su.outs));
 			printf("Output TIFF file photometric is %s\n",Photometric2str(wphotometric));
 		} else {
 			printf("Output JPEG file '%s'\n",out_name);
-			printf("Ouput raster file ICC colorspace is %s\n",icm2str(icmColorSpaceSignature,su.outs));
+			printf("Output raster file ICC colorspace is %s\n",icm2str(icmColorSpaceSignature,su.outs));
 			printf("Output JPEG file colorspace is %s\n",JPEG_cspace2str(wj.jpeg_color_space));
 			if (wdesc != NULL)
 				printf("Output raster file description: '%s'\n",wdesc);
Index: trunk/imdi/imdi.h
===================================================================
--- trunk.orig/imdi/imdi.h
+++ trunk/imdi/imdi.h
@@ -38,7 +38,7 @@ struct _imdi {
 
 	/* Note that once an imdi is created, multiple can call interp() without */
 	/* interfering with each other, allowing parallel execution. */
-	void (*interp)(struct _imdi *s, void **outp, int outst,		/* Ouput pointers and stride */
+	void (*interp)(struct _imdi *s, void **outp, int outst,		/* Output pointers and stride */
 	                                void **inp, int inst,		/* Input pointers and stride */
 	                                unsigned int npixels);		/* Number of pixels */
 
Index: trunk/spectro/munki_imp.c
===================================================================
--- trunk.orig/spectro/munki_imp.c
+++ trunk/spectro/munki_imp.c
@@ -6393,7 +6393,7 @@ munki_code munki_create_hr(munki *p, int
 	int i, j, jj, k, cx, sx;
 	munki_fc coeff[40][16];	/* Existing filter cooefficients */
 	int nwav1;					/* Number of filters */
-	double wl_short1, wl_long1;	/* Ouput wavelength of first and last filters */
+	double wl_short1, wl_long1;	/* Output wavelength of first and last filters */
 	double wl_step1;
 	munki_xp xp[41];			/* Crossover points each side of filter */
 	munki_code ev = MUNKI_OK;
Index: trunk/target/printtarg.c
===================================================================
--- trunk.orig/target/printtarg.c
+++ trunk/target/printtarg.c
@@ -2209,7 +2209,7 @@ int *p_npat			/* Return number of patche
 
 
 	} else {
-		error("Unsupported intrument type");
+		error("Unsupported instrument type");
 	}
 	
 	/* Compute page limits */
@@ -2953,7 +2953,7 @@ char *argv[];
 	double sscale = 1.0;	/* Spacer size scale */
 	int rand = 1;
 	int qbits = 0;			/* Quantization bits */
-	int oft = 0;			/* Ouput File type, 0 = PS, 1 = EPS , 2 = TIFF */
+	int oft = 0;			/* Output File type, 0 = PS, 1 = EPS , 2 = TIFF */
 	int nocups = 0;			/* Supress CUPS PS/EPS job ticket */
 	depth2d tiffdpth = bpc8_2d;	/* TIFF pixel depth */
 	double tiffres = 100.0;	/* TIFF resolution in DPI */
Index: trunk/gamut/nearsmth.c
===================================================================
--- trunk.orig/gamut/nearsmth.c
+++ trunk/gamut/nearsmth.c
@@ -261,7 +261,7 @@ double dxratio		/* Depth expansion ratio
 	double va, vr = 0.0, vl, vd, vv = 0.0;
 
 	/* Absolute, Delta E^2 between test point and destination closest */
-	/* aodv is already positioned acording to the LCh weights, */
+	/* aodv is already positioned according to the LCh weights, */
 	/* so weight as per average of these */
 	a_o = w->a.o;
 	va = wdesq(dtp, aodv, a_o, a_o, a_o, SUM_POW);
@@ -3598,7 +3598,7 @@ static void create_influence_plot(nearsm
 	swdiag = new_rspl(RSPL_NOFLAGS, 3, 3);	/* Allocate 3D -> 3D */
 	swdiag->fit_rspl(swdiag, RSPL_NOFLAGS, fpnts, nmpts, NULL, NULL, gres, NULL, NULL, 1.0, avgdev, NULL);
 
-	/* Now create a plot of the sci_gam with the vertexes colored acording to the */
+	/* Now create a plot of the sci_gam with the vertexes colored according to the */
 	/* diagnostic map. */
 	if ((wrl = new_vrml("sci_gam_wt", 1, vrml_lab)) == NULL) {
 		fprintf(stderr,"gamut map: new_vrml failed for '%s%s'\n","sci_gam_wt",vrm_ext());
Index: trunk/gamut/nearsmth.h
===================================================================
--- trunk.orig/gamut/nearsmth.h
+++ trunk/gamut/nearsmth.h
@@ -274,7 +274,7 @@ gammapweights *src1, double wgt1,
 gammapweights *src2, double wgt2
 );
 
-/* Tweak weights acording to extra cmy cusp flags or rel override */
+/* Tweak weights according to extra cmy cusp flags or rel override */
 void tweak_weights(gammapweights out[14], int dst_cmymap, int rel_oride);
 
 #endif /* NEARSMTH_H */
Index: trunk/imdi/cctiffo.c
===================================================================
--- trunk.orig/imdi/cctiffo.c
+++ trunk/imdi/cctiffo.c
@@ -307,7 +307,7 @@ int pmtc
 		case PHOTOMETRIC_LOGLUV:
 			return "CIELog2Luv";
 	}
-	sprintf(buf,"Unknonw Tag %d",pmtc);
+	sprintf(buf,"Unknown Tag %d",pmtc);
 	return buf;
 }
 
Index: trunk/imdi/greytiff.c
===================================================================
--- trunk.orig/imdi/greytiff.c
+++ trunk/imdi/greytiff.c
@@ -132,7 +132,7 @@ int pmtc
 		case PHOTOMETRIC_LOGLUV:
 			return "CIELog2Luv";
 	}
-	sprintf(buf,"Unknonw Tag %d",pmtc);
+	sprintf(buf,"Unknown Tag %d",pmtc);
 	return buf;
 }
 
Index: trunk/link/collink.c
===================================================================
--- trunk.orig/link/collink.c
+++ trunk/link/collink.c
@@ -1138,7 +1138,7 @@ void devip_devop(void *cntx, double *out
 			}
 			/* We've got the input profile PCS' at this point. */
 
-			/* If we're transfering the K value from the input profile to the */
+			/* If we're transferring the K value from the input profile to the */
 			/* output, copy it into locus[], which will be given to the inverse */
 			/* lookup function, else the inverse lookup will generate a K using */
 			/* the curve parameters. */  
@@ -1270,7 +1270,7 @@ void devip_devop(void *cntx, double *out
 		if (p->nhack == 2) {
 			/* Ideally we would create a 4D PCSK -> PCSK gamut mapping */
 			/* to smoothly and accurately cope with the changing source */
-			/* and destination gamuts acording to their degree of "K onlyness". */
+			/* and destination gamuts according to their degree of "K onlyness". */
 			/* In practice we're going to simply interpolated between */
 			/* two extremes: unrestricted gamut and K only black gamut. */
 			double map0[3], map1[3];
Index: trunk/profile/printcal.c
===================================================================
--- trunk.orig/profile/printcal.c
+++ trunk/profile/printcal.c
@@ -1294,7 +1294,7 @@ int main(int argc, char *argv[]) {
 				icmXYZ2Lab(&wht, wp->Lab, wp->XYZ);
 			}
 
-			/* Sort the channel acording to device value */ 
+			/* Sort the channel according to device value */
 			/* For a consistent result for identical device values, */
 			/* secondary sort by inverse CIE value */
 //#define HEAP_COMPARE(A,B) ((A).dev < (B).dev)
Index: trunk/spectro/dispsup.c
===================================================================
--- trunk.orig/spectro/dispsup.c
+++ trunk/spectro/dispsup.c
@@ -707,7 +707,7 @@ static int disprd_read_imp(
 		scb->serno = p->serno++;
 		scb->msec = msec_time();
 
-		a1logd(p->log,1, "got reading %f %f %f, transfering to col\n",
+		a1logd(p->log,1, "got reading %f %f %f, transferring to col\n",
 		                val.XYZ[0], val.XYZ[1], val.XYZ[2]);
 
 		scb->mtype = val.mtype;
Index: trunk/gamut/gammap.c
===================================================================
--- trunk.orig/gamut/gammap.c
+++ trunk/gamut/gammap.c
@@ -775,7 +775,7 @@ gammap *new_gammap(
 #endif
 			if (gmi->bph == gmm_clipBP) {
 
-				/* Extend the target black point to accomodate the */
+				/* Extend the target black point to accommodate the */
 				/* bent or clipped destination space L* range */
 				if (fabp[0] < dr_cs_bp[0]) {
 					t = (fabp[0] - dr_cs_wp[0])/(dr_cs_bp[0] - dr_cs_wp[0]);
Index: trunk/profile/profout.c
===================================================================
--- trunk.orig/profile/profout.c
+++ trunk/profile/profout.c
@@ -1048,7 +1048,7 @@ make_output_icc(
 		if (iccver < icmVersion2_4) {
 			iccver = icmVersion2_4;		/* Need 2.4.0 for Display intents */
 			if (verb)
-				fprintf(verbo,"Bumped ICC version to 2.4.0 to accomodate multiple Display intents\n");
+				fprintf(verbo,"Bumped ICC version to 2.4.0 to accommodate multiple Display intents\n");
 		}
 	}
 	if (wr_icco->set_version(wr_icco, iccver) != 0)
Index: trunk/render/thscreen.c
===================================================================
--- trunk.orig/render/thscreen.c
+++ trunk/render/thscreen.c
@@ -636,7 +636,7 @@ thscreen *new_thscreen(
 	mrang = 65535.0/(t->oelev - 1.0); 
 	DBG(("new_thscreen() raw modulation rande = %f\n",mrang));
 
-	/* Modify the modulation range to accomodate any level overlap */
+	/* Modify the modulation range to accommodate any level overlap */
 	if (olap > 0.0 && t->oelev > 2) {
 		mrang = ((t->oelev - 2.0) * olap * mrang + 65535.0)/(t->oelev - 1.0);
 		DBG(("new_thscreen() modulation adjusted for overlap = %f\n",mrang));
Index: trunk/xicc/xspect.c
===================================================================
--- trunk.orig/xicc/xspect.c
+++ trunk/xicc/xspect.c
@@ -4440,7 +4440,7 @@ void xspect_plot10(xspect *sp, int n) {
 /* Given an emission spectrum, set the UV output to the given level. */
 /* The shape of the UV is taken from FWA1_stim, and the level is */
 /* with respect to the Y of the input spectrum. */
-/* The output range is extended to accomodate the UV wavelengths */
+/* The output range is extended to accommodate the UV wavelengths */
 void xsp_setUV(xspect *out, xspect *in, double uvlevel) {
 	int i, xs, xe;
 	double ww, avg;
Index: trunk/spectro/ccxxmake.c
===================================================================
--- trunk.orig/spectro/ccxxmake.c
+++ trunk/spectro/ccxxmake.c
@@ -395,7 +395,7 @@ int main(int argc, char *argv[]) {
 			/* COM port  */
 			} else if (argv[fa][1] == 'c') {
 				fa = nfa;
-				if (na == NULL) usage(0,"Paramater expected following -c");
+				if (na == NULL) usage(0,"Parameter expected following -c");
 				comno = atoi(na);
 				if (comno < 1 || comno > 40) usage(0,"-c parameter %d out of range",comno);
 
@@ -495,7 +495,7 @@ int main(int argc, char *argv[]) {
 			/* Serial port flow control */
 			} else if (argv[fa][1] == 'W') {
 				fa = nfa;
-				if (na == NULL) usage(0,"Paramater expected following -W");
+				if (na == NULL) usage(0,"Parameter expected following -W");
 				if (na[0] == 'n' || na[0] == 'N')
 					fc = fc_none;
 				else if (na[0] == 'h' || na[0] == 'H')
@@ -584,7 +584,7 @@ int main(int argc, char *argv[]) {
 		strcat(outname, doccss ? ".ccss" : ".ccmx");
 
 	if (fakeseq && doccss)
-		error("Fake CCSS test not implemeted");
+		error("Fake CCSS test not implemented");
 
 	printf("\n");
 
Index: trunk/spectro/dispread.c
===================================================================
--- trunk.orig/spectro/dispread.c
+++ trunk/spectro/dispread.c
@@ -413,7 +413,7 @@ int main(int argc, char *argv[]) {
 			/* COM port  */
 			} else if (argv[fa][1] == 'c') {
 				fa = nfa;
-				if (na == NULL) usage(0,"Paramater expected following -c");
+				if (na == NULL) usage(0,"Parameter expected following -c");
 				comport = atoi(na);
 				if (comport < 1 || comport > 50) usage(0,"-c parameter %d out of range",comport);
 
Index: trunk/spectro/fakeread.c
===================================================================
--- trunk.orig/spectro/fakeread.c
+++ trunk/spectro/fakeread.c
@@ -814,7 +814,7 @@ int main(int argc, char *argv[])
 
 		/* We're assuming that the input space has a perfect black point... */
 
-		/* Lookup the ouput black point in XYZ PCS. We're assuming monotonicity.. */
+		/* Lookup the output black point in XYZ PCS. We're assuming monotonicity.. */
 		bp[0] = bp[1] = bp[2] = 0.0;
 		oluo->lookup(oluo, bp, bp);
 
@@ -827,7 +827,7 @@ int main(int argc, char *argv[])
 		             bt1886 == 1 ? egamma : tgamma, bt1886 == 1 ? 1 : 0);
 
 		if (verb)
-			printf("Gamma Curve: Using ouput black offset proportion %f\n",outoprop);
+			printf("Gamma Curve: Using output black offset proportion %f\n",outoprop);
 
 		if (bt1886 == 1) {		/* Using effective gamma */
 			if (verb)
Index: trunk/profile/invprofcheck.c
===================================================================
--- trunk.orig/profile/invprofcheck.c
+++ trunk/profile/invprofcheck.c
@@ -99,7 +99,7 @@ void usage(void) {
 	fprintf(stderr," -k           Show CIEDE2000 delta E values\n");
 	fprintf(stderr," -w           create %s visualisation (profile%s)\n",vrml_format(),vrml_ext());
 	fprintf(stderr," -x           Use %s axes\n",vrml_format());
-	fprintf(stderr," -e           Color vectors acording to delta E\n");
+	fprintf(stderr," -e           Color vectors according to delta E\n");
 	fprintf(stderr," profile.icm  Profile to check\n");
 	exit(1);
 }
Index: trunk/profile/profcheck.c
===================================================================
--- trunk.orig/profile/profcheck.c
+++ trunk/profile/profcheck.c
@@ -59,7 +59,7 @@ usage(void) {
 	fprintf(stderr," -w              create %s visualisation (iccprofile%s)\n",vrml_format(),vrml_ext());
 	fprintf(stderr," -x              Use %s axes\n",vrml_format());
 	fprintf(stderr," -m              Make %s lines a minimum of 0.5\n",vrml_format());
-	fprintf(stderr," -e              Color vectors acording to delta E\n");
+	fprintf(stderr," -e              Color vectors according to delta E\n");
 	fprintf(stderr," -h              Plot a histogram of delta E's\n");
 	fprintf(stderr," -s              Sort output by delta E\n");
 	fprintf(stderr," -P N.NN         Create a pruned .ti3 with points less or equal to N.NN delta E\n");
Index: trunk/spectro/ccwin.c
===================================================================
--- trunk.orig/spectro/ccwin.c
+++ trunk/spectro/ccwin.c
@@ -827,7 +827,7 @@ int ddebug						/* >0 to print debug sta
 		return NULL;
 	}
 
-	debugr2((errout,"new_ccwin: return sucessfully\n"));
+	debugr2((errout,"new_ccwin: return successfully\n"));
 
 	return p;
 }
Index: trunk/profile/colverify.c
===================================================================
--- trunk.orig/profile/colverify.c
+++ trunk/profile/colverify.c
@@ -68,7 +68,7 @@ usage(void) {
 	fprintf(stderr," -D              Use D50 100.0 as L*a*b* white reference\n");
 	fprintf(stderr," -c              Show CIE94 delta E values\n");
 	fprintf(stderr," -k              Show CIEDE2000 delta E values\n");
-	fprintf(stderr," -h [hist.txt]   Plot a histogram of delta E's [Optionaly save points to .txt]\n");
+	fprintf(stderr," -h [hist.txt]   Plot a histogram of delta E's [Optionally save points to .txt]\n");
 	fprintf(stderr," -s              Sort patch values by error\n");
 	fprintf(stderr," -w              create PCS %s vector visualisation (measured%s)\n",vrml_format(),vrml_ext());
 	fprintf(stderr," -W              create PCS %s marker visualisation (measured%s)\n",vrml_format(),vrml_ext());