1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
|
<!DOCTYPE doctype PUBLIC "-//w3c//dtd html 4.0 transitional//en">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=windows-1252">
<meta name="author" content="Graeme Gill">
<meta name="description" content="Root of Argyll CMS documentation">
<meta name="GENERATOR" content="Mozilla/4.73 [en] (WinNT; I)
[Netscape]">
<meta name="Author" content="Graeme Gill">
<meta name="Description" content="Summary of changes for the most
recent release.">
<title>Argyll CMS changes since last release</title>
</head>
<body>
<h1> Summary of Argyll CMS Changes since last release</h1>
<h3>For a <span style="text-decoration: underline;">complete</span>
and more detailed list of changes, please see the log.txt file.</h3>
<h1>[V1.6.3 -> V1.7.0] 1st May 2015</h1>
<ul>
<li>Improved gamut mapping to reduce unnecessary changes to less
saturated colors such as skin tones.</li>
<li>Add support for DataColor Spyder 5.</li>
<li>Add support for ColorHug2 colorimeter.</li>
<li>Add support for Klein K10-A colorimeter.</li>
<li>Added Google ChromeCast as a test patch generator for Video
displays.</li>
<li>Added ls2ti3 tool to convert LightSpace .bcs files to .ti3.</li>
<li>Added IRIDAS .cube 3DLut format support to collink.</li>
<li>Add X3D and X3DOM support as an alternative to VRML, and make
X3DOM the default.</li>
<li>Add better cross compatibility with non-Argyll ICC profiles
using ArgyllCMS 'arts' tag to mark 'wtpt' Absolute Colorimetric
chromaticity transform, as well as implement proper absolute
colorimetric intent for Display profiles use the 'chad' tag.
Note that the standard ICC profiles provided by ArgyllCMS in the
ref directory (such as sRGB etc.) now include an 'arts' tag.</li>
<li>Ignore any patches that have zero values for creating Display
profiles, unless they are for device zero. </li>
<li>Fix various instrument communications problems for JETI
specbos, DTP20, DTP92 & DTP94.</li>
<li>Fix gestaltSystemVersion warning on OS X 10.10.</li>
<li>Fix very major bug in illumread. It wasn't actually working at
all since V1.4.0.</li>
<li>Added collink -I[gG][:p.p]:x.x options that allows an output
offset gamma curve be targetted instead of BT1886.</li>
<li>Added dispcal and collink -b black point hack. This forces the
input zero to map to the output zero for well behaved displays,
reducing dependence on the instrument accuracy for a very dark
black point.</li>
<li>Added preset list of display techologies to select from in
ccxxmake.</li>
<li>Added a -P prune option to profcheck, that creates a .ti3 file
pruned of any patches that have a delta E fit error greater than
a threshold. This may be of use in eliminating bad reading
values from a measurement set.</li>
<li>Added histogram plot option -h to both profcheck and verify.</li>
<li>Added a dispread & fakeread -Z option to set the number of
bits to quantize the test values to. </li>
<li>Fixed bug in targen - the -V dark emphasis wasn't being
applied to OFPS generated points.</li>
<li>Make sure that if an instrument display reading is interrupted
by a forced calibration, that the user is asked to place it back
on the display before resuming the measurements.</li>
</ul>
<h1>[V1.6.2 -> V1.6.3] 26th January 2014</h1>
<ul>
<li>Added ProPhoto.icm and ProPhotoLin.icm to ref profiles.</li>
<li>Fix bug in xicclu -py conversion.</li>
<li>Added code to minimize ICC rounding error on matrix profile
white point accuracy. Re-generated all reference profiles with
this change.</li>
<li>Changed i1d3 driver to completely ignore any EEPROM checksum
errors for non "A-01" rev. instruments.</li>
<li>Made transplot handle RGB->RGB device link.</li>
<li>Removed colprof -y option. Use "profcheck -v2" instead, as it
is more developed.</li>
<li>Fixed bug in dispcal - it was not using the final measurement
pass to update the calibration curves.</li>
<li>Fixed bug in spotread, dispcal & dispread for CCSS capable
instruments where refresh display types was being ignored if a
custom observer was used, and/or the custom observer as being
ignored, and/or a CCMX was being ignored. Changed instlib
semantics for inst_opt_set_ccss_obs :- this is now set
immediately, and applied also to any subsequent set_disptype()
or col_cal_spec_set().</li>
<li>Renamed verify to colverify to avoid clash with MSWin program
of the same name. Made it print the patch location for -v2 if it
is present in the file.</li>
<li>Changed targen to ensure that -V and -p options effects are
reflected in the resulting expected CIE values of the .ti1 file.</li>
<li>Changed targen so that -V parameter also affects single
channel, grey wedge, grid & body centered grid point
distribution.</li>
<li>Changed colprof to deal with variable grid distribution in a
more neuanced way, to reduce overshoot artifacts when the -V
parameter is used.</li>
<li>Changed colprof to used a power_like function for the grid
distribution shape from the -V parameter, so as to avoid issues
with a power curve infinte slope near zero.</li>
<li>Changed colprof to used a scaled down value of the targen -V
parameter as the default for its -V parameter. Documentation now
recommends more moderate values for -V.</li>
<li>Added a special case to collink for RGB video input encoding
to (attempt) to fine tune the black point to compensate for it
(probably) not falling on a cLUT grid point. & out encoding</li>
<li>Tweaked dispcal to try and improve accuracy of black point
calibration.</li>
<li>Switch dispread to use NoClamp readings, so that average black
point value is not biased.</li>
<li>Fixed bug introduced into 1.6.2 oeminst that prevents .ccss
files being installed.<br>
</li>
</ul>
<h1>[V1.6.1 -> V1.6.2] 18th November 2013</h1>
<ul>
<li> Added "dark region emphasis" -V parameter to targen and
colprof, in an attempt to improve the accuracy of display
profiles intended for use with video. This should improve the
subsequent black point accuracy of the profile.</li>
<li>Fixed bug and tweaked dispcal black point optimization to err
on the black side. Added -v3 for even more debugging
information.</li>
<li>Changed i1d3 driver to be more forgiving of EEProm checksum
calculation, so that it works with the latest release "A-02"
rev. i1 display pro & colormunki display instruments,
as well as improving its robustness in the face of errors.</li>
<li>Fixed race condition bug in OS X HID driver. This fixes
occassional problem with i1d3, and also solves problem with the
ColorHug on OS X. </li>
<li>Fixed problem with TV encoded output and dispread -E -k/-K.</li>
<li>Fixed minor bug in DE94 in icclib.</li>
<li>Fixed major bug in illumread - result was being corrupted.</li>
<li>Fixed "edges don't match" bug in printarg when -iCM -h -s/-S
used.</li>
<li>Fix bug in -H flag in ccxxmake, chartread, dispcal, dispread,
illumread & spotread so that it works once again.</li>
<li> <br>
</li>
</ul>
<h1>[V1.6.0 -> V1.6.1] 30th September 2013</h1>
<ul>
<li>Fix bug in "average -m"<br>
</li>
<li>Fix oeminst to work with a wider range of i1d3 install files.</li>
<li>Fix ColorMunki reflective measurement accuracy, particularly
for reflective readings. This has been poor since V1.5</li>
<li>Fix bug in using DTP94 on Apple OS X introduced in V1.5</li>
<li>Fix MadVR connect code to look for appropriate 32 bit or 64
bit .dll.</li>
<li>Improve MSWin system driver installation by creating valid
ArgyllCMS.cat file to match ArgyllCMS.inf. This eliminates the
need to "Disable Driver Signature Enforcement", as well as
allowing installation on MSWin 8.1.<br>
</li>
</ul>
<h1>[V1.5.1 -> V1.6.0] 16th August 2013</h1>
<ul>
<li>Added support for <b>JETI</b> specbos 1211 and 1201 (Thanks
to JETI for their support!)</li>
<li>Added Video profiling & 3dLut creation support for eeColor
and MadVR. See video section in tutorial for pointers to
relevant changes to tools. This includes support for MadTPG +
various Video standard ICC profiles + verification workflow.<br>
</li>
<li>Linux profile installation will use <b>colord</b> if
libcolordcompat.so is present on system.</li>
<li>Fix <b>ColorHug</b> driver so that it is backwards compatible
with FW 1.1.8</li>
<li>Made sure that MSWin test colors are not color managed. This
may affect Vista, Win7 and Win8.</li>
<li>Changed spectro/dispwin.c so that null transform color
matching is used for displaying test patches on OS X >= 10.6.
This should fix calibrating/profiling secondary displays on >
OS X 10.6. Note that the 32 bit 10.4 binary will still have
problems on > OS X 10.6.</li>
<li>Changed <b>instlib API</b> ambient XYZ and spectral units to
Lux. In previous versions of instlib they were Lux/pi.</li>
<li>For those instruments that support it, made ambient readings
honor refresh mode measurements, to improve repeatability when
measuring regularly flickering light sources. (specbos, i1d3,
i1disp).</li>
<li>Changed spotread -ew mode to be Bradford chromatic transform
rather than XYZ scaling, to better match Argyll ICC abs. vs.
rel.</li>
<li>Added support to xicclu to lookup colors though CAL files,
both forward and backwards. Will also plot CAL file contents
using -g.</li>
<li>Added -Y R:rate option to spotread, dispcal, dispread &
ccxxmake to allow setting a chosen display refresh rate. This
can be used with the Colormunki display, as well as situations
in which refresh rate measurement is not reliable.</li>
<li>By default printtarg will create PS and EPS files with a CUPS
job ticket to disable color management. Use the -U flag to
disable this.</li>
<li>Added display update delay calibration support to i1pro and
ColorMunki (just like i1disp3), to improve measurement times.</li>
<li>Changed dispcal & dispread so that they wait up to 0.5
seconds when reading dark patches after light ones to allow for
display fall time. Added patch order optimization for
display patch sets in targen to minimize the extra time.</li>
<li>Changed dispwin daemon loader mode option from -E to -X. Added
-E option to encode test patch colors in Video 16-235 range.</li>
<li>Changed dispcal verify option from -E to -z. Added -E option
to encode test patch colors in Video 16-235 range.</li>
<li>Added -E option to to dispread to encode test patch colors in
Video 16-235 range.</li>
<li>Changed CIECAM02 Flare model to distinguish between Flare from
the image itself, and Glare from ambient light. This allows
scaling Glare with ambient automatically. Changed enumerated
viewing conditions for new Flare/Glare settings, changed all to
Flareless to improve dark image behavior, while retaining Glare
modelling. Tweaked brightness and ambient values.</li>
<li>Improved i1pro hi-res mode to improve accuracy.</li>
<li>Added Body Centered Cubic grid option to targen.</li>
<li>Added -Yn flag to dispcal and dispread, which skips asking the
user to place the instrument on the measuring spot.</li>
<li>Improve robustness of i1d3 display update measurement code.</li>
<li>Added support for applying calibration curves in collink.</li>
<li>Changed spotread so that it won't fall back to emissive spot
mode if an ambient reading is requested.</li>
<li>Turned off B2A table clip map smoothing, as it seems to
introduce reversals for some data sets, and provides little
benefit.</li>
<li>Fixed crash in ucmm/ucmm.c when loading certain profiles using
dispwin (thanks to Torok Edwin).</li>
<li>Fixed gamut mapping intent "rl" to really use relative L*a*b*</li>
<li>Fix bug in cicam02 in V1.5.0 that causes some mapping problems
in the red for collink -ir or -ila. </li>
<li>Changed cctiff so that it does lossless JPEG copy when there
is no color transformation. This makes it more useful for
embedding a profile.</li>
<li>Fix xicclu so that it works with device links.</li>
<li>Fixed bug in shaper/matrix profile curves that caused random
bumpy black behaviour (shaper curve optimization local minimum
problem).</li>
<li>Don't add colorant tag to .tiff files in cctiff unless it is a
non-standard space, as Photoshop will barf on such files.</li>
<li>Fix bug with Spyder not being able to break out of dispcal
adjustment loop.</li>
<li>Fix bug in xicc/xicclu, -K flag not being recognised.</li>
<li>Fix bug in xicc/xmatrix.c introduced in V1.5 that prevents
matrix only profiles from being created.</li>
<li>libusb 1.0 is now deprecated in favor of native USB drivers.<br>
</li>
</ul>
<h1>[V1.5.0 -> V1.5.1] 8th March 2013</h1>
<ul>
<li>Fix spectro/instlib.ksh and standalone instlib build.</li>
<li>Turned off debug plot on using FWA.</li>
<li>Changed link $(LINKFLAGS) location in link command line
Jambase to get latest gcc working.</li>
<li>Fixed new bug in matrix display profile creation that causes
an inaccurate relative white point. This causes Photoshop to
barf on the profiles.</li>
<li>Added -m option to printcal.</li>
<li>Fix bug in webwin that causes crash.<br>
</li>
</ul>
<h1>[V1.4.0 -> V1.5.0] 1st March 2013</h1>
<ul>
<li>Increased ease of selecting ISO 13655:2009 M0, M1 and M2
measurements using FWA comensation using any spectrometer that
can take non-UV filtered measurements. M0, M1 or M2 can now be
selected directly using the -f flag. [ArgyllCMS has been
supporting ISO 13655 M0, M1 & M2 well before the standard
was created, thanks to its FWA compensation feature.]<br>
</li>
<li>Increased stability of i1d3 refresh display measurements by
increasing integration time, and tweaking crossover from
frequency to period measurement.</li>
<li>Added i1pro Rev E (i1pro2) feature support. Uses RevE
measurement mode, and does wavelength calibration. Uses RevE
(internal) stray light reduction, and black level temperature
compensation. The only Rev E feature not currently supported is
U.V. measurement, which would improve the accuracy of FWA
compensation. Rev E driver can be disabled and the legacy driver
mode used by setting the ARGYLL_DISABLE_I1PRO2_DRIVER
environment variable.</li>
<li>Changed i1pro adaptive mode to avoid high gain mode, so as to
give more consistent and longer integration times for low light
levels.</li>
<li>Changed ColorMunki adaptive mode to avoid high gain mode, so
as to give more consistent and longer integration times for low
levels. Added black level temperature compensation.</li>
<li>Added spotread interactive function 'f' to read out the
calibrate display refresh rate for instruments that have a
refresh display mode, as well as an 'F' function that measures
the refresh rate for instruments that support a refresh rate
measurement function (colorimeters & spectrometers).</li>
<li>The Display Type selection option -y in dispcal, dispread,
chartread, spotread & ccxxmake now lists installed CCSS and
CCMX files as a selection, rather than using the -X parameter.
CCMX and CCSS files now have extra fields to indicate the
refresh mode, an optional list of default UI selection
characters, and (for CCMX files) the base display type they
apply over (CB-n).<br>
</li>
<li>Tweaked CIECAM02 to improve behavior for extreme blue colors,
so that the hue doesn't swing too far towards the cyan. This
helps in the clipping behavior from colorspaces such as
ProPhotoRGB.</li>
<li>Made the input profile cLUT extra neutral axis extrapolation
points the default for colprof -u and non -u profiles. Changed
-u algorithm to work similarly to -U scale :- it sets the scale
automatically. Relative colorimetric is therefore hue matched to
the white reference patch, Removed colprof -un, as it seems
unnecessary. Added colprof -uc, which clips cLUT colors over Y =
1 to white.</li>
<li>The spyd2en, spyd4en and i1d3ccss tools have been combined
into, and replaced by a single oeminst tool.</li>
<li>Fix problem with dispwin/dispcal/dispread -dweb and the latest
Safari browser.</li>
<li>Changed to a single ArgyllCMS.inf file for MSWin USB driver
installation. This eases installation of more than a single type
of instrument. Tested on MS Windows 8 and updated installation
instructions.</li>
<li>Dropped libusb for USB access, using native USB access
instead. MSWin uses the libusb-win32 kernel driver. Moved the
usb setup files from libusb1 to a new directory, usb.</li>
<li>Added scanin support for ColorCheckerPassort.</li>
<li>Updated OS X code to compile on 10.6 and 10.7 and (presumably)
10.8 (64 bit compatible API used when compiling on those
platforms, including Cocoa for the test patch window).<br>
</li>
<li>Changed udev file usb/55-Argyll.rules to eliminate the test
for /lib/udev/udev-acl as a condition of using ACL_MANAGE, since
I'm informed that it is deprecated in recent distribution
releases (but who can tell, given the churn in the udev API).</li>
<li>Deprecated -V flag (adaptive mode) in dispcal, dispread and
ccxxmake, since this is now the default. Flag will be ignored
with a warning. Added -ZA flag instead, to select non-adaptive
integration time mode.</li>
<li>spotread -d flag is deprecated, and is now a synonym for the
-e flag, since it defaults to adaptive mode. Added -ZA flag
instead, to select non-adaptive integration time mode. Also
added -Zr and -ZR flags to allow testing of the refresh mode
overrides.</li>
<li>Migrated ArgyllCMS specific application runtime files (such as
instrument blobs, calibration state & calibration files) to
an "ArgyllCMS" sub-directory rather than the generic "color"
directory. On OS X also moved data files to below the
"Application Support" sub directory. The old locations will be
used as a fallback.<br>
</li>
<li>Added support for Quato Silver Haze 3 OEM i1d3<br>
</li>
<li>Added support for X-Rite ColorMunki Smile colorimeter.</li>
<li>Enable the ColorHug by default, although it isn't advertised
as supported, since it doesn't yet work reliably on OS X.
Updated ColorHug PCI VID & PID</li>
<li>For Spyder, emit a warning rather than error if the feature
bits are missing for calibration tables.</li>
<li>Added automatic adjustment of patch reading delay for i1d3, so
that a more conservative (longer) default value (200 msec) can
be used without impacting i1d3 speed. Also added environment
variable ARGYLL_MIN_DISPLAY_UPDATE_DELAY_MS that can set a
different minimum update delay.</li>
<li>Fixed a bug introduced in V1.3.6 that stops the dtp41 from
being initialized properly.</li>
<li>Improved black level readings derived from spectral values by
allowing them to be -ve. <br>
</li>
<li>The instlib API has been modified quite extensively to make it
more self contained and flexible, although the basic
architecture remains the same.<br>
</li>
</ul>
<h1>[V1.3.7 -> V1.4.0] 20th April 2012</h1>
<ul>
<li>Modified spectro/ccxxmake so that a colorimeter can be used as
a reference to make ccmx files if two .ti3 files are used. Added
ref/ccxx.ti1 as convenient way of creating ccmx .ti3 files.<br>
</li>
<li>Added dither/screening support for 8 bit output of render, and
then made it available in target/printtarg.<br>
</li>
<li>Added JPEG file support to imdi/cctiff, xicc/tiffgamut and
xicc/extracticc. ICC profiles embedded in JPEG files can now be
used anywhere a TIFF file with embedded ICC profile can be used
as a source of an ICC profile.<br>
</li>
<li>Fixed memory leaks in usbio.c, xdg_bds.c & conv.c</li>
<li>Fixed double memory free bug in icc/icc.c when iccdump'ing a
profile that has a duplicate tag.</li>
<li>Changed license of xicc/ccmx.[ch] to GPL2+.<br>
</li>
<li>Made display calibration and profile making deal with displays
without hardware calibration support (VideoLUT support) more
graceful. Added tutorial section covering this.<br>
</li>
<li>Added option to dispwin/dispcal/dispread/ccxxmake to redirect
the test patches to a web browser via a local web server. This
augments Argyll's existing local and remote display capability.<br>
</li>
<li>Fixed bug in spectro/i1d3.c which results in NAN if a low
level readings drops to zero at a particular time. Improved
refresh rate calibration accuracy. Fixed bugs in adaptive
measurement logic that caused a channel to be pre-measured when
it shouldn't. This seems to noticeably improve repeatability on
refresh displays.<br>
</li>
<li>Fixed bug in ucmm/jcnf where it was failing to locate the
correct profile for a display.<br>
</li>
<li>Fix bugs in ColorMunki Transmissive measurement mode
calibration.<br>
</li>
</ul>
<h1>[V1.3.6 -> V1.3.7] 26th March 2012</h1>
<ul>
<li>Fix regression in Spyder support - ccmx files were not being
handled (bug introduced in 1.3.6).</li>
<li>Fix packaging problem - Spyder4 MSWin .inf file was missing.</li>
<li>Change dispwin so that it will install a profile when there is
no access to the display VideoLUT if the profile has no vcgt.<br>
</li>
</ul>
<h1>[V1.3.5 -> V1.3.6] 19th March 2012<br>
</h1>
<ul>
<li>Added Spyder4 support. Note the need for spyd4en for access to
a full range of Manufacturers calibrations. The Spyder4 can use
.ccss calibration files too. Speeded up all Spyder instrument
readings on brighter colors.</li>
<li>Experimental ColorHug support is compiled in, but is disabled
unless the environment variable "ENABLE_COLORHUG" is set. The
ColorHug currently doesn't seem to work reliably across all
platforms ArgyllCMS supports.<br>
</li>
<li>Changed and expanded display selection (-y flag) to be
instrument specific. This is to support the Spyder4 and
ColorHug, and adds a refresh display selection to the i1d3.</li>
<li>Tweaked i1d3 integration times and added accurate refresh
period calibration to the refresh display mode. Refresh display
measurement times are double non-refresh displays. Improved i1d3
period measurement logic to improve measurement speed and
accuracy for dark colors.</li>
<li>Changed i1disp measurement logic to try and make it more
robust against light to dark changes during a reading. This may
make it slightly less precise for LCD displays on bright colors
(equivalent now to Refresh display precision).<br>
</li>
<li>Added a -V option to spotread to allow tracking reading
consistency.</li>
<li>Changed ccxxmake to create default .ccss with just RGBW,
and not to weight W. This may give better matching. Made
corresponding change to CCMX, giving the white patch 1/4
weighting of sum of all other patches.</li>
<li>Fixed applycal so that it applies calibration to both A2B and
B2A tables, to preserve softproofing.</li>
<li>Fixed timeout in SpectroScanT reference transmission
measurement. (Someone kindly donated me a SpectroScanT to test
with!)</li>
<li>Made DTP94 driver ignore with a warning any
NEEDS_OFFSET_DRIFT_CAL_ERR after a full reset. It seems that
occasionally a few instruments do this, and X-Rite don't appear
to be prepared to treat this as an instrument fault.</li>
<li>Added support for Datacolor SpyderCheckr (Thanks to Jos
Pereira).</li>
<li>Improved the ability of spyd2en to cope with slightly
different setup.exe formats.</li>
<li>Add support for NEC SpectraSensor Pro version of the i1d3.<br>
</li>
</ul>
<h1>[V1.3.4 -> V1.3.5] 24th October 2011</h1>
<ul>
<li>Fix bug (crash) that affects ColorMunki design/photo display
measurement. This also stops it restoring a calibration (-N
flag).</li>
<li>Add support for the OEM version of the i1d3.</li>
<li>Fix bug that stopped ccxxmake being able to make ccmx's.</li>
<li>Tweak gamut mapping to improve dark area mapping,
non-monotonic profile inversion, and contrast preservation to
small gamut.</li>
<li>Kill i1ProfileTray.exe process if unable to open i1d3 on
MSWin.</li>
<li>Fix DTP20 chart printing - TID was sometimes incomplete. This
shows up on a 4x6 chart.<br>
</li>
</ul>
<h1>[V1.3.3 -> V1.3.4] 31st August 2011</h1>
<ul>
<li>Added support for the X-Rite i1 Display Pro and ColorMunki
Display colorimeters. As part of this, added support for CCSS
calibration files for the instruments and added CCSS support to
ccxxmake (renamed from ccmxmake). Provide new tool i1d3ccss to
translating and installing CCSS files as well as the
manufacturers calibration files for these instruments. Added
non-default observer support for these instruments too.</li>
<li>Fix gamut code to ignore setting primary/secondary cusps that
are unlikely to be true. This avoids buggy gamut mapping
behavior for gamuts that are very small and odd shaped.</li>
<li>Changed Linux USB code to avoid doing a
set_configuration if possible, since the USB driver does
this by default. This then avoids triggering a bug in the
Spyder2, which allows it to work on Linux version without the
reset_ep fix, and may also allow the Spyder to work better with
USB hubs.</li>
<li>Change printtarg for DTP20 to allow for variable patch size.</li>
<li>Changed dummy display matrix table to have channels rotated
rather than R & G swapped, to make it more obvious.</li>
<li>Added option to colprof to allow setting the default profile
rendering intent.</li>
<li>Enhanced spectro/fakeread so that it will process a .ti3 file
that has been renamed to .ti1.</li>
<li>Fix bug in matrix input profile white point selection, + add
in slight neutral bias code used in clut profiles.</li>
<li>New profcheck -I wasn't working - fix option parsing.</li>
</ul>
<h1>[V1.3.2 -> V1.3.3] 13th May 2011</h1>
<ul>
</ul>
<ul>
<li>Fixed compiler dependant bug in Eye-One pro and (possibly)
Munki high res. spectral wavelength calculation.</li>
<li>Add support for install variables DESTDIR and PREFIX in
Jamtop. These can be set on the command line using "jam -s"</li>
<li>Added targen -N parameter to allow adjustment of neutral axis
patch density emphasis, as well as increasing the default. This
should improve the result without needing to add explicit grey
test patches.</li>
<li>Added spectro/instlib.ksh script to assemble all the files
needed for a standalone instrument library. Changed licence to
GPLv2 for the files included in the instlib.zip file that is
thus created. See spectro/instlib.txt for more details.</li>
<li>Fix Jambase so that recent MingW compilers don't need extra
.dll's</li>
<li>Change Linux serial code to test ports using O_NONBLOCK</li>
<li>Modify xspect & illumread to improve realism of UV
spectrum estimation.</li>
<li>Fixed profile/txt2ti3 so that a sample name that looks like an
integer is treated as text. (Fixes problem with latest
ProfileMaker file).</li>
<li>Added LCh option to spotread.</li>
<li>Fixed numerical issue in scanin/scanrd.c, where large input
rasters would cause fitting to fail.</li>
<li>Modified colprof input chart white patch detection to slightly
favour patches that are close to D50 neutral.</li>
<li>Increase the default XYZ PCS A2B profile default smoothness.</li>
<li>Improved cLUT input -u black & white point
extrapolation.</li>
<li>Improved black point determination for devices that have
extremely narrow gamuts doe to the use of custom inks.</li>
<li>Added -Z option to colprof, to allow setting ICC attribute
flags.</li>
<li>Fix CIECAM02 to better match forward and backwards, to fix
perceptual table white point.</li>
<li>Add code to override X-Rite's new OS X drivers for ColorMunki
and EyeOne. Note new installation instructions
<http://www.argyllcms.com/doc/Installing_OSX.html>.</li>
<li>Added -R flag to colprof, which restricts the range of the
white, black for better compatibility with other programs.</li>
<li>Fixed typo bug that prevented flash measurement mode from
working.</li>
<li>Replaced spectro/average with a new version that is more
general.</li>
<li>Fixed bug in printcal not working with spectral only files.</li>
<li>Added extra verbose output to printcal in which it computes an
ideal power-like value to apply to the test chart values in
targen.</li>
<li>Modify the way that XYZ cLUT B2A tables are indexed, so that
the white point is at the top corner of the grid.This should
solve Photoshop CS4/CS5 complaining that XYZ LUT profiles are
'defective'.</li>
<li>Added option in xicc/xicclu to plot an arbitrary slice.</li>
<li>Expand the number of i1 Display OEM devices that can be used.</li>
<li>Made some changes to help compile on FreeBSD.</li>
<li>Added another intent, "pa", Perceptual Appearance, which is
the same as perceptual except that the grey axes are not forced
into alignment, allowing the appearance parameters to have full
affect, including altering the chromatic mapping.</li>
<li>Fixed bug in txt2ti3 - it wasn't creating an iRGB colorspace
file for output device RGB files, causing warnings warnings and
failures when mixed with other iRGB tool sequences. </li>
<li>Added pathological case fix for target/ofps where the ink
limit == di-2. </li>
<li>targen was failing to proceed when fixed points happened to be
numerically just over the total ink limit.</li>
<li>Added more navigation options for chartread patch by patch
mode.</li>
<li> Fixed bug in "chartread -r -H" that caused resume of
i1Pro high res to fail with "The resumed spectral type seems to
have changed".</li>
<li>Modified profcheck so that it prints patch location if it is
present in the .ti3 file.</li>
<li>Changed dispcal and dispread -K option to -J. Added -K option
to dispcal as an alternate way of profiling a calibrated
display, and also added a -K option to dispcal. </li>
<li>Increased ColorMunki emissive auto scaling target "over"
margin from 5% to 10% to allow more room for instrument drift
during measurement.</li>
<li> Fix bug in winusb + i1Display, where dark CRT
measurements timeout.</li>
</ul>
<h1>[V1.3.1 -> V1.3.2] 4th November 2010<br>
</h1>
<ul>
<li>Turn off debugging that was accidentally left on in FWA code.
Add gcc 3.3 PPC optimizer bug workaround to FWA code in
xicc/xspect.c</li>
<li>Change shaper/matrix profile back to using power curve as 0th
order shape. Improve it with input & output offsets and
straight segment at zero. Make cLUT input -u black & white
point extrapolation use pure shaper curves with special tweaks.</li>
<li>Increase dispcal native white target weighting from 10 to 50
to encourage white to be device 1.0,1.0,1.0 more strongly.</li>
</ul>
<h1>[V1.3.0 -> V1.3.1] 26th October 2010<br>
</h1>
<ul>
<li>Fixed MSWIN Vista/Win7 problem where having Task Manager
running would stop display test window updating. Also fixed plot
library to avoid the same problem.</li>
<li>Swapped dispwin -E and -D flags, to make -D debug consistent
throughout tools.</li>
<li>Changed the ARGYLL_NOT_INTERACTIVE mode so that all return and
line feed characters are ignored, so that they can be used
freely to flush stdin without triggering anything.</li>
<li>Fixed endless loop problem with chartread -r -p on fully read
chart.</li>
<li>Added -S option to chartread, that suppresses wrong strip and
unexpected value warnings.</li>
<li>Fix dispcal and spotread so that color temperature takes into
account any non-standard observer (ie. the color temperature is
the closest point on the spectrum locus as determined by the
chosen observers interpretation of the Plancian or daylight
spectrum.)</li>
<li>Fix bug in libusb1 triggered on systems that support bulk
continuation (Linux)</li>
<li>Added 1964_10c observer to spectro/dispcal, to better allow
comparison to the default numbers.</li>
<li>Added recognition for Huey built into Lenovo W series Laptops.</li>
<li>Fixed chartread/dispsup/spotread etc. so that -N isn't fatal
if the instrument doesn't support it.</li>
<li>Fixed dispcal to disable black & white drift tracking
during interactive adjustment.</li>
<li>Added -s option to ccmxmake to allow the number of test
patches to be set.</li>
</ul>
<h1>[V1.2.0 -> V1.3.0] 8th September 2010<br>
</h1>
<ul>
<li>Added option to <span style="font-weight: bold;">dispcal</span>
and dispread that attempts to counteract instrument black drift
and display white drift (-I option). This may help with
instruments that haven't properly acclimatised to the
measurement location, and LCD displays that also take some time
to stabilise. The is a short discussion <a
href="Scenarios.html#PM6">here</a>.<br>
</li>
<li>Added option to <span style="font-weight: bold;">dispcal</span>
to allow specifying a non 1931 2 degree observer if a
spectrometer is being used.<br>
</li>
<li>Added new utility spectro/<span style="font-weight: bold;">ccmxmake</span>,
which makes Colorimeter Correction Matrices for a particular
Colorimeter + Display combination, using a Spectrometer as a
reference. The resulting <span style="font-weight: bold;">.ccmx</span>
file can then be used with <span style="font-weight: bold;">spotread/dispcal/dispread</span>
(-X option) to improve the accuracy of the colorimeter on
that particular display. See a discussion <a
href="WideGamutColmters.html">here</a> and <a
href="Scenarios.html#PM6">here</a>.<br>
</li>
<li>Fixed bug in spotread's handling of emissive measurements. If
the XYZ was computed from spectral, it was using a D50 white
instead of no white reference.</li>
<li>Fixed bug in i1pro normal resolution wavelength calibration,
introduced in V1.2.0.<br>
</li>
<li>Changed libusb V1.0 name to libusb-1.0A, so as not to clash
with any official but different libusb V1.0 installation. [This
may necessitate re-installing device drivers on MSWin.]</li>
<li>Added support for HP DreamColor version of the i1 display.<br>
</li>
<li>Fix problem with ARGYLL_NOT_INTERACTIVE - reading from
instruments was not actually possible, because polling for input
was disabled.</li>
<li>Adjust ColorMunki dark threshold to reduce misread reports.
Add inconsistent data to debug output. Fix bug in adaptive mode
- the integration time was sometimes too short. Set
adaptive emissive target at 95% to allow a little more margin to
saturation.<br>
</li>
<li>Fix problem with ColorMunki reporting erroneous inconsistent
measurement errors. This shows up on display calibration.</li>
<li>Fix some minor compiler warnings.</li>
<li>Added direction indicators to xy values in dispcal
interactive monitor adjustments. </li>
<li>Fix bug in CIECAM02 viewing condition settings :- the
enumerated conditions after "mt" are displaced by 1. (ie. "mt"
is really "pc", "mb" is "mt", "md" is "mb" etc.) Added option
-c:sn for auto surround from the Lv parameter (-c:l).</li>
<li>Add option to illumread to average several readings. Fixed bug
in the way illumread displays available instruments.<br>
</li>
</ul>
<h1>[V1.1.1 -> V1.2.0] 30 July 2010<br>
</h1>
<ul>
<li>Re-worked gamut mapping to improve perceptual intent
saturation levels, as well as improve highlight and shadow
contrast. Added fine tuning to improve both smoothness and the
precision with which the source is mapped to the destination.</li>
<li>Added illumread, which allows measuring an illuminant and
estimating its UV content, for better accuracy with FWA
compensation.</li>
<li>Use a modified/forked version of libusb V1.0, that supports
Win2K (libusb0.sys) back end by default. Supports 64 but MSWin
using a combination of WinUSB.sys and ptlibusb0.sys. [ The HCFR
does not work on Win 64 bit though, due to its buggy USB
implementation. ] NOTE that the included version of Libusb V1
has been carefully tested with all supported instruments on all
supported platforms, and includes many bug fixes needed
for correct functioning. While bug fixes have been fed upstream,
not all have been adopted. In particular there is a nasty race
condition that has not, and may never be fixed upstream, as well
as missing critical functionality (clearep()).<br>
</li>
<li>Modified colprof -p to allow different abstract profiles to be
applied for each intent.</li>
<li>Added -I option (imitation) to printcal, so that an existing
devices response can be set as a target.</li>
<li>Increase target/ofps.c vertex intersection retries from 10 to
40 to give it a better chance of working with difficult
profiles.</li>
<li>Fixed bug in plot that shows up on XP+, where the window isn't
dismissed by the first keystroke, but only after it has been
moved or resized.</li>
<li>Changed CMYK black point to be natural, rather than the
darkest point in the same direction and K only. This may wreck K
only to black point matching, but it will stop printers with
funny colored K ink from messing up the black point.</li>
<li>Make Lacie Blue Eye colorimeter appear as an i1display.</li>
<li>Improved i1pro matching to Original Manufacturers Driver (see
doc/i1proDriver.html).</li>
<li>Improved i1pro/ColorMunki patch recognition for better
uniformity.</li>
<li>Fixed bug in ColorMunki driver scan mode calibration when
instrument is more sensitive than usual.</li>
<li>Added EV calculation to spotread -a<br>
</li>
</ul>
<h1>[V1.1.0 -> V1.1.1] 21 February 2010<br>
</h1>
<ul>
<li>Renamed the following tools:<br>
cb2cgats ->
cb2ti3<br>
kodak2cgats -> kodak2ti3<br>
logo2cgats -> txt2ti3<br>
splitcgats
-> splitti3<br>
mpprof ->
mppprof<br>
</li>
<li>Modified black curve to make sure that smoothed curve meets
target level at boundaries.</li>
<li>Added -M option to printtarg, for the case where the TIFF file
is to include the margin.</li>
<li>Fixed several build bugs in imdi code related to 64 bits.</li>
<li>Fixed profile/colprof -u so that it is applied to matrix
profiles too</li>
<li>Changed tiffgamut to use one pass gamut hull finding and
modified the smoothing so as to end up with a more closely
wrapped volume.</li>
<li>Fixed bug in input matrix profiles introduced by the XYZ cLUT
display matrix profile change, where the correct white and black
point weren't being written.</li>
<li>Added matrix only/linear algorithm option to profile/colprof,
for raw camera profiling.</li>
<li>Modified libusb/55-Argyll.rules for better compatibility with
systems that have ACL installed but no ConsoleKit. Also set
ID_VENDOR and ID_MODEL using. usb-db.</li>
<li>Modified target/targen to cope better with case where adding
nodes fails to determine vertex positions a lot of the time,
causing extreme slowdown.</li>
<li>Fixed colprof so that the per channel input curves for XYZ PCS
B2A tables are actually scaled correctly.</li>
<li>Changed link/collink to apply Y to L* curve if the input or
output space is XYZ. Fixed the Y to L* scaling to make sure it
only apples to XYZ space, and that the L* non-linearisation
still applies to Y like device spaces.</li>
<li>Modified scanin so that it ignores any alpha channels in the
input .tiff file.</li>
<li>Changed printcal so that it will create .AMP file with more
than 4 channels. Also fixed up plotting to plot up to 10
channels.</li>
<li>Changed dispcal and dispread so that a request for projector
mode falls back to display mode if the instrument doesn't
support a projector mode.</li>
<li>Updated ref/CMP_Digital_Target-3.cht as it seems that the
reference chart has columns labelled "2A - 2D" rather than the
"AA - AD" that is actually printed on the chart...</li>
<li>Altered xpsect FWA code to reduce overshoot artefacts due to
filtering.<br>
</li>
</ul>
<h1>[V1.0.4 -> V1.1.0] 17th January 2010<br>
</h1>
<ul>
<li>Spyder3 and ColorMunki Design, Photo and Create instrument
support.</li>
<li>Added a complete printer calibration system. This can work
either with a print system that supports per channel print
calibration curves, or purely using ICC profiling mechanisms.</li>
<li>Default targen (OFPS) test point distribution has been
re-written to generate test points on the gamut surface, refine
the point locations when using a guide profile, and use a better
error estimate model to determine the test point locations. <br>
</li>
<li>Changed chartread strip reading mode to allow navigating about
the strips, saving a partially read chart, and resuming a
partially read chart.<br>
</li>
<li>Improved and re-tuned gamut mapping. This is noticeably
smoother and better retains source image detail.</li>
<li>Re-tuned the cLUT profile creation smoothness vs. accuracy.</li>
<li>Fixed viewgam so that the number of gamuts that can be viewed
is unlimited. Also added error when computing intersecting
volume if the two gamuts are incompatible.</li>
<li>Improved CMYK black generation control and smoothness near the
black point.</li>
<li>Improved collink special black and colorant handling so that
the gamut mapping is consistent with the special black and
colorant mapping</li>
<li>Changed profile/colprof to generate matrix tags for Display
XYZ PCS cLUT profiles, to improve compatibility with other CMMs.<br>
By default (-ax) the matrix tags will be a dummy transform that
swaps red and green, while using -aX will create real matrix
tags.</li>
<li>Added -V option to dispcal and dispread to allow use of i1pro
adaptive mode to give better low level consistency.</li>
<li>Changed dispcal to default to -f 1.0 (assume black is all
output offset) to make it work in more sympathy to a typical
display response. Also changed default gamma to 2.4 for OS X
10.6 systems.<br>
</li>
<li>Improved X11 XRandR CRTC detection.</li>
<li>Added spotread option to save spectral reading of an
illuminant to a .sp file.</li>
<li>Added Color Rendering Index (Ra) to spotread measurement
results.</li>
<li>Added i1pro & ColorMunki flash measurement
support. <br>
</li>
<li>Improve reliability of detecting backwards read i1pro/Munki
strips.</li>
<li>Fixed bug in i1pro driver that subtly affected accuracy.</li>
<li>Modified xicc/cam02 to clip the blue to avoid crazy behavior
outside the spectrum locus.</li>
<li>Simplified the Linux installation instructions, particularly
with regard to USB and serial permissions.</li>
<li>Added working MSWindows 64 bit libusb drivers, which will work
on Vista 64 and MSWindows 7 64 bit. Because of Microsoft's
driver signing requirements though, they won't be usable unless
a driver code signing workaround is used.</li>
<li>Changed printtarg so that the TIFF output has the paper margin
subtracted from it. This is so that the resulting TIFF can be
placed on that sized paper without clipping or scaling. Set the
margin to zero to get a TIFF that exactly fits into the
specified paper size</li>
</ul>
<h1>[V1.0.3 -> V1.0.4] 30th June 2009<br>
</h1>
<ul>
<li>Modify icc/icclib to protect against integer overflow
exploits, and fixes to minor bugs. Bump icclib version to 2.11
to reflect this.<br>
</li>
<li>Fix bug in spectro/hidio.c that can cause a crash (bus error)
on OS X for any program that accesses the instruments.</li>
<li>Fix bug in xicc/xfit.c where too little memory was being
allocated.<br>
</li>
</ul>
<h1>[V1.0.2 -> V1.0.3] 3rd September 2008<br>
</h1>
<ul>
<li>Added multi-TIFF and popularity filtering to <span
style="font-weight: bold;">tiffgamut</span>.<br>
</li>
<li>Modified gamut mapping in <span style="font-weight: bold;">colprof</span>
and <span style="font-weight: bold;">collink</span> to be
consistent, and have higher perceptual intent saturation.<br>
</li>
<li>Fixed timeout problem with the Eye-One Display colorimeter.<br>
</li>
<li>Fix segmentation fault in <span style="font-weight: bold;">dispread</span>.</li>
<li>Fix out of memory error in <span style="font-weight: bold;">colprof
</span>for systems with > 3Gig Ram.</li>
<li>Add support for the Eye-One Monitor spectrometer.</li>
<li>Added -L option to <span style="font-weight: bold;">printtarg</span>
to suppress the i1pro target holder clip margin.<br>
</li>
<li>Fixed bug in <span style="font-weight: bold;">dispcal</span>
when using -a with -t<br>
</li>
</ul>
<h1>[V1.0.1 -> V1.0.2] 19th August 2008<br>
</h1>
Various bug fixes, the main ones being:<br>
<ul>
<li>Fixed some <span style="font-weight: bold;">colprof </span>performance
and memory usage issues.</li>
<li>Fixed issues with Eye-One Pro Rev B timeouts.</li>
<li>Added new option to collink -fk, that forces 000K input to K
only output.</li>
<li>Added device target value quantization option to <span
style="font-weight: bold;">printtarg</span>, as well as making
it default for TIFF output files.put files.</li>
<li>Fixed leak that was affecting <span style="font-weight:
bold;">printtarg</span>.<br>
</li>
</ul>
<h1>[V0.70 Beta 8 -> V1.0.0] 1st July 2008<br>
</h1>
<br>
Apart from numerous bug fixes and many minor feature additions and
improvements, the main changes to this version compared to the
previous one are:<br>
<ul>
<li>Speedup in profile and device link generation (inversion
code), and better memory usage.<br>
</li>
<li>Support for embedded profiles in TIFF files.</li>
<li>Support for installing and uninstalling and loading of display
profiles for all operating systems, and a micro CMM system for
X11/Linux<br>
</li>
<li>Improved display calibration and profiling, including ambient
light adjustment.</li>
<li>X11 XRandR 1.2 support added.</li>
<li>Raster test charts now supported, as well as PS and EPS.<br>
</li>
<li>Guidance for installing on a wider range of systems.</li>
<li>Fixed luminance and ambient calibration issues with various
instruments.</li>
<li>Renamed "profile" to "colprof", and "icclink" to "collink" to
avoid clashes that have arisen with other executable names.</li>
<li>Streamlined source code build system, for much easier
building.<br>
</li>
<li>Installation archives now include a top directory, and
gzip/tar format for OS X and Linux.</li>
<li>Added B2A table to input device LUT profiles by default.<br>
</li>
</ul>
As usual, a more detailed description of all changes is in the <b>log.txt</b>
file that accompanies the source code.
<h1>[V0.60 -> V0.70 Beta 8]15th January 2008<br>
</h1>
<ul>
<li>Added quick display ICC profile creation as part of
calibration.</li>
<li>Added support for the Huey, Spyder 2, DTP20, Eye-One Pro,
DTP22/Digital Swatchbook, Eye-One Display 1 and 2 instruments.</li>
<li>Changed to GPL Version 3 license.</li>
<li>Countless other bug fixes and feature enhancements.<br>
</li>
</ul>
<br>
<br>
<br>
<p><br>
<br>
<br>
<br>
<br>
<br>
</p>
<br>
</body>
</html>
|
