1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1215
1216
1217
1218
1219
1220
1221
1222
1223
1224
1225
1226
1227
1228
1229
1230
1231
1232
1233
1234
1235
1236
1237
1238
1239
1240
1241
1242
1243
1244
1245
1246
1247
1248
1249
1250
1251
1252
1253
1254
1255
1256
1257
1258
1259
1260
1261
1262
1263
1264
1265
1266
1267
1268
1269
1270
1271
1272
1273
1274
1275
1276
1277
1278
1279
1280
1281
1282
1283
1284
1285
1286
1287
1288
1289
1290
1291
1292
1293
1294
1295
1296
1297
1298
1299
1300
1301
1302
1303
1304
1305
1306
1307
1308
1309
1310
1311
1312
1313
1314
1315
1316
1317
1318
1319
1320
1321
1322
1323
1324
1325
1326
1327
1328
1329
1330
1331
1332
1333
1334
1335
1336
1337
1338
1339
1340
1341
1342
1343
1344
1345
1346
1347
1348
1349
1350
1351
1352
1353
1354
1355
1356
1357
1358
1359
1360
1361
1362
1363
1364
1365
1366
1367
1368
1369
1370
1371
1372
1373
1374
1375
1376
1377
1378
1379
1380
1381
1382
1383
1384
1385
1386
1387
1388
1389
1390
1391
1392
1393
1394
1395
1396
1397
1398
1399
1400
1401
1402
1403
1404
1405
1406
1407
1408
1409
1410
1411
1412
1413
1414
1415
1416
1417
1418
1419
1420
1421
1422
1423
1424
1425
1426
1427
1428
1429
1430
1431
1432
1433
1434
1435
1436
1437
1438
1439
1440
1441
1442
1443
1444
1445
1446
1447
1448
1449
1450
1451
1452
1453
1454
1455
1456
1457
1458
1459
1460
1461
1462
1463
1464
1465
1466
1467
1468
1469
1470
1471
1472
1473
1474
1475
1476
1477
1478
1479
1480
1481
1482
1483
1484
1485
1486
1487
1488
1489
1490
1491
1492
1493
1494
1495
1496
1497
1498
1499
1500
1501
1502
1503
1504
1505
1506
1507
1508
1509
1510
1511
1512
1513
1514
1515
1516
1517
1518
1519
1520
1521
1522
1523
1524
1525
1526
1527
1528
1529
1530
1531
1532
1533
1534
1535
1536
1537
1538
1539
1540
1541
1542
1543
1544
1545
1546
1547
1548
1549
1550
1551
1552
1553
1554
1555
1556
1557
1558
1559
1560
1561
1562
1563
1564
1565
1566
1567
1568
1569
1570
1571
1572
1573
1574
1575
1576
1577
1578
1579
1580
1581
1582
1583
1584
1585
1586
1587
1588
1589
1590
1591
1592
1593
1594
1595
1596
1597
1598
1599
1600
1601
1602
1603
1604
1605
1606
1607
1608
1609
1610
1611
1612
1613
1614
1615
1616
1617
1618
1619
1620
1621
1622
1623
1624
1625
1626
1627
1628
1629
1630
1631
1632
1633
1634
1635
1636
1637
1638
1639
1640
1641
1642
1643
1644
1645
1646
1647
1648
1649
1650
1651
1652
1653
1654
1655
1656
1657
1658
1659
1660
1661
1662
1663
1664
1665
1666
1667
1668
1669
1670
1671
1672
1673
1674
1675
1676
1677
1678
1679
1680
1681
1682
1683
1684
1685
1686
1687
1688
1689
1690
1691
1692
1693
1694
1695
1696
1697
1698
1699
1700
1701
1702
1703
1704
1705
1706
1707
1708
1709
1710
1711
1712
1713
1714
1715
1716
1717
1718
1719
1720
1721
1722
1723
1724
1725
1726
1727
1728
1729
1730
1731
1732
1733
1734
1735
1736
1737
1738
1739
1740
1741
1742
1743
1744
1745
1746
1747
1748
1749
1750
1751
1752
1753
1754
1755
1756
1757
1758
1759
1760
1761
1762
1763
1764
1765
1766
1767
1768
1769
1770
1771
1772
1773
1774
1775
1776
1777
1778
1779
1780
1781
1782
1783
1784
1785
1786
1787
1788
1789
1790
1791
1792
|
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<title>dispread</title>
<meta http-equiv="content-type" content="text/html;
charset=windows-1252">
<meta name="author" content="Graeme Gill">
</head>
<body>
<h2><b>spectro/dispread</b> </h2>
<h3>Summary</h3>
Display test patches on a monitor, read the colorimetric value
result with the colorimeter, and create the chart readings file. The
type of instrument is determined by the communication port selected.
Emission and display measurement instruments are supported.<br>
<br>
If you want to read a display manually rather than automatically,
see <a href="chartread.html">chartread</a> and the <a
href="chartread.html#d">-d</a> option.<br>
<h3>Usage</h3>
<small style="font-family: monospace;">dispread [-options]<i>
inoutfile</i><br>
<a href="#v">-v</a>
Verbose mode<br>
</small><font size="-1"><a style="font-family: monospace;"
href="#display">-display displayname</a><span
style="font-family: monospace;"> [X11 only] Choose X11 display
name<br>
</span></font><font size="-1"><span style="font-family:
monospace;"> <a href="#dnm">-d n[,m]</a>
[X11 only]Choose the display from the following list (default
1),<br>
and
optionally
choose
a
different
display
m
for VideoLUT access.</span></font><br>
<font size="-1"><span style="font-family: monospace;"> <a
href="#d">-d n</a>
Choose
the
display
from
the
following
list
(default 1)</span></font><small style="font-family: monospace;"><br>
</small><span style="font-family: monospace;"> <a href="#dweb">-dweb[:port]</a>
Display via a web server at port (default 8080)</span><br>
<span style="font-family: monospace;"> <a href="#dmadvr">-dmadvr</a>
[MSWin] Display via MadVR Video Renderer</span><br>
<tt> </tt><tt><a href="#dcc">-dcc[:n]</a>
</tt><tt>Display via n'th ChromeCast (default 1, ? for list)</tt><br>
<small style="font-family: monospace;"> <span style="font-family:
monospace;"> </span><a style="font-family: monospace;"
href="#c">-c listno</a><span style="font-family: monospace;">
Set
communication port from the following list (default 1)<br>
</span></small><font size="-1"><span style="font-family:
monospace;"> <a href="#p">-p</a>
Use telephoto mode (ie. for a projector) (if available)</span></font><br>
<font size="-1"><span style="font-family: monospace;"><a
href="#y">-y X</a>
Display
type - instrument specific list to choose from.</span></font><br>
<small style="font-family: monospace;"> <span
style="text-decoration: underline;">-</span><a href="#k">k
file.cal</a>
Load calibration file into display while reading<br>
</small><small style="font-family: monospace;"> <span
style="text-decoration: underline;">-</span><a href="#K">K
file.cal</a>
Apply
calibration file to test values while reading</small><br>
<tt> <a href="#V">-V</a>
[MSWin] Enable MadVR color management (3dLut)</tt><br>
<small style="font-family: monospace;"> <a href="#s">-s</a>
Save spectral information (default don't
save)<br>
</small><font style="font-family: monospace;" size="-1"> <a
href="#P">-P ho,vo,ss[,vs]</a> Position
test window and scale it<br>
ho,vi:
0.0
=
left/top,
0.5
=
center,
1.0 = right/bottom etc.<br>
ss:
0.5
=
half,
1.0
=
normal,
2.0 = double etc.<br>
</font><font size="-1"><span style="font-family: monospace;">
ss,vs: = optional horizontal, vertical scale.</span></font><br>
<font style="font-family: monospace;" size="-1"> </font><font
size="-1"><span style="font-family: monospace;"><a href="#F">-F</a>
Fill whole screen with black background</span></font><br>
<font size="-1"><span style="font-family: monospace;"> </span></font><font
size="-1"><span style="font-family: monospace;"><a href="#E">-E</a>
</span></font><small><span style="font-family: monospace;">Video
encode output as (16-235)/255 "TV" levels</span></small><br>
<font size="-1"><span style="font-family: monospace;"> </span></font><font
size="-1"><span style="font-family: monospace;"><a href="#Z">-Z
nbits</a>
</span></font><small><span style="font-family: monospace;">Quantize
test
values
to
fit
in nbits</span></small><br style="font-family: monospace;">
<small style="font-family: monospace;"> <span
style="text-decoration: underline;"></span><a href="#n">-n</a>
[X11
only]
Don't
set
override
redirect
on test window<br>
</small><small style="font-family: monospace;"> <a href="#J">-J</a>
Run calibration first</small><br>
<font size="-1"><span style="font-family: monospace;"> <a
href="#N">-N</a>
Disable initial calibration of instrument if possible<br>
</span></font><font size="-1"><span style="font-family:
monospace;"> </span><a style="font-family: monospace;"
href="#H">-H</a><span style="font-family: monospace;">
Use high resolution spectrum mode (if
available)</span></font><font size="-1"><span
style="font-family: monospace;"></span><span style="font-family:
monospace;"><br>
<a href="#w">-w</a>
Disable
normalisation
of
white
to
Y
=
100</span></font><small><span style="font-family: monospace;"></span></small><br>
<font size="-1"><span style="font-family: monospace;"><a
href="#X1">-X file.ccmx</a>
Apply Colorimeter Correction Matrix</span></font><br>
<span style="font-family: monospace;"> <a href="#X2">-X
file.ccss</a>
Use
Colorimeter
Calibration
Spectral Samples for calibration</span><font size="-1"><span
style="font-family: monospace;"><br>
</span></font><small><span style="font-family: monospace;"> </span><a
style="font-family: monospace;" href="#Q">-Q <i>observ</i></a><span
style="font-family: monospace;">
Choose CIE Observer for spectrometer or CCSS
colorimeter data:</span><br style="font-family: monospace;">
<span style="font-family: monospace;">
1931_2 </span></small><small><span
style="font-family: monospace;">(def.)</span></small><small><span
style="font-family: monospace;">, 1964_10, </span></small><small><span
style="font-family: monospace;"><tt><small>2012_2, 2012_10, </small></tt>S&B
1955_2, shaw, J&V 1978_2, 1964_10c or file.cmf</span></small><br>
<small><span style="font-family: monospace;"> <a
href="dispread.html#I">-I b|w</a>
Drift
compensation,
Black:
-Ib,
White:
-Iw,
Both:
-Ibw</span></small><br>
<small><span style="font-family: monospace;"><tt> <a href="#YR">-Y
R:<i>rate</i></a>
Override measured refresh rate with rate Hz<br>
</tt> </span></small><font size="-1"><span
style="font-family: monospace;"></span><a style=" font-family:
monospace;" href="#YA">-<font size="-1">Y</font> A</a><span
style="font-family: monospace;">
Use non-adaptive integration time mode (if available).</span></font><br>
<font size="-1"><span style="font-family: monospace;"> </span><a
style=" font-family: monospace;" href="#Yp">-<font size="-1">Y</font>
<font size="-1">p</font></a><span style="font-family:
monospace;">
Don't wait for the instrument to be placed on
the display</span></font><br>
<font size="-1"><span style="font-family: monospace;"> </span><a
style="font-family: monospace;" href="#C">-C "command"</a><span
style="font-family: monospace;">
Invoke shell
"command" each time a color is set<br>
</span></font><font size="-1"><span style="font-family:
monospace;"> </span><a style="font-family: monospace;"
href="#M">-M "command"</a><span style="font-family: monospace;">
Invoke shell
"command" each time a color is measured</span></font><br>
<small> <a style="font-family: monospace;" href="#x">-x x</a><span
style="font-family: monospace;">
Take
manually entered XYZ values</span></small><br>
<font size="-1"><span style="font-family: monospace;"> <a
href="#W">-W n|h|x</a>
Override
serial
port
flow
control:
n
=
none, h = HW, x = Xon/Xoff</span></font><br>
<small style="font-family: monospace;"> <a href="#D">-D [level]</a>
Print debug
diagnostics to stderr</small><br>
<small style="font-family: monospace;"> <a href="#p1"><i>inoutfile</i></a>
Base name for input[<a href="File_Formats.html#.ti1">.ti1</a>]/output[<a
href="File_Formats.html#.ti3">.ti3</a>] file.<br>
</small> <br>
<b>Examples</b><br>
<br>
dispread -c1 -i92 mycrt<br>
<h3>Comments<br>
</h3>
This is the tool for exercising a display, in order to measure its
color characteristics. The device test colors are defined by the
outfile.ti1 file, while the resulting device+colorimetric and
optional spectral readings are stored in the outfile.ti3 file.
Display calibration curves can be applied during the measurements,
and the curves included in the resulting .ti3 data file using the <span
style="font-weight: bold;">-k</span>flag. See <a
href="dispcal.html">dispcal</a> for information on how to
calibrate the display before profiling it. For best results, you
should run this against a neutral grey desktop background, and avoid
having any bright images or windows on the screen at the time you
run it.<br>
<br>
<a name="v"></a> The <b>-v</b> flag reports progress information.<br>
<br>
<a name="display"></a><span style="font-weight: bold;">-display</span>:
When running on a UNIX based system that used the X11 Windowing
System, <b>dispread</b> will by default use the $DISPLAY
environment variable to determine which display and screen to read
from. This can be overridden by supplying an X11 display name to the
<span style="font-weight: bold;">-display</span> option. Note that
if Xinerama is active, you can't select the screen using $DISPLAY or
-display, you have to select it using the <span style="font-weight:
bold;">-d</span> parameter.<br>
<br>
<a name="d"></a> <span style="font-weight: bold;">-d</span>: By
default the main display will be the location of the test window. If
the system has more than one display or screen, an alternate
display/screen can be selected with the <span style="font-weight:
bold;">-d</span> parameter. If you invoke <span
style="font-weight: bold;">dispread</span> so as to display the
usage information (i.e. "dispread -?" or "dispread --"), then the
discovered displays/screens will be listed. Multiple displays may
not be listed, if they appear as a single display to the operating
system (ie. the multi-display support is hidden in the video card
driver). On UNIX based system that used the X11 Windowing System,
the <span style="font-weight: bold;">-d</span> parameter will
override the screen specified by the $DISPLAY or <span
style="font-weight: bold;">-display</span> parameter.<br>
<br>
On X11 the inability to access VideoLUTs could be because you are
trying to access a remote display, and the remote display doesn't
support the XF86VidMode extension, or perhaps you are running
multiple monitors using NVidia TwinView, or MergedFB, and trying to
access anything other than the primary monitor. TwinView and
MergedFB don't properly support the XF86VidMode extension for
multiple displays. You can use <a href="dispwin.html#r">dispwin -r</a>
to test whether the VideoLUTs are accessible for a particular
display. See also below, on how to select a different display for
VideoLUT access. Also note that dispcal will fail if the Visual
depth doesn't match the VideoLUT depth. Typically the VideoLUTs have
256 entries per color component, so the Visual generally needs to be
24 bits, 8 bits per color component.<br>
<br>
<a name="dnm"></a>Because of the difficulty cause by TwinView and
MergedFB in X11 based systems, you can optionally specify a separate
display number after the display that is going to be used to present
test patches, for accessing the VideoLUT hardware. This must be
specified as a single string, e.g. <span style="font-weight: bold;">-d
1,2</span> . Some experimentation may be needed using <a
href="dispwin.html">dispwin</a> on such systems, to discover what
screen has access to the VideoLUT hardware, and which screens the
test patches appear on. You may be able to calibrate one screen, and
then share the calibration with another screen. Profiling can be
done independently to calibration.<br>
<br>
<a name="dweb"></a><span style="font-weight: bold;">-dweb</span> or
<span style="font-weight: bold;">-dweb:port</span> starts a
standalone web server on your machine, which then allows a local or
remote web browser to display the the color test patches. By default
port <span style="font-weight: bold;">8080</span> is used, but this
can be overridden by appending a <span style="font-weight: bold;">:</span>
and the port number i.e. <span style="font-weight: bold;">-dweb:8001</span>.
The URL will be <span style="font-weight: bold;">http://</span>
then name of the machine or its I.P. address followed by a colon and
the port number - e.g something like <span style="font-weight:
bold;">http://192.168.0.1:8080</span>. If you use the verbose
option (<span style="font-weight: bold;">-v</span>) then a likely
URL will be printed once the server is started, or you could run <span
style="font-weight: bold;">ipconfig</span> (MSWin) or <span
style="font-weight: bold;">/sbin/ifconfig</span> (Linux or OS X)
and identify an internet address for your machine that way. <b>
JavaScript</b> needs to be enabled in your web browser for this to
work. You may have to modify any firewall to permit port 8080 to be
accessed on your machine.<br>
<br>
Note that if you use this method of displaying test patches, that
there is no access to the display VideoLUTs and that the colors will
be displayed with 8 bit per component precision, and any
screen-saver or power-saver will not be disabled. You will also be
at the mercy of any color management applied by the web browser, and
may have to carefully review and configure such color management.
See the <a href="dispcal.html#o">-o</a> flag for an explanation of
the implications of having no access to the VideoLUTs.<br>
<br>
<a name="dmadvr"></a><span style="font-weight: bold;">-dmadvr</span>
[MSWin only] causes test patches to be displayed using the MadVR
video renderer. Note that will have to start <b>MadTPG</b> before
running dispread, and that while you can adjust the "Test Pattern
Configuration" controls, you should <u>not</u> normally alter the
"Existing Calibration" controls, as dispread will set these
appropriately. See also <tt><a href="dispread.html#V">-V</a> flag.</tt><br>
<br>
<a name="dcc"></a><span style="font-weight: bold;">-dcc</span> or <b>-dcc:<i>no</i></b>
causes test patches to be displayed using and available <a
href="http://en.wikipedia.org/wiki/Chromecast">ChromeCast</a> to
your TV. Use <b>-dcc:?</b> to display a list of ChromeCasts on your
local network. Note that the ChromeCast as a test patch source is
probably the<b> least accurate</b> of your choices, since it
up-samples the test patch and transforms from RGB to YCC and back,
but should be accurate within ± 1 bit. You may have to modify any
firewall to permit port 8081 to be accessed on your machine if it
falls back to the Default receiver (see <a href="Installing.html">installation
instructions</a> for your platform).<br>
<br>
<a name="c"></a> <span style="font-weight: bold;">-c</span>: The
instrument is assumed to communicate through a USB or serial
communication port, and the port can be selected with the <b>-c</b>
option, if the instrument is not connected to the first port. If you
invoke <span style="font-weight: bold;">dispread</span> so as to
display the usage information (i.e. "dispread -?" or "dispread --"),
then the discovered USB and serial ports will be listed. On
UNIX/Linux, a list of all possible serial ports are shown, but not
all of them may actually be present on your system.<br>
<br>
<a name="p"></a>The <span style="font-weight: bold;">-p</span> flag
allows measuring in telephoto mode, using instruments that support
this mode, e.g. the ColorMunki. Telephoto mode is one for taking
emissive measurements from a distance (ie. telespectometer,
tele-colorimeter) mode, and typically would be used for measuring
projector type displays. If a device does not support a specific
telephoto mode, then the normal emissive mode may be suitable for
measuring projectors.<br>
<br>
<a name="y"></a>The <span style="font-weight: bold;">-y</span> flag
allows setting the Display Type. The selection typically determines
two aspects of of the instrument operation: <span
style="font-weight: bold;">1)</span> It may set the measuring mode
to suite <a
href="http://en.wikipedia.org/wiki/Comparison_of_display_technology"><span
style="font-weight: bold;">refresh</span> or <span
style="font-weight: bold;">non-refresh</span> displays</a>.
Typically only LCD (Liquid Crystal) displays have a non-refresh
nature. <span style="font-weight: bold;">2)</span> It may select an
instrument calibration matrix suitable for a particular display
type. The selections available depends on the type and model of
instrument, and a list of the options for the discovered instruments
will be shown in the <a href="ArgyllDoc.html#CmdLine">usage</a>
information. For more details on what particular instruments support
and how this works, see <a href="instruments.html">Operation of
particular instruments</a>. <b>3)</b> Any installed CCSS files
(if applicable), or CCMX files. These files are typically created
using <a href="ccxxmake.html">ccxxmake</a>, and installed using <a
href="oeminst.html">oeminst</a>. The default and Base Calibration
types will be indicated in the usage.<br>
<br>
<a name="s"></a><span style="font-weight: bold;">-s</span>: By
default only the colorimetric information (XYZ value) will be saved,
but for instruments that support spectral readings (such as the
Gretag Spectrolino), the <b>-s</b> option will save the spectral
readings to the .ti3 file as well.<br>
<br>
<a name="k"></a> <span style="font-weight: bold;">-k: </span>If a
display video lookup table calibration <a
href="File_Formats.html#.cal">.cal</a> file is provided, it will
be loaded into the display <span style="font-weight: bold;">VideoLUTs</span>
while the measurements are being taken, thereby being applied to the
measurement values, and the calibration will also included in the
resulting .ti3 data file, so that <a href="colprof.html">colprof</a>
can include it as a <span style="font-weight: bold;">vcgt</span>
tag in the resulting profile. This is the <span style="font-weight:
bold;">normal</span> way to profile a calibrated display. The
calibration file has usually been created using <a
href="dispcal.html">dispcal</a>. If the calibration file indicates
that the displays VideoLUTs are not accessible, or if they prove not
to be accessible, then dispread will switch to <span
style="font-weight: bold;">-K</span> mode (see below). If a
calibration file is not supplied using <b>-k</b> or <b>-K</b>,
then the display will be measured in whatever calibration state it
is in, and no calibration information is saved to the resulting .ti3
file.<br>
If the calibration file provided created using video range encoding
(dispcal -E), then the <b>-E</b> option in dispread will be
triggered automatically.<br>
<span style="font-weight: bold;">NOTE</span> that the calibration is
loaded into the display hardware just before the instrument starts
measurement, after the test window first appears.<br>
<br>
<a name="K"></a> <span style="font-weight: bold;">-K: </span>If a
display video lookup table calibration <a
href="File_Formats.html#.cal">.cal</a> file is provided, it will
be applied to the test values for each measurement, and also
included in the resulting .ti3 data file, so that <a
href="colprof.html">colprof</a> can include it as a <span
style="font-weight: bold;">vcgt</span> tag in the resulting
profile. This is <span style="font-weight: bold;">NOT</span>
normally the best way to profile a calibrated display, since the
frame buffer may have lower precision than the VideoLUTs output
values. This is the way calibration should be applied if MadVR is
being used to display the test patches. If a calibration file is not
supplied using <b>-k</b> or <b>-K</b>, then the display will be
measured in whatever calibration state it is in, and no calibration
information is saved to the resulting .ti3 file.<br>
If the calibration file provided created using video range encoding
(dispcal -E), then the <b>-E</b> option in dispread will be
triggered automatically.<br>
<br>
<a name="V"></a><b>-V:</b> [MSWin] If using MadVR to display test
patches, then enable Color Managenent (3dLut). This would be used
for verification measurement.<br>
<br>
<a name="P"></a> The <span style="font-weight: bold;">-P</span>
parameter allows you to position and size the test patch window. By
default it is places in the center of the screen, and sized
appropriately for the type of instrument, or 10% of the width of the
display if the display size is unknown. The <span
style="font-weight: bold;">ho</span> and <span
style="font-weight: bold;">vo</span> values govern the horizontal
and vertical offset respectively. A value of 0.0 positions the
window to the far left or top of the screen, a value of 0.5
positions it in the center of the screen (the default), and 1.0
positions it to the far right or bottom of the screen. If three
parameters are provided, then the <span style="font-weight: bold;">ss</span>
parameter is a scale factor for the test window size. A value of 0.5
for instance, would produce a half sized window. A value of 2.0 will
produce a double size window. If four parameters are provided, then
the last two set independent horizontal and vertical scaling
factors. Note that the ho,vo,ss or ho,vo,hs,vs numbers must be
specified as a single string (no space between the numbers and the
comma). For example, to create a double sized test window at the top
right of the screen, use <span style="font-weight: bold;">-P 1,0,2</span>
. To create a window twice as wide as high: <span
style="font-weight: bold;">-P 1,0,2,1</span>.<br>
<br>
<a name="F"></a> The <span style="font-weight: bold;">-F</span>
flag causes the while screen behind the test window to be masked
with black. This can aid black accuracy when measuring CRT displays
or projectors.<br>
<br>
<a name="E"></a> The <span style="font-weight: bold;">-E</span>
flag causes the test values to be scaled to the Video RGB encoding
range of 16/255 to 235/255. If the calibration file provided using
the <b>-k</b> or <b>-K</b> flag was created using video range
encoding, then this option will be triggered automatically. This
will also set quantization of 8 bits (see -Z flag below). If your
video connection is better than 8 bits (ie. 10 or 12 bits), then you
may wish to raise this default.<br>
<br>
<a name="Z"></a> <b>-Z nbits </b>Normally the target device values
are floating point numbers that may get rounded and quantized in the
process of printing them or reproducing them on the display device.
If some of this quantization can be accounted for, it may improve
the accuracy of the resulting profile, and the <span
style="font-weight: bold;">Q</span> parameter allows this
quantization to be specified. The parameter is the number of binary
digits (bits) that the device values should be quantized to. An idea
of the number of bits of precision that makes its way to your
display can be obtained by using <a href="dispcal.html#R">dispcal
-R</a> If Video encoding is selected (see -E flag above), then 8
bits is selected by default. On systems using an VGA connection or
Display Port with a graphics card with VideoLUT entries with greater
than 8 bits depth, or if using the MadVR rendered with dithering,
then a higher bit depth is typically possible.<br>
<br>
<a name="n"></a><span style="font-weight: bold;">-n</span>: When
running on a UNIX based system that used the X11 Windowing System, <b>dispread</b>
normally selects the override redirect so that the test window will
appear above any other windows on the display. On some systems this
can interfere with window manager operation, and the <b>-n</b>
option turns this behaviour off.<br>
<br>
<a name="J"></a> The -<span style="font-weight: bold;">J</span>
option runs through the black and sensor relative calibration
routines for the Xrite DTP92 and DTP94 instrument, the black level
calibration for the Eye-One Display 1, and a CRT frequency
calibration for the Eye-One Display 2. For the black calibration the
instrument should be placed on an opaque, black surface, and any
stray light should be avoided by placing something opaque over the
instrument. If a Spectrolino is being used, then a white and black
calibration will always be performed before the instrument can be
placed on the display, unless the <a href="#N">-N</a> flag is used.
Generally it is not necessary to do a calibration every time an
instrument is used, just now and again. There is no point in
doing a CRT frequency calibration, as this will be done
automatically at the commencement of patch reading.<br>
<br>
<a name="N"></a> <span style="font-weight: bold;">-N</span> Any
instrument that requires regular calibration will ask for
calibration on initial start-up. Sometimes this can be awkward if
the instrument is being mounted in some sort of measuring jig, or
annoying if several sets of readings are being taken in quick
succession. The -<span style="font-weight: bold;">N</span>
suppresses this initial calibration if a valid and not timed out
previous calibration is recorded in the instrument or on the host
computer. It is advisable to only use this option on the second and
subsequent measurements in a single session.<br>
<br>
<a name="H"></a> The -<span style="font-weight: bold;">H</span>
option turns on high resolution spectral mode, if the instrument
supports it. See <a href="instruments.html">Operation of particular
instruments</a> for more details. This may give better accuracy
for display measurements.<br>
<br>
<a name="w"></a>The <b>-w</b> flag disables the normalisation of
the white patch value to 100.0, resulting in values that are in
cd/m^2. This is mainly for diagnostic purposes.<br>
<br>
<a name="X1"></a> The -<span style="font-weight: bold;">X <span
style="font-style: italic;">file.ccmx</span></span> option reads
a <a href="File_Formats.html#.ccmx">Colorimeter Correction Matrix</a>
from the given file, and applies it to the colorimeter instruments
readings. This can improve a colorimeters accuracy for a particular
type of display. A list of contributed <span style="font-weight:
bold;">ccmx</span> files is <a href="ccmxs.html">here</a>.<br>
<br>
<a name="X2"></a> The -<span style="font-weight: bold;">X <span
style="font-style: italic;">file.ccss</span></span> option reads
a <a href="File_Formats.html#.ccss">Colorimeter Calibration
Spectral Sample</a> from the given file, and uses it to set the
colorimeter instruments calibration. This will only work with
colorimeters that rely on sensor spectral sensitivity calibration
information (ie. the X-Rite <span style="font-weight: bold;">i1d3</span>,
or the DataColor <span style="font-weight: bold;">Spyder4 &
Spyder 5</span>).This can improve a colorimeters accuracy for a
particular type of display. A list of contributed <span
style="font-weight: bold;">ccss</span> files is <a
href="ccsss.html">here</a>.<br>
<br>
<a name="Q"></a> The <b>-Q</b> flag allows specifying a tristimulus
observer, and is used to compute PCS (Profile Connection Space)
tristimulus values from spectral readings or using a colorimeter
that has CCSS capability. The following choices are available:<br>
<b> 1931_2</b> selects the standard CIE 1931 2 degree
observer. The default.<br>
<b>1964_10</b> selects the standard CIE 1964 10 degree
observer.<br>
<b> 2012_2</b> selects the proposed CIE 2012 2 degree observer<br>
<b>2012_10</b> selects the proposed CIE 2012 10 degree
observer<br>
<b>1955_2</b> selects the Stiles and Birch 1955 2 degree
observer<br>
<b>1978_2 </b>selects the Judd and Voss 1978 2 degree
observer<br>
<b>shaw</b> selects the Shaw and Fairchild 1997 2 degree
observer<br>
<b>1964_10c</b> selects a version of the CIE 1964 10 degree
observer that has been adjusted using a 3x3 matrix to better agree
with the 1931 2 degree observer.<br>
<i><b>file.cmf</b></i> selects an observer specified
by the given <a href="File_Formats.html#.cmf">.cmf</a> file.<br>
<br>
<span style="font-weight: bold;">NOTE</span> that if you select
anything other than the default 1931 2 degree observer, that the Y
values will not be cd/m^2, due to the Y curve not being the CIE 1924
photopic V(λ) luminosity function.<br>
<br>
<a name="I"></a> The -<span style="font-weight: bold;">I <span
style="font-style: italic;">b|w</span></span> options invoke
instrument black level, and display white level compensation
(respectively). Instrument black level drift compensation attempts
to combat instrument black calibration drift by using a display
black test patch as a reference. If an instrument is not
acclimatised sufficiently to the measurement conditions, changes in
temperature can affect the black readings. Display white level drift
compensation attempts to combat changes in display brightness as it
warms up by measuring a white patch every so often, and using it to
normalise all the other readings. If just instrument black drift
compensation is needed, use <span style="font-weight: bold;">-Ib</span>.
If just display white level compensation is needed, use <span
style="font-weight: bold;">-Iw</span>. If both are needed, use <span
style="font-weight: bold;">-Ibw</span> or <span
style="font-weight: bold;">-Iwb</span>.<br>
<br>
<a name="YR"></a> The -<span style="font-weight: bold;">Y R:<i>rate</i></span>
options overrides calibration of the instrument refresh rate. This
may be useful if the instrument supports this function and the
refresh rate cannot be accurately calibrated from the display
itself.<br>
<span style="font-weight: bold;"> <br>
</span><a name="YA"></a> The -<span style="font-weight: bold;">Y A</span>
option uses a non-adaptive integration time emission measurement
mode, if the instrument supports it, such as the Eye-One Pro,
ColorMunki, i1d3 and K10. By default an adaptive integration time
measurement mode will be used for emission measurements, but some
instruments support a fixed integration time mode that can be used
with display devices. This may give faster measurement times, but
may also give less accurate low level readings.<br>
<br>
<a name="Yp"></a> The -<span style="font-weight: bold;">Y p</span>
option skips asking the user to place the instrument on the display.
Normally a grey patch is displayed, and then the user is asked to
confirm that the instrument is in place, so that readings can
commence. This flag disables that check. This may be useful in
automating certain operations.<br>
<span style="font-weight: bold;"><br>
</span><a name="C"></a> The -<span style="font-weight: bold;">C</span>
<span style="font-weight: bold;">"command" </span>option allows a
method of relaying each test value to some other display than that
on the system running dispread (for instance, a photo frame, PDA
screen etc.), by causing the given command to be invoked to the
shell, with six arguments. The first three arguments are the RGB
test color as integers in the range 0 to 255, the second three
parameters are the RGB test color as floating point numbers in the
range 0.0 to 1.0. The script or tool should relay the given color to
the screen in some manner (e.g. by generating a raster file of the
given color and sending it to the display being profiled), before
returning. Note that a test window will also be created on the
system running dispread.<br>
<br>
<a name="M"></a> The -<span style="font-weight: bold;">M</span> <span
style="font-weight: bold;">"command" </span>option allows a
method of gathering each test value from some external source, such
as an instrument that is not directly supported by Argyll. The given
command is involked to the shell, with six arguments. The first
three arguments are the RGB test color as integers in the range 0 to
255, the second three parameters are the RGB test color as floating
point numbers in the range 0.0 to 1.0. The script or tool should
create a file called <span style="font-weight: bold;">"command.meas</span>"
that contains the XYZ values for the given RGB (or measured from the
test window) in cd/m^2 as three numbers separated by spaces, before
returning. If the command returns a non-zero return value, dispread
will abort. Note that a test window will also be created on the
system running dispread.<br>
<br>
<a name="x"></a> The <b>-x</b> flag causes dispread to expect
values to be manually entered for each reading, rather than using an
instrument to do the measurements. This mode is ideal if your
instrument is not supported by Argyll. XYZ values should be entered.
It is possible to navigate about the test values being measured, so
as to do them in any order, as well as re-do values, in case of any
mistakes.<br>
<br>
<a name="W"></a>The <b>-W</b> <span style="font-weight: bold;">n|h|x</span>
parameter overrides the default serial communications flow control
setting. The value <span style="font-weight: bold;">n</span> turns
all flow control off, <span style="font-weight: bold;">h</span>
sets hardware handshaking, and <span style="font-weight: bold;">x</span>
sets Xon/Xoff handshaking. This commend may be useful in workaround
serial communications issues with some systems and cables. <br>
<br>
<a name="D"></a>The <b>-D</b> flag causes communications and other
instrument diagnostics to be printed to stdout. A level can be set
between 1 .. 9, that may give progressively more verbose
information, depending on the instrument. This can be useful in
tracking down why an instrument can't connect.<br>
<br>
<a name="p1"></a> The final parameter on the command line is the
base filename for the <a href="File_Formats.html#.ti1">.ti1</a>
input file, and the <a href="File_Formats.html#.ti3">.ti3</a>
output file. <b>dispread</b> will add the .ti1 and .ti3 extensions
automatically.<br>
<br>
<span style="font-weight: bold;">NOTE</span> that on an X11 system,
if the environment variable <span style="font-weight: bold;">ARGYLL_IGNORE_XRANDR1_2</span>
is set (ie. set it to "yes"), then the presence of the XRandR 1.2
extension will be ignored, and other extensions such as Xinerama and
XF86VidMode extension will be used. This may be a way to work around
buggy XRandR 1.2 implementations.<br>
<br>
<hr style="width: 100%; height: 2px;"><br>
If a large number of patches is being read, the screensaver on many
systems can interfere with the operation of dispread. It is
therefore advisable in these cases to manually turn off the
screensaver before commencing the measurements.<br>
<br>
If communications break down with a USB connected instrument, you
may have to unplug it, and plug it in again to recover.<br>
<br>
Some systems (Apple OSX in particular) have a special set of user
interface controls ("Universal Access") that allows altering the
display in ways designed to assist visually impaired users, by
increasing contrast etc. This will interfere badly with any attempts
to calibrate or profile such a system, and must be turned off in
order to do so. Note that certain magic keyboard sequences can turn
this on by accident.<br>
<br>
<br>
<br>
</body>
</html>
|
