summaryrefslogtreecommitdiff
path: root/dmioem.c
diff options
context:
space:
mode:
Diffstat (limited to 'dmioem.c')
-rw-r--r--dmioem.c502
1 files changed, 498 insertions, 4 deletions
diff --git a/dmioem.c b/dmioem.c
index c26fff9..dc4b857 100644
--- a/dmioem.c
+++ b/dmioem.c
@@ -198,13 +198,14 @@ static void dmi_hp_240_attr(u64 defined, u64 set)
};
unsigned int i;
- pr_attr("Attributes Defined/Set", NULL);
+ pr_list_start("Attributes Defined/Set", NULL);
for (i = 0; i < ARRAY_SIZE(attributes); i++)
{
if (!(defined.l & (1UL << i)))
continue;
- pr_subattr(attributes[i], "%s", set.l & (1UL << i) ? "Yes" : "No");
+ pr_list_item("%s: %s", attributes[i], set.l & (1UL << i) ? "Yes" : "No");
}
+ pr_list_end();
}
static void dmi_hp_203_assoc_hndl(const char *fname, u16 num)
@@ -282,7 +283,7 @@ static void dmi_hp_203_devloc(const char *fname, unsigned int code)
"Rear USB Port",
"Internal USB",
"Internal SD Card",
- "Internal Virutal USB (Embedded NAND)",
+ "Internal Virtual USB (Embedded NAND)",
"Embedded SATA Port",
"Embedded Smart Array",
"PCI Slot",
@@ -299,6 +300,274 @@ static void dmi_hp_203_devloc(const char *fname, unsigned int code)
pr_attr(fname, "%s", str);
}
+static void dmi_hp_216_fw_type(u16 code)
+{
+ const char *str = "Reserved";
+ static const char * const type[] = {
+ "Reserved", /* 0x00 */
+ "System ROM",
+ "Redundant System ROM",
+ "System ROM Bootblock",
+ "Power Management Controller Firmware",
+ "Power Management Controller Firmware Bootloader",
+ "SL Chassis Firmware",
+ "SL Chassis Firmware Bootloader",
+ "Hardware PAL/CPLD",
+ "SPS Firmware (ME Firmware)",
+ "SL Chassis PAL/CPLD",
+ "Compatibility Support Module (CSM)",
+ "APML",
+ "Smart Storage Battery (Megacell) Firmware",
+ "Trusted Module (TPM or TCM) Firmware Version",
+ "NVMe Backplane Firmware",
+ "Intelligent Provisioning",
+ "SPI Descriptor Version",
+ "Innovation Engine Firmware (IE Firmware)",
+ "UMB Backplane Firmware",
+ "Reserved", /* 0x14 */
+ "Reserved",
+ "Reserved",
+ "Reserved",
+ "Reserved",
+ "Reserved",
+ "Reserved",
+ "Reserved",
+ "Reserved",
+ "Reserved",
+ "Reserved",
+ "Reserved", /* 0x1F */
+ "EL Chassis Abstraction Revision",
+ "EL Chassis Firmware Revision",
+ "EL Chassis PAL/CPLD",
+ "EL Cartride Abstraction Revision",
+ "Reserved", /* 0x24 */
+ "Reserved",
+ "Reserved",
+ "Reserved",
+ "Reserved",
+ "Reserved",
+ "Reserved",
+ "Reserved",
+ "Reserved",
+ "Reserved",
+ "Reserved",
+ "Reserved", /* 0x2F */
+ "Embedded Video Controller",
+ "PCIe Riser Programmable Logic Device",
+ "PCIe cards that contain a CPLD",
+ "Intel NVMe VROC",
+ "Intel SATA VROC",
+ "Intel SPS Firmware",
+ "Secondary System Programmable Logic Device",
+ "CPU MEZZ Programmable Logic Device", /* 0x37 */
+ "Intel Artic Sound -M Accelerator Models Firmware",
+ "Ampere System Control Processor (SCP – PMPro+SMPro)",
+ "Intel CFR information", /* 0x3A */
+ };
+
+ if (code < ARRAY_SIZE(type))
+ str = type[code];
+
+ pr_attr("Firmware Type", "%s", str);
+}
+
+static void dmi_hp_216_version(u8 format, u8 *data)
+{
+ const char * const name = "Version Data";
+ const char * const reserved = "Reserved";
+ int gen;
+
+ gen = dmi_hpegen(dmi_product);
+
+ switch (format) {
+ case 0:
+ pr_attr(name, "No Version Data");
+ break;
+ case 1:
+ pr_attr(name, "%c.%d.%d", data[0] & (1 << 7) ? 'B' : 'R',
+ data[0] & 0x7, data[1] & 0x7);
+ break;
+ case 2:
+ pr_attr(name, "%d.%d", data[0] >> 4, data[0] & 0x0f);
+ break;
+ case 4:
+ pr_attr(name, "%d.%d.%d", data[0] >> 4, data[0] & 0x0f, data[1] & 0x7f);
+ break;
+ case 5:
+ if (gen == G9) {
+ pr_attr(name, "%d.%d.%d", data[0] >> 4, data[0] & 0x0f, data[1] & 0x7f);
+ } else if (gen == G10 || gen == G10P) {
+ pr_attr(name, "%d.%d.%d.%d", data[1] & 0x0f, data[3] & 0x0f,
+ data[5] & 0x0f, data[6] & 0x0f);
+ } else {
+ pr_attr(name, "%s", reserved);
+ }
+ break;
+ case 6:
+ pr_attr(name, "%d.%d", data[1], data[0]);
+ break;
+ case 7:
+ pr_attr(name, "v%d.%.2d (%.2d/%.2d/%d)", data[0], data[1],
+ data[2], data[3], WORD(data + 4));
+ break;
+ case 8:
+ pr_attr(name, "%d.%d", WORD(data + 4), WORD(data));
+ break;
+ case 9:
+ pr_attr(name, "%d.%d.%d", data[0], data[1], WORD(data + 2));
+ break;
+ case 10:
+ pr_attr(name, "%d.%d.%d Build %d", data[0], data[1], data[2], data[3]);
+ break;
+ case 11:
+ pr_attr(name, "%d.%d %d", WORD(data + 2), WORD(data), DWORD(data + 4));
+ break;
+ case 12:
+ pr_attr(name, "%d.%d.%d.%d", WORD(data), WORD(data + 2),
+ WORD(data + 4), WORD(data + 6));
+ break;
+ case 13:
+ pr_attr(name, "%d", data[0]);
+ break;
+ case 14:
+ pr_attr(name, "%d.%d.%d.%d", data[0], data[1], data[2], data[3]);
+ break;
+ case 15:
+ pr_attr(name, "%d.%d.%d.%d (%.2d/%.2d/%d)",
+ WORD(data), WORD(data + 2), WORD(data + 4), WORD(data + 6),
+ data[8], data[9], WORD(data + 10));
+ break;
+ case 16:
+ pr_attr(name, "%c%c%c%c.%d%d",
+ data[0], data[1], data[2], data[3], data[4], data[5]);
+ break;
+ case 17:
+ pr_attr(name, "%08X", DWORD(data));
+ break;
+ case 18:
+ pr_attr(name, "%d.%2d", data[0], data[1]);
+ break;
+ case 3: /* fall through */
+ default:
+ pr_attr(name, "%s", reserved);
+ }
+}
+
+static int dmi_hp_224_status(u8 code)
+{
+ static const char * const present[] = {
+ "Not Present", /* 0x00 */
+ "Present/Enabled",
+ "Present/Disabled",
+ "Reserved" /* 0x03 */
+ };
+
+ pr_attr("Status", "%s", present[code & 0x03]);
+ if ((code & 0x03) == 0x00)
+ return 0;
+ pr_attr("Option ROM Measuring", "%s", (code & (1 << 2)) ? "Yes" : "No");
+ pr_attr("Hidden", "%s", (code & (1 << 3)) ? "Yes" : "No");
+ return 1;
+}
+
+static void dmi_hp_224_ex_status(u8 status, u8 code)
+{
+ const char *str = "Reserved";
+ static const char * const disable_reason[] = {
+ "Not Specified", /* 0x00 */
+ "User Disabled",
+ "Error Condition",
+ "Reserved" /* 0x03 */
+ };
+ static const char * const error_condition[] = {
+ "Not Specified", /* 0x00 */
+ "Self-Test", /* 0x01 */
+ };
+ if ((status & 0x03) == 0x02)
+ pr_attr("Disable Reason", "%s", disable_reason[code & 0x03]);
+ if ((code & 0x03) == 0x02) {
+ u8 error = (code >> 2) & 0x0f;
+ if (error < ARRAY_SIZE(error_condition))
+ str = error_condition[error];
+ pr_attr("Error Condition", "%s", str);
+ }
+}
+
+static void dmi_hp_224_module_type(u8 code)
+{
+ const char *str = "Reserved";
+ static const char * const type[] = {
+ "Not Specified", /* 0x00 */
+ "TPM 1.2",
+ "TPM 2.0",
+ "Intel PTT fTPM" /* 0x03 */
+ };
+ if ((code & 0x0f) < ARRAY_SIZE(type))
+ str = type[code & 0x0f];
+ pr_attr("Type", "%s", str);
+ pr_attr("Standard Algorithm Supported", "%s", (code & (1 << 4)) ? "Yes" : "No");
+ pr_attr("Chinese Algorithm Supported", "%s", (code & (1 << 5)) ? "Yes" : "No");
+}
+
+static void dmi_hp_224_module_attr(u8 code)
+{
+ static const char * const phys_attr[] = {
+ "Not Specified", /* 0x00 */
+ "Pluggable and Optional",
+ "Pluggable but Standard",
+ "Soldered Down on System Board" /* 0x03 */
+ };
+ static const char * const fips_attr[] = {
+ "Not Specified", /* 0x00 */
+ "Not FIPS Certified",
+ "FIPS Certified",
+ "Reserved" /* 0x03 */
+ };
+ pr_attr("Trusted Module Attributes", "%s", phys_attr[code & 0x3]);
+ pr_attr("FIPS Certification", "%s", fips_attr[((code >> 2) & 0x03)]);
+}
+
+static void dmi_hp_224_chipid(u16 code)
+{
+ const char *str = "Reserved";
+ static const char * const chipid[] = {
+ "None", /* 0x00 */
+ "STMicroGen10 TPM",
+ "Intel firmware TPM (PTT)",
+ "Nationz TPM",
+ "STMicroGen10 Plus TPM",
+ "STMicroGen11 TPM", /* 0x05 */
+ };
+ if ((code & 0xff) < ARRAY_SIZE(chipid))
+ str = chipid[code & 0xff];
+ pr_attr("Chip Identifier", "%s", str);
+}
+
+static void dmi_hp_230_method_bus_seg_addr(u8 code, u8 bus_seg, u8 addr)
+{
+ const char *str = "Reserved";
+ static const char * const method[] = {
+ "Not Available", /* 0x00 */
+ "IPMI I2C",
+ "iLO",
+ "Chassis Manager", /* 0x03 */
+ };
+ if (code < ARRAY_SIZE(method))
+ str = method[code];
+ pr_attr("Access Method", "%s", str);
+ if (code == 0 || code >= ARRAY_SIZE(method))
+ return;
+ if (bus_seg != 0xFF)
+ {
+ if (code == 2)
+ pr_attr("I2C Segment Number", "%d", bus_seg);
+ else
+ pr_attr("I2C Bus Number", "%d", bus_seg);
+ }
+ if (addr != 0xFF)
+ pr_attr("I2C Address", "0x%02x", addr >> 1);
+}
+
static void dmi_hp_238_loc(const char *fname, unsigned int code)
{
const char *str = "Reserved";
@@ -308,7 +577,7 @@ static void dmi_hp_238_loc(const char *fname, unsigned int code)
"Rear of Server",
"Embedded internal SD Card",
"iLO USB",
- "HP NAND Controller (USX 2065 or other)",
+ "USB Hub for NAND Controller",
"Reserved",
"Debug Port", /* 0x07 */
};
@@ -350,6 +619,52 @@ static void dmi_hp_238_speed(const char *fname, unsigned int code)
pr_attr(fname, "%s", str);
}
+static void dmi_hp_242_hdd_type(u8 code)
+{
+ const char *str = "Reserved";
+ static const char * const type[] = {
+ "Undetermined", /* 0x00 */
+ "NVMe SSD",
+ "SATA",
+ "SAS",
+ "SATA SSD",
+ "NVMe Manged by VROC/VMD", /* 0x05 */
+ };
+ if (code < ARRAY_SIZE(type))
+ str = type[code];
+
+ pr_attr("Hard Drive Type", "%s", str);
+}
+
+static void dmi_hp_242_form_factor(u8 code)
+{
+ const char *str = "Reserved";
+ static const char * const form[] = {
+ "Reserved", /* 0x00 */
+ "Reserved",
+ "3.5\" form factor",
+ "2.5\" form factor",
+ "1.8\" form factor",
+ "Less than 1.8\" form factor",
+ "mSATA",
+ "M.2",
+ "MicroSSD",
+ "CFast", /* 0x09 */
+ };
+ if (code < ARRAY_SIZE(form))
+ str = form[code];
+
+ pr_attr("Form Factor", "%s", str);
+}
+
+static void dmi_hp_242_speed(const char *attr, u16 speed)
+{
+ if (speed)
+ pr_attr(attr, "%hu Gbit/s", speed);
+ else
+ pr_attr(attr, "%s", "Unknown");
+}
+
static int dmi_decode_hp(const struct dmi_header *h)
{
u8 *data = h->data;
@@ -581,6 +896,51 @@ static int dmi_decode_hp(const struct dmi_header *h)
}
break;
+ case 216:
+ /*
+ * Vendor Specific: Version Indicator Record
+ *
+ * This record is used to allow determining Firmware and CPLD revisions for
+ * components in the system. The goal of this record is to provide a
+ * flexible method to communicate to software and firmware the revisions
+ * of these components. This record replaces much of the functionality of
+ * Record Type 193. OEM SMBIOS Record Type 193 was not scaling well with
+ * the large number of potential CPLD devices, power management controllers,
+ * etc. This record is flexible such that each instance of Type 216
+ * defines one firmware component. This record also includes the string
+ * name for which software should refer to the component. The record
+ * includes both data bytes to indicate the revision and a string value. A
+ * firmware component can implement either or both. If both are supported,
+ * it allows easy display of the revision, but prevents the need for
+ * software/firmware to parse strings when doing comparisons on revisions.
+ * As there is one Type 216 Record per firmware component, the Handle for
+ * the Record can be used to tie firmware components with other OEM SMBIOS
+ * Records in the future if needed (similar to how SMBIOS Type 17 is tied
+ * to other Record Types related to DIMMs)
+ *
+ * Offset | Name | Width | Description
+ * ------------------------------------------
+ * 0x00 | Type | BYTE | 0xD8, Version Indicator Record
+ * 0x01 | Length | BYTE | Length of structure
+ * 0x02 | Handle | WORD | Unique handle
+ * 0x04 | FW Type | WORD | Type of Firmware
+ * 0x06 | FW Name | STRING | Name of Firmware
+ * 0x07 | FW Version | STRING | Firmware Version
+ * 0x08 | Data Format| BYTE | Format of the Version Data
+ * 0x09 |Version Data|12 BYTES| Version Data in Format from field 0x08
+ * 0x15 | Unique ID | WORD | Unique ID for Firmware flash
+ */
+ if (gen < G8) return 0;
+ pr_handle_name("%s Version Indicator", company);
+ if (h->length < 23) break;
+ dmi_hp_216_fw_type(WORD(data + 0x04));
+ pr_attr("Firmware Name String", "%s", dmi_string(h, data[0x06]));
+ pr_attr("Firmware Version String", "%s", dmi_string(h, data[0x07]));
+ dmi_hp_216_version(data[0x08], data + 0x09);
+ if (WORD(data + 0x15))
+ pr_attr("Unique ID", "0x%04x", WORD(data + 0x15));
+ break;
+
case 219:
/*
* Vendor Specific: HPE ProLiant Information
@@ -599,6 +959,64 @@ static int dmi_decode_hp(const struct dmi_header *h)
pr_subattr("UEFI", "%s", feat & 0x1400 ? "Yes" : "No");
break;
+ case 224:
+ /*
+ * Vendor Specific: Trusted Module (TPM or TCM) Status
+ *
+ * Offset | Name | Width | Description
+ * -------------------------------------
+ * 0x00 | Type | BYTE | 0xE0, Trusted Module (TPM or TCM) Status
+ * 0x01 | Length | BYTE | Length of structure
+ * 0x02 | Handle | WORD | Unique handle
+ * 0x04 | Status | BYTE | Status Flag Byte
+ * 0x05 | Ex Stat| BYTE | TPM Extended Status
+ * 0x06 | Type | BYTE | Trusted Module Type
+ * 0x07 | Attrib | BYTE | Trusted Module Attributes
+ * 0x08 | Handle | WORD | Handle to map to Type 216
+ * 0x0A | Chip ID| WORD | Chip Identifier Values
+ */
+ pr_handle_name("%s Trusted Module (TPM or TCM) Status", company);
+ if (h->length < 0x05) break;
+ if (!dmi_hp_224_status(data[0x04]))
+ break;
+ if (h->length < 0x0a) break;
+ dmi_hp_224_ex_status(data[0x04], data[0x05]);
+ dmi_hp_224_module_type(data[0x06]);
+ dmi_hp_224_module_attr(data[0x07]);
+ if (!(opt.flags & FLAG_QUIET))
+ pr_attr("Associated Handle", "0x%04X", WORD(data + 0x8));
+ if (h->length < 0x0c) break;
+ dmi_hp_224_chipid(WORD(data + 0x0a));
+ break;
+
+ case 230:
+ /*
+ * Vendor Specific: Power Supply Information OEM SMBIOS Record
+ *
+ * This record is used to communicate additional Power Supply Information
+ * beyond the Industry Standard System Power Supply (Type 39) Record.
+ *
+ * Offset| Name | Width | Description
+ * -----------------------------------------
+ * 0x00 | Type | BYTE | 0xE6, Power Supply Information Indicator
+ * 0x01 | Length | BYTE | Length of structure
+ * 0x02 | Handle | WORD | Unique handle
+ * 0x04 | Assoc Handle| WORD | Associated Handle (Type 39)
+ * 0x06 | Manufacturer| STRING| Actual third party manufacturer
+ * 0x07 | Revision | STRING| Power Supply Revision Level
+ * 0x08 | FRU Access | BYTE | Power Supply FRU Access Method
+ * 0x09 | I2C Bus Num | BYTE | I2C Bus #. Value based upon context
+ * 0x0A | I2C Address | BYTE | I2C Address
+ */
+ pr_handle_name("%s Power Supply Information", company);
+ if (h->length < 0x0B) break;
+ if (!(opt.flags & FLAG_QUIET))
+ pr_attr("Associated Handle", "0x%04X", WORD(data + 0x4));
+ pr_attr("Manufacturer", "%s", dmi_string(h, data[0x06]));
+ pr_attr("Revision", "%s", dmi_string(h, data[0x07]));
+ dmi_hp_230_method_bus_seg_addr(data[0x08], data[0x09], data[0x0A]);
+ break;
+
case 233:
/*
* Vendor Specific: HPE ProLiant NIC MAC Information
@@ -770,6 +1188,82 @@ static int dmi_decode_hp(const struct dmi_header *h)
pr_attr("Lowest Supported Version", "Not Available");
break;
+ case 242:
+ /*
+ * Vendor Specific: HPE Hard Drive Inventory Record
+ *
+ * This record provides a mechanism for software to gather information for
+ * NVMe and SATA drives that are directly attached to the system. This
+ * record does not contain drive information for drives attached to a HBA
+ * (i.e. a SmartArray controller). This record will only contain information
+ * for a hard drive detected by the BIOS during POST and does not
+ * comprehend a hot plug event after the system has booted.
+ *
+ * Offset | Name | Width | Description
+ * ---------------------------------------
+ * 0x00 | Type | BYTE | 0xF2, HPE Hard Drive Inventory Record
+ * 0x01 | Length | BYTE | Length of structure
+ * 0x02 | Handle | WORD | Unique handle
+ * 0x04 | Hndl Assoc | WORD | Handle to map to Type 203
+ * 0x06 | HDD Type | BYTE | Hard drive type
+ * 0x07 | HDD Uniq ID| QWORD | SATA-> WWID. NVMe -> IEEE Ext Uniq ID.
+ * 0x0F | Capacity | DWORD | Drive Capacity in Mbytes
+ * 0x13 | Hours | 16BYTE| Number of poweron hours
+ * 0x23 | Reserved | BYTE | Reserved
+ * 0x24 | Power | BTYE | Wattage
+ * 0x25 | Form Factor| BYTE | HDD Form Factor
+ * 0x26 | Health | BYTE | Hard Drive Health Status
+ * 0x27 | Serial Num | STRING| NVMe/SATA Serial Number
+ * 0x28 | Model Num | STRING| NVMe/SATA Model Number
+ * 0x29 | FW Rev | STRING| Firmware revision
+ * 0x2A | Location | STRING| Drive location
+ * 0x2B | Crypt Stat | BYTE | Drive encryption status from BIOS
+ * 0x2C | Capacity | QWORD | Hard Drive capacity in bytes
+ * 0x34 | Block Size | DWORD | Logical Block Size in bytes
+ * 0x38 | Rot Speed | WORD | Nominal Rotational Speed (RPM)
+ * 0x3A | Neg Speed | WORD | Current negotiated bus speed
+ * 0x3C | Cap Speed | WORD | Fastest Capable Bus Speed of drive
+ */
+ if (gen < G10) return 0;
+ pr_handle_name("%s ProLiant Hard Drive Inventory Record", company);
+ if (h->length < 0x2C) break;
+ if (!(opt.flags & FLAG_QUIET))
+ pr_attr("Associated Handle", "0x%04X", WORD(data + 0x4));
+ dmi_hp_242_hdd_type(data[0x06]);
+ pr_attr("ID", "%llx", QWORD(data + 0x07));
+ if (h->length < 0x3E)
+ pr_attr("Capacity", "%u MB", DWORD(data + 0x0F));
+ else
+ dmi_print_memory_size("Capacity", QWORD(data + 0x2C), 0);
+ /* NB: Poweron low QWORD good for 2,104,351,365,926,255 years */
+ pr_attr("Poweron", "%ld hours", QWORD(data + 0x13));
+ if (data[0x24])
+ pr_attr("Power Wattage", "%hhu W", data[0x24]);
+ else
+ pr_attr("Power Wattage", "%s", "Unknown");
+ dmi_hp_242_form_factor(data[0x25]);
+ feat = data[0x26];
+ pr_attr("Health Status", "%s", (feat == 0x00) ? "OK" :
+ (feat == 0x01) ? "Warning" :
+ (feat == 0x02) ? "Critical" :
+ (feat == 0xFF) ? "Unknown" : "Reserved");
+ pr_attr("Serial Number", dmi_string(h, data[0x27]));
+ pr_attr("Model Number", dmi_string(h, data[0x28]));
+ pr_attr("Firmware Revision", dmi_string(h, data[0x29]));
+ pr_attr("Location", dmi_string(h, data[0x2A]));
+ feat = data[0x2B];
+ pr_attr("Encryption Status", "%s", (feat == 0) ? "Not Encrypted" :
+ (feat == 1) ? "Encrypted" :
+ (feat == 2) ? "Unknown" :
+ (feat == 3) ? "Not Supported" : "Reserved");
+ if (h->length < 0x3E) break;
+ pr_attr("Block Size", "%u bytes", DWORD(data + 0x34));
+ /* Rotational Speed: 0 -> Not Reported, 1 -> N/A (SSD) */
+ if (data[0x38] > 1)
+ pr_attr("Rotational Speed", "%hhu RPM", data[0x38]);
+ dmi_hp_242_speed("Negotiated Speed", WORD(data + 0x3A));
+ dmi_hp_242_speed("Capable Speed", WORD(data + 0x3C));
+ break;
default:
return 0;
}