Merge branch 'release/debian/1.8.19-1'debian/1.8.19-1

5 files changed, 631 insertions, 530 deletions

diff --git a/control/Makefile.am b/control/Makefile.am
index 91950d6..7913312 100644
--- a/control/Makefile.am
+++ b/control/Makefile.am
@@ -31,7 +31,7 @@
 MAINTAINERCLEANFILES	= Makefile.in
 
 EXTRA_DIST		= pkginfo.in prototype.in \
-			  ipmitool.spec.in rpmmacros.in rpmrc
+			  ipmitool.spec.in
 
-dist-hook: pkginfo prototype rpmmacros
+dist-hook: pkginfo prototype
 
diff --git a/control/Makefile.in b/control/Makefile.in
deleted file mode 100644
index 3c1ae92..0000000
--- a/control/Makefile.in
+++ /dev/null
@@ -1,503 +0,0 @@
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-# Copyright (c) 2003 Sun Microsystems, Inc.  All Rights Reserved.
-# 
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-# 
-# Redistribution of source code must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-# 
-# Redistribution in binary form must reproduce the above copyright
-# notice, this list of conditions and the following disclaimer in the
-# documentation and/or other materials provided with the distribution.
-# 
-# Neither the name of Sun Microsystems, Inc. or the names of
-# contributors may be used to endorse or promote products derived
-# from this software without specific prior written permission.
-# 
-# This software is provided "AS IS," without a warranty of any kind.
-# ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES,
-# INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A
-# PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY EXCLUDED.
-# SUN MICROSYSTEMS, INC. ("SUN") AND ITS LICENSORS SHALL NOT BE LIABLE
-# FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING
-# OR DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES.  IN NO EVENT WILL
-# SUN OR ITS LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA,
-# OR FOR DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR
-# PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF
-# LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE,
-# EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
-VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-am__make_running_with_option = \
-  case $${target_option-} in \
-      ?) ;; \
-      *) echo "am__make_running_with_option: internal error: invalid" \
-              "target option '$${target_option-}' specified" >&2; \
-         exit 1;; \
-  esac; \
-  has_opt=no; \
-  sane_makeflags=$$MAKEFLAGS; \
-  if $(am__is_gnu_make); then \
-    sane_makeflags=$$MFLAGS; \
-  else \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        bs=\\; \
-        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-    esac; \
-  fi; \
-  skip_next=no; \
-  strip_trailopt () \
-  { \
-    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
-  }; \
-  for flg in $$sane_makeflags; do \
-    test $$skip_next = yes && { skip_next=no; continue; }; \
-    case $$flg in \
-      *=*|--*) continue;; \
-        -*I) strip_trailopt 'I'; skip_next=yes;; \
-      -*I?*) strip_trailopt 'I';; \
-        -*O) strip_trailopt 'O'; skip_next=yes;; \
-      -*O?*) strip_trailopt 'O';; \
-        -*l) strip_trailopt 'l'; skip_next=yes;; \
-      -*l?*) strip_trailopt 'l';; \
-      -[dEDm]) skip_next=yes;; \
-      -[JT]) skip_next=yes;; \
-    esac; \
-    case $$flg in \
-      *$$target_option*) has_opt=yes; break;; \
-    esac; \
-  done; \
-  test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-target_triplet = @target@
-subdir = control
-DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
-	$(srcdir)/pkginfo.in $(srcdir)/prototype.in \
-	$(srcdir)/rpmmacros.in $(srcdir)/ipmitool.spec.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES = pkginfo prototype rpmmacros ipmitool.spec
-CONFIG_CLEAN_VPATH_FILES =
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN     " $@;
-am__v_GEN_1 = 
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 = 
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-ARCH = @ARCH@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BASEDIR = @BASEDIR@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DISTRO = @DISTRO@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FGREP = @FGREP@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INTF_BMC = @INTF_BMC@
-INTF_BMC_LIB = @INTF_BMC_LIB@
-INTF_DUMMY = @INTF_DUMMY@
-INTF_DUMMY_LIB = @INTF_DUMMY_LIB@
-INTF_FREE = @INTF_FREE@
-INTF_FREE_LIB = @INTF_FREE_LIB@
-INTF_IMB = @INTF_IMB@
-INTF_IMB_LIB = @INTF_IMB_LIB@
-INTF_LAN = @INTF_LAN@
-INTF_LANPLUS = @INTF_LANPLUS@
-INTF_LANPLUS_LIB = @INTF_LANPLUS_LIB@
-INTF_LAN_LIB = @INTF_LAN_LIB@
-INTF_LIPMI = @INTF_LIPMI@
-INTF_LIPMI_LIB = @INTF_LIPMI_LIB@
-INTF_OPEN = @INTF_OPEN@
-INTF_OPEN_LIB = @INTF_OPEN_LIB@
-INTF_SERIAL = @INTF_SERIAL@
-INTF_SERIAL_LIB = @INTF_SERIAL_LIB@
-INTF_USB = @INTF_USB@
-INTF_USB_LIB = @INTF_USB_LIB@
-IPMITOOL_INTF_LIB = @IPMITOOL_INTF_LIB@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-NM = @NM@
-NMEDIT = @NMEDIT@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OS = @OS@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-POW_LIB = @POW_LIB@
-PSTAMP = @PSTAMP@
-RANLIB = @RANLIB@
-RPMBUILD = @RPMBUILD@
-RPM_RELEASE = @RPM_RELEASE@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-VERSION = @VERSION@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_configure_args = @ac_configure_args@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target = @target@
-target_alias = @target_alias@
-target_cpu = @target_cpu@
-target_os = @target_os@
-target_vendor = @target_vendor@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-MAINTAINERCLEANFILES = Makefile.in
-EXTRA_DIST = pkginfo.in prototype.in \
-			  ipmitool.spec.in rpmmacros.in rpmrc
-
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign control/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign control/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure:  $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-pkginfo: $(top_builddir)/config.status $(srcdir)/pkginfo.in
-	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
-prototype: $(top_builddir)/config.status $(srcdir)/prototype.in
-	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
-rpmmacros: $(top_builddir)/config.status $(srcdir)/rpmmacros.in
-	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
-ipmitool.spec: $(top_builddir)/config.status $(srcdir)/ipmitool.spec.in
-	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-	$(MAKE) $(AM_MAKEFLAGS) \
-	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
-	  dist-hook
-check-am: all-am
-check: check-am
-all-am: Makefile
-installdirs:
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean: clean-am
-
-clean-am: clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-am
-	-rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am:
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic clean-libtool \
-	cscopelist-am ctags-am dist-hook distclean distclean-generic \
-	distclean-libtool distdir dvi dvi-am html html-am info info-am \
-	install install-am install-data install-data-am install-dvi \
-	install-dvi-am install-exec install-exec-am install-html \
-	install-html-am install-info install-info-am install-man \
-	install-pdf install-pdf-am install-ps install-ps-am \
-	install-strip installcheck installcheck-am installdirs \
-	maintainer-clean maintainer-clean-generic mostlyclean \
-	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
-	tags-am uninstall uninstall-am
-
-
-dist-hook: pkginfo prototype rpmmacros
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/control/ipmitool.spec.in b/control/ipmitool.spec.in
index 85e61f9..6b5127a 100644
--- a/control/ipmitool.spec.in
+++ b/control/ipmitool.spec.in
@@ -1,10 +1,13 @@
+%define debug_package %{nil}
+
 Name:         ipmitool
 Summary:      ipmitool - Utility for IPMI control
 Version:      @VERSION@
 Release:      @RPM_RELEASE@%{?_distro:.%{_distro}}
 License:      BSD
 Group:        Utilities
-Packager:     Jim Mankovich <jmank@hp.com>
+#Packager:    PackagerName <packager@example.com>
+Distribution: GitHub Build
 Source:       %{name}-%{version}.tar.gz
 Buildroot:    /var/tmp/ipmitool-root
 
@@ -31,7 +34,7 @@ fi
 %setup
 
 %build
-./configure --with-kerneldir \
+./configure \
 	--with-rpm-distro=@DISTRO@ \
 	--prefix=%{_prefix} \
 	--bindir=%{_bindir} \
@@ -56,11 +59,632 @@ fi
 %attr(755,root,root) %{_bindir}/*
 %attr(755,root,root) %{_sbindir}/*
 %{_datadir}/ipmitool/*
+%{_datadir}/misc/*
 %{_mandir}/man*/*
 %doc %{_datadir}/doc/ipmitool
 
 
 %changelog
+* Sat Oct 8 2016 <gilles.buloz@kontron.com>  1.8.18-1
+- Add mac2str() and str2mac() to print/parse MAC address
+- Change formatting, remove commented-out code in
+  src/plugins/imb/imbapi.c
+- Export find_lan_channel() as global
+- Expose _ipmi_get_channel_info()
+- Extend buf2str to allow separator
+- Fix indentation of #define in src/plugins/imb/imbapi.c
+- Fix missing `goto out_free;` when ipmi_parse_hex() returns (-1)
+- Fix warning for buf2str argument
+- ID 408 - fix sel list last X listing
+- ID: 38 - Protocol violating SOL retries when talking to
+  SIMSO-HTC
+- ID: 459 - Fix reading FRU on Artesyn (Emerson) shelf manager,
+  MF105.
+- ID: 464 - ipmievd crash fix in log_event
+- ID:230 - check return value of malloc() in lib/ipmi_ekanalyzer.c
+- ID:261 - Fix err. output consistency for % ipmitool chassis
+  INV_PARAM;
+- ID:287 - Fix print-out of DDR3 SDRAM Serial Number
+- ID:287 - Remove trailing white-spaces from dimm_spd.c
+- ID:289 - bmx-snmp-proxy: PEF alerting does not work for
+  multiple destinations
+- ID:312 - BREAKING CHANGE - Re-design of PEF user interface
+- ID:312 - Fix bitmask in _ipmi_set_pef_policy_entry()
+- ID:335 - Check return value of fseek(), prevent segfault
+- ID:335 - Check return value of fseek(), prevent segfault
+- ID:355 - Comment out statement without effect in lib/ipmi_sel.c
+- ID:355 - Fix 'missing initializer' in struct lan_param
+- ID:355 - Fix ``warning: ISO C forbids zero-size array 'data'''
+- ID:355 - Fix different pointer type in lib/ipmi_picmg.c
+- ID:355 - Fix missing struct initializers in lib/ipmi_firewall.c
+- ID:355 - Fix printf format in lib/ipmi_sunoem.c
+- ID:355 - Fix printf() related warnings in lib/ipmi_delloem.c
+- ID:355 - Fix signedness warnings in lib/ipmi_sdr.c
+- ID:355 - Fix statements without effect in lib/ipmi_ekanalyzer.c
+- ID:355 - Move section_id from ipmi_fru. to ipmi_fru.c
+- ID:355 - Replace DEBUG() macro with lprintf(LOG_DEBUG, ...)
+- ID:375 - Add lan6 subcommand to handle IPv6 LAN parameters
+- ID:400 - Add support for VITA-specific sensor types and events.
+- ID:441 - Add support for HMAC_MD5 and HMAC_SHA256
+- ID:443 - Disable USB driver by default on non-Linux systems
+- ID:444 - Cleanup of defaults in configure.ac
+- ID:445 - Fix of compilation on FreeBSD
+- ID:446 - Fix broken firewall reset iterator
+- ID:447 - Fix access beyond array limits in serial_terminal
+- ID:449 - ipmitool close console session for sol deactivate
+  command
+- ID:451 - Modify the memory ecc error display of SEL for new
+  supermicro motherboards.
+- ID:452 - Add PICMG extension 5.x for PICMG extension check
+- ID:454 - Add support for PICMG 3.1 R2.0 Link Types and Link
+  Classes.
+- ID:456 - Unable to disable the VLAN ID using ipmitool
+- ID:457 - Display User ID enable/disable status
+- ID:463 - Removal of Nokia Siemens Networks
+- ID:465 - Supermicro memory ecc Modify the memory ecc error
+  display of SEL for new supermicro boards.
+- Moved ipmi_parse_hex() to helper.c
+- Re-work ipmi_mc_get_guid() and turn it into reusable code
+- Revert "ID:335 - Check return value of fseek(), prevent segfault"
+- Rewrite code with the notion that Kg is binary data, not string
+
+* Sun May 1 2016 <gilles.buloz@kontron.com>  1.8.17-1
+- Add INSTALL and NEWS, mandated by autoconf
+- Added missing ipmi_sel_supermicro.h to template Makefile.am
+- Check rsp->data_len in ipmi_sel_get_info()
+- Fix "redirecting incorrect #include <sys/poll.h> to <poll.h>"
+  warning with musl libc
+- Fix automake compatibility warnings
+- Fix implicit declaration of function
+  'get_nic_selection_mode_12g' in lib/ipmi_delloem.c
+- Fix implicit declaration of function 'ipmi_get_oem' in
+  src/plugins/imb/imb.c
+- Fix implicit declaration of function 'ipmi_get_oem' in
+  src/plugins/lanplus/lanplus.c
+- Fix implicit declaration of function 'ipmi_get_oem' in
+  src/plugins/open/open.c
+- Fix implicit declarations of functions 'HpmfwupgPreUpgradeCheck'
+  and 'ipmi_intf_get_max_request_data_size' in lib/ipmi_hpmfwupg.c
+- Fix implicit declarations of functions
+  'ipmi_intf_set_max_request_data_size' and
+  'ipmi_intf_set_max_response_data_size' in lib/hpm2.c
+- Fix implicit function declaration of
+  ipmi_intf_get_max_response_data_size in lib/ipmi_sdr.c
+- Fix several implicit declarations of functions in
+  lib/ipmi_main.c
+- Fix several implicit function declarations in lib/ipmi_fru.c
+- Fix warning: suggest parentheses around '+' inside '<<'
+  in lib/ipmi_main.c
+- Fix warning: suggest parentheses around arithmetic in operand of
+  '|' in include/ipmitool/hpm2
+- Get rid of old INCLUDES macro, use AM_CPPFLAGS instead.
+- ID 440 - Fix 'unknown type name fd_set error.
+- ID 440 - remove obsolete headers from lib/ipmi_sunoem.c
+- ID:322 - let 'ekanalyzer frushow' run without a working
+  IPMI target
+- ID:355 - Add #include <strings.h> to lib/ipmi_sel.c
+- ID:355 - Add macros and #include and reduce number of warnings
+- ID:355 - Change CFLAG -std=c99 to -std=gnu99
+- ID:355 - Move Super Micro stuff into dedicated header file
+- ID:355 - Remove declared, but not used variables
+- ID:404 - Edit FRU information update problem
+- ID:405 - Use meaningful Generator ID for "ipmitool sel add"
+- ID:407 - Avoid assert on mismatched session ID
+- ID:409 - Fix IPv6 socket creation on Windows/Cygwin.
+- ID:410 - Disable USB interface for Windows/Cygwin by default.
+- ID:410 - Enable/disable USB interface by "auto"
+- ID:411 - Fix HPM.2 revision check for R1.1 and subsequent
+  specification revisions.
+- ID:412 - Check errors when setting a user password.
+- ID:413 - Print new line chne character when setting user
+  privilege.
+- ID:414 - ekanalyzer frushow fails to show 'Product Info'
+  correctly
+- ID:417 - Fix some typos
+- ID:418 - Fix Compiling under Mac OS X
+- ID:419 - List dummy.h in Makefile.am, so it gets included in
+  a release tarball
+- ID:421 - Fix memleak for sol output
+- ID:423 - Don't assume internal use area is present in ekanalyzer
+- ID:424 - Update dimm_spd.c with data from the latest JEDEC List
+- ID:425 - Disable USB interface for OS X/darwin
+- ID:426 - Fallback to run-time detection of PAGESIZE if
+  compile-time detection is not supported
+- ID:426 - Include sys/socket.h instead of asm/socket.h
+- ID:426 - Include wchar.h instead of defining wchar_t ourselves
+- ID:427 - Cleanup comment in ipmi_sdr_get_header()
+- ID:427 - The first two bytes of dumped raw SDR data is wrong.
+- ID:428 - Update IANA numbers / Product Name for IBM and ADLINK
+- ID:430 - Change Nokia Siemens Networks to Nokia Solutions
+  and Networks
+- ID:431 - Fix correct interpretation of led states
+- ID:437 - sel: Fix "sel time set <time>"
+- Make bootstrap script part of dist packages
+- Remove #if 0 code aka not-compiled-in
+- Remove trailing white-spaces in lib/log.c
+- git-ignore autoconf-generated files
+
+* Sun Nov 22 2015 <gilles.buloz@kontron.com>  1.8.16-1
+- Add _ipmi_get_channel_access() and _ipmi_get_channel_info()
+- Add _ipmi_get_user_access() and _ipmi_set_user_access()
+- Add _ipmi_get_user_name()
+- Add _ipmi_set_channel_access() function
+- Add _ipmi_set_user_password() function
+- Add limits check in get_cmdline_macaddr()
+- Change expression in ipmi_pef_get_info() in order to silence Coverity
+- Change expression in ipmi_pef_list_policies() in order to silence Coverity
+- Code cleanup in ipmi_user_main()
+- Create ask_password() and re-use code
+- Delete dead code from ipmi_sunoem_echo() - CID#1261338
+- Don't output pidfile before parsing command line arguments
+- Don't use tmp variable since it's not necessary in ipmi_user_test()
+- Fix 'user help' output
+- Fix Assign instead of compare in KfwumGetDeviceInfo() - CID#1149034
+- Fix Identical code for different branches in ipmi_tsol_main() -
+  CID#1261346
+- Fix big parameter passed by value in ipmi_sel_oem_match() - CID#1261347
+- Fix dead code in ipmi_firewall_reset() - CID#1261342
+- Fix eval logic in ipmi_user_priv()
+- Fix file descriptor leak in ipmi_exec_main() - CID#1149040
+- Fix identical code for diff branches in DellOEM - CID#1261326
+- Fix memory leak in get_supermicro_evt_desc()
+- Fix memory leak in ipmi_ek_display_board_info_area() - CID#1149051
+- Fix missing return in ipmi_kontronoem_main() - CID#1261317
+- Fix of previous commit - memset() expects pointer
+- Fix out-of-bound-reads in get_supermicro_evt_desc()
+- Fix resource leak in fru_area_print_board() - CDI#1149048
+- Fix resource leak in fru_area_print_chassis() - CID#1149047
+- Fix resource leak in fru_area_print_product() - CID#1149046
+- Fix resource leak in ipmi_kontron_set_serial_number() - CID#1149041
+- Fix typo vlan->VLAN in ipmi_lan_set_vlan_id() and
+  ipmi_lan_set_vlan_priority()
+- Fix uninitialized struct in ipmi_fru_upg_ekeying() - CID#1149065
+- Fix user input validation in Channel and User sub-commands
+- Fix wrong size argument in ipmi_sdr_list_cache_fromfile() - CID#1149056
+- Fix/remove pointer cast in _ipmi_set_user_access()
+- Hook functions in ipmi_user to _ipmi_set_user_password()
+- Hook ipmi_get_channel_info() to _ipmi_get_*()
+- Hook ipmi_get_channel_medium() to new _ipmi_get_*() functions
+- Hook ipmi_lan_set_password() to _ipmi_set_user_password()
+- Hook ipmi_print_user_list() and friends to _ipmi_* functions
+- Hook ipmi_set_alert_enable() to _ipmi_*()
+- Hook ipmi_set_user_access() to _ipmi_set_user_access()
+- Hook ipmi_user_priv() to _ipmi_set_user_access()
+- ID:307 - Intel I82751 super pass through mode fixup
+- ID:355 - Fix compiler warnings for Dummy Interface
+- ID:380 - raw commands override retry and timeout values
+- ID:319 - Interface safe re-open
+- ID:320 - Add VITA 46.11 support
+- ID:333 - Set read timeout to 15s in OpenIPMI interface
+- ID:336 - ipmitool does not fall back to IPv4 for IPMI v2 / RMCP+ sessions
+- ID:343 - Print actual sensor thresholds in 'sensors' comand
+- ID:343 - Remove AC_FUNC_MALLOC
+- ID:344 - Fix HPM.2 long message support
+- ID:345 - Do not do several close session retries when catching SIGINT
+- ID:346 - lib/ipmi_sdradd.c ipmi_sdr_read_record has a file descriptor leak
+- ID:347 - Incorrect reserved channel number
+- ID:348 - Add support for the "System Firmware Version"
+- ID:349 - user set password - add option to choose 16/20 byte password
+- ID:354 - Replace obsolete u_int with uint32_t in dimm_spd.c
+- ID:354 - Replace obsolete u_int[0-9]+_t with standardized types in Free
+  iface
+- ID:354 - forcefully switch to C99 and more strict CFLAGS
+- ID:354 - replace/drop caddr_t in IMB
+- ID:354 - struct member h_addr has been replaced
+- ID:354 - uint8_t >= 0 is always true, don't test it
+- ID:355 - Fix Enumeration value not handled in ipmi_get_event_desc()
+- ID:355 - Fix ``ISO C forbids omitting the middle term of a ?: expression''
+- ID:355 - Fix ``obsolete use of designated initializer with ¿:¿'' warning
+- ID:355 - Fix comparison of unsigned expression
+- ID:355 - Fix compiler warnings
+- ID:355 - Fix compiler warnings in dimm_spd.c
+- ID:355 - Fix couple compiler warnings in ipmi_lanp.h
+- ID:355 - Fix formatting warning in get_cmdline_ipaddr()
+- ID:355 - Fix zero-length format string warning in
+  get_supermicro_evt_desc()
+- ID:355 - Remove defined but unused variable in _set_command_enables()
+- ID:355 - remove unused variables from ipmi_dcmi.c
+- ID:357 - out-of-bound access in DDR4 code ID:356 -  DIMM4 Die Count is
+  unreachable
+- ID:357 - out-of-bound access in DDR4 code
+- ID:358 - check data length in else branch of ipmi_spd_print()
+- ID:361 - Add a OEM IANA information
+- ID:363 - Node Manager feature patch.
+- ID:363 - fix Coverity issues in NM implementation
+- ID:364 - Fix for serial-basic interface bridging
+- ID:365 - Fix for ipmitool crash when using serial-terminal interface
+- ID:366 - Properly clean LAN and LAN+ interfaces on close
+- ID:367 - Fix building of non-bridged LAN interface commands
+- ID:368 - Fix handling of bridging-related parameters
+- ID:369 - Fix lanplus interface bridging and response matching
+- ID:370 - add anonymous union support in CFLAGS for older gcc
+- ID:371 - add ericsson oem
+- ID:373 - Fix compilation of IMB on Windows
+- ID:374 - Check/set LED Duration correctly
+- ID:376 - Add means to configure "Bad Password Threshold"
+- ID:381 - Script to log installation status as SEL events
+- ID:382 - Fix memcpy() params in HpmFwupgActionUploadFirmware()
+- ID:383 - Fix compile-time error in src/plugins/lan/lan.c
+- ID:384 - Fix compilation under cygwin64
+- ID:388 - Fix Error message always printed if BMC does not support VITA
+- ID:388 - Handle ccode 0xCC as well in VITA discovery
+- ID:388 - Turn all messages into LOG_INFO in VITA discovery
+- ID:389 - Add on of Advantech IANA number
+- ID:390 - Support for new Communication Interface (USB Medium)
+- ID:391 - changing data_len from 17 to 16 according to ipmi spec 22.29,
+  first byte is completion code
+- ID:392 - _ipmi_get_user_name() work-around for some BMCs
+- ID:393 - ipmitool man page addition for Node Manager support.
+- ID:394 - close fp if isn't NULL and set it NULL afterwards in USB plugin
+- ID:394 - plugins/usb: Fix probe for SCSI devices
+- ID:395 - Fix fru string without resizing it
+- ID:396 - Fixed invalid length check in picmg led cap command.
+- ID:397 - Fixed picmg policy set command.
+- ID:398 - Fixed channel setaccess command.
+- ID:399 - Fixed channel getciphers command.
+- ID:401 - Fixed 30 second delay when activating SOL on 'dumb' Intel MACs.
+- ID:402 - Misguiding error print-out when using some 'lan' commands.
+- Init user_access_t struct in ipmi_user_priv()
+- Make user User Privilege Limit is within range
+- Node Manager Feature, correct 1268194 missing break.
+- Output pidfile only in verbose mode
+- Print error message to STDERR in ipmi_channel.c
+- Re-work 'channel getaccess' and 'channel setaccess'
+- Re-work ccode eval in ipmi_get_channel_medium()
+- Remove commented-out code in ipmi_picmg_clk_set() - CID#1261339
+- Remove dead code - rsp can't be NULL at this point - CID#1149005
+- Remove dead code in fru_area_print_board() - CID#1149001
+- Remove dead code in fru_area_print_chassis() - CID#1149000
+- Remove dead code in fru_area_print_product() - CID#1148999
+- Remove dead(duplicate) code from ipmi_sol_main() - CID#1148996
+- Remove get_channel_access_rsp and get_channel_info_rsp structs
+- Remove ipmi_user_set_password()
+- Remove length checks in get_supermicro_evt_desc()
+- Remove redundant user-input conversion from ipmi_sel_delete()
+- Remove trailing white-spaces in ipmi_user.c
+- Remove trailing white-spaces in ipmi_user.c
+- Remove trailing white-spaces in src/plugins/dummy/dummy.c
+- Remove unused variable from ipmi_get_channel_cipher_suites()
+- Replace deprecated bzero() with memset()
+- Replace s6_addr16 with s6_addr since Mac OS X does not have it
+- Rewrite ipmi_set_channel_access()
+- Split ipmi_user_main() into smaller functions
+- ipmi_print_user_summary() to utilize _ipmi_get_user_access()
+- ipmitool delloem: ipmitool delloem extension always return success - fix
+  it
+
+* Mon Nov 24 2014 <gilles.buloz@kontron.com>  1.8.15-1
+- ID: 340 - ipmitool sol session improperly closes on packet retry
+- ID: 277 - support for hostnames longer than 64 chars
+- ID: 313 - ipmitool doesn't support hostname long than 64 symbols
+- ID: 277 - Minor issue with ipmi_intf_session_set_hostname()
+- ID: 247 - 'sensor thresh' help output is wrong
+- ID: 324 - conflicting declaration write_fru_area()
+- ID: 337 - Add support for 13G Dell PowerEdge
+- ID: 325 - DDR4 DIMM Decoding Logic
+- ID: 328 - HPM.2 fixes
+- ID: 329 - hpm.1 upgrade fixes
+- ID: 103 - picmg discover messages should be DEBUG, not INFO
+- ID: 331 - Passwords provided in file (-f option) truncated on space
+- ID: 318 - ipmi_tsol.c: fix buffer overflow
+- ID: 306 - "fru print" command prints the FRU #0 twice
+- ID: 305 - HPM.1 deferred activation support fixup
+- ID: 317 - ipmi_fwum.c: fix typo
+- ID: 315 - buildsystem: configure.in is deprecated
+- ID: 316 - Directory debian is outdated
+- ID: 103 - 'lib/ipmi_ekanalyzer.c' needs a re-work
+- ID: 46 - SEL OEM record corner case
+
+* Mon May 5 2014 <gilles.buloz@kontron.com>  1.8.14-1
+- ID: 299 - openipmi plugin writes zero to wrong byte
+- ID: 301 - Add OS/Hypervisor installation status events
+- ID: 298 - fix LANplus retry
+- ID: 295 - inform user if SOL session disconnected
+- ID: 297 - don't print-out SEL entry if ID not present
+- ID: 296 - Fix PSD size decoding
+- ID: 293 - Use of uninitialized variable in ipmi_main()
+- ID: 278 - Error in sol looptest
+- ID: 290 - ipmi_sol.c needs a clean-up
+- ID: 85 - Supermicro memory ECC error display
+- ID: 290 - ipmi_sol.c needs a clean-up
+- ID: 286 - Open session retries hit assert in ipmi_lanplus_send_payload
+- ID: 285 - Fix SEGV in ipmi_lanplus_open_session
+- ID: 284 - Fix SEGV in ipmi_main
+- ID: 283 - ipmi_intf_socket_connect fails with IPv4 hosts
+- ID: 46 -  ipmi_fwum needs some re-work
+- ID: 50 - ipmi_hpmfwupg needs a clean up
+- ID: 279 - ipmitool sdr list broken
+- ID: 44 - dummy interface support - fake-ipmistack project
+- ID: 48 - Remove hard-coded FRU inventory access length restriction
+- ID: 276 - HPM.1 upgrade combined patch
+- ID: 90 - Add options to chassis bootparam set bootflag
+- ID: 292 -Properly handle plugin non-zero target adddress with -t
+- Numerous Fixes based on running Coverity
+- Use TIOCFLUSH if TCFLSH is missing to get the serial plugin building on
+  Hurd.
+- Disable imb and open plugins by default on Hurd.  The platform lack
+  the required kernel support.
+- Change serial plugin to only try to disable the IUCLC serial line flag on
+  platforms supporting it.  Fixes build problem on Hurd and FreeBSD.
+- PA: 83 -  Revised IPv6 patch
+- FR: 24 -  Exchange OS Name Hostname BMC URL during startup
+- ID: 304 - Incorect byteswap in SOL maximum payload
+- ID: 303 - Fix build error in HPM.2 code
+- ID: 300 - new sunoem functionality
+- ID: 144 - Fix 'dcmi power set_limit action <value>'
+- ID: 302 - HPM.2 long message support
+- ID: 309 - Add new SEL entries for ipmi 2.0 rev 1.1
+- ID: 280 - man page cleanup
+- ID: 311 - man page update for new sunoem commands
+
+* Mon Sep 9 2013 <gilles.buloz@kontron.com>  1.8.13-1
+- ID: 3611905 - Direct Serial Basic/Terminal Mode Interface drivers
+- ID: 3577766 - configure's knobs and switches don't work
+- ID: 3611253 - do not override OS-default values for interfaces
+- ID: 65 - Fixes for configure.in for cross compilation
+- ID: 3571153 - OpenIPMI/ipmievd fails to compile on Solaris
+- numerous ipmitool man page updates
+- ID: 3611226 - Bridging support for PICMG Platforms
+- Add support for getsysinfo/setsysinfo commands to ipmi mc
+- Cleanup Dell OEM code to use new sysinfo interface
+- ID: 93 - str-to-int conversion is weak
+- ID: 3582307 - ipmi_fru - ipmi_fru_main() return codes
+- ID: 3582310 - ipmi_fru - ipmi_fru_main() - misuse of printf()
+- ID: 3576213 - ipmi_fru - unused variable
+- ID: 3578276 - ipmi_fru - free() on freed memory possible
+- ID: 3578275 - ipmi_fru - memory leaks
+- ID: 3528271 - ipmi_fru - possible *flow via FRUID
+- ID: 3578277 - ipmi_fru - possible NULL pointer
+- ID: 3612372 - Recognize Broadcom IANA number and BCM5725 product
+- ID: 3608758 - add IPMI_NETFN_OEM
+- ID: 143 - Reversed 'channel authcap' capabilities
+  Fixes reversed IPMIv1.5/2.0 'channel authcap' capabilities
+- ID: 3587318 - "dcmi discover" is not DCMI 1.5 compatible
+- ID: 3608757 - ipmi_fru - various fixes
+- ID: 3598203 - 'mc getsysinfo|setsysinfo' needs a bit of re-work
+- ID: 3597782 - ipmi_mc - sysinfo_param() has two consecutive returns
+- ID: 3597781 - 'mc getsysinfo|setsysinfo' help has typos
+- ID: 3608763 - ipmi_sdr - code cleanup & output display cleanup
+- ID: 3610286 - ipmi_sdr - ipmi_sdr_print_type - incorrect eval
+- ID: 3600930 - ipmi_sdr - code cleanup
+- ID: 3602439 - ipmi_sdr - memory leaks
+- ID: 3595199 - ipmi_sdr - Add support for 'ipmitool sdr <list|elist> help'
+- ID: 3592773 - 'ipmitool sdr info'; prints incorrect info
+- ID: 3592770 - 'ipmitool sdr list|elist INV_INPUT' return code
+- ID: 3577159 - ipmi_sdr - uint32_t cast to uint8_t and back
+- ID: 3528368 - ipmi_sdr - possible int *flow
+- ID: 226 - ipmi_sdradd - typo
+- ID: 258 - ipmi_sdradd - error printed on STDOUT
+- Fixed ipmievd start under systemd.
+- ID: 3608760 - Add bswap.h to ipmi_chassis.c and ipmi_pef.c
+- ID: 3564701 - ipmitool 1.8.12 doesn't build on big endian architectures
+- ID: 3600907 - defined value for "Chassis may not support Force Identify"
+- ID: 256 - ipmitool could crash when IPv6 address is returned
+- ID: 211 - 'lib/ipmi_dcmi.c' - typo & error printed on STDOUT
+- ID: 3612237 - If DCMI command fails, incorrect completion code is printed
+- ID: 3608149 - ipmitool - set pointer to NULL after free()
+- ID: 3603419 - DCMI - waste of resources
+- ID: 3600908 - DMCI - crash in ipmi_print_sensor_info(), NULL ref
+- ID: 3609985 - delloem : Wrong MAC returned when flex addressing is enabled
+- ID: 113 - delloem exec file won't handle more than one command
+- ID: 28 - delloem - clean up the code
+- ID: 3608261 - delloem - code formatting
+- ID: 3528247 - delloem - fix possible *int flows
+- ID: 3600910 - delloem - code cleanup
+- ID: 3576211 - delloem - unused variable
+- ID: 3578022 - delloem - fix typos
+- ID: 263 - ipmi_ek* - cleanup
+- ID: 3308765 - ipmi_ek* - cleanup
+- ID: 3586228 - ipmi_ek* - ipmi_ekanalyzer_usage() rework
+- ID: 3528388 - ipmi_ek* - a typo in error message
+- ID: 3576212 - ipmi_event - better rsp handling
+- ID: 3607393 - ipmi_event - redundant '\n' in error message
+- ID: 153 - ipmi_firewall - printf() used instead of lprintf()
+- ID: 3608003 - ipmi_fru - atol() should be replaced with str2*()
+- ID: 3600911 - ipmi_fru - fix multiple increments in args to printf
+- ID: 3600914 - no more crash on no response. allow more send/recv loops of waiting.
+- ID: 70 - Fixes and updates for ipmitool hpm
+- ID: 3528308 - ipmi_hpmfwupg - possible int *flow
+- ID: 3608762 - ipmi_hpmfwup - Fixed help messages for hpm command
+- ID: 3607981 - ipmi_lanp - replace atoi() calls
+- ID: 3607320 - ipmi_lanp - possible NULL reference
+- ID: 3600926 - ipmi_lanp - code cleanup
+- ID: 3613575 - memory leak - ipmi_password_file_read()
+- ID: 3522740 - reading password from file is limited to 16byte passwords
+- ID: 3613605 - ipmi_main - call free() on pointer to static data
+- ID: 3608761 - ipmi_main - PICMG Get Device Locator was never run
+- ID: 3577155 - ipmi_main' - memory leaks
+- ID: 239 - typo in 'mc selftest', add details
+- ID: 3597471 - ipmi_mc - needs a bit of re-work - rc, inv. options
+- ID: 3597468 - ipmi_mc - print_mc_usage() prints to STDOUT
+- ID: 3597469 - 'mc watchdog off' prints on STDERR, should be STDOUT
+- ID: 3597470 - 'mc watchdog reset' prints on STDERR, should be STDOUT
+- ID: 3611254 - OEM handle for Intel 82751 in SPT mode
+- ID: 3600927 - change eval order of input param in ipmi_oem_setup()
+- ID: 3600928 - ipmi_pef - code cleanup
+- ID: 3592732 - ipmi_picmg.c - printf() misuse
+- ID: 3528310 - ipmi_picmg.c - NULL reference
+- ID: 3528347 - ipmi_raw.c - possible int *flow
+- ID: 3587913 - Command % ipmitool raw help; returns 1
+- Added code to support sensors on other luns (On behalf of Kontron Germany)
+- ID: 3611912 - Add missing newlines when cvs output is specified
+- ID: 244 - ipmi_sel - "0.0" displayed for unspecified threshold values
+- ID: 3612371 - Typo in impi_sel debug output
+- ID: 3016359 - ipmi_sel - Get SEL Alloc Information is incorrect
+- ID: 3568976 - 'sel set time' behaviour is inconsistent
+- ID: 3528371 - ipmi_sensor - possible int *flow
+- ID: 3601265 - 'ipmitool sensor get' leaks memory
+- ID: 3601106 - 'ipmitool sensor get NACname' output incorrect/inconsistent
+- ID: 3608007 - ipmi_session - typo in error message
+- ID: 101 - ipmi_sol - possible int *flow
+- ID: 3600933 - ipmi_sol - use of deprecated bzero()
+- ID: 3609472 - ipmi_sol - Add the instance to the SOL commands
+- ID: 3588726 - 'ipmitool sol payload status ...;'segfaults on no rsp
+- ID: 3522731 - ipmi_sol - ipmi_get_sol_info() returns always 0
+- ID: 3613042 - add missing Entity IDs
+- ID: 3611306 - ipmi_tsol - fix always fail in case of error
+- ID: 259 - ipmi_user - memory leak
+- ID: 260 - ipmi_user - replace atoi() call
+- ID: 2871903 - ipmitool user priv incorrectly sets Link Auth
+- ID: 3600960 - check the copy of password exists
+- ID: 3609473 - Add assertion/deassertion to threshold events
+- ID: 104 - ipmishell - possible int *flow
+- ID: 262 - 'set' segfaults when no IPMI inf present
+- ID: 257 ipmitool exec segfaults if invalid input given
+- ID: 254 - Fix retry of authentication capabilities retrieval
+- ID: 3611303 - lan - error check is missing braces
+- ID: 253 - Fix lanplus retransmission
+- ID: 212 - 'lib/ipmi_dcmi.c' - possible int *flow
+- ID: 264 - incorrect array index in get_lan_param_select()
+- ID: 269 - Fixes for configure.in for cross compilation
+- ID: 267 - Corruption in "lan alert print" output
+- ID: 41 - ipmi_sel_interpret() - clean up formatting, indentation
+- ID: 242 - Incorrect DCMI Power Reading "IPMI timestamp" interpretation
+- ID: 229 - 'lib/ipmi_ekanalyzer.c' - a typo ``Too few argument!''
+- ID: 266 - file descriptor leak in ipmi_fwum and ipmi_ekanalyzer
+- ID: 99 - 'lib/ipmi_sel.c' - possible int *flow
+- ID: 222 - 'lib/ipmi_sdr.c' - a typo 'Not Reading' -> 'No Reading'
+- ID: 35 - Script to setup redirection of SNMP to/from BMC
+- ID: 273 - Reduce SOL Input buffer size by SOL header size
+
+
+* Thu Aug 9 2012 <gilles.buloz@kontron.com>  1.8.12-1
+- Added IPMB dual bridge support (no need for driver support)
+- Enable compiler warnings and resolve all compiler warning so that
+  ipmitool compiles and links with no warning or error messages
+- add ipmishell line to configure
+- fail configure when no curses or readline is found
+- support sensor bridging in free interface
+- applied fix for issue #2865160 (AIX build)
+- Document the ipmitool dcmi commands in the ipmitool man page
+- Document that some commands are blocked by OpenIPMI.   ID 2962306
+- Document the -N and -R options per tracker ID 3489643
+- fix manpage misdocumentation on cipher suite privilige configuration
+- Add build support for Dell OEM commands
+- Add new Dell OEM commands and update man page
+- added hpm and fwum in man page
+- man page update for fwum and hpm commands
+- Added documentation for 'ime' operating mode, used to update Intel ME.
+- add new -Y option to prompt user to enter kgkey
+- Add DCMI module (Data Center Management Interface)
+- fixed oem/iana data type to allow 24 bits definition
+- Fixed AMC point-to-point record parsing in FRU
+- Fixed detection of packing support in GCC
+- Added packing support detection magic on all packed structures
+  in project
+- Dell specific mac sub command is updated to support the latest 12G
+  Dell servers.  Support for virtual mac is also implemented.
+- Use consistent netfn/cmd for getsysinfo command
+- Add Dell OEM network commands
+- Resolve incorect Board Mfg Data due to incorrect date constant
+- Update ipmi_fru.h to SMBIOS spec 2.6.1 - ID 2916398
+- Support for analog readings in discrete sensors on HP platforms.
+- Change device id mask (IPM_DEV_DEVICE_ID_REV_MASK) 0x07 for 0x0F.
+  As per in IPMI spec V2:
+- Added PICMG clock e-keying and bused resource control identifiers
+- Added PICMG major version (ATCA/AMC/uTCA) identifiers
+- Correct Threshold/Discrete Sensor Display - Patch Tracker ID 3508759
+- Sensor units now handle percentage units - ID 3014014
+- Fixes ID 3421347 Sensor list command should use channel field from SDR
+- Added packing directive for ARM cross compile with GCC 3.4.5,
+  otherwise the sdr structures gets padded and the pointer cast
+  result in incorrect alignement
+- Added 'sdr fill sensors nosats' support to speed up SDR discovery
+- Added SDR name display during discovery (with -v)
+- Added support for sensor types - Processor related sensor
+  type 0x07, system incharectorization 0x20, Memory sensor type.
+- Give more description for SEL which is generated for Uncorrectable
+  ECC and errors with respect to each Memory Bank,Card or DIMM.
+  The Sensor type supporting this are 0x0C and 0x10.
+- Add more details about Version Change event (source of
+  firmware update)
+- enhanced PICMG fru control
+- Integrated Andy Wray's DDR3 SPD parser patch
+- Adds function str2uint() to convert from string to uint32_t with
+  checks for valid input.
+- Fix possible buffer overflow in buf2str()
+- Fixes ID 3485004 - misuse of strtol()
+- Replaces calls to strtol() with str2uchar() calls and adds error
+  messages if invalid input is given.
+- Don't overwite the iflags bits prior to setting the boot parameters.
+  This fixes ipmitool so that
+  chassis bootdev bios clear-cmos=yes
+  will correctly clear the bios cmos.
+- Clarify DCMI get limit activation (add if activate or not).
+- Bug fixes for delloem lan command. This includes the support for 12G
+  Dell license and 12G LAN Specific command.
+- delloem commands should not be executed before parsing command line.
+- Fix stack overflow in delloem setled
+- Fix delloem powermonitor on big-endian platforms.
+- ipmitool delloem powermonitor command should convert data from
+  network-format to the native one, otherwise it shows garbage
+  on ppc/ppc64 platform.
+- Add ipmi_getsysinfo command
+- Add support for drive backplane SetLED functionality
+- Fix for Platform Event Message incorrect Generator ID
+- Fix fru print so that it will display FRU info from satellite
+  controllers.
+- Add support for AMC type 17h record.
+- Fix in fru edit.   It is now possible to edit field 0 of sections
+- New FRU get OEM record command
+- fixed segfault for fru edit when "field id" is not supported and
+  added user feedback for string substitution(success or failure)
+- Improvement to hpm upgrade during activation. This resolves issue
+  where activation seems to have failed because ipmitool received
+  an unsupported completion code.
+- hpm Fixes for multi-platform support.
+- hpm Fix for timeouts during firmware rollback. If completion code
+  is C3, wait till timeout has expired before reporting it.
+- hpm During manual rollback, code now gets target capabilities
+  instead of using a default timeout of 60 seconds.
+- Added firmware auxilliary bytes to hpm outputs
+- hpm Add support for BIG Buffer (Use when -z option is used)
+- Fix the case where ipmitool loses the iol connection during the upload
+  block process.  Once IPMITool was successfully sent the first
+  byte, IPMITool will not resize the block size.
+- Fix the problem when we try to upgrade specific component and the
+  component is already updated,
+- updated HPM firmware agent to version 1.04
+- Fix exit code to return zero on '-o list' or '-o help' option
+- limit length of user name and password that can be supplied by user.
+  Password is limited to 16 bytes, resp. 20 bytes, for LAN, resp.
+  LAN+, interface. User name is limited to 16 bytes, no interface
+  limitations.  ID 3184687, ID 3001519
+- Add retry / timeout options for LAN
+- Changed default cipher suite to 1 instead of 3 for iol20
+- added fix for tracker ID 2849300 "Incorrect Firmware Revision"
+- avoid reopening the interface when already opened
+- Remove message for unsupported PEF capabilities that return valid
+  CC (80h)
+- Added OEM byte (47) to verbose output
+- Add option to provide a list when filling sdr repository
+- SDR discovery speedups
+- Added support for Dell specific sensors
+- Fix segmentation fault on unrecognize OEM events.
+- changed SEL timestamp formatting for 'preinit' SEL entries, allowing
+  the number of seconds to be displayed.
+- Added sensor raw data in verbose mode. Useful for OEM sensor type.
+- Add sensor hysteresis (positive & negative) to the following command
+  ipmitool sensor -v
+- Fixes bug ID 3484936 - missing user input validation
+- Add missing RMCP+ auth type strings
+- Add new Kontron Product in ipmi_strings for product ID.  Kontron
+  KTC5520/EATX Server Motherboard with integrated iBMC/KVM/VM
+  added identification support for Kontron AT8050 ATCA board
+- Constrain setting of the username to no greater than 16 characters
+  per the IPMI specification.   ID 3001519
+- Constrain User ID between 1 and 63.  ID 3519225
+- Fixes ID 3485340 - user input not handled in 'lib/ipmi_user.c'
+- Fixes ignorance of existing daemon PID file which results in PID being
+  overwritten.  Adds proper umask() before writing PID file.
+- applied fix for ID 2865111 (AIX build)
+- Fix a proplem when using bridged IPMI commands on the lanplus
+  interface (-I lanplus with -b -t or -m switches)  resulting in
+  "Close Session command failure".
+- Add fix with usage of CFh (duplicate request).  Usefull for
+  slow commands
+- Fix issue with sequence number. (Speed up transfer)
+
 * Wed Feb 25 2009 <pere@hungry.com>  1.8.11-1
 - Fix new GCC compilation issues in regards to Packing
 - Fix Tracker bug #1642710 - ipmi_kcs_drv being loaded/unloaded
@@ -257,7 +881,7 @@ fi
  - Make ipmievd generate pidfile
  - Add initscripts for ipmievd
 
-* Mon Jan 17 2006 <duncan@iceblink.org>  1.8.6-1
+* Tue Jan 17 2006 <duncan@iceblink.org>  1.8.6-1
  - Fix memory corruption when sending encrypted SOL traffic
  - Add keepalive timer to IPMIv2 SOL sessions
 
@@ -325,7 +949,7 @@ fi
  - new "shell" and "exec" commands
  - lots of other contributed patches
 
-* Sat May 27 2004 <duncan@iceblink.org>  1.5.9-1
+* Thu May 27 2004 <duncan@iceblink.org>  1.5.9-1
  - Add ability to get a particular sensor by name
  - Add ability to set a particular sensor threshold
  - Add support for displaying V2 channel authentication levels
@@ -359,7 +983,7 @@ fi
  - Fix SEL event decoding for generic events
  - Handle empty SEL gracefully when doing "sel list"
  - Fix sdr handling of sensors that do not return a reading
- - Fix for CSV display of sensor readings/units from Fredrik Öhrn
+ - Fix for CSV display of sensor readings/units from Fredrik Öhrn
 
 * Tue Nov 25 2003 <duncan@iceblink.org>  1.5.5-1
  - Add -U option for setting LAN username
diff --git a/control/rpmmacros.in b/control/rpmmacros.in
deleted file mode 100644
index 429e098..0000000
--- a/control/rpmmacros.in
+++ /dev/null
@@ -1,12 +0,0 @@
-%_topdir	%(echo $BUILDDIR)
-%_sourcedir     %{_topdir}/..
-%_specdir       %{_sourcedir}
-%_tmppath	%{_topdir}/tmp
-%_builddir	%{_topdir}/BUILD
-%_buildroot	%{_topdir}/%{_tmppath}/%{name}-%{version}-root
-%_rpmdir	%{_topdir}/RPMS
-%_srcrpmdir	%{_topdir}/SRPMS
-%_distro	@DISTRO@
-%_rpmfilename	%%{NAME}-%%{VERSION}-%%{RELEASE}.%%{ARCH}.rpm
-%packager	jmank@hp.com
-%distribution	Sourceforge Build
diff --git a/control/rpmrc b/control/rpmrc
deleted file mode 100644
index 0a99ecb..0000000
--- a/control/rpmrc
+++ /dev/null
@@ -1,8 +0,0 @@
-macrofiles: /usr/lib/rpm/macros:/usr/lib/rpm/%{_target}/macros:/etc/rpm/macros.specspo:/etc/rpm/macros:/etc/rpm/%{_target}/macros:%(echo $CONFIGDIR)/rpmmacros
-
-buildarchtranslate: athlon: i386
-buildarchtranslate: i686: i386
-buildarchtranslate: i586: i386
-buildarchtranslate: i486: i386
-buildarchtranslate: i386: i386
-