Add new patches

1 files changed, 370 insertions, 0 deletions

diff --git a/debian/patches/0620-manpage_typo.patch b/debian/patches/0620-manpage_typo.patch
new file mode 100644
index 0000000..63ed5d4
--- /dev/null
+++ b/debian/patches/0620-manpage_typo.patch
@@ -0,0 +1,370 @@
+Description: Fix man page typos
+Author: Jörg Frings-Fürst <debian@jff.email>
+Forwarded: not-needed
+Last-Update: 2022-10-29
+---
+This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
+Index: trunk/doc/ipmitool.1.in
+===================================================================
+--- trunk.orig/doc/ipmitool.1.in
++++ trunk/doc/ipmitool.1.in
+@@ -3,7 +3,7 @@
+ ipmitool \- utility for controlling IPMI\-enabled devices
+ .SH "SYNOPSIS"
+ 
+-.BR ipmitool
++.br ipmitool
+ [ <options> ] <command> [ <sub-commands and sub-options> ]
+ 
+ <options>           := [ <general-options> | <conditional-opts> ]
+@@ -68,7 +68,7 @@ On Solaris this driver is called \fIBMC\
+ Management of a remote station requires the IPMI\-over\-LAN interface to be
+ enabled and configured.  Depending on the particular requirements of each
+ system it may be possible to enable the LAN interface using
+-.BR ipmitool
++.br ipmitool
+ over the system interface.
+ .SH "OPTIONS"
+ .TP 
+@@ -102,7 +102,7 @@ IPMI v2.0 specification. The default is
+ authentication, HMAC\-SHA256\-128 integrity, and AES\-CBC\-128 encryption algorithms.
+ 
+ NOTE: In
+-.BR ipmitool
++.br ipmitool
+ 1.8.18 and earlier the default was 3, which was insecure and was not supported
+ by some more recent BMC implementations.
+ .TP 
+@@ -242,7 +242,7 @@ Change Size of Communication Channel. (O
+ 
+ .LP 
+ If no password method is specified then
+-.BR ipmitool
++.br ipmitool
+ will prompt the user for a password. If no password is entered at the prompt,
+ the remote server password will default to NULL.
+ .SH "SECURITY"
+@@ -267,17 +267,17 @@ local station.
+ For IPMI v1.5, the maximum password length is 16 characters; longer
+ passwords might be truncated or rejected by the server, or rejected
+ by
+-.BR ipmitool .
++.br ipmitool .
+ 
+ For IPMI v2.0, the maximum password length is 20 characters; longer
+ passwords will be rejected by
+-.BR ipmitool .
++.br ipmitool .
+ 
+ .SH "COMMANDS"
+ .TP 
+ \fIhelp\fP
+ This can be used to get command\-line help on 
+-.BR ipmitool
++.br ipmitool
+ commands. It may also be placed at the end of commands to get option usage help.
+ 
+ > ipmitool help
+@@ -1223,7 +1223,7 @@ Get a list of all the possible Sensor St
+ Shortcuts available for a particular sensor.   \fBsensorid\fR is the character 
+ string representation of the sensor and must be enclosed in double quotes
+ if it includes white space.  Several different commands including 
+-.BR ipmitool
++.br ipmitool
+ \fIsensor list\fP may be used to obtain a list that includes 
+ the \fBsensorid\fR strings representing the sensors on a given system. 
+ .RS
+@@ -1287,7 +1287,7 @@ Finding sensor PS 2T Fan Fault... ok
+ 
+ .RS
+ Execute
+-.BR ipmitool
++.br ipmitool
+ commands from \fIfilename\fR.  Each line is a
+ complete command.  The syntax of the commands are defined by the
+ COMMANDS section in this manpage.  Each line may have an optional
+@@ -1698,7 +1698,7 @@ user, operator, admin, oem.
+ .br
+ 
+ Causes
+-.BR ipmitool
++.br ipmitool
+ to enter Intel IPMI v1.5 Serial Over LAN mode. An RMCP+
+ connection is made to the BMC, the terminal is set to raw mode, and user
+ input is sent to the serial console on the remote server. On exit, 
+@@ -1752,7 +1752,7 @@ Select the next boot order on the Kontro
+ 
+ These commands will allow you to configure IPMI LAN channels
+ with network information so they can be used with the
+-..BR ipmitool
++.br ipmitool
+ \fIlan\fP and \fIlanplus\fP interfaces.  \fINOTE\fR: To
+ determine on which channel the LAN interface is located, issue
+ the `channel info \fInumber\fR' command until you come across
+@@ -2035,7 +2035,7 @@ Display the Management Controller Global
+ .br
+ 
+ This is the default behavior for
+-.BR ipmitool (1).
++.br ipmitool (1).
+ 
+ Try to automatically detect the encoding based on the value of the
+ version field and (for version 1) the timestamp. The version is
+@@ -2049,11 +2049,11 @@ neither one has that, then the precedenc
+ \fIsmbios\fP, \fIipmi\fP, \fIrfc4122\fP.
+ 
+ If neither encoding yields a valid version field, then
+-.BR ipmitool (1)
++.br ipmitool (1)
+ defaults to \fIdump\fP mode.
+ 
+ If this option is in use, then
+-.BR ipmitool (1)
++.br ipmitool (1)
+ will also print out the detected encoding and warn
+ regarding IPMI specification violation if the encoding isn't \fIipmi\fP.
+ 
+@@ -2551,7 +2551,7 @@ Discover Node Manager presence as well a
+ .br
+ 
+ Add a new power policy, or overwrite an existing policy.
+-The \fIcorrection\fP parameter is the agressiveness of frequency limiting, default is auto.
++The \fIcorrection\fP parameter is the aggressiveness of frequency limiting, default is auto.
+ The \fItrig_lim\fP is the correction time limit and must be at least 6000 and not greater than 65535.
+ The \fIstats\fP setting is the averaging period in seconds and ranges from 1-65535.
+ If domain is not supplied a default of platform is used.
+@@ -2562,7 +2562,7 @@ If domain is not supplied a default of p
+ .br
+ 
+ Add a new inlet temp policy, or overwrite an existing policy.
+-The \fIcorrection\fP parameter is the agressiveness of frequency limiting, default is auto.
++The \fIcorrection\fP parameter is the aggressiveness of frequency limiting, default is auto.
+ The \fItrig_lim\fP is the correction time limit and must be at least 6000 and not greater than 65535.
+ The \fIstats\fP setting is the averaging period in seconds and ranges from 1-65535.
+ If domain is not supplied a default of platform is used.
+@@ -2960,7 +2960,7 @@ A list of all entity ids can be found in
+ Dumps raw SDR data to a file.  This data file can then be used as
+ a local SDR cache of the remote managed system with the \fI\-S <file>\fP
+ option on the
+-.BR ipmitool
++.br ipmitool
+ command line.  This can greatly improve performance
+ over system interface or remote LAN.
+ .TP 
+@@ -3045,7 +3045,7 @@ Print information on the specified SEL R
+ 
+ Save SEL records to a text file that can be fed back into the
+ \fIevent file\fP
+-.BR ipmitool
++.br ipmitool
+ command. This can be useful for
+ testing Event generation by building an appropriate Platform
+ Event Message file based on existing events.  Please see the
+@@ -3056,14 +3056,14 @@ the format of this file.
+ 
+ Save SEL records to a file in raw, binary format.  This file can
+ be fed back to the \fIsel readraw\fP
+-.BR ipmitool
++.br ipmitool
+ command for viewing.
+ .TP 
+ \fIreadraw\fP <\fBfile\fR>
+ 
+ Read and display SEL records from a binary file.  Such a file can
+ be created using the \fIsel writeraw\fP
+-.BR ipmitool
++.br ipmitool
+ command.
+ .TP          
+ \fItime\fP
+@@ -3194,10 +3194,10 @@ Verbosity level.
+ .RS
+ This command will launch an interactive shell which you can use
+ to send multiple 
+-.BR ipmitool
++.br ipmitool
+ commands to a BMC and see the responses. This can be useful instead of
+ running the full
+-.BR ipmitool
++.br ipmitool
+ command each time. Some commands will make use of a Sensor Data Record cache
+ and you will see marked improvement in speed if these commands
+ are able to reuse the same cache in a shell session.  LAN sessions
+@@ -3275,7 +3275,7 @@ by the IPMI over serial channel.
+ .br 
+ 
+ Causes
+-.BR ipmitool
++.br ipmitool
+ to enter Serial Over LAN
+ mode, and is only available when using the lanplus
+ interface.  An RMCP+ connection is made to the BMC,
+@@ -3568,7 +3568,7 @@ Determine whether a password has been st
+ 
+ .SH "OPEN INTERFACE"
+ The
+-.BR ipmitool
++.br ipmitool
+ \fIopen\fP interface utilizes the OpenIPMI
+ kernel device driver.  This driver is present in all modern
+ 2.4 and all 2.6 kernels and it should be present in recent
+@@ -3579,7 +3579,7 @@ the OpenIPMI homepage.
+ The required kernel modules is different for 2.4 and 2.6
+ kernels.  The following kernel modules must be loaded on
+ a 2.4\-based kernel in order for
+-.BR ipmitool
++.br ipmitool
+ to work:
+ .TP 
+ .B ipmi_msghandler
+@@ -3593,7 +3593,7 @@ Linux character device interface for the
+ .LP 
+ The following kernel modules must be loaded on
+ a 2.6\-based kernel in order for
+-.BR ipmitool
++.br ipmitool
+ to work:
+ .TP 
+ .B ipmi_msghandler
+@@ -3622,12 +3622,12 @@ entry with:
+ 
+ .I mknod /dev/ipmi0 c 254 0
+ 
+-.BR ipmitool
++.br ipmitool
+ includes some sample initialization scripts that
+ can perform this task automatically at start\-up.
+ 
+ In order to have
+-.BR ipmitool
++.br ipmitool
+ use the OpenIPMI device interface
+ you can specify it on the command line:
+ .PP 
+@@ -3652,16 +3652,16 @@ The following files are associated with
+ Character device node used to communicate with the bmc driver.
+ .SH "LIPMI INTERFACE"
+ The
+-.BR ipmitool
++.br ipmitool
+ \fIlipmi\fP interface uses the Solaris 9 IPMI kernel device driver.
+ It has been superceeded by the \fIbmc\fP interface on Solaris 10.  You can tell
+-.BR ipmitool
++.br ipmitool
+ to use this interface by specifying it on the command line.
+ 
+ > ipmitool \fB\-I\fR \fIlipmi\fP <\fIexpression\fP>
+ .SH "LAN INTERFACE"
+ The
+-.BR ipmitool
++.br ipmitool
+ \fIlan\fP interface communicates with the BMC
+ over an Ethernet LAN connection using UDP under IPv4.  UDP
+ datagrams are formatted to contain IPMI request/response 
+@@ -3676,12 +3676,12 @@ The LAN interface is an authentication m
+ messages delivered to the BMC can (and should) be authenticated
+ with a challenge/response protocol with either straight
+ password/key or MD5 message\-digest algorithm.
+-.BR ipmitool
++.br ipmitool
+ will attempt to connect with administrator privilege level as this
+ is required to perform chassis power functions.
+ 
+ You can tell
+-.BR ipmitool
++.br ipmitool
+ to use the lan interface with the
+ \fB\-I\fR \fIlan\fP option:
+ 
+@@ -3692,7 +3692,7 @@ to use the lan interface with the
+ A hostname must be given on the command line in order to use the 
+ lan interface with \fBipmitool\fR. The password field is optional;
+ if you do not provide a password on the command line,
+-.BR ipmitool
++.br ipmitool
+ will attempt to connect without authentication.  If you specify a 
+ password it will use MD5 authentication if supported by the BMC
+ and straight password/key otherwise, unless overridden with a
+@@ -3706,14 +3706,14 @@ specification.  RMCP+ allows for improve
+ integrity checks, as well as encryption and the ability to carry
+ multiple types of payloads.  Generic Serial Over LAN support 
+ requires RMCP+, so the
+-.BR ipmitool
++.br ipmitool
+ \fIsol activate\fP command
+ requires the use of the \fIlanplus\fP interface.
+ 
+ RMCP+ session establishment uses a symmetric challenge\-response
+ protocol called RAKP (\fBRemote Authenticated Key\-Exchange Protocol\fR)
+ which allows the negotiation of many options.
+-.BR ipmitool
++.br ipmitool
+ does not
+ yet allow the user to specify the value of every option, defaulting
+ to the most obvious settings marked as required in the v2.0 
+@@ -3721,14 +3721,14 @@ specification.  Authentication and integ
+ SHA1, and encryption is performed with AES\-CBC\-128.  Role\-level logins
+ are not yet supported.
+ 
+-.BR ipmitool
++.br ipmitool
+ must be linked with the \fIOpenSSL\fP library in order to
+ perform the encryption functions and support the \fIlanplus\fP
+ interface.  If the required packages are not found it will not be
+ compiled in and supported.
+ 
+ You can tell
+-.BR ipmitool
++.br ipmitool
+ to use the lanplus interface with the
+ \fB\-I\fR \fIlanplus\fP option:
+ 
+@@ -3749,17 +3749,17 @@ and encryption algorithms to use for for
+ on the cipher suite ID found in the IPMIv2.0 specification in table
+ 22\-20.  The default cipher suite is \fI17\fP which specifies
+ RAKP\-HMAC\-SHA256 authentication, HMAC\-SHA256\-128 integrity, and 
+-AES\-CBC\-128 encryption algorightms.
++AES\-CBC\-128 encryption algorithms.
+ 
+ .SH "FREE INTERFACE"
+ .LP
+ The
+-.BR ipmitool
++.br ipmitool
+ \fIfree\fP interface utilizes the FreeIPMI libfreeipmi
+ drivers.  
+ .LP
+ You can tell
+-.BR ipmitool
++.br ipmitool
+ to use the FreeIPMI interface with the \-I option:
+ .PP
+ > ipmitool \fB\-I\fR \fIfree\fP <\fIcommand\fP>
+@@ -3768,12 +3768,12 @@ to use the FreeIPMI interface with the \
+ .SH "IMB INTERFACE"
+ .LP
+ The
+-.BR ipmitool
++.br ipmitool
+ \fIimb\fP interface supports the Intel IMB (Intel
+ Inter-module Bus) Interface through the /dev/imb device.  
+ .LP
+ You can tell
+-.BR ipmitool
++.br ipmitool
+ to use the IMB interface with the \-I option:
+ .PP
+ > ipmitool \fB\-I\fR \fIimb\fP <\fIcommand\fP>
+Index: trunk/doc/ipmievd.8.in
+===================================================================
+--- trunk.orig/doc/ipmievd.8.in
++++ trunk/doc/ipmievd.8.in
+@@ -56,7 +56,7 @@ This is not available with all commands.
+ The remote server authentication, integrity, and encryption algorithms
+ to use for IPMIv2 \fIlanplus\fP connections.  See table 22\-19 in the
+ IPMIv2 specification.  The default is 3 which specifies RAKP\-HMAC\-SHA1 
+-authentication, HMAC\-SHA1\-96 integrity, and AES\-CBC\-128 encryption algorightms.
++authentication, HMAC\-SHA1\-96 integrity, and AES\-CBC\-128 encryption algorithms.
+ .TP 
+ \fB\-E\fR
+ The remote server password is specified by the environment