switch to quilt

1 files changed, 0 insertions, 1857 deletions

diff --git a/debian/patches/20_ipmi_isol.dpatch b/debian/patches/20_ipmi_isol.dpatch
deleted file mode 100644
index 382e62a..0000000
--- a/debian/patches/20_ipmi_isol.dpatch
+++ /dev/null
@@ -1,1857 +0,0 @@
-#! /bin/sh /usr/share/dpatch/dpatch-run
-## 20_ipmi_isol.dpatch by  <mjj29@debian.org>
-##
-## All lines beginning with `## DP:' are a description of the patch.
-## DP: 20_ipmi_isol, closes #412816
-
-@DPATCH@
-
-diff -urN ipmitool-1.8.9.orig/include/ipmitool/ipmi_isol.h ipmitool-1.8.9/include/ipmitool/ipmi_isol.h
---- ipmitool-1.8.9.orig/include/ipmitool/ipmi_isol.h	2007-02-22 08:38:55.000000000 +0000
-+++ ipmitool-1.8.9/include/ipmitool/ipmi_isol.h	2007-12-13 10:16:57.063986495 +0000
-@@ -41,15 +41,16 @@
- 
- #define ISOL_ENABLE_PARAM		0x01
- #define ISOL_AUTHENTICATION_PARAM	0x02
--#define ISOL_ENABLE_FLAG			0x01
--#define ISOL_PRIVILEGE_LEVEL_USER	0x02
-+
- #define ISOL_BAUD_RATE_PARAM		0x05
--#define ISOL_BAUD_RATE_9600		0x06
--#define ISOL_BAUD_RATE_19200		0x07
--#define ISOL_BAUD_RATE_38400		0x08
--#define ISOL_BAUD_RATE_57600		0x09
--#define ISOL_BAUD_RATE_115200		0x0A
--#define ISOL_PREFERRED_BAUD_RATE		0x07
-+
-+#define ISOL_PREFERRED_BAUD_RATE	0x07
-+
-+struct isol_config_parameters {
-+	uint8_t  enabled;
-+	uint8_t  privilege_level;
-+	uint8_t  bit_rate;
-+};
- 
- int ipmi_isol_main(struct ipmi_intf *, int, char **);
- 
-diff -urN ipmitool-1.8.9.orig/include/ipmitool/ipmi_isol.h.orig ipmitool-1.8.9/include/ipmitool/ipmi_isol.h.orig
---- ipmitool-1.8.9.orig/include/ipmitool/ipmi_isol.h.orig	1970-01-01 01:00:00.000000000 +0100
-+++ ipmitool-1.8.9/include/ipmitool/ipmi_isol.h.orig	2007-02-22 08:38:55.000000000 +0000
-@@ -0,0 +1,56 @@
-+/*
-+ * Copyright (c) 2003 Sun Microsystems, Inc.  All Rights Reserved.
-+ * 
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions
-+ * are met:
-+ * 
-+ * Redistribution of source code must retain the above copyright
-+ * notice, this list of conditions and the following disclaimer.
-+ * 
-+ * Redistribution in binary form must reproduce the above copyright
-+ * notice, this list of conditions and the following disclaimer in the
-+ * documentation and/or other materials provided with the distribution.
-+ * 
-+ * Neither the name of Sun Microsystems, Inc. or the names of
-+ * contributors may be used to endorse or promote products derived
-+ * from this software without specific prior written permission.
-+ * 
-+ * This software is provided "AS IS," without a warranty of any kind.
-+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES,
-+ * INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A
-+ * PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY EXCLUDED.
-+ * SUN MICROSYSTEMS, INC. ("SUN") AND ITS LICENSORS SHALL NOT BE LIABLE
-+ * FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING
-+ * OR DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES.  IN NO EVENT WILL
-+ * SUN OR ITS LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA,
-+ * OR FOR DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR
-+ * PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF
-+ * LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE,
-+ * EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
-+ */
-+
-+#ifndef IPMI_ISOL_H
-+#define IPMI_ISOL_H
-+
-+#include <ipmitool/ipmi.h>
-+
-+#define ACTIVATE_ISOL			0x01
-+#define SET_ISOL_CONFIG			0x03
-+#define GET_ISOL_CONFIG			0x04
-+
-+#define ISOL_ENABLE_PARAM		0x01
-+#define ISOL_AUTHENTICATION_PARAM	0x02
-+#define ISOL_ENABLE_FLAG			0x01
-+#define ISOL_PRIVILEGE_LEVEL_USER	0x02
-+#define ISOL_BAUD_RATE_PARAM		0x05
-+#define ISOL_BAUD_RATE_9600		0x06
-+#define ISOL_BAUD_RATE_19200		0x07
-+#define ISOL_BAUD_RATE_38400		0x08
-+#define ISOL_BAUD_RATE_57600		0x09
-+#define ISOL_BAUD_RATE_115200		0x0A
-+#define ISOL_PREFERRED_BAUD_RATE		0x07
-+
-+int ipmi_isol_main(struct ipmi_intf *, int, char **);
-+
-+#endif /* IPMI_SOL_H */
-diff -urN ipmitool-1.8.9.orig/lib/ipmi_isol.c ipmitool-1.8.9/lib/ipmi_isol.c
---- ipmitool-1.8.9.orig/lib/ipmi_isol.c	2007-02-22 08:38:56.000000000 +0000
-+++ ipmitool-1.8.9/lib/ipmi_isol.c	2007-12-13 10:16:57.063986495 +0000
-@@ -32,7 +32,17 @@
- 
- #include <stdlib.h>
- #include <string.h>
-+#include <strings.h>
- #include <stdio.h>
-+#include <sys/types.h>
-+#include <sys/stat.h>
-+#include <sys/select.h>
-+#include <sys/time.h>
-+#include <signal.h>
-+#include <unistd.h>
-+
-+
-+#include <termios.h>
- 
- #include <ipmitool/helper.h>
- #include <ipmitool/log.h>
-@@ -41,39 +51,40 @@
- #include <ipmitool/ipmi_intf.h>
- #include <ipmitool/ipmi_isol.h>
- 
--const struct valstr ipmi_isol_baud_vals[] = {
--	{ ISOL_BAUD_RATE_9600,   "9600" },
--	{ ISOL_BAUD_RATE_19200,  "19200" },
--	{ ISOL_BAUD_RATE_38400,  "38400" },
--	{ ISOL_BAUD_RATE_57600,  "57600" },
--	{ ISOL_BAUD_RATE_115200, "115200" },
--	{ 0x00, NULL }
--};
-+static struct termios _saved_tio;
-+static int            _in_raw_mode = 0;
- 
- extern int verbose;
- 
--static int ipmi_isol_setup(struct ipmi_intf * intf, char baudsetting)
-+#define ISOL_ESCAPE_CHARACTER                    '~'
-+
-+/*
-+ * ipmi_get_isol_info
-+ */
-+static int ipmi_get_isol_info(struct ipmi_intf * intf,
-+			      struct isol_config_parameters * params)
- {
- 	struct ipmi_rs * rsp;
- 	struct ipmi_rq req;
--	unsigned char data[6];	
-+	unsigned char data[6];
- 
--	/* TEST FOR AVAILABILITY */
-+	memset(&req, 0, sizeof(req));
-+	req.msg.netfn = IPMI_NETFN_ISOL;
-+	req.msg.cmd = GET_ISOL_CONFIG;
-+	req.msg.data = data;
-+	req.msg.data_len = 4;
- 
-+	/* GET ISOL ENABLED CONFIG */
-+	
- 	memset(data, 0, 6);
- 	data[0] = 0x00;
- 	data[1] = ISOL_ENABLE_PARAM;
--	data[2] = ISOL_ENABLE_FLAG;
--
--	memset(&req, 0, sizeof(req));
--	req.msg.netfn = IPMI_NETFN_ISOL;
--	req.msg.cmd = SET_ISOL_CONFIG;
--	req.msg.data = data;
--	req.msg.data_len = 3;
-+	data[2] = 0x00;		/* block */
-+	data[3] = 0x00;		/* selector */
- 
- 	rsp = intf->sendrecv(intf, &req);
- 	if (rsp == NULL) {
--		lprintf(LOG_ERR, "Error in Set ISOL Config Command");
-+		lprintf(LOG_ERR, "Error in Get ISOL Config Command");
- 		return -1;
- 	}
- 	if (rsp->ccode == 0xc1) {
-@@ -81,20 +92,19 @@
- 		return -1;
- 	}
- 	if (rsp->ccode > 0) {
--		lprintf(LOG_ERR, "Error in Set ISOL Config Command: %s",
-+		lprintf(LOG_ERR, "Error in Get ISOL Config Command: %s",
- 			val2str(rsp->ccode, completion_code_vals));
- 		return -1;
- 	}
-+	params->enabled = rsp->data[1];
- 
--	/* GET ISOL CONFIG */
--
-+	/* GET ISOL AUTHENTICATON CONFIG */
-+	
- 	memset(data, 0, 6);
- 	data[0] = 0x00;
- 	data[1] = ISOL_AUTHENTICATION_PARAM;
- 	data[2] = 0x00;		/* block */
- 	data[3] = 0x00;		/* selector */
--	req.msg.cmd = GET_ISOL_CONFIG;
--	req.msg.data_len = 4;
- 
- 	rsp = intf->sendrecv(intf, &req);
- 	if (rsp == NULL) {
-@@ -106,86 +116,713 @@
- 			val2str(rsp->ccode, completion_code_vals));
- 		return -1;
- 	}
--
--	if (verbose > 1)
--		printbuf(rsp->data, rsp->data_len, "ISOL Config");
--
--	/* SET ISOL CONFIG - AUTHENTICATION */
--
-+	params->privilege_level = rsp->data[1];
-+	
-+	/* GET ISOL BAUD RATE CONFIG */
-+	
- 	memset(data, 0, 6);
- 	data[0] = 0x00;
--	data[1] = ISOL_AUTHENTICATION_PARAM;
--	data[2] = ISOL_PRIVILEGE_LEVEL_USER | (rsp->data[1] & 0x80);
--	req.msg.cmd = SET_ISOL_CONFIG;
--	req.msg.data_len = 3;
-+	data[1] = ISOL_BAUD_RATE_PARAM;
-+	data[2] = 0x00;		/* block */
-+	data[3] = 0x00;		/* selector */
- 
- 	rsp = intf->sendrecv(intf, &req);
- 	if (rsp == NULL) {
--		lprintf(LOG_ERR, "Error in Set ISOL Config (Authentication) Command");
-+		lprintf(LOG_ERR, "Error in Get ISOL Config Command");
- 		return -1;
- 	}
- 	if (rsp->ccode > 0) {
--		lprintf(LOG_ERR, "Error in Set ISOL Config (Authentication) Command: %s",
-+		lprintf(LOG_ERR, "Error in Get ISOL Config Command: %s",
- 			val2str(rsp->ccode, completion_code_vals));
- 		return -1;
- 	}
-+	params->bit_rate = rsp->data[1];
- 
--	/* SET ISOL CONFIG - BAUD RATE */
-+	return 0;
-+}
- 
--	memset(data, 0, 6);
--	data[0] = 0x00;
--	data[1] = ISOL_BAUD_RATE_PARAM;
--	data[2] = baudsetting;
-+static int ipmi_print_isol_info(struct ipmi_intf * intf)
-+{
-+	struct isol_config_parameters params = {0};
-+	if (ipmi_get_isol_info(intf, &params))
-+		return -1;
-+
-+	if (csv_output)
-+	{
-+		printf("%s,", (params.enabled & 0x1)?"true": "false");
-+		printf("%s,",
-+			   val2str((params.privilege_level & 0xf), ipmi_privlvl_vals));
-+		printf("%s,",
-+			   val2str((params.bit_rate & 0xf), ipmi_bit_rate_vals));
-+	}
-+	else
-+	{
-+		printf("Enabled                         : %s\n",
-+		       (params.enabled & 0x1)?"true": "false");
-+		printf("Privilege Level                 : %s\n",
-+		       val2str((params.privilege_level & 0xf), ipmi_privlvl_vals));
-+		printf("Bit Rate (kbps)                 : %s\n",
-+		       val2str((params.bit_rate & 0xf), ipmi_bit_rate_vals));
-+	}
-+
-+	return 0;
-+}
-+
-+static int ipmi_isol_set_param(struct ipmi_intf * intf,
-+			       const char *param,
-+			       const char *value)
-+{
-+	struct ipmi_rs * rsp;
-+	struct ipmi_rq req;
-+	unsigned char data[6];	
-+	struct isol_config_parameters params = {0};
-+
-+	/* We need other values to complete the request */
-+	if (ipmi_get_isol_info(intf, &params))
-+		return -1;
-+
-+	memset(&req, 0, sizeof(req));
-+	req.msg.netfn = IPMI_NETFN_ISOL;
- 	req.msg.cmd = SET_ISOL_CONFIG;
-+	req.msg.data = data;
- 	req.msg.data_len = 3;
- 
-+	memset(data, 0, 6);
-+	
-+	/*
-+	 * enabled
-+	 */
-+	if (strcmp(param, "enabled") == 0)
-+	{
-+		data[1] = ISOL_ENABLE_PARAM;
-+		if (strcmp(value, "true") == 0)
-+			data[2] = 0x01;
-+		else if (strcmp(value, "false") == 0)
-+			data[2] = 0x00;
-+		else {
-+			lprintf(LOG_ERR, "Invalid value %s for parameter %s",
-+				   value, param);
-+			lprintf(LOG_ERR, "Valid values are true and false");
-+			return -1;
-+		}
-+	}
-+
-+	/*
-+	 * privilege-level
-+	 */
-+	else if (strcmp(param, "privilege-level") == 0)
-+	{
-+		data[1] = ISOL_AUTHENTICATION_PARAM;
-+		if (! strcmp(value, "user"))
-+			data[2] = 0x02;
-+		else if (! strcmp(value, "operator"))
-+			data[2] = 0x03;
-+		else if (! strcmp(value, "admin"))
-+			data[2] = 0x04;
-+		else if (! strcmp(value, "oem"))
-+			data[2] = 0x05;
-+		else
-+		{
-+			lprintf(LOG_ERR, "Invalid value %s for parameter %s",
-+				   value, param);
-+			lprintf(LOG_ERR, "Valid values are user, operator, admin, and oem");
-+			return -1;
-+		}
-+		/* We need to mask bit7 from the fetched value */
-+		data[2] |= (params.privilege_level & 0x80) ? 0x80 : 0x00;
-+	}
-+
-+	/*
-+	 * bit-rate
-+	 */
-+	else if (strcmp(param, "bit-rate") == 0)
-+	{
-+		data[1] = ISOL_BAUD_RATE_PARAM;
-+		if (strncmp(value, "9.6", 3) == 0) {
-+			data[2] = 0x06;
-+		}
-+		else if (strncmp(value, "19.2", 4) == 0) {
-+			data[2] = 0x07;
-+		}
-+		else if (strncmp(value, "38.4", 4) == 0) {
-+			data[2] = 0x08;
-+		}
-+		else if (strncmp(value, "57.6", 4) == 0) {
-+			data[2] = 0x09;
-+		}
-+		else if (strncmp(value, "115.2", 5) == 0) {
-+			data[2] = 0x0A;
-+		}
-+		else {
-+			lprintf(LOG_ERR, "ISOL - Unsupported baud rate: %s", value);
-+			lprintf(LOG_ERR, "Valid values are 9.6, 19.2, 38.4, 57.6 and 115.2");
-+			return -1;
-+		}
-+	}
-+	else
-+	{
-+		lprintf(LOG_ERR, "Error: invalid ISOL parameter %s", param);
-+		return -1;
-+	}
-+	
-+	
-+	/*
-+	 * Execute the request
-+	 */
-+
- 	rsp = intf->sendrecv(intf, &req);
- 	if (rsp == NULL) {
--		lprintf(LOG_ERR, "Error in Set ISOL Config (Baud Rate) Command");
-+		lprintf(LOG_ERR, "Error setting ISOL parameter '%s'", param);
- 		return -1;
- 	}
- 	if (rsp->ccode > 0) {
--		lprintf(LOG_ERR, "Error in Set ISOL Config (Baud Rate) Command: %s",
--			val2str(rsp->ccode, completion_code_vals));
-+		lprintf(LOG_ERR, "Error setting ISOL parameter '%s': %s",
-+			   param, val2str(rsp->ccode, completion_code_vals));
- 		return -1;
- 	}
- 
--	printf("Set ISOL Baud Rate to %s\n",
--	       val2str(baudsetting, ipmi_isol_baud_vals));
-+	return 0;
-+}
-+
-+static void
-+leave_raw_mode(void)
-+{
-+	if (!_in_raw_mode)
-+		return;
-+	if (tcsetattr(fileno(stdin), TCSADRAIN, &_saved_tio) == -1)
-+		perror("tcsetattr");
-+	else
-+		_in_raw_mode = 0;
-+}
-+
-+
-+
-+static void
-+enter_raw_mode(void)
-+{
-+	struct termios tio;
-+	if (tcgetattr(fileno(stdin), &tio) == -1) {
-+		perror("tcgetattr");
-+		return;
-+	}
-+	_saved_tio = tio;
-+	tio.c_iflag |= IGNPAR;
-+	tio.c_iflag &= ~(ISTRIP | INLCR | IGNCR | ICRNL | IXON | IXANY | IXOFF)\
-+		;
-+	tio.c_lflag &= ~(ISIG | ICANON | ECHO | ECHOE | ECHOK | ECHONL);
-+	//	#ifdef IEXTEN
-+	tio.c_lflag &= ~IEXTEN;
-+	//	#endif
-+	tio.c_oflag &= ~OPOST;
-+	tio.c_cc[VMIN] = 1;
-+	tio.c_cc[VTIME] = 0;
-+	if (tcsetattr(fileno(stdin), TCSADRAIN, &tio) == -1)
-+		perror("tcsetattr");
-+	else
-+		_in_raw_mode = 1;
-+}
-+
-+
-+static void
-+sendBreak(struct ipmi_intf * intf)
-+{
-+	struct ipmi_v2_payload  v2_payload;
-+
-+	memset(&v2_payload, 0, sizeof(v2_payload));
-+
-+	v2_payload.payload.sol_packet.character_count = 0;
-+	v2_payload.payload.sol_packet.generate_break  = 1;
-+
-+	intf->send_sol(intf, &v2_payload);
-+}
-+
-+/*
-+ * suspendSelf
-+ *
-+ * Put ourself in the background
-+ *
-+ * param bRestoreTty specifies whether we will put our self back
-+ *       in raw mode when we resume
-+ */
-+static void
-+suspendSelf(int bRestoreTty)
-+{
-+	leave_raw_mode();
-+	kill(getpid(), SIGTSTP);
-+
-+	if (bRestoreTty)
-+		enter_raw_mode();
-+}
-+
-+
-+
-+/*
-+ * printiSolEscapeSequences
-+ *
-+ * Send some useful documentation to the user
-+ */
-+static void
-+printiSolEscapeSequences(void)
-+{
-+	printf(
-+		   "%c?\r\n\
-+	Supported escape sequences:\r\n\
-+	%c.  - terminate connection\r\n\
-+	%c^Z - suspend ipmitool\r\n\
-+	%c^X - suspend ipmitool, but don't restore tty on restart\r\n\
-+	%cB  - send break\r\n\
-+	%c?  - this message\r\n\
-+	%c%c  - send the escape character by typing it twice\r\n\
-+	(Note that escapes are only recognized immediately after newline.)\r\n",
-+		   ISOL_ESCAPE_CHARACTER,
-+		   ISOL_ESCAPE_CHARACTER,
-+		   ISOL_ESCAPE_CHARACTER,
-+		   ISOL_ESCAPE_CHARACTER,
-+		   ISOL_ESCAPE_CHARACTER,
-+		   ISOL_ESCAPE_CHARACTER,
-+		   ISOL_ESCAPE_CHARACTER,
-+		   ISOL_ESCAPE_CHARACTER);
-+}
-+
-+
-+
-+/*
-+ * output
-+ *
-+ * Send the specified data to stdout
-+ */
-+static void
-+output(struct ipmi_rs * rsp)
-+{
-+	if (rsp)
-+	{
-+		int i;
-+		for (i = 0; i < rsp->data_len; ++i)
-+			putc(rsp->data[i], stdout);
-+
-+		fflush(stdout);
-+	}
-+}
-+
-+/*
-+ * ipmi_isol_deactivate
-+ */
-+static int
-+ipmi_isol_deactivate(struct ipmi_intf * intf)
-+{
-+	struct ipmi_rs * rsp;
-+	struct ipmi_rq   req;
-+	uint8_t    data[6];	 
-+	struct isol_config_parameters params;
-+
-+	memset(&req, 0, sizeof(req));
-+	req.msg.netfn = IPMI_NETFN_ISOL;
-+	req.msg.cmd = ACTIVATE_ISOL;
-+	req.msg.data = data;
-+	req.msg.data_len = 5;
- 
-+	memset(data, 0, 6);
-+	data[0] = 0x00; /* Deactivate */
-+	data[1] = 0x00;
-+	data[2] = 0x00;
-+	data[3] = 0x00;
-+	data[5] = 0x00;
-+
-+	rsp = intf->sendrecv(intf, &req);
-+	if (rsp == NULL) {
-+		lprintf(LOG_ERR, "Error deactivating ISOL");
-+		return -1;
-+	}
-+	if (rsp->ccode > 0) {
-+		lprintf(LOG_ERR, "Error deactivating ISOL: %s",
-+			val2str(rsp->ccode, completion_code_vals));
-+		return -1;
-+	}
-+	/* response contain 4 additional bytes : 80 00 32 ff
-+	   Don't know what to use them for yet... */
- 	return 0;
- }
- 
--int ipmi_isol_main(struct ipmi_intf * intf, int argc, char ** argv)
-+/*
-+ * processiSolUserInput
-+ *
-+ * Act on user input into the ISOL session.  The only reason this
-+ * is complicated is that we have to process escape sequences.
-+ *
-+ * return   0 on success
-+ *          1 if we should exit
-+ *        < 0 on error (BMC probably closed the session)
-+ */
-+static int
-+processiSolUserInput(struct ipmi_intf * intf,
-+		    uint8_t * input,
-+		    uint16_t  buffer_length)
- {
--	int ret = 0;
-+	static int escape_pending = 0;
-+	static int last_was_cr    = 1;
-+	struct ipmi_v2_payload v2_payload;
-+	int  length               = 0;
-+	int  retval               = 0;
-+	char ch;
-+	int  i;
-+
-+	memset(&v2_payload, 0, sizeof(v2_payload));
-+	
-+	/*
-+	 * Our first order of business is to check the input for escape
-+	 * sequences to act on.
-+	 */
-+	for (i = 0; i < buffer_length; ++i)
-+	{
-+		ch = input[i];
-+
-+		if (escape_pending){
-+			escape_pending = 0;
-+			
-+			/*
-+			 * Process a possible escape sequence.
-+			 */
-+			switch (ch) {
-+			case '.':
-+				printf("%c. [terminated ipmitool]\r\n", ISOL_ESCAPE_CHARACTER);
-+				retval = 1;
-+				break;
-+			case 'Z' - 64:
-+				printf("%c^Z [suspend ipmitool]\r\n", ISOL_ESCAPE_CHARACTER);
-+				suspendSelf(1); /* Restore tty back to raw */
-+				continue;
-+
-+			case 'X' - 64:
-+				printf("%c^X [suspend ipmitool]\r\n", ISOL_ESCAPE_CHARACTER);
-+				suspendSelf(0); /* Don't restore to raw mode */
-+				continue;
-+
-+			case 'B':
-+				printf("%cb [send break]\r\n", ISOL_ESCAPE_CHARACTER);
-+				sendBreak(intf);
-+				continue;
-+
-+			case '?':
-+				printiSolEscapeSequences();
-+				continue;
-+			default:
-+				if (ch != ISOL_ESCAPE_CHARACTER)
-+					v2_payload.payload.sol_packet.data[length++] =
-+						ISOL_ESCAPE_CHARACTER;
-+				v2_payload.payload.sol_packet.data[length++] = ch;
-+			}
-+		}
- 
--	if (argc < 2 || strncmp(argv[0], "help", 4) == 0) {
--		lprintf(LOG_NOTICE, "ISOL Commands: setup <baud>");
--		lprintf(LOG_NOTICE, "ISOL Baud Rates:  9600, 19200, 38400, 57600, 115200");
--		return 0;
--	}
--		
--	if (strncmp(argv[0], "setup", 5) == 0) {
--		if (strncmp(argv[1], "9600", 4) == 0) {
--			ret = ipmi_isol_setup(intf, ISOL_BAUD_RATE_9600);
--		}
--		else if (strncmp(argv[1], "19200", 5) == 0) {
--			ret = ipmi_isol_setup(intf, ISOL_BAUD_RATE_19200);
-+		else
-+		{
-+			if (last_was_cr && (ch == ISOL_ESCAPE_CHARACTER)) {
-+				escape_pending = 1;
-+				continue;
-+			}
-+
-+			v2_payload.payload.sol_packet.data[length++] =	ch;
- 		}
--		else if (strncmp(argv[1], "38400", 5) == 0) {
--			ret = ipmi_isol_setup(intf, ISOL_BAUD_RATE_38400);
-+
-+
-+		/*
-+		 * Normal character.  Record whether it was a newline.
-+		 */
-+		last_was_cr = (ch == '\r' || ch == '\n');
-+	}
-+
-+	/*
-+	 * If there is anything left to process we dispatch it to the BMC,
-+	 * send intf->session->sol_data.max_outbound_payload_size bytes
-+	 * at a time.
-+	 */
-+	if (length)
-+	{
-+		struct ipmi_rs * rsp;
-+
-+		v2_payload.payload.sol_packet.flush_outbound = 1; /* Not sure if necessary ? */
-+		v2_payload.payload.sol_packet.character_count = length;
-+		rsp = intf->send_sol(intf, &v2_payload);
-+
-+		if (! rsp) {
-+			lprintf(LOG_ERR, "Error sending SOL data");
-+			retval = -1;
- 		}
--		else if (strncmp(argv[1], "57600", 5) == 0) {
--			ret = ipmi_isol_setup(intf, ISOL_BAUD_RATE_57600);
-+
-+		/* If the sequence number is set we know we have new data */
-+		else if ((rsp->session.payloadtype == IPMI_PAYLOAD_TYPE_SOL)        &&
-+			 (rsp->payload.sol_packet.packet_sequence_number))
-+			output(rsp);
-+	}
-+	return retval;
-+}
-+
-+/*
-+ * ipmi_isol_red_pill
-+ */
-+static int
-+ipmi_isol_red_pill(struct ipmi_intf * intf)
-+{
-+	char   * buffer;
-+	int    numRead;
-+	int    bShouldExit       = 0;
-+	int    bBmcClosedSession = 0;
-+	fd_set read_fds;
-+	struct timeval tv;
-+	int    retval;
-+	int    buffer_size = 255;
-+	int    timedout = 0;
-+
-+	buffer = (char*)malloc(buffer_size);
-+	if (buffer == NULL) {
-+		lprintf(LOG_ERR, "ipmitool: malloc failure");
-+		return -1;
-+	}
-+
-+	enter_raw_mode();
-+
-+	while (! bShouldExit)
-+	{
-+		FD_ZERO(&read_fds);
-+		FD_SET(0, &read_fds);
-+		FD_SET(intf->fd, &read_fds);
-+
-+		/* Wait up to half a second */
-+		tv.tv_sec =  0;
-+		tv.tv_usec = 500000;
-+
-+		retval = select(intf->fd + 1, &read_fds, NULL, NULL, &tv);
-+
-+		if (retval)
-+		{
-+			if (retval == -1)
-+			{
-+				/* ERROR */
-+				perror("select");
-+				return -1;
-+			}
-+
-+			timedout = 0;
-+
-+			/*
-+			 * Process input from the user
-+			 */
-+			if (FD_ISSET(0, &read_fds))
-+	 		{
-+				bzero(buffer, sizeof(buffer));
-+				numRead = read(fileno(stdin),
-+							   buffer,
-+							   buffer_size);
-+				
-+				if (numRead > 0)
-+				{
-+					int rc = processiSolUserInput(intf, buffer, numRead);
-+					
-+					if (rc)
-+					{
-+						if (rc < 0)
-+							bShouldExit = bBmcClosedSession = 1;
-+						else
-+							bShouldExit = 1;
-+					}
-+				}
-+				else
-+				{
-+					bShouldExit = 1;
-+				}
-+			}
-+
-+
-+			/*
-+			 * Process input from the BMC
-+			 */
-+			else if (FD_ISSET(intf->fd, &read_fds))
-+			{
-+				struct ipmi_rs * rs = intf->recv_sol(intf);
-+				if (! rs)
-+				{
-+					bShouldExit = bBmcClosedSession = 1;
-+				}
-+				else
-+					output(rs);
-+ 			}
-+
-+			
-+			/*
-+			 * ERROR in select
-+			 */
-+ 			else
-+			{
-+				lprintf(LOG_ERR, "Error: Select returned with nothing to read");
-+				bShouldExit = 1;
-+			}
- 		}
--		else if (strncmp(argv[1], "115200", 6) == 0) {
--			ret = ipmi_isol_setup(intf, ISOL_BAUD_RATE_115200);
-+		else
-+		{
-+			if ((++timedout) == 20) /* Every 10 seconds we send a keepalive */
-+			{
-+				intf->keepalive(intf);
-+				timedout = 0;
-+			}
- 		}
--		else {
--			lprintf(LOG_ERR, "ISOL - Unsupported baud rate: %s", argv[1]);
--			ret = -1;
-+	}		
-+
-+	leave_raw_mode();
-+
-+	if (bBmcClosedSession)
-+	{
-+		lprintf(LOG_ERR, "SOL session closed by BMC");
-+	}
-+	else
-+		ipmi_isol_deactivate(intf);
-+
-+	return 0;
-+}
-+
-+/*
-+ * ipmi_isol_activate
-+ */
-+static int
-+ipmi_isol_activate(struct ipmi_intf * intf)
-+{
-+	struct ipmi_rs * rsp;
-+	struct ipmi_rq   req;
-+	uint8_t    data[6];	 
-+	struct isol_config_parameters params;
-+
-+	if (ipmi_get_isol_info(intf, &params))
-+		return -1;
-+
-+	if (!(params.enabled & 0x1)) {
-+		lprintf(LOG_ERR, "ISOL is not enabled!");
-+		return -1;
-+	}
-+
-+	/*
-+	 * Setup a callback so that the lanplus processing knows what
-+	 * to do with packets that come unexpectedly (while waiting for
-+	 * an ACK, perhaps.
-+	 */
-+	intf->session->sol_data.sol_input_handler = output;
-+	
-+	memset(&req, 0, sizeof(req));
-+	req.msg.netfn = IPMI_NETFN_ISOL;
-+	req.msg.cmd = ACTIVATE_ISOL;
-+	req.msg.data = data;
-+	req.msg.data_len = 5;
-+
-+	memset(data, 0, 6);
-+	data[0] = 0x01;
-+	data[1] = 0x00;
-+	data[2] = 0x00;
-+	data[3] = 0x00;
-+	data[5] = 0x00;
-+
-+	rsp = intf->sendrecv(intf, &req);
-+	if (NULL != rsp) {
-+		switch (rsp->ccode) {
-+			case 0x00: 
-+				if (rsp->data_len == 4) {
-+					break;
-+				} else {
-+					lprintf(LOG_ERR, "Error: Unexpected data length (%d) received "
-+						   "in ISOL activation response",
-+						   rsp->data_len);
-+					return -1;
-+				}
-+				break;
-+			case 0x80:
-+				lprintf(LOG_ERR, "Info: ISOL already active on another session");
-+				return -1;
-+			case 0x81:
-+				lprintf(LOG_ERR, "Info: ISOL disabled");
-+				return -1;
-+			case 0x82:
-+				lprintf(LOG_ERR, "Info: ISOL activation limit reached");
-+				return -1;
-+			default:
-+				lprintf(LOG_ERR, "Error activating ISOL: %s",
-+					val2str(rsp->ccode, completion_code_vals));
-+				return -1;
-+		}				
-+	} else {
-+		lprintf(LOG_ERR, "Error: No response activating ISOL");
-+		return -1;
-+	}
-+
-+	/* response contain 4 additional bytes : 80 01 32 ff
-+	   Don't know what to use them for yet... */
-+
-+	printf("[SOL Session operational.  Use %c? for help]\r\n",
-+	       ISOL_ESCAPE_CHARACTER);
-+
-+	/*
-+	 * At this point we are good to go with our SOL session.  We
-+	 * need to listen to
-+	 * 1) STDIN for user input
-+	 * 2) The FD for incoming SOL packets
-+	 */
-+	if (ipmi_isol_red_pill(intf)) {
-+		lprintf(LOG_ERR, "Error in SOL session");
-+		return -1;
-+	}
-+
-+	return 0;
-+}
-+
-+static void print_isol_set_usage(void) {
-+	lprintf(LOG_NOTICE, "\nISOL set parameters and values: \n");
-+	lprintf(LOG_NOTICE, "  enabled                     true | false");
-+	lprintf(LOG_NOTICE, "  privilege-level             user | operator | admin | oem");
-+	lprintf(LOG_NOTICE, "  bit-rate                    "
-+		"9.6 | 19.2 | 38.4 | 57.6 | 115.2");
-+	lprintf(LOG_NOTICE, "");
-+}
-+
-+static void print_isol_usage(void) {
-+	lprintf(LOG_NOTICE, "ISOL Commands: info");
-+	lprintf(LOG_NOTICE, "               set <parameter> <setting>");
-+	lprintf(LOG_NOTICE, "               activate");
-+}
-+
-+int ipmi_isol_main(struct ipmi_intf * intf, int argc, char ** argv)
-+{
-+	int ret = 0;
-+
-+	/*
-+	 * Help
-+	 */
-+	if (!argc || !strncmp(argv[0], "help", 4))
-+		print_isol_usage();
-+
-+	/*
-+	 * Info
-+	 */
-+	else if (!strncmp(argv[0], "info", 4)) {
-+		ret = ipmi_print_isol_info(intf);
-+	}
-+
-+	/*
-+	 * Set a parameter value
-+	 */
-+	else if (!strncmp(argv[0], "set", 3)) {
-+		if (argc < 3) {
-+			print_isol_set_usage();
-+			return -1;
- 		}
-+		ret = ipmi_isol_set_param(intf, argv[1], argv[2]);
-+	}
-+
-+	/*
-+	 * Activate
-+	 */
-+ 	else if (!strncmp(argv[0], "activate", 8)) {
-+		ret = ipmi_isol_activate(intf);
-+	}
-+	
-+	else {
-+		print_isol_usage();
-+		ret = -1;
- 	}
-+	
- 	return ret;
- }
-diff -urN ipmitool-1.8.9.orig/lib/ipmi_isol.c.orig ipmitool-1.8.9/lib/ipmi_isol.c.orig
---- ipmitool-1.8.9.orig/lib/ipmi_isol.c.orig	1970-01-01 01:00:00.000000000 +0100
-+++ ipmitool-1.8.9/lib/ipmi_isol.c.orig	2007-02-22 08:38:56.000000000 +0000
-@@ -0,0 +1,191 @@
-+/*
-+ * Copyright (c) 2003 Sun Microsystems, Inc.  All Rights Reserved.
-+ * 
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions
-+ * are met:
-+ * 
-+ * Redistribution of source code must retain the above copyright
-+ * notice, this list of conditions and the following disclaimer.
-+ * 
-+ * Redistribution in binary form must reproduce the above copyright
-+ * notice, this list of conditions and the following disclaimer in the
-+ * documentation and/or other materials provided with the distribution.
-+ * 
-+ * Neither the name of Sun Microsystems, Inc. or the names of
-+ * contributors may be used to endorse or promote products derived
-+ * from this software without specific prior written permission.
-+ * 
-+ * This software is provided "AS IS," without a warranty of any kind.
-+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES,
-+ * INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A
-+ * PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY EXCLUDED.
-+ * SUN MICROSYSTEMS, INC. ("SUN") AND ITS LICENSORS SHALL NOT BE LIABLE
-+ * FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING
-+ * OR DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES.  IN NO EVENT WILL
-+ * SUN OR ITS LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA,
-+ * OR FOR DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR
-+ * PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF
-+ * LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE,
-+ * EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
-+ */
-+
-+#include <stdlib.h>
-+#include <string.h>
-+#include <stdio.h>
-+
-+#include <ipmitool/helper.h>
-+#include <ipmitool/log.h>
-+#include <ipmitool/ipmi.h>
-+#include <ipmitool/ipmi_strings.h>
-+#include <ipmitool/ipmi_intf.h>
-+#include <ipmitool/ipmi_isol.h>
-+
-+const struct valstr ipmi_isol_baud_vals[] = {
-+	{ ISOL_BAUD_RATE_9600,   "9600" },
-+	{ ISOL_BAUD_RATE_19200,  "19200" },
-+	{ ISOL_BAUD_RATE_38400,  "38400" },
-+	{ ISOL_BAUD_RATE_57600,  "57600" },
-+	{ ISOL_BAUD_RATE_115200, "115200" },
-+	{ 0x00, NULL }
-+};
-+
-+extern int verbose;
-+
-+static int ipmi_isol_setup(struct ipmi_intf * intf, char baudsetting)
-+{
-+	struct ipmi_rs * rsp;
-+	struct ipmi_rq req;
-+	unsigned char data[6];	
-+
-+	/* TEST FOR AVAILABILITY */
-+
-+	memset(data, 0, 6);
-+	data[0] = 0x00;
-+	data[1] = ISOL_ENABLE_PARAM;
-+	data[2] = ISOL_ENABLE_FLAG;
-+
-+	memset(&req, 0, sizeof(req));
-+	req.msg.netfn = IPMI_NETFN_ISOL;
-+	req.msg.cmd = SET_ISOL_CONFIG;
-+	req.msg.data = data;
-+	req.msg.data_len = 3;
-+
-+	rsp = intf->sendrecv(intf, &req);
-+	if (rsp == NULL) {
-+		lprintf(LOG_ERR, "Error in Set ISOL Config Command");
-+		return -1;
-+	}
-+	if (rsp->ccode == 0xc1) {
-+		lprintf(LOG_ERR, "IPMI v1.5 Serial Over Lan (ISOL) not supported!");
-+		return -1;
-+	}
-+	if (rsp->ccode > 0) {
-+		lprintf(LOG_ERR, "Error in Set ISOL Config Command: %s",
-+			val2str(rsp->ccode, completion_code_vals));
-+		return -1;
-+	}
-+
-+	/* GET ISOL CONFIG */
-+
-+	memset(data, 0, 6);
-+	data[0] = 0x00;
-+	data[1] = ISOL_AUTHENTICATION_PARAM;
-+	data[2] = 0x00;		/* block */
-+	data[3] = 0x00;		/* selector */
-+	req.msg.cmd = GET_ISOL_CONFIG;
-+	req.msg.data_len = 4;
-+
-+	rsp = intf->sendrecv(intf, &req);
-+	if (rsp == NULL) {
-+		lprintf(LOG_ERR, "Error in Get ISOL Config Command");
-+		return -1;
-+	}
-+	if (rsp->ccode > 0) {
-+		lprintf(LOG_ERR, "Error in Get ISOL Config Command: %s",
-+			val2str(rsp->ccode, completion_code_vals));
-+		return -1;
-+	}
-+
-+	if (verbose > 1)
-+		printbuf(rsp->data, rsp->data_len, "ISOL Config");
-+
-+	/* SET ISOL CONFIG - AUTHENTICATION */
-+
-+	memset(data, 0, 6);
-+	data[0] = 0x00;
-+	data[1] = ISOL_AUTHENTICATION_PARAM;
-+	data[2] = ISOL_PRIVILEGE_LEVEL_USER | (rsp->data[1] & 0x80);
-+	req.msg.cmd = SET_ISOL_CONFIG;
-+	req.msg.data_len = 3;
-+
-+	rsp = intf->sendrecv(intf, &req);
-+	if (rsp == NULL) {
-+		lprintf(LOG_ERR, "Error in Set ISOL Config (Authentication) Command");
-+		return -1;
-+	}
-+	if (rsp->ccode > 0) {
-+		lprintf(LOG_ERR, "Error in Set ISOL Config (Authentication) Command: %s",
-+			val2str(rsp->ccode, completion_code_vals));
-+		return -1;
-+	}
-+
-+	/* SET ISOL CONFIG - BAUD RATE */
-+
-+	memset(data, 0, 6);
-+	data[0] = 0x00;
-+	data[1] = ISOL_BAUD_RATE_PARAM;
-+	data[2] = baudsetting;
-+	req.msg.cmd = SET_ISOL_CONFIG;
-+	req.msg.data_len = 3;
-+
-+	rsp = intf->sendrecv(intf, &req);
-+	if (rsp == NULL) {
-+		lprintf(LOG_ERR, "Error in Set ISOL Config (Baud Rate) Command");
-+		return -1;
-+	}
-+	if (rsp->ccode > 0) {
-+		lprintf(LOG_ERR, "Error in Set ISOL Config (Baud Rate) Command: %s",
-+			val2str(rsp->ccode, completion_code_vals));
-+		return -1;
-+	}
-+
-+	printf("Set ISOL Baud Rate to %s\n",
-+	       val2str(baudsetting, ipmi_isol_baud_vals));
-+
-+	return 0;
-+}
-+
-+int ipmi_isol_main(struct ipmi_intf * intf, int argc, char ** argv)
-+{
-+	int ret = 0;
-+
-+	if (argc < 2 || strncmp(argv[0], "help", 4) == 0) {
-+		lprintf(LOG_NOTICE, "ISOL Commands: setup <baud>");
-+		lprintf(LOG_NOTICE, "ISOL Baud Rates:  9600, 19200, 38400, 57600, 115200");
-+		return 0;
-+	}
-+		
-+	if (strncmp(argv[0], "setup", 5) == 0) {
-+		if (strncmp(argv[1], "9600", 4) == 0) {
-+			ret = ipmi_isol_setup(intf, ISOL_BAUD_RATE_9600);
-+		}
-+		else if (strncmp(argv[1], "19200", 5) == 0) {
-+			ret = ipmi_isol_setup(intf, ISOL_BAUD_RATE_19200);
-+		}
-+		else if (strncmp(argv[1], "38400", 5) == 0) {
-+			ret = ipmi_isol_setup(intf, ISOL_BAUD_RATE_38400);
-+		}
-+		else if (strncmp(argv[1], "57600", 5) == 0) {
-+			ret = ipmi_isol_setup(intf, ISOL_BAUD_RATE_57600);
-+		}
-+		else if (strncmp(argv[1], "115200", 6) == 0) {
-+			ret = ipmi_isol_setup(intf, ISOL_BAUD_RATE_115200);
-+		}
-+		else {
-+			lprintf(LOG_ERR, "ISOL - Unsupported baud rate: %s", argv[1]);
-+			ret = -1;
-+		}
-+	}
-+	return ret;
-+}
-diff -urN ipmitool-1.8.9.orig/src/plugins/lan/lan.c ipmitool-1.8.9/src/plugins/lan/lan.c
---- ipmitool-1.8.9.orig/src/plugins/lan/lan.c	2007-02-22 08:38:57.000000000 +0000
-+++ ipmitool-1.8.9/src/plugins/lan/lan.c	2007-12-13 10:16:57.063986495 +0000
-@@ -79,6 +79,11 @@
- static struct ipmi_rs * ipmi_lan_poll_recv(struct ipmi_intf * intf);
- static int ipmi_lan_setup(struct ipmi_intf * intf);
- static int ipmi_lan_keepalive(struct ipmi_intf * intf);
-+static struct ipmi_rs * ipmi_lan_send_payload(struct ipmi_intf * intf,
-+ 					      struct ipmi_v2_payload * payload);
-+static struct ipmi_rs * ipmi_lan_recv_sol(struct ipmi_intf * intf);
-+static struct ipmi_rs * ipmi_lan_send_sol(struct ipmi_intf * intf,
-+					  struct ipmi_v2_payload * payload);
- static struct ipmi_rs * ipmi_lan_send_cmd(struct ipmi_intf * intf, struct ipmi_rq * req);
- static int ipmi_lan_send_rsp(struct ipmi_intf * intf, struct ipmi_rs * rsp);
- static int ipmi_lan_open(struct ipmi_intf * intf);
-@@ -93,6 +98,8 @@
- 	close:		ipmi_lan_close,
- 	sendrecv:	ipmi_lan_send_cmd,
- 	sendrsp:	ipmi_lan_send_rsp,
-+	recv_sol:	ipmi_lan_recv_sol,
-+	send_sol:	ipmi_lan_send_sol,
- 	keepalive:	ipmi_lan_keepalive,
- 	target_addr:	IPMI_BMC_SLAVE_ADDR,
- };
-@@ -456,80 +463,141 @@
- 		memcpy(&rsp->session.id, rsp->data+x, 4);
- 		x += 4;
- 
--		if (intf->session->active && (rsp->session.authtype || intf->session->authtype))
--			x += 16;
--
--		rsp->session.msglen = rsp->data[x++];
--		rsp->payload.ipmi_response.rq_addr = rsp->data[x++];
--		rsp->payload.ipmi_response.netfn   = rsp->data[x] >> 2;
--		rsp->payload.ipmi_response.rq_lun  = rsp->data[x++] & 0x3;
--		x++;		/* checksum */
--		rsp->payload.ipmi_response.rs_addr = rsp->data[x++];
--		rsp->payload.ipmi_response.rq_seq  = rsp->data[x] >> 2;
--		rsp->payload.ipmi_response.rs_lun  = rsp->data[x++] & 0x3;
--		rsp->payload.ipmi_response.cmd     = rsp->data[x++];
--		rsp->ccode          = rsp->data[x++];
--
--		if (verbose > 2)
--			printbuf(rsp->data, rsp->data_len, "ipmi message header");
--
--		lprintf(LOG_DEBUG+1, "<< IPMI Response Session Header");
--		lprintf(LOG_DEBUG+1, "<<   Authtype   : %s",
--		       val2str(rsp->session.authtype, ipmi_authtype_session_vals));
--		lprintf(LOG_DEBUG+1, "<<   Sequence   : 0x%08lx",
--			(long)rsp->session.seq);
--		lprintf(LOG_DEBUG+1, "<<   Session ID : 0x%08lx",
--			(long)rsp->session.id);
--		lprintf(LOG_DEBUG+1, "<< IPMI Response Message Header");
--		lprintf(LOG_DEBUG+1, "<<   Rq Addr    : %02x",
--			rsp->payload.ipmi_response.rq_addr);
--		lprintf(LOG_DEBUG+1, "<<   NetFn      : %02x",
--			rsp->payload.ipmi_response.netfn);
--		lprintf(LOG_DEBUG+1, "<<   Rq LUN     : %01x",
--			rsp->payload.ipmi_response.rq_lun);
--		lprintf(LOG_DEBUG+1, "<<   Rs Addr    : %02x",
--			rsp->payload.ipmi_response.rs_addr);
--		lprintf(LOG_DEBUG+1, "<<   Rq Seq     : %02x",
--			rsp->payload.ipmi_response.rq_seq);
--		lprintf(LOG_DEBUG+1, "<<   Rs Lun     : %01x",
--			rsp->payload.ipmi_response.rs_lun);
--		lprintf(LOG_DEBUG+1, "<<   Command    : %02x",
--			rsp->payload.ipmi_response.cmd);
--		lprintf(LOG_DEBUG+1, "<<   Compl Code : 0x%02x",
--			rsp->ccode);
--
--		/* now see if we have outstanding entry in request list */
--		entry = ipmi_req_lookup_entry(rsp->payload.ipmi_response.rq_seq,
--					      rsp->payload.ipmi_response.cmd);
--		if (entry) {
--			lprintf(LOG_DEBUG+2, "IPMI Request Match found");
--			if ((intf->target_addr != our_address) && bridge_possible) {
--				if ((rsp->data_len) &&
--				    (rsp->payload.ipmi_response.cmd != 0x34)) {
--					printbuf(&rsp->data[x], rsp->data_len-x,
--						 "bridge command response");
--				}
--				/* bridged command: lose extra header */
--				if (rsp->payload.ipmi_response.cmd == 0x34) {
--					if (rsp->data_len == 38) {
--						entry->req.msg.cmd = entry->req.msg.target_cmd;
--						rsp = ipmi_lan_recv_packet(intf);
--						continue;
-+		if (rsp->session.id == (intf->session->session_id + 0x10000000)) {
-+			/* With SOL, authtype is always NONE, so we have no authcode */
-+			rsp->session.payloadtype = IPMI_PAYLOAD_TYPE_SOL;
-+	
-+			rsp->session.msglen = rsp->data[x++];
-+			
-+			rsp->payload.sol_packet.packet_sequence_number =
-+				rsp->data[x++] & 0x0F;
-+
-+			rsp->payload.sol_packet.acked_packet_number =
-+				rsp->data[x++] & 0x0F;
-+
-+			rsp->payload.sol_packet.accepted_character_count =
-+				rsp->data[x++];
-+
-+			rsp->payload.sol_packet.is_nack =
-+				rsp->data[x] & 0x40;
-+
-+			rsp->payload.sol_packet.transfer_unavailable =
-+				rsp->data[x] & 0x20;
-+
-+			rsp->payload.sol_packet.sol_inactive = 
-+				rsp->data[x] & 0x10;
-+
-+			rsp->payload.sol_packet.transmit_overrun =
-+				rsp->data[x] & 0x08;
-+	
-+			rsp->payload.sol_packet.break_detected =
-+				rsp->data[x++] & 0x04;
-+
-+			x++; /* On ISOL there's and additional fifth byte before the data starts */
-+	
-+			lprintf(LOG_DEBUG, "SOL sequence number     : 0x%02x",
-+				rsp->payload.sol_packet.packet_sequence_number);
-+
-+			lprintf(LOG_DEBUG, "SOL acked packet        : 0x%02x",
-+				rsp->payload.sol_packet.acked_packet_number);
-+			
-+			lprintf(LOG_DEBUG, "SOL accepted char count : 0x%02x",
-+				rsp->payload.sol_packet.accepted_character_count);
-+			
-+			lprintf(LOG_DEBUG, "SOL is nack             : %s",
-+				rsp->payload.sol_packet.is_nack? "true" : "false");
-+			
-+			lprintf(LOG_DEBUG, "SOL xfer unavailable    : %s",
-+				rsp->payload.sol_packet.transfer_unavailable? "true" : "false");
-+			
-+			lprintf(LOG_DEBUG, "SOL inactive            : %s",
-+				rsp->payload.sol_packet.sol_inactive? "true" : "false");
-+			
-+			lprintf(LOG_DEBUG, "SOL transmit overrun    : %s",
-+				rsp->payload.sol_packet.transmit_overrun? "true" : "false");
-+			
-+			lprintf(LOG_DEBUG, "SOL break detected      : %s",
-+				rsp->payload.sol_packet.break_detected? "true" : "false");
-+		}
-+		else
-+		{
-+			/* Standard IPMI 1.5 packet */
-+			rsp->session.payloadtype = IPMI_PAYLOAD_TYPE_IPMI;
-+			if (intf->session->active && (rsp->session.authtype || intf->session->authtype))
-+				x += 16;
-+
-+			rsp->session.msglen = rsp->data[x++];
-+			rsp->payload.ipmi_response.rq_addr = rsp->data[x++];
-+			rsp->payload.ipmi_response.netfn   = rsp->data[x] >> 2;
-+			rsp->payload.ipmi_response.rq_lun  = rsp->data[x++] & 0x3;
-+			x++;		/* checksum */
-+			rsp->payload.ipmi_response.rs_addr = rsp->data[x++];
-+			rsp->payload.ipmi_response.rq_seq  = rsp->data[x] >> 2;
-+			rsp->payload.ipmi_response.rs_lun  = rsp->data[x++] & 0x3;
-+			rsp->payload.ipmi_response.cmd     = rsp->data[x++];
-+			rsp->ccode          = rsp->data[x++];
-+			
-+			if (verbose > 2)
-+				printbuf(rsp->data, rsp->data_len, "ipmi message header");
-+			
-+			lprintf(LOG_DEBUG+1, "<< IPMI Response Session Header");
-+			lprintf(LOG_DEBUG+1, "<<   Authtype   : %s",
-+				val2str(rsp->session.authtype, ipmi_authtype_session_vals));
-+			lprintf(LOG_DEBUG+1, "<<   Sequence   : 0x%08lx",
-+				(long)rsp->session.seq);
-+			lprintf(LOG_DEBUG+1, "<<   Session ID : 0x%08lx",
-+				(long)rsp->session.id);
-+			lprintf(LOG_DEBUG+1, "<< IPMI Response Message Header");
-+			lprintf(LOG_DEBUG+1, "<<   Rq Addr    : %02x",
-+				rsp->payload.ipmi_response.rq_addr);
-+			lprintf(LOG_DEBUG+1, "<<   NetFn      : %02x",
-+				rsp->payload.ipmi_response.netfn);
-+			lprintf(LOG_DEBUG+1, "<<   Rq LUN     : %01x",
-+				rsp->payload.ipmi_response.rq_lun);
-+			lprintf(LOG_DEBUG+1, "<<   Rs Addr    : %02x",
-+				rsp->payload.ipmi_response.rs_addr);
-+			lprintf(LOG_DEBUG+1, "<<   Rq Seq     : %02x",
-+				rsp->payload.ipmi_response.rq_seq);
-+			lprintf(LOG_DEBUG+1, "<<   Rs Lun     : %01x",
-+				rsp->payload.ipmi_response.rs_lun);
-+			lprintf(LOG_DEBUG+1, "<<   Command    : %02x",
-+				rsp->payload.ipmi_response.cmd);
-+			lprintf(LOG_DEBUG+1, "<<   Compl Code : 0x%02x",
-+				rsp->ccode);
-+			
-+			/* now see if we have outstanding entry in request list */
-+			entry = ipmi_req_lookup_entry(rsp->payload.ipmi_response.rq_seq,
-+						      rsp->payload.ipmi_response.cmd);
-+			if (entry) {
-+				lprintf(LOG_DEBUG+2, "IPMI Request Match found");
-+				if ((intf->target_addr != our_address) && bridge_possible) {
-+					if ((rsp->data_len) &&
-+					    (rsp->payload.ipmi_response.cmd != 0x34)) {
-+						printbuf(&rsp->data[x], rsp->data_len-x,
-+							 "bridge command response");
-+					}
-+					/* bridged command: lose extra header */
-+					if (rsp->payload.ipmi_response.cmd == 0x34) {
-+						if (rsp->data_len == 38) {
-+							entry->req.msg.cmd = entry->req.msg.target_cmd;
-+							rsp = ipmi_lan_recv_packet(intf);
-+							continue;
-+						}
-+					} else {
-+						//x += sizeof(rsp->payload.ipmi_response);
-+						if (rsp->data[x-1] != 0)
-+							lprintf(LOG_DEBUG, "WARNING: Bridged "
-+								"cmd ccode = 0x%02x",
-+								rsp->data[x-1]);
- 					}
--				} else {
--					//x += sizeof(rsp->payload.ipmi_response);
--					if (rsp->data[x-1] != 0)
--						lprintf(LOG_DEBUG, "WARNING: Bridged "
--							"cmd ccode = 0x%02x",
--						       rsp->data[x-1]);
- 				}
-+				ipmi_req_remove_entry(rsp->payload.ipmi_response.rq_seq,
-+						      rsp->payload.ipmi_response.cmd);
-+			} else {
-+				lprintf(LOG_INFO, "IPMI Request Match NOT FOUND");
-+				rsp = ipmi_lan_recv_packet(intf);
-+				continue;
- 			}
--			ipmi_req_remove_entry(rsp->payload.ipmi_response.rq_seq,
--					      rsp->payload.ipmi_response.cmd);
--		} else {
--			lprintf(LOG_INFO, "IPMI Request Match NOT FOUND");
--			rsp = ipmi_lan_recv_packet(intf);
--			continue;
- 		}
- 
- 		break;
-@@ -537,7 +605,9 @@
- 
- 	/* shift response data to start of array */
- 	if (rsp && rsp->data_len > x) {
--		rsp->data_len -= x + 1;
-+		rsp->data_len -= x;
-+		if (rsp->session.payloadtype == IPMI_PAYLOAD_TYPE_IPMI)
-+			rsp->data_len -= 1; /* We don't want the checksum */
- 		memmove(rsp->data, rsp->data + x, rsp->data_len);
- 		memset(rsp->data + rsp->data_len, 0, IPMI_BUF_SIZE - rsp->data_len);
- 	}
-@@ -553,9 +623,9 @@
-  * |  rmcp.seq          |
-  * |  rmcp.class        |
-  * +--------------------+
-- * |  session.authtype | 9 bytes
-- * |  session.seq   |
-- * |  session.id    |
-+ * |  session.authtype  | 9 bytes
-+ * |  session.seq       |
-+ * |  session.id        |
-  * +--------------------+
-  * | [session.authcode] | 16 bytes (AUTHTYPE != none)
-  * +--------------------+
-@@ -910,6 +980,430 @@
- 	return 0;
- }
- 
-+/*
-+ * IPMI SOL Payload Format
-+ * +--------------------+
-+ * |  rmcp.ver          | 4 bytes
-+ * |  rmcp.__reserved   |
-+ * |  rmcp.seq          |
-+ * |  rmcp.class        |
-+ * +--------------------+
-+ * |  session.authtype  | 9 bytes
-+ * |  session.seq       |
-+ * |  session.id        |
-+ * +--------------------+
-+ * |  message length    | 1 byte
-+ * +--------------------+
-+ * |  sol.seq           | 5 bytes
-+ * |  sol.ack_seq       |
-+ * |  sol.acc_count     |
-+ * |  sol.control       |
-+ * |  sol.__reserved    |
-+ * +--------------------+
-+ * | [request data]     | data_len bytes
-+ * +--------------------+
-+ */
-+uint8_t * ipmi_lan_build_sol_msg(struct ipmi_intf * intf,
-+				 struct ipmi_v2_payload * payload,
-+				 int * llen)
-+{
-+	struct rmcp_hdr rmcp = {
-+		.ver		= RMCP_VERSION_1,
-+		.class		= RMCP_CLASS_IPMI,
-+		.seq		= 0xff,
-+	};
-+	struct ipmi_session * session = intf->session;
-+
-+	/* msg will hold the entire message to be sent */
-+	uint8_t * msg;
-+
-+	int len = 0;
-+
-+	len =	sizeof(rmcp)                                 +  // RMCP Header (4)
-+		10                                           +  // IPMI Session Header
-+		5                                            +  // SOL header
-+		payload->payload.sol_packet.character_count;    // The actual payload
-+
-+	msg = malloc(len);
-+	if (msg == NULL) {
-+		lprintf(LOG_ERR, "ipmitool: malloc failure");
-+		return;
-+	}
-+	memset(msg, 0, len);
-+
-+	/* rmcp header */
-+	memcpy(msg, &rmcp, sizeof(rmcp));
-+	len = sizeof(rmcp);
-+
-+	/* ipmi session header */
-+	msg[len++] = 0; /* SOL is always authtype = NONE */
-+	msg[len++] = session->in_seq & 0xff;
-+	msg[len++] = (session->in_seq >> 8) & 0xff;
-+	msg[len++] = (session->in_seq >> 16) & 0xff;
-+	msg[len++] = (session->in_seq >> 24) & 0xff;
-+
-+	msg[len++] = session->session_id & 0xff;
-+	msg[len++] = (session->session_id >> 8) & 0xff;
-+	msg[len++] = (session->session_id >> 16) & 0xff;
-+	msg[len++] = ((session->session_id >> 24) + 0x10) & 0xff; /* Add 0x10 to MSB for SOL */
-+
-+	msg[len++] = payload->payload.sol_packet.character_count + 5;
-+	
-+	/* sol header */
-+	msg[len++] = payload->payload.sol_packet.packet_sequence_number;
-+	msg[len++] = payload->payload.sol_packet.acked_packet_number;
-+	msg[len++] = payload->payload.sol_packet.accepted_character_count;
-+	msg[len]    = payload->payload.sol_packet.is_nack           ? 0x40 : 0;
-+	msg[len]   |= payload->payload.sol_packet.assert_ring_wor   ? 0x20 : 0;
-+	msg[len]   |= payload->payload.sol_packet.generate_break    ? 0x10 : 0;
-+	msg[len]   |= payload->payload.sol_packet.deassert_cts      ? 0x08 : 0;
-+	msg[len]   |= payload->payload.sol_packet.deassert_dcd_dsr  ? 0x04 : 0;
-+	msg[len]   |= payload->payload.sol_packet.flush_inbound     ? 0x02 : 0;
-+	msg[len++] |= payload->payload.sol_packet.flush_outbound    ? 0x01 : 0;
-+
-+	len++; /* On SOL there's and additional fifth byte before the data starts */
-+
-+	if (payload->payload.sol_packet.character_count) {
-+		/* We may have data to add */
-+		memcpy(msg + len,
-+		       payload->payload.sol_packet.data,
-+		       payload->payload.sol_packet.character_count);
-+		len += payload->payload.sol_packet.character_count;		
-+	}
-+
-+	session->in_seq++;
-+	if (session->in_seq == 0)
-+		session->in_seq++;
-+	
-+	*llen = len;
-+	return msg;
-+}
-+
-+/*
-+ * is_sol_packet
-+ */
-+static int
-+is_sol_packet(struct ipmi_rs * rsp)
-+{
-+	return (rsp                                                           &&
-+		(rsp->session.payloadtype == IPMI_PAYLOAD_TYPE_SOL));
-+}
-+
-+
-+
-+/*
-+ * sol_response_acks_packet
-+ */
-+static int
-+sol_response_acks_packet(struct ipmi_rs         * rsp,
-+			 struct ipmi_v2_payload * payload)
-+{
-+	return (is_sol_packet(rsp)                                            &&
-+		payload                                                       &&
-+		(payload->payload_type    == IPMI_PAYLOAD_TYPE_SOL)           && 
-+		(rsp->payload.sol_packet.acked_packet_number ==
-+		 payload->payload.sol_packet.packet_sequence_number));
-+}
-+
-+/*
-+ * ipmi_lan_send_sol_payload
-+ *
-+ */
-+static struct ipmi_rs *
-+ipmi_lan_send_sol_payload(struct ipmi_intf * intf,
-+			  struct ipmi_v2_payload * payload)
-+{
-+	struct ipmi_rs      * rsp = NULL;
-+	uint8_t             * msg;
-+	int                   len;
-+	int                   try = 0;
-+
-+	if (intf->opened == 0 && intf->open != NULL) {
-+		if (intf->open(intf) < 0)
-+			return NULL;
-+	}
-+
-+	msg = ipmi_lan_build_sol_msg(intf, payload, &len);
-+	if (len <= 0 || msg == NULL) {
-+		lprintf(LOG_ERR, "Invalid SOL payload packet");
-+		if (msg != NULL)
-+			free(msg);
-+		return NULL;
-+	}
-+
-+	lprintf(LOG_DEBUG, ">> SENDING A SOL MESSAGE\n");
-+
-+	for (;;) {
-+		if (ipmi_lan_send_packet(intf, msg, len) < 0) {
-+			try++;
-+			usleep(5000);
-+			continue;
-+		}
-+
-+		/* if we are set to noanswer we do not expect response */
-+		if (intf->noanswer)
-+			break;
-+		
-+		if (payload->payload.sol_packet.packet_sequence_number == 0) {
-+			/* We're just sending an ACK.  No need to retry. */
-+			break;
-+		}
-+
-+		usleep(100);
-+		
-+		rsp = ipmi_lan_recv_sol(intf); /* Grab the next packet */
-+
-+		if (sol_response_acks_packet(rsp, payload))
-+			break;
-+
-+		else if (is_sol_packet(rsp) && rsp->data_len)
-+		{
-+			/*
-+			 * We're still waiting for our ACK, but we more data from
-+			 * the BMC
-+			 */
-+			intf->session->sol_data.sol_input_handler(rsp);
-+		}
-+
-+		usleep(5000);
-+		if (++try >= intf->session->retry) {
-+			lprintf(LOG_DEBUG, "  No response from remote controller");
-+			break;
-+		}
-+	}
-+
-+	return rsp;
-+}
-+
-+/*
-+ * is_sol_partial_ack
-+ *
-+ * Determine if the response is a partial ACK/NACK that indicates
-+ * we need to resend part of our packet.
-+ *
-+ * returns the number of characters we need to resend, or
-+ *         0 if this isn't an ACK or we don't need to resend anything
-+ */
-+static int is_sol_partial_ack(struct ipmi_v2_payload * v2_payload,
-+			      struct ipmi_rs         * rsp)
-+{
-+	int chars_to_resend = 0;
-+
-+	if (v2_payload                                &&
-+	    rsp                                       &&
-+	    is_sol_packet(rsp)                        &&
-+	    sol_response_acks_packet(rsp, v2_payload) &&
-+	    (rsp->payload.sol_packet.accepted_character_count <
-+	     v2_payload->payload.sol_packet.character_count))
-+	{
-+		if (rsp->payload.sol_packet.accepted_character_count == 0) {
-+			/* We should not resend data */
-+			chars_to_resend = 0;
-+		}
-+		else
-+		{
-+			chars_to_resend =
-+				v2_payload->payload.sol_packet.character_count -
-+				rsp->payload.sol_packet.accepted_character_count;
-+		}
-+	}
-+
-+	return chars_to_resend;
-+}
-+
-+/*
-+ * set_sol_packet_sequence_number
-+ */
-+static void set_sol_packet_sequence_number(struct ipmi_intf * intf,
-+					   struct ipmi_v2_payload * v2_payload)
-+{
-+	/* Keep our sequence number sane */
-+	if (intf->session->sol_data.sequence_number > 0x0F)
-+		intf->session->sol_data.sequence_number = 1;
-+
-+	v2_payload->payload.sol_packet.packet_sequence_number =
-+		intf->session->sol_data.sequence_number++;
-+}
-+
-+/*
-+ * ipmi_lan_send_sol
-+ *
-+ * Sends a SOL packet..  We handle partial ACK/NACKs from the BMC here.
-+ *
-+ * Returns a pointer to the SOL ACK we received, or
-+ *         0 on failure
-+ * 
-+ */
-+struct ipmi_rs *
-+ipmi_lan_send_sol(struct ipmi_intf * intf,
-+		  struct ipmi_v2_payload * v2_payload)
-+{
-+	struct ipmi_rs * rsp;
-+	int chars_to_resend = 0;
-+
-+	v2_payload->payload_type   = IPMI_PAYLOAD_TYPE_SOL;
-+
-+	/*
-+	 * Payload length is just the length of the character
-+	 * data here.
-+	 */
-+	v2_payload->payload.sol_packet.acked_packet_number = 0; /* NA */
-+
-+	set_sol_packet_sequence_number(intf, v2_payload);
-+	
-+	v2_payload->payload.sol_packet.accepted_character_count = 0; /* NA */
-+
-+	rsp = ipmi_lan_send_sol_payload(intf, v2_payload);
-+
-+	/* Determine if we need to resend some of our data */
-+	chars_to_resend = is_sol_partial_ack(v2_payload, rsp);
-+
-+	while (chars_to_resend)
-+	{
-+		/*
-+		 * We first need to handle any new data we might have
-+		 * received in our NACK
-+		 */
-+		if (rsp->data_len)
-+			intf->session->sol_data.sol_input_handler(rsp);
-+
-+		set_sol_packet_sequence_number(intf, v2_payload);
-+		
-+		/* Just send the required data */
-+		memmove(v2_payload->payload.sol_packet.data,
-+			v2_payload->payload.sol_packet.data +
-+			rsp->payload.sol_packet.accepted_character_count,
-+			chars_to_resend);
-+
-+		v2_payload->payload.sol_packet.character_count = chars_to_resend;
-+
-+		rsp = ipmi_lan_send_sol_payload(intf, v2_payload);
-+
-+		chars_to_resend = is_sol_partial_ack(v2_payload, rsp);
-+	}
-+
-+	return rsp;
-+}
-+
-+/*
-+ * check_sol_packet_for_new_data
-+ *
-+ * Determine whether the SOL packet has already been seen
-+ * and whether the packet has new data for us.
-+ *
-+ * This function has the side effect of removing an previously
-+ * seen data, and moving new data to the front.
-+ *
-+ * It also "Remembers" the data so we don't get repeats.
-+ *
-+ */
-+static int
-+check_sol_packet_for_new_data(struct ipmi_intf * intf,
-+			      struct ipmi_rs *rsp)
-+{
-+	static uint8_t last_received_sequence_number = 0;
-+	static uint8_t last_received_byte_count      = 0;
-+	int new_data_size                            = 0;
-+
-+	if (rsp &&
-+	    (rsp->session.payloadtype == IPMI_PAYLOAD_TYPE_SOL))
-+	    
-+	{
-+		uint8_t unaltered_data_len = rsp->data_len;
-+		if (rsp->payload.sol_packet.packet_sequence_number ==
-+		    last_received_sequence_number)
-+		{
-+			/*
-+			 * This is the same as the last packet, but may include
-+			 * extra data
-+			 */
-+			new_data_size = rsp->data_len - last_received_byte_count;
-+			
-+			if (new_data_size > 0)
-+			{
-+				/* We have more data to process */
-+				memmove(rsp->data,
-+					rsp->data +
-+					rsp->data_len - new_data_size,
-+					new_data_size);
-+			}
-+			
-+			rsp->data_len = new_data_size;
-+		}
-+	
-+		/*
-+		 *Rember the data for next round
-+		 */
-+		if (rsp && rsp->payload.sol_packet.packet_sequence_number)
-+		{
-+			last_received_sequence_number =
-+				rsp->payload.sol_packet.packet_sequence_number;
-+			last_received_byte_count = unaltered_data_len;
-+		}
-+	}
-+
-+	return new_data_size;
-+}
-+
-+/*
-+ * ack_sol_packet
-+ *
-+ * Provided the specified packet looks reasonable, ACK it.
-+ */
-+static void
-+ack_sol_packet(struct ipmi_intf * intf,
-+	       struct ipmi_rs * rsp)
-+{
-+	if (rsp &&
-+	    (rsp->session.payloadtype == IPMI_PAYLOAD_TYPE_SOL) &&
-+	    (rsp->payload.sol_packet.packet_sequence_number))
-+	{
-+		struct ipmi_v2_payload ack;
-+
-+		memset(&ack, 0, sizeof(struct ipmi_v2_payload));
-+
-+		ack.payload_type = IPMI_PAYLOAD_TYPE_SOL;
-+
-+		/*
-+		 * Payload length is just the length of the character
-+		 * data here.
-+		 */
-+		ack.payload_length = 0;
-+
-+		/* ACK packets have sequence numbers of 0 */
-+		ack.payload.sol_packet.packet_sequence_number = 0;
-+
-+		ack.payload.sol_packet.acked_packet_number =
-+			rsp->payload.sol_packet.packet_sequence_number;
-+
-+		ack.payload.sol_packet.accepted_character_count = rsp->data_len;
-+		
-+		ipmi_lan_send_sol_payload(intf, &ack);
-+	}
-+}
-+
-+/*
-+ * ipmi_recv_sol
-+ *
-+ * Receive a SOL packet and send an ACK in response.
-+ *
-+ */
-+struct ipmi_rs *
-+ipmi_lan_recv_sol(struct ipmi_intf * intf)
-+{
-+	struct ipmi_rs * rsp = ipmi_lan_poll_recv(intf);
-+
-+	ack_sol_packet(intf, rsp);              
-+
-+	/*
-+	 * Remembers the data sent, and alters the data to just
-+	 * include the new stuff.
-+	 */
-+	check_sol_packet_for_new_data(intf, rsp);
-+
-+	return rsp;
-+}
-+
- /* send a get device id command to keep session active */
- static int
- ipmi_lan_keepalive(struct ipmi_intf * intf)
-@@ -1411,6 +1905,8 @@
- 
- 	intf->abort = 1;
- 
-+	intf->session->sol_data.sequence_number = 1;
-+	
- 	/* open port to BMC */
- 	memset(&s->addr, 0, sizeof(struct sockaddr_in));
- 	s->addr.sin_family = AF_INET;