New upstream version 1.8.19upstream/1.8.19upstream

1 files changed, 0 insertions, 404 deletions

diff --git a/ipmitool.spec b/ipmitool.spec
deleted file mode 100644
index bbc7c49..0000000
--- a/ipmitool.spec
+++ /dev/null
@@ -1,404 +0,0 @@
-Name:         ipmitool
-Summary:      ipmitool - Utility for IPMI control
-Version:      1.8.18
-Release:      1%{?_distro:.%{_distro}}
-License:      BSD
-Group:        Utilities
-Packager:     Jim Mankovich <jmank@hp.com>
-Source:       %{name}-%{version}.tar.gz
-Buildroot:    /var/tmp/ipmitool-root
-
-%description
-This package contains a utility for interfacing with devices that support
-the Intelligent Platform Management Interface specification.  IPMI is
-an open standard for machine health, inventory, and remote power control.
-
-This utility can communicate with IPMI-enabled devices through either a
-kernel driver such as OpenIPMI or over the RMCP LAN protocol defined in
-the IPMI specification.  IPMIv2 adds support for encrypted LAN
-communications and remote Serial-over-LAN functionality.
-
-It provides commands for reading the Sensor Data Repository (SDR) and
-displaying sensor values, displaying the contents of the System Event
-Log (SEL), printing Field Replaceable Unit (FRU) information, reading and
-setting LAN configuration, and chassis power control.
-
-%prep
-if [ "$RPM_BUILD_ROOT" ] && [ "$RPM_BUILD_ROOT" != "/" ]; then
-    rm -rf $RPM_BUILD_ROOT
-fi
-
-%setup
-
-%build
-./configure --with-kerneldir \
-	--with-rpm-distro= \
-	--prefix=%{_prefix} \
-	--bindir=%{_bindir} \
-	--sbindir=%{_sbindir} \
-	--datadir=%{_datadir} \
-	--includedir=%{_includedir} \
-	--libdir=%{_libdir} \
-	--mandir=%{_mandir} \
-	--sysconfdir=%{_sysconfdir}
-make
-
-%install
-make DESTDIR=$RPM_BUILD_ROOT install-strip
-
-%clean
-if [ "$RPM_BUILD_ROOT" ] && [ "$RPM_BUILD_ROOT" != "/" ]; then
-    rm -rf $RPM_BUILD_ROOT
-fi
-
-%files
-%defattr(755,root,root)
-%attr(755,root,root) %{_bindir}/*
-%attr(755,root,root) %{_sbindir}/*
-%{_datadir}/ipmitool/*
-%{_mandir}/man*/*
-%doc %{_datadir}/doc/ipmitool
-
-
-%changelog
-* Wed Feb 25 2009 <pere@hungry.com>  1.8.11-1
-- Fix new GCC compilation issues in regards to Packing
-- Fix Tracker bug #1642710 - ipmi_kcs_drv being loaded/unloaded
-  for 2.4 kernel instead of ipmi_si_drv driver module
-- New -y option added to allow specification of kg keys with
-  non-printable characters
-- New -K option added to allow kgkey settings via environmental
-  variable IPMI_KGKEY
-- Generic device support added for EEPROM with SDR Type 10h (gendev)
-- Fix to lan-bridging for a double-bridging crash and to fix
-  an issue with bridging multiple concurrent requests and
-  erroneous handling of raw Send Message
-- Lanplus fix for commands like 'sensor list' without the -t option
-  causing wrong double bridged requests of a sensor is located
-  on another satellite controller
-- Fix lan and lanplus request list entry removal bugs
-- Fix non-working issue when trying to send a bridge message with
-  Cipher 3
-- Change bridge message handling to reuse command ipmi_lan_poll_recv
-- Added PICMG 2.0 and 2.3 support
-- Fix PICMG (ATCA) extension verification and reversal of BCD encoded
-  values for "major" and "minor" fields
-- Add IANA support for Pigeon Point
-- Add OEM SW/FW Record identification
-- Fix to include I2C and LUN addresses so sensors are correctly managed
-- Patch ID 1990560 to get readings from non-linear analog sensors
-- Add support for SOL payload status command
-- SOL set parameter range checking added
-- Fixed SOL activate options usage 
-- Fixed crashes when parsing 'sol payload' and 'tsol' cmds (#216967)
-- Added retries to SOL keepalive
-- Fixed wrong mask values for Front Panel disable/enable status
-- Add support to access fru internal use area
-- Add support for new PICMG 3.0 R3.0 (March 24, 2008) to allow
-  blocks of data within the FRU storage area to be write protected.
-- Fix node reporting in GUID; Tracker bug #2339675
-- Fix watchdog use/action print strings
-- Fix endian bug in SDR add from file; Tracker bug #2075258
-- Fix crash when dumping SDRs in a file and there's an error
-  getting an SDR; improve algorithm for optimal packet size
-- Fix occasional SDR dump segfault; #1793076
-- Allow ipmitool sel delete to accept hex list entry numbers
-- Fix SEL total space reporting.
-- Fix for garbage sensor threshold values reported when none 
-  returned.  Tracker Bug #863748
-- ipmievd change to Monitor %used in SEL buffer and log warnings when
-  the buffer is 80% and 100% full
-
-* Fri Aug 08 2008 <pere@hungry.com>  1.8.10-1
- - Added support for BULL IANA number.
- - Fixed contrib build so the oem_ibm_sel_map file gets included in rpm 
-   builds again.
- - Added support for Debian packages to be built from CVS
- - Fix for sdr and sel timestamp reporting issues
- - Fix for discrete sensor state print routines to address state bits 8-14
- - Change ipmi_chassis_status() to non-static so it can be used externally
- - Added retries to SOL keepalive
- - Fix to stop sensor list command from reporting a failure due to missing 
-   sensor
- - Fix bug in sdr free space reporting
- - Add support for IANA number to vendor name conversion for many vendors
- - Fix segfault bug in lan set command
- - Fix bug in population of raw i2c wdata buffer
- - Fix bug in ipmb sensor reading
- - Fix misspellings, typos, incorrect strncmp lengths, white space
- - Update/fix printed help and usages for many commands
- - Add and update support for all commands in ipmitool man page
- - Fix for lanplus session re-open when the target becomes unavailable following
-   a fw upgrade activation
- - Add support for watchdog timer shutoff, reset, and get info
- - Add support for more ibm systems in oem_ibm_sel_map
- - Add more JEDEC support info for DIMMs; decrease request size for DIMM FRU
-   info to 16 bytes at a time to allow more DIMM FRUs to respond.
- - Fix to change hpmfwupg to version 1.02; fix to reduce hpmfwupg buffer 
-   length more aggressively when no response from iol
- - Fix HPM firmware activation via IOL; fake a timeout after IOL session 
-   re-open to force get upgrade status retry; Added retries on 0xD3 
-   completion code
- - Add support for freeipmi 0.6.0; adjust autoconf for changes
- - Fix for oemval2str size
- - Add support for product name resolution in mc info
- - Fix FRU display format
- - Added PICMG ekeying analyzer module support (ekanalyzer); display point
-   to point physical connectivity and power supply information between 
-   carriers and AMC modules; display matched results of ekeying match 
-   between an on-carrier device and AMC module or between 2 AMC modules
- - Fix AMC GUID display support
- - Improved amcportstate operations
- - Added resolution for new sensor types
- - Fix segfault in SOL
- - Fix bug that caused infinite loop on BMCs with empty SDRs
- - Fix to move out Kontron OEM sensor resolution for other OEMs which could 
-   lead to bad event descriptions
- - Add new FRU edit mode thereby allowing serial numbers, etc. to be changed;
-    improvements to OEM edit mode
- - Added SPD support for parms: channel number, max read size
- - Add SDR support for adding SDR records from a dumped file, clearing SDR, 
-   adding partial SDR records
- - Add updates and fixes to hpmfwupg: upload block size to 32 bytes for KCS,
-   handle long response option, implement rollback override, garbage output fix
- - Add double bridge lan support , fix bridging issue
- - Add HPM support to pre-check which components need to be skipped
- - Fix autodetection of maximum packet size when using IPMB
- - Add new Kontron OEM command to set the BIOS boot option sequence
- - Add support for dual-bridge/ dual send message
- - Add auto-detect for local IPMB address using PICMG 2.X extension
- - Add support for HPM.1 1.0 specification compliance
- - Fix for improper lan/lanplus addressing
- - Added transit_channel and transit_addr to ipmi_intf struct
- - Fix bad password assertion bug due to rakp2 HMAC not being checked properly
- - Added ability to interpret PPS shelf manager clia sel dump
- - Corrected PICMG M7 state event definition macros
- - Added FRU parsing enhancements
- - Added "isol info", "isol set" and "isol activate" commands to support 
-   Intel IPMI v1.5 SOL functionality. Removed "isol setup" command.
- - Fix bug in ipmi_lan_recv_packet() in lan and lanplus interfaces.
- - Fix bug in "chassis poh" command.
- - Fix HPM.1 upgrade to apply to only given component when instructed to do so
- - Added configure auto-detection if dual bridge extension is supported 
-   by OpenIPMI
-
-* Tue Mar  6 2007 <pere@hungry.com>  1.8.9-1
- - Added initial AMC ekey query operation support
- - Improvements to ekeying support (PICMG 3.x only)
- - Added initial interactive edition support for multirec; added IANA
-   verification before interpreting PICMG records.
- - Added edit support for AMC activation "Maximum Internal Current"
- - Fix bug generating garbage on the screen when handling GetDeviceId
-   and sol traffic occurs
- - Added ability to map OEM sensor types to OEM description string using 
-   IANA number; moved IANA number table
- - Fix lan set access command to use value already saved within parameters 
-   for PEF and authentication
- - Fix bug in cmd ipmitool lan stats get 1
- - Add support to allow ipmitool/ipmievd to target specific device nodes 
-   on multi-BMC systems
- - Add support for name+privilege lookup for lanplus sessions
- - Fix time_t conversion bug for 64-bit OS
- - Added prefix of hostname on sel ipmievd sessions
- - Fixed FWUM Get Info
- - Fix ipmievd fd closing bug
- - Add set-in-progress flag support to chassis bootdev
- - Added new chassis bootdev options
- - Add sol payload enable/disable comman
- - Fix SOL set errors when commit-write not supported
- - Fix reset of session timeout for lanplus interface
- - Fixed lan interface accessibility timeout handling
- - Fix bug with Function Get Channel Cipher Suites command when more 
-   than 1 page used.
- - Fix missing firmware firewall top-level command
- - Fix bug in SOL keepalive functionality
- - Fix SOLv2 NACK and retry handling for Intel ESB2 BMC
- - Added ipmi_sel_get_oem_sensor* APIs
- - Added HPM.1 support 
- - Fix segfault when incorrect oem option supplied
- - Fix bus problem with spd command
- - Fix segfault in SOL when remote BMC does not return packet
- - Adjust packet length for AMC.0 retricting IPMB packets to 32 bytes
- - Added lan packet size reduction mechanism
- - Fix bug with sendMessage of bad length with different target
- - Fix for big endian (PPC) architecture
- - NetBSD fixes
- - Fix segfault and channel problem with user priv command
- - Add support for bus/chan on i2c raw command
- - Add freeipmi interface support
- - Add remote spd printing
- - Add better detection of linux/compiler.h to config
- - Makefile changes to fix makedistcheck, etc. 
-
-* Tue May 02 2006 <duncan@iceblink.org>  1.8.8-1
- - Fix segfaults in sensor data repository list
- - Fix ipmievd to open interface before daemonizing
- - Fix IPMIv1.5 authtype NONE to ignore supplied password
- - Fix cipher suite display bug in lan print
- - Fix typo in IPMIv2 SOL output when sending break
- - Fix improper LUN handling with Tyan SOL
- - Add LUN support to OpenIPMI interface
- - Add support for Kontron OEM commands
- - Update to Kontron Firmware Update command
-
-* Sun Mar 19 2006 <duncan@iceblink.org>  1.8.7-1
- - Add Sun OEM command for blades
- - Increase argument size for raw commands in shell/exec
- - Fix handling of LUNs for LAN interfaces
- - Add IPMIv2 SOL loopback test
- - Add support for IBM OEM SEL messages
- - Disable file paranoia checks on read files by default
- - Support IPMIv2 SOL on older Intel boxes
- - Display message and exit if keepalive fails during SOL
- - Add support for setting VLAN id and priority
- - Add support for FreeBSD OpenIPMI-compatible driver
- - Add support for IPMIv2 Firmware Firewall
- - Fix gcc4 compile warnings
- - Make ipmievd generate pidfile
- - Add initscripts for ipmievd
-
-* Mon Jan 17 2006 <duncan@iceblink.org>  1.8.6-1
- - Fix memory corruption when sending encrypted SOL traffic
- - Add keepalive timer to IPMIv2 SOL sessions
-
-* Sat Jan 14 2006 <duncan@iceblink.org>  1.8.5-1
- - Raise privilege level after creating IPMIv2 session
- - Add support for settable SOL escape character with -e option
- - Add support for Kg BMC key for IPMIv2 authentication with -k option
- - Add support for Tyan IPMIv1.5 SOL with tsol command
- - Add support for PICMG devices
- - Add support for OEM SEL event parsing
- - Add support for command bridging over lan and lanplus interfaces
- - New 'chassis selftest' command
- - Many bufxies and patches from contributors
-
-* Wed May 18 2005 <duncan@iceblink.org>  1.8.2-1
- - Fix FRU reading for large (>255 bytes) areas.
- - Overhaul to ipmievd to support SEL polling in addition to OpenIPMI.
- - Fix LAN parameter segfault when no Ciphers supported by BMC.
- - Fix IPMIv2 support on Intel v2 BMCs (use -o intelplus).
- - Separate option parsing code from main ipmitool source file.
- - Add raw I2C support with IPMI Master Read-Write command.
- - Add support for new 'sdr elist' extended output format.
- - Add support for listing sensors by type with 'sdr type' command.
- - Add support for new 'sel elist' extended output format that
-   cross-references events with sensors.
- - Add support for sending dynamically generated platform events
-   based on existing sensor information.
- - New '-S' argument to read local SDR cache created with 'sdr dump'.
- - Updated manpage for ipmitool and ipmievd.
-
-* Wed Apr 06 2005 <duncan@iceblink.org>  1.8.1-1
- - Install ipmievd into /usr/sbin
-
-* Wed Mar 16 2005 <duncan@iceblink.org>  1.8.0-1
- - Fix IPMIv2.0 issues
- - Fix chassis boot parameter support
- - Add support for linear sensors
- - Update bmc plugin to work with new Solaris bmc driver (new ioctl
-   for interface detection and new STREAMS message-based interface)
-
-* Tue Jan 18 2005 <duncan@iceblink.org>  1.7.0-1
- - Propogate errors correctly so exit status will be useful
- - More consistent display of errors including completion code text
- - Errors and debug is send to stderr now
- - New "sel get" command that will print details about SEL entry
-   and corresponding SDR records as well as FRUs via entity association
- - Improved event generator, now supports reading events from text file
- - New "-o oemtype" option for specifying OEM boards
-   exsting types are "supermicro" and "intelwv2"
- - New PEF subsystem from Tim Murphy at Dell
- - New "bmc" plugin for Solaris 10 x86
- - Many bugfixes and contributed patches
- - Support for Supermicro BMC OEM authentication method
- - Fix minor problem with LAN parameter setting
-
-* Wed Aug 18 2004 <duncan@iceblink.org>  1.6.0-1
- - Add a README
- - Add support for IPMIv2 and Serial-over-LAN from Newisys
- - Add Solaris x86 lipmi interface
- - Add support for building Solaris packages
- - Add support for building RPMs as non-root user
- - Fix segfault when doing "sel list" (from Matthew Braithwaite)
- - Fix "chassis identify" on some BMCs (from ebrower@sourceforge)
- - Add "bmc info" and related output (from ebrower@sourceforge)
- - new "shell" and "exec" commands
- - lots of other contributed patches
-
-* Sat May 27 2004 <duncan@iceblink.org>  1.5.9-1
- - Add ability to get a particular sensor by name
- - Add ability to set a particular sensor threshold
- - Add support for displaying V2 channel authentication levels
- - Add README for rrdtool scripts in contrib directory
- - Improve lan interface retry handling
- - Support prompting for password or reading from environment
- - Move chaninfo command into channel subcommand
- - Fix reservation ID handling when two sessions open to BMC
- - Fix reading of large FRU data
- - Add configure option for changing binary to ipmiadm for Solaris
- - Fix compile problem on Solaris 8
-
-* Tue Jan 27 2004 <duncan@iceblink.org>  1.5.8-1
- - Enable static compilation of interfaces
- - Fix types to be 64-bit safe
- - Fix compilation problems on Solaris
- - Fix multiple big-endian problems for Solaris/SPARC
- - Fix channel access to save settings to NVRAM
- - Set channel privilege limit to ADMIN during "access on"
- - Enable gratuitous ARP in bmcautoconf.sh
- - Add support for Linux kernel panic messages in SEL output
- - Add support for type 3 SDR records
-
-* Mon Jan  5 2004 <duncan@iceblink.org>  1.5.7-1
- - add IPMIv1.5 eratta fixes
- - additions to FRU printing and FRU multirecords
- - better handling of SDR printing
- - contrib scripts for creating rrdtool graphs
-
-* Thu Dec  4 2003 <duncan@iceblink.org>  1.5.6-1
- - Fix SEL event decoding for generic events
- - Handle empty SEL gracefully when doing "sel list"
- - Fix sdr handling of sensors that do not return a reading
- - Fix for CSV display of sensor readings/units from Fredrik Öhrn
-
-* Tue Nov 25 2003 <duncan@iceblink.org>  1.5.5-1
- - Add -U option for setting LAN username
- - Fix -v usage for plugin interfaces
-
-* Fri Nov 14 2003 <duncan@iceblink.org>  1.5.4-1
- - pull interface plugin api into library
- - fix ipmievd
-
-* Fri Oct 31 2003 <duncan@iceblink.org>  1.5.3-1
- - add -g optin for pedantic ipmi-over-lan communication
-
-* Fri Oct 24 2003 <duncan@iceblink.org>  1.5.2-1
- - add gratuitous arp interval setting
-
-* Wed Oct  8 2003 <duncan@iceblink.org>  1.5.1-1
- - better SEL support
- - fix display bug in SDR list
-
-* Fri Sep  5 2003 <duncan@iceblink.org>  1.5.0-1
- - use automake/autoconf/libtool
- - dynamic loading interface plugins
-
-* Wed May 28 2003 <duncan@iceblink.org>  1.4.0-1
- - make UDP packet handling more robust
- - fix imb driver support
-
-* Thu May 22 2003 <duncan@iceblink.org>  1.3-1
- - update manpage
- - rework of low-level network handling
- - add basic imb driver support
-
-* Wed Apr  2 2003 <duncan@iceblink.org>  1.2-1
- - change command line option parsing
- - support for more chassis commands
-
-* Tue Apr  1 2003 <duncan@iceblink.org>  1.1-1
- - minor fixes.
-
-* Sun Mar 30 2003 <duncan@iceblink.org>  1.0-1
- - Initial release.
-