summaryrefslogtreecommitdiff
path: root/debian/patches/0605-manpage_typo.patch
diff options
context:
space:
mode:
Diffstat (limited to 'debian/patches/0605-manpage_typo.patch')
-rw-r--r--debian/patches/0605-manpage_typo.patch272
1 files changed, 0 insertions, 272 deletions
diff --git a/debian/patches/0605-manpage_typo.patch b/debian/patches/0605-manpage_typo.patch
deleted file mode 100644
index c1adfdb..0000000
--- a/debian/patches/0605-manpage_typo.patch
+++ /dev/null
@@ -1,272 +0,0 @@
-Description: typo in man-page
-Author: Jörg Frings-Fürst <debian@jff-webhosting.net>
-Last-Update: 2014-05-19
----
-This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
-Index: trunk/doc/ipmitool.1
-===================================================================
---- trunk.orig/doc/ipmitool.1
-+++ trunk/doc/ipmitool.1
-@@ -10,47 +10,47 @@ ipmitool [ <options> ] <command> [ <sub-
- Any recognized option is accepted. Conditional options may be ignored or it's usage postponed until shell or exec processes relevant command.
- .br
-
--<general-options> := [ -h | -V | -v | -I <interface> | -H <address> |
-- -d <N> | -p <port> | -c | -U <username> |
-- -L <privlvl> | -l <lun> | -m <local_address> |
-- -N <sec> | -R <count> | <password-option> |
-+<general\-options> := [ \-h | \-V | \-v | \-I <interface> | \-H <address> |
-+ \-d <N> | \-p <port> | \-c | \-U <username> |
-+ \-L <privlvl> | \-l <lun> | \-m <local_address> |
-+ \-N <sec> | \-R <count> | <password\-option> |
- <oem-option> | <bridge-options> ]
-
--<conditional-opts> := [ <lan-options> | <lanplus-options> |
-- <command-options> ]
-+<conditional\-opts> := [ <lan\-options> | <lanplus\-options> |
-+ <command\-options> ]
- .br
- Bridging:
- .br
--<bridge-options> := -t <target_address> [ -b <channel> |
-- [ -T <address> | -B <channel> ] ]
-+<bridge\-options> := \-t <target_address> [ \-b <channel> |
-+ [ \-T <address> | \-B <channel> ] ]
- .br
-
--Options used with -I lan:
-+Options used with \-I lan:
- .br
--<lan-options> := [ -A <authtype> ]
-+<lan\-options> := [ \-A <authtype> ]
- .br
-
--Options used with -I lanplus:
-+Options used with \-I lanplus:
- .br
--<lanplus-options> := [ -C <ciphersuite> | <key-option> ]
-+<lanplus\-options> := [ \-C <ciphersuite> | <key\-option> ]
- .br
-
- Option groups setting same value:
- .br
--<key-option> := [ -k <key> | -K | -y <hex_key> | -Y ]
-+<key\-option> := [ \-k <key> | \-K | \-y <hex_key> | \-Y ]
- .br
--<password-option> := [ -f <password_file> | -a | -P <password> | -E ]
-+<password\-option> := [ \-f <password_file> | \-a | \-P <password> | \-E ]
- .br
--<oem-option> := [ -o <oemtype> | -g | -s ]
-+<oem\-option> := [ \-o <oemtype> | \-g | \-s ]
- .br
-
- Options used with specific command <command-options>:
- .br
--<options-sdr> := [ -S <sdr_cache_file> ]
-+<options\-sdr> := [ \-S <sdr_cache_file> ]
- .br
--<options-sel> := [ -O <sel_oem> ]
-+<options\-sel> := [ \-O <sel_oem> ]
- .br
--<options-sol> := [ -e <sol_escape_char> ]
-+<options\-sol> := [ \-e <sol_escape_char> ]
-
-
- .SH "DESCRIPTION"
-@@ -120,7 +120,7 @@ option is absent, or if password_file is
- will default to NULL.
- .TP
- \fB\-g\fR
--Deprecated. Use: -o intelplus
-+Deprecated. Use: \-o intelplus
- .TP
- \fB\-h\fR
- Get basic usage help from the command line.
-@@ -151,7 +151,7 @@ combined with \fI-t target address\fP.
- .TP
- \fB\-m\fR <\fIlocal_address\fP>
- Set the local IPMB address. The local address defaults to 0x20
--or is auto discovered on PICMG platforms when -m is not specified.
-+or is auto discovered on PICMG platforms when \-m is not specified.
- There should be no need to change the local address for normal operation.
- .TP
- \fB\-N\fR <\fIsec\fP>
-@@ -185,7 +185,7 @@ Command \fIraw\fP uses fixed value of on
- Command \fIhpm\fP uses fixed value of 10 retries.
- .TP
- \fB\-s\fR
--Deprecated. Use: -o supermicro
-+Deprecated. Use: \-o supermicro
- .TP
- \fB\-S\fR <\fIsdr_cache_file\fP>
- Use local file for remote SDR cache. Using a local SDR cache
-@@ -223,7 +223,7 @@ Display version information.
- \fB\-y\fR <\fIhex key\fP>
- Use supplied Kg key for IPMIv2.0 authentication. The key is expected in
- hexadecimal format and can be used to specify keys with non-printable
--characters. E.g. '-k PASSWORD' and '-y 50415353574F5244' are
-+characters. E.g. '\-k PASSWORD' and '\-y 50415353574F5244' are
- equivalent.
- The default is not to use any Kg key.
- .TP
-@@ -1052,7 +1052,7 @@ Display point to point physical connecti
- \fIpower\fP <\fBxx=filename1\fR> <\fBxx=filename2\fR> \fB...\fr
- .br
-
--Display power supply informations between carrier and AMC modules.
-+Display power supply information between carrier and AMC modules.
- .TP
- \fIall\fP <\fBxx=filename\fR> <\fBxx=filename\fR> \fB...\fr
- .br
-@@ -1064,7 +1064,7 @@ modules.
- .TP
- \fIfrushow\fP <\fBxx=filename\fR>
- .br
--Convert a binary FRU file into human readable text format. Use -v option to get
-+Convert a binary FRU file into human readable text format. Use \-v option to get
- more display information.
-
- .RE
-@@ -1082,56 +1082,56 @@ and an AMC module or between 2 AMC modul
- AMC slot B1 port 0 ==> On-Carrier Device 0 port 16
- Matching Result
- - From On-Carrier Device ID 0
-- -Channel ID 11 || Lane 0: enable
-- -Link Type: AMC.2 Ethernet
-- -Link Type extension: 1000BASE-BX (SerDES Gigabit) Ethernet link
-- -Link Group ID: 0 || Link Asym. Match: exact match
-+ \-Channel ID 11 || Lane 0: enable
-+ \-Link Type: AMC.2 Ethernet
-+ \-Link Type extension: 1000BASE-BX (SerDES Gigabit) Ethernet link
-+ \-Link Group ID: 0 || Link Asym. Match: exact match
- - To AMC slot B1
-- -Channel ID 0 || Lane 0: enable
-- -Link Type: AMC.2 Ethernet
-- -Link Type extension: 1000BASE-BX (SerDES Gigabit) Ethernet link
-- -Link Group ID: 0 || Link Asym. Match: exact match
-+ \-Channel ID 0 || Lane 0: enable
-+ \-Link Type: AMC.2 Ethernet
-+ \-Link Type extension: 1000BASE-BX (SerDES Gigabit) Ethernet link
-+ \-Link Group ID: 0 || Link Asym. Match: exact match
- *-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
- AMC slot B1 port 1 ==> On-Carrier Device 0 port 12
- Matching Result
- - From On-Carrier Device ID 0
-- -Channel ID 6 || Lane 0: enable
-- -Link Type: AMC.2 Ethernet
-- -Link Type extension: 1000BASE-BX (SerDES Gigabit) Ethernet link
-- -Link Group ID: 0 || Link Asym. Match: exact match
-+ \-Channel ID 6 || Lane 0: enable
-+ \-Link Type: AMC.2 Ethernet
-+ \-Link Type extension: 1000BASE-BX (SerDES Gigabit) Ethernet link
-+ \-Link Group ID: 0 || Link Asym. Match: exact match
- - To AMC slot B1
-- -Channel ID 1 || Lane 0: enable
-- -Link Type: AMC.2 Ethernet
-- -Link Type extension: 1000BASE-BX (SerDES Gigabit) Ethernet link
-- -Link Group ID: 0 || Link Asym. Match: exact match
-+ \-Channel ID 1 || Lane 0: enable
-+ \-Link Type: AMC.2 Ethernet
-+ \-Link Type extension: 1000BASE-BX (SerDES Gigabit) Ethernet link
-+ \-Link Group ID: 0 || Link Asym. Match: exact match
- *-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
- On-Carrier Device vs AMC slot A2
- AMC slot A2 port 0 ==> On-Carrier Device 0 port 3
- Matching Result
- - From On-Carrier Device ID 0
-- -Channel ID 9 || Lane 0: enable
-- -Link Type: AMC.2 Ethernet
-- -Link Type extension: 1000BASE-BX (SerDES Gigabit) Ethernet link
-- -Link Group ID: 0 || Link Asym. Match: exact match
-+ \-Channel ID 9 || Lane 0: enable
-+ \-Link Type: AMC.2 Ethernet
-+ \-Link Type extension: 1000BASE-BX (SerDES Gigabit) Ethernet link
-+ \-Link Group ID: 0 || Link Asym. Match: exact match
- - To AMC slot A2
-- -Channel ID 0 || Lane 0: enable
-- -Link Type: AMC.2 Ethernet
-- -Link Type extension: 1000BASE-BX (SerDES Gigabit) Ethernet link
-- -Link Group ID: 0 || Link Asym. Match: exact match
-+ \-Channel ID 0 || Lane 0: enable
-+ \-Link Type: AMC.2 Ethernet
-+ \-Link Type extension: 1000BASE-BX (SerDES Gigabit) Ethernet link
-+ \-Link Group ID: 0 || Link Asym. Match: exact match
- *-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
- AMC slot B1 vs AMC slot A2
- AMC slot A2 port 2 ==> AMC slot B1 port 2
- Matching Result
- - From AMC slot B1
-- -Channel ID 2 || Lane 0: enable
-- -Link Type: AMC.3 Storage
-- -Link Type extension: Serial Attached SCSI (SAS/SATA)
-- -Link Group ID: 0 || Link Asym. Match: FC or SAS interface {exact match}
-+ \-Channel ID 2 || Lane 0: enable
-+ \-Link Type: AMC.3 Storage
-+ \-Link Type extension: Serial Attached SCSI (SAS/SATA)
-+ \-Link Group ID: 0 || Link Asym. Match: FC or SAS interface {exact match}
- - To AMC slot A2
-- -Channel ID 2 || Lane 0: enable
-- -Link Type: AMC.3 Storage
-- -Link Type extension: Serial Attached SCSI (SAS/SATA)
-- -Link Group ID: 0 || Link Asym. Match: FC or SAS interface {exact match}
-+ \-Channel ID 2 || Lane 0: enable
-+ \-Link Type: AMC.3 Storage
-+ \-Link Type extension: Serial Attached SCSI (SAS/SATA)
-+ \-Link Group ID: 0 || Link Asym. Match: FC or SAS interface {exact match}
- *-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
- .TP
- \fIunmatch\fP <\fBxx=filename\fR> <\fBxx=filename\fR> \fB...\fr
-@@ -2516,7 +2516,7 @@ Remove a policy. If domain is not suppli
- \fIpower\fP \fImin\fP <minimum> \fImax\fP <maximum> [\fIdomain\fP <platform|CPU|Memory>]
- .br
-
--Configure Node Manager power minumum and maximum power draw limits.
-+Configure Node Manager power minimum and maximum power draw limits.
- The \fImin\fP and \fImax\fP values must be in the range of 0-65535.
- If domain is not supplied a default of platform is used.
-
-@@ -3269,7 +3269,7 @@ I2C Master Write\-Read IPMI command.
-
- Execute the service processor command line interface commands.
- Without any command string, an interactive session is started
--in the service processor command line environ ment. If a
-+in the service processor command line environment. If a
- command string is specified, the command string is executed
- on the service processor and the connection is closed.
- .TP
-@@ -3515,7 +3515,7 @@ a 2.4\-based kernel in order for ipmitoo
- Incoming and outgoing message handler for IPMI interfaces.
- .TP
- .B ipmi_kcs_drv
--An IPMI Keyboard Controler Style (KCS) interface driver for the message handler.
-+An IPMI Keyboard Controller Style (KCS) interface driver for the message handler.
- .TP
- .B ipmi_devintf
- Linux character device interface for the message handler.
-@@ -3553,7 +3553,7 @@ ipmitool includes some sample initializa
- can perform this task automatically at start\-up.
-
- In order to have ipmitool use the OpenIPMI device interface
--you can specifiy it on the command line:
-+you can specify it on the command line:
- .PP
- ipmitool \fB\-I\fR \fIopen\fP <\fIcommand\fP>
- .SH "BMC INTERFACE"
-@@ -3664,7 +3664,7 @@ encryption algorightms.
- The ipmitool \fIfree\fP interface utilizes the FreeIPMI libfreeipmi
- drivers.
- .LP
--You can tell ipmitool to use the FreeIPMI interface with the -I option:
-+You can tell ipmitool to use the FreeIPMI interface with the \-I option:
- .PP
- ipmitool \fB\-I\fR \fIfree\fP <\fIcommand\fP>
-
-@@ -3674,7 +3674,7 @@ ipmitool \fB\-I\fR \fIfree\fP <\fIcomman
- The ipmitool \fIimb\fP interface supports the Intel IMB (Intel
- Inter-module Bus) Interface through the /dev/imb device.
- .LP
--You can tell ipmitool to use the IMB interface with the -I option:
-+You can tell ipmitool to use the IMB interface with the \-I option:
- .PP
- ipmitool \fB\-I\fR \fIimb\fP <\fIcommand\fP>
-
generated by cgit v1.2.3 (git 2.25.1) at 2024-04-25 02:26:12 +0000