summaryrefslogtreecommitdiff
path: root/debian/patches/20_ipmi_impi.dpatch
diff options
context:
space:
mode:
Diffstat (limited to 'debian/patches/20_ipmi_impi.dpatch')
-rw-r--r--debian/patches/20_ipmi_impi.dpatch340
1 files changed, 340 insertions, 0 deletions
diff --git a/debian/patches/20_ipmi_impi.dpatch b/debian/patches/20_ipmi_impi.dpatch
new file mode 100644
index 0000000..d966a1d
--- /dev/null
+++ b/debian/patches/20_ipmi_impi.dpatch
@@ -0,0 +1,340 @@
+#! /bin/sh /usr/share/dpatch/dpatch-run
+## 20ipmi_impi.dpatch by <mjj29@debian.org>
+##
+## All lines beginning with `## DP:' are a description of the patch.
+## DP: 20ipmi_impi, closes #412816
+
+@DPATCH@
+
+--- ipmitool-1.8.9-rc1/lib/ipmi_strings.c.orig 2005-05-15 06:26:33.000000000 +0200
++++ ipmitool-1.8.9-rc1/lib/ipmi_strings.c 2005-10-23 15:22:57.000000000 +0200
+@@ -43,7 +43,7 @@
+ /*
+ * From table 26-4 of the IPMI v2 specification
+ */
+-const struct valstr impi_bit_rate_vals[] = {
++const struct valstr ipmi_bit_rate_vals[] = {
+ { 0x00, "IPMI-Over-Serial-Setting"}, /* Using the value in the IPMI Over Serial Config */
+ { 0x06, "9.6" },
+ { 0x07, "19.2" },
+--- ipmitool-1.8.9-rc1/lib/ipmi_sol.c.orig 2006-08-02 19:17:10.000000000 +0200
++++ ipmitool-1.8.9-rc1/lib/ipmi_sol.c 2006-08-25 16:01:54.000000000 +0200
+@@ -108,7 +108,7 @@
+
+ memset(&req, 0, sizeof(req));
+ req.msg.netfn = IPMI_NETFN_TRANSPORT;
+- req.msg.cmd = IMPI_GET_SOL_CONFIG_PARAMETERS;
++ req.msg.cmd = IPMI_GET_SOL_CONFIG_PARAMETERS;
+ req.msg.data_len = 4;
+ req.msg.data = data;
+
+@@ -485,10 +485,10 @@
+ printf("%d,", params.retry_interval * 10);
+
+ printf("%s,",
+- val2str(params.volatile_bit_rate, impi_bit_rate_vals));
++ val2str(params.volatile_bit_rate, ipmi_bit_rate_vals));
+
+ printf("%s,",
+- val2str(params.non_volatile_bit_rate, impi_bit_rate_vals));
++ val2str(params.non_volatile_bit_rate, ipmi_bit_rate_vals));
+
+ printf("%d,", params.payload_channel);
+ printf("%d\n", params.payload_port);
+@@ -516,10 +516,10 @@
+ params.retry_interval * 10);
+
+ printf("Volatile Bit Rate (kbps) : %s\n",
+- val2str(params.volatile_bit_rate, impi_bit_rate_vals));
++ val2str(params.volatile_bit_rate, ipmi_bit_rate_vals));
+
+ printf("Non-Volatile Bit Rate (kbps) : %s\n",
+- val2str(params.non_volatile_bit_rate, impi_bit_rate_vals));
++ val2str(params.non_volatile_bit_rate, ipmi_bit_rate_vals));
+
+ printf("Payload Channel : %d (0x%02x)\n",
+ params.payload_channel, params.payload_channel);
+@@ -554,7 +554,7 @@
+
+ memset(&req, 0, sizeof(req));
+ req.msg.netfn = IPMI_NETFN_TRANSPORT; /* 0x0c */
+- req.msg.cmd = IMPI_SET_SOL_CONFIG_PARAMETERS; /* 0x21 */
++ req.msg.cmd = IPMI_SET_SOL_CONFIG_PARAMETERS; /* 0x21 */
+ req.msg.data = data;
+
+ data[0] = channel;
+@@ -1105,7 +1105,7 @@
+
+
+ /*
+- * impi_sol_deactivate
++ * ipmi_sol_deactivate
+ */
+ static int
+ ipmi_sol_deactivate(struct ipmi_intf * intf)
+@@ -1451,7 +1451,7 @@
+
+
+ /*
+- * impi_sol_activate
++ * ipmi_sol_activate
+ */
+ static int
+ ipmi_sol_activate(struct ipmi_intf * intf, int looptest, int interval)
+--- ipmitool-1.8.9-rc1/include/ipmitool/ipmi_intf.h.orig 2005-04-21 01:03:57.000000000 +0200
++++ ipmitool-1.8.9-rc1/include/ipmitool/ipmi_intf.h 2005-10-23 16:07:56.000000000 +0200
+@@ -96,7 +96,7 @@
+ socklen_t addrlen;
+
+ /*
+- * This struct holds state data specific to IMPI v2 / RMCP+ sessions
++ * This struct holds state data specific to IPMI v2 / RMCP+ sessions
+ */
+ struct {
+ enum LANPLUS_SESSION_STATE session_state;
+--- ipmitool-1.8.9-rc1/include/ipmitool/ipmi_user.h.orig 2005-01-07 03:05:45.000000000 +0100
++++ ipmitool-1.8.9-rc1/include/ipmitool/ipmi_user.h 2005-10-23 16:08:25.000000000 +0200
+@@ -44,7 +44,7 @@
+
+
+ /*
+- * The GET USER ACCESS response from table 22-32 of the IMPI v2.0 spec
++ * The GET USER ACCESS response from table 22-32 of the IPMI v2.0 spec
+ */
+ struct user_access_rsp {
+ #if WORDS_BIGENDIAN
+--- ipmitool-1.8.9-rc1/include/ipmitool/ipmi_strings.h.orig 2005-05-11 07:46:40.000000000 +0200
++++ ipmitool-1.8.9-rc1/include/ipmitool/ipmi_strings.h 2005-10-23 15:22:19.000000000 +0200
+@@ -45,7 +45,7 @@
+
+ extern const struct valstr ipmi_channel_activity_type_vals[];
+ extern const struct valstr ipmi_privlvl_vals[];
+-extern const struct valstr impi_bit_rate_vals[];
++extern const struct valstr ipmi_bit_rate_vals[];
+ extern const struct valstr ipmi_set_in_progress_vals[];
+ extern const struct valstr ipmi_authtype_session_vals[];
+ extern const struct valstr ipmi_authtype_vals[];
+--- ipmitool-1.8.9-rc1/include/ipmitool/ipmi_constants.h.orig 2005-05-11 07:46:40.000000000 +0200
++++ ipmitool-1.8.9-rc1/include/ipmitool/ipmi_constants.h 2005-10-23 16:08:13.000000000 +0200
+@@ -42,9 +42,9 @@
+ * COMMANDS
+ */
+ #define IPMI_GET_SDR_REPOSITORY_INFO 0x20
+-#define IMPI_SOL_ACTIVATING 0x20
+-#define IMPI_SET_SOL_CONFIG_PARAMETERS 0x21
+-#define IMPI_GET_SOL_CONFIG_PARAMETERS 0x22
++#define IPMI_SOL_ACTIVATING 0x20
++#define IPMI_SET_SOL_CONFIG_PARAMETERS 0x21
++#define IPMI_GET_SOL_CONFIG_PARAMETERS 0x22
+ #define IPMI_SET_USER_ACCESS 0x43
+ #define IPMI_GET_USER_ACCESS 0x44
+ #define IPMI_SET_USER_NAME 0x45
+--- ipmitool-1.8.9-rc1/src/plugins/lanplus/lanplus.c.orig 2006-08-03 18:26:06.000000000 +0200
++++ ipmitool-1.8.9-rc1/src/plugins/lanplus/lanplus.c 2006-08-25 16:06:37.000000000 +0200
+@@ -862,7 +862,7 @@
+ /*
+ * read_open_session_reponse
+ *
+- * Initialize the ipmi_rs from the IMPI 2.x open session response data.
++ * Initialize the ipmi_rs from the IPMI 2.x open session response data.
+ *
+ * The offset should point to the first byte of the the Open Session Response
+ * payload when this function is called.
+@@ -924,7 +924,7 @@
+ /*
+ * read_rakp2_message
+ *
+- * Initialize the ipmi_rs from the IMPI 2.x RAKP 2 message
++ * Initialize the ipmi_rs from the IPMI 2.x RAKP 2 message
+ *
+ * The offset should point the first byte of the the RAKP 2 payload when this
+ * function is called.
+@@ -1004,7 +1004,7 @@
+ /*
+ * read_rakp4_message
+ *
+- * Initialize the ipmi_rs from the IMPI 2.x RAKP 4 message
++ * Initialize the ipmi_rs from the IPMI 2.x RAKP 4 message
+ *
+ * The offset should point the first byte of the the RAKP 4 payload when this
+ * function is called.
+@@ -1212,7 +1212,7 @@
+ /*
+ * read_ipmi_response
+ *
+- * Initialize the impi_rs from with the IPMI response specific data
++ * Initialize the ipmi_rs from with the IPMI response specific data
+ *
+ * The offset should point the first byte of the the IPMI payload when this
+ * function is called.
+@@ -1244,7 +1244,7 @@
+ /*
+ * read_sol_packet
+ *
+- * Initialize the impi_rs with the SOL response data
++ * Initialize the ipmi_rs with the SOL response data
+ *
+ * The offset should point the first byte of the the SOL payload when this
+ * function is called.
+@@ -1562,32 +1562,32 @@
+ *------------------------------------------
+ */
+ /* ipmi session Auth Type / Format is always 0x06 for IPMI v2 */
+- msg[IMPI_LANPLUS_OFFSET_AUTHTYPE] = 0x06;
++ msg[IPMI_LANPLUS_OFFSET_AUTHTYPE] = 0x06;
+
+ /* Payload Type -- also specifies whether were authenticated/encyrpted */
+- msg[IMPI_LANPLUS_OFFSET_PAYLOAD_TYPE] = payload->payload_type;
++ msg[IPMI_LANPLUS_OFFSET_PAYLOAD_TYPE] = payload->payload_type;
+
+ if (session->v2_data.session_state == LANPLUS_STATE_ACTIVE)
+ {
+- msg[IMPI_LANPLUS_OFFSET_PAYLOAD_TYPE] |=
++ msg[IPMI_LANPLUS_OFFSET_PAYLOAD_TYPE] |=
+ ((session->v2_data.crypt_alg != IPMI_CRYPT_NONE )? 0x80 : 0x00);
+- msg[IMPI_LANPLUS_OFFSET_PAYLOAD_TYPE] |=
++ msg[IPMI_LANPLUS_OFFSET_PAYLOAD_TYPE] |=
+ ((session->v2_data.integrity_alg != IPMI_INTEGRITY_NONE)? 0x40 : 0x00);
+ }
+
+ if (session->v2_data.session_state == LANPLUS_STATE_ACTIVE)
+ {
+ /* Session ID -- making it LSB */
+- msg[IMPI_LANPLUS_OFFSET_SESSION_ID ] = session->v2_data.bmc_id & 0xff;
+- msg[IMPI_LANPLUS_OFFSET_SESSION_ID + 1] = (session->v2_data.bmc_id >> 8) & 0xff;
+- msg[IMPI_LANPLUS_OFFSET_SESSION_ID + 2] = (session->v2_data.bmc_id >> 16) & 0xff;
+- msg[IMPI_LANPLUS_OFFSET_SESSION_ID + 3] = (session->v2_data.bmc_id >> 24) & 0xff;
++ msg[IPMI_LANPLUS_OFFSET_SESSION_ID ] = session->v2_data.bmc_id & 0xff;
++ msg[IPMI_LANPLUS_OFFSET_SESSION_ID + 1] = (session->v2_data.bmc_id >> 8) & 0xff;
++ msg[IPMI_LANPLUS_OFFSET_SESSION_ID + 2] = (session->v2_data.bmc_id >> 16) & 0xff;
++ msg[IPMI_LANPLUS_OFFSET_SESSION_ID + 3] = (session->v2_data.bmc_id >> 24) & 0xff;
+
+ /* Sequence Number -- making it LSB */
+- msg[IMPI_LANPLUS_OFFSET_SEQUENCE_NUM ] = session->out_seq & 0xff;
+- msg[IMPI_LANPLUS_OFFSET_SEQUENCE_NUM + 1] = (session->out_seq >> 8) & 0xff;
+- msg[IMPI_LANPLUS_OFFSET_SEQUENCE_NUM + 2] = (session->out_seq >> 16) & 0xff;
+- msg[IMPI_LANPLUS_OFFSET_SEQUENCE_NUM + 3] = (session->out_seq >> 24) & 0xff;
++ msg[IPMI_LANPLUS_OFFSET_SEQUENCE_NUM ] = session->out_seq & 0xff;
++ msg[IPMI_LANPLUS_OFFSET_SEQUENCE_NUM + 1] = (session->out_seq >> 8) & 0xff;
++ msg[IPMI_LANPLUS_OFFSET_SEQUENCE_NUM + 2] = (session->out_seq >> 16) & 0xff;
++ msg[IPMI_LANPLUS_OFFSET_SEQUENCE_NUM + 3] = (session->out_seq >> 24) & 0xff;
+ }
+
+ /*
+@@ -1679,9 +1679,9 @@
+ }
+
+ /* Now we know the payload length */
+- msg[IMPI_LANPLUS_OFFSET_PAYLOAD_SIZE ] =
++ msg[IPMI_LANPLUS_OFFSET_PAYLOAD_SIZE ] =
+ payload->payload_length & 0xff;
+- msg[IMPI_LANPLUS_OFFSET_PAYLOAD_SIZE + 1] =
++ msg[IPMI_LANPLUS_OFFSET_PAYLOAD_SIZE + 1] =
+ (payload->payload_length >> 8) & 0xff;
+
+
+@@ -1745,14 +1745,14 @@
+ 2;
+
+ if (verbose > 2)
+- printbuf(msg + IMPI_LANPLUS_OFFSET_AUTHTYPE, hmac_input_size, "authcode input");
++ printbuf(msg + IPMI_LANPLUS_OFFSET_AUTHTYPE, hmac_input_size, "authcode input");
+
+
+ /* Auth Code */
+ lanplus_HMAC(session->v2_data.integrity_alg,
+ session->v2_data.k1, /* key */
+ 20, /* key length */
+- msg + IMPI_LANPLUS_OFFSET_AUTHTYPE, /* hmac input */
++ msg + IPMI_LANPLUS_OFFSET_AUTHTYPE, /* hmac input */
+ hmac_input_size,
+ hmac_output,
+ &hmac_length);
+@@ -2529,7 +2529,7 @@
+ * ipmi_get_auth_capabilities_cmd
+ *
+ * This command may have to be sent twice. We first ask for the
+- * authentication capabilities with the "request IMPI v2 data bit"
++ * authentication capabilities with the "request IPMI v2 data bit"
+ * set. If this fails, we send the same command without that bit
+ * set.
+ *
+@@ -2602,7 +2602,7 @@
+
+
+ static int
+-impi_close_session_cmd(struct ipmi_intf * intf)
++ipmi_close_session_cmd(struct ipmi_intf * intf)
+ {
+ struct ipmi_rs * rsp;
+ struct ipmi_rq req;
+@@ -2836,7 +2836,7 @@
+ /*
+ * ipmi_lanplus_rakp1
+ *
+- * Build and send the RAKP 1 message as part of the IMPI v2 / RMCP+ session
++ * Build and send the RAKP 1 message as part of the IPMI v2 / RMCP+ session
+ * negotiation protocol. We also read and validate the RAKP 2 message received
+ * from the BMC, here. See section 13.20 of the IPMI v2 specification for
+ * details.
+@@ -2990,7 +2990,7 @@
+ /*
+ * ipmi_lanplus_rakp3
+ *
+- * Build and send the RAKP 3 message as part of the IMPI v2 / RMCP+ session
++ * Build and send the RAKP 3 message as part of the IPMI v2 / RMCP+ session
+ * negotiation protocol. We also read and validate the RAKP 4 message received
+ * from the BMC, here. See section 13.20 of the IPMI v2 specification for
+ * details.
+@@ -3154,7 +3154,7 @@
+ ipmi_lanplus_close(struct ipmi_intf * intf)
+ {
+ if (!intf->abort)
+- impi_close_session_cmd(intf);
++ ipmi_close_session_cmd(intf);
+
+ if (intf->fd >= 0)
+ close(intf->fd);
+--- ipmitool-1.8.9-rc1/src/plugins/lanplus/lanplus.h.orig 2005-03-17 00:17:37.000000000 +0100
++++ ipmitool-1.8.9-rc1/src/plugins/lanplus/lanplus.h 2005-10-23 16:09:48.000000000 +0200
+@@ -84,11 +84,11 @@
+
+
+ /* Session message offsets, from table 13-8 of the v2 specification */
+-#define IMPI_LANPLUS_OFFSET_AUTHTYPE 0x04
+-#define IMPI_LANPLUS_OFFSET_PAYLOAD_TYPE 0x05
+-#define IMPI_LANPLUS_OFFSET_SESSION_ID 0x06
+-#define IMPI_LANPLUS_OFFSET_SEQUENCE_NUM 0x0A
+-#define IMPI_LANPLUS_OFFSET_PAYLOAD_SIZE 0x0E
++#define IPMI_LANPLUS_OFFSET_AUTHTYPE 0x04
++#define IPMI_LANPLUS_OFFSET_PAYLOAD_TYPE 0x05
++#define IPMI_LANPLUS_OFFSET_SESSION_ID 0x06
++#define IPMI_LANPLUS_OFFSET_SEQUENCE_NUM 0x0A
++#define IPMI_LANPLUS_OFFSET_PAYLOAD_SIZE 0x0E
+ #define IPMI_LANPLUS_OFFSET_PAYLOAD 0x10
+
+
+--- ipmitool-1.8.9-rc1/src/plugins/lanplus/lanplus_crypt.c.orig 2005-03-24 02:46:03.000000000 +0100
++++ ipmitool-1.8.9-rc1/src/plugins/lanplus/lanplus_crypt.c 2005-10-23 16:10:06.000000000 +0200
+@@ -800,8 +800,8 @@
+ lanplus_HMAC(session->v2_data.integrity_alg,
+ session->v2_data.k1,
+ IPMI_AUTHCODE_BUFFER_SIZE,
+- rs->data + IMPI_LANPLUS_OFFSET_AUTHTYPE,
+- rs->data_len - IMPI_LANPLUS_OFFSET_AUTHTYPE - IPMI_SHA1_AUTHCODE_SIZE,
++ rs->data + IPMI_LANPLUS_OFFSET_AUTHTYPE,
++ rs->data_len - IPMI_LANPLUS_OFFSET_AUTHTYPE - IPMI_SHA1_AUTHCODE_SIZE,
+ generated_authcode,
+ &generated_authcode_length);
+
+@@ -809,8 +809,8 @@
+ {
+ lprintf(LOG_DEBUG+2, "Validating authcode");
+ printbuf(session->v2_data.k1, 20, "K1");
+- printbuf(rs->data + IMPI_LANPLUS_OFFSET_AUTHTYPE,
+- rs->data_len - IMPI_LANPLUS_OFFSET_AUTHTYPE - IPMI_SHA1_AUTHCODE_SIZE,
++ printbuf(rs->data + IPMI_LANPLUS_OFFSET_AUTHTYPE,
++ rs->data_len - IPMI_LANPLUS_OFFSET_AUTHTYPE - IPMI_SHA1_AUTHCODE_SIZE,
+ "Authcode Input Data");
+ printbuf(generated_authcode, 12, "Generated authcode");
+ printbuf(bmc_authcode, 12, "Expected authcode");