diff options
Diffstat (limited to 'debian/patches/20_ipmi_impi')
| -rw-r--r-- | debian/patches/20_ipmi_impi | 335 |
1 files changed, 335 insertions, 0 deletions
diff --git a/debian/patches/20_ipmi_impi b/debian/patches/20_ipmi_impi new file mode 100644 index 0000000..dd5a770 --- /dev/null +++ b/debian/patches/20_ipmi_impi @@ -0,0 +1,335 @@ +## 20ipmi_impi.dpatch by <mjj29@debian.org> +## +## 20ipmi_impi, closes #412816 +--- ipmitool-1.8.9-rc1/lib/ipmi_strings.c.orig 2005-05-15 06:26:33.000000000 +0200 ++++ ipmitool-1.8.9-rc1/lib/ipmi_strings.c 2005-10-23 15:22:57.000000000 +0200 +@@ -43,7 +43,7 @@ + /* + * From table 26-4 of the IPMI v2 specification + */ +-const struct valstr impi_bit_rate_vals[] = { ++const struct valstr ipmi_bit_rate_vals[] = { + { 0x00, "IPMI-Over-Serial-Setting"}, /* Using the value in the IPMI Over Serial Config */ + { 0x06, "9.6" }, + { 0x07, "19.2" }, +--- ipmitool-1.8.9-rc1/lib/ipmi_sol.c.orig 2006-08-02 19:17:10.000000000 +0200 ++++ ipmitool-1.8.9-rc1/lib/ipmi_sol.c 2006-08-25 16:01:54.000000000 +0200 +@@ -108,7 +108,7 @@ + + memset(&req, 0, sizeof(req)); + req.msg.netfn = IPMI_NETFN_TRANSPORT; +- req.msg.cmd = IMPI_GET_SOL_CONFIG_PARAMETERS; ++ req.msg.cmd = IPMI_GET_SOL_CONFIG_PARAMETERS; + req.msg.data_len = 4; + req.msg.data = data; + +@@ -485,10 +485,10 @@ + printf("%d,", params.retry_interval * 10); + + printf("%s,", +- val2str(params.volatile_bit_rate, impi_bit_rate_vals)); ++ val2str(params.volatile_bit_rate, ipmi_bit_rate_vals)); + + printf("%s,", +- val2str(params.non_volatile_bit_rate, impi_bit_rate_vals)); ++ val2str(params.non_volatile_bit_rate, ipmi_bit_rate_vals)); + + printf("%d,", params.payload_channel); + printf("%d\n", params.payload_port); +@@ -516,10 +516,10 @@ + params.retry_interval * 10); + + printf("Volatile Bit Rate (kbps) : %s\n", +- val2str(params.volatile_bit_rate, impi_bit_rate_vals)); ++ val2str(params.volatile_bit_rate, ipmi_bit_rate_vals)); + + printf("Non-Volatile Bit Rate (kbps) : %s\n", +- val2str(params.non_volatile_bit_rate, impi_bit_rate_vals)); ++ val2str(params.non_volatile_bit_rate, ipmi_bit_rate_vals)); + + printf("Payload Channel : %d (0x%02x)\n", + params.payload_channel, params.payload_channel); +@@ -554,7 +554,7 @@ + + memset(&req, 0, sizeof(req)); + req.msg.netfn = IPMI_NETFN_TRANSPORT; /* 0x0c */ +- req.msg.cmd = IMPI_SET_SOL_CONFIG_PARAMETERS; /* 0x21 */ ++ req.msg.cmd = IPMI_SET_SOL_CONFIG_PARAMETERS; /* 0x21 */ + req.msg.data = data; + + data[0] = channel; +@@ -1105,7 +1105,7 @@ + + + /* +- * impi_sol_deactivate ++ * ipmi_sol_deactivate + */ + static int + ipmi_sol_deactivate(struct ipmi_intf * intf) +@@ -1451,7 +1451,7 @@ + + + /* +- * impi_sol_activate ++ * ipmi_sol_activate + */ + static int + ipmi_sol_activate(struct ipmi_intf * intf, int looptest, int interval) +--- ipmitool-1.8.9-rc1/include/ipmitool/ipmi_intf.h.orig 2005-04-21 01:03:57.000000000 +0200 ++++ ipmitool-1.8.9-rc1/include/ipmitool/ipmi_intf.h 2005-10-23 16:07:56.000000000 +0200 +@@ -96,7 +96,7 @@ + socklen_t addrlen; + + /* +- * This struct holds state data specific to IMPI v2 / RMCP+ sessions ++ * This struct holds state data specific to IPMI v2 / RMCP+ sessions + */ + struct { + enum LANPLUS_SESSION_STATE session_state; +--- ipmitool-1.8.9-rc1/include/ipmitool/ipmi_user.h.orig 2005-01-07 03:05:45.000000000 +0100 ++++ ipmitool-1.8.9-rc1/include/ipmitool/ipmi_user.h 2005-10-23 16:08:25.000000000 +0200 +@@ -44,7 +44,7 @@ + + + /* +- * The GET USER ACCESS response from table 22-32 of the IMPI v2.0 spec ++ * The GET USER ACCESS response from table 22-32 of the IPMI v2.0 spec + */ + struct user_access_rsp { + #if WORDS_BIGENDIAN +--- ipmitool-1.8.9-rc1/include/ipmitool/ipmi_strings.h.orig 2005-05-11 07:46:40.000000000 +0200 ++++ ipmitool-1.8.9-rc1/include/ipmitool/ipmi_strings.h 2005-10-23 15:22:19.000000000 +0200 +@@ -45,7 +45,7 @@ + + extern const struct valstr ipmi_channel_activity_type_vals[]; + extern const struct valstr ipmi_privlvl_vals[]; +-extern const struct valstr impi_bit_rate_vals[]; ++extern const struct valstr ipmi_bit_rate_vals[]; + extern const struct valstr ipmi_set_in_progress_vals[]; + extern const struct valstr ipmi_authtype_session_vals[]; + extern const struct valstr ipmi_authtype_vals[]; +--- ipmitool-1.8.9-rc1/include/ipmitool/ipmi_constants.h.orig 2005-05-11 07:46:40.000000000 +0200 ++++ ipmitool-1.8.9-rc1/include/ipmitool/ipmi_constants.h 2005-10-23 16:08:13.000000000 +0200 +@@ -42,9 +42,9 @@ + * COMMANDS + */ + #define IPMI_GET_SDR_REPOSITORY_INFO 0x20 +-#define IMPI_SOL_ACTIVATING 0x20 +-#define IMPI_SET_SOL_CONFIG_PARAMETERS 0x21 +-#define IMPI_GET_SOL_CONFIG_PARAMETERS 0x22 ++#define IPMI_SOL_ACTIVATING 0x20 ++#define IPMI_SET_SOL_CONFIG_PARAMETERS 0x21 ++#define IPMI_GET_SOL_CONFIG_PARAMETERS 0x22 + #define IPMI_SET_USER_ACCESS 0x43 + #define IPMI_GET_USER_ACCESS 0x44 + #define IPMI_SET_USER_NAME 0x45 +--- ipmitool-1.8.9-rc1/src/plugins/lanplus/lanplus.c.orig 2006-08-03 18:26:06.000000000 +0200 ++++ ipmitool-1.8.9-rc1/src/plugins/lanplus/lanplus.c 2006-08-25 16:06:37.000000000 +0200 +@@ -862,7 +862,7 @@ + /* + * read_open_session_reponse + * +- * Initialize the ipmi_rs from the IMPI 2.x open session response data. ++ * Initialize the ipmi_rs from the IPMI 2.x open session response data. + * + * The offset should point to the first byte of the the Open Session Response + * payload when this function is called. +@@ -924,7 +924,7 @@ + /* + * read_rakp2_message + * +- * Initialize the ipmi_rs from the IMPI 2.x RAKP 2 message ++ * Initialize the ipmi_rs from the IPMI 2.x RAKP 2 message + * + * The offset should point the first byte of the the RAKP 2 payload when this + * function is called. +@@ -1004,7 +1004,7 @@ + /* + * read_rakp4_message + * +- * Initialize the ipmi_rs from the IMPI 2.x RAKP 4 message ++ * Initialize the ipmi_rs from the IPMI 2.x RAKP 4 message + * + * The offset should point the first byte of the the RAKP 4 payload when this + * function is called. +@@ -1212,7 +1212,7 @@ + /* + * read_ipmi_response + * +- * Initialize the impi_rs from with the IPMI response specific data ++ * Initialize the ipmi_rs from with the IPMI response specific data + * + * The offset should point the first byte of the the IPMI payload when this + * function is called. +@@ -1244,7 +1244,7 @@ + /* + * read_sol_packet + * +- * Initialize the impi_rs with the SOL response data ++ * Initialize the ipmi_rs with the SOL response data + * + * The offset should point the first byte of the the SOL payload when this + * function is called. +@@ -1562,32 +1562,32 @@ + *------------------------------------------ + */ + /* ipmi session Auth Type / Format is always 0x06 for IPMI v2 */ +- msg[IMPI_LANPLUS_OFFSET_AUTHTYPE] = 0x06; ++ msg[IPMI_LANPLUS_OFFSET_AUTHTYPE] = 0x06; + + /* Payload Type -- also specifies whether were authenticated/encyrpted */ +- msg[IMPI_LANPLUS_OFFSET_PAYLOAD_TYPE] = payload->payload_type; ++ msg[IPMI_LANPLUS_OFFSET_PAYLOAD_TYPE] = payload->payload_type; + + if (session->v2_data.session_state == LANPLUS_STATE_ACTIVE) + { +- msg[IMPI_LANPLUS_OFFSET_PAYLOAD_TYPE] |= ++ msg[IPMI_LANPLUS_OFFSET_PAYLOAD_TYPE] |= + ((session->v2_data.crypt_alg != IPMI_CRYPT_NONE )? 0x80 : 0x00); +- msg[IMPI_LANPLUS_OFFSET_PAYLOAD_TYPE] |= ++ msg[IPMI_LANPLUS_OFFSET_PAYLOAD_TYPE] |= + ((session->v2_data.integrity_alg != IPMI_INTEGRITY_NONE)? 0x40 : 0x00); + } + + if (session->v2_data.session_state == LANPLUS_STATE_ACTIVE) + { + /* Session ID -- making it LSB */ +- msg[IMPI_LANPLUS_OFFSET_SESSION_ID ] = session->v2_data.bmc_id & 0xff; +- msg[IMPI_LANPLUS_OFFSET_SESSION_ID + 1] = (session->v2_data.bmc_id >> 8) & 0xff; +- msg[IMPI_LANPLUS_OFFSET_SESSION_ID + 2] = (session->v2_data.bmc_id >> 16) & 0xff; +- msg[IMPI_LANPLUS_OFFSET_SESSION_ID + 3] = (session->v2_data.bmc_id >> 24) & 0xff; ++ msg[IPMI_LANPLUS_OFFSET_SESSION_ID ] = session->v2_data.bmc_id & 0xff; ++ msg[IPMI_LANPLUS_OFFSET_SESSION_ID + 1] = (session->v2_data.bmc_id >> 8) & 0xff; ++ msg[IPMI_LANPLUS_OFFSET_SESSION_ID + 2] = (session->v2_data.bmc_id >> 16) & 0xff; ++ msg[IPMI_LANPLUS_OFFSET_SESSION_ID + 3] = (session->v2_data.bmc_id >> 24) & 0xff; + + /* Sequence Number -- making it LSB */ +- msg[IMPI_LANPLUS_OFFSET_SEQUENCE_NUM ] = session->out_seq & 0xff; +- msg[IMPI_LANPLUS_OFFSET_SEQUENCE_NUM + 1] = (session->out_seq >> 8) & 0xff; +- msg[IMPI_LANPLUS_OFFSET_SEQUENCE_NUM + 2] = (session->out_seq >> 16) & 0xff; +- msg[IMPI_LANPLUS_OFFSET_SEQUENCE_NUM + 3] = (session->out_seq >> 24) & 0xff; ++ msg[IPMI_LANPLUS_OFFSET_SEQUENCE_NUM ] = session->out_seq & 0xff; ++ msg[IPMI_LANPLUS_OFFSET_SEQUENCE_NUM + 1] = (session->out_seq >> 8) & 0xff; ++ msg[IPMI_LANPLUS_OFFSET_SEQUENCE_NUM + 2] = (session->out_seq >> 16) & 0xff; ++ msg[IPMI_LANPLUS_OFFSET_SEQUENCE_NUM + 3] = (session->out_seq >> 24) & 0xff; + } + + /* +@@ -1679,9 +1679,9 @@ + } + + /* Now we know the payload length */ +- msg[IMPI_LANPLUS_OFFSET_PAYLOAD_SIZE ] = ++ msg[IPMI_LANPLUS_OFFSET_PAYLOAD_SIZE ] = + payload->payload_length & 0xff; +- msg[IMPI_LANPLUS_OFFSET_PAYLOAD_SIZE + 1] = ++ msg[IPMI_LANPLUS_OFFSET_PAYLOAD_SIZE + 1] = + (payload->payload_length >> 8) & 0xff; + + +@@ -1745,14 +1745,14 @@ + 2; + + if (verbose > 2) +- printbuf(msg + IMPI_LANPLUS_OFFSET_AUTHTYPE, hmac_input_size, "authcode input"); ++ printbuf(msg + IPMI_LANPLUS_OFFSET_AUTHTYPE, hmac_input_size, "authcode input"); + + + /* Auth Code */ + lanplus_HMAC(session->v2_data.integrity_alg, + session->v2_data.k1, /* key */ + 20, /* key length */ +- msg + IMPI_LANPLUS_OFFSET_AUTHTYPE, /* hmac input */ ++ msg + IPMI_LANPLUS_OFFSET_AUTHTYPE, /* hmac input */ + hmac_input_size, + hmac_output, + &hmac_length); +@@ -2529,7 +2529,7 @@ + * ipmi_get_auth_capabilities_cmd + * + * This command may have to be sent twice. We first ask for the +- * authentication capabilities with the "request IMPI v2 data bit" ++ * authentication capabilities with the "request IPMI v2 data bit" + * set. If this fails, we send the same command without that bit + * set. + * +@@ -2602,7 +2602,7 @@ + + + static int +-impi_close_session_cmd(struct ipmi_intf * intf) ++ipmi_close_session_cmd(struct ipmi_intf * intf) + { + struct ipmi_rs * rsp; + struct ipmi_rq req; +@@ -2836,7 +2836,7 @@ + /* + * ipmi_lanplus_rakp1 + * +- * Build and send the RAKP 1 message as part of the IMPI v2 / RMCP+ session ++ * Build and send the RAKP 1 message as part of the IPMI v2 / RMCP+ session + * negotiation protocol. We also read and validate the RAKP 2 message received + * from the BMC, here. See section 13.20 of the IPMI v2 specification for + * details. +@@ -2990,7 +2990,7 @@ + /* + * ipmi_lanplus_rakp3 + * +- * Build and send the RAKP 3 message as part of the IMPI v2 / RMCP+ session ++ * Build and send the RAKP 3 message as part of the IPMI v2 / RMCP+ session + * negotiation protocol. We also read and validate the RAKP 4 message received + * from the BMC, here. See section 13.20 of the IPMI v2 specification for + * details. +@@ -3154,7 +3154,7 @@ + ipmi_lanplus_close(struct ipmi_intf * intf) + { + if (!intf->abort) +- impi_close_session_cmd(intf); ++ ipmi_close_session_cmd(intf); + + if (intf->fd >= 0) + close(intf->fd); +--- ipmitool-1.8.9-rc1/src/plugins/lanplus/lanplus.h.orig 2005-03-17 00:17:37.000000000 +0100 ++++ ipmitool-1.8.9-rc1/src/plugins/lanplus/lanplus.h 2005-10-23 16:09:48.000000000 +0200 +@@ -84,11 +84,11 @@ + + + /* Session message offsets, from table 13-8 of the v2 specification */ +-#define IMPI_LANPLUS_OFFSET_AUTHTYPE 0x04 +-#define IMPI_LANPLUS_OFFSET_PAYLOAD_TYPE 0x05 +-#define IMPI_LANPLUS_OFFSET_SESSION_ID 0x06 +-#define IMPI_LANPLUS_OFFSET_SEQUENCE_NUM 0x0A +-#define IMPI_LANPLUS_OFFSET_PAYLOAD_SIZE 0x0E ++#define IPMI_LANPLUS_OFFSET_AUTHTYPE 0x04 ++#define IPMI_LANPLUS_OFFSET_PAYLOAD_TYPE 0x05 ++#define IPMI_LANPLUS_OFFSET_SESSION_ID 0x06 ++#define IPMI_LANPLUS_OFFSET_SEQUENCE_NUM 0x0A ++#define IPMI_LANPLUS_OFFSET_PAYLOAD_SIZE 0x0E + #define IPMI_LANPLUS_OFFSET_PAYLOAD 0x10 + + +--- ipmitool-1.8.9-rc1/src/plugins/lanplus/lanplus_crypt.c.orig 2005-03-24 02:46:03.000000000 +0100 ++++ ipmitool-1.8.9-rc1/src/plugins/lanplus/lanplus_crypt.c 2005-10-23 16:10:06.000000000 +0200 +@@ -800,8 +800,8 @@ + lanplus_HMAC(session->v2_data.integrity_alg, + session->v2_data.k1, + IPMI_AUTHCODE_BUFFER_SIZE, +- rs->data + IMPI_LANPLUS_OFFSET_AUTHTYPE, +- rs->data_len - IMPI_LANPLUS_OFFSET_AUTHTYPE - IPMI_SHA1_AUTHCODE_SIZE, ++ rs->data + IPMI_LANPLUS_OFFSET_AUTHTYPE, ++ rs->data_len - IPMI_LANPLUS_OFFSET_AUTHTYPE - IPMI_SHA1_AUTHCODE_SIZE, + generated_authcode, + &generated_authcode_length); + +@@ -809,8 +809,8 @@ + { + lprintf(LOG_DEBUG+2, "Validating authcode"); + printbuf(session->v2_data.k1, 20, "K1"); +- printbuf(rs->data + IMPI_LANPLUS_OFFSET_AUTHTYPE, +- rs->data_len - IMPI_LANPLUS_OFFSET_AUTHTYPE - IPMI_SHA1_AUTHCODE_SIZE, ++ printbuf(rs->data + IPMI_LANPLUS_OFFSET_AUTHTYPE, ++ rs->data_len - IPMI_LANPLUS_OFFSET_AUTHTYPE - IPMI_SHA1_AUTHCODE_SIZE, + "Authcode Input Data"); + printbuf(generated_authcode, 12, "Generated authcode"); + printbuf(bmc_authcode, 12, "Expected authcode"); |