diff options
Diffstat (limited to 'ipmitool.spec')
| -rw-r--r-- | ipmitool.spec | 404 |
1 files changed, 0 insertions, 404 deletions
diff --git a/ipmitool.spec b/ipmitool.spec deleted file mode 100644 index bbc7c49..0000000 --- a/ipmitool.spec +++ /dev/null @@ -1,404 +0,0 @@ -Name: ipmitool -Summary: ipmitool - Utility for IPMI control -Version: 1.8.18 -Release: 1%{?_distro:.%{_distro}} -License: BSD -Group: Utilities -Packager: Jim Mankovich <jmank@hp.com> -Source: %{name}-%{version}.tar.gz -Buildroot: /var/tmp/ipmitool-root - -%description -This package contains a utility for interfacing with devices that support -the Intelligent Platform Management Interface specification. IPMI is -an open standard for machine health, inventory, and remote power control. - -This utility can communicate with IPMI-enabled devices through either a -kernel driver such as OpenIPMI or over the RMCP LAN protocol defined in -the IPMI specification. IPMIv2 adds support for encrypted LAN -communications and remote Serial-over-LAN functionality. - -It provides commands for reading the Sensor Data Repository (SDR) and -displaying sensor values, displaying the contents of the System Event -Log (SEL), printing Field Replaceable Unit (FRU) information, reading and -setting LAN configuration, and chassis power control. - -%prep -if [ "$RPM_BUILD_ROOT" ] && [ "$RPM_BUILD_ROOT" != "/" ]; then - rm -rf $RPM_BUILD_ROOT -fi - -%setup - -%build -./configure --with-kerneldir \ - --with-rpm-distro= \ - --prefix=%{_prefix} \ - --bindir=%{_bindir} \ - --sbindir=%{_sbindir} \ - --datadir=%{_datadir} \ - --includedir=%{_includedir} \ - --libdir=%{_libdir} \ - --mandir=%{_mandir} \ - --sysconfdir=%{_sysconfdir} -make - -%install -make DESTDIR=$RPM_BUILD_ROOT install-strip - -%clean -if [ "$RPM_BUILD_ROOT" ] && [ "$RPM_BUILD_ROOT" != "/" ]; then - rm -rf $RPM_BUILD_ROOT -fi - -%files -%defattr(755,root,root) -%attr(755,root,root) %{_bindir}/* -%attr(755,root,root) %{_sbindir}/* -%{_datadir}/ipmitool/* -%{_mandir}/man*/* -%doc %{_datadir}/doc/ipmitool - - -%changelog -* Wed Feb 25 2009 <pere@hungry.com> 1.8.11-1 -- Fix new GCC compilation issues in regards to Packing -- Fix Tracker bug #1642710 - ipmi_kcs_drv being loaded/unloaded - for 2.4 kernel instead of ipmi_si_drv driver module -- New -y option added to allow specification of kg keys with - non-printable characters -- New -K option added to allow kgkey settings via environmental - variable IPMI_KGKEY -- Generic device support added for EEPROM with SDR Type 10h (gendev) -- Fix to lan-bridging for a double-bridging crash and to fix - an issue with bridging multiple concurrent requests and - erroneous handling of raw Send Message -- Lanplus fix for commands like 'sensor list' without the -t option - causing wrong double bridged requests of a sensor is located - on another satellite controller -- Fix lan and lanplus request list entry removal bugs -- Fix non-working issue when trying to send a bridge message with - Cipher 3 -- Change bridge message handling to reuse command ipmi_lan_poll_recv -- Added PICMG 2.0 and 2.3 support -- Fix PICMG (ATCA) extension verification and reversal of BCD encoded - values for "major" and "minor" fields -- Add IANA support for Pigeon Point -- Add OEM SW/FW Record identification -- Fix to include I2C and LUN addresses so sensors are correctly managed -- Patch ID 1990560 to get readings from non-linear analog sensors -- Add support for SOL payload status command -- SOL set parameter range checking added -- Fixed SOL activate options usage -- Fixed crashes when parsing 'sol payload' and 'tsol' cmds (#216967) -- Added retries to SOL keepalive -- Fixed wrong mask values for Front Panel disable/enable status -- Add support to access fru internal use area -- Add support for new PICMG 3.0 R3.0 (March 24, 2008) to allow - blocks of data within the FRU storage area to be write protected. -- Fix node reporting in GUID; Tracker bug #2339675 -- Fix watchdog use/action print strings -- Fix endian bug in SDR add from file; Tracker bug #2075258 -- Fix crash when dumping SDRs in a file and there's an error - getting an SDR; improve algorithm for optimal packet size -- Fix occasional SDR dump segfault; #1793076 -- Allow ipmitool sel delete to accept hex list entry numbers -- Fix SEL total space reporting. -- Fix for garbage sensor threshold values reported when none - returned. Tracker Bug #863748 -- ipmievd change to Monitor %used in SEL buffer and log warnings when - the buffer is 80% and 100% full - -* Fri Aug 08 2008 <pere@hungry.com> 1.8.10-1 - - Added support for BULL IANA number. - - Fixed contrib build so the oem_ibm_sel_map file gets included in rpm - builds again. - - Added support for Debian packages to be built from CVS - - Fix for sdr and sel timestamp reporting issues - - Fix for discrete sensor state print routines to address state bits 8-14 - - Change ipmi_chassis_status() to non-static so it can be used externally - - Added retries to SOL keepalive - - Fix to stop sensor list command from reporting a failure due to missing - sensor - - Fix bug in sdr free space reporting - - Add support for IANA number to vendor name conversion for many vendors - - Fix segfault bug in lan set command - - Fix bug in population of raw i2c wdata buffer - - Fix bug in ipmb sensor reading - - Fix misspellings, typos, incorrect strncmp lengths, white space - - Update/fix printed help and usages for many commands - - Add and update support for all commands in ipmitool man page - - Fix for lanplus session re-open when the target becomes unavailable following - a fw upgrade activation - - Add support for watchdog timer shutoff, reset, and get info - - Add support for more ibm systems in oem_ibm_sel_map - - Add more JEDEC support info for DIMMs; decrease request size for DIMM FRU - info to 16 bytes at a time to allow more DIMM FRUs to respond. - - Fix to change hpmfwupg to version 1.02; fix to reduce hpmfwupg buffer - length more aggressively when no response from iol - - Fix HPM firmware activation via IOL; fake a timeout after IOL session - re-open to force get upgrade status retry; Added retries on 0xD3 - completion code - - Add support for freeipmi 0.6.0; adjust autoconf for changes - - Fix for oemval2str size - - Add support for product name resolution in mc info - - Fix FRU display format - - Added PICMG ekeying analyzer module support (ekanalyzer); display point - to point physical connectivity and power supply information between - carriers and AMC modules; display matched results of ekeying match - between an on-carrier device and AMC module or between 2 AMC modules - - Fix AMC GUID display support - - Improved amcportstate operations - - Added resolution for new sensor types - - Fix segfault in SOL - - Fix bug that caused infinite loop on BMCs with empty SDRs - - Fix to move out Kontron OEM sensor resolution for other OEMs which could - lead to bad event descriptions - - Add new FRU edit mode thereby allowing serial numbers, etc. to be changed; - improvements to OEM edit mode - - Added SPD support for parms: channel number, max read size - - Add SDR support for adding SDR records from a dumped file, clearing SDR, - adding partial SDR records - - Add updates and fixes to hpmfwupg: upload block size to 32 bytes for KCS, - handle long response option, implement rollback override, garbage output fix - - Add double bridge lan support , fix bridging issue - - Add HPM support to pre-check which components need to be skipped - - Fix autodetection of maximum packet size when using IPMB - - Add new Kontron OEM command to set the BIOS boot option sequence - - Add support for dual-bridge/ dual send message - - Add auto-detect for local IPMB address using PICMG 2.X extension - - Add support for HPM.1 1.0 specification compliance - - Fix for improper lan/lanplus addressing - - Added transit_channel and transit_addr to ipmi_intf struct - - Fix bad password assertion bug due to rakp2 HMAC not being checked properly - - Added ability to interpret PPS shelf manager clia sel dump - - Corrected PICMG M7 state event definition macros - - Added FRU parsing enhancements - - Added "isol info", "isol set" and "isol activate" commands to support - Intel IPMI v1.5 SOL functionality. Removed "isol setup" command. - - Fix bug in ipmi_lan_recv_packet() in lan and lanplus interfaces. - - Fix bug in "chassis poh" command. - - Fix HPM.1 upgrade to apply to only given component when instructed to do so - - Added configure auto-detection if dual bridge extension is supported - by OpenIPMI - -* Tue Mar 6 2007 <pere@hungry.com> 1.8.9-1 - - Added initial AMC ekey query operation support - - Improvements to ekeying support (PICMG 3.x only) - - Added initial interactive edition support for multirec; added IANA - verification before interpreting PICMG records. - - Added edit support for AMC activation "Maximum Internal Current" - - Fix bug generating garbage on the screen when handling GetDeviceId - and sol traffic occurs - - Added ability to map OEM sensor types to OEM description string using - IANA number; moved IANA number table - - Fix lan set access command to use value already saved within parameters - for PEF and authentication - - Fix bug in cmd ipmitool lan stats get 1 - - Add support to allow ipmitool/ipmievd to target specific device nodes - on multi-BMC systems - - Add support for name+privilege lookup for lanplus sessions - - Fix time_t conversion bug for 64-bit OS - - Added prefix of hostname on sel ipmievd sessions - - Fixed FWUM Get Info - - Fix ipmievd fd closing bug - - Add set-in-progress flag support to chassis bootdev - - Added new chassis bootdev options - - Add sol payload enable/disable comman - - Fix SOL set errors when commit-write not supported - - Fix reset of session timeout for lanplus interface - - Fixed lan interface accessibility timeout handling - - Fix bug with Function Get Channel Cipher Suites command when more - than 1 page used. - - Fix missing firmware firewall top-level command - - Fix bug in SOL keepalive functionality - - Fix SOLv2 NACK and retry handling for Intel ESB2 BMC - - Added ipmi_sel_get_oem_sensor* APIs - - Added HPM.1 support - - Fix segfault when incorrect oem option supplied - - Fix bus problem with spd command - - Fix segfault in SOL when remote BMC does not return packet - - Adjust packet length for AMC.0 retricting IPMB packets to 32 bytes - - Added lan packet size reduction mechanism - - Fix bug with sendMessage of bad length with different target - - Fix for big endian (PPC) architecture - - NetBSD fixes - - Fix segfault and channel problem with user priv command - - Add support for bus/chan on i2c raw command - - Add freeipmi interface support - - Add remote spd printing - - Add better detection of linux/compiler.h to config - - Makefile changes to fix makedistcheck, etc. - -* Tue May 02 2006 <duncan@iceblink.org> 1.8.8-1 - - Fix segfaults in sensor data repository list - - Fix ipmievd to open interface before daemonizing - - Fix IPMIv1.5 authtype NONE to ignore supplied password - - Fix cipher suite display bug in lan print - - Fix typo in IPMIv2 SOL output when sending break - - Fix improper LUN handling with Tyan SOL - - Add LUN support to OpenIPMI interface - - Add support for Kontron OEM commands - - Update to Kontron Firmware Update command - -* Sun Mar 19 2006 <duncan@iceblink.org> 1.8.7-1 - - Add Sun OEM command for blades - - Increase argument size for raw commands in shell/exec - - Fix handling of LUNs for LAN interfaces - - Add IPMIv2 SOL loopback test - - Add support for IBM OEM SEL messages - - Disable file paranoia checks on read files by default - - Support IPMIv2 SOL on older Intel boxes - - Display message and exit if keepalive fails during SOL - - Add support for setting VLAN id and priority - - Add support for FreeBSD OpenIPMI-compatible driver - - Add support for IPMIv2 Firmware Firewall - - Fix gcc4 compile warnings - - Make ipmievd generate pidfile - - Add initscripts for ipmievd - -* Mon Jan 17 2006 <duncan@iceblink.org> 1.8.6-1 - - Fix memory corruption when sending encrypted SOL traffic - - Add keepalive timer to IPMIv2 SOL sessions - -* Sat Jan 14 2006 <duncan@iceblink.org> 1.8.5-1 - - Raise privilege level after creating IPMIv2 session - - Add support for settable SOL escape character with -e option - - Add support for Kg BMC key for IPMIv2 authentication with -k option - - Add support for Tyan IPMIv1.5 SOL with tsol command - - Add support for PICMG devices - - Add support for OEM SEL event parsing - - Add support for command bridging over lan and lanplus interfaces - - New 'chassis selftest' command - - Many bufxies and patches from contributors - -* Wed May 18 2005 <duncan@iceblink.org> 1.8.2-1 - - Fix FRU reading for large (>255 bytes) areas. - - Overhaul to ipmievd to support SEL polling in addition to OpenIPMI. - - Fix LAN parameter segfault when no Ciphers supported by BMC. - - Fix IPMIv2 support on Intel v2 BMCs (use -o intelplus). - - Separate option parsing code from main ipmitool source file. - - Add raw I2C support with IPMI Master Read-Write command. - - Add support for new 'sdr elist' extended output format. - - Add support for listing sensors by type with 'sdr type' command. - - Add support for new 'sel elist' extended output format that - cross-references events with sensors. - - Add support for sending dynamically generated platform events - based on existing sensor information. - - New '-S' argument to read local SDR cache created with 'sdr dump'. - - Updated manpage for ipmitool and ipmievd. - -* Wed Apr 06 2005 <duncan@iceblink.org> 1.8.1-1 - - Install ipmievd into /usr/sbin - -* Wed Mar 16 2005 <duncan@iceblink.org> 1.8.0-1 - - Fix IPMIv2.0 issues - - Fix chassis boot parameter support - - Add support for linear sensors - - Update bmc plugin to work with new Solaris bmc driver (new ioctl - for interface detection and new STREAMS message-based interface) - -* Tue Jan 18 2005 <duncan@iceblink.org> 1.7.0-1 - - Propogate errors correctly so exit status will be useful - - More consistent display of errors including completion code text - - Errors and debug is send to stderr now - - New "sel get" command that will print details about SEL entry - and corresponding SDR records as well as FRUs via entity association - - Improved event generator, now supports reading events from text file - - New "-o oemtype" option for specifying OEM boards - exsting types are "supermicro" and "intelwv2" - - New PEF subsystem from Tim Murphy at Dell - - New "bmc" plugin for Solaris 10 x86 - - Many bugfixes and contributed patches - - Support for Supermicro BMC OEM authentication method - - Fix minor problem with LAN parameter setting - -* Wed Aug 18 2004 <duncan@iceblink.org> 1.6.0-1 - - Add a README - - Add support for IPMIv2 and Serial-over-LAN from Newisys - - Add Solaris x86 lipmi interface - - Add support for building Solaris packages - - Add support for building RPMs as non-root user - - Fix segfault when doing "sel list" (from Matthew Braithwaite) - - Fix "chassis identify" on some BMCs (from ebrower@sourceforge) - - Add "bmc info" and related output (from ebrower@sourceforge) - - new "shell" and "exec" commands - - lots of other contributed patches - -* Sat May 27 2004 <duncan@iceblink.org> 1.5.9-1 - - Add ability to get a particular sensor by name - - Add ability to set a particular sensor threshold - - Add support for displaying V2 channel authentication levels - - Add README for rrdtool scripts in contrib directory - - Improve lan interface retry handling - - Support prompting for password or reading from environment - - Move chaninfo command into channel subcommand - - Fix reservation ID handling when two sessions open to BMC - - Fix reading of large FRU data - - Add configure option for changing binary to ipmiadm for Solaris - - Fix compile problem on Solaris 8 - -* Tue Jan 27 2004 <duncan@iceblink.org> 1.5.8-1 - - Enable static compilation of interfaces - - Fix types to be 64-bit safe - - Fix compilation problems on Solaris - - Fix multiple big-endian problems for Solaris/SPARC - - Fix channel access to save settings to NVRAM - - Set channel privilege limit to ADMIN during "access on" - - Enable gratuitous ARP in bmcautoconf.sh - - Add support for Linux kernel panic messages in SEL output - - Add support for type 3 SDR records - -* Mon Jan 5 2004 <duncan@iceblink.org> 1.5.7-1 - - add IPMIv1.5 eratta fixes - - additions to FRU printing and FRU multirecords - - better handling of SDR printing - - contrib scripts for creating rrdtool graphs - -* Thu Dec 4 2003 <duncan@iceblink.org> 1.5.6-1 - - Fix SEL event decoding for generic events - - Handle empty SEL gracefully when doing "sel list" - - Fix sdr handling of sensors that do not return a reading - - Fix for CSV display of sensor readings/units from Fredrik Öhrn - -* Tue Nov 25 2003 <duncan@iceblink.org> 1.5.5-1 - - Add -U option for setting LAN username - - Fix -v usage for plugin interfaces - -* Fri Nov 14 2003 <duncan@iceblink.org> 1.5.4-1 - - pull interface plugin api into library - - fix ipmievd - -* Fri Oct 31 2003 <duncan@iceblink.org> 1.5.3-1 - - add -g optin for pedantic ipmi-over-lan communication - -* Fri Oct 24 2003 <duncan@iceblink.org> 1.5.2-1 - - add gratuitous arp interval setting - -* Wed Oct 8 2003 <duncan@iceblink.org> 1.5.1-1 - - better SEL support - - fix display bug in SDR list - -* Fri Sep 5 2003 <duncan@iceblink.org> 1.5.0-1 - - use automake/autoconf/libtool - - dynamic loading interface plugins - -* Wed May 28 2003 <duncan@iceblink.org> 1.4.0-1 - - make UDP packet handling more robust - - fix imb driver support - -* Thu May 22 2003 <duncan@iceblink.org> 1.3-1 - - update manpage - - rework of low-level network handling - - add basic imb driver support - -* Wed Apr 2 2003 <duncan@iceblink.org> 1.2-1 - - change command line option parsing - - support for more chassis commands - -* Tue Apr 1 2003 <duncan@iceblink.org> 1.1-1 - - minor fixes. - -* Sun Mar 30 2003 <duncan@iceblink.org> 1.0-1 - - Initial release. - |