summaryrefslogtreecommitdiff
path: root/lib/ipmi_isol.c
diff options
context:
space:
mode:
Diffstat (limited to 'lib/ipmi_isol.c')
-rw-r--r--lib/ipmi_isol.c828
1 files changed, 828 insertions, 0 deletions
diff --git a/lib/ipmi_isol.c b/lib/ipmi_isol.c
new file mode 100644
index 0000000..0338e36
--- /dev/null
+++ b/lib/ipmi_isol.c
@@ -0,0 +1,828 @@
+/*
+ * Copyright (c) 2003 Sun Microsystems, Inc. All Rights Reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * Redistribution of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ *
+ * Redistribution in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * Neither the name of Sun Microsystems, Inc. or the names of
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * This software is provided "AS IS," without a warranty of any kind.
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES,
+ * INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A
+ * PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY EXCLUDED.
+ * SUN MICROSYSTEMS, INC. ("SUN") AND ITS LICENSORS SHALL NOT BE LIABLE
+ * FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING
+ * OR DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES. IN NO EVENT WILL
+ * SUN OR ITS LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA,
+ * OR FOR DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR
+ * PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF
+ * LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE,
+ * EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <stdlib.h>
+#include <string.h>
+#include <strings.h>
+#include <stdio.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <sys/select.h>
+#include <sys/time.h>
+#include <signal.h>
+#include <unistd.h>
+
+
+#include <termios.h>
+
+#include <ipmitool/helper.h>
+#include <ipmitool/log.h>
+#include <ipmitool/ipmi.h>
+#include <ipmitool/ipmi_strings.h>
+#include <ipmitool/ipmi_intf.h>
+#include <ipmitool/ipmi_isol.h>
+
+static struct termios _saved_tio;
+static int _in_raw_mode = 0;
+
+extern int verbose;
+
+#define ISOL_ESCAPE_CHARACTER '~'
+
+/*
+ * ipmi_get_isol_info
+ */
+static int ipmi_get_isol_info(struct ipmi_intf * intf,
+ struct isol_config_parameters * params)
+{
+ struct ipmi_rs * rsp;
+ struct ipmi_rq req;
+ unsigned char data[6];
+
+ memset(&req, 0, sizeof(req));
+ req.msg.netfn = IPMI_NETFN_ISOL;
+ req.msg.cmd = GET_ISOL_CONFIG;
+ req.msg.data = data;
+ req.msg.data_len = 4;
+
+ /* GET ISOL ENABLED CONFIG */
+
+ memset(data, 0, 6);
+ data[0] = 0x00;
+ data[1] = ISOL_ENABLE_PARAM;
+ data[2] = 0x00; /* block */
+ data[3] = 0x00; /* selector */
+
+ rsp = intf->sendrecv(intf, &req);
+ if (rsp == NULL) {
+ lprintf(LOG_ERR, "Error in Get ISOL Config Command");
+ return -1;
+ }
+ if (rsp->ccode == 0xc1) {
+ lprintf(LOG_ERR, "IPMI v1.5 Serial Over Lan (ISOL) not supported!");
+ return -1;
+ }
+ if (rsp->ccode > 0) {
+ lprintf(LOG_ERR, "Error in Get ISOL Config Command: %s",
+ val2str(rsp->ccode, completion_code_vals));
+ return -1;
+ }
+ params->enabled = rsp->data[1];
+
+ /* GET ISOL AUTHENTICATON CONFIG */
+
+ memset(data, 0, 6);
+ data[0] = 0x00;
+ data[1] = ISOL_AUTHENTICATION_PARAM;
+ data[2] = 0x00; /* block */
+ data[3] = 0x00; /* selector */
+
+ rsp = intf->sendrecv(intf, &req);
+ if (rsp == NULL) {
+ lprintf(LOG_ERR, "Error in Get ISOL Config Command");
+ return -1;
+ }
+ if (rsp->ccode > 0) {
+ lprintf(LOG_ERR, "Error in Get ISOL Config Command: %s",
+ val2str(rsp->ccode, completion_code_vals));
+ return -1;
+ }
+ params->privilege_level = rsp->data[1];
+
+ /* GET ISOL BAUD RATE CONFIG */
+
+ memset(data, 0, 6);
+ data[0] = 0x00;
+ data[1] = ISOL_BAUD_RATE_PARAM;
+ data[2] = 0x00; /* block */
+ data[3] = 0x00; /* selector */
+
+ rsp = intf->sendrecv(intf, &req);
+ if (rsp == NULL) {
+ lprintf(LOG_ERR, "Error in Get ISOL Config Command");
+ return -1;
+ }
+ if (rsp->ccode > 0) {
+ lprintf(LOG_ERR, "Error in Get ISOL Config Command: %s",
+ val2str(rsp->ccode, completion_code_vals));
+ return -1;
+ }
+ params->bit_rate = rsp->data[1];
+
+ return 0;
+}
+
+static int ipmi_print_isol_info(struct ipmi_intf * intf)
+{
+ struct isol_config_parameters params = {0};
+ if (ipmi_get_isol_info(intf, &params))
+ return -1;
+
+ if (csv_output)
+ {
+ printf("%s,", (params.enabled & 0x1)?"true": "false");
+ printf("%s,",
+ val2str((params.privilege_level & 0xf), ipmi_privlvl_vals));
+ printf("%s,",
+ val2str((params.bit_rate & 0xf), ipmi_bit_rate_vals));
+ }
+ else
+ {
+ printf("Enabled : %s\n",
+ (params.enabled & 0x1)?"true": "false");
+ printf("Privilege Level : %s\n",
+ val2str((params.privilege_level & 0xf), ipmi_privlvl_vals));
+ printf("Bit Rate (kbps) : %s\n",
+ val2str((params.bit_rate & 0xf), ipmi_bit_rate_vals));
+ }
+
+ return 0;
+}
+
+static int ipmi_isol_set_param(struct ipmi_intf * intf,
+ const char *param,
+ const char *value)
+{
+ struct ipmi_rs * rsp;
+ struct ipmi_rq req;
+ unsigned char data[6];
+ struct isol_config_parameters params = {0};
+
+ /* We need other values to complete the request */
+ if (ipmi_get_isol_info(intf, &params))
+ return -1;
+
+ memset(&req, 0, sizeof(req));
+ req.msg.netfn = IPMI_NETFN_ISOL;
+ req.msg.cmd = SET_ISOL_CONFIG;
+ req.msg.data = data;
+ req.msg.data_len = 3;
+
+ memset(data, 0, 6);
+
+ /*
+ * enabled
+ */
+ if (strcmp(param, "enabled") == 0)
+ {
+ data[1] = ISOL_ENABLE_PARAM;
+ if (strcmp(value, "true") == 0)
+ data[2] = 0x01;
+ else if (strcmp(value, "false") == 0)
+ data[2] = 0x00;
+ else {
+ lprintf(LOG_ERR, "Invalid value %s for parameter %s",
+ value, param);
+ lprintf(LOG_ERR, "Valid values are true and false");
+ return -1;
+ }
+ }
+
+ /*
+ * privilege-level
+ */
+ else if (strcmp(param, "privilege-level") == 0)
+ {
+ data[1] = ISOL_AUTHENTICATION_PARAM;
+ if (! strcmp(value, "user"))
+ data[2] = 0x02;
+ else if (! strcmp(value, "operator"))
+ data[2] = 0x03;
+ else if (! strcmp(value, "admin"))
+ data[2] = 0x04;
+ else if (! strcmp(value, "oem"))
+ data[2] = 0x05;
+ else
+ {
+ lprintf(LOG_ERR, "Invalid value %s for parameter %s",
+ value, param);
+ lprintf(LOG_ERR, "Valid values are user, operator, admin, and oem");
+ return -1;
+ }
+ /* We need to mask bit7 from the fetched value */
+ data[2] |= (params.privilege_level & 0x80) ? 0x80 : 0x00;
+ }
+
+ /*
+ * bit-rate
+ */
+ else if (strcmp(param, "bit-rate") == 0)
+ {
+ data[1] = ISOL_BAUD_RATE_PARAM;
+ if (strncmp(value, "9.6", 3) == 0) {
+ data[2] = 0x06;
+ }
+ else if (strncmp(value, "19.2", 4) == 0) {
+ data[2] = 0x07;
+ }
+ else if (strncmp(value, "38.4", 4) == 0) {
+ data[2] = 0x08;
+ }
+ else if (strncmp(value, "57.6", 4) == 0) {
+ data[2] = 0x09;
+ }
+ else if (strncmp(value, "115.2", 5) == 0) {
+ data[2] = 0x0A;
+ }
+ else {
+ lprintf(LOG_ERR, "ISOL - Unsupported baud rate: %s", value);
+ lprintf(LOG_ERR, "Valid values are 9.6, 19.2, 38.4, 57.6 and 115.2");
+ return -1;
+ }
+ }
+ else
+ {
+ lprintf(LOG_ERR, "Error: invalid ISOL parameter %s", param);
+ return -1;
+ }
+
+
+ /*
+ * Execute the request
+ */
+
+ rsp = intf->sendrecv(intf, &req);
+ if (rsp == NULL) {
+ lprintf(LOG_ERR, "Error setting ISOL parameter '%s'", param);
+ return -1;
+ }
+ if (rsp->ccode > 0) {
+ lprintf(LOG_ERR, "Error setting ISOL parameter '%s': %s",
+ param, val2str(rsp->ccode, completion_code_vals));
+ return -1;
+ }
+
+ return 0;
+}
+
+static void
+leave_raw_mode(void)
+{
+ if (!_in_raw_mode)
+ return;
+ if (tcsetattr(fileno(stdin), TCSADRAIN, &_saved_tio) == -1)
+ perror("tcsetattr");
+ else
+ _in_raw_mode = 0;
+}
+
+
+
+static void
+enter_raw_mode(void)
+{
+ struct termios tio;
+ if (tcgetattr(fileno(stdin), &tio) == -1) {
+ perror("tcgetattr");
+ return;
+ }
+ _saved_tio = tio;
+ tio.c_iflag |= IGNPAR;
+ tio.c_iflag &= ~(ISTRIP | INLCR | IGNCR | ICRNL | IXON | IXANY | IXOFF)\
+ ;
+ tio.c_lflag &= ~(ISIG | ICANON | ECHO | ECHOE | ECHOK | ECHONL);
+ // #ifdef IEXTEN
+ tio.c_lflag &= ~IEXTEN;
+ // #endif
+ tio.c_oflag &= ~OPOST;
+ tio.c_cc[VMIN] = 1;
+ tio.c_cc[VTIME] = 0;
+ if (tcsetattr(fileno(stdin), TCSADRAIN, &tio) == -1)
+ perror("tcsetattr");
+ else
+ _in_raw_mode = 1;
+}
+
+
+static void
+sendBreak(struct ipmi_intf * intf)
+{
+ struct ipmi_v2_payload v2_payload;
+
+ memset(&v2_payload, 0, sizeof(v2_payload));
+
+ v2_payload.payload.sol_packet.character_count = 0;
+ v2_payload.payload.sol_packet.generate_break = 1;
+
+ intf->send_sol(intf, &v2_payload);
+}
+
+/*
+ * suspendSelf
+ *
+ * Put ourself in the background
+ *
+ * param bRestoreTty specifies whether we will put our self back
+ * in raw mode when we resume
+ */
+static void
+suspendSelf(int bRestoreTty)
+{
+ leave_raw_mode();
+ kill(getpid(), SIGTSTP);
+
+ if (bRestoreTty)
+ enter_raw_mode();
+}
+
+
+
+/*
+ * printiSolEscapeSequences
+ *
+ * Send some useful documentation to the user
+ */
+static void
+printiSolEscapeSequences(void)
+{
+ printf(
+ "%c?\n\
+ Supported escape sequences:\n\
+ %c. - terminate connection\n\
+ %c^Z - suspend ipmitool\n\
+ %c^X - suspend ipmitool, but don't restore tty on restart\n\
+ %cB - send break\n\
+ %c? - this message\n\
+ %c%c - send the escape character by typing it twice\n\
+ (Note that escapes are only recognized immediately after newline.)\n",
+ ISOL_ESCAPE_CHARACTER,
+ ISOL_ESCAPE_CHARACTER,
+ ISOL_ESCAPE_CHARACTER,
+ ISOL_ESCAPE_CHARACTER,
+ ISOL_ESCAPE_CHARACTER,
+ ISOL_ESCAPE_CHARACTER,
+ ISOL_ESCAPE_CHARACTER,
+ ISOL_ESCAPE_CHARACTER);
+}
+
+
+
+/*
+ * output
+ *
+ * Send the specified data to stdout
+ */
+static void
+output(struct ipmi_rs * rsp)
+{
+ if (rsp)
+ {
+ int i;
+ for (i = 0; i < rsp->data_len; ++i)
+ putc(rsp->data[i], stdout);
+
+ fflush(stdout);
+ }
+}
+
+/*
+ * ipmi_isol_deactivate
+ */
+static int
+ipmi_isol_deactivate(struct ipmi_intf * intf)
+{
+ struct ipmi_rs * rsp;
+ struct ipmi_rq req;
+ uint8_t data[6];
+ struct isol_config_parameters params;
+
+ memset(&req, 0, sizeof(req));
+ req.msg.netfn = IPMI_NETFN_ISOL;
+ req.msg.cmd = ACTIVATE_ISOL;
+ req.msg.data = data;
+ req.msg.data_len = 5;
+
+ memset(data, 0, 6);
+ data[0] = 0x00; /* Deactivate */
+ data[1] = 0x00;
+ data[2] = 0x00;
+ data[3] = 0x00;
+ data[5] = 0x00;
+
+ rsp = intf->sendrecv(intf, &req);
+ if (rsp == NULL) {
+ lprintf(LOG_ERR, "Error deactivating ISOL");
+ return -1;
+ }
+ if (rsp->ccode > 0) {
+ lprintf(LOG_ERR, "Error deactivating ISOL: %s",
+ val2str(rsp->ccode, completion_code_vals));
+ return -1;
+ }
+ /* response contain 4 additional bytes : 80 00 32 ff
+ Don't know what to use them for yet... */
+ return 0;
+}
+
+/*
+ * processiSolUserInput
+ *
+ * Act on user input into the ISOL session. The only reason this
+ * is complicated is that we have to process escape sequences.
+ *
+ * return 0 on success
+ * 1 if we should exit
+ * < 0 on error (BMC probably closed the session)
+ */
+static int
+processiSolUserInput(struct ipmi_intf * intf,
+ uint8_t * input,
+ uint16_t buffer_length)
+{
+ static int escape_pending = 0;
+ static int last_was_cr = 1;
+ struct ipmi_v2_payload v2_payload;
+ int length = 0;
+ int retval = 0;
+ char ch;
+ int i;
+
+ memset(&v2_payload, 0, sizeof(v2_payload));
+
+ /*
+ * Our first order of business is to check the input for escape
+ * sequences to act on.
+ */
+ for (i = 0; i < buffer_length; ++i)
+ {
+ ch = input[i];
+
+ if (escape_pending){
+ escape_pending = 0;
+
+ /*
+ * Process a possible escape sequence.
+ */
+ switch (ch) {
+ case '.':
+ printf("%c. [terminated ipmitool]\n", ISOL_ESCAPE_CHARACTER);
+ retval = 1;
+ break;
+ case 'Z' - 64:
+ printf("%c^Z [suspend ipmitool]\n", ISOL_ESCAPE_CHARACTER);
+ suspendSelf(1); /* Restore tty back to raw */
+ continue;
+
+ case 'X' - 64:
+ printf("%c^X [suspend ipmitool]\n", ISOL_ESCAPE_CHARACTER);
+ suspendSelf(0); /* Don't restore to raw mode */
+ continue;
+
+ case 'B':
+ printf("%cb [send break]\n", ISOL_ESCAPE_CHARACTER);
+ sendBreak(intf);
+ continue;
+
+ case '?':
+ printiSolEscapeSequences();
+ continue;
+ default:
+ if (ch != ISOL_ESCAPE_CHARACTER)
+ v2_payload.payload.sol_packet.data[length++] =
+ ISOL_ESCAPE_CHARACTER;
+ v2_payload.payload.sol_packet.data[length++] = ch;
+ }
+ }
+
+ else
+ {
+ if (last_was_cr && (ch == ISOL_ESCAPE_CHARACTER)) {
+ escape_pending = 1;
+ continue;
+ }
+
+ v2_payload.payload.sol_packet.data[length++] = ch;
+ }
+
+
+ /*
+ * Normal character. Record whether it was a newline.
+ */
+ last_was_cr = (ch == '\r' || ch == '\n');
+ }
+
+ /*
+ * If there is anything left to process we dispatch it to the BMC,
+ * send intf->session->sol_data.max_outbound_payload_size bytes
+ * at a time.
+ */
+ if (length)
+ {
+ struct ipmi_rs * rsp;
+
+ v2_payload.payload.sol_packet.flush_outbound = 1; /* Not sure if necessary ? */
+ v2_payload.payload.sol_packet.character_count = length;
+ rsp = intf->send_sol(intf, &v2_payload);
+
+ if (! rsp) {
+ lprintf(LOG_ERR, "Error sending SOL data");
+ retval = -1;
+ }
+
+ /* If the sequence number is set we know we have new data */
+ else if ((rsp->session.payloadtype == IPMI_PAYLOAD_TYPE_SOL) &&
+ (rsp->payload.sol_packet.packet_sequence_number))
+ output(rsp);
+ }
+ return retval;
+}
+
+/*
+ * ipmi_isol_red_pill
+ */
+static int
+ipmi_isol_red_pill(struct ipmi_intf * intf)
+{
+ char * buffer;
+ int numRead;
+ int bShouldExit = 0;
+ int bBmcClosedSession = 0;
+ fd_set read_fds;
+ struct timeval tv;
+ int retval;
+ int buffer_size = 255;
+ int timedout = 0;
+
+ buffer = (char*)malloc(buffer_size);
+ if (buffer == NULL) {
+ lprintf(LOG_ERR, "ipmitool: malloc failure");
+ return -1;
+ }
+
+ enter_raw_mode();
+
+ while (! bShouldExit)
+ {
+ FD_ZERO(&read_fds);
+ FD_SET(0, &read_fds);
+ FD_SET(intf->fd, &read_fds);
+
+ /* Wait up to half a second */
+ tv.tv_sec = 0;
+ tv.tv_usec = 500000;
+
+ retval = select(intf->fd + 1, &read_fds, NULL, NULL, &tv);
+
+ if (retval)
+ {
+ if (retval == -1)
+ {
+ /* ERROR */
+ perror("select");
+ return -1;
+ }
+
+ timedout = 0;
+
+ /*
+ * Process input from the user
+ */
+ if (FD_ISSET(0, &read_fds))
+ {
+ memset(buffer, 0, buffer_size);
+ numRead = read(fileno(stdin),
+ buffer,
+ buffer_size);
+
+ if (numRead > 0)
+ {
+ int rc = processiSolUserInput(intf, buffer, numRead);
+
+ if (rc)
+ {
+ if (rc < 0)
+ bShouldExit = bBmcClosedSession = 1;
+ else
+ bShouldExit = 1;
+ }
+ }
+ else
+ {
+ bShouldExit = 1;
+ }
+ }
+
+
+ /*
+ * Process input from the BMC
+ */
+ else if (FD_ISSET(intf->fd, &read_fds))
+ {
+ struct ipmi_rs * rs = intf->recv_sol(intf);
+ if (! rs)
+ {
+ bShouldExit = bBmcClosedSession = 1;
+ }
+ else
+ output(rs);
+ }
+
+
+ /*
+ * ERROR in select
+ */
+ else
+ {
+ lprintf(LOG_ERR, "Error: Select returned with nothing to read");
+ bShouldExit = 1;
+ }
+ }
+ else
+ {
+ if ((++timedout) == 20) /* Every 10 seconds we send a keepalive */
+ {
+ intf->keepalive(intf);
+ timedout = 0;
+ }
+ }
+ }
+
+ leave_raw_mode();
+
+ if (bBmcClosedSession)
+ {
+ lprintf(LOG_ERR, "SOL session closed by BMC");
+ }
+ else
+ ipmi_isol_deactivate(intf);
+
+ return 0;
+}
+
+/*
+ * ipmi_isol_activate
+ */
+static int
+ipmi_isol_activate(struct ipmi_intf * intf)
+{
+ struct ipmi_rs * rsp;
+ struct ipmi_rq req;
+ uint8_t data[6];
+ struct isol_config_parameters params;
+
+ if (ipmi_get_isol_info(intf, &params))
+ return -1;
+
+ if (!(params.enabled & 0x1)) {
+ lprintf(LOG_ERR, "ISOL is not enabled!");
+ return -1;
+ }
+
+ /*
+ * Setup a callback so that the lanplus processing knows what
+ * to do with packets that come unexpectedly (while waiting for
+ * an ACK, perhaps.
+ */
+ intf->session->sol_data.sol_input_handler = output;
+
+ memset(&req, 0, sizeof(req));
+ req.msg.netfn = IPMI_NETFN_ISOL;
+ req.msg.cmd = ACTIVATE_ISOL;
+ req.msg.data = data;
+ req.msg.data_len = 5;
+
+ memset(data, 0, 6);
+ data[0] = 0x01;
+ data[1] = 0x00;
+ data[2] = 0x00;
+ data[3] = 0x00;
+ data[5] = 0x00;
+
+ rsp = intf->sendrecv(intf, &req);
+ if (NULL != rsp) {
+ switch (rsp->ccode) {
+ case 0x00:
+ if (rsp->data_len == 4) {
+ break;
+ } else {
+ lprintf(LOG_ERR, "Error: Unexpected data length (%d) received "
+ "in ISOL activation response",
+ rsp->data_len);
+ return -1;
+ }
+ break;
+ case 0x80:
+ lprintf(LOG_ERR, "Info: ISOL already active on another session");
+ return -1;
+ case 0x81:
+ lprintf(LOG_ERR, "Info: ISOL disabled");
+ return -1;
+ case 0x82:
+ lprintf(LOG_ERR, "Info: ISOL activation limit reached");
+ return -1;
+ default:
+ lprintf(LOG_ERR, "Error activating ISOL: %s",
+ val2str(rsp->ccode, completion_code_vals));
+ return -1;
+ }
+ } else {
+ lprintf(LOG_ERR, "Error: No response activating ISOL");
+ return -1;
+ }
+
+ /* response contain 4 additional bytes : 80 01 32 ff
+ Don't know what to use them for yet... */
+
+ printf("[SOL Session operational. Use %c? for help]\n",
+ ISOL_ESCAPE_CHARACTER);
+
+ /*
+ * At this point we are good to go with our SOL session. We
+ * need to listen to
+ * 1) STDIN for user input
+ * 2) The FD for incoming SOL packets
+ */
+ if (ipmi_isol_red_pill(intf)) {
+ lprintf(LOG_ERR, "Error in SOL session");
+ return -1;
+ }
+
+ return 0;
+}
+
+static void print_isol_set_usage(void) {
+ lprintf(LOG_NOTICE, "\nISOL set parameters and values: \n");
+ lprintf(LOG_NOTICE, " enabled true | false");
+ lprintf(LOG_NOTICE, " privilege-level user | operator | admin | oem");
+ lprintf(LOG_NOTICE, " bit-rate "
+ "9.6 | 19.2 | 38.4 | 57.6 | 115.2");
+ lprintf(LOG_NOTICE, "");
+}
+
+static void print_isol_usage(void) {
+ lprintf(LOG_NOTICE, "ISOL Commands: info");
+ lprintf(LOG_NOTICE, " set <parameter> <setting>");
+ lprintf(LOG_NOTICE, " activate");
+}
+
+int ipmi_isol_main(struct ipmi_intf * intf, int argc, char ** argv)
+{
+ int ret = 0;
+
+ /*
+ * Help
+ */
+ if (!argc || !strncmp(argv[0], "help", 4))
+ print_isol_usage();
+
+ /*
+ * Info
+ */
+ else if (!strncmp(argv[0], "info", 4)) {
+ ret = ipmi_print_isol_info(intf);
+ }
+
+ /*
+ * Set a parameter value
+ */
+ else if (!strncmp(argv[0], "set", 3)) {
+ if (argc < 3) {
+ print_isol_set_usage();
+ return -1;
+ }
+ ret = ipmi_isol_set_param(intf, argv[1], argv[2]);
+ }
+
+ /*
+ * Activate
+ */
+ else if (!strncmp(argv[0], "activate", 8)) {
+ ret = ipmi_isol_activate(intf);
+ }
+
+ else {
+ print_isol_usage();
+ ret = -1;
+ }
+
+ return ret;
+}
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-15 14:21:53 +0000