diff options
Diffstat (limited to 'src/plugins')
48 files changed, 1190 insertions, 8055 deletions
diff --git a/src/plugins/Makefile.am b/src/plugins/Makefile.am index 7ad8173..14acbcf 100644 --- a/src/plugins/Makefile.am +++ b/src/plugins/Makefile.am @@ -32,11 +32,12 @@ MAINTAINERCLEANFILES = Makefile.in AM_CPPFLAGS = -I$(top_srcdir)/include -SUBDIRS = @INTF_LAN@ @INTF_LANPLUS@ @INTF_OPEN@ @INTF_LIPMI@ @INTF_IMB@ @INTF_BMC@ @INTF_FREE@ @INTF_SERIAL@ @INTF_DUMMY@ @INTF_USB@ -DIST_SUBDIRS = lan lanplus open lipmi imb bmc free serial dummy usb +SUBDIRS = @INTF_LAN@ @INTF_LANPLUS@ @INTF_OPEN@ @INTF_LIPMI@ @INTF_IMB@ @INTF_BMC@ @INTF_FREE@ @INTF_SERIAL@ @INTF_DUMMY@ @INTF_USB@ @INTF_DBUS@ +DIST_SUBDIRS = lan lanplus open lipmi imb bmc free serial dummy usb dbus noinst_LTLIBRARIES = libintf.la libintf_la_SOURCES = ipmi_intf.c +libintf_la_CFLAGS = -DDEFAULT_INTF='"@DEFAULT_INTF@"' libintf_la_LDFLAGS = -export-dynamic libintf_la_LIBADD = @IPMITOOL_INTF_LIB@ libintf_la_DEPENDENCIES = @IPMITOOL_INTF_LIB@ diff --git a/src/plugins/Makefile.in b/src/plugins/Makefile.in deleted file mode 100644 index 262ff90..0000000 --- a/src/plugins/Makefile.in +++ /dev/null @@ -1,757 +0,0 @@ -# Makefile.in generated by automake 1.14.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994-2013 Free Software Foundation, Inc. - -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -# Copyright (c) 2003 Sun Microsystems, Inc. All Rights Reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# Redistribution of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# -# Redistribution in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in the -# documentation and/or other materials provided with the distribution. -# -# Neither the name of Sun Microsystems, Inc. or the names of -# contributors may be used to endorse or promote products derived -# from this software without specific prior written permission. -# -# This software is provided "AS IS," without a warranty of any kind. -# ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, -# INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A -# PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY EXCLUDED. -# SUN MICROSYSTEMS, INC. ("SUN") AND ITS LICENSORS SHALL NOT BE LIABLE -# FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING -# OR DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES. IN NO EVENT WILL -# SUN OR ITS LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA, -# OR FOR DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR -# PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF -# LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE, -# EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. - -VPATH = @srcdir@ -am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' -am__make_running_with_option = \ - case $${target_option-} in \ - ?) ;; \ - *) echo "am__make_running_with_option: internal error: invalid" \ - "target option '$${target_option-}' specified" >&2; \ - exit 1;; \ - esac; \ - has_opt=no; \ - sane_makeflags=$$MAKEFLAGS; \ - if $(am__is_gnu_make); then \ - sane_makeflags=$$MFLAGS; \ - else \ - case $$MAKEFLAGS in \ - *\\[\ \ ]*) \ - bs=\\; \ - sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ - | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ - esac; \ - fi; \ - skip_next=no; \ - strip_trailopt () \ - { \ - flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ - }; \ - for flg in $$sane_makeflags; do \ - test $$skip_next = yes && { skip_next=no; continue; }; \ - case $$flg in \ - *=*|--*) continue;; \ - -*I) strip_trailopt 'I'; skip_next=yes;; \ - -*I?*) strip_trailopt 'I';; \ - -*O) strip_trailopt 'O'; skip_next=yes;; \ - -*O?*) strip_trailopt 'O';; \ - -*l) strip_trailopt 'l'; skip_next=yes;; \ - -*l?*) strip_trailopt 'l';; \ - -[dEDm]) skip_next=yes;; \ - -[JT]) skip_next=yes;; \ - esac; \ - case $$flg in \ - *$$target_option*) has_opt=yes; break;; \ - esac; \ - done; \ - test $$has_opt = yes -am__make_dryrun = (target_option=n; $(am__make_running_with_option)) -am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -target_triplet = @target@ -subdir = src/plugins -DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ - $(top_srcdir)/depcomp -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(install_sh) -d -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -LTLIBRARIES = $(noinst_LTLIBRARIES) -am_libintf_la_OBJECTS = ipmi_intf.lo -libintf_la_OBJECTS = $(am_libintf_la_OBJECTS) -AM_V_lt = $(am__v_lt_@AM_V@) -am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@) -am__v_lt_0 = --silent -am__v_lt_1 = -libintf_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ - $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ - $(libintf_la_LDFLAGS) $(LDFLAGS) -o $@ -AM_V_P = $(am__v_P_@AM_V@) -am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) -am__v_P_0 = false -am__v_P_1 = : -AM_V_GEN = $(am__v_GEN_@AM_V@) -am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) -am__v_GEN_0 = @echo " GEN " $@; -am__v_GEN_1 = -AM_V_at = $(am__v_at_@AM_V@) -am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) -am__v_at_0 = @ -am__v_at_1 = -DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) -depcomp = $(SHELL) $(top_srcdir)/depcomp -am__depfiles_maybe = depfiles -am__mv = mv -f -COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ - $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ - $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \ - $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ - $(AM_CFLAGS) $(CFLAGS) -AM_V_CC = $(am__v_CC_@AM_V@) -am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@) -am__v_CC_0 = @echo " CC " $@; -am__v_CC_1 = -CCLD = $(CC) -LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ - $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ - $(AM_LDFLAGS) $(LDFLAGS) -o $@ -AM_V_CCLD = $(am__v_CCLD_@AM_V@) -am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@) -am__v_CCLD_0 = @echo " CCLD " $@; -am__v_CCLD_1 = -SOURCES = $(libintf_la_SOURCES) -DIST_SOURCES = $(libintf_la_SOURCES) -RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ - ctags-recursive dvi-recursive html-recursive info-recursive \ - install-data-recursive install-dvi-recursive \ - install-exec-recursive install-html-recursive \ - install-info-recursive install-pdf-recursive \ - install-ps-recursive install-recursive installcheck-recursive \ - installdirs-recursive pdf-recursive ps-recursive \ - tags-recursive uninstall-recursive -am__can_run_installinfo = \ - case $$AM_UPDATE_INFO_DIR in \ - n|no|NO) false;; \ - *) (install-info --version) >/dev/null 2>&1;; \ - esac -RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ - distclean-recursive maintainer-clean-recursive -am__recursive_targets = \ - $(RECURSIVE_TARGETS) \ - $(RECURSIVE_CLEAN_TARGETS) \ - $(am__extra_recursive_targets) -AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ - distdir -am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) -# Read a list of newline-separated strings from the standard input, -# and print each of them once, without duplicates. Input order is -# *not* preserved. -am__uniquify_input = $(AWK) '\ - BEGIN { nonempty = 0; } \ - { items[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in items) print i; }; } \ -' -# Make sure the list of sources is unique. This is necessary because, -# e.g., the same source file might be shared among _SOURCES variables -# for different programs/libraries. -am__define_uniq_tagged_files = \ - list='$(am__tagged_files)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | $(am__uniquify_input)` -ETAGS = etags -CTAGS = ctags -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -am__relativize = \ - dir0=`pwd`; \ - sed_first='s,^\([^/]*\)/.*$$,\1,'; \ - sed_rest='s,^[^/]*/*,,'; \ - sed_last='s,^.*/\([^/]*\)$$,\1,'; \ - sed_butlast='s,/*[^/]*$$,,'; \ - while test -n "$$dir1"; do \ - first=`echo "$$dir1" | sed -e "$$sed_first"`; \ - if test "$$first" != "."; then \ - if test "$$first" = ".."; then \ - dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ - dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ - else \ - first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ - if test "$$first2" = "$$first"; then \ - dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ - else \ - dir2="../$$dir2"; \ - fi; \ - dir0="$$dir0"/"$$first"; \ - fi; \ - fi; \ - dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ - done; \ - reldir="$$dir2" -ACLOCAL = @ACLOCAL@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -ARCH = @ARCH@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BASEDIR = @BASEDIR@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DISTRO = @DISTRO@ -DLLTOOL = @DLLTOOL@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FGREP = @FGREP@ -GREP = @GREP@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INTF_BMC = @INTF_BMC@ -INTF_BMC_LIB = @INTF_BMC_LIB@ -INTF_DUMMY = @INTF_DUMMY@ -INTF_DUMMY_LIB = @INTF_DUMMY_LIB@ -INTF_FREE = @INTF_FREE@ -INTF_FREE_LIB = @INTF_FREE_LIB@ -INTF_IMB = @INTF_IMB@ -INTF_IMB_LIB = @INTF_IMB_LIB@ -INTF_LAN = @INTF_LAN@ -INTF_LANPLUS = @INTF_LANPLUS@ -INTF_LANPLUS_LIB = @INTF_LANPLUS_LIB@ -INTF_LAN_LIB = @INTF_LAN_LIB@ -INTF_LIPMI = @INTF_LIPMI@ -INTF_LIPMI_LIB = @INTF_LIPMI_LIB@ -INTF_OPEN = @INTF_OPEN@ -INTF_OPEN_LIB = @INTF_OPEN_LIB@ -INTF_SERIAL = @INTF_SERIAL@ -INTF_SERIAL_LIB = @INTF_SERIAL_LIB@ -INTF_USB = @INTF_USB@ -INTF_USB_LIB = @INTF_USB_LIB@ -IPMITOOL_INTF_LIB = @IPMITOOL_INTF_LIB@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ -MKDIR_P = @MKDIR_P@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OS = @OS@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -POW_LIB = @POW_LIB@ -PSTAMP = @PSTAMP@ -RANLIB = @RANLIB@ -RPMBUILD = @RPMBUILD@ -RPM_RELEASE = @RPM_RELEASE@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -VERSION = @VERSION@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_configure_args = @ac_configure_args@ -ac_ct_AR = @ac_ct_AR@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target = @target@ -target_alias = @target_alias@ -target_cpu = @target_cpu@ -target_os = @target_os@ -target_vendor = @target_vendor@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -MAINTAINERCLEANFILES = Makefile.in -AM_CPPFLAGS = -I$(top_srcdir)/include -SUBDIRS = @INTF_LAN@ @INTF_LANPLUS@ @INTF_OPEN@ @INTF_LIPMI@ @INTF_IMB@ @INTF_BMC@ @INTF_FREE@ @INTF_SERIAL@ @INTF_DUMMY@ @INTF_USB@ -DIST_SUBDIRS = lan lanplus open lipmi imb bmc free serial dummy usb -noinst_LTLIBRARIES = libintf.la -libintf_la_SOURCES = ipmi_intf.c -libintf_la_LDFLAGS = -export-dynamic -libintf_la_LIBADD = @IPMITOOL_INTF_LIB@ -libintf_la_DEPENDENCIES = @IPMITOOL_INTF_LIB@ -all: all-recursive - -.SUFFIXES: -.SUFFIXES: .c .lo .o .obj -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/plugins/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign src/plugins/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): - -clean-noinstLTLIBRARIES: - -test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES) - @list='$(noinst_LTLIBRARIES)'; \ - locs=`for p in $$list; do echo $$p; done | \ - sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \ - sort -u`; \ - test -z "$$locs" || { \ - echo rm -f $${locs}; \ - rm -f $${locs}; \ - } - -libintf.la: $(libintf_la_OBJECTS) $(libintf_la_DEPENDENCIES) $(EXTRA_libintf_la_DEPENDENCIES) - $(AM_V_CCLD)$(libintf_la_LINK) $(libintf_la_OBJECTS) $(libintf_la_LIBADD) $(LIBS) - -mostlyclean-compile: - -rm -f *.$(OBJEXT) - -distclean-compile: - -rm -f *.tab.c - -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ipmi_intf.Plo@am__quote@ - -.c.o: -@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $< - -.c.obj: -@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'` - -.c.lo: -@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $< - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs - -# This directory's subdirectories are mostly independent; you can cd -# into them and run 'make' without going through this Makefile. -# To change the values of 'make' variables: instead of editing Makefiles, -# (1) if the variable is set in 'config.status', edit 'config.status' -# (which will cause the Makefiles to be regenerated when you run 'make'); -# (2) otherwise, pass the desired values on the 'make' command line. -$(am__recursive_targets): - @fail=; \ - if $(am__make_keepgoing); then \ - failcom='fail=yes'; \ - else \ - failcom='exit 1'; \ - fi; \ - dot_seen=no; \ - target=`echo $@ | sed s/-recursive//`; \ - case "$@" in \ - distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ - *) list='$(SUBDIRS)' ;; \ - esac; \ - for subdir in $$list; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - dot_seen=yes; \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || eval $$failcom; \ - done; \ - if test "$$dot_seen" = "no"; then \ - $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ - fi; test -z "$$fail" - -ID: $(am__tagged_files) - $(am__define_uniq_tagged_files); mkid -fID $$unique -tags: tags-recursive -TAGS: tags - -tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) - set x; \ - here=`pwd`; \ - if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ - include_option=--etags-include; \ - empty_fix=.; \ - else \ - include_option=--include; \ - empty_fix=; \ - fi; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - test ! -f $$subdir/TAGS || \ - set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ - fi; \ - done; \ - $(am__define_uniq_tagged_files); \ - shift; \ - if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - if test $$# -gt 0; then \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - "$$@" $$unique; \ - else \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$unique; \ - fi; \ - fi -ctags: ctags-recursive - -CTAGS: ctags -ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) - $(am__define_uniq_tagged_files); \ - test -z "$(CTAGS_ARGS)$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && $(am__cd) $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) "$$here" -cscopelist: cscopelist-recursive - -cscopelist-am: $(am__tagged_files) - list='$(am__tagged_files)'; \ - case "$(srcdir)" in \ - [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ - *) sdir=$(subdir)/$(srcdir) ;; \ - esac; \ - for i in $$list; do \ - if test -f "$$i"; then \ - echo "$(subdir)/$$i"; \ - else \ - echo "$$sdir/$$i"; \ - fi; \ - done >> $(top_builddir)/cscope.files - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done - @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - $(am__make_dryrun) \ - || test -d "$(distdir)/$$subdir" \ - || $(MKDIR_P) "$(distdir)/$$subdir" \ - || exit 1; \ - dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ - $(am__relativize); \ - new_distdir=$$reldir; \ - dir1=$$subdir; dir2="$(top_distdir)"; \ - $(am__relativize); \ - new_top_distdir=$$reldir; \ - echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ - echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ - ($(am__cd) $$subdir && \ - $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="$$new_top_distdir" \ - distdir="$$new_distdir" \ - am__remove_distdir=: \ - am__skip_length_check=: \ - am__skip_mode_fix=: \ - distdir) \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-recursive -all-am: Makefile $(LTLIBRARIES) -installdirs: installdirs-recursive -installdirs-am: -install: install-recursive -install-exec: install-exec-recursive -install-data: install-data-recursive -uninstall: uninstall-recursive - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-recursive -install-strip: - if test -z '$(STRIP)'; then \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - install; \ - else \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ - fi -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." - -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) -clean: clean-recursive - -clean-am: clean-generic clean-libtool clean-noinstLTLIBRARIES \ - mostlyclean-am - -distclean: distclean-recursive - -rm -rf ./$(DEPDIR) - -rm -f Makefile -distclean-am: clean-am distclean-compile distclean-generic \ - distclean-tags - -dvi: dvi-recursive - -dvi-am: - -html: html-recursive - -html-am: - -info: info-recursive - -info-am: - -install-data-am: - -install-dvi: install-dvi-recursive - -install-dvi-am: - -install-exec-am: - -install-html: install-html-recursive - -install-html-am: - -install-info: install-info-recursive - -install-info-am: - -install-man: - -install-pdf: install-pdf-recursive - -install-pdf-am: - -install-ps: install-ps-recursive - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-recursive - -rm -rf ./$(DEPDIR) - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-recursive - -mostlyclean-am: mostlyclean-compile mostlyclean-generic \ - mostlyclean-libtool - -pdf: pdf-recursive - -pdf-am: - -ps: ps-recursive - -ps-am: - -uninstall-am: - -.MAKE: $(am__recursive_targets) install-am install-strip - -.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \ - check-am clean clean-generic clean-libtool \ - clean-noinstLTLIBRARIES cscopelist-am ctags ctags-am distclean \ - distclean-compile distclean-generic distclean-libtool \ - distclean-tags distdir dvi dvi-am html html-am info info-am \ - install install-am install-data install-data-am install-dvi \ - install-dvi-am install-exec install-exec-am install-html \ - install-html-am install-info install-info-am install-man \ - install-pdf install-pdf-am install-ps install-ps-am \ - install-strip installcheck installcheck-am installdirs \ - installdirs-am maintainer-clean maintainer-clean-generic \ - mostlyclean mostlyclean-compile mostlyclean-generic \ - mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \ - uninstall-am - - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/src/plugins/bmc/Makefile.in b/src/plugins/bmc/Makefile.in deleted file mode 100644 index 3cb831b..0000000 --- a/src/plugins/bmc/Makefile.in +++ /dev/null @@ -1,640 +0,0 @@ -# Makefile.in generated by automake 1.14.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994-2013 Free Software Foundation, Inc. - -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -# Copyright (c) 2004 Sun Microsystems, Inc. All Rights Reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# Redistribution of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# -# Redistribution in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in the -# documentation and/or other materials provided with the distribution. -# -# Neither the name of Sun Microsystems, Inc. or the names of -# contributors may be used to endorse or promote products derived -# from this software without specific prior written permission. -# -# This software is provided "AS IS," without a warranty of any kind. -# ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, -# INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A -# PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY EXCLUDED. -# SUN MICROSYSTEMS, INC. ("SUN") AND ITS LICENSORS SHALL NOT BE LIABLE -# FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING -# OR DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES. IN NO EVENT WILL -# SUN OR ITS LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA, -# OR FOR DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR -# PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF -# LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE, -# EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. - -VPATH = @srcdir@ -am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' -am__make_running_with_option = \ - case $${target_option-} in \ - ?) ;; \ - *) echo "am__make_running_with_option: internal error: invalid" \ - "target option '$${target_option-}' specified" >&2; \ - exit 1;; \ - esac; \ - has_opt=no; \ - sane_makeflags=$$MAKEFLAGS; \ - if $(am__is_gnu_make); then \ - sane_makeflags=$$MFLAGS; \ - else \ - case $$MAKEFLAGS in \ - *\\[\ \ ]*) \ - bs=\\; \ - sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ - | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ - esac; \ - fi; \ - skip_next=no; \ - strip_trailopt () \ - { \ - flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ - }; \ - for flg in $$sane_makeflags; do \ - test $$skip_next = yes && { skip_next=no; continue; }; \ - case $$flg in \ - *=*|--*) continue;; \ - -*I) strip_trailopt 'I'; skip_next=yes;; \ - -*I?*) strip_trailopt 'I';; \ - -*O) strip_trailopt 'O'; skip_next=yes;; \ - -*O?*) strip_trailopt 'O';; \ - -*l) strip_trailopt 'l'; skip_next=yes;; \ - -*l?*) strip_trailopt 'l';; \ - -[dEDm]) skip_next=yes;; \ - -[JT]) skip_next=yes;; \ - esac; \ - case $$flg in \ - *$$target_option*) has_opt=yes; break;; \ - esac; \ - done; \ - test $$has_opt = yes -am__make_dryrun = (target_option=n; $(am__make_running_with_option)) -am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -target_triplet = @target@ -subdir = src/plugins/bmc -DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ - $(top_srcdir)/depcomp -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(install_sh) -d -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -LTLIBRARIES = $(noinst_LTLIBRARIES) -libintf_bmc_la_DEPENDENCIES = $(top_builddir)/lib/libipmitool.la -am_libintf_bmc_la_OBJECTS = bmc.lo -libintf_bmc_la_OBJECTS = $(am_libintf_bmc_la_OBJECTS) -AM_V_lt = $(am__v_lt_@AM_V@) -am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@) -am__v_lt_0 = --silent -am__v_lt_1 = -AM_V_P = $(am__v_P_@AM_V@) -am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) -am__v_P_0 = false -am__v_P_1 = : -AM_V_GEN = $(am__v_GEN_@AM_V@) -am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) -am__v_GEN_0 = @echo " GEN " $@; -am__v_GEN_1 = -AM_V_at = $(am__v_at_@AM_V@) -am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) -am__v_at_0 = @ -am__v_at_1 = -DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) -depcomp = $(SHELL) $(top_srcdir)/depcomp -am__depfiles_maybe = depfiles -am__mv = mv -f -COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ - $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ - $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \ - $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ - $(AM_CFLAGS) $(CFLAGS) -AM_V_CC = $(am__v_CC_@AM_V@) -am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@) -am__v_CC_0 = @echo " CC " $@; -am__v_CC_1 = -CCLD = $(CC) -LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ - $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ - $(AM_LDFLAGS) $(LDFLAGS) -o $@ -AM_V_CCLD = $(am__v_CCLD_@AM_V@) -am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@) -am__v_CCLD_0 = @echo " CCLD " $@; -am__v_CCLD_1 = -SOURCES = $(libintf_bmc_la_SOURCES) -DIST_SOURCES = $(libintf_bmc_la_SOURCES) -am__can_run_installinfo = \ - case $$AM_UPDATE_INFO_DIR in \ - n|no|NO) false;; \ - *) (install-info --version) >/dev/null 2>&1;; \ - esac -am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) -# Read a list of newline-separated strings from the standard input, -# and print each of them once, without duplicates. Input order is -# *not* preserved. -am__uniquify_input = $(AWK) '\ - BEGIN { nonempty = 0; } \ - { items[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in items) print i; }; } \ -' -# Make sure the list of sources is unique. This is necessary because, -# e.g., the same source file might be shared among _SOURCES variables -# for different programs/libraries. -am__define_uniq_tagged_files = \ - list='$(am__tagged_files)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | $(am__uniquify_input)` -ETAGS = etags -CTAGS = ctags -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -ARCH = @ARCH@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BASEDIR = @BASEDIR@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DISTRO = @DISTRO@ -DLLTOOL = @DLLTOOL@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FGREP = @FGREP@ -GREP = @GREP@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INTF_BMC = @INTF_BMC@ -INTF_BMC_LIB = @INTF_BMC_LIB@ -INTF_DUMMY = @INTF_DUMMY@ -INTF_DUMMY_LIB = @INTF_DUMMY_LIB@ -INTF_FREE = @INTF_FREE@ -INTF_FREE_LIB = @INTF_FREE_LIB@ -INTF_IMB = @INTF_IMB@ -INTF_IMB_LIB = @INTF_IMB_LIB@ -INTF_LAN = @INTF_LAN@ -INTF_LANPLUS = @INTF_LANPLUS@ -INTF_LANPLUS_LIB = @INTF_LANPLUS_LIB@ -INTF_LAN_LIB = @INTF_LAN_LIB@ -INTF_LIPMI = @INTF_LIPMI@ -INTF_LIPMI_LIB = @INTF_LIPMI_LIB@ -INTF_OPEN = @INTF_OPEN@ -INTF_OPEN_LIB = @INTF_OPEN_LIB@ -INTF_SERIAL = @INTF_SERIAL@ -INTF_SERIAL_LIB = @INTF_SERIAL_LIB@ -INTF_USB = @INTF_USB@ -INTF_USB_LIB = @INTF_USB_LIB@ -IPMITOOL_INTF_LIB = @IPMITOOL_INTF_LIB@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ -MKDIR_P = @MKDIR_P@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OS = @OS@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -POW_LIB = @POW_LIB@ -PSTAMP = @PSTAMP@ -RANLIB = @RANLIB@ -RPMBUILD = @RPMBUILD@ -RPM_RELEASE = @RPM_RELEASE@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -VERSION = @VERSION@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_configure_args = @ac_configure_args@ -ac_ct_AR = @ac_ct_AR@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target = @target@ -target_alias = @target_alias@ -target_cpu = @target_cpu@ -target_os = @target_os@ -target_vendor = @target_vendor@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -MAINTAINERCLEANFILES = Makefile.in -AM_CPPFLAGS = -I$(top_srcdir)/include -EXTRA_LTLIBRARIES = libintf_bmc.la -noinst_LTLIBRARIES = @INTF_BMC_LIB@ -libintf_bmc_la_LIBADD = $(top_builddir)/lib/libipmitool.la -libintf_bmc_la_SOURCES = \ - bmc.c bmc.h \ - bmc_intf.h - -all: all-am - -.SUFFIXES: -.SUFFIXES: .c .lo .o .obj -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/plugins/bmc/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign src/plugins/bmc/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): - -clean-noinstLTLIBRARIES: - -test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES) - @list='$(noinst_LTLIBRARIES)'; \ - locs=`for p in $$list; do echo $$p; done | \ - sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \ - sort -u`; \ - test -z "$$locs" || { \ - echo rm -f $${locs}; \ - rm -f $${locs}; \ - } - -libintf_bmc.la: $(libintf_bmc_la_OBJECTS) $(libintf_bmc_la_DEPENDENCIES) $(EXTRA_libintf_bmc_la_DEPENDENCIES) - $(AM_V_CCLD)$(LINK) $(libintf_bmc_la_OBJECTS) $(libintf_bmc_la_LIBADD) $(LIBS) - -mostlyclean-compile: - -rm -f *.$(OBJEXT) - -distclean-compile: - -rm -f *.tab.c - -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/bmc.Plo@am__quote@ - -.c.o: -@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $< - -.c.obj: -@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'` - -.c.lo: -@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $< - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs - -ID: $(am__tagged_files) - $(am__define_uniq_tagged_files); mkid -fID $$unique -tags: tags-am -TAGS: tags - -tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) - set x; \ - here=`pwd`; \ - $(am__define_uniq_tagged_files); \ - shift; \ - if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - if test $$# -gt 0; then \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - "$$@" $$unique; \ - else \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$unique; \ - fi; \ - fi -ctags: ctags-am - -CTAGS: ctags -ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) - $(am__define_uniq_tagged_files); \ - test -z "$(CTAGS_ARGS)$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && $(am__cd) $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) "$$here" -cscopelist: cscopelist-am - -cscopelist-am: $(am__tagged_files) - list='$(am__tagged_files)'; \ - case "$(srcdir)" in \ - [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ - *) sdir=$(subdir)/$(srcdir) ;; \ - esac; \ - for i in $$list; do \ - if test -f "$$i"; then \ - echo "$(subdir)/$$i"; \ - else \ - echo "$$sdir/$$i"; \ - fi; \ - done >> $(top_builddir)/cscope.files - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-am -all-am: Makefile $(LTLIBRARIES) -installdirs: -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - if test -z '$(STRIP)'; then \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - install; \ - else \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ - fi -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." - -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) -clean: clean-am - -clean-am: clean-generic clean-libtool clean-noinstLTLIBRARIES \ - mostlyclean-am - -distclean: distclean-am - -rm -rf ./$(DEPDIR) - -rm -f Makefile -distclean-am: clean-am distclean-compile distclean-generic \ - distclean-tags - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -rf ./$(DEPDIR) - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-compile mostlyclean-generic \ - mostlyclean-libtool - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: - -.MAKE: install-am install-strip - -.PHONY: CTAGS GTAGS TAGS all all-am check check-am clean clean-generic \ - clean-libtool clean-noinstLTLIBRARIES cscopelist-am ctags \ - ctags-am distclean distclean-compile distclean-generic \ - distclean-libtool distclean-tags distdir dvi dvi-am html \ - html-am info info-am install install-am install-data \ - install-data-am install-dvi install-dvi-am install-exec \ - install-exec-am install-html install-html-am install-info \ - install-info-am install-man install-pdf install-pdf-am \ - install-ps install-ps-am install-strip installcheck \ - installcheck-am installdirs maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-compile \ - mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ - tags tags-am uninstall uninstall-am - - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/src/plugins/bmc/bmc.c b/src/plugins/bmc/bmc.c index b88b077..eee6936 100644 --- a/src/plugins/bmc/bmc.c +++ b/src/plugins/bmc/bmc.c @@ -68,11 +68,12 @@ static struct ipmi_rs *ipmi_bmc_send_cmd_putmsg(struct ipmi_intf *intf, #define MESSAGE_BUFSIZE 1024 struct ipmi_intf ipmi_bmc_intf = { - name: "bmc", - desc: "IPMI v2.0 BMC interface", - open: ipmi_bmc_open, - close: ipmi_bmc_close, - sendrecv: ipmi_bmc_send_cmd}; + .name = "bmc", + .desc = "IPMI v2.0 BMC interface", + .open = ipmi_bmc_open, + .close = ipmi_bmc_close, + .sendrecv = ipmi_bmc_send_cmd +}; void ipmi_bmc_close(struct ipmi_intf *intf) diff --git a/src/plugins/bmc/bmc.h b/src/plugins/bmc/bmc.h index 0138710..5274897 100644 --- a/src/plugins/bmc/bmc.h +++ b/src/plugins/bmc/bmc.h @@ -30,8 +30,7 @@ * EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. */ -#ifndef _IPMI_BMC_H_ -#define _IPMI_BMC_H_ +#pragma once #ifdef __cplusplus extern "C" { @@ -48,5 +47,3 @@ void ipmi_bmc_close(struct ipmi_intf *intf); #ifdef __cplusplus } #endif - -#endif /* _IPMI_BMC_H_ */ diff --git a/src/plugins/bmc/bmc_intf.h b/src/plugins/bmc/bmc_intf.h index c73e4c1..1d322ba 100644 --- a/src/plugins/bmc/bmc_intf.h +++ b/src/plugins/bmc/bmc_intf.h @@ -30,8 +30,7 @@ * EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. */ -#ifndef _BMC_INTF_H -#define _BMC_INTF_H +#pragma once #pragma ident "@(#)bmc_intf.h 1.2 05/03/07 SMI" @@ -203,5 +202,3 @@ typedef struct bmc_msg { #ifdef __cplusplus } #endif - -#endif /* _BMC_INTF_H */ diff --git a/src/plugins/dbus/Makefile.am b/src/plugins/dbus/Makefile.am new file mode 100644 index 0000000..208f0ad --- /dev/null +++ b/src/plugins/dbus/Makefile.am @@ -0,0 +1,41 @@ + # + # Copyright (c) 2015 IBM Corporation + # All rights reserved. + # + # Redistribution and use in source and binary forms, with or without + # modification,are permitted provided that the following conditions are met: + # + # 1. Redistributions of source code must retain the above copyright notice, + # this list of conditions and the following disclaimer. + # + # 2. Redistributions in binary form must reproduce the above copyright notice, + # this list of conditions and the following disclaimer in the documentation + # and/or other materials provided with the distribution. + # + # 3. Neither the name of the copyright holder nor the names of its contributors + # may be used to endorse or promote products derived from this software + # without specific prior written permission. + # + # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + # AND ANY EXPRESS OR IMPLIED WARRANTIES,INCLUDING, BUT NOT LIMITED TO, THE + # IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + # ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE + # LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + # CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + # SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + # INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + # CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + # ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + # POSSIBILITY OF SUCH DAMAGE. + # + +MAINTAINERCLEANFILES = Makefile.in + +AM_CPPFLAGS = -I$(top_srcdir)/include + +EXTRA_LTLIBRARIES = libintf_dbus.la +noinst_LTLIBRARIES = @INTF_DBUS_LIB@ +libintf_dbus_la_LDFLAGS = -lsystemd +libintf_dbus_la_LIBADD = $(top_builddir)/lib/libipmitool.la +libintf_dbus_la_SOURCES = dbus.c + diff --git a/src/plugins/dbus/dbus.c b/src/plugins/dbus/dbus.c new file mode 100644 index 0000000..be72dcb --- /dev/null +++ b/src/plugins/dbus/dbus.c @@ -0,0 +1,241 @@ +/* + * Copyright (c) 2015 IBM Corporation + * Copyright (c) 2019 Intel Corporation + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. Neither the name of the copyright holder nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ + +#include <sys/file.h> +#include <sys/stat.h> +#include <sys/types.h> +#include <fcntl.h> +#include <errno.h> +#include <unistd.h> +#include <stdbool.h> + +#include <systemd/sd-bus.h> + +#include <ipmitool/log.h> +#include <ipmitool/ipmi.h> +#include <ipmitool/ipmi_intf.h> + +static sd_bus *bus; + +static +struct ipmi_rs * +ipmi_dbus_sendrecv(struct ipmi_intf *intf, + struct ipmi_rq *req) +{ + static const char *destination = "xyz.openbmc_project.Ipmi.Host"; + static const char *object_path = "/xyz/openbmc_project/Ipmi"; + static const char *interface = "xyz.openbmc_project.Ipmi.Server"; + static const char *method_name = "execute"; + static const char SD_BUS_TYPE_3_BYTES[] = { + SD_BUS_TYPE_BYTE, SD_BUS_TYPE_BYTE, SD_BUS_TYPE_BYTE, 0 + }; + static const char SD_BUS_TYPE_4_BYTES[] = { + SD_BUS_TYPE_BYTE, SD_BUS_TYPE_BYTE, + SD_BUS_TYPE_BYTE, SD_BUS_TYPE_BYTE, 0 + }; + static const char SD_BUS_TYPE_DICT_OF_VARIANTS[] = { + SD_BUS_TYPE_ARRAY, + SD_BUS_TYPE_DICT_ENTRY_BEGIN, + SD_BUS_TYPE_STRING, SD_BUS_TYPE_VARIANT, + SD_BUS_TYPE_DICT_ENTRY_END, 0 + }; + static const char SD_BUS_TYPE_IPMI_RESPONSE[] = { + SD_BUS_TYPE_BYTE, SD_BUS_TYPE_BYTE, + SD_BUS_TYPE_BYTE, SD_BUS_TYPE_BYTE, + SD_BUS_TYPE_ARRAY, SD_BUS_TYPE_BYTE, 0 + }; + + sd_bus_message *request = NULL; + int rc; + sd_bus_error error = SD_BUS_ERROR_NULL; + sd_bus_message* reply = NULL; + uint8_t recv_netfn; + uint8_t recv_lun; + uint8_t recv_cmd; + uint8_t recv_cc; + const void *data; + size_t data_len; + static struct ipmi_rs rsp; + struct ipmi_rs *ipmi_response = NULL; + + if (!intf->opened || !bus) + { + goto out_no_free; + } + + rsp.ccode = IPMI_CC_UNSPECIFIED_ERROR; + rsp.data_len = 0; + memset(rsp.data, 0, sizeof(rsp.data)); + + /* The D-Bus xyz.openbmc_project.Ipmi.Server.execute interface + * looks like this: + * + * Request: + * byte: net function + * byte: lun + * byte: command + * byte array: data (possibly zero length) + * array of (string,variant): options + * Response: + * byte: net function + * byte: lun + * byte: command + * byte: completion code + * byte array: response data (possibly zero length) + */ + rc = sd_bus_message_new_method_call(bus, &request, destination, + object_path, interface, + method_name); + if (rc < 0) { + lprintf(LOG_ERR, "%s: failed to create message: %s\n", + __func__, strerror(-rc)); + goto out_no_free; + } + /* pack the header: netfn, lun, cmd */ + rc = sd_bus_message_append(request, SD_BUS_TYPE_3_BYTES, req->msg.netfn, + req->msg.lun, req->msg.cmd); + if (rc < 0) { + lprintf(LOG_ERR, "%s: failed to append parameters\n", __func__); + goto out_free_request; + } + /* pack the variable length data */ + rc = sd_bus_message_append_array(request, SD_BUS_TYPE_BYTE, + req->msg.data, req->msg.data_len); + if (rc < 0) { + lprintf(LOG_ERR, "%s: failed to append body\n", __func__); + goto out_free_request; + } + + /* Options are only needed for session-based channels, but + * in order to fulfill the correct signature, an empty array + * must be packed */ + rc = sd_bus_message_append(request, SD_BUS_TYPE_DICT_OF_VARIANTS, + NULL, 0); + if (rc < 0) { + lprintf(LOG_ERR, "%s: failed to append options\n", __func__); + goto out_free_request; + } + + rc = sd_bus_call(bus, request, 0, &error, &reply); + if (rc < 0) { + lprintf(LOG_ERR, "%s: failed to send dbus message (%s)\n", + __func__, error.message); + goto out_free_request; + } + + /* unpack the response; check that it has the expected types */ + rc = sd_bus_message_enter_container(reply, SD_BUS_TYPE_STRUCT, + SD_BUS_TYPE_IPMI_RESPONSE); + if (rc < 0) { + lprintf(LOG_ERR, "%s: failed to parse reply\n", __func__); + goto out_free_reply; + } + /* read the header: CC netfn lun cmd */ + rc = sd_bus_message_read(reply, SD_BUS_TYPE_4_BYTES, &recv_netfn, + &recv_lun, &recv_cmd, &recv_cc); + if (rc < 0) { + lprintf(LOG_ERR, "%s: failed to read reply\n", __func__); + goto out_free_reply; + } + /* read the variable length data */ + rc = sd_bus_message_read_array(reply, SD_BUS_TYPE_BYTE, + &data, &data_len); + if (rc < 0) { + lprintf(LOG_ERR, "%s: failed to read reply data\n", __func__); + goto out_free_reply; + } + rc = sd_bus_message_exit_container(reply); + if (rc < 0) { + lprintf(LOG_ERR, "%s: final unpack of message failed\n", + __func__); + goto out_free_reply; + } + + if (data_len > sizeof(rsp.data)) { + lprintf(LOG_ERR, "%s: data too long!\n", __func__); + goto out_free_reply; + } + + /* At this point, all the parts are available for a response + * other than unspecified error. */ + rsp.ccode = recv_cc; + rsp.data_len = data_len; + memcpy(rsp.data, data, data_len); + ipmi_response = &rsp; + +out_free_reply: + /* message unref will free resources owned by the message */ + sd_bus_message_unref(reply); +out_free_request: + sd_bus_message_unref(request); +out_no_free: + return ipmi_response; +} + +static +int +ipmi_dbus_setup(struct ipmi_intf *intf) +{ + int rc; + + rc = sd_bus_default_system(&bus); + if (rc < 0) { + lprintf(LOG_ERR, "Can't connect to session bus: %s\n", + strerror(-rc)); + return -1; + } + intf->opened = 1; + + return 0; +} + +static +void +ipmi_dbus_close(struct ipmi_intf *intf) +{ + if (intf->opened) + { + sd_bus_close(bus); + } + intf->opened = 0; +} + +struct ipmi_intf ipmi_dbus_intf = { + .name = "dbus", + .desc = "OpenBMC D-Bus interface", + .setup = ipmi_dbus_setup, + .close = ipmi_dbus_close, + .sendrecv = ipmi_dbus_sendrecv, +}; + + diff --git a/src/plugins/dummy/Makefile.in b/src/plugins/dummy/Makefile.in deleted file mode 100644 index 1850430..0000000 --- a/src/plugins/dummy/Makefile.in +++ /dev/null @@ -1,607 +0,0 @@ -# Makefile.in generated by automake 1.14.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994-2013 Free Software Foundation, Inc. - -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -VPATH = @srcdir@ -am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' -am__make_running_with_option = \ - case $${target_option-} in \ - ?) ;; \ - *) echo "am__make_running_with_option: internal error: invalid" \ - "target option '$${target_option-}' specified" >&2; \ - exit 1;; \ - esac; \ - has_opt=no; \ - sane_makeflags=$$MAKEFLAGS; \ - if $(am__is_gnu_make); then \ - sane_makeflags=$$MFLAGS; \ - else \ - case $$MAKEFLAGS in \ - *\\[\ \ ]*) \ - bs=\\; \ - sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ - | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ - esac; \ - fi; \ - skip_next=no; \ - strip_trailopt () \ - { \ - flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ - }; \ - for flg in $$sane_makeflags; do \ - test $$skip_next = yes && { skip_next=no; continue; }; \ - case $$flg in \ - *=*|--*) continue;; \ - -*I) strip_trailopt 'I'; skip_next=yes;; \ - -*I?*) strip_trailopt 'I';; \ - -*O) strip_trailopt 'O'; skip_next=yes;; \ - -*O?*) strip_trailopt 'O';; \ - -*l) strip_trailopt 'l'; skip_next=yes;; \ - -*l?*) strip_trailopt 'l';; \ - -[dEDm]) skip_next=yes;; \ - -[JT]) skip_next=yes;; \ - esac; \ - case $$flg in \ - *$$target_option*) has_opt=yes; break;; \ - esac; \ - done; \ - test $$has_opt = yes -am__make_dryrun = (target_option=n; $(am__make_running_with_option)) -am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -target_triplet = @target@ -subdir = src/plugins/dummy -DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ - $(top_srcdir)/depcomp -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(install_sh) -d -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -LTLIBRARIES = $(noinst_LTLIBRARIES) -libintf_dummy_la_DEPENDENCIES = $(top_builddir)/lib/libipmitool.la -am_libintf_dummy_la_OBJECTS = dummy.lo -libintf_dummy_la_OBJECTS = $(am_libintf_dummy_la_OBJECTS) -AM_V_lt = $(am__v_lt_@AM_V@) -am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@) -am__v_lt_0 = --silent -am__v_lt_1 = -AM_V_P = $(am__v_P_@AM_V@) -am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) -am__v_P_0 = false -am__v_P_1 = : -AM_V_GEN = $(am__v_GEN_@AM_V@) -am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) -am__v_GEN_0 = @echo " GEN " $@; -am__v_GEN_1 = -AM_V_at = $(am__v_at_@AM_V@) -am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) -am__v_at_0 = @ -am__v_at_1 = -DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) -depcomp = $(SHELL) $(top_srcdir)/depcomp -am__depfiles_maybe = depfiles -am__mv = mv -f -COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ - $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ - $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \ - $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ - $(AM_CFLAGS) $(CFLAGS) -AM_V_CC = $(am__v_CC_@AM_V@) -am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@) -am__v_CC_0 = @echo " CC " $@; -am__v_CC_1 = -CCLD = $(CC) -LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ - $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ - $(AM_LDFLAGS) $(LDFLAGS) -o $@ -AM_V_CCLD = $(am__v_CCLD_@AM_V@) -am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@) -am__v_CCLD_0 = @echo " CCLD " $@; -am__v_CCLD_1 = -SOURCES = $(libintf_dummy_la_SOURCES) -DIST_SOURCES = $(libintf_dummy_la_SOURCES) -am__can_run_installinfo = \ - case $$AM_UPDATE_INFO_DIR in \ - n|no|NO) false;; \ - *) (install-info --version) >/dev/null 2>&1;; \ - esac -am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) -# Read a list of newline-separated strings from the standard input, -# and print each of them once, without duplicates. Input order is -# *not* preserved. -am__uniquify_input = $(AWK) '\ - BEGIN { nonempty = 0; } \ - { items[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in items) print i; }; } \ -' -# Make sure the list of sources is unique. This is necessary because, -# e.g., the same source file might be shared among _SOURCES variables -# for different programs/libraries. -am__define_uniq_tagged_files = \ - list='$(am__tagged_files)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | $(am__uniquify_input)` -ETAGS = etags -CTAGS = ctags -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -ARCH = @ARCH@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BASEDIR = @BASEDIR@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DISTRO = @DISTRO@ -DLLTOOL = @DLLTOOL@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FGREP = @FGREP@ -GREP = @GREP@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INTF_BMC = @INTF_BMC@ -INTF_BMC_LIB = @INTF_BMC_LIB@ -INTF_DUMMY = @INTF_DUMMY@ -INTF_DUMMY_LIB = @INTF_DUMMY_LIB@ -INTF_FREE = @INTF_FREE@ -INTF_FREE_LIB = @INTF_FREE_LIB@ -INTF_IMB = @INTF_IMB@ -INTF_IMB_LIB = @INTF_IMB_LIB@ -INTF_LAN = @INTF_LAN@ -INTF_LANPLUS = @INTF_LANPLUS@ -INTF_LANPLUS_LIB = @INTF_LANPLUS_LIB@ -INTF_LAN_LIB = @INTF_LAN_LIB@ -INTF_LIPMI = @INTF_LIPMI@ -INTF_LIPMI_LIB = @INTF_LIPMI_LIB@ -INTF_OPEN = @INTF_OPEN@ -INTF_OPEN_LIB = @INTF_OPEN_LIB@ -INTF_SERIAL = @INTF_SERIAL@ -INTF_SERIAL_LIB = @INTF_SERIAL_LIB@ -INTF_USB = @INTF_USB@ -INTF_USB_LIB = @INTF_USB_LIB@ -IPMITOOL_INTF_LIB = @IPMITOOL_INTF_LIB@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ -MKDIR_P = @MKDIR_P@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OS = @OS@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -POW_LIB = @POW_LIB@ -PSTAMP = @PSTAMP@ -RANLIB = @RANLIB@ -RPMBUILD = @RPMBUILD@ -RPM_RELEASE = @RPM_RELEASE@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -VERSION = @VERSION@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_configure_args = @ac_configure_args@ -ac_ct_AR = @ac_ct_AR@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target = @target@ -target_alias = @target_alias@ -target_cpu = @target_cpu@ -target_os = @target_os@ -target_vendor = @target_vendor@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -MAINTAINERCLEANFILES = Makefile.in -AM_CPPFLAGS = -I$(top_srcdir)/include -EXTRA_LTLIBRARIES = libintf_dummy.la -noinst_LTLIBRARIES = @INTF_DUMMY_LIB@ -libintf_dummy_la_LIBADD = $(top_builddir)/lib/libipmitool.la -libintf_dummy_la_SOURCES = dummy.c dummy.h -all: all-am - -.SUFFIXES: -.SUFFIXES: .c .lo .o .obj -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/plugins/dummy/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign src/plugins/dummy/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): - -clean-noinstLTLIBRARIES: - -test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES) - @list='$(noinst_LTLIBRARIES)'; \ - locs=`for p in $$list; do echo $$p; done | \ - sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \ - sort -u`; \ - test -z "$$locs" || { \ - echo rm -f $${locs}; \ - rm -f $${locs}; \ - } - -libintf_dummy.la: $(libintf_dummy_la_OBJECTS) $(libintf_dummy_la_DEPENDENCIES) $(EXTRA_libintf_dummy_la_DEPENDENCIES) - $(AM_V_CCLD)$(LINK) $(libintf_dummy_la_OBJECTS) $(libintf_dummy_la_LIBADD) $(LIBS) - -mostlyclean-compile: - -rm -f *.$(OBJEXT) - -distclean-compile: - -rm -f *.tab.c - -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dummy.Plo@am__quote@ - -.c.o: -@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $< - -.c.obj: -@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'` - -.c.lo: -@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $< - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs - -ID: $(am__tagged_files) - $(am__define_uniq_tagged_files); mkid -fID $$unique -tags: tags-am -TAGS: tags - -tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) - set x; \ - here=`pwd`; \ - $(am__define_uniq_tagged_files); \ - shift; \ - if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - if test $$# -gt 0; then \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - "$$@" $$unique; \ - else \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$unique; \ - fi; \ - fi -ctags: ctags-am - -CTAGS: ctags -ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) - $(am__define_uniq_tagged_files); \ - test -z "$(CTAGS_ARGS)$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && $(am__cd) $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) "$$here" -cscopelist: cscopelist-am - -cscopelist-am: $(am__tagged_files) - list='$(am__tagged_files)'; \ - case "$(srcdir)" in \ - [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ - *) sdir=$(subdir)/$(srcdir) ;; \ - esac; \ - for i in $$list; do \ - if test -f "$$i"; then \ - echo "$(subdir)/$$i"; \ - else \ - echo "$$sdir/$$i"; \ - fi; \ - done >> $(top_builddir)/cscope.files - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-am -all-am: Makefile $(LTLIBRARIES) -installdirs: -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - if test -z '$(STRIP)'; then \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - install; \ - else \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ - fi -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." - -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) -clean: clean-am - -clean-am: clean-generic clean-libtool clean-noinstLTLIBRARIES \ - mostlyclean-am - -distclean: distclean-am - -rm -rf ./$(DEPDIR) - -rm -f Makefile -distclean-am: clean-am distclean-compile distclean-generic \ - distclean-tags - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -rf ./$(DEPDIR) - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-compile mostlyclean-generic \ - mostlyclean-libtool - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: - -.MAKE: install-am install-strip - -.PHONY: CTAGS GTAGS TAGS all all-am check check-am clean clean-generic \ - clean-libtool clean-noinstLTLIBRARIES cscopelist-am ctags \ - ctags-am distclean distclean-compile distclean-generic \ - distclean-libtool distclean-tags distdir dvi dvi-am html \ - html-am info info-am install install-am install-data \ - install-data-am install-dvi install-dvi-am install-exec \ - install-exec-am install-html install-html-am install-info \ - install-info-am install-man install-pdf install-pdf-am \ - install-ps install-ps-am install-strip installcheck \ - installcheck-am installdirs maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-compile \ - mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ - tags tags-am uninstall uninstall-am - - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/src/plugins/dummy/dummy.c b/src/plugins/dummy/dummy.c index 8600a84..3a86656 100644 --- a/src/plugins/dummy/dummy.c +++ b/src/plugins/dummy/dummy.c @@ -179,10 +179,9 @@ ipmi_dummyipmi_open(struct ipmi_intf *intf) char *dummy_sock_path; dummy_sock_path = getenv("IPMI_DUMMY_SOCK"); - if (dummy_sock_path == NULL) { - lprintf(LOG_DEBUG, "No IPMI_DUMMY_SOCK set. Dummy mode ON."); - intf->opened = 1; - return intf->fd; + if (!dummy_sock_path) { + lprintf(LOG_DEBUG, "No IPMI_DUMMY_SOCK set. Using " IPMI_DUMMY_DEFAULTSOCK); + dummy_sock_path = IPMI_DUMMY_DEFAULTSOCK; } if (intf->opened == 1) { @@ -218,13 +217,8 @@ ipmi_dummyipmi_send_cmd(struct ipmi_intf *intf, struct ipmi_rq *req) static struct ipmi_rs rsp; struct dummy_rq req_dummy; struct dummy_rs rsp_dummy; - char *dummy_sock_path; - dummy_sock_path = getenv("IPMI_DUMMY_SOCK"); - if (dummy_sock_path == NULL) { - lprintf(LOG_DEBUG, "No IPMI_DUMMY_SOCK set. Dummy mode ON."); - return NULL; - } - if (intf == NULL || intf->fd < 0 || intf->opened != 1) { + + if (!intf || intf->fd < 0 || intf->opened != 1) { lprintf(LOG_ERR, "dummy failed on intf check."); return NULL; } diff --git a/src/plugins/dummy/dummy.h b/src/plugins/dummy/dummy.h index bbe3aa3..e6a170a 100644 --- a/src/plugins/dummy/dummy.h +++ b/src/plugins/dummy/dummy.h @@ -1,5 +1,6 @@ -#ifndef IPMI_DUMMYIPMI_H -# define IPMI_DUMMYIPMI_H +#pragma once + +#define IPMI_DUMMY_DEFAULTSOCK "/tmp/.ipmi_dummy" struct dummy_rq { struct { @@ -24,5 +25,3 @@ struct dummy_rs { int data_len; uint8_t *data; }; - -#endif diff --git a/src/plugins/free/Makefile.in b/src/plugins/free/Makefile.in deleted file mode 100644 index cc33b93..0000000 --- a/src/plugins/free/Makefile.in +++ /dev/null @@ -1,612 +0,0 @@ -# Makefile.in generated by automake 1.14.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994-2013 Free Software Foundation, Inc. - -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -VPATH = @srcdir@ -am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' -am__make_running_with_option = \ - case $${target_option-} in \ - ?) ;; \ - *) echo "am__make_running_with_option: internal error: invalid" \ - "target option '$${target_option-}' specified" >&2; \ - exit 1;; \ - esac; \ - has_opt=no; \ - sane_makeflags=$$MAKEFLAGS; \ - if $(am__is_gnu_make); then \ - sane_makeflags=$$MFLAGS; \ - else \ - case $$MAKEFLAGS in \ - *\\[\ \ ]*) \ - bs=\\; \ - sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ - | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ - esac; \ - fi; \ - skip_next=no; \ - strip_trailopt () \ - { \ - flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ - }; \ - for flg in $$sane_makeflags; do \ - test $$skip_next = yes && { skip_next=no; continue; }; \ - case $$flg in \ - *=*|--*) continue;; \ - -*I) strip_trailopt 'I'; skip_next=yes;; \ - -*I?*) strip_trailopt 'I';; \ - -*O) strip_trailopt 'O'; skip_next=yes;; \ - -*O?*) strip_trailopt 'O';; \ - -*l) strip_trailopt 'l'; skip_next=yes;; \ - -*l?*) strip_trailopt 'l';; \ - -[dEDm]) skip_next=yes;; \ - -[JT]) skip_next=yes;; \ - esac; \ - case $$flg in \ - *$$target_option*) has_opt=yes; break;; \ - esac; \ - done; \ - test $$has_opt = yes -am__make_dryrun = (target_option=n; $(am__make_running_with_option)) -am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -target_triplet = @target@ -subdir = src/plugins/free -DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ - $(top_srcdir)/depcomp -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(install_sh) -d -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -LTLIBRARIES = $(noinst_LTLIBRARIES) -libintf_free_la_DEPENDENCIES = $(top_builddir)/lib/libipmitool.la -am_libintf_free_la_OBJECTS = free.lo -libintf_free_la_OBJECTS = $(am_libintf_free_la_OBJECTS) -AM_V_lt = $(am__v_lt_@AM_V@) -am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@) -am__v_lt_0 = --silent -am__v_lt_1 = -libintf_free_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC \ - $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CCLD) \ - $(AM_CFLAGS) $(CFLAGS) $(libintf_free_la_LDFLAGS) $(LDFLAGS) \ - -o $@ -AM_V_P = $(am__v_P_@AM_V@) -am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) -am__v_P_0 = false -am__v_P_1 = : -AM_V_GEN = $(am__v_GEN_@AM_V@) -am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) -am__v_GEN_0 = @echo " GEN " $@; -am__v_GEN_1 = -AM_V_at = $(am__v_at_@AM_V@) -am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) -am__v_at_0 = @ -am__v_at_1 = -DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) -depcomp = $(SHELL) $(top_srcdir)/depcomp -am__depfiles_maybe = depfiles -am__mv = mv -f -COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ - $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ - $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \ - $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ - $(AM_CFLAGS) $(CFLAGS) -AM_V_CC = $(am__v_CC_@AM_V@) -am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@) -am__v_CC_0 = @echo " CC " $@; -am__v_CC_1 = -CCLD = $(CC) -LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ - $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ - $(AM_LDFLAGS) $(LDFLAGS) -o $@ -AM_V_CCLD = $(am__v_CCLD_@AM_V@) -am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@) -am__v_CCLD_0 = @echo " CCLD " $@; -am__v_CCLD_1 = -SOURCES = $(libintf_free_la_SOURCES) -DIST_SOURCES = $(libintf_free_la_SOURCES) -am__can_run_installinfo = \ - case $$AM_UPDATE_INFO_DIR in \ - n|no|NO) false;; \ - *) (install-info --version) >/dev/null 2>&1;; \ - esac -am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) -# Read a list of newline-separated strings from the standard input, -# and print each of them once, without duplicates. Input order is -# *not* preserved. -am__uniquify_input = $(AWK) '\ - BEGIN { nonempty = 0; } \ - { items[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in items) print i; }; } \ -' -# Make sure the list of sources is unique. This is necessary because, -# e.g., the same source file might be shared among _SOURCES variables -# for different programs/libraries. -am__define_uniq_tagged_files = \ - list='$(am__tagged_files)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | $(am__uniquify_input)` -ETAGS = etags -CTAGS = ctags -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -ARCH = @ARCH@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BASEDIR = @BASEDIR@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DISTRO = @DISTRO@ -DLLTOOL = @DLLTOOL@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FGREP = @FGREP@ -GREP = @GREP@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INTF_BMC = @INTF_BMC@ -INTF_BMC_LIB = @INTF_BMC_LIB@ -INTF_DUMMY = @INTF_DUMMY@ -INTF_DUMMY_LIB = @INTF_DUMMY_LIB@ -INTF_FREE = @INTF_FREE@ -INTF_FREE_LIB = @INTF_FREE_LIB@ -INTF_IMB = @INTF_IMB@ -INTF_IMB_LIB = @INTF_IMB_LIB@ -INTF_LAN = @INTF_LAN@ -INTF_LANPLUS = @INTF_LANPLUS@ -INTF_LANPLUS_LIB = @INTF_LANPLUS_LIB@ -INTF_LAN_LIB = @INTF_LAN_LIB@ -INTF_LIPMI = @INTF_LIPMI@ -INTF_LIPMI_LIB = @INTF_LIPMI_LIB@ -INTF_OPEN = @INTF_OPEN@ -INTF_OPEN_LIB = @INTF_OPEN_LIB@ -INTF_SERIAL = @INTF_SERIAL@ -INTF_SERIAL_LIB = @INTF_SERIAL_LIB@ -INTF_USB = @INTF_USB@ -INTF_USB_LIB = @INTF_USB_LIB@ -IPMITOOL_INTF_LIB = @IPMITOOL_INTF_LIB@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ -MKDIR_P = @MKDIR_P@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OS = @OS@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -POW_LIB = @POW_LIB@ -PSTAMP = @PSTAMP@ -RANLIB = @RANLIB@ -RPMBUILD = @RPMBUILD@ -RPM_RELEASE = @RPM_RELEASE@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -VERSION = @VERSION@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_configure_args = @ac_configure_args@ -ac_ct_AR = @ac_ct_AR@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target = @target@ -target_alias = @target_alias@ -target_cpu = @target_cpu@ -target_os = @target_os@ -target_vendor = @target_vendor@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -MAINTAINERCLEANFILES = Makefile.in -AM_CPPFLAGS = -I$(top_srcdir)/include -EXTRA_LTLIBRARIES = libintf_free.la -noinst_LTLIBRARIES = @INTF_FREE_LIB@ -libintf_free_la_LIBADD = $(top_builddir)/lib/libipmitool.la -libintf_free_la_SOURCES = free.c -libintf_free_la_LDFLAGS = -lfreeipmi -all: all-am - -.SUFFIXES: -.SUFFIXES: .c .lo .o .obj -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/plugins/free/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign src/plugins/free/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): - -clean-noinstLTLIBRARIES: - -test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES) - @list='$(noinst_LTLIBRARIES)'; \ - locs=`for p in $$list; do echo $$p; done | \ - sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \ - sort -u`; \ - test -z "$$locs" || { \ - echo rm -f $${locs}; \ - rm -f $${locs}; \ - } - -libintf_free.la: $(libintf_free_la_OBJECTS) $(libintf_free_la_DEPENDENCIES) $(EXTRA_libintf_free_la_DEPENDENCIES) - $(AM_V_CCLD)$(libintf_free_la_LINK) $(libintf_free_la_OBJECTS) $(libintf_free_la_LIBADD) $(LIBS) - -mostlyclean-compile: - -rm -f *.$(OBJEXT) - -distclean-compile: - -rm -f *.tab.c - -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/free.Plo@am__quote@ - -.c.o: -@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $< - -.c.obj: -@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'` - -.c.lo: -@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $< - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs - -ID: $(am__tagged_files) - $(am__define_uniq_tagged_files); mkid -fID $$unique -tags: tags-am -TAGS: tags - -tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) - set x; \ - here=`pwd`; \ - $(am__define_uniq_tagged_files); \ - shift; \ - if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - if test $$# -gt 0; then \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - "$$@" $$unique; \ - else \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$unique; \ - fi; \ - fi -ctags: ctags-am - -CTAGS: ctags -ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) - $(am__define_uniq_tagged_files); \ - test -z "$(CTAGS_ARGS)$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && $(am__cd) $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) "$$here" -cscopelist: cscopelist-am - -cscopelist-am: $(am__tagged_files) - list='$(am__tagged_files)'; \ - case "$(srcdir)" in \ - [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ - *) sdir=$(subdir)/$(srcdir) ;; \ - esac; \ - for i in $$list; do \ - if test -f "$$i"; then \ - echo "$(subdir)/$$i"; \ - else \ - echo "$$sdir/$$i"; \ - fi; \ - done >> $(top_builddir)/cscope.files - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-am -all-am: Makefile $(LTLIBRARIES) -installdirs: -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - if test -z '$(STRIP)'; then \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - install; \ - else \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ - fi -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." - -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) -clean: clean-am - -clean-am: clean-generic clean-libtool clean-noinstLTLIBRARIES \ - mostlyclean-am - -distclean: distclean-am - -rm -rf ./$(DEPDIR) - -rm -f Makefile -distclean-am: clean-am distclean-compile distclean-generic \ - distclean-tags - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -rf ./$(DEPDIR) - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-compile mostlyclean-generic \ - mostlyclean-libtool - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: - -.MAKE: install-am install-strip - -.PHONY: CTAGS GTAGS TAGS all all-am check check-am clean clean-generic \ - clean-libtool clean-noinstLTLIBRARIES cscopelist-am ctags \ - ctags-am distclean distclean-compile distclean-generic \ - distclean-libtool distclean-tags distdir dvi dvi-am html \ - html-am info info-am install install-am install-data \ - install-data-am install-dvi install-dvi-am install-exec \ - install-exec-am install-html install-html-am install-info \ - install-info-am install-man install-pdf install-pdf-am \ - install-ps install-ps-am install-strip installcheck \ - installcheck-am installdirs maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-compile \ - mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ - tags tags-am uninstall uninstall-am - - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/src/plugins/free/free.c b/src/plugins/free/free.c index 56c8157..832f29b 100644 --- a/src/plugins/free/free.c +++ b/src/plugins/free/free.c @@ -42,9 +42,11 @@ #include <stdlib.h> #include <string.h> #include <sys/types.h> +#include <unistd.h> #include <ipmitool/ipmi.h> #include <ipmitool/ipmi_intf.h> +#include <ipmitool/ipmi_sel.h> #include <freeipmi/freeipmi.h> #if IPMI_INTF_FREE_0_3_0 || IPMI_INTF_FREE_0_4_0 || IPMI_INTF_FREE_0_5_0 @@ -61,8 +63,6 @@ extern int verbose; static int ipmi_free_open(struct ipmi_intf * intf) { - int kcs_ret = -1, ssif_ret = -1; - if (getuid() != 0) { fprintf(stderr, "Permission denied, must be root\n"); return -1; @@ -308,11 +308,11 @@ static struct ipmi_rs * ipmi_free_send_cmd(struct ipmi_intf * intf, struct ipmi_ } struct ipmi_intf ipmi_free_intf = { - name: "free", - desc: "FreeIPMI IPMI Interface", - open: ipmi_free_open, - close: ipmi_free_close, - sendrecv: ipmi_free_send_cmd, - target_addr: IPMI_BMC_SLAVE_ADDR, + .name = "free", + .desc = "FreeIPMI IPMI Interface", + .open = ipmi_free_open, + .close = ipmi_free_close, + .sendrecv = ipmi_free_send_cmd, + .target_addr = IPMI_BMC_SLAVE_ADDR, }; diff --git a/src/plugins/imb/Makefile.in b/src/plugins/imb/Makefile.in deleted file mode 100644 index 1e40e15..0000000 --- a/src/plugins/imb/Makefile.in +++ /dev/null @@ -1,638 +0,0 @@ -# Makefile.in generated by automake 1.14.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994-2013 Free Software Foundation, Inc. - -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -# Copyright (c) 2003 Sun Microsystems, Inc. All Rights Reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# Redistribution of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# -# Redistribution in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in the -# documentation and/or other materials provided with the distribution. -# -# Neither the name of Sun Microsystems, Inc. or the names of -# contributors may be used to endorse or promote products derived -# from this software without specific prior written permission. -# -# This software is provided "AS IS," without a warranty of any kind. -# ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, -# INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A -# PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY EXCLUDED. -# SUN MICROSYSTEMS, INC. ("SUN") AND ITS LICENSORS SHALL NOT BE LIABLE -# FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING -# OR DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES. IN NO EVENT WILL -# SUN OR ITS LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA, -# OR FOR DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR -# PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF -# LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE, -# EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. - -VPATH = @srcdir@ -am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' -am__make_running_with_option = \ - case $${target_option-} in \ - ?) ;; \ - *) echo "am__make_running_with_option: internal error: invalid" \ - "target option '$${target_option-}' specified" >&2; \ - exit 1;; \ - esac; \ - has_opt=no; \ - sane_makeflags=$$MAKEFLAGS; \ - if $(am__is_gnu_make); then \ - sane_makeflags=$$MFLAGS; \ - else \ - case $$MAKEFLAGS in \ - *\\[\ \ ]*) \ - bs=\\; \ - sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ - | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ - esac; \ - fi; \ - skip_next=no; \ - strip_trailopt () \ - { \ - flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ - }; \ - for flg in $$sane_makeflags; do \ - test $$skip_next = yes && { skip_next=no; continue; }; \ - case $$flg in \ - *=*|--*) continue;; \ - -*I) strip_trailopt 'I'; skip_next=yes;; \ - -*I?*) strip_trailopt 'I';; \ - -*O) strip_trailopt 'O'; skip_next=yes;; \ - -*O?*) strip_trailopt 'O';; \ - -*l) strip_trailopt 'l'; skip_next=yes;; \ - -*l?*) strip_trailopt 'l';; \ - -[dEDm]) skip_next=yes;; \ - -[JT]) skip_next=yes;; \ - esac; \ - case $$flg in \ - *$$target_option*) has_opt=yes; break;; \ - esac; \ - done; \ - test $$has_opt = yes -am__make_dryrun = (target_option=n; $(am__make_running_with_option)) -am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -target_triplet = @target@ -subdir = src/plugins/imb -DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ - $(top_srcdir)/depcomp -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(install_sh) -d -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -LTLIBRARIES = $(noinst_LTLIBRARIES) -libintf_imb_la_DEPENDENCIES = $(top_builddir)/lib/libipmitool.la -am_libintf_imb_la_OBJECTS = imbapi.lo imb.lo -libintf_imb_la_OBJECTS = $(am_libintf_imb_la_OBJECTS) -AM_V_lt = $(am__v_lt_@AM_V@) -am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@) -am__v_lt_0 = --silent -am__v_lt_1 = -AM_V_P = $(am__v_P_@AM_V@) -am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) -am__v_P_0 = false -am__v_P_1 = : -AM_V_GEN = $(am__v_GEN_@AM_V@) -am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) -am__v_GEN_0 = @echo " GEN " $@; -am__v_GEN_1 = -AM_V_at = $(am__v_at_@AM_V@) -am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) -am__v_at_0 = @ -am__v_at_1 = -DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) -depcomp = $(SHELL) $(top_srcdir)/depcomp -am__depfiles_maybe = depfiles -am__mv = mv -f -COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ - $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ - $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \ - $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ - $(AM_CFLAGS) $(CFLAGS) -AM_V_CC = $(am__v_CC_@AM_V@) -am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@) -am__v_CC_0 = @echo " CC " $@; -am__v_CC_1 = -CCLD = $(CC) -LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ - $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ - $(AM_LDFLAGS) $(LDFLAGS) -o $@ -AM_V_CCLD = $(am__v_CCLD_@AM_V@) -am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@) -am__v_CCLD_0 = @echo " CCLD " $@; -am__v_CCLD_1 = -SOURCES = $(libintf_imb_la_SOURCES) -DIST_SOURCES = $(libintf_imb_la_SOURCES) -am__can_run_installinfo = \ - case $$AM_UPDATE_INFO_DIR in \ - n|no|NO) false;; \ - *) (install-info --version) >/dev/null 2>&1;; \ - esac -am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) -# Read a list of newline-separated strings from the standard input, -# and print each of them once, without duplicates. Input order is -# *not* preserved. -am__uniquify_input = $(AWK) '\ - BEGIN { nonempty = 0; } \ - { items[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in items) print i; }; } \ -' -# Make sure the list of sources is unique. This is necessary because, -# e.g., the same source file might be shared among _SOURCES variables -# for different programs/libraries. -am__define_uniq_tagged_files = \ - list='$(am__tagged_files)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | $(am__uniquify_input)` -ETAGS = etags -CTAGS = ctags -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -ARCH = @ARCH@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BASEDIR = @BASEDIR@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DISTRO = @DISTRO@ -DLLTOOL = @DLLTOOL@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FGREP = @FGREP@ -GREP = @GREP@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INTF_BMC = @INTF_BMC@ -INTF_BMC_LIB = @INTF_BMC_LIB@ -INTF_DUMMY = @INTF_DUMMY@ -INTF_DUMMY_LIB = @INTF_DUMMY_LIB@ -INTF_FREE = @INTF_FREE@ -INTF_FREE_LIB = @INTF_FREE_LIB@ -INTF_IMB = @INTF_IMB@ -INTF_IMB_LIB = @INTF_IMB_LIB@ -INTF_LAN = @INTF_LAN@ -INTF_LANPLUS = @INTF_LANPLUS@ -INTF_LANPLUS_LIB = @INTF_LANPLUS_LIB@ -INTF_LAN_LIB = @INTF_LAN_LIB@ -INTF_LIPMI = @INTF_LIPMI@ -INTF_LIPMI_LIB = @INTF_LIPMI_LIB@ -INTF_OPEN = @INTF_OPEN@ -INTF_OPEN_LIB = @INTF_OPEN_LIB@ -INTF_SERIAL = @INTF_SERIAL@ -INTF_SERIAL_LIB = @INTF_SERIAL_LIB@ -INTF_USB = @INTF_USB@ -INTF_USB_LIB = @INTF_USB_LIB@ -IPMITOOL_INTF_LIB = @IPMITOOL_INTF_LIB@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ -MKDIR_P = @MKDIR_P@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OS = @OS@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -POW_LIB = @POW_LIB@ -PSTAMP = @PSTAMP@ -RANLIB = @RANLIB@ -RPMBUILD = @RPMBUILD@ -RPM_RELEASE = @RPM_RELEASE@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -VERSION = @VERSION@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_configure_args = @ac_configure_args@ -ac_ct_AR = @ac_ct_AR@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target = @target@ -target_alias = @target_alias@ -target_cpu = @target_cpu@ -target_os = @target_os@ -target_vendor = @target_vendor@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -MAINTAINERCLEANFILES = Makefile.in -AM_CPPFLAGS = -I$(top_srcdir)/include -EXTRA_LTLIBRARIES = libintf_imb.la -noinst_LTLIBRARIES = @INTF_IMB_LIB@ -libintf_imb_la_LIBADD = $(top_builddir)/lib/libipmitool.la -libintf_imb_la_SOURCES = imbapi.c imbapi.h imb.c -all: all-am - -.SUFFIXES: -.SUFFIXES: .c .lo .o .obj -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/plugins/imb/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign src/plugins/imb/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): - -clean-noinstLTLIBRARIES: - -test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES) - @list='$(noinst_LTLIBRARIES)'; \ - locs=`for p in $$list; do echo $$p; done | \ - sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \ - sort -u`; \ - test -z "$$locs" || { \ - echo rm -f $${locs}; \ - rm -f $${locs}; \ - } - -libintf_imb.la: $(libintf_imb_la_OBJECTS) $(libintf_imb_la_DEPENDENCIES) $(EXTRA_libintf_imb_la_DEPENDENCIES) - $(AM_V_CCLD)$(LINK) $(libintf_imb_la_OBJECTS) $(libintf_imb_la_LIBADD) $(LIBS) - -mostlyclean-compile: - -rm -f *.$(OBJEXT) - -distclean-compile: - -rm -f *.tab.c - -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/imb.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/imbapi.Plo@am__quote@ - -.c.o: -@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $< - -.c.obj: -@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'` - -.c.lo: -@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $< - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs - -ID: $(am__tagged_files) - $(am__define_uniq_tagged_files); mkid -fID $$unique -tags: tags-am -TAGS: tags - -tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) - set x; \ - here=`pwd`; \ - $(am__define_uniq_tagged_files); \ - shift; \ - if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - if test $$# -gt 0; then \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - "$$@" $$unique; \ - else \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$unique; \ - fi; \ - fi -ctags: ctags-am - -CTAGS: ctags -ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) - $(am__define_uniq_tagged_files); \ - test -z "$(CTAGS_ARGS)$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && $(am__cd) $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) "$$here" -cscopelist: cscopelist-am - -cscopelist-am: $(am__tagged_files) - list='$(am__tagged_files)'; \ - case "$(srcdir)" in \ - [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ - *) sdir=$(subdir)/$(srcdir) ;; \ - esac; \ - for i in $$list; do \ - if test -f "$$i"; then \ - echo "$(subdir)/$$i"; \ - else \ - echo "$$sdir/$$i"; \ - fi; \ - done >> $(top_builddir)/cscope.files - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-am -all-am: Makefile $(LTLIBRARIES) -installdirs: -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - if test -z '$(STRIP)'; then \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - install; \ - else \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ - fi -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." - -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) -clean: clean-am - -clean-am: clean-generic clean-libtool clean-noinstLTLIBRARIES \ - mostlyclean-am - -distclean: distclean-am - -rm -rf ./$(DEPDIR) - -rm -f Makefile -distclean-am: clean-am distclean-compile distclean-generic \ - distclean-tags - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -rf ./$(DEPDIR) - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-compile mostlyclean-generic \ - mostlyclean-libtool - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: - -.MAKE: install-am install-strip - -.PHONY: CTAGS GTAGS TAGS all all-am check check-am clean clean-generic \ - clean-libtool clean-noinstLTLIBRARIES cscopelist-am ctags \ - ctags-am distclean distclean-compile distclean-generic \ - distclean-libtool distclean-tags distdir dvi dvi-am html \ - html-am info info-am install install-am install-data \ - install-data-am install-dvi install-dvi-am install-exec \ - install-exec-am install-html install-html-am install-info \ - install-info-am install-man install-pdf install-pdf-am \ - install-ps install-ps-am install-strip installcheck \ - installcheck-am installdirs maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-compile \ - mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ - tags tags-am uninstall uninstall-am - - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/src/plugins/imb/imb.c b/src/plugins/imb/imb.c index 1514fa7..27d59e8 100644 --- a/src/plugins/imb/imb.c +++ b/src/plugins/imb/imb.c @@ -62,7 +62,7 @@ static int ipmi_imb_open(struct ipmi_intf * intf) printf("Error: no IMB driver found at %s!\n", IPMI_IMB_DEV); return -1; } - + intf->opened = 1; intf->manufacturer_id = ipmi_get_oem(intf); @@ -75,10 +75,10 @@ static void ipmi_imb_close(struct ipmi_intf * intf) intf->manufacturer_id = IPMI_OEM_UNKNOWN; } -static struct ipmi_rs * ipmi_imb_send_cmd(struct ipmi_intf * intf, struct ipmi_rq * req) +static struct ipmi_rs * ipmi_imb_send_cmd(struct ipmi_intf *__UNUSED__(intf), struct ipmi_rq *req) { IMBPREQUESTDATA imbreq; - static struct ipmi_rs rsp; + static struct ipmi_rs rsp; int status, i; unsigned char ccode; diff --git a/src/plugins/imb/imbapi.c b/src/plugins/imb/imbapi.c index 34c9c82..b27486d 100644 --- a/src/plugins/imb/imbapi.c +++ b/src/plugins/imb/imbapi.c @@ -60,11 +60,12 @@ #include "imbapi.h" #include <sys/socket.h> +#include <ipmitool/helper.h> #include <ipmitool/log.h> #ifdef SCO_UW # define NO_MACRO_ARGS 1 -# define __FUNCTION__ "func" +# define __func__ "func" # define IMB_DEVICE "/dev/instru/mismic" #else # define IMB_DEVICE "/dev/imb" @@ -117,7 +118,7 @@ open_imb(void) OPEN_EXISTING, FILE_ATTRIBUTE_NORMAL, NULL); - if (hDevice == NULL || hDevice == INVALID_HANDLE_VALUE) { + if (!hDevice || INVALID_HANDLE_VALUE == hDevice) { return 0; } /* Detect the IPMI version for processing requests later. This @@ -170,7 +171,7 @@ open_imb(void) if (hDevice1 != 0) { return 1; } - lprintf(LOG_DEBUG, "%s: opening the driver", __FUNCTION__); + lprintf(LOG_DEBUG, "%s: opening the driver", __func__); /* printf("open_imb: " "IOCTL_IMB_SEND_MESSAGE =%x \n" "IOCTL_IMB_GET_ASYNC_MSG=%x \n" "IOCTL_IMB_MAP_MEMORY = %x \n" "IOCTL_IMB_UNMAP_MEMORY= %x \n" @@ -192,7 +193,7 @@ open_imb(void) if (fDriverTyp != 0) { /* not 1st time */ sprintf(buf,"%s %s: open(%s) failed", - __FILE__, __FUNCTION__, IMB_DEVICE); + __FILE__, __func__, IMB_DEVICE); perror(buf); } return 0; @@ -212,14 +213,14 @@ open_imb(void) requestData.data = NULL; requestData.dataLength = 0; respLength = 16; - lprintf(LOG_DEBUG, "%s: opened driver, getting IPMI version", __FUNCTION__); + lprintf(LOG_DEBUG, "%s: opened driver, getting IPMI version", __func__); if (((my_ret_code = SendTimedImbpRequest(&requestData, (DWORD)400, respBuffer, (int *)&respLength, &completionCode)) != ACCESN_OK) || (completionCode != 0)) { printf("%s: SendTimedImbpRequest error. Ret = %d CC = 0x%X\n", - __FUNCTION__, my_ret_code, completionCode); + __func__, my_ret_code, completionCode); close(hDevice1); hDevice1 = 0; return 0; @@ -233,7 +234,7 @@ open_imb(void) IpmiVersion = IPMI_10_VERSION; } } - lprintf(LOG_DEBUG, "%s: IPMI version 0x%x", __FUNCTION__, + lprintf(LOG_DEBUG, "%s: IPMI version 0x%x", __func__, IpmiVersion); return 1; } /* end open_imb() */ @@ -281,11 +282,11 @@ ipmi_close_ia(void) * @lpcbBytesReturned, address of actual bytes of output * @lpoOverlapped address of overlapped struct * - * returns - FALSE for fail and TRUE for success. Same as standarad NTOS call as + * returns - FALSE for fail and TRUE for success. Same as standard NTOS call as * it also sets Ntstatus.status. */ static BOOL -DeviceIoControl(HANDLE dummey_hDevice, DWORD dwIoControlCode, LPVOID +DeviceIoControl(HANDLE __UNUSED__(dummey_hDevice), DWORD dwIoControlCode, LPVOID lpvInBuffer, DWORD cbInBuffer, LPVOID lpvOutBuffer, DWORD cbOutBuffer, LPDWORD lpcbBytesReturned, LPOVERLAPPED lpoOverlapped) @@ -298,7 +299,7 @@ DeviceIoControl(HANDLE dummey_hDevice, DWORD dwIoControlCode, LPVOID if (rc == 0) { return FALSE; } - lprintf(LOG_DEBUG, "%s: ioctl cmd = 0x%lx", __FUNCTION__, + lprintf(LOG_DEBUG, "%s: ioctl cmd = 0x%lx", __func__, dwIoControlCode); lprintf(LOG_DEBUG, "cbInBuffer %d cbOutBuffer %d", cbInBuffer, cbOutBuffer); @@ -312,23 +313,23 @@ DeviceIoControl(HANDLE dummey_hDevice, DWORD dwIoControlCode, LPVOID s.cbOutBuffer = cbOutBuffer; s.lpcbBytesReturned = lpcbBytesReturned; s.lpoOverlapped = lpoOverlapped; - /* dummy place holder. Linux IMB driver doesnt return status or info + /* dummy place holder. Linux IMB driver doesn't return status or info * via it */ s.ntstatus = (LPVOID)&NTstatus; if ((ioctl_status = ioctl(hDevice1, dwIoControlCode,&s)) < 0) { lprintf(LOG_DEBUG, "%s %s: ioctl cmd = 0x%x failed", - __FILE__, __FUNCTION__, dwIoControlCode); + __FILE__, __func__, dwIoControlCode); return FALSE; } lprintf(LOG_DEBUG, "%s: ioctl_status %d bytes returned = %d", - __FUNCTION__, ioctl_status, *lpcbBytesReturned); + __func__, ioctl_status, *lpcbBytesReturned); if (ioctl_status == STATUS_SUCCESS) { - lprintf(LOG_DEBUG, "%s returning true", __FUNCTION__); + lprintf(LOG_DEBUG, "%s returning true", __func__); return (TRUE); } else { - lprintf(LOG_DEBUG, "%s returning false", __FUNCTION__); + lprintf(LOG_DEBUG, "%s returning false", __func__); return (FALSE); } } @@ -341,12 +342,12 @@ StartAsyncMesgPoll() DWORD retLength; BOOL status; lprintf(LOG_DEBUG, "%s: DeviceIoControl cmd = %x", - __FUNCTION__, IOCTL_IMB_POLL_ASYNC); + __func__, IOCTL_IMB_POLL_ASYNC); status = DeviceIoControl(hDevice, IOCTL_IMB_POLL_ASYNC, NULL, 0, NULL, 0, &retLength, 0); - lprintf(LOG_DEBUG, "%s: DeviceIoControl status = %d", __FUNCTION__, + lprintf(LOG_DEBUG, "%s: DeviceIoControl status = %d", __func__, status); if (status == TRUE) { return ACCESN_OK; @@ -407,7 +408,7 @@ SendTimedI2cRequest(I2CREQUESTDATA *reqPtr, int timeOut, BYTE *respDataPtr, status = DeviceIoControl(hDevice, IOCTL_IMB_SEND_MESSAGE, requestData, sizeof(requestData), &responseData, sizeof(responseData), &respLength, NULL); - lprintf(LOG_DEBUG, "%s: DeviceIoControl status = %d", __FUNCTION__, + lprintf(LOG_DEBUG, "%s: DeviceIoControl status = %d", __func__, status); if (status != TRUE) { DWORD error; @@ -434,7 +435,7 @@ SendTimedI2cRequest(I2CREQUESTDATA *reqPtr, int timeOut, BYTE *respDataPtr, * @responseDataLen * @timeOut - how long to wait, in mSec units * - * retruns - OK else error status code + * returns - OK else error status code */ ACCESN_STATUS SendTimedEmpMessageResponse (ImbPacket *ptr, char *responseDataBuf, @@ -498,7 +499,7 @@ SendTimedEmpMessageResponse (ImbPacket *ptr, char *responseDataBuf, status = DeviceIoControl(hDevice, IOCTL_IMB_SEND_MESSAGE, requestData, sizeof(requestData), responseData, sizeof(responseData), &respLength, NULL); - lprintf(LOG_DEBUG, "%s: DeviceIoControl status = %d", __FUNCTION__, + lprintf(LOG_DEBUG, "%s: DeviceIoControl status = %d", __func__, status); if ((status != TRUE) || (respLength != 1) || (responseData[0] != 0)) { return ACCESN_ERROR; @@ -514,7 +515,7 @@ SendTimedEmpMessageResponse (ImbPacket *ptr, char *responseDataBuf, * @timeOut - how long to wait, in mSec units * @sessionHandle - This is introduced in IPMI1.5,this is required to be sent in * sendd message command as a parameter, which is then used by BMC - * to identify the correct DPC session to send the mesage to. + * to identify the correct DPC session to send the message to. * @channelNumber - There are 3 different channels on which DPC communication * goes on: * * Emp - 1 @@ -591,7 +592,7 @@ SendTimedEmpMessageResponse_Ex (ImbPacket *ptr, char *responseDataBuf, int req->req.data[i++] = ((ptr->seqLn & 0xfc) | (ptr->nfLn & 0x3)); /* The next byte is the command like get software ID(00). */ req->req.data[i++] = ptr->cmd; - /* after the cmd the data, which is sent by DPC & is retrived using the + /* after the cmd the data, which is sent by DPC & is retrieved using the * get message earlier is sent back to DPC. */ for (j = 0; j < responseDataLen; ++j, ++i) { @@ -626,7 +627,7 @@ SendTimedEmpMessageResponse_Ex (ImbPacket *ptr, char *responseDataBuf, int sizeof(requestData), responseData, sizeof(responseData), &respLength, NULL); - lprintf(LOG_DEBUG, "%s: DeviceIoControl status = %d", __FUNCTION__, + lprintf(LOG_DEBUG, "%s: DeviceIoControl status = %d", __func__, status); if ((status != TRUE) || (respLength != 1) || (responseData[0] != 0)) { return ACCESN_ERROR; @@ -711,7 +712,7 @@ SendTimedLanMessageResponse(ImbPacket *ptr, char *responseDataBuf, sizeof(requestData), responseData, sizeof(responseData), &respLength, NULL); - lprintf(LOG_DEBUG, "%s: DeviceIoControl status = %d", __FUNCTION__, + lprintf(LOG_DEBUG, "%s: DeviceIoControl status = %d", __func__, status); if ((status != TRUE) || (respLength != 1) || (responseData[0] != 0)) { return ACCESN_ERROR; @@ -728,7 +729,7 @@ SendTimedLanMessageResponse(ImbPacket *ptr, char *responseDataBuf, * @timeOut - how long to wait, in mSec units * @sessionHandle - This is introduced in IPMI1.5,this is required to be sent in * send message command as a parameter,which is then used by BMC to identify the - * correct DPC session to send the mesage to. + * correct DPC session to send the message to. * @channelNumber - There are 3 different channels on which DPC communication * goes on: * * Emp - 1 @@ -806,7 +807,7 @@ SendTimedLanMessageResponse_Ex(ImbPacket *ptr, char *responseDataBuf, int req->req.data[i++] = ((ptr->seqLn & 0xfc) | (ptr->nfLn & 0x3)); /* The next byte is the command like get software ID(00). */ req->req.data[i++] = ptr->cmd; - /* After the cmd the data ,which is sent by DPC & is retrived using the + /* After the cmd the data ,which is sent by DPC & is retrieved using the * get message earlier is sent back to DPC. */ for (j = 0; j < responseDataLen; ++j, ++i) { @@ -839,7 +840,7 @@ SendTimedLanMessageResponse_Ex(ImbPacket *ptr, char *responseDataBuf, int status = DeviceIoControl(hDevice, IOCTL_IMB_SEND_MESSAGE, requestData, sizeof(requestData), responseData, sizeof(responseData), &respLength, NULL); - lprintf(LOG_DEBUG, "%s: DeviceIoControl status = %d", __FUNCTION__, + lprintf(LOG_DEBUG, "%s: DeviceIoControl status = %d", __func__, status); if ((status != TRUE) || (respLength != 1) || (responseData[0] != 0)) { return ACCESN_ERROR; @@ -882,7 +883,7 @@ SendTimedImbpRequest(IMBPREQUESTDATA *reqPtr, int timeOut, BYTE *respDataPtr, /* convert to uSec units */ req->timeOut = timeOut * 1000; lprintf(LOG_DEBUG, "%s: rsSa 0x%x cmd 0x%x netFn 0x%x rsLun 0x%x", - __FUNCTION__, req->req.rsSa, req->req.cmd, + __func__, req->req.rsSa, req->req.cmd, req->req.netFn, req->req.rsLun); status = DeviceIoControl(hDevice, IOCTL_IMB_SEND_MESSAGE, requestData, @@ -890,11 +891,11 @@ SendTimedImbpRequest(IMBPREQUESTDATA *reqPtr, int timeOut, BYTE *respDataPtr, sizeof(responseData), &respLength, NULL); lprintf(LOG_DEBUG, "%s: DeviceIoControl returned status = %d", - __FUNCTION__, status); + __func__, status); #ifdef DBG_IPMI /* TODO */ printf("%s: rsSa %x cmd %x netFn %x lun %x, status=%d, cc=%x, rlen=%d\n", - __FUNCTION__, req->req.rsSa, req->req.cmd, + __func__, req->req.rsSa, req->req.cmd, req->req.netFn, req->req.rsLun, status, resp->cCode, respLength); #endif @@ -949,7 +950,7 @@ SendAsyncImbpRequest(IMBPREQUESTDATA *reqPtr, BYTE *seqNo) sizeof(requestData), &responseData, sizeof(responseData), &respLength, NULL); - lprintf(LOG_DEBUG, "%s: DeviceIoControl status = %d", __FUNCTION__, + lprintf(LOG_DEBUG, "%s: DeviceIoControl status = %d", __func__, status); if (status != TRUE) { DWORD error; @@ -979,82 +980,12 @@ ACCESN_STATUS GetAsyncImbpMessage (ImbPacket *msgPtr, DWORD *msgLen, DWORD timeOut, ImbAsyncSeq *seqNo, DWORD channelNumber) { - BOOL status; - BYTE responseData[MAX_ASYNC_RESP_SIZE]; - BYTE lun; - ImbAsyncResponse *resp = (ImbAsyncResponse *)responseData; - DWORD respLength = sizeof(responseData); - ImbAsyncRequest req; - - while (1) { - if ((msgPtr == NULL) || (msgLen == NULL) || ( seqNo == NULL)) { - return ACCESN_ERROR; - } - /* convert to uSec units */ - req.timeOut = timeOut * 1000; - req.lastSeq = *seqNo; - - status = DeviceIoControl(hDevice, IOCTL_IMB_GET_ASYNC_MSG, &req, - sizeof(req), &responseData, - sizeof(responseData), &respLength, NULL); - - lprintf(LOG_DEBUG, "%s: DeviceIoControl status = %d", - __FUNCTION__, status); - if (status != TRUE) { - DWORD error = GetLastError(); - /* handle "msg not available" specially. it is different - * from a random old error. - */ - switch (error) { - case IMB_MSG_NOT_AVAILABLE: - return ACCESN_END_OF_DATA; - break; - default: - return ACCESN_ERROR; - break; - } - } else if (respLength < MIN_ASYNC_RESP_SIZE) { - return ACCESN_ERROR; - } - respLength -= MIN_ASYNC_RESP_SIZE; - - if (*msgLen < respLength) { - return ACCESN_ERROR; - } - - /* same code as in NT section */ - if (IpmiVersion == IPMI_09_VERSION) { - switch (channelNumber) { - case IPMB_CHANNEL: - lun = IPMB_LUN; - break; - case EMP_CHANNEL: - lun = EMP_LUN; - break; - default: - lun = RESERVED_LUN; - break; - } - if ((lun == RESERVED_LUN) - || (lun != ((((ImbPacket *)(resp->data))->nfLn) & 0x3 ))) { - *seqNo = resp->thisSeq; - continue; - } - memcpy(msgPtr, resp->data, respLength); - *msgLen = respLength; - } else { - /* it is version 1.0 or better */ - if (resp->data[0] != (BYTE)channelNumber) { - *seqNo = resp->thisSeq; - continue; - } - memcpy(msgPtr, &(resp->data[1]), (respLength - 1)); - *msgLen = respLength - 1; - } - /* give the caller his sequence number */ - *seqNo = resp->thisSeq; - return ACCESN_OK; - } + /* This function does exactly the same as GetAsuncImbpMessage_Ex(), + * but doesn't return session handle and privilege + */ + return GetAsyncImbpMessage_Ex(msgPtr, msgLen, timeOut, + seqNo, channelNumber, + NULL, NULL); } /* GetAsyncImbpMessage_Ex - gets the next available async message with a message @@ -1084,7 +1015,7 @@ GetAsyncImbpMessage_Ex(ImbPacket *msgPtr, DWORD *msgLen, DWORD timeOut, ImbAsyncRequest req; while (1) { - if ((msgPtr == NULL) || (msgLen == NULL) || ( seqNo == NULL)) { + if (!msgPtr || !msgLen || !seqNo) { return ACCESN_ERROR; } @@ -1096,7 +1027,7 @@ GetAsyncImbpMessage_Ex(ImbPacket *msgPtr, DWORD *msgLen, DWORD timeOut, sizeof(responseData), &respLength, NULL); lprintf(LOG_DEBUG, "%s: DeviceIoControl status = %d", - __FUNCTION__, status); + __func__, status); if (status != TRUE) { DWORD error = GetLastError(); /* handle "msg not available" specially. it is @@ -1110,12 +1041,12 @@ GetAsyncImbpMessage_Ex(ImbPacket *msgPtr, DWORD *msgLen, DWORD timeOut, return ACCESN_ERROR; break; } - } - if (respLength < MIN_ASYNC_RESP_SIZE) { + } else if (respLength < MIN_ASYNC_RESP_SIZE) { return ACCESN_ERROR; } respLength -= MIN_ASYNC_RESP_SIZE; + if (*msgLen < respLength) { return ACCESN_ERROR; } @@ -1143,26 +1074,26 @@ GetAsyncImbpMessage_Ex(ImbPacket *msgPtr, DWORD *msgLen, DWORD timeOut, memcpy(msgPtr, resp->data, respLength); *msgLen = respLength; } else { - if ((sessionHandle ==NULL) || (privilege ==NULL)) { - return ACCESN_ERROR; + /* it is version 1.0 or better */ + if ((resp->data[0] & 0x0f) != (BYTE)channelNumber) { + *seqNo = resp->thisSeq; + continue; } /* With the new IPMI version the get message command * returns the channel number along with the - * privileges.The 1st 4 bits of the second byte of the + * privileges. The 1st 4 bits of the second byte of the * response data for get message command represent the * channel number & the last 4 bits are the privileges. */ - *privilege = (resp->data[0] & 0xf0)>> 4; - if ((resp->data[0] & 0x0f) != (BYTE)channelNumber) { - *seqNo = resp->thisSeq; - continue; + if (sessionHandle && privilege) { + *privilege = (resp->data[0] & 0xf0) >> 4; + /* The get message command according to IPMI 1.5 spec + * now even returns the session handle. This is required + * to be captured as it is required as request data for + * send message command. + */ + *sessionHandle = resp->data[1]; } - /* The get message command according to IPMI 1.5 spec - * now even returns the session handle.This is required - * to be captured as it is required as request data for - * send message command. - */ - *sessionHandle = resp->data[1]; memcpy(msgPtr, &(resp->data[2]), (respLength - 1)); *msgLen = respLength - 1; } @@ -1194,7 +1125,7 @@ IsAsyncMessageAvailable(unsigned int eventId) status = DeviceIoControl(hDevice, IOCTL_IMB_CHECK_EVENT, &AsyncEventHandle, sizeof(HANDLE), &dummy, sizeof(int), (LPDWORD)&respLength, NULL); - lprintf(LOG_DEBUG, "%s: DeviceIoControl status = %d", __FUNCTION__, + lprintf(LOG_DEBUG, "%s: DeviceIoControl status = %d", __func__, status); if (status != TRUE) { return ACCESN_ERROR; @@ -1220,13 +1151,13 @@ RegisterForImbAsyncMessageNotification(unsigned int *handleId) DWORD respLength ; int dummy; /*allow only one app to register */ - if ((handleId == NULL ) || (AsyncEventHandle)) { + if (!handleId || AsyncEventHandle) { return ACCESN_ERROR; } status = DeviceIoControl(hDevice, IOCTL_IMB_REGISTER_ASYNC_OBJ, &dummy, sizeof(int), &AsyncEventHandle, (DWORD)sizeof(HANDLE), (LPDWORD)&respLength, NULL); - lprintf(LOG_DEBUG, "%s: DeviceIoControl status = %d", __FUNCTION__, + lprintf(LOG_DEBUG, "%s: DeviceIoControl status = %d", __func__, status); if ((respLength != sizeof(int)) || (status != TRUE)) { return ACCESN_ERROR; @@ -1265,7 +1196,7 @@ UnRegisterForImbAsyncMessageNotification(unsigned int handleId, int iFlag) status = DeviceIoControl(hDevice, IOCTL_IMB_DEREGISTER_ASYNC_OBJ, &AsyncEventHandle, (DWORD)sizeof(HANDLE ), &dummy, (DWORD)sizeof(int), (LPDWORD)&respLength, NULL ); - lprintf(LOG_DEBUG, "%s: DeviceIoControl status = %d", __FUNCTION__, + lprintf(LOG_DEBUG, "%s: DeviceIoControl status = %d", __func__, status); if (status != TRUE) { return ACCESN_ERROR; @@ -1295,7 +1226,7 @@ SetShutDownCode(int delayTime, int code) cmd.delayTime = delayTime; status = DeviceIoControl(hDevice, IOCTL_IMB_SHUTDOWN_CODE, &cmd, sizeof(cmd), NULL, 0, &retLength, NULL); - lprintf(LOG_DEBUG, "%s: DeviceIoControl status = %d", __FUNCTION__, + lprintf(LOG_DEBUG, "%s: DeviceIoControl status = %d", __func__, status); if (status == TRUE) { return ACCESN_OK; @@ -1402,7 +1333,7 @@ MapPhysicalMemory(int startAddress, int addressLength, int *virtualAddress) if ((fd = open("/dev/mem", O_RDONLY)) < 0) { char buf[128]; sprintf(buf,"%s %s: open(%s) failed", - __FILE__, __FUNCTION__, IMB_DEVICE); + __FILE__, __func__, IMB_DEVICE); perror(buf); return ACCESN_ERROR; } @@ -1413,12 +1344,12 @@ MapPhysicalMemory(int startAddress, int addressLength, int *virtualAddress) if ((startvAddress = mmap(0, length, PROT_READ, MAP_SHARED, fd, startpAddress)) == MAP_FAILED) { char buf[128]; - sprintf(buf, "%s %s: mmap failed", __FILE__, __FUNCTION__); + sprintf(buf, "%s %s: mmap failed", __FILE__, __func__); perror(buf); close(fd); return ACCESN_ERROR; } - lprintf(LOG_DEBUG, "%s: mmap of 0x%x success", __FUNCTION__, + lprintf(LOG_DEBUG, "%s: mmap of 0x%x success", __func__, startpAddress); #ifdef LINUX_DEBUG_MAX for (int i = 0; i < length; i++) { @@ -1451,15 +1382,15 @@ UnmapPhysicalMemory(int virtualAddress, int Length) diff = ((unsigned int)virtualAddress) % pagesize; virtualAddress -= diff; Length += diff; - lprintf(LOG_DEBUG, "%s: calling munmap(0x%x,%d)", __FUNCTION__, + lprintf(LOG_DEBUG, "%s: calling munmap(0x%x,%d)", __func__, virtualAddress,Length); if (munmap(&virtualAddress, Length) != 0) { char buf[128]; - sprintf(buf, "%s %s: munmap failed", __FILE__, __FUNCTION__); + sprintf(buf, "%s %s: munmap failed", __FILE__, __func__); perror(buf); return ACCESN_ERROR; } - lprintf(LOG_DEBUG, "%s: munmap(0x%x,%d) success", __FUNCTION__, + lprintf(LOG_DEBUG, "%s: munmap(0x%x,%d) success", __func__, virtualAddress, Length); return ACCESN_OK; } diff --git a/src/plugins/imb/imbapi.h b/src/plugins/imb/imbapi.h index 6ba4121..67fdc84 100644 --- a/src/plugins/imb/imbapi.h +++ b/src/plugins/imb/imbapi.h @@ -33,8 +33,14 @@ ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. *----------------------------------------------------------------------*/ + +#pragma once + #ifndef _WINDEFS_H #define _WINDEFS_H + +#include <stddef.h> + #ifndef FALSE #define FALSE 0 #endif @@ -261,7 +267,7 @@ typedef struct { #define SD_POWER_OFF 2 #pragma pack(1) /* - * This is the generic IMB packet format, the final checksum cant be + * This is the generic IMB packet format, the final checksum can't be * represented in this structure and will show up as the last data byte */ typedef struct { @@ -318,7 +324,7 @@ typedef struct { } ImbRequest; typedef struct { DWORD flags; /* request flags*/ -#define NO_RESPONSE_EXPECTED 0x01 /*dont wait around for an IMB response*/ +#define NO_RESPONSE_EXPECTED 0x01 /*don't wait around for an IMB response*/ DWORD timeOut; /* in uSec units*/ ImbRequest req; /* message buffer*/ } ImbRequestBuffer; @@ -541,7 +547,7 @@ typedef struct */ #define ASYNC_SEQ_START 0 /* - * This is the generic IMB packet format, the final checksum cant be + * This is the generic IMB packet format, the final checksum can't be * represented in this structure and will show up as the last data byte */ /* diff --git a/src/plugins/ipmi_intf.c b/src/plugins/ipmi_intf.c index 9225a34..e424a64 100644 --- a/src/plugins/ipmi_intf.c +++ b/src/plugins/ipmi_intf.c @@ -29,9 +29,6 @@ * LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE, * EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. */ -#define _XOPEN_SOURCE 700 -#define _GNU_SOURCE 1 -#define _DARWIN_C_SOURCE 1 #include <stdio.h> #include <stdlib.h> @@ -89,6 +86,9 @@ extern struct ipmi_intf ipmi_dummy_intf; #ifdef IPMI_INTF_USB extern struct ipmi_intf ipmi_usb_intf; #endif +#ifdef IPMI_INTF_DBUS +extern struct ipmi_intf ipmi_dbus_intf; +#endif struct ipmi_intf * ipmi_intf_table[] = { #ifdef IPMI_INTF_OPEN @@ -122,9 +122,32 @@ struct ipmi_intf * ipmi_intf_table[] = { #ifdef IPMI_INTF_USB &ipmi_usb_intf, #endif +#ifdef IPMI_INTF_DBUS + &ipmi_dbus_intf, +#endif NULL }; +/* get_default_interface - return the interface that was chosen by configure + * + * returns a valid interface pointer + */ +static struct ipmi_intf *get_default_interface(void) +{ + static const char *default_intf_name = DEFAULT_INTF; + struct ipmi_intf ** intf; + for (intf = ipmi_intf_table; intf && *intf; intf++) { + if (!strcmp(default_intf_name, (*intf)->name)) { + return *intf; + } + } + /* code should never reach this because the configure script checks + * to see that the default interface is actually enabled, but we have + * to return some valid value here, so the first entry works + */ + return ipmi_intf_table[0]; +} + /* ipmi_intf_print - Print list of interfaces * * no meaningful return code @@ -132,20 +155,20 @@ struct ipmi_intf * ipmi_intf_table[] = { void ipmi_intf_print(struct ipmi_intf_support * intflist) { struct ipmi_intf ** intf; + struct ipmi_intf *def_intf; struct ipmi_intf_support * sup; - int def = 1; int found; + def_intf = get_default_interface(); lprintf(LOG_NOTICE, "Interfaces:"); for (intf = ipmi_intf_table; intf && *intf; intf++) { - if (intflist != NULL) { + if (intflist) { found = 0; - for (sup=intflist; sup->name != NULL; sup++) { - if (strncmp(sup->name, (*intf)->name, strlen(sup->name)) == 0 && - strncmp(sup->name, (*intf)->name, strlen((*intf)->name)) == 0 && - sup->supported == 1) + for (sup=intflist; sup->name; sup++) { + if (!strcmp(sup->name, (*intf)->name) + && sup->supported) found = 1; } if (found == 0) @@ -154,8 +177,7 @@ void ipmi_intf_print(struct ipmi_intf_support * intflist) lprintf(LOG_NOTICE, "\t%-12s %s %s", (*intf)->name, (*intf)->desc, - def ? "[default]" : ""); - def = 0; + def_intf == (*intf) ? "[default]" : ""); } lprintf(LOG_NOTICE, ""); } @@ -173,9 +195,9 @@ struct ipmi_intf * ipmi_intf_load(char * name) struct ipmi_intf ** intf; struct ipmi_intf * i; - if (name == NULL) { - i = ipmi_intf_table[0]; - if (i->setup != NULL && (i->setup(i) < 0)) { + if (!name) { + i = get_default_interface(); + if (i->setup && (i->setup(i) < 0)) { lprintf(LOG_ERR, "Unable to setup " "interface %s", name); return NULL; @@ -184,11 +206,12 @@ struct ipmi_intf * ipmi_intf_load(char * name) } for (intf = ipmi_intf_table; - ((intf != NULL) && (*intf != NULL)); - intf++) { + intf && *intf; + intf++) + { i = *intf; - if (strncmp(name, i->name, strlen(name)) == 0) { - if (i->setup != NULL && (i->setup(i) < 0)) { + if (!strcmp(name, i->name)) { + if (i->setup && (i->setup(i) < 0)) { lprintf(LOG_ERR, "Unable to setup " "interface %s", name); return NULL; @@ -203,11 +226,11 @@ struct ipmi_intf * ipmi_intf_load(char * name) void ipmi_intf_session_set_hostname(struct ipmi_intf * intf, char * hostname) { - if (intf->ssn_params.hostname != NULL) { + if (intf->ssn_params.hostname) { free(intf->ssn_params.hostname); intf->ssn_params.hostname = NULL; } - if (hostname == NULL) { + if (!hostname) { return; } intf->ssn_params.hostname = strdup(hostname); @@ -218,7 +241,7 @@ ipmi_intf_session_set_username(struct ipmi_intf * intf, char * username) { memset(intf->ssn_params.username, 0, 17); - if (username == NULL) + if (!username) return; memcpy(intf->ssn_params.username, username, __min(strlen(username), 16)); @@ -229,7 +252,7 @@ ipmi_intf_session_set_password(struct ipmi_intf * intf, char * password) { memset(intf->ssn_params.authcode_set, 0, IPMI_AUTHCODE_BUFFER_SIZE); - if (password == NULL) { + if (!password) { intf->ssn_params.password = 0; return; } @@ -251,11 +274,14 @@ ipmi_intf_session_set_lookupbit(struct ipmi_intf * intf, uint8_t lookupbit) intf->ssn_params.lookupbit = lookupbit; } +#ifdef IPMI_INTF_LANPLUS void -ipmi_intf_session_set_cipher_suite_id(struct ipmi_intf * intf, uint8_t cipher_suite_id) +ipmi_intf_session_set_cipher_suite_id(struct ipmi_intf * intf, + enum cipher_suite_ids cipher_suite_id) { intf->ssn_params.cipher_suite_id = cipher_suite_id; } +#endif /* IPMI_INTF_LANPLUS */ void ipmi_intf_session_set_sol_escape_char(struct ipmi_intf * intf, char sol_escape_char) @@ -302,7 +328,7 @@ ipmi_intf_session_set_retry(struct ipmi_intf * intf, int retry) void ipmi_intf_session_cleanup(struct ipmi_intf *intf) { - if (intf->session == NULL) { + if (!intf->session) { return; } @@ -313,7 +339,7 @@ ipmi_intf_session_cleanup(struct ipmi_intf *intf) void ipmi_cleanup(struct ipmi_intf * intf) { - ipmi_sdr_list_empty(intf); + ipmi_sdr_list_empty(); ipmi_intf_session_set_hostname(intf, NULL); } @@ -334,7 +360,7 @@ ipmi_intf_socket_connect(struct ipmi_intf * intf) params = &intf->ssn_params; - if (params->hostname == NULL || strlen((const char *)params->hostname) == 0) { + if (!params->hostname || strlen((const char *)params->hostname) == 0) { lprintf(LOG_ERR, "No hostname specified!"); return -1; } @@ -362,7 +388,7 @@ ipmi_intf_socket_connect(struct ipmi_intf * intf) * and) try the next address. */ - for (rp = rp0; rp != NULL; rp = rp->ai_next) { + for (rp = rp0; rp; rp = rp->ai_next) { /* We are only interested in IPv4 and IPv6 */ if ((rp->ai_family != AF_INET6) && (rp->ai_family != AF_INET)) { continue; @@ -406,8 +432,8 @@ ipmi_intf_socket_connect(struct ipmi_intf * intf) break; } - for (ifa = ifaddrs; ifa != NULL; ifa = ifa->ifa_next) { - if (ifa->ifa_addr == NULL) { + for (ifa = ifaddrs; ifa; ifa = ifa->ifa_next) { + if (!ifa->ifa_addr) { continue; } @@ -424,7 +450,7 @@ ipmi_intf_socket_connect(struct ipmi_intf * intf) len = sizeof(struct sockaddr_in6); if ( getnameinfo((struct sockaddr *)tmp6, len, hbuf, sizeof(hbuf), NULL, 0, NI_NUMERICHOST) == 0) { lprintf(LOG_DEBUG, "Testing %s interface address: %s scope=%d", - ifa->ifa_name != NULL ? ifa->ifa_name : "???", + ifa->ifa_name ? ifa->ifa_name : "???", hbuf, tmp6->sin6_scope_id); } @@ -476,13 +502,14 @@ uint16_t ipmi_intf_get_max_request_data_size(struct ipmi_intf * intf) { int16_t size; + uint8_t bridging_level = ipmi_intf_get_bridging_level(intf); size = intf->max_request_data_size; /* check if request size is not specified */ if (!size) { /* - * The IPMB standard overall message length for ‘non -bridging’ + * The IPMB standard overall message length for non-bridging * messages is specified as 32 bytes, maximum, including slave * address. This sets the upper limit for typical IPMI messages. * With the exception of messages used for bridging messages to @@ -495,14 +522,14 @@ ipmi_intf_get_max_request_data_size(struct ipmi_intf * intf) size = IPMI_DEFAULT_PAYLOAD_SIZE; /* check if message is forwarded */ - if (intf->target_addr && intf->target_addr != intf->my_addr) { + if (bridging_level) { /* add Send Message request size */ size += 8; } } /* check if message is forwarded */ - if (intf->target_addr && intf->target_addr != intf->my_addr) { + if (bridging_level) { /* subtract send message request size */ size -= 8; @@ -515,7 +542,7 @@ ipmi_intf_get_max_request_data_size(struct ipmi_intf * intf) } /* check for double bridging */ - if (intf->transit_addr && intf->transit_addr != intf->target_addr) { + if (bridging_level == 2) { /* subtract inner send message request size */ size -= 8; } @@ -533,13 +560,14 @@ uint16_t ipmi_intf_get_max_response_data_size(struct ipmi_intf * intf) { int16_t size; + uint8_t bridging_level = ipmi_intf_get_bridging_level(intf); size = intf->max_response_data_size; /* check if response size is not specified */ if (!size) { /* - * The IPMB standard overall message length for ‘non -bridging’ + * The IPMB standard overall message length for non-bridging * messages is specified as 32 bytes, maximum, including slave * address. This sets the upper limit for typical IPMI messages. * With the exception of messages used for bridging messages to @@ -552,14 +580,14 @@ ipmi_intf_get_max_response_data_size(struct ipmi_intf * intf) size = IPMI_DEFAULT_PAYLOAD_SIZE; /* response length with subtracted header and checksum byte */ /* check if message is forwarded */ - if (intf->target_addr && intf->target_addr != intf->my_addr) { + if (bridging_level) { /* add Send Message header size */ size += 7; } } /* check if message is forwarded */ - if (intf->target_addr && intf->target_addr != intf->my_addr) { + if (bridging_level) { /* * Some IPMI controllers like PICMG AMC Carriers embed responses * to the forwarded messages into the Send Message response. @@ -577,7 +605,7 @@ ipmi_intf_get_max_response_data_size(struct ipmi_intf * intf) } /* check for double bridging */ - if (intf->transit_addr && intf->transit_addr != intf->target_addr) { + if (bridging_level == 2) { /* subtract inner send message header size */ size -= 8; } @@ -591,6 +619,25 @@ ipmi_intf_get_max_response_data_size(struct ipmi_intf * intf) return size; } +uint8_t +ipmi_intf_get_bridging_level(const struct ipmi_intf *intf) +{ + uint8_t bridging_level; + + if (intf->target_addr && (intf->target_addr != intf->my_addr)) { + if (intf->transit_addr && + (intf->transit_addr != intf->target_addr || intf->transit_channel != intf->target_channel)) { + bridging_level = 2; + } else { + bridging_level = 1; + } + } else { + bridging_level = 0; + } + + return bridging_level; +} + void ipmi_intf_set_max_request_data_size(struct ipmi_intf * intf, uint16_t size) { diff --git a/src/plugins/lan/Makefile.in b/src/plugins/lan/Makefile.in deleted file mode 100644 index 2abda0d..0000000 --- a/src/plugins/lan/Makefile.in +++ /dev/null @@ -1,639 +0,0 @@ -# Makefile.in generated by automake 1.14.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994-2013 Free Software Foundation, Inc. - -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -# Copyright (c) 2003 Sun Microsystems, Inc. All Rights Reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# Redistribution of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# -# Redistribution in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in the -# documentation and/or other materials provided with the distribution. -# -# Neither the name of Sun Microsystems, Inc. or the names of -# contributors may be used to endorse or promote products derived -# from this software without specific prior written permission. -# -# This software is provided "AS IS," without a warranty of any kind. -# ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, -# INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A -# PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY EXCLUDED. -# SUN MICROSYSTEMS, INC. ("SUN") AND ITS LICENSORS SHALL NOT BE LIABLE -# FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING -# OR DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES. IN NO EVENT WILL -# SUN OR ITS LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA, -# OR FOR DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR -# PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF -# LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE, -# EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. - -VPATH = @srcdir@ -am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' -am__make_running_with_option = \ - case $${target_option-} in \ - ?) ;; \ - *) echo "am__make_running_with_option: internal error: invalid" \ - "target option '$${target_option-}' specified" >&2; \ - exit 1;; \ - esac; \ - has_opt=no; \ - sane_makeflags=$$MAKEFLAGS; \ - if $(am__is_gnu_make); then \ - sane_makeflags=$$MFLAGS; \ - else \ - case $$MAKEFLAGS in \ - *\\[\ \ ]*) \ - bs=\\; \ - sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ - | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ - esac; \ - fi; \ - skip_next=no; \ - strip_trailopt () \ - { \ - flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ - }; \ - for flg in $$sane_makeflags; do \ - test $$skip_next = yes && { skip_next=no; continue; }; \ - case $$flg in \ - *=*|--*) continue;; \ - -*I) strip_trailopt 'I'; skip_next=yes;; \ - -*I?*) strip_trailopt 'I';; \ - -*O) strip_trailopt 'O'; skip_next=yes;; \ - -*O?*) strip_trailopt 'O';; \ - -*l) strip_trailopt 'l'; skip_next=yes;; \ - -*l?*) strip_trailopt 'l';; \ - -[dEDm]) skip_next=yes;; \ - -[JT]) skip_next=yes;; \ - esac; \ - case $$flg in \ - *$$target_option*) has_opt=yes; break;; \ - esac; \ - done; \ - test $$has_opt = yes -am__make_dryrun = (target_option=n; $(am__make_running_with_option)) -am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -target_triplet = @target@ -subdir = src/plugins/lan -DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ - $(top_srcdir)/depcomp -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(install_sh) -d -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -LTLIBRARIES = $(noinst_LTLIBRARIES) -libintf_lan_la_DEPENDENCIES = $(top_builddir)/lib/libipmitool.la -am_libintf_lan_la_OBJECTS = lan.lo auth.lo md5.lo -libintf_lan_la_OBJECTS = $(am_libintf_lan_la_OBJECTS) -AM_V_lt = $(am__v_lt_@AM_V@) -am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@) -am__v_lt_0 = --silent -am__v_lt_1 = -AM_V_P = $(am__v_P_@AM_V@) -am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) -am__v_P_0 = false -am__v_P_1 = : -AM_V_GEN = $(am__v_GEN_@AM_V@) -am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) -am__v_GEN_0 = @echo " GEN " $@; -am__v_GEN_1 = -AM_V_at = $(am__v_at_@AM_V@) -am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) -am__v_at_0 = @ -am__v_at_1 = -DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) -depcomp = $(SHELL) $(top_srcdir)/depcomp -am__depfiles_maybe = depfiles -am__mv = mv -f -COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ - $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ - $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \ - $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ - $(AM_CFLAGS) $(CFLAGS) -AM_V_CC = $(am__v_CC_@AM_V@) -am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@) -am__v_CC_0 = @echo " CC " $@; -am__v_CC_1 = -CCLD = $(CC) -LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ - $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ - $(AM_LDFLAGS) $(LDFLAGS) -o $@ -AM_V_CCLD = $(am__v_CCLD_@AM_V@) -am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@) -am__v_CCLD_0 = @echo " CCLD " $@; -am__v_CCLD_1 = -SOURCES = $(libintf_lan_la_SOURCES) -DIST_SOURCES = $(libintf_lan_la_SOURCES) -am__can_run_installinfo = \ - case $$AM_UPDATE_INFO_DIR in \ - n|no|NO) false;; \ - *) (install-info --version) >/dev/null 2>&1;; \ - esac -am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) -# Read a list of newline-separated strings from the standard input, -# and print each of them once, without duplicates. Input order is -# *not* preserved. -am__uniquify_input = $(AWK) '\ - BEGIN { nonempty = 0; } \ - { items[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in items) print i; }; } \ -' -# Make sure the list of sources is unique. This is necessary because, -# e.g., the same source file might be shared among _SOURCES variables -# for different programs/libraries. -am__define_uniq_tagged_files = \ - list='$(am__tagged_files)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | $(am__uniquify_input)` -ETAGS = etags -CTAGS = ctags -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -ARCH = @ARCH@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BASEDIR = @BASEDIR@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DISTRO = @DISTRO@ -DLLTOOL = @DLLTOOL@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FGREP = @FGREP@ -GREP = @GREP@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INTF_BMC = @INTF_BMC@ -INTF_BMC_LIB = @INTF_BMC_LIB@ -INTF_DUMMY = @INTF_DUMMY@ -INTF_DUMMY_LIB = @INTF_DUMMY_LIB@ -INTF_FREE = @INTF_FREE@ -INTF_FREE_LIB = @INTF_FREE_LIB@ -INTF_IMB = @INTF_IMB@ -INTF_IMB_LIB = @INTF_IMB_LIB@ -INTF_LAN = @INTF_LAN@ -INTF_LANPLUS = @INTF_LANPLUS@ -INTF_LANPLUS_LIB = @INTF_LANPLUS_LIB@ -INTF_LAN_LIB = @INTF_LAN_LIB@ -INTF_LIPMI = @INTF_LIPMI@ -INTF_LIPMI_LIB = @INTF_LIPMI_LIB@ -INTF_OPEN = @INTF_OPEN@ -INTF_OPEN_LIB = @INTF_OPEN_LIB@ -INTF_SERIAL = @INTF_SERIAL@ -INTF_SERIAL_LIB = @INTF_SERIAL_LIB@ -INTF_USB = @INTF_USB@ -INTF_USB_LIB = @INTF_USB_LIB@ -IPMITOOL_INTF_LIB = @IPMITOOL_INTF_LIB@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ -MKDIR_P = @MKDIR_P@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OS = @OS@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -POW_LIB = @POW_LIB@ -PSTAMP = @PSTAMP@ -RANLIB = @RANLIB@ -RPMBUILD = @RPMBUILD@ -RPM_RELEASE = @RPM_RELEASE@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -VERSION = @VERSION@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_configure_args = @ac_configure_args@ -ac_ct_AR = @ac_ct_AR@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target = @target@ -target_alias = @target_alias@ -target_cpu = @target_cpu@ -target_os = @target_os@ -target_vendor = @target_vendor@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -MAINTAINERCLEANFILES = Makefile.in -AM_CPPFLAGS = -I$(top_srcdir)/include -EXTRA_LTLIBRARIES = libintf_lan.la -noinst_LTLIBRARIES = @INTF_LAN_LIB@ -libintf_lan_la_LIBADD = $(top_builddir)/lib/libipmitool.la -libintf_lan_la_SOURCES = lan.c lan.h asf.h rmcp.h auth.c auth.h md5.c md5.h -all: all-am - -.SUFFIXES: -.SUFFIXES: .c .lo .o .obj -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/plugins/lan/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign src/plugins/lan/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): - -clean-noinstLTLIBRARIES: - -test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES) - @list='$(noinst_LTLIBRARIES)'; \ - locs=`for p in $$list; do echo $$p; done | \ - sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \ - sort -u`; \ - test -z "$$locs" || { \ - echo rm -f $${locs}; \ - rm -f $${locs}; \ - } - -libintf_lan.la: $(libintf_lan_la_OBJECTS) $(libintf_lan_la_DEPENDENCIES) $(EXTRA_libintf_lan_la_DEPENDENCIES) - $(AM_V_CCLD)$(LINK) $(libintf_lan_la_OBJECTS) $(libintf_lan_la_LIBADD) $(LIBS) - -mostlyclean-compile: - -rm -f *.$(OBJEXT) - -distclean-compile: - -rm -f *.tab.c - -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/auth.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/lan.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/md5.Plo@am__quote@ - -.c.o: -@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $< - -.c.obj: -@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'` - -.c.lo: -@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $< - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs - -ID: $(am__tagged_files) - $(am__define_uniq_tagged_files); mkid -fID $$unique -tags: tags-am -TAGS: tags - -tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) - set x; \ - here=`pwd`; \ - $(am__define_uniq_tagged_files); \ - shift; \ - if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - if test $$# -gt 0; then \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - "$$@" $$unique; \ - else \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$unique; \ - fi; \ - fi -ctags: ctags-am - -CTAGS: ctags -ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) - $(am__define_uniq_tagged_files); \ - test -z "$(CTAGS_ARGS)$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && $(am__cd) $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) "$$here" -cscopelist: cscopelist-am - -cscopelist-am: $(am__tagged_files) - list='$(am__tagged_files)'; \ - case "$(srcdir)" in \ - [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ - *) sdir=$(subdir)/$(srcdir) ;; \ - esac; \ - for i in $$list; do \ - if test -f "$$i"; then \ - echo "$(subdir)/$$i"; \ - else \ - echo "$$sdir/$$i"; \ - fi; \ - done >> $(top_builddir)/cscope.files - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-am -all-am: Makefile $(LTLIBRARIES) -installdirs: -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - if test -z '$(STRIP)'; then \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - install; \ - else \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ - fi -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." - -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) -clean: clean-am - -clean-am: clean-generic clean-libtool clean-noinstLTLIBRARIES \ - mostlyclean-am - -distclean: distclean-am - -rm -rf ./$(DEPDIR) - -rm -f Makefile -distclean-am: clean-am distclean-compile distclean-generic \ - distclean-tags - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -rf ./$(DEPDIR) - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-compile mostlyclean-generic \ - mostlyclean-libtool - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: - -.MAKE: install-am install-strip - -.PHONY: CTAGS GTAGS TAGS all all-am check check-am clean clean-generic \ - clean-libtool clean-noinstLTLIBRARIES cscopelist-am ctags \ - ctags-am distclean distclean-compile distclean-generic \ - distclean-libtool distclean-tags distdir dvi dvi-am html \ - html-am info info-am install install-am install-data \ - install-data-am install-dvi install-dvi-am install-exec \ - install-exec-am install-html install-html-am install-info \ - install-info-am install-man install-pdf install-pdf-am \ - install-ps install-ps-am install-strip installcheck \ - installcheck-am installdirs maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-compile \ - mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ - tags tags-am uninstall uninstall-am - - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/src/plugins/lan/asf.h b/src/plugins/lan/asf.h index ab36d6f..eb1004f 100644 --- a/src/plugins/lan/asf.h +++ b/src/plugins/lan/asf.h @@ -30,8 +30,7 @@ * EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. */ -#ifndef IPMI_ASF_H -#define IPMI_ASF_H +#pragma once #include <ipmitool/helper.h> #include "lan.h" @@ -41,20 +40,6 @@ #define ASF_TYPE_PING 0x80 #define ASF_TYPE_PONG 0x40 -static const struct valstr asf_type_vals[] __attribute__((unused)) = { - { 0x10, "Reset" }, - { 0x11, "Power-up" }, - { 0x12, "Unconditional Power-down" }, - { 0x13, "Power Cycle" }, - { 0x40, "Presence Pong" }, - { 0x41, "Capabilities Response" }, - { 0x42, "System State Response" }, - { 0x80, "Presence Ping" }, - { 0x81, "Capabilities Request" }, - { 0x82, "System State Request" }, - { 0x00, NULL } -}; - /* ASF message header */ #ifdef HAVE_PRAGMA_PACK #pragma pack(1) @@ -71,5 +56,3 @@ struct asf_hdr { #endif int handle_asf(struct ipmi_intf * intf, uint8_t * data, int data_len); - -#endif /* IPMI_ASF_H */ diff --git a/src/plugins/lan/auth.c b/src/plugins/lan/auth.c index 7410e3c..a5304d6 100644 --- a/src/plugins/lan/auth.c +++ b/src/plugins/lan/auth.c @@ -119,14 +119,23 @@ uint8_t * ipmi_auth_md5(struct ipmi_session * s, uint8_t * data, int data_len) #endif /*HAVE_CRYPTO_MD5*/ } -/* +#ifdef HAVE_CRYPTO_MD2 + #define __MD2_ONLY__(x) x +#else + #define __MD2_ONLY__(x) __UNUSED__(x) +#endif + +/* * multi-session authcode generation for MD2 * H(password + session_id + msg + session_seq + password) * * Use OpenSSL implementation of MD2 algorithm if found. * This function is analogous to ipmi_auth_md5 */ -uint8_t * ipmi_auth_md2(struct ipmi_session * s, uint8_t * data, int data_len) +uint8_t * ipmi_auth_md2( + struct ipmi_session *__MD2_ONLY__(s), + uint8_t *__MD2_ONLY__(data), + int __MD2_ONLY__(data_len)) { #ifdef HAVE_CRYPTO_MD2 MD2_CTX ctx; diff --git a/src/plugins/lan/auth.h b/src/plugins/lan/auth.h index b9866ba..b7acbba 100644 --- a/src/plugins/lan/auth.h +++ b/src/plugins/lan/auth.h @@ -30,11 +30,8 @@ * EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. */ -#ifndef IPMI_AUTH_H -#define IPMI_AUTH_H +#pragma once uint8_t * ipmi_auth_md2(struct ipmi_session * s, uint8_t * data, int data_len); uint8_t * ipmi_auth_md5(struct ipmi_session * s, uint8_t * data, int data_len); uint8_t * ipmi_auth_special(struct ipmi_session * s); - -#endif /*IPMI_AUTH_H*/ diff --git a/src/plugins/lan/lan.c b/src/plugins/lan/lan.c index 40ba233..2e5f212 100644 --- a/src/plugins/lan/lan.c +++ b/src/plugins/lan/lan.c @@ -29,7 +29,6 @@ * LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE, * EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. */ -#define _GNU_SOURCE #include <stdlib.h> #include <stdio.h> @@ -95,7 +94,6 @@ static struct ipmi_rs * ipmi_lan_recv_sol(struct ipmi_intf * intf); static struct ipmi_rs * ipmi_lan_send_sol(struct ipmi_intf * intf, struct ipmi_v2_payload * payload); static struct ipmi_rs * ipmi_lan_send_cmd(struct ipmi_intf * intf, struct ipmi_rq * req); -static int ipmi_lan_send_rsp(struct ipmi_intf * intf, struct ipmi_rs * rsp); static int ipmi_lan_open(struct ipmi_intf * intf); static void ipmi_lan_close(struct ipmi_intf * intf); static int ipmi_lan_ping(struct ipmi_intf * intf); @@ -109,7 +107,6 @@ struct ipmi_intf ipmi_lan_intf = { .open = ipmi_lan_open, .close = ipmi_lan_close, .sendrecv = ipmi_lan_send_cmd, - .sendrsp = ipmi_lan_send_rsp, .recv_sol = ipmi_lan_recv_sol, .send_sol = ipmi_lan_send_sol, .keepalive = ipmi_lan_keepalive, @@ -124,7 +121,7 @@ ipmi_req_add_entry(struct ipmi_intf * intf, struct ipmi_rq * req, uint8_t req_se struct ipmi_rq_entry * e; e = malloc(sizeof(struct ipmi_rq_entry)); - if (e == NULL) { + if (!e) { lprintf(LOG_ERR, "ipmitool: malloc failure"); return NULL; } @@ -135,7 +132,7 @@ ipmi_req_add_entry(struct ipmi_intf * intf, struct ipmi_rq * req, uint8_t req_se e->intf = intf; e->rq_seq = req_seq; - if (ipmi_req_entries == NULL) + if (!ipmi_req_entries) ipmi_req_entries = e; else ipmi_req_entries_tail->next = e; @@ -151,7 +148,7 @@ ipmi_req_lookup_entry(uint8_t seq, uint8_t cmd) { struct ipmi_rq_entry * e = ipmi_req_entries; while (e && (e->rq_seq != seq || e->req.msg.cmd != cmd)) { - if (e->next == NULL || e == e->next) + if (!e->next || e == e->next) return NULL; e = e->next; } @@ -206,7 +203,7 @@ ipmi_req_clear_entries(void) while (e) { lprintf(LOG_DEBUG+3, "cleared list entry seq=0x%02x cmd=0x%02x", e->rq_seq, e->req.msg.cmd); - if (e->next != NULL) { + if (e->next) { p = e->next; free(e); e = p; @@ -341,11 +338,11 @@ ipmi_lan_recv_packet(struct ipmi_intf * intf) * asf.data[f:a]= 0x000000000000 */ static int -ipmi_handle_pong(struct ipmi_intf * intf, struct ipmi_rs * rsp) +ipmi_handle_pong(struct ipmi_rs *rsp) { - struct rmcp_pong * pong; + struct rmcp_pong *pong; - if (rsp == NULL) + if (!rsp) return -1; pong = (struct rmcp_pong *)rsp->data; @@ -402,7 +399,7 @@ ipmi_lan_ping(struct ipmi_intf * intf) int rv; data = malloc(len); - if (data == NULL) { + if (!data) { lprintf(LOG_ERR, "ipmitool: malloc failure"); return -1; } @@ -463,7 +460,7 @@ ipmi_lan_poll_recv(struct ipmi_intf * intf) rsp = ipmi_lan_recv_packet(intf); - while (rsp != NULL) { + while (rsp) { /* parse response headers */ memcpy(&rmcp_rsp, rsp->data, 4); @@ -471,7 +468,7 @@ ipmi_lan_poll_recv(struct ipmi_intf * intf) switch (rmcp_rsp.class) { case RMCP_CLASS_ASF: /* ping response packet */ - rv = ipmi_handle_pong(intf, rsp); + rv = ipmi_handle_pong(rsp); return (rv <= 0) ? NULL : rsp; case RMCP_CLASS_IPMI: /* handled by rest of function */ @@ -613,7 +610,7 @@ ipmi_lan_poll_recv(struct ipmi_intf * intf) rsp = !rsp->ccode ? ipmi_lan_recv_packet(intf) : NULL; if (!entry->bridging_level) entry->req.msg.cmd = entry->req.msg.target_cmd; - if (rsp == NULL) { + if (!rsp) { ipmi_req_remove_entry(entry->rq_seq, entry->req.msg.cmd); } continue; @@ -736,10 +733,10 @@ ipmi_lan_build_cmd(struct ipmi_intf * intf, struct ipmi_rq * req, int isRetry) } else { - // We dont have this request in the list so we can add it + // We don't have this request in the list so we can add it // to the list entry = ipmi_req_add_entry(intf, req, curr_seq); - if (entry == NULL) + if (!entry) return NULL; } @@ -749,7 +746,7 @@ ipmi_lan_build_cmd(struct ipmi_intf * intf, struct ipmi_rq * req, int isRetry) if (intf->transit_addr != intf->my_addr && intf->transit_addr != 0) len += 8; msg = malloc(len); - if (msg == NULL) { + if (!msg) { lprintf(LOG_ERR, "ipmitool: malloc failure"); return NULL; } @@ -909,7 +906,7 @@ ipmi_lan_send_cmd(struct ipmi_intf * intf, struct ipmi_rq * req) lprintf(LOG_DEBUG, "ipmi_lan_send_cmd:opened=[%d], open=[%d]", intf->opened, intf->open); - if (intf->opened == 0 && intf->open != NULL) { + if (!intf->opened && intf->open) { if (intf->open(intf) < 0) { lprintf(LOG_DEBUG, "Failed to open LAN interface"); return NULL; @@ -922,7 +919,7 @@ ipmi_lan_send_cmd(struct ipmi_intf * intf, struct ipmi_rq * req) isRetry = ( try > 0 ) ? 1 : 0; entry = ipmi_lan_build_cmd(intf, req, isRetry); - if (entry == NULL) { + if (!entry) { lprintf(LOG_ERR, "Aborting send command, unable to build"); return NULL; } @@ -947,7 +944,7 @@ ipmi_lan_send_cmd(struct ipmi_intf * intf, struct ipmi_rq * req) /* Duplicate Request ccode most likely indicates a response to a previous retry. Ignore and keep polling. */ - if((rsp != NULL) && (rsp->ccode == 0xcf)) { + if(rsp && rsp->ccode == 0xcf) { rsp = NULL; rsp = ipmi_lan_poll_recv(intf); } @@ -968,14 +965,14 @@ ipmi_lan_send_cmd(struct ipmi_intf * intf, struct ipmi_rq * req) // This is the corner case where the remote controller responds very slowly. // // Example: We have to send command 23 and 2d. - // If we send command,seq as 23,10 and if we dont get any response it will + // If we send command,seq as 23,10 and if we don't get any response it will // retry 4 times with 23,10 and then come out here and indicate that there is no // response from the remote controller and will send the next command for // ie 2d,11. And if the BMC is slow to respond and returns 23,10 then it // will match it in the list and will take response of command 23 as response // for command 2d and return success. So ideally when retries are done and // are out of this function we should be clearing the list to be safe so that - // we dont match the old response with new request. + // we don't match the old response with new request. // [23, 10] --> BMC // [23, 10] --> BMC // [23, 10] --> BMC @@ -989,135 +986,6 @@ ipmi_lan_send_cmd(struct ipmi_intf * intf, struct ipmi_rq * req) return rsp; } -static uint8_t * -ipmi_lan_build_rsp(struct ipmi_intf * intf, struct ipmi_rs * rsp, int * llen) -{ - struct rmcp_hdr rmcp = { - .ver = RMCP_VERSION_1, - .class = RMCP_CLASS_IPMI, - .seq = 0xff, - }; - struct ipmi_session * s = intf->session; - int cs, mp, ap = 0, tmp; - int len; - uint8_t * msg; - - len = rsp->data_len + 22; - if (s->active) - len += 16; - - msg = malloc(len); - if (msg == NULL) { - lprintf(LOG_ERR, "ipmitool: malloc failure"); - return NULL; - } - memset(msg, 0, len); - - /* rmcp header */ - memcpy(msg, &rmcp, 4); - len = sizeof(rmcp); - - /* ipmi session header */ - msg[len++] = s->active ? s->authtype : 0; - - if (s->in_seq) { - s->in_seq++; - if (s->in_seq == 0) - s->in_seq++; - } - memcpy(msg+len, &s->in_seq, 4); - len += 4; - memcpy(msg+len, &s->session_id, 4); - len += 4; - - /* session authcode, if session active and authtype is not none */ - if (s->active && s->authtype) { - ap = len; - memcpy(msg+len, s->authcode, 16); - len += 16; - } - - /* message length */ - msg[len++] = rsp->data_len + 8; - - /* message header */ - cs = mp = len; - msg[len++] = IPMI_REMOTE_SWID; - msg[len++] = rsp->msg.netfn << 2; - tmp = len - cs; - msg[len++] = ipmi_csum(msg+cs, tmp); - cs = len; - msg[len++] = IPMI_BMC_SLAVE_ADDR; - msg[len++] = (rsp->msg.seq << 2) | (rsp->msg.lun & 3); - msg[len++] = rsp->msg.cmd; - - /* completion code */ - msg[len++] = rsp->ccode; - - /* message data */ - if (rsp->data_len) { - memcpy(msg+len, rsp->data, rsp->data_len); - len += rsp->data_len; - } - - /* second checksum */ - tmp = len - cs; - msg[len++] = ipmi_csum(msg+cs, tmp); - - if (s->active) { - uint8_t * d; - switch (s->authtype) { - case IPMI_SESSION_AUTHTYPE_MD5: - d = ipmi_auth_md5(s, msg+mp, msg[mp-1]); - memcpy(msg+ap, d, 16); - break; - case IPMI_SESSION_AUTHTYPE_MD2: - d = ipmi_auth_md2(s, msg+mp, msg[mp-1]); - memcpy(msg+ap, d, 16); - break; - } - } - - *llen = len; - return msg; -} - -static int -ipmi_lan_send_rsp(struct ipmi_intf * intf, struct ipmi_rs * rsp) -{ - uint8_t * msg; - int len = 0; - int rv; - - msg = ipmi_lan_build_rsp(intf, rsp, &len); - if (len <= 0 || msg == NULL) { - lprintf(LOG_ERR, "Invalid response packet"); - if (msg != NULL) { - free(msg); - msg = NULL; - } - return -1; - } - - rv = sendto(intf->fd, msg, len, 0, - (struct sockaddr *)&intf->session->addr, - intf->session->addrlen); - if (rv < 0) { - lprintf(LOG_ERR, "Packet send failed"); - if (msg != NULL) { - free(msg); - msg = NULL; - } - return -1; - } - - if (msg != NULL) { - free(msg); - msg = NULL; - } - return 0; -} - /* * IPMI SOL Payload Format * +--------------------+ @@ -1163,7 +1031,7 @@ uint8_t * ipmi_lan_build_sol_msg(struct ipmi_intf * intf, payload->payload.sol_packet.character_count; // The actual payload msg = malloc(len); - if (msg == NULL) { + if (!msg) { lprintf(LOG_ERR, "ipmitool: malloc failure"); return NULL; } @@ -1256,15 +1124,15 @@ ipmi_lan_send_sol_payload(struct ipmi_intf * intf, int len; int try = 0; - if (intf->opened == 0 && intf->open != NULL) { + if (!intf->opened && intf->open) { if (intf->open(intf) < 0) return NULL; } msg = ipmi_lan_build_sol_msg(intf, payload, &len); - if (len <= 0 || msg == NULL) { + if (len <= 0 || !msg) { lprintf(LOG_ERR, "Invalid SOL payload packet"); - if (msg != NULL) { + if (msg) { free(msg); msg = NULL; } @@ -1312,7 +1180,7 @@ ipmi_lan_send_sol_payload(struct ipmi_intf * intf, } } - if (msg != NULL) { + if (msg) { free(msg); msg = NULL; } @@ -1442,8 +1310,7 @@ ipmi_lan_send_sol(struct ipmi_intf * intf, * */ static int -check_sol_packet_for_new_data(struct ipmi_intf * intf, - struct ipmi_rs *rsp) +check_sol_packet_for_new_data(struct ipmi_rs *rsp) { static uint8_t last_received_sequence_number = 0; static uint8_t last_received_byte_count = 0; @@ -1476,7 +1343,7 @@ check_sol_packet_for_new_data(struct ipmi_intf * intf, } /* - *Rember the data for next round + * Remember the data for next round */ if (rsp && rsp->payload.sol_packet.packet_sequence_number) { @@ -1543,7 +1410,7 @@ ipmi_lan_recv_sol(struct ipmi_intf * intf) * Remembers the data sent, and alters the data to just * include the new stuff. */ - check_sol_packet_for_new_data(intf, rsp); + check_sol_packet_for_new_data(rsp); return rsp; } @@ -1564,9 +1431,7 @@ ipmi_lan_keepalive(struct ipmi_intf * intf) return 0; rsp = intf->sendrecv(intf, &req); - if (rsp == NULL) - return -1; - if (rsp->ccode > 0) + if (!rsp || rsp->ccode) return -1; return 0; @@ -1594,14 +1459,14 @@ ipmi_get_auth_capabilities_cmd(struct ipmi_intf * intf) req.msg.data_len = 2; rsp = intf->sendrecv(intf, &req); - if (rsp == NULL) { + if (!rsp) { lprintf(LOG_INFO, "Get Auth Capabilities command failed"); return -1; } if (verbose > 2) printbuf(rsp->data, rsp->data_len, "get_auth_capabilities"); - if (rsp->ccode > 0) { + if (rsp->ccode) { lprintf(LOG_INFO, "Get Auth Capabilities command failed: %s", val2str(rsp->ccode, completion_code_vals)); return -1; @@ -1709,14 +1574,14 @@ ipmi_get_session_challenge_cmd(struct ipmi_intf * intf) req.msg.data_len = 17; /* 1 byte for authtype, 16 for user */ rsp = intf->sendrecv(intf, &req); - if (rsp == NULL) { + if (!rsp) { lprintf(LOG_ERR, "Get Session Challenge command failed"); return -1; } if (verbose > 2) printbuf(rsp->data, rsp->data_len, "get_session_challenge"); - if (rsp->ccode > 0) { + if (rsp->ccode) { switch (rsp->ccode) { case 0x81: lprintf(LOG_ERR, "Invalid user name"); @@ -1784,7 +1649,7 @@ ipmi_activate_session_cmd(struct ipmi_intf * intf) val2str(s->authtype, ipmi_authtype_session_vals)); rsp = intf->sendrecv(intf, &req); - if (rsp == NULL) { + if (!rsp) { lprintf(LOG_ERR, "Activate Session command failed"); s->active = 0; return -1; @@ -1875,7 +1740,7 @@ ipmi_set_session_privlvl_cmd(struct ipmi_intf * intf) rsp = intf->sendrecv(intf, &req); bridge_possible = backup_bridge_possible; - if (rsp == NULL) { + if (!rsp) { lprintf(LOG_ERR, "Set Session Privilege Level to %s failed", val2str(privlvl, ipmi_privlvl_vals)); return -1; @@ -1883,7 +1748,7 @@ ipmi_set_session_privlvl_cmd(struct ipmi_intf * intf) if (verbose > 2) printbuf(rsp->data, rsp->data_len, "set_session_privlvl"); - if (rsp->ccode > 0) { + if (rsp->ccode) { lprintf(LOG_ERR, "Set Session Privilege Level to %s failed: %s", val2str(privlvl, ipmi_privlvl_vals), val2str(rsp->ccode, completion_code_vals)); @@ -1919,7 +1784,7 @@ ipmi_close_session_cmd(struct ipmi_intf * intf) req.msg.data_len = 4; rsp = intf->sendrecv(intf, &req); - if (rsp == NULL) { + if (!rsp) { lprintf(LOG_ERR, "Close Session command failed"); return -1; } @@ -1931,7 +1796,7 @@ ipmi_close_session_cmd(struct ipmi_intf * intf) "session ID %08lx", (long)session_id); return -1; } - if (rsp->ccode > 0) { + if (rsp->ccode) { lprintf(LOG_ERR, "Close Session command failed: %s", val2str(rsp->ccode, completion_code_vals)); return -1; @@ -2028,7 +1893,7 @@ ipmi_lan_open(struct ipmi_intf * intf) struct ipmi_session *s; struct ipmi_session_params *p; - if (intf == NULL || intf->opened) + if (!intf || intf->opened) return -1; s = intf->session; @@ -2043,7 +1908,7 @@ ipmi_lan_open(struct ipmi_intf * intf) if (p->retry == 0) p->retry = IPMI_LAN_RETRY; - if (p->hostname == NULL || strlen((const char *)p->hostname) == 0) { + if (!p->hostname || strlen((const char *)p->hostname) == 0) { lprintf(LOG_ERR, "No hostname specified!"); return -1; } diff --git a/src/plugins/lan/lan.h b/src/plugins/lan/lan.h index 3ba3055..4b26922 100644 --- a/src/plugins/lan/lan.h +++ b/src/plugins/lan/lan.h @@ -30,12 +30,9 @@ * EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. */ -#ifndef IPMI_LAN_H -#define IPMI_LAN_H +#pragma once #include <ipmitool/ipmi.h> #include <ipmitool/ipmi_intf.h> extern struct ipmi_intf ipmi_lan_intf; - -#endif /*IPMI_LAN_H*/ diff --git a/src/plugins/lan/rmcp.h b/src/plugins/lan/rmcp.h index b979d92..f283bf3 100644 --- a/src/plugins/lan/rmcp.h +++ b/src/plugins/lan/rmcp.h @@ -30,8 +30,7 @@ * EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. */ -#ifndef IPMI_RMCP_H -#define IPMI_RMCP_H +#pragma once #include <ipmitool/helper.h> #include "lan.h" @@ -46,24 +45,11 @@ #define RMCP_TYPE_NORM 0x00 #define RMCP_TYPE_ACK 0x01 -static const struct valstr rmcp_type_vals[] __attribute__((unused)) = { - { RMCP_TYPE_NORM, "Normal RMCP" }, - { RMCP_TYPE_ACK, "RMCP ACK" }, - { 0, NULL } -}; - #define RMCP_CLASS_MASK 0x1f #define RMCP_CLASS_ASF 0x06 #define RMCP_CLASS_IPMI 0x07 #define RMCP_CLASS_OEM 0x08 -static const struct valstr rmcp_class_vals[] __attribute__((unused)) = { - { RMCP_CLASS_ASF, "ASF" }, - { RMCP_CLASS_IPMI, "IPMI" }, - { RMCP_CLASS_OEM, "OEM" }, - { 0, NULL } -}; - #ifdef HAVE_PRAGMA_PACK #pragma pack(1) #endif @@ -95,5 +81,3 @@ struct rmcp_pong { #endif int handle_rmcp(struct ipmi_intf * intf, uint8_t * data, int data_len); - -#endif /* IPMI_RMCP_H */ diff --git a/src/plugins/lanplus/Makefile.in b/src/plugins/lanplus/Makefile.in deleted file mode 100644 index d24775b..0000000 --- a/src/plugins/lanplus/Makefile.in +++ /dev/null @@ -1,649 +0,0 @@ -# Makefile.in generated by automake 1.14.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994-2013 Free Software Foundation, Inc. - -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -# Copyright (c) 2003 Sun Microsystems, Inc. All Rights Reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# Redistribution of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# -# Redistribution in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in the -# documentation and/or other materials provided with the distribution. -# -# Neither the name of Sun Microsystems, Inc. or the names of -# contributors may be used to endorse or promote products derived -# from this software without specific prior written permission. -# -# This software is provided "AS IS," without a warranty of any kind. -# ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, -# INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A -# PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY EXCLUDED. -# SUN MICROSYSTEMS, INC. ("SUN") AND ITS LICENSORS SHALL NOT BE LIABLE -# FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING -# OR DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES. IN NO EVENT WILL -# SUN OR ITS LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA, -# OR FOR DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR -# PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF -# LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE, -# EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. - -VPATH = @srcdir@ -am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' -am__make_running_with_option = \ - case $${target_option-} in \ - ?) ;; \ - *) echo "am__make_running_with_option: internal error: invalid" \ - "target option '$${target_option-}' specified" >&2; \ - exit 1;; \ - esac; \ - has_opt=no; \ - sane_makeflags=$$MAKEFLAGS; \ - if $(am__is_gnu_make); then \ - sane_makeflags=$$MFLAGS; \ - else \ - case $$MAKEFLAGS in \ - *\\[\ \ ]*) \ - bs=\\; \ - sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ - | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ - esac; \ - fi; \ - skip_next=no; \ - strip_trailopt () \ - { \ - flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ - }; \ - for flg in $$sane_makeflags; do \ - test $$skip_next = yes && { skip_next=no; continue; }; \ - case $$flg in \ - *=*|--*) continue;; \ - -*I) strip_trailopt 'I'; skip_next=yes;; \ - -*I?*) strip_trailopt 'I';; \ - -*O) strip_trailopt 'O'; skip_next=yes;; \ - -*O?*) strip_trailopt 'O';; \ - -*l) strip_trailopt 'l'; skip_next=yes;; \ - -*l?*) strip_trailopt 'l';; \ - -[dEDm]) skip_next=yes;; \ - -[JT]) skip_next=yes;; \ - esac; \ - case $$flg in \ - *$$target_option*) has_opt=yes; break;; \ - esac; \ - done; \ - test $$has_opt = yes -am__make_dryrun = (target_option=n; $(am__make_running_with_option)) -am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -target_triplet = @target@ -subdir = src/plugins/lanplus -DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ - $(top_srcdir)/depcomp -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(install_sh) -d -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -LTLIBRARIES = $(noinst_LTLIBRARIES) -libintf_lanplus_la_DEPENDENCIES = $(top_builddir)/lib/libipmitool.la -am_libintf_lanplus_la_OBJECTS = lanplus.lo lanplus_strings.lo \ - lanplus_crypt.lo lanplus_dump.lo lanplus_crypt_impl.lo -libintf_lanplus_la_OBJECTS = $(am_libintf_lanplus_la_OBJECTS) -AM_V_lt = $(am__v_lt_@AM_V@) -am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@) -am__v_lt_0 = --silent -am__v_lt_1 = -AM_V_P = $(am__v_P_@AM_V@) -am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) -am__v_P_0 = false -am__v_P_1 = : -AM_V_GEN = $(am__v_GEN_@AM_V@) -am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) -am__v_GEN_0 = @echo " GEN " $@; -am__v_GEN_1 = -AM_V_at = $(am__v_at_@AM_V@) -am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) -am__v_at_0 = @ -am__v_at_1 = -DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) -depcomp = $(SHELL) $(top_srcdir)/depcomp -am__depfiles_maybe = depfiles -am__mv = mv -f -COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ - $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ - $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \ - $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ - $(AM_CFLAGS) $(CFLAGS) -AM_V_CC = $(am__v_CC_@AM_V@) -am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@) -am__v_CC_0 = @echo " CC " $@; -am__v_CC_1 = -CCLD = $(CC) -LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ - $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ - $(AM_LDFLAGS) $(LDFLAGS) -o $@ -AM_V_CCLD = $(am__v_CCLD_@AM_V@) -am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@) -am__v_CCLD_0 = @echo " CCLD " $@; -am__v_CCLD_1 = -SOURCES = $(libintf_lanplus_la_SOURCES) -DIST_SOURCES = $(libintf_lanplus_la_SOURCES) -am__can_run_installinfo = \ - case $$AM_UPDATE_INFO_DIR in \ - n|no|NO) false;; \ - *) (install-info --version) >/dev/null 2>&1;; \ - esac -am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) -# Read a list of newline-separated strings from the standard input, -# and print each of them once, without duplicates. Input order is -# *not* preserved. -am__uniquify_input = $(AWK) '\ - BEGIN { nonempty = 0; } \ - { items[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in items) print i; }; } \ -' -# Make sure the list of sources is unique. This is necessary because, -# e.g., the same source file might be shared among _SOURCES variables -# for different programs/libraries. -am__define_uniq_tagged_files = \ - list='$(am__tagged_files)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | $(am__uniquify_input)` -ETAGS = etags -CTAGS = ctags -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -ARCH = @ARCH@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BASEDIR = @BASEDIR@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DISTRO = @DISTRO@ -DLLTOOL = @DLLTOOL@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FGREP = @FGREP@ -GREP = @GREP@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INTF_BMC = @INTF_BMC@ -INTF_BMC_LIB = @INTF_BMC_LIB@ -INTF_DUMMY = @INTF_DUMMY@ -INTF_DUMMY_LIB = @INTF_DUMMY_LIB@ -INTF_FREE = @INTF_FREE@ -INTF_FREE_LIB = @INTF_FREE_LIB@ -INTF_IMB = @INTF_IMB@ -INTF_IMB_LIB = @INTF_IMB_LIB@ -INTF_LAN = @INTF_LAN@ -INTF_LANPLUS = @INTF_LANPLUS@ -INTF_LANPLUS_LIB = @INTF_LANPLUS_LIB@ -INTF_LAN_LIB = @INTF_LAN_LIB@ -INTF_LIPMI = @INTF_LIPMI@ -INTF_LIPMI_LIB = @INTF_LIPMI_LIB@ -INTF_OPEN = @INTF_OPEN@ -INTF_OPEN_LIB = @INTF_OPEN_LIB@ -INTF_SERIAL = @INTF_SERIAL@ -INTF_SERIAL_LIB = @INTF_SERIAL_LIB@ -INTF_USB = @INTF_USB@ -INTF_USB_LIB = @INTF_USB_LIB@ -IPMITOOL_INTF_LIB = @IPMITOOL_INTF_LIB@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ -MKDIR_P = @MKDIR_P@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OS = @OS@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -POW_LIB = @POW_LIB@ -PSTAMP = @PSTAMP@ -RANLIB = @RANLIB@ -RPMBUILD = @RPMBUILD@ -RPM_RELEASE = @RPM_RELEASE@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -VERSION = @VERSION@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_configure_args = @ac_configure_args@ -ac_ct_AR = @ac_ct_AR@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target = @target@ -target_alias = @target_alias@ -target_cpu = @target_cpu@ -target_os = @target_os@ -target_vendor = @target_vendor@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -MAINTAINERCLEANFILES = Makefile.in -AM_CPPFLAGS = -I$(top_srcdir)/include -EXTRA_LTLIBRARIES = libintf_lanplus.la -noinst_LTLIBRARIES = @INTF_LANPLUS_LIB@ -libintf_lanplus_la_LIBADD = $(top_builddir)/lib/libipmitool.la -libintf_lanplus_la_SOURCES = \ - rmcp.h asf.h \ - lanplus.c lanplus.h \ - lanplus_strings.c \ - lanplus_crypt.c lanplus_crypt.h \ - lanplus_dump.h lanplus_dump.c \ - lanplus_crypt_impl.h lanplus_crypt_impl.c - -all: all-am - -.SUFFIXES: -.SUFFIXES: .c .lo .o .obj -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/plugins/lanplus/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign src/plugins/lanplus/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): - -clean-noinstLTLIBRARIES: - -test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES) - @list='$(noinst_LTLIBRARIES)'; \ - locs=`for p in $$list; do echo $$p; done | \ - sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \ - sort -u`; \ - test -z "$$locs" || { \ - echo rm -f $${locs}; \ - rm -f $${locs}; \ - } - -libintf_lanplus.la: $(libintf_lanplus_la_OBJECTS) $(libintf_lanplus_la_DEPENDENCIES) $(EXTRA_libintf_lanplus_la_DEPENDENCIES) - $(AM_V_CCLD)$(LINK) $(libintf_lanplus_la_OBJECTS) $(libintf_lanplus_la_LIBADD) $(LIBS) - -mostlyclean-compile: - -rm -f *.$(OBJEXT) - -distclean-compile: - -rm -f *.tab.c - -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/lanplus.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/lanplus_crypt.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/lanplus_crypt_impl.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/lanplus_dump.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/lanplus_strings.Plo@am__quote@ - -.c.o: -@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $< - -.c.obj: -@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'` - -.c.lo: -@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $< - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs - -ID: $(am__tagged_files) - $(am__define_uniq_tagged_files); mkid -fID $$unique -tags: tags-am -TAGS: tags - -tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) - set x; \ - here=`pwd`; \ - $(am__define_uniq_tagged_files); \ - shift; \ - if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - if test $$# -gt 0; then \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - "$$@" $$unique; \ - else \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$unique; \ - fi; \ - fi -ctags: ctags-am - -CTAGS: ctags -ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) - $(am__define_uniq_tagged_files); \ - test -z "$(CTAGS_ARGS)$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && $(am__cd) $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) "$$here" -cscopelist: cscopelist-am - -cscopelist-am: $(am__tagged_files) - list='$(am__tagged_files)'; \ - case "$(srcdir)" in \ - [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ - *) sdir=$(subdir)/$(srcdir) ;; \ - esac; \ - for i in $$list; do \ - if test -f "$$i"; then \ - echo "$(subdir)/$$i"; \ - else \ - echo "$$sdir/$$i"; \ - fi; \ - done >> $(top_builddir)/cscope.files - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-am -all-am: Makefile $(LTLIBRARIES) -installdirs: -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - if test -z '$(STRIP)'; then \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - install; \ - else \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ - fi -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." - -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) -clean: clean-am - -clean-am: clean-generic clean-libtool clean-noinstLTLIBRARIES \ - mostlyclean-am - -distclean: distclean-am - -rm -rf ./$(DEPDIR) - -rm -f Makefile -distclean-am: clean-am distclean-compile distclean-generic \ - distclean-tags - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -rf ./$(DEPDIR) - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-compile mostlyclean-generic \ - mostlyclean-libtool - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: - -.MAKE: install-am install-strip - -.PHONY: CTAGS GTAGS TAGS all all-am check check-am clean clean-generic \ - clean-libtool clean-noinstLTLIBRARIES cscopelist-am ctags \ - ctags-am distclean distclean-compile distclean-generic \ - distclean-libtool distclean-tags distdir dvi dvi-am html \ - html-am info info-am install install-am install-data \ - install-data-am install-dvi install-dvi-am install-exec \ - install-exec-am install-html install-html-am install-info \ - install-info-am install-man install-pdf install-pdf-am \ - install-ps install-ps-am install-strip installcheck \ - installcheck-am installdirs maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-compile \ - mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ - tags tags-am uninstall uninstall-am - - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/src/plugins/lanplus/README.lanplus b/src/plugins/lanplus/README.lanplus new file mode 100644 index 0000000..4406d5b --- /dev/null +++ b/src/plugins/lanplus/README.lanplus @@ -0,0 +1,74 @@ +This interface exists to provide a means of connecting to an IPMIv2 enabled +BMC. In some places, the IPMIv2 specification is either unclear or +inconsistent, and interpretations of the intent of the specification had to +be made at the discretion of the implementor. The purpose of this +document is to make those decisions clear so that 1) they can be reviewed +by others and 2) so that the rationale for those decisions can be made +clear. + +* Though it's not stated explicitly with which algorithm the K1 and K2 keys +should be generated, we chose to use the authentication algorithm. The +specification states that K1 and K2 are generated with an HMAC algorithm, +and all of the authentication algorithms (except for "none") are HMAC +algorithms, whereas the integrity algorithms are not all HMAC. See section +13.32 for details about K1 and K2, and section + + +* The IPMIv2 specification describes a key, Kg, that is the "BMC key". +This key functions as a global key that is required to be known in addition +to the user's key, by authenticating users. If the BMC has a null Kg, the +users key, Kuid, is used in its place in algorithms where Kg is required, +per the specification section 13.33. A user can obtain the status of Kg by +querying the BMC with the Get Channel Authentication Capabilities command. +Currently, this implementation does not provide a way for a user to specify +Kg for BMCs that require it. + + +* The specification is unclear as to which key is used for HMAC based +integrity checking. One the one hand, section 13.28.4 states explicitly +that HMAC integrity algorithms use the session integrity key as the HMAC +key. Confusing that matter is a statement in section 13.32 regarding the +creation of additional keying material. In this section it is stated that +"all keying material for the RSP integrity and confidentiality algorithms +will be generated by processing a pre-defined set of constants using HMAC +per [RFC2104], keyed by sik". And "For the mandatory-to-implement +integrity and confidentiality algorithms defined in this specification, +processing the first two (2) constants will generate the require amount of +keying material." We decided to use K1 as our HMAC key for the generation +of authentication codes (integrity checking). Furthermore, we are using +all 20 bytes of K1. + + +* IPMIv2 compliant BMCs are supposed to support 20 byte passwords, as well +store metadata describing whether the password was stored as a 16 byte or +20 byte class password. We do not currently support 20 byte passwords. It +should be noted that there are obvious mistakes in the SET USER PASSWORD +command specification, as it mentions the ability to query for 16/20 byte +password status, but the packet format does not support this. + + +* The IPMIv2 specification describes a type of login called a "role only +login." This feature allows a user to login providing only a requested +privilege level and a password. We do not currently support this feature. +Supporting this feature would only require the ability to specify +username/privilege lookups in the RAKP 1 message sent from ipmitool. We +currently specify the use of username only lookups for authentication. + + +* In the IPMIv2 packet description in table 13-8 of the IPMv2 +specification, there are two fields that are rather ambiguous in meaning. +The fields are "Pad Length" and "Next Header". Although neither field is +listed as belonging to the IPMIv2 packet format, we include/expect them +both in our IPMIv2 packets. Are rationale is 1) the Next Headers field's +comment states what the value of that field should be for IPMIv2, and 2) +for the most part the ASF and IPMIv2 fields seem to parallel each other, +and we feel that the Pad Length and Next Header fields were left out of the +IPMIv2 column by mistake. + + +* The GET CHANNEL CIPHER SUITES command documentation seems to have +mistakes. The "start of record" byte is stated to be either 0x30 or 0x31, +whereas the detailed description in table 22-18 leads us to believe that +this byte should really be 0xC0 or 0xC1. Also the description of bits 5:0 +in the start of record byte should probably be 00_0000 rather than 00_000. + diff --git a/src/plugins/lanplus/README.sol b/src/plugins/lanplus/README.sol new file mode 100644 index 0000000..4c64e2a --- /dev/null +++ b/src/plugins/lanplus/README.sol @@ -0,0 +1,76 @@ +This document was last updated for release 1.8.8. + +This document explains how Serial Over Lan is implemented on in the +ipmitool IPMI client. Obviously, the code itself is authoritative, but +this document should serve as a good starting point. + +Serial Over Lan (SOL) is defined in the IPMI v2 specification published by +Intel and available at http://www.intel.com/design/servers/ipmi/. SOL +functionality is built on top of the RMCP+ protocol as an additional +payload type (type 1). + +The high end SOL logic is implemented in src/ipmitool/lib/ipmi_sol.c. SOL +sessions are begun in ipmitool using the "sol activate" command. This +command maps directly to the IPMI Activate Payload command. It first +verifies that an RMCP+ session (lanplus interface) is being used to +establish the session. Although the spec allows for a SOL connection to be +established on a port different than the RMCP+ port that the "activate +payload" command issued, ipmitool does not support this. + +Once a session has been established (the activate payload command +succeeds), ipmitool simply loops over a select() on user input and data +returned from the BMC. All user input is first filtered so that special +escape sequences can suspend or deactivate the SOL session and so that data +can be broken into chunks no greater than N bytes. This maximum is +specified by the BMC in the response to the Activate Payload command. + +User input to the BMC is handled in ipmitool/src/plugins/lanplus/lanplus.c. +Every SOL packet (with one exception) traveling in either direction causes +the recipient to return an acknowledgement packet, though acks themself are +not acknowledged. The transport layer in lanplus.c handles the logic +regarding acks, partial acks, sequence numbers. SOL acknowledgements +packets be acks, partial acks (the remote destination processed only some +of the data), and nacks (requests to stop sending packets). Nacks are not +honored by ipmitool. + +Note that one way that SOL communication differs from standard IPMI +commands, is that it is not simply a request response protocol. Packets +may be returned asynchronously from the BMC. When establishing a SOL +session, ipmitool registers a callback for asynchronously received data. +This call back simply prints text returned from the BMC. + +Once a user has chosen to exit the SOL session (with ~.) ipmitool sends the +IPMI SOL Deactivate command to the BMC. + +The standard code path for SOL logic follows: + ipmi_sol_main (ipmi_sol.c): + + ipmi_sol_activate (ipmi_sol.c): + Argument validation + Creation and dispatch of IPMI Activate Payload command + + ipmi_sol_red_pill (ipmi_sol.c): + Loop on select() for user input and data returned from the BMC + Periodic dispatch of "keep alive" packet to the BMC. + Send user input to the BMC and BMC data to the console. + + processSolUserInput (ipmi_sol.c): + Process possible escape sequences (~., ~B, etc.) + Send (with retries) user data to the BMC + Partial creation of packet payload + + ipmi_lanplus_send_sol (lanplus.c): + Completion of packet payload + Send (with retries) of SOL packet + + ipmi_lanplus_send_payload (lanplus.c): + Creation of RMCP+ packet + Details general to all V2 packet processing, as + well as a some logic to handle ack reception. + + is_sol_partial_ack (lanplus.c): + Determine whether a data needs to be resent + + ipmi_lanplus_recv_sol (lanplus.c): + Handle data received by the BMC. Ack as appropriate. + diff --git a/src/plugins/lanplus/asf.h b/src/plugins/lanplus/asf.h index 7a30418..6453363 100644 --- a/src/plugins/lanplus/asf.h +++ b/src/plugins/lanplus/asf.h @@ -30,8 +30,7 @@ * EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. */ -#ifndef IPMI_ASF_H -#define IPMI_ASF_H +#pragma once #include <ipmitool/helper.h> #include "lanplus.h" @@ -41,20 +40,6 @@ #define ASF_TYPE_PING 0x80 #define ASF_TYPE_PONG 0x40 -static const struct valstr asf_type_vals[] __attribute__((unused)) = { - { 0x10, "Reset" }, - { 0x11, "Power-up" }, - { 0x12, "Unconditional Power-down" }, - { 0x13, "Power Cycle" }, - { 0x40, "Presence Pong" }, - { 0x41, "Capabilities Response" }, - { 0x42, "System State Response" }, - { 0x80, "Presence Ping" }, - { 0x81, "Capabilities Request" }, - { 0x82, "System State Request" }, - { 0x00, NULL } -}; - /* ASF message header */ #ifdef HAVE_PRAGMA_PACK #pragma pack(1) @@ -71,5 +56,3 @@ struct asf_hdr { #endif int handle_asf(struct ipmi_intf * intf, uint8_t * data, int data_len); - -#endif /* IPMI_ASF_H */ diff --git a/src/plugins/lanplus/lanplus.c b/src/plugins/lanplus/lanplus.c index e72e235..ed41380 100644 --- a/src/plugins/lanplus/lanplus.c +++ b/src/plugins/lanplus/lanplus.c @@ -29,7 +29,6 @@ * LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE, * EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. */ -#define _GNU_SOURCE #include <stdlib.h> #include <stdio.h> @@ -103,15 +102,14 @@ static void getIpmiPayloadWireRep( uint8_t rq_seq, uint8_t curr_seq); static void getSolPayloadWireRep( - struct ipmi_intf * intf, uint8_t * msg, struct ipmi_v2_payload * payload); static void read_open_session_response(struct ipmi_rs * rsp, int offset); static void read_rakp2_message(struct ipmi_rs * rsp, int offset, uint8_t alg); static void read_rakp4_message(struct ipmi_rs * rsp, int offset, uint8_t alg); -static void read_session_data(struct ipmi_rs * rsp, int * offset, struct ipmi_session *s); -static void read_session_data_v15(struct ipmi_rs * rsp, int * offset, struct ipmi_session *s); -static void read_session_data_v2x(struct ipmi_rs * rsp, int * offset, struct ipmi_session *s); +static void read_session_data(struct ipmi_rs * rsp, int * offset); +static void read_session_data_v15(struct ipmi_rs * rsp, int * offset); +static void read_session_data_v2x(struct ipmi_rs * rsp, int * offset); static void read_ipmi_response(struct ipmi_rs * rsp, int * offset); static void read_sol_packet(struct ipmi_rs * rsp, int * offset); static struct ipmi_rs * ipmi_lanplus_recv_sol(struct ipmi_intf * intf); @@ -119,7 +117,6 @@ static struct ipmi_rs * ipmi_lanplus_send_sol( struct ipmi_intf * intf, struct ipmi_v2_payload * payload); static int check_sol_packet_for_new_data( - struct ipmi_intf * intf, struct ipmi_rs *rsp); static void ack_sol_packet( struct ipmi_intf * intf, @@ -164,141 +161,115 @@ extern int verbose; * returns 0 on success * 1 on failure */ -int lanplus_get_requested_ciphers(int cipher_suite_id, - uint8_t * auth_alg, - uint8_t * integrity_alg, - uint8_t * crypt_alg) +int +lanplus_get_requested_ciphers(enum cipher_suite_ids cipher_suite_id, + uint8_t *auth_alg, + uint8_t *integrity_alg, + uint8_t *crypt_alg) { -#ifdef HAVE_CRYPTO_SHA256 - if ((cipher_suite_id < 0) || (cipher_suite_id > 17)) { - return 1; - } -#else - if ((cipher_suite_id < 0) || (cipher_suite_id > 14)) - return 1; -#endif /* HAVE_CRYPTO_SHA256 */ /* See table 22-19 for the source of the statement */ switch (cipher_suite_id) { - case 0: + case IPMI_LANPLUS_CIPHER_SUITE_0: *auth_alg = IPMI_AUTH_RAKP_NONE; *integrity_alg = IPMI_INTEGRITY_NONE; *crypt_alg = IPMI_CRYPT_NONE; break; - case 1: + case IPMI_LANPLUS_CIPHER_SUITE_1: *auth_alg = IPMI_AUTH_RAKP_HMAC_SHA1; *integrity_alg = IPMI_INTEGRITY_NONE; *crypt_alg = IPMI_CRYPT_NONE; break; - case 2: + case IPMI_LANPLUS_CIPHER_SUITE_2: *auth_alg = IPMI_AUTH_RAKP_HMAC_SHA1; *integrity_alg = IPMI_INTEGRITY_HMAC_SHA1_96; *crypt_alg = IPMI_CRYPT_NONE; break; - case 3: + case IPMI_LANPLUS_CIPHER_SUITE_3: *auth_alg = IPMI_AUTH_RAKP_HMAC_SHA1; *integrity_alg = IPMI_INTEGRITY_HMAC_SHA1_96; *crypt_alg = IPMI_CRYPT_AES_CBC_128; break; - case 4: + case IPMI_LANPLUS_CIPHER_SUITE_4: *auth_alg = IPMI_AUTH_RAKP_HMAC_SHA1; *integrity_alg = IPMI_INTEGRITY_HMAC_SHA1_96; *crypt_alg = IPMI_CRYPT_XRC4_128; break; - case 5: + case IPMI_LANPLUS_CIPHER_SUITE_5: *auth_alg = IPMI_AUTH_RAKP_HMAC_SHA1; *integrity_alg = IPMI_INTEGRITY_HMAC_SHA1_96; *crypt_alg = IPMI_CRYPT_XRC4_40; break; - case 6: + case IPMI_LANPLUS_CIPHER_SUITE_6: *auth_alg = IPMI_AUTH_RAKP_HMAC_MD5; *integrity_alg = IPMI_INTEGRITY_NONE; *crypt_alg = IPMI_CRYPT_NONE; break; - case 7: + case IPMI_LANPLUS_CIPHER_SUITE_7: *auth_alg = IPMI_AUTH_RAKP_HMAC_MD5; *integrity_alg = IPMI_INTEGRITY_HMAC_MD5_128; *crypt_alg = IPMI_CRYPT_NONE; break; - case 8: + case IPMI_LANPLUS_CIPHER_SUITE_8: *auth_alg = IPMI_AUTH_RAKP_HMAC_MD5; *integrity_alg = IPMI_INTEGRITY_HMAC_MD5_128; *crypt_alg = IPMI_CRYPT_AES_CBC_128; break; - case 9: + case IPMI_LANPLUS_CIPHER_SUITE_9: *auth_alg = IPMI_AUTH_RAKP_HMAC_MD5; *integrity_alg = IPMI_INTEGRITY_HMAC_MD5_128; *crypt_alg = IPMI_CRYPT_XRC4_128; break; - case 10: + case IPMI_LANPLUS_CIPHER_SUITE_10: *auth_alg = IPMI_AUTH_RAKP_HMAC_MD5; *integrity_alg = IPMI_INTEGRITY_HMAC_MD5_128; *crypt_alg = IPMI_CRYPT_XRC4_40; break; - case 11: + case IPMI_LANPLUS_CIPHER_SUITE_11: *auth_alg = IPMI_AUTH_RAKP_HMAC_MD5; *integrity_alg = IPMI_INTEGRITY_MD5_128; *crypt_alg = IPMI_CRYPT_NONE; break; - case 12: + case IPMI_LANPLUS_CIPHER_SUITE_12: *auth_alg = IPMI_AUTH_RAKP_HMAC_MD5; *integrity_alg = IPMI_INTEGRITY_MD5_128; *crypt_alg = IPMI_CRYPT_AES_CBC_128; break; - case 13: + case IPMI_LANPLUS_CIPHER_SUITE_13: *auth_alg = IPMI_AUTH_RAKP_HMAC_MD5; *integrity_alg = IPMI_INTEGRITY_MD5_128; *crypt_alg = IPMI_CRYPT_XRC4_128; break; - case 14: + case IPMI_LANPLUS_CIPHER_SUITE_14: *auth_alg = IPMI_AUTH_RAKP_HMAC_MD5; *integrity_alg = IPMI_INTEGRITY_MD5_128; *crypt_alg = IPMI_CRYPT_XRC4_40; break; #ifdef HAVE_CRYPTO_SHA256 - case 15: + case IPMI_LANPLUS_CIPHER_SUITE_15: *auth_alg = IPMI_AUTH_RAKP_HMAC_SHA256; *integrity_alg = IPMI_INTEGRITY_NONE; *crypt_alg = IPMI_CRYPT_NONE; break; - case 16: + case IPMI_LANPLUS_CIPHER_SUITE_16: *auth_alg = IPMI_AUTH_RAKP_HMAC_SHA256; *integrity_alg = IPMI_INTEGRITY_HMAC_SHA256_128; *crypt_alg = IPMI_CRYPT_NONE; break; - case 17: + case IPMI_LANPLUS_CIPHER_SUITE_17: *auth_alg = IPMI_AUTH_RAKP_HMAC_SHA256; *integrity_alg = IPMI_INTEGRITY_HMAC_SHA256_128; *crypt_alg = IPMI_CRYPT_AES_CBC_128; break; #endif /* HAVE_CRYPTO_SHA256 */ + case IPMI_LANPLUS_CIPHER_SUITE_RESERVED: + default: + return 1; } return 0; } - - -/* - * Reverse the order of arbitrarily long strings of bytes - */ -void lanplus_swap( - uint8_t * buffer, - int length) -{ - int i; - uint8_t temp; - - for (i =0; i < length/2; ++i) - { - temp = buffer[i]; - buffer[i] = buffer[length - 1 - i]; - buffer[length - 1 - i] = temp; - } -} - - - static const struct valstr plus_payload_types_vals[] = { { IPMI_PAYLOAD_TYPE_IPMI, "IPMI (0)" }, // IPMI Message { IPMI_PAYLOAD_TYPE_SOL, "SOL (1)" }, // SOL (Serial over LAN) @@ -320,7 +291,7 @@ ipmi_req_add_entry(struct ipmi_intf * intf, struct ipmi_rq * req, uint8_t req_se struct ipmi_rq_entry * e; e = malloc(sizeof(struct ipmi_rq_entry)); - if (e == NULL) { + if (!e) { lprintf(LOG_ERR, "ipmitool: malloc failure"); return NULL; } @@ -331,7 +302,7 @@ ipmi_req_add_entry(struct ipmi_intf * intf, struct ipmi_rq * req, uint8_t req_se e->intf = intf; e->rq_seq = req_seq; - if (ipmi_req_entries == NULL) + if (!ipmi_req_entries) ipmi_req_entries = e; else ipmi_req_entries_tail->next = e; @@ -523,7 +494,7 @@ ipmi_lan_recv_packet(struct ipmi_intf * intf) * asf.data[f:a]= 0x000000000000 */ static int -ipmi_handle_pong(struct ipmi_intf * intf, struct ipmi_rs * rsp) +ipmi_handle_pong(struct ipmi_rs *rsp) { struct rmcp_pong { struct rmcp_hdr rmcp; @@ -533,7 +504,7 @@ ipmi_handle_pong(struct ipmi_intf * intf, struct ipmi_rs * rsp) uint8_t sup_entities; uint8_t sup_interact; uint8_t reserved[6]; - } * pong; + } *pong; if (!rsp) return -1; @@ -595,7 +566,7 @@ ipmiv2_lan_ping(struct ipmi_intf * intf) int rv; data = malloc(len); - if (data == NULL) { + if (!data) { lprintf(LOG_ERR, "ipmitool: malloc failure"); return -1; } @@ -644,7 +615,7 @@ ipmi_lan_poll_single(struct ipmi_intf * intf) rsp = ipmi_lan_recv_packet(intf); /* check if no packet has come */ - if (rsp == NULL) { + if (!rsp) { return NULL; } @@ -653,7 +624,7 @@ ipmi_lan_poll_single(struct ipmi_intf * intf) if (rmcp_rsp->class == RMCP_CLASS_ASF) { /* might be ping response packet */ - rv = ipmi_handle_pong(intf, rsp); + rv = ipmi_handle_pong(rsp); return (rv <= 0) ? NULL : rsp; } @@ -683,7 +654,7 @@ ipmi_lan_poll_single(struct ipmi_intf * intf) * ------------------------------------------------------------------- */ - read_session_data(rsp, &offset, intf->session); + read_session_data(rsp, &offset); /* * Skip packets that are not intended for this session @@ -764,14 +735,12 @@ ipmi_lan_poll_single(struct ipmi_intf * intf) entry = ipmi_req_lookup_entry(rsp->payload.ipmi_response.rq_seq, rsp->payload.ipmi_response.cmd); - if (entry == NULL) { + if (!entry) { lprintf(LOG_INFO, "IPMI Request Match NOT FOUND"); /* read one more packet */ return (struct ipmi_rs *)1; }; - uint8_t target_cmd = entry->req.msg.target_cmd; - lprintf(LOG_DEBUG+2, "IPMI Request Match found"); if (entry->bridging_level) { @@ -791,12 +760,6 @@ ipmi_lan_poll_single(struct ipmi_intf * intf) printbuf(&rsp->data[offset], (rsp->data_len-offset-1), "bridge command response"); /* - * decrement payload size - * (cks2 for outer Send Message) - */ - payload_size--; - - /* * need to make a loop for embedded bridged response */ loop++; @@ -822,6 +785,9 @@ ipmi_lan_poll_single(struct ipmi_intf * intf) if (extra_data_length > 0) { rsp->data_len = extra_data_length; memmove(rsp->data, rsp->data + offset, extra_data_length); + offset = 0; + payload_start = 0; + payload_size = extra_data_length; } else { rsp->data_len = 0; } @@ -873,7 +839,7 @@ ipmi_lan_poll_single(struct ipmi_intf * intf) } read_sol_packet(rsp, &offset); extra_data_length = payload_size - (offset - payload_start); - if (rsp && extra_data_length > 0) { + if (extra_data_length > 0) { rsp->data_len = extra_data_length; memmove(rsp->data, rsp->data + offset, extra_data_length); } else { @@ -990,7 +956,7 @@ read_open_session_response(struct ipmi_rs * rsp, int offset) * * param rsp [in/out] reading from the data variable and writing to the rakp 2 * section - * param offset [in] tells us where hte rakp2 payload starts + * param offset [in] tells us where the rakp2 payload starts * param auth_alg [in] describes the authentication algorithm was agreed upon in * the open session request/response phase. We need to know that here so * that we know how many bytes (if any) to read fromt the packet. @@ -1011,31 +977,19 @@ read_rakp2_message( /* RAKP response code */ rsp->payload.rakp2_message.rakp_return_code = rsp->data[offset + 1]; - /* Console session ID */ - memcpy(&(rsp->payload.rakp2_message.console_id), - rsp->data + offset + 4, - 4); - #if WORDS_BIGENDIAN - rsp->payload.rakp2_message.console_id = - BSWAP_32(rsp->payload.rakp2_message.console_id); - #endif + /* Console session ID */ + rsp->payload.rakp2_message.console_id = ipmi32toh(&rsp->data[offset + 4]); - /* BMC random number */ - memcpy(&(rsp->payload.rakp2_message.bmc_rand), - rsp->data + offset + 8, - 16); - #if WORDS_BIGENDIAN - lanplus_swap(rsp->payload.rakp2_message.bmc_rand, 16); - #endif + /* BMC random number */ + memcpy(&(rsp->payload.rakp2_message.bmc_rand), + array_letoh(&rsp->data[offset + 8], 16), + 16); + + /* BMC GUID */ + memcpy(&(rsp->payload.rakp2_message.bmc_guid), + array_letoh(&rsp->data[offset + 24], 16), + 16); - /* BMC GUID */ - memcpy(&(rsp->payload.rakp2_message.bmc_guid), - rsp->data + offset + 24, - 16); - #if WORDS_BIGENDIAN - lanplus_swap(rsp->payload.rakp2_message.bmc_guid, 16); - #endif - /* Key exchange authentication code */ switch (auth_alg) { @@ -1089,7 +1043,7 @@ read_rakp2_message( * * param rsp [in/out] reading from the data variable and writing to the rakp * 4 section - * param offset [in] tells us where hte rakp4 payload starts + * param offset [in] tells us where the rakp4 payload starts * param integrity_alg [in] describes the authentication algorithm was * agreed upon in the open session request/response phase. We need * to know that here so that we know how many bytes (if any) to read @@ -1111,16 +1065,9 @@ read_rakp4_message( /* RAKP response code */ rsp->payload.rakp4_message.rakp_return_code = rsp->data[offset + 1]; - /* Console session ID */ - memcpy(&(rsp->payload.rakp4_message.console_id), - rsp->data + offset + 4, - 4); - #if WORDS_BIGENDIAN - rsp->payload.rakp4_message.console_id = - BSWAP_32(rsp->payload.rakp4_message.console_id); - #endif + /* Console session ID */ + rsp->payload.rakp4_message.console_id = ipmi32toh(&rsp->data[offset + 4]); - /* Integrity check value */ switch (auth_alg) { @@ -1178,21 +1125,19 @@ read_rakp4_message( * param offset [in/out] should point to the beginning of the session when * this function is called. The offset will be adjusted to * point to the end of the session when this function exits. - * param session holds our session state */ void read_session_data( struct ipmi_rs * rsp, - int * offset, - struct ipmi_session * s) + int * offset) { /* We expect to read different stuff depending on the authtype */ rsp->session.authtype = rsp->data[*offset]; if (rsp->session.authtype == IPMI_SESSION_AUTHTYPE_RMCP_PLUS) - read_session_data_v2x(rsp, offset, s); + read_session_data_v2x(rsp, offset); else - read_session_data_v15(rsp, offset, s); + read_session_data_v15(rsp, offset); } @@ -1218,8 +1163,7 @@ read_session_data( void read_session_data_v2x( struct ipmi_rs * rsp, - int * offset, - struct ipmi_session * s) + int * offset) { rsp->session.authtype = rsp->data[(*offset)++]; @@ -1231,25 +1175,15 @@ read_session_data_v2x( rsp->session.payloadtype = rsp->data[(*offset)++] & 0x3F; /* Session ID */ - memcpy(&rsp->session.id, rsp->data + *offset, 4); + rsp->session.id = ipmi32toh(&rsp->data[*offset]); *offset += 4; - #if WORDS_BIGENDIAN - rsp->session.id = BSWAP_32(rsp->session.id); - #endif - /* Ignored, so far */ - memcpy(&rsp->session.seq, rsp->data + *offset, 4); + rsp->session.seq = ipmi32toh(&rsp->data[*offset]); *offset += 4; - #if WORDS_BIGENDIAN - rsp->session.seq = BSWAP_32(rsp->session.seq); - #endif - memcpy(&rsp->session.msglen, rsp->data + *offset, 2); + rsp->session.msglen = ipmi16toh(&rsp->data[*offset]); *offset += 2; - #if WORDS_BIGENDIAN - rsp->session.msglen = BSWAP_16(rsp->session.msglen); - #endif } @@ -1257,7 +1191,7 @@ read_session_data_v2x( /* * read_session_data_v15 * - * Initialize the ipmi_rsp from the session header of the packet. + * Initialize the ipmi_rsp from the session header of the packet. * * The offset should point the first byte of the the IPMI session when this * function is called. When this function exits, the offset will point to @@ -1272,8 +1206,7 @@ read_session_data_v2x( */ void read_session_data_v15( struct ipmi_rs * rsp, - int * offset, - struct ipmi_session * s) + int * offset) { /* All v15 messages are IPMI messages */ rsp->session.payloadtype = IPMI_PAYLOAD_TYPE_IPMI; @@ -1537,7 +1470,6 @@ void getIpmiPayloadWireRep( * param payload [in] holds the v2 payload with our SOL data */ void getSolPayloadWireRep( - struct ipmi_intf * intf, /* in out */ uint8_t * msg, /* output */ struct ipmi_v2_payload * payload) /* input */ { @@ -1667,7 +1599,7 @@ ipmi_lanplus_build_v2x_msg( msg = malloc(len); - if (msg == NULL) { + if (!msg) { lprintf(LOG_ERR, "ipmitool: malloc failure"); return; } @@ -1743,7 +1675,7 @@ ipmi_lanplus_build_v2x_msg( break; case IPMI_PAYLOAD_TYPE_SOL: - getSolPayloadWireRep(intf, + getSolPayloadWireRep( msg + IPMI_LANPLUS_OFFSET_PAYLOAD, payload); @@ -1971,8 +1903,6 @@ ipmi_lanplus_build_v2x_ipmi_cmd( entry = ipmi_req_add_entry(intf, req, curr_seq); /* it's a bridge command */ } else { - unsigned char backup_cmd; - /* Add entry for cmd */ entry = ipmi_req_add_entry(intf, req, curr_seq); @@ -1988,7 +1918,7 @@ ipmi_lanplus_build_v2x_ipmi_cmd( } } - if (entry == NULL) + if (!entry) return NULL; // Build our payload @@ -2054,13 +1984,13 @@ ipmi_lanplus_build_v15_ipmi_cmd( struct ipmi_rq_entry * entry; entry = ipmi_req_add_entry(intf, req, 0); - if (entry == NULL) + if (!entry) return NULL; len = req->msg.data_len + 21; msg = malloc(len); - if (msg == NULL) { + if (!msg) { lprintf(LOG_ERR, "ipmitool: malloc failure"); return NULL; } @@ -2251,7 +2181,7 @@ ipmi_lanplus_send_payload( entry = ipmi_lanplus_build_v2x_ipmi_cmd(intf, ipmi_request, isRetry); } - if (entry == NULL) { + if (!entry) { lprintf(LOG_ERR, "Aborting send command, unable to build"); return NULL; } @@ -2397,7 +2327,7 @@ ipmi_lanplus_send_payload( /* Duplicate Request ccode most likely indicates a response to a previous retry. Ignore and keep polling. */ - while ((rsp != NULL) && (rsp->ccode == 0xcf)) + while (rsp && rsp->ccode == 0xcf) { rsp = NULL; rsp = ipmi_lan_poll_recv(intf); @@ -2584,7 +2514,6 @@ ipmi_lanplus_send_sol( */ static int check_sol_packet_for_new_data( - struct ipmi_intf * intf, struct ipmi_rs *rsp) { static uint8_t last_received_sequence_number = 0; @@ -2623,7 +2552,7 @@ check_sol_packet_for_new_data( /* - *Rember the data for next round + * Remember the data for next round */ if (rsp->payload.sol_packet.packet_sequence_number) { @@ -2700,7 +2629,7 @@ ipmi_lanplus_recv_sol(struct ipmi_intf * intf) * Remembers the data sent, and alters the data to just * include the new stuff. */ - check_sol_packet_for_new_data(intf, rsp); + check_sol_packet_for_new_data(rsp); } return rsp; } @@ -2770,7 +2699,7 @@ ipmi_get_auth_capabilities_cmd( rsp = intf->sendrecv(intf, &req); - if (rsp == NULL || rsp->ccode > 0) { + if (!rsp || rsp->ccode) { /* * It's very possible that this failed because we asked for IPMI * v2 data. Ask again, without requesting IPMI v2 data. @@ -2779,11 +2708,11 @@ ipmi_get_auth_capabilities_cmd( rsp = intf->sendrecv(intf, &req); - if (rsp == NULL) { + if (!rsp) { lprintf(LOG_INFO, "Get Auth Capabilities error"); return 1; } - if (rsp->ccode > 0) { + if (rsp->ccode) { lprintf(LOG_INFO, "Get Auth Capabilities error: %s", val2str(rsp->ccode, completion_code_vals)); return 1; @@ -2808,10 +2737,9 @@ ipmi_close_session_cmd(struct ipmi_intf * intf) struct ipmi_rs * rsp; struct ipmi_rq req; uint8_t msg_data[4]; - uint32_t bmc_session_lsbf; uint8_t backupBridgePossible; - if (intf->session == NULL + if (!intf->session || intf->session->v2_data.session_state != LANPLUS_STATE_ACTIVE) return -1; @@ -2820,12 +2748,7 @@ ipmi_close_session_cmd(struct ipmi_intf * intf) intf->target_addr = IPMI_BMC_SLAVE_ADDR; bridgePossible = 0; - bmc_session_lsbf = intf->session->v2_data.bmc_id; -#if WORDS_BIGENDIAN - bmc_session_lsbf = BSWAP_32(bmc_session_lsbf); -#endif - - memcpy(&msg_data, &bmc_session_lsbf, 4); + htoipmi32(intf->session->v2_data.bmc_id, msg_data); memset(&req, 0, sizeof(req)); req.msg.netfn = IPMI_NETFN_APP; @@ -2834,7 +2757,7 @@ ipmi_close_session_cmd(struct ipmi_intf * intf) req.msg.data_len = 4; rsp = intf->sendrecv(intf, &req); - if (rsp == NULL) { + if (!rsp) { /* Looks like the session was closed */ lprintf(LOG_ERR, "Close Session command failed"); return -1; @@ -2848,7 +2771,7 @@ ipmi_close_session_cmd(struct ipmi_intf * intf) (long)intf->session->v2_data.bmc_id); return -1; } - if (rsp->ccode > 0) { + if (rsp->ccode) { lprintf(LOG_ERR, "Close Session command failed: %s", val2str(rsp->ccode, completion_code_vals)); return -1; @@ -2885,7 +2808,7 @@ ipmi_lanplus_open_session(struct ipmi_intf * intf) * Build an Open Session Request Payload */ msg = (uint8_t*)malloc(IPMI_OPEN_SESSION_REQUEST_SIZE); - if (msg == NULL) { + if (!msg) { lprintf(LOG_ERR, "ipmitool: malloc failure"); return 1; } @@ -2966,7 +2889,7 @@ ipmi_lanplus_open_session(struct ipmi_intf * intf) free(msg); msg = NULL; - if (rsp == NULL ) { + if (!rsp ) { lprintf(LOG_DEBUG, "Timeout in open session response message."); return 2; } @@ -3071,7 +2994,7 @@ ipmi_lanplus_rakp1(struct ipmi_intf * intf) * Build a RAKP 1 message */ msg = (uint8_t*)malloc(IPMI_RAKP1_MESSAGE_SIZE); - if (msg == NULL) { + if (!msg) { lprintf(LOG_ERR, "ipmitool: malloc failure"); return 1; } @@ -3102,9 +3025,7 @@ ipmi_lanplus_rakp1(struct ipmi_intf * intf) return 1; } memcpy(msg + 8, session->v2_data.console_rand, 16); - #if WORDS_BIGENDIAN - lanplus_swap(msg + 8, 16); - #endif + array_letoh(msg + 8, 16); if (verbose > 1) printbuf(session->v2_data.console_rand, 16, @@ -3152,7 +3073,7 @@ ipmi_lanplus_rakp1(struct ipmi_intf * intf) free(msg); msg = NULL; - if (rsp == NULL) + if (!rsp) { lprintf(LOG_WARNING, "> Error: no response from RAKP 1 message"); return 2; @@ -3236,7 +3157,7 @@ ipmi_lanplus_rakp3(struct ipmi_intf * intf) * Build a RAKP 3 message */ msg = (uint8_t*)malloc(IPMI_RAKP3_MESSAGE_MAX_SIZE); - if (msg == NULL) { + if (!msg) { lprintf(LOG_ERR, "ipmitool: malloc failure"); return 1; } @@ -3325,7 +3246,7 @@ ipmi_lanplus_rakp3(struct ipmi_intf * intf) */ return 1; } - else if (rsp == NULL) + else if (!rsp) { lprintf(LOG_WARNING, "> Error: no response from RAKP 3 message"); return 2; @@ -3416,7 +3337,7 @@ ipmi_set_session_privlvl_cmd(struct ipmi_intf * intf) req.msg.data_len = 1; rsp = intf->sendrecv(intf, &req); - if (rsp == NULL) { + if (!rsp) { lprintf(LOG_ERR, "Set Session Privilege Level to %s failed", val2str(privlvl, ipmi_privlvl_vals)); bridgePossible = backupBridgePossible; @@ -3425,7 +3346,7 @@ ipmi_set_session_privlvl_cmd(struct ipmi_intf * intf) if (verbose > 2) printbuf(rsp->data, rsp->data_len, "set_session_privlvl"); - if (rsp->ccode > 0) { + if (rsp->ccode) { lprintf(LOG_ERR, "Set Session Privilege Level to %s failed: %s", val2str(privlvl, ipmi_privlvl_vals), val2str(rsp->ccode, completion_code_vals)); @@ -3441,6 +3362,62 @@ ipmi_set_session_privlvl_cmd(struct ipmi_intf * intf) return 0; } +static uint8_t +ipmi_find_best_cipher_suite(struct ipmi_intf *intf) +{ + enum cipher_suite_ids best_suite = IPMI_LANPLUS_CIPHER_SUITE_RESERVED; +#ifdef HAVE_CRYPTO_SHA256 + struct cipher_suite_info suites[MAX_CIPHER_SUITE_COUNT]; + size_t nr_suites = ARRAY_SIZE(suites); + + /* cipher suite best order is chosen with this criteria: + * HMAC-MD5 and MD5 are BAD; xRC4 is bad; AES128 is required + * HMAC-SHA256 > HMAC-SHA1 + * secure authentication > encrypted content + * + * With xRC4 out, all cipher suites with MD5 out, and cipher suite 3 + * being required by the spec, the only better defined standard cipher + * suite is 17. So if SHA256 is available, we should try to use that, + * otherwise, fall back to 3. + */ + const enum cipher_suite_ids cipher_order_preferred[] = { + IPMI_LANPLUS_CIPHER_SUITE_17, + IPMI_LANPLUS_CIPHER_SUITE_3, + }; + const size_t nr_preferred = ARRAY_SIZE(cipher_order_preferred); + size_t ipref, i; + + if (ipmi_get_channel_cipher_suites(intf, "ipmi", IPMI_LAN_CHANNEL_E, + suites, &nr_suites) < 0) + { + /* default legacy behavior - fall back to cipher suite 3 */ + return IPMI_LANPLUS_CIPHER_SUITE_3; + } + for (ipref = 0; + ipref < nr_preferred && + IPMI_LANPLUS_CIPHER_SUITE_RESERVED == best_suite; + ipref++) + { + for (i = 0; i < nr_suites; i++) { + if (cipher_order_preferred[ipref] + == suites[i].cipher_suite_id) + { + best_suite = cipher_order_preferred[ipref]; + break; + } + } + } +#endif /* HAVE_CRYPTO_SHA256 */ + if (IPMI_LANPLUS_CIPHER_SUITE_RESERVED == best_suite) { + /* IPMI 2.0 spec requires that cipher suite 3 is implemented + * so we should always be able to fall back to that if better + * options are not available. */ + best_suite = IPMI_LANPLUS_CIPHER_SUITE_3; + } + lprintf(LOG_INFO, "Using best available cipher suite %d\n", best_suite); + return best_suite; +} + /** * ipmi_lanplus_open */ @@ -3470,7 +3447,7 @@ ipmi_lanplus_open(struct ipmi_intf * intf) if (!params->retry) params->retry = IPMI_LAN_RETRY; - if (params->hostname == NULL || strlen((const char *)params->hostname) == 0) { + if (!params->hostname || strlen((const char *)params->hostname) == 0) { lprintf(LOG_ERR, "No hostname specified!"); return -1; } @@ -3491,7 +3468,9 @@ ipmi_lanplus_open(struct ipmi_intf * intf) /* Setup our lanplus session state */ memset(session, 0, sizeof(struct ipmi_session)); session->timeout = params->timeout; - memcpy(&session->authcode, ¶ms->authcode_set, sizeof(session->authcode)); + memcpy(&session->authcode, + ¶ms->authcode_set, + sizeof(session->authcode)); session->v2_data.auth_alg = IPMI_AUTH_RAKP_NONE; session->v2_data.crypt_alg = IPMI_CRYPT_NONE; session->sol_data.sequence_number = 1; @@ -3510,15 +3489,30 @@ ipmi_lanplus_open(struct ipmi_intf * intf) goto fail; } - if (!ipmi_oem_active(intf, "i82571spt") && ! auth_cap.v20_data_available) { + if (!ipmi_oem_active(intf, "i82571spt") && + !auth_cap.v20_data_available) + { lprintf(LOG_INFO, "This BMC does not support IPMI v2 / RMCP+"); goto fail; } /* - * If the open/rakp1/rakp3 sequence encounters a timeout, the whole sequence - * needs to restart. The individual messages are not individually retryable, - * as the session state is advancing. + * If no cipher suite was provided, query the channel cipher suite list + * and pick the best one available + */ + if (IPMI_LANPLUS_CIPHER_SUITE_RESERVED == + intf->ssn_params.cipher_suite_id) + { + ipmi_intf_session_set_cipher_suite_id( + intf, + ipmi_find_best_cipher_suite(intf) + ); + } + + /* + * If the open/rakp1/rakp3 sequence encounters a timeout, the whole + * sequence needs to restart. The individual messages are not + * individually retryable, as the session state is advancing. */ for (retry = 0; retry < IPMI_LAN_RETRY; retry++) { session->v2_data.session_state = LANPLUS_STATE_PRESESSION; @@ -3687,21 +3681,19 @@ ipmi_lanplus_keepalive(struct ipmi_intf * intf) return 0; rsp = intf->sendrecv(intf, &req); - while (rsp != NULL && is_sol_packet(rsp)) { + while (rsp && is_sol_packet(rsp)) { /* rsp was SOL data instead of our answer */ /* since it didn't go through the sol recv, do sol recv stuff here */ ack_sol_packet(intf, rsp); - check_sol_packet_for_new_data(intf, rsp); + check_sol_packet_for_new_data(rsp); if (rsp->data_len) intf->session->sol_data.sol_input_handler(rsp); rsp = ipmi_lan_poll_recv(intf); - if (rsp == NULL) /* the get device id answer never got back, but retry mechanism was bypassed by SOL data */ + if (!rsp) /* the get device id answer never got back, but retry mechanism was bypassed by SOL data */ return 0; /* so get device id command never returned, the connection is still alive */ } - if (rsp == NULL) - return -1; - if (rsp->ccode > 0) + if (!rsp || rsp->ccode) return -1; return 0; @@ -3728,7 +3720,7 @@ static int ipmi_lanplus_setup(struct ipmi_intf * intf) static void ipmi_lanp_set_max_rq_data_size(struct ipmi_intf * intf, uint16_t size) { - if (intf->ssn_params.cipher_suite_id == 3) { + if (intf->ssn_params.cipher_suite_id == IPMI_LANPLUS_CIPHER_SUITE_3) { /* * encrypted payload can only be multiple of 16 bytes */ @@ -3746,7 +3738,7 @@ static void ipmi_lanp_set_max_rq_data_size(struct ipmi_intf * intf, uint16_t siz static void ipmi_lanp_set_max_rp_data_size(struct ipmi_intf * intf, uint16_t size) { - if (intf->ssn_params.cipher_suite_id == 3) { + if (intf->ssn_params.cipher_suite_id == IPMI_LANPLUS_CIPHER_SUITE_3) { /* * encrypted payload can only be multiple of 16 bytes */ diff --git a/src/plugins/lanplus/lanplus.h b/src/plugins/lanplus/lanplus.h index d967462..3e287ae 100644 --- a/src/plugins/lanplus/lanplus.h +++ b/src/plugins/lanplus/lanplus.h @@ -30,8 +30,7 @@ * EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. */ -#ifndef IPMI_LANPLUS_H -#define IPMI_LANPLUS_H +#pragma once #include <ipmitool/ipmi.h> @@ -113,7 +112,7 @@ /* *This is accurate, as long as we're only passing 1 auth algorithm, - * one integrity algorithm, and 1 encyrption alogrithm + * one integrity algorithm, and 1 encyrption algorithm */ #define IPMI_OPEN_SESSION_REQUEST_SIZE 32 #define IPMI_RAKP1_MESSAGE_SIZE 44 @@ -130,5 +129,3 @@ struct ipmi_rs * ipmi_lan_send_cmd(struct ipmi_intf * intf, struct ipmi_rq * req int ipmi_lanplus_open(struct ipmi_intf * intf); void ipmi_lanplus_close(struct ipmi_intf * intf); int ipmiv2_lan_ping(struct ipmi_intf * intf); - -#endif /*IPMI_LAN_H*/ diff --git a/src/plugins/lanplus/lanplus_crypt.c b/src/plugins/lanplus/lanplus_crypt.c index cb963f4..b4d677b 100644 --- a/src/plugins/lanplus/lanplus_crypt.c +++ b/src/plugins/lanplus/lanplus_crypt.c @@ -84,12 +84,16 @@ lanplus_rakp2_hmac_matches(const struct ipmi_session * session, return 1; /* We don't yet support other algorithms */ +#ifdef HAVE_CRYPTO_SHA256 // assert() is a macro, must not put #ifdef inside it assert((session->v2_data.auth_alg == IPMI_AUTH_RAKP_HMAC_SHA1) || (session->v2_data.auth_alg == IPMI_AUTH_RAKP_HMAC_MD5) -#ifdef HAVE_CRYPTO_SHA256 || (session->v2_data.auth_alg == IPMI_AUTH_RAKP_HMAC_SHA256) -#endif /* HAVE_CRYPTO_SHA256 */ ); +#else + assert((session->v2_data.auth_alg == IPMI_AUTH_RAKP_HMAC_SHA1) + || (session->v2_data.auth_alg == IPMI_AUTH_RAKP_HMAC_MD5) + ); +#endif /* HAVE_CRYPTO_SHA256 */ bufferLength = @@ -103,7 +107,7 @@ lanplus_rakp2_hmac_matches(const struct ipmi_session * session, strlen((const char *)intf->ssn_params.username); /* optional */ buffer = malloc(bufferLength); - if (buffer == NULL) { + if (!buffer) { lprintf(LOG_ERR, "ipmitool: malloc failure"); return 1; } @@ -251,12 +255,16 @@ lanplus_rakp4_hmac_matches(const struct ipmi_session * session, return 1; /* We don't yet support other algorithms */ +#ifdef HAVE_CRYPTO_SHA256 // assert() is a macro, must not put #ifdef inside it assert((session->v2_data.auth_alg == IPMI_AUTH_RAKP_HMAC_SHA1) || (session->v2_data.auth_alg == IPMI_AUTH_RAKP_HMAC_MD5) -#ifdef HAVE_CRYPTO_SHA256 || (session->v2_data.auth_alg == IPMI_AUTH_RAKP_HMAC_SHA256) -#endif /* HAVE_CRYPTO_SHA256 */ ); +#else + assert((session->v2_data.auth_alg == IPMI_AUTH_RAKP_HMAC_SHA1) + || (session->v2_data.auth_alg == IPMI_AUTH_RAKP_HMAC_MD5) + ); +#endif /* HAVE_CRYPTO_SHA256 */ } bufferLength = @@ -265,7 +273,7 @@ lanplus_rakp4_hmac_matches(const struct ipmi_session * session, 16; /* GUIDc */ buffer = (uint8_t *)malloc(bufferLength); - if (buffer == NULL) { + if (!buffer) { lprintf(LOG_ERR, "ipmitool: malloc failure"); return 1; } @@ -417,12 +425,16 @@ lanplus_generate_rakp3_authcode(uint8_t * output_buffer, } /* We don't yet support other algorithms */ +#ifdef HAVE_CRYPTO_SHA256 // assert() is a macro, must not put #ifdef inside it assert((session->v2_data.auth_alg == IPMI_AUTH_RAKP_HMAC_SHA1) || (session->v2_data.auth_alg == IPMI_AUTH_RAKP_HMAC_MD5) -#ifdef HAVE_CRYPTO_SHA256 || (session->v2_data.auth_alg == IPMI_AUTH_RAKP_HMAC_SHA256) -#endif /* HAVE_CRYPTO_SHA256 */ ); +#else + assert((session->v2_data.auth_alg == IPMI_AUTH_RAKP_HMAC_SHA1) + || (session->v2_data.auth_alg == IPMI_AUTH_RAKP_HMAC_MD5) + ); +#endif /* HAVE_CRYPTO_SHA256 */ input_buffer_length = 16 + /* Rc */ @@ -432,7 +444,7 @@ lanplus_generate_rakp3_authcode(uint8_t * output_buffer, strlen((const char *)intf->ssn_params.username); input_buffer = malloc(input_buffer_length); - if (input_buffer == NULL) { + if (!input_buffer) { lprintf(LOG_ERR, "ipmitool: malloc failure"); return 1; } @@ -512,7 +524,7 @@ lanplus_generate_rakp3_authcode(uint8_t * output_buffer, * <USERNAME> - Usename (absent for null usernames) * * The key used to generated the SIK is Kg if Kg is not null (two-key logins are - * enabled). Otherwise Kuid (the user authcode) is used as the key to genereate + * enabled). Otherwise Kuid (the user authcode) is used as the key to generate * the SIK. * * I am aware that the subscripts look backwards, but that is the way they are @@ -539,12 +551,16 @@ lanplus_generate_sik(struct ipmi_session * session, struct ipmi_intf * intf) return 0; /* We don't yet support other algorithms */ +#ifdef HAVE_CRYPTO_SHA256 // assert() is a macro, must not put #ifdef inside it assert((session->v2_data.auth_alg == IPMI_AUTH_RAKP_HMAC_SHA1) || (session->v2_data.auth_alg == IPMI_AUTH_RAKP_HMAC_MD5) -#ifdef HAVE_CRYPTO_SHA256 || (session->v2_data.auth_alg == IPMI_AUTH_RAKP_HMAC_SHA256) -#endif /* HAVE_CRYPTO_SHA256 */ ); +#else + assert((session->v2_data.auth_alg == IPMI_AUTH_RAKP_HMAC_SHA1) + || (session->v2_data.auth_alg == IPMI_AUTH_RAKP_HMAC_MD5) + ); +#endif /* HAVE_CRYPTO_SHA256 */ input_buffer_length = 16 + /* Rm */ @@ -554,7 +570,7 @@ lanplus_generate_sik(struct ipmi_session * session, struct ipmi_intf * intf) strlen((const char *)intf->ssn_params.username); input_buffer = malloc(input_buffer_length); - if (input_buffer == NULL) { + if (!input_buffer) { lprintf(LOG_ERR, "ipmitool: malloc failure"); return 1; } @@ -836,7 +852,7 @@ lanplus_encrypt_payload(uint8_t crypt_alg, pad_length = IPMI_CRYPT_AES_CBC_128_BLOCK_SIZE - mod; padded_input = (uint8_t*)malloc(input_length + pad_length + 1); - if (padded_input == NULL) { + if (!padded_input) { lprintf(LOG_ERR, "ipmitool: malloc failure"); return 1; } @@ -853,7 +869,7 @@ lanplus_encrypt_payload(uint8_t crypt_alg, if (lanplus_rand(output, IPMI_CRYPT_AES_CBC_128_BLOCK_SIZE)) { lprintf(LOG_ERR, "lanplus_encrypt_payload: Error generating IV"); - if (padded_input != NULL) { + if (padded_input) { free(padded_input); padded_input = NULL; } @@ -897,7 +913,7 @@ lanplus_encrypt_payload(uint8_t crypt_alg, * * The authcode is computed using the specified integrity algorithm starting * with the AuthType / Format field, and ending with the field immediately - * preceeding the authcode itself. + * preceding the authcode itself. * * The key key used to generate the authcode MAC is K1. * @@ -1003,7 +1019,7 @@ lanplus_decrypt_payload(uint8_t crypt_alg, const uint8_t * key, assert(crypt_alg == IPMI_CRYPT_AES_CBC_128); decrypted_payload = (uint8_t*)malloc(input_length); - if (decrypted_payload == NULL) { + if (!decrypted_payload) { lprintf(LOG_ERR, "ipmitool: malloc failure"); return 1; } @@ -1029,7 +1045,7 @@ lanplus_decrypt_payload(uint8_t crypt_alg, const uint8_t * key, bytes_decrypted); /* - * We have to determine the payload size, by substracting the padding, etc. + * We have to determine the payload size, by subtracting the padding, etc. * The last byte of the decrypted payload is the confidentiality pad length. */ conf_pad_length = decrypted_payload[bytes_decrypted - 1]; diff --git a/src/plugins/lanplus/lanplus_crypt.h b/src/plugins/lanplus/lanplus_crypt.h index d69cc9b..1c306dd 100644 --- a/src/plugins/lanplus/lanplus_crypt.h +++ b/src/plugins/lanplus/lanplus_crypt.h @@ -30,8 +30,7 @@ * EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. */ -#ifndef IPMI_LANPLUS_CRYPT_H -#define IPMI_LANPLUS_CRYPT_H +#pragma once #include <ipmitool/ipmi_intf.h> @@ -68,8 +67,3 @@ int lanplus_decrypt_payload(uint8_t crypt_alg, uint16_t * payload_size); int lanplus_has_valid_auth_code(struct ipmi_rs * rs, struct ipmi_session * session); - - - - -#endif /* IPMI_LANPLUS_CRYPT_H */ diff --git a/src/plugins/lanplus/lanplus_crypt_impl.c b/src/plugins/lanplus/lanplus_crypt_impl.c index 9652a5e..7603e6d 100644 --- a/src/plugins/lanplus/lanplus_crypt_impl.c +++ b/src/plugins/lanplus/lanplus_crypt_impl.c @@ -102,7 +102,7 @@ lanplus_rand(uint8_t * buffer, uint32_t num_bytes) * param mac specifies the algorithm to be used, currently SHA1, SHA256 and MD5 * are supported * param key is the key used for HMAC generation - * param key_len is the lenght of key + * param key_len is the length of key * param d is the data to be MAC'd * param n is the length of the data at d * param md is the result of the HMAC algorithm @@ -179,11 +179,15 @@ lanplus_encrypt_aes_cbc_128(const uint8_t * iv, } ctx = EVP_CIPHER_CTX_new(); - if (ctx == NULL) { + if (!ctx) { lprintf(LOG_DEBUG, "ERROR: EVP_CIPHER_CTX_new() failed"); return; } +#if OPENSSL_VERSION_NUMBER < 0x10100000L EVP_CIPHER_CTX_init(ctx); +#else + EVP_CIPHER_CTX_reset(ctx); +#endif EVP_EncryptInit_ex(ctx, EVP_aes_128_cbc(), NULL, key, iv); EVP_CIPHER_CTX_set_padding(ctx, 0); @@ -258,11 +262,15 @@ lanplus_decrypt_aes_cbc_128(const uint8_t * iv, return; ctx = EVP_CIPHER_CTX_new(); - if (ctx == NULL) { + if (!ctx) { lprintf(LOG_DEBUG, "ERROR: EVP_CIPHER_CTX_new() failed"); return; } +#if OPENSSL_VERSION_NUMBER < 0x10100000L EVP_CIPHER_CTX_init(ctx); +#else + EVP_CIPHER_CTX_reset(ctx); +#endif EVP_DecryptInit_ex(ctx, EVP_aes_128_cbc(), NULL, key, iv); EVP_CIPHER_CTX_set_padding(ctx, 0); diff --git a/src/plugins/lanplus/lanplus_crypt_impl.h b/src/plugins/lanplus/lanplus_crypt_impl.h index ff534bc..a48c6b7 100644 --- a/src/plugins/lanplus/lanplus_crypt_impl.h +++ b/src/plugins/lanplus/lanplus_crypt_impl.h @@ -30,9 +30,7 @@ * EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. */ -#ifndef IPMI_LANPLUS_CRYPT_IMPL_H -#define IPMI_LANPLUS_CRYPT_IMPL_H - +#pragma once int lanplus_seed_prng(uint32_t bytes); @@ -61,6 +59,3 @@ lanplus_decrypt_aes_cbc_128(const uint8_t * iv, uint32_t input_length, uint8_t * output, uint32_t * bytes_written); - - -#endif /* IPMI_LANPLUS_CRYPT_IMPL_H */ diff --git a/src/plugins/lanplus/lanplus_dump.h b/src/plugins/lanplus/lanplus_dump.h index 4e29ebb..d4c8a8d 100644 --- a/src/plugins/lanplus/lanplus_dump.h +++ b/src/plugins/lanplus/lanplus_dump.h @@ -30,9 +30,7 @@ * EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. */ - -#ifndef IPMI_LANPLUS_DUMP_H -#define IPMI_LANPLUS_DUMP_H +#pragma once #include <ipmitool/ipmi_intf.h> @@ -40,6 +38,3 @@ void lanplus_dump_open_session_response(const struct ipmi_rs * rsp); void lanplus_dump_rakp2_message(const struct ipmi_rs * rsp, uint8_t auth_alg); void lanplus_dump_rakp4_message(const struct ipmi_rs * rsp, uint8_t auth_alg); - - -#endif /* IPMI_LANPLUS_DUMP_H */ diff --git a/src/plugins/lanplus/rmcp.h b/src/plugins/lanplus/rmcp.h index 51dc44d..df07f2f 100644 --- a/src/plugins/lanplus/rmcp.h +++ b/src/plugins/lanplus/rmcp.h @@ -30,8 +30,7 @@ * EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. */ -#ifndef IPMI_RMCP_H -#define IPMI_RMCP_H +#pragma once #include <ipmitool/helper.h> #include "lanplus.h" @@ -45,24 +44,11 @@ #define RMCP_TYPE_NORM 0x00 #define RMCP_TYPE_ACK 0x01 -static const struct valstr rmcp_type_vals[] __attribute__((unused)) = { - { RMCP_TYPE_NORM, "Normal RMCP" }, - { RMCP_TYPE_ACK, "RMCP ACK" }, - { 0, NULL } -}; - #define RMCP_CLASS_MASK 0x1f #define RMCP_CLASS_ASF 0x06 #define RMCP_CLASS_IPMI 0x07 #define RMCP_CLASS_OEM 0x08 -static const struct valstr rmcp_class_vals[] __attribute__((unused)) = { - { RMCP_CLASS_ASF, "ASF" }, - { RMCP_CLASS_IPMI, "IPMI" }, - { RMCP_CLASS_OEM, "OEM" }, - { 0, NULL } -}; - /* RMCP message header */ #ifdef HAVE_PRAGMA_PACK #pragma pack(1) @@ -78,5 +64,3 @@ struct rmcp_hdr { #endif int handle_rmcp(struct ipmi_intf * intf, uint8_t * data, int data_len); - -#endif /* IPMI_RMCP_H */ diff --git a/src/plugins/lipmi/Makefile.in b/src/plugins/lipmi/Makefile.in deleted file mode 100644 index be4996d..0000000 --- a/src/plugins/lipmi/Makefile.in +++ /dev/null @@ -1,637 +0,0 @@ -# Makefile.in generated by automake 1.14.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994-2013 Free Software Foundation, Inc. - -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -# Copyright (c) 2003 Sun Microsystems, Inc. All Rights Reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# Redistribution of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# -# Redistribution in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in the -# documentation and/or other materials provided with the distribution. -# -# Neither the name of Sun Microsystems, Inc. or the names of -# contributors may be used to endorse or promote products derived -# from this software without specific prior written permission. -# -# This software is provided "AS IS," without a warranty of any kind. -# ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, -# INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A -# PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY EXCLUDED. -# SUN MICROSYSTEMS, INC. ("SUN") AND ITS LICENSORS SHALL NOT BE LIABLE -# FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING -# OR DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES. IN NO EVENT WILL -# SUN OR ITS LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA, -# OR FOR DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR -# PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF -# LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE, -# EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. - -VPATH = @srcdir@ -am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' -am__make_running_with_option = \ - case $${target_option-} in \ - ?) ;; \ - *) echo "am__make_running_with_option: internal error: invalid" \ - "target option '$${target_option-}' specified" >&2; \ - exit 1;; \ - esac; \ - has_opt=no; \ - sane_makeflags=$$MAKEFLAGS; \ - if $(am__is_gnu_make); then \ - sane_makeflags=$$MFLAGS; \ - else \ - case $$MAKEFLAGS in \ - *\\[\ \ ]*) \ - bs=\\; \ - sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ - | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ - esac; \ - fi; \ - skip_next=no; \ - strip_trailopt () \ - { \ - flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ - }; \ - for flg in $$sane_makeflags; do \ - test $$skip_next = yes && { skip_next=no; continue; }; \ - case $$flg in \ - *=*|--*) continue;; \ - -*I) strip_trailopt 'I'; skip_next=yes;; \ - -*I?*) strip_trailopt 'I';; \ - -*O) strip_trailopt 'O'; skip_next=yes;; \ - -*O?*) strip_trailopt 'O';; \ - -*l) strip_trailopt 'l'; skip_next=yes;; \ - -*l?*) strip_trailopt 'l';; \ - -[dEDm]) skip_next=yes;; \ - -[JT]) skip_next=yes;; \ - esac; \ - case $$flg in \ - *$$target_option*) has_opt=yes; break;; \ - esac; \ - done; \ - test $$has_opt = yes -am__make_dryrun = (target_option=n; $(am__make_running_with_option)) -am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -target_triplet = @target@ -subdir = src/plugins/lipmi -DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ - $(top_srcdir)/depcomp -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(install_sh) -d -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -LTLIBRARIES = $(noinst_LTLIBRARIES) -libintf_lipmi_la_DEPENDENCIES = $(top_builddir)/lib/libipmitool.la -am_libintf_lipmi_la_OBJECTS = lipmi.lo -libintf_lipmi_la_OBJECTS = $(am_libintf_lipmi_la_OBJECTS) -AM_V_lt = $(am__v_lt_@AM_V@) -am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@) -am__v_lt_0 = --silent -am__v_lt_1 = -AM_V_P = $(am__v_P_@AM_V@) -am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) -am__v_P_0 = false -am__v_P_1 = : -AM_V_GEN = $(am__v_GEN_@AM_V@) -am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) -am__v_GEN_0 = @echo " GEN " $@; -am__v_GEN_1 = -AM_V_at = $(am__v_at_@AM_V@) -am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) -am__v_at_0 = @ -am__v_at_1 = -DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) -depcomp = $(SHELL) $(top_srcdir)/depcomp -am__depfiles_maybe = depfiles -am__mv = mv -f -COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ - $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ - $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \ - $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ - $(AM_CFLAGS) $(CFLAGS) -AM_V_CC = $(am__v_CC_@AM_V@) -am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@) -am__v_CC_0 = @echo " CC " $@; -am__v_CC_1 = -CCLD = $(CC) -LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ - $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ - $(AM_LDFLAGS) $(LDFLAGS) -o $@ -AM_V_CCLD = $(am__v_CCLD_@AM_V@) -am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@) -am__v_CCLD_0 = @echo " CCLD " $@; -am__v_CCLD_1 = -SOURCES = $(libintf_lipmi_la_SOURCES) -DIST_SOURCES = $(libintf_lipmi_la_SOURCES) -am__can_run_installinfo = \ - case $$AM_UPDATE_INFO_DIR in \ - n|no|NO) false;; \ - *) (install-info --version) >/dev/null 2>&1;; \ - esac -am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) -# Read a list of newline-separated strings from the standard input, -# and print each of them once, without duplicates. Input order is -# *not* preserved. -am__uniquify_input = $(AWK) '\ - BEGIN { nonempty = 0; } \ - { items[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in items) print i; }; } \ -' -# Make sure the list of sources is unique. This is necessary because, -# e.g., the same source file might be shared among _SOURCES variables -# for different programs/libraries. -am__define_uniq_tagged_files = \ - list='$(am__tagged_files)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | $(am__uniquify_input)` -ETAGS = etags -CTAGS = ctags -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -ARCH = @ARCH@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BASEDIR = @BASEDIR@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DISTRO = @DISTRO@ -DLLTOOL = @DLLTOOL@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FGREP = @FGREP@ -GREP = @GREP@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INTF_BMC = @INTF_BMC@ -INTF_BMC_LIB = @INTF_BMC_LIB@ -INTF_DUMMY = @INTF_DUMMY@ -INTF_DUMMY_LIB = @INTF_DUMMY_LIB@ -INTF_FREE = @INTF_FREE@ -INTF_FREE_LIB = @INTF_FREE_LIB@ -INTF_IMB = @INTF_IMB@ -INTF_IMB_LIB = @INTF_IMB_LIB@ -INTF_LAN = @INTF_LAN@ -INTF_LANPLUS = @INTF_LANPLUS@ -INTF_LANPLUS_LIB = @INTF_LANPLUS_LIB@ -INTF_LAN_LIB = @INTF_LAN_LIB@ -INTF_LIPMI = @INTF_LIPMI@ -INTF_LIPMI_LIB = @INTF_LIPMI_LIB@ -INTF_OPEN = @INTF_OPEN@ -INTF_OPEN_LIB = @INTF_OPEN_LIB@ -INTF_SERIAL = @INTF_SERIAL@ -INTF_SERIAL_LIB = @INTF_SERIAL_LIB@ -INTF_USB = @INTF_USB@ -INTF_USB_LIB = @INTF_USB_LIB@ -IPMITOOL_INTF_LIB = @IPMITOOL_INTF_LIB@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ -MKDIR_P = @MKDIR_P@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OS = @OS@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -POW_LIB = @POW_LIB@ -PSTAMP = @PSTAMP@ -RANLIB = @RANLIB@ -RPMBUILD = @RPMBUILD@ -RPM_RELEASE = @RPM_RELEASE@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -VERSION = @VERSION@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_configure_args = @ac_configure_args@ -ac_ct_AR = @ac_ct_AR@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target = @target@ -target_alias = @target_alias@ -target_cpu = @target_cpu@ -target_os = @target_os@ -target_vendor = @target_vendor@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -MAINTAINERCLEANFILES = Makefile.in -AM_CPPFLAGS = -I$(top_srcdir)/include -EXTRA_LTLIBRARIES = libintf_lipmi.la -noinst_LTLIBRARIES = @INTF_LIPMI_LIB@ -libintf_lipmi_la_LIBADD = $(top_builddir)/lib/libipmitool.la -libintf_lipmi_la_SOURCES = lipmi.c -all: all-am - -.SUFFIXES: -.SUFFIXES: .c .lo .o .obj -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/plugins/lipmi/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign src/plugins/lipmi/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): - -clean-noinstLTLIBRARIES: - -test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES) - @list='$(noinst_LTLIBRARIES)'; \ - locs=`for p in $$list; do echo $$p; done | \ - sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \ - sort -u`; \ - test -z "$$locs" || { \ - echo rm -f $${locs}; \ - rm -f $${locs}; \ - } - -libintf_lipmi.la: $(libintf_lipmi_la_OBJECTS) $(libintf_lipmi_la_DEPENDENCIES) $(EXTRA_libintf_lipmi_la_DEPENDENCIES) - $(AM_V_CCLD)$(LINK) $(libintf_lipmi_la_OBJECTS) $(libintf_lipmi_la_LIBADD) $(LIBS) - -mostlyclean-compile: - -rm -f *.$(OBJEXT) - -distclean-compile: - -rm -f *.tab.c - -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/lipmi.Plo@am__quote@ - -.c.o: -@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $< - -.c.obj: -@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'` - -.c.lo: -@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $< - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs - -ID: $(am__tagged_files) - $(am__define_uniq_tagged_files); mkid -fID $$unique -tags: tags-am -TAGS: tags - -tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) - set x; \ - here=`pwd`; \ - $(am__define_uniq_tagged_files); \ - shift; \ - if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - if test $$# -gt 0; then \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - "$$@" $$unique; \ - else \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$unique; \ - fi; \ - fi -ctags: ctags-am - -CTAGS: ctags -ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) - $(am__define_uniq_tagged_files); \ - test -z "$(CTAGS_ARGS)$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && $(am__cd) $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) "$$here" -cscopelist: cscopelist-am - -cscopelist-am: $(am__tagged_files) - list='$(am__tagged_files)'; \ - case "$(srcdir)" in \ - [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ - *) sdir=$(subdir)/$(srcdir) ;; \ - esac; \ - for i in $$list; do \ - if test -f "$$i"; then \ - echo "$(subdir)/$$i"; \ - else \ - echo "$$sdir/$$i"; \ - fi; \ - done >> $(top_builddir)/cscope.files - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-am -all-am: Makefile $(LTLIBRARIES) -installdirs: -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - if test -z '$(STRIP)'; then \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - install; \ - else \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ - fi -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." - -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) -clean: clean-am - -clean-am: clean-generic clean-libtool clean-noinstLTLIBRARIES \ - mostlyclean-am - -distclean: distclean-am - -rm -rf ./$(DEPDIR) - -rm -f Makefile -distclean-am: clean-am distclean-compile distclean-generic \ - distclean-tags - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -rf ./$(DEPDIR) - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-compile mostlyclean-generic \ - mostlyclean-libtool - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: - -.MAKE: install-am install-strip - -.PHONY: CTAGS GTAGS TAGS all all-am check check-am clean clean-generic \ - clean-libtool clean-noinstLTLIBRARIES cscopelist-am ctags \ - ctags-am distclean distclean-compile distclean-generic \ - distclean-libtool distclean-tags distdir dvi dvi-am html \ - html-am info info-am install install-am install-data \ - install-data-am install-dvi install-dvi-am install-exec \ - install-exec-am install-html install-html-am install-info \ - install-info-am install-man install-pdf install-pdf-am \ - install-ps install-ps-am install-strip installcheck \ - installcheck-am installdirs maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-compile \ - mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ - tags tags-am uninstall uninstall-am - - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/src/plugins/lipmi/lipmi.c b/src/plugins/lipmi/lipmi.c index fa7845d..f3db7ab 100644 --- a/src/plugins/lipmi/lipmi.c +++ b/src/plugins/lipmi/lipmi.c @@ -119,11 +119,11 @@ static struct ipmi_rs * ipmi_lipmi_send_cmd(struct ipmi_intf * intf, struct ipmi } struct ipmi_intf ipmi_lipmi_intf = { - name: "lipmi", - desc: "Solaris x86 LIPMI Interface", - open: ipmi_lipmi_open, - close: ipmi_lipmi_close, - sendrecv: ipmi_lipmi_send_cmd, - target_addr: IPMI_BMC_SLAVE_ADDR, + .name = "lipmi", + .desc = "Solaris x86 LIPMI Interface", + .open = ipmi_lipmi_open, + .close = ipmi_lipmi_close, + .sendrecv = ipmi_lipmi_send_cmd, + .target_addr = IPMI_BMC_SLAVE_ADDR, }; diff --git a/src/plugins/lipmi/lipmi.h b/src/plugins/lipmi/lipmi.h new file mode 100644 index 0000000..37a01fb --- /dev/null +++ b/src/plugins/lipmi/lipmi.h @@ -0,0 +1,43 @@ +/* + * Copyright (c) 2003 Sun Microsystems, Inc. All Rights Reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * Redistribution of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * + * Redistribution in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * Neither the name of Sun Microsystems, Inc. or the names of + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * This software is provided "AS IS," without a warranty of any kind. + * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, + * INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A + * PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY EXCLUDED. + * SUN MICROSYSTEMS, INC. ("SUN") AND ITS LICENSORS SHALL NOT BE LIABLE + * FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING + * OR DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES. IN NO EVENT WILL + * SUN OR ITS LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA, + * OR FOR DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR + * PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF + * LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE, + * EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. + */ + +#pragma once + +#include <ipmitool/ipmi.h> +#include <ipmitool/ipmi_intf.h> + +#define LIPMI_DEV "/dev/lipmi" + +struct ipmi_rs * ipmi_lipmi_send_cmd(struct ipmi_intf * intf, struct ipmi_rq * req); +int ipmi_lipmi_open(struct ipmi_intf * intf); +void ipmi_lipmi_close(struct ipmi_intf * intf); +int lipmi_intf_setup(struct ipmi_intf ** intf); diff --git a/src/plugins/open/Makefile.in b/src/plugins/open/Makefile.in deleted file mode 100644 index c4b7714..0000000 --- a/src/plugins/open/Makefile.in +++ /dev/null @@ -1,637 +0,0 @@ -# Makefile.in generated by automake 1.14.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994-2013 Free Software Foundation, Inc. - -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -# Copyright (c) 2003 Sun Microsystems, Inc. All Rights Reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# Redistribution of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# -# Redistribution in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in the -# documentation and/or other materials provided with the distribution. -# -# Neither the name of Sun Microsystems, Inc. or the names of -# contributors may be used to endorse or promote products derived -# from this software without specific prior written permission. -# -# This software is provided "AS IS," without a warranty of any kind. -# ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, -# INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A -# PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY EXCLUDED. -# SUN MICROSYSTEMS, INC. ("SUN") AND ITS LICENSORS SHALL NOT BE LIABLE -# FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING -# OR DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES. IN NO EVENT WILL -# SUN OR ITS LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA, -# OR FOR DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR -# PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF -# LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE, -# EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. - -VPATH = @srcdir@ -am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' -am__make_running_with_option = \ - case $${target_option-} in \ - ?) ;; \ - *) echo "am__make_running_with_option: internal error: invalid" \ - "target option '$${target_option-}' specified" >&2; \ - exit 1;; \ - esac; \ - has_opt=no; \ - sane_makeflags=$$MAKEFLAGS; \ - if $(am__is_gnu_make); then \ - sane_makeflags=$$MFLAGS; \ - else \ - case $$MAKEFLAGS in \ - *\\[\ \ ]*) \ - bs=\\; \ - sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ - | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ - esac; \ - fi; \ - skip_next=no; \ - strip_trailopt () \ - { \ - flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ - }; \ - for flg in $$sane_makeflags; do \ - test $$skip_next = yes && { skip_next=no; continue; }; \ - case $$flg in \ - *=*|--*) continue;; \ - -*I) strip_trailopt 'I'; skip_next=yes;; \ - -*I?*) strip_trailopt 'I';; \ - -*O) strip_trailopt 'O'; skip_next=yes;; \ - -*O?*) strip_trailopt 'O';; \ - -*l) strip_trailopt 'l'; skip_next=yes;; \ - -*l?*) strip_trailopt 'l';; \ - -[dEDm]) skip_next=yes;; \ - -[JT]) skip_next=yes;; \ - esac; \ - case $$flg in \ - *$$target_option*) has_opt=yes; break;; \ - esac; \ - done; \ - test $$has_opt = yes -am__make_dryrun = (target_option=n; $(am__make_running_with_option)) -am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -target_triplet = @target@ -subdir = src/plugins/open -DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ - $(top_srcdir)/depcomp -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(install_sh) -d -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -LTLIBRARIES = $(noinst_LTLIBRARIES) -libintf_open_la_DEPENDENCIES = $(top_builddir)/lib/libipmitool.la -am_libintf_open_la_OBJECTS = open.lo -libintf_open_la_OBJECTS = $(am_libintf_open_la_OBJECTS) -AM_V_lt = $(am__v_lt_@AM_V@) -am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@) -am__v_lt_0 = --silent -am__v_lt_1 = -AM_V_P = $(am__v_P_@AM_V@) -am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) -am__v_P_0 = false -am__v_P_1 = : -AM_V_GEN = $(am__v_GEN_@AM_V@) -am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) -am__v_GEN_0 = @echo " GEN " $@; -am__v_GEN_1 = -AM_V_at = $(am__v_at_@AM_V@) -am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) -am__v_at_0 = @ -am__v_at_1 = -DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) -depcomp = $(SHELL) $(top_srcdir)/depcomp -am__depfiles_maybe = depfiles -am__mv = mv -f -COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ - $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ - $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \ - $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ - $(AM_CFLAGS) $(CFLAGS) -AM_V_CC = $(am__v_CC_@AM_V@) -am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@) -am__v_CC_0 = @echo " CC " $@; -am__v_CC_1 = -CCLD = $(CC) -LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ - $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ - $(AM_LDFLAGS) $(LDFLAGS) -o $@ -AM_V_CCLD = $(am__v_CCLD_@AM_V@) -am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@) -am__v_CCLD_0 = @echo " CCLD " $@; -am__v_CCLD_1 = -SOURCES = $(libintf_open_la_SOURCES) -DIST_SOURCES = $(libintf_open_la_SOURCES) -am__can_run_installinfo = \ - case $$AM_UPDATE_INFO_DIR in \ - n|no|NO) false;; \ - *) (install-info --version) >/dev/null 2>&1;; \ - esac -am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) -# Read a list of newline-separated strings from the standard input, -# and print each of them once, without duplicates. Input order is -# *not* preserved. -am__uniquify_input = $(AWK) '\ - BEGIN { nonempty = 0; } \ - { items[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in items) print i; }; } \ -' -# Make sure the list of sources is unique. This is necessary because, -# e.g., the same source file might be shared among _SOURCES variables -# for different programs/libraries. -am__define_uniq_tagged_files = \ - list='$(am__tagged_files)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | $(am__uniquify_input)` -ETAGS = etags -CTAGS = ctags -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -ARCH = @ARCH@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BASEDIR = @BASEDIR@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DISTRO = @DISTRO@ -DLLTOOL = @DLLTOOL@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FGREP = @FGREP@ -GREP = @GREP@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INTF_BMC = @INTF_BMC@ -INTF_BMC_LIB = @INTF_BMC_LIB@ -INTF_DUMMY = @INTF_DUMMY@ -INTF_DUMMY_LIB = @INTF_DUMMY_LIB@ -INTF_FREE = @INTF_FREE@ -INTF_FREE_LIB = @INTF_FREE_LIB@ -INTF_IMB = @INTF_IMB@ -INTF_IMB_LIB = @INTF_IMB_LIB@ -INTF_LAN = @INTF_LAN@ -INTF_LANPLUS = @INTF_LANPLUS@ -INTF_LANPLUS_LIB = @INTF_LANPLUS_LIB@ -INTF_LAN_LIB = @INTF_LAN_LIB@ -INTF_LIPMI = @INTF_LIPMI@ -INTF_LIPMI_LIB = @INTF_LIPMI_LIB@ -INTF_OPEN = @INTF_OPEN@ -INTF_OPEN_LIB = @INTF_OPEN_LIB@ -INTF_SERIAL = @INTF_SERIAL@ -INTF_SERIAL_LIB = @INTF_SERIAL_LIB@ -INTF_USB = @INTF_USB@ -INTF_USB_LIB = @INTF_USB_LIB@ -IPMITOOL_INTF_LIB = @IPMITOOL_INTF_LIB@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ -MKDIR_P = @MKDIR_P@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OS = @OS@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -POW_LIB = @POW_LIB@ -PSTAMP = @PSTAMP@ -RANLIB = @RANLIB@ -RPMBUILD = @RPMBUILD@ -RPM_RELEASE = @RPM_RELEASE@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -VERSION = @VERSION@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_configure_args = @ac_configure_args@ -ac_ct_AR = @ac_ct_AR@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target = @target@ -target_alias = @target_alias@ -target_cpu = @target_cpu@ -target_os = @target_os@ -target_vendor = @target_vendor@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -MAINTAINERCLEANFILES = Makefile.in -AM_CPPFLAGS = -I$(top_srcdir)/include -EXTRA_LTLIBRARIES = libintf_open.la -noinst_LTLIBRARIES = @INTF_OPEN_LIB@ -libintf_open_la_LIBADD = $(top_builddir)/lib/libipmitool.la -libintf_open_la_SOURCES = open.c open.h -all: all-am - -.SUFFIXES: -.SUFFIXES: .c .lo .o .obj -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/plugins/open/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign src/plugins/open/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): - -clean-noinstLTLIBRARIES: - -test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES) - @list='$(noinst_LTLIBRARIES)'; \ - locs=`for p in $$list; do echo $$p; done | \ - sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \ - sort -u`; \ - test -z "$$locs" || { \ - echo rm -f $${locs}; \ - rm -f $${locs}; \ - } - -libintf_open.la: $(libintf_open_la_OBJECTS) $(libintf_open_la_DEPENDENCIES) $(EXTRA_libintf_open_la_DEPENDENCIES) - $(AM_V_CCLD)$(LINK) $(libintf_open_la_OBJECTS) $(libintf_open_la_LIBADD) $(LIBS) - -mostlyclean-compile: - -rm -f *.$(OBJEXT) - -distclean-compile: - -rm -f *.tab.c - -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/open.Plo@am__quote@ - -.c.o: -@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $< - -.c.obj: -@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'` - -.c.lo: -@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $< - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs - -ID: $(am__tagged_files) - $(am__define_uniq_tagged_files); mkid -fID $$unique -tags: tags-am -TAGS: tags - -tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) - set x; \ - here=`pwd`; \ - $(am__define_uniq_tagged_files); \ - shift; \ - if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - if test $$# -gt 0; then \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - "$$@" $$unique; \ - else \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$unique; \ - fi; \ - fi -ctags: ctags-am - -CTAGS: ctags -ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) - $(am__define_uniq_tagged_files); \ - test -z "$(CTAGS_ARGS)$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && $(am__cd) $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) "$$here" -cscopelist: cscopelist-am - -cscopelist-am: $(am__tagged_files) - list='$(am__tagged_files)'; \ - case "$(srcdir)" in \ - [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ - *) sdir=$(subdir)/$(srcdir) ;; \ - esac; \ - for i in $$list; do \ - if test -f "$$i"; then \ - echo "$(subdir)/$$i"; \ - else \ - echo "$$sdir/$$i"; \ - fi; \ - done >> $(top_builddir)/cscope.files - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-am -all-am: Makefile $(LTLIBRARIES) -installdirs: -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - if test -z '$(STRIP)'; then \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - install; \ - else \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ - fi -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." - -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) -clean: clean-am - -clean-am: clean-generic clean-libtool clean-noinstLTLIBRARIES \ - mostlyclean-am - -distclean: distclean-am - -rm -rf ./$(DEPDIR) - -rm -f Makefile -distclean-am: clean-am distclean-compile distclean-generic \ - distclean-tags - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -rf ./$(DEPDIR) - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-compile mostlyclean-generic \ - mostlyclean-libtool - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: - -.MAKE: install-am install-strip - -.PHONY: CTAGS GTAGS TAGS all all-am check check-am clean clean-generic \ - clean-libtool clean-noinstLTLIBRARIES cscopelist-am ctags \ - ctags-am distclean distclean-compile distclean-generic \ - distclean-libtool distclean-tags distdir dvi dvi-am html \ - html-am info info-am install install-am install-data \ - install-data-am install-dvi install-dvi-am install-exec \ - install-exec-am install-html install-html-am install-info \ - install-info-am install-man install-pdf install-pdf-am \ - install-ps install-ps-am install-strip installcheck \ - installcheck-am installdirs maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-compile \ - mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ - tags tags-am uninstall uninstall-am - - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/src/plugins/open/open.c b/src/plugins/open/open.c index 5beeac7..39c8ea2 100644 --- a/src/plugins/open/open.c +++ b/src/plugins/open/open.c @@ -1,21 +1,21 @@ /* * Copyright (c) 2003 Sun Microsystems, Inc. All Rights Reserved. - * + * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: - * + * * Redistribution of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. - * + * * Redistribution in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. - * + * * Neither the name of Sun Microsystems, Inc. or the names of * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. - * + * * This software is provided "AS IS," without a warranty of any kind. * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, * INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A @@ -29,7 +29,6 @@ * LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE, * EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. */ -#define _POSIX_C_SOURCE 1 #include <stdio.h> #include <fcntl.h> @@ -89,11 +88,10 @@ extern int verbose; -static int -ipmi_openipmi_open(struct ipmi_intf * intf) +static +int +ipmi_openipmi_open(struct ipmi_intf *intf) { - int i = 0; - char ipmi_dev[16]; char ipmi_devfs[16]; char ipmi_devfs2[16]; @@ -115,32 +113,35 @@ ipmi_openipmi_open(struct ipmi_intf * intf) } if (intf->fd < 0) { lperror(LOG_ERR, "Could not open device at %s or %s or %s", - ipmi_dev, ipmi_devfs , ipmi_devfs2); + ipmi_dev, ipmi_devfs, ipmi_devfs2); return -1; } } - if (ioctl(intf->fd, IPMICTL_SET_GETS_EVENTS_CMD, &i) < 0) { + int receive_events = TRUE; + + if (ioctl(intf->fd, IPMICTL_SET_GETS_EVENTS_CMD, &receive_events) < 0) { lperror(LOG_ERR, "Could not enable event receiver"); return -1; } - + intf->opened = 1; - /* This is never set to 0, the default is IPMI_BMC_SLAVE_ADDR */ + /* This is never set to 0, the default is IPMI_BMC_SLAVE_ADDR */ if (intf->my_addr != 0) { if (intf->set_my_addr(intf, intf->my_addr) < 0) { lperror(LOG_ERR, "Could not set IPMB address"); return -1; } - lprintf(LOG_DEBUG, "Set IPMB address to 0x%x", - intf->my_addr ); + lprintf(LOG_DEBUG, "Set IPMB address to 0x%x", intf->my_addr); } intf->manufacturer_id = ipmi_get_oem(intf); return intf->fd; } -static int + +static +int ipmi_openipmi_set_my_addr(struct ipmi_intf *intf, uint8_t addr) { unsigned int a = addr; @@ -152,8 +153,9 @@ ipmi_openipmi_set_my_addr(struct ipmi_intf *intf, uint8_t addr) return 0; } -static void -ipmi_openipmi_close(struct ipmi_intf * intf) +static +void +ipmi_openipmi_close(struct ipmi_intf *intf) { if (intf->fd >= 0) { close(intf->fd); @@ -164,10 +166,11 @@ ipmi_openipmi_close(struct ipmi_intf * intf) intf->manufacturer_id = IPMI_OEM_UNKNOWN; } -static struct ipmi_rs * -ipmi_openipmi_send_cmd(struct ipmi_intf * intf, struct ipmi_rq * req) +static +struct ipmi_rs * +ipmi_openipmi_send_cmd(struct ipmi_intf *intf, struct ipmi_rq *req) { - struct ipmi_recv recv; + struct ipmi_recv recv = {}; struct ipmi_addr addr; struct ipmi_system_interface_addr bmc_addr = { .addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE, @@ -182,28 +185,26 @@ ipmi_openipmi_send_cmd(struct ipmi_intf * intf, struct ipmi_rq * req) static int curr_seq = 0; fd_set rset; - uint8_t * data = NULL; + uint8_t *data = NULL; int data_len = 0; int retval = 0; - - if (intf == NULL || req == NULL) + if (!intf || !req) return NULL; ipmb_addr.channel = intf->target_channel & 0x0f; - if (intf->opened == 0 && intf->open != NULL) + if (!intf->opened && intf->open) if (intf->open(intf) < 0) return NULL; if (verbose > 2) { fprintf(stderr, "OpenIPMI Request Message Header:\n"); - fprintf(stderr, " netfn = 0x%x\n", req->msg.netfn ); + fprintf(stderr, " netfn = 0x%x\n", req->msg.netfn); fprintf(stderr, " cmd = 0x%x\n", req->msg.cmd); - printbuf(req->msg.data, req->msg.data_len, "OpenIPMI Request Message Data"); + printbuf(req->msg.data, req->msg.data_len, + "OpenIPMI Request Message Data"); } - - /* * setup and send message @@ -212,111 +213,113 @@ ipmi_openipmi_send_cmd(struct ipmi_intf * intf, struct ipmi_rq * req) memset(&_req, 0, sizeof(struct ipmi_req)); if (intf->target_addr != 0 && - intf->target_addr != intf->my_addr) { + intf->target_addr != intf->my_addr) + { /* use IPMB address if needed */ ipmb_addr.slave_addr = intf->target_addr; ipmb_addr.lun = req->msg.lun; - lprintf(LOG_DEBUG, "Sending request 0x%x to " - "IPMB target @ 0x%x:0x%x (from 0x%x)", - req->msg.cmd, - intf->target_addr,intf->target_channel, intf->my_addr); - - if(intf->transit_addr != 0 && intf->transit_addr != intf->my_addr) { - uint8_t index = 0; - - lprintf(LOG_DEBUG, "Encapsulating data sent to " - "end target [0x%02x,0x%02x] using transit [0x%02x,0x%02x] from 0x%x ", - (0x40 | intf->target_channel), - intf->target_addr, - intf->transit_channel, - intf->transit_addr, - intf->my_addr - ); - - /* Convert Message to 'Send Message' */ - /* Supplied req : req , internal req : _req */ - - if (verbose > 4) { - fprintf(stderr, "Converting message:\n"); - fprintf(stderr, " netfn = 0x%x\n", req->msg.netfn ); - fprintf(stderr, " cmd = 0x%x\n", req->msg.cmd); - if (req->msg.data && req->msg.data_len) { - fprintf(stderr, " data_len = %d\n", req->msg.data_len); - fprintf(stderr, " data = %s\n", - buf2str(req->msg.data,req->msg.data_len)); - } - } - - /* Modify target address to use 'transit' instead */ - ipmb_addr.slave_addr = intf->transit_addr; - ipmb_addr.channel = intf->transit_channel; - - /* FIXME backup "My address" */ - data_len = req->msg.data_len + 8; - data = malloc(data_len); - if (data == NULL) { - lprintf(LOG_ERR, "ipmitool: malloc failure"); - return NULL; - } - - memset(data, 0, data_len); - - data[index++] = (0x40|intf->target_channel); - data[index++] = intf->target_addr; - data[index++] = ( req->msg.netfn << 2 ) | req->msg.lun ; - data[index++] = ipmi_csum(data+1, 2); - data[index++] = 0xFF; /* normally 0x20 , overwritten by IPMC */ - data[index++] = ( (0) << 2) | 0 ; /* FIXME */ - data[index++] = req->msg.cmd; - memcpy( (data+index) , req->msg.data, req->msg.data_len); - index += req->msg.data_len; - data[index++] = ipmi_csum( (data+4),(req->msg.data_len + 3) ); - - if (verbose > 4) { - fprintf(stderr, "Encapsulated message:\n"); - fprintf(stderr, " netfn = 0x%x\n", IPMI_NETFN_APP ); - fprintf(stderr, " cmd = 0x%x\n", 0x34 ); - if (data && data_len) { - fprintf(stderr, " data_len = %d\n", data_len); - fprintf(stderr, " data = %s\n", - buf2str(data,data_len)); - } - } + lprintf(LOG_DEBUG, + "Sending request 0x%x to " + "IPMB target @ 0x%x:0x%x (from 0x%x)", + req->msg.cmd, intf->target_addr, intf->target_channel, + intf->my_addr); + + if (intf->transit_addr != 0 && + intf->transit_addr != intf->my_addr) + { + uint8_t index = 0; + + lprintf(LOG_DEBUG, + "Encapsulating data sent to " + "end target [0x%02x,0x%02x] using " + "transit [0x%02x,0x%02x] from 0x%x ", + (0x40 | intf->target_channel), + intf->target_addr, + intf->transit_channel, + intf->transit_addr, + intf->my_addr); + + /* Convert Message to 'Send Message' */ + /* Supplied req : req , internal req : _req */ + + if (verbose > 4) { + fprintf(stderr, "Converting message:\n"); + fprintf(stderr, " netfn = 0x%x\n", req->msg.netfn); + fprintf(stderr, " cmd = 0x%x\n", req->msg.cmd); + if (req->msg.data && req->msg.data_len) { + fprintf(stderr, " data_len = %d\n", req->msg.data_len); + fprintf(stderr, " data = %s\n", + buf2str(req->msg.data, req->msg.data_len)); + } + } + + /* Modify target address to use 'transit' instead */ + ipmb_addr.slave_addr = intf->transit_addr; + ipmb_addr.channel = intf->transit_channel; + + /* FIXME backup "My address" */ + data_len = req->msg.data_len + 8; + data = malloc(data_len); + if (!data) { + lprintf(LOG_ERR, "ipmitool: malloc failure"); + return NULL; + } + + memset(data, 0, data_len); + + data[index++] = (0x40 | intf->target_channel); + data[index++] = intf->target_addr; + data[index++] = (req->msg.netfn << 2) | req->msg.lun; + data[index++] = ipmi_csum(data + 1, 2); + data[index++] = 0xFF; /* normally 0x20 , overwritten by IPMC */ + data[index++] = ((0) << 2) | 0; /* FIXME */ + data[index++] = req->msg.cmd; + memcpy((data + index), req->msg.data, req->msg.data_len); + index += req->msg.data_len; + data[index++] = ipmi_csum((data + 4), (req->msg.data_len + 3)); + + if (verbose > 4) { + fprintf(stderr, "Encapsulated message:\n"); + fprintf(stderr, " netfn = 0x%x\n", IPMI_NETFN_APP); + fprintf(stderr, " cmd = 0x%x\n", 0x34); + if (data && data_len) { + fprintf(stderr, " data_len = %d\n", data_len); + fprintf(stderr, " data = %s\n", + buf2str(data, data_len)); + } + } } - _req.addr = (unsigned char *) &ipmb_addr; + _req.addr = (unsigned char *)&ipmb_addr; _req.addr_len = sizeof(ipmb_addr); } else { - /* otherwise use system interface */ - lprintf(LOG_DEBUG+2, "Sending request 0x%x to " - "System Interface", req->msg.cmd); - bmc_addr.lun = req->msg.lun; - _req.addr = (unsigned char *) &bmc_addr; - _req.addr_len = sizeof(bmc_addr); + /* otherwise use system interface */ + lprintf(LOG_DEBUG + 2, "Sending request 0x%x to System Interface", + req->msg.cmd); + bmc_addr.lun = req->msg.lun; + _req.addr = (unsigned char *)&bmc_addr; + _req.addr_len = sizeof(bmc_addr); } _req.msgid = curr_seq++; /* In case of a bridge request */ - if( data != NULL && data_len != 0 ) { - _req.msg.data = data; - _req.msg.data_len = data_len; - _req.msg.netfn = IPMI_NETFN_APP; - _req.msg.cmd = 0x34; + if (data && data_len != 0) { + _req.msg.data = data; + _req.msg.data_len = data_len; + _req.msg.netfn = IPMI_NETFN_APP; + _req.msg.cmd = 0x34; } else { - _req.msg.data = req->msg.data; - _req.msg.data_len = req->msg.data_len; - _req.msg.netfn = req->msg.netfn; - _req.msg.cmd = req->msg.cmd; + _req.msg.data = req->msg.data; + _req.msg.data_len = req->msg.data_len; + _req.msg.netfn = req->msg.netfn; + _req.msg.cmd = req->msg.cmd; } - + if (ioctl(intf->fd, IPMICTL_SEND_COMMAND, &_req) < 0) { - lperror(LOG_ERR, "Unable to send command"); - if (data != NULL) { - free(data); - data = NULL; - } - return NULL; + lperror(LOG_ERR, "Unable to send command"); + free_n(&data); + return NULL; } /* @@ -324,99 +327,102 @@ ipmi_openipmi_send_cmd(struct ipmi_intf * intf, struct ipmi_rq * req) */ if (intf->noanswer) { - if (data != NULL) { - free(data); - data = NULL; - } - return NULL; + free_n(&data); + return NULL; } FD_ZERO(&rset); FD_SET(intf->fd, &rset); read_timeout.tv_sec = IPMI_OPENIPMI_READ_TIMEOUT; read_timeout.tv_usec = 0; - retval = select(intf->fd+1, &rset, NULL, NULL, &read_timeout); - if (retval < 0) { - lperror(LOG_ERR, "I/O Error"); - if (data != NULL) { - free(data); - data = NULL; - } - return NULL; - } else if (retval == 0) { - lprintf(LOG_ERR, "No data available"); - if (data != NULL) { - free(data); - data = NULL; + do { + do { + retval = select(intf->fd + 1, &rset, NULL, NULL, &read_timeout); + } while (retval < 0 && errno == EINTR); + if (retval < 0) { + lperror(LOG_ERR, "I/O Error"); + free_n(&data); + return NULL; + } else if (retval == 0) { + lprintf(LOG_ERR, "No data available"); + free_n(&data); + return NULL; + } + if (FD_ISSET(intf->fd, &rset) == 0) { + lprintf(LOG_ERR, "No data available"); + free_n(&data); + return NULL; } - return NULL; - } - if (FD_ISSET(intf->fd, &rset) == 0) { - lprintf(LOG_ERR, "No data available"); - if (data != NULL) { - free(data); - data = NULL; - } - return NULL; - } - recv.addr = (unsigned char *) &addr; - recv.addr_len = sizeof(addr); - recv.msg.data = rsp.data; - recv.msg.data_len = sizeof(rsp.data); - - /* get data */ - if (ioctl(intf->fd, IPMICTL_RECEIVE_MSG_TRUNC, &recv) < 0) { - lperror(LOG_ERR, "Error receiving message"); - if (errno != EMSGSIZE) { - if (data != NULL) { - free(data); - data = NULL; - } - return NULL; - } - } + recv.addr = (unsigned char *)&addr; + recv.addr_len = sizeof(addr); + recv.msg.data = rsp.data; + recv.msg.data_len = sizeof(rsp.data); + + /* get data */ + if (ioctl(intf->fd, IPMICTL_RECEIVE_MSG_TRUNC, &recv) < 0) { + lperror(LOG_ERR, "Error receiving message"); + if (errno != EMSGSIZE) { + free_n(&data); + return NULL; + } + } + + /* If the message received wasn't expected, try to grab the + * next message until it's out of messages. -EAGAIN is + * returned if the list empty, but basically if it returns a + * message, check if it's alright. + */ + if (_req.msgid != recv.msgid) { + lprintf(LOG_NOTICE, + "Received a response with unexpected ID %ld vs. %ld", + recv.msgid, _req.msgid); + } + } while (_req.msgid != recv.msgid); if (verbose > 4) { - fprintf(stderr, "Got message:"); - fprintf(stderr, " type = %d\n", recv.recv_type); - fprintf(stderr, " channel = 0x%x\n", addr.channel); - fprintf(stderr, " msgid = %ld\n", recv.msgid); - fprintf(stderr, " netfn = 0x%x\n", recv.msg.netfn); - fprintf(stderr, " cmd = 0x%x\n", recv.msg.cmd); - if (recv.msg.data && recv.msg.data_len) { - fprintf(stderr, " data_len = %d\n", recv.msg.data_len); - fprintf(stderr, " data = %s\n", - buf2str(recv.msg.data, recv.msg.data_len)); - } + fprintf(stderr, "Got message:"); + fprintf(stderr, " type = %d\n", recv.recv_type); + fprintf(stderr, " channel = 0x%x\n", addr.channel); + fprintf(stderr, " msgid = %ld\n", recv.msgid); + fprintf(stderr, " netfn = 0x%x\n", recv.msg.netfn); + fprintf(stderr, " cmd = 0x%x\n", recv.msg.cmd); + if (recv.msg.data && recv.msg.data_len) { + fprintf(stderr, " data_len = %d\n", recv.msg.data_len); + fprintf(stderr, " data = %s\n", + buf2str(recv.msg.data, recv.msg.data_len)); + } } - if(intf->transit_addr != 0 && intf->transit_addr != intf->my_addr) { - /* ipmb_addr.transit_slave_addr = intf->transit_addr; */ - lprintf(LOG_DEBUG, "Decapsulating data received from transit " - "IPMB target @ 0x%x", intf->transit_addr); - - /* comp code */ - /* Check data */ - - if( recv.msg.data[0] == 0 ) { - recv.msg.netfn = recv.msg.data[2] >> 2; - recv.msg.cmd = recv.msg.data[6]; - - recv.msg.data = memmove(recv.msg.data ,recv.msg.data+7 , recv.msg.data_len - 7); - recv.msg.data_len -=8; - - if (verbose > 4) { - fprintf(stderr, "Decapsulated message:\n"); - fprintf(stderr, " netfn = 0x%x\n", recv.msg.netfn ); - fprintf(stderr, " cmd = 0x%x\n", recv.msg.cmd); - if (recv.msg.data && recv.msg.data_len) { - fprintf(stderr, " data_len = %d\n", recv.msg.data_len); - fprintf(stderr, " data = %s\n", - buf2str(recv.msg.data,recv.msg.data_len)); - } - } - } + if (intf->transit_addr != 0 && intf->transit_addr != intf->my_addr) { + /* ipmb_addr.transit_slave_addr = intf->transit_addr; */ + lprintf(LOG_DEBUG, + "Decapsulating data received from transit " + "IPMB target @ 0x%x", + intf->transit_addr); + + /* comp code */ + /* Check data */ + + if (recv.msg.data[0] == 0) { + recv.msg.netfn = recv.msg.data[2] >> 2; + recv.msg.cmd = recv.msg.data[6]; + + recv.msg.data = memmove(recv.msg.data, recv.msg.data + 7, + recv.msg.data_len - 7); + recv.msg.data_len -= 8; + + if (verbose > 4) { + fprintf(stderr, "Decapsulated message:\n"); + fprintf(stderr, " netfn = 0x%x\n", recv.msg.netfn); + fprintf(stderr, " cmd = 0x%x\n", recv.msg.cmd); + if (recv.msg.data && recv.msg.data_len) { + fprintf(stderr, " data_len = %d\n", recv.msg.data_len); + fprintf(stderr, " data = %s\n", + buf2str(recv.msg.data, recv.msg.data_len)); + } + } + } } /* save completion code */ @@ -424,20 +430,18 @@ ipmi_openipmi_send_cmd(struct ipmi_intf * intf, struct ipmi_rq * req) rsp.data_len = recv.msg.data_len - 1; /* save response data for caller */ - if (rsp.ccode == 0 && rsp.data_len > 0) { - memmove(rsp.data, rsp.data + 1, rsp.data_len); - rsp.data[rsp.data_len] = 0; + if (!rsp.ccode && rsp.data_len > 0) { + memmove(rsp.data, rsp.data + 1, rsp.data_len); + rsp.data[rsp.data_len] = 0; } - if (data != NULL) { - free(data); - data = NULL; - } + free_n(&data); return &rsp; } -int ipmi_openipmi_setup(struct ipmi_intf * intf) +int +ipmi_openipmi_setup(struct ipmi_intf *intf) { /* set default payload size */ intf->max_request_data_size = IPMI_OPENIPMI_MAX_RQ_DATA_SIZE; diff --git a/src/plugins/open/open.h b/src/plugins/open/open.h index 5d7aa5b..aab3085 100644 --- a/src/plugins/open/open.h +++ b/src/plugins/open/open.h @@ -30,8 +30,7 @@ * EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. */ -#ifndef IPMI_OPENIPMI_H -#define IPMI_OPENIPMI_H +#pragma once #define IPMI_MAX_ADDR_SIZE 0x20 #define IPMI_BMC_CHANNEL 0xf @@ -102,5 +101,3 @@ struct ipmi_ipmb_addr { #define IPMICTL_GET_MY_ADDRESS_CMD _IOR(IPMI_IOC_MAGIC, 18, unsigned int) #define IPMICTL_SET_MY_LUN_CMD _IOR(IPMI_IOC_MAGIC, 19, unsigned int) #define IPMICTL_GET_MY_LUN_CMD _IOR(IPMI_IOC_MAGIC, 20, unsigned int) - -#endif /*IPMI_OPENIPMI_H*/ diff --git a/src/plugins/serial/Makefile.in b/src/plugins/serial/Makefile.in deleted file mode 100644 index aa03dd8..0000000 --- a/src/plugins/serial/Makefile.in +++ /dev/null @@ -1,638 +0,0 @@ -# Makefile.in generated by automake 1.14.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994-2013 Free Software Foundation, Inc. - -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -# * Copyright (c) 2012 Pigeon Point Systems. All Rights Reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# Redistribution of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# -# Redistribution in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in the -# documentation and/or other materials provided with the distribution. -# -# Neither the name of Pigeon Point Systems, Inc. or the names of -# contributors may be used to endorse or promote products derived -# from this software without specific prior written permission. -# -# This software is provided "AS IS," without a warranty of any kind. -# ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, -# INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A -# PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY EXCLUDED. -# PIGEON POINT SYSTEMS ("PPS") AND ITS LICENSORS SHALL NOT BE LIABLE -# FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING -# OR DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES. IN NO EVENT WILL -# PPS OR ITS LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA, -# OR FOR DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR -# PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF -# LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE, -# EVEN IF PPS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. - -VPATH = @srcdir@ -am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' -am__make_running_with_option = \ - case $${target_option-} in \ - ?) ;; \ - *) echo "am__make_running_with_option: internal error: invalid" \ - "target option '$${target_option-}' specified" >&2; \ - exit 1;; \ - esac; \ - has_opt=no; \ - sane_makeflags=$$MAKEFLAGS; \ - if $(am__is_gnu_make); then \ - sane_makeflags=$$MFLAGS; \ - else \ - case $$MAKEFLAGS in \ - *\\[\ \ ]*) \ - bs=\\; \ - sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ - | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ - esac; \ - fi; \ - skip_next=no; \ - strip_trailopt () \ - { \ - flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ - }; \ - for flg in $$sane_makeflags; do \ - test $$skip_next = yes && { skip_next=no; continue; }; \ - case $$flg in \ - *=*|--*) continue;; \ - -*I) strip_trailopt 'I'; skip_next=yes;; \ - -*I?*) strip_trailopt 'I';; \ - -*O) strip_trailopt 'O'; skip_next=yes;; \ - -*O?*) strip_trailopt 'O';; \ - -*l) strip_trailopt 'l'; skip_next=yes;; \ - -*l?*) strip_trailopt 'l';; \ - -[dEDm]) skip_next=yes;; \ - -[JT]) skip_next=yes;; \ - esac; \ - case $$flg in \ - *$$target_option*) has_opt=yes; break;; \ - esac; \ - done; \ - test $$has_opt = yes -am__make_dryrun = (target_option=n; $(am__make_running_with_option)) -am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -target_triplet = @target@ -subdir = src/plugins/serial -DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ - $(top_srcdir)/depcomp -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(install_sh) -d -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -LTLIBRARIES = $(noinst_LTLIBRARIES) -libintf_serial_la_DEPENDENCIES = $(top_builddir)/lib/libipmitool.la -am_libintf_serial_la_OBJECTS = serial_terminal.lo serial_basic.lo -libintf_serial_la_OBJECTS = $(am_libintf_serial_la_OBJECTS) -AM_V_lt = $(am__v_lt_@AM_V@) -am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@) -am__v_lt_0 = --silent -am__v_lt_1 = -AM_V_P = $(am__v_P_@AM_V@) -am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) -am__v_P_0 = false -am__v_P_1 = : -AM_V_GEN = $(am__v_GEN_@AM_V@) -am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) -am__v_GEN_0 = @echo " GEN " $@; -am__v_GEN_1 = -AM_V_at = $(am__v_at_@AM_V@) -am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) -am__v_at_0 = @ -am__v_at_1 = -DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) -depcomp = $(SHELL) $(top_srcdir)/depcomp -am__depfiles_maybe = depfiles -am__mv = mv -f -COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ - $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ - $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \ - $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ - $(AM_CFLAGS) $(CFLAGS) -AM_V_CC = $(am__v_CC_@AM_V@) -am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@) -am__v_CC_0 = @echo " CC " $@; -am__v_CC_1 = -CCLD = $(CC) -LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ - $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ - $(AM_LDFLAGS) $(LDFLAGS) -o $@ -AM_V_CCLD = $(am__v_CCLD_@AM_V@) -am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@) -am__v_CCLD_0 = @echo " CCLD " $@; -am__v_CCLD_1 = -SOURCES = $(libintf_serial_la_SOURCES) -DIST_SOURCES = $(libintf_serial_la_SOURCES) -am__can_run_installinfo = \ - case $$AM_UPDATE_INFO_DIR in \ - n|no|NO) false;; \ - *) (install-info --version) >/dev/null 2>&1;; \ - esac -am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) -# Read a list of newline-separated strings from the standard input, -# and print each of them once, without duplicates. Input order is -# *not* preserved. -am__uniquify_input = $(AWK) '\ - BEGIN { nonempty = 0; } \ - { items[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in items) print i; }; } \ -' -# Make sure the list of sources is unique. This is necessary because, -# e.g., the same source file might be shared among _SOURCES variables -# for different programs/libraries. -am__define_uniq_tagged_files = \ - list='$(am__tagged_files)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | $(am__uniquify_input)` -ETAGS = etags -CTAGS = ctags -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -ARCH = @ARCH@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BASEDIR = @BASEDIR@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DISTRO = @DISTRO@ -DLLTOOL = @DLLTOOL@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FGREP = @FGREP@ -GREP = @GREP@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INTF_BMC = @INTF_BMC@ -INTF_BMC_LIB = @INTF_BMC_LIB@ -INTF_DUMMY = @INTF_DUMMY@ -INTF_DUMMY_LIB = @INTF_DUMMY_LIB@ -INTF_FREE = @INTF_FREE@ -INTF_FREE_LIB = @INTF_FREE_LIB@ -INTF_IMB = @INTF_IMB@ -INTF_IMB_LIB = @INTF_IMB_LIB@ -INTF_LAN = @INTF_LAN@ -INTF_LANPLUS = @INTF_LANPLUS@ -INTF_LANPLUS_LIB = @INTF_LANPLUS_LIB@ -INTF_LAN_LIB = @INTF_LAN_LIB@ -INTF_LIPMI = @INTF_LIPMI@ -INTF_LIPMI_LIB = @INTF_LIPMI_LIB@ -INTF_OPEN = @INTF_OPEN@ -INTF_OPEN_LIB = @INTF_OPEN_LIB@ -INTF_SERIAL = @INTF_SERIAL@ -INTF_SERIAL_LIB = @INTF_SERIAL_LIB@ -INTF_USB = @INTF_USB@ -INTF_USB_LIB = @INTF_USB_LIB@ -IPMITOOL_INTF_LIB = @IPMITOOL_INTF_LIB@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ -MKDIR_P = @MKDIR_P@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OS = @OS@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -POW_LIB = @POW_LIB@ -PSTAMP = @PSTAMP@ -RANLIB = @RANLIB@ -RPMBUILD = @RPMBUILD@ -RPM_RELEASE = @RPM_RELEASE@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -VERSION = @VERSION@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_configure_args = @ac_configure_args@ -ac_ct_AR = @ac_ct_AR@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target = @target@ -target_alias = @target_alias@ -target_cpu = @target_cpu@ -target_os = @target_os@ -target_vendor = @target_vendor@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -MAINTAINERCLEANFILES = Makefile.in -AM_CPPFLAGS = -I$(top_srcdir)/include -EXTRA_LTLIBRARIES = libintf_serial.la -noinst_LTLIBRARIES = @INTF_SERIAL_LIB@ -libintf_serial_la_LIBADD = $(top_builddir)/lib/libipmitool.la -libintf_serial_la_SOURCES = serial_terminal.c serial_basic.c -all: all-am - -.SUFFIXES: -.SUFFIXES: .c .lo .o .obj -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/plugins/serial/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign src/plugins/serial/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): - -clean-noinstLTLIBRARIES: - -test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES) - @list='$(noinst_LTLIBRARIES)'; \ - locs=`for p in $$list; do echo $$p; done | \ - sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \ - sort -u`; \ - test -z "$$locs" || { \ - echo rm -f $${locs}; \ - rm -f $${locs}; \ - } - -libintf_serial.la: $(libintf_serial_la_OBJECTS) $(libintf_serial_la_DEPENDENCIES) $(EXTRA_libintf_serial_la_DEPENDENCIES) - $(AM_V_CCLD)$(LINK) $(libintf_serial_la_OBJECTS) $(libintf_serial_la_LIBADD) $(LIBS) - -mostlyclean-compile: - -rm -f *.$(OBJEXT) - -distclean-compile: - -rm -f *.tab.c - -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/serial_basic.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/serial_terminal.Plo@am__quote@ - -.c.o: -@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $< - -.c.obj: -@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'` - -.c.lo: -@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $< - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs - -ID: $(am__tagged_files) - $(am__define_uniq_tagged_files); mkid -fID $$unique -tags: tags-am -TAGS: tags - -tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) - set x; \ - here=`pwd`; \ - $(am__define_uniq_tagged_files); \ - shift; \ - if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - if test $$# -gt 0; then \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - "$$@" $$unique; \ - else \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$unique; \ - fi; \ - fi -ctags: ctags-am - -CTAGS: ctags -ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) - $(am__define_uniq_tagged_files); \ - test -z "$(CTAGS_ARGS)$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && $(am__cd) $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) "$$here" -cscopelist: cscopelist-am - -cscopelist-am: $(am__tagged_files) - list='$(am__tagged_files)'; \ - case "$(srcdir)" in \ - [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ - *) sdir=$(subdir)/$(srcdir) ;; \ - esac; \ - for i in $$list; do \ - if test -f "$$i"; then \ - echo "$(subdir)/$$i"; \ - else \ - echo "$$sdir/$$i"; \ - fi; \ - done >> $(top_builddir)/cscope.files - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-am -all-am: Makefile $(LTLIBRARIES) -installdirs: -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - if test -z '$(STRIP)'; then \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - install; \ - else \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ - fi -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." - -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) -clean: clean-am - -clean-am: clean-generic clean-libtool clean-noinstLTLIBRARIES \ - mostlyclean-am - -distclean: distclean-am - -rm -rf ./$(DEPDIR) - -rm -f Makefile -distclean-am: clean-am distclean-compile distclean-generic \ - distclean-tags - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -rf ./$(DEPDIR) - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-compile mostlyclean-generic \ - mostlyclean-libtool - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: - -.MAKE: install-am install-strip - -.PHONY: CTAGS GTAGS TAGS all all-am check check-am clean clean-generic \ - clean-libtool clean-noinstLTLIBRARIES cscopelist-am ctags \ - ctags-am distclean distclean-compile distclean-generic \ - distclean-libtool distclean-tags distdir dvi dvi-am html \ - html-am info info-am install install-am install-data \ - install-data-am install-dvi install-dvi-am install-exec \ - install-exec-am install-html install-html-am install-info \ - install-info-am install-man install-pdf install-pdf-am \ - install-ps install-ps-am install-strip installcheck \ - installcheck-am installdirs maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-compile \ - mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ - tags tags-am uninstall uninstall-am - - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/src/plugins/serial/serial_basic.c b/src/plugins/serial/serial_basic.c index 21a239a..e134c9c 100644 --- a/src/plugins/serial/serial_basic.c +++ b/src/plugins/serial/serial_basic.c @@ -29,7 +29,6 @@ * LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE, * EVEN IF PPS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. */ -#define _GNU_SOURCE 1 /* Serial Interface, Basic Mode plugin. */ @@ -242,12 +241,12 @@ serial_bm_open(struct ipmi_intf * intf) return -1; } - for (i = 0; i < sizeof(rates) / sizeof(rates[0]); i++) { + for (i = 0; i < ARRAY_SIZE(rates); i++) { if (rates[i].baudrate == rate) { break; } } - if (i >= sizeof(rates) / sizeof(rates[0])) { + if (i >= ARRAY_SIZE(rates)) { lprintf(LOG_ERR, "Unsupported baud rate %i specified", rate); return -1; } @@ -613,18 +612,7 @@ serial_bm_build_msg(const struct ipmi_intf * intf, uint8_t * data = msg, seq; struct ipmb_msg_hdr * hdr = (struct ipmb_msg_hdr *) msg; struct ipmi_send_message_rq * inner_rq = NULL, * outer_rq = NULL; - int bridging_level; - - /* acquire bridging level */ - if (intf->target_addr && intf->target_addr != intf->my_addr) { - if (intf->transit_addr != 0) { - bridging_level = 2; - } else { - bridging_level = 1; - } - } else { - bridging_level = 0; - } + int bridging_level = ipmi_intf_get_bridging_level(intf); /* check overall packet length */ if(req->msg.data_len + 7 + bridging_level * 8 > max_len) { @@ -656,7 +644,7 @@ serial_bm_build_msg(const struct ipmi_intf * intf, /* inner send message request is further */ inner_rq = (outer_rq + 1); } else { - /* there is only outer send message reuest */ + /* there is only outer send message request */ inner_rq = outer_rq; } @@ -817,12 +805,14 @@ serial_bm_wait_response(struct ipmi_intf * intf, /* * Get message from receive message queue + * + * Note: kept max_len in case later use. */ static int serial_bm_get_message(struct ipmi_intf * intf, struct serial_bm_request_ctx * req_ctx, struct serial_bm_recv_ctx * read_ctx, - uint8_t * msg, size_t max_len) + uint8_t * msg, size_t __UNUSED__(max_len)) { uint8_t data[SERIAL_BM_MAX_MSG_SIZE]; struct serial_bm_request_ctx tmp_ctx; diff --git a/src/plugins/serial/serial_terminal.c b/src/plugins/serial/serial_terminal.c index 4459f64..58bca17 100644 --- a/src/plugins/serial/serial_terminal.c +++ b/src/plugins/serial/serial_terminal.c @@ -29,7 +29,6 @@ * LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE, * EVEN IF PPS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. */ -#define _GNU_SOURCE 1 /* Serial Interface, Terminal Mode plugin. */ @@ -150,7 +149,7 @@ ipmi_serial_term_open(struct ipmi_intf * intf) struct termios ti; unsigned int rate = 9600; char *p; - int i; + size_t i; if (!intf->devfile) { lprintf(LOG_ERR, "Serial device is not specified"); @@ -189,12 +188,12 @@ ipmi_serial_term_open(struct ipmi_intf * intf) return -1; } - for (i = 0; i < sizeof(rates) / sizeof(rates[0]); i++) { + for (i = 0; i < ARRAY_SIZE(rates); i++) { if (rates[i].baudrate == rate) { break; } } - if (i >= sizeof(rates) / sizeof(rates[0])) { + if (i >= ARRAY_SIZE(rates)) { lprintf(LOG_ERR, "Unsupported baud rate %i specified", rate); return -1; } @@ -354,7 +353,7 @@ serial_flush(struct ipmi_intf * intf) /* * Receive IPMI response from the device * Len: buffer size - * Returns: -1 or response lenth on success + * Returns: -1 or response length on success */ static int recv_response(struct ipmi_intf * intf, unsigned char *data, int len) @@ -395,7 +394,7 @@ recv_response(struct ipmi_intf * intf, unsigned char *data, int len) *pp = 0; /* was it an error? */ - if (strncmp(p, "ERR ", 4) == 0) { + if (!strcmp(p, "ERR ")) { serial_write_line(intf, "\r\r\r\r"); sleep(1); serial_flush(intf); @@ -474,18 +473,7 @@ serial_term_build_msg(const struct ipmi_intf * intf, struct serial_term_hdr * term_hdr = (struct serial_term_hdr *) msg; struct ipmi_send_message_rq * outer_rq = NULL; struct ipmi_send_message_rq * inner_rq = NULL; - int bridging_level; - - /* acquire bridging level */ - if (intf->target_addr && intf->target_addr != intf->my_addr) { - if (intf->transit_addr != 0) { - bridging_level = 2; - } else { - bridging_level = 1; - } - } else { - bridging_level = 0; - } + int bridging_level = ipmi_intf_get_bridging_level(intf); /* check overall packet length */ if(req->msg.data_len + 3 + bridging_level * 8 > max_len) { @@ -636,7 +624,7 @@ serial_term_send_msg(struct ipmi_intf * intf, uint8_t * msg, int msg_len) /* body */ for (i = 0; i < msg_len; i++) { - buf += sprintf( buf, "%02x", msg[i]); + buf += sprintf((char*) buf, "%02x", msg[i]); } /* stop character */ @@ -715,11 +703,13 @@ serial_term_wait_response(struct ipmi_intf * intf, /* * Get message from receive message queue + * + * Note: Kept max_len in case it's useful later. */ static int serial_term_get_message(struct ipmi_intf * intf, struct serial_term_request_ctx * req_ctx, - uint8_t * msg, size_t max_len) + uint8_t * msg, size_t __UNUSED__(max_len)) { uint8_t data[IPMI_SERIAL_MAX_RESPONSE]; struct serial_term_request_ctx tmp_ctx; diff --git a/src/plugins/usb/Makefile.in b/src/plugins/usb/Makefile.in deleted file mode 100644 index c3cfc41..0000000 --- a/src/plugins/usb/Makefile.in +++ /dev/null @@ -1,637 +0,0 @@ -# Makefile.in generated by automake 1.14.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994-2013 Free Software Foundation, Inc. - -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -VPATH = @srcdir@ -am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' -am__make_running_with_option = \ - case $${target_option-} in \ - ?) ;; \ - *) echo "am__make_running_with_option: internal error: invalid" \ - "target option '$${target_option-}' specified" >&2; \ - exit 1;; \ - esac; \ - has_opt=no; \ - sane_makeflags=$$MAKEFLAGS; \ - if $(am__is_gnu_make); then \ - sane_makeflags=$$MFLAGS; \ - else \ - case $$MAKEFLAGS in \ - *\\[\ \ ]*) \ - bs=\\; \ - sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ - | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ - esac; \ - fi; \ - skip_next=no; \ - strip_trailopt () \ - { \ - flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ - }; \ - for flg in $$sane_makeflags; do \ - test $$skip_next = yes && { skip_next=no; continue; }; \ - case $$flg in \ - *=*|--*) continue;; \ - -*I) strip_trailopt 'I'; skip_next=yes;; \ - -*I?*) strip_trailopt 'I';; \ - -*O) strip_trailopt 'O'; skip_next=yes;; \ - -*O?*) strip_trailopt 'O';; \ - -*l) strip_trailopt 'l'; skip_next=yes;; \ - -*l?*) strip_trailopt 'l';; \ - -[dEDm]) skip_next=yes;; \ - -[JT]) skip_next=yes;; \ - esac; \ - case $$flg in \ - *$$target_option*) has_opt=yes; break;; \ - esac; \ - done; \ - test $$has_opt = yes -am__make_dryrun = (target_option=n; $(am__make_running_with_option)) -am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -target_triplet = @target@ -subdir = src/plugins/usb -DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ - $(top_srcdir)/depcomp -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(install_sh) -d -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -LTLIBRARIES = $(noinst_LTLIBRARIES) -libintf_usb_la_DEPENDENCIES = $(top_builddir)/lib/libipmitool.la -am_libintf_usb_la_OBJECTS = usb.lo -libintf_usb_la_OBJECTS = $(am_libintf_usb_la_OBJECTS) -AM_V_lt = $(am__v_lt_@AM_V@) -am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@) -am__v_lt_0 = --silent -am__v_lt_1 = -AM_V_P = $(am__v_P_@AM_V@) -am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) -am__v_P_0 = false -am__v_P_1 = : -AM_V_GEN = $(am__v_GEN_@AM_V@) -am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) -am__v_GEN_0 = @echo " GEN " $@; -am__v_GEN_1 = -AM_V_at = $(am__v_at_@AM_V@) -am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) -am__v_at_0 = @ -am__v_at_1 = -DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) -depcomp = $(SHELL) $(top_srcdir)/depcomp -am__depfiles_maybe = depfiles -am__mv = mv -f -COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ - $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ - $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \ - $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ - $(AM_CFLAGS) $(CFLAGS) -AM_V_CC = $(am__v_CC_@AM_V@) -am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@) -am__v_CC_0 = @echo " CC " $@; -am__v_CC_1 = -CCLD = $(CC) -LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ - $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ - $(AM_LDFLAGS) $(LDFLAGS) -o $@ -AM_V_CCLD = $(am__v_CCLD_@AM_V@) -am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@) -am__v_CCLD_0 = @echo " CCLD " $@; -am__v_CCLD_1 = -SOURCES = $(libintf_usb_la_SOURCES) -DIST_SOURCES = $(libintf_usb_la_SOURCES) -am__can_run_installinfo = \ - case $$AM_UPDATE_INFO_DIR in \ - n|no|NO) false;; \ - *) (install-info --version) >/dev/null 2>&1;; \ - esac -am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) -# Read a list of newline-separated strings from the standard input, -# and print each of them once, without duplicates. Input order is -# *not* preserved. -am__uniquify_input = $(AWK) '\ - BEGIN { nonempty = 0; } \ - { items[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in items) print i; }; } \ -' -# Make sure the list of sources is unique. This is necessary because, -# e.g., the same source file might be shared among _SOURCES variables -# for different programs/libraries. -am__define_uniq_tagged_files = \ - list='$(am__tagged_files)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | $(am__uniquify_input)` -ETAGS = etags -CTAGS = ctags -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -ARCH = @ARCH@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BASEDIR = @BASEDIR@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DISTRO = @DISTRO@ -DLLTOOL = @DLLTOOL@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FGREP = @FGREP@ -GREP = @GREP@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INTF_BMC = @INTF_BMC@ -INTF_BMC_LIB = @INTF_BMC_LIB@ -INTF_DUMMY = @INTF_DUMMY@ -INTF_DUMMY_LIB = @INTF_DUMMY_LIB@ -INTF_FREE = @INTF_FREE@ -INTF_FREE_LIB = @INTF_FREE_LIB@ -INTF_IMB = @INTF_IMB@ -INTF_IMB_LIB = @INTF_IMB_LIB@ -INTF_LAN = @INTF_LAN@ -INTF_LANPLUS = @INTF_LANPLUS@ -INTF_LANPLUS_LIB = @INTF_LANPLUS_LIB@ -INTF_LAN_LIB = @INTF_LAN_LIB@ -INTF_LIPMI = @INTF_LIPMI@ -INTF_LIPMI_LIB = @INTF_LIPMI_LIB@ -INTF_OPEN = @INTF_OPEN@ -INTF_OPEN_LIB = @INTF_OPEN_LIB@ -INTF_SERIAL = @INTF_SERIAL@ -INTF_SERIAL_LIB = @INTF_SERIAL_LIB@ -INTF_USB = @INTF_USB@ -INTF_USB_LIB = @INTF_USB_LIB@ -IPMITOOL_INTF_LIB = @IPMITOOL_INTF_LIB@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ -MKDIR_P = @MKDIR_P@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OS = @OS@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -POW_LIB = @POW_LIB@ -PSTAMP = @PSTAMP@ -RANLIB = @RANLIB@ -RPMBUILD = @RPMBUILD@ -RPM_RELEASE = @RPM_RELEASE@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -VERSION = @VERSION@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_configure_args = @ac_configure_args@ -ac_ct_AR = @ac_ct_AR@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target = @target@ -target_alias = @target_alias@ -target_cpu = @target_cpu@ -target_os = @target_os@ -target_vendor = @target_vendor@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -MAINTAINERCLEANFILES = Makefile.in -AM_CPPFLAGS = -I$(top_srcdir)/include -EXTRA_LTLIBRARIES = libintf_usb.la -noinst_LTLIBRARIES = @INTF_USB_LIB@ -libintf_usb_la_LIBADD = $(top_builddir)/lib/libipmitool.la -libintf_usb_la_SOURCES = usb.c -all: all-am - -.SUFFIXES: -.SUFFIXES: .c .lo .o .obj -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/plugins/usb/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign src/plugins/usb/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): - -clean-noinstLTLIBRARIES: - -test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES) - @list='$(noinst_LTLIBRARIES)'; \ - locs=`for p in $$list; do echo $$p; done | \ - sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \ - sort -u`; \ - test -z "$$locs" || { \ - echo rm -f $${locs}; \ - rm -f $${locs}; \ - } - -libintf_usb.la: $(libintf_usb_la_OBJECTS) $(libintf_usb_la_DEPENDENCIES) $(EXTRA_libintf_usb_la_DEPENDENCIES) - $(AM_V_CCLD)$(LINK) $(libintf_usb_la_OBJECTS) $(libintf_usb_la_LIBADD) $(LIBS) - -mostlyclean-compile: - -rm -f *.$(OBJEXT) - -distclean-compile: - -rm -f *.tab.c - -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/usb.Plo@am__quote@ - -.c.o: -@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $< - -.c.obj: -@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'` - -.c.lo: -@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $< - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs - -ID: $(am__tagged_files) - $(am__define_uniq_tagged_files); mkid -fID $$unique -tags: tags-am -TAGS: tags - -tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) - set x; \ - here=`pwd`; \ - $(am__define_uniq_tagged_files); \ - shift; \ - if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - if test $$# -gt 0; then \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - "$$@" $$unique; \ - else \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$unique; \ - fi; \ - fi -ctags: ctags-am - -CTAGS: ctags -ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) - $(am__define_uniq_tagged_files); \ - test -z "$(CTAGS_ARGS)$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && $(am__cd) $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) "$$here" -cscopelist: cscopelist-am - -cscopelist-am: $(am__tagged_files) - list='$(am__tagged_files)'; \ - case "$(srcdir)" in \ - [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ - *) sdir=$(subdir)/$(srcdir) ;; \ - esac; \ - for i in $$list; do \ - if test -f "$$i"; then \ - echo "$(subdir)/$$i"; \ - else \ - echo "$$sdir/$$i"; \ - fi; \ - done >> $(top_builddir)/cscope.files - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-am -all-am: Makefile $(LTLIBRARIES) -installdirs: -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - if test -z '$(STRIP)'; then \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - install; \ - else \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ - fi -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." - -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) -clean: clean-am - -clean-am: clean-generic clean-libtool clean-noinstLTLIBRARIES \ - mostlyclean-am - -distclean: distclean-am - -rm -rf ./$(DEPDIR) - -rm -f Makefile -distclean-am: clean-am distclean-compile distclean-generic \ - distclean-tags - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -rf ./$(DEPDIR) - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-compile mostlyclean-generic \ - mostlyclean-libtool - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: - -.MAKE: install-am install-strip - -.PHONY: CTAGS GTAGS TAGS all all-am check check-am clean clean-generic \ - clean-libtool clean-noinstLTLIBRARIES cscopelist-am ctags \ - ctags-am distclean distclean-compile distclean-generic \ - distclean-libtool distclean-tags distdir dvi dvi-am html \ - html-am info info-am install install-am install-data \ - install-data-am install-dvi install-dvi-am install-exec \ - install-exec-am install-html install-html-am install-info \ - install-info-am install-man install-pdf install-pdf-am \ - install-ps install-ps-am install-strip installcheck \ - installcheck-am installdirs maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-compile \ - mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ - tags tags-am uninstall uninstall-am - - # - # Copyright (c) 2015 American Megatrends, Inc. - # All rights reserved. - # - # Redistribution and use in source and binary forms, with or without - # modification,are permitted provided that the following conditions are met: - # - # 1. Redistributions of source code must retain the above copyright notice, - # this list of conditions and the following disclaimer. - # - # 2. Redistributions in binary form must reproduce the above copyright notice, - # this list of conditions and the following disclaimer in the documentation - # and/or other materials provided with the distribution. - # - # 3. Neither the name of the copyright holder nor the names of its contributors - # may be used to endorse or promote products derived from this software - # without specific prior written permission. - # - # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - # AND ANY EXPRESS OR IMPLIED WARRANTIES,INCLUDING, BUT NOT LIMITED TO, THE - # IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - # ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE - # LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - # CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - # SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - # INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - # CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - # ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - # POSSIBILITY OF SUCH DAMAGE. - # - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/src/plugins/usb/usb.c b/src/plugins/usb/usb.c index 0049400..d6dced3 100644 --- a/src/plugins/usb/usb.c +++ b/src/plugins/usb/usb.c @@ -30,8 +30,6 @@ * POSSIBILITY OF SUCH DAMAGE. */ -#define _BSD_SOURCE - #include <ipmitool/helper.h> #include <ipmitool/log.h> #include <ipmitool/bswap.h> @@ -123,19 +121,19 @@ scsiProbeNew(int *num_ami_devices, int *sg_nos) FILE *fp; fp = fopen("/proc/scsi/sg/device_strs", "r"); - if (fp == NULL) { + if (!fp) { /* Return 1 on error */ return 1; } while (1) { /* Read line by line and search for "AMI" */ - if (fgets(linebuf, 80, fp) == NULL) { + if (!fgets(linebuf, 80, fp)) { break; } if (sscanf(linebuf, "%s", vendor) == 1) { - if (strncmp(vendor, "AMI", strlen("AMI")) == 0) { + if (!strcmp(vendor, "AMI")) { numdevfound++; sg_nos[numdevfound - 1] = lineno; if (numdevfound == inplen) { @@ -147,7 +145,7 @@ scsiProbeNew(int *num_ami_devices, int *sg_nos) } *num_ami_devices = numdevfound; - if (fp != NULL) { + if (fp) { fclose(fp); fp = NULL; } @@ -251,7 +249,7 @@ IsG2Drive(int cd_desc) return 1; } - if (strncmp(szSignature, "$$$AMI$$$", strlen("$$$AMI$$$")) != 0) { + if (strcmp(szSignature, "$$$AMI$$$")) { lprintf(LOG_ERR, "IsG2Drive:Signature mismatch when ID command sent"); return 1; @@ -605,7 +603,7 @@ ipmi_usb_send_cmd(struct ipmi_intf *intf, struct ipmi_rq *req) rsp.ccode = rsp.data[0]; /* Save response data for caller */ - if ((rsp.ccode == 0) && (rsp.data_len > 0)) { + if (!rsp.ccode && rsp.data_len > 0) { memmove(rsp.data, rsp.data + 1, rsp.data_len - 1); rsp.data[rsp.data_len] = 0; rsp.data_len -= 1; |