From 26e1ac5bc4e2ba9c26f1384e6c1dc06ec078a7d6 Mon Sep 17 00:00:00 2001 From: Matthew Johnson Date: Sun, 22 Mar 2009 17:04:37 +0000 Subject: final ipmitool changes --- debian/patches/20_ipmi_isol | 695 -------------------------------------------- debian/patches/series | 1 - 2 files changed, 696 deletions(-) delete mode 100644 debian/patches/20_ipmi_isol diff --git a/debian/patches/20_ipmi_isol b/debian/patches/20_ipmi_isol deleted file mode 100644 index 85e684f..0000000 --- a/debian/patches/20_ipmi_isol +++ /dev/null @@ -1,695 +0,0 @@ -## 20_ipmi_isol.dpatch by -## -## 20_ipmi_isol, closes #412816 -Index: ipmitool-1.8.11/include/ipmitool/ipmi_isol.h.orig -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ ipmitool-1.8.11/include/ipmitool/ipmi_isol.h.orig 2009-03-22 16:48:34.633972562 +0000 -@@ -0,0 +1,56 @@ -+/* -+ * Copyright (c) 2003 Sun Microsystems, Inc. All Rights Reserved. -+ * -+ * Redistribution and use in source and binary forms, with or without -+ * modification, are permitted provided that the following conditions -+ * are met: -+ * -+ * Redistribution of source code must retain the above copyright -+ * notice, this list of conditions and the following disclaimer. -+ * -+ * Redistribution in binary form must reproduce the above copyright -+ * notice, this list of conditions and the following disclaimer in the -+ * documentation and/or other materials provided with the distribution. -+ * -+ * Neither the name of Sun Microsystems, Inc. or the names of -+ * contributors may be used to endorse or promote products derived -+ * from this software without specific prior written permission. -+ * -+ * This software is provided "AS IS," without a warranty of any kind. -+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, -+ * INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A -+ * PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY EXCLUDED. -+ * SUN MICROSYSTEMS, INC. ("SUN") AND ITS LICENSORS SHALL NOT BE LIABLE -+ * FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING -+ * OR DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES. IN NO EVENT WILL -+ * SUN OR ITS LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA, -+ * OR FOR DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR -+ * PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF -+ * LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE, -+ * EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. -+ */ -+ -+#ifndef IPMI_ISOL_H -+#define IPMI_ISOL_H -+ -+#include -+ -+#define ACTIVATE_ISOL 0x01 -+#define SET_ISOL_CONFIG 0x03 -+#define GET_ISOL_CONFIG 0x04 -+ -+#define ISOL_ENABLE_PARAM 0x01 -+#define ISOL_AUTHENTICATION_PARAM 0x02 -+#define ISOL_ENABLE_FLAG 0x01 -+#define ISOL_PRIVILEGE_LEVEL_USER 0x02 -+#define ISOL_BAUD_RATE_PARAM 0x05 -+#define ISOL_BAUD_RATE_9600 0x06 -+#define ISOL_BAUD_RATE_19200 0x07 -+#define ISOL_BAUD_RATE_38400 0x08 -+#define ISOL_BAUD_RATE_57600 0x09 -+#define ISOL_BAUD_RATE_115200 0x0A -+#define ISOL_PREFERRED_BAUD_RATE 0x07 -+ -+int ipmi_isol_main(struct ipmi_intf *, int, char **); -+ -+#endif /* IPMI_SOL_H */ -Index: ipmitool-1.8.11/lib/ipmi_isol.c.orig -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ ipmitool-1.8.11/lib/ipmi_isol.c.orig 2009-03-22 16:48:34.661974936 +0000 -@@ -0,0 +1,191 @@ -+/* -+ * Copyright (c) 2003 Sun Microsystems, Inc. All Rights Reserved. -+ * -+ * Redistribution and use in source and binary forms, with or without -+ * modification, are permitted provided that the following conditions -+ * are met: -+ * -+ * Redistribution of source code must retain the above copyright -+ * notice, this list of conditions and the following disclaimer. -+ * -+ * Redistribution in binary form must reproduce the above copyright -+ * notice, this list of conditions and the following disclaimer in the -+ * documentation and/or other materials provided with the distribution. -+ * -+ * Neither the name of Sun Microsystems, Inc. or the names of -+ * contributors may be used to endorse or promote products derived -+ * from this software without specific prior written permission. -+ * -+ * This software is provided "AS IS," without a warranty of any kind. -+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, -+ * INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A -+ * PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY EXCLUDED. -+ * SUN MICROSYSTEMS, INC. ("SUN") AND ITS LICENSORS SHALL NOT BE LIABLE -+ * FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING -+ * OR DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES. IN NO EVENT WILL -+ * SUN OR ITS LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA, -+ * OR FOR DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR -+ * PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF -+ * LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE, -+ * EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. -+ */ -+ -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+const struct valstr ipmi_isol_baud_vals[] = { -+ { ISOL_BAUD_RATE_9600, "9600" }, -+ { ISOL_BAUD_RATE_19200, "19200" }, -+ { ISOL_BAUD_RATE_38400, "38400" }, -+ { ISOL_BAUD_RATE_57600, "57600" }, -+ { ISOL_BAUD_RATE_115200, "115200" }, -+ { 0x00, NULL } -+}; -+ -+extern int verbose; -+ -+static int ipmi_isol_setup(struct ipmi_intf * intf, char baudsetting) -+{ -+ struct ipmi_rs * rsp; -+ struct ipmi_rq req; -+ unsigned char data[6]; -+ -+ /* TEST FOR AVAILABILITY */ -+ -+ memset(data, 0, 6); -+ data[0] = 0x00; -+ data[1] = ISOL_ENABLE_PARAM; -+ data[2] = ISOL_ENABLE_FLAG; -+ -+ memset(&req, 0, sizeof(req)); -+ req.msg.netfn = IPMI_NETFN_ISOL; -+ req.msg.cmd = SET_ISOL_CONFIG; -+ req.msg.data = data; -+ req.msg.data_len = 3; -+ -+ rsp = intf->sendrecv(intf, &req); -+ if (rsp == NULL) { -+ lprintf(LOG_ERR, "Error in Set ISOL Config Command"); -+ return -1; -+ } -+ if (rsp->ccode == 0xc1) { -+ lprintf(LOG_ERR, "IPMI v1.5 Serial Over Lan (ISOL) not supported!"); -+ return -1; -+ } -+ if (rsp->ccode > 0) { -+ lprintf(LOG_ERR, "Error in Set ISOL Config Command: %s", -+ val2str(rsp->ccode, completion_code_vals)); -+ return -1; -+ } -+ -+ /* GET ISOL CONFIG */ -+ -+ memset(data, 0, 6); -+ data[0] = 0x00; -+ data[1] = ISOL_AUTHENTICATION_PARAM; -+ data[2] = 0x00; /* block */ -+ data[3] = 0x00; /* selector */ -+ req.msg.cmd = GET_ISOL_CONFIG; -+ req.msg.data_len = 4; -+ -+ rsp = intf->sendrecv(intf, &req); -+ if (rsp == NULL) { -+ lprintf(LOG_ERR, "Error in Get ISOL Config Command"); -+ return -1; -+ } -+ if (rsp->ccode > 0) { -+ lprintf(LOG_ERR, "Error in Get ISOL Config Command: %s", -+ val2str(rsp->ccode, completion_code_vals)); -+ return -1; -+ } -+ -+ if (verbose > 1) -+ printbuf(rsp->data, rsp->data_len, "ISOL Config"); -+ -+ /* SET ISOL CONFIG - AUTHENTICATION */ -+ -+ memset(data, 0, 6); -+ data[0] = 0x00; -+ data[1] = ISOL_AUTHENTICATION_PARAM; -+ data[2] = ISOL_PRIVILEGE_LEVEL_USER | (rsp->data[1] & 0x80); -+ req.msg.cmd = SET_ISOL_CONFIG; -+ req.msg.data_len = 3; -+ -+ rsp = intf->sendrecv(intf, &req); -+ if (rsp == NULL) { -+ lprintf(LOG_ERR, "Error in Set ISOL Config (Authentication) Command"); -+ return -1; -+ } -+ if (rsp->ccode > 0) { -+ lprintf(LOG_ERR, "Error in Set ISOL Config (Authentication) Command: %s", -+ val2str(rsp->ccode, completion_code_vals)); -+ return -1; -+ } -+ -+ /* SET ISOL CONFIG - BAUD RATE */ -+ -+ memset(data, 0, 6); -+ data[0] = 0x00; -+ data[1] = ISOL_BAUD_RATE_PARAM; -+ data[2] = baudsetting; -+ req.msg.cmd = SET_ISOL_CONFIG; -+ req.msg.data_len = 3; -+ -+ rsp = intf->sendrecv(intf, &req); -+ if (rsp == NULL) { -+ lprintf(LOG_ERR, "Error in Set ISOL Config (Baud Rate) Command"); -+ return -1; -+ } -+ if (rsp->ccode > 0) { -+ lprintf(LOG_ERR, "Error in Set ISOL Config (Baud Rate) Command: %s", -+ val2str(rsp->ccode, completion_code_vals)); -+ return -1; -+ } -+ -+ printf("Set ISOL Baud Rate to %s\n", -+ val2str(baudsetting, ipmi_isol_baud_vals)); -+ -+ return 0; -+} -+ -+int ipmi_isol_main(struct ipmi_intf * intf, int argc, char ** argv) -+{ -+ int ret = 0; -+ -+ if (argc < 2 || strncmp(argv[0], "help", 4) == 0) { -+ lprintf(LOG_NOTICE, "ISOL Commands: setup "); -+ lprintf(LOG_NOTICE, "ISOL Baud Rates: 9600, 19200, 38400, 57600, 115200"); -+ return 0; -+ } -+ -+ if (strncmp(argv[0], "setup", 5) == 0) { -+ if (strncmp(argv[1], "9600", 4) == 0) { -+ ret = ipmi_isol_setup(intf, ISOL_BAUD_RATE_9600); -+ } -+ else if (strncmp(argv[1], "19200", 5) == 0) { -+ ret = ipmi_isol_setup(intf, ISOL_BAUD_RATE_19200); -+ } -+ else if (strncmp(argv[1], "38400", 5) == 0) { -+ ret = ipmi_isol_setup(intf, ISOL_BAUD_RATE_38400); -+ } -+ else if (strncmp(argv[1], "57600", 5) == 0) { -+ ret = ipmi_isol_setup(intf, ISOL_BAUD_RATE_57600); -+ } -+ else if (strncmp(argv[1], "115200", 6) == 0) { -+ ret = ipmi_isol_setup(intf, ISOL_BAUD_RATE_115200); -+ } -+ else { -+ lprintf(LOG_ERR, "ISOL - Unsupported baud rate: %s", argv[1]); -+ ret = -1; -+ } -+ } -+ return ret; -+} -Index: ipmitool-1.8.11/src/plugins/lan/lan.c -=================================================================== ---- ipmitool-1.8.11.orig/src/plugins/lan/lan.c 2009-02-25 20:38:53.000000000 +0000 -+++ ipmitool-1.8.11/src/plugins/lan/lan.c 2009-03-22 16:48:34.681976632 +0000 -@@ -1448,6 +1448,430 @@ - return rsp; - } - -+/* -+ * IPMI SOL Payload Format -+ * +--------------------+ -+ * | rmcp.ver | 4 bytes -+ * | rmcp.__reserved | -+ * | rmcp.seq | -+ * | rmcp.class | -+ * +--------------------+ -+ * | session.authtype | 9 bytes -+ * | session.seq | -+ * | session.id | -+ * +--------------------+ -+ * | message length | 1 byte -+ * +--------------------+ -+ * | sol.seq | 5 bytes -+ * | sol.ack_seq | -+ * | sol.acc_count | -+ * | sol.control | -+ * | sol.__reserved | -+ * +--------------------+ -+ * | [request data] | data_len bytes -+ * +--------------------+ -+ */ -+uint8_t * ipmi_lan_build_sol_msg(struct ipmi_intf * intf, -+ struct ipmi_v2_payload * payload, -+ int * llen) -+{ -+ struct rmcp_hdr rmcp = { -+ .ver = RMCP_VERSION_1, -+ .class = RMCP_CLASS_IPMI, -+ .seq = 0xff, -+ }; -+ struct ipmi_session * session = intf->session; -+ -+ /* msg will hold the entire message to be sent */ -+ uint8_t * msg; -+ -+ int len = 0; -+ -+ len = sizeof(rmcp) + // RMCP Header (4) -+ 10 + // IPMI Session Header -+ 5 + // SOL header -+ payload->payload.sol_packet.character_count; // The actual payload -+ -+ msg = malloc(len); -+ if (msg == NULL) { -+ lprintf(LOG_ERR, "ipmitool: malloc failure"); -+ return; -+ } -+ memset(msg, 0, len); -+ -+ /* rmcp header */ -+ memcpy(msg, &rmcp, sizeof(rmcp)); -+ len = sizeof(rmcp); -+ -+ /* ipmi session header */ -+ msg[len++] = 0; /* SOL is always authtype = NONE */ -+ msg[len++] = session->in_seq & 0xff; -+ msg[len++] = (session->in_seq >> 8) & 0xff; -+ msg[len++] = (session->in_seq >> 16) & 0xff; -+ msg[len++] = (session->in_seq >> 24) & 0xff; -+ -+ msg[len++] = session->session_id & 0xff; -+ msg[len++] = (session->session_id >> 8) & 0xff; -+ msg[len++] = (session->session_id >> 16) & 0xff; -+ msg[len++] = ((session->session_id >> 24) + 0x10) & 0xff; /* Add 0x10 to MSB for SOL */ -+ -+ msg[len++] = payload->payload.sol_packet.character_count + 5; -+ -+ /* sol header */ -+ msg[len++] = payload->payload.sol_packet.packet_sequence_number; -+ msg[len++] = payload->payload.sol_packet.acked_packet_number; -+ msg[len++] = payload->payload.sol_packet.accepted_character_count; -+ msg[len] = payload->payload.sol_packet.is_nack ? 0x40 : 0; -+ msg[len] |= payload->payload.sol_packet.assert_ring_wor ? 0x20 : 0; -+ msg[len] |= payload->payload.sol_packet.generate_break ? 0x10 : 0; -+ msg[len] |= payload->payload.sol_packet.deassert_cts ? 0x08 : 0; -+ msg[len] |= payload->payload.sol_packet.deassert_dcd_dsr ? 0x04 : 0; -+ msg[len] |= payload->payload.sol_packet.flush_inbound ? 0x02 : 0; -+ msg[len++] |= payload->payload.sol_packet.flush_outbound ? 0x01 : 0; -+ -+ len++; /* On SOL there's and additional fifth byte before the data starts */ -+ -+ if (payload->payload.sol_packet.character_count) { -+ /* We may have data to add */ -+ memcpy(msg + len, -+ payload->payload.sol_packet.data, -+ payload->payload.sol_packet.character_count); -+ len += payload->payload.sol_packet.character_count; -+ } -+ -+ session->in_seq++; -+ if (session->in_seq == 0) -+ session->in_seq++; -+ -+ *llen = len; -+ return msg; -+} -+ -+/* -+ * is_sol_packet -+ */ -+static int -+is_sol_packet(struct ipmi_rs * rsp) -+{ -+ return (rsp && -+ (rsp->session.payloadtype == IPMI_PAYLOAD_TYPE_SOL)); -+} -+ -+ -+ -+/* -+ * sol_response_acks_packet -+ */ -+static int -+sol_response_acks_packet(struct ipmi_rs * rsp, -+ struct ipmi_v2_payload * payload) -+{ -+ return (is_sol_packet(rsp) && -+ payload && -+ (payload->payload_type == IPMI_PAYLOAD_TYPE_SOL) && -+ (rsp->payload.sol_packet.acked_packet_number == -+ payload->payload.sol_packet.packet_sequence_number)); -+} -+ -+/* -+ * ipmi_lan_send_sol_payload -+ * -+ */ -+static struct ipmi_rs * -+ipmi_lan_send_sol_payload(struct ipmi_intf * intf, -+ struct ipmi_v2_payload * payload) -+{ -+ struct ipmi_rs * rsp = NULL; -+ uint8_t * msg; -+ int len; -+ int try = 0; -+ -+ if (intf->opened == 0 && intf->open != NULL) { -+ if (intf->open(intf) < 0) -+ return NULL; -+ } -+ -+ msg = ipmi_lan_build_sol_msg(intf, payload, &len); -+ if (len <= 0 || msg == NULL) { -+ lprintf(LOG_ERR, "Invalid SOL payload packet"); -+ if (msg != NULL) -+ free(msg); -+ return NULL; -+ } -+ -+ lprintf(LOG_DEBUG, ">> SENDING A SOL MESSAGE\n"); -+ -+ for (;;) { -+ if (ipmi_lan_send_packet(intf, msg, len) < 0) { -+ try++; -+ usleep(5000); -+ continue; -+ } -+ -+ /* if we are set to noanswer we do not expect response */ -+ if (intf->noanswer) -+ break; -+ -+ if (payload->payload.sol_packet.packet_sequence_number == 0) { -+ /* We're just sending an ACK. No need to retry. */ -+ break; -+ } -+ -+ usleep(100); -+ -+ rsp = ipmi_lan_recv_sol(intf); /* Grab the next packet */ -+ -+ if (sol_response_acks_packet(rsp, payload)) -+ break; -+ -+ else if (is_sol_packet(rsp) && rsp->data_len) -+ { -+ /* -+ * We're still waiting for our ACK, but we more data from -+ * the BMC -+ */ -+ intf->session->sol_data.sol_input_handler(rsp); -+ } -+ -+ usleep(5000); -+ if (++try >= intf->session->retry) { -+ lprintf(LOG_DEBUG, " No response from remote controller"); -+ break; -+ } -+ } -+ -+ return rsp; -+} -+ -+/* -+ * is_sol_partial_ack -+ * -+ * Determine if the response is a partial ACK/NACK that indicates -+ * we need to resend part of our packet. -+ * -+ * returns the number of characters we need to resend, or -+ * 0 if this isn't an ACK or we don't need to resend anything -+ */ -+static int is_sol_partial_ack(struct ipmi_v2_payload * v2_payload, -+ struct ipmi_rs * rsp) -+{ -+ int chars_to_resend = 0; -+ -+ if (v2_payload && -+ rsp && -+ is_sol_packet(rsp) && -+ sol_response_acks_packet(rsp, v2_payload) && -+ (rsp->payload.sol_packet.accepted_character_count < -+ v2_payload->payload.sol_packet.character_count)) -+ { -+ if (rsp->payload.sol_packet.accepted_character_count == 0) { -+ /* We should not resend data */ -+ chars_to_resend = 0; -+ } -+ else -+ { -+ chars_to_resend = -+ v2_payload->payload.sol_packet.character_count - -+ rsp->payload.sol_packet.accepted_character_count; -+ } -+ } -+ -+ return chars_to_resend; -+} -+ -+/* -+ * set_sol_packet_sequence_number -+ */ -+static void set_sol_packet_sequence_number(struct ipmi_intf * intf, -+ struct ipmi_v2_payload * v2_payload) -+{ -+ /* Keep our sequence number sane */ -+ if (intf->session->sol_data.sequence_number > 0x0F) -+ intf->session->sol_data.sequence_number = 1; -+ -+ v2_payload->payload.sol_packet.packet_sequence_number = -+ intf->session->sol_data.sequence_number++; -+} -+ -+/* -+ * ipmi_lan_send_sol -+ * -+ * Sends a SOL packet.. We handle partial ACK/NACKs from the BMC here. -+ * -+ * Returns a pointer to the SOL ACK we received, or -+ * 0 on failure -+ * -+ */ -+struct ipmi_rs * -+ipmi_lan_send_sol(struct ipmi_intf * intf, -+ struct ipmi_v2_payload * v2_payload) -+{ -+ struct ipmi_rs * rsp; -+ int chars_to_resend = 0; -+ -+ v2_payload->payload_type = IPMI_PAYLOAD_TYPE_SOL; -+ -+ /* -+ * Payload length is just the length of the character -+ * data here. -+ */ -+ v2_payload->payload.sol_packet.acked_packet_number = 0; /* NA */ -+ -+ set_sol_packet_sequence_number(intf, v2_payload); -+ -+ v2_payload->payload.sol_packet.accepted_character_count = 0; /* NA */ -+ -+ rsp = ipmi_lan_send_sol_payload(intf, v2_payload); -+ -+ /* Determine if we need to resend some of our data */ -+ chars_to_resend = is_sol_partial_ack(v2_payload, rsp); -+ -+ while (chars_to_resend) -+ { -+ /* -+ * We first need to handle any new data we might have -+ * received in our NACK -+ */ -+ if (rsp->data_len) -+ intf->session->sol_data.sol_input_handler(rsp); -+ -+ set_sol_packet_sequence_number(intf, v2_payload); -+ -+ /* Just send the required data */ -+ memmove(v2_payload->payload.sol_packet.data, -+ v2_payload->payload.sol_packet.data + -+ rsp->payload.sol_packet.accepted_character_count, -+ chars_to_resend); -+ -+ v2_payload->payload.sol_packet.character_count = chars_to_resend; -+ -+ rsp = ipmi_lan_send_sol_payload(intf, v2_payload); -+ -+ chars_to_resend = is_sol_partial_ack(v2_payload, rsp); -+ } -+ -+ return rsp; -+} -+ -+/* -+ * check_sol_packet_for_new_data -+ * -+ * Determine whether the SOL packet has already been seen -+ * and whether the packet has new data for us. -+ * -+ * This function has the side effect of removing an previously -+ * seen data, and moving new data to the front. -+ * -+ * It also "Remembers" the data so we don't get repeats. -+ * -+ */ -+static int -+check_sol_packet_for_new_data(struct ipmi_intf * intf, -+ struct ipmi_rs *rsp) -+{ -+ static uint8_t last_received_sequence_number = 0; -+ static uint8_t last_received_byte_count = 0; -+ int new_data_size = 0; -+ -+ if (rsp && -+ (rsp->session.payloadtype == IPMI_PAYLOAD_TYPE_SOL)) -+ -+ { -+ uint8_t unaltered_data_len = rsp->data_len; -+ if (rsp->payload.sol_packet.packet_sequence_number == -+ last_received_sequence_number) -+ { -+ /* -+ * This is the same as the last packet, but may include -+ * extra data -+ */ -+ new_data_size = rsp->data_len - last_received_byte_count; -+ -+ if (new_data_size > 0) -+ { -+ /* We have more data to process */ -+ memmove(rsp->data, -+ rsp->data + -+ rsp->data_len - new_data_size, -+ new_data_size); -+ } -+ -+ rsp->data_len = new_data_size; -+ } -+ -+ /* -+ *Rember the data for next round -+ */ -+ if (rsp && rsp->payload.sol_packet.packet_sequence_number) -+ { -+ last_received_sequence_number = -+ rsp->payload.sol_packet.packet_sequence_number; -+ last_received_byte_count = unaltered_data_len; -+ } -+ } -+ -+ return new_data_size; -+} -+ -+/* -+ * ack_sol_packet -+ * -+ * Provided the specified packet looks reasonable, ACK it. -+ */ -+static void -+ack_sol_packet(struct ipmi_intf * intf, -+ struct ipmi_rs * rsp) -+{ -+ if (rsp && -+ (rsp->session.payloadtype == IPMI_PAYLOAD_TYPE_SOL) && -+ (rsp->payload.sol_packet.packet_sequence_number)) -+ { -+ struct ipmi_v2_payload ack; -+ -+ memset(&ack, 0, sizeof(struct ipmi_v2_payload)); -+ -+ ack.payload_type = IPMI_PAYLOAD_TYPE_SOL; -+ -+ /* -+ * Payload length is just the length of the character -+ * data here. -+ */ -+ ack.payload_length = 0; -+ -+ /* ACK packets have sequence numbers of 0 */ -+ ack.payload.sol_packet.packet_sequence_number = 0; -+ -+ ack.payload.sol_packet.acked_packet_number = -+ rsp->payload.sol_packet.packet_sequence_number; -+ -+ ack.payload.sol_packet.accepted_character_count = rsp->data_len; -+ -+ ipmi_lan_send_sol_payload(intf, &ack); -+ } -+} -+ -+/* -+ * ipmi_recv_sol -+ * -+ * Receive a SOL packet and send an ACK in response. -+ * -+ */ -+struct ipmi_rs * -+ipmi_lan_recv_sol(struct ipmi_intf * intf) -+{ -+ struct ipmi_rs * rsp = ipmi_lan_poll_recv(intf); -+ -+ ack_sol_packet(intf, rsp); -+ -+ /* -+ * Remembers the data sent, and alters the data to just -+ * include the new stuff. -+ */ -+ check_sol_packet_for_new_data(intf, rsp); -+ -+ return rsp; -+} -+ - /* send a get device id command to keep session active */ - static int - ipmi_lan_keepalive(struct ipmi_intf * intf) diff --git a/debian/patches/series b/debian/patches/series index 8b22901..f9de264 100644 --- a/debian/patches/series +++ b/debian/patches/series @@ -1,2 +1 @@ -20_ipmi_isol 99_readme_typo -- cgit v1.2.3