From e26c0906b6da8b69ce451ddda695a24b8c606acf Mon Sep 17 00:00:00 2001 From: Matthew Johnson Date: Thu, 13 Dec 2007 10:37:53 +0000 Subject: patches and new version --- debian/changelog | 10 +- debian/compat | 1 + debian/control | 4 +- debian/patches/00list | 4 +- debian/patches/10_ipmi_lanp.dpatch | 72 ++ debian/patches/20-linux-libc-dev.dpatch | 29 - debian/patches/20_ipmi_impi.dpatch | 340 ++++++ debian/patches/20_ipmi_isol.dpatch | 1857 +++++++++++++++++++++++++++++++ debian/rules | 46 +- debian/watch | 3 + 10 files changed, 2308 insertions(+), 58 deletions(-) create mode 100644 debian/compat create mode 100644 debian/patches/10_ipmi_lanp.dpatch delete mode 100644 debian/patches/20-linux-libc-dev.dpatch create mode 100644 debian/patches/20_ipmi_impi.dpatch create mode 100644 debian/patches/20_ipmi_isol.dpatch create mode 100644 debian/watch diff --git a/debian/changelog b/debian/changelog index c5d9592..77979da 100644 --- a/debian/changelog +++ b/debian/changelog @@ -2,8 +2,14 @@ ipmitool (1.8.9-1) unstable; urgency=low * Adopt package (Closes: #432027) * New upstream release - - -- Matthew Johnson Thu, 13 Dec 2007 09:41:47 +0000 + - Closes: #422864 + - Closes: #377628 + * Add patch to fix segfault (Closes: #389741) + * Add patch to fix isol (Closes: #412816) + * Add watch file + * Move from DH_COMPAT to debian/compat + + -- Matthew Johnson Thu, 13 Dec 2007 10:25:22 +0000 ipmitool (1.8.8-3.1) unstable; urgency=high diff --git a/debian/compat b/debian/compat new file mode 100644 index 0000000..7ed6ff8 --- /dev/null +++ b/debian/compat @@ -0,0 +1 @@ +5 diff --git a/debian/control b/debian/control index bde6a60..b937781 100644 --- a/debian/control +++ b/debian/control @@ -1,8 +1,8 @@ Source: ipmitool Section: utils Priority: optional -Maintainer: Petter Reinholdtsen -Uploaders: Duncan Laurie +Maintainer: Matthew Johnson +Uploaders: Build-Depends: debhelper (>> 4.0.0), libreadline5-dev | libreadline-dev, libssl-dev, dpatch Standards-Version: 3.7.2 diff --git a/debian/patches/00list b/debian/patches/00list index 1db6d00..3b14fa3 100644 --- a/debian/patches/00list +++ b/debian/patches/00list @@ -1 +1,3 @@ -20-linux-libc-dev.dpatch +10_ipmi_lanp.dpatch +20_ipmi_isol.dpatch +20_ipmi_impi.dpatch diff --git a/debian/patches/10_ipmi_lanp.dpatch b/debian/patches/10_ipmi_lanp.dpatch new file mode 100644 index 0000000..4e7edfd --- /dev/null +++ b/debian/patches/10_ipmi_lanp.dpatch @@ -0,0 +1,72 @@ +#! /bin/sh /usr/share/dpatch/dpatch-run +## 10_ipmi_lanp.dpatch by +## +## All lines beginning with `## DP:' are a description of the patch. +## DP: 10_ipmi_lanp closes #389741 + +@DPATCH@ + +--- ipmitool-1.8.9.orig/lib/ipmi_lanp.c 2007-03-06 22:15:36.000000000 +0000 ++++ ipmitool-1.8.9/lib/ipmi_lanp.c 2007-12-13 10:06:18.045813387 +0000 +@@ -1489,28 +1489,43 @@ + } + } + /* ip address */ +- else if ((strncmp(argv[1], "ipaddr", 6) == 0) && +- (get_cmdline_ipaddr(argv[2], data) == 0)) { +- printf("Setting LAN %s to %d.%d.%d.%d\n", +- ipmi_lan_params[IPMI_LANP_IP_ADDR].desc, +- data[0], data[1], data[2], data[3]); +- rc = set_lan_param(intf, chan, IPMI_LANP_IP_ADDR, data, 4); ++ else if (strncmp(argv[1], "ipaddr", 6) == 0) { ++ if ( argc < 3 || strncmp(argv[2], "help", 4) == 0 || ++ get_cmdline_ipaddr(argv[2], data) != 0 ) { ++ lprintf(LOG_NOTICE, "lan set ipaddr "); ++ } ++ else { ++ printf("Setting LAN %s to %d.%d.%d.%d\n", ++ ipmi_lan_params[IPMI_LANP_IP_ADDR].desc, ++ data[0], data[1], data[2], data[3]); ++ rc = set_lan_param(intf, chan, IPMI_LANP_IP_ADDR, data, 4); ++ } + } + /* network mask */ +- else if ((strncmp(argv[1], "netmask", 7) == 0) && +- (get_cmdline_ipaddr(argv[2], data) == 0)) { +- printf("Setting LAN %s to %d.%d.%d.%d\n", +- ipmi_lan_params[IPMI_LANP_SUBNET_MASK].desc, +- data[0], data[1], data[2], data[3]); +- rc = set_lan_param(intf, chan, IPMI_LANP_SUBNET_MASK, data, 4); ++ else if (strncmp(argv[1], "netmask", 7) == 0) { ++ if ( argc < 3 || strncmp(argv[2], "help", 4) == 0 || ++ get_cmdline_ipaddr(argv[2], data) != 0 ) { ++ lprintf(LOG_NOTICE, "lan set netmask "); ++ } ++ else { ++ printf("Setting LAN %s to %d.%d.%d.%d\n", ++ ipmi_lan_params[IPMI_LANP_SUBNET_MASK].desc, ++ data[0], data[1], data[2], data[3]); ++ rc = set_lan_param(intf, chan, IPMI_LANP_SUBNET_MASK, data, 4); ++ } + } + /* mac address */ +- else if ((strncmp(argv[1], "macaddr", 7) == 0) && +- (get_cmdline_macaddr(argv[2], data) == 0)) { +- printf("Setting LAN %s to %02x:%02x:%02x:%02x:%02x:%02x\n", +- ipmi_lan_params[IPMI_LANP_MAC_ADDR].desc, +- data[0], data[1], data[2], data[3], data[4], data[5]); +- rc = set_lan_param(intf, chan, IPMI_LANP_MAC_ADDR, data, 6); ++ else if (strncmp(argv[1], "macaddr", 7) == 0) { ++ if ( argc < 3 || strncmp(argv[2], "help", 4) == 0 || ++ get_cmdline_macaddr(argv[2], data) != 0 ) { ++ lprintf(LOG_NOTICE, "lan set macaddr "); ++ } ++ else { ++ printf("Setting LAN %s to %02x:%02x:%02x:%02x:%02x:%02x\n", ++ ipmi_lan_params[IPMI_LANP_MAC_ADDR].desc, ++ data[0], data[1], data[2], data[3], data[4], data[5]); ++ rc = set_lan_param(intf, chan, IPMI_LANP_MAC_ADDR, data, 6); ++ } + } + /* default gateway settings */ + else if (strncmp(argv[1], "defgw", 5) == 0) { diff --git a/debian/patches/20-linux-libc-dev.dpatch b/debian/patches/20-linux-libc-dev.dpatch deleted file mode 100644 index 8aecb3c..0000000 --- a/debian/patches/20-linux-libc-dev.dpatch +++ /dev/null @@ -1,29 +0,0 @@ -#! /bin/sh /usr/share/dpatch/dpatch-run -## 20-linux-libc-dev.dpatch by -## -## All lines beginning with `## DP:' are a description of the patch. -## DP: No description. - -@DPATCH@ -diff -urNad ipmitool-1.8.8~/src/ipmievd.c ipmitool-1.8.8/src/ipmievd.c ---- ipmitool-1.8.8~/src/ipmievd.c 2007-07-20 16:01:43.000000000 +0200 -+++ ipmitool-1.8.8/src/ipmievd.c 2007-07-20 16:02:14.000000000 +0200 -@@ -54,7 +54,6 @@ - - #ifdef IPMI_INTF_OPEN - # if defined(HAVE_OPENIPMI_H) --# include - # include - # elif defined(HAVE_FREEBSD_IPMI_H) - # include -diff -urNad ipmitool-1.8.8~/src/plugins/open/open.c ipmitool-1.8.8/src/plugins/open/open.c ---- ipmitool-1.8.8~/src/plugins/open/open.c 2007-07-20 16:01:21.000000000 +0200 -+++ ipmitool-1.8.8/src/plugins/open/open.c 2007-07-20 16:01:43.000000000 +0200 -@@ -50,7 +50,6 @@ - #endif - - #if defined(HAVE_OPENIPMI_H) --# include - # include - #elif defined(HAVE_FREEBSD_IPMI_H) - /* FreeBSD OpenIPMI-compatible header */ diff --git a/debian/patches/20_ipmi_impi.dpatch b/debian/patches/20_ipmi_impi.dpatch new file mode 100644 index 0000000..d966a1d --- /dev/null +++ b/debian/patches/20_ipmi_impi.dpatch @@ -0,0 +1,340 @@ +#! /bin/sh /usr/share/dpatch/dpatch-run +## 20ipmi_impi.dpatch by +## +## All lines beginning with `## DP:' are a description of the patch. +## DP: 20ipmi_impi, closes #412816 + +@DPATCH@ + +--- ipmitool-1.8.9-rc1/lib/ipmi_strings.c.orig 2005-05-15 06:26:33.000000000 +0200 ++++ ipmitool-1.8.9-rc1/lib/ipmi_strings.c 2005-10-23 15:22:57.000000000 +0200 +@@ -43,7 +43,7 @@ + /* + * From table 26-4 of the IPMI v2 specification + */ +-const struct valstr impi_bit_rate_vals[] = { ++const struct valstr ipmi_bit_rate_vals[] = { + { 0x00, "IPMI-Over-Serial-Setting"}, /* Using the value in the IPMI Over Serial Config */ + { 0x06, "9.6" }, + { 0x07, "19.2" }, +--- ipmitool-1.8.9-rc1/lib/ipmi_sol.c.orig 2006-08-02 19:17:10.000000000 +0200 ++++ ipmitool-1.8.9-rc1/lib/ipmi_sol.c 2006-08-25 16:01:54.000000000 +0200 +@@ -108,7 +108,7 @@ + + memset(&req, 0, sizeof(req)); + req.msg.netfn = IPMI_NETFN_TRANSPORT; +- req.msg.cmd = IMPI_GET_SOL_CONFIG_PARAMETERS; ++ req.msg.cmd = IPMI_GET_SOL_CONFIG_PARAMETERS; + req.msg.data_len = 4; + req.msg.data = data; + +@@ -485,10 +485,10 @@ + printf("%d,", params.retry_interval * 10); + + printf("%s,", +- val2str(params.volatile_bit_rate, impi_bit_rate_vals)); ++ val2str(params.volatile_bit_rate, ipmi_bit_rate_vals)); + + printf("%s,", +- val2str(params.non_volatile_bit_rate, impi_bit_rate_vals)); ++ val2str(params.non_volatile_bit_rate, ipmi_bit_rate_vals)); + + printf("%d,", params.payload_channel); + printf("%d\n", params.payload_port); +@@ -516,10 +516,10 @@ + params.retry_interval * 10); + + printf("Volatile Bit Rate (kbps) : %s\n", +- val2str(params.volatile_bit_rate, impi_bit_rate_vals)); ++ val2str(params.volatile_bit_rate, ipmi_bit_rate_vals)); + + printf("Non-Volatile Bit Rate (kbps) : %s\n", +- val2str(params.non_volatile_bit_rate, impi_bit_rate_vals)); ++ val2str(params.non_volatile_bit_rate, ipmi_bit_rate_vals)); + + printf("Payload Channel : %d (0x%02x)\n", + params.payload_channel, params.payload_channel); +@@ -554,7 +554,7 @@ + + memset(&req, 0, sizeof(req)); + req.msg.netfn = IPMI_NETFN_TRANSPORT; /* 0x0c */ +- req.msg.cmd = IMPI_SET_SOL_CONFIG_PARAMETERS; /* 0x21 */ ++ req.msg.cmd = IPMI_SET_SOL_CONFIG_PARAMETERS; /* 0x21 */ + req.msg.data = data; + + data[0] = channel; +@@ -1105,7 +1105,7 @@ + + + /* +- * impi_sol_deactivate ++ * ipmi_sol_deactivate + */ + static int + ipmi_sol_deactivate(struct ipmi_intf * intf) +@@ -1451,7 +1451,7 @@ + + + /* +- * impi_sol_activate ++ * ipmi_sol_activate + */ + static int + ipmi_sol_activate(struct ipmi_intf * intf, int looptest, int interval) +--- ipmitool-1.8.9-rc1/include/ipmitool/ipmi_intf.h.orig 2005-04-21 01:03:57.000000000 +0200 ++++ ipmitool-1.8.9-rc1/include/ipmitool/ipmi_intf.h 2005-10-23 16:07:56.000000000 +0200 +@@ -96,7 +96,7 @@ + socklen_t addrlen; + + /* +- * This struct holds state data specific to IMPI v2 / RMCP+ sessions ++ * This struct holds state data specific to IPMI v2 / RMCP+ sessions + */ + struct { + enum LANPLUS_SESSION_STATE session_state; +--- ipmitool-1.8.9-rc1/include/ipmitool/ipmi_user.h.orig 2005-01-07 03:05:45.000000000 +0100 ++++ ipmitool-1.8.9-rc1/include/ipmitool/ipmi_user.h 2005-10-23 16:08:25.000000000 +0200 +@@ -44,7 +44,7 @@ + + + /* +- * The GET USER ACCESS response from table 22-32 of the IMPI v2.0 spec ++ * The GET USER ACCESS response from table 22-32 of the IPMI v2.0 spec + */ + struct user_access_rsp { + #if WORDS_BIGENDIAN +--- ipmitool-1.8.9-rc1/include/ipmitool/ipmi_strings.h.orig 2005-05-11 07:46:40.000000000 +0200 ++++ ipmitool-1.8.9-rc1/include/ipmitool/ipmi_strings.h 2005-10-23 15:22:19.000000000 +0200 +@@ -45,7 +45,7 @@ + + extern const struct valstr ipmi_channel_activity_type_vals[]; + extern const struct valstr ipmi_privlvl_vals[]; +-extern const struct valstr impi_bit_rate_vals[]; ++extern const struct valstr ipmi_bit_rate_vals[]; + extern const struct valstr ipmi_set_in_progress_vals[]; + extern const struct valstr ipmi_authtype_session_vals[]; + extern const struct valstr ipmi_authtype_vals[]; +--- ipmitool-1.8.9-rc1/include/ipmitool/ipmi_constants.h.orig 2005-05-11 07:46:40.000000000 +0200 ++++ ipmitool-1.8.9-rc1/include/ipmitool/ipmi_constants.h 2005-10-23 16:08:13.000000000 +0200 +@@ -42,9 +42,9 @@ + * COMMANDS + */ + #define IPMI_GET_SDR_REPOSITORY_INFO 0x20 +-#define IMPI_SOL_ACTIVATING 0x20 +-#define IMPI_SET_SOL_CONFIG_PARAMETERS 0x21 +-#define IMPI_GET_SOL_CONFIG_PARAMETERS 0x22 ++#define IPMI_SOL_ACTIVATING 0x20 ++#define IPMI_SET_SOL_CONFIG_PARAMETERS 0x21 ++#define IPMI_GET_SOL_CONFIG_PARAMETERS 0x22 + #define IPMI_SET_USER_ACCESS 0x43 + #define IPMI_GET_USER_ACCESS 0x44 + #define IPMI_SET_USER_NAME 0x45 +--- ipmitool-1.8.9-rc1/src/plugins/lanplus/lanplus.c.orig 2006-08-03 18:26:06.000000000 +0200 ++++ ipmitool-1.8.9-rc1/src/plugins/lanplus/lanplus.c 2006-08-25 16:06:37.000000000 +0200 +@@ -862,7 +862,7 @@ + /* + * read_open_session_reponse + * +- * Initialize the ipmi_rs from the IMPI 2.x open session response data. ++ * Initialize the ipmi_rs from the IPMI 2.x open session response data. + * + * The offset should point to the first byte of the the Open Session Response + * payload when this function is called. +@@ -924,7 +924,7 @@ + /* + * read_rakp2_message + * +- * Initialize the ipmi_rs from the IMPI 2.x RAKP 2 message ++ * Initialize the ipmi_rs from the IPMI 2.x RAKP 2 message + * + * The offset should point the first byte of the the RAKP 2 payload when this + * function is called. +@@ -1004,7 +1004,7 @@ + /* + * read_rakp4_message + * +- * Initialize the ipmi_rs from the IMPI 2.x RAKP 4 message ++ * Initialize the ipmi_rs from the IPMI 2.x RAKP 4 message + * + * The offset should point the first byte of the the RAKP 4 payload when this + * function is called. +@@ -1212,7 +1212,7 @@ + /* + * read_ipmi_response + * +- * Initialize the impi_rs from with the IPMI response specific data ++ * Initialize the ipmi_rs from with the IPMI response specific data + * + * The offset should point the first byte of the the IPMI payload when this + * function is called. +@@ -1244,7 +1244,7 @@ + /* + * read_sol_packet + * +- * Initialize the impi_rs with the SOL response data ++ * Initialize the ipmi_rs with the SOL response data + * + * The offset should point the first byte of the the SOL payload when this + * function is called. +@@ -1562,32 +1562,32 @@ + *------------------------------------------ + */ + /* ipmi session Auth Type / Format is always 0x06 for IPMI v2 */ +- msg[IMPI_LANPLUS_OFFSET_AUTHTYPE] = 0x06; ++ msg[IPMI_LANPLUS_OFFSET_AUTHTYPE] = 0x06; + + /* Payload Type -- also specifies whether were authenticated/encyrpted */ +- msg[IMPI_LANPLUS_OFFSET_PAYLOAD_TYPE] = payload->payload_type; ++ msg[IPMI_LANPLUS_OFFSET_PAYLOAD_TYPE] = payload->payload_type; + + if (session->v2_data.session_state == LANPLUS_STATE_ACTIVE) + { +- msg[IMPI_LANPLUS_OFFSET_PAYLOAD_TYPE] |= ++ msg[IPMI_LANPLUS_OFFSET_PAYLOAD_TYPE] |= + ((session->v2_data.crypt_alg != IPMI_CRYPT_NONE )? 0x80 : 0x00); +- msg[IMPI_LANPLUS_OFFSET_PAYLOAD_TYPE] |= ++ msg[IPMI_LANPLUS_OFFSET_PAYLOAD_TYPE] |= + ((session->v2_data.integrity_alg != IPMI_INTEGRITY_NONE)? 0x40 : 0x00); + } + + if (session->v2_data.session_state == LANPLUS_STATE_ACTIVE) + { + /* Session ID -- making it LSB */ +- msg[IMPI_LANPLUS_OFFSET_SESSION_ID ] = session->v2_data.bmc_id & 0xff; +- msg[IMPI_LANPLUS_OFFSET_SESSION_ID + 1] = (session->v2_data.bmc_id >> 8) & 0xff; +- msg[IMPI_LANPLUS_OFFSET_SESSION_ID + 2] = (session->v2_data.bmc_id >> 16) & 0xff; +- msg[IMPI_LANPLUS_OFFSET_SESSION_ID + 3] = (session->v2_data.bmc_id >> 24) & 0xff; ++ msg[IPMI_LANPLUS_OFFSET_SESSION_ID ] = session->v2_data.bmc_id & 0xff; ++ msg[IPMI_LANPLUS_OFFSET_SESSION_ID + 1] = (session->v2_data.bmc_id >> 8) & 0xff; ++ msg[IPMI_LANPLUS_OFFSET_SESSION_ID + 2] = (session->v2_data.bmc_id >> 16) & 0xff; ++ msg[IPMI_LANPLUS_OFFSET_SESSION_ID + 3] = (session->v2_data.bmc_id >> 24) & 0xff; + + /* Sequence Number -- making it LSB */ +- msg[IMPI_LANPLUS_OFFSET_SEQUENCE_NUM ] = session->out_seq & 0xff; +- msg[IMPI_LANPLUS_OFFSET_SEQUENCE_NUM + 1] = (session->out_seq >> 8) & 0xff; +- msg[IMPI_LANPLUS_OFFSET_SEQUENCE_NUM + 2] = (session->out_seq >> 16) & 0xff; +- msg[IMPI_LANPLUS_OFFSET_SEQUENCE_NUM + 3] = (session->out_seq >> 24) & 0xff; ++ msg[IPMI_LANPLUS_OFFSET_SEQUENCE_NUM ] = session->out_seq & 0xff; ++ msg[IPMI_LANPLUS_OFFSET_SEQUENCE_NUM + 1] = (session->out_seq >> 8) & 0xff; ++ msg[IPMI_LANPLUS_OFFSET_SEQUENCE_NUM + 2] = (session->out_seq >> 16) & 0xff; ++ msg[IPMI_LANPLUS_OFFSET_SEQUENCE_NUM + 3] = (session->out_seq >> 24) & 0xff; + } + + /* +@@ -1679,9 +1679,9 @@ + } + + /* Now we know the payload length */ +- msg[IMPI_LANPLUS_OFFSET_PAYLOAD_SIZE ] = ++ msg[IPMI_LANPLUS_OFFSET_PAYLOAD_SIZE ] = + payload->payload_length & 0xff; +- msg[IMPI_LANPLUS_OFFSET_PAYLOAD_SIZE + 1] = ++ msg[IPMI_LANPLUS_OFFSET_PAYLOAD_SIZE + 1] = + (payload->payload_length >> 8) & 0xff; + + +@@ -1745,14 +1745,14 @@ + 2; + + if (verbose > 2) +- printbuf(msg + IMPI_LANPLUS_OFFSET_AUTHTYPE, hmac_input_size, "authcode input"); ++ printbuf(msg + IPMI_LANPLUS_OFFSET_AUTHTYPE, hmac_input_size, "authcode input"); + + + /* Auth Code */ + lanplus_HMAC(session->v2_data.integrity_alg, + session->v2_data.k1, /* key */ + 20, /* key length */ +- msg + IMPI_LANPLUS_OFFSET_AUTHTYPE, /* hmac input */ ++ msg + IPMI_LANPLUS_OFFSET_AUTHTYPE, /* hmac input */ + hmac_input_size, + hmac_output, + &hmac_length); +@@ -2529,7 +2529,7 @@ + * ipmi_get_auth_capabilities_cmd + * + * This command may have to be sent twice. We first ask for the +- * authentication capabilities with the "request IMPI v2 data bit" ++ * authentication capabilities with the "request IPMI v2 data bit" + * set. If this fails, we send the same command without that bit + * set. + * +@@ -2602,7 +2602,7 @@ + + + static int +-impi_close_session_cmd(struct ipmi_intf * intf) ++ipmi_close_session_cmd(struct ipmi_intf * intf) + { + struct ipmi_rs * rsp; + struct ipmi_rq req; +@@ -2836,7 +2836,7 @@ + /* + * ipmi_lanplus_rakp1 + * +- * Build and send the RAKP 1 message as part of the IMPI v2 / RMCP+ session ++ * Build and send the RAKP 1 message as part of the IPMI v2 / RMCP+ session + * negotiation protocol. We also read and validate the RAKP 2 message received + * from the BMC, here. See section 13.20 of the IPMI v2 specification for + * details. +@@ -2990,7 +2990,7 @@ + /* + * ipmi_lanplus_rakp3 + * +- * Build and send the RAKP 3 message as part of the IMPI v2 / RMCP+ session ++ * Build and send the RAKP 3 message as part of the IPMI v2 / RMCP+ session + * negotiation protocol. We also read and validate the RAKP 4 message received + * from the BMC, here. See section 13.20 of the IPMI v2 specification for + * details. +@@ -3154,7 +3154,7 @@ + ipmi_lanplus_close(struct ipmi_intf * intf) + { + if (!intf->abort) +- impi_close_session_cmd(intf); ++ ipmi_close_session_cmd(intf); + + if (intf->fd >= 0) + close(intf->fd); +--- ipmitool-1.8.9-rc1/src/plugins/lanplus/lanplus.h.orig 2005-03-17 00:17:37.000000000 +0100 ++++ ipmitool-1.8.9-rc1/src/plugins/lanplus/lanplus.h 2005-10-23 16:09:48.000000000 +0200 +@@ -84,11 +84,11 @@ + + + /* Session message offsets, from table 13-8 of the v2 specification */ +-#define IMPI_LANPLUS_OFFSET_AUTHTYPE 0x04 +-#define IMPI_LANPLUS_OFFSET_PAYLOAD_TYPE 0x05 +-#define IMPI_LANPLUS_OFFSET_SESSION_ID 0x06 +-#define IMPI_LANPLUS_OFFSET_SEQUENCE_NUM 0x0A +-#define IMPI_LANPLUS_OFFSET_PAYLOAD_SIZE 0x0E ++#define IPMI_LANPLUS_OFFSET_AUTHTYPE 0x04 ++#define IPMI_LANPLUS_OFFSET_PAYLOAD_TYPE 0x05 ++#define IPMI_LANPLUS_OFFSET_SESSION_ID 0x06 ++#define IPMI_LANPLUS_OFFSET_SEQUENCE_NUM 0x0A ++#define IPMI_LANPLUS_OFFSET_PAYLOAD_SIZE 0x0E + #define IPMI_LANPLUS_OFFSET_PAYLOAD 0x10 + + +--- ipmitool-1.8.9-rc1/src/plugins/lanplus/lanplus_crypt.c.orig 2005-03-24 02:46:03.000000000 +0100 ++++ ipmitool-1.8.9-rc1/src/plugins/lanplus/lanplus_crypt.c 2005-10-23 16:10:06.000000000 +0200 +@@ -800,8 +800,8 @@ + lanplus_HMAC(session->v2_data.integrity_alg, + session->v2_data.k1, + IPMI_AUTHCODE_BUFFER_SIZE, +- rs->data + IMPI_LANPLUS_OFFSET_AUTHTYPE, +- rs->data_len - IMPI_LANPLUS_OFFSET_AUTHTYPE - IPMI_SHA1_AUTHCODE_SIZE, ++ rs->data + IPMI_LANPLUS_OFFSET_AUTHTYPE, ++ rs->data_len - IPMI_LANPLUS_OFFSET_AUTHTYPE - IPMI_SHA1_AUTHCODE_SIZE, + generated_authcode, + &generated_authcode_length); + +@@ -809,8 +809,8 @@ + { + lprintf(LOG_DEBUG+2, "Validating authcode"); + printbuf(session->v2_data.k1, 20, "K1"); +- printbuf(rs->data + IMPI_LANPLUS_OFFSET_AUTHTYPE, +- rs->data_len - IMPI_LANPLUS_OFFSET_AUTHTYPE - IPMI_SHA1_AUTHCODE_SIZE, ++ printbuf(rs->data + IPMI_LANPLUS_OFFSET_AUTHTYPE, ++ rs->data_len - IPMI_LANPLUS_OFFSET_AUTHTYPE - IPMI_SHA1_AUTHCODE_SIZE, + "Authcode Input Data"); + printbuf(generated_authcode, 12, "Generated authcode"); + printbuf(bmc_authcode, 12, "Expected authcode"); diff --git a/debian/patches/20_ipmi_isol.dpatch b/debian/patches/20_ipmi_isol.dpatch new file mode 100644 index 0000000..382e62a --- /dev/null +++ b/debian/patches/20_ipmi_isol.dpatch @@ -0,0 +1,1857 @@ +#! /bin/sh /usr/share/dpatch/dpatch-run +## 20_ipmi_isol.dpatch by +## +## All lines beginning with `## DP:' are a description of the patch. +## DP: 20_ipmi_isol, closes #412816 + +@DPATCH@ + +diff -urN ipmitool-1.8.9.orig/include/ipmitool/ipmi_isol.h ipmitool-1.8.9/include/ipmitool/ipmi_isol.h +--- ipmitool-1.8.9.orig/include/ipmitool/ipmi_isol.h 2007-02-22 08:38:55.000000000 +0000 ++++ ipmitool-1.8.9/include/ipmitool/ipmi_isol.h 2007-12-13 10:16:57.063986495 +0000 +@@ -41,15 +41,16 @@ + + #define ISOL_ENABLE_PARAM 0x01 + #define ISOL_AUTHENTICATION_PARAM 0x02 +-#define ISOL_ENABLE_FLAG 0x01 +-#define ISOL_PRIVILEGE_LEVEL_USER 0x02 ++ + #define ISOL_BAUD_RATE_PARAM 0x05 +-#define ISOL_BAUD_RATE_9600 0x06 +-#define ISOL_BAUD_RATE_19200 0x07 +-#define ISOL_BAUD_RATE_38400 0x08 +-#define ISOL_BAUD_RATE_57600 0x09 +-#define ISOL_BAUD_RATE_115200 0x0A +-#define ISOL_PREFERRED_BAUD_RATE 0x07 ++ ++#define ISOL_PREFERRED_BAUD_RATE 0x07 ++ ++struct isol_config_parameters { ++ uint8_t enabled; ++ uint8_t privilege_level; ++ uint8_t bit_rate; ++}; + + int ipmi_isol_main(struct ipmi_intf *, int, char **); + +diff -urN ipmitool-1.8.9.orig/include/ipmitool/ipmi_isol.h.orig ipmitool-1.8.9/include/ipmitool/ipmi_isol.h.orig +--- ipmitool-1.8.9.orig/include/ipmitool/ipmi_isol.h.orig 1970-01-01 01:00:00.000000000 +0100 ++++ ipmitool-1.8.9/include/ipmitool/ipmi_isol.h.orig 2007-02-22 08:38:55.000000000 +0000 +@@ -0,0 +1,56 @@ ++/* ++ * Copyright (c) 2003 Sun Microsystems, Inc. All Rights Reserved. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions ++ * are met: ++ * ++ * Redistribution of source code must retain the above copyright ++ * notice, this list of conditions and the following disclaimer. ++ * ++ * Redistribution in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * ++ * Neither the name of Sun Microsystems, Inc. or the names of ++ * contributors may be used to endorse or promote products derived ++ * from this software without specific prior written permission. ++ * ++ * This software is provided "AS IS," without a warranty of any kind. ++ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, ++ * INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A ++ * PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY EXCLUDED. ++ * SUN MICROSYSTEMS, INC. ("SUN") AND ITS LICENSORS SHALL NOT BE LIABLE ++ * FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING ++ * OR DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES. IN NO EVENT WILL ++ * SUN OR ITS LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA, ++ * OR FOR DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR ++ * PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF ++ * LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE, ++ * EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. ++ */ ++ ++#ifndef IPMI_ISOL_H ++#define IPMI_ISOL_H ++ ++#include ++ ++#define ACTIVATE_ISOL 0x01 ++#define SET_ISOL_CONFIG 0x03 ++#define GET_ISOL_CONFIG 0x04 ++ ++#define ISOL_ENABLE_PARAM 0x01 ++#define ISOL_AUTHENTICATION_PARAM 0x02 ++#define ISOL_ENABLE_FLAG 0x01 ++#define ISOL_PRIVILEGE_LEVEL_USER 0x02 ++#define ISOL_BAUD_RATE_PARAM 0x05 ++#define ISOL_BAUD_RATE_9600 0x06 ++#define ISOL_BAUD_RATE_19200 0x07 ++#define ISOL_BAUD_RATE_38400 0x08 ++#define ISOL_BAUD_RATE_57600 0x09 ++#define ISOL_BAUD_RATE_115200 0x0A ++#define ISOL_PREFERRED_BAUD_RATE 0x07 ++ ++int ipmi_isol_main(struct ipmi_intf *, int, char **); ++ ++#endif /* IPMI_SOL_H */ +diff -urN ipmitool-1.8.9.orig/lib/ipmi_isol.c ipmitool-1.8.9/lib/ipmi_isol.c +--- ipmitool-1.8.9.orig/lib/ipmi_isol.c 2007-02-22 08:38:56.000000000 +0000 ++++ ipmitool-1.8.9/lib/ipmi_isol.c 2007-12-13 10:16:57.063986495 +0000 +@@ -32,7 +32,17 @@ + + #include + #include ++#include + #include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++ ++#include + + #include + #include +@@ -41,39 +51,40 @@ + #include + #include + +-const struct valstr ipmi_isol_baud_vals[] = { +- { ISOL_BAUD_RATE_9600, "9600" }, +- { ISOL_BAUD_RATE_19200, "19200" }, +- { ISOL_BAUD_RATE_38400, "38400" }, +- { ISOL_BAUD_RATE_57600, "57600" }, +- { ISOL_BAUD_RATE_115200, "115200" }, +- { 0x00, NULL } +-}; ++static struct termios _saved_tio; ++static int _in_raw_mode = 0; + + extern int verbose; + +-static int ipmi_isol_setup(struct ipmi_intf * intf, char baudsetting) ++#define ISOL_ESCAPE_CHARACTER '~' ++ ++/* ++ * ipmi_get_isol_info ++ */ ++static int ipmi_get_isol_info(struct ipmi_intf * intf, ++ struct isol_config_parameters * params) + { + struct ipmi_rs * rsp; + struct ipmi_rq req; +- unsigned char data[6]; ++ unsigned char data[6]; + +- /* TEST FOR AVAILABILITY */ ++ memset(&req, 0, sizeof(req)); ++ req.msg.netfn = IPMI_NETFN_ISOL; ++ req.msg.cmd = GET_ISOL_CONFIG; ++ req.msg.data = data; ++ req.msg.data_len = 4; + ++ /* GET ISOL ENABLED CONFIG */ ++ + memset(data, 0, 6); + data[0] = 0x00; + data[1] = ISOL_ENABLE_PARAM; +- data[2] = ISOL_ENABLE_FLAG; +- +- memset(&req, 0, sizeof(req)); +- req.msg.netfn = IPMI_NETFN_ISOL; +- req.msg.cmd = SET_ISOL_CONFIG; +- req.msg.data = data; +- req.msg.data_len = 3; ++ data[2] = 0x00; /* block */ ++ data[3] = 0x00; /* selector */ + + rsp = intf->sendrecv(intf, &req); + if (rsp == NULL) { +- lprintf(LOG_ERR, "Error in Set ISOL Config Command"); ++ lprintf(LOG_ERR, "Error in Get ISOL Config Command"); + return -1; + } + if (rsp->ccode == 0xc1) { +@@ -81,20 +92,19 @@ + return -1; + } + if (rsp->ccode > 0) { +- lprintf(LOG_ERR, "Error in Set ISOL Config Command: %s", ++ lprintf(LOG_ERR, "Error in Get ISOL Config Command: %s", + val2str(rsp->ccode, completion_code_vals)); + return -1; + } ++ params->enabled = rsp->data[1]; + +- /* GET ISOL CONFIG */ +- ++ /* GET ISOL AUTHENTICATON CONFIG */ ++ + memset(data, 0, 6); + data[0] = 0x00; + data[1] = ISOL_AUTHENTICATION_PARAM; + data[2] = 0x00; /* block */ + data[3] = 0x00; /* selector */ +- req.msg.cmd = GET_ISOL_CONFIG; +- req.msg.data_len = 4; + + rsp = intf->sendrecv(intf, &req); + if (rsp == NULL) { +@@ -106,86 +116,713 @@ + val2str(rsp->ccode, completion_code_vals)); + return -1; + } +- +- if (verbose > 1) +- printbuf(rsp->data, rsp->data_len, "ISOL Config"); +- +- /* SET ISOL CONFIG - AUTHENTICATION */ +- ++ params->privilege_level = rsp->data[1]; ++ ++ /* GET ISOL BAUD RATE CONFIG */ ++ + memset(data, 0, 6); + data[0] = 0x00; +- data[1] = ISOL_AUTHENTICATION_PARAM; +- data[2] = ISOL_PRIVILEGE_LEVEL_USER | (rsp->data[1] & 0x80); +- req.msg.cmd = SET_ISOL_CONFIG; +- req.msg.data_len = 3; ++ data[1] = ISOL_BAUD_RATE_PARAM; ++ data[2] = 0x00; /* block */ ++ data[3] = 0x00; /* selector */ + + rsp = intf->sendrecv(intf, &req); + if (rsp == NULL) { +- lprintf(LOG_ERR, "Error in Set ISOL Config (Authentication) Command"); ++ lprintf(LOG_ERR, "Error in Get ISOL Config Command"); + return -1; + } + if (rsp->ccode > 0) { +- lprintf(LOG_ERR, "Error in Set ISOL Config (Authentication) Command: %s", ++ lprintf(LOG_ERR, "Error in Get ISOL Config Command: %s", + val2str(rsp->ccode, completion_code_vals)); + return -1; + } ++ params->bit_rate = rsp->data[1]; + +- /* SET ISOL CONFIG - BAUD RATE */ ++ return 0; ++} + +- memset(data, 0, 6); +- data[0] = 0x00; +- data[1] = ISOL_BAUD_RATE_PARAM; +- data[2] = baudsetting; ++static int ipmi_print_isol_info(struct ipmi_intf * intf) ++{ ++ struct isol_config_parameters params = {0}; ++ if (ipmi_get_isol_info(intf, ¶ms)) ++ return -1; ++ ++ if (csv_output) ++ { ++ printf("%s,", (params.enabled & 0x1)?"true": "false"); ++ printf("%s,", ++ val2str((params.privilege_level & 0xf), ipmi_privlvl_vals)); ++ printf("%s,", ++ val2str((params.bit_rate & 0xf), ipmi_bit_rate_vals)); ++ } ++ else ++ { ++ printf("Enabled : %s\n", ++ (params.enabled & 0x1)?"true": "false"); ++ printf("Privilege Level : %s\n", ++ val2str((params.privilege_level & 0xf), ipmi_privlvl_vals)); ++ printf("Bit Rate (kbps) : %s\n", ++ val2str((params.bit_rate & 0xf), ipmi_bit_rate_vals)); ++ } ++ ++ return 0; ++} ++ ++static int ipmi_isol_set_param(struct ipmi_intf * intf, ++ const char *param, ++ const char *value) ++{ ++ struct ipmi_rs * rsp; ++ struct ipmi_rq req; ++ unsigned char data[6]; ++ struct isol_config_parameters params = {0}; ++ ++ /* We need other values to complete the request */ ++ if (ipmi_get_isol_info(intf, ¶ms)) ++ return -1; ++ ++ memset(&req, 0, sizeof(req)); ++ req.msg.netfn = IPMI_NETFN_ISOL; + req.msg.cmd = SET_ISOL_CONFIG; ++ req.msg.data = data; + req.msg.data_len = 3; + ++ memset(data, 0, 6); ++ ++ /* ++ * enabled ++ */ ++ if (strcmp(param, "enabled") == 0) ++ { ++ data[1] = ISOL_ENABLE_PARAM; ++ if (strcmp(value, "true") == 0) ++ data[2] = 0x01; ++ else if (strcmp(value, "false") == 0) ++ data[2] = 0x00; ++ else { ++ lprintf(LOG_ERR, "Invalid value %s for parameter %s", ++ value, param); ++ lprintf(LOG_ERR, "Valid values are true and false"); ++ return -1; ++ } ++ } ++ ++ /* ++ * privilege-level ++ */ ++ else if (strcmp(param, "privilege-level") == 0) ++ { ++ data[1] = ISOL_AUTHENTICATION_PARAM; ++ if (! strcmp(value, "user")) ++ data[2] = 0x02; ++ else if (! strcmp(value, "operator")) ++ data[2] = 0x03; ++ else if (! strcmp(value, "admin")) ++ data[2] = 0x04; ++ else if (! strcmp(value, "oem")) ++ data[2] = 0x05; ++ else ++ { ++ lprintf(LOG_ERR, "Invalid value %s for parameter %s", ++ value, param); ++ lprintf(LOG_ERR, "Valid values are user, operator, admin, and oem"); ++ return -1; ++ } ++ /* We need to mask bit7 from the fetched value */ ++ data[2] |= (params.privilege_level & 0x80) ? 0x80 : 0x00; ++ } ++ ++ /* ++ * bit-rate ++ */ ++ else if (strcmp(param, "bit-rate") == 0) ++ { ++ data[1] = ISOL_BAUD_RATE_PARAM; ++ if (strncmp(value, "9.6", 3) == 0) { ++ data[2] = 0x06; ++ } ++ else if (strncmp(value, "19.2", 4) == 0) { ++ data[2] = 0x07; ++ } ++ else if (strncmp(value, "38.4", 4) == 0) { ++ data[2] = 0x08; ++ } ++ else if (strncmp(value, "57.6", 4) == 0) { ++ data[2] = 0x09; ++ } ++ else if (strncmp(value, "115.2", 5) == 0) { ++ data[2] = 0x0A; ++ } ++ else { ++ lprintf(LOG_ERR, "ISOL - Unsupported baud rate: %s", value); ++ lprintf(LOG_ERR, "Valid values are 9.6, 19.2, 38.4, 57.6 and 115.2"); ++ return -1; ++ } ++ } ++ else ++ { ++ lprintf(LOG_ERR, "Error: invalid ISOL parameter %s", param); ++ return -1; ++ } ++ ++ ++ /* ++ * Execute the request ++ */ ++ + rsp = intf->sendrecv(intf, &req); + if (rsp == NULL) { +- lprintf(LOG_ERR, "Error in Set ISOL Config (Baud Rate) Command"); ++ lprintf(LOG_ERR, "Error setting ISOL parameter '%s'", param); + return -1; + } + if (rsp->ccode > 0) { +- lprintf(LOG_ERR, "Error in Set ISOL Config (Baud Rate) Command: %s", +- val2str(rsp->ccode, completion_code_vals)); ++ lprintf(LOG_ERR, "Error setting ISOL parameter '%s': %s", ++ param, val2str(rsp->ccode, completion_code_vals)); + return -1; + } + +- printf("Set ISOL Baud Rate to %s\n", +- val2str(baudsetting, ipmi_isol_baud_vals)); ++ return 0; ++} ++ ++static void ++leave_raw_mode(void) ++{ ++ if (!_in_raw_mode) ++ return; ++ if (tcsetattr(fileno(stdin), TCSADRAIN, &_saved_tio) == -1) ++ perror("tcsetattr"); ++ else ++ _in_raw_mode = 0; ++} ++ ++ ++ ++static void ++enter_raw_mode(void) ++{ ++ struct termios tio; ++ if (tcgetattr(fileno(stdin), &tio) == -1) { ++ perror("tcgetattr"); ++ return; ++ } ++ _saved_tio = tio; ++ tio.c_iflag |= IGNPAR; ++ tio.c_iflag &= ~(ISTRIP | INLCR | IGNCR | ICRNL | IXON | IXANY | IXOFF)\ ++ ; ++ tio.c_lflag &= ~(ISIG | ICANON | ECHO | ECHOE | ECHOK | ECHONL); ++ // #ifdef IEXTEN ++ tio.c_lflag &= ~IEXTEN; ++ // #endif ++ tio.c_oflag &= ~OPOST; ++ tio.c_cc[VMIN] = 1; ++ tio.c_cc[VTIME] = 0; ++ if (tcsetattr(fileno(stdin), TCSADRAIN, &tio) == -1) ++ perror("tcsetattr"); ++ else ++ _in_raw_mode = 1; ++} ++ ++ ++static void ++sendBreak(struct ipmi_intf * intf) ++{ ++ struct ipmi_v2_payload v2_payload; ++ ++ memset(&v2_payload, 0, sizeof(v2_payload)); ++ ++ v2_payload.payload.sol_packet.character_count = 0; ++ v2_payload.payload.sol_packet.generate_break = 1; ++ ++ intf->send_sol(intf, &v2_payload); ++} ++ ++/* ++ * suspendSelf ++ * ++ * Put ourself in the background ++ * ++ * param bRestoreTty specifies whether we will put our self back ++ * in raw mode when we resume ++ */ ++static void ++suspendSelf(int bRestoreTty) ++{ ++ leave_raw_mode(); ++ kill(getpid(), SIGTSTP); ++ ++ if (bRestoreTty) ++ enter_raw_mode(); ++} ++ ++ ++ ++/* ++ * printiSolEscapeSequences ++ * ++ * Send some useful documentation to the user ++ */ ++static void ++printiSolEscapeSequences(void) ++{ ++ printf( ++ "%c?\r\n\ ++ Supported escape sequences:\r\n\ ++ %c. - terminate connection\r\n\ ++ %c^Z - suspend ipmitool\r\n\ ++ %c^X - suspend ipmitool, but don't restore tty on restart\r\n\ ++ %cB - send break\r\n\ ++ %c? - this message\r\n\ ++ %c%c - send the escape character by typing it twice\r\n\ ++ (Note that escapes are only recognized immediately after newline.)\r\n", ++ ISOL_ESCAPE_CHARACTER, ++ ISOL_ESCAPE_CHARACTER, ++ ISOL_ESCAPE_CHARACTER, ++ ISOL_ESCAPE_CHARACTER, ++ ISOL_ESCAPE_CHARACTER, ++ ISOL_ESCAPE_CHARACTER, ++ ISOL_ESCAPE_CHARACTER, ++ ISOL_ESCAPE_CHARACTER); ++} ++ ++ ++ ++/* ++ * output ++ * ++ * Send the specified data to stdout ++ */ ++static void ++output(struct ipmi_rs * rsp) ++{ ++ if (rsp) ++ { ++ int i; ++ for (i = 0; i < rsp->data_len; ++i) ++ putc(rsp->data[i], stdout); ++ ++ fflush(stdout); ++ } ++} ++ ++/* ++ * ipmi_isol_deactivate ++ */ ++static int ++ipmi_isol_deactivate(struct ipmi_intf * intf) ++{ ++ struct ipmi_rs * rsp; ++ struct ipmi_rq req; ++ uint8_t data[6]; ++ struct isol_config_parameters params; ++ ++ memset(&req, 0, sizeof(req)); ++ req.msg.netfn = IPMI_NETFN_ISOL; ++ req.msg.cmd = ACTIVATE_ISOL; ++ req.msg.data = data; ++ req.msg.data_len = 5; + ++ memset(data, 0, 6); ++ data[0] = 0x00; /* Deactivate */ ++ data[1] = 0x00; ++ data[2] = 0x00; ++ data[3] = 0x00; ++ data[5] = 0x00; ++ ++ rsp = intf->sendrecv(intf, &req); ++ if (rsp == NULL) { ++ lprintf(LOG_ERR, "Error deactivating ISOL"); ++ return -1; ++ } ++ if (rsp->ccode > 0) { ++ lprintf(LOG_ERR, "Error deactivating ISOL: %s", ++ val2str(rsp->ccode, completion_code_vals)); ++ return -1; ++ } ++ /* response contain 4 additional bytes : 80 00 32 ff ++ Don't know what to use them for yet... */ + return 0; + } + +-int ipmi_isol_main(struct ipmi_intf * intf, int argc, char ** argv) ++/* ++ * processiSolUserInput ++ * ++ * Act on user input into the ISOL session. The only reason this ++ * is complicated is that we have to process escape sequences. ++ * ++ * return 0 on success ++ * 1 if we should exit ++ * < 0 on error (BMC probably closed the session) ++ */ ++static int ++processiSolUserInput(struct ipmi_intf * intf, ++ uint8_t * input, ++ uint16_t buffer_length) + { +- int ret = 0; ++ static int escape_pending = 0; ++ static int last_was_cr = 1; ++ struct ipmi_v2_payload v2_payload; ++ int length = 0; ++ int retval = 0; ++ char ch; ++ int i; ++ ++ memset(&v2_payload, 0, sizeof(v2_payload)); ++ ++ /* ++ * Our first order of business is to check the input for escape ++ * sequences to act on. ++ */ ++ for (i = 0; i < buffer_length; ++i) ++ { ++ ch = input[i]; ++ ++ if (escape_pending){ ++ escape_pending = 0; ++ ++ /* ++ * Process a possible escape sequence. ++ */ ++ switch (ch) { ++ case '.': ++ printf("%c. [terminated ipmitool]\r\n", ISOL_ESCAPE_CHARACTER); ++ retval = 1; ++ break; ++ case 'Z' - 64: ++ printf("%c^Z [suspend ipmitool]\r\n", ISOL_ESCAPE_CHARACTER); ++ suspendSelf(1); /* Restore tty back to raw */ ++ continue; ++ ++ case 'X' - 64: ++ printf("%c^X [suspend ipmitool]\r\n", ISOL_ESCAPE_CHARACTER); ++ suspendSelf(0); /* Don't restore to raw mode */ ++ continue; ++ ++ case 'B': ++ printf("%cb [send break]\r\n", ISOL_ESCAPE_CHARACTER); ++ sendBreak(intf); ++ continue; ++ ++ case '?': ++ printiSolEscapeSequences(); ++ continue; ++ default: ++ if (ch != ISOL_ESCAPE_CHARACTER) ++ v2_payload.payload.sol_packet.data[length++] = ++ ISOL_ESCAPE_CHARACTER; ++ v2_payload.payload.sol_packet.data[length++] = ch; ++ } ++ } + +- if (argc < 2 || strncmp(argv[0], "help", 4) == 0) { +- lprintf(LOG_NOTICE, "ISOL Commands: setup "); +- lprintf(LOG_NOTICE, "ISOL Baud Rates: 9600, 19200, 38400, 57600, 115200"); +- return 0; +- } +- +- if (strncmp(argv[0], "setup", 5) == 0) { +- if (strncmp(argv[1], "9600", 4) == 0) { +- ret = ipmi_isol_setup(intf, ISOL_BAUD_RATE_9600); +- } +- else if (strncmp(argv[1], "19200", 5) == 0) { +- ret = ipmi_isol_setup(intf, ISOL_BAUD_RATE_19200); ++ else ++ { ++ if (last_was_cr && (ch == ISOL_ESCAPE_CHARACTER)) { ++ escape_pending = 1; ++ continue; ++ } ++ ++ v2_payload.payload.sol_packet.data[length++] = ch; + } +- else if (strncmp(argv[1], "38400", 5) == 0) { +- ret = ipmi_isol_setup(intf, ISOL_BAUD_RATE_38400); ++ ++ ++ /* ++ * Normal character. Record whether it was a newline. ++ */ ++ last_was_cr = (ch == '\r' || ch == '\n'); ++ } ++ ++ /* ++ * If there is anything left to process we dispatch it to the BMC, ++ * send intf->session->sol_data.max_outbound_payload_size bytes ++ * at a time. ++ */ ++ if (length) ++ { ++ struct ipmi_rs * rsp; ++ ++ v2_payload.payload.sol_packet.flush_outbound = 1; /* Not sure if necessary ? */ ++ v2_payload.payload.sol_packet.character_count = length; ++ rsp = intf->send_sol(intf, &v2_payload); ++ ++ if (! rsp) { ++ lprintf(LOG_ERR, "Error sending SOL data"); ++ retval = -1; + } +- else if (strncmp(argv[1], "57600", 5) == 0) { +- ret = ipmi_isol_setup(intf, ISOL_BAUD_RATE_57600); ++ ++ /* If the sequence number is set we know we have new data */ ++ else if ((rsp->session.payloadtype == IPMI_PAYLOAD_TYPE_SOL) && ++ (rsp->payload.sol_packet.packet_sequence_number)) ++ output(rsp); ++ } ++ return retval; ++} ++ ++/* ++ * ipmi_isol_red_pill ++ */ ++static int ++ipmi_isol_red_pill(struct ipmi_intf * intf) ++{ ++ char * buffer; ++ int numRead; ++ int bShouldExit = 0; ++ int bBmcClosedSession = 0; ++ fd_set read_fds; ++ struct timeval tv; ++ int retval; ++ int buffer_size = 255; ++ int timedout = 0; ++ ++ buffer = (char*)malloc(buffer_size); ++ if (buffer == NULL) { ++ lprintf(LOG_ERR, "ipmitool: malloc failure"); ++ return -1; ++ } ++ ++ enter_raw_mode(); ++ ++ while (! bShouldExit) ++ { ++ FD_ZERO(&read_fds); ++ FD_SET(0, &read_fds); ++ FD_SET(intf->fd, &read_fds); ++ ++ /* Wait up to half a second */ ++ tv.tv_sec = 0; ++ tv.tv_usec = 500000; ++ ++ retval = select(intf->fd + 1, &read_fds, NULL, NULL, &tv); ++ ++ if (retval) ++ { ++ if (retval == -1) ++ { ++ /* ERROR */ ++ perror("select"); ++ return -1; ++ } ++ ++ timedout = 0; ++ ++ /* ++ * Process input from the user ++ */ ++ if (FD_ISSET(0, &read_fds)) ++ { ++ bzero(buffer, sizeof(buffer)); ++ numRead = read(fileno(stdin), ++ buffer, ++ buffer_size); ++ ++ if (numRead > 0) ++ { ++ int rc = processiSolUserInput(intf, buffer, numRead); ++ ++ if (rc) ++ { ++ if (rc < 0) ++ bShouldExit = bBmcClosedSession = 1; ++ else ++ bShouldExit = 1; ++ } ++ } ++ else ++ { ++ bShouldExit = 1; ++ } ++ } ++ ++ ++ /* ++ * Process input from the BMC ++ */ ++ else if (FD_ISSET(intf->fd, &read_fds)) ++ { ++ struct ipmi_rs * rs = intf->recv_sol(intf); ++ if (! rs) ++ { ++ bShouldExit = bBmcClosedSession = 1; ++ } ++ else ++ output(rs); ++ } ++ ++ ++ /* ++ * ERROR in select ++ */ ++ else ++ { ++ lprintf(LOG_ERR, "Error: Select returned with nothing to read"); ++ bShouldExit = 1; ++ } + } +- else if (strncmp(argv[1], "115200", 6) == 0) { +- ret = ipmi_isol_setup(intf, ISOL_BAUD_RATE_115200); ++ else ++ { ++ if ((++timedout) == 20) /* Every 10 seconds we send a keepalive */ ++ { ++ intf->keepalive(intf); ++ timedout = 0; ++ } + } +- else { +- lprintf(LOG_ERR, "ISOL - Unsupported baud rate: %s", argv[1]); +- ret = -1; ++ } ++ ++ leave_raw_mode(); ++ ++ if (bBmcClosedSession) ++ { ++ lprintf(LOG_ERR, "SOL session closed by BMC"); ++ } ++ else ++ ipmi_isol_deactivate(intf); ++ ++ return 0; ++} ++ ++/* ++ * ipmi_isol_activate ++ */ ++static int ++ipmi_isol_activate(struct ipmi_intf * intf) ++{ ++ struct ipmi_rs * rsp; ++ struct ipmi_rq req; ++ uint8_t data[6]; ++ struct isol_config_parameters params; ++ ++ if (ipmi_get_isol_info(intf, ¶ms)) ++ return -1; ++ ++ if (!(params.enabled & 0x1)) { ++ lprintf(LOG_ERR, "ISOL is not enabled!"); ++ return -1; ++ } ++ ++ /* ++ * Setup a callback so that the lanplus processing knows what ++ * to do with packets that come unexpectedly (while waiting for ++ * an ACK, perhaps. ++ */ ++ intf->session->sol_data.sol_input_handler = output; ++ ++ memset(&req, 0, sizeof(req)); ++ req.msg.netfn = IPMI_NETFN_ISOL; ++ req.msg.cmd = ACTIVATE_ISOL; ++ req.msg.data = data; ++ req.msg.data_len = 5; ++ ++ memset(data, 0, 6); ++ data[0] = 0x01; ++ data[1] = 0x00; ++ data[2] = 0x00; ++ data[3] = 0x00; ++ data[5] = 0x00; ++ ++ rsp = intf->sendrecv(intf, &req); ++ if (NULL != rsp) { ++ switch (rsp->ccode) { ++ case 0x00: ++ if (rsp->data_len == 4) { ++ break; ++ } else { ++ lprintf(LOG_ERR, "Error: Unexpected data length (%d) received " ++ "in ISOL activation response", ++ rsp->data_len); ++ return -1; ++ } ++ break; ++ case 0x80: ++ lprintf(LOG_ERR, "Info: ISOL already active on another session"); ++ return -1; ++ case 0x81: ++ lprintf(LOG_ERR, "Info: ISOL disabled"); ++ return -1; ++ case 0x82: ++ lprintf(LOG_ERR, "Info: ISOL activation limit reached"); ++ return -1; ++ default: ++ lprintf(LOG_ERR, "Error activating ISOL: %s", ++ val2str(rsp->ccode, completion_code_vals)); ++ return -1; ++ } ++ } else { ++ lprintf(LOG_ERR, "Error: No response activating ISOL"); ++ return -1; ++ } ++ ++ /* response contain 4 additional bytes : 80 01 32 ff ++ Don't know what to use them for yet... */ ++ ++ printf("[SOL Session operational. Use %c? for help]\r\n", ++ ISOL_ESCAPE_CHARACTER); ++ ++ /* ++ * At this point we are good to go with our SOL session. We ++ * need to listen to ++ * 1) STDIN for user input ++ * 2) The FD for incoming SOL packets ++ */ ++ if (ipmi_isol_red_pill(intf)) { ++ lprintf(LOG_ERR, "Error in SOL session"); ++ return -1; ++ } ++ ++ return 0; ++} ++ ++static void print_isol_set_usage(void) { ++ lprintf(LOG_NOTICE, "\nISOL set parameters and values: \n"); ++ lprintf(LOG_NOTICE, " enabled true | false"); ++ lprintf(LOG_NOTICE, " privilege-level user | operator | admin | oem"); ++ lprintf(LOG_NOTICE, " bit-rate " ++ "9.6 | 19.2 | 38.4 | 57.6 | 115.2"); ++ lprintf(LOG_NOTICE, ""); ++} ++ ++static void print_isol_usage(void) { ++ lprintf(LOG_NOTICE, "ISOL Commands: info"); ++ lprintf(LOG_NOTICE, " set "); ++ lprintf(LOG_NOTICE, " activate"); ++} ++ ++int ipmi_isol_main(struct ipmi_intf * intf, int argc, char ** argv) ++{ ++ int ret = 0; ++ ++ /* ++ * Help ++ */ ++ if (!argc || !strncmp(argv[0], "help", 4)) ++ print_isol_usage(); ++ ++ /* ++ * Info ++ */ ++ else if (!strncmp(argv[0], "info", 4)) { ++ ret = ipmi_print_isol_info(intf); ++ } ++ ++ /* ++ * Set a parameter value ++ */ ++ else if (!strncmp(argv[0], "set", 3)) { ++ if (argc < 3) { ++ print_isol_set_usage(); ++ return -1; + } ++ ret = ipmi_isol_set_param(intf, argv[1], argv[2]); ++ } ++ ++ /* ++ * Activate ++ */ ++ else if (!strncmp(argv[0], "activate", 8)) { ++ ret = ipmi_isol_activate(intf); ++ } ++ ++ else { ++ print_isol_usage(); ++ ret = -1; + } ++ + return ret; + } +diff -urN ipmitool-1.8.9.orig/lib/ipmi_isol.c.orig ipmitool-1.8.9/lib/ipmi_isol.c.orig +--- ipmitool-1.8.9.orig/lib/ipmi_isol.c.orig 1970-01-01 01:00:00.000000000 +0100 ++++ ipmitool-1.8.9/lib/ipmi_isol.c.orig 2007-02-22 08:38:56.000000000 +0000 +@@ -0,0 +1,191 @@ ++/* ++ * Copyright (c) 2003 Sun Microsystems, Inc. All Rights Reserved. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions ++ * are met: ++ * ++ * Redistribution of source code must retain the above copyright ++ * notice, this list of conditions and the following disclaimer. ++ * ++ * Redistribution in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * ++ * Neither the name of Sun Microsystems, Inc. or the names of ++ * contributors may be used to endorse or promote products derived ++ * from this software without specific prior written permission. ++ * ++ * This software is provided "AS IS," without a warranty of any kind. ++ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, ++ * INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A ++ * PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY EXCLUDED. ++ * SUN MICROSYSTEMS, INC. ("SUN") AND ITS LICENSORS SHALL NOT BE LIABLE ++ * FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING ++ * OR DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES. IN NO EVENT WILL ++ * SUN OR ITS LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA, ++ * OR FOR DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR ++ * PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF ++ * LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE, ++ * EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. ++ */ ++ ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++const struct valstr ipmi_isol_baud_vals[] = { ++ { ISOL_BAUD_RATE_9600, "9600" }, ++ { ISOL_BAUD_RATE_19200, "19200" }, ++ { ISOL_BAUD_RATE_38400, "38400" }, ++ { ISOL_BAUD_RATE_57600, "57600" }, ++ { ISOL_BAUD_RATE_115200, "115200" }, ++ { 0x00, NULL } ++}; ++ ++extern int verbose; ++ ++static int ipmi_isol_setup(struct ipmi_intf * intf, char baudsetting) ++{ ++ struct ipmi_rs * rsp; ++ struct ipmi_rq req; ++ unsigned char data[6]; ++ ++ /* TEST FOR AVAILABILITY */ ++ ++ memset(data, 0, 6); ++ data[0] = 0x00; ++ data[1] = ISOL_ENABLE_PARAM; ++ data[2] = ISOL_ENABLE_FLAG; ++ ++ memset(&req, 0, sizeof(req)); ++ req.msg.netfn = IPMI_NETFN_ISOL; ++ req.msg.cmd = SET_ISOL_CONFIG; ++ req.msg.data = data; ++ req.msg.data_len = 3; ++ ++ rsp = intf->sendrecv(intf, &req); ++ if (rsp == NULL) { ++ lprintf(LOG_ERR, "Error in Set ISOL Config Command"); ++ return -1; ++ } ++ if (rsp->ccode == 0xc1) { ++ lprintf(LOG_ERR, "IPMI v1.5 Serial Over Lan (ISOL) not supported!"); ++ return -1; ++ } ++ if (rsp->ccode > 0) { ++ lprintf(LOG_ERR, "Error in Set ISOL Config Command: %s", ++ val2str(rsp->ccode, completion_code_vals)); ++ return -1; ++ } ++ ++ /* GET ISOL CONFIG */ ++ ++ memset(data, 0, 6); ++ data[0] = 0x00; ++ data[1] = ISOL_AUTHENTICATION_PARAM; ++ data[2] = 0x00; /* block */ ++ data[3] = 0x00; /* selector */ ++ req.msg.cmd = GET_ISOL_CONFIG; ++ req.msg.data_len = 4; ++ ++ rsp = intf->sendrecv(intf, &req); ++ if (rsp == NULL) { ++ lprintf(LOG_ERR, "Error in Get ISOL Config Command"); ++ return -1; ++ } ++ if (rsp->ccode > 0) { ++ lprintf(LOG_ERR, "Error in Get ISOL Config Command: %s", ++ val2str(rsp->ccode, completion_code_vals)); ++ return -1; ++ } ++ ++ if (verbose > 1) ++ printbuf(rsp->data, rsp->data_len, "ISOL Config"); ++ ++ /* SET ISOL CONFIG - AUTHENTICATION */ ++ ++ memset(data, 0, 6); ++ data[0] = 0x00; ++ data[1] = ISOL_AUTHENTICATION_PARAM; ++ data[2] = ISOL_PRIVILEGE_LEVEL_USER | (rsp->data[1] & 0x80); ++ req.msg.cmd = SET_ISOL_CONFIG; ++ req.msg.data_len = 3; ++ ++ rsp = intf->sendrecv(intf, &req); ++ if (rsp == NULL) { ++ lprintf(LOG_ERR, "Error in Set ISOL Config (Authentication) Command"); ++ return -1; ++ } ++ if (rsp->ccode > 0) { ++ lprintf(LOG_ERR, "Error in Set ISOL Config (Authentication) Command: %s", ++ val2str(rsp->ccode, completion_code_vals)); ++ return -1; ++ } ++ ++ /* SET ISOL CONFIG - BAUD RATE */ ++ ++ memset(data, 0, 6); ++ data[0] = 0x00; ++ data[1] = ISOL_BAUD_RATE_PARAM; ++ data[2] = baudsetting; ++ req.msg.cmd = SET_ISOL_CONFIG; ++ req.msg.data_len = 3; ++ ++ rsp = intf->sendrecv(intf, &req); ++ if (rsp == NULL) { ++ lprintf(LOG_ERR, "Error in Set ISOL Config (Baud Rate) Command"); ++ return -1; ++ } ++ if (rsp->ccode > 0) { ++ lprintf(LOG_ERR, "Error in Set ISOL Config (Baud Rate) Command: %s", ++ val2str(rsp->ccode, completion_code_vals)); ++ return -1; ++ } ++ ++ printf("Set ISOL Baud Rate to %s\n", ++ val2str(baudsetting, ipmi_isol_baud_vals)); ++ ++ return 0; ++} ++ ++int ipmi_isol_main(struct ipmi_intf * intf, int argc, char ** argv) ++{ ++ int ret = 0; ++ ++ if (argc < 2 || strncmp(argv[0], "help", 4) == 0) { ++ lprintf(LOG_NOTICE, "ISOL Commands: setup "); ++ lprintf(LOG_NOTICE, "ISOL Baud Rates: 9600, 19200, 38400, 57600, 115200"); ++ return 0; ++ } ++ ++ if (strncmp(argv[0], "setup", 5) == 0) { ++ if (strncmp(argv[1], "9600", 4) == 0) { ++ ret = ipmi_isol_setup(intf, ISOL_BAUD_RATE_9600); ++ } ++ else if (strncmp(argv[1], "19200", 5) == 0) { ++ ret = ipmi_isol_setup(intf, ISOL_BAUD_RATE_19200); ++ } ++ else if (strncmp(argv[1], "38400", 5) == 0) { ++ ret = ipmi_isol_setup(intf, ISOL_BAUD_RATE_38400); ++ } ++ else if (strncmp(argv[1], "57600", 5) == 0) { ++ ret = ipmi_isol_setup(intf, ISOL_BAUD_RATE_57600); ++ } ++ else if (strncmp(argv[1], "115200", 6) == 0) { ++ ret = ipmi_isol_setup(intf, ISOL_BAUD_RATE_115200); ++ } ++ else { ++ lprintf(LOG_ERR, "ISOL - Unsupported baud rate: %s", argv[1]); ++ ret = -1; ++ } ++ } ++ return ret; ++} +diff -urN ipmitool-1.8.9.orig/src/plugins/lan/lan.c ipmitool-1.8.9/src/plugins/lan/lan.c +--- ipmitool-1.8.9.orig/src/plugins/lan/lan.c 2007-02-22 08:38:57.000000000 +0000 ++++ ipmitool-1.8.9/src/plugins/lan/lan.c 2007-12-13 10:16:57.063986495 +0000 +@@ -79,6 +79,11 @@ + static struct ipmi_rs * ipmi_lan_poll_recv(struct ipmi_intf * intf); + static int ipmi_lan_setup(struct ipmi_intf * intf); + static int ipmi_lan_keepalive(struct ipmi_intf * intf); ++static struct ipmi_rs * ipmi_lan_send_payload(struct ipmi_intf * intf, ++ struct ipmi_v2_payload * payload); ++static struct ipmi_rs * ipmi_lan_recv_sol(struct ipmi_intf * intf); ++static struct ipmi_rs * ipmi_lan_send_sol(struct ipmi_intf * intf, ++ struct ipmi_v2_payload * payload); + static struct ipmi_rs * ipmi_lan_send_cmd(struct ipmi_intf * intf, struct ipmi_rq * req); + static int ipmi_lan_send_rsp(struct ipmi_intf * intf, struct ipmi_rs * rsp); + static int ipmi_lan_open(struct ipmi_intf * intf); +@@ -93,6 +98,8 @@ + close: ipmi_lan_close, + sendrecv: ipmi_lan_send_cmd, + sendrsp: ipmi_lan_send_rsp, ++ recv_sol: ipmi_lan_recv_sol, ++ send_sol: ipmi_lan_send_sol, + keepalive: ipmi_lan_keepalive, + target_addr: IPMI_BMC_SLAVE_ADDR, + }; +@@ -456,80 +463,141 @@ + memcpy(&rsp->session.id, rsp->data+x, 4); + x += 4; + +- if (intf->session->active && (rsp->session.authtype || intf->session->authtype)) +- x += 16; +- +- rsp->session.msglen = rsp->data[x++]; +- rsp->payload.ipmi_response.rq_addr = rsp->data[x++]; +- rsp->payload.ipmi_response.netfn = rsp->data[x] >> 2; +- rsp->payload.ipmi_response.rq_lun = rsp->data[x++] & 0x3; +- x++; /* checksum */ +- rsp->payload.ipmi_response.rs_addr = rsp->data[x++]; +- rsp->payload.ipmi_response.rq_seq = rsp->data[x] >> 2; +- rsp->payload.ipmi_response.rs_lun = rsp->data[x++] & 0x3; +- rsp->payload.ipmi_response.cmd = rsp->data[x++]; +- rsp->ccode = rsp->data[x++]; +- +- if (verbose > 2) +- printbuf(rsp->data, rsp->data_len, "ipmi message header"); +- +- lprintf(LOG_DEBUG+1, "<< IPMI Response Session Header"); +- lprintf(LOG_DEBUG+1, "<< Authtype : %s", +- val2str(rsp->session.authtype, ipmi_authtype_session_vals)); +- lprintf(LOG_DEBUG+1, "<< Sequence : 0x%08lx", +- (long)rsp->session.seq); +- lprintf(LOG_DEBUG+1, "<< Session ID : 0x%08lx", +- (long)rsp->session.id); +- lprintf(LOG_DEBUG+1, "<< IPMI Response Message Header"); +- lprintf(LOG_DEBUG+1, "<< Rq Addr : %02x", +- rsp->payload.ipmi_response.rq_addr); +- lprintf(LOG_DEBUG+1, "<< NetFn : %02x", +- rsp->payload.ipmi_response.netfn); +- lprintf(LOG_DEBUG+1, "<< Rq LUN : %01x", +- rsp->payload.ipmi_response.rq_lun); +- lprintf(LOG_DEBUG+1, "<< Rs Addr : %02x", +- rsp->payload.ipmi_response.rs_addr); +- lprintf(LOG_DEBUG+1, "<< Rq Seq : %02x", +- rsp->payload.ipmi_response.rq_seq); +- lprintf(LOG_DEBUG+1, "<< Rs Lun : %01x", +- rsp->payload.ipmi_response.rs_lun); +- lprintf(LOG_DEBUG+1, "<< Command : %02x", +- rsp->payload.ipmi_response.cmd); +- lprintf(LOG_DEBUG+1, "<< Compl Code : 0x%02x", +- rsp->ccode); +- +- /* now see if we have outstanding entry in request list */ +- entry = ipmi_req_lookup_entry(rsp->payload.ipmi_response.rq_seq, +- rsp->payload.ipmi_response.cmd); +- if (entry) { +- lprintf(LOG_DEBUG+2, "IPMI Request Match found"); +- if ((intf->target_addr != our_address) && bridge_possible) { +- if ((rsp->data_len) && +- (rsp->payload.ipmi_response.cmd != 0x34)) { +- printbuf(&rsp->data[x], rsp->data_len-x, +- "bridge command response"); +- } +- /* bridged command: lose extra header */ +- if (rsp->payload.ipmi_response.cmd == 0x34) { +- if (rsp->data_len == 38) { +- entry->req.msg.cmd = entry->req.msg.target_cmd; +- rsp = ipmi_lan_recv_packet(intf); +- continue; ++ if (rsp->session.id == (intf->session->session_id + 0x10000000)) { ++ /* With SOL, authtype is always NONE, so we have no authcode */ ++ rsp->session.payloadtype = IPMI_PAYLOAD_TYPE_SOL; ++ ++ rsp->session.msglen = rsp->data[x++]; ++ ++ rsp->payload.sol_packet.packet_sequence_number = ++ rsp->data[x++] & 0x0F; ++ ++ rsp->payload.sol_packet.acked_packet_number = ++ rsp->data[x++] & 0x0F; ++ ++ rsp->payload.sol_packet.accepted_character_count = ++ rsp->data[x++]; ++ ++ rsp->payload.sol_packet.is_nack = ++ rsp->data[x] & 0x40; ++ ++ rsp->payload.sol_packet.transfer_unavailable = ++ rsp->data[x] & 0x20; ++ ++ rsp->payload.sol_packet.sol_inactive = ++ rsp->data[x] & 0x10; ++ ++ rsp->payload.sol_packet.transmit_overrun = ++ rsp->data[x] & 0x08; ++ ++ rsp->payload.sol_packet.break_detected = ++ rsp->data[x++] & 0x04; ++ ++ x++; /* On ISOL there's and additional fifth byte before the data starts */ ++ ++ lprintf(LOG_DEBUG, "SOL sequence number : 0x%02x", ++ rsp->payload.sol_packet.packet_sequence_number); ++ ++ lprintf(LOG_DEBUG, "SOL acked packet : 0x%02x", ++ rsp->payload.sol_packet.acked_packet_number); ++ ++ lprintf(LOG_DEBUG, "SOL accepted char count : 0x%02x", ++ rsp->payload.sol_packet.accepted_character_count); ++ ++ lprintf(LOG_DEBUG, "SOL is nack : %s", ++ rsp->payload.sol_packet.is_nack? "true" : "false"); ++ ++ lprintf(LOG_DEBUG, "SOL xfer unavailable : %s", ++ rsp->payload.sol_packet.transfer_unavailable? "true" : "false"); ++ ++ lprintf(LOG_DEBUG, "SOL inactive : %s", ++ rsp->payload.sol_packet.sol_inactive? "true" : "false"); ++ ++ lprintf(LOG_DEBUG, "SOL transmit overrun : %s", ++ rsp->payload.sol_packet.transmit_overrun? "true" : "false"); ++ ++ lprintf(LOG_DEBUG, "SOL break detected : %s", ++ rsp->payload.sol_packet.break_detected? "true" : "false"); ++ } ++ else ++ { ++ /* Standard IPMI 1.5 packet */ ++ rsp->session.payloadtype = IPMI_PAYLOAD_TYPE_IPMI; ++ if (intf->session->active && (rsp->session.authtype || intf->session->authtype)) ++ x += 16; ++ ++ rsp->session.msglen = rsp->data[x++]; ++ rsp->payload.ipmi_response.rq_addr = rsp->data[x++]; ++ rsp->payload.ipmi_response.netfn = rsp->data[x] >> 2; ++ rsp->payload.ipmi_response.rq_lun = rsp->data[x++] & 0x3; ++ x++; /* checksum */ ++ rsp->payload.ipmi_response.rs_addr = rsp->data[x++]; ++ rsp->payload.ipmi_response.rq_seq = rsp->data[x] >> 2; ++ rsp->payload.ipmi_response.rs_lun = rsp->data[x++] & 0x3; ++ rsp->payload.ipmi_response.cmd = rsp->data[x++]; ++ rsp->ccode = rsp->data[x++]; ++ ++ if (verbose > 2) ++ printbuf(rsp->data, rsp->data_len, "ipmi message header"); ++ ++ lprintf(LOG_DEBUG+1, "<< IPMI Response Session Header"); ++ lprintf(LOG_DEBUG+1, "<< Authtype : %s", ++ val2str(rsp->session.authtype, ipmi_authtype_session_vals)); ++ lprintf(LOG_DEBUG+1, "<< Sequence : 0x%08lx", ++ (long)rsp->session.seq); ++ lprintf(LOG_DEBUG+1, "<< Session ID : 0x%08lx", ++ (long)rsp->session.id); ++ lprintf(LOG_DEBUG+1, "<< IPMI Response Message Header"); ++ lprintf(LOG_DEBUG+1, "<< Rq Addr : %02x", ++ rsp->payload.ipmi_response.rq_addr); ++ lprintf(LOG_DEBUG+1, "<< NetFn : %02x", ++ rsp->payload.ipmi_response.netfn); ++ lprintf(LOG_DEBUG+1, "<< Rq LUN : %01x", ++ rsp->payload.ipmi_response.rq_lun); ++ lprintf(LOG_DEBUG+1, "<< Rs Addr : %02x", ++ rsp->payload.ipmi_response.rs_addr); ++ lprintf(LOG_DEBUG+1, "<< Rq Seq : %02x", ++ rsp->payload.ipmi_response.rq_seq); ++ lprintf(LOG_DEBUG+1, "<< Rs Lun : %01x", ++ rsp->payload.ipmi_response.rs_lun); ++ lprintf(LOG_DEBUG+1, "<< Command : %02x", ++ rsp->payload.ipmi_response.cmd); ++ lprintf(LOG_DEBUG+1, "<< Compl Code : 0x%02x", ++ rsp->ccode); ++ ++ /* now see if we have outstanding entry in request list */ ++ entry = ipmi_req_lookup_entry(rsp->payload.ipmi_response.rq_seq, ++ rsp->payload.ipmi_response.cmd); ++ if (entry) { ++ lprintf(LOG_DEBUG+2, "IPMI Request Match found"); ++ if ((intf->target_addr != our_address) && bridge_possible) { ++ if ((rsp->data_len) && ++ (rsp->payload.ipmi_response.cmd != 0x34)) { ++ printbuf(&rsp->data[x], rsp->data_len-x, ++ "bridge command response"); ++ } ++ /* bridged command: lose extra header */ ++ if (rsp->payload.ipmi_response.cmd == 0x34) { ++ if (rsp->data_len == 38) { ++ entry->req.msg.cmd = entry->req.msg.target_cmd; ++ rsp = ipmi_lan_recv_packet(intf); ++ continue; ++ } ++ } else { ++ //x += sizeof(rsp->payload.ipmi_response); ++ if (rsp->data[x-1] != 0) ++ lprintf(LOG_DEBUG, "WARNING: Bridged " ++ "cmd ccode = 0x%02x", ++ rsp->data[x-1]); + } +- } else { +- //x += sizeof(rsp->payload.ipmi_response); +- if (rsp->data[x-1] != 0) +- lprintf(LOG_DEBUG, "WARNING: Bridged " +- "cmd ccode = 0x%02x", +- rsp->data[x-1]); + } ++ ipmi_req_remove_entry(rsp->payload.ipmi_response.rq_seq, ++ rsp->payload.ipmi_response.cmd); ++ } else { ++ lprintf(LOG_INFO, "IPMI Request Match NOT FOUND"); ++ rsp = ipmi_lan_recv_packet(intf); ++ continue; + } +- ipmi_req_remove_entry(rsp->payload.ipmi_response.rq_seq, +- rsp->payload.ipmi_response.cmd); +- } else { +- lprintf(LOG_INFO, "IPMI Request Match NOT FOUND"); +- rsp = ipmi_lan_recv_packet(intf); +- continue; + } + + break; +@@ -537,7 +605,9 @@ + + /* shift response data to start of array */ + if (rsp && rsp->data_len > x) { +- rsp->data_len -= x + 1; ++ rsp->data_len -= x; ++ if (rsp->session.payloadtype == IPMI_PAYLOAD_TYPE_IPMI) ++ rsp->data_len -= 1; /* We don't want the checksum */ + memmove(rsp->data, rsp->data + x, rsp->data_len); + memset(rsp->data + rsp->data_len, 0, IPMI_BUF_SIZE - rsp->data_len); + } +@@ -553,9 +623,9 @@ + * | rmcp.seq | + * | rmcp.class | + * +--------------------+ +- * | session.authtype | 9 bytes +- * | session.seq | +- * | session.id | ++ * | session.authtype | 9 bytes ++ * | session.seq | ++ * | session.id | + * +--------------------+ + * | [session.authcode] | 16 bytes (AUTHTYPE != none) + * +--------------------+ +@@ -910,6 +980,430 @@ + return 0; + } + ++/* ++ * IPMI SOL Payload Format ++ * +--------------------+ ++ * | rmcp.ver | 4 bytes ++ * | rmcp.__reserved | ++ * | rmcp.seq | ++ * | rmcp.class | ++ * +--------------------+ ++ * | session.authtype | 9 bytes ++ * | session.seq | ++ * | session.id | ++ * +--------------------+ ++ * | message length | 1 byte ++ * +--------------------+ ++ * | sol.seq | 5 bytes ++ * | sol.ack_seq | ++ * | sol.acc_count | ++ * | sol.control | ++ * | sol.__reserved | ++ * +--------------------+ ++ * | [request data] | data_len bytes ++ * +--------------------+ ++ */ ++uint8_t * ipmi_lan_build_sol_msg(struct ipmi_intf * intf, ++ struct ipmi_v2_payload * payload, ++ int * llen) ++{ ++ struct rmcp_hdr rmcp = { ++ .ver = RMCP_VERSION_1, ++ .class = RMCP_CLASS_IPMI, ++ .seq = 0xff, ++ }; ++ struct ipmi_session * session = intf->session; ++ ++ /* msg will hold the entire message to be sent */ ++ uint8_t * msg; ++ ++ int len = 0; ++ ++ len = sizeof(rmcp) + // RMCP Header (4) ++ 10 + // IPMI Session Header ++ 5 + // SOL header ++ payload->payload.sol_packet.character_count; // The actual payload ++ ++ msg = malloc(len); ++ if (msg == NULL) { ++ lprintf(LOG_ERR, "ipmitool: malloc failure"); ++ return; ++ } ++ memset(msg, 0, len); ++ ++ /* rmcp header */ ++ memcpy(msg, &rmcp, sizeof(rmcp)); ++ len = sizeof(rmcp); ++ ++ /* ipmi session header */ ++ msg[len++] = 0; /* SOL is always authtype = NONE */ ++ msg[len++] = session->in_seq & 0xff; ++ msg[len++] = (session->in_seq >> 8) & 0xff; ++ msg[len++] = (session->in_seq >> 16) & 0xff; ++ msg[len++] = (session->in_seq >> 24) & 0xff; ++ ++ msg[len++] = session->session_id & 0xff; ++ msg[len++] = (session->session_id >> 8) & 0xff; ++ msg[len++] = (session->session_id >> 16) & 0xff; ++ msg[len++] = ((session->session_id >> 24) + 0x10) & 0xff; /* Add 0x10 to MSB for SOL */ ++ ++ msg[len++] = payload->payload.sol_packet.character_count + 5; ++ ++ /* sol header */ ++ msg[len++] = payload->payload.sol_packet.packet_sequence_number; ++ msg[len++] = payload->payload.sol_packet.acked_packet_number; ++ msg[len++] = payload->payload.sol_packet.accepted_character_count; ++ msg[len] = payload->payload.sol_packet.is_nack ? 0x40 : 0; ++ msg[len] |= payload->payload.sol_packet.assert_ring_wor ? 0x20 : 0; ++ msg[len] |= payload->payload.sol_packet.generate_break ? 0x10 : 0; ++ msg[len] |= payload->payload.sol_packet.deassert_cts ? 0x08 : 0; ++ msg[len] |= payload->payload.sol_packet.deassert_dcd_dsr ? 0x04 : 0; ++ msg[len] |= payload->payload.sol_packet.flush_inbound ? 0x02 : 0; ++ msg[len++] |= payload->payload.sol_packet.flush_outbound ? 0x01 : 0; ++ ++ len++; /* On SOL there's and additional fifth byte before the data starts */ ++ ++ if (payload->payload.sol_packet.character_count) { ++ /* We may have data to add */ ++ memcpy(msg + len, ++ payload->payload.sol_packet.data, ++ payload->payload.sol_packet.character_count); ++ len += payload->payload.sol_packet.character_count; ++ } ++ ++ session->in_seq++; ++ if (session->in_seq == 0) ++ session->in_seq++; ++ ++ *llen = len; ++ return msg; ++} ++ ++/* ++ * is_sol_packet ++ */ ++static int ++is_sol_packet(struct ipmi_rs * rsp) ++{ ++ return (rsp && ++ (rsp->session.payloadtype == IPMI_PAYLOAD_TYPE_SOL)); ++} ++ ++ ++ ++/* ++ * sol_response_acks_packet ++ */ ++static int ++sol_response_acks_packet(struct ipmi_rs * rsp, ++ struct ipmi_v2_payload * payload) ++{ ++ return (is_sol_packet(rsp) && ++ payload && ++ (payload->payload_type == IPMI_PAYLOAD_TYPE_SOL) && ++ (rsp->payload.sol_packet.acked_packet_number == ++ payload->payload.sol_packet.packet_sequence_number)); ++} ++ ++/* ++ * ipmi_lan_send_sol_payload ++ * ++ */ ++static struct ipmi_rs * ++ipmi_lan_send_sol_payload(struct ipmi_intf * intf, ++ struct ipmi_v2_payload * payload) ++{ ++ struct ipmi_rs * rsp = NULL; ++ uint8_t * msg; ++ int len; ++ int try = 0; ++ ++ if (intf->opened == 0 && intf->open != NULL) { ++ if (intf->open(intf) < 0) ++ return NULL; ++ } ++ ++ msg = ipmi_lan_build_sol_msg(intf, payload, &len); ++ if (len <= 0 || msg == NULL) { ++ lprintf(LOG_ERR, "Invalid SOL payload packet"); ++ if (msg != NULL) ++ free(msg); ++ return NULL; ++ } ++ ++ lprintf(LOG_DEBUG, ">> SENDING A SOL MESSAGE\n"); ++ ++ for (;;) { ++ if (ipmi_lan_send_packet(intf, msg, len) < 0) { ++ try++; ++ usleep(5000); ++ continue; ++ } ++ ++ /* if we are set to noanswer we do not expect response */ ++ if (intf->noanswer) ++ break; ++ ++ if (payload->payload.sol_packet.packet_sequence_number == 0) { ++ /* We're just sending an ACK. No need to retry. */ ++ break; ++ } ++ ++ usleep(100); ++ ++ rsp = ipmi_lan_recv_sol(intf); /* Grab the next packet */ ++ ++ if (sol_response_acks_packet(rsp, payload)) ++ break; ++ ++ else if (is_sol_packet(rsp) && rsp->data_len) ++ { ++ /* ++ * We're still waiting for our ACK, but we more data from ++ * the BMC ++ */ ++ intf->session->sol_data.sol_input_handler(rsp); ++ } ++ ++ usleep(5000); ++ if (++try >= intf->session->retry) { ++ lprintf(LOG_DEBUG, " No response from remote controller"); ++ break; ++ } ++ } ++ ++ return rsp; ++} ++ ++/* ++ * is_sol_partial_ack ++ * ++ * Determine if the response is a partial ACK/NACK that indicates ++ * we need to resend part of our packet. ++ * ++ * returns the number of characters we need to resend, or ++ * 0 if this isn't an ACK or we don't need to resend anything ++ */ ++static int is_sol_partial_ack(struct ipmi_v2_payload * v2_payload, ++ struct ipmi_rs * rsp) ++{ ++ int chars_to_resend = 0; ++ ++ if (v2_payload && ++ rsp && ++ is_sol_packet(rsp) && ++ sol_response_acks_packet(rsp, v2_payload) && ++ (rsp->payload.sol_packet.accepted_character_count < ++ v2_payload->payload.sol_packet.character_count)) ++ { ++ if (rsp->payload.sol_packet.accepted_character_count == 0) { ++ /* We should not resend data */ ++ chars_to_resend = 0; ++ } ++ else ++ { ++ chars_to_resend = ++ v2_payload->payload.sol_packet.character_count - ++ rsp->payload.sol_packet.accepted_character_count; ++ } ++ } ++ ++ return chars_to_resend; ++} ++ ++/* ++ * set_sol_packet_sequence_number ++ */ ++static void set_sol_packet_sequence_number(struct ipmi_intf * intf, ++ struct ipmi_v2_payload * v2_payload) ++{ ++ /* Keep our sequence number sane */ ++ if (intf->session->sol_data.sequence_number > 0x0F) ++ intf->session->sol_data.sequence_number = 1; ++ ++ v2_payload->payload.sol_packet.packet_sequence_number = ++ intf->session->sol_data.sequence_number++; ++} ++ ++/* ++ * ipmi_lan_send_sol ++ * ++ * Sends a SOL packet.. We handle partial ACK/NACKs from the BMC here. ++ * ++ * Returns a pointer to the SOL ACK we received, or ++ * 0 on failure ++ * ++ */ ++struct ipmi_rs * ++ipmi_lan_send_sol(struct ipmi_intf * intf, ++ struct ipmi_v2_payload * v2_payload) ++{ ++ struct ipmi_rs * rsp; ++ int chars_to_resend = 0; ++ ++ v2_payload->payload_type = IPMI_PAYLOAD_TYPE_SOL; ++ ++ /* ++ * Payload length is just the length of the character ++ * data here. ++ */ ++ v2_payload->payload.sol_packet.acked_packet_number = 0; /* NA */ ++ ++ set_sol_packet_sequence_number(intf, v2_payload); ++ ++ v2_payload->payload.sol_packet.accepted_character_count = 0; /* NA */ ++ ++ rsp = ipmi_lan_send_sol_payload(intf, v2_payload); ++ ++ /* Determine if we need to resend some of our data */ ++ chars_to_resend = is_sol_partial_ack(v2_payload, rsp); ++ ++ while (chars_to_resend) ++ { ++ /* ++ * We first need to handle any new data we might have ++ * received in our NACK ++ */ ++ if (rsp->data_len) ++ intf->session->sol_data.sol_input_handler(rsp); ++ ++ set_sol_packet_sequence_number(intf, v2_payload); ++ ++ /* Just send the required data */ ++ memmove(v2_payload->payload.sol_packet.data, ++ v2_payload->payload.sol_packet.data + ++ rsp->payload.sol_packet.accepted_character_count, ++ chars_to_resend); ++ ++ v2_payload->payload.sol_packet.character_count = chars_to_resend; ++ ++ rsp = ipmi_lan_send_sol_payload(intf, v2_payload); ++ ++ chars_to_resend = is_sol_partial_ack(v2_payload, rsp); ++ } ++ ++ return rsp; ++} ++ ++/* ++ * check_sol_packet_for_new_data ++ * ++ * Determine whether the SOL packet has already been seen ++ * and whether the packet has new data for us. ++ * ++ * This function has the side effect of removing an previously ++ * seen data, and moving new data to the front. ++ * ++ * It also "Remembers" the data so we don't get repeats. ++ * ++ */ ++static int ++check_sol_packet_for_new_data(struct ipmi_intf * intf, ++ struct ipmi_rs *rsp) ++{ ++ static uint8_t last_received_sequence_number = 0; ++ static uint8_t last_received_byte_count = 0; ++ int new_data_size = 0; ++ ++ if (rsp && ++ (rsp->session.payloadtype == IPMI_PAYLOAD_TYPE_SOL)) ++ ++ { ++ uint8_t unaltered_data_len = rsp->data_len; ++ if (rsp->payload.sol_packet.packet_sequence_number == ++ last_received_sequence_number) ++ { ++ /* ++ * This is the same as the last packet, but may include ++ * extra data ++ */ ++ new_data_size = rsp->data_len - last_received_byte_count; ++ ++ if (new_data_size > 0) ++ { ++ /* We have more data to process */ ++ memmove(rsp->data, ++ rsp->data + ++ rsp->data_len - new_data_size, ++ new_data_size); ++ } ++ ++ rsp->data_len = new_data_size; ++ } ++ ++ /* ++ *Rember the data for next round ++ */ ++ if (rsp && rsp->payload.sol_packet.packet_sequence_number) ++ { ++ last_received_sequence_number = ++ rsp->payload.sol_packet.packet_sequence_number; ++ last_received_byte_count = unaltered_data_len; ++ } ++ } ++ ++ return new_data_size; ++} ++ ++/* ++ * ack_sol_packet ++ * ++ * Provided the specified packet looks reasonable, ACK it. ++ */ ++static void ++ack_sol_packet(struct ipmi_intf * intf, ++ struct ipmi_rs * rsp) ++{ ++ if (rsp && ++ (rsp->session.payloadtype == IPMI_PAYLOAD_TYPE_SOL) && ++ (rsp->payload.sol_packet.packet_sequence_number)) ++ { ++ struct ipmi_v2_payload ack; ++ ++ memset(&ack, 0, sizeof(struct ipmi_v2_payload)); ++ ++ ack.payload_type = IPMI_PAYLOAD_TYPE_SOL; ++ ++ /* ++ * Payload length is just the length of the character ++ * data here. ++ */ ++ ack.payload_length = 0; ++ ++ /* ACK packets have sequence numbers of 0 */ ++ ack.payload.sol_packet.packet_sequence_number = 0; ++ ++ ack.payload.sol_packet.acked_packet_number = ++ rsp->payload.sol_packet.packet_sequence_number; ++ ++ ack.payload.sol_packet.accepted_character_count = rsp->data_len; ++ ++ ipmi_lan_send_sol_payload(intf, &ack); ++ } ++} ++ ++/* ++ * ipmi_recv_sol ++ * ++ * Receive a SOL packet and send an ACK in response. ++ * ++ */ ++struct ipmi_rs * ++ipmi_lan_recv_sol(struct ipmi_intf * intf) ++{ ++ struct ipmi_rs * rsp = ipmi_lan_poll_recv(intf); ++ ++ ack_sol_packet(intf, rsp); ++ ++ /* ++ * Remembers the data sent, and alters the data to just ++ * include the new stuff. ++ */ ++ check_sol_packet_for_new_data(intf, rsp); ++ ++ return rsp; ++} ++ + /* send a get device id command to keep session active */ + static int + ipmi_lan_keepalive(struct ipmi_intf * intf) +@@ -1411,6 +1905,8 @@ + + intf->abort = 1; + ++ intf->session->sol_data.sequence_number = 1; ++ + /* open port to BMC */ + memset(&s->addr, 0, sizeof(struct sockaddr_in)); + s->addr.sin_family = AF_INET; diff --git a/debian/rules b/debian/rules index 582b3c1..5d96d9c 100755 --- a/debian/rules +++ b/debian/rules @@ -1,7 +1,6 @@ #!/usr/bin/make -f #export DH_VERBOSE=1 -export DH_COMPAT=4 export DH_OPTIONS CFLAGS = -Wall -g @@ -28,8 +27,8 @@ build: build-arch build-indep build-arch: build-arch-stamp build-arch-stamp: configure-stamp - -# Add here commands to compile the arch part of the package. + + # Add here commands to compile the arch part of the package. $(MAKE) touch build-arch-stamp @@ -37,17 +36,17 @@ build-indep: build-indep-stamp build-indep-stamp: configure-stamp touch build-indep-stamp -# Add here commands to compile the indep part of the package. -#$(MAKE) doc + # Add here commands to compile the indep part of the package. + #$(MAKE) doc clean: unpatch dh_testdir dh_testroot rm -f build-arch-stamp build-indep-stamp configure-stamp - -# Add here commands to clean up after the build process. - -$(MAKE) distclean - + + # Add here commands to clean up after the build process. + if [ -f Makefile ]; then $(MAKE) distclean; fi + dh_clean install: install-arch #install-indep @@ -57,34 +56,33 @@ install-indep: dh_clean -k -i dh_installdirs -i -# Add here commands to install the indep part of the package into -# debian/-doc. -#INSTALLDOC# -# $(MAKE) install-doc DESTDIR=$(CURDIR)/debian/tmp/ipmitool-doc -# dh_movefiles -i + # Add here commands to install the indep part of the package into + # debian/-doc. + #INSTALLDOC# + # $(MAKE) install-doc DESTDIR=$(CURDIR)/debian/tmp/ipmitool-doc + # dh_movefiles -i install-arch: dh_testdir dh_testroot dh_clean -k -a dh_installdirs -a - -# Add here commands to install the arch part of the package into -# debian/tmp. + + # Add here commands to install the arch part of the package into + # debian/tmp. $(MAKE) install DESTDIR=$(CURDIR)/debian/ipmitool - + # No need to have two copies of the license text in the package. $(RM) $(CURDIR)/debian/ipmitool/usr/share/doc/ipmitool/COPYING - + # Move upstream changelog to correct filename. - mv $(CURDIR)/debian/ipmitool/usr/share/doc/ipmitool/ChangeLog \ - $(CURDIR)/debian/ipmitool/usr/share/doc/ipmitool/changelog + #mv $(CURDIR)/debian/ipmitool/usr/share/doc/ipmitool/ChangeLog \ + # $(CURDIR)/debian/ipmitool/usr/share/doc/ipmitool/changelog # Compress to avoid lintian warning. Not sure why dh_compress # isn't fixing this. - gzip -9 $(CURDIR)/debian/ipmitool/usr/share/doc/ipmitool/changelog + #gzip -9 $(CURDIR)/debian/ipmitool/usr/share/doc/ipmitool/changelog -# dh_movefiles -a # Must not depend on anything. This is to be called by # binary-arch/binary-multi # in another 'make' thread. @@ -92,7 +90,7 @@ binary-common: dh_testdir dh_testroot dh_installdocs - dh_installchangelogs + dh_installchangelogs ChangeLog dh_installinit --name ipmievd --error-handler=ipmievd_initd_failed dh_link dh_strip diff --git a/debian/watch b/debian/watch new file mode 100644 index 0000000..d6990ab --- /dev/null +++ b/debian/watch @@ -0,0 +1,3 @@ +version=3 +opts=uversionmangle=s/\.(tar.*|tgz|zip|gz|bz2)$// \ +http://sf.net/ipmitool/ipmitool-?_?([\d+\.]+|\d+)\.(tar.*|tgz|zip|gz|bz2) debian uupdate -- cgit v1.2.3