From b32d92e890caac903491116e9d817aa780c0323b Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?J=C3=B6rg=20Frings-F=C3=BCrst?= Date: Wed, 23 Jul 2014 15:03:00 +0200 Subject: Imported Upstream version 1.8.14 --- control/Makefile.am | 37 ++++ control/Makefile.in | 438 +++++++++++++++++++++++++++++++++++++++++++++++ control/ipmitool.spec.in | 404 +++++++++++++++++++++++++++++++++++++++++++ control/pkginfo.in | 10 ++ control/prototype.in | 12 ++ control/rpmmacros.in | 12 ++ control/rpmrc | 8 + 7 files changed, 921 insertions(+) create mode 100644 control/Makefile.am create mode 100644 control/Makefile.in create mode 100644 control/ipmitool.spec.in create mode 100644 control/pkginfo.in create mode 100644 control/prototype.in create mode 100644 control/rpmmacros.in create mode 100644 control/rpmrc (limited to 'control') diff --git a/control/Makefile.am b/control/Makefile.am new file mode 100644 index 0000000..91950d6 --- /dev/null +++ b/control/Makefile.am @@ -0,0 +1,37 @@ +# Copyright (c) 2003 Sun Microsystems, Inc. All Rights Reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# Redistribution of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# Redistribution in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in the +# documentation and/or other materials provided with the distribution. +# +# Neither the name of Sun Microsystems, Inc. or the names of +# contributors may be used to endorse or promote products derived +# from this software without specific prior written permission. +# +# This software is provided "AS IS," without a warranty of any kind. +# ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, +# INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A +# PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY EXCLUDED. +# SUN MICROSYSTEMS, INC. ("SUN") AND ITS LICENSORS SHALL NOT BE LIABLE +# FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING +# OR DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES. IN NO EVENT WILL +# SUN OR ITS LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA, +# OR FOR DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR +# PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF +# LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE, +# EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. + +MAINTAINERCLEANFILES = Makefile.in + +EXTRA_DIST = pkginfo.in prototype.in \ + ipmitool.spec.in rpmmacros.in rpmrc + +dist-hook: pkginfo prototype rpmmacros + diff --git a/control/Makefile.in b/control/Makefile.in new file mode 100644 index 0000000..c549e50 --- /dev/null +++ b/control/Makefile.in @@ -0,0 +1,438 @@ +# Makefile.in generated by automake 1.11.3 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software +# Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +# Copyright (c) 2003 Sun Microsystems, Inc. All Rights Reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# Redistribution of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# Redistribution in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in the +# documentation and/or other materials provided with the distribution. +# +# Neither the name of Sun Microsystems, Inc. or the names of +# contributors may be used to endorse or promote products derived +# from this software without specific prior written permission. +# +# This software is provided "AS IS," without a warranty of any kind. +# ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, +# INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A +# PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY EXCLUDED. +# SUN MICROSYSTEMS, INC. ("SUN") AND ITS LICENSORS SHALL NOT BE LIABLE +# FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING +# OR DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES. IN NO EVENT WILL +# SUN OR ITS LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA, +# OR FOR DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR +# PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF +# LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE, +# EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. +VPATH = @srcdir@ +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +target_triplet = @target@ +subdir = control +DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ + $(srcdir)/ipmitool.spec.in $(srcdir)/pkginfo.in \ + $(srcdir)/prototype.in $(srcdir)/rpmmacros.in +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/configure.in +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = $(top_builddir)/config.h +CONFIG_CLEAN_FILES = pkginfo prototype rpmmacros ipmitool.spec +CONFIG_CLEAN_VPATH_FILES = +SOURCES = +DIST_SOURCES = +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AR = @AR@ +ARCH = @ARCH@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +BASEDIR = @BASEDIR@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DISTRO = @DISTRO@ +DLLTOOL = @DLLTOOL@ +DSYMUTIL = @DSYMUTIL@ +DUMPBIN = @DUMPBIN@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +FGREP = @FGREP@ +GREP = @GREP@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +INTF_BMC = @INTF_BMC@ +INTF_BMC_LIB = @INTF_BMC_LIB@ +INTF_DUMMY = @INTF_DUMMY@ +INTF_DUMMY_LIB = @INTF_DUMMY_LIB@ +INTF_FREE = @INTF_FREE@ +INTF_FREE_LIB = @INTF_FREE_LIB@ +INTF_IMB = @INTF_IMB@ +INTF_IMB_LIB = @INTF_IMB_LIB@ +INTF_LAN = @INTF_LAN@ +INTF_LANPLUS = @INTF_LANPLUS@ +INTF_LANPLUS_LIB = @INTF_LANPLUS_LIB@ +INTF_LAN_LIB = @INTF_LAN_LIB@ +INTF_LIPMI = @INTF_LIPMI@ +INTF_LIPMI_LIB = @INTF_LIPMI_LIB@ +INTF_OPEN = @INTF_OPEN@ +INTF_OPEN_LIB = @INTF_OPEN_LIB@ +INTF_SERIAL = @INTF_SERIAL@ +INTF_SERIAL_LIB = @INTF_SERIAL_LIB@ +IPMITOOL_INTF_LIB = @IPMITOOL_INTF_LIB@ +LD = @LD@ +LDFLAGS = @LDFLAGS@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ +LN_S = @LN_S@ +LTLIBOBJS = @LTLIBOBJS@ +MAKEINFO = @MAKEINFO@ +MANIFEST_TOOL = @MANIFEST_TOOL@ +MKDIR_P = @MKDIR_P@ +NM = @NM@ +NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ +OS = @OS@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +POW_LIB = @POW_LIB@ +PSTAMP = @PSTAMP@ +RANLIB = @RANLIB@ +RPMBUILD = @RPMBUILD@ +RPM_RELEASE = @RPM_RELEASE@ +SED = @SED@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +VERSION = @VERSION@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_configure_args = @ac_configure_args@ +ac_ct_AR = @ac_ct_AR@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target = @target@ +target_alias = @target_alias@ +target_cpu = @target_cpu@ +target_os = @target_os@ +target_vendor = @target_vendor@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +MAINTAINERCLEANFILES = Makefile.in +EXTRA_DIST = pkginfo.in prototype.in \ + ipmitool.spec.in rpmmacros.in rpmrc + +all: all-am + +.SUFFIXES: +$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign control/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --foreign control/Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): +pkginfo: $(top_builddir)/config.status $(srcdir)/pkginfo.in + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ +prototype: $(top_builddir)/config.status $(srcdir)/prototype.in + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ +rpmmacros: $(top_builddir)/config.status $(srcdir)/rpmmacros.in + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ +ipmitool.spec: $(top_builddir)/config.status $(srcdir)/ipmitool.spec.in + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs +tags: TAGS +TAGS: + +ctags: CTAGS +CTAGS: + + +distdir: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$(top_distdir)" distdir="$(distdir)" \ + dist-hook +check-am: all-am +check: check-am +all-am: Makefile +installdirs: +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." + -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) +clean: clean-am + +clean-am: clean-generic clean-libtool mostlyclean-am + +distclean: distclean-am + -rm -f Makefile +distclean-am: clean-am distclean-generic + +dvi: dvi-am + +dvi-am: + +html: html-am + +html-am: + +info: info-am + +info-am: + +install-data-am: + +install-dvi: install-dvi-am + +install-dvi-am: + +install-exec-am: + +install-html: install-html-am + +install-html-am: + +install-info: install-info-am + +install-info-am: + +install-man: + +install-pdf: install-pdf-am + +install-pdf-am: + +install-ps: install-ps-am + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-generic mostlyclean-libtool + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: + +.MAKE: install-am install-strip + +.PHONY: all all-am check check-am clean clean-generic clean-libtool \ + dist-hook distclean distclean-generic distclean-libtool \ + distdir dvi dvi-am html html-am info info-am install \ + install-am install-data install-data-am install-dvi \ + install-dvi-am install-exec install-exec-am install-html \ + install-html-am install-info install-info-am install-man \ + install-pdf install-pdf-am install-ps install-ps-am \ + install-strip installcheck installcheck-am installdirs \ + maintainer-clean maintainer-clean-generic mostlyclean \ + mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ + uninstall uninstall-am + + +dist-hook: pkginfo prototype rpmmacros + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/control/ipmitool.spec.in b/control/ipmitool.spec.in new file mode 100644 index 0000000..85e61f9 --- /dev/null +++ b/control/ipmitool.spec.in @@ -0,0 +1,404 @@ +Name: ipmitool +Summary: ipmitool - Utility for IPMI control +Version: @VERSION@ +Release: @RPM_RELEASE@%{?_distro:.%{_distro}} +License: BSD +Group: Utilities +Packager: Jim Mankovich +Source: %{name}-%{version}.tar.gz +Buildroot: /var/tmp/ipmitool-root + +%description +This package contains a utility for interfacing with devices that support +the Intelligent Platform Management Interface specification. IPMI is +an open standard for machine health, inventory, and remote power control. + +This utility can communicate with IPMI-enabled devices through either a +kernel driver such as OpenIPMI or over the RMCP LAN protocol defined in +the IPMI specification. IPMIv2 adds support for encrypted LAN +communications and remote Serial-over-LAN functionality. + +It provides commands for reading the Sensor Data Repository (SDR) and +displaying sensor values, displaying the contents of the System Event +Log (SEL), printing Field Replaceable Unit (FRU) information, reading and +setting LAN configuration, and chassis power control. + +%prep +if [ "$RPM_BUILD_ROOT" ] && [ "$RPM_BUILD_ROOT" != "/" ]; then + rm -rf $RPM_BUILD_ROOT +fi + +%setup + +%build +./configure --with-kerneldir \ + --with-rpm-distro=@DISTRO@ \ + --prefix=%{_prefix} \ + --bindir=%{_bindir} \ + --sbindir=%{_sbindir} \ + --datadir=%{_datadir} \ + --includedir=%{_includedir} \ + --libdir=%{_libdir} \ + --mandir=%{_mandir} \ + --sysconfdir=%{_sysconfdir} +make + +%install +make DESTDIR=$RPM_BUILD_ROOT install-strip + +%clean +if [ "$RPM_BUILD_ROOT" ] && [ "$RPM_BUILD_ROOT" != "/" ]; then + rm -rf $RPM_BUILD_ROOT +fi + +%files +%defattr(755,root,root) +%attr(755,root,root) %{_bindir}/* +%attr(755,root,root) %{_sbindir}/* +%{_datadir}/ipmitool/* +%{_mandir}/man*/* +%doc %{_datadir}/doc/ipmitool + + +%changelog +* Wed Feb 25 2009 1.8.11-1 +- Fix new GCC compilation issues in regards to Packing +- Fix Tracker bug #1642710 - ipmi_kcs_drv being loaded/unloaded + for 2.4 kernel instead of ipmi_si_drv driver module +- New -y option added to allow specification of kg keys with + non-printable characters +- New -K option added to allow kgkey settings via environmental + variable IPMI_KGKEY +- Generic device support added for EEPROM with SDR Type 10h (gendev) +- Fix to lan-bridging for a double-bridging crash and to fix + an issue with bridging multiple concurrent requests and + erroneous handling of raw Send Message +- Lanplus fix for commands like 'sensor list' without the -t option + causing wrong double bridged requests of a sensor is located + on another satellite controller +- Fix lan and lanplus request list entry removal bugs +- Fix non-working issue when trying to send a bridge message with + Cipher 3 +- Change bridge message handling to reuse command ipmi_lan_poll_recv +- Added PICMG 2.0 and 2.3 support +- Fix PICMG (ATCA) extension verification and reversal of BCD encoded + values for "major" and "minor" fields +- Add IANA support for Pigeon Point +- Add OEM SW/FW Record identification +- Fix to include I2C and LUN addresses so sensors are correctly managed +- Patch ID 1990560 to get readings from non-linear analog sensors +- Add support for SOL payload status command +- SOL set parameter range checking added +- Fixed SOL activate options usage +- Fixed crashes when parsing 'sol payload' and 'tsol' cmds (#216967) +- Added retries to SOL keepalive +- Fixed wrong mask values for Front Panel disable/enable status +- Add support to access fru internal use area +- Add support for new PICMG 3.0 R3.0 (March 24, 2008) to allow + blocks of data within the FRU storage area to be write protected. +- Fix node reporting in GUID; Tracker bug #2339675 +- Fix watchdog use/action print strings +- Fix endian bug in SDR add from file; Tracker bug #2075258 +- Fix crash when dumping SDRs in a file and there's an error + getting an SDR; improve algorithm for optimal packet size +- Fix occasional SDR dump segfault; #1793076 +- Allow ipmitool sel delete to accept hex list entry numbers +- Fix SEL total space reporting. +- Fix for garbage sensor threshold values reported when none + returned. Tracker Bug #863748 +- ipmievd change to Monitor %used in SEL buffer and log warnings when + the buffer is 80% and 100% full + +* Fri Aug 08 2008 1.8.10-1 + - Added support for BULL IANA number. + - Fixed contrib build so the oem_ibm_sel_map file gets included in rpm + builds again. + - Added support for Debian packages to be built from CVS + - Fix for sdr and sel timestamp reporting issues + - Fix for discrete sensor state print routines to address state bits 8-14 + - Change ipmi_chassis_status() to non-static so it can be used externally + - Added retries to SOL keepalive + - Fix to stop sensor list command from reporting a failure due to missing + sensor + - Fix bug in sdr free space reporting + - Add support for IANA number to vendor name conversion for many vendors + - Fix segfault bug in lan set command + - Fix bug in population of raw i2c wdata buffer + - Fix bug in ipmb sensor reading + - Fix misspellings, typos, incorrect strncmp lengths, white space + - Update/fix printed help and usages for many commands + - Add and update support for all commands in ipmitool man page + - Fix for lanplus session re-open when the target becomes unavailable following + a fw upgrade activation + - Add support for watchdog timer shutoff, reset, and get info + - Add support for more ibm systems in oem_ibm_sel_map + - Add more JEDEC support info for DIMMs; decrease request size for DIMM FRU + info to 16 bytes at a time to allow more DIMM FRUs to respond. + - Fix to change hpmfwupg to version 1.02; fix to reduce hpmfwupg buffer + length more aggressively when no response from iol + - Fix HPM firmware activation via IOL; fake a timeout after IOL session + re-open to force get upgrade status retry; Added retries on 0xD3 + completion code + - Add support for freeipmi 0.6.0; adjust autoconf for changes + - Fix for oemval2str size + - Add support for product name resolution in mc info + - Fix FRU display format + - Added PICMG ekeying analyzer module support (ekanalyzer); display point + to point physical connectivity and power supply information between + carriers and AMC modules; display matched results of ekeying match + between an on-carrier device and AMC module or between 2 AMC modules + - Fix AMC GUID display support + - Improved amcportstate operations + - Added resolution for new sensor types + - Fix segfault in SOL + - Fix bug that caused infinite loop on BMCs with empty SDRs + - Fix to move out Kontron OEM sensor resolution for other OEMs which could + lead to bad event descriptions + - Add new FRU edit mode thereby allowing serial numbers, etc. to be changed; + improvements to OEM edit mode + - Added SPD support for parms: channel number, max read size + - Add SDR support for adding SDR records from a dumped file, clearing SDR, + adding partial SDR records + - Add updates and fixes to hpmfwupg: upload block size to 32 bytes for KCS, + handle long response option, implement rollback override, garbage output fix + - Add double bridge lan support , fix bridging issue + - Add HPM support to pre-check which components need to be skipped + - Fix autodetection of maximum packet size when using IPMB + - Add new Kontron OEM command to set the BIOS boot option sequence + - Add support for dual-bridge/ dual send message + - Add auto-detect for local IPMB address using PICMG 2.X extension + - Add support for HPM.1 1.0 specification compliance + - Fix for improper lan/lanplus addressing + - Added transit_channel and transit_addr to ipmi_intf struct + - Fix bad password assertion bug due to rakp2 HMAC not being checked properly + - Added ability to interpret PPS shelf manager clia sel dump + - Corrected PICMG M7 state event definition macros + - Added FRU parsing enhancements + - Added "isol info", "isol set" and "isol activate" commands to support + Intel IPMI v1.5 SOL functionality. Removed "isol setup" command. + - Fix bug in ipmi_lan_recv_packet() in lan and lanplus interfaces. + - Fix bug in "chassis poh" command. + - Fix HPM.1 upgrade to apply to only given component when instructed to do so + - Added configure auto-detection if dual bridge extension is supported + by OpenIPMI + +* Tue Mar 6 2007 1.8.9-1 + - Added initial AMC ekey query operation support + - Improvements to ekeying support (PICMG 3.x only) + - Added initial interactive edition support for multirec; added IANA + verification before interpreting PICMG records. + - Added edit support for AMC activation "Maximum Internal Current" + - Fix bug generating garbage on the screen when handling GetDeviceId + and sol traffic occurs + - Added ability to map OEM sensor types to OEM description string using + IANA number; moved IANA number table + - Fix lan set access command to use value already saved within parameters + for PEF and authentication + - Fix bug in cmd ipmitool lan stats get 1 + - Add support to allow ipmitool/ipmievd to target specific device nodes + on multi-BMC systems + - Add support for name+privilege lookup for lanplus sessions + - Fix time_t conversion bug for 64-bit OS + - Added prefix of hostname on sel ipmievd sessions + - Fixed FWUM Get Info + - Fix ipmievd fd closing bug + - Add set-in-progress flag support to chassis bootdev + - Added new chassis bootdev options + - Add sol payload enable/disable comman + - Fix SOL set errors when commit-write not supported + - Fix reset of session timeout for lanplus interface + - Fixed lan interface accessibility timeout handling + - Fix bug with Function Get Channel Cipher Suites command when more + than 1 page used. + - Fix missing firmware firewall top-level command + - Fix bug in SOL keepalive functionality + - Fix SOLv2 NACK and retry handling for Intel ESB2 BMC + - Added ipmi_sel_get_oem_sensor* APIs + - Added HPM.1 support + - Fix segfault when incorrect oem option supplied + - Fix bus problem with spd command + - Fix segfault in SOL when remote BMC does not return packet + - Adjust packet length for AMC.0 retricting IPMB packets to 32 bytes + - Added lan packet size reduction mechanism + - Fix bug with sendMessage of bad length with different target + - Fix for big endian (PPC) architecture + - NetBSD fixes + - Fix segfault and channel problem with user priv command + - Add support for bus/chan on i2c raw command + - Add freeipmi interface support + - Add remote spd printing + - Add better detection of linux/compiler.h to config + - Makefile changes to fix makedistcheck, etc. + +* Tue May 02 2006 1.8.8-1 + - Fix segfaults in sensor data repository list + - Fix ipmievd to open interface before daemonizing + - Fix IPMIv1.5 authtype NONE to ignore supplied password + - Fix cipher suite display bug in lan print + - Fix typo in IPMIv2 SOL output when sending break + - Fix improper LUN handling with Tyan SOL + - Add LUN support to OpenIPMI interface + - Add support for Kontron OEM commands + - Update to Kontron Firmware Update command + +* Sun Mar 19 2006 1.8.7-1 + - Add Sun OEM command for blades + - Increase argument size for raw commands in shell/exec + - Fix handling of LUNs for LAN interfaces + - Add IPMIv2 SOL loopback test + - Add support for IBM OEM SEL messages + - Disable file paranoia checks on read files by default + - Support IPMIv2 SOL on older Intel boxes + - Display message and exit if keepalive fails during SOL + - Add support for setting VLAN id and priority + - Add support for FreeBSD OpenIPMI-compatible driver + - Add support for IPMIv2 Firmware Firewall + - Fix gcc4 compile warnings + - Make ipmievd generate pidfile + - Add initscripts for ipmievd + +* Mon Jan 17 2006 1.8.6-1 + - Fix memory corruption when sending encrypted SOL traffic + - Add keepalive timer to IPMIv2 SOL sessions + +* Sat Jan 14 2006 1.8.5-1 + - Raise privilege level after creating IPMIv2 session + - Add support for settable SOL escape character with -e option + - Add support for Kg BMC key for IPMIv2 authentication with -k option + - Add support for Tyan IPMIv1.5 SOL with tsol command + - Add support for PICMG devices + - Add support for OEM SEL event parsing + - Add support for command bridging over lan and lanplus interfaces + - New 'chassis selftest' command + - Many bufxies and patches from contributors + +* Wed May 18 2005 1.8.2-1 + - Fix FRU reading for large (>255 bytes) areas. + - Overhaul to ipmievd to support SEL polling in addition to OpenIPMI. + - Fix LAN parameter segfault when no Ciphers supported by BMC. + - Fix IPMIv2 support on Intel v2 BMCs (use -o intelplus). + - Separate option parsing code from main ipmitool source file. + - Add raw I2C support with IPMI Master Read-Write command. + - Add support for new 'sdr elist' extended output format. + - Add support for listing sensors by type with 'sdr type' command. + - Add support for new 'sel elist' extended output format that + cross-references events with sensors. + - Add support for sending dynamically generated platform events + based on existing sensor information. + - New '-S' argument to read local SDR cache created with 'sdr dump'. + - Updated manpage for ipmitool and ipmievd. + +* Wed Apr 06 2005 1.8.1-1 + - Install ipmievd into /usr/sbin + +* Wed Mar 16 2005 1.8.0-1 + - Fix IPMIv2.0 issues + - Fix chassis boot parameter support + - Add support for linear sensors + - Update bmc plugin to work with new Solaris bmc driver (new ioctl + for interface detection and new STREAMS message-based interface) + +* Tue Jan 18 2005 1.7.0-1 + - Propogate errors correctly so exit status will be useful + - More consistent display of errors including completion code text + - Errors and debug is send to stderr now + - New "sel get" command that will print details about SEL entry + and corresponding SDR records as well as FRUs via entity association + - Improved event generator, now supports reading events from text file + - New "-o oemtype" option for specifying OEM boards + exsting types are "supermicro" and "intelwv2" + - New PEF subsystem from Tim Murphy at Dell + - New "bmc" plugin for Solaris 10 x86 + - Many bugfixes and contributed patches + - Support for Supermicro BMC OEM authentication method + - Fix minor problem with LAN parameter setting + +* Wed Aug 18 2004 1.6.0-1 + - Add a README + - Add support for IPMIv2 and Serial-over-LAN from Newisys + - Add Solaris x86 lipmi interface + - Add support for building Solaris packages + - Add support for building RPMs as non-root user + - Fix segfault when doing "sel list" (from Matthew Braithwaite) + - Fix "chassis identify" on some BMCs (from ebrower@sourceforge) + - Add "bmc info" and related output (from ebrower@sourceforge) + - new "shell" and "exec" commands + - lots of other contributed patches + +* Sat May 27 2004 1.5.9-1 + - Add ability to get a particular sensor by name + - Add ability to set a particular sensor threshold + - Add support for displaying V2 channel authentication levels + - Add README for rrdtool scripts in contrib directory + - Improve lan interface retry handling + - Support prompting for password or reading from environment + - Move chaninfo command into channel subcommand + - Fix reservation ID handling when two sessions open to BMC + - Fix reading of large FRU data + - Add configure option for changing binary to ipmiadm for Solaris + - Fix compile problem on Solaris 8 + +* Tue Jan 27 2004 1.5.8-1 + - Enable static compilation of interfaces + - Fix types to be 64-bit safe + - Fix compilation problems on Solaris + - Fix multiple big-endian problems for Solaris/SPARC + - Fix channel access to save settings to NVRAM + - Set channel privilege limit to ADMIN during "access on" + - Enable gratuitous ARP in bmcautoconf.sh + - Add support for Linux kernel panic messages in SEL output + - Add support for type 3 SDR records + +* Mon Jan 5 2004 1.5.7-1 + - add IPMIv1.5 eratta fixes + - additions to FRU printing and FRU multirecords + - better handling of SDR printing + - contrib scripts for creating rrdtool graphs + +* Thu Dec 4 2003 1.5.6-1 + - Fix SEL event decoding for generic events + - Handle empty SEL gracefully when doing "sel list" + - Fix sdr handling of sensors that do not return a reading + - Fix for CSV display of sensor readings/units from Fredrik Öhrn + +* Tue Nov 25 2003 1.5.5-1 + - Add -U option for setting LAN username + - Fix -v usage for plugin interfaces + +* Fri Nov 14 2003 1.5.4-1 + - pull interface plugin api into library + - fix ipmievd + +* Fri Oct 31 2003 1.5.3-1 + - add -g optin for pedantic ipmi-over-lan communication + +* Fri Oct 24 2003 1.5.2-1 + - add gratuitous arp interval setting + +* Wed Oct 8 2003 1.5.1-1 + - better SEL support + - fix display bug in SDR list + +* Fri Sep 5 2003 1.5.0-1 + - use automake/autoconf/libtool + - dynamic loading interface plugins + +* Wed May 28 2003 1.4.0-1 + - make UDP packet handling more robust + - fix imb driver support + +* Thu May 22 2003 1.3-1 + - update manpage + - rework of low-level network handling + - add basic imb driver support + +* Wed Apr 2 2003 1.2-1 + - change command line option parsing + - support for more chassis commands + +* Tue Apr 1 2003 1.1-1 + - minor fixes. + +* Sun Mar 30 2003 1.0-1 + - Initial release. + diff --git a/control/pkginfo.in b/control/pkginfo.in new file mode 100644 index 0000000..3a86616 --- /dev/null +++ b/control/pkginfo.in @@ -0,0 +1,10 @@ +PKG="@PACKAGE@" +NAME="@PACKAGE@ - Utility for Intelligent Platform Management Interface (IPMI) control" +ARCH="@ARCH@" +VERSION="@VERSION@" +CATEGORY="system" +VENDOR="Duncan Laurie" +EMAIL="duncan@iceblink.org" +PSTAMP="@PSTAMP@" +BASEDIR="@BASEDIR@" +CLASSES="none" diff --git a/control/prototype.in b/control/prototype.in new file mode 100644 index 0000000..cfaf436 --- /dev/null +++ b/control/prototype.in @@ -0,0 +1,12 @@ +i pkginfo +d none bin ? ? ? +f none bin/@PACKAGE@=../src/@PACKAGE@ 0755 root bin +d none sbin ? ? ? +f none sbin/ipmievd=../src/ipmievd 0755 root bin +d none share ? ? ? +d none share/man ? ? ? +d none share/man/man1 ? ? ? +f none share/man/man1/@PACKAGE@.1=../doc/@PACKAGE@.1 0644 root bin +d none share/man/man8 ? ? ? +f none share/man/man8/ipmievd.8=../doc/ipmievd.8 0644 root bin + diff --git a/control/rpmmacros.in b/control/rpmmacros.in new file mode 100644 index 0000000..429e098 --- /dev/null +++ b/control/rpmmacros.in @@ -0,0 +1,12 @@ +%_topdir %(echo $BUILDDIR) +%_sourcedir %{_topdir}/.. +%_specdir %{_sourcedir} +%_tmppath %{_topdir}/tmp +%_builddir %{_topdir}/BUILD +%_buildroot %{_topdir}/%{_tmppath}/%{name}-%{version}-root +%_rpmdir %{_topdir}/RPMS +%_srcrpmdir %{_topdir}/SRPMS +%_distro @DISTRO@ +%_rpmfilename %%{NAME}-%%{VERSION}-%%{RELEASE}.%%{ARCH}.rpm +%packager jmank@hp.com +%distribution Sourceforge Build diff --git a/control/rpmrc b/control/rpmrc new file mode 100644 index 0000000..0a99ecb --- /dev/null +++ b/control/rpmrc @@ -0,0 +1,8 @@ +macrofiles: /usr/lib/rpm/macros:/usr/lib/rpm/%{_target}/macros:/etc/rpm/macros.specspo:/etc/rpm/macros:/etc/rpm/%{_target}/macros:%(echo $CONFIGDIR)/rpmmacros + +buildarchtranslate: athlon: i386 +buildarchtranslate: i686: i386 +buildarchtranslate: i586: i386 +buildarchtranslate: i486: i386 +buildarchtranslate: i386: i386 + -- cgit v1.2.3