From c046fdc3b05cb15bc8e599dd9c8604a847c84707 Mon Sep 17 00:00:00 2001 From: Matthew Johnson Date: Sun, 22 Mar 2009 16:45:03 +0000 Subject: switch to quilt --- debian/patches/20_ipmi_impi.dpatch | 340 ------------------------------------- 1 file changed, 340 deletions(-) delete mode 100644 debian/patches/20_ipmi_impi.dpatch (limited to 'debian/patches/20_ipmi_impi.dpatch') diff --git a/debian/patches/20_ipmi_impi.dpatch b/debian/patches/20_ipmi_impi.dpatch deleted file mode 100644 index d966a1d..0000000 --- a/debian/patches/20_ipmi_impi.dpatch +++ /dev/null @@ -1,340 +0,0 @@ -#! /bin/sh /usr/share/dpatch/dpatch-run -## 20ipmi_impi.dpatch by -## -## All lines beginning with `## DP:' are a description of the patch. -## DP: 20ipmi_impi, closes #412816 - -@DPATCH@ - ---- ipmitool-1.8.9-rc1/lib/ipmi_strings.c.orig 2005-05-15 06:26:33.000000000 +0200 -+++ ipmitool-1.8.9-rc1/lib/ipmi_strings.c 2005-10-23 15:22:57.000000000 +0200 -@@ -43,7 +43,7 @@ - /* - * From table 26-4 of the IPMI v2 specification - */ --const struct valstr impi_bit_rate_vals[] = { -+const struct valstr ipmi_bit_rate_vals[] = { - { 0x00, "IPMI-Over-Serial-Setting"}, /* Using the value in the IPMI Over Serial Config */ - { 0x06, "9.6" }, - { 0x07, "19.2" }, ---- ipmitool-1.8.9-rc1/lib/ipmi_sol.c.orig 2006-08-02 19:17:10.000000000 +0200 -+++ ipmitool-1.8.9-rc1/lib/ipmi_sol.c 2006-08-25 16:01:54.000000000 +0200 -@@ -108,7 +108,7 @@ - - memset(&req, 0, sizeof(req)); - req.msg.netfn = IPMI_NETFN_TRANSPORT; -- req.msg.cmd = IMPI_GET_SOL_CONFIG_PARAMETERS; -+ req.msg.cmd = IPMI_GET_SOL_CONFIG_PARAMETERS; - req.msg.data_len = 4; - req.msg.data = data; - -@@ -485,10 +485,10 @@ - printf("%d,", params.retry_interval * 10); - - printf("%s,", -- val2str(params.volatile_bit_rate, impi_bit_rate_vals)); -+ val2str(params.volatile_bit_rate, ipmi_bit_rate_vals)); - - printf("%s,", -- val2str(params.non_volatile_bit_rate, impi_bit_rate_vals)); -+ val2str(params.non_volatile_bit_rate, ipmi_bit_rate_vals)); - - printf("%d,", params.payload_channel); - printf("%d\n", params.payload_port); -@@ -516,10 +516,10 @@ - params.retry_interval * 10); - - printf("Volatile Bit Rate (kbps) : %s\n", -- val2str(params.volatile_bit_rate, impi_bit_rate_vals)); -+ val2str(params.volatile_bit_rate, ipmi_bit_rate_vals)); - - printf("Non-Volatile Bit Rate (kbps) : %s\n", -- val2str(params.non_volatile_bit_rate, impi_bit_rate_vals)); -+ val2str(params.non_volatile_bit_rate, ipmi_bit_rate_vals)); - - printf("Payload Channel : %d (0x%02x)\n", - params.payload_channel, params.payload_channel); -@@ -554,7 +554,7 @@ - - memset(&req, 0, sizeof(req)); - req.msg.netfn = IPMI_NETFN_TRANSPORT; /* 0x0c */ -- req.msg.cmd = IMPI_SET_SOL_CONFIG_PARAMETERS; /* 0x21 */ -+ req.msg.cmd = IPMI_SET_SOL_CONFIG_PARAMETERS; /* 0x21 */ - req.msg.data = data; - - data[0] = channel; -@@ -1105,7 +1105,7 @@ - - - /* -- * impi_sol_deactivate -+ * ipmi_sol_deactivate - */ - static int - ipmi_sol_deactivate(struct ipmi_intf * intf) -@@ -1451,7 +1451,7 @@ - - - /* -- * impi_sol_activate -+ * ipmi_sol_activate - */ - static int - ipmi_sol_activate(struct ipmi_intf * intf, int looptest, int interval) ---- ipmitool-1.8.9-rc1/include/ipmitool/ipmi_intf.h.orig 2005-04-21 01:03:57.000000000 +0200 -+++ ipmitool-1.8.9-rc1/include/ipmitool/ipmi_intf.h 2005-10-23 16:07:56.000000000 +0200 -@@ -96,7 +96,7 @@ - socklen_t addrlen; - - /* -- * This struct holds state data specific to IMPI v2 / RMCP+ sessions -+ * This struct holds state data specific to IPMI v2 / RMCP+ sessions - */ - struct { - enum LANPLUS_SESSION_STATE session_state; ---- ipmitool-1.8.9-rc1/include/ipmitool/ipmi_user.h.orig 2005-01-07 03:05:45.000000000 +0100 -+++ ipmitool-1.8.9-rc1/include/ipmitool/ipmi_user.h 2005-10-23 16:08:25.000000000 +0200 -@@ -44,7 +44,7 @@ - - - /* -- * The GET USER ACCESS response from table 22-32 of the IMPI v2.0 spec -+ * The GET USER ACCESS response from table 22-32 of the IPMI v2.0 spec - */ - struct user_access_rsp { - #if WORDS_BIGENDIAN ---- ipmitool-1.8.9-rc1/include/ipmitool/ipmi_strings.h.orig 2005-05-11 07:46:40.000000000 +0200 -+++ ipmitool-1.8.9-rc1/include/ipmitool/ipmi_strings.h 2005-10-23 15:22:19.000000000 +0200 -@@ -45,7 +45,7 @@ - - extern const struct valstr ipmi_channel_activity_type_vals[]; - extern const struct valstr ipmi_privlvl_vals[]; --extern const struct valstr impi_bit_rate_vals[]; -+extern const struct valstr ipmi_bit_rate_vals[]; - extern const struct valstr ipmi_set_in_progress_vals[]; - extern const struct valstr ipmi_authtype_session_vals[]; - extern const struct valstr ipmi_authtype_vals[]; ---- ipmitool-1.8.9-rc1/include/ipmitool/ipmi_constants.h.orig 2005-05-11 07:46:40.000000000 +0200 -+++ ipmitool-1.8.9-rc1/include/ipmitool/ipmi_constants.h 2005-10-23 16:08:13.000000000 +0200 -@@ -42,9 +42,9 @@ - * COMMANDS - */ - #define IPMI_GET_SDR_REPOSITORY_INFO 0x20 --#define IMPI_SOL_ACTIVATING 0x20 --#define IMPI_SET_SOL_CONFIG_PARAMETERS 0x21 --#define IMPI_GET_SOL_CONFIG_PARAMETERS 0x22 -+#define IPMI_SOL_ACTIVATING 0x20 -+#define IPMI_SET_SOL_CONFIG_PARAMETERS 0x21 -+#define IPMI_GET_SOL_CONFIG_PARAMETERS 0x22 - #define IPMI_SET_USER_ACCESS 0x43 - #define IPMI_GET_USER_ACCESS 0x44 - #define IPMI_SET_USER_NAME 0x45 ---- ipmitool-1.8.9-rc1/src/plugins/lanplus/lanplus.c.orig 2006-08-03 18:26:06.000000000 +0200 -+++ ipmitool-1.8.9-rc1/src/plugins/lanplus/lanplus.c 2006-08-25 16:06:37.000000000 +0200 -@@ -862,7 +862,7 @@ - /* - * read_open_session_reponse - * -- * Initialize the ipmi_rs from the IMPI 2.x open session response data. -+ * Initialize the ipmi_rs from the IPMI 2.x open session response data. - * - * The offset should point to the first byte of the the Open Session Response - * payload when this function is called. -@@ -924,7 +924,7 @@ - /* - * read_rakp2_message - * -- * Initialize the ipmi_rs from the IMPI 2.x RAKP 2 message -+ * Initialize the ipmi_rs from the IPMI 2.x RAKP 2 message - * - * The offset should point the first byte of the the RAKP 2 payload when this - * function is called. -@@ -1004,7 +1004,7 @@ - /* - * read_rakp4_message - * -- * Initialize the ipmi_rs from the IMPI 2.x RAKP 4 message -+ * Initialize the ipmi_rs from the IPMI 2.x RAKP 4 message - * - * The offset should point the first byte of the the RAKP 4 payload when this - * function is called. -@@ -1212,7 +1212,7 @@ - /* - * read_ipmi_response - * -- * Initialize the impi_rs from with the IPMI response specific data -+ * Initialize the ipmi_rs from with the IPMI response specific data - * - * The offset should point the first byte of the the IPMI payload when this - * function is called. -@@ -1244,7 +1244,7 @@ - /* - * read_sol_packet - * -- * Initialize the impi_rs with the SOL response data -+ * Initialize the ipmi_rs with the SOL response data - * - * The offset should point the first byte of the the SOL payload when this - * function is called. -@@ -1562,32 +1562,32 @@ - *------------------------------------------ - */ - /* ipmi session Auth Type / Format is always 0x06 for IPMI v2 */ -- msg[IMPI_LANPLUS_OFFSET_AUTHTYPE] = 0x06; -+ msg[IPMI_LANPLUS_OFFSET_AUTHTYPE] = 0x06; - - /* Payload Type -- also specifies whether were authenticated/encyrpted */ -- msg[IMPI_LANPLUS_OFFSET_PAYLOAD_TYPE] = payload->payload_type; -+ msg[IPMI_LANPLUS_OFFSET_PAYLOAD_TYPE] = payload->payload_type; - - if (session->v2_data.session_state == LANPLUS_STATE_ACTIVE) - { -- msg[IMPI_LANPLUS_OFFSET_PAYLOAD_TYPE] |= -+ msg[IPMI_LANPLUS_OFFSET_PAYLOAD_TYPE] |= - ((session->v2_data.crypt_alg != IPMI_CRYPT_NONE )? 0x80 : 0x00); -- msg[IMPI_LANPLUS_OFFSET_PAYLOAD_TYPE] |= -+ msg[IPMI_LANPLUS_OFFSET_PAYLOAD_TYPE] |= - ((session->v2_data.integrity_alg != IPMI_INTEGRITY_NONE)? 0x40 : 0x00); - } - - if (session->v2_data.session_state == LANPLUS_STATE_ACTIVE) - { - /* Session ID -- making it LSB */ -- msg[IMPI_LANPLUS_OFFSET_SESSION_ID ] = session->v2_data.bmc_id & 0xff; -- msg[IMPI_LANPLUS_OFFSET_SESSION_ID + 1] = (session->v2_data.bmc_id >> 8) & 0xff; -- msg[IMPI_LANPLUS_OFFSET_SESSION_ID + 2] = (session->v2_data.bmc_id >> 16) & 0xff; -- msg[IMPI_LANPLUS_OFFSET_SESSION_ID + 3] = (session->v2_data.bmc_id >> 24) & 0xff; -+ msg[IPMI_LANPLUS_OFFSET_SESSION_ID ] = session->v2_data.bmc_id & 0xff; -+ msg[IPMI_LANPLUS_OFFSET_SESSION_ID + 1] = (session->v2_data.bmc_id >> 8) & 0xff; -+ msg[IPMI_LANPLUS_OFFSET_SESSION_ID + 2] = (session->v2_data.bmc_id >> 16) & 0xff; -+ msg[IPMI_LANPLUS_OFFSET_SESSION_ID + 3] = (session->v2_data.bmc_id >> 24) & 0xff; - - /* Sequence Number -- making it LSB */ -- msg[IMPI_LANPLUS_OFFSET_SEQUENCE_NUM ] = session->out_seq & 0xff; -- msg[IMPI_LANPLUS_OFFSET_SEQUENCE_NUM + 1] = (session->out_seq >> 8) & 0xff; -- msg[IMPI_LANPLUS_OFFSET_SEQUENCE_NUM + 2] = (session->out_seq >> 16) & 0xff; -- msg[IMPI_LANPLUS_OFFSET_SEQUENCE_NUM + 3] = (session->out_seq >> 24) & 0xff; -+ msg[IPMI_LANPLUS_OFFSET_SEQUENCE_NUM ] = session->out_seq & 0xff; -+ msg[IPMI_LANPLUS_OFFSET_SEQUENCE_NUM + 1] = (session->out_seq >> 8) & 0xff; -+ msg[IPMI_LANPLUS_OFFSET_SEQUENCE_NUM + 2] = (session->out_seq >> 16) & 0xff; -+ msg[IPMI_LANPLUS_OFFSET_SEQUENCE_NUM + 3] = (session->out_seq >> 24) & 0xff; - } - - /* -@@ -1679,9 +1679,9 @@ - } - - /* Now we know the payload length */ -- msg[IMPI_LANPLUS_OFFSET_PAYLOAD_SIZE ] = -+ msg[IPMI_LANPLUS_OFFSET_PAYLOAD_SIZE ] = - payload->payload_length & 0xff; -- msg[IMPI_LANPLUS_OFFSET_PAYLOAD_SIZE + 1] = -+ msg[IPMI_LANPLUS_OFFSET_PAYLOAD_SIZE + 1] = - (payload->payload_length >> 8) & 0xff; - - -@@ -1745,14 +1745,14 @@ - 2; - - if (verbose > 2) -- printbuf(msg + IMPI_LANPLUS_OFFSET_AUTHTYPE, hmac_input_size, "authcode input"); -+ printbuf(msg + IPMI_LANPLUS_OFFSET_AUTHTYPE, hmac_input_size, "authcode input"); - - - /* Auth Code */ - lanplus_HMAC(session->v2_data.integrity_alg, - session->v2_data.k1, /* key */ - 20, /* key length */ -- msg + IMPI_LANPLUS_OFFSET_AUTHTYPE, /* hmac input */ -+ msg + IPMI_LANPLUS_OFFSET_AUTHTYPE, /* hmac input */ - hmac_input_size, - hmac_output, - &hmac_length); -@@ -2529,7 +2529,7 @@ - * ipmi_get_auth_capabilities_cmd - * - * This command may have to be sent twice. We first ask for the -- * authentication capabilities with the "request IMPI v2 data bit" -+ * authentication capabilities with the "request IPMI v2 data bit" - * set. If this fails, we send the same command without that bit - * set. - * -@@ -2602,7 +2602,7 @@ - - - static int --impi_close_session_cmd(struct ipmi_intf * intf) -+ipmi_close_session_cmd(struct ipmi_intf * intf) - { - struct ipmi_rs * rsp; - struct ipmi_rq req; -@@ -2836,7 +2836,7 @@ - /* - * ipmi_lanplus_rakp1 - * -- * Build and send the RAKP 1 message as part of the IMPI v2 / RMCP+ session -+ * Build and send the RAKP 1 message as part of the IPMI v2 / RMCP+ session - * negotiation protocol. We also read and validate the RAKP 2 message received - * from the BMC, here. See section 13.20 of the IPMI v2 specification for - * details. -@@ -2990,7 +2990,7 @@ - /* - * ipmi_lanplus_rakp3 - * -- * Build and send the RAKP 3 message as part of the IMPI v2 / RMCP+ session -+ * Build and send the RAKP 3 message as part of the IPMI v2 / RMCP+ session - * negotiation protocol. We also read and validate the RAKP 4 message received - * from the BMC, here. See section 13.20 of the IPMI v2 specification for - * details. -@@ -3154,7 +3154,7 @@ - ipmi_lanplus_close(struct ipmi_intf * intf) - { - if (!intf->abort) -- impi_close_session_cmd(intf); -+ ipmi_close_session_cmd(intf); - - if (intf->fd >= 0) - close(intf->fd); ---- ipmitool-1.8.9-rc1/src/plugins/lanplus/lanplus.h.orig 2005-03-17 00:17:37.000000000 +0100 -+++ ipmitool-1.8.9-rc1/src/plugins/lanplus/lanplus.h 2005-10-23 16:09:48.000000000 +0200 -@@ -84,11 +84,11 @@ - - - /* Session message offsets, from table 13-8 of the v2 specification */ --#define IMPI_LANPLUS_OFFSET_AUTHTYPE 0x04 --#define IMPI_LANPLUS_OFFSET_PAYLOAD_TYPE 0x05 --#define IMPI_LANPLUS_OFFSET_SESSION_ID 0x06 --#define IMPI_LANPLUS_OFFSET_SEQUENCE_NUM 0x0A --#define IMPI_LANPLUS_OFFSET_PAYLOAD_SIZE 0x0E -+#define IPMI_LANPLUS_OFFSET_AUTHTYPE 0x04 -+#define IPMI_LANPLUS_OFFSET_PAYLOAD_TYPE 0x05 -+#define IPMI_LANPLUS_OFFSET_SESSION_ID 0x06 -+#define IPMI_LANPLUS_OFFSET_SEQUENCE_NUM 0x0A -+#define IPMI_LANPLUS_OFFSET_PAYLOAD_SIZE 0x0E - #define IPMI_LANPLUS_OFFSET_PAYLOAD 0x10 - - ---- ipmitool-1.8.9-rc1/src/plugins/lanplus/lanplus_crypt.c.orig 2005-03-24 02:46:03.000000000 +0100 -+++ ipmitool-1.8.9-rc1/src/plugins/lanplus/lanplus_crypt.c 2005-10-23 16:10:06.000000000 +0200 -@@ -800,8 +800,8 @@ - lanplus_HMAC(session->v2_data.integrity_alg, - session->v2_data.k1, - IPMI_AUTHCODE_BUFFER_SIZE, -- rs->data + IMPI_LANPLUS_OFFSET_AUTHTYPE, -- rs->data_len - IMPI_LANPLUS_OFFSET_AUTHTYPE - IPMI_SHA1_AUTHCODE_SIZE, -+ rs->data + IPMI_LANPLUS_OFFSET_AUTHTYPE, -+ rs->data_len - IPMI_LANPLUS_OFFSET_AUTHTYPE - IPMI_SHA1_AUTHCODE_SIZE, - generated_authcode, - &generated_authcode_length); - -@@ -809,8 +809,8 @@ - { - lprintf(LOG_DEBUG+2, "Validating authcode"); - printbuf(session->v2_data.k1, 20, "K1"); -- printbuf(rs->data + IMPI_LANPLUS_OFFSET_AUTHTYPE, -- rs->data_len - IMPI_LANPLUS_OFFSET_AUTHTYPE - IPMI_SHA1_AUTHCODE_SIZE, -+ printbuf(rs->data + IPMI_LANPLUS_OFFSET_AUTHTYPE, -+ rs->data_len - IPMI_LANPLUS_OFFSET_AUTHTYPE - IPMI_SHA1_AUTHCODE_SIZE, - "Authcode Input Data"); - printbuf(generated_authcode, 12, "Generated authcode"); - printbuf(bmc_authcode, 12, "Expected authcode"); -- cgit v1.2.3